| 8041 |
Shiva Analyticals (India) Private Limited
| IS 13428 (2005) |
Packaged natural mineral water specification (Second Revision) |
- |
-
|
19200 View breakup
Only micro – Rs. 5,350/-;
Only Chemical tests (exc. RAR) - Rs. 13,850/-;
Only PRs – Rs. 5,300/-;
Total (except RARs)–
Rs. 19,200/-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6.1.1(Escherichia coli(or thermotolerant bacteria)) |
- |
486 |
|
Not Applicable |
| 6.1.2(Coliform , bacteria) |
- |
486 |
|
Not Applicable |
| 6.1.3(Faecal Streptococci ) |
- |
486 |
|
Not Applicable |
| 6.1.3(Staphylococcus Aureus) |
- |
486 |
|
Not Applicable |
| 6.1.4(Sulphite Reducing Anaerobes ) |
- |
486 |
|
Not Applicable |
| 6.1.5(Pseudomonas Aeruginosa ) |
- |
486 |
|
Not Applicable |
| 6.1.6(Yeast and Mould ) |
- |
486 |
|
Not Applicable |
| 6.1.7(Salmonella ) |
- |
486 |
|
Not Applicable |
| 6.1.7(Shigella) |
- |
486 |
|
Not Applicable |
| 6.1.8(Vibrio cholera ) |
- |
486 |
|
Not Applicable |
| 6.1.8(Vibrio parahemolyticus) |
- |
486 |
|
Not Applicable |
| 6.2 Table-1 i(Colour) |
- |
231 |
|
Not Applicable |
| 6.2 Table-1 ii(Odour) |
- |
231 |
|
Not Applicable |
| 6.2 Table-1 iii(Taste) |
- |
231 |
|
Not Applicable |
| 6.2 Table-1 iv(Turbidity) |
- |
231 |
|
Not Applicable |
| 6.2 Table-1 v(Total dissolved solids) |
- |
231 |
|
Not Applicable |
| 6.2 Table-1 vi(pH) |
- |
231 |
|
Not Applicable |
| 6.2 Table-2 viii(Barium (as Ba)) |
- |
231 |
|
Not Applicable |
| 6.2 Table-2 v(Copper (as Cu)) |
- |
231 |
|
Not Applicable |
| 6.2 Table-2 iv(Manganese (as Mn)) |
- |
231 |
|
Not Applicable |
| 6.2 Table-2 i(Nitrate (as NO3)) |
- |
231 |
|
Not Applicable |
| 6.2 Table-2 ii(Nitrite (as NO2)) |
- |
231 |
|
Not Applicable |
| 6.2 Table-2 vii(Flouride (as F)) |
- |
231 |
|
Not Applicable |
| 6.2 Table-2 vi(Zinc (as Zn)) |
- |
231 |
|
Not Applicable |
| 6.2 Table-2 xi(Silver (as Ag)) |
- |
231 |
|
Not Applicable |
| 6.2 Table-2 xii(Chloride (as Cl)) |
- |
231 |
|
Not Applicable |
| 6.2 Table-2 xviii(Selenium (as Se)) |
- |
231 |
|
Not Applicable |
| 6.2 Table-2 xiii(Sulphate (as SO4),) |
- |
231 |
|
Not Applicable |
| 6.2 Table-2 xvii(Alkalinity (as HCO3)) |
- |
231 |
|
Not Applicable |
| 6.2 Table-2 xv(Calcium (as Ca)) |
- |
231 |
|
Not Applicable |
| 6.2 Table-2 xiv(Magnesium (as Mg)) |
- |
231 |
|
Not Applicable |
| 6.2 Table-2 xvi(Sodium (as Na)) |
- |
231 |
|
Not Applicable |
| 6.2 Table-2 xx(Phenolic compounds (as C6H5OH)) |
- |
231 |
|
Not Applicable |
| 6.2 Table-2 xix(Mineral Oil) |
- |
231 |
|
Not Applicable |
| 6.2 Table-2 xxi(Anionic surface active agents (as MBAS)) |
- |
231 |
|
Not Applicable |
| 6.2 Table-2 iii(Sulphide (as H2S)) |
- |
231 |
|
Not Applicable |
| 6.2 Table-2 ix(Antimony (as Sb)) |
- |
231 |
|
Not Applicable |
| 6.2 Table-2 x(Borates (as B)) |
- |
231 |
|
Not Applicable |
| 6.2 Table-3 v(Mercury (as Hg)) |
- |
231 |
|
Not Applicable |
| 6.2 Table-3 ii(Cadmium (as Cd)) |
- |
231 |
|
Not Applicable |
| 6.2 Table-3 i(Arsenic (as As)) |
- |
231 |
|
Not Applicable |
| 6.2 Table-3 iii(Cyanide (as CN)) |
- |
231 |
|
Not Applicable |
| 6.2 Table-3 vi(Lead (as Pb) |
- |
231 |
|
Not Applicable |
| 6.2 Table-3 iv(Chromium (as Cr)) |
- |
231 |
|
Not Applicable |
| 6.2 Table-3 vii(Nickel (as Ni)) |
- |
231 |
|
Not Applicable |
| 6.2 Table-3 viii(Polychlorinated biphenyle (PCB)) |
- |
231 |
|
Not Applicable |
| 6.2 Table-3 ix(Polynuclear aromatic hydrocarbons) |
- |
231 |
|
Not Applicable |
| 6.3(o,p DDT) |
- |
183 |
|
Not Applicable |
| 6.3(p,p DDT) |
- |
183 |
|
Not Applicable |
| 6.3(o,p DDE) |
- |
183 |
|
Not Applicable |
| 6.3(p, DDE) |
- |
183 |
|
Not Applicable |
| 6.3(o,p DDD) |
- |
183 |
|
Not Applicable |
| 6.3(p,p DDD) |
- |
183 |
|
Not Applicable |
| 6.3(γ-HCH (Lindane)) |
- |
183 |
|
Not Applicable |
| 6.3(α-HCH) |
- |
183 |
|
Not Applicable |
| 6.3(β-HCH) |
- |
183 |
|
Not Applicable |
| 6.3(δ-HCH) |
- |
183 |
|
Not Applicable |
| 6.3(α Endosulfan) |
- |
183 |
|
Not Applicable |
| 6.3(β Endosulfan) |
- |
183 |
|
Not Applicable |
| 6.3(Endosulfan Sulphate) |
- |
183 |
|
Not Applicable |
| 6.3(Monocrotophos) |
- |
183 |
|
Not Applicable |
| 6.3(Ethion) |
- |
183 |
|
Not Applicable |
| 6.3(Chlorpyrifos) |
- |
183 |
|
Not Applicable |
| 6.3(Phorate) |
- |
183 |
|
Not Applicable |
| 6.3(Phorate sulphoxide) |
- |
183 |
|
Not Applicable |
| 6.3(phorate sulphone) |
- |
183 |
|
Not Applicable |
| 6.3(2,4-D) |
- |
183 |
|
Not Applicable |
| 6.3(Butachlor) |
- |
183 |
|
Not Applicable |
| 6.3(Isoproturon) |
- |
183 |
|
Not Applicable |
| 6.3(Alachlor) |
- |
183 |
|
Not Applicable |
| 6.3(Atrazine) |
- |
183 |
|
Not Applicable |
| 6.3(Methyl Parathion) |
- |
183 |
|
Not Applicable |
| 6.3(Methyl Paraoxon) |
- |
183 |
|
Not Applicable |
| 6.3(Malathion) |
- |
183 |
|
Not Applicable |
| 6.3(Aldrin) |
- |
183 |
|
Not Applicable |
| 6.3(Dieldrin) |
- |
183 |
|
Not Applicable |
| Table 3, x)(Uranium) |
- |
231 |
|
Not Applicable |
|
Complete
|
|
21 Apr, 2028 |
-
URANIUM PARAMETER INCLUDING W.E.F. 18-05-2022. Excluding following tests:
Radio-active residues (cl.6.2, Table 4) |
| 8042 |
Shiva Analyticals (India) Private Limited
| IS 4467 (1996) |
Caramel - Specification (Second Revision) |
- |
-
|
6600 View breakup
Type 1 – Rs. 6,600/-
Type 2 – Rs. 7,500/-
Type 3 – Rs. 9,600/-
Type 4 – Rs. 9,300/-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6.1.2 Table 1(Ammoniacal Nitrogen, Type 1 plain) |
- |
600 |
|
- |
| 6.1.2 Table 1(Colour Intensity, Type 1 plain) |
- |
600 |
|
- |
| 6.2.1 Table 2(Sulphur dioxide, Type 2 Caustic sulphite) |
- |
600 |
|
- |
| 6.2.1 Table 2(Total Sulphur,Type 1 plain) |
- |
600 |
|
- |
| 6.2.1 Table 2(Total Nitrogen, Type 1 plain) |
- |
600 |
|
- |
| 6.2.1 Table 2(Mercury, all types) |
- |
600 |
|
- |
| 6.1.2 Table 1(Arsenic, all types) |
- |
600 |
|
- |
| 6.1.2 Table 1(Lead ( as Pb), all types) |
- |
600 |
|
- |
| 6.2.1 Table 2(Copper,all types) |
- |
600 |
|
- |
| 6.1.2 Table 1(solid Content, Type 1 plain) |
- |
600 |
|
- |
| 6.2.1 Table 2(Heavy Metals, all types) |
- |
600 |
|
- |
|
Complete
|
|
21 Apr, 2028 |
-
- |
| 8043 |
NSIC - Technical Services Centre
| IS 8472 (2019) |
Centrifugal regenerative pumps for clear, cold water - Specification (Second Revision) |
- |
-
|
9500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 16.1(Marking) |
- |
100 |
|
- |
| 16.1(Marking) |
- |
100 |
|
- |
| 16.1(Marking) |
- |
100 |
|
- |
| 16.1(Marking) |
- |
100 |
|
- |
| 16.1(Marking) |
- |
100 |
|
- |
| 16.1(Marking) |
- |
100 |
|
- |
| 16.1(Marking) |
- |
100 |
|
- |
| 16.1(Marking) |
- |
100 |
|
- |
| 16.1(Marking) |
- |
100 |
|
- |
| 16.1(Marking) |
- |
100 |
|
- |
| 16.1(Marking) |
- |
100 |
|
- |
| 16.1(Marking) |
- |
100 |
|
- |
| 16.1(Marking) |
- |
100 |
|
- |
| 16.1(Marking) |
- |
100 |
|
- |
| 16.1(Marking) |
- |
100 |
|
- |
| 16.1(Marking) |
- |
100 |
|
- |
| 16.1(Marking) |
- |
100 |
|
- |
| 16.1(Marking) |
- |
100 |
|
- |
| 16.1(Marking) |
- |
100 |
|
- |
| 16.1(Marking) |
- |
100 |
|
- |
| 12.1(Pump Tests
Cl.8 of IS 11346-2002
Rate of flow and head
Cl.8 of IS 11346-2002) |
- |
100 |
|
- |
| 12.1(Pump Tests
Cl.8 of IS 11346-2002
Rate of flow and head
Cl.8 of IS 11346-2002) |
- |
100 |
|
- |
| 12.1(Pump Tests
Cl.8 of IS 11346-2002
Efficiency
Cl.8.3 of IS 11346-2002) |
- |
100 |
|
- |
| 12.3.1(Hydrostatic Pressure Test) |
- |
100 |
|
- |
| 12.4(Pump tests) |
- |
1000 |
|
- |
| 12.5(Self-Priming Test for Self-Priming Pumps) |
- |
100 |
|
- |
| 15.2(Guarantee of Performance) |
- |
100 |
|
- |
| 13.1.2(No Load Test at Rated Voltage) |
- |
100 |
|
- |
| 13.1.2.1.1(Temperature Rise Test at Rated Voltage) |
- |
100 |
|
- |
| 13.1.2.1.2(Temperature Rise Test at Reduced Voltage) |
- |
100 |
|
- |
| 13.1.2(Break away torque Pull up torque) |
- |
100 |
|
- |
| 13.1.2(High Voltage test) |
- |
100 |
|
- |
| 13.1.2(Insulation Resistance) |
- |
100 |
|
- |
| 8(Direction of Rotation) |
- |
100 |
|
- |
| 7(Material of Constructional) |
- |
100 |
|
- |
| 11.1(General Requirements) |
- |
100 |
|
- |
| 13.1.2(Measurement of stator resistance) |
- |
100 |
|
- |
| 13.1.2(Locked rotor test(cl.6.2(d) of IS 14582)) |
- |
100 |
|
- |
| 7(Materials of Construction ( Casing/Chamber)) |
- |
100 |
|
- |
| 7(Materials of Construction ( Impeller)) |
- |
100 |
|
- |
| 7(Materials of Construction ( Shaft)) |
- |
100 |
|
- |
| 8.1, 8.2(The direction of rotation of pumps) |
- |
100 |
|
- |
| 8.3(The direction of inlet and outlet flow passages) |
- |
100 |
|
- |
| 10.1(a)(Design Features(Voltage Rangings)) |
- |
100 |
|
- |
| 10.1(b)(Design Features(Frequency Rangings)) |
- |
100 |
|
- |
| 10.1(c)(Design Features(Combination of Voltage and frequency variation)) |
- |
100 |
|
- |
| 11.1(The pump shaft should be of adequate size to transmit the required power over the entire head range.) |
- |
100 |
|
- |
| 11.2(The pump casing should be of robust construction and shall be tested to withstand hydrostatic pressure as specified in 12.3.) |
- |
100 |
|
- |
| 13.2(Three phase monoset pumps) |
- |
100 |
|
- |
| 13.2.2(Measurement of stator resistance test (cl.22.3.1(b) of IS 7538)) |
- |
100 |
|
- |
| 13.2.2(Reduced voltage running test (cl.22.3.1(d) of IS 7538)) |
- |
100 |
|
- |
| 13.2.2(Locked Rotor test (cl.22.3.1(e) of IS 7538)) |
- |
100 |
|
- |
| 13.2.2(Insulation Resistance test (cl.22.3.1(m) of IS 7538)) |
- |
100 |
|
- |
| 13.2.2(High Voltage test (cl.22.3.1(n) of IS 7538)) |
- |
100 |
|
- |
| 15.2.1(a)(Discharge, total head, current and input power at the Guarnteed duty point) |
- |
100 |
|
- |
| 15.2.1(b)(Non overloading of the prime-mover I the declared operating head range) |
- |
100 |
|
- |
| 15.2.1(c)(Rated output of motor) |
- |
100 |
|
- |
| 15.2.1(d)(Full load speed of motor) |
- |
100 |
|
- |
| 15.2.2(Bare pumps) |
- |
100 |
|
- |
| 15.2.1(e)(Overall efficiency of pumpset) |
- |
100 |
|
- |
| 15.2.1(f)(Max.self.priming time) |
- |
100 |
|
- |
| 15.2.2(a)(Discharge, total head as per Guarnteed duty point at rated voltage and speed) |
- |
100 |
|
- |
| 15.2.2(b)(Non overloading of the prime-mover I the declared operating head range) |
- |
100 |
|
- |
| 15.2.2(c)(Non-over-rated prime mover recommended by the manufacturer) |
- |
100 |
|
- |
| 15.2.2(d)(Max.self.priming time) |
- |
100 |
|
- |
|
Complete
|
|
14 Jun, 2025 |
-
REVISED VERSION OF IS 8472:2019 INCLUDED W.E.F. 29-09-2021 |
| 8044 |
NSIC - Technical Services Centre
| IS 4985 (2021) |
UNPLASTICIZED PVC PIPES FOR POTABLE WATER SUPPLIES SPECIFICATION Fourth Revision |
- |
-
|
21200 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7(DIMENSIONS-PIPE-Nominal Diameter) |
- |
590 |
|
- |
| 7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Minimum)) |
- |
590 |
|
- |
| 7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Mamimum)) |
- |
590 |
|
- |
| 7.1.1.1(DIMENSIONS-PIPE-Mean O.D. Variation) |
- |
590 |
|
- |
| 7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Minimum)) |
- |
590 |
|
- |
| 7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Maximum)) |
- |
590 |
|
- |
| 7.1.1.2(DIMENSIONS-PIPE-Ovality (Maximum)) |
- |
590 |
|
- |
| 7.1.2.1(DIMENSIONS-PIPE-Thickness(Minimum)) |
- |
590 |
|
- |
| 7.1.2.1(DIMENSIONS-PIPE-Thickness(Maximum)) |
- |
590 |
|
- |
| 7.1.2.1(DIMENSIONS-PIPE-Average Thickness) |
- |
590 |
|
- |
| 7.2.1(DIMENSIONS-Socket) |
- |
590 |
|
- |
| 7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Minimum Length) |
- |
590 |
|
- |
| 7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Minimum)) |
- |
590 |
|
- |
| 7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Maximum)) |
- |
590 |
|
- |
| 10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity) |
- |
708 |
|
- |
| 10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test) |
- |
708 |
|
- |
| 10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature) |
- |
1180 |
|
- |
| 10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density) |
- |
531 |
|
- |
| 11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)) |
- |
10856 |
|
- |
| 11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)) |
- |
944 |
|
- |
| 11.1.1(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Plumbing pipes) |
- |
944 |
|
- |
| 11.2(Resistance to External Blows at 0°C) |
- |
1121 |
|
- |
| 10.3(Effect on Water Test) |
- |
2950 |
|
- |
| 6.1.2(PVC Resin) |
- |
4071 |
|
- |
| 10.7(Sulphated Ash Content) |
- |
1062 |
|
- |
|
Complete
|
|
14 Jun, 2025 |
-
REVISED VERSION OF IS 4985:2021 INCLUDED W.E.F. 29-09-2021. Upto 400 mm |
| 8045 |
NSIC - Technical Services Centre
| IS 4985 (2000) |
Unplasticized pvc pipes for potable water supplies - Specification (Third Revision) |
- |
-
|
23954 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Mamimum)) |
- |
590 |
|
Including GST |
| 7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Minimum)) |
- |
590 |
|
Including GST |
| 7.1.1.1(DIMENSIONS-PIPE-Mean O.D. Variation) |
- |
590 |
|
Including GST |
| 7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Maximum)) |
- |
590 |
|
Including GST |
| 7.1.1.2(DIMENSIONS-PIPE-Ovality (Maximum)) |
- |
590 |
|
Including GST |
| 7.2.1(DIMENSIONS-Socket) |
- |
590 |
|
Including GST |
| 7.2.1(DIMENSIONS-Socket) |
- |
590 |
|
Including GST |
| 7.1.2.1(DIMENSIONS-PIPE-Average Thickness) |
- |
590 |
|
- |
| 7.1.2.1(DIMENSIONS-PIPE-Thickness(Maximum)) |
- |
590 |
|
- |
| 7.1.2.1(DIMENSIONS-PIPE-Thickness(Minimum)) |
- |
590 |
|
- |
| Clause 10.7(Sulphated Ash Content) |
- |
1062 |
|
- |
| 11.2(Resistance to External Blows at 0°C) |
- |
1121 |
|
- |
| 11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)) |
- |
944 |
|
- |
| 11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)) |
- |
10856 |
|
- |
| 10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density) |
- |
531 |
|
- |
| 10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature) |
- |
1180 |
|
- |
| 10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test) |
- |
708 |
|
- |
| 10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity) |
- |
708 |
|
- |
| 10.3(Effect on Water) |
- |
2950 |
|
- |
| 6.1.2(PVC Resin) |
- |
2950 |
|
- |
|
Complete
|
|
14 Jun, 2025 |
-
- |
| 8046 |
NSIC - Technical Services Centre
| IS 12818 (2010) |
Unplasticized polyvinyl chloride (Pvc - U) screen and casing pipes for bore/tubewells - Specification (Second Revision) |
- |
-
|
12100 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 9.6(Vicat Softening Temperature
IS 12235 (Part 2).) |
- |
1180 |
|
Including GST |
| 9.5(Tensile Strength
IS 12235(Part 13)) |
- |
1121 |
|
Including GST |
| 9.4 and Table 14(Resistance to External Blows at 0 ?C
IS 12235 (Part 9)) |
- |
1955 |
|
Including GST |
| 9.3(Density
IS 12235 (Part 14)) |
- |
531 |
|
Including GST |
| 9.2(Internal Diameter) |
- |
590 |
|
Including GST |
| 7.2 and Table 5, 6 & 7
Fig 1B(Wall thickness, Max) |
- |
1800 |
|
Including GST |
| 7.2 and Table 5, 6 & 7
Fig 1B(Wall thickness, Min) |
- |
1800 |
|
Including GST |
| 7.2 and Table 5, 6 & 7
Fig 1B(DIMENSIONS - Casing Pipes) |
- |
1800 |
|
Including GST |
|
Complete
|
|
14 Jun, 2025 |
-
- |
| 8047 |
NSIC - Technical Services Centre
| IS 13488 (2008) |
Irrigation equipment - Emitting pipe systems - Specification (First Revision) |
- |
-
|
11500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.1.2 (Ref. Cl 4.1.c & 4.2.a of IS 12786 : 1989)(Carbon Black content - IS 2530 : 1963) |
- |
944 |
|
Including GST |
| 5.1.2 (Ref. Cl 4.2.b of IS 12786 : 1989)(The dispersion of Carbon Black content shall be satisfactory - IS 2530 : 1963) |
- |
590 |
|
Including GST |
| 8.3.2(Inside Diameter ofEmitting Pipe) |
- |
295 |
|
Including GST |
| 8.3.1(Wall Thickness ofEmitting Pipe) |
- |
295 |
|
Including GST |
| 8.5(Resistance to Tension at Elevated Temperature) |
- |
1711 |
|
Including GST |
| 8.6(Resistance to Pull Out of Joints Between Fitting and Emitting
IS 13479) |
- |
590 |
|
- |
| 8.7.1(Resistance of PE Emitting Pipe to
Environmental Stress Cracking -Acceptance Test
Annex D of IS 12786) |
- |
590 |
|
- |
| 8.7.2(Resistance of PE Emitting Pipe to
Environmental Stress Cracking - Type Test
Annex D of IS 12786) |
- |
1888 |
|
- |
| 8.4.1(Resistance to Hydrostatic Pressure at Ambient Temperature) |
- |
1298 |
|
- |
| 8.4.2(Resistance to Hydrostatic Pressure at Elevated Temperature) |
- |
1711 |
|
- |
| 8.3.4(Spacing ofEmitter Units) |
- |
295 |
|
- |
| 8.1.2(Uniformity of Emission Rate for Unregulated Emitting Pipes) |
- |
1121 |
|
- |
| 8.2.1(Unregu/Qt~d Emining Pipe) |
- |
1121 |
|
- |
| 8.3.3(Flow Paths in Emitting Unit) |
- |
354 |
|
- |
| 8.8(Determination of Emitting Unit Exponent) |
- |
708 |
|
- |
| 8.2(Emission Rate of Emitting Unit as a Function of Inlet Pressure) |
- |
1121 |
|
- |
|
Complete
|
|
14 Jun, 2025 |
-
- |
| 8048 |
NSIC - Technical Services Centre
| IS 996 (2009) |
Single phase a.c. induction motors for general purpose (Third Revision) |
- |
-
|
12500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 16.1(Marking and Diagram of connenctions) |
- |
100 |
|
- |
| 16.1(Marking and Diagram of connenctions) |
- |
100 |
|
- |
| 16.1(Marking and Diagram of connenctions) |
- |
100 |
|
- |
| 16.1(Marking and Diagram of connenctions) |
- |
100 |
|
- |
| 16.1(Marking and Diagram of connenctions) |
- |
100 |
|
- |
| 16.1(Marking and Diagram of connenctions) |
- |
100 |
|
- |
| 16.1(Marking and Diagram of connenctions) |
- |
100 |
|
- |
| 16.1(Marking and Diagram of connenctions) |
- |
100 |
|
- |
| 16.1(Marking and Diagram of connenctions) |
- |
100 |
|
- |
| 16.1(Marking and Diagram of connenctions) |
- |
100 |
|
- |
| 16.1(Marking and Diagram of connenctions) |
- |
100 |
|
- |
| 16.1(Marking and Diagram of connenctions) |
- |
100 |
|
- |
| 16.1(Marking and Diagram of connenctions) |
- |
100 |
|
- |
| 16.1(Marking and Diagram of connenctions) |
- |
100 |
|
- |
| 16.1(Marking and Diagram of connenctions) |
- |
100 |
|
- |
| 16.1(Marking and Diagram of connenctions) |
- |
100 |
|
- |
| 16.1(Marking and Diagram of connenctions) |
- |
100 |
|
- |
| 10(Type of enclosures) |
- |
7500 |
|
- |
| 11(Methods of cooling) |
- |
100 |
|
- |
| 9.1(General construction (as per Cl. 9 & F-3)) |
- |
100 |
|
- |
| 9(General construction (as per Cl. 9 & F-3)) |
- |
100 |
|
- |
| 9.4.11(General construction (as per Cl. 9 & F-3)) |
- |
100 |
|
- |
| 9.4.13(General construction (as per Cl. 9 & F-3)) |
- |
100 |
|
- |
| 4.1(Rated Voltage) |
- |
100 |
|
- |
| 4.2(Rated Frequency) |
- |
100 |
|
- |
| 4.3(Rated Output) |
- |
100 |
|
- |
| 4.4(Rated Speed) |
- |
100 |
|
- |
| 7(Dimensions (Cl.App.F-4)) |
- |
1000 |
|
- |
| 9.5(Earthing) |
- |
100 |
|
- |
| 9.5(Earthing) |
- |
100 |
|
- |
| 9.5(Earthing) |
- |
100 |
|
- |
| 17.3 (a)(No load test at rated voltage and frequency ) |
- |
500 |
|
- |
| 12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 )) |
- |
2000 |
|
- |
| 12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 )) |
- |
5000 |
|
- |
| 12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5)) |
- |
2000 |
|
- |
| 12.7(Insulation resistance test) |
- |
250 |
|
- |
| 13.1(High voltage test) |
- |
250 |
|
- |
| 13.2(Moisture proofness) |
- |
1500 |
|
- |
| 13.3(Leakage current test) |
- |
250 |
|
- |
| 12.6(Vibration Severity) |
- |
250 |
|
- |
| 15.2(Specific Requirements) |
- |
100 |
|
- |
| 15.2(Specific Requirements) |
- |
100 |
|
- |
| 9.0(Observation) |
- |
100 |
|
- |
| 7.2(Dimensions) |
- |
100 |
|
- |
| 11.0(Observation) |
- |
100 |
|
- |
| 17.3 (j)(Observation) |
- |
100 |
|
- |
| 9.5(Observation) |
- |
100 |
|
- |
| 14.0(Observation) |
- |
100 |
|
- |
| 16.0(Observation) |
- |
100 |
|
- |
| 17.4 & 9.4.6.1(Observation) |
- |
100 |
|
- |
| 17.3 (k)(Current) |
- |
100 |
|
- |
| 17.3 (m)(Vibration) |
- |
100 |
|
- |
| 17.3 (g)(Insulation Resistance) |
- |
100 |
|
- |
| 17.3 (h)(Voltage) |
- |
100 |
|
- |
| 17.3 (b)(Temperature) |
- |
1000 |
|
- |
| 17.3 (e)(Temperature) |
- |
1000 |
|
- |
| 17.3 (f)(Torque) |
- |
1000 |
|
- |
| 17.3 (c)(Current, Torque) |
- |
100 |
|
- |
| 17.3 (d)(Voltage, Current, Power, Frequency, Speed, Efficiency, Power factor, Slip) |
- |
100 |
|
- |
| 17.3 (a)(Voltage, Current, Power, Frequency, Speed) |
- |
100 |
|
- |
| 15.4 (b)(Cold impact) |
- |
100 |
|
- |
| 9.1(PIPE ENDS) |
- |
100 |
|
- |
|
Complete
|
|
14 Jun, 2025 |
-
- |
| 8049 |
NSIC - Technical Services Centre
| IS 9283 (2013) |
Motors for submersible pumpsets - Specification (Second Revision) |
- |
-
|
28800 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.1(Construction, IS 9283) |
- |
500 |
|
- |
| 5.1.1(Construction, IS 9283) |
- |
500 |
|
- |
| 5.1.3(Construction, IS 9283) |
- |
500 |
|
- |
| 5.1.4(Construction, IS 9283) |
- |
500 |
|
- |
| 5.2.1(Earthing, IS 9283) |
- |
100 |
|
- |
| 5.2.2(Earthing, IS 9283) |
- |
100 |
|
- |
| 5.2.3(Earthing, IS 9283) |
- |
100 |
|
- |
| 5.2.4(Earthing, IS 9283) |
- |
100 |
|
- |
| 5.2.5(Earthing, IS 9283) |
- |
100 |
|
- |
| 5.3(Foreign Matter, IS 9283) |
- |
100 |
|
- |
| 5.5(Finish of Bearings, IS 9283) |
- |
100 |
|
- |
| 5.6(Balancing of Rotor, IS 9283) |
- |
500 |
|
- |
| 7.1(Dimensions of Motors, IS 9283) |
- |
500 |
|
- |
| 8(Type of duty, IS 9283) |
- |
100 |
|
- |
| 13(Terminal Markings, IS 9283) |
- |
100 |
|
- |
| 7.2.1(Tolerances, IS 9283) |
- |
100 |
|
- |
| 7.2.2(Tolerances, IS 9283) |
- |
100 |
|
- |
| 15.1(Marking, IS 9283) |
- |
100 |
|
- |
| 15.1(Marking, IS 9283) |
- |
100 |
|
- |
| 15.1(Marking, IS 9283) |
- |
100 |
|
- |
| 15.1(Marking, IS 9283) |
- |
100 |
|
- |
| 15.1(Marking, IS 9283) |
- |
100 |
|
- |
| 15.1(Marking, IS 9283) |
- |
100 |
|
- |
| 15.1(Marking, IS 9283) |
- |
100 |
|
- |
| 15.1(Marking, IS 9283) |
- |
100 |
|
- |
| 15.1(Marking, IS 9283) |
- |
100 |
|
- |
| 15.1(Marking, IS 9283) |
- |
100 |
|
- |
| 15.1(Marking, IS 9283) |
- |
100 |
|
- |
| 15.1(Marking, IS 9283) |
- |
100 |
|
- |
| 15.3(Marking, IS 9283) |
- |
100 |
|
- |
| 23(Leakage Current test, IS 9283) |
- |
200 |
|
- |
| 5.1.2(Construction, IS 9283) |
- |
500 |
|
- |
| 17.1(Performance values, IS 9283) |
- |
3000 |
|
- |
| 17.1(Performance values, IS 9283) |
- |
3000 |
|
- |
| 17.1(Performance values, IS 9283) |
- |
3000 |
|
- |
| 17.1(Performance values, IS 9283) |
- |
3000 |
|
- |
| 18.1(Overload test, IS 9283) |
- |
1500 |
|
- |
| 19(Temperature rise test, IS 9283) |
- |
3500 |
|
- |
| 19(Temperature rise test, IS 9283) |
- |
3500 |
|
- |
| 20(High Voltage test, IS 9283) |
- |
500 |
|
- |
| 21(Insulation Resistance test, IS 9283) |
- |
500 |
|
- |
| 22(Speed, IS 9283) |
- |
500 |
|
- |
| 15.4 (b)(Cold impact) |
- |
100 |
|
- |
| 9.1(PIPE ENDS) |
- |
100 |
|
- |
|
Complete
|
|
14 Jun, 2025 |
-
- |
| 8050 |
NSIC - Technical Services Centre
| IS 6595 : Part 1 (2018) |
Horizontal centrifugal pumps for clear, cold water - Specification: Part 1 agricultural and rural water supply purposes (Fourth Revision) |
- |
-
|
15840 View breakup
Rs.10,080/- upto 3.7 kW,
Rs.11,520/- above 3.7kW to 7.5kW,
Rs.12,960/- above 7.5kW to 11kW ,
Rs.14,400/- above 11kW to 15kW,
Rs.15840/-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 10.1(Pump Test
Verification of the Guarantee
Cl.9.4 of IS 9137:2019
Cl. 9.4.1 Curves QH and Qη) |
- |
1000 |
|
- |
| 10.1(Pump Test
Verification of the Guarantee
Cl.9.4 of IS 9137:2019
9.4.2 Efficiency) |
- |
1000 |
|
- |
| 10.1(Pump Test
Verification of the Guarantee
Cl.9.4 of IS 9137:2019
9.4.3 Pump Power Input) |
- |
1000 |
|
- |
| 8.1(Design Features
Head Restrictions) |
- |
1000 |
|
- |
| 8.1(Design Features
Head Restrictions) |
- |
1000 |
|
- |
| 8.2
As per fig 1 & 2(Design Features
Minimum efficiency
) |
- |
500 |
|
- |
| 8.3(Design Features
Shaft ) |
- |
500 |
|
- |
| 9.1(General Requirements
Volute Casing) |
- |
1000 |
|
- |
| 9.2(General Requirements
Impeller) |
- |
1000 |
|
- |
| 10(Pump Test
Verification of guarante
Cl.8 of IS 11346-2002
Rate of flow and head
Cl.8 of IS 11346-2002) |
- |
1000 |
|
- |
| 10(Pump Test
Verification of guarante
Cl.8 of IS 11346-2002
Rate of flow and head
Cl.8 of IS 11346-2002) |
- |
1000 |
|
- |
| 10(Pump Test
Verification of guarante
Cl.8 of IS 11346-2002
Efficiency
Cl.8.3 of IS 11346-2002) |
- |
1000 |
|
- |
| 12.2.2(Pump Power Input
) |
- |
1000 |
|
- |
| 12.2.5(Vibrations ) |
- |
1000 |
|
- |
| 12.2.5(Noise level) |
- |
1000 |
|
- |
| 15.4 (b)(Cold impact) |
- |
100 |
|
- |
| 9.1(PIPE ENDS) |
- |
100 |
|
- |
|
Complete
|
|
14 Jun, 2025 |
-
REVISED VERSION Included w.e.f.
05.02.2019. |
| 8051 |
NSIC - Technical Services Centre
| IS 8034 (2018) |
Submersible pumpsets - Specification (Third Revision) |
100 kW |
-
|
7200 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 14(Marking) |
- |
100 |
|
ok |
| 6.1 (a)(Constructional Features) |
- |
1000 |
|
ok |
| 14(Marking) |
- |
100 |
|
- |
| 14(Marking) |
- |
100 |
|
- |
| 14(Marking) |
- |
100 |
|
- |
| 14(Marking) |
- |
100 |
|
- |
| 14(Marking) |
- |
100 |
|
- |
| 14(Marking) |
- |
100 |
|
- |
| 14(Marking) |
- |
100 |
|
- |
| 14(Marking) |
- |
100 |
|
- |
| 14(Marking) |
- |
100 |
|
- |
| 14(Marking) |
- |
100 |
|
- |
| 14(Marking) |
- |
100 |
|
- |
| 14(Marking) |
- |
100 |
|
- |
| 14(Marking) |
- |
100 |
|
- |
| 14(Marking) |
- |
100 |
|
- |
| 14(Marking) |
- |
100 |
|
- |
| 14(Marking) |
- |
100 |
|
- |
| 6.1 (b)(Constructional Features) |
- |
100 |
|
- |
| 6.1 (c)(Constructional Features) |
- |
100 |
|
- |
| 6.1 (d)(Constructional Features) |
- |
100 |
|
- |
| 6.1 (e)(Constructional Features) |
- |
100 |
|
- |
| 6.1 (f)(Constructional Features) |
- |
100 |
|
- |
| 6.2 (g)(Material of construction Part Sub Assembly
Pump Shaft) |
- |
100 |
|
- |
| 6.2 (h)(Material of construction Part Sub Assembly
Suction Casing) |
- |
100 |
|
- |
| 6.2.2.1(Gaskets, Seals and Packings) |
- |
100 |
|
- |
| 6.2.2.2(Gaskets, Seals and Packings) |
- |
100 |
|
- |
| 6.2.3(Gaskets, Seals and Packings) |
- |
100 |
|
- |
| 6.2.4(Gaskets, Seals and Packings) |
- |
100 |
|
- |
| 6.2.5(Gaskets, Seals and Packings) |
- |
100 |
|
- |
| 7.1.1(Design features:
Typical design features 0f components of pump) |
- |
100 |
|
- |
| 7.1.2(Design features:
Typical design features 0f components of pump) |
- |
100 |
|
- |
| 7.1.3(Design features:
Typical design features 0f components of pump) |
- |
100 |
|
- |
| 7.1.4(Design features:
Typical design features 0f components of pump) |
- |
100 |
|
- |
| 7.1.5(Design features:
Typical design features 0f components of pump) |
- |
100 |
|
- |
| 7.1.6(Design features:
Typical design features 0f components of pump) |
- |
100 |
|
- |
| 8.1(General Requirements) |
- |
100 |
|
- |
| 8.2(Casing) |
- |
350 |
|
- |
| 8.3(Impeller) |
- |
350 |
|
- |
| 8.4.1(Shaft) |
- |
100 |
|
- |
| 8.4.2(Shaft) |
- |
100 |
|
- |
| 8.5.1(Balancing) |
- |
250 |
|
- |
| 8.5.2(Balancing) |
- |
250 |
|
- |
| 8.7.1(Direction of Rotation) |
- |
50 |
|
- |
| 8.7.2(Direction of Rotation) |
- |
50 |
|
- |
| 8.8(Terminal Marking) |
- |
100 |
|
- |
| 8.9.1(Typical Installation) |
- |
100 |
|
- |
| 8.9.3(Typical Installation) |
- |
100 |
|
- |
| 10.2(Laboratory Tests
Cl.8 of IS 11346-2002
Rate of flow and head
Cl.8 of IS 11346-2002) |
- |
600 |
|
- |
| 10.2(Laboratory Tests
Cl.8 of IS 11346-2002
Rate of flow and head
Cl.8 of IS 11346-2002) |
- |
600 |
|
- |
| 10.2(Laboratory Tests
Cl.8 of IS 11346-2002
Efficiency
Cl.8.3 of IS 11346-2002) |
- |
600 |
|
- |
| 10.3(Hydrostatic Pressure Test) |
- |
250 |
|
- |
| 11.1.1(Guarantee of Performance) |
- |
600 |
|
- |
| 11.1.2(Guarantee of Performance) |
- |
600 |
|
- |
| 11.1.3(Guarantee of Performance) |
- |
600 |
|
- |
| 11.1.4(Guarantee of Performance) |
- |
600 |
|
- |
| 11.1.5(Guarantee of Performance) |
- |
600 |
|
- |
| 12(Guarantee of workmanship and material) |
- |
600 |
|
- |
| 8.9(Typical installation) |
- |
100 |
|
- |
| 8.5(Balancing of rotor) |
- |
100 |
|
- |
| 8.6(Submersible cable) |
- |
100 |
|
- |
| 8.7(Direction of Rotation) |
- |
100 |
|
- |
| 7(Design features) |
- |
100 |
|
- |
| 7.1.10(Voltage & Frequency variation) |
- |
100 |
|
- |
| 6(Measurement of shaft extension) |
- |
100 |
|
- |
| 6(Constructional Features) |
- |
100 |
|
- |
| 11(Guarantee of Performance) |
- |
100 |
|
- |
| 10(Pump Performance test) |
- |
1000 |
|
- |
| 9.10 (a)(Insulation Resistance test) |
- |
100 |
|
- |
| 9.10 (b)(High Voltage test) |
- |
100 |
|
- |
| 9.10 (c)(Measurement of Stator Resistance) |
- |
100 |
|
- |
| 9.10 (d)(No Load Test at Rated Voltage) |
- |
100 |
|
- |
| 9.10 (e)(Reduced voltage Running up test) |
- |
100 |
|
- |
| 9.10 (f) & (g)(Locked Rotor Test) |
- |
100 |
|
- |
| 9.10 (h)(Leakage current test) |
- |
100 |
|
- |
| 9.10 (j)(Temperature Rise Test at Rated Voltage) |
- |
1000 |
|
- |
| 9.10 (k)(Temperature rise test at reduced voltage) |
- |
100 |
|
- |
| 8.9.4c(Earthing) |
- |
100 |
|
- |
| 7.1.7(Pump loading shall be as per 11.1.5) |
- |
100 |
|
- |
| 7.1.9(prime mover electric motor suitable for the pumps shall be of contineous duty as specified in IS/IEC 60034-4 and as per IS 9283) |
- |
100 |
|
- |
| 8.6.1(Flat/Round cables as per IS694 shall be used) |
- |
100 |
|
- |
| 8.6.2(The size of the conductor shall be adequate and suitable for contineous use under water and in air.
the length of the cable shall be minimum 2 m externallly unless otherwise specified by the customer) |
- |
100 |
|
- |
| 8.6.3(The size and of the cable should be suitably selected so that the voltage drop between control panel and the mptor terminal does not
exeed three percent of the rated voltage) |
- |
100 |
|
- |
| 8.6.4(In case a joint is required to be made between the lead cable supplied with the motor and the user’s cable, a detailed procedure to
make water tight joining shall be supplied by the motor manufacturer.) |
- |
100 |
|
- |
| 8.9(Installation) |
- |
100 |
|
- |
| 8.9.2(The pumpset shall be installed as per guidelines laid down in IS 14536 or as per the recommendation of the manufacturer) |
- |
100 |
|
- |
| 8.9.4.1(Earthing of the motor shall be done as per IS 9283 in accordance with the relevant provisions of IS 3043.) |
- |
100 |
|
- |
| 8.9.4.2(In case of PVC pipes used as discharge pipe, a separate non corrosive, low resistance conductor from motor earth terminal to control
panel earth terminal shall be provided for earthing.) |
- |
100 |
|
- |
| 8.9.4.3(In case non corrosive GI pipes and clamps are used for the purpose of earthing the motor, earthing connection may be made to
the discharge pipe clamp and to the control panel earth terminal) |
- |
100 |
|
- |
| 15.4 (b)(Cold impact) |
- |
100 |
|
- |
| 9.1(PIPE ENDS) |
- |
100 |
|
- |
|
Complete
|
|
14 Jun, 2025 |
-
RevISED VERSION Included w.e.f.
05.02.2019. |
| 8052 |
NSIC - Technical Services Centre
| IS 9079 (2018) |
Monoset pumps for clear, cold water for agricultural and water supply purposes - Specification (Third Revision) |
- |
-
|
11250 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 10.1(GENERAL REQUIREMENTS
Casing) |
- |
500 |
|
- |
| 7.1(DIRECTION OF ROTATION (Cl 7)) |
- |
100 |
|
- |
| 9.2(DESIGN
FEATURES (Cl 9)) |
- |
100 |
|
- |
| 10.2(GENERAL REQUIREMENTS
Impeller) |
- |
250 |
|
- |
| 10.3(GENERAL REQUIREMENTS
Shaft) |
- |
100 |
|
- |
| 7.2(DIRECTION OF ROTATION (Cl 7)) |
- |
100 |
|
- |
| 9.1(DESIGN
FEATURES (Cl 9)) |
- |
100 |
|
- |
| 13.1(Guarantee and tolerances on Pump Performance (Cl 13)) |
- |
2500 |
|
- |
| 13.2(Guarantee and tolerances on Pump Performance (Cl 13)) |
- |
2500 |
|
- |
| 8.2 IS 11346 : 2002(Verification of Guarantee
Rate of flow and head
(Cl.8.2 IS 11346 : 2002)) |
- |
2500 |
|
- |
| 13.1.1 (8.2 of IS 11346 : 2002)(Verification of Guarantee
Rate of flow and head
(Cl.8.2 IS 11346 : 2002)) |
- |
2500 |
|
- |
| 12.5(Efficiency) |
- |
2500 |
|
- |
| Cl.8.3 b IS 11346 : 2002(Overall efficiency) |
- |
2500 |
|
- |
| Cl13.2.3 IS 9079:2002(Current consumption) |
- |
1000 |
|
- |
| 9.1(DESIGN
FEATURES (Cl 9)) |
- |
250 |
|
- |
| 13.1(Guarantee and tolerances on Pump Performance (Cl 13)) |
- |
250 |
|
- |
| 13.2(Guarantee and tolerances on Pump Performance (Cl 13)) |
- |
250 |
|
- |
| 13.1.1 (8.2 of IS 11346 : 2002)(Verification of Guarantee
Rate of flow and head
(Cl.8.2 IS 11346 : 2002)) |
- |
250 |
|
- |
| 8.2 IS 11346 : 2002(Verification of Guarantee
Rate of flow and head
(Cl.8.2 IS 11346 : 2002)) |
- |
250 |
|
- |
| 12.5(Efficiency) |
- |
1500 |
|
- |
| Cl.8.3 b IS 11346 : 2002(Overall efficiency) |
- |
1500 |
|
- |
| 7(Contructional Features) |
- |
100 |
|
- |
| 7.1(Material of Construction) |
- |
100 |
|
- |
| 7.2(Gaskets.Seals and packings) |
- |
100 |
|
- |
| 9(Design Features) |
- |
100 |
|
- |
| 9.1.1(The pump may be equipped with replaceable bearing and wearing ring, wherever provided.) |
- |
100 |
|
- |
| 9.1.2(The pump shall be capable to perform as per guaranteed duty point at the manometric suction lift as specified in Table 1.) |
- |
100 |
|
- |
| 9.3(The manufacturer shall have a system of controlling dimensional accuracy within a scheme of fits and tolerance limits.
The system shall help interchangeability and fitment at site for replacement spares during subsequent repair and maintenance.) |
- |
100 |
|
- |
| 9.4(The pump efficiency of monoset pumps at duty point as declared by the manufacturer for 2 and 4 poles shall not be less than given in
Fig. 3 to Fig. 6 and beyond this range, the efficiency shall be declared by manufacturer.) |
- |
100 |
|
- |
| 10(General Requirements) |
- |
100 |
|
- |
| 10.1(General Requirements(Casing)) |
- |
100 |
|
- |
| 10.2(General Requirements(Impeller)) |
- |
100 |
|
- |
| 10.3(General Requirements(Shaft)) |
- |
100 |
|
- |
| 10.4.1, 10.4.2, 10.4.3, 10.4.4(General Requirements(Balancing)) |
- |
100 |
|
- |
| 10.5(Provision of Earthing) |
- |
100 |
|
- |
| 10.6.1(Terminal Marking) |
- |
100 |
|
- |
| 10.6.2, 10.6.3(Direction of Rotation) |
- |
100 |
|
- |
| 11.8.1(a)(Measurement of stator resistance) |
- |
100 |
|
- |
| 11.8.1(b)(High Voltage test) |
- |
100 |
|
- |
| 11.8.1(c)(Insulation Resistance test) |
- |
100 |
|
- |
| 11.8.1(d)(No load test at rated voltage) |
- |
100 |
|
- |
| 11.8.1(e)(Locked rotor) |
- |
100 |
|
- |
| 11.8.1(f)(Breakaway (starting) torque) |
- |
100 |
|
- |
| 11.8.1(g)(Reduced voltage running up test at no load) |
- |
100 |
|
- |
| 11.8.1(h)(Temperature rise test at rated voltage) |
- |
100 |
|
- |
| 11.8.1(j)(Temperature rise test at reduced voltage) |
- |
100 |
|
- |
| 13.1.1(The pumpset shall be guaranteed for their performance of the nominal volume rate of flow and the nominal head at the guaranteed
duty point. The overall efficiency of the pumpset shall be guaranteed at the declared duty point only.) |
- |
100 |
|
- |
| 13.1.2(The guarantee shall be deemed to have been met with, if the measured values of head, volume rate of flow and overall efficiency
are within the limits indicated in clause 8 of IS 11346. However, after applying the tolerance, overall efficiency value shall not be
less than that derived from Fig. 3 to 6.) |
- |
100 |
|
- |
| 13.1.3(Monoset motor shall not get overloaded in the specified operating head range at rated voltage and supply frequency.) |
- |
100 |
|
- |
| 13.1.4(The tolerance shall apply to guaranteed duty point only.) |
- |
100 |
|
- |
| 8.6.5(If four core cable is used, the fourth core is to be used for earthing.) |
- |
100 |
|
- |
| 15.4 (b)(Cold impact) |
- |
100 |
|
- |
| 9.1(PIPE ENDS) |
- |
100 |
|
- |
| 15.1(Marking) |
- |
- |
|
- |
| 15.1(Marking) |
- |
- |
|
- |
| 15.1(Marking) |
- |
- |
|
- |
| 15.1(Marking) |
- |
- |
|
- |
| 15.1(Marking) |
- |
- |
|
- |
| 15.1(Marking) |
- |
- |
|
- |
| 15.1(Marking) |
- |
- |
|
- |
| 15.1(Marking) |
- |
- |
|
- |
| 15.1(Marking) |
- |
- |
|
- |
| 15.1(Marking) |
- |
- |
|
- |
| 15.1(Marking) |
- |
- |
|
- |
| 15.1(Marking) |
- |
- |
|
- |
| 15.1(Marking) |
- |
- |
|
- |
| 15.1(Marking) |
- |
- |
|
- |
| 15.1(Marking) |
- |
- |
|
- |
| 15.1(Marking) |
- |
- |
|
- |
| 15.1(Marking) |
- |
- |
|
- |
| 15.1(Hydrostatic Pressure Test) |
- |
- |
|
- |
| 13.5(Minimum Current Requirement) |
- |
- |
|
- |
|
Complete
|
|
14 Jun, 2025 |
-
REVISED VERSION Included w.e.f.
05.02.2019. |
| 8053 |
NSIC - Technical Services Centre
| IS 12615 (2018) |
Line operated three phase AC motors (IE Code) "Efficiency classes and performance specification" (Third Revision) |
Type Test up to 5.5 KW 9198 (0.12 kW to 30 kW) REVISED |
-
|
30120 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 15.3.2(Marking) |
- |
100 |
|
Type Test up to 5.5 KW 9198 (0.12 kW to 30 kW) REVISED
T ype Test Above 5.5 KW to 11 KW 11472 VERSION Included w.e.f. 05.02.2019. |
| 15.2(Rating) |
- |
100 |
|
T ype Test Above 11 KW to 22 KW 20832
T ype Test Above 22 KW to 30 KW 30120
Optional Test (IP Test) 12000 Upto IP 44 |
| 18.3(BIS Certification Marking
) |
- |
100 |
|
- |
| 8.0(Earthing) |
- |
100 |
|
- |
| 9.0(Terminal Marking) |
- |
100 |
|
- |
| 11.0(DUTY AND RATING) |
- |
100 |
|
- |
| 18.3(Marking) |
- |
100 |
|
- |
| 16.2.1(Dimensions) |
- |
2000 |
|
- |
| 16.1.1(Insulation Resistance Test) |
- |
1000 |
|
- |
| 16.1.2(Measurement of Resistance of Windings of Stator) |
- |
1000 |
|
- |
| 16.1.3(No Load Test) |
- |
1000 |
|
- |
| 16.1.4(Locked Rotor Readings of Voltage, Current and Power Input at a Suitable Reduced Voltage) |
- |
1000 |
|
- |
| 16.1.5(5 Reduced Voltage Running up Test at no-load (for squirrel cage motor up to 37 kW only)) |
- |
1000 |
|
- |
| 16.1.6(High Voltage Test) |
- |
1000 |
|
- |
| 16.2.2(Locked Rotor Test) |
- |
1000 |
|
- |
| 16.2.2.1(Locked Rotor Test) |
- |
1000 |
|
- |
| 16.2.2.2(Locked Rotor Test) |
- |
1000 |
|
- |
| 16.2.2.2.1(Locked Rotor Test) |
- |
1000 |
|
- |
| 16.2.2.3(Determination of starting characteristics
-locked rotor current) |
- |
1000 |
|
- |
| 16.2.2.3.1(Direct proportion method) |
- |
1000 |
|
- |
| 16.2.3(Full Load Test to Determine Efficiency, Power Factor and Slip) |
- |
6500 |
|
- |
| 16.2.4(Temperature Rise Test) |
- |
3000 |
|
- |
| 16.2.5(Momentary Overload Test) |
- |
800 |
|
- |
| 16.3.1( Test for Vibration Severity of Motor) |
- |
500 |
|
- |
| 16.3.3( Test for Degree of Protection by Enclosure) |
- |
6500 |
|
- |
| 12.2(Pull up torque) |
- |
100 |
|
- |
| 6(Method of cooling) |
- |
100 |
|
- |
| 15.4 (b)(Cold impact) |
- |
100 |
|
- |
| 9.1(PIPE ENDS) |
- |
100 |
|
- |
|
Complete
|
|
14 Jun, 2025 |
-
REVISED VERSION Included w.e.f.
05.02.2019. |
| 8054 |
NSIC - Technical Services Centre
| IS 14220 (2018) |
Openwell submersible pumpsets - Specification (First Revision) |
- |
-
|
28800 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 8.1(Design Features) |
- |
200 |
|
ok |
| 10(Suction and Delivery Ends
(Cl 17.2 of IS 5120)) |
- |
200 |
|
ok |
| 9(Efficiency) |
- |
500 |
|
- |
| 8.1.1(Design Features) |
- |
500 |
|
- |
| 8.1.4(Design Features) |
- |
500 |
|
- |
| 8.1.5(Design Features) |
- |
100 |
|
- |
| 8.1.5(Design Features) |
- |
100 |
|
- |
| 10(Performance
(Cl 17.1 of IS 5120)) |
- |
2500 |
|
- |
| 10(Fluid Passages
(Cl 17.3 of IS 5120)) |
- |
100 |
|
- |
| 10(Draining Plugrs
(Cl 17.4 of IS 5120)) |
- |
100 |
|
- |
| 10(Lantern Ring
(Cl 17.5 of IS 5120)) |
- |
100 |
|
- |
| 10(Casing
(Cl 17.6 of IS 5120)) |
- |
1000 |
|
- |
| 10(Impeller
(Cl 17.7 of IS 5120)) |
- |
1000 |
|
- |
| 10(Shaft
(Cl 17.8 of IS 5120)) |
- |
200 |
|
- |
| 10(Shaft Couplings
(Cl 17.9 of IS 5120)) |
- |
100 |
|
- |
| 10(Bearings
(Cl 17.10 of IS 5120)) |
- |
100 |
|
- |
| 10(Bearings
(Cl 17.10.1 of IS 5120)) |
- |
100 |
|
- |
| 10(Bearings
(Cl 17.10.2 of IS 5120)) |
- |
100 |
|
- |
| 10( Stuffing Boxes
(Cl 17.11 of IS 5120)) |
- |
100 |
|
- |
| 10(Base Plates
(Cl 17.12 of IS 5120)) |
- |
100 |
|
- |
| 10(Prime Mover
(Cl 17.13 of IS 5120)) |
- |
100 |
|
- |
| 10(Name Plate
(Cl 17.14 of IS 5120)) |
- |
100 |
|
- |
| 10(Name Plate
(Cl 17.14 of IS 5120)) |
- |
100 |
|
- |
| 10(Name Plate
(Cl 17.14 of IS 5120)) |
- |
100 |
|
- |
| 10(Name Plate
(Cl 17.14.1 of IS 5120)) |
- |
100 |
|
- |
| 10.2(Casing) |
- |
1000 |
|
- |
| 10.3(Impeller) |
- |
1000 |
|
- |
| 10.4.1(Shaft) |
- |
100 |
|
- |
| 10.4.2(Shaft) |
- |
100 |
|
- |
| 10.5.1(Balancing) |
- |
1000 |
|
- |
| 10.5.2(Balancing) |
- |
1000 |
|
- |
| 10.5.3(Balancing) |
- |
100 |
|
- |
| 10.5.4(Balancing) |
- |
100 |
|
- |
| 10.6.1( Provision for Earthing) |
- |
100 |
|
- |
| 10.6.2( Provision for Earthing) |
- |
100 |
|
- |
| 10.6.3( Provision for Earthing) |
- |
100 |
|
- |
| 10.6.4( Provision for Earthing) |
- |
100 |
|
- |
| 10.7.1(Terminal Marking and Direction of Rotation) |
- |
100 |
|
- |
| 10.7.2(Terminal Marking and Direction of Rotation) |
- |
100 |
|
- |
| 10.7.3(Terminal Marking and Direction of Rotation) |
- |
100 |
|
- |
| 15.2(Laboratory Tests
Cl.8 of IS 11346-2002
Rate of flow and head
Cl.8 of IS 11346-2002) |
- |
1000 |
|
- |
| 15.2(Laboratory Tests
Cl.8 of IS 11346-2002
Efficiency
Cl.8.3 of IS 11346-2002) |
- |
1000 |
|
- |
| 15.5(Hydrostatic Pressure Test) |
- |
1000 |
|
- |
| 16.1.1( Guarantee of Performance) |
- |
1000 |
|
- |
| 16.1.2( Guarantee of Performance) |
- |
1000 |
|
- |
| 16.1.3( Guarantee of Performance) |
- |
1000 |
|
- |
| 16.1.4( Guarantee of Performance) |
- |
1000 |
|
- |
| 16.1.5( Guarantee of Performance) |
- |
1000 |
|
- |
| 18.1.3(Marking) |
- |
100 |
|
- |
| 18.1(Marking) |
- |
100 |
|
- |
| 18.1(Marking) |
- |
100 |
|
- |
| 18.1(Marking) |
- |
100 |
|
- |
| 18.1(Marking) |
- |
100 |
|
- |
| 18.1(Marking) |
- |
100 |
|
- |
| 18.1(Marking) |
- |
100 |
|
- |
| 18.1(Marking) |
- |
100 |
|
- |
| 18.1(Marking) |
- |
100 |
|
- |
| 18.1(Marking) |
- |
100 |
|
- |
| 18.1(Marking) |
- |
100 |
|
- |
| 18.1(Marking) |
- |
100 |
|
- |
| 18.1(Marking) |
- |
100 |
|
- |
| 18.1(Marking) |
- |
100 |
|
- |
| 18.1(Marking) |
- |
100 |
|
- |
| 18.1(Marking) |
- |
100 |
|
- |
| 18.1(Marking) |
- |
100 |
|
- |
| 18.1(Marking) |
- |
100 |
|
- |
| 18.1(Marking) |
- |
100 |
|
- |
| 18.1(Marking) |
- |
100 |
|
- |
| 7(Constructional features) |
- |
100 |
|
- |
| 7.1(It is recognized that a number of materials of construction are available to meet the needs for pumps handling clear, cold water.) |
- |
100 |
|
- |
| 7.2(Gaskets, seals and packings used for clear, cold water pumps shall conform to the applicable requirements specified in 5.2 of IS 5120.) |
- |
100 |
|
- |
| 7.3(The motor shall be provided with a breathing attachment like bellows, diaphragm etc; to compensate the volumetric variation of
water inside the motor due to change in the temperature.) |
- |
100 |
|
- |
| 7.4(The motor shall be protected from ingress of well water, sand and other foreign matter by means of cable glands, rubber seals etc.) |
- |
100 |
|
- |
| 7.5(All materials and components for the motor shall be suitable for application in respect of resistance and mechanical performance
to protect it) |
- |
100 |
|
- |
| 7.6(The rotor of the wet type open well submersible motor and rotor in water filled designed motor shall be provided with suitable coating
from corrosion under water. However if suitable anticorrosion additive is added in the water, no separate protection on
rotors is necessary.) |
- |
100 |
|
- |
| 8(Design Features) |
- |
100 |
|
- |
| 8.1.2(The multi-stage pump shaft may be guided through bearings, the bearings may be provided in stage casing, suction housing and
discharge casing, while in case of intermediate bearings, suitable positions may be selected in the overall span.) |
- |
100 |
|
- |
| 8.1.3(The pump may be equipped with replaceable bearing and wearing ring, wherever provided.) |
- |
100 |
|
- |
| 8.1.4(The strainer on the suction shall offer the best compromise amongst restraining large solids from entering the pump and containing
the suction losses to the minimum.) |
- |
100 |
|
- |
| 8.1.5(The pump shall be capable to give discharge without overloading the prime mover within the permissible current at rated voltage
and supply frequency at minimum +5 percent and minimum –15 percent of the guaranteed duty point head up to 30 m.
Above 30 m, the pump shall be capable to give discharge without overloading the prime mover within the permissible current at rated
voltage and supply frequency at minimum +10 percent and minimum –25 percent of the guaranteed duty point head.) |
- |
100 |
|
- |
| 12(Cable) |
- |
100 |
|
- |
| 12.1(Flat/Round cables as per IS694 shall be used) |
- |
100 |
|
- |
| 12.1.2(The size of the conductor shall be adequate and suitable for contineous use under water and in air.
the length of the cable shall be minimum 2 m externallly unless otherwise specified by the customer) |
- |
100 |
|
- |
| 12.1.3(The size and of the cable should be suitably selected so that the voltage drop between control panel and the mptor terminal does
not exeed three percent of the rated voltage) |
- |
100 |
|
- |
| 12.1.4(In case a joint is required to be made between the lead cable supplied with the motor and the user’s cable, a detailed procedure to
make water tight joining shall be supplied by the motor manufacturer.) |
- |
100 |
|
- |
| 12.1.5(If four core cable is used, the fourth core is to be used for earthing.) |
- |
100 |
|
- |
| 14.10.1(a)(Insulation Resistance test) |
- |
100 |
|
- |
| 14.10.1(b)(High Voltage test) |
- |
100 |
|
- |
| 14.10.1(c)(Measurement of stator resistance) |
- |
100 |
|
- |
| 14.10.1(d)(No load test at rated voltage) |
- |
100 |
|
- |
| 14.10.1(e)(Reduced voltage running up test at no load) |
- |
100 |
|
- |
| 14.10.1(f)(Locked rotor) |
- |
100 |
|
- |
| 14.10.1(g)(Breakaway (starting) torque) |
- |
100 |
|
- |
| 14.10.1(h)(Leakage current test;) |
- |
100 |
|
- |
| 14.10.1(j)(Temperature rise test at rated voltage) |
- |
100 |
|
- |
| 14.10.1(k)(Temperature rise test at reduced voltage) |
- |
100 |
|
- |
| 16.1.1(The pumpset shall be guaranteed for their performance of the nominal volume rate of flow and the nominal head at the guaranteed
duty point. The overall efficiency of the pumpset shall be guaranteed at the declared duty point only.) |
- |
100 |
|
- |
| 16.1.2(The guarantee shall be deemed to have been met with, if the measured values of head, volume rate of flow and overall efficiency
are within the indicated in IS 11346 limits) |
- |
100 |
|
- |
| 16.1.3(Open well submersible motor shall not get overloaded in the specified operating head range at rated voltage and supply frequency.) |
- |
100 |
|
- |
| 16.1.4(The pump shall be tested for the operating head range as per 8.1.5.) |
- |
100 |
|
- |
| 16.1.5(The overloading of motor is that condition when maximum current drawn by the motor exceeds the limit of 1.07 times of the rated
motor current) |
- |
100 |
|
- |
| 16.1.6(The tolerance shall apply to guaranteed duty point only.) |
- |
100 |
|
- |
| 16.1.7(Performance at rated voltage and supply frequency is actual performance of the set. This is better than performance at rated speed,
since in the entire operating head range speed of motor is higher than rated speed, as motor is running in under loaded condition.) |
- |
100 |
|
- |
| 16.1.8(The manufacturer shall specify the minimum submergence of pump unit at duty point.) |
- |
100 |
|
- |
| 15.4 (b)(Cold impact) |
- |
100 |
|
- |
| 9.1(PIPE ENDS) |
- |
100 |
|
- |
|
Complete
|
|
14 Jun, 2025 |
-
REVISED VERSION Included w.e.f.
05.02.2019. |
| 8055 |
NSIC - Technical Services Centre
| IS 7347 (1974) |
Specification for performance of small size spark ignition engines |
- |
-
|
45000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl.No.10.1.1(ISI Certification Marking ) |
- |
1000 |
|
- |
| Cl.No.10.1(c)(Marking ) |
- |
1000 |
|
- |
| Cl.No.10.1(b)(Marking ) |
- |
1000 |
|
- |
| Cl.No.10.1(a)(Marking ) |
- |
1000 |
|
- |
| Cl.No.9.1(h)(Reassembly ,Starting test and no load test) |
- |
2500 |
|
- |
| Cl.No.9.1(g)(Strip Examination) |
- |
5000 |
|
- |
| Cl.No.9.1(f)(Rating test after endurance test) |
- |
5000 |
|
- |
| Cl.No.9.1(h)(Reassembly ,Starting test and no load test) |
- |
3000 |
|
- |
| Cl.No.9.1(e)(Endurance test) |
- |
25000 |
|
- |
| Cl.No.9.1(d)(Starting test) |
- |
2500 |
|
- |
| Cl. No.9.1(c)(No load and Low speed test) |
- |
2500 |
|
- |
| Cl.No.9.1(a), Cl.No.9.3.1(Governing test) |
- |
3000 |
|
- |
| Cl.No.9.1(a)(Rating test including Fuel consumption test) |
- |
3500 |
|
- |
| 15.4 (b)(Cold impact) |
- |
500 |
|
- |
| 9.1(PIPE ENDS) |
- |
500 |
|
- |
|
Complete
|
|
14 Jun, 2025 |
-
- |
| 8056 |
NSIC - Technical Services Centre
| IS 10001 (1981) |
Performance Requirements for Constant Speed Compression ignition (diesel) engines for general purposes (up to 20 kW) |
- |
-
|
105600 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl.No.8(Test Certificate) |
- |
105000 |
|
Extra Lube oil and Fuel as per Actual uses |
| Cl.No.7.1(ISI Certification Marking ) |
- |
1000 |
|
- |
| Cl.No.7(e)(Marking ) |
- |
1000 |
|
- |
| Cl.No.7(d)(Marking ) |
- |
1000 |
|
- |
| Cl.No.7(c)(Marking ) |
- |
1000 |
|
- |
| Cl.No.7(b)(Marking ) |
- |
1000 |
|
- |
| Cl.No.7(a)(Marking ) |
- |
1000 |
|
- |
| Cl.No.4.2(Specific Fuel Consumption) |
- |
5000 |
|
- |
| Cl.No.3.1(d), Cl.No.3.5.2(Governing test) |
- |
5000 |
|
- |
| Cl.No.3.1(a)(Dimensional Measurenment for wear.) |
- |
10000 |
|
- |
| Cl.No.3.5.5(Lubricating Oil Consumption test) |
- |
5000 |
|
- |
| Cl.No.3.1(e)(Endurance test) |
- |
60000 |
|
- |
| Cl.No.3.1(b)(Preliminary run test) |
- |
5000 |
|
- |
| 15.4 (b)(Cold impact) |
- |
500 |
|
- |
| 9.1(PIPE ENDS) |
- |
500 |
|
- |
|
Complete
|
|
14 Jun, 2025 |
-
- |
| 8057 |
NSIC - Technical Services Centre
| IS 10002 (1981) |
Specification for performance requirements for constant speed compression ignition (Diesel) engines for general purposes (Above 20 KW) |
- |
-
|
528000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl.No.8(Test Certificate) |
- |
10000 |
|
- |
| Cl.No.7.1(ISI Certification Marking ) |
- |
1000 |
|
- |
| Cl.No.7(e)(Marking ) |
- |
1000 |
|
- |
| Cl.No.7(d)(Marking ) |
- |
1000 |
|
- |
| Cl.No.7(c)(Marking ) |
- |
1000 |
|
- |
| Cl.No.7(b)(Marking ) |
- |
1000 |
|
- |
| Cl.No.7(a)(Marking ) |
- |
1000 |
|
- |
| Cl.No.4.2(Specific Fuel Consumption) |
- |
20000 |
|
- |
| Cl.No.3.1(f), (Governing test) |
- |
30000 |
|
- |
| Cl.No.3.1(a)(Dimensional Measurenment for wear.) |
- |
30000 |
|
- |
| Cl.No.3.5(Lubricating Oil Consumption test) |
- |
25000 |
|
- |
| Cl.No.3.1(e)(Endurance test) |
- |
325000 |
|
- |
| Cl.No.3.1(b)(Preliminary run test) |
- |
50000 |
|
- |
| 15.4 (b)(Cold impact) |
- |
500 |
|
- |
| 9.1(PIPE ENDS) |
- |
500 |
|
- |
|
Complete
|
|
14 Jun, 2025 |
-
- |
| 8058 |
NSIC - Technical Services Centre
| IS 11170 (1985) |
Specification for 1 performance requirements for constant speed compression ignition (Diesel) engines for agricultural purposes (Up To 20 KW) |
- |
-
|
105600 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7(Marking) |
- |
100 |
|
For Type Test up to 20kW |
| 8(Test Certificate) |
- |
2500 |
|
- |
| 3.1(a) Preparation for tests according to IS : 10000 (Part 5)-1980) |
- |
2500 |
|
- |
| 3.1(b) Preliminary run according to IS : 10000 (Part 5)-1980) |
- |
2500 |
|
- |
| 3.1(c) Initial performance test according to Section I of IS : 10000 (Part 8)-1980 ) |
- |
2500 |
|
- |
| 3.1(d) Endurance test according to Section 1 of IS : 10000 (Part 9)-1980 ) |
- |
86000 |
|
- |
| 3.1(e) Final performance test according to Section 1 or IS : 10000 (Part 8)-1980;) |
- |
3000 |
|
- |
| 3.1(f) Final inspection test according to IS : 10000 (Part 6)-1980 ) |
- |
3000 |
|
- |
| 3.1(g) Lubricating oil consumption according to IS : 10000 (Part 4)-1980.) |
- |
3000 |
|
- |
| 3.1(Type test) |
- |
5000 |
|
- |
| 3.1(e) Final performance test according to Section 1 or IS : 10000 (Part 8)-1980;) |
- |
3000 |
|
- |
| 3.1(f) Final inspection test according to IS : 10000 (Part 6)-1980 ) |
- |
3000 |
|
- |
| 3.1(g) Lubricating oil consumption according to IS : 10000 (Part 4)-1980.) |
- |
3000 |
|
- |
| 7(Marking) |
- |
100 |
|
- |
| 8(Test Certificate) |
- |
500 |
|
- |
| 3.1(Type test) |
- |
5000 |
|
- |
| 3.1(a) Preparation for tests according to IS : 10000 (Part 5)-1980) |
- |
1000 |
|
- |
| 3.1(b) Preliminary run according to IS : 10000 (Part 5)-1980) |
- |
250 |
|
- |
| 3.1(c) Initial performance test according to Section I of IS : 10000 (Part 8)-1980 ) |
- |
250 |
|
- |
| 3.1(d) Endurance test according to Section 1 of IS : 10000 (Part 9)-1980 ) |
- |
250 |
|
- |
| 3.1(e) Final performance test according to Section 1 or IS : 10000 (Part 8)-1980;) |
- |
250 |
|
- |
| 3.1(f) Final inspection test according to IS : 10000 (Part 6)-1980 ) |
- |
250 |
|
- |
| 3.1(g) Lubricating oil consumption according to IS : 10000 (Part 4)-1980.) |
- |
500 |
|
- |
| 15.4 (b)(Cold impact) |
- |
500 |
|
- |
| 9.1(PIPE ENDS) |
- |
500 |
|
- |
|
Complete
|
|
14 Jun, 2025 |
-
- |
| 8059 |
NSIC - Technical Services Centre
| IS 10805 (1986) |
Specification for foot - Valves, reflux valves or non - Return valves and bore valves to be used in suction lines of agricultural pumping systems (First Revision) |
- |
-
|
6300 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| (Cl. 2 Table 1)(Nominal Size) |
- |
500 |
|
- |
| (Cl. 2 Table 1)(Dimensions) |
- |
500 |
|
- |
| (Cl. 2 Table 1)(Dimensions) |
- |
500 |
|
- |
| (Cl. 2 Table 1)(Dimensions) |
- |
500 |
|
- |
| (Cl. 4)(Requirements) |
- |
500 |
|
- |
| (Cl. 4)(Requirements) |
- |
500 |
|
- |
| (Cl. 5)(Coating) |
- |
300 |
|
- |
| 6.1.1(Seat test) |
- |
1000 |
|
- |
| 6.1.2(Housing test) |
- |
1000 |
|
- |
| 6.2(K-Value Test for Foot-Valves and Bore Valves) |
- |
1000 |
|
- |
| 15.4 (b)(Cold impact) |
- |
100 |
|
- |
| 9.1(PIPE ENDS) |
- |
100 |
|
- |
|
Complete
|
|
14 Jun, 2025 |
-
- |
| 8060 |
NSIC - Technical Services Centre
| IS 11501 (1986) |
Specification for engine monoset pumps for clear, cold, fresh water for agricultural purposes |
- |
-
|
22680 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.1(Material of Construction) |
- |
100 |
|
- |
| 5.1(Gaskets, Seals and Packings) |
- |
100 |
|
- |
| 6.1(Direction of rotation) |
- |
100 |
|
- |
| 6.1(Direction of rotation) |
- |
100 |
|
- |
| 7(Suction Limitations) |
- |
100 |
|
- |
| 9.1(Design Features) |
- |
100 |
|
- |
| 9.1(Design Features) |
- |
100 |
|
- |
| 10.2(Casing) |
- |
1000 |
|
- |
| 10.3(Impeller) |
- |
1000 |
|
- |
| 10.4(Shaft) |
- |
1000 |
|
- |
| 11.1(Engine Testing) |
- |
1000 |
|
- |
| 11.2(Engine Testing) |
- |
1000 |
|
- |
| 11.3.2.1(Pump Testing) |
- |
1000 |
|
- |
| 11.3.2.2(Diesel Consumption) |
- |
1000 |
|
- |
| 11.3.2.3(Pump Testing) |
- |
1000 |
|
- |
| 11.4.2.1(Pump Testing) |
- |
1000 |
|
- |
| 11.4.2.1(Pump Testing) |
- |
1000 |
|
- |
| 11.4.2.2(Pump Testing) |
- |
1000 |
|
- |
| 11.4.2.5(Pump Testing) |
- |
1000 |
|
- |
| 14(MARKING) |
- |
1000 |
|
- |
| 14(MARKING) |
- |
1000 |
|
- |
| 14(MARKING) |
- |
100 |
|
- |
| 14(MARKING) |
- |
100 |
|
- |
| 14(MARKING) |
- |
100 |
|
- |
| 14(MARKING) |
- |
100 |
|
- |
| 14(MARKING) |
- |
100 |
|
- |
| 14(MARKING) |
- |
100 |
|
- |
| 14(MARKING) |
- |
100 |
|
- |
| 14(MARKING) |
- |
100 |
|
- |
| 15.4 (b)(Cold impact) |
- |
100 |
|
- |
| 9.1(PIPE ENDS) |
- |
100 |
|
- |
|
Complete
|
|
14 Jun, 2025 |
-
- |
| 8061 |
NSIC - Technical Services Centre
| IS 1710 (1989) |
Specification for pumps - Vertical turbine mixed and axial flow, for clear cold water (Second Revision) |
- |
-
|
12000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl. 10.1(Max. Power at operating Head Range) |
- |
1000 |
|
- |
| Cl. 16.2(Guarntee of Performance (Pump Efficiency)) |
- |
1000 |
|
- |
| Cl. 16.2(Guarntee of Performance (Power)) |
- |
1000 |
|
- |
| Cl. 16.2(Guarntee of Performance (Discharge)) |
- |
1000 |
|
- |
| Cl. 16.2(Guarntee of Performance (Head)) |
- |
1000 |
|
- |
| Cl. 14.1(Pump Performance Test) |
- |
1000 |
|
- |
| Cl. 10.1(Design of Pump) |
- |
1000 |
|
- |
| Cl. 9.2.5.3(Line Shaft) |
- |
100 |
|
- |
| Cl. 9.2.3.3(Discharge case) |
- |
100 |
|
- |
| Cl. 9.2.3.2(Bowl) |
- |
100 |
|
- |
| Cl. 9.2.3.1(Bowl) |
- |
100 |
|
- |
| Cl. 9.2.2(Impeller) |
- |
100 |
|
- |
| Cl. 9.1.5.4(Thrust Bearing) |
- |
100 |
|
- |
| Cl. 9.1.5.3(Operating Speed) |
- |
100 |
|
- |
| Cl. 9.1.5.2(Engine Driven) |
- |
100 |
|
- |
| Cl. 9.1.5.1(Motor Driven) |
- |
100 |
|
- |
| Cl. 9.1.4(Submergence Required) |
- |
100 |
|
- |
| Cl. 9.1.2(Specification of Pump) |
- |
100 |
|
- |
| Cl. 8.2(Direction of Rotation) |
- |
100 |
|
- |
| Cl. 8.1(Direction of Rotation) |
- |
100 |
|
- |
| Cl. 9.2.4 (f)(speed) |
- |
100 |
|
- |
| Cl. 9.2.4 (e)(Head in meters/kW rating) |
- |
100 |
|
- |
| Cl. 9.2.4 (d)(Type of Impeller) |
- |
100 |
|
- |
| Cl. 9.2.4 (c)(Type) |
- |
100 |
|
- |
| Cl. 9.2.4 (b)(Serial number/year of manufacture) |
- |
100 |
|
- |
| Cl. 9.2.4 (a)(Name of Manufacturers) |
- |
100 |
|
- |
|
Complete
|
|
14 Jun, 2025 |
-
- |
| 8062 |
NSIC - Technical Services Centre
| IS 12786 (1989) |
Irrigation equipment - Polyethylene pipes for irrigation laterals - Specification |
- |
-
|
7100 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5 and Table 1(DIMENSIONS OF PIPES - outside diameters) |
- |
295 |
|
Include GST |
| 5 and Table 1(DIMENSIONS OF PIPES - wall thickness shall) |
- |
295 |
|
Include GST |
| 7.2(Reversion Test) |
- |
708 |
|
Include GST |
| 7.3(Tensile Test) |
- |
1121 |
|
Include GST |
| 7.3(Elongation at Break) |
- |
1121 |
|
Include GST |
| 7.4(SusceptibiIity to Environmental Stress
Cracking) |
- |
1062 |
|
Include GST |
| 4.1.c & 4.2.a (Carbon Black content - IS 2530 : 1963) |
- |
944 |
|
Include GST |
| 4.2.b (The dispersion of Carbon Black content shall be satisfactory - IS 2530 : 1963) |
- |
590 |
|
Include GST |
| 7.1
Table-2
(b)Acceptance Test for 01 hour at 20°C & 6.9MPa induced stress) |
- |
800 |
|
- |
| 7.1
Table-2
(Hydraulic Characteristics
a)Quality Test for 100 hours at 70°C & 2.5.MPa induced stress.
) |
- |
2000 |
|
- |
|
Complete
|
|
14 Jun, 2025 |
-
- |
| 8063 |
NAWaL Analytical Labs India Private Limited
| IS 13428 (2005) |
Packaged natural mineral water specification (Second Revision) |
- |
-
|
17250 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6.1.1(Escherichia coli(or thermotolerant bacteria)) |
- |
250 |
|
18% GST Extra |
| 6.1.2(Coliform , bacteria) |
- |
250 |
|
18% GST Extra |
| 6.1.3(Faecal Streptococci ) |
- |
399.99 |
|
18% GST Extra |
| 6.1.3(Staphylococcus Aureus) |
- |
400 |
|
18% GST Extra |
| 6.1.4(Sulphite Reducing Anaerobes ) |
- |
400 |
|
18% GST Extra |
| 6.1.5(Pseudomonas Aeruginosa ) |
- |
400 |
|
18% GST Extra |
| 6.1.6(Yeast and Mould ) |
- |
400 |
|
18% GST Extra |
| 6.1.7(Salmonella ) |
- |
400 |
|
18% GST Extra |
| 6.1.7(Shigella) |
- |
400 |
|
18% GST Extra |
| 6.1.8(Vibrio cholera ) |
- |
400 |
|
18% GST Extra |
| 6.1.8(Vibrio parahemolyticus) |
- |
399.98 |
|
18% GST Extra |
| 6.2 Table-1 i(Colour) |
- |
300 |
|
18% GST Extra |
| 6.2 Table-1 ii(Odour) |
- |
100 |
|
18% GST Extra |
| 6.2 Table-1 iii(Taste) |
- |
100 |
|
18% GST Extra |
| 6.2 Table-1 iv(Turbidity) |
- |
140 |
|
18% GST Extra |
| 6.2 Table-1 v(Total dissolved solids) |
- |
140 |
|
18% GST Extra |
| 6.2 Table-1 vi(pH) |
- |
70 |
|
18% GST Extra |
| 6.2 Table-2 i(Nitrate (as NO3)) |
- |
200 |
|
18% GST Extra |
| 6.2 Table-2 ii(Nitrite (as NO2)) |
- |
200 |
|
18% GST Extra |
| 6.2 Table-2 iii(Sulphide (as H2S)) |
- |
175 |
|
18% GST Extra |
| 6.2 Table-2 iv(Manganese (as Mn)) |
- |
175 |
|
18% GST Extra |
| 6.2 Table-2 v(Copper (as Cu)) |
- |
175 |
|
18% GST Extra |
| 6.2 Table-2 vi(Zinc (as Zn)) |
- |
175 |
|
18% GST Extra |
| 6.2 Table-2 vii(Flouride (as F)) |
- |
200 |
|
18% GST Extra |
| 6.2 Table-2 viii(Barium (as Ba)) |
- |
225 |
|
18% GST Extra |
| 6.2 Table-2 ix(Antimony (as Sb)) |
- |
225 |
|
18% GST Extra |
| 6.2 Table-2 x(Borates (as B)) |
- |
200 |
|
18% GST Extra |
| 6.2 Table-2 xi(Silver (as Ag)) |
- |
175 |
|
18% GST Extra |
| 6.2 Table-2 xii(Chloride (as Cl)) |
- |
225 |
|
18% GST Extra |
| 6.2 Table-2 xiii(Sulphate (as SO4),) |
- |
175 |
|
18% GST Extra |
| 6.2 Table-2 xiv(Magnesium (as Mg)) |
- |
125 |
|
18% GST Extra |
| 6.2 Table-2 xv(Calcium (as Ca)) |
- |
125 |
|
18% GST Extra |
| 6.2 Table-2 xvi(Sodium (as Na)) |
- |
125 |
|
18% GST Extra |
| 6.2 Table-2 xvii(Alkalinity (as HCO3)) |
- |
175 |
|
18% GST Extra |
| 6.2 Table-2 xviii(Selenium (as Se)) |
- |
175 |
|
18% GST Extra |
| 6.2 Table-2 xix(Mineral Oil) |
- |
500 |
|
18% GST Extra |
| 6.2 Table-2 xx(Phenolic compounds (as C6H5OH)) |
- |
250 |
|
18% GST Extra |
| 6.2 Table-2 xxi(Anionic surface active agents (as MBAS)) |
- |
175 |
|
18% GST Extra |
| 6.2 Table-3 i(Arsenic (as As)) |
- |
175 |
|
18% GST Extra |
| 6.2 Table-3 ii(Cadmium (as Cd)) |
- |
175 |
|
18% GST Extra |
| 6.2 Table-3 iii(Cyanide (as CN)) |
- |
175 |
|
18% GST Extra |
| 6.2 Table-3 iv(Chromium (as Cr)) |
- |
250 |
|
18% GST Extra |
| 6.2 Table-3 v(Mercury (as Hg)) |
- |
250 |
|
18% GST Extra |
| 6.2 Table-3 vi(Lead (as Pb) |
- |
250 |
|
18% GST Extra |
| 6.2 Table-3 vii(Nickel (as Ni)) |
- |
250 |
|
18% GST Extra |
| 6.2 Table-3 viii(Polychlorinated biphenyle (PCB)) |
- |
1050 |
|
18% GST Extra |
| 6.2 Table-3 ix(Polynuclear aromatic hydrocarbons) |
- |
1050 |
|
18% GST Extra |
| 6.3(o,p DDT) |
- |
137 |
|
18% GST Extra |
| 6.3(p,p DDT) |
- |
137 |
|
18% GST Extra |
| 6.3(o,p DDE) |
- |
137 |
|
18% GST Extra |
| 6.3(p, DDE) |
- |
137 |
|
18% GST Extra |
| 6.3(o,p DDD) |
- |
137 |
|
18% GST Extra |
| 6.3(p,p DDD) |
- |
137 |
|
18% GST Extra |
| 6.3(γ-HCH (Lindane)) |
- |
137 |
|
18% GST Extra |
| 6.3(α-HCH) |
- |
137 |
|
18% GST Extra |
| 6.3(β-HCH) |
- |
137 |
|
18% GST Extra |
| 6.3(δ-HCH) |
- |
137 |
|
18% GST Extra |
| 6.3(α Endosulfan) |
- |
137 |
|
18% GST Extra |
| 6.3(β Endosulfan) |
- |
137 |
|
18% GST Extra |
| 6.3(Endosulfan Sulphate) |
- |
137 |
|
18% GST Extra |
| 6.3(Monocrotophos) |
- |
137 |
|
18% GST Extra |
| 6.3(Ethion) |
- |
137 |
|
18% GST Extra |
| 6.3(Chlorpyrifos) |
- |
137 |
|
18% GST Extra |
| 6.3(Phorate) |
- |
137 |
|
18% GST Extra |
| 6.3(Phorate sulphoxide) |
- |
137 |
|
18% GST Extra |
| 6.3(phorate sulphone) |
- |
137 |
|
18% GST Extra |
| 6.3(2,4-D) |
- |
137 |
|
18% GST Extra |
| 6.3(Butachlor) |
- |
137 |
|
18% GST Extra |
| 6.3(Isoproturon) |
- |
137 |
|
18% GST Extra |
| 6.3(Alachlor) |
- |
137 |
|
18% GST Extra |
| 6.3(Atrazine) |
- |
137 |
|
18% GST Extra |
| 6.3(Methyl Parathion) |
- |
137 |
|
18% GST Extra |
| 6.3(Methyl Paraoxon) |
- |
137 |
|
18% GST Extra |
| 6.3(Malathion) |
- |
137 |
|
18% GST Extra |
| 6.3(Malaoxon) |
- |
137 |
|
18% GST Extra |
| 6.3(Aldrin) |
- |
137 |
|
18% GST Extra |
| 6.3(Dieldrin) |
- |
137 |
|
18% GST Extra |
| 6.1.8(Vibrio parahemolyticus) |
- |
399.98 |
|
- |
|
Complete
|
|
21 Mar, 2028 |
-
Uranium parameter included w.e.f. 28-07-2021.. Except Radioactive residues |
| 8064 |
NAWaL Analytical Labs India Private Limited
| IS 15757 (2007) |
Follow-up formula - Complementary foods - Specification |
- |
-
|
62500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 5.7(Flavour and Odour) |
- |
400 |
|
18% GST Extra |
| 5.8.1 (Bacterial Count ) |
- |
800 |
|
18% GST Extra |
| 5.8.2 (Coliform Count ) |
- |
800 |
|
18% GST Extra |
| 5.8.3 (Escherichia Coli ) |
- |
800 |
|
18% GST Extra |
| 5.8.4 (Staphylococcus Aureus ) |
- |
800 |
|
18% GST Extra |
| 5.8.5 (Salmonella and Shigella ) |
- |
800 |
|
18% GST Extra |
| 5.8.6 (Yeast and Mould Count ) |
- |
800 |
|
18% GST Extra |
| Table 1 (i)(Moisture) |
- |
250 |
|
18% GST Extra |
| Table 1 (ii)(Total milk protein) |
- |
250 |
|
18% GST Extra |
| Table 1 (iii)(Total fat) |
- |
500 |
|
18% GST Extra |
| Table 1 (iv)(Total ash (Annex B of IS 14433)) |
- |
250 |
|
18% GST Extra |
| Table 1 (v)(Acid insoluble ash (Annex B of IS 14433)) |
- |
500 |
|
18% GST Extra |
| Table 1 (vi)(Solubility: Solubility index (IS 12759)
) |
- |
250 |
|
18% GST Extra |
| Table 1 (vii)(VitaminA (as retinol) (IS 5886)) |
- |
2250 |
|
18% GST Extra |
| Table 1 (ix)(Added vitamin D (IS 5835)) |
- |
2250 |
|
18% GST Extra |
| Table 1 (x)(Thiamine (IS 5398)) |
- |
2250 |
|
18% GST Extra |
| Table 1 (xi)(Riboflavin (IS 5399)) |
- |
2250 |
|
18% GST Extra |
| Table 1 (xii)(Niacin (IS 5400)) |
- |
2250 |
|
18% GST Extra |
| Table 1 (xiii)(VitaminB6 (pyridoxine) (IS 7530)) |
- |
1250 |
|
18% GST Extra |
| Table 1 (xiv)(Folic acid (IS 7234
)) |
- |
2250 |
|
18% GST Extra |
| Table 1 (xv)(Pantothenic acid (IS 9840)) |
- |
2250 |
|
18% GST Extra |
| Table 1 (xvi)(VitaminB12 (IS 7529
)) |
- |
2250 |
|
18% GST Extra |
| Table 1 (xvii)(Biotin (IS 9820)) |
- |
2250 |
|
18% GST Extra |
| Table 1 (xviii)(Vitamin C (IS 5838)) |
- |
2250 |
|
18% GST Extra |
| Table 1 (xix)(VitaminE (IS 7235)) |
- |
2250 |
|
18% GST Extra |
| Table 1 (xx)(VitaminK (IS 7235)) |
- |
2250 |
|
18% GST Extra |
| Table 1 (xxii)(Sodium (IS 12760)) |
- |
1500 |
|
18% GST Extra |
| Table 1 (xxiii)(Potassium (IS 12760)) |
- |
1500 |
|
18% GST Extra |
| Table 1 (viii)(Iron (AnnexD of IS 14433
)) |
- |
1800 |
|
18% GST Extra |
| Table 1 (xxi)(Choline (IS 7235)) |
- |
3000 |
|
18% GST Extra |
| Table 1 (xxiv)(Chloride (IS 11763
)) |
- |
800 |
|
18% GST Extra |
| Table 1 (xxv)(Calcium (IS 5949)) |
- |
250 |
|
18% GST Extra |
| Table 1 (xxvi)(Phosphorus (IS 12756)) |
- |
850 |
|
18% GST Extra |
| Table 1 (xxvii)(Magnesium (IS 5949)) |
- |
250 |
|
18% GST Extra |
| Table 1 (xxviii)(Iodine (ClauseA·2 of IS1224)) |
- |
800 |
|
18% GST Extra |
| Table 1 (xxix)( Copper (Clause 15 of IS 1699)) |
- |
1800 |
|
18% GST Extra |
| Table 1 (xxx)(Zinc (Clause 15 of IS 1699)) |
- |
1800 |
|
18% GST Extra |
| Table 1 (xxxi)(Manganese (Clause 35 of IS 3025)) |
- |
1800 |
|
18% GST Extra |
| Table 1 (xxxii)(Selenium (Clause 35 of IS 3025)) |
- |
2250 |
|
18% GST Extra |
| Table 1 (xxxiii)(Heavy metals: a) Lead (IS 12074)) |
- |
1800 |
|
18% GST Extra |
| Table 1 (xxxiii)(Heavy metals: b) Arsenic (IS 11124)) |
- |
2250 |
|
18% GST Extra |
| Table 1 (xxxiii)(Heavy metals: c) Tin (Clause 17 of IS 2860)) |
- |
1800 |
|
18% GST Extra |
| Table 1 (xxxiii)(Heavy metals: d)Cadmium (Clause 15 of IS 1699)) |
- |
1800 |
|
18% GST Extra |
|
Complete
|
|
21 Mar, 2028 |
-
- |
| 8065 |
NAWaL Analytical Labs India Private Limited
| IS 2052 (2009) |
Compounded feeds for cattle - Specification (Fourth Revision) |
- |
-
|
11350 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1(Description - The feed shall be free from harmful constituents, metallic pieces and adulterants. The feed shall also be free from fungal growth and insect infestation. And from fermented . musty, rancid or any other objectionable odour) |
- |
300 |
|
18% GST Extra |
| 4.3 - Table 1 - i(Moisture - Cl 4 of IS 7874 (Part 1)) |
- |
450 |
|
18% GST Extra |
| 4.3 - Table 1 - ii(Crude protein (N x 6.25) - Cl 5 of IS 7874 (Part 1)) |
- |
400 |
|
18% GST Extra |
| 4.3 - Table 1 - iii(Crude fat - Cl 7 of IS 7874 (Part 1)) |
- |
400 |
|
18% GST Extra |
| 4.3 - Table 1 - iv(Crude fibre - Cl 8 of IS 7874 (Part 1)) |
- |
400 |
|
18% GST Extra |
| 4.3 - Table 1 - v(Acid insoluble ash - Cl 10 of IS 7874 (Part 1)) |
- |
400 |
|
18% GST Extra |
| 4.3 - Table 2 - i(Salt (as NaCl) - Cl 4 of IS 7874 (Part 2)) |
- |
400 |
|
18% GST Extra |
| 4.3 - Table 2 - ii(Calcium (as Ca) - IS 13433 (Part 1 / Part 2)) |
- |
400 |
|
18% GST Extra |
| 4.3 - Table 2 - iii(Total Phosphorus - IS 14828) |
- |
400 |
|
18% GST Extra |
| 4.3 - Table 2 - iv(Available Phosphorus - Annex C of IS 1374) |
- |
400 |
|
18% GST Extra |
| 4.3 - Table 2 - v(Urea - IS 7874 ) |
- |
400 |
|
18% GST Extra |
| 4.3 - Table 2 - vi(Vitamin A - ISO 14565) |
- |
1500 |
|
18% GST Extra |
| 4.3 - Table 2 - vii(Vitamin D3 - Annex E) |
- |
1500 |
|
18% GST Extra |
| 4.3 - Table 2 - viii(Vitamin E - Annex F) |
- |
1500 |
|
18% GST Extra |
| 4.3 - Table 2 - ix(Aflatoxin B1- Annex G) |
- |
2500 |
|
18% GST Extra |
| 4.3 Table 2(Cadmium) |
- |
0 |
|
0 |
|
Complete
|
|
21 Mar, 2028 |
-
- |
| 8066 |
NAWaL Analytical Labs India Private Limited
| IS 14433 (2007) |
Infant milk substitutes - Specification (First Revision) |
- |
-
|
48500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6.4(Scorched particles) |
- |
150 |
|
18% GST Extra |
| 6.3(Flavour taste and odour) |
- |
250 |
|
18% GST Extra |
| 6.5(Linoleate) |
- |
250 |
|
18% GST Extra |
| 6.5(Vitamin E (for type 2 only)) |
- |
1000 |
|
18% GST Extra |
| 6.9.1(Bacterial count) |
- |
800 |
|
18% GST Extra |
| 6.9.2(Coliform count) |
- |
800 |
|
18% GST Extra |
| 6.9.3(Escherichia coli) |
- |
800 |
|
18% GST Extra |
| 6.9.4(Staphylococcus Aureus) |
- |
800 |
|
18% GST Extra |
| 6.9.5(Salmonella and shigella) |
- |
800 |
|
18% GST Extra |
| 6.9.6(Yeast and mould count) |
- |
800 |
|
18% GST Extra |
| 6.1(Moisture) |
- |
250 |
|
18% GST Extra |
| 6.1(Milk protein) |
- |
250 |
|
18% GST Extra |
| 6.1(Milk fat) |
- |
250 |
|
18% GST Extra |
| 6.1(Total ash) |
- |
250 |
|
18% GST Extra |
| 6.1(Acid insoluble ash) |
- |
150 |
|
18% GST Extra |
| 6.1(Insolubility index) |
- |
300 |
|
18% GST Extra |
| 6.1(Solubility) |
- |
150 |
|
18% GST Extra |
| 6.1(Vitamin A (as Retinol)) |
- |
2000 |
|
18% GST Extra |
| 6.1(Iron) |
- |
1000 |
|
18% GST Extra |
| 6.1(Lead) |
- |
1000 |
|
18% GST Extra |
| 6.1(Arsenic) |
- |
2000 |
|
18% GST Extra |
| 6.1(Tin) |
- |
1000 |
|
18% GST Extra |
| 6.1(Cadmium) |
- |
1000 |
|
18% GST Extra |
| 6.1(Added Vitamin D (expressed as chole-calciferol)) |
- |
2000 |
|
18% GST Extra |
| 6.1(Thiamin) |
- |
2000 |
|
18% GST Extra |
| 6.1(Niacin) |
- |
2000 |
|
18% GST Extra |
| 6.1(Riboflavin) |
- |
2000 |
|
18% GST Extra |
| 6.1(Vitamin B6) |
- |
2000 |
|
18% GST Extra |
| 6.1(Vitamin B12) |
- |
2000 |
|
18% GST Extra |
| 6.1(Folic acid) |
- |
2000 |
|
18% GST Extra |
| 6.1(Pentothenic acid) |
- |
2000 |
|
18% GST Extra |
| 6.1(Biotin ) |
- |
2000 |
|
18% GST Extra |
| 6.1(Vitamin C) |
- |
2000 |
|
18% GST Extra |
| 6.1(Vitamin K) |
- |
2000 |
|
18% GST Extra |
| 6.1(Calcium) |
- |
250 |
|
18% GST Extra |
| 6.1(Phosphorus) |
- |
850 |
|
18% GST Extra |
| 6.1(Iodine) |
- |
250 |
|
18% GST Extra |
| 6.1(Copper) |
- |
1000 |
|
18% GST Extra |
| 6.1(Manganese) |
- |
1000 |
|
18% GST Extra |
| 6.1(Zinc) |
- |
1000 |
|
18% GST Extra |
| 6.1(Sodium) |
- |
300 |
|
18% GST Extra |
| 6.1(Potassium) |
- |
300 |
|
18% GST Extra |
| 6.1(Chloride) |
- |
300 |
|
18% GST Extra |
| 6.1(Magnesium) |
- |
250 |
|
18% GST Extra |
| 6.1(Choline) |
- |
3000 |
|
18% GST Extra |
| 6.1(Vitamin E ( as alpha tocopherol compounds)) |
- |
2000 |
|
18% GST Extra |
|
Complete
|
|
21 Mar, 2028 |
-
- |
| 8067 |
NAWaL Analytical Labs India Private Limited
| IS 1656 (2007) |
Milk - Cereal based complementary foods - Specification (Fourth Revision) |
- |
-
|
18000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4' 5.1 to 5.4(Description) |
- |
150 |
|
18% GST Extra |
| 5.6(Flavour and odour) |
- |
150 |
|
18% GST Extra |
| 5.7.1(Bacterial count) |
- |
500 |
|
18% GST extra |
| 5.7.2(Coliform count) |
- |
500 |
|
18% GST extra |
| 5.7.3(Escherichia coli) |
- |
500 |
|
18% GST extra |
| 5.7.4(Staphylococcus aureus) |
- |
500 |
|
18% GST extra |
| 5.7.5(Salmonella and shigella) |
- |
600 |
|
18% GST extra |
| 5.7.6(Yeast and mould count) |
- |
600 |
|
18% GST extra |
| 5.8(Moisture) |
- |
150 |
|
18% GST extra |
| 5.8(Total protein) |
- |
150 |
|
18% GST extra |
| 5.8(Fat) |
- |
150 |
|
18% GST extra |
| 5.8(total Carbohydrates) |
- |
150 |
|
18% GST extra |
| 5.8(Total Ash) |
- |
200 |
|
18% GST extra |
| 5.8(Acid insoluble ash) |
- |
250 |
|
18% GST extra |
| 5.8(Vitamin A (as Retinol)) |
- |
1100 |
|
18% GST extra |
| 5.8(Vitamin C) |
- |
1100 |
|
18% GST extra |
| 5.8(Iron) |
- |
700 |
|
18% GST extra |
| 5.8(Crude Fibre(on dry basis)) |
- |
250 |
|
18% GST extra |
| 5.8(Added vitamin D(expressed as cholecalciferol or ergocalciferol)) |
- |
1100 |
|
18% GST extra |
| 5.8(Thiamine) |
- |
1100 |
|
18% GST extra |
| 5.8(Riboflavin) |
- |
1100 |
|
18% GST extra |
| 5.8(Niacin) |
- |
1100 |
|
18% GST extra |
| 5.8(Folic acid) |
- |
1100 |
|
18% GST extra |
| 5.8(Zinc) |
- |
700 |
|
18% GST extra |
| 5.8(Copper) |
- |
700 |
|
18% GST extra |
| 5.8(Heavy metals, Lead) |
- |
700 |
|
18% GST extra |
| 5.8(Arsenic) |
- |
900 |
|
18% GST extra |
| 5.8(Tin) |
- |
900 |
|
18% GST extra |
| 5.8(Cadmium) |
- |
900 |
|
18% GST extra |
|
Complete
|
|
21 Mar, 2028 |
-
- |
| 8068 |
Institute for Auto Parts and Hand Tools Technology
| IS 5872 (1990) |
Cold rolled steel strips (Box Strappings) - Specification |
All Grade / Type / Size / Designation as per IS 5872 |
-
|
5480 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 6(UTM) |
- |
900 |
|
Rs 900/ sample for Mechanical testing
Note : sample preparation charges extra. |
| Cl 7(Bending To Both Side At 90°, Then Straight) |
- |
1000 |
|
Rs. 1000/ sample for Bend and re- bend test
Note : sample preparation charges extra. |
| Cl 9(Workmanship) |
- |
500 |
|
Rs 500/ sample for freedom from defects. |
| Cl 10(Width & Thickness) |
- |
1200 |
|
Rs 1200/ sample for dimensional tolerances. |
| 5(Chemical Composition) |
- |
880 |
|
C, Mn, P, S = Rs 100/Element = Rs 400
Nb, V, Ti, B = Rs120/Element. = Rs 480 |
| Cl 11(Workmanship) |
- |
500 |
|
- |
| Cl 12(Coating) |
- |
500 |
|
- |
|
Complete
|
|
17 Feb, 2028 |
-
- |
| 8069 |
Institute for Auto Parts and Hand Tools Technology
| IS 2062 (2011) |
Hot rolled medium and high tensile structural steel - Specification (Seventh Revision) |
All Grade / Type / Size / Designation as per IS 2062 |
-
|
16980 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 10.3(UTM) |
- |
900 |
|
Rs 900/ sample for Mechanical Testing
Sample Preparation charges extra.
- |
| Cl 11.3(Press) |
- |
500 |
|
Rs 500/ sample for Bend Test.
Sample Preparation charges extra. |
| Cl 12(Sudden Load Applied) |
- |
4000 |
|
RS 1000 / set for impact test at ambient temp.
Rs 3000/ set for Impact test at Sub Zero temp. (-20 degree C) |
| Cl 15(Length, Width & Thickness) |
- |
1700 |
|
Rs 1200 / sample for Dimensions.
Rs 500/- for calculation of mass. |
| Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
120 |
|
C, Si, Mn, P, S = Rs 100/Element
- Nb, Ti, B, Cr, Mo, V, Ni, Cu, Al, = Rs 120/Element
If "N” is required, then testing charges will be extra @ 2500/- per Sample for this element |
| Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
120 |
|
- |
| Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
120 |
|
- |
| Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
120 |
|
- |
| Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
120 |
|
- |
| Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Carbon Equivalent- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
500 |
|
- |
| Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
2500 |
|
- |
| Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
100 |
|
- |
| Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
100 |
|
- |
| Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
100 |
|
- |
| Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
100 |
|
- |
| Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
580 |
|
Nb, Ti, B, Al = 120/ element= 480/-
Carbon= 100/-
Total= 480+100= 580/- |
| 14.1(Soundness test) |
- |
1000 |
|
- |
| 14.2(Grain Size) |
- |
400 |
|
- |
| 14.2(Inclusion) |
- |
400 |
|
- |
| Cl 13(Y Groove Cracking Test) |
- |
2000 |
|
- |
| Cl 7(Workmanship) |
- |
500 |
|
- |
| Cl 18(Weight) |
- |
500 |
|
- |
| 16(Tolerance) |
- |
500 |
|
- |
|
Complete
|
|
17 Feb, 2028 |
-
- |
| 8070 |
Institute for Auto Parts and Hand Tools Technology
| IS 6118 (2017) |
Pliers and nippers - Multiple slip joint pliers - Dimensions and test values (Second Revision) |
All Grade / Type / Size / Designation etc |
-
|
3360 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Table 1(l) |
- |
2660 |
|
Rs 1200 for dim.= 1200/
- C, Si, Mn, P, S = Rs 100/Element. = Rs 500
- Cr, Cu, V, Mo, Ni, W, Sn, Co = Rs 120/Element. = Rs 960 |
| Table 1(t1, max) |
- |
700 |
|
Hardness Test (HV or HRc) = 400/-
Handle load Test = 300/- |
| Table 1(g, min) |
- |
0 |
|
0 |
| Table 1(l3.min) |
- |
0 |
|
- |
| Table 1(l1) |
- |
0 |
|
- |
| Table 1(Fa) |
- |
0 |
|
- |
| Table 1(Sb) |
- |
0 |
|
- |
|
Complete
|
|
17 Feb, 2028 |
-
Revised version of IS 6118:2017 included. |
