BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15239 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

8461

BIS, Central Laboratory (CL)

None

IS 302 : Part 2 : Sec 15 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 15 appliances for heating liquids (First Revision)

14655 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6 (Classification- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.3 (Marking- IS 302-1)	-
7.4 (Marking- IS 302-1)	-
7.5 (Marking- IS 302-1)	-
7.6 (Marking- IS 302-1)	-
7.7 (Marking- IS 302-1)	-
7.1O (Marking- IS 302-1)	-
7.11 (Marking- IS 302-1)	-
7.12 (Marking- IS 302-2-15)	-
7.13 (Marking- IS 302-1)	-
7.14 (Marking- IS 302-1)	-
7.15 (Marking- IS 302-1)	-
7.101 (Marking- IS 302-2-15)	-
8 (Protection Against Electric Shock, IS 302-1)	-
10 (Power Input and Current, IS 302-1)	-
11 (Heating, IS 302-1)	-
11 (Heating, IS 302-1)	-
11 (Heating, IS 302-1)	-
11 (Heating, IS 302-1)	-
13 (Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-
13 (Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-
15.1 (Moisture Resistance, IS 302-1)	-
15.2 (Spillage test as 15.2, IS 3.02-1 & 302-2-15)	-
15 (MOISTURE RESISTANCE)	-
16 (Leakage current as per Cl 16, IS 302-1)	-
16 (electric strength as per Cl 16, IS 302-1)	-
19.13 (Abnormal Operation as per Cl 19, IS 302-2-15)	-
19.13 (Abnormal Operation as per Cl 19, IS 302-1)	-
19.13 (Abnormal Operation as per Cl 19, IS 302-1)	-
19.13 (Abnormal Operation as per Cl 19, IS 302-1)	-
20 (STABILITY AND MECHANICAL HAZARDS)	-
21 (MECHANICAL STRENGTH)	-
22 (CONSTRUCTION)	-
22.7 (Construction as per Cl 22.7, IS 3.02-2-15)	-
22.107 (Construction as per Cl 22.7, IS 3.02-2-15)	-
22.108 (Construction as per Cl 22.8, IS 3.02-2-15)	-
22.106 (Interlocks)	-
23.1 (Internal Wiring, IS 302-1)	-
23.2 (Internal Wiring, IS 302-1)	-
23.4 (Internal Wiring, IS 302-1)	-
23.6 (Internal Wiring, IS 302-1)	-
23.7 (Internal Wiring, IS 302-1)	-
23.8 (Internal Wiring, IS 302-1)	-
24 (COMPONENTS)	-
25.1 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.5 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.6 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.8 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.1 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.11 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.14 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.15 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.17 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.18 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.19 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.2 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.22 (Supply Connection and External Flexible Cords, IS 302-1)	-
26 (Terminals for External Conductors, IS 302-1)	-
27.1 (Provision for Earthing, IS 302-1)	-
27.2 (Provision for Earthing, IS 302-1)	-
27.5 (Provision for Earthing, IS 302-1)	-
28 (Screws & Connections, IS 302-1)	-
29.1 (Clearances, Creepage distances and Solid Insulation, IS 302-1)	-
29.2 (Clearances, Creepage distances and Solid Insulation, IS 302-1)	-
30.1 (Resistance to Heat and Fire, IS 302-1)	-
30.2 (Resistance to Heat and Fire, IS 302-1)	-
31 (Resistance of Rusting, IS 302-1)	-

-
Complete for 1. Electric Kettles ,2. Feeding bottle Heater, 3. cooking pan, 4. Milk Heater, 5. steam Cooker, 6. Coffee maker, Except electronic circuit type appliances(Cl.19.11 of IS 302 part 1)

8462

Electronics Test & Development Centre - ETDC (STQC), Goa

6180624

ER 01 (2024)

Essential Requirement (s) for Security of CCTV

275000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1.1(Application Debug Interface Protection)	-	9167	-
1.2(Device Unique Crypto Keys)	-	9167	-
1.3(On-Chip Debug Interface Protection)	-	9167	-
1.4(Trusted Execution)	-	9167	-
1.5(Secure Storage)	-	9167	-
1.6(Tamper Protection)	-	9167	-
1.7(IP Protection)	-	9167	-
1.8(Boot Image Validation)	-	9167	-
1.9(Secure PRNG Usage)	-	9167	-
2.1(Memory Protection Controls)	-	9167	-
2.2(Data Transit Security)	-	9167	-
2.3(Server Connection Validation)	-	9167	-
2.4(Banned C Functions)	-	9167	-
2.5(Software Bill of Materials)	-	9167	-
2.6(Secure Code Review)	-	9167	-
2.7(Digital Signature Pinning)	-	9167	-
2.8(Reverse Engineering Protection)	-	9167	-
2.9(Update Process Security)	-	9167	-
2.10(Code Signing Verification)	-	9167	-
2.11(Firmware Downgrade Protection)	-	9167	-
2.12(Scheduled Firmware Updates)	-	9167	-
3.1(Wireless Mutual Authentication)	-	9167	-
3.2(Wireless Encrypted Channel)	-	9167	-
3.3(Trusted Supply Chain)	-	9167	-
3.4(Supply Chain Risk Management)	-	9167	-
3.5(Proprietary Protocols Management)	-	9167	-
4.1(Anti-Counterfeit Measures)	-	9167	-
4.2(Threat Mitigation)	-	9167	-
4.3(Malware Detection Deployment)	-	9167	-
4.4(Supply Chain Risk Assessment)	-	9167	-

-
-

8463

KC INDIA TEST LABORATORIES LLP, GHAZIABAD

9140406

IS 1293 (2019)

Plugs and socket - Outlets of rated Voltage up to and including 250 Volts and rated current up to and including 16 amperes - Specification (Third Revision)

Upto and including 16A

9500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(RATINGS)	-	150	NIL
7.1.1(Accessories Classification)	-	150	NIL
7.1.2(Accessories Classification)	-	150	NIL
7.1.3(Accessories Classification)	-	150	NIL
7.1.4(Accessories Classification)	-	150	NIL
7.1.5(Accessories Classification)	-	150	NIL
7.2.1(Socket-Outlets Classification)	-	150	NIL
7.2.2(Socket-Outlets Classification)	-	150	NIL
7.2.3(Socket-Outlets Classification)	-	150	NIL
7.2.4(Socket-Outlets Classification)	-	150	NIL
7.3(Plug Classification)	-	150	NIL
8(Marking)	-	150	NIL
9(CHECKING OF DIMENSIONS)	-	500	NIL
10(PROTECTION AGAINST ELECTRIC SHOCK)	-	400	NIL
11(Provision for earthing)	-	400	NIL
12(terminals)	-	500	NIL
13.1(Construction of fixed Socket Outlets)	-	800	NIL
13.2(Construction of fixed Socket Outlets)	-	800	NIL
13.3(Construction of fixed Socket Outlets)	-	800	NIL
13.4(Construction of fixed Socket Outlets)	-	800	NIL
13.5(Construction of fixed Socket Outlets)	-	800	NIL
13.6(Construction of fixed Socket Outlets)	-	800	NIL
13.7(Construction of fixed Socket Outlets)	-	800	NIL
13.8(Construction of fixed Socket Outlets)	-	800	NIL
13.9(Construction of fixed Socket Outlets)	-	800	NIL
13.10(Construction of fixed Socket Outlets)	-	800	NIL
13.11(Construction of fixed Socket Outlets)	-	800	NIL
13.12(Construction of fixed Socket Outlets)	-	800	NIL
13.13(Construction of fixed Socket Outlets)	-	800	NIL
13.14(Construction of fixed Socket Outlets)	-	800	NIL
13.15(Construction of fixed Socket Outlets)	-	800	NIL
13.16(Construction of fixed Socket Outlets)	-	800	NIL
13.17(Construction of fixed Socket Outlets)	-	800	NIL
13.18(Construction of fixed Socket Outlets)	-	800	NIL
13.19(Construction of fixed Socket Outlets)	-	800	NIL
13.2(Construction of fixed Socket Outlets)	-	800	NIL
13.21(Construction of fixed Socket Outlets)	-	800	NIL
13.22(Construction of fixed Socket Outlets)	-	800	NIL
13.23(Construction of fixed Socket Outlets)	-	800	NIL
14.1(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	800	NIL
14.2(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	800	NIL
14.3(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	800	NIL
14.4(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	800	NIL
14.5(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	800	NIL
14.6(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	800	NIL
14.7(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	800	NIL
14.8(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	800	NIL
14.9(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	800	NIL
14.10(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	800	NIL
14.11(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	800	NIL
14.12(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	800	NIL
14.13(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	800	NIL
14.14(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	800	NIL
14.15(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	800	NIL
14.16(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	800	NIL
14.17(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	800	NIL
14.18(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	800	NIL
14.19(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	800	NIL
14.20(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	800	NIL
14.21(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	800	NIL
14.22(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	800	NIL
14.23(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	800	NIL
14.24(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	800	NIL
14.25(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	800	NIL
14.26(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	800	NIL
15(INTERLOCKED SOCKET-OUTLETS)	-	400	NIL
16.1(Resistance to Ageing)	-	500	NIL
16.2(RESISTANCE TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	500	NIL
16.3(Resistance to Humidity)	-	500	NIL
17.1(RESISTANCE AND ELECTRIC STRENGTH)	-	700	NIL
17.2(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	700	NIL
17.3(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	700	NIL
18(OPERATION OF EARTHING CONTACTS)	-	700	NIL
19(TEMPERATURE RISE)	-	1000	NIL
20(Making & Breaking Capacity)	-	1500	NIL
21(Normal Operation)	-	2500	NIL
22.1(Verification of the Maximum Withdrawal Force)	-	150	NIL
22.2(Verification of Minimum Withdrawal Force)	-	150	NIL
23.1(FLEXIBLE CABLES AND THEIR CONNECTION)	-	150	NIL
23.2(FLEXIBLE CABLES AND THEIR CONNECTION)	-	150	NIL
23.3(FLEXIBLE CABLES AND THEIR CONNECTION)	-	150	NIL
23.4(FLEXIBLE CABLES AND THEIR CONNECTION)	-	150	NIL
24.1(MECHANICAL STRENGTH For all kinds of fixed socketoutlets)	-	150	NIL
24.1(MECHANICAL STRENGTH For portable multiple and combined socket outlets with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	150	NIL
24.1(MECHANICAL STRENGTH For surface mounting boxes)	-	150	NIL
24.2(MECHANICAL STRENGTH For portable single socket-outlets: 1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	150	NIL
24.2(MECHANICAL STRENGTH For portable multiple and combined socket outlets: 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	150	NIL
24.2(MECHANICAL STRENGTH For plug 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	150	NIL
24.2(MECHANICAL STRENGTH For plug 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	150	NIL
24.3(MECHANICAL STRENGTH for fixed socket-outlets with a main part intended to be mounted directly on a surface)	-	150	NIL
24.4(MECHANICAL STRENGTH For portable single socket-outlets: 1) with enclosures, covers or bodies of thermoplastic or elastomeric material)	-	150	NIL
24.4(MECHANICAL STRENGTH For portable multiple and combined socket outlets: 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	150	NIL
24.5(MECHANICAL STRENGTH For portable single socket-outlets: 1) with enclosures, covers or bodies of thermoplastic or elastomeric material)	-	150	NIL
24.5(MECHANICAL STRENGTH For portable multiple and combined socket outlets: 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	150	NIL
24.5(MECHANICAL STRENGTH For Plug 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	150	NIL
24.6(MECHANICAL STRENGTH For screwed glands of accessories having an IP code higher than IP20)	-	150	NIL
24.7(MECHANICAL STRENGTH For plug pins provided with insulating sleeves)	-	150	NIL
24.8(MECHANICAL STRENGTH For shuttered socketoutlets)	-	150	NIL
24.9(MECHANICAL STRENGTH For portable multiple and combined socket outlets (1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	150	NIL
24.9(MECHANICAL STRENGTH For portable multiple and combined socket outlets (1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	150	NIL
24.10(MECHANICAL STRENGTH For Plug (1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	150	NIL
24.10(MECHANICAL STRENGTH For Plug (1) with enclosures, covers or bodies of thermoplastic or elastomeric material)	-	150	NIL
24.11(MECHANICAL STRENGTH For portable socketoutlets having means for suspension on a wall)	-	150	NIL
24.12(MECHANICAL STRENGTH For portable socketoutlets having means for suspension on a wall)	-	150	NIL
24.13(MECHANICAL STRENGTH For portable socketoutlets having means for suspension on a wall)	-	150	NIL
24.14.1(MECHANICAL STRENGTH For fixed socket-outlets)	-	150	NIL
24.14.2(MECHANICAL STRENGTH For fixed socket-outlets)	-	150	NIL
24.14.3(MECHANICAL STRENGTH For plugs and portable socketoutlets)	-	150	NIL
24.15(MECHANICAL STRENGTH)	-	150	NIL
24.16(MECHANICAL STRENGTH)	-	150	NIL
24.16(MECHANICAL STRENGTH For shroud of portable socket-outlets)	-	150	NIL
25.1(Resistance to heat)	-	250	NIL
25.2(Resistance to heat)	-	250	NIL
25.3(Resistance to heat)	-	250	NIL
25.4(Resistance to heat)	-	250	NIL
26.1(SCREWS, CURRENTCARRYING PARTS AND CONNECTIONS)	-	100	NIL
26.2(SCREWS, CURRENTCARRYING PARTS AND CONNECTIONS)	-	100	NIL
26.3(SCREWS, CURRENTCARRYING PARTS AND CONNECTIONS)	-	100	NIL
26.4(SCREWS, CURRENTCARRYING PARTS AND CONNECTIONS)	-	100	NIL
26.5(SCREWS, CURRENTCARRYING PARTS AND CONNECTIONS)	-	100	NIL
26.6(SCREWS, CURRENTCARRYING PARTS AND CONNECTIONS)	-	100	NIL
26.7(SCREWS, CURRENTCARRYING PARTS AND CONNECTIONS)	-	100	NIL
27.1(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	100	NIL
27.2(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	100	NIL
27.3(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	100	NIL
28.1.1(Glow-Wire Test)	-	500	NIL
28.2(Resistance to Tracking)	-	500	NIL
29(Resistance to Rusting)	-	500	NIL
30.1(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Pressure Test at High Temperature)	-	500	NIL
30.2(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Static Damp Heat Test)	-	500	NIL
30.3(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Tests at Low Temperature)	-	500	NIL
30.4(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Impact Test at Low Temperature)	-	500	NIL

06 Jun, 2027

-
-

8464

Ahmedabad Textile Industry's Research Association (ATIRA), Ahmedabad

7173002

IS 17357 (2020)

Agro textiles – Harvest nets for agriculture and horticulture purposes - Specification

22410 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause No. 4.1(HDPE Monofilament density)	-	500	-
Clause No. 4.1.1(Heat Shrinkage at 60 and 95℃)	-	2000	-
Clause No. 5.1(Width of the Fabric)	-	200	-
Clause No. 6.1(Dimensions and Mass)	-	600	-
Clause No. 6.2 (i)(Mass g/m²)	-	450	-
Clause No. 6.2 (ii)(Average breaking strength of wind shield net fabric (Strip method, 325×50 mm test piece with gauge length of 200 mm))	-	900	-
Clause No. 6.2 (iii)(Retention of breaking strength after UV exposure of 144 h)	-	13860	-
Clause No. 6.2 (iv)(Colour fastness to artificial light)	-	1650	-
Clause No. 6.2 (v)(Bursting pressure, kgf/cm2)	-	800	-
Clause No. 6.2 (vi)(Air permeability in mm/sec at 50 pascal water head pressure)	-	650	-
4.1(MATERIALS - HDPE Monofilament)	-	0	-
5.1(MANUFACTURE - Fabric)	-	200	-
5.2(MANUFACTURE - Colour)	-	200	-
5.3(MANUFACTURE - Fixing of Eyelets)	-	400	-
6.1(REQUIREMENTS - The harvest nets shall be made to the dimensions)	-	0	-
6.2-Table 1- i)(REQUIREMENTS - Mass g/m2)	-	0	-
6.2-Table 1- ii)(REQUIREMENTS - Average breaking strength of harvest net fabric (strip method, 325×50 mm test piece with gauge length of 200 mm), N a) Warpway b) Weftway)	-	0	-
6.2-Table 1- iii)(REQUIREMENTS - Retention of breaking strength after UV exposure of 144 h, percent)	-	0	-
6.2-Table 1- iv)(REQUIREMENTS - Colour fastness to artificial light)	-	0	-
6.2-Table 1- v)(REQUIREMENTS - Bursting pressure, kgf/cm2)	-	0	-
6.2-Table 1- vi)(REQUIREMENTS - Air permeability in mm/sec at 50 pascal water head pressure)	-	0	-

-
Included w.e.f 12.03.2025 Exclusion : Clause 7.1 (Length of the monofilament harvest nets)

8465

Electronics Test and Development Centre - ETDC (STQC), Pune

7181624

ER 01 (2024)

Essential Requirement (s) for Security of CCTV

275000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1.1(Application Debug Interface Protection)	-	9167	Cost can be updated without notice
1.2(Device Unique Crypto Keys)	-	9167	Cost can be updated without notice
1.3(On-Chip Debug Interface Protection)	-	9167	Cost can be updated without notice
1.4(Trusted Execution)	-	9167	Cost can be updated without notice
1.5(Secure Storage)	-	9167	Cost can be updated without notice
1.6(Tamper Protection)	-	9167	Cost can be updated without notice
1.7(IP Protection)	-	9167	Cost can be updated without notice
1.8(Boot Image Validation)	-	9167	Cost can be updated without notice
1.9(Secure PRNG Usage)	-	9167	Cost can be updated without notice
2.1(Memory Protection Controls)	-	9167	Cost can be updated without notice
2.2(Data Transit Security)	-	9167	Cost can be updated without notice
2.3(Server Connection Validation)	-	9167	Cost can be updated without notice
2.4(Banned C Functions)	-	9167	Cost can be updated without notice
2.5(Software Bill of Materials)	-	9167	Cost can be updated without notice
2.6(Secure Code Review)	-	9167	Cost can be updated without notice
2.7(Digital Signature Pinning)	-	9167	Cost can be updated without notice
2.8(Reverse Engineering Protection)	-	9167	Cost can be updated without notice
2.9(Update Process Security)	-	9167	Cost can be updated without notice
2.10(Code Signing Verification)	-	9167	Cost can be updated without notice
2.11(Firmware Downgrade Protection)	-	9167	Cost can be updated without notice
2.12(Scheduled Firmware Updates)	-	9167	Cost can be updated without notice
3.1(Wireless Mutual Authentication)	-	9167	Cost can be updated without notice
3.2(Wireless Encrypted Channel)	-	9167	Cost can be updated without notice
3.3(Trusted Supply Chain)	-	9167	Cost can be updated without notice
3.4(Supply Chain Risk Management)	-	9167	Cost can be updated without notice
3.5(Proprietary Protocols Management)	-	9167	Cost can be updated without notice
4.1(Anti-Counterfeit Measures)	-	9167	Cost can be updated without notice
4.2(Threat Mitigation)	-	9167	Cost can be updated without notice
4.3(Malware Detection Deployment)	-	9162	Cost can be updated without notice
4.4(Supply Chain Risk Assessment)	-	9162	Cost can be updated without notice

21 Oct, 2027

-
-

8466

CIPET, Madurai

6139834

IS 12786 (2024)

Irrigation equipment - Polyethylene pipes for irrigation laterals - Specification (first revision)

12-32 mm

13700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(Material)	-	1050	25% Discount on Testing charges for BIS
Cl-4.2(Carbon content of finished PE lateral pipe)	-	925	25% Discount on Testing charges for BIS
Cl-5.1(Dimensions of pipes and wall thicknesses)	-	500	For all dimensions 25% Discount on Testing charges for BIS
Cl-6.0(Visual Appearance)	-	500	25% Discount on Testing charges for BIS
Cl-7.1(Hydraulic Characteristics- Internal pressure creep rupture test)	-	1000	25% Discount on Testing charges for BIS
Cl-7.1(Hydraulic Characteristics- quality acceptance test)	-	3000	25% Discount on Testing charges for BIS
Cl-7.2(Reversion Test)	-	700	Sample Preparation : Rs. 500/- +25% Discount on Testing charges for BIS
Cl-7.3(Tensile Test)	-	1300	Sample Preparation : Rs. 500/- + 25% Discount on Testing charges for BIS
Cl-7.3.1(Test Piece)	-	0	-
Cl-7.3.2(Procedure)	-	0	-
Cl-7.4(Susceptibility to Environmental Stress Cracking)	-	1200	25% Discount on Testing charges for BIS
Cl-8.0(Supply of pipes)	-	0	-
Cl-9.0(Coiling)	-	500	25% Discount on Testing charges for BIS
Cl-10.0(Sampling and criteria for conformity)	-	0	-
Cl-11(Marking)	-	0	-
3(Class of Pipe)	-	0	-
5.1 & Table 1(Dimensions of Pipes - Outside diameters)	-	500	25% Discount on Testing charges for BIS
5.1 & Table 1(Dimensions of Pipes - Wall thickness)	-	500	25% Discount on Testing charges for BIS
6(Visual Appearance)	-	250	25% Discount on Testing charges for BIS
7.1 & Table 2(Hydraulic Characteristics)	-	1000	25% Discount on Testing charges for BIS
7.1 & Table 2(Hydraulic Characteristics)	-	3000	25% Discount on Testing charges for BIS
7.2(Reversion Test)	-	700	Sample Preparation : Rs. 500/- + 25% Discount on Testing charges for BIS
7.3(Tensile Strength)	-	1300	Sample Preparation : Rs. 500/- + 25% Discount on Testing charges for BIS
7.3(Elongation at Break)	-	0	Including tensile strength and elongation 25% Discount on Testing charges for BIS
7.4(SusceptibiIity to Environmental Stress Cracking)	-	1200	25% Discount on Testing charges for BIS
4.2(a)(Carbon Black Content-IS 2530)	-	925	25% Discount on Testing charges for BIS
4.2(b)(Carbon Black Dispersion-IS 2530)	-	700	25% Discount on Testing charges for BIS

22 May, 2027

-
Included w.e.f. 07.10.2024

8467

TUV Rheinland (India) Pvt. Ltd (6126126), Bengaluru

6126126

IS 18297 (2023)

Cabinet Hinges

26000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Type & Size)	-	0	-
4.1(Type (a) Full Overlay (Fig-1))	-	0	-
4.2((b) Half Overlay (Fig-2))	-	0	-
4.1((b) Half Overlay (Fig-2))	-	0	-
4.1(c) Inset (Fig-2))	-	0	-
4.2(Size (Fig-2))	-	0	-
4.3(Manufacture & Purchaser)	-	0	-
5(Material (IS 18297))	-	0	-
6 Table 1(Manufacture(IS: 18297))	-	0	-
7.1(General Test Requirement (IS: 18297))	-	0	-
7.1.1(Preparatory Measures (IS:18297))	-	0	-
7.1.2(Limiting Deviations (IS:18297))	-	0	-
7.1.3(Application of Force (IS: 18297))	-	0	-
7.1.4(Sequence of Testing (IS 18297))	-	0	-
7.1.5.1(Mass (IS:18297))	-	0	-
7.1.5.2((i) Face withdrawal of Screws (IS: 2380 P-14))	-	0	-
7.1.5.2((ii) Density (IS 2380 P-3))	-	0	-
7.2(Over Load Test (IS 18297))	-	0	-
7.2.1(Overload Test - Vertical Static overload test)	-	1500	10% Discount to BIS
7.2.2(Overload Test - Horizontal Static overload test)	-	1500	10% Discount to BIS
Cabinet Hinges(Functional Test (IS: 18297))	-	0	-
Cabinet Hinges(Functional Test (IS: 18297))	-	0	-
7.3.2(First Vertical Static Load test (IS 18297))	-	1500	10% Discount to BIS
7.3.3(First Horizontal Static Load test (IS 18297))	-	1500	10% Discount to BIS
7.3.4(Slam shut test (IS 18297))	-	3000	10% Discount to BIS
7.3.6(Durability Test (IS 18297))	-	12000	10% Discount to BIS
7.3.7(Deflection Test (IS 18297))	-	2000	10% Discount to BIS
7.3.8(Second Vertical Static Test (IS 18297))	-	1500	10% Discount to BIS
7.3.9(Second Horizontal Static Test (IS: 18297))	-	1500	10% Discount to BIS
7.4(Crrosion Resistance (IS 18297))	-	6000	10% Discount to BIS
7.5(Finish (IS: 18297))	-	0	-
7.3.1(Operating Forces)	-	0	-

17 Feb, 2028

-
Included w.e.f 14.01.2025

8468

TUV Rheinland (India) Pvt. Ltd (6126126), Bengaluru

6126126

IS 17954 (2023)

TELESCOPIC BALL BEARING DRAWER SLIDE SPECIFICATION

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.2, Table- 2 (i)(Internal channel)	-	0	-
Cl-4.2, Table- 2 (ii)(Outer channel)	-	0	-
Cl-4.2, Table- 2 (iii)(Track up to 550 mm)	-	0	-
Cl-4.2, Table- 2 (iv)(Track from 600 mm onwards)	-	0	-
Cl-4.2, Table- 2 (v)(Ball cage)	-	0	-
Cl-4.2, Table- 2 (vi)(Ball spacer)	-	0	-
Cl-5(Components and Manufacture)	-	0	-
Cl-5(Components and Manufacture)	-	0	-
Cl-6.1(Preparatory Measures)	-	0	-
Cl-6.2 (a)(Limiting Deviations- Force)	-	0	-
Cl-6.2 (b)(Limiting Deviations- Speed)	-	0	-
Cl-6.2 (c)(Limiting Deviations- Weights)	-	0	-
Cl-6.2 (d)(Limiting Deviations- Dimension)	-	0	-
Cl-6.3(Application of Forces)	-	0	-
Cl-6.4(Testing Equipment)	-	0	-
Cl-6.5(Sequence of testing)	-	0	-
Cl-7(Vertical Load Test)	-	2000	10 % Discount to BIS
Cl-8(Horizontal Load Test)	-	2000	10 % Discount to BIS
Cl-9(Durability Test)	-	13000	10 % Discount to BIS
Cl-10(Deflection Test)	-	2000	10 % Discount to BIS
Cl-11(Slam Test)	-	3000	10 % Discount to BIS
Cl-12(Finish)	-	6000	10 % Discount to BIS
Cl-5.11(Ball)	-	0	-
Cl-5.10(Rivets)	-	0	-

17 Feb, 2028

-
Included w.e.f 14.01.2025

8469

CIPET, Madurai

6139834

IS 14333 (2022)

Polyethylene Pipes for Sewerage and Industrial Chemicals and Effluent ï¿½ Specification (First Revision)

32-315 mm

31569 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2.1,T2("Base Density (At 27°C Temp.)-IS 7328:2020 ")	-	700	25% Discount for BIS on Testing Charges Only
5.2.1,T2(Melt Flow Rate (At 190°C /5kg)-IS 2530:1963)	-	1100	25% Discount for BIS on Testing Charges Only
5.2.1,T2(Thermal Stability(Oxidation Induction Time)-IS 4984:2016(Annexure-B))	-	2200	25% Discount for BIS on Testing Charges Only
5.2.1,T2("Volatile Matter- IS 4984:2016 (Annexure-C)")	-	700	25% Discount for BIS on Testing Charges Only
5.2.1,T2("Water Content-IS 4984:2016 (Annexure-D)")	-	700	25% Discount for BIS on Testing Charges Only
5.2.1.1, T2(Compound Density-IS 7328:2020)	-	700	25% Discount for BIS on Testing Charges Only
5.2.1.1, T2("Compound carbon black -IS 2530:1963 content")	-	925	25% Discount for BIS on Testing Charges Only
5.2.1.1, T2(Compound Toluene extract - Any Method)	-	700	25% Discount for BIS on Testing Charges Only
5.2.1.1, T2(Compound maximum volatile matter -IS 4984:2016 (Annexure-C))	-	700	25% Discount for BIS on Testing Charges Only
5.2.1.1, T2(Compound carbon black particle size- Any Method)	-	700	25% Discount for BIS on Testing Charges Only
5.2.1.1, T2(Compound ash content - Any Method)	-	1200	25% Discount for BIS on Testing Charges Only
5.2.1.1, T2("Compound carbon black -IS 2530:1963 dispersion")	-	925	25% Discount for BIS on Testing Charges Only
5.3(Density of Higher olefin - IS 7328:2020)	-	700	25% Discount for BIS on Testing Charges Only
5.3(Olefin Constituents- 14333-2022)	-	1050	25% Discount for BIS on Testing Charges Only
5.3(Loading of Carbon Black - IS 2530:1963)	-	925	25% Discount for BIS on Testing Charges Only
5.3(Ash content- Any Method)	-	1200	25% Discount for BIS on Testing Charges Only
5.3(Toluene extract - Any Method)	-	700	25% Discount for BIS on Testing Charges Only
5.3("Maximum volatile matter -IS 4984:2016 (Annexure-C)")	-	700	25% Discount for BIS on Testing Charges Only
5.3(Carbon black particle size - Any Method)	-	700	25% Discount for BIS on Testing Charges Only
5.4(Antioxidant - Any Method)	-	1050	25% Discount for BIS on Testing Charges Only
6(Pipe Description - IS 14333-2022)	-	500	(Visual + Colour) 25% Discount for BIS on Testing Charges Only
6.2(Colour- IS 14333-2022)	-	500	(Visual + Colour) 25% Discount for BIS on Testing Charges Only
7.1(Visual Appearance- IS 14333-2022)	-	250	(Visual + Colour) 25% Discount for BIS on Testing Charges Only
7.2(Length- IS 14333-2022)	-	500	For All Dimensions 25% Discount for BIS on Testing Charges Only
7.3(Coiling- IS 14333-2022)	-	500	For All Dimensions 25% Discount for BIS on Testing Charges Only
7.4,T3 of IS 4984(Outside Diameter-IS 4984-2016)	-	500	For All Dimensions 25% Discount for BIS on Testing Charges Only
7.4,T4 of IS 4984(wall Thickness-IS 4984-2016)	-	500	For All Dimensions 25% Discount for BIS on Testing Charges Only
7.4,T3 of IS 4984(Ovality-IS 4984-2016)	-	500	For All Dimensions 25% Discount for BIS on Testing Charges Only
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 27 oC , Test Period - 100 hrs.-IS 4984-2016 (Annexure-E))	-	4000	25% Discount for BIS on Testing Charges Only
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 48 hrs.-IS 4984-2016 (Annexure-E))	-	1600	25% Discount for BIS on Testing Charges Only
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 165 hrs.-IS 4984-2016 (Annexure-E))	-	4800	25% Discount for BIS on Testing Charges Only
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 1000 hrs.-IS 4984-2016 (Annexure-E))	-	11000	25% Discount for BIS on Testing Charges Only
8.1.2, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 48 hrs.-IS 4984-2016 (Annexure-E))	-	1600	25% Discount for BIS on Testing Charges Only
8.2("Longitudinal Reversion Test - IS 4984-2016 (Annexure-F)")	-	700	Sample Preparation : 500/- 25% Discount for BIS on Testing Charges Only
8.3(Carbon black content- IS 2530-1963)	-	925	25% Discount for BIS on Testing Charges Only
8.3(Carbon black content Dispersion- IS 2530-1963)	-	700	25% Discount for BIS on Testing Charges Only
8.4(Melt Flow rate(Temperature - 190oC,Mass 5kg)-IS 2530-1963)	-	1100	25% Discount for BIS on Testing Charges Only
8.5(Oxidation Induction Time -IS 4984:2016(Annexure-B))	-	2200	25% Discount for BIS on Testing Charges Only
8.6(Density-IS 7328:2020)	-	700	25% Discount for BIS on Testing Charges Only
8.7("Tensile Strength for Butt Fusion - IS 4984-2016 (Annexure-G)")	-	1300	25% Discount for BIS on Testing Charges Only
8.8,T5("Tensile - IS 4984-2016 (Annexure-H)")	-	1300	25% Discount for BIS on Testing Charges Only
8.8,T5("Elongation -IS 4984-2016 (Annexure-H)")	-	1300	Including Tensile Strength and Elonagtion + Specimen Preparation - 500/- 25% Discount for BIS on Testing Charges Only
8.9(Slow Crack Growth Rate{Internal Pressure creep Rupture test, Temperature - 80±1 oC , Test Pressure – 0.80MPa, Test Period - 500 hrs.-IS 4984-2016 (Annexure-E &J))	-	5500	Specimen Preparation - 500/- 25% Discount for BIS on Testing Charges Only

22 May, 2027

-
Included w.e.f. 07.10.2024

8470

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 4003 : Part 2 (1986)

Specification for pipe wrenches: Part 2 heavy duty (First Revision)

heavy duty pipe wrenches

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Dimensions- Nominal Size)	-	18000	-
3(Dimensions-Capacity D min)	-	18000	-
3(Dimensions- Capacity D max)	-	18000	-
3(Dimensions- Jaw Thickness,T min)	-	18000	-
3(Dimensions- Length of movablejae, l1)	-	18000	-
3(Dimensions- Length of Handle, l2)	-	18000	-
3(Dimensions- Width of Nut, N)	-	18000	-
5(Hardness- Movable and heel Jaws)	-	18000	-
5(Hardness- Shank of movable Jaw)	-	18000	-
5(Hardness- Adjustable nut)	-	18000	-
6.1(Manufacture- Handel)	-	18000	-
6.1(Manufacture- Handel)	-	18000	-
6.2(Movable Jaw)	-	18000	-
6.2(Movable Jaw)	-	18000	-
6.3(Heel jaw)	-	18000	-
6.3(Heel jaw)	-	18000	-
6.4(Adjusting Nut)	-	18000	-
6.4(Adjusting Nut)	-	18000	-
6.4(Adjusting Nut)	-	18000	-
6.5(Springs)	-	18000	-
6.5(Springs)	-	18000	-
7(Workmanship & Finish)	-	18000	-
7(Workmanship & Finish)	-	18000	-
7(Workmanship & Finish)	-	18000	-
7(Workmanship & Finish)	-	18000	-
8(Operation)	-	18000	-
8(Operation)	-	18000	-
11.1(Static Load Test)	-	18000	-
11.1(Static Load Test)	-	18000	-
4 AND AS PER IS 1570 PART 2(MANGANESE)	-	18000	-
4 AND AS PER IS 1570 PART 2(PHOSPHORUS)	-	18000	-
4 AND AS PER IS 1570 PART 2(SULPHUR)	-	18000	-
4 AND AS PER IS 1570 PART 2(CARBON)	-	18000	-
4 AND AS PER IS 4454 PART 1(MICRO ALLOY)	-	18000	-
4 AND AS PER IS 4454 PART 1(NITROGEN)	-	18000	-
4 AND AS PER IS 4454 PART 1(cu + cr + ni)	-	18000	-
4 AND AS PER IS 4454 PART 1(SULPHUR+ PHOSPHORUS)	-	18000	-
4 AND AS PER IS 4454 PART 1(COPPER)	-	18000	-
4 AND AS PER IS 4454 PART 1(PHOSPHORUS)	-	18000	-
4 AND AS PER IS 4454 PART 1(SULPHUR)	-	18000	-
4 AND AS PER IS 4454 PART 1(MANGANESE)	-	18000	-
4 AND AS PER IS 4454 PART 1(SILICON)	-	18000	-
4 AND AS PER IS 4454 PART 1(CARBON)	-	18000	-
4 AND AS PER IS 2707(MICRO ALLOY)	-	18000	-
4 AND AS PER IS 2707(SILICON)	-	18000	-
4 AND AS PER IS 2707(MANGANESE)	-	18000	-
4 AND AS PER IS 2707(PHOSPHORUS)	-	18000	-
4 AND AS PER IS 2707(SULPHUR)	-	18000	-
4 AND AS PER IS 2707(CARBON)	-	18000	-

-
Included w.e.f 21.10.2024

8471

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 4003 : Part 1 (1978)

Specification for pipe wrenches: Part 1 general purpose (First Revision)

pipe wrenches

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Dimensions- Nominal Size)	-	20000	5% discount to BIS
3(Dimensions-Minimum capacity)	-	20000	5% discount to BIS
3(Dimensions-Maximum capacity, D)	-	20000	5% discount to BIS
3(Dimensions- Jaw Thickness,T min)	-	20000	5% discount to BIS
3(Dimensions- Length of movablejae, l1)	-	20000	5% discount to BIS
3(Dimensions- Length of Handle, l2)	-	20000	5% discount to BIS
3(Dimensions- Width of Nut, N)	-	20000	5% discount to BIS
5(Hardness- Jaws)	-	20000	5% discount to BIS
5(Hardness- Handle of movable Jaw)	-	20000	5% discount to BIS
5(Hardness- Shank of movable Jaw)	-	20000	5% discount to BIS
6.1(Manufacture- Handel)	-	20000	5% discount to BIS
6.1(Manufacture- Handel)	-	20000	5% discount to BIS
6.2(Manufacture- Movable Jaw)	-	20000	5% discount to BIS
6.2(Manufacture- Movable Jaw)	-	20000	5% discount to BIS
6.2(Manufacture- Movable Jaw)	-	20000	5% discount to BIS
6.3(Manufacture- Adjusting Nut)	-	20000	5% discount to BIS
6.3(Manufacture- Adjusting Nut)	-	20000	5% discount to BIS
6.4(Manufacture- Frame)	-	20000	5% discount to BIS
6.5(Manufacture- Hinge Pin)	-	20000	5% discount to BIS
6.6(Manufacture- Spring)	-	20000	5% discount to BIS
6.6(Manufacture- Spring)	-	20000	5% discount to BIS
6.6(Manufacture- Spring)	-	20000	5% discount to BIS
7(Workmanship & Finish)	-	20000	5% discount to BIS
7(Workmanship & Finish)	-	20000	5% discount to BIS
7(Workmanship & Finish)	-	20000	5% discount to BIS
8(Operation)	-	20000	5% discount to BIS
8(Operation)	-	20000	5% discount to BIS
13.1(Static Load Test)	-	20000	5% discount to BIS
13.1(Static Load Test)	-	20000	5% discount to BIS
13.2(Static- Shock Load Test)	-	20000	5% discount to BIS
13.2(Static- Shock Load Test)	-	20000	5% discount to BIS
4 AND AS PER IS 1570 PART 4(BORON)	-	20000	5% discount to BIS
4 AND AS PER IS 1570 PART 4(VANADIM)	-	20000	5% discount to BIS
4 AND AS PER IS 1570 PART 4(ALUMINIUM)	-	20000	5% discount to BIS
4 AND AS PER IS 1570 PART 4(MOLYBDENUM)	-	20000	5% discount to BIS
4 AND AS PER IS 1570 PART 4(SILICON)	-	20000	5% discount to BIS
4 AND AS PER IS 1570 PART 4(MANGANESE)	-	20000	5% discount to BIS
4 AND AS PER IS 1570 PART 4(CHROMIUM)	-	20000	5% discount to BIS
4 AND AS PER IS 1570 PART 4(NICKEL)	-	20000	5% discount to BIS
4 AND AS PER IS 1570 PART 4(CARBON)	-	20000	5% discount to BIS
4 AND AS PER IS 1570 PART 2(MANGANESE)	-	20000	5% discount to BIS
4 AND AS PER IS 1570 PART 2(PHOSPHORUS)	-	20000	5% discount to BIS
4 AND AS PER IS 1570 PART 2(SULPHUR)	-	20000	5% discount to BIS
4 AND AS PER IS 1570 PART 2(CARBON)	-	20000	5% discount to BIS

-
Included w.e.f 21.10.2024

8472

ELECTRONICS TEST AND DEVELOPMENT CENTRE - ETDC (STQC), BANGALORE

6181224

ER 01 (2024)

Essential Requirement (s) for Security of CCTV

275000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1.1(Application Debug Interface Protection)	-	275000	-
2.5(Software Bill of Materials)	-	275000	-
1.2(Device Unique Crypto Keys)	-	275000	-
1.3(On-Chip Debug Interface Protection)	-	275000	-
1.4(Trusted Execution)	-	275000	-
1.5(Secure Storage)	-	275000	-
1.6(Tamper Protection)	-	275000	-
1.7(IP Protection)	-	275000	-
1.8(Boot Image Validation)	-	275000	-
1.9(Secure PRNG Usage)	-	275000	-
2.1(Memory Protection Controls)	-	275000	-
2.2(Data Transit Security)	-	275000	-
2.3(Server Connection Validation)	-	275000	-
2.4(Banned C Functions)	-	275000	-
2.6(Secure Code Review)	-	275000	-
2.7(Digital Signature Pinning)	-	275000	-
2.8(Reverse Engineering Protection)	-	275000	-
2.9(Update Process Security)	-	275000	-
2.10(Code Signing Verification)	-	275000	-
2.11(Firmware Downgrade Protection)	-	275000	-
2.12(Scheduled Firmware Updates)	-	275000	-
3.1(Wireless Mutual Authentication)	-	275000	-
3.2(Wireless Encrypted Channel)	-	275000	-
3.3(Trusted Supply Chain)	-	275000	-
3.4(Supply Chain Risk Management)	-	275000	-
3.5(Proprietary Protocols Management)	-	275000	-
4.1(Anti-Counterfeit Measures)	-	275000	-
4.2(Threat Mitigation)	-	275000	-
4.3(Malware Detection Deployment)	-	275000	-
4.4(Supply Chain Risk Assessment)	-	275000	-

-
-

8473

Electronics Regional Test Laboratory (West) - ERTL (STQC), Mumbai

7108424

ER 01 (2024)

Essential Requirement (s) for Security of CCTV

275000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1.1(Application Debug Interface Protection)	-	9166.66	-
1.2(Device Unique Crypto Keys)	-	9166.66	-
1.3(On-Chip Debug Interface Protection)	-	9166.66	-
1.4(Trusted Execution)	-	9166.66	-
1.5(Secure Storage)	-	9166.66	-
1.6(Tamper Protection)	-	9166.66	-
1.7(IP Protection)	-	9166.66	-
1.8(Boot Image Validation)	-	9166.66	-
1.9(Secure PRNG Usage)	-	9166.66	-
2.1(Memory Protection Controls)	-	9166.66	-
2.2(Data Transit Security)	-	9166.66	-
2.3(Server Connection Validation)	-	9166.66	-
2.4(Banned C Functions)	-	9166.66	-
2.5(Software Bill of Materials)	-	9166.66	-
2.6(Secure Code Review)	-	9166.66	-
2.7(Digital Signature Pinning)	-	9166.66	-
2.8(Reverse Engineering Protection)	-	9166.66	-
2.9(Update Process Security)	-	9166.66	-
2.10(Code Signing Verification)	-	9166.66	-
2.11(Firmware Downgrade Protection)	-	9166.66	-
2.12(Scheduled Firmware Updates)	-	9166.66	-
3.1(Wireless Mutual Authentication)	-	9166.66	-
3.2(Wireless Encrypted Channel)	-	9166.66	-
3.3(Trusted Supply Chain)	-	9166.66	-
3.4(Supply Chain Risk Management)	-	9166.66	-
3.5(Proprietary Protocols Management)	-	9166.66	-
4.1(Anti-Counterfeit Measures)	-	9166.66	-
4.2(Threat Mitigation)	-	9166.66	-
4.3(Malware Detection Deployment)	-	9166.66	-
4.4(Supply Chain Risk Assessment)	-	9166.66	-
1.1(Application Debug Interface Protection)	-	9166.66	-
1.2(Device Unique Crypto Keys)	-	9166.66	-
1.3(On-Chip Debug Interface Protection)	-	9166.66	-
1.4(Trusted Execution)	-	9166.66	-
1.5(Secure Storage)	-	9166.66	-
1.6(Tamper Protection)	-	9166.66	-
1.7(IP Protection)	-	9166.66	-
1.8(Boot Image Validation)	-	9166.66	-
1.9(Secure PRNG Usage)	-	9166.66	-
2.1(Memory Protection Controls)	-	9166.66	-
2.2(Data Transit Security)	-	9166.66	-
2.3(Server Connection Validation)	-	9166.66	-
2.4(Banned C Functions)	-	9166.66	-
2.5(Software Bill of Materials)	-	9166.66	-
2.6(Secure Code Review)	-	9166.66	-
2.7(Digital Signature Pinning)	-	9166.66	-
2.8(Reverse Engineering Protection)	-	9166.66	-
2.9(Update Process Security)	-	9166.66	-
2.10(Code Signing Verification)	-	9166.66	-
2.11(Firmware Downgrade Protection)	-	9166.66	-
2.12(Scheduled Firmware Updates)	-	9166.66	-
3.1(Wireless Mutual Authentication)	-	9166.66	-
3.2(Wireless Encrypted Channel)	-	9166.66	-
3.3(Trusted Supply Chain)	-	9166.66	-
3.4(Supply Chain Risk Management)	-	9166.66	-
3.5(Proprietary Protocols Management)	-	9166.66	-
4.1(Anti-Counterfeit Measures)	-	9166.66	-
4.2(Threat Mitigation)	-	9166.66	-
4.3(Malware Detection Deployment)	-	9166.66	-
4.4(Supply Chain Risk Assessment)	-	9166.66	-
1.1(Application Debug Interface Protection)	-	9166.66	-
1.2(Device Unique Crypto Keys)	-	9166.66	-
1.3(On-Chip Debug Interface Protection)	-	9166.66	-
1.4(Trusted Execution)	-	9166.66	-
1.5(Secure Storage)	-	9166.66	-
1.6(Tamper Protection)	-	9166.66	-
1.7(IP Protection)	-	9166.66	-
1.8(Boot Image Validation)	-	9166.66	-
1.9(Secure PRNG Usage)	-	9166.66	-
2.1(Memory Protection Controls)	-	9166.66	-
2.2(Data Transit Security)	-	9166.66	-
2.3(Server Connection Validation)	-	9166.66	-
2.4(Banned C Functions)	-	9166.66	-
2.5(Software Bill of Materials)	-	9166.66	-
2.6(Secure Code Review)	-	9166.66	-
2.7(Digital Signature Pinning)	-	9166.66	-
2.8(Reverse Engineering Protection)	-	9166.66	-
2.9(Update Process Security)	-	9166.66	-
2.10(Code Signing Verification)	-	9166.66	-
2.11(Firmware Downgrade Protection)	-	9166.66	-
2.12(Scheduled Firmware Updates)	-	9166.66	-
3.1(Wireless Mutual Authentication)	-	9166.66	-
3.2(Wireless Encrypted Channel)	-	9166.66	-
3.3(Trusted Supply Chain)	-	9166.66	-
3.4(Supply Chain Risk Management)	-	9166.66	-
3.5(Proprietary Protocols Management)	-	9166.66	-
4.1(Anti-Counterfeit Measures)	-	9166.66	-
4.2(Threat Mitigation)	-	9166.66	-
4.3(Malware Detection Deployment)	-	9166.66	-
4.4(Supply Chain Risk Assessment)	-	9166.66	-
1.1(Application Debug Interface Protection)	-	-	-
1.2(Device Unique Crypto Keys)	-	-	-
1.3(On-Chip Debug Interface Protection)	-	-	-
1.4(Trusted Execution)	-	-	-
1.5(Secure Storage)	-	-	-
1.6(Tamper Protection)	-	-	-
1.7(IP Protection)	-	-	-
1.8(Boot Image Validation)	-	-	-
1.9(Secure PRNG Usage)	-	-	-
2.1(Memory Protection Controls)	-	-	-
2.2(Data Transit Security)	-	-	-
2.3(Server Connection Validation)	-	-	-
2.4(Banned C Functions)	-	-	-
2.5(Software Bill of Materials)	-	-	-
2.6(Secure Code Review)	-	-	-
2.7(Digital Signature Pinning)	-	-	-
2.8(Reverse Engineering Protection)	-	-	-
2.9(Update Process Security)	-	-	-
2.10(Code Signing Verification)	-	-	-
2.11(Firmware Downgrade Protection)	-	-	-
2.12(Scheduled Firmware Updates)	-	-	-
3.1(Wireless Mutual Authentication)	-	-	-
3.2(Wireless Encrypted Channel)	-	-	-
3.3(Trusted Supply Chain)	-	-	-
3.4(Supply Chain Risk Management)	-	-	-
3.5(Proprietary Protocols Management)	-	-	-
4.1(Anti-Counterfeit Measures)	-	-	-
4.2(Threat Mitigation)	-	-	-
4.3(Malware Detection Deployment)	-	-	-
4.4(Supply Chain Risk Assessment)	-	-	-

31 Dec, 2026

-
-

8474

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 3736 (1995)

Canvas boots, rubber sole - Specification (Second Revision)

Canvas boots, rubber sole

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4.1.7.4 Ageing(The boots shall be also aged at 70 ± 1°C for 168 h, on completion of which the test pieces taken from the soles and heels of the boots shall conform to the physical requirements prescribed in Table 5. i) Tensile Length)	-	100	-
Cl.4.1.7.4 Ageing(ii) Elongation at break)	-	100	-
Cl.4.1.7.2 IS 3400 (Part 2) : 1980(2)Hardness, IRHD)	-	100	-
4.1.6 Fabric Laces Cl.4.1.6.1( The boots shall be provided with braided of cotton or man made or blended fabric laces 115 ± 5 cm in length, matching the colour of the upper. )	-	100	-
Cl.4.1.1 upper IS 1969(d) Picks/dm)	-	150	-
Cl.4.4.5 ( Table 1.)(d) Picks/dm)	-	150	-
4.1.2 Lining Material(195 ± 5 picks/dm shall be used.)	-	150	-
Cl.4.1.1 upper IS 1969(c) Ends/dm )	-	150	-
Cl.4.4.5 ( Table 1.)(c) Ends/dm )	-	150	-
4.1.2 Lining Material(having 390 ± 10 ends/dm and )	-	150	-
Cl.4.1.7.2 IS 3400 (Part 4) : 1987 IS 3400 (Part 2) : 1980(Change in initial hardness after accelerated ageing for 24 h at l00 ± 1°C)	-	250	-
Cl.4.8 Adhesion Test(From the upper foxing portion where it is adhered to the canvas cut a strip of 8.0 ± 0.5 mm width along with the length of the sole at the waist portion and of sufficient lengh to permit separation over a length of at least 75 mm. Carry out the test on two test pieces (one from each odd) at the rate of traverse of 100 ± 10 mm per minute in accordance with IS 3400 (Part 5):1986 or the Static Dead Load Method as given in Annex C. The individual adhesion value noted/recorded shall not be less than 8 N (0.8 kgf) for each of the test pieces ( see Note under 4.7 ).')	-	250	-
Cl.4.1.7.2 IS 3400 (Part 1) : 1987(Tensile strength in MPa, Min)	-	200	-
Cl.4.1.3 Binding Material IS 1954:1990(Cotton tape NEWAR used as binding material shall conform to the requirements as mentioned in Table 2, when tested in accordance with the methods referred to in col 4 of Table 2. 1)Width, mm. Min )	-	300	-
Cl.4.4.3(The top, side and front edges of the quarters and tongue shall be bound with cotton tape NEWAR of not less than 13 mm width using variety No. 29 thread.)	-	300	-
Cl.4.1.7.3 IS 3400 (Part 10) : 1977(Compression set, in percent. Max)	-	100	-
Cl.4.4.4( The back of the quarter shall be reinforced with a strip, not less than 25 mm wide,of either upper material or canvas. In case of composite upper material the edges of the strip shall be bound by cotton tape ( NEWAR ). When canvas cloth is used the edges shall be folded and shall be stitched with two rows of stitching.)	-	100	-
Cl.4.7 Consolidation Test(From the quarter, cut a strip of 25.0 ± 0. 5 mm width along the length of the boot and of sufficient length to permit separation over a length of 75 mm. Carry out the test on two test pieces (one from each odd) at the rate of traverse of 100 ± 10mm per minute in accordance with IS 3400 (Part 5): 1986 or Static Dead Load Method as given in Annex C. The individual adhesion value for consolidation test shall not be less than 30 N (3.0 kgf) for each of the test pieces)	-	200	-
Cl.4.1.7.2 IS 3400 (Part 1) : 1987(Elongation at break, in percent, Min)	-	200	-
IS 1969:1985(Breaking load on 50 cm test length. N, Min)	-	500	-
4.1.6 Fabric Laces Cl.4.1.6.1(The laces shall have a minimum breaking load of 450 N, when tested between 18 cm grips, the rate of traverse of power actuated grip being 30 cm/min.)	-	300	-
Cl.4.1.7.2 IS 3400 (Part 16) : 1974(iii)Flexing resistance, number of cycles b)Cut growth at the end of 150 000 cycles, Percent, Max)	-	300	-
Cl.4.4.5 ( Table 1.)(b) Weft )	-	300	-
Cl.4.4.5 ( Table 1.)( in case of half bellow. Thefull bellow tongue shall be made out of canvas cloth as prescribed in Sl No. (i) of Table 1. Breaking load in N, Min a) Warp )	-	200	-
Cl.4.1.1 upper IS 1969(b)Weft)	-	200	-
Cl.4.1.1 upper IS 1969(Breaking load in N.Min (5 × 20 cm grip): a) Wrap)	-	500	-
Cl.4.1.7.2 IS 3400 (Part 16) : 1974(iii)Flexing resistance, number of cycles a)Initial crack, Min)	-	100	-
4.1.2 Lining Material( 200 N Minin weft way (when tested in accordance with IS 1969 : 1985) )	-	100	-
4.1.2 Lining Material(For covering of the insole, cotton drill conforming to Table 1, Sl No. (ii) shall be used. For detachable insole, bleached cotton twill of breaking load 390 N Min in warp way and)	-	100	-
Cl.4.1.1 upper(The upper shall consist of Rip Stop Fabric of cotton or manmade or its blend being the over layer and cotton drill as an inner layer and shall conform to the requirements given at Sl No. (i) of Table 1. Sr.no 1.Overlayer Construction )	-	200	-
4.1.1.1 Colour fastness(The dyed fabrics prescribed in 4.1.1 shall be fast to daylight and mechanical washing. Fastness to daylight shall be of rating 4 or better, when tested in accordance with IS 686 : 1985 or IS 2454 : 1985.)	-	100	-
Cl.4.1.1.2( Fastness to mechanical washing (mild) shall be of rating 4 or better, when tested in accordance with IS 764 : 1979)	-	100	-
Cl.4.1.3.3( Black tapes shall be free from sulphur dyes when tested in accordance with Annex B.)	-	300	-
Cl.4.1.4 Reinforcement Material(The back seam, joining two quarters at the back of the heel shall be reinforced with a not less than 25 mm wide tape made out of material conforming to Sl No. (i) of Table 1)	-	200	-
Cl.4.1.7.2 IS 3400 (Part 9) : 1978( The rubber components shall conform to Table 4 when tested.' ( Page 3, Table 4, Note 1) — 'However in case it is not possible then 4.2.5.3 of IS 13695:1993 shall be followed. 1)Relative density, Max)	-	300	-
Cl.4.3 Leg Height(The leg height of the boots for size 8 shall be 160 ± 2 mm with an increase or decrease of 4 mm of the nominal height for each bigger or smaller sizes respectively when measured at the inside from the back of the boot from insole to the top.)	-	200	-
Cl.4.4.2( The canvas upper shall be lined with bleached drill cloth.)	-	100	-
Cl.4.4.3( The upper shall be stitched on a lockstitch machine, with 30 to 40 stitches per decimetre by thread of variety No. 8 and variety No. 29 cotton sewing thread conforming to 4.1.5 using variety No. 29 for taping and binding and variety No. 8 for remaining seams. )	-	200	-
Cl.4.4.5 ( The tongue shall be either half or full bellow depending on the requirement of the purchaser andshall be made from composite material prescribed for the upper in 4.1.1.)	-	100	-
Cl.4.4.6( A minimum of seven aluminium, brass or steel eyelets having 10 mm diameter and wall thickness 0.30 to 0.35 mm shall be fitted in each face.')	-	100	-
Cl.4.4.7( The toe shall be reinforced with a toe puff cemented inside and outside with rubber toe cap. The heel piece (counter) or stiffener shall be set from the bottom of the lining and bound flat on the top edge with white cloth for binding of countertop edge with white clothfor binding of counter)	-	100	-
Cl.4.4.8( A strengthening rubber arch piece shall be firmly pasted and stitched at the middle arch of the inside quarter. Another strengthening rubber piece, circular in shape 35 ± 1 mm in diameter, may bepasted and stitched at the centre of the inside)	-	100	-
Cl.4.4.10( A 25 mm Min wide and 2 mm Min thick rubber golosh in serrated, diamond or any otherdesign, as agreed to between the purchaser and thesupplier, shall be fitted all round the sole edge of the boot. The golosh shall not extend below the edge of the sole.)	-	100	-
Cl.4.5.1(Cl.4.1.6.)( Each pair of boot shall be provided with a pair of braided fabric laces of the quality as prescribed in 4.1.6.)	-	100	-
Cl.4.5.2( In appearance, general workmanship, finish and in all other respects, not defined in this standard, the boot shall be similar to those of the sample approved by the purchaser, if any.)	-	100	-
Cl.4.6 Mass(The mass of finished boots, rubber sole, of size 8 shall not exceed 1130 g per pair, and the mass shall increase or decrease by 75 g per pair for each bigger or smaller size respectively.)	-	100	-
Cl.4.9 Composite Breaking Strength Test( From the upper of made up footwear representative sample of width 25 ± 0.5 mm width strip is to be cut along the length of the boot of enough length so as to make it convenient to allow a distance of minimum 30 mm between the jaws of the tensile machine.Rate of traverse of pulling jaw shall be 100 ± 5 mm per minute. Two such test pieces will be required to be obtained from the made up footwear and will be subjected to test to break each test piece. Mean value of each set of test pieces comprising of length wise and height wise test pieces will be 1 000 N/25 mm width minimum.')	-	100	-
Cl.4.1.7.4 Ageing(The boots shall be also aged at 70 ± 1°C for 168 h, on completion of which the test pieces taken from the soles and heels of the boots shall conform to the physical requirements prescribed in Table 5. i) Tensile Length)	-	0	-
Cl.4.1.7.4 Ageing(ii) Elongation at break)	-	0	-
Cl.4.1.7.2 IS 3400 (Part 2) : 1980(2)Hardness, IRHD)	-	0	-
4.1.6 Fabric Laces Cl.4.1.6.1( The boots shall be provided with braided of cotton or man made or blended fabric laces 115 ± 5 cm in length, matching the colour of the upper. )	-	0	-
Cl.4.1.1 upper IS 1969(d) Picks/dm)	-	0	-
Cl.4.4.5 ( Table 1.)(d) Picks/dm)	-	0	-
4.1.2 Lining Material(195 ± 5 picks/dm shall be used.)	-	0	-
Cl.4.1.1 upper IS 1969(c) Ends/dm )	-	0	-
Cl.4.4.5 ( Table 1.)(c) Ends/dm )	-	0	-
4.1.2 Lining Material(having 390 ± 10 ends/dm and )	-	0	-
Cl.4.8 Adhesion Test(From the upper foxing portion where it is adhered to the canvas cut a strip of 8.0 ± 0.5 mm width along with the length of the sole at the waist portion and of sufficient lengh to permit separation over a length of at least 75 mm. Carry out the test on two test pieces (one from each odd) at the rate of traverse of 100 ± 10 mm per minute in accordance with IS 3400 (Part 5):1986 or the Static Dead Load Method as given in Annex C. The individual adhesion value noted/recorded shall not be less than 8 N (0.8 kgf) for each of the test pieces ( see Note under 4.7 ).')	-	0	-
Cl.4.4.9(From the upper of made up footwear representative sample of width 25 ± 0.5 mm width strip is to be cut along the length of the boot of enough length so as to make it convenient to allow a distance of minimum 30 mm between the jaws of the tensile machine)	-	0	-
Cl.4.1.7.2 IS 3400 (Part 4) : 1987 IS 3400 (Part 2) : 1980(Change in initial hardness after accelerated ageing for 24 h at l00 ± 1°C)	-	0	-
Cl.4.1.3 Binding Material IS 1954:1990(Cotton tape NEWAR used as binding material shall conform to the requirements as mentioned in Table 2, when tested in accordance with the methods referred to in col 4 of Table 2. 1)Width, mm. Min )	-	0	-
Cl.4.4.3(The top, side and front edges of the quarters and tongue shall be bound with cotton tape NEWAR of not less than 13 mm width using variety No. 29 thread.)	-	0	-
Cl.4.1.7.3 IS 3400 (Part 10) : 1977(Compression set, in percent. Max)	-	0	-
Cl.4.4.4( The back of the quarter shall be reinforced with a strip, not less than 25 mm wide,of either upper material or canvas. In case of composite upper material the edges of the strip shall be bound by cotton tape ( NEWAR ). When canvas cloth is used the edges shall be folded and shall be stitched with two rows of stitching.)	-	0	-
Cl.4.7 Consolidation Test(From the quarter, cut a strip of 25.0 ± 0. 5 mm width along the length of the boot and of sufficient length to permit separation over a length of 75 mm. Carry out the test on two test pieces (one from each odd) at the rate of traverse of 100 ± 10mm per minute in accordance with IS 3400 (Part 5): 1986 or Static Dead Load Method as given in Annex C. The individual adhesion value for consolidation test shall not be less than 30 N (3.0 kgf) for each of the test pieces)	-	0	-
Cl.4.1.7.2 IS 3400 (Part 1) : 1987(Elongation at break, in percent, Min)	-	0	-
IS 1969:1985(Breaking load on 50 cm test length. N, Min)	-	0	-
4.1.6 Fabric Laces Cl.4.1.6.1(The laces shall have a minimum breaking load of 450 N, when tested between 18 cm grips, the rate of traverse of power actuated grip being 30 cm/min.)	-	0	-
Cl.4.1.7.2 IS 3400 (Part 16) : 1974(iii)Flexing resistance, number of cycles b)Cut growth at the end of 150 000 cycles, Percent, Max)	-	0	-
Cl.4.4.5 ( Table 1.)(b) Weft )	-	0	-
Cl.4.4.5 ( Table 1.)( in case of half bellow. Thefull bellow tongue shall be made out of canvas cloth as prescribed in Sl No. (i) of Table 1. Breaking load in N, Min a) Warp )	-	0	-
Cl.4.1.1 upper IS 1969(b)Weft)	-	0	-
Cl.4.1.1 upper IS 1969(Breaking load in N.Min (5 × 20 cm grip): a) Wrap)	-	0	-
Cl.4.1.7.2 IS 3400 (Part 16) : 1974(iii)Flexing resistance, number of cycles a)Initial crack, Min)	-	0	-
4.1.2 Lining Material( 200 N Minin weft way (when tested in accordance with IS 1969 : 1985) )	-	0	-
4.1.2 Lining Material(For covering of the insole, cotton drill conforming to Table 1, Sl No. (ii) shall be used. For detachable insole, bleached cotton twill of breaking load 390 N Min in warp way and)	-	0	-
Cl.4.1.1 upper(The upper shall consist of Rip Stop Fabric of cotton or manmade or its blend being the over layer and cotton drill as an inner layer and shall conform to the requirements given at Sl No. (i) of Table 1. Sr.no 1.Overlayer Construction )	-	0	-
4.1.1.1 Colour fastness(The dyed fabrics prescribed in 4.1.1 shall be fast to daylight and mechanical washing. Fastness to daylight shall be of rating 4 or better, when tested in accordance with IS 686 : 1985 or IS 2454 : 1985.)	-	0	-
Cl.4.1.1.2( Fastness to mechanical washing (mild) shall be of rating 4 or better, when tested in accordance with IS 764 : 1979)	-	0	-
Cl.4.1.3.3( Black tapes shall be free from sulphur dyes when tested in accordance with Annex B.)	-	0	-
Cl.4.1.4 Reinforcement Material(The back seam, joining two quarters at the back of the heel shall be reinforced with a not less than 25 mm wide tape made out of material conforming to Sl No. (i) of Table 1)	-	0	-
Cl.4.1.5 Thread for Upper Closing Cl.4.1.5.1 (IS 1670:1991)(Sewing thread cotton, man made or blended shall be used for stitching of upper. For cotton variety thread shall conform to variety No. 28 of IS 1720. Polyester variety thread shall conform to variety No. 9 of IS 9543. Any other blend of thread would have breaking load not less than above referred requirements. Sewing thread cotton, manmade or blended shall be used for binding of upper. For cotton variety thread shall conform to variety No. 32 of IS 1720. Polyester variety thread shall conform to variety No. 5 of IS 9543. Any other blend of thread would have breaking load not less than above referred requirement of specification.')	-	0	-
Cl.4.1.5.2( The colour of the threads shall be asagreed to between the purchaser and the supplier. The dyed threads shall conform to the following requirements)	-	0	-
4.1.6 Fabric Laces Cl.4.1.6.1(The two ends of the lace shall be provided with suitable metal or plastic tips. Black laces shall be free from sulphur dyes when tested in accordance with Annex B.)	-	0	-
Cl.4.1.7 Rubber Components Cl.4.1.7.1( the soles and heels shall conform to Type 2 of IS 5676:1995.)	-	0	-
Cl.4.1.7.2 IS 3400 (Part 9) : 1978( The rubber components shall conform to Table 4 when tested.' ( Page 3, Table 4, Note 1) — 'However in case it is not possible then 4.2.5.3 of IS 13695:1993 shall be followed. 1)Relative density, Max)	-	0	-
Cl.4.1.7.5 Thickness of components(Individual components of the boots shall comply with the thickness and material requirements prescribed in Table 6.)	-	0	-
Cl.4.3 Leg Height(The leg height of the boots for size 8 shall be 160 ± 2 mm with an increase or decrease of 4 mm of the nominal height for each bigger or smaller sizes respectively when measured at the inside from the back of the boot from insole to the top.)	-	0	-
Cl.4.4.2( The canvas upper shall be lined with bleached drill cloth.)	-	0	-
Cl.4.4.3( The upper shall be stitched on a lockstitch machine, with 30 to 40 stitches per decimetre by thread of variety No. 8 and variety No. 29 cotton sewing thread conforming to 4.1.5 using variety No. 29 for taping and binding and variety No. 8 for remaining seams. )	-	0	-
Cl.4.4.5 ( The tongue shall be either half or full bellow depending on the requirement of the purchaser andshall be made from composite material prescribed for the upper in 4.1.1.)	-	0	-
Cl.4.4.6( A minimum of seven aluminium, brass or steel eyelets having 10 mm diameter and wall thickness 0.30 to 0.35 mm shall be fitted in each face.')	-	0	-
Cl.4.4.7( The toe shall be reinforced with a toe puff cemented inside and outside with rubber toe cap. The heel piece (counter) or stiffener shall be set from the bottom of the lining and bound flat on the top edge with white cloth for binding of countertop edge with white clothfor binding of counter)	-	0	-
Cl.4.4.8( A strengthening rubber arch piece shall be firmly pasted and stitched at the middle arch of the inside quarter. Another strengthening rubber piece, circular in shape 35 ± 1 mm in diameter, may bepasted and stitched at the centre of the inside)	-	0	-
Cl.4.4.10( A 25 mm Min wide and 2 mm Min thick rubber golosh in serrated, diamond or any otherdesign, as agreed to between the purchaser and thesupplier, shall be fitted all round the sole edge of the boot. The golosh shall not extend below the edge of the sole.)	-	0	-
Cl.4.5.1(Cl.4.1.6.)( Each pair of boot shall be provided with a pair of braided fabric laces of the quality as prescribed in 4.1.6.)	-	0	-
Cl.4.5.2( In appearance, general workmanship, finish and in all other respects, not defined in this standard, the boot shall be similar to those of the sample approved by the purchaser, if any.)	-	0	-
Cl.4.6 Mass(The mass of finished boots, rubber sole, of size 8 shall not exceed 1130 g per pair, and the mass shall increase or decrease by 75 g per pair for each bigger or smaller size respectively.)	-	0	-
Cl.4.9 Composite Breaking Strength Test( From the upper of made up footwear representative sample of width 25 ± 0.5 mm width strip is to be cut along the length of the boot of enough length so as to make it convenient to allow a distance of minimum 30 mm between the jaws of the tensile machine.Rate of traverse of pulling jaw shall be 100 ± 5 mm per minute. Two such test pieces will be required to be obtained from the made up footwear and will be subjected to test to break each test piece. Mean value of each set of test pieces comprising of length wise and height wise test pieces will be 1 000 N/25 mm width minimum.')	-	0	-
Cl.4.1.7.4 Ageing(The boots shall be also aged at 70 ± 1°C for 168 h, on completion of which the test pieces taken from the soles and heels of the boots shall conform to the physical requirements prescribed in Table 5. i) Tensile Length)	-	0	-
Cl.4.1.7.4 Ageing(ii) Elongation at break)	-	0	-
Cl.4.1.7.2 IS 3400 (Part 2) : 1980(2)Hardness, IRHD)	-	0	-
4.1.6 Fabric Laces Cl.4.1.6.1( The boots shall be provided with braided of cotton or man made or blended fabric laces 115 ± 5 cm in length, matching the colour of the upper. )	-	0	-
Cl.4.1.1 upper IS 1969(d) Picks/dm)	-	0	-
Cl.4.4.5 ( Table 1.)(d) Picks/dm)	-	0	-
4.1.2 Lining Material(195 ± 5 picks/dm shall be used.)	-	0	-
Cl.4.1.1 upper IS 1969(c) Ends/dm )	-	0	-
Cl.4.4.5 ( Table 1.)(c) Ends/dm )	-	0	-
4.1.2 Lining Material(having 390 ± 10 ends/dm and )	-	0	-
Cl.4.1.7.2 IS 3400 (Part 4) : 1987 IS 3400 (Part 2) : 1980(Change in initial hardness after accelerated ageing for 24 h at l00 ± 1°C)	-	0	-
Cl.4.8 Adhesion Test(From the upper foxing portion where it is adhered to the canvas cut a strip of 8.0 ± 0.5 mm width along with the length of the sole at the waist portion and of sufficient lengh to permit separation over a length of at least 75 mm. Carry out the test on two test pieces (one from each odd) at the rate of traverse of 100 ± 10 mm per minute in accordance with IS 3400 (Part 5):1986 or the Static Dead Load Method as given in Annex C. The individual adhesion value noted/recorded shall not be less than 8 N (0.8 kgf) for each of the test pieces ( see Note under 4.7 ).')	-	0	-
Cl.4.4.9(From the upper of made up footwear representative sample of width 25 ± 0.5 mm width strip is to be cut along the length of the boot of enough length so as to make it convenient to allow a distance of minimum 30 mm between the jaws of the tensile machine)	-	0	-
Cl.4.1.7.2 IS 3400 (Part 1) : 1987(Tensile strength in MPa, Min)	-	0	-
Cl.4.1.3 Binding Material IS 1954:1990(Cotton tape NEWAR used as binding material shall conform to the requirements as mentioned in Table 2, when tested in accordance with the methods referred to in col 4 of Table 2. 1)Width, mm. Min )	-	0	-
Cl.4.4.3(The top, side and front edges of the quarters and tongue shall be bound with cotton tape NEWAR of not less than 13 mm width using variety No. 29 thread.)	-	0	-
Cl.4.1.7.3 IS 3400 (Part 10) : 1977(Compression set, in percent. Max)	-	0	-
Cl.4.4.4( The back of the quarter shall be reinforced with a strip, not less than 25 mm wide,of either upper material or canvas. In case of composite upper material the edges of the strip shall be bound by cotton tape ( NEWAR ). When canvas cloth is used the edges shall be folded and shall be stitched with two rows of stitching.)	-	0	-
Cl.4.7 Consolidation Test(From the quarter, cut a strip of 25.0 ± 0. 5 mm width along the length of the boot and of sufficient length to permit separation over a length of 75 mm. Carry out the test on two test pieces (one from each odd) at the rate of traverse of 100 ± 10mm per minute in accordance with IS 3400 (Part 5): 1986 or Static Dead Load Method as given in Annex C. The individual adhesion value for consolidation test shall not be less than 30 N (3.0 kgf) for each of the test pieces)	-	0	-
Cl.4.1.7.2 IS 3400 (Part 1) : 1987(Elongation at break, in percent, Min)	-	0	-
IS 1969:1985(Breaking load on 50 cm test length. N, Min)	-	0	-
4.1.6 Fabric Laces Cl.4.1.6.1(The laces shall have a minimum breaking load of 450 N, when tested between 18 cm grips, the rate of traverse of power actuated grip being 30 cm/min.)	-	0	-
Cl.4.1.7.2 IS 3400 (Part 16) : 1974(iii)Flexing resistance, number of cycles b)Cut growth at the end of 150 000 cycles, Percent, Max)	-	0	-
Cl.4.4.5 ( Table 1.)(b) Weft )	-	0	-
4.1.2 Lining Material(For covering of the insole, cotton drill conforming to Table 1, Sl No. (ii) shall be used. For detachable insole, bleached cotton twill of breaking load 390 N Min in warp way and)	-	0	-
Cl.4.4.5 ( Table 1.)( in case of half bellow. Thefull bellow tongue shall be made out of canvas cloth as prescribed in Sl No. (i) of Table 1. Breaking load in N, Min a) Warp )	-	0	-
Cl.4.1.1 upper IS 1969(b)Weft)	-	0	-
Cl.4.1.1 upper IS 1969(Breaking load in N.Min (5 × 20 cm grip): a) Wrap)	-	0	-
Cl.4.1.7.2 IS 3400 (Part 16) : 1974(iii)Flexing resistance, number of cycles a)Initial crack, Min)	-	0	-
4.1.2 Lining Material( 200 N Minin weft way (when tested in accordance with IS 1969 : 1985) )	-	0	-
Cl.4.1.4 Reinforcement Material(The back seam, joining two quarters at the back of the heel shall be reinforced with a not less than 25 mm wide tape made out of material conforming to Sl No. (i) of Table 1)	-	0	-
Cl.4.1.1 upper(The upper shall consist of Rip Stop Fabric of cotton or manmade or its blend being the over layer and cotton drill as an inner layer and shall conform to the requirements given at Sl No. (i) of Table 1. Sr.no 1.Overlayer Construction )	-	0	-
4.1.1.1 Colour fastness(The dyed fabrics prescribed in 4.1.1 shall be fast to daylight and mechanical washing. Fastness to daylight shall be of rating 4 or better, when tested in accordance with IS 686 : 1985 or IS 2454 : 1985.)	-	0	-
Cl.4.1.1.2( Fastness to mechanical washing (mild) shall be of rating 4 or better, when tested in accordance with IS 764 : 1979)	-	0	-
Cl.4.1.3.3( Black tapes shall be free from sulphur dyes when tested in accordance with Annex B.)	-	0	-
Cl.4.1.5 Thread for Upper Closing Cl.4.1.5.1 (IS 1670:1991)(Sewing thread cotton, man made or blended shall be used for stitching of upper. For cotton variety thread shall conform to variety No. 28 of IS 1720. Polyester variety thread shall conform to variety No. 9 of IS 9543. Any other blend of thread would have breaking load not less than above referred requirements. Sewing thread cotton, manmade or blended shall be used for binding of upper. For cotton variety thread shall conform to variety No. 32 of IS 1720. Polyester variety thread shall conform to variety No. 5 of IS 9543. Any other blend of thread would have breaking load not less than above referred requirement of specification.')	-	0	-
Cl.4.1.5.2( The colour of the threads shall be asagreed to between the purchaser and the supplier. The dyed threads shall conform to the following requirements)	-	0	-
4.1.6 Fabric Laces Cl.4.1.6.1(The two ends of the lace shall be provided with suitable metal or plastic tips. Black laces shall be free from sulphur dyes when tested in accordance with Annex B.)	-	0	-
Cl.4.1.7 Rubber Components Cl.4.1.7.1( the soles and heels shall conform to Type 2 of IS 5676:1995.)	-	0	-
Cl.4.1.7.2 IS 3400 (Part 9) : 1978( The rubber components shall conform to Table 4 when tested.' ( Page 3, Table 4, Note 1) — 'However in case it is not possible then 4.2.5.3 of IS 13695:1993 shall be followed. 1)Relative density, Max)	-	0	-
Cl.4.1.7.5 Thickness of components(Individual components of the boots shall comply with the thickness and material requirements prescribed in Table 6.)	-	0	-
Cl.4.3 Leg Height(The leg height of the boots for size 8 shall be 160 ± 2 mm with an increase or decrease of 4 mm of the nominal height for each bigger or smaller sizes respectively when measured at the inside from the back of the boot from insole to the top.)	-	0	-
Cl.4.4.2( The canvas upper shall be lined with bleached drill cloth.)	-	0	-
Cl.4.4.3( The upper shall be stitched on a lockstitch machine, with 30 to 40 stitches per decimetre by thread of variety No. 8 and variety No. 29 cotton sewing thread conforming to 4.1.5 using variety No. 29 for taping and binding and variety No. 8 for remaining seams. )	-	0	-
Cl.4.4.5 ( The tongue shall be either half or full bellow depending on the requirement of the purchaser andshall be made from composite material prescribed for the upper in 4.1.1.)	-	0	-
Cl.4.4.6( A minimum of seven aluminium, brass or steel eyelets having 10 mm diameter and wall thickness 0.30 to 0.35 mm shall be fitted in each face.')	-	0	-
Cl.4.4.7( The toe shall be reinforced with a toe puff cemented inside and outside with rubber toe cap. The heel piece (counter) or stiffener shall be set from the bottom of the lining and bound flat on the top edge with white cloth for binding of countertop edge with white clothfor binding of counter)	-	0	-
Cl.4.4.8( A strengthening rubber arch piece shall be firmly pasted and stitched at the middle arch of the inside quarter. Another strengthening rubber piece, circular in shape 35 ± 1 mm in diameter, may bepasted and stitched at the centre of the inside)	-	0	-
Cl.4.4.10( A 25 mm Min wide and 2 mm Min thick rubber golosh in serrated, diamond or any otherdesign, as agreed to between the purchaser and thesupplier, shall be fitted all round the sole edge of the boot. The golosh shall not extend below the edge of the sole.)	-	0	-
Cl.4.5.1(Cl.4.1.6.)( Each pair of boot shall be provided with a pair of braided fabric laces of the quality as prescribed in 4.1.6.)	-	0	-
Cl.4.5.2( In appearance, general workmanship, finish and in all other respects, not defined in this standard, the boot shall be similar to those of the sample approved by the purchaser, if any.)	-	0	-
Cl.4.6 Mass(The mass of finished boots, rubber sole, of size 8 shall not exceed 1130 g per pair, and the mass shall increase or decrease by 75 g per pair for each bigger or smaller size respectively.)	-	0	-
Cl.4.9 Composite Breaking Strength Test( From the upper of made up footwear representative sample of width 25 ± 0.5 mm width strip is to be cut along the length of the boot of enough length so as to make it convenient to allow a distance of minimum 30 mm between the jaws of the tensile machine.Rate of traverse of pulling jaw shall be 100 ± 5 mm per minute. Two such test pieces will be required to be obtained from the made up footwear and will be subjected to test to break each test piece. Mean value of each set of test pieces comprising of length wise and height wise test pieces will be 1 000 N/25 mm width minimum.')	-	0	-
4.1.3.2(Fastness to mechanical washing (mild))	-	0	-
4.1.3(Cotton tape NEWAR)	-	0	-
Table 2 (ii)(Breaking load on 50 cm test length. N, Min)	-	0	-
4.1.6.2(Laces- Fastness to daylight)	-	0	-
4.1.6.3(Laces- Fastness to mechanical washing (mild))	-	0	-
Cl.4.4.9(From the upper of made up footwear representative sample of width 25 ± 0.5 mm width strip is to be cut along the length of the boot of enough length so as to make it convenient to allow a distance of minimum 30 mm between the jaws of the tensile machine)	-	0	-
Cl.4.1.5 Thread for Upper Closing Cl.4.1.5.1 (IS 1670:1991)(Sewing thread cotton, man made or blended shall be used for stitching of upper. For cotton variety thread shall conform to variety No. 28 of IS 1720. Polyester variety thread shall conform to variety No. 9 of IS 9543. Any other blend of thread would have breaking load not less than above referred requirements. Sewing thread cotton, manmade or blended shall be used for binding of upper. For cotton variety thread shall conform to variety No. 32 of IS 1720. Polyester variety thread shall conform to variety No. 5 of IS 9543. Any other blend of thread would have breaking load not less than above referred requirement of specification.')	-	0	-
Cl.4.1.5.2( The colour of the threads shall be asagreed to between the purchaser and the supplier. The dyed threads shall conform to the following requirements)	-	0	-
4.1.6 Fabric Laces Cl.4.1.6.1(The two ends of the lace shall be provided with suitable metal or plastic tips. Black laces shall be free from sulphur dyes when tested in accordance with Annex B.)	-	0	-
Cl.4.1.7 Rubber Components Cl.4.1.7.1( the soles and heels shall conform to Type 2 of IS 5676:1995.)	-	0	-
Cl.4.1.7.5 Thickness of components(Individual components of the boots shall comply with the thickness and material requirements prescribed in Table 6.)	-	0	-
Cl.4.1.7.2 IS 3400 (Part 1) : 1987(Tensile strength in MPa, Min)	-	0	-

-
Included w.e.f 13.02.2025

8475

BIS, Western Regional Laboratory (WRL)

None

IS 14543 (2024)

Packaged Drinking Water Other than Packaged Natural Mineral Water Specification Third Revision

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.3 (Appearance)	-
5.4/Annex D/i (P,P-DDT)	-
5.4/Annex D/ii (Lindane)	-
5.4/Annex D/iv (b-Endosulfan)	-
5.4/Annex D/xvi (Dieldrin)	-
5.4/Annex D/xvi (Aldrin)	-
5.4/Annex D/i (O,P-DDT)	-
5.4/Annex D/iv (a-Endosulfan)	-
5.4/Annex D/iii (d-HCH)	-
5.4/Annex D/i (O,P-DDD)	-
5.4/Annex D/i (P,P-DDE)	-
5.4/Annex D/i (O,P-DDE)	-
5.4/Annex D/iii (a-HCH)	-
5.4/Annex D/iii (β- HCH)	-
5.4/Annex D/iv (Endosulfan sulfate)	-
5.4/Annex D/i (P,P-DDD)	-
5.4/Annex D/xii (Alachlor)	-
5.4/Annex D/vii (Chlorpyrifos)	-
5.4/Annex D/x (Butachlor)	-
5.4/Annex D/vi (Ethion)	-
5.4/Annex D/xiv (Methyl parathion)	-
5.4/Annex D/xv (Malathion)	-
5.4/Annex D/viii (Phorate)	-
5.4/Annex D/v (Monochrotophos)	-
5.4/Annex D/xiii (Atrazine)	-
5.4/Annex D/viii (Phorate sulphoxide)	-
5.4/Annex D/viii (Phorate sulfone)	-
5.4/Annex D/xxvii (Methyl paraoxon)	-
5.4/Annex D/xxviii (Malaoxon)	-
5.4/Annex D/xi (Isoproturon)	-
5.4/Annex D/ix (2,4 –D)	-
Cl-5.3, Table-1 (i) (Colour, true colour units, Max)	-
Cl-5.3, Table-1 (ii) (Odour)	-
Cl-5.3, Table-1 (iii) (Taste)	-
Cl-5.3, Table-1 (iv) (Turbidity, nephelometric turbidity unit (NTU), Max)	-
Cl-5.3, Table-1 (v) (Total dissolved solids, mg/l, Max)	-
Cl-5.3, Table-1 (vi) (pH)	-
Cl-5.3, Table-2 (i) (Barium (as Ba))	-
Cl-5.3, Table-2 (ii) (Copper (as Cu))	-
Cl-5.3, Table-2 (iii) (Iron (as Fe))	-
Cl-5.3, Table-2 (iv) (Manganese (as Mn))	-
Cl-5.3, Table-2 (v) (Nitrate (as NO3 ))	-
Cl-5.3, Table-2 (vi) (Nitrite (as NO2 ))	-
Cl-5.3, Table-2 (vii) (Fluoride (as F))	-
Cl-5.3, Table-2 (viii) (Zinc (as Zn))	-
Cl-5.3, Table-2 (ix) (Silver (as Ag))	-
Cl-5.3, Table-2 (x) (Aluminium (as A1))	-
Cl-5.3, Table-2 (xi) (Chloride (as Cl))	-
Cl-5.3, Table-2 (xii) (Selenium (as Se))	-
Cl-5.3, Table-2 (xiii) (Sulphate (as SO4 ))	-
Cl-5.3, Table-2 (xiv) (Alkalinity (as HCO3 ))	-
Cl-5.3, Table-2 (xv) (Calcium (as Ca))	-
Cl-5.3, Table-2 (xvi) (Magnesium (as Mg))	-
Cl-5.3, Table-2 (xvii) (Sodium (as Na))	-
Cl-5.3, Table-2 (xviii) (Residual free chlorine)	-
Cl-5.3, Table-2 (xix) (Phenolic compounds (as C6H5OH))	-
Cl-5.3, Table-2 (xx) (Mineral oil)	-
Cl-5.3, Table-2 (xxi) (Anionic surface active agents)	-
Cl-5.3, Table-2 (xxii) (Sulphide)	-
Cl-5.3, Table-2 (xxiii) (Antimony (as Sb))	-
Cl-5.3, Table-2 (xxiv) (Borates (as B))	-
Cl-5.3, Table-2 (xxv) (Bromates (as BrO3 ))	-
Cl-5.3, Table-3 (i) (Mercury (as Hg))	-
Cl-5.3, Table-3 (ii) (Cadmium (as Cd))	-
Cl-5.3, Table-3 (iii) (Arsenic (as As))	-
Cl-5.3, Table-3 (v) (Lead (as Pb))	-
Cl-5.3, Table-3 (vi) (Chromium (as Cr))	-
Cl-5.3, Table-3 (vii) (Nickel (as Ni))	-
Cl-5.3, Table-3 (viii) (Polychlorinated biphenyl (PCB))	-
Cl-5.3, Table-3 (ix) (Polynuclear aromatic hydrocarbons)	-
Cl-5.3, Table-3 (x) (Uranium)	-
Cl-5.4 (i) (Pesticide residues considered individually)	-
Cl-5.4 (ii) (Total pesticide residue)	-
Cl-5.2.1 (Escherichia coli or thermotolerant bacteria)	-
Cl-5.2.2 (Coliform)	-
Cl-5.2.3 (Staphylococcus aureus)	-
Cl-5.2.4 (Sulphite Reducing Anaerobes)	-
Cl-5.2.5 (Pseudomonas Aeruginosa)	-
Cl-5.2.6 (Aerobic Microbial Count @ 37 deg C)	-
Cl-5.2.7 (Yeast and mould)	-
Cl-5.2.8 (Salmonella)	-
Cl-5.2.9 (Vibrio cholera)	-
Cl-5.2.3 (Faecal streptococci)	-
Cl-5.2.8 (shigella)	-
Cl-5.2.9 (V.parahaemolyticus)	-
5.2.6 (Aerobic Microbial Count @ 20 to 22 deg C)	-

-
Excluding Cyanide, Radio Active Elements. For testing of Pesticide Residues please indicate accordingly

8476

MS TESTING LABORATORY LLP

8187716

IS 2932 (2013)

Enamel, synthetic, exterior: (a) Undercoating (b) Finishing - Specification (Fourth Revision)

Under Coating, Finishing

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.4(Skin Formation)	-	500	-
6.3(Freedom from Coarse Particles)	-	500	-
6.5(Thinning Properties)	-	500	-
6.6(Application Properties)	-	500	-
6.8(Lead Restriction)	-	700	-
6.9 Table 2 (1) a. Consistency ( Undercoating and Finishing ) )	-	200	-
6.9 Table 2 (1) b. Viscosity by ford 80-120 s )	-	500	-
6.9 Table 2 ( 2) Mass, ( Under coating ) )	-	500	-
6.9 Table 2 ( 2) Mass, (Finishing ) )	-	500	-
6.9 Table 2 (3) Drying time, a) Surface dry, ( Under coating ) )	-	500	-
6.9 Table 2 (3) Drying time, a) Surface dry, ( Finishing ) )	-	500	-
6.9 Table 2 (b) Hard dry ( Under coating ) )	-	500	-
6.9 Table 2 (b) Hard dry, (Finishing ) )	-	500	-
6.9 Table 2 (c) Tack free ( Under coating (Finishing ) )	-	500	-
6.9 Table 2 (4) a) Finish (Under coating ) )	-	500	-
6.9 Table 2 (4) a) Finish (Finishing) )	-	500	-
6.9 Table 2 (b) ) Gloss 60º (Under coating ) )	-	500	-
6.9 Table 2 (5) Fineness of grind,(Under coating ))	-	500	-
6.9 Table 2 (5) Fineness of grind,(Finishing))	-	500	-
6.9 Table 2 (6) Colour , (Finishing))	-	500	-
6.9 Table 2 (7) Flexibility and adhesion: a) Scratch hardness No such scratch as to show the bare metal after Clause 3 of — (Load 1 000 g) ( Under coating & Finishing ) )	-	500	-
6.9 Table 2 (b) Bend test (with 6.25 mm 48 h of air in type 1 apparatus) ( Under coating & Finishing ) )	-	500	-
6.9 Table 2 (8) Flash point ( Under coating & Finishing ) )	-	500	-
6.9 Table 2 (9) Composition: a) Volume solids ( Under coating ))	-	1000	-
6.9 Table 2 (9) Composition: a) Volume solids ( Finishing))	-	1000	-
6.9 Table 2 (9) Composition:b) Phthalic anhydride content of non-volatile vehicle ( Under coating & Finishing ))	-	1000	-
6.9 Table 2 (10) Resistance to acid ( Under coating & Finishing ))	-	500	-
6.9 Table 2 (11) Resistance to alkali ( Under coating & Finishing ))	-	500	-
6.9 Table 2 (12) Accelerated storage stability test ( Under coating & Finishing ))	-	1000	-
6.9 Table 2 (13) Keeping properties ( Under coating & Finishing ))	-	3200	Keeping properties test report will be done after 12 months
6.9 Table 2 (14) Wet opacity ( Under coating & Finishing ))	-	500	-
6.3(Freedom from Coarse Particles)	-	500	-
6.4(Skin Formation)	-	500	-
6.5(Thinning Properties)	-	500	-
6.6(Application Properties)	-	500	-
6.8(Lead Restriction)	-	500	-
6.9 Table 2 (1) a. Consistency ( Undercoating and Finishing ) )	-	200	-
6.9 Table 2 (1) b. Viscosity by ford 80-120 s )	-	500	-
6.9 Table 2 ( 2) Mass, ( Under coating ) )	-	500	-
6.9 Table 2 ( 2) Mass, (Finishing ) )	-	500	-
6.9 Table 2 (3) Drying time, a) Surface dry, ( Under coating ) )	-	500	-
6.9 Table 2 (3) Drying time, a) Surface dry, ( Finishing ) )	-	500	-
6.9 Table 2 (b) Hard dry ( Under coating ) )	-	500	-
6.9 Table 2 (b) Hard dry, (Finishing ) )	-	500	-
6.9 Table 2 (c) Tack free ( Under coating (Finishing ) )	-	500	-
6.9 Table 2 (4) a) Finish (Under coating ) )	-	500	-
6.9 Table 2 (4) a) Finish (Finishing) )	-	500	-
6.9 Table 2 (b) ) Gloss 60º (Under coating ) )	-	500	-
6.9 Table 2 (b) ) Gloss 60º (Finishing) )	-	500	-
6.9 Table 2 (b) ) Gloss 60º (Finishing) )	-	500	-
6.9 Table 2 (5) Fineness of grind,(Under coating ))	-	500	-
6.9 Table 2 (5) Fineness of grind,(Finishing))	-	500	-
6.9 Table 2 (6) Colour , (Finishing))	-	500	-
6.9 Table 2 (7) Flexibility and adhesion: a) Scratch hardness No such scratch as to show the bare metal after Clause 3 of — (Load 1 000 g) ( Under coating & Finishing ) )	-	500	-
6.9 Table 2 (b) Bend test (with 6.25 mm 48 h of air in type 1 apparatus) ( Under coating & Finishing ) )	-	500	-
6.9 Table 2 (8) Flash point ( Under coating & Finishing ) )	-	500	-
6.9 Table 2 (9) Composition: a) Volume solids ( Under coating ))	-	1000	-
6.9 Table 2 (9) Composition: a) Volume solids ( Finishing))	-	1000	-
6.9 Table 2 (9) Composition:b) Phthalic anhydride content of non-volatile vehicle ( Under coating & Finishing ))	-	1000	-
6.9 Table 2 (10) Resistance to acid ( Under coating & Finishing ))	-	500	-
6.9 Table 2 (11) Resistance to alkali ( Under coating & Finishing ))	-	500	-
6.9 Table 2 (12) Accelerated storage stability test ( Under coating & Finishing ))	-	1000	-
6.9 Table 2 (13) Keeping properties ( Under coating & Finishing ))	-	3200	-
6.9 Table 2 (14) Wet opacity ( Under coating & Finishing ))	-	500	-
6.7.1.3(QUV apparatus)	-	2500	-
6.2(Condition in container)	-	100	-
7.2(Marking)	-	100	-
7.3(BIS Certification Marking)	-	500	-
6.1.1(General- Rosin test)	-	500	-
6.1.2(Total Non-Volatile Content)	-	500	-
6.7.2(Bulk supply)	-	0.0	NA
6.7.2.1(Bulk supply-Gloss (specular 60º) retention)	-	0	NA
6.7.2.2(Bulk supply- Film characteristics- Colour)	-	0	NA
6.7.2.2(Bulk supply- Film characteristics- Colour)	-	0	NA
6.7.2.2(Bulk supply- Film characteristics-Freedom from Checking)	-	0	NA
6.7.2.2(Bulk supply- Film characteristics-Freedom from Cracking)	-	0	NA
6.7.2.2(Bulk supply- Film characteristics-Freedom from Flaking)	-	0	NA
6.7.2.2(Bulk supply- Film characteristics-Freedom from Chalking)	-	0	NA
6.7.2.2(Bulk supply- Film characteristics-Freedom from Spotting)	-	0	NA
6.7.2.2(Bulk supply- Film characteristics-Freedom from Blisters and Corrosion)	-	0	NA
6.7.2.2(Bulk supply- Film characteristics-Protection against corrosion)	-	0	NA
" 6.9 Table 2, xiii) Keeping properties "("Keeping properties 1. Visual observation (Corrosion and odour of putrefaction, rancidity or souring) [Cl 3.1 of IS 101 (Part 6/Sec 2)]")	-	3200	-
" 6.9 Table 2, xiii) Keeping properties "("Keeping properties 2. Change in skinning [Cl.3.1,Table 1 of IS 101 (Part 6/Sec 2)]")	-	800	-
" 6.9 Table 2, xiii) Keeping properties "("Keeping properties 3. Degree of settling [Cl.3.2,Table 2 of IS 101 (Part 6/Sec 2)]")	-	800	-
" 6.9 Table 2, xiii) Keeping properties "("Keeping properties 4. Observation of dried film [Cl.3.4, Table 1 of IS 101 (Part 6/Sec 2)]")	-	800	-
" 6.9 Table 2, xiii) Keeping properties "("Keeping properties 5. Loss of mass resulting from Storage [Cl.3.5 of IS 101 (Part 6/Sec 2)]")	-	800	Keeping Properties test report will be done after 1 year.

28 Aug, 2028

-
-

8477

ACCURATE TEST SOLUTIONS LLP (F21), NOIDA

8141226

IS 2993 : Part 1 (2024)

a.c. Motor Capacitors Part 1 General - Performance, Testing and Rating - Safety Requirements - Guidance for Installation and Operation ( Third Revision )

425000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.1(General)	-	1000	5% discount for BIS
5.5(Tangent of loss angle)	-	4000	5% discount for BIS
5.7("Voltage test between terminals ")	-	10000	5% discount for BIS
5.8(Voltage test between terminals and case)	-	6000	5% discount for BIS
5.9(Capacitance measurement)	-	25000	5% discount for BIS
5.9(Capacitance measurement)	-	25000	5% discount for BIS
5.1(Check of dimensions)	-	6000	5% discount for BIS
5.11(Mechanical tests)	-	25000	5% discount for BIS
5.12(Sealing test)	-	15000	5% discount for BIS
5.13(Endurance test)	-	100000	5% discount for BIS Class A: 100000 Class B: 90000 Class C: 75000 Class D: 55000
5.14(Damp heat test)	-	50000	5% discount for BIS
5.15(Self-healing test)	-	75000	5% discount for BIS
5.16(Destruction test)	-	80000	5% discount for BIS
5.17(Resistance to heat, fire and tracking)	-	9000	5% discount for BIS
5.17.1(Ball-pressure test)	-	3000	5% discount for BIS
5.17.2(Glow-wire test)	-	3000	5% discount for BIS
5.17.3(Tracking test)	-	3000	5% discount for BIS
6.1(Maximum permissible voltage)	-	1000	5% discount for BIS
6.2("Maximum permissible current ")	-	1000	5% discount for BIS
6.3(Maximum permissible reactive output)	-	1000	5% discount for BIS
7(Safety requirements)	-	10000	5% discount for BIS
7.1(Requirements for Creepage distances and clearances)	-	2000	5% discount for BIS
7.2(Terminals and connecting cables)	-	6000	5% discount for BIS
7.3(Earth connections)	-	1000	5% discount for BIS
7.4(Discharge devices)	-	1000	5% discount for BIS
8(Marking)	-	1000	5% discount for BIS
9.2.1(Measurements of working voltage)	-	1000	5% discount for BIS
9.2.2(Influence of capacitance)	-	1000	5% discount for BIS
9.3(Checking capacitor temperature)	-	1000	5% discount for BIS
9.4(Checking transients)	-	1000	5% discount for BIS
9.5(Leakage current)	-	1000	5% discount for BIS

04 Jul, 2027

-
Included.w.e.f.05.11.2024

8478

Sleen India Biz venture Private Limited, Agra

9139736

IS 17630 (2021)

Medical Textiles Bedsheet and Pillow Cover Specification

Medical Textile

21000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(WORKMANSHIP AND FINISH)	-	200	-
6(GENERAL REQUIREMENTS - Fabric Washing & Tumble Drying)	-	300	-
6- Table 1- i)(GENERAL REQUIREMENTS - Colour fastness to rubbing a) Dry 4 or better b) Wet)	-	500	-
6- Table 1- ii)(GENERAL REQUIREMENTS - Colour fastness to perspiration (acidic and alkaline) a) Colour change b) Staining)	-	1000	-
6- Table 1- iii)(GENERAL REQUIREMENTS - Colour fastness to washing a) Colour change b) Staining)	-	1000	-
6- Table 1- iv)(GENERAL REQUIREMENTS - Colour fastness to light Color change)	-	500	-
6- Table 1- v)(GENERAL REQUIREMENTS - Dimensional stability to washing, percentage Length and width)	-	500	-
6- Table 1- vi)(GENERAL REQUIREMENTS - Pilling resistance)	-	500	-
6- Table 1- vii)(GENERAL REQUIREMENTS - Scouring loss, percent, Max (for cotton))	-	1000	-
7.1- Table 2- i)(PERFORMANCE REQUIREMENTS - Tensile strength (dry and wet) (N))	-	500	-
7.1- Table 2- ii)(PERFORMANCE REQUIREMENTS - Bursting strength (dry and wet) (kPa))	-	500	-
7.1- Table 2- iii)(PERFORMANCE REQUIREMENTS - Seam strength (dry and wet) (N))	-	500	-
7.1- Table 2- iv)(PERFORMANCE REQUIREMENTS - pH)	-	1000	-
7.1- Table 2- v)(PERFORMANCE REQUIREMENTS - Water soluble substance, percent)	-	1000	-
7.1- Table 2- vi)(PERFORMANCE REQUIREMENTS - Cleanliness–microbial (CFU/100 cm2))	-	2000	-
7.1- Table 2- vii)(PERFORMANCE REQUIREMENTS - Particle release [log10 (lint count)])	-	4000	-
7.1- Table 2- ix)(PERFORMANCE REQUIREMENTS - Moisture vapour transmission rate (Max))	-	0	This clause is under exclusion.
7.2(The performance requirements of reusable products shall have to be met after declared wash and sterilization cycle)	-	500	-
8.2(PACKAGING of Products STERILIZATION of Products)	-	500	-
9(MARKING)	-	500	-
5(WORKMANSHIP AND FINISH)	-	0	Repeated Clause.
6(GENERAL REQUIREMENTS - Fabric Washing & Tumble Drying)	-	0	Repeated Clause.
6- Table 1- i)(GENERAL REQUIREMENTS - Colour fastness to rubbing a) Dry 4 or better b) Wet)	-	0	Repeated Clause.
6- Table 1- ii)(GENERAL REQUIREMENTS - Colour fastness to perspiration (acidic and alkaline) a) Colour change b) Staining)	-	0	Repeated Clause.
6- Table 1- iii)(GENERAL REQUIREMENTS - Colour fastness to washing a) Colour change b) Staining)	-	0	Repeated Clause.
6- Table 1- iv)(GENERAL REQUIREMENTS - Colour fastness to light Color change)	-	0	Repeated Clause.
6- Table 1- v)(GENERAL REQUIREMENTS - Dimensional stability to washing, percentage Length and width)	-	0	Repeated Clause.
6- Table 1- vi)(GENERAL REQUIREMENTS - Pilling resistance)	-	0	Repeated Clause.
6- Table 1- vii)(GENERAL REQUIREMENTS - Scouring loss, percent, Max (for cotton))	-	0	Repeated Clause.
7.1- Table 2- i)(PERFORMANCE REQUIREMENTS - Tensile strength (dry and wet) (N))	-	0	Repeated Clause.
7.1- Table 2- ii)(PERFORMANCE REQUIREMENTS - Bursting strength (dry and wet) (kPa))	-	0	Repeated Clause.
7.1- Table 2- iii)(PERFORMANCE REQUIREMENTS - Seam strength (dry and wet) (N))	-	0	Repeated Clause.
7.1- Table 2- iv)(PERFORMANCE REQUIREMENTS - pH)	-	0	Repeated Clause.
7.1- Table 2- v)(PERFORMANCE REQUIREMENTS - Water soluble substance, percent)	-	0	Repeated Clause.
7.1- Table 2- vi)(PERFORMANCE REQUIREMENTS - Cleanliness–microbial (CFU/100 cm2))	-	0	Repeated Clause.
7.1- Table 2- vii)(PERFORMANCE REQUIREMENTS - Particle release [log10 (lint count)])	-	0	Repeated Clause.
7.1- Table 2- ix)(PERFORMANCE REQUIREMENTS - Moisture vapour transmission rate (Max))	-	0	Repeated Clause.
7.2(The performance requirements of reusable products shall have to be met after declared wash and sterilization cycle)	-	0	Repeated Clause.
8.2(PACKAGING of Products STERILIZATION of Products)	-	0	Repeated Clause.
9(MARKING)	-	0	Repeated Clause.
5(WORKMANSHIP AND FINISH)	-	0	Repeated Clause.
6(GENERAL REQUIREMENTS - Fabric Washing & Tumble Drying)	-	0	Repeated Clause.
6- Table 1- i)(GENERAL REQUIREMENTS - Colour fastness to rubbing a) Dry 4 or better b) Wet)	-	0	Repeated Clause.
6- Table 1- ii)(GENERAL REQUIREMENTS - Colour fastness to perspiration (acidic and alkaline) a) Colour change b) Staining)	-	0	Repeated Clause.
6- Table 1- iii)(GENERAL REQUIREMENTS - Colour fastness to washing a) Colour change b) Staining)	-	0	Repeated Clause.
6- Table 1- iv)(GENERAL REQUIREMENTS - Colour fastness to light Color change)	-	0	Repeated Clause.
6- Table 1- v)(GENERAL REQUIREMENTS - Dimensional stability to washing, percentage Length and width)	-	0	Repeated Clause.
6- Table 1- vi)(GENERAL REQUIREMENTS - Pilling resistance)	-	0	Repeated Clause.
6- Table 1- vii)(GENERAL REQUIREMENTS - Scouring loss, percent, Max (for cotton))	-	0	Repeated Clause.
7.1- Table 2- i)(PERFORMANCE REQUIREMENTS - Tensile strength (dry and wet) (N))	-	0	Repeated Clause.
7.1- Table 2- ii)(PERFORMANCE REQUIREMENTS - Bursting strength (dry and wet) (kPa))	-	0	Repeated Clause.
7.1- Table 2- iii)(PERFORMANCE REQUIREMENTS - Seam strength (dry and wet) (N))	-	0	Repeated Clause.
7.1- Table 2- iv)(PERFORMANCE REQUIREMENTS - pH)	-	0	Repeated Clause.
7.1- Table 2- v)(PERFORMANCE REQUIREMENTS - Water soluble substance, percent)	-	0	Repeated Clause.
7.1- Table 2- vi)(PERFORMANCE REQUIREMENTS - Cleanliness–microbial (CFU/100 cm2))	-	0	Repeated Clause.
7.1- Table 2- vii)(PERFORMANCE REQUIREMENTS - Particle release [log10 (lint count)])	-	0	Repeated Clause.
7.1- Table 2- ix)(PERFORMANCE REQUIREMENTS - Moisture vapour transmission rate (Max))	-	0	Repeated Clause.
7.2(The performance requirements of reusable products shall have to be met after declared wash and sterilization cycle)	-	0	Repeated Clause.
8.2(PACKAGING of Products STERILIZATION of Products)	-	0	Repeated Clause.
9(MARKING)	-	0	Repeated Clause.
5(WORKMANSHIP AND FINISH)	-	0	Repeated Clause.
6(GENERAL REQUIREMENTS - Fabric Washing & Tumble Drying)	-	0	Repeated Clause.
6- Table 1- i)(GENERAL REQUIREMENTS - Colour fastness to rubbing a) Dry 4 or better b) Wet)	-	0	Repeated Clause.
6- Table 1- ii)(GENERAL REQUIREMENTS - Colour fastness to perspiration (acidic and alkaline) a) Colour change b) Staining)	-	0	Repeated Clause.
6- Table 1- iii)(GENERAL REQUIREMENTS - Colour fastness to washing a) Colour change b) Staining)	-	0	Repeated Clause.
6- Table 1- iv)(GENERAL REQUIREMENTS - Colour fastness to light Color change)	-	0	Repeated Clause.
6- Table 1- v)(GENERAL REQUIREMENTS - Dimensional stability to washing, percentage Length and width)	-	0	Repeated Clause.
6- Table 1- vi)(GENERAL REQUIREMENTS - Pilling resistance)	-	0	Repeated Clause.
6- Table 1- vii)(GENERAL REQUIREMENTS - Scouring loss, percent, Max (for cotton))	-	0	Repeated Clause.
7.1- Table 2- i)(PERFORMANCE REQUIREMENTS - Tensile strength (dry and wet) (N))	-	0	Repeated Clause.
7.1- Table 2- ii)(PERFORMANCE REQUIREMENTS - Bursting strength (dry and wet) (kPa))	-	0	Repeated Clause.
7.1- Table 2- iii)(PERFORMANCE REQUIREMENTS - Seam strength (dry and wet) (N))	-	0	Repeated Clause.
7.1- Table 2- iv)(PERFORMANCE REQUIREMENTS - pH)	-	0	Repeated Clause.
7.1- Table 2- v)(PERFORMANCE REQUIREMENTS - Water soluble substance, percent)	-	0	Repeated Clause.
7.1- Table 2- vi)(PERFORMANCE REQUIREMENTS - Cleanliness–microbial (CFU/100 cm2))	-	0	Repeated Clause.
7.1- Table 2- vii)(PERFORMANCE REQUIREMENTS - Particle release [log10 (lint count)])	-	0	Repeated Clause.
7.1- Table 2- ix)(PERFORMANCE REQUIREMENTS - Moisture vapour transmission rate (Max))	-	0	Repeated Clause.
7.2(The performance requirements of reusable products shall have to be met after declared wash and sterilization cycle)	-	0	Repeated Clause.
8.2(PACKAGING of Products STERILIZATION of Products)	-	0	Repeated Clause.
9(MARKING)	-	0	Repeated Clause.

-
Included w.e.f.19.05.2025 Exclusion 7.1- Table 2- viii) (PERFORMANCE REQUIREMENTS - Biocompatibility Evaluation a) Cytotoxicity b) Irritation and skin sensitization) 7.1- Table 2- ix) (PERFORMANCE REQUIREMENTS - Moisture vapour transmission rate (Max))

8479

Sleen India Biz venture Private Limited, Agra

9139736

IS 17349 (2020)

Medical textiles – Shoe covers – Specification

Medical Textile

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Workmanship and finish)	-	500	-
5.2 - Table 1 - (i)(Cleanliness - Microbial)	-	3500	-
5.2 - Table 1 - (ii)(Tensile Strength)	-	500	-
5.2 - Table 1 - (iii)(Bursting Strength)	-	500	-
6(Packing)	-	500	-
7(Marking)	-	500	-
5(Requirements)	-	0	Repeated clause.
5.1(Workmanship and Finish)	-	0	Repeated clause.
5.2- Table 1- i)(Cleanliness – Microbial)	-	0	Repeated clause.
5.2- Table 1- ii)(Tensile strength)	-	0	Repeated clause.
5.2- Table 1- iii)(Bursting strength)	-	0	Repeated clause.
6(Packing)	-	0	Repeated clause.
7(Marking)	-	0	Repeated clause.
5.1(Workmanship and finish)	-	0	Repeated clause.
5.2 - Table 1 - (i)(Cleanliness - Microbial)	-	0	Repeated clause.
5.2 - Table 1 - (ii)(Tensile Strength)	-	0	Repeated clause.
5.2 - Table 1 - (iii)(Bursting Strength)	-	0	Repeated clause.
6(Packing)	-	0	Repeated clause.
7(Marking)	-	0	Repeated clause.
5(Requirements)	-	0	Repeated clause.
5.1(Workmanship and Finish)	-	0	Repeated clause.
5.2- Table 1- i)(Cleanliness – Microbial)	-	0	Repeated clause.
5.2- Table 1- ii)(Tensile strength)	-	0	Repeated clause.
5.2- Table 1- iii)(Bursting strength)	-	0	Repeated clause.
6(Packing)	-	0	Repeated clause.
7(Marking)	-	0	Repeated clause.
5.1(Workmanship and finish)	-	0	Repeated clause.
5.2 - Table 1 - (i)(Cleanliness - Microbial)	-	0	Repeated clause.
5.2 - Table 1 - (ii)(Tensile Strength)	-	0	Repeated clause.
5.2 - Table 1 - (iii)(Bursting Strength)	-	0	Repeated clause.
6(Packing)	-	0	Repeated clause.
7(Marking)	-	0	Repeated clause.
5(Requirements)	-	0	Repeated clause.
5.1(Workmanship and Finish)	-	0	Repeated clause.
5.2- Table 1- i)(Cleanliness – Microbial)	-	0	Repeated clause.
5.2- Table 1- ii)(Tensile strength)	-	0	Repeated clause.
5.2- Table 1- iii)(Bursting strength)	-	0	Repeated clause.
6(Packing)	-	0	Repeated clause.
7(Marking)	-	0	Repeated clause.

-
Included w.e.f 03.03.2025

8480

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 4509 (1992)

Ring slugging wrenches (Spanners) - specification (First Revision)

ring slugging wrenches

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Dimensions- s)	-	10000	-
3(Dimensions- a)	-	10000	-
3(Dimensions- b)	-	10000	-
3(Dimensions- l)	-	10000	-
5(Hardness)	-	10000	-
6(Workmanship and Finish)	-	10000	-
7(PRESERVATION AND PACKING)	-	10000	-
9(Designation)	-	10000	-
4(Chemical Test)	-	10000	-

-
Included w.e.f.12.11.2024

8481

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 4508 (1992)

Open ended slugging wrenches (Spanners) - specification (First Revision)

open ended slugging wrenches

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Dimensions- s)	-	10000	-
3(Dimensions- a)	-	10000	-
3(Dimensions- b)	-	10000	-
3(Dimensions- l)	-	10000	-
5(Hardness)	-	10000	-
6(Workmanship and Finish)	-	10000	-
7(PRESERVATION AND PACKING)	-	10000	-
9(Designation)	-	10000	-

-
included w.e.f.12.11.2024

8482

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 4123 (1982)

Specification for chain pipe wrenches (First Revision)

chain pipe wrenches

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3 Table 1(Dimensions- Nominal Size)	-	15000	-
3 Table 1(Dimensions- Capacity, D min)	-	15000	-
3 Table 1(Dimensions- Capacity, D max)	-	15000	-
3 Table 1(Dimensions- Length , L)	-	15000	-
3 Table 1(Dimensions- Length of Jaw, L1)	-	15000	-
3 Table 1(Dimensions- Width of Jaw, E)	-	15000	-
3 Table 1(Dimensions- Dia of Handle, d)	-	15000	-
3 Table 1(Dimensions- Thickness of Jaw, T)	-	15000	-
3 Table 1(Dimensions- Length of Chain)	-	15000	-
3 Table 1(Dimensions- Chain Pitch, P)	-	15000	-
5(Hardness- Jaws)	-	15000	-
6(Construction)	-	15000	-
6(Construction)	-	15000	-
6.1(Construction- Handel)	-	15000	-
6.2(Construction- Jaws)	-	15000	-
6.3(Construction- Chain)	-	15000	-
7.1(Workmanship and Finish )	-	15000	-
7.2(Workmanship and Finish )	-	15000	-
7.2(Workmanship and Finish )	-	15000	-
9(Test)	-	15000	-

-
Included w.e.f.12.11.2024

8483

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 6149 (1984)

Specification for single - Ended open - Jaw adjustable wrenches (First Revision)

Single - Ended open - Jaw adjustable wrenches

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2(Type)	-	15000	-
3(Grades)	-	15000	-
4 Table-1(Dimensions- Nominal Size)	-	15000	-
4 Table-1(Dimensions- l)	-	15000	-
4 Table-1(Dimensions- s)	-	15000	-
4 Table-1(Dimensions- a)	-	15000	-
4 Table-1(Dimensions- b)	-	15000	-
4 Table-1(Dimensions- t)	-	15000	-
4 Table-1(Dimensions- d)	-	15000	-
4 Table-1(Dimensions- Opening of adjustable jaws)	-	15000	-
6(Hardness- Frame, handle and Jaw)	-	15000	-
6(Hardness- Worm)	-	15000	-
6(Hardness- Worm pin)	-	15000	-
7(Manufacture,Workmanship & Finish)	-	15000	-
7(Manufacture,Workmanship & Finish)	-	15000	-
7(Manufacture,Workmanship & Finish)	-	15000	-
7(Manufacture,Workmanship & Finish)	-	15000	-
7(Manufacture,Workmanship & Finish)	-	15000	-
8(Longitudinal Play of Adjustable Jaw)	-	15000	-
8(Transverse Play of Adjustable Jaw)	-	15000	-
8(Torque)	-	15000	-
5(Chemical Composition)	-	15000	-

-
Included w.e.f.12.11.2024

8484

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 2029 (1998)

Ring wrenches (Spanners) - Specification (Fourth Revision)

ring wrenches

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3, Table-1(Dimensions- s1)	-	14000	-
3, Table-1(Dimensions- s2)	-	14000	-
3, Table-1(Dimensions- a)	-	14000	-
3, Table-1(Dimensions- b1)	-	14000	-
3, Table-1(Dimensions- b2)	-	14000	-
3, Table-1(Dimensions- L)	-	14000	-
5(Hardness)	-	14000	-
6(Workmanship and Finish)	-	14000	-
6(Workmanship and Finish)	-	14000	-
6(Torque Testing)	-	14000	-
7(Designation)	-	14000	-
Cl.4(CARBON)	-	14000	-
Cl.4(SULPHUR)	-	14000	-
Cl.4(PHOSPHURS)	-	14000	-
Cl.4(MANGANESE)	-	14000	-
Cl.4(NITROGEN)	-	14000	-
Cl.4(SILICON)	-	14000	-
Cl.4(CHROMIUM)	-	14000	-
Cl.4(NICKEL)	-	14000	-
Cl.4(VANADIUM)	-	14000	-
Cl.4(MOLYBDENUM)	-	14000	-
Cl 4(Carbon- IS 228(Part 1))	-	14000	-
Cl 4(Sulphur- IS 228(Part 9))	-	14000	-
Cl 4(Phosphorous- IS 228(Part 3))	-	14000	-
Cl 4(Manganese- IS 228(Part 2))	-	14000	-
Cl 4(Silicon- IS 228(Part 2))	-	14000	-
Cl.4(ALUMINIUM)	-	14000	-

-
Included w.e.f.12.11.2024

8485

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 2028 (2004)

Open jaw wrenches (Spanners) - Specification (Fijih Revision)

open jaw wrenches

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Dimensions- a)	-	14000	-
3.1(Dimensions- b)	-	14000	-
3.1(Dimensions- l)	-	14000	-
3.2, 3.3, 3.4(Dimensions- a)	-	14000	-
3.2, 3.3, 3.4(Dimensions- b1)	-	14000	-
3.2, 3.3, 3.4(Dimensions- b2)	-	14000	-
3.2, 3.3, 3.4(Dimensions- l)	-	14000	-
5(Hardness- upto 32 mm)	-	14000	-
5(Hardness- over 32 mm)	-	14000	-
6(Workmanship And Finish)	-	14000	-
6(Workmanship And Finish)	-	14000	-
6(Workmanship And Finish)	-	14000	-
8(Tourque test)	-	14000	-
4(Chemical Composition)	-	14000	-

-
Included w.e.f.12.11.2024

8486

IDMA LABORATORIES LIMITED, PANCHKULA

9123236

IS 3898 (2024)

Zineb technical - Specification Second Revision

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Description)	-	500	-
3.2, 7.1 Table - 1 (i)(Zineb Content)	-	4000	-
3.2, 7.1 Table - 1 (ii)(Zinc content)	-	2500	-
3.2, 7.1 Table - 1 (iii)(Moisture Content)	-	1500	-
3.1(Description)	-	-	-
3.2, 7.1 Table - 1 (i)(Zineb Content)	-	-	-
3.2, 7.1 Table - 1 (ii)(Zinc content)	-	-	-
3.2, 7.1 Table - 1 (iii)(Moisture Content)	-	-	-

31 Dec, 2026

-
Included w.e.f.10.12.2024

8487

FARE Labs Pvt. Ltd. (8166516), Gurugram

8166516

IS 14543 (2024)

Packaged Drinking Water Other than Packaged Natural Mineral Water Specification Third Revision

6500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-5.3, Table-4 (i)(Alpha emitters, Becquerel (Bq/l))	-	3250		30% Discount for BIS Samples
Cl-5.3, Table-4 (ii)(Beta emitters, Becquerel (Bq/l),)	-	3250		30% Discount for BIS Samples

25 Nov, 2026

-
Included w.e.f. 20.11.2024 For Alpha Emitters and Beta Emitters only.

8488

Sleen India Biz venture Private Limited, Agra

9139736

IS 17509 (2021)

Disposable Baby Diaper Specification

Medical Textile

21200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause no. 3(Material)	-	200	-
Clause no. 3.1(Top Cover / Top Sheet)	-	250	-
Clause no. 3.2(Absorbent Core)	-	500	-
Clause no. 3.3(Outer Protective Barrier or Back Sheet)	-	500	-
Clause no. 4(Fastening & Securing Mechanism)	-	500	-
Clause no. 5(ManufactureWorkmanship and Finish)	-	250	-
Clause no.6(Type and Size: FOR X LARGE)	-	500	Combined test price for cl. 6 is 500/-.
Clause no.6(Diaper Length)	-	0	Combined test price for cl. 6 is 500/-.
Clause no.6(Diaper Width)	-	0	Combined test price for cl. 6 is 500/-.
Clause no.6(Diaper Crotch)	-	0	Combined test price for cl. 6 is 500/-.
Clause no.6(Absorbent Core Length)	-	0	Combined test price for cl. 6 is 500/-.
Clause no.6(Absorbent Core Width Back)	-	0	Combined test price for cl. 6 is 500/-.
1()	-	0	Combined test price for cl. 6 is 500/-.
Clause no.6(Absorbent Core Length)	-	0	Combined test price for cl. 6 is 500/-.
Clause no.6(Absorbent Core Width Front)	-	0	Combined test price for cl. 6 is 500/-.
Clause no.6(Core Cortch)	-	0	Combined test price for cl. 6 is 500/-.
Clause no.7(Performance Requirements)	-	500	-
Clause no.7.1(pH Value)	-	1000	-
Clause no.7.2 Table-2(Minimum absorption Capacity (X Large))	-	1000	-
Clause no.7.2 Table-2(Rewet under Load (All Sizes))	-	500	-
Clause no.7.2 Table-2(Rate of Absorption (All Sizes))	-	1000	-
Clause no.7.3(Hygiene Testing Requirement, Total Viable Count)	-	4300	-
Clause no.7.3(Hygiene Testing Requirement, Staphylococcus Aureus)	-	2200	-
Clause no.7.5(Phthalate Test)	-	4000	-
Clause no.7.7(Anti-Bacterial Activity Value (optional))	-	0	This test facility is not available.
9 & 9.1(Marking)	-	250	-
10(Packing)	-	250	-
CL 7.3(Total Viable Count)	-	4300	Repeated Clause.
CL 7.3(Staphylococcus aureus)	-	2200	Repeated Clause.
CL 7.7(Anti-Bacterial Activity Value (Optional))	-	0	This test facility is not available.
Clause no. 3(Material)	-	0	Repeated Clause.
Clause no. 3.1(Top Cover / Top Sheet)	-	0	Repeated Clause.
Clause no. 3.2(Absorbent Core)	-	0	Repeated Clause.
Clause no. 3.3(Outer Protective Barrier or Back Sheet)	-	0	Repeated Clause.
Clause no. 4(Fastening & Securing Mechanism)	-	0	Repeated Clause.
Clause no. 5(ManufactureWorkmanship and Finish)	-	0	Repeated Clause.
Clause no.6(Type and Size: FOR X LARGE)	-	0	Repeated Clause.
Clause no.6(Diaper Length)	-	0	Repeated Clause.
Clause no.6(Diaper Width)	-	0	Repeated Clause.
Clause no.6(Diaper Crotch)	-	0	Repeated Clause.
Clause no.6(Absorbent Core Length)	-	0	Repeated Clause.
Clause no.6(Absorbent Core Width Back)	-	0	Repeated Clause.
1()	-	0	Repeated Clause.
Clause no.6(Absorbent Core Length)	-	0	Repeated Clause.
Clause no.6(Absorbent Core Width Front)	-	0	Repeated Clause.
Clause no.6(Core Cortch)	-	0	Repeated Clause.
Clause no.7(Performance Requirements)	-	0	Repeated Clause.
Clause no.7.1(pH Value)	-	0	Repeated Clause.
Clause no.7.2 Table-2(Minimum absorption Capacity (X Large))	-	0	Repeated Clause.
Clause no.7.2 Table-2(Rewet under Load (All Sizes))	-	0	Repeated Clause.
Clause no.7.2 Table-2(Rate of Absorption (All Sizes))	-	0	Repeated Clause.
Clause no.7.3(Hygiene Testing Requirement, Total Viable Count)	-	0	Repeated Clause.
Clause no.7.3(Hygiene Testing Requirement, Staphylococcus Aureus)	-	0	Repeated Clause.
Clause no.7.5(Phthalate Test)	-	0	Repeated Clause.
Clause no.7.7(Anti-Bacterial Activity Value (optional))	-	0	This test facility is not available.
9 & 9.1(Marking)	-	0	Repeated Clause.
10(Packing)	-	0	Repeated Clause.
CL 7.3(Total Viable Count)	-	0	Repeated Clause.
CL 7.3(Staphylococcus aureus)	-	0	Repeated Clause.
CL 7.7(Anti-Bacterial Activity Value (Optional))	-	0	This test facility is not available.
Clause no. 3(Material)	-	0	Repeated Clause.
Clause no. 3.1(Top Cover / Top Sheet)	-	0	Repeated Clause.
Clause no. 3.2(Absorbent Core)	-	0	Repeated Clause.
Clause no. 3.3(Outer Protective Barrier or Back Sheet)	-	0	Repeated Clause.
Clause no. 4(Fastening & Securing Mechanism)	-	0	Repeated Clause.
Clause no. 5(ManufactureWorkmanship and Finish)	-	0	Repeated Clause.
Clause no.6(Type and Size: FOR X LARGE)	-	0	Repeated Clause.
Clause no.6(Diaper Length)	-	0	Repeated Clause.
Clause no.6(Diaper Width)	-	0	Repeated Clause.
Clause no.6(Diaper Crotch)	-	0	Repeated Clause.
Clause no.6(Absorbent Core Length)	-	0	Repeated Clause.
Clause no.6(Absorbent Core Width Back)	-	0	Repeated Clause.
1()	-	0	Repeated Clause.
Clause no.6(Absorbent Core Length)	-	0	Repeated Clause.
Clause no.6(Absorbent Core Width Front)	-	0	Repeated Clause.
Clause no.6(Core Cortch)	-	0	Repeated Clause.
Clause no.7(Performance Requirements)	-	0	Repeated Clause.
Clause no.7.1(pH Value)	-	0	Repeated Clause.
Clause no.7.2 Table-2(Minimum absorption Capacity (X Large))	-	0	Repeated Clause.
Clause no.7.2 Table-2(Rewet under Load (All Sizes))	-	0	Repeated Clause.
Clause no.7.2 Table-2(Rate of Absorption (All Sizes))	-	0	Repeated Clause.
Clause no.7.3(Hygiene Testing Requirement, Total Viable Count)	-	0	Repeated Clause.
Clause no.7.3(Hygiene Testing Requirement, Staphylococcus Aureus)	-	0	Repeated Clause.
Clause no.7.5(Phthalate Test)	-	0	Repeated Clause.
Clause no.7.7(Anti-Bacterial Activity Value (optional))	-	0	This test facility is not available.
9 & 9.1(Marking)	-	0	Repeated Clause.
10(Packing)	-	0	Repeated Clause.
CL 7.3(Total Viable Count)	-	0	Repeated Clause.
CL 7.3(Staphylococcus aureus)	-	0	Repeated Clause.
CL 7.7(Anti-Bacterial Activity Value (Optional))	-	0	This test facility is not available.
Clause no. 3(Material)	-	0	Repeated Clause.
Clause no. 3.1(Top Cover / Top Sheet)	-	0	Repeated Clause.
Clause no. 3.2(Absorbent Core)	-	0	Repeated Clause.
Clause no. 3.3(Outer Protective Barrier or Back Sheet)	-	0	Repeated Clause.
Clause no. 4(Fastening & Securing Mechanism)	-	0	Repeated Clause.
Clause no. 5(ManufactureWorkmanship and Finish)	-	0	Repeated Clause.
Clause no.6(Type and Size: FOR X LARGE)	-	0	Repeated Clause.
Clause no.6(Diaper Length)	-	0	Repeated Clause.
Clause no.6(Diaper Width)	-	0	Repeated Clause.
Clause no.6(Diaper Crotch)	-	0	Repeated Clause.
Clause no.6(Absorbent Core Length)	-	0	Repeated Clause.
Clause no.6(Absorbent Core Width Back)	-	0	Repeated Clause.
1()	-	0	Repeated Clause.
Clause no.6(Absorbent Core Length)	-	0	Repeated Clause.
Clause no.6(Absorbent Core Width Front)	-	0	Repeated Clause.
Clause no.6(Core Cortch)	-	0	Repeated Clause.
Clause no.7(Performance Requirements)	-	0	Repeated Clause.
Clause no.7.1(pH Value)	-	0	Repeated Clause.
Clause no.7.2 Table-2(Minimum absorption Capacity (X Large))	-	0	Repeated Clause.
Clause no.7.2 Table-2(Rewet under Load (All Sizes))	-	0	Repeated Clause.
Clause no.7.2 Table-2(Rate of Absorption (All Sizes))	-	0	Repeated Clause.
Clause no.7.3(Hygiene Testing Requirement, Total Viable Count)	-	0	Repeated Clause.
Clause no.7.3(Hygiene Testing Requirement, Staphylococcus Aureus)	-	0	Repeated Clause.
Clause no.7.5(Phthalate Test)	-	0	Repeated Clause.
9 & 9.1(Marking)	-	0	Repeated Clause.
10(Packing)	-	0	Repeated Clause.
CL 7.3(Total Viable Count)	-	0	Repeated Clause.
CL 7.3(Staphylococcus aureus)	-	0	Repeated Clause.
Clause no. 3(Material)	-	0	Repeated Clause.
Clause no. 3.1(Top Cover / Top Sheet)	-	0	Repeated Clause.
Clause no. 3.2(Absorbent Core)	-	0	Repeated Clause.
Clause no. 3.3(Outer Protective Barrier or Back Sheet)	-	0	Repeated Clause.
Clause no. 4(Fastening & Securing Mechanism)	-	0	Repeated Clause.
Clause no. 5(ManufactureWorkmanship and Finish)	-	0	Repeated Clause.
Clause no.6(Type and Size: FOR X LARGE)	-	0	Repeated Clause.
Clause no.6(Diaper Length)	-	0	Repeated Clause.
Clause no.6(Diaper Width)	-	0	Repeated Clause.
Clause no.6(Diaper Crotch)	-	0	Repeated Clause.
Clause no.6(Absorbent Core Length)	-	0	Repeated Clause.
Clause no.6(Absorbent Core Width Back)	-	0	Repeated Clause.
1()	-	0	Repeated Clause.
Clause no.6(Absorbent Core Length)	-	0	Repeated Clause.
Clause no.6(Absorbent Core Width Front)	-	0	Repeated Clause.
Clause no.6(Core Cortch)	-	0	Repeated Clause.
Clause no.7(Performance Requirements)	-	0	Repeated Clause.
Clause no.7.1(pH Value)	-	0	Repeated Clause.
Clause no.7.2 Table-2(Minimum absorption Capacity (X Large))	-	0	Repeated Clause.
Clause no.7.2 Table-2(Rewet under Load (All Sizes))	-	0	Repeated Clause.
Clause no.7.2 Table-2(Rate of Absorption (All Sizes))	-	0	Repeated Clause.
Clause no.7.3(Hygiene Testing Requirement, Total Viable Count)	-	0	Repeated Clause.
Clause no.7.3(Hygiene Testing Requirement, Staphylococcus Aureus)	-	0	Repeated Clause.
Clause no.7.5(Phthalate Test)	-	0	Repeated Clause.
9 & 9.1(Marking)	-	0	Repeated Clause.
10(Packing)	-	0	Repeated Clause.
CL 7.3(Total Viable Count)	-	0	Repeated Clause.
CL 7.3(Staphylococcus aureus)	-	0	Repeated Clause.

-
Included w.e.f 03.03.2025 Exclusion : Clause no.7.4 (Biocompatibility Evaluation- Cytotoxicity), Clause no. 7.4 (Biocompatibility Evaluation- Irritation), Clause no.7.4 (Biocompatibility Evaluation- Skin Sensitization), CL 7.4 (Biocompatibility Evaluation - Cytotoxicity, Irritation and Skin Sensitization), CL 7.6 (Biodegradability and Compostability (Optional)), CL 7.7 (Anti-Bacterial Activity Value (Optional))

8489

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 7494 (2023)

ALLOYS FOR INTERNAL COMBUSTION ENGINE VALVE APPLICATIONS ï¿½ SPECIFICATION (Second Revision)

VM, VA, VSA, VTA

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause. 5.0(classification.)	-	25000	5% discount for BIS sample
Clause. 5.0(manufacture)	-	25000	5% discount for BIS sample
Clause. 5.0(Product Designations)	-	25000	5% discount for BIS sample
Clause. 7.0(Carbon)	-	25000	5% discount for BIS sample
Clause. 7.0(Silicon)	-	25000	5% discount for BIS sample
Clause. 7.0(Manganese.)	-	25000	5% discount for BIS sample
Clause. 7.0(Phosphorus)	-	25000	5% discount for BIS sample
Clause. 7.0(Chromium)	-	25000	5% discount for BIS sample
Clause. 7.0(Nickel)	-	25000	5% discount for BIS sample
Clause. 7.0(Molybednum)	-	25000	5% discount for BIS sample
Clause. 7.0(Vanadium)	-	25000	5% discount for BIS sample
Clause. 7.0(Neobium)	-	25000	5% discount for BIS sample
Clause. 7.0(Titanium)	-	25000	5% discount for BIS sample
Clause. 7.0(Nitrogen)	-	25000	5% discount for BIS sample
Clause. 7.0(Tungsten.)	-	25000	5% discount for BIS sample
Clause. 7.0(Other)	-	25000	5% discount for BIS sample
Clause. 7.0(Aluminium)	-	25000	5% discount for BIS sample
Clause.9.0(Tensile Test)	-	25000	5% discount for BIS sample
Clause.9.0(Proof Stress)	-	25000	5% discount for BIS sample
Clause.9.0(Elongation)	-	25000	5% discount for BIS sample
Clause.9.0(Brinell Hardness)	-	25000	5% discount for BIS sample
Clause.8.0(Freedom from defect)	-	25000	5% discount for BIS sample
Clause.10.0(Grain size)	-	25000	5% discount for BIS sample
Clause.11.0(Non-metallic inclusion.)	-	25000	5% discount for BIS sample
Clause.12.0(Physical propertise)	-	25000	5% discount for BIS sample
Cluase.13.0(Dimensions and tolerances.)	-	25000	5% discount for BIS sample
Clause 16.0(Packing and marking.)	-	25000	5% discount for BIS sample

-
Included w.e.f. 03.10.2024

8490

Pious laboratories Pvt. Ltd., Indore

8183516

IS 7224 (2006)

Iodized salt, vacuum evaporated iodized salt and refined iodized salt - Specification (Second Revision)

8196.54 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause no4.1(Description)	-	98.99	-
Clause 4.3 Table 1(Moisture content)	-	299.99	-
Clause 4.3 Table 1(water insoluble matter)	-	299.99	-
Clause 4.3 Table 1(Chloride Content(as Nacl))	-	322.02	-
Clause 4.3 Table 1(Matter soluble in water other than sodium chloride)	-	325.99	-
Clause 4.3 Table 1(Calcium (as Ca))	-	506.01	-
Clause 4.3 Table 1(Magnesium (as mg))	-	506.02	-
Clause 4.3 Table 1(Sulphate (as SO4 ),)	-	506.01	-
Clause 4.3 Table 1(Iodine content, a) Manufacturers Level )	-	615.99	-
Clause 4.3 Table 1(b) Distribution channel including retailer)	-	615	-
Clause 4.3 Table 1(Alkalinity (as Na2CO3),)	-	500.01	-
Clause 4.3 Table 1(Lead as (Pb))	-	999.99	-
Clause 4.3 Table 1(Arsenic(as As))	-	999.99	-
Clause 4.3 Table 1(Iron(as Fe))	-	999.99	-
Clause 4.2(Particle Size)	-	200.5	-
4.4(Anticaking agents (Potassium Ferrocyanide))	-	400.01	-

07 Jan, 2028

-
-

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number