BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15471 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

7561

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY (CIPET) : IPT-BHUBANESWAR

5102634

IS 17374 (2020)

Geosynthetics – Reinforced HDPE membrane for effluents and chemical resistance lining – Specification

Geosynthetics — Reinforced HDPE Membrane for Effluents

153789.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause No. 3.1(Reinforced HDPE Membrane)	-	2000.00	NIL
Clause No. 5.3, Table No. 1, (i)(Thickness (mm))	-	250.00	NIL
Clause No. 5.3, Table No. 1, (ii)(Mass (g/m2))	-	250.00	NIL
Clause No. 5.3, Table No. 1, (iii)(Dimensions (length and width))	-	250.00	NIL
Clause No. 3.1, Table No. 1, (iv)(Carbon black content, percent)	-	924.98	NIL
Clause No. 3.1, Table No. 1, (v)(Carbon black dispersion)	-	949.98	NIL
Clause No. 5.3, Table No. 1, (vi)(Breaking load on 20 cm × 10 cm strip before UV exposure, N)	-	3800.00	NIL
Clause No. 5.3, Table No. 1, (vii)(Strain at maximum load, percent)	-	1099.99	NIL
Clause No. 5.3, Table No. 1, (viii)(Retention of breaking load on 20 cm × 10 cm strip after UV exposure of 144 h)	-	10460.00	NIL
Clause No. 5.3, Table No. 1, (ix)(Impact failure load, at 1524 mm drop, Min gram force at 50 percent failure)	-	1100.00	NIL
Clause No. 5.3, Table No. 1, (x)(Tear resistance, N)	-	1099.98	NIL
Clause No. 5.3, Table No. 1, (xi)(Puncture resistance, N)	-	1100.00	NIL
Clause No. 5.3, Table No. 1, (xii)(Bursting strength (Ball burst), N/cm2)	-	1100.00	NIL
Clause No. 5.3, Table No. 1, (xiii)(Seam strength before UV exposure, N/mm)	-	1350.00	NIL
Clause No. 5.3, Table No. 1, (xv)(Hydrostatic resistance before UV exposure, kg/cm2)	-	1000.00	NIL
Clause No. 5.3, Table No. 1, (xvi)(Hydrostatic resistance after UV exposure of 144 h, kg/cm2)	-	1000.00	NIL
Clause No. 5.3, Table No. 1, (xvii)(Low temperature crack resistance at minus 30 °C ± 1°C)	-	1600.00	NIL
Clause No. 5.3, Table No. 1, (xviii)(Oxidative induction time (OIT), minutes, (a) Standard OIT or (b) High Pressure OIT)	-	4399.98	NIL
Clause No. 5.3, Table No. 1, (xix)(Oven ageing at 85°C, Retention of oxidative induction time (OIT) after 90 days, percent, (a) Standard OIT or (b) High Pressure OIT)	-	58400.00	NIL
Clause No. 5.3, Table No. 1, (xx)(Stress crack resistance, h)	-	1199.98	NIL
Clause No. 5.3, Table No. 1, (xxi)(Abrasion resistance)	-	875.00	NIL
Clause No. 5.3, Table No. 1, (xxii)(Ash content, percent)	-	949.98	NIL
Clause No. 5.4, Table No. 2, (i)(Change in weight, percent)	-	38800.00	NIL
Clause No. 5.4, Table No. 2, (ii)(Change in volume, percent)	-	0.00	NIL
Clause No. 5.4, Table No. 2, (iii)(Visual observations)	-	299.98	NIL
Clause No. 5.4, Table No. 2, (iv)(Change in tensile strength, percent)	-	0.00	NIL
Clause No. 5.4, Table No. 2, (v)(Change in elongation, percent)	-	1100.00	NIL
Clause No. 5.4, Table No. 2, (vi)(Change in 2 percent secant modulus, percent)	-	1099.98	NIL
Clause No. 5.4, Table No. 2, (vii)(Change in seam strength, percent)	-	1100.00	NIL
3.1(MATERIAL AND MANUFACTURE - -HDPE membrane -UV stablised or carbon black stablised LDPE or LLDPE shall contain minimum 2.5 percent of carbon black)	-	1999.98	NIL
3.2(MATERIAL AND MANUFACTURE - A suitable multi-layer membrane with adequate number of layers shall be produced using a combination of HDPE fabric and layers of coating film)	-	299.98	NIL

31 Dec, 2026

-
-

7562

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY (CIPET) : IPT-BHUBANESWAR

5102634

IS 8069 (1989)

High density polyethylene (HDPE) woven sacks for packing pesticides – Specification (second revision)

High density polyethylene (HDPE) woven sacks for packin

6513.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Fabric)	-	2000.00	NIL
3.2(Sacks)	-	0.00	NIL
3.3(Liner)	-	1999.98	NIL
3.4(Lamination)	-	2000.00	NIL
3.5(Seam)	-	250.00	NIL
3.6(Mouth of sack)	-	249.99	NIL
3.7(Handles)	-	0.00	NIL
3.8(Capacity)	-	500.00	NIL
4.1, Table 1 (i) (a)(Breaking strength of fabric, (a) Widthwise)	-	1350.00	NIL
4.1, Table 1 (i) (b)(Breaking strength of fabric, (b) Lengthwise)	-	1099.98	NIL
4.1, Table 1 (ii) (a)(Seam breaking strength (a) Side seam)	-	1099.99	NIL
4.1, Table 1 (ii) (b)(Seam breaking strength (b) Bottom seam)	-	1100.00	NIL
4.2(Dimensions)	-	500.00	NIL
4.3(Mass)	-	249.99	NIL

31 Dec, 2026

-
-

7563

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY (CIPET) : IPT-BHUBANESWAR

5102634

IS 15827 (2019)

Cladding films for greenhouse / polyhouse - Specifications (First Revision)

Cladding Films for Greenhouse / Polyhouse — Specificati

267162.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Material Identification)	-	2000.00	NIL
6.1(Appearance & surface finish)	-	300.00	NIL
6.2(Durability ref clause No. 7.5)	-	0.00	NIL
Cl. no. 6.3 & Table 2(Tensile strength & elongation at break (TD & MD))	-	1350.00	NIL
6.3(Dart Drop test)	-	1100.00	NIL
6.3(Total Visible Light Transmittance)	-	750.00	NIL
6.3(Haze)	-	749.99	NIL
6.3(Tear Strength ( MD & TD))	-	1100.00	NIL
7.4(IR eefectiveness)	-	194000.00	NIL
7.2(width)	-	250.00	NIL
7.3(Elongation under Steady Load MD)	-	1099.99	NIL
7.5(Elongation after UV Exposure MD)	-	1100.00	NIL

31 Dec, 2026

-
-

7564

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY (CIPET) : IPT-BHUBANESWAR

5102634

IS 17216 (2019)

Polyethylene Mulch Films for Agriculture and Horticulture • Specification

Polyethylene Mulch Films for Agriculture and Horticultu

458000.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.1(Density)	-	500.00	NIL
5.1.2(Melt Flow Index)	-	1100.00	NIL
5.2.1(Visual Appearance)	-	300.00	NIL
5.2.2(Film Form)	-	0.00	NIL
5.2.4(Odour)	-	249.99	NIL
5.3.1.1(Tolerance on thickness)	-	249.99	NIL
5.3.1.2(Tolerance on width)	-	250.00	NIL
5.3.2(Impact Strength)	-	1349.98	NIL
5.3.2, Table 1(Nominal Film Thickness)	-	250.00	NIL
5.3.2, Table 1(Impact Failure Mass)	-	1349.98	NIL
5.3.3(Tensile Strength at Break)	-	2699.99	NIL
5.3.4(Elongation at Break)	-	0.00	NIL
5.3.5(Coefficient of Friction)	-	849.98	NIL
5.3.6(Elmendorf Tear Strength)	-	1999.98	NIL
5.3.7(Opacity)	-	575.00	NIL
5.4, Table 2(Carbon black, percent)	-	925.00	NIL
5.4, Table 2(Ash content, percent)	-	950.00	NIL
5.4, Table 2(Carbon black dispersion)	-	699.98	NIL
5.5(Service Life)	-	222580.00	NIL

31 Dec, 2026

-
-

7565

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY (CIPET) : IPT-BHUBANESWAR

5102634

IS 16703 (2017)

Textiles - High density polyethylene (HDPE) polypropylene (PP) woven sacks for packaging of 25 kg polymer materials - Specification

Textiles - High Density Polyethylene (HDPE) Polypropyle

18580.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2 Table 1(Dimensions)	-	250.00	NIL
5.2 Table 1(Ends per dm)	-	249.99	NIL
5.2 Table 1(Picks per dm)	-	250.00	NIL
5.2 Table 1(Mass of sack, Gusseted type, g - IS 1964)	-	249.99	NIL
5.2 Table 1(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70mm1)] Min, N) (kgf): - IS 1969 (Part 1))	-	15080.00	NIL
5.2 Table 1(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70mm1)] Min, N2) (kgf): - IS 1969 (Part 1))	-	1099.99	NIL
5.2 Table 1(Breaking strength of bottom seam (Ravelled strip method), Min, N) (kgf) - IS 9030)	-	1100.00	NIL
5.2 Table 1(Elongation at break of fabric (Ravelled strip method), percent : IS 1969 (Part 1))	-	0.00	NIL
5.2 Table 1(Elongation at break of fabric (Ravelled strip method), percent : IS 1969 (Part 1))	-	0.00	NIL
5.2 Table 1(Drop impact strength)	-	1100.00	NIL
(Clauses 4.2, 5.1, 5.2, 5.3 and 5.4) Table 1 (Ash Content ,a) For UV stabilized sacks)	-	949.98	NIL
(Clauses 4.2, 5.1, 5.2, 5.3 and 5.4) Table 1 (Ash Content ,b) For non- UV stabilized sacks)	-	950.00	NIL

31 Dec, 2026

-
-

7566

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY (CIPET) : IPT-BHUBANESWAR

5102634

IS 17731 (2021)

Agro-Textiles Laminated Woven Orchard Protection Covers Specification

Agro-Textiles Laminated Woven Orchard Protection Covers

16000.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause No. 7, Table 1, (i)(Thickness, mm, Min)	-	500.00	NIL
Clause no. 7, Table 1, (ii)(Mass, g/m2, Min)	-	500.00	NIL
Clause No. 7, Table 1, (iii) a("Average breaking strength of laminated woven orchard protection cover fabric (Strip method, 325 mm × 50 mm test piece with gauge length of 200 mm), N, Min, (a) Warpway")	-	1799.98	NIL
Clause No. 7, Table 1, (iii) b("Average breaking strength of laminated woven orchard protection cover fabric (Strip method, 325 mm × 50 mm test piece with gauge length of 200 mm), N, Min, (b) Weftway")	-	1300.00	NIL
Clause No. 7, Table 1, (iv)("Retention of breaking strength after UV exposure of 1000 h, percentage of original actual value (fabric), percent, Min")	-	0.00	NIL
Clause No. 7, Table 1, (iv)("Retention of breaking strength after UV exposure of 1000 h, percentage of original actual value (fabric), percent, Min")	-	0.00	NIL
Clause No. 7, Table 1, (v)(Strain at maximum load, percent)	-	1100.00	NIL
Clause No. 7, Table 1, (vi)("Impact failure load at 1524 mm drop, Min, gram force at 50 percent failure")	-	1099.98	NIL
Clause No. 7, Table 1, (vii)(Reinforcement band strength, N, Min)	-	1100.00	NIL
Clause No. 7, Table 1, (viii)(Ash content, percent, Max)	-	1199.98	NIL
Clause No. 7, Table 1, (ix)(Total visible light transmission, percent)	-	700.00	NIL
Clause No. 7, Table 1, (x)(Light diffusion, percent)	-	700.00	NIL
Clause No. 7, Table 1, (xi)(Thermicity IR effectiveness, percent)	-	1999.99	NIL
Clause No. 4.1(Width and linear density of HDPE Tapes)	-	499.99	NIL
Clause No. 4.1.1(Heat shrinkage of HDPE Tapes)	-	1100.00	NIL
Clause No. 6.1.1(Coating Lamination thickness, micron)	-	500.00	NIL
Clause No. 6.1.2(Sandwich lamination thickness , micron)	-	500.00	NIL
Clause No. 6.2(Joints/Seams)	-	500.00	NIL
Clause No. 6.3(Number and position of metal eyelets)	-	300.00	NIL
Clause No. 7.1(colour , texture and finish)	-	299.98	NIL

31 Dec, 2026

-
-

7567

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY (CIPET) : IPT-BHUBANESWAR

5102634

IS 11805 (2007)

Polyethylene pouches for packaging liquid milk - Specification - (Second Revision)

Polyethylene Pouches for Packaging Liquid Milk

4988.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.5(Thickness)	-	250.00	NIL
5.6(Width)	-	250.00	NIL
5.7(Tensile Strength)	-	2199.98	NIL
8.1(Leak Test)	-	400.00	NIL
5.9(Dart Impact Resistance)	-	850.00	NIL
8.2(Drop Test)	-	1099.99	NIL
8.3(Ink adhesion test)	-	500.00	NIL
5.10(Slip (Coefficient of Friction))	-	850.00	NIL
5.4(Odour)	-	250.00	NIL
5.1(Visual)	-	300.00	NIL
5.2(Film form)	-	0.00	NIL

31 Dec, 2026

-
-

7568

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY (CIPET) : IPT-BHUBANESWAR

5102634

IS 17897 (2022)

Stone-Polymer Composite Flooring Tiles and Planks - Specification

Stone-Polymer Composite Flooring Tiles and Planks-Speci

14150.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Workmanship, Finish, Colour & Appearance)	-	300.00	NIL
6.2(Dimensions and Tolerances (Table-1))	-	750.00	NIL
6.2(Length)	-	250.00	NIL
6.2(Width)	-	249.98	NIL
6.2(Thickness (Mean))	-	250.00	NIL
6.2("Variation (Between any two measurements) ")	-	0	NIL
6.3(Physical & Mechanical Requirements (Table-2))	-	0	NIL
6.3(". Dimensional Stability (@80±2C for 6hrs. ")	-	700.00	NIL
6.3(Visual Inspection)	-	300.00	NIL
6.3(". Peel Strength (Speed:280±25mm/min.) ")	-	1350.00	NIL
6.3(Residual Indentation)	-	1149.98	NIL
6.3(Resistance to staining, cleanability score)	-	2000.00	NIL
6.3(Abrasion Resistance, percent by weight)	-	1350.00	NIL
6.3(Gap difference)	-	500.00	NIL
6.3(Average Value)	-	0.00	NIL
6.3(MaximumValue)	-	0.00	NIL
6.3(Locking strength of both sides)	-	2600.00	NIL
6.3(Flammability test)	-	1200.00	NIL
6.3(Colour fastness to Day light exposure, standard rating)	-	1499.98	NIL

31 Dec, 2026

-
-

7569

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY (CIPET) : IPT-BHUBANESWAR

5102634

IS 17425 (2020)

Irrigation Equipment - Quick Coupled Polyethylene Pipes and Fittings for Sprinkler Irrigation Systems - Specification

40 mm to 200 mm

49544.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.6(Melt Flow Rate)	-	1100.00	NIL
4.2(Carbon black- b) Dispersion of carbon black)	-	700.00	NIL
Cl.7.1.5(Fusion Compatibility)	-	0.00	NIL
7.6(Melt now Rate (MFR))	-	2200.00	Male & Female coupler
7.5(Density)	-	1000.00	Male & Female coupler
Cl.7.1.6(Corrected Density)	-	0.0	NIL
Cl.7.1.7(MFR Test)	-	1100.00	NIL
Cl.7.2.l(Leakage Test)	-	850.00	NIL
Cl.7.2.2(Cl.7.2.2)	-	849.99	NIL
Cl.7.2.3(Weld ability Test)	-	4800.00	NIL
Cl.7.1.2(Hydraulic Characteristic)	-	1600.00	NIL
4.1(Quick Coupled Male and Female Couplers)	-	12100.00	Thermal Stability (2):4400 Volatile matter (2): 1400 Water content(2): 1400 Carbon Black content(2):1850 Carbon Black Disperssion(2): 1400 Wall thickness(2): 500.00 Workman ship &Appearance(Visual): 300 Holding attachement for coupler parts(2): 850
6.2, 6.2.1(Quick Coupled Fittings)	-	0.00	NIL
4.2.4(Quick Coupled ~pe HDPE Fittings)	-	0.00	NIL
6.3.3(Material Identification - Insert Valve Coupler)	-	2000.00	NIL
6.3.4()	-	0.00	NIL
6.3.5(Material Identification - Saddle)	-	1050.00	NIL
6.3.6(Quick Coupled Pump Connectors - Visual)	-	300.00	NIL
Cl.7.1.l(Visual Anneara nce)	-	300.00	NIL
5(Dimensions of pipe - i) Outside diameter)	-	500.00	NIL
5(Dimensions of pipe - ii) Wall thickness minimum)	-	0.00	NIL
6(Visual Appearance)	-	0.00	NIL
7.1(Hydraulic Characteristics - Quality test)	-	0.00	NIL
7.1(Hydraulic Characteristics - Acceptance test)	-	0.00	NIL
7.2(Reversion Test)	-	700.00	NIL
7.3(Tensile Test- i) Tensile Strength)	-	1100.00	NIL
7.3(Tensile Test - ii)Elongation at Break)	-	0.00	NIL
7.4(Fusion Compatibility Test- a) Quality test)	-	0.00	NIL
7.4(Fusion Compatibility Test- b) Acceptance test)	-	0.00	NIL
7.5(Density)	-	900.00	NIL
4.2(Carbon black- a)carbon content)	-	900.00	NIL
Cl.6.2.6(Rubber Ring Hardness)	-	300.00	NIL
4.1.1(density shall be between 940.4 kg/m’ and 958.4 kg/m3 (both inclusive) when determined at 27°C according to procedure prescribed in Annex A of IS 7328. The value of the density shall also not differ from the nominal value by more than 3 kg/m2 as per 5.2.1.1 of IS 7328.)	-	900.00	NIL

31 Dec, 2026

-
-

7570

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY (CIPET) : IPT-BHUBANESWAR

5102634

IS 8391 : Part 3 (2019)

Rubberized coir sheets for cushioning – Specification Part 3 Sandwiched (third revision)

Rubberized coir sheet for cushioning (sandwiched )

15450.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4(Grades)	-	0.00	NIL
Clause 5("MANUFACTURE, WORKMANSHIP AND FINISH")	-	300.00	NIL
Clause 6("SHAPE AND DIMENSIONS")	-	500.00	NIL
Clause 7.1(Density)	-	700.00	NIL
Clause 7.2(Indentation Hardness)	-	1400.00	NIL
Clause 7.3(Resistance to Ageing)	-	2300.00	NIL
Clause 7.4(Resistance to Flexing)	-	4600.00	NIL
Clause 7.5(Compression Set (Aged))	-	1450.00	NIL
Clause 7.6(Compression Set (Un-aged))	-	1200.00	NIL
Clause 7.7(pH Value)	-	350.00	NIL
Clause 7.8(Chloride Content)	-	1000.00	NIL
Clause 7.9(Sulphate Content)	-	1000.00	NIL
"Clause 9.5 Table 2(i)"(Residual pesticides)	-	0.00	NIL
"Clause 9.5 Table 2(ii)"(pH of aqueous extract)	-	350.00	NIL
Clause 11(MARKING OR LABELLING)	-	300.00	NIL

31 Dec, 2026

-
-

7571

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY (CIPET) : IPT-BHUBANESWAR

5102634

IS 10124 : Part 12 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 12 specific requirements for 22½ degree bends (Second Revision)

2350 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(General)	-	0	nil
3.2.2, Table 1(Dimensions of 22 ½ deg Bends)	-	500.00	nil
3.2.2, Table 2(Dimensions of 22 ½ deg Bend for Elastomeric Sealing Ring Joint)	-	500.00	nil
3.2.3(Socket, measurements)	-	0	nil

31 Dec, 2026

-
-

7572

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY (CIPET) : IPT-BHUBANESWAR

5102634

IS 4985 (2021)

UNPLASTICIZED PVC PIPES FOR POTABLE WATER SUPPLIES SPECIFICATION Fourth Revision

Type- A & Type-B

20244.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.1(Colour)	-	300.00	nil
10.1(Surface Finish)	-	0.00	nil
7.2.1.1 Table3(Angle of taper (Note-1))	-	0.00	nil
10.7(Sulphated Ash Content)	-	1200.00	nil
5(CLASSIFICATION OF PIPES)	-	0.00	nil
Cl-7.1(Mean out side Diameter (For less than or equal to 40 mm- Average of 8 , For higher diameters up to 110 mm average of 6))	-	500.00	nil
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Minimum))	-	0.00	nil
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Mamimum))	-	0.00	nil
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Minimum))	-	0.00	nil
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Maximum))	-	0.00	nil
7.1.2.1(DIMENSIONS-PIPE-Thickness(Minimum))	-	0.00	nil
7.1.2.1(DIMENSIONS-PIPE-Thickness(Maximum))	-	0.00	nil
7.1.2.1(DIMENSIONS-PIPE-Average Thickness)	-	0.00	nil
Cl- 7.2(Socket length (Take 4 reading & minimum will be reported))	-	0.00	nil
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Minimum Length)	-	0.00	nil
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Minimum))	-	0.00	nil
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Maximum))	-	0.00	nil
7.2.1.2(a)-Table 5(DIMENSIONS-Sockets for elastomeric sealing ring joints-Minimum depth of engagement)	-	0.00	nil
7.2.1.2-Table 4(DIMENSIONS-Sockets for elastomeric sealing ring joints-Socket inner Diameter)	-	0.00	nil
8(SEALING RINGS)	-	0.00	nil
9.1(PIPE ENDS)	-	0.00	nil
10.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	300.00	nil
10.1.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	0.00	nil
10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity)	-	575.00	nil
10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test)	-	900.00	nil
10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature)	-	1100.00	nil
10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density)	-	500.00	nil
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test))	-	11000.00	nil
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test))	-	850.00	nil
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)-for Integral Sealing Ring Sockets)	-	11000.00	nil
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Integral Sealing Ring Sockets)	-	850.00	nil
11.1.1(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Plumbing pipes)	-	850.00	nil
11.2(Resistance to External Blows at 0°C)	-	1400.00	nil
10.3(Effect on Water Test)	-	3000.00	nil
6.1.2(PVC Resin)	-	4100.00	nil
7.1.3(mean outside diameter, outside diameter at any point, and wall thickness of plumbing pipes)	-	500.00	nil
7.1.4(Length)	-	0.00	nil
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. Variation)	-	0.00	NIL
13.1(Marking)	-	0.00	NIL

31 Dec, 2026

-
-

7573

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY (CIPET) : IPT-BHUBANESWAR

5102634

IS 8391 : Part 1 (2019)

Rubberized coir sheets for cushioning “ Specification Part 1 Curled (third revision)

Rubberized coir sheet for cushioning

14700.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.7.1 (Density, Annex C)	-	500.00	nil
7.7.2(Indentation Hardness, Annex D)	-	1100.00	nil
7.7.3(Resistance to Ageing, Annex E)	-	2300.00	nil
7.7.4(Resistance to Flexing, Annex F)	-	3500.00	nil
7.7.5(Compression Set (Aged), Annex G)	-	1200.00	nil
7.7.6(Compression Set (Un-aged), Annex G)	-	900.00	nil
7.7.7(pH Value, Annex H)	-	350.00	nil
7.7.8(Chloride Content, Annex J)	-	1000.00	nil
7.7.9(Sulphate Content, Annex H-2)	-	1000.00	nil
B-1( DETERMINATION OF LENGTH AND WIDTH, Annex B)	-	250.00	nil
B-2.1(DETERMINATION OF THICKNESS, Annex B )	-	0	nil
B-2.2(Determination of Thickness of the Whole Sample, Annex B)	-	0	nil
6.1(Shape)	-	300.00	nil
6.2(Dimensions)	-	250.00	nil

31 Dec, 2026

-
-

7574

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY (CIPET) : IPT-BHUBANESWAR

5102634

IS 16352 (2020)

Geosynthetics – High density polyethylene (HDPE) geomembranes for lining – Specification (first revision)

High Density Polyethylene ( HDPE ) Geomembranes for Lin

93160.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5,3.1, Table1,x) Type I / II / III / IV / V / VI / VII IS 2530(Carbon black content)	-	925.00	nil
5,3.1, Table 2,xi) Type I / II / III / IV / V / VI IS 2530(Carbon black content)	-	925.00	nil
5,3.1, Table2,iii) Type I / II / III / IV / V / VI Annex K(Lowest individual of 10 thickness value)	-	1800.00	nil
5,3.1, Table1,iii) Type I / II / III / IV / V / VI / VII Method A of IS 13162 (Part 3)(Lowest individual of 10 thickness value)	-	500.00	Length, width & Indivisual Thickness
5,3.1, Table2,iv) Type I / II / III / IV / V / VI Annex L(Average asperity height)	-	500.00	nil
5,3.1, Table 2,v) d) Type I / II / III / IV / V / VI Annex B(Tensile properties: Breaking elongation)	-	2700.00	nil
5,3.1, Table1,xv) Type I / II / III / IV / V / VI / VII Annex J(Stress crack resistance)	-	0	nil
5,3.1, Table 2,xvi) Type I / II / III / IV / V / VI Annex J(Stress crack resistance)	-	13000.00	stress crack resistance 500hrs: 500.00, Conditioning Charge :12500.00
5,3.1, Table1,iv) d) Type I / II / III / IV / V / VI / VII Annex B(Tensile properties: Breaking elongation)	-	0	nil
5,3.1, Table1,xii) Type I / II / III / IV / V / VI / VII ISO 11357 (Part 6) or ASTM D 5885(Oxidative induction time (OIT) : a) Standard OIT or b) High pressure OIT)	-	2200.00	nil
5,3.1, Table 2,xiii) Type I / II / III / IV / V / VI ISO 11357 (Part 6) or ASTM D 5885(Oxidative induction time (OIT) : a) Standard OIT or b) High pressure OIT)	-	2200.00	nil
5,3.1, Table1,xiii) Type I / II / III / IV / V / VI / VII Oven method of IS 7016 (Part 8), ISO 11357-6 and ASTM D 5885(Oven ageing at 85°C, Retention of oxidative induction time (OIT) after 90 days : a) Standard OIT or b) High pressure OIT)	-	54000.00	nil
5,3.1, Table 2,xiv) Type I / II / III / IV / V / VI Oven method of IS 7016 (Part 8), ISO 11357-6 and ASTM D 5885(Oven ageing at 85°C, Retention of oxidative induction time (OIT) after 90 days : a) Standard OIT or b) High pressure OIT)	-	2200.00	nil
3, 3.1(MATERIAL AND MANUFACTURE)	-	0	nil
3, 3.2(MATERIAL AND MANUFACTURE If two or more pieces of geomembranes are used, the material shall be joined together by a suitable heat sealing process keeping an overlap of at least 2.5 cm. )	-	0	nil
4, 4.1(VARIETY AND TYPES : Based on the finish, HDPE geomembrane shall be of following varieties)	-	0	nil
4.2,4.2.1(Based on the thickness of HDPE geomembrane, the material shall be classified as under)	-	0	nil
5,3.1, Table 1(Requirements of Smooth HDPE Geomembrane)	-	0	nil
5,3.1, Table1,i) a) Type I / II / III / IV / V / VI / VII IS 7016 (Part 1)(Length)	-	500.00	nil
5,3.1, Table1,i) b) Type I / II / III / IV / V / VI / VII IS 7016 (Part 1)(width)	-	0	nil
5,3.1, Table1,ii) Type I / II / III / IV / V / VI / VII Method A of IS 13162 (Part 3)(Average thickness at a pressure of 2 ± 0.01 kPa)	-	0	nil
5,3.1, Table 2,v) a) Type I / II / III / IV / V / VI Annex B(Tensile properties: Yield strength,)	-	2700.00	nil
5,3.1, Table1,iv) b) Type I / II / III / IV / V / VI / VII Annex B(Tensile properties: Breaking strength,)	-	0	nil
5,3.1, Table1,iv) c) Type I / II / III / IV / V / VI / VII Annex B(Tensile properties: Yield elongation)	-	1600.00	nil
5,3.1, Table1,v) Type I / II / III / IV / V / VI / VII Annex C(Tear resistance)	-	1600.00	nil
5,3.1, Table1,vi) Type I / II / III / IV / V / VI / VII Annex D(Puncture resistanc)	-	1100.00	nil
5,3.1, Table1,vii) Type I / II / III / IV / V / VI / VII Annex E(Low temperature crack resistance at minus 30°C±1°C)	-	1800.00	nil
5,3.1, Table1,viii) Type I / II / III / IV / V / VI / VII Annex F(Hydrostatic resistance)	-	1600.00	nil
5,3.1, Table1,ix) Type I / II / III / IV / V / VI / VII Annex G(Seam strength : 85 percent of the original actual fabric strength or unbreakable seam)	-	1600.00	nil
5,3.1, Table1,xi) Type I / II / III / IV / V / VI / VII IS 2530(Carbon black dispersion)	-	0	nil
5,3.1, Table1,xiv) Type I / II / III / IV / V / VI / VII Annex H(Retention of breaking strength after UV exposure of 144 h : 85 percent of the original actual fabric strength)	-	90350.00	conditioning charge-89000.00
5,3.1, Table 2(Requirements of Textured (Single or Double Sided) HDPE Geomembrane)	-	0	nil
6(DIMENSIONS AND TOLERANCES The dimensions of HDPE geomembrane when tested by the method given in IS 7016 (Part 1) shall be as agreed to between the buyer and the seller. However, the minimum width of the HDPE geomembrane shall be 5000 mm. A combination of panel width may be used to obtain desired width of geomembrane. Narrow width panels not less than 1000 mm in width may also be used but such pieces shall not exceed 1 piece per roll of finished material of specified width.)	-	500.00	nil
7, 7.1 Annex M(COLOUR, SURFACE CHARACTERISTICS AND FREEDOM FROM DEFECTS: )	-	0	nil
7, 7.2(COLOUR, SURFACE CHARACTERISTICS AND FREEDOM FROM DEFECTS)	-	500.00	nil

31 Dec, 2026

-
-

7575

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY (CIPET) : IPT-BHUBANESWAR

5102634

IS 13489 (2000)

Textiles – Bed mattress – Specification (first revision)

Textile Bed mattress

19200.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1 c)(Thickness)	-	250.00	NIL
5.1 b)(Width)	-	0	NIL
5.1 a)(Length)	-	0	NIL
3(TYPES)	-	0	NIL
4 Table 1(MATERIALS)	-	300.00	NIL
4 Table 1 i)a) IS 175(Case)	-	0	NIL
4 Table 1 i) b)(Case)	-	0	NIL
4 Table 1 ii) a) 1S8391(Cushioning)	-	0	NIL
4 Table 1 ii) b) IS 1741(Cushioning)	-	0	NIL
4 Table 1 ii) c) IS 7933(Cushioning)	-	0	NIL
4 Table 1 iii) a) IS 1920(Piping)	-	0	NIL
4 Table 1 iv) IS 1895(Tying tapes)	-	0	NIL
4 Table 1 v) IS 1720(Sewing thread)	-	0	NIL
5(DIMENSIONS)	-	250.00	NIL
5.1 Fig. l(Type 1 Mattress)	-	0	NIL
5.2(Type 2 Mattress)	-	0	NIL
5.2 a)(Length)	-	0	NIL
5.2 b)(Width)	-	0	NIL
5.2 c)(Thickness)	-	0	NIL
6(MANUFACTURE)	-	300.00	NIL
6.1(MANUFACTURE)	-	300.00	NIL
6.2(MANUFACTURE)	-	0	NIL
6.3(MANUFACTURE)	-	0	NIL
6.4(MANUFACTURE)	-	0	NIL
6.5(MANUFACTURE)	-	0	NIL
8(PACKING)	-	0	NIL
8.2(PACKING)	-	0	NIL

31 Dec, 2026

-
-

7576

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY (CIPET) : IPT-BHUBANESWAR

5102634

IS 14787 (2000)

Unplasticized pvc pipes (Ducts) and fittings for underground telecommunications cable installation - Specification

Unplasticized PVC Pipes (Ducts) and Fittings for Underg

18250.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Composition)	-	0.00	NIL
6(colour)	-	300.00	NIL
7.1(Diameter and wall thickness)	-	500.00	NIL
7.3(Insertion depth)	-	0.00	NIL
7.4(Length of pipe, L)	-	0.00	NIL
8.1(Visual appearance)	-	300.00	NIL
8.2(Pipe Stifness)	-	1100.00	NIL
8.3(Crush Resistance)	-	1100.00	NIL
8.4(Flattening)	-	500.00	NIL
8.5(Heat distortion)	-	1100.00	NIL
8.6(Co-efficient of Friction)	-	1100.00	NIL
8.7(Bending)	-	700.00	NIL
9.1(Impact strength)	-	1100.00	NIL
9.2(Tensile Strength and Elongation)	-	1600.00	NIL
9.3(Reversion)	-	700.00	NIL
9.4(Stress relief)	-	700.00	NIL
9.5(Vicat Softening Temperature)	-	1100.00	NIL
9.6(Density)	-	500.00	NIL
10(Resistance to chemical action)	-	1100.00	NIL
11(Ash content)	-	950.00	NIL
12(Titanium dioxide)	-	1200.00	NIL
13(Fittings)	-	250.00	NIL
14(Hydrostatic test for joint)	-	1250.00	NIL

31 Dec, 2026

-
-

7577

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY (CIPET) : IPT-BHUBANESWAR

5102634

IS 10889 (2004)

High density polyethylene films (First Revision)

13750.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.0(Grades)	-	0	nil
5.1(Materials)	-	0	nil
5.2(Black Compound)	-	0	nil
6.1.1(Appearance)	-	300.00	nil
6.1.2(Film Form)	-	0	nil
6.1.3(Odour )	-	0	nil
6.1.4(Density)	-	500.00	nil
6.1.5(Melt Flow Rate)	-	1100.00	nil
6.1.6(Black Film)	-	1625.00	nil
6.2.1, Table 1(Nominal Thickness)	-	250.00	nil
6.2.1, Table 1(Tolerance, Percent Grade 1 and 2)	-	0	nil
6.2.2, Table 2(Nominal Width)	-	250.00	nil
6.2.2, Table 2(Tolerance, Percent Grade 1 and 2)	-	0	nil
6.3, Table 3(Yield Tolerance)	-	600.00	nil
6.3, Table 3(Tolerance, Percent Grade 1 and 2)	-	0	nil
6.4.1(Tensile Strength at Break)	-	2200.00	nil
6.4.1, Table 4(Direction)	-	0	nil
6.4.1, Table 4(Grade 1 and 2)	-	0	nil
6.4.2(Elongation at Break)	-	0	nil
6.4.2, Table 5(Elongation at Break, Percent Grade 1 and 2)	-	0	nil
6.4.3(Impact Resistance (Falling Dart))	-	850.00	nil
6.4.3, Table 6(Average Thickness of Film)	-	0	nil
6.4.3, Table 6(Impact Failure Load)	-	0	nil

31 Dec, 2026

-
-

7578

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY (CIPET) : IPT-BHUBANESWAR

5102634

IS 10124 : Part 3 (2009)

Fabricated PVC-U Fittings for Potable Water Supplies - Specification Part 3 Specific Requirements for Straight Reducers

1444.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(General)	-	0	nil
3.2, 3.2.1, Fig 1(Manufacture)	-	0	nil
3.2.2, Fig 1(Dimensions)	-	575.00	nil
Table-1 (cl.3.2.2, Fig 1)(Dimensions of Straight Reducers)	-	500.00	nil

31 Dec, 2026

-
-

7579

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY (CIPET) : IPT-BHUBANESWAR

5102634

IS 10124 : Part 4 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 4 specific requirements for caps (Second Revision)

1744.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(General)	-	0	nil
3.2, 3.2.1, Fig 1(Manufacture)	-	0	nil
3.2.2, Fig 1(Dimensions)	-	500.00	nil
Table 1(Cl.3.2.2, and Fig.1)(Dimensions of Caps)	-	500.00	nil

31 Dec, 2026

-
-

7580

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY (CIPET) : IPT-BHUBANESWAR

5102634

IS 10124 : Part 5 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 5 specific requirements for equal tees (Second Revision)

1444.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(General)	-	0	nil
3.2, 3.2.1, Fig 1(Manufacture)	-	0	nil
3.2.2, Fig 1(Dimensions)	-	500.00	nil

31 Dec, 2026

-
-

7581

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY (CIPET) : IPT-BHUBANESWAR

5102634

IS 10124 : Part 6 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 6 specific requirements for flanged tail pieces with metallic flanges (Second Revision)

1819.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(General)	-	0	nil
3.2, 3.2.1, Fig 1(Manufacture)	-	0	nil
3.2.2, Fig 2, table 2(Dimensions)	-	500.00	nil
Table 1 (Clause 3.2.2, and Fig. 1)(Dimensions of PVC Flanged Tail Piece with Metallic Flanges)	-	500.00	nil

31 Dec, 2026

-
-

7582

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY (CIPET) : IPT-BHUBANESWAR

5102634

IS 10124 : Part 7 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 7 specific requirements for threaded adaptors (Second Revision)

1744.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(General)	-	0	nil
3.3, 3.3.1, Fig 1(Manufacture)	-	0	nil
3.3.2, table 1, fig 1(Dimensions)	-	500.00	nil
3.3.3(socket measurement shall comply with IS 10124 (Part 1).)	-	0	nil
Table 1 (Clauses 3.3.1 and 3.3.2)(Dimensions of Threaded Adaptors)	-	500.00	nil

31 Dec, 2026

-
-

7583

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY (CIPET) : IPT-BHUBANESWAR

5102634

IS 10124 : Part 8 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 8 specific requirements for 90 degree bends (Second Revision)

1444.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(General)	-	0	nil
3.2, 3.2.1, Fig 2(Manufacture)	-	0	nil
3.2.2, Fig 2, table 2(Dimensions)	-	500.00	nil
3.2.3(the socket measurement shall comply with IS 10124 (Part 1).)	-	500.00	nil
Table 1 (Clause 3.2.2, and Fig. 1)(Dimensions of 90o Bends)	-	0	nil
Table 2 (Clause 3.2.2, and Fig. 2)(Dimensions of 90o Bend for Elastomeric Sealing Ring Joint)	-	0	nil

31 Dec, 2026

-
-

7584

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY (CIPET) : IPT-BHUBANESWAR

5102634

IS 10124 : Part 9 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 9 specific requirements for 60 degree bends (Second Revision)

1444.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(General)	-	0	nil
3.2, 3.2.1, Fig 2(Manufacture)	-	0	nil
3.2.2, Fig 1, table 1(Dimensions)	-	500.00	nil
3.2.3(the socket measurement shall comply with IS 10124 (Part 1).)	-	500.00	nil
Table 1 (Clauses 3.2.2, 3.2.3, and Fig. 1)(Dimensions of 60o Bends)	-	0	nil
Table 2 (Clause 3.2.2, and Fig. 2)(Dimensions of 60o Bend for Elastomeric Sealing Ring Joint)	-	0	nil

31 Dec, 2026

-
-

7585

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY (CIPET) : IPT-BHUBANESWAR

5102634

IS 10124 : Part 10 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 10 specific requirements for 45 degree bends (Second Revision)

1444.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(General)	-	0	nil
3.2, 3.2.1, Fig 2(Manufacture)	-	0	nil
3.2.2, Fig 1, table 1(Dimensions)	-	500.00	nil
3.2.3(the socket measurement shall comply with IS 10124 (Part 1).)	-	500.00	nil
Table 1 (Clause 3.2.2, and Fig. 1)(Dimensions of 45o Bend)	-	0	nil
Table 2 (Clause 3.2.2, and Fig. 2)(Dimensions of 45° Bend for Elastomeric Sealing Ring Joint)	-	0	nil

31 Dec, 2026

-
-

7586

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY (CIPET) : IPT-BHUBANESWAR

5102634

IS 10124 : Part 11 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 11 specific requirements for 40 degree bends (Second Revision)

1444.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(General)	-	0	nil
3.2.2, Table 1(Dimensions of 30 deg Bends)	-	500.00	nil
3.2.2, Table 2(Dimensions of 30 deg Bend for Elastomeric Sealing Ring Joint)	-	0	nil

31 Dec, 2026

-
-

7587

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY (CIPET) : IPT-BHUBANESWAR

5102634

IS 10124 : Part 13 (2009)

Fabricated PVC-U Fittings for Potable Water Supplies - Specification Part 13 Specific Requirements for 11Â¼oBends PART 12 SPECIFIC REQUIREMENTS FOR 22 Â½o BENDS

1444.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(General)	-	0	nil
3.2.2, Table 2(Dimension of 11 1/4° bends for Elastomeric sealing ring joint)	-	500.00	nil
3.2.2, Table 1(Dimension of 11 1/4° bends)	-	0	nil
3.2.3(Socket, Measurement)	-	0	nil

31 Dec, 2026

-
-

7588

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY (CIPET) : IPT-BHUBANESWAR

5102634

IS 9755 (2021)

Textiles - High Density Polyethylene (HDPE) / Polypropylene (pp) Woven Sacks for Packing Fertilizers

Textiles - High Density Polyethylene (HDPE) / Polypropy

24080.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.6(Bottom Seam-The number of stitches/dm shall be 14 ± 2.)	-	300.00	nil
3.4(Liner-The thickness(A-2 of IS 2508) shall be 40 μm ± 10 percent in case of HMHDPE/ HDPE.)	-	500.00	nil
3.5(Bottom Seam-The two rows of stitches shall be separated from each other by minimum 5 mm)	-	0	nil
3.6(Bottom Seam-the outer stitch shall be minimum 8 mm from the outer edge of the sacks.)	-	0	nil
3.4(Liner-The width of the loose liner shall be minimum 20 mm more than the width of the sack.)	-	250.00	nil
3.4.2(Liner-The bottom seal of the loose liner shall be at least 25 mm from the bottom edge.)	-	250.00	nil
3.6(Bottom Seam-tThe stitching shall be done with double fold over seam to a depth of minimum 25 mm, so that the stitches pass through a minimum of six layers of the fabric.)	-	0	nil
3.3(Sacks)	-	300.00	nil
3.4(Liner)	-	500.00	nil
3.4.2(Lamination)	-	1800.00	nil
3.7(Mouth of the Sack)	-	250.00	nil
3.8(Capacity- The sack shall have the nominal capacity of 50 kg.)	-	250.00	nil
4.3(Mass-(Annexure E))	-	250.00	nil
3.6(Bottom Seam-The number of stitches/dm shall be 14 ± 2.)	-	500.00	nil
4.1 , Table 1(REQUIREMENTS)	-	3800.00	nil
4.2(UV Resistance)	-	10460.00	nil
4.1(Raw Meterial)	-	1999.98	NIL
4.2("Fabric d) Unlaminated Fabric Mass")	-	250.00	NIL
4.2("Fabric b) Linear Density")	-	500.00	NIL
4.3(Sacks)	-	500.00	NIL
4.4.1(Loose Liner)	-	2000.00	NIL
4.4.2(Visual Observation)	-	300.00	NIL
4.4.3(Bottom Seam of Loose Liner)	-	250.00	NIL
4.5(Mass of The Lamination)	-	499.99	NIL
4.5(Laminated Fabric)	-	0.00	NIL
4.5(Lamination Over Hang of the fabric after trimming)	-	0.00	NIL
4.6.1(Distance between the Two Row of Stitches)	-	250.00	NIL
4.6.1(Distance of outer stitch from the edge of the bag)	-	250.00	NIL
4.6.1(Depth of the Stitch( Double fold))	-	250.00	NIL
4.6.1(No.of Stitches/dm)	-	250.00	NIL
4.6.2(Breaking Load of the stitching material Non UV Stabilized sack)	-	1100.00	NIL
4.6.2(Breaking Load for UV Stabilized sack)	-	1100.00	NIL
4.7(Mouth of the Sack)	-	250.00	NIL
"Table 1 of Cl. No.5.1 Sl. No. i"("Dimension a) Inside Length Type 1 & Type 2 ")	-	250.00	NIL
"Table 1 of Cl. No.5.1 Sl. No. i"("Dimension b) Inside Width ")	-	250.00	NIL
"Table 1 of Cl. No.5.1 Sl. No. ii"(Ends/dm ( Type 1 & Type 2))	-	250.00	NIL
"Table 1 of Cl. No.5.3 Sl. No. iv"("Mass of Fabric a) Unlaminated Sack( Type 1 & Type 2)")	-	500.00	NIL
"Table 1 of Cl. No.5.3 Sl. No. iv"("Mass of Fabric b) Laminated Sack( Type 1 & Type 2)")	-	500.00	NIL
"Table 1 of Cl. No.5.3 Sl. No. v"(Mass of Sack( Type 1 & Type 2))	-	500.00	NIL
"Table 1 of Cl. No.5.4 Sl. No. vi"(Avg. Breaking Strength Of fabric (Ravelled strip method)( 325mm X 25 mm))	-	1350.00	NIL
"Table 1 of Cl. No.5.4 Sl. No. vii"(Breaking Strength of Bottom Seam (Ravelled strip method))	-	1350.00	NIL
"Table 1 of Cl. No.5.1 Sl. No. viii"("Elongation at Break of fabric a)Length(Type 1 & Type 2)")	-	0.00	NIL
"Table 1 of Cl. No.5.1 Sl. No. viii"("Elongation at Break of fabric b) Width(Type 1 & Type 2)")	-	0.00	NIL
"Table 1 of Cl. No.5.5 Sl. No. ix"("Ash Content a) For UV Stabilized Sack")	-	949.98	NIL
"Table 1 of Cl. No.5.5 Sl. No. ix"("Ash Content b) For Non- UV Stabilized Sack")	-	950.00	NIL
"Table 1 of Cl. No.5.6 Sl. No. x"(Drop Impact Strength)	-	1100.00	NIL
Cl. No.5.2(Visual Observation)	-	300.00	NIL

31 Dec, 2026

-
-

7589

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY (CIPET) : IPT-BHUBANESWAR

5102634

IS 7903 (2017)

Textiles – Tarpaulins made from high density polyethylene (HDPE) woven fabrics – Specification (fifth revision)

48013.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.4( Line/ Cord beading IS 7903)	-	250.00	nil
4.0(Types IS 7903)	-	500.00	nil
5.1.1(Lamination IS 7903)	-	1050.00	nil
5.1.2(Lamination IS 7903)	-	0	nil
5.2.1(Construction IS 7903)	-	250.00	nil
5.3(Joint/Seam, IS 7903)	-	400.00	nil
5.4(Fixing of Eyelets, IS 7903)	-	0	nil
6.1 Table 1,i)(No of HDPE fabric layers ,IS 7903)	-	250.00	nil
6.1 Table 1,ii)(No of lamination layers, IS 7903)	-	0	nil
6.1 Table 1,iv)(Mass of finished tarpaulin, Annex B ,IS 7903)	-	250.00	nil
6.1 Table 1vi)(Breaking strength before UV exposure,warp ,IS 1969 Part 1)	-	2700.00	nil
6.1 Table 1 vii)(Elongation at break of fabric,warp, IS 1969 Part 1)	-	0	nil
6.1 Table 1 x)(Retention of welded seam strength after UV exposure of 144h(Weft) ,IS 13162 part 2& IS 1969 Part1 )	-	28900.00	nil
6.1 Table 1 ix)(Welded seam strength before UV exposure (Weft) , IS 1969 Part 1)	-	1100.00	nil
6.1 Table 1 xi)(Trapezoidal tear strength, IS 14293)	-	1100.00	nil
6.1 Table 1 xii)(Puncture Resistance, Annex D of IS 7903)	-	1100.00	nil
6.1 Table 1 xiii)(Impact Failure load , at 1524 mmdrop, Annex E of IS 7903)	-	1100.00	nil
6.1 Table 1 xiv)(Color fastness to light (For color Tarpulines) , IS 2454)	-	850.00	nil
6.1 Table 1 xv)(Ash Content, Annex F of IS 7903)	-	950.00	nil
6.2(Length, IS 7903)	-	250.00	nil
6.2(Width, IS 7903)	-	250.00	nil
6.2(height, IS 7903)	-	250.00	nil
6.3(Water Proofness,IS 7941)	-	1000.00	nil
6.3(Water Proofness, IS 7940)	-	5200.00	nil
3.3(Eyelets (Dimesnions) i) Starting thickness of metal Aluminium min ii) Outside dia of flange‘A’ iii) Flange formed height ‘B’ iv) Pierced dia ‘C’ v) Overall length ‘D’ vi) Internal dia of Barrel when closed ‘E’ min vii) Thickness of compressed material between eyelet and washer F’ max viii) Outside diameter of barrel under the flange‘G’ )	-	250.00	nil
3.2(HDPE Fabric (Material Identification))	-	1050.00	nil
3.1(HDPE Tapes (Carbon Black Content))	-	925.00	nil
3.1(HDPE Tapes (Material Identification))	-	1050.00	nil
5.1.1(Coating Thickness)	-	250.00	nil
5.1.1(Carbon Black Content)	-	925.00	nil
5.1.1(Sandwich lamination thickness)	-	250.00	nil
5.1.1(Mass of Finished Tarpaulin)	-	500.00	nil
5.1.1(UV Exposure (144 hrs))	-	26700.00	nil
5.1.1(Agening)	-	4200.00	nil

31 Dec, 2026

-
-

7590

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY (CIPET) : IPT-BHUBANESWAR

5102634

IS 11652 (2017)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg cement – Specification (third revision)

27630.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	500.00	nil
Fig. 1- Table 1- Sr. no. ii (Ends per dm - Annex B 40 ± 2 )	-	500.00	nil
Fig. 1- Table 1-Sr. no. iii (Picks per dm-Annex B 40 ± 2 )	-	500.00	nil
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm )	-	500.00	nil
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm )	-	500.00	nil
Fig. 1- Table 1-Sr. no. i (Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm )	-	0	nil
Fig. 1, Table 1 (i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm )	-	0	nil
4.5(and the remaining overhang shall not be more than 5 mm after trimming.)	-	0	nil
4.1(Raw Material )	-	1050.00	nil
4.2 (Fabric)	-	0	nil
4.2 (Linear Density, 900 denier)	-	500.00	nil
4.2 (The woven fabric shall be of weight, 79 g/m2 )	-	500.00	nil
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: a) ± 10 percent on individual value, and )	-	0	nil
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: b) ± 5 percent on average. )	-	0	nil
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	nil
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	nil
4.3(Sacks)	-	500.00	nil
4.4(Seam )	-	2550.00	Visual :500.00, Dimension: 500.00, Material Identification :1050.00, Denier of stitching material :500.00
4.4(Seam The two rows of stitches shall be separated from each other by minimum 5 mm and )	-	0	nil
4.4(Seam The outer stitch shall be minimum 8 mm from the outer edge of the sacks. )	-	0	nil
4.4(Seam The stitching shall be done with double fold over seam to)	-	0	nil
4.4(to a depth of minimum 25 mm, so that so that)	-	0	nil
4.4(that the stitches pass through a minimum of six layers of the fabric.)	-	0	nil
4.4(The number of stitches/dm shall be 14 ± 2.)	-	0	nil
4.4(Seam)	-	0	nil
4.5(Lamination )	-	1550.00	Visual :500.00, Material Identification: 1050.00
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	500.00	nil
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) Non-gusseted type 70 + 6%)	-	0	nil
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	1100.00	nil
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	1100.00	nil
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	1100.00	nil
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25)	-	0	nil
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25)	-	0	nil
5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure)	-	1100.00	nil
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	1200.00	nil
5/5.6 (UV Resistance, )	-	10180.00	nil
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to a) UV Radiation -Annex F )	-	1100.00	nil
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to b) Accelerated Weathering - Annex F )	-	1100.00	nil

31 Dec, 2026

-
-

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number