BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15123 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

14071

BIS, Central Laboratory (CL)

None

IS 4454 : Part 2 (2001)

Steel wire for mechanical springs - Specification february 2001: Part 2 oil hardened and tempered steel wire (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 8 (Workmanship)	-
Cl 9 (Diameter & Difference Between Two Reading On Any Two Diameters)	-
Cl 10 (Tensile Test, Wrap Test, Torsion Test, Bend Test, Coiling and Stretching, Cast of wire, Deep Etch Test, Decarburization Test, Coating and Surface Finish & Eddy Current Test)	-
7.1, 7.2 (carbon)	-
7.1, 7.2 (sulphur)	-
7.1, 7.2 (phosphorus)	-
7.1, 7.2 (manganese)	-
7.1, 7.2 (silicon )	-
7.1, 7.2 (copper)	-
7.1, 7.2 (Chromium)	-
7.1, 7.2 (Vanadium)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm;

14072

BIS, Central Laboratory (CL)

None

IS 398 : Part 1 (1996)

Aluminium conductors for overhead transmission purposes - Specification: Part 1 aluminium stranded conductors (Third Revision)

Rs.1600/- for 7 strands, Rs.3750/- for 19 strands View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
12.2, Table-1 (Measurement of diameter of individual aluminium wire)	-
12.3, Table-1 (Breaking load before stranding)	-
12.3, Table-1 (Breaking load after stranding)	-
12.4 (Wrapping test)	-
12.5, Table 1 (Resistance test)	-
12.6, Table 3 (Measurement of lay ratio)	-
9.3 (Stranding)	-
6 (Freedom from defects)	-

-
-

14073

BIS, Central Laboratory (CL)

None

IS 2721 (2003)

Galvanized steel chain link fence fabric - Specification (Second Revision)

6910 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.6.1, 6.2, Table 1 (Mesh Size)	-
Cl.6.3, Table 1 (Width of the fabric)	-
Cl.6.3, Table 1 (Length of the fabric)	-
Cl.6.1, 6.2, Table 1 (Nominal Dia of Mesh wire)	-
Cl. 7.2 and Table 1 (Line Wire (Diameter))	-
Cl. 7.2 and Table 1 (Line Wire (Number of wires))	-
Cl.8 (Chain link fence fabric(Mass of zinc coating)- IS 6745)	-
Cl.9.1.1 (Tensile test of mesh and line wires- IS 1608)	-
Cl.9.1.2 (Wrapping test of mesh and line wires-IS 1755)	-
Cl.9.1.4 (Bend test of mesh and line wires- IS 1608)	-
Cl.9.1.3 (Twist test of mesh and line wires-IS 1717)	-
Cl.9.2 (Line wire (Mass of zinc coating)- IS 6745)	-
Cl.5 (Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl.5 (Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl.5 (Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl.5 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl.5 (Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl.5 (Aluminium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl.5 (Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl.5 (Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl.5 (Titanium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm;

14074

CIPET, Hyderabad

6111634

IS 710 (2010)

Marine plywood - Specification (Second Revision)

20050 View breakup
Rs.19675/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1(WORKMANSHIP AND FINISH )	-	300	25% DISCOUNT ON TEST CHARGES FOR BIS
7.2(WORKMANSHIP AND FINISH )	-	300	25% DISCOUNT ON TEST CHARGES FOR BIS
7.3(WORKMANSHIP AND FINISH )	-	300	25% DISCOUNT ON TEST CHARGES FOR BIS
7.5(WORKMANSHIP AND FINISH )	-	300	25% DISCOUNT ON TEST CHARGES FOR BIS
6.1(DIMENSIONS)	-	500	25% DISCOUNT ON TEST CHARGES FOR BIS
6.1(DIMENSIONS)	-	500	25% DISCOUNT ON TEST CHARGES FOR BIS
6.2(DIMENSIONS)	-	500	25% DISCOUNT ON TEST CHARGES FOR BIS
9.1.1(MOISTURE CONTENT)	-	900	25% DISCOUNT ON TEST CHARGES FOR BIS
9.1.2 , 9.1.2.1(Glue Adhesion in Dry State)	-	1600	25% DISCOUNT ON TEST CHARGES FOR BIS
9.1.2 , 9.1.2.2(Glue Adhesion in Dry State)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
9.1.3 , 9.1.3.1.1(Water resistance test)	-	2100	25% DISCOUNT ON TEST CHARGES FOR BIS
9.1.3 , 9.1.3.1.2(Water resistance test)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
9.1.4(Tensile strength)	-	2700	25% DISCOUNT ON TEST CHARGES FOR BIS
9.1.5(Mycological test)	-	3200	25% DISCOUNT ON TEST CHARGES FOR BIS
9.1.6 (Table 3)(Static bending strength)	-	4900	25% DISCOUNT ON TEST CHARGES FOR BIS
9.1.7 (Table 4)(Wet bending strength)	-	4900	25% DISCOUNT ON TEST CHARGES FOR BIS
9.1.8(Retention of preservative)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS

23 Feb, 2027

-
Testing charges has been fixed for a period of two years w.e.f. 29.01.2019 i.e. up to 28.01.2021.

14075

BIS, Eastern Regional Laboratory (ERL)

None

IS 210 (2009)

Grey iron castings - Specification (First Revision)

For all grades except tests mentioned in remarks

Rs.2700.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.1 (WORKMANSHIP AND FINISH)	-
10.1 (FREEDOM FROM DEFECTS)	-
13 (SIZE OF TEST BARS-Length)	-
13 (SIZE OF TEST BARS-Diameter)	-
15, Table 3 (TENSIL.E TEST- IS 1608 Part1 )	-
16, Table 3 (Hardness Test)	-
6 (Chemical Composition(chemical composition shall be as agreed to between the purchaser and the manufacturer.))	-
9 (Microstructure)	-
17,Annex B (TRANSVERSE TEST)	-
18 (HYDROSTATIC TEST)	-
6 (Chemical Composition(chemical composition shall be as agreed to between the purchaser and the manufacturer.))	-
Cl-6 (Phosprorus (P) - IS 12308 ( P-5))	-
16, Table 3 (Hardness Test)	-

-
Chem: only available for Phosphorous as per Cl. 6.1) Mech- Excluding hydrostatic test and transverse test. Note: For Hardness test, provide sample greater than 10 mm thickness. If separate test specimens are not sent for Tensile and Hardness, the hardness will be conducted on the same test bar/specimen.

14076

IDMA LABORATORIES LIMITED, PANCHKULA

9123236

IS 2785 (1979)

Specification for natural cheese (Hard Variety), processed cheese, processed cheese spread and soft cheese (First Revision)

2000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.3.1(Appearance)	-	100	5% discount to BIS
3.3.2(Odour and Flavour)	-	100	5% discount to BIS
3.3.3(Texture and Consistency)	-	100	5% discount to BIS
3.3.4- Table 1-i(Moisture- Annex A)	-	300	5% discount to BIS
3.3.4- Table 1-ii(Milk fat ( on dry basis)- Annex B)	-	700	5% discount to BIS
3.3.4- Table 1-iii(Salt ( added sodium chloride)- Annex C)	-	500	5% discount to BIS Note: Reporting charges- Rs/- 200

31 Dec, 2026

-
-

14077

BIS, Patna Branch Laboratory (PBL)

None

IS 8041 (1990)

Rapid hardening portland cement - Specific4tion (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 - Table - 1 i (Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-
5.1 - Table - 1 ii (Ratio of percentage of alumina to that of iron oxide - Cl 4 of IS 4032:1985)	-
5.1 - Table - 1 iii (Insoluble residue - Cl 4.10 of IS 4032:1985)	-
5.1 - Table - 1 iv (Magnesia - Cl 4.8 of IS 4032:1985)	-
5.1 - Table - 1 v (Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-
5.1 - Table - 1 vi (Total loss on ignition - Cl 4.2 of IS 4032:1985)	-
6.1 (Fineness 4031 Part 2)	-
6.2.1 (Expansion by Le Chatelier- 4031 Part 3)	-
6.2.1.1 (Expansion after aeration - 4031 Part 3)	-
6.2.1 (Expansion by Autoclave- 4031 Part 3)	-
6.2.1.1 (Expansion after aeration- 4031 Part 3)	-
6.3 a) (Setting Time Initial- 4031 Part 5)	-
6.3 b) (Setting Time Final- 4031 Part 5)	-
6.4 a) (Compressive Strength At 24 hrs ± 30 minutes - IS 4031 Part 6)	-
6.4 b) (Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-

-
All test facilities are available as per the IS

14078

BIS, Eastern Regional Laboratory (ERL)

None

IS 12330 (1988)

Specificatioon for sulphate resisting Portland cement

Rs.12900/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 - Table - 1 i (Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-
4.1 - Table - 1 i (Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-
4.1 - Table - 1 ii (Insoluble residue - Cl 4.10 of IS 4032:1985)	-
4.1 - Table - 1 ii (Insoluble residue - Cl 4.10 of IS 4032:1985)	-
4.1 - Table - 1 iii (Magnesia - Cl 4.8 of IS 4032:1985)	-
4.1 - Table - 1 iii (Magnesia - Cl 4.8 of IS 4032:1985)	-
4.1 - Table - 1 iv (Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-
4.1 - Table - 1 iv (Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-
4.1 - Table - 1 v (Tricalcium aluminate (C3A) - Cl 4 of IS 4032:1985)	-
4.1 - Table - 1 v (Tricalcium aluminate (C3A) - Cl 4 of IS 4032:1985)	-
4.1 - Table - 1 vi (Tetracalcium alumino ferrite phase plus twice the tricalcium aluminate ( C4AF + 2C3A ) - Cl 4 of IS 4032:1985)	-
4.1 - Table - 1 vi (Tetracalcium alumino ferrite phase plus twice the tricalcium aluminate ( C4AF + 2C3A ) - Cl 4 of IS 4032:1985)	-
4.1 - Table - 1 vii (Total loss on ignition - Cl 4.2 of IS 4032:1985)	-
4.1 - Table - 1 vii (Total loss on ignition - Cl 4.2 of IS 4032:1985)	-
5.1 (Fineness 4031 Part 2)	-
5.2.1 (Expansion by Le Chatelier- 4031 Part 3)	-
5.2.1 (Expansion by Autoclave- 4031 Part 3)	-
5.3 a) (Setting Time Initial- 4031 Part 5)	-
5.5 i) (Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-
5.5 ii) (Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-
5.5 iii) (Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-
5.3 b) (Setting Time Final- 4031 Part 5)	-
5.4 (Salphate Expansion (Optional))	-
5.6 (Transverse Strength - IS 4031 Part 8 (Optional))	-
5.2.1.1 (Expansion after aeration - 4031 Part 3)	-
5.2.1.1 (Expansion after aeration- 4031 Part 3)	-

-
Facility not available for transverse strength test(Optional)

14079

BIS, Patna Branch Laboratory (PBL)

None

IS 15911 (2010)

Structural steel (Ordinary Quality) - Specification

Rs 6750/- For elements other than Table-1: Rs 1004/- pe View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Table-1, 5.1, 8.1 & 8.2 (Carbon: Relevant parts of IS 228 or any other established instrumental/chemical method)	-
Table-1, 5.1, 8.1 & 8.2 (Sulphur: Relevant parts of IS 228 or any other established instrumental/chemical method)	-
Table-1, 5.1, 8.1 & 8.2 (Phosphorous: Relevant parts of IS 228 or any other established instrumental/chemical method)	-
Table-1, 5.1, 8.1 & 8.2 (Manganese: Relevant parts of IS 228 or any other established instrumental/chemical method)	-
Table-1, 5.1, 8.1 & 8.2 (Silicon: Relevant parts of IS 228 or any other established instrumental/chemical method)	-
Table-1, 5.1, 8.1 & 8.2 (Nitrogen: Relevant parts of IS 228 or any other established instrumental/chemical method)	-
7 (Freedom from defects)	-
5 and 10.3.1 (Tensile strength. IS 1608)	-
5 and 10.3.1 (Yield Stress. IS 1608)	-
5 and 10.3.1 (Percentage Elongation. . IS 1608)	-
11.3 ( Bend Test. IS 1599)	-
5 and 10.3.1 (Internal Bend Diameter)	-
Cl 12 of IS 15911 and Table 5.1 of IS 808 (Mass. IS 808)	-
Cl 12 of IS 15911 and Table 2.1 of IS 808 (D)	-
Cl 12 of IS 15911 and Table 2.1 of IS 808 (B)	-
Cl 12 of IS 15911 and Table 2.1 of IS 808 (t)	-
Cl 12 of IS 15911 and Table 2.1 of IS 808 (T)	-
Cl 12 of IS 15911 and Table 2.1 of IS 808 (Flange Slop, Max α , )	-
Cl 12 of IS 15911 and Table 2.1 of IS 808 (R1)	-
Cl 12 of IS 15911 and Table 2.1 of IS 808 (R2)	-

-
All test facilities are available as per the IS except tests for Chromium, Molybdenum, Vanadium, Nickel, Copper, Niobium, Boron, Titanium, Aluminium and Tungsten (Clause 8.2)

14080

BIS, Central Laboratory (CL)

None

IS 9537 : Part 2 (1981)

Specification for conduits for electrical installations: Part 2 rigid steel conduits

Rs 2100/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1 (Marking, IS 9537-2)	-
6.1 (Marking, IS 9537-2)	-
6.1 (Marking, IS 9537-2)	-
6.2 (Marking, IS 9537-2)	-
6.3 (Marking, Cl. 6.4 of IS 9537-1)	-
7.2.1 (Dimensions, (Minimum outside Diameter), IS 9537-2)	-
7.2.2 (Dimensions (Maximum outside Diameter), IS 9537-2)	-
7.3 (Dimensions (Wall thickness), IS 9537-2)	-
7.3.3 (Uniformity of wall thickness, IS 9537-2)	-
8.1 (Construction, Cl. 8 of IS 9537-1)	-
8.2 (Construction, IS 9537-2)	-
9.3 (Mechanical Properties (Compression Test), IS 9537-2)	-

-
-

14081

BIS, Patna Branch Laboratory (PBL)

None

IS 10124 : Part 2 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 2 specific requirements for sockets (Second Revision)

Rs.1800/ View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2.1, Table-1, Fig-1 (Nominal size)	-
3.2.1, Table-1, Fig-1 (B)	-
3.2.1, Table-1, Fig-1 (Minimum wall thickness for working pressure)	-
3.2.1, Table-1, Fig-1 (Plumbing)	-
Clause 3.2.2, and Fig. 2 (Nominal size)	-
Clause 3.2.2, and Fig. 2. (B)	-
Clause 3.2.2, and Fig. 2. (Minimum wall thickness for working pressure)	-
3.2.2, and Fig. 2 (Dimensions of Socket for Elastomeric Sealing Ring Joint)	-

-
All test facilities are available as per the IS except- i. Short Term Hydrostatic Test (Clause 6.2) ii. Effect on Water (Clause 6.3)

14082

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING AND TECHNOLOGY (CIPET):CSTS-BHOPAL

8100534

IS 4148 (1989)

Surgical rubber gloves - Specification (First Revision)

15400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.1(Manufacture)	-	250	Nil
4.1.2(Manufacture)	-	0	Charges already taken
4.1.3(Manufacture)	-	0	Charges already taken
4.1.4(Manufacture)	-	0	Charges already taken
4.2(Dimensions Fig 1 and Table 1)	-	250	Nil
4.2(Dimensions Fig 1 and Table 1)	-	0	Charges already taken
4.2(Dimensions Fig 1 and Table 1)	-	0	Charges already taken
4.2(Dimensions Fig 1 and Table 1)	-	0	Charges already taken
4.2(Dimensions Fig 1 and Table 1)	-	0	Charges already taken
4.2(Dimensions Fig 1 and Table 1)	-	0	Charges already taken
4.2(Dimensions Fig 1 and Table 1)	-	0	Charges already taken
4.3(Thickness)	-	250	Nil
4.4.1(Physical Properties)	-	1350	Test charges Rs. 1100/- plus Rs. 250/ Specimen charges (25% discount is not applicable in specimen charges)
4.4.1(Physical Properties)	-	1350	Test charges Rs. 1100/- plus Rs. 250/ Specimen charges (25% discount is not applicable in specimen charges)
4.4.2(After accelerated aging at 70 + 1OC for 240 h )	-	6000	(25% discount is not applicable in Ageing charges)
4.4.2(After accelerated aging at 70 + 1OC for 240 h )	-	0	Test charges already taken
4.4.3(After heat ageing in autoclave)	-	2500	(25% discount is not applicable in Ageing charges)
4.4.3(After heat ageing in autoclave)	-	0	Charges already taken
4.4.4(Tension Set)	-	1350	Test charges Rs. 1100/- plus Rs. 250/ Specimen charges (25% discount is not applicable in specimen charges)
4.5(pH of Aqueous Extract )	-	750	Nil

31 Dec, 2026

-
Included w.e.f. 27-05-2022.

14083

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING AND TECHNOLOGY (CIPET):CSTS-BHOPAL

8100534

IS 3462 (1986)

Unbacked Flexible Pvc Flooring

19800 View breakup
Rs.17238/- (After 25% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.1(DIMENSIONS AND TOLERANCES-Liaear Dimension-Sheets or Rolls)	-	200	Nil
5.1.2(DIMENSIONS AND TOLERANCES-Liaear Dimension-Tiles)	-	250	Nil
5.2(DIMENSIONS AND TOLERANCES-Thickness)	-	0	Charge already taken in clause no. 5.1.1 (Combined charges)
6. 1(COLOUR AND SURFACE CHARACTERISTICS)	-	250	Nil
7.1-Table 1(iii)(REQUlREMENTS-rile size )	-	0	Charge already taken
7.1-Table 1(iv)(REQUlREMENTS-Dimensional stability )	-	700	Nil
7.1-Table 1(iv)(REQUlREMENTS-Squareness )	-	0	Charge already taken
7.1-Table 1(v)(REQUlREMENTS-Colour fastness to daylight )	-	850	Nil
7.1-Table 1(vi)(REQUlREMENTS-Curling )	-	0	Charge already taken
7.1-Table 1(vii)(REQUlREMENTS-Residual indenration )	-	1400	Nil
7.1-Table 1(viii)(REQUlREMENTS-Flexibility )	-	1500	Nil
7.1-Table 1(ix)(REQUlREMENTS-Resistance to various substances-Scratch width )	-	1100	nil
7.1-Table 1(x)(REQUlREMENTS-Resistance to various substances )	-	0	Charge already taken in clause no. 7.1 (Combined charges)
7.1-Table 1(xi)(REQUlREMENTS-Ply adhesion )	-	1400	Test charges Rs. 1100/- plus Rs. 300/ Specimen charges (25% discount is not applicable in specimen charges)
7.1-Table 1(xii)(REQUlREMENTS-Moisture movernent )	-	700	Nil
7.1-Table 1(xiii)(REQUlREMENTS-Heat ageing and exudation )	-	10100	Test charges Rs. 1100/- plus Rs. 9000/- Conditioning charges (25% discount is not applicable in Conditioning charges)
7.1-Table 1(xiii)(REQUlREMENTS-Elastic product)	-	1350	Test charges Rs. 1100/- plus Rs. 250/ Specimen charges (25% discount is not applicable in specimen charges)

31 Dec, 2026

-
Included w.e.f. 29.06.2017.

14084

BIS, Central Laboratory (CL)

None

IS 4581 (1978)

Specification for phosphorus trichloride, pure and analytical reagent (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Description )	-
3.2, Table 1 and A-2 of IS 4581 (Phosphprus Tricloride ( as PCl3 ) - For Analytical Reagent )	-
3.2, Table 1 and A-2 of IS 4581 (Phosphprus Tricloride ( as PCl3 ) - For Pure grade)	-
3.2, Table 1 and A-3 of IS 4581 (Relative density at 27°C/ 27°C - For all Grade)	-
3.2, Table 1 and A-4 of IS 4581 (Evaporation residue, including PCl5 - For All Grades)	-
3.2, Table 1 and A-5 of IS 4581 (Sulphate ( as SO4) - For Analytical Reagent)	-
3.2, Table 1 and A-6 of IS 4581 (Heavy metals (as Pb), - For Analytical Reagent)	-
3.2, Table 1 and A-7 of IS 4581 (Iron ( as Fe ) - For Analytical Reagent)	-

-
Excluding Clause 4.2 Table 1 (i) Phosphorus trichloride,;

14085

BIS, Eastern Regional Laboratory (ERL)

None

IS 1079 (2017)

Hot rolled carbon steel sheet, plate and strip - Specification (Seventh Revision)

For all grades except tests mentioned in remarks

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 8 (UTM)	-
Cl 10 (Die Press)	-
Cl 12 (Workmanship)	-
Cl 13 (Length, Width & Thickness)	-
Cl 13 (Length, Width & Thickness)	-
Cl 13 (Length, Width & Thickness)	-
6.1 (Carbon %)	-
6.1 (Manganese %)	-
6.1 (Phosphorus %)	-
6.1 (Sulphur %)	-
6.1 (Silicon %)	-
6.1 ( Copper %)	-
6.1 ( Nitrogen%)	-
Cl 8 (UTM)	-
Cl 9 (Press)	-
6.1 ( Aluminium %)	-
6.1 ( Ti)	-
Cl. 7.1, table 3 (Aluminium)	-
Cl. 7.1, table 3 (Niobium)	-
Cl. 7.1, table 3 (Vanadium)	-
Cl. 7.1, table 3 (Titanium)	-
Cl. 7.1, table 3 (Boron)	-
Cl. 7.1, table 3 (Silicon)	-
Cl. 7.1, table 3 (Nitrogen)	-
Cl. 7.1, table 3 (Copper)	-
Cl. 7.1, table 3 (Total microalloying elements(Nb+V+Ti+B))	-

-
-

14086

Ace Test Labs & Metrology Pvt. Ltd., Sonipat

9162826

IS 16242 : Part 1 (2014)

Uninterruptible power systems (UPS): Part 1 general and safety requirements for UPS

108000 View breakup
Rs.108000/- (10% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.6(Power interface)	-	3000	10% Discount for BIS
4.7(Marking & instructions)	-	2000	10% Discount for BIS
5.1(Protection against shock and energy hazards)	-	3000	10% Discount for BIS
5.2(Requirement of auxiliary circuits)	-	5000	10% Discount for BIS
5.3(Protective earthing and bonding)	-	5000	10% Discount for BIS
5.5(Over current and earth fault condition)	-	10000	10% Discount for BIS
5.7(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	10000	10% Discount for BIS
6.1(Wiring, connections and supply)	-	5000	10% Discount for BIS
6.3(Wiring terminals for external power conductors)	-	5000	10% Discount for BIS
7.2(STABILITY)	-	5000	10% Discount for BIS
7.3(MECHANICAL STRENGTH)	-	4000	4000 (each )10% Discount for BIS
7.4(Construction details)	-	5000	10% Discount for BIS
7.5(Resistance to fire)	-	8000	8000 (Each)10% Discount for BIS
7.7(Temperature rise)	-	10000	Rs 10000/- for 10 points, 10% Discount for BIS
8.1(General procision for earth leakage)	-	8000	10% Discount for BIS
8.2(Electric Strength)	-	7000	10% Discount for BIS
8.3(Abnormal operating and fault conditions)	-	8000	10% Discount for BIS
9.0(Connection to telecommunication networks)	-	5000	10% Discount for BIS

14 Nov, 2027

-
Only for IP(0-4)(5-6) For UPS/Inverter up to 5KVA), UPS < =10 KVA Excluding: Cl. 4.5/1.5 of RD Components - Cl. 5.6/2.8 of RD Safety Interlocks Cl. 2.10.5.4 & Annex U of RD Semiconductor Devices Cl.2.10.6 PCB material, Cl. 2.10.5.11 Insulation in wound components, CL.7.6 & Annex-M Ventilation of battery Compartment, Annex-L.5 Non linear Loads, Annex-I.5 Solid state backfeed protection Annex-H /Table Protection against Ingress of foreign objects

14087

BIS, Central Laboratory (CL)

None

IS 4505 (2015)

Sodium formaldehyde sulphoxylate - Specification (First Revision)

- View breakup
Testing charges = 11.5 x 300 + 9 x 9 + 950 = Rs. 4481/- Testing charges for keeping quality = Rs. 4331/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl no 4.2 (Description )	-
Cl no 4.3 [ Table 1, Sl no.(i) ] Annex A-2 Grade-1 (Sodium formaldehyde sulphoxylate dihydrate (NaHSO2.CH2O.2H2O))	-
Cl no 4.3 [ Table 1, Sl no.(i) ] Annex A-2 Grade-2 (Sodium formaldehyde sulphoxylate dihydrate (NaHSO2.CH2O.2H2O))	-
Cl no 4.3 [ Table 1, Sl no.(ii) ] Annex A-2 Grade-1 & Grade 2 (Sodium formaldehyde bisulphate (NaHSO3.CH2O.H2O))	-
Cl no 4.3 [ Table 1, Sl no.(iii) ] Annex A-2 Grade-1 & Grade 2 (Sodium sulphite (Na2SO3))	-
Cl no 4.3 [ Table 1, Sl no.(iv) ] Annex A-3 Grade-1 & Grade 2 (pH (of 1 percent solution))	-
Cl no 4.3 [ Table 1, Sl no.(v) ] Annex A-4 Grade-1 (Iron (as Fe))	-
Cl no 4.3 [ Table 1, Sl no.(v) ] Annex A-4 Grade-2 (Iron (as Fe))	-
Cl no 4.3 [ Table 1, Sl no.(vi) ] Ref to IS 12074 Grade-1 & Grade 2 (Lead (as Pb))	-
Cl no 4.3 [ Table 1, Sl no.(vii) ] Annex A-5 Grade-1 & Grade 2 (Copper (as Cu))	-
Cl no 4.3 [ Table 1, Sl no.(viii) ] Annex A-6 Grade-1 (Zinc (as Zn))	-
Cl no 4.3 [ Table 1, Sl no.(viii) ] Annex A-6 Grade-2 (Zinc (as Zn))	-

-
-

14088

BIS, Eastern Regional Laboratory (ERL)

None

IS 1989 : Part 1 (1986)

Specification for leather safety boots and shoes: Part 1 for miners (Fourth Revision)

For all sizes except test mentioned in remarks

Rs 5100/- for safety boots, Rs.4500/- safety shoes View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (a) (Marking)	-
4.1 (b) (Marking)	-
4.1 (c) (Marking)	-
4.1 (d) (Marking)	-
4.1 (e) (Marking)	-
7.1 (Design)	-
10.1 (Finish)	-
10.3 (Finish)	-
10.4 (Finish)	-
11.1 (Mass Boots with Leather Sole and Heel)	-
11.2 (Mass Boots with Rubber Sole and Heel)	-
12 (Performance test)	-
13 (Design)	-
16.1 (Finish)	-
16.2 (Finish)	-
16.3 (Finish)	-
16.4 (Finish)	-
17.1 (Mass Shoes with Leather Sole and Heel)	-
17.2 (Mass Shoes with Rubber Sole and Heel)	-
18 (Performance test)	-

-
Mech- 2 pairs, Chem-2 pairs

14089

BIS, Central Laboratory (CL)

None

IS/IEC 60898 : PART 1 (2015)

Electrical accessories - Circuit - Breakers for overcurrent protection for household and similar installations: Part 1 circuit - Breakers for a.c. operation (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.2 (Classification, IS 60898-1)	-
4.3 (Classification, IS 60898-1)	-
4.4 (Classification, IS 60898-1)	-
4.5 (Classification, IS 60898-1)	-
4.5.1 (Classification, IS 60898-1)	-
4.5.2 (Classification, IS 60898-1)	-
4.6 (Classification, IS 60898-1)	-
4.7 (Classification, IS 60898-1)	-
6 (Marking and other product information, IS 60898-1)	-
6 (Marking and other product information, IS 60898-1)	-
6 (Marking and other product information, IS 60898-1)	-
6 (Marking and other product information, IS 60898-1)	-
6 (Marking and other product information, IS 60898-1)	-
6 (Marking and other product information, IS 60898-1)	-
6 (Marking and other product information, IS 60898-1)	-
8.1.1 (General, IS 60898-1)	-
8.1.2 (Mechanism, IS 60898-1)	-
8.1.2 (Mechanism, IS 60898-1)	-
8.1.2 (Mechanism, IS 60898-1)	-
8.1.2 (Mechanism, IS 60898-1)	-
8.1.2 (Mechanism, IS 60898-1)	-
8.1.2 (Mechanism, IS 60898-1)	-
8.1.2 (Mechanism, IS 60898-1)	-
8.1.3 (Clearances and creepage distances, IS 60898-1)	-
8.1.3 (Clearances and creepage distances, IS 60898-1)	-
8.1.3 (Clearances and creepage distances, IS 60898-1)	-
8.1.3 (Clearances and creepage distances, IS 60898-1)	-
8.1.3 (Clearances and creepage distances, IS 60898-1)	-
8.1.3 (Clearances and creepage distances, IS 60898-1)	-
8.1.3 (Clearances and creepage distances, IS 60898-1)	-
8.1.3 (Clearances and creepage distances, IS 60898-1)	-
8.1.3 (Clearances and creepage distances, IS 60898-1)	-
8.1.3 (Clearances and creepage distances, IS 60898-1)	-
8.1.3 (Clearances and creepage distances, IS 60898-1)	-
8.1.3 (Clearances and creepage distances, IS 60898-1)	-
8.1.3 (Clearances and creepage distances, IS 60898-1)	-
8.1.3 (Clearances and creepage distances, IS 60898-1)	-
8.1.4.1 (Reliability of Screws current carrying parts and connections IS 60898-1)	-
8.1.4.2 (Reliability of Screws current carrying parts and connections IS 60898-1)	-
8.1.4.3 (Reliability of Screws current carrying parts and connections IS 60898-1)	-
8.1.4.4 (Reliability of Screws current carrying parts and connections IS 60898-1)	-
8.1.5.1 (Reliability of terminals for external conductors, IS 60898-1)	-
8.1.5.2 (Reliability of terminals for external conductors, IS 60898-1)	-
8.1.5.3 (Reliability of terminals for external conductors, IS 60898-1)	-
8.1.5.4 (Reliability of terminals for external conductors, IS 60898-1)	-
8.1.5.5 (Reliability of terminals for external conductors, IS 60898-1)	-
8.1.5.6 (Reliability of terminals for external conductors, IS 60898-1)	-
8.1.5.7 (Reliability of terminals for external conductors, IS 60898-1)	-
8.1.5.8 (Reliability of terminals for external conductors, IS 60898-1)	-
8.1.5.9 (Reliability of terminals for external conductors, IS 60898-1)	-
8.1.5.10 (Reliability of terminals for external conductors, IS 60898-1)	-
8.1.5.11 (Reliability of terminals for external conductors, IS 60898-1)	-
8.1.5.12 (Reliability of terminals for external conductors, IS 60898-1)	-
8.2 (Protection against Electric Shock, IS 60898-1)	-
8.3.3 (Isolating capability, IS 60898-1)	-
8.4 (Temperature-rise, IS 60898-1)	-
8.4 (Temperature-rise, IS 60898-1)	-
8.6 (Automatic operation, IS 60898-1)	-
8.1 (Resistance to heat, IS 60898-1)	-
8.11 (Resistance to abnormal heat and to fire, IS 60898-1)	-
8.12 (Resistance to rusting, IS 60898-1)	-
8.13 (Power loss, IS 60898-1)	-
9.3 (Test of indelibility of marking, IS 60898-1)	-
9.4 (Test of reliability of screws, current-carrying parts and connections, IS 60898-1)	-
9.5.1 (Tests of reliability of screw-type terminals for external copper conductors, IS 60898-1)	-
9.5.2 (Tests of reliability of screw-type terminals for external copper conductors, IS 60898-1)	-
9.5.2 (Tests of reliability of screw-type terminals for external copper conductors, IS 60898-1)	-
9.5.3 (Tests of reliability of screw-type terminals for external copper conductors, IS 60898-1)	-
9.5.4 (Tests of reliability of screw-type terminals for external copper conductors, IS 60898-1)	-
9.6 (Test of protection against electric shock, IS 60898-1)	-
9.7.1 (Test of protection against electric shock, IS 60898-1)	-
9.7.2 (Test of protection against electric shock, IS 60898-1)	-
9.7.3 (Test of protection against electric shock, IS 60898-1)	-
9.7.4 (Test of protection against electric shock, IS 60898-1)	-
9.7.5.2 (Test of protection against electric shock, IS 60898-1)	-
9.8 (Test of temperature-rise and measurement of power loss, IS 60898-1)	-
9.8 (Test of temperature-rise and measurement of power loss, IS 60898-1)	-
9.8 (Test of temperature-rise and measurement of power loss, IS 60898-1)	-
9.8.5 (Test of temperature-rise and measurement of power loss, IS 60898-1)	-
9.10.2 (Test of tripping characteristic, IS 60898-1)	-
9.10.3 (Test of tripping characteristic, IS 60898-1)	-
9.10.4 (Test of tripping characteristic, IS 60898-1)	-
9.10.5 (Test of tripping characteristic, IS 60898-1)	-
8.1.3 (Clearances and creepage distances, IS 60898-1)	-
8.1.3 (Clearances and creepage distances, IS 60898-1)	-
8.1.3 (Clearances and creepage distances, IS 60898-1)	-
8.1.4.1 (Reliability of Screws current carrying parts and connections IS 60898-1)	-
8.1.4.2 (Reliability of Screws current carrying parts and connections IS 60898-1)	-
8.1.4.3 (Reliability of Screws current carrying parts and connections IS 60898-1)	-
8.1.4.4 (Reliability of Screws current carrying parts and connections IS 60898-1)	-
8.1.5.1 (Reliability of terminals for external conductors, IS 60898-1)	-
8.1.5.2 (Reliability of terminals for external conductors, IS 60898-1)	-
8.1.5.3 (Reliability of terminals for external conductors, IS 60898-1)	-
8.1.5.4 (Reliability of terminals for external conductors, IS 60898-1)	-
8.1.5.5 (Reliability of terminals for external conductors, IS 60898-1)	-
8.1.5.6 (Reliability of terminals for external conductors, IS 60898-1)	-
8.1.5.7 (Reliability of terminals for external conductors, IS 60898-1)	-
8.1.5.8 (Reliability of terminals for external conductors, IS 60898-1)	-
8.1.5.9 (Reliability of terminals for external conductors, IS 60898-1)	-
8.1.5.10 (Reliability of terminals for external conductors, IS 60898-1)	-
8.1.5.11 (Reliability of terminals for external conductors, IS 60898-1)	-
8.1.5.12 (Reliability of terminals for external conductors, IS 60898-1)	-
8.2 (Protection against Electric Shock, IS 60898-1)	-
8.3.3 (Isolating capability, IS 60898-1)	-
8.4 (Temperature-rise, IS 60898-1)	-
8.4 (Temperature-rise, IS 60898-1)	-
8.6 (Automatic operation, IS 60898-1)	-
8.1 (Resistance to heat, IS 60898-1)	-
8.11 (Resistance to abnormal heat and to fire, IS 60898-1)	-
8.12 (Resistance to rusting, IS 60898-1)	-
8.13 (Power loss, IS 60898-1)	-
9.3 (Test of indelibility of marking, IS 60898-1)	-
9.4 (Test of reliability of screws, current-carrying parts and connections, IS 60898-1)	-
9.5.1 (Tests of reliability of screw-type terminals for external copper conductors, IS 60898-1)	-
9.5.2 (Tests of reliability of screw-type terminals for external copper conductors, IS 60898-1)	-
9.5.2 (Tests of reliability of screw-type terminals for external copper conductors, IS 60898-1)	-
9.5.3 (Tests of reliability of screw-type terminals for external copper conductors, IS 60898-1)	-
9.5.4 (Tests of reliability of screw-type terminals for external copper conductors, IS 60898-1)	-
9.6 (Test of protection against electric shock, IS 60898-1)	-
9.7.1 (Test of protection against electric shock, IS 60898-1)	-
9.7.2 (Test of protection against electric shock, IS 60898-1)	-
9.7.3 (Test of protection against electric shock, IS 60898-1)	-
9.7.4 (Test of protection against electric shock, IS 60898-1)	-
9.7.5.2 (Test of protection against electric shock, IS 60898-1)	-
9.8 (Test of temperature-rise and measurement of power loss, IS 60898-1)	-
9.8 (Test of temperature-rise and measurement of power loss, IS 60898-1)	-
9.8 (Test of temperature-rise and measurement of power loss, IS 60898-1)	-
9.8.5 (Test of temperature-rise and measurement of power loss, IS 60898-1)	-
9.10.2 (Test of tripping characteristic, IS 60898-1)	-
9.10.3 (Test of tripping characteristic, IS 60898-1)	-
9.10.4 (Test of tripping characteristic, IS 60898-1)	-
9.10.5 (Test of tripping characteristic, IS 60898-1)	-

-
Excluding 1. 28 days test , 2.Mechanical and Electrical endurance Test, 3. Short circuit test 4. Tripping test at rated voltage, 5. Mechanical shock test, 6. Impact test, 7. Verification of insulation resistance against Impulse Voltage.

14090

BIS, Eastern Regional Laboratory (ERL)

None

IS 362 (1991)

Parliament Hinges -specification

For all types except tests mentioned in remarks

Rs. 2250/- and material testing charges as per relevant View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3 (Type)	-
5.1-able 2 (Dlmenslons for Aluminium Alloy Parliament Hinges-Size)	-
7.1 (FINISH)	-

-
Facility not available for Al,V)

14091

BIS, Southern Regional Laboratory (SRL)

None

IS 1784 (2020)

Screwed Closures for Drums — Specification ( Fourth Revision )

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6 (Dimensions-Steel flange- d1)	-
6 (Dimensions-Steel flange- d2)	-
6 (Dimensions-Steel flange- d3)	-
6 (Dimensions-Steel flange- d4)	-
6 (Dimensions-Steel flange- s1)	-
6 (Dimensions-Steel flange- t1)	-
6 (Dimensions-Flange Gasket- wd)	-
6 (Dimensions-Flange Gasket-ww)	-
6 (Dimensions-Flange Gasket-wt)	-
6 (Dimensions-Steel Bung- d1)	-
6 (Dimensions-Steel Bung- p1)	-
6 (Dimensions-Steel Bung- p2)	-
6 (Dimensions-Steel Bung- p3)	-
6 (Dimensions-Flange Gasket- wd)	-
6 (Dimensions-Bung Gasket- ww)	-
6 (Dimensions-Bung Gasket- wt)	-
6 (Dimensions-Capseals- d1)	-
6 (Dimensions-Capseals- d2)	-
6 (Dimensions-Capseals- h1)	-
6 (Dimensions-Capseals- h2)	-
6 (Dimensions-Capseals- w1)	-
6 (Dimensions-Tag Ring- d1)	-
6 (Dimensions-Tag Ring- d2)	-
6 (Dimensions-Tag Ring- d3)	-
6 (Dimensions-Tag Ring- d4)	-
6 (Dimensions-Tag Ring- d5)	-
6 (Dimensions-Tag Ring- h1)	-
6 (Dimensions-Zinc Bung- d1)	-
6 (Dimensions-Zinc Bung- d2)	-
6 (Dimensions-Zinc Bung- d3)	-
6 (Dimensions-Zinc Bung- p1)	-
7 (Finish)	-
8.1 (Interchangeability)	-

-
" 6 Nos. Excluding except air pressure test, torque test for steel bungs, curling & thread,chemical tests

14092

BIS, Eastern Regional Laboratory (ERL)

None

IS 10124 : Part 1 (2009)

Fabricated PVC-U Fittings for Potable Water Supplies - Specification Part 1 General Requirements (Second Revision)

Rs 1500/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 Table-1 Fig.1 (Dimension of Socket length)	-
6.1 (Opacity test in accordance with IS 12235 (Part 3))	-
6.3 (Effect on water test)	-

-
Short term hydraulic test. Chemical: All except Effect on Water which is for Pipes above 60 mm Nominal dia and except for the requirement of 'Other Toxic Substances such a di-n-octyl Tin -s-s bis iso-octyl mercapto acetate' and 'butyl stearate

14093

BIS, Eastern Regional Laboratory (ERL)

None

IS 11513 (2017)

Hot rolled carbon steel strip for cold rolling purposes - Specification (Second Revision)

For all grades except test mentioned in remarks

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 8 (Workmanship)	-
Cl 9 (Length, Width, Thickness, Crown, Edge Camber & Difference in Thickness Across Width )	-
Cl 9 (Length, Width, Thickness, Crown, Edge Camber & Difference in Thickness Across Width )	-
Cl 9 (Length, Width, Thickness, Crown, Edge Camber & Difference in Thickness Across Width )	-
Cl 9 (Length, Width, Thickness, Crown, Edge Camber & Difference in Thickness Across Width )	-
Cl 9 (Length, Width, Thickness, Crown, Edge Camber & Difference in Thickness Across Width )	-
6.1 (Carbon %)	-
6.1 (Manganese %)	-
6.1 (Phosphorus %)	-
6.1 (Sulphur %)	-
6.1 (Silicon %)	-
6.1 ( Copper %)	-
6.1 ( Nitrogen%)	-
Cl. 9.5 (Edge Camber)	-
6.1 ( Aluminium %)	-
6.1 (Boron)	-
6.1 ( Ti)	-
6.1 ( Nb)	-
6.1 (V)	-
Cl. 6.1 &6.2 Table 1, (Chromium)	-
Cl. 6.1 &6.2 Table 1, (Nb+Ti+B+V)	-
Cl. 6.1 &6.2 Table 1, (Nickel)	-
Cl. 6.1 &6.2 Table 1, (Molybdenum)	-

-
Remarks: Type of killing, elements of killing to be declared

14094

BIS, Southern Regional Laboratory (SRL)

None

IS 6392 (2020)

Steel Pipes Flanges — Specification ( First Revision )

Rs 3070/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1 (Dimension)	-
7.3 (Joint Faces)	-
3.1 (Tensile Strength-IS 1608(P-1))	-
3.1 (Yield Stress-IS 1608(P-1))	-
3.1 (Elongation- IS 1608(P-1))	-
6.1 (Dimension)	-
13.1.1 (Mass of Zinc Coating- IS 4736)	-
13.1.2 (Uniformity of Zinc Coating-IS2633)	-
13.1.2 (Adhesion Test- IS 2629)	-

-
" 2 no. Excluding except Hydrostatic test facility upto 300mm, Facility for preparation of test specimen not available

14095

BIS, Eastern Regional Laboratory (ERL)

None

IS 5382 (2018)

Rubber seals - Joint rings for water supply, drainage and sewerage pipelines - Specification for materials (Second Revision)

For all hardness clauses

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.2.1 (Dimensional tolerances)	-
4.2.2 (i)In zones involved in sealing function)	-
4.2.3 (Hardness, IRHD from buttons )	-
4.2.4 (Tensile strength, MPa)	-
4.2.5 (Compression set in air)	-
4.2.5.2 (Compression set at 23 ºC for 72 h)	-
4.2.5.2 (Compression set at 70 ºC for 24 h)	-
4.2.5.3 (Low temp compression set at -10 ºC for 72 h)	-
4.2.6 (Hardness, IRHD from buttons Tensile strength, % Elongation at break , % )	-
4.2.8 (Volume change in water , max/min 7 days at 70 ºC )	-
4.2.10 (Spliced joint)	-

-
Facility not available for Cl 4.2.7 Stress relaxation in compression (NB: 100 days Stress relaxation test will be carried out on specific request from BO when facility is created), 4.2.9 Ozone resistance 2 rings + 2 slabs of each type of rubber + 9 small buttons of each type of rubber + 3 nos of big buttons of each type of rubber. Refer clause 5.1 for samples to be sent.

14096

BIS, Central Laboratory (CL)

None

IS 17404 (2020)

Electrogalvanized Hot Rolled and Cold Reduced Carbon Steel Sheets and Strips ” Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2)) (C -IS 228)	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2)) (S - IS 228)	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2)) (P - IS 228 )	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2)) (Mn - IS 228)	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2)) (Al - IS 228)	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2)) (Si - IS 228)	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2)) (Cu - IS 228)	-
8.3.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2)) (Yield strength - IS 1608(Pt-1))	-
8.3.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2)) (Tensile Strength - IS 1608(Pt-1))	-
8.3.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2)) (Elongation - IS 1608(Pt-1))	-
10.1 (Coil Internal Diameter-IS17404)	-
10.2 (As per IS 1079, IS 5986, IS 513(pt-1 & 2)) (Width)	-
10.2 (As per IS 1079, IS 5986, IS 513(pt-1 & 2)) (Length)	-
10.2 (As per IS 1079, IS 5986, IS 513(pt-1 & 2)) (Thickness)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm; Excluding Except Coating;

14097

BIS, Central Laboratory (CL)

None

IS 16018 (2012)

Wheeled fire extinguishers - Performance and construction - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 4 (Types of Wheeled Fire Extinguishers)	-
Cl 5.3 (Fill Density)	-
Cl 5.4 (Filling Tolerance)	-
Cl 5.5.1 (Nominal Charge)	-
Cl no 5.5.2 (16018 :2012)	-
Cl 6.2.1 (Effective Discharge Time)	-
Cl 6.2.2 (Bulk Range)	-
Cl 6.3 (Resistance To Temperature Changes)	-
Cl 6.5 (Intermittent Discharge Test)	-
6.6.2 (Internal Corrosion Test)	-
Cl no 6.7 (16018 :2012)	-
Cl no 8.6 (16018 :2012)	-
Cl no 7.1 (16018 :2012)	-
8.2 (High Pressure Cylinder)	-
Cl no 8.3.1 (16018 :2012)	-
8.3.2 (Deformation Test)	-
Cl no 8.3.3 (16018 :2012)	-
Cl no 8.4.1 (Welded low carbon steel)	-
Cl-8.4.2 (Stainless steel cylinder)	-
Cl-8.5 (Aluminium cylinder)	-
8.7.1 (Caps valves and closure)	-
Cl no 8.8.1 (16018 :2012)	-
Cl no 8.8.2 (16018 :2012)	-
Cl no 8.9.2 (16018 :2012)	-
8.10.1.4 (Requirements of plastic components (Impact test))	-
8.11.1 (Requirement of the Discharge Assemblies)	-
Cl no 8.12 (16018 :2012)	-
8.13.1 (Horn of carbon dioxide extinguisher)	-
8.13.2 (Requirement to prevent loosening or detachment)	-
8.13.3 (Load test on discharge horn)	-
Cl no 8.14 (16018 :2012)	-
Cl no 8.15 (16018 :2012)	-
Cl- 8.16.1.1 to 8.16.1.7 (Pressure gauges for low pressure extinguishers-General)	-
Cl- 8.16.2 , 8.16.2.1 & 8.16.2.2 (Pressure gauge calibration test)	-
Cl- 8.16.3.1 & 8.16.3.2 (Pressure gauge for Burst strength test)	-
Cl 6.1 (Operating Temperature)	-
6.6.1 (External Corrosion Test)	-

-
Excluding -; Resistance to corrosion, Durability test, Electrical conductivity of extinguisher discharge, Leakage test, Performance fire tests, Pressure cycling test.

14098

BIS, Central Laboratory (CL)

None

IS 15962 (2012)

Structural steels for buildings and structures with improved seismic resistance

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clauses 7, 8.1 & .2, Table- 1 (E250S, C)	-
Clauses 7, 8.1 & .2, Table- 1 (E300S, S)	-
Clauses 7, 8.1 & .2, Table- 1 (E250S, P)	-
Clauses 7, 8.1 & .2, Table- 1 (E250S, Mn )	-
Clauses 7, 8.1 & .2, Table- 1 (E250S, Si)	-
Clauses 7, 8.1 & .2, Table- 1 (E250S, CE)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm;

14099

BIS, Eastern Regional Laboratory (ERL)

None

IS 5986 (2017)

Hot rolled steel sheet, plate and strip for forming and flanging purposes - Specification (Fourth Revision)

For all grades except for the tests mentioned in remarks

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 8 (UTM)	-
Cl 8 (UTM)	-
Cl 8 (UTM)	-
Cl 9 (Press)	-
Cl 10 (Sudden Load Applied)	-
Cl 13 (Workmanship)	-
Cl 15 (Length, Width & Thickness)	-
Cl 15 (Length, Width & Thickness)	-
7.1 (Carbon %)	-
7.1 (Manganese %)	-
7.1 (Phosphorus %)	-
7.1 (Sulphur %)	-
7.1 (Cr)	-
7.1 (Silicon %)	-
7.1 (Ni)	-
7.1 (Mo)	-
Cl. 7 (Niobium)	-
7.1 ( Ti)	-
Cl. 7 (Vanadium)	-
Cl. 7 (Boron)	-
7.1 ( Copper %)	-
Cl. 7 (Ti+Nb+V+B)	-
7.1 (CE)	-
7.1 ( Aluminium %)	-
Cl. 7 (Micro Alloy)	-
Cl. 7 (Cr+Ni+Mo)	-

-
facility not available for Hole Expansion ratio, mech: prepared test pc for impact is required,

14100

BIS, Eastern Regional Laboratory (ERL)

None

IS 1239 : Part 1 (2004)

Steel tubes, tubulars and other wrought steel fittings - Specification: Part 1 steel tubes (Sixth Revision)

For all designation except tests mentioned in remarks

Rs. 9200/- Excluding test on joints View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 8 (Outer Diameter, Thickness & Mass)	-
Cl 14 (Tensile Test, Flattening Test & Bend Test)	-
Cl 14 (Tensile Test, Flattening Test & Bend Test)	-
Cl 14 (Tensile Test, Flattening Test & Bend Test)	-
Cl 15 (Workmanship)	-
Cl 14 (Tensile Test, Flattening Test & Bend Test)	-
7, 6.1.1 (CARBON)	-
7, 6.1.1 (SULPHUR)	-
7, 6.1.1 (PHOSPHURS)	-
7, 6.1.1 (MANGANESE)	-
7, 6.1.1 (SILICON)	-

-
Mech: Except Hydrostatic test and thread Chem: except Al,B,Nb,V,Ti,Ca 1m x1 No ( plus another 1.8 m pc for bend test up to 50 mm NB) + 50 g drilling + 4 pcsx10 cm

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number