BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15617 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

8071

CIPET, Lucknow

9102534

IS 12786 (1989)

Irrigation equipment - Polyethylene pipes for irrigation laterals - Specification

8369 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.c & 4.2.a (Carbon Black content - IS 2530 : 1963)	-	925	NIL
4.2.b (The dispersion of Carbon Black content shall be satisfactory - IS 2530 : 1963)	-	700	NIL
5 and Table 1(DIMENSIONS OF PIPES - wall thickness shall)	-	500	NIL
6.1(Visual Appearance)	-	500	NIL
7.1 Table-2 (b)Acceptance Test for 01 hour at 20°C & 6.9MPa induced stress)	-	1000	NIL
7.1 Table-2 (Hydraulic Characteristics a)Quality Test for 100 hours at 70°C & 2.5.MPa induced stress. )	-	3000	NIL
7.2(Reversion Test)	-	1200	test charges 700 + specimen charges 500
7.3(Tensile Test)	-	1800	test charges 1300 + specimen charges 500
7.4(SusceptibiIity to Environmental Stress Cracking)	-	1200	NIL

31 Dec, 2026

-
-

8072

CIPET, Lucknow

9102534

IS 16208 (2015)

Textiles - High density polyethylene (HDPE)/polypropylene (PP) woven sacks for packaging 10 kg, 15 kg, 20 kg, 25 kg and 30 kg foodgrains - Specification

21430 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Raw Material)	-	1050	Identification
4.2(Tapes – Width IS 6192 and IS 11197)	-	500	Fabric
4.3(Sacks)	-	500	Visual Appearance
4.4 and Table 1 i(Capacity)	-	500	NIL
5.2 and Table 1 ii a(Dimensions Inside Length)	-	500	NIL
5.2 and Table 1 iii(Ends per dm )	-	500	NIL
5.2 and Table 1 iv(Picks per dm )	-	500	NIL
5.1 and Table 1 v(Mass of sack )	-	500	NIL
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise )	-	2200	warp-1100 Weft-1100
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise )	-	0	NIL
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise)	-	0	NIL
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise )	-	0	NIL
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	10180	U.V exposure 192 Hrs.
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise )	-	2200	Breaking Strength - Lengthwise & Breadthwise
5.2 and Table 1 x(Ash content )	-	1200	NIL

31 Dec, 2026

-
-

8073

CIPET, Lucknow

9102534

IS 15907 (2010)

Agro textiles – High density polyethylene (HDPE) woven beds for vermiculture – Specification

86405 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.3(Cord Beading - IS 15907)	-	500	Diameter of Cord Beading
5.2.1(Lamination- IS 15907)	-	500	Lamination
5.3.1(Construction- IS 15907)	-	500	NIL
6.1(Width - IS 15907)	-	500	NIL
5.3.2(Construction- IS 15907)	-	500	NIL
5.4(Bonding- IS 15907)	-	500	NIL
6- Table 1- SL.No (i)(Mass)	-	500	NIL
6- Table 1- SL.No (ii)(Breaking strength before UV exposure,warp - IS 1969 )	-	3100	a) Warp direction Rs 1300 b) Weft direction Rs 1300 Specimen 500
6- Table 1- SL.No (vii)(Tear strength, Warp - Method A2 of IS 7016 (Part 3))	-	2700	a) Warp direction Rs 1100 b) Weft direction Rs 1100 Specimen 500
6- Table 1- SL.No (vii)(Tear strength, Weft - Method A2 of IS 7016 (Part 3))	-	0	NIL
6- Table 1- SL.No (iv)(Retention of breaking strength after UV exposure, - Annex B of IS 15907 and IS 1969)	-	3100	a) Warp direction Rs 1300 b) Weft direction Rs 1300 Specimen 500
6- Table 1- SL.No (v)(Welded seam strength before UV exposure- IS 1969)	-	1100	NIL
6- Table 1- SL.No (vi)(Welded seam strength after UV exposure- Annex B of IS 15907 and IS 1969)	-	1100	NIL
6- Table 1- SL.No (viii)(Puncture strength - Annex C of IS 15907)	-	1100	NIL
6- Table 1- SL.No (ix)(Environmental stress cracking test - Annex D of IS 15907)	-	2000	test charges 1500 + specimen charges 500
6- Table 1- SL.No (x)(Resistance to chemicals, change in the mass - Annex E of IS 15907)	-	2500	test charges 2000 + specimen charges 500
6- Table 1- SL.No (xi)(Colour fastness to artificial light -IS 2454)	-	2000	test charges 1500 + specimen charges 500
6- Table 1- SL.No (xii)(Bursting pressure-IS 1966)	-	1350	NIL
6.1(Length -IS 15907)	-	500	NIL
6.1(Height - IS 15907)	-	500	NIL
6.2(Water Proofness,IS 7941)	-	6700	a) Before Ageing b) After Ageing c) Ageing 70 C/168 hrs.
5.2.2(coating thickness of the sandwich lamination- method A of IS 13162 (Part 3))	-	500	NIL

31 Dec, 2026

-
-

8074

CIPET, Lucknow

9102534

IS 12232 : Part 1 (1996)

Irrigation equipment - Rotating sprinkler: Part 1 design and operational requirements (First Revision)

17700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Materials)	-	1550	Material identification with visual examination (1050+500)
4.2.1(Construction and workmanship)	-	500	NIL
4.2.2(Construction and workmanship)	-	300	NIL
4.2.3(Construction and workmanship)	-	500	NIL
4.3(Threaded connections ISO 7-1.)	-	500	NIL
4.4.1(Effective pressures)	-	500	NIL
4.4.2(Actuating mechanism)	-	500	NIL
6.1(Test of construction and parts)	-	500	NIL
6.2.1(Threaded connections to riser)	-	500	NIL
6.2.2(Nozzle threads intended for threaded connection)	-	500	NIL
6.3(Test of resistance to hydrostatic pressure at ambient temperature)	-	850	NIL
6.4(Test of resistance to hydrostatic pressure at high temperature)	-	1600	NIL
6.5.1 a(Watertightness of sprinkler - flowrate < 250 Iih)	-	500	NIL
6.5.1 b(Watertightness of sprinkler - flowrate ≥ 250 I/h,)	-	500	NIL
6.5.2(Watertightness of nozzle connection)	-	500	NIL
7.1(Test of uniformity of rotation speed)	-	500	NIL
7.2(Test of uniformity of ftowrate )	-	500	NIL
7.3(Test of distribution characteristics)	-	1500	NIL
7.4(Test of effective diameter of coverage)	-	500	NIL
7.5(Test of trajectory height (for sprinklers with low trajectory angle))	-	500	NIL
7.6(Test of range of effective pressure)	-	500	NIL
8.1 and 6.1(Durability tests)	-	6250	NIL
8.2 and 6.3(Durability tests)	-	850	NIL
8.3 and 6.5.1(Durability tests)	-	500	NIL

31 Dec, 2026

-
-

8075

CIPET, Lucknow

9102534

IS 10124 : Part 1 (2009)

Fabricated PVC-U Fittings for Potable Water Supplies - Specification Part 1 General Requirements (Second Revision)

4288 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1 Table-1 Fig.1(Dimension of Socket length)	-	500	NIL
6.1(Opacity test in accordance with IS 12235 (Part 3))	-	700	NIL
6.2(Short Term Hydraulic Test in accordance with Annex A)	-	850	NIL
6.3(Effect on water test)	-	3000	nil

31 Dec, 2026

-
-

8076

CIPET, Lucknow

9102534

IS 13488 (2008)

Irrigation equipment - Emitting pipe systems - Specification (First Revision)

9544 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.2 (Ref. Cl 4.1.c & 4.2.a of IS 12786 : 1989)(Carbon Black content - IS 2530 : 1963)	-	925	NIL
5.1.2 (Ref. Cl 4.2.b of IS 12786 : 1989)(The dispersion of Carbon Black content shall be satisfactory - IS 2530 : 1963)	-	700	NIL
6.3(General)	-	500	NIL
5.1.2 (Ref. Cl 4.1.c.i of IS 12786 : 1989)(Density)	-	700	NIL
5.1.2 (Ref. Cl 4.1.c.ii of IS 12786 : 1989)(Toluene extract - Annex A of IS 12786:1989)	-	1000	NIL
5.1.2 (Ref. Cl 4.1.c.iii of IS 12786 : 1989)(Volatile matter - Annex B of IS 12786:1989)	-	700	NIL
8.3.1(Wall Thickness ofEmitting Pipe)	-	500	NIL
8.1.2(Uniformity of Emission Rate for Unregulated Emitting Pipes)	-	1000	NIL
8.2(Emission Rate of Emitting Unit as a Function of Inlet Pressure)	-	1000	NIL
8.3.3(Flow Paths in Emitting Unit)	-	500	NIL
8.3.4(Spacing ofEmitter Units)	-	0	NIL
8.4.1(Resistance to Hydrostatic Pressure at Ambient Temperature)	-	1100	NIL
8.4.2(Resistance to Hydrostatic Pressure at Elevated Temperature)	-	1600	NIL
8.5(Resistance to Tension at Elevated Temperature)	-	1100	NIL
8.6(Resistance to Pull Out of Joints Between Fitting and Emitting IS 13479)	-	500	NIL
8.7.1(Resistance of PE Emitting Pipe to Environmental Stress Cracking -Acceptance Test Annex D of IS 12786)	-	1200	NIL
8.7.2(Resistance of PE Emitting Pipe to Environmental Stress Cracking - Type Test Annex D of IS 12786)	-	1600	NIL
8.8(Determination of Emitting Unit Exponent)	-	600	NIL

31 Dec, 2026

-
-

8077

CIPET, Lucknow

9102534

IS 7834 : Part 1 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 1 General requirements

16-315mm

4313 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4(Minimum Thickness)	-	500	NIL
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Minimum Socket Length)	-	0	NIL
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Mean Socket Internal Diameter at Mid-Point of Socket Length)	-	0	NIL
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Out-of-roundness tolerances of socket inside diameter)	-	0	NIL
Cl. 6.1(Stress Relief Test- Appendix A)	-	700	NIL
Cl. 6.2(Opacity- Appendix B)	-	700	NIL
Cl. 6.3(Effect on Water[(Lead ( first extraction )]- Appendix C)	-	3000	NIL
Cl. 6.4(Short-Term Hydraulic Test- Appendix D)	-	850	NIL
Cl. 6.3(Effect on Water[(Lead ( third extraction )]- Appendix C)	-	0	NIL
Cl. 6.3(Effect on Water [Dialkyl tin C4, and higher homologues, measured as tin ( third extraction )]- Appendix C)	-	0	NIL
Cl. 6.3(Effect on Water [Other toxic substances ( third extraction )]- Appendix C)	-	0	NIL

31 Dec, 2026

-
-

8078

CIPET, Lucknow

9102534

IS 3419 (1988)

Specification for fittings for rigid non - Metallic (Second Revision)

16-50mm

7650 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8 & 5(Visual Examination -IS:3419)	-	500	NIL
10(Resistance to Heat -IS:3419)	-	700	NIL
11(Resistance to Burning - IS 3419)	-	700	NIL
12(Moisture Absorption - IS 3419)	-	700	NIL
13.2 &13.3(Resistance to chemival action in Acid solution - IS 3419)	-	1100	NIL
14.1(Copper Test - IS 3419)	-	700	NIL
15, 15.3(Resistance to Oil - IS 3419)	-	1700	Test charges 500 + specimen/condition charges 1200
16- Appendix-A(Resistance to Impact -IS 3419)	-	1000	NIL
17.2(Electric Strength - IS 3419)	-	1100	NIL
17.3(Insulation Resistance - IS 3419)	-	1100	NIL
13.2 &13.3(Resistance to chemival action in Alkaline solution - IS 3419)	-	1100	NIL

31 Dec, 2026

-
-

8079

CIPET, Lucknow

9102534

IS 2925 (1984)

Specification for industrial safety helmets (Second Revision)

All

11025 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Sizes)	-	500	Dimension
6.1(Workmanship & Finish)	-	500	NIL
7.1(Mass)	-	500	Mass of Helmet
8.1(Shock Absorption Resistance)	-	5000	NIL
8.2(Penetration Resistance)	-	1000	NIL
8.3(Flamability Resistance)	-	750	NIL
8.4(Electrical Resistance)	-	1100	NIL
8.5(Water Absorption)	-	600	NIL
8.6(Heat Resistance)	-	700	NIL
3.1(Shell)	-	1000	NIL
3.2(Harness)	-	500	NIL
3.3(Metal Parts)	-	1000	NIL

31 Dec, 2026

-
-

8080

CIPET, Lucknow

9102534

IS 16098 Part 1 (2013)

Structured-Wall Plastics Piping Systems for Non-Pressure Drainage and Sewerage Part 1 Pipes and Fittings With Smooth External Surface, Type A

75-250mm

52963.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Wall Construction Designated as Type A)	-	500	NIL
6.3.1(Dimension of Pipes and Fittings Diameter of pipe)	-	500	NIL
7.0(Physical characteristics for pipes and fittings Appearance)	-	300	NIL
7.3(Vicat softening temperature of pipes)	-	1100	NIL
7.4(Resistance to Dichloromethane)	-	1000	NIL
7.5(longitudinal reversion)	-	1200	test charges 700 +specimen charges 500
7.1(Appearance)	-	500	NIL
7.2(Colour )	-	0	NIL
8.2(Vicat softening temperature of fittings)	-	1100	NIL
8.3(Effect of Heating (Stress Relief Test))	-	1200	test charges 700 +specimen charges 500
9.1(Ring stiffness)	-	1400	NIL
9.2(Resistance to external blows at o C)	-	1600	test charges 1100 +specimen charges 500
8.1.2 (a)(Mechanical Characteristics of Pipes Ring Flexibility)	-	1100	NIL
9.4(Creep ratio)	-	26600	test charges1100 +specimen charges 25500
10.1(Impact Strength of Injection Moulded and Fabricated Fittings)	-	1100	NIL
12.1(Elastomeric Sealing Ring Joints)	-	1150	NIL
12.1.2(Tightness of Elastomeric Sealing Ring Joints (Internal Vaccum ))	-	1000	NIL
9 (Table 12)(Performance Requirements)	-	11850	NIL
12.1.3(Resistance to Combined Temperature Cycling and External Loading)	-	2000	NIL
7.6(7.6 Effect on Water)	-	3000	NIL

31 Dec, 2026

-
Exclusion : Cl 5.1 (Composition of the material)

8081

CIPET, Lucknow

9102534

IS 15351 (2015)

Agro textiles – Laminated high density polyethylene (HDPE) woven geomembrane for water proof lining – Specification (second revision)

All

194088 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(HDPE Tapes)	-	500	NIL
3.2(HDPE Fabric)	-	500	NIL
5.1(Lamination)	-	500	NIL
5.1.1 and 6.2(Carbon black content, Percent- IS 2530)	-	925	NIL
5.2(Panel Width)	-	500	NIL
5.3(Joints/Seams)	-	500	NIL
5.1.1 and 6.2(Thickness, mm- IS 7016: Part 1)	-	500	NIL
5.1.1 and 6.2(Mass, g/sq m)	-	500	NIL
5.1.1 and 6.2(Length)	-	500	NIL
5.1.1 and 6.2(Width)	-	0	NIL
5.1.1 and 6.2(Breaking Load on 20 cm X 10 cm Strip, Min )	-	1100	NIL
5.1.1 and 6.2(Before UV exposure IS 13162 (Part 5)	-	1100	NIL
5.1.1 and 6.2(Strain at Maximum load, Percent-IS 13162 (Part 5)	-	1100	NIL
Table-1(Breaking load on 20 × 10 cm strip, N, Min after)	-	0	NIL
5.1.1 and 6.2( U.V exposure of 1000 h for warp and weft)	-	176500	NIL
5.1.1 and 6.2(Impact failure load, at 1524 mm drop,)	-	1100	NIL
5.1.1 and 6.2(Tear resistance, N, Min-Method A1 of IS 7016 (Part 3))	-	1100	NIL
5.1.1 and 6.2(Puncture resistance, N, Min-Annex D)	-	1100	NIL
5.1.1 and 6.2(Bursting strength (Ball burst),N/cm², Min-)	-	1000	NIL
5.1.1 and 6.2(Seam strength before UV exposure (N/mm), Min-IS 15060)	-	1100	NIL
Table-1(Seam strength after UV exposure N/mm, Min-Annex B and IS 15060)	-	1100	NIL
5.1.1 and 6.2(Hydrostatic resistance-Annex E)	-	1000	NIL
Table-1(Hydrostatic resistance after UV exposure of 1000 h -Annex B and Annex E)	-	1000	NIL
5.1.1 and 6.2(Ash content, percent, Max-Annex F)	-	1200	NIL

31 Dec, 2026

-
-

8082

CIPET, Lucknow

9102534

IS 9755 (2021)

Textiles - High Density Polyethylene (HDPE) / Polypropylene (pp) Woven Sacks for Packing Fertilizers

32893 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.6(Bottom Seam-The number of stitches/dm shall be 14 ± 2.)	-	500	NIL
3.4(Liner-The thickness(A-2 of IS 2508) shall be 40 μm ± 10 percent in case of HMHDPE/ HDPE.)	-	500	NIL
3.5(Bottom Seam-The two rows of stitches shall be separated from each other by minimum 5 mm)	-	500	NIL
3.6(Bottom Seam-the outer stitch shall be minimum 8 mm from the outer edge of the sacks.)	-	500	NIL
3.4(Liner-The width of the loose liner shall be minimum 20 mm more than the width of the sack.)	-	500	NIL
3.7(Mouth of the Sack)	-	500	NIL
3.8(Capacity- The sack shall have the nominal capacity of 50 kg.)	-	500	NIL
4.1 , Table 1(REQUIREMENTS)	-	3700	Raw Material Identification 2000 Migration 1700
4.2(UV Resistance)	-	10180	NIL
4.2(UV Resistance-The HDPE/PP woven fabric of sack made out of UV stabilized material shall have at least 50 percent of the original breaking strength when tested after the same has been exposed to UV radiation and weathering as per the method given in Annex D.)	-	4900	Breaking Strength (LW) before & After UV 2200 Breaking Strength (WW) before & After UV 2200 Specimen 500
4.3(Mass-(Annexure E))	-	500	NIL
5.6(Drop Impact Test)	-	1100	NIL
4.1(Raw Meterial)	-	2000	NIL
4.2("Fabric a) Width of Tape")	-	500	NIL
4.2("Fabric b) Linear Density")	-	700	NIL
4.2("Fabric c) Mesh")	-	500	NIL
4.2("Fabric c) Mesh")	-	500	NIL
4.2("Fabric d) Unlaminated Fabric Mass")	-	500	NIL
4.3(Sacks)	-	500	NIL
4.4.1(Loose Liner)	-	500	NIL
4.4.1(Thickness of Linear)	-	500	NIL
4.4.2(Visual Observation)	-	500	NIL
4.4.3(Bottom Seam of Loose Liner)	-	500	NIL
4.5(Mass of The Lamination)	-	500	NIL
4.5(Laminated Fabric)	-	500	NIL
4.5(Lamination Over Hang of the fabric after trimming)	-	500	NIL
4.6.1(Distance between the Two Row of Stitches)	-	500	NIL
4.6.1(Distance of outer stitch from the edge of the bag)	-	500	NIL
4.6.1(Depth of the Stitch( Double fold))	-	500	NIL
4.6.1(No.of Stitches/dm)	-	500	NIL
4.6.2(Breaking Load of the stitching material Non UV Stabilized sack)	-	1100	NIL
4.6.2(Breaking Load for UV Stabilized sack)	-	1100	NIL
4.7(Mouth of the Sack)	-	500	NIL
"Table 1 of Cl. No.5.1 Sl. No. i"("Dimension a) Inside Length Type 1 & Type 2 ")	-	500	NIL
"Table 1 of Cl. No.5.1 Sl. No. i"("Dimension b) Inside Width ")	-	500	NIL
"Table 1 of Cl. No.5.1 Sl. No. ii"(Ends/dm ( Type 1 & Type 2))	-	500	NIL
"Table 1 of Cl. No.5.1 Sl. No. iii"(Picks /dm ( Type 1 & Type 2))	-	500	NIL
"Table 1 of Cl. No.5.3 Sl. No. iv"("Mass of Fabric a) Unlaminated Sack( Type 1 & Type 2)")	-	500	NIL
"Table 1 of Cl. No.5.3 Sl. No. iv"("Mass of Fabric b) Laminated Sack( Type 1 & Type 2)")	-	500	NIL
"Table 1 of Cl. No.5.3 Sl. No. v"(Mass of Sack( Type 1 & Type 2))	-	500	NIL
"Table 1 of Cl. No.5.4 Sl. No. vi"(Avg. Breaking Strength Of fabric (Ravelled strip method)( 325mm X 25 mm))	-	1100	NIL
"Table 1 of Cl. No.5.4 Sl. No. vii"(Breaking Strength of Bottom Seam (Ravelled strip method))	-	1100	NIL
"Table 1 of Cl. No.5.1 Sl. No. viii"("Elongation at Break of fabric a)Length(Type 1 & Type 2)")	-	0	NIL
"Table 1 of Cl. No.5.1 Sl. No. viii"("Elongation at Break of fabric b) Width(Type 1 & Type 2)")	-	0	NIL
"Table 1 of Cl. No.5.5 Sl. No. ix"("Ash Content a) For UV Stabilized Sack")	-	1200	NIL
"Table 1 of Cl. No.5.5 Sl. No. ix"("Ash Content b) For Non- UV Stabilized Sack")	-	1200	NIL
"Table 1 of Cl. No.5.6 Sl. No. x"(Drop Impact Strength)	-	1100	NIL
Cl. No.5.2(Visual Observation)	-	500	NIL
Cl. No.5.3(Mass of Bale)	-	500	NIL
Cl. No.5.4(Breaking Strength of Fabric)	-	1100	NIL
Cl. No.5.5("Ash Content a) For UV Stabilized Sack")	-	1200	NIL
Cl. No.5.5("Ash Content a) For UV Stabilized Sack")	-	1200	NIL
Cl. No.5.5("Ash Content b) For Non- UV Stabilized Sack")	-	1200	NIL
Cl. No.5.6(Drop Impact testing of filled sack)	-	1100	NIL
Cl. No.5.7(UV Resistance)	-	10180	NIL
Cl. No.6.1(Printing on Sacks)	-	500	NIL
Cl. No.6.2.(Packaging)	-	500	NIL
Cl. No.6.3.(Marking on the Bale)	-	500	NIL
Cl. No.6.4.(BIS Certification Marking)	-	0	NIL
Cl. No.6.5.(Storage)	-	0	NIL

31 Dec, 2026

-
-

8083

CIPET, Lucknow

9102534

IS 14611 (2016)

Multilayered cross laminated sheets/tarpaulins/covers/agricultural films - Specification (First Revision)

All

36111 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 6.1(Workmanship)	-	500	NIL
Cl. 6.2(Substance)	-	500	NIL
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (a)(Tensile strenght, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- LN light)	-	2600	NIL
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (b)(Tensile strenght, After ageing at 70±1°C 168h. Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speeed 500mm/min, Grade-XHN Extra heavy)	-	6800	1300 (MD)+1300(TD)+4200(ageing)
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (a)(Tear strenght, Annex-F, Grade- XLN Extra light)	-	2600	1300 (MD)+1300(TD)
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (a)(Tear strenght, After ageing at 70±1°C for 168h, Annex-F, Grade- XHN Extra heavy)	-	2600	1300 (MD)+1300(TD)
Cl. 6.4(water proofness test)	-	1000	NIL
Cl. 6.5(Strenght of joints/seams)	-	1100	NIL
Cl 6.6(Flex Test)	-	7200	1500 (before ageing)+1500(after ageing)+4200(ageing)
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (a)(Tensile strenght, After ageing at 70±1°C 168h. Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speeed 500mm/min, Grade-XHN Extra heavy)	-	2600	NIL
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (a)(Tear strenght, After ageing at 70±1°C for 168h, Annex-F, Grade- XLN Extra light)	-	2600	NIL
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (a)(Tear strenght, Annex-F, Grade- LN light)	-	2600	NIL
Table1 - vi)(Average Tensile Strength & Elongation at Break after Exposing to UV Radiation & Weathering)	-	12780	1300 (MD)+1300(TD)+10180(UV)
Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (a)(Tensile strenght, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- LN light)	-	2600	NIL
Cl. 6.2,6.3,6.8, table no. 1 Sl No. i(Mass per unit area, Grade-XLN Extra light, Ref. IS 7016(Part 1))	-	500	NIL

31 Dec, 2026

-
-

8084

CIPET, Lucknow

9102534

IS 7903 (2017)

Textiles – Tarpaulins made from high density polyethylene (HDPE) woven fabrics – Specification (fifth revision)

All

72019 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(HDPE Tapes (Material Identification))	-	1050	NIL
3.1(HDPE Tapes (Carbon Black Content))	-	925	NIL
3.1(HDPE Tapes (Presence of UV-stabiliser))	-	2500	NIL
3.2(HDPE Fabric (Material Identification))	-	1050	NIL
3.3(Eyelets (Dimesnions) i) Starting thickness of metal Aluminium min ii) Outside dia of flange‘A’ iii) Flange formed height ‘B’ iv) Pierced dia ‘C’ v) Overall length ‘D’ vi) Internal dia of Barrel when closed ‘E’ min vii) Thickness of compressed material between eyelet and washer F’ max viii) Outside diameter of barrel under the flange‘G’ )	-	500	NIL
3.4( Line/ Cord beading IS 7903)	-	500	NIL
5.1.1(Lamination IS 7903)	-	1050	NIL
5.3(Joint/Seam, IS 7903)	-	500	NIL
5.4(Fixing of Eyelets, IS 7903)	-	500	NIL
6.1 Table 1,i)(No of HDPE fabric layers ,IS 7903)	-	500	No. of HDPE fabric No. of lamination layers Total no. of layers
6.1 Table 1,ii)(No of lamination layers, IS 7903)	-	500	NIL
6.1 Table 1, iii)(Total no of layers in the finished tarpaulin, IS 7903)	-	500	NIL
6.1 Table 1,iv)(Mass of finished tarpaulin, Annex B ,IS 7903)	-	500	NIL
6.1 Table 1,v)(Mass of laminated fabric, Annex C , IS 7903)	-	500	NIL
6.1 Table 1vi)(Breaking strength before UV exposure,warp ,IS 1969 Part 1)	-	3100	1300 (warp)+1300(weft)+500(specimen)
6.1 Table 1vi)(Breaking strength before UV exposure,weft, IS 1969 part 1)	-	0	test charges added in above
6.1 Table 1 vii)(Elongation at break of fabric,warp, IS 1969 Part 1)	-	0	test charges added in above
6.1 Table 1 vii)(Elongation at break of fabric,weft, IS 1969 Part1)	-	0	test charges added in above
6.1 Table 1 viii)(Retention of breaking strength after UV exposure of 144h Warp, IS 13162 part 2& IS 1969 Part1 )	-	3100	1300 (warp)+1300(weft)+500(specimen)
6.1 Table 1 viii)(Retention of breaking strength after UV exposure of 144h Weft , IS 13162 part 2& IS 1969 Part1 )	-	0	test charges added in above
6.1 Table 1 ix)(Welded seam strength before UV exposure (Weft) , IS 1969 Part 1)	-	1100	NIL
6.1 Table 1 x)(Retention of welded seam strength after UV exposure of 144h(Weft) ,IS 13162 part 2& IS 1969 Part1 )	-	1100	NIL
6.1 Table 1 xi)(Trapezoidal tear strength, IS 14293)	-	1100	NIL
6.1 Table 1 xii)(Puncture Resistance, Annex D of IS 7903)	-	1100	NIL
6.1 Table 1 xiii)(Impact Failure load , at 1524 mmdrop, Annex E of IS 7903)	-	1100	NIL
6.1 Table 1 xiv)(Color fastness to light (For color Tarpulines) , IS 2454)	-	850	NIL
6.1 Table 1 xv)(Ash Content, Annex F of IS 7903)	-	950	NIL
6.2(dimension(l))	-	250	a) Length b) Width c) Height
6.2(dimension(w))	-	0	NIL
6.2(dimension(h))	-	0	NIL
6.3(Water Proofness,IS 7941)	-	1000	Before Ageing
6.3(Water Proofness, IS 7940)	-	5200	1000 test charges + 4200 ageing charges

31 Dec, 2026

-
-

8085

CIPET, Lucknow

9102534

IS 11652 (2017)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg cement – Specification (third revision)

23305 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	500	NIL
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	1200	NIL
5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure)	-	1100	NIL
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	1100	NIL
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	1100	NIL
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	1100	NIL
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	1100	NIL
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	500	NIL
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm )	-	500	NIL
Fig. 1- Table 1- Sr. no. ii (Ends per dm - Annex B 40 ± 2 )	-	500	NIL
Fig. 1- Table 1-Sr. no. iii (Picks per dm-Annex B 40 ± 2 )	-	500	NIL
4.3(Sacks)	-	500	NIL
4.7(Valve for Filling of Sacks)	-	500	NIL
4.4(Seam The stitching shall be done with double fold over seam to)	-	500	NIL
4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used in the fabric.)	-	500	NIL
4.2 (Fabric)	-	250	NIL
4.1(Raw Material )	-	1050	NIL
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	1200	NIL
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	1200	NIL

31 Dec, 2026

-
-

8086

CIPET, Lucknow

9102534

IS 2508 (2016)

Polyethylene films and sheets - Specification (Third Revision)

Type I and II (Natural film)

16731 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.1(Appearance)	-	500	NIL
5.1.5(Melt Flow Index. Cl 6, 7 of IS 13360(Part-4/Section-1))	-	1100	NIL
5.1.4(Density, Cl.5 of IS 13360(Part-3/Section-1))	-	700	NIL
5.2.2(Tolerance on Thickness, Annex-A)	-	500	NIL
6.1, Table 1(Tensile strength at break. A) Machine Direction. IS 13360 (Part 5/Sec 1))	-	1300	NIL
6.1, Table 1(Tensile strength at break. B) Transverse Direction. IS 13360 (Part 5/Sec 3))	-	1800	Test charges 1300 +500 specimen charge
8.1, Table 3(Puncture resistance , Annex C)	-	1100	NIL
6.1, Table 1(Tear resistence. B) Transverse direction )	-	750	NIL
5.1.6b(Ash Content, Annex-A)	-	1200	NIL
5.1.6c(Carbon Black Dispersion, Cl.16 of IS 2530)	-	700	NIL
5.1.6a(Carbon Black Content, Annex-A)	-	925	NIL
8.1, Table 3(Tensile properties ,A) Yield strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	1300	NIL
9.1, Table 4(Tensile properties , B) Break strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	1800	Test charges 1300 +specimen charges 500
6.1, Table 1(Dartimpact strength Method B of IS 13360 (Part-5/sec-6) )	-	850	NIL
6.1, Table 1(Tear resistence. A) Machine direction Annex B)	-	1250	Test charges 750 + specimen charges 500
8.1, Table 3(Tear resistance , Annex B)	-	1300	NIL
8.1, Table 3(Tensile properties , B) Break strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	1300	NIL
8.1, Table 3(Tensile properties ,C) Yield elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	1300	NIL
9.1, Table 4(Tensile properties ,D) Break elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	1300	NIL

31 Dec, 2026

-
-

8087

EMC Testing and Compliance LLP, Gurugram

8141526

IS 6721 (2023)

SANDAL AND SLIPPERS SPECIFICATION First revision

47000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. No.4(SHAPE AND DESIGN)	-	100	-
Cl. No.5("SIZE AND FITTINGS ")	-	100	-
Cl. No.6("CONSTRUCTION ")	-	100	-
Cl. No.7(MATERIAL)	-	100	-
Cl. No.8.1, Table no. 1(i),a("Tear strength, (other than moulded upper material) ")	-	500	-
Cl. No.8.1, Table no. 1(i),b("For all moulded upper material ")	-	1500	-
Cl. No.8.1, Table no. 1(ii)(Flexing endurance)	-	1500	-
Cl. No.8.2,Table no. 2(i)(Tear strength)	-	500	-
Cl. No.8.2,Table no. 2(ii),a("Abrasion resistance- At dry condition")	-	1350	-
Cl. No.8.2,Table no. 2(ii),b("Abrasion resistance- At wet condition")	-	1350	-
Cl. No.8.3,Table no. 3(i)(Tear strength)	-	500	-
Cl. No.8.3,Table no. 3(ii),a("Abrasion resistance- At dry condition")	-	1350	-
Cl. No.8.3,Table no. 3(ii),b("Abrasion resistance- At wet condition")	-	1350	-
Cl. No.8.4,Table no. 4(i)(Grain crack index)	-	900	-
Cl. No.8.4,Table no. 4(ii)(Density)	-	300	-
Cl. No.8.4,Table no. 4(iii)(Abrasion resistance)	-	1350	-
Cl. No.8.4,Table no. 5(i)(Density)	-	300	-
Cl. No.8.4,Table no. 5(ii)("Abrasion resistance, Volume loss ")	-	1080	-
Cl. No.8.4, Table no. 5(iii)("Flexing resistance, At 30 000 flexes")	-	1350	-
Cl. No.8.5, Table no. 6(i)("Bond strength, N/mm, Min (Applicable when fore part is fully covered or strap width is more than 25 mm)")	-	1080	-
Cl. No.8.5, Table no. 6(ii)("Toe post attachment strength, N, Min (Applicable if toe post is present)")	-	800	-
Cl. No.8.5, Table no. 6(iii)("Toe ring attachment strength, Min (Applicable if toe ring is not integral part of upper")	-	800	-
Cl. No.8.5, Table no. 6(iv)(Strap to outsole strength)	-	800	-
Cl. No.8.5, Table no. 6(v)("Attachment strength of back strap and Buckle/D-ring ")	-	800	-
Cl. No.8.5, Table no. 6(vi)("Attachment strength of elastic, limit of useful extension, percent")	-	800	-
Cl. No.8.5, Table no. 6(vii)("Attachment strength of back strap and velcro, N, Min (If, present)")	-	800	-
Cl. No.8.5, Table no. 6(viii)("Hydrolysis resistance, Cut growth after 150 000 flexes, mm, Max (Applicable for PU sole only)")	-	2700	-
Cl. No.8.5, Table no. 6(ix)("Heel pull off strength, N, Min (Applicable for heel height 40 mm and above attached separately to the sandal/slipper)")	-	1200	-
Cl. No.8.5, Table no. 6(x)("Inter layer bond strength, N/mm, (Applicable for multi-layer sole)")	-	1080	-
Cl. No.8.5, Table no. 6(xi)("Slip Resistance, Coefficient of Friction (COF) (Not applicable for leather sole) (To be carried out on quarry tiles)")	-	2500	-
Cl. No.8.("Requirement of Complete Sandal and Slipper (Chemical Requirements) ")	-	35000	WITH CHEMICAL TEST 47000, WITHOUT 12000 10% DISCOUNT TO BIS
Cl. No.9.(MARKING AND PACKING)	-	180	-
Cl. No.8.6.1,Table 1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	4500	-
Cl. No.8.6.1,Table 1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	3700	-
Cl. No.8.6.1,Table 1 of IS 17011(iv)(Chromium (VI))	-	2100	-
Cl. No.8.6.1,Table 1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	5000	-
Cl. No.8.6.1,Table 1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	2500	-
Cl. No.8.6.1,Table 1 of IS 17011(vii)(Formaldehyde)	-	2500	-
Cl. No.8.6.1,Table 1 of IS 17011(viii)(Organotin compounds)	-	7000	-
Cl. No.8.6.1,Table 1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	4500	-
Cl. No.8.6.1,Table 1 of IS 17011(x)(pH)	-	500	-
Cl. No.8.6.1,Table 1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	6000	-
Cl. No.8.6.1,Table 1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	3500	-
Cl. No.8.6.2(Lead content)	-	2000	-
Cl-5 ((Amendment No-1)(Category And Type)	-	0	-
Cl.8 Table-1 S.No 1, (i) (Amendment No-1)(Bond strength , N/mm, Min)	-	1080	-
Cl.8 Table-1 S.No 1, (ii) (Amendment No-1)(Toe post attachment strength)	-	800	-
Cl.8 Table-1 S.No 1, (iii) (Amendment No-1)(Toe ring attachment strength)	-	800	-
Cl.8 Table-1 S.No 1, (iv) (Amendment No-1)(Strap to outsole strength N, Min)	-	800	-
Cl.8 Table-1 S.No 1, (v) (Amendment No-1)(Attachment strength of back strap and buckle/D-ring N, Min)	-	800	-
Cl.8 Table-1 S.No 1, (vi) (Amendment No-1)(Limit of useful extension, percent, Min)	-	1000	-
Cl.8 Table-1 S.No 1, (vii) (Amendment No-1)(Attachment strength of back strap and velcro, N, Mi)	-	800	-
Cl.8 Table-1 S.No 1, (viii) (Amendment No-1)(Hydrolysis resistance)	-	2700	-
Cl.8 Table-1 S.No 1, (ix) (Amendment No-1)(Heel pull off strength)	-	1200	-
Cl.8 Table-1 S.No 1, (x) (Amendment No-1)(Inter layer bond strength)	-	1080	-
Cl.8 Table-1 S.No 1, (xi) (Amendment No-1)(Slip resistance, coefficient of friction (COF)3)	-	2500	-
Cl.8 Table-1 S.No 1, (xii) (Amendment No-1)(Abrasion resistance, (volume loss) mm3 , Max)	-	1080	-
Cl.8 Table-1 S.No 1, (xiii) (Amendment No-1)("Flexing resistance (Belt method or Bennewart flex method)")	-	1080	-
Cl.8 Table-1 S.No 1, (xiv) (Amendment No-1)(Chemical Requirements)	-	30000	-
Cl.8 Table-1 S.No 1, (xv) (Amendment No-1)(Lead content (as Pb)7 ppm)	-	650	-
Cl.9 Table-2 S.No 1, (i) a (Amendment No-1)(Tear strength for other than moulded upper material)	-	500	-
Cl.9 Table-2 S.No 1, (ii) (Amendment No-1)(Flexing endurance)	-	1500	-
Cl.9 Table-3 S.No 1, (i) (Amendment No-1)(Tear strength, N, Min)	-	500	-
Cl.9 Table-3 S.No 1, (ii) (Amendment No-1)("Abrasion resistance (a) dry condition (b) wet condition")	-	1080	-
Cl.9 Table-4 S.No 1, (i) (Amendment No-1)(Tear strength, N, Min)	-	500	-
Cl.9 Table-4 S.No 1, (ii) (Amendment No-1)("Abrasion resistance (a) dry condition (b) wet condition")	-	1080	-
Cl.9 Table-5 S.No 1, (i) (Amendment No-1)(Grain crack index)	-	900	-
Cl.9 Table-5 S.No 1, (ii) (Amendment No-1)(Density, g/cm3 , Min)	-	300	-
Cl.9 Table-5 S.No 1, (iii) (Amendment No-1)(Abrasion resistance, mm/kcs)	-	1350	-
Cl.9 Table-6 S.No 1, (i) (Amendment No-1)("Density, g/cm3 , Min (a)-Cellular, (b) Solid ")	-	300	-
Cl-10 (Amendment No-1)(Marking)	-	150	-

19 Jul, 2027

-
-

8088

EMC Testing and Compliance LLP, Gurugram

8141526

IS 10702 (2023)

Hawai Chappal-Specification

42000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Material)	-	180	-
4.2(Length)	-	180	-
4.3(Thickness)	-	180	-
4.4 , Table No. 1 , i)(Density)	-	300	-
4.4 , Table No. 1 , ii)(2Compression set at constant stress)	-	1000	-
4.4 , Table No. 1 , iii)(3Split tear strength)	-	500	-
4.4 , Table No. 1 , iv)("Shrinkage at 50 ºC ± 1 ºC for 24 h for polymeric material, Shrinkage at 100 ºC ± 1 ºC for 1 h for rubber")	-	2000	-
4.4 , Table No. 1 , v)(5Abrasion resistance at applied force)	-	1080	-
4.4 , Table No. 1 , vi)(Flexing resistance: Maximum cut growth at 50 000 flexes)	-	1500	-
4.4 , Table No. 1 , vii)(7 Hydrolysis resistance, Maximum cut growth at 50 000 flexes)	-	2700	-
4.4 , Table No . 2 , i)(Density , Solid strap, Cellular strap)	-	300	-
4.4 , Table No . 2 , ii)("Breaking strength , Strap to strap and Toe portion to strap , Elongation at break")	-	500	-
4.4 , Table No . 2 , iii)(Minimum cross section of the stud)	-	180	-
4.4 , Table No . 2 , iv)(Stud bolt)	-	180	-
4.4 , Table No . 3 , i)(Toe post attachment strength)	-	800	-
4.4 , Table No . 3 , ii)(Attachment strength of rear strap)	-	800	-
4.4 , Table No . 3 , iii)(Inter layer bond strength)	-	1080	-
5(CHEMICAL REQUIREMENT FOR HAWAI CHAPPAL)	-	35000	WITHOUT CHEMICAL 7000 10% DISCOUNT TO BIS
6(MARKING AND PACKING)	-	150	-
Cl-4 ((Amendment No-1)(Category And Type)	-	0	-
Cl-4.4, Table -1 S. No-1 (i) (Amendment No-1)(Compression set at constant stress)	-	1000	-
Cl-4.4, Table -1 S. No-1 (ii) (Amendment No-1)(Split tear strength)	-	500	-
Cl-4.4, Table -1 S. No-1 (iii) (a)(Amendment No-1)("Shrinkage at Shrinkage at 50 °C ± 1 °C for 2 h for polymeric material, percent, Max ")	-	2000	-
Cl-4.4, Table -1 S. No-1 (iii)(b) (Amendment No-1)(Shrinkage at 100 °C ± 1 °C for 1 h for rubber, percent, Max)	-	1000	-
Cl-4.4, Table -1 S. No-1 (iv) (Amendment No-1)(Abrasion resistance at applied force)	-	1080	-
Cl-4.4, Table -1 S. No-1 (v) (Amendment No-1)(Flexing resistance: Maximum cut growth,)	-	1500	-
Cl-4.4, Table -1 S. No-1 (vi) (Amendment No-1)(Hydrolysis resistance:Maximum cut growth)	-	2700	-
Cl-4.4, Table -1 S. No-1 (vii) (Amendment No-1)(Chemical requirements)	-	30000	-
Cl-4.4, Table -1 S. No-1 (viii) (Amendment No-1)("Lead content (as Pb), ppm, Max")	-	650	-
Cl-4.4, Table -2 S. No-1 (i), a (Amendment No-1)("Breaking strength for Strap to strap 1-Solid strap 2-Cellular strap")	-	250	-
Cl-4.4, Table -2 S. No-1 (i), b (Amendment No-1)("Breaking strength for Toe portion to strap 1-Solid strap 2-Cellular strap")	-	250	-
Cl-4.4, Table -2 S. No-1 (i), c (Amendment No-1)("Elongation at break , percent, Min 1-Solid strap 2-Cellular strap")	-	250	-
Cl-4.4, Table -2 S. No-1 (ii), (Amendment No-1)(Chemical requirements)	-	30000	-
Cl-4.4, Table -2 S. No-1 (iii), (Amendment No-1)(Lead content (as Pb), in ppm, Max)	-	650	-
Cl-4.4, Table -3 S. No-1 (i), (Amendment No-1)(Toe post attachment strength)	-	800	-
Cl-4.4, Table -3 S. No-1 (ii), (Amendment No-1)(Attachment strength of rear strap)	-	800	-
Cl-4.4, Table -3 S. No-1 (iii), (Amendment No-1)(Inter layer bond strength)	-	1080	-

19 Jul, 2027

-
-

8089

EMC Testing and Compliance LLP, Gurugram

8141526

IS 17043 : Part 1 (2024)

Shoes - Specification Part 1 Shoes for Services

42000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.2(Design)	-	100	-
Cl-4.3.1(Size)	-	100	-
Cl-4.3.2(Weight)	-	150	-
Cl-4.4(Height of Upper)	-	180	-
Cl-4.5, S.Cl-4.5.2(Ergonomic Feature)	-	300	-
Cl-4.5, S.Cl-4.5.3(Bond Strength)	-	1080	-
Cl-4.5, S.Cl-4.5.4(Slip Resistance)	-	2500	-
Cl-4.5.5.1(Electrical Properties-Antistatic footwear)	-	3000	-
Cl-4.5, S.Cl-4.5.6(Heat Insulation of Sole Complex)	-	900	-
Cl-4.5, S.Cl-4.5.7(Cold Insulation of Sole Complex)	-	900	-
Cl-4.6.1(Material)	-	100	-
Cl-4.6.2(Tear Strength)	-	500	-
Cl-4.6.3(Water Vapour Permeability and Coefficient)	-	630	-
Cl-4.6.4(Water Penetration and Water Absorption)	-	630	-
Cl-4.7.1(Material)	-	100	-
Cl-4.7.2(Tear Strength)	-	500	-
Cl-4.7.3(Abrasion Resistance)	-	1080	-
Cl-4.7.4(Water Vapour Permeability and Coefficient)	-	630	-
Cl. 4.8.1(Material)	-	100	-
Cl-4.8.2(Abrasion Resistance)	-	800	-
Cl-4.8.3(Water Absorption and Desorption)	-	630	-
Cl-4.9.3(Abrasion Resistance)	-	1080	-
Cl-4.10(Toe Puff and Counter Stiffener)	-	280	-
Cl-4.11.1(Material)	-	100	-
Cl-4.11.2(Tear Strength)	-	500	-
Cl-4.12(Closing Thread)	-	100	-
Cl-4.13.2(Thickness)	-	100	-
Cl-4.13.3(Moulded Density)	-	300	-
Cl-4.13.4(Hardness)	-	600	-
Cl-4.13.5(Ageing Test)	-	2000	-
Cl-4.13.6(Tear Strength)	-	500	-
Cl-4.13.7(Abrasion Resistance)	-	1080	-
Cl-4.13.8(Flexing Resistance)	-	1080	-
Cl-4.14(Eyelet)	-	100	-
Cl-4.15.2(Breaking Load and Tag Retention)	-	500	-
Cl-5(Chemical Requirements)	-	30000	-
Cl-7(Marking)	-	150	-
Cl.4.5.8(Energy Absorption of Seat Region)	-	630	-
Cl- 4.5.3.1(Upper-outsole bond strength)	-	1080	-
Cl.4.5.3.2(Interlayer bond strength)	-	1080	-
Cl-4.2(Design)	-	100	-
Cl-4.3.1(Size)	-	100	-
Cl-4.3.2(Weight)	-	150	-
Cl-4.4(Height of Upper)	-	180	-
Cl-4.5, S.Cl-4.5.2(Ergonomic Feature)	-	300	-
Cl-4.5, S.Cl-4.5.3(Bond Strength)	-	1080	-
Cl-4.5, S.Cl-4.5.4(Slip Resistance)	-	2500	-
Cl-4.5.5.1(Electrical Properties-Antistatic footwear)	-	3000	-
Cl-4.5, S.Cl-4.5.6(Heat Insulation of Sole Complex)	-	900	-
Cl-4.5, S.Cl-4.5.7(Cold Insulation of Sole Complex)	-	900	-
Cl-4.6.1(Material)	-	100	-
Cl-4.6.2(Tear Strength)	-	500	-
Cl-4.6.3(Water Vapour Permeability and Coefficient)	-	630	-
Cl-4.6.4(Water Penetration and Water Absorption)	-	630	-
Cl-4.7.1(Material)	-	100	-
Cl-4.7.2(Tear Strength)	-	500	-
Cl-4.7.3(Abrasion Resistance)	-	1080	-
Cl-4.7.4(Water Vapour Permeability and Coefficient)	-	630	-
Cl. 4.8.1(Material)	-	100	-
Cl-4.8.2(Abrasion Resistance)	-	1080	-
Cl-4.8.3(Water Absorption and Desorption)	-	630	-
Cl-4.9.3(Abrasion Resistance)	-	1080	-
Cl-4.10(Toe Puff and Counter Stiffener)	-	280	-
Cl-4.11.1(Material)	-	100	-
Cl-4.11.2(Tear Strength)	-	500	-
Cl-4.12(Closing Thread)	-	100	-
Cl-4.13.2(Thickness)	-	100	-
Cl-4.13.3(Moulded Density)	-	300	-
Cl-4.13.4(Hardness)	-	600	-
Cl-4.13.5(Ageing Test)	-	2000	-
Cl-4.13.6(Tear Strength)	-	500	-
Cl-4.13.7(Abrasion Resistance)	-	1080	-
Cl-4.13.8(Flexing Resistance)	-	1080	-
Cl-4.14(Eyelet)	-	100	-
Cl-4.15.2(Breaking Load and Tag Retention)	-	500	-
Cl-5(Chemical Requirements)	-	30000	-
Cl-7(Marking)	-	150	-
Cl.4.5.8(Energy Absorption of Seat Region)	-	630	-
Cl- 4.5.3.1(Upper-outsole bond strength)	-	1080	-
Cl.4.5.3.2(Interlayer bond strength)	-	1080	-
Cl-4.9.1(Material)	-	100	-
Cl-4.9.2(Water Absorption and Desorption)	-	630	-
Cl-4.13.1(Material)	-	100	-
Cl-4.4(Height of Upper)	-	150	-
Cl-4.6.3(Water Vapour Permeability and Coefficient)	-	800	-
Cl-4.6.4(Water Penetration and Water Absorption)	-	800	-
Cl-4.7.4(Water Vapour Permeability and Coefficient)	-	800	-
Cl-4.8.2(Abrasion Resistance)	-	800	-
Cl-4.8.3(Water Absorption and Desorption)	-	800	-
Cl-7(Marking)	-	100	-
Cl-4.9.1(Material)	-	100	-
Cl-4.9.2(Water Absorption and Desorption)	-	1080	-
Cl-4.13.1(Material)	-	100	-

19 Jul, 2027

-
-

8090

EMC Testing and Compliance LLP, Gurugram

8141526

IS 13893 (1994)

Polyurethane soles semirigid - specification

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.3.2(Ageing test)	-	2700	-
4.3(Ross Flex test)	-	2000	-
4.3(Flexural strength )	-	2000	-
4.3(Abrasion Resistance)	-	1080	-
4.3(Elongation at break)	-	500	-
4.3(Tensile Strength )	-	500	-
4.3(Hardness Shore(A))	-	300	-
4.3(Relative density )	-	300	-
4.2(Thickness )	-	180	-
4.1(Design)	-	150	-
Cl.5, 5.1, 5.2(Packing And Marking)	-	180	-
4.2 (Amendment 2)(Thickness)	-	100	-
4.3.1 Table 1 i) (Amendment 2)(Relative Density)	-	300	-
4.3.1 Table 1 iii) (Amendment 2)(Abrasion Resistance at applied force of 10 N)	-	1080	-
4.3.1 Table 1 iv) (Amendment 2)(Flexing Resistance, Bennewart method)	-	1080	-
4.3.1 Table 1 v) (Amendment 2)(Hydrolysis Resistance, cut growth after 150000 flexes)	-	2700	-
4.3.1 Table 1 vi) (Amendment 2)(Tensile Strength)	-	250	-
4.3.1 Table 1 vii) (Amendment 2)(Elongation at break)	-	250	-
4.3.1 Table 1 viii) (Amendment 2)(Tear Strength (average force))	-	500	-
4.3.1 Table 1 ii) (Amendment 2)(Hardness, degree, Shore A)	-	600	-

19 Jul, 2027

-
-

8091

EMC Testing and Compliance LLP, Gurugram

8141526

IS 5676 (1995)

Moulded solid rubber soles and heels - SpecificatlOn (Second Revision)

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5/5.1(REQUIREMENTS-General)	-	100	-
5/5.5- Table1(REQUIREMENTS-Thickness)	-	180	-
6(Marking and packing)	-	180	-
5/5.7- Table2(REQUIREMENTS- Physical Requirements- as per IS 3400 (Part 1, Part 2, Part 4, Part 9, Part 10, Part 16))	-	4000	-
Cl.6.1,6.2,6.3(Marking and packing)	-	180	-
5/5.2- Fig. 1 to 5(REQUIREMENTS-Design)	-	100	-
5/5.3/5.3.1(REQUIREMENTS- Construction)	-	150	-
5/5.6/5.6.1(REQUIREMENTS-Channel)	-	100	-
8.3(Measurement of thickness)	-	180	-
5.5 (Amendment 1)(Thickness)	-	180	-
5.7 Table 2 i) (Amendment 1)(Relative Density)	-	300	-
5.7, Table 2 ii) (Amendment 1)(Hardness, degree, Shore A)	-	600	-
5.7, Table 2 iv) (Amendment 1)(Abrasion Resistance at applied force of 10 N)	-	1080	-
5.7, Table 2 v) (Amendment 1)(Tensile strength)	-	250	-
5.7, Table 2 vi) (Amendment 1)(Elongation at break)	-	250	-
5.7, Table 2 vii) (Amendment 1)(Tear strength (average force))	-	500	-
5.7, Table 2 iii) (Amendment 1)(Flexing resistance)	-	1080	-

19 Jul, 2027

-
-

8092

EMC Testing and Compliance LLP, Gurugram

8141526

IS 374 (2019)

Specification for electric ceiling type fans and regulators (Third Revision)

Upto and including 250V supply for Household and simila

26250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	500	10% discount on BIS samples
8.1(Marking (as per Cl. 7 of IS 302-2-80:2017))	-	500	10% discount on BIS samples
8.1,a(Marking )	-	500	10% discount on BIS samples
8.1,b(Marking )	-	500	10% discount on BIS samples
8.1,c(Marking )	-	500	10% discount on BIS samples
8.1,d(Marking )	-	500	10% discount on BIS samples
8.1,e(Marking )	-	500	10% discount on BIS samples
8.1,f(Marking )	-	500	10% discount on BIS samples
8.1,g(Marking )	-	500	10% discount on BIS samples
8.2(Marking )	-	500	10% discount on BIS samples
8.3,a(Marking )	-	500	10% discount on BIS samples
8.3,b(Marking )	-	500	10% discount on BIS samples
8.3,c(Marking )	-	500	10% discount on BIS samples
8.3,d(Marking )	-	500	10% discount on BIS samples
8.3,e(Marking )	-	500	10% discount on BIS samples
8.4(Marking )	-	500	10% discount on BIS samples
8(Marking (as per Cl. 7.1 of IS 302-2-80:2017))	-	500	10% discount on BIS samples
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1 (f) of IS 302-1:2008))	-	500	10% discount on BIS samples
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1(g) of IS 302-1:2008))	-	500	10% discount on BIS samples
8(Marking (as per Cl.7.12.1(a) of IS 302-2-80:2017))	-	500	10% discount on BIS samples
6.2(Rating)	-	500	10% discount on BIS samples
9(Protection against access to live parts (as per Cl.8 of IS 302-2-80 :2017))	-	2000	10% discount on BIS samples
9(Power Input & current (as per Cl.10 of IS 302-2-80 :2017))	-	2000	10% discount on BIS samples
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	2000	10% discount on BIS samples
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	2000	10% discount on BIS samples
9(Transient over Voltage (as per Cl.14 of IS 302-2-80 :2017))	-	5000	10% discount on BIS samples
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	5000	10% discount on BIS samples
9(Overload protection of transformers and associated circuits (as per Cl.17 of IS 302-2-80 :2017))	-	2000	10% discount on BIS samples
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	2000	10% discount on BIS samples
9(Staibilty and mechanical hazards (as per Cl.20.102, Table 101 of IS 302-2-80 :2017))	-	2000	10% discount on BIS samples
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008))	-	2000	10% discount on BIS samples
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017))	-	2000	10% discount on BIS samples
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	2000	10% discount on BIS samples
9(Construction (as per Cl.22.101 of IS 302-2-80 :2017))	-	2000	10% discount on BIS samples
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	2000	10% discount on BIS samples
9(Components (as per Cl.24.103 of IS 302-2-80 :2017))	-	2000	10% discount on BIS samples
9(Components (as per Cl.24.104 of IS 302-2-80 :2017))	-	2000	10% discount on BIS samples
9(Supply Connection and External Flexible cords (as per Cl.25 of IS 302-2-80 :2017))	-	2000	10% discount on BIS samples
9(Terminals for External conductors (as per Cl.26 of IS 302-2-80 :2017))	-	2000	10% discount on BIS samples
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	2000	10% discount on BIS samples
9(Screw and connections (as per Cl.28 of IS 302-2-80 :2017))	-	1000	10% discount on BIS samples
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	1000	10% discount on BIS samples
9(Resistance to fire (Glow wire Test) (as per Cl.30 of IS 302-2-80 :2017))	-	2000	10% discount on BIS samples
9(Resistance to rusting (as per Cl.31 of IS 302-2-80 :2017))	-	2000	10% discount on BIS samples
10.1(Speed Regulators)	-	2000	10% discount on BIS samples
10.2(Speed Regulators)	-	2000	10% discount on BIS samples
10.3(Speed Regulators)	-	2000	10% discount on BIS samples
10.4(Speed Regulators)	-	2000	10% discount on BIS samples
10.5(Speed Regulators)	-	2000	10% discount on BIS samples
10.6(Speed Regulators)	-	2000	10% discount on BIS samples
10.7(Speed Regulators)	-	2000	10% discount on BIS samples
10.8(Speed Regulators)	-	2000	10% discount on BIS samples
11.1(Starting)	-	2000	10% discount on BIS samples
11.2(Starting)	-	2000	10% discount on BIS samples
12(Interchangeability)	-	2000	10% discount on BIS samples
13(Silent Operation)	-	5000	10% discount on BIS samples
14.3 & Table 1(Test for Air Performance)	-	5000	10% discount on BIS samples
14.4(Measurement of Speed of the Fan )	-	4000	10% discount on BIS samples
14.5(Measurement of Power factor and Power Input)	-	4000	10% discount on BIS samples
16(Endurance Test)	-	5000	10% discount on BIS samples
17(Test for Harmonic Distortion)	-	4000	10% discount on BIS samples
4(GENERAL REQUIREMENTS)	-	1000	-
5(GENERAL NOTES ON TESTS)	-	1000	-
15.1, 15.2(Air delivery and service value)	-	12000	-

19 Jul, 2027

-
-

8093

EMC Testing and Compliance LLP, Gurugram

8141526

IS 17043 (2018)

Derby shoes - Specification

54000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.0(Innocuosness test IS 17011)	-	35000	Innocuosness test price: 35000; without Innocuosness 19000 per sample 10% discount to BIS
4.15.2(Breaking load & tag retention)	-	500	-
4.15.1(Length of laces )	-	100	-
4.14(Eyelet pull out test)	-	100	-
4.13.8(Flex resistance )	-	1080	-
4.13.7(Abrasion resistance )	-	1080	-
4.13.6(Tear Strength)	-	800	-
4.13.5(Ageing test)	-	500	-
4.13.4(Hardness (IRHD))	-	2000	-
4.13.3(Density )	-	300	-
4.13.2(Thickness )	-	180	-
4.13.1(Meterial)	-	180	-
4.12(Breaking Strength of thread)	-	800	-
4.11.2(Tear Strength)	-	500	-
4.11.1(Thickness )	-	180	-
4.10(Toe Puff & counter stiffener thickness )	-	180	-
4.9.3(Abrasion resistance )	-	800	-
4.9.2(Water absorption & desorption )	-	630	-
4.9.1(Thickness )	-	180	-
4.8.3(Water absorption & desorption )	-	630	-
4.8.2(Abrasion )	-	800	-
4.8.1(Thickness )	-	180	-
4.7.4(Water vapour permeability & coefficent )	-	630	-
4.7.3(Abrasion resistance )	-	800	-
4.7.2(Tear Strength)	-	500	-
4.7.1(Thickness )	-	180	-
4.6.4(Water penetration and water absorption)	-	630	-
4.6.3(Water vapour permeability & coefficent )	-	630	-
4.6.2(Tear Strength)	-	500	-
4.6.1(Thickness )	-	180	-
4.5.8(Energy absorption of seat region )	-	630	-
4.5.7(Cold insulation tester )	-	900	-
4.5.6(Heat insulation of sole complex)	-	900	-
4.5.5.1(Electrical Properties Antistatic )	-	3000	-
4.5.4(Slip Resitance)	-	2500	-
4.5.3.2(Interayer bond strength)	-	1080	-
4.5.3.1(Upper/outsole bond strength)	-	1080	-
4.5.2(Ergonomic Feature)	-	300	-
4.5.1(Contruction)	-	100	-
4.4(Height of upper )	-	180	-
4.3.2(Weight)	-	180	-
4.3.1(Size)	-	180	-
4.2(Design )	-	180	-
4.1(General)	-	180	-
7(Marking)	-	150	-

19 Jul, 2027

-
-

8094

EMC Testing and Compliance LLP, Gurugram

8141526

IS 16994 (2018)

Footwear for Men and Women for Municipal Scavenging Work

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.6(Leak Proof test)	-	900	.
8.4(Volatility & lead content )	-	800	.
8.3(Compression Resistance)	-	630	.
8.3(Impact resistance )	-	630	.
8.2(Internal Toe cap length)	-	180	.
8.1(Height of upper )	-	1080	.
8.0(Construction)	-	180	.
7.10(Ageing test)	-	2000	.
7.9(Hydrolysis)	-	2700	.
7.8(Insocks Material )	-	100	.
7.7.5(Upper / Outsole bond strength)	-	1080	.
7.7.4(Interlayer Bond Strength )	-	1080	.
7.7.3(Flexing Resistance )	-	1080	.
7.7.2(Abrasion Resistance)	-	1080	.
7.7.1(Tear Strength )	-	500	.
7.7(Hardness (IRHD))	-	300	.
7.7(Thickness)	-	180	.
7.7(Density )	-	300	.
7.6(Peel Strength )	-	1080	.
7.6(Shape retention)	-	800	.
7.6(Moisture )	-	800	.
7.6(Resilience test )	-	800	.
7.6(1st Dry collapsing load, hardness)	-	800	.
7.5(Insocks )	-	800	.
7.5(Insoles )	-	1350	.
7.5(Water abrasion & desorption)	-	630	.
7.5(Thickness )	-	180	.
7.4(Tensile Strength )	-	500	.
7.4(Abrasion Resistance)	-	1350	.
7.4(Tear Strength )	-	500	.
7.3(Flexing Resistance )	-	1500	.
7.3(Tensile Strength )	-	500	.
7.3(Thickness )	-	180	.
7.3(Water Vapour permeability & coefficient )	-	700	.
7.3(Tear Strength )	-	1080	.
7.1(Compression Tester)	-	630	.
7.1(Impact resistance)	-	630	.

19 Jul, 2027

-
-

8095

EMC Testing and Compliance LLP, Gurugram

8141526

IS 17037 (2018)

Anti riot shoes - Specification

60000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.0(Innocuosness test IS 17011)	-	35000	WITHOUT INNOCOUSNESS 25000 10% DISCOUNT TO BIS
4.16.2(Breaking load & lag retention)	-	1080	-
4.16.1(Length of laces )	-	180	-
4.15(D-ring and Hooks )	-	180	-
4.14.10(Resistance to fuel oil)	-	900	-
4.14.9(Resistance to hot contact)	-	800	-
4.14.8(Flex resistance)	-	2000	-
4.14.7(Abrasion resistance)	-	1080	-
4.14.6(Tear Strength)	-	500	-
4.14.5(Ageing test)	-	2000	-
4.14.4(Hardness (IRHD))	-	1500	-
4.14.3(Density )	-	180	-
4.14.2(Thickness )	-	180	-
4.14.1(Meterial)	-	180	-
4.13(Breaking Strength of thread)	-	180	-
4.12.2(Tear Strength)	-	500	-
4.12.1(Thickness )	-	180	-
4.11.2(Tear Strength)	-	500	-
4.11.1(Thickness)	-	180	-
4.10(Counter stiffener thickness)	-	100	-
4.9.3(Water absorption & desorption )	-	630	-
4.9.2(Abrasion resistance )	-	800	-

19 Jul, 2027

-
-

8096

EMC Testing and Compliance LLP, Gurugram

8141526

IS 17012 (2018)

High ankle tactical boots with pu - Rubber sole - Specification

60000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.0(Innocuousness Test IS 17011)	-	35000	WITH INNCOUSNESS TEST 60000, WITHOUT 25000 PER SAMPLE 10% DISCOUNT TO BIS
4.16.2(Breaking Strength of lace )	-	430	-
4.16.1(Length of lace )	-	180	-
4.15(D-ring & Hooks )	-	180	-
6.1(Resistance to Fuel Oil)	-	1500	-
4.14.9(Resistance to hot contact )	-	1500	-
4.14.8(Flexing resistance )	-	900	-
4.14.7(Ageing test)	-	2500	-
4.14.6(Hardness (IRHD))	-	1080	-
4.14.5(Abrasion resistance )	-	900	-
4.14.4(Tear Strength)	-	630	-
4.14.3(Sole Density )	-	180	-
4.14.2(Thickness)	-	180	-
4.14.1(Material)	-	180	-
4.13(Breaking Strength of thread )	-	180	-
4.12.2(Tear Strength)	-	630	-
4.12.1(Thickness )	-	180	-
4.11.2(Tear Strength)	-	630	-
4.11.1(Thickness )	-	180	-
4.10.3(Water absorption & desorption percent)	-	2500	-
4.10.2(Abrasion resistance )	-	630	-
4.10.1(Material)	-	180	-
4.9.3(Water absorption & desorption percent)	-	2500	-
4.9.2(Abrasion resistance )	-	630	-
4.9.1(Thickness)	-	180	-
4.8(Thickness Toe puff & counter stiffener)	-	180	-
4.7.5(Water Vapour permeability & coefficient )	-	1080	-
4.7.4(Abrasion resistance )	-	630	-
4.7.3(Tear Strength)	-	900	-
4.7.2(Material Counter & Tongue)	-	180	-
4.7.1(Material vamp & Quarter)	-	180	-
4.6.3(Water Penetration and water absorption )	-	1080	-
4.6.2(Tear Strength)	-	630	-
4.6.1(Thickness )	-	180	-
4.5.8(Energy absorption of seat region )	-	630	-
4.5.7(Cold Insulation of sole complex)	-	900	-
4.5.6(Heat Insulation of sole Complex)	-	900	-
4.5.5(Antistatic test)	-	3000	-
4.5.4(Slip Resitance)	-	2500	-
4.5.3.2(Interayer bond strength)	-	1080	-
4.5.3.1(Upper/outsole bond strength)	-	1080	-
4.5.2(Ergonomic Feature)	-	300	-
4.5.1(Construction)	-	180	-
4.4(Height of upper )	-	180	-
4.3.2(Weight)	-	180	-
4.3.1(Size)	-	180	-
4.2(Design )	-	180	-

19 Jul, 2027

-
-

8097

EMC Testing and Compliance LLP, Gurugram

8141526

IS 15644 (2006)

Safety of electric toys

14500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.0(Marking and instructions)	-	1000	-
8.0(Power Input)	-	3000	-
9.0(Heating and abnormal operation)	-	3000	-
10.0(Electrical strength at operating temperature)	-	2000	-
11.1(Moisture resistance)	-	2500	-
11.2(Resistant to humidity)	-	2500	-
12.0(Electric strength at room temperature)	-	2000	-
13.0(Mechanical strength)	-	1000	-
14.1(Construction)	-	500	-
14.2(Construction)	-	500	-
14.3(Construction)	-	500	-
14.4(Construction)	-	500	-
14.5(Construction)	-	500	-
14.6(Construction)	-	500	-
14.7(Construction)	-	500	-
14.8(Construction)	-	500	-
14.9(Construction)	-	500	-
14.1(Construction)	-	500	-
14.11(Construction)	-	500	-
14.12(Construction)	-	500	-
14.13(Construction)	-	500	-
14.14(Construction)	-	500	-
15.1(Protection of cords and wires)	-	500	-
15.2(Protection of cords and wires)	-	500	-
16.0(Components)	-	2000	-
17 Table-1(Screws and connections)	-	1000	-
17 Table-1(Nominal daimeter of screws made of insulating material)	-	1000	-
18.0(Clearance and creepage distance)	-	1000	-
19.1(Ball pressure test IEC 60695-10-2)	-	500	-
19.2.1(Glow wire test IEC 60695-2-11)	-	500	-
19.2.2(Needle flame test)	-	1000	-
20.0(Radiation, toxicity and similar hazards)	-	2000	-
14.15(Construction)	-	500	-
14.16(Construction)	-	500	-
9873 (Part-9) 3(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	5000	-
9873 (Part-9) 3(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	5000	-
9873 (Part-9) 3(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	5000	-
9873 (Part-9) 3(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	5000	-
9873 (Part-3) 4.1 - Table 1(Selenium (Se) - Cl 7,8,9 )	-	3000	-
9873 (Part-3) 4.1 - Table 1(Mercury (Hg) - Cl 7,8,9 )	-	3000	-
9873 (Part-3) 4.1 - Table 1(Lead (Pb) - Cl 7,8,9 )	-	3000	-
9873 (Part-3) 4.1 - Table 1(Chromium (Cr) - Cl 7,8,9 )	-	3000	-
9873 (Part-3) 4.1 - Table 1(Cadmium (Cd) - Cl 7,8,9)	-	3000	-
9873 (Part-3) 4.1 - Table 1(Barium (Ba) - Cl 7,8,9 )	-	3000	-
9873 (Part-3) 4.1 - Table 1(Arsenic (As) - Cl 7,8,9 )	-	3000	-
9873 (Part-3) 4.1 - Table 1(Antimony (Sb) - Cl 7,8,9)	-	3000	-

19 Jul, 2027

-
-

8098

EMC Testing and Compliance LLP, Gurugram

8141526

IS 5557 (2004)

Industrial and protective rubber knee and ankle boots - Specification (Fourth Revision)

9550 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5/5.1.7/5.1.7.8(REQUIREMENTS- Physical Requirements-Resistance to oil)	-	900	-
5/5.1.1-Fig. 1, Fig. 2 and Fig. 3(REQUIREMENTS-Design)	-	100	-
5/5.1.2 -IS 1638(REQUIREMENTS-Size)	-	100	-
5/5.1.3-Table1(REQUIREMENTS-Thickness)	-	100	-
5/5.1.4/5.1.4.1-Table2(REQUIREMENTS-Materials-Rubber components)	-	100	-
5/5.1.4/5.1.4.2(REQUIREMENTS-Materials-Fabric- accordance with IS 1969)	-	100	-
5/5.1.4/5.1.4.3(REQUIREMENTS-Materials-Protective Steel Toe Cap- an per IS 5852)	-	100	-
5/5.1.6/5.1.6.1-Fig. 1, Fig. 2, Fig. 3, .Fig. 4, Fig. 5 and Table 3.(REQUIREMENTS- Construction)	-	180	-
5/5.1.6/5.1.6.2(REQUIREMENTS- Construction)	-	180	-
5/5.1.7/5.1.7.1(REQUIREMENTS- Physical Requirements-Heat treatment- as per IS 3400 (Part 4))	-	2000	-
5/5.1.7/5.1.7.2(REQUIREMENTS- Physical Requirements-Composite strength)	-	500	-
5/5.1.7/5.1.7.3-Table 4(REQUIREMENTS- Physical Requirements-Flexing endurance- as per Annex B.)	-	1500	-
5/5.1.7/5.1.7.4(REQUIREMENTS- Physical Requirements- Leakage resistance test)	-	900	-
5/5.1.7/5.1.7.5(REQUIREMENTS- Physical Requirements- Consolidation test- as per IS IS 3400 (Part 5))	-	800	-
5/5.1.7/5.1.7.6(REQUIREMENTS- Physical Requirements- Performance test- as per Annex C)	-	630	-
5/5.1.7/5.1.7.7(REQUIREMENTS- Physical Requirements-Height of the boots)	-	180	-
5/5.1.7/5.1.7.8(REQUIREMENTS- Physical Requirements-Resistance to oil)	-	900	-
5/5.1.1-Fig. 1, Fig. 2 and Fig. 3(REQUIREMENTS-Design)	-	100	-
5/5.1.2 -IS 1638(REQUIREMENTS-Size)	-	100	-
5/5.1.3-Table1(REQUIREMENTS-Thickness)	-	180	-
5/5.1.4/5.1.4.1-Table2(REQUIREMENTS-Materials-Rubber components)	-	100	-
5/5.1.4/5.1.4.2(REQUIREMENTS-Materials-Fabric- accordance with IS 1969)	-	100	-
5/5.1.4/5.1.4.3(REQUIREMENTS-Materials-Protective Steel Toe Cap- an per IS 5852)	-	500	-
5/5.1.6/5.1.6.1-Fig. 1, Fig. 2, Fig. 3, .Fig. 4, Fig. 5 and Table 3.(REQUIREMENTS- Construction)	-	100	-
5/5.1.7/5.1.7.1(REQUIREMENTS- Physical Requirements-Heat treatment- as per IS 3400 (Part 4))	-	2000	-
5/5.1.7/5.1.7.2(REQUIREMENTS- Physical Requirements-Composite strength)	-	500	-
5/5.1.7/5.1.7.3-Table 4(REQUIREMENTS- Physical Requirements-Flexing endurance- as per Annex B.)	-	1500	-
5, 5.1(Requirement)	-	100	-
6.1(Marking)	-	180	-
6, 6.1(Packing)	-	180	-
6.2(Packing)	-	180	-

19 Jul, 2027

-
-

8099

EMC Testing and Compliance LLP, Gurugram

8141526

IS 14544 (1998)

Leather safety foot wear with direct moulded polyvinyl chloride (PVC) sole - Specification

17078 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Types)	-	100	-
5, 5.1(Requirements )	-	100	-
5.2, 5.2.1, 5.2.1.1(Materials - Upper Leather )	-	100	-
5.2.2(Materials - Insole Material )	-	100	-
5.2.3(Materials - Stiffener )	-	100	-
5.2.4(Materials - Lining Material )	-	100	-
5.2.5(Materials - Threads )	-	100	-
5.2.6, 5.2.6.1(Materials - Grinderies - Lasting tacks )	-	100	-
5.2.6, 5.2.6.2(Materials - Grinderies - Shanks)	-	100	-
5.2.6, 5.2.6.3(Materials - Grinderies - Eyelets)	-	100	-
5.2.7(Materials - Cotton NEWAR)	-	100	-
5.2.8(Materials - Toe-Compound)	-	100	-
5.2.9(Materials - Laces)	-	100	-
5.2.10(Materials - Steel Toe Cap)	-	100	-
5.2.11.1 (Table 1)(Sole and Heel )	-	100	-
5.2.11.2(Sole and Heel )	-	100	-
5.2.11.3 (Table 2)(Sole and Heel )	-	100	-
5.2.11.4(Sole and Heel )	-	100	-
5.3 (Table 3)(Components)	-	180	-
5.4.8(Workmanship and Finish)	-	180	-
5.5, 5.5.1(Mass)	-	150	-
5.5, 5.5.2(Mass)	-	150	-
5.5, 5.5.3(Mass)	-	150	-
5.6(Performance Test)	-	630	-
5.7, 5.7.1(Adhesion Test on Moulded Bottoms)	-	1000	-
5.7, 5.7.2(Adhesion Test on Moulded Bottoms)	-	1000	-
7, 7.1(Marking)	-	180	-
7.1.1, 7.1.2(Marking)	-	180	-
5.7(Adhesion Test )	-	1000	-
5.6(Impact resistance )	-	630	-
5.5(Mass per pairs)	-	150	-
5.4(Construction)	-	180	-
5.3(Thickness of components )	-	180	-
5.2.11.4(Ageing Test)	-	2700	-
5.2.11.2(Mass after resistance to chemical effect)	-	150	-
5.2.11(Flexing Resistance )	-	2000	-
5.2.11(Tensile Strength )	-	500	-
5.2.11(Elongation at break)	-	500	-
5.2.11(Hardness (IRHD))	-	600	-
5.2.11(Material Sole & heel )	-	100	-
5.2.9(Length )	-	100	-
5.2.8(Toe-compound )	-	100	-
5.2.7(Width of fabric)	-	100	-
5.2.6.3(Eyelets diameter)	-	100	-
5.2.6.2(Corrosion Shanks )	-	100	-
5.2.6.1(Corrosion test Lasting tacks)	-	100	-
5.2.5(Breaking Strength )	-	500	-
5.2.5(Twist)	-	100	-
5.2.5(Count)	-	100	-
5.2.5(Composition )	-	100	-
5.2.4(Lining Material )	-	100	-
5.2.3(Peel Strength )	-	100	-
5.2.3(Moisture)	-	100	-
5.2.3(Resilience Test)	-	100	-
5.2.3(Shape Retention)	-	100	-
5.2.3(Hardness )	-	600	-
5.2.3(Dry collapsing)	-	100	-
5.2.2(Insole Material )	-	100	-
5.2(Material )	-	100	-

19 Jul, 2027

-
-

8100

EMC Testing and Compliance LLP, Gurugram

8141526

IS 13995 (1995)

Unlined moulded rubber boots - Specification

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.7(Size)	-	100	-
5.1.6(Design)	-	100	-
5.1.5(Flexing resistance of upper)	-	1500	-
5.1.4(Resistance to dry heat ageing )	-	2000	-
5.1.3(Tear Strength)	-	500	-
5.1.2(Tensile Strength (after ageing))	-	2700	-
5.1.1(Tensile Strength (before ageing))	-	500	-
4.1(Thickness )	-	180	-
6, 6.1(Marking)	-	180	-
Cl.6, 6.1(Marking)	-	180	-

19 Jul, 2027

-
-

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number