BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15623 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

7591

EMC Testing and Compliance LLP, Gurugram

8141526

IS 15298 : part 4 (2024)

Personal Protective Equipment Part 4 Occupational Footwear (ISO 20347 : 2021, MOD) (Third Revision)

60000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.2(Design)	-	1000	-
Cl 5.2.2(" Height of upper ")	-	1000	-
Cl 5.2.3(Heel area)	-	1000	-
Cl 5.3.1.1(Construction of whole footwear)	-	1000	-
Cl 5.3.1.2(Upper/outsole bond strength)	-	1000	-
Cl 5.3.2(Leak proofness)	-	1000	-
Cl 5.3.3(Specific ergonomic features)	-	1000	-
Cl 5.3.4.2(Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution)	-	1000	-
Cl 5.3.5, Table no 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	1000	-
Cl 5.3.5, Table no 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	1000	-
Cl 5.3.5, Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	1000	-
Cl 5.3.5, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	1000	-
Cl 5.3.5, Table no 1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	1000	-
Cl 5.3.5, Table no1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	1000	-
Cl 5.3.5, Table no 1 of IS 17011 (vii)(Formaldehyde)	-	1000	-
Cl 5.3.5, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	1000	-
Cl 5.3.5, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	1000	-
Cl 5.3.5, Table no 1 of IS 17011 (x)(pH)	-	1000	-
Cl 5.3.5, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	1000	-
Cl 5.3.5, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	1000	-
Cl 5.3.6(Seam strength)	-	1000	-
Cl 5.3.7(Lead Content ( National Annex A))	-	1000	-
Cl 5.4.1.1(Class I footwear, determination of the area where upper requirements apply of Upper)	-	1000	-
Cl 5.4.1.2(Hybrid footwear, determination of the area where upper requirements apply of Upper)	-	1000	-
Cl 5.4.2(Thickness)	-	1000	-
Cl 5.4.3(Tear strength)	-	1000	-
Cl 5.4.4, Table 9(Tensile properties- Tensile strength)	-	1000	-
Cl 5.4.4, Table 9(Tensile properties- Breaking Force)	-	1000	-
Cl 5.4.4, Table 9(Tensile properties-Modulus at 100 % elongation)	-	1000	-
Cl 5.4.4, Table 9(Tensile properties- Elongation at break)	-	1000	-
Cl 5.4.5(Flexing resistance)	-	1000	-
Cl 5.4.6(Water vapour permeability and coefficient)	-	1000	-
Cl 5.4.7(Resistance to hydrolysis)	-	1000	-
Cl 5.5.2(Lining- Tear strength)	-	1000	-
Cl 5.5.3(Lining- Abrasion resistance)	-	1000	-
Cl 5.5.4(Lining-Water vapour permeability and coefficient)	-	1000	-
Cl 5.6.2(Tear strength of tongue)	-	1000	-
Cl 5.7.1(Thickness of Insole, insock and footbed)	-	1000	-
Cl 5.7.2(Water permeability of insock)	-	1000	-
Cl 5.7.3(Water absorption and desorption of Insole, insock and footbed)	-	1000	-
Cl 5.7.4.1(Abrasion resistance of Insoles)	-	1000	-
Cl 5.7.4.2(Abrasion resistance of Insocks)	-	1000	-
Cl 5.8.2.1(Thickness of Outsole)	-	1000	-
Cl 5.8.2.2(Cleated area)	-	1000	-
Cl 5.8.2.3(Cleat height)	-	1000	-
Cl 5.8.3(Outsole- Tear strength)	-	1000	-
Cl 5.8.4(Outsole- Abrasion resistance)	-	1000	-
Cl 5.8.5(Outsole-Flexing resistance)	-	1000	-
Cl 5.8.6(Outsole-Resistance to hydrolysis)	-	1000	-
Cl 5.8.7(Interlayer bond strength)	-	1000	-
Cl 6.2.1.1.2(Metallic perforation-resistant inserts (Type P))	-	1000	-
Cl 6.2.1.1.3(Non-metallic perforation-resistant inserts and insoles (Type PL))	-	1000	-
Cl 6.2.1.1.4(Non-metallic perforation-resistant inserts and insoles (Type PS))	-	1000	-
Cl 6.2.1.2(Construction of perforation resistant insert)	-	1000	-
Cl 6.2.1.3(Dimensions of perforation resistant insert)	-	1000	-
Cl 6.2.1.4.1(Flex resistance of perforation-resistant inserts)	-	1000	-
Cl 6.2.1.4.2.1(ISO 20344:2021, 5.11.2)	-	1000	-
Cl 6.2.1.4.2.2(ISO 20344:2021, 5.6.2.1)	-	1000	-
Cl 6.2.1.4.3(Stability against ageing and environmental influence of non-metallic perforationresistant inserts)	-	1000	-
Cl 6.2.2.1(Electrical properties of Partially conductive footwear)	-	1000	-
Cl 6.2.2.2(Electrical properties of Antistatic footwear)	-	1000	-
Cl 6.2.3.1(Heat insulation of outsole complex)	-	1000	-
Cl 6.2.3.2(Cold insulation of outsole complex)	-	1000	-
Cl 6.2.4(Energy absorption of seat region)	-	1000	-
Cl 6.2.5(Water resistance)	-	1000	-
Cl 6.2.6(Ankle protection)	-	1000	-
Cl 6.2.7.1(Cut resistance footwear- design)	-	1000	-
Cl 6.2.7.2(Dimensions and construction of protective area of Cut resistance footwear)	-	1000	-
Cl 6.2.7.3(Resistance to cutting)	-	1000	-
Cl 6.2.8(Scuff cap)	-	1000	-
Cl 6.2.9("Slip resistance on ceramic tile floor with glycerine ")	-	1000	-
Cl 6.3(Upper — Water penetration and absorption)	-	1000	-
Cl 6.4.1(Resistance to hot contact - Outsole)	-	1000	-
Cl 6.4.2(Resistance to fuel oil - Outsole)	-	1000	-
Cl 6.4.3.1(Mechanical properties of Ladder grip)	-	1000	-
Cl 6.4.3.2(Design of Ladder grip)	-	1000	-
Cl 6.4.3.3(Cleat height in the waist area of Ladder grip)	-	1000	-
Cl 6.4.3.4(Heel breast of Ladder grip)	-	1000	-
Cl 7("Marking ")	-	500	-
Cl 5.2(Design)	-	1000	-
Cl 5.2.2(" Height of upper ")	-	1000	-
Cl 5.2.3(Heel area)	-	1000	-
Cl 5.3.1.1(Construction of whole footwear)	-	1000	-
Cl 5.3.1.2(Upper/outsole bond strength)	-	1000	-
Cl 5.3.2(Leak proofness)	-	1000	-
Cl 5.3.3(Specific ergonomic features)	-	1000	-
Cl 5.3.4.2(Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution)	-	1000	-
Cl 5.3.5, Table no 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	1000	-
Cl 5.3.5, Table no 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	1000	-
Cl 5.3.5, Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	1000	-
Cl 5.3.5, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	1000	-
Cl 5.3.5, Table no 1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	1000	-
Cl 5.3.5, Table no1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	1000	-
Cl 5.3.5, Table no 1 of IS 17011 (vii)(Formaldehyde)	-	1000	-
Cl 5.3.5, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	1000	-
Cl 5.3.5, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	1000	-
Cl 5.3.5, Table no 1 of IS 17011 (x)(pH)	-	1000	-
Cl 5.3.5, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	1000	-
Cl 5.3.5, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	1000	-
Cl 5.3.6(Seam strength)	-	1000	-
Cl 5.3.7(Lead Content ( National Annex A))	-	1000	-
Cl 5.4.1.1(Class I footwear, determination of the area where upper requirements apply of Upper)	-	1000	-
Cl 5.4.1.2(Hybrid footwear, determination of the area where upper requirements apply of Upper)	-	1000	-
Cl 5.4.2(Thickness)	-	1000	-
Cl 5.4.3(Tear strength)	-	1000	-
Cl 5.4.4, Table 9(Tensile properties- Tensile strength)	-	1000	-
Cl 5.4.4, Table 9(Tensile properties- Breaking Force)	-	1000	-
Cl 5.4.4, Table 9(Tensile properties-Modulus at 100 % elongation)	-	1000	-
Cl 5.4.4, Table 9(Tensile properties- Elongation at break)	-	1000	-
Cl 5.4.5(Flexing resistance)	-	1000	-
Cl 5.4.6(Water vapour permeability and coefficient)	-	1000	-
Cl 5.4.7(Resistance to hydrolysis)	-	1000	-
Cl 5.5.2(Lining- Tear strength)	-	1000	-
Cl 5.5.3(Lining- Abrasion resistance)	-	1000	-
Cl 5.5.4(Lining-Water vapour permeability and coefficient)	-	1000	-
Cl 5.6.2(Tear strength of tongue)	-	1000	-
Cl 5.7.1(Thickness of Insole, insock and footbed)	-	1000	-
Cl 5.7.2(Water permeability of insock)	-	1000	-
Cl 5.7.3(Water absorption and desorption of Insole, insock and footbed)	-	1000	-
Cl 5.7.4.1(Abrasion resistance of Insoles)	-	1000	-
Cl 5.7.4.2(Abrasion resistance of Insocks)	-	1000	-
Cl 5.8.2.1(Thickness of Outsole)	-	1000	-
Cl 5.8.2.2(Cleated area)	-	1000	-
Cl 5.8.2.3(Cleat height)	-	1000	-
Cl 5.8.3(Outsole- Tear strength)	-	1000	-
Cl 5.8.4(Outsole- Abrasion resistance)	-	1000	-
Cl 5.8.5(Outsole-Flexing resistance)	-	1000	-
Cl 5.8.6(Outsole-Resistance to hydrolysis)	-	1000	-
Cl 5.8.7(Interlayer bond strength)	-	1000	-
Cl 6.2.1.1.2(Metallic perforation-resistant inserts (Type P))	-	1000	-
Cl 6.2.1.1.3(Non-metallic perforation-resistant inserts and insoles (Type PL))	-	1000	-
Cl 6.2.1.1.4(Non-metallic perforation-resistant inserts and insoles (Type PS))	-	1000	-
Cl 6.2.1.2(Construction of perforation resistant insert)	-	1000	-
Cl 6.2.1.3(Dimensions of perforation resistant insert)	-	1000	-
Cl 6.2.1.4.1(Flex resistance of perforation-resistant inserts)	-	1000	-
Cl 6.2.1.4.2.1(ISO 20344:2021, 5.11.2)	-	1000	-
Cl 6.2.1.4.2.2(ISO 20344:2021, 5.6.2.1)	-	1000	-
Cl 6.2.1.4.3(Stability against ageing and environmental influence of non-metallic perforationresistant inserts)	-	1000	-
Cl 6.2.2.1(Electrical properties of Partially conductive footwear)	-	1000	-
Cl 6.2.2.2(Electrical properties of Antistatic footwear)	-	1000	-
Cl 6.2.3.1(Heat insulation of outsole complex)	-	1000	-
Cl 6.2.3.2(Cold insulation of outsole complex)	-	1000	-
Cl 6.2.4(Energy absorption of seat region)	-	1000	-
Cl 6.2.5(Water resistance)	-	1000	-
Cl 6.2.6(Ankle protection)	-	1000	-
Cl 6.2.7.1(Cut resistance footwear- design)	-	1000	-
Cl 6.2.7.2(Dimensions and construction of protective area of Cut resistance footwear)	-	1000	-
Cl 6.2.7.3(Resistance to cutting)	-	1000	-
Cl 6.2.8(Scuff cap)	-	1000	-
Cl 6.2.9("Slip resistance on ceramic tile floor with glycerine ")	-	1000	-
Cl 6.3(Upper — Water penetration and absorption)	-	1000	-
Cl 6.4.1(Resistance to hot contact - Outsole)	-	1000	-
Cl 6.4.2(Resistance to fuel oil - Outsole)	-	1000	-
Cl 6.4.3.1(Mechanical properties of Ladder grip)	-	1000	-
Cl 6.4.3.2(Design of Ladder grip)	-	1000	-
Cl 6.4.3.3(Cleat height in the waist area of Ladder grip)	-	1000	-
Cl 6.4.3.4(Heel breast of Ladder grip)	-	1000	-
Cl 7("Marking ")	-	500	-

19 Jul, 2027

-
Included w.e.f 01.04.2025

7592

EMC Testing and Compliance LLP, Gurugram

8141526

IS 15298 : Part 3 (2024)

Personal Protective Equipment Part 3 Protective Footwear (ISO 20346 : 2021, MOD) (Third Revision)

60000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.2(Design)	-	1000	-
Cl 5.2.2(" Height of upper ")	-	1000	-
Cl 5.2.3(Heel area)	-	1000	-
Cl 5.3.1.1(Construction of whole footwear)	-	1000	-
Cl 5.3.1.2(Upper/outsole bond strength)	-	1000	-
Cl 5.3.2.1(Toe protection - general)	-	1000	-
Cl 5.3.2.2(Internal length)	-	1000	-
Cl 5.3.2.3(Width of toecap flange)	-	1000	-
Cl 5.3.2.4.1(Corrosion resistance of Class I footwear and hybrid mounted footwear)	-	1000	-
Cl 5.3.2.4.2(Corrosion resistance of Class II and hybrid moulded footwear)	-	1000	-
Cl 5.3.2.5(Behaviour of toecaps (thermal and chemical) of Corrosion resistance)	-	1000	-
Cl 5.3.2.6(Impact resistance)	-	1000	-
Cl 5.3.2.7(Compression resistance)	-	1000	-
Cl 5.3.3(Leak proofness)	-	1000	-
Cl 5.3.4("Specific ergonomic features ")	-	1000	-
Cl 5.3.5.2(Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution)	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (i)(Allergenic and carcinogenic disperse dyes)	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	1000	-
Cl 5.3.6, Table no1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (vii)(Formaldehyde)	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (x)(pH)	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	1000	-
Cl 5.3.6, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	1000	-
Cl 5.3.7(Seam strength)	-	1000	-
Cl 5.3.8(Lead Content ( National Annex A))	-	1000	-
Cl 5.4.1.1(Class I footwear, determination of the area where upper requirements apply of Upper)	-	1000	-
Cl 5.4.1.2(Hybrid footwear, determination of the area where upper requirements apply of Upper)	-	1000	-
Cl 5.4.2(Thickness)	-	1000	-
Cl 5.4.3(Tear strength)	-	1000	-
Cl 5.4.4, Table 11(Tensile properties- Tensile strength)	-	1000	-
Cl 5.4.4, Table 11(Tensile properties- Breaking Force)	-	1000	-
Cl 5.4.4, Table 11(Tensile properties-Modulus at 100 % elongation)	-	1000	-
Cl 5.4.4, Table 11(Tensile properties- Elongation at break)	-	1000	-
Cl 5.4.4, Table 11(Tensile properties- Elongation at break)	-	1000	-
Cl 5.4.6(Water vapour permeability and coefficient)	-	1000	-
Cl 5.4.7(Resistance to hydrolysis)	-	1000	-
Cl 5.5.2(Lining- Tear strength)	-	1000	-
Cl 5.5.3(Lining- Abrasion resistance)	-	1000	-
Cl 5.5.4(Lining-Water vapour permeability and coefficient)	-	1000	-
Cl 5.6.2(Tear strength of tongue)	-	1000	-
Cl 5.7.1(Thickness of Insole, insock and footbed)	-	1000	-
Cl 5.7.2(Water permeability of insock)	-	1000	-
Cl 5.7.3(Water absorption and desorption of Insole, insock and footbed)	-	1000	-
Cl 5.7.4.1(Abrasion resistance of Insoles)	-	1000	-
Cl 5.7.4.2(Abrasion resistance of Insocks)	-	1000	-
Cl 5.8.2.1(Thickness of Outsole)	-	1000	-
Cl 5.8.2.2(Cleated area)	-	1000	-
Cl 5.8.2.3(Cleat height)	-	1000	-
Cl 5.8.3(Outsole- Tear strength)	-	1000	-
Cl 5.8.4(Outsole- Abrasion resistance)	-	1000	-
Cl 5.8.5(Outsole-Flexing resistance)	-	1000	-
Cl 5.8.6(Outsole-Resistance to hydrolysis)	-	1000	-
Cl 5.8.7(Interlayer bond strength)	-	1000	-
Cl 6.2.1.1.2(Metallic perforation-resistant inserts (Type P))	-	1000	-
Cl 6.2.1.1.3(Non-metallic perforation-resistant inserts and insoles (Type PL))	-	1000	-
Cl 6.2.1.1.4(Non-metallic perforation-resistant inserts and insoles (Type PS))	-	1000	-
Cl 6.2.1.2(Construction of perforation resistant insert)	-	1000	-
Cl 6.2.1.3(Dimensions of perforation resistant insert)	-	1000	-
Cl 6.2.1.4.1(Flex resistance of perforation-resistant inserts)	-	1000	-
Cl 6.2.1.4.2.1(Corrosion resistance of perforation resistant metallic insert for Class I footwear and hybrid mounted footwear)	-	1000	-
Cl 6.2.1.4.2.2(Corrosion resistance of perforation resistant metallic insert for Class II footwear and hybrid moulded footwear)	-	1000	-
Cl 6.2.1.4.3(Stability against ageing and environmental influence of non-metallic perforationresistant inserts)	-	1000	-
Cl 6.2.2.1(Electrical properties of Partially conductive footwear)	-	1000	-
Cl 6.2.2.2(Electrical properties of Antistatic footwear)	-	1000	-
Cl 6.2.3.1(Heat insulation of outsole complex)	-	1000	-
Cl 6.2.3.2(Cold insulation of outsole complex)	-	1000	-
Cl 6.2.4(Energy absorption of seat region)	-	1000	-
Cl 6.2.5(Water resistance)	-	1000	-
Cl 6.2.6.1(Metatarsal protection - Construction)	-	1000	-
Cl 6.2.6.2("Metatarsal protection-Impact resistance of metatarsal protective device ")	-	1000	-
Cl 6.2.7(Ankle protection)	-	1000	-
Cl 6.2.8.2(Cut resistance footwear- design)	-	1000	-
Cl 6.2.8.2(Dimensions and construction of protective area of Cut resistance footwear)	-	1000	-
Cl 6.2.8.3(Resistance to cutting)	-	1000	-
Cl 6.2.9(Scuff cap)	-	1000	-
Cl 6.2.10("Slip resistance on ceramic tile floor with glycerine ")	-	1000	-
Cl 6.3(Upper — Water penetration and absorption)	-	1000	-
Cl 6.4.1(Resistance to hot contact - Outsole)	-	1000	-
Cl 6.4.2(Resistance to fuel oil - Outsole)	-	1000	-
Cl 6.4.3.1(Mechanical properties of Ladder grip)	-	1000	-
Cl 6.4.3.2(Design of Ladder grip)	-	1000	-
Cl 6.4.3.3(Cleat height in the waist area of Ladder grip)	-	1000	-
Cl 6.4.3.4(Heel breast of Ladder grip)	-	1000	-
Cl 7("Marking ")	-	1000	-
Cl 7("Marking ")	-	1000	-
Cl 5.2(Design)	-	-	-
Cl 5.2.2(" Height of upper ")	-	-	-
Cl 5.2.3(Heel area)	-	-	-
Cl 5.3.1.1(Construction of whole footwear)	-	-	-
Cl 5.3.1.2(Upper/outsole bond strength)	-	-	-
Cl 5.3.2.1(Toe protection - general)	-	-	-
Cl 5.3.2.2(Internal length)	-	-	-
Cl 5.3.2.3(Width of toecap flange)	-	-	-
Cl 5.3.2.4.1(Corrosion resistance of Class I footwear and hybrid mounted footwear)	-	-	-
Cl 5.3.2.4.2(Corrosion resistance of Class II and hybrid moulded footwear)	-	-	-
Cl 5.3.2.5(Behaviour of toecaps (thermal and chemical) of Corrosion resistance)	-	-	-
Cl 5.3.2.6(Impact resistance)	-	-	-
Cl 5.3.2.7(Compression resistance)	-	-	-
Cl 5.3.3(Leak proofness)	-	-	-
Cl 5.3.4("Specific ergonomic features ")	-	-	-
Cl 5.3.5.2(Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution)	-	-	-
Cl 5.3.6, Table no 1 of IS 17011 (i)(Allergenic and carcinogenic disperse dyes)	-	-	-
Cl 5.3.6, Table no 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	-	-
Cl 5.3.6, Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	-	-
Cl 5.3.6, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	-	-
Cl 5.3.6, Table no 1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	-	-
Cl 5.3.6, Table no1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	-	-
Cl 5.3.6, Table no 1 of IS 17011 (vii)(Formaldehyde)	-	-	-
Cl 5.3.6, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	-	-
Cl 5.3.6, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	-	-
Cl 5.3.6, Table no 1 of IS 17011 (x)(pH)	-	-	-
Cl 5.3.6, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	-	-
Cl 5.3.6, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	-	-
Cl 5.3.7(Seam strength)	-	-	-
Cl 5.3.8(Lead Content ( National Annex A))	-	-	-
Cl 5.4.1.1(Class I footwear, determination of the area where upper requirements apply of Upper)	-	-	-
Cl 5.4.1.2(Hybrid footwear, determination of the area where upper requirements apply of Upper)	-	-	-
Cl 5.4.2(Thickness)	-	-	-
Cl 5.4.3(Tear strength)	-	-	-
Cl 5.4.4, Table 11(Tensile properties- Tensile strength)	-	-	-
Cl 5.4.4, Table 11(Tensile properties- Breaking Force)	-	-	-
Cl 5.4.4, Table 11(Tensile properties-Modulus at 100 % elongation)	-	-	-
Cl 5.4.4, Table 11(Tensile properties- Elongation at break)	-	-	-
Cl 5.4.4, Table 11(Tensile properties- Elongation at break)	-	-	-
Cl 5.4.6(Water vapour permeability and coefficient)	-	-	-
Cl 5.4.7(Resistance to hydrolysis)	-	-	-
Cl 5.5.2(Lining- Tear strength)	-	-	-
Cl 5.5.3(Lining- Abrasion resistance)	-	-	-
Cl 5.5.4(Lining-Water vapour permeability and coefficient)	-	-	-
Cl 5.6.2(Tear strength of tongue)	-	-	-
Cl 5.7.1(Thickness of Insole, insock and footbed)	-	-	-
Cl 5.7.2(Water permeability of insock)	-	-	-
Cl 5.7.3(Water absorption and desorption of Insole, insock and footbed)	-	-	-
Cl 5.7.4.1(Abrasion resistance of Insoles)	-	-	-
Cl 5.7.4.2(Abrasion resistance of Insocks)	-	-	-
Cl 5.8.2.1(Thickness of Outsole)	-	-	-
Cl 5.8.2.2(Cleated area)	-	-	-
Cl 5.8.2.3(Cleat height)	-	-	-
Cl 5.8.3(Outsole- Tear strength)	-	-	-
Cl 5.8.4(Outsole- Abrasion resistance)	-	-	-
Cl 5.8.5(Outsole-Flexing resistance)	-	-	-
Cl 5.8.6(Outsole-Resistance to hydrolysis)	-	-	-
Cl 5.8.7(Interlayer bond strength)	-	-	-
Cl 6.2.1.1.2(Metallic perforation-resistant inserts (Type P))	-	-	-
Cl 6.2.1.1.3(Non-metallic perforation-resistant inserts and insoles (Type PL))	-	-	-
Cl 6.2.1.1.4(Non-metallic perforation-resistant inserts and insoles (Type PS))	-	-	-
Cl 6.2.1.2(Construction of perforation resistant insert)	-	-	-
Cl 6.2.1.3(Dimensions of perforation resistant insert)	-	-	-
Cl 6.2.1.4.1(Flex resistance of perforation-resistant inserts)	-	-	-
Cl 6.2.1.4.2.1(Corrosion resistance of perforation resistant metallic insert for Class I footwear and hybrid mounted footwear)	-	-	-
Cl 6.2.1.4.2.2(Corrosion resistance of perforation resistant metallic insert for Class II footwear and hybrid moulded footwear)	-	-	-
Cl 6.2.1.4.3(Stability against ageing and environmental influence of non-metallic perforationresistant inserts)	-	-	-
Cl 6.2.2.1(Electrical properties of Partially conductive footwear)	-	-	-
Cl 6.2.2.2(Electrical properties of Antistatic footwear)	-	-	-
Cl 6.2.3.1(Heat insulation of outsole complex)	-	-	-
Cl 6.2.3.2(Cold insulation of outsole complex)	-	-	-
Cl 6.2.4(Energy absorption of seat region)	-	-	-
Cl 6.2.5(Water resistance)	-	-	-
Cl 6.2.6.1(Metatarsal protection - Construction)	-	-	-
Cl 6.2.6.2("Metatarsal protection-Impact resistance of metatarsal protective device ")	-	-	-
Cl 6.2.7(Ankle protection)	-	-	-
Cl 6.2.8.2(Cut resistance footwear- design)	-	-	-
Cl 6.2.8.2(Dimensions and construction of protective area of Cut resistance footwear)	-	-	-
Cl 6.2.8.3(Resistance to cutting)	-	-	-
Cl 6.2.9(Scuff cap)	-	-	-
Cl 6.2.10("Slip resistance on ceramic tile floor with glycerine ")	-	-	-
Cl 6.3(Upper — Water penetration and absorption)	-	-	-
Cl 6.4.1(Resistance to hot contact - Outsole)	-	-	-
Cl 6.4.2(Resistance to fuel oil - Outsole)	-	-	-
Cl 6.4.3.1(Mechanical properties of Ladder grip)	-	-	-
Cl 6.4.3.2(Design of Ladder grip)	-	-	-
Cl 6.4.3.3(Cleat height in the waist area of Ladder grip)	-	-	-
Cl 6.4.3.4(Heel breast of Ladder grip)	-	-	-
Cl 7("Marking ")	-	-	-
Cl 7("Marking ")	-	-	-

19 Jul, 2027

-
Included w.e.f 01.04.2025

7593

DELHI TEST HOUSE, Azadhpur

8131406

IS 5986 (2017)

Hot rolled steel sheet, plate and strip for forming and flanging purposes - Specification (Fourth Revision)

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 11(Expansion Test)	-	500	NA
Cl 15(Length, Width & Thickness)	-	750	NA
7.1(Carbon %)	-	500	NA
7.1(Manganese %)	-	500	NA
7.1(Phosphorus %)	-	500	NA
7.1(Sulphur %)	-	500	NA
7.1(Silicon %)	-	500	NA
7.1( Copper %)	-	500	-
7.1( Aluminium %)	-	500	NA
7.1( Nb)	-	500	NA
7.1(V)	-	500	NA
7.1( Ti)	-	500	NA
7.1(Cr)	-	500	NA
7.1(Mo)	-	500	NA
7.1(Ni)	-	500	NA
7.1( Nitrogen%)	-	2000	NA
Cl. 16(Weight)	-	250	NA
Cl. 15(Thickness)	-	250	NA
Cl. 15(Width)	-	250	NA
Cl. 8.3, Table 6 & 7( Elongation at 5.65√A Gauge length)	-	1000	NA
Cl. 8.3, Table 6 & 7(Elongation at 80 mm gauge length)	-	1000	NA
Cl. 8.3, Table 6 & 7(Elongation at 50 mm gauge length)	-	1000	NA
Cl. 8.3, Table 6 & 7(Yield strength)	-	1000	NA
Cl 15(Length, Width & Thickness)	-	750	NA
Clauses 8.2, 8.3 and 8.3.1 & table 6 & 7(Tensile Strength)	-	1000	NA
Clauses 8.2, 8.3 and 8.3.1 & table 6 & 7(Yield Strength)	-	1000	NA
Clauses 8.2, 8.3 and 8.3.1 & table 6 & 7(Elongation)	-	1000	NA

17 Jun, 2027

-
-

7594

Indian Institute of Packaging (IIP), Delhi

8177901

IS 16709 (2017)

Textiles - Polypropylene (PP) woven, laminated, block bottom valve sacks for packaging of 50 kg cement - Specification

20475 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.1(Sack Length)	-	500	-
4.1.2(Sack Width)	-	0	-
4.1.3(Top Closure Width and Bottom Closure Width)	-	500	-
4.1.4(Patch Length)	-	500	-
4.1.5(Patch Height)	-	0	-
4.1.6(Length of Valve)	-	500	-
4.1.7(Width of Valve Sleeve)	-	0	-
4.1.8(Length of Valve Sleeve)	-	0	-
5.1(Raw Material)	-	2000	-
5.2(Fabric)	-	10400	CHARGES ARE INCLUSIVE OF FABRIC CONSTRUCTION ,SACKS CONSTRUCTION,TESTS AS PER 6192.
5.2(Tape density and width)	-	1200	CHARGES ARE INCLUSIVE TAPE DENSITY AND TAPE WIDTH.
5.4(Lamination for PP)	-	3500	CHARGES ARE INCLUSIVE IDENTIFICATION OF FILM AND OVERHUNG WIDTH.
5.4(Lamination for LDPE)	-	0	-
6.1(Mass of Bale)	-	500	-
6.2.1(Breaking Strength and Elongation at Break of Fabric)	-	2700	CHARGES ARE INCLUSIVE OF TESTING AND SPECIMEN CHARGES
6.2.2(Weld Strength of Top and Bottom Closures)	-	1600	CHARGES ARE INCLUSIVE OF TESTING AND SPECIMEN CHARGES
6.3(Drop Impact Testing of Filled Sacks)	-	1600	CHARGES ARE INCLUSIVE OF TESTING AND SPECIMEN CHARGES
6.4(Ash Content)	-	1200	-
Cl-5.6(Capacity)	-	500	-
Cl- 6.6, Table.-1 (ii)(Ends per dm)	-	500	-
Cl-6.6, Table-1 (iii)(Picks per dm)	-	0	-
Cl.6.6, Table-1 (vii)(Elongation at break of fabric)	-	800	-
6.5(Air Permeability)	-	1100	-

-
-

7595

DELHI TEST HOUSE, Azadhpur

8131406

IS 1239 : Part 1 (2004)

Steel Tubes, Tubulars and Other Wrought Steel Fittings : Part 1 Steel Tubes (BI-LINGUAL)

13500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12 AND AS PER IS 4736(UNIFORMITY OF ZINC COATING)	-	1000	NA
12 AND AS PER IS 4736(MASS OF ZINC COATING)	-	1000	NA
6.2 AND AS PER IS 513(NITROGEN)	-	2000	NA
6.2 AND AS PER IS 513(ALUMINIUM)	-	500	NA
6.2 AND AS PER IS 513(SILICON)	-	500	NA
6.2 AND AS PER IS 513(MANGANESE)	-	500	NA
6.2 AND AS PER IS 513(PHOSPHORUS)	-	500	NA
6.2 AND AS PER IS 513(SULPHUR)	-	500	NA
6.2 AND AS PER IS 513(CARBON)	-	500	NA
6.2 AND AS PER IS 10748(COPPER)	-	500	NA
6.1.1(MANGANESE)	-	500	NA
6.1.1(PHOSPHORUS)	-	500	NA
6.1.1(SULPHUR)	-	500	NA
6.1.1(CARBON)	-	500	NA
Cl. 6.1.1, table1 of IS 1239(Part1)(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	NA
Cl. 6.1.1, table1 of IS 1239(Part1)(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	NA
Cl. 6.1.1, table1 of IS 1239(Part1)(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	NA
Cl. 6.1.1, table1 of IS 1239(Part1)(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	NA
Cl. 15(Workmanship)	-	250	NA
Cl. 14.3(Flattening test (Over 50 mm NB))	-	500	NA
Cl. 14.1.1(Elongation)	-	1000	NA
Cl. 11(Length)	-	250	NA
Cl. 8, 9 Table 3,4 & 5(Thickness)	-	250	NA
Cl. 8 Table 3,4 & 5(Outside Diameter)	-	250	NA
Clause 14.1.1(Elongation Percent)	-	1000	NA
Clause 11.3(Approximate Length)	-	250	NA
Clause 11.2(Exact Length)	-	250	NA
Clause 11.1(Random Length)	-	250	NA
6.2(Carbon Equivalent as CE- IS:8811-98(RA12))	-	750	NA
Cl 8(Outer Diameter, Thickness & Mass)	-	1000	NA

17 Jun, 2027

-
-

7596

Indian Institute of Packaging (IIP), Delhi

8177901

IS 14968 (2015)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packing 50 Kg/25 kg sugar – Specification (first revision)

38005 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(TYPES)	-	0	-
4.1(Raw Material)	-	4200	CHARGES INCLUSIVE OF IDENTIFICATION AND OVERALL MIGRATION
4.2(Tapes – Width IS 6192 and IS 11197)	-	10100	CHARGES WAS FOR TAPE SPECIFICATION
4.2(Tapes – Linear Density )	-	700	-
4.2(Construction)	-	0	-
4.3(Sacks)	-	2000	-
4.3.1(Bottom Seam)	-	500	-
4.3.1(The two rows of stitches shall be separated from each other)	-	500	-
4.3.1( The outer stitch)	-	0	-
4.3.1( The stitching shall be done with double fold over seam to a depth )	-	0	-
4.3.1(Stitches pass through a minimum of six layers of the fabric. )	-	0	-
4.3.1(stitches/dm)	-	0	-
4.3.2(Mouth)	-	0	-
4.4(Liner IS 10146 or IS 10910.)	-	4900	-
4.4(Mass of the loose liner )	-	500	-
4.4(Width of the loose liner)	-	500	-
4.4(Length of the line)	-	0	-
4.4(Bottom seam of the loose liner)	-	0	-
4.4.1(Liner)	-	0	-
4.5 and Table 1 i(Capacity)	-	500	-
5.2 and Table 1 ii a(Dimensions Inside Length)	-	500	-
5.2 and Table 1 ii b(Dimensions Inside Width)	-	0	-
5.2 and Table 1 iii(Ends per dm )	-	500	-
5.2 and Table 1 iv(Picks per dm )	-	0	-
5.1 and Table 1 v a(Mass of unlaminated sack IS 1964)	-	500	-
5.1 and Table 1 v b(Mass of unlaminated sack with liner )	-	0	-
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise IS 1969 (Part 1))	-	1600	CHARGES INCLUSIVE OF TESTING AND SPECIMEN
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise IS 1969 (Part 1))	-	1100	-
5.2 and Table 1 vi(Breaking strength of bottom seam IS 9030 )	-	1600	CHARGES INCLUSIVE OF TESTING AND SPECIMEN
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise IS 1969 (Part 1))	-	0	-
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise IS 1969 (Part 1))	-	0	-
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	11780	CHARGES INCLUSIVE OF TESTING ,UV EXPOSURE AND SPECIMEN
5.2 and Table 1 x(Ash content )	-	1200	-
3(TYPES)	-	0	-
4.1(Raw Material)	-	0	-
4.2(Tapes – Width IS 6192 and IS 11197)	-	0	-
4.2(Tapes – Linear Density )	-	0	-
4.2(Construction)	-	0	-
4.3(Sacks)	-	0	-
4.3.1(Bottom Seam)	-	0	-
4.3.1(The two rows of stitches shall be separated from each other)	-	0	-
4.3.1( The outer stitch)	-	0	-
4.3.1( The stitching shall be done with double fold over seam to a depth )	-	0	-
4.3.1(Stitches pass through a minimum of six layers of the fabric. )	-	0	-
4.3.1(stitches/dm)	-	0	-
4.3.2(Mouth)	-	0	-
4.4(Liner IS 10146 or IS 10910.)	-	0	-
4.4(Mass of the loose liner )	-	0	-
4.4(Width of the loose liner)	-	0	-
4.4(Length of the line)	-	0	-
4.4(Bottom seam of the loose liner)	-	0	-
4.4.1(Liner)	-	0	-
4.5 and Table 1 i(Capacity)	-	0	-
5.2 and Table 1 ii a(Dimensions Inside Length)	-	0	-
5.2 and Table 1 ii b(Dimensions Inside Width)	-	0	-
5.2 and Table 1 iii(Ends per dm )	-	0	-
5.2 and Table 1 iv(Picks per dm )	-	0	-
5.1 and Table 1 v a(Mass of unlaminated sack IS 1964)	-	0	-
5.1 and Table 1 v b(Mass of unlaminated sack with liner )	-	0	-
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise IS 1969 (Part 1))	-	0	-
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise IS 1969 (Part 1))	-	0	-
5.2 and Table 1 vi(Breaking strength of bottom seam IS 9030 )	-	0	-
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise IS 1969 (Part 1))	-	0	-
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise IS 1969 (Part 1))	-	0	-
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	0	-
5.2 and Table 1 x(Ash content )	-	0	-

-
-

7597

DELHI TEST HOUSE, Azadhpur

8131406

IS 191 (2007)

Copper - Specification (Fourth Revision)

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1 - Table 4(Copper + Silver(By difference)-IS440)	-	500	NA
7.1 - Table 4(Silver- IS 440)	-	500	NA
7.1 - Table 4(Copper (any Silver present to be counted as copper)-IS440)	-	1700	NA
7.1 - Table 4(Phosphorus- IS 440)	-	500	NA
7.1 - Table 4(Arsenic- IS440)	-	500	NA
7.1 - Table 4(Antimony-IS440)	-	500	NA
7.1 - Table 4(Bismuth-IS 440)	-	500	NA
7.1 - Table 4(Iron IS 440)	-	500	NA
7.1 - Table 4(Lead IS 440)	-	500	NA
7.1 - Table 4(Nickel IS 440)	-	500	NA
7.1 - Table 4(Oxygen IS 440)	-	500	NA
7.1 - Table 4(Selenium - IS 440)	-	500	NA
7.1 - Table 4(Tellurium- IS 440)	-	500	NA
7.1 - Table 4(Tin - IS 440)	-	500	NA
7.1 - Table 4(Znic-IS 440)	-	500	NA
7.1 - Table 4(Selenium + Telluuium- IS 440)	-	1000	NA
7.1 - Table 4(Total Impurities- IS 440)	-	250	NA
7.1 - Table 4(Sulphur- IS 440)	-	500	NA
8.1(FREEDOM FROM DEFECTS)	-	250	NA
8.2(FREEDOM FROM DEFECTS)	-	250	NA
9.1- Table 5(Mass Resistivity- IS 3635)	-	2000	NA
8.1(FREEDOM FROM DEFECTS)	-	250	NA
8.2(FREEDOM FROM DEFECTS)	-	250	NA
7.1 - Table 4(Silver- IS 440)	-	200	NA

17 Jun, 2027

-
-

7598

VERTEX TESTING LABORATORY PRIVATE LIMITED, GHAZIABAD

8185906

IS 15658 (2021)

Concrete Paving Blocks - Specification ( First Revision )

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 50 cycles)	-	5000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 25 cycles)	-	5000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 10 cycles)	-	5000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Cumulative Weight losses of specimen after 10, 25 & 50 cycles)	-	5000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 50 cycles)	-	5000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 25 cycles)	-	5000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 10 cycles)	-	5000	-
Clause 7.3, Annex G(Average Breaking Load)	-	400	-
Clause 7.3, Annex G(Individual Breaking Load)	-	400	-
Clause 7.3, Annex F(Average Failure Load per unit Length)	-	400	-
Clause 7.3, Annex F(Individual Failure Load per unit Length)	-	400	-
Clause 7.3 & 9.1.4, Table 3, SI No. (v) b)(Average Flexural strength )	-	1000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (v) a)(Indivdual Flexural strength (i))	-	1000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) b)(Average Tensile splitting strength )	-	1000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) a)(Indivdual Tensile splitting strength (i))	-	1000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) ii)(Wet Abrasion resistance (Average of three test specimens))	-	1900	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) i)( Indivdual Wet Abrasion Resistance )	-	1900	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) ii)(Dry Abrasion resistance (Average of three test specimens))	-	1900	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) i)( Indivdual Dry Abrasion Resistance )	-	1900	-
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) b)(Compressive strength (Average of eight test specimens))	-	2000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) a)(Indivdual Compressive strength (i))	-	2000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (i) b)(Water absorption (Average of three test specimens))	-	1800	-
Clause 7.3 & 9.1.4, Table 3, SI No. (i) a)( Indivdual Water absorption)	-	1800	-
Clause 7.2 & 9.1.3, Table 2, SI No. (ix)(Deviation from squareness)	-	400	-
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Indivdual Ratio of wearing face area and Plan area (Asw/Asp))	-	400	-
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Ratio of wearing face area and Plan area (Asw/Asp))	-	400	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Indivdual Plan Area (Asp))	-	400	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Plan Area (Asp))	-	400	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Indivdual Thickness of wearing Layer)	-	400	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Thickness of wearing Layer)	-	400	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Depth)	-	400	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Depth)	-	400	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Width)	-	400	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Width)	-	400	-
Clause 7.2, Table No. 2, SI No. (iv) (Indivdual Aspect Ratio, L/Th)	-	200	-
Clause 7.2, Table No. 2, SI No. (iv) (Aspect Ratio, L/Th)	-	200	-
Clause 7.2, Table No. 2, SI No. (iii) (Indivdual Thickness, Th)	-	400	-
Clause 7.2, Table No. 2, SI No. (iii) (Thickness, Th)	-	400	-
Clause 7.2, Table No. 2, SI No. (ii) (Indivdual Length, L)	-	400	-
Clause 7.2, Table No. 2, SI No. (ii) (Length, L)	-	400	-
Clause 7.2, Table No. 2, SI No. (i) (Indivdual Width, W)	-	400	-
Clause 7.2, Table No. 2, SI No. (i) (Width, W)	-	400	-
Clause 6.3 (Bonding and Delamination between the layers of paver blocks)	-	400	-
Clause 7.1.3 (Colour and Texture)	-	200	-
Clauses 7.1.2 & 9.1.2 (Visual Inspection)	-	200	-
Clause 7.1.1 (General Quality)	-	200	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Individual Width - Lower)	-	200	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Average Width -Lower)	-	200	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Individual Width - Higher)	-	200	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Average Width -Higher)	-	200	-
Clause 3.20(Spacer nibs)	-	400	-
10(Marking)	-	0	-
cl.5(Cement)	-	0	-
5.2(Mineral Admixture)	-	0	-
5.3(Chemical Admixtures)	-	0	-
5.4(Coarse and Fine Aggregates)	-	0	-
5.5(Pigments)	-	0	-
5.6(Water)	-	0	-

23 May, 2028

-
Except freeze thaw durability (Optional test)

7599

Gravitas Laboratories Private Limited, Greater Noida

8182606

IS 1897 (2008)

Copper strip for electrical purposes - Specification (Third Revision)

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
CLAUSE 6(CHEMICAL COMPOSITION)	-	3500	-
CLAUSE 8(MECHANICAL PROPERTIES)	-	3000	-
CLAUSE 8.2(Bend Test)	-	1200	-
CLAUSE 9(ELECTRICAL RESISTIVITY TEST)	-	3000	-
CLAUSE 11(DlMENSIONS AND TOLERANCES)	-	800	-
CLAUSE 13(RETEST)	-	1500	-
Cl. 8.3(Edgewise bending,)	-	1000	-
Cl. 8.3(Thickness)	-	500	-
Cl. 8.3(Tensile)	-	1000	-
Cl. 8.3(Elongation)	-	1000	-
Cl. 8.3(Hardness)	-	1500	-

-
-

7600

Interstellar Testing Centre Pvt. Ltd. (A group company of Qualitek Labs Limited), Panchkula

9108716

IS 13428 (2024)

PACKAGED NATURAL MINERAL WATER - SPECIFICATION Third Revision

11800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.2/Table 1/i(Colour)	-	50	GST Extra as applicable
6.2/Table 1/ii(Odour)	-	50	GST Extra as applicable
6.2/Table 1/iii(Taste)	-	50	GST Extra as applicable
6.2/Table 1/iv(Turbidity)	-	50	GST Extra as applicable
6.2/Table 1/v(Total Dissoved)	-	500	GST Extra as applicable
6.2/Table 1/vi(pH Value)	-	50	GST Extra as applicable
6.2/Table 2/i(Nitrate)	-	50	GST Extra as applicable
6.2/Table 2/ii(Nitrite)	-	50	GST Extra as applicable
6.2/Table 2/iii(Sulphide)	-	50	GST Extra as applicable
6.2/Table 2/iv(Manganese)	-	50	GST Extra as applicable
6.2/Table 2/v(Copper)	-	50	GST Extra as applicable
6.2/Table 2/vi(Fluoride)	-	50	GST Extra as applicable
6.2/Table 2/vii(Barium)	-	50	GST Extra as applicable
6.2/Table 2/viii(Antimony)	-	100	GST Extra as applicable
6.2/Table 2/ix(Borate)	-	50	GST Extra as applicable
6.2/Table 2/x(Silver)	-	50	GST Extra as applicable
6.2/Table 2/xi(Chloride)	-	50	GST Extra as applicable
6.2/Table 2/xii(Sulphate)	-	100	GST Extra as applicable
6.2/Table 2/xiii(Magnesium)	-	100	GST Extra as applicable
6.2/Table 2/xiv(Calcium)	-	100	GST Extra as applicable
6.2/Table 2/xv(Sodium)	-	50	GST Extra as applicable
6.2/Table 2/xvi(Alkalinity)	-	50	GST Extra as applicable
6.2/Table 2/xvii(Selenium)	-	80	GST Extra as applicable
6.2/Table 2/xviii(Mineral Oil)	-	400	GST Extra as applicable
6.2/Table 2/xix(Phenolic Compounds)	-	200	GST Extra as applicable
6.2/Table 2/xx(Anionic Surface active agents)	-	550	GST Extra as applicable
6.2/Table 3/i(Arsenic)	-	500	GST Extra as applicable
6.2/Table 3/ii(Cadmium)	-	400	GST Extra as applicable
6.2/Table 3/iii(Cyanide)	-	300	GST Extra as applicable
6.2/Table 3/iv(Chromium)	-	250	GST Extra as applicable
6.2/Table 3/v(Mercury)	-	400	GST Extra as applicable
6.2/Table 3/vi(Lead)	-	200	GST Extra as applicable
6.2/Table 3/vii(Nickel)	-	200	GST Extra as applicable
6.2/Table 3/x(Uranium)	-	200	GST Extra as applicable
Cl- 6.3, Annex N (i)(P,P- DDT)	-	30	GST Extra as applicable
Cl- 6.3, Annex N (i)(O,P -DDT)	-	30	GST Extra as applicable
Cl- 6.3, Annex N (i)(O,P -DDE)	-	35	GST Extra as applicable
Cl- 6.3, Annex N (i)(P,P -DDE)	-	35	GST Extra as applicable
Cl-6.3, Annex N (i)(O,P-DDD)	-	35	GST Extra as applicable
Cl-6.3, Annex N (i)(P,P- DDD)	-	35	GST Extra as applicable
Cl- 6.3, Annex N (ii)(γ-HCH (lindane))	-	200	GST Extra as applicable
Cl- 6.3, Annex N (iii)(α-HCH)	-	70	GST Extra as applicable
Cl- 6.3, Annex N (iii)(β-HCH)	-	70	GST Extra as applicable
Cl- 6.3, Annex N (iii)(δ - HCH)	-	60	GST Extra as applicable
Cl- 6.3, Annex N (iv)(Endosulfan - α)	-	130	GST Extra as applicable
Cl- 6.3, Annex N (iv)(Endosulfan - β)	-	120	GST Extra as applicable
Cl- 6.3, Annex N (iv)(Endosulfan - sulphate)	-	120	GST Extra as applicable
Cl- 6.3, Annex N (v)(Monocrotophos)	-	400	GST Extra as applicable
Cl- 6.3, Annex N (vi)(Ethion)	-	200	GST Extra as applicable
Cl- 6.3, Annex N (vii)(Chlorpyrifos)	-	200	GST Extra as applicable
Cl- 6.3, Annex N (viii)(phorate sulphoxide)	-	70	GST Extra as applicable
Cl- 6.3, Annex N (viii)(phorate sulphone)	-	70	GST Extra as applicable
Cl- 6.3, Annex N (ix)(2,4-D)	-	200	GST Extra as applicable
Cl- 6.3, Annex N (x)(Butachlor)	-	200	GST Extra as applicable
Cl- 6.3, Annex N (xi)(Isoproturon)	-	200	GST Extra as applicable
Cl- 6.3, Annex N (xii)(Alachlor)	-	200	GST Extra as applicable
Cl- 6.3, Annex N (xiii)(Atrazine)	-	200	GST Extra as applicable
Cl- 6.3, Annex N (xiv)(Methyl parathion)	-	100	GST Extra as applicable
Cl- 6.3, Annex N (xiv)(Methyl paraoxon)	-	100	GST Extra as applicable
Cl- 6.3, Annex N (xv)(Malathion)	-	100	GST Extra as applicable
Cl- 6.3, Annex N (xv)(malaoxon)	-	100	GST Extra as applicable
Cl- 6.3, Annex N (xvi)(Aldrin)	-	100	GST Extra as applicable
Cl-6.3, Annex N (XVI)(Dieldrin)	-	100	GST Extra as applicable
6.1.1(Escherichia coli)	-	200	GST Extra as applicable
6.1.2(Coliform)	-	200	GST Extra as applicable
6.1.3(Faecal Streptococci)	-	100	GST Extra as applicable
Cl-6.1.3(Staphylococcus aureus)	-	100	GST Extra as applicable
6.1.4(Sulphite Reducing Anaerobe)	-	200	GST Extra as applicable
6.1.5(Pseudomonas aeruginosa)	-	200	GST Extra as applicable
6.1.6(Yeast and moould)	-	200	GST Extra as applicable
6.1.7(Salmonella)	-	200	GST Extra as applicable
6.1.8(Vibrio Cholera)	-	200	GST Extra as applicable
Cl-6.1.7(Shigella)	-	200	GST Extra as applicable
Cl-6.1.8(V. parahaemolyticus)	-	200	GST Extra as applicable
6.2/Table 3/viii(Polychlorinated biphenyle (PCB))	-	400	GST Extra as applicable
6.2/Table 3/ix(Polynuclear aromatic hydrocarbons)	-	400	GST Extra as applicable
Cl- 6.3, Annex N (viii)(Phorate and its oxygen analogue)	-	60	GST Extra as applicable
6.2/Table 1/i(Colour)	-	0	Repeat Test
6.2/Table 1/ii(Odour)	-	0	Repeat Test
6.2/Table 1/iii(Taste)	-	0	Repeat Test
6.2/Table 1/iv(Turbidity)	-	0	Repeat Test
6.2/Table 1/v(Total Dissoved)	-	0	Repeat Test
6.2/Table 1/vi(pH Value)	-	0	Repeat Test
6.2/Table 2/i(Nitrate)	-	0	Repeat Test
6.2/Table 2/ii(Nitrite)	-	0	Repeat Test
6.2/Table 2/iii(Sulphide)	-	0	Repeat Test
6.2/Table 2/iv(Manganese)	-	0	Repeat Test
6.2/Table 2/v(Copper)	-	0	Repeat Test
6.2/Table 2/vi(Fluoride)	-	0	Repeat Test
6.2/Table 2/vii(Barium)	-	0	Repeat Test
6.2/Table 2/viii(Antimony)	-	0	Repeat Test
6.2/Table 2/ix(Borate)	-	0	Repeat Test
6.2/Table 2/x(Silver)	-	0	Repeat Test
6.2/Table 2/xi(Chloride)	-	0	Repeat Test
6.2/Table 2/xii(Sulphate)	-	0	Repeat Test
6.2/Table 2/xiii(Magnesium)	-	0	Repeat Test
6.2/Table 2/xiv(Calcium)	-	0	Repeat Test
6.2/Table 2/xv(Sodium)	-	0	Repeat Test
6.2/Table 2/xvi(Alkalinity)	-	0	Repeat Test
6.2/Table 2/xvii(Selenium)	-	0	Repeat Test
6.2/Table 2/xviii(Mineral Oil)	-	0	Repeat Test
6.2/Table 2/xix(Phenolic Compounds)	-	0	Repeat Test
6.2/Table 2/xx(Anionic Surface active agents)	-	0	Repeat Test
6.2/Table 3/i(Arsenic)	-	0	Repeat Test
6.2/Table 3/ii(Cadmium)	-	0	Repeat Test
6.2/Table 3/iii(Cyanide)	-	0	Repeat Test
6.2/Table 3/iv(Chromium)	-	0	Repeat Test
6.2/Table 3/v(Mercury)	-	0	Repeat Test
6.2/Table 3/vi(Lead)	-	0	Repeat Test
6.2/Table 3/vii(Nickel)	-	0	Repeat Test
6.2/Table 3/x(Uranium)	-	0	Repeat Test
Cl- 6.3, Annex N (i)(P,P- DDT)	-	0	Repeat Test
Cl- 6.3, Annex N (i)(O,P -DDT)	-	0	Repeat Test
Cl- 6.3, Annex N (i)(O,P -DDE)	-	0	Repeat Test
Cl- 6.3, Annex N (i)(P,P -DDE)	-	0	Repeat Test
Cl-6.3, Annex N (i)(O,P-DDD)	-	0	Repeat Test
Cl-6.3, Annex N (i)(P,P- DDD)	-	0	Repeat Test
Cl- 6.3, Annex N (ii)(γ-HCH (lindane))	-	0	Repeat Test
Cl- 6.3, Annex N (iii)(α-HCH)	-	0	Repeat Test
Cl- 6.3, Annex N (iii)(β-HCH)	-	0	Repeat Test
Cl- 6.3, Annex N (iii)(δ - HCH)	-	0	Repeat Test
Cl- 6.3, Annex N (iv)(Endosulfan - α)	-	0	Repeat Test
Cl- 6.3, Annex N (iv)(Endosulfan - β)	-	0	Repeat Test
Cl- 6.3, Annex N (iv)(Endosulfan - sulphate)	-	0	Repeat Test
Cl- 6.3, Annex N (v)(Monocrotophos)	-	0	Repeat Test
Cl- 6.3, Annex N (vi)(Ethion)	-	0	Repeat Test
Cl- 6.3, Annex N (vii)(Chlorpyrifos)	-	0	Repeat Test
Cl- 6.3, Annex N (viii)(phorate sulphoxide)	-	0	Repeat Test
Cl- 6.3, Annex N (viii)(phorate sulphone)	-	0	Repeat Test
Cl- 6.3, Annex N (ix)(2,4-D)	-	0	Repeat Test
Cl- 6.3, Annex N (x)(Butachlor)	-	0	Repeat Test
Cl- 6.3, Annex N (xi)(Isoproturon)	-	0	Repeat Test
Cl- 6.3, Annex N (xii)(Alachlor)	-	0	Repeat Test
Cl- 6.3, Annex N (xiii)(Atrazine)	-	0	Repeat Test
Cl- 6.3, Annex N (xiv)(Methyl parathion)	-	0	Repeat Test
Cl- 6.3, Annex N (xiv)(Methyl paraoxon)	-	0	Repeat Test
Cl- 6.3, Annex N (xv)(Malathion)	-	0	Repeat Test
Cl- 6.3, Annex N (xv)(malaoxon)	-	0	Repeat Test
Cl- 6.3, Annex N (xvi)(Aldrin)	-	0	Repeat Test
Cl-6.3, Annex N (XVI)(Dieldrin)	-	0	Repeat Test
6.1.1(Escherichia coli)	-	0	Repeat Test
6.1.2(Coliform)	-	0	Repeat Test
6.1.3(Faecal Streptococci)	-	0	Repeat Test
Cl-6.1.3(Staphylococcus aureus)	-	0	Repeat Test
6.1.4(Sulphite Reducing Anaerobe)	-	0	Repeat Test
6.1.5(Pseudomonas aeruginosa)	-	0	Repeat Test
6.1.6(Yeast and moould)	-	0	Repeat Test
6.1.7(Salmonella)	-	0	Repeat Test
6.1.8(Vibrio Cholera)	-	0	Repeat Test
Cl-6.1.7(Shigella)	-	0	Repeat Test
Cl-6.1.8(V. parahaemolyticus)	-	0	Repeat Test
6.2/Table 3/viii(Polychlorinated biphenyle (PCB))	-	0	Repeat Test
6.2/Table 3/ix(Polynuclear aromatic hydrocarbons)	-	0	Repeat Test
Cl- 6.3, Annex N (viii)(Phorate and its oxygen analogue)	-	0	Repeat Test
6.2/Table 1/i(Colour)	-	0	Repeat Test
6.2/Table 1/ii(Odour)	-	0	Repeat Test
6.2/Table 1/iii(Taste)	-	0	Repeat Test
6.2/Table 1/iv(Turbidity)	-	0	Repeat Test
6.2/Table 1/v(Total Dissoved)	-	0	Repeat Test
6.2/Table 1/vi(pH Value)	-	0	Repeat Test
6.2/Table 2/i(Nitrate)	-	0	Repeat Test
6.2/Table 2/ii(Nitrite)	-	0	Repeat Test
6.2/Table 2/iii(Sulphide)	-	0	Repeat Test
6.2/Table 2/iv(Manganese)	-	0	Repeat Test
6.2/Table 2/v(Copper)	-	0	Repeat Test
6.2/Table 2/vi(Fluoride)	-	0	Repeat Test
6.2/Table 2/vii(Barium)	-	0	Repeat Test
6.2/Table 2/viii(Antimony)	-	0	Repeat Test
6.2/Table 2/ix(Borate)	-	0	Repeat Test
6.2/Table 2/x(Silver)	-	0	Repeat Test
6.2/Table 2/xi(Chloride)	-	0	Repeat Test
6.2/Table 2/xii(Sulphate)	-	0	Repeat Test
6.2/Table 2/xiii(Magnesium)	-	0	Repeat Test
6.2/Table 2/xiv(Calcium)	-	0	Repeat Test
6.2/Table 2/xv(Sodium)	-	0	Repeat Test
6.2/Table 2/xvi(Alkalinity)	-	0	Repeat Test
6.2/Table 2/xvii(Selenium)	-	0	Repeat Test
6.2/Table 2/xviii(Mineral Oil)	-	0	Repeat Test
6.2/Table 2/xix(Phenolic Compounds)	-	0	Repeat Test
6.2/Table 2/xx(Anionic Surface active agents)	-	0	Repeat Test
6.2/Table 3/i(Arsenic)	-	0	Repeat Test
6.2/Table 3/ii(Cadmium)	-	0	Repeat Test
6.2/Table 3/iii(Cyanide)	-	0	Repeat Test
6.2/Table 3/iv(Chromium)	-	0	Repeat Test
6.2/Table 3/v(Mercury)	-	0	Repeat Test
6.2/Table 3/vi(Lead)	-	0	Repeat Test
6.2/Table 3/vii(Nickel)	-	0	Repeat Test
6.2/Table 3/x(Uranium)	-	0	Repeat Test
Cl- 6.3, Annex N (i)(P,P- DDT)	-	0	Repeat Test
Cl- 6.3, Annex N (i)(O,P -DDT)	-	0	Repeat Test
Cl- 6.3, Annex N (i)(O,P -DDE)	-	0	Repeat Test
Cl- 6.3, Annex N (i)(P,P -DDE)	-	0	Repeat Test
Cl-6.3, Annex N (i)(O,P-DDD)	-	0	Repeat Test
Cl-6.3, Annex N (i)(P,P- DDD)	-	0	Repeat Test
Cl- 6.3, Annex N (ii)(γ-HCH (lindane))	-	0	Repeat Test
Cl- 6.3, Annex N (iii)(α-HCH)	-	0	Repeat Test
Cl- 6.3, Annex N (iii)(β-HCH)	-	0	Repeat Test
Cl- 6.3, Annex N (iii)(δ - HCH)	-	0	Repeat Test
Cl- 6.3, Annex N (iv)(Endosulfan - α)	-	0	Repeat Test
Cl- 6.3, Annex N (iv)(Endosulfan - β)	-	0	Repeat Test
Cl- 6.3, Annex N (iv)(Endosulfan - sulphate)	-	0	Repeat Test
Cl- 6.3, Annex N (v)(Monocrotophos)	-	0	Repeat Test
Cl- 6.3, Annex N (vi)(Ethion)	-	0	Repeat Test
Cl- 6.3, Annex N (vii)(Chlorpyrifos)	-	0	Repeat Test
Cl- 6.3, Annex N (viii)(phorate sulphoxide)	-	0	Repeat Test
Cl- 6.3, Annex N (viii)(phorate sulphone)	-	0	Repeat Test
Cl- 6.3, Annex N (ix)(2,4-D)	-	0	Repeat Test
Cl- 6.3, Annex N (x)(Butachlor)	-	0	Repeat Test
Cl- 6.3, Annex N (xi)(Isoproturon)	-	0	Repeat Test
Cl- 6.3, Annex N (xii)(Alachlor)	-	0	Repeat Test
Cl- 6.3, Annex N (xiii)(Atrazine)	-	0	Repeat Test
Cl- 6.3, Annex N (xiv)(Methyl parathion)	-	0	Repeat Test
Cl- 6.3, Annex N (xiv)(Methyl paraoxon)	-	0	Repeat Test
Cl- 6.3, Annex N (xv)(Malathion)	-	0	Repeat Test
Cl- 6.3, Annex N (xv)(malaoxon)	-	0	Repeat Test
Cl- 6.3, Annex N (xvi)(Aldrin)	-	0	Repeat Test
Cl-6.3, Annex N (XVI)(Dieldrin)	-	0	Repeat Test
6.1.1(Escherichia coli)	-	0	Repeat Test
6.1.2(Coliform)	-	0	Repeat Test
6.1.3(Faecal Streptococci)	-	0	Repeat Test
Cl-6.1.3(Staphylococcus aureus)	-	0	Repeat Test
6.1.4(Sulphite Reducing Anaerobe)	-	0	Repeat Test
6.1.5(Pseudomonas aeruginosa)	-	0	Repeat Test
6.1.6(Yeast and moould)	-	0	Repeat Test
6.1.7(Salmonella)	-	0	Repeat Test
6.1.8(Vibrio Cholera)	-	0	Repeat Test
Cl-6.1.7(Shigella)	-	0	Repeat Test
Cl-6.1.8(V. parahaemolyticus)	-	0	Repeat Test
6.2/Table 3/viii(Polychlorinated biphenyle (PCB))	-	0	Repeat Test
6.2/Table 3/ix(Polynuclear aromatic hydrocarbons)	-	0	Repeat Test
Cl- 6.3, Annex N (viii)(Phorate and its oxygen analogue)	-	0	Repeat Test
6.2/Table 1/i(Colour)	-	0	Repeat Test
6.2/Table 1/ii(Odour)	-	0	Repeat Test
6.2/Table 1/iii(Taste)	-	0	Repeat Test
6.2/Table 1/iv(Turbidity)	-	0	Repeat Test
6.2/Table 1/v(Total Dissoved)	-	0	Repeat Test
6.2/Table 1/vi(pH Value)	-	0	Repeat Test
6.2/Table 2/i(Nitrate)	-	0	Repeat Test
6.2/Table 2/ii(Nitrite)	-	0	Repeat Test
6.2/Table 2/iii(Sulphide)	-	0	Repeat Test
6.2/Table 2/iv(Manganese)	-	0	Repeat Test
6.2/Table 2/v(Copper)	-	0	Repeat Test
6.2/Table 2/vi(Fluoride)	-	0	Repeat Test
6.2/Table 2/vii(Barium)	-	0	Repeat Test
6.2/Table 2/viii(Antimony)	-	0	Repeat Test
6.2/Table 2/ix(Borate)	-	0	Repeat Test
6.2/Table 2/x(Silver)	-	0	Repeat Test
6.2/Table 2/xi(Chloride)	-	0	Repeat Test
6.2/Table 2/xii(Sulphate)	-	0	Repeat Test
6.2/Table 2/xiii(Magnesium)	-	0	Repeat Test
6.2/Table 2/xiv(Calcium)	-	0	Repeat Test
6.2/Table 2/xv(Sodium)	-	0	Repeat Test
6.2/Table 2/xvi(Alkalinity)	-	0	Repeat Test
6.2/Table 2/xvii(Selenium)	-	0	Repeat Test
6.2/Table 2/xviii(Mineral Oil)	-	0	Repeat Test
6.2/Table 2/xix(Phenolic Compounds)	-	0	Repeat Test
6.2/Table 2/xx(Anionic Surface active agents)	-	0	Repeat Test
6.2/Table 3/i(Arsenic)	-	0	Repeat Test
6.2/Table 3/ii(Cadmium)	-	0	Repeat Test
6.2/Table 3/iii(Cyanide)	-	0	Repeat Test
6.2/Table 3/iv(Chromium)	-	0	Repeat Test
6.2/Table 3/v(Mercury)	-	0	Repeat Test
6.2/Table 3/vi(Lead)	-	0	Repeat Test
6.2/Table 3/vii(Nickel)	-	0	Repeat Test
6.2/Table 3/x(Uranium)	-	0	Repeat Test
Cl- 6.3, Annex N (i)(P,P- DDT)	-	0	Repeat Test
Cl- 6.3, Annex N (i)(O,P -DDT)	-	0	Repeat Test
Cl- 6.3, Annex N (i)(O,P -DDE)	-	0	Repeat Test
Cl- 6.3, Annex N (i)(P,P -DDE)	-	0	Repeat Test
Cl-6.3, Annex N (i)(O,P-DDD)	-	0	Repeat Test
Cl-6.3, Annex N (i)(P,P- DDD)	-	0	Repeat Test
Cl- 6.3, Annex N (ii)(γ-HCH (lindane))	-	0	Repeat Test
Cl- 6.3, Annex N (iii)(α-HCH)	-	0	Repeat Test
Cl- 6.3, Annex N (iii)(β-HCH)	-	0	Repeat Test
Cl- 6.3, Annex N (iii)(δ - HCH)	-	0	Repeat Test
Cl- 6.3, Annex N (iv)(Endosulfan - α)	-	0	Repeat Test
Cl- 6.3, Annex N (iv)(Endosulfan - β)	-	0	Repeat Test
Cl- 6.3, Annex N (iv)(Endosulfan - sulphate)	-	0	Repeat Test
Cl- 6.3, Annex N (v)(Monocrotophos)	-	0	Repeat Test
Cl- 6.3, Annex N (vi)(Ethion)	-	0	Repeat Test
Cl- 6.3, Annex N (vii)(Chlorpyrifos)	-	0	Repeat Test
Cl- 6.3, Annex N (viii)(phorate sulphoxide)	-	0	Repeat Test
Cl- 6.3, Annex N (viii)(phorate sulphone)	-	0	Repeat Test
Cl- 6.3, Annex N (ix)(2,4-D)	-	0	Repeat Test
Cl- 6.3, Annex N (x)(Butachlor)	-	0	Repeat Test
Cl- 6.3, Annex N (xi)(Isoproturon)	-	0	Repeat Test
Cl- 6.3, Annex N (xii)(Alachlor)	-	0	Repeat Test
Cl- 6.3, Annex N (xiii)(Atrazine)	-	0	Repeat Test
Cl- 6.3, Annex N (xiv)(Methyl parathion)	-	0	Repeat Test
Cl- 6.3, Annex N (xiv)(Methyl paraoxon)	-	0	Repeat Test
Cl- 6.3, Annex N (xv)(Malathion)	-	0	Repeat Test
Cl- 6.3, Annex N (xv)(malaoxon)	-	0	Repeat Test
Cl- 6.3, Annex N (xvi)(Aldrin)	-	0	Repeat Test
Cl-6.3, Annex N (XVI)(Dieldrin)	-	0	Repeat Test
6.1.1(Escherichia coli)	-	0	Repeat Test
6.1.2(Coliform)	-	0	Repeat Test
6.1.3(Faecal Streptococci)	-	0	Repeat Test
Cl-6.1.3(Staphylococcus aureus)	-	0	Repeat Test
6.1.4(Sulphite Reducing Anaerobe)	-	0	Repeat Test
6.1.5(Pseudomonas aeruginosa)	-	0	Repeat Test
6.1.6(Yeast and moould)	-	0	Repeat Test
6.1.7(Salmonella)	-	0	Repeat Test
6.1.8(Vibrio Cholera)	-	0	Repeat Test
Cl-6.1.7(Shigella)	-	0	Repeat Test
Cl-6.1.8(V. parahaemolyticus)	-	0	Repeat Test
6.2/Table 3/viii(Polychlorinated biphenyle (PCB))	-	0	Repeat Test
6.2/Table 3/ix(Polynuclear aromatic hydrocarbons)	-	0	Repeat Test
Cl- 6.3, Annex N (viii)(Phorate and its oxygen analogue)	-	0	Repeat Test

31 Jul, 2028

-
Included w.e.f.16.04.2025 Exclusion Cl 6.2/Table 4/i (Alpha emitters, Bq/l, Max) Cl 6.2/Table 4/ii (Beta emitters, Bq/l, Max)

7601

PIONEER TESTING LABORATORY PRIVATE LIMITED

8176806

IS 6603 (2024)

Stainless Steel Semi-Finished Products, Bars, Wire Rods and Bright Bars â Specification (Second Revision)

All

16300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl - 9.1,9.5,13.2(Thickness or Diameter)	-	600	-
Cl - 9.1,9.5,13.2(Proof Strength Rp 0.2 MP)	-	1000	-
Cl - 9.1,9.5,13.2(Proof Strength Rp 1.0 MP)	-	1000	-
Cl - 9.1,9.5,13.2(Tensile Strength)	-	1500	-
Cl - 9.1,9.5,13.2(Elongation After Fracture Long.)	-	1000	-
Cl - 9.1,9.5,13.2(Elongation After Fracture Tr.)	-	1000	-
Cl - 9.1,9.5,13.2(Impact Energy (ISO-V) Long.)	-	1500	-
Cl - 9.1,9.5,13.2(Impact Energy (ISO-V) Tr.)	-	1500	-
Cl - 9.1,9.5,13.2(Resistance to Inter-Granular Corrosion in the Delivery Condition)	-	2500	-
Cl - 9.1,9.5,13.2(Resistance to Inter-Granular Corrosion in the Sensitized Condition)	-	2500	-
Cl - 9.1,9.5,13.2(Hardness)	-	1800	-
Cl - 9.1,9.5,13.2(Elongation After Fracture)	-	1000	-
Cl - 9.1,9.5,13.2(Impact Energy (ISO-V))	-	1500	-
Cl - 9.1,9.3,9.4,9.5,13.2(Thickness or Diameter)	-	600	-
Cl - 9.1,9.3,9.4,9.5,13.2(R MPa Max(Annealed))	-	1500	-
Cl - 9.1,9.3,9.4,9.5,13.2(Hardness HB Max(Annealed))	-	1800	-
Cl - 9.1,9.3,9.4,9.5,13.2(Heat Treatment Condition (Quenched + Tempered))	-	0	-
Cl - 9.1,9.3,9.4,9.5,13.2(R 0.2 MPa Min(Quenched + Tempered))	-	1000	-
Cl - 9.1,9.3,9.4,9.5,13.2(R Mpa(Quenched + Tempered))	-	0	-
Cl - 9.1,9.3,9.4,9.5,13.2(A Percent Min Long.(Quenched + Tempered))	-	0	-
Cl - 9.1,9.3,9.4,9.5,13.2(A Percent Min Tr.(Quenched + Tempered))	-	0	-
Cl - 9.1,9.3,9.4,9.5,13.2(KV J Min Long.(Quenched + Tempered))	-	0	-
Cl - 9.1,9.3,9.4,9.5,13.2(KV J Min Long.(Quenched + Tempered))	-	0	-
Cl - 9.1,9.3,9.4,9.5,13.2(Thickness or Diameter)	-	600	-
Cl - 9.1,9.3,9.4,9.5,13.2(R MPa Max(Annealed))	-	1000	-
Cl - 9.1,9.3,9.4,9.5,13.2(Hardness HB Max(Annealed))	-	1800	-
Cl - 9.1,9.3,9.4,9.5,13.2(Heat Treatment Condition (Quenched + Tempered))	-	0	-
Cl - 9.1,9.3,9.4,9.5,13.2(R 0.2 MPa Min(Quenched + Tempered))	-	1000	-
Cl - 9.1,9.3,9.4,9.5,13.2(R Mpa(Quenched + Tempered))	-	1000	-
Cl - 9.1,9.3,9.4,9.5,13.2(A Percent Min Long.(Quenched + Tempered))	-	1000	-
Cl - 9.1,9.3,9.4,9.5,13.2(A Percent Min Tr.(Quenched + Tempered))	-	1000	-
Cl - 9.1,9.3,9.4,9.5,13.2(KV J Min Long.(Quenched + Tempered))	-	1500	-
Cl - 9.1,9.3,9.4,9.5,13.2(KV J Min Long.(Quenched + Tempered))	-	1500	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 100 Deg. C)	-	1000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 150 Deg. C)	-	1000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 200 Deg. C)	-	1000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 250 Deg. C)	-	1000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 300 Deg. C)	-	1000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 350 Deg. C)	-	1000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 400 Deg. C)	-	1000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 450 Deg. C)	-	1000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 500 Deg. C)	-	1000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 550 Deg. C)	-	1000	-
Cl - 9.2(Minimum 1 Percent Proof Strength at 100 Deg. C.)	-	1000	-
Cl - 9.2(Minimum 1 Percent Proof Strength at 150 Deg. C.)	-	1000	-
Cl - 9.2(Minimum 1 Percent Proof Strength at 200 Deg. C.)	-	1000	-
Cl - 9.2(Minimum 1 Percent Proof Strength at 250 Deg. C.)	-	1000	-
Cl - 9.2(Minimum 1 Percent Proof Strength at 300 Deg. C.)	-	1000	-
Cl - 9.2(Minimum 1 Percent Proof Strength at 350 Deg. C.)	-	1000	-
Cl - 9.2(Minimum 1 Percent Proof Strength at 400 Deg. C.)	-	1000	-
Cl - 9.2(Minimum 1 Percent Proof Strength at 450 Deg. C.)	-	1000	-
Cl - 9.2(Minimum 1 Percent Proof Strength at 550 Deg. C.)	-	1000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 100 Deg. C)	-	1000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 150 Deg. C)	-	1000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 200 Deg. C)	-	1000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 250 Deg. C)	-	1000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 100 Deg. C)	-	1000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 150 Deg. C)	-	1000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 200 Deg. C)	-	1000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 250 Deg. C)	-	1000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 300 Deg. C)	-	1000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 350 Deg. C)	-	1000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 400 Deg. C)	-	1000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 100 Deg. C)	-	1000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 150 Deg. C)	-	1000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 200 Deg. C)	-	1000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 250 Deg. C)	-	1000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 300 Deg. C)	-	1000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 350 Deg. C)	-	1000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 400 Deg. C)	-	1000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 100 Deg. C)	-	1000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 150 Deg. C)	-	1000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 200 Deg. C)	-	1000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 250 Deg. C)	-	1000	-
Cl-7.1, 7.2(C)	-	300	-
Cl-7.1, 7.2(Si)	-	300	-
Cl-7.1, 7.2(Mn)	-	300	-
Cl-7.1, 7.2(P)	-	300	-
Cl-7.1, 7.2(S)	-	300	-
Cl-7.1, 7.2(Cr)	-	300	-
Cl-7.1, 7.2(Mo)	-	300	-
Cl-7.1, 7.2(Ni)	-	300	-
Cl-7.1, 7.2(N)	-	300	-
Cl-7.1, 7.2(Cu)	-	300	-
Cl-7.1, 7.2(Ti)	-	300	-
Cl-7.1, 7.2(W)	-	300	-
cL-7.1, 7.2(Co)	-	300	-
Cl-7.1, 7.2(Ti: (C + N))	-	300	-
Cl-7.1, 7.2(V)	-	300	-
Cl-7.1, 7.2(Al)	-	300	-
Cl-7.1, 7.2(Boron)	-	300	-
Cl-7.1, 7.2(Tungsten)	-	300	-
Cl-7.1, 7.2(Nb)	-	300	-
Cl - 9.1,9.5,13.2(Thickness or Diameter)	-	600	-
Cl - 9.1,9.5,13.2(Proof Strength Rp 0.2 MP)	-	1000	-
Cl - 9.1,9.5,13.2(Proof Strength Rp 1.0 MP)	-	1000	-
Cl - 9.1,9.5,13.2(Tensile Strength)	-	1500	-
Cl - 9.1,9.5,13.2(Elongation After Fracture Long.)	-	1000	-
Cl - 9.1,9.5,13.2(Elongation After Fracture Tr.)	-	1000	-
Cl - 9.1,9.5,13.2(Impact Energy (ISO-V) Long.)	-	1500	-
Cl - 9.1,9.5,13.2(Impact Energy (ISO-V) Tr.)	-	1500	-
Cl - 9.1,9.5,13.2(Resistance to Inter-Granular Corrosion in the Delivery Condition)	-	2500	-
Cl - 9.1,9.5,13.2(Resistance to Inter-Granular Corrosion in the Sensitized Condition)	-	2500	-
Cl - 9.1,9.5,13.2(Hardness)	-	1800	-
Cl - 9.1,9.5,13.2(Elongation After Fracture)	-	1000	-
Cl - 9.1,9.5,13.2(Impact Energy (ISO-V))	-	1500	-
Cl - 9.1,9.3,9.4,9.5,13.2(Thickness or Diameter)	-	600	-
Cl - 9.1,9.3,9.4,9.5,13.2(R MPa Max(Annealed))	-	1000	-
Cl - 9.1,9.3,9.4,9.5,13.2(Hardness HB Max(Annealed))	-	1800	-
Cl - 9.1,9.3,9.4,9.5,13.2(Heat Treatment Condition (Quenched + Tempered))	-	0	-
Cl - 9.1,9.3,9.4,9.5,13.2(R 0.2 MPa Min(Quenched + Tempered))	-	1000	-
Cl - 9.1,9.3,9.4,9.5,13.2(R Mpa(Quenched + Tempered))	-	1000	-
Cl - 9.1,9.3,9.4,9.5,13.2(A Percent Min Long.(Quenched + Tempered))	-	1000	-
Cl - 9.1,9.3,9.4,9.5,13.2(A Percent Min Tr.(Quenched + Tempered))	-	1000	-
Cl - 9.1,9.3,9.4,9.5,13.2(KV J Min Long.(Quenched + Tempered))	-	1500	-
Cl - 9.1,9.3,9.4,9.5,13.2(KV J Min Long.(Quenched + Tempered))	-	1000	-
Cl - 9.1,9.3,9.4,9.5,13.2(Thickness or Diameter)	-	600	-
Cl - 9.1,9.3,9.4,9.5,13.2(R MPa Max(Annealed))	-	1000	-
Cl - 9.1,9.3,9.4,9.5,13.2(Hardness HB Max(Annealed))	-	1800	-
Cl - 9.1,9.3,9.4,9.5,13.2(Heat Treatment Condition (Quenched + Tempered))	-	0	-
Cl - 9.1,9.3,9.4,9.5,13.2(R 0.2 MPa Min(Quenched + Tempered))	-	1000	-
Cl - 9.1,9.3,9.4,9.5,13.2(R Mpa(Quenched + Tempered))	-	1000	-
Cl - 9.1,9.3,9.4,9.5,13.2(A Percent Min Long.(Quenched + Tempered))	-	1000	-
Cl - 9.1,9.3,9.4,9.5,13.2(A Percent Min Tr.(Quenched + Tempered))	-	1000	-
Cl - 9.1,9.3,9.4,9.5,13.2(KV J Min Long.(Quenched + Tempered))	-	1500	-
Cl - 9.1,9.3,9.4,9.5,13.2(KV J Min Long.(Quenched + Tempered))	-	1500	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 100 Deg. C)	-	1000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 150 Deg. C)	-	1000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 200 Deg. C)	-	1000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 250 Deg. C)	-	1000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 300 Deg. C)	-	1000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 350 Deg. C)	-	1000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 400 Deg. C)	-	1000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 450 Deg. C)	-	1000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 500 Deg. C)	-	1000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 550 Deg. C)	-	1000	-
Cl - 9.2(Minimum 1 Percent Proof Strength at 100 Deg. C.)	-	1000	-
Cl - 9.2(Minimum 1 Percent Proof Strength at 150 Deg. C.)	-	1000	-
Cl - 9.2(Minimum 1 Percent Proof Strength at 200 Deg. C.)	-	1000	-
Cl - 9.2(Minimum 1 Percent Proof Strength at 250 Deg. C.)	-	1000	-
Cl - 9.2(Minimum 1 Percent Proof Strength at 300 Deg. C.)	-	1000	-
Cl - 9.2(Minimum 1 Percent Proof Strength at 350 Deg. C.)	-	1000	-
Cl - 9.2(Minimum 1 Percent Proof Strength at 400 Deg. C.)	-	1000	-
Cl - 9.2(Minimum 1 Percent Proof Strength at 450 Deg. C.)	-	1000	-
Cl - 9.2(Minimum 1 Percent Proof Strength at 550 Deg. C.)	-	1000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 100 Deg. C)	-	1000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 150 Deg. C)	-	1000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 200 Deg. C)	-	1000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 250 Deg. C)	-	1000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 100 Deg. C)	-	1000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 150 Deg. C)	-	1000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 200 Deg. C)	-	1000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 250 Deg. C)	-	1000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 300 Deg. C)	-	1000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 350 Deg. C)	-	1000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 400 Deg. C)	-	1000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 100 Deg. C)	-	1000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 150 Deg. C)	-	1000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 200 Deg. C)	-	1000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 250 Deg. C)	-	1000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 300 Deg. C)	-	1000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 350 Deg. C)	-	1000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 400 Deg. C)	-	1000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 100 Deg. C)	-	1000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 150 Deg. C)	-	1000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 200 Deg. C)	-	1000	-
Cl - 9.2(Minimum 0.2 Percent Proof Strength at 250 Deg. C)	-	1000	-
Cl-7.1, 7.2(C)	-	300	-
Cl-7.1, 7.2(Si)	-	300	-
Cl-7.1, 7.2(Mn)	-	300	-
Cl-7.1, 7.2(P)	-	300	-
Cl-7.1, 7.2(S)	-	300	-
Cl-7.1, 7.2(Cr)	-	300	-
Cl-7.1, 7.2(Mo)	-	300	-
Cl-7.1, 7.2(Ni)	-	300	-
Cl-7.1, 7.2(N)	-	300	-
Cl-7.1, 7.2(Cu)	-	300	-
Cl-7.1, 7.2(Ti)	-	300	-
Cl-7.1, 7.2(W)	-	300	-
cL-7.1, 7.2(Co)	-	300	-
Cl-7.1, 7.2(Ti: (C + N))	-	300	-
Cl-7.1, 7.2(V)	-	300	-
Cl-7.1, 7.2(Al)	-	300	-
Cl-7.1, 7.2(Boron)	-	300	-
Cl-7.1, 7.2(Tungsten)	-	300	-
Cl-7.1, 7.2(Nb)	-	300	-
Cl. 7.1, 7.2, 7.3 & 13.1 Table 1((Titanium- Established instrumental/ chemical method as agreed to between purchaser and the manufacturer.))	-	300	-
Cl 6((freedom from defects))	-	500	-
Cl. 12((dimension and tolerance))	-	600	-
Cl. 14((corrosion resistance))	-	2500	-

-
Included w.e.f 20.05.2025

7602

BIS, Eastern Regional Laboratory (ERL)

None

IS 13995 (1995)

Unlined moulded rubber boots - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Thickness )	-
5.1.1 (Tensile Strength (before ageing))	-
5.1.2 (Tensile Strength (after ageing))	-
5.1.3 (Tear Strength)	-
5.1.4 (Resistance to dry heat ageing )	-
5.1.5 (Flexing resistance of upper)	-
5.1.7 (Size)	-
5.1.6 (Design)	-
6, 6.1 (Marking)	-
Cl.6, 6.1 (Marking)	-

-
Mech: Complete, Chem: Complete

7603

PIONEER TESTING LABORATORY PRIVATE LIMITED

8176806

IS 4026 (2023)

ALUMINIUM INGOTS BILLETS AND WIRE BARS EC GRADE

All

3600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8(SHAPES AND SIZES)	-	600	-
9, Table 1, i)(Aluminium, Min)	-	500	-
9, Table 1, ii)(Silicon)	-	500	-
9, Table 1, iii)(Iron)	-	500	-
9, Table 1, iv)(Copper)	-	500	-
9, Table 1, v)(Manganese)	-	500	-
9, Table 1, vi)(Magnesium)	-	500	-
9, Table 1, vii)(Chromium)	-	500	-
9, Table 1, viii)(Zinc)	-	500	-
9, Table 1, ix)(Titanium)	-	500	-
9, Table 1, x)(Boron)	-	500	-
9, Table 1, xi)(Gallium)	-	500	-
9, Table 1, xii)(Zirconium)	-	500	-
9, Table 1, xiii)(Titanium + Vanadium)	-	500	-
9, Table 1, xiv)(Other elements (each))	-	500	-
9, Table 1, xv)(Other elements (Total))	-	500	-
8(SHAPES AND SIZES)	-	600	-
9, Table 1, i)(Aluminium, Min)	-	500	-
9, Table 1, ii)(Silicon)	-	500	-
9, Table 1, iii)(Iron)	-	500	-
9, Table 1, iv)(Copper)	-	500	-
9, Table 1, v)(Manganese)	-	500	-
9, Table 1, vi)(Magnesium)	-	500	-
9, Table 1, vii)(Chromium)	-	500	-
9, Table 1, viii)(Zinc)	-	500	-
9, Table 1, ix)(Titanium)	-	500	-
9, Table 1, x)(Boron)	-	500	-
9, Table 1, xi)(Gallium)	-	500	-
9, Table 1, xii)(Zirconium)	-	500	-
9, Table 1, xiii)(Titanium + Vanadium)	-	500	-
9, Table 1, xiv)(Other elements (each))	-	0	-
9, Table 1, xv)(Other elements (Total))	-	0	-

-
Included w.e.f 20.05.2025

7604

Bharat Test House Pvt Ltd 1474 Sonipat Haryana

9135626

IS 1258 (2024)

Bayonet lampholders (Fifth Revision)

Bayonet lampholders

14500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General requirements)	-	0	-
6(Standard ratings)	-	50	-
7(Classification)	-	50	-
8(Marking)	-	100	-
9(Dimensions)	-	200	-
10(Protection against electric shock)	-	750	-
11(Terminals)	-	500	-
12(Provision for earthing)	-	750	-
13(Construction)	-	500	-
14(Switched lampholders)	-	1000	-
15(Moisture resistance, insulation resistance and electrical strength)	-	1500	-
16(Mechanical strength)	-	1250	-
17(Screws, current-carrying parts and connections)	-	750	-
18(Creepage distances and clearances)	-	600	-
19(General resistance to heat)	-	1250	-
20(Resistance to heat, fire and tracking)	-	2250	-
21(Resistance to excessive residual stresses (season cracking) and to rusting)	-	3000	-
Annex A(Season cracking/corrosion test)	-	500	-
12.4(Thermal tests)	-	750	-
9.1(Lampholder dimensions)	-	200	-
11.2(Terminals)	-	500	-
12.3(Provision for earthing)	-	750	-
13.1(Construction)	-	500	-
13.8(Construction)	-	500	-
14.4(Switched lampholders)	-	1000	-
15.1(Moisture resistance, insulation resistance and electrical strength)	-	1500	-
16.7(Mechanical strength)	-	1250	-
16.8(Mechanical strength)	-	1250	-
21.2(Resistance to excessive residual stresses (season cracking) and to rusting)	-	3000	-
4(General requirements)	-	0	-
6(Standard ratings)	-	0	-
7(Classification)	-	0	-
8(Marking)	-	0	-
9(Dimensions)	-	0	-
10(Protection against electric shock)	-	0	-
11(Terminals)	-	0	-
12(Provision for earthing)	-	0	-
13(Construction)	-	0	-
14(Switched lampholders)	-	0	-
15(Moisture resistance, insulation resistance and electrical strength)	-	0	-
16(Mechanical strength)	-	0	-
17(Screws, current-carrying parts and connections)	-	0	-
18(Creepage distances and clearances)	-	0	-
19(General resistance to heat)	-	0	-
20(Resistance to heat, fire and tracking)	-	0	-
21(Resistance to excessive residual stresses (season cracking) and to rusting)	-	0	-
Annex A(Season cracking/corrosion test)	-	0	-
12.4(Thermal tests)	-	0	-
9.1(Lampholder dimensions)	-	0	-
11.2(Terminals)	-	0	-
12.3(Provision for earthing)	-	0	-
13.1(Construction)	-	0	-
13.8(Construction)	-	0	-
14.4(Switched lampholders)	-	0	-
15.1(Moisture resistance, insulation resistance and electrical strength)	-	0	-
16.7(Mechanical strength)	-	0	-
16.8(Mechanical strength)	-	0	-
21.2(Resistance to excessive residual stresses (season cracking) and to rusting)	-	0	-

19 Mar, 2029

-
Included.w.e.f.27.01.2025

7605

Aaditech Test and Calibration Lab LLP

8179926

IS 302 : Part 2 : Sec 21 (2024)

Household and Similar Electrical Appliancesï¿½Safety Part 2 Particular Requirements Section 21 Storage Water Heaters

ELECTRICAL

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General requirement)	-	1000	-
5(General conditions for the tests)	-	1000	-
6(Classification)	-	1000	-
7(Marking and instructions)	-	1000	-
8(Protection against access to live parts)	-	1000	-
9(Starting of motor-operated appliances)	-	1000	-
10(Power input and current)	-	1000	-
11(Heating)	-	1000	-
13(Leakage current and electric strength at operating temperature)	-	1000	-
14(Transient overvoltages)	-	1000	-
15(Moisture resistance)	-	1000	-
16(Leakage current and electric strength)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
18(Endurance)	-	1000	-
19(Abnormal operation)	-	1000	-
20(Stability and mechanical hazards)	-	1000	-
21(Mechanical strength)	-	1000	-
22(Construction)	-	1000	-
23(Internal wiring)	-	1000	-
24(Components)	-	1000	-
25(Supply connection and external flexible cords)	-	1000	-
26(Terminals for external conductors)	-	1000	-
27(Provision for earthing)	-	1000	-
28(Screws and connections)	-	1000	-
29(Clearances, creepage distances and solid insulation)	-	1000	-
30(Resistance to heat and fire)	-	1000	-
31(Resistance to rusting)	-	1000	-
32(Radiation, toxicity and similar hazards)	-	1000	-
A.101(Pressure test)	-	1000	-
19.11.4.1(Electrostatic discharges)	-	1000	-
19.11.4.2(Radiated fields)	-	1000	-
19.11.4.3(Fast transient bursts)	-	1000	-
19.11.4.4(Surge immunity test)	-	1000	-
19.11.4.5(Immunity to conducted discharges)	-	1000	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	1000	-
19.11.4.7(Harmonics)	-	1000	-
12(Charging of metal-ion batteries)	-	1000	-
22.101(rated pressure)	-	1000	-
22.102(Closed water heaters)	-	1000	-
22.103(Addition)	-	1000	-
22.104(Addition)	-	1000	-
22.105(Cistern-type water heaters)	-	1000	-
22.109(Addition)	-	1000	-
4(General requirement)	-	1000	-
5(General conditions for the tests)	-	1000	-
6(Classification)	-	1000	-
7(Marking and instructions)	-	1000	-
8(Protection against access to live parts)	-	1000	-
9(Starting of motor-operated appliances)	-	1000	-
10(Power input and current)	-	1000	-
11(Heating)	-	1000	-
13(Leakage current and electric strength at operating temperature)	-	1000	-
14(Transient overvoltages)	-	1000	-
15(Moisture resistance)	-	1000	-
16(Leakage current and electric strength)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
18(Endurance)	-	1000	-
19(Abnormal operation)	-	1000	-
20(Stability and mechanical hazards)	-	1000	-
21(Mechanical strength)	-	1000	-
22(Construction)	-	1000	-
23(Internal wiring)	-	1000	-
24(Components)	-	1000	-
25(Supply connection and external flexible cords)	-	1000	-
26(Terminals for external conductors)	-	1000	-
27(Provision for earthing)	-	1000	-
28(Screws and connections)	-	1000	-
29(Clearances, creepage distances and solid insulation)	-	1000	-
30(Resistance to heat and fire)	-	1000	-
31(Resistance to rusting)	-	1000	-
32(Radiation, toxicity and similar hazards)	-	1000	-
A.101(Pressure test)	-	1000	-
19.11.4.1(Electrostatic discharges)	-	1000	-
19.11.4.2(Radiated fields)	-	1000	-
19.11.4.3(Fast transient bursts)	-	1000	-
19.11.4.4(Surge immunity test)	-	1000	-
19.11.4.5(Immunity to conducted discharges)	-	1000	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	1000	-
19.11.4.7(Harmonics)	-	1000	-
12(Charging of metal-ion batteries)	-	1000	-
22.101(rated pressure)	-	1000	-
22.102(Closed water heaters)	-	1000	-
22.103(Addition)	-	1000	-
22.104(Addition)	-	1000	-
22.105(Cistern-type water heaters)	-	1000	-
22.109(Addition)	-	1000	-
4(General requirement)	-	1000	-
5(General conditions for the tests)	-	1000	-
6(Classification)	-	1000	-
7(Marking and instructions)	-	1000	-
8(Protection against access to live parts)	-	1000	-
9(Starting of motor-operated appliances)	-	1000	-
10(Power input and current)	-	1000	-
11(Heating)	-	1000	-
13(Leakage current and electric strength at operating temperature)	-	1000	-
14(Transient overvoltages)	-	1000	-
15(Moisture resistance)	-	1000	-
16(Leakage current and electric strength)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
18(Endurance)	-	1000	-
19(Abnormal operation)	-	1000	-
20(Stability and mechanical hazards)	-	1000	-
21(Mechanical strength)	-	1000	-
22(Construction)	-	1000	-
23(Internal wiring)	-	1000	-
24(Components)	-	1000	-
25(Supply connection and external flexible cords)	-	1000	-
26(Terminals for external conductors)	-	1000	-
27(Provision for earthing)	-	1000	-
28(Screws and connections)	-	1000	-
29(Clearances, creepage distances and solid insulation)	-	1000	-
30(Resistance to heat and fire)	-	1000	-
31(Resistance to rusting)	-	1000	-
32(Radiation, toxicity and similar hazards)	-	1000	-
A.101(Pressure test)	-	1000	-
19.11.4.1(Electrostatic discharges)	-	1000	-
19.11.4.2(Radiated fields)	-	1000	-
19.11.4.3(Fast transient bursts)	-	1000	-
19.11.4.4(Surge immunity test)	-	1000	-
19.11.4.5(Immunity to conducted discharges)	-	1000	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	1000	-
19.11.4.7(Harmonics)	-	1000	-
12(Charging of metal-ion batteries)	-	1000	-
22.101(rated pressure)	-	1000	-
22.102(Closed water heaters)	-	1000	-
22.103(Addition)	-	1000	-
22.104(Addition)	-	1000	-
22.105(Cistern-type water heaters)	-	1000	-
22.109(Addition)	-	1000	-
4(General requirement)	-	1000	-
5(General conditions for the tests)	-	1000	-
6(Classification)	-	1000	-
7(Marking and instructions)	-	1000	-
8(Protection against access to live parts)	-	1000	-
9(Starting of motor-operated appliances)	-	1000	-
10(Power input and current)	-	1000	-
11(Heating)	-	1000	-
13(Leakage current and electric strength at operating temperature)	-	1000	-
14(Transient overvoltages)	-	1000	-
15(Moisture resistance)	-	1000	-
16(Leakage current and electric strength)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
18(Endurance)	-	1000	-
19(Abnormal operation)	-	1000	-
20(Stability and mechanical hazards)	-	1000	-
21(Mechanical strength)	-	1000	-
22(Construction)	-	1000	-
23(Internal wiring)	-	1000	-
24(Components)	-	1000	-
25(Supply connection and external flexible cords)	-	1000	-
26(Terminals for external conductors)	-	1000	-
27(Provision for earthing)	-	1000	-
28(Screws and connections)	-	1000	-
29(Clearances, creepage distances and solid insulation)	-	1000	-
30(Resistance to heat and fire)	-	1000	-
31(Resistance to rusting)	-	1000	-
32(Radiation, toxicity and similar hazards)	-	1000	-
A.101(Pressure test)	-	1000	-
19.11.4.1(Electrostatic discharges)	-	1000	-
19.11.4.2(Radiated fields)	-	1000	-
19.11.4.3(Fast transient bursts)	-	1000	-
19.11.4.4(Surge immunity test)	-	1000	-
19.11.4.5(Immunity to conducted discharges)	-	1000	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	1000	-
19.11.4.7(Harmonics)	-	1000	-
12(Charging of metal-ion batteries)	-	1000	-
22.101(rated pressure)	-	1000	-
22.102(Closed water heaters)	-	1000	-
22.103(Addition)	-	1000	-
22.104(Addition)	-	1000	-
22.105(Cistern-type water heaters)	-	1000	-
22.109(Addition)	-	1000	-

-
Included w.e.f 30.04.2025 Exclusion:Cl 19.11.4.1 to 19.11.4.7 (EMI/EMC)

7606

Atharva Laboratories Pvt. Ltd. (D115A), Noida (8134206)

8134206

IS/IEC 62368 : Part 1 (2018)

Audio / Video, Information and Communication Technology Equipment Part 1 Safety Requirements ( First Revision )

110000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 4, 4.1, 4.1.1, 4.1.2, 4.1.3, 4.1.4, 4.1.5, 4.1.6, 4.1.7, 4.1.8, 4.1.9,4.1.10, 4.1.11,4.1.12, 4.1.13, 4.1.14,4.1.15(General Requirements)	-	3000	-
Cl. 4.2, 4.2.1, 4.2.2, 4.2.3, 4.2.4(Energy source classifications)	-	3000	-
Cl. No. 4.3 ,4.4,4.5, 4.6,4.7,4.8,4.9,4.10 with all sub clauses(Protection against energy sources)	-	3000	-
Cl. No. 5,5.1,5.2,5.3,5.4,5.5,5.6,5.7,5.8 with all sub clauses(Electrically-caused injury)	-	6000	-
Cl No. 6,6.1,6.2,6.3,6.4,6.5,6.6 with all sub clause(Electrically-caused fire)	-	5000	-
Cl. 7, 7.1, 7.2, 7.3, 7.4, 7.5, 7.6(Injury caused by hazardous substances)	-	6000	-
Cl. 9, 9.1, 9.2, 9.2.1,9.2.2, 9.2.3, 9.3, 9.3.1, 9.3.2, 9.4, 9.5, 9.5.1, 9.5.2, 9.6, 9.6.1, 9.6.2, 9.6.3(Thermal burn injury)	-	7000	-
Cl. 8,8.1,8.2,8.3,8.4,8.5,8.6,8.7,8.8,8.9,8.10,8.11,8.12 with all sub clause(Mechanically-caused injury)	-	5000	-
Annex. B, B.1, B.1.1, B.1.2, B.1.3, B.1.4, B.1.5,B.2,B.2.1, B.2.2, B.2.3, B.2.4, B.2.5, B.2.6, B.2.6.1, B.2.6.2, B.2.6.3, B.2.7, B.3, B.3.1, B.3.2, B.3.3, B.3.4, B.3.5, B.3.6, B.3.7, B.3.8, B.4, B.4.1, B.4.2, B.4.3, B.4.3.1, B.4.3.2,B.4.4, B.4.4.1, B.4.4.(Normal operating condition tests, abnormal operating condition tests and single fault condition tests)	-	7000	-
Annex. D, D.1, D.2, D.3(Test Generators)	-	6000	-
Annex E, E.1, E.2, E.3(Test conditions)	-	6000	-
Annex. F, F.1, F.2, F2.1, F.2.2,F2.3,F.3, F.3.1, F.3.2, F.3.2.1,F.3.2.2, F.3.3,F.3.3.1, F.3.3.2,F.3.3.3, F.3.3.4, F.3.3.5, F.3.3.6,F.3.3.7, F.3.3.8, F.3.4, F.3.5, F.3.5.1,F.3.5.2, F.3.5.3, F.3.5.4, F.3.5.5,F.3.5.6, F.3.5.7,F.3.6, F.3.6.1, F.3.6.1.1, F.3.6(Equipment markings, instructions, and instructional safeguards)	-	2000	-
Annex. G, G.1, G.1.1, G.1.2, G.1.3, G.2, G.2.1, G.2.2, G.2.3, G.2.4, G.3, G.3.1, G.3.1.1, G.3.1.2, G.3.2, G.3.2.1,G.3.2.2, G.3.3,G.3.4, G.3.5, G.3.5.1, G.3.5.2, G.4, G.4.1, G.4.2, G.4.3, G.5, G.5.1, G.5.1.1, G.5.1.2,G.5.1.3,G.5.2,G.5.2.1, G.5.2.2, G.5.2.3(Components)	-	0	-
Annex I(Overvoltage categories)	-	2000	-
Annex. J, J.1, J.2, J.2.1, J.2.2, J.2.2.1, J.2.2.1.1, J.2.2.1.2, J.2.2.1.3, J.2.2.2, J.2.3, J.2.4, J.2.5, J.3, J.3.1, J.3.2, J.3.3(Insulated winding wires for use without interleaved insulation)	-	0	-
Annex. K, K.1, K.1.1, K.1.2, K.2, K.3, K.4, K.5, K.5.1, K.5.2, K.6, K.6.1, K.6.2, K.7, K.7.1, K.7.2, K.7.3, K.7.4(Safety Interlocks)	-	3000	-
Annex. L, L.1, L.2, L.3, L.4, L.5, L.6, L.7, L.8, L.9,(Disconnect devices)	-	4000	-
Annex. M, M.1, M.2, M.2.1, M.2.2, M.3, M.3.1, M.3.2, M.3.3, M.4, M.4.1, M.4.2,M.4.2.1, M.4.2.2,M.4.3, M.4.4,M.4.4.1, M.4.4.2,M.4.4.3, M.4.4.4, M.4.4.5, M.4.4.6, M.5, M.5.1, M.5.2, M.6, M.6.1, M.6.2, M.7, M.7.1, M.7.2, M.7.3, M.7.3.1,M.7.3.2, M.7.3.3, M.7.(Equipment containing batteries and their protection circuits)	-	3000	-
Annex. N(Electrochemical potentials)	-	4000	-
Annex. O(Measurement of creepage distances and clearances)	-	3000	-
Annex. P, P.1, P.2, P.2.1, P.2.2, P.2.3, P.2.3.1, P.2.3.2, P.3, P.3.1, P.3.2, P.3.3, P.3.4, P.4, P.4.1, P.4.2(Safeguards against conductive objects)	-	4000	-
Annex. Q, Q.1, Q.1.1, Q.1.2, Q.2(Circuits intended for interconnection with building wiring)	-	5000	-
Annex. R, R.1, R.2, R.3, R.4(Limited short-circuit test)	-	0	-
Annex. S, S.1, S.2, S.3, S.3.1, S.3.2, S.4, S.5(Tests for resistance to heat and fire)	-	2000	-
Annex. T, T.1, T.2, T.3, T.4, T.5, T.6, T.7, T.8, T.9, T.10, T.11(Mechanical strength tests)	-	7000	-
Annex. V, V.1, V.1.1, V.1.2, V.1.3, V.1.4, V.1.5, V.1.6, V.2(Determination of accessible parts)	-	4000	-
Annex. X(Alternative method for determining clearances for insulation in circuits connected to an AC mains not exceeding 420V peak (300V rms))	-	4000	-
Annex. Y, Y.1, Y.2, Y.3, Y.3.1, Y.3.2, Y.3.3, Y.3.4, Y.3.5, Y.4, Y.4.1 Y.4.2, Y.4.3, Y.4.4, Y.4.5, Y.5, Y.5.1, Y.5.2, Y.5.3, Y.5.4, Y.5.5, Y.5.5.1, Y.5.5.2, Y.5.5.3, Y.6, Y.6.1, Y.6.2(Construction requirements for outdoor enclosure)	-	4000	-
10(Radiation)	-	0	-
Annex C, C.1 & C.2(UV radiation)	-	0	-
Cl. 4, 4.1, 4.1.1, 4.1.2, 4.1.3, 4.1.4, 4.1.5, 4.1.6, 4.1.7, 4.1.8, 4.1.9,4.1.10, 4.1.11,4.1.12, 4.1.13, 4.1.14,4.1.15(General Requirements)	-	0	-
Cl. 4.2, 4.2.1, 4.2.2, 4.2.3, 4.2.4(Energy source classifications)	-	0	-
Cl. No. 4.3 ,4.4,4.5, 4.6,4.7,4.8,4.9,4.10 with all sub clauses(Protection against energy sources)	-	0	-
Cl. No. 5,5.1,5.2,5.3,5.4,5.5,5.6,5.7,5.8 with all sub clauses(Electrically-caused injury)	-	0	-
Cl No. 6,6.1,6.2,6.3,6.4,6.5,6.6 with all sub clause(Electrically-caused fire)	-	0	-
Cl. 7, 7.1, 7.2, 7.3, 7.4, 7.5, 7.6(Injury caused by hazardous substances)	-	0	-
Cl. 9, 9.1, 9.2, 9.2.1,9.2.2, 9.2.3, 9.3, 9.3.1, 9.3.2, 9.4, 9.5, 9.5.1, 9.5.2, 9.6, 9.6.1, 9.6.2, 9.6.3(Thermal burn injury)	-	0	-
Cl. 8,8.1,8.2,8.3,8.4,8.5,8.6,8.7,8.8,8.9,8.10,8.11,8.12 with all sub clause(Mechanically-caused injury)	-	0	-
Annex. B, B.1, B.1.1, B.1.2, B.1.3, B.1.4, B.1.5,B.2,B.2.1, B.2.2, B.2.3, B.2.4, B.2.5, B.2.6, B.2.6.1, B.2.6.2, B.2.6.3, B.2.7, B.3, B.3.1, B.3.2, B.3.3, B.3.4, B.3.5, B.3.6, B.3.7, B.3.8, B.4, B.4.1, B.4.2, B.4.3, B.4.3.1, B.4.3.2,B.4.4, B.4.4.1, B.4.4.(Normal operating condition tests, abnormal operating condition tests and single fault condition tests)	-	0	-
Annex. D, D.1, D.2, D.3(Test Generators)	-	0	-
Annex E, E.1, E.2, E.3(Test conditions)	-	0	-
Annex. F, F.1, F.2, F2.1, F.2.2,F2.3,F.3, F.3.1, F.3.2, F.3.2.1,F.3.2.2, F.3.3,F.3.3.1, F.3.3.2,F.3.3.3, F.3.3.4, F.3.3.5, F.3.3.6,F.3.3.7, F.3.3.8, F.3.4, F.3.5, F.3.5.1,F.3.5.2, F.3.5.3, F.3.5.4, F.3.5.5,F.3.5.6, F.3.5.7,F.3.6, F.3.6.1, F.3.6.1.1, F.3.6(Equipment markings, instructions, and instructional safeguards)	-	0	-
Annex. G, G.1, G.1.1, G.1.2, G.1.3, G.2, G.2.1, G.2.2, G.2.3, G.2.4, G.3, G.3.1, G.3.1.1, G.3.1.2, G.3.2, G.3.2.1,G.3.2.2, G.3.3,G.3.4, G.3.5, G.3.5.1, G.3.5.2, G.4, G.4.1, G.4.2, G.4.3, G.5, G.5.1, G.5.1.1, G.5.1.2,G.5.1.3,G.5.2,G.5.2.1, G.5.2.2, G.5.2.3(Components)	-	0	-
Annex I(Overvoltage categories)	-	0	-
Annex. J, J.1, J.2, J.2.1, J.2.2, J.2.2.1, J.2.2.1.1, J.2.2.1.2, J.2.2.1.3, J.2.2.2, J.2.3, J.2.4, J.2.5, J.3, J.3.1, J.3.2, J.3.3(Insulated winding wires for use without interleaved insulation)	-	0	-
Annex. K, K.1, K.1.1, K.1.2, K.2, K.3, K.4, K.5, K.5.1, K.5.2, K.6, K.6.1, K.6.2, K.7, K.7.1, K.7.2, K.7.3, K.7.4(Safety Interlocks)	-	0	-
Annex. L, L.1, L.2, L.3, L.4, L.5, L.6, L.7, L.8, L.9,(Disconnect devices)	-	0	-
Annex. M, M.1, M.2, M.2.1, M.2.2, M.3, M.3.1, M.3.2, M.3.3, M.4, M.4.1, M.4.2,M.4.2.1, M.4.2.2,M.4.3, M.4.4,M.4.4.1, M.4.4.2,M.4.4.3, M.4.4.4, M.4.4.5, M.4.4.6, M.5, M.5.1, M.5.2, M.6, M.6.1, M.6.2, M.7, M.7.1, M.7.2, M.7.3, M.7.3.1,M.7.3.2, M.7.3.3, M.7.(Equipment containing batteries and their protection circuits)	-	0	-
Annex. N(Electrochemical potentials)	-	0	-
Annex. O(Measurement of creepage distances and clearances)	-	0	-
Annex. P, P.1, P.2, P.2.1, P.2.2, P.2.3, P.2.3.1, P.2.3.2, P.3, P.3.1, P.3.2, P.3.3, P.3.4, P.4, P.4.1, P.4.2(Safeguards against conductive objects)	-	0	-
Annex. Q, Q.1, Q.1.1, Q.1.2, Q.2(Circuits intended for interconnection with building wiring)	-	0	-
Annex. R, R.1, R.2, R.3, R.4(Limited short-circuit test)	-	0	-
Annex. S, S.1, S.2, S.3, S.3.1, S.3.2, S.4, S.5(Tests for resistance to heat and fire)	-	0	-
Annex. T, T.1, T.2, T.3, T.4, T.5, T.6, T.7, T.8, T.9, T.10, T.11(Mechanical strength tests)	-	0	-
Annex. V, V.1, V.1.1, V.1.2, V.1.3, V.1.4, V.1.5, V.1.6, V.2(Determination of accessible parts)	-	0	-
Annex. X(Alternative method for determining clearances for insulation in circuits connected to an AC mains not exceeding 420V peak (300V rms))	-	0	-
Annex. Y, Y.1, Y.2, Y.3, Y.3.1, Y.3.2, Y.3.3, Y.3.4, Y.3.5, Y.4, Y.4.1 Y.4.2, Y.4.3, Y.4.4, Y.4.5, Y.5, Y.5.1, Y.5.2, Y.5.3, Y.5.4, Y.5.5, Y.5.5.1, Y.5.5.2, Y.5.5.3, Y.6, Y.6.1, Y.6.2(Construction requirements for outdoor enclosure)	-	0	-
10(Radiation)	-	0	-
Annex C, C.1 & C.2(UV radiation)	-	0	-
Cl. 4, 4.1, 4.1.1, 4.1.2, 4.1.3, 4.1.4, 4.1.5, 4.1.6, 4.1.7, 4.1.8, 4.1.9,4.1.10, 4.1.11,4.1.12, 4.1.13, 4.1.14,4.1.15(General Requirements)	-	0	-
Cl. 4.2, 4.2.1, 4.2.2, 4.2.3, 4.2.4(Energy source classifications)	-	0	-
Cl. No. 4.3 ,4.4,4.5, 4.6,4.7,4.8,4.9,4.10 with all sub clauses(Protection against energy sources)	-	0	-
Cl. No. 5,5.1,5.2,5.3,5.4,5.5,5.6,5.7,5.8 with all sub clauses(Electrically-caused injury)	-	0	-
Cl No. 6,6.1,6.2,6.3,6.4,6.5,6.6 with all sub clause(Electrically-caused fire)	-	0	-
Cl. 7, 7.1, 7.2, 7.3, 7.4, 7.5, 7.6(Injury caused by hazardous substances)	-	0	-
Cl. 9, 9.1, 9.2, 9.2.1,9.2.2, 9.2.3, 9.3, 9.3.1, 9.3.2, 9.4, 9.5, 9.5.1, 9.5.2, 9.6, 9.6.1, 9.6.2, 9.6.3(Thermal burn injury)	-	0	-
Cl. 8,8.1,8.2,8.3,8.4,8.5,8.6,8.7,8.8,8.9,8.10,8.11,8.12 with all sub clause(Mechanically-caused injury)	-	0	-
Annex. B, B.1, B.1.1, B.1.2, B.1.3, B.1.4, B.1.5,B.2,B.2.1, B.2.2, B.2.3, B.2.4, B.2.5, B.2.6, B.2.6.1, B.2.6.2, B.2.6.3, B.2.7, B.3, B.3.1, B.3.2, B.3.3, B.3.4, B.3.5, B.3.6, B.3.7, B.3.8, B.4, B.4.1, B.4.2, B.4.3, B.4.3.1, B.4.3.2,B.4.4, B.4.4.1, B.4.4.(Normal operating condition tests, abnormal operating condition tests and single fault condition tests)	-	0	-
Annex. D, D.1, D.2, D.3(Test Generators)	-	0	-
Annex E, E.1, E.2, E.3(Test conditions)	-	0	-
Annex. F, F.1, F.2, F2.1, F.2.2,F2.3,F.3, F.3.1, F.3.2, F.3.2.1,F.3.2.2, F.3.3,F.3.3.1, F.3.3.2,F.3.3.3, F.3.3.4, F.3.3.5, F.3.3.6,F.3.3.7, F.3.3.8, F.3.4, F.3.5, F.3.5.1,F.3.5.2, F.3.5.3, F.3.5.4, F.3.5.5,F.3.5.6, F.3.5.7,F.3.6, F.3.6.1, F.3.6.1.1, F.3.6(Equipment markings, instructions, and instructional safeguards)	-	0	-
Annex. G, G.1, G.1.1, G.1.2, G.1.3, G.2, G.2.1, G.2.2, G.2.3, G.2.4, G.3, G.3.1, G.3.1.1, G.3.1.2, G.3.2, G.3.2.1,G.3.2.2, G.3.3,G.3.4, G.3.5, G.3.5.1, G.3.5.2, G.4, G.4.1, G.4.2, G.4.3, G.5, G.5.1, G.5.1.1, G.5.1.2,G.5.1.3,G.5.2,G.5.2.1, G.5.2.2, G.5.2.3(Components)	-	0	-
Annex I(Overvoltage categories)	-	0	-
Annex. J, J.1, J.2, J.2.1, J.2.2, J.2.2.1, J.2.2.1.1, J.2.2.1.2, J.2.2.1.3, J.2.2.2, J.2.3, J.2.4, J.2.5, J.3, J.3.1, J.3.2, J.3.3(Insulated winding wires for use without interleaved insulation)	-	0	-
Annex. K, K.1, K.1.1, K.1.2, K.2, K.3, K.4, K.5, K.5.1, K.5.2, K.6, K.6.1, K.6.2, K.7, K.7.1, K.7.2, K.7.3, K.7.4(Safety Interlocks)	-	0	-
Annex. L, L.1, L.2, L.3, L.4, L.5, L.6, L.7, L.8, L.9,(Disconnect devices)	-	0	-
Annex. M, M.1, M.2, M.2.1, M.2.2, M.3, M.3.1, M.3.2, M.3.3, M.4, M.4.1, M.4.2,M.4.2.1, M.4.2.2,M.4.3, M.4.4,M.4.4.1, M.4.4.2,M.4.4.3, M.4.4.4, M.4.4.5, M.4.4.6, M.5, M.5.1, M.5.2, M.6, M.6.1, M.6.2, M.7, M.7.1, M.7.2, M.7.3, M.7.3.1,M.7.3.2, M.7.3.3, M.7.(Equipment containing batteries and their protection circuits)	-	0	-
Annex. N(Electrochemical potentials)	-	0	-
Annex. O(Measurement of creepage distances and clearances)	-	0	-
Annex. P, P.1, P.2, P.2.1, P.2.2, P.2.3, P.2.3.1, P.2.3.2, P.3, P.3.1, P.3.2, P.3.3, P.3.4, P.4, P.4.1, P.4.2(Safeguards against conductive objects)	-	0	-
Annex. Q, Q.1, Q.1.1, Q.1.2, Q.2(Circuits intended for interconnection with building wiring)	-	0	-
Annex. R, R.1, R.2, R.3, R.4(Limited short-circuit test)	-	0	-
Annex. S, S.1, S.2, S.3, S.3.1, S.3.2, S.4, S.5(Tests for resistance to heat and fire)	-	0	-
Annex. T, T.1, T.2, T.3, T.4, T.5, T.6, T.7, T.8, T.9, T.10, T.11(Mechanical strength tests)	-	0	-
Annex. V, V.1, V.1.1, V.1.2, V.1.3, V.1.4, V.1.5, V.1.6, V.2(Determination of accessible parts)	-	0	-
Annex. X(Alternative method for determining clearances for insulation in circuits connected to an AC mains not exceeding 420V peak (300V rms))	-	0	-
Annex. Y, Y.1, Y.2, Y.3, Y.3.1, Y.3.2, Y.3.3, Y.3.4, Y.3.5, Y.4, Y.4.1 Y.4.2, Y.4.3, Y.4.4, Y.4.5, Y.5, Y.5.1, Y.5.2, Y.5.3, Y.5.4, Y.5.5, Y.5.5.1, Y.5.5.2, Y.5.5.3, Y.6, Y.6.1, Y.6.2(Construction requirements for outdoor enclosure)	-	0	-
10(Radiation)	-	0	-
Annex C, C.1 & C.2(UV radiation)	-	0	-

21 Jul, 2028

-
included.w.e.f 20.02.2025 Exclusion Cl Components Cl Insulated winding wires for use without interleaved insulation Cl Limited short circuit test Cl Radiation Cl UV Radiation

7607

PIONEER TESTING LABORATORY PRIVATE LIMITED

8176806

IS 14587 (2023)

Prelaminated Medium Density Fibre Board - Specification

All

16500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Medium Density Fibre (MDF) Board)	-	1000	-
Cl-7(Finish)	-	500	-
Cl-8.1(Dimensions of prelaminated MDF)	-	2500	-
Cl-8.2(Tolerances)	-	2500	-
Cl-8.2.1(Edge straightness)	-	100	-
Cl-9.1 S.No-(1), i(Density, kg/m3)	-	750	-
Cl-9.1 S.No-(1), ii(Variation from mean density, percent)	-	750	-
Cl-9.1 S.No-(1), iii(Moisture content, percent)	-	1000	-
Cl-9.1 S.No-(1), iv(Variation from mean moisture content, percent (absolute))	-	1000	-
Cl-9.1 S.No-(1), v(Linear expansion (thickness swelling in water), due to general absorption after 24 h soaking, percent, Max)	-	1000	-
Cl-9.1 S.No-(1), vi(Internal bond strength, N/mm2, Min)	-	1000	-
Cl-9.1 S.No-(1), vii,a(After cyclic test)	-	1000	-
Cl-9.1 S.No-(1), vii,b(After accelerated water resistance test)	-	1000	-
Cl-9.1 S.No-(1), viii(Modulus of rupture, N/mm2 , Min)	-	2500	-
Cl-9.1 S.No-(1), ix(Modulus of elasticity, N/mm2 , Min)	-	2500	-
Cl-9.1 S.No-(1), x,(Screw withdrawal strength, ????????, Min)	-	1000	-
Cl-9.1 S.No-(1), xi(Formaldehyde content (Fc), mg/100 g for oven dry board)	-	4000	-
Cl-9.1 S.No-(1), xii(Steady-state formaldehyde emission (Fc), mg/m3)	-	4000	-
Cl-9.1 S.No-(1), xiii(Abrasion resistance in number of revolutions, Min, (Type 1 to 4))	-	1500	-
Cl-9.1 S.No-(1), xiv(Resistance to steam/water vapours)	-	1500	-
Cl-9.1 S.No-(1), xv(Resistance to crack)	-	1500	-
Cl-9.1 S.No-(1), xvi(Resistance to a cigarette burn)	-	1500	-
Cl-9.1 S.No-(1), xvii(Resistance to stain)	-	1500	-
Cl-11.2(Specific Requirement)	-	0	-
Cl-12(Marking)	-	500	-
Cl-5.2(Impregnated Base Paper)	-	2500	-
Cl-5.3(Impregnated Overlay)	-	0	-
Cl-5.1(Medium Density Fibre (MDF) Board)	-	0	-
Cl-7(Finish)	-	250	-
Cl-8.1(Dimensions of prelaminated MDF)	-	2500	-
Cl-8.2(Tolerances)	-	0	-
Cl-8.2.1(Edge straightness)	-	750	-
Cl-9.1 S.No-(1), i(Density, kg/m3)	-	750	-
Cl-9.1 S.No-(1), ii(Variation from mean density, percent)	-	750	-
Cl-9.1 S.No-(1), iii(Moisture content, percent)	-	750	-
Cl-9.1 S.No-(1), iv(Variation from mean moisture content, percent (absolute))	-	750	-
Cl-9.1 S.No-(1), v(Linear expansion (thickness swelling in water), due to general absorption after 24 h soaking, percent, Max)	-	1000	-
Cl-9.1 S.No-(1), vi(Internal bond strength, N/mm2, Min)	-	1000	-
Cl-9.1 S.No-(1), vii,a(After cyclic test)	-	1000	-
Cl-9.1 S.No-(1), vii,b(After accelerated water resistance test)	-	1000	-
Cl-9.1 S.No-(1), viii(Modulus of rupture, N/mm2 , Min)	-	2500	-
Cl-9.1 S.No-(1), ix(Modulus of elasticity, N/mm2 , Min)	-	2500	-
Cl-9.1 S.No-(1), x,(Screw withdrawal strength, ????????, Min)	-	1000	-
Cl-9.1 S.No-(1), xi(Formaldehyde content (Fc), mg/100 g for oven dry board)	-	4000	-
Cl-9.1 S.No-(1), xii(Steady-state formaldehyde emission (Fc), mg/m3)	-	4000	-
Cl-9.1 S.No-(1), xiii(Abrasion resistance in number of revolutions, Min, (Type 1 to 4))	-	1000	-
Cl-9.1 S.No-(1), xiv(Resistance to steam/water vapours)	-	1500	-
Cl-9.1 S.No-(1), xv(Resistance to crack)	-	1000	-
Cl-9.1 S.No-(1), xvi(Resistance to a cigarette burn)	-	1500	-
Cl-9.1 S.No-(1), xvii(Resistance to stain)	-	1000	-
Cl-11.2(Specific Requirement)	-	0	-
Cl-12(Marking)	-	500	-
Cl-5.2(Impregnated Base Paper)	-	2500	-
Cl-5.3(Impregnated Overlay)	-	0	-

-
Included w.e.f 20.05.2025 Exclusion: Cl 9.1(xii) Steady State Formaldehyde Emission

7608

Ahmedabad Textile Industry's Research Association (ATIRA), Ahmedabad

7173002

IS 18739 (2024)

Textiles Bedsheets Pillow cover and Blanket Cover Specification

32050 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1, Table-1(Fibre content)	-	500	-
3.1, Table-1(Count of Yarn-Warp)	-	225	-
3.1, Table-1(Count of Yarn-Weft)	-	225	-
3.1, Table-1(Weave)	-	600	-
3.1, Table-1(Ends/cm)	-	150	-
3.1, Table-1(Picks/cm)	-	150	-
3.1, Table-1(Mass g/m2, Min)	-	450	-
3.1, Table-1, (iii)(Tolerance)	-	550	Tape Dimension & Number of Ply as per Clause 3.1
3.1, Table-2(Breaking Load on 5 cm × 20 cm Strip (Ravelled Strip Method)-Warpway)	-	450	-
3.1, Table-2(Breaking Load on 5 cm × 20 cm Strip (Ravelled Strip Method)-Weftway)	-	450	-
3.1, Table-2(Tear Strength,-Warpway)	-	450	-
3.1, Table-2(Tear Strength,-Weftway)	-	450	-
3.1, Table-2(Fabric Skew, Percent, Max)	-	500	-
3.1, Table-2(Fabric Bow, Percent, Max)	-	0	-
3.1, Table-2("Dimensional Change, Percent,- Warpway/Weftway")	-	350	-
3.1, Table-2(Scouring Loss Percent, Max)	-	650	-
3.1, Table-2(pH Value)	-	350	-
3.1, Table-2(Resistance to Pilling, For 1 000 Cycles, Min)	-	550	-
3.1, Table-3 (i)("Light: a) Warp direction b) Weft direction")	-	1650	-
3.1, Table-3 (ii)("Washing: a) Change in colour b) Staining of adjacent fabrics")	-	400	-
3.1, Table-3 (iii)(Bleaching: Hypochlorite)	-	350	-
3.1, Table-3 (iv)("Rubbing: a) Dry b) Wet")	-	300	-
3.1, Table-3 (v)("Perspiration, acidic and alkaline: a) Change in colour b) Staining of adjacent fabrics")	-	500	-
3.2(Fabric Content)	-	950	-
3.3(Freedom from Defects)	-	200	-
3.4(Sewing Thread)	-	850	-
3.5(Hems)	-	600	-
3.6(Sewing)	-	200	-
3.7, Table-4(- Size)	-	0	-
3.7, Table-4(Width,cm)	-	200	-
3.7, Table-4(Length, cm)	-	200	-
Cl-3.10(Whiteness Index)	-	18600	-

-
Included w.e.f 04.03.2025 Exclusion: Cl-3.8 (Soil Release Efficiency), Cl-3.9 (Antimicrobial Activity)

7609

BIS, Eastern Regional Laboratory (ERL)

None

IS 4759 (1996)

Hot - Dip zinc coatings on structural steel and other allied products - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1 Table 1, 9.2, 9.2.1 ,9.2.2 (Msaa of Zinc Coating - IS 4759 IS 6745 IS 3203 IS 6012 )	-
9.4 (Adhesion of Galvanizing coating - IS 2629 )	-
6.2 & 6.4 (Freedom from Defects - IS 4759)	-
9.3 (Uniformity of Zinc Coating - IS 4759 IS 2633 )	-
10 (Marking)	-
9.3 (Uniformity of Zinc Coating - IS 4759 IS 2633 )	-
6.2 & 6.4 (Freedom from Defects - IS 4759)	-
6.1 Table 1, 9.2, 9.2.1 ,9.2.2 (Msaa of Zinc Coating - IS 4759 IS 6745 IS 3203 IS 6012 )	-
9.4 (Adhesion of Galvanizing coating - IS 2629 )	-
6.2 & 6.4 (Freedom from Defects - IS 4759)	-
6.1 Table 1, 9.2, 9.2.1 ,9.2.2 (Msaa of Zinc Coating - IS 4759 IS 6745 IS 3203 IS 6012 )	-
9.3 (Uniformity of Zinc Coating - IS 4759 IS 2633 )	-
9.4 (Adhesion of Galvanizing coating - IS 2629 )	-
6.2 & 6.4 (Freedom from Defects - IS 4759)	-
6.1 Table 1, 9.2, 9.2.1 ,9.2.2 (Msaa of Zinc Coating - IS 4759 IS 6745 IS 3203 IS 6012 )	-
9.3 (Uniformity of Zinc Coating - IS 4759 IS 2633 )	-
9.4 (Adhesion of Galvanizing coating - IS 2629 )	-
6.2 & 6.4 (Freedom from Defects - IS 4759)	-

-
Mech: Complete

7610

Ahmedabad Textile Industry's Research Association (ATIRA), Ahmedabad

7173002

IS 7056 (2024)

Textiles ï¿½ Cotton Towelling and Towels ï¿½ Specification (Second revison)

11300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-3.1, Table-1(Count of Yarn, Ne)	-	450	-
Cl-3.1, Table-1(Threads per dm, Min)	-	300	-
Cl-3.1, Table-1(Mass, Min)	-	450	-
Cl-3.1, Table-1(Terry Ratio, Min)	-	550	-
Cl-3.1, Table-2(Count of Yarn, Ne)	-	0	-
Cl-3.1, Table-2(Threads per dm Min)	-	0	-
Cl-3.1, Table-2(Mass, Min)	-	0	-
Cl-3.2.1, Table-3 (i)(Identification of material)	-	500	-
Cl-3.2.1, Table-3 (ii)(Breaking load on 5.0 cm × 20 cm strips Min)	-	900	-
Cl-3.2.1, Table-3 (iii)(Scouring loss, percent, Max)	-	650	-
Cl-3.2.1, Table-3 (iv)(Dimensional change, percent, Max)	-	350	-
Cl-3.2.1, Table-3 (v)(pH value)	-	350	-
Cl-3.2.1, Table-3 (vi)(Wettability, Max)	-	550	-
Cl-3.2.1, Table-3 (vii), a(Minimum Colour Fastness Rating to Light)	-	1650	-
Cl-3.2.1, Table-3 (vii), b(Minimum Colour Fastness Rating to Washing)	-	400	-
Cl-3.2.1, Table-3 (vii), c(Minimum Colour Fastness Rating to Hypochlorite)	-	450	-
Cl-3.2.2(Whiteness index)	-	550	-
Cl-3.3(Freedom from Defects)	-	200	-
Cl-3.4, Table-4(Minimum Dimensions-Width)	-	200	-
Cl-3.4, Table-4(Minimum Dimensions-Length)	-	200	-
Cl-3.5, Table-4(Maximum depth of plain heading)	-	200	-
Cl-3.6 (a)(Cotton sewing thread)	-	350	-
Cl-3.6 (b)(Polyester sewing thread)	-	650	-
Cl-3.7(Transverse Ends or End Hems)	-	600	-
Cl-3.8(Side Edges)	-	600	-
Cl-3.9(Stitching)	-	200	-
Cl-3.1, Table-1(Count of Yarn, Ne)	-	0	-
Cl-3.1, Table-1(Threads per dm, Min)	-	0	-
Cl-3.1, Table-1(Mass, Min)	-	0	-
Cl-3.1, Table-1(Terry Ratio, Min)	-	0	-
Cl-3.1, Table-2(Count of Yarn, Ne)	-	0	-
Cl-3.1, Table-2(Threads per dm Min)	-	0	-
Cl-3.1, Table-2(Mass, Min)	-	0	-
Cl-3.2.1, Table-3 (i)(Identification of material)	-	0	-
Cl-3.2.1, Table-3 (ii)(Breaking load on 5.0 cm × 20 cm strips Min)	-	0	-
Cl-3.2.1, Table-3 (iii)(Scouring loss, percent, Max)	-	0	-
Cl-3.2.1, Table-3 (iv)(Dimensional change, percent, Max)	-	0	-
Cl-3.2.1, Table-3 (v)(pH value)	-	0	-
Cl-3.2.1, Table-3 (vi)(Wettability, Max)	-	0	-
Cl-3.2.1, Table-3 (vii), a(Minimum Colour Fastness Rating to Light)	-	0	-
Cl-3.2.1, Table-3 (vii), b(Minimum Colour Fastness Rating to Washing)	-	0	-
Cl-3.2.1, Table-3 (vii), c(Minimum Colour Fastness Rating to Hypochlorite)	-	0	-
Cl-3.2.2(Whiteness index)	-	0	-
Cl-3.3(Freedom from Defects)	-	0	-
Cl-3.4, Table-4(Minimum Dimensions-Width)	-	0	-
Cl-3.4, Table-4(Minimum Dimensions-Length)	-	0	-
Cl-3.5, Table-4(Maximum depth of plain heading)	-	0	-
Cl-3.6 (a)(Cotton sewing thread)	-	0	-
Cl-3.6 (b)(Polyester sewing thread)	-	0	-
Cl-3.7(Transverse Ends or End Hems)	-	0	-
Cl-3.8(Side Edges)	-	0	-
Cl-3.9(Stitching)	-	0	-
Cl-3.1, Table-1(Count of Yarn, Ne)	-	0	-
Cl-3.1, Table-1(Threads per dm, Min)	-	0	-
Cl-3.1, Table-1(Mass, Min)	-	0	-
Cl-3.1, Table-1(Terry Ratio, Min)	-	0	-
Cl-3.1, Table-2(Count of Yarn, Ne)	-	0	-
Cl-3.1, Table-2(Threads per dm Min)	-	0	-
Cl-3.1, Table-2(Mass, Min)	-	0	-
Cl-3.2.1, Table-3 (i)(Identification of material)	-	0	-
Cl-3.2.1, Table-3 (ii)(Breaking load on 5.0 cm × 20 cm strips Min)	-	0	-
Cl-3.2.1, Table-3 (iii)(Scouring loss, percent, Max)	-	0	-
Cl-3.2.1, Table-3 (iv)(Dimensional change, percent, Max)	-	0	-
Cl-3.2.1, Table-3 (v)(pH value)	-	0	-
Cl-3.2.1, Table-3 (vi)(Wettability, Max)	-	0	-
Cl-3.2.1, Table-3 (vii), a(Minimum Colour Fastness Rating to Light)	-	0	-
Cl-3.2.1, Table-3 (vii), b(Minimum Colour Fastness Rating to Washing)	-	0	-
Cl-3.2.1, Table-3 (vii), c(Minimum Colour Fastness Rating to Hypochlorite)	-	0	-
Cl-3.2.2(Whiteness index)	-	0	-
Cl-3.3(Freedom from Defects)	-	0	-
Cl-3.4, Table-4(Minimum Dimensions-Width)	-	0	-
Cl-3.4, Table-4(Minimum Dimensions-Length)	-	0	-
Cl-3.5, Table-4(Maximum depth of plain heading)	-	0	-
Cl-3.6 (a)(Cotton sewing thread)	-	0	-
Cl-3.6 (b)(Polyester sewing thread)	-	0	-
Cl-3.7(Transverse Ends or End Hems)	-	0	-
Cl-3.8(Side Edges)	-	0	-
Cl-3.9(Stitching)	-	0	-

-
Included w.e.f 04.03.2025

7611

PIONEER TESTING LABORATORY PRIVATE LIMITED

8176806

IS 12406 (2021)

Medium density fibre boards for general purpose - Specification

All

12900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clauses 5.2, 9 and 10.2.2(Density)	-	750	-
Clauses 5.2, 9 and 10.2.2(Density)	-	750	-
Clauses 5.2, 9 and 10.2.2(Variation from mean density)	-	750	-
Clauses 5.2, 9 and 10.2.2(Moisture Content)	-	750	-
Clauses 5.2, 9 and 10.2.2(Variation from mean moisture content)	-	750	-
Clauses 5.2, 9 and 10.2.2(Linear expansion (Thickness Swelling in Water) Due to general Absorption after 24h soaking)	-	1500	-
Clauses 5.2, 9 and 10.2.2(Internal Bond Strength)	-	1500	-
Clauses 5.2, 9 and 10.2.2(Internal Bond strength (i) (After Cyclic test) (ii) (After accelerated water resistance test))	-	1500	-
Clauses 5.2, 9 and 10.2.2(Modulus of Rupture a) Avg. Value b) Min. Individual)	-	2500	-
Clauses 5.2, 9 and 10.2.2(Modulus of Elasticity a) Avg. Value b) Min. Individual)	-	2500	-
Clauses 5.2, 9 and 10.2.2(Screw withdrawl strength (i) Face (ii) Edge (For thickness >12mm))	-	1500	-
Clauses 5.2, 9 and 10.2.2(Formaldehyde Content (i) For Formaldehyde Class, E1 (ii) For Formaldehyde Class, E2)	-	3500	-
Clauses 5.2, 9 and 10.2.2(Steady State Formaldehyde emission (Fc (i) For Formaldehyde Class, E1 (ii) For Formaldehyde Class, E2)	-	3500	-
8(DIMENSIONS AND TOLERANCES)	-	1000	-
Cl-11(ADDITIONAL REQUIREMENTS FOR ECO-MARK)	-	0	-
Cl 7(Finish)	-	500	-
Clauses 5.2, 9 and 10.2.2(Density)	-	750	-
Clauses 5.2, 9 and 10.2.2(Density)	-	750	-
Clauses 5.2, 9 and 10.2.2(Variation from mean density)	-	750	-
Clauses 5.2, 9 and 10.2.2(Moisture Content)	-	1000	-
Clauses 5.2, 9 and 10.2.2(Variation from mean moisture content)	-	1000	-
Clauses 5.2, 9 and 10.2.2(Linear expansion (Thickness Swelling in Water) Due to general Absorption after 24h soaking)	-	750	-
Clauses 5.2, 9 and 10.2.2(Internal Bond Strength)	-	1500	-
Clauses 5.2, 9 and 10.2.2(Internal Bond strength (i) (After Cyclic test) (ii) (After accelerated water resistance test))	-	1500	-
Clauses 5.2, 9 and 10.2.2(Modulus of Rupture a) Avg. Value b) Min. Individual)	-	2500	-
Clauses 5.2, 9 and 10.2.2(Modulus of Elasticity a) Avg. Value b) Min. Individual)	-	2500	-
Clauses 5.2, 9 and 10.2.2(Screw withdrawl strength (i) Face (ii) Edge (For thickness >12mm))	-	1500	-
Clauses 5.2, 9 and 10.2.2(Formaldehyde Content (i) For Formaldehyde Class, E1 (ii) For Formaldehyde Class, E2)	-	2500	-
Clauses 5.2, 9 and 10.2.2(Steady State Formaldehyde emission (Fc (i) For Formaldehyde Class, E1 (ii) For Formaldehyde Class, E2)	-	2500	-
8(DIMENSIONS AND TOLERANCES)	-	1500	-
Cl-11(ADDITIONAL REQUIREMENTS FOR ECO-MARK)	-	0	-
Cl 7(Finish)	-	500	-

-
Included w.e.f 20.05.2025

7612

Rajkot Metlab Services LLP, Rajkot

7183706

IS 4992 (2024)

Door Handles for Mortice Locks â Specification (Second Revision)

19900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-6.1(Fastening Elements and Spindle)	-	1000	-
Cl-6.2, Table-2 (i) a(Axial strength percent)	-	5000	-
Cl-6.2, Table-2 (i) b(Pre-load)	-	3000	-
Cl-6.2, Table-2 (i) c(Permanent deformation)	-	3000	-
Cl-6.3(Safety Requirements)	-	1000	-
Cl-6.4, Table-3 (1) a(Number of cycles)	-	10000	-
Cl-6.4, Table-3 (1) b(Force “P”)	-	5000	-
Cl-6.5(Corrosion Resistance)	-	5000	-
Cl-6.6(Fire Resistance Test)	-	5000	-
Cl-8(Marking)	-	1000	-
Cl-6.1(Fastening Elements and Spindle)	-	1000	-
Cl-6.2, Table-2 (i) a(Axial strength percent)	-	5000	-
Cl-6.2, Table-2 (i) b(Pre-load)	-	3000	-
Cl-6.2, Table-2 (i) c(Permanent deformation)	-	3000	-
Cl-6.3(Safety Requirements)	-	1000	-
Cl-6.4, Table-3 (1) a(Number of cycles)	-	10000	-
Cl-6.4, Table-3 (1) b(Force “P”)	-	5000	-
Cl-6.5(Corrosion Resistance)	-	5000	-
Cl-6.6(Fire Resistance Test)	-	5000	-
Cl-8(Marking)	-	1000	-
Cl-6.1(Fastening Elements and Spindle)	-	1000	-
Cl-6.2, Table-2 (i) a(Axial strength percent)	-	5000	-
Cl-6.2, Table-2 (i) b(Pre-load)	-	3000	-
Cl-6.2, Table-2 (i) c(Permanent deformation)	-	3000	-
Cl-6.3(Safety Requirements)	-	1000	-
Cl-6.4, Table-3 (1) a(Number of cycles)	-	10000	-
Cl-6.4, Table-3 (1) b(Force “P”)	-	5000	-
Cl-6.5(Corrosion Resistance)	-	5000	-
Cl-6.6(Fire Resistance Test)	-	5000	-
Cl-8(Marking)	-	1000	-

12 Jan, 2028

-
Included w.e.f 17.06.2025

7613

BIS, Eastern Regional Laboratory (ERL)

None

IS 7138 (1973)

Specification for steel tubes for furniture purposes

For all sizes

1125 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 (DIMENSIONS)	-
4.1(Table 1) (WALL THICKNESS)	-
4.2 (Tolerance)	-
5 (WORKMANSHIP)	-
7 (STRAIGHTNESS)	-
8 (LENGTHS)	-
9.1 (Tensile Test)	-
9.2 (Bend test)	-
6 (HEAT TREATMENT)	-
9.3 (Retest)	-

-
-

7614

BIS, Eastern Regional Laboratory (ERL)

None

IS 412 (1975)

Specification for expanded metal steel sheets for general purposes (Second Revision)

For all sizes

Rs.1125/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
10 (Preservating treatment)	-
9 (Freedom from defects)	-
7.1 (Cold bend test)	-
5.2.3 (Properties and Dimensions,Size of the mesh)	-
5.2.2,Table 1 (Properties and Dimensions,Mass)	-
5.2,Table1 (Properties and Dimensions,Width)	-
5.2,Table1 (Properties and Dimensions,thickness)	-
10 (Preservating treatment)	-
9 (Freedom from defects)	-
7.1 (Cold bend test)	-
5.2.3 (Properties and Dimensions,Size of the mesh)	-
5.2.2,Table 1 (Properties and Dimensions,Mass)	-
5.2,Table1 (Properties and Dimensions,Width)	-
5.2,Table1 (Properties and Dimensions,thickness)	-
Cl. 3.2 (Nitrogen)	-
Cl. 3.2 (Phosphorus)	-
Cl. 3.2 (Sulphur)	-

-
-

7615

BIS, Eastern Regional Laboratory (ERL)

None

IS 3954 (1991)

Hot Rolled Steel Channel Sections for General Engineering Purposes - Dimensions

For all sizes

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

-
Mech: Complete

7616

BIS, Eastern Regional Laboratory (ERL)

None

IS 2255 (1977)

Specification for mild steel wire rod for the manufacture of machine screws (By Cold Heading Process) (Second Revision)

600/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7 (Sizes and tolernces)	-
8 (FREEDOM FROM DEFECTS)	-
Cl. 5.1 (Carbon- Relevant parts of IS 228.)	-
Cl. 5.1 (Sulphur- Relevant parts of IS 228.)	-
Cl. 5.1 (Phosphorus- Relevant parts of IS 228.)	-
Cl. 5.1 (Manganese- Relevant parts of IS 228.)	-

-
Chem: Complete

7617

Atharva Laboratories Pvt. Ltd. (D115A), Noida (8134206)

8134206

IS 3854 (2023)

Switches for Domestic and Similar Purposes - Specification (Third Revision)

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General Requirements)	-	100	-
Cl-5(General notes on tests)	-	100	-
Cl-6(Rating)	-	100	-
Cl-7(Classification)	-	100	-
Cl-8(Marking)	-	100	-
Cl-9(Checking of dimensions)	-	100	-
Cl-10.1, 10.2(Prevention of Access to Live Parts)	-	200	-
Cl-10.3(Requirements for Accessible Metal Parts)	-	200	-
Cl-10.4(Requirements for Insulation of the Mechanism)	-	200	-
Cl. 10.5(Requirements for Insulation of the Mechanism with Respect to the Surrounding Environment)	-	200	-
Cl-10.6(Requirements for Switches Operated Indirectly)	-	200	-
Cl-10.7(Requirements for Switches with Replaceable Pull Cord)	-	200	-
Cl-11(Provision for earthing)	-	200	-
Cl-12(Terminals)	-	200	-
Cl-13(Constructional requirements)	-	200	-
Cl-14(Mechanism)	-	200	-
Cl-15.1(Resistance to Ageing)	-	1000	-
Cl-15.2(Protection Provided by Enclosures of Switches)	-	500	-
Cl-15.3(Resistance to Humidity)	-	1000	-
Cl-16.1(General)	-	100	-
Cl-16.2(Test for Measuring the Insulation Resistance)	-	200	-
Cl-16.3(Electric Strength Test)	-	500	-
Cl-17(Temperature rise)	-	1000	-
Cl-18(Making and breaking capacity)	-	100	-
Cl-19(Normal operation)	-	1800	-
Cl-20(Mechanical strength)	-	500	-
Cl-21(Resistance to heat)	-	500	-
Cl-22(Screws, current carrying parts and connections)	-	500	-
Cl-23(Creepage distances, clearances and distance through sealing compound)	-	100	-
Cl-24.1(Resistance to abnormal heat and fire)	-	500	-
Cl-24.2(Resistance to tracking)	-	500	-
Cl-25(Resistance to rusting)	-	500	-
19.1(Test for Switches Intended for Inductive Loads)	-	0	-
19.2(Test for Switches Intended for Externally Ballasted Lamp Loads)	-	0	-
19.3(Test for Switches Intended for Self-ballasted Lamp Loads)	-	0	-
13.5(Attachment of knobs)	-	100	-
12.3.11(Table 11)(Test Current for the Verification of Electrical and Thermal Stresses in Normal Use of Screwless Terminals)	-	100	-
12.3.12(Table 13)(Deflection Test Forces)	-	100	-

21 Jul, 2028

-
Included .w.e.f.06.02.2025

7618

PIONEER TESTING LABORATORY PRIVATE LIMITED

8176806

IS 2191 : Part 2 (2022)

WOODEN FLUSH DOOR SHUTTERS (CELLULAR, HOLLOW AND TUBULAR CORE TYPE) - SPECIFICATION PART 2 PARTICLE BOARD, HIGH DENSITY FIBRE BOARD, MEDIUM DENSITY FIBRE BOARD AND FIBRE HARDBOARD FACE PANELS (Fourth Revision)

All

20600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5(Sizes and Tolerances)	-	1000	-
Cl-6.1.(Timber)	-	0	-
Cl-6.2(Laminated veneer lumber (LVL), veneer laminated lumber (VLL), medium density fibre board (MDF), high density fibre board (HDF))	-	0	-
Cl-6.3.1(Particle board)	-	0	-
Cl-6.3.2(MDF board and HDF board)	-	0	-
Cl-6.3.5(shutters with fibre hardboard face)	-	0	-
Cl-8.1(Locks)	-	500	-
Cl-10.1(various test)	-	1000	-
Cl-10.2(End Immersion Test)	-	1500	-
Cl-10.3(Glue Adhesion Test)	-	1200	-
Cl-13(Marking)	-	500	-
Cl-5(Sizes and Tolerances)	-	1500	-
Cl-6.1.(Timber)	-	0	-
Cl-6.2(Laminated veneer lumber (LVL), veneer laminated lumber (VLL), medium density fibre board (MDF), high density fibre board (HDF))	-	2500	-
Cl-6.3.1(Particle board)	-	0	-
Cl-6.3.2(MDF board and HDF board)	-	0	-
Cl-6.3.5(shutters with fibre hardboard face)	-	0	-
Cl-8.1(Locks)	-	0	-
Cl-10.1(various test)	-	1000	-
Cl-10.2(End Immersion Test)	-	2000	-
Cl-10.3(Glue Adhesion Test)	-	2000	-
Cl-13(Marking)	-	0	-

-
Included w.e.f 23.05.2025

7619

Bombay Textiles Research Association (BTRA), Mumbai

7130206

IS 863 (2023)

Medical Textiles - Cotton bandage cloth - Specification third revision of IS 863

7610 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2, Table 1, i)(Count of yarn (for guidance only))	-	510	-
4.2, Table 1, ii)(Threads, dm, Min)	-	510	-
4.2, Table 1, iii)(Mass, g/m2)	-	510	-
4.2, Table 1, iv)(Length, m, tolerance)	-	510	-
4.2, Table 1, v)(Width, m, tolerance)	-	510	-
4.1(Fibre Identification)	-	760	-
4.2, Table 1, vi)(pH value of acqueous extract)	-	510	-
4.2, Table 1, vii)(Scouring loss, percent, Max)	-	1010	-
4.2, Table 1, viii)(Freedom from optical whiteners)	-	760	-
4.2, Table 1, ix)(Colour fastness: a) Light)	-	1510	-
4.2, Table 1, ix)(Colour fastness: b) Washing (A1))	-	510	-
4.2, Table 1, x)(Sterility (optional))	-	0	-
4.2, Table 1, i)(Count of yarn (for guidance only))	-	0	Already given
4.2, Table 1, ii)(Threads, dm, Min)	-	0	Already given
4.2, Table 1, iii)(Mass, g/m2)	-	0	Already given
4.2, Table 1, iv)(Length, m, tolerance)	-	0	Already given
4.2, Table 1, v)(Width, m, tolerance)	-	0	Already given
4.1(Fibre Identification)	-	0	Already given
4.2, Table 1, vi)(pH value of acqueous extract)	-	0	Already given
4.2, Table 1, vii)(Scouring loss, percent, Max)	-	0	Already given
4.2, Table 1, viii)(Freedom from optical whiteners)	-	0	Already given
4.2, Table 1, ix)(Colour fastness: a) Light)	-	0	Already given
4.2, Table 1, ix)(Colour fastness: b) Washing (A1))	-	0	Already given
4.2, Table 1, i)(Count of yarn (for guidance only))	-	0	-
4.2, Table 1, ii)(Threads, dm, Min)	-	0	-
4.2, Table 1, iii)(Mass, g/m2)	-	0	-
4.2, Table 1, iv)(Length, m, tolerance)	-	0	-
4.2, Table 1, v)(Width, m, tolerance)	-	0	-
4.1(Fibre Identification)	-	0	-
4.2, Table 1, vi)(pH value of acqueous extract)	-	0	-
4.2, Table 1, vii)(Scouring loss, percent, Max)	-	0	-
4.2, Table 1, viii)(Freedom from optical whiteners)	-	0	-
4.2, Table 1, ix)(Colour fastness: a) Light)	-	0	-
4.2, Table 1, ix)(Colour fastness: b) Washing (A1))	-	0	-

-
Included w.e.f 26.05.2025 Exclusion: Cl 4.2, Table 1, x) (Sterility (optional))

7620

Atmy Analytical Labs Private Limited (Unit-2), Greater Noida

8176106

IS 1554 : Part 1 (1988)

Specification for pvc insulated (Heavy Duty) electric cables: Part 1 for working voltages up to and including 1100 v (Third Revision)

ALL

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1(MATERIALS : CONDUCTOR)	-	0		0
4.1.1(INSULATION : General Purjose Insulaiion)	-	0		0
4.1.2(INSULATION : Heat Resisting Insulation)	-	0		0
5.1(MATERIALS : FILLER AND INNER SHEATH)	-	0		0
5.2(MATERIALS : FILLER AND INNER SHEATH)	-	0		0
6.1(MATERIALS : ARMGURING)	-	0		0
6.2(MATERIALS : ARMGURING)	-	0		0
7.1.1(OUTER SHEATH : For Cables with General Purpose InsuIafion)	-	0		0
7.1.2(OUTER SHEATH : For Cables with Heat Resisting InsuIalion)	-	0		0
8.1(CONSTRUCTION : CONDUCTOR)	-	0		0
8.2(CONSTRUCTION : CONDUCTOR)	-	0		0
9.1(INSULATION )	-	0		0
9.2(INSULATION : Thickness of Insulation)	-	0		0
9.3(INSULATION :Tolerance on Thickness of Insulation)	-	0		0
9.4(INSULATION : Application of Insulation)	-	0		0
10.1(CORE IDENTIFICATION)	-	0		0
10.2(CORE IDENTIFICATION)	-	0		0
10.3(CORE IDENTIFICATION)	-	0		0
10.3.1(Arrangement of Marking)	-	0		0
11.1(LAYING UP OF CORES)	-	0		0
11.2(LAYING UP OF CORES)	-	0		0
12.1(INNER SHEATH)	-	0		0
12.2(INNER SHEATH)	-	0		0
12.3(INNER SHEATH :Thickness of Inner Sheath)	-	0		0
12.3.1(INNER SHEATH :Thickness of Inner Sheath)	-	0		0
13.1.1(ARMOURING : Application)	-	0		0
13.1.2(Armouring: Coverage )	-	0		0
13.1.3(ARMOURING : Direction of lay )	-	0		0
13.1.4(ARMOURING : Application)	-	0		0
13.2(ARMOURING : Type of Armour)	-	0		0
13.2.1(ARMOURING : Type of Armour)	-	0		0
13.3(Armouring : Dimensions -Wire Diameter)	-	0		0
13.3(Armouring : Dimensions -Formed wire )	-	0		0
13.4(ARMOURING : Joints)	-	0		0
13.5.1(ARMOURING : Resistance)	-	0		0
13.5.2(ARMOURING : Resistance)	-	0		0
13.6 a)(ARMOURING: Tensile Strength)	-	0		0
13.6 b)(ARMOURING: Elongation )	-	0		0
13.6 c)(ARMOURING: Torsion Test (For round wire ) )	-	0		0
13.6 d)(ARMOURING: Winding Test(For formed wire))	-	0		0
13.6 e)(ARMOURING: Uniformity of zinc coating)	-	0		0
13.6 f)(ARMOURING: Mass of zinc coating )	-	0		0
13.6 g)(ARMOURING: Resistivity)	-	0		0
14.1(OUTER SHEATH)	-	0		0
14.2(OUTER SHEATH)	-	0		0
14.3(OUTER SHEATH : Colour )	-	0		0
14.4.1(Thickness of Outer Sheath : Unarmowed Cables)	-	0		0
14.4.2(Thickness of Outer Sheath : Armoured Cables)	-	0		0
15.1 a) 1)(Tests on conductor : Annealing test ( for copper ))	-	0		0
15.1 a) 2)(Tensile test (for aluminium) - Before stranding )	-	0		0
15.1 a) 2)(Tensile test (for aluminium) - After stranding )	-	0		0
15.1 a) 3)(Tests on conductor : Wrapping test ( for aluminium ))	-	0		0
15.1 a) 4)(Tests on conductor : Conductor resistance test)	-	0		0
15.1 a) 4)(Resistance test - Neutral conductor )	-	0		0
15.1 d)1)(Phyaical tests for insulation : Tensile Test)	-	0		0
15.1 d)1)(Phyaical tests for insulation : Elongation )	-	0		0
15.1 d)1)(Physical tests for sheath : Tensile stregth )	-	0		0
15.1 d)1)(Physical tests for sheath : Elongation )	-	0		0
15.1 d)2)(Phyaical tests for insulation- Ageing in air Oven : Tensile Test)	-	0		0
15.1 d)2)(Phyaical tests for insulation - Ageing in air oven : Elongation )	-	0		0
15.1 d)2)(Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-	0		0
15.1 d)2)(Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-	0		0
15.1 d)2)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-	0		0
15.1 d)2)(Physical tests for outer sheath -Ageing in air oven : Elongation )	-	0		0
15.1 d)2)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation )	-	0		0
15.1 d)2)(Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-	0		0
15.1 d)3)(Phyaical tests for insulation : Shrinkage )	-	0		0
15.1 d)3)(Phyaical tests for insulation : Shrinkage - Crack observed )	-	0		0
15.1 d)3)(Phyaical tests for Sheath : Shrinkage )	-	0		0
15.1 d)3)(Phyaical tests for Sheath : Shrinkage - Crack observed )	-	0		0
15.1 d)4)(Hot deformation : Insulation )	-	0		0
15.1 d)4)(Hot deformation : Sheath )	-	0		0
15.1 d)5)( Loss of mass in air oven- Insulation )	-	0		0
15.1 d)5)( Loss of mass in air oven- sheath )	-	0		0
15.1 d)6)(Heat shock test- Insulation )	-	0		0
15.1 d)6)(Heat shock test- sheath )	-	0		0
15.1 d)7)(Thermal stability- insulation )	-	0		0
15.1 d)7)(Thermal stability- Sheath )	-	0		0
15.1 e)(Insulation resistance test : Volume Resistivity )	-	0		0
15.1 e)(Insulation resistance test : IR Constant )	-	0		0
15.1 f)(High voltage test ( water immersion test ))	-	0		0
15.1 g)(High voltage test at room temperature)	-	0		0
15.1 g)(High voltage test at room temperature)	-	0		0
15.4 a)(Cold bend test- Insulation ( Optional test))	-	0		0
15.4 a)(Cold bend test- Sheath ( Optional test))	-	0		0
15.4 b)(Cold impact test- Insulation ( Optional test))	-	0		0
15.4 b)(Cold impact test- Sheath ( Optional test))	-	0		0
15.4 c)(Armour resistance test ( for other than mining cables ).- Optional test )	-	0		0
16.1(DETAILS OF TESTS : General)	-	0		0
16.2(DETAILS OF TESTS : High Voltage Test at Room Temperature)	-	0		0
16.3.1(High Voltage Test ( Water Immersion Test ) : a.c. Test)	-	0		0
16.3.2(High Voltage Test ( Water Immersion Test ) : d.c. Test)	-	0		0
16.4(Flammability Test)	-	0		0
16.5(Oxygen Index Test)	-	0		0
16.6(Flame Retardance Test on Single Cables)	-	0		0
16.7(Flame Retardance Test on Bunched Cables)	-	0		0
16.9(Test for Halogen Acid Gas Evolution)	-	0		0
16.1(Temperature Index)	-	0		0
17.1(IDENTIFICATION : Manufacturer’s Identification)	-	0		0
17.2(IDENTIFICATION : Cable Identification)	-	0		0
17.2.1(IDENTIFICATION : Cable Identification)	-	0		0
17.3(IDENTIFICATION : Cable Code)	-	0		0
15.1.e(Insulation resistance Test- Insulation resistance At Maximum rated temperature temperature)	-	0		0
15.1.e(Insulation resistance Test- Insulation resistance constant At Room temperature)	-	0		0
15.1.e(Insulation resistance Test- Volume Resistivity At Maximum rated temperature temperature)	-	0		0
15.1.e(Insulation resistance Test- Volume Resistivity At Room temperature)	-	0		0
16.4(Flammability Test- Un affected portion)	-	0		0
16.4(Flammability Test- Period of Burning)	-	0		0
9.3(Minimum Thickness of Reduce core insulation)	-	0		0
9.2(Thickness of Reduce core insulation)	-	0		0
3.1 Table 2 IS 8130(Number of wires in the conductor)	-	0		0
Cl No. 16.10(Smoke density test)	-	0		0
Cl No. 16.8(Test for specific optical density of smoke)	-	0		0
Table 4(Copper purity test)	-	0		0
Cl.8(Conductor, Number of wires.)	-	0		0
Cl.8(Conductor, Number of wires.)	-	0		0
Cl.8(Flexibility class)	-	0		0
[(Cl.15), (d), 2](After ageing, Elongation of Sheath [Percentage])	-	0		0

08 Feb, 2027

-
Included w.e.f 09.04.2025

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number

No Record Found