BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15475 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

7951

CENTRAL ELECTRICAL TESTING LABORATORY (CETL), KAKKALUR

6104524

IS 16103 : Part 2 (2012)

Led modules for general lighting: Part 2 performance requirements

37500 View breakup
-

Clause No.	Exclusion	Remark
7(Module Power)	-	10% discount is allowed to the repeat customers within One year.
8(Light Output)	-	10% discount is allowed to the repeat customers within One year.
9(Chromaticity Coordinates, Correlated colour temperature and colour rendering)	-	10% discount is allowed to the repeat customers within One year.
10(LED Module Life)	-	10% discount is allowed to the repeat customers within One year.
12(Information for Luminaire design)	-	10% discount is allowed to the repeat customers within One year.
6(Dimensions)	-	10% discount is allowed to the repeat customers within One year.

31 Dec, 2026

-
-

7952

Ahmedabad Textile Industry's Research Association (ATIRA), Ahmedabad

7173002

IS 16190 (2014)

Agro textiles - High density polyethylene (HDPE) laminated woven lay flat tube for irrigation purpose - Specification

105470 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6. Table 2 v) IS 14714 (Abrasion resistance : Loss in breaking strength shall not be more than 15 percent)	-	1350	-
6. Table 2 ix) a) IS 7016(Part 8) (Oven method) (Accelerated ageing test for 72 h at 70 ± 1°C: Loss in breaking strength shall not be more than 15 percent Wrap)	-	4320	-
6. Table 2 ix) b) IS 7016(Part 8) (Oven method) (Accelerated ageing test for 72 h at 70 ± 1°C: Loss in breaking strength shall not be more than 1 5 percent Weft)	-	0	-
6. Table 2 iii) IS 1969 (Part 1) ( Elongation at break)	-	0	-
6.5( Length : Unless specified otherwise, the standard length shall be 30 m. A tolerance of +5 percent shall be permitted on the length prescribed for the lay flat tube by the purchaser. No negative tolerance shall be permitted)	-	200	-
6. Table 2 vi) a) IS 14293 ( Trapezoid tear strength: Wrap)	-	900	-
6. Table 2 vi) b) IS 14293 ( Trapezoid tear strength : Weft)	-	0	-
6. Table 2 i) IS 1964 (Mass)	-	400	-
6. Table 2 vii) Annex C (Puncture strength)	-	1350	-
6. Table 2 iv) b) Annex B(Retention of breaking strength after UV exposure of 500 h : weft 85 percent of original actual value (fabric))	-	45900	-
6. Table 2 ii) b) IS 1969 (Part 1) ( Breaking strength before UV exposure : Weft)	-	900	-
6. Table 2 iv) a) Annex B(Retention of breaking strength after UV exposure of 500 h : Wrap 85 percent of original actual value (fabric))	-	0	-
6. Table 2 ii) a) IS 1969 (Part 1) ( Breaking strength before UV exposure : Wrap)	-	0	-
4,4.1 IS 6192( MATERIALS HDPE Tapes)	-	650	-
4.2 IS 6899(MATERIALS HDPE Fabric)	-	200	-
5,5.1(MANUFACTURE Lamination )	-	500	-
5,5.2(MANUFACTURE A 5 layer laminated fabric is produced using acombination of 2 layers of HDPE fabric and 3 layersof coating film. The minimum coating thickness shall be 35 µ. The layers of HDPE fabric used to manufacture lay flat tubes, shall be joined by sandwich lamination.The minimum thickness of the sandwich laminationshall be 40 µ. )	-	1150	-
6(REQUIREMENTS)	-	0	-
6.3,6.3.1(Hydrostatic Burst Pressure Test)	-	650	-
6.7 IS 1969 (Part 1)(Welded Seam Strength Before UV Exposure : When a sample of fabric with seam cut from the lay flat tube is tested for welded seam strength as per the method specified in IS 1969 (Part 1), welded seam strength before UV exposure shall be not less than the 80 percent of the original actual fabric strength)	-	900	-
6.8 Annex B and IS 1969 (Part 1)(Welded Seam Strength After UV Exposure: When a sample of fabric with seam cut from the lay flat tube is tested for welded seam strength as per the method specified in Annex B and IS 1969 (Part 1), the loss in welded seam strength after UV exposure shall be not more than 15 percent)	-	45900	-
6. Table 2 v) IS 14714 (Abrasion resistance : Loss in breaking strength shall not be more than 15 percent)	-	0	-
6. Table 2 ix) a) IS 7016(Part 8) (Oven method) (Accelerated ageing test for 72 h at 70 ± 1°C: Loss in breaking strength shall not be more than 15 percent Wrap)	-	0	-
6. Table 2 ix) b) IS 7016(Part 8) (Oven method) (Accelerated ageing test for 72 h at 70 ± 1°C: Loss in breaking strength shall not be more than 1 5 percent Weft)	-	0	-
6. Table 2 iii) IS 1969 (Part 1) ( Elongation at break)	-	0	-
6.5( Length : Unless specified otherwise, the standard length shall be 30 m. A tolerance of +5 percent shall be permitted on the length prescribed for the lay flat tube by the purchaser. No negative tolerance shall be permitted)	-	0	-
6. Table 2 vi) a) IS 14293 ( Trapezoid tear strength: Wrap)	-	0	-
6. Table 2 vi) b) IS 14293 ( Trapezoid tear strength : Weft)	-	0	-
6. Table 2 i) IS 1964 (Mass)	-	0	-
6. Table 2 vii) Annex C (Puncture strength)	-	0	-
6. Table 2 iv) b) Annex B(Retention of breaking strength after UV exposure of 500 h : weft 85 percent of original actual value (fabric))	-	0	-
6. Table 2 ii) b) IS 1969 (Part 1) ( Breaking strength before UV exposure : Weft)	-	0	-
6. Table 2 iv) a) Annex B(Retention of breaking strength after UV exposure of 500 h : Wrap 85 percent of original actual value (fabric))	-	0	-
6. Table 2 ii) a) IS 1969 (Part 1) ( Breaking strength before UV exposure : Wrap)	-	0	-
4,4.1 IS 6192( MATERIALS HDPE Tapes)	-	0	-
4.2 IS 6899(MATERIALS HDPE Fabric)	-	0	-
5,5.1(MANUFACTURE Lamination )	-	0	-
5,5.2(MANUFACTURE A 5 layer laminated fabric is produced using acombination of 2 layers of HDPE fabric and 3 layersof coating film. The minimum coating thickness shall be 35 µ. The layers of HDPE fabric used to manufacture lay flat tubes, shall be joined by sandwich lamination.The minimum thickness of the sandwich laminationshall be 40 µ. )	-	0	-
6(REQUIREMENTS)	-	0	-
6. Table 2 x) Annex E (Cold cracking resistance test at –5°C)	-	0	-
6.2(Workmanship)	-	200	-
6.3,6.3.1(Hydrostatic Burst Pressure Test)	-	0	-
6.7 IS 1969 (Part 1)(Welded Seam Strength Before UV Exposure : When a sample of fabric with seam cut from the lay flat tube is tested for welded seam strength as per the method specified in IS 1969 (Part 1), welded seam strength before UV exposure shall be not less than the 80 percent of the original actual fabric strength)	-	0	-
6.8 Annex B and IS 1969 (Part 1)(Welded Seam Strength After UV Exposure: When a sample of fabric with seam cut from the lay flat tube is tested for welded seam strength as per the method specified in Annex B and IS 1969 (Part 1), the loss in welded seam strength after UV exposure shall be not more than 15 percent)	-	0	-
6. Table 2 v) IS 14714 (Abrasion resistance : Loss in breaking strength shall not be more than 15 percent)	-	0	-
6. Table 2 ix) a) IS 7016(Part 8) (Oven method) (Accelerated ageing test for 72 h at 70 ± 1°C: Loss in breaking strength shall not be more than 15 percent Wrap)	-	0	-
6. Table 2 ix) b) IS 7016(Part 8) (Oven method) (Accelerated ageing test for 72 h at 70 ± 1°C: Loss in breaking strength shall not be more than 1 5 percent Weft)	-	0	-
6. Table 2 iii) IS 1969 (Part 1) ( Elongation at break)	-	0	-
6.5( Length : Unless specified otherwise, the standard length shall be 30 m. A tolerance of +5 percent shall be permitted on the length prescribed for the lay flat tube by the purchaser. No negative tolerance shall be permitted)	-	0	-
6. Table 2 vi) a) IS 14293 ( Trapezoid tear strength: Wrap)	-	0	-
6. Table 2 vi) b) IS 14293 ( Trapezoid tear strength : Weft)	-	0	-
6. Table 2 i) IS 1964 (Mass)	-	0	-
6. Table 2 vii) Annex C (Puncture strength)	-	0	-
6. Table 2 iv) b) Annex B(Retention of breaking strength after UV exposure of 500 h : weft 85 percent of original actual value (fabric))	-	0	-
6. Table 2 ii) b) IS 1969 (Part 1) ( Breaking strength before UV exposure : Weft)	-	0	-
6. Table 2 iv) a) Annex B(Retention of breaking strength after UV exposure of 500 h : Wrap 85 percent of original actual value (fabric))	-	0	-
6. Table 2 ii) a) IS 1969 (Part 1) ( Breaking strength before UV exposure : Wrap)	-	0	-
4,4.1 IS 6192( MATERIALS HDPE Tapes)	-	0	-
4.2 IS 6899(MATERIALS HDPE Fabric)	-	0	-
5,5.1(MANUFACTURE Lamination )	-	0	-
5,5.2(MANUFACTURE A 5 layer laminated fabric is produced using acombination of 2 layers of HDPE fabric and 3 layersof coating film. The minimum coating thickness shall be 35 µ. The layers of HDPE fabric used to manufacture lay flat tubes, shall be joined by sandwich lamination.The minimum thickness of the sandwich laminationshall be 40 µ. )	-	0	-
6(REQUIREMENTS)	-	0	-
6. Table 2 x) Annex E (Cold cracking resistance test at –5°C)	-	0	-
6.2(Workmanship)	-	0	-
6.3,6.3.1(Hydrostatic Burst Pressure Test)	-	0	-
6.7 IS 1969 (Part 1)(Welded Seam Strength Before UV Exposure : When a sample of fabric with seam cut from the lay flat tube is tested for welded seam strength as per the method specified in IS 1969 (Part 1), welded seam strength before UV exposure shall be not less than the 80 percent of the original actual fabric strength)	-	0	-
6.8 Annex B and IS 1969 (Part 1)(Welded Seam Strength After UV Exposure: When a sample of fabric with seam cut from the lay flat tube is tested for welded seam strength as per the method specified in Annex B and IS 1969 (Part 1), the loss in welded seam strength after UV exposure shall be not more than 15 percent)	-	0	-
6. Table 2 v) IS 14714 (Abrasion resistance : Loss in breaking strength shall not be more than 15 percent)	-	0	-
6. Table 2 ix) a) IS 7016(Part 8) (Oven method) (Accelerated ageing test for 72 h at 70 ± 1°C: Loss in breaking strength shall not be more than 15 percent Wrap)	-	0	-
6. Table 2 ix) b) IS 7016(Part 8) (Oven method) (Accelerated ageing test for 72 h at 70 ± 1°C: Loss in breaking strength shall not be more than 1 5 percent Weft)	-	0	-
6. Table 2 iii) IS 1969 (Part 1) ( Elongation at break)	-	0	-
6.5( Length : Unless specified otherwise, the standard length shall be 30 m. A tolerance of +5 percent shall be permitted on the length prescribed for the lay flat tube by the purchaser. No negative tolerance shall be permitted)	-	0	-
6. Table 2 vi) a) IS 14293 ( Trapezoid tear strength: Wrap)	-	0	-
6. Table 2 vi) b) IS 14293 ( Trapezoid tear strength : Weft)	-	0	-
6. Table 2 i) IS 1964 (Mass)	-	0	-
6. Table 2 vii) Annex C (Puncture strength)	-	0	-
6. Table 2 iv) b) Annex B(Retention of breaking strength after UV exposure of 500 h : weft 85 percent of original actual value (fabric))	-	0	-
6. Table 2 ii) b) IS 1969 (Part 1) ( Breaking strength before UV exposure : Weft)	-	0	-
6. Table 2 iv) a) Annex B(Retention of breaking strength after UV exposure of 500 h : Wrap 85 percent of original actual value (fabric))	-	0	-
6. Table 2 ii) a) IS 1969 (Part 1) ( Breaking strength before UV exposure : Wrap)	-	0	-
4,4.1 IS 6192( MATERIALS HDPE Tapes)	-	0	-
4.2 IS 6899(MATERIALS HDPE Fabric)	-	0	-
5,5.1(MANUFACTURE Lamination )	-	0	-
5,5.2(MANUFACTURE A 5 layer laminated fabric is produced using acombination of 2 layers of HDPE fabric and 3 layersof coating film. The minimum coating thickness shall be 35 µ. The layers of HDPE fabric used to manufacture lay flat tubes, shall be joined by sandwich lamination.The minimum thickness of the sandwich laminationshall be 40 µ. )	-	0	-
6(REQUIREMENTS)	-	0	-
6. Table 2 x) Annex E (Cold cracking resistance test at –5°C)	-	0	-
6.2(Workmanship)	-	0	-
6.3,6.3.1(Hydrostatic Burst Pressure Test)	-	0	-
6.7 IS 1969 (Part 1)(Welded Seam Strength Before UV Exposure : When a sample of fabric with seam cut from the lay flat tube is tested for welded seam strength as per the method specified in IS 1969 (Part 1), welded seam strength before UV exposure shall be not less than the 80 percent of the original actual fabric strength)	-	0	-
6.8 Annex B and IS 1969 (Part 1)(Welded Seam Strength After UV Exposure: When a sample of fabric with seam cut from the lay flat tube is tested for welded seam strength as per the method specified in Annex B and IS 1969 (Part 1), the loss in welded seam strength after UV exposure shall be not more than 15 percent)	-	0	-
6. Table 2 x) Annex E (Cold cracking resistance test at –5°C)	-	0	-
6.2(Workmanship)	-	0	-
6. Table 2 v) IS 14714 (Abrasion resistance : Loss in breaking strength shall not be more than 15 percent)	-	0	-
6. Table 2 ix) a) IS 7016(Part 8) (Oven method) (Accelerated ageing test for 72 h at 70 ± 1°C: Loss in breaking strength shall not be more than 15 percent Wrap)	-	0	-
6. Table 2 ix) b) IS 7016(Part 8) (Oven method) (Accelerated ageing test for 72 h at 70 ± 1°C: Loss in breaking strength shall not be more than 1 5 percent Weft)	-	0	-
6. Table 2 iii) IS 1969 (Part 1) ( Elongation at break)	-	0	-
6.5( Length : Unless specified otherwise, the standard length shall be 30 m. A tolerance of +5 percent shall be permitted on the length prescribed for the lay flat tube by the purchaser. No negative tolerance shall be permitted)	-	0	-
6. Table 2 vi) a) IS 14293 ( Trapezoid tear strength: Wrap)	-	0	-
6. Table 2 vi) b) IS 14293 ( Trapezoid tear strength : Weft)	-	0	-
6. Table 2 i) IS 1964 (Mass)	-	0	-
6. Table 2 vii) Annex C (Puncture strength)	-	0	-
6. Table 2 iv) b) Annex B(Retention of breaking strength after UV exposure of 500 h : weft 85 percent of original actual value (fabric))	-	0	-
6. Table 2 ii) b) IS 1969 (Part 1) ( Breaking strength before UV exposure : Weft)	-	0	-
6. Table 2 iv) a) Annex B(Retention of breaking strength after UV exposure of 500 h : Wrap 85 percent of original actual value (fabric))	-	0	-
6. Table 2 ii) a) IS 1969 (Part 1) ( Breaking strength before UV exposure : Wrap)	-	0	-
4,4.1 IS 6192( MATERIALS HDPE Tapes)	-	0	-
4.2 IS 6899(MATERIALS HDPE Fabric)	-	0	-
5,5.1(MANUFACTURE Lamination )	-	0	-
5,5.2(MANUFACTURE A 5 layer laminated fabric is produced using acombination of 2 layers of HDPE fabric and 3 layersof coating film. The minimum coating thickness shall be 35 µ. The layers of HDPE fabric used to manufacture lay flat tubes, shall be joined by sandwich lamination.The minimum thickness of the sandwich laminationshall be 40 µ. )	-	0	-
6(REQUIREMENTS)	-	0	-
6.3,6.3.1(Hydrostatic Burst Pressure Test)	-	0	-
6.7 IS 1969 (Part 1)(Welded Seam Strength Before UV Exposure : When a sample of fabric with seam cut from the lay flat tube is tested for welded seam strength as per the method specified in IS 1969 (Part 1), welded seam strength before UV exposure shall be not less than the 80 percent of the original actual fabric strength)	-	0	-
6.8 Annex B and IS 1969 (Part 1)(Welded Seam Strength After UV Exposure: When a sample of fabric with seam cut from the lay flat tube is tested for welded seam strength as per the method specified in Annex B and IS 1969 (Part 1), the loss in welded seam strength after UV exposure shall be not more than 15 percent)	-	0	-
6. Table 2 v) IS 14714 (Abrasion resistance : Loss in breaking strength shall not be more than 15 percent)	-	0	-
6. Table 2 ix) a) IS 7016(Part 8) (Oven method) (Accelerated ageing test for 72 h at 70 ± 1°C: Loss in breaking strength shall not be more than 15 percent Wrap)	-	0	-
6. Table 2 ix) b) IS 7016(Part 8) (Oven method) (Accelerated ageing test for 72 h at 70 ± 1°C: Loss in breaking strength shall not be more than 1 5 percent Weft)	-	0	-
6. Table 2 iii) IS 1969 (Part 1) ( Elongation at break)	-	0	-
6.5( Length : Unless specified otherwise, the standard length shall be 30 m. A tolerance of +5 percent shall be permitted on the length prescribed for the lay flat tube by the purchaser. No negative tolerance shall be permitted)	-	0	-
6. Table 2 vi) a) IS 14293 ( Trapezoid tear strength: Wrap)	-	0	-
6. Table 2 vi) b) IS 14293 ( Trapezoid tear strength : Weft)	-	0	-
6. Table 2 i) IS 1964 (Mass)	-	0	-
6. Table 2 vii) Annex C (Puncture strength)	-	0	-
6. Table 2 iv) b) Annex B(Retention of breaking strength after UV exposure of 500 h : weft 85 percent of original actual value (fabric))	-	0	-
6. Table 2 ii) b) IS 1969 (Part 1) ( Breaking strength before UV exposure : Weft)	-	0	-
6. Table 2 iv) a) Annex B(Retention of breaking strength after UV exposure of 500 h : Wrap 85 percent of original actual value (fabric))	-	0	-
6. Table 2 ii) a) IS 1969 (Part 1) ( Breaking strength before UV exposure : Wrap)	-	0	-
4,4.1 IS 6192( MATERIALS HDPE Tapes)	-	0	-
4.2 IS 6899(MATERIALS HDPE Fabric)	-	0	-
5,5.1(MANUFACTURE Lamination )	-	0	-
5,5.2(MANUFACTURE A 5 layer laminated fabric is produced using acombination of 2 layers of HDPE fabric and 3 layersof coating film. The minimum coating thickness shall be 35 µ. The layers of HDPE fabric used to manufacture lay flat tubes, shall be joined by sandwich lamination.The minimum thickness of the sandwich laminationshall be 40 µ. )	-	0	-
6(REQUIREMENTS)	-	0	-
6.2(Workmanship)	-	0	-
6.3,6.3.1(Hydrostatic Burst Pressure Test)	-	0	-
6.7 IS 1969 (Part 1)(Welded Seam Strength Before UV Exposure : When a sample of fabric with seam cut from the lay flat tube is tested for welded seam strength as per the method specified in IS 1969 (Part 1), welded seam strength before UV exposure shall be not less than the 80 percent of the original actual fabric strength)	-	0	-
6.8 Annex B and IS 1969 (Part 1)(Welded Seam Strength After UV Exposure: When a sample of fabric with seam cut from the lay flat tube is tested for welded seam strength as per the method specified in Annex B and IS 1969 (Part 1), the loss in welded seam strength after UV exposure shall be not more than 15 percent)	-	0	-
6. Table 2 v) IS 14714 (Abrasion resistance : Loss in breaking strength shall not be more than 15 percent)	-	0	-
6. Table 2 ix) a) IS 7016(Part 8) (Oven method) (Accelerated ageing test for 72 h at 70 ± 1°C: Loss in breaking strength shall not be more than 15 percent Wrap)	-	0	-
6. Table 2 ix) b) IS 7016(Part 8) (Oven method) (Accelerated ageing test for 72 h at 70 ± 1°C: Loss in breaking strength shall not be more than 1 5 percent Weft)	-	0	-
6. Table 2 iii) IS 1969 (Part 1) ( Elongation at break)	-	0	-
6.5( Length : Unless specified otherwise, the standard length shall be 30 m. A tolerance of +5 percent shall be permitted on the length prescribed for the lay flat tube by the purchaser. No negative tolerance shall be permitted)	-	0	-
6. Table 2 vi) a) IS 14293 ( Trapezoid tear strength: Wrap)	-	0	-
6. Table 2 vi) b) IS 14293 ( Trapezoid tear strength : Weft)	-	0	-
6. Table 2 i) IS 1964 (Mass)	-	0	-
6. Table 2 vii) Annex C (Puncture strength)	-	0	-
6. Table 2 iv) b) Annex B(Retention of breaking strength after UV exposure of 500 h : weft 85 percent of original actual value (fabric))	-	0	-
6. Table 2 ii) b) IS 1969 (Part 1) ( Breaking strength before UV exposure : Weft)	-	0	-
6. Table 2 iv) a) Annex B(Retention of breaking strength after UV exposure of 500 h : Wrap 85 percent of original actual value (fabric))	-	0	-
6. Table 2 ii) a) IS 1969 (Part 1) ( Breaking strength before UV exposure : Wrap)	-	0	-
4,4.1 IS 6192( MATERIALS HDPE Tapes)	-	0	-
4.2 IS 6899(MATERIALS HDPE Fabric)	-	0	-
5,5.1(MANUFACTURE Lamination )	-	0	-
5,5.2(MANUFACTURE A 5 layer laminated fabric is produced using acombination of 2 layers of HDPE fabric and 3 layersof coating film. The minimum coating thickness shall be 35 µ. The layers of HDPE fabric used to manufacture lay flat tubes, shall be joined by sandwich lamination.The minimum thickness of the sandwich laminationshall be 40 µ. )	-	0	-
6(REQUIREMENTS)	-	0	-
6.2(Workmanship)	-	0	-
6.3,6.3.1(Hydrostatic Burst Pressure Test)	-	0	-
6.7 IS 1969 (Part 1)(Welded Seam Strength Before UV Exposure : When a sample of fabric with seam cut from the lay flat tube is tested for welded seam strength as per the method specified in IS 1969 (Part 1), welded seam strength before UV exposure shall be not less than the 80 percent of the original actual fabric strength)	-	0	-
6.8 Annex B and IS 1969 (Part 1)(Welded Seam Strength After UV Exposure: When a sample of fabric with seam cut from the lay flat tube is tested for welded seam strength as per the method specified in Annex B and IS 1969 (Part 1), the loss in welded seam strength after UV exposure shall be not more than 15 percent)	-	0	-
6. Table 2 v) IS 14714 (Abrasion resistance : Loss in breaking strength shall not be more than 15 percent)	-	0	-
6. Table 2 ix) a) IS 7016(Part 8) (Oven method) (Accelerated ageing test for 72 h at 70 ± 1°C: Loss in breaking strength shall not be more than 15 percent Wrap)	-	0	-
6. Table 2 ix) b) IS 7016(Part 8) (Oven method) (Accelerated ageing test for 72 h at 70 ± 1°C: Loss in breaking strength shall not be more than 1 5 percent Weft)	-	0	-
6. Table 2 iii) IS 1969 (Part 1) ( Elongation at break)	-	0	-
6.5( Length : Unless specified otherwise, the standard length shall be 30 m. A tolerance of +5 percent shall be permitted on the length prescribed for the lay flat tube by the purchaser. No negative tolerance shall be permitted)	-	0	-
6. Table 2 vi) a) IS 14293 ( Trapezoid tear strength: Wrap)	-	0	-
6. Table 2 vi) b) IS 14293 ( Trapezoid tear strength : Weft)	-	0	-
6. Table 2 i) IS 1964 (Mass)	-	0	-
6. Table 2 vii) Annex C (Puncture strength)	-	0	-
6. Table 2 iv) b) Annex B(Retention of breaking strength after UV exposure of 500 h : weft 85 percent of original actual value (fabric))	-	0	-
6. Table 2 ii) b) IS 1969 (Part 1) ( Breaking strength before UV exposure : Weft)	-	0	-
6. Table 2 iv) a) Annex B(Retention of breaking strength after UV exposure of 500 h : Wrap 85 percent of original actual value (fabric))	-	0	-
6. Table 2 ii) a) IS 1969 (Part 1) ( Breaking strength before UV exposure : Wrap)	-	0	-
4,4.1 IS 6192( MATERIALS HDPE Tapes)	-	0	-
4.2 IS 6899(MATERIALS HDPE Fabric)	-	0	-
5,5.1(MANUFACTURE Lamination )	-	0	-
5,5.2(MANUFACTURE A 5 layer laminated fabric is produced using acombination of 2 layers of HDPE fabric and 3 layersof coating film. The minimum coating thickness shall be 35 µ. The layers of HDPE fabric used to manufacture lay flat tubes, shall be joined by sandwich lamination.The minimum thickness of the sandwich laminationshall be 40 µ. )	-	0	-
6(REQUIREMENTS)	-	0	-
6.2(Workmanship)	-	0	-
6.3,6.3.1(Hydrostatic Burst Pressure Test)	-	0	-
6.7 IS 1969 (Part 1)(Welded Seam Strength Before UV Exposure : When a sample of fabric with seam cut from the lay flat tube is tested for welded seam strength as per the method specified in IS 1969 (Part 1), welded seam strength before UV exposure shall be not less than the 80 percent of the original actual fabric strength)	-	0	-
6.8 Annex B and IS 1969 (Part 1)(Welded Seam Strength After UV Exposure: When a sample of fabric with seam cut from the lay flat tube is tested for welded seam strength as per the method specified in Annex B and IS 1969 (Part 1), the loss in welded seam strength after UV exposure shall be not more than 15 percent)	-	0	-
6.2(Workmanship)	-	0	-

-
Included w.e.f 04.03.2025 Exclusion: Cl 6.4 , 6.4.1 (Proof Pressure Test), Cl 6 Table 2 viii)Environmental stress cracking, Cl 6.6 (Kink Test ), Cl 6.1 Table 1 Conical Plug Gauge for measuring Internal Diameter, Cl 5,5.3 Table 1 Internal Diameter & Overlap of Lay Flat Tubes, Cl 6. Table 2 x) Annex E (Cold cracking resistance test at –5°C)

7953

ETDC (STQC), Ajmer

8181824

ER 01 (2024)

Essential Requirement (s) for Security of CCTV

275000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1.1(Application Debug Interface Protection)	-	9167	-
1.2(Device Unique Crypto Keys)	-	9167	-
1.3(On-Chip Debug Interface Protection)	-	9167	-
1.4(Trusted Execution)	-	9167	-
1.5(Secure Storage)	-	9167	-
1.6(Tamper Protection)	-	9167	-
1.7(IP Protection)	-	9167	-
1.8(Boot Image Validation)	-	9167	-
1.9(Secure PRNG Usage)	-	9167	-
2.1(Memory Protection Controls)	-	9167	-
2.2(Data Transit Security)	-	9167	-
2.3(Server Connection Validation)	-	9167	-
2.4(Banned C Functions)	-	9167	-
2.5(Software Bill of Materials)	-	9167	-
2.6(Secure Code Review)	-	9167	-
2.7(Digital Signature Pinning)	-	9167	-
2.8(Reverse Engineering Protection)	-	9167	-
2.9(Update Process Security)	-	9167	-
2.10(Code Signing Verification)	-	9167	-
2.11(Firmware Downgrade Protection)	-	9167	-
2.12(Scheduled Firmware Updates)	-	9167	-
3.1(Wireless Mutual Authentication)	-	9167	-
3.2(Wireless Encrypted Channel)	-	9167	-
3.3(Trusted Supply Chain)	-	9167	-
3.4(Supply Chain Risk Management)	-	9167	-
3.5(Proprietary Protocols Management)	-	9167	-
4.1(Anti-Counterfeit Measures)	-	9167	-
4.2(Threat Mitigation)	-	9167	-
4.3(Malware Detection Deployment)	-	9167	-
4.4(Supply Chain Risk Assessment)	-	9157	-

21 Oct, 2027

-
-

7954

ALAIPURIA TEST HOUSE PRIVATE LIMITED, GHAZIABAD

8180426

IS 302 : Part 2 : Sec 35 (2017)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 35 electric instantaneous water heaters (Second Revision)

-----

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.31(Verification)	-	100	-
Cl.30(Verification)	-	100	-
CL.29(Verification)	-	100	-
Cl.28(Verification)	-	100	-
Cl.27(Verification)	-	100	-
Cl.26(Verification)	-	100	-
Cl.25(Verification)	-	100	-
Cl.24(Verification)	-	100	-
Cl.23(Verification)	-	100	-
Cl.22(Verification)	-	100	-
Cl.21(Verification)	-	100	-
Cl.20(Verification)	-	100	-
Cl.19(Verification)	-	100	-
Cl.17(Verification)	-	100	-
Cl. 16(Verification)	-	100	-
Cl.15(Verification)	-	100	-
Cl.14(Verification)	-	100	-
Cl.13(Verification)	-	100	-
Cl.11(Verification)	-	100	-
Cl.10(Verification)	-	100	-
Cl.8(Verification)	-	100	-
Cl. 7(Verification)	-	100	-
Cl. 7(Verification)	-	100	-
Cl. 31 IS 302-2-35(Resistance to Rusting)	-	500	-
Cl. 30 IS 302-2-35(Resistance to Heat Fire & Tracking )	-	500	-
Cl. 29 IS 302-2-35(Clearances, Creepage Distances & Solid insulation )	-	250	-
Cl. 28 IS 302-2-35(Screws & Connections)	-	250	-
Cl. 27 IS 302-2-35(Provision for Earthing )	-	500	-
Cl. 26 IS 302-2-35(Terminals for External conductors )	-	250	-
Cl. 25 IS 302-2-35(Supply Connection & External Flexible Cords)	-	500	-
Cl. 24 IS 302-2-35(Components)	-	250	-
Cl. 23 IS 302-2-35(Internal Wiring)	-	250	-
Cl. 22 IS 302-2-35(Construction )	-	500	-
Cl. 21 IS 302-2-35(Mechanical strength)	-	250	-
Cl. 20 IS 302-2-35(Stability & Mechanical Hazards)	-	500	-
Cl. 19 IS 302-2-35(Abnormal Operation )	-	1000	-
Cl. 18 IS 302-2-35(Endurance)	-	50	-
Cl. 17 IS 302-2-35(Overload Protection of Transformers and Associated Circuit)	-	100	-
Cl. 16 IS 302-2-35(Leakage Current & Electric Strength at Operating Temperature (After Humidity Treatment))	-	500	-
Cl. 15 IS 302-2-35(Moisture Resistance Test )	-	500	-
Cl. 14 IS 302-2-35(Radio and television interference suppression / Transient over voltages)	-	1000	-
Cl. 13 IS 302-2-35(Leakage Current & Electric Strength at Operating Temperature)	-	500	-
Cl. 11 IS 302-2-35(Heating)	-	500	-
Cl. 10 IS 302-2-35(Power Input and Current )	-	1000	-
Cl. 9 IS 302-2-35(Starting of motor operated appliances)	-	50	-
Cl. 8 IS 302-2-35(Protection against access to live parts)	-	250	-
Cl. 7 IS 302-2-35(Marking and Instruction)	-	100	-
Cl. 6 IS 302-2-35(Classification)	-	50	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	50	-
4(GENERAL REQUIREMENT)	-	50	-
Cl.32(Verification)	-	0	-
Cl. 31 IS 302-2-35(Resistance to Rusting)	-	250	-
Cl. 30 IS 302-2-35(Resistance to Heat Fire & Tracking )	-	250	-
Cl. 29 IS 302-2-35(Clearances, Creepage Distances & Solid insulation )	-	50	-
Cl. 28 IS 302-2-35(Screws & Connections)	-	100	-
Cl. 27 IS 302-2-35(Provision for Earthing )	-	100	-
Cl. 26 IS 302-2-35(Terminals for External conductors )	-	50	-
Cl. 25 IS 302-2-35(Supply Connection & External Flexible Cords)	-	50	-
Cl. 24 IS 302-2-35(Components)	-	100	-
Cl. 23 IS 302-2-35(Internal Wiring)	-	100	-
Cl. 22 IS 302-2-35(Construction )	-	50	-
Cl. 21 IS 302-2-35(Mechanical strength)	-	50	-
Cl. 20 IS 302-2-35(Stability & Mechanical Hazards)	-	50	-
Cl. 19 IS 302-2-35(Abnormal Operation )	-	100	-
Cl. 18 IS 302-2-35(Endurance)	-	50	-
Cl. 17 IS 302-2-35(Overload Protection of Transformers and Associated Circuit)	-	100	-
Cl. 16 IS 302-2-35(Leakage Current & Electric Strength at Operating Temperature (After Humidity Treatment))	-	100	-
Cl. 15 IS 302-2-35(Moisture Resistance Test )	-	100	-
Cl. 14 IS 302-2-35(Radio and television interference suppression / Transient over voltages)	-	100	-
Cl. 13 IS 302-2-35(Leakage Current & Electric Strength at Operating Temperature)	-	100	-
Cl. 11 IS 302-2-35(Heating)	-	100	-
Cl. 10 IS 302-2-35(Power Input and Current )	-	100	-
Cl. 9 IS 302-2-35(Starting of motor operated appliances)	-	100	-
Cl. 8 IS 302-2-35(Protection against access to live parts)	-	150	-
Cl. 7 IS 302-2-35(Marking and Instruction)	-	50	-
Cl. 6 IS 302-2-35(Classification)	-	50	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	50	-
4(GENERAL REQUIREMENT)	-	50	-
Cl. 31 IS 302-2-35(Resistance to Rusting)	-	250	-
Cl. 30 IS 302-2-35(Resistance to Heat Fire & Tracking )	-	250	-
Cl. 29 IS 302-2-35(Clearances, Creepage Distances & Solid insulation )	-	50	-
Cl. 28 IS 302-2-35(Screws & Connections)	-	100	-
Cl. 27 IS 302-2-35(Provision for Earthing )	-	100	-
Cl. 26 IS 302-2-35(Terminals for External conductors )	-	50	-
Cl. 25 IS 302-2-35(Supply Connection & External Flexible Cords)	-	50	-
Cl. 24 IS 302-2-35(Components)	-	100	-
Cl. 23 IS 302-2-35(Internal Wiring)	-	100	-
Cl. 22 IS 302-2-35(Construction )	-	50	-
Cl. 21 IS 302-2-35(Mechanical strength)	-	50	-
Cl. 20 IS 302-2-35(Stability & Mechanical Hazards)	-	50	-
Cl. 19 IS 302-2-35(Abnormal Operation )	-	100	-
Cl. 18 IS 302-2-35(Endurance)	-	50	-
Cl. 17 IS 302-2-35(Overload Protection of Transformers and Associated Circuit)	-	100	-
Cl. 16 IS 302-2-35(Leakage Current & Electric Strength at Operating Temperature (After Humidity Treatment))	-	100	-
Cl. 15 IS 302-2-35(Moisture Resistance Test )	-	100	-
Cl. 14 IS 302-2-35(Radio and television interference suppression / Transient over voltages)	-	100	-
Cl. 13 IS 302-2-35(Leakage Current & Electric Strength at Operating Temperature)	-	100	-
Cl. 11 IS 302-2-35(Heating)	-	100	-
Cl. 10 IS 302-2-35(Power Input and Current )	-	100	-
Cl. 9 IS 302-2-35(Starting of motor operated appliances)	-	100	-
Cl. 8 IS 302-2-35(Protection against access to live parts)	-	150	-
Cl. 7 IS 302-2-35(Marking and Instruction)	-	50	-
Cl. 6 IS 302-2-35(Classification)	-	50	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	50	-
4(GENERAL REQUIREMENT)	-	50	-
Cl. 31 IS 302-2-35(Resistance to Rusting)	-	250	-
Cl. 30 IS 302-2-35(Resistance to Heat Fire & Tracking )	-	250	-
Cl. 29 IS 302-2-35(Clearances, Creepage Distances & Solid insulation )	-	50	-
Cl. 28 IS 302-2-35(Screws & Connections)	-	100	-
Cl. 27 IS 302-2-35(Provision for Earthing )	-	100	-
Cl. 26 IS 302-2-35(Terminals for External conductors )	-	50	-
Cl. 25 IS 302-2-35(Supply Connection & External Flexible Cords)	-	50	-
Cl. 24 IS 302-2-35(Components)	-	100	-
Cl. 23 IS 302-2-35(Internal Wiring)	-	100	-
Cl. 22 IS 302-2-35(Construction )	-	50	-
Cl. 21 IS 302-2-35(Mechanical strength)	-	50	-
Cl. 20 IS 302-2-35(Stability & Mechanical Hazards)	-	50	-
Cl. 19 IS 302-2-35(Abnormal Operation )	-	100	-
Cl. 18 IS 302-2-35(Endurance)	-	50	-
Cl. 17 IS 302-2-35(Overload Protection of Transformers and Associated Circuit)	-	100	-
Cl. 16 IS 302-2-35(Leakage Current & Electric Strength at Operating Temperature (After Humidity Treatment))	-	100	-
Cl. 15 IS 302-2-35(Moisture Resistance Test )	-	100	-
Cl. 14 IS 302-2-35(Radio and television interference suppression / Transient over voltages)	-	100	-
Cl. 13 IS 302-2-35(Leakage Current & Electric Strength at Operating Temperature)	-	100	-
Cl. 11 IS 302-2-35(Heating)	-	100	-
Cl. 10 IS 302-2-35(Power Input and Current )	-	100	-
Cl. 9 IS 302-2-35(Starting of motor operated appliances)	-	100	-
Cl. 8 IS 302-2-35(Protection against access to live parts)	-	150	-
Cl. 7 IS 302-2-35(Marking and Instruction)	-	50	-
Cl. 6 IS 302-2-35(Classification)	-	50	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	50	-
4(GENERAL REQUIREMENT)	-	50	-
Cl. 31 IS 302-2-35(Resistance to Rusting)	-	500	-
Cl. 30 IS 302-2-35(Resistance to Heat Fire & Tracking )	-	500	-
Cl. 29 IS 302-2-35(Clearances, Creepage Distances & Solid insulation )	-	250	-
Cl. 28 IS 302-2-35(Screws & Connections)	-	250	-
Cl. 27 IS 302-2-35(Provision for Earthing )	-	500	-
Cl. 26 IS 302-2-35(Terminals for External conductors )	-	250	-
Cl. 25 IS 302-2-35(Supply Connection & External Flexible Cords)	-	500	-
Cl. 24 IS 302-2-35(Components)	-	250	-
Cl. 23 IS 302-2-35(Internal Wiring)	-	250	-
Cl. 22 IS 302-2-35(Construction )	-	500	-
Cl. 21 IS 302-2-35(Mechanical strength)	-	250	-
Cl. 20 IS 302-2-35(Stability & Mechanical Hazards)	-	500	-
Cl. 19 IS 302-2-35(Abnormal Operation )	-	1000	-
Cl. 18 IS 302-2-35(Endurance)	-	50	-
Cl. 17 IS 302-2-35(Overload Protection of Transformers and Associated Circuit)	-	100	-
Cl. 16 IS 302-2-35(Leakage Current & Electric Strength at Operating Temperature (After Humidity Treatment))	-	500	-
Cl. 15 IS 302-2-35(Moisture Resistance Test )	-	500	-
Cl. 14 IS 302-2-35(Radio and television interference suppression / Transient over voltages)	-	1000	-
Cl. 13 IS 302-2-35(Leakage Current & Electric Strength at Operating Temperature)	-	500	-
Cl. 11 IS 302-2-35(Heating)	-	500	-
Cl. 10 IS 302-2-35(Power Input and Current )	-	1000	-
Cl. 9 IS 302-2-35(Starting of motor operated appliances)	-	50	-
Cl. 8 IS 302-2-35(Protection against access to live parts)	-	250	-
Cl. 7 IS 302-2-35(Marking and Instruction)	-	100	-
Cl. 6 IS 302-2-35(Classification)	-	50	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	50	-
4(GENERAL REQUIREMENT)	-	50	-
Cl. 31 IS 302-2-35(Resistance to Rusting)	-	100	-
Cl. 30 IS 302-2-35(Resistance to Heat Fire & Tracking )	-	100	-
Cl. 29 IS 302-2-35(Clearances, Creepage Distances & Solid insulation )	-	250	-
Cl. 28 IS 302-2-35(Screws & Connections)	-	100	-
Cl. 27 IS 302-2-35(Provision for Earthing )	-	500	-
Cl. 26 IS 302-2-35(Terminals for External conductors )	-	100	-
Cl. 25 IS 302-2-35(Supply Connection & External Flexible Cords)	-	250	-
Cl. 24 IS 302-2-35(Components)	-	100	-
Cl. 23 IS 302-2-35(Internal Wiring)	-	100	-
Cl. 22 IS 302-2-35(Construction )	-	100	-
Cl. 21 IS 302-2-35(Mechanical strength)	-	100	-
Cl. 20 IS 302-2-35(Stability & Mechanical Hazards)	-	200	-
Cl. 19 IS 302-2-35(Abnormal Operation )	-	200	-
Cl. 18 IS 302-2-35(Endurance)	-	100	-
Cl. 17 IS 302-2-35(Overload Protection of Transformers and Associated Circuit)	-	100	-
Cl. 16 IS 302-2-35(Leakage Current & Electric Strength at Operating Temperature (After Humidity Treatment))	-	500	-
Cl. 15 IS 302-2-35(Moisture Resistance Test )	-	500	-
Cl. 14 IS 302-2-35(Radio and television interference suppression / Transient over voltages)	-	500	-
Cl. 13 IS 302-2-35(Leakage Current & Electric Strength at Operating Temperature)	-	500	-
Cl. 11 IS 302-2-35(Heating)	-	500	-
Cl. 10 IS 302-2-35(Power Input and Current )	-	1000	-
Cl. 9 IS 302-2-35(Starting of motor operated appliances)	-	100	-
Cl. 8 IS 302-2-35(Protection against access to live parts)	-	250	-
Cl. 7 IS 302-2-35(Marking and Instruction)	-	100	-
Cl. 6 IS 302-2-35(Classification)	-	50	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	100	-
4(GENERAL REQUIREMENT)	-	100	-
Cl. 31 IS 302-2-35(Resistance to Rusting)	-	250	-
Cl. 30 IS 302-2-35(Resistance to Heat Fire & Tracking )	-	250	-
Cl. 29 IS 302-2-35(Clearances, Creepage Distances & Solid insulation )	-	50	-
Cl. 28 IS 302-2-35(Screws & Connections)	-	100	-
Cl. 27 IS 302-2-35(Provision for Earthing )	-	100	-
Cl. 26 IS 302-2-35(Terminals for External conductors )	-	50	-
Cl. 25 IS 302-2-35(Supply Connection & External Flexible Cords)	-	50	-
Cl. 24 IS 302-2-35(Components)	-	100	-
Cl. 23 IS 302-2-35(Internal Wiring)	-	100	-
Cl. 22 IS 302-2-35(Construction )	-	50	-
Cl. 21 IS 302-2-35(Mechanical strength)	-	50	-
Cl. 20 IS 302-2-35(Stability & Mechanical Hazards)	-	50	-
Cl. 19 IS 302-2-35(Abnormal Operation )	-	100	-
Cl. 18 IS 302-2-35(Endurance)	-	50	-
Cl. 17 IS 302-2-35(Overload Protection of Transformers and Associated Circuit)	-	100	-
Cl. 16 IS 302-2-35(Leakage Current & Electric Strength at Operating Temperature (After Humidity Treatment))	-	100	-
Cl. 15 IS 302-2-35(Moisture Resistance Test )	-	100	-
Cl. 14 IS 302-2-35(Radio and television interference suppression / Transient over voltages)	-	100	-
Cl. 13 IS 302-2-35(Leakage Current & Electric Strength at Operating Temperature)	-	100	-
Cl. 11 IS 302-2-35(Heating)	-	100	-
Cl. 10 IS 302-2-35(Power Input and Current )	-	100	-
Cl. 9 IS 302-2-35(Starting of motor operated appliances)	-	100	-
Cl. 8 IS 302-2-35(Protection against access to live parts)	-	150	-
Cl. 7 IS 302-2-35(Marking and Instruction)	-	50	-
Cl. 6 IS 302-2-35(Classification)	-	50	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	50	-
4(GENERAL REQUIREMENT)	-	50	-
Cl. 31 IS 302-2-35(Resistance to Rusting)	-	250	-
Cl. 30 IS 302-2-35(Resistance to Heat Fire & Tracking )	-	250	-
Cl. 29 IS 302-2-35(Clearances, Creepage Distances & Solid insulation )	-	50	-
Cl. 28 IS 302-2-35(Screws & Connections)	-	100	-
Cl. 27 IS 302-2-35(Provision for Earthing )	-	100	-
Cl. 26 IS 302-2-35(Terminals for External conductors )	-	50	-
Cl. 25 IS 302-2-35(Supply Connection & External Flexible Cords)	-	50	-
Cl. 24 IS 302-2-35(Components)	-	100	-
Cl. 23 IS 302-2-35(Internal Wiring)	-	100	-
Cl. 22 IS 302-2-35(Construction )	-	50	-
Cl. 21 IS 302-2-35(Mechanical strength)	-	50	-
Cl. 20 IS 302-2-35(Stability & Mechanical Hazards)	-	50	-
Cl. 19 IS 302-2-35(Abnormal Operation )	-	100	-
Cl. 18 IS 302-2-35(Endurance)	-	50	-
Cl. 17 IS 302-2-35(Overload Protection of Transformers and Associated Circuit)	-	100	-
Cl. 16 IS 302-2-35(Leakage Current & Electric Strength at Operating Temperature (After Humidity Treatment))	-	100	-
Cl. 15 IS 302-2-35(Moisture Resistance Test )	-	100	-
Cl. 14 IS 302-2-35(Radio and television interference suppression / Transient over voltages)	-	100	-
Cl. 13 IS 302-2-35(Leakage Current & Electric Strength at Operating Temperature)	-	100	-
Cl. 11 IS 302-2-35(Heating)	-	100	-
Cl. 10 IS 302-2-35(Power Input and Current )	-	100	-
Cl. 9 IS 302-2-35(Starting of motor operated appliances)	-	100	-
Cl. 8 IS 302-2-35(Protection against access to live parts)	-	150	-
Cl. 7 IS 302-2-35(Marking and Instruction)	-	50	-
Cl. 6 IS 302-2-35(Classification)	-	50	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	50	-
4(GENERAL REQUIREMENT)	-	50	-

03 Oct, 2027

-
included w.e.f.29.10.2024 Exclusion Cl. 32 IS 302-2-35 (Radiation, Toxicity and similar hazards) 19.11.4.7 (Harmonics) 19.11.4.6 (Class 3 Voltage dips and interruptions) 19.11.4.5 (Immunity to conducted discharges) 19.11.4.4 (Surge immunity test) 19.11.4.3 (Fast transient bursts) 19.11.4.2 (Radiated fields) 19.11.4.1 (Electrostatic discharges) Cl.32 (Verification)

7955

Perficio Testing and Research Centre, Vadodara

7172436

IS 16192 : Part 2 (2014)

Automotive vehicles - Wheel rims for two and three wheeled vehicles: Part 2 sheet metal wheel rims - Method of tests and requirements

Sheet Metal Rim for 2 & 3 Wheelers and HYBRID WHEEL RIM

90000 View breakup
Complete testing charges for Steel Wheels– INR 85,000/- Complete testing charges for Aluminium Wheels– INR 90,000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.3.4(a) For three wheeled vehicles: 18000 load cycle)	-	31000	Complete testing charges for Steel Wheels– INR 85,000/-
4.2.3.4(b) For two wheeled vehicles:no of cycle 100 000)	-	31000	Complete testing charges for Steel Wheels– INR 85,000/-
4.2.4(Dynamic Radial Fatigue Test (RFT))	-	71000	Complete testing charges for Steel Wheels– INR 85,000/-
4.2.2(Performance Strength Requirements)	-	158000	COMPLETE TESTING CHARGES FOR HYBRID WHEEL RIM - INR 1,58,000/-.

28 May, 2029

-
AMENDMENT NO. 2 included w.e.f. 17.10.2024

7956

ABB ELSP LAB, Bengaluru

6184126

IS/IEC 60947 : PART 3 (2020)

Low-Voltage Switchgear and Controlgear: Part 3 Switches Disconnectors Switch-Disconnectors and Fuse-Combination Units

115340 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.3.5.2(Operational performance test)	-	20000	-
9.3.4.5(Dielectric verification)	-	11068	-
9.3.4.6(Leakage current)	-	11068	-
9.3.4.2(Temperature-rise)	-	20000	-
9.3.8.2(Overload test)	-	11068	-

05 Mar, 2028

-
Restricted only for Sequence II & V.

7957

ABB ELSP LAB, Bengaluru

6184126

IS/IEC 60947 : Part 4 : Sec 1 (2012)

Low - Voltage switchgear and controlgear: Part 4 contactors and motor - Starters: Sec 1 electromechanical contactors and motor - Starters (First Revision)

292136 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.3.3.3.2 (Measurement of the temperature of parts )	-	20000	-
9.3.3.3.3( Temperature rise of a part )	-	20000	-
9.3.3.3.4 (Temperature rise of the main circuit )	-	20000	-
9.3.3.3.5( Temperature rise of control circuit)	-	20000	-
9.3.3.3.6( Temperature rise of coils and electromagnets )	-	20000	-
9.3.3.3.7 (Temperature rise of auxiliary circuits )	-	20000	-
9.3.3.3.8 (Temperature rise of starting resistors for rheostatic rotor starters )	-	20000	-
9.3.3.3.9( Temperature rise of the auto-transformer for two-step auto-transformer starters)	-	20000	-
9.3.3.2(Operating limits)	-	20000	-
9.3.3.2.1(Power-operated equipment)	-	20000	-
9.3.3.2.1.2(Coil power consumption)	-	20000	-
9.3.3.4 (Dielectric properties )	-	11068	-
9.3.5(Overload current withstand capability of contactors)	-	20000	-
9.1.2, (i) (8.2.4 of IEC 60947-1:2007)(Mechanical properties of terminals)	-	20000	-
9.1.2 (j) (Annex C of IEC 60947-1)(verification of degrees of protection of enclosed contactors and starters)	-	11068	-
9.3.3.5("verification of rated making and breaking capacities, change-over ability and reversibility, where applicable")	-	25000	-
9.3.3.6(verification of conventional operational performance)	-	25000	-

05 Mar, 2028

-
Restricted only for Sequence III.

7958

HT Product Services Private Limited, Noida

8175006

IS 13252 : Part 1 (2010)

Information technology equipment - Safety: Part 1 general requirements (Second Revision)

60000 View breakup
Rs.60,000/- for Automatic Data Processing Machine, Laptop/Notebook/ Tablet, Printer, Plotter, Scanner, Set Top Box, Telephone answering machines, Visual display unit, videos monitors of screen size 32” & above , Cash Registers, Copying machine/ duplicator, Point of sale terminal, Mail processing machine/ postage machine/ Franking machine, Power adaptor for IT equipments, Visual display unit, videos monitors of screen size upto 32”, Passport Reader, Power bank for use in portable applications, Mobile phones, Smart card reader, CCTV Camera/ CCTV Recorders, USB driven Barcode readers, Barcode scanners, iris scanners, Optical Fingerprint Scanners, Smart watches, Wireless Keyboard, Keyboard, Automatic Teller Cash Dispensing Machines, USB Type External Hard Disk Drive, USB type External Solid State Storage Devices (above 256 GB Capacity), Standalone Switch Mode Power supplies (SMPS) with output Voltage 48 V (max.), Digital Camera.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

03 Dec, 2026

-
Exclusion: Cl.1.5 (Components), Cl.2.8.7 (relays), Cl.2.10.8 (PCB), Cl.4.2.8 (Cathode ray tubes), Cl.4.2.9 (High pressure lamps), Cl.4.3.12 (Flammable liquids), Cl.4.3.13 (Radiation), Cl.4.6.2 (Bottoms of fire enclosures), Annex A3 Hot flaming oil test, Annex CC Evaluation of integrated circuit current limiter, Annex Q Voltage Dependent Resistors, Cl.2.8.5 (Moving parts), Annex K (Thermal controls), Annex Y (UV Conditioning test)

7959

Ace Test Labs & Metrology Pvt. Ltd., Sonipat

9162826

IS 16270 (2023)

Secondary cells and batteries for solar photovoltaic application - General requirements and methods of test

750000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(Photovoltaic Energy System)	-	25000	-
Cl-4.2(Secondary Cells and Batteries)	-	25000	-
Cl-4.3(General Operating Conditions)	-	25000	-
Cl-4.3.8(Storage)	-	50000	-
Cl-4.3.9(Operating Temperature)	-	50000	-
Cl-5.1(Mechanical Endurance)	-	50000	-
Cl-5.2(Charge Efficiency)	-	25000	-
Cl-5.3(Deep Discharge Protection)	-	25000	-
Cl-5.4(Marking)	-	25000	-
Cl-5.5(Safety)	-	25000	-
Cl-5.6(Documentation)	-	25000	-
Cl-6(Functional characteristice)	-	25000	-
Cl-7(General test conditions)	-	25000	-
Cl-8.1(Capacity Test)	-	90000	-
Cl-8.2(Endurance Test)	-	500000	-
Cl-8.3(Charge Retention Test)	-	250000	-
Cl-8.4(Cycle Endurance in Photovoltaic Application (Extreme Conditions))	-	400000	-
Cl-8.5(Sulphation Test (Applicable for Lead Acid Batteries only))	-	60000	-
Cl-8.6(Water Loss Test (Valid for Flooded Lead Acid Batteries only))	-	150000	-
Cl-9.1(Type Tests)	-	750000	-
Cl-9.2(Acceptance Test)	-	100000	-
4.3.7.1(Specific gravity)	-	50000	-

14 Nov, 2027

-
Included w.e.f 04.03.2025

7960

HT Product Services Private Limited, Noida

8175006

IS 16046 : Part 1 (2018)

Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes ” Safety Requirements for Portable Sealed Secondary Cells and for Batteries Made from Them for Use in Portable Applications Part 1 Nickel Systems ( Second Revision )

100000 View breakup
Rs. 100000/- (for batteries upto 150 Ah, 30 V, for cells uto 300 Ah, 30V)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Parameter Measurement Tolerances)	-	0	ok
5(General Safety Considerations)	-	0	ok
5.1(General)	-	0	-
5.2(Insulation and Wiring)	-	3000	-
5.3(Venting)	-	500	-
5.4(Temperature, Voltage and Current Management)	-	100	-
5.5(Terminal Contacts)	-	100	-
5.6(Assembly of Cells into batteries)	-	100	-
5.7(Quality Plan)	-	100	-
6(Tyoe Test amd Sample Size)	-	100	-
7(Specific requirements and tests)	-	100	-
7.1(Charging procedure for test purposes)	-	300	-
7.2(Intended Use)	-	35000	-
7.3(Reasonably foreseeable misuse)	-	60000	-
8(Information for safety)	-	0	-
8.1(General)	-	0	-
8.2(Small Cell and battery safety information)	-	500	-
9(Marking)	-	500	-
9.1(Cell Marking)	-	0	-
9.2(Battery Marking)	-	0	-
9.3(Caution for ingestion of small cells and batteries)	-	0	-
9.4(Other information)	-	0	-
10(Packaging)	-	0	-

03 Dec, 2026

-
-

7961

HT Product Services Private Limited, Noida

8175006

IS 616 (2017)

Audio, video and similar electronic apparatus - Safety requirements (Fifth Revision)

60000 View breakup
Rs. 60,000/- for Amplifiers with input power 2000W and above, Electronic games (Video), Plasma/ LCD/ LED TV of screen size 32” & above , Electronic musical system with input power 200W and above , Optical disc player with built in amplifiers of input power 200W and above, Power adopters for audio, video & similar electronic apparatus, Plasma/ LCD/ LED TV of screen size up to 32”, Wireless headphone and earphone, Electronic Musical System with input power below 200W, Television other than plasma / LCD / LED/ TVs, Wireless microphone, Video camera, Webcam (Finished product), Smart speaker (with and without display), Bluetooth speakers

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking and instructions)	-	2500	-
5(Marking and instructions)	-	2500	-
6(Hazardous radiations)	-	0	-
6(Hazardous radiations)	-	0	-
7(Heating under normal operating conditions)	-	3000	-
7(Heating under normal operating conditions)	-	3000	-
8(Constructional requirements with regard to the protection against electric shock)	-	4000	-
8(Constructional requirements with regard to the protection against electric shock)	-	4000	-
9(Electric shock hazard under normal operating conditions)	-	5000	-
9(Electric shock hazard under normal operating conditions)	-	5000	-
10(Insulation requirements)	-	8500	-
10(Insulation requirements)	-	8500	-
11(Fault conditions)	-	2000	-
11(Fault conditions)	-	2000	-
12(Mechanical strength)	-	7500	-
13(CLEARANCES and CREEPAGE DISTANCES)	-	2500	-
13(CLEARANCES and CREEPAGE DISTANCES)	-	2500	-
14(Components)	-	0	-
14(Components)	-	0	-
15(TERMINALS)	-	2000	-
15(TERMINALS)	-	2000	-
16(External flexible cords)	-	1500	-
16(External flexible cords)	-	1500	-
17(Electrical connections and mechanical fixings)	-	1500	-
17(Electrical connections and mechanical fixings)	-	1500	-
18(Mechanical strength of picture tubes and protection against the effects of implosion)	-	0	-
18(Mechanical strength of picture tubes and protection against the effects of implosion)	-	0	-
19(Stability and mechanical hazards)	-	1000	-
19(Stability and mechanical hazards)	-	1000	-
20(Resistance to fire)	-	6000	-
20(Resistance to fire)	-	6000	-
Annex-A(Additional requirements for apparatus with protection against splashing water)	-	5000	-
Annex-A(Additional requirements for apparatus with protection against splashing water)	-	5000	-
Annex-B(Apparatus to be connected to the TELECOMMUNICATION NETWORKS)	-	0	-
Annex-L(Additional requirements for electronic flash apparatus for photographic purposes)	-	0	-
Annex-L(Additional requirements for electronic flash apparatus for photographic purposes)	-	0	-
8.16/ H 2.2/ H 2.3(Requirements for insulated winding wires for use without additional interleaved insulation)	-	0	-
8.16/ H 2.2/ H 2.3(Requirements for insulated winding wires for use without additional interleaved insulation)	-	0	-
3(General requirements)	-	0	-
3(General requirements)	-	0	-
4(General test conditions)	-	0	-
4(General test conditions)	-	0	-
6.1(Ionizing radiation)	-	0	-
6.2(Laser Radiation)	-	0	-
6.3()	-	0	-
6.3()	-	0	-
8.16(Wound Component)	-	0	-
14(Components)	-	0	-
14(Components)	-	0	-
15(Internal wires and power cords)	-	0	-
16.3b(Cord Bending Test)	-	0	-
16.3b(Cord Bending Test)	-	0	-
20.2.4(Printed Boards)	-	0	-
20.2.4(Printed Boards)	-	0	-
Cl.5.1 of Cl.5(General requirements)	-	0	-
Cl.5.1 of Cl.5(General requirements)	-	0	-
Cl.5.1-i) of Cl.5(Comprehensible and easily discernible)	-	0	-
Cl.5.1-i) of Cl.5(Comprehensible and easily discernible)	-	0	-
Cl.5.1-ii) of Cl.5(Permanent durability against water and petroleum spirit)	-	0	-
Cl.5.1-ii) of Cl.5(Permanent durability against water and petroleum spirit)	-	0	-
Cl.5.2 of Cl.5(Identification and supply ratings)	-	0	-
Cl.5.2 of Cl.5(Identification and supply ratings)	-	0	-
Cl.5.2 a) of Cl.5(Identification, maker)	-	0	-
Cl.5.2 a) of Cl.5(Identification, maker)	-	0	-
Cl.5.2 b) of Cl.5(Model number or type reference)	-	0	-
Cl.5.2 b) of Cl.5(Model number or type reference)	-	0	-
Cl.5.2 d) of Cl.5(Nature of supply)	-	0	-
Cl.5.2 d) of Cl.5(Nature of supply)	-	0	-
Cl.5.2 e) of Cl.5(Rated supply voltage)	-	0	-
Cl.5.2 e) of Cl.5(Rated supply voltage)	-	0	-
Cl.5.2 f) of Cl.5(Mains frequency if safety dependant)	-	0	-
Cl.5.2 f) of Cl.5(Mains frequency if safety dependant)	-	0	-
Cl.5.2 g) of Cl.5(Rated current or power consumption for apparatus supplied by supply apparatus for general use, on apparatus or in instruction manual: Measured current or power consumption: Deviation % (max 10%):)	-	0	-
Cl.5.2 g) of Cl.5(Rated current or power consumption for apparatus supplied by supply apparatus for general use, on apparatus or in instruction manual: Measured current or power consumption: Deviation % (max 10%):)	-	0	-
Cl.5.2 h) of Cl.5(Rated current or power consumption for apparatus intended for connection to an a.c. mains supply:Measured current or power consumption for Television set: Deviation % (max 10%):)	-	0	-
Cl.5.2 h) of Cl.5(Rated current or power consumption for apparatus intended for connection to an a.c. mains supply:Measured current or power consumption for Television set: Deviation % (max 10%):)	-	0	-
Cl.5.2 h)-ii) of Cl.5(Graphical symbols placed on the apparatus, whether required by this standard or not, shall be in accordance with IEC 60417 or ISO 3864-2 or ISO 7000, if available. In the absence of suitable symbols, the manufacturer may design specific graphical symbols.)	-	0	-
Cl.5.2 h)-ii) of Cl.5(Graphical symbols placed on the apparatus, whether required by this standard or not, shall be in accordance with IEC 60417 or ISO 3864-2 or ISO 7000, if available. In the absence of suitable symbols, the manufacturer may design specific graphical symbols.)	-	0	-
Cl.5.2 h)-iii) of Cl.5(Care shall be taken so that additional markings and instructions not required by this standard do not contradict the markings and instructions required by this standard . Symbols placed on the Equipment shall be explained in the user manual.)	-	0	-
Cl.5.2 h)-iii) of Cl.5(Care shall be taken so that additional markings and instructions not required by this standard do not contradict the markings and instructions required by this standard . Symbols placed on the Equipment shall be explained in the user manual.)	-	0	-
Cl.5.3 of Cl.5(Terminals)	-	0	-
Cl.5.3 of Cl.5(Terminals)	-	0	-
Cl.5.3a) of Cl.5(Earth terminal)	-	0	-
Cl.5.3a) of Cl.5(Earth terminal)	-	0	-
Cl.5.3b) of Cl.5(Hazardous live terminals)	-	0	-
Cl.5.3b) of Cl.5(Hazardous live terminals)	-	0	-
Cl.5.3c) of Cl.5(Markings on supply output terminals)	-	0	-
Cl.5.3c) of Cl.5(Markings on supply output terminals)	-	0	-
Cl.5.4 of Cl.5(Caution marking)	-	0	-
Cl.5.4 of Cl.5(Caution marking)	-	0	-
Cl.5.4a) of Cl.5(Use of triangle with exclamation mark)	-	0	-
Cl.5.4a) of Cl.5(Use of triangle with exclamation mark)	-	0	-
Cl.5.4b) of Cl.5(Marking on loudspeaker grille, IEC 60417-5036)	-	0	-
Cl.5.4b) of Cl.5(Marking on loudspeaker grille, IEC 60417-5036)	-	0	-
Cl.5.4c) of Cl.5(User-replaceable coin / button cell battery marking)	-	0	-
Cl.5.4c) of Cl.5(User-replaceable coin / button cell battery marking)	-	0	-
Cl.5.5 of Cl.5(Instructions)	-	0	-
Cl.5.5 of Cl.5(Instructions)	-	0	-
Cl.7.1 of Cl.7(General)	-	0	-
Cl.7.1 of Cl.7(General)	-	0	-
"Cl.7.1.1 of Cl.7.1 Table-3"(Requirements)	-	0	-
"Cl.7.1.1 of Cl.7.1 Table-3"(Requirements)	-	0	-
"Cl.7.1.2 of Cl.7.1 Table-3"(Accessible parts)	-	0	-
"Cl.7.1.2 of Cl.7.1 Table-3"(Accessible parts)	-	0	-
"Cl.7.1.3 of Cl.7.1 Table-3"(Parts, other than windings and printed boards, providing electrical insulation)	-	0	-
"Cl.7.1.3 of Cl.7.1 Table-3"(Parts, other than windings and printed boards, providing electrical insulation)	-	0	-
"Cl.7.1.4 of Cl.7.1 Table-3"(Parts acting as a support or a mechanical barrier)	-	0	-
"Cl.7.1.4 of Cl.7.1 Table-3"(Parts acting as a support or a mechanical barrier)	-	0	-
"Cl.7.1.5 of Cl.7.1 Table-3"(Windings)	-	0	-
"Cl.7.1.5 of Cl.7.1 Table-3"(Windings)	-	0	-
"Cl.7.1.6 of Cl.7.1 Table-3"(Parts not subject to a limit under7.1.1 to 7.1.4)	-	0	-
"Cl.7.1.6 of Cl.7.1 Table-3"(Parts not subject to a limit under7.1.1 to 7.1.4)	-	0	-
Cl.7.2 of Cl.7(Softening temperature of insulating material supporting parts conductively connected to the mains carrying a current> 0.2 A, shall be at least 150ºC)	-	0	-
Cl.7.2 of Cl.7(Softening temperature of insulating material supporting parts conductively connected to the mains carrying a current> 0.2 A, shall be at least 150ºC)	-	0	-
Cl.8.1 of Cl.8(Conductive parts covered by lacquer, paper, untreated textile oxide films and beads etc. considered to be bare*)	-	0	-
Cl.8.2 of Cl.8(No shock hazard when changing voltage setting device, fuse-links or handling drawers etc.)	-	0	-
Cl.8.3 of Cl.8(Insulation of hazardous live parts not provided by hygroscopic material)	-	0	-
Cl.8.4 of Cl.8(No risk of electric shock from accessible parts or from parts rendered accessible following the removal of a cover which can be removed by hand)	-	0	-
Cl.8.5 of Cl.8(Class I apparatus*)	-	0	-
Cl.8.5 i) of Cl.8(Basic insulation between hazardous live parts and earthed accessible parts *)	-	0	-
Cl.8.5 ii) of Cl.8(Resistors bridging basic insulation shall complying with 14.1 a) *)	-	0	-
Cl.8.5 iii) of Cl.8(Capacitors bridging basic insulation shall complying with 14.2.1 a) *)	-	0	-
Cl.8.5 iv) of Cl.8(Protective earthing terminal *)	-	0	-
Cl.8.5 iv) of Cl.8(Protective earthing terminal *)	-	0	-
Cl.8.6 of Cl.8(Class II apparatus)	-	0	-
Cl.8.6 of Cl.8(Class II apparatus)	-	0	-
Cl.8.6 a) of Cl.8(Basic and supplementary insulation between hazardous live parts and accessible parts *)	-	0	-
Cl.8.6 a) of Cl.8(Basic and supplementary insulation between hazardous live parts and accessible parts *)	-	0	-
Cl.8.6 b) of Cl.8(Reinforced insulation between hazardous live parts and accessible parts *)	-	0	-
Cl.8.6 b) of Cl.8(Reinforced insulation between hazardous live parts and accessible parts *)	-	0	-
Cl.8.7 of Cl.8(Components bridging insulation)	-	0	-
Cl.8.7 of Cl.8(Components bridging insulation)	-	0	-
Cl.8.7 i) of Cl.8(Basic insulation bridged by components complying with 14.4.5.3)	-	0	-
Cl.8.7 i) of Cl.8(Basic insulation bridged by components complying with 14.4.5.3)	-	0	-
Cl.8.7 ii) of Cl.8(Components bridging basic, supplementary, double or reinforced insulation complying with 14.2 a) or 14.4)	-	0	-
Cl.8.7 ii) of Cl.8(Components bridging basic, supplementary, double or reinforced insulation complying with 14.2 a) or 14.4)	-	0	-
Cl.8.7 iii) of Cl.8(Basic and supplementary insulation each being bridged by a capacitor or RC-unit complying with 14.3.2 a))	-	0	-
Cl.8.7 iii) of Cl.8(Basic and supplementary insulation each being bridged by a capacitor or RC-unit complying with 14.3.2 a))	-	0	-
Cl.8.7 iv) of Cl.8(Double or reinforced insulation being bridged with 2 capacitors or RC-units in series complying with 14.3.2 a))	-	0	-
Cl.8.7 iv) of Cl.8(Double or reinforced insulation being bridged with 2 capacitors or RC-units in series complying with 14.3.2 a))	-	0	-
Cl.8.7 v) of Cl.8(Double or reinforced insulation being bridged with a single capacitor or RC-unit complying with 14.3.2 b))	-	0	-
Cl.8.7 v) of Cl.8(Double or reinforced insulation being bridged with a single capacitor or RC-unit complying with 14.3.2 b))	-	0	-
Cl.8.8 of Cl.8(Insulation thickness and thin sheet materials)	-	0	-
Cl.8.8 of Cl.8(Insulation thickness and thin sheet materials)	-	0	-
Cl.8.8 i) of Cl.8(Basic or supplementary insulation > 0,4 mm (mm)*)	-	0	-
Cl.8.8 i) of Cl.8(Basic or supplementary insulation > 0,4 mm (mm)*)	-	0	-
Cl.8.8 ii) of Cl.8(Reinforced insulation > 0,4 mm (mm) *)	-	0	-
Cl.8.8 ii) of Cl.8(Reinforced insulation > 0,4 mm (mm) *)	-	0	-
Cl.8.8 iii) of Cl.8(Thin sheet material used inside the equipment)	-	0	-
Cl.8.8 iv) of Cl.8(Basic or supplementary insulation, atleast two layers, each meeting10.4)	-	0	-
Cl.8.8 iv) of Cl.8(Basic or supplementary insulation, atleast two layers, each meeting10.4)	-	0	-
Cl.8.8 v) of Cl.8(Basic or supplementary insulation, three layers any two of which meet10.4)	-	0	-
Cl.8.8 vi) of Cl.8(Reinforced insulation, two layers each of which meet 10.4)	-	0	-
Cl.8.8 vi) of Cl.8(Reinforced insulation, two layers each of which meet 10.4)	-	0	-
Cl.8.9 of Cl.8(Adequate insulation between internal hazardous live conductors and accessible parts, or between internal hazardous live parts and conductors connected to accessible parts)	-	0	-
Cl.8.9 of Cl.8(Adequate insulation between internal hazardous live conductors and accessible parts, or between internal hazardous live parts and conductors connected to accessible parts)	-	0	-
Cl.8.10 of Cl.8(Double insulation between accessible parts and conductors connected to the mains)	-	0	-
Cl.8.10 of Cl.8(Double insulation between conductors connected to accessible parts and parts connected to the mains)	-	0	-
Cl.8.10 of Cl.8(Double insulation between conductors connected to accessible parts and parts connected to the mains)	-	0	-
Cl.8.11 of Cl.8(Detaching of wires)	-	0	-
Cl.8.11 of Cl.8(Detaching of wires)	-	0	-
Cl.8.12 of Cl.8(Adequate fastening of windows, lenses, lamp covers etc. (pull test 20 N for 10 s))	-	0	-
Cl.8.12 of Cl.8(Adequate fastening of windows, lenses, lamp covers etc. (pull test 20 N for 10 s))	-	0	-
Cl.8.13 of Cl.8(Adequate fastening of windows, lenses, lamp covers etc. (pull test 20 N for 10 s))	-	0	-
Cl.8.13 of Cl.8(Adequate fastening of windows, lenses, lamp covers etc. (pull test 20 N for 10 s))	-	0	-
Cl.8.14 of Cl.8(No risk of damage to the insulation of internal wiring due to hot parts or sharp edges)	-	0	-
Cl.8.14 of Cl.8(No risk of damage to the insulation of internal wiring due to hot parts or sharp edges)	-	0	-
Cl.8.15 of Cl.8(Only special supply equipment can be used*)	-	0	-
Cl.8.16 of Cl.8(Insulated winding wire without additional interleaved insulation)	-	0	-
Cl.8.16 of Cl.8(Insulated winding wire without additional interleaved insulation)	-	0	-
Cl.8.18 of Cl.8(Disconnection from the mains)	-	0	-
Cl.8.18 of Cl.8(Disconnection from the mains)	-	0	-
Cl.8.18 i) of Cl.8(Disconnect device used in apparatus)	-	0	-
Cl.8.18 i) of Cl.8(Disconnect device used in apparatus)	-	0	-
Cl.8.18 ii) of Cl.8(All-pole switch or circuit breaker with >3mm contact separation.)	-	0	-
Cl.8.18 ii) of Cl.8(All-pole switch or circuit breaker with >3mm contact separation.)	-	0	-
Cl.8.18 iii) of Cl.8(Mains switch ON indication *)	-	0	-
Cl.8.18 iii) of Cl.8(Mains switch ON indication *)	-	0	-
Cl.8.19 of Cl.8(Switch not fitted in the mains cord *)	-	0	-
Cl.8.19 of Cl.8(Switch not fitted in the mains cord *)	-	0	-
Cl.8.20 of Cl.8(Bridging components comply with clause 14)	-	0	-
Cl.8.20 of Cl.8(Bridging components comply with clause 14)	-	0	-
Cl.8.21 of Cl.8(Non-separable thin sheet material)	-	0	-
Cl.8.21 of Cl.8(Non-separable thin sheet material)	-	0	-
Cl.9.1 of Cl.9(Testing on the outside)	-	0	-
Cl.9.1 of Cl.9(Testing on the outside)	-	0	-
Cl.9.1.1 of Cl.9.1(Requirements)	-	0	-
Cl.9.1.1 of Cl.9.1(Requirements)	-	0	-
Cl.9.1.1 i) of Cl.9.1(Accessible parts shall not be hazardous live)	-	0	-
Cl.9.1.1 i) of Cl.9.1(Accessible parts shall not be hazardous live)	-	0	-
Cl.9.1.1 ii) of Cl.9.1(Inaccessible terminals are not accessible or comply with relevant requirements)	-	0	-
Cl.9.1.1 ii) of Cl.9.1(Inaccessible terminals are not accessible or comply with relevant requirements)	-	0	-
Cl.9.1.1 iii) of Cl.9.1(For voltages >1000 V ac or >1500 V dc complies with clause 13.3.1 for basic insulation)	-	0	-
Cl.9.1.1 iii) of Cl.9.1(For voltages >1000 V ac or >1500 V dc complies with clause 13.3.1 for basic insulation)	-	0	-
Cl.9.1.1.2 of Cl.9.1.1(Determination of hazardous live parts)	-	0	-
Cl.9.1.1.2 of Cl.9.1.1(Determination of hazardous live parts)	-	0	-
Cl.9.1.1.2 a) of Cl.9.1.1(Open circuit voltages)	-	0	-
Cl.9.1.1.2 a) of Cl.9.1.1(Open circuit voltages)	-	0	-
Cl.9.1.1.2 c) of Cl.9.1.1(The charge exceeds 45 μC)	-	0	-
Cl.9.1.1.2 c) of Cl.9.1.1(The charge exceeds 45 μC)	-	0	-
Cl.9.1.1.2 d) of Cl.9.1.1(Energy of discharge not exceeding 350 mJ)	-	0	-
Cl.9.1.1.2 d) of Cl.9.1.1(Energy of discharge not exceeding 350 mJ)	-	0	-
Cl.9.1.1.3 of Cl.9.1.1(Test with test finger and test probe)	-	0	-
Cl.9.1.1.3 of Cl.9.1.1(Test with test finger and test probe)	-	0	-
Cl.9.1.2 of Cl.9.1(Shafts of operating knobs, handles, levers and the like)	-	0	-
Cl.9.1.2 of Cl.9.1(Shafts of operating knobs, handles, levers and the like)	-	0	-
Cl.9.1.3 of Cl.9.1(Openings ofthe enclosure)	-	0	-
Cl.9.1.3 of Cl.9.1(Openings ofthe enclosure)	-	0	-
Cl.9.1.4 of Cl.9.1(Terminals)	-	0	-
Cl.9.1.4 of Cl.9.1(Terminals)	-	0	-
Cl.9.1.5 of Cl.9.1(Pre-set controls)	-	0	-
Cl.9.1.5 of Cl.9.1(Pre-set controls)	-	0	-
Cl.9.1.6 of Cl.9.1(Withdrawal of the mains plug:)	-	0	-
Cl.9.1.6 of Cl.9.1(Withdrawal of the mains plug:)	-	0	-
Cl.9.1.6 i) of Cl.9.1(Withdrawal of the mains plug:)	-	0	-
Cl.9.1.6 i) of Cl.9.1(Withdrawal of the mains plug:)	-	0	-
Cl.9.1.6 ii) of Cl.9.1(Withdrawal of the mains plug:)	-	0	-
Cl.9.1.6 ii) of Cl.9.1(Withdrawal of the mains plug:)	-	0	-
Cl.9.1.6 iii) of Cl.9.1(Withdrawal of the mains plug:)	-	0	-
Cl.9.1.6 iii) of Cl.9.1(Withdrawal of the mains plug:)	-	0	-
Cl.9.1.7 of Cl.9.1(Resistance to external forces)	-	0	-
Cl.9.1.7 of Cl.9.1(Resistance to external forces)	-	0	-
Cl.9.1.7 a) of Cl.9.1(Resistance to external forces)	-	0	-
Cl.9.1.7 a) of Cl.9.1(Resistance to external forces)	-	0	-
Cl.9.1.7 b) of Cl.9.1(Resistance to external forces)	-	0	-
Cl.9.1.7 b) of Cl.9.1(Resistance to external forces)	-	0	-
Cl.9.1.7 c) of Cl.9.1(Resistance to external forces)	-	0	-
Cl.9.2 of Cl.9(Removal of protective covers)	-	0	-
Cl.9.2 of Cl.9(Removal of protective covers)	-	0	-
Cl.10.2 of Cl.10(Surge Test)	-	0	-
Cl.10.2 of Cl.10(Surge Test)	-	0	-
Cl.10.2 a) of Cl.10(Surge Test)	-	0	-
Cl.10.2 a) of Cl.10(Surge Test)	-	0	-
Cl.10.2 b) (i) of Cl.10(Surge Test)	-	0	-
Cl.10.2 b) (i) of Cl.10(Surge Test)	-	0	-
Cl.10.2 b) (ii) of Cl.10(Surge Test)	-	0	-
Cl.10.2 b) (ii) of Cl.10(Surge Test)	-	0	-
Cl.10.2 b) (iii) of Cl.10(Surge Test)	-	0	-
Cl.10.2 b) (iii) of Cl.10(Surge Test)	-	0	-
Cl.10.3 of Cl.10(Humidity treatment)	-	0	-
Cl.10.3 of Cl.10(Humidity treatment)	-	0	-
Cl.10.4 of Cl.10(Insulation resistance and dielectric strength)	-	0	-
Cl.10.4 of Cl.10(Insulation resistance and dielectric strength)	-	0	-
Cl.10.4.1 of Cl.10.4(Insulation of the insulating materials)	-	0	-
Cl.10.4.1 of Cl.10.4(Insulation of the insulating materials)	-	0	-
Cl.10.4.2 of Cl.10.4(Between parts of different polarity directly connected to the mains Between parts of different polarity directly connected to the mains)	-	0	-
Cl.10.4.2 of Cl.10.4(Between parts of different polarity directly connected to the mains Between parts of different polarity directly connected to the mains)	-	0	-
Cl.10.4.2 i) of Cl.10.4(Between parts separated by BASIC or SUPPLEMENTARY insulation)	-	0	-
Cl.10.4.2 i) of Cl.10.4(Between parts separated by BASIC or SUPPLEMENTARY insulation)	-	0	-
Cl.10.4.2 ii) of Cl.10.4(Between parts separated by REINFORCED insulation)	-	0	-
Cl.10.4.2 ii) of Cl.10.4(Between parts separated by REINFORCED insulation)	-	0	-
Cl.11.1 of Cl.11(Electric Shock Hazard)	-	0	-
Cl.11.1 of Cl.11(Electric Shock Hazard)	-	0	-
Cl.11.1 a) of Cl.11(Electric Shock Hazard)	-	0	-
Cl.11.1 a) of Cl.11(Electric Shock Hazard)	-	0	-
Cl.11.1 b) of Cl.11(Electric Shock Hazard)	-	0	-
Cl.11.1 b) of Cl.11(Electric Shock Hazard)	-	0	-
Cl.11.2 of Cl.11(Heating)	-	0	-
Cl.11.2 of Cl.11(Heating)	-	0	-
Cl.11.2.1 of Cl.11.2(Requirements)	-	0	-
Cl.11.2.1 of Cl.11.2(Requirements)	-	0	-
Cl.11.2.1 i) of Cl.11.2(No danger of fire to the surroundings)	-	0	-
Cl.11.2.1 ii) of Cl.11.2(Safety not impaired by abnormal heat)	-	0	-
Cl.11.2.1 ii) of Cl.11.2(Safety not impaired by abnormal heat)	-	0	-
Cl.11.2.1 of Cl.11.2(Flames extinguish within 10 seconds)	-	0	-
Cl.11.2.1 of Cl.11.2(Flames extinguish within 10 seconds)	-	0	-
Cl.11.2.1 of Cl.11.2(No hazard from softening solder)	-	0	-
Cl.11.2.1 of Cl.11.2(No hazard from softening solder)	-	0	-
Cl.11.2.1 of Cl.11.2(Soldered terminations not used as protective mechanism)	-	0	-
Cl.11.2.1 of Cl.11.2(Soldered terminations not used as protective mechanism)	-	0	-
Cl.11.2.2 of Cl.11.2(Measurement of temperature rises)	-	0	-
Cl.11.2.2 of Cl.11.2(Measurement of temperature rises)	-	0	-
Cl.11.2.3 of Cl.11.2(Accessible parts)	-	0	-
Cl.11.2.3 of Cl.11.2(Accessible parts)	-	0	-
Cl.11.2.4 of Cl.11.2(Parts, other than windings and printed boards, providing electrical insulation)	-	0	-
Cl.11.2.4 of Cl.11.2(Parts, other than windings and printed boards, providing electrical insulation)	-	0	-
Cl.11.2.5 of Cl.11.2(Parts acting as a support or a mechanical barrier)	-	0	-
Cl.11.2.5 of Cl.11.2(Parts acting as a support or a mechanical barrier)	-	0	-
Cl.11.2.6 of Cl.11.2(Windings )	-	0	-
Cl.11.2.6 of Cl.11.2(Windings )	-	0	-
Cl.11.2.7 of Cl.11.2(Printed boards)	-	0	-
Cl.11.2.7 of Cl.11.2(Printed boards)	-	0	-
Cl.11.2.7 i) of Cl.11.2(Printed boards)	-	0	-
Cl.11.2.7 i) a) of Cl.11.2(Printed boards)	-	0	-
Cl.11.2.7 i) a) of Cl.11.2(Printed boards)	-	0	-
Cl.11.2.7 ii) of Cl.11.2(Printed boards)	-	0	-
Cl.11.2.7 ii) of Cl.11.2(Printed boards)	-	0	-
Cl.11.2.7 iii) of Cl.11.2(Printed boards)	-	0	-
Cl.11.2.8 of Cl.11.2(Parts not subject to a limit under7.1.1 to 7.1.4)	-	0	-
Cl.11.2.8 of Cl.11.2(Parts not subject to a limit under7.1.1 to 7.1.4)	-	0	-
Cl.12.1.1 of Cl.12.1(Requirements)	-	0	-
Cl.12.1.1 of Cl.12.1(Requirements)	-	0	-
Cl.12.1.2 of Cl.12.1(Bump test )	-	0	-
Cl.12.1.2 of Cl.12.1(Bump test )	-	0	-
Cl.12.1.3 of Cl.12.1(Vibration test)	-	0	-
Cl.12.1.4 of Cl.12.1(Impact test)	-	0	-
Cl.12.1.4 of Cl.12.1(Impact test)	-	0	-
Cl.12.1.4 i) of Cl.12.1(Impact test)	-	0	-
Cl.12.1.4 i) of Cl.12.1(Impact test)	-	0	-
Cl.12.1.4 ii) of Cl.12.1(Impact test)	-	0	-
Cl.12.1.4 ii) of Cl.12.1(Impact test)	-	0	-
Cl.12.1.5 of Cl.12.1(Drop test)	-	0	-
Cl.12.1.5 of Cl.12.1(Drop test)	-	0	-
Cl.12.1.6 of Cl.12.1(Stress relief test)	-	0	-
Cl.12.1.6 of Cl.12.1(Stress relief test)	-	0	-
Cl.12.2 of Cl.12(Fixing of actuating elements)	-	0	-
Cl.12.2 of Cl.12(Fixing of actuating elements)	-	0	-
Cl.12.3 of Cl.12(Remote control devices held in hand)	-	0	-
Cl.12.4 of Cl.12(Drawers )	-	0	-
Cl.12.4 of Cl.12(Drawers )	-	0	-
Cl.12.5 of Cl.12(Antenna coaxial sockets mounted on the apparatus)	-	0	-
Cl.12.5 of Cl.12(Antenna coaxial sockets mounted on the apparatus)	-	0	-
Cl.12.5 a) of Cl.12(Endurance test,)	-	0	-
Cl.12.5 b) of Cl.12(Impact test,)	-	0	-
Cl.12.5 b) of Cl.12(Impact test,)	-	0	-
Cl.12.5 c) of Cl.12(Torque test)	-	0	-
Cl.12.6 of Cl.12(Telescoping or rod antennas)	-	0	-
Cl.12.6 of Cl.12(Telescoping or rod antennas)	-	0	-
Cl.12.6.1 of Cl.12.6(General requirements)	-	0	-
Cl.12.6.1 of Cl.12.6(General requirements)	-	0	-
Cl.12.6.1 i) of Cl.12.6(General requirements)	-	0	-
Cl.12.6.2 of Cl.12.6(Physical securement)	-	0	-
Cl.12.6.2 of Cl.12.6(Physical securement)	-	0	-
Cl.12.7 of Cl.12(Apparatus containing coin / button cell batteries)	-	0	-
Cl.12.7.1 of Cl.12.7(Coin/button cell batteries with a diameter of 32 mm or less.)	-	0	-
Cl.12.7.1 of Cl.12.7(Coin/button cell batteries with a diameter of 32 mm or less.)	-	0	-
Cl.12.7.2 of Cl.12.7(Construction requirementss)	-	0	-
Cl.12.7.3 of Cl.12.7(Tests)	-	0	-
Cl.12.7.3 of Cl.12.7(Tests)	-	0	-
Cl.12.7.3.2 of Cl.12.7.3(Stress relief test)	-	0	-
Cl.12.7.3.2 of Cl.12.7.3(Stress relief test)	-	0	-
Cl.12.7.3.3 of Cl.12.7.3(Battery replacement test)	-	0	-
Cl.12.7.3.4 of Cl.12.7.3(Drop test)	-	0	-
Cl.12.7.3.4 of Cl.12.7.3(Drop test)	-	0	-
Cl.12.7.3.5 of Cl.12.7.3(Impact test)	-	0	-
Cl.12.7.3.5 of Cl.12.7.3(Impact test)	-	0	-
Cl.12.7.3.6 of Cl.12.7.3(Crush test)	-	0	-
Cl.12.7.3.6 of Cl.12.7.3(Crush test)	-	0	-
Cl.12.7.4 of Cl.12.7(Compliance)	-	0	-
Cl.13.1 of Cl.13(General)	-	0	-
Cl.13.2 of Cl.13(Determination of Working voltage)	-	0	-
Cl.13.2 of Cl.13(Determination of Working voltage)	-	0	-
Cl.13.3 of Cl.13(Clearances)	-	0	-
Cl.13.3 of Cl.13(Clearances)	-	0	-
Cl.13.3.1 of Cl.13.3(General)	-	0	-
Cl.13.3.1 of Cl.13.3(General)	-	0	-
Cl.13.3.2 of Cl.13.3(Clearances in circuits conductively connected to the mains)	-	0	-
Cl.13.3.3 of Cl.13.3(Clearances in circuits not conductively connected to the mains)	-	0	-
Cl.13.3.3 of Cl.13.3(Clearances in circuits not conductively connected to the mains)	-	0	-
Cl.13.3.4 of Cl.13(Measurement of transient voltages)	-	5000	-
Cl.13.3.4 of Cl.13(Measurement of transient voltages)	-	5000	-
Cl.13.4 a) of Cl.13(Creepage distances )	-	0	-
Cl.13.4 b) of Cl.13(Creepage distances )	-	0	-
Cl.13.4 b) of Cl.13(Creepage distances )	-	0	-
Cl.13.4 c) of Cl.13(Creepage distances )	-	0	-
Cl.13.4 c) of Cl.13(Creepage distances )	-	0	-
Cl.13.6 a) of Cl.13(Jointed insulation )	-	0	-
Cl.13.6 a) of Cl.13(Jointed insulation )	-	0	-
Cl.13.6 b) of Cl.13(Jointed insulation )	-	0	-
Cl.13.6 c) of Cl.13(Jointed insulation )	-	0	-
Cl.13.6 c) of Cl.13(Jointed insulation )	-	0	-
Cl.13.6 d) of Cl.13(Jointed insulation )	-	0	-
Cl.13.7 of Cl.13(Enclosed and sealed parts)	-	0	-
Cl.13.7 of Cl.13(Enclosed and sealed parts)	-	0	-
Cl.13.8 of Cl.13(Parts filled with insulating compound, meeting the requirements of 8.8)	-	0	-
Cl.13.8 of Cl.13(Parts filled with insulating compound, meeting the requirements of 8.8)	-	0	-
Cl.15.1 of Cl.15(Plugs and Sockets*)	-	0	-
Cl.15.1 of Cl.15(Plugs and Sockets*)	-	0	-
Cl.15.1.1 of Cl.15.1(Plugs and Sockets*)	-	0	-
Cl.15.1.1 of Cl.15.1(Plugs and Sockets*)	-	0	-
Cl.15.1.1 i) of Cl.15.1(Plugs and Sockets*)	-	0	-
Cl.15.1.1 i) of Cl.15.1(Plugs and Sockets*)	-	0	-
Cl.15.1.2 of Cl.15.1(Design of connectors other than for mains power *)	-	0	-
Cl.15.1.2 of Cl.15.1(Design of connectors other than for mains power *)	-	0	-
Cl.15.1.2 i) of Cl.15.1(Design of sockets with symbol of 5.3 b) design *)	-	0	-
Cl.15.1.2 i) of Cl.15.1(Design of sockets with symbol of 5.3 b) design *)	-	0	-
Cl.15.1.3 of Cl.15.1(Design of terminals and connectors used in output circuits of supply apparatus*)	-	0	-
Cl.15.1.3 of Cl.15.1(Design of terminals and connectors used in output circuits of supply apparatus*)	-	0	-
Cl.15.2 of Cl.15(Provisions for protective earthing)	-	0	-
Cl.15.2 of Cl.15(Provisions for protective earthing)	-	0	-
Cl.15.2 i) of Cl.15(Provisions for protective earthing)	-	0	-
Cl.15.2 i) of Cl.15(Provisions for protective earthing)	-	0	-
Cl.15.2 ii) of Cl.15(Provisions for protective earthing)	-	0	-
Cl.15.2 ii) of Cl.15(Provisions for protective earthing)	-	0	-
Cl.15.2 iii) of Cl.15(Provisions for protective earthing)	-	0	-
Cl.15.2 iii) of Cl.15(Provisions for protective earthing)	-	0	-
Cl.15.2 iv) of Cl.15(Provisions for protective earthing)	-	0	-
Cl.15.2 iv) of Cl.15(Provisions for protective earthing)	-	0	-
Cl.15.2 v) of Cl.15(Provisions for protective earthing)	-	0	-
Cl.15.3 of Cl.15(Terminals for external flexible cords and for permanent connection to the mains supply*)	-	0	-
Cl.15.3 of Cl.15(Terminals for external flexible cords and for permanent connection to the mains supply*)	-	0	-
Cl.15.3.1 of Cl.15.3(Adequate terminals for connection of permanent wiring*)	-	0	-
Cl.15.3.2 of Cl.15.3(Reliable connection of non-detachable cords)	-	0	-
Cl.15.3.2 of Cl.15.3(Reliable connection of non-detachable cords)	-	0	-
Cl.15.3.2 i) of Cl.15.3(Not soldered to conductors of a printed circuit board)	-	0	-
Cl.15.3.2 i) of Cl.15.3(Not soldered to conductors of a printed circuit board)	-	0	-
Cl.15.3.2 ii) of Cl.15.3(Adequate clearances and creepage distances between connections should a wire break away)	-	0	-
Cl.15.3.2 ii) of Cl.15.3(Adequate clearances and creepage distances between connections should a wire break away)	-	0	-
Cl.15.3.2 iii) of Cl.15.3(Wire secured by additional means to the conductor)	-	0	-
Cl.15.3.2 iii) of Cl.15.3(Wire secured by additional means to the conductor)	-	0	-
Cl.15.3.3 of Cl.15.3(Screws and nuts clamping conductors have adequate threads: ISO 261, ISO 262 or similar*)	-	0	-
Cl.15.3.3 of Cl.15.3(Screws and nuts clamping conductors have adequate threads: ISO 261, ISO 262 or similar*)	-	0	-
Cl.15.3.4 of Cl.15.3(Conductors adequately fixed (two independent fixings) *)	-	0	-
Cl.15.3.4 of Cl.15.3(Conductors adequately fixed (two independent fixings) *)	-	0	-
Cl.15.3.5 of Cl.15.3(Terminals allow connection of conductors having appropriate cross-sectional area)	-	0	-
Cl.15.3.5 of Cl.15.3(Terminals allow connection of conductors having appropriate cross-sectional area)	-	0	-
Cl.15.3.6 of Cl.15.3(Terminals to 15.3.3 have sizes required by table 16)	-	0	-
Cl.15.3.6 of Cl.15.3(Terminals to 15.3.3 have sizes required by table 16)	-	0	-
Cl.15.3.7 of Cl.15.3(Terminals clamp conductors between metal and have adequate pressure)	-	0	-
Cl.15.3.7 of Cl.15.3(Terminals clamp conductors between metal and have adequate pressure)	-	0	-
Cl.15.3.7 i) of Cl.15.3(Terminals designed to avoid conductor slipping out when tightened)	-	0	-
Cl.15.3.7 i) of Cl.15.3(Terminals designed to avoid conductor slipping out when tightened)	-	0	-
Cl.15.3.7 ii) of Cl.15.3(Terminals adequately fixed when tightened or loosened (no loosening, wiring not stressed, distances not reduced))	-	0	-
Cl.15.3.8 of Cl.15.3(Terminals carrying a current more than)	-	0	-
Cl.15.3.8 of Cl.15.3(Terminals carrying a current more than)	-	0	-
Cl.15.3.8 i) of Cl.15.3(0.2 A, contact pressure not transmitted by insulating material except ceramic*)	-	0	-
Cl.15.3.9 of Cl.15.3(Termination of non-detachable cords: wires terminated near to each other)	-	0	-
Cl.15.3.9 of Cl.15.3(Termination of non-detachable cords: wires terminated near to each other)	-	0	-
Cl.15.3.9 i) of Cl.15.3(Terminals located and shielded: test with 8 mm strand)	-	0	-
Cl.15.4 of Cl.15(Devices forming a part of the mains plug*)	-	0	-
Cl.15.4 of Cl.15(Devices forming a part of the mains plug*)	-	0	-
Cl.15.4.1 of Cl.15.4(No undue strain on mains socket-outlets.)	-	0	-
Cl.15.4.1 i) of Cl.15.4(Device shall be tested on the equipment as per Fig.11: Torque to be applied : 0.25 Nm (Max))	-	0	-
Cl.15.4.2 of Cl.15.4(Device complies with standard for dimensions of mains plugs)	-	0	-
Cl.15.4.3 of Cl.15.4(Device has adequate mechanical strength (tests a,b,c))	-	0	-
Cl.16.1 a) of Cl.16(Mains supply flexible cords shall be sheathed type, complying with IEC 60227 for PVC cords or as per IEC 60245 for synthetic rubber cords)	-	0	-
Cl.16.1 b) of Cl.16(Non-detachable cords for Class I have green/yellow core for protective earth)	-	0	-
Cl.16.2 of Cl.16(Mains cords conductors shall have a nominal cross-sectional area not less than the values given in Table 18, for rated current consumption of the apparatus)	-	0	-
Cl.16.2 of Cl.16(Mains cords conductors shall have a nominal cross-sectional area not less than the values given in Table 18, for rated current consumption of the apparatus)	-	0	-
Cl.16.3 a) of Cl.16(Flexiblecordsnotcomplyingwith16.1, used for interconnections between separate units of equipment used in combination and carrying hazardous live voltages, have adequate dielectric strength as perCl.10.3)	-	0	-
Cl.16.3 a) of Cl.16(Flexiblecordsnotcomplyingwith16.1, used for interconnections between separate units of equipment used in combination and carrying hazardous live voltages, have adequate dielectric strength as perCl.10.3)	-	0	-
Cl.16.4 of Cl.16(Flexible cords used for connection between equipment have adequate cross-sectional areas to avoid temperature rise under normal and fault conditions)	-	0	-
Cl.16.4 of Cl.16(Flexible cords used for connection between equipment have adequate cross-sectional areas to avoid temperature rise under normal and fault conditions)	-	0	-
Cl.16.5 a) of Cl.16(Adequate strain relief on external flexible cords)	-	0	-
Cl.16.5 a) of Cl.16(Adequate strain relief on external flexible cords)	-	0	-
Cl.16.5 b) of Cl.16(Not possible to push cord back into equipment)	-	0	-
Cl.16.5 b) of Cl.16(Not possible to push cord back into equipment)	-	0	-
Cl.16.5 c) of Cl.16(Strain relief device unlikely to damage flexible cord)	-	0	-
Cl.16.5 c) of Cl.16(Strain relief device unlikely to damage flexible cord)	-	0	-
Cl.16.5 d) of Cl.16(For mains cords of Class I equipment, hazardous live conductors become taut before earth conductor)	-	0	-
Cl.16.5 d) of Cl.16(For mains cords of Class I equipment, hazardous live conductors become taut before earth conductor)	-	0	-
Cl.16.6 of Cl.16(Apertures for external flexible cord: no risk of damage to the cord during assembly or movement in use)	-	0	-
Cl.16.6 of Cl.16(Apertures for external flexible cord: no risk of damage to the cord during assembly or movement in use)	-	0	-
Cl.16.7 a) of Cl.16(Transportable apparatus fitted with detachable cord sets with appliance inlet as perIEC60320-1 or)	-	0	-
Cl.16.7 a) of Cl.16(Transportable apparatus fitted with detachable cord sets with appliance inlet as perIEC60320-1 or)	-	0	-
Cl.16.7 b) of Cl.16(Transportable apparatus shall have a means of stowage to protect the cord)	-	0	-
Cl.16.7 b) of Cl.16(Transportable apparatus shall have a means of stowage to protect the cord)	-	0	-
17.1 a) of Cl.17(Screws are loosened and then tightened with a torque according to table20)	-	0	-
17.1 a) of Cl.17(Screws are loosened and then tightened with a torque according to table20)	-	0	-
Cl.17.1 b) of Cl.17(5 times in the case of screws operating in a thread of metal)	-	0	-
Cl.17.1 b) of Cl.17(5 times in the case of screws operating in a thread of metal)	-	0	-
Cl.17.1 c) of Cl.17(10 times in the case of screws operating in wood or in a thread in insulating material:)	-	0	-
Cl.17.1 c) of Cl.17(10 times in the case of screws operating in wood or in a thread in insulating material:)	-	0	-
Cl.17.2 of Cl.17(Correct introduction of screws into female threads in non-metallic material)	-	0	-
Cl.17.2 of Cl.17(Correct introduction of screws into female threads in non-metallic material)	-	0	-
Cl.17.3 a) of Cl.17(Screws or other fixing devices intended to fix Covers, legs, stands or the like, shall be captive in order to prevent replacement during servicing by screws or other fixing devices……)	-	0	-
Cl.17.3 a) of Cl.17(Screws or other fixing devices intended to fix Covers, legs, stands or the like, shall be captive in order to prevent replacement during servicing by screws or other fixing devices……)	-	0	-
Cl.17.3 b) of Cl.17(Non-captive fixing screws: no hazard when replaced by a screw whose length is 10 times its diameter)	-	0	-
Cl.17.3 b) of Cl.17(Non-captive fixing screws: no hazard when replaced by a screw whose length is 10 times its diameter)	-	0	-
Cl.17.4 of Cl.17(No loosening of conductive parts carrying a current > 0.2 A)	-	0	-
Cl.17.4 of Cl.17(No loosening of conductive parts carrying a current > 0.2 A)	-	0	-
Cl.17.5 of Cl.17(Contact pressure not transmitted through plastic other than ceramic for connections carrying a current > 0.2 A*)	-	0	-
Cl.17.5 of Cl.17(Contact pressure not transmitted through plastic other than ceramic for connections carrying a current > 0.2 A*)	-	0	-
Cl.17.6 of Cl.17(Stranded conductors of flexible supply cords carrying a current > 0.2 A with screw terminals not consolidated by solder *)	-	0	-
Cl.17.7 of Cl.17(Cover fixing devices other than screws have adequate strength and their positioning is unambiguous)	-	0	-
Cl.17.7 of Cl.17(Cover fixing devices other than screws have adequate strength and their positioning is unambiguous)	-	0	-
Cl.17.8 of Cl.17(Detachable legs or stands supplied by the manufacturer of the apparatus shall be delivered with the relevant fixing means *)	-	0	-
Cl.17.8 of Cl.17(Detachable legs or stands supplied by the manufacturer of the apparatus shall be delivered with the relevant fixing means *)	-	0	-
Cl.17.9 a) of Cl.17(Internal pluggable connections, affecting safety, unlikely to become disconnected)	-	0	-
Cl.17.9 a) of Cl.17(Internal pluggable connections, affecting safety, unlikely to become disconnected)	-	0	-
Cl.17.9 b) of Cl.17(By applying a 2N pull force in any direction to the connection, in case of doubt)	-	0	-
Cl.17.9 b) of Cl.17(By applying a 2N pull force in any direction to the connection, in case of doubt)	-	0	-
Cl.19.1 of Cl.19(Stability and mechanical hazards)	-	0	-
Cl.19.1 of Cl.19(Stability and mechanical hazards)	-	0	-
Cl.19.1 of Cl.19(Stability requirements)	-	0	-
Cl.19.1 of Cl.19(Stability requirements)	-	0	-
Cl.19.1 i) of Cl.19(Stability requirements)	-	0	-
Cl.19.1 i) of Cl.19(Stability requirements)	-	0	-
Cl.19.2 of Cl.19(Test at 10° to the horizontal)	-	0	-
Cl.19.2 of Cl.19(Test at 10° to the horizontal)	-	0	-
Cl.19.3 of Cl.19(Vertical force test )	-	0	-
Cl.19.3 of Cl.19(Vertical force test )	-	0	-
Cl.19.4 of Cl.19(Horizontal force test)	-	0	-
Cl.19.4 of Cl.19(Horizontal force test)	-	0	-
Cl.19.5 of Cl.19(Test of edges and corners)	-	0	-
Cl.19.5 of Cl.19(Test of edges and corners)	-	0	-
Cl.19.6 of Cl.19(Mechanical strength of glass)	-	0	-
Cl.19.6 of Cl.19(Mechanical strength of glass)	-	0	-
Cl.19.6.1 of Cl.19.6(Requirements)	-	0	-
Cl.19.6.1 of Cl.19.6(Requirements)	-	0	-
Cl.19.6.2 of Cl.19.6(Fragmentation test)	-	0	-
Cl.19.6.2 of Cl.19.6(Fragmentation test)	-	0	-
Cl.19.7 of Cl.19(Wall or ceiling mounting means)	-	0	-
Cl.19.7 of Cl.19(Wall or ceiling mounting means)	-	0	-
Cl.19.7.1 of Cl.19..7(Requirements)	-	0	-
Cl.19.7.1 of Cl.19..7(Requirements)	-	0	-
Cl.19.7.3 of Cl.19.7(Compliance)	-	0	-
Cl.19.7.3 of Cl.19.7(Compliance)	-	0	-
Cl.20.1 of Cl.20(Requirements)	-	0	-
Cl.20.1 of Cl.20(Requirements)	-	0	-
Cl.20.2 of Cl.20(Electrical components and mechanical parts)	-	0	-
Cl.20.2 of Cl.20(Electrical components and mechanical parts)	-	0	-
Cl.20.2.1 a) of Cl.20.2(Exemption for components contained in an enclosure of material V-0 to IEC60695- 11-10 with openings not exceeding 1 mm in width)	-	0	-
Cl.20.2.1 a) of Cl.20.2(Exemption for components contained in an enclosure of material V-0 to IEC60695- 11-10 with openings not exceeding 1 mm in width)	-	0	-
Cl.20.2.1 b) of Cl.20.2(Exemption for small components)	-	0	-
Cl.20.2.1 b) of Cl.20.2(Exemption for small components)	-	0	-
Cl.20.2.2 of Cl.20.2(Electrical components )	-	0	-
Cl.20.2.2 of Cl.20.2(Electrical components )	-	0	-
Cl.20.2.3 of Cl.20.2(Internal wiring)	-	0	-
Cl.20.2.4 of Cl.20.2(Printed boards)	-	0	-
Cl.20.2.4 of Cl.20.2(Printed boards)	-	0	-
Cl.20.2.4 i) of Cl.20.2(Printed boards)	-	0	-
Cl.20.2.4 i) of Cl.20.2(Printed boards)	-	0	-
Cl.20.2.5 of Cl.20.2(Components and parts not covered by 20.2.2, 20.2.3 and 20.2.4)	-	0	-
Cl.20.2.5 of Cl.20.2(Components and parts not covered by 20.2.2, 20.2.3 and 20.2.4)	-	0	-
Cl.20.2.5 i) of Cl.20.2(Components and parts not covered by 20.2.2, 20.2.3 and 20.2.4)	-	0	-
Cl.20.2.5 i) of Cl.20.2(Components and parts not covered by 20.2.2, 20.2.3 and 20.2.4)	-	0	-
Cl.20.2.5 ii) of Cl.20.2(Components and parts not covered by 20.2.2, 20.2.3 and 20.2.4)	-	0	-
Cl.20.2.5 ii) of Cl.20.2(Components and parts not covered by 20.2.2, 20.2.3 and 20.2.4)	-	0	-
Cl.20.3 of Cl.20(Fire enclosure*)	-	0	-
Cl.20.3 of Cl.20(Fire enclosure*)	-	0	-
Cl.20.3.1 of Cl.20.3(Fire enclosure*)	-	0	-
Cl.20.3.1 of Cl.20.3(Fire enclosure*)	-	0	-
Cl.20.3.2 of Cl.20.3(Fire enclosure*)	-	0	-
Cl.20.3.2 of Cl.20.3(Fire enclosure*)	-	0	-
Cl.20.3.3 of Cl.20.3(Fire enclosure*)	-	0	-
Cl.5.2 h)-i) of Cl.5(appliance coupler for Class I is used for Class II equipment with functional earth connection, the requirements of Clause 15 and Clause 16 related to Class I construction shall be applied up to the connecting point of the protective(earthing) conductor to the functional earth.)	-	0	-
Cl.5.2 h)-i) of Cl.5(appliance coupler for Class I is used for Class II equipment with functional earth connection, the requirements of Clause 15 and Clause 16 related to Class I construction shall be applied up to the connecting point of the protective(earthing) conductor to the functional earth.)	-	0	-
Cl.5.5 of Cl.5(Instructions)	-	0	-
Cl.5.5 of Cl.5(Instructions)	-	0	-
Cl.5.5 of Cl.5(Instructions)	-	0	-
Cl.5.5 of Cl.5(Instructions)	-	0	-
Cl.5.5.1 of Cl.5.5(Safety relevant information)	-	0	-
Cl.5.5.1 of Cl.5.5(Safety relevant information)	-	0	-
Cl.5.5.2 a) of Cl.5.5(Mains powered equipment not exposed to dripping or splashing. Warning concerning objects filled with liquid, etc.)	-	0	-
Cl.5.5.2 a) of Cl.5.5(Mains powered equipment not exposed to dripping or splashing. Warning concerning objects filled with liquid, etc.)	-	0	-
Cl.5.5.2 b) of Cl.5.5(Hazardous live terminals, instructions for wiring)	-	0	-
Cl.5.5.2 b) of Cl.5.5(Hazardous live terminals, instructions for wiring)	-	0	-
Cl.11.2.7 i) b) of Cl.11.2(Printed boards)	-	0	-
Cl.11.2.7 i) b) of Cl.11.2(Printed boards)	-	0	-
Cl.9.1.4 i) of Cl.9.1(Terminals)	-	0	-
Cl.9.1.4 i) of Cl.9.1(Terminals)	-	0	-
Cl.9.1.4 ii) of Cl.9.1(Terminals)	-	0	-
Cl.9.1.4 ii) of Cl.9.1(Terminals)	-	0	-
Cl.10.2 b) of Cl.10(Surge Test)	-	0	-
Cl.10.2 b) of Cl.10(Surge Test)	-	0	-
Cl.8.11 i) of Cl.8(Noun due reduction of creepage or clearance distances if wires become detached)	-	0	-
Cl.8.11 i) of Cl.8(Noun due reduction of creepage or clearance distances if wires become detached)	-	0	-
Cl.8.11 ii) of Cl.8(Vibration test carried out)	-	0	-
Cl.8.11 ii) of Cl.8(Vibration test carried out)	-	0	-
Cl.5.5.2 c) of Cl.5.5(Instructions for replacing lithium battery)	-	0	-
Cl.5.5.2 c) of Cl.5.5(Instructions for replacing lithium battery)	-	0	-
Cl.5.5.2 d) of Cl.5.5(Class I earth connection warning)	-	0	-
Cl.5.5.2 d) of Cl.5.5(Class I earth connection warning)	-	0	-
Cl.5.5.2 e) of Cl.5.5(Instructions for multimedia system connection)	-	0	-
Cl.5.5.2 e) of Cl.5.5(Instructions for multimedia system connection)	-	0	-
Cl.5.5.2 f) of Cl.5.5(Special stability warning for attachment of the apparatus to the floor/wall)	-	0	-
Cl.5.5.2 g) of Cl.5.5(Warning: battery exposure to heat)	-	0	-
Cl.5.5.2 g) of Cl.5.5(Warning: battery exposure to heat)	-	0	-
Cl.5.5.2 h) of Cl.5.5(Warning: protective film on CRT face)	-	0	-
Cl.5.5.2 i) of Cl.5.5("Warning: Non-floor standing TV >7kg")	-	0	-
Cl.5.5.2 j) of Cl.5.5("Warning: User replaceable coin / button cell battery")	-	0	-
Cl.5.5.2 j) of Cl.5.5("Warning: User replaceable coin / button cell battery")	-	0	-
Cl.5.5.3 (a-b) of Cl.5.5(Disconnect device: plug/coupler or all-pole mains switch location, accessibility and markings)	-	0	-
Cl.5.5.3 (a-b) of Cl.5.5(Disconnect device: plug/coupler or all-pole mains switch location, accessibility and markings)	-	0	-
Cl.5.5.3 c) of Cl.5.5(Instructions for permanently connected equipment)	-	0	-
Cl.5.5.3 c) of Cl.5.5(Instructions for permanently connected equipment)	-	0	-
Cl.5.5.3 c) i) of Cl.5.5(Marking, signal lamps or similar for completely disconnection from the mains)	-	0	-
Touch current measured from terminal devices using the network in annex D(Touch current measured from terminal devices using the network in annex D)	-	3000	-
Touch current measured from terminal devices using the network in annex D(Touch current measured from terminal devices using the network in annex D)	-	3000	-
Cl.15.1.1 ii) of Cl.15.1(Plugs and Sockets*)	-	0	-

03 Dec, 2026

-
Exclusion: Hazardous radiation test (Cl.6), Components (Cl.14), Mechanical strength of picture tubes and protection against the effects of implosion (Cl.18), Annex L: Additional requirements for electronic flash apparatus for photographic purposes, Plugs & Sockets (Cl.15.1), External flexible chords (Cl.16.1, 16.3, 16.6), insulated winding wires for use without additional interleaved insulation (Cl.8.16 & Annex H), Components complying with requiremetns of 14.45.3 (Cl.8.7)

7962

HT Product Services Private Limited, Noida

8175006

IS 15885 : Part 2 : Sec 13 (2012)

Safety of lamp controlgear: Part 2 particular requirements: Sec 13 d.c. or a.c. supplied electronic controlgear for led modules

for AC and DC up to 1000 V

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	1000	-
8(Protection against accidental contact with live parts)	-	2000	-
9(Terminals)	-	2000	-
10(PROVISION FOR EARTHING)	-	2000	-
11(MOISTURE RESISTANCE)	-	5000	-
12(Electric Strength)	-	2000	-
13(Thermal endurance test for winding of ballasts)	-	3000	-
14(Fault conditions)	-	3000	-
15(Transformer heating)	-	2000	-
16(Construction)	-	2000	-
17(Creepage distance and clearances)	-	2000	-
18(Screws, current carrying parts and connections)	-	1000	-
19(Resistance to heat, fire and tracking)	-	2000	-
20(Resistance to corrosion)	-	1000	-
16(Enclosures)	-	1000	-
16(Bridging resistor in primary circuit)	-	1000	-
16(Capacitor and RC units)	-	1000	-
16(RF suppression (X-Y capacitors))	-	2000	-
16(Inductor)	-	0	-
16(MOV/VDR)	-	0	-
16(SMPS/Mains Transformer)	-	0	-
16(PCB material)	-	0	-
19(Metal base PCB for LED)	-	0	-
19(Transparent cover)	-	0	-
19(Bobbin)	-	0	-
16(Insulated tape)	-	0	-
16(Heat shrinkage sleeve)	-	0	-
19(Terminals)	-	0	-
16(Connector)	-	0	-
16(Fuse)	-	0	-
16(Internal wire)	-	0	-
16(LED)	-	0	-
16(Opto-coupler)	-	0	-
16(Opto-coupler)	-	0	-
16(EMI/EMC filter)	-	0	-
16(Winding wire)	-	0	-
16(Thin sheet materials)	-	0	-
7(Marking)	-	0	-
8("PROTECTION AGAINST ACCIDENTAL CONTACT WITH LIVE PARTS")	-	0	-
9(TERMINALS)	-	0	-
10(PROVISIONS FOR PROTECTIVE EARTHING)	-	0	-
11(MOISTURE RESISTANCE AND INSULATION)	-	0	-
12(ELECTRIC STRENGTH)	-	0	-
14(FAULT CONDITIONS)	-	0	-
15(TRANSFORMER HEATING)	-	0	-
16(CONSTRUCTION)	-	0	-
17(CREEPAGE DISTANCES AND CLEARANCES)	-	0	-
18("SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS")	-	0	-
19(RESISTANCE TO HEAT, FIRE AND TRACKING)	-	0	-
20(RESISTANCE TO CORROSION)	-	0	-
4(GENERAL REQUIREMENTS)	-	0	-
5(GENERAL NOTES ON TESTS)	-	0	-
6(CLASSIFICATION)	-	0	-

03 Dec, 2026

-
-

7963

ABB ELSP LAB, Bengaluru

6184126

IS/IEC 60947 : Part 5 : Sec 1 (2009)

Low - Voltage switchgear and controlgear: Part 5 control circuit devices and switching elements: Sec 1 electromechanical control circuit devices (First Revision)

133204 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.3.3.5.2( Making and breaking capacities of switching elements under normal conditions)	-	20000	only AC-15 & DC-13 available
8.3.3.5.5 b)( Dielectric verification)	-	11068	-
8.3.3.2(Operating limits of contactor relays )	-	20000	-
8.3.3.3(Temperature rise )	-	20000	-
8.3.3.4(Dielectric properties)	-	11068	-
8.2.4 of IS/IEC 60947-1(Mechanical properties of Terminal)	-	20000	-
8.3.3.5.3(– Making and breaking capacities of switching elements under abnormal conditions )	-	20000	-
8.3.3.5.5 b)(Dielectric verification)	-	11068	-

05 Mar, 2028

-
Restricted only for Sequence IV, V & VI.

7964

BIS, Patna Branch Laboratory (PBL)

None

IS 2344 (2022)

Flake type chewing tobacco zarda - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Description-2344)	-
4.1 (Silver foil-IS 3110)	-
4.2.2 (Additives (a)Benzoic Acid -IS 12014)	-
4.2.2 (Additives (b)Sorbic Acid-IS 12014)	-
4.3, 8.1 and A-4 Table 1 (i) (Oven Moisture- IS 5643)	-
4.3, 8.1 and A-4 Table 1 (ii) (Total Alkaloids as Nicotine(ODB)-IS 5643/IS 16132/16832)	-
4.3, 8.1 and A-4 Table 1 (iii) (Total ash(ODB)-IS 5643)	-
4.3, 8.1 and A-4 Table 1 (iv) (Silicated residue insoluble in hydrochloric Acid(ODB)-IS 16236)	-

-
All test facilities are available as per the IS

7965

Anacon Laboratories Pvt. Ltd, Nagpur

7124116

IS 13428 (2024)

PACKAGED NATURAL MINERAL WATER - SPECIFICATION Third Revision

13800.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl- 6.3, Annex N (i)(P,P -DDE)	-	1250.00	total cost for oganochlorine pesticide
Cl- 6.3, Annex N (i)(O,P -DDE)	-	1250.00	total cost for oganochlorine pesticide
Cl- 6.3, Annex N (i)(P,P- DDT)	-	1250.00	total cost for oganochlorine pesticide
Cl- 6.3, Annex N (i)(O,P -DDT)	-	1250.00	total cost for oganochlorine pesticide
Cl-6.3, Annex N (i)(P,P- DDD)	-	1250.00	total cost for oganochlorine pesticide
Cl-6.3, Annex N (i)(O,P-DDD)	-	1250.00	total cost for oganochlorine pesticide
Cl- 6.3, Annex N (ii)(γ-HCH (lindane))	-	1250.00	total cost for oganochlorine pesticide
Cl- 6.3, Annex N (iii)(α-HCH)	-	1250.00	total cost for oganochlorine pesticide
Cl- 6.3, Annex N (iii)(β-HCH)	-	1250.00	total cost for oganochlorine pesticide
Cl- 6.3, Annex N (iii)(δ - HCH)	-	1250.00	total cost for oganochlorine pesticide
Cl- 6.3, Annex N (iv)(Endosulfan - α)	-	1250.00	total cost for oganochlorine pesticide
Cl- 6.3, Annex N (iv)(Endosulfan - β)	-	1250.00	total cost for oganochlorine pesticide
Cl- 6.3, Annex N (iv)(Endosulfan - sulphate)	-	1250.00	total cost for oganochlorine pesticide
Cl- 6.3, Annex N (v)(Monocrotophos)	-	1250.00	total cost for ogano-phosphorus pesticide
Cl- 6.3, Annex N (vi)(Ethion)	-	1250.00	total cost for ogano-phosphorus pesticide
Cl- 6.3, Annex N (vii)(Chlorpyrifos)	-	1250.00	total cost for ogano-phosphorus pesticide
Cl- 6.3, Annex N (viii)(Phorate and its oxygen analogue)	-	1250.00	total cost for ogano-phosphorus pesticide
Cl- 6.3, Annex N (viii)(phorate sulphoxide)	-	1250.00	total cost for ogano-phosphorus pesticide
Cl- 6.3, Annex N (viii)(phorate sulphone)	-	1250.00	total cost for ogano-phosphorus pesticide
Cl- 6.3, Annex N (ix)(2,4-D)	-	1250.00	total cost for ogano-phosphorus pesticide
Cl- 6.3, Annex N (x)(Butachlor)	-	1250.00	total cost for ogano-phosphorus pesticide
Cl- 6.3, Annex N (xi)(Isoproturon)	-	1250.00	total cost for ogano-phosphorus pesticide
Cl- 6.3, Annex N (xii)(Alachlor)	-	1250.00	total cost for ogano-phosphorus pesticide
Cl- 6.3, Annex N (xiii)(Atrazine)	-	1250.00	total cost for ogano-phosphorus pesticide
Cl- 6.3, Annex N (xiv)(Methyl parathion)	-	1250.00	total cost for ogano-phosphorus pesticide
Cl- 6.3, Annex N (xiv)(Methyl paraoxon)	-	1250.00	total cost for ogano-phosphorus pesticide
Cl- 6.3, Annex N (xv)(Malathion)	-	1250.00	total cost for ogano-phosphorus pesticide
Cl- 6.3, Annex N (xv)(malaoxon)	-	1250.00	total cost for ogano-phosphorus pesticide
Cl- 6.3, Annex N (xvi)(Aldrin)	-	1250.00	total cost for ogano-phosphorus pesticide
6.2/Table 2/xviii(Mineral Oil)	-	1300.00	-
Cl-6.3, Annex N (XVI)(Dieldrin)	-	1250.00	total cost for ogano-phosphorus pesticide
6.2/Table 3/ix(Polynuclear aromatic hydrocarbons)	-	1500.00	-
6.2/Table 3/viii(Polychlorinated biphenyle (PCB))	-	1500.00	-
6.1.1(Escherichia coli)	-	250.00	-
6.1.2(Coliform)	-	275.00	-
6.1.3(Faecal Streptococci)	-	275.00	-
Cl-6.1.3(Staphylococcus aureus)	-	275.00	-
6.1.4(Sulphite Reducing Anaerobe)	-	275.00	-
6.1.5(Pseudomonas aeruginosa)	-	275.00	-
6.1.6(Yeast and moould)	-	275.00	-
6.1.7(Salmonella)	-	275.00	-
Cl-6.1.7(Shigella)	-	275.00	-
6.1.8(Vibrio Cholera)	-	275.00	-
Cl-6.1.8(V. parahaemolyticus)	-	275.00	-
6.2/Table 2/v(Copper)	-	60.00	-
6.2/Table 2/vii(Barium)	-	60.00	-
6.2/Table 2/viii(Antimony)	-	60.00	-
6.2/Table 2/ix(Borate)	-	60.00	-
6.2/Table 2/x(Silver)	-	60.00	-
6.2/Table 2/xvii(Selenium)	-	60.00	-
6.2/Table 3/i(Arsenic)	-	60.00	-
6.2/Table 3/ii(Cadmium)	-	60.00	-
6.2/Table 3/iv(Chromium)	-	60.00	-
6.2/Table 3/v(Mercury)	-	60.00	-
6.2/Table 3/vi(Lead)	-	60.00	-
6.2/Table 3/vii(Nickel)	-	60.00	-
6.2/Table 3/x(Uranium)	-	1800.00	-
6.2/Table 1/i(Colour)	-	60.00	-
6.2/Table 1/ii(Odour)	-	60.00	-
6.2/Table 1/iii(Taste)	-	60.00	-
6.2/Table 1/iv(Turbidity)	-	60.00	-
6.2/Table 1/v(Total Dissoved)	-	60.00	-
6.2/Table 1/vi(pH Value)	-	60.00	-
6.2/Table 2/i(Nitrate)	-	60.00	-
6.2/Table 2/ii(Nitrite)	-	60.00	-
6.2/Table 2/iii(Sulphide)	-	60.00	-
6.2/Table 2/vi(Fluoride)	-	60.00	-
6.2/Table 2/xi(Chloride)	-	60.00	-
6.2/Table 2/xii(Sulphate)	-	60.00	-
6.2/Table 2/xiii(Magnesium)	-	60.00	-
6.2/Table 2/xiv(Calcium)	-	60.00	-
6.2/Table 2/xv(Sodium)	-	60.00	-
6.2/Table 2/xvi(Alkalinity)	-	60.00	-
6.2/Table 2/xix(Phenolic Compounds)	-	200.00	-
6.2/Table 2/xx(Anionic Surface active agents)	-	140.00	-
6.2/Table 3/iii(Cyanide)	-	60.00	-
6.2/Table 2/iv(Manganese)	-	60.00	-
Cl- 6.3, Annex N (i)(P,P -DDE)	-	1250.00	Total cost of Organochlorine pesticide
Cl- 6.3, Annex N (i)(O,P -DDE)	-	1250.00	Total cost of Organochlorine pesticide
Cl- 6.3, Annex N (i)(P,P- DDT)	-	1250.00	Total cost of Organochlorine pesticide
Cl- 6.3, Annex N (i)(O,P -DDT)	-	1250.00	Total cost of Organochlorine pesticide
Cl-6.3, Annex N (i)(P,P- DDD)	-	1250.00	Total cost of Organochlorine pesticide
Cl-6.3, Annex N (i)(O,P-DDD)	-	1250.00	Total cost of Organochlorine pesticide
Cl- 6.3, Annex N (ii)(γ-HCH (lindane))	-	1250.00	Total cost of Organochlorine pesticide
Cl- 6.3, Annex N (iii)(α-HCH)	-	1250.00	Total cost of Organochlorine pesticide
Cl- 6.3, Annex N (iii)(β-HCH)	-	1250.00	Total cost of Organochlorine pesticide
Cl- 6.3, Annex N (iii)(δ - HCH)	-	1250.00	Total cost of Organochlorine pesticide
Cl- 6.3, Annex N (iv)(Endosulfan - α)	-	1250.00	Total cost of Organochlorine pesticide
Cl- 6.3, Annex N (iv)(Endosulfan - β)	-	1250.00	Total cost of Organochlorine pesticide
Cl- 6.3, Annex N (iv)(Endosulfan - sulphate)	-	1250.00	Total cost of Organochlorine pesticide
Cl- 6.3, Annex N (v)(Monocrotophos)	-	1250.00	Total cost of Organophos pesticide
Cl- 6.3, Annex N (vi)(Ethion)	-	1250.00	Total cost of Organophos pesticide
Cl- 6.3, Annex N (vii)(Chlorpyrifos)	-	1250.00	Total cost of Organophos pesticide
Cl- 6.3, Annex N (viii)(Phorate and its oxygen analogue)	-	1250.00	Total cost of Organophos pesticide
Cl- 6.3, Annex N (viii)(phorate sulphoxide)	-	1250.00	Total cost of Organophos pesticide
Cl- 6.3, Annex N (viii)(phorate sulphone)	-	1250.00	Total cost of Organophos pesticide
Cl- 6.3, Annex N (ix)(2,4-D)	-	1250.00	Total cost of Organophos pesticide
Cl- 6.3, Annex N (x)(Butachlor)	-	1250.00	Total cost of Organophos pesticide
Cl- 6.3, Annex N (xi)(Isoproturon)	-	1250.00	Total cost of Organophos pesticide
Cl- 6.3, Annex N (xii)(Alachlor)	-	1250.00	Total cost of Organophos pesticide
Cl- 6.3, Annex N (xiii)(Atrazine)	-	1250.00	Total cost of Organophos pesticide
Cl- 6.3, Annex N (xiv)(Methyl parathion)	-	1250.00	Total cost of Organophos pesticide
Cl- 6.3, Annex N (xiv)(Methyl paraoxon)	-	1250.00	Total cost of Organophos pesticide
Cl- 6.3, Annex N (xv)(Malathion)	-	1250.00	Total cost of Organophos pesticide
Cl- 6.3, Annex N (xv)(malaoxon)	-	1250.00	Total cost of Organophos pesticide
Cl- 6.3, Annex N (xvi)(Aldrin)	-	1250.00	Total cost of Organophos pesticide
6.2/Table 2/xviii(Mineral Oil)	-	1300.00	-
Cl-6.3, Annex N (XVI)(Dieldrin)	-	1250.00	Total cost of Organophos pesticide
6.2/Table 3/ix(Polynuclear aromatic hydrocarbons)	-	1500.00	-
6.2/Table 3/viii(Polychlorinated biphenyle (PCB))	-	1500.00	-
6.1.1(Escherichia coli)	-	250.00	-
6.1.2(Coliform)	-	275.00	-
6.1.3(Faecal Streptococci)	-	275.00	-
Cl-6.1.3(Staphylococcus aureus)	-	275.00	-
6.1.4(Sulphite Reducing Anaerobe)	-	275.00	-
6.1.5(Pseudomonas aeruginosa)	-	275.00	-
6.1.6(Yeast and moould)	-	275.00	-
6.1.7(Salmonella)	-	275.00	-
Cl-6.1.7(Shigella)	-	275.00	-
6.1.8(Vibrio Cholera)	-	275.00	-
Cl-6.1.8(V. parahaemolyticus)	-	275.00	-
6.2/Table 2/v(Copper)	-	60.00	-
6.2/Table 2/vii(Barium)	-	60.00	-
6.2/Table 2/viii(Antimony)	-	60.00	-
6.2/Table 2/ix(Borate)	-	60.00	-
6.2/Table 2/x(Silver)	-	60.00	-
6.2/Table 2/xvii(Selenium)	-	60.00	-
6.2/Table 3/i(Arsenic)	-	60.00	-
6.2/Table 3/ii(Cadmium)	-	60.00	-
6.2/Table 3/iv(Chromium)	-	60.00	-
6.2/Table 3/v(Mercury)	-	60.00	-
6.2/Table 3/vi(Lead)	-	60.00	-
6.2/Table 3/vii(Nickel)	-	60.00	-
6.2/Table 3/x(Uranium)	-	60.00	-
6.2/Table 1/i(Colour)	-	60.00	-
6.2/Table 1/ii(Odour)	-	60.00	-
6.2/Table 1/iii(Taste)	-	60.00	-
6.2/Table 1/iv(Turbidity)	-	60.00	-
6.2/Table 1/v(Total Dissoved)	-	60.00	-
6.2/Table 1/vi(pH Value)	-	60.00	-
6.2/Table 2/i(Nitrate)	-	60.00	-
6.2/Table 2/ii(Nitrite)	-	60.00	-
6.2/Table 2/iii(Sulphide)	-	60.00	-
6.2/Table 2/vi(Fluoride)	-	60.00	-
6.2/Table 2/xi(Chloride)	-	60.00	-
6.2/Table 2/xii(Sulphate)	-	60.00	-
6.2/Table 2/xiii(Magnesium)	-	60.00	-
6.2/Table 2/xiv(Calcium)	-	60.00	-
6.2/Table 2/xv(Sodium)	-	60.00	-
6.2/Table 2/xvi(Alkalinity)	-	60.00	-
6.2/Table 2/xix(Phenolic Compounds)	-	200.00	-
6.2/Table 2/xx(Anionic Surface active agents)	-	140.00	-
6.2/Table 3/iii(Cyanide)	-	60.00	-
6.2/Table 2/iv(Manganese)	-	60.00	-
Cl- 6.3, Annex N (i)(P,P -DDE)	-	1250.00	-
Cl- 6.3, Annex N (i)(O,P -DDE)	-	1250.00	-
Cl- 6.3, Annex N (i)(P,P- DDT)	-	1250.00	-
Cl- 6.3, Annex N (i)(O,P -DDT)	-	1250.00	-
Cl-6.3, Annex N (i)(P,P- DDD)	-	1250.00	-
Cl-6.3, Annex N (i)(O,P-DDD)	-	1250.00	-
Cl- 6.3, Annex N (ii)(γ-HCH (lindane))	-	1250.00	-
Cl- 6.3, Annex N (iii)(α-HCH)	-	1250.00	-
Cl- 6.3, Annex N (iii)(β-HCH)	-	1250.00	-
Cl- 6.3, Annex N (iii)(δ - HCH)	-	1250.00	-
Cl- 6.3, Annex N (iv)(Endosulfan - α)	-	1250.00	-
Cl- 6.3, Annex N (iv)(Endosulfan - β)	-	1250.00	-
Cl- 6.3, Annex N (iv)(Endosulfan - sulphate)	-	1250.00	-
Cl- 6.3, Annex N (v)(Monocrotophos)	-	1250.00	-
Cl- 6.3, Annex N (vi)(Ethion)	-	1250.00	-
Cl- 6.3, Annex N (vii)(Chlorpyrifos)	-	1250.00	-
Cl- 6.3, Annex N (viii)(Phorate and its oxygen analogue)	-	1250.00	-
Cl- 6.3, Annex N (viii)(phorate sulphoxide)	-	1250.00	-
Cl- 6.3, Annex N (viii)(phorate sulphone)	-	1250.00	-
Cl- 6.3, Annex N (ix)(2,4-D)	-	1250.00	-
Cl- 6.3, Annex N (x)(Butachlor)	-	1250.00	-
Cl- 6.3, Annex N (xi)(Isoproturon)	-	1250.00	-
Cl- 6.3, Annex N (xii)(Alachlor)	-	1250.00	-
Cl- 6.3, Annex N (xiii)(Atrazine)	-	1250.00	-
Cl- 6.3, Annex N (xiv)(Methyl parathion)	-	1250.00	-
Cl- 6.3, Annex N (xiv)(Methyl paraoxon)	-	1250.00	-
Cl- 6.3, Annex N (xv)(Malathion)	-	1250.00	-
Cl- 6.3, Annex N (xv)(malaoxon)	-	1250.00	-
Cl- 6.3, Annex N (xvi)(Aldrin)	-	1250.00	-
6.2/Table 2/xviii(Mineral Oil)	-	1300.00	-
Cl-6.3, Annex N (XVI)(Dieldrin)	-	1250.00	-
6.2/Table 3/ix(Polynuclear aromatic hydrocarbons)	-	1500.00	-
6.2/Table 3/viii(Polychlorinated biphenyle (PCB))	-	1500.00	-
6.1.1(Escherichia coli)	-	250.00	-
6.1.2(Coliform)	-	275.00	-
6.1.3(Faecal Streptococci)	-	275.00	-
Cl-6.1.3(Staphylococcus aureus)	-	275.00	-
6.1.4(Sulphite Reducing Anaerobe)	-	275.00	-
6.1.5(Pseudomonas aeruginosa)	-	275.00	-
6.1.6(Yeast and moould)	-	275.00	-
6.1.7(Salmonella)	-	275.00	-
Cl-6.1.7(Shigella)	-	275.00	-
6.1.8(Vibrio Cholera)	-	275.00	-
Cl-6.1.8(V. parahaemolyticus)	-	275.00	-
6.2/Table 2/v(Copper)	-	60.00	-
6.2/Table 2/vii(Barium)	-	60.00	-
6.2/Table 2/viii(Antimony)	-	60.00	-
6.2/Table 2/ix(Borate)	-	60.00	-
6.2/Table 2/x(Silver)	-	60.00	-
6.2/Table 2/xvii(Selenium)	-	60.00	-
6.2/Table 3/i(Arsenic)	-	60.00	-
6.2/Table 3/ii(Cadmium)	-	60.00	-
6.2/Table 3/iv(Chromium)	-	60.00	-
6.2/Table 3/v(Mercury)	-	60.00	-
6.2/Table 3/vi(Lead)	-	60.00	-
6.2/Table 3/vii(Nickel)	-	60.00	-
6.2/Table 3/x(Uranium)	-	60.00	-
6.2/Table 1/i(Colour)	-	60.00	-
6.2/Table 1/ii(Odour)	-	60.00	-
6.2/Table 1/iii(Taste)	-	60.00	-
6.2/Table 1/iv(Turbidity)	-	60.00	-
6.2/Table 1/v(Total Dissoved)	-	60.00	-
6.2/Table 1/vi(pH Value)	-	60.00	-
6.2/Table 2/i(Nitrate)	-	60.00	-
6.2/Table 2/ii(Nitrite)	-	60.00	-
6.2/Table 2/iii(Sulphide)	-	60.00	-
6.2/Table 2/vi(Fluoride)	-	60.00	-
6.2/Table 2/xi(Chloride)	-	60.00	-
6.2/Table 2/xii(Sulphate)	-	60.00	-
6.2/Table 2/xiii(Magnesium)	-	60.00	-
6.2/Table 2/xiv(Calcium)	-	60.00	-
6.2/Table 2/xv(Sodium)	-	60.00	-
6.2/Table 2/xvi(Alkalinity)	-	60.00	-
6.2/Table 2/xix(Phenolic Compounds)	-	200.00	-
6.2/Table 2/xx(Anionic Surface active agents)	-	140.0	-
6.2/Table 3/iii(Cyanide)	-	60.00	-
6.2/Table 2/iv(Manganese)	-	60.00	-
Cl- 6.3, Annex N (i)(P,P -DDE)	-	1250.00	-
Cl- 6.3, Annex N (i)(O,P -DDE)	-	1250.00	-
Cl- 6.3, Annex N (i)(P,P- DDT)	-	1250.00	-
Cl- 6.3, Annex N (i)(O,P -DDT)	-	1250.00	-
Cl-6.3, Annex N (i)(P,P- DDD)	-	1250.00	-
Cl-6.3, Annex N (i)(O,P-DDD)	-	1250.00	-
Cl- 6.3, Annex N (ii)(γ-HCH (lindane))	-	1250.00	-
Cl- 6.3, Annex N (iii)(α-HCH)	-	1250.00	-
Cl- 6.3, Annex N (iii)(β-HCH)	-	1250.00	-
Cl- 6.3, Annex N (iii)(δ - HCH)	-	1250.00	-
Cl- 6.3, Annex N (iv)(Endosulfan - α)	-	1250.00	-
Cl- 6.3, Annex N (iv)(Endosulfan - β)	-	1250.00	-
Cl- 6.3, Annex N (iv)(Endosulfan - sulphate)	-	1250.00	-
Cl- 6.3, Annex N (v)(Monocrotophos)	-	1250.00	-
Cl- 6.3, Annex N (vi)(Ethion)	-	1250.00	-
Cl- 6.3, Annex N (vii)(Chlorpyrifos)	-	1250.00	-
Cl- 6.3, Annex N (viii)(Phorate and its oxygen analogue)	-	1250.00	-
Cl- 6.3, Annex N (viii)(phorate sulphoxide)	-	1250.00	-
Cl- 6.3, Annex N (viii)(phorate sulphone)	-	1250.00	-
Cl- 6.3, Annex N (ix)(2,4-D)	-	1250.00	-
Cl- 6.3, Annex N (x)(Butachlor)	-	1250.00	-
Cl- 6.3, Annex N (xi)(Isoproturon)	-	1250.00	-
Cl- 6.3, Annex N (xii)(Alachlor)	-	1250.00	-
Cl- 6.3, Annex N (xiii)(Atrazine)	-	1250.00	-
Cl- 6.3, Annex N (xiv)(Methyl parathion)	-	1250.00	-
Cl- 6.3, Annex N (xiv)(Methyl paraoxon)	-	1250.00	-
Cl- 6.3, Annex N (xv)(Malathion)	-	1250.00	-
Cl- 6.3, Annex N (xv)(malaoxon)	-	1250.00	-
Cl- 6.3, Annex N (xvi)(Aldrin)	-	1250.00	-
6.2/Table 2/xviii(Mineral Oil)	-	1300.00	-
Cl-6.3, Annex N (XVI)(Dieldrin)	-	1250.00	-
6.2/Table 3/ix(Polynuclear aromatic hydrocarbons)	-	1500.00	-
6.2/Table 3/viii(Polychlorinated biphenyle (PCB))	-	1500.00	-
6.1.1(Escherichia coli)	-	250.00	-
6.1.2(Coliform)	-	275.00	-
6.1.3(Faecal Streptococci)	-	275.00	-
Cl-6.1.3(Staphylococcus aureus)	-	275.00	-
6.1.4(Sulphite Reducing Anaerobe)	-	275.00	-
6.1.5(Pseudomonas aeruginosa)	-	275.00	-
6.1.6(Yeast and moould)	-	275.00	-
6.1.7(Salmonella)	-	275.00	-
Cl-6.1.7(Shigella)	-	275.00	-
6.1.8(Vibrio Cholera)	-	275.00	-
Cl-6.1.8(V. parahaemolyticus)	-	275.00	-
6.2/Table 2/v(Copper)	-	60.00	-
6.2/Table 2/vii(Barium)	-	60.00	-
6.2/Table 2/viii(Antimony)	-	60.00	-
6.2/Table 2/ix(Borate)	-	60.00	-
6.2/Table 2/x(Silver)	-	60.00	-
6.2/Table 2/xvii(Selenium)	-	60.00	-
6.2/Table 3/i(Arsenic)	-	60.00	-
6.2/Table 3/ii(Cadmium)	-	60.00	-
6.2/Table 3/iv(Chromium)	-	60.00	-
6.2/Table 3/v(Mercury)	-	60.00	-
6.2/Table 3/vi(Lead)	-	60.00	-
6.2/Table 3/vii(Nickel)	-	60.00	-
6.2/Table 3/x(Uranium)	-	1800.00	-
6.2/Table 1/i(Colour)	-	60.00	-
6.2/Table 1/ii(Odour)	-	60.00	-
6.2/Table 1/iii(Taste)	-	60.00	-
6.2/Table 1/iv(Turbidity)	-	60.00	-
6.2/Table 1/v(Total Dissoved)	-	60.00	-
6.2/Table 1/vi(pH Value)	-	60.00	-
6.2/Table 2/i(Nitrate)	-	60.00	-
6.2/Table 2/ii(Nitrite)	-	60.00	-
6.2/Table 2/iii(Sulphide)	-	60.00	-
6.2/Table 2/vi(Fluoride)	-	60.00	-
6.2/Table 2/xi(Chloride)	-	60.00	-
6.2/Table 2/xii(Sulphate)	-	60.00	-
6.2/Table 2/xiii(Magnesium)	-	60.00	-
6.2/Table 2/xiv(Calcium)	-	60.00	-
6.2/Table 2/xv(Sodium)	-	60.00	-
6.2/Table 2/xvi(Alkalinity)	-	60.00	-
6.2/Table 2/xix(Phenolic Compounds)	-	200.00	-
6.2/Table 2/xx(Anionic Surface active agents)	-	140.00	-
6.2/Table 3/iii(Cyanide)	-	60.00	-
6.2/Table 2/iv(Manganese)	-	60.00	-

-
Included w.e.f.12.02.2025 Exclusion Cl 6.2/Table 4/i (Alpha emitters, Bq/l, Max) Cl 6.2/Table 4/ii (Beta emitters, Bq/l, Max)

7966

CIPET: CENTRE FOR SKILLING AND TECHNICAL SUPPORT (CSTS) - (CIPET), AURANGABAD

7123534

IS 9873 : Part 1 (2019)

Safety of toys: Part 1 safety aspects related to mechanical and physical properties (Fourth Revision)

23325 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Normal use)	-	500	-
4.2(Reasonably foreseeable abuse)	-	500	-
4.3.1(Material quality)	-	500	-
4.3.2(Expanding materials)	-	1200	500+700
4.4.1(For children under 36 months)	-	500	-
4.4.2(For children 36 months and over but under 72 months)	-	500	-
4.5.1.2(Squeeze toys, rattles, and certain other toys and components of toys)	-	500	-
4.5.1.3(Other toys or components of toys with nearly spherical, hemispherical, circular flared, or dome-shaped ends of toys having a mass less than 0,5 kg and intended for children under 18 months)	-	500	-
4.5.1.4(Toy fasteners (e.g. nails, bolts, screws, and pegs) with nearly spherical, hemispherical, or dome-shaped ends intended for children 18 months and over but under 48 months)	-	500	-
4.5.2(Small balls)	-	500	-
4.5.3(Pompoms)	-	500	-
4.5.4(Pre-school playfigures)	-	500	-
4.5.5(Toy pacifiers)	-	500	-
4.5.6(Balloons)	-	500	-
4.5.7(Marbles)	-	500	-
4.5.8(Hemisphericshaped toys)	-	500	-
4.6.1(Accessible sharp edges of glass or metal)	-	500	-
4.6.2(Functional sharp edges)	-	500	-
4.6.3(Edges on metal toys)	-	500	-
4.6.4(Edges on moulded toys)	-	500	-
4.6.5(Edges on exposed bolts or threaded rods)	-	500	-
4.7.1(Accessible sharp points)	-	500	-
4.7.2(Functional sharp points)	-	500	-
4.7.3(Wooden toys)	-	500	-
4.8(Projections)	-	500	-
4.9(Metal wires and rods)	-	500	-
4.10(Plastic film or plastic bags in packaging and in toys)	-	500	-
4.11.1(General)	-	500	-
4.11.2(Cords in toys intended for children under 18 months)	-	1100	-
4.11.3(Cords in toys intended for children 18 months and over but under 36 months)	-	500	-
4.11.4(Fixed loops and nooses intended for children under 36 months)	-	500	-
4.11.5(Cords on pull toys)	-	500	-
4.11.6(Electrical cables)	-	1100	-
4.11.7(Diameter of certain cords intended for children under 36 months)	-	500	-
4.11.8(Self-retracting cords intended for children under 36 months)	-	500	-
4.11.9(Toys attached to or intended to be strung across, or otherwise attached to, a cradle, cot, perambulator or carriage)	-	500	-
4.11.10(Cords on toy bags)	-	500	-
4.11.11(Cords, strings and lines for flying toys)	-	500	-
4.12.1(Toy pushchairs, perambulators and similar toys)	-	500	-
4.12.2(Other toys with folding mechanisms)	-	500	-
4.12.3(Hinge-line clearance)	-	500	-
4.13.1(Circular holes in rigid materials)	-	500	-
4.13.2(Accessible clearances for movable ,segments)	-	500	-
4.13.3(Chains or belts in ride-on toys)	-	500	-
4.13.4(Other driving mechanisms)	-	500	-
4.13.5(Winding keys)	-	500	-
4.14(Springs)	-	500	-
4.15.1.1(Sideways stability, feet available for stabilization)	-	500	-
4.15.1.2(Sideways stability, feet unavailable for stabilization)	-	500	-
4.15.1.3(Fore and aft stability)	-	500	-
4.15.2(Overload requirements for ride-on toys and seats)	-	500	-
4.15.3(Stability of stationary floor toys)	-	500	-
4.16.1(Ventilation)	-	500	-
4.16.2.1(Lids, doors and similar devices)	-	1500	-
4.16.2.2(Lid support for toy chests and similar toys)	-	1500	-
4.16.3(Toys that enclose the head)	-	1500	-
4.17(Simulated protective equipment, such as helmets, hats and goggles)	-	500	-
4.18.2(Projectiles)	-	500	-
4.18.3(Projectile toys with stored energy)	-	500	-
4.18.4(Projectile toys without stored energy)	-	500	-
4.19(Rotors and propellers)	-	500	-
4.20(Aquatic toys)	-	500	-
4.21(Braking)	-	500	-
4.22.1(Instructions for use)	-	500	-
4.22.2(Determination of maximum saddle height)	-	500	-
4.22.3(Braking requirements)	-	500	-
4.23(Speed limitation of electrically driven ride-on toys)	-	500	-
4.24(Toys containing a heat source)	-	500	-
4.25(Liquid -filled toys)	-	1200	500+700
4.26(Mouth - actuated toys)	-	500	-
4.27(Toy roller skates, toy inline skates and toy skateboards)	-	500	-
4.28(Percussion caps specifically designed for use in toys)	-	500	-
4.29(Acoustic requirements)	-	500	-
4.30.2(Warnings and instructions for use)	-	500	-
4.30.3(Strength)	-	500	-
4.30.4(Stability)	-	500	-
4.30.5(Adjustable and folding steering tubes and handlebars)	-	500	-
4.30.6(Braking)	-	500	-
4.30.7(Wheel size)	-	500	-
4.30.8(Projections)	-	500	-
4.31.1(Magnetic/electrical experimental sets intended for children 8 years and over)	-	500	-
4.31.2(All other toys with magnets and magnetic components)	-	500	-
4.32(Yo-yo balls)	-	500	-
4.33(Straps intended to be worn fully or partially around the neck)	-	500	-
4.34(Sledges and toboggans with cords for pulling)	-	500	-
4.35(Jaw entrapment in handles and steering wheels)	-	500	-

31 Dec, 2026

-
Included w.e.f 17.10.2024 For Part-1 only

7967

TCR ENGINEERING SERVICES PVT.LTD., NAVI MUMBAI

7103506

IS 2501 (1995)

Solid drawn copper tubesfor general engineering purposes - Specification (Third Revision)

12400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. No.5(Grades)	-	3000	10 % Discount to BIS on total invoiced value
Cl. No.6(CONDITION)	-	500	10 % Discount to BIS on total invoiced value
Cl. No. 7(FREEDOM FROM DEFECTS)	-	500	10 % Discount to BIS on total invoiced value
Cl. No. 8.1(Dimensions)	-	500	10 % Discount to BIS on total invoiced value
Cl. No. 8.2(Tolerances)	-	500	10 % Discount to BIS on total invoiced value
Cl. No. 9(CHEMICAL COMPOSITION)	-	3000	10 % Discount to BIS on total invoiced value
Cl. No. 10.1.1, Table no. 1(Tensile Test)	-	1200	10 % Discount to BIS on total invoiced value
Cl. No. 10.2(Flattening and Doubling-Over Test)	-	500	10 % Discount to BIS on total invoiced value
Cl. No. 10.3(Drift Expanding Test)	-	500	10 % Discount to BIS on total invoiced value
Cl. No. 10.4(Non-Destructive Testing)	-	1500	10 % Discount to BIS on total invoiced value
Cl. No. 10.5("Microscopic Examination ( for 0 Condition Only )")	-	1200	10 % Discount to BIS on total invoiced value
Cl. No. 13(Marking)	-	500	10 % Discount to BIS on total invoiced value
10.6(Hydrogen Embrittlement Test)	-	4000	10 % Discount to BIS on total invoiced value
Cl. No.5(Grades)	-	3000	10 % Discount to BIS on total invoiced value
Cl. No.6(CONDITION)	-	500	10 % Discount to BIS on total invoiced value
Cl. No. 7(FREEDOM FROM DEFECTS)	-	500	10 % Discount to BIS on total invoiced value
Cl. No. 8.1(Dimensions)	-	500	10 % Discount to BIS on total invoiced value
Cl. No. 8.2(Tolerances)	-	500	10 % Discount to BIS on total invoiced value
Cl. No. 9(CHEMICAL COMPOSITION)	-	3000	10 % Discount to BIS on total invoiced value
Cl. No. 10.1.1, Table no. 1(Tensile Test)	-	1200	10 % Discount to BIS on total invoiced value
Cl. No. 10.2(Flattening and Doubling-Over Test)	-	500	10 % Discount to BIS on total invoiced value
Cl. No. 10.3(Drift Expanding Test)	-	500	10 % Discount to BIS on total invoiced value
Cl. No. 10.4(Non-Destructive Testing)	-	1500	10 % Discount to BIS on total invoiced value
Cl. No. 10.5("Microscopic Examination ( for 0 Condition Only )")	-	1200	10 % Discount to BIS on total invoiced value
Cl. No. 13(Marking)	-	500	10 % Discount to BIS on total invoiced value
10.6(Hydrogen Embrittlement Test)	-	4000	10 % Discount to BIS on total invoiced value
Cl. No.5(Grades)	-	500	10 % Discount to BIS on total invoiced value
Cl. No.6(CONDITION)	-	500	10 % Discount to BIS on total invoiced value
Cl. No. 7(FREEDOM FROM DEFECTS)	-	500	10 % Discount to BIS on total invoiced value
Cl. No. 8.1(Dimensions)	-	500	10 % Discount to BIS on total invoiced value
Cl. No. 8.2(Tolerances)	-	500	10 % Discount to BIS on total invoiced value
Cl. No. 9(CHEMICAL COMPOSITION)	-	3000	10 % Discount to BIS on total invoiced value
Cl. No. 10.1.1, Table no. 1(Tensile Test)	-	1200	10 % Discount to BIS on total invoiced value
Cl. No. 10.2(Flattening and Doubling-Over Test)	-	500	10 % Discount to BIS on total invoiced value
Cl. No. 10.3(Drift Expanding Test)	-	500	10 % Discount to BIS on total invoiced value
Cl. No. 10.4(Non-Destructive Testing)	-	1500	10 % Discount to BIS on total invoiced value
Cl. No. 10.5("Microscopic Examination ( for 0 Condition Only )")	-	1200	10 % Discount to BIS on total invoiced value
Cl. No. 13(Marking)	-	500	10 % Discount to BIS on total invoiced value
10.6(Hydrogen Embrittlement Test)	-	4000	10 % Discount to BIS on total invoiced value

31 Dec, 2026

-
Included.w.e.f.22.01.2025 Exclusion Cl. No. 10.4 (Non-Destructive Testing) (Optional test)

7968

BIS, Eastern Regional Laboratory (ERL)

None

IS 1855 (2022)

Stranded steel wire ropes for winding and man - Riding haulages in mines - Specification Third Revision

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.6.1 and Table 1 of IS 1835 (Carbon- Relevant parts of IS 228 or any other established chemical/instrumental method)	-
Cl.6.1 and Table 1 of IS 1835 (Sulphur- Relevant parts of IS 228 or any other established chemical/instrumental method)	-
Cl.6.1 and Table 1 of IS 1835 (Phosphorous- Relevant parts of IS 228 or any other established chemical/instrumental method)	-
Cl.6.1 and Table 1 of IS 1835 (Manganese- IRelevant parts of IS 228 or any other established chemical/instrumental method)	-
Cl.6.1 and Table 1 of IS 1835 (Silicon- Relevant parts of IS 228 or any other established chemical/instrumental method)	-
Cl.6.1 and Table 1 of IS 1835 (Chromium-Relevant parts of IS 228 or any other established chemical/instrumental method)	-
Cl.6.1 and Table 1 of IS 1835 (Copper- Relevant parts of IS 228 or any other established chemical/instrumental method)	-
Cl.6.1 and Table 1 of IS 1835 (Nickel- Relevant parts of IS 228 or any other established chemical/instrumental method)	-
Clause 4 (Rope size and tolerance)	-
Clause 6.4 (Lay)	-
Clause 7 (Galvanizing)	-
Clause 9 (Freedom from defects)	-

-
Mech: Declarations required - Nominal dia, Type of core, Rope grade

7969

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 5557 (2004)

Industrial and protective rubber knee and ankle boots - Specification (Fourth Revision)

Industrial and protective rubber knee and ankle boots

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5/5.1.7/5.1.7.8(REQUIREMENTS- Physical Requirements-Resistance to oil)	-	500	-
5/5.1.1-Fig. 1, Fig. 2 and Fig. 3(REQUIREMENTS-Design)	-	200	-
5/5.1.2 -IS 1638(REQUIREMENTS-Size)	-	200	-
5/5.1.3-Table1(REQUIREMENTS-Thickness)	-	200	-
5/5.1.4/5.1.4.1-Table2(REQUIREMENTS-Materials-Rubber components)	-	500	-
5/5.1.4/5.1.4.2(REQUIREMENTS-Materials-Fabric- accordance with IS 1969)	-	600	-
5/5.1.4/5.1.4.3(REQUIREMENTS-Materials-Protective Steel Toe Cap- an per IS 5852)	-	500	-
5/5.1.6/5.1.6.1-Fig. 1, Fig. 2, Fig. 3, .Fig. 4, Fig. 5 and Table 3.(REQUIREMENTS- Construction)	-	1000	-
5/5.1.6/5.1.6.2(REQUIREMENTS- Construction)	-	500	-
5/5.1.7/5.1.7.1(REQUIREMENTS- Physical Requirements-Heat treatment- as per IS 3400 (Part 4))	-	500	-
5/5.1.7/5.1.7.2(REQUIREMENTS- Physical Requirements-Composite strength)	-	500	-
5/5.1.7/5.1.7.3-Table 4(REQUIREMENTS- Physical Requirements-Flexing endurance- as per Annex B.)	-	600	-
5/5.1.7/5.1.7.4(REQUIREMENTS- Physical Requirements- Leakage resistance test)	-	500	-
5/5.1.7/5.1.7.5(REQUIREMENTS- Physical Requirements- Consolidation test- as per IS IS 3400 (Part 5))	-	3000	-
5/5.1.7/5.1.7.6(REQUIREMENTS- Physical Requirements- Performance test- as per Annex C)	-	0	-
5/5.1.7/5.1.7.7(REQUIREMENTS- Physical Requirements-Height of the boots)	-	500	-
5/5.1.7/5.1.7.8(REQUIREMENTS- Physical Requirements-Resistance to oil)	-	0	-
5/5.1.1-Fig. 1, Fig. 2 and Fig. 3(REQUIREMENTS-Design)	-	0	-
5/5.1.2 -IS 1638(REQUIREMENTS-Size)	-	0	-
5/5.1.3-Table1(REQUIREMENTS-Thickness)	-	0	-
5/5.1.4/5.1.4.1-Table2(REQUIREMENTS-Materials-Rubber components)	-	0	-
5/5.1.4/5.1.4.2(REQUIREMENTS-Materials-Fabric- accordance with IS 1969)	-	700	-
5/5.1.4/5.1.4.3(REQUIREMENTS-Materials-Protective Steel Toe Cap- an per IS 5852)	-	0	-
5/5.1.6/5.1.6.1-Fig. 1, Fig. 2, Fig. 3, .Fig. 4, Fig. 5 and Table 3.(REQUIREMENTS- Construction)	-	0	-
5/5.1.6/5.1.6.2(REQUIREMENTS- Construction)	-	0	-
5/5.1.7/5.1.7.1(REQUIREMENTS- Physical Requirements-Heat treatment- as per IS 3400 (Part 4))	-	0	-
5/5.1.7/5.1.7.2(REQUIREMENTS- Physical Requirements-Composite strength)	-	0	-
5/5.1.7/5.1.7.3-Table 4(REQUIREMENTS- Physical Requirements-Flexing endurance- as per Annex B.)	-	0	-
5/5.1.7/5.1.7.4(REQUIREMENTS- Physical Requirements- Leakage resistance test)	-	0	-
5/5.1.7/5.1.7.5(REQUIREMENTS- Physical Requirements- Consolidation test- as per IS IS 3400 (Part 5))	-	0	-
5/5.1.7/5.1.7.6(REQUIREMENTS- Physical Requirements- Performance test- as per Annex C)	-	0	-
5/5.1.7/5.1.7.7(REQUIREMENTS- Physical Requirements-Height of the boots)	-	0	-
5/5.1.7/5.1.7.8(REQUIREMENTS- Physical Requirements-Resistance to oil)	-	0	-
5/5.1.1-Fig. 1, Fig. 2 and Fig. 3(REQUIREMENTS-Design)	-	0	-
5/5.1.2 -IS 1638(REQUIREMENTS-Size)	-	0	-
5/5.1.3-Table1(REQUIREMENTS-Thickness)	-	0	-
5/5.1.4/5.1.4.1-Table2(REQUIREMENTS-Materials-Rubber components)	-	0	-
5/5.1.4/5.1.4.2(REQUIREMENTS-Materials-Fabric- accordance with IS 1969)	-	0	-
5/5.1.4/5.1.4.3(REQUIREMENTS-Materials-Protective Steel Toe Cap- an per IS 5852)	-	0	-
5/5.1.6/5.1.6.1-Fig. 1, Fig. 2, Fig. 3, .Fig. 4, Fig. 5 and Table 3.(REQUIREMENTS- Construction)	-	0	-
5/5.1.6/5.1.6.2(REQUIREMENTS- Construction)	-	0	-
5/5.1.7/5.1.7.1(REQUIREMENTS- Physical Requirements-Heat treatment- as per IS 3400 (Part 4))	-	0	-
5/5.1.7/5.1.7.2(REQUIREMENTS- Physical Requirements-Composite strength)	-	0	-
5/5.1.7/5.1.7.3-Table 4(REQUIREMENTS- Physical Requirements-Flexing endurance- as per Annex B.)	-	0	-
5/5.1.7/5.1.7.4(REQUIREMENTS- Physical Requirements- Leakage resistance test)	-	0	-
5/5.1.7/5.1.7.5(REQUIREMENTS- Physical Requirements- Consolidation test- as per IS IS 3400 (Part 5))	-	0	-
5/5.1.7/5.1.7.6(REQUIREMENTS- Physical Requirements- Performance test- as per Annex C)	-	0	-
5/5.1.7/5.1.7.7(REQUIREMENTS- Physical Requirements-Height of the boots)	-	0	-
5, 5.1(Requirement)	-	0	-
6.1(Marking)	-	200	-
6, 6.1(Packing)	-	0	-
5, 5.1(Requirement)	-	0	-
6.1(Marking)	-	0	-
6.2(Packing)	-	0	-

-
Included w.e.f 09.04.2025

7970

Maarc Labs Private Limited, Pune

7119116

IS 14543 (2024)

Packaged Drinking Water Other than Packaged Natural Mineral Water Specification Third Revision

17700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.2.1(Escherichia coli or thermotolerant bacteria)	-	307.7	-
Cl-5.2.2(Coliform)	-	307.7	-
Cl-5.2.3(Staphylococcus aureus)	-	307.7	-
Cl-5.2.3(Faecal streptococci)	-	307.7	-
Cl-5.2.4(Sulphite Reducing Anaerobes)	-	307.7	-
Cl-5.2.5(Pseudomonas Aeruginosa)	-	307.7	-
Cl-5.2.6(Aerobic Microbial Count @ 37 deg C)	-	307.7	-
5.2.6(Aerobic Microbial Count @ 20 to 22 deg C)	-	307.7	-
Cl-5.2.7(Yeast and mould)	-	307.7	-
Cl-5.2.8(Salmonella)	-	307.7	-
Cl-5.2.8(shigella)	-	307.7	-
Cl-5.2.9(Vibrio cholera)	-	307.7	-
Cl-5.2.9(V.parahaemolyticus)	-	307.7	-
Cl-5.3, Table-2 (i)(Barium (as Ba))	-	100	-
Cl-5.3, Table-2 (ii)(Copper (as Cu))	-	100	-
Cl-5.3, Table-2 (iii)(Iron (as Fe))	-	100	-
Cl-5.3, Table-2 (iv)(Manganese (as Mn))	-	100	-
Cl-5.3, Table-2 (viii)(Zinc (as Zn))	-	100	-
Cl-5.3, Table-2 (ix)(Silver (as Ag))	-	100	-
Cl-5.3, Table-2 (x)(Aluminium (as A1))	-	100	-
Cl-5.3, Table-2 (xii)(Selenium (as Se))	-	100	-
Cl-5.3, Table-2 (xvii)(Sodium (as Na))	-	100	-
Cl-5.3, Table-2 (xxiii)(Antimony (as Sb))	-	100	-
Cl-5.3, Table-2 (xxiv)(Borates (as B))	-	100	-
Cl-5.3, Table-3 (i)(Mercury (as Hg))	-	200	-
Cl-5.3, Table-3 (ii)(Cadmium (as Cd))	-	200	-
Cl-5.3, Table-3 (iii)(Arsenic (as As))	-	200	-
Cl-5.3, Table-3 (v)(Lead (as Pb))	-	200	-
Cl-5.3, Table-3 (vi)(Chromium (as Cr))	-	200	-
Cl-5.3, Table-3 (vii)(Nickel (as Ni))	-	200	-
Cl-5.3, Table-3 (x)(Uranium)	-	800	-
Cl-5.3, Table-1 (i)(Colour, true colour units, Max)	-	100	-
Cl-5.3, Table-1 (ii)(Odour)	-	100	-
Cl-5.3, Table-1 (iii)(Taste)	-	100	-
Cl-5.3, Table-1 (iv)(Turbidity, nephelometric turbidity unit (NTU), Max)	-	100	-
Cl-5.3, Table-1 (v)(Total dissolved solids, mg/l, Max)	-	100	-
Cl-5.3, Table-1 (vi)(pH)	-	100	-
Cl-5.3, Table-2 (v)(Nitrate (as NO3 ))	-	100	-
Cl-5.3, Table-2 (vi)(Nitrite (as NO2 ))	-	100	-
Cl-5.3, Table-2 (vii)(Fluoride (as F))	-	1000	-
Cl-5.3, Table-2 (xi)(Chloride (as Cl))	-	100	-
Cl-5.3, Table-2 (xiii)(Sulphate (as SO4 ))	-	100	-
Cl-5.3, Table-2 (xiv)(Alkalinity (as HCO3 ))	-	100	-
Cl-5.3, Table-2 (xv)(Calcium (as Ca))	-	100	-
Cl-5.3, Table-2 (xvi)(Magnesium (as Mg))	-	100	-
Cl-5.3, Table-2 (xviii)(Residual free chlorine)	-	500	-
Cl-5.3, Table-2 (xix)(Phenolic compounds (as C6H5OH))	-	100	-
Cl-5.3, Table-2 (xx)(Mineral oil)	-	500	-
Cl-5.3, Table-2 (xxi)(Anionic surface active agents)	-	100	-
Cl-5.3, Table-2 (xxii)(Sulphide)	-	100	-
Cl-5.3, Table-2 (xxv)(Bromates (as BrO3 ))	-	1000	-
Cl-5.3, Table-3 (iv)(Cyanide (as CN))	-	200	-
5.4/Annex D/i(P,P-DDT)	-	129	-
5.4/Annex D/i(O,P-DDT)	-	129	-
5.4/Annex D/i(O,P-DDD)	-	129	-
5.4/Annex D/i(P,P-DDE)	-	129	-
5.4/Annex D/i(O,P-DDE)	-	129	-
5.4/Annex D/i(P,P-DDD)	-	129	-
5.4/Annex D/ii(Lindane)	-	129	-
5.4/Annex D/iii(d-HCH)	-	129	-
5.4/Annex D/iii(a-HCH)	-	129	-
5.4/Annex D/iii(β- HCH)	-	129	-
5.4/Annex D/iv(b-Endosulfan)	-	129	-
5.4/Annex D/iv(Endosulfan sulfate)	-	129	-
5.4/Annex D/iv(a-Endosulfan)	-	129	-
5.4/Annex D/v(Monochrotophos)	-	129	-
5.4/Annex D/vi(Ethion)	-	129	-
5.4/Annex D/vii(Chlorpyrifos)	-	129	-
5.4/Annex D/viii(Phorate)	-	129	-
5.4/Annex D/viii(Phorate sulphoxide)	-	129	-
5.4/Annex D/viii(Phorate sulfone)	-	129	-
5.4/Annex D/ix(2,4 –D)	-	129	-
5.4/Annex D/x(Butachlor)	-	129	-
5.4/Annex D/xi(Isoproturon)	-	129	-
5.4/Annex D/xii(Alachlor)	-	129	-
5.4/Annex D/xiii(Atrazine)	-	129	-
5.4/Annex D/xiv(Methyl parathion)	-	129	-
5.4/Annex D/xxvii(Methyl paraoxon)	-	129	-
5.4/Annex D/xv(Malathion)	-	129	-
5.4/Annex D/xxviii(Malaoxon)	-	129	-
5.4/Annex D/xvi(Dieldrin)	-	129	-
5.4/Annex D/xvi(Aldrin)	-	129	-
Cl-5.3, Table-3 (viii)(Polychlorinated biphenyl (PCB))	-	900	-
Cl-5.3, Table-3 (ix)(Polynuclear aromatic hydrocarbons)	-	900	-
Cl-5.4 (ii)(Total pesticide residue)	-	130	-
Cl-5.4 (i)(Pesticide residues considered individually)	-	129	-
5.4 i)(Dieldrin)	-	129	-
5.4 i)(Aldrin)	-	129	-
5.4 i)(Malathion)	-	129	-
5.4, i)("oxygen analogue of Malathion (Malaoxon)")	-	129	-
5.4 i)(Methyl Paraoxon)	-	129	-
5.4 i)(Methyl Parathion)	-	129	-
5.4 i)(Atrazine)	-	129	-
5.4 i)(Alachlor)	-	129	-
5.4 i)(Isoproturon)	-	129	-
5.4 i)(Butachlor)	-	129	-
5.4 i)(2,4-D)	-	129	-
5.4 i)(Phorate sulphone)	-	129	-
5.4 i)(Phorate sulphoxide)	-	129	-
5.4 i)(Phorate)	-	129	-
5.4 i)(Chlorpyrifos)	-	129	-
5.4 i)(Ethion)	-	129	-
5.4 i)(Monocrotophos)	-	129	-
5.4 i)(Endosulfan Sulphate)	-	129	-
5.4 i)(beta-Endosulfan)	-	129	-
5.4 i)(alpha-Endosulfan)	-	129	-
5.4 i)(Delta-HCH)	-	129	-
5.4 i)(beta-HCH)	-	129	-
5.4 i)(alpha-HCH)	-	129	-
5.4 i)(Gamma-HCH (Lindane))	-	129	-
5.4 i)(p,p DDD)	-	129	-
5.4 i)(o,p DDD)	-	129	-
5.4 i)(p,p DDE)	-	129	-
5.4, i)(o,p DDE)	-	129	-
5.4 i)(p,p DDT)	-	129	-
5.4 i)(o,p DDT)	-	129	-
Table 3, x)(Uranium)	-	800	-
5.3(Appearance)	-	100	-
Cl-5.1(General Requirements)	-	100	-

31 Dec, 2026

-
Included w.e.f.18.11.2024 Exclusion Cl-5.3, Table-4 (i) (Alpha emitters, Becquerel (Bq/l)) Cl-5.3, Table-4 (ii) (Beta emitters, Becquerel (Bq/l),)

7971

URS PRODUCTS AND TESTING PVT. LTD. (A29), NOIDA

8168906

IS 2619 (2018)

Glass beakers - Specification (Third Revision)

13000 View breakup
-

Clause No.	Exclusion	Remark
Cl.5 Capacity (a)overflow of capacity of a beaker shall exceed the nominal capacity by at least 5 %;)	-	-
Cl.5 Capacity (b) Distance between the levels corresponding to the nominal and overflow capacities shall be at least 10 mm.)	-	-
Cl.6 Material(Beakers shall be made of borosilicate glass 3.3 in accordance with ISO 3585. The glass shall be reasonably free from residual strain and from visible glass defects which might impair the safety and performance of the beaker.)	-	-
Cl.7.1 Dimensions(Low-form and tall-form beakers shall observe the dimensions specified in Table 1 and thick-walled beakers the dimensions specifed in Table 2. The tolerances on the external diameter shall be ±5 % of the value given in the tables.)	-	-
Cl.7.2 Radius at base(Beakers having a nominal capacity of 250 ml or greater shall have an external radius at the junction between the base and the side of 10 % to 20 % of the external diameter.)	-	-
Cl.7.2 Radius at base(Beakers having a nominal capacity less than 250 ml shall have a minimum radius at the junction between the base and the side of 5 % of the external diameter.)	-	-
Cl.7.3 Wall thickness(Substantial local irregularities from the minimum values for wall thickness given in the tables shall be avoided. That means, the minimum wall thickness shall fall at no place below the values given in Table 1 and Table 2 and the beakers shall comply with the requirement for thermal shock endurance specified in 8.5.)	-	-
Cl.8.1 Base(The design of the base shall enable the beaker to stand vertically on a plane horizontal surface without spinning or rocking)	-	-
8.2 Upper edge(The side of the beaker shall be slightly flared near the brim in a smooth and regular curve. The diameter of the brim shall be of the order of 5 % to 15 % greater than the diameter of the body. The edge of the brim shall be finished in a plane parallel with that of the horizontal base.)	-	-
Cl. 8.3 Spout(The spout shall be shaped so that, when the beaker is filled with water, the water may be poured in a regular stream clear of the side of the beaker. When the beaker is placed on a horizontal surface and filling is continued beyond its overflow capacity, the water shall first overflow from the spout and not from any other part of the brim.)	-	-
Cl.8.4 Scale(Beakers may be provided with a scale, which should approximately indicate the volume contained in the beaker.)	-	-
Cl.8.5 Thermal shock resistance(Beakers shall have a thermal shock resistance of 160 °C when tested in accordance with ISO 718.)	-	-
Cl.5 Capacity (a)overflow of capacity of a beaker shall exceed the nominal capacity by at least 5 %;)	-	-
Cl.5 Capacity (b) Distance between the levels corresponding to the nominal and overflow capacities shall be at least 10 mm.)	-	-
Cl.6 Material(Beakers shall be made of borosilicate glass 3.3 in accordance with ISO 3585. The glass shall be reasonably free from residual strain and from visible glass defects which might impair the safety and performance of the beaker.)	-	-
Cl.7.1 Dimensions(Low-form and tall-form beakers shall observe the dimensions specified in Table 1 and thick-walled beakers the dimensions specifed in Table 2. The tolerances on the external diameter shall be ±5 % of the value given in the tables.)	-	-
Cl.7.2 Radius at base(Beakers having a nominal capacity of 250 ml or greater shall have an external radius at the junction between the base and the side of 10 % to 20 % of the external diameter.)	-	-
Cl.7.2 Radius at base(Beakers having a nominal capacity less than 250 ml shall have a minimum radius at the junction between the base and the side of 5 % of the external diameter.)	-	-
Cl.7.3 Wall thickness(Substantial local irregularities from the minimum values for wall thickness given in the tables shall be avoided. That means, the minimum wall thickness shall fall at no place below the values given in Table 1 and Table 2 and the beakers shall comply with the requirement for thermal shock endurance specified in 8.5.)	-	-
Cl.8.1 Base(The design of the base shall enable the beaker to stand vertically on a plane horizontal surface without spinning or rocking)	-	-
8.2 Upper edge(The side of the beaker shall be slightly flared near the brim in a smooth and regular curve. The diameter of the brim shall be of the order of 5 % to 15 % greater than the diameter of the body. The edge of the brim shall be finished in a plane parallel with that of the horizontal base.)	-	-
Cl. 8.3 Spout(The spout shall be shaped so that, when the beaker is filled with water, the water may be poured in a regular stream clear of the side of the beaker. When the beaker is placed on a horizontal surface and filling is continued beyond its overflow capacity, the water shall first overflow from the spout and not from any other part of the brim.)	-	-
Cl.8.4 Scale(Beakers may be provided with a scale, which should approximately indicate the volume contained in the beaker.)	-	-
Cl.8.5 Thermal shock resistance(Beakers shall have a thermal shock resistance of 160 °C when tested in accordance with ISO 718.)	-	-
Cl.5 Capacity (a)overflow of capacity of a beaker shall exceed the nominal capacity by at least 5 %;)	-	-
Cl.6 Material(Beakers shall be made of borosilicate glass 3.3 in accordance with ISO 3585. The glass shall be reasonably free from residual strain and from visible glass defects which might impair the safety and performance of the beaker.)	-	-
Cl.7.1 Dimensions(Low-form and tall-form beakers shall observe the dimensions specified in Table 1 and thick-walled beakers the dimensions specifed in Table 2. The tolerances on the external diameter shall be ±5 % of the value given in the tables.)	-	-
Cl.7.2 Radius at base(Beakers having a nominal capacity of 250 ml or greater shall have an external radius at the junction between the base and the side of 10 % to 20 % of the external diameter.)	-	-
Cl.7.2 Radius at base(Beakers having a nominal capacity less than 250 ml shall have a minimum radius at the junction between the base and the side of 5 % of the external diameter.)	-	-
Cl.7.3 Wall thickness(Substantial local irregularities from the minimum values for wall thickness given in the tables shall be avoided. That means, the minimum wall thickness shall fall at no place below the values given in Table 1 and Table 2 and the beakers shall comply with the requirement for thermal shock endurance specified in 8.5.)	-	-
Cl.8.1 Base(The design of the base shall enable the beaker to stand vertically on a plane horizontal surface without spinning or rocking)	-	-
8.2 Upper edge(The side of the beaker shall be slightly flared near the brim in a smooth and regular curve. The diameter of the brim shall be of the order of 5 % to 15 % greater than the diameter of the body. The edge of the brim shall be finished in a plane parallel with that of the horizontal base.)	-	-
Cl. 8.3 Spout(The spout shall be shaped so that, when the beaker is filled with water, the water may be poured in a regular stream clear of the side of the beaker. When the beaker is placed on a horizontal surface and filling is continued beyond its overflow capacity, the water shall first overflow from the spout and not from any other part of the brim.)	-	-
Cl.8.4 Scale(Beakers may be provided with a scale, which should approximately indicate the volume contained in the beaker.)	-	-
Cl.8.5 Thermal shock resistance(Beakers shall have a thermal shock resistance of 160 °C when tested in accordance with ISO 718.)	-	-
Cl.5 Capacity (b) Distance between the levels corresponding to the nominal and overflow capacities shall be at least 10 mm.)	-	-

-
Included w.e.f.05.11.2024

7972

BIS, Eastern Regional Laboratory (ERL)

None

IS 15298 : Part 2 (2024)

Personal Protective Equipment Part 2 Safety Footwear (ISO 20345 : 2021, MOD) (Third Revision)

For all class, design and size

20400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 5.3.6, Table no 1 of IS 17011,(i) (Allergenic and carcinogenic disperse dyes)	-
Cl 5.3.6, Table no 1 of IS 17011 (ii) (Aromatic amines released from Azo dyes (each individual amine))	-
Cl 5.3.6, Table no 1 of IS 17011 (iii) (Aromatic amines released from Azo dyes (each individual amine))	-
Cl 5.3.6, Table no 1 of IS 17011 (iv) (Chromium (VI))	-
Cl 5.3.6, Table no 1 of IS 17011 (v) (Dimethyl fumarate (DMFU))	-
Cl 5.3.6, Table no1 of IS 17011 (vi) (Formaldehyde (free or released by partial hydrolysis))	-
Cl 5.3.6, Table no 1 of IS 17011 (vii) (Formaldehyde)	-
Cl 5.3.6, Table no 1 of IS 17011 (x) (pH)	-
Cl 5.3.6, Table no 1 of IS 17011 (xi) (Phthalates (each individual phthalate))	-
Cl 5.3.6, Table no 1 of IS 17011 (xii) (Nickel, on skin contact)	-
Cl 5.2 (Design)	-
Cl 5.2.2, Table 4 (" Height of upper ")	-
Cl 5.2.3 (Heel area)	-
Cl 5.3.1.1 (Construction of whole footwear)	-
Cl 5.3.1.2 (Upper/outsole bond strength)	-
Cl 5.3.2.1 (Toe protection - general)	-
Cl 5.3.2.2 (Internal length)	-
Cl 5.3.2.3 (Width of toecap flange)	-
Cl 5.3.2.4.1 (Corrosion resistance of Class I footwear and hybrid mounted footwear)	-
Cl 5.3.2.4.2 (Corrosion resistance of Class II and hybrid moulded footwear)	-
Cl 5.3.2.5 (Behaviour of toecaps (thermal and chemical) of Corrosion resistance)	-
Cl 5.3.2.6 (Impact resistance)	-
Cl 5.3.2.7 (Compression resistance)	-
Cl 5.3.3 (Leak proofness)	-
Cl 5.3.4 ("Specific ergonomic features ")	-
Cl 5.3.7 (Seam strength)	-
Cl 5.4.1.1 (Class I footwear, determination of the area where upper requirements apply of Upper)	-
Cl 5.4.1.2 (Hybrid footwear, determination of the area where upper requirements apply of Upper)	-
Cl 5.4.2 (Thickness)	-
Cl 5.4.3 (Tear strength)	-
Cl 5.4.4, Table 11 (Tensile properties- Tensile strength)	-
Cl 5.4.4, Table 11 (Tensile properties- Breaking Force)	-
Cl 5.4.4, Table 11 (Tensile properties-Modulus at 100 % elongation)	-
Cl 5.4.4, Table 11 (Tensile properties- Elongation at break)	-
Cl 5.4.5 (Flexing resistance)	-
Cl 5.4.6 (Water vapour permeability and coefficient)	-
Cl 5.4.7 (Resistance to hydrolysis)	-
Cl 5.5.2 (Lining- Tear strength)	-
Cl 5.5.3 (Lining- Abrasion resistance)	-
Cl 5.5.4 (Lining-Water vapour permeability and coefficient)	-
Cl 5.6.2, Table 14 (Tear strength of tongue)	-
Cl 5.7.1 (Thickness of Insole, insock and footbed)	-
Cl 5.7.2 (Water permeability of insock)	-
Cl 5.7.3 (Water absorption and desorption of Insole, insock and footbed)	-
Cl 5.7.4.1 (Abrasion resistance of Insoles)	-
Cl 5.7.4.2 (Abrasion resistance of Insocks)	-
Cl 5.8.2.1, Table 15 (Thickness of Outsole)	-
Cl 5.8.2.2 (Cleated area)	-
Cl 5.8.2.3 (Cleat height)	-
Cl 5.8.3 (Outsole- Tear strength)	-
Cl 5.8.4 (Outsole- Abrasion resistance)	-
Cl 5.8.5 (Outsole-Flexing resistance)	-
Cl 5.8.6 (Outsole-Resistance to hydrolysis)	-
Cl 5.8.7 (Interlayer bond strength)	-
Cl 5.3.6, Table no 1 of IS 17011 (ix) (PCP-TeCP-TriCP polychlorophenols)	-

-
Mech- Except water resistance test (trough test), metatarsal protection. Quantity:- 6 Pairs shoes + 2 Toe caps(if metallic) + 5 Pairs Toe caps (if non -metallic)+ 1 slab of outsole (Size 200x200 mm of thickness 2.0+/-0.2 mm) for tear strength + 1 slab (size 200 x 200 mm of thickness 3.0+/- 0.2 mm) for Hydrolysis + Raw material + For multilayer outsole separate slab of outer layer of outsole to be provided for Abrasion Resistance test. Chem - Complete, Material declaration required for Innocuousness test.

7973

ELMEF TESTING & CALIBRATION LABORATORIES PVT. LTD, INDORE

8138926

IS 1554 : Part 1 (1988)

Specification for pvc insulated (Heavy Duty) electric cables: Part 1 for working voltages up to and including 1100 v (Third Revision)

PVC insulated ( Heavy Duty) Electric Cables

22500 View breakup
For BIS samples: Testing charges shall not exceed 1.5 times BIS Testing charges. For other: a) Single core unsheathe cable =Rs. 5500/- b) Single core sheathed cable = Rs. 6500/- c) Extra charges for FR cable = Rs. 11000/- d) Extra charges for FR LSH cable = Rs 14000/- e) Extra charges for armouring cable =Rs. 4000/- f) Extra charges for mining cable =Rs 1200/- g) separate wire before stranding =Rs 500/- h) Extra charges for each additional core = Rs. 1500/- i) Optional test (if required) = Rs. 800/- (15% discount to BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.2(INSULATION : Thickness of Insulation)	-	75	-
12.3.1(INNER SHEATH :Thickness of Inner Sheath)	-	75	-
13.3(Armouring : Dimensions -Wire Diameter)	-	78	-
13.5.1(ARMOURING : Resistance)	-	81	-
13.6 a)(ARMOURING: Tensile Strength)	-	78	-
13.6 b)(ARMOURING: Elongation )	-	78	-
13.1.2(Armouring: Coverage )	-	75	-
14.4.1(Thickness of Outer Sheath : Unarmowed Cables)	-	78	-
14.4.2(Thickness of Outer Sheath : Armoured Cables)	-	78	-
15.1 a) 1)(Tests on conductor : Annealing test ( for copper ))	-	78	-
15.1 a) 2)(Tensile test (for aluminium) - Before stranding )	-	78	-
15.1 a) 2)(Tensile test (for aluminium) - After stranding )	-	78	-
15.1 a) 3)(Tests on conductor : Wrapping test ( for aluminium ))	-	75	-
15.1 a) 4)(Tests on conductor : Conductor resistance test)	-	81	-
15.1 a) 4)(Resistance test - Neutral conductor )	-	81	-
15.1 d)1)(Phyaical tests for insulation : Tensile Test)	-	81	-
15.1 d)1)(Phyaical tests for insulation : Elongation )	-	81	-
15.1 d)1)(Physical tests for sheath : Tensile stregth )	-	81	-
15.1 d)1)(Physical tests for sheath : Elongation )	-	81	-
15.1 d)2)(Phyaical tests for insulation- Ageing in air Oven : Tensile Test)	-	2670	-
15.1 d)2)(Phyaical tests for insulation - Ageing in air oven : Elongation )	-	2670	-
15.1 d)2)(Physical tests for outer sheath -Ageing in air oven : Elongation )	-	2670	-
15.1 d)3)(Phyaical tests for insulation : Shrinkage )	-	2670	-
15.1 d)3)(Phyaical tests for Sheath : Shrinkage )	-	90	-
15.1 d)4)(Hot deformation : Insulation )	-	90	-
15.1 d)4)(Hot deformation : Sheath )	-	90	-
15.1 d)5)( Loss of mass in air oven- Insulation )	-	2670	-
15.1 d)5)( Loss of mass in air oven- sheath )	-	2670	-
15.1 d)6)(Heat shock test- Insulation )	-	90	-
15.1 d)6)(Heat shock test- sheath )	-	90	-
15.1 d)7)(Thermal stability- insulation )	-	81	-
15.1 d)7)(Thermal stability- Sheath )	-	81	-
15.1 e)(Insulation resistance test : Volume Resistivity )	-	156	-
15.1 e)(Insulation resistance test : IR Constant )	-	156	-
15.1 f)(High voltage test ( water immersion test ))	-	870	-
15.1 g)(High voltage test at room temperature)	-	870	-
15.4 a)(Cold bend test- Insulation ( Optional test))	-	177	-
15.4 a)(Cold bend test- Sheath ( Optional test))	-	177	-
15.4 b)(Cold impact test- Insulation ( Optional test))	-	177	-
15.4 b)(Cold impact test- Sheath ( Optional test))	-	177	-
16.4(Flammability Test)	-	75	-
16.5(Oxygen Index Test)	-	582	-
16.6(Flame Retardance Test on Single Cables)	-	75	-
16.7(Flame Retardance Test on Bunched Cables)	-	131	-
16.1(Temperature Index)	-	480	-
16.9(Test for Halogen Acid Gas Evolution)	-	183	-
13.6 g)(ARMOURING: Resistivity)	-	81	-
16.3.1(High Voltage Test ( Water Immersion Test ) : a.c. Test)	-	870	-
16.3.2(High Voltage Test ( Water Immersion Test ) : d.c. Test)	-	870	-
13.3(Armouring : Dimensions -Formed wire )	-	78	-

03 Jan, 2027

-
-

7974

ELMEF TESTING & CALIBRATION LABORATORIES PVT. LTD, INDORE

8138926

IS 694 (2010)

Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 450/750 v (Fourth Revision)

PVC INSULATED UNSHEATHED AND SHEATHED CABLE

14500 View breakup
a) Single core unsheathed Cable=Rs. 4000/- b) Single core sheathed cable = Rs. 5000/- c) Extra charges for outdoor use cable =Rs 3000/- d) Extra charges for low temp. use cable = Rs. 1200/- e) Extra charges for FR Cable = Rs. 8000/- f) Extra charges for FR-LSH cable = Rs. 10000/- g) Separate wire before stranding =Rs 500/- h) Extra charges for each additional core = Rs. 1500/- i) Rs. 900/- for copper purity test only [15% discount to BIS]

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.9(Additional ageing test (OU cables only) -HV test (at 60±3oC))	-	4223	-
10.4(Flammability test- Unaffected portion)	-	125	-
10.4(Flammability test-Burning after flame removal)	-	125	-
table 1 e) 3) (IR constant- max. Temp)	-	176	-
table 1 e) 3) (IR constant- Room temp )	-	176	-
table 1 e) 3) (Volume Resistivity - Maximum temp)	-	176	-
table 1 e) 3) (Volume Resistivity - Room temp )	-	176	-
10.2(HV (room temperature))	-	870	-
10.1(HV (water immersion))	-	870	-
10.8(Smoke density rating)	-	131	-
10.6(Halogen evolution)	-	181	-
10.7(Temperature index)	-	630	-
10.5(Oxygen index)	-	585	-
Table 1 iii) d) 9)(Cold impact for sheath)	-	102	-
Table 1 iii) d) 8)(Cold bend for sheath)	-	102	-
Table 1 iii) c) 9)(Cold impact for insulation)	-	102	-
Table 1 iii) c) 8)(Cold bend for insulation)	-	102	-
Table 1 iii) d) 7)(Thermal stability- Sheath )	-	81	-
Table 1 iii) c) 7)(Thermal stability- Insulation )	-	81	-
Table 1 iii) d) 6)(Hot deformation -Indentation depth - Sheath )	-	90	-
Table 1 iii) c) 6)(Hot deformation - Indentation depth- Insulation)	-	90	-
Table 1 iii) d) 5)(Heat shock-Sheath )	-	90	-
Table 1 iii) c) 5)(Heat shock-Insulation )	-	90	-
Table 1 iii) d) 4)(Shrinkage- Sheath )	-	90	-
Table 1 iii) c) 4)(Shrinkage-Insulation)	-	90	-
Table 1 iii) d) 2)(Loss of mass- Sheath )	-	2670	-
Table 1 iii) c) 2)(Loss of mass- Insulation )	-	2670	-
Table 1 iii) d) 3)(Sheath- Elongation (After ageing))	-	2670	-
Table 1 iii) c) 3)(Tensile strength (After ageing))	-	2670	-
Table 1 iii) c) 1)(Elongation (Without ageing))	-	81	-
Table 1 iii) c) 1)(Tensile strength (Without ageing))	-	81	-
8.3(Thickness of Sheath)	-	75	-
5.3(Thickness of Insulation)	-	75	-
10.11(Per sulphate test (for tinned Cu cable only))	-	125	-
4.2(Conductor resistance test)	-	81	-
4.1(Wrapping test (for Al))	-	75	-
4.1(Tensile test (for Al)- After Stranding)	-	81	-
4.1(Tensile test (for Al)-Before Stranding)	-	81	-
4.1(Annealing test (for copper))	-	81	-
(Cl.16.1) (Cl.19.1)(Conductor- Diameter )	-	75	-
Table 4(Copper purity test)	-	900	-
Table 1 iii) d) 3)(Sheath- Elongation variation)	-	2670	-
Table 1 iii) d) 3)(Sheath- TS variation)	-	2670	-
Table 1 iii) d) 3)(Sheath- Tensile strength (After ageing))	-	2670	-
Table 1 iii) d) 1)(Sheath- Elongation (Without ageing))	-	81	-
Table 1 iii) d) 1)(Sheath -Tensile strength (Without ageing))	-	81	-
Table 1 iii) c) 3)(Elongation variation)	-	2670	-
Table 1 iii) c) 3)(TS variation)	-	81	-
Table 1 iii) c) 3)(Elongation (After ageing))	-	2670	-
9(Overall dimensions)	-	75	-
7(BINDER TAPE)	-	75	-
6(FILLER)	-	75	-

03 Jan, 2027

-
-

7975

ELMEF TESTING & CALIBRATION LABORATORIES PVT. LTD, INDORE

8138926

IS 9537 : Part 3 (1983)

Specification for conduits for electrical installations: Part 3 rigid plain conduits of insulating meterials

PLAIN CONDUITS OF INSULATING METERIALS

10000 View breakup
For BIS samples: 1.5 times of BIS testing charges, for other: Rs. 10000/- (15% Discount to BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1.1(Maximum and minimum outside diameter of socket)	-	75	-
7.1.2(Maximum and minimum outside diameter of conduit)	-	75	-
7.4(Unifomity of The wall Thickness)	-	75	-
7.2(Minimum inside diameter of conduit)	-	75	-
9.2(Bending Test i) At Room Temp ii) At Low Temp (-5 ±2°C))	-	75	-
9.3(Compression Test as per caluse 9.3 of IS: 9537 (Part 1)-1980)	-	78	-
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	78	-
9.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	75	-
10(Resistance to Heat -Ball presure test)	-	75	-
11(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	75	-
12(Electrical Characteristics-Test for electric strength as per clause 12.1.1 of IS: 9537 (Part 1)-1980)	-	75	-
12(Electrical Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-	75	-
9.3(Compression Test at Full force applied (On load))	-	78	-
7.3(Length of conduit)	-	75	-
6.1(Marking)	-	75	-

03 Jan, 2027

-
-

7976

ELMEF TESTING & CALIBRATION LABORATORIES PVT. LTD, INDORE

8138926

IS 7098 : Part 1 (1988)

Specification for crosslinked polyethylene insulated pvc sheathed cables: Part 1 for working voltages up to and including 1100 volts (First Revision)

XLPE Insulated, PVC Sheathed Armored cable

22500 View breakup
a) Single core unsheathed Cable=Rs. 5500/- b) Single core sheathed cable = Rs. 6500/- c) Extra charges for FR Cable = Rs. 11000/- d) Extra charges for FR-LSH cable = Rs. 14000/- c) Extra charges for armouring cable =Rs 4000/- d) Extra charges for mining cable = Rs. 1200/- g) Separate wire before stranding =Rs 500/- h) Extra charges for each additional core = Rs. 1500/- i) Optional test (if required) = Rs. 800/- [15% discount to BIS]

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.2(Thickness of Insulation - Average)	-	75	-
9.3(Thickness of Insulation - Minimum)	-	75	-
13.1.2(Armouring: Coverage )	-	75	-
13.3(Armouring : Dimensions -Wire Diameter)	-	78	-
13.3(Armouring : Dimensions -Formed wire )	-	78	-
13.5(Armouring : Resistance Test)	-	81	-
13.6 a)(ARMOURING: Tensile Strength)	-	78	-
13.6 b)(ARMOURING: Elongation )	-	78	-
13.6 c)(ARMOURING: Torsion Test (For round wire ) )	-	78	-
13.6 d)(ARMOURING: Winding Test(For formed wire))	-	128	-
13.6 e)(ARMOURING: Uniformity of zinc coating)	-	125	-
13.6 f)(ARMOURING: Mass of zinc coating )	-	78	-
14.3(Thickness of outer sheath - AVERAGE)	-	75	-
14.3(Thickness of outer sheath - minimum)	-	75	-
15.1 a) i)(Annealing Test ( For copper wire ) )	-	78	-
15.1 a) ii)(Tensile test (for aluminium) - Before stranding )	-	78	-
15.1 a) ii)(Tensile test (for aluminium) - After stranding )	-	78	-
15.1 a) iii)(Wrapping test (for aluminium))	-	75	-
15.1 a) iv)(Resistance test - Main conductor)	-	81	-
15.1 a) iv)(Resistance test - Neutral conductor)	-	81	-
15.1 d) i) (Phyaical tests for insulation : Tensile Test)	-	81	-
15.1 d) i) (Phyaical tests for insulation : Elongation)	-	81	-
15.1 d) ii) (Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-	2670	-
15.1 e) ii) (Physical tests for outer sheath -Ageing in air oven : Elongation )	-	2670	-
15.1 d) iii) (Phyaical tests for insulation : Hot set )	-	90	-
15.1 d) iv) (Phyaical tests for insulation : Shrinkage )	-	90	-
15.1 e) iii) (Sheath: Loss of mass in air oven)	-	2670	-
15.1 d) v) (Insulation: Waterabsorption(gravimetric))	-	870	-
15.1 e) i) (Physical tests for outer sheath : Tensile stregth)	-	81	-
15.1 e) ii) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-	2670	-
15.1 e) iv) (Phyaical tests for Sheath : Shrinkage )	-	90	-
15.1 e) v) (Sheath : Hot deformation)	-	2670	-
15.1 e) vi) (Sheath : Heat shock test)	-	81	-
15.1 e) vii) (Sheath : Thermalstability)	-	156	-
15.1 f)(INSULATION RESISTANCE TEST : Volume resistivity )	-	1017	-
16.2(HIGH VOLTAGE TEST )	-	75	-
16.3(FLAMMABILITY TEST : Unaffected length )	-	582	-
16.9(Oxygen Index Test)	-	75	-
16.14(Temperature Index)	-	78	-
16.1(Flame Retardance Test on Single Cables)	-	131	-
16.11(Flame Retardance Test on Bunched Cables)	-	183	-
16.13(Test for Halogen Acid Gas Evolution)	-	480	-
13.6 g)(ARMOURING: Resistivity)	-	81	-
3(CONDUCTOR: MATERIALS)	-	78	-
12.1 & 12.2(Inner sheath : Application)	-	78	-
14.1(Outer Sheath : Application)	-	78	-
14.2(Colour of outer sheath)	-	81	-

03 Jan, 2027

-
-

7977

ELMEF TESTING & CALIBRATION LABORATORIES PVT. LTD, INDORE

8138926

IS 398 : Part 4 (1994)

Aluminium conductors for overhead transmission purposes: Part 4 aluminium alloy stranded conductors (Aluminium - Magnesium - Silicon Type) - Specification (Third Revision)

Aluminum Alloy Stranded conductor

1500 View breakup
Rs. 1500/- for 7 strands, Rs. 3700/- for 19 strands (15% discount to BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1 Table-1(Dimensional measurement of wires)	-	300	-
7.2.2 Table-2, Table-4(Calculated resistance of Stranded Conductor)	-	300	-
12.2 Table 1(Breaking Load Test- Before Stranding)	-	300	-
12.2 Table 1(Breaking Load Test- After Stranding)	-	300	-
12.3 Table 1(Elongation Test- Before Stranding)	-	300	-
12.3 Table 1(Elongation Test- After Stranding)	-	300	-
9.2 Table 3(Lay Ratio of stranded conductors)	-	300	-
9.2(Lay Ratio 3/6 wire layer)	-	300	-
9.2(Lay Ratio 12 wire layer)	-	300	-
9.2(Lay Ratio 18 wire layer)	-	300	-
9.2(Lay Ratio 24 wire layer)	-	300	-
6.1(Freedom from Defects)	-	300	-
8.1(Joints in wires-Conductors Containing Seven Wires)	-	300	-
8.2(Joints in wires-Conductors Containing More Than Seven Wires)	-	300	-
9.1(Stranding)	-	300	-
9.3(Direction of Lay)	-	300	-
9.4(Multiple layers of wires)	-	300	-

03 Jan, 2027

-
-

7978

ELMEF TESTING & CALIBRATION LABORATORIES PVT. LTD, INDORE

8138926

IS 14255 (1995)

Aertal bunched cables - For working voltages up to and including 1100 Volts - Specification

AERTAL BUNCHED CABLES

9900 View breakup
a) For one core = Rs 4400/- b) Extra Charges for each additional core = Rs. 1500/- c) Bare messenger conductor =Rs. 1000/- d) Separate wire before stranding =Rs 500/- e) Insulated messenger conductor =Rs. 1500/- f) Optional test (if Required)= Rs 800/- (15% Discount to BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.2( Thickness of insulation)	-	75	-
10.1 a) i)(Tests on phase/street light conductor: tensile test - Test method IS10810:Part 2)	-	78	-
10.1 a) ii)(Wrapping test - 10810: Part 3)	-	75	-
10.1 b) i)(Test on messenger conductor: Breaking load - IS 10810: Part 2)	-	78	-
10.1 b) ii)(Test on messenger conductor: Elongation test - Cl 11.3)	-	78	-
10.1 b) iii)(Test on messenger conductor: Resistance test - IS 10810: Part 5)	-	78	-
10.1 c) i)(Physical tests for XLPE Insulation: Tensile strength - IS 10810: Part 7)	-	78	-
10.1 c) i)(Physical tests for XLPE Insulation: elongation at break - IS 10810: part 7)	-	78	-
10.1 c) ii)(Ageing in air oven : Tensile strength variation - IS 10810:Part 11)	-	2670	-
10.1 c) ii)(Ageing in air oven : Elongation variation- IS 10810: Part 11)	-	2670	-
10.1 c) iii)(Hot set test: Elongation under load - IS 10810: Part 30)	-	2670	-
10.1 c) iii)(Hot set test: Permanent elongation (set) after cooling - IS 10810: Part 30)	-	2670	-
10.1 c) iv)(Shrinkage test : Shrinkage - 10810:Part 12)	-	165	-
10.1 c) v)(Water ahsorption (Gravimetric) - IS 10810: Part 33 )	-	5475	-
10.1 f)(Insulation resistance (Volume resistivity) test a) volume resistivity at 27°C - IS 10810: Part 43)	-	153	-
10.1 f)(Insulation resistance (Volume resistivity) test b) volume resistivity at 70°C - IS 10810: Part 43)	-	153	-
10.1 g)(High voltage test - IS10810:Part 45)	-	153	-
11.4(Bending Test on the Completed Cable ( Optional) )	-	75	-

03 Jan, 2027

-
Only XLPE insulation

7979

ELMEF TESTING & CALIBRATION LABORATORIES PVT. LTD, INDORE

8138926

IS 398 : Part 1 (1996)

Aluminium conductors for overhead transmission purposes - Specification: Part 1 aluminium stranded conductors (Third Revision)

Aluminium conductor for overhead Transmission purpose

1500 View breakup
Rs. 1500/- for 7 strands, Rs. 3700/- for 19 strands (15% Discount to BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12.2, Table-1(Measurement of diameter of individual aluminium wire)	-	300	-
12.3, Table-1(Breaking load before stranding)	-	300	-
12.3, Table-1(Breaking load after stranding)	-	300	-
12.4(Wrapping test)	-	300	-
12.5, Table 1(Resistance test)	-	300	-
12.6, Table 3(Measurement of lay ratio)	-	300	-
6(Freedom from defects)	-	300	-
7.2.1(Sizes)	-	300	-
7.1.1(Nominal Sizes)	-	300	-
7.2.2(Resistance)	-	300	-
8, 8.1, 8.2(Joint in wires, except during stranding)	-	300	-
9.3(Stranding)	-	300	-
9.2(Lay ratio)	-	300	-
9.4(Multiple layer of wires)	-	300	-

03 Jan, 2027

-
-

7980

ELMEF TESTING & CALIBRATION LABORATORIES PVT. LTD, INDORE

8138926

IS 398 : Part 2 (1996)

Aluminium conductors for overhead transmission purposes - Specification: Part 2 aluminium conuuctors, galvanized steel - Reinforced (Third Revision)

Aluminium Conductor Galvanized steel reinforced

7900 View breakup
For BIS samples: 1.5 times of BIS testing charges, for other: Rs. 7900/- (15% Discount to BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1.1 & 13.2 Table-1 (mech)(Diameter of Aluminium Wires Before Stranding)	-	304	-
8.1.1 & 13.2 Table 2 (mech)(Diameter of Steel Wires Before Stranding)	-	304	-
8.1.1 & 13.2 Table-1 (mech)(Diameter of Aluminium Wires After Stranding)	-	304	-
8.1.1 & 13.2 Table 2 (mech)(Diameter of Steel Wires After Stranding)	-	304	-
13.3 Table 1 (mech)(Breaking Load of Aluminium Wires Before Stranding)	-	304	-
13.3 Table 2 (mech)(Breaking Load of Steel Wires Before Stranding)	-	304	-
13.3 Table 1 (mech)(Breaking Load of Aluminium Wires After Stranding)	-	304	-
13.3 Table 2 (mech)(Breaking Load of Steel Wires After Stranding)	-	304	-
13.4.1 (mech)(Ductility by Torsion Test before stranding)	-	304	-
13.4.1 (mech)(Ductility by Torsion Test before stranding)	-	304	-
13.4.1 (mech)(Ductility by Torsion Test after stranding)	-	304	-
13.4.2 (elec)(Ductility by Elongation Test before stranding)	-	304	-
13.4.2 (elec)(Ductility by Elongation Test after stranding)	-	304	-
13.5.1 (mech)(Wrapping Test Aluminium Wires Before Stranding)	-	304	-
13.5.1 (mech)(Wrapping Test Aluminium Wires After Stranding)	-	304	-
13.5.2 (mech)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	304	-
13.5.2 (mech)(Wrapping Test Galvanized Steel Wires After Stranding)	-	304	-
13.6 (elec)(Resistance test-Aluminium wire before Stranding)	-	304	-
13.6 (elec)(Resistance test-Aluminium wire after stranding)	-	303	-
13.7.2 (chem)(Mass of Zinc coating)	-	304	-
13.7.2 (chem)(Uniformity of Zinc coating)	-	304	-
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Outermost Layer)	-	304	-
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	304	-
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	304	-
13.8 Table-4 (mech)(Lay Ratio- Steel Core (6 Wire Layer))	-	304	-
13.10 (elec)(Ultimate breaking load)	-	304	-
7(FREEDOM FROM DEFECTS)	-	304	-
9(Joint in wires)	-	304	-
14.2(a), 8.2.1(Sizes)	-	304	-
13.9 (elec)(Surface condition test)	-	0	-
13.11 (elec)(Stress-strain test)	-	0	--

03 Jan, 2027

-
Restricted for conductor size below 100 mm2

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number

No Record Found