BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15634 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

5011

BIS, Central Laboratory (CL)

None

IS 1695 (2024)

Sunset yellow FCF, food grade - Specification (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Test for Colour- IS 1695:2024)	-
3.3 and 7 Table 1 (i) (Total dye content - IS 1695:2024)	-
3.3 and 7 Table 1 (ii) (Loss on drying at 135° C and Chlorides and sulphates - IS 1699: 1995)	-
3.3 and 7 Table 1 (iii) (Water Insoluble Matter- IS 1699:1995)	-
3.3 and 7 Table 1 (iv) (Combined ether extracts- IS 1699:1995)	-
3.3 and 7 Table 1 (ix) (Lead - IS 1699:1995)	-
3.3 and 7 Table 1 (x) (Arsenic- IS 1699:1995)	-
3.3 and 7 Table 1 (xi) (Mercury - IS 1699:1995)	-
3.3 and 7 Table 1 (xii) (Copper - IS 1699:1995)	-
3.3 and 7 Table 1 (xiii) (Chromium - IS 1699:1995)	-
3.3 and 7 Table 1 (xiv) (Cadmium - IS 1699:1995)	-

-
-

5012

BIS, Central Laboratory (CL)

None

IS 1694 (2024)

Tartrazine, food grade - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 Table 1 (i) (Total dye content - IS 1694:2024)	-
3.1 Table 1 (ii) (Loss on drying at 135° C and Chlorides and sulphates - IS 1699: 1995)	-
3.1 Table 1 (iii) (Water Insoluble Matter- IS 1699:1995)	-
3.1 Table 1 (iv) (Combined ether extracts- IS 1699:1995)	-
3.1 Table 1 (vii) (Lead - IS 1699:1995)	-
3.1 Table 1 (viii) (Arsenic- IS 1699:1995)	-
3.1 Table 1 (ix) (Mercury - IS 1699:1995)	-
3.1 Table 1 (x) (Copper - IS 1699:1995)	-
3.1 Table 1 (xi) (Chromium - IS 1699:1995)	-
3.1 Table 1 (xii) (Cadmium - IS 1699:1995)	-
3.1 Table 1 (viii) (Arsenic- IS 1699:1995)	-

-
-

5013

BIS, Central Laboratory (CL)

None

IS 15219 (2024)

Aluminium phosphide powder formulation - Specification (first revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2.1 (Description - IS 15219:2002)	-
3.3.1 (Aluminium Phosphide Content - IS 6438:1980)	-

-
-

5014

BIS, Central Laboratory (CL)

None

IS 12300 (2024)

Gas Cylinder Valves for Small Refrigerant Cylinders -Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-3.1 (Chemical Composition)	-

-
-

5015

Atckon Laboratories LLP, Bahadurgarh

8186436

IS 456 (2000)

Plain and reinforced concrete - Code of practice (Fourth Revision)

ALL

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.4-Table-1 (v)-IS: 3025(P-17)(Suspended matter)	-	500	-
5.4-Table-1 (iv)-IS: 3025(P-32)(Chloride)	-	500	-
5.4-Table-1 (iii)-IS: 3025(P-32)(Chloride)	-	500	-
5.4-Table-1 (ii)-IS: 3025(P-24)(Sulphate)	-	500	-
5.4-Table-1 (i)-IS: 3025(P-18)(In-Organic)	-	500	-
5.4-Table-1 (i)-IS: 3025(P-18)(Organic )	-	500	-
5.4.2-IS: 3025(P-11)(Ph)	-	500	-
5.4-(b)-IS: 3025 (P-23)(Volume of 0.02 N H2SO4 to neutralized 100 ml of water using mixed indicator)	-	500	-
5.4-(a)-IS: 3025 (P-22)(Volume of 0.02 N NaOH to neutralized 100 ml of water using phenolphthalein indicator)	-	500	-
Cl 5.4 Table 1 (v)(Suspended Matter)	-	500	-
Cl 5.4 Table 1 (iv)(Chloride)	-	500	-
Cl 5.4 Table 1 (iii)(Sulphate)	-	500	-
Cl 5.4 Table 1 (ii)(Inorganic Solids)	-	500	-
Cl 5.4 Table 1 (i)(Organic Solids)	-	500	-
Cl 5.4 .2(pH)	-	500	-
Cl 5.4 (b)(Alkalinity)	-	500	-
Cl 5.4 (a)(Acidity)	-	500	-
16.1(Average Compressive Strength)	-	500	-
16.1(Compressive Strength of Individual Samples )	-	500	-
16.1(Compressive Strength of Individual Samples )	-	500	-
16.1(Compressive Strength of Individual Samples )	-	0	-
Clause 5.4(Description)	-	0	-
5.1(Cement)	-	0	-
5.2(Mineral Admixtures)	-	0	-
5.3(Aggregates)	-	0	-
5.6(Reinforcement)	-	0	-
5.7(Storage of Materials)	-	0	-
7(Workability of Concrete)	-	0	-
8(Durability of concrete)	-	0	-
9(Concrete mix proportioning)	-	0	-
16.2(Flexural Strength)	-	0	-
17.4(Core test)	-	0	-
cl 5.4.4.3(Initial Setting Time)	-	0	-
cl 5.4.4.3(Initial Setting Time)	-	0	-

-
Included w.e.f 18.08.2025 For construction water only For compressive strength only

5016

ELCA Laboratories, Navi Mumbai

7169736

IS/IEC 60079 : PART 31 (2022)

Explosive atmospheres - Part 31: Equipment dust ignition protection by enclosure ''t'' (Second Revision)

65000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1.1.1(General)	-	28000	-
6.1.1.2(Impact test on supplementary internal enclosures)	-	3000	-
6.1.1.3(Pressure test)	-	1500	-
6.1.1.4(IP test)	-	12500	Up to 10 Litre : 7000.00 Up to 20 Litre : 9000.00 above 20 litre : 12500.00
6.1.2(Tests to determine maximum surface temperature)	-	15000	-
6.1.1.1(General)	-	28000	-
6.1.1.2(Impact test on supplementary internal enclosures)	-	3000	-
6.1.1.3(Pressure test)	-	1500	-
6.1.1.4(IP test)	-	12500	-
6.1.2(Tests to determine maximum surface temperature)	-	15000	-
6.1.1.1(General)	-	28000	-
6.1.1.2(Impact test on supplementary internal enclosures)	-	3000	-
6.1.1.3(Pressure test)	-	1500	-
6.1.1.4(IP test)	-	12500	-
6.1.2(Tests to determine maximum surface temperature)	-	15000	-
6.1.1.1(General)	-	28000	-
6.1.1.2(Impact test on supplementary internal enclosures)	-	3000	-
6.1.1.3(Pressure test)	-	1500	-
6.1.1.4(IP test)	-	12500	-
6.1.2(Tests to determine maximum surface temperature)	-	15000	-
6.1.1.1(General)	-	28000	-
6.1.1.2(Impact test on supplementary internal enclosures)	-	3000	-
6.1.1.3(Pressure test)	-	1500	-
6.1.1.4(IP test)	-	12500	-
6.1.2(Tests to determine maximum surface temperature)	-	15000	-
6.1.1.1(General)	-	28000	-
6.1.1.2(Impact test on supplementary internal enclosures)	-	3000	-
6.1.1.3(Pressure test)	-	1500	-
6.1.1.4(IP test)	-	12500	-
6.1.2(Tests to determine maximum surface temperature)	-	15000	-

02 Feb, 2028

-
Included w.e.f 11.12.2025

5017

ARYAVRAT TEST HOUSE PRIVATE LIMITED

5191706

IS 398 : Part 4 (1994)

Aluminium conductors for overhead transmission purposes: Part 4 aluminium alloy stranded conductors (Aluminium - Magnesium - Silicon Type) - Specification (Third Revision)

15 mm² to 767 mm²

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Freedom from Defects)	-	100	-
7.1 Table-1(Dimensional measurement of wires)	-	100	( For Each Wire )
7.2.2 Table-2, Table-4(Calculated resistance of Stranded Conductor)	-	500	-
8.1(Joints in wires-Conductors Containing Seven Wires)	-	100	-
8.2(Joints in wires-Conductors Containing More Than Seven Wires)	-	300	-
9.1(Stranding)	-	500	-
9.2 Table 3(Lay Ratio of stranded conductors)	-	250	( For Each Layer )
9.3(Direction of Lay)	-	100	-
9.4(Multiple layers of wires)	-	100	-
11(Packing and Marking)	-	100	-
12.2 Table 1(Breaking Load Test- Before Stranding)	-	500	-
12.2 Table 1(Breaking Load Test- After Stranding)	-	500	-
12.3 Table 1(Elongation Test- Before Stranding)	-	500	-
12.3 Table 1(Elongation Test- After Stranding)	-	500	-
12.4 Table 1(Resistance of Aluminium wire)	-	500	-
9.2(Lay Ratio 24 wire layer)	-	100	-
9.2(Lay Ratio 18 wire layer)	-	100	-
9.2(Lay Ratio 12 wire layer)	-	100	-
9.2(Lay Ratio 3/6 wire layer)	-	100	-
7.2.1(Sizes)	-	500	-
Cl-7.2 (7.2.1, 7.2.2), Table-2(Stranding and Wire Dia)	-	500	-
Cl- 7.2 (7.2.1, 7.2.2), Table-2(Approx Overall Dia)	-	100	-
Cl. 7.2 (7.2.1, 7.2.2), Table 2(Approx Mass)	-	500	-
Cl- 7.2 (7.2.1, 7.2.2), Table-2(Calculated Maximum Resistance at 20°C)	-	500	-
Cl- 7.2 (7.2.1, 7.2.2), Table-2(Approx Calculated Breaking Load)	-	500	-

28 Nov, 2028

-
-

5018

EMC Testing and Compliance LLP, Gurugram

8141526

IS/IEC 62368 : Part 1 (2023)

Audio Video Information and Communication Technology Equipment - Part 1: Safety Requirements (Second Revision)

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(General- materials, components)	-	1000	-
Cl-4.2(Energy source classifications)	-	1000	-
Cl-4.3(Protection against energy sources)	-	2000	-
Cl-4.4(Safeguards)	-	1000	-
Cl-4.6(Fixing of conductors and conductive parts)	-	2000	-
Cl-4.7(Equipment for direct insertion into mains socket-outlets)	-	2000	-
Cl-4.8(Equipment containing coin or button cell batteries)	-	2000	-
Cl-4.9(Likelihood of fire or shock due to entry of conductive objects)	-	2000	-
Cl-4.10(Components requirements)	-	2000	-
Cl-5.1(General- Electrically-caused injury)	-	2000	-
Cl-5.2(Classification and limits of electrical energy sources)	-	2000	-
Cl-5.3(Protection against electrical energy sources)	-	2000	-
Cl-5.4(Insulation materials and requirements)	-	2000	-
Cl-5.5(Components as safeguards)	-	2000	-
Cl-5.6(Protective conductor)	-	2000	-
Cl-5.7(Prospective touch voltage, touch current and protective conductor current)	-	2000	-
Cl-5.8(Backfeed safeguard in battery backed up supplies)	-	1000	-
Cl-6.1(General- Electrically-caused fire)	-	1000	-
Cl-6.2(Classification of power sources and potential ignition sources)	-	2000	-
Cl-6.3(Safeguards against fire under normal operating conditions and abnormal operating conditions)	-	2000	-
Cl-6.4(Safeguards against fire under single fault conditions)	-	2000	-
Cl-7.1(General- Injury caused by hazardous substances)	-	2000	-
Cl-7.2(Reduction of exposure to hazardous substances)	-	2000	-
Cl-7.3(Ozone exposure)	-	2000	-
Cl-7.4(Use of personal safeguards or personal protective equipment (PPE)	-	2000	-
Cl-7.5(Use of instructional safeguards and instructions)	-	2000	-
Cl-8.1(General- Mechanically-caused injury)	-	1000	-
Cl-8.2(Mechanical energy source classifications)	-	2000	-
Cl-8.3(Safeguards against mechanical energy sources)	-	2000	-
Cl-8.4(Safeguards against parts with sharp edges and corners)	-	2000	-
Cl-8.5(Safeguards against moving parts)	-	2000	-
Cl-8.6(Stability of equipment)	-	1000	-
Cl-8.7(Equipment mounted to a wall, ceiling or other structure)	-	2000	-
Cl-8.8(Handle strength)	-	2000	-
Cl-8.9(Wheels or casters attachment requirements)	-	2000	-
Cl-8.10(Carts, stands, and similar carriers)	-	2000	-
Cl-8.11(Mounting means for slide-rail mounted equipment (SRME))	-	2000	-
Cl-9.1(General-Thermal burn injury)	-	1000	-
Cl-9.2(Thermal energy source classifications)	-	2000	-
Cl-9.3(Touch temperature limits)	-	2000	-
Cl-9.4(Safeguards against thermal energy sources)	-	2000	-
Cl-9.5(Requirements for safeguards)	-	2000	-
Cl-9.6(Requirements for wireless power transmitters)	-	2000	-
Cl-10.1(General-Radiation)	-	2000	-
Cl-10.2(Radiation energy source classifications)	-	2000	-
Cl-10.3(Safeguards against laser radiation)	-	2000	-
Cl-10.4("Safeguards against optical radiation from lamps and lamp systems (including LED types)")	-	2000	-
Annex A(Examples of equipment within the scope of this document)	-	2000	-
Annex B(General- Normal operating condition tests, abnormal operating condition tests and single fault condition tests)	-	2000	-
Annex B-2(Normal operating conditions)	-	2000	-
Annex B-3(Simulated abnormal operating conditions)	-	2000	-
Annex B-4(Simulated single fault conditions)	-	2000	-
Annex D-1(Impulse test generators)	-	2000	-
Annex E-1(Electrical energy source classification for audio signals)	-	2000	-
Annex E-3(Operating conditions of equipment containing an audio amplifier)	-	2000	-
Annex F-1(General-Equipment markings, instructions, and instructional safeguards)	-	2000	-
Annex F-2(Letter symbols and graphical symbols)	-	1000	-
Annex F-3(Equipment markings)	-	1000	-
Annex F-4(Instructions)	-	1000	-
Annex F-5(Instructional safeguards)	-	1000	-
Annex G-1(Switches)	-	1000	-
Annex G-2(Relays)	-	1000	-
Annex G-3(Protective devices)	-	2000	-
Annex G-4(Connectors)	-	2000	-
Annex G-5(Wound components)	-	1000	-
Annex G-6(Wire insulation)	-	1000	-
Annex G-7(Mains power supply cords and interconnection cables)	-	2000	-
Annex G-8(Varistors)	-	1000	-
Annex G-9(Integrated circuit (IC) current limiters)	-	2000	-
Annex G-10(Resistors)	-	2000	-
Annex G-11(Capacitors and RC units)	-	2000	-
Annex G-12(Optocouplers)	-	2000	-
Annex G-13(Printed boards)	-	2000	-
Annex G-14(Coatings on component terminals)	-	2000	-
Annex H-1(General- Criteria for telephone ringing signals)	-	2000	-
Annex I(Overvoltage categories (see IEC 60364-4-44))	-	2000	-
Annex J-1(General-Insulated winding wires for use without interleaved insulation)	-	2000	-
Annex J-2(Type tests)	-	2000	-
Annex J-3(Testing during manufacturing)	-	2000	-
Annex K-1(General- Safety interlocks)	-	2000	-
Annex K-2(Components of the safety interlock safeguard mechanism)	-	2000	-
Annex K-3(Inadvertent change of operating mode)	-	2000	-
Annex K-4(Interlock safeguard override)	-	2000	-
Annex L-1(General requirements)	-	2000	-
Annex L-2(Permanently connected equipment)	-	2000	-
Annex L-3()	-	2000	-
Annex L-4(Single-phase equipment)	-	2000	-
Annex L-5(Three-phase equipment)	-	2000	-
Annex L-6(Switches as disconnect devices)	-	2000	-
Annex L-7(Plugs as disconnect devices)	-	2000	-
Annex L-8(Multiple power sources)	-	2000	-
Annex L-9(Compliance criteria)	-	2000	-
Annex M-1(General requirements)	-	2000	-
Annex M-2(Safety of batteries and their cells)	-	2000	-
Annex M-6(Safeguards against short-circuits)	-	2000	-
Annex M-9(Preventing electrolyte spillage)	-	2000	-
Annex M-10(Instructions to prevent reasonably foreseeable misuse)	-	2000	-
Annex N(Electrochemical potentials (V))	-	2000	-
Annex O(Measurement of creepage distances and clearances)	-	2000	-
Annex P-1(General-Safeguards against conductive objects)	-	2000	-
Annex P-2(Safeguards against entry or consequences of entry of a foreign object)	-	2000	-
Annex P-3(Safeguards against spillage of internal liquids)	-	2000	-
Annex Q-1(Limited power source)	-	2000	-
Annex Q-2(Test for external circuits – paired conductor cable)	-	2000	-
Annex S-1(Flammability test for fire enclosure and fire barrier materials of equipment where the steady state power does not exceed 4 000 W)	-	2000	-
Annex S-2(Flammability test for fire enclosure and fire barrier integrity)	-	2000	-
Annex S-4(Flammability classification of materials)	-	2000	-
Annex S-5(Flammability test for fire enclosure materials of equipment with a steady state power exceeding 4 000 W)	-	2000	-
Annex T-1(General-Mechanical strength tests)	-	2000	-
Annex T-2(Steady force test, 10 N)	-	2000	-
Annex T-3(Steady force test, 30 N)	-	2000	-
Annex T-4(Steady force test, 100 N)	-	2000	-
Annex T-5(Steady force test, 250 N)	-	2000	-
Annex T-6(Enclosure impact test)	-	2000	-
Annex T-8(Stress relief test)	-	2000	-
Annex T-9(Glass impact test)	-	2000	-
Annex T-10(Glass fragmentation test)	-	2000	-
Annex T-11(Test for telescoping or rod antennas)	-	2000	-
Annex V-1(Accessible parts of equipment)	-	2000	-
Annex V-2(Accessible part criterion)	-	2000	-
Annex W(Comparison of terms introduced in this document)	-	2000	-
Annex X("Alternative method for determining clearances for insulation in circuits connected to an AC mains not exceeding 420 V peak (300 V RMS)")	-	2000	-
Annex Y-1(General- Construction requirements for outdoor enclosures)	-	2000	-
Annex Y-2(Resistance to UV radiation)	-	2000	-
Annex Y-3(Resistance to corrosion)	-	2000	-
Annex E-2(Audio signals used during test)	-	2000	-
Annex H-2(Method A)	-	2000	-
Annex H-3(Method B)	-	2000	-
Annex S-3(Flammability tests for the bottom of a fire enclosure)	-	2000	-
Cl-6.5(Internal and external wiring)	-	2000	-
Annex C-1(Protection of materials in equipment from UV radiation)	-	2000	-
Annex C-2(UV light conditioning test)	-	2000	-
Annex G-16(IC that includes a capacitor discharge function (ICX))	-	2000	-
Annex K-5(Fail-safe)	-	2000	-
Annex K-6(Mechanically operated safety interlocks)	-	2000	-
Annex K-7(Interlock circuit isolation)	-	2000	-
Annex M-3(Protection circuits for batteries provided within the equipment)	-	2000	-
Annex M-4(Additional safeguards for equipment containing a secondary lithium battery)	-	2000	-
Annex M-5(Risk of burn due to short-circuit during carrying)	-	2000	-
Annex P-4(Metallized coatings and adhesives securing parts)	-	2000	-
Annex R(Limited short-circuit test)	-	2000	-
Annex T-7(Drop test)	-	2000	-
Annex Y-5(Protection of equipment within an outdoor enclosure)	-	2000	-
Annex Y-6(Mechanical strength of enclosures)	-	2000	-

19 Jul, 2027

-
Included w.e.f.04.08.2025 Exclusion Cl-4.5 (Explosion) Cl-10.4 ("Safeguards against optical radiation from lamps and lamp systems (including LED types)") Cl-10.5 (Safeguards against X-radiation) Cl-10.6 (Safeguards against acoustic energy sources) Annex D-2 (Antenna interface test generator) Annex D-3 (Electronic pulse generator) Annex G-15 (Pressurized liquid filled components or LFC assemblies) Annex M-7 (Risk of explosion from lead acid and NiCd batteries) Annex M-8 ("Protection against internal ignition from external spark sources of rechargeable batteries with aqueous electrolyte") Annex S-6 (Grille covering material, cloth, and reticulated foam) Annex U ("Mechanical strength of CRTs and protection against the effects of implosion") Annex Y-4 (Gaskets)

5019

Eminent International Testing Center Private Limited

6190736

IS 16982 (2018)

Heat strengthened glass - Specification

Heat Strengthened Glass

49300.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.3(Thickness test)	-	5125.00	Testing Charges for Thickness Measurement
4.4(Dimension and Squarenes test)	-	5200.00	Combined Testing Charges for Dimension and Squareness
4.7(Overall Bow)	-	6350.00	Combined Testing Charges for Flatness test
4.7(measurement of wave and roller wave)	-	6550.00	Combined Testing Charges for Flatness test
4.7(Edge lift test)	-	655.00	Combined Testing Charges for Flatness test
4.7(Local distortion test)	-	6550.00	Combined Testing Charges for Flatness test
4.5(Fragmentation test)	-	6150.00	Testing Charges for Fragmentation Test
4.5(Surface compression)	-	6825.00	Testing Charges for Surface Compression Test

-
a) 4.2 - Distribution of Allowable Defects b) 4.6 - Mechanical Strength (Optional Test)

5020

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 6912 (2005)

Copper and copper alloys forging stock and forging - Specification (Second Revision)

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. No.4(SUPPLY OF MATERIAL)	-	4000	For dimensional and other qualitative tests
Cl. No.6(Freedom from defects)	-	4000	For dimensional and other qualitative tests
Cl. No.7, Table no. 1("DIMENSIONS AND TOLERANCES ")	-	4000	For dimensional and other qualitative tests
Cl. No.8.1, Table no.2(i)(Electrolytic tough pitch through copper)	-	4000	For dimensional and other qualitative tests
Cl. No.8.1, Table no.2(ii)(Fire refined high conductivity copper)	-	4000	For dimensional and other qualitative tests
Cl. No.8.1, Table no.2(iii)(Phosporus deoxidised arsenical copper)	-	4000	For dimensional and other qualitative tests
Cl. No.8.1, Table no.3(Chemical Composition and Mechanical Properties of Brasses)	-	4000	For chemical test
Cl.no.8.1, Table no. 4(Chemical Composition and Mechanical Properties of Bronzes)	-	3999.98	For chemical test
Cl.no.9(Mechanical properties)	-	4000	For mechanical test
Cl.no.10(Forgability Test)	-	4000	For dimensional and other qualitative tests
Cl. No. 11(Mercurous Nitrate Test (For Forgings))	-	4000	For dimensional and other qualitative tests
Cl. No.15(Marking)	-	4000	For dimensional and other qualitative tests
Cl. No.4(SUPPLY OF MATERIAL)	-	4000	For dimensional and other qualitative tests
Cl. No.6(Freedom from defects)	-	4000	For dimensional and other qualitative tests
Cl. No.7, Table no. 1("DIMENSIONS AND TOLERANCES ")	-	4000	For dimensional and other qualitative tests
Cl. No.8.1, Table no.2(i)(Electrolytic tough pitch through copper)	-	4000	For dimensional and other qualitative tests
Cl. No.8.1, Table no.2(ii)(Fire refined high conductivity copper)	-	4000	For dimensional and other qualitative tests
Cl. No.8.1, Table no.2(iii)(Phosporus deoxidised arsenical copper)	-	4000	For dimensional and other qualitative tests
Cl. No.8.1, Table no.3(Chemical Composition and Mechanical Properties of Brasses)	-	4000	For chemical test
Cl.no.8.1, Table no. 4(Chemical Composition and Mechanical Properties of Bronzes)	-	4000	For chemical test
Cl.no.9(Mechanical properties)	-	4000	For mechanical test
Cl.no.10(Forgability Test)	-	4000	For dimensional and other qualitative tests
Cl. No. 11(Mercurous Nitrate Test (For Forgings))	-	4000	For dimensional and other qualitative tests
Cl. No.15(Marking)	-	4000	For dimensional and other qualitative tests
As per Clause 12.1.1(For Forging Stock)	-	4000	For dimensional and other qualitative tests
As per Clause 12.1.2(For Forging)	-	4000	For dimensional and other qualitative tests
As per Clause 13.1.1(Forging Stock)	-	4000	For dimensional and other qualitative tests
As per Clause 13.1.2(Hot Worked Material)	-	4000	For dimensional and other qualitative tests
As per Clause 13.1.3(Cold Worked Material)	-	4000	For dimensional and other qualitative tests
As per Clause 13.1.4(Cast Material)	-	4000	For dimensional and other qualitative tests
As per Clause 13.1.5(Diameter or Width Across flats greater than 28 mm)	-	4000	For dimensional and other qualitative tests

-
Included w.e.f 22.07.2025

5021

EDWARD FOOD RESEARCH & ANALYSIS CENTRE LIMITED

5127516

IS 15410 (2025)

PLASTIC BOTTLES/CONTAINERS FOR PACKAGING OF NATURAL MINERAL WATER AND PACKAGED DRINKING WATER - SPECIFICATION (first revision)

13100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4.1.1(Materials for Primary Packaging (Container))	-	150	N.A.
Clause 4.1.2.1(Material for Closures (a) Closure materials (Aluminium))	-	300	N.A.
Clause 4.1.2.1(Material for Closures (b) Plastic Materials)	-	150	N.A.
Clause 4.1.2.1(Material for Closures (c) Combination of plastics and metal)	-	150	N.A.
Clause 4.2(Design, Shape and Dimensions)	-	150	N.A.
Clause 4.3("Manufacture, Workmanship, Finish and Appearance")	-	150	N.A.
Clause 4.4(Capacity (Nominal))	-	150	N.A.
Clause 4.4(Capacity (Brimfull))	-	150	N.A.
Clause 4.5(Wall Thickness Top)	-	150	N.A.
Clause 4.5(Wall Thickness Middle)	-	150	N.A.
Clause 4.5(Wall Thickness Bottom)	-	150	N.A.
Clause 4.6.1.1(Colour-Transparency)	-	150	N.A.
Clause 4.6.2(Leakage Test (Closure Leakage) cls. 6.1 of IS 2798)	-	150	N.A.
Clause 4.6.2(Leakage Test (Vibration Leakage) cls. 6.2 of IS 2798)	-	150	N.A.
Clause 4.6.3.1(Drop Impact test)	-	150	N.A.
Clause 4.6.3.2(Stack Load test)	-	150	N.A.
Clause 4.6.4.1(Overall Migration Container)	-	550	N.A.
Clause 4.6.4.1(Overall Migration Closure)	-	550	N.A.
Clause 4.6.4.3(Colour migration Container)	-	550	N.A.
Clause 4.6.4.3(Colour migration Closure)	-	550	N.A.
Clause 4.6.5(Water Potability Test (Taste))	-	500	N.A.
Clause 4.6.4.2(Specific Migration Container Antimony)	-	350	N.A.
Clause 4.6.4.2(Specific Migration Container Barium)	-	350	N.A.
Clause 4.6.4.2(Specific Migration Container Cobalt)	-	350	N.A.
Clause 4.6.4.2(Specific Migration Container Copper)	-	350	N.A.
Clause 4.6.4.2(Specific Migration Container Iron)	-	350	N.A.
Clause 4.6.4.2(Specific Migration Container Lithium)	-	350	N.A.
Clause 4.6.4.2(Specific Migration Container Manganese)	-	350	N.A.
Clause 4.6.4.2(Specific Migration Container Zinc)	-	350	N.A.
Clause 4.6.4.2(Specific Migration Container Phthalic acid, bis (2- ethylhexyl) ester (DEHP))	-	550	N.A.
Clause 4.6.4.2(Specific Migration Closure Barium)	-	350	N.A.
Clause 4.6.4.2(Specific Migration Closure Cobalt)	-	350	N.A.
Clause 4.6.4.2(Specific Migration Closure Copper)	-	350	N.A.
Clause 4.6.4.2(Specific Migration Closure Iron)	-	350	N.A.
Clause 4.6.4.2(Specific Migration Closure Lithium)	-	350	N.A.
Clause 4.6.4.2(Specific Migration Closure Manganese)	-	350	N.A.
Clause 4.6.4.2(Specific Migration Closure Antimony)	-	350	N.A.
Clause 4.6.4.2(Specific Migration Closure Phthalic acid, bis (2- ethylhexyl) ester (DEHP))	-	550	N.A.
Clause 4.6.5(Water Potability Test (odour))	-	200	N.A.
Clause 5.1(Marking)	-	200	N.A.
Clause 4.6.1.2(Colour-Tint)	-	200	N.A.
Clause 4.1.3(Materials for Primary Packaging-Wad)	-	200	N.A.
Clause 4.1.2.2(Materials for Primary Packaging-Closure colourants)	-	200	N.A.
Clause 4.1.2.3(Materials for Primary Packaging-Sleeves for the closure)	-	150	N.A.
Clause 4.6.4.2(Specific Migration Closure Zinc)	-	350	N.A.
Clause 4.1.1(Materials for Primary Packaging (Container))	-	0	Testing charge already mentioned above
Clause 4.1.2.1(Material for Closures (a) Closure materials (Aluminium))	-	0	Testing charge already mentioned above
Clause 4.1.2.1(Material for Closures (b) Plastic Materials)	-	0	Testing charge already mentioned above
Clause 4.1.2.1(Material for Closures (c) Combination of plastics and metal)	-	0	Testing charge already mentioned above
Clause 4.2(Design, Shape and Dimensions)	-	0	Testing charge already mentioned above
Clause 4.3("Manufacture, Workmanship, Finish and Appearance")	-	0	Testing charge already mentioned above
Clause 4.4(Capacity (Nominal))	-	0	Testing charge already mentioned above
Clause 4.4(Capacity (Brimfull))	-	0	Testing charge already mentioned above
Clause 4.5(Wall Thickness Top)	-	0	Testing charge already mentioned above
Clause 4.5(Wall Thickness Middle)	-	0	Testing charge already mentioned above
Clause 4.5(Wall Thickness Bottom)	-	0	Testing charge already mentioned above
Clause 4.6.1.1(Colour-Transparency)	-	0	Testing charge already mentioned above
Clause 4.6.2(Leakage Test (Closure Leakage) cls. 6.1 of IS 2798)	-	0	Testing charge already mentioned above
Clause 4.6.2(Leakage Test (Vibration Leakage) cls. 6.2 of IS 2798)	-	0	Testing charge already mentioned above
Clause 4.6.3.1(Drop Impact test)	-	0	Testing charge already mentioned above
Clause 4.6.3.2(Stack Load test)	-	0	Testing charge already mentioned above
Clause 4.6.4.1(Overall Migration Container)	-	0	Testing charge already mentioned above
Clause 4.6.4.1(Overall Migration Closure)	-	0	Testing charge already mentioned above
Clause 4.6.4.3(Colour migration Container)	-	0	Testing charge already mentioned above
Clause 4.6.4.3(Colour migration Closure)	-	0	Testing charge already mentioned above
Clause 4.6.5(Water Potability Test (Taste))	-	0	Testing charge already mentioned above
Clause 4.6.4.2(Specific Migration Container Antimony)	-	0	Testing charge already mentioned above
Clause 4.6.4.2(Specific Migration Container Barium)	-	0	Testing charge already mentioned above
Clause 4.6.4.2(Specific Migration Container Cobalt)	-	0	Testing charge already mentioned above
Clause 4.6.4.2(Specific Migration Container Copper)	-	0	Testing charge already mentioned above
Clause 4.6.4.2(Specific Migration Container Iron)	-	0	Testing charge already mentioned above
Clause 4.6.4.2(Specific Migration Container Lithium)	-	0	Testing charge already mentioned above
Clause 4.6.4.2(Specific Migration Container Manganese)	-	0	Testing charge already mentioned above
Clause 4.6.4.2(Specific Migration Container Zinc)	-	0	Testing charge already mentioned above
Clause 4.6.4.2(Specific Migration Container Phthalic acid, bis (2- ethylhexyl) ester (DEHP))	-	0	Testing charge already mentioned above
Clause 4.6.4.2(Specific Migration Closure Barium)	-	0	Testing charge already mentioned above
Clause 4.6.4.2(Specific Migration Closure Cobalt)	-	0	Testing charge already mentioned above
Clause 4.6.4.2(Specific Migration Closure Copper)	-	0	Testing charge already mentioned above
Clause 4.6.4.2(Specific Migration Closure Iron)	-	0	Testing charge already mentioned above
Clause 4.6.4.2(Specific Migration Closure Lithium)	-	0	Testing charge already mentioned above
Clause 4.6.4.2(Specific Migration Closure Manganese)	-	0	Testing charge already mentioned above
Clause 4.6.4.2(Specific Migration Closure Antimony)	-	0	Testing charge already mentioned above
Clause 4.6.4.2(Specific Migration Closure Phthalic acid, bis (2- ethylhexyl) ester (DEHP))	-	0	Testing charge already mentioned above
Clause 4.6.5(Water Potability Test (odour))	-	0	Testing charge already mentioned above
Clause 5.1(Marking)	-	0	Testing charge already mentioned above
Clause 4.6.1.2(Colour-Tint)	-	0	Testing charge already mentioned above
Clause 4.1.3(Materials for Primary Packaging-Wad)	-	0	Testing charge already mentioned above
Clause 4.1.2.2(Materials for Primary Packaging-Closure colourants)	-	0	Testing charge already mentioned above
Clause 4.1.2.3(Materials for Primary Packaging-Sleeves for the closure)	-	0	Testing charge already mentioned above
Clause 4.6.4.2(Specific Migration Closure Zinc)	-	0	Testing charge already mentioned above
Clause 4.1.1(Materials for Primary Packaging (Container))	-	0	Testing charge already mentioned above
Clause 4.1.2.1(Material for Closures (a) Closure materials (Aluminium))	-	0	Testing charge already mentioned above
Clause 4.1.2.1(Material for Closures (b) Plastic Materials)	-	0	Testing charge already mentioned above
Clause 4.1.2.1(Material for Closures (c) Combination of plastics and metal)	-	0	Testing charge already mentioned above
Clause 4.2(Design, Shape and Dimensions)	-	0	Testing charge already mentioned above
Clause 4.3("Manufacture, Workmanship, Finish and Appearance")	-	0	Testing charge already mentioned above
Clause 4.4(Capacity (Nominal))	-	0	Testing charge already mentioned above
Clause 4.4(Capacity (Brimfull))	-	0	Testing charge already mentioned above
Clause 4.5(Wall Thickness Top)	-	0	Testing charge already mentioned above
Clause 4.5(Wall Thickness Middle)	-	0	Testing charge already mentioned above
Clause 4.5(Wall Thickness Bottom)	-	0	Testing charge already mentioned above
Clause 4.6.1.1(Colour-Transparency)	-	0	Testing charge already mentioned above
Clause 4.6.2(Leakage Test (Closure Leakage) cls. 6.1 of IS 2798)	-	0	Testing charge already mentioned above
Clause 4.6.2(Leakage Test (Vibration Leakage) cls. 6.2 of IS 2798)	-	0	Testing charge already mentioned above
Clause 4.6.3.1(Drop Impact test)	-	0	Testing charge already mentioned above
Clause 4.6.3.2(Stack Load test)	-	0	Testing charge already mentioned above
Clause 4.6.4.1(Overall Migration Container)	-	0	Testing charge already mentioned above
Clause 4.6.4.1(Overall Migration Closure)	-	0	Testing charge already mentioned above
Clause 4.6.4.3(Colour migration Container)	-	0	Testing charge already mentioned above
Clause 4.6.4.3(Colour migration Closure)	-	0	Testing charge already mentioned above
Clause 4.6.5(Water Potability Test (Taste))	-	0	Testing charge already mentioned above
Clause 4.6.4.2(Specific Migration Container Antimony)	-	0	Testing charge already mentioned above
Clause 4.6.4.2(Specific Migration Container Barium)	-	0	Testing charge already mentioned above
Clause 4.6.4.2(Specific Migration Container Cobalt)	-	0	Testing charge already mentioned above
Clause 4.6.4.2(Specific Migration Container Copper)	-	0	Testing charge already mentioned above
Clause 4.6.4.2(Specific Migration Container Iron)	-	0	Testing charge already mentioned above
Clause 4.6.4.2(Specific Migration Container Lithium)	-	0	Testing charge already mentioned above
Clause 4.6.4.2(Specific Migration Container Manganese)	-	0	Testing charge already mentioned above
Clause 4.6.4.2(Specific Migration Container Zinc)	-	0	Testing charge already mentioned above
Clause 4.6.4.2(Specific Migration Container Phthalic acid, bis (2- ethylhexyl) ester (DEHP))	-	0	Testing charge already mentioned above
Clause 4.6.4.2(Specific Migration Closure Barium)	-	0	Testing charge already mentioned above
Clause 4.6.4.2(Specific Migration Closure Cobalt)	-	0	Testing charge already mentioned above
Clause 4.6.4.2(Specific Migration Closure Copper)	-	0	Testing charge already mentioned above
Clause 4.6.4.2(Specific Migration Closure Iron)	-	0	Testing charge already mentioned above
Clause 4.6.4.2(Specific Migration Closure Lithium)	-	0	Testing charge already mentioned above
Clause 4.6.4.2(Specific Migration Closure Manganese)	-	0	Testing charge already mentioned above
Clause 4.6.4.2(Specific Migration Closure Antimony)	-	0	Testing charge already mentioned above
Clause 4.6.4.2(Specific Migration Closure Phthalic acid, bis (2- ethylhexyl) ester (DEHP))	-	0	Testing charge already mentioned above
Clause 4.6.5(Water Potability Test (odour))	-	0	Testing charge already mentioned above
Clause 5.1(Marking)	-	0	Testing charge already mentioned above
Clause 4.6.1.2(Colour-Tint)	-	0	Testing charge already mentioned above
Clause 4.1.3(Materials for Primary Packaging-Wad)	-	0	Testing charge already mentioned above
Clause 4.1.2.2(Materials for Primary Packaging-Closure colourants)	-	0	Testing charge already mentioned above
Clause 4.1.2.3(Materials for Primary Packaging-Sleeves for the closure)	-	0	Testing charge already mentioned above
Clause 4.6.4.2(Specific Migration Closure Zinc)	-	0	Testing charge already mentioned above
Clause 4.1.1(Materials for Primary Packaging (Container))	-	0	Testing charge already mentioned above
Clause 4.1.2.1(Material for Closures (a) Closure materials (Aluminium))	-	0	Testing charge already mentioned above
Clause 4.1.2.1(Material for Closures (b) Plastic Materials)	-	0	Testing charge already mentioned above
Clause 4.1.2.1(Material for Closures (c) Combination of plastics and metal)	-	0	Testing charge already mentioned above
Clause 4.2(Design, Shape and Dimensions)	-	0	Testing charge already mentioned above
Clause 4.3("Manufacture, Workmanship, Finish and Appearance")	-	0	Testing charge already mentioned above
Clause 4.4(Capacity (Nominal))	-	0	Testing charge already mentioned above
Clause 4.4(Capacity (Brimfull))	-	0	Testing charge already mentioned above
Clause 4.5(Wall Thickness Top)	-	0	Testing charge already mentioned above
Clause 4.5(Wall Thickness Middle)	-	0	Testing charge already mentioned above
Clause 4.5(Wall Thickness Bottom)	-	0	Testing charge already mentioned above
Clause 4.6.1.1(Colour-Transparency)	-	0	Testing charge already mentioned above
Clause 4.6.2(Leakage Test (Closure Leakage) cls. 6.1 of IS 2798)	-	0	Testing charge already mentioned above
Clause 4.6.2(Leakage Test (Vibration Leakage) cls. 6.2 of IS 2798)	-	0	Testing charge already mentioned above
Clause 4.6.3.1(Drop Impact test)	-	0	Testing charge already mentioned above
Clause 4.6.3.2(Stack Load test)	-	0	Testing charge already mentioned above
Clause 4.6.4.1(Overall Migration Container)	-	0	Testing charge already mentioned above
Clause 4.6.4.1(Overall Migration Closure)	-	0	Testing charge already mentioned above
Clause 4.6.4.3(Colour migration Container)	-	0	Testing charge already mentioned above
Clause 4.6.4.3(Colour migration Closure)	-	0	Testing charge already mentioned above
Clause 4.6.5(Water Potability Test (Taste))	-	0	Testing charge already mentioned above
Clause 4.6.4.2(Specific Migration Container Antimony)	-	0	Testing charge already mentioned above
Clause 4.6.4.2(Specific Migration Container Barium)	-	0	Testing charge already mentioned above
Clause 4.6.4.2(Specific Migration Container Cobalt)	-	0	Testing charge already mentioned above
Clause 4.6.4.2(Specific Migration Container Copper)	-	0	Testing charge already mentioned above
Clause 4.6.4.2(Specific Migration Container Iron)	-	0	Testing charge already mentioned above
Clause 4.6.4.2(Specific Migration Container Lithium)	-	0	Testing charge already mentioned above
Clause 4.6.4.2(Specific Migration Container Manganese)	-	0	Testing charge already mentioned above
Clause 4.6.4.2(Specific Migration Container Zinc)	-	0	Testing charge already mentioned above
Clause 4.6.4.2(Specific Migration Container Phthalic acid, bis (2- ethylhexyl) ester (DEHP))	-	0	Testing charge already mentioned above
Clause 4.6.4.2(Specific Migration Closure Barium)	-	0	Testing charge already mentioned above
Clause 4.6.4.2(Specific Migration Closure Cobalt)	-	0	Testing charge already mentioned above
Clause 4.6.4.2(Specific Migration Closure Copper)	-	0	Testing charge already mentioned above
Clause 4.6.4.2(Specific Migration Closure Iron)	-	0	Testing charge already mentioned above
Clause 4.6.4.2(Specific Migration Closure Lithium)	-	0	Testing charge already mentioned above
Clause 4.6.4.2(Specific Migration Closure Manganese)	-	0	Testing charge already mentioned above
Clause 4.6.4.2(Specific Migration Closure Antimony)	-	0	Testing charge already mentioned above
Clause 4.6.4.2(Specific Migration Closure Phthalic acid, bis (2- ethylhexyl) ester (DEHP))	-	0	Testing charge already mentioned above
Clause 4.6.5(Water Potability Test (odour))	-	0	Testing charge already mentioned above
Clause 5.1(Marking)	-	0	Testing charge already mentioned above
Clause 4.6.1.2(Colour-Tint)	-	0	Testing charge already mentioned above
Clause 4.1.3(Materials for Primary Packaging-Wad)	-	0	Testing charge already mentioned above
Clause 4.1.2.2(Materials for Primary Packaging-Closure colourants)	-	0	Testing charge already mentioned above
Clause 4.1.2.3(Materials for Primary Packaging-Sleeves for the closure)	-	0	Testing charge already mentioned above
Clause 4.6.4.2(Specific Migration Closure Zinc)	-	0	Testing charge already mentioned above

07 Oct, 2028

-
Included w.e.f 21.08.2025

5022

Atckon Laboratories LLP, Bahadurgarh

8186436

IS 2185 : Part 3 (1984)

Concrete Masonry Units Part 3 Autoclaved Cellular Aerated Concrete Blocks

ALL

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8(Physical requirments)	-	1000	-
8.2(Physical requirments-Dimensions-Length)	-	1000	-
8.2(Physical requirments-Dimensions-Height)	-	1000	-
8.2(Physical requirments-Dimensions-Width)	-	1000	-
8.3(Physical requirments- Block density)	-	1000	-
8.4(Physical requirments- Compressive strength)	-	1000	-
8.5(Thermal Conductivity)	-	1000	-
8.6( Drying Shrinkage )	-	1000	-
8.4, 9.2 & 11.3(Indivisual Moisture Content)	-	1000	-
8.4, 9.2 & 11.3(Indivisual Bulk density)	-	1000	-
8.4, 9.2 & 11.3 & Table 1(Indivisual Compressive strength)	-	1000	-
8.3 & 9.1(Indivisual Moisture Content)	-	1000	-
8.3 & 9.1 Table 1(Indivisual Block Density)	-	1000	-
3.2 & 8.2(Indivisual Height)	-	1000	-
3.2 & 8.2(Indivisual Width)	-	1000	-
3.2 & 8.2(Indivisual Length)	-	1000	-
8.6, 9.4 & 11.5(Grade)	-	1000	-
3.4(Special Faces)	-	1000	-
3.3(Faces & Arises)	-	1000	-
3.1(Shape)	-	1000	-
8.1.1(General (Exposed wall construction))	-	1000	-
5(MATERIALS)	-	1000	-
7(SURFACE TEXTURE AND FINISH)	-	1000	-
9.3(Thermal Conductivity)	-	1000	-
15(Marking)	-	1000	-

-
Included w.e.f 22.07.2025

5023

Pump Testing Laboratory

9133933

IS 9283 (2013)

Motors for submersible pumpsets - Specification (Second Revision)

1000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.6(Balancing of Rotor, IS 9283)	-	500	nil
5.5(Finish of Bearings, IS 9283)	-	500	nil
8(Type of duty, IS 9283)	-	500	nil
13(Terminal Markings, IS 9283)	-	500	nil
15.1(Marking, IS 9283)	-	500	nil
19(Temperature rise test, IS 9283)	-	500	nil
20(High Voltage test, IS 9283)	-	500	nil
21(Insulation Resistance test, IS 9283)	-	500	nil
22(Speed, IS 9283)	-	500	nil
23(Leakage Current test, IS 9283)	-	500	nil
7.1(Dimensions of Motors, IS 9283)	-	500	NIL
18.1(Overload test, IS 9283)	-	500	NIL
19(Temperature rise test, IS 9283)	-	500	NIL

15 May, 2028

-
-

5024

Pump Testing Laboratory

9133933

IS 8034 (2018)

Submersible pumpsets - Specification (Third Revision)

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.7(Direction of Rotation)	-	500	nil
9.10 (b)(High Voltage test)	-	500	NIL
9.10 (a)(Insulation Resistance test)	-	500	NIL
9.10 (h)(Leakage current test)	-	500	NIL
9.10 (f) & (g)(Locked Rotor Test)	-	500	NIL
9.10 (d)(No Load Test at Rated Voltage)	-	500	NIL
10.3(Hydrostatic Pressure Test)	-	500	NIL
10(Pump Performance test)	-	1500	NIL
14(Marking)	-	500	NIL
8.5(Balancing of rotor)	-	500	NIL
9.10 (j)(Temperature Rise Test at Rated Voltage)	-	500	NIL
9.10 (k)(Temperature rise test at reduced voltage)	-	500	NIL
9.10 (c)(Measurement of Stator Resistance)	-	500	nil
10.2(Laboratory Tests Cl.8 of IS 11346-2002 Rate of flow and head Cl.8 of IS 11346-2002)	-	500	nil
11.1.1(Guarantee of Performance)	-	500	nil
11.1.2(Guarantee of Performance)	-	500	nil
11.1.3(Guarantee of Performance)	-	500	nil
11.1.4(Guarantee of Performance)	-	500	nil
11.1.5(Guarantee of Performance)	-	500	nil
8.5.1(Balancing)	-	500	NIL
8.1(General Requirements)	-	500	NIL

15 May, 2028

-
-

5025

ALAIPURIA TEST HOUSE PRIVATE LIMITED, GHAZIABAD

8180426

IS 3854 (2023)

Switches for Domestic and Similar Purposes - Specification (Third Revision)

UP TO AND INCLUDING 32A

19800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General Requirements)	-	20	-
Cl-5(General notes on tests)	-	20	-
Cl-6(Rating)	-	50	-
Cl-7(Classification)	-	50	-
Cl-8(Marking)	-	200	-
Cl-9(Checking of dimensions)	-	200	-
Cl-10.1, 10.2(Prevention of Access to Live Parts)	-	300	-
Cl-10.3(Requirements for Accessible Metal Parts)	-	150	-
Cl-10.4(Requirements for Insulation of the Mechanism)	-	250	-
Cl. 10.5(Requirements for Insulation of the Mechanism with Respect to the Surrounding Environment)	-	250	-
Cl-10.6(Requirements for Switches Operated Indirectly)	-	250	-
Cl-10.7(Requirements for Switches with Replaceable Pull Cord)	-	250	-
Cl-11(Provision for earthing)	-	300	-
Cl-12(Terminals)	-	200	-
Cl-13(Constructional requirements)	-	200	-
Cl-14(Mechanism)	-	250	-
Cl-15.1(Resistance to Ageing)	-	500	-
Cl-15.3(Resistance to Humidity)	-	1000	-
Cl-16.1(General)	-	200	-
Cl-16.2(Test for Measuring the Insulation Resistance)	-	150	-
Cl-16.3(Electric Strength Test)	-	1000	-
Cl-17(Temperature rise)	-	500	-
Cl-18(Making and breaking capacity)	-	2000	-
Cl-19(Normal operation)	-	2000	-
Cl-20(Mechanical strength)	-	200	-
Cl-21(Resistance to heat)	-	1000	-
Cl-22(Screws, current carrying parts and connections)	-	200	-
Cl-23(Creepage distances, clearances and distance through sealing compound)	-	250	-
Cl-24.1(Resistance to abnormal heat and fire)	-	250	-
Cl-24.2(Resistance to tracking)	-	250	-
Cl-25(Resistance to rusting)	-	250	-
19.1(Test for Switches Intended for Inductive Loads)	-	500	-
19.2(Test for Switches Intended for Externally Ballasted Lamp Loads)	-	500	-
19.3(Test for Switches Intended for Self-ballasted Lamp Loads)	-	3000	-
13.5(Attachment of knobs)	-	200	-
12.3.11(Table 11)(Test Current for the Verification of Electrical and Thermal Stresses in Normal Use of Screwless Terminals)	-	250	-
12.3.12(Table 13)(Deflection Test Forces)	-	230	-
Cl-4(General Requirements)	-	0	-
Cl-5(General notes on tests)	-	0	-
Cl-6(Rating)	-	0	-
Cl-7(Classification)	-	0	-
Cl-8(Marking)	-	0	-
Cl-9(Checking of dimensions)	-	0	-
Cl-10.1, 10.2(Prevention of Access to Live Parts)	-	0	-
Cl-10.3(Requirements for Accessible Metal Parts)	-	0	-
Cl-10.4(Requirements for Insulation of the Mechanism)	-	0	-
Cl. 10.5(Requirements for Insulation of the Mechanism with Respect to the Surrounding Environment)	-	0	-
Cl-10.6(Requirements for Switches Operated Indirectly)	-	0	-
Cl-10.7(Requirements for Switches with Replaceable Pull Cord)	-	0	-
Cl-11(Provision for earthing)	-	0	-
Cl-12(Terminals)	-	0	-
Cl-13(Constructional requirements)	-	0	-
Cl-14(Mechanism)	-	0	-
Cl-15.1(Resistance to Ageing)	-	0	-
Cl-15.3(Resistance to Humidity)	-	0	-
Cl-16.1(General)	-	0	-
Cl-16.2(Test for Measuring the Insulation Resistance)	-	0	-
Cl-16.3(Electric Strength Test)	-	0	-
Cl-17(Temperature rise)	-	0	-
Cl-18(Making and breaking capacity)	-	0	-
Cl-19(Normal operation)	-	0	-
Cl-20(Mechanical strength)	-	0	-
Cl-21(Resistance to heat)	-	0	-
Cl-22(Screws, current carrying parts and connections)	-	0	-
Cl-23(Creepage distances, clearances and distance through sealing compound)	-	0	-
Cl-24.1(Resistance to abnormal heat and fire)	-	0	-
Cl-24.2(Resistance to tracking)	-	0	-
Cl-25(Resistance to rusting)	-	0	-
19.1(Test for Switches Intended for Inductive Loads)	-	0	-
19.2(Test for Switches Intended for Externally Ballasted Lamp Loads)	-	0	-
19.3(Test for Switches Intended for Self-ballasted Lamp Loads)	-	0	-
12.3.11(Table 11)(Test Current for the Verification of Electrical and Thermal Stresses in Normal Use of Screwless Terminals)	-	0	-
12.3.12(Table 13)(Deflection Test Forces)	-	0	-
13.5(Attachment of knobs)	-	0	-

03 Oct, 2027

-
Included w.e.f 10.10.2025 Exclusion: Cl-15.2 (Protection Provided by Enclosures of Switches)

5026

Atckon Laboratories LLP, Bahadurgarh

8186436

IS 2185 : Part 2 (1983)

Specification for concrete masonry units: Part 2 hollow and solid lightweight concrete blocks (First Revision)

ALL

17500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.7(Moisture Movement)	-	1000	-
8.6(Drying shrinkage)	-	1000	-
8.5, Table 1(Water Absorption)	-	1000	-
8.4, Table 1(Compressive strength)	-	1000	-
8.3(Block Density)	-	1000	-
3.2.5(Thickness of Web)	-	1000	-
3.2.5(Face Shell Thickness)	-	1000	-
3.2(Width)	-	1000	-
3.2(Height)	-	1000	-
3.2(Length)	-	1000	-
8.1(General)	-	1000	-
8.2(Deimension (Length))	-	1000	-
8.2(Deimension (Height))	-	1000	-
8.2(Deimension (Width))	-	1000	-
8.3(Block Density)	-	1000	-
8.4(Compressive Strength)	-	500	-
8.5(Water Absorption)	-	500	-
8.6(Drying Shrinkage)	-	500	-
8.7(Moisture Movement)	-	500	-

-
Included w.e.f 22.07.2025

5027

AADIDEV TEST & RESEARCH CENTRE LLP

8194926

IS 398 : Part 2 (1996)

Aluminium conductors for overhead transmission purposes - Specification: Part 2 aluminium conuuctors, galvanized steel - Reinforced (Third Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1.1 & 13.2 Table-1 (mech)(Diameter of Aluminium Wires Before Stranding)	-	500	-
8.1.1 & 13.2 Table 2 (mech)(Diameter of Steel Wires Before Stranding)	-	500	-
8.1.1 & 13.2 Table-1 (mech)(Diameter of Aluminium Wires After Stranding)	-	500	-
8.1.1 & 13.2 Table 2 (mech)(Diameter of Steel Wires After Stranding)	-	500	-
10 (elec)(Stranding)	-	0	-
10 (elec)(Stranding)	-	0	-
10 (elec)(Stranding)	-	0	-
10 (mech)(Stranding)	-	0	-
13.3 Table 1 (mech)(Breaking Load of Aluminium Wires Before Stranding)	-	1000	-
13.3 Table 2 (mech)(Breaking Load of Steel Wires Before Stranding)	-	1000	-
13.3 Table 1 (mech)(Breaking Load of Aluminium Wires After Stranding)	-	1000	-
13.3 Table 2 (mech)(Breaking Load of Steel Wires After Stranding)	-	1000	-
13.4.1 (mech)(Ductility by Torsion Test before stranding)	-	500	-
13.4.1 (mech)(Ductility by Torsion Test before stranding)	-	500	-
13.4.1 (mech)(Ductility by Torsion Test after stranding)	-	500	-
13.4.1 (mech)(Ductility by Torsion Test after stranding)	-	500	-
13.4.2 (elec)(Ductility by Elongation Test before stranding)	-	500	-
13.4.2 (elec)(Ductility by Elongation Test after stranding)	-	500	-
13.5.1 (mech)(Wrapping Test Aluminium Wires Before Stranding)	-	200	-
13.5.1 (mech)(Wrapping Test Aluminium Wires After Stranding)	-	200	-
13.5.2 (mech)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	500	-
13.5.2 (mech)(Wrapping Test Galvanized Steel Wires After Stranding)	-	500	-
13.6 (elec)(Resistance test-Aluminium wire before Stranding)	-	500	-
13.6 (elec)(Resistance test-Aluminium wire after stranding)	-	500	-
13.7.2 (chem)(Mass of Zinc coating)	-	1000	-
13.7.2 (chem)(Uniformity of Zinc coating)	-	1000	-
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Outermost Layer)	-	500	-
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	500	-
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	500	-
13.8 Table-4 (mech)(Lay Ratio- Steel Core (6 Wire Layer))	-	500	-
13.8 Table-4 (elec)(Lay Ratio- Steel Core (6 Wire Layer))	-	500	-
13.8 Table-4 (elec)(Lay Ratio- Steel Core (6 Wire Layer))	-	500	-
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	500	-
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	500	-
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Outermost Layer)	-	500	-
13.7.2 (elec)(Uniformity of Zinc coating)	-	1000	-
13.7.2 (elec)(Mass of Zinc coating)	-	1000	-
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires After Stranding)	-	1000	-
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	1000	-
13.5.1 (elec)(Wrapping Test Aluminium Wires After Stranding)	-	500	-
13.5.1 (elec)(Wrapping Test Aluminium Wires Before Stranding)	-	500	-
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	500	-
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	500	-
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	500	-
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	500	-
13.3 Table 2 (elec)(Breaking Load of Steel Wires After Stranding)	-	500	-
13.3 Table 1 (elec)(Breaking Load of Steel Wires After Stranding)	-	500	-
13.3 Table 2 (elec)(Breaking Load of Steel Wires Before Stranding)	-	500	-
13.3 Table 1 (elec)(Breaking Load of Steel Wires Before Stranding)	-	500	-
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires Before Stranding)	-	500	-
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires Before Stranding)	-	500	-
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires After Stranding)	-	500	-
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires After Stranding)	-	500	-
13.8 Table-4 (elec)(Lay Ratio- Steel Core (6 Wire Layer))	-	500	-
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	500	-
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	500	-
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Outermost Layer)	-	500	-
13.7.2 (elec)(Uniformity of Zinc coating)	-	1000	-
13.7.2 (elec)(Mass of Zinc coating)	-	1000	-
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires After Stranding)	-	1000	-
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	1000	-
13.5.1 (elec)(Wrapping Test Aluminium Wires After Stranding)	-	500	-
13.5.1 (elec)(Wrapping Test Aluminium Wires Before Stranding)	-	500	-
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	500	-
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	500	-
13.4.1 (elec)(Ductility by Torsion Test before stranding)	-	500	-
13.4.1 (elec)(Ductility by Torsion Test before stranding)	-	500	-
13.3 Table 2 (elec)(Breaking Load of Steel Wires After Stranding)	-	500	-
13.3 Table 1 (elec)(Breaking Load of Aluminium Wires After Stranding)	-	500	-
13.3 Table 2 (elec)(Breaking Load of Steel Wires Before Stranding)	-	500	-
13.3 Table 1 (elec)(Breaking Load of Aluminium Wires Before Stranding)	-	500	-
10 (elec)(Stranding)	-	0	-
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires After Stranding)	-	500	-
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires After Stranding)	-	500	-
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires Before Stranding)	-	500	-
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires Before Stranding)	-	200	-
4.1(Resistivity)	-	500	-
4.2(Density)	-	500	-
5.1(Density)	-	500	-
14.2(a), 8.2.1(Sizes)	-	0	-
7(FREEDOM FROM DEFECTS)	-	500	-
9(Joint in wires)	-	0	-
6.1.2(The mechanical properties of wire shall comply with the requirements given in Table 2)	-	1000	-
8.2.2(Calculated resistance)	-	1000	-
Cl-9.2.5(Welded joint strength)	-	500	-
8.1.1 & 13.2 Table-1(Diameter of Aluminium Wires Before Stranding)	-	500	-
8.1.1 & 13.2 Table 2(Diameter of Steel Wires Before Stranding)	-	500	-
8.1.1 & 13.2 Table-1(Diameter of Aluminium Wires After Stranding)	-	500	-
8.1.1 & 13.2 Table 2(Diameter of Steel Wires After Stranding)	-	500	-
10(Stranding)	-	0	-
13.3 Table 1(Breaking Load of Aluminium Wires Before Stranding)	-	500	-
13.3 Table 2(Breaking Load of Steel Wires Before Stranding)	-	500	-
13.3 Table 1(Breaking Load of Aluminium Wires After Stranding)	-	500	-
13.3 Table 2(Breaking Load of Steel Wires After Stranding)	-	500	-
13.4.1(Ductility by Torsion Test before stranding)	-	500	-
13.4.1(Ductility by Torsion Test before stranding)	-	500	-
13.4.1(Ductility by Torsion Test after stranding)	-	500	-
13.4.1(Ductility by Torsion Test after stranding)	-	500	-
13.5.1(Wrapping Test Aluminium Wires Before Stranding)	-	500	-
13.5.1(Wrapping Test Aluminium Wires After Stranding)	-	500	-
13.5.2(Wrapping Test Galvanized Steel Wires Before Stranding)	-	1000	-
13.5.2(Wrapping Test Galvanized Steel Wires After Stranding)	-	1000	-
13.8 Table-4(Lay Ratio- Aluminium Wire Outermost Layer)	-	500	-
13.8 Table-4(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	500	-
13.8 Table-4(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	500	-
13.8 Table-4(Lay Ratio- Steel Core (6 Wire Layer))	-	500	-
13.7(Galvanising test Dip test for uniformity of coating)	-	1000	-
13.7(Galvanising test Dip test for uniformity of coating)	-	1000	-
13.7(Weight of Zinc Coating [g/m²])	-	1000	-
13.7(Weight of Zinc Coating [g/m²])	-	1000	-
7.1(Freedom from Defects)	-	500	-
9(Joint in Wire)	-	0	-
4.3(Constant-Mass Temperature Coefficient of Resistance)	-	0	-
4.4(Coefficient of Linear Expansion)	-	0	-
5.2(Coefficient of Linear Expansion)	-	0	-
6.1.1(Aluminum wires shall conform to IS 5484)	-	0	-
6.2(It shall conform to and satisfy all the requirements of IS 209)	-	0	-
6.2(zinc Purity)	-	0	-

29 Dec, 2028

-
13.9 (elec) (Surface condition test), 13.10 (elec) (Ultimate breaking load), 13.11 (elec) (Stress-strain test)

5028

AADIDEV TEST & RESEARCH CENTRE LLP

8194926

IS 14255 (1995)

Aertal bunched cables - For working voltages up to and including 1100 Volts - Specification

22000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Phase/Street Lighting conductor)	-	0	-
4.2(Messenger (Neutral Conductor or Otherwise))	-	0	-
5.1(Insulation)	-	0	-
6.1(Flexibility class)	-	0	-
6.2(Compactness)	-	0	-
6.2(No of strands)	-	500	-
6.2(Surface)	-	500	-
6.3(Protective barrier)	-	500	-
6.4(size of street lighting conductor)	-	500	-
6.5(Size of messenger conductor )	-	500	-
6.6(Joints in messenger conductor )	-	500	-
6.6(Direction of outer layer)	-	500	-
7.1(Insulation)	-	0	-
7.2( Thickness of insulation)	-	500	-
7.3(Tolerance on thickness of insulation )	-	500	-
7.4(Aplication of the insulation )	-	0	-
7.5(Colour of the insulation )	-	0	-
8.1(Core identification)	-	0	-
8.2(Core identification)	-	500	-
8.3(Identification by other means)	-	0	-
9.1(Assembly (Laying up))	-	500	-
9.2(Assembly (Laying up))	-	500	-
9.3(Direction of lay)	-	500	-
10.1 a) i)(Tests on phase/street light conductor: tensile test - Test method IS10810:Part 2)	-	0	-
10.1 a) ii)(Wrapping test - 10810: Part 3)	-	500	-
10.1 a) iii)(Resistance test - IS10810: Part 5)	-	1000	-
10.1 b) i)(Test on messenger conductor: Breaking load - IS 10810: Part 2)	-	1000	-
10.1 b) ii)(Test on messenger conductor: Elongation test - Cl 11.3)	-	500	-
10.1 b) iii)(Test on messenger conductor: Resistance test - IS 10810: Part 5)	-	1000	-
10.1 c) i)(Physical tests for XLPE Insulation: Tensile strength - IS 10810: Part 7)	-	500	-
10.1 c) i)(Physical tests for XLPE Insulation: elongation at break - IS 10810: part 7)	-	500	-
10.1 c) ii)(Ageing in air oven : Tensile strength variation - IS 10810:Part 11)	-	500	-
10.1 c) ii)(Ageing in air oven : Elongation variation- IS 10810: Part 11)	-	500	-
10.1 c) iii)(Hot set test: Elongation under load - IS 10810: Part 30)	-	1000	-
10.1 c) iii)(Hot set test: Permanent elongation (set) after cooling - IS 10810: Part 30)	-	1000	-
10.1 c) iv)(Shrinkage test : Shrinkage - 10810:Part 12)	-	500	-
10.1 c) iv)(Shrinkage test : Crack Observed - 10810:Part 12)	-	500	-
10.1 c) v)(Water ahsorption (Gravimetric) - IS 10810: Part 33 )	-	5000	-
10.1 d) i)(Physical test for PE insulation: Tensile strength - IS 10810: Part 7 )	-	500	-
10.1 d) i)(Physical test for PE insulation: elongation at break - IS 10810: Part 7)	-	500	-
10.1 f)(Insulation resistance (Volume resistivity) test a) volume resistivity at 27°C - IS 10810: Part 43)	-	1000	-
10.1 f)(Insulation resistance (Volume resistivity) test b) volume resistivity at 70°C - IS 10810: Part 43)	-	1000	-
10.1 g)(High voltage test - IS10810:Part 45)	-	1500	-
11.4(Bending Test on the Completed Cable ( Optional) )	-	500	-
11.4(Bending Test on the Completed Cable ( Optional))	-	500	-
10.1 d) iii)(Carbon Black Content)	-	1500	-
6.1(Construction of phase conductor)	-	0	-
6.1(Number of wires (phase conductor))	-	500	-
6.1(Construction of Street Lighting conductor)	-	0	-
6.1(Number of wires (Street Lighting conductor))	-	500	-
12.1(Manufacturer's Identification)	-	0	-
12.2(Cable Identification)	-	0	-
10.1 d) ii)(Melt flow index- IS 10810: Part 23)	-	1500	-
10.1 d) iv)(Vicat softening point -IS 10810: Part 22)	-	1500	-
10.1 d) v)(Environmental stress cracking -IS 10810:Part29)	-	1500	-

29 Dec, 2028

-
-

5029

AADIDEV TEST & RESEARCH CENTRE LLP

8194926

IS 398 : Part 4 (1994)

Aluminium conductors for overhead transmission purposes: Part 4 aluminium alloy stranded conductors (Aluminium - Magnesium - Silicon Type) - Specification (Third Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Freedom from Defects)	-	500	-
7.1 Table-1(Dimensional measurement of wires)	-	1000	-
7.2.2 Table-2, Table-4(Calculated resistance of Stranded Conductor)	-	1500	-
8.1(Joints in wires-Conductors Containing Seven Wires)	-	500	-
8.2(Joints in wires-Conductors Containing More Than Seven Wires)	-	500	-
9.1(Stranding)	-	500	-
9.2 Table 3(Lay Ratio of stranded conductors)	-	1000	-
9.3(Direction of Lay)	-	500	-
9.4(Multiple layers of wires)	-	500	-
11(Packing and Marking)	-	0	-
12.2 Table 1(Breaking Load Test- Before Stranding)	-	1500	-
12.2 Table 1(Breaking Load Test- After Stranding)	-	1500	-
12.3 Table 1(Elongation Test- Before Stranding)	-	1000	-
12.3 Table 1(Elongation Test- After Stranding)	-	1000	-
12.4 Table 1(Resistance of Aluminium wire)	-	1000	-
9.2(Lay Ratio 24 wire layer)	-	1000	-
9.2(Lay Ratio 18 wire layer)	-	1000	-
9.2(Lay Ratio 12 wire layer)	-	1000	-
9.2(Lay Ratio 3/6 wire layer)	-	1000	-
7.2.1(Sizes)	-	0	-
Cl-7.2 (7.2.1, 7.2.2), Table-2(Stranding and Wire Dia)	-	500	-
Cl- 7.2 (7.2.1, 7.2.2), Table-2(Approx Overall Dia)	-	500	-
Cl. 7.2 (7.2.1, 7.2.2), Table 2(Approx Mass)	-	500	-
Cl- 7.2 (7.2.1, 7.2.2), Table-2(Calculated Maximum Resistance at 20°C)	-	2000	-
Cl- 7.2 (7.2.1, 7.2.2), Table-2(Approx Calculated Breaking Load)	-	2000	-

29 Dec, 2028

-
-

5030

AADIDEV TEST & RESEARCH CENTRE LLP

8194926

IS 398 : Part 1 (1996)

Aluminium conductors for overhead transmission purposes - Specification: Part 1 aluminium stranded conductors (Third Revision)

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12.2, Table-1(Measurement of diameter of individual aluminium wire)	-	800	-
12.3, Table-1(Breaking load before stranding)	-	1500	-
12.3, Table-1(Breaking load after stranding)	-	1500	-
12.4(Wrapping test)	-	500	-
12.5, Table 1(Resistance test)	-	1500	-
12.6, Table 3(Measurement of lay ratio)	-	500	-
9.3(Stranding)	-	500	-
6(Freedom from defects)	-	800	-
7.2.1(Sizes)	-	500	-
8, 8.1, 8.2(Joint in wires, except during stranding)	-	500	-
9.2(Lay ratio)	-	1000	-
9.4(Multiple layer of wires)	-	500	-
4.1(Resistivity)	-	1000	-
4.2(Density)	-	0	-
4.3(Constant-Mass Temperature Coefficient of Resistance)	-	0	-
4.4(Coefficient of Linear Expansion)	-	0	-
5(Material)	-	0	-
7.1.1(Nominal Sizes)	-	800	-
7.2.2(Resistance)	-	1000	-

29 Dec, 2028

-
-

5031

Central institute of Petrochemicals Engineering & Technology (CIPET), Raipur

5163604

IS 13487 (2024)

Irrigation Equipment — Emitters — Specification

Uniformity Category -A , Uniformity Category -B

4575.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Connections)	-	500.00	For BIS 4575/- and for Other 6100/- GST Extra
Cl-5.2(Emitter Ends)	-	500.00	GST Extra
Cl-5.3(Materials)	-	2425.00	(Optional ) Material Test and GST Extra
Cl-6.1(Test Specimens)	-	500.00	GST Extra
Cl-6.2.1(polyethylene pipe)	-	0.00	Already added clause no 6.1
Cl-6.2.2("grease or chemicals ")	-	0.00	Already added clause no 6.1
Cl-6.2.3(water temperature)	-	0.00	Already added clause no 6.1
Cl-6.3(Accuracy or Measuring Devices)	-	0.00	-
Cl-7.1(Construction and Workmanship)	-	500.00	GST EXTRA
Cl-7.2(Flow Paths in Emitter)	-	500.00	GST EXTRA
Cl-7.3(Resistance to Hydrostatic Pressure)	-	1000.00	GST EXTRA
Cl-7.4(Emitter Pull-Out)	-	500.00	GST EXTRA
Cl-7.4.1(In-Line Emitters)	-	0.00	GST EXTRA
Cl-7.4.2(On-Line Emitters)	-	0.00	GST EXTRA
Cl-8.1.1(Uniformity of Emission Rate)	-	1000.00	GST EXTRA
Cl-8.1.2(Emission Rate as Function of Inlet Pressure)	-	1000.00	GST EXTRA
Cl-8.1.3(Determination of Emitter Exponent)	-	600.00	GST EXTRA
Cl-9(Marking)	-	0.00	-

25 Apr, 2028

-
Included w.e.f.22.07.2025

5032

Samridhi Test House Pvt. Ltd.

8184706

IS 15225 (2002)

Chlorinated polyvinyl chloride compounds used for pipes and fittings - Specifications

14500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Designation)	-	500	-
4.2.1(Data block 1)	-	500	-
4.2.2(Data block 2)	-	500	-
4.2.3, Table1(Data block 3)	-	500	-
4.2.4, table 2(Data block 4)	-	500	-
4.2.5, table 3(Data block 5)	-	500	-
4.2.6(Data block 6)	-	500	-
8.1.1(Resin k-value)	-	1000	-
8.1.2(Resin chlorine content)	-	4000	-
8.1.3(Form)	-	200	-
8.1.4(Compound chlorine content)	-	4000	-
8.1.5(Appearance)	-	200	-
8.2.1(Vicat softening temperature)	-	1700	-
8.2.2(Charpy impact strength)	-	1700	-
8.2.3(Tensile strength)	-	1700	-
8.2.4(Tensile modulus)	-	1700	-
8.3(Ash content)	-	900	-
4(Designation)	-	0	-
4.2.1(Data block 1)	-	0	-
4.2.2(Data block 2)	-	0	-
4.2.3, Table1(Data block 3)	-	0	-
4.2.4, table 2(Data block 4)	-	0	-
4.2.5, table 3(Data block 5)	-	0	-
4.2.6(Data block 6)	-	0	-
8.1.1(Resin k-value)	-	0	-
8.1.2(Resin chlorine content)	-	0	-
8.1.3(Form)	-	0	-
8.1.4(Compound chlorine content)	-	0	-
8.1.5(Appearance)	-	0	-
8.2.1(Vicat softening temperature)	-	0	-
8.2.2(Charpy impact strength)	-	0	-
8.2.3(Tensile strength)	-	0	-
8.2.4(Tensile modulus)	-	0	-
8.3(Ash content)	-	0	-
4(Designation)	-	0	-
4.2.1(Data block 1)	-	0	-
4.2.2(Data block 2)	-	0	-
4.2.3, Table1(Data block 3)	-	0	-
4.2.4, table 2(Data block 4)	-	0	-
4.2.5, table 3(Data block 5)	-	0	-
4.2.6(Data block 6)	-	0	-
8.1.1(Resin k-value)	-	0	-
8.1.2(Resin chlorine content)	-	0	-
8.1.3(Form)	-	0	-
8.1.4(Compound chlorine content)	-	0	-
8.1.5(Appearance)	-	0	-
8.2.1(Vicat softening temperature)	-	0	-
8.2.2(Charpy impact strength)	-	0	-
8.2.3(Tensile strength)	-	0	-
8.2.4(Tensile modulus)	-	0	-
8.3(Ash content)	-	0	-

-
Included w.e.f. 14.08.2025

5033

Vimta Labs Limited (6132436), Hyderabad

6132436

IS 17566 (2021)

Key locks for security Equipment-Specification

200000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
CLAUSE NO-5(CONSTRUCTION)	-	15000	-
"CLAUSE NO-6 TABLE NO -1 (i)"(Body of lock, Bolts, Stump)	-	15000	-
"CLAUSE NO-6 TABLE NO -1 (ii)"(Lock lever)	-	15000	-
"CLAUSE NO-6 TABLE NO -1 (iii)"(Lever springs)	-	15000	-
"CLAUSE NO-6 TABLE NO -1(iv)"(Keys)	-	15000	-
CLAUSE NO -8.1(Endurance Test)	-	100000	-
CLAUSE NO -8.2(Bolt forcing test)	-	20000	-
CLAUSE NO -8.3(Salt Spray Corrosion Test)	-	30000	-
CLAUSE NO -8.4(Key Strength Test)	-	10000	-
CLAUSE NO -9(Marking)	-	5000	-
CLAUSE NO-5(CONSTRUCTION)	-	15000	-
"CLAUSE NO-6 TABLE NO -1 (i)"(Body of lock, Bolts, Stump)	-	15000	-
"CLAUSE NO-6 TABLE NO -1 (ii)"(Lock lever)	-	15000	-
"CLAUSE NO-6 TABLE NO -1 (iii)"(Lever springs)	-	15000	-
"CLAUSE NO-6 TABLE NO -1(iv)"(Keys)	-	15000	-
CLAUSE NO -8.1(Endurance Test)	-	100000	-
CLAUSE NO -8.2(Bolt forcing test)	-	20000	-
CLAUSE NO -8.3(Salt Spray Corrosion Test)	-	30000	-
CLAUSE NO -8.4(Key Strength Test)	-	20000	-
CLAUSE NO -9(Marking)	-	5000	-
CLAUSE NO-5(CONSTRUCTION)	-	15000	-
"CLAUSE NO-6 TABLE NO -1 (i)"(Body of lock, Bolts, Stump)	-	15000	-
"CLAUSE NO-6 TABLE NO -1 (ii)"(Lock lever)	-	15000	-
"CLAUSE NO-6 TABLE NO -1 (iii)"(Lever springs)	-	15000	-
"CLAUSE NO-6 TABLE NO -1(iv)"(Keys)	-	15000	-
CLAUSE NO -8.1(Endurance Test)	-	100000	-
CLAUSE NO -8.2(Bolt forcing test)	-	20000	-
CLAUSE NO -8.3(Salt Spray Corrosion Test)	-	30000	-
CLAUSE NO -8.4(Key Strength Test)	-	20000	-
CLAUSE NO -9(Marking)	-	5000	-
CLAUSE NO-5(CONSTRUCTION)	-	15000	-
"CLAUSE NO-6 TABLE NO -1 (i)"(Body of lock, Bolts, Stump)	-	15000	-
"CLAUSE NO-6 TABLE NO -1 (ii)"(Lock lever)	-	15000	-
"CLAUSE NO-6 TABLE NO -1 (iii)"(Lever springs)	-	15000	-
"CLAUSE NO-6 TABLE NO -1(iv)"(Keys)	-	15000	-
CLAUSE NO -8.1(Endurance Test)	-	100000	-
CLAUSE NO -8.2(Bolt forcing test)	-	20000	-
CLAUSE NO -8.3(Salt Spray Corrosion Test)	-	30000	-
CLAUSE NO -8.4(Key Strength Test)	-	10000	-
CLAUSE NO -9(Marking)	-	5000	-
CLAUSE NO-5(CONSTRUCTION)	-	15000	-
"CLAUSE NO-6 TABLE NO -1 (i)"(Body of lock, Bolts, Stump)	-	15000	-
"CLAUSE NO-6 TABLE NO -1 (ii)"(Lock lever)	-	15000	-
"CLAUSE NO-6 TABLE NO -1 (iii)"(Lever springs)	-	10000	-
"CLAUSE NO-6 TABLE NO -1(iv)"(Keys)	-	10000	-
CLAUSE NO -8.1(Endurance Test)	-	100000	-
CLAUSE NO -8.2(Bolt forcing test)	-	10000	-
CLAUSE NO -8.3(Salt Spray Corrosion Test)	-	30000	-
CLAUSE NO -8.4(Key Strength Test)	-	15000	-
CLAUSE NO -9(Marking)	-	5000	-

25 Oct, 2027

-
Included w.e.f 04.11.2025

5034

BIS, Bengaluru Branch Laboratory (BNBL)

None

IS 330 (2023)

CHROMIUM TRIOXIDE - SPECIFICATION Third Revision

4430 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-4.1 (Description)	-
Cl-4.2 (Solubility)	-
Cl-4.3, 4.4 Table-1 (i) (Chromium trioxide (as CrO3), percent by mass, Min)	-
Cl-4.3, 4.4 Table-1 (ii) (Matter insoluble in water, percent by mass, Max)	-
Cl-4.3, 4.4 Table-1 (iii) (Sulphates (as SO4), percent by mass, Max)	-
Cl-4.3, 4.4 Table-1 (iv) (Alkali salts (as Na2O), percent by mass, Max)	-
Cl-4.3, 4.4 Table-1 (v) (Chlorides (as Cl), percent by mass, Max)	-
Cl-4.3, 4.4 Table-1 (vi) (Nitrates (as NO2), percent by mass, Max)	-
Cl-4.4, Table-2 (ii) (Iron (as Fe), percent by mass, Max)	-

-
Complete test facility is available for Electroplating grade. For Analytical reagent grade, test facility is not available for nitrates and Aluminium iron and trivalent chromium. As well as for Electronic industry grade, test facility is not available for Potassium and Sodium

5035

Advance Firetec and Research Lab Pvt. Ltd

8176606

IS 903 (2025)

Fire Hose Delivery Couplings, Branch Pipe, Nozzles and Nozzle Spanner - Specification (Fifth Revision)

FIRE HOSE DELIVERY COUPLINGS, BRANCH PIPE, NOZZLES AND NOZZLE SPANNER

43400.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
As per Clause 5.2, 6.2, 7.2, 10.2(Dimensions & Tolerances)	-	18000.00	Separately for Cl. No. 5.2 as per Fig. 2A & 2B - 6000.00 / For Cl. No. 6.2 as per Fig. 3 - 4000.00 / For Cl. No. 7.2 as per Fig. 4 - 4000.00 / For Cl. No. 10.2 as per Fig. 5 - 4000.00.
As per Clause 9.1(Hydraulic test)	-	18000.00	Separately for Delivery Coupling (Cl. No. 5.4) - 6000.00 / For Branch Pipe (Cl. No. 6.4) - 6000.00 / and For Nozzles (Cl. No. 7.4) - 6000.00.
As per Clause 10.4(Deflection test requirement)	-	4000.00	-
Cl. 10.4(Deflection test requirement)	-	0.0	Repeated One.
Cl. 4(WORKMANSHIP AND FINISH)	-	2000.00	Separately for Delivery Coupling - 500.00 / For Branch Pipe - 500.00 / For Nozzles - 500.00 / and For Nozzle Spanner - 500.00.
Cl. 5("INSTANTANEOUS DELIVERY HOSE COUPLINGS")	-	0.0	-
Cl. 5.1(Design)	-	200	As per Fig. 1.
Cl. 5.4(Testing)	-	0.0	Repeated One.
Cl. 6(BRANCH PIPE)	-	0.0	-
Cl. 6.4(Testing)	-	0.0	Repeated One.
Cl. 7(NOZZLES)	-	0.0	-
Cl. 7.4(Testing)	-	0.0	Repeated One.
Cl. 9.1(PERFORMANCE TEST)	-	0.0	Repeated One.
Cl. 9.1(Hydraulic Test)	-	0.0	Repeated One.
Cl. 10(NOZZLE SPANNER)	-	0.0	-
Cl. 11(MARKING)	-	800.00	Separately for Delivery Coupling - 200.00 / For Branch Pipe - 200.00 / For Nozzles - 200.00 / and For Nozzle Spanner - 200.00.
Cl-4(Workmanship and Finish)	-	0.0	Repeated One.
Cl-5.4(DELIVERY HOSE COUPLINGS- Hydraulic test)	-	0.0	Repeated One.
Cl-6.1(BRANCH PIPE -Design)	-	200	As per Fig. 3 .
Cl-6.4(BRANCH PIPE -Hydraulic test)	-	0.0	Repeated One.
Cl-7.1(NOZZLES -Design)	-	200.00	As per Fig. 4.
Cl-7.4(NOZZLES -Hydraulic test)	-	0.0	Repeated One.
Cl-10.3(NOZZLE SPANNER - Anti-corrosive treatment)	-	0.0	-

03 Mar, 2030

-
Included w.e.f.22.07.2025 Exclusion Cl. 5.3 (Materials) Cl. 6.3 (Materials) Cl. 7.3 (Materials) Cl. 8 (Materials) Cl-10.1 (NOZZLE SPANNER - Material)

5036

Atckon Laboratories LLP, Bahadurgarh

8186436

IS 2185 : Part 1 (2005)

Concrete masonry units - Specification: Part 1 hollow and solid concrete blocks (Third Revision)

ALL

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.1(PHYSICAL REQUIREMENTS-General)	-	1000	-
9.2 & 4.2(PHYSICAL REQUIREMENTS-Nominal Dimensions 1.Length 2.Hight 3. Width)	-	1000	-
9.2 & 4.2.3(Nominal Dimensions-variation in the length of units )	-	1000	-
9.2 & 4.2.3(Nominal Dimensions -variation in height and width of units )	-	1000	-
9.2 & 4.2.4, Table-1(Nominal Dimensions-thickness of the face shell)	-	2000	-
9.2 & 4.2.4, Table-1(Nominal Dimensions-thickness of the Web shell)	-	2000	-
9.3 & 5.1 & 5.2 Table 2(PHYSICAL REQUIREMENTS-Blocks Density - 1.Hollow (Open and Closed Cavity) Concrete Block- Grade Aor Grade B 2.Solid Concrete Block — Grade C)	-	2000	-
9.4- Table 2(PHYSICAL REQUIREMENTS - Compressive Strength 1.Minimum Average Compressive Strength of Units 2.Minimum Average Compressive Strength of Individual Unit)	-	2000	-
9.5(PHYSICAL REQUIREMENTS -Water Absorption)	-	1000	-
9.6(PHYSICAL REQUIREMENTS -Drying Shrinkage)	-	1000	-
9.7(PHYSICAL REQUIREMENTS -Moisture Movement)	-	1000	-
15(Marking)	-	0	-

-
Included w.e.f 22.07.2025

5037

ATCC TEST LABS LLP

8172626

IS 14927 : Part 2 (2001)

Cable Trunking and Ducting Systems for Electrical Installations : Part 2 Cable Trunking and Ducting Systems Intended for Mounting on Walls or Ceiling

22000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1(Marking (as per Cl 7.1 of IS:14927(Pt-I ):2001))	-	500	-
7.1(Marking (as per Cl 7.1 of IS:14927(Pt-I ):2001))	-	0	-
7.1(Marking (as per Cl 7.1 of IS:14927(Pt-I ):2001))	-	0	-
7.1(Marking (as per Cl 7.1 of IS:14927(Pt-I ):2001))	-	0	-
7.1(Marking (as per Cl 7.1 of IS:14927(Pt-I ):2001))	-	0	-
7.2(Marking (as per Cl 7.2 of IS:14927(Pt-I ):2001))	-	0	-
8.1( Dimensions (As per cl.8.1 of IS 14927(Pt-1) : 2001))	-	500	-
8.2(Dimensions (As per cl.8.2 of IS 14927(Pt-1) : 2001)	-	0	-
8.3, table 2( Dimensions (As per cl.8.3 and Table-2 of IS 14927(Pt-1) : 2001))	-	0	-
8.3, table 2( Dimensions (As per cl.8.3 and Table-2 of IS 14927(Pt-1) : 2001))	-	0	-
8.3, table 2( Dimensions (As per cl.8.3 and Table-2 of IS 14927(Pt-1) : 2001))	-	0	-
9.1(Construction ( As per Cl. 9.1 of IS 14927(Pt-1):2001))	-	500	-
9.1(Construction)	-	0	-
9.2(Construction ( As per Cl. 9.2 of IS 14927(Pt-1):2001))	-	0	-
9.2(Construction ( As per Cl. 9.2 of IS 14927(Pt-1):2001))	-	0	-
9.2(Construction ( As per Cl. 9.2 of IS 14927(Pt-1):2001))	-	0	-
9.2(Construction ( As per Cl. 9.2 of IS 14927(Pt-1):2001))	-	0	-
9.3(Construction ( As per Cl. 9.3 of IS 14927(Pt-1):2001))	-	0	-
9.3.1(Construction ( As per Cl. 9.3.1 of IS 14927(Pt-1):2001))	-	500	-
9.3.2, table 3(Construction ( As per Cl. 9.3.2, Table-3 of IS 14927(Pt-1):2001))	-	0	-
9.4.1(Construction [Access to Live Parts (As per Cl. 9.4.1 of IS 14927(Pt-1):2001)])	-	0	-
9.5(Construction (As per Cl. 9.5 of IS 14927(Pt-1):2001))	-	0	-
9.6.2(Construction [Membranes (As per Cl.9.6.2 of IS: 14927 (Pt-1):2001)])	-	500	-
9.6.4(Construction [Membranes (As per Cl.9.6.4 of IS: 14927 (Pt-1):2001)])	-	0	-
9.7.2, table 4(Construction [Glands (As per Cl.9.7.2 and Table-4 of IS: 14927 (Pt-1):2001)] )	-	0	-
10(Mechanical Properties )	-	500	-
10.2(Cable supporting test for Surface mounting (As per Cl.10.2))	-	500	-
10.2(Cable supporting test for Surface mounting (As per Cl.10.2))	-	0	-
10.2(Cable supporting test for Surface mounting (As per Cl.10.2))	-	0	-
10.2(Cable supporting test for Surface mounting (As per Cl.10.2))	-	0	-
10.2(Cable supporting test for Surface mounting (As per Cl.10.2))	-	0	-
10.2.3(Cable supporting test for Surface mounting (As per Cl.10.2.3))	-	0	-
10.2.3(Cable supporting test for Surface mounting (As per Cl.10.2.3))	-	0	-
10.2.3(Cable supporting test for Surface mounting (As per Cl.10.2.3))	-	0	-
10.2.3(Cable supporting test for Surface mounting (As per Cl.10.2.3))	-	0	-
10.3(Impact Test [ Cl.10.3 ])	-	500	-
10.3.4(Impact Test (As per Cl. 10.3.4 of IS: 14927(Pt-1):2001) )	-	0	-
10.4(Linear Deflection Test [ Cl.10.4 ])	-	500	-
10.5(External load Test [ Cl.10.5 ])	-	1000	-
11.1.1(Resistance to flame propagation (As per Cl. 11.1.1))	-	1000	-
11.1.1(Resistance to flame propagation (As per Cl. 11.1.1))	-	1000	-
12.2(Electrical continuity Test for earthing or bonding [ Cl.12.2 ])	-	1000	-
12.2(Electrical continuity Test for earthing or bonding [ Cl.12.2 ])	-	0	-
12.3(Electrical Insulating Strength and Insulation Resistance Test. [ Cl.12.3 ])	-	0	-
12.3(Electrical Insulating Strength and Insulation Resistance Test. [ Cl.12.3 ])	-	0	-
12.3(Electrical Insulating Strength and Insulation Resistance Test. [ Cl.12.3 ])	-	500	-
13(External Influences )	-	500	-
7(Marking (as per Cl 7.1 of IS:14927(Pt-I ):2001))	-	0	-
7(Marking (as per Cl 7.1 of IS:14927(Pt-I ):2001))	-	0	-
7(Marking (as per Cl 7.1 of IS:14927(Pt-I ):2001))	-	0	-
7(Marking (as per Cl 7.1 of IS:14927(Pt-I ):2001))	-	0	-
7.101(Marking (as per Cl 7.1 of IS:14927(Pt-I ):2001))	-	0	-
7.102(Marking (as per Cl 7.1 of IS:14927(Pt-I ):2001))	-	0	-
7(Marking (as per Cl 7.2 of IS:14927(Pt-I ):2001))	-	0	-
8( Dimensions (As per cl.8.1 of IS 14927(Pt-1) : 2001))	-	500	-
8(Dimensions (As per cl.8.2 of IS 14927(Pt-1) : 2001)	-	500	-
8( Dimensions (As per cl.8.3 and Table-2 of IS 14927(Pt-1) : 2001))	-	0	-
8( Dimensions (As per cl.8.3 and Table-2 of IS 14927(Pt-1) : 2001))	-	0	-
8( Dimensions (As per cl.8.3 and Table-2 of IS 14927(Pt-1) : 2001))	-	0	-
8( Dimensions (As per cl.8.3 and Table-2 of IS 14927(Pt-1) : 2001))	-	0	-
8( Dimensions (As per cl.8.3 and Table-2 of IS 14927(Pt-1) : 2001))	-	0	-
8( Dimensions (As per cl.8.3 and Table-2 of IS 14927(Pt-1) : 2001))	-	500	-
8( Dimensions (As per cl.8.3 and Table-2 of IS 14927(Pt-1) : 2001))	-	0	-
8( Dimensions (As per cl.8.3 and Table-2 of IS 14927(Pt-1) : 2001))	-	0	-
9(Construction ( As per Cl. 9.1 of IS 14927(Pt-1):2001))	-	0	-
9.1.101(Construction)	-	500	-
9(Construction ( As per Cl. 9.2 of IS 14927(Pt-1):2001))	-	500	-
9(Construction ( As per Cl. 9.2 of IS 14927(Pt-1):2001))	-	0	-
9(Construction ( As per Cl. 9.2 of IS 14927(Pt-1):2001))	-	500	-
9(Construction ( As per Cl. 9.2 of IS 14927(Pt-1):2001))	-	0	-
9(Construction ( As per Cl. 9.3 of IS 14927(Pt-1):2001))	-	0	-
9(Construction ( As per Cl. 9.3.1 of IS 14927(Pt-1):2001))	-	0	-
9(Construction ( As per Cl. 9.3.2, Table-3 of IS 14927(Pt-1):2001))	-	0	-
9(Construction [Access to Live Parts (As per Cl. 9.4.1 of IS 14927(Pt-1):2001)])	-	0	-
9(Construction (As per Cl. 9.5 of IS 14927(Pt-1):2001))	-	0	-
9(Construction [Membranes (As per Cl.9.6.2 of IS: 14927 (Pt-1):2001)])	-	500	-
9(Construction [Membranes (As per Cl.9.6.4 of IS: 14927 (Pt-1):2001)])	-	0	-
9(Construction [Glands (As per Cl.9.7.2 and Table-4 of IS: 14927 (Pt-1):2001)] )	-	0	-
10(Mechanical Properties )	-	1000	-
10(Cable supporting test for Surface mounting (As per Cl.10.2))	-	500	-
10(Cable supporting test for Surface mounting (As per Cl.10.2))	-	500	-
10(Cable supporting test for Surface mounting (As per Cl.10.2))	-	0	-
10(Cable supporting test for Surface mounting (As per Cl.10.2))	-	0	-
10(Cable supporting test for Surface mounting (As per Cl.10.2))	-	0	-
10(Cable supporting test for Surface mounting (As per Cl.10.2.3))	-	0	-
10(Cable supporting test for Surface mounting (As per Cl.10.2.3))	-	0	-
10(Cable supporting test for Surface mounting (As per Cl.10.2.3))	-	0	-
10(Cable supporting test for Surface mounting (As per Cl.10.2.3))	-	0	-
10(Impact Test [ Cl.10.3 ])	-	1000	-
10(Impact Test (As per Cl. 10.3.4 of IS: 14927(Pt-1):2001) )	-	500	-
10(Linear Deflection Test [ Cl.10.4 ])	-	500	-
10(External load Test [ Cl.10.5 ])	-	500	-
11(Resistance to flame propagation (As per Cl. 11.1.1))	-	500	-
11(Resistance to flame propagation (As per Cl. 11.1.1))	-	500	-
12(Electrical continuity Test for earthing or bonding [ Cl.12.2 ])	-	500	-
12(Electrical continuity Test for earthing or bonding [ Cl.12.2 ])	-	500	-
12(Electrical Insulating Strength and Insulation Resistance Test. [ Cl.12.3 ])	-	500	-
12(Electrical Insulating Strength and Insulation Resistance Test. [ Cl.12.3 ])	-	500	-
12(Electrical Insulating Strength and Insulation Resistance Test. [ Cl.12.3 ])	-	500	-
13(External Influences )	-	500	-
4(General Requirements)	-	0	-
5(General Conditions for test)	-	0	-
7(Marking)	-	500	-
8(Dimensions)	-	500	-
9(Construction)	-	500	-
10(Mechanical Properties)	-	500	-
11(Resistance to flame propagation)	-	500	-
12(Electrical characteristics)	-	500	-
13(External Influences)	-	500	-

15 Jun, 2029

-
Included w.e.f 14.08.2025

5038

Standard Testing and Compliance Private Limited

6178726

IS 18112 (2025)

DIGITAL TELEVISION RECEIVER FOR SATELLITE BROADCAST TRANSMISSION SPECIFICATION (First Revision)

Digital Television Receiver for Satellite Broadcast Transmission — Specification

205000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4.4, Table-2, ii)(RF characteristics to be supported by the DTV receiver)	-	5000	-
Clause 4.3(Specifications)	-	5000	-
Clause 4.5(Safety Requirements)	-	5000	-
Clause 5(Marking)	-	5000	-
Clause 6(Operating Life Test)	-	5000	-
Clause 4.1, Table-1, i) a)(Hardware specification)	-	5000	-
Clause 4.1, Table-1, i) b)(Decompression and decoding of SDTV video)	-	5000	-
Clause 4.1, Table-1, i) c)(Decompression and decoding of HDTV video)	-	5000	-
Clause 4.1, Table-1, i) d)(Decompression and decoding of audio)	-	5000	-
Clause 4.1, Table-1, i) e)(Active Format descriptors)	-	5000	-
Clause 4.1, Table-1, i) f)(Captioning and Sub-titling)	-	5000	-
Clause 4.1, Table-1, i) g)(Teletext)	-	5000	-
Clause 4.1, Table-1, i) h)(Multi-language support)	-	5000	-
Clause 4.1, Table-1, i) j)(DTV receiver mixed Audio Description)	-	5000	-
Clause 4.1, Table-1, i) k)(Broadcast mixed audio description)	-	5000	-
Clause 4.1, Table-1, i) m)(Service demultiplexing)	-	5000	-
Clause 4.1, Table-1, i) n)(Data services)	-	5000	-
Clause 4.1, Table-1, i) p)(OSD)	-	5000	-
Clause 4.1, Table-1, i) q)(DTV character set)	-	5000	-
Clause 4.1, Table-1, i) r)(Electronic Service Guide (ESG) ‘Now/Next’)	-	5000	-
Clause 4.1, Table-1, i) s)(Time)	-	5000	-
Clause 4.1, Table-1, i) t)(Digital TV output)	-	5000	-
Clause 4.4, Table-2, i) b)(Frequency)	-	5000	-
Clause 4.4, Table-2, i) a)(Input voltage range)	-	5000	-
Clause 4.1,Table-1, ii) a)(Demodulation and FEC decoding)	-	5000	-
Clause 4.1, Table-1, ii) b)(DTV Receiver Installation)	-	5000	-
Clause 4.1, Table-1, ii) c)(Network evolution)	-	5000	-
Clause 4.4, Table-2, iii) c)(RF input impedance)	-	5000	-
Clause 4.1, Table-1, ii) d)(Services available)	-	5000	-
Clause 4.1, Table-1, ii) e)(Selection via Service List)	-	5000	-
Clause 4.1, Table-1, ii) f)(Selection via Numeric Entry)	-	5000	-
Clause 4.1, Table-1, ii) g)(Favourite Channel list)	-	5000	-
Clause 4.1, Table-1, ii) h)(Hidden Services)	-	5000	-
Clause 4.4, Table-2, iii) b)(Input frequency range)	-	5000	-
Clause 4.1, Table-1, ii) j)(Logical Channel Number for Satellite services)	-	5000	-
Clause 4.1, Table-1, ii) k)(RF input signal)	-	5000	-
Clause 4.1, Table-1, ii) m)(LNB supply current)	-	5000	-
Clause 4.1, Table-1, ii) n)(LNB supply voltage)	-	5000	-
Clause 4.1, Table-1, ii) p)(LNB Control)	-	5000	-
Clause 4.1, Table-1, ii) q)(Modulation/Demodulation parameters for DVB-S & DVB-S2 standard)	-	5000	-
Clause 4.4, Table-2, iii) a)(Input level per carrier)	-	5000	-
Clause 4.4, Table-2, iv) c)(RF input impedance)	-	5000	-
Clause 4.4, Table-2, iv) b)(Input frequency range)	-	5000	-
Clause 4.4, Table-2, iv) a)(Input level per carrier)	-	5000	-
Clause 4.4, Table-2, v)(Symbol rate)	-	5000	-
Clause 4.4, Table-2, vi)(RF input return loss)	-	5000	-
Clause 4.4, Table-2, vii)(DisEqC)	-	5000	-
Clause 4.4, Table-2, viii)(Operating ambient temperature range)	-	5000	-
Clause 4.4, Table-2, ix)(Operating humidity range)	-	5000	-
Clause 4.1, Table-1, iii) a)(Interfaces, Connectors)	-	5000	-
Clause 4.1, Table-1, iv)(Automatic software upgrade mechanism)	-	5000	-
Clause 4.1, Table-1, v) a)(Remote Control)	-	5000	-
Clause 4.1, Table-1, v) b)(Easy to use and simple documentation)	-	5000	-
Clause 3.1, Table-1, v) c)(Support package)	-	5000	-
Clause 4.4, Table-2, ii)(RF characteristics to be supported by the DTV receiver)	-	5000	-
Clause 4.3(Specifications)	-	5000	-
Clause 4.5(Safety Requirements)	-	5000	-
Clause 5(Marking)	-	5000	-
Clause 6(Operating Life Test)	-	5000	-
Clause 4.1, Table-1, i) a)(Hardware specification)	-	5000	-
Clause 4.1, Table-1, i) b)(Decompression and decoding of SDTV video)	-	5000	-
Clause 4.1, Table-1, i) c)(Decompression and decoding of HDTV video)	-	5000	-
Clause 4.1, Table-1, i) d)(Decompression and decoding of audio)	-	5000	-
Clause 4.1, Table-1, i) e)(Active Format descriptors)	-	5000	-
Clause 4.1, Table-1, i) f)(Captioning and Sub-titling)	-	5000	-
Clause 4.1, Table-1, i) g)(Teletext)	-	5000	-
Clause 4.1, Table-1, i) h)(Multi-language support)	-	5000	-
Clause 4.1, Table-1, i) j)(DTV receiver mixed Audio Description)	-	5000	-
Clause 4.1, Table-1, i) k)(Broadcast mixed audio description)	-	5000	-
Clause 4.1, Table-1, i) m)(Service demultiplexing)	-	5000	-
Clause 4.1, Table-1, i) n)(Data services)	-	5000	-
Clause 4.1, Table-1, i) p)(OSD)	-	5000	-
Clause 4.1, Table-1, i) q)(DTV character set)	-	5000	-
Clause 4.1, Table-1, i) r)(Electronic Service Guide (ESG) ‘Now/Next’)	-	5000	-
Clause 4.1, Table-1, i) s)(Time)	-	5000	-
Clause 4.1, Table-1, i) t)(Digital TV output)	-	5000	-
Clause 4.4, Table-2, i) b)(Frequency)	-	5000	-
Clause 4.4, Table-2, i) a)(Input voltage range)	-	5000	-
Clause 4.1,Table-1, ii) a)(Demodulation and FEC decoding)	-	5000	-
Clause 4.1, Table-1, ii) b)(DTV Receiver Installation)	-	5000	-
Clause 4.1, Table-1, ii) c)(Network evolution)	-	5000	-
Clause 4.4, Table-2, iii) c)(RF input impedance)	-	5000	-
Clause 4.1, Table-1, ii) d)(Services available)	-	5000	-
Clause 4.1, Table-1, ii) e)(Selection via Service List)	-	5000	-
Clause 4.1, Table-1, ii) f)(Selection via Numeric Entry)	-	5000	-
Clause 4.1, Table-1, ii) g)(Favourite Channel list)	-	5000	-
Clause 4.1, Table-1, ii) h)(Hidden Services)	-	5000	-
Clause 4.4, Table-2, iii) b)(Input frequency range)	-	5000	-
Clause 4.1, Table-1, ii) j)(Logical Channel Number for Satellite services)	-	5000	-
Clause 4.1, Table-1, ii) k)(RF input signal)	-	5000	-
Clause 4.1, Table-1, ii) m)(LNB supply current)	-	5000	-
Clause 4.1, Table-1, ii) n)(LNB supply voltage)	-	5000	-
Clause 4.1, Table-1, ii) p)(LNB Control)	-	5000	-
Clause 4.1, Table-1, ii) q)(Modulation/Demodulation parameters for DVB-S & DVB-S2 standard)	-	5000	-
Clause 4.4, Table-2, iii) a)(Input level per carrier)	-	5000	-
Clause 4.4, Table-2, iv) c)(RF input impedance)	-	5000	-
Clause 4.4, Table-2, iv) b)(Input frequency range)	-	5000	-
Clause 4.4, Table-2, iv) a)(Input level per carrier)	-	5000	-
Clause 4.4, Table-2, v)(Symbol rate)	-	5000	-
Clause 4.4, Table-2, vi)(RF input return loss)	-	5000	-
Clause 4.4, Table-2, vii)(DisEqC)	-	5000	-
Clause 4.4, Table-2, viii)(Operating ambient temperature range)	-	5000	-
Clause 4.4, Table-2, ix)(Operating humidity range)	-	5000	-
Clause 4.1, Table-1, iii) a)(Interfaces, Connectors)	-	5000	-
Clause 4.1, Table-1, iv)(Automatic software upgrade mechanism)	-	5000	-
Clause 4.1, Table-1, v) a)(Remote Control)	-	5000	-
Clause 4.1, Table-1, v) b)(Easy to use and simple documentation)	-	5000	-
Clause 3.1, Table-1, v) c)(Support package)	-	5000	-

10 Jul, 2027

-
Included w.e.f.01.09.2025 Exclusion lause 4.6 (Electromagnetic Compatibility (EMC) Requirements)

5039

Advance Firetec and Research Lab Pvt. Ltd

8176606

IS 5290 (2025)

Landing Valves - Specification (Fourth Revision)

Normal Type and Pressure Regulating Type

21700.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-6(FINISH)	-	500.00	For Cl. No. 6 (Finish) -200.00 + Cl. No. 3 - 150.00 + Cl. No. 4.1.1 / Cl. No. 4.1.2 - 150.00
Cl-7.1(Water Tightness Test for the Stop Valve)	-	5000.00	Cl. NO. 7.1.2 - 5000.00 / Cl. NO. 7.1.3 -5000.00
Cl-7.2(Hydrostatic Pressure Test)	-	5000.00	Cl. NO. 7.2.2 - 5000.00 / Cl. NO. 7.2.3 -5000.00
Cl-7.3(Flow Test)	-	5000.00	Cl. NO. 7.3.1 - 5000.00 / Cl. NO. 7.3.2 -5000.00
Cl-8(Marking)	-	200	-
Cl-4.3, Table-1(Flanged -Outer Diameter)	-	500.00	-
Cl-4.3, Table-1(Flanged - Thickness)	-	500.00	-
Cl-4.3, Table-1(Flanged -Pitch Circle Diameter (PCD))	-	500.00	-
Cl-4.3, Table-1(Flanged -No. of Holes × Diameter of Hole)	-	500.00	-
Cl-4.3, Table-1(Threaded)	-	500.00	-
Cl-4.2(shape and dimensions of)	-	3500.00	For Fig.1 - 1000.00 + Fig. 2- 2000.00 + Fig.5 - 500.00 / Fig.3 - 1000.00 + Fig.4 - 2000.00 + Fig.5 - 500.00
Cl-4.4(Outlet(s) of landing valve)	-	0.00	Testing charge is mentioned at Fig. 2 and Fig. 5.
Cl-4.4(dimensions- outlet adaptor)	-	0.00	Testing charge is mentioned at Fig. 2 and Fig. 5.
Cl-4.4(dimensions- Blank cap for outlet)	-	0.00	Testing charge is mentioned at Fig. 2 and Fig. 5.
Cl-6(FINISH)	-	0	Repeated One.
Cl-7.1(Water Tightness Test for the Stop Valve)	-	0	Repeated One.
Cl-7.2(Hydrostatic Pressure Test)	-	0	Repeated One.
Cl-7.3(Flow Test)	-	0	Repeated One.
Cl-8(Marking)	-	0	Repeated One.
Cl-4.3, Table-1(Flanged -Outer Diameter)	-	0	Repeated One.
Cl-4.3, Table-1(Flanged - Thickness)	-	0	Repeated One.
Cl-4.3, Table-1(Flanged -Pitch Circle Diameter (PCD))	-	0	Repeated One.
Cl-4.3, Table-1(Flanged -No. of Holes × Diameter of Hole)	-	0	Repeated One.
Cl-4.3, Table-1(Threaded)	-	0	Repeated One.
Cl-4.2(shape and dimensions of)	-	0	Repeated One.
Cl-4.4(Outlet(s) of landing valve)	-	0	Repeated One.
Cl-4.4(dimensions- outlet adaptor)	-	0	Repeated One.
Cl-4.4(dimensions- Blank cap for outlet)	-	0	Repeated One.
Cl-6(FINISH)	-	-	-
Cl-7.1(Water Tightness Test for the Stop Valve)	-	-	-
Cl-7.2(Hydrostatic Pressure Test)	-	-	-
Cl-7.3(Flow Test)	-	-	-
Cl-8(Marking)	-	-	-
Cl-4.3, Table-1(Flanged -Outer Diameter)	-	-	-
Cl-4.3, Table-1(Flanged - Thickness)	-	-	-
Cl-4.3, Table-1(Flanged -Pitch Circle Diameter (PCD))	-	-	-
Cl-4.3, Table-1(Flanged -No. of Holes × Diameter of Hole)	-	-	-
Cl-4.3, Table-1(Threaded)	-	-	-
Cl-4.2(shape and dimensions of)	-	-	-
Cl-4.4(Outlet(s) of landing valve)	-	-	-
Cl-4.4(dimensions- outlet adaptor)	-	-	-
Cl-4.4(dimensions- Blank cap for outlet)	-	-	-

03 Mar, 2030

-
Included w.e.f.23.09.2025 Exclusion Cl-5 (Material of Construction) Cl-5 (Finish)

5040

Aaditech Test and Calibration Lab LLP

8179926

IS 996 (2025)

SINGLE PHASE ac INDUCTION MOTORS FOR GENERAL PURPOSE (Fouth Revision)

Voltages upto and including 250 V and output upto and including 750W i.e blade/fan loaded motor applicable. W

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	0	-
16.1(Marking and Diagram of connenctions)	-	0	-
16.1(Marking and Diagram of connenctions)	-	0	-
16.1(Marking and Diagram of connenctions)	-	0	-
16.1(Marking and Diagram of connenctions)	-	0	-
16.1(Marking and Diagram of connenctions)	-	0	-
16.1(Marking and Diagram of connenctions)	-	0	-
16.1(Marking and Diagram of connenctions)	-	0	-
16.1(Marking and Diagram of connenctions)	-	0	-
16.1(Marking and Diagram of connenctions)	-	0	-
16.1(Marking and Diagram of connenctions)	-	0	-
16.1(Marking and Diagram of connenctions)	-	0	-
16.1(Marking and Diagram of connenctions)	-	0	-
16.1(Marking and Diagram of connenctions)	-	0	-
16.1(Marking and Diagram of connenctions)	-	0	-
16.1(Marking and Diagram of connenctions)	-	0	-
10(Type of enclosures)	-	1000	-
11(Methods of cooling)	-	0	-
9.1(General construction (as per Cl. 9 & F-3))	-	0	-
9(General construction (as per Cl. 9 & F-3))	-	0	-
9.4.11(General construction (as per Cl. 9 & F-3))	-	0	-
9(General construction (as per Cl. 9 & F-3))	-	0	-
9.4.11(General construction (as per Cl. 9 & F-3))	-	0	-
9.4.13(General construction (as per Cl. 9 & F-3))	-	0	-
4.1(Rated Voltage)	-	0	-
4.2(Rated Frequency)	-	0	-
4.3(Rated Output)	-	0	-
4.4(Rated Speed)	-	0	-
7(Dimensions (Cl.App.F-4))	-	0	-
9.5(Earthing)	-	0	-
9.5(Earthing)	-	0	-
9.5(Earthing)	-	0	-
17.3 (a)(No load test at rated voltage and frequency )	-	1000	-
17.3 (a)(No load test at rated voltage and frequency)	-	0	-
17.3 (a)(No load test at rated voltage and frequency)	-	0	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	1000	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	0	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	0	-
12.1.1(Test for Breakaway starting current at rated voltage and frequency (Cl.12.1.1 & Cl. 12.5))	-	0	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	1000	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	0	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	0	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	0	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	1000	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	0	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	0	-
12.7(Insulation resistance test)	-	500	-
13.1(High voltage test)	-	500	-
13.2(Moisture proofness)	-	2000	-
13.2(Moisture proofness)	-	0	-
13.3(Leakage current test)	-	500	-
12.6(Vibration Severity)	-	500	-
15.1(ADDITIONAL TESTS (For ECO - MARK))	-	500	-
15.1.5(Noise Level)	-	250	-
15.2(Specific Requirements)	-	0	-
16.1(Marking and Diagram of connenctions)	-	0	-
16.1(Marking and Diagram of connenctions)	-	0	-
16.1(Marking and Diagram of connenctions)	-	0	-
16.1(Marking and Diagram of connenctions)	-	0	-
16.1(Marking and Diagram of connenctions)	-	0	-
16.1(Marking and Diagram of connenctions)	-	0	-
16.1(Marking and Diagram of connenctions)	-	0	-
16.1(Marking and Diagram of connenctions)	-	0	-
16.1(Marking and Diagram of connenctions)	-	0	-
16.1(Marking and Diagram of connenctions)	-	0	-
16.1(Marking and Diagram of connenctions)	-	0	-
16.1(Marking and Diagram of connenctions)	-	0	-
16.1(Marking and Diagram of connenctions)	-	0	-
16.1(Marking and Diagram of connenctions)	-	0	-
16.1(Marking and Diagram of connenctions)	-	0	-
16.1(Marking and Diagram of connenctions)	-	0	-
16.1(Marking and Diagram of connenctions)	-	0	-
10(Type of enclosures)	-	0	-
11(Methods of cooling)	-	0	-
9.1(General construction (as per Cl. 9 & F-3))	-	0	-
9(General construction (as per Cl. 9 & F-3))	-	0	-
9.4.11(General construction (as per Cl. 9 & F-3))	-	0	-
9(General construction (as per Cl. 9 & F-3))	-	0	-
9.4.11(General construction (as per Cl. 9 & F-3))	-	0	-
9.4.13(General construction (as per Cl. 9 & F-3))	-	0	-
4.1(Rated Voltage)	-	0	-
4.2(Rated Frequency)	-	0	-
4.3(Rated Output)	-	0	-
4.4(Rated Speed)	-	0	-
9.5(Earthing)	-	0	-
9.5(Earthing)	-	0	-
9.5(Earthing)	-	0	-
17.3 (a)(No load test at rated voltage and frequency )	-	0	-
17.3 (a)(No load test at rated voltage and frequency)	-	0	-
17.3 (a)(No load test at rated voltage and frequency)	-	0	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	0	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	0	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	0	-
12.1.1(Test for Breakaway starting current at rated voltage and frequency (Cl.12.1.1 & Cl. 12.5))	-	250	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	0	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	0	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	0	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	0	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	0	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	0	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	0	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	0	-
12.7(Insulation resistance test)	-	0	-
13.1(High voltage test)	-	0	-
13.2(Moisture proofness)	-	0	-
13.2(Moisture proofness)	-	0	-
13.3(Leakage current test)	-	0	-
12.6(Vibration Severity)	-	0	-
15.1(ADDITIONAL TESTS (For ECO - MARK))	-	500	-
15.1.5(Noise Level)	-	0	-
15.2(Specific Requirements)	-	0	-
9.0(Observation)	-	0	-
7.2(Dimensions)	-	0	-
11.0(Observation)	-	0	-
17.3 (j)(Observation)	-	0	-
9.5(Observation)	-	0	-
14.0(Observation)	-	0	-
16.0(Observation)	-	0	-
17.4 & 9.4.6.1(Observation)	-	0	-
17.3 (k)(Current)	-	0	-
17.3 (m)(Vibration)	-	0	-
17.3 (g)(Insulation Resistance)	-	0	-
17.3 (h)(Voltage)	-	0	-
17.3 (b)(Temperature)	-	0	-
17.3 (e)(Temperature)	-	0	-
17.3 (f)(Torque)	-	0	-
17.3 (c)(Current, Torque)	-	0	-
17.3 (d)(Voltage, Current, Power, Frequency, Speed, Efficiency, Power factor, Slip)	-	0	-
17.3 (a)(Voltage, Current, Power, Frequency, Speed)	-	0	-
14(Terminal marking)	-	0	-
12.1.2(Momentary overload for motors)	-	0	-
16(Observation)	-	0	-
14(Observation)	-	0	-
9.5(Observation)	-	0	-
17.3 (a)(Voltage, Current, Power, Frequency, Speed)	-	0	-
17.3 (d)(Voltage, Current, Power, Frequency, Speed, Efficiency, Power factor, Slip)	-	0	-
17.3 (c)(Current, Torque)	-	0	-
17.3 (f)(Torque)	-	0	-
17.3 (e)(Temperature)	-	0	-
17.3 (b)(Temperature)	-	0	-
17.3 (h)(Voltage)	-	0	-
17.3 (g)(Insulation Resistance)	-	0	-
17.3 (m)(Vibration)	-	0	-
17.3 (j)(Observation)	-	0	-
17.3 (k)(Current)	-	0	-
11(Observation)	-	0	-
17.4 & 9.4.6.1(Observation)	-	0	-
7.2(Dimensions)	-	0	-
9(Observation)	-	0	-
16(Observation)	-	0	-
14(Observation)	-	0	-
9.5(Observation)	-	0	-
17.3 (a)(Voltage, Current, Power, Frequency, Speed)	-	0	-
17.3 (d)(Voltage, Current, Power, Frequency, Speed, Efficiency, Power factor, Slip)	-	0	-
17.3 (c)(Current, Torque)	-	0	-
17.3 (f)(Torque)	-	0	-
17.3 (e)(Temperature)	-	0	-
17.3 (b)(Temperature)	-	0	-
17.3 (h)(Voltage)	-	0	-
17.3 (g)(Insulation Resistance)	-	0	-
17.3 (m)(Vibration)	-	0	-
17.3 (j)(Observation)	-	0	-
17.3 (k)(Current)	-	0	-
11(Observation)	-	0	-
17.4 & 9.4.6.1(Observation)	-	0	-
7.2(Dimensions)	-	0	-
9(Observation)	-	0	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	0	-
Cl-7(Dimensions)	-	0	-
Cl-9.1(Mounting)	-	0	-
Cl-9.2(Terminal Box)	-	0	-
Cl-9.3(Mounting Constructions)	-	0	-
Cl-9.3(Mounting Constructions)	-	0	-
Cl-9.4(Constructional Features)	-	0	-
Cl-9.5(Earthing)	-	0	-
Cl-10.1(Enclosures)	-	0	-
Cl-12.1(Torques)	-	0	-
Cl-12.1.2(Momentary overload test)	-	0	-
Cl-12.2(Temperature Rise)	-	0	-
Cl-12.3(Short Time Rating)	-	0	-
Cl-12.4(Method of Testing)	-	0	-
Cl-12.5(Performance Values)	-	0	-
Cl-12.6(Limits of Vibration Severity)	-	0	-
Cl-12.7(Insulation Resistance)	-	0	-
Cl-13.1(High Voltage Values)	-	0	-
Cl-13.2(Moisture Proofness)	-	0	-
Cl-13.3(Leakage Current)	-	0	-
Cl-14(Winding Resistance Measurement)	-	0	-
Cl-15(REDUCED VOLTAGE RUNNING UP TEST AT NO LOAD)	-	0	-
Cl-16(NOISE LEVEL)	-	0	-
Cl-17(OVER SPEED TEST)	-	0	-
Cl-18(TERMINAL MARKING)	-	0	-
Cl-12.1.1(Test for torues at rated voltage and frequency)	-	0	-
Cl-12.1.1(Pull up Torque at rated voltage and frequency)	-	0	-
Cl-12.1.1(Test for breakaway starting current at rated voltage and frequency)	-	0	-
Cl-12.1.2(Breakaway (starting) torque at rated voltage and frequency)	-	0	-
Cl-12.5.1(Test for full-load performance at rated voltage and frequency)	-	0	-
Cl-21.5(Acceptance Tests)	-	0	-
Cl-7(Dimensions)	-	0	-
Cl-9.1(Mounting)	-	0	-
Cl-9.2(Terminal Box)	-	0	-
Cl-9.3(Mounting Constructions)	-	0	-
Cl-9.3(Mounting Constructions)	-	0	-
Cl-9.4(Constructional Features)	-	0	-
Cl-9.5(Earthing)	-	0	-
Cl-10.1(Enclosures)	-	0	-
Cl-12.1(Torques)	-	0	-
Cl-12.1.2(Momentary overload test)	-	0	-
Cl-12.2(Temperature Rise)	-	0	-
Cl-12.3(Short Time Rating)	-	0	-
Cl-12.4(Method of Testing)	-	0	-
Cl-12.5(Performance Values)	-	0	-
Cl-12.6(Limits of Vibration Severity)	-	0	-
Cl-12.7(Insulation Resistance)	-	0	-
Cl-13.1(High Voltage Values)	-	0	-
Cl-13.2(Moisture Proofness)	-	0	-
Cl-13.3(Leakage Current)	-	0	-
Cl-14(Winding Resistance Measurement)	-	0	-
Cl-15(REDUCED VOLTAGE RUNNING UP TEST AT NO LOAD)	-	0	-
Cl-16(NOISE LEVEL)	-	0	-
Cl-17(OVER SPEED TEST)	-	0	-
Cl-18(TERMINAL MARKING)	-	0	-
Cl-12.1.1(Test for torues at rated voltage and frequency)	-	0	-
Cl-12.1.1(Pull up Torque at rated voltage and frequency)	-	0	-
Cl-12.1.1(Test for breakaway starting current at rated voltage and frequency)	-	0	-
Cl-12.1.2(Breakaway (starting) torque at rated voltage and frequency)	-	0	-
Cl-12.5.1(Test for full-load performance at rated voltage and frequency)	-	0	-
Cl-21.5(Acceptance Tests)	-	0	-
Cl-7(Dimensions)	-	0	-
Cl-9.1(Mounting)	-	0	-
Cl-9.2(Terminal Box)	-	0	-
Cl-9.3(Mounting Constructions)	-	0	-
Cl-9.3(Mounting Constructions)	-	0	-
Cl-9.4(Constructional Features)	-	0	-
Cl-9.5(Earthing)	-	0	-
Cl-10.1(Enclosures)	-	0	-
Cl-12.1(Torques)	-	0	-
Cl-12.1.2(Momentary overload test)	-	0	-
Cl-12.2(Temperature Rise)	-	0	-
Cl-12.3(Short Time Rating)	-	0	-
Cl-12.4(Method of Testing)	-	0	-
Cl-12.5(Performance Values)	-	0	-
Cl-12.6(Limits of Vibration Severity)	-	0	-
Cl-12.7(Insulation Resistance)	-	0	-
Cl-13.1(High Voltage Values)	-	0	-
Cl-13.2(Moisture Proofness)	-	0	-
Cl-13.3(Leakage Current)	-	0	-
Cl-14(Winding Resistance Measurement)	-	0	-
Cl-15(REDUCED VOLTAGE RUNNING UP TEST AT NO LOAD)	-	0	-
Cl-16(NOISE LEVEL)	-	0	-
Cl-17(OVER SPEED TEST)	-	0	-
Cl-18(TERMINAL MARKING)	-	0	-
Cl-12.1.1(Test for torues at rated voltage and frequency)	-	0	-
Cl-12.1.1(Pull up Torque at rated voltage and frequency)	-	0	-
Cl-12.1.1(Test for breakaway starting current at rated voltage and frequency)	-	0	-
Cl-12.1.2(Breakaway (starting) torque at rated voltage and frequency)	-	0	-
Cl-12.5.1(Test for full-load performance at rated voltage and frequency)	-	0	-
Cl-21.5(Acceptance Tests)	-	0	-

-
Included w.e.f 15.10.2025

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number