BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15618 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

7981

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY - CIPET, HALDIA

5116334

IS 7834 : Part 1 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 1 General requirements

All size

4219 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4(Minimum Thickness)	-	250	Discount of 25% is applicable on Total Test Charges only for BIS
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Minimum Socket Length)	-	250	Discount of 25% is applicable on Total Test Charges only for BIS
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Mean Socket Internal Diameter at Mid-Point of Socket Length)	-	0	NA
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Out-of-roundness tolerances of socket inside diameter)	-	0	NA
Cl. 6.1(Stress Relief Test- Appendix A)	-	700	Discount of 25% is applicable on Total Test Charges only for BIS
Cl. 6.2(Opacity- Appendix B)	-	575	Discount of 25% is applicable on Total Test Charges only for BIS
Cl. 6.3(Effect on Water[(Lead ( first extraction )]- Appendix C)	-	3000	Discount of 25% is applicable on Total Test Charges only for BIS
Cl. 6.3(Effect on Water[(Lead ( third extraction )]- Appendix C)	-	0	NA
Cl. 6.3(Effect on Water [Dialkyl tin C4, and higher homologues, measured as tin ( third extraction )]- Appendix C)	-	0	NA
Cl. 6.3(Effect on Water [Other toxic substances ( third extraction )]- Appendix C)	-	0	NA
Cl. 6.4(Short-Term Hydraulic Test- Appendix D)	-	850	Discount of 25% is applicable on Total Test Charges only for BIS

14 Dec, 2027

-
-

7982

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY - CIPET, HALDIA

5116334

IS 12786 (1989)

Irrigation equipment - Polyethylene pipes for irrigation laterals - Specification

All

6325 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.0 5.1 (Table1) (Dimensions a)Outside diameter of pipe)	-	250	Discount of 25% is applicable on Total Test Charges only for BIS
5.0 5.1 (Table1) (b)Tolerance on OD)	-	0	NA
5.0 5.1 (Table1) (c)Wall thickness of pipe Minimum)	-	250	Discount of 25% is applicable on Total Test Charges only for BIS
5.0 5.1 (Table1) (c)Wall thickness of pipe Maximum)	-	0	NA
6.0 (6.1) (Visual appearance)	-	300	Discount of 25% is applicable on Total Test Charges only for BIS
7.1 Table-2 (b)Acceptance Test for 01 hour at 20°C & 6.9MPa induced stress)	-	1000	Discount of 25% is applicable on Total Test Charges only for BIS
7.1 Table-2 (Hydraulic Characteristics a)Quality Test for 100 hours at 70°C & 2.5.MPa induced stress. )	-	3000	Discount of 25% is applicable on Total Test Charges only for BIS
7.2(Reversion Test)	-	1000	Discount of 25% is applicable on Total Test Charges only for BIS
7.3(Tensile Test)	-	1350	Tensile strength(1100.00)+ Specimen preparation(250.00) Discount of 25% is applicable on Total Test Charges only for BIS
7.3(Elongation at Break)	-	0	NA
7.4(SusceptibiIity to Environmental Stress Cracking)	-	1200	Discount of 25% is applicable on Total Test Charges only for BIS

14 Dec, 2027

-
-

7983

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY - CIPET, HALDIA

5116334

IS 14182 (1994)

Solvent cement for use with unplasticized polyvinyl chloride plastic pipe and fittings - Specifications

All

8038 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2(Shall be thixotropic and consist substantially of solvents that will swell plastisized PVC polymers and stabilizers)	-	300	Discount of 25% is applicable on Total Test Charges only for BIS
4.3(Shall be capable of application by brush and shall contain no lumps or foreign matter or macroscopic undissolved particles that will adversely affect the ultimate joint strength or chemical resistance of the material )	-	0	NA
4.4(Shall not show gelation and no evidence of stratification or separation that cannot be removed by stirring)	-	0	NA
4.5(When used under the conditions for which they are designed, non metallic materials in contact with or likely to come in contact with potable water shall not constitute a toxic hazard , shall not support microbial growth and shall not give rise to unpleasant taste or odour, cloudiness or discolouration of the water)	-	3000	Discount of 25% is applicable on Total Test Charges only for BIS
4.7(Vinyl Chloride Polymer content - Annex A)	-	1100	Discount of 25% is applicable on Total Test Charges only for BIS
4.8(Dissolution - Capable of dissolving an additional unplastisized PVC granular, powder compound or resin)	-	400	Discount of 25% is applicable on Total Test Charges only for BIS
4.9 and 6.1(Viscosity - Regular)	-	1100	Discount of 25% is applicable on Total Test Charges only for BIS
4.9 and 6.1(Viscosity - Medium)	-	0	NA
4.9 and 6.1(Viscosity - Heavy )	-	0	NA
4.10 and 6.1(Lap Shear Strength - After 2 h curing time)	-	1600	Test Charges =1100 & 500 specimen charges Discount of 25% is applicable on Total Test Charges only for BIS
4.10 and 6.1(Lap Shear Strength - After 10 h curing time)	-	1100	Discount of 25% is applicable on Total Test Charges only for BIS
4.10 and 6.1(Lap Shear Strength - After 72 h curing time)	-	1100	Discount of 25% is applicable on Total Test Charges only for BIS
4.11 and 6.1(Hydrostatic Burst Strength - After 2 h curing time)	-	850	Discount of 25% is applicable on Total Test Charges only for BIS

14 Dec, 2027

-
-

7984

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY - CIPET, HALDIA

5116334

IS 12701 (1996)

Rotational moulded polyethylene water storage tanks - specification (First Revision)

Capacity 7500 liter for Cylindrical vertical tank

13788 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.3(Carbon Black Content )	-	925	Discount of 25% is applicable on Total Test Charges only for BIS
4.2.3(Carbon Dispersion Test)	-	700	Discount of 25% is applicable on Total Test Charges only for BIS
5(Types and Features )	-	0	NA
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	1500	a)Minimum net capacity & gross capacity = 500 b) Over all diameter range = 250 c) Over all height range = 250 d) Minimum internal dia of Man-hole/Hand-hole = 250 e) Minimum wall & bottom thickness= 250
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	1500	Discount of 25% is applicable on Total Test Charges only for BIS
5.1 Table 1 (7)(Minimum Weight of Tank (Without Lid))	-	500	Discount of 25% is applicable on Total Test Charges only for BIS
5.4(Wall Thickness above effective height)	-	500	Discount of 25% is applicable on Total Test Charges only for BIS
5.6(Types and Features )	-	250	Discount of 25% is applicable on Total Test Charges only for BIS
6.1(Finish)	-	300	Discount of 25% is applicable on Total Test Charges only for BIS
7.1.1(Resistance to Deformation)	-	700	Discount of 25% is applicable on Total Test Charges only for BIS
7.1.2(Resistance to Deformation)	-	700	Discount of 25% is applicable on Total Test Charges only for BIS
7.2(Resistance to Impact)	-	1100	Discount of 25% is applicable on Total Test Charges only for BIS
7.3(Test for Top Load Resistance)	-	900	Discount of 25% is applicable on Total Test Charges only for BIS
7.4(Tensile Strength)	-	1350	Testing charge+ Specimen charge ( 1100+250) Discount of 25% is applicable on Total Test Charges only for BIS
7.5(Flexural Modulus)	-	1350	Testing charge+ Specimen charge ( 1100+250) Discount of 25% is applicable on Total Test Charges only for BIS
7.6(overall Migration)	-	2200	Testing charge+ Specimen charge ( 1700+500) Discount of 25% is applicable on Total Test Charges only for BIS
9.1(Lid Thickness)	-	1300	i) Lid Thickness= 250 ii) Material Identification= 1050 Discount of 25% is applicable on Total Test Charges only for BIS
9.1(Man-Hole and Hand-Hole Lids)	-	1625	i) Carbon Black Content =925 ii) Carbon Black Dispersion = 700 Discount of 25% is applicable on Total Test Charges only for BIS
9.2(Man-Hole and Hand-Hole Lids)	-	200	Discount of 25% is applicable on Total Test Charges only for BIS
9.2.1(Man-Hole and Hand-Hole Lids)	-	200	Discount of 25% is applicable on Total Test Charges only for BIS

14 Dec, 2027

-
-

7985

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY - CIPET, HALDIA

5116334

IS 14333 (1996)

High Density Polyethylene Pipe For Sewerage -

Size upto 355 mm DN

8681 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Colour)	-	300	Discount of 25% is applicable on Total Test Charges only for BIS
6(Dimensions of pipes)	-	250	Discount of 25% is applicable on Total Test Charges only for BIS
7(Visual Appearance)	-	300	Discount of 25% is applicable on Total Test Charges only for BIS
8.1(Hydraulic characteristics)	-	6400	Acceptance test + Type test (1600+4800) Discount of 25% is applicable on Total Test Charges only for BIS
8.2(Reversion)	-	1000	Testing charges+ Specimen charges (700+300) Discount of 25% is applicable on Total Test Charges only for BIS
8.3(Density)	-	500	Discount of 25% is applicable on Total Test Charges only for BIS
8.4(Melt Flow Rate)	-	1100	Discount of 25% is applicable on Total Test Charges only for BIS
Cl. 8.5, IS 2530-1963, Cl. 10(Cabon Black Content)	-	925	Discount of 25% is applicable on Total Test Charges only for BIS
Cl. 8.5, IS 2530-1963, Cl. 16(Carbon Black Dispersion)	-	700	Discount of 25% is applicable on Total Test Charges only for BIS

14 Dec, 2027

-
-

7986

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY - CIPET, HALDIA

5116334

IS 14151 : Part 1 (1999)

Irrigation equipment - Sprinkler pipes - Specification: Part 1 polyethylene pipes (First Revision)

All Sizes

14399 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.3(CLASSIFICATION OF PIPES)	-	300	Discount of 25% is applicable on Total Test Charges only for BIS
4.1(melt flow rating (MFR) shall not exceed 1.10 g/10 min.)	-	1100	Discount of 25% is applicable on Total Test Charges only for BIS
4.1.1(density shall be between 940.4 kg/m’ and 958.4 kg/m3 (both inclusive) when determined at 27°C according to procedure prescribed in Annex A of IS 7328. The value of the density shall also not differ from the nominal value by more than 3 kg/m2 as per 5.2.1.1 of IS 7328.)	-	500	Discount of 25% is applicable on Total Test Charges only for BIS
4.1.2(The MFR of the material shall be between 0.2 to 1.1 (both inclusive) when tested at 190 T at a nominal load of 50 N by the method prescribed in 7 of IS 2530. The MFR of the material shall also be within 20% of the value declared by the manufacturer.’)	-	1100	Discount of 25% is applicable on Total Test Charges only for BIS
Cl. 4.2 , IS 2530-1963, Cl. 10(Cabon Black Content)	-	925	Discount of 25% is applicable on Total Test Charges only for BIS
4.3(Anti-oxidant)	-	0	NA
5.1 table -1(DIMENSIONS OF PIPES)	-	500	Discount of 25% is applicable on Total Test Charges only for BIS
5.1.2(Ovality)	-	300	Discount of 25% is applicable on Total Test Charges only for BIS
6.1(VISUAL APPEARANCE)	-	300	Discount of 25% is applicable on Total Test Charges only for BIS
7.2(Reversion Test)	-	700	Discount of 25% is applicable on Total Test Charges only for BIS
7.5(Density)	-	500	Discount of 25% is applicable on Total Test Charges only for BIS
7.6(Melt now Rate (MFR))	-	1100	Discount of 25% is applicable on Total Test Charges only for BIS
(Cl.4.2)(Carbon black- b) Dispersion of carbon black)	-	700	Discount of 25% is applicable on Total Test Charges only for BIS
(Cl.4.2)(Carbon black- a)carbon content)	-	925	Discount of 25% is applicable on Total Test Charges only for BIS
Cl.7.3(Tensile Test - ii)Elongation at Break)	-	0	NA
Cl.7.4(Fusion Compatibility Test- a) Quality test)	-	4800	Discount of 25% is applicable on Total Test Charges only for BIS
Cl.7.4(Fusion Compatibility Test- b) Acceptance test)	-	1600	Discount of 25% is applicable on Total Test Charges only for BIS
Cl.7.3(Tensile Test- i) Tensile Strength)	-	1100	Discount of 25% is applicable on Total Test Charges only for BIS
Cl.5(Dimensions of pipe - ii) Wall thickness minimum)	-	300	Discount of 25% is applicable on Total Test Charges only for BIS
Cl.5(Dimensions of pipe - ii) Wall thickness maximum)	-	300	Discount of 25% is applicable on Total Test Charges only for BIS
Cl.5(Dimensions of pipe - i) Outside diameter)	-	500	Discount of 25% is applicable on Total Test Charges only for BIS
Cl 7.1(Hydraulic Characteristics - Quality test)	-	4800	Discount of 25% is applicable on Total Test Charges only for BIS
Cl 7.1(Hydraulic Characteristics - Acceptance test)	-	1600	Discount of 25% is applicable on Total Test Charges only for BIS

14 Dec, 2027

-
-

7987

Ace Test Labs & Metrology Pvt. Ltd., Sonipat

9162826

IS 16544 (2016)

All glass evacuated tubes solar water heating system

All

75000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Pre-Conditioning Test)	-	10000	-
6.2.1 (Annex - B)(Exterior Test)	-	10000	-
6.2.2 (Annex - C)(Leakage Test)	-	5000	-
6.2.3 (Annex - D)(Stagnation Test)	-	5000	-
6.2.4 (Annex - E)(External Thermal Shock Test)	-	5000	-
6.2.5 (Annex - F)(Internal Thermal Shock Test)	-	10000	-
6.2.6(Thermal Performance Test)	-	10000	-
6.2.7()	-	10000	-
5(General Requirements)	-	1000	-
6.1(Pre-Conditioning Test)	-	10000	-
6.2.1 (Annex - B)(Exterior Test)	-	10000	-
6.2.2 (Annex - C)(Leakage Test)	-	5000	-
6.2.3 (Annex - D)(Stagnation Test)	-	5000	-
6.2.4 (Annex - E)(External Thermal Shock Test)	-	5000	-
6.2.5 (Annex - F)(Internal Thermal Shock Test)	-	10000	-
6.2.6(Thermal Performance Test)	-	10000	-
6.2.7()	-	10000	-
5(General Requirements)	-	5000	-
6.1(Pre-Conditioning Test)	-	10000	-
6.2.1 (Annex - B)(Exterior Test)	-	10000	-
6.2.2 (Annex - C)(Leakage Test)	-	5000	-
6.2.3 (Annex - D)(Stagnation Test)	-	10000	-
6.2.4 (Annex - E)(External Thermal Shock Test)	-	10000	-
6.2.5 (Annex - F)(Internal Thermal Shock Test)	-	10000	-
6.2.6(Thermal Performance Test)	-	10000	-
6.2.7()	-	10000	-
5(General Requirements)	-	5000	-

14 Nov, 2027

-
Included w.e.f 04.03.2025

7988

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY - CIPET, HALDIA

5116334

IS 4985 (2000)

Unplasticized pvc pipes for potable water supplies - Specification (Third Revision)

Nominal Diameter up to 355 mm & all classes

25794 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1.2(PVC Resin)	-	1100	Discount of 25% is applicable on Total Test Charges only for BIS
5(CLASSIFICATION OF PIPES)	-	250	Discount of 25% is applicable on Total Test Charges only for BIS
7(DIMENSIONS-PIPE-Nominal Diameter)	-	250	Discount of 25% is applicable on Total Test Charges only for BIS
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Minimum))	-	250	Discount of 25% is applicable on Total Test Charges only for BIS
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Mamimum))	-	250	Discount of 25% is applicable on Total Test Charges only for BIS
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. Variation)	-	250	Discount of 25% is applicable on Total Test Charges only for BIS
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Minimum))	-	250	Discount of 25% is applicable on Total Test Charges only for BIS
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Maximum))	-	250	Discount of 25% is applicable on Total Test Charges only for BIS
7.1.1.2(DIMENSIONS-PIPE-Ovality (Maximum))	-	250	Discount of 25% is applicable on Total Test Charges only for BIS
7.1.2.1(DIMENSIONS-PIPE-Thickness(Minimum))	-	250	Discount of 25% is applicable on Total Test Charges only for BIS
7.1.2.1(DIMENSIONS-PIPE-Thickness(Maximum))	-	250	Discount of 25% is applicable on Total Test Charges only for BIS
7.1.2.1(DIMENSIONS-PIPE-Average Thickness)	-	250	Discount of 25% is applicable on Total Test Charges only for BIS
7.2.1(DIMENSIONS-Socket)	-	250	Discount of 25% is applicable on Total Test Charges only for BIS
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Minimum Length)	-	250	Discount of 25% is applicable on Total Test Charges only for BIS
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Minimum))	-	250	Discount of 25% is applicable on Total Test Charges only for BIS
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Maximum))	-	250	Discount of 25% is applicable on Total Test Charges only for BIS
7.2.1.1 Table3 (Angle of taper (Note-1))	-	250	Discount of 25% is applicable on Total Test Charges only for BIS
7.2.1.2(a)-Table 5(DIMENSIONS-Sockets for elastomeric sealing ring joints-Minimum depth of engagement)	-	250	Discount of 25% is applicable on Total Test Charges only for BIS
7.2.1.2-Table 4(DIMENSIONS-Sockets for elastomeric sealing ring joints-Socket inner Diameter)	-	250	Discount of 25% is applicable on Total Test Charges only for BIS
8(SEALING RINGS)	-	250	Discount of 25% is applicable on Total Test Charges only for BIS
9.1(PIPE ENDS)	-	250	Discount of 25% is applicable on Total Test Charges only for BIS
10.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	300	Discount of 25% is applicable on Total Test Charges only for BIS
10.1.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	0	NA
10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity)	-	575	Discount of 25% is applicable on Total Test Charges only for BIS
10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test)	-	900	Testing charges: 700 + specimen:200 Discount of 25% is applicable on Total Test Charges only for BIS
10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature)	-	1100	Discount of 25% is applicable on Total Test Charges only for BIS
10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density)	-	500	Discount of 25% is applicable on Total Test Charges only for BIS
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test))	-	11000	Discount of 25% is applicable on Total Test Charges only for BIS
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test))	-	850	Discount of 25% is applicable on Total Test Charges only for BIS
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)-for Integral Sealing Ring Sockets)	-	500	Discount of 25% is applicable on Total Test Charges only for BIS
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Integral Sealing Ring Sockets)	-	850	Discount of 25% is applicable on Total Test Charges only for BIS
11.1.1(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Plumbing pipes)	-	850	Discount of 25% is applicable on Total Test Charges only for BIS
11.2(Resistance to External Blows at 0°C)	-	1300	Testing charges: 1000 + specimen:300 Discount of 25% is applicable on Total Test Charges only for BIS
10.3(Effect on Water)	-	3000	Discount of 25% is applicable on Total Test Charges only for BIS
Clause 10.7(Sulphated Ash Content)	-	950	Discount of 25% is applicable on Total Test Charges only for BIS

14 Dec, 2027

-
-

7989

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY - CIPET, HALDIA

5116334

IS 14151 : Part 2 (2008)

Irrigation equipment - Sprinkler pipes - Specification: Part 2 quick coupled polyethylene pipes and fittings (Second Revision)

All Sizes

32306 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.3(Quick Coupled pipes)	-	19198	Discount of 25% is applicable on Total Test Charges only for BIS
Cl.4.1(Quick Coupled Male and Female Couplers)	-	6450	Discount of 25% is applicable on Total Test Charges only for BIS
4.1 (b)(HDPE couplers —)	-	0	NA
4.1 .1.2.1(HDPE couplers)	-	500	Discount of 25% is applicable on Total Test Charges only for BIS
4.1 .3(Workmanship and Appearance)	-	300	Discount of 25% is applicable on Total Test Charges only for BIS
4.1.4(a)(Holding Attachments for Coupler Parts)	-	850	Discount of 25% is applicable on Total Test Charges only for BIS
4.1.5(Rubber Ring)	-	1050	Discount of 25% is applicable on Total Test Charges only for BIS
Cl 4.1.5(Rubber rings- A)Shore hardness (Shore-A))	-	375	Discount of 25% is applicable on Total Test Charges only for BIS
Cl 4.1.5(Rubber rings- B) Change in hardness)	-	4575	375 Hardness test + 4200 Ageing Discount of 25% is applicable on Total Test Charges only for BIS
Cl 4.1.5(Rubber rings- C)Rubber ring shall be of black colour:)	-	300	Discount of 25% is applicable on Total Test Charges only for BIS
6.1(Quick Coupled Pipes and Fittings)	-	0	NA
6.1.1, 6.1.1.1(Leakage Test)	-	850	Discount of 25% is applicable on Total Test Charges only for BIS
6.1.2, 6.1.2.1( Hydraulic Proof Test)	-	850	Discount of 25% is applicable on Total Test Charges only for BIS
Cl.6.1.3(Weldability Test- a) Quality test)	-	1600	Discount of 25% is applicable on Total Test Charges only for BIS
Cl.6.1.3(Weldability Test- b) Acceptance test)	-	4800	Discount of 25% is applicable on Total Test Charges only for BIS

14 Dec, 2027

-
-

7990

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY - CIPET, HALDIA

5116334

IS 15801 (2008)

Polypropylene - Random copolymer pipes for hot and cold water supplies - Specification

All sizes

86756 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4( Designation)	-	0	NA
Cl 7(Dimensions Of Pipes)	-	250	Discount of 25% is applicable on Total Test Charges only for BIS
Cl 8(Visual Appearance)	-	300	Discount of 25% is applicable on Total Test Charges only for BIS
Cl 9.1(Hydraulic Characteristics)	-	18400	i) Acceptance test (1 h. / 20 oC ) = 1000 ii) Acceptance test (22 h. / 95 oC ) = 1600 iii) Type test (165 h. / 95 oC ) = 4800 iv) iii) Type test (1000 h. / 95 oC ) = 11000 Discount of 25% is applicable on Total Test Charges only for BIS
Cl 9.2(Fusion Compatibility)	-	4800	Discount of 25% is applicable on Total Test Charges only for BIS
Cl 9.3(Reversion Test )	-	1000	700 test charges + 300 specimen charges Discount of 25% is applicable on Total Test Charges only for BIS
Cl 9.4 & Annex B(Impact Strength)	-	1400	1100 test charges + 300 specimen charges Discount of 25% is applicable on Total Test Charges only for BIS
Cl 9.5(Density)	-	500	Discount of 25% is applicable on Total Test Charges only for BIS
Cl 9.6(Melt Flow Rate)	-	1100	Discount of 25% is applicable on Total Test Charges only for BIS
Cl 9.7(Carbon Black Content & Dispersion)	-	1625	925 CBC + 700 CBD Discount of 25% is applicable on Total Test Charges only for BIS
Cl 9.8(Thermal Stability By Hydrostatic Pressure Testing)	-	83825	Discount of 25% is applicable on Total Test Charges only for BIS
Cl 9.9(Opacity)	-	575	Discount of 25% is applicable on Total Test Charges only for BIS

14 Dec, 2027

-
-

7991

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY - CIPET, HALDIA

5116334

IS 10124 : Part 2 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 2 specific requirements for sockets (Second Revision)

All Sizes

1444 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2.2, and Fig. 2(Dimensions of Socket for Elastomeric Sealing Ring Joint)	-	500	Discount of 25% is applicable on Total Test Charges only for BIS
Clause 3.2.2, and Fig. 2.(Minimum wall thickness for working pressure)	-	0	NA
3.1(General)	-	1425	Opacity=575 + Short Term hydraulic test =850 Discount of 25% is applicable on Total Test Charges only for BIS

14 Dec, 2027

-
-

7992

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY - CIPET, HALDIA

5116334

IS 12818 (2010)

Unplasticized polyvinyl chloride (Pvc - U) screen and casing pipes for bore/tubewells - Specification (Second Revision)

All

8544 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Nominal Diameter)	-	0	NA
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Mean Outer Diameter of Pipe)	-	1000	All dimension charges of CS/CM/CD Discount of 25% is applicable on Total Test Charges only for BIS
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Outer Diameter at any point )	-	0	NA
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Mean Outer Diameter over Connection)	-	0	NA
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Wall thickness)	-	0	NA
7.2 and Table 5, 6 & 7 Fig 1B(Nominal Diameter)	-	0	NA
7.2 and Table 5, 6 & 7 Fig 1B(Mean Outer Diameter of Pipe, Min)	-	1000	All dimension charges of RMS/RDS Discount of 25% is applicable on Total Test Charges only for BIS
7.2 and Table 5, 6 & 7 Fig 1B(Mean Outer Diameter of Pipe , Max)	-	0	NA
7.1, 7.2 and Table 5, 6 & 7 Fig 1B(Outer Diameter at any point , Min)	-	0	NA
7.1, 7.2 and Table 5, 6 & 7 Fig 1B(Outer Diameter at any point, Max)	-	0	NA
7.1, 7.2 and Table 5, 6 & 7 Fig 1B(Mean outside dia over connection,mm (Take 4 reading and maximum valu reported))	-	0	NA
7.2 and Table 5, 6 & 7 Fig 1B(Wall thickness, Min)	-	0	NA
7.2 and Table 5, 6 & 7 Fig 1B(Wall thickness, Max)	-	0	NA
7.3.1(No.of Ribs)	-	0	NA
7.3.2(Rib height)	-	0	NA
7.4 Table 8 & 9 Fig 1(Effective length, l2)	-	0	NA
7.4 Table 8 & 9 Fig 1(Segmental length, l3)	-	0	NA
7.4 Table 8 & 9 Fig 1(Segmental length,mm for socket (average of 4.0))	-	0	NA
7.4 Table 8 & 9 Fig 1(Segmental length for Spigot (average of 4.0))	-	0	NA
7.5 and Table 10 Fig 2A & 2B(Summation of slot lengths over internal circumference of the cross- section.)	-	0	NA
7.5 and Table 10 Fig 2A & 2B(Minimum number of slots on the circumference of the cross-section.)	-	0	NA
7.5 and Table 10 Fig 2A & 2B(Approximate Free Passage Area, in Percent (Mean Value) for Width of Slot (w))	-	0	NA
8.1 to 8.3 and Table 11 &12 Fig 3A & 4A(THREADING OF SCREEN ANDCASING PIPES. IS 554.)	-	250	Discount of 25% is applicable on Total Test Charges only for BIS
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	250	Discount of 25% is applicable on Total Test Charges only for BIS
8.4(Sealing elements a. Elastomeric material b. Shore A hardness of sealing Elements )	-	375	Discount of 25% is applicable on Total Test Charges only for BIS
9.1(Visual Appearance)	-	300	Discount of 25% is applicable on Total Test Charges only for BIS
9.2(Internal Diameter)	-	350	Discount of 25% is applicable on Total Test Charges only for BIS
9.3(Density IS 12235 (Part 14))	-	500	Discount of 25% is applicable on Total Test Charges only for BIS
9.4 and Table 14(Resistance to External Blows at 0 ?C IS 12235 (Part 9))	-	1400	Testing charges:1100 + Specimen:300 Discount of 25% is applicable on Total Test Charges only for BIS
9.5(Tensile Strength IS 12235(Part 13))	-	1600	Testing charges:1100 + Specimen:500 Discount of 25% is applicable on Total Test Charges only for BIS
9.6(Vicat Softening Temperature IS 12235 (Part 2).)	-	1100	Discount of 25% is applicable on Total Test Charges only for BIS
9.7(Effect on Water a) Lead (first extraction) b) Lead (Third extraction) c) Dialkyl Tin C4 & higher homologues measured as Tin (Third extraction) d) Cadmium (All three extracts) e) Mercury (All three extracts) f) Other Toxic Substances )	-	3000	Discount of 25% is applicable on Total Test Charges only for BIS

14 Dec, 2027

-
-

7993

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY - CIPET, HALDIA

5116334

IS 4984 (2016)

Polyethylene pipes for water supply - Specification (Fifth Revision)

Upto 355 DN

31869 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5, 5.1 table-1(MATERIALS)	-	0	NA
5.2(Polyethylene Resin)	-	4525	Complete testing charges for Raw material Discount of 25% is applicable on Total Test Charges only for BIS
5.3 (a)(Carbon Black Master Batch)	-	1875	For CBC+ Ash content (925+950) Discount of 25% is applicable on Total Test Charges only for BIS
5.3(b)(Carbon Black Master Batch)	-	1875	For CBC+ Ash content (925+950) Discount of 25% is applicable on Total Test Charges only for BIS
5.3(c)(Carbon Black Master Batch)	-	1875	For CBC+ Ash content (925+950) Discount of 25% is applicable on Total Test Charges only for BIS
5.3(d)(Carbon Black Master Batch)	-	1875	For CBC+ Ash content (925+950) Discount of 25% is applicable on Total Test Charges only for BIS
5.3(e)(Carbon Black Master Batch)	-	1875	For CBC+ Ash content (925+950) Discount of 25% is applicable on Total Test Charges only for BIS
5.4(Anti oxydent)	-	0	NA
8.3(Carbon black)	-	925	Discount of 25% is applicable on Total Test Charges only for BIS
8.6(Overall migration)	-	2000	Testing charge:1700+ Specimen: 300 Discount of 25% is applicable on Total Test Charges only for BIS
6, 6.1(PIPE DESCRIPTION)	-	0	NA
6, 6.1.1(PIPE DESCRIPTION)	-	0	NA
6, 6.1.2(PIPE DESCRIPTION)	-	0	NA
6.1.3 (PIPE DESCRIPTION)	-	0	NA
6.1.4(PIPE DESCRIPTION)	-	0	NA
6.2(Colour)	-	250	Discount of 25% is applicable on Total Test Charges only for BIS
6.2.1(6.1.1 Identification Stripes)	-	250	Discount of 25% is applicable on Total Test Charges only for BIS
7.2(Length)	-	250	Discount of 25% is applicable on Total Test Charges only for BIS
Cl-7.4(Mean Outside Diameter (For upto 50 mm take 8 reading, above 50mm take 6 reading & average will be reported))	-	250	Discount of 25% is applicable on Total Test Charges only for BIS
7.4.1.2(Ovality)	-	250	Discount of 25% is applicable on Total Test Charges only for BIS
8,/8.1/8.1.1 table-5(PERFORMANCE REQUIREMENTS / Hydraulic Characteristics/ Internal Pressure Creep Rupture Test of Pipe)	-	21400	(a) Acceptance Test (48 hrs.)/80˚ C: 1600 + (b) Type Test (100 hrs.)/27˚ C:4000+ (c) Type test (165 hrs.)/80˚ C:4800 + (d) Type test (1000 hrs.)/80˚ C:11000. Discount of 25% is applicable on Total Test Charges only for BIS
8.1.2 table -5(Internal Pressure Creep Rupture Test of Pipe Joints)	-	1600	Discount of 25% is applicable on Total Test Charges only for BIS
8.2(Longitudinal Reversion Test)	-	900	Testing charge+ Specimen (700+200) Discount of 25% is applicable on Total Test Charges only for BIS
8.4( Melt Flow Rate)	-	1100	Discount of 25% is applicable on Total Test Charges only for BIS
8.5 (Oxidation Induction Time)	-	2200	Discount of 25% is applicable on Total Test Charges only for BIS
8.7(Density)	-	500	Discount of 25% is applicable on Total Test Charges only for BIS
8.8(Tensile Strength for Butt-fusion)	-	1600	Testing charges + Specimen ( 1100+500) Discount of 25% is applicable on Total Test Charges only for BIS
8.9 table-6(Elongation at Break)	-	1600	Testing charges + Specimen ( 1100+500) Discount of 25% is applicable on Total Test Charges only for BIS
8.10(Slow Crack Growth Rate)	-	6000	Testing charges + Specimen ( 5500+500) Discount of 25% is applicable on Total Test Charges only for BIS

14 Dec, 2027

-
-

7994

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY - CIPET, HALDIA

5116334

IS 11652 (2017)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg cement – Specification (third revision)

All Sizes

23380 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	250	Discount of 25% is applicable on Total Test Charges only for BIS
Fig. 1, Table 1 (i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm )	-	500	Discount of 25% is applicable on Total Test Charges only for BIS
Fig. 1- Table 1-Sr. no. i (Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm )	-	0	NA
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm )	-	0	NA
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm )	-	0	NA
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	NA
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0	NA
4.1(Raw Material )	-	2000	Discount of 25% is applicable on Total Test Charges only for BIS
4.3(Sacks)	-	300	Discount of 25% is applicable on Total Test Charges only for BIS
4.4(Seam )	-	2000	Discount of 25% is applicable on Total Test Charges only for BIS
4.4(Seam The two rows of stitches shall be separated from each other by minimum 5 mm and )	-	0	NA
4.4(Seam The outer stitch shall be minimum 8 mm from the outer edge of the sacks. )	-	0	NA
4.4(Seam The stitching shall be done with double fold over seam to)	-	0	NA
4.4(to a depth of minimum 25 mm, so that so that)	-	0	NA
4.4(that the stitches pass through a minimum of six layers of the fabric.)	-	0	NA
4.4(The number of stitches/dm shall be 14 ± 2.)	-	0	NA
4.5(Lamination )	-	2000	Discount of 25% is applicable on Total Test Charges only for BIS
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	400	Discount of 25% is applicable on Total Test Charges only for BIS
Fig. 1- Table 1- Sr. no. ii (Ends per dm - Annex B 40 ± 2 )	-	250	Discount of 25% is applicable on Total Test Charges only for BIS
Fig. 1- Table 1-Sr. no. iii (Picks per dm-Annex B 40 ± 2 )	-	250	Discount of 25% is applicable on Total Test Charges only for BIS
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) Non-gusseted type 70 + 6%)	-	500	Discount of 25% is applicable on Total Test Charges only for BIS
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) gusseted type 71 + 6%)	-	500	Discount of 25% is applicable on Total Test Charges only for BIS
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	1100	Discount of 25% is applicable on Total Test Charges only for BIS
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	1100	Discount of 25% is applicable on Total Test Charges only for BIS
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	1100	Discount of 25% is applicable on Total Test Charges only for BIS
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	1100	Discount of 25% is applicable on Total Test Charges only for BIS
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25)	-	0	NA
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25)	-	0	NA
5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure)	-	1100	Discount of 25% is applicable on Total Test Charges only for BIS
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	950	Discount of 25% is applicable on Total Test Charges only for BIS
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	0	Discount of 25% is applicable on Total Test Charges only for BIS
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to a) UV Radiation -Annex F )	-	12380	UV Exposure= 10180 + Breaking strength after exposure (lengthwise & width wise)= 2200 Discount of 25% is applicable on Total Test Charges only for BIS

14 Dec, 2027

-
-

7995

INDIAN TESTING LABORATORY PRIVATE LIMITED, GREATER NOIDA

8171306

IS 2082 (2018)

Stationary storage type electric water heaters - Specification (Fifth Revision)

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	20	-
7(Marking)	-	20	-
7(Marking)	-	20	-
7(Marking)	-	20	-
7(Marking)	-	20	-
7(Marking)	-	20	-
7(Marking)	-	20	-
7(Marking)	-	20	-
7(Marking)	-	20	-
7(Marking)	-	20	-
7(Marking)	-	20	-
7(Marking)	-	20	-
7(Marking)	-	20	-
7(Marking)	-	20	-
7(Marking)	-	20	-
7(Marking)	-	20	-
7(Marking)	-	20	-
7(Marking)	-	20	-
7(Marking)	-	20	-
7(Marking)	-	20	-
7(Marking)	-	20	-
7(Marking)	-	20	-
7(Marking)	-	20	-
7(Marking)	-	20	-
7(Marking)	-	20	-
7(Marking)	-	20	-
7(Marking)	-	20	-
7(Marking)	-	20	-
6(Classification )	-	25	-
6(Classification )	-	50	-
(Cl.8 of IS 302-2-21:2011)(Protection Against Access to Live Parts)	-	50	-
(Cl.10 of IS 302-2-21: 2011)(Power Input & Current)	-	100	-
(Cl.11 of 302-2-21:2011)(Heating)	-	50	-
(Cl.11 of 302-2-21:2011)(Heating)	-	50	-
(Cl.11 of 302-2-21:2011)(Heating)	-	50	-
(Cl.13 of IS 302-2-21:2011)(Leakage Current )	-	250	-
(Cl.13 of IS 302-2-21:2011)(Electrical Strength at Operating Temperature)	-	250	-
(Cl.14ofIS302-2-21:2011)(Transient Over Voltages)	-	250	-
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	250	-
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	250	-
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	250	-
(Cl.17 of IS 302-2-21:2011)(Overload protection of transformers & associated circuits)	-	100	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	250	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	250	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	250	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	250	-
(Cl.20 of IS 302-2-21:2011)(Stability & Mechanical Hazards)	-	50	-
(Cl.21ofIS302-2-21:2011)(Mechanical strength)	-	100	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	10	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	10	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	10	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	10	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	10	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	10	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	10	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	10	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	10	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	10	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	10	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	10	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	10	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	10	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	10	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	10	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	10	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	10	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	10	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	10	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	10	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	10	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	10	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	10	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	10	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	10	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	10	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	10	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	10	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	10	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	10	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	10	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	10	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	10	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	10	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	10	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	10	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	10	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	10	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	10	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	10	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	10	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	10	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	10	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	10	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	10	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	10	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	10	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	10	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	10	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	10	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	10	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	10	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	10	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	10	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	10	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	10	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	10	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	10	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	10	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	10	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	10	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	10	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	10	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	10	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	10	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	10	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	10	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	10	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	10	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	10	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	10	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	10	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	10	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	10	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	10	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	10	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	10	-
(Cl.24ofIS302-221:2011)(Component)	-	10	-
(Cl.24ofIS302-221:2011)(Component)	-	10	-
(Cl.24ofIS302-221:2011)(Component)	-	10	-
(Cl.24ofIS302-221:2011)(Component)	-	10	-
(Cl.24ofIS302-221:2011)(Component)	-	10	-
(Cl.24ofIS302-221:2011)(Component)	-	10	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	10	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	10	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	10	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	10	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	10	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	10	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	10	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	10	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	10	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	10	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	10	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	10	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	10	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	10	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	10	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	10	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	10	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	10	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	10	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	10	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	10	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	10	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	10	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	10	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	10	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	10	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	10	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	10	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	10	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	10	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	10	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	10	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	10	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	50	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	50	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	50	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	50	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	50	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	50	-
(Cl.28 of IS 302-2-21:2011)(Screws & Connections)	-	50	-
(Cl.29ofIS302-2-21:2011)(Clearances, Creepage Distances and Solid Insulation)	-	50	-
(Cl.30 of IS 302-2-21:2011)(Resistance to Heat & Fire)	-	50	-
(Cl.30 of IS 302-2-21:2011)(Resistance to Heat & Fire)	-	50	-
(Cl.31 of IS 302-2-21:2011)(Resistance to Rusting)	-	50	-
(Cl.15 of IS 2082:2018)(Verification of the Rated Capacity)	-	50	-
(Cl.16 of IS 2082:2018)(Standing Loss per 24 Hours)	-	3000	-
(Cl.17 of IS 2082:2018)(Hot Water Output)	-	1500	-
(Cl.18 of IS 2082:2018)( Reheating Time)	-	1500	-
(Cl.19 of IS 2082:2018)(Mixing Factor)	-	500	-
(Cl.20 of IS 2082:2018)(Deviation of Dial Calibration)	-	100	-
(Cl.21 of IS 2082:2018)(Cyclic Temperature Variation)	-	500	-
(Cl.22 of IS 2082:2018)(Finish)	-	50	-
Cl.22 of IS 2082:2018(Finish)	-	50	-
Cl.21 of IS 2082:2018(Cyclic Temperature Variation)	-	100	-
Cl.20 of IS 2082:2018(Deviation of Dial Calibration)	-	25	-
Cl.19 of IS 2082:2018(Mixing Factor)	-	50	-
Cl.18 of IS 2082:2018( Reheating Time)	-	100	-
Cl.17 of IS 2082:2018(Hot Water Output)	-	100	-
Cl.16 of IS 2082:2018(Standing Loss per 24 Hours)	-	100	-
Cl.15 of IS 2082:2018(Verification of the Rated Capacity)	-	50	-
Cl.31 of IS 302-2-21:2018(Resistance to Rusting)	-	100	-
Cl.30.2 of IS 302-1:2008(Resistance to Heat & Fire : Glow wire test )	-	50	-
Cl.30.1 of IS 302-1:2008(Resistance to Heat & Fire : Ball pressure test )	-	50	-
Cl.29.2 of IS 302-1:2008(Clearances, Creepage Distances and Solid Insulation : Creepage distance )	-	50	-
Cl.29.1 of IS 302-1:2008(Clearances, Creepage Distances and Solid Insulation : Clearance distance )	-	50	-
Cl.28 of IS 302-2-21:2018(Screws & Connections)	-	50	-
Cl.27.5 of IS 302-1:2008(Provision for Earthing : ECR )	-	20	-
Cl.27 of IS 302-2-21:2018(Provision for Earthing)	-	20	-
Cl.26 of IS 302-2-21: 2018(Terminals for External Conductors)	-	20	-
Cl.25.18 of IS 302-1:2008(Supply Connection & External Flexible Cords)	-	20	-
Cl.25.15 of IS 302-1:2008(Supply Connection & External Flexible Cords : Cord grip test - displacement )	-	20	-
Cl.25.15 of IS 302-1:2008(Supply Connection & External Flexible Cords : Cord grip test )	-	20	-
Cl.25.12 of IS 302-1:2008(Supply Connection & External Flexible Cords : Moulding of supply cord )	-	20	-
Cl.25.10 of IS 302-1:2008(Supply Connection & External Flexible Cords : Colour of Earthing conductor )	-	20	-
Cl.25.5 of IS 302-1:2008(Supply Connection & External Flexible Cords : Type of attachment )	-	20	-
Cl.25 of IS 302-2-21:2018(Supply Connection & External Flexible Cords : connection to the supply mains)	-	20	-
Cl.24.102 of IS 302-221:2018(Component : Operation of thermal cut-out )	-	20	-
Cl.24.101 of IS302-221:2018(Component : Location of non self reseting thermal cut out )	-	20	-
Cl.24of IS 302-221:2018(Component : Relevent Indian standards )	-	20	-
Cl. 23 of IS 302-1:2008(Internal Wiring : color identification for earthing conductor )	-	20	-
Cl. 23 of IS 302-1:2008(Internal Wiring )	-	20	-
Cl.22.111 of IS 302-2-21:2018(Construction : Resistance to vacuum )	-	20	-
Cl.22.110 of IS 302-2-21:2018(Construction : meterial of connections )	-	20	-
Cl.22.110 of IS 302-2-21:2018(Construction : Material of Inner conatiner )	-	20	-
Cl.22.109 of IS 302-2-21:2018(Construction : Drain for appliance having a capacity of more than 15 liter)	-	20	-
Cl.22.108 of IS 302-2-21:2018(Construction : fixing to wall )	-	20	-
Cl.22.107 of IS 302-2-21:2018(Construction : Position of Heating elements and thermal control sensor)	-	20	-
Cl.22.106 of IS 302-2-21:2018(Construction : Operation of thermal cut- out )	-	20	-
Cl.22.104 of IS 302-2-21:2018(Construction : Outlet of open outlet heater )	-	20	-
Cl.22.103 of IS 302-2-21:2018(Construction : Operation of Pressure relieve devices )	-	20	-
Cl.22.102 of IS 302-2-21:2018(Construction : repeated drawing of water temp )	-	20	-
Cl.22.101 of IS 302-2-21:2018(Construction : rated pressure of closed water heater )	-	20	-
Cl.22.47 of IS 302-2-21:2018 (Construction : Water pressure test )	-	20	-
Cl.22.44 of IS 302-1:2008(Construction : Shape and decoration of enclosure)	-	20	-
Cl.22.34, Cl 22.35 of IS 302-1:2008(Construction : Shaft of operating Knobs )	-	20	-
Cl.22.33 of IS 302-1:2008(Construction : Direct contact of liquids )	-	20	-
Cl 22.26 ,Cl.22.28, Cl 22.29, Cl 22.30 , Cl 22.31, Cl 22.32 of IS 302-1:2008(Construction : Supplymentry/ double / reinforced insulation for Class II/ Class III appliance )	-	20	-
Cl.22.18 Of IS 302-1:2008(Construction : Resistance to corrosion )	-	20	-
Cl.22.17 of IS 302-1:2008(Construction : Spacers )	-	20	-
Cl.22.14 of IS 302-1:2008(Construction : ragged or sharp edges)	-	20	-
Cl.22.12 of IS 302-1:2008(Construction : Fixing of Handle, knob, grips, levers and similar parts)	-	20	-
Cl.22.11 of IS 302-1:2008(Construction : Fixing of non detachable part )	-	20	-
Cl.22.7 of IS 302-1:2008(Construction: adequate safeguards against the risk of excessive pressure)	-	20	-
Cl.22.6 of IS 302-2-21:2018(Construction : Size of drain hole )	-	20	-
Cl.22.6 of IS 302-1:2008(Construction : Effect of water on 3 insulation )	-	20	-
Cl.22.2 of IS 302-1:2008(Construction : Provision to ensure all pole disconnection )	-	70	-
Cl.22.1 of IS 302-1:2008(Construction : IP test )	-	70	-
Cl.21.2 of IS 302-1:2008(Mechanical strength : prevent penetration by sharp implements. )	-	70	-
Cl.21.1 of IS 302-1:2008(Mechanical strength : Rough handling in normal use)	-	60	-
Cl.20 of IS 302-1:2008(Stability & Mechanical Hazards)	-	220	-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : leakage from container during test)	-	110	-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : High Voltage )	-	110	-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : Insulation of the supply cable or cord)	-	110	-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : Wall ceiling temp. of test corner )	-	110	-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : emission of flame or molten metal or poisonous or ignitable gas )	-	510	-
Cl.16 of IS 302-2-21-2018(Leakage current and Electric strength (After humidity): Electric Strentgh )	-	110	-
Cl.16 of IS 302-2-21-2018(Leakage current and Electric strength (After humidity): Leakage current )	-	110	-
Cl.15 of IS 302-2-21-2018(Moisture Resistance)	-	110	-
Cl.14 of IS 302-2-21:2018(Transient Over Voltages)	-	10	-
Cl.13 of IS 302-2-21:2018(3 Strength at Operating Temperature)	-	10	-
Cl.13 of IS 302-2-21:2018(Leakage Current )	-	260	-
Cl.11 of 302-2-21:2018(Heating : Room Temp.)	-	160	-
Cl.11 of 302-2-21:2018(Heating : Temp of Rubber or PVC insulation of internal and external wiring)	-	10	-
Cl.11 of 302-2-21:2018(Heating : Temp of Walls, ceilings and floor of the test corner )	-	10	-
Cl.10 of IS 302-2-21: 2018(Power Input & Current)	-	10	-
Cl.8 of IS 302-2-21:2018(Protection Against Access to Live Parts)	-	10	-
7.101(Marking : Indifiction of water inlet and water outlet )	-	10	-
7.14(Marking : Legibility and durability)	-	10	-
7.13(Marking : Official language of Instruction )	-	10	-
7.11(Marking : Indication of controls )	-	10	-
7.8(Marking : Terminals )	-	10	-
7.6(Marking : Symbol used )	-	10	-
7.1(Marking : Warning for Open- outlet )	-	10	-
7.1(Marking : Statement for pressure reducing valve ( For rated pressure less than 0.6 MPa))	-	10	-
7.1(Marking : Statement for a pressure-relief device)	-	10	-
7.1(Marking : Rated capacity)	-	10	-
7.1(Marking : Rated pressure)	-	10	-
7.1(Marking : Country of manufacture)	-	10	-
7.1(Marking: IP Number)	-	10	-
7.1(Marking: Symbol for Class II)	-	10	-
7.1(Marking: Model or type reference)	-	10	-
7.1(Marking: Name, trademark or identification mark of manufacturer )	-	10	-
7.1(Marking : Rated power input)	-	10	-
7.1(Marking : Symbol for nature of supply )	-	10	-
7.1(Marking : Rated Voltage )	-	10	-
Cl.32 of IS 302-1:2008()	-	10	-
4(GENERAL REQUIREMENT)	-	10	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	10	-
12(THERMOSTAT SETTING)	-	260	-
Cl-10(Mounting of the water heater)	-	10	-
Cl-11(Measurements of stored water temperature)	-	10	-
Cl-12(Thermostat setting)	-	150	-
Cl-13(Measurement of energy consumption)	-	510	-
Cl-14(Verification of the rated capacity)	-	10	-
(Cl.22 of IS 302-2-21:2018)(Constructions)	-	10	-
(Cl.22 of IS 302-2-21:2018)(Constructions)	-	10	-
(Cl.22.108 of IS 302-2-21:2018)(Constructions)	-	10	-
(Cl.22.6 of IS 302-2-21:2018)(Constructions)	-	10	-
(Cl.22.47 of IS 302-2-21:2018)(Constructions)	-	10	-
(Cl.22.47 of IS 302-2-21:2018)(Constructions)	-	10	-
(Cl.22.47 of IS 302-2-21:2018)(Constructions)	-	10	-
(Cl.22.47 of IS 302-2-21:2018)(Constructions)	-	10	-
(Cl.22.47 of IS 302-2-21:2018)(Constructions)	-	10	-
(Cl.22.101 of IS 302-2-21:2018)(Constructions)	-	10	-
(Cl.22.105 of IS 302-2-21:2018)(Constructions)	-	10	-
(Cl.22.101 of IS 302-2-21:2018)(Constructions)	-	10	-
(Cl.22.103 of IS 302-2-21:2018)(Constructions)	-	10	-
(Cl.22.104 of IS 302-2-21:2018)(Constructions)	-	10	-
(Cl.22.104 of IS 302-2-21:2018)(Constructions)	-	10	-
(Cl.22.105 of IS 302-2-21:2018)(Constructions)	-	10	-
(Cl.22.109 of IS 302-2-21:2018)(Constructions)	-	10	-
(Cl.24.101 of IS 302-2-21:2018)(Components)	-	10	-
(Cl.25 of IS 302-2-21:2018)(Supply Connection and External Flexible cords)	-	10	-
Cl.25.8 of IS 302-2-21:2018(Supply Connection & External Flexible Cords : Resistance of supply cord )	-	10	-
7(Marking)	-	-	-
7(Marking)	-	-	-
7(Marking)	-	-	-
7(Marking)	-	-	-
7(Marking)	-	-	-
7(Marking)	-	-	-
7(Marking)	-	-	-
7(Marking)	-	-	-
7(Marking)	-	-	-
7(Marking)	-	-	-
7(Marking)	-	-	-
7(Marking)	-	-	-
7(Marking)	-	-	-
7(Marking)	-	-	-
7(Marking)	-	-	-
7(Marking)	-	-	-
7(Marking)	-	-	-
7(Marking)	-	-	-
7(Marking)	-	-	-
7(Marking)	-	-	-
7(Marking)	-	-	-
7(Marking)	-	-	-
7(Marking)	-	-	-
7(Marking)	-	-	-
7(Marking)	-	-	-
7(Marking)	-	-	-
7(Marking)	-	-	-
7(Marking)	-	-	-
6(Classification )	-	-	-
6(Classification )	-	-	-
(Cl.8 of IS 302-2-21:2011)(Protection Against Access to Live Parts)	-	-	-
(Cl.10 of IS 302-2-21: 2011)(Power Input & Current)	-	-	-
(Cl.11 of 302-2-21:2011)(Heating)	-	-	-
(Cl.11 of 302-2-21:2011)(Heating)	-	-	-
(Cl.11 of 302-2-21:2011)(Heating)	-	-	-
(Cl.13 of IS 302-2-21:2011)(Leakage Current )	-	-	-
(Cl.13 of IS 302-2-21:2011)(Electrical Strength at Operating Temperature)	-	-	-
(Cl.14ofIS302-2-21:2011)(Transient Over Voltages)	-	-	-
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	-	-
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	-	-
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	-	-
(Cl.17 of IS 302-2-21:2011)(Overload protection of transformers & associated circuits)	-	-	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	-	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	-	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	-	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	-	-
(Cl.20 of IS 302-2-21:2011)(Stability & Mechanical Hazards)	-	-	-
(Cl.21ofIS302-2-21:2011)(Mechanical strength)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	-	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	-	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	-	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	-	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	-	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	-	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	-	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	-	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	-	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	-	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	-	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	-	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	-	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	-	-
(Cl.24ofIS302-221:2011)(Component)	-	-	-
(Cl.24ofIS302-221:2011)(Component)	-	-	-
(Cl.24ofIS302-221:2011)(Component)	-	-	-
(Cl.24ofIS302-221:2011)(Component)	-	-	-
(Cl.24ofIS302-221:2011)(Component)	-	-	-
(Cl.24ofIS302-221:2011)(Component)	-	-	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	-	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	-	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	-	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	-	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	-	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	-	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	-	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	-	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	-	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	-	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	-	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	-	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	-	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	-	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	-	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	-	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	-	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	-	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	-	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	-	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	-	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	-	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	-	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	-	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	-	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	-	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	-	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	-	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	-	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	-	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	-	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	-	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	-	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	-	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	-	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	-	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	-	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	-	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	-	-
(Cl.28 of IS 302-2-21:2011)(Screws & Connections)	-	-	-
(Cl.29ofIS302-2-21:2011)(Clearances, Creepage Distances and Solid Insulation)	-	-	-
(Cl.30 of IS 302-2-21:2011)(Resistance to Heat & Fire)	-	-	-
(Cl.30 of IS 302-2-21:2011)(Resistance to Heat & Fire)	-	-	-
(Cl.31 of IS 302-2-21:2011)(Resistance to Rusting)	-	-	-
(Cl.15 of IS 2082:2018)(Verification of the Rated Capacity)	-	-	-
(Cl.16 of IS 2082:2018)(Standing Loss per 24 Hours)	-	-	-
(Cl.17 of IS 2082:2018)(Hot Water Output)	-	-	-
(Cl.18 of IS 2082:2018)( Reheating Time)	-	-	-
(Cl.19 of IS 2082:2018)(Mixing Factor)	-	-	-
(Cl.20 of IS 2082:2018)(Deviation of Dial Calibration)	-	-	-
(Cl.21 of IS 2082:2018)(Cyclic Temperature Variation)	-	-	-
(Cl.22 of IS 2082:2018)(Finish)	-	-	-
Cl.32 of IS 302-1:2008()	-	-	-
4(GENERAL REQUIREMENT)	-	-	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	-	-
12(THERMOSTAT SETTING)	-	-	-
Cl-10(Mounting of the water heater)	-	-	-
Cl-11(Measurements of stored water temperature)	-	-	-
Cl-12(Thermostat setting)	-	-	-
Cl-13(Measurement of energy consumption)	-	-	-
Cl-14(Verification of the rated capacity)	-	-	-
(Cl.22 of IS 302-2-21:2018)(Constructions)	-	-	-
(Cl.22 of IS 302-2-21:2018)(Constructions)	-	-	-
(Cl.22.108 of IS 302-2-21:2018)(Constructions)	-	-	-
(Cl.22.6 of IS 302-2-21:2018)(Constructions)	-	-	-
(Cl.22.47 of IS 302-2-21:2018)(Constructions)	-	-	-
(Cl.22.47 of IS 302-2-21:2018)(Constructions)	-	-	-
(Cl.22.47 of IS 302-2-21:2018)(Constructions)	-	-	-
(Cl.22.47 of IS 302-2-21:2018)(Constructions)	-	-	-
(Cl.22.47 of IS 302-2-21:2018)(Constructions)	-	-	-
(Cl.22.101 of IS 302-2-21:2018)(Constructions)	-	-	-
(Cl.22.105 of IS 302-2-21:2018)(Constructions)	-	-	-
(Cl.22.101 of IS 302-2-21:2018)(Constructions)	-	-	-
(Cl.22.103 of IS 302-2-21:2018)(Constructions)	-	-	-
(Cl.22.104 of IS 302-2-21:2018)(Constructions)	-	-	-
(Cl.22.104 of IS 302-2-21:2018)(Constructions)	-	-	-
(Cl.22.105 of IS 302-2-21:2018)(Constructions)	-	-	-
(Cl.22.109 of IS 302-2-21:2018)(Constructions)	-	-	-
(Cl.24.101 of IS 302-2-21:2018)(Components)	-	-	-
(Cl.25 of IS 302-2-21:2018)(Supply Connection and External Flexible cords)	-	-	-

15 Aug, 2028

-
Included w.e.f 07.01.2025

7996

BIS, Eastern Regional Laboratory (ERL)

None

IS 863 (2023)

Medical Textiles - Cotton bandage cloth - Specification third revision of IS 863

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.2, Table 1, ii) (Threads, dm, Min)	-
4.2, Table 1, iii) (Mass, g/m2)	-
4.2, Table 1, iv) (Length, m, tolerance)	-
4.2, Table 1, v) (Width, m, tolerance)	-
4.2, Table 1, ix) (Colour fastness: b) Washing (A1))	-
4.3 (Cleanliness–Microbial/Bioburden Test)	-

-
Mech: All tests except 3.1 Yarn, 4.1 Fiber identification, Table 2 (Color fastness to light and sterility (optional))

7997

ADARSH SCIENTIFIC RESEARCH CENTER AND TESTING LABORATORY PVT. LTD., PANVEL

7175806

IS 13428 (2024)

PACKAGED NATURAL MINERAL WATER - SPECIFICATION Third Revision

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1.1(Escherichia coli)	-	150	-
6.1.2(Coliform)	-	150	-
6.1.3(Faecal Streptococci)	-	150	-
6.1.4(Sulphite Reducing Anaerobe)	-	150	-
6.1.5(Pseudomonas aeruginosa)	-	150	-
6.1.6(Yeast and moould)	-	150	-
6.1.7(Salmonella)	-	150	-
6.1.8(Vibrio Cholera)	-	150	-
6.2/Table 1/i(Colour)	-	50	-
6.2/Table 1/ii(Odour)	-	100	-
6.2/Table 1/iii(Taste)	-	100	-
6.2/Table 1/iv(Turbidity)	-	150	-
6.2/Table 1/v(Total Dissoved)	-	200	-
6.2/Table 1/vi(pH Value)	-	50	-
6.2/Table 2/i(Nitrate)	-	200	-
6.2/Table 2/ii(Nitrite)	-	200	-
6.2/Table 2/iii(Sulphide)	-	200	-
6.2/Table 2/iv(Manganese)	-	150	-
6.2/Table 2/v(Copper)	-	150	-
6.2/Table 2/vi(Fluoride)	-	100	-
6.2/Table 2/vii(Barium)	-	150	-
6.2/Table 2/viii(Antimony)	-	150	-
6.2/Table 2/ix(Borate)	-	150	-
6.2/Table 2/x(Silver)	-	150	-
6.2/Table 2/xi(Chloride)	-	100	-
6.2/Table 2/xii(Sulphate)	-	150	-
6.2/Table 2/xiii(Magnesium)	-	150	-
6.2/Table 2/xiv(Calcium)	-	150	-
Cl-6.1.7(Shigella)	-	150	-
Cl-6.1.3(Staphylococcus aureus)	-	150	-
Cl-6.1.8(V. parahaemolyticus)	-	150	-
6.2/Table 2/xv(Sodium)	-	150	-
6.2/Table 2/xvi(Alkalinity)	-	100	-
6.2/Table 2/xvii(Selenium)	-	150	-
6.2/Table 2/xviii(Mineral Oil)	-	200	-
6.2/Table 2/xix(Phenolic Compounds)	-	200	-
6.2/Table 2/xx(Anionic Surface active agents)	-	200	-
6.2/Table 3/i(Arsenic)	-	150	-
6.2/Table 3/ii(Cadmium)	-	150	-
6.2/Table 3/iii(Cyanide)	-	250	-
6.2/Table 3/iv(Chromium)	-	150	-
6.2/Table 3/v(Mercury)	-	150	-
6.2/Table 3/vi(Lead)	-	150	-
6.2/Table 3/vii(Nickel)	-	150	-
6.2/Table 3/viii(Polychlorinated biphenyle (PCB))	-	300	-
6.2/Table 3/ix(Polynuclear aromatic hydrocarbons)	-	300	-
6.2/Table 3/x(Uranium)	-	250	-
Cl- 6.3, Annex N (i)(P,P -DDE)	-	300	-
Cl- 6.3, Annex N (i)(O,P -DDE)	-	300	-
Cl- 6.3, Annex N (i)(P,P- DDT)	-	300	-
Cl- 6.3, Annex N (i)(O,P -DDT)	-	300	-
Cl-6.3, Annex N (i)(P,P- DDD)	-	300	-
Cl-6.3, Annex N (i)(O,P-DDD)	-	300	-
Cl- 6.3, Annex N (ii)(γ-HCH (lindane))	-	300	-
Cl- 6.3, Annex N (iii)(α-HCH)	-	300	-
Cl- 6.3, Annex N (iii)(β-HCH)	-	300	-
Cl- 6.3, Annex N (iii)(δ - HCH)	-	300	-
Cl- 6.3, Annex N (iv)(Endosulfan - α)	-	300	-
Cl- 6.3, Annex N (iv)(Endosulfan - β)	-	300	-
Cl- 6.3, Annex N (iv)(Endosulfan - sulphate)	-	300	-
Cl- 6.3, Annex N (v)(Monocrotophos)	-	300	-
Cl- 6.3, Annex N (vi)(Ethion)	-	300	-
Cl- 6.3, Annex N (vii)(Chlorpyrifos)	-	300	-
Cl- 6.3, Annex N (viii)(Phorate and its oxygen analogue)	-	300	-
Cl- 6.3, Annex N (viii)(phorate sulphoxide)	-	300	-
Cl- 6.3, Annex N (viii)(phorate sulphone)	-	300	-
Cl- 6.3, Annex N (ix)(2,4-D)	-	300	-
Cl- 6.3, Annex N (x)(Butachlor)	-	300	-
Cl- 6.3, Annex N (xi)(Isoproturon)	-	300	-
Cl- 6.3, Annex N (xii)(Alachlor)	-	300	-
Cl- 6.3, Annex N (xiii)(Atrazine)	-	300	-
Cl- 6.3, Annex N (xiv)(Methyl parathion)	-	300	-
Cl- 6.3, Annex N (xiv)(Methyl paraoxon)	-	300	-
Cl- 6.3, Annex N (xv)(Malathion)	-	300	-
Cl- 6.3, Annex N (xv)(malaoxon)	-	300	-
Cl- 6.3, Annex N (xvi)(Aldrin)	-	300	-
6.2/Table 4/i(Alpha emitters, Bq/l, Max)	-	0	Not Applicable
6.2/Table 4/ii(Beta emitters, Bq/l, Max)	-	0	Not Applicable
Cl-6.3, Annex N (XVI)(Dieldrin)	-	300	-
6.1.1(Escherichia coli)	-	150	-
6.1.2(Coliform)	-	150	-
6.1.3(Faecal Streptococci)	-	150	-
6.1.4(Sulphite Reducing Anaerobe)	-	150	-
6.1.5(Pseudomonas aeruginosa)	-	150	-
6.1.6(Yeast and moould)	-	150	-
6.1.7(Salmonella)	-	150	-
6.1.8(Vibrio Cholera)	-	150	-
6.2/Table 1/i(Colour)	-	100	-
6.2/Table 1/ii(Odour)	-	100	-
6.2/Table 1/iii(Taste)	-	50	-
6.2/Table 1/iv(Turbidity)	-	150	-
6.2/Table 1/v(Total Dissoved)	-	100	-
6.2/Table 1/vi(pH Value)	-	50	-
6.2/Table 2/i(Nitrate)	-	100	-
6.2/Table 2/ii(Nitrite)	-	100	-
6.2/Table 2/iii(Sulphide)	-	150	-
6.2/Table 2/iv(Manganese)	-	150	-
6.2/Table 2/v(Copper)	-	150	-
6.2/Table 2/vi(Fluoride)	-	100	-
6.2/Table 2/vii(Barium)	-	150	-
6.2/Table 2/viii(Antimony)	-	150	-
6.2/Table 2/ix(Borate)	-	150	-
6.2/Table 2/x(Silver)	-	150	-
6.2/Table 2/xi(Chloride)	-	100	-
6.2/Table 2/xii(Sulphate)	-	100	-
6.2/Table 2/xiii(Magnesium)	-	100	-
6.2/Table 2/xiv(Calcium)	-	100	-
Cl-6.1.7(Shigella)	-	150	-
Cl-6.1.3(Staphylococcus aureus)	-	150	-
Cl-6.1.8(V. parahaemolyticus)	-	150	-
6.2/Table 2/xv(Sodium)	-	150	-
6.2/Table 2/xvi(Alkalinity)	-	100	-
6.2/Table 2/xvii(Selenium)	-	150	-
6.2/Table 2/xviii(Mineral Oil)	-	200	-
6.2/Table 2/xix(Phenolic Compounds)	-	100	-
6.2/Table 2/xx(Anionic Surface active agents)	-	200	-
6.2/Table 3/i(Arsenic)	-	150	-
6.2/Table 3/ii(Cadmium)	-	150	-
6.2/Table 3/iii(Cyanide)	-	200	-
6.2/Table 3/iv(Chromium)	-	150	-
6.2/Table 3/v(Mercury)	-	150	-
6.2/Table 3/vi(Lead)	-	150	-
6.2/Table 3/vii(Nickel)	-	150	-
6.2/Table 3/viii(Polychlorinated biphenyle (PCB))	-	300	-
6.2/Table 3/ix(Polynuclear aromatic hydrocarbons)	-	300	-
6.2/Table 3/x(Uranium)	-	150	-
Cl- 6.3, Annex N (i)(P,P -DDE)	-	300	-
Cl- 6.3, Annex N (i)(O,P -DDE)	-	300	-
Cl- 6.3, Annex N (i)(P,P- DDT)	-	300	-
Cl- 6.3, Annex N (i)(O,P -DDT)	-	300	-
Cl-6.3, Annex N (i)(P,P- DDD)	-	300	-
Cl-6.3, Annex N (i)(O,P-DDD)	-	300	-
Cl- 6.3, Annex N (ii)(γ-HCH (lindane))	-	300	-
Cl- 6.3, Annex N (iii)(α-HCH)	-	300	-
Cl- 6.3, Annex N (iii)(β-HCH)	-	300	-
Cl- 6.3, Annex N (iii)(δ - HCH)	-	300	-
Cl- 6.3, Annex N (iv)(Endosulfan - α)	-	300	-
Cl- 6.3, Annex N (iv)(Endosulfan - β)	-	300	-
Cl- 6.3, Annex N (iv)(Endosulfan - sulphate)	-	300	-
Cl- 6.3, Annex N (v)(Monocrotophos)	-	300	-
Cl- 6.3, Annex N (vi)(Ethion)	-	300	-
Cl- 6.3, Annex N (vii)(Chlorpyrifos)	-	300	-
Cl- 6.3, Annex N (viii)(Phorate and its oxygen analogue)	-	300	-
Cl- 6.3, Annex N (viii)(phorate sulphoxide)	-	300	-
Cl- 6.3, Annex N (viii)(phorate sulphone)	-	300	-
Cl- 6.3, Annex N (ix)(2,4-D)	-	300	-
Cl- 6.3, Annex N (x)(Butachlor)	-	300	-
Cl- 6.3, Annex N (xi)(Isoproturon)	-	300	-
Cl- 6.3, Annex N (xii)(Alachlor)	-	300	-
Cl- 6.3, Annex N (xiii)(Atrazine)	-	300	-
Cl- 6.3, Annex N (xiv)(Methyl parathion)	-	300	-
Cl- 6.3, Annex N (xiv)(Methyl paraoxon)	-	300	-
Cl- 6.3, Annex N (xv)(Malathion)	-	300	-
Cl- 6.3, Annex N (xv)(malaoxon)	-	300	-
Cl- 6.3, Annex N (xvi)(Aldrin)	-	300	-
6.2/Table 4/i(Alpha emitters, Bq/l, Max)	-	0	-
6.2/Table 4/ii(Beta emitters, Bq/l, Max)	-	0	-
Cl-6.3, Annex N (XVI)(Dieldrin)	-	300	-
6.1.1(Escherichia coli)	-	150	-
6.1.2(Coliform)	-	150	-
6.1.3(Faecal Streptococci)	-	150	-
6.1.4(Sulphite Reducing Anaerobe)	-	150	-
6.1.5(Pseudomonas aeruginosa)	-	150	-
6.1.6(Yeast and moould)	-	150	-
6.1.7(Salmonella)	-	150	-
6.1.8(Vibrio Cholera)	-	150	-
6.2/Table 1/i(Colour)	-	50	-
6.2/Table 1/ii(Odour)	-	50	-
6.2/Table 1/iii(Taste)	-	50	-
6.2/Table 1/iv(Turbidity)	-	100	-
6.2/Table 1/v(Total Dissoved)	-	150	-
6.2/Table 1/vi(pH Value)	-	50	-
6.2/Table 2/i(Nitrate)	-	150	-
6.2/Table 2/ii(Nitrite)	-	150	-
6.2/Table 2/iii(Sulphide)	-	150	-
6.2/Table 2/iv(Manganese)	-	150	-
6.2/Table 2/v(Copper)	-	150	-
6.2/Table 2/vi(Fluoride)	-	150	-
6.2/Table 2/vii(Barium)	-	150	-
6.2/Table 2/viii(Antimony)	-	150	-
6.2/Table 2/ix(Borate)	-	200	-
6.2/Table 2/x(Silver)	-	150	-
6.2/Table 2/xi(Chloride)	-	150	-
6.2/Table 2/xii(Sulphate)	-	150	-
6.2/Table 2/xiii(Magnesium)	-	150	-
6.2/Table 2/xiv(Calcium)	-	150	-
Cl-6.1.7(Shigella)	-	150	-
Cl-6.1.3(Staphylococcus aureus)	-	150	-
Cl-6.1.8(V. parahaemolyticus)	-	150	-
6.2/Table 2/xv(Sodium)	-	150	-
6.2/Table 2/xvi(Alkalinity)	-	150	-
6.2/Table 2/xvii(Selenium)	-	150	-
6.2/Table 2/xviii(Mineral Oil)	-	250	-
6.2/Table 2/xix(Phenolic Compounds)	-	250	-
6.2/Table 2/xx(Anionic Surface active agents)	-	250	-
6.2/Table 3/i(Arsenic)	-	150	-
6.2/Table 3/ii(Cadmium)	-	150	-
6.2/Table 3/iii(Cyanide)	-	250	-
6.2/Table 3/iv(Chromium)	-	150	-
6.2/Table 3/v(Mercury)	-	150	-
6.2/Table 3/vi(Lead)	-	150	-
6.2/Table 3/vii(Nickel)	-	150	-
6.2/Table 3/viii(Polychlorinated biphenyle (PCB))	-	300	-
6.2/Table 3/ix(Polynuclear aromatic hydrocarbons)	-	300	-
6.2/Table 3/x(Uranium)	-	300	-
Cl- 6.3, Annex N (i)(P,P -DDE)	-	300	-
Cl- 6.3, Annex N (i)(O,P -DDE)	-	300	-
Cl- 6.3, Annex N (i)(P,P- DDT)	-	300	-
Cl- 6.3, Annex N (i)(O,P -DDT)	-	300	-
Cl-6.3, Annex N (i)(P,P- DDD)	-	300	-
Cl-6.3, Annex N (i)(O,P-DDD)	-	300	-
Cl- 6.3, Annex N (ii)(γ-HCH (lindane))	-	300	-
Cl- 6.3, Annex N (iii)(α-HCH)	-	300	-
Cl- 6.3, Annex N (iii)(β-HCH)	-	300	-
Cl- 6.3, Annex N (iii)(δ - HCH)	-	300	-
Cl- 6.3, Annex N (iv)(Endosulfan - α)	-	300	-
Cl- 6.3, Annex N (iv)(Endosulfan - β)	-	300	-
Cl- 6.3, Annex N (iv)(Endosulfan - sulphate)	-	300	-
Cl- 6.3, Annex N (v)(Monocrotophos)	-	300	-
Cl- 6.3, Annex N (vi)(Ethion)	-	300	-
Cl- 6.3, Annex N (vii)(Chlorpyrifos)	-	300	-
Cl- 6.3, Annex N (viii)(Phorate and its oxygen analogue)	-	300	-
Cl- 6.3, Annex N (viii)(phorate sulphoxide)	-	300	-
Cl- 6.3, Annex N (viii)(phorate sulphone)	-	300	-
Cl- 6.3, Annex N (ix)(2,4-D)	-	300	-
Cl- 6.3, Annex N (x)(Butachlor)	-	300	-
Cl- 6.3, Annex N (xi)(Isoproturon)	-	300	-
Cl- 6.3, Annex N (xii)(Alachlor)	-	300	-
Cl- 6.3, Annex N (xiii)(Atrazine)	-	300	-
Cl- 6.3, Annex N (xiv)(Methyl parathion)	-	300	-
Cl- 6.3, Annex N (xiv)(Methyl paraoxon)	-	300	-
Cl- 6.3, Annex N (xv)(Malathion)	-	300	-
Cl- 6.3, Annex N (xv)(malaoxon)	-	300	-
Cl- 6.3, Annex N (xvi)(Aldrin)	-	300	-
6.2/Table 4/i(Alpha emitters, Bq/l, Max)	-	300	-
6.2/Table 4/ii(Beta emitters, Bq/l, Max)	-	300	-
Cl-6.3, Annex N (XVI)(Dieldrin)	-	300	-
6.1.1(Escherichia coli)	-	150	-
6.1.2(Coliform)	-	150	-
6.1.3(Faecal Streptococci)	-	150	-
6.1.4(Sulphite Reducing Anaerobe)	-	150	-
6.1.5(Pseudomonas aeruginosa)	-	150	-
6.1.6(Yeast and moould)	-	150	-
6.1.7(Salmonella)	-	150	-
6.1.8(Vibrio Cholera)	-	150	-
6.2/Table 1/i(Colour)	-	50	-
6.2/Table 1/ii(Odour)	-	50	-
6.2/Table 1/iii(Taste)	-	50	-
6.2/Table 1/iv(Turbidity)	-	150	-
6.2/Table 1/v(Total Dissoved)	-	150	-
6.2/Table 1/vi(pH Value)	-	50	-
6.2/Table 2/i(Nitrate)	-	200	-
6.2/Table 2/ii(Nitrite)	-	200	-
6.2/Table 2/iii(Sulphide)	-	150	-
6.2/Table 2/iv(Manganese)	-	150	-
6.2/Table 2/v(Copper)	-	150	-
6.2/Table 2/vi(Fluoride)	-	150	-
6.2/Table 2/vii(Barium)	-	150	-
6.2/Table 2/viii(Antimony)	-	150	-
6.2/Table 2/ix(Borate)	-	150	-
6.2/Table 2/x(Silver)	-	150	-
6.2/Table 2/xi(Chloride)	-	150	-
6.2/Table 2/xii(Sulphate)	-	150	-
6.2/Table 2/xiii(Magnesium)	-	150	-
6.2/Table 2/xiv(Calcium)	-	150	-
Cl-6.1.7(Shigella)	-	150	-
Cl-6.1.3(Staphylococcus aureus)	-	150	-
Cl-6.1.8(V. parahaemolyticus)	-	150	-
6.2/Table 2/xv(Sodium)	-	150	-
6.2/Table 2/xvi(Alkalinity)	-	150	-
6.2/Table 2/xvii(Selenium)	-	150	-
6.2/Table 2/xviii(Mineral Oil)	-	200	-
6.2/Table 2/xix(Phenolic Compounds)	-	200	-
6.2/Table 2/xx(Anionic Surface active agents)	-	200	-
6.2/Table 3/i(Arsenic)	-	150	-
6.2/Table 3/ii(Cadmium)	-	150	-
6.2/Table 3/iii(Cyanide)	-	250	-
6.2/Table 3/iv(Chromium)	-	150	-
6.2/Table 3/v(Mercury)	-	150	-
6.2/Table 3/vi(Lead)	-	150	-
6.2/Table 3/vii(Nickel)	-	150	-
6.2/Table 3/viii(Polychlorinated biphenyle (PCB))	-	300	-
6.2/Table 3/ix(Polynuclear aromatic hydrocarbons)	-	300	-
6.2/Table 3/x(Uranium)	-	300	-
Cl- 6.3, Annex N (i)(P,P -DDE)	-	300	-
Cl- 6.3, Annex N (i)(O,P -DDE)	-	300	-
Cl- 6.3, Annex N (i)(P,P- DDT)	-	300	-
Cl- 6.3, Annex N (i)(O,P -DDT)	-	300	-
Cl-6.3, Annex N (i)(P,P- DDD)	-	300	-
Cl-6.3, Annex N (i)(O,P-DDD)	-	300	-
Cl- 6.3, Annex N (ii)(γ-HCH (lindane))	-	300	-
Cl- 6.3, Annex N (iii)(α-HCH)	-	300	-
Cl- 6.3, Annex N (iii)(β-HCH)	-	300	-
Cl- 6.3, Annex N (iii)(δ - HCH)	-	300	-
Cl- 6.3, Annex N (iv)(Endosulfan - α)	-	300	-
Cl- 6.3, Annex N (iv)(Endosulfan - β)	-	300	-
Cl- 6.3, Annex N (iv)(Endosulfan - sulphate)	-	300	-
Cl- 6.3, Annex N (v)(Monocrotophos)	-	300	-
Cl- 6.3, Annex N (vi)(Ethion)	-	300	-
Cl- 6.3, Annex N (vii)(Chlorpyrifos)	-	300	-
Cl- 6.3, Annex N (viii)(Phorate and its oxygen analogue)	-	300	-
Cl- 6.3, Annex N (viii)(phorate sulphoxide)	-	300	-
Cl- 6.3, Annex N (viii)(phorate sulphone)	-	300	-
Cl- 6.3, Annex N (ix)(2,4-D)	-	300	-
Cl- 6.3, Annex N (x)(Butachlor)	-	300	-
Cl- 6.3, Annex N (xi)(Isoproturon)	-	300	-
Cl- 6.3, Annex N (xii)(Alachlor)	-	300	-
Cl- 6.3, Annex N (xiii)(Atrazine)	-	300	-
Cl- 6.3, Annex N (xiv)(Methyl parathion)	-	300	-
Cl- 6.3, Annex N (xiv)(Methyl paraoxon)	-	300	-
Cl- 6.3, Annex N (xv)(Malathion)	-	300	-
Cl- 6.3, Annex N (xv)(malaoxon)	-	300	-
Cl- 6.3, Annex N (xvi)(Aldrin)	-	300	-
6.2/Table 4/i(Alpha emitters, Bq/l, Max)	-	0	NA
6.2/Table 4/ii(Beta emitters, Bq/l, Max)	-	0	NA
Cl-6.3, Annex N (XVI)(Dieldrin)	-	300	-

14 Jan, 2027

-
Included w.e.f.12.03.2025 Exclusion Cl 6.2/Table 4/i(Alpha emiitters, Bq/L, max Cl 6.2/Table 4/ii(Beta emiitters, Bq/L, max"

7998

AJEO TESTING LABS PVT LTD, GHAZIABAD

8178606

IS 3614 (2021)

Specification of Fire Doors and Assembly First Revision of IS 3614 Parts 1 2

FIRE DOOR

315000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Integrity, Insulation)	-	120000	120000 PER HOUR FIRE RATING CHARGES
Cl 7.2.2(SIZE (width))	-	800	-
Cl 7.2.2(SIZE (Height))	-	800	-
Cl 7.3.2(SIZE (width))	-	800	-
Cl 7.3.2(SIZE (Height))	-	800	-
Cl 7.4.2(SIZE (width))	-	800	-
Cl 7.4.2(SIZE (Height))	-	800	-
Cl 7.5.2(SIZE (width))	-	800	-
Cl 7.5.2(SIZE (Height))	-	800	-
7.2.7(Vision Pane (Uninsulated door) Width)	-	800	-
7.2.7(Vision Pane (Uninsulated door) Height)	-	800	-
7.2.7(Vision Pane (Insulated door) Width)	-	800	-
7.2.7(Vision Pane (Insulated door) Height)	-	800	-
7.3.4(Vision Pane (Width))	-	800	-
7.3.4(Vision Pane (Height))	-	800	-
Cl-7.2.1(Material)	-	1200	-
Cl-7.2.4(Fire Door Frames)	-	800	-
Cl-7.2.5(Door Leaf)	-	800	-
Cl-7.2.9(Builder’s Hardware)	-	1000	-
Cl-7.4.3(Construction)	-	800	-
Cl-7.5.1(Material)	-	800	-
Cl-7.5.3(Construction of Sliding Door Leaf)	-	800	-
Cl-6(VISION PANE ON FIRE DOORS)	-	800	-
Cl-7.2.3(Construction)	-	800	-
Cl-7.2.6(Intumescent Seal)	-	800	-
Cl-7.4.4(General Requirement of Fire Rated Rolling Shutter)	-	800	-
Cl-7.6(General Requirement of Fire Doors)	-	800	-
Cl-7.3.3(Construction)	-	800	-
7.3.1(MOISTURE CONTENT)	-	800	-
Cl-7.2.8(Louvres)	-	800	-
Cl-7.3.6(Builder’s Hardware)	-	1000	-
Cl-11.3.1(Walls)	-	800	-
Cl-11.4.3(Hardware)	-	1000	-

-
-

7999

Intertek India Private Limited, New Delhi (E-20)

8122426

IS 2082 (2018)

Stationary storage type electric water heaters - Specification (Fifth Revision)

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	500	-
(Cl.15 of IS 2082:2018)(Verification of the Rated Capacity)	-	2000	-
(Cl.16 of IS 2082:2018)(Standing Loss per 24 Hours)	-	12000	-
(Cl.17 of IS 2082:2018)(Hot Water Output)	-	2000	-
(Cl.18 of IS 2082:2018)( Reheating Time)	-	2000	-
(Cl.19 of IS 2082:2018)(Mixing Factor)	-	1000	-
(Cl.20 of IS 2082:2018)(Deviation of Dial Calibration)	-	1000	-
(Cl.21 of IS 2082:2018)(Cyclic Temperature Variation)	-	1000	-
(Cl.22 of IS 2082:2018)(Finish)	-	500	-
Cl.22 of IS 2082:2018(Finish)	-	0	Repeated clause
Cl.21 of IS 2082:2018(Cyclic Temperature Variation)	-	0	Repeated clause
Cl.20 of IS 2082:2018(Deviation of Dial Calibration)	-	0	Repeated clause
Cl.19 of IS 2082:2018(Mixing Factor)	-	0	Repeated clause
Cl.18 of IS 2082:2018( Reheating Time)	-	0	Repeated clause
Cl.17 of IS 2082:2018(Hot Water Output)	-	0	Repeated clause
Cl.16 of IS 2082:2018(Standing Loss per 24 Hours)	-	0	Repeated clause
Cl.15 of IS 2082:2018(Verification of the Rated Capacity)	-	0	Repeated clause
Cl.31 of IS 302-2-21:2018(Resistance to Rusting)	-	0	Refer charges of IS 2082 : 2018
Cl.30.2 of IS 302-1:2008(Resistance to Heat & Fire : Glow wire test )	-	0	Refer charges of IS 2082 : 2018
Cl.30.1 of IS 302-1:2008(Resistance to Heat & Fire : Ball pressure test )	-	0	Refer charges of IS 2082 : 2018
Cl.29.2 of IS 302-1:2008(Clearances, Creepage Distances and Solid Insulation : Creepage distance )	-	0	Refer charges of IS 2082 : 2018
Cl.29.1 of IS 302-1:2008(Clearances, Creepage Distances and Solid Insulation : Clearance distance )	-	0	Refer charges of IS 2082 : 2018
Cl.28 of IS 302-2-21:2018(Screws & Connections)	-	0	Refer charges of IS 2082 : 2018
Cl.27.5 of IS 302-1:2008(Provision for Earthing : ECR )	-	0	Refer charges of IS 2082 : 2018
Cl.27 of IS 302-2-21:2018(Provision for Earthing)	-	0	Refer charges of IS 2082 : 2018
Cl.26 of IS 302-2-21: 2018(Terminals for External Conductors)	-	0	Refer charges of IS 2082 : 2018
Cl.25.18 of IS 302-1:2008(Supply Connection & External Flexible Cords)	-	0	Refer charges of IS 2082 : 2018
Cl.25.15 of IS 302-1:2008(Supply Connection & External Flexible Cords : Cord grip test - displacement )	-	0	Refer charges of IS 2082 : 2018
Cl.25.15 of IS 302-1:2008(Supply Connection & External Flexible Cords : Cord grip test )	-	0	Refer charges of IS 2082 : 2018
Cl.25.12 of IS 302-1:2008(Supply Connection & External Flexible Cords : Moulding of supply cord )	-	0	Refer charges of IS 2082 : 2018
Cl.25.10 of IS 302-1:2008(Supply Connection & External Flexible Cords : Colour of Earthing conductor )	-	0	Refer charges of IS 2082 : 2018
Cl.25.8 of IS 302-2-21:2018(Supply Connection & External Flexible Cords : Resistance of supply cord )	-	0	Refer charges of IS 2082 : 2018
Cl.25.5 of IS 302-1:2008(Supply Connection & External Flexible Cords : Type of attachment )	-	0	Refer charges of IS 2082 : 2018
Cl.25 of IS 302-2-21:2018(Supply Connection & External Flexible Cords : connection to the supply mains)	-	0	Refer charges of IS 2082 : 2018
Cl.24.102 of IS 302-221:2018(Component : Operation of thermal cut-out )	-	0	Refer charges of IS 2082 : 2018
Cl.24.101 of IS302-221:2018(Component : Location of non self reseting thermal cut out )	-	0	Refer charges of IS 2082 : 2018
Cl.24of IS 302-221:2018(Component : Relevent Indian standards )	-	0	Refer charges of IS 2082 : 2018
Cl. 23 of IS 302-1:2008(Internal Wiring : color identification for earthing conductor )	-	0	Refer charges of IS 2082 : 2018
Cl. 23 of IS 302-1:2008(Internal Wiring )	-	0	Refer charges of IS 2082 : 2018
Cl.22.111 of IS 302-2-21:2018(Construction : Resistance to vacuum )	-	0	Refer charges of IS 2082 : 2018
Cl.22.110 of IS 302-2-21:2018(Construction : meterial of connections )	-	0	Refer charges of IS 2082 : 2018
Cl.22.110 of IS 302-2-21:2018(Construction : Material of Inner conatiner )	-	0	Refer charges of IS 2082 : 2018
Cl.22.109 of IS 302-2-21:2018(Construction : Drain for appliance having a capacity of more than 15 liter)	-	0	Refer charges of IS 2082 : 2018
Cl.22.108 of IS 302-2-21:2018(Construction : fixing to wall )	-	0	Refer charges of IS 2082 : 2018
Cl.22.107 of IS 302-2-21:2018(Construction : Position of Heating elements and thermal control sensor)	-	0	Refer charges of IS 2082 : 2018
Cl.22.106 of IS 302-2-21:2018(Construction : Operation of thermal cut- out )	-	0	Refer charges of IS 2082 : 2018
Cl.22.104 of IS 302-2-21:2018(Construction : Outlet of open outlet heater )	-	0	Refer charges of IS 2082 : 2018
Cl.22.103 of IS 302-2-21:2018(Construction : Operation of Pressure relieve devices )	-	0	Refer charges of IS 2082 : 2018
Cl.22.102 of IS 302-2-21:2018(Construction : repeated drawing of water temp )	-	0	Refer charges of IS 2082 : 2018
Cl.22.101 of IS 302-2-21:2018(Construction : rated pressure of closed water heater )	-	0	Refer charges of IS 2082 : 2018
Cl.22.47 of IS 302-2-21:2018 (Construction : Water pressure test )	-	0	Refer charges of IS 2082 : 2018
Cl.22.44 of IS 302-1:2008(Construction : Shape and decoration of enclosure)	-	0	Refer charges of IS 2082 : 2018
Cl.22.34, Cl 22.35 of IS 302-1:2008(Construction : Shaft of operating Knobs )	-	0	Refer charges of IS 2082 : 2018
Cl.22.33 of IS 302-1:2008(Construction : Direct contact of liquids )	-	0	Refer charges of IS 2082 : 2018
Cl 22.26 ,Cl.22.28, Cl 22.29, Cl 22.30 , Cl 22.31, Cl 22.32 of IS 302-1:2008(Construction : Supplymentry/ double / reinforced insulation for Class II/ Class III appliance )	-	0	Refer charges of IS 2082 : 2018
Cl.22.18 Of IS 302-1:2008(Construction : Resistance to corrosion )	-	0	Refer charges of IS 2082 : 2018
Cl.22.17 of IS 302-1:2008(Construction : Spacers )	-	0	Refer charges of IS 2082 : 2018
Cl.22.14 of IS 302-1:2008(Construction : ragged or sharp edges)	-	0	Refer charges of IS 2082 : 2018
Cl.22.12 of IS 302-1:2008(Construction : Fixing of Handle, knob, grips, levers and similar parts)	-	0	Refer charges of IS 2082 : 2018
Cl.22.11 of IS 302-1:2008(Construction : Fixing of non detachable part )	-	0	Refer charges of IS 2082 : 2018
Cl.22.7 of IS 302-1:2008(Construction: adequate safeguards against the risk of excessive pressure)	-	0	Refer charges of IS 2082 : 2018
Cl.22.6 of IS 302-2-21:2018(Construction : Size of drain hole )	-	0	Refer charges of IS 2082 : 2018
Cl.22.6 of IS 302-1:2008(Construction : Effect of water on 3 insulation )	-	0	Refer charges of IS 2082 : 2018
Cl.22.2 of IS 302-1:2008(Construction : Provision to ensure all pole disconnection )	-	0	Refer charges of IS 2082 : 2018
Cl.22.1 of IS 302-1:2008(Construction : IP test )	-	0	Refer charges of IS 2082 : 2018
Cl.21.2 of IS 302-1:2008(Mechanical strength : prevent penetration by sharp implements. )	-	0	Refer charges of IS 2082 : 2018
Cl.21.1 of IS 302-1:2008(Mechanical strength : Rough handling in normal use)	-	0	Refer charges of IS 2082 : 2018
Cl.20 of IS 302-1:2008(Stability & Mechanical Hazards)	-	0	Refer charges of IS 2082 : 2018
Cl.19 of IS 302-2-21:2018(Abnormal Operation : leakage from container during test)	-	0	Refer charges of IS 2082 : 2018
Cl.19 of IS 302-2-21:2018(Abnormal Operation : High Voltage )	-	0	Refer charges of IS 2082 : 2018
Cl.19 of IS 302-2-21:2018(Abnormal Operation : Insulation of the supply cable or cord)	-	0	Refer charges of IS 2082 : 2018
Cl.19 of IS 302-2-21:2018(Abnormal Operation : Wall ceiling temp. of test corner )	-	0	Refer charges of IS 2082 : 2018
Cl.19 of IS 302-2-21:2018(Abnormal Operation : emission of flame or molten metal or poisonous or ignitable gas )	-	0	Refer charges of IS 2082 : 2018
Cl.16 of IS 302-2-21-2018(Leakage current and Electric strength (After humidity): Electric Strentgh )	-	0	Refer charges of IS 2082 : 2018
Cl.16 of IS 302-2-21-2018(Leakage current and Electric strength (After humidity): Leakage current )	-	0	Refer charges of IS 2082 : 2018
Cl.15 of IS 302-2-21-2018(Moisture Resistance)	-	0	Refer charges of IS 2082 : 2018
Cl.14 of IS 302-2-21:2018(Transient Over Voltages)	-	0	Refer charges of IS 2082 : 2018
Cl.13 of IS 302-2-21:2018(3 Strength at Operating Temperature)	-	0	Refer charges of IS 2082 : 2018
Cl.13 of IS 302-2-21:2018(Leakage Current )	-	0	Refer charges of IS 2082 : 2018
Cl.11 of 302-2-21:2018(Heating : Room Temp.)	-	0	Refer charges of IS 2082 : 2018
Cl.11 of 302-2-21:2018(Heating : Temp of Rubber or PVC insulation of internal and external wiring)	-	0	Refer charges of IS 2082 : 2018
Cl.11 of 302-2-21:2018(Heating : Temp of Walls, ceilings and floor of the test corner )	-	0	Refer charges of IS 2082 : 2018
Cl.10 of IS 302-2-21: 2018(Power Input & Current)	-	0	Refer charges of IS 2082 : 2018
Cl.8 of IS 302-2-21:2018(Protection Against Access to Live Parts)	-	0	Refer charges of IS 2082 : 2018
7.101(Marking : Indifiction of water inlet and water outlet )	-	0	Refer charges of IS 2082 : 2018
7.14(Marking : Legibility and durability)	-	0	Refer charges of IS 2082 : 2018
7.13(Marking : Official language of Instruction )	-	0	Refer charges of IS 2082 : 2018
7.11(Marking : Indication of controls )	-	0	Refer charges of IS 2082 : 2018
7.8(Marking : Terminals )	-	0	Refer charges of IS 2082 : 2018
7.6(Marking : Symbol used )	-	0	Refer charges of IS 2082 : 2018
7.1(Marking : Warning for Open- outlet )	-	0	Refer charges of IS 2082 : 2018
7.1(Marking : Statement for pressure reducing valve ( For rated pressure less than 0.6 MPa))	-	0	Refer charges of IS 2082 : 2018
7.1(Marking : Statement for a pressure-relief device)	-	0	Refer charges of IS 2082 : 2018
7.1(Marking : Rated capacity)	-	0	Refer charges of IS 2082 : 2018
7.1(Marking : Rated pressure)	-	0	Refer charges of IS 2082 : 2018
7.1(Marking : Country of manufacture)	-	0	Refer charges of IS 2082 : 2018
7.1(Marking: IP Number)	-	0	Refer charges of IS 2082 : 2018
7.1(Marking: Symbol for Class II)	-	0	Refer charges of IS 2082 : 2018
7.1(Marking: Model or type reference)	-	0	Refer charges of IS 2082 : 2018
7.1(Marking: Name, trademark or identification mark of manufacturer )	-	0	Refer charges of IS 2082 : 2018
7.1(Marking : Rated power input)	-	0	Refer charges of IS 2082 : 2018
7.1(Marking : Symbol for nature of supply )	-	0	Refer charges of IS 2082 : 2018
7.1(Marking : Rated Voltage )	-	0	Refer charges of IS 2082 : 2018
Cl.32 of IS 302-1:2008()	-	0	Refer charges of IS 2082 : 2018
4(GENERAL REQUIREMENT)	-	0	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	0	-
12(THERMOSTAT SETTING)	-	500	-
Cl-10(Mounting of the water heater)	-	500	-
Cl-11(Measurements of stored water temperature)	-	500	-
Cl-12(Thermostat setting)	-	0	Repeated clause
Cl-13(Measurement of energy consumption)	-	11500	-
Cl-14(Verification of the rated capacity)	-	0	Repeated clause
(Cl.22 of IS 302-2-21:2018)(Constructions)	-	0	Refer charges of IS 2082 : 2018
(Cl.22 of IS 302-2-21:2018)(Constructions)	-	0	Refer charges of IS 2082 : 2018
(Cl.22.108 of IS 302-2-21:2018)(Constructions)	-	0	Refer charges of IS 2082 : 2018
(Cl.22.6 of IS 302-2-21:2018)(Constructions)	-	0	Refer charges of IS 2082 : 2018
(Cl.22.47 of IS 302-2-21:2018)(Constructions)	-	0	Refer charges of IS 2082 : 2018
(Cl.22.47 of IS 302-2-21:2018)(Constructions)	-	0	Refer charges of IS 2082 : 2018
(Cl.22.47 of IS 302-2-21:2018)(Constructions)	-	0	Refer charges of IS 2082 : 2018
(Cl.22.47 of IS 302-2-21:2018)(Constructions)	-	0	Refer charges of IS 2082 : 2018
(Cl.22.47 of IS 302-2-21:2018)(Constructions)	-	0	Refer charges of IS 2082 : 2018
(Cl.22.101 of IS 302-2-21:2018)(Constructions)	-	0	Refer charges of IS 2082 : 2018
(Cl.22.105 of IS 302-2-21:2018)(Constructions)	-	0	Refer charges of IS 2082 : 2018
(Cl.22.101 of IS 302-2-21:2018)(Constructions)	-	0	Refer charges of IS 2082 : 2018
(Cl.22.103 of IS 302-2-21:2018)(Constructions)	-	0	Refer charges of IS 2082 : 2018
(Cl.22.104 of IS 302-2-21:2018)(Constructions)	-	0	Refer charges of IS 2082 : 2018
(Cl.22.104 of IS 302-2-21:2018)(Constructions)	-	0	Refer charges of IS 2082 : 2018
(Cl.22.105 of IS 302-2-21:2018)(Constructions)	-	0	Refer charges of IS 2082 : 2018
(Cl.22.109 of IS 302-2-21:2018)(Constructions)	-	0	Refer charges of IS 2082 : 2018
(Cl.24.101 of IS 302-2-21:2018)(Components)	-	0	Refer charges of IS 2082 : 2018
(Cl.25 of IS 302-2-21:2018)(Supply Connection and External Flexible cords)	-	0	Refer charges of IS 2082 : 2018
7(Marking)	-	0	Repeated clause
7(Marking)	-	0	Repeated clause
7(Marking)	-	0	Repeated clause
7(Marking)	-	0	Repeated clause
7(Marking)	-	0	Repeated clause
7(Marking)	-	0	Repeated clause
7(Marking)	-	0	Repeated clause
7(Marking)	-	0	Repeated clause
7(Marking)	-	0	Repeated clause
7(Marking)	-	0	Repeated clause
7(Marking)	-	0	Repeated clause
7(Marking)	-	0	Repeated clause
7(Marking)	-	0	Repeated clause
7(Marking)	-	0	Repeated clause
7(Marking)	-	0	Repeated clause
7(Marking)	-	0	Repeated clause
7(Marking)	-	0	Repeated clause
7(Marking)	-	0	Repeated clause
7(Marking)	-	0	Repeated clause
7(Marking)	-	0	Repeated clause
7(Marking)	-	0	Repeated clause
7(Marking)	-	0	Repeated clause
7(Marking)	-	0	Repeated clause
7(Marking)	-	0	Repeated clause
7(Marking)	-	0	Repeated clause
7(Marking)	-	0	Repeated clause
7(Marking)	-	0	Repeated clause
6(Classification )	-	0	-
6(Classification )	-	0	Repeated clause
(Cl.8 of IS 302-2-21:2011)(Protection Against Access to Live Parts)	-	0	-
(Cl.10 of IS 302-2-21: 2011)(Power Input & Current)	-	0	-
(Cl.11 of 302-2-21:2011)(Heating)	-	0	-
(Cl.11 of 302-2-21:2011)(Heating)	-	0	-
(Cl.11 of 302-2-21:2011)(Heating)	-	0	-
(Cl.13 of IS 302-2-21:2011)(Leakage Current )	-	0	-
(Cl.13 of IS 302-2-21:2011)(Electrical Strength at Operating Temperature)	-	0	-
(Cl.14ofIS302-2-21:2011)(Transient Over Voltages)	-	0	-
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	0	-
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	0	-
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	0	-
(Cl.17 of IS 302-2-21:2011)(Overload protection of transformers & associated circuits)	-	0	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	0	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	0	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	0	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	0	-
(Cl.20 of IS 302-2-21:2011)(Stability & Mechanical Hazards)	-	0	-
(Cl.21ofIS302-2-21:2011)(Mechanical strength)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	0	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	0	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	0	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	0	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	0	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	0	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	0	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	0	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	0	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	0	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	0	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	0	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	0	-
(Cl.24ofIS302-221:2011)(Component)	-	0	-
(Cl.24ofIS302-221:2011)(Component)	-	0	-
(Cl.24ofIS302-221:2011)(Component)	-	0	-
(Cl.24ofIS302-221:2011)(Component)	-	0	-
(Cl.24ofIS302-221:2011)(Component)	-	0	-
(Cl.24ofIS302-221:2011)(Component)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	0	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	0	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	0	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	0	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	0	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	0	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	0	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	0	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	0	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	0	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	0	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	0	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	0	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	0	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	0	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	0	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	0	-
(Cl.28 of IS 302-2-21:2011)(Screws & Connections)	-	0	-
(Cl.29ofIS302-2-21:2011)(Clearances, Creepage Distances and Solid Insulation)	-	0	-
(Cl.30 of IS 302-2-21:2011)(Resistance to Heat & Fire)	-	0	-
(Cl.30 of IS 302-2-21:2011)(Resistance to Heat & Fire)	-	0	-
(Cl.31 of IS 302-2-21:2011)(Resistance to Rusting)	-	0	-

27 Oct, 2028

-
Included.w.e.f.15.01.2025 Exclusion Cl.32 of IS 302-1:2008, Radiation, Toxicity and similar hazards Cl. 22.32 (Oxygen bomb test), Cl.22.16 (Automatic cord reel), Cl. 22.46 (Software evaluation) Cl 19.11.4.1 (Electrostatic discharges), 19.11.4.2 (Radiated fields),19.11.4.3 (Fast transient bursts), 19.11.4.4 (Surge immunity test), 19.11.4.5 (Immunity to conducted discharges), 19.11.4.6 (Class 3 Voltage dips and interruptions), 19.11.4.7 (Harmonics)

8000

QUALITY INTERNATIONAL RESEARCH & LABORATORIES PRIVATE LIMITED

5197006

IS 1161 (2014)

Steel tubes for structural purposes - Specification (Fifth Revision)

YST 210 / YST 240 / YST 310 / YST 355 / YST 420 / YST 460

11000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 6(Outer Diameter, Thickness & Mass)	-	500	Complete Testing Charge
Cl 7(Workmanship)	-	500	Complete Testing Charge
Cl 8(Workmanship)	-	500	Complete Testing Charge
Cl 9(Workmanship)	-	500	Complete Testing Charge
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	1000	Complete Testing Charge
Cl 13(Workmanship)	-	500	Complete Testing Charge
Cl 6(Outer Diameter, Thickness & Mass)	-	500	Complete Testing Charge
Cl 7(Workmanship)	-	500	Complete Testing Charge
Cl 8(Workmanship)	-	500	Complete Testing Charge
Cl 9(Workmanship)	-	500	Complete Testing Charge
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	1000	Complete Testing Charge
Cl 13(Workmanship)	-	500	Complete Testing Charge
Cl 6(Outer Diameter, Thickness & Mass)	-	500	Complete Testing Charge
Cl 7(Workmanship)	-	500	Complete Testing Charge
Cl 8(Workmanship)	-	500	Complete Testing Charge
Cl 9(Workmanship)	-	500	Complete Testing Charge
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	1000	Complete Testing Charge
Cl 13(Workmanship)	-	500	Complete Testing Charge
8 AND AS PER IS 4736(UNIFORMITY OF ZINC COATING)	-	500	Complete Testing Charge
8 AND AS PER IS 4736(MASS OF ZINC COATING)	-	500	Complete Testing Charge
5 AND AS PER IS 10748(COPPER)	-	500	Complete Testing Charge
5 AND AS PER IS 10748(MICRO ALLOY)	-	500	Complete Testing Charge
5 AND AS PER IS 10748(CARBON EQUIVALENT)	-	500	Complete Testing Charge
5 AND AS PER IS 10748(CARBON)	-	500	Complete Testing Charge
Clause - 5.1, Table-3( ALUMINIUM)	-	500	Complete Testing Charge
Clause - 5.1, Table-3(SILICON)	-	500	Complete Testing Charge
Clause - 5.1, Table-3(NITROGEN)	-	500	Complete Testing Charge
Clause - 5.1, Table-3(MANGANESE)	-	500	Complete Testing Charge
Clause - 5.1, Table-3(PHOSPHURS)	-	500	Complete Testing Charge
Clause - 5.1, Table-3(SULPHUR)	-	500	Complete Testing Charge
Clause - 5.1, Table-3( CARBON)	-	500	Complete Testing Charge
9(Straightness)	-	500	Complete Testing Charge
10(Lengths)	-	500	Complete Testing Charge
Cl 11.3.1(Flattening test (over 50 mm NB))	-	1000	Complete Testing Charge
Cl. 11.2 Table 2(Elongation)	-	1000	Complete Testing Charge
Cl. 11.2 Table 2(Yield strength)	-	1000	Complete Testing Charge
Cl. 6 , 6.2 Table 1(Square of radius of gyyration)	-	500	Complete Testing Charge
Cl. 6 , 6.2 Table 1(Radius of gyration)	-	500	Complete Testing Charge
Cl. 6 , 6.2 Table 1(Modulus of section)	-	500	Complete Testing Charge
Cl. 6 , 6.2 Table 1(Moment of inertia)	-	500	Complete Testing Charge
Cl. 6 , 6.2 Table 1(Surface internal)	-	500	Complete Testing Charge
Cl. 6 , 6.2 Table 1(Surface external)	-	500	Complete Testing Charge
Cl. 6 , 6.2 Table 1(Internal volume)	-	500	Complete Testing Charge
Cl. 6 , 6.2 Table 1(Area of cross section)	-	500	Complete Testing Charge
Cl. 6 , 6.2 Table 1(Weight)	-	500	Complete Testing Charge
Cl. 6 , 6.2 Table 1(Thickness)	-	500	Complete Testing Charge
Clause 11.2, Table -2(Elongation)	-	1000	Complete Testing Charge
Clause 11.2, Table -2(Yield Strength)	-	1000	Complete Testing Charge
Cl 13(Workmanship)	-	500	Complete Testing Charge
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	1000	Complete Testing Charge
Cl 9(Workmanship)	-	500	Complete Testing Charge
Cl 8(Workmanship)	-	500	Complete Testing Charge
Cl 7(Workmanship)	-	500	Complete Testing Charge
Cl 6(Outer Diameter, Thickness & Mass)	-	500	Complete Testing Charge
Cl 6(Outer Diameter, Thickness & Mass)	-	500	Complete Testing Charge
Cl 7(Workmanship)	-	500	Complete Testing Charge
Cl 8(Workmanship)	-	500	Complete Testing Charge
Cl 9(Workmanship)	-	500	Complete Testing Charge
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	1000	Complete Testing Charge
Cl 13(Workmanship)	-	500	Complete Testing Charge
3.1 & 6.1, 6.1.1 & 6.1.3 , Table 1(Outer Diameter - SOP MT-23)	-	500	Complete Testing Charge
3.1 & 6.1, 6.1.1 & 6.1.3 , Table 1(Thickness - SOP MT-23)	-	500	Complete Testing Charge
3.1 & 6.1, 6.1.1 & 6.1.3 , Table 1(Mass - SOP MT-23)	-	500	Complete Testing Charge
3.1 & 6.1, 6.1.1 & 6.1.3 , Table 1(Area of Cross Section - SOP MT-23)	-	500	Complete Testing Charge
8.0(Mass of Zinc coating - IS:6745)	-	500	Complete Testing Charge
8.0(Freedom from defects - IS 4736)	-	500	Complete Testing Charge
8.0(Uniformity of galvanized coating - IS 4736)	-	1000	Complete Testing Charge
8.0(Adhesion test-Pivoted Hammer Test - IS 4736)	-	500	Complete Testing Charge
13.0(Oiling and Painting - Visual)	-	500	Complete Testing Charge
12(Marking)	-	500	Complete Testing Charge
Cl 11.3.1(Cold bend test (upto & including 50 mm NB))	-	1000	Complete Testing Charge
CL 6("1.Outer dia (04) 2.Thickness (08)")	-	500	-
CL 06(Minimum Outer dia (04))	-	500	-
CL 06(Maximum Outer dia (04))	-	500	-
CL 06(" Minimum Thickness (08)")	-	500	-
CL 06(Maximum Thickness (08))	-	500	-

-
-

8001

Central Power Research Institute (CPRI), Bangalore

6101024

IS/IEC 60947 : Part 4 : Sec 1 (2018)

Low-Voltage switchgear and controlgear : Part 4-1 Contactors and motor starters electromechanical contactors and motor-Starters

434170 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1.2(Materials)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
8.1.2.1(General materials requirements)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
8.1.2.2(Glow wire testing)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
8.1.2.3(Test based on flammability category)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
8.1.3(Current-carrying parts and their connections)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
8.1.4(Clearances and creepage distances)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
8.1.5.1(Insulation)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
8.1.5.2(Direction of movement)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
8.1.5.3(Mounting)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
8.1.5.4(Protection)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
8.1.8(Terminals)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
8.1.8.1(General)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
8.1.8.2(Terminal identification and marking)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
8.1.9(Additional requirements for equipment provided with a neutral pole)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
8.1.10(Provisions for protective earthing)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
8.1.11(Enclosures for equipment)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
8.1.11.1(Design)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
8.1.11.2(Insulation)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
8.1.12(Degrees of protection of enclosed equipment)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
8.1.13(Conduit pull-out, torque and bending with metallic conduits)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
8.1.14(Limited energy source)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
8.1.14.1(General)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
8.1.14.2(Limited energy source with galvanic separation)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
8.1.14.3(Limited energy source with current limiting impedance)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
8.1.15(Stored charge energy circuit)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
8.1.16(Fault and abnormal conditions)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
8.1.17(Short-circuit and overload protection of ports)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
8.2(Performance requirements)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
8.2.1(Operating conditions)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
8.2.1.1.1(General conditions)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
8.2.1.2(Limits of operation of contactors and power-operated starters)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
8.2.1.3(Limits of operation of under-voltage relays and releases)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
8.2.1.4(Limits of operation of shunt-coil operated releases (shunt trip))	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
8.2.1.5(Limits of operation of current sensing relays and releases)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
8.2.1.5.1(Limits of operation of time-delay overload relays when all poles are energized)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
8.2.1.5.1.1(General tripping requirements of overload relays)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
8.2.1.5.1.2(Thermal memory test verification)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
8.2.1.5.2(Limits of operation of three-pole time-delay overload relays energized on two poles)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
8.2.1.5.3(Limits of operation of instantaneous magnetic overload relays)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
8.2.1.5.4(Limits of operation of under-current relays and releases for automatic change over)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
8.2.1.5.4.1(Limits of operation of under-current relays)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
8.2.1.5.4.2(Limits of operation of automatic change over by under-current relays)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
8.2.2(Temperature-rise)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
8.2.2.3(Accessible parts)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
8.2.2.4(Ambient air temperature)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
8.2.2.5(Main circuit)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
8.2.2.6(Control circuits)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
8.2.2.7.1(Uninterrupted and eight-hour duty windings)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
8.2.3(Dielectric properties)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
8.2.3.2(Voltage limiting components between circuits)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
8.2.4.3.1(Mechanical durability)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
8.2.4.3.2(Electrical durability)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
8.2.4.4(Overload current withstand capability of contactors)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
8.2.4.5(Coil power consumption)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
8.2.4.6(Pole impedance)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
8.2.4.7(Ability of a MPSD to make and break under short-circuit conditions)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
8.2.5.1(Performance under short-circuit conditions)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
8.2.5.3(Co-ordination test between AC-3e rated starter and associated SCPD)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
8.2.5.4(Co-ordination between a MPSD and another short-circuit protective device)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
8.3(Electromagnetic compatibility (EMC))	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
8.3.2(Immunity)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
8.3.3(Emission)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
9.1.5.2(Environment tests)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
9.2.2(Electrical performance of screwless-type clamping units)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
9.2.3(Ageing test for screwless-type clamping unit)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
9.2.4(Limited energy source test)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
9.2.5(Breakdown of components)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
9.2.5.2(Breakdown of components test)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
9.3.3.2(Operating limits)	-	59690	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
9.3.3.2.1.2(Coil power consumption)	-	59690	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
9.3.3.2.1.3(Pole impedance)	-	59690	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
9.3.3.2.2(Relays and releases)	-	59690	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
9.3.3.3.1(Ambient air temperature)	-	10070	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
9.3.3.3.2(Measurement of the temperature of parts)	-	10070	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
9.3.3.3.3(Temperature-rise of a part)	-	10070	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
9.3.3.3.4(Temperature-rise of the main circuit)	-	10070	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
9.3.3.3.5(Temperature-rise of control circuits)	-	10070	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
9.3.3.3.6(Temperature-rise of coils and electromagnets)	-	10070	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
9.3.3.3.7(Temperature-rise of auxiliary circuits)	-	10070	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
9.3.3.3.8(Temperature-rise of starting resistors for rheostatic rotor starters)	-	10070	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
9.3.3.6(Operational performance capability)	-	25370	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
9.3.4.2.2(prospective current)	-	82950	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
9.3.4.2.3(Test at the rated conditional short-circuit current Iq)	-	82950	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
9.3.5(Overload current withstand capability of contactors)	-	82950	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
9.3.6.2(Operation and operating limits)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
9.3.6.3(Dielectric tests)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
9.3.6.4(Mechanical operation tests of a MPSD)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
9.4.2(Immunity)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
9.4.2.2(Electrostatic discharge)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
9.4.2.3(Radiated radio-frequency electromagnetic field)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
9.4.2.4(Conducted disturbances induced by radio-frequency fields)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
9.4.2.5(Electrical fast transient/bursts)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
9.4.2.6(Surges)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
9.4.2.7(Power frequency magnetic field)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
9.4.2.8(Voltage dips and short-time interruptions)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
9.4.2.9(Harmonics in the supply)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
9.4.3(Emission)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
F.7.2(Tests on products in a new condition)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
F.7.3(Test after conventional operational performance)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
H.3(Limits of operation of control functions)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
H.4(Test of the control functions)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
M.8.3(Electromagnetic compatibility (EMC))	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
M.9.4(Thermal cycling test)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
M.9.5(Climatic test)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
M.9.7(Critical load current test)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
8.2.4 of IEC 60947-1:2007 (Sequence 5)(Verification of Mechanical properties of terminals)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
Annex C of IEC 60947-1:2007 (Sequence 5)(Verification of Degree of protection of enclosed contactors and starters)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
M.9.11(Clearance and creepage distances)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
N.3.2(Touch current measurement)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
P.2.3(Verification of operational performance capability)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
P.2.4.2(Test voltage)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
P.2.4.3(Application of the test voltage)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
P.4(Test of MPSD for IT system)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)
Q.5.3(Selectivity determined by test)	-	0	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice (Rate quoted is excluding GST)

31 Dec, 2026

-
-

8002

DELHI TEST HOUSE (A Unit of Delhii Test House Global LLP) (65) KUNDLI-2 SONIPAT

9138006

IS 17018 : Part 1 (2022)

Solar Photovoltaic Water Pumping Systems Part 1 Centrifugal Pumps Specification

55000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.1(Observation)	-	100	-
4.2.2(Observation)	-	100	-
4.2.3(Provision for remote monitoring)	-	100	-
4.3.1(STC Power (Wp))	-	100	-
4.3.2(Observation)	-	100	-
4.3.3(Observation)	-	100	-
4.3.4(Observation)	-	100	-
4.3.5(Observation)	-	100	-
4.3.6(Salt mist corrosion test)	-	100	VERIFICATION ONLY
4.3.7(Observation)	-	100	-
4.3.8(STC Power (Wp))	-	100	-
4.3.9(STC Power (Wp))	-	100	-
4.3.10(Solar Photo Voltaic (SPV) Array)	-	100	-
4.4.1(Motor- Pump set)	-	100	-
4.4.2(Observation)	-	100	-
4.4.3(Motor- Pump set Material)	-	100	-
4.5.1(Observation)	-	100	-
4.5.2(Observation)	-	100	-
4.5.3(Observation)	-	100	-
4.5.1(Module Mounting Structures and Tracking system)	-	100	-
4.5.4(Design of MMS)	-	100	-
4.6.1(SPV Pump Controller)	-	100	-
4.6.2(Observation)	-	100	-
4.6.3(Observation)	-	100	-
4.6.4(Observation)	-	100	-
6.2(Performance (with Sun simulator))	-	100	-
4.6.5(Observation)	-	100	-
4.7.1(Earthling arrangement)	-	100	-
4.7.4(Observation)	-	100	-
6.1(Observation)	-	8000	-
7.1(Litre/Wp, LPD, Head)	-	15000	-
7.2(Observation)	-	3700	-
7.2(Observation)	-	3700	-
8.1.1(Observation)	-	100	-
8.1.2(Observation)	-	100	-
9(Observation)	-	100	-
5(Litre, Litre/Wp)	-	25000	-
6(TESTS FOR HYDRAULIC AND ELECTRICAL PERFORMANCE OF PUMPSET)	-	100	-
4.2.1(Observation)	-	100	-
4.2.2(Observation)	-	100	-
4.2.3(Provision for remote monitoring)	-	100	-
4.3.1(STC Power (Wp))	-	100	-
4.3.2(Observation)	-	100	-
4.3.3(Observation)	-	100	-
4.3.4(Observation)	-	100	-
4.3.5(Observation)	-	100	-
4.3.6(Salt mist corrosion test)	-	100	VERIFICATION ONLY
4.3.7(Observation)	-	100	-
4.3.8(STC Power (Wp))	-	100	-
4.3.9(STC Power (Wp))	-	100	-
4.3.10(Solar Photo Voltaic (SPV) Array)	-	100	-
4.4.1(Motor- Pump set)	-	100	-
4.4.2(Observation)	-	100	-
4.4.3(Motor- Pump set Material)	-	100	-
4.5.1(Observation)	-	100	-
4.5.2(Observation)	-	100	-
4.5.3(Observation)	-	100	-
4.5.1(Module Mounting Structures and Tracking system)	-	100	-
4.5.4(Design of MMS)	-	100	-
4.6.1(SPV Pump Controller)	-	100	-
4.6.2(Observation)	-	100	-
4.6.3(Observation)	-	100	-
4.6.4(Observation)	-	100	-
6.2(Performance (with Sun simulator))	-	100	-
4.6.5(Observation)	-	100	-
4.7.1(Earthling arrangement)	-	100	-
4.7.4(Observation)	-	100	-
6.1(Observation)	-	8000	-
7.1(Litre/Wp, LPD, Head)	-	15000	-
7.2(Observation)	-	3700	-
7.2(Observation)	-	3700	-
8.1.1(Observation)	-	100	-
8.1.2(Observation)	-	100	-
9(Observation)	-	100	-
5(Litre, Litre/Wp)	-	25000	-
6(TESTS FOR HYDRAULIC AND ELECTRICAL PERFORMANCE OF PUMPSET)	-	100	-
4.2.1(Observation)	-	-	-
4.2.2(Observation)	-	-	-
4.2.3(Provision for remote monitoring)	-	-	-
4.3.1(STC Power (Wp))	-	-	-
4.3.2(Observation)	-	-	-
4.3.3(Observation)	-	-	-
4.3.4(Observation)	-	-	-
4.3.5(Observation)	-	-	-
4.3.6(Salt mist corrosion test)	-	-	-
4.3.7(Observation)	-	-	-
4.3.8(STC Power (Wp))	-	-	-
4.3.9(STC Power (Wp))	-	-	-
4.3.10(Solar Photo Voltaic (SPV) Array)	-	-	-
4.4.1(Motor- Pump set)	-	-	-
4.4.2(Observation)	-	-	-
4.4.3(Motor- Pump set Material)	-	-	-
4.5.1(Observation)	-	-	-
4.5.2(Observation)	-	-	-
4.5.3(Observation)	-	-	-
4.5.1(Module Mounting Structures and Tracking system)	-	-	-
4.5.4(Design of MMS)	-	-	-
4.6.1(SPV Pump Controller)	-	-	-
4.6.2(Observation)	-	-	-
4.6.3(Observation)	-	-	-
4.6.4(Observation)	-	-	-
6.2(Performance (with Sun simulator))	-	-	-
4.6.5(Observation)	-	-	-
4.7.1(Earthling arrangement)	-	-	-
4.7.4(Observation)	-	-	-
6.1(Observation)	-	-	-
7.1(Litre/Wp, LPD, Head)	-	-	-
7.2(Observation)	-	-	-
7.2(Observation)	-	-	-
8.1.1(Observation)	-	-	-
8.1.2(Observation)	-	-	-
9(Observation)	-	-	-
5(Litre, Litre/Wp)	-	-	-
6(TESTS FOR HYDRAULIC AND ELECTRICAL PERFORMANCE OF PUMPSET)	-	-	-

31 Dec, 2029

-
Included.w.e.f.13.01.2025

8003

BIS, Eastern Regional Laboratory (ERL)

None

IS 13095 (2020)

Butterfly Valves for General Purposes ( First Revision )

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.0 (VALVE END CONNECTIONS)	-
6.0 ( NOMINAL SIZES )	-
7.2 (Class designations)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) - Integral Grey Cast Iron Flanges- IS 6418 (Table 2/3/6/7/10)- Flange-D)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Malleable Cast Iron Integral Flanges- IS 6418 (Table 4/8/11)- Flange-D)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Steel Plate Flanges for Welding- IS 6392 (Table 3/5/11/17/23/28)- Pipe O.D.- d1)	-
9-Annex B (BODY ENDS ( Double Flanged Body Ends/Wafer Body Ends) -Integral Steel Flanges- IS 6392 (Table 15/21/26)- Flange -D)	-
9.1.1 ( Double Flanged Body Ends)	-
9.2.2 (Wafer Body Ends)	-
10.1 -Table1 (FACE TO FACE DIMENSIONS)	-

-
Mech: Test facility not available for 13. Seating and Linings, 14. Bearings, 16. Operations and 17. Testing

8004

National Institute of secondary steel technology

9135004

IS 15834 (2020)

Stainless Steel Sliding Door Bolts ( Aldrops ) for Use With Padlocks - Specification ( First Revision )

ALL AVAILABLE

6500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5(DIMENSIONS AND TOLERANCES)	-	500	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	500	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	500	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	500	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	500	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	500	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	500	-
6(MANUFACTURE)	-	500	-
Cl 7(FINISH)	-	500	-
Cl.4(Carbon)	-	750	-
Cl.4(Sulphur)	-	750	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	500	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	500	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	500	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	500	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	500	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	500	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	500	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	500	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	500	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	500	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	500	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	500	-
Cl 5(DIMENSIONS AND TOLERANCES)	-	500	-
Cl 6(MANUFACTURE)	-	500	-
5(DIMENSIONS AND TOLERANCES)	-	500	-
5(DIMENSIONS AND TOLERANCES)	-	500	-
5(DIMENSIONS AND TOLERANCES)	-	500	-
5(DIMENSIONS AND TOLERANCES)	-	500	-
5(DIMENSIONS AND TOLERANCES)	-	500	-
5(DIMENSIONS AND TOLERANCES)	-	500	-
5(DIMENSIONS AND TOLERANCES)	-	500	-
5(DIMENSIONS AND TOLERANCES)	-	500	-
5(DIMENSIONS AND TOLERANCES)	-	500	-
5(DIMENSIONS AND TOLERANCES)	-	500	-
5(DIMENSIONS AND TOLERANCES)	-	500	-
5(DIMENSIONS AND TOLERANCES)	-	500	-
5(DIMENSIONS AND TOLERANCES)	-	500	-
5(DIMENSIONS AND TOLERANCES)	-	500	-
5(DIMENSIONS AND TOLERANCES)	-	500	-
5(DIMENSIONS AND TOLERANCES)	-	500	-
5(DIMENSIONS AND TOLERANCES)	-	500	-
5(DIMENSIONS AND TOLERANCES)	-	500	-
5(DIMENSIONS AND TOLERANCES)	-	500	-
5(DIMENSIONS AND TOLERANCES)	-	500	-
7(FINISH)	-	500	-
8(Marking)	-	500	-
8(Marking)	-	500	-
Cl.4(Phosphorus)	-	750	-
Cl.4(Manganese)	-	750	-
Cl.4(Silicon)	-	750	-
Cl.4(Nickel)	-	750	-
Cl.4(Chromium)	-	750	-
Cl.4(Copper)	-	750	-
Cl.4(Molybdenum)	-	750	-
Cl.4(Nitrogen)	-	2000	-
Cl.4(Titanium)	-	750	-
Cl.4(Niobium)	-	750	-
Sub-Clause. 10.3.1(Dimension)	-	500	-
Sub-Clause. 10.3.2(Tensile test)	-	1200	-
Sub-Clause. 10.3.3(corrosion resistance)	-	2000	-

24 Oct, 2028

-
Included w.e.f 13.02.2025

8005

Atmy Analytical Labs Private Limited (Unit-2), Greater Noida

8176106

IS 11951 (2024)

PUMPSET FOR DIRECT EVAPORATIVE AIR COOLER â SPECIFICATION (Second Revision)

ALL

47000 View breakup
-

Clause No.	Exclusion	Remark
5.1.1(Non-Submersible Pumpset)	-	-
5.1.2(Submersible Pumpset)	-	-
6.1, 7.3, 9.1, 9.4.2, Table-1(Discharge Head, m)	-	-
6.1, 7.3, 9.1, 9.4.2,Table-1(Minimum Discharge, l/min)	-	-
6.1, 7.3, 9.1, 9.4.2, Table-1(Type 1 Motor Wattage)	-	-
6.1, 7.3, 9.1, 9.4.2, Table-1(Type 2 Motor Wattage)	-	-
6.1, 7.3, 9.1, 9.4.2, Table-2(Motor Wattage)	-	-
6.1, 7.3, 9.1,9.4.2, Table-2(Minimum Discharge Head, Hd)	-	-
6.1, 7.3, 9.1, 9.4.2,Table-2(Discharge Measurement Height, h)	-	-
6.1, 7.3, 9.1, 9.4.2, Table-2(Minimum, Discharge*)	-	-
Cl-8(GENERAL REQUIREMENTS)	-	-
9.2(Tests on motor)	-	-
9.3(Water Requirement)	-	-
9.4.1(Reliability Tests)	-	-
9.4.3(Ingress protection test)	-	-
9.4.6(Dry Run Test)	-	-
9.5(Routine Test)	-	-
9.6(Type Test)	-	-
9.7(Leakage current and electric strength at operating temperature)	-	-
9.7(Moisture resistance)	-	-
9.7(Leakage current and electric strength)	-	-

08 Feb, 2027

-
-

8006

Intertek India Private Limited, New Delhi (E-26)

8136626

IS 302 : Part 2 : Sec 3 (2007)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 3 electric iron (First Revision)

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification- IS 302-1 )	-	0	-
6(Classification- IS 302-1)	-	0	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	0	Repeated sub clause.
7.1(Marking- IS 302-1)	-	0	Repeated sub clause.
7.1(Marking- IS 302-1)	-	0	Repeated sub clause.
7.1(Marking- IS 302-1)	-	0	Repeated sub clause.
7.1(Marking- IS 302-1)	-	0	Repeated sub clause.
7.1(Marking- IS 302-1)	-	0	Repeated sub clause.
7.1(Marking- IS 302-1)	-	0	Repeated sub clause.
7.1(Marking- IS 302-1)	-	0	Repeated sub clause.
7.3(Marking- IS 302-1)	-	0	Repeated sub clause.
7.4(Marking- IS 302-1)	-	0	Repeated sub clause.
7.6(Marking- IS 302-1)	-	0	Repeated sub clause.
7.7(Marking- IS 302-1)	-	0	Repeated sub clause.
7.8(Marking- IS 302-1)	-	0	Repeated sub clause.
7.11(Marking- IS 302-1)	-	0	Repeated sub clause.
7.12(Marking- IS 302-1)	-	0	Repeated sub clause.
7.13(Marking- IS 302-1)	-	0	Repeated sub clause.
7.14(Marking- IS 302-1)	-	0	Repeated sub clause.
7.15(Marking- IS 302-1)	-	0	Repeated sub clause.
7.101(Marking)	-	0	Repeated sub clause.
8( Protection Against Electric Shock, IS 302-1)	-	1000	-
10(Power Input and Current, IS 302-1)	-	3000	-
11(Heating, IS 302-1)	-	5000	-
11(Heating, IS 302-1)	-	0	Repeated sub clause.
11(Heating, IS 302-1)	-	0	Repeated sub clause.
11(Heating, IS 302-1)	-	0	Repeated sub clause.
11(Heating, IS 302-1)	-	0	Repeated sub clause.
11(Heating, IS 302-1)	-	0	Repeated sub clause.
11(Heating, IS 302-1)	-	0	Repeated sub clause.
11(Heating, IS 302-1)	-	0	Repeated sub clause.
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	2000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	2000	-
14(Transient Over Voltages, IS 302-1)	-	3000	-
15.1(Moisture Resistance, IS 302-1)	-	4000	-
15.2(Moisture Resistance, IS 302-1)	-	0	Repeated sub clause.
15.3(Moisture Resistance, IS 302-1)	-	0	Repeated sub clause.
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	2000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	2000	-
19.4(Abnormal Operation, IS 302-1)	-	5000	-
19.4(Abnormal Operation, IS 302-1)	-	0	Repeated sub clause.
19.5(Abnormal Operation, IS 302-1)	-	0	Repeated sub clause.
19.5(Abnormal Operation, IS 302-1)	-	0	Repeated sub clause.
19.7(Abnormal Operation)	-	0	Repeated sub clause.
19.9(Abnormal Operation)	-	0	Repeated sub clause.
19.1(Abnormal Operation)	-	0	Repeated sub clause.
19.101(Abnormal Operation)	-	0	Repeated sub clause.
20.1(Stability & Mechanical Hazards, IS 302-1)	-	1000	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	0	Repeated sub clause.
21.1(Mechanical Strength, IS 302-1)	-	1000	-
21.2(Mechanical Strength, IS 302-1)	-	0	Repeated sub clause.
21.101(Mechanical Strength, IS 302-2-3)	-	0	Repeated sub clause.
22(Construction, IS 302-1)	-	3000	-
22.101(Construction)	-	0	Repeated sub clause.
22.102(Construction)	-	0	Repeated sub clause.
22.103(Construction)	-	0	Repeated sub clause.
22.104(Construction)	-	0	Repeated sub clause.
22.105(Construction)	-	0	Repeated sub clause.
22.106(Construction)	-	0	Repeated sub clause.
22.107(Construction)	-	0	Repeated sub clause.
23.1(Internal Wiring, IS 302-1)	-	1000	-
23.2(Internal Wiring, IS 302-1)	-	0	Repeated sub clause.
23.3(Internal Wiring, IS 302-1)	-	0	Repeated sub clause.
23.4(Internal Wiring, IS 302-1)	-	0	Repeated sub clause.
23.5(Internal Wiring, IS 302-1)	-	0	Repeated sub clause.
23.6(Internal Wiring, IS 302-1)	-	0	Repeated sub clause.
23.7(Internal Wiring, IS 302-1)	-	0	Repeated sub clause.
23.8(Internal Wiring, IS 302-1)	-	0	Repeated sub clause.
23.9(Internal Wiring, IS 302-1)	-	0	Repeated sub clause.
23.10(Internal Wiring, IS 302-1)	-	0	Repeated sub clause.
24.1(Components, IS 302-1)	-	2000	-
24.2(Components, IS 302-1)	-	0	Repeated sub clause.
24.4(Components, IS 302-1)	-	0	Repeated sub clause.
24.5(Components, IS 302-1)	-	0	Repeated sub clause.
24.6(Components, IS 302-1)	-	0	Repeated sub clause.
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Repeated sub clause.
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Repeated sub clause.
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Repeated sub clause.
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Repeated sub clause.
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Repeated sub clause.
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Repeated sub clause.
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Repeated sub clause.
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Repeated sub clause.
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Repeated sub clause.
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Repeated sub clause.
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Repeated sub clause.
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Repeated sub clause.
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Repeated sub clause.
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Repeated sub clause.
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Repeated sub clause.
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Repeated sub clause.
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Repeated sub clause.
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	0	Repeated sub clause.
26(Terminals for External Conductors, IS 302-1)	-	0	Repeated sub clause.
27.1(Provision for Earthing, IS 302-1)	-	2000	-
27.2(Provision for Earthing, IS 302-1)	-	0	Repeated sub clause.
27.3(Provision for Earthing, IS 302-1)	-	0	Repeated sub clause.
27.4(Provision for Earthing, IS 302-1)	-	0	Repeated sub clause.
27.5(Provision for Earthing, IS 302-1)	-	0	Repeated sub clause.
28(Screws & Connections, IS 302-1)	-	1000	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	2000	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	0	Repeated sub clause.
30.1(Resistance to Heat, Fire & Tracking, IS 302-1)	-	3000	-
30.2(Resistance to Heat, Fire & Tracking, IS 302-1)	-	0	Repeated sub clause.
31(Resistance of Rusting, IS 302-1)	-	0	Repeated sub clause.
4(General requirement)	-	0	Repeated sub clause.
16(Leakage current and electric strength)	-	0	Repeated sub clause.
17(Overload protection of transformers and associated circuits)	-	2000	-
17(Overload protection of transformers and associated circuits)	-	0	Repeated sub clause.
17(Overload protection of transformers and associated circuits)	-	0	Repeated sub clause.
19.11.4.1(Electrostatic discharges)	-	0	Repeated sub clause.
5(GENERAL CONDITIONS FOR THE TESTS)	-	0	Repeated sub clause.
19(Abnormal operation)	-	0	Repeated clause.
25(Supply Connection and External Flexible Cords)	-	0	Repeated clause.
18(Endurance)	-	0	Repeated clause.

27 Apr, 2029

-
Included.w.e.f.22.01.2025 Exclusion Cl 32 (Radiation, Toxicity and similar Hazard IS 302-1) Cl 19.11.4.1 (Electrostatic discharges) Cl 19.11.4.2 (Radiated fields) Cl 19.11.4.3 ( Fast transient bursts) Cl 19.11.4.4 ( Surge immunity test) Cl 19.11.4.5 (Immunity to conducted discharges) Cl 19.11.4.6 ( Class 3 Voltage dips and interruptions) Cl 19.11.4.7 (Harmonics)

8007

Classic Testing & Research Centre (B17), Noida

8180826

IS 302 : Part 2 : Sec 2 (1997)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 2 vacuum cleaners and water suction cleaning appliances

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Rating)	-	500	20% Discount to BIS
6(Classification)	-	500	20% Discount to BIS
7(Marking)	-	1000	20% Discount to BIS
8(Protection against Access to Live Parts)	-	1500	20% Discount to BIS
9(Starting Of Motor Operated Appliances)	-	1000	20% Discount to BIS
10("Power Input & Current")	-	1000	20% Discount to BIS
11(Temperature Rise/ Heating)	-	1000	20% Discount to BIS
12(OPERATION UNDER OVERLOAD CONDITIONS OF APPLIANCES WITH HEATING ELEMENTS)	-	1000	20% Discount to BIS
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	1000	20% Discount to BIS
14(RADIO AND TELEVISION INTERFERENCE SUPPRESSION)	-	1000	20% Discount to BIS
15(MOISTURE RESISTANCE)	-	1000	20% Discount to BIS
16(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( AFTER HUMIDITY TREATMENT ))	-	1000	20% Discount to BIS
17(OVERLOAD PROTECTION)	-	1000	20% Discount to BIS
19(ABNORMAL OPERATION)	-	1000	20% Discount to BIS
20(STABILITY AND MECHANICAL HAZARDS)	-	1000	20% Discount to BIS
21(MECHANICAL STRENGTH)	-	1000	20% Discount to BIS
22(Construction)	-	1000	20% Discount to BIS
23(INTERNAL WIRING)	-	1000	20% Discount to BIS
24(COMPONENTS)	-	1000	20% Discount to BIS
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS)	-	1000	20% Discount to BIS
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	1000	20% Discount to BIS
27(PROVISION FOR EARTHING)	-	1000	20% Discount to BIS
28(SCREWS AND CONNECTIONS)	-	1000	20% Discount to BIS
29(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH INSULATION)	-	1000	20% Discount to BIS
30(RESISTANCE TO HEAT, FIRE AND TRACKING)	-	1000	20% Discount to BIS
31(RESISTANCE TO RUSTING)	-	1000	20% Discount to BIS
32(RADIATION HAZARDS)	-	1000	20% Discount to BIS
5(Rating)	-	500	20% Discount to BIS
6(Classification)	-	500	20% Discount to BIS
7(Marking)	-	500	20% Discount to BIS
8(Protection against Access to Live Parts)	-	1000	20% Discount to BIS
9(Starting Of Motor Operated Appliances)	-	1000	20% Discount to BIS
10("Power Input & Current")	-	1000	20% Discount to BIS
11(Temperature Rise/ Heating)	-	1000	20% Discount to BIS
12(OPERATION UNDER OVERLOAD CONDITIONS OF APPLIANCES WITH HEATING ELEMENTS)	-	1000	20% Discount to BIS
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	1000	20% Discount to BIS
14(RADIO AND TELEVISION INTERFERENCE SUPPRESSION)	-	1000	20% Discount to BIS
15(MOISTURE RESISTANCE)	-	1000	20% Discount to BIS
16(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( AFTER HUMIDITY TREATMENT ))	-	1000	20% Discount to BIS
17(OVERLOAD PROTECTION)	-	1000	20% Discount to BIS
19(ABNORMAL OPERATION)	-	1000	20% Discount to BIS
20(STABILITY AND MECHANICAL HAZARDS)	-	1000	20% Discount to BIS
21(MECHANICAL STRENGTH)	-	1000	20% Discount to BIS
22(Construction)	-	1000	20% Discount to BIS
23(INTERNAL WIRING)	-	1000	20% Discount to BIS
24(COMPONENTS)	-	1000	20% Discount to BIS
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS)	-	1000	20% Discount to BIS
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	1000	20% Discount to BIS
27(PROVISION FOR EARTHING)	-	1000	20% Discount to BIS
28(SCREWS AND CONNECTIONS)	-	1000	20% Discount to BIS
29(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH INSULATION)	-	1000	20% Discount to BIS
30(RESISTANCE TO HEAT, FIRE AND TRACKING)	-	1000	20% Discount to BIS
31(RESISTANCE TO RUSTING)	-	1000	20% Discount to BIS
32(RADIATION HAZARDS)	-	1000	20% Discount to BIS
19.11.4.7(Harmonics)	-	1000	20% Discount to BIS
19.11.4.6(Class 3 Voltage dips and interruptions)	-	1000	20% Discount to BIS
19.11.4.4(Surge immunity test)	-	1000	20% Discount to BIS
19.11.4.3(Fast transient bursts)	-	1000	20% Discount to BIS
19.11.4.1(Electrostatic discharges)	-	1000	20% Discount to BIS

15 Oct, 2027

-
Included.w.e.f.26.12.2024 Exclusion Cl 19.11.4.5 (Immunity to conducted discharges) Cl 19.11.4.2 (Radiated fields)

8008

DELHI TEST HOUSE, Azadhpur

8131406

IS 17803 (2022)

POTABLE WATER BOTTLES (COPPER, STAINLESS STEEL, ALUMINIUM) SPECIFICATION

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Manufacture and Workmanship)	-	500	NA
5.3(Manufacture and Workmanship)	-	500	NA
7.1(Materials)	-	6000	NA
7.1.1(copper bottle - copper)	-	500	NA
7.1.1(copper bottle – lead)	-	500	NA
7.1.1(copper bottle – bismuth)	-	500	NA
7.1.1(copper bottle – oxygen)	-	2000	NA
7.1.1(copper bottle – total impurities)	-	500	NA
7.1.3.3(o-ring or washer - Defects)	-	250	NA
7.1.4(Auxillary closure- Bisphenol A (BPA))	-	4500	NA
7.1.8(Anodic coating)	-	1000	NA
7.1.8(Hard Anodized)	-	1000	NA
7.1.9(External coating– Limit of Lead)	-	1000	NA
7.1.9(External coating– Limit of Cadmium)	-	1000	NA
7.2(Capacity)	-	500	NA
7.3, 7.3.1, 7.3.2(Impact resistance Test/ Drop Impact Test/ Pendulum Impact test)	-	1000	NA
7.4(Test for strength of shoulder strap)	-	1000	NA
7.5(Test for cord)	-	1000	NA
7.7(Leakage test)	-	1000	NA
7.8(Staining test)	-	1000	NA
7.9(Lever, device for operating or Regulating flow test)	-	1000	NA
7.11(Load test)	-	2000	NA
7.12(Food safe test/Leaching test)	-	1000	NA
7.12(Water potability)	-	1000	NA
7.13(Turbidity)	-	1000	NA
7.13(pH value)	-	500	NA
7.13(Taste threshold)	-	500	NA
7.13(Colour, Hazen units)	-	500	NA
7.13(Odour)	-	500	NA
7.13(Total dissolved solids)	-	500	NA
9.1(Marking)	-	250	NA
7.1.3(Overall Migration test (IS 9845 : 1998))	-	5500	NA
Cl. 7.1.5(PERFORMANCE TEST (Lever device ))	-	1000	NA
7.10(Stability test)	-	1000	NA
7.1.2.1(Stainless steel bottle (material))	-	5000	NA
7.1.2 Note 2(Aluminium bottle (Material))	-	5000	NA
7.1.3.1(Stopper Material)	-	5000	NA
7.1.4(Auxillary closure - Material)	-	5000	NA
15. 7.1.2 (Note 1), Annex A (Amendment 1)- Leaching of food grade stainless steel(Annex A (Amendment 1)- Leaching of food grade stainless steel)	-	7000	NA
7.1.1.1(copper bottle – Thickness)	-	250	NA
7.1.2.1(Stainless steel bottle (thickness))	-	250	NA
7.1.9(External coating - Thickness test)	-	250	NA
7.1.9(External coating - Salt water corrosion test)	-	1000	NA
7.1.9(External coating - Adhesion test)	-	1000	NA
7.3.1.3 (Amendment 1)(Drop impact test - Free fall test)	-	2500	NA
7.3.1.2 (Amendment 1)(Drop impact test - Vertical hang)	-	1000	NA
7.3.1.1 (Amendment 1)(Drop impact test - Horizontal Hang)	-	1000	NA
7.1.2 (Note 1), Annex B (Amendment 1)- Sensorial test(Annex B (Amendment 1)- Sensorial test)	-	2500	NA
7.1.3.2(o-ring or washer Overall migration)	-	5000	NA
Cl 7.6(Test for cord chain)	-	1000	NA

17 Jun, 2027

-
-

8009

Classic Testing & Research Centre (B17), Noida

8180826

IS 302 : Part 2 : Sec 203 (1994)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 203 electric call bells and buzzers for indoor use

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Rating)	-	500	20% Discount to BIS
6(Classification)	-	500	20% Discount to BIS
7(Marking)	-	500	20% Discount to BIS
8(Protection against Access to Live Parts)	-	1000	20% Discount to BIS
9(Starting Of Motor Operated Appliances)	-	500	20% Discount to BIS
10("Power Input & Current")	-	1000	20% Discount to BIS
11(Temperature Rise/ Heating)	-	1000	20% Discount to BIS
12(Operation Under Overload Conditions of Appliances with heating Element)	-	1000	20% Discount to BIS
13(Leakage Current and Electric Strength at Operating Temperature)	-	1000	20% Discount to BIS
14("Radio and Television Interference Suppression / Transient Over Voltage ")	-	1000	20% Discount to BIS
15(Moisture Resistance)	-	1000	20% Discount to BIS
16(Leakage Current and Electric Strength/ Insulation Resistance and Electric Strength (After Humidity treatment))	-	1000	20% Discount to BIS
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	1000	20% Discount to BIS
18(Endurance)	-	1000	20% Discount to BIS
19(Abnormal Operation)	-	1000	20% Discount to BIS
20(Stability & Mechanical Hazards)	-	1000	20% Discount to BIS
21(Mechanical strength)	-	1000	20% Discount to BIS
22(Construction)	-	1000	20% Discount to BIS
23(Internal Wiring)	-	1000	20% Discount to BIS
24(Components)	-	1000	20% Discount to BIS
25(Supply Connection & External Flexible Cords)	-	1000	20% Discount to BIS
26(Terminals For External Conductors)	-	1000	20% Discount to BIS
27(Provision For Earthing)	-	1000	20% Discount to BIS
28(Screws & Connections)	-	1000	20% Discount to BIS
29(Clearances, Creepage Distances & Solid Insulation)	-	1000	20% Discount to BIS
30(Resistance to Heat & Fire)	-	1000	20% Discount to BIS
31(Resistance to Rusting)	-	1000	20% Discount to BIS
32(Radiation hazards)	-	1000	20% Discount to BIS

15 Oct, 2027

-
Included.w.e.f.24.12.2024

8010

Yadav Measurements Pvt Ltd, Udaipur

8116426

IS 15884 (2024)

ALTERNATING CURRENT DIRECT CONNECTED STATIC PREPAYMENT METERS FOR ACTIVE ENERGY CLASS 1 AND 2 SPECIFICATION

Alternating current direct connected static prepayment meters for active energy , (class 1 and 2) - specification

633950 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(GENERAL REQUIREMENTS)	-	14950	-
5.2.1(Spring Hammer Test)	-	1300	-
5.2.2(Shock Test)	-	5200	-
5.2.3(Vibration Test)	-	9100	-
5.2.4(Test of Resistance to Heat and Fire)	-	3250	-
5.2.5(Tests of Protection against Penetration of Dust and Water)	-	6500	-
5.3.1(Dry Heat Test)	-	5000	-
5.3.2(Cold Test)	-	6500	-
5.3.3(Damp Heat Cyclic Test)	-	11700	-
5.4.1(Test of Power Consumption)	-	2600	-
5.4.2(Test of influence of voltage dips and interruptions)	-	2000	-
5.4.3(Test of Influence of Short-Time Overcurrent)	-	140000	-
5.4.4(Test of Influence of Self-Heating)	-	2000	-
5.4.5(Test of Influence of Heating)	-	2000	-
5.4.6.2(Impulse voltage test)	-	7500	-
5.4.6.3(a.c. voltage test)	-	1350	-
5.4.6.4(Insulation resistance test)	-	1350	-
5.5.2(Test of Immunity to Electrostatic Discharges)	-	6500	-
5.5.3(Test of Immunity to Electromagnetic HF Fields)	-	32000	-
5.5.4(Fast Transient Burst Test)	-	7800	-
5.5.5(Radio Interference Measurement)	-	28000	-
5.5.6(Surge Immunity Test)	-	12000	-
5.6.2(Test of Influence Quantities)	-	22000	-
5.6.3(Test of No-Load Condition)	-	1300	-
5.6.4(Test of Starting Condition)	-	1300	-
5.6.5(Test of Meter Constant)	-	1300	-
5.6.6(Interpretation of Test Results)	-	0	-
5.7(Test of the Load Switch operation for payment function)	-	3500	-
5.8(Test of Charging Functions)	-	7000	-
5.9(Interruption and Restoration of the Load for Emergency Credit Facility (if applicable))	-	3500	-
5.10(Tests of the Load Switch operation at Different Voltages and Temperature)	-	14000	-
6(FUNCTIONAL REQUIREMENTS)	-	33500	-
4(GENERAL REQUIREMENTS)	-	-	-
5.2.1(Spring Hammer Test)	-	-	-
5.2.2(Shock Test)	-	-	-
5.2.3(Vibration Test)	-	-	-
5.2.4(Test of Resistance to Heat and Fire)	-	-	-
5.2.5(Tests of Protection against Penetration of Dust and Water)	-	-	-
5.3.1(Dry Heat Test)	-	-	-
5.3.2(Cold Test)	-	-	-
5.3.3(Damp Heat Cyclic Test)	-	-	-
5.4.1(Test of Power Consumption)	-	-	-
5.4.2(Test of influence of voltage dips and interruptions)	-	-	-
5.4.3(Test of Influence of Short-Time Overcurrent)	-	-	-
5.4.4(Test of Influence of Self-Heating)	-	-	-
5.4.5(Test of Influence of Heating)	-	-	-
5.4.6.2(Impulse voltage test)	-	-	-
5.4.6.3(a.c. voltage test)	-	-	-
5.4.6.4(Insulation resistance test)	-	-	-
5.5.2(Test of Immunity to Electrostatic Discharges)	-	-	-
5.5.3(Test of Immunity to Electromagnetic HF Fields)	-	-	-
5.5.4(Fast Transient Burst Test)	-	-	-
5.5.5(Radio Interference Measurement)	-	-	-
5.5.6(Surge Immunity Test)	-	-	-
5.6.2(Test of Influence Quantities)	-	-	-
5.6.3(Test of No-Load Condition)	-	-	-
5.6.4(Test of Starting Condition)	-	-	-
5.6.5(Test of Meter Constant)	-	-	-
5.6.6(Interpretation of Test Results)	-	-	-
5.7(Test of the Load Switch operation for payment function)	-	-	-
5.8(Test of Charging Functions)	-	-	-
5.9(Interruption and Restoration of the Load for Emergency Credit Facility (if applicable))	-	-	-
5.10(Tests of the Load Switch operation at Different Voltages and Temperature)	-	-	-
6(FUNCTIONAL REQUIREMENTS)	-	-	-

-
-

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number