BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15393 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

5161

Global Scientific Solution (P) Ltd.

8189526

IS 3315 (2024)

Direct Evaporative Air Cooler â Specification (Fourth Revision)

65000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Enclosure)	-	1000	-
Cl-5.2(Filter Pads)	-	1000	-
Cl-5.3(Sump Tank Capacities)	-	1000	-
Cl-5.4(Blower/Fan)	-	1000	-
Cl-5.4.3(Fan motor)	-	1000	-
Cl-5.5(Pump Set)	-	1000	-
Cl-5.6.1(Electrical wiring and connection)	-	1000	-
Cl-5.6.2(Suitable power cable)	-	2000	-
Cl-5.7(Switches)	-	2000	-
Cl-6(Rating Requirement)	-	1000	-
Cl-8.1(Performance Requirement)	-	40000	-
Cl-8.2(Sound Test)	-	10000	-
Cl-8.3(Air Delivery (Air Flow) Test)	-	20000	-
Cl-8.4(Cooling Efficiency Test)	-	20000	-
Cl-8.5(Power Consumption)	-	5000	-
Cl-8.6(EER Calculation Method)	-	20000	-
Cl-8.7(Drop Test)	-	5000	-
Cl-8.8(Air Cooler Blower/Fan Reliability Test)	-	5000	-
Cl-12.2.1(General Running Tests)	-	1000	-
Cl-12.2.2(Protection against Electric Shock)	-	1000	-
Cl-12.2.3(High Voltage Tests)	-	1000	-
Cl-12.2.4(Leakage Current)	-	1000	-
Cl-12.2.5(Provision for Earthing)	-	1000	-
Cl-12.2.6(Finish)	-	1000	-
Cl-13(Additional Requirement for ECO-Mark)	-	1000	-
Cl-14(Storage)	-	1000	-

31 Oct, 2028

-
-

5162

The Synthetic and Art Silk Mills' Research Association (SASMIRA), MUMBAI

7175004

IS 15853 (2009)

Textiles – Polyester blended woven suiting for uniforms

30050 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table 1, Sr. No.xvi(pH value of aqueous extract)	-	350	-
3(Manufacture)	-	100	-
3.1(Yarn)	-	200	-
3.2(Woven suiting Fabric)	-	100	-
3.2.1(Woven suiting Fabric)	-	100	-
4(Requirements)	-	0	-
4.1, Table 1,i)( i) Nominal count of warp and weft yarns (For guidance only) )	-	500	-
4.1, Table 1,ii)(Length,m)	-	200	-
4.1, Table 1,iii)(Overall widthc m)	-	200	-
4.1, Table 1,iv)(iv) Threads/dm: IS 1963 a) Warp b) Weft )	-	250	-
4.1, Table 1,v)(v) Mass, g/m2)	-	300	-
4.1, Table 1,vi)(vi) Fibres composition, percent : a) Polyester b) Viscose/cotton )	-	500	-
4.1, Table 1vi,i)(vii) Breaking strength on 5 cm × 20 cm strip, N (kgf), Min: a) Warpway b) Weftway )	-	500	-
4.1, Table 1,viii)(viii) Tear strength, N (kgf), Min: a) Wrap way b) Weft way )	-	500	-
4.1, Table 1,xi)(ix) Dimensional stability to dry heat at 150 ± 2o C, percent, Max: a) Warp way b) Weft way )	-	500	-
4.1, Table 1,x)(x) Soil release efficiency, Min: a) Initial (Finished) a) After 50 washes )	-	11800	inclusive of 50 washes
4.1, Table 1x,i)(xi) Crease recovery angle in dry state, degrees, Min (Initially and after three repeated washes) )	-	2000	before and after 3 washes
4.1, Table 1,xii)(xii) Pilling resistance, Min (After 5 h of test) )	-	400	-
4.1, Table 1,xiii)(xiii) Dimensional change on washing, percent, Max: a) Warpway b) Weftway )	-	1000	-
4.1, Table 1,xiv)(Abrasion resistance 5 000 rubs (Martindale method))	-	600	-
4.1, Table 1,xv)(xv) pH value of aqueous extract (Hot method) )	-	350	-
4.1, Table 1,xvi)(Colour fastness)	-	3400	colour fastness to light, washing, dry heat, perspiration, rubbing and hot pressing
4.2(Limited Flame Spread Requirement)	-	500	-
4.3(Anti-Bacterial Activity Value)	-	5600	before and after 30 washes
4.4(4.4 Sealed Sample)	-	100	-
Table 1, Sr. No.xvi(pH value of aqueous extract)	-	0	-
3(Manufacture)	-	0	-
3.1(Yarn)	-	0	-
3.2(Woven suiting Fabric)	-	0	-
4(Requirements)	-	0	-
3.2.1(Woven suiting Fabric)	-	0	-
4.1, Table 1,i)( i) Nominal count of warp and weft yarns (For guidance only) )	-	0	-
4.1, Table 1,ii)(Length,m)	-	0	-
4.1, Table 1,iii)(Overall widthc m)	-	0	-
4.1, Table 1,iv)(iv) Threads/dm: IS 1963 a) Warp b) Weft )	-	0	-
4.1, Table 1,v)(v) Mass, g/m2)	-	0	-
4.1, Table 1,vi)(vi) Fibres composition, percent : a) Polyester b) Viscose/cotton )	-	0	-
4.1, Table 1vi,i)(vii) Breaking strength on 5 cm × 20 cm strip, N (kgf), Min: a) Warpway b) Weftway )	-	0	-
4.1, Table 1,viii)(viii) Tear strength, N (kgf), Min: a) Wrap way b) Weft way )	-	0	-
4.1, Table 1,xi)(ix) Dimensional stability to dry heat at 150 ± 2o C, percent, Max: a) Warp way b) Weft way )	-	0	-
4.1, Table 1,x)(x) Soil release efficiency, Min: a) Initial (Finished) a) After 50 washes )	-	0	-
4.1, Table 1x,i)(xi) Crease recovery angle in dry state, degrees, Min (Initially and after three repeated washes) )	-	0	-
4.1, Table 1,xii)(xii) Pilling resistance, Min (After 5 h of test) )	-	0	-
4.1, Table 1,xiii)(xiii) Dimensional change on washing, percent, Max: a) Warpway b) Weftway )	-	0	-
4.1, Table 1,xiv)(Abrasion resistance 5 000 rubs (Martindale method))	-	0	-
4.1, Table 1,xv)(xv) pH value of aqueous extract (Hot method) )	-	0	-
4.1, Table 1,xvi)(Colour fastness)	-	0	-
4.1, Table 1,xvii)(None)	-	0	-
4.2(Limited Flame Spread Requirement)	-	0	-
4.3(Anti-Bacterial Activity Value)	-	0	-
4.4(4.4 Sealed Sample)	-	0	-
Table 1, Sr. No.xvi(pH value of aqueous extract)	-	0	-
3(Manufacture)	-	0	-
3.1(Yarn)	-	0	-
3.2(Woven suiting Fabric)	-	0	-
3.2.1(Woven suiting Fabric)	-	0	-
4(Requirements)	-	0	-
4.1, Table 1,i)( i) Nominal count of warp and weft yarns (For guidance only) )	-	0	-
4.1, Table 1,ii)(Length,m)	-	0	-
4.1, Table 1,iii)(Overall widthc m)	-	0	-
4.1, Table 1,iv)(iv) Threads/dm: IS 1963 a) Warp b) Weft )	-	0	-
4.1, Table 1,v)(v) Mass, g/m2)	-	0	-
4.1, Table 1,vi)(vi) Fibres composition, percent : a) Polyester b) Viscose/cotton )	-	0	-
4.1, Table 1vi,i)(vii) Breaking strength on 5 cm × 20 cm strip, N (kgf), Min: a) Warpway b) Weftway )	-	0	-
4.1, Table 1,viii)(viii) Tear strength, N (kgf), Min: a) Wrap way b) Weft way )	-	0	-
4.1, Table 1,xi)(ix) Dimensional stability to dry heat at 150 ± 2o C, percent, Max: a) Warp way b) Weft way )	-	0	-
4.1, Table 1,x)(x) Soil release efficiency, Min: a) Initial (Finished) a) After 50 washes )	-	0	-
4.1, Table 1x,i)(xi) Crease recovery angle in dry state, degrees, Min (Initially and after three repeated washes) )	-	0	-
4.1, Table 1,xii)(xii) Pilling resistance, Min (After 5 h of test) )	-	0	-
4.1, Table 1,xiii)(xiii) Dimensional change on washing, percent, Max: a) Warpway b) Weftway )	-	0	-
4.1, Table 1,xiv)(Abrasion resistance 5 000 rubs (Martindale method))	-	0	-
4.1, Table 1,xv)(xv) pH value of aqueous extract (Hot method) )	-	0	-
4.1, Table 1,xvi)(Colour fastness)	-	0	-
4.1, Table 1,xvii)(None)	-	0	-
4.2(Limited Flame Spread Requirement)	-	0	-
4.3(Anti-Bacterial Activity Value)	-	0	-
4.4(4.4 Sealed Sample)	-	0	-
Table 1, Sr. No.xvi(pH value of aqueous extract)	-	0	-
3(Manufacture)	-	0	-
3.1(Yarn)	-	0	-
3.2(Woven suiting Fabric)	-	0	-
3.2.1(Woven suiting Fabric)	-	0	-
4(Requirements)	-	0	-
4.1, Table 1,i)( i) Nominal count of warp and weft yarns (For guidance only) )	-	0	-
4.1, Table 1,ii)(Length,m)	-	0	-
4.1, Table 1,iii)(Overall widthc m)	-	0	-
4.1, Table 1,iv)(iv) Threads/dm: IS 1963 a) Warp b) Weft )	-	0	-
4.1, Table 1,v)(v) Mass, g/m2)	-	0	-
4.1, Table 1,vi)(vi) Fibres composition, percent : a) Polyester b) Viscose/cotton )	-	0	-
4.1, Table 1vi,i)(vii) Breaking strength on 5 cm × 20 cm strip, N (kgf), Min: a) Warpway b) Weftway )	-	0	-
4.1, Table 1,viii)(viii) Tear strength, N (kgf), Min: a) Wrap way b) Weft way )	-	0	-
4.1, Table 1,xi)(ix) Dimensional stability to dry heat at 150 ± 2o C, percent, Max: a) Warp way b) Weft way )	-	0	-
4.1, Table 1,x)(x) Soil release efficiency, Min: a) Initial (Finished) a) After 50 washes )	-	0	-
4.1, Table 1x,i)(xi) Crease recovery angle in dry state, degrees, Min (Initially and after three repeated washes) )	-	0	-
4.1, Table 1,xii)(xii) Pilling resistance, Min (After 5 h of test) )	-	0	-
4.1, Table 1,xiii)(xiii) Dimensional change on washing, percent, Max: a) Warpway b) Weftway )	-	0	-
4.1, Table 1,xiv)(Abrasion resistance 5 000 rubs (Martindale method))	-	0	-
4.1, Table 1,xv)(xv) pH value of aqueous extract (Hot method) )	-	0	-
4.1, Table 1,xvi)(Colour fastness)	-	0	-
4.1, Table 1,xvii)(None)	-	0	-
4.2(Limited Flame Spread Requirement)	-	0	-
4.3(Anti-Bacterial Activity Value)	-	0	-
4.4(4.4 Sealed Sample)	-	0	-
4.1, Table 1,xvii)(None)	-	0	-

14 Dec, 2026

-
Included w.e.f 03.06.2025

5163

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 13164 (1991)

Ferrosilicomagnesium - Specification

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause-3.2.1(Tapped Lot Method)	-	12500	For complete testing
Clause-3.2.2(Graded Lot Method)	-	12500	For complete testing
Clause-3.2.3(Blended Lot Method)	-	12500	For complete testing
Clause-3.3(Definition)	-	12500	For complete testing
Clause-4(Grades)	-	12500	For complete testing
Clause-6(Supply of Material)	-	12500	For complete testing
Clause-7.1(Constitution of Consignment)	-	12500	For complete testing
Clause-7.2.1, Table-1(Si)	-	12500	For complete testing
Clause-7.2.1, Table-1(Mg)	-	12500	For complete testing
Clause-7.2.1, Table-1(Al, Max)	-	12500	For complete testing
Clause-7.2.1, Table-1(Ca, Max)	-	12500	For complete testing
Clause-8.1(Size Range)	-	12500	For complete testing
Clause-12(Marking)	-	12500	For complete testing

-
Included w.e.f.10.07.2025

5164

Central institute of Petrochemicals Engineering & Technology (CIPET), Raipur

5163604

IS 15450 (2004)

Polyethylene/aluminium/polyethylene composite pressure pipes for hot and cold water supplies - Specification

16069.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8, Table-2(Dimension)	-	250.00	Pipe test charges 16068.78.00+ extra 18% GST charges clause no .10.8 of hydraulic test charges test charges 2700.00 clause no. 11.1 long term test charges 4800.00 & clause no.11.1.2 migration test charges 2325.00 Clause no.11.1.3 OIT charges 2200
10.1(Density )	-	500.00	-
10.6(Apparent tensile strength of pipe)	-	1600.00	Appearance tensile strength charges 1100.00+ Specimen preparation charges 500.00
10.7(minimum burst pressure)	-	1000.00	-
Clause 10.3 table 3(Carbon black content)	-	925.00	-

25 Apr, 2028

-
-

5165

Central institute of Petrochemicals Engineering & Technology (CIPET), Raipur

5163604

IS 14885 (2001)

Polyethylene pipes for the supply of gaseous fuels - Specification

upto 63mm & above 63mm dia

56175.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.4(Colour)	-	300.00	For BIS ( up to 63mm dia.) test charges 45,125.00 + GST Charges For BIS (Above 63 mm dia) . Charges 56,175.00 + GST Charges For Cl No: 5.5 Chemical charges shall be extra. Cl no: 5.6 (optional) Type test 10,000hrs/20 deg C, charges 4,00,000.00+GST
Table-2, 5.1(Conventional Density, IS 7328:1992)	-	500.00	Material Testing
Table-2, 5.1(Melt Flow Rate, IS 2530:1963)	-	1100.00	Material Testing
Table-2, 5.1(Thermal Staibility, Annex-D)	-	2200.00	Material Testing
Table-2, 5.1(Resistance to gas constituents, Cl 5.5)	-	6250.00	Condensate and stand i n air for 1500 hr . Charges 1000.00 & Specimen preparation charges 4000.00 After Conditioning hydro hydraulic at 20 hr. charges 1000.00 & Specimen preparation charges 250.00 chemical charges shall be extra.
Table-2, 5.1(Pigment dispersion, Annex-E)	-	600.00	Material Testing
6.1, Table-3(Ovality Pipe, Cl 6.3.2)	-	300.00	Pipe Testing
6.1, Table-3(Nominal Outside Diameter of Pipes , Cl 6.3.1)	-	200.00	Pipe Testing
6.2.1, Table-4(Minimum Wall Thickness, Cl.6.3, Cl.6.2.1.1, Table-5)	-	300.00	Pipe Testing
6.4(Length of pipe)	-	200.00	Pipe Testing
7, Table-6(Maximmn Out of Square of Each Pipe End)	-	300.00	Pipe Testing
8.1(Hydraulic Charactristics, Annex-A)	-	20300.00	Hydraulic Characteristic 165 hr .Charges 4800.00 & specimen charges 250.00 100 hr. charges 4000.00 1000 hr. Charges 11000.00 & Specimen charges 250.00
8.2(Reversion Test. Annex-C)	-	700.00	Pipe Testing
8.3(Density, Annex A of IS 7328)	-	500.00	Pipe Testing
8.4(Melt Flow Rate (MFR), IS 2530)	-	1100.00	Pipe Testing
8.5(Thermal Stability to Oxidation, Annex-D)	-	2200.00	Pipe Testing
8.7(Tensile yield strength, Annex-J)	-	1250.00	Tensile Strength charges 1100.00 & Specimen Charges 250.00
8.7(Elongation at break, Annex-J)	-	1250.00	Elongation at break charges 1100.00 & Specimen Charges 250.00
8.8(Resistance to Weathering, Annex-F)	-	12800.00	Weathering charges at 6 month 9000.00 Elongation at break 1100.00 & specimen charges 250.00 OIT charges 2200.00
8.9(Squeeze off, Annex-G)	-	1300.00	Pipe Testing

25 Apr, 2028

-
-

5166

Central institute of Petrochemicals Engineering & Technology (CIPET), Raipur

5163604

IS 4985 (2000)

Unplasticized pvc pipes for potable water supplies - Specification (Third Revision)

8606 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Minimum))	-	500	Testing Charges are Excluding GST PVC Resin Testing Charge : 3075 Extra
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Maximum))	-	500	Testing Charges are Excluding GST
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Mamimum))	-	500	Testing Charges are Excluding GST
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Minimum))	-	500	Testing Charges are Excluding GST
11.1.1(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Plumbing pipes)	-	850	Testing Charges are Excluding GST
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Integral Sealing Ring Sockets)	-	850	Testing Charges are Excluding GST
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test))	-	850	Testing Charges are Excluding GST
10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density)	-	500	Testing Charges are Excluding GST
10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature)	-	1100	Testing Charges are Excluding GST
10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test)	-	700	Testing Charges are Excluding GST
11.2(Resistance to External Blows at 0°C)	-	1000	Testing Charges are Excluding GST
7.1.2.1(DIMENSIONS-PIPE-Average Thickness)	-	500	Testing Charges are Excluding GST
7.1.2.1(DIMENSIONS-PIPE-Thickness(Maximum))	-	500	Testing Charges are Excluding GST
7.1.2.1(DIMENSIONS-PIPE-Thickness(Minimum))	-	500	Testing Charges are Excluding GST
Clause 10.7(Sulphated Ash Content)	-	950	Testing Charges are Excluding GST
9.1(PIPE ENDS)	-	500	Testing Charges are Excluding GST
10.1.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	300	Testing Charges are Excluding GST
8(SEALING RINGS)	-	0	-
5(CLASSIFICATION OF PIPES)	-	0	-

25 Apr, 2028

-
-

5167

Central institute of Petrochemicals Engineering & Technology (CIPET), Raipur

5163604

IS 14151 : Part 2 (2008)

Irrigation equipment - Sprinkler pipes - Specification: Part 2 quick coupled polyethylene pipes and fittings (Second Revision)

34981 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1.3.1.1(Weldability Test)	-	1600	Testing Charges are Excluding GST
6.1.3, 6.1.3.1(Weldability Test)	-	4800	Testing Charges are Excluding GST
6.1.2.2( Hydraulic Proof Test)	-	850	Testing Charges are Excluding GST
6.1.1, 6.1.1.1(Leakage Test)	-	850	Testing Charges are Excluding GST
5.3(Dimensions of Quick Coupled Sprinkler Saddles Table 1.)	-	500	Testing Charges are Excluding GST
4.2.7(End caps Table 1 of IS 8008 (Part 9))	-	500	Testing Charges are Excluding GST
7.2.1 (Visual and Workmanship Requirement)	-	300	Testing Charges are Excluding GST
6.1.3.2 (Quick coupled fittings)	-	0	-
6.2, 6.2.1 (Quick Coupled Fittings)	-	0	-
4.1 .3(Workmanship and Appearance)	-	300	Testing Charges are Excluding GST
Cl 4.1.5(Rubber rings- A)Shore hardness (Shore-A))	-	375	Testing Charges are Excluding GST
Cl 4.1.5(Rubber rings- B) Change in hardness)	-	0	-
Cl 4.1.5(Rubber rings- C)Rubber ring shall be of black colour:)	-	375	Testing Charges are Excluding GST

25 Apr, 2028

-
-

5168

Central institute of Petrochemicals Engineering & Technology (CIPET), Raipur

5163604

IS 15410 (2003)

Containers for packaging of natural mineral water and packaged drinking water - Specification

6938 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.0 (chem)(MATERIAL)	-	1050	Testing Charges are Excluding GST
4.6.4(DROP TEST)	-	1100	Testing Charges are Excluding GST
4.6.5(MIGRATION TEST)	-	1700	Testing Charges are Excluding GST
4.6.6(PORTABILITY TEST)	-	2900	Testing Charges are Excluding GST
4.6.5.1 (chem)(Colour migration (Caps))	-	1700	Testing Charges are Excluding GST
Cl. 4.6.5 (chem)(Cl. 4.6.5 Overall migration (Caps))	-	0	-
4.2(Design, Shape & Dimension )	-	300	Testing Charges are Excluding GST
4.6.2(TRANSPARANCY)	-	700	Testing Charges are Excluding GST

25 Apr, 2028

-
-

5169

Central institute of Petrochemicals Engineering & Technology (CIPET), Raipur

5163604

IS 15609 (2005)

Polyethylene flexible pouches for the packing of natural mineral water and packaged drinking water - Specification

10500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Material)	-	1050	Testing Charges are Excluding GST
6.1.5 A-2 of IS: 2508:2016(Thickness)	-	200	Testing Charges are Excluding GST
6.1.7 IS: 9845:1998(Migration- b. Colour migration)	-	1700	Testing Charges are Excluding GST
6.1.6(Width)	-	250	Testing Charges are Excluding GST
6.1.8 Annex 4 of IS:2508:2016(Tensile Strength a. Lengthwise direction)	-	1100	Testing Charges are Excluding GST
6.1.8 Annex 4 of IS:2508:2016(Tensile Strength b. Crosswise direction)	-	1100	Testing Charges are Excluding GST
6.1.9 Annex 4 of IS:2508:2016(Elongation at break - a. Lengthwise direction)	-	1100	Testing Charges are Excluding GST
6.1.9 Annex 4 of IS:2508:2016(Elongation at break - b. Crosswise direction)	-	1100	Testing Charges are Excluding GST
6.1.10 Annex -6 of IS:2508:2016(Dart impact Resistance)	-	850	Testing Charges are Excluding GST
7.3 Annex G(Drop test )	-	900	Testing Charges are Excluding GST
7.4 Annex H(Ink adhesion test for printed pouches)	-	500	Testing Charges are Excluding GST
7.1 Annex E(Water Potability test (after 30 Days) a) Taste b) Odour)	-	2900	Testing Charges are Excluding GST
7.5 Annex J(Product resistance test for printed pouches)	-	500	Testing Charges are Excluding GST
6.1.4(Odour)	-	0	-
6.1.2(Film Form)	-	0	-
6.1.3(Winding of the Film )	-	0	-

25 Apr, 2028

-
-

5170

Central institute of Petrochemicals Engineering & Technology (CIPET), Raipur

5163604

IS 9755 (2016)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packing fertilizers – Specification (fifth revision)

30785 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.6(Bottom Seam-The number of stitches/dm shall be 14 ± 2.)	-	250	Testing charges are excluding GST
3.4(Liner-The thickness(A-2 of IS 2508) shall be 40 μm ± 10 percent in case of HMHDPE/ HDPE.)	-	250	Testing charges are excluding GST
3.4(Liner-The thickness(A-2 of IS 2508) shall be 70 μm ± 10 percent in case of LDPE/LLDPE)	-	250	Testing charges are excluding GST
3.5(Bottom Seam-The two rows of stitches shall be separated from each other by minimum 5 mm)	-	250	Testing charges are excluding GST
3.6(Bottom Seam-the outer stitch shall be minimum 8 mm from the outer edge of the sacks.)	-	250	Testing charges are excluding GST
3.4(Liner-The width of the loose liner shall be minimum 20 mm more than the width of the sack.)	-	250	Testing charges are excluding GST
3.4.2(Liner-The bottom seal of the loose liner shall be at least 25 mm from the bottom edge.)	-	250	Testing charges are excluding GST
3.6(Bottom Seam-tThe stitching shall be done with double fold over seam to a depth of minimum 25 mm, so that the stitches pass through a minimum of six layers of the fabric.)	-	250	Testing charges are excluding GST
3.1(MANUFACTURE-Raw Material)	-	1050	Testing charges are excluding GST
4.3(Mass-(Annexure E))	-	500	Testing charges are excluding GST
4.1 , Table 1(REQUIREMENTS)	-	17130	Testing charges are excluding GST
3.3.1(Sacks-Table 1)	-	4900	Testing charges are excluding GST

25 Apr, 2028

-
-

5171

Central institute of Petrochemicals Engineering & Technology (CIPET), Raipur

5163604

IS 14333 (1996)

High Density Polyethylene Pipe For Sewerage -

9281 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Dimensions of pipes)	-	250	Testing Charges are Excluding GST In addition Raw Material testing Charges: 4294
8.1(Hydraulic characteristics)	-	1600	Testing Charges are Excluding GST Type Test testing Charge : 4800
8.2(Reversion)	-	700	Testing Charges are Excluding GST
8.3(Density)	-	500	Testing Charges are Excluding GST
8.4(Melt Flow Rate)	-	1100	Testing Charges are Excluding GST
Cl. 8.5, IS 2530-1963, Cl. 10(Cabon Black Content)	-	925	Testing Charges are Excluding GST
Cl. 8.5, IS 2530-1963, Cl. 16(Carbon Black Dispersion)	-	700	Testing Charges are Excluding GST
7(Visual Appearance)	-	300	Testing Charges are Excluding GST
4(Colour)	-	300	Testing Charges are Excluding GST
10(Marking)	-	0	-
3(Designation)	-	0	-

25 Apr, 2028

-
-

5172

Central institute of Petrochemicals Engineering & Technology (CIPET), Raipur

5163604

IS 14151 : Part 1 (1999)

Irrigation equipment - Sprinkler pipes - Specification: Part 1 polyethylene pipes (First Revision)

15069 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(melt flow rating (MFR) shall not exceed 1.10 g/10 min.)	-	1100	Testing Charges are Excluding GST Raw Material Testing Charges : 4244
4.1.1(density shall be between 940.4 kg/m’ and 958.4 kg/m3 (both inclusive) when determined at 27°C according to procedure prescribed in Annex A of IS 7328. The value of the density shall also not differ from the nominal value by more than 3 kg/m2 as per 5.2.1.1 of IS 7328.)	-	500	Testing Charges are Excluding GST
4.1.2(The MFR of the material shall be between 0.2 to 1.1 (both inclusive) when tested at 190 T at a nominal load of 50 N by the method prescribed in 7 of IS 2530. The MFR of the material shall also be within 20% of the value declared by the manufacturer.’)	-	1100	Testing Charges are Excluding GST
Cl. 4.2 , IS 2530-1963, Cl. 10(Cabon Black Content)	-	925	Testing Charges are Excluding GST
5.1.2(Ovality)	-	500	Testing Charges are Excluding GST
7.1 Table -2(Hydraulic Characteristics)	-	1600	Testing Charges are Excluding GST Quality Test Charge : 4800 as per table-2
7.3(Tensile Test)	-	1350	Testing Charges are Excluding GST
7.2(Reversion Test)	-	1000	Testing Charges are Excluding GST
7.6(Melt now Rate (MFR))	-	1100	Testing Charges are Excluding GST
7.4table-2(Fusion Compatibility Test)	-	1600	Testing Charges are Excluding GST
Cl.7.4(Fusion Compatibility Test- a) Quality test)	-	4800	Testing Charges are Excluding GST

25 Apr, 2028

-
-

5173

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 1466 (1985)

Specification for ferrovanadium (Third Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause-2.1(Ferro Vanadium)	-	15000	For complete testing
Clause-3(Grades)	-	15000	For complete testing
Clause-4(Supply of Material)	-	15000	For complete testing
Clause-5(Chemical Composition)	-	15000	For complete testing
Clause-6(Norminal size Ranges)	-	15000	For complete testing
Clause-9(Marking)	-	15000	For complete testing
3 & 5(V)	-	15000	For complete testing
3 & 5(Si)	-	15000	For complete testing
3 & 5(C)	-	15000	For complete testing
3 & 5(S)	-	15000	For complete testing
3 & 5(P)	-	15000	For complete testing
3 & 5(Al)	-	15000	For complete testing
3 & 5(Mn)	-	15000	For complete testing
3 & 5(Cr)	-	15000	For complete testing
3 & 5(Cu)	-	15000	For complete testing
3 & 5(Ni)	-	15000	For complete testing
3 & 5(Pb)	-	15000	For complete testing
3 & 5(Sn)	-	15000	For complete testing
3 & 5(Zn)	-	15000	For complete testing
3 & 5(Mo)	-	15000	For complete testing
3 & 5(Ti)	-	15000	For complete testing
Clause-2.1(Ferro Vanadium)	-	-	-
Clause-3(Grades)	-	-	-
Clause-4(Supply of Material)	-	-	-
Clause-5(Chemical Composition)	-	-	-
Clause-6(Norminal size Ranges)	-	-	-
Clause-9(Marking)	-	-	-
3 & 5(V)	-	-	-
3 & 5(Si)	-	-	-
3 & 5(C)	-	-	-
3 & 5(S)	-	-	-
3 & 5(P)	-	-	-
3 & 5(Al)	-	-	-
3 & 5(Mn)	-	-	-
3 & 5(Cr)	-	-	-
3 & 5(Cu)	-	-	-
3 & 5(Ni)	-	-	-
3 & 5(Pb)	-	-	-
3 & 5(Sn)	-	-	-
3 & 5(Zn)	-	-	-
3 & 5(Mo)	-	-	-
3 & 5(Ti)	-	-	-

-
Included w.e.f.10.07.2025

5174

Sleen India Biz venture Private Limited, Agra

9139736

IS 17483 : Part 1 (2020)

Geosynthetics - Geocells - Specification Part 1 Load Bearing Application

All type

165000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1(Density- IS 13360 (part-3) sec-10)	-	500	-
1(Environmental stress crack resistance – Notched constant tensile load (ESCR - NCTL), 400 h- IS 16346)	-	5000	-
1(Environmental stress crack resistance (ESCR), 5000 h - IS 17483 (part-1) Annex C)	-	5000	-
1(Carbon black content- IS 2530)	-	1000	-
1(cell wall thickness at a pressure of 2 ± 0.01 kPa- IS 13162 (part-3))	-	500	-
1("Seam peel-strength per 25 mm of cell depth- IS 17369 (part-1) method-B")	-	500	-
1("Seam weld hang strength for 100 mm of seam weld under constant dead weight of 72.5 kg for 7 days at 54 ± 2 °C- IS 17483 (part-1)Annex D")	-	0	-
1("Retention of breaking strength after UV exposure of 500 h- IS 17483 (part-1) Annex-E")	-	40000	-
1("Friction efficiency- IS 17483 (part-1)Annex F")	-	5000	-
Clause No. 5.2(Dimensions)	-	500	-
Clause No. 5.4(Perforations)	-	500	-
Clause No. 5.5(Seam Weld)	-	500	-
Clause No. 5.3(Surface density of indentation)	-	500	-
Clause No. 5.3(Asperity height)	-	500	-
Clause No. 6.2, Table No. 1 (i)(Density, g/cm3)	-	0	-
Clause No. 6.2, Table No. 1 (ii)(Environmental stress crack resistance – Notched constant tensile load (ESCR - NCTL), 400 h)	-	0	-
Clause No. 6.2, Table No. 1 (iii)(Environmental stress crack resistance (ESCR), 5000 h)	-	0	-
Clause No. 6.2, Table No. 1 (iv)(Carbon black content, percent)	-	0	-
Clause No. 6.2, Table No. 1 (v)(Post texturing strip/cell wall thickness at a pressure of 2 ± 0.01 kPa, mm)	-	500	-
Clause No. 6.2, Table No. 1 (vi)(Seam peel-strength per 25 mm of cell depth, N)	-	0	-
Clause No. 6.2, Table No. 1 (vii)(Seam weld hang strength for 100 mm of seam weld under constantdead weight of 72.5 kg for 7 days at 54 ± 2 °C)	-	0	-
Clause No. 6.2, Table No. 1 (viii)(Resistance to oxidation, Retained tensile strength, percent)	-	65000	-
Clause No. 6.2, Table No. 1 (ix)(Retention of breaking strength after UV exposure of 500 h)	-	40000	-
Clause No. 6.2, Table No. 1 (x)(Friction efficiency, percent)	-	0	-
Clause No. 6.2, Table No. 1 (xi)(Standard oxidative induction time, minutes)	-	10000	-
Clause No. 6.2, Table No. 1 (xii)(High pressure oxidative induction time, minutes)	-	0	-
Clause No. 8(Geocells panel packaging)	-	500	-
Clause No. 9.1(Geocells labelling, shipment, storage and handling)	-	1000	-
6.2 Table 1(UV resistance strength retained after 500h exposure (Percent))	-	0	-
6.2 Table 1(Resistance to oxidation Retained strength %)	-	0	-
6.2 Table 1(Density g/cc)	-	0	-
6.2 Table 1(Environmental Stress crack resistance, Notch constant tensile load (ESCR-NCTL) 400h min)	-	0	-
6.2 Table 1(Environmental Stress crack resistance, Notch constant tensile load (ESCR-NCTL) 400h min)	-	0	-
6.2 Table 1(Carbon black content, Percent)	-	0	-
6.2 Table 1(Post texturing strip/cell wall thickness at a pressure of 2 ± 0.01 kPa, mm)	-	0	-
6.2 Table 1(Seam peel-strength per 25 mm of cell depth, N,)	-	0	-
6.2 Table1(Seam weld hang strength for 100 mm of seam weld under constant dead weight of 72.5 kg for 7days at 54 C)	-	20000	-
6.2 Table 1(Friction efficiency, percent)	-	5000	-
6.2 Table 1(Standard Oxidation Induction time, min)	-	10000	-
6.2 Table 1(High pressure oxidation induction time, min)	-	0	-
CL 6.1(Dimensional Stability)	-	500	-
CL 5.5(Seam weld width, mm)	-	500	-
CL 5.4(Perforation area %)	-	500	-
CL 5.3(Texture density per sq cm)	-	500	-
CL 5.2(Cell depth, Pocket size, mm)	-	500	-
CL 4.4(Resistnce to chemical retained strength %)	-	5000	-
6.2 Table 1(Seam peel strength per 25 mm cell depth, N)	-	0	-
6.2 Table 1(Environmental Stress crack resistance, ESCR 5000h)	-	0	-
4.1(Material Identification)	-	500	-
1(Density- IS 13360 (part-3) sec-10)	-	0	-
1(Environmental stress crack resistance – Notched constant tensile load (ESCR - NCTL), 400 h- IS 16346)	-	0	-
1(Environmental stress crack resistance (ESCR), 5000 h - IS 17483 (part-1) Annex C)	-	0	-
1(Carbon black content- IS 2530)	-	0	-
1(cell wall thickness at a pressure of 2 ± 0.01 kPa- IS 13162 (part-3))	-	0	-
1("Seam peel-strength per 25 mm of cell depth- IS 17369 (part-1) method-B")	-	0	-
1("Seam weld hang strength for 100 mm of seam weld under constant dead weight of 72.5 kg for 7 days at 54 ± 2 °C- IS 17483 (part-1)Annex D")	-	0	-
1("Retention of breaking strength after UV exposure of 500 h- IS 17483 (part-1) Annex-E")	-	0	-
1("Friction efficiency- IS 17483 (part-1)Annex F")	-	0	-
Clause No. 5.2(Dimensions)	-	0	-
Clause No. 5.4(Perforations)	-	0	-
Clause No. 5.5(Seam Weld)	-	0	-
Clause No. 5.3(Surface density of indentation)	-	0	-
Clause No. 5.3(Asperity height)	-	0	-
Clause No. 6.2, Table No. 1 (i)(Density, g/cm3)	-	0	-
Clause No. 6.2, Table No. 1 (ii)(Environmental stress crack resistance – Notched constant tensile load (ESCR - NCTL), 400 h)	-	0	-
Clause No. 6.2, Table No. 1 (iii)(Environmental stress crack resistance (ESCR), 5000 h)	-	0	-
Clause No. 6.2, Table No. 1 (iv)(Carbon black content, percent)	-	0	-
Clause No. 6.2, Table No. 1 (v)(Post texturing strip/cell wall thickness at a pressure of 2 ± 0.01 kPa, mm)	-	0	-
Clause No. 6.2, Table No. 1 (vi)(Seam peel-strength per 25 mm of cell depth, N)	-	0	-
Clause No. 6.2, Table No. 1 (vii)(Seam weld hang strength for 100 mm of seam weld under constantdead weight of 72.5 kg for 7 days at 54 ± 2 °C)	-	0	-
Clause No. 6.2, Table No. 1 (viii)(Resistance to oxidation, Retained tensile strength, percent)	-	0	-
Clause No. 6.2, Table No. 1 (ix)(Retention of breaking strength after UV exposure of 500 h)	-	0	-
Clause No. 6.2, Table No. 1 (x)(Friction efficiency, percent)	-	0	-
Clause No. 6.2, Table No. 1 (xi)(Standard oxidative induction time, minutes)	-	0	-
Clause No. 6.2, Table No. 1 (xii)(High pressure oxidative induction time, minutes)	-	0	-
Clause No. 8(Geocells panel packaging)	-	0	-
Clause No. 9.1(Geocells labelling, shipment, storage and handling)	-	0	-
6.2 Table 1(UV resistance strength retained after 500h exposure (Percent))	-	0	-
6.2 Table 1(Resistance to oxidation Retained strength %)	-	0	-
6.2 Table 1(Density g/cc)	-	0	-
6.2 Table 1(Environmental Stress crack resistance, Notch constant tensile load (ESCR-NCTL) 400h min)	-	0	-
6.2 Table 1(Environmental Stress crack resistance, Notch constant tensile load (ESCR-NCTL) 400h min)	-	0	-
6.2 Table 1(Carbon black content, Percent)	-	0	-
6.2 Table 1(Post texturing strip/cell wall thickness at a pressure of 2 ± 0.01 kPa, mm)	-	0	-
6.2 Table 1(Seam peel-strength per 25 mm of cell depth, N,)	-	0	-
6.2 Table1(Seam weld hang strength for 100 mm of seam weld under constant dead weight of 72.5 kg for 7days at 54 C)	-	0	-
6.2 Table 1(Friction efficiency, percent)	-	0	-
6.2 Table 1(Standard Oxidation Induction time, min)	-	0	-
6.2 Table 1(High pressure oxidation induction time, min)	-	0	-
CL 6.1(Dimensional Stability)	-	0	-
CL 5.5(Seam weld width, mm)	-	0	-
CL 5.4(Perforation area %)	-	0	-
CL 5.3(Texture density per sq cm)	-	0	-
CL 5.2(Cell depth, Pocket size, mm)	-	0	-
CL 4.4(Resistnce to chemical retained strength %)	-	0	-
6.2 Table 1(Seam peel strength per 25 mm cell depth, N)	-	0	-
6.2 Table 1(Environmental Stress crack resistance, ESCR 5000h)	-	0	-
4.1(Material Identification)	-	0	-
1(Density- IS 13360 (part-3) sec-10)	-	0	-
1(Environmental stress crack resistance – Notched constant tensile load (ESCR - NCTL), 400 h- IS 16346)	-	0	-
1(Environmental stress crack resistance (ESCR), 5000 h - IS 17483 (part-1) Annex C)	-	0	-
1(Carbon black content- IS 2530)	-	0	-
1(cell wall thickness at a pressure of 2 ± 0.01 kPa- IS 13162 (part-3))	-	0	-
1("Seam peel-strength per 25 mm of cell depth- IS 17369 (part-1) method-B")	-	0	-
1("Seam weld hang strength for 100 mm of seam weld under constant dead weight of 72.5 kg for 7 days at 54 ± 2 °C- IS 17483 (part-1)Annex D")	-	0	-
1("Retention of breaking strength after UV exposure of 500 h- IS 17483 (part-1) Annex-E")	-	0	-
1("Friction efficiency- IS 17483 (part-1)Annex F")	-	0	-
Clause No. 5.2(Dimensions)	-	0	-
Clause No. 5.4(Perforations)	-	0	-
Clause No. 5.5(Seam Weld)	-	0	-
Clause No. 5.3(Surface density of indentation)	-	0	-
Clause No. 5.3(Asperity height)	-	0	-
Clause No. 6.2, Table No. 1 (i)(Density, g/cm3)	-	0	-
Clause No. 6.2, Table No. 1 (ii)(Environmental stress crack resistance – Notched constant tensile load (ESCR - NCTL), 400 h)	-	0	-
Clause No. 6.2, Table No. 1 (iii)(Environmental stress crack resistance (ESCR), 5000 h)	-	0	-
Clause No. 6.2, Table No. 1 (iv)(Carbon black content, percent)	-	0	-
Clause No. 6.2, Table No. 1 (v)(Post texturing strip/cell wall thickness at a pressure of 2 ± 0.01 kPa, mm)	-	0	-
Clause No. 6.2, Table No. 1 (vi)(Seam peel-strength per 25 mm of cell depth, N)	-	0	-
Clause No. 6.2, Table No. 1 (vii)(Seam weld hang strength for 100 mm of seam weld under constantdead weight of 72.5 kg for 7 days at 54 ± 2 °C)	-	0	-
Clause No. 6.2, Table No. 1 (viii)(Resistance to oxidation, Retained tensile strength, percent)	-	0	-
Clause No. 6.2, Table No. 1 (ix)(Retention of breaking strength after UV exposure of 500 h)	-	0	-
Clause No. 6.2, Table No. 1 (x)(Friction efficiency, percent)	-	0	-
Clause No. 6.2, Table No. 1 (xi)(Standard oxidative induction time, minutes)	-	0	-
Clause No. 6.2, Table No. 1 (xii)(High pressure oxidative induction time, minutes)	-	0	-
Clause No. 8(Geocells panel packaging)	-	0	-
Clause No. 9.1(Geocells labelling, shipment, storage and handling)	-	0	-
6.2 Table 1(UV resistance strength retained after 500h exposure (Percent))	-	0	-
6.2 Table 1(Resistance to oxidation Retained strength %)	-	0	-
6.2 Table 1(Density g/cc)	-	0	-
6.2 Table 1(Environmental Stress crack resistance, Notch constant tensile load (ESCR-NCTL) 400h min)	-	0	-
6.2 Table 1(Environmental Stress crack resistance, Notch constant tensile load (ESCR-NCTL) 400h min)	-	0	-
6.2 Table 1(Carbon black content, Percent)	-	0	-
6.2 Table 1(Post texturing strip/cell wall thickness at a pressure of 2 ± 0.01 kPa, mm)	-	0	-
6.2 Table 1(Seam peel-strength per 25 mm of cell depth, N,)	-	0	-
6.2 Table1(Seam weld hang strength for 100 mm of seam weld under constant dead weight of 72.5 kg for 7days at 54 C)	-	0	-
6.2 Table 1(Friction efficiency, percent)	-	0	-
6.2 Table 1(Standard Oxidation Induction time, min)	-	0	-
6.2 Table 1(High pressure oxidation induction time, min)	-	0	-
CL 6.1(Dimensional Stability)	-	0	-
CL 5.5(Seam weld width, mm)	-	0	-
CL 5.4(Perforation area %)	-	0	-
CL 5.3(Texture density per sq cm)	-	0	-
CL 5.2(Cell depth, Pocket size, mm)	-	0	-
CL 4.4(Resistnce to chemical retained strength %)	-	0	-
6.2 Table 1(Seam peel strength per 25 mm cell depth, N)	-	0	-
6.2 Table 1(Environmental Stress crack resistance, ESCR 5000h)	-	0	-
4.1(Material Identification)	-	0	-
1(Density- IS 13360 (part-3) sec-10)	-	0	-
1(Environmental stress crack resistance – Notched constant tensile load (ESCR - NCTL), 400 h- IS 16346)	-	0	-
1(Environmental stress crack resistance (ESCR), 5000 h - IS 17483 (part-1) Annex C)	-	0	-
1(Carbon black content- IS 2530)	-	0	-
1(cell wall thickness at a pressure of 2 ± 0.01 kPa- IS 13162 (part-3))	-	0	-
1("Seam peel-strength per 25 mm of cell depth- IS 17369 (part-1) method-B")	-	0	-
1("Seam weld hang strength for 100 mm of seam weld under constant dead weight of 72.5 kg for 7 days at 54 ± 2 °C- IS 17483 (part-1)Annex D")	-	0	-
1("Retention of breaking strength after UV exposure of 500 h- IS 17483 (part-1) Annex-E")	-	0	-
1("Friction efficiency- IS 17483 (part-1)Annex F")	-	0	-
Clause No. 5.2(Dimensions)	-	0	-
Clause No. 5.4(Perforations)	-	0	-
Clause No. 5.5(Seam Weld)	-	0	-
Clause No. 5.3(Surface density of indentation)	-	0	-
Clause No. 5.3(Asperity height)	-	0	-
Clause No. 6.2, Table No. 1 (i)(Density, g/cm3)	-	0	-
Clause No. 6.2, Table No. 1 (ii)(Environmental stress crack resistance – Notched constant tensile load (ESCR - NCTL), 400 h)	-	0	-
Clause No. 6.2, Table No. 1 (iii)(Environmental stress crack resistance (ESCR), 5000 h)	-	0	-
Clause No. 6.2, Table No. 1 (iv)(Carbon black content, percent)	-	0	-
Clause No. 6.2, Table No. 1 (v)(Post texturing strip/cell wall thickness at a pressure of 2 ± 0.01 kPa, mm)	-	0	-
Clause No. 6.2, Table No. 1 (vi)(Seam peel-strength per 25 mm of cell depth, N)	-	0	-
Clause No. 6.2, Table No. 1 (vii)(Seam weld hang strength for 100 mm of seam weld under constantdead weight of 72.5 kg for 7 days at 54 ± 2 °C)	-	0	-
Clause No. 6.2, Table No. 1 (viii)(Resistance to oxidation, Retained tensile strength, percent)	-	0	-
Clause No. 6.2, Table No. 1 (ix)(Retention of breaking strength after UV exposure of 500 h)	-	0	-
Clause No. 6.2, Table No. 1 (x)(Friction efficiency, percent)	-	0	-
Clause No. 6.2, Table No. 1 (xi)(Standard oxidative induction time, minutes)	-	0	-
Clause No. 6.2, Table No. 1 (xii)(High pressure oxidative induction time, minutes)	-	0	-
Clause No. 8(Geocells panel packaging)	-	0	-
Clause No. 9.1(Geocells labelling, shipment, storage and handling)	-	0	-
6.2 Table 1(UV resistance strength retained after 500h exposure (Percent))	-	0	-
6.2 Table 1(Resistance to oxidation Retained strength %)	-	0	-
6.2 Table 1(Density g/cc)	-	0	-
6.2 Table 1(Environmental Stress crack resistance, Notch constant tensile load (ESCR-NCTL) 400h min)	-	0	-
6.2 Table 1(Environmental Stress crack resistance, Notch constant tensile load (ESCR-NCTL) 400h min)	-	0	-
6.2 Table 1(Carbon black content, Percent)	-	0	-
6.2 Table 1(Post texturing strip/cell wall thickness at a pressure of 2 ± 0.01 kPa, mm)	-	0	-
6.2 Table 1(Seam peel-strength per 25 mm of cell depth, N,)	-	0	-
6.2 Table1(Seam weld hang strength for 100 mm of seam weld under constant dead weight of 72.5 kg for 7days at 54 C)	-	0	-
6.2 Table 1(Friction efficiency, percent)	-	0	-
6.2 Table 1(Standard Oxidation Induction time, min)	-	0	-
6.2 Table 1(High pressure oxidation induction time, min)	-	0	-
CL 6.1(Dimensional Stability)	-	0	-
CL 5.5(Seam weld width, mm)	-	0	-
CL 5.4(Perforation area %)	-	0	-
CL 5.3(Texture density per sq cm)	-	0	-
CL 5.2(Cell depth, Pocket size, mm)	-	0	-
CL 4.4(Resistnce to chemical retained strength %)	-	0	-
6.2 Table 1(Seam peel strength per 25 mm cell depth, N)	-	0	-
6.2 Table 1(Environmental Stress crack resistance, ESCR 5000h)	-	0	-
4.1(Material Identification)	-	0	-
1(Density- IS 13360 (part-3) sec-10)	-	0	`
1(Environmental stress crack resistance – Notched constant tensile load (ESCR - NCTL), 400 h- IS 16346)	-	0	-
1(Environmental stress crack resistance (ESCR), 5000 h - IS 17483 (part-1) Annex C)	-	0	-
1(Carbon black content- IS 2530)	-	0	-
1(cell wall thickness at a pressure of 2 ± 0.01 kPa- IS 13162 (part-3))	-	0	-
1("Seam peel-strength per 25 mm of cell depth- IS 17369 (part-1) method-B")	-	0	-
1("Seam weld hang strength for 100 mm of seam weld under constant dead weight of 72.5 kg for 7 days at 54 ± 2 °C- IS 17483 (part-1)Annex D")	-	0	-
1("Retention of breaking strength after UV exposure of 500 h- IS 17483 (part-1) Annex-E")	-	0	-
1("Friction efficiency- IS 17483 (part-1)Annex F")	-	0	-
Clause No. 5.2(Dimensions)	-	0	-
Clause No. 5.4(Perforations)	-	0	-
Clause No. 5.5(Seam Weld)	-	0	-
Clause No. 5.3(Surface density of indentation)	-	0	-
Clause No. 5.3(Asperity height)	-	0	-
Clause No. 6.2, Table No. 1 (i)(Density, g/cm3)	-	0	-
Clause No. 6.2, Table No. 1 (ii)(Environmental stress crack resistance – Notched constant tensile load (ESCR - NCTL), 400 h)	-	0	-
Clause No. 6.2, Table No. 1 (iii)(Environmental stress crack resistance (ESCR), 5000 h)	-	0	-
Clause No. 6.2, Table No. 1 (iv)(Carbon black content, percent)	-	0	-
Clause No. 6.2, Table No. 1 (v)(Post texturing strip/cell wall thickness at a pressure of 2 ± 0.01 kPa, mm)	-	0	-
Clause No. 6.2, Table No. 1 (vi)(Seam peel-strength per 25 mm of cell depth, N)	-	0	-
Clause No. 6.2, Table No. 1 (vii)(Seam weld hang strength for 100 mm of seam weld under constantdead weight of 72.5 kg for 7 days at 54 ± 2 °C)	-	0	-
Clause No. 6.2, Table No. 1 (viii)(Resistance to oxidation, Retained tensile strength, percent)	-	0	-
Clause No. 6.2, Table No. 1 (ix)(Retention of breaking strength after UV exposure of 500 h)	-	0	-
Clause No. 6.2, Table No. 1 (x)(Friction efficiency, percent)	-	0	-
Clause No. 6.2, Table No. 1 (xi)(Standard oxidative induction time, minutes)	-	0	-
Clause No. 6.2, Table No. 1 (xii)(High pressure oxidative induction time, minutes)	-	0	-
Clause No. 8(Geocells panel packaging)	-	0	-
Clause No. 9.1(Geocells labelling, shipment, storage and handling)	-	0	-
6.2 Table 1(UV resistance strength retained after 500h exposure (Percent))	-	0	-
6.2 Table 1(Resistance to oxidation Retained strength %)	-	0	-
6.2 Table 1(Density g/cc)	-	0	-
6.2 Table 1(Environmental Stress crack resistance, Notch constant tensile load (ESCR-NCTL) 400h min)	-	0	-
6.2 Table 1(Environmental Stress crack resistance, Notch constant tensile load (ESCR-NCTL) 400h min)	-	0	-
6.2 Table 1(Carbon black content, Percent)	-	0	-
6.2 Table 1(Post texturing strip/cell wall thickness at a pressure of 2 ± 0.01 kPa, mm)	-	0	-
6.2 Table 1(Seam peel-strength per 25 mm of cell depth, N,)	-	0	-
6.2 Table1(Seam weld hang strength for 100 mm of seam weld under constant dead weight of 72.5 kg for 7days at 54 C)	-	0	-
6.2 Table 1(Friction efficiency, percent)	-	0	-
6.2 Table 1(Standard Oxidation Induction time, min)	-	0	-
6.2 Table 1(High pressure oxidation induction time, min)	-	0	-
CL 6.1(Dimensional Stability)	-	0	-
CL 5.5(Seam weld width, mm)	-	0	-
CL 5.4(Perforation area %)	-	0	-
CL 5.3(Texture density per sq cm)	-	0	-
CL 5.2(Cell depth, Pocket size, mm)	-	0	-
CL 4.4(Resistnce to chemical retained strength %)	-	0	-
6.2 Table 1(Seam peel strength per 25 mm cell depth, N)	-	0	-
6.2 Table 1(Environmental Stress crack resistance, ESCR 5000h)	-	0	-
4.1(Material Identification)	-	0	-

-
Included w.e.f.23.07.2025 Exclusion Clause No. 6.2, Table No. 1 (xii) (High pressure oxidative induction time, minutes) Clause No. 6.2, Table No. 1 (xii) (High pressure oxidative induction time, minutes)

5175

BIS, Bengaluru Branch Laboratory (BNBL)

None

IS 398 : Part 6 (2021)

Aluminium Conductors For Overhead Transmission Purposes Part 6: High conductivity aluminium alloy stranded conductors

High Conductivity Aluminium Alloy Stranded Conductors

- View breakup
For stranded conductors with 7 strands - Rs 4200 For stranded conductors with 19 strands - 22 hrs Rs 6600 For stranded conductors with 37 strands- 30 hrs Rs 9000 For stranded conductors with 61 strands- 50 hrs Rs 15000

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
16.2 (Visual Examination)	-
16.3, Table 4 (Measurement of Lay Ratio / Direction of Lay)	-
16.3, Table 4 (Measurement of Lay Ratio / Direction of Lay)	-
16.3, Table 4 (Measurement of Lay Ratio / Direction of Lay)	-
16.3, Table 4 (Measurement of Lay Ratio / Direction of Lay)	-
16.4, Table 2 (Measurement of Diameter of Individual Aluminium Alloy Wires)	-
16.5, Table 2 (Breaking Load Test - before stranding)	-
16.5, Table 2 (Breaking Load Test - after stranding)	-
16.6, Table 1 (Elongation Test - before stranding)	-
16.6, Table 1 (Elongation Test - after stranding)	-
16.7, Table 2 (Resistivity Test)	-
16.8 (Wrapping Test)	-
11 (Stranding)	-
8 (Freedom from defects)	-

-
-

5176

DELHI TEST HOUSE (65) KUNDLI-2 SONIPAT

9138006

IS 17293 (2020)

Electric Cables for Photovoltaic Systems for Rated Voltage 1 500 V d.c.

1050000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 7.3, Table 1 to 5 of IS 8130:2013 & IS:10810 (Part 5)-1984(Conductor Resistance Test)	-	1500	Except long duration tests
Cl. 7.1.2 of IS 8130 : 2013 & IS:10810 (Part 1)-1984(Annealing Test (for copper))	-	2500	Except long duration tests
Cl. 7.1.1 of IS 8130:2013 & IS:10810 (Part 4)-1984(Persulphate Test for tinned copper)	-	2500	Except long duration tests
Annex G and Table 3 of IS 17293:2020(Ozone Resistance test)	-	14500	Except long duration tests
IS 191 : 2007, IS 440(Copper purity test)	-	5000	Except long duration tests
Table 3 of IS 17293:2020 & IS 10810 (Part 63)(Smoke density test.)	-	5000	Except long duration tests
Cl 6.4.3 and Table 3 of IS 8130(Diameter of wire in conductor)	-	1500	Except long duration tests
Table-3 & Annex-F of IS 17293:2020 and IS 10810 (Part 7) 1984(Elongation at low temperature (Cold Elongation))	-	12500	Except long duration tests
Annex H and Table 3 of IS 17293:2020(Damp Heat test)	-	125000	Except long duration tests
Cl. 5.3, 6.3 & Table 1 & 2 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	2500	Except long duration tests
Annex A of IS 17293-2020, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	10000	Except long duration tests
Cl 11.2.3 & Table-3 of IS 17293:2020 & IS:10810 (Part 43)-1984(Insulation Resistance)	-	5000	Except long duration tests
Annex B of IS 17293:2020 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	10000	Except long duration tests
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(pH)	-	2000	Except long duration tests
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(IS 17293)	-	32500	Except long duration tests
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(HCl and HBr)	-	32500	Except long duration tests
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Presence of Fluorine / Fluorine Content (if required))	-	32500	Except long duration tests
Annex B of IS 17293:2020 & IS:10810 (Part 30)-1984(IS 10810-30)	-	1500	Except long duration tests
"Annex B of IS 17293:2020 & IS:8504-1:2012 and IS: 8504-2: 2013"(Thermal endurance test)	-	350000	Except long duration tests
Annex D and Table 3 of IS 17293:2020(Dynamic Penetration test)	-	15000	Except long duration tests
Annex- I, Annex-B, Table-11 of IS 17293:2020 and IS 10810 (Part 1) : 1984(Sheath resistance against acid and alkaline solution)	-	3500	Except long duration tests
Annex C of IS 17293:2020 & IS:10810 (Part 21)-1984(Cold impact test)	-	5000	Except long duration tests
Annex - B of IS 17293:2020(Compatibility test)	-	500	Except long duration tests
Table 3 of IS 17293:2020 & IS:10810 (Part 20)-1984(Cold bend test)	-	5000	Except long duration tests
Cl. 5.3, 6.3 & Table 1 & 2 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	2500	Except long duration tests
Cl 5.3 of IS 17048:2018 & IS:10810 (Part 53)-1984(Flammability Test)	-	6500	Except long duration tests
Annex A of IS 17293-2020, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	10000	Except long duration tests
Cl 11.2.1 of IS 17293:2020 & IS:10810 (Part 45)-1984(High voltage test)	-	5000	Except long duration tests
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Presence of Fluorine / Fluorine Content (if required))	-	15000	Except long duration tests
Annex B of IS 17293:2020 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	10000	Except long duration tests
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(pH)	-	32500	Except long duration tests
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Conductivity)	-	32500	Except long duration tests
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(HCl and HBr)	-	32500	Except long duration tests
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Presence of Fluorine / Fluorine Content (if required))	-	32500	Except long duration tests
Annex B of IS 17293:2020 & IS:10810 (Part 30)-1984(Hot set test)	-	15000	Except long duration tests
"Annex B of IS 17293:2020 & IS:8504-1:2012 and IS: 8504-2: 2013"(Thermal endurance test)	-	350000	Except long duration tests
Annex- I, Annex-B, Table-11 of IS 17293:2020 and IS 10810 (Part 1) : 1984(Sheath resistance against acid and alkaline solution)	-	2500	Except long duration tests
Annex - B of IS 17293:2020(Compatibility test)	-	2500	Except long duration tests
Table 3 of IS 17293:2020 & IS:10810 (Part 12)-1984(Shrinkage test)	-	7500	Except long duration tests
Annex - E of IS 17293 : 2020(UV resistance)	-	95000	Except long duration tests
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(pH)	-	5000	Except long duration tests
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Conductivity)	-	5000	Except long duration tests
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(HCl and HBr)	-	17500	Except long duration tests
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Presence of Fluorine / Fluorine Content (if required))	-	17500	Except long duration tests
11.2.2(Spark Test)	-	2500	Except long duration tests
11.2.4(Long-term Resistance of Insulation to d.c.)	-	30000	Except long duration tests
11.2.5(Surface Resistance of Sheath)	-	2500	Except long duration tests
11.3.1(Sheath Colour)	-	500	Except long duration tests
11.3.2(Sheath Marking)	-	800	Except long duration tests
11.3.3(Overall Diameters and Ovality)	-	1500	Except long duration tests
Annex J(Assessment of Halogens)	-	32500	Except long duration tests
5.1, 6.1, Table 11, 1.1(Properties before ageing b)	-	2500	Except long duration tests
5.1, 6.1, Table 11, 1.2(Properties after ageing in oven)	-	7500	Except long duration tests
5.1, 6.1, Table 11, 1.3(Hot set test b)	-	7500	Except long duration tests
5.1, 6.1, Table 11, 1.4(Thermal endurance Test conditions b)	-	350000	Except long duration tests
5.1, 6.1, Table 11, 1.5(Bending at low temperature)	-	13500	Except long duration tests
5.1, 6.1, Table 11, 1.6(Elongation at low temperature Insulated conductor/cable overall diameter)	-	13500	Except long duration tests
5.1, 6.1, Table 11, 1.7(Sheath resistance against acid and alkaline solution)	-	3500	Except long duration tests
5.1, 6.1, Table 11, 1.8(Compatibility test)	-	2500	Except long duration tests
5.2(Application to the Conductor)	-	1200	Except long duration tests
5.3(Thickness)	-	1500	Except long duration tests
6.2(Sheath application)	-	500	Except long duration tests
6.3(Sheath Thickness)	-	1500	Except long duration tests
6.4(Sheath Colour)	-	500	Except long duration tests
7(Overall Dimension)	-	1500	Except long duration tests
8.1(Continuity of Marking)	-	750	Except long duration tests
8.2(Durability)	-	500	Except long duration tests
8.3(Legibility)	-	500	Except long duration tests
9(Core Identification)	-	500	Except long duration tests
12(Packing and Marking)	-	750	Except long duration tests
4.1(Resistance)	-	500	Except long duration tests
7.1.2.1, 7.2.3(Annealing)	-	2500	Except long duration tests
Table 3, (IS 10810 Part 53)(Test for vertical flame propagation on complete cable)	-	10500	Except long duration tests
Cl. 7.3, Table 1 to 5 of IS 8130:2013 & IS:10810 (Part 5)-1984(Conductor Resistance Test)	-	1500	Except long duration tests
Cl. 7.1.2 of IS 8130 : 2013 & IS:10810 (Part 1)-1984(Annealing Test (for copper))	-	2500	Except long duration tests
Cl. 7.1.1 of IS 8130:2013 & IS:10810 (Part 4)-1984(Persulphate Test for tinned copper)	-	2500	Except long duration tests
Annex G and Table 3 of IS 17293:2020(Ozone Resistance test)	-	14500	Except long duration tests
IS 191 : 2007, IS 440(Copper purity test)	-	5000	Except long duration tests
Table 3 of IS 17293:2020 & IS 10810 (Part 63)(Smoke density test.)	-	5000	Except long duration tests
Cl 6.4.3 and Table 3 of IS 8130(Diameter of wire in conductor)	-	1500	Except long duration tests
Table-3 & Annex-F of IS 17293:2020 and IS 10810 (Part 7) 1984(Elongation at low temperature (Cold Elongation))	-	12500	Except long duration tests
Annex H and Table 3 of IS 17293:2020(Damp Heat test)	-	125000	Except long duration tests
Cl. 5.3, 6.3 & Table 1 & 2 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	2500	Except long duration tests
Annex A of IS 17293-2020, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	10000	Except long duration tests
Cl 11.2.3 & Table-3 of IS 17293:2020 & IS:10810 (Part 43)-1984(Insulation Resistance)	-	5000	Except long duration tests
Annex B of IS 17293:2020 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	10000	Except long duration tests
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(pH)	-	2000	Except long duration tests
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(IS 17293)	-	32500	Except long duration tests
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(HCl and HBr)	-	32500	Except long duration tests
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Presence of Fluorine / Fluorine Content (if required))	-	32500	Except long duration tests
Annex B of IS 17293:2020 & IS:10810 (Part 30)-1984(IS 10810-30)	-	1500	Except long duration tests
"Annex B of IS 17293:2020 & IS:8504-1:2012 and IS: 8504-2: 2013"(Thermal endurance test)	-	350000	Except long duration tests
Annex D and Table 3 of IS 17293:2020(Dynamic Penetration test)	-	15000	Except long duration tests
Annex- I, Annex-B, Table-11 of IS 17293:2020 and IS 10810 (Part 1) : 1984(Sheath resistance against acid and alkaline solution)	-	3500	Except long duration tests
Annex C of IS 17293:2020 & IS:10810 (Part 21)-1984(Cold impact test)	-	5000	Except long duration tests
Annex - B of IS 17293:2020(Compatibility test)	-	500	Except long duration tests
Table 3 of IS 17293:2020 & IS:10810 (Part 20)-1984(Cold bend test)	-	5000	Except long duration tests
Cl. 5.3, 6.3 & Table 1 & 2 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	2500	Except long duration tests
Cl 5.3 of IS 17048:2018 & IS:10810 (Part 53)-1984(Flammability Test)	-	6500	Except long duration tests
Annex A of IS 17293-2020, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	10000	Except long duration tests
Cl 11.2.1 of IS 17293:2020 & IS:10810 (Part 45)-1984(High voltage test)	-	5000	Except long duration tests
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Presence of Fluorine / Fluorine Content (if required))	-	15000	Except long duration tests
Annex B of IS 17293:2020 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	10000	Except long duration tests
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(pH)	-	32500	Except long duration tests
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Conductivity)	-	32500	Except long duration tests
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(HCl and HBr)	-	32500	Except long duration tests
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Presence of Fluorine / Fluorine Content (if required))	-	32500	Except long duration tests
Annex B of IS 17293:2020 & IS:10810 (Part 30)-1984(Hot set test)	-	15000	Except long duration tests
"Annex B of IS 17293:2020 & IS:8504-1:2012 and IS: 8504-2: 2013"(Thermal endurance test)	-	350000	Except long duration tests
Annex- I, Annex-B, Table-11 of IS 17293:2020 and IS 10810 (Part 1) : 1984(Sheath resistance against acid and alkaline solution)	-	2500	Except long duration tests
Annex - B of IS 17293:2020(Compatibility test)	-	2500	Except long duration tests
Table 3 of IS 17293:2020 & IS:10810 (Part 12)-1984(Shrinkage test)	-	7500	Except long duration tests
Annex - E of IS 17293 : 2020(UV resistance)	-	95000	Except long duration tests
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(pH)	-	5000	Except long duration tests
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Conductivity)	-	5000	Except long duration tests
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(HCl and HBr)	-	17500	Except long duration tests
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Presence of Fluorine / Fluorine Content (if required))	-	17500	Except long duration tests
11.2.2(Spark Test)	-	2500	Except long duration tests
11.2.4(Long-term Resistance of Insulation to d.c.)	-	30000	Except long duration tests
11.2.5(Surface Resistance of Sheath)	-	2500	Except long duration tests
11.3.1(Sheath Colour)	-	500	Except long duration tests
11.3.2(Sheath Marking)	-	800	Except long duration tests
11.3.3(Overall Diameters and Ovality)	-	1500	Except long duration tests
Annex J(Assessment of Halogens)	-	32500	Except long duration tests
5.1, 6.1, Table 11, 1.1(Properties before ageing b)	-	2500	Except long duration tests
5.1, 6.1, Table 11, 1.2(Properties after ageing in oven)	-	7500	Except long duration tests
5.1, 6.1, Table 11, 1.3(Hot set test b)	-	7500	Except long duration tests
5.1, 6.1, Table 11, 1.4(Thermal endurance Test conditions b)	-	350000	Except long duration tests
5.1, 6.1, Table 11, 1.5(Bending at low temperature)	-	13500	Except long duration tests
5.1, 6.1, Table 11, 1.6(Elongation at low temperature Insulated conductor/cable overall diameter)	-	13500	Except long duration tests
5.1, 6.1, Table 11, 1.7(Sheath resistance against acid and alkaline solution)	-	3500	Except long duration tests
5.1, 6.1, Table 11, 1.8(Compatibility test)	-	2500	Except long duration tests
5.2(Application to the Conductor)	-	1200	Except long duration tests
5.3(Thickness)	-	1500	Except long duration tests
6.2(Sheath application)	-	500	Except long duration tests
6.3(Sheath Thickness)	-	1500	Except long duration tests
6.4(Sheath Colour)	-	500	Except long duration tests
7(Overall Dimension)	-	1500	Except long duration tests
8.1(Continuity of Marking)	-	750	Except long duration tests
8.2(Durability)	-	500	Except long duration tests
8.3(Legibility)	-	500	Except long duration tests
9(Core Identification)	-	500	Except long duration tests
12(Packing and Marking)	-	750	Except long duration tests
4.1(Resistance)	-	500	Except long duration tests
7.1.2.1, 7.2.3(Annealing)	-	2500	Except long duration tests
Table 3, (IS 10810 Part 53)(Test for vertical flame propagation on complete cable)	-	10500	Except long duration tests

31 Dec, 2026

-
Included w.e.f.02.06.2025

5177

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 1170 (1992)

Ferrochromium - Specification (Second Revision)

15800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.2 ; 8.2.1 ; 8.2.2 ; 8.3 ; 8.4 ; Table 1(Chemical Composition ; IS 1559 or any other established instrumental/chemical method ; latest version of IS 1559 shall be the referee method )	-	15800	For complete testing
8.5(Residual elements)	-	15800	For complete testing
9.5(Manganese)	-	15800	For complete testing
10.5(Nickle)	-	15800	For complete testing
11.5(Vanadium)	-	15800	For complete testing
12.5(Copper)	-	15800	For complete testing
13.5(Molybdenum)	-	15800	For complete testing
14.5(Columbium)	-	15800	For complete testing
15.5(Tantalum)	-	15800	For complete testing
16.5(Cobalt)	-	15800	For complete testing
17.5(Aluminium)	-	15800	For complete testing
18.5(Titanium)	-	15800	For complete testing
19.5(Zirconium)	-	15800	For complete testing
20.5(Arsenic)	-	15800	For complete testing
21.5(Lead)	-	15800	For complete testing
22.5(Tin)	-	15800	For complete testing
23.5(Zinc)	-	15800	For complete testing
24.5(Boron)	-	15800	For complete testing
25.5(Antimony)	-	15800	For complete testing
26.5(Silver)	-	15800	For complete testing
27.5(Bismuth)	-	15800	For complete testing
9 , Table 2(Size Range)	-	15800	For complete testing
10(Extraneous contamination)	-	15800	For complete testing
8.2 ; 8.2.1 ; 8.2.2 ; 8.3 ; 8.4 ; Table 1(Chemical Composition ; IS 1559 or any other established instrumental/chemical method ; latest version of IS 1559 shall be the referee method )	-	15800	For complete testing
8.5(Residual elements)	-	15800	For complete testing
9.5(Manganese)	-	15800	For complete testing
10.5(Nickle)	-	15800	For complete testing
11.5(Vanadium)	-	15800	For complete testing
12.5(Copper)	-	15800	For complete testing
13.5(Molybdenum)	-	15800	For complete testing
14.5(Columbium)	-	15800	For complete testing
15.5(Tantalum)	-	15800	For complete testing
16.5(Cobalt)	-	15800	For complete testing
17.5(Aluminium)	-	15800	For complete testing
18.5(Titanium)	-	15800	For complete testing
19.5(Zirconium)	-	15800	For complete testing
20.5(Arsenic)	-	15800	For complete testing
21.5(Lead)	-	15800	For complete testing
22.5(Tin)	-	15800	For complete testing
23.5(Zinc)	-	15800	For complete testing
24.5(Boron)	-	15800	For complete testing
25.5(Antimony)	-	15800	For complete testing
26.5(Silver)	-	15800	For complete testing
27.5(Bismuth)	-	15800	For complete testing
9 , Table 2(Size Range)	-	15800	For complete testing
10(Extraneous contamination)	-	15800	For complete testing
Table 1 (Cl 5 and 8.2.1)(Chromium)	-	15800	For complete testing
Table 1 (Cl 5 and 8.2.1)(Copper)	-	15800	For complete testing
Table 1 (Cl 5 and 8.2.1)(Si)	-	15800	For complete testing
Table 1 (Cl 5 and 8.2.1)(Nitrogen)	-	15800	For complete testing
Table 1 (Cl 5 and 8.2.1)(Sulphur)	-	15800	For complete testing
Table 1 (Cl 5 and 8.2.1)(Aluminium)	-	15800	For complete testing
Table 1 (Cl 5 and 8.2.1)(Phosphorus)	-	15800	For complete testing

-
Included w.e.f.10.07.2025

5178

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 1110 (2023)

FERROSILICON -- SPECIFICATIONS

14800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1(Constitution of Consignment)	-	14800	For complete testing
Clauses 4 and 7.2.1-Table 1(Silicon)	-	14800	For complete testing
Clauses 4 and 7.2.1-Table 1(Carbon)	-	14800	For complete testing
Clauses 4 and 7.2.1-Table 1(Sulphur)	-	14800	For complete testing
Clauses 4 and 7.2.1-Table 1(Phosphorus)	-	14800	For complete testing
Clauses 4 and 7.2.1-Table 1(Aluminium)	-	14800	For complete testing
Clauses 4 and 7.2.1-Table 1(Calcium)	-	14800	For complete testing
Clauses 4 and 7.2.1-Table 1(Manganese)	-	14800	For complete testing
Clauses 4 and 7.2.1-Table 1(Manganese)	-	14800	For complete testing
Clauses 4 and 7.2.1-Table 1(Manganese)	-	14800	For complete testing
Clauses 4 and 7.2.1-Table 1(Boron)	-	14800	For complete testing
Clauses 4 and 7.2.1-Table 1(Zirconium)	-	14800	For complete testing
Clauses 4 and 7.2.1-Table 1(Titanium)	-	14800	For complete testing
8(SIZE)	-	14800	For complete testing
9(Extraneous contamination)	-	14800	For complete testing
7.1(Constitution of Consignment)	-	-	-
Clauses 4 and 7.2.1-Table 1(Silicon)	-	-	-
Clauses 4 and 7.2.1-Table 1(Carbon)	-	-	-
Clauses 4 and 7.2.1-Table 1(Sulphur)	-	-	-
Clauses 4 and 7.2.1-Table 1(Phosphorus)	-	-	-
Clauses 4 and 7.2.1-Table 1(Aluminium)	-	-	-
Clauses 4 and 7.2.1-Table 1(Calcium)	-	-	-
Clauses 4 and 7.2.1-Table 1(Manganese)	-	-	-
Clauses 4 and 7.2.1-Table 1(Manganese)	-	-	-
Clauses 4 and 7.2.1-Table 1(Manganese)	-	-	-
Clauses 4 and 7.2.1-Table 1(Boron)	-	-	-
Clauses 4 and 7.2.1-Table 1(Zirconium)	-	-	-
Clauses 4 and 7.2.1-Table 1(Titanium)	-	-	-
8(SIZE)	-	-	-
9(Extraneous contamination)	-	-	-

-
Included w.e.f.10.07.2025

5179

KRISHNA DIGITAL MATERIAL TESTING LABORATORY LLP, BHOPAL

8168706

IS 4984 (2016)

Polyethylene pipes for water supply - Specification (Fifth Revision)

PE 63 ,80,100 , size DIN 16 mm to 315 mm

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.10(Slow Crack Growth Rate)	-	2000	-
8.9 table-6(Elongation at Break)	-	500	-
8.8(Tensile Strength for Butt-fusion)	-	1000	-
8.7(Density)	-	500	-
8.4( Melt Flow Rate)	-	1000	-
8.2(Longitudinal Reversion Test)	-	1000	-
8.1.2 table -5(Internal Pressure Creep Rupture Test of Pipe Joints)	-	2000	-
8,/8.1/8.1.1 table-5(PERFORMANCE REQUIREMENTS / Hydraulic Characteristics/ Internal Pressure Creep Rupture Test of Pipe)	-	9500	-
Cl-7.4(Mean Outside Diameter (For upto 50 mm take 8 reading, above 50mm take 6 reading & average will be reported))	-	200	-
7.2(Length)	-	200	-
6.2.1(6.1.1 Identification Stripes)	-	200	-
6.2(Colour)	-	100	-
8.6(Overall migration)	-	2200	-
Clause 8.3(Carbon Black Dispersion)	-	500	-
Clause 7.1(Visual Apperance)	-	100	-
Clause 8.3(Carbon Black content)	-	1500	-
6.1.4(PIPE DESCRIPTION)	-	0	-
6.1.3 (PIPE DESCRIPTION)	-	0	-
6, 6.1.1(PIPE DESCRIPTION)	-	0	-
5.3(e)(Carbon Black Master Batch)	-	0	-
5.3(d)(Carbon Black Master Batch)	-	0	-
5.2(Polyethylene Resin)	-	0	-
5.3 (a)(Carbon Black Master Batch)	-	0	-
5.3(c)(Carbon Black Master Batch)	-	0	-
8.10(Slow Crack Growth Rate)	-	0	-
Clause 8.3(Carbon Black Dispersion)	-	0	-
Clause 7.1(Visual Apperance)	-	0	-
Clause 8.3(Carbon Black content)	-	0	-
8.5 (Oxidation Induction Time)	-	2500	-
8.10(Slow Crack Growth Rate)	-	0	-
Clause 8.3(Carbon Black Dispersion)	-	0	-
Clause 7.1(Visual Apperance)	-	0	-
Clause 8.3(Carbon Black content)	-	0	-

19 Aug, 2027

-
Included w.e.f 16.07.2025 Exclusion: Cl 5.2 (Volatile matter Content), Cl 5.3 (Toluene Extract), Cl 5.4 (Anti oxydent)

5180

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 7902 (2001)

Aluminium alloy forging stock and forgings (Alloy 24345) for aerospace applications - Specification (First Revision)

19800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(MANUFACTURE)	-	1800	For complete dimensional and other qualitative test
6(FREEDOM FROM DEFECTS)	-	1800	For complete dimensional and other qualitative test
7 table 1(CHEMICAL COMPOSITION)	-	6500	For complete chemical testing
8.1(Forging Stocks)	-	1800	For complete dimensional and other qualitative test
8.2(Forgings)	-	1800	For complete dimensional and other qualitative test
9(HEAT TREATMENT)	-	1800	For complete dimensional and other qualitative test
10.1(Tensile Test)	-	6500	For complete mechanical testing
10.2(Hardness)	-	6500	For complete mechanical testing
11(DIMENSIONS AND TOLERANCES)	-	1800	For complete dimensional and other qualitative test
12.1(Inspection and Testing)	-	1800	For complete dimensional and other qualitative test
12.2.1(Ultrasonic test)	-	2500	For ultrasonic and dye penetrant test
12.2.1(Dye Penetrant Test)	-	2500	For ultrasonic and dye penetrant test
12.2.2(Macro and Micro-Examination)	-	2500	For macro and micro examination test
13(RETEST)	-	1800	For complete dimensional and other qualitative test
Cl.7(Copper - IS 504 and its parts or any other intrumental/chemical methods)	-	6500	For complete chemical testing
Cl.7(Magnesium - IS 504 and its parts or any other intrumental/chemical methods)	-	6500	For complete chemical testing
Cl.7(Manganese - IS 504 and its parts or any other intrumental/chemical methods)	-	6500	For complete chemical testing
Cl.7(Titanium - IS 504 and its parts or any other intrumental/chemical methods)	-	6500	For complete chemical testing
Cl.7(Titanium+Zirconium - IS 504 and its parts or any other intrumental/chemical methods)	-	6500	For complete chemical testing
Cl.7(Iron - IS 504 and its parts or any other intrumental/chemical methods)	-	6500	For complete chemical testing
Cl.7(Zinc - IS 504 and its parts or any other intrumental/chemical methods)	-	6500	For complete chemical testing
Cl.7(Tin - IS 504 and its parts or any other intrumental/chemical methods)	-	6500	For complete chemical testing
Cl.7(Chromium - IS 504 and its parts or any other intrumental/chemical methods)	-	6500	For complete chemical testing
Cl.7(Nickel - IS 504 and its parts or any other intrumental/chemical methods)	-	6500	For complete chemical testing
Cl.7(Lead - IS 504 and its parts or any other intrumental/chemical methods)	-	6500	For complete chemical testing
Cl.7(Copper - IS 504 and its parts or any other intrumental/chemical methods)	-	6500	For complete chemical testing
Cl.7(Magnesium - IS 504 and its parts or any other intrumental/chemical methods)	-	6500	For complete chemical testing
Cl.7(Silicon - IS 504 and its parts or any other intrumental/chemical methods)	-	6500	For complete chemical testing
Cl.7(Manganese - IS 504 and its parts or any other intrumental/chemical methods)	-	6500	For complete chemical testing
Cl.7(Titanium - IS 504 and its parts or any other intrumental/chemical methods)	-	6500	For complete chemical testing
Cl.7(Titanium+Zirconium - IS 504 and its parts or any other intrumental/chemical methods)	-	6500	For complete chemical testing
Cl.7(Iron - IS 504 and its parts or any other intrumental/chemical methods)	-	6500	For complete chemical testing
Cl.7(Zinc - IS 504 and its parts or any other intrumental/chemical methods)	-	6500	For complete chemical testing
Cl.7(Tin - IS 504 and its parts or any other intrumental/chemical methods)	-	6500	For complete chemical testing
Cl.7(Chromium - IS 504 and its parts or any other intrumental/chemical methods)	-	6500	For complete chemical testing
Cl.7(Nickel - IS 504 and its parts or any other intrumental/chemical methods)	-	6500	For complete chemical testing
Cl.7(Nickel - IS 504 and its parts or any other intrumental/chemical methods)	-	6500	For complete chemical testing
6(Freedom from defect)	-	1800	For complete dimensional and other qualitative test
10.1(Tensile strength)	-	6500	For complete mechanical testing
10.1(0.2 % proof stress)	-	6500	For complete mechanical testing
10.1(Elongation)	-	6500	For complete mechanical testing
10.2(Hardness Test)	-	6500	For complete mechanical testing
11(Dimensions and Tolerance)	-	1800	For complete dimensional and other qualitative test
6(Freedom from defect)	-	1800	For complete dimensional and other qualitative test
10.1(Tensile strength)	-	6500	For complete mechanical testing
10.1(0.2 % proof stress)	-	6500	For complete mechanical testing
10.1(Elongation)	-	6500	For complete mechanical testing
10.2(Hardness Test)	-	6500	For complete mechanical testing
11(DIMENSIONS AND TOLEF&WtCES)	-	1800	For complete dimensional and other qualitative test
5(MANUFACTURE)	-	0	-
6(FREEDOM FROM DEFECTS)	-	0	-
7 table 1(CHEMICAL COMPOSITION)	-	0	-
8.1(Forging Stocks)	-	0	-
8.2(Forgings)	-	0	-
9(HEAT TREATMENT)	-	0	-
10.1(Tensile Test)	-	0	-
10.2(Hardness)	-	0	-
11(DIMENSIONS AND TOLERANCES)	-	0	-
12.1(Inspection and Testing)	-	0	-
12.2.1(Ultrasonic test)	-	0	-
12.2.1(Dye Penetrant Test)	-	0	-
12.2.2(Macro and Micro-Examination)	-	0	-
13(RETEST)	-	0	-
Cl.7(Copper - IS 504 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.7(Magnesium - IS 504 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.7(Manganese - IS 504 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.7(Titanium - IS 504 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.7(Titanium+Zirconium - IS 504 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.7(Iron - IS 504 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.7(Zinc - IS 504 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.7(Tin - IS 504 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.7(Chromium - IS 504 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.7(Nickel - IS 504 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.7(Lead - IS 504 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.7(Copper - IS 504 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.7(Magnesium - IS 504 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.7(Silicon - IS 504 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.7(Manganese - IS 504 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.7(Titanium - IS 504 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.7(Titanium+Zirconium - IS 504 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.7(Iron - IS 504 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.7(Zinc - IS 504 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.7(Tin - IS 504 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.7(Chromium - IS 504 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.7(Nickel - IS 504 and its parts or any other intrumental/chemical methods)	-	0	-
Cl.7(Nickel - IS 504 and its parts or any other intrumental/chemical methods)	-	0	-
6(Freedom from defect)	-	0	-
10.1(Tensile strength)	-	0	-
10.1(0.2 % proof stress)	-	0	-
10.1(Elongation)	-	0	-
10.2(Hardness Test)	-	0	-
11(Dimensions and Tolerance)	-	0	-
6(Freedom from defect)	-	0	-
10.1(Tensile strength)	-	0	-
10.1(0.2 % proof stress)	-	0	-
10.1(Elongation)	-	0	-
10.2(Hardness Test)	-	0	-
11(DIMENSIONS AND TOLEF&WtCES)	-	0	-

-
Included w.e.f 19.06.2025

5181

Testtex India Laboratories Pvt. Ltd., Mumbai

7126506

IS 17508 (2020)

Disposable Adult Incontinence Diaper - Specification

17500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause no. 3(Material)	-	0	Complete testing charges - Rs. 17,500 + GST ; Except Clause no 7.4 Biocompatibility Evaluation- Cytotoxicity, Irritation and Skin Sensitization, Clause no 7.5 Biodegradability and Compostability
Clause no. 3.1(Top Cover / Top Sheet)	-	500	Cl 7.6- Anti Bacterial Activity Value (Optional Test)- Rs 4000 + GST (10% Discount to BIS for Complete Testing)
Clause no. 3.2(Absorbent Core)	-	500	-
Clause no. 3.3(Outer Protective Barrier or Back Sheet)	-	500	-
Clause no. 4(Fastening & Securing Mechanism)	-	500	-
Clause no. 5(Manufacture, Workmanship and Finish)	-	500	-
Clause no.6(Type and Size: FOR X LARGE)	-	500	Combines charges for clause no. 6
Clause no.6(Diaper Length)	-	500	Combines charges for clause no. 6
Clause no.6(Diaper Width)	-	500	Combines charges for clause no. 6
Clause no.6(Diaper Crotch)	-	500	Combines charges for clause no. 6
Clause no.6(Absorbent Core Length)	-	500	Combines charges for clause no. 6
Clause no.6(Absorbent Core Width Back)	-	500	Combines charges for clause no. 6
Clause no.6(Absorbent Core Width Front)	-	500	Combines charges for clause no. 6
Clause no.6(Core Crotch Width)	-	500	Combines charges for clause no. 6
Clause no.7.1(pH Value)	-	500	Testing charges for clause no 7 and sub clause no 7.1 pH Value is 500
Clause no.7.2 Table-2(Rate of Absorption (All Sizes))	-	500	-
Clause no.7.2 Table-2(Rewet under Load (All Sizes))	-	1000	-
Clause no.7.2 Table-2(Minimum Absorption Capacity (ml))	-	1000	-
Clause no.7.3(Hygiene Testing Requirement, Total Viable Count)	-	4500	-
Clause no.7.3.2(Hygiene Testing Requirement, Staphylococcus Aureus)	-	2500	-
Clause no.7.6(Anti-Bacterial Activity Value (optional))	-	4000	-
9(Marking)	-	0	-
Cl-7.7 (Amendment No-1)(Phthalate Test (Combined))	-	4000	-
6(Type and Size)	-	500	-
7.1(pH Test)	-	500	-
7.2, Table 2("Rewet under load, (gm), Max for all sizes")	-	1000	-
7.2, Table 2("Minimum absorption capacity (ml) for Small")	-	1000	-
7.2, Table 2("Minimum absorption capacity (ml) for medium")	-	1000	-
7.2, Table 2("Minimum absorption capacity (ml) for Large")	-	1000	-
7.2, Table 2("Minimum absorption capacity (ml) for X large")	-	1000	-

-
-

5182

ABSOLUTE TESTING SERVICES, FARIDABAD

8174526

IS 302 : Part 1 (2024)

Household and Similar Electrical Appliances â Safety Part 1 General Requirements (Seventh Revision)

Domestic Electrical Appliances

45600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(General conditions for the tests)	-	2000	-
6(Classification- IS 302-1)	-	2000	-
7(Marking and instructions)	-	2000	-
8.1.1(Protection against live parts in all positions)	-	2000	-
8.1.2(Protection against live parts in openings)	-	2000	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	2000	-
8.1.4(Protection against live parts against protective impedance)	-	2000	-
8.1.5(Live parts of built-in appliances)	-	2000	-
10.1(Power input)	-	2000	-
10.2(Current input)	-	2000	-
11.1(General)	-	2000	-
11.2(General)	-	2000	-
11.3(Heating)	-	2000	-
11.4(Heating appliances)	-	2000	-
11.5(Motor-operated appliances)	-	2000	-
11.6(Combined appliances)	-	2000	-
11.7(Duration corresponding)	-	2000	-
11.8(Temperature rise)	-	2000	-
13(Leakage current and electric strength at operating temperature)	-	2000	-
13.2(Leakage current at operating temperature)	-	2000	-
13.3(Electric Strength at operating temperature)	-	2000	-
14(Transient Over Voltages)	-	2000	-
15.0(Moisture resistance)	-	2000	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	2000	-
15.2(Spillage Test)	-	2000	-
15.3(Humidity Test)	-	2000	-
16.0(General)	-	2000	-
16(Leakage current and electric strength)	-	2000	-
16.1(General)	-	2000	-
16.2(Leakage Current (after Clause 15))	-	2000	-
16.3(Electric Strength (after clause 15 and 16.2))	-	2000	-
17(Over Load Protection of Transformers and associated circuits)	-	2000	-
18(Endurance)	-	2000	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	2000	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	2000	-
21.1(Mechanical Strength, IS 302-1)	-	2000	-
21.2(Mechanical Strength, IS 302-1)	-	2000	-
21.3(Mechanical Strength, IS 302-1)	-	2000	-
22.1(Construction, IS 302-1)	-	2000	-
22.2(Construction, IS 302-1)	-	2000	-
22.3(Construction, IS 302-1)	-	2000	-
B.22.4(Construction, IS 302-1)	-	2000	-
22.5(Construction)	-	2000	-
22.6(Construction, IS 302-1)	-	2000	-
22.11(Construction, IS 302-1)	-	2000	-
22.16(Construction)	-	2000	-
22.32(Construction, IS 302-1)	-	2000	-
22.42(Construction)	-	2000	-
23.1(Internal Wiring, IS 302-1)	-	2000	-
23.3(Internal Wiring, IS 302-1)	-	2000	-
24(Components)	-	2000	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	2000	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	2000	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	2000	-
26(Terminals for external conductors)	-	2000	-
27.1(Provision for Earthing, IS 302-1)	-	2000	-
28(Screw test and connections)	-	2000	-
28.1(Screws and connections)	-	2000	-
29(clearance, creepage distances and solid insulation)	-	2000	-
30.1(Ball pressure test)	-	2000	-
30.2(Glow Wire Test)	-	2000	-
30.2(Needle Flame Test)	-	2000	-
31(Resistance to Rusting)	-	2000	-
32.1(Radiation Toxicity and Similar Hazards)	-	2000	-
12(Charging of metal-ion batteries)	-	2000	-
19.11.4.7(Harmonics)	-	2000	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	2000	-
19.11.4.5(Immunity to conducted discharges)	-	2000	-
19.11.4.4(Surge immunity test)	-	2000	-
19.11.4.3(Fast transient bursts)	-	2000	-
19.11.4.2(Radiated fields)	-	2000	-
19.11.4.1(Electrostatic discharges)	-	2000	-
4(General requirement)	-	2000	-
19.17(Abnormal Operation, IS 302-1)	-	2000	-
9(Starting of motor operation test requirements and tests)	-	2000	-
A.2(Earth continuity test)	-	2000	-
Annex C(Ageing test on motors)	-	2000	-
Annex D(Thermal motor protectors)	-	2000	-
15.2(Moisture resistance)	-	2000	-
26.5(Terminals for external conductors)	-	2000	-
27.5(Provision for Earthing, IS 302-1)	-	2000	-
B.22.5(Construction, IS 302-1)	-	2000	-
17(Overload protection of transformers and associated circuits)	-	2000	-
18(Endurance)	-	2000	-
19(Abnormal Operation)	-	2000	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	2000	-
25.6(Supply connection and external flexible cords, IS 302-1)	-	2000	-

13 Nov, 2026

-
Included w.e.f 15.10.2025 Exclusion: Cl 19.11.4.1-19.11.4.7(EMI/EMC) "Domestic Electric Clothes Washing Machines (For testing charges please refer part 2 standard in LIMS)"

5183

DELHI TEST HOUSE (65) KUNDLI-2 SONIPAT

9138006

IS 17505 : Part 1 (2021)

Specification for Thermosetting Insulated Fire Survival Cables for Fixed Installation having Low Emission of Smoke and Corrosive Gases when Affected by Fire for Working Voltages upto and including 1100 Vac and 1500 Vdc

135000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 7.3, Table 1 to 5 of IS 8130:2013 & IS:10810 (Part 5)-1984(Conductor Resistance Test)	-	2500	-
Cl. 7.1.2 of IS 8130 : 2013 & IS:10810 (Part 1)-1984(Annealing Test (for copper))	-	1500	-
Cl. 7.1.1 of IS 8130:2013 & IS:10810 (Part 4)-1984(Persulphate Test for tinned copper)	-	2000	-
IS 191:2007 & IS 440(Copper purity test)	-	2000	-
Cl. 11,14,16, Table 4 and Table 6 of IS 17505 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	1500	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 36)-1984(Diameter of armour Wire)	-	1000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 37)-1984(Tensile strength and elongation at break)	-	1000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 38)-1984(Torsion Test on galvanised steel wire for armouring)	-	500	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 39)-1984(Winding Test for Formed Wires)	-	500	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 40)-1984(Uniformity of Zinc coating on Round Steel Wires and Formed Steel Wires (Strips))	-	500	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 41)-1984(Mass of Zinc coating on Round Steel Wires and Formed Steel Wires (Strips))	-	750	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 42)-1984(Resistivity test)	-	1500	-
Table 1 and Table 2 of IS 17505 -1: 2021, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	2500	-
Cl 18.2 of IS 17505-1:2021 & IS:10810 (Part 45)-1984(High voltage test)	-	3500	-
Table 1 of IS 17505-1 :2021 & IS:10810 (Part 43)-1984(Insulation Resistance)	-	2500	-
Cl. 18.6 of IS 17505-1:2021 & IS:10810 (Part 58)-1998(Oxygen index)	-	3000	-
Cl. 18.7 of IS 17505-1:2021 & IS:10810 (Part 64)-2003(Temperature Index)	-	3000	-
Table-1 & Table-2 of IS 17505-1:2021 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	2000	-
Specification for thermosetting insulated fire survival cables for fixed installation having low emission of smoke and corrosive gases when affected by fire for working voltages upto and including 1100 V A.C. and 1500 V D.C(Hot deformation)	-	1500	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	2000	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	2000	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	2000	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	2000	-
Table 1 of IS 17505-1: 2021 & IS:10810 (Part 21)-1984(Cold impact test)	-	1000	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 30)-1984(Hot set test)	-	2500	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 13)-1984(Ozone Resistance test)	-	7500	-
Cl 18.5.1 of IS 17505-1 :2021 & IS:10810 (Part 61)-1988(Flame test on single cable)	-	1000	-
Table 1 of IS 17505-1:2021 & IS:10810 (Part 12)-1984(Shrinkage test)	-	1000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	3000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	2000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	2000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	2000	-
Tabel 1 and 2 of IS 17505-1:2021 & IS:10810 (Part 7)-1984(Tensile strength and elongation at break.)	-	2500	-
Tabel 1 and 2 of IS 17505-1:2021 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	3000	-
Cl 18.6 of IS 17505-1: 2021 & IS:10810 (Part 58)-1998(Oxygen Index.)	-	3000	-
Cl 18.8 of IS 17505-1:2021 & IS:10810 (Part 64)-2003(Temperature Index)	-	3000	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 13)-1984(Ozone resistance test)	-	7500	-
Table 2 of IS 17505-1:2021 & IS:10810 (Part 15)-1984(Hot deformation)	-	1500	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	3000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	1250	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	3500	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	3000	-
Table 1 of IS 17505-1:2021 & IS:10810 (Part 12)-1984(Shrinkage test)	-	1000	-
Cl 18.2of IS 17505-1:2021 & IS:10810 (Part 45)-1984.(High Voltage test.)	-	2000	-
Cl 18.5of IS 17505-1:2021 & IS:10810 (Part 53)-1984(Flammability Test)	-	1000	-
Table-2 of IS 17505-1:2021 & IS:10810 (Part 20)-1984(Cold bend test)	-	1500	-
Table-2 of IS 17505-1:2021 & IS:10810 (Part 21)-1984(Cold impact test)	-	1500	-
Cl 18.5 of IS 17505-1:2021 & IS:10810 (Part 61)-1988(Flammability Test)	-	1000	-
Cl 18.9 of IS 17505-1:2021(Water immersion test ( effect of water on sheath of cable))	-	3000	-
Cl 18.8 of IS 17505-1:2021& IS:10810 (Part 63)-1993(Smoke density test)	-	3000	-
Cl. 3.5, 18.4 & Annex-E of IS 17505-1:2021(Circuit integrity test under fire)	-	45000	-
Cl. 17.1 Table 9 (iv) e(Heat Shock)	-	1000	-
Cl. 17.1 Table 9 (iv) h(Water absorption (Gravimetric))	-	3000	-
Cl. 17.1 Table 9 (vii) b(Flame test on bunched cable)	-	3000	-
Cl. 17.1 Table 9 (ix)(Abrasion resistance test)	-	3000	-
Cl. 17.1 Table 9 (iv) m(Assessment of Halogen (HCl))	-	3000	-
Cl. 7.3, Table 1 to 5 of IS 8130:2013 & IS:10810 (Part 5)-1984(Conductor Resistance Test)	-	2500	-
Cl. 7.1.2 of IS 8130 : 2013 & IS:10810 (Part 1)-1984(Annealing Test (for copper))	-	1500	-
Cl. 7.1.1 of IS 8130:2013 & IS:10810 (Part 4)-1984(Persulphate Test for tinned copper)	-	2000	-
IS 191:2007 & IS 440(Copper purity test)	-	2000	-
Cl. 11,14,16, Table 4 and Table 6 of IS 17505 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	1500	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 36)-1984(Diameter of armour Wire)	-	1000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 37)-1984(Tensile strength and elongation at break)	-	1000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 38)-1984(Torsion Test on galvanised steel wire for armouring)	-	500	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 39)-1984(Winding Test for Formed Wires)	-	500	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 40)-1984(Uniformity of Zinc coating on Round Steel Wires and Formed Steel Wires (Strips))	-	500	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 41)-1984(Mass of Zinc coating on Round Steel Wires and Formed Steel Wires (Strips))	-	750	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 42)-1984(Resistivity test)	-	1500	-
Table 1 and Table 2 of IS 17505 -1: 2021, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	2500	-
Cl 18.2 of IS 17505-1:2021 & IS:10810 (Part 45)-1984(High voltage test)	-	3500	-
Table 1 of IS 17505-1 :2021 & IS:10810 (Part 43)-1984(Insulation Resistance)	-	2500	-
Cl. 18.6 of IS 17505-1:2021 & IS:10810 (Part 58)-1998(Oxygen index)	-	3000	-
Cl. 18.7 of IS 17505-1:2021 & IS:10810 (Part 64)-2003(Temperature Index)	-	3000	-
Table-1 & Table-2 of IS 17505-1:2021 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	2000	-
Specification for thermosetting insulated fire survival cables for fixed installation having low emission of smoke and corrosive gases when affected by fire for working voltages upto and including 1100 V A.C. and 1500 V D.C(Hot deformation)	-	1500	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	2000	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	2000	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	2000	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	2000	-
Table 1 of IS 17505-1: 2021 & IS:10810 (Part 21)-1984(Cold impact test)	-	1000	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 30)-1984(Hot set test)	-	2500	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 13)-1984(Ozone Resistance test)	-	7500	-
Cl 18.5.1 of IS 17505-1 :2021 & IS:10810 (Part 61)-1988(Flame test on single cable)	-	1000	-
Table 1 of IS 17505-1:2021 & IS:10810 (Part 12)-1984(Shrinkage test)	-	1000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	3000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	2000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	2000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	2000	-
Tabel 1 and 2 of IS 17505-1:2021 & IS:10810 (Part 7)-1984(Tensile strength and elongation at break.)	-	2500	-
Tabel 1 and 2 of IS 17505-1:2021 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	3000	-
Cl 18.6 of IS 17505-1: 2021 & IS:10810 (Part 58)-1998(Oxygen Index.)	-	3000	-
Cl 18.8 of IS 17505-1:2021 & IS:10810 (Part 64)-2003(Temperature Index)	-	3000	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 13)-1984(Ozone resistance test)	-	7500	-
Table 2 of IS 17505-1:2021 & IS:10810 (Part 15)-1984(Hot deformation)	-	1500	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	3000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	1250	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	3500	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	3000	-
Table 1 of IS 17505-1:2021 & IS:10810 (Part 12)-1984(Shrinkage test)	-	1000	-
Cl 18.2of IS 17505-1:2021 & IS:10810 (Part 45)-1984.(High Voltage test.)	-	2000	-
Cl 18.5of IS 17505-1:2021 & IS:10810 (Part 53)-1984(Flammability Test)	-	1000	-
Table-2 of IS 17505-1:2021 & IS:10810 (Part 20)-1984(Cold bend test)	-	1500	-
Table-2 of IS 17505-1:2021 & IS:10810 (Part 21)-1984(Cold impact test)	-	1500	-
Cl 18.5 of IS 17505-1:2021 & IS:10810 (Part 61)-1988(Flammability Test)	-	1000	-
Cl 18.9 of IS 17505-1:2021(Water immersion test ( effect of water on sheath of cable))	-	3000	-
Cl 18.8 of IS 17505-1:2021& IS:10810 (Part 63)-1993(Smoke density test)	-	3000	-
Cl. 3.5, 18.4 & Annex-E of IS 17505-1:2021(Circuit integrity test under fire)	-	45000	-
Cl. 17.1 Table 9 (iv) e(Heat Shock)	-	1000	-
Cl. 17.1 Table 9 (iv) h(Water absorption (Gravimetric))	-	3000	-
Cl. 17.1 Table 9 (vii) b(Flame test on bunched cable)	-	3000	-
Cl. 17.1 Table 9 (ix)(Abrasion resistance test)	-	3000	-
Cl. 17.1 Table 9 (iv) m(Assessment of Halogen (HCl))	-	3000	-

31 Dec, 2026

-
Included w.e.f.02.06.2025

5184

Sleen India Biz venture Private Limited, Agra

9139736

IS 17371 (2020)

Geosynthetics – Geogrids for flexible pavements – Specification

All Grades

190000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1("Ultimate tensile strength, (MD × CD)- IS 16635 30/30 40/40 50/50 60/60 80/80 100/100")	-	2000	-
1("Tensile strength at 2 percent strain, (MD × CD- IS 16635 20/20 30/30 40/40")	-	1000	-
1("Tensile strength at 5 percent strain, (MD × CD- IS 16635 20/20 30/30 40/40")	-	1000	-
1(UV resistance, strength retained after 500 h exposure- IS 13162 (part 2))	-	60000	-
1(Chemical resistance, strength retained after 72 h immersion- IS 17363)	-	30000	-
2("Ultimate tensile strength, (MD × CD)- IS 16635 20/20 30/30 40/40")	-	2000	-
2("Tensile strength at 2 percent strain, (MD × CD- IS 16635 20/20 30/30 40/40")	-	1000	-
2("Tensile strength at 5 percent strain, (MD × CD- IS 16635 20/20 30/30 40/40")	-	1000	-
2(UV resistance, strength retained after 500 h exposure- IS 13162 (part 2))	-	60000	-
2(Chemical resistance, strength retained after 72 h immersion- IS 17363)	-	30000	-
2("Junction strength- IS 17371 AnnexB 20/20 30/30 40/40")	-	1500	-
Clause No. 4.1(Geogrid Raw Materials)	-	30000	-
Clause No. 4.1(Carbon Black content of Geogrid)	-	3000	-
Clause No. 4.4(PET Geogrid weight)	-	15000	-
Clause No. 4.4(PET Geogrid carboxyl end group content)	-	15000	-
Clause No. 4.5(Identification of Geogrid)	-	1000	-
Clause No. 5.2, Table No. 1 (ii)(Tensile strength at 2 percent strain, (MD × CD) kN/m of PET Geogrids)	-	10000	-
Clause No. 5.2, Table No. 1 (iii)(Tensile strength at 5 percent strain, (MD × CD) kN/m of PET Geogrids)	-	1000	-
Clause No. 5.2, table No. 1 (iv)(UV resistance, strength retained after 500 h exposure of PET Geogrids)	-	60000	-
Clause No. 5.2, Table No. 1 (v)(Chemical resistance, strength retained after 72 h immersion of PET Geogrids)	-	30000	-
Clause No. 5.2, table No. 1 (vi)(Width of PET Geogrids)	-	500	-
Clause No. 5.2, Table No. 1 (vii)(Roll length of PET Geogrids)	-	500	-
Clause No. 5.2, Table No. 2 (i)(Ultimate tensile strength, (MD × CD) kN/m of PP Geogrids)	-	2000	-
Clause No. 5.2, Table No. 2 (ii)(Tensile strength at 2 percent strain, (MD × CD) kN/m of PP Geogrids)	-	1000	-
Clause No. 5.2, Table No. 2 (iii)(Tensile strength at 5 percent strain, (MD × CD) kN/m of PP Geogrids)	-	1000	-
Clause No. 5.2, table No. 2 (iv)(UV resistance, strength retained after 500 h exposure of PP Geogrids)	-	60000	-
Clause No. 5.2, Table No. 2 (v)(Chemical resistance, strength retained after 72 h immersion of PP Geogrids)	-	30000	-
Clause No. 5.2, Table No. 2 (vi)(Junction strength, percent strength of original strength)	-	1500	-
Clause No. 5.2, table No. 2 (vii)(Width of PP Geogrids)	-	500	-
Clause No. 5.2, Table No. 2 (viii)(Roll length of PP Geogrids)	-	500	-
4.1(MATERIALS - Geogrid materials shall be inert to all chemicals naturally found in commonly encountered soils not containing adverse solvents and at ambient temperatures)	-	30000	-
4.2(MATERIALS - Geogrids shall be rendered resistant to UV. Rigid geogrids shall have minimum 2 percent (mass/mass) of carbon black content)	-	3000	-
4.3(MATERIALS - The geogrid shall be resistant to commonly encountered chemicals and microorganisms (rot and mildew) normally found in soils and shall be stabilized against short term exposure to solar radiation)	-	500	-
4.4(MATERIALS - PET geogrids, it shall have average molecular weight more than or equal to 25,000 g/mol)	-	30000	-
4.5(MATERIALS - Identification of Geogrid)	-	1000	-
5.1(REQUIREMENTS FOR GEOGRIDS -Geogrids shall be dimensionally stable and able to retain their geometry under manufacture, transport, and installation)	-	1000	-
5.2- Table 1- i)(REQUIREMENTS FOR PET GEOGRIDS - Ultimate tensile strength, (MD × CD) kN/m)	-	2000	-
5.2- Table 1- ii)(REQUIREMENTS FOR PET GEOGRIDS - Tensile strength at 2 percent strain, (MD × CD) kN/m,)	-	1000	-
5.2- Table 1- iii)(REQUIREMENTS FOR PET GEOGRIDS - Tensile strength at 5 percent strain, (MD × CD) kN/m,)	-	1000	-
5.2- Table 1- iv)(REQUIREMENTS FOR PET GEOGRIDS - UV resistance, strength retained after 500 h exposure)	-	60000	-
5.2- Table 1- v)(REQUIREMENTS FOR GEOGRIDS - Chemical resistance, strength retained after 72 h immersion)	-	30000	-
5.2- Table 1- vi)(REQUIREMENTS FOR PET GEOGRIDS - Width)	-	500	-
5.2- Table 1- vii)(REQUIREMENTS FOR PET GEOGRIDS - Roll length)	-	500	-
5.2- Table 2- i)(REQUIREMENTS FOR PP GEOGRIDS - Ultimate tensile strength, (MD × CD) kN/m)	-	2000	-
5.2- Table 2- ii)(REQUIREMENTS FOR PP GEOGRIDS - Tensile strength at 2 percent strain, (MD × CD) kN/m)	-	1000	-
5.2- Table 2- iii)(REQUIREMENTS FOR PP GEOGRIDS - Tensile strength at 5 percent strain, (MD × CD) kN/m,)	-	1000	-
5.2- Table 2- iv)(REQUIREMENTS FOR PP GEOGRIDS - UV resistance, strength retained after 500 h exposure)	-	60000	-
5.2- Table 2- v)(REQUIREMENTS FOR PP GEOGRIDS - Chemical resistance, strength retained after 72 h immersion)	-	30000	-
5.2- Table 2- vi)(REQUIREMENTS FOR PP GEOGRIDS - Junction strength, percent strength of original strength)	-	1500	-
5.2- Table 2- vii)(REQUIREMENTS FOR PP GEOGRIDS - Width)	-	500	-
5.2- Table 2- vIii)(REQUIREMENTS FOR PET GEOGRIDS - Roll length)	-	500	-
6(MARKING AND LABELLING)	-	1000	-
7(PACKING - minimum thickness of packing film)	-	500	-
8.1(IDENTIFICATION, DELIVERY, STORAGE AND HANDLING)	-	1000	-
1("Ultimate tensile strength, (MD × CD)- IS 16635 30/30 40/40 50/50 60/60 80/80 100/100")	-	0	Repeated Clause.
1("Tensile strength at 2 percent strain, (MD × CD- IS 16635 20/20 30/30 40/40")	-	0	Repeated Clause.
1("Tensile strength at 5 percent strain, (MD × CD- IS 16635 20/20 30/30 40/40")	-	0	Repeated Clause.
1(UV resistance, strength retained after 500 h exposure- IS 13162 (part 2))	-	0	Repeated Clause.
1(Chemical resistance, strength retained after 72 h immersion- IS 17363)	-	0	Repeated Clause.
2("Ultimate tensile strength, (MD × CD)- IS 16635 20/20 30/30 40/40")	-	0	Repeated Clause.
2("Tensile strength at 2 percent strain, (MD × CD- IS 16635 20/20 30/30 40/40")	-	0	Repeated Clause.
2("Tensile strength at 5 percent strain, (MD × CD- IS 16635 20/20 30/30 40/40")	-	0	Repeated Clause.
2(UV resistance, strength retained after 500 h exposure- IS 13162 (part 2))	-	0	Repeated Clause.
2(Chemical resistance, strength retained after 72 h immersion- IS 17363)	-	0	Repeated Clause.
2("Junction strength- IS 17371 AnnexB 20/20 30/30 40/40")	-	0	Repeated Clause.
Clause No. 4.1(Geogrid Raw Materials)	-	0	Repeated Clause.
Clause No. 4.1(Carbon Black content of Geogrid)	-	0	Repeated Clause.
Clause No. 4.4(PET Geogrid weight)	-	0	Repeated Clause.
Clause No. 4.4(PET Geogrid carboxyl end group content)	-	0	Repeated Clause.
Clause No. 4.5(Identification of Geogrid)	-	0	Repeated Clause.
Clause No. 5.2, Table No. 1 (ii)(Tensile strength at 2 percent strain, (MD × CD) kN/m of PET Geogrids)	-	0	Repeated Clause.
Clause No. 5.2, Table No. 1 (iii)(Tensile strength at 5 percent strain, (MD × CD) kN/m of PET Geogrids)	-	0	Repeated Clause.
Clause No. 5.2, table No. 1 (iv)(UV resistance, strength retained after 500 h exposure of PET Geogrids)	-	0	Repeated Clause.
Clause No. 5.2, Table No. 1 (v)(Chemical resistance, strength retained after 72 h immersion of PET Geogrids)	-	0	Repeated Clause.
Clause No. 5.2, table No. 1 (vi)(Width of PET Geogrids)	-	0	Repeated Clause.
Clause No. 5.2, Table No. 1 (vii)(Roll length of PET Geogrids)	-	0	Repeated Clause.
Clause No. 5.2, Table No. 2 (i)(Ultimate tensile strength, (MD × CD) kN/m of PP Geogrids)	-	0	Repeated Clause.
Clause No. 5.2, Table No. 2 (ii)(Tensile strength at 2 percent strain, (MD × CD) kN/m of PP Geogrids)	-	0	Repeated Clause.
Clause No. 5.2, Table No. 2 (iii)(Tensile strength at 5 percent strain, (MD × CD) kN/m of PP Geogrids)	-	0	Repeated Clause.
Clause No. 5.2, table No. 2 (iv)(UV resistance, strength retained after 500 h exposure of PP Geogrids)	-	0	Repeated Clause.
Clause No. 5.2, Table No. 2 (v)(Chemical resistance, strength retained after 72 h immersion of PP Geogrids)	-	0	Repeated Clause.
Clause No. 5.2, Table No. 2 (vi)(Junction strength, percent strength of original strength)	-	0	Repeated Clause.
Clause No. 5.2, table No. 2 (vii)(Width of PP Geogrids)	-	0	Repeated Clause.
Clause No. 5.2, Table No. 2 (viii)(Roll length of PP Geogrids)	-	0	Repeated Clause.
4.1(MATERIALS - Geogrid materials shall be inert to all chemicals naturally found in commonly encountered soils not containing adverse solvents and at ambient temperatures)	-	0	Repeated Clause.
4.2(MATERIALS - Geogrids shall be rendered resistant to UV. Rigid geogrids shall have minimum 2 percent (mass/mass) of carbon black content)	-	0	Repeated Clause.
4.3(MATERIALS - The geogrid shall be resistant to commonly encountered chemicals and microorganisms (rot and mildew) normally found in soils and shall be stabilized against short term exposure to solar radiation)	-	0	Repeated Clause.
4.4(MATERIALS - PET geogrids, it shall have average molecular weight more than or equal to 25,000 g/mol)	-	0	Repeated Clause.
4.5(MATERIALS - Identification of Geogrid)	-	0	Repeated Clause.
5.1(REQUIREMENTS FOR GEOGRIDS -Geogrids shall be dimensionally stable and able to retain their geometry under manufacture, transport, and installation)	-	0	Repeated Clause.
5.2- Table 1- i)(REQUIREMENTS FOR PET GEOGRIDS - Ultimate tensile strength, (MD × CD) kN/m)	-	0	Repeated Clause.
5.2- Table 1- ii)(REQUIREMENTS FOR PET GEOGRIDS - Tensile strength at 2 percent strain, (MD × CD) kN/m,)	-	0	Repeated Clause.
5.2- Table 1- iii)(REQUIREMENTS FOR PET GEOGRIDS - Tensile strength at 5 percent strain, (MD × CD) kN/m,)	-	0	Repeated Clause.
5.2- Table 1- iv)(REQUIREMENTS FOR PET GEOGRIDS - UV resistance, strength retained after 500 h exposure)	-	0	Repeated Clause.
5.2- Table 1- v)(REQUIREMENTS FOR GEOGRIDS - Chemical resistance, strength retained after 72 h immersion)	-	0	Repeated Clause.
5.2- Table 1- vi)(REQUIREMENTS FOR PET GEOGRIDS - Width)	-	0	Repeated Clause.
5.2- Table 1- vii)(REQUIREMENTS FOR PET GEOGRIDS - Roll length)	-	0	Repeated Clause.
5.2- Table 2- i)(REQUIREMENTS FOR PP GEOGRIDS - Ultimate tensile strength, (MD × CD) kN/m)	-	0	Repeated Clause.
5.2- Table 2- ii)(REQUIREMENTS FOR PP GEOGRIDS - Tensile strength at 2 percent strain, (MD × CD) kN/m)	-	0	Repeated Clause.
5.2- Table 2- iii)(REQUIREMENTS FOR PP GEOGRIDS - Tensile strength at 5 percent strain, (MD × CD) kN/m,)	-	0	Repeated Clause.
5.2- Table 2- iv)(REQUIREMENTS FOR PP GEOGRIDS - UV resistance, strength retained after 500 h exposure)	-	0	Repeated Clause.
5.2- Table 2- v)(REQUIREMENTS FOR PP GEOGRIDS - Chemical resistance, strength retained after 72 h immersion)	-	0	Repeated Clause.
5.2- Table 2- vi)(REQUIREMENTS FOR PP GEOGRIDS - Junction strength, percent strength of original strength)	-	0	Repeated Clause.
5.2- Table 2- vii)(REQUIREMENTS FOR PP GEOGRIDS - Width)	-	0	Repeated Clause.
5.2- Table 2- vIii)(REQUIREMENTS FOR PET GEOGRIDS - Roll length)	-	0	Repeated Clause.
6(MARKING AND LABELLING)	-	0	Repeated Clause.
7(PACKING - minimum thickness of packing film)	-	0	Repeated Clause.
8.1(IDENTIFICATION, DELIVERY, STORAGE AND HANDLING)	-	0	Repeated Clause.
1("Ultimate tensile strength, (MD × CD)- IS 16635 30/30 40/40 50/50 60/60 80/80 100/100")	-	0	-
1("Tensile strength at 2 percent strain, (MD × CD- IS 16635 20/20 30/30 40/40")	-	0	-
1("Tensile strength at 5 percent strain, (MD × CD- IS 16635 20/20 30/30 40/40")	-	0	-
1(UV resistance, strength retained after 500 h exposure- IS 13162 (part 2))	-	0	-
1(Chemical resistance, strength retained after 72 h immersion- IS 17363)	-	0	-
2("Ultimate tensile strength, (MD × CD)- IS 16635 20/20 30/30 40/40")	-	0	-
2("Tensile strength at 2 percent strain, (MD × CD- IS 16635 20/20 30/30 40/40")	-	0	-
2("Tensile strength at 5 percent strain, (MD × CD- IS 16635 20/20 30/30 40/40")	-	0	-
2(UV resistance, strength retained after 500 h exposure- IS 13162 (part 2))	-	0	-
2(Chemical resistance, strength retained after 72 h immersion- IS 17363)	-	0	-
2("Junction strength- IS 17371 AnnexB 20/20 30/30 40/40")	-	0	-
Clause No. 4.1(Geogrid Raw Materials)	-	0	-
Clause No. 4.1(Carbon Black content of Geogrid)	-	0	-
Clause No. 4.4(PET Geogrid weight)	-	0	-
Clause No. 4.4(PET Geogrid carboxyl end group content)	-	0	-
Clause No. 4.5(Identification of Geogrid)	-	0	-
Clause No. 5.2, Table No. 1 (ii)(Tensile strength at 2 percent strain, (MD × CD) kN/m of PET Geogrids)	-	0	-
Clause No. 5.2, Table No. 1 (iii)(Tensile strength at 5 percent strain, (MD × CD) kN/m of PET Geogrids)	-	0	-
Clause No. 5.2, table No. 1 (iv)(UV resistance, strength retained after 500 h exposure of PET Geogrids)	-	0	-
Clause No. 5.2, Table No. 1 (v)(Chemical resistance, strength retained after 72 h immersion of PET Geogrids)	-	0	-
Clause No. 5.2, table No. 1 (vi)(Width of PET Geogrids)	-	0	-
Clause No. 5.2, Table No. 1 (vii)(Roll length of PET Geogrids)	-	0	-
Clause No. 5.2, Table No. 2 (i)(Ultimate tensile strength, (MD × CD) kN/m of PP Geogrids)	-	0	-
Clause No. 5.2, Table No. 2 (ii)(Tensile strength at 2 percent strain, (MD × CD) kN/m of PP Geogrids)	-	0	-
Clause No. 5.2, Table No. 2 (iii)(Tensile strength at 5 percent strain, (MD × CD) kN/m of PP Geogrids)	-	0	-
Clause No. 5.2, table No. 2 (iv)(UV resistance, strength retained after 500 h exposure of PP Geogrids)	-	0	-
Clause No. 5.2, Table No. 2 (v)(Chemical resistance, strength retained after 72 h immersion of PP Geogrids)	-	0	-
Clause No. 5.2, Table No. 2 (vi)(Junction strength, percent strength of original strength)	-	0	-
Clause No. 5.2, table No. 2 (vii)(Width of PP Geogrids)	-	0	-
Clause No. 5.2, Table No. 2 (viii)(Roll length of PP Geogrids)	-	0	-
4.1(MATERIALS - Geogrid materials shall be inert to all chemicals naturally found in commonly encountered soils not containing adverse solvents and at ambient temperatures)	-	0	-
4.2(MATERIALS - Geogrids shall be rendered resistant to UV. Rigid geogrids shall have minimum 2 percent (mass/mass) of carbon black content)	-	0	-
4.3(MATERIALS - The geogrid shall be resistant to commonly encountered chemicals and microorganisms (rot and mildew) normally found in soils and shall be stabilized against short term exposure to solar radiation)	-	0	-
4.4(MATERIALS - PET geogrids, it shall have average molecular weight more than or equal to 25,000 g/mol)	-	0	-
4.5(MATERIALS - Identification of Geogrid)	-	0	-
5.1(REQUIREMENTS FOR GEOGRIDS -Geogrids shall be dimensionally stable and able to retain their geometry under manufacture, transport, and installation)	-	0	-
5.2- Table 1- i)(REQUIREMENTS FOR PET GEOGRIDS - Ultimate tensile strength, (MD × CD) kN/m)	-	0	-
5.2- Table 1- ii)(REQUIREMENTS FOR PET GEOGRIDS - Tensile strength at 2 percent strain, (MD × CD) kN/m,)	-	0	-
5.2- Table 1- iii)(REQUIREMENTS FOR PET GEOGRIDS - Tensile strength at 5 percent strain, (MD × CD) kN/m,)	-	0	-
5.2- Table 1- iv)(REQUIREMENTS FOR PET GEOGRIDS - UV resistance, strength retained after 500 h exposure)	-	0	-
5.2- Table 1- v)(REQUIREMENTS FOR GEOGRIDS - Chemical resistance, strength retained after 72 h immersion)	-	0	-
5.2- Table 1- vi)(REQUIREMENTS FOR PET GEOGRIDS - Width)	-	0	-
5.2- Table 1- vii)(REQUIREMENTS FOR PET GEOGRIDS - Roll length)	-	0	-
5.2- Table 2- i)(REQUIREMENTS FOR PP GEOGRIDS - Ultimate tensile strength, (MD × CD) kN/m)	-	0	-
5.2- Table 2- ii)(REQUIREMENTS FOR PP GEOGRIDS - Tensile strength at 2 percent strain, (MD × CD) kN/m)	-	0	-
5.2- Table 2- iii)(REQUIREMENTS FOR PP GEOGRIDS - Tensile strength at 5 percent strain, (MD × CD) kN/m,)	-	0	-
5.2- Table 2- iv)(REQUIREMENTS FOR PP GEOGRIDS - UV resistance, strength retained after 500 h exposure)	-	0	-
5.2- Table 2- v)(REQUIREMENTS FOR PP GEOGRIDS - Chemical resistance, strength retained after 72 h immersion)	-	0	-
5.2- Table 2- vi)(REQUIREMENTS FOR PP GEOGRIDS - Junction strength, percent strength of original strength)	-	0	-
5.2- Table 2- vii)(REQUIREMENTS FOR PP GEOGRIDS - Width)	-	0	-
5.2- Table 2- vIii)(REQUIREMENTS FOR PET GEOGRIDS - Roll length)	-	0	-
6(MARKING AND LABELLING)	-	0	-
7(PACKING - minimum thickness of packing film)	-	0	-
8.1(IDENTIFICATION, DELIVERY, STORAGE AND HANDLING)	-	0	-

-
Included w.e.f 02.06.2025

5185

DELHI TEST HOUSE (65) KUNDLI-2 SONIPAT

9138006

IS 398 : Part 6 (2021)

Aluminium Conductors For Overhead Transmission Purposes Part 6: High conductivity aluminium alloy stranded conductors

150000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
16.2(Visual Examination)	-	1000	Up to 80 mm² = RS. 10000/- Above 80 mm² to 200 mm² = RS. 100000/- Above 200 mm² to 276 mm² = RS. 125000/- Above 276 mm² to 744 mm² = RS. 150000/-
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	5000	Up to 80 mm² = RS. 10000/- Above 80 mm² to 200 mm² = RS. 100000/- Above 200 mm² to 276 mm² = RS. 125000/- Above 276 mm² to 744 mm² = RS. 150000/-
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	5000	Up to 80 mm² = RS. 10000/- Above 80 mm² to 200 mm² = RS. 100000/- Above 200 mm² to 276 mm² = RS. 125000/- Above 276 mm² to 744 mm² = RS. 150000/-
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	5000	Up to 80 mm² = RS. 10000/- Above 80 mm² to 200 mm² = RS. 100000/- Above 200 mm² to 276 mm² = RS. 125000/- Above 276 mm² to 744 mm² = RS. 150000/-
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	5000	Up to 80 mm² = RS. 10000/- Above 80 mm² to 200 mm² = RS. 100000/- Above 200 mm² to 276 mm² = RS. 125000/- Above 276 mm² to 744 mm² = RS. 150000/-
16.4, Table 2(Measurement of Diameter of Individual Aluminium Alloy Wires)	-	12000	Up to 80 mm² = RS. 10000/- Above 80 mm² to 200 mm² = RS. 100000/- Above 200 mm² to 276 mm² = RS. 125000/- Above 276 mm² to 744 mm² = RS. 150000/-
16.5, Table 2(Breaking Load Test - before stranding)	-	2000	Up to 80 mm² = RS. 10000/- Above 80 mm² to 200 mm² = RS. 100000/- Above 200 mm² to 276 mm² = RS. 125000/- Above 276 mm² to 744 mm² = RS. 150000/-
16.5, Table 2(Breaking Load Test - after stranding)	-	15000	Up to 80 mm² = RS. 10000/- Above 80 mm² to 200 mm² = RS. 100000/- Above 200 mm² to 276 mm² = RS. 125000/- Above 276 mm² to 744 mm² = RS. 150000/-
16.6, Table 1(Elongation Test - before stranding)	-	2000	Up to 80 mm² = RS. 10000/- Above 80 mm² to 200 mm² = RS. 100000/- Above 200 mm² to 276 mm² = RS. 125000/- Above 276 mm² to 744 mm² = RS. 150000/-
16.6, Table 1(Elongation Test - after stranding)	-	5000	Up to 80 mm² = RS. 10000/- Above 80 mm² to 200 mm² = RS. 100000/- Above 200 mm² to 276 mm² = RS. 125000/- Above 276 mm² to 744 mm² = RS. 150000/-
16.7, Table 2(Resistivity Test)	-	13000	Up to 80 mm² = RS. 10000/- Above 80 mm² to 200 mm² = RS. 100000/- Above 200 mm² to 276 mm² = RS. 125000/- Above 276 mm² to 744 mm² = RS. 150000/-
16.8(Wrapping Test)	-	5000	Up to 80 mm² = RS. 10000/- Above 80 mm² to 200 mm² = RS. 100000/- Above 200 mm² to 276 mm² = RS. 125000/- Above 276 mm² to 744 mm² = RS. 150000/-
11(Stranding)	-	3000	Up to 80 mm² = RS. 10000/- Above 80 mm² to 200 mm² = RS. 100000/- Above 200 mm² to 276 mm² = RS. 125000/- Above 276 mm² to 744 mm² = RS. 150000/-
8(Freedom from defects)	-	2000	Up to 80 mm² = RS. 10000/- Above 80 mm² to 200 mm² = RS. 100000/- Above 200 mm² to 276 mm² = RS. 125000/- Above 276 mm² to 744 mm² = RS. 150000/-
16.9, Table 3(Ultimate Tensile Strength on Stranded Conductor)	-	20000	Up to 80 mm² = RS. 10000/- Above 80 mm² to 200 mm² = RS. 100000/- Above 200 mm² to 276 mm² = RS. 125000/- Above 276 mm² to 744 mm² = RS. 150000/-
16.10, Table 3(d.c. Resistance Test on Stranded Conductor)	-	15000	Up to 80 mm² = RS. 10000/- Above 80 mm² to 200 mm² = RS. 100000/- Above 200 mm² to 276 mm² = RS. 125000/- Above 276 mm² to 744 mm² = RS. 150000/-
16.11(Stress-strain Test)	-	35000	Up to 80 mm² = RS. 10000/- Above 80 mm² to 200 mm² = RS. 100000/- Above 200 mm² to 276 mm² = RS. 125000/- Above 276 mm² to 744 mm² = RS. 150000/-

31 Dec, 2026

-
Included w.e.f 07.05.2025

5186

Global Scientific Solution (P) Ltd.

8189526

IS 996 (2009)

Single phase a.c. induction motors for general purpose (Third Revision)

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
10(Type of enclosures)	-	1000	-
11(Methods of cooling)	-	1000	-
9.1(General construction (as per Cl. 9 & F-3))	-	1000	-
9(General construction (as per Cl. 9 & F-3))	-	1000	-
9.4.11(General construction (as per Cl. 9 & F-3))	-	1000	-
9(General construction (as per Cl. 9 & F-3))	-	1000	-
9.4.11(General construction (as per Cl. 9 & F-3))	-	1000	-
9.4.13(General construction (as per Cl. 9 & F-3))	-	1000	-
4.1(Rated Voltage)	-	1000	-
4.2(Rated Frequency)	-	1000	-
4.3(Rated Output)	-	1000	-
4.4(Rated Speed)	-	1000	-
7(Dimensions (Cl.App.F-4))	-	1000	-
9.5(Earthing)	-	1000	-
9.5(Earthing)	-	1000	-
9.5(Earthing)	-	1000	-
17.3 (a)(No load test at rated voltage and frequency )	-	1000	-
17.3 (a)(No load test at rated voltage and frequency)	-	1000	-
17.3 (a)(No load test at rated voltage and frequency)	-	1000	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	1000	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	1000	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	1000	-
12.1.1(Test for Breakaway starting current at rated voltage and frequency (Cl.12.1.1 & Cl. 12.5))	-	2000	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	2000	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	2000	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	2000	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	2000	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	2000	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	1000	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	1000	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	1000	-
12.7(Insulation resistance test)	-	1000	-
13.1(High voltage test)	-	1000	-
13.2(Moisture proofness)	-	2000	-
13.2(Moisture proofness)	-	2000	-
13.3(Leakage current test)	-	1000	-
12.6(Vibration Severity)	-	2000	-
15.1(ADDITIONAL TESTS (For ECO - MARK))	-	2000	-
15.1.5(Noise Level)	-	1000	-
15.2(Specific Requirements)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
10(Type of enclosures)	-	1000	-
11(Methods of cooling)	-	1000	-
9.1(General construction (as per Cl. 9 & F-3))	-	1000	-
9(General construction (as per Cl. 9 & F-3))	-	1000	-
9.4.11(General construction (as per Cl. 9 & F-3))	-	1000	-
9(General construction (as per Cl. 9 & F-3))	-	1000	-
9.4.11(General construction (as per Cl. 9 & F-3))	-	1000	-
9.4.13(General construction (as per Cl. 9 & F-3))	-	1000	-
4.1(Rated Voltage)	-	1000	-
4.2(Rated Frequency)	-	1000	-
4.3(Rated Output)	-	1000	-
4.4(Rated Speed)	-	1000	-
9.5(Earthing)	-	1000	-
9.5(Earthing)	-	1000	-
9.5(Earthing)	-	1000	-
17.3 (a)(No load test at rated voltage and frequency )	-	1000	-
17.3 (a)(No load test at rated voltage and frequency)	-	1000	-
17.3 (a)(No load test at rated voltage and frequency)	-	1000	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	1000	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	1000	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	1000	-
12.1.1(Test for Breakaway starting current at rated voltage and frequency (Cl.12.1.1 & Cl. 12.5))	-	1000	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	1000	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	1000	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	1000	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	1000	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	1000	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	1000	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	1000	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	1000	-
12.7(Insulation resistance test)	-	1000	-
13.1(High voltage test)	-	1000	-
13.2(Moisture proofness)	-	1000	-
13.2(Moisture proofness)	-	1000	-
13.3(Leakage current test)	-	1000	-
12.6(Vibration Severity)	-	2000	-
15.1(ADDITIONAL TESTS (For ECO - MARK))	-	1000	-
15.1.5(Noise Level)	-	1000	-
15.2(Specific Requirements)	-	1000	-
9.0(Observation)	-	1000	-
7.2(Dimensions)	-	1000	-
11.0(Observation)	-	1000	-
17.3 (j)(Observation)	-	1000	-
9.5(Observation)	-	1000	-
14.0(Observation)	-	1000	-
16.0(Observation)	-	1000	-
17.4 & 9.4.6.1(Observation)	-	1000	-
17.3 (k)(Current)	-	1000	-
17.3 (m)(Vibration)	-	2000	-
17.3 (g)(Insulation Resistance)	-	1000	-
17.3 (h)(Voltage)	-	1000	-
17.3 (b)(Temperature)	-	1000	-
17.3 (e)(Temperature)	-	1000	-
17.3 (f)(Torque)	-	1000	-
17.3 (c)(Current, Torque)	-	1000	-
17.3 (d)(Voltage, Current, Power, Frequency, Speed, Efficiency, Power factor, Slip)	-	1000	-
17.3 (a)(Voltage, Current, Power, Frequency, Speed)	-	1000	-
14(Terminal marking)	-	1000	-
12.1.2(Momentary overload for motors)	-	1000	-
16(Observation)	-	1000	-
14(Observation)	-	1000	-
9.5(Observation)	-	1000	-
17.3 (a)(Voltage, Current, Power, Frequency, Speed)	-	1000	-
17.3 (d)(Voltage, Current, Power, Frequency, Speed, Efficiency, Power factor, Slip)	-	1000	-
17.3 (c)(Current, Torque)	-	1000	-
17.3 (f)(Torque)	-	1000	-
17.3 (e)(Temperature)	-	1000	-
17.3 (b)(Temperature)	-	1000	-
17.3 (h)(Voltage)	-	1000	-
17.3 (g)(Insulation Resistance)	-	1000	-
17.3 (m)(Vibration)	-	2000	-
17.3 (j)(Observation)	-	1000	-
17.3 (k)(Current)	-	1000	-
11(Observation)	-	1000	-
17.4 & 9.4.6.1(Observation)	-	1000	-
7.2(Dimensions)	-	1000	-
9(Observation)	-	1000	-
16(Observation)	-	1000	-
14(Observation)	-	1000	-
9.5(Observation)	-	1000	-
17.3 (a)(Voltage, Current, Power, Frequency, Speed)	-	1000	-
17.3 (d)(Voltage, Current, Power, Frequency, Speed, Efficiency, Power factor, Slip)	-	1000	-
17.3 (c)(Current, Torque)	-	1000	-
17.3 (f)(Torque)	-	1000	-
17.3 (e)(Temperature)	-	1000	-
17.3 (b)(Temperature)	-	1000	-
17.3 (h)(Voltage)	-	1000	-
17.3 (g)(Insulation Resistance)	-	1000	-
17.3 (m)(Vibration)	-	2000	-
17.3 (j)(Observation)	-	1000	-
17.3 (k)(Current)	-	1000	-
11(Observation)	-	1000	-
17.4 & 9.4.6.1(Observation)	-	1000	-
7.2(Dimensions)	-	1000	-
9(Observation)	-	1000	-

31 Oct, 2028

-
Above 750W

5187

THE SOUTH INDIA TEXTILE RESEARCH ASSOCIATION (SITRA), COIMBATORE

6165234

IS 5405 (2025)

Disposable Sanitary Napkin/Panty Liner/Maternity Pad/Period Panty - Specification ( Third Revision )

Disposable Sanitary Napkin/Panty Liner/Maternity Pad/Period Panty

15025 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Cover/Top sheet)	-	1000	-
3.2(Absorbent core)	-	0	Testing charges covered under clause 3.1
3.3(Barrier or bottom sheet)	-	0	Testing charges covered under clause 3.1
4.1(Types)	-	0	Testing charges covered under clause 3.1
4.2(shapes)	-	0	Testing charges covered under clause 3.1
5(Sizes)	-	250	-
6.1(Manufacture, workmanship and finish)	-	0	Testing charges covered under clause 3.1
6.2(Manufacture, workmanship and finish)	-	0	Testing charges covered under clause 3.1
7.1(pH Test)	-	300	-
7.2("Ability to Withstand Pressure after Absorption: Liquid Absorption ml, Min")	-	675	-
7.3.1(Bacterial and Fungal Bioburden)	-	3050	-
7.3.2(Staphylococcus aureus)	-	800	-
7.4(Biocompatibility evaluation - Cytotoxicity (IS/ISO 10993 P-5))	-	2600	-
Cl 7.5(Phthalate test- Combination)	-	3500	-
7.7(Anti bacterial activity value (Optional) (IS/ISO 20743))	-	2850	-
3.1(Cover/Top Sheet (non sterile gauze))	-	0	Parameter repeated
3.1(Cover/Top Sheet (sterile gauze))	-	0	Parameter repeated
Cl. 5 Table-1(Type)	-	0	Parameter repeated
Cl. 5 Table-1(Size class)	-	0	Parameter repeated
Cl. 5 Table-1(Length (Absorbent core only))	-	0	Parameter repeated
Cl. 5 Table-1(Width (Absorbent core only))	-	0	Parameter repeated
5(Size)	-	0	Parameter repeated

-
Included w.e.f. 11.06.2025 Exclusion Cl 7.4 (Biocompatibility evaluation - Irritation (IS 17932 P-7)) Cl 7.4 (Biocompatibility evaluation - skin Sensitization (Optional) (IS 17932 P-6)) Cl 7.6 (Compostability (Optional) (IS/ISO 17088))

5188

Aaditech Test and Calibration Lab LLP

8179926

IS 4250 (2025)

Electric Food-Mixers (Liquidizers and Grinders) and Centrifugal Juicers ï¿½ Specification ( Second Revision )

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General Requirements)	-	500	-
Cl-5(General Conditions for the tests)	-	500	-
Cl-6(Classification)	-	500	-
Cl-7(Marking)	-	500	-
Cl-14.2, 14.3 Table-2 (vi)(Provision for earthing)	-	1000	-
Cl-9(Endurance fpr motor and base assembly)	-	3000	-
Cl-10.2("Grinding Coffee (for Machines that Have a Dry Grinding Arrangement)")	-	2000	-
Cl-10.3(Whisking Egg Whites (for Machines that have Whisking Egg Arrangement))	-	2000	-
Cl-10.4(Idli Batter)	-	2000	-
Cl-10.5(Operational Tests for Juicers)	-	2000	-
Cl-11(Temperature Withstand Test for Bowl)	-	1000	-
Cl-12.1(Test for Switches)	-	1000	-
Cl-13(Strength of Assembly)	-	1000	-
Cl-14.2, 14.3 Table-2 (i)(Protection against access to live parts)	-	1000	-
Cl-14.2, Table-2 (ii)(Power input and current)	-	1000	-
Cl-14.2, 14.3 Table-2 (iii)(Leakage current and electric strength at operating temperature)	-	1000	-
Cl-14.2, Table-2 (iv)(Moisture resistance)	-	1000	-
Cl-14.2, Table-2 (v)(Leakage current and electric strength)	-	1000	-
Cl-8(Safety Requirements)	-	15000	-

-
Included w.e.f 07.05.2025 Exclusion Cl 19.11.4.1- 19.11.4.7(EMI/EMC)

5189

BIS, Western Regional Laboratory (WRL)

None

IS 17425 (2020)

Irrigation Equipment - Quick Coupled Polyethylene Pipes and Fittings for Sprinkler Irrigation Systems - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5 (Dimensions of pipe - i) Outside diameter)	-
5 (Dimensions of pipe - ii) Wall thickness minimum)	-
6 (Visual Appearance)	-
7.1 (Hydraulic Characteristics - Acceptance test)	-
7.2 (Reversion Test)	-
7.3 (Tensile Test- i) Tensile Strength)	-
7.3 (Tensile Test - ii)Elongation at Break)	-
7.5 (Density)	-
7.6 (Melt Flow Rate)	-
4.2 (Carbon black- b) Dispersion of carbon black)	-
4.1.3 (Workmanship and appearance)	-
6.1.3 (Weldability Test- b) Acceptance test)	-
6.1.2, 6.1.2.1 (Hydraulic Proof Test)	-
6.1.1, 6.1.1.1 (Leakage Test)	-
10 (Marking)	-
6.1 (Carbon Black Content)	-

-
Test facility not available for: (1) Fusion Compatibility Test & (2) Long Term Hydrostatic Test (Quality Test)

5190

Gravitas Laboratories Private Limited, Greater Noida

8182606

IS 1993 (2018)

Cold - Reduced tinmill products - Electrolytic tinplate (Fifth Revision)

All type.

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Annex-C(Nickel)	-	10000	-
Annex-C(Vanadium)	-	10000	-
Annex-C(Copper)	-	10000	-
Annex-C(Molybdenum)	-	10000	-
Annex-C(Chromium)	-	10000	-
Annex-C(Nitrogen)	-	10000	-
Annex-C(Aluminium)	-	10000	-
Annex-C(Silicon)	-	10000	-
Annex-C(Manganese)	-	10000	-
Annex-C(Phosphorus)	-	10000	-
Annex-C(Sulphur)	-	10000	-
Annex-C(Carbon )	-	10000	-
Cl 11.4.2(overlap of Joint)	-	10000	-
Cl 11.4.1(Thickness of Joint)	-	10000	-
Cl 11.3(Location of joint)	-	10000	-
Cl 11.2(Number of Joint )	-	10000	-
Cl 11.1(General (Joint within a coil))	-	10000	-
Cl 10.3.4(Sheet)	-	10000	-
Cl 10.3.3(Sheet)	-	10000	-
Cl 10.3.2.5(Sheet)	-	10000	-
Cl 10.3.2.4(Sheet)	-	10000	-
Cl 10.3.2.3(Sheet)	-	10000	-
Cl 10.3.2.2(Sheet)	-	10000	-
Cl 10.3.2.1(Sheet)	-	10000	-
Cl 10.3.2(Sheet)	-	10000	-
Cl 10.3.1(Sheet)	-	10000	-
Cl 10.2.5(Coils)	-	10000	-
Cl 10.2.4(Coils)	-	10000	-
Cl 10.2.3(Coils)	-	10000	-
Cl 10.2.2(Coils)	-	10000	-
Cl 10.2.1(Coils)	-	10000	-
Cl 10(Tolerance on dimension and shape )	-	10000	-
Cl 9.3(Tensile requirement )	-	10000	-
Cl 9.2(Hardness requirement )	-	10000	-
Cl 8(Tin Coating mass )	-	10000	-
Cl 7.5(Imperfections)	-	10000	-
Cl 7.4(Passivation and oiling)	-	10000	-
Annex-C(Nickel)	-	0	-
Annex-C(Vanadium)	-	0	-
Annex-C(Copper)	-	0	-
Annex-C(Molybdenum)	-	0	-
Annex-C(Chromium)	-	0	-
Annex-C(Nitrogen)	-	0	-
Annex-C(Aluminium)	-	0	-
Annex-C(Silicon)	-	0	-
Annex-C(Manganese)	-	0	-
Annex-C(Phosphorus)	-	0	-
Annex-C(Sulphur)	-	0	-
Annex-C(Carbon )	-	0	-
Cl 11.4.2(overlap of Joint)	-	0	-
Cl 11.4.1(Thickness of Joint)	-	0	-
Cl 11.3(Location of joint)	-	0	-
Cl 11.2(Number of Joint )	-	0	-
Cl 11.1(General (Joint within a coil))	-	0	-
Cl 10.3.4(Sheet)	-	0	-
Cl 10.3.3(Sheet)	-	0	-
Cl 10.3.2.5(Sheet)	-	0	-
Cl 10.3.2.4(Sheet)	-	0	-
Cl 10.3.2.3(Sheet)	-	0	-
Cl 10.3.2.2(Sheet)	-	0	-
Cl 10.3.2.1(Sheet)	-	0	-
Cl 10.3.2(Sheet)	-	0	-
Cl 10.3.1(Sheet)	-	0	-
Cl 10.2.5(Coils)	-	0	-
Cl 10.2.4(Coils)	-	0	-
Cl 10.2.3(Coils)	-	0	-
Cl 10.2.2(Coils)	-	0	-
Cl 10.2.1(Coils)	-	0	-
Cl 10(Tolerance on dimension and shape )	-	0	-
Cl 9.3(Tensile requirement )	-	0	-
Cl 9.2(Hardness requirement )	-	0	-
Cl 8(Tin Coating mass )	-	0	-
Cl 7.5(Imperfections)	-	0	-
Annex-C(Nickel)	-	0	-
Annex-C(Vanadium)	-	0	-
Annex-C(Copper)	-	0	-
Annex-C(Molybdenum)	-	0	-
Annex-C(Chromium)	-	0	-
Annex-C(Nitrogen)	-	0	-
Annex-C(Aluminium)	-	0	-
Annex-C(Silicon)	-	0	-
Annex-C(Manganese)	-	0	-
Annex-C(Phosphorus)	-	0	-
Annex-C(Sulphur)	-	0	-
Annex-C(Carbon )	-	0	-
Cl 11.4.2(overlap of Joint)	-	0	-
Cl 11.4.1(Thickness of Joint)	-	0	-
Cl 11.3(Location of joint)	-	0	-
Cl 11.2(Number of Joint )	-	0	-
Cl 11.1(General (Joint within a coil))	-	0	-
Cl 10.3.4(Sheet)	-	0	-
Cl 10.3.3(Sheet)	-	0	-
Cl 10.3.2.5(Sheet)	-	0	-
Cl 10.3.2.4(Sheet)	-	0	-
Cl 10.3.2.3(Sheet)	-	0	-
Cl 10.3.2.2(Sheet)	-	0	-
Cl 10.3.2.1(Sheet)	-	0	-
Cl 10.3.2(Sheet)	-	0	-
Cl 10.3.1(Sheet)	-	0	-
Cl 10.2.5(Coils)	-	0	-
Cl 10.2.4(Coils)	-	0	-
Cl 10.2.3(Coils)	-	0	-
Cl 10.2.2(Coils)	-	0	-
Cl 10.2.1(Coils)	-	0	-
Cl 10(Tolerance on dimension and shape )	-	0	-
Cl 9.3(Tensile requirement )	-	0	-
Cl 9.2(Hardness requirement )	-	0	-
Cl 8(Tin Coating mass )	-	0	-
Cl 7.5(Imperfections)	-	0	-

-
Included w.e.f 11.07.2025

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number