BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

11379 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

8491

INDIAN TESTING LABORATORY PRIVATE LIMITED

8171306

IS 2347 (2017)

Domestic pressure cooker - Specification (Sixth Revision)

GROUP I, II & III

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.6.2(Tests for Removal of Lid under Pressure For inner Lid Cooker)	-	750	-
8.6.1(Tests for Removal of Lid under Pressure For Outer Lid Cooker)	-	750	-
8.5(Bursting Pressure Test)	-	1000	-
8.4(Test for Safety Pressure Relief Device)	-	750	-
8.3(Operating Test for Pressure Regulating Device)	-	750	-
8.2(Proof Pressure Test)	-	750	-
8.1(Air Pressure Test)	-	750	-
7.4(WORKMANSHIP AND FINISH)	-	250	-
7.3(WORKMANSHIP AND FINISH)	-	250	-
7.2(WORKMANSHIP AND FINISH)	-	250	-
7.1(WORKMANSHIP AND FINISH)	-	250	-
6.4.1.1(Handles and Knobs)	-	4500	-
6.4.1(Handles and Knobs)	-	2500	-
6.3.1(Temperature Responsive Pressure Relief Device)	-	750	-
6.2.2(Safety Relief Device)	-	750	-
6.2.1(Safety Relief Device)	-	750	-
6.1.5(Pressure Regulating Device)	-	750	-
6.1.4(Pressure Regulating Device)	-	750	-
6.1.3(Pressure Regulating Device)	-	750	-
6.1.2(Pressure Regulating Device)	-	750	-
6.1.1(Pressure Regulating Device)	-	750	-
6(CONSTRUCTION)	-	250	-
5.7(Vent Pipe)	-	250	-
5.6(Vent Seal Pin for Pressure Regulating Device)	-	500	-
5.5(Pressure Regulating Device)	-	750	-
5.2(Safety Relief Device)	-	750	-
4.1(Capacity)	-	500	-
8.14(3 Ply Construction Cooker Body)	-	1500	-
8.12(Internal Coating)	-	1000	-
8.11(External Coating )	-	1000	-
8.10 NOTES (3)(Handles of the cooker - Proof Pressure)	-	250	-
8.10 NOTES (4)(Handles of the cooker)	-	2500	-
8.10 NOTES (5)(Handles of the cooker)	-	250	-
8.10 NOTES (6)(Handles of the cooker)	-	500	-
8.10 (a)(Handles of the cooker- Resistance to Burning)	-	250	-
8.10 (b)(Handles of the cooker- Heat Resistance)	-	1500	-
8.10 (c)(Handles of the cooker- Torque Strength)	-	1500	-
8.10 (d)(Handles of the cooker- Bending Strength)	-	1500	-
8.10 (e)(Handles of the cooker- Fatigue Resistance)	-	1500	-
8.10 (f)(Handles of the cooker- Thermal Insualtion Test)	-	1500	-
8.4 Annex H-1.1(Test for SPRD - For Destructible Devices )	-	1000	-
8.4 Annex H-1.2(Test for SPRD - For Resettable Devices )	-	1000	-
5.8(Vent Pipe Nut)	-	1000	-
5.1.1(Body, Lid, Containers and Grid)	-	1000	-
5.1.2(Body, Lid, Containers and Grid)	-	1000	-
5.1.3(Body, Lid, Containers and Grid)	-	1000	-
5.1.4(Body, Lid, Containers and Grid)	-	1000	-
5.3(Gasket)	-	1500	-
5.4(Handles and Knobs)	-	1000	-

15 Aug, 2028

-
for all grades except "for pressure cooker operated by spring loaded mechanism test"

8492

INDIAN TESTING LABORATORY PRIVATE LIMITED

8171306

IS 740 (1977)

Specification for wrought aluminium and aluminium alloy rivet stock for general engineering purposes (Second Revision)

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1, Table 1of IS:740 (Designation & Condition 65032, 'W')(Tensile Strength of Size upto and including 25 mm)	-	1000	-
4.1, Table 1of IS:740 (Designation & Condition 64430, 'W')(Tensile Strength of Size upto and including 25 mm)	-	1000	-
4.1, Table 1of IS:740 (Designation & Condition 55000, 'OD')(Tensile Strength of Size upto and including 25 mm)	-	1000	-
4.1, Table 1of IS:740 (Designation & Condition 55000, 'O or M')(Tensile Strength of Size upto and including 25 mm)	-	1000	-
4.1, Table 1of IS:740 (Designation & Condition 53000, 'OD')(Tensile Strength of Size upto and including 25 mm)	-	1000	-
4.1, Table 1of IS:740 (Designation & Condition 53000, 'O or M')(Tensile Strength of Size upto and including 25 mm)	-	1000	-
4.1, Table 1of IS:740 (Designation & Condition 24345, 'W')(Tensile Strength of Size upto and including 12 mm)	-	1000	-
4.1, Table 1of IS:740 (Designation & Condition 19000, '112')(Tensile Strength of Size upto and including 12 mm)	-	1000	-
4.1, Table 1of IS:740 (Designation 65032)(Aluminium)	-	500	-
4.1, Table 1of IS:740 (Designation 65032)(Either Cr or Mn shall present)	-	500	-
4.1, Table 1of IS:740 (Designation 65032)(Chromium)	-	500	-
4.1, Table 1of IS:740 (Designation 65032)(Titanium and or other grain refining elements)	-	500	-
4.1, Table 1of IS:740 (Designation 65032)(Zinc)	-	500	-
4.1, Table 1of IS:740 (Designation 65032)(Manganese)	-	500	-
4.1, Table 1of IS:740 (Designation 65032)(Iron)	-	500	-
4.1, Table 1of IS:740 (Designation 65032)(Silicon)	-	500	-
4.1, Table 1of IS:740 (Designation 65032)(Magnesium)	-	500	-
4.1, Table 1of IS:740 (Designation 65032)(Copper)	-	500	-
4.1, Table 1of IS:740 (Designation 64430)(Aluminium)	-	500	-
4.1, Table 1of IS:740 (Designation 64430)(Cr+Mn)	-	500	-
4.1, Table 1of IS:740 (Designation 64430)(Chromium)	-	500	-
4.1, Table 1of IS:740 (Designation 64430)(Titanium and or other grain refining elements)	-	500	-
4.1, Table 1of IS:740 (Designation 64430)(Zinc)	-	500	-
4.1, Table 1of IS:740 (Designation 64430)(Manganese)	-	500	-
4.1, Table 1of IS:740 (Designation 64430)(Copper)	-	500	-
4.1, Table 1of IS:740 (Designation 55000)(Aluminium)	-	500	-
4.1, Table 1of IS:740 (Designation 55000)(Cr+Mn)	-	500	-
4.1, Table 1of IS:740 (Designation 55000)(Chromium)	-	500	-
4.1, Table 1of IS:740 (Designation 55000)(Titanium and or other grain refining elements)	-	500	-
4.1, Table 1of IS:740 (Designation 55000)(Zinc)	-	500	-
4.1, Table 1of IS:740 (Designation 55000)(Manganese)	-	500	-
4.1, Table 1of IS:740 (Designation 55000)(Iron)	-	500	-
4.1, Table 1of IS:740 (Designation 55000)(Silicon)	-	500	-
4.1, Table 1of IS:740 (Designation 55000)(Magnesium)	-	500	-
4.1, Table 1of IS:740 (Designation 55000)(Copper)	-	500	-
4.1, Table 1of IS:740 (Designation 53000)(Aluminium)	-	500	-
4.1, Table 1of IS:740 (Designation 53000)(Cr+Mn)	-	500	-
4.1, Table 1of IS:740 (Designation 53000)(Chromium)	-	500	-
4.1, Table 1of IS:740 (Designation 53000)(Titanium and or other grain refining elements)	-	500	-
4.1, Table 1of IS:740 (Designation 53000)(Zinc)	-	500	-
4.1, Table 1of IS:740 (Designation 53000)(Manganese)	-	500	-
4.1, Table 1of IS:740 (Designation 53000)(Iron)	-	500	-
4.1, Table 1of IS:740 (Designation 53000)(Silicon)	-	500	-
4.1, Table 1of IS:740 (Designation 53000)(Magnesium)	-	500	-
4.1, Table 1of IS:740 (Designation 53000)(Copper)	-	500	-
4.1, Table 1of IS:740 (Designation 24345)(Aluminium)	-	500	-
4.1, Table 1of IS:740 (Designation 24345)(Chromium)	-	500	-
4.1, Table 1of IS:740 (Designation 24345)(Titanium and or other grain refining elements)	-	500	-
4.1, Table 1of IS:740 (Designation 24345)(Zinc)	-	500	-
4.1, Table 1of IS:740 (Designation 24345)(Manganese)	-	500	-
4.1, Table 1of IS:740 (Designation 24345)(Iron)	-	500	-
4.1, Table 1of IS:740 (Designation 24345)(Silicon)	-	500	-
4.1, Table 1of IS:740 (Designation 24345)(Magnesium)	-	500	-
4.1, Table 1of IS:740 (Designation 24345)(Copper)	-	500	-
4.1, Table 1of IS:740 (Designation 19000)(Cu+Mg+Si+Fe+Mn+Zn)	-	500	-
4.1, Table 1of IS:740 (Designation 19000)(Aluminium)	-	500	-
4.1, Table 1of IS:740 (Designation 19000)(Zinc)	-	500	-
4.1, Table 1of IS:740 (Designation 19000)(Manganese)	-	500	-
4.1, Table 1of IS:740 (Designation 19000)(Iron)	-	500	-
4.1, Table 1of IS:740 (Designation 19000)(Silicon)	-	500	-
4.1, Table 1of IS:740 (Designation 19000)(Magnesium)	-	500	-
4.1, Table 1of IS:740 (Designation 19000)(Copper)	-	500	-
6(Freedom From Defects)	-	250	-
7(Dmension And Tolerances)	-	250	-
9.2(Head Forming Test)	-	250	-
11(Marking)	-	250	-

15 Aug, 2028

-
-

8493

INDIAN TESTING LABORATORY PRIVATE LIMITED

8171306

IS 13395 (2021)

Performance of Handles and Handle Assemblies Attached to Cookware - Specification ( First Revision )

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(General)	-	500	-
5.2(Bending Strength)	-	2500	-
5.3(Torque Strength)	-	2500	-
5.4(Impact Strength)	-	2000	-
5.5(Fatigue Resistance)	-	2000	-
5.6(Leakage)	-	2000	-
5.7(Thermal Insulation)	-	1500	-
5.8(Heat Resistance)	-	2500	-
5.9(Washing Resistance)	-	2000	-
5.1(Burning Resistance)	-	1500	-
5.1(General)	-	500	-
5.2(Bending strength)	-	2500	-
5.3(Torque strength)	-	2500	-
5.4(Impact strength)	-	2000	-
5.5(Fatigue resistance)	-	2000	-
5.6(Leakage)	-	2000	-
5.7(Thermal insulation)	-	1500	-
5.8(Heat resistance)	-	2500	-
5.9(Washing resistance)	-	2000	-
5.10(Burning resistance)	-	1500	-
4.1(Construction)	-	250	-
4.2(Materials)	-	250	-
4.3(Selection and Size)	-	250	-
4.4(Position of handle and knob with respect to cookware)	-	250	-
4.5(Attachment to cookware)	-	250	-

15 Aug, 2028

-
-

8494

INDIAN TESTING LABORATORY PRIVATE LIMITED

8171306

IS 7466 (1994)

Rubber gaskets for pressure cookers - Specifications (First Revison)

11000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2(Workmanship and Finish )	-	500	-
3.4-Table 1(i)(Requirements of Rubber Used for Gaskets-Hardness IRHD)	-	1000	-
3.4-Table 1(ii)(Requirements of Rubber Used for Gaskets-Tensile strength,)	-	1500	-
3.4-Table 1(iii)(Requirements of Rubber Used for Gaskets-Elongation at break)	-	1000	-
3.4-Table 1(iv-a)(Requirements of Rubber Used for Gaskets-Hardness IRHD(After ageing 3 days in Aie-oven Change From Original Value))	-	2500	-
3.4-Table 1(iv-b)(Requirements of Rubber Used for Gaskets-Tensile strength(After ageing 3 days in Aie-oven Change From Original Value))	-	2500	-
3.4-Table 1(iv-c)(Requirements of Rubber Used for Gaskets-Elongation at break(After ageing 3 days in Aie-oven Change From Original Value))	-	1500	-
3.4-Table 1(v-a)(Requirements of Rubber Used for Gaskets-Hardness IRHD(After ageing in an autoclave Change From Original Value))	-	500	-
3.4-Table 1(v-b)(Requirements of Rubber Used for Gaskets-Tensile strength(After ageing in an autoclave Change From Original Value))	-	1500	-
3.4-Table 1(v-c)(Requirements of Rubber Used for Gaskets-Elongation at break(After ageing in an autoclave Change From Original Value))	-	1000	-
3.4-Table 1(vi)(Compression set)	-	2000	-
3.5-ANNEX C(PERFORMANCE TEST FOR PRESSURE COOKER )	-	2500	-
Clause 4.3 Table 1(Zinc oxide)	-	1500	-
Clause 3.4 Table 1(Heavy metal content)	-	1500	-
3.4. and Table 1 v) d(Requirements of Rubber Used for Gaskets-Volume(After ageing in an autoclave Change From Original Value))	-	1500	-
4.2(Marking)	-	250	-

15 Aug, 2028

-
-

8495

INDIAN TESTING LABORATORY PRIVATE LIMITED

8171306

IS 6911 (2017)

Stainless steel plate, sheet and strip - Specification (Second Revision)

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 7.1 & 7.2 Table 1(Carbon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 7.1 & 7.2 Table 1(Silicon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 7.1 & 7.2 Table 1(Manganese -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 7.1 & 7.2 Table 1(Nickel -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 7.1 & 7.2 Table 1(Chromium -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 7.1 & 7.2 Table 1(Molybdenum -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 7.1 & 7.2 Table 1(Sulphur -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 7.1 & 7.2 Table 1(Phosphorus -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 7.1 & 7.2 Table 1(Nitrogen -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 7.1 & 7.2 Table 1(Copper -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 7.1 & 7.2 Table 1(Others-IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 7.1 & 7.2 Table 1(Titanium-IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 7.1 & 7.2 Table 1(Niobium-IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl.12(Corrosion Resistance- IS 10461(Part1))	-	1000	-
6(Freedom from defects , IS 6911)	-	250	-
10.1,Table 4&Table 6(Tensile Test - IS 1608(Pt -1))	-	1000	-
10.2,Table 4&Table 5(Hardness Test- IS 1500(Pt -1),IS 1501 (Pt-1),IS 1586 (Pt -1))	-	750	-
10.3(Bend Test - IS 1599)	-	500	-
11,Table 7(Erichsen cupping test-IS 10175)	-	750	-
15(Surface Finish)	-	250	-
10.1 Amd 2(Yeild Strength)	-	500	-
10.1 Amd 2(0.2 Percent Proof Stress)	-	500	-
10.1 Amd 2(Elongation)	-	500	-
Clause 17 , Table 9 to Table 19(Dimension (Length))	-	500	-
Clause 17 , Table 9 to Table 19(Dimension (Width))	-	500	-
Clause 17 , Table 9 to Table 19(Dimension (Thickness))	-	500	-
Clause 17 , Table 9 to Table 19(Flatness)	-	300	-
Clause 17 , Table 9 to Table 19(Camber)	-	300	-
4(Supply of Material)	-	250	-
8(Heat Treatment)	-	250	-
19(Marking)	-	250	-

15 Aug, 2028

-
-

8496

INDIAN TESTING LABORATORY PRIVATE LIMITED

8171306

IS 7809 : Part 3 : Sec 1 (1986)

Specification for pressure sensitive adhesive insulating tapes for electrical purposes: Part 3 requirements or individual materials: Sec 1 plasticized polyvinylchloride tapes with non - Thermosetting adhesive (First Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(General Requirments,as per IS 7809 (Part 1 ) :1975 )	-	250	-
Cl.No.3.2(Width)	-	500	-
Cl.No.3.3(Length)	-	500	-
Cl.No.3.4(Thickness)	-	500	-
Cl.No.4.1(Tensile Strength)	-	1500	-
Cl.No.4.2(Adhesion to Steel)	-	1500	-
Cl.No.4.3(Adhesion to backing)	-	1500	-
Cl.No.4.4(Electric Strength at RT)	-	2500	-
Cl.No.4.5(Electric Strength after Humid Conditioning)	-	2500	-
Cl.No.4.6(Flammability)	-	1500	-
4.7(Electrolytic corrosion)	-	4500	-
4.8(Stability to accelerated ageing )	-	4000	-
Cl.No.4.9(Insulation Resistance)	-	2500	-
Cl.No.4 of IS 7809 (Part 1)-1975(Appearance)	-	500	-
Cl.No.5 of IS 7809 (Part 1)-1975(Freedom From Deffects)	-	500	-
3.1(Marking, Cl.9 of IS 7809 (Part 1):1975)	-	200	-

15 Aug, 2028

-
-

8497

INDIAN TESTING LABORATORY PRIVATE LIMITED

8171306

IS 3854 (1997)

Switches for domestic and similar purposes - Specification (Second Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8(Marking)	-	250	-
8(Marking)	-	250	-
8.9(Marking)	-	250	-
7(Classification)	-	250	-
10(Protection against Electric Shock)	-	250	-
11.1(Provision for earthing)	-	250	-
12(Terminals)	-	250	-
12.2.2(Connection of conductor)	-	250	-
12.2.3(Mechanical strength of terminals)	-	500	-
12.2.4(Resistance to corrosion)	-	500	-
12.2.5(Undue damage to conductor)	-	500	-
12.2.7(Insertion of conductor)	-	250	-
12.2.9(Locking against accidental loosening)	-	250	-
12.2.11(Distance between screw and conductor)	-	250	-
12.3.2(Screwless terminals)	-	250	-
12.3.3(Connectin of conductor)	-	250	-
12.3.4(Material of terminals)	-	250	-
12.3.5(Clamping)	-	250	-
12.3.7(v) Interconnection of conductors [Cl. 12.3.7])	-	250	-
12.3.11(vi) Electrical & Thermal Stresses [Cl 12.3.11])	-	1000	-
12.3.12(vii) Deflection Stresses [Cl. 12.3.12])	-	1000	-
13.1(a) Insulating lining, barriers and the like [Cl 13.1])	-	500	-
13.2(b) Construction of switch [Cl 13.2])	-	250	-
13.2(i) Installation Test)	-	250	-
13.3(c) Covers,cover plates and actuating members [Cl 13.3])	-	250	-
13.4(d) Ordinary switches [Cl 13.4])	-	250	-
13.5(e) Rotary switches [Cl 13.5])	-	250	-
13.6(f) Screws and other means [Cl 13.6])	-	250	-
13.7(g) Combination of switches or switches and socket outlets [Cl 13.7])	-	250	-
13.8(h) Assessories combined with switches [Cl. 13.8])	-	250	-
13.9(j) Switches other than ordinary switches [Cl. 13.9])	-	250	-
13.1(k) Switches to be installed in a box [Cl. 13.10])	-	250	-
13.11(l) Surface type switches other than ordinary switch [Cl. 13.11])	-	250	-
13.15(q) Requirements for membrane in inlet opening [ Cl. 13.15])	-	250	-
15.1(Resistance to Ageing, to Harmful Ingress of water and to Humidity [Cl. 15]: Resistance to Ageing, [Cl. 15.1])	-	1000	-
15.2(b)Resistance to Harmful ingress of water [Cl. 15.2])	-	1000	-
15.3(c) Resistance to Humidity [Cl. 15.3])	-	1000	-
16.1(Insulation resistance [Cl. 16.1])	-	1000	-
17(Temperature- rise [Cl. 17])	-	1000	-
16.2( Electric Strength [Cl. 16.2])	-	1000	-
18(Marking and breaking Capacity[Cl. 18])	-	1000	-
19(Normal Operation [Cl. 19] a) General & Operation)	-	1000	-
14.3(d)Test for arcing and sparking [Cl 14.3])	-	500	-
21(Resistance to Heat [Cl.21])	-	750	-
22(Screw, Current Carrying Part And Connection [Cl.22])	-	500	-
22.1(i) Screw & Nuts [Cl.22.1])	-	500	-
22.4(ii) Screw & rivets [Cl . 22.4])	-	500	-
22.3(iii) Electrical Connections [Cl.22.3])	-	500	-
23.2(Creepage distances, clearances and distance through sealing compound [Cl.23])	-	750	-
24.1.1(Resistance to Abnormal Heat & Fire [Cl.24.1] [Glow Wire Test] [Cl.24.1.1])	-	1500	-
24.2(Resistance to tracking [For Switch other than ordinary] [Cl.24.2])	-	1500	-
25 of IS 3854 : 1997(Resistance to rusting)	-	1000	-
11.3(Provision for earthing)	-	1000	-
16.3(Flash test)	-	750	-
20.8(Mechanical Strength Test)	-	500	-
20.7(Mechanical Strength Test)	-	500	-
22.2(Measurement and manual test)	-	250	-
22.6(Inspection and chemical analysis)	-	250	-
16.3(Insulation resistance and electric strength )	-	750	-
13.12, 13.13, 13.14(m) Inlet opening [Cl. 13.12.13.13 & 13.14])	-	750	-
14(Mechanism [Cl. 14])	-	750	-
12.2.6(Terminals, Qualitative)	-	250	-
12.3.1(Terminals, Qualitative)	-	250	-
12.3.6(Terminals, Qualitative)	-	250	-
12.3.10(Terminals, Qualitative)	-	250	-
13.12(Qualitative)	-	250	-

15 Aug, 2028

-
Upto 16 Amp. Excluding AX type

8498

INDIAN TESTING LABORATORY PRIVATE LIMITED

8171306

IS 1293 (2019)

Plugs and socket - Outlets of rated Voltage up to and including 250 Volts and rated current up to and including 16 amperes - Specification (Third Revision)

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Ratings)	-	100	-
7.1.1(Accessories Classification)	-	100	-
7.1.2(Accessories Classification)	-	100	-
7.1.3(Accessories Classification)	-	100	-
7.1.4(Accessories Classification)	-	100	-
7.1.5(Accessories Classification)	-	100	-
7.2.1(Socket-Outlets Classification)	-	100	-
7.2.2(Socket-Outlets Classification)	-	100	-
7.2.3(Socket-Outlets Classification)	-	100	-
7.2.4(Socket-Outlets Classification)	-	100	-
7.3(Plug Classification)	-	100	-
8.1(MARKING)	-	500	-
8.8(MARKING)	-	500	-
8.9(MARKING)	-	500	-
9.1(CHECKING OF DIMENSIONS)	-	500	-
9.2(CHECKING OF DIMENSIONS)	-	500	-
10.1(PROTECTION AGAINST ELECTRIC SHOCK)	-	500	-
10.1(PROTECTION AGAINST ELECTRIC SHOCK)	-	500	-
10.3(PROTECTION AGAINST ELECTRIC SHOCK)	-	500	-
10.4(PROTECTION AGAINST ELECTRIC SHOCK)	-	500	-
10.5(PROTECTION AGAINST ELECTRIC SHOCK)	-	500	-
10.6(PROTECTION AGAINST ELECTRIC SHOCK)	-	500	-
10.7(PROTECTION AGAINST ELECTRIC SHOCK)	-	500	-
11.1(PROVISIONS FOR EARTHING)	-	500	-
11.2(PROVISIONS FOR EARTHING)	-	500	-
11.3(PROVISIONS FOR EARTHING)	-	500	-
11.4(PROVISIONS FOR EARTHING)	-	500	-
11.5(PROVISIONS FOR EARTHING)	-	500	-
11.6(PROVISIONS FOR EARTHING)	-	500	-
12.1.1(TERMINALS)	-	250	-
12.1.2(TERMINALS)	-	250	-
12.2.1(TERMINALS)	-	250	-
12.2.2(TERMINALS)	-	250	-
12.2.3(TERMINALS)	-	250	-
12.2.4(TERMINALS)	-	250	-
12.2.5(TERMINALS)	-	250	-
12.2.6(TERMINALS)	-	250	-
12.2.7(TERMINALS)	-	250	-
12.2.8(TERMINALS)	-	250	-
12.2.9(TERMINALS)	-	250	-
12.3.1(TERMINALS)	-	250	-
12.3.11(TERMINALS)	-	250	-
12.3.2(TERMINALS)	-	250	-
12.3.3(TERMINALS)	-	250	-
12.3.4(TERMINALS)	-	250	-
12.3.5(TERMINALS)	-	250	-
12.3.6(TERMINALS)	-	250	-
12.3.7(TERMINALS)	-	250	-
12.3.8(TERMINALS)	-	250	-
12.3.9(TERMINALS)	-	250	-
12.3.10(TERMINALS)	-	250	-
12.3.12(TERMINALS)	-	250	-
13.1(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	100	-
13.2(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	100	-
13.3(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	100	-
13.4(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	100	-
13.5(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	100	-
13.6(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	100	-
13.7(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	100	-
13.8(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	100	-
13.9(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	100	-
13.1(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	100	-
13.11(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	100	-
13.12(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	100	-
13.13(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	100	-
13.14(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	100	-
13.15(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	100	-
13.16(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	100	-
13.17(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	100	-
13.18(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	100	-
13.19(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	100	-
13.2(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	100	-
13.21(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	100	-
13.22(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	100	-
13.23(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	100	-
14.1(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.2(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.3(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.4(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.5(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.6(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.7(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.8(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.9(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.1(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.11(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.13(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.14(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.15(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.16(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.17(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.18(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.19(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.2(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.21(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.22(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.23.1(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.23.2(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.24(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.25(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
14.26(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	100	-
15(INTERLOCKED SOCKET-OUTLETS)	-	100	-
16.1(RESISTANCE TO AGEING,)	-	500	-
16.2(RESISTANCE TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	1000	-
16.3(Resistance to Humidity)	-	1000	-
17.1(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	1000	-
17.2(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	1000	-
17.3(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	1000	-
18(OPERATION OF EARTHING CONTACTS)	-	500	-
19(TEMPERATURE RISE)	-	1000	-
20(BREAKING CAPACITY)	-	1500	-
21(NORMAL OPERATION)	-	1500	-
22.1(Verification of the Maximum Withdrawal Force)	-	500	-
22.2(Verification of Minimum Withdrawal Force)	-	500	-
23.1(FLEXIBLE CABLES AND THEIR CONNECTION)	-	500	-
23.1(FLEXIBLE CABLES AND THEIR CONNECTION)	-	500	-
23.3(FLEXIBLE CABLES AND THEIR CONNECTION)	-	500	-
23.4(FLEXIBLE CABLES AND THEIR CONNECTION)	-	500	-
24.1(MECHANICAL STRENGTH For all kinds of fixed socket-outlets )	-	500	-
24.1(MECHANICAL STRENGTH For portable multiple and combined socket outlets with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	500	-
24.1(MECHANICAL STRENGTH For surface mounting boxes)	-	500	-
24.2(MECHANICAL STRENGTH For portable single socket-outlets: 1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	500	-
24.2(MECHANICAL STRENGTH For plug 1) with enclosures, covers and bodies other than elastomeric or thermoplastic material)	-	500	-
24.5(MECHANICAL STRENGTH For portable single socket-outlets: 1) with enclosures, covers or bodies of thermoplastic or elastomeric material)	-	500	-
24.5(MECHANICAL STRENGTH For portable multiple and combined socket outlets: 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	500	-
24.5(MECHANICAL STRENGTH For Plug 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	500	-
24.6(MECHANICAL STRENGTH For screwed glands of accessories having an IP code higher than IP20)	-	500	-
24.7(MECHANICAL STRENGTH For plug pins provided with insulating sleeves)	-	500	-
24.8(MECHANICAL STRENGTH For shuttered socket-outlets)	-	500	-
24.9(MECHANICAL STRENGTH For portable multiple and combined socket outlets (1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	500	-
24.1(MECHANICAL STRENGTH For Plug (1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	500	-
24.1(MECHANICAL STRENGTH For Plug (1) with enclosures, covers or bodies of thermoplastic or elastomeric material)	-	500	-
24.11(MECHANICAL STRENGTH For portable socket-outlets having means for suspension on a wall)	-	500	-
24.12(MECHANICAL STRENGTH For portable socket-outlets having means for suspension on a wall)	-	500	-
24.13(MECHANICAL STRENGTH For portable socket-outlets having means for suspension on a wall)	-	500	-
24.14.1(MECHANICAL STRENGTH For fixed socket-outlets)	-	500	-
24.14.2(MECHANICAL STRENGTH For fixed socket-outlets)	-	500	-
24.14.3(MECHANICAL STRENGTH For plugs and portable socket-outlets)	-	500	-
24.15(MECHANICAL STRENGTH )	-	1000	-
24.16(MECHANICAL STRENGTH )	-	1000	-
24.16(MECHANICAL STRENGTH For shroud of portable socket-outlets)	-	1000	-
25.1(RESISTANCE TO HEAT Accessories and surface mounting boxes)	-	1000	-
25.2(RESISTANCE TO HEAT Parts of insulating material necessary to retain current-carrying parts of the earthing circuit in position, as well as parts of the front surface zone of thermoplastic material)	-	1000	-
25.3(RESISTANCE TO HEAT Parts of insulating material not necessary to retain current-carrying parts and parts of the earthing circuit in position, even though they are in contact with them)	-	1000	-
25.4(RESISTANCE TO HEAT )	-	1000	-
26.1(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	500	-
26.2(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	500	-
26.3(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	500	-
26.4(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	500	-
26.5(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	500	-
26.6(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	500	-
26.7(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	500	-
27.1(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	500	-
27.2(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	1000	-
27.3(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	1000	-
28.1.1(Resistance to Abnormal Heat and to Fire Glow-Wire Test)	-	1000	-
28.1.2(Resistance to Abnormal Heat and to Fire for plugs with pins provided with insulating sleeves)	-	1000	-
28.2(Resistance to Tracking For accessories other than IP code higher than IPX0 parts of insulating material retaining live parts in position)	-	1000	-
29(RESISTANCE TO RUSTING)	-	1000	-
30.1(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Pressure Test at High Temperature)	-	1000	-
30.2(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Static Damp Heat Test)	-	1000	-
30.3(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Tests at Low Temperature)	-	1000	-
30.4(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Impact Test at Low Temperature)	-	1000	-

15 Aug, 2028

-
-

8499

Alpha Test House Services LLP

9138706

IS 5522 (2014)

Stainless steel sheets and strips for utensils - Specification (Third Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 7.1 & 7.2 Table 1(Carbon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl. 7.1 & 7.2 Table 1(Silicon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl. 7.1 & 7.2 Table 1(Manganese -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl. 7.1 & 7.2 Table 1(Nickel -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl. 7.1 & 7.2 Table 1(Chromium -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl. 7.1 & 7.2 Table 1(Sulphur -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl. 7.1 & 7.2 Table 1(Phosphorus -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl. 7.1 & 7.2 Table 1(Nitrogen -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
8.2, Table 3(Tensile Test-1608:Part 1)	-	1000	-
8.2, Table 3(Proof Stress, N/mm2)	-	1000	-
8.2, Table 3(Elongation, %)	-	500	-
8.3(Hardness , max-IS 1500 or IS 1501 (Part 1) or IS 1586)	-	1000	-
8.4(Bend Test)	-	200	-
8.5(Erichsen Cupping Test)	-	1800	-
10.1(Thickness, mm)	-	300	-
10.2(width, mm)	-	300	-
10.3(Length, mm)	-	200	-
10.4(Flatness,mm)	-	200	-
10.5(Camber, mm)	-	1000	-
11(Surface Finish)	-	75	-
Cl . 6 .0(Freedom from defect)	-	25	-
Cl. 7.1 & 7.2 Table 1(Carbon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl. 7.1 & 7.2 Table 1(Silicon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl. 7.1 & 7.2 Table 1(Manganese -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl. 7.1 & 7.2 Table 1(Nickel -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl. 7.1 & 7.2 Table 1(Chromium -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl. 7.1 & 7.2 Table 1(Sulphur -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl. 7.1 & 7.2 Table 1(Phosphorus -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl. 7.1 & 7.2 Table 1(Nitrogen -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	-
8.2, Table 3(Tensile Test-1608:Part 1)	-	1000	-
8.2, Table 3(Proof Stress, N/mm2)	-	1000	-
8.2, Table 3(Elongation, %)	-	500	-
8.3(Hardness , max-IS 1500 or IS 1501 (Part 1) or IS 1586)	-	1000	-
8.4(Bend Test)	-	200	-
8.5(Erichsen Cupping Test)	-	1800	-
10.1(Thickness, mm)	-	300	-
10.2(width, mm)	-	300	-
10.3(Length, mm)	-	200	-
10.4(Flatness,mm)	-	200	-
10.5(Camber, mm)	-	1000	-
11(Surface Finish)	-	75	-
Cl . 6 .0(Freedom from defect)	-	25	-

31 Dec, 2026

-
Included w.e.f. 07.11.2023

8500

INDIAN TESTING LABORATORY PRIVATE LIMITED

8171306

IS 15778 (2007)

Chlorinated polyvinyl chloride (Cpvc) pipes for potable hot and cold water distribution supplies - Specification

Class I, II, III

95000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5 Table 1(Classification of pipes)	-	250	-
6.2.1 Annex B(Chloride Content of Resin)	-	2500	-
6.3(Compound Properties)	-	10000	-
6.3.1 Annex B(Chloride content)	-	2500	-
6.3.2 Annex C(Verification of the Malfunction Temperature, Tmal: )	-	5000	-
7.1 IS 12235 (Part 1) Table 2(Dimension of Pipes: Mean outside Diameter)	-	100	-
7.1,7.1.1 IS 12235 (Part 1) Table 2(Outside Diameter at any point)	-	1000	-
7.1.2 IS 12235 (Part 1) Table 2(Wall Thickness )	-	1000	-
7.1.3 (Effective length)	-	1000	-
8(Pipe Ends)	-	1000	-
9.1(Visual Appearance)	-	500	-
9.2 IS 12235 (Part 3)(Opacity)	-	1500	-
Cl. 9.3,IS 4985 Cl. 10.3(Lead (first extraction))	-	1500	-
Cl. 9.3,IS 4985 Cl. 10.3(Lead (third extraction))	-	1500	-
Cl. 9.3,IS 4985 Cl. 10.3(Dialkyl tin C4 and higher homologues measured as tin (third extraction))	-	1500	-
Cl. 9.3,IS 4985 Cl. 10.3(Cadmium (for all three extracts) )	-	1500	-
Cl. 9.3,IS 4985 Cl. 10.3(Mercury (for all three extracts) )	-	1500	-
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances such as 'di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate' (third extraction) )	-	1500	-
9.4 IS 12235(Part 5/Sec 1 and Sec 2)(Reversion Test : When tested by the method prescribed in IS 12235(Part 5/Sec 1 and Sec 2), a length of pipe 200 + 20 mm long shall not alter in length by more than 5 percent.)	-	1500	-
9.5 IS 12235(Part 2)(Vicat Softening Temperature: When tested by the method prescribed in IS 12235(Part 2), the Vicat softening temperature of the specimen shall not be less than 110°C.)	-	1500	-
9.6 IS 12235(Part 14)(Density)	-	1500	-
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	30000	-
10.2 Table 3 IS 12235 (Part 8/Sec 1)(Thermal Stability by Hydrostatic Pressure Testing)	-	45000	-
10.3 IS 4985 Table 4(Resistance to External Blow at O°C: When tested by the method prescribed in IS 4985, with classified striker mass and drop height as given in Table 4, the pipe shall have a true impact rate of not more than 10 percent.)	-	2500	-
10.4 IS 12235(Part 19)(Flattening Test)	-	1500	-
10.5 IS 12235(Part 13)(Tensile Strength : When tested by the method prescribed in IS 12235(Part 13), the tensile strength at yield shall not be less than 50 MPaat 27±2°C. )	-	2500	-
6.3.3(Density)	-	1000	-

15 Aug, 2028

-
-

8501

Alpha Test House Services LLP

9138706

IS 1079 (2017)

Hot rolled carbon steel sheet, plate and strip - Specification (Seventh Revision)

8100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Carbon %)	-	100	15% DISCOUNT TO BIS
6.1(Manganese %)	-	100	15% DISCOUNT TO BIS
6.1(Phosphorus %)	-	100	15% DISCOUNT TO BIS
6.1(Sulphur %)	-	100	15% DISCOUNT TO BIS
6.1(Silicon %)	-	100	15% DISCOUNT TO BIS
6.1( Copper %)	-	100	15% DISCOUNT TO BIS
6.1( Aluminium %)	-	100	15% DISCOUNT TO BIS
6.1( Nb)	-	100	15% DISCOUNT TO BIS
6.1(V)	-	100	15% DISCOUNT TO BIS
6.1( Ti)	-	100	15% DISCOUNT TO BIS
6.1(Cr)	-	100	15% DISCOUNT TO BIS
6.1(Mo)	-	100	15% DISCOUNT TO BIS
6.1(Ni)	-	100	15% DISCOUNT TO BIS
6.1( Nitrogen%)	-	1300	15% DISCOUNT TO BIS
Cl.13(Out of square)	-	300	15% DISCOUNT TO BIS
Cl.13(Flatness)	-	200	15% DISCOUNT TO BIS
Cl.13(Camber)	-	200	15% DISCOUNT TO BIS
Cl.13(Width)	-	200	15% DISCOUNT TO BIS
Cl.13(Thickness)	-	200	15% DISCOUNT TO BIS
Cl. 8.3, Cl. 8.3.1 Table 5 and Table 6(Percentage Elongation After Fracture at 5.65√A Gauge length)	-	500	15% DISCOUNT TO BIS
Cl. 8.3, Cl. 8.3.1 Table 5 and Table 6(Percentage Elongation After Fracture at 80 mm Gauge length)	-	500	15% DISCOUNT TO BIS
Cl. 8.3, Cl. 8.3.1 Table 5 and Table 6(Percentage Elongation After Fracture at 50 mm Gauge length)	-	500	15% DISCOUNT TO BIS
Cl. 8.3, Cl. 8.3.1 Table 6(0.2% Proof Stress/Yield Stress)	-	500	15% DISCOUNT TO BIS
Cl 13(Length, Width & Thickness)	-	500	15% DISCOUNT TO BIS
Cl 12(Workmanship)	-	200	15% DISCOUNT TO BIS
Cl 10(Die Press)	-	400	15% DISCOUNT TO BIS
9(Bend test)	-	500	15% DISCOUNT TO BIS
14(Calculation of weight)	-	200	15% DISCOUNT TO BIS
8, Table 5 & 6(Tensile Strength)	-	1000	15% DISCOUNT TO BIS
8, Table 5 & 6(Yield Strength)	-	1000	15% DISCOUNT TO BIS
8, Table 5 & 6(Elongation)	-	500	15% DISCOUNT TO BIS
Clause 10(Cuppping Test)	-	400	15% DISCOUNT TO BIS
Clause 12(Freedom from defect)	-	200	15% DISCOUNT TO BIS
Clause 7, Table 3, Note 1(Boron)	-	100	15% DISCOUNT TO BIS
Clause 7, Table 3, Note 1(B+Ti+Nb+V)	-	100	15% DISCOUNT TO BIS
6.1(Carbon %)	-	100	15% DISCOUNT TO BIS
6.1(Manganese %)	-	100	15% DISCOUNT TO BIS
6.1(Phosphorus %)	-	100	15% DISCOUNT TO BIS
6.1(Sulphur %)	-	100	15% DISCOUNT TO BIS
6.1(Silicon %)	-	100	15% DISCOUNT TO BIS
6.1( Copper %)	-	100	15% DISCOUNT TO BIS
6.1( Aluminium %)	-	100	15% DISCOUNT TO BIS
6.1( Nb)	-	100	15% DISCOUNT TO BIS
6.1(V)	-	100	15% DISCOUNT TO BIS
6.1( Ti)	-	100	15% DISCOUNT TO BIS
6.1(Cr)	-	100	15% DISCOUNT TO BIS
6.1(Mo)	-	100	15% DISCOUNT TO BIS
6.1(Ni)	-	100	15% DISCOUNT TO BIS
6.1( Nitrogen%)	-	1300	15% DISCOUNT TO BIS
Cl.13(Out of square)	-	300	15% DISCOUNT TO BIS
Cl.13(Flatness)	-	200	15% DISCOUNT TO BIS
Cl.13(Camber)	-	200	15% DISCOUNT TO BIS
Cl.13(Width)	-	200	15% DISCOUNT TO BIS
Cl.13(Thickness)	-	200	15% DISCOUNT TO BIS
Cl. 8.3, Cl. 8.3.1 Table 5 and Table 6(Percentage Elongation After Fracture at 5.65√A Gauge length)	-	500	15% DISCOUNT TO BIS
Cl. 8.3, Cl. 8.3.1 Table 5 and Table 6(Percentage Elongation After Fracture at 80 mm Gauge length)	-	500	15% DISCOUNT TO BIS
Cl. 8.3, Cl. 8.3.1 Table 5 and Table 6(Percentage Elongation After Fracture at 50 mm Gauge length)	-	500	15% DISCOUNT TO BIS
Cl. 8.3, Cl. 8.3.1 Table 6(0.2% Proof Stress/Yield Stress)	-	500	15% DISCOUNT TO BIS
Cl 13(Length, Width & Thickness)	-	500	15% DISCOUNT TO BIS
Cl 12(Workmanship)	-	200	15% DISCOUNT TO BIS
Cl 10(Die Press)	-	400	15% DISCOUNT TO BIS
9(Bend test)	-	500	15% DISCOUNT TO BIS
14(Calculation of weight)	-	200	15% DISCOUNT TO BIS
8, Table 5 & 6(Tensile Strength)	-	1000	15% DISCOUNT TO BIS
8, Table 5 & 6(Yield Strength)	-	1000	15% DISCOUNT TO BIS
8, Table 5 & 6(Elongation)	-	500	15% DISCOUNT TO BIS
Clause 10(Cuppping Test)	-	400	15% DISCOUNT TO BIS
Clause 12(Freedom from defect)	-	200	15% DISCOUNT TO BIS
Clause 7, Table 3, Note 1(Boron)	-	100	15% DISCOUNT TO BIS
Clause 7, Table 3, Note 1(B+Ti+Nb+V)	-	100	15% DISCOUNT TO BIS
6.1(Carbon %)	-	100	15% DISCOUNT TO BIS
6.1(Manganese %)	-	100	15% DISCOUNT TO BIS
6.1(Phosphorus %)	-	100	15% DISCOUNT TO BIS
6.1(Sulphur %)	-	100	15% DISCOUNT TO BIS
6.1(Silicon %)	-	100	15% DISCOUNT TO BIS
6.1( Copper %)	-	100	15% DISCOUNT TO BIS
6.1( Aluminium %)	-	100	15% DISCOUNT TO BIS
6.1( Nb)	-	100	15% DISCOUNT TO BIS
6.1(V)	-	100	15% DISCOUNT TO BIS
6.1( Ti)	-	100	15% DISCOUNT TO BIS
6.1(Cr)	-	100	15% DISCOUNT TO BIS
6.1(Mo)	-	100	15% DISCOUNT TO BIS
6.1(Ni)	-	100	15% DISCOUNT TO BIS
6.1( Nitrogen%)	-	1300	15% DISCOUNT TO BIS
Cl.13(Out of square)	-	300	15% DISCOUNT TO BIS
Cl.13(Flatness)	-	200	15% DISCOUNT TO BIS
Cl.13(Camber)	-	200	15% DISCOUNT TO BIS
Cl.13(Width)	-	200	15% DISCOUNT TO BIS
Cl.13(Thickness)	-	200	15% DISCOUNT TO BIS
Cl. 8.3, Cl. 8.3.1 Table 5 and Table 6(Percentage Elongation After Fracture at 5.65√A Gauge length)	-	500	15% DISCOUNT TO BIS
Cl. 8.3, Cl. 8.3.1 Table 5 and Table 6(Percentage Elongation After Fracture at 80 mm Gauge length)	-	500	15% DISCOUNT TO BIS
Cl. 8.3, Cl. 8.3.1 Table 5 and Table 6(Percentage Elongation After Fracture at 50 mm Gauge length)	-	500	15% DISCOUNT TO BIS
Cl. 8.3, Cl. 8.3.1 Table 6(0.2% Proof Stress/Yield Stress)	-	500	15% DISCOUNT TO BIS
Cl 13(Length, Width & Thickness)	-	500	15% DISCOUNT TO BIS
Cl 12(Workmanship)	-	200	15% DISCOUNT TO BIS
Cl 10(Die Press)	-	400	15% DISCOUNT TO BIS
9(Bend test)	-	500	15% DISCOUNT TO BIS
14(Calculation of weight)	-	200	15% DISCOUNT TO BIS
8, Table 5 & 6(Tensile Strength)	-	1000	15% DISCOUNT TO BIS
8, Table 5 & 6(Yield Strength)	-	1000	15% DISCOUNT TO BIS
8, Table 5 & 6(Elongation)	-	500	15% DISCOUNT TO BIS
Clause 10(Cuppping Test)	-	400	15% DISCOUNT TO BIS
Clause 12(Freedom from defect)	-	200	15% DISCOUNT TO BIS
Clause 7, Table 3, Note 1(Boron)	-	100	15% DISCOUNT TO BIS
Clause 7, Table 3, Note 1(B+Ti+Nb+V)	-	100	15% DISCOUNT TO BIS

31 Dec, 2026

-
-

8502

INDIAN TESTING LABORATORY PRIVATE LIMITED

8171306

IS 12786 (1989)

Irrigation equipment - Polyethylene pipes for irrigation laterals - Specification

CLASS I, II & III

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.b(Potyethylene - anti-oxidant)	-	2500	-
4.1.c.i (Density)	-	1000	-
4.1.c.ii (Toluene extract - Annex A)	-	1500	-
4.1.c.iii (Volatile matter - Annex B )	-	1500	-
4.1.c & 4.2.a (Carbon Black content - IS 2530 : 1963)	-	1500	-
4.2.b (The dispersion of Carbon Black content shall be satisfactory - IS 2530 : 1963)	-	1000	-
4.3(Addition of not more than 10 percent of the manufactures own rework material produced during the manufacture and works testing of pipe complying with this standard is permitted. No other rework material shall be used)	-	500	-
7.3(Tensile Test)	-	1500	-
7.3(Elongation at Break)	-	1000	-
7.4(SusceptibiIity to Environmental Stress Cracking)	-	2500	-
5 and Table 1(DIMENSIONS OF PIPES - outside diameters)	-	500	-
5 and Table 1(DIMENSIONS OF PIPES - wall thickness shall)	-	500	-
7.2(Reversion Test)	-	1500	-
Cl. 7.1 Table -2(Acceptance Test for 1 hrs @ 27 c & 6.9 Mpa)	-	2500	-
6.1(Visual Appearance)	-	500	-
3.1(Class of Pipe)	-	500	-
9.0 (9.1)(Minimum Internal Diameter of Coil)	-	500	-
8.0 (8.1) (Supply of pipes )	-	250	-
7.1 Table-2 (Hydraulic Characteristics a)Quality Test for 100 hours at 70°C & 2.5.MPa induced stress. )	-	5000	-
4.1.c(iv)(MATERIAL)	-	250	-
4.1d(MATERIAL)	-	250	-
4.2a(Carbon Black Content)	-	750	-

15 Aug, 2028

-
-

8503

INDIAN TESTING LABORATORY PRIVATE LIMITED

8171306

IS 14885 (2001)

Polyethylene pipes for the supply of gaseous fuels - Specification

SDR 17.6,13.6,11.0,9 GROUP I-III PE 80&PE 100

105000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.4(Colour)	-	250	-
Table-2, 5.1(Conventional Density, IS 7328:1992)	-	1500	-
Table-2, 5.1(Melt Flow Rate, IS 2530:1963)	-	2500	-
Table-2, 5.1(Thermal Staibility, Annex-D)	-	7500	-
Table-2, 5.1(Resistance to gas constituents, Cl 5.5)	-	10000	-
Table-2, 5.1(Pigment dispersion, Annex-E)	-	1500	-
5.2(Anti Oxidant: Cl. 17 of IS 2530)	-	5000	-
5.3(U.V.Stabilizer)	-	10000	-
6.1, Table-3(Ovality Pipe, Cl 6.3.2)	-	500	-
6.1, Table-3(Nominal Outside Diameter of Pipes , Cl 6.3.1)	-	500	-
6.2.1, Table-4(Minimum Wall Thickness, Cl.6.3, Cl.6.2.1.1, Table-5)	-	500	-
6.4(Length of pipe)	-	500	-
7, Table-6(Maximmn Out of Square of Each Pipe End)	-	500	-
8.1(Hydraulic Charactristics, Annex-A)	-	45000	-
8.2(Reversion Test. Annex-C)	-	1500	-
8.3(Density, Annex A of IS 7328)	-	1500	-
8.4(Melt Flow Rate (MFR), IS 2530)	-	1500	-
8.5(Thermal Stability to Oxidation, Annex-D)	-	5000	-
8.7(Tensile yield strength, Annex-J)	-	2500	-
8.7(Elongation at break, Annex-J)	-	1500	-
8.8(Resistance to Weathering, Annex-F)	-	10000	-
8.9(Squeeze off, Annex-G)	-	10000	-
8.6 & Table-2(Volatile Content: Annex-H of IS 14885)	-	5000	-
10(Marking)	-	250	-

15 Aug, 2028

-
-

8504

Alpha Test House Services LLP

9138706

IS 513 : Part 1 (2016)

Cold reduced carbon steel sheet and strip: Part 1 cold forming and drawing purpose (Sixth Revision)

7500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.0(ALUMINIUM)	-	100	15% DISCOUNT TO BIS
7.0(MICRO ALLOYS)	-	100	15% DISCOUNT TO BIS
7.0(NITROGEN)	-	200	15% DISCOUNT TO BIS
7.0(SILICON)	-	100	15% DISCOUNT TO BIS
7.0(MANGANESE)	-	100	15% DISCOUNT TO BIS
7.0(PHOSPHORUS)	-	100	15% DISCOUNT TO BIS
7.0(SULPHUR)	-	100	15% DISCOUNT TO BIS
7.0(CARBON)	-	200	15% DISCOUNT TO BIS
Cl. 11(Out of square)	-	100	15% DISCOUNT TO BIS
Cl. 11(Flatness)	-	100	15% DISCOUNT TO BIS
Cl. 11(Camber)	-	100	15% DISCOUNT TO BIS
Cl. 11(Width)	-	100	15% DISCOUNT TO BIS
Cl. 11(Thickness)	-	100	15% DISCOUNT TO BIS
Cl. 8.7(Bake Hardening Index)	-	150	15% DISCOUNT TO BIS
Cl. 8.6 Table 5A, 5B & 5C(Tensile Strain Hardening Component (n-Value))	-	150	15% DISCOUNT TO BIS
Cl. 8.5 Table 5A, 5B & 5C(Plastic Strain Ratio (r bar/r-90))	-	150	15% DISCOUNT TO BIS
Cl. 8.4(Bend Test)	-	940	15% DISCOUNT TO BIS
Cl. 8.3 Table 6(Hardness Test ( Only for CR0 & CR1))	-	500	15% DISCOUNT TO BIS
Cl. 8.2(Cupping Test(Only for sheet and coils CR2, CR3, CR4(having thickness 0.5 mm-2.0 mm))	-	1000	15% DISCOUNT TO BIS
Cl. 8.1 & Table 5A, 5B & 5C(Elongation at 80 mm gauge length)	-	700	15% DISCOUNT TO BIS
Cl. 8.1 & Table 5A, 5B & 5C(Elongation at 50 mm gauge length)	-	700	15% DISCOUNT TO BIS
Cl. 8.1 & Table 5A, 5B & 5C(Yield Stress)	-	700	15% DISCOUNT TO BIS
Cl. 9 Table 8(Surface roughness)	-	500	15% DISCOUNT TO BIS
Cl 10(Workmanship)	-	250	15% DISCOUNT TO BIS
Cl 9.6(Workmanship)	-	250	15% DISCOUNT TO BIS
Cl. 11(Out of square)	-	100	15% DISCOUNT TO BIS
Cl. 11(Flatness)	-	100	15% DISCOUNT TO BIS
Cl. 11(Camber)	-	100	15% DISCOUNT TO BIS
Cl. 11(Width)	-	100	15% DISCOUNT TO BIS
Cl. 11(Thickness)	-	100	15% DISCOUNT TO BIS
Cl. 8.7(Bake Hardening Index)	-	150	15% DISCOUNT TO BIS
Cl. 8.6 Table 5A, 5B & 5C(Tensile Strain Hardening Component (n-Value))	-	150	15% DISCOUNT TO BIS
Cl. 8.5 Table 5A, 5B & 5C(Plastic Strain Ratio (r bar/r-90))	-	150	15% DISCOUNT TO BIS
Cl. 8.4(Bend Test)	-	940	15% DISCOUNT TO BIS
Cl. 8.3 Table 6(Hardness Test ( Only for CR0 & CR1))	-	500	15% DISCOUNT TO BIS
Cl. 8.2(Cupping Test(Only for sheet and coils CR2, CR3, CR4(having thickness 0.5 mm-2.0 mm))	-	1000	15% DISCOUNT TO BIS
Cl. 8.1 & Table 5A, 5B & 5C(Elongation at 80 mm gauge length)	-	700	15% DISCOUNT TO BIS
Cl. 8.1 & Table 5A, 5B & 5C(Elongation at 50 mm gauge length)	-	700	15% DISCOUNT TO BIS
Cl. 8.1 & Table 5A, 5B & 5C(Yield Stress)	-	700	15% DISCOUNT TO BIS
Cl. 9 Table 8(Surface roughness)	-	500	15% DISCOUNT TO BIS
Cl 10(Workmanship)	-	250	15% DISCOUNT TO BIS
Cl 9.6(Workmanship)	-	250	15% DISCOUNT TO BIS

31 Dec, 2026

-
Included w.e.f. 07.11.2023

8505

BIS, Eastern Regional Laboratory (ERL)

None

IS 4431 (1978)

Specification for carbon and carbon manganese free cutting steels (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 6 (Carbon)	-
Cl. 6 (Sulphur)	-
Cl. 6 (Phosphorus)	-
Cl. 6 (Manganese)	-
Cl. 6 (Silicon)	-
Cl. 6 (Nickel)	-
Cl. 6 (Copper)	-
Cl. 6 (Molybdenum)	-
Cl. 6 (Chromium)	-
5 (Freedom from defectes)	-
8.1 (Tensile strength)	-
8.1 (Elongation)	-
8.1 (Izod Impact)	-
9 (Diameter)	-
9 (Out of Round)	-
9 (Straightness)	-

-
Excluding Vanadium

8506

INDIAN TESTING LABORATORY PRIVATE LIMITED

8171306

IS 12818 (2010)

Unplasticized polyvinyl chloride (Pvc - U) screen and casing pipes for bore/tubewells - Specification (Second Revision)

RMS,RDS,PMS,PDS,CS,CM,CD

14500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.6(Vicat Softening Temperature IS 12235 (Part 2).)	-	1500	-
9.5(Tensile Strength IS 12235(Part 13))	-	1500	-
9.4 and Table 14(Resistance to External Blows at 0 ?C IS 12235 (Part 9))	-	1500	-
9.3(Density IS 12235 (Part 14))	-	1000	-
9.2(Internal Diameter)	-	1000	-
9.1( Visual Appearance)	-	500	-
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	1000	-
8.4(Sealing rings - Hardness)	-	750	-
8.1 to 8.3 and Table 11 &12 Fig 3A & 4A(THREADING OF SCREEN ANDCASING PIPES. IS 554.)	-	1500	-
7.5 and Table 10 Fig 2A & 2B(Approximate Free Passage Area, in Percent (Mean Value) for Width of Slot (w))	-	250	-
7.5 and Table 10 Fig 2A & 2B(Minimum number of slots on the circumference of the cross-section.)	-	250	-
7.5 and Table 10 Fig 2A & 2B(Summation of slot lengths over internal circumference of the cross- section.)	-	250	-
7.4 Table 8 & 9 Fig 1(Segmental length, l5)	-	250	-
7.4 Table 8 & 9 Fig 1(Segmental length, l4)	-	250	-
7.4 Table 8 & 9 Fig 1(Segmental length, l3)	-	250	-
7.4 Table 8 & 9 Fig 1(Effective length, l2)	-	250	-
7.3.2(Rib height)	-	250	-
7.3.1(No.of Ribs)	-	250	-
7.2 and Table 5, 6 & 7 Fig 1B(Wall thickness, Max)	-	250	-
7.2 and Table 5, 6 & 7 Fig 1B(Wall thickness, Min)	-	250	-
7.2 and Table 5, 6 & 7 Fig 1B(Mean Outer Diameter over Connection)	-	250	-
7.2 and Table 5, 6 & 7 Fig 1B(Outer Diameter at any point, Max)	-	250	-
7.2 and Table 5, 6 & 7 Fig 1B(Outer Diameter at any point , Min)	-	250	-
7.2 and Table 5, 6 & 7 Fig 1B(Mean Outer Diameter of Pipe , Max)	-	250	-
7.2 and Table 5, 6 & 7 Fig 1B(Mean Outer Diameter of Pipe, Min)	-	250	-
7.2 and Table 5, 6 & 7 Fig 1B(Nominal Diameter)	-	250	-
4.1.2(K-Value as per IS-4669)	-	1500	-
4.1.1 (Ref. 3.4.1. of IS 10151)(Composition - The monomer content (VCM content) in the resin - Annex A ofIS 10151)	-	4000	-
5(COLOUR)	-	250	-
9.7(Effect on Water a) Lead (first extraction) b) Lead (Third extraction) c) Dialkyl Tin C4 & higher homologues measured as Tin (Third extraction) d) Cadmium (All three extracts) e) Mercury (All three extracts) f) Other Toxic Substances )	-	4500	-
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Wall thickness)	-	250	-
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Mean Outer Diameter over Connection)	-	250	-
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Outer Diameter at any point )	-	250	-
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Mean Outer Diameter of Pipe)	-	250	-
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B(Nominal Diameter)	-	250	-
11(Marking)	-	250	-

15 Aug, 2028

-
-

8507

BIS Patna Branch Laboratory (PBL)

None

IS 4985 (2021)

UNPLASTICIZED PVC PIPES FOR POTABLE WATER SUPPLIES SPECIFICATION Fourth Revision

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
10.1 (Colour)	-
10.1 (Surface Finish)	-
10.7 (Sulphated Ash Content)	-
7.2.1.1 Table3 (Angle of taper (Note-1))	-
7.1.1.1 (DIMENSIONS-PIPE-Mean O.D. (Minimum))	-
7.1.1.1 (DIMENSIONS-PIPE-Mean O.D. (Mamimum))	-
7.1.1.1 (DIMENSIONS-PIPE-Mean O.D. Variation)	-
7.1.1.2 (DIMENSIONS-PIPE-O.D. at any Point (Minimum))	-
7.1.1.2 (DIMENSIONS-PIPE-O.D. at any Point (Maximum))	-
7.1.1.2 (DIMENSIONS-PIPE-Ovality (Maximum))	-
7.1.2.1 (DIMENSIONS-PIPE-Thickness(Minimum))	-
7.1.2.1 (DIMENSIONS-PIPE-Thickness(Maximum))	-
7.1.2.1 (DIMENSIONS-PIPE-Average Thickness)	-
7.2.1.1-Table 3 (DIMENSIONS-Socket-Sockets for solvent cement jointing-Minimum Length)	-
7.2.1.1-Table 3 (DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Minimum))	-
7.2.1.1-Table 3 (DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Maximum))	-
7.2.1.2(a)-Table 5 (DIMENSIONS-Sockets for elastomeric sealing ring joints-Minimum depth of engagement)	-
7.2.1.2-Table 4 (DIMENSIONS-Sockets for elastomeric sealing ring joints-Socket inner Diameter)	-
9.1 (PIPE ENDS)	-
10.1 (PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-
10.1.1 (PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-
10.4 (PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test)	-
10.6 (PHYSICAL AND CHEMICAL CHARACTERISTICS- Density)	-
7.1.3 (mean outside diameter, outside diameter at any point, and wall thickness of plumbing pipes)	-
7.1.4 (Length)	-
10.5 (PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature)	-
11.2 (Resistance to External Blows at 0°C)	-
10.2 (PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity)	-

-
All test facilities are available as per the IS except- i. Sealing Ring (Clause 8) ii. Hydrostatic Chracteristics (Clause 11.1) iii. Effect On Water (Clause10.3) iv. Reversion test (Clause10.4)

8508

BIS, Bengaluru Branch Laboratory (BNBL)

None

IS 9873 : Part 3 (2020)

Safety of Toys Part 3 Migration of Certain Elements ( Third Revision )

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 - Table 1 (Antimony (Sb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-
4.1 - Table 1 (Arsenic (As) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-
4.1 - Table 1 (Barium (Ba) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-
4.1 - Table 1 (Cadmium (Cd) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-
4.1 - Table 1 (Chromium (Cr) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-
4.1 - Table 1 (Lead (Pb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-
4.1 - Table 1 (Mercury (Hg) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-
4.1 - Table 1 (Selenium (Se) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010)	-

-
test facility not available for Pthalates

8509

Alpha Test House Services LLP

9138706

IS 10748 (2004)

Hot - Rolled steel strip for welded tubes and pipes - Specification (Second Revision)

13000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8 & Table 3(UTM)	-	2500	15% DISCOUNT TO BIS
Cl 9(Press)	-	1000	15% DISCOUNT TO BIS
Cl 11(Workmanship)	-	200	15% DISCOUNT TO BIS
Cl 12 & 13(Length, Width & Thickness)	-	200	15% DISCOUNT TO BIS
7.1(Carbon %)	-	200	15% DISCOUNT TO BIS
7.1(Manganese %)	-	200	15% DISCOUNT TO BIS
7.1(Phosphorus %)	-	200	15% DISCOUNT TO BIS
7.1(Sulphur %)	-	200	15% DISCOUNT TO BIS
7.1(Silicon %)	-	200	15% DISCOUNT TO BIS
7.1( Copper %)	-	200	15% DISCOUNT TO BIS
7.1( Aluminium %)	-	200	15% DISCOUNT TO BIS
7.1( Nb)	-	200	15% DISCOUNT TO BIS
7.1(V)	-	200	15% DISCOUNT TO BIS
7.1( Ti)	-	200	15% DISCOUNT TO BIS
7.1(Cr)	-	200	15% DISCOUNT TO BIS
7.1(Mo)	-	200	15% DISCOUNT TO BIS
7.1(Ni)	-	200	15% DISCOUNT TO BIS
7.1( Nitrogen%)	-	200	15% DISCOUNT TO BIS
7.1(CE)	-	200	15% DISCOUNT TO BIS
Table 1 ( Clauses 7.1 ,7.2 )(TITANIUM)	-	200	15% DISCOUNT TO BIS
Table 1 ( Clauses 7.1 ,7.2 )(VANADIUM)	-	200	15% DISCOUNT TO BIS
Table 1 ( Clauses 7.1 ,7.2 )(NIOBIUM)	-	200	15% DISCOUNT TO BIS
Table 1 ( Clauses 7.1 ,7.2 )(CARBON EQUIVELENT )	-	200	15% DISCOUNT TO BIS
Table 1 ( Clauses 7.1 ,7.2 )(Molybdenum)	-	200	15% DISCOUNT TO BIS
Table 1 ( Clauses 7.1 ,7.2 )(Chromium)	-	200	15% DISCOUNT TO BIS
Table 1 ( Clauses 7.1 ,7.2 )(Nickel)	-	200	15% DISCOUNT TO BIS
Table 1 ( Clauses 7.1 ,7.2 )( ALUMINIUM)	-	200	15% DISCOUNT TO BIS
Table 1 ( Clauses 7.1 ,7.2 )(SILICON)	-	200	15% DISCOUNT TO BIS
Table 1 ( Clauses 7.1 ,7.2 )(NITROGEN)	-	100	15% DISCOUNT TO BIS
Table 1 ( Clauses 7.1 ,7.2 )(MANGANESE)	-	100	15% DISCOUNT TO BIS
Table 1 ( Clauses 7.1 ,7.2 )(PHOSPHURS)	-	100	15% DISCOUNT TO BIS
Table 1 ( Clauses 7.1 ,7.2 )(SULPHUR)	-	100	15% DISCOUNT TO BIS
Table 1 ( Clauses 7.1 ,7.2 )( CARBON)	-	100	15% DISCOUNT TO BIS
Cl. 14(Weight)	-	100	15% DISCOUNT TO BIS
Cl. 12, 13(Camber)	-	100	15% DISCOUNT TO BIS
Cl. 12, 13(Thickness)	-	100	15% DISCOUNT TO BIS
Cl. 8, Table 3(Elongation)	-	1000	15% DISCOUNT TO BIS
Cl. 8, Table 3(Yield Stress)	-	1000	15% DISCOUNT TO BIS
Cl 8 & Table 3(UTM)	-	2500	15% DISCOUNT TO BIS
Cl 9(Press)	-	1000	15% DISCOUNT TO BIS
Cl 11(Workmanship)	-	200	15% DISCOUNT TO BIS
Cl 12 & 13(Length, Width & Thickness)	-	200	15% DISCOUNT TO BIS
7.1(Carbon %)	-	200	15% DISCOUNT TO BIS
7.1(Manganese %)	-	200	15% DISCOUNT TO BIS
7.1(Phosphorus %)	-	200	15% DISCOUNT TO BIS
7.1(Sulphur %)	-	200	15% DISCOUNT TO BIS
7.1(Silicon %)	-	200	15% DISCOUNT TO BIS
7.1( Copper %)	-	200	15% DISCOUNT TO BIS
7.1( Aluminium %)	-	200	15% DISCOUNT TO BIS
7.1( Nb)	-	200	15% DISCOUNT TO BIS
7.1(V)	-	200	15% DISCOUNT TO BIS
7.1( Ti)	-	200	15% DISCOUNT TO BIS
7.1(Cr)	-	200	15% DISCOUNT TO BIS
7.1(Mo)	-	200	15% DISCOUNT TO BIS
7.1(Ni)	-	200	15% DISCOUNT TO BIS
7.1( Nitrogen%)	-	200	15% DISCOUNT TO BIS
7.1(CE)	-	200	15% DISCOUNT TO BIS
Cl. 14(Weight)	-	100	15% DISCOUNT TO BIS
Cl. 12, 13(Camber)	-	100	15% DISCOUNT TO BIS
Cl. 12, 13(Thickness)	-	100	15% DISCOUNT TO BIS
Cl. 8, Table 3(Elongation)	-	1000	15% DISCOUNT TO BIS
Cl. 8, Table 3(Yield Stress)	-	1000	15% DISCOUNT TO BIS
8.0 (1)(Tensile Strength-IS:1608(P1))	-	1100	15% DISCOUNT TO BIS
15.0 & 15.1(Coil edges - IS:10748)	-	100	15% DISCOUNT TO BIS
15.0 & 15.2(Surface finish - IS:10748)	-	100	15% DISCOUNT TO BIS
15.0 & 15.5(Telescopicity - IS:10748)	-	100	15% DISCOUNT TO BIS
15(Condition of Coil)	-	100	15% DISCOUNT TO BIS

31 Dec, 2026

-
-

8510

Alpha Test House Services LLP

9138706

IS 1239 : Part 2 (2011)

Steel tubes, tubulars and other steel fittings - Specification: Part 2 steel pipe fittings (Fifth Revision)

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1(Chemical Composition - Sulphur - Laddle Analysis IS 228)	-	1000	15% DISCOUNT TO BIS
7.1(Chemical Composition - Phosphorus - Laddle Analysis IS 228)	-	1000	15% DISCOUNT TO BIS
8.1-Table 1( DIMENSIONS OF TUBULARS-Pieces )	-	20	15% DISCOUNT TO BIS
8.2-Table-2( DIMENSIONS OF TUBULARS-Nipples )	-	20	15% DISCOUNT TO BIS
8.2-Table-2( DIMENSIONS OF TUBULARS-Nipples-A )	-	20	15% DISCOUNT TO BIS
8.2-Table-2( DIMENSIONS OF TUBULARS-Nipples-B )	-	20	15% DISCOUNT TO BIS
8.2-Table-2( DIMENSIONS OF TUBULARS-Nipples-C )	-	20	15% DISCOUNT TO BIS
8.3.1-Table 3(DIMENSIONS OF TUBULARS-Longscrews (Connectors))	-	20	15% DISCOUNT TO BIS
8.3.1-Table 3(DIMENSIONS OF TUBULARS-Longscrews (Connectors)-A)	-	20	15% DISCOUNT TO BIS
8.3.1-Table 3(DIMENSIONS OF TUBULARS-Longscrews (Connectors)-B)	-	20	15% DISCOUNT TO BIS
8.3.1-Table 3(DIMENSIONS OF TUBULARS-Longscrews (Connectors)-C)	-	20	15% DISCOUNT TO BIS
8.3.2(DIMENSIONS OF TUBULARS-Longscrews (Connectors))	-	20	15% DISCOUNT TO BIS
8.3.2(DIMENSIONS OF TUBULARS-Longscrews (Connectors)-The face of the back nut angle)	-	20	15% DISCOUNT TO BIS
8.4.1 -Table 4(Bends and springs)	-	20	15% DISCOUNT TO BIS
8.4.1 -Table 4(Bends and springs-A)	-	20	15% DISCOUNT TO BIS
8.4.1 -Table 4(Bends and springs-B)	-	20	15% DISCOUNT TO BIS
8.4.1 -Table 4(Bends and springs-R)	-	20	15% DISCOUNT TO BIS
8.4.1 -Table 4(Bends and springs-C)	-	20	15% DISCOUNT TO BIS
8.4.1 -Table 4(Bends and springs-D)	-	20	15% DISCOUNT TO BIS
8.4.1 -Table 4(Bends and springs-E)	-	20	15% DISCOUNT TO BIS
8.5-Table 5( Return Bends)	-	20	15% DISCOUNT TO BIS
8.5-Table 5( Return Bends-A)	-	20	15% DISCOUNT TO BIS
8.5-Table 5( Return Bends-B)	-	20	15% DISCOUNT TO BIS
8.6 -Table 6(Sockets)	-	20	15% DISCOUNT TO BIS
8.6 -Table 6(Sockets-A)	-	20	15% DISCOUNT TO BIS
8.6 -Table 6(Sockets-B)	-	20	15% DISCOUNT TO BIS
8.6 -Table 6(Maximum Inside Diameter of Internal Parallel Thread)	-	20	15% DISCOUNT TO BIS
9(DIMENSIONS OF STEEL FITTINGS (OTHER THAN TUBULARS))	-	20	15% DISCOUNT TO BIS
9.1-Table 7(Dimensions of Screwed Ends of Fittings-D )	-	20	15% DISCOUNT TO BIS
9.1-Table 7(Dimensions of Screwed Ends of Fittings-E )	-	20	15% DISCOUNT TO BIS
9.1-Table 7(Dimensions of Screwed Ends of Fittings-d )	-	20	15% DISCOUNT TO BIS
9.1-Table 7(Dimensions of Screwed Ends of Fittings-Taper )	-	20	15% DISCOUNT TO BIS
9.1-Table 8 (Dimensions of Elbows, Tees and Crosses, Equal-A)	-	20	15% DISCOUNT TO BIS
9.1-Table 9 (Dimensions of Elbows Reducing-A)	-	20	15% DISCOUNT TO BIS
9.1-Table 9 (Dimensions of Elbows Reducing-B)	-	20	15% DISCOUNT TO BIS
9.1-Table 10 (Dimensions of Tees, Reducing (on the Branch)-A)	-	20	15% DISCOUNT TO BIS
9.1-Table 10 (Dimensions of Tees, Reducing (on the Branch)-B)	-	20	15% DISCOUNT TO BIS
9.1-Table 11 (Dimensions of Tees, Reducing (on the Run and Branch, or on the Run Only)-A)	-	20	15% DISCOUNT TO BIS
9.1-Table 11 (Dimensions of Tees, Reducing (on the Run and Branch, or on the Run Only)-B)	-	20	15% DISCOUNT TO BIS
9.1-Table 12(Dimensions of Tees (Increasing on the Branch)-A)	-	20	15% DISCOUNT TO BIS
9.1-Table 12(Dimensions of Tees (Increasing on the Branch)-B)	-	20	15% DISCOUNT TO BIS
9.1-Table 13( Dimensions of Crosses, Reducing-A)	-	20	15% DISCOUNT TO BIS
9.1-Table 13( Dimensions of Crosses, Reducing-B)	-	20	15% DISCOUNT TO BIS
9.1-Table 14( Elbows, Tees and Crosses, Side Outlet, Equal-A)	-	20	15% DISCOUNT TO BIS
9.1-Table 14( Elbows, Tees and Crosses, Side Outlet, Equal-B)	-	20	15% DISCOUNT TO BIS
9.1-Table 15( Dimensions of Elbows, Round, Male and Female, Equal-A)	-	20	15% DISCOUNT TO BIS
9.1-Table 15( Dimensions of Elbows, Round, Male and Female, Equal-B)	-	20	15% DISCOUNT TO BIS
9.1-Table 15( Dimensions of Elbows, Round, Male and Female, Equal-Minimum Bore of Male End)	-	20	15% DISCOUNT TO BIS
9.1-Table 15( Dimensions of Elbows, Round, Male and Female, Equal-Maximum Bore of Male End)	-	20	15% DISCOUNT TO BIS
9.1-Table 16( Dimensions of Elbows, Equal, 135°-A)	-	20	15% DISCOUNT TO BIS
9.1-Table 17 (Dimensions of Y-Pieces, Female, Equal-A)	-	20	15% DISCOUNT TO BIS
9.1-Table 18 (Dimensions of Socket, Reducing-A)	-	20	15% DISCOUNT TO BIS
9.1-Table 19 (Dimensions of Caps-A)	-	20	15% DISCOUNT TO BIS
9.1-Table 19 (Dimensions of Caps-T)	-	20	15% DISCOUNT TO BIS
9.1-Table 20(Dimensions of Plug-Minimum Length of Thread for Basic Gauge)	-	20	15% DISCOUNT TO BIS
9.1-Table 20(Dimensions of Plug-Minimum Length of Thread for Basic Gauge-S)	-	10	15% DISCOUNT TO BIS
9.1-Table 20(Dimensions of Plug-Minimum Length of Thread for Basic Gauge-D)	-	10	15% DISCOUNT TO BIS
9.1-Table 20(Dimensions of Plug-Minimum Length of Thread for Basic Gauge-K)	-	10	15% DISCOUNT TO BIS
9.1-Table 21 (Dimensions of Elbows, Tees and Crosses, Male, Equal-A)	-	10	15% DISCOUNT TO BIS
9.1-Table 22(Dimensions of Y-Pieces and Angle Tees, Male, Equal-A )	-	10	15% DISCOUNT TO BIS
9.1-Table 22(Dimensions of Y-Pieces and Angle Tees, Male, Equal-B )	-	10	15% DISCOUNT TO BIS
9.1-Table 23( Dimensions of Twin Elbows and Sweep Tees, Male, Equal-B)	-	10	15% DISCOUNT TO BIS
9.1-Table 24(Dimensions of Socket Unions-A )	-	10	15% DISCOUNT TO BIS
9.1-Table 25 (Dimensions of Pipe Unions-A)	-	10	15% DISCOUNT TO BIS
9.1-Table 26 (Dimensions of Union Bends-A )	-	10	15% DISCOUNT TO BIS
9.1-Table 26 (Dimensions of Union Bends-B )	-	10	15% DISCOUNT TO BIS
9.1-Table 27 (Dimensions of Hexagon Bushes-L)	-	10	15% DISCOUNT TO BIS
9.1-Table 27 (Dimensions of Hexagon Bushes-T)	-	10	15% DISCOUNT TO BIS
9.1-Table 27 (Dimensions of Hexagon Bushes-A)	-	10	15% DISCOUNT TO BIS
9.1-Table 27 (Dimensions of Hexagon Bushes-B)	-	10	15% DISCOUNT TO BIS
9.1-Table 28 (Dimensions of Nipples, Hexagon, Equal-L)	-	10	15% DISCOUNT TO BIS
9.1-Table 28 (Dimensions of Nipples, Hexagon, Equal-T)	-	10	15% DISCOUNT TO BIS
9.1-Table 28 (Dimensions of Nipples, Hexagon, Equal-A)	-	10	15% DISCOUNT TO BIS
9.1-Table 28 (Dimensions of Nipples, Hexagon, Equal-C)	-	10	15% DISCOUNT TO BIS
9.1-Table 28 (Dimensions of Nipples, Hexagon, Equal-B)	-	10	15% DISCOUNT TO BIS
11.1(a)(Internal hydraulic Pressure Test)	-	1000	15% DISCOUNT TO BIS
11.1(a)(Internal Air Pressure Test)	-	1000	15% DISCOUNT TO BIS
11.2.1( Drift Expanding Test)	-	3000	15% DISCOUNT TO BIS
11.2.2 (Taper Screw Plug Test)	-	20	15% DISCOUNT TO BIS
14(WORKMANSHIP)	-	500	15% DISCOUNT TO BIS
13 and as per IS 4736(UNIFORMITY OF ZINC COATING)	-	700	15% DISCOUNT TO BIS
13 and as per IS 4736(MASS OF ZINC COATING)	-	1000	15% DISCOUNT TO BIS
Clause 13.1.3 (Adhesion Test)	-	300	15% DISCOUNT TO BIS
Clause 10(Joints )	-	3000	15% DISCOUNT TO BIS
Clause 9.2.3 (Threads tolerance )	-	20	15% DISCOUNT TO BIS
Clause 9.2.2 (Tolerance for alignment of threads )	-	20	15% DISCOUNT TO BIS
Clause 9.1, Table- 27(Normal Size (Internal Threads) (Dimensions of Hexagon Bushes) )	-	20	15% DISCOUNT TO BIS
Clause 9.1, Table- 27(Normal Size (External Threads) (Dimensions of Hexagon Bushes) )	-	20	15% DISCOUNT TO BIS
Clause 8.3.3(Parallel threads )	-	20	15% DISCOUNT TO BIS
7.1(Chemical Composition - Sulphur - Laddle Analysis IS 228)	-	-	-
7.1(Chemical Composition - Phosphorus - Laddle Analysis IS 228)	-	-	-
8.1-Table 1( DIMENSIONS OF TUBULARS-Pieces )	-	-	-
8.2-Table-2( DIMENSIONS OF TUBULARS-Nipples )	-	-	-
8.2-Table-2( DIMENSIONS OF TUBULARS-Nipples-A )	-	-	-
8.2-Table-2( DIMENSIONS OF TUBULARS-Nipples-B )	-	-	-
8.2-Table-2( DIMENSIONS OF TUBULARS-Nipples-C )	-	-	-
8.3.1-Table 3(DIMENSIONS OF TUBULARS-Longscrews (Connectors))	-	-	-
8.3.1-Table 3(DIMENSIONS OF TUBULARS-Longscrews (Connectors)-A)	-	-	-
8.3.1-Table 3(DIMENSIONS OF TUBULARS-Longscrews (Connectors)-B)	-	-	-
8.3.1-Table 3(DIMENSIONS OF TUBULARS-Longscrews (Connectors)-C)	-	-	-
8.3.2(DIMENSIONS OF TUBULARS-Longscrews (Connectors))	-	-	-
8.3.2(DIMENSIONS OF TUBULARS-Longscrews (Connectors)-The face of the back nut angle)	-	-	-
8.4.1 -Table 4(Bends and springs)	-	-	-
8.4.1 -Table 4(Bends and springs-A)	-	-	-
8.4.1 -Table 4(Bends and springs-B)	-	-	-
8.4.1 -Table 4(Bends and springs-R)	-	-	-
8.4.1 -Table 4(Bends and springs-C)	-	-	-
8.4.1 -Table 4(Bends and springs-D)	-	-	-
8.4.1 -Table 4(Bends and springs-E)	-	-	-
8.5-Table 5( Return Bends)	-	-	-
8.5-Table 5( Return Bends-A)	-	-	-
8.5-Table 5( Return Bends-B)	-	-	-
8.6 -Table 6(Sockets)	-	-	-
8.6 -Table 6(Sockets-A)	-	-	-
8.6 -Table 6(Sockets-B)	-	-	-
8.6 -Table 6(Maximum Inside Diameter of Internal Parallel Thread)	-	-	-
9(DIMENSIONS OF STEEL FITTINGS (OTHER THAN TUBULARS))	-	-	-
9.1-Table 7(Dimensions of Screwed Ends of Fittings-D )	-	-	-
9.1-Table 7(Dimensions of Screwed Ends of Fittings-E )	-	-	-
9.1-Table 7(Dimensions of Screwed Ends of Fittings-d )	-	-	-
9.1-Table 7(Dimensions of Screwed Ends of Fittings-Taper )	-	-	-
9.1-Table 8 (Dimensions of Elbows, Tees and Crosses, Equal-A)	-	-	-
9.1-Table 9 (Dimensions of Elbows Reducing-A)	-	-	-
9.1-Table 9 (Dimensions of Elbows Reducing-B)	-	-	-
9.1-Table 10 (Dimensions of Tees, Reducing (on the Branch)-A)	-	-	-
9.1-Table 10 (Dimensions of Tees, Reducing (on the Branch)-B)	-	-	-
9.1-Table 11 (Dimensions of Tees, Reducing (on the Run and Branch, or on the Run Only)-A)	-	-	-
9.1-Table 11 (Dimensions of Tees, Reducing (on the Run and Branch, or on the Run Only)-B)	-	-	-
9.1-Table 12(Dimensions of Tees (Increasing on the Branch)-A)	-	-	-
9.1-Table 12(Dimensions of Tees (Increasing on the Branch)-B)	-	-	-
9.1-Table 13( Dimensions of Crosses, Reducing-A)	-	-	-
9.1-Table 13( Dimensions of Crosses, Reducing-B)	-	-	-
9.1-Table 14( Elbows, Tees and Crosses, Side Outlet, Equal-A)	-	-	-
9.1-Table 14( Elbows, Tees and Crosses, Side Outlet, Equal-B)	-	-	-
9.1-Table 15( Dimensions of Elbows, Round, Male and Female, Equal-A)	-	-	-
9.1-Table 15( Dimensions of Elbows, Round, Male and Female, Equal-B)	-	-	-
9.1-Table 15( Dimensions of Elbows, Round, Male and Female, Equal-Minimum Bore of Male End)	-	-	-
9.1-Table 15( Dimensions of Elbows, Round, Male and Female, Equal-Maximum Bore of Male End)	-	-	-
9.1-Table 16( Dimensions of Elbows, Equal, 135°-A)	-	-	-
9.1-Table 17 (Dimensions of Y-Pieces, Female, Equal-A)	-	-	-
9.1-Table 18 (Dimensions of Socket, Reducing-A)	-	-	-
9.1-Table 19 (Dimensions of Caps-A)	-	-	-
9.1-Table 19 (Dimensions of Caps-T)	-	-	-
9.1-Table 20(Dimensions of Plug-Minimum Length of Thread for Basic Gauge)	-	-	-
9.1-Table 20(Dimensions of Plug-Minimum Length of Thread for Basic Gauge-S)	-	-	-
9.1-Table 20(Dimensions of Plug-Minimum Length of Thread for Basic Gauge-D)	-	-	-
9.1-Table 20(Dimensions of Plug-Minimum Length of Thread for Basic Gauge-K)	-	-	-
9.1-Table 21 (Dimensions of Elbows, Tees and Crosses, Male, Equal-A)	-	-	-
9.1-Table 22(Dimensions of Y-Pieces and Angle Tees, Male, Equal-A )	-	-	-
9.1-Table 22(Dimensions of Y-Pieces and Angle Tees, Male, Equal-B )	-	-	-
9.1-Table 23( Dimensions of Twin Elbows and Sweep Tees, Male, Equal-B)	-	-	-
9.1-Table 24(Dimensions of Socket Unions-A )	-	-	-
9.1-Table 25 (Dimensions of Pipe Unions-A)	-	-	-
9.1-Table 26 (Dimensions of Union Bends-A )	-	-	-
9.1-Table 26 (Dimensions of Union Bends-B )	-	-	-
9.1-Table 27 (Dimensions of Hexagon Bushes-L)	-	-	-
9.1-Table 27 (Dimensions of Hexagon Bushes-T)	-	-	-
9.1-Table 27 (Dimensions of Hexagon Bushes-A)	-	-	-
9.1-Table 27 (Dimensions of Hexagon Bushes-B)	-	-	-
9.1-Table 28 (Dimensions of Nipples, Hexagon, Equal-L)	-	-	-
9.1-Table 28 (Dimensions of Nipples, Hexagon, Equal-T)	-	-	-
9.1-Table 28 (Dimensions of Nipples, Hexagon, Equal-A)	-	-	-
9.1-Table 28 (Dimensions of Nipples, Hexagon, Equal-C)	-	-	-
9.1-Table 28 (Dimensions of Nipples, Hexagon, Equal-B)	-	-	-
11.1(a)(Internal hydraulic Pressure Test)	-	-	-
11.1(a)(Internal Air Pressure Test)	-	-	-
11.2.1( Drift Expanding Test)	-	-	-
11.2.2 (Taper Screw Plug Test)	-	-	-
14(WORKMANSHIP)	-	-	-
Clause 13.1.3 (Adhesion Test)	-	-	-
Clause 10(Joints )	-	-	-
Clause 9.2.3 (Threads tolerance )	-	-	-
Clause 9.2.2 (Tolerance for alignment of threads )	-	-	-
Clause 9.1, Table- 27(Normal Size (Internal Threads) (Dimensions of Hexagon Bushes) )	-	-	-
Clause 9.1, Table- 27(Normal Size (External Threads) (Dimensions of Hexagon Bushes) )	-	-	-
Clause 8.3.3(Parallel threads )	-	-	-

31 Dec, 2026

-
Included w.e.f. 07.11.2023

8511

INDIAN TESTING LABORATORY PRIVATE LIMITED

8171306

IS 269 (2015)

Ordinary portland cement - Specification (Sixth Revision)

OPC 33,43 ,53

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7 Table-3 v(Transverse Strength - IS 4031 Part 8 (Optional))	-	1000	-
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	1500	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	1500	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	1000	-
7 Table-3 iii b(Setting Time Final)	-	500	-
7 Table-3 iii a(Setting Time Initial)	-	500	-
7 Table-3 ii b(Expansion after aeration)	-	750	-
7 Table-3 ii b(Expansion by Autoclave)	-	1000	-
7 Table-3 ii a(Expansion after aeration)	-	0	-
7 Table-3 ii a(Expansion by Le Chatelier)	-	750	-
7 Table-3 i.(Fineness)	-	750	-
6.1 Table-2 viii(Alkali content)	-	1200	-
6.1 Table-2 vii(Chloride content)	-	1500	-
6.1 Table-2 vi(Loss on ignition)	-	500	-
6.1 Table-2 v(Total Sulphur Content calculated as Sulphuric Anhydride)	-	500	-
6.1 Table-2 iv(Magnesia)	-	500	-
6.1 Table-2 iii.(Insoluble residue)	-	500	-
6.1 Table-2 ii.(Ratio of percentage of alumina to that of iron oxide)	-	500	-
6 - Table - 1 i(Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-	500	-
11(Marking)	-	250	-

15 Aug, 2028

-
-

8512

INDIAN TESTING LABORATORY PRIVATE LIMITED

8171306

IS 4985 (2021)

UNPLASTICIZED PVC PIPES FOR POTABLE WATER SUPPLIES SPECIFICATION Fourth Revision

class 1 -6 & Group 1-3

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.1(Colour)	-	250	-
10.1(Surface Finish)	-	250	-
7.2.1.1 Table3(Angle of taper (Note-1))	-	250	-
10.7(Sulphated Ash Content)	-	1500	-
5(CLASSIFICATION OF PIPES)	-	250	-
7(DIMENSIONS-PIPE-Nominal Diameter)	-	500	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Minimum))	-	500	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Mamimum))	-	500	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. Variation)	-	500	-
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Minimum))	-	500	-
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Maximum))	-	500	-
7.1.1.2(DIMENSIONS-PIPE-Ovality (Maximum))	-	500	-
7.1.2.1(DIMENSIONS-PIPE-Thickness(Minimum))	-	500	-
7.1.2.1(DIMENSIONS-PIPE-Thickness(Maximum))	-	500	-
7.1.2.1(DIMENSIONS-PIPE-Average Thickness)	-	250	-
7.2.1(DIMENSIONS-Socket)	-	250	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Minimum Length)	-	500	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Minimum))	-	250	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Maximum))	-	250	-
7.2.1.2(a)-Table 5(DIMENSIONS-Sockets for elastomeric sealing ring joints-Minimum depth of engagement)	-	250	-
7.2.1.2-Table 4(DIMENSIONS-Sockets for elastomeric sealing ring joints-Socket inner Diameter)	-	250	-
8(SEALING RINGS)	-	500	-
9.1(PIPE ENDS)	-	250	-
10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity)	-	0	-
10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test)	-	1500	-
10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature)	-	1500	-
10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density)	-	1000	-
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test))	-	10000	-
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test))	-	2500	-
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)-for Integral Sealing Ring Sockets)	-	10000	-
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Integral Sealing Ring Sockets)	-	2500	-
11.1.1(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Plumbing pipes)	-	2500	-
11.2(Resistance to External Blows at 0°C)	-	1500	-
10.3(Effect on Water Test)	-	4000	-
6.1.2(PVC Resin)	-	5000	-
7.1.3(mean outside diameter, outside diameter at any point, and wall thickness of plumbing pipes)	-	250	-
7.1.4(Length)	-	250	-
6.1.1(VCM Content)	-	2000	-
7.2.1.2b(Maximum inner diameter of groove)	-	500	-
13.1(Marking)	-	250	-

15 Aug, 2028

-
-

8513

INDIAN TESTING LABORATORY PRIVATE LIMITED

8171306

IS 14333 (1996)

High Density Polyethylene Pipe For Sewerage -

PE 63, PE 80, PE 100

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10(Marking)	-	250	-
3(Designation)	-	250	-
4(Colour)	-	250	-
6(Dimensions of pipes)	-	500	-
7(Visual Appearance)	-	500	-
8.1(Hydraulic characteristics)	-	5000	-
8.2(Reversion)	-	1500	-
8.3(Density)	-	1000	-
8.4(Melt Flow Rate)	-	1500	-
Cl. 8.5, IS 2530-1963, Cl. 10(Cabon Black Content)	-	2000	-
Cl. 8.5, IS 2530-1963, Cl. 16(Carbon Black Dispersion)	-	1500	-
5.1(High Density Polyethylene)	-	4500	-
5.2(Anti Oxident)	-	2500	-

15 Aug, 2028

-
Except- Anti-Oxidant test (Cl.5.2)

8514

INDIAN TESTING LABORATORY PRIVATE LIMITED

8171306

IS 14151 : Part 2 (2008)

Irrigation equipment - Sprinkler pipes - Specification: Part 2 quick coupled polyethylene pipes and fittings (Second Revision)

Group I - III

24500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.2.1 (Visual and Workmanship Requirement)	-	250	-
6.2, 6.2.1 (Quick Coupled Fittings)	-	250	-
6.1.3.2 (Quick coupled fittings)	-	250	-
6.1.3.1.1(Weldability Test)	-	2500	-
6.1.2.2( Hydraulic Proof Test)	-	1500	-
6.1.1, 6.1.1.1(Leakage Test)	-	1500	-
5.3(Dimensions of Quick Coupled Sprinkler Saddles Table 1.)	-	1500	-
5.2(Dimensions of Quick Coupled Pump Connectors Table 3.)	-	1500	-
4.2.7(Valve openers Table 1 of IS 8008 (Part 2))	-	1500	-
4.2.7(Insert vatve couplers Table 1 of IS 8008 (Part 3))	-	1500	-
4.2.7(End caps Table 1 of IS 8008 (Part 9))	-	2500	-
4.2.7(Pipe ends Table 1 of IS 8008 (Part 6))	-	2500	-
4.2.7(Ferrule reducers Table 1 of IS 8008 (Part 5))	-	2500	-
4.2.7(Reducers Table 1 and 2 of IS 8008 (Part 4))	-	2500	-
4.2.1(Quick Coupled ~pe HDPE Fittings)	-	2500	-
4.2.2(Quick Coupled ~pe HDPE Fittings)	-	2500	-
4.2.3(Quick Coupled ~pe HDPE Fittings)	-	2500	-
4.2.4(Quick Coupled ~pe HDPE Fittings)	-	2500	-
4.2.5(Quick Coupled ~pe HDPE Fittings)	-	2500	-
4.2.6(Quick Coupled ~pe HDPE Fittings)	-	2500	-
4.2.7(Quick Coupled ~pe HDPE Fittings)	-	2500	-
4.1.5(Rubber Ring)	-	1000	-
4.1.4(b)(Holding Attachments for Coupler Parts)	-	1000	-
4.1.4(a)(Holding Attachments for Coupler Parts)	-	1000	-
4.1 .3(Workmanship and Appearance)	-	5000	-
4.1 .1.2.2(HDPE couplers)	-	1000	-
4.1 .1.2.1(HDPE couplers)	-	1000	-
4.1 (b)(HDPE couplers —)	-	1000	-
4.1 (a)( Quick Coupled Male and Female Couplers)	-	1000	-
Cl.6.1.3(Weldability Test- b) Acceptance test)	-	2500	-
Cl.6.1.3(Weldability Test- a) Quality test)	-	5000	-
Cl 4.1.5(Rubber rings- B) Change in hardness)	-	1500	-
4.1.1.2.1(Density)	-	1000	-
4.1.1.2.1(Melt flow rate at 190°C/5 kg)	-	1000	-
4.1.1.2.1(Female coupler (min))	-	1000	-
4.1.1.2.1(Male coupler (min))	-	500	-
4.1.5(a. Identification of Rubber Ring)	-	1000	-
4.1.5(b. Colour of rubber ring)	-	1000	-
3.0((a) Carbon black content)	-	1500	-
3.0((b) Carbon black dispersion)	-	1000	-
3.0((a) Outside diameter)	-	1000	-
3.0((ii) Ovality)	-	500	-
3.0(Out of Squareness)	-	500	-
3.0(Reversion test)	-	1500	-
3.0(Tensile strength at yield)	-	1500	-
3.0(Elongation at break)	-	1000	-
3.0(Fusion Compatibility Test (i)Quality Test at 3.5MPa induced stress for 165 hours at 80°C)	-	5000	-
3.0(Fusion Compatibility Test (ii)Acceptance Test at 3.8MPa induced stress for 48 hours at 80°C)	-	2500	-
8(Marking)	-	250	-

15 Aug, 2028

-
-

8515

INDIAN TESTING LABORATORY PRIVATE LIMITED

8171306

IS 14151 : Part 1 (1999)

Irrigation equipment - Sprinkler pipes - Specification: Part 1 polyethylene pipes (First Revision)

Group I-III

14500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.3(CLASSIFICATION OF PIPES)	-	250	-
4.1(melt flow rating (MFR) shall not exceed 1.10 g/10 min.)	-	1500	-
4.1.1(density shall be between 940.4 kg/m’ and 958.4 kg/m3 (both inclusive) when determined at 27°C according to procedure prescribed in Annex A of IS 7328. The value of the density shall also not differ from the nominal value by more than 3 kg/m2 as per 5.2.1.1 of IS 7328.)	-	1000	-
4.1.2(The MFR of the material shall be between 0.2 to 1.1 (both inclusive) when tested at 190 T at a nominal load of 50 N by the method prescribed in 7 of IS 2530. The MFR of the material shall also be within 20% of the value declared by the manufacturer.’)	-	1500	-
Cl. 4.2 , IS 2530-1963, Cl. 10(Cabon Black Content)	-	2000	-
4.3(Anti-oxidant)	-	2500	-
5.1 table -1(DIMENSIONS OF PIPES)	-	500	-
5.1.2(Ovality)	-	250	-
6.1(VISUAL APPEARANCE)	-	250	-
Cl 7.1(Hydraulic Characteristics - Acceptance test)	-	2500	-
7.2(Reversion Test)	-	1500	-
7.3(Tensile Test)	-	1500	-
Cl.7.4(Fusion Compatibility Test- b) Acceptance test)	-	5000	-
7.5(Density)	-	1000	-
7.6(Melt now Rate (MFR))	-	1500	-
(Cl.4.2)(Carbon black- b) Dispersion of carbon black)	-	1000	-
(Cl.4.2)(Carbon black- a)carbon content)	-	2000	-
Cl.7.4(Fusion Compatibility Test- a) Quality test)	-	2500	-
Cl 7.1(Hydraulic Characteristics - Quality test)	-	2500	-
Cl.5(Dimensions of pipe - ii) Wall thickness maximum)	-	500	-
Cl.5(Dimensions of pipe - ii) Wall thickness minimum)	-	500	-
Cl.5(Dimensions of pipe - i) Outside diameter)	-	500	-
10(Marking)	-	250	-

15 Aug, 2028

-
Except- Anti-Oxidant test (Cl.4.3)

8516

INDIAN TESTING LABORATORY PRIVATE LIMITED

8171306

IS 15328 (2003)

Unplasticized Non-Pressure Polyvinyl Chloride ( PVC -U ) Pipes for use in Underground Drainage and Sewerage Systems -

Group I-III

22000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5,5.2(Composition of the material The material shall contain a minimum of 0.3 percent of rutile grade titanium dioxide.)	-	1000	-
6.1,6.1.1 IS 12235 (Part 1) Table 1(Dimension of Pipes: Mean outside Diameter, dem)	-	250	-
6.1,6.1.1 IS 12235 (Part 1) Table 1(Outside Diameter at any point, de)	-	250	-
6.1.2 IS 4985 Table 2(Wall Thickness, e )	-	250	-
6.1.3 (Length of Pipe)	-	250	-
6.1.4, Table 3(Dimensions of integral sockets and spigot ends :- a) Elastomeric Sealing Ringsockets and spigot ends i)Meean inside dia. Of socket, dsm)	-	250	-
6.1.4, Table 3(ii) Min. depth of engagement, A. )	-	250	-
6.1.4 Table 3(iii) Depth of sealing Zone C )	-	250	-
6.1.4, Table 3(iv) Length of spigot, l1)	-	250	-
6.1.4, Table 3(v) Chamfer length, H : Approx.)	-	250	-
6.1.4.1 (wall thickness of sockets e2 min=0.9e )	-	250	-
6.1.4.1 (e3min=0.75e)	-	250	-
6.1.4, Table 4(b) Solvent Cement Joint sockets and spigot ends i) Mean inside dia. Of socket, dsm)	-	250	-
6.1.4, Table 4(ii) Length of Solvent Cement socket, l2 )	-	250	-
6.1.4, Table 4(iii) Length of spigot, l1, 100 mm Min.)	-	250	-
6.1.4, Table 4(iv) Chamfer length, H, 7 mm Approx.)	-	250	-
7.1(Appearance:- )	-	250	-
7.2(Colour )	-	250	-
7.3 IS 1223S ( Part 2)(Vicat Softening Temperature When determined according to IS 1223S ( Part 2), shall not be lessthan 79°C.)	-	1500	-
7.4 IS 1223S ( Part 5)(Longitudinal Reversion: When tested according to the methodprescribed in IS 1223S ( Part 5), shall not exceed ± 5 percent. The pipe shall not exhibit any blisters, bubbles or crackson completion of the test.)	-	1500	-
8.1 Annex B(Resistance to External Blows at 0ºC: When tested according to the method prescribed in Annex B, the pipes hall have a true impact rate of not more than I0 percent.)	-	2000	-
8.2 Annex C Table 5(Ring Stiffness: When tested according to the method described in Annex C,the ring stiffness of the pipe shall be as stated in Table 5)	-	1500	-
8.3 IS 12235 ( Part 8/ Sec 1 ) Table 6(Resistance to internal Hydrostatic Pressure(Type Test) a) Acceptance Test:(1h at 27 0 C) )	-	2500	-
8.3 IS 12235 ( Part 8/ Sec 1 ) Table 6(b) Type Test:(1000h at 60 0 C) )	-	10000	-
9 9.1, IS 5382(JOINTS:- a) Elastomeric Sealing Rings)	-	1500	-
10.1.1 Annex D(Internal hydrostatic pressure test for elastomeric sealing ring joints)	-	2500	-
10.1.2 Annex E(Internal negative hydrostatic pressure test (internal vacuum) for elastomeric sealing ring joints)	-	2500	-
10.2.1(Internal hydrostatic pressure test for solvent cemented Joints)	-	2500	-
10.2.2(Internal negative hydrostatic pressure test (internal vacuum)for solvent cemented joints)	-	2500	-
'7.5 (amdt.7)(Effect on Water (Type test))	-	0	-
5.3(Qualitative)	-	0	-
12(Marking)	-	0	-

15 Aug, 2028

-
-

8517

INDIAN TESTING LABORATORY PRIVATE LIMITED

8171306

IS 13592 (2013)

Unplasticized Polyvinyl Chloride (PVC-U) Pipes for Soil and Waste Discharge System Inside and Outside Buiildings Including Ventilation and Rainwater System

Type A & B

13000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.5(Surface colour of the pipes shall be dark shade of grey)	-	200	-
Cl6.3(The composition shall be based on PVC resin having a K-value of 64 or greater when tested in accordance with IS 4669)	-	1500	-
Cl.7.1(Mean outside diameter, outside diameter at any point for Type A and Type B pipes manufactured plain or with socket shall be as given in Table 1. Dimensions shall be measured according to the method given in IS 12235 (Part 1).)	-	250	-
Cl.7.1( outside diameter at any point for Type A and Type B pipes manufactured plain or with socket shall be as given in Table 1. Dimensions shall be measured according to the method given in IS 12235 (Part 1).)	-	250	-
Cl.7.1( wall thickness at any point for Type A and Type B pipes manufactured plain or with socket shall be as given in Table 1. Dimensions shall be measured according to the method given in IS 12235 (Part 1).)	-	250	-
Cl.7.2(Pipes shall be supplied in nominal lengths of 2, 3, 4 or 6 metres either plain or with socket for solvent cementing/grooved socket. Tolerances on specified length shall be + 10 mm and – 0 mm.The nominal length of the pipe with socket for solvent cementing/grooved socket shall be as given in Fig. 1.)	-	250	-
Cl.7.3.1(Minimum wall thickness of socket on pipes shall be as given in Table 2 read with Fig. 2 and Fig. 3.)	-	250	-
Cl.7.3.2(Dimensions of sockets for solvent cementing and grooved sockets of pipes shall be as given in Tables 3 and 4 respectively, read with Fig. 2 and 3.)	-	250	-
Cl.8.1(The internal and external surface of the pipes shall be smooth and clean, and free from grooving and other defects. The end shall be clearly cut and shall be square with the axis of the pipe. The end may be chamfered on the plain side.)	-	250	-
Cl.8.2(When tested by the method described in IS 12235 (Part 5), a length of pipe sample of 200 ± 20 mm shall not alter in length by more than 5 percent. In the case of socket ended pipes, this test shall be carried out on the plain portion of pipe taken at least 100 mm away from the root of the socket.)	-	1500	-
Cl8.3(This test shall be carried out for socket end pipes only. When tested by the method described in IS 12235 (Part 6), the test specimens shall not show blisters, excessive delamination or cracking or signs of weld line splitting.)	-	1500	-
Cl.8.4(When determined in accordance with IS 12235 (Part 2), the vicat softening temperature of the specimen shall not be less than 79°C.)	-	1500	-
Cl.8.5(After the required period of exposure, the tensile strengths of two samples when tested as per IS 12235 (Part 13) shall not show difference of more than 20 percent of their initial tensile strengths)	-	2500	-
Cl. 9, IS 12235 Part 7(Resistance to Sulphuric Acid)	-	2000	-
Cl.10.1(When tested by method prescribed in IS 12235 (Part 9),the pipe shall have a true impact rate of not more than 10 percent. Mass of striker and height of fall shall be as per Annex A.)	-	1500	-
Cl.10.2(When determined in accordance with the method described in IS 12235 (Part 13), the tensile strength at break shall not be less than 45 MPa.)	-	1500	-
Cl.10.3(The axial shrinkage shall not exceed 2 percent when determined in accordance with Annex B.)	-	1500	-
Cl.11.(Jointing of solvent cementing joints is to be carried out using solvent conforming to IS 14182. Apply a pressure of 0.05 MPa for a period of 15 min and there should be no leakage at any joint.)	-	1500	-
Cl. 12, IS 12235 Part 11(Resistance to Di-Chloro-Methane)	-	1200	-
8.6(Effect on Water Test)	-	3500	-
14(Marking)	-	250	-

15 Aug, 2028

-
-

8518

INDIAN TESTING LABORATORY PRIVATE LIMITED

8171306

IS 12701 (1996)

Rotational moulded polyethylene water storage tanks - specification (First Revision)

Group 1, 2, 3 & 4 CYLINDRICAL & VERTICAL TANKS

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.3(Carbon Black Content )	-	1500	-
4.2.3(Carbon Dispersion Test)	-	1000	-
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	1000	-
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	1000	-
6.1(Finish)	-	500	-
7.1.1(Resistance to Deformation)	-	1500	-
7.1.2(Resistance to Deformation)	-	1500	-
7.2(Resistance to Impact)	-	2000	-
7.3(Test for Top Load Resistance)	-	1500	-
7.4(Tensile Strength)	-	1500	-
7.5(Flexural Modulus)	-	2500	-
7.6(overall Migration)	-	3500	-
9.2.1(Man-Hole and Hand-Hole Lids)	-	1000	-
9.1(Lid Thickness)	-	750	-
5.4(Wall Thickness above effective height)	-	750	-
5.2 Table 2 (7)(Minimum Wall Thickness)	-	750	-
5.1 Table 1 (7)(Minimum Weight of Tank (Without Lid))	-	750	-
4.2.1(Density)	-	1500	-
4.2.2(MFI)	-	1500	-
4.1(MATERIALS)	-	250	-
10(MARKING)	-	250	-

15 Aug, 2028

-
-

8519

Alpha Test House Services LLP

9138706

IS 1239 : Part 1 (2004)

Steel tubes, tubulars and other wrought steel fittings - Specification: Part 1 steel tubes (Sixth Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8(Outer Diameter, Thickness & Mass)	-	500	15% DISCOUNT TO BIS
Cl 10.1(Manufacturing )	-	1000	15% DISCOUNT TO BIS
Cl 10.1.1(Manufacturing )	-	1000	15% DISCOUNT TO BIS
Cl 12(Workmanship)	-	1000	15% DISCOUNT TO BIS
Cl 14(Tensile Test, Flattening Test & Bend Test)	-	4000	15% DISCOUNT TO BIS
Cl 15(Workmanship)	-	1000	15% DISCOUNT TO BIS
7, 6.1.1(CARBON)	-	250	15% DISCOUNT TO BIS
7, 6.1.1(SULPHUR)	-	250	15% DISCOUNT TO BIS
7, 6.1.1(PHOSPHURS)	-	250	15% DISCOUNT TO BIS
7, 6.1.1(MANGANESE)	-	250	15% DISCOUNT TO BIS
7, 6.1.1(NITROGEN)	-	250	15% DISCOUNT TO BIS
7, 6.1.1(SILICON)	-	250	15% DISCOUNT TO BIS
7, 6.1.1(ALUMINIUM)	-	250	15% DISCOUNT TO BIS
Clause 8.1 (Table3,4,5)(Nominal Bore)	-	100	15% DISCOUNT TO BIS
Clause 11.1(Random Length)	-	100	15% DISCOUNT TO BIS
Clause 11.2(Exact Length)	-	100	15% DISCOUNT TO BIS
Clause 11.3(Approximate Length)	-	200	15% DISCOUNT TO BIS
Cl. 14.1.1(Elongation)	-	500	15% DISCOUNT TO BIS
12 AND AS PER IS 4736(MASS OF ZINC COATING)	-	1000	15% DISCOUNT TO BIS
12 AND AS PER IS 4736(UNIFORMITY OF ZINC COATING)	-	1000	15% DISCOUNT TO BIS
Clause - 6.1.1, Table-1(NITROGEN)	-	250	15% DISCOUNT TO BIS
Cl 8(Outer Diameter, Thickness & Mass)	-	500	15% DISCOUNT TO BIS
Cl 10.1(Manufacturing )	-	1000	15% DISCOUNT TO BIS
Cl 10.1.1(Manufacturing )	-	1000	15% DISCOUNT TO BIS
Cl 12(Workmanship)	-	1000	15% DISCOUNT TO BIS
Cl 14(Tensile Test, Flattening Test & Bend Test)	-	4000	15% DISCOUNT TO BIS
Cl 15(Workmanship)	-	100	15% DISCOUNT TO BIS
7, 6.1.1(CARBON)	-	250	15% DISCOUNT TO BIS
7, 6.1.1(SULPHUR)	-	250	15% DISCOUNT TO BIS
7, 6.1.1(PHOSPHURS)	-	250	15% DISCOUNT TO BIS
7, 6.1.1(MANGANESE)	-	250	15% DISCOUNT TO BIS
7, 6.1.1(NITROGEN)	-	250	15% DISCOUNT TO BIS
7, 6.1.1(SILICON)	-	250	15% DISCOUNT TO BIS
7, 6.1.1(ALUMINIUM)	-	250	15% DISCOUNT TO BIS
Clause 8.1 (Table3,4,5)(Nominal Bore)	-	100	15% DISCOUNT TO BIS
Clause 11.1(Random Length)	-	100	15% DISCOUNT TO BIS
Clause 11.2(Exact Length)	-	100	15% DISCOUNT TO BIS
Clause 11.3(Approximate Length)	-	200	15% DISCOUNT TO BIS
Cl. 14.1.1(Elongation)	-	500	15% DISCOUNT TO BIS
12 AND AS PER IS 4736(MASS OF ZINC COATING)	-	100	15% DISCOUNT TO BIS
12 AND AS PER IS 4736(UNIFORMITY OF ZINC COATING)	-	1000	15% DISCOUNT TO BIS
Clause - 6.1.1, Table-1(NITROGEN)	-	250	15% DISCOUNT TO BIS
13.0(Leak Proof Test)	-	1500	15% DISCOUNT TO BIS

31 Dec, 2026

-
-

8520

INDIAN TESTING LABORATORY PRIVATE LIMITED

8171306

IS 1489 : Part 2 (2015)

Portland - Pozzolana cement - Specification: Part 2 calcined clay based

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	500	-
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	500	-
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	500	-
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	500	-
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	500	-
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	750	-
7 -Table 2- i(Fineness 4031 Part 2)	-	500	-
7 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	500	-
7 -Table 2- ii- a(Expansion after aeration - 4031 Part 3)	-	500	-
7 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	500	-
7 -Table 2- ii- b(Expansion after aeration- 4031 Part 3)	-	500	-
7 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	500	-
7 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	500	-
7 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	1500	-
7 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	1200	-
7 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	1000	-
7 -Table 2- v(Transverse Strength - IS 4031 Part 8 (Optional))	-	1000	-
7 -Table 2- vi(Drying Shrinkage- IS 4031 Part 10)	-	1500	-
11(Marking)	-	250	-
4(RAW MATERIAL)	-	250	-

15 Aug, 2028

-
-

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number