BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15393 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

8851

Akshat Test Lab & Calibration Services, Ghaziabad

8186526

IS 694 (2010)

Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 450/750 v (Fourth Revision)

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
13(Cable code)	-	0	-
11.2(Legibility)	-	100	-
11.1(Durability)	-	100	-
11(Identification)	-	0	-
10.9(Additional ageing test (OU cables only) -HV test (at 60±3oC))	-	0	-
10.4(Flammability test- Unaffected portion)	-	100	-
10.4(Flammability test-Burning after flame removal)	-	200	-
table 1 e) 3) (IR constant- max. Temp)	-	250	-
table 1 e) 3) (IR constant- Room temp )	-	250	-
table 1 e) 3) (Volume Resistivity - Maximum temp)	-	250	-
table 1 e) 3) (Volume Resistivity - Room temp )	-	250	-
10.2(HV (room temperature))	-	0	-
10.1(HV (water immersion))	-	0	-
10.1(HV (water immersion))	-	0	-
10.8(Smoke density rating)	-	0	-
10.6(Halogen evolution)	-	0	-
10.7(Temperature index)	-	0	-
10.5(Oxygen index)	-	0	-
Table 1 iii) d) 9)(Cold impact for sheath)	-	200	-
Table 1 iii) d) 8)(Cold bend for sheath)	-	200	-
Table 1 iii) c) 9)(Cold impact for insulation)	-	250	-
Table 1 iii) c) 8)(Cold bend for insulation)	-	250	-
Table 1(Category Code)	-	0	-
Table 1 iii) d) 7)(Thermal stability- Sheath )	-	200	-
Table 1 iii) c) 7)(Thermal stability- Insulation )	-	150	-
Table 1 iii) d) 6)(Hot deformation -Indentation depth - Sheath )	-	0	-
Table 1 iii) c) 6)(Hot deformation - Indentation depth- Insulation)	-	200	-
Table 1 iii) d) 5)(Heat shock-Sheath )	-	200	-
Table 1 iii) c) 5)(Heat shock-Insulation )	-	200	-
Table 1 iii) d) 4)(Cracks Observed)	-	0	-
Table 1 iii) d) 4)(Shrinkage- Sheath )	-	100	-
Table 1 iii) c) 4)(Cracks Observed)	-	0	-
Table 1 iii) c) 4)(Shrinkage-Insulation)	-	100	-
Table 1 iii) d) 2)(Loss of mass- Sheath )	-	200	-
Table 1 iii) c) 2)(Loss of mass- Insulation )	-	100	-
Table 1 iii) d) 3)(Sheath- Elongation variation)	-	0	-
Table 1 iii) d) 3)(Sheath- TS variation)	-	0	-
Table 1 iii) d) 3)(Sheath- Elongation (After ageing))	-	150	-
Table 1 iii) d) 3)(Sheath- Tensile strength (After ageing))	-	150	-
Table 1 iii) d) 1)(Sheath- Elongation (Without ageing))	-	150	-
Table 1 iii) d) 1)(Sheath -Tensile strength (Without ageing))	-	150	-
Table 1 iii) c) 3)(Elongation variation)	-	0	-
Table 1 iii) c) 3)(TS variation)	-	0	-
Table 1 iii) c) 3)(Elongation (After ageing))	-	150	-
Table 1 iii) c) 3)(Tensile strength (After ageing))	-	150	-
Table 1 iii) c) 1)(Elongation (Without ageing))	-	150	-
Table 1 iii) c) 1)(Tensile strength (Without ageing))	-	150	-
(Cl. 18.1.4) (Cl. 19.1.5) (Cl. 20.1.4) (Cl. 22.1.4)(Colour of Sheath)	-	0	-
8.3(Thickness of Sheath)	-	100	-
5.2(Application )	-	0	-
5.3(Thickness of Insulation)	-	100	-
9.1(Ovality)	-	0	-
9(Overall dimensions)	-	0	-
10.11(Per sulphate test (for tinned Cu cable only))	-	0	-
4.2(Conductor resistance test)	-	100	-
4.1(Wrapping test (for Al))	-	100	-
4.1(Tensile test (for Al)- After Stranding)	-	150	-
4.1(Tensile test (for Al)-Before Stranding)	-	150	-
4.1(Annealing test (for copper))	-	100	-
(Cl.6.1.3 of IS 8130:2013)(Flexible Conductors (Classes 5))	-	0	-
(Cl.6.1.3 of IS 8130:2013)( Flexible Conductors (Classes 5))	-	0	-
(Cl.6.1.3 of IS 8130:2013)(Stranded circular non compacted conductors(Class-2))	-	0	-
(Cl.6.1.3 of IS 8130:2013)(Stranded compacted circular conductors and shaped conductors (Class 2))	-	0	-
(Cl.6.1.3 of IS 8130:2013)(Stranded circular non compacted conductors (Class-2))	-	0	-
(Cl.6.1.3 of IS 8130:2013)(Stranded circular non compacted conductors (Class-2))	-	0	-
(Cl.6.1.3 of IS 8130:2013)(Solid Conductor (Class 1))	-	0	-
(Cl.6.1 of IS 8130:2013)(Solid Conductor (Class 1))	-	0	-
(Cl.6.1 of IS 8130:2013)(Solid Conductor (Class 1))	-	0	-
(Cl.16.1) (Cl.19.1)(Conductor- Diameter )	-	200	-
(Cl.16.1) (Cl.19.1)(Conductor)	-	0	-
(Cl.16.1) (Cl.19.1)(Conductor)	-	0	-
(Cl.16.1) (Cl.19.1)(Conductor)	-	0	-
(Cl. 18.1.3) (Cl. 19.1.4) (Cl. 20.1.3) (Cl. 21.1.3) (Cl. 22.1.3)(Assembly of cores )	-	0	-
12(CONSTRUCTION Core Identification)	-	0	-
8.1(Sheath Material )	-	0	-
7(Binder Tape)	-	0	-
6.2(Filler)	-	0	-
6.1(Filler)	-	0	-
5.1(Insulation)	-	0	-
4.4(Joints in Conductor)	-	100	-
4.4(Joints in Conductor)	-	0	-
4.1(Conductor - Material)	-	0	-
4.1(Conductor - Material)	-	0	-
10.11(Persulphate Test )	-	0	-
12.0(Core identification)	-	100	-
4, IS 8130(Construction of conductor)	-	0	-
Table 2, IS 8130(No fo wire in a conductor)	-	100	-
8.3(Minimum thickness of Sheath)	-	100	-
8.3(Avarage thickness of Sheath)	-	100	-
5.3(Minimum thickness of insulation)	-	100	-
5.3(Avarage thickness of insulation)	-	100	-
Table 4(Copper purity test)	-	200	-
10.3(Spark test)	-	0	-
table 1, 4.2(insulation resistance test)	-	200	-
5.4(Mechanical properties before and after ageing)	-	100	-
10.3(Spark Test)	-	0	-
4.1(Material)	-	0	-
4.2(Electrical Resistance)	-	200	-
5(INSULATION)	-	0	-
6(FILLER)	-	0	-
7(BINDER TAPE)	-	0	-
8(SHEATH)	-	0	-
9(OVERALL DIMENSIONS)	-	100	-
10.1(High Voltage Test (Water Immersion Test))	-	200	-
10.2(High Voltage Test (at Room Temperature))	-	200	-
10.3(Spark Test)	-	200	-
10.4(Flammability Test)	-	200	-
10.5(Oxygen Index Test)	-	200	-
10.6(Test for Halogen Acid Gas Evolution)	-	200	-
10.7(Test for Temperature Index)	-	200	-
10.8(Smoke Density Rating)	-	200	-
10.9(Additional Ageing Test (for Cables for Outdoor Use)	-	100	-
10.1(Flex Test)	-	200	-
10.11(Persulphate Test)	-	100	-
11(IDENTIFICATION)	-	0	-
12(CORE IDENTIFICATION)	-	0	-
13(CABLE CODE)	-	0	-
15(PACKING AND MARKING)	-	100	-
16.1(Construction)	-	100	-
16.2(Tests)	-	0	-
17(SINGLE CORE NON-SHEATHED CABLES WITH FLEXIBLE CONDUCTOR FOR GENERAL PURPOSE (MAXIMUM CONDUCTOR TEMPERATURE 70°C OR 85°C))	-	0	-
18(SINGLE AND MULTICORE CIRCULAR PVC INSULATED AND SHEATHED CABLES WITH RIGID CONDUCTOR (CLASS 1 AND CLASS 2) FOR GENERAL PURPOSE ) FOR MAXIMUM CONDUCTOR TEMPERATURE (70°C OR 85°C))	-	0	-
19(SINGLE AND MULTICORE CIRCULAR PVC INSULATED AND SHEATHED CABLES/CORDS WITH FLEXIBLE CONDUCTOR (CLASS 5) FOR GENERAL PURPOSE (MAXIMUM CONDUCTOR TEMPERATURE 70°C OR 85°C))	-	0	-
20(MULTICORE CIRCULAR PVC INSULATED AND SHEATHED CABLES WITH FLEXIBLE CONDUCTOR (CLASS 5) FOR GENERAL PURPOSE (FOR MAXIMUM CONDUCTOR TEMPERATURE 70°C OR 85°C))	-	0	-
21(ARALLEL TWIN AND TWISTED TWIN FLEXIBLE PVC INSULATED UNSHEATHED CORDS (CLASS 5) FOR GENERAL PURPOSE (FOR MAXIMUM CONDUCTOR TEMPERATURE 70°C OR 85°C))	-	0	-
22(TWO AND THREE CORE FLAT CABLES WITH PVC INSULATION AND SHEATHED (CLASS 2 OR 5) FOR GENERAL PURPOSE( FOR MAXIMUM CONDUCTOR TEMPERA TURE 70°C OR 85°C))	-	0	-
(4.3 of IS 8130:2013)(Form of Conductor)	-	0	-
( 4.4.1 of IS 8130:2013)(Joints in Conductor)	-	0	-
(4.4.2 of IS 8130:2013)(Joints in Conductor Solid Conductors (Aluminium Conductors only))	-	0	-
(Cl.6.1.1 of IS 8130:2013)(Solid Conductor (Class 1))	-	0	-
(Cl.6.1.2 of IS 8130:2013)(Solid Conductor (Class 1))	-	0	-
(Cl.6.1.3 of IS 8130:2013)(Solid Conductor (Class 1))	-	0	-
(6.2.1 of IS 8130:2013)(Stranded Circular Non-compacted Conductors (Class 2))	-	0	-
(6.2.2 of IS 8130:2013)(Stranded Circular Non-compacted Conductors (Class 2))	-	0	-
(6.2.3 of IS 8130:2013)(Stranded Circular Non-compacted Conductors (Class 2))	-	0	-
(6.3.1 of IS 8130:2013)(Stranded Compacted Circular Conductors and Shaped Conductors (Class 2))	-	0	-
(6.3.2 of IS 8130:2013)(Stranded Compacted Circular Conductors and Shaped Conductors (Class 2))	-	0	-
(6.3.3 of IS 8130:2013)(Stranded Compacted Circular Conductors and Shaped Conductors (Class 2))	-	0	-
( 6.4.1 of IS 8130:2013)(Flexible Conductors (Class 5))	-	0	-
(6.4.2 of IS 8130:2013)(Flexible Conductors (Class 5))	-	0	-
( 6.4.3 of IS 8130:2013)(Flexible Conductors (Class 5))	-	0	-
Cl.19.1.4(Assembly of Cores)	-	0	-
Cl. 8.2(Application of Sheath)	-	0	Per core For BIS only = 9000/- & Others = 9000/-, Additional per core=5000/- additional if 'FR' For BIS only = 5000/- & Others = 10000/- additional if FR-LSH For BIS only = 15000/- & Others = 18000/-

-
-

8852

Akshat Test Lab & Calibration Services, Ghaziabad

8186526

IS 302 : Part 2 : Sec 80 (2017)

Household and similar electrical appliances - Safety: Part 2 - 80 particular requirements for fans (First Revision)

11200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
32.0(Radiation, Toxicity and Similar Hazards)	-	0	-
31.0(Resistance To Rusting)	-	500	-
30.0(Resistance To Heat and Fire)	-	700	-
29.0(Creepage Distances and Clearances)	-	500	-
28.0(Screws and Connections)	-	500	-
27.0(Provision For Earthing)	-	500	-
26.0(Terminals for external conductors)	-	500	-
25.0(Supply Connection and External Flexible Cords)	-	700	-
24.0(Components)	-	500	-
23.0(Internal Wiring)	-	500	-
22.0(Construction)	-	500	-
21.0(Mechanical Strength)	-	500	-
20.0(Stability and mechanical hazards)	-	500	-
19.0(Abnormal Operation)	-	1000	-
17.0(Overload Protection of transformer and associated circuit)	-	500	-
16.0(Leakage current and Electric strength (After Humidity (Environmental) Treatment))	-	200	-
15.0(Moisture resistance)	-	1000	-
14.0(Transient Overvoltage)	-	0	-
13.0(Leakage Current and electric strength at operating temperature)	-	300	-
11.0(Heating)	-	1000	-
10.0(Input and Current)	-	500	-
8.0(Protection against access to live parts)	-	200	-
7.0(Classification)	-	0	-
6.0(Marking and Instructions)	-	300	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Harmonics)	-	0	-
4(GENERAL REQUIREMENT)	-	0	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	0	For BIS only = Rs 11200/- & For others = Rs 30,000/-

-
Exclusion: Cl.19.11.4.1 to 19.11.4.7

8853

Akshat Test Lab & Calibration Services, Ghaziabad

8186526

IS 3854 (2023)

Switches for Domestic and Similar Purposes - Specification (Third Revision)

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General Requirements)	-	0	-
Cl-5(General notes on tests)	-	0	-
Cl-6(Rating)	-	100	-
Cl-7(Classification)	-	100	-
Cl-8(Marking)	-	100	-
Cl-9(Checking of dimensions)	-	100	-
Cl-10.1, 10.2(Prevention of Access to Live Parts)	-	100	-
Cl-10.3(Requirements for Accessible Metal Parts)	-	100	-
Cl-10.4(Requirements for Insulation of the Mechanism)	-	100	-
Cl. 10.5(Requirements for Insulation of the Mechanism with Respect to the Surrounding Environment)	-	100	-
Cl-10.6(Requirements for Switches Operated Indirectly)	-	100	-
Cl-10.7(Requirements for Switches with Replaceable Pull Cord)	-	100	-
Cl-11(Provision for earthing)	-	250	-
Cl-12(Terminals)	-	250	-
Cl-13(Constructional requirements)	-	250	-
Cl-14(Mechanism)	-	250	-
Cl-15.1(Resistance to Ageing)	-	250	-
Cl-15.2(Protection Provided by Enclosures of Switches)	-	250	-
Cl-15.3(Resistance to Humidity)	-	250	-
Cl-16.1(General)	-	400	-
Cl-16.2(Test for Measuring the Insulation Resistance)	-	250	-
Cl-16.3(Electric Strength Test)	-	400	-
Cl-17(Temperature rise)	-	400	-
Cl-18(Making and breaking capacity)	-	500	-
Cl-19(Normal operation)	-	500	-
Cl-20(Mechanical strength)	-	500	-
Cl-21(Resistance to heat)	-	200	-
Cl-22(Screws, current carrying parts and connections)	-	200	-
Cl-23(Creepage distances, clearances and distance through sealing compound)	-	200	-
Cl-24.1(Resistance to abnormal heat and fire)	-	200	-
Cl-24.2(Resistance to tracking)	-	200	-
Cl-25(Resistance to rusting)	-	300	-
19.1(Test for Switches Intended for Inductive Loads)	-	300	-
19.2(Test for Switches Intended for Externally Ballasted Lamp Loads)	-	300	-
19.3(Test for Switches Intended for Self-ballasted Lamp Loads)	-	200	-
13.5(Attachment of knobs)	-	100	-
12.3.11(Table 11)(Test Current for the Verification of Electrical and Thermal Stresses in Normal Use of Screwless Terminals)	-	50	6A & 6AX For BIS only = 8000/- & Others = 10000/- 10A & 10AX to 20A to 20AX For BIS only = 10000/- & Others = 15000-18000 32A For BIS only = 12000/-Others = 20000/-
12.3.12(Table 13)(Deflection Test Forces)	-	50	-

-
-

8854

Akshat Test Lab & Calibration Services, Ghaziabad

8186526

IS 1293 (2019)

Plugs and socket - Outlets of rated Voltage up to and including 250 Volts and rated current up to and including 16 amperes - Specification (Third Revision)

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(RATINGS)	-	50	-
7.1.1(Accessories Classification)	-	50	-
7.1.2(Accessories Classification)	-	0	-
7.1.3(Accessories Classification)	-	0	-
7.1.4(Accessories Classification)	-	0	-
7.1.5(Accessories Classification)	-	0	-
7.2.1(Socket-Outlets Classification)	-	0	-
7.2.2(Socket-Outlets Classification)	-	0	-
7.2.3(Socket-Outlets Classification)	-	0	-
7.2.4(Socket-Outlets Classification)	-	0	-
7.3(Plug Classification)	-	0	-
8(Marking)	-	200	-
9(CHECKING OF DIMENSIONS)	-	250	-
10(PROTECTION AGAINST ELECTRIC SHOCK)	-	350	-
11(Provision for earthing)	-	500	-
12(terminals)	-	400	-
13.1(Construction of fixed Socket Outlets)	-	250	-
13.2(Construction of fixed Socket Outlets)	-	0	-
13.3(Construction of fixed Socket Outlets)	-	0	-
13.4(Construction of fixed Socket Outlets)	-	0	-
13.5(Construction of fixed Socket Outlets)	-	0	-
13.6(Construction of fixed Socket Outlets)	-	0	-
13.7(Construction of fixed Socket Outlets)	-	0	-
13.8(Construction of fixed Socket Outlets)	-	0	-
13.9(Construction of fixed Socket Outlets)	-	0	-
13.10(Construction of fixed Socket Outlets)	-	0	-
13.11(Construction of fixed Socket Outlets)	-	0	-
13.12(Construction of fixed Socket Outlets)	-	0	-
13.13(Construction of fixed Socket Outlets)	-	0	-
13.14(Construction of fixed Socket Outlets)	-	0	-
13.15(Construction of fixed Socket Outlets)	-	0	-
13.16(Construction of fixed Socket Outlets)	-	0	-
13.17(Construction of fixed Socket Outlets)	-	0	-
13.18(Construction of fixed Socket Outlets)	-	0	-
13.19(Construction of fixed Socket Outlets)	-	0	-
13.2(Construction of fixed Socket Outlets)	-	0	-
13.21(Construction of fixed Socket Outlets)	-	0	-
13.22(Construction of fixed Socket Outlets)	-	0	-
13.23(Construction of fixed Socket Outlets)	-	0	-
14.1(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	250	-
14.2(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	0	-
14.3(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	0	-
14.4(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	0	-
14.5(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	0	-
14.6(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	0	-
14.7(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	0	-
14.8(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	0	-
14.9(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	0	-
14.10(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	0	-
14.11(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	0	-
14.12(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	0	-
14.13(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	0	-
14.14(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	0	-
14.15(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	0	-
14.16(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	0	-
14.17(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	0	-
14.18(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	0	-
14.19(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	0	-
14.20(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	0	-
14.21(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	0	-
14.22(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	0	-
14.23(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	0	-
14.24(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	0	-
14.25(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	0	-
14.26(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	0	-
15(INTERLOCKED SOCKET-OUTLETS)	-	250	-
16.1(Resistance to Ageing)	-	1000	-
16.2(RESISTANCE TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	0	-
16.3(Resistance to Humidity)	-	0	-
17.1(RESISTANCE AND ELECTRIC STRENGTH)	-	600	-
17.2(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	0	-
17.3(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	0	-
18(OPERATION OF EARTHING CONTACTS)	-	450	-
19(TEMPERATURE RISE)	-	450	-
20(Making & Breaking Capacity)	-	350	-
21(Normal Operation)	-	250	-
22.1(Verification of the Maximum Withdrawal Force)	-	250	-
22.2(Verification of Minimum Withdrawal Force)	-	0	-
23.1(FLEXIBLE CABLES AND THEIR CONNECTION)	-	200	-
23.2(FLEXIBLE CABLES AND THEIR CONNECTION)	-	0	-
23.3(FLEXIBLE CABLES AND THEIR CONNECTION)	-	0	-
23.4(FLEXIBLE CABLES AND THEIR CONNECTION)	-	0	-
24.1(MECHANICAL STRENGTH For all kinds of fixed socketoutlets)	-	600	-
24.1(MECHANICAL STRENGTH For portable multiple and combined socket outlets with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	0	-
24.1(MECHANICAL STRENGTH For surface mounting boxes)	-	0	-
24.2(MECHANICAL STRENGTH For portable single socket-outlets: 1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	0	-
24.2(MECHANICAL STRENGTH For portable multiple and combined socket outlets: 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	0	-
24.2(MECHANICAL STRENGTH For plug 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	0	-
24.2(MECHANICAL STRENGTH For plug 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	0	-
24.3(MECHANICAL STRENGTH for fixed socket-outlets with a main part intended to be mounted directly on a surface)	-	0	-
24.4(MECHANICAL STRENGTH For portable single socket-outlets: 1) with enclosures, covers or bodies of thermoplastic or elastomeric material)	-	0	-
24.4(MECHANICAL STRENGTH For portable multiple and combined socket outlets: 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	0	-
24.5(MECHANICAL STRENGTH For portable single socket-outlets: 1) with enclosures, covers or bodies of thermoplastic or elastomeric material)	-	0	-
24.5(MECHANICAL STRENGTH For portable multiple and combined socket outlets: 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	0	-
24.5(MECHANICAL STRENGTH For Plug 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	0	-
24.6(MECHANICAL STRENGTH For screwed glands of accessories having an IP code higher than IP20)	-	0	-
24.7(MECHANICAL STRENGTH For plug pins provided with insulating sleeves)	-	0	-
24.8(MECHANICAL STRENGTH For shuttered socketoutlets)	-	0	-
24.9(MECHANICAL STRENGTH For portable multiple and combined socket outlets (1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	0	-
24.9(MECHANICAL STRENGTH For portable multiple and combined socket outlets (1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	0	-
24.10(MECHANICAL STRENGTH For Plug (1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	0	-
24.10(MECHANICAL STRENGTH For Plug (1) with enclosures, covers or bodies of thermoplastic or elastomeric material)	-	0	-
24.11(MECHANICAL STRENGTH For portable socketoutlets having means for suspension on a wall)	-	0	-
24.12(MECHANICAL STRENGTH For portable socketoutlets having means for suspension on a wall)	-	0	-
24.13(MECHANICAL STRENGTH For portable socketoutlets having means for suspension on a wall)	-	0	-
24.14.1(MECHANICAL STRENGTH For fixed socket-outlets)	-	0	-
24.14.2(MECHANICAL STRENGTH For fixed socket-outlets)	-	0	-
24.14.3(MECHANICAL STRENGTH For plugs and portable socketoutlets)	-	0	-
24.15(MECHANICAL STRENGTH)	-	0	-
24.16(MECHANICAL STRENGTH)	-	0	-
24.16(MECHANICAL STRENGTH For shroud of portable socket-outlets)	-	0	-
25.1(Resistance to heat)	-	200	-
25.2(Resistance to heat)	-	0	-
25.3(Resistance to heat)	-	0	-
25.4(Resistance to heat)	-	0	-
26.1(SCREWS, CURRENTCARRYING PARTS AND CONNECTIONS)	-	350	-
26.2(SCREWS, CURRENTCARRYING PARTS AND CONNECTIONS)	-	0	-
26.3(SCREWS, CURRENTCARRYING PARTS AND CONNECTIONS)	-	0	-
26.4(SCREWS, CURRENTCARRYING PARTS AND CONNECTIONS)	-	0	-
30.4(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Impact Test at Low Temperature)	-	450	-
30.3(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Tests at Low Temperature)	-	0	-
30.2(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Static Damp Heat Test)	-	0	-
30.1(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Pressure Test at High Temperature)	-	0	-
29(Resistance to Rusting)	-	350	-
28.2(Resistance to Tracking)	-	550	-
28.1.1(Glow-Wire Test)	-	0	-
27.3(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	250	-
27.2(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	0	-
27.1(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	0	-
26.7(SCREWS, CURRENTCARRYING PARTS AND CONNECTIONS)	-	0	-
26.6(SCREWS, CURRENTCARRYING PARTS AND CONNECTIONS)	-	0	-
26.5(SCREWS, CURRENTCARRYING PARTS AND CONNECTIONS)	-	0	6A Plug & Socket For BIS only = 8000/- others= 15000/- More than 6A & up to16A Plug & Socket For BIS only = 9800/- others= 18000/ 6/16A Combined Socket For BIS only = 9800/-others= 18000/

-
-

8855

Unique Test House LLP

9134536

IS 18573 (2024)

Cold formed welded carbon steel square and rectangular hollow sections for mechanical, general engineering and decorative purposes ï¿½ Specification

YST-160 TO YST 355/WT/ERW/HFIW, ALL SIZE

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause. 3.0(Types)	-	500	-
Clause.4.0(Carbon)	-	800	-
Clause.4.0(Sulphur)	-	800	-
Clause.4.0(Sulphur)	-	800	-
Clause.4.0(Phosphorus)	-	800	-
Clause.4.0(Silicon)	-	800	-
Clause.4.0(Manganese)	-	800	-
Clause.5.0(Supply of Material)	-	1000	-
Clause.5.0(Supply of Material)	-	1000	-
Clause.6.0(Workmanship)	-	500	-
Clause.7.0(Straightness)	-	1000	-
Clause.8.0(Basis of Calculation)	-	1000	-
Clause.9.0(Length)	-	500	-
Clause.10.0(Dimensions and properties)	-	500	-
Clause.10.0(Dimensions and properties)	-	500	-
Clause.11.0(General)	-	1000	-
Clause.11.0(Outside Dimension)	-	500	-
Clause.11.0(Thickness)	-	500	-
Clause.11.0(Thickness)	-	500	-
Clause.11.0(Concavity and Convexity)	-	1000	-
Clause.11.0(Squareness of Sides)	-	1000	-
Clause.11.0(External Corner Radiius)	-	800	-
Clause.11.0(Straightness and twist)	-	1000	-
Clause.12.0(Dimension Tolerances)	-	500	-
Clause.12.0(Dimension Tolerances)	-	500	-
Clause.13.0(Surface Protection)	-	500	-
Clause.14.0(Testing)	-	500	-
Clause.15.0(Tensile test)	-	2000	-
Clause.15.0(Yield strength)	-	500	-
Clause.15.0(Elognation Percent)	-	500	-
Clause.18.0(Marking)	-	200	-
6(Workmanship)	-	500	-
10(Dimensions and Properties)	-	500	-
11(Measurement of Shape and Size)	-	1000	-
12(Dimensions and Tolerances)	-	500	-
13(Surface Protection)	-	500	-
15(Tensile Test)	-	2000	-
Clause. 3.0(Types)	-	-	-
Clause.4.0(Carbon)	-	-	-
Clause.4.0(Sulphur)	-	-	-
Clause.4.0(Sulphur)	-	-	-
Clause.4.0(Phosphorus)	-	-	-
Clause.4.0(Silicon)	-	-	-
Clause.4.0(Manganese)	-	-	-
Clause.5.0(Supply of Material)	-	-	-
Clause.5.0(Supply of Material)	-	-	-
Clause.6.0(Workmanship)	-	-	-
Clause.7.0(Straightness)	-	-	-
Clause.8.0(Basis of Calculation)	-	-	-
Clause.9.0(Length)	-	-	-
Clause.10.0(Dimensions and properties)	-	-	-
Clause.10.0(Dimensions and properties)	-	-	-
Clause.11.0(General)	-	-	-
Clause.11.0(Outside Dimension)	-	-	-
Clause.11.0(Thickness)	-	-	-
Clause.11.0(Thickness)	-	-	-
Clause.11.0(Concavity and Convexity)	-	-	-
Clause.11.0(Squareness of Sides)	-	-	-
Clause.11.0(External Corner Radiius)	-	-	-
Clause.11.0(Straightness and twist)	-	-	-
Clause.12.0(Dimension Tolerances)	-	-	-
Clause.12.0(Dimension Tolerances)	-	-	-
Clause.13.0(Surface Protection)	-	-	-
Clause.14.0(Testing)	-	-	-
Clause.15.0(Tensile test)	-	-	-
Clause.15.0(Yield strength)	-	-	-
Clause.15.0(Elognation Percent)	-	-	-
Clause.18.0(Marking)	-	-	-
6(Workmanship)	-	-	-
10(Dimensions and Properties)	-	-	-
11(Measurement of Shape and Size)	-	-	-
12(Dimensions and Tolerances)	-	-	-
13(Surface Protection)	-	-	-
15(Tensile Test)	-	-	-

07 Sep, 2028

-
Included w.e.f 24.10.2024

8856

CIPET:CSTS Amritsar

9120034

IS 12650 (2018)

Textiles – Jute bags for packing 50 kg foodgrains – Specification (third revision)

Textiles – Jute bags for packing 50 kg foodgrains – Spe

10326 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4-4.1(MANUFACTURE)	-	500	-
5-5.1-Table 1-Sr. no.i i)(SPECIFIC REQUIREMENTS-Cl. 8.4.2 of IS 9113 Ends/dm Type A 46 + 2 /Type B 76 + 4 / -3)	-	500	-
5-5.1-Table 1-Sr. no.iii)(SPECIFIC REQUIREMENTS-Cl. 8.4.2 of IS 9113 Picks/dm Type A 50 (2 x 25) / Type B 28 + 2)	-	500	-
5-5.1-Table 1-Sr. no.iv)(SPECIFIC REQUIREMENTS-Cl. 8.5.2 of IS 9113 Corrected Mass/bag, g ( See Note 2) For both Type A & Type B 665 + 8.0 / -6.0 percent)	-	500	-
5-5.1-Table 1-Sr. no. i)(SPECIFIC REQUIREMENTS-Dimensions (see Note 1) Cl. 8.3.2 of IS 9113 a) Out side Length , cm 94 (For both type A & Type B) Tolerance + 4 / -0 cm)	-	500	-
5-5.1-Table 1-Sr. no. i)(SPECIFIC REQUIREMENTS-Dimensions (see Note 1) Cl. 8.3.2 of IS 9113 b) Outside width, cm 57 (For both type A & Type B) Tolerance + 4 / -0 cm)	-	500	-
5-5.1-Table 1-Sr. No.v)(SPECIFIC REQUIREMENTS-Cl. 8.6.2 of IS 9113 Average breaking strength of sacking (ravelled-strip method, 10 cm × 20 cm), Min, N (kgf): a ) Warpway- 1570 (160) for both type A & Type B)	-	1300	-
5-5.1-Table 1-Sr. No.v)(SPECIFIC REQUIREMENTS-Cl. 8.6.2 of IS 9113 Average breaking strength of sacking (ravelled-strip method, 10 cm × 20 cm), Min, N (kgf): b ) Weftway- 1420 (145) for both type A & Type B)	-	1300	-
5-5.1-Table 1-Sr. No.vi)(SPECIFIC REQUIREMENTS-Cl. 8.7 of IS 9113 Average side seam strength (5 cm ×20 cm raveled strip), Min, N (kgf): 490 (50) for both type A & Type B)	-	1300	-
5-5.1-Table 1-Sr. No.vii)(SPECIFIC REQUIREMENTS-Cl. 8.2 of IS 9113 Moisture regain, percent, Max (see Note 3) 22 for both type A & Type B)	-	700	-
5-5.1-Table 1-Sr. No.viii)(SPECIFIC REQUIREMENTS-Cl. 8.8 of IS 9113 Oil content on dry de-oiled material, Max 3 for both type A & Type B)	-	1100	-
4-4.3(Manufacture-Safety Stitch )	-	500	-
4-4.4(Manufacture-Hemming at the Mouth )	-	500	-
5-5.2-Table 2-Sr. No.v)(SPECIFIC REQUIREMENTS- Visual Number of joined bags per bundle of 25 bags )	-	500	-
4-4.2(Manufacture-The number of stitches per decimeter shall be 10 ±1.)	-	500	-

06 Jan, 2027

-
-

8857

Atmy Analytical Labs Private Limited (Unit-2), Greater Noida

8176106

IS 302 : Part 2 : Sec 9 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 9 toasters, grills, roasters and similar appliances (First Revision)

All

19500 View breakup
-

Clause No.	Exclusion	Remark
Cl.32(Verification)	-	-
Cl.31(Verification)	-	-
Cl.30(Verification)	-	-
CL.29(Verification)	-	-
Cl.28(Verification)	-	-
Cl.27(Verification)	-	-
Cl.26(Verification)	-	-
Cl.25(Verification)	-	-
Cl.24(Verification)	-	-
Cl.23(Verification)	-	-
Cl.22(Verification)	-	-
Cl.21(Verification)	-	-
Cl.20(Verification)	-	-
Cl.19(Verification)	-	-
Cl. 16(Verification)	-	-
Cl.15.1(Moisture Resistance)	-	-
Cl.14(Verification)	-	-
Cl.13(Verification)	-	-
Cl.11(Verification)	-	-
Cl.10(Verification)	-	-
Cl.8(Verification)	-	-
Cl. 7(Verification)	-	-
Cl. 6(Classification- IS 302-1)	-	-
Cl. 32 IS 302-2-9(Radiation, Toxicity and similar hazards)	-	-
Cl. 31 IS 302-2-9(Resistance To Rusting )	-	-
Cl. 30 IS 302-2-9(Resistance To Heat, Fire And Tracking)	-	-
Cl. 29 IS 302-2-9(Creepage Distances, Clearances And Distances Through Insulation)	-	-
Cl. 28 IS 302-2-9(Screws and Connections)	-	-
Cl. 27 IS 302-2-9(Provision For Earthing )	-	-
Cl. 26 IS 302-2-9(Terminal For External Conductors )	-	-
Cl. 25 IS 302-2-9(Supply Connections and External Flexible Cables and Cords )	-	-
Cl. 24 IS 302-2-9(Components)	-	-
Cl. 23 IS 302-2-9(Internal Wiring)	-	-
Cl. 22 IS 302-2-9(Construction )	-	-
Cl. 21 IS 302-2-9(Mechanical Strength)	-	-
Cl. 20 IS 302-2-9(Stability and mechanical Hazards)	-	-
Cl. 19 IS 302-2-9(Abnormal Operation )	-	-
Cl. 18 IS 302-2-9(Endurance)	-	-
Cl. 17 IS 302-2-9(Overload protection of transformers and associated circuits.)	-	-
Cl. 16 IS 302-2-9(Leakage Current and Electric strength )	-	-
Cl. 15 IS 302-2-9(Moisture Resistance)	-	-
Cl. 14 IS 302-2-9(Transient overvoltage)	-	-
Cl. 13.3 IS 302-2-9(Leakage Current & Electric Strength at Operating Temperature)	-	-
Cl. 11 IS 302-2-9(Heating)	-	-
Cl. 10 IS 302-2-9(Power Input and Current )	-	-
Cl. 9 IS 302-2-9(Starting of motor operated appliances)	-	-
Cl. 8 IS 302-2-9(Protection against access to live parts)	-	-
Cl. 7 IS 302-2-9(Marking and Instruction)	-	-
Cl. 6 IS 302-2-9(Classification- IS 302-1)	-	-
32(Radiation, toxicity and similar hazards)	-	-
31(Resistance to rusting)	-	-
31(Resistance to rusting)	-	-
30.2.4(Resistance to heat and fire)	-	-
30.2(Resistance to heat and fire)	-	-
30.1(Resistance to heat and fire)	-	-
29.3(Clearances, creepage distances and solid insulation)	-	-
29.2(Clearances, creepage distances and solid insulation)	-	-
29.2(Clearances, creepage distances and solid insulation)	-	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	-
28.2 to 28.4(Screws and connections)	-	-
28.1, Table No.-14(Screws and connections)	-	-
27.6(Provision for earthing)	-	-
27.5(Provision for earthing)	-	-
27.1 to 27.4(Provision for earthing)	-	-
26.10 & 26.11(Terminals for external conductors)	-	-
26.9(Terminals for external conductors)	-	-
26.1 to 26.8(Terminals for external conductors)	-	-
25.16 to 25.25(Supply connection and external flexible cords)	-	-
25.15(Supply connection and external flexible cords)	-	-
25.14(Supply connection and external flexible cords)	-	-
25.14(Supply connection and external flexible cords)	-	-
25.9 to 25.13(Supply connection and external flexible cords)	-	-
25.8, Table No.-11(Supply connection and external flexible cords)	-	-
25.5 to 25.7(Supply connection and external flexible cords)	-	-
25.4(Supply connection and external flexible cords)	-	-
25.3(Supply connection and external flexible cords)	-	-
25.2(Supply connection and external flexible cords)	-	-
25.1(Supply connection and external flexible cords)	-	-
24.101(Components)	-	-
24.101(Components)	-	-
24.2 to 24.6(Components)	-	-
24.1(Components)	-	-
23.6 to 23.10(Internal wiring)	-	-
23.5(Internal wiring)	-	-
23.4(Internal wiring)	-	-
23.3(Internal wiring)	-	-
23.1 & 23.2(Internal wiring)	-	-
22.111(Constructions)	-	-
22.111(Constructions)	-	-
22.11o(Constructions)	-	-
22.109(Constructions)	-	-
22.108(Constructions)	-	-
22.101 to 22.107(Constructions)	-	-
22.13 to 22.48(Constructions)	-	-
22.12(Constructions)	-	-
22.11(Constructions)	-	-
22.11(Constructions)	-	-
22.7 to 22.10(Constructions)	-	-
22.6(Constructions)	-	-
22.5(Constructions)	-	-
22.4(Constructions)	-	-
22.3(Constructions)	-	-
22.2(Constructions)	-	-
22.1(Constructions)	-	-
21.101(MECHANICAL STRENGTH)	-	-
21.101(MECHANICAL STRENGTH)	-	-
21.2(MECHANICAL STRENGTH)	-	-
21.1(MECHANICAL STRENGTH)	-	-
20.2(Stability and mechanical hazards)	-	-
20.1(Stability and mechanical hazards)	-	-
19.104(ABNORMAL OPERATION)	-	-
19.103(ABNORMAL OPERATION)	-	-
19.102(ABNORMAL OPERATION)	-	-
19.101(ABNORMAL OPERATION)	-	-
19.1 to 19.13, Table No. - 9(ABNORMAL OPERATION)	-	-
17(Overload protection of transformers and associated circuits)	-	-
16.3(Insulation resistance test)	-	-
16.3(Electric strength test)	-	-
16.1 & 16.2(Leakage current test)	-	-
15.3(Moisture resistance)	-	-
15.3(Moisture resistance)	-	-
15.3(Moisture resistance)	-	-
15.2(Moisture resistance)	-	-
15.2(Moisture resistance)	-	-
15.2(Moisture resistance)	-	-
15.2(Moisture resistance)	-	-
15.1(Moisture resistance)	-	-
14, Table No.- 6 & Table No.-16(Transient over voltages)	-	-
13.3 and Table No.- 4(Electric strength test)	-	-
13.1, 13.2(Leakage current test)	-	-
13.1, 13.2(Leakage current test)	-	-
11.101(Heating)	-	-
11.1 to 11.8, Table No.-3(Heating)	-	-
10.1 & 10.2 -Table No. 1, Table No. 2(Power Input and Current)	-	-
8.1.5(Protection against access to live parts)	-	-
8.1.4(Protection against access to live parts)	-	-
8.1.3(Protection against access to live parts)	-	-
8.1.2(Protection against access to live parts)	-	-
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	-
7.14(Legibility & Durability of Markings test)	-	-
7.1 to 7.13, 7.15, 7.16(Marking)	-	-
32(Radiation, toxicity and similar hazards)	-	-
31(Resistance to rusting)	-	-
31(Resistance to rusting)	-	-
30.2.4(Resistance to heat and fire)	-	-
30.2(Resistance to heat and fire)	-	-
30.1(Resistance to heat and fire)	-	-
29.3(Clearances, creepage distances and solid insulation)	-	-
29.2(Clearances, creepage distances and solid insulation)	-	-
29.2(Clearances, creepage distances and solid insulation)	-	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	-
28.2 to 28.4(Screws and connections)	-	-
28.1, Table No.-14(Screws and connections)	-	-
27.6(Provision for earthing)	-	-
27.5(Provision for earthing)	-	-
27.1 to 27.4(Provision for earthing)	-	-
26.10 & 26.11(Terminals for external conductors)	-	-
26.9(Terminals for external conductors)	-	-
26.1 to 26.8(Terminals for external conductors)	-	-
25.16 to 25.25(Supply connection and external flexible cords)	-	-
25.15(Supply connection and external flexible cords)	-	-
25.14(Supply connection and external flexible cords)	-	-
25.14(Supply connection and external flexible cords)	-	-
25.9 to 25.13(Supply connection and external flexible cords)	-	-
25.8, Table No.-11(Supply connection and external flexible cords)	-	-
25.5 to 25.7(Supply connection and external flexible cords)	-	-
25.4(Supply connection and external flexible cords)	-	-
25.3(Supply connection and external flexible cords)	-	-
25.2(Supply connection and external flexible cords)	-	-
25.1(Supply connection and external flexible cords)	-	-
24.101(Components)	-	-
24.101(Components)	-	-
24.2 to 24.6(Components)	-	-
24.1(Components)	-	-
23.6 to 23.10(Internal wiring)	-	-
23.5(Internal wiring)	-	-
23.4(Internal wiring)	-	-
23.3(Internal wiring)	-	-
23.1 & 23.2(Internal wiring)	-	-
22.111(Constructions)	-	-
22.111(Constructions)	-	-
22.11o(Constructions)	-	-
22.109(Constructions)	-	-
22.108(Constructions)	-	-
22.101 to 22.107(Constructions)	-	-
22.13 to 22.48(Constructions)	-	-
22.12(Constructions)	-	-
22.11(Constructions)	-	-
22.11(Constructions)	-	-
22.7 to 22.10(Constructions)	-	-
22.6(Constructions)	-	-
22.5(Constructions)	-	-
22.4(Constructions)	-	-
22.3(Constructions)	-	-
22.2(Constructions)	-	-
22.1(Constructions)	-	-
21.101(MECHANICAL STRENGTH)	-	-
21.101(MECHANICAL STRENGTH)	-	-
21.2(MECHANICAL STRENGTH)	-	-
21.1(MECHANICAL STRENGTH)	-	-
20.2(Stability and mechanical hazards)	-	-
20.1(Stability and mechanical hazards)	-	-
19.104(ABNORMAL OPERATION)	-	-
19.103(ABNORMAL OPERATION)	-	-
19.102(ABNORMAL OPERATION)	-	-
19.101(ABNORMAL OPERATION)	-	-
19.1 to 19.13, Table No. - 9(ABNORMAL OPERATION)	-	-
17(Overload protection of transformers and associated circuits)	-	-
16.3(Insulation resistance test)	-	-
16.3(Electric strength test)	-	-
16.1 & 16.2(Leakage current test)	-	-
15.3(Moisture resistance)	-	-
15.3(Moisture resistance)	-	-
15.3(Moisture resistance)	-	-
15.2(Moisture resistance)	-	-
15.2(Moisture resistance)	-	-
15.2(Moisture resistance)	-	-
15.2(Moisture resistance)	-	-
15.1(Moisture resistance)	-	-
14, Table No.- 6 & Table No.-16(Transient over voltages)	-	-
13.3 and Table No.- 4(Electric strength test)	-	-
13.1, 13.2(Leakage current test)	-	-
13.1, 13.2(Leakage current test)	-	-
11.101(Heating)	-	-
11.1 to 11.8, Table No.-3(Heating)	-	-
10.1 & 10.2 -Table No. 1, Table No. 2(Power Input and Current)	-	-
8.1.5(Protection against access to live parts)	-	-
8.1.4(Protection against access to live parts)	-	-
8.1.3(Protection against access to live parts)	-	-
8.1.2(Protection against access to live parts)	-	-
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	-
7.14(Legibility & Durability of Markings test)	-	-
7.1 to 7.13, 7.15, 7.16(Marking)	-	-
32(Radiation ,Toxicity and similar hazards)	-	-
31(Resistance to Rusting)	-	-
30(Resistance to Heat & Fire)	-	-
29(Clearances, Creepage Distances & Solid Insulation)	-	-
28(Screws & Connections)	-	-
27(Provision For Earthing)	-	-
26(Terminals For External Conductors)	-	-
25(Supply Connection & External Flexible Cords)	-	-
24(Components)	-	-
23(Internal wiring)	-	-
22(Construction)	-	-
21(Mechanical strength)	-	-
20(Stability & Mechanical Hazards)	-	-
19(Abnormal Operation)	-	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	-
16(Leakage Current and Electric Strength)	-	-
15(Moisture Resistance)	-	-
14(Transient Over Voltage)	-	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	-
11(Temperature Rise/ Heating)	-	-
10(Power Input & Current)	-	-
9(Starting Of Motor Operated Appliances)	-	-
8(Protection against access to live parts)	-	-
32(Radiation ,Toxicity and similar hazards)	-	-
31(Resistance to Rusting)	-	-
30(Resistance to Heat & Fire)	-	-
29(Clearances, Creepage Distances & Solid Insulation)	-	-
28(Screws & Connections)	-	-
27(Provision For Earthing)	-	-
26(Terminals For External Conductors)	-	-
25(Supply Connection & External Flexible Cords)	-	-
24(Components)	-	-
23(Internal wiring)	-	-
22(Construction)	-	-
21(Mechanical strength)	-	-
20(Stability & Mechanical Hazards)	-	-
19(Abnormal Operation)	-	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	-
16(Leakage Current and Electric Strength)	-	-
15(Moisture Resistance)	-	-
14(Transient Over Voltage)	-	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	-
11(Temperature Rise/ Heating)	-	-
10(Power Input & Current)	-	-
9(Starting Of Motor Operated Appliances)	-	-
8(Protection against access to live parts)	-	-

08 Feb, 2027

-
Included w.e.f. 02.12.2024 Exclusion: Cl.19.11.4.1 to 19.11.4.7

8858

CIPET:CSTS Amritsar

9120034

IS 4984 (2016)

Polyethylene pipes for water supply - Specification (Fifth Revision)

High Density Polyethylene Pipes for Potable Water Suppl

50925 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.3(Carbon black)	-	925	Carbon Black Content - Rs. 925
8.3(Carbon black)	-	700	Carbon Black Dispersion- Rs. 700
8.2(Longitudinal Reversion Test)	-	1200	700+500 (Specimen Charges)
8.4( Melt Flow Rate)	-	1100	0
8.5 (Oxidation Induction Time)	-	2200	0
8.6(Overall migration)	-	2200	1700+500 (Specimen Charges)
8.7(Density)	-	700	0
8.8(Tensile Strength for Butt-fusion)	-	1800	1300+500 (Specimen Charges)
8.9 table-6(Elongation at Break)	-	1800	at Yield Strength = 1300+500 (Specimen Charges)
8.10(Slow Crack Growth Rate)	-	6000	5500+500 (Specimen Charges)
Clause 8.3(Carbon Black Dispersion)	-	700	Raw Material -700
7.2(Length)	-	500	0
Clause 8.3(Carbon Black content)	-	925	Raw Material-925
6.2(Colour)	-	0	0
7()	-	500	0
7.4.1.2(Ovality)	-	0	0
8,/8.1/8.1.1 table-5(PERFORMANCE REQUIREMENTS / Hydraulic Characteristics/ Internal Pressure Creep Rupture Test of Pipe)	-	21400	Test Duration (min.) 48 hrs = 1600 Test Duration (min.) 100 hrs= 4000 Test Duration (min.) 165 hrs= 4800 Test Duration (min.) 1000 hrs=11000
8.1.2 table -5(Internal Pressure Creep Rupture Test of Pipe Joints)	-	1600	0
6.2.1(6.1.1 Identification Stripes)	-	500	0
Cl-7.4(Mean Outside Diameter (For upto 50 mm take 8 reading, above 50mm take 6 reading & average will be reported))	-	750	0
5.2(Density)	-	1325	Raw Material 700+625 (Specimen)
5.2(MFI @ 1900C/5.0 Kg)	-	1100	Raw Material
5.2(Volatile matter Content)	-	700	Raw Material
5.2(Polyethylene Resin)	-	925	Raw Material
8.9,T6("Tensile - IS 4984-2016 (Annexure-H)")	-	1800	1300+500 (Specimen)

06 Jan, 2027

-
-

8859

CIPET:CSTS Amritsar

9120034

IS 14887 (2014)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg food grains – Specification (first revision)

Woven Sacks For Packaging Of 50 Kg Food Grains

29630 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2(Tapes – Heat Shrinkage (HDPE) (Cl. 3.2 and IS 6192))	-	1700	Heat Shrinkage ( at 60 °C & 95 °C)
3.2(Tapes – Width and Thickness ( IS 6192/IS 11197))	-	1000	Width = 500 + Thickness= 500
3.2(Tapes – Linear Density (IS 6192/IS 11197))	-	700	-
3.3.1(Bottom seam (IS 10789))	-	500	-
4.1 and 3.4(Mass of bale (Cl. 4.1), Capacity (Cl 3.4))	-	500	-
4.2 and Table 1 ii(Dimensions )	-	500	Dimensions of Fabric ( Inside Length = 250 & Inside Width= 250)
4.2 and Table 1 v(Mass of sack )	-	500	-
4.2 and Table 1 vi(Breaking strength of bottom seam )	-	1300	-
4.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	10180	UV Resistance(192 hrs)* 8 hour at 60°C Light cycle without condensation, 4 hour at 50°C Dark cycle with condensation, Irradiance 0.63 W/m2 UV Resistance (192 hrs)- Rs.10180
4.2 and Table 1 x(Ash content )	-	1200	-
3.1(Material Identification)	-	1050	Raw material(HDPE/PP) Identification
5.2 and Table 1 iii(Ends per dm )	-	500	-
5.2 and Table 1 iv(Picks per dm )	-	500	-
4.2 and Table 1 ii(Dimensions )	-	500	-
4.2 and Table 1 vi(Average breaking strength of fabric )	-	2600	-
4.2 and Table 1 viii(Elongation at break of fabric )	-	0	-
4.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	2600	Breaking Strength of Fabric (Avg.) (1) Lengthwise Direction- Rs.1300 (2) Width wise Direction- Rs.1300
3.2(Tapes – Tenacity (IS 6192/IS 11197))	-	1300	-
3.2(Tapes – Elongation at point of rupture (IS 6192/IS 11197))	-	0	-
3.2(Tapes – Dimensional stability (PP) (IS 11197))	-	1400	Dimensional Stability ( at 100 °C ) Dimensional Stability ( at 125 °C )
3.2(Unlaminated Fabric Mass )	-	500	-
3.2(MFI)	-	1100	-

06 Jan, 2027

-
-

8860

CIPET:CSTS Amritsar

9120034

IS 15532 (2004)

Plastics crates for fruits and vegetables - Specification

Plastics Crates for Fruits and Vegetables

13200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2(Material)	-	1800	Density = 700 + Melt Flow Index=1100
3.3(Shape, Dimensions and Design)	-	500	-
3.4(Mass)	-	500	-
3.5(Appearance and Surface Finish)	-	500	-
3.6(Dimensional Stability)	-	700	-
3.7(Confluence Line Strength)	-	1100	-
3.8.1(Compressive Strength (Resistance to Applied Load))	-	1100	-
3.8.2(Resistance to Drop)	-	1100	-
3.9(Resistance to Environmental Stress Cracking)	-	1200	-
3.10.1(Suspension Test)	-	1100	-
3.10.2(Free-Fall Test)	-	1100	-
3.2(Material)	-	2000	-
3.3(Shape, Dimensions and Design)	-	0	-
3.1(Crates)	-	500	-

06 Jan, 2027

-
-

8861

CIPET:CSTS Amritsar

9120034

IS 15801 (2008)

Polypropylene - Random copolymer pipes for hot and cold water supplies - Specification

20mm To 200mm

123550 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4( Designation)	-	7300	1.Color- Rs. 500 2.Material Identification- Rs.1050 3.Density- Rs.700+625(Specimen) 4.Melt Flow Rate (MFR)- Rs. 1100 6.Carbon Black Content (Optional)-Rs. 925 7.Carbon Black Dispersion (Optional)-Rs. 700 8.Overall Migration-Rs. 1700
Cl 7(Dimensions Of Pipes)	-	500	-
Cl 8(Visual Appearance)	-	500	-
Cl 9.1(Hydraulic Characteristics)	-	18400	i.) Acceptance Test (1 h. /20˚C)- Rs.1000 ii.) Acceptance Test (22 h. /95˚C)- Rs.1600 iii) Type test ( 165 h./95˚C)- Rs. 4800 iv) Type test ( 1000 h./ 95˚C)- Rs. 11000
Cl 9.2(Fusion Compatibility)	-	4800	-
Cl 9.3(Reversion Test )	-	1200	Reversion Test- Rs. 700+500 (Specimen)
Cl 9.4 & Annex B(Impact Strength)	-	1600	Impact Strength- Rs. 1100+500 (Specimen)
Cl 9.5(Density)	-	700	-
Cl 9.6(Melt Flow Rate)	-	1100	-
Cl 9.7(Carbon Black Content & Dispersion)	-	1625	1.Carbon Black Content- Rs. 925 2.Carbon Black Dispersion- Rs. 700
Cl 9.8(Thermal Stability By Hydrostatic Pressure Testing)	-	83825	Thermal stability by Hydrostatic Pressure Testing (8760 h. /110˚C)- Rs. 1700 + 82125(Specimen/Conditioning Charges)
Cl 9.9(Opacity)	-	700	-
5(Colour)	-	500	-

06 Jan, 2027

-
-

8862

CIPET:CSTS Amritsar

9120034

IS 12701 (1996)

Rotational moulded polyethylene water storage tanks - specification (First Revision)

Upto1500 Ltrs and Above 1500ltrs

23100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1.1(Resistance to Deformation)	-	700	-
7.2(Resistance to Impact)	-	1000	-
7.3(Test for Top Load Resistance)	-	900	-
7.4(Tensile Strength)	-	1800	Rs. 1300 + 500 (Specimen)
7.5(Flexural Modulus)	-	1600	Rs. 1100 + 500 (Specimen)
7.6(overall Migration)	-	2500	Rs. 2000 + 500 (Specimen)
9.1(Man-Hole and Hand-Hole Lids)	-	3675	Material Identification-Rs. 1050 Thickness- Rs.500 Visual appearance- Rs. 500 Carbon black content- Rs.925 Carbon black dispersion- Rs.700
9.2.1(Man-Hole and Hand-Hole Lids)	-	1000	-
4.2.3(Carbon Black Content )	-	925	-
5(Types and Features )	-	0	-
4.2.3(Carbon Dispersion Test)	-	700	-
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	3500	Net & Gross Capacity-Rs.500 Overall Diameter-Rs. 500 Overall Height-Rs. 500 Internal dia of man – hole-Rs. 500 Wall thickness upon effective height-Rs. 500 Wall thickness above effective height-Rs. 500 Minimum weight without lid-Rs.500
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	500	Net & Gross Capacity-Rs.500
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	500	Overall Diameter-Rs. 500
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	500	Overall Height-Rs. 500
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	500	Internal dia of man – hole-Rs. 500
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	500	Wall thickness upon effective height-Rs. 500
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	500	Wall thickness above effective height-Rs. 500
5.3(Types and Features )	-	500	Provision of Flat area-Rs. 500
5.4(Wall Thickness above effective height)	-	500	-
5.6(Types and Features )	-	500	-
6.1(Finish)	-	500	-
4.2.1(Density)	-	700	-
4.2.2(MFI)	-	1100	-
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	500	-
7.6(overall Migration)	-	2500	Rs. 2000 + 500 (Specimen)
9.1(Lid Thickness)	-	500	-
9.2(Man-Hole and Hand-Hole Lids)	-	1000	Lid Lock Up=500 Lid Clearance=500

06 Jan, 2027

-
-

8863

CIPET:CSTS Amritsar

9120034

IS 14968 (2015)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packing 50 Kg/25 kg sugar – Specification (first revision)

50 Kg/25 Kg Sugar

26180 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Raw Material)	-	1050	-
4.2(Tapes – Width IS 6192 and IS 11197)	-	500	-
4.2(Tapes – Linear Density )	-	700	-
4.3(Sacks)	-	500	-
4.4(Liner IS 10146 or IS 10910.)	-	1050	i) Material Identification-Rs. 1050
4.5 and Table 1 i(Capacity)	-	500	-
5.2 and Table 1 ii a(Dimensions Inside Length)	-	500	-
5.2 and Table 1 iii(Ends per dm )	-	500	-
5.2 and Table 1 iv(Picks per dm )	-	500	-
5.1 and Table 1 v a(Mass of unlaminated sack IS 1964)	-	500	-
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise IS 1969 (Part 1))	-	1300	-
5.2 and Table 1 vi(Breaking strength of bottom seam IS 9030 )	-	1300	-
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise IS 1969 (Part 1))	-	0	-
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	12780	UV Resistance Test (192hrs)- Rs. 10180 Average Breaking Strength of Fabric (After UV Exposure) a) Lengthwise- Rs.1300 b) Widthwise- Rs. 1300
5.2 and Table 1 x(Ash content )	-	1200	-
4.4(Mass of the loose liner )	-	0	-
4.4(Width of the loose liner)	-	0	-
4.3.1(Bottom Seam)	-	500	-
4.3.1(stitches/dm)	-	0	-
4.3.1(The two rows of stitches shall be separated from each other)	-	0	-
4.3.1( The outer stitch)	-	0	-
4.3.1( The stitching shall be done with double fold over seam to a depth )	-	0	-
4.3.1(Stitches pass through a minimum of six layers of the fabric. )	-	0	-
4.3.2(Mouth)	-	500	-
4.4(Mass of the loose liner )	-	0	-
4.4(Length of the line)	-	0	-
4.4(Bottom seam of the loose liner)	-	0	-
4.4.1(Liner)	-	0	-
5.2 and Table 1 ii b(Dimensions Inside Width)	-	0	-
5.1 and Table 1 v b(Mass of unlaminated sack with liner )	-	500	Mass of Lamination -500 Sack of Lamination-500
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise IS 1969 (Part 1))	-	1300	-
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise IS 1969 (Part 1))	-	0	-

06 Jan, 2027

-
-

8864

CIPET:CSTS Amritsar

9120034

IS 16208 (2015)

Textiles - High density polyethylene (HDPE)/polypropylene (PP) woven sacks for packaging 10 kg, 15 kg, 20 kg, 25 kg and 30 kg foodgrains - Specification

Woven Sacks For Packaging 10Kg, 15Kg, 20Kg, 25Kg 30Kg

21430 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Raw Material)	-	1050	-
4.2(Tapes – Width IS 6192 and IS 11197)	-	500	-
4.2(Tapes – Linear Density )	-	700	-
4.3(Sacks)	-	500	-
4.3.1(Bottom Seam)	-	500	-
4.3.1(The number of stitches/dm)	-	0	-
4.3.2(Mouth)	-	500	-
4.4 and Table 1 i(Capacity)	-	500	-
5.2 and Table 1 ii a(Dimensions Inside Length)	-	250	-
5.2 and Table 1 ii b(Dimensions Inside Width)	-	250	-
5.2 and Table 1 iii(Ends per dm )	-	500	-
5.2 and Table 1 iv(Picks per dm )	-	500	-
5.1 and Table 1 v(Mass of sack )	-	500	-
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise )	-	1300	-
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise )	-	1300	-
5.2 and Table 1 vi(Breaking strength of bottom seam )	-	1300	-
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise)	-	0	-
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise )	-	0	-
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	12750	Average breaking strength and elongation at break Lengthwise-Rs.1300 Widthwise-Rs.1300 UV Resistance Exposure (192hrs)-Rs.10180
5.2 and Table 1 x(Ash content )	-	1200	-

06 Jan, 2027

-
-

8865

Atmy Analytical Labs Pvt. Ltd., Faridabad

8167506

IS 18340 (2023)

Vinyl Sulphone - Specification

22500 View breakup
-

Clause No.	Exclusion	Remark
Cl-3.1(Description)	-	-
Cl-3.2, Table-1 (i)(Assay (by nitrite value), percent by mass (on dry basis), Min)	-	-
Cl-3.2, Table-1 (i)(Assay (by HPLC1)), percent area (on dry basis),Min)	-	-
Cl-3.2, Table-1 (ii)(Hydrolysis value, percent by mass (on 100 percent basis), Min)	-	-
Cl-3.2, Table-1 (iii)(Matter insoluble in sodium carbonate solution percent by mass, Max)	-	-
Cl-3.2, Table-1 (iv)(4-Chloroaniline content, percent by mass (on 100 percent basis), Max)	-	-
Cl-4.2(Marking)	-	-

25 Feb, 2027

-
Included w.e.f. 20.11.2024

8866

Atmy Analytical Labs Private Limited (Unit-2), Greater Noida

8176106

IS 302 : Part 2 : SEC 31 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 31 range hoods

ALL

64900 View breakup
-

Clause No.	Exclusion	Remark
Clause No - 5(GENERAL CONDITIONS FOR THE TESTS)	-	-
Clause No - 5.18(linear and angular dimension)	-	-
Clause No - 6.2(harmfull ingress of water)	-	-
Clause No - 8.1.1("PROTECTION AGAINST ACCESS TO LIVE PART- test probe B")	-	-
Clause No - 8.1.2("PROTECTION AGAINST ACCESS TO LIVE PART - test probe 13")	-	-
Clause No - 8.2(Addition)	-	-
Clause No - 10.1, Table No. -1(power input deviation)	-	-
Clause No - 13.3("LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE")	-	-
Clause No - 13.3,Table No.- 4(voltage for electrical strength)	-	-
Clause No - 14(Impulse test voltage)	-	-
Clause No - 15.1.1(MOISTURE RESISTANCE)	-	-
Clause No -19.7(test is repeated with the capacitor short circuited)	-	-
Clause No -21.1(Mechanical strength)	-	-
Clause No -22.1(construction)	-	-
Clause No -22.11(push force applied)	-	-
Clause No -24.1.2(safety isolating transformer)	-	-
Clause No -24.1.3(for switches)	-	-
Clause No -24.1.4(for automatic control)	-	-
Clause No -24.1.5(for innterconnection couplers)	-	-
Clause No -24.4(plug and socket)	-	-
Clause No -25.8, Table no -11(conductor resistance)	-	-
Clause No -25.5(dimension for pins)	-	-
Clause No -27.6(for circuit board)	-	-
Clause No -29.2(comparative tracking index)	-	-
Clause No -29.3.3(dry heat test)	-	-
Clause No -30.2.1(glow wire test)	-	-
Clause No -30.101("incorporate combustible material")	-	-

08 Feb, 2027

-
Included w.e.f. 02.12.2024 Exclusion: Cl.19.11.4.1 to 19.11.4.7

8867

Atmy Analytical Labs Private Limited (Unit-2), Greater Noida

8176106

IS 302 : Part 2 : Sec 7 (2024)

Safety of Household And Similar Electrical Appliances Part 2 Particular Requirements Section 7: Domestic Electric Clothes Washing Machines

ALL

44900 View breakup
-

Clause No.	Exclusion	Remark
4(GENERAL REQUIREMENT)	-	-
6(CLASSIFICATION)	-	-
7(MARKING AND INSTRUCTIONS)	-	-
8(PROTECTION AGAINST ACCESS TO LIVE PARTS)	-	-
10(POWER INPUT AND CURRENT)	-	-
11(HEATING)	-	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	-
14(TRANSIENT OVERVOLTAGES)	-	-
15(MOISTURE RESISTANCE)	-	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	-
17("OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS ")	-	-
17("OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS ")	-	-
18(ENDURANCE)	-	-
19(ABNORMAL OPERATION)	-	-
20(STABILITY AND MECHANICAL HAZARDS)	-	-
21(MECHANICAL STRENGTH)	-	-
22(CONSTRUCTION)	-	-
23(INTERNAL WIRING)	-	-
24(COMPONENTS)	-	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	-
27(PROVISION FOR EARTHING)	-	-
28(SCREWS AND CONNECTIONS)	-	-
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	-
30(RESISTANCE TO HEAT AND FIRE)	-	-
31(RESISTANCE TO RUSTING)	-	-
19.13(ABNORMAL OPERATION)	-	-
19.101(Abnormal Operation)	-	-
19.102(Abnormal Operation)	-	-

08 Feb, 2027

-
Included w.e.f 12.12.2024 Exclusion : 19.11.4.1 (Electrostatic discharges), 19.11.4.2 (Radiated fields), 19.11.4.3 (Fast transient bursts), 19.11.4.4 (Surge immunity test), 19.11.4.5 (Immunity to conducted discharges), 19.11.4.6 (Class 3 Voltage dips and interruptions), 19.11.4.7 (Harmonics)

8868

Atmy Analytical Labs Private Limited (Unit-2), Greater Noida

8176106

IS 302 : Part 2 : Sec 6 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 6 cooking ranges, hobs, ovens and similar appliances (First Revision)

ALL

24900 View breakup
-

Clause No.	Exclusion	Remark
6.0(Classification)	-	-
7.0(Marking and instructions)	-	-
8.0(Protection against access to live part test)	-	-
9.0(Starting of motor-operated appliances test)	-	-
10.0(Power Input and current test)	-	-
11.0(Heating test)	-	-
13.0(Leakage current and electric strength test)	-	-
14.0(Transient voltages)	-	-
15.0(Moisture Resistance)	-	-
16.0(Leakage current and electric strength test)	-	-
17.0(Overload protection of transformers test)	-	-
18.0(Endurance test)	-	-
19.0(Abnormal Operations)	-	-
20.0(Stability and Mechanical Hazards)	-	-
21.0(Mechanical Strength)	-	-
22.0(Construction verification related tests)	-	-
23.0(Internal wiring)	-	-
24.0(Components)	-	-
25.0(Supply connections and External Flexible Cords)	-	-
26.0(Terminal for External Conductors)	-	-
27.0(Provision for Earthing)	-	-
28.0(Screws and connections)	-	-
29.0(Clearances and Creepage distances and solid insulation)	-	-
30.0(Resistance to heat and fire)	-	-
31.0(Resistance to rusting)	-	-
32.0(Radiation, Toxicity and Similar hazards)	-	-
4(General Requirements)	-	-
5(General condition for the tests)	-	-

08 Feb, 2027

-
Included w.e.f. 02.12.2024 Exclusion: Cl.19.11.4.1 to 19.11.4.7

8869

Atmy Analytical Labs Private Limited (Unit-2), Greater Noida

8176106

IS 302 : Part 2 : Sec 30 (2007)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 30 room heaters (First Revision)

ALL

14900 View breakup
-

Clause No.	Exclusion	Remark
Cl.6 (Classification)	-	-
Cl.6 (Classification)	-	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	-
Cl.7(Marking and Instructions)	-	-
Cl.7(Marking and Instructions)	-	-
Cl.7(Marking and Instructions)	-	-
Cl.7.3(Marking and Instructions)	-	-
Cl.7.3(Marking and Instructions)	-	-
Cl.7.3(Marking and Instructions)	-	-
Cl.7.4(Marking and Instructions)	-	-
Cl.7.5(Marking and Instructions)	-	-
Cl.7.6 & IS:302-1:2008(Marking and Instructions)	-	-
Cl.7.8 of IS :302-1:2008(Marking and Instructions)	-	-
Cl.7.9 of IS :302-1:2008(Marking and Instructions)	-	-
Cl.7.10 of IS :302-1:2008(Marking and Instructions)	-	-
Cl.7.11 of IS :302-1:2008(Marking and Instructions)	-	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	-
Cl.7.12.1 & IS:302-1:2009(Marking and Instructions)	-	-
Cl.7.13 of IS 302-1:2008(Marking and Instructions)	-	-
Cl.7.14 of IS302-1:2008(Marking and Instructions)	-	-
Cl.7.14(Marking and Instructions)	-	-
Cl.7.14(Marking and Instructions)	-	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	-
Cl.7.101(Marking and Instructions)	-	-
Cl.8 & IS:302-1:2008(Protection Against Access to Live Parts)	-	-
Cl.10 & IS:302-1:2008(Power Input and Current)	-	-
Cl.11 & IS:302-1:2008(Heating)	-	-
Cl.11 & IS:302-1:2008(Heating)	-	-
Cl.11 & IS:302-1:2008(Heating)	-	-
Cl.11 & IS:302-1:2008(Heating)	-	-
Cl.11 & IS:302-1:2008(Heating)	-	-
Cl.11 & IS:302-1:2008(Heating)	-	-
Cl.11 & IS:302-1:2008(Heating)	-	-
Cl.11 & IS:302-1:2008(Heating)	-	-
Cl.11 & IS:302-1:2008(Heating)	-	-
Cl.11 & IS:302-1:2008(Heating)	-	-
Cl.11 & IS:302-1:2008(Heating)	-	-
Cl.11 & IS:302-1:2008(Heating)	-	-
Cl.11 & IS:302-1:2008(Heating)	-	-
Cl.11 & IS:302-1:2008(Heating)	-	-
Cl.11 & IS:302-1:2008(Heating)	-	-
Cl.11 & IS:302-1:2008(Heating)	-	-
Cl.11.8(Heating)	-	-
Cl.11.8(Heating)	-	-
Cl.11.8(Heating)	-	-
Cl.13 & IS:302-1:2008(Leakage Current & Electric Strength at operating temp. )	-	-
Cl.13 & IS:302-1:2008(Leakage Current & Electric Strength at operating temp. )	-	-
Cl.14 & IS:302-1:2008(Transient Over Voltages)	-	-
Cl.15 & IS: 302-1:2008(Moisture Resistance )	-	-
Cl.15.3 of IS 302-1:200(Moisture Resistance )	-	-
Cl.16 & IS:302-1:2008(Leakage Current & Electric Strength )	-	-
Cl.16 & IS:302-1:2008(Leakage Current & Electric Strength )	-	-
Cl.17 & IS:302-1:2008(Over load Protection of Transformers and Associated Circuits )	-	-
Cl.18 (Endurance. )	-	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	-
Cl.19.101(Abnormal Operation.)	-	-
Cl.19.102(Abnormal Operation.)	-	-
Cl.19.103(Abnormal Operation.)	-	-
Cl.19.104(Abnormal Operation.)	-	-
Cl.19.105(Abnormal Operation.)	-	-
Cl.19.106(Abnormal Operation.)	-	-
Table 8 of IS 302-1:2008(Abnormal Operation.)	-	-
Cl.19.107(Abnormal Operation.)	-	-
Cl.19.108(Abnormal Operation.)	-	-
Cl.19.109(Abnormal Operation.)	-	-
Cl.19.110(Abnormal Operation.)	-	-
Cl.19.111(Abnormal Operation.)	-	-
Cl.19.112(Abnormal Operation.)	-	-
Cl.19.113(Abnormal Operation.)	-	-
Cl.19.114(Abnormal Operation.)	-	-
Cl.20 & IS:302-1:2008(Stability & Mechanical Hazards)	-	-
Cl.21 & IS:302-1:2008)(Mechanical Strength.)	-	-
Cl.21.2 of IS 302-1:2008(Mechanical Strength.)	-	-
Cl.21.101 (Mechanical Strength.)	-	-
Cl.21.102(Mechanical Strength.)	-	-
Cl.21.103(Mechanical Strength.)	-	-
Cl.22.1 of IS 302-1:2008(Construction)	-	-
Cl.22.5 of IS 302-1:2008(Construction)	-	-
Cl.22.6 of IS 302-1:2008(Construction)	-	-
Cl.22.7 of IS 302-1:2008(Construction)	-	-
Cl.22.8 of IS 302-1:2008(Construction)	-	-
Cl.22.9 of IS 302-1:2008(Construction)	-	-
Cl.22.11(Construction)	-	-
Cl.22.12 of IS 302-1:2008(Construction)	-	-
Cl.22.13 of IS 302-1:2008(Construction)	-	-
Cl.22.14 of IS 302-1:2008(Construction)	-	-
Cl.22.15 of IS 302-1:2008(Construction)	-	-
Cl.22.18 of IS 302-1:2008(Construction)	-	-
Cl.22.20 of IS 302-1:2008(Construction)	-	-
Cl.22.21 of IS 302-1:2008(Construction)	-	-
Cl.23 & IS:302-1:2008(Internal Wiring )	-	-
Cl.23.4 & Cl.29 of 302-1:2008(Internal Wiring )	-	-
Cl.23.5 of 302-1:2008(Internal Wiring )	-	-
Cl.23.7 of 302-1:2008(Internal Wiring )	-	-
C.23.7 of 302-1:2008(Internal Wiring )	-	-
Cl.24.1 of 302-1:2008(Component)	-	-
Cl.24.1 of 302-1:2008(Component)	-	-
Cl.24.1.3 (Component)	-	-
Cl.24.1.3 (Component)	-	-
Cl.24.1.3 (Component)	-	-
Cl.24.1.3 (Component)	-	-
C.24.1.4(Component)	-	-
C.24.2 of 302-1:2008(Component)	-	-
Cl.24.10(Component)	-	-
Cl.25.1 of 302-1:2008(Supply Connection and External Flexible Cords )	-	-
Cl. 25.2 of IS 3021:2008(Supply Connection and External Flexible Cords )	-	-
Cl. 25.3 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	-
Cl. 25.4 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	-
Cl.25.5 of 302-1:2008(Supply Connection and External Flexible Cords )	-	-
Cl.25.6 of 302-1:2008(Supply Connection and External Flexible Cords )	-	-
Cl.25.7.(Supply Connection and External Flexible Cords )	-	-
Cl.25.8(Supply Connection and External Flexible Cords )	-	-
Cl. 25.9(Supply Connection and External Flexible Cords )	-	-
Cl.25.10 of 302-1:2008(Supply Connection and External Flexible Cords )	-	-
Cl. 25.11(Supply Connection and External Flexible Cords )	-	-
Cl. 25.12(Supply Connection and External Flexible Cords )	-	-
Cl. 25.13(Supply Connection and External Flexible Cords )	-	-
Cl.25.14 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	-
Cl.25.17 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	-
Cl.25.18(Supply Connection and External Flexible Cords )	-	-
Cl.25.20(Supply Connection and External Flexible Cords )	-	-
Cl.26.1 of IS 302-1:2008(Terminal for External Conductors )	-	-
Cl.26.10 of IS 302-1:2008(Terminal for External Conductors )	-	-
Cl.26.11 of IS 302-1:2008(Terminal for External Conductors )	-	-
Cl.27.1 of 302-1:2008(Provision for Earthing.)	-	-
Cl.27.5 of 302-1:2008(Provision for Earthing.)	-	-
Cl.28 of 302-1:2008(Screws and Connections.)	-	-
Cl.29 & IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation)	-	-
Cl.29 & IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation)	-	-
Cl.30 & IS:302-1:2008(Resistance to Heat and Fire)	-	-
Cl.30.2.2 of 302-1:2008(Resistance to Heat and Fire)	-	-
Cl.31 & IS:302-1:2008(Resistance to Rusting.)	-	-
Cl.32 & IS:302-1:2008(Radition,Toxicity and similar Hazards.)	-	-
Cl.31 of IS:302-1:2008(Resistance to Rusting.)	-	-
Cl.30.2 of 302-1:2008(Resistance to Heat and Fire : Resistance to fire)	-	-
Cl.30.1 of IS:302-1:2008(Resistance to Heat and Fire: Resistance to heat. )	-	-
Cl.29.2 of IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation : Creepage Distance)	-	-
Cl.29.1 of IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation : Clearance )	-	-
Cl.28 of 302-1:2008(Screws and Connections.)	-	-
Cl.27.5 of 302-1:2008(Provision for Earthing : ECR)	-	-
Cl.27.1 of 302-1:2008(Provision for Earthing )	-	-
Cl.26 of IS 302-1:2008(Terminal for External Conductors )	-	-
Cl.25.20 of 302-1:2008(Supply Connection and External Flexible Cords : Additional insulation )	-	-
Cl.25.18 of 302-1:2008(Supply Connection and External Flexible Cords : Arrangement of cord anchorages )	-	-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords : Cord grip test - displacement)	-	-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords : Cord grip test - strain at terminals )	-	-
Cl. 25.13 of 302-1:2008(Supply Connection and External Flexible Cords : Inlet opening of supply cords )	-	-
Cl. 25.12 of 302-1:2008(Supply Connection and External Flexible Cords : Moulding of cords )	-	-
Cl.25.10 of 302-1:2008(Supply Connection and External Flexible Cords : Colour of earthing wire )	-	-
Cl. 25.9 of 302-1:2008(Supply Connection and External Flexible Cords : Contact with sharp edge )	-	-
Cl.25.8 of 302-1:2008(Supply Connection and External Flexible Cords : Resistance of supply wires )	-	-
Cl.25.7 of IS:302-2-30:2007(Supply Connection and External Flexible Cords : Supply cords material )	-	-
Cl.25.5 of 302-1:2008(Supply Connection and External Flexible Cords : Type of attachments )	-	-
Cl.25.1 of 302-1:2008(Supply Connection and External Flexible Cords : Means of connection )	-	-
Cl.24 of IS:302-2-30:2007(Component)	-	-
Cl.23.7 of 302-1:2008(Internal Wiring : Colour of earting conductor )	-	-
Cl.23 of IS:302-1:2008(Internal Wiring )	-	-
Cl.22.106 of IS:302-2-30:2007(Construction : Checking of thermostats, timers or similar means for visibl glowing radiant heaters)	-	-
Cl.22.106 of IS:302-2-30:2007(Construction : Checking of openings on the underside)	-	-
Cl.22.102 & Cl 22.103 of IS:302-2-30:2007(Construction : Fireguard )	-	-
Cl.22.101 of IS:302-2-30:2007(Construction : Prevention to contact with heating element)	-	-
Cl.22.24 of IS:302-2-30:2007(Construction : test of bare heating element)	-	-
Cl.22.18 of IS 302-1:2008(Construction : Resistance to corrosion )	-	-
Cl.22.15 of IS 302-1:2008(Construction : Storage hooks for flexible cords)	-	-
Cl.22.14 of IS 302-1:2008(Construction : ragged and sharp edges)	-	-
Cl.22.13 of IS 302-1:2008(Construction : Position of handles )	-	-
Cl.22.12 of IS 302-1:2008(Construction : Fixing of Handle, knobs,grips,lever and similer parts )	-	-
Cl.22.11 of IS 302-1:2008(Construction : Fixing of non detachable parts )	-	-
Cl.22.7 of IS:302-2-30:2007(Construction : Pressure test of oil heater )	-	-
Cl.21.101 of IS:302-2-30:2007(Mechanical Strength : fire gaurd deformation test )	-	-
Cl.21.2 of IS 302-1:2008(Mechanical Strength : Pentration by sharp implementation )	-	-
Cl.21.1 of IS:302-1:2008)(Mechanical Strength : Rough handling )	-	-
Cl.20 of IS:302-2-30:2007(Stability of Mechanical Hazards)	-	-
Cl.19.114 of IS:302-2-30:2007(Abnormal Operation : the temp. of the surface of the container for oil heaters )	-	-
Cl.19.112 of IS:302-2-30:2007(Abnormal Operation : Ignition of bleached cotton gauge)	-	-
Cl.19.111 of IS:302-2-30:2007(Abnormal Operation : Ignition of flannelette for Visibly glowing heaters)	-	-
Cl.19.110 of IS:302-2-30:2007(Abnormal Operation : operation against wall for visibly glowing radiant heaters )	-	-
Cl.19.109 of IS:302-2-30:2007(Abnormal Operation : operation against wall for fan heater )	-	-
Cl.19.106 of IS:302-2-30:2007(Abnormal Operation : Locked rotor of fan hetear )	-	-
Cl.19.103 , Cl 19.104 of IS:302-2-30:2007(Abnormal Operation : Operation after Covering by cotton)	-	-
Cl.19 of IS:302-2-30:2007(Abnormal Operation : High Voltage )	-	-
Cl.19 of IS:302-2-30:2007(Abnormal Operation : temp rise of supply cord )	-	-
Cl.19 of IS:302-2-30:2007(Abnormal Operation : Temp rise of test corner )	-	-
Cl.19 of IS:302-1:2008(Abnormal Operation : Emission of molten or poisonous or ignitable gas)	-	-
Cl.16 of IS:302-1:2008(Leakage current and Electric strength (After humidity): Electric Strentgh )	-	-
Cl.16 of IS:302-1:2008(Leakage current and Electric strength (After humidity): Leakage current )	-	-
Cl.15 of IS 302-1:2008(Moisture Resistance )	-	-
Cl.14 of IS:302-1:2008(Transient Over Voltages)	-	-
Cl.13 of IS:302-1:2008(Leakage Current of Electric Strength at operating temp. )	-	-
Cl.13 of IS:302-1:2008(Leakage Current of Electric Strength at operating temp. )	-	-
Cl.11 of IS:302-2:30: 2007(Heating : Room temperature)	-	-
Cl.11.8 of IS:302-2:30: 2007(Heating : For liquid filled radiators the temp. rise of the outer surface of the liquid container)	-	-
Cl.11 of IS:302-2:30: 2007(Heating : Temperature rise in winding)	-	-
Cl.11 of IS:302-2:30: 2007(Heating : Air-outlet grills)	-	-
Cl.11 of IS:302-2:30: 2007(Heating : Surfaces of handles, knobs, grips and similar parts)	-	-
Cl.11 of IS:302-2:30: 2007(Heating : Wooden supports, walls, ceiling and floor of the test corner)	-	-
Cl.11 of IS:302-2:30: 2007(Heating : PVC Insulation )	-	-
Cl.10 of IS:302-1:2008(Power Input and Current)	-	-
Cl.8 of IS:302-1:2008(Protection Against Access to Live Parts)	-	-
Cl.7.101 of IS:302-2:30: 2007(Marking and Instructions : standard mark. )	-	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions : Visibility of marking concerning covering)	-	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions : discernibility from the out side )	-	-
Cl.7.14 of IS:302-2:30: 2007(Marking and Instructions : Height of “Do not cover”)	-	-
Cl.7.14 of IS:302-2:30: 2007(Marking and Instructions : height of symbol)	-	-
Cl.7.14 of IS302-1:2008(Marking and Instructions : Legibility and durability )	-	-
Cl.7.13 of IS 302-1:2008(Marking and Instructions : Languge of instruction and texts )	-	-
Cl.7.11 of IS :302-1:2008(Marking and Instructions : Controls )	-	-
Cl.7.9 of IS :302-1:2008(Marking and Instructions : switches )	-	-
Cl.7.8 of IS :302-1:2008(Marking and Instructions : terminals )	-	-
Cl.7.6 of IS:302-1:2008(Marking and Instructions : Symbols )	-	-
Cl.7.5 of IS:302-1:2008(Marking and Instructions : upper of lower limit of the rated power input )	-	-
Cl 7.1 & Cl.7.6 of IS:302-2:30: 2007(Marking and Instructions : Do not cover )	-	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Country of manufacture )	-	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Symbol for Class-II )	-	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Model or type )	-	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Name , trade-mark or identification mark of the manufacturer )	-	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : rated power input )	-	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Nature of supply )	-	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Rated Voltage )	-	-

08 Feb, 2027

-
Included w.e.f. 02.12.2024 Exclusion: Cl.19.11.4.1 to 19.11.4.7

8870

CIPET:CSTS Amritsar

9120034

IS 16098 Part 2 (2013)

Structured-Wall Plastics Piping Systems for Non-Pressure Drainage and Sewerage Part 2 Pipes and Fittings with Non-Smooth External Surface, Type B

Upto 1200mm (Type B)

105600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.1(PIPE ENDS)	-	0	-
Table -1 Cl. No. 5.1, i)(Base Density)	-	2700	Material Identification-2000 Base Density-700
Table -1 Cl. No. 5.1, ii)(Melt Flow Rate (MFR) at (190ºC, 5kg load))	-	1100	-
Table -1 Cl. No. 5.1, iii)(Thermal Stability (Oxidation Induction Test, OIT) at 200ºC)	-	2200	-
" 5.1 Table-2 ", i)(Resistance to Internal Pressure 165hrs)	-	4800	-
" 5.1 Table-2 ", ii)(Resistance to Internal Pressure 1000hrs)	-	11000	-
6.3.1 & Table-5(Dim (min.) E4 (min) E5 (min.) Socket Length)	-	1000	-
6.3.2(Length of Pipe)	-	0	-
6.3.3(Out Side Diameter)	-	0	-
6.3.5.1.1(Ring Stiffness of Spigot + socket)	-	0	-
"6.3.5.1.5 Table-5 "(Socket thickness Avg. (min.) Avg.)	-	0	-
6.3.5.2(Wall Thickness(e4 min))	-	0	-
6.3.5.2("Construction Height of body wall(ec) Wall Thickness (emin) ")	-	0	-
7.1(Appearance)	-	800	Appearance = 500 Joint (VA) = 300
7.1.1(Color of Finished Pipes)	-	500	-
7.2 Table-6 (i)(Resistance to Heating oven test at (110±2ºC for 30 minute))	-	1100	-
8.1.1 Table-10 (i)(Ring Stiffness)	-	1100	-
8.1.1 Table-10 (ii)(Impact Strength at (0±1 ºC))	-	1100	-
8.1.1, 8.1.2 Table-10 (iii)(Ring flexibility 30% of dem)	-	1100	-
8.1.1 Table-10 (iv)(Creep ratio)	-	26300	Creep ratio- Rs. 1100 + 25200 (Specimen)
9 Table-12 (i)(Tightness of elastomeric ring seal Joint)	-	5500	-
9 Table 12 (ii)(Water tightness)	-	1000	-
9 Table- 12 (iii)(Resistance to combined temperature cycling and external loading)	-	43800	Resistance to combined temperature cycling and external loading= 3900 Resistance to Hydrostatic pressure= 4800

06 Jan, 2027

-
-

8871

CIPET:CSTS Amritsar

9120034

IS 2508 (2016)

Polyethylene films and sheets - Specification (Third Revision)

Black Film Type-I, II, III and IV

25775 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.1(Appearance)	-	500	-
5.1.2(Film Form)	-	0	-
5.1.3(Odour)	-	0	-
5.1.4(Density, Cl.5 of IS 13360(Part-3/Section-1))	-	2025	700 + (Black Compound) 700+625
5.1.5(Melt Flow Index. Cl 6, 7 of IS 13360(Part-4/Section-1))	-	2200	1100 + (Black Compound) 1100
5.1.6a(Carbon Black Content, Annex-A)	-	925	-
5.1.6b(Ash Content, Annex-A)	-	1200	-
5.1.6c(Carbon Black Dispersion, Cl.16 of IS 2530)	-	700	-
5.2.2(Tolerance on Thickness, Annex-A)	-	1000	500(Thickness) +500(Width)
6.1, Table 1(Tensile strength at break. A) Machine Direction. IS 13360 (Part 5/Sec 1))	-	3100	2600 + 500 (Specimen)
6.1, Table 1(Tensile strength at break. B) Transverse Direction. IS 13360 (Part 5/Sec 3))	-	2600	-
6.1, Table 1(Ageing test at (70-1)c for 7 days , cl 4 IS 7016 )	-	4300	-
6.1, Table 1(Elongation at break ,A) Machine direction .IS 13360(Part-5/sec-1) )	-	0	-
6.1, Table 1(Elongation at break ,B) Cross-machine direction..IS 13360(Part-5/sec-3) )	-	0	-
6.1, Table 1(Dartimpact strength Method B of IS 13360 (Part-5/sec-6) )	-	1000	-
6.1, Table 1(Tear resistence. A) Machine direction Annex B)	-	1250	750 + 500 (Specimen)
6.1, Table 1(Tear resistence. B) Transverse direction )	-	750	-
8.1, Table 3(Puncture resistance , Annex C)	-	1100	-
5.2.1.2(Nominal width)	-	500	Width Tolerance
5.2.1.1(Nominal Thickness)	-	500	Thickness Tolerance
Clause 5.2.3(Tolerance on Width)	-	500	-
7.1. Table 2(Ageing test at (70-1)c for 7 days , cl 4 IS 7016 )	-	0	-
Cl.5.1.6(a)(Carbon Black Content)	-	925	-
Cl.5.1.6(c)(Dispersion of Carbon Black)	-	700	--

06 Jan, 2027

-
-

8872

CIPET:CSTS Amritsar

9120034

IS 11652 (2017)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg cement – Specification (third revision)

Woven Sacks For Packaging Of 50 Kg Cement

28880 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Raw Material )	-	1050	-
4.2 (Fabric)	-	3850	(i) Fabric (tape width) -Rs. 500 (ii) Sacks (Visual Appearance)-Rs. 500 (iii) Seam (Dimension)-Rs. 500 (iv) Identification (Stitching Material)-Rs. 1050 (v) Stitching material Breaking Load-Rs. 1300
4.4(Seam)	-	1800	1300+500
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	500	-
4.7(Valve for Filling of Sacks)	-	500	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	500	-
Fig. 1- Table 1- Sr. no. ii (Ends per dm - Annex B 40 ± 2 )	-	500	-
Fig. 1- Table 1-Sr. no. iii (Picks per dm-Annex B 40 ± 2 )	-	500	-
5/5.1(The mass of bale of sacks (excluding packing materials) shall be within ± 3 percent of the mass calculated by multiplying the number of sacks with the mass of sack specified in Table 1.)	-	500	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	2600	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	2600	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	1300	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	1300	-
5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure)	-	1100	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	1200	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	1200	-
5/5.6 (UV Resistance, )	-	10180	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25)	-	0	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25)	-	0	-

06 Jan, 2027

-
-

8873

Bharat Test House Pvt Ltd 781 Sonipat Haryana

9137826

IS 1287 (1993)

Electric toasters - Specification (Third Revision)

Electric Toasters

37000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Rating)	-	50	5% discount for BIS
7(Classification)	-	50	5% discount for BIS
8(Marking)	-	50	5% discount for BIS
9(Safety Requirements)	-	200	5% discount for BIS
11(Overall dimension)	-	200	5% discount for BIS
12(Length of the Flexible cord)	-	200	5% discount for BIS
13(Mass)	-	500	5% discount for BIS
14(Number and Dimensions of the toasing chambers, toasting surfaces and heating elements)	-	1500	5% discount for BIS
15(Force necessary to operate the bread carriage)	-	1250	5% discount for BIS
16(Preparation of bread for toasters)	-	1250	5% discount for BIS
17(Browning control setting)	-	1500	5% discount for BIS
18(Toasting)	-	2500	5% discount for BIS
19(Toasting time)	-	1550	5% discount for BIS
20(Evenness of Browning)	-	1500	5% discount for BIS
21(Browning control characteristic)	-	1500	5% discount for BIS
22(Endurance)	-	7000	5% discount for BIS
23(Finish)	-	250	5% discount for BIS
24(Functional Provision)	-	100	5% discount for BIS
Cl-9 (Cl-8 of IS 302-2-9)(PROTECTION AGAINST ACCESS TO LIVE PARTS)	-	200	5% discount for BIS
Cl-9 (Cl-10 of IS 302-2-9)(POWER INPUT AND CURRENT)	-	200	5% discount for BIS
Cl-9 (Cl-11 of IS 302-2-9)(HEATING)	-	200	5% discount for BIS
Cl-9 (Cl-13 of IS 302-2-9)(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	200	5% discount for BIS
Cl-9 (Cl-14 of IS 302-2-9)(TRANSIENT OVERVOLTAGES)	-	200	5% discount for BIS
Cl-9 (Cl-15 of IS 302-2-9)(MOISTURE RESISTANCE)	-	3250	5% discount for BIS
Cl-9 (Cl-16 of IS 302-2-9)(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	200	5% discount for BIS
Cl-9 (Cl-17 of IS 302-2-9)(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	200	5% discount for BIS
Cl-9 (Cl-19 of IS 302-2-9)(ABNORMAL OPERATION)	-	1500	5% discount for BIS
Cl-9 (Cl-20 of IS 302-2-9)(STABILITY AND MECHANICAL HAZARDS)	-	200	5% discount for BIS
Cl-9 (Cl-21 of IS 302-2-9)(MECHANICAL STRENGTH)	-	200	5% discount for BIS
Cl-9 (Cl-22 of IS 302-2-9)(CONSTRUCTION)	-	700	5% discount for BIS
Cl-9 (Cl-23 of IS 302-2-9)(INTERNAL WIRING)	-	750	5% discount for BIS
Cl-9 (Cl-25 of IS 302-2-9)(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	1000	5% discount for BIS
Cl-9 (Cl-26 of IS 302-2-9)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	600	5% discount for BIS
Cl-9 (Cl-27 of IS 302-2-9)(PROVISION FOR EARTHING)	-	750	5% discount for BIS
Cl-9 (Cl-28 of IS 302-2-9)(SCREWS AND CONNECTIONS)	-	750	5% discount for BIS
Cl-9 (Cl-29 of IS 302-2-9)(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	1250	5% discount for BIS
Cl-9 (Cl-30 of IS 302-2-9)(RESISTANCE TO HEAT AND FIRE)	-	1500	5% discount for BIS
Cl-9 (Cl-31 of IS 302-2-9)(RESISTANCE TO RUSTING)	-	750	5% discount for BIS
Cl-9 (Cl-32 of IS 302-2-9)(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	1250	5% discount for BIS

31 Dec, 2026

-
REVISED TESTING CHARGES W.E.F. 5-7-2021. Included w.e.f 29-07-2020. Excluding EMI/EMC tests (Electrostatic discharges, radiant fields, fast transient bursts, voltage surges, injected current, voltage dip and interruption, mains signals) (Cl.19.11.4.1 to 19.11.4.7), Components (Capacitors for radio interference suppression, isolating transformer, coupler) (Cl.24.1.1, 24.1.2, 24.1.5)

8874

Bharat Test House Pvt Ltd 781 Sonipat Haryana

9137826

IS 2418 : Part 1 (2018)

Tubular fluorescent lamps for general lighting service: Part 1 safety requirements (Second Revision)

29500 View breakup
18W & 20W-Rs.19,000/- (2000 hours), 18W & 20W-Rs.27,500/- (3500 hours), 36W & 40W-Rs.21,500/- (2000 hours), 36W & 40W-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause No. 4.2 (Marking.)	-	500	5% discount for BIS
Clause No. 4.3(Mechanical requirement for caps)	-	1500	5% discount for BIS
Clause No. 4.4(Insulation Resistance Measurement)	-	2500	5% discount for BIS
Clause No. 4.5(Electric strength )	-	4000	5% discount for BIS
Clause No. 4.6(Parts which can become accidentally live)	-	1250	5% discount for BIS
Clause No. 4.7(Resistance to heat & fire)	-	4250	5% discount for BIS
Clause No. 4.8(Creepage distance for caps)	-	1500	5% discount for BIS
Clause No. 4.9(Lamp cap temperature rise)	-	3500	5% discount for BIS
Clause No. 4.10(Lamp minimum overall length)	-	1500	5% discount for BIS
4.11(Information for Luminaire Design)	-	4500	5% discount for BIS
4.12(Information for Ballast Design)	-	4500	5% discount for BIS
3.9(Routine test)	-	200	5% discount for BIS
7.1.3(Routine Tests)	-	50	5% discount for BIS

31 Dec, 2026

-
REVISED TESTING CHARGES W.E.F. 5-7-2021.

8875

Bharat Test House Pvt Ltd 781 Sonipat Haryana

9137826

IS 369 (2019)

Household electric direct - Acting room heaters - Performance requirements (Fourth Revision)

Household electric direct - Acting room heaters

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.6 of IS 302-2-30:2007(Classification)	-	50	5% discount for BIS
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	200	5% discount for BIS
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	200	5% discount for BIS
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	200	5% discount for BIS
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	200	5% discount for BIS
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	200	5% discount for BIS
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	200	5% discount for BIS
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	200	5% discount for BIS
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	200	5% discount for BIS
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	200	5% discount for BIS
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	200	5% discount for BIS
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	200	5% discount for BIS
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	200	5% discount for BIS
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	200	5% discount for BIS
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	200	5% discount for BIS
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	200	5% discount for BIS
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	200	5% discount for BIS
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	200	5% discount for BIS
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	200	5% discount for BIS
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	200	5% discount for BIS
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	200	5% discount for BIS
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	200	5% discount for BIS
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	200	5% discount for BIS
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	200	5% discount for BIS
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	200	5% discount for BIS
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	200	5% discount for BIS
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	200	5% discount for BIS
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	200	5% discount for BIS
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	200	5% discount for BIS
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	200	5% discount for BIS
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	200	5% discount for BIS
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	200	5% discount for BIS
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	200	5% discount for BIS
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	200	5% discount for BIS
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	200	5% discount for BIS
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	200	5% discount for BIS
Cl.8 of IS 302-2-30:2007 &IS:302-1:2008(Protection Against Access to Live Parts)	-	200	5% discount for BIS
Cl.10 of IS 302-2-30:2007 &IS:302-1:2008(Power Input and Current)	-	200	5% discount for BIS
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008(Heating)	-	200	5% discount for BIS
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008(Heating)	-	200	5% discount for BIS
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008(Heating)	-	200	5% discount for BIS
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008(Heating)	-	200	5% discount for BIS
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008(Heating)	-	200	5% discount for BIS
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008(Heating)	-	200	5% discount for BIS
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008(Heating)	-	200	5% discount for BIS
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008(Heating)	-	200	5% discount for BIS
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008(Heating)	-	200	5% discount for BIS
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008(Heating)	-	200	5% discount for BIS
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008(Heating)	-	200	5% discount for BIS
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008(Heating)	-	200	5% discount for BIS
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008(Heating)	-	200	5% discount for BIS
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008(Heating)	-	200	5% discount for BIS
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008(Heating)	-	200	5% discount for BIS
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008(Heating)	-	200	5% discount for BIS
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008(Heating)	-	200	5% discount for BIS
Cl.13 of IS 302-2-30:2007 &IS:302-1:2008(Leakage Current & Electric Strength at operating temp)	-	200	5% discount for BIS
Cl.14 of IS 302-2-30:2007 &IS:302-1:2008(Transient Over Voltages)	-	200	5% discount for BIS
Cl.15 of IS 302-2-30:2007 &IS:302-1:2008(Moisture Resistance)	-	200	5% discount for BIS
Cl.16 of IS 302-2-30:2007 &IS:302-1:2008(Leakage Current & Electric Strength )	-	200	5% discount for BIS
Cl.18 of IS 302-2-30:2007 (Endurance)	-	200	5% discount for BIS
Cl.19 of IS 302-2-30:2007 &IS:302-1:2008(Abnormal Operation)	-	200	5% discount for BIS
Cl.20 of IS 302-2-30:2007 &IS:302-1:2008(Stability & Mechanical Hazards)	-	200	5% discount for BIS
Cl.21 of IS 302-2-30:2007 &IS:302-1:2008(Mechanical Strength)	-	200	5% discount for BIS
Cl.22 of IS 302-2-30:2007 &IS:302-1:2008(Construction)	-	200	5% discount for BIS
Cl.23 of IS 302-2-30:2007 &IS:302-1:2008(Internal Wiring)	-	200	5% discount for BIS
Cl.24 of IS 302-2-30:2007 &IS:302-1:2008(Component)	-	200	5% discount for BIS
Cl.25 of IS 302-2-30:2007 &IS:302-1:2008(Supply Connection and External Flexible Cords )	-	200	5% discount for BIS
Cl.26 of IS 302-2-30:2007 &IS:302-1:2008(Terminal for External Conductors)	-	200	5% discount for BIS
Cl.27 of IS 302-2-30:2007 &IS:302-1:2008(Provision for Earthing)	-	200	5% discount for BIS
Cl.28 of IS 302-2-30:2007 &IS:302-1:2008(Screws and Connections)	-	200	5% discount for BIS
Cl.29 of IS 302-2-30:2007 &IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation.)	-	200	5% discount for BIS
Cl.30 of IS 302-2-30:2007 &IS:302-1:2008(Resistance to Heat and Fire.)	-	200	5% discount for BIS
Cl.31 of IS 302-2-30:2007 &IS:302-1:2008(Resistance to Rusting)	-	200	5% discount for BIS
Cl.7 of IS 369:2019(Dimensions)	-	750	5% discount for BIS
Cl.8 of IS 369:2019(Temperature rises of air-outlet grilles and external surfaces)	-	1500	5% discount for BIS
Cl.9 of IS 369:2019(Temperature rises of surfaces surrounding the heater)	-	1500	5% discount for BIS
Cl.10 of IS 369:2019(Warming-up time of the heater)	-	700	5% discount for BIS
Cl.11 of IS 369:2019(Stability of room temperature)	-	0	-
Cl.12 of IS 369:2019(Set-back)	-	0	-
Cl.13 of IS 369:2019(Frost protection temperature)	-	0	-
Cl.14 of IS 369:2019(Inrush current)	-	1000	5% discount for BIS
Cl.15 of IS 369:2019(Effect of radiant heat)	-	1100	5% discount for BIS
Cl.16 of IS 369:2019(Usable power)	-	0	-

31 Dec, 2026

-
-

8876

Bharat Test House Pvt Ltd 781 Sonipat Haryana

9137826

IS 302 : Part 2 : Sec 202 (1992)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 202 electric stoves

Electric Stoves

19000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification- IS 302-1 )	-	50	5% discount for BIS
7.1(Marking- IS 302-1)	-	50	5% discount for BIS
7.3(Marking- IS 302-1)	-	50	5% discount for BIS
7.4(Marking- IS 302-1)	-	50	5% discount for BIS
7.6(Marking- IS 302-1)	-	50	5% discount for BIS
7.11(Marking- IS 302-1)	-	50	5% discount for BIS
7.12(Marking- IS 302-1)	-	50	5% discount for BIS
7.14(Marking- IS 302-1)	-	50	5% discount for BIS
7.15(Marking- IS 302-1)	-	50	5% discount for BIS
7.101(Marking)	-	50	5% discount for BIS
8( Protection Against Electric Shock, IS 302-1)	-	200	5% discount for BIS
10(Power Input and Current, IS 302-1)	-	700	5% discount for BIS
11(Heating, IS 302-1)	-	1100	5% discount for BIS
12(Operation under overload conditions of appliances with heating elements, IS 302-2-202: 1992)	-	500	5% discount for BIS
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1000	5% discount for BIS
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	1000	5% discount for BIS
15.1(Moisture Resistance, IS 302-1)	-	2500	5% discount for BIS
15.3(Moisture Resistance, IS 302-1)	-	2500	5% discount for BIS
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1000	5% discount for BIS
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	1000	5% discount for BIS
19.2(Abnormal Operation, IS 302-1)	-	2000	5% discount for BIS
19.2(Abnormal Operation, IS 302-1)	-	2000	5% discount for BIS
19.3(Abnormal Operation, IS 302-1)	-	2000	5% discount for BIS
19.3(Abnormal Operation, IS 302-1)	-	2000	5% discount for BIS
20.1(Stability & Mechanical Hazards, IS 302-1)	-	400	5% discount for BIS
21.1(Mechanical Strength, IS 302-1 & IS 302-2-202)	-	500	5% discount for BIS
22(Construction, IS 302-1)	-	1500	5% discount for BIS
22.101(Construction)	-	1500	5% discount for BIS
22.102(Construction)	-	1500	5% discount for BIS
22.103(Construction)	-	1500	5% discount for BIS
22.104(Construction)	-	1500	5% discount for BIS
22.105(Construction)	-	1500	5% discount for BIS
22.105.1(Construction)	-	1500	5% discount for BIS
22.105.2(Construction)	-	1500	5% discount for BIS
22.106(Construction)	-	1500	5% discount for BIS
22.107(Construction)	-	1500	5% discount for BIS
11.107.1(Construction)	-	1500	5% discount for BIS
23.1(Internal Wiring, IS 302-1)	-	500	5% discount for BIS
23.2(Internal Wiring, IS 302-1)	-	500	5% discount for BIS
23.8(Internal Wiring, IS 302-1)	-	500	5% discount for BIS
23.9(Internal Wiring, IS 302-1)	-	500	5% discount for BIS
23.10(Internal Wiring, IS 302-1)	-	500	5% discount for BIS
24.1(Components, IS 302-1)	-	200	5% discount for BIS
24.101(Components)	-	200	5% discount for BIS
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	500	5% discount for BIS
25.4(Supply Connection and External Flexible Cords)	-	500	5% discount for BIS
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	500	5% discount for BIS
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	500	5% discount for BIS
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	500	5% discount for BIS
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	500	5% discount for BIS
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	500	5% discount for BIS
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	500	5% discount for BIS
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	500	5% discount for BIS
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	500	5% discount for BIS
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	500	5% discount for BIS
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	500	5% discount for BIS
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	500	5% discount for BIS
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	500	5% discount for BIS
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	500	5% discount for BIS
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	500	5% discount for BIS
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	500	5% discount for BIS
26(Terminals for External Conductors, IS 302-1)	-	500	5% discount for BIS
27.1(Provision for Earthing, IS 302-1)	-	500	5% discount for BIS
27.2(Provision for Earthing, IS 302-1)	-	500	5% discount for BIS
27.3(Provision for Earthing, IS 302-1)	-	500	5% discount for BIS
27.4(Provision for Earthing, IS 302-1)	-	500	5% discount for BIS
27.5(Provision for Earthing, IS 302-1)	-	500	5% discount for BIS
28(Screws & Connections, IS 302-1)	-	500	5% discount for BIS
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	1000	5% discount for BIS
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	1000	5% discount for BIS
30.1(Resistance to Heat, Fire & Tracking, IS 302-1)	-	600	5% discount for BIS
30.2(Resistance to Heat, Fire & Tracking, IS 302-1)	-	600	5% discount for BIS
31(Resistance of Rusting, IS 302-1)	-	2000	5% discount for BIS

31 Dec, 2026

-
Exclusion (Cl.19.11.4.1 to 19.11.4.7)EMI/EMC

8877

Bharat Test House Pvt Ltd 781 Sonipat Haryana

9137826

IS 1293 (2019)

Plugs and socket - Outlets of rated Voltage up to and including 250 Volts and rated current up to and including 16 amperes - Specification (Third Revision)

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Ratings)	-	50	5% discount for BIS
7.1.1(Accessories Classification)	-	50	5% discount for BIS
7.1.2(Accessories Classification)	-	50	5% discount for BIS
7.1.3(Accessories Classification)	-	50	5% discount for BIS
7.1.4(Accessories Classification)	-	50	5% discount for BIS
7.1.5(Accessories Classification)	-	50	5% discount for BIS
7.2.1(Socket-Outlets Classification)	-	50	5% discount for BIS
7.2.2(Socket-Outlets Classification)	-	50	5% discount for BIS
7.2.3(Socket-Outlets Classification)	-	50	5% discount for BIS
7.2.4(Socket-Outlets Classification)	-	50	5% discount for BIS
7.3(Plug Classification)	-	50	5% discount for BIS
8.1(MARKING)	-	50	5% discount for BIS
8.8(MARKING)	-	50	5% discount for BIS
8.9(MARKING)	-	50	5% discount for BIS
9.1(CHECKING OF DIMENSIONS)	-	100	5% discount for BIS
9.2(CHECKING OF DIMENSIONS)	-	100	5% discount for BIS
10.1(PROTECTION AGAINST ELECTRIC SHOCK)	-	100	5% discount for BIS
10.3(PROTECTION AGAINST ELECTRIC SHOCK)	-	100	5% discount for BIS
10.4(PROTECTION AGAINST ELECTRIC SHOCK)	-	100	5% discount for BIS
10.5(PROTECTION AGAINST ELECTRIC SHOCK)	-	100	5% discount for BIS
10.6(PROTECTION AGAINST ELECTRIC SHOCK)	-	100	5% discount for BIS
10.7(PROTECTION AGAINST ELECTRIC SHOCK)	-	100	5% discount for BIS
11.1(PROVISIONS FOR EARTHING)	-	100	5% discount for BIS
11.2(PROVISIONS FOR EARTHING)	-	100	5% discount for BIS
11.3(PROVISIONS FOR EARTHING)	-	100	5% discount for BIS
11.4(PROVISIONS FOR EARTHING)	-	100	5% discount for BIS
11.5(PROVISIONS FOR EARTHING)	-	100	5% discount for BIS
11.6(PROVISIONS FOR EARTHING)	-	100	5% discount for BIS
12.1.1(TERMINALS)	-	200	5% discount for BIS
12.1.2(TERMINALS)	-	200	5% discount for BIS
12.2.1(TERMINALS)	-	200	5% discount for BIS
12.2.2(TERMINALS)	-	200	5% discount for BIS
12.2.3(TERMINALS)	-	200	5% discount for BIS
12.2.4(TERMINALS)	-	200	5% discount for BIS
12.2.5(TERMINALS)	-	200	5% discount for BIS
12.2.6(TERMINALS)	-	200	5% discount for BIS
12.2.7(TERMINALS)	-	200	5% discount for BIS
12.2.8(TERMINALS)	-	200	5% discount for BIS
12.2.9(TERMINALS)	-	200	5% discount for BIS
12.2.10(TERMINALS)	-	200	5% discount for BIS
12.2.11(TERMINALS)	-	200	5% discount for BIS
12.3.1(TERMINALS)	-	200	5% discount for BIS
12.3.2(TERMINALS)	-	200	5% discount for BIS
12.3.3(TERMINALS)	-	200	5% discount for BIS
12.3.4(TERMINALS)	-	200	5% discount for BIS
12.3.5(TERMINALS)	-	200	5% discount for BIS
12.3.6(TERMINALS)	-	200	5% discount for BIS
12.3.7(TERMINALS)	-	200	5% discount for BIS
12.3.8(TERMINALS)	-	200	5% discount for BIS
12.3.9(TERMINALS)	-	200	5% discount for BIS
12.3.10(TERMINALS)	-	200	5% discount for BIS
12.3.11(TERMINALS)	-	200	5% discount for BIS
12.3.12(TERMINALS)	-	200	5% discount for BIS
13.1(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	200	5% discount for BIS
13.2(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	200	5% discount for BIS
13.3(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	200	5% discount for BIS
13.4(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	200	5% discount for BIS
13.5(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	200	5% discount for BIS
13.6(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	200	5% discount for BIS
13.7(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	200	5% discount for BIS
13.8(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	200	5% discount for BIS
13.9(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	200	5% discount for BIS
13.11(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	200	5% discount for BIS
13.12(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	200	5% discount for BIS
13.13(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	200	5% discount for BIS
13.14(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	200	5% discount for BIS
13.15(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	200	5% discount for BIS
13.16(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	200	5% discount for BIS
13.17(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	200	5% discount for BIS
13.18(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	200	5% discount for BIS
13.19(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	200	5% discount for BIS
13.21(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	200	5% discount for BIS
13.22(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	200	5% discount for BIS
13.23(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	200	5% discount for BIS
14.1(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	200	5% discount for BIS
14.2(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	200	5% discount for BIS
14.3(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	200	5% discount for BIS
14.4(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	200	5% discount for BIS
14.5(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	200	5% discount for BIS
14.6(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	200	5% discount for BIS
14.7(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	200	5% discount for BIS
14.8(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	200	5% discount for BIS
14.9(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	200	5% discount for BIS
14.11(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	200	5% discount for BIS
14.12(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	200	5% discount for BIS
14.13(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	200	5% discount for BIS
14.14(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	200	5% discount for BIS
14.15(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	200	5% discount for BIS
14.16(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	200	5% discount for BIS
14.17(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	200	5% discount for BIS
14.18(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	200	5% discount for BIS
14.19(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	200	5% discount for BIS
14.21(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	200	5% discount for BIS
14.22(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	200	5% discount for BIS
14.23(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	200	5% discount for BIS
14.23.1(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	200	5% discount for BIS
14.23.2(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	200	5% discount for BIS
14.24(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	200	5% discount for BIS
14.25(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	200	5% discount for BIS
14.26(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	200	5% discount for BIS
15(INTERLOCKED SOCKET-OUTLETS)	-	100	5% discount for BIS
16.1(RESISTANCE TO AGEING,)	-	500	5% discount for BIS
16.2(RESISTANCE TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	500	5% discount for BIS
16.3(Resistance to Humidity)	-	500	5% discount for BIS
17.1(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	400	5% discount for BIS
17.2(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	400	5% discount for BIS
17.3(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	400	5% discount for BIS
18(OPERATION OF EARTHING CONTACTS)	-	200	5% discount for BIS
19(TEMPERATURE RISE)	-	800	5% discount for BIS
20(BREAKING CAPACITY)	-	1000	5% discount for BIS
21(NORMAL OPERATION)	-	1000	5% discount for BIS
22.1(Verification of the Maximum Withdrawal Force)	-	300	5% discount for BIS
22.2(Verification of Minimum Withdrawal Force)	-	300	5% discount for BIS
23.1(FLEXIBLE CABLES AND THEIR CONNECTION)	-	600	5% discount for BIS
23.3(FLEXIBLE CABLES AND THEIR CONNECTION)	-	600	5% discount for BIS
23.4(FLEXIBLE CABLES AND THEIR CONNECTION)	-	600	5% discount for BIS
24.1(MECHANICAL STRENGTH For all kinds of fixed socket-outlets )	-	600	5% discount for BIS
24.1(MECHANICAL STRENGTH For portable multiple and combined socket outlets with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	600	5% discount for BIS
24.1(MECHANICAL STRENGTH For surface mounting boxes)	-	600	5% discount for BIS
24.2(MECHANICAL STRENGTH For portable single socket-outlets: 1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	600	5% discount for BIS
24.2(MECHANICAL STRENGTH For portable multiple and combined socket outlets: 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	600	5% discount for BIS
24.2(MECHANICAL STRENGTH For plug 1) with enclosures, covers and bodies other than elastomeric or thermoplastic material)	-	600	5% discount for BIS
24.2(MECHANICAL STRENGTH For plug 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	600	5% discount for BIS
24.3(MECHANICAL STRENGTH for fixed socket-outlets with a main part intended to be mounted directly on a surface)	-	600	5% discount for BIS
24.4(MECHANICAL STRENGTH For portable single socket-outlets: 1) with enclosures, covers or bodies of thermoplastic or elastomeric material)	-	600	5% discount for BIS
24.4(MECHANICAL STRENGTH For portable multiple and combined socket outlets: 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	600	5% discount for BIS
24.4(MECHANICAL STRENGTH For Plug 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	600	5% discount for BIS
24.5(MECHANICAL STRENGTH For portable single socket-outlets: 1) with enclosures, covers or bodies of thermoplastic or elastomeric material)	-	600	5% discount for BIS
24.5(MECHANICAL STRENGTH For portable multiple and combined socket outlets: 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	600	5% discount for BIS
24.5(MECHANICAL STRENGTH For Plug 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	600	5% discount for BIS
24.6(MECHANICAL STRENGTH For screwed glands of accessories having an IP code higher than IP20)	-	600	5% discount for BIS
24.7(MECHANICAL STRENGTH For plug pins provided with insulating sleeves)	-	600	5% discount for BIS
24.8(MECHANICAL STRENGTH For shuttered socket-outlets)	-	600	5% discount for BIS
24.9(MECHANICAL STRENGTH For portable multiple and combined socket outlets (1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	600	5% discount for BIS
24.11(MECHANICAL STRENGTH For portable socket-outlets having means for suspension on a wall)	-	600	5% discount for BIS
24.12(MECHANICAL STRENGTH For portable socket-outlets having means for suspension on a wall)	-	600	5% discount for BIS
24.13(MECHANICAL STRENGTH For portable socket-outlets having means for suspension on a wall)	-	600	5% discount for BIS
24.14.1(MECHANICAL STRENGTH For fixed socket-outlets)	-	600	5% discount for BIS
24.14.2(MECHANICAL STRENGTH For fixed socket-outlets)	-	600	5% discount for BIS
24.14.3(MECHANICAL STRENGTH For plugs and portable socket-outlets)	-	600	5% discount for BIS
24.15(MECHANICAL STRENGTH )	-	600	5% discount for BIS
24.16(MECHANICAL STRENGTH For shroud of portable socket-outlets)	-	600	5% discount for BIS
25.1(RESISTANCE TO HEAT Accessories and surface mounting boxes)	-	600	5% discount for BIS
25.2(RESISTANCE TO HEAT Parts of insulating material necessary to retain current-carrying parts of the earthing circuit in position, as well as parts of the front surface zone of thermoplastic material)	-	600	5% discount for BIS
25.3(RESISTANCE TO HEAT Parts of insulating material not necessary to retain current-carrying parts and parts of the earthing circuit in position, even though they are in contact with them)	-	600	5% discount for BIS
25.4(RESISTANCE TO HEAT )	-	600	5% discount for BIS
26.1(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	200	5% discount for BIS
26.2(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	200	5% discount for BIS
26.3(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	200	5% discount for BIS
26.4(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	200	5% discount for BIS
26.5(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	200	5% discount for BIS
26.6(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	200	5% discount for BIS
26.7(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	200	5% discount for BIS
27.1(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	100	5% discount for BIS
27.2(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	100	5% discount for BIS
27.3(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	100	5% discount for BIS
28.1.1(Resistance to Abnormal Heat and to Fire Glow-Wire Test)	-	500	5% discount for BIS
28.1.2(Resistance to Abnormal Heat and to Fire for plugs with pins provided with insulating sleeves)	-	500	5% discount for BIS
28.2(Resistance to Tracking For accessories other than IP code higher than IPX0 parts of insulating material retaining live parts in position)	-	500	5% discount for BIS
29(RESISTANCE TO RUSTING)	-	550	5% discount for BIS
30.1(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Pressure Test at High Temperature)	-	1000	5% discount for BIS
30.2(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Static Damp Heat Test)	-	1000	5% discount for BIS
30.3(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Tests at Low Temperature)	-	1000	5% discount for BIS
30.4(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Impact Test at Low Temperature)	-	1000	5% discount for BIS

31 Dec, 2026

-
-

8878

Bharat Test House Pvt Ltd 781 Sonipat Haryana

9137826

IS 8978 (1992)

Specification for electric instantaneous water heaters (Second Revision)

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.10 of IS 8978 : 1992(Finish)	-	450	5% discount for BIS
Cl.10 of IS 8978 : 1992(Finish)	-	450	5% discount for BIS
Cl.11 of IS 8978 : 1992(Operation of flow switch)	-	200	5% discount for BIS
Cl.12 of IS 8978 : 1992(Endurance)	-	450	5% discount for BIS
Cl.12 of IS 8978 : 1992(Endurance)	-	450	5% discount for BIS
Cl.7 of IS 302-2-35:2017(Marking)	-	100	5% discount for BIS
Cl.6 of IS 302-2-35:2017(Classification)	-	100	5% discount for BIS
Cl.8 of IS 302-2-35:2017(Protection Against Access To Live Parts)	-	100	5% discount for BIS
Cl.10 of IS 302-2- 35:2011(Power Input & Current )	-	1500	5% discount for BIS
Cl.11 of 302-2-35:2017(Heating)	-	1500	5% discount for BIS
Cl.13 of IS 302-2-35:2017(Leakage Current & Electrical Strength at Operating Temperature )	-	1000	5% discount for BIS
Cl.14 of IS 302-2-35:2017(Transient Over Voltages )	-	100	5% discount for BIS
Cl.15 of IS 302-2-35-2011(Moisture Resistance )	-	2000	5% discount for BIS
Cl.16 of IS 302-2-35:2011(Leakage Current and Electric Strength)	-	1000	5% discount for BIS
Cl.17 IS 302-2-35:2017(Overload Protection of Transformers & Associated circuits )	-	50	5% discount for BIS
Cl.19 of IS 302-2-35:2017(Abnormal Operation)	-	1000	5% discount for BIS
Cl.20 of IS 302-2-35-2011(Stability & Mechanical Hazards )	-	100	5% discount for BIS
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	5% discount for BIS
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	100	5% discount for BIS
Cl.24 of IS 302-2-35:2017(Component )	-	50	5% discount for BIS
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	100	5% discount for BIS
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	100	5% discount for BIS
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	100	5% discount for BIS
Cl.28 of IS 302-2-35:2017(Screws and Connections )	-	100	5% discount for BIS
Cl.29 of IS 302-2-35:2017(Clearances, Creepage Distances and Solid Insulation)	-	100	5% discount for BIS
Cl.30 of IS 302-2-35: 2011(Resistance to Heat and Fire)	-	500	5% discount for BIS
Cl.31 of IS 302-2-35: 2011(Resistance to Rusting )	-	450	5% discount for BIS
Cl.32 of IS 302-2-35: 2011(Radiation, Toxicity and Similar Hazards )	-	50	5% discount for BIS
Cl.31 of IS 302-2-35: 2017(Resistance to Rusting )	-	450	5% discount for BIS
Cl.30.1 of IS 302-1:2008(Resistance to Heat and Fire)	-	450	5% discount for BIS
Cl.30.2 of IS 302-1:2008(Resistance to Heat and Fire)	-	450	5% discount for BIS
Cl.29.1 of IS 302-2-35:2017(Clearances, Creepage Distances and Solid Insulation : Clearance distance )	-	100	5% discount for BIS
Cl.29.2 of IS 302-2-35:2017(Clearances, Creepage Distances and Solid Insulation : Creepage distance )	-	100	5% discount for BIS
Cl.28 of IS 302-2-35:2017(Screws and Connections )	-	100	5% discount for BIS
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	100	5% discount for BIS
Cl.27.5 of IS 302-2-35:2017(Provision for Earthing : ECR )	-	100	5% discount for BIS
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	100	5% discount for BIS
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	100	5% discount for BIS
Cl.25.1 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : connection to the supply mains)	-	100	5% discount for BIS
Cl.25.5 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Type of attachment )	-	100	5% discount for BIS
Cl.25.8 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Resistance of supply cord )	-	100	5% discount for BIS
Cl.25.10 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Colour of Earthing conductor )	-	100	5% discount for BIS
Cl.25.12 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Moulding of supply cord )	-	100	5% discount for BIS
Cl.25.15 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Cord grip test )	-	100	5% discount for BIS
Cl.25.15 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Cord grip test - displacement )	-	100	5% discount for BIS
Cl.25.18 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	100	5% discount for BIS
Cl.24 of IS 302-2-35:2017(Component )	-	50	5% discount for BIS
Cl.23 of IS 302-2-35:2017(Internal Wiring ; Colour of earthing conductor)	-	100	5% discount for BIS
Cl.23 of IS 302-2-35:2017(Internal Wiring)	-	100	5% discount for BIS
Cl.22.1 of IS 302-1:2008(Construction : IP test )	-	1000	5% discount for BIS
Cl.22.2 of IS 302-1:2008(Construction : connection to supply mains )	-	1000	5% discount for BIS
Cl.22.6 of IS 302-1:2008(Construction : effect of water on 3 insulation )	-	1000	5% discount for BIS
Cl.22.6 of IS 302-2-35:2017(Construction : size of drain hole )	-	1000	5% discount for BIS
Cl.22.7 of IS 302-1:2008(Construction : safeguards against the risk of excessive pressure. )	-	1000	5% discount for BIS
Cl.22.11 of IS 302-1:2008(Construction : Fixing of non detachable parts )	-	1000	5% discount for BIS
Cl.22.12 of IS 302-1:2008(Construction : Fixing of Handle, knob, grips, levers and similar parts )	-	1000	5% discount for BIS
Cl.22.14 of IS 302-1:2008(Construction : Ragged or sharp edges )	-	1000	5% discount for BIS
Cl.22.17 of IS 302-1:2008(Construction : Spacers )	-	1000	5% discount for BIS
Cl.22.18 of IS 302-1:2008(Construction : Resistance to corrosion )	-	1000	5% discount for BIS
Cl 22.26 ,Cl.22.28, Cl 22.29, Cl 22.30 , Cl 22.31, Cl 22.32 of IS 302-1:2008(Construction : Supplymentry/ double / reinforced insulation for Class II/ Class III appliance )	-	1000	5% discount for BIS
Cl.22.33 of IS 302-1:2008(Construction : Direct contact of liquids )	-	1000	5% discount for BIS
Cl.22.34, Cl 22.35 of IS 302-1:2008(Construction : Shaft of operating Knobs )	-	1000	5% discount for BIS
Cl.22.44 of IS 302-1:2008(Construction : Shape and decoration )	-	1000	5% discount for BIS
Cl.22.47 of IS 302-2-35:2017(Construction : Water pressure test )	-	1000	5% discount for BIS
Cl.22.101 of IS 302-2-35:2017(Construction : Rated pressure of closed water heater )	-	1000	5% discount for BIS
Cl.22.102 of IS 302-2-35:2017(Construction : excessive temperature of outlet )	-	1000	5% discount for BIS
Cl.22.103 of IS 302-2-35:2017(Construction : Pressure relief device operation for closed water heater )	-	1000	5% discount for BIS
Cl.22.104 of IS 302-2-35:2017(Construction : Pressure in open outlet water heaters )	-	1000	5% discount for BIS
Cl.22.106 of IS 302-2-35:2017(Construction : Operation of thermal cut out for closed water heater )	-	1000	5% discount for BIS
Cl.22.107 of IS 302-2-35:2017(Construction : Temperature of outlet )	-	1000	5% discount for BIS
Cl.22.108 of IS 302-2-35:2017(Construction : Temperature of outlet water intended to supply for showring )	-	1000	5% discount for BIS
Cl.22.109 of IS 302-2-35:2017(Construction : Operation of presure switch of open outlet water heater )	-	1000	5% discount for BIS
Cl.22.110 of IS 302-2-35:2017(Construction : Provision for fixing to wall )	-	1000	5% discount for BIS
Cl.21.1 of IS 302-1:2008(Mechanical strength : Rough handling in normal use)	-	100	5% discount for BIS
Cl. 21.2 of IS 302-1:2008(Mechanical strength : prevent penetration by sharp implements. )	-	100	5% discount for BIS
Cl.20 of IS 302-2-35:2017(Stability & Mechanical Hazards )	-	100	5% discount for BIS
Cl.19 of IS 302-2-35:2017(Abnormal Operation : Emission of flames, molten metal ,or poisonous or ignitable gas)	-	1000	5% discount for BIS
Cl.19 of IS 302-2-35:2017(Abnormal Operation : Temperature rise of test corner)	-	1000	5% discount for BIS
Cl.19 of IS 302-2-35:2017(Abnormal Operation : Temperature rise of insulation of supply cord)	-	1000	5% discount for BIS
Cl.19 of IS 302-2-35:2017(Abnormal Operation : High voltage)	-	1000	5% discount for BIS
Cl.19 of IS 302-2-35:2017(Abnormal Operation : effect on container)	-	1000	5% discount for BIS
Cl.16 of IS 302-2-35:2017(Leakage Current and Electric Strength (After Humidity))	-	1000	5% discount for BIS
Cl.15 of IS 302-2-35:2017(Moisture Resistance )	-	2000	5% discount for BIS
Cl.14 of IS 302-2-35:2017(Transient Over Voltages )	-	100	5% discount for BIS
Cl.13 of IS 302-2-35:2017(Leakage Current & 3 Strength at Operating Temperature )	-	1000	5% discount for BIS
Cl.13 of IS 302-2-35:2017(Leakage Current & 3 Strength at Operating Temperature : High voltage )	-	1000	5% discount for BIS
Cl.11 of 302-2-35:2017(Heating : Temperature rise of test corner)	-	1500	5% discount for BIS
Cl.11 of 302-2-35:2017(Heating : Insulation of supply cord)	-	1500	5% discount for BIS
Cl.11 of 302-2-35:2017(Heating : room temperature)	-	1500	5% discount for BIS
Cl.10 of IS 302-2- 35:2017(Power Input & Current )	-	1500	5% discount for BIS
Cl.8 of IS 302-2-35:2017(Protection Against Access To Live Parts)	-	100	5% discount for BIS
Cl.7.1 of IS 302-1:2008(Marking : Rated Voltage)	-	100	5% discount for BIS
Cl.7.1 of IS 302-1:2008(Marking : Nature of supply)	-	100	5% discount for BIS
Cl.7.1 of IS 302-1:2008(Marking : Rated power input)	-	100	5% discount for BIS
Cl.7.1 of IS 302-1:2008(Marking : Manufacture identification)	-	100	5% discount for BIS
Cl.7.1 of IS 302-1:2008(Marking : Molel or type)	-	100	5% discount for BIS
Cl.7.1 of IS 302-1:2008(Marking : Symbol for class II)	-	100	5% discount for BIS
Cl.7.1 of IS 302-1:2008(Marking : IP number )	-	100	5% discount for BIS
Cl.7.1 of IS 302-1:2008(Marking : Country of manufacture)	-	100	5% discount for BIS
Cl.7.1 of IS 302-2-35:2017(Marking : rated pressure)	-	100	5% discount for BIS
Cl.7.6 of IS 302-1:2008(Marking : Symbols)	-	100	5% discount for BIS
Cl.7.8 of IS 302-1:2008(Marking : Terminal for connection )	-	100	5% discount for BIS
Cl.7.10 & 7.11 of IS 302-1:2008(Marking : Indication for direction of control)	-	100	5% discount for BIS
Cl.7.13 of IS 302-1:2008(Marking : Language)	-	100	5% discount for BIS
Cl.7.14 of IS 302-1:2008(Marking ; Legibility and durability)	-	100	5% discount for BIS
Cl.7.15 of IS 302-1:2008(Marking : Position of marking)	-	100	5% discount for BIS
Cl.7.101 of IS 302-2-35:2017(Marking : Woter inlet and outlet idetification)	-	100	5% discount for BIS
Cl.7.102 of IS 302-2-35:2017(Marking : Standard mark)	-	100	5% discount for BIS
Cl.21.1 of IS 302-2-35-2011(Mechanical strength)	-	100	5% discount for BIS
Cl. 21.2 of IS 302-1:2008(Mechanical strength)	-	100	5% discount for BIS

31 Dec, 2026

-
-

8879

Bharat Test House Pvt Ltd 781 Sonipat Haryana

9137826

IS 2993 (1998)

A.C. motor capacitors (Second Revision)

425000 View breakup
Type Test (Class B): Rs.4,15,000/-¬, Type Test (Class C): Rs.4,00,000/-, Type Test (Class D): Rs.3,80,000/- (5% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.5(Tangent of loss angle)	-	5000	5% discount for BIS
2.6(Visual Examination)	-	500	5% discount for BIS
2.7(Voltage test between terminals)	-	2500	5% discount for BIS
2.8(Voltage test between terminals and case)	-	3000	5% discount for BIS
2.9(Capacitance measurement)	-	5000	5% discount for BIS
2.11.1(Robustness of terminations)	-	150	5% discount for BIS
2.11.1.1(Tensile)	-	150	5% discount for BIS
2.11.1.2(Bending (half cf the terminations))	-	150	5% discount for BIS
2.11 .1.3(Torsion (other half of the terminations))	-	150	5% discount for BIS
2.11.1.4(Torque (screw terminals))	-	150	5% discount for BIS
2.11.1.5(Visual Examination)	-	150	5% discount for BIS
2.11.2(Soldering)	-	150	5% discount for BIS
2.11.3(Vibration)	-	800	5% discount for BIS
2.11.4(fixing bolt or stud (if fitted))	-	150	5% discount for BIS
2.12(Sealing Test)	-	4500	5% discount for BIS
2.13(Endurance test)	-	37000	5% discount for BIS
2.13.1(Endurance test :Testing in air with forced circulation)	-	300000	5% discount for BIS
2.13.3(Endurance test : Conditions of compliance)	-	6000	5% discount for BIS
2.14(Damping heat test)	-	40000	5% discount for BIS
2.15(Self-healing test (if applicable))	-	12000	5% discount for BIS
2.16.3(Destruction test : Test procedure)	-	400	5% discount for BIS
2.16.3.1(Destruction test : Test procedure - Preparation and pre-conditioning )	-	400	5% discount for BIS
2.16.3.2(Destruction test : Test procedure : DC conditioning)	-	400	5% discount for BIS
2.16.3.3(Destruction test : Test procedure : AC destruction test)	-	400	5% discount for BIS
2.16.4(Destruction tes: Evaluation of the failure )	-	400	5% discount for BIS
5.1(Check marking)	-	500	5% discount for BIS
2.1(Check of dimensions)	-	500	5% discount for BIS
2.10(Check of dimensions)	-	500	5% discount for BIS
4.1(Creepage distances and clearances)	-	700	5% discount for BIS
4.2(Terminals and connecting cables)	-	500	5% discount for BIS
4.3(Earth connections)	-	500	5% discount for BIS
4.4(Discharge devices)	-	800	5% discount for BIS

31 Dec, 2026

-
REVISED TESTING CHARGES W.E.F. 5-7-2021. For Rated voltage upto and including 660V

8880

Bharat Test House Pvt Ltd 781 Sonipat Haryana

9137826

IS 15063 (2001)

Alkaline manganese dioxide cells - Specification

For LR03(AAA), LR6(AA), LR14(C), LR20(D), 6LR61(9V)

46250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Designation )	-	500	5% discount for BIS
5(Dimensions)	-	1000	5% discount for BIS
6(Materials and Construction)	-	500	5% discount for BIS
7(Battery Connections)	-	750	5% discount for BIS
8(Terminals)	-	500	5% discount for BIS
9(Marking)	-	500	5% discount for BIS
10.1(General)	-	0	5% discount for BIS
10.2.3(Standard Atmospheric Condition of Testing)	-	0	5% discount for BIS
11, 11.1, 11.2(Continuous Discharge Initial Life Test)	-	12500	5% discount for BIS
11, 11.1, 11.3(Intermittent Discharge Initial Application Test (Table 5A, LR03))	-	12500	5% discount for BIS
11, 11.1, 11.3(Intermittent Discharge Initial Application Test (Table 5B, LR6))	-	12500	5% discount for BIS
11, 11.1, 11.3(Intermittent Discharge Initial Application Test (Table 5C, LR14))	-	12500	5% discount for BIS
11, 11.1, 11.3(Intermittent Discharge Initial Application Test (Table 5D, LR20))	-	12500	5% discount for BIS
11, 11.1, 11.3(Intermittent Discharge Initial Application Test (Table 5E, 6LR61))	-	12500	5% discount for BIS
12(Leakage Test)	-	17500	5% discount for BIS
13(Delayed Life Test)	-	12500	5% discount for BIS
10.2.2(Discharge Resistance)	-	0	5% discount for BIS
Cl-10.2.2(Discharge Resistance)	-	0	5% discount for BIS

31 Dec, 2026

-
-

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number