BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

14028 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

8011

Bharat Test House Pvt Ltd 1474 Sonipat Haryana

9135626

IS 16270 (2023)

Secondary cells and batteries for solar photovoltaic application - General requirements and methods of test

Secondary Cells and Batteries for Solar Photovoltaic Ap

575000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(Photovoltaic Energy System)	-	0	-
Cl-4.2(Secondary Cells and Batteries)	-	0	-
Cl-4.3(General Operating Conditions)	-	0	-
Cl-4.3.8(Storage)	-	0	-
Cl-4.3.9(Operating Temperature)	-	0	-
Cl-5.1(Mechanical Endurance)	-	0	-
Cl-5.2(Charge Efficiency)	-	0	-
Cl-5.3(Deep Discharge Protection)	-	0	-
Cl-5.4(Marking)	-	2500	-
Cl-5.5(Safety)	-	0	-
Cl-5.6(Documentation)	-	0	-
Cl-6(Functional characteristice)	-	0	-
Cl-7(General test conditions)	-	0	-
Cl-8.1(Capacity Test)	-	125000	-
Cl-8.2(Endurance Test)	-	132500	-
Cl-8.3(Charge Retention Test)	-	100000	-
Cl-8.4(Cycle Endurance in Photovoltaic Application (Extreme Conditions))	-	125000	-
Cl-8.5(Sulphation Test (Applicable for Lead Acid Batteries only))	-	42500	-
Cl-8.6(Water Loss Test (Valid for Flooded Lead Acid Batteries only))	-	47500	-
Cl-9.1(Type Tests)	-	0	-
Cl-9.2(Acceptance Test)	-	0	-

19 Mar, 2026

-
-

8012

Delhi Analytical Research Laboratory

8169106

IS 14735 (1999)

Unplasticized Polyvinyl Chloride (UPVC) Injection Moulded Fittings for Soil and Waste Discharge System for Inside and Outside Buildings Including Ventilation and Rain Water System -

40 to 160 mm

15400 View breakup
Rs.15400/-(10% discount to BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Colour of fittings)	-	100	10% discount to BIS
7.1,Table 1(Wall thickness)	-	300	10% discount to BIS
7.2 ,Table 2&3(Socket Dimensions)	-	400	10% discount to BIS
8(Sealing Rings)	-	500	10% discount to BIS
10(Workmanship)	-	100	10% discount to BIS
12.1(Visual appearance)	-	100	10% discount to BIS
12.2(Stress relief test)	-	1000	10% discount to BIS
12.3(Vicat softening tempewrature)	-	1200	10% discount to BIS
Cl.13, IS 12235 (P-7)-2004, (Resistance to Sulphuric Acid)	-	1000	10% discount to BIS
Cl.15, Annex B(Sulphated Ash Content)	-	700	10% discount to BIS
16.1(Impact test)	-	1000	10% discount to BIS
17(Watet tightness of joint)	-	1500	10% discount to BIS
Cl.14, Annex A(Titanium Di-Oxide Content)	-	1500	10% discount to BIS
7.3(Dimensions of waste trap(Nahani Trap)	-	500	10% discount to BIS
11.4,Table 5(Vent cowl)	-	500	10% discount to BIS
3(Type of Fitting)	-	100	10% discount to BIS
4(Size Designation)	-	100	10% discount to BIS
7.4(Chamfer)	-	100	10% discount to BIS
11.3(Access Openings)	-	300	10% discount to BIS
12.4(Effect on water test)	-	2000	10% discount to BIS

20 Oct, 2027

-
-

8013

Delhi Analytical Research Laboratory

8169106

IS 14333 (2022)

Polyethylene Pipes for Sewerage and Industrial Chemicals and Effluent ï¿½ Specification (First Revision)

63 to 500 mm

28200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2.1,T2("Base Density (At 27°C Temp.)-IS 7328:2020 ")	-	500	10% Discount for BIS Lab
5.2.1,T2(Melt Flow Rate (At 190°C /5kg)-IS 2530:1963)	-	1000	10% Discount for BIS Lab
5.2.1,T2(Thermal Stability(Oxidation Induction Time)-IS 4984:2016(Annexure-B))	-	1500	10% Discount for BIS Lab
5.2.1,T2("Volatile Matter- IS 4984:2016 (Annexure-C)")	-	1000	10% Discount for BIS Lab
5.2.1,T2("Water Content-IS 4984:2016 (Annexure-D)")	-	1000	10% Discount for BIS Lab
5.2.1.1, T2(Compound Density-IS 7328:2020)	-	500	10% Discount for BIS Lab
5.2.1.1, T2("Compound carbon black -IS 2530:1963 content")	-	1000	10% Discount for BIS Lab
5.2.1.1, T2(Compound Toluene extract - Any Method)	-	1000	10% Discount for BIS Lab
5.2.1.1, T2(Compound maximum volatile matter -IS 4984:2016 (Annexure-C))	-	1000	10% Discount for BIS Lab
5.2.1.1, T2(Compound carbon black particle size- Any Method)	-	500	10% Discount for BIS Lab
5.2.1.1, T2(Compound ash content - Any Method)	-	500	10% Discount for BIS Lab
5.2.1.1, T2("Compound carbon black -IS 2530:1963 dispersion")	-	1000	10% Discount for BIS Lab
5.3(Density of Higher olefin - IS 7328:2020)	-	1000	10% Discount for BIS Lab
5.3(Olefin Constituents- 14333-2022)	-	1000	10% Discount for BIS Lab
5.3(Loading of Carbon Black - IS 2530:1963)	-	1000	10% Discount for BIS Lab
5.3(Ash content- Any Method)	-	500	10% Discount for BIS Lab
5.3(Toluene extract - Any Method)	-	1000	10% Discount for BIS Lab
5.3("Maximum volatile matter -IS 4984:2016 (Annexure-C)")	-	1000	10% Discount for BIS Lab
5.3(Carbon black particle size - Any Method)	-	500	10% Discount for BIS Lab
5.4(Antioxidant - Any Method)	-	2000	10% Discount for BIS Lab
6.2(Colour- IS 14333-2022)	-	200	10% Discount for BIS Lab
7.1(Visual Appearance- IS 14333-2022)	-	200	10% Discount for BIS Lab
7.2(Length- IS 14333-2022)	-	200	10% Discount for BIS Lab
7.3(Coiling- IS 14333-2022)	-	200	10% Discount for BIS Lab
7.4,T3 of IS 4984(Outside Diameter-IS 4984-2016)	-	200	10% Discount for BIS Lab
7.4,T4 of IS 4984(wall Thickness-IS 4984-2016)	-	200	10% Discount for BIS Lab
7.4,T3 of IS 4984(Ovality-IS 4984-2016)	-	200	10% Discount for BIS Lab
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 27 oC , Test Period - 100 hrs.-IS 4984-2016 (Annexure-E))	-	2000	10% Discount for BIS Lab
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 48 hrs.-IS 4984-2016 (Annexure-E))	-	2000	10% Discount for BIS Lab
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 165 hrs.-IS 4984-2016 (Annexure-E))	-	2500	10% Discount for BIS Lab
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 1000 hrs.-IS 4984-2016 (Annexure-E))	-	6000	10% Discount for BIS Lab
8.1.2, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 48 hrs.-IS 4984-2016 (Annexure-E))	-	2000	10% Discount for BIS Lab
8.2("Longitudinal Reversion Test - IS 4984-2016 (Annexure-F)")	-	1000	10% Discount for BIS Lab
8.3(Carbon black content- IS 2530-1963)	-	1000	10% Discount for BIS Lab
8.3(Carbon black content Dispersion- IS 2530-1963)	-	1000	10% Discount for BIS Lab
8.4(Melt Flow rate(Temperature - 190oC,Mass 5kg)-IS 2530-1963)	-	1000	10% Discount for BIS Lab
8.5(Oxidation Induction Time -IS 4984:2016(Annexure-B))	-	1500	10% Discount for BIS Lab
8.6(Density-IS 7328:2020)	-	500	10% Discount for BIS Lab
8.7("Tensile Strength for Butt Fusion - IS 4984-2016 (Annexure-G)")	-	1500	10% Discount for BIS Lab
8.8,T5("Tensile - IS 4984-2016 (Annexure-H)")	-	1500	10% Discount for BIS Lab
8.8,T5("Elongation -IS 4984-2016 (Annexure-H)")	-	1500	10% Discount for BIS Lab
8.9(Slow Crack Growth Rate{Internal Pressure creep Rupture test, Temperature - 80±1 oC , Test Pressure – 0.80MPa, Test Period - 500 hrs.-IS 4984-2016 (Annexure-E &J))	-	4000	10% Discount for BIS Lab

20 Oct, 2027

-
Included w.e.f. 18-10-2022

8014

Delhi Analytical Research Laboratory

8169106

IS 17425 (2020)

Irrigation Equipment - Quick Coupled Polyethylene Pipes and Fittings for Sprinkler Irrigation Systems - Specification

40 to 200 mm

28000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.5(Di men sion)	-	500	10% Discount for BIS Lab
5.1.2(Ovality)	-	200	10% Discount for BIS Lab
6.2 b(Material Identification - Male & Female Coupler)	-	500	10% Discount for BIS Lab
6.1(Quick Coupled Pipes and Fittings)	-	4000	10% Discount for BIS Lab
6(Visual Appearance)	-	200	10% Discount for BIS Lab
Cl.7.1.l(Visual Anneara nce)	-	200	10% Discount for BIS Lab
Cl.7.1.2(Hydraulic Characteristic)	-	1500	10% Discount for BIS Lab
Cl.7.1.2(Hydraulic Characteristic)	-	3000	10% Discount for BIS Lab
Cl.7.1.3(Reversion Test)	-	1000	10% Discount for BIS Lab
Cl.7.1.4(Tensile Test)	-	1500	10% Discount for BIS Lab
Cl.7.1.4(Elongation)	-	1500	10% Discount for BIS Lab
Cl.7.1.5(Fusion Compatibility)	-	4500	10% Discount for BIS Lab
Cl.7.1.6(Corrected Density)	-	500	10% Discount for BIS Lab
Cl.7.1.7(MFR Test)	-	1000	10% Discount for BIS Lab
Cl.7.2.l(Leakage Test)	-	1500	10% Discount for BIS Lab
Cl.7.2.2(Cl.7.2.2)	-	1000	10% Discount for BIS Lab
Cl.7.2.3(Weld ability Test)	-	4500	10% Discount for BIS Lab
Cl.6.2.6(Rubber Ring Hardness)	-	1500	10% Discount for BIS Lab
Cl.4.1.3(Den sity Test)	-	500	10% Discount for BIS Lab
Cl.4.1.3(MFR Test)	-	1000	10% Discount for BIS Lab
Cl.4.1.3(Thermal Stabi lity)	-	1500	10% Discount for BIS Lab
Cl.4.1.3, T-1(Volatile Matter)	-	1000	10% Discount for BIS Lab
Cl.4.1.3, T-1(Water Content)	-	1000	10% Discount for BIS Lab
Cl.4.1.4(Carbon Black Content)	-	1000	10% Discount for BIS Lab
Cl.4.1.4(Carbon Black Di spersion)	-	1000	10% Discount for BIS Lab
Cl.4.1.4(Carbon Black Content)	-	4000	10% Discount for BIS Lab

20 Oct, 2027

-
Included w.e.f. 18-10-2022

8015

Delhi Analytical Research Laboratory

8169106

IS 15328 (2003)

Unplasticized Non-Pressure Polyvinyl Chloride ( PVC -U ) Pipes for use in Underground Drainage and Sewerage Systems -

63 to 500 mm

22200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1,6.1.1 IS 12235 (Part 1) Table 1(Dimension of Pipes: Mean outside Diameter, dem)	-	100	10% discount to BIS
6.1,6.1.1 IS 12235 (Part 1) Table 1(Outside Diameter at any point, de)	-	100	-10% discount to BIS
6.1.2 IS 4985 Table 2(Wall Thickness, e )	-	100	10% discount to BIS
6.1.3 (Length of Pipe)	-	100	10% discount to BIS
6.1.4, Table 3(Dimensions of integral sockets and spigot ends :- a) Elastomeric Sealing Ringsockets and spigot ends i)Meean inside dia. Of socket, dsm)	-	100	10% discount to BIS
6.1.4, Table 3(ii) Min. depth of engagement, A. )	-	100	10% discount to BIS
6.1.4 Table 3(iii) Depth of sealing Zone C )	-	100	10% discount to BIS
6.1.4, Table 3(iv) Length of spigot, l1)	-	100	10% discount to BIS
6.1.4, Table 3(v) Chamfer length, H : Approx.)	-	150	10% discount to BIS
6.1.4, Table 4(b) Solvent Cement Joint sockets and spigot ends i) Mean inside dia. Of socket, dsm)	-	100	10% discount to BIS
6.1.4, Table 4(ii) Length of Solvent Cement socket, l2 )	-	100	10% discount to BIS
6.1.4, Table 4(iii) Length of spigot, l1, 100 mm Min.)	-	100	10% discount to BIS
6.1.4, Table 4(iv) Chamfer length, H, 7 mm Approx.)	-	150	10% discount to BIS
6.1.4.1 (wall thickness of sockets e2 min=0.9e )	-	100	10% discount to BIS
6.1.4.1 (e3min=0.75e)	-	100	10% discount to BIS
7.1(Appearance:- )	-	100	10% discount to BIS
7.2(Colour )	-	100	10% discount to BIS
7.3 IS 1223S ( Part 2)(Vicat Softening Temperature When determined according to IS 1223S ( Part 2), shall not be lessthan 79°C.)	-	1000	10% discount to BIS
7.4 IS 1223S ( Part 5)(Longitudinal Reversion: When tested according to the methodprescribed in IS 1223S ( Part 5), shall not exceed ± 5 percent. The pipe shall not exhibit any blisters, bubbles or crackson completion of the test.)	-	800	10% discount to BIS
8.1 Annex B(Resistance to External Blows at 0ºC: When tested according to the method prescribed in Annex B, the pipes hall have a true impact rate of not more than I0 percent.)	-	1000	10% discount to BIS
8.2 Annex C Table 5(Ring Stiffness: When tested according to the method described in Annex C,the ring stiffness of the pipe shall be as stated in Table 5)	-	1500	10% discount to BIS
8.3 IS 12235 ( Part 8/ Sec 1 ) Table 6(Resistance to internal Hydrostatic Pressure(Type Test) a) Acceptance Test:(1h at 27 0 C) )	-	2000	10% discount to BIS
8.3 IS 12235 ( Part 8/ Sec 1 ) Table 6(b) Type Test:(1000h at 60 0 C) )	-	8000	10% discount to BIS
9 9.1, IS 5382(JOINTS:- a) Elastomeric Sealing Rings)	-	500	10% discount to BIS
9.2 IS 14182(b) Solvent cement)	-	3000	10% discount to BIS
10.1.1 Annex D(Internal hydrostatic pressure test for elastomeric sealing ring joints)	-	1500	10% discount to BIS
10.1.2 Annex E(Internal negative hydrostatic pressure test (internal vacuum) for elastomeric sealing ring joints)	-	1500	10% discount to BIS
10.2.1(Internal hydrostatic pressure test for solvent cemented Joints)	-	1500	10% discount to BIS
10.2.2(Internal negative hydrostatic pressure test (internal vacuum)for solvent cemented joints)	-	1500	10% discount to BIS
5,5.2(Composition of the material The material shall contain a minimum of 0.3 percent of rutile grade titanium dioxide.)	-	1500	10% discount to BIS
'7.5 (amdt.7)(Effect on Water (Type test))	-	3500	10% discount to BIS

20 Oct, 2027

-
-

8016

Delhi Analytical Research Laboratory

8169106

IS 10124 : Part 1 (2009)

Fabricated PVC-U Fittings for Potable Water Supplies - Specification Part 1 General Requirements (Second Revision)

Up to 500 mm

2250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1 Table-1 Fig.1(Dimension of Socket length)	-	100	10% discount to BIS
5.1.2 Table-1(Dimensions of mean inside diameter at mid-point of socket depth)	-	100	10% discount to BIS
5.1.3 (Out of Roundness Tolerance of Socket Inside Diameter)	-	100	10% discount to BIS
5.2 Table-2 Fig.2(Dimensions of socket for elastomeric sealing ring)	-	200	10% discount to BIS
6.1(Opacity test in accordance with IS 12235 (Part 3))	-	500	10% discount to BIS
6.2(Short Term Hydraulic Test in accordance with Annex A)	-	1250	10% discount to BIS

20 Oct, 2027

-
-

8017

Delhi Analytical Research Laboratory

8169106

IS 13592 (2013)

Unplasticized Polyvinyl Chloride (PVC-U) Pipes for Soil and Waste Discharge System Inside and Outside Buiildings Including Ventilation and Rainwater System

40 to 315 mm

23300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.5(Surface colour of the pipes shall be dark shade of grey)	-	100	10% discount to BIS
Cl6.3(The composition shall be based on PVC resin having a K-value of 64 or greater when tested in accordance with IS 4669)	-	5000	10% discount to BIS
Cl.7.1(Mean out side Diameter (For less than or equal to 40 mm- Average of 8 , For higher diameters up to 110 mm average of 6))	-	100	10% discount to BIS
Cl.7.1(Outside Diameter at any point (Take 8 reading reported minimum, maximum))	-	100	10% discount to BIS
Cl.7.1(Wall thickness "minimum,maximum" (Take 8 reading))	-	100	10% discount to BIS
Cl.7.2(Pipes shall be supplied in nominal lengths of 2, 3, 4 or 6 metres either plain or with socket for solvent cementing/grooved socket. Tolerances on specified length shall be + 10 mm and – 0 mm.The nominal length of the pipe with socket for solvent cementing/grooved socket shall be as given in Fig. 1.)	-	100	10% discount to BIS
Cl.7.3.2(Dimensions of sockets for solvent cementing and grooved sockets of pipes shall be as given in Tables 3 and 4 respectively, read with Fig. 2 and 3.)	-	500	10% discount to BIS
Cl.8.1(The internal and external surface of the pipes shall be smooth and clean, and free from grooving and other defects. The end shall be clearly cut and shall be square with the axis of the pipe. The end may be chamfered on the plain side.)	-	200	10% discount to BIS
Cl.8.2(When tested by the method described in IS 12235 (Part 5), a length of pipe sample of 200 ± 20 mm shall not alter in length by more than 5 percent. In the case of socket ended pipes, this test shall be carried out on the plain portion of pipe taken at least 100 mm away from the root of the socket.)	-	800	10% discount to BIS
Cl8.3(This test shall be carried out for socket end pipes only. When tested by the method described in IS 12235 (Part 6), the test specimens shall not show blisters, excessive delamination or cracking or signs of weld line splitting.)	-	1500	10% discount to BIS
Cl.8.4(When determined in accordance with IS 12235 (Part 2), the vicat softening temperature of the specimen shall not be less than 79°C.)	-	1000	10% discount to BIS
Cl.8.5(After the required period of exposure, the tensile strengths of two samples when tested as per IS 12235 (Part 13) shall not show difference of more than 20 percent of their initial tensile strengths)	-	4800	10% discount to BIS
Cl. 9, IS 12235 Part 7(Resistance to Sulphuric Acid)	-	2000	10% discount to BIS
Cl.10.1(When tested by method prescribed in IS 12235 (Part 9),the pipe shall have a true impact rate of not more than 10 percent. Mass of striker and height of fall shall be as per Annex A.)	-	1500	10% discount to BIS
Cl.10.2(When determined in accordance with the method described in IS 12235 (Part 13), the tensile strength at break shall not be less than 45 MPa.)	-	1000	10% discount to BIS
Cl.10.3(The axial shrinkage shall not exceed 2 percent when determined in accordance with Annex B.)	-	1500	10% discount to BIS
Cl.11.(Jointing of solvent cementing joints is to be carried out using solvent conforming to IS 14182. Apply a pressure of 0.05 MPa for a period of 15 min and there should be no leakage at any joint.)	-	1500	10% discount to BIS
Cl. 12, IS 12235 Part 11(Resistance to Di-Chloro-Methane)	-	2000	10% discount to BIS
8.6(Effect on Water Test)	-	3000	10% discount to BIS

20 Oct, 2027

-
-

8018

Delhi Analytical Research Laboratory

8169106

IS 4985 (2021)

UNPLASTICIZED PVC PIPES FOR POTABLE WATER SUPPLIES SPECIFICATION Fourth Revision

20 to 500 mm

20100 View breakup
Rs.20100/-(10% discount to BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1.2(PVC Resin)	-	5000	10% Discount For BIS
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Minimum))	-	100	10% Discount For BIS
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Mamimum))	-	100	10% Discount For BIS
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Minimum))	-	100	10% Discount For BIS
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Maximum))	-	100	10% Discount For BIS
7.1.1.2(DIMENSIONS-PIPE-Ovality (Maximum))	-	100	10% Discount For BIS
7.1.2.1(DIMENSIONS-PIPE-Thickness(Minimum))	-	100	10% Discount For BIS
7.1.2.1(DIMENSIONS-PIPE-Thickness(Maximum))	-	100	10% Discount For BIS
7.1.2.1(DIMENSIONS-PIPE-Average Thickness)	-	100	10% Discount For BIS
7.1.3(mean outside diameter, outside diameter at any point, and wall thickness of plumbing pipes)	-	300	10% Discount For BIS
7.1.4(Length)	-	100	10% Discount For BIS
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Minimum Length)	-	100	10% Discount For BIS
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Minimum))	-	100	10% Discount For BIS
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Maximum))	-	100	10% Discount For BIS
7.2.1.2-Table 4(DIMENSIONS-Sockets for elastomeric sealing ring joints-Socket inner Diameter)	-	100	10% Discount For BIS
7.2.1.2(a)-Table 5(DIMENSIONS-Sockets for elastomeric sealing ring joints-Minimum depth of engagement)	-	100	10% Discount For BIS
7.2.1.1 Table3(Angle of taper (Note-1))	-	100	10% Discount For BIS
8(SEALING RINGS)	-	500	10% Discount For BIS
9.1(PIPE ENDS)	-	100	10% Discount For BIS
10.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	100	10% Discount For BIS
10.1(Colour)	-	100	10% Discount For BIS
10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity)	-	500	10% Discount For BIS
10.3(Effect on Water Test)	-	3000	10% Discount For BIS
10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test)	-	800	10% Discount For BIS
10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature)	-	1000	10% Discount For BIS
10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density)	-	500	10% Discount For BIS
10.7(Sulphated Ash Content)	-	700	10% Discount For BIS
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test))	-	10000	10% Discount For BIS
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test))	-	1500	10% Discount For BIS
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)-for Integral Sealing Ring Sockets)	-	10000	10% Discount For BIS
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Integral Sealing Ring Sockets)	-	1500	10% Discount For BIS
11.1.1(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Plumbing pipes)	-	11500	10% Discount For BIS
11.2(Resistance to External Blows at 0°C)	-	1200	10% Discount For BIS

20 Oct, 2027

-
included w.e.f. 11-02-2022.

8019

WELL TECH TEST AND RESEARCH CENTER, DERABASSI

9177306

IS 5204 (1969)

Specifiction for research microscope

24000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. No.3(Dimension)	-	7500	-
Cl. No.4(General requirenment)	-	7500	-
Cl. No.5(Functional requirement)	-	5000	-
Cl. No.6.1(Mechanical test)	-	5000	-
Cl. No.6.2(Optical test)	-	7500	-
Cl. No.7(Marking)	-	500	-

30 Mar, 2027

-
Included w.e.f 03.06.2024 Exclusion: Cl.4 (General Requirement)- Optical glass and optical cement

8020

AADCO TESTING & RESEARCH LABORATORY PVT LTD (F28), GHAZIABAD

8141606

IS 4923 (2017)

Hollow steel sections for structural use - Specification (Third Revision)

All Grade/All Type/All Size

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.7.1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl.7.1(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl.7.1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl.7.1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl.7.1(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl.7.1(Aluminium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl.7.1(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl.7.1(Niobium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl.7.1(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl.7.1(Titanium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl.7.1(Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	2000	-
Cl.7.1(Carbon Equivalent-IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Depth))	-	250	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Width))	-	250	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Thickness))	-	250	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Weigth))	-	250	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Area of Section))	-	200	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia))	-	200	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia about X-X))	-	200	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia about Y-Y))	-	200	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Radius of Gyration))	-	200	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Radius of Gyration about X-X))	-	200	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Radius of Gyration about Y-Y))	-	200	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Elastic Modulus))	-	200	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Elastic Modulus about X-X))	-	200	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Elastic Modulus about Y-Y))	-	200	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Plastic Modulus))	-	200	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Plastic Modulus about X-X))	-	200	-
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Plastic Modulus about Y-Y))	-	200	-
Cl. 10.1, 14.1, 18.1(Straightness)	-	250	-
Cl. 10.2, Fig 1(Outside dimension (B))	-	250	-
Cl. 10.2, Fig 1(Outside dimension (H))	-	250	-
Cl. 10.2, Fig 1(Outside dimension (T))	-	250	-
Cl. 10.4, Fig 2(Concavity, X1)	-	250	-
Cl. 10.4, Fig 2(Convexity, X2)	-	250	-
Cl. 10.5, Fig 3(Squareness of side)	-	200	-
Cl. 10.6, Fig 4(External Corner Radius)	-	200	-
Cl. 10.7, Fig 5(Total twist, V)	-	200	-
Cl. 15.2, Table 3(Tensile Strength- IS 1608)	-	1000	-
Cl. 15.2, Table 3(Yield Strength- IS 1608)	-	1000	-
Cl. 15.2, Table 3(Elongation- IS 1608)	-	1000	-
Cl. 14.1(Exact Length)	-	200	-
Cl. 14.1(Random Length)	-	200	-
Cl. 14.1(Weight on individual length)	-	200	-
Cl. 14.1(Weight on lots of 10 tonnes min)	-	200	-
Cl. 18, Note 2(Internal Fin Height (Only for Cold Formed))	-	200	-
7(Micro Alloying elements(Nb+V+Ti))	-	500	-
7(Carbon equivalent as CE)	-	500	-
10.4(Concavity/Convexity-SOP MT-23)	-	250	-
10.5(Squareness of corner/Sides-SOP MT-23)	-	200	-
10.6("External corner Radius/ Radii of corners-outside - SOP MT-23")	-	200	-
11(Oiling & Painting - IS 4923)	-	200	-
18.1(Height of the internal weld fin - IS 4923)	-	200	-
10.3(Thickness - IS 4923)	-	200	-
13(Marking)	-	200	-

26 Jul, 2027

-
-

8021

WELL TECH TEST AND RESEARCH CENTER, DERABASSI

9177306

IS 4381 (1967)

Specification for pathological microscope

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(GENERAL REQUIREMENTS)	-	5000	-
5(FUNCTIONAL REQUIREMENTS)	-	5000	-
6.1.1(mechanical tube length)	-	1000	-
6.1.2(squareness)	-	1000	-
6.1.3(centre of the field)	-	1000	-
6.1.4(fine motion screw)	-	500	-
6.1.5(distant object)	-	1000	-
6.1.6(Parfocality)	-	1000	-
6.2.1(Resolving Power and Definition)	-	2000	-
6.2.2(Star)	-	2500	-
6.2.3(Colour)	-	2000	-
6.2.4(Curvature of Field)	-	1000	-
6.2.5(Distortion)	-	1000	-
6.2.6(Clarity of the Field of View)	-	1500	-
6.2.7(Condition of Optics)	-	5000	-
6.2.8(Magnification and Numerical Aperture of Objective)	-	2500	-
6.2.9(Eyepiece Magnification)	-	1000	-
6.2.10(Field Number of Eyepiece)	-	1000	-
6.3.1(Vibration Test)	-	3500	-
7(MARKING)	-	500	-
3(DIMENSION)	-	5000	-
4(GENERAL REQUIREMENTS)	-	5000	-
5(FUNCTIONAL REQUIREMENTS)	-	5000	-
6.1(Mechanical)	-	7500	-
6.2.1(Resolving Power and Definition —)	-	1000	-
6.2.2(Star)	-	2000	-
6.2.3(Colour)	-	1000	-
6.2.4(Curvature of Field)	-	1000	-
6.2.5(Distortion)	-	1000	-
6.2.6(Clarity of the Field of View)	-	1000	-
6.2.7(Condition of Optics —)	-	5000	-
6.2.8(Magnification and Numerical Aperture of Objective)	-	2500	-
6.2.9(Eyepiece Magnification)	-	1000	-
6.2.10(Field Number of Eyepiece)	-	1000	-
6.3.1(Vibration Test —)	-	3500	-
6.3.2(Bump and Shock Test)	-	1	-
7(Marking)	-	500	-
8(Packing)	-	500	-
4(GENERAL REQUIREMENTS)	-	1	REPEATED
5(FUNCTIONAL REQUIREMENTS)	-	1	REPEATED
6.1.1(mechanical tube length)	-	1	REPEATED
6.1.2(squareness)	-	1	REPEATED
6.1.3(centre of the field)	-	1	REPEATED
6.1.4(fine motion screw)	-	1	REPEATED
6.1.5(distant object)	-	1	REPEATED
6.1.6(Parfocality)	-	1	REPEATED
6.2.1(Resolving Power and Definition)	-	1	REPEATED
6.2.2(Star)	-	1	REPEATED
6.2.3(Colour)	-	1	REPEATED
6.2.4(Curvature of Field)	-	1	REPEATED
6.2.5(Distortion)	-	1	REPEATED
6.2.6(Clarity of the Field of View)	-	1	REPEATED
6.2.7(Condition of Optics)	-	1	REPEATED
6.2.8(Magnification and Numerical Aperture of Objective)	-	1	REPEATED
6.2.9(Eyepiece Magnification)	-	1	REPEATED
6.2.10(Field Number of Eyepiece)	-	1	REPEATED
7(MARKING)	-	1	REPEATED
3(DIMENSION)	-	1	REPEATED
4(GENERAL REQUIREMENTS)	-	1	REPEATED
5(FUNCTIONAL REQUIREMENTS)	-	1	REPEATED
6.1(Mechanical)	-	1	REPEATED
6.2.1(Resolving Power and Definition —)	-	1	REPEATED
6.2.2(Star)	-	1	REPEATED
6.2.3(Colour)	-	1	REPEATED
6.2.4(Curvature of Field)	-	1	REPEATED
6.2.5(Distortion)	-	1	REPEATED
6.2.6(Clarity of the Field of View)	-	1	REPEATED
6.2.7(Condition of Optics —)	-	1	REPEATED
6.2.8(Magnification and Numerical Aperture of Objective)	-	1	REPEATED
6.2.9(Eyepiece Magnification)	-	1	REPEATED
6.2.10(Field Number of Eyepiece)	-	1	REPEATED
7(Marking)	-	1	REPEATED
8(Packing)	-	1	REPEATED

30 Mar, 2027

-
Included w.e.f. 10.07.2024 Exclusion: Cl.4.0 (general requirement- Optional glass and Optical cement), Cl.6.3.1 (Vibration test), Cl.6.3.2 (Bump and shock test)

8022

WELL TECH TEST AND RESEARCH CENTER, DERABASSI

9177306

IS 4328 (1967)

Specification for monocular dissecting microscope

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. No.3(General requirement)	-	5000	-
Cl. No.4(Functional requirement)	-	7500	-
Cl. No.5(Test)	-	7500	-
Cl. No.6(Marking)	-	500	-

30 Mar, 2027

-
Included w.e.f 03.06.2024

8023

WELL TECH TEST AND RESEARCH CENTER, DERABASSI

9177306

IS 8275 (1976)

Specification for binocular eyepication for microscope

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
cl. No.3(General requirenment)	-	5000	-
cl. No.4.(Functional requirenment)	-	5000	-
cl. No.5.1(Mechanical test )	-	5000	-
cl. No.5.2(Optical test)	-	7500	-
cl. No.6.(Marking)	-	500	-

30 Mar, 2027

-
Included w.e.f 03.06.2024 Exclusion: Cl.3 (General Requirement)- Optical glass and optical cement

8024

WELL TECH TEST AND RESEARCH CENTER, DERABASSI

9177306

IS 3686 (1966)

Specification for student - Type microscope

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. NO.3(Dimension)	-	5000	-
Cl. NO.4(General requirements)	-	7500	-
Cl. NO.5(Functional requirement)	-	4000	-
Cl. NO.6.1(Mechanical test )	-	4000	-
Cl. NO.6.2(optical Test)	-	8000	-
Cl. NO.7(Marking)	-	500	-

30 Mar, 2027

-
Included w.e.f 03.06.2024 Exclusion: Cl.4 (General Requirement)- Optical glass and optical cement

8025

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 9396 : Part 1 (1987)

Specification for round open top sanitary cans for foods and drinks: Part 1 tinplate (First Revision)

round open top sanitary cans for foods and drinks:

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Tinplate- Carbon %)	-	300	-
3.1(Tinplate- Manganese %)	-	300	-
3.1(Tinplate- Phosphorus %)	-	300	-
3.1(Tinplate- Sulphur %)	-	300	-
3.1(Tinplate- Silicon %)	-	300	-
3.1(Tinplate- Copper %)	-	300	-
3.3(Tin Coating Mass- Body)	-	2000	-
3.3(Tin Coating Mass- Ends)	-	2000	-
3.2(Tinplate Thickness and Dimension : Thickness)	-	500	-
3.2(Tinplate Thickness and Dimension : Feather Edge: the thickness when measured at a distance of 10 mm from the mill trimmed edge shall not deviate from the actual centre thickness by more than −6 %)	-	500	-
3.2(Tinplate Thickness and Dimension: width)	-	500	-
3.2(Tinplate Thickness and Dimension : length)	-	500	-
3.2(Tinplate Thickness and Dimension : Edge camber)	-	500	-
3.2(Tinplate Thickness and Dimension :Out of squareness of sheet )	-	500	-
3.2(Tinplate Thickness and Dimension : Flatness)	-	500	-
3.4(Surface Finish)	-	2000	-
3.4(Surface Finish)	-	2000	-
3.5 Appendix A(Tin Grain Size)	-	2000	-
3.6 Appendix B(Iron Solution Value)	-	2000	-
3.7(Surface Oil Coating)	-	1000	-
3.9(Shape)	-	700	-
3.1O(Mechanical Properties )	-	3000	-
3.1O(Mechanical Properties )	-	3000	-

31 Dec, 2026

-
Included w.e.f. 15.04.2024

8026

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 11890 (1987)

Specification for high purity primary aluminium ingots for remelting for special applications

6100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. No.3(SUPPLY OF YATERIAL)	-	100	5% discount for BIS
Cl. No.4(MANUFACTURE)	-	100	5% discount for BIS
Cl. No.5(GRADES)	-	100	5% discount for BIS
Cl. No.6.1,Table no. 1(i)(Aluminium,)	-	500	5% discount for BIS
Cl. No.6.1,Table no. 1(ii)(Copper)	-	500	5% discount for BIS
Cl. No.6.1,Table no. 1(iii)(Silicon)	-	500	5% discount for BIS
Cl. No.6.1,Table no. 1(iv)(Iron)	-	500	5% discount for BIS
Cl. No.6.1,Table no. 1(v)(Manganese)	-	500	5% discount for BIS
Cl. No.6.1,Table no. 1(vi)(Magnesium)	-	500	5% discount for BIS
Cl. No.6.1,Table no. 1(vii)(Zinc)	-	500	5% discount for BIS
Cl. No.6.1,Table no. 1(viii)(Titanium + Vanadium)	-	500	5% discount for BIS
Cl. No.6.1,Table no. 1(ix)(Gallium)	-	500	5% discount for BIS
Cl. No.6.1,Table no. 1(x)(Other elements)	-	300	5% discount for BIS
Cl. No.7(SHAPES AND SIZES)	-	300	5% discount for BIS
Cl. No.8(SELECTION OF SAMPLES FOR ANALYSIS)	-	100	5% discount for BIS
Cl. No.9(MARKING)	-	100	5% discount for BIS

26 Jul, 2027

-
-

8027

Hari Shankar Singhania Elastomer and Tyre Research Institute, HASETRI, Mysuru

6183136

IS 15704 (2018)

Automotive vehicles - Retreaded pneumatic tyres for commercial vehicles - Specification (First Revision)

Retreaded Pneumatic Tyres for Commercial Vehicles

84375 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Conditions Before Retreading)	-	0	-
4.2(Preparation)	-	0	-
4.3(Retreading)	-	0	-
4.4(Inspection)	-	0	-
5(TYRE DIMENSIONS)	-	6250	Test Charges includes Section Width, Outer Diameter, Tread Wear Indicator (TWI) & Marking.
6(Endurance Test)	-	75000	-
7(Load/Speed Performance Test)	-	18500	-
8(Marking)	-	0	Test Charges already included in Tyre Dimension Test.
4.1(Conditions Before Retreading)	-	0	-
4.2(Preparation)	-	0	-
4.2(Preparation)	-	0	-
4.3(Retreading)	-	0	-
4.4(Inspection)	-	0	-
6(Endurance Test)	-	75000	-
7(Load/Speed Performance Test)	-	18500	-
8(Marking)	-	0	-

02 Dec, 2027

-
Exclusion: Cl 4.1 (Conditions Before Retreading) Cl 4.2 (Preparation) Cl 4.3 (Retreading) Cl 4.4 (Inspection)

8028

Alpha Test House Private Limited, Delhi

8131026

IS 16614 : Part 2 (2022)

Double-Capped LED Linear Lamps Part 2 Performance Specification

195000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Requirements on Tests)	-	1000	-
5(Marking)	-	3000	-
6(Dimensions)	-	4000	-
7.1(General Test Conditions)	-	1000	-
7.2(Creation of LED Lamp Families to reduce test effort)	-	1000	-
8.1(Lamp Power)	-	3000	-
8.2(Power Factor)	-	1000	-
8.3(Harmonics)	-	4000	-
9.1(Luminous Flux)	-	5000	-
9.2(Luminous intensity distribution, peak intensity and beam angle)	-	5000	-
9.3(Luminous Efficacy)	-	5000	-
10(COLORIMETRIC CHARACTERISTICS)	-	5000	-
11(Lamp Life)	-	155000	-
12(Dimming)	-	0	-
14.1(Type Tests)	-	1000	-
14.2(Acceptance Tests)	-	1000	-
4(General Requirements on Tests)	-	1000	-
5(Marking)	-	3000	-
6(Dimensions)	-	4000	-
7.1(General Test Conditions)	-	1000	-
7.2(Creation of LED Lamp Families to reduce test effort)	-	1000	-
8.1(Lamp Power)	-	3000	-
8.2(Power Factor)	-	1000	-
8.3(Harmonics)	-	4000	-
9.1(Luminous Flux)	-	5000	-
9.2(Luminous intensity distribution, peak intensity and beam angle)	-	5000	-
9.3(Luminous Efficacy)	-	5000	-
10(COLORIMETRIC CHARACTERISTICS)	-	5000	-
11(Lamp Life)	-	155000	-
12(Dimming)	-	0	-
14.1(Type Tests)	-	1000	-
14.2(Acceptance Tests)	-	1000	-

17 May, 2027

-
Included w.e.f. 10.07.2024 Exclusion: Cl.8.4 (Emission of Radio Frequency Disturbances)

8029

ATCC TEST LABS LLP

8172626

IS 302 : Part 2 : Sec 9 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 9 toasters, grills, roasters and similar appliances (First Revision)

20500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.31(Verification)	-	1000	-
Cl.30(Verification)	-	1000	-
CL.29(Verification)	-	1000	-
Cl.28(Verification)	-	1000	-
Cl.27(Verification)	-	1000	-
Cl.26(Verification)	-	1000	-
Cl.25(Verification)	-	1000	-
Cl.23(Verification)	-	1000	-
Cl.22(Verification)	-	1000	-
Cl.21(Verification)	-	1000	-
Cl.20(Verification)	-	1000	-
Cl.19(Verification)	-	1000	-
Cl. 16(Verification)	-	1000	-
Cl.15.1(Moisture Resistance)	-	1000	-
Cl.14(Verification)	-	1000	-
Cl.13(Verification)	-	1000	-
Cl.11(Verification)	-	1000	-
Cl.10(Verification)	-	1000	-
Cl.8(Verification)	-	1000	-
Cl. 7(Verification)	-	1000	-
Cl. 6(Classification- IS 302-1)	-	1000	-
Cl. 31 IS 302-2-9(Resistance To Rusting )	-	1000	-
Cl. 30 IS 302-2-9(Resistance To Heat, Fire And Tracking)	-	1000	-
Cl. 29 IS 302-2-9(Creepage Distances, Clearances And Distances Through Insulation)	-	1000	-
Cl. 28 IS 302-2-9(Screws and Connections)	-	1000	-
Cl. 27 IS 302-2-9(Provision For Earthing )	-	1000	-
Cl. 26 IS 302-2-9(Terminal For External Conductors )	-	1000	-
Cl. 25 IS 302-2-9(Supply Connections and External Flexible Cables and Cords )	-	1000	-
Cl. 24 IS 302-2-9(Components)	-	1000	-
Cl. 23 IS 302-2-9(Internal Wiring)	-	1000	-
Cl. 22 IS 302-2-9(Construction )	-	1000	-
Cl. 21 IS 302-2-9(Mechanical Strength)	-	1000	-
Cl. 20 IS 302-2-9(Stability and mechanical Hazards)	-	1000	-
Cl. 19 IS 302-2-9(Abnormal Operation )	-	1000	-
Cl. 18 IS 302-2-9(Endurance)	-	1000	-
Cl. 17 IS 302-2-9(Overload protection of transformers and associated circuits.)	-	1000	-
Cl. 16 IS 302-2-9(Leakage Current and Electric strength )	-	1000	-
Cl. 15 IS 302-2-9(Moisture Resistance)	-	1000	-
Cl. 14 IS 302-2-9(Transient overvoltage)	-	1000	-
Cl. 13.3 IS 302-2-9(Leakage Current & Electric Strength at Operating Temperature)	-	1000	-
Cl. 11 IS 302-2-9(Heating)	-	1000	-
Cl. 10 IS 302-2-9(Power Input and Current )	-	1000	-
Cl. 9 IS 302-2-9(Starting of motor operated appliances)	-	1000	-
Cl. 8 IS 302-2-9(Protection against access to live parts)	-	1000	-
Cl. 7 IS 302-2-9(Marking and Instruction)	-	1000	-
Cl. 6 IS 302-2-9(Classification- IS 302-1)	-	1000	-
31(Resistance to rusting)	-	1000	-
30.2.4(Resistance to heat and fire)	-	1000	-
30.2(Resistance to heat and fire)	-	1000	-
30.1(Resistance to heat and fire)	-	1000	-
29.3(Clearances, creepage distances and solid insulation)	-	1000	-
29.2(Clearances, creepage distances and solid insulation)	-	1000	-
29.2(Clearances, creepage distances and solid insulation)	-	1000	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	1000	-
28.2 to 28.4(Screws and connections)	-	1000	-
28.1, Table No.-14(Screws and connections)	-	1000	-
27.6(Provision for earthing)	-	1000	-
27.5(Provision for earthing)	-	1000	-
27.1 to 27.4(Provision for earthing)	-	1000	-
26.10 & 26.11(Terminals for external conductors)	-	1000	-
26.9(Terminals for external conductors)	-	1000	-
26.1 to 26.8(Terminals for external conductors)	-	1000	-
25.16 to 25.25(Supply connection and external flexible cords)	-	1000	-
25.15(Supply connection and external flexible cords)	-	1000	-
25.14(Supply connection and external flexible cords)	-	1000	-
25.14(Supply connection and external flexible cords)	-	1000	-
25.9 to 25.13(Supply connection and external flexible cords)	-	1000	-
25.8, Table No.-11(Supply connection and external flexible cords)	-	1000	-
25.5 to 25.7(Supply connection and external flexible cords)	-	1000	-
25.4(Supply connection and external flexible cords)	-	1000	-
25.3(Supply connection and external flexible cords)	-	1000	-
25.2(Supply connection and external flexible cords)	-	1000	-
25.1(Supply connection and external flexible cords)	-	1000	-
24.101(Components)	-	1000	-
24.101(Components)	-	1000	-
24.2 to 24.6(Components)	-	1000	-
24.1(Components)	-	1000	-
23.6 to 23.10(Internal wiring)	-	1000	-
23.5(Internal wiring)	-	1000	-
23.4(Internal wiring)	-	1000	-
23.3(Internal wiring)	-	1000	-
23.1 & 23.2(Internal wiring)	-	1000	-
22.111(Constructions)	-	1000	-
22.111(Constructions)	-	1000	-
22.11o(Constructions)	-	1000	-
22.109(Constructions)	-	1000	-
22.108(Constructions)	-	1000	-
22.101 to 22.107(Constructions)	-	1000	-
22.13 to 22.48(Constructions)	-	1000	-
22.12(Constructions)	-	1000	-
22.11(Constructions)	-	1000	-
22.11(Constructions)	-	1000	-
22.7 to 22.10(Constructions)	-	1000	-
22.6(Constructions)	-	1000	-
22.5(Constructions)	-	1000	-
22.4(Constructions)	-	1000	-
22.3(Constructions)	-	1000	-
22.2(Constructions)	-	1000	-
22.1(Constructions)	-	1000	-
21.101(MECHANICAL STRENGTH)	-	1000	-
21.101(MECHANICAL STRENGTH)	-	1000	-
21.2(MECHANICAL STRENGTH)	-	1000	-
21.1(MECHANICAL STRENGTH)	-	1000	-
20.2(Stability and mechanical hazards)	-	1000	-
20.1(Stability and mechanical hazards)	-	1000	-
19.104(ABNORMAL OPERATION)	-	1000	-
19.103(ABNORMAL OPERATION)	-	1000	-
19.102(ABNORMAL OPERATION)	-	1000	-
19.101(ABNORMAL OPERATION)	-	1000	-
19.1 to 19.13, Table No. - 9(ABNORMAL OPERATION)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
16.3(Insulation resistance test)	-	1000	-
16.3(Electric strength test)	-	1000	-
16.1 & 16.2(Leakage current test)	-	1000	-
15.3(Moisture resistance)	-	1000	-
15.3(Moisture resistance)	-	1000	-
15.3(Moisture resistance)	-	1000	-
15.2(Moisture resistance)	-	1000	-
15.2(Moisture resistance)	-	1000	-
15.2(Moisture resistance)	-	1000	-
15.2(Moisture resistance)	-	1000	-
15.1(Moisture resistance)	-	1000	-
14, Table No.- 6 & Table No.-16(Transient over voltages)	-	1000	-
13.3 and Table No.- 4(Electric strength test)	-	1000	-
13.1, 13.2(Leakage current test)	-	1000	-
13.1, 13.2(Leakage current test)	-	1000	-
11.101(Heating)	-	1000	-
11.1 to 11.8, Table No.-3(Heating)	-	1000	-
10.1 & 10.2 -Table No. 1, Table No. 2(Power Input and Current)	-	1000	-
8.1.5(Protection against access to live parts)	-	1000	-
8.1.4(Protection against access to live parts)	-	1000	-
8.1.3(Protection against access to live parts)	-	1000	-
8.1.2(Protection against access to live parts)	-	1000	-
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	1000	-
7.14(Legibility & Durability of Markings test)	-	1000	-
7.1 to 7.13, 7.15, 7.16(Marking)	-	1000	-
32(Radiation, toxicity and similar hazards)	-	1000	-
31(Resistance to rusting)	-	1000	-
31(Resistance to rusting)	-	1000	-
30.2.4(Resistance to heat and fire)	-	1000	-
30.2(Resistance to heat and fire)	-	1000	-
30.1(Resistance to heat and fire)	-	1000	-
29.3(Clearances, creepage distances and solid insulation)	-	1000	-
29.2(Clearances, creepage distances and solid insulation)	-	1000	-
29.2(Clearances, creepage distances and solid insulation)	-	1000	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	1000	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	1000	-
28.2 to 28.4(Screws and connections)	-	1000	-
28.1, Table No.-14(Screws and connections)	-	1000	-
27.6(Provision for earthing)	-	1000	-
27.5(Provision for earthing)	-	1000	-
27.1 to 27.4(Provision for earthing)	-	1000	-
26.10 & 26.11(Terminals for external conductors)	-	1000	-
26.9(Terminals for external conductors)	-	1000	-
26.1 to 26.8(Terminals for external conductors)	-	1000	-
25.16 to 25.25(Supply connection and external flexible cords)	-	1000	-
25.15(Supply connection and external flexible cords)	-	1000	-
25.14(Supply connection and external flexible cords)	-	1000	-
25.14(Supply connection and external flexible cords)	-	1000	-
25.9 to 25.13(Supply connection and external flexible cords)	-	1000	-
25.8, Table No.-11(Supply connection and external flexible cords)	-	1000	-
25.5 to 25.7(Supply connection and external flexible cords)	-	1000	-
25.4(Supply connection and external flexible cords)	-	1000	-
25.3(Supply connection and external flexible cords)	-	1000	-
25.2(Supply connection and external flexible cords)	-	1000	-
25.1(Supply connection and external flexible cords)	-	1000	-
24.101(Components)	-	1000	-
24.101(Components)	-	1000	-
24.2 to 24.6(Components)	-	1000	-
24.1(Components)	-	1000	-
23.6 to 23.10(Internal wiring)	-	1000	-
23.5(Internal wiring)	-	1000	-
23.4(Internal wiring)	-	1000	-
23.3(Internal wiring)	-	1000	-
23.1 & 23.2(Internal wiring)	-	1000	-
22.111(Constructions)	-	1000	-
22.111(Constructions)	-	1000	-
22.11o(Constructions)	-	1000	-
22.109(Constructions)	-	1000	-
22.108(Constructions)	-	1000	-
22.101 to 22.107(Constructions)	-	1000	-
22.13 to 22.48(Constructions)	-	1000	-
22.12(Constructions)	-	1000	-
22.11(Constructions)	-	1000	-
22.11(Constructions)	-	1000	-
22.7 to 22.10(Constructions)	-	1000	-
22.6(Constructions)	-	1000	-
22.5(Constructions)	-	1000	-
22.4(Constructions)	-	1000	-
22.3(Constructions)	-	1000	-
22.2(Constructions)	-	1000	-
22.1(Constructions)	-	1000	-
21.101(MECHANICAL STRENGTH)	-	1000	-
21.101(MECHANICAL STRENGTH)	-	1000	-
21.2(MECHANICAL STRENGTH)	-	1000	-
21.1(MECHANICAL STRENGTH)	-	1000	-
20.2(Stability and mechanical hazards)	-	1000	-
20.1(Stability and mechanical hazards)	-	1000	-
19.104(ABNORMAL OPERATION)	-	1000	-
19.103(ABNORMAL OPERATION)	-	1000	-
19.102(ABNORMAL OPERATION)	-	1000	-
19.101(ABNORMAL OPERATION)	-	1000	-
19.1 to 19.13, Table No. - 9(ABNORMAL OPERATION)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
16.3(Insulation resistance test)	-	1000	-
16.3(Electric strength test)	-	1000	-
16.1 & 16.2(Leakage current test)	-	1000	-
15.3(Moisture resistance)	-	1000	-
15.3(Moisture resistance)	-	1000	-
15.3(Moisture resistance)	-	1000	-
15.2(Moisture resistance)	-	1000	-
15.2(Moisture resistance)	-	1000	-
15.2(Moisture resistance)	-	1000	-
15.2(Moisture resistance)	-	1000	-
15.1(Moisture resistance)	-	1000	-
14, Table No.- 6 & Table No.-16(Transient over voltages)	-	1000	-
13.3 and Table No.- 4(Electric strength test)	-	1000	-
13.1, 13.2(Leakage current test)	-	1000	-
13.1, 13.2(Leakage current test)	-	1000	-
11.101(Heating)	-	1000	-
11.1 to 11.8, Table No.-3(Heating)	-	1000	-
10.1 & 10.2 -Table No. 1, Table No. 2(Power Input and Current)	-	1000	-
8.1.5(Protection against access to live parts)	-	1000	-
8.1.4(Protection against access to live parts)	-	1000	-
8.1.3(Protection against access to live parts)	-	1000	-
8.1.2(Protection against access to live parts)	-	1000	-
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	1000	-
7.14(Legibility & Durability of Markings test)	-	1000	-
7.1 to 7.13, 7.15, 7.16(Marking)	-	1000	-
32(Radiation ,Toxicity and similar hazards)	-	1000	-
31(Resistance to Rusting)	-	1000	-
30(Resistance to Heat & Fire)	-	1000	-
29(Clearances, Creepage Distances & Solid Insulation)	-	1000	-
28(Screws & Connections)	-	1000	-
27(Provision For Earthing)	-	1000	-
26(Terminals For External Conductors)	-	1000	-
25(Supply Connection & External Flexible Cords)	-	1000	-
24(Components)	-	1000	-
23(Internal wiring)	-	1000	-
22(Construction)	-	1000	-
21(Mechanical strength)	-	1000	-
20(Stability & Mechanical Hazards)	-	1000	-
19(Abnormal Operation)	-	1000	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	1000	-
16(Leakage Current and Electric Strength)	-	1000	-
15(Moisture Resistance)	-	1000	-
14(Transient Over Voltage)	-	1000	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	1000	-
11(Temperature Rise/ Heating)	-	1000	-
10(Power Input & Current)	-	1000	-
9(Starting Of Motor Operated Appliances)	-	1000	-
8(Protection against access to live parts)	-	1000	-
32(Radiation ,Toxicity and similar hazards)	-	1000	-
31(Resistance to Rusting)	-	1000	-
30(Resistance to Heat & Fire)	-	1000	-
29(Clearances, Creepage Distances & Solid Insulation)	-	1000	-
28(Screws & Connections)	-	1000	-
27(Provision For Earthing)	-	1000	-
26(Terminals For External Conductors)	-	1000	-
25(Supply Connection & External Flexible Cords)	-	1000	-
24(Components)	-	1000	-
23(Internal wiring)	-	1000	-
22(Construction)	-	1000	-
21(Mechanical strength)	-	1000	-
20(Stability & Mechanical Hazards)	-	1000	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	1000	-
16(Leakage Current and Electric Strength)	-	1000	-
15(Moisture Resistance)	-	1000	-
14(Transient Over Voltage)	-	1000	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	1000	-
11(Temperature Rise/ Heating)	-	1000	-
10(Power Input & Current)	-	1000	-
9(Starting Of Motor Operated Appliances)	-	1000	-
8(Protection against access to live parts)	-	1000	-
Cl.32(Verification)	-	1000	-
Cl. 32 IS 302-2-9(Radiation, Toxicity and similar hazards)	-	1000	-
32(Radiation, toxicity and similar hazards)	-	1000	-
31(Resistance to rusting)	-	1000	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	1000	-
Cl.24(Verification)	-	1000	-
19.11.4.4(Surge immunity test)	-	1000	-
19.11.4.7(Harmonics)	-	1000	-
19(Abnormal Operation)	-	1000	-
Cl. 31 IS 302-2-9(Resistance To Rusting )	-	1000	-
Cl. 30 IS 302-2-9(Resistance To Heat, Fire And Tracking)	-	1000	-
Cl. 29 IS 302-2-9(Creepage Distances, Clearances And Distances Through Insulation)	-	1000	-
Cl. 28 IS 302-2-9(Screws and Connections)	-	1000	-
Cl. 27 IS 302-2-9(Provision For Earthing )	-	1000	-
Cl. 26 IS 302-2-9(Terminal For External Conductors )	-	1000	-
Cl. 25 IS 302-2-9(Supply Connections and External Flexible Cables and Cords )	-	1000	-
Cl. 24 IS 302-2-9(Components)	-	1000	-
Cl. 23 IS 302-2-9(Internal Wiring)	-	1000	-
Cl. 22 IS 302-2-9(Construction )	-	1000	-
Cl. 21 IS 302-2-9(Mechanical Strength)	-	1000	-
Cl. 20 IS 302-2-9(Stability and mechanical Hazards)	-	1000	-
Cl. 19 IS 302-2-9(Abnormal Operation )	-	1000	-
Cl. 18 IS 302-2-9(Endurance)	-	1000	-
Cl. 17 IS 302-2-9(Overload protection of transformers and associated circuits.)	-	1000	-
Cl. 16 IS 302-2-9(Leakage Current and Electric strength )	-	1000	-
Cl. 15 IS 302-2-9(Moisture Resistance)	-	1000	-
Cl. 14 IS 302-2-9(Transient overvoltage)	-	1000	-
Cl. 13.3 IS 302-2-9(Leakage Current & Electric Strength at Operating Temperature)	-	1000	-
Cl. 11 IS 302-2-9(Heating)	-	1000	-
Cl. 10 IS 302-2-9(Power Input and Current )	-	1000	-
Cl. 9 IS 302-2-9(Starting of motor operated appliances)	-	1000	-
Cl. 8 IS 302-2-9(Protection against access to live parts)	-	1000	-
Cl. 7 IS 302-2-9(Marking and Instruction)	-	1000	-
Cl. 6 IS 302-2-9(Classification- IS 302-1)	-	1000	-
31(Resistance to rusting)	-	1000	-
30.2.4(Resistance to heat and fire)	-	1000	-
30.2(Resistance to heat and fire)	-	1000	-
30.1(Resistance to heat and fire)	-	1000	-
29.3(Clearances, creepage distances and solid insulation)	-	1000	-
29.2(Clearances, creepage distances and solid insulation)	-	1000	-
29.2(Clearances, creepage distances and solid insulation)	-	1000	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	1000	-
28.2 to 28.4(Screws and connections)	-	1000	-
28.1, Table No.-14(Screws and connections)	-	1000	-
27.6(Provision for earthing)	-	1000	-
27.5(Provision for earthing)	-	1000	-
27.1 to 27.4(Provision for earthing)	-	1000	-
26.10 & 26.11(Terminals for external conductors)	-	1000	-
26.9(Terminals for external conductors)	-	1000	-
26.1 to 26.8(Terminals for external conductors)	-	1000	-
25.16 to 25.25(Supply connection and external flexible cords)	-	1000	-
25.15(Supply connection and external flexible cords)	-	1000	-
25.14(Supply connection and external flexible cords)	-	1000	-
25.14(Supply connection and external flexible cords)	-	1000	-
25.9 to 25.13(Supply connection and external flexible cords)	-	1000	-
25.8, Table No.-11(Supply connection and external flexible cords)	-	1000	-
25.5 to 25.7(Supply connection and external flexible cords)	-	1000	-
25.4(Supply connection and external flexible cords)	-	1000	-
25.3(Supply connection and external flexible cords)	-	1000	-
25.2(Supply connection and external flexible cords)	-	1000	-
25.1(Supply connection and external flexible cords)	-	1000	-
24.101(Components)	-	1000	-
24.101(Components)	-	1000	-
24.2 to 24.6(Components)	-	1000	-
24.1(Components)	-	1000	-
23.6 to 23.10(Internal wiring)	-	1000	-
23.5(Internal wiring)	-	1000	-
23.4(Internal wiring)	-	1000	-
23.3(Internal wiring)	-	1000	-
23.1 & 23.2(Internal wiring)	-	1000	-
22.111(Constructions)	-	1000	-
22.111(Constructions)	-	1000	-
22.11o(Constructions)	-	1000	-
22.109(Constructions)	-	1000	-
22.108(Constructions)	-	1000	-
22.101 to 22.107(Constructions)	-	1000	-
22.13 to 22.48(Constructions)	-	1000	-
22.12(Constructions)	-	1000	-
22.11(Constructions)	-	1000	-
22.11(Constructions)	-	1000	-
22.7 to 22.10(Constructions)	-	1000	-
22.6(Constructions)	-	1000	-
22.5(Constructions)	-	1000	-
22.4(Constructions)	-	1000	-
22.3(Constructions)	-	1000	-
22.2(Constructions)	-	1000	-
22.1(Constructions)	-	1000	-
21.101(MECHANICAL STRENGTH)	-	1000	-
21.101(MECHANICAL STRENGTH)	-	1000	-
21.2(MECHANICAL STRENGTH)	-	1000	-
21.1(MECHANICAL STRENGTH)	-	1000	-
20.2(Stability and mechanical hazards)	-	1000	-
20.1(Stability and mechanical hazards)	-	1000	-
19.104(ABNORMAL OPERATION)	-	1000	-
19.103(ABNORMAL OPERATION)	-	1000	-
19.102(ABNORMAL OPERATION)	-	1000	-
19.101(ABNORMAL OPERATION)	-	1000	-
19.1 to 19.13, Table No. - 9(ABNORMAL OPERATION)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
16.3(Insulation resistance test)	-	1000	-
16.3(Electric strength test)	-	1000	-
16.1 & 16.2(Leakage current test)	-	1000	-
15.3(Moisture resistance)	-	1000	-
15.3(Moisture resistance)	-	1000	-
15.3(Moisture resistance)	-	1000	-
15.2(Moisture resistance)	-	1000	-
15.2(Moisture resistance)	-	1000	-
15.2(Moisture resistance)	-	1000	-
15.2(Moisture resistance)	-	1000	-
15.1(Moisture resistance)	-	1000	-
14, Table No.- 6 & Table No.-16(Transient over voltages)	-	1000	-
13.3 and Table No.- 4(Electric strength test)	-	1000	-
13.1, 13.2(Leakage current test)	-	1000	-
13.1, 13.2(Leakage current test)	-	1000	-
11.101(Heating)	-	1000	-
11.1 to 11.8, Table No.-3(Heating)	-	1000	-
10.1 & 10.2 -Table No. 1, Table No. 2(Power Input and Current)	-	1000	-
8.1.5(Protection against access to live parts)	-	1000	-
8.1.4(Protection against access to live parts)	-	1000	-
8.1.3(Protection against access to live parts)	-	1000	-
8.1.2(Protection against access to live parts)	-	1000	-
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	1000	-
7.14(Legibility & Durability of Markings test)	-	1000	-
7.1 to 7.13, 7.15, 7.16(Marking)	-	1000	-
32(Radiation, toxicity and similar hazards)	-	1000	-
31(Resistance to rusting)	-	1000	-
31(Resistance to rusting)	-	1000	-
30.2.4(Resistance to heat and fire)	-	1000	-
30.2(Resistance to heat and fire)	-	1000	-
30.1(Resistance to heat and fire)	-	1000	-
29.3(Clearances, creepage distances and solid insulation)	-	1000	-
29.2(Clearances, creepage distances and solid insulation)	-	1000	-
29.2(Clearances, creepage distances and solid insulation)	-	1000	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	1000	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	1000	-
28.2 to 28.4(Screws and connections)	-	1000	-
28.1, Table No.-14(Screws and connections)	-	1000	-
27.6(Provision for earthing)	-	1000	-
27.5(Provision for earthing)	-	1000	-
27.1 to 27.4(Provision for earthing)	-	1000	-
26.10 & 26.11(Terminals for external conductors)	-	1000	-
26.9(Terminals for external conductors)	-	1000	-
26.1 to 26.8(Terminals for external conductors)	-	1000	-
25.16 to 25.25(Supply connection and external flexible cords)	-	1000	-
25.15(Supply connection and external flexible cords)	-	1000	-
25.14(Supply connection and external flexible cords)	-	1000	-
25.14(Supply connection and external flexible cords)	-	1000	-
25.9 to 25.13(Supply connection and external flexible cords)	-	1000	-
25.8, Table No.-11(Supply connection and external flexible cords)	-	1000	-
25.5 to 25.7(Supply connection and external flexible cords)	-	1000	-
25.4(Supply connection and external flexible cords)	-	1000	-
25.3(Supply connection and external flexible cords)	-	1000	-
25.2(Supply connection and external flexible cords)	-	1000	-
25.1(Supply connection and external flexible cords)	-	1000	-
24.101(Components)	-	1000	-
24.101(Components)	-	1000	-
24.2 to 24.6(Components)	-	1000	-
24.1(Components)	-	1000	-
23.6 to 23.10(Internal wiring)	-	1000	-
23.5(Internal wiring)	-	1000	-
23.4(Internal wiring)	-	1000	-
23.3(Internal wiring)	-	1000	-
23.1 & 23.2(Internal wiring)	-	1000	-
22.111(Constructions)	-	1000	-
22.111(Constructions)	-	1000	-
22.11o(Constructions)	-	1000	-
22.109(Constructions)	-	1000	-
22.108(Constructions)	-	1000	-
22.101 to 22.107(Constructions)	-	1000	-
22.13 to 22.48(Constructions)	-	1000	-
22.12(Constructions)	-	1000	-
22.11(Constructions)	-	1000	-
22.11(Constructions)	-	1000	-
22.7 to 22.10(Constructions)	-	1000	-
22.6(Constructions)	-	1000	-
22.5(Constructions)	-	1000	-
22.4(Constructions)	-	1000	-
22.3(Constructions)	-	1000	-
22.2(Constructions)	-	1000	-
22.1(Constructions)	-	1000	-
21.101(MECHANICAL STRENGTH)	-	1000	-
21.101(MECHANICAL STRENGTH)	-	1000	-
21.2(MECHANICAL STRENGTH)	-	1000	-
21.1(MECHANICAL STRENGTH)	-	1000	-
20.2(Stability and mechanical hazards)	-	1000	-
20.1(Stability and mechanical hazards)	-	1000	-
19.104(ABNORMAL OPERATION)	-	1000	-
19.103(ABNORMAL OPERATION)	-	1000	-
19.102(ABNORMAL OPERATION)	-	1000	-
19.101(ABNORMAL OPERATION)	-	1000	-
19.1 to 19.13, Table No. - 9(ABNORMAL OPERATION)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
16.3(Insulation resistance test)	-	1000	-
16.3(Electric strength test)	-	1000	-
16.1 & 16.2(Leakage current test)	-	1000	-
15.3(Moisture resistance)	-	1000	-
15.3(Moisture resistance)	-	1000	-
15.3(Moisture resistance)	-	1000	-
15.2(Moisture resistance)	-	1000	-
15.2(Moisture resistance)	-	1000	-
15.2(Moisture resistance)	-	1000	-
15.2(Moisture resistance)	-	1000	-
15.1(Moisture resistance)	-	1000	-
14, Table No.- 6 & Table No.-16(Transient over voltages)	-	1000	-
13.3 and Table No.- 4(Electric strength test)	-	1000	-
13.1, 13.2(Leakage current test)	-	1000	-
13.1, 13.2(Leakage current test)	-	1000	-
11.101(Heating)	-	1000	-
11.1 to 11.8, Table No.-3(Heating)	-	1000	-
10.1 & 10.2 -Table No. 1, Table No. 2(Power Input and Current)	-	1000	-
8.1.5(Protection against access to live parts)	-	1000	-
8.1.4(Protection against access to live parts)	-	1000	-
8.1.3(Protection against access to live parts)	-	1000	-
8.1.2(Protection against access to live parts)	-	1000	-
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	1000	-
7.14(Legibility & Durability of Markings test)	-	1000	-
7.1 to 7.13, 7.15, 7.16(Marking)	-	1000	-
32(Radiation ,Toxicity and similar hazards)	-	1000	-
31(Resistance to Rusting)	-	1000	-
30(Resistance to Heat & Fire)	-	1000	-
29(Clearances, Creepage Distances & Solid Insulation)	-	1000	-
28(Screws & Connections)	-	1000	-
27(Provision For Earthing)	-	1000	-
26(Terminals For External Conductors)	-	1000	-
25(Supply Connection & External Flexible Cords)	-	1000	-
24(Components)	-	1000	-
23(Internal wiring)	-	1000	-
22(Construction)	-	1000	-
21(Mechanical strength)	-	1000	-
20(Stability & Mechanical Hazards)	-	1000	-
19(Abnormal Operation)	-	1000	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	1000	-
16(Leakage Current and Electric Strength)	-	1000	-
15(Moisture Resistance)	-	1000	-
14(Transient Over Voltage)	-	1000	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	1000	-
11(Temperature Rise/ Heating)	-	1000	-
10(Power Input & Current)	-	1000	-
9(Starting Of Motor Operated Appliances)	-	1000	-
8(Protection against access to live parts)	-	1000	-
32(Radiation ,Toxicity and similar hazards)	-	1000	-
31(Resistance to Rusting)	-	1000	-
30(Resistance to Heat & Fire)	-	1000	-
29(Clearances, Creepage Distances & Solid Insulation)	-	1000	-
28(Screws & Connections)	-	1000	-
27(Provision For Earthing)	-	1000	-
26(Terminals For External Conductors)	-	1000	-
25(Supply Connection & External Flexible Cords)	-	1000	-
24(Components)	-	1000	-
23(Internal wiring)	-	1000	-
22(Construction)	-	1000	-
21(Mechanical strength)	-	1000	-
20(Stability & Mechanical Hazards)	-	1000	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	1000	-
16(Leakage Current and Electric Strength)	-	1000	-
15(Moisture Resistance)	-	1000	-
14(Transient Over Voltage)	-	1000	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	1000	-
11(Temperature Rise/ Heating)	-	1000	-
10(Power Input & Current)	-	1000	-
9(Starting Of Motor Operated Appliances)	-	1000	-
8(Protection against access to live parts)	-	1000	-
Cl. 32 IS 302-2-9(Radiation, Toxicity and similar hazards)	-	1000	-
32(Radiation, toxicity and similar hazards)	-	1000	-
31(Resistance to rusting)	-	1000	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	1000	-
19.11.4.4(Surge immunity test)	-	1000	-
19.11.4.7(Harmonics)	-	1000	-
19(Abnormal Operation)	-	1000	-

15 Jun, 2026

-
Included w.e.f. 07.05.2024 Exclusion: Cl.19.11.4.1 (Electrostatic discharges), Cl. 19.11.4.2 (Radiated fields), Cl. 19.11.4.3 (Fast transient bursts), Cl. 19.11.4.6 (Class 3 Voltage dips and interruptions), Cl. 19.11.4.5 (Immunity to conducted discharges)

8030

DELHI TEST HOUSE, Azadhpur

8131406

IS 285 (2021)

LAUNDRY SOAPS

ALL

11000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Safety)	-	1000	NA
5.2(Saponification)	-	1000	NA
5.4,table 1 (i)(Total fatty matter,% by mass, Min)	-	1000	NA
5.4,table 1 (ii)(Rosin acids,% by mass of total fatty matter, Max)	-	1000	NA
5.4,table 1 (iii)(Unsaponified fatty matter,% by mass, Max)	-	1000	NA
5.4,table 1 (iv)(Free caustic alkali, as NaOH, % by mass, Max)	-	1000	NA
5.4,table 1 (v)(Matter insoluble in alcohol, % by mass, Max)	-	1000	NA
5.4,table 1 (vi)(Titre of total fatty acids, oC, Min)	-	1000	NA
5.4,table 1 (vii)(Glycerol, % by mass, Max)	-	1000	NA
5.4,table 1 (viii)(Chloride,(as NaCl), % by mass, Max)	-	1000	NA
5.4,table 1 (ix)(LSD/NSD content, % by mass, Max)	-	1000	NA
5.3(Odour & Lathering Properties)	-	500	NA
5.1(Safety)	-	1000	NA
5.2(Saponification)	-	1000	NA
5.4,table 1 (i)(Total fatty matter,% by mass, Min)	-	1000	NA
5.4,table 1 (ii)(Rosin acids,% by mass of total fatty matter, Max)	-	1000	NA
5.4,table 1 (iii)(Unsaponified fatty matter,% by mass, Max)	-	1000	NA
5.4,table 1 (iv)(Free caustic alkali, as NaOH, % by mass, Max)	-	1000	NA
5.4,table 1 (v)(Matter insoluble in alcohol, % by mass, Max)	-	1000	NA
5.4,table 1 (vi)(Titre of total fatty acids, oC, Min)	-	1000	NA
5.4,table 1 (vii)(Glycerol, % by mass, Max)	-	1000	NA
5.4,table 1 (viii)(Chloride,(as NaCl), % by mass, Max)	-	500	NA
5.4,table 1 (ix)(LSD/NSD content, % by mass, Max)	-	1000	NA
5.3(Odour & Lathering Properties)	-	500	NA
5.2(Saponification)	-	-	-
5.4,table 1 (i)(Total fatty matter,% by mass, Min)	-	-	-
5.4,table 1 (ii)(Rosin acids,% by mass of total fatty matter, Max)	-	-	-
5.4,table 1 (iii)(Unsaponified fatty matter,% by mass, Max)	-	-	-
5.4,table 1 (iv)(Free caustic alkali, as NaOH, % by mass, Max)	-	-	-
5.4,table 1 (v)(Matter insoluble in alcohol, % by mass, Max)	-	-	-
5.4,table 1 (vi)(Titre of total fatty acids, oC, Min)	-	-	-
5.4,table 1 (vii)(Glycerol, % by mass, Max)	-	-	-
5.4,table 1 (viii)(Chloride,(as NaCl), % by mass, Max)	-	-	-
5.4,table 1 (ix)(LSD/NSD content, % by mass, Max)	-	-	-
5.3(Odour & Lathering Properties)	-	-	-

17 Jun, 2027

-
Included w.e.f 15.10.2024

8031

Hari Shankar Singhania Elastomer and Tyre Research Institute, HASETRI, Mysuru

6183136

IS 5821 (1986)

Specification for hot - Water hose of rubber (Second Revision)

Hose

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1.1(Lining)	-	500	-
3.1.2(Reinforcement)	-	500	-
3.1.3(Cover)	-	500	-
3.3.1(Bore Size)	-	500	-
3.3.2(Lining and Cover Thickness)	-	500	-
3.3.3(Length Tested as per Cl. No. 4.3.2 of IS : 443 - 1975)	-	500	-
3.4.1(Tensile Strength and Elongation at Break of Lining and Cover)	-	1000	-
3.4.2(Accelerated Ageing)	-	1000	-
3.4.3(Adhesion)	-	1500	-
3.4.4(Hydraulic Pressure)	-	1500	-
3.4.5(Proof Pressure)	-	1000	-
4(Packing and Marking)	-	500	-
6(TIME LAPSE BETWEEN RECEIPT OF MATERIAL AND TESTING)	-	500	-

02 Dec, 2027

-
Exclusion: Cl 3.4.6 (Resistance to Hot Water) Cl 3.4.7 (Water Absorption) Scope restriction: From 10 mm to 25 mm

8032

Hari Shankar Singhania Elastomer and Tyre Research Institute, HASETRI, Mysuru

6183136

IS 637 (2024)

Rubber Tubings for General Purposes â Specification (Third Revision)

Tubings

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Material)	-	500	-
3.2(Dimension)	-	500	-
4(Packing and Marking)	-	500	-
6.2(Test Pieces)	-	500	-
6.3(Tensile Strength and Elongation)	-	1000	-
6.3(Tensile Strength and Elongation)	-	1000	-
6.4.1(Apparatus)	-	500	-
6.4.2(Temperature)	-	500	-
6.4.3(Procedure)	-	1000	-
6.5(Accelerated Ageing)	-	2000	-
6.5(Accelerated Ageing)	-	1000	-
6.6(Resistance to Ageing Under Tension)	-	500	-
6.7(Leakage Test)	-	500	-
Cl-4.1(Materials)	-	500	-
Cl-4.2(Dimension)	-	500	-
Cl-5(Packing and Marking)	-	500	-
Cl-4.3, Table-2 (i)(Tensile strength, kg/cm2, Min)	-	1000	-
Cl-4.4, Table-3 (i)(Stretch, percent, Max)	-	1000	-
Cl-4.5(Accelerated Ageing Test)	-	1000	-
Cl-4.6(Resistance to Ageing Under Tension)	-	1000	-
Cl-4.7(Leakage)	-	1000	-
Cl-4.3, Table-2 (ii)(Elongation at break, percent, Min)	-	1000	-
Cl-4.4, Table-3 (ii)(Tension set, percent, Max)	-	1000	-

02 Dec, 2027

-
Scope restriction: For 5 mm, 8 mm, 10 mm, 12.5 mm only

8033

Hari Shankar Singhania Elastomer and Tyre Research Institute, HASETRI, Mysuru

6183136

IS 9573 : Part 2 (2017)

Rubber hose for liquefied petroleum gas (Lpg) - Specification: Part 2 domestic and commercial application (Fourth Revision)

Hose

19250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4.1(General)	-	250	-
Clause 4.2(Material)	-	250	-
Clause 4.2.1(Lining)	-	250	-
Clause 4.2.2 (a)(Reinforcement)	-	250	-
Clause 4.2.2 (b)(Reinforcement)	-	250	-
Clause 4.2.3(Cover)	-	250	-
Clause 4.3 Sub Clause 4.3.1 Table 1(Bore Size)	-	250	-
Clause 4.3 Sub Clause 4.3.2 (a)(Thickness of Lining and Cover)	-	250	-
Clause 4.3 Sub Clause 4.3.2 (b)(Thickness of Lining and Cover)	-	250	-
Clause 4.3 Sub Clause 4.3.3(Length)	-	250	-
Clause 4.4 Sub Clause 4.4.1 Table 2 (i) (a)(Tensile Strength- Lining)	-	500	-
Clause 4.4 Sub Clause 4.4.1 Table 2 (i) (b)(Tensile Strength- cover)	-	500	-
Clause 4.4 Sub Clause 4.4.1 Table 2 (ii) (a)(Elongation at break- Lining)	-	500	-
Clause 4.4 Sub Clause 4.4.1 Table 2 (ii) (b)(Elongation at break- Cover)	-	500	-
Clause 4.4 Sub Clause 4.4.2 (a)(Accelerated Ageing Test lining)	-	1000	-
Clause 4.4 Sub Clause 4.4.2 (b)(Accelerated Ageing Test lining)	-	1000	-
Clause 4.4 Sub Clause 4.4.2 (a)(Accelerated Ageing Test cover)	-	1000	-
Clause 4.4 Sub Clause 4.4.2 (b)(Accelerated Ageing Test cover)	-	1000	-
Clause 4.5 Sub clause 4.5.1(Adhesion)	-	1000	-
Clause 4.5 Sub clause 4.5.2(Low Temperature Flexibility)	-	1000	-
Clause 4.5 Sub clause 4.5.3(Flexibility of Hose)	-	500	-
Clause 4.5 Sub clause 4.5.4(Ozone Resistance)	-	2000	-
Clause 4.5 Sub clause 4.5.5 4.5.5.1(Proof pressure test)	-	1000	-
Clause 4.5 Sub clause 4.5.5 4.5.5.2(Bursting pressure)	-	1000	-
Clause 4.5 Sub clause 4.5.6(Grip Strength Test)	-	1000	-
Clause 4.5 Sub clause 4.5.7(Burning Behaviour)	-	250	-
Clause 5.2 (a)(Marking Manufacturer’s name or trade-mark, if any )	-	250	-
Clause 5.2 (b)(Marking Words LPG, Max W.P. 1.0 MPa; )	-	250	-
Clause 5.2 (c)(Marking Nominal bore, 1000111)	-	250	-
Clause 5.2 (d)(Marking Batch/Lot No. )	-	250	-
Clause 5.2 (e)(Marking Month and year of manufacture )	-	250	-
Clause 5.2 (f)(Marking IS 9573 (Part 2) )	-	250	-
Clause 5.2 (f)(Marking ecommended to replace before (MONTH/YEAR) )	-	250	-
Clause 5.2.1(BIS Certification Marking )	-	250	-
Clause 4.4 Sub Clause 4.4.3 (a)(Resistance of Lining to n-pentane)	-	500	-
Clause 4.4 Sub Clause 4.4.3 (b)(Resistance of Lining to n-pentane)	-	500	-

02 Dec, 2027

-
-

8034

Hari Shankar Singhania Elastomer and Tyre Research Institute, HASETRI, Mysuru

6183136

IS 9573 : Part 1 (2017)

Rubber hose for liquefied petroleum gas (Lpg) - Specification: Part 1 industrial application (Fourth Revision)

Hose

18500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4.1 (General)	-	250	-
Clause 4.1 (General)	-	250	-
Clause 4.2(Material)	-	250	-
Clause 4.1(General)	-	250	-
Clause 4.2.1(Lining)	-	250	-
Clause 4.2.2(Reinforcement)	-	250	-
Clause 4.2.3(Cover)	-	250	-
Clause 4.3 Sub Clause 4.3.1 Table 1(Bore Size)	-	250	-
Clause 4.3 Sub Clause 4.3.2 (a)(Thickness of Lining and Cover)	-	250	-
Clause 4.3 Sub Clause 4.3.3(Length)	-	250	-
Clause 4.4 Sub Clause 4.4.1 Table 2 (i) (a)(Tensile Strength- Lining)	-	500	-
Clause 4.4 Sub Clause 4.4.1 Table 2 (i) (b)(Tensile Strength- cover)	-	500	-
Clause 4.4 Sub Clause 4.4.1 Table 2 (ii) (a)(Elongation at break- Lining)	-	500	-
Clause 4.4 Sub Clause 4.4.1 Table 2 (ii) (b)(Elongation at break- cover)	-	500	-
Clause 4.4 Sub Clause 4.4.2 (a)(Accelerated Ageing Test lining)	-	1000	-
Clause 4.4 Sub Clause 4.4.2 (b)(Accelerated Ageing Test lining)	-	1000	-
Clause 4.4 Sub Clause 4.4.2 (a)(Accelerated Ageing Test cover)	-	1000	-
Clause 4.4 Sub Clause 4.4.2 (b)(Accelerated Ageing Test cover)	-	1000	-
Clause 4.5 Sub clause 4.5.1(Adhesion)	-	1000	-
Clause 4.5 Sub clause 4.5.2(Low Temperature Flexibility)	-	1000	-
Clause 4.5 Sub clause 4.5.3(Flexibility of Hose)	-	500	-
Clause 4.5 Sub clause 4.5.4(Ozone Resistance)	-	2000	-
Clause 4.5 Sub clause 4.5.5 4.5.5.1(Proof pressure test)	-	1000	-
Clause 4.5 Sub clause 4.5.5 4.5.5.2(Bursting pressure)	-	1000	-
Clause 4.5 Sub clause 4.5.6(Electrical Continuity Test)	-	250	-
Clause 4.5 Sub clause 4.5.7(Burning Behaviour)	-	250	-
Clause 5.2 (a)(Marking Manufacturer’s name or trade-mark, if any )	-	250	-
Clause 5.2 (b)(Marking Words LPG, Max W.P. 2.5 MPa; )	-	250	-
Clause 5.2 (c)(Marking Nominal bore )	-	250	-
Clause 5.2 (d)(Marking Batch/Lot No. )	-	250	-
Clause 5.2 (e)(Marking Month and year of manufacture )	-	250	-
Clause 5.2.1(BIS Certification Marking )	-	250	-
Clause 5.2 (f)(Marking IS 9573 (Part 1) )	-	250	-
Clause 4.3 Sub Clause 4.3.2 (b)(Thickness of Lining and Cover)	-	250	-
Clause 4.4 Sub Clause 4.4.3 (a)(Resistance of Lining to n-pentane)	-	500	-
Clause 4.4 Sub Clause 4.4.3 (b)(Resistance of Lining to n-pentane)	-	500	-

02 Dec, 2027

-
Scope restriction: From 6 mm to 25 mm

8035

Hari Shankar Singhania Elastomer and Tyre Research Institute, HASETRI, Mysuru

6183136

IS 15636 (2022)

Automotive vehicles - Pneumatic tyres for commercial vehicles - Diagonal and radial ply

Commercial Vehicles — Diagonal and Radial Ply

99375 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.2.2(Technical specification-Declaration)	-	0	-
5(Marking)	-	6250	Dimension charges include section width, outer diameter, treadwear indicators & markings
4.1(Tyre dimension- Section Width)	-	6250	Dimension charges include section width, outer diameter, treadwear indicators & markings
4.1(Tyre dimension- Outer diameter)	-	6250	Dimension charges include section width, outer diameter, treadwear indicators & markings
4.1.1(Tread wear Indicator)	-	6250	Dimension charges include section width, outer diameter, treadwear indicators & markings
4.5(Tyre strength (Plunger test))	-	15000	-
4.2(Endurance test-Change in diameter)	-	75000	-
4.3(Load & Speed test)	-	18500	-
Cl. No. 4.1.1.1, Annex A, Table No. 6 to 28(Tyre Dimension_Section Width of Tyre)	-	6250	Dimension charges include section width, outer diameter, treadwear indicators & markings
Cl. No. 4.1.1.2, Annex A, Table No. 6 to 28(Tyre Dimension_Outer Diameter of Tyre)	-	6250	Dimension charges include section width, outer diameter, treadwear indicators & markings
Cl. No. 4.2, Annex B, Table No. 29(Endurance Test)	-	75000	-
Cl. No. 4.2.5, Annex B, Table No. 29(Second Endurance Test)	-	75000	-
Cl. No. 4.3, Annex C, Table No. 18(Load/ Speed Performance Test)	-	18500	-
Cl. No. 4.4, Annex-A(Tread Wear Indicators)	-	6250	Dimension charges include section width, outer diameter, treadwear indicators & markings
Cl. No. 4.5, Annex D, Table No.30 to 33(Tyre Strength Test (Plunger Test)Test)	-	15000	-
Cl. No. 5.1(a) to (m)(Markings)	-	6250	Dimension charges include section width, outer diameter, treadwear indicators & markings
Cl. No. 5.2, Annex E,(Arrangement of Tyre Markings)	-	6250	Dimension charges include section width, outer diameter, treadwear indicators & markings
Cl. No. 4.1.1.1, Annex A, Table No. 6 to 28(Tyre Dimension_Section Width of Tyre)	-	6250	Dimension charges include section width, outer diameter, treadwear indicators & markings
Cl. No. 4.1.1.2, Annex A, Table No. 6 to 28(Tyre Dimension_Outer Diameter of Tyre)	-	6250	Dimension charges include section width, outer diameter, treadwear indicators & markings
Cl. No. 4.2, Annex B, Table No. 29(Endurance Test)	-	75000	-
Cl. No. 4.2.5, Annex B, Table No. 29(Second Endurance Test)	-	75000	-
Cl. No. 4.3, Annex C, Table No. 18(Load/ Speed Performance Test)	-	18500	-
Cl. No. 4.4, Annex-A(Tread Wear Indicators)	-	6250	Dimension charges include section width, outer diameter, treadwear indicators & markings
Cl. No. 4.5, Annex D, Table No.30 to 33(Tyre Strength Test (Plunger Test)Test)	-	15000	-
Cl. No. 5.1(a) to (m)(Markings)	-	6250	Dimension charges include section width, outer diameter, treadwear indicators & markings
Cl. No. 5.2, Annex E,(Arrangement of Tyre Markings)	-	6250	Dimension charges include section width, outer diameter, treadwear indicators & markings

02 Dec, 2027

-
-

8036

Hari Shankar Singhania Elastomer and Tyre Research Institute, HASETRI, Mysuru

6183136

IS 15633 (2022)

Automotive vehicles - pneumatic tyres for passenger car vehicles - diagonal and radial ply

Passenger Car Vehicle — Diagonal and Radial Ply

96875 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.2.2,Anx-J(Technical specification-Declaration)	-	0	-
5(Marking)	-	5000	Dimension charges includes section width, outer diameter, tread wear indicators & markings
4.1(Tyre dimension- Section Width)	-	5000	Dimension charges includes section width, outer diameter, tread wear indicators & markings
4.1(Tyre dimension- Outer diameter)	-	5000	Dimension charges includes section width, outer diameter, tread wear indicators & markings
4.5(Tread wear Indicator)	-	5000	Dimension charges includes section width, outer diameter, tread wear indicators & markings
4.6(Tyre strength (Plunger test))	-	10000	-
4.3(Endurance test)	-	65000	-
4.2(Load & Speed test)	-	15625	-
4.4(Bead Unseating Resistance)	-	10000	-
Cl. No. 4.1.1.1, Annex A, B Table No. 9 to 15 & 16(Tyre Dimension_Section Width of Tyre)	-	5000	Dimension charges includes section width, outer diameter, tread wear indicators & markings
Cl. No. 4.1.1.2, Annex A, B Table No. 9 to 15 & 16(Tyre Dimension_Outer Diameter of Tyre)	-	5000	Dimension charges includes section width, outer diameter, tread wear indicators & markings
Cl. No. 4.2, Annex C, Table No. 17(Load/Speed Performance Test)	-	15625	-
Cl. No. 4.3, Annex D, Table No. 18(Endurance Test)	-	65000	-
Cl. No. 4.4, Annex E, Table No.19 to 21(Bead Unseating Resistance Test)	-	10000	-
Cl. No. 4.5, Annex-B(Tread Wear Indicators)	-	5000	Dimension charges includes section width, outer diameter, tread wear indicators & markings
Cl. No. 4.6, Annex-F, Table No. 22 to 24(Tyre Strength Test (Plunger Test))	-	10000	-
Cl. No. 5.1 (a) to 5.1 (n)(Markings)	-	5000	Dimension charges includes section width, outer diameter, tread wear indicators & markings
Cl. No. 5.4, Annex H,(Arrangement of Tyre Markings)	-	5000	Dimension charges includes section width, outer diameter, tread wear indicators & markings
Cl. No. 4.1.1.1, Annex A, B Table No. 9 to 15 & 16(Tyre Dimension_Section Width of Tyre)	-	5000	Dimension charges includes section width, outer diameter, tread wear indicators & markings
Cl. No. 4.1.1.2, Annex A, B Table No. 9 to 15 & 16(Tyre Dimension_Outer Diameter of Tyre)	-	5000	Dimension charges includes section width, outer diameter, tread wear indicators & markings
Cl. No. 4.2, Annex C, Table No. 17(Load/Speed Performance Test)	-	15625	-
Cl. No. 4.3, Annex D, Table No. 18(Endurance Test)	-	65000	-
Cl. No. 4.4, Annex E, Table No.19 to 21(Bead Unseating Resistance Test)	-	10000	-
Cl. No. 4.5, Annex-B(Tread Wear Indicators)	-	5000	Dimension charges includes section width, outer diameter, tread wear indicators & markings
Cl. No. 4.6, Annex-F, Table No. 22 to 24(Tyre Strength Test (Plunger Test))	-	10000	-
Cl. No. 5.1 (a) to 5.1 (n)(Markings)	-	5000	Dimension charges includes section width, outer diameter, tread wear indicators & markings
Cl. No. 5.4, Annex H,(Arrangement of Tyre Markings)	-	5000	Dimension charges includes section width, outer diameter, tread wear indicators & markings
4.2.7 (Amendment -1)(Load/Speed Performance Test for Run Flat Tyres)	-	15625	-
4.2.8 (Amendment -1)(Load/Speed Performance Test for Extended Mobility Tyres (EMT))	-	15625	-

02 Dec, 2027

-
-

8037

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 6664 (1992)

Rubber microcellular sheets for soles and heels - Specification (First Revision)

4600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2(Flexing resistance )	-	600	For flexing resistance test
4.2(Water absorption)	-	800	For Water absorption test
4.2(Heat Shrinkage )	-	400	For Heat shrinkage test
4.2(Shrinkage at room temp)	-	0	-
4.2(Split tear strength)	-	600	For Spit tear strength
4.2(Compression set)	-	800	For compression set test
4.2(Hardness (Shore A))	-	700	For Hardness test
4.2(Density )	-	400	For density test
4.2(Size & Thickness )	-	300	For dimension test
4, Cl.4.1,4.1.1,4.1.2(Requirements)	-	300	For dimension test
Cl.4 Cl.4.1.3 And 8.3,Table1, i)(Relative density)	-	400	For density test
Cl.4.1.3 And 8.3,Table1, iii)(Hardness, Shore A durometer min)	-	700	For Hardness test
Cl.4 Cl.4.1.3 And 8.3,Table1, iii)(Change in Hardness after ageing at 100±1°C for 24hr)	-	700	For Hardness test
Cl.4 Cl.4.1.3 And 8.3,Table1, iv)(Compression set at constant stress percent, Max)	-	800	For compression set test
Cl.4 Cl.4.1.3 And 8.3,Table1, v)(Split tear strength, kg,Min)	-	600	For Spit tear strength
Cl.4 Cl.4.1.3 And 8.3,Table1, vi)(Room Temperature shrinkage at 27±2°C for 2weeks, percent, Max)	-	400	For Heat shrinkage test
Cl.4 Cl.4.1.3 And 8.3,Table 1, vi)(Heat shrinkage test at 100±1°C for 1 hour max)	-	400	For Heat shrinkage test
Cl.4 Cl.4.1.3 And 8.3,Table1, viii)(Water absorption , percent by mass, Max)	-	800	For Water absorption test
Cl.4 Cl.4.1.3 And 8.3,Table 1, viii)(Flexing resistance: Maximum cut growth at 50 000 cycles)	-	600	For flexing resistance test
5, 5.1(Marking)	-	300	For dimension test
6, 6.1(Packing)	-	300	For dimension test
"Cl.4 ,Cl.4.1,4.1.1,4.1.2(Requirements ")	-	300	For dimension test
Cl.4.1.3 And 8.3,Table1(i) Relative density)	-	400	For density test
Cl.4.1.3 And 8.3,Table1(ii) Hardness, Shore A durometer min)	-	700	For Hardness test
Cl.4.1.3 And 8.3,Table1(iii) Change in Hardness after ageing at 100±1°C for 24hr)	-	700	For Hardness test
Cl.4.1.3 And 8.3,Table1(iv) Compression set at constant stress percent, Max)	-	800	For compression set test
Cl.4.1.3 And 8.3,Table1(vi) Room Temperature shrinkage at 27±2°C for 2weeks, percent, Max)	-	400	For Heat shrinkage test
Cl.4.1.3 And 8.3,Table 1 vi(Heat shrinkage test at 100±1°C for 1 hour max)	-	400	For Heat shrinkage test
Cl.4.1.3 And 8.3,Table1(viii)Water absorption , percent by mass, Max)	-	800	For Water absorption test
Cl.4.1.3 And 8.3,Table1(ix)Flexing resistance)	-	600	For flexing resistance test
5, 5.1(Marking)	-	300	For dimension test
6, 6.1(Packing)	-	300	For dimension test
4.2(Flexing resistance )	-	-	-
4.2(Water absorption)	-	-	-
4.2(Heat Shrinkage )	-	-	-
4.2(Shrinkage at room temp)	-	-	-
4.2(Split tear strength)	-	-	-
4.2(Compression set)	-	-	-
4.2(Hardness (Shore A))	-	-	-
4.2(Density )	-	-	-
4.2(Size & Thickness )	-	-	-
4, Cl.4.1,4.1.1,4.1.2(Requirements)	-	-	-
Cl.4 Cl.4.1.3 And 8.3,Table1, i)(Relative density)	-	-	-
Cl.4.1.3 And 8.3,Table1, iii)(Hardness, Shore A durometer min)	-	-	-
Cl.4 Cl.4.1.3 And 8.3,Table1, iii)(Change in Hardness after ageing at 100±1°C for 24hr)	-	-	-
Cl.4 Cl.4.1.3 And 8.3,Table1, iv)(Compression set at constant stress percent, Max)	-	-	-
Cl.4 Cl.4.1.3 And 8.3,Table1, v)(Split tear strength, kg,Min)	-	-	-
Cl.4 Cl.4.1.3 And 8.3,Table1, vi)(Room Temperature shrinkage at 27±2°C for 2weeks, percent, Max)	-	-	-
Cl.4 Cl.4.1.3 And 8.3,Table 1, vi)(Heat shrinkage test at 100±1°C for 1 hour max)	-	-	-
Cl.4 Cl.4.1.3 And 8.3,Table1, viii)(Water absorption , percent by mass, Max)	-	-	-
Cl.4 Cl.4.1.3 And 8.3,Table 1, viii)(Flexing resistance: Maximum cut growth at 50 000 cycles)	-	-	-
5, 5.1(Marking)	-	-	-
6, 6.1(Packing)	-	-	-
"Cl.4 ,Cl.4.1,4.1.1,4.1.2(Requirements ")	-	-	-
Cl.4.1.3 And 8.3,Table1(i) Relative density)	-	-	-
Cl.4.1.3 And 8.3,Table1(ii) Hardness, Shore A durometer min)	-	-	-
Cl.4.1.3 And 8.3,Table1(iii) Change in Hardness after ageing at 100±1°C for 24hr)	-	-	-
Cl.4.1.3 And 8.3,Table1(iv) Compression set at constant stress percent, Max)	-	-	-
Cl.4.1.3 And 8.3,Table1(vi) Room Temperature shrinkage at 27±2°C for 2weeks, percent, Max)	-	-	-
Cl.4.1.3 And 8.3,Table 1 vi(Heat shrinkage test at 100±1°C for 1 hour max)	-	-	-
Cl.4.1.3 And 8.3,Table1(viii)Water absorption , percent by mass, Max)	-	-	-
Cl.4.1.3 And 8.3,Table1(ix)Flexing resistance)	-	-	-
5, 5.1(Marking)	-	-	-
6, 6.1(Packing)	-	-	-
Cl.4.1.3 and 8.3,Table 1 ii(Thickness)	-	-	-
Cl.4.1.3 and 8.3,Table 1 vii(Abrasion resistance at applied force of 5 N)	-	-	-

04 Dec, 2028

-
Included w.e.f. 24.01.2025

8038

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 6719 (1972)

Solid Pvc Soles And Heels

3500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.6.1(Hardness )	-	800	5% discount to BIS
3.6 (vi)(Lead (as Pb) ppm)	-	250	5% discount to BIS
3.6 (v)(Volatility, percent by means )	-	250	5% discount to BIS
3.6 (iv)(Tear Strength a) Force Part b) Back Part )	-	600	5% discount to BIS
3.6 (iii)(Elongation at break, percent )	-	600	5% discount to BIS
3.6 (ii)(Tensile Strength )	-	600	5% discount to BIS
3.6 (i)(Relative density )	-	400	5% discount to BIS
Cl. 3.1,3.2,3.3,3.4,3.5(Material)	-	0	-
6 ,6.1,6.2,6.3(Test Method)	-	0	-
Cl. 3.1,3.2,3.3,3.4,3.5(Material)	-	0	-
Cl. 6.4(Measurement of thickness)	-	0	-
3.6.1(Hardness )	-	-	-
3.6 (vi)(Lead (as Pb) ppm)	-	-	-
3.6 (v)(Volatility, percent by means )	-	-	-
3.6 (iv)(Tear Strength a) Force Part b) Back Part )	-	-	-
3.6 (iii)(Elongation at break, percent )	-	-	-
3.6 (ii)(Tensile Strength )	-	-	-
3.6 (i)(Relative density )	-	-	-
Cl. 3.1,3.2,3.3,3.4,3.5(Material)	-	-	-
6 ,6.1,6.2,6.3(Test Method)	-	-	-
Cl. 3.1,3.2,3.3,3.4,3.5(Material)	-	-	-
Cl. 6.4(Measurement of thickness)	-	-	-
Table 1 (Flexing resistance)(Table 1 (Flexing resistance, Bennewart method, cut growth at the end of 30 000 cycles, mm, Max))	-	-	-
Table 1 (Abrasion resistance)(Abrasion resistance at applied force of 10 N (volume loss), mm3, Max)	-	-	-
Table 1 Cl. 3.6, Sl No (iii)(Volatility, Percent by mass)	-	-	-
Table 1 Cl. 3.6, Sl No (iv)("Lead (as Pb), Shoes for infants, children and boys and girls, ppm")	-	-	-
Table 1 Cl. 3.6, Sl No (iv)("Lead (as Pb), for other sized shoes, ppm ")	-	-	-

04 Dec, 2028

-
Included w.e.f. 24.01.2025

8039

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 5676 (1995)

Moulded solid rubber soles and heels - SpecificatlOn (Second Revision)

4500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5/5.3/5.3.1(REQUIREMENTS- Construction)	-	200	20 % discount to BIS
5/5.1(REQUIREMENTS-General)	-	200	20 % discount to BIS
5/5.2- Fig. 1 to 5(REQUIREMENTS-Design)	-	200	20 % discount to BIS
5/5.5- Table1(REQUIREMENTS-Thickness)	-	200	20 % discount to BIS
5/5.6/5.6.1(REQUIREMENTS-Channel)	-	500	20 % discount to BIS
5/5.7- Table2(REQUIREMENTS- Physical Requirements- as per IS 3400 (Part 1, Part 2, Part 4, Part 9, Part 10, Part 16))	-	2100	20 % discount to BIS
5/5.3/5.3.1(REQUIREMENTS- Construction)	-	200	20 % discount to BIS
5/5.1(REQUIREMENTS-General)	-	200	20 % discount to BIS
5/5.2- Fig. 1 to 5(REQUIREMENTS-Design)	-	200	20 % discount to BIS
5/5.5- Table1(REQUIREMENTS-Thickness)	-	200	20 % discount to BIS
5/5.6/5.6.1(REQUIREMENTS-Channel)	-	500	20 % discount to BIS
5/5.7- Table2(REQUIREMENTS- Physical Requirements- as per IS 3400 (Part 1, Part 2, Part 4, Part 9, Part 10, Part 16))	-	2100	20 % discount to BIS
5/5.3/5.3.1(REQUIREMENTS- Construction)	-	200	20 % discount to BIS
5/5.1(REQUIREMENTS-General)	-	200	20 % discount to BIS
5/5.2- Fig. 1 to 5(REQUIREMENTS-Design)	-	200	20 % discount to BIS
5/5.5- Table1(REQUIREMENTS-Thickness)	-	200	20 % discount to BIS
5/5.6/5.6.1(REQUIREMENTS-Channel)	-	500	20 % discount to BIS
5/5.7- Table2(REQUIREMENTS- Physical Requirements- as per IS 3400 (Part 1, Part 2, Part 4, Part 9, Part 10, Part 16))	-	2100	20 % discount to BIS
6(Marking and packing)	-	200	20 % discount to BIS
8.1(Test methods)	-	100	20 % discount to BIS
8.3(Measurement of thickness)	-	200	20 % discount to BIS
Cl.6.1,6.2,6.3(Marking and packing)	-	200	20 % discount to BIS
8.1(Test Methods)	-	100	20 % discount to BIS
Cl.8.3(Measurement of thickness ")	-	200	20 % discount to BIS
5.5 (Amendment 1)(Thickness)	-	200	20 % discount to BIS
5.7 Table 2 i) (Amendment 1)(Relative Density)	-	200	20 % discount to BIS
5.7, Table 2 ii) (Amendment 1)(Hardness, degree, Shore A)	-	500	20 % discount to BIS
5.7, Table 2 iv) (Amendment 1)(Abrasion Resistance at applied force of 10 N)	-	400	20 % discount to BIS
5.7, Table 2 v) (Amendment 1)(Tensile strength)	-	700	20 % discount to BIS
5.7, Table 2 vi) (Amendment 1)(Elongation at break)	-	700	20 % discount to BIS
5.7, Table 2 vii) (Amendment 1)(Tear strength (average force))	-	700	20 % discount to BIS
5.7, Table 2 iii) (Amendment 1)(Flexing resistance)	-	400	20 % discount to BIS
5/5.3/5.3.1(REQUIREMENTS- Construction)	-	-	-
5/5.1(REQUIREMENTS-General)	-	-	-
5/5.2- Fig. 1 to 5(REQUIREMENTS-Design)	-	-	-
5/5.5- Table1(REQUIREMENTS-Thickness)	-	-	-
5/5.6/5.6.1(REQUIREMENTS-Channel)	-	-	-
5/5.7- Table2(REQUIREMENTS- Physical Requirements- as per IS 3400 (Part 1, Part 2, Part 4, Part 9, Part 10, Part 16))	-	-	-
5/5.3/5.3.1(REQUIREMENTS- Construction)	-	-	-
5/5.1(REQUIREMENTS-General)	-	-	-
5/5.2- Fig. 1 to 5(REQUIREMENTS-Design)	-	-	-
5/5.5- Table1(REQUIREMENTS-Thickness)	-	-	-
5/5.6/5.6.1(REQUIREMENTS-Channel)	-	-	-
5/5.7- Table2(REQUIREMENTS- Physical Requirements- as per IS 3400 (Part 1, Part 2, Part 4, Part 9, Part 10, Part 16))	-	-	-
5/5.3/5.3.1(REQUIREMENTS- Construction)	-	-	-
5/5.1(REQUIREMENTS-General)	-	-	-
5/5.2- Fig. 1 to 5(REQUIREMENTS-Design)	-	-	-
5/5.5- Table1(REQUIREMENTS-Thickness)	-	-	-
5/5.6/5.6.1(REQUIREMENTS-Channel)	-	-	-
5/5.7- Table2(REQUIREMENTS- Physical Requirements- as per IS 3400 (Part 1, Part 2, Part 4, Part 9, Part 10, Part 16))	-	-	-
6(Marking and packing)	-	-	-
8.1(Test methods)	-	-	-
8.3(Measurement of thickness)	-	-	-
Cl.6.1,6.2,6.3(Marking and packing)	-	-	-
8.1(Test Methods)	-	-	-
Cl.8.3(Measurement of thickness ")	-	-	-
5.5 (Amendment 1)(Thickness)	-	-	-
5.7 Table 2 i) (Amendment 1)(Relative Density)	-	-	-
5.7, Table 2 ii) (Amendment 1)(Hardness, degree, Shore A)	-	-	-
5.7, Table 2 iv) (Amendment 1)(Abrasion Resistance at applied force of 10 N)	-	-	-
5.7, Table 2 v) (Amendment 1)(Tensile strength)	-	-	-
5.7, Table 2 vi) (Amendment 1)(Elongation at break)	-	-	-
5.7, Table 2 vii) (Amendment 1)(Tear strength (average force))	-	-	-
5.7, Table 2 iii) (Amendment 1)(Flexing resistance)	-	-	-

04 Dec, 2028

-
Included w.e.f. 24.01.2025

8040

Hari Shankar Singhania Elastomer and Tyre Research Institute, HASETRI, Mysuru

6183136

IS 13098 (2012)

Automotive vehicles - Tubes for pneumatic tyres - Specification (First Revision)

Tube

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3/3.1 (for valve refer IS 9081)(MATERIALS, FORM AND FIT)	-	250	-
3/3.3(Uniformity(The Thickness shall not vary from the arithmetic mean of the readings by ± 17.5 % at any point in longitudinal direction :-Crown centre,Base centre,Side wall - 1,Side wall - 2))	-	250	-
4/4.1.1(Elongation at break (Class A' Tubes))	-	500	-
4/4.1.1(Elongation at break (Class B' Tubes))	-	500	-
4/4.1.2( Strength of Splice (Class A' Tubes))	-	500	-
4/4.1.2( Strength of Splice (Class B' Tubes))	-	500	-
4/4.1.3 Refer annex B(Set After Ageing(Class A' Tubes))	-	500	-
4/4.1.3 Refer annex B(Set After Ageing(Class B' Tubes))	-	500	-
4/4.1.4 Refer annex C(Accelerated Ageing(Both Class A and Class B))	-	1000	-
5(AIR TIGHTNESS)	-	500	-
6(MARKING)	-	250	-
6.1(Tubes Shall be permanently and legibly marked on the outside with the following;)	-	250	-
6.1(a)(Manufacturer's name or trade-name)	-	250	-
6.1(b)(Tyre size designation or designations for which the tube is applicable . The size designation description shall contain, (1) nominal tyre section width code; (2) nominal rim diameter code; (3) nominal aspect ratio, if applicable; (4) 'R' to identify Radial tyre application; and (5) character '-' or the letter 'D' to identify bias tyre application.)	-	250	-
6.1 (c)(Identification of month and year of manufacturing as per scheme given in Annex D.)	-	250	-
6.1 (d)(Word 'BUTYL' and or blue line of 4.0mm min width to identify tube of Class A.)	-	250	-
3.2(Tube Material)	-	250	-
4.1.1(% Elongation at break (Before Ageing))	-	500	-
4.1.2(Strength of Splice)	-	500	-
4.1.3(Set After Ageing (Tension Set))	-	500	-
4.1.4(Accelerated Ageing at 100±2°C for 48 hours. (% drop in Elongation at break))	-	1000	-
5(Air Tightness)	-	250	-
6("Marking 1. Manufacturer's name or Trade name (C1. No.6.1. a) 2. Size Designation (Cl. No. 6.1.b) 3. Identification of month and year of manufacturing (C1. No.6.1.c) 4. ‘Butyl’ Mark and or Blue line of 4.0mm width (Cl. No. 6.1.d) 5. BIS Certification Marking (C1. No.6.2)")	-	250	-
3.3.1(Thickness Uniformity)	-	250	-

02 Dec, 2027

-
Exclusion: Cl 3 & Cl 3.1 (Material)

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number