| 14101 |
BIS, Central Laboratory (CL)
| None
| IS 15660 (2017) |
Refillable transportable seamless aluminium alloy gas cylinders - Specification (First Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.1.1,5.2.1,5.2.2, Table-1 (Silicon) |
- |
|
|
|
| 5.1.1,5.2.1,5.2.2, Table-1 ( Iron) |
- |
|
|
|
| 5.1.1,5.2.1,5.2.2, Table-1 (Copper) |
- |
|
|
|
| 5.1.1,5.2.1,5.2.2, Table-1 ( Manganese) |
- |
|
|
|
| 5.1.1,5.2.1,5.2.2, Table-1 ( Manesium) |
- |
|
|
|
| 5.1.1,5.2.1,5.2.2, Table-1 (Chromium) |
- |
|
|
|
| 5.1.1,5.2.1,5.2.2, Table-1 ( Nickel) |
- |
|
|
|
| 5.1.1,5.2.1,5.2.2, Table-1 ( Zinc) |
- |
|
|
|
| 5.1.1,5.2.1,5.2.2, Table-1 ( Titanium) |
- |
|
|
|
| 5.1.1,5.2.1,5.2.2, Table-1 ( Zirconium) |
- |
|
|
|
| 5.1.1,5.2.1,5.2.2, Table-1 ( Lead) |
- |
|
|
|
|
- |
-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm;
Excluding Except magnesium, maganese, Zinc; |
| 14102 |
BIS, Southern Regional Laboratory (SRL)
| None
| IS 1536 (2001) |
Centrifugally cast (Spun) iron pressure pipes for water, gas and sewage - Specification (Fourth Revision) |
- |
Rs.4500.00 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 11.2, annex-A (Tensile Test ( for pipes over 300mm)) |
- |
|
|
|
| 11.3 (Brinell Hardness Test) |
- |
|
|
|
| 13.4
Table 5 (c) |
- |
|
|
|
| 13.4
Table 5 (D) |
- |
|
|
|
| 13.4
Table 5 (E) |
- |
|
|
|
| 13.4
Table 5 (b) |
- |
|
|
|
| 13.4
Table 5 (a) |
- |
|
|
|
| 13.4
Table 5 (r) |
- |
|
|
|
| 13.4
Table 5 (f) |
- |
|
|
|
| 13.4
Table 5 (s) |
- |
|
|
|
| 13.4
Table 5 (Holes Number) |
- |
|
|
|
| 13.4
Table 5 (Holes Diameter) |
- |
|
|
|
| 13.4
Table 5 (Diameter of Bolts) |
- |
|
|
|
| 13.5
Table 6 to 8 (DE Lead joint) |
- |
|
|
|
| 13.5
Table 6 to 8 (DE Push on joint) |
- |
|
|
|
| 13.5
Table 6 to 8 (e) |
- |
|
|
|
| 13.6
Table 9 (DE) |
- |
|
|
|
| 13.6
Table 9 (e) |
- |
|
|
|
|
- |
-
" 1 no+ 2test bar
Excluding "Excl. Ring test, Hydrostatic test, chemical tests, and Permissible deviation from a stright line Prepared Test piece needed for Tensile test" |
| 14103 |
BIS, Central Laboratory (CL)
| None
| IS 9537 : Part 3 (1983) |
Specification for conduits for electrical installations: Part 3 rigid plain conduits of insulating meterials |
- |
1275 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6.1 (Marking) |
- |
|
|
|
| 6.3 (Standard Mark on Conduit) |
- |
|
|
|
| 6.2 (Durability of Marking as per 6.4 of IS: 9537 (Part 1)-1980) |
- |
|
|
|
| 7.1.1 (Maximum and minimum outside diameter of socket) |
- |
|
|
|
| 7.1.2 (Maximum and minimum outside diameter of conduit) |
- |
|
|
|
| 7.2 (Minimum inside diameter of conduit) |
- |
|
|
|
| 7.3 (Length of conduit) |
- |
|
|
|
| 7.4 (Unifomity of The wall Thickness) |
- |
|
|
|
| 8.1 (Construction as per clause 8 of IS: 9537 (Part 1)-1980) |
- |
|
|
|
| 9.2 (Bending Test i) At Room Temp ii) At Low Temp (-5 ±2°C)) |
- |
|
|
|
| 9.3 (Compression Test as per caluse 9.3 of IS: 9537 (Part 1)-1980) |
- |
|
|
|
| 9.4 (Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980) |
- |
|
|
|
| 9.5 (Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980) |
- |
|
|
|
| 10 (Resistance to Heat -Ball presure test) |
- |
|
|
|
| 11 (Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980) |
- |
|
|
|
| 12 (Electrical Characteristics-Test for electric strength as per clause 12.1.1 of IS: 9537 (Part 1)-1980) |
- |
|
|
|
| 12 (Electrical Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980) |
- |
|
|
|
| 7.1.1 (Maximum and minimum outside diameter of socket) |
- |
|
|
|
|
- |
-
- |
| 14104 |
BIS, Central Laboratory (CL)
| None
| IS 15542 (2005) |
Power - Operated chaff cutter - Safety requirements |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl.4.1, Table-1 (Carbon) |
- |
|
|
|
| Cl.4.1, Table-1 (Sulphur) |
- |
|
|
|
| Cl.4.1, Table-1 (Phosphorus) |
- |
|
|
|
| Cl.4.1, Table-1 (Manganese) |
- |
|
|
|
| Cl.4.1, Table-1 (Nitrogen) |
- |
|
|
|
|
- |
-
- |
| 14105 |
BIS, Central Laboratory (CL)
| None
| IS 15490 (2017) |
Seamless steel cylinders for on - Board storage of compressed natural gas as a fuel for automotive vehicles - Specification (First Revision) |
- |
16297 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.2.1,5.2.2,5.3 (Carbon) |
- |
|
|
|
| 5.2.1,5.2.2,5.3 (Sulphur) |
- |
|
|
|
| 5.2.1,5.2.2,5.3 (Phosphorus) |
- |
|
|
|
| 5.2.1,5.2.2,5.3 (Manganese) |
- |
|
|
|
| 5.2.1,5.2.2,5.3 (Silicon) |
- |
|
|
|
| 5.2.1,5.2.2,5.3 (Chromium) |
- |
|
|
|
| 5.2.1,5.2.2,5.3 (Nickle ) |
- |
|
|
|
| 5.2.1,5.2.2,5.3 (molybdenum) |
- |
|
|
|
| 5.2.1,5.2.2,5.3 (Sulphur and phosphorus) |
- |
|
|
|
| 7.3, Annex-A (Surface defects) |
- |
|
|
|
|
- |
-
Excluding "-; Cylinder neck threads
Cl 7.5
Out-of-roundness
(Cl 7.6)
Mean diameter
Cl 7.7, Bonfire test (Cl 9.2.7),Sulphide Stress Cracking Resistance Test
(Cl 9.3.4) ,
Pressure Cycling Test
(Cl 10.2 & 9.2.3) ,
Hydraulic Burst Test
(Cl 10.2, 9.2.3 & 9.2.4) , Hydrostatic Stretch Test
(Cl 11.2) ,
Leakage test (Cl 11.4)" |
| 14106 |
BIS, Central Laboratory (CL)
| None
| IS 14756 (2017) |
Stainless steel cookware - Specification (First Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.1 & Table 1 of IS 5522 (Carbon) |
- |
|
|
|
| 3.1 & Table 1 of IS 5522 (Silicon) |
- |
|
|
|
| 3.1 & Table 1 of IS 5522 (Manganese) |
- |
|
|
|
| 3.1 & Table 1 of IS 5522 (Nickel) |
- |
|
|
|
| 3.1 & Table 1 of IS 5522 (Chromium) |
- |
|
|
|
| 3.1 & Table 1 of IS 5522 (Sulphur) |
- |
|
|
|
| 3.1 & Table 1 of IS 5522 (Phosphorus) |
- |
|
|
|
| 3.1 & Table 1 of IS 5522 (Copper) |
- |
|
|
|
| 3.1 & Table 1 of IS 5522 (Nitrogen) |
- |
|
|
|
| 3.1 & Table 1 of IS 5522 (Carbon) |
- |
|
|
|
| 3.1 & Table 1 of IS 5522 (Carbon) |
- |
|
|
|
| 3.1 & Table 1 of IS 5522 (Silicon) |
- |
|
|
|
| 3.1 & Table 1 of IS 5522 (Manganese) |
- |
|
|
|
| 3.1 & Table 1 of IS 5522 (Nickel) |
- |
|
|
|
| 3.1 & Table 1 of IS 5522 (Chromium) |
- |
|
|
|
| 3.1 & Table 1 of IS 5522 (Sulphur) |
- |
|
|
|
| 3.1 & Table 1 of IS 5522 (Phosphorus) |
- |
|
|
|
| 3.1 & Table 1 of IS 5522 (Copper) |
- |
|
|
|
| 3.1 & Table 1 of IS 5522 (Nitrogen) |
- |
|
|
|
| 3.1 & Table 1 of IS 5522 (Carbon) |
- |
|
|
|
| 3.1 & Table 1 of IS 5522 (Carbon) |
- |
|
|
|
| 3.1 & Table 1 of IS 5522 (Silicon) |
- |
|
|
|
| 3.1 & Table 1 of IS 5522 (Manganese) |
- |
|
|
|
| 3.1 & Table 1 of IS 5522 (Nickel) |
- |
|
|
|
| 3.1 & Table 1 of IS 5522 (Chromium) |
- |
|
|
|
| 3.1 & Table 1 of IS 5522 (Sulphur) |
- |
|
|
|
| 3.1 & Table 1 of IS 5522 (Phosphorus) |
- |
|
|
|
| 3.1 & Table 1 of IS 5522 (Copper) |
- |
|
|
|
| 3.1 & Table 1 of IS 5522 (Nitrogen) |
- |
|
|
|
| 3.1 & Table 1 of IS 5522 (Carbon) |
- |
|
|
|
|
- |
-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm; |
| 14107 |
BIS, Central Laboratory (CL)
| None
| IS 14652 (1999) |
18 percent nickel maraging steel bars and rods - Specification |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1 Table 1 (Carbon-Method mutually agreed between supplier & purchaser) |
- |
|
|
|
| 4.1 Table 1 (Sulphur-Method mutually agreed between supplier & purchaser) |
- |
|
|
|
| 4.1 Table 1 (Phosphorous-Method mutually agreed between supplier & purchaser) |
- |
|
|
|
| 4.1 Table 1 (Manganese-Method mutually agreed between supplier & purchaser) |
- |
|
|
|
| 4.1 Table 1 (Silicon-Method mutually agreed between supplier & purchaser) |
- |
|
|
|
| 4.1 Table 1 (Chromium-Method mutually agreed between supplier & purchaser) |
- |
|
|
|
| 4.1 Table 1 (Copper-Method mutually agreed between supplier & purchaser) |
- |
|
|
|
| 4.1 Table 1 (Nickel-Method mutually agreed between supplier & purchaser) |
- |
|
|
|
| 4.1 Table 1 (Cobalt-Method mutually agreed between supplier & purchaser) |
- |
|
|
|
| 4.1 Table 1 (Molybdenum-Method mutually agreed between supplier & purchaser) |
- |
|
|
|
| 4.1 Table 1 (Titanium-Method mutually agreed between supplier & purchaser) |
- |
|
|
|
| 4.1 Table 1 (Aluminium-Method mutually agreed between supplier & purchaser) |
- |
|
|
|
| 4.1 Table 1 (Iron-Method mutually agreed between supplier & purchaser) |
- |
|
|
|
|
- |
-
- |
| 14108 |
BIS, Central Laboratory (CL)
| None
| IS 14650 (1999) |
Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling purposes - Specificaation |
- |
Rs. 450/- (only for dimensions and marking). View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6 (Carbon- Relevant parts of IS 228 or any other established instrumental /Chemical method) |
- |
|
|
|
| 6 (Manganese- Relevant parts of IS 228 or any other established instrumental /Chemical method) |
- |
|
|
|
| 6 (Silicon- Relevant parts of IS 228 or any other established instrumental /Chemical method) |
- |
|
|
|
| 6 (Nitrogen- Relevant parts of IS 228 or any other established instrumental /Chemical method) |
- |
|
|
|
| 6 (Aluminium- Relevant parts of IS 228 or any other established instrumental /Chemical method) |
- |
|
|
|
|
- |
-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm; |
| 14109 |
BIS, Southern Regional Laboratory (SRL)
| None
| IS 1538 (1993) |
Cast iron fittings for pressure pipes for water, gas and sewage - Specification (Third Revision) |
- |
Rs 2700/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.1 (tensile strength) |
- |
|
|
|
| 6.1 (Brinell hardness tests) |
- |
|
|
|
| 9.1,Table 4 (D) |
- |
|
|
|
| 9.1,Table 4 (a) |
- |
|
|
|
| 9.1,Table 4 (b) |
- |
|
|
|
| 9.1,Table 4 (s) |
- |
|
|
|
| 9.1,Table 4 (r) |
- |
|
|
|
| 9.1,Table 5 (D) |
- |
|
|
|
| 9.1,Table 5 (b) |
- |
|
|
|
| 9.1,Table 5 (c) |
- |
|
|
|
| 9.1,Table 5 (f) |
- |
|
|
|
| 9.1,Table 5 (s) |
- |
|
|
|
| 9.1,Table 5 (C) |
- |
|
|
|
| 9.1,Table 5 (Holes No) |
- |
|
|
|
| 9.1,Table 5 (Holes diameter) |
- |
|
|
|
| 9.1,Table 5 (Diameterof Bolts) |
- |
|
|
|
| 9.1,Table 6 (D) |
- |
|
|
|
| 9.1,Table 6 (C) |
- |
|
|
|
| 9.1,Table 6 (Holes No) |
- |
|
|
|
| 9.1,Table 6 (Holes diameter) |
- |
|
|
|
| 9.1,Table 6 (Diameterof Bolts) |
- |
|
|
|
| 9.1&11.1,Table 7,8&9 (e) |
- |
|
|
|
| 9.1&11.1,Table 7,8&9 (l) |
- |
|
|
|
| 9.1&11.1,Table 7,8&9 (Mass (Approx)) |
- |
|
|
|
| 9.1&11.1,Table 10 to13 (e) |
- |
|
|
|
| 9.1&11.1,Table 10 to13 (Mass (Approx)) |
- |
|
|
|
| 9.1&11.1,Table 14 (e) |
- |
|
|
|
| 9.1&11.1,Table 14 (l) |
- |
|
|
|
| 9.1&11.1,Table 14 (h) |
- |
|
|
|
| 9.1&11.1,Table 14 (Mass (Approx)) |
- |
|
|
|
| 9.1&11.1,Table 15 (e) |
- |
|
|
|
| 9.1&11.1,Table 15 (l) |
- |
|
|
|
| 9.1&11.1,Table 15 (Mass (Approx)) |
- |
|
|
|
| 9.1&11.1,Table 16 (e) |
- |
|
|
|
| 9.1&11.1,Table 16 (l) |
- |
|
|
|
| 9.1&11.1,Table 16 (h) |
- |
|
|
|
| 9.1&11.1,Table 16 (Mass (Approx)) |
- |
|
|
|
| 9.1&11.1,Table 17 (e1) |
- |
|
|
|
| 9.1&11.1,Table 17 (l1) |
- |
|
|
|
| 9.1&11.1,Table 17 (e2) |
- |
|
|
|
| 9.1&11.1,Table 17 (l2) |
- |
|
|
|
| 9.1&11.1,Table 17 (l3) |
- |
|
|
|
| 9.1&11.1,Table 17 (l) |
- |
|
|
|
| 9.1&11.1,Table 17 (Mass) |
- |
|
|
|
| 9.1&11.1,Table 18 (a) |
- |
|
|
|
| 9.1&11.1,Table 18 (P) |
- |
|
|
|
| 9.1&11.1,Table 18 (Mass (Approx)) |
- |
|
|
|
| 9.1&11.1,Table 19 (DC) |
- |
|
|
|
| 9.1&11.1,Table 19 (e) |
- |
|
|
|
| 9.1&11.1,Table 19 (a) |
- |
|
|
|
| 9.1&11.1,Table 19 (l) |
- |
|
|
|
| 9.1&11.1,Table 19 (Mass (Approx)) |
- |
|
|
|
| 9.1&11.1,Table 20 (DI) |
- |
|
|
|
| 9.1&11.1,Table 20 (h) |
- |
|
|
|
| 9.1&11.1,Table 20 (Mass (Approx)) |
- |
|
|
|
| 9.1&11.1,Table 21 (e) |
- |
|
|
|
| 9.1&11.1,Table 21 (Mass (Approx)) |
- |
|
|
|
| 9.1&11.1,Table 21 (e) |
- |
|
|
|
| 9.1&11.1,Table 22 (a) |
- |
|
|
|
| 9.1&11.1,Table 22 (b) |
- |
|
|
|
| 9.1&11.1,Table 22 (c) |
- |
|
|
|
| 9.1&11.1,Table 22 (g) |
- |
|
|
|
| 9.1&11.1,Table 23 (e) |
- |
|
|
|
| 9.1&11.1,Table 23 (Mass (Approx)) |
- |
|
|
|
| 9.1&11.1,Table 24 (e) |
- |
|
|
|
| 9.1&11.1,Table 24 (l) |
- |
|
|
|
| 9.1&11.1,Table 24 (e1) |
- |
|
|
|
| 9.1&11.1,Table 24 (h) |
- |
|
|
|
| 9.1&11.1,Table 24 (Mass (Approx)) |
- |
|
|
|
| 9.1&11.1,Table 25 (e) |
- |
|
|
|
| 9.1&11.1,Table 25 (l) |
- |
|
|
|
| 9.1&11.1,Table 25 (h) |
- |
|
|
|
| 9.1&11.1,Table 25 (Mass (Approx)) |
- |
|
|
|
| 9.1&11.1,Table 26 (e1) |
- |
|
|
|
| 9.1&11.1,Table 26 (e2) |
- |
|
|
|
| 9.1&11.1,Table 26 (l) |
- |
|
|
|
| 9.1&11.1,Table 26 (Mass (Approx)) |
- |
|
|
|
| 9.1&11.1,Table 27 (e1) |
- |
|
|
|
| 9.1&11.1,Table 27 (e2) |
- |
|
|
|
| 9.1&11.1,Table 27 (l3) |
- |
|
|
|
| 9.1&11.1,Table 27 (Mass) |
- |
|
|
|
| 9.1&11.1,Table 28 (D) |
- |
|
|
|
| 9.1&11.1,Table 28 (t) |
- |
|
|
|
| 9.1&11.1,Table 28 (Mass (Approx)) |
- |
|
|
|
| 12.1 to 12.7 (Coating ) |
- |
|
|
|
|
- |
-
" 4 pcsx10cm + 2 nos "
Excluding Excl. Tensile Test (Test Methord IS 2078:1979 Withdrawn) & hydraulic test,chemical tests |
| 14110 |
BIS, Southern Regional Laboratory (SRL)
| None
| IS 1703 (2000) |
Water Fittings - Copper Alloy Float Valves (Horizontal Plunger Type) - |
- |
Rs. 4800/-and testing charges as per referred ISs View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3 (CLASSIFICATION) |
- |
|
|
|
| 4 (NOMINAL SIZES) |
- |
|
|
|
| 6 (MANUFACTURE AND WORKMANSHIP) |
- |
|
|
|
| 6.2 (Machining) |
- |
|
|
|
| 7.2 and Fig.1 (CONSTRUCTION) |
- |
|
|
|
| 7.3 and Fig.1 (CONSTRUCTION) |
- |
|
|
|
| 7.4 (Dimensions of Body) |
- |
|
|
|
| 7.6 (Piston) |
- |
|
|
|
| 7.7.1 and Table 5(a) & 5(b) (Dimensions of Levers - A) |
- |
|
|
|
| 7.7.2 (Levers) |
- |
|
|
|
| 7.7.3 (Levers) |
- |
|
|
|
| 7.7.4 (Short arm of the lever) |
- |
|
|
|
| 7.7.6 (Levers) |
- |
|
|
|
| 7.7.7 (Piston Travel) |
- |
|
|
|
| 7.9.1 (Silencing Pipes and Anti-Siphonage Provision) |
- |
|
|
|
| 7.9.2 (Silencing Pipes and Anti-Siphonage Provision) |
- |
|
|
|
| 7.1 (Floats - Dia of float
IS 9762) |
- |
|
|
|
| 7.1 (Floats - Wall thickness
IS 9762) |
- |
|
|
|
|
- |
-
" 1 No.
Excluding Except hydraulic test, shutting off test and test for mechanical strength of lever, Thread Check,chemical tests |
| 14111 |
BIS, Central Laboratory (CL)
| None
| IS 14491 (1997) |
Low carbon high strength cold rolled steel sheets and coils for cold forming - Specification |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7.1 & 7.2 (Carbon- Relevant parts of IS 228 or any other established instrumental /Chemical method) |
- |
|
|
|
| 7.1 & 7.2 (Sulphur- Relevant parts of IS 228 or any other established instrumental /Chemical method) |
- |
|
|
|
| 7.1 & 7.2 (Phosphorus- Relevant parts of IS 228 or any other established instrumental /Chemical method) |
- |
|
|
|
| 7.1 & 7.2 (Manganese- Relevant parts of IS 228 or any other established instrumental /Chemical method) |
- |
|
|
|
| 7.1 & 7.2 (Silicon- Relevant parts of IS 228 or any other established instrumental /Chemical method) |
- |
|
|
|
| 7.1 & 7.2 (Nitrogen- Relevant parts of IS 228 or any other established instrumental /Chemical method) |
- |
|
|
|
| 7.1 & 7.2 (Aluminium- Relevant parts of IS 228 or any other established instrumental /Chemical method) |
- |
|
|
|
| 7.1 & 7.2 (Titanium- Relevant parts of IS 228 or any other established instrumental /Chemical method) |
- |
|
|
|
| 7.1 & 7.2 (Vanadium- Relevant parts of IS 228 or any other established instrumental /Chemical method) |
- |
|
|
|
| 7.1 & 7.2 (Niobium- Relevant parts of IS 228 or any other established instrumental /Chemical method) |
- |
|
|
|
|
- |
-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm; |
| 14112 |
BIS, Central Laboratory (CL)
| None
| IS 14331 (1995) |
Steels for high temperature bolting applications - Specification |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 1, 4.1,4.2 & 4.3 (Carbon- Relevant parts of IS 228 or any other established instrumental /Chemical method) |
- |
|
|
|
| 1, 4.1,4.2 & 4.3 (Sulphur- Relevant parts of IS 228 or any other established instrumental /Chemical method) |
- |
|
|
|
| 1, 4.1,4.2 & 4.3 (Phosphorus- Relevant parts of IS 228 or any other established instrumental /Chemical method) |
- |
|
|
|
| 1, 4.1,4.2 & 4.3 (Manganese- Relevant parts of IS 228 or any other established instrumental /Chemical method) |
- |
|
|
|
| 1, 4.1,4.2 & 4.3 (Nitrogen- Relevant parts of IS 228 or any other established instrumental /Chemical method) |
- |
|
|
|
|
- |
-
- |
| 14113 |
BIS, Eastern Regional Laboratory (ERL)
| None
| IS 11169 : Part 1 (1984) |
Specification for steels for cold heading/cold extrusion applications: Part 1 wrought carbon and low alloy steels |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 6 (Diameter & Out Of Roundness) |
- |
|
|
|
| TABLE-1,2,3 (Clause 4,4.1,4.2,4.3) ( CARBON) |
- |
|
|
|
| TABLE-1,2,3 (Clause 4,4.1,4.2,4.3) (SULPHUR) |
- |
|
|
|
| TABLE-1,2,3 (Clause 4,4.1,4.2,4.3) (PHOSPHURS) |
- |
|
|
|
| TABLE-1,2,3 (Clause 4,4.1,4.2,4.3) (MANGANESE) |
- |
|
|
|
| TABLE-1,2,3 (Clause 4,4.1,4.2,4.3) (SILICON) |
- |
|
|
|
| TABLE-1,2,3 (Clause 4,4.1,4.2,4.3) (Nickel) |
- |
|
|
|
| TABLE-1,2,3 (Clause 4,4.1,4.2,4.3) (Chromium) |
- |
|
|
|
|
- |
-
1.5 m (Prepared sample should be provided for hardenability test)
Excluding Cl 12.1 Microscopic Inclusions, Cl 15 Decarburization, 14.1.1 Macroetch test, 14.1.3.1Eddy current/magnetic particle test ,Cl.7.1, C(<0.05%)V, Sn, B, Al |
| 14114 |
BIS, Central Laboratory (CL)
| None
| IS 9968 : Part 1 (1988) |
Specification for elastomer insulatedcables: Part 1 for working voltages up to and including 1100 volts (First Revision) |
- |
Rs.12000/ View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.1 ( Copper Cooduetor) |
- |
|
|
|
| 3.2 (Aluminium conductor) |
- |
|
|
|
| 4.1 (INSULATION : lnsulation for General Service) |
- |
|
|
|
| 4.2 (INSULATION : Heat Resisting insulation) |
- |
|
|
|
| 4.3 (INSULATION : Silicone Rubber Insulation) |
- |
|
|
|
| 5.1 (TAPE : Proofed Tape) |
- |
|
|
|
| 5.2 (TAPE : 2 Polyethyl_ Terephthalate ( PETP ) Tape or
Plastic: Tape or Any Other SlIIitable Tape ) |
- |
|
|
|
| 5.3 (TAPE : Giass Tape) |
- |
|
|
|
| 6.1 (FILLERS : ) |
- |
|
|
|
| 7.1 (BRAID : Textile Braid) |
- |
|
|
|
| 8.1 (SHEATH : General Service Insulated Cables and Flexible
Cords) |
- |
|
|
|
| 8.2 (SHEATH :Heat Resisting Insulated Cables) |
- |
|
|
|
| 10 ( Conductor ) |
- |
|
|
|
| 12.2 (Insulation : Thickness of Insufatien) |
- |
|
|
|
| 11 (Separator tape) |
- |
|
|
|
| 12.2 (Insulation : Thickness of Insufatien) |
- |
|
|
|
| 12.4 (Insulation : Allplication of Insulation) |
- |
|
|
|
| 13 (CORE IDENTiFICATlON) |
- |
|
|
|
| 14 (Tape) |
- |
|
|
|
| 15 (BRAIDING) |
- |
|
|
|
| 16 (COMPOUNDING AND VARNISHING) |
- |
|
|
|
| 17 (LAYING UP OF CORES) |
- |
|
|
|
| 18 ( Binder tape) |
- |
|
|
|
| 19.2 (Sheath : Thickness of Sheath) |
- |
|
|
|
| 19.4 ( Sheath :Colour) |
- |
|
|
|
| 20 ( Overall diameter) |
- |
|
|
|
| 21. (a) (Persulphate tests (for copper)) |
- |
|
|
|
| 21. (b) (Annealing Test (for coper)) |
- |
|
|
|
| 21. (c) ( Tensile Test (for aluminium)) |
- |
|
|
|
| 21. (d) ( Wrapping Test (for aluminium)) |
- |
|
|
|
| 21. (e) (Conductor Resistance ) |
- |
|
|
|
| 21.1 ( Tensile strength ) |
- |
|
|
|
| 22.1 ( Elongation) |
- |
|
|
|
| 21.1 (type test : Ageing In air oven) |
- |
|
|
|
| 21.1 (type test : Ageing in air bomb) |
- |
|
|
|
| 21.1 (type test : Ageing In oxygen
bomb) |
- |
|
|
|
| 21.1 (type test : Hot set elongation) |
- |
|
|
|
| 21.1 ( Tensile strength ) |
- |
|
|
|
| 22.1 ( Elongation) |
- |
|
|
|
| 21.1 (type test : Ageing In air oven) |
- |
|
|
|
| 21.1 (type test : Ageing in air bomb) |
- |
|
|
|
| 21.1 (type test : Tear resistance ) |
- |
|
|
|
| 21.1 (type test : Hot set elongation) |
- |
|
|
|
| 22.2 (type test :Insulauon resistance High voltage (water immersron ) test) |
- |
|
|
|
| 22.2 (type test : Flammability test
( applicable to cables
finished With SE 3 and
SE 4 sheaths only)
) |
- |
|
|
|
| 23 (identification) |
- |
|
|
|
| Cl.9.1 (Compound and Varnish) |
- |
|
|
|
| Cl.9.2 (Compound and Varnish) |
- |
|
|
|
| Cl.21.1 & Table 2 of IS: 6380-1984 (Water Absorption Test) |
- |
|
|
|
| Cl.19.1 (Application of Sheath) |
- |
|
|
|
| Cl.21.1 & Table 3 of IS: 6380-1984 (Physical Test on outer sheath (Without Ageing)) |
- |
|
|
|
| Cl.21.1 & Table 3 of IS: 6380-1984 (Physical Test on outer sheath (Without Ageing)) |
- |
|
|
|
| Cl.21.1 & Table 3 of IS: 6380-1984 (Physical Test on outer sheath (Without Ageing)) |
- |
|
|
|
| Cl.21.1 & Table 3 of IS: 6380-1984 (Physical Test on outer sheath (After ageing in air oven)) |
- |
|
|
|
| Cl.21.1 & Table 3 of IS: 6380-1984 (Physical Test on outer sheath (After ageing in air oven)) |
- |
|
|
|
| Cl.21.1 & Table 3 of IS: 6380-1984 (Physical Test on outer sheath (After ageing in air Bomb )) |
- |
|
|
|
| Cl.21.1 & Table 3 of IS: 6380-1984 (Physical Test on outer sheath (After ageing in air Bomb )) |
- |
|
|
|
| Cl.21.1 & Table 3 of IS: 6380-1984 (Physical Test on outer sheath (Oil Resistance Test )) |
- |
|
|
|
| Cl.21.1 & Table 3 of IS: 6380-1984 (Physical Test on outer sheath (Oil Resistance Test )
Variation on Elongation (Percentage)) |
- |
|
|
|
| Cl.21.1 & Table 3 of IS: 6380-1984 (Physical Test on outer sheath (Hot Set Test)) |
- |
|
|
|
| Cl.21.1 & Table 3 of IS: 6380-1984 (Physical Test on outer sheath (Hot Set Test)) |
- |
|
|
|
| Cl.21.1 & Table 2 of IS: 6380-1984 (Insulation Resistance Test) |
- |
|
|
|
| Cl.21.1 & Table 2 of IS: 6380-1984 (Insulation Resistance Test) |
- |
|
|
|
|
- |
-
Complete for finished Cable Except Water Absorption Test applicable for IE2 (Cl 21.1) |
| 14115 |
BIS, Central Laboratory (CL)
| None
| IS 13114 (1991) |
forged brass gate, globe and check valves for water works purposes |
- |
Please see remarks View breakup
Rs. 3150/- + testing charges as per referred ISS (excluding Cl. 7.1.2, Cl. 8.1.2) (only visual tests for Stem).
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Clause 8.1 and 9 ((Composition of Brass)Lead brass) |
- |
|
|
|
| Clause 8.1 and 9 ((Composition of Brass)lead Mn Brass) |
- |
|
|
|
| Clause 8.1 and 9 ((Composition of Brass)lead Mn Brass) |
- |
|
|
|
| 6.2 (Gate Valves) |
- |
|
|
|
| 6.3 (Globe valves) |
- |
|
|
|
| 6.4 (Check valves) |
- |
|
|
|
| 7, Table- 2 (Dimensions and Tolerances) |
- |
|
|
|
|
- |
-
Excluding Complete for material as per table 1; |
| 14116 |
BIS, Eastern Regional Laboratory (ERL)
| None
| IS 14885 (2001) |
Polyethylene pipes for the supply of gaseous fuels - Specification |
- |
Rs. 5500/- View breakup
Rs. 5500/- (excluding Hydraulic characteristics, Density, OIT, Resistance to weathering and squeeze-off)
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.4 (Colour) |
- |
|
|
|
| 6.1, Table-3 (Nominal Outside Diameter of Pipes , Cl 6.3.1) |
- |
|
|
|
| 6.1, Table-3 (Ovality Pipe, Cl 6.3.2) |
- |
|
|
|
| 6.2.1, Table-4 (Minimum Wall Thickness, Cl.6.3, Cl.6.2.1.1, Table-5) |
- |
|
|
|
| 8.2 (Reversion Test. Annex-C) |
- |
|
|
|
| 8.4 (Melt Flow Rate (MFR), IS 2530) |
- |
|
|
|
| 8.6 & Table-2 (Volatile Content: Annex-H of IS 14885) |
- |
|
|
|
| 8.7 (Tensile yield strength, Annex-J) |
- |
|
|
|
| 8.6 & Table-2 (Volatile Content: Annex-H of IS 14885) |
- |
|
|
|
| 7, Table-6 (Maximmn Out of Square of Each Pipe End) |
- |
|
|
|
| 8.7 (Elongation at break, Annex-J) |
- |
|
|
|
|
- |
-
Facility not available for water content and Thermal stability, water content and thermal stability. |
| 14117 |
BIS, Southern Regional Laboratory (SRL)
| None
| IS 1729 (2002) |
Cast iron/ductile iron drainage pipes and pipe fittings for over ground non-pressure pipeline socket and spigot series (Second Revision) |
- |
Rs. 2850/- and testing charges as per referred Iss View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.1 (Tensile Strrngth - IS1608(Pt-1)) |
- |
|
|
|
| 5.1 (Elongation - IS 1608(Pt-1)) |
- |
|
|
|
| 5.3 (Casting Defects) |
- |
|
|
|
| 5.4 (Hardness- IS 1500) |
- |
|
|
|
| 6 (Hammer Test - IS1729) |
- |
|
|
|
| 11 (Coating Test at 65degree Celcius ) |
- |
|
|
|
| 11 (Coating Test at 0degree Celcius) |
- |
|
|
|
|
- |
-
" 1 full length pipe +1 piece for coating test "
Excluding excl leakage test for fittings,Chemical tests |
| 14118 |
BIS, Southern Regional Laboratory (SRL)
| None
| IS 1342 (2019) |
Oil pressure stoves - Specification (Seventh Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4/4.1 (DESIGNATION, TYPES AND FUEL CAPACITY , ) |
- |
|
|
|
| 4/4.1 (DESIGNATION, TYPES AND FUEL CAPACITY , ) |
- |
|
|
|
| 4/4.1 (DESIGNATION, TYPES AND FUEL CAPACITY , ) |
- |
|
|
|
| 4/4.1.1 ( Volume of the oil hold in fuel tank) |
- |
|
|
|
| 6/6.1/Fig 1(Shape) and Fig. 2, 4, 5, 6 and 11(Dimensions) . (SHAPE AND DIMENSIONS /for designation OTR for roarer type burner and OTS for silencer type burner) |
- |
|
|
|
| 6/6.2/Fig 3(Shape) and Fig. 2, 4, 5, 11, 12, 14 and 16.(Dimensions) . (SHAPE AND DIMENSIONS /for designation OR for roarer
type burner and OS for silencer type burner) |
- |
|
|
|
| 7/7.1/7.1.2 (CONSTRUCTION) |
- |
|
|
|
| 7/7.1/7.1.3 (CONSTRUCTION/The stove shall be so made as to be firm on its base and the legs shall be so fitted as to have the bottom of the fuel container at least 13 mm clear of the ground on which stove stands.) |
- |
|
|
|
| 7/7.1/7.1.3 (CONSTRUCTION) |
- |
|
|
|
| 7/7.1/7.1.4 (CONSTRUCTION) |
- |
|
|
|
| 7/7.1/7.1.4 (CONSTRUCTION) |
- |
|
|
|
| 7/7.2- IS 8808 (Burner assembly) |
- |
|
|
|
| 7/7.3 (Pump) |
- |
|
|
|
| 7/7.4/7.4.1 (Pressure - Release Screw) |
- |
|
|
|
| 7/7.5 (Filler cap assembly) |
- |
|
|
|
| 7/7.7 (Pricker) |
- |
|
|
|
| 7/7.8 (Interchangeable Parts
) |
- |
|
|
|
| 7/7.9 Refer Table-2 (Strength of Body of Stove) |
- |
|
|
|
| 8 (Finish) |
- |
|
|
|
| 9/9.1/9.1.1 (Air Pressure Test) |
- |
|
|
|
| 9/9.1/9.1.2 (Safety Pressure Test) |
- |
|
|
|
| 9/9.1/9.1.3 ( Bursting Pressure Test) |
- |
|
|
|
| 9/9.2 Annex D (Fuel Consumption
) |
- |
|
|
|
| 9/9.4 Annex E. (Surface Temperature and Fuel Temperature Test (Type Test)) |
- |
|
|
|
| 9/9.5 Annex F. ( Combustion Efficiency Test (Type Test)/carbon monoxide/carbon dioxide
) |
- |
|
|
|
| 9/9.6 Annex F. (Resistance to Draught (Type Test)) |
- |
|
|
|
| 9/9.7 (Fuel Creep) |
- |
|
|
|
|
- |
-
" 2 nos.
Excluding Excl. thermal efficiency and threads,chemical tests |
| 14119 |
BIS, Eastern Regional Laboratory (ERL)
| None
| IS 14887 (2014) |
Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg food grains – Specification (first revision) |
- |
19750 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.2 (Unlaminated Fabric Mass ) |
- |
|
|
|
| 3.2 (Tapes – Width and Thickness
( IS 6192/IS 11197)) |
- |
|
|
|
| 3.2 (Tapes – Elongation at point of rupture
(IS 6192/IS 11197)) |
- |
|
|
|
| 3.2 (Tapes – Dimensional stability (PP)
(IS 11197)) |
- |
|
|
|
| 3.3.1 (Bottom seam (IS 10789)) |
- |
|
|
|
| 4.2 and Table 1 ii (Dimensions ) |
- |
|
|
|
| 5.2 and Table 1 iii (Ends per dm ) |
- |
|
|
|
| 5.2 and Table 1 iv (Picks per dm ) |
- |
|
|
|
| 4.2 and Table 1 v (Mass of sack ) |
- |
|
|
|
| 4.2 and Table 1 vi (Average breaking strength of fabric ) |
- |
|
|
|
| 4.2 and Table 1 vi (Breaking strength of bottom seam ) |
- |
|
|
|
| 4.2 and Table 1 viii (Elongation at break of fabric ) |
- |
|
|
|
| 4.2 and Table 1 x (Ash content ) |
- |
|
|
|
| 3.2 (Unlaminated Fabric Mass ) |
- |
|
|
|
| 3.2 (Tapes – Width and Thickness
( IS 6192/IS 11197)) |
- |
|
|
|
| 3.2 (Tapes – Elongation at point of rupture
(IS 6192/IS 11197)) |
- |
|
|
|
| 3.2 (Tapes – Dimensional stability (PP)
(IS 11197)) |
- |
|
|
|
| 3.3.1 (Bottom seam (IS 10789)) |
- |
|
|
|
| 4.2 and Table 1 ii (Dimensions ) |
- |
|
|
|
| 5.2 and Table 1 iii (Ends per dm ) |
- |
|
|
|
| 5.2 and Table 1 iv (Picks per dm ) |
- |
|
|
|
| 4.2 and Table 1 v (Mass of sack ) |
- |
|
|
|
| 4.2 and Table 1 vi (Average breaking strength of fabric ) |
- |
|
|
|
| 4.2 and Table 1 vi (Breaking strength of bottom seam ) |
- |
|
|
|
| 4.2 and Table 1 viii (Elongation at break of fabric ) |
- |
|
|
|
| 4.2 and Table 1 x (Ash content ) |
- |
|
|
|
| 4.2 and Table 1 x (Ash content ) |
- |
|
|
|
| 4.2 and Table 1 ix (Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering ) |
- |
|
|
|
|
- |
-
Complete |
| 14120 |
BIS, Central Laboratory (CL)
| None
| IS 13983 (1994) |
Stainless Steel Sinks For Domestic Purposes |
- |
Rs.14635/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4 (Type) |
- |
|
|
|
| 6 (Thickness of sheet/strip) |
- |
|
|
|
| 6 (Depth of bowl) |
- |
|
|
|
| 6 (Internal dimensions of the bowl) |
- |
|
|
|
| 6 (Bowl locating limits) |
- |
|
|
|
| 6 (Co-ordinating sizes) |
- |
|
|
|
| 7.1 (Consruction and workmanship) |
- |
|
|
|
| 7.3 (Drainers) |
- |
|
|
|
| 7.4 (Waste outlet) |
- |
|
|
|
| 7.5 (Tap holes) |
- |
|
|
|
| 7.6 (Overflows) |
- |
|
|
|
| Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304) (Carbon Content) |
- |
|
|
|
| Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304) (Sulphur Content) |
- |
|
|
|
| Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304) (Phouphorous Content) |
- |
|
|
|
| Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304) (Manganese Content) |
- |
|
|
|
| Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304) (Silicon Content) |
- |
|
|
|
| Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304) (Nitrogen Content) |
- |
|
|
|
| Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304) (Chromium Content) |
- |
|
|
|
| Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-04-Cr-19-Ni-19 (Numeric Symbol 304) (Nickel Content) |
- |
|
|
|
| Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302) (Carbon Content) |
- |
|
|
|
| Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302) (Sulphur Content) |
- |
|
|
|
| Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302) (Phouphorous Content) |
- |
|
|
|
| Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302) (Manganese Content) |
- |
|
|
|
| Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302) (Silicon Content) |
- |
|
|
|
| Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302) (Nitrogen Content) |
- |
|
|
|
| Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302) (Chromium Content) |
- |
|
|
|
| Cl. 5 , As per IS 5522-2014, Cl. 7.2 , Table 1 & 2 Grade Desig X-07-Cr-18-Ni-9 (Numeric Symbol 302) (Nickel Content) |
- |
|
|
|
|
- |
-
Material Grade/ designation as per relevant IS may please be declared. Sample dia > 3mm or thickness > 0.8 mm can only be tested;
Excluding Complete for Material test only; |
| 14121 |
BIS, Southern Regional Laboratory (SRL)
| None
| IS 3466 (1988) |
Specification For Masonry Cement |
- |
Please see remarks. View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.1 Table 1 i (Fineness
IS : 4031:1988) |
- |
|
|
|
| 3.1 Table 1 i (Fineness
IS : 4031:1988) |
- |
|
|
|
| 3.1 Table 1 ii a (Setting Time ( by Vicat Apparatus ),Initial
IS : 4031:1988) |
- |
|
|
|
| 3.1 Table 1 ii a (Setting Time ( by Vicat Apparatus ),Initial
IS : 4031:1988) |
- |
|
|
|
| 3.1 Table 1 ii a (Setting Time ( by Vicat Apparatus ),Initial
IS : 4031:1988) |
- |
|
|
|
| 3.1 Table 1 ii a (Setting Time ( by Vicat Apparatus ),Initial
IS : 4031:1988) |
- |
|
|
|
| 3.1 Table 1 ii a (Setting Time ( by Vicat Apparatus ),Initial
IS : 4031:1988) |
- |
|
|
|
| 3.1 Table 1 ii b (Setting Time ( by Vicat Apparatus ), Final
IS : 4031:1988) |
- |
|
|
|
| 3.1 Table 1 ii b (Setting Time ( by Vicat Apparatus ), Final
IS : 4031:1988) |
- |
|
|
|
| 3.1 Table 1 iii a (Soundness, Le-Chate1ier expansion
IS 4031:1988) |
- |
|
|
|
| 3.1 Table 1 iii a (Soundness, Le-Chate1ier expansion
IS 4031:1988) |
- |
|
|
|
| 3.1 Table 1 iii b (Soundness, Autoclave expansion
IS 4031:1988) |
- |
|
|
|
| 3.1 Table 1 iii b (Soundness, Autoclave expansion
IS 4031:1988) |
- |
|
|
|
| 3.1 Table 1 iv (Compretsive Strenqth 7 days
IS 4031:1988) |
- |
|
|
|
| 3.1 Table 1 iv (Compretsive Strenqth 7 days
IS 4031:1988) |
- |
|
|
|
| 3.1 Table 1 iv (Compretsive Strenqth 7 days
IS 4031:1988) |
- |
|
|
|
| 3.1 Table 1 iv (Compretsive Strenqth 7 days
IS 4031:1988) |
- |
|
|
|
| 3.1 Table 1 iv (Compretsive Strenqth 28 days
IS 4031:1988) |
- |
|
|
|
| 3.1 Table 1 iv (Compretsive Strenqth 28 days
IS 4031:1988) |
- |
|
|
|
| 3.1 Table 1 iv (Compretsive Strenqth 28 days
IS 4031:1988) |
- |
|
|
|
| 3.1 Table 1 iv (Compretsive Strenqth 28 days
IS 4031:1988) |
- |
|
|
|
|
- |
-
" 500 g
Excluding Excl Air Content and Water retention test |
| 14122 |
BIS, Southern Regional Laboratory (SRL)
| None
| IS 12600 (1989) |
Portland cement, low heat - specification |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6.1 (Fineness 4031 Part 2) |
- |
|
|
|
| 6.2.1 (Expansion by Le Chatelier- 4031 Part 3) |
- |
|
|
|
| 6.2.1 (Expansion by Autoclave- 4031 Part 3) |
- |
|
|
|
| 6.3 a) (Setting Time Initial- 4031 Part 5) |
- |
|
|
|
| 6.3 b) (Setting Time Final- 4031 Part 5) |
- |
|
|
|
| 6.3 a) (Setting Time Initial- 4031 Part 5) |
- |
|
|
|
| 6.3 b) (Setting Time Final- 4031 Part 5) |
- |
|
|
|
| 6.3 a) (Setting Time Initial- 4031 Part 5) |
- |
|
|
|
| 6.3 b) (Setting Time Final- 4031 Part 5) |
- |
|
|
|
| 6.3 a) (Setting Time Initial- 4031 Part 5) |
- |
|
|
|
| 6.3 b) (Setting Time Final- 4031 Part 5) |
- |
|
|
|
| 6.3 a) (Setting Time Initial- 4031 Part 5) |
- |
|
|
|
| 6.3 b) (Setting Time Final- 4031 Part 5) |
- |
|
|
|
| 6.4 a) (Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6) |
- |
|
|
|
| 6.4 b) (Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6) |
- |
|
|
|
| 6.4 c) (Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6) |
- |
|
|
|
| 6.4 a) (Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6) |
- |
|
|
|
| 6.4 b) (Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6) |
- |
|
|
|
| 6.4 c) (Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6) |
- |
|
|
|
| 6.4 a) (Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6) |
- |
|
|
|
| 6.4 b) (Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6) |
- |
|
|
|
| 6.4 c) (Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6) |
- |
|
|
|
| 6.4 a) (Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6) |
- |
|
|
|
| 6.4 b) (Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6) |
- |
|
|
|
| 6.4 c) (Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6) |
- |
|
|
|
| 6.4 a) (Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6) |
- |
|
|
|
| 6.4 b) (Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6) |
- |
|
|
|
| 6.4 c) (Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6) |
- |
|
|
|
| 6.4 a) (Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6) |
- |
|
|
|
| 6.4 b) (Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6) |
- |
|
|
|
| 6.4 c) (Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6) |
- |
|
|
|
| 6.4 a) (Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6) |
- |
|
|
|
| 6.4 b) (Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6) |
- |
|
|
|
| 6.4 c) (Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6) |
- |
|
|
|
|
- |
-
" 8Kg+1kg
Excluding Excl Heat of Hydration |
| 14123 |
BIS, Central Laboratory (CL)
| None
| IS 7809 : Part 3 : Sec 1 (1986) |
Specification for pressure sensitive adhesive insulating tapes for electrical purposes: Part 3 requirements or individual materials: Sec 1 plasticized polyvinylchloride tapes with non - Thermosetting adhesive (First Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.1 (Marking, Cl.9 of IS 7809 (Part 1):1975) |
- |
|
|
|
| 3.1 (Marking, Cl.9 of IS 7809 (Part 1):1975) |
- |
|
|
|
| 3.1 (Marking, Cl.9 of IS 7809 (Part 1):1975) |
- |
|
|
|
| 3.1 (Marking, Cl.9 of IS 7809 (Part 1):1975) |
- |
|
|
|
| 3.1 (Marking, Cl.9 of IS 7809 (Part 1):1975) |
- |
|
|
|
| 3.1 (Marking, Cl.9 of IS 7809 (Part 1):1975) |
- |
|
|
|
| 3.1 (Marking, Cl.9 of IS 7809 (Part 1):1975) |
- |
|
|
|
| 3.1 (Marking, Cl.9 of IS 7809 (Part 1):1975) |
- |
|
|
|
| 3.1 (Marking, Cl.9 of IS 7809 (Part 1):1975) |
- |
|
|
|
| 2.1.1 (Type and Desiganation) |
- |
|
|
|
| 2.1.2 (Type and Desiganation) |
- |
|
|
|
| 3.1 (General Requirments,as per IS 7809 (Part 1 ) :1975 ) |
- |
|
|
|
| 3.2 (General Requirments,as per IS 7809 (Part 1 ) :1975 ) |
- |
|
|
|
| 3.3 (General Requirments,as per IS 7809 (Part 1 ) :1975 ) |
- |
|
|
|
| 3.4 (General Requirments,as per IS 7809 (Part 1 ) :1975 ) |
- |
|
|
|
| 4.1 (Performance Requirments) |
- |
|
|
|
| 4.2 (Performance Requirments) |
- |
|
|
|
| 4.3 (Performance Requirments) |
- |
|
|
|
| 4.4 (Performance Requirments) |
- |
|
|
|
| 4.5 (Performance Requirments) |
- |
|
|
|
| 4.6 (Flammability ,Cl 6 of IS 7809 (Part 2): 1977) |
- |
|
|
|
| 4.6 (Flammability ,Cl 6 of IS 7809 (Part 2): 1977) |
- |
|
|
|
| 4.6 (Flammability ,Cl 6 of IS 7809 (Part 2): 1977) |
- |
|
|
|
| 4.7 (Electrolytic corrosion) |
- |
|
|
|
| 4.8 (Stability to accelerated ageing ) |
- |
|
|
|
| 4.9 (Insulation resistance test) |
- |
|
|
|
| 3.1 ( Minimum Storage Life Cl. 7.1 of IS 7809(Part 1) :1975) |
- |
|
|
|
| 3.1 (Appearance) |
- |
|
|
|
| 3.1 (Minimum Storage Life ,Dimensions , Cl. 7.1 of IS 7809(Part 1) :1975) |
- |
|
|
|
| 3.1 (Minimum Storage Life ,Dimensions , Cl. 7.1 of IS 7809(Part 1) :1975) |
- |
|
|
|
| 3.1 (Minimum Storage Life ,Dimensions , Cl. 7.1 of IS 7809(Part 1) :1975) |
- |
|
|
|
| 3.1 (Minimum Storage Life ,Dimensions , Cl. 7.1 of IS 7809(Part 1) :1975) |
- |
|
|
|
| 3.1 (Marking, Cl.9 of IS 7809 (Part 1):1975) |
- |
|
|
|
| Cl. 4.1 of IS 7809-1-1975 (Appearance) |
- |
|
|
|
| Cl. 5.1 of IS 7809-1-1975 (Freedom from defects) |
- |
|
|
|
|
- |
-
- |
| 14124 |
BIS, Southern Regional Laboratory (SRL)
| None
| IS 12337 (1988) |
Specification for manually operated fertilizer broadcaster |
- |
Rs 600/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1 (Constructional Requirements- Hopper) |
- |
|
|
|
| 4.1.1 (Constructional Requirements- Hopper) |
- |
|
|
|
| 4.2 (Constructional Requirements- Spreading Disc) |
- |
|
|
|
| 4.3 (Constructional Requirements- Feed Control Mechanism) |
- |
|
|
|
| 4.4 (Constructional Requirements- Agitator) |
- |
|
|
|
| 4.5 (Constructional Requirements- Gear Box and Gears) |
- |
|
|
|
| 4.6 (Constructional Requirements- Crank) |
- |
|
|
|
| 4.7 (Constructional Requirements- Straps) |
- |
|
|
|
| 4.7.1 (Constructional Requirements- Straps (Strap Drop Test)) |
- |
|
|
|
| 4.7 (Constructional Requirements- Straps (cushion width)) |
- |
|
|
|
| 4.7 (Constructional Requirements- Straps (cushion thickness)) |
- |
|
|
|
| 4.7.1 (Constructional Requirements- Straps (Strap Drop Test)) |
- |
|
|
|
| 4.8 (Constructional Requirements- Bearings) |
- |
|
|
|
| 4.9 (Constructional Requirements- Total Mass) |
- |
|
|
|
| 4.10. (Constructional Requirements) |
- |
|
|
|
| 5 (Capacity) |
- |
|
|
|
| 6.1 (Workmanship and Finish) |
- |
|
|
|
| 6.2 (Workmanship and Finish) |
- |
|
|
|
|
- |
-
" 1 No.+ 15 kg of Fertilizer
excluding chemical tests |
| 14125 |
BIS, Central Laboratory (CL)
| None
| IS 374 (2019) |
Specification for electric ceiling type fans and regulators (Third Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7 (Classification (as per Cl.6 of IS 302-2-80 :2017)) |
- |
|
|
|
| 7 (Classification (as per Cl.6 of IS 302-2-80 :2017)) |
- |
|
|
|
| 7 (Classification (as per Cl.6 of IS 302-2-80 :2017)) |
- |
|
|
|
| 7 (Classification (as per Cl.6 of IS 302-2-80 :2017)) |
- |
|
|
|
| 8.1 (Marking (as per Cl. 7 of IS 302-2-80:2017)) |
- |
|
|
|
| 8.1,a (Marking ) |
- |
|
|
|
| 8.1,b (Marking ) |
- |
|
|
|
| 8.1,c (Marking ) |
- |
|
|
|
| 8.1,d (Marking ) |
- |
|
|
|
| 8.1,e (Marking ) |
- |
|
|
|
| 8.1,f (Marking ) |
- |
|
|
|
| 8.1,g (Marking ) |
- |
|
|
|
| 8.2 (Marking ) |
- |
|
|
|
| 8.3,a (Marking ) |
- |
|
|
|
| 8.3,b (Marking ) |
- |
|
|
|
| 8.3,c (Marking ) |
- |
|
|
|
| 8.3,d (Marking ) |
- |
|
|
|
| 8.3,e (Marking ) |
- |
|
|
|
| 8.4 (Marking ) |
- |
|
|
|
| 8 (Marking (as per Cl. 7.1 of IS 302-2-80:2017)) |
- |
|
|
|
| 8 (Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1 (f) of IS 302-1:2008)) |
- |
|
|
|
| 8 (Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1(g) of IS 302-1:2008)) |
- |
|
|
|
| 8 (Marking (as per Cl.7.12.1(a) of IS 302-2-80:2017)) |
- |
|
|
|
| 6.2 (Rating) |
- |
|
|
|
| 9 (Protection against access to live parts (as per Cl.8 of IS 302-2-80 :2017)) |
- |
|
|
|
| 9 (Power Input & current (as per Cl.10 of IS 302-2-80 :2017)) |
- |
|
|
|
| 9 ( Heating (as per Cl.11 of IS 302-2-80 :2017)) |
- |
|
|
|
| 9 ( Heating (as per Cl.11 of IS 302-2-80 :2017)) |
- |
|
|
|
| 9 ( Heating (as per Cl.11 of IS 302-2-80 :2017)) |
- |
|
|
|
| 9 ( Heating (as per Cl.11 of IS 302-2-80 :2017)) |
- |
|
|
|
| 9 (Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017)) |
- |
|
|
|
| 9 (Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017)) |
- |
|
|
|
| 9 (Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) ) |
- |
|
|
|
| 9 (Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) ) |
- |
|
|
|
| 9 (Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008)) |
- |
|
|
|
| 9 (Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008)) |
- |
|
|
|
| 9 (Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017)) |
- |
|
|
|
| 9 (Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017)) |
- |
|
|
|
| 9 (Construction (as per Cl.22.101 of IS 302-2-80 :2017)) |
- |
|
|
|
| 9 (Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008)) |
- |
|
|
|
| 9 (Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008)) |
- |
|
|
|
| 9 (Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008)) |
- |
|
|
|
| 9 (Components (as per Cl.24.103 of IS 302-2-80 :2017)) |
- |
|
|
|
| 9 (Components (as per Cl.24.104 of IS 302-2-80 :2017)) |
- |
|
|
|
| 9 (Supply Connection and External Flexible cords (as per Cl.25 of IS 302-2-80 :2017)) |
- |
|
|
|
| 9 (Terminals for External conductors (as per Cl.26 of IS 302-2-80 :2017)) |
- |
|
|
|
| 9 (Provision for earthing (as per Cl.27 of IS 302-2-80 :2017)) |
- |
|
|
|
| 9 (Provision for earthing (as per Cl.27 of IS 302-2-80 :2017)) |
- |
|
|
|
| 9 (Provision for earthing (as per Cl.27 of IS 302-2-80 :2017)) |
- |
|
|
|
| 9 (Screw and connections (as per Cl.28 of IS 302-2-80 :2017)) |
- |
|
|
|
| 9 (Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017)) |
- |
|
|
|
| 9 (Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017)) |
- |
|
|
|
| 9 (Resistance to fire (Glow wire Test) (as per Cl.30 of IS 302-2-80 :2017)) |
- |
|
|
|
| 9 (Resistance to rusting (as per Cl.31 of IS 302-2-80 :2017)) |
- |
|
|
|
| 10.1 (Speed Regulators) |
- |
|
|
|
| 10.2 (Speed Regulators) |
- |
|
|
|
| 10.2 (Speed Regulators) |
- |
|
|
|
| 10.2 (Speed Regulators) |
- |
|
|
|
| 10.4 (Speed Regulators) |
- |
|
|
|
| 10.5 (Speed Regulators) |
- |
|
|
|
| 10.6 (Speed Regulators) |
- |
|
|
|
| 11.1 (Starting) |
- |
|
|
|
| 12 (Interchangeability) |
- |
|
|
|
| 14.4 (Measurement of Speed of the Fan ) |
- |
|
|
|
| 14.4 (Measurement of Speed of the Fan ) |
- |
|
|
|
| 14.5 (Measurement of Power factor and Power Input) |
- |
|
|
|
| 14.5 (Measurement of Power factor and Power Input) |
- |
|
|
|
| 16 (Endurance Test) |
- |
|
|
|
| 16 (Endurance Test) |
- |
|
|
|
| 9 (Resistance to fire (Glow wire Test) (as per Cl.30 of IS 302-2-80 :2017)) |
- |
|
|
|
| 16 (Endurance Test) |
- |
|
|
|
| (Cl. 17 of IS 302-2-80 :2017) (Overload protection of transformers and associated circuits) |
- |
|
|
|
| (Cl.4.4 of IS 374: 2019) (Bearings) |
- |
|
|
|
| (Cl. 4.5 of IS 374: 2019) (Brushless DC Motor) |
- |
|
|
|
| (Cl.4.6 of IS 374: 2019) (Enclosure) |
- |
|
|
|
| (Cl. 7.6 of IS 302 Part 1) (Marking and Instructions) |
- |
|
|
|
| Cl. 7.8 of IS 302-2-80 :2017 (MARKING AND INSTRUCTIONS) |
- |
|
|
|
| (Cl. 7.12 of IS 302-2-80 :2017) (Marking and Instructions) |
- |
|
|
|
| (Cl. 7.12.1 of IS 302-2-80 :2017) (Marking and Instructions) |
- |
|
|
|
| (Cl. 7.12.5 of IS 302-1: 2008) (Marking and Instructions) |
- |
|
|
|
| (Cl. 7.12.5 of IS 302-1: 2008) (Marking and Instructions) |
- |
|
|
|
| (Cl. 7.12.5 of IS 302-1: 2008) (Marking and Instructions) |
- |
|
|
|
| (Cl. 7.12.7 of IS 302-1: 2008 (Marking and Instructions) |
- |
|
|
|
| (Cl. 7.13 of IS 302-1: 2008) (Marking and Instructions) |
- |
|
|
|
| (Cl. 7.14 of IS 302-1: 2008) (Marking and Instructions) |
- |
|
|
|
| (Cl. 10.1 of IS 374: 2019) (SPEED REGULATORS) |
- |
|
|
|
| (Cl. 10.3 of IS 374: 2019) (SPEED REGULATORS) |
- |
|
|
|
| (Cl. 10.4 of IS 374: 2019) (SPEED REGULATORS) |
- |
|
|
|
| (Cl. 10.7 of IS 374: 2019) (SPEED REGULATORS) |
- |
|
|
|
| (Cl. 10.7 of IS 374: 2019) (SPEED REGULATORS) |
- |
|
|
|
| (Cl. 10.8 of IS 374: 2019) (SPEED REGULATORS) |
- |
|
|
|
| (Cl. 11.2 of IS 374: 2019) (STARTING) |
- |
|
|
|
| (Cl. 13 of IS 374: 2019) (SILENT OPERATION) |
- |
|
|
|
| (Cl. 15.1 of IS 374: 2019) (PERFORMANCE REQUIREMENTS) |
- |
|
|
|
| (Cl. 15.1 of IS 374: 2019) (PERFORMANCE REQUIREMENTS) |
- |
|
|
|
| (Cl. 17 of IS 374: 2019 (Test for Harmonic Distortion) |
- |
|
|
|
| (Cl. 8.2 of IS 302-1: 2008) (PROTECTION AGAINST ACCESS TO LIVE PARTS) |
- |
|
|
|
| (Cl. 11 of IS 302-1: 2008) (HEATING) |
- |
|
|
|
| (Cl. 15 of IS 302-1: 2008) (MOISTURE RESISTANCE) |
- |
|
|
|
| (Cl. 15 of IS 302-1: 2008) (MOISTURE RESISTANCE) |
- |
|
|
|
| (Cl. 15 of IS 302-1: 2008. (MOISTURE RESISTANCE) |
- |
|
|
|
| (Cl. 17 of IS 302-1: 2008) (OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS) |
- |
|
|
|
| (Cl. 17 of IS 302-1: 2008) (OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS) |
- |
|
|
|
| (Cl. 19.13 of IS 302-1: 2008) (ABNORMAL OPERATION) |
- |
|
|
|
| (Cl. 19.7 of IS 302-1: 2008) (ABNORMAL OPERATION) |
- |
|
|
|
| (Cl. 19 of IS 302-2-80 :2017) (ABNORMAL OPERATION) |
- |
|
|
|
| (Cl. 19.13 of IS 302-1: 2008) (ABNORMAL OPERATION) |
- |
|
|
|
| (Cl. 19.13 of IS 302-1: 2008) (ABNORMAL OPERATION) |
- |
|
|
|
| (Cl. 19.13 of IS 302-1: 2008) (ABNORMAL OPERATION) |
- |
|
|
|
| (Cl. 19.13 of IS 302-1: 2008) (ABNORMAL OPERATION) |
- |
|
|
|
| (Cl. 20.102 of IS 302-2-80 :2017) (STABILITY AND MECHANICAL HAZARDS) |
- |
|
|
|
| (Cl. 22.2 of IS 302-1: 2008) (CONSTRUCTION) |
- |
|
|
|
| (Cl. 22.14 of IS 302-1: 2008) (CONSTRUCTION) |
- |
|
|
|
| (Cl. 22.18 of IS 302-1: 2008) (Electric Ceiling type fan-Specification) |
- |
|
|
|
| (Cl. 22.21 of IS 302-1: 2008) (CONSTRUCTION) |
- |
|
|
|
| (Cl. 22.22 of IS 302-1: 2008) (CONSTRUCTION) |
- |
|
|
|
| (Cl. 22.41 of IS 302-1: 2008) (CONSTRUCTION) |
- |
|
|
|
| (Cl. 22.44 of IS 302-1: 2008) (CONSTRUCTION) |
- |
|
|
|
| (Cl. 22.101 of IS 302-2-80: 2017) (CONSTRUCTION) |
- |
|
|
|
| (Cl. 23.1 of IS 302-1: 2008) (INTERNAL WIRING) |
- |
|
|
|
| (Cl. 23.2 of IS 302-1: 2008) (INTERNAL WIRING) |
- |
|
|
|
| (Cl. 23.4 of IS 302-1: 2008) (INTERNAL WIRING) |
- |
|
|
|
| (Cl. 23.5 of IS 302-1: 2008) (INTERNAL WIRING) |
- |
|
|
|
| (Cl. 23.6 of IS 302-1: 2008) (INTERNAL WIRING) |
- |
|
|
|
| (Cl. 23.7 of IS 302-1: 2008) (INTERNAL WIRING) |
- |
|
|
|
| (Cl. 23.9 of IS 302-1: 2008) (INTERNAL WIRING) |
- |
|
|
|
| (Cl. 23.10 of IS 302-1: 2008) (INTERNAL WIRING) |
- |
|
|
|
| (Cl. 24.1 of IS 302-1: 2008) (COMPONENTS) |
- |
|
|
|
| (Cl. 24.5 of IS 302-1: 2008) (COMPONENTS) |
- |
|
|
|
| (Cl. 24.105 of IS IS 302-2-80 :2017) (COMPONENTS) |
- |
|
|
|
| (Cl. 26.1 of IS 302-1: 2008) (TERMINALS FOR EXTERNAL CONDUCTORS) |
- |
|
|
|
| (Cl. 26.8 of IS 302-1: 2008) (TERMINALS FOR EXTERNAL CONDUCTORS) |
- |
|
|
|
| (Cl. 26.9 of IS 302-1: 2008) (TERMINALS FOR EXTERNAL CONDUCTORS) |
- |
|
|
|
| (Cl. 26.10 of IS 302-1: 2008) (TERMINALS FOR EXTERNAL CONDUCTORS) |
- |
|
|
|
| (Cl. 27.1 of IS 302-1: 2008) (PROVISION FOR EARTHING) |
- |
|
|
|
| (Cl. 27.2 of IS 302-1: 2008) (PROVISION FOR EARTHING) |
- |
|
|
|
| (Cl. 27.4 of IS 302-1: 2008) (PROVISION FOR EARTHING) |
- |
|
|
|
| (Cl. 27.5 of IS 302-1: 2008) (PROVISION FOR EARTHING) |
- |
|
|
|
| (Cl. 28.4 of IS 302-1: 2008) (SCREWS AND CONNECTIONS) |
- |
|
|
|
| (Cl. 30.2 of IS 302-1: 2008) (RESISTANCE TO HEAT AND FIRE) |
- |
|
|
|
| (Cl. 30.2 of IS 302-1: 2008) (RESISTANCE TO HEAT AND FIRE) |
- |
|
|
|
| (Cl. 32 of IS 302-1: 2008) (Radiation, toxicity and similar hazards) |
- |
|
|
|
|
- |
-
- |
| 14126 |
BIS, Central Laboratory (CL)
| None
| IS 2745 (1983) |
Specification for non - Metal helmet for firemen and civil defence personnel (Second Revision) |
- |
1500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 3 (Shell, Protective padding, Retention System & Neck protector) |
- |
|
|
|
| Cl 5 ( Shell, Protective Padding, Brim, Head band, Chin Strap, Cradle, Neck Protector & Visor) |
- |
|
|
|
| Cl 6 (Workmanship & Finish) |
- |
|
|
|
| Cl 7 (Mass) |
- |
|
|
|
|
- |
-
Excluding Test facility not available for Cl 4.1 sizes, Cl 9.1 Shock Absorption Test, Cl 9.2 Penetration Resistance, Cl 9.3 Strenth of Retention system; |
| 14127 |
BIS, Central Laboratory (CL)
| None
| IS 9562 (1980) |
Specification for non - Metal helmet for police force |
- |
Rs.2100/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 3 (Shell, Protective padding & Retention System) |
- |
|
|
|
| Cl 5 ( Shell, Protective Padding, Brim, Head band, Chin Strap, Cradle, Neck Protector & Visor) |
- |
|
|
|
| Cl 6 (Workmanship & Finish) |
- |
|
|
|
| Cl 7 (Mass) |
- |
|
|
|
|
- |
-
Exclusion Test facility not available for Cl 4.1 sizes, Cl 9.1 Shock Absorption Test, Cl 9.2 Penetration Resistance, Cl 9.3 Strenth of Retention system, Cl 9. Firing Test, Cl 9.6 Flammability Test; |
| 14128 |
BIS, Eastern Regional Laboratory (ERL)
| None
| IS 778 (1984) |
Specification for 2010 copper alloy gate, globe and check valves for waterworks purposes (Fourth Revision) |
For all classes except tests mentioned in remarks |
Rs 4500/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3 (Nominal Sizes ) |
- |
|
|
|
| 4 (Classification ) |
- |
|
|
|
| 5 (Types) |
- |
|
|
|
| 7.1 (Valve Bodie - IS 778) |
- |
|
|
|
| 7.1.1 (Body End Ports -IS 778) |
- |
|
|
|
| 7.1.2 (Water-Way Area - IS 778) |
- |
|
|
|
| 7.1.3 (Screwed Body End -IS 778) |
- |
|
|
|
| 7.1.3.1-Table2 (length of threaded portion in screwed end valves - IS 778) |
- |
|
|
|
| 7.1.3.1 (Screwed Body End -IS 778) |
- |
|
|
|
| 7.1.5 (Wedge and Disc Guides in the Bodies of Gate Valves - IS 778) |
- |
|
|
|
| 7.2.1 (Bonnets - IS 778) |
- |
|
|
|
| 7.2.1.1 (Bonnets - IS 778) |
- |
|
|
|
| 7.2.1.2 (number of engaged threads - IS 778) |
- |
|
|
|
| 7.2.1.2 (pitch of threads - IS 778) |
- |
|
|
|
| 7.2.1.3 (Bonnets - IS 778) |
- |
|
|
|
| 7.3 (Stuffing Box - IS 778) |
- |
|
|
|
| 7.4 (Gland - IS 778) |
- |
|
|
|
| 7.4.1 (Gland nut - IS 778) |
- |
|
|
|
| 7.6.1 (Stem - IS 778) |
- |
|
|
|
| 7.6.2 (Threads of Stem - IS 778) |
- |
|
|
|
| 7.6.3 (actuating threads - IS 778) |
- |
|
|
|
| 7.6.4 (Length of Stem - IS 778) |
- |
|
|
|
| 7.6.5 (Upper end of Stem - IS 778) |
- |
|
|
|
| 7.6.7 (Non-rising Stem - IS 778) |
- |
|
|
|
| 7.6.6 (Rising Stem - IS 778) |
- |
|
|
|
| 7.7.1 (Wedge-IS 778) |
- |
|
|
|
| 7.7.2 (Wedge-IS 778) |
- |
|
|
|
| 7.7.3 (Double disc - IS 778) |
- |
|
|
|
| 7.7.3.1 (Spreading assembly - IS 778) |
- |
|
|
|
| 7.7.3.2 (Disc - IS 778) |
- |
|
|
|
| 7.10.1 (Body Seats - IS 778) |
- |
|
|
|
| 7.10.1 (Seat ring - IS 778) |
- |
|
|
|
| 7.11 (Handwheel - IS 778) |
- |
|
|
|
| 7.11 (Handwheel - IS 778) |
- |
|
|
|
| 8.1- Table 4 (Thickness of Body and Bonnet- IS 778) |
- |
|
|
|
| 8.2 - Table 5 (Flat to Flat size -IS 778 ) |
- |
|
|
|
| 8.3 - Table 6 (Width of end - IS 778) |
- |
|
|
|
| 8.4 - Table 7 (Stem Diameters - IS 778) |
- |
|
|
|
| 8.5 - Table 8 (Size of packing space - IS 778) |
- |
|
|
|
| 8.5 - Table 8 (Depth of stuffing box - IS 778) |
- |
|
|
|
| 8.5 - Table 8 (Dia of stuffing box - IS 778) |
- |
|
|
|
| 8.6- Table 9 to Table 12 (End to end/ centre to ends/ Face to face/Centre to face dimension ) |
- |
|
|
|
| 6- Table 1-i) (Brass(Body)-Cl 7 and table 1 of IS 1264) |
- |
|
|
|
|
- |
-
Facility not available for hydraulic test & Thread measurement |
| 14129 |
BIS, Southern Regional Laboratory (SRL)
| None
| IS 8329 (2000) |
Centrifugally cast (Spun) ductile iron pressure pipes for water, gas and sewage - Specification (Third Revision) |
- |
Rs.7800/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 10 (Hardness & Tensile Test) |
- |
|
|
|
| Cl 11 (Hydrostatic Test) |
- |
|
|
|
| Cl 13 (Length, Diameter, Wall Thickness & Ovality) |
- |
|
|
|
|
- |
-
" 1 No.
Excluding Excl hydrostatic test, chemical facilty. Facility for preparation of test specimen not available. |
| 14130 |
BIS, Central Laboratory (CL)
| None
| IS 2925 (1984) |
Specification for industrial safety helmets (Second Revision) |
- |
Rs 7770/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.1 (Shell) |
- |
|
|
|
| 3.3 (Metal Parts) |
- |
|
|
|
| 4.1 (Sizes) |
- |
|
|
|
| 5.1 (Shell) |
- |
|
|
|
| 5.2 (Harness) |
- |
|
|
|
| 5.3 (Chin Strap or Nape Strap) |
- |
|
|
|
| 6.1 (Workmanship & Finish) |
- |
|
|
|
| 7.1 (Mass) |
- |
|
|
|
| 8.1 (Shock Absorption Resistance) |
- |
|
|
|
| 8.2 (Penetration Resistance) |
- |
|
|
|
| 8.4 (Electrical Resistance) |
- |
|
|
|
| 8.5 (Water Absorption) |
- |
|
|
|
| 8.6 (Heat Resistance) |
- |
|
|
|
| 3.1 (Shell) |
- |
|
|
|
|
- |
-
- |
