BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

11245 Results

S.No.

Lab Name

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

8911

Central Institute of Petrochemical Engineering and Technology, Guwahati

IS 7834 : Part 2 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 2 Specific requirements for 45 degrees elbows

All

1600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.2(Manufacture)	-	500	All dimensions charge are inclusive
2.2.2, Table 1(45 ̊ Elbow Laying Length)	-	0	-
2.2.3( inside diameter of the socket)	-	0	-
2.2.3(socket length)	-	0	-

Complete

31 Dec, 2026

-
-

8912

Central Institute of Petrochemical Engineering and Technology, Guwahati

IS 7834 : Part 1 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 1 General requirements

All

6725 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4(Minimum Thickness)	-	500	-
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Minimum Socket Length)	-	0.0	socket length, Internal ID & tolerance all are inclusive in this charge
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Mean Socket Internal Diameter at Mid-Point of Socket Length)	-	0.0	-
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Out-of-roundness tolerances of socket inside diameter)	-	0.0	-
Cl. 6.1(Stress Relief Test- Appendix A)	-	700	-
Cl. 6.2(Opacity- Appendix B)	-	575	-
Cl. 6.3(Effect on Water[(Lead ( first extraction )]- Appendix C)	-	3000	All effect on water test parameters are included in this charge
Cl. 6.3(Effect on Water[(Lead ( third extraction )]- Appendix C)	-	0	-
Cl. 6.3(Effect on Water [Dialkyl tin C4, and higher homologues, measured as tin ( third extraction )]- Appendix C)	-	0	-
Cl. 6.3(Effect on Water [Other toxic substances ( third extraction )]- Appendix C)	-	0	-
Cl. 6.4(Short-Term Hydraulic Test- Appendix D)	-	850	-

Complete

31 Dec, 2026

-
-

8913

Central Institute of Petrochemical Engineering and Technology, Guwahati

IS 6192 (1994)

Textiles – Monoaxially oriented high density polyethylene tapes – Specification (second revision)

All

4250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Linear density (For test method Refer IS 6193:1971 and IS 7703 Part 1))	-	500	-
5.5(Thickness (For test method Refer IS 6193:1971))	-	250	-
5.4(Finished width (For test method Refer IS 6193:1971))	-	250	-
5.3(Elongation (For test method Refer IS 6193:1971))	-	1100	-
5.2(Tenacity (For test method Refer IS 6193:1971))	-	250	-
5.6(Heat Shrinkage at 60 degree C(For test method Refer IS 6193:1971) )	-	700	-
5.6(Heat Shrinkage at 95 degree C(For test method Refer IS 6193:1971) )	-	700	-
4(MATERIAL(Refer IS 7328 :1974))	-	500	-

Complete

31 Dec, 2026

-
-

8914

Central Institute of Petrochemical Engineering and Technology, Guwahati

IS 4985 (2000)

Unplasticized pvc pipes for potable water supplies - Specification (Third Revision)

upto DN 315mm

23925 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(CLASSIFICATION OF PIPES)	-	0.0	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Minimum))	-	500	Cl 7.1.1.1 to 7.2.1.2 all are compiled in same test charge of 500
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Mamimum))	-	0	Cl 7.1.1.1 to 7.2.1.2 all are compiled in same test charge of 500
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. Variation)	-	0	Cl 7.1.1.1 to 7.2.1.2 all are compiled in same test charge of 500
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Minimum))	-	0	Cl 7.1.1.1 to 7.2.1.2 all are compiled in same test charge of 500
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Maximum))	-	0	Cl 7.1.1.1 to 7.2.1.2 all are compiled in same test charge of 500
7.1.2.1(DIMENSIONS-PIPE-Thickness(Minimum))	-	0	Cl 7.1.1.1 to 7.2.1.2 all are compiled in same test charge of 500
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Minimum Length)	-	0	Cl 7.1.1.1 to 7.2.1.2 all are compiled in same test charge of 500
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Minimum))	-	0	Cl 7.1.1.1 to 7.2.1.2 all are compiled in same test charge of 500
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Maximum))	-	0	Cl 7.1.1.1 to 7.2.1.2 all are compiled in same test charge of 500
7.2.1.2(a)-Table 5(DIMENSIONS-Sockets for elastomeric sealing ring joints-Minimum depth of engagement)	-	0	Cl 7.1.1.1 to 7.2.1.2 all are compiled in same test charge of 500
10.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	300	-
10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity)	-	575	-
9.1(PIPE ENDS)	-	0	compiled with the test charges for cl no. 10.1
10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test)	-	900	-
10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature)	-	1100	-
10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density)	-	500	-
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test))	-	11000	-
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test))	-	850	-
Clause 10.7(Sulphated Ash Content)	-	950	-
11.2(Resistance to External Blows at 0°C)	-	1400	-
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)-for Integral Sealing Ring Sockets)	-	5000	-
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Integral Sealing Ring Sockets)	-	850	-

Complete

31 Dec, 2026

-
-

8915

BIS, Central Laboratory (CL)

IS 4572 (2014)

Fibre ropes – Polyamide 3- 4- 8- and 12-Strand ropes

Rs 1360/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.5.1 Polyamide ropes ( shall be made in one of the following constructions: — type A: 3-strand hawser-laid rope (see Figure 1); — type B: 4-strand shroud-laid rope (see Figure 2); — type L: 8-strand braided rope (see Figure 3); — type T: 12-strand braided rope (see Figure 4).)	-
5.2 (Cl. 4.4.2) of ISO 9554: 2010 (Workmanship)	-
5.2 (Cl. 4.4.1) of ISO 9554: 2010 (Workmanship)	-
5.2 (Cl. 4.3) of ISO 9554: 2010 (Treatment )	-
5.2 (Cl. 4.2) of ISO 9554: 2010 (Structure of rope)	-
5.2 (Cl. 4.2) of ISO 9554: 2010 (No. of Yarns in rope )	-
5.2 (Cl. 4.2) of ISO 9554: 2010 (Construction & Structure )	-
5.2 Cl. 4.1 (b) of ISO 9554: 2010 (Constituent Materials As per )	-
Cl.6 Tables 1, 2 and 3. (Cl.Linear density and minimum breaking force shall be in accordance with Tables 1, 2 and 3.)	-

Partial

-
-

8916

MSME Testing Centre, New Delhi

IS 1341 (2018)

Steel Butt Hinges - Specification (Sixth Revision)

3900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3 Tables 2 to 9(Types)	-	300	-
5.1 Tables 2 to 9 (2)(Size of Hinge)	-	300	-
5.1 Tables 2 to 9 (3)(Length A)	-	300	-
5.1 Tables 2 to 9 (4)(Breadth B)	-	300	-
5.1 Tables 2 to 9 (4)(Breadth B1)	-	300	-
5.1 Tables 2 to 9 (4)(Breadth B2)	-	300	-
5.1 Tables 2 to 9 (5)(Thickness of Flap C)	-	300	-
5.1 Tables 2 to 9 (6)(Diameter of Hinge Pin D)	-	300	-
5.1 Tables 2 to 9 (7)(Number of Knuckles)	-	300	-
5.1 Tables 2 to 9 (8)(Number of Screw Holes)	-	300	-
5.1 Tables 2 to 9 (9)(Holes for Screw No.)	-	300	-
6.1(General)	-	300	-
6.1(General)	-	300	-
6.1(General)	-	300	-
6.2.1(Knuckles)	-	300	-
6.3(Pins)	-	300	-
6.4(Screw Holes)	-	300	-
6.4.2(Position of Holes)	-	300	-
6.4.2(X)	-	300	-
6.4.2(Y)	-	300	-
6.4.2(Z)	-	300	-
6.4.2.1(Position of Holes)	-	300	-

Complete

31 Dec, 2026

-
-

8917

Central Institute of Petrochemical Engineering and Technology, Guwahati

IS 2508 (2016)

Polyethylene films and sheets - Specification (Third Revision)

ALL

17725.00 View breakup
FOR OTHERS : Rs. 14350/- + GST for Low Density Polyethylene Films (Natural) Type I & II. Rs. 7700/- GST for Low Density Polyethylene Films (Natural) Type III & IV Rs. 16925/- + GST for Low Density Polyethylene Films (Black) Type I & II. Rs. 10275/- + GST for Low Density Polyethylene Films(Black) Type III & IV. For PE Film & sheet - Raw Materials Rs. 2650/- + GST for Natural Compound Rs. 1500/- + GST for Black Compound. Rs. 4075/- + GST for Carbon Black Masterbatch (Optional). Rs. 5100/- + GST for Carbon Black Powder (Optional). FOR BIS : Rs. 12025/- + GST for Low Density Polyethylene Films (Natural) Type I & II. Rs. 5900/- + GST for Low Density Polyethylene Films (Natural) Type III & IV. Rs. 13956/- + GST for Low Density Polyethylene Films (Black) Type I & II. Rs. 7831/- + GST for Low Density Polyethylene Films (Black) Type III & IV. For PE Film & sheet - Raw Materials. For PE Film & sheet - Raw Materials Rs. 1988/- + GST for Natural Compound. Rs. 375/- + GST for Black Compound. Rs. 3056/- + GST for Carbon Black Masterbatch (Optional). Rs. 3825/- + GST for Carbon Black Powder (Optional).

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.4(Density, Cl.5 of IS 13360(Part-3/Section-1))	-	500	-
5.1.5(Melt Flow Index. Cl 6, 7 of IS 13360(Part-4/Section-1))	-	1100	-
5.1.6a(Carbon Black Content, Annex-A)	-	925	-
5.1.6b(Ash Content, Annex-A)	-	950	-
5.1.6c(Carbon Black Dispersion, Cl.16 of IS 2530)	-	700	-
5.2.2(Tolerance on Thickness, Annex-A)	-	500	-
6.1, Table 1(Tensile strength at break. A) Machine Direction. IS 13360 (Part 5/Sec 1))	-	1225	-
6.1, Table 1(Tensile strength at break. B) Transverse Direction. IS 13360 (Part 5/Sec 3))	-	1225	-
6.1, Table 1(Ageing test at (70-1)c for 7 days , cl 4 IS 7016 )	-	4300	-
6.1, Table 1(Elongation at break ,A) Machine direction .IS 13360(Part-5/sec-1) )	-	1225	-
6.1, Table 1(Elongation at break ,B) Cross-machine direction..IS 13360(Part-5/sec-3) )	-	1225	-
6.1, Table 1(Dartimpact strength Method B of IS 13360 (Part-5/sec-6) )	-	1000	-
6.1, Table 1(Tear resistence. A) Machine direction Annex B)	-	875	-
6.1, Table 1(Tear resistence. B) Transverse direction )	-	875	-
8.1, Table 3(Puncture resistance , Annex C)	-	1100	-
9.1, Table 4(Tensile properties ,A) Yield strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0.0	-
9.1, Table 4(Tensile properties , B) Break strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0.0	-
9.1, Table 4(Tensile properties ,C) Yield elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0.0	-
9.1, Table 4(Tensile properties ,D) Break elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0.0	-

Complete

31 Dec, 2026

-
-

8918

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING AND TECHNOLOGY (CIPET):CSTS-BHOPAL

IS 14635 : Part 1 (2020)

Fluoropolymer Dispersions and Moulding and Extrusion Materials Part 1 Designation System ( First Revision )

7300.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.5.1.1.1(Standard Specific Gravity in accordance with IS 14635 part 2)	-	500.00	-
4.5.1.1.3(Bulk Density)	-	500.00	-
4.5.1.1.5(Tensile Properties (Tensile stress) in accordance with IS 13360 (Part 5/Sec 2))	-	1350.00	1100.00 (Testing Charge) + 250.00 (Conditioning charge)
4.5.1.1.5(Tensile Properties (Elongation) in accordance with IS 13360 (Part 5/Sec 2))	-	1350.00	1100.00 (Testing Charge) + 250.00 (Conditioning charge)
4.5.1.1.6(Dielectric strength (IEC 60243-1 or ASTM D 149))	-	1350.00	1100.00 (Testing Charge) + 250.00 (Conditioning charge)
4.5.1.1.9(Melting Peak Temperature in accordance with IS 14635 (Part 2)	-	2250.00	2200.00 (Testing Charge) + 250.00 (Conditioning charge)

Complete

31 Dec, 2026

-
-

8919

MSME Testing Centre, New Delhi

IS 2082 (2018)

Stationary storage type electric water heaters - Specification (Fifth Revision)

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
(Cl.8 of IS 302-2-21:2011)(Protection Against Access to Live Parts)	-	2500	-
(Cl.10 of IS 302-2-21: 2011)(Power Input & Current)	-	2500	-
(Cl.11 of 302-2-21:2011)(Heating)	-	3000	-
(Cl.13 of IS 302-2-21:2011)(Leakage Current )	-	4000	-
(Cl.14ofIS302-2-21:2011)(Transient Over Voltages)	-	2000	-
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	4000	-
Cl.16 of IS 302-2-21-2018(Leakage current and Electric strength (After humidity): Leakage current )	-	4000	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	2000	-
(Cl.21ofIS302-2-21:2011)(Mechanical strength)	-	2000	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	2000	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	2000	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	2000	-
(Cl.28 of IS 302-2-21:2011)(Screws & Connections)	-	2000	-
(Cl.30 of IS 302-2-21:2011)(Resistance to Heat & Fire)	-	4000	-
Cl.31 of IS 302-2-21:2018(Resistance to Rusting)	-	2500	-
(Cl.29ofIS302-2-21:2011)(Clearances, Creepage Distances and Solid Insulation)	-	25000	-

Complete

31 Dec, 2026

-
Excl: Cl.19.11.4.1 to Cl.19.11.4.7 (EMI/EMC Test)

8920

BIS, Central Laboratory (CL)

IS/ISO 3183 (2007)

Petroleum and Natural Gas Industries - Steel Pipe for Pipeline Transportation Systems (Amalgamating IS1978:1982 and IS1979:1985)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 9.13 (Height of Weld bead)	-
Cl 9.12 (Finish of Pipe Ends)	-
Cl 9.12 (Finish of Pipe Ends)	-
Cl 9.12 (Finish of Pipe Ends)	-
Cl 9.12 (Finish of Pipe Ends)	-
Cl 9.12 (Finish of Pipe Ends)	-
Cl 9.11 (Dimensions, Mass & Tolerances)	-
Cl 9.11 (Dimensions, Mass & Tolerances)	-
Cl 9.11 (Dimensions, Mass & Tolerances)	-
Cl 9.11 (Dimensions, Mass & Tolerances)	-
Cl 9.11 (Dimensions, Mass & Tolerances)	-
Cl 9.10 (Surface Conditions. Imperfections and defects)	-
Cl 9.9 (DWT Test (For PSL 2 Welded Pipe))	-
Cl 9.8 (CVN Impact Test (For PSL 2 Pipe))	-
Cl 9.7 (Guided Bend Test)	-
Cl 9.6 (Flattening Test - IS 2328)	-
Cl 9.5 (Bend Test - IS 2329)	-
Cl 9.3 - Table 6 & 7 (Tensile Properties)	-
Cl 9.3 - Table 6 & 7 (Tensile Properties)	-
Cl 9.3 - Table 6 & 7 (Tensile Properties)	-
Cl 9.3 - Table 6 & 7 (Tensile Properties)	-
Cl 9.13 (Height of Weld bead)	-
Cl 9.12 (Finish of Pipe Ends)	-
Cl 9.12 (Finish of Pipe Ends)	-
Cl 9.12 (Finish of Pipe Ends)	-
Cl 9.12 (Finish of Pipe Ends)	-
Cl 9.12 (Finish of Pipe Ends)	-
Cl 9.11 (Dimensions, Mass & Tolerances)	-
Cl 9.11 (Dimensions, Mass & Tolerances)	-
Cl 9.11 (Dimensions, Mass & Tolerances)	-
Cl 9.11 (Dimensions, Mass & Tolerances)	-
Cl 9.11 (Dimensions, Mass & Tolerances)	-
Cl 9.10 (Surface Conditions. Imperfections and defects)	-
Cl 9.9 (DWT Test (For PSL 2 Welded Pipe))	-
Cl 9.8 (CVN Impact Test (For PSL 2 Pipe))	-
Cl 9.7 (Guided Bend Test)	-
Cl 9.6 (Flattening Test - IS 2328)	-
Cl 9.5 (Bend Test - IS 2329)	-
Cl 9.3 - Table 6 & 7 (Tensile Properties)	-
Cl 9.3 - Table 6 & 7 (Tensile Properties)	-
Cl 9.3 - Table 6 & 7 (Tensile Properties)	-
Cl 9.3 - Table 6 & 7 (Tensile Properties)	-

Partial

-
EXCLUDING -; i] cl 9.4 hydrostaic test , ii] cl 9.10.1.3 imperfection, iii] cl 9.10.6 hard spots

8921

BIS, Central Laboratory (CL)

IS 3549 (2017)

Rubber hoses and hose assemblies for water suction and discharge - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 4 (Classification)	-
Cl 5 (Couplings and end fittings)	-
Cl 6.1 (Lining)	-
Cl 6.2 (Reinforcement)	-
Cl 6.3 (Cover)	-
Cl 7.1 & Table 3 (Bore (inside diameter))	-
Cl 7.2 (Enlarged ends)	-
Cl 7.3 (Unit lengths)	-
Cl 7.4 & Table 4 (Lining)	-
Cl 7.5 (Cover)	-
Cl 8.1.2 & Table 1 (Tensile strength, min.)	-
Cl 8.1.2 & Table 1 (Tensile strength, min.)	-
Cl 8.1.2 & Table 1 (Elongation at break, min.)	-
Cl 8.1.2 & Table 1 (Elongation at break, min.)	-
Cl 8.1.3 & Table 1 (Resistance to ageing-Change in tensile strength from original value (max.))	-
Cl 8.1.3 & Table 1 (Resistance to ageing-Change in tensile strength from original value (max.))	-
Cl 8.1.3 & Table 1 (Resistance to ageing-Change in elongation at break from original value (max.) )	-
Cl 8.1.3 & Table 1 (Resistance to ageing-Change in elongation at break from original value (max.) )	-
Cl 8.2.1 & Table 2 (Hydrostatic-pressure requirements (proof pressure test))	-
Cl 8.2.1 & Table 4 (Variation in length at max. working pressure)	-
Cl 8.2.2 & Table 2 (When tested by the method specified in ISO 1402, hoses shall meet the requirements of Table 2.)	-
Cl 8.2.3 & Table 3 (Resistance to bending (minimum bend radius as a function of nominal size))	-
Cl 8.2.4 & Table 4 (Resistance to suction flattening)	-
Cl 8.2.5 & Table 4 (Low-temperature flexibility)	-

Partial

-
EXCLUDING :Test facility not avalible For ozone resistance test ,Adhesion test, low temperature flexibility, Resistence of suction flattering,Resistance of bending, burst test, Hydrostatic pressure requirement (Proof Test)

8922

BIS, Central Laboratory (CL)

IS 7904 (1995)

High Carbon Steel Wire Rods

Rs. 8032/ View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 9 (Dimensions & tolerances)	-

Complete

-
Grade of Steel as per Table 1, Information wrt Micro Alloy addition and type of killing may also be declared. Sample Size 5 pcs of 5x5 cm having dia> 3mm and thickness > 0.8 mm can only be tested.;

8923

BIS, Central Laboratory (CL)

IS 446 (2017)

Rubber hoses, textile - Reinforced, for compressed air - Specification (Fifth Revision)

- View breakup
Rs. 5620/- excluding physical requirements for finished hose (Cl. 7.2).

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 4 (Classification)	-
Cl 4 (Classification)	-
Cl 4 (Classification)	-
Cl 5 (Materials and construction)	-
Cl 6.1 & Table 1 (Internal diameters and tolerances)	-
Cl 6.2 (Concentricity)	-
Cl 6.3 (Tolerance on length)	-
Cl 6.4 (Minimum thickness of lining and cover-Type 1 )	-
Cl 6.4 (Minimum thickness of lining and cover-Type 1 )	-
Cl 6.4 (Minimum thickness of lining and cover-Type 2 )	-
Cl 6.4 (Minimum thickness of lining and cover-Type 2 )	-
Cl 6.4 (Minimum thickness of lining and cover-Type 3)	-
Cl 6.4 (Minimum thickness of lining and cover-Type 3)	-
Cl 7.1 & Table 2 (Minimum tensile strength)	-
Cl 7.1 & Table 2 (Minimum tensile strength)	-
Cl 7.1 & Table 2 (Minimum elongation at break)	-
Cl 7.1 & Table 2 (Minimum elongation at break)	-
Cl 7.1 & Table 2 (Resistance to ageing-Change in tensile strength from original value (max.) )	-
Cl 7.1 & Table 2 (Resistance to ageing-Change in tensile strength from original value (max.) )	-
Cl 7.1 & Table 2 (Resistance to ageing-Change in elongation at break from original value (max.) original value (max.) )	-
Cl 7.1 & Table 2 (Resistance to ageing-Change in elongation at break from original value (max.) original value (max.) )	-
Cl 7.1 & Table 2 (Resistance to liquids-Increase in volume (class A))	-
Cl 7.1 & Table 2 (Resistance to liquids-Increase in volume (class A))	-
Cl 7.1 & Table 2 (Resistance to liquids-Increase in volume (max.) (class B only) )	-
Cl 7.1 & Table 2 (Resistance to liquids-Increase in volume (max.) (class B only) )	-
Cl 7.1 & Table 2 (Resistance to liquids-Increase in volume (max.) (class C only) )	-
Cl 7.1 & Table 2 (Resistance to liquids-Increase in volume (max.) (class C only) )	-
Cl 7.2 & Table 3 (Proof pressure)	-
Cl 7.2 & Table 3 (Proof pressure)	-
Cl 7.2 & Table 3 (Proof pressure)	-
Cl 7.2 & Table 3 (Change in length at maximum working pressure)	-
Cl 7.2 & Table 3 (Change in diameter at maximum working pressure)	-
Cl 7.2 & Table 3 (Minimum burst pressure)	-
Cl 7.2 & Table 3 (Minimum burst pressure)	-
Cl 7.2 & Table 3 (Minimum burst pressure)	-
Cl 7.2 & Table 3 (Flexibility at 23 °C)	-
Cl 7.2 & Table 3 (Low-temperature flexibility)	-

Partial

-
EXCLUDING -; Test facility not avalible For Resistance to liquids,Burst test, Adhesion test, Ozone Test, Flexibility test

8924

BIS, Central Laboratory (CL)

IS 14929 (2001)

Textiles - High strength polyolefins copolymer ropes - Specification

Rs.2700/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 (MANUFACTURE)	-
5.2.1 (Construction)	-
5.2.2 (Construction)	-
5.2.3 (Construction)	-
5.3 (Structure)	-
5.4 ( Rope)	-
6.1, Table 1 /Table 2. ( REQUIREMENTS:- Linear Density)	-
6.1, Table 1 /Table 2. ( Breaking Strength, Min)	-
6.2, Table 1 and Table 2 ( Mass of the Coil)	-
6.3 ( Length of Coil)	-

Partial

-
-

8925

MSME Testing Centre, New Delhi

IS 302 : Part 2 : Sec 21 (2018)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 21 stationary storage type electric water heaters (Second Revision)

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.0(Protection against access to live parts)	-	2500	-
10.0(Input and Current)	-	2500	-
11.0(Heating)	-	3000	-
13.0(Leakage Current and electric strength at operating temperature)	-	4000	-
14.0(Transient Overvoltage)	-	2000	-
15.0(Moisture resistance)	-	4000	-
16.0(Leakage current and Electric strength (After Humidity (Environmental) Treatment))	-	4000	-
19.0(Abnormal Operation)	-	2000	50% for Additional Core
21.0(Mechanical Strength)	-	2000	-
25.0(Supply Connection and External Flexible Cords)	-	2000	-
26.0(Terminals for external conductors)	-	2000	-
27.0(Provision For Earthing)	-	2000	-
28.0(Screws and Connections)	-	2000	-
30.0(Resistance To Heat and Fire)	-	4000	-
31.0(Resistance To Rusting)	-	2500	-
29.0(Creepage Distances and Clearances)	-	2500	-
22.0(Construction)	-	2000	-
23.0(Internal Wiring)	-	2000	-
17.0(Overload Protection of transformer and associated circuit)	-	2000	-
20.0(Stability and mechanical hazards)	-	5000	-

Complete

31 Dec, 2026

-
Excl: Cl. 19.11.4.1 to Cl. 19.11.4.7 (EMI/EMC tests)

8926

MSME Testing Centre, New Delhi

IS 996 (2009)

Single phase a.c. induction motors for general purpose (Third Revision)

12825 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10(Type of enclosures)	-	10000	-
12.6(Vibration Severity)	-	2000	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	5000	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	3000	-
13.1(High voltage test)	-	4000	-
13.2(Moisture proofness)	-	4000	-
13.3(Leakage current test)	-	2000	-
12.7(Insulation resistance test)	-	4000	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	2000	-

Complete

31 Dec, 2026

-
-

8927

BIS, Central Laboratory (CL)

IS 16703 (2017)

Textiles - High density polyethylene (HDPE) polypropylene (PP) woven sacks for packaging of 25 kg polymer materials - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 (Mass of Bale)	-
(Clauses 4.2, 5.1, 5.2, 5.3 and 5.4) Table 1 (Ash Content ,a) For UV stabilized sacks)	-
(Clauses 4.2, 5.1, 5.2, 5.3 and 5.4) Table 1 (Ash Content ,b) For non- UV stabilized sacks)	-
5.2 Table 1 (Dimensions)	-
5.2 Table 1 (Dimensions)	-
5.2 Table 1 (Dimensions)	-
5.2 Table 1 (Dimensions)	-
5.2 Table 1 (Ends per dm)	-
5.2 Table 1 (Picks per dm)	-
5.2 Table 1 (Mass of sack, Gusseted type, g - IS 1964)	-
5.2 Table 1 (Average breaking strength of fabric [Ravelled strip method, 325 mm × 70mm1)] Min, N) (kgf): - IS 1969 (Part 1))	-
5.2 Table 1 (Average breaking strength of fabric [Ravelled strip method, 325 mm × 70mm1)] Min, N2) (kgf): - IS 1969 (Part 1))	-
5.2 Table 1 (Breaking strength of bottom seam (Ravelled strip method), Min, N) (kgf) - IS 9030)	-
5.2 Table 1 (Elongation at break of fabric (Ravelled strip method), percent : IS 1969 (Part 1))	-
5.2 Table 1 (Elongation at break of fabric (Ravelled strip method), percent : IS 1969 (Part 1))	-

Partial

-
EXCLUDING 5.3 Drop Impact Testing of Filled Sacks, 5.5 UV Resistance,;

8928

MSME Testing Centre, New Delhi

IS 9763 (2000)

Plastics Bib Taps, Pillar Taps, Angle Valves and Stop Valves for Hot and Cold Water Services -

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
(Cl. 5)(Nominal Size)	-	300	-
(Cl. 7)(Identification)	-	300	-
(Cl. 7)(Identification)	-	300	-
(Cl.6 , Table 3)(Dimensions)	-	1800	-
(Cl 8)(Construction,Workmanship and Finish)	-	300	-
(Cl 8)(Construction,Workmanship and Finish)	-	300	-
(Cl 8)(Construction,Workmanship and Finish)	-	300	-
(Cl 8.4)(Minimum Thickness)	-	300	-
(Cl. 8.5)(Finish)	-	300	-
(Cl 9.1)(Resistance to Residual Chlorine in Water)	-	500	-
(Cl 9.2)(Drip Proofness Test)	-	1500	-
(Cl 9.3)(Thermal Shock Test )	-	500	-
(Cl 9.4)(Hydraulic Pressure Test)	-	1500	-
(Cl 9.5)(Mechanical Strength Characteristics)	-	1500	-

Complete

31 Dec, 2026

-
-

8929

BIS, Central Laboratory (CL)

IS 9473 (2002)

Respiratory protective devices - Filtering half masks to protect against particles - Specification (First Revision)

Rs. 600/ View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 5.2 (Cleaning and Disinfecting)	-
Cl 5.2 (Cleaning and Disinfecting)	-
5.2 (Cleaning & Disinfection)	-
Cl 5.13 (De-mountable Parts)	-
Cl 5.13 (De-mountable Parts)	-
5.13 (Demountable Parts, Visual Inspection )	-
Cl 5.6 (Flammability)	-
Cl 5.6 (Flammability)	-
5.6 (Flammability (TC- 2 Samples) )	-
5.6 (Flammability (AR-2 Samples) )	-
5.6 (Flammability (TC- 2 Samples) )	-
5.6 (Flammability (AR-2 Samples) )	-
5.10.2.4 (Exh. Valve Tensile Force (TC-1 Sample) )	-
5.10.2.4 (Exh. Valve Tensile Force (SW-1 Sample) )	-
5.10.2.4 (Exh. Valve Tensile Force (AR-1 Sample) )	-
5.10.2.4 (Exh. Valve Tensile Force (TC-1 Sample) )	-
5.10.2.4 (Exh. Valve Tensile Force (SW-1 Sample) )	-
5.10.2.4 (Exh. Valve Tensile Force (AR-1 Sample) )	-

Partial

-
-

8930

BIS, Central Laboratory (CL)

IS 1804 (2004)

Steel wire ropes – Fibre main cores – Specification (fourth revision)

Rs 4200/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3 / 3.2 (Man-Made Fibre CoresMan-made fibre cores shall be made entirely from new fibres of the following types: )	-
5.1 (PHYSICAL REQUIREMENTS / Core Lubrication)	-
5.2 (PHYSICAL REQUIREMENTS / Lay length)	-
7.2 (Nominal Diameter and Nominal Runnage)	-
8 (CORE DESIGNATION)	-
9 / 9.1 (IDENTIFICATION)	-
6 / 6.1 (CHEMICAL CONTENTS / Water Soluble Acids )	-
6.2 (Salt)	-

Complete

-
Sample Size 5 pcs of 5x5 cm having dia> 3mm and thickness > 0.8 mm;

8931

BIS, Central Laboratory (CL)

IS 17111 (2019)

Heat - Treated steels, alloy steels and free - Cutting steels - Ball and roller bearing steels

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.7.1.2, Table- 3 (Carbon )	-
Cl.7.1.2, Table- 3 (Sulphur)	-
Cl.7.1.2, Table- 3 (Phosphorus)	-
Cl.7.1.2, Table- 3 (Manganese)	-
Cl.7.1.2, Table- 3 (Silicon)	-
Cl.7.1.2, Table- 3 (Aluminium)	-
Cl.7.1.2, Table- 3 (Chromium)	-
Cl.7.1.2, Table- 3 (Nickel)	-
Cl.7.1.2, Table- 3 (Molybdenum)	-
Cl.7.1.2, Table- 3 (Copper)	-
Cl.7.1.2, Table- 3 (Vanadium)	-
Cl.7.1.2, Table- 3 (Titanium)	-
Cl.7.1.2, Table- 3 (Zinc)	-
Cl.7.1.2, Table- 3 (Tungsten)	-
Cl.7.1.2, Table- 3 (Nitrogen)	-
Cl 4 (Classification and designation)	-
Cl 7.5 (Surface quality)	-
Cl 7.6 (Shape, dimensions and tolerances)	-
Cl 7.6 (Shape, dimensions and tolerances)	-
Cl 7.6 (Shape, dimensions and tolerances)	-
Cl 7.6 (Shape, dimensions and tolerances)	-
Cl 7.6 (Shape, dimensions and tolerances)	-

Partial

-
Steel Designation as per Table 3 of IS 17111 may please be declared. Sample Size 5 pcs of 5x5 cm having dia> 3mm and thickness > 0.8 mm; EXCLUDING cl 7.2 microstruct, ii] non metallic inclusions

8932

BIS, Central Laboratory (CL)

IS 1993 (2018)

Cold - Reduced tinmill products - Electrolytic tinplate (Fifth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 5 (Classification)	-
Cl 6.1 (Designation)	-
Cl 10 (Tolerance on dimension and shape )	-
Cl 7.3 (Finish)	-
Cl 7.4 (Passivation and oiling)	-
Cl 7.5 (Imperfections)	-
Cl 8 (Tin Coating mass )	-
Cl 9.2 (Hardness requirement )	-
Cl 9.3 (Tensile requirement )	-

Partial

-
Sample Size 5 pcs of 5x5 cm having dia> 3mm and thickness > 0.8 mm; EXCLUDING for material < 0.8 mm thikcness only C& S can be tested. Test facility not available for Tin Coating; i] cl 8 tin coating mass, ii] cl 6.3 passivation and oiling, iii] cl 9 proof strength

8933

BIS, Central Laboratory (CL)

IS 10080 (1982)

Specification for vibration machine for casting standard cement mortar cubes

Rs.3300.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.4, table 2 (DIMENSIONS AND TOLERANCES)	-
(Cl 3.4.1 of IS 10080 & 5.1 of IS:10086) (Other Requirements (Construction))	-
(Cl 5.2, IS:10086) (Special Requirements for cube moulds)	-
(Cl 5.3,IS:10086) (Arrangement for Fastening/Clamping)	-

Partial

-
-

8934

BIS, Central Laboratory (CL)

IS 4808 (1982)

Specification for pyrethrum emulsifiable concentrates (First Revision)

Rs 6150/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2.2.1 (Description)	-
2.2.4 (Flash Point)	-
2.2.3 (Cold test)	-
2.2.5 (Emulsion Stability)	-
2.3 (Total Pyrethrin Content )	-
2.2.6 (Heat Stability)	-
2.2.3 (Cold test)	-
2.1 (Constituents )	-

Partial

-
EXCLUDING Cl. 2.2.2 & Cl. 2.3 Identity test & Total Pyrethrin Content;

8935

BIS, Central Laboratory (CL)

IS 9665 (1981)

Specification for propoxur emulsifiable concentrates

Rs.5100/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2.2.1 (Description)	-
2.2.2 (Cold Test)	-
2.2.3 (Flash Point)	-
2.2.4 (Emulsion Stability)	-
2.3.2 (Acidity)	-
2.3.1 (Propoxur Content, NV upto 9)	-
2.3.1 (Propoxur Content, NV above 9 and below 50)	-
2.3.1 (Propoxur Content, NV above 50)	-

Complete

-
-

8936

BIS, Western Regional Laboratory (WRL)

IS 3062 (1995)

Crop protection equipment - Rocker sprayer - Specification (Fourth Revision)

Rs. 4950/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
(F-6) (Workmanship and Finish)	-
Cl. 6.5 (Other requiremnt)	-
(F-4) (Other requiremnt)	-
(F-3) (Performance Requirement)	-
(F-3) (Performance Requirement)	-
(F-3) (Performance Requirement)	-
(Table 1 of IS 3652) (Material)	-
( F-11) (Type)	-
( F-11) (Marking)	-
( D - 4) (Other requirment)	-
( D - 3) (Dimensions)	-
(D-2 and Table 1 of IS3652) (Material)	-
(D-1) (Types)	-
(D-5) (Marking)	-
( C - 9 ) (ii) Leakage and Reliability test)	-
( C - 8 ) (Tests (C-7) i) Strength test)	-
( C - 6) (Operating Trigger/ Knob)	-
( C - 5 ) (Gaskets )	-
(C-4) (End Fittings i) Inlet ii) outlet)	-
( C - 2) (Dimensions)	-
Table 1 of IS 3652 ) (Material)	-
(C-10) (Types ( C-1 ))	-
(C-10) (Marking)	-
(Cl. 9.1) (MARKING)	-
(Cl.8) (Workmanship and Finish)	-
(Cl. 7) (Other requirements)	-
(Cl. 6.11) (Total Mass)	-
(Cl. 6.10) (Gaskets)	-
4.8.2 (c) test for hose connection)	-
4.8.2 (b) For cut- off device )	-
4.8.2 ( Hose Connections a) For delivery spout )	-
(Cl. 6.9 , 4.8.1 ) (Discharge Line, Delivery hose)	-
4.7.3 ( b) For Strainer Body)	-
4.7.3 ( Hose Connections a) For Suction spout)	-
4.7.2 ( Strainer Assembly a) stainer b) Stainer body)	-
(Cl. 6.8) & 4.7.1 (Suction Line, and suction hose)	-
4.6.2 ( Delivery Spout)	-
4.6.1 & 6.7 (Suction , delivery spout and suctionspout)	-
Cl. 6.5 (Pressure Chamber)	-
Cl. 6.5 (Pressure Chamber)	-
Cl. 6.5 (Pressure Chamber)	-
4.4.4 ( Piston Rod)	-
4.4.4 ( Piston Rod)	-
4.4.3 (Piston Spreaded)	-
4.4.2 ( Piston)	-
Cl. 6.4 and 4.4.1 (Pump and pump cylinder)	-
Cl. 6.4 and 4.4.1 (Pump and pump cylinder)	-
Cl. 6.4 and 4.4.1 (Pump and pump cylinder)	-
Cl. 6.4 and 4.4.1 (Pump and pump cylinder)	-
Cl. 6.3 (Handle Lever and Extension )	-
Cl. 6.3 (Handle Lever and Extension )	-
Cl. 6.3 (Handle Lever and Extension )	-
Cl. 6.2 (Frame)	-
Cl. 6.1 (Construction Requirment , base board)	-
Cl. 5.3 (Endurance Test)	-
Cl. 5.2 (Volumetric Efficiency)	-
5 & 5.1 (Performance requirement, Discharge rate)	-
4.8.2 (Cut-Off Device and , spray lance/ spray Gun)	-
4.8.2 (Nozzle)	-

Complete

-
-

8937

BIS, Central Laboratory (CL)

IS 17154 (2019)

Battery operated motorized tricycle - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
(Cl. 8.5) (Test For Finish :)	-
(Cl. 8.3) (Static Load Test :)	-
(Cl. 8.2) (Manoeuverability :)	-
(Cl. 8.1) (Raod Test :)	-
(Cl 7) (FINISH : All the metallic parts other than those mentioned in Cl 6.1 shall have a smooth finish & shall be Zinc plated accordance with Grade No. 1 of IS 1573.)	-
(Cl. 6.14) (Accessories : The following items shall be furnished as accessories:)	-
(Cl. 6.14) (Accessories : The following items shall be furnished as accessories:)	-
(Cl. 6.14) (Accessories : The following items shall be furnished as accessories:)	-
(Cl. 6.14) (Accessories : The following items shall be furnished as accessories:)	-
(Cl. 6.14) (Accessories : The following items shall be furnished as accessories:)	-
(Cl. 6.14) (Accessories : The following items shall be furnished as accessories:)	-
(Cl. 6.14) (Accessories : The following items shall be furnished as accessories:)	-
(Cl. 6.13) (Suitable means shall be provided on the under side of the tricycle for keeping the crutches or walking stick securely and conveniently.)	-
(Cl. 6.12) (Lubrication:)	-
(Cl. 6.11) (Armrest :)	-
(Cl. 6.11) (Armrest :)	-
(Cl. 6.10) (A tool-cum-accessories box shall be provided behind the seat. )	-
(Cl. 6.9) (Rear Wheel Hub:)	-
(Cl. 6.9) (Rear Wheel Hub:)	-
(Cl. 6.8) (Front Wheel Hub:)	-
(Cl. 6.7) (Brakes :)	-
(Cl. 6.6) (Mudguards :)	-
(Cl. 6.6) (Mudguards :)	-
(Cl. 6.6) (Mudguards :)	-
(Cl. 6.6) (Mudguards :)	-
(Cl. 6.6) (Mudguards :)	-
(Cl. 6.6) (Mudguards :)	-
(Cl. 6.6) (Mudguards :)	-
(Cl. 6.5) (Wheel Rims : )	-
(Cl. 6.5) (Wheel Rims : )	-
(Cl. 6.5) (Wheel Rims : )	-
(Cl. 6.5) (Wheel Rims : )	-
(Cl. 6.5) (Wheel Rims : )	-
(Cl. 6.5) (Wheel Rims : Spoke- holes shall be properly punched or drilled.)	-
(Cl. 6.5) (Wheel Rims :The rims shall be free from pitting or uneven plating. )	-
(Cl. 6.5) (Wheel Rims :The wheel rims shall be size 24" for front wheel & 26" for rear wheel conforming to IS 624 : 2003.)	-
(Cl. 6.4) (Tyres & Tubes: Tyres used shall be 24'' size for front wheel and 26" for rear wheels, tyres conforming to IS 2414 While tubes shall conform to IS 2415.)	-
(Cl. 6.3) (Driving Mechanisum:)	-
(Cl. 6.2) (Steering Handle Bar: )	-
(Cl. 6.2) (Steering Handle Bar: )	-
(Cl. 6.2) (Steering Handle Bar: )	-
(Cl.6.1) (Frame : )	-
(Cl.6.1) (Frame : )	-
(Cl.6.1) (Frame : )	-
(Cl 4)Table 1 & Fig 1 (Height of rear wheel supporting frame )	-
(Cl 4)Table 1 & Fig 1 (Back height from seat, )	-
(Cl 4)Table 1 & Fig 1 (Seat width, )	-
(Cl 4)Table 1 & Fig 1 (Seat length, )	-
(Cl 4)Table 1 & Fig 1 (Armrest height from seat, )	-
(Cl 4)Table 1 & Fig 1 (Clearance of footrest from ground, )	-
(Cl 4)Table 1 & Fig 1 (Length of foot rest, )	-
(Cl 4)Table 1 & Fig 1 (Width of foot rest, )	-
(Cl 4)Table 1 & Fig 1 (Overall height, )	-
(Cl 4)Table 1 & Fig 1 (Overall width, )	-
(Cl 4)Table 1 & Fig 1 (Overall length, )	-

Partial

-
-

8938

BIS, Eastern Regional Laboratory (ERL)

IS 9738 (2003)

Polyethylene bags for general purposes - Specification (Second Revision)

All type and thickness

Rs. 1500/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.2 (Classification)	-
5.0 (Structure & Shape)	-
7.2 (Length)	-
7.2,Table 6 (Width)	-
7.3 (Thickness)	-
8.1 (Appearance)	-
8.1.1 (Printing Bags)	-
8.2 (Water Leak Test)	-
8.3 (Printing Ink Adhesion Test)	-
8.4 (Drop Test)	-
10 (Packing and Marking)	-
6.0 (Material)	-

Partial

-
Type, length, width and thickness to be declared.

8939

BIS, Southern Regional Laboratory (SRL)

IS 2112 (2014)

Silver and silver alloys, jewellery/ artefacts - Fineness and marking - Specification (Third Revision)

upto 990 ppt

Rs.1400.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1 (Fineness)	-
5 (Cadmium)	-
5 (Lead)	-

Complete

-
10 gm, min.

8940

BIS Patna Branch Laboratory (PBL)

IS 4984 (2016)

Polyethylene pipes for water supply - Specification (Fifth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1.4 (PIPE DESCRIPTION)	-
6.1.3 (PIPE DESCRIPTION)	-
6, 6.1.2 (PIPE DESCRIPTION)	-
6, 6.1.1 (PIPE DESCRIPTION)	-
6, 6.1 (PIPE DESCRIPTION)	-
6.2.1 (6.1.1 Identification Stripes)	-
6.2 (Colour)	-
7.2 (Length)	-
7.4 table -3 & 4 (6.1 Dimensions)	-
7.4.1.2 (Ovality)	-
8.2 (Longitudinal Reversion Test)	-
8.6 (Overall migration)	-
Cl 8.3 (Carbon Black Content)	-
Cl 8.3 (Carbon Black Dispersion)	-
8.4 ( Melt Flow Rate)	-
8.7 (Density)	-

Partial

-
All test facilities are available as per the IS except- i. Hydraulic Characteristics (Clause 8.4) ii. Oxidation Induction TimeTest (Clause 8.5) Note-Overall Migration test facility can be done only for Priority Samples (Clause 8.6)

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number