BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15123 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

14131

BIS, Northern Regional Laboratory (NRL)

None

IS 2465 (1984)

Specification for cables for motor vehicles (Second Revision)

Single core PVC Insulated Unsheathed: Rs. 11030/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.1 (Insulation)	-
7.3 (Insulation)	-
8 (Core Identification)	-
9 (Laying up of cores)	-
10.1.1 (Sheathing )	-
10.2 (Sheathing )	-
3 & 6 (Flexibility class)	-
3 & 6 (Construction)	-
3 & 6 (Diameter of wire(mm))	-
3 & 6 (Annealing test)	-
3 & 6 (Persulphate Test)	-
3 & 6 (Conductor resistance Test (ohm/km at 20˚c))	-
7.2, 10.3, 11 (Dimensions & thickness )	-
7.2, 10.3, 11 (Dimensions & thickness )	-
7.2, 10.3, 11 (Overall Dimension (mm))	-
4.2 & 12.1 (Without Ageing For Insulation Tensile Strength (N/mm²))	-
4.2 & 12.1, (f), 1 (elongation at break (N/mm²))	-
4.2 & 12.1, (f), 1 (Tensile Strength at break (N/mm²))	-
4.2 & 12.1, (e), 1 (elongation test at break)	-
4.2 & 12.1, (e), 1 (Tensile strength at break)	-
4.2 & 12.1, (f), 2 (Ageing in air oven)	-
4.2 & 12.1, (f), 3 (Ageing in oxygen bomb)	-
4.2 & 12.1, (e), 2 (After Ageing in air oven)	-
4.2 & 12.1, (e), 3 (Loss of mass test (mg/cm²) of Insulation)	-
4.2 & 12.1, (e), 3 (Loss of mass test (mg/cm²) of Sheath)	-
4.2 & 12.1, (e), 4 (Hot deformation test (%) of Insulation)	-
4.2 & 12.1, (e), 4 (Hot deformation test (%) of Sheath)	-
4.2 & 12.1, (e), 5 (Heat Shock Test of Insulation)	-
4.2 & 12.1, (e), 5 (Heat Shock Test of Sheath)	-
4.2 & 12.1, (e), 6 (Shrinkage Test (%) of Insulation)	-
4.2 & 12.1, (e), 6 (Shrinkage Test (%) of Sheath)	-
14 (High Voltage Test)	-
22.1 (FLAMMABILITY TEST)	-
22.1 (FLAMMABILITY TEST)	-
23.1 (Manufacturer's Identification)	-
23.1 (Manufacturer's Identification)	-
24.1 (PACKING AND MARKING)	-
24.2 (PACKING AND MARKING)	-
24.2.1 (PACKING AND MARKING)	-

-
"Complete for general wiring only & Partial for PVC Insulation ignition cable Excluding Cl. 16 capacitance, Cl. 18 Effect of heat on flexibility"

14132

BIS, Central Laboratory (CL)

None

IS 4151 (1993.0)

Protective helmets for motorcycle riders - Specification

testing charges for the product are Rs. 27300/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Shell)	-
4.5 (Metal Parts)	-
6.1 (General)	-
6.2 (Shell)	-
6.3 (Protactive Padding)	-
6.4 (Retention System)	-
6.7 (Peripheral Vision)	-
6.8 (Workmanship and Finish)	-
7.2 (Impact Absorption Test)	-
7.3 (Rigidity Test)	-
7.4 (Projections and Surface Friction Test)	-
7.5 (Dynamic Test of Retention System)	-
7.6 (Audibility Test)	-
7.7 (Retention Test of Helmet)	-
7.8 (Micro-Slip Test of the Chin Strap)	-
7.9 (Test for Resistance to Abrasion of the Chin Strap )	-
7.10.2 (Ease of Release)	-
7.10.3 (Durability of Quick Release Mechanism)	-

-
IS superseded by newer version;

14133

BIS, Southern Regional Laboratory (SRL)

None

IS 1038 (1983)

Specification For Steel Doors, Windows And Ventilators

3000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1. (Size-Height)	-
4.1 (Size-Width)	-
4.1. (Size-Height)	-
4.1 (Size-Width)	-
4.1. (Size-Height)	-
4.1 (Size-Width)	-
4.3 (Designation)	-
6.1.1.1 (Visual Inspection Test)	-
6.2 (Side Hung Shutter- Thickness of hinge)	-
6.2 (Side Hung Shutter- Pin diameter)	-
6.2 (Side Hung Shutter)	-
6.2 (Side Hung Shutter-Width of hinge)	-
6.2.2 & 6.2.2.1 (Handle and Handle Plate-Material of handel )	-
6.2.2 & 6.2.2.1 (Handle and Handle Plate- Thicknesss of handle)	-
6.2.2 & 6.2.2.1 (Handle and Handle Plate-Height of handle plate)	-
6.2.3 (Peg Stay - Material)	-
6.2.3 (Peg Stay - Thickness)	-
6.2.3 (Peg Stay )	-
6.3 (Top Hung Ventilator)	-
6.3 (Top Hung Ventilator-Thickness of hinge)	-
6.3 (Top Hung Ventilator-Pin diameter)	-
6.3 (Top Hung Ventilator-Width of hinge)	-
7.1 (Position of Holes)	-
7.2 Table 2 (Position of Fixing Screws)	-
7.2 Table 2 (Lugs-A)	-
7.2 Table 2 (Lugs-B)	-
7.2 Table 2 (Lugs-C)	-
7.2 Table 2 (Lugs-D)	-
7.2 Table 2 (Lugs-E)	-
6.2.3 (Peg Stay - Dimensions-F)	-
7.2 Table 2 (Lugs-G)	-
8 (Finish)	-
9 (Glazing)	-

-
" 1+1 NO. Excluding Excl. micro and macro examination & Fillet weld test

14134

BIS, Southern Regional Laboratory (SRL)

None

IS 4308 (2019)

Dry Chemical Powders for Fire Fighting — BC, ABC and D Types — Specification ( Third Revision )

Rs 5770/- for both ordinary type & foam compatible type View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 5 Table 1(iii) (Apparent density (Declared value by the manufacturer))	-
Clause 5 Table 1(iv) (Particle size / sieve analysis (Declared value by the manufacturer))	-
Clause 5 Table 1(vi) (Water repellency)	-
Clause 5 Table 1(vii) (Moisture content)	-
Clause 5 Table 1(xii) (colour)	-

-
" 5 kg Excluding Rate of flow, Foam compatibility, Fire Test, Temperature Resistance Test , chemical constituents

14135

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING AND TECHNOLOGY (CIPET):CSTS-BHOPAL

8100534

IS 5175 (2014)

Fibre ropes – Polypropylene split film, monofilament and multifilament (PP2) and polypropylene high- tenacity multifilament (PP3) – 3-, 4-, 8- and 12-strand ropes (third revision)

6300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4( Designation)	-	0	Nil
Cl 5(General Requirements)	-	3950	Nil
Cl 6 & Table 1,2 or 3(Reference Number.)	-	750	Nil
Cl 6 & Table 1,2 or 3(Linear Density)	-	500	Nil
Cl 6 & Table 1,2 or 3(Breaking Force)	-	1100	Nil

31 Dec, 2026

-
-

14136

MSME TESTING CENTRE (WR), MUMBAI

7119404

IS 694 (2010)

Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 450/750 v (Fourth Revision)

PVC insulated unsheathed & sheathed cables/cords 110V

22000 View breakup
Type test ₹12000 Singlecore/Unsheathed/01,₹16000 Singlecore/Sheathed/01,₹20000 Singlecore/Unsheathed/FR,₹22000 Singlecore/Sheathed/FR; Multicore: 25% extra for each additional core on single core rate, Cat.02 ₹5000/- extra

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Tensile test (for Al)- After Stranding)	-	1800	Type test: i)Single core/Unsheathed/01:Rs.12,000/-, ii) Single core/sheathed/01:Rs.16000/- , iii)Single core/Unsheathed/FR:Rs.18000/-, iv)Single core/sheathed/FR:Rs.22000/-
4.1(Tensile test (for Al)-Before Stranding)	-	1800	Acceptance test: i)Single core/Unsheathed/01:Rs.9,000/-, ii) Single core/sheathed/01:Rs.12000/- , iii)Single core/Unsheathed/FR:Rs.13500/-, iv)Single core/sheathed/FR:Rs.16500/-
4.1(Annealing test (for copper))	-	1800	For Multicore cables:25%extra for each additional core on single core rate
4.1(Wrapping test (for Al))	-	1500	-
4.2(Conductor resistance test)	-	1800	-
Table 1(Category Code)	-	5000	For Cat.02 Rs.5000/- additional on above test charge
table 1 e) 3) (Volume Resistivity - Maximum temp)	-	1800	1800
table 1 e) 3) (IR constant- Room temp )	-	1800	1800
table 1 e) 3) (IR constant- max. Temp)	-	1800	1800
5.1(Insulation)	-	2000	2000
Table 1 iii) d) 7)(Thermal stability- Sheath )	-	1800	1800
Table 1 iii) d) 4)(Shrinkage- Sheath )	-	3500	3500
Table 1 iii) c) 5)(Heat shock-Insulation )	-	1800	1800
Table 1 iii) d) 6)(Hot deformation -Indentation depth - Sheath )	-	2000	2000
Table 1 iii) d) 8)(Cold bend for sheath)	-	3500	3500
Table 1 iii) d) 9)(Cold impact for sheath)	-	3500	3500
10.4(Flammability test- Unaffected portion)	-	1800	1800
10.5(Oxygen index)	-	3500	3500
10.7(Temperature index)	-	3500	3500
Table 1 iii) d) 2)(Loss of mass- Sheath )	-	3000	3000
Table 1 iii) d) 3)(Sheath- TS variation)	-	2000	2000
Table 1 iii) c) 4)(Shrinkage-Insulation)	-	3500	3500
Table 1 iii) d) 5)(Heat shock-Sheath )	-	1800	1800
10.1(HV (water immersion))	-	4000	4000
10.2(HV (room temperature))	-	1800	1800
10.9(Additional ageing test (OU cables only) -HV test (at 60±3oC))	-	5000	5000

-
-

14137

MSME TESTING CENTRE (WR), MUMBAI

7119404

IS 4250 (1980)

Specification for domestic electric food - Mixers (Liquidizers And Grinders) (First Revision)

Domestic Electric Food Mixers (Liquidizers & Grinders)

16000 View breakup
Type test: Rs. 16,000/- ; Acceptance test Rs. 12,000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1(Marking- IS 302-1)	-	1800	1800
8( Protection Against Electric Shock, IS 302-1)	-	1800	1800
9(Starting, IS 302-1)	-	1800	1800
10(Power Input and Current, IS 302-1)	-	1800	1800
11(Heating, IS 302-1)	-	2500	2500
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1800	1800
15.1(Moisture Resistance, IS 302-1)	-	3000	3000
15.2(Moisture Resistance-Spillage test)	-	3000	3000
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1800	1800
19(Abnormal Operation, IS 302-1)	-	1800	1800
21(Mechanical Strength, IS 302-1)	-	1800	1800
25(Supply Connection and External Flexible Cords, IS 302-1)	-	1800	1800
27(Provision for Earthing, IS 302-1)	-	1800	1800
28(Screws & Connections, IS 302-1)	-	1800	1800
29(Clearances and Distances through Insulation, IS 302-1)	-	1800	1800
30(Resistance to Heat, Fire, Tracking, IS 302-1)	-	3000	3000
34.2(Operational tests- Grinding coffee (for machines which have a dry grinding arrangement))	-	2500	2500
34.3(Whisking egg whites )	-	2500	2500
35(Temperature withstand test for bowl)	-	1500	1500
36(Test for controls )	-	1800	1800

-
Type Test: Rs.14,000/- Acceptance Test: Rs.10,500/-

14138

MSME TESTING CENTRE (WR), MUMBAI

7119404

IS 16102 : Part 1 (2012)

Self - Ballasted led lamps for general lighting services: Part 1 safety requirements

Self ballasted LED Lamps for general lighting service

20000 View breakup
Type test Rs. 20,000/- ; Acceptance test Rs. 15,000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking)	-	1800	1800
6(Interchangeability)	-	1800	1800
7(Protection against accidental contact with live parts)	-	1800	1800
8(Insulation Resistance and Electric Strength)	-	6000	6000
9(MECHANICAL STRENGTH)	-	2500	2500
10(cap temperature)	-	5000	5000
11(Resistance to Heat)	-	1800	1800
12(Resistance to Flame and Ignition)	-	2500	2500
13(Fault conditions)	-	1800	1800
14(Creepage distance and clearances)	-	1800	1800

-
Lamp Cap Type : B22d only

14139

MSME TESTING CENTRE (WR), MUMBAI

7119404

IS 1293 (2019)

Plugs and socket - Outlets of rated Voltage up to and including 250 Volts and rated current up to and including 16 amperes - Specification (Third Revision)

upto & including 250V & rated current upto 16A

22000 View breakup
Type test : Rs.14,000/- for 6/10A; Rs. 16,000/- for 16A; Rs. 22,000/- for 6A/16A combined socket. Acceptance test: Rs.10,500/- for 6/10A; Rs. 16,000/- for 16A; Rs. 15,000/- for 6A/16A combined socket.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Ratings)	-	1800	Type Test:6A/10A:Rs.14000/-, 16A:Rs.16000/-, 6/16AMultiple Socket:Rs.20000/- Acceptance Test:6A/10A:Rs.10500/-, 16A:Rs.12000/-, 6/16AMultiple Socket:Rs.15000/-
7.1.1(Accessories Classification)	-	1800	Type Test:6A/10A:Rs.14000/-, 16A:Rs.16000/-, 6/16AMultiple Socket:Rs.20000/- Acceptance Test:6A/10A:Rs.10500/-, 16A:Rs.12000/-, 6/16AMultiple Socket:Rs.15000/-
7.1.2(Accessories Classification)	-	1800	1800
7.1.3(Accessories Classification)	-	1800	1800
7.1.4(Accessories Classification)	-	1800	1800
7.1.5(Accessories Classification)	-	1800	1800
7.2.1(Socket-Outlets Classification)	-	1800	1800
7.2.2(Socket-Outlets Classification)	-	1800	1800
7.2.3(Socket-Outlets Classification)	-	1800	1800
7.2.4(Socket-Outlets Classification)	-	1800	1800
7.3(Plug Classification)	-	1800	1800
8.1(MARKING)	-	1800	1800
8.8(MARKING)	-	1800	1800
8.9(MARKING)	-	1800	1800
9.1(CHECKING OF DIMENSIONS)	-	1800	1800
9.2(CHECKING OF DIMENSIONS)	-	1800	1800
10.1(PROTECTION AGAINST ELECTRIC SHOCK)	-	1800	1800
10.3(PROTECTION AGAINST ELECTRIC SHOCK)	-	1800	1800
10.4(PROTECTION AGAINST ELECTRIC SHOCK)	-	1800	1800
10.5(PROTECTION AGAINST ELECTRIC SHOCK)	-	1800	1800
10.6(PROTECTION AGAINST ELECTRIC SHOCK)	-	1800	1800
10.7(PROTECTION AGAINST ELECTRIC SHOCK)	-	1800	1800
11.1(PROVISIONS FOR EARTHING)	-	1800	1800
11.2(PROVISIONS FOR EARTHING)	-	1800	1800
11.3(PROVISIONS FOR EARTHING)	-	1800	1800
11.4(PROVISIONS FOR EARTHING)	-	1800	1800
11.5(PROVISIONS FOR EARTHING)	-	1800	1800
11.6(PROVISIONS FOR EARTHING)	-	1800	1800
12.1.1(TERMINALS)	-	2500	2500
12.1.2(TERMINALS)	-	2500	2500
12.2.1(TERMINALS)	-	2500	-
12.2.2(TERMINALS)	-	2500	2500
12.2.3(TERMINALS)	-	2500	2500
12.2.4(TERMINALS)	-	2500	2500
12.2.5(TERMINALS)	-	2500	2500
12.2.6(TERMINALS)	-	2500	2500
12.2.7(TERMINALS)	-	2500	2500
12.2.8(TERMINALS)	-	2500	2500
12.2.9(TERMINALS)	-	2500	2500
12.2.10(TERMINALS)	-	2500	2500
12.2.11(TERMINALS)	-	2500	2500
12.3.1(TERMINALS)	-	2500	2500
12.3.2(TERMINALS)	-	2500	2500
12.3.4(TERMINALS)	-	2500	2500
12.3.5(TERMINALS)	-	2500	2500
12.3.6(TERMINALS)	-	2500	2500
12.3.7(TERMINALS)	-	2500	2500
12.3.8(TERMINALS)	-	2500	2500
12.3.9(TERMINALS)	-	2500	2500
12.3.10(TERMINALS)	-	2500	2500
12.3.11(TERMINALS)	-	2500	2500
12.3.12(TERMINALS)	-	2500	2500
13.1(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	2500	2500
13.2(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	2500	2500
13.3(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	2500	2500
13.4(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	2500	2500
13.5(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	2500	2500
13.6(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	2500	2500
13.7(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	2500	2500
13.8(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	2500	2500
13.9(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	2500	2500
13.11(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	2500	2500
13.12(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	2500	2500
13.13(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	2500	2500
13.14(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	2500	2500
13.15(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	2500	2500
13.16(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	2500	2500
13.17(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	2500	2500
13.18(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	2500	2500
13.19(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	2500	2500
13.21(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	2500	2500
13.22(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	2500	2500
13.23(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	2500	2500
14.1(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	2500	2500
14.26(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	2500	2500
15(INTERLOCKED SOCKET-OUTLETS)	-	2500	2500
16.1(RESISTANCE TO AGEING,)	-	3000	3000
16.2(RESISTANCE TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	3000	3000
16.3(Resistance to Humidity)	-	3000	3000
17.1(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	1800	1800
17.2(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	1800	1800
17.3(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	1800	1800
18(OPERATION OF EARTHING CONTACTS)	-	1800	1800
19(TEMPERATURE RISE)	-	2500	2500
20(BREAKING CAPACITY)	-	2000	2000
21(NORMAL OPERATION)	-	4000	4000
22.1(Verification of the Maximum Withdrawal Force)	-	1800	1800
22.2(Verification of Minimum Withdrawal Force)	-	1800	1800
23.1(FLEXIBLE CABLES AND THEIR CONNECTION)	-	1800	1800
23.3(FLEXIBLE CABLES AND THEIR CONNECTION)	-	1800	1800
24.1(MECHANICAL STRENGTH For all kinds of fixed socket-outlets )	-	1800	1800
24.2(MECHANICAL STRENGTH For portable single socket-outlets: 1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	1800	1800
24.3(MECHANICAL STRENGTH for fixed socket-outlets with a main part intended to be mounted directly on a surface)	-	1800	1800
24.4(MECHANICAL STRENGTH For portable single socket-outlets: 1) with enclosures, covers or bodies of thermoplastic or elastomeric material)	-	1800	1800
24.5(MECHANICAL STRENGTH For portable single socket-outlets: 1) with enclosures, covers or bodies of thermoplastic or elastomeric material)	-	1800	1800
24.6(MECHANICAL STRENGTH For screwed glands of accessories having an IP code higher than IP20)	-	1800	1800
25.1(RESISTANCE TO HEAT Accessories and surface mounting boxes)	-	2500	2500
25.2(RESISTANCE TO HEAT Parts of insulating material necessary to retain current-carrying parts of the earthing circuit in position, as well as parts of the front surface zone of thermoplastic material)	-	2500	2500
25.3(RESISTANCE TO HEAT Parts of insulating material not necessary to retain current-carrying parts and parts of the earthing circuit in position, even though they are in contact with them)	-	2500	2500
25.4(RESISTANCE TO HEAT )	-	2500	2500
25.1(RESISTANCE TO HEAT Accessories and surface mounting boxes)	-	2500	2500
26.1(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	1800	1800
26.2(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	1800	1800
27.1(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	1800	1800
27.2(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	1800	1800
28.1.1(Resistance to Abnormal Heat and to Fire Glow-Wire Test)	-	2500	2500
28.1.2(Resistance to Abnormal Heat and to Fire for plugs with pins provided with insulating sleeves)	-	2500	2500
28.2(Resistance to Tracking For accessories other than IP code higher than IPX0 parts of insulating material retaining live parts in position)	-	2500	2500
29(RESISTANCE TO RUSTING)	-	1800	1800
30.1(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Pressure Test at High Temperature)	-	1800	1800
30.2(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Static Damp Heat Test)	-	1800	1800
30.3(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Tests at Low Temperature)	-	1800	1800
30.4(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Impact Test at Low Temperature)	-	1800	1800

-
-

14140

MSME TESTING CENTRE (WR), MUMBAI

7119404

IS 14927 : Part 2 (2001)

Cable Trunking and Ducting Systems for Electrical Installations : Part 2 Cable Trunking and Ducting Systems Intended for Mounting on Walls or Ceiling

12000 View breakup
Rs 12,000 For complete IS

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1(Marking (as per Cl 7.1 of IS:14927(Pt-I ):2001))	-	1000	1000
7.2(Marking (as per Cl 7.2 of IS:14927(Pt-I ):2001))	-	1000	1000
8.1( Dimensions (As per cl.8.1 of IS 14927(Pt-1) : 2001))	-	1000	1000
8.2(Dimensions (As per cl.8.2 of IS 14927(Pt-1) : 2001)	-	1000	1000
8.3, table 2( Dimensions (As per cl.8.3 and Table-2 of IS 14927(Pt-1) : 2001))	-	1000	1000
9.1(Construction)	-	2000	2000
9.2(Construction ( As per Cl. 9.2 of IS 14927(Pt-1):2001))	-	2000	2000
9.3(Construction ( As per Cl. 9.3 of IS 14927(Pt-1):2001))	-	2000	2000
9.4.1(Construction [Access to Live Parts (As per Cl. 9.4.1 of IS 14927(Pt-1):2001)])	-	2000	2000
9.5(Construction (As per Cl. 9.5 of IS 14927(Pt-1):2001))	-	2000	2000
9.6.2(Construction [Membranes (As per Cl.9.6.2 of IS: 14927 (Pt-1):2001)])	-	2000	2000
9.6.4(Construction [Membranes (As per Cl.9.6.4 of IS: 14927 (Pt-1):2001)])	-	2000	2000
9.7.2, table 4(Construction [Glands (As per Cl.9.7.2 and Table-4 of IS: 14927 (Pt-1):2001)] )	-	2000	2000
10.2(Cable supporting test for Surface mounting (As per Cl.10.2))	-	2000	2000
10.3(Impact Test [ Cl.10.3 ])	-	2000	2000
10.4(Linear Deflection Test [ Cl.10.4 ])	-	2000	2000
11.1.1(Resistance to flame propagation (As per Cl. 11.1.1))	-	1000	1000
12(Electrical Insulating Strength and Insulation Resistance Test. [ Cl.12.3 ])	-	3000	3000
10.2(Cable supporting test for Surface mounting (As per Cl.10.2))	-	2000	2000

-
-

14141

MSME TESTING CENTRE (WR), MUMBAI

7119404

IS 9537 : Part 3 (1983)

Specification for conduits for electrical installations: Part 3 rigid plain conduits of insulating meterials

14000 View breakup
Rs 14,000 For complete IS

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1(Construction as per clause 8 of IS: 9537 (Part 1)-1980)	-	1000	Rs.14,000/- for BIS Samples Rs.4950/- for upto and including 25mm, Rs.4,275/- for above 25mm
6.1(Marking)	-	1000	Rs.14,000/- for BIS Samples Rs.4950/- for upto and including 25mm, Rs.4,275/- for above 25mm
6.2(Durability of Marking as per 6.4 of IS: 9537 (Part 1)-1980)	-	1000	1000
7.1.1(Maximum and minimum outside diameter of socket)	-	1000	1000
7.1.1 Table-2(Length of Socket end)	-	1000	1000
7.1.2(Maximum and minimum outside diameter of conduit)	-	1000	1000
7.2(Minimum inside diameter of conduit)	-	1000	1000
7.3(Length of conduit)	-	1000	1000
7.4(Unifomity of The wall Thickness)	-	1000	1000
9.2(Bending Test i) At Room Temp ii) At Low Temp (-5 ±2°C))	-	2000	2000
9.3(Compression Test as per caluse 9.3 of IS: 9537 (Part 1)-1980)	-	2000	2000
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	2000	2000
9.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	2000	2000
10(Resistance to Heat -Ball presure test)	-	2000	2000
11(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	1000	1000
12(Electrical Characteristics-Test for electric strength as per clause 12.1.1 of IS: 9537 (Part 1)-1980)	-	3000	3000
12(Electrical Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-	3000	3000

-
-

14142

MSME TESTING CENTRE (WR), MUMBAI

7119404

IS 3419 (1988)

Specification for fittings for rigid non - Metallic (Second Revision)

10000 View breakup
Rs 10,000 For complete IS

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8 & 5(Visual Examination -IS:3419)	-	1000	1000
6.2 & 9.1- Table-1, ii(Inside Diameter of Collar for Slip type cuplers -IS:3419)	-	2000	2000
6.2 & 9.1- Table-1, iii(Inside Diameter of Ridge for Slip type cuplers -IS:3419)	-	2000	2000
6.2 & 9.1- Table-1, iv(Minimum overall length for Slip type cuplers -IS:3419)	-	2000	2000
6.2 & 9.1- Table-1, v(Minimum wall thickness for Slip type cuplers -IS:3419)	-	2000	2000
6.2 & 9.1- Table-2, ii(Inside Diameter of Collar for Socketed type cuplers -IS:3419)	-	2000	2000
6.2 & 9.1- Table-2, iii(Inside Diameter of Ridge for Socketed type cuplers -IS:3419)	-	2000	2000
6.2 & 9.1- Table-2, iv(Minimum overall length (a) for Socketed type cuplers -IS:3419)	-	2000	2000
6.2 & 9.1- Table-2, v(Minimum overall length (l) for Socketed type cuplers -IS:3419)	-	2000	2000
6.2 & 9.1- Table-2, vi(Minimum wall thickness for Socketed type cuplers -IS:3419)	-	2000	2000
6.2 & 9.1- Table-3, ii(Inside Diameter of Collar(d6) for Clamp type cuplers -IS:3419)	-	2000	2000
6.2 & 9.1- Table-3, iv(Inside Diameter of Ridge for Clamp type cuplers -IS:3419)	-	2000	2000
6.2 & 9.1- Table-3, iv(Minimum length for Clamp type cuplers -IS:3419)	-	2000	2000
6.2 & 9.1- Table-4, v(Length (l1) of Normal Type Bend -IS:3419)	-	2000	2000
6.2 & 9.1- Table-3, vi(Minimum wall thickness for Clamp type cuplers -IS:3419)	-	2000	2000
6.2 & 9.1- Table-4, ii(Outside Dameter of Normal type bend -IS:3419)	-	2000	2000
6.2 & 9.1- Table-4, iii(Minimum Inside Diameter of Normal Type Bend -IS:3419)	-	2000	2000
6.2 & 9.1- Table-4, iv(Radious(R) of Normal Type Bend -IS:3419)	-	2000	2000
6.2 & 9.1- Table-5, ii(Outside Dameter of Slip type cupling bend -IS:3419)	-	2000	2000
6.2 & 9.1- Table-5, iii(Minimum Inside Diameter of Slip type cupling bend -IS:3419)	-	2000	2000
6.2 & 9.1- Table-5, iv(Inside Diameter of collar for Slip type cupling bend -IS:3419)	-	2000	2000
6.2 & 9.1- Table-5, v(R- for Slip type cupling bend -IS:3419)	-	2000	2000
6.2 & 9.1- Table-5, vi(Y- for Slip type cupling bend -IS:3419)	-	2000	2000
6.2 & 9.1- Table-5, vii(l2- for Slip type cupling bend -IS:3419)	-	2000	2000
6.2 & 9.1- Table-6, ii(Inside Diameter of collar for Normal type Elbows -IS:3419)	-	2000	2000
6.2 & 9.1- Table-6, iii(Length (l) of Normal Type Elbows -IS:3419)	-	2000	2000
6.2 & 9.1- Table-6, iv(Radious(r) of Normal Type Elbows -IS:3419)	-	2000	2000
6.2 & 9.1- Table-6, v(Minimum wall thicknes of Elbows -IS:3419)	-	2000	2000
6.2 & 9.1- Table-7, ii(Inside Diameter of Collear for Normal type Tees -IS:3419)	-	2000	2000
6.2 & 9.1- Table-7, iii(Length (l) of Normal type Tees -IS:3419)	-	2000	2000
6.2 & 9.1- Table-7, iv(Radious(r) of Normal type Tees -IS:3419)	-	2000	2000
6.2 & 9.1- Table-7, v( Minimum wall thicknes of Normal type Tees -IS:3419)	-	2000	2000
6.2 & 9.1- Table-8, ii(Inside Diameter of Collear for socketed type Tees - IS:3419)	-	2000	2000
6.2 & 9.1- Table-8, iii(a - of socketed type Tees -IS:3419)	-	2000	2000
6.2 & 9.1- Table-8, iv(l - of socketed type Tees -IS:3419)	-	2000	2000
6.2 & 9.1- Table-8, v(Minimum wall thicknes of socketed type Tees -IS:3419)	-	2000	2000
6.2 & 9.1- Table-9, ii(B - of spout Type Circular Boxes -IS:3419)	-	2000	2000
6.2 & 9.1- Table-9, iii(C - of spout Type Circular Boxes -IS:3419)	-	2000	2000
6.2 & 9.1- Table-9, iv(D - of spout Type Circular Boxes -IS:3419)	-	2000	2000
6.2 & 9.1- Table-9, v(E - of spout Type Circular Boxes -IS:3419)	-	2000	2000
6.2 & 9.1- Table-9, vi(F(Max) - of spout Type Circular Boxes -IS:3419)	-	2000	2000
6.2 & 9.1- Table-9, vii(F(Min) - of spout Type Circular Boxes -IS:3419)	-	2000	2000
6.2 & 9.1- Table-9, viii(G - of spout Type Circular Boxes -IS:3419)	-	2000	2000
6.2 & 9.1- Table-9, ix(t - of spout Type Circular Boxes -IS:3419)	-	2000	2000
10(Resistance to Heat -IS:3419)	-	2000	2000
11(Resistance to Burning - IS 3419)	-	2000	2000
12(Moisture Absorption - IS 3419)	-	2000	2000
13.2 &13.3(Resistance to chemival action in Acid solution - IS 3419)	-	2000	2000
13.2 &13.3(Resistance to chemival action in Alkaline solution - IS 3419)	-	2000	2000
14.1(Copper Test - IS 3419)	-	2000	2000
15, 15.3(Resistance to Oil - IS 3419)	-	2000	2000
15,15.4(Resistance to Oil - IS 3419)	-	2000	2000
16- Appendix-A(Resistance to Impact -IS 3419)	-	2000	2000
17.2(Electric Strength - IS 3419)	-	2000	2000
17.3(Insulation Resistance - IS 3419)	-	2000	2000

-
-

14143

BIS, Southern Regional Laboratory (SRL)

None

IS 11722 (1986)

Specification for thin walled flexible quick coupling pipes

4800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Pipe Manufacturing Process )	-
5,5.1 (Workmsnship &Finish)	-
6 &7 ; Table 1 (Dimension & Tolerance)	-
8 (Length)	-
12 (Straightness)	-
13.1 (Flattening Test,IS 2328)	-
13.2 (Tensile Test ,; IS 1608(P1))	-

-
" 2 nos.+coupler Excluding excl hydraulic test,chemical tests

14144

BIS, Southern Regional Laboratory (SRL)

None

IS 4224 (1972)

Specification for steel wire for staples, pins and clips (First Revision)

525 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 (Freedom from defects , IS 4224)	-
5 (Sizes and Tolerances - IS 4224)	-
6 (Finish)	-
7.1 (Tensile Test - IS 1608(Pt -1))	-

-
" 5 m + 100g drill. Excluding chemical test

14145

BIS, Southern Regional Laboratory (SRL)

None

IS 903 (1993)

Specification for Fire Hose Delivery Couplings, Branch Pipe, Nozzles And Nozzle Spanner - Specificaion

Rs 3600/ View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3 (Finish and workmanship)	-
4 (Marking)	-
5 (Delivery hose coupling)	-
5.3 (Size and Dimension )	-
7.3 (Hydraulic test requirement)	-
6 (Branch pipe)	-
6.3 (Hydraulic test requirement)	-
7 (Nozzle)	-
7.3 (Hydraulic test requirement)	-
8.2 (Shape & Dimensions of Spanner)	-
8.4 (Deflection test of Spanner)	-

-
" 1 pcs Excluding Except Hydraulic Test Requirement, Deflection Test Requirement,chemical tests

14146

BIS, Southern Regional Laboratory (SRL)

None

IS 13997 (2014)

Drums, large open top - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5, Table 1 (Dimensions-D2)	-
5, Table 1 (Dimensions-D3)	-
5, Table 1 (Dimensions-D4)	-
5, Table 1 (Dimensions-H1)	-
5, Table 1 (Dimensions-H5)	-
5, Table 1 (Dimensions-h2)	-
5, Table 1 (Dimensions-h3)	-
5, Table 1 (Dimensions-h4)	-
5, Table 1 (Dimensions-p1)	-
6.2 (The nominal thickness of steel sheets for body and ends )	-
7.1 ( CONSTRUCTION)	-
7.2 ( CONSTRUCTION)	-
7.3 ( CONSTRUCTION- Double Seam/Spiral Seam/Triple Seam Construction for Grade A Drums)	-
7.4 ( CONSTRUCTION-Spiral Seam/Triple Seam Construction for Grade B Drums)	-
7.5 ( CONSTRUCTION)	-
7.6 ( CONSTRUCTION)	-
7.7 ( CONSTRUCTION)	-
7.8 ( CONSTRUCTION)	-
7.9 (Closures)	-
7.10(a) (Closures)	-
7.10(b) (Closures)	-
7.10(c) (Closures)	-
7.10(d) (Closures)	-
7.11 ( Locking Ring)	-
8.1 (FINISH )	-
8.2 (FINISH )	-
9 (leakage test)	-

-
-

14147

BIS, Southern Regional Laboratory (SRL)

None

IS 2653 (2004)

Safety matches in boxes - Specification (Third Revision)

Rs 2570.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1.2.1 (Matchboxes)	-
5.1.2.2 (Matchboxes)	-
5.1.3 (Envelopment)	-
5.1.4 (Ease of Opening)	-
5.1.5 (Retention of Contents)	-
5.1.6.1 (Defective Match Boxes)	-
5.1.6.2 (Defective Match Boxes)	-
5.2.1.1 (Match Splints)	-
5.2.1.2 (Match Splints)	-
5.2.1.2 (Minimum thickness)	-
5.2.1.2 (Average thickness)	-
5.2.2 (Unserviceable Sticks)	-
5.3 (Match Boxes)	-
6.1.1 (Striking Performance - General)	-
6.1.2 (Safety Matches)	-
6.2 (Ignition Below 170 ˚C)	-
6.3 (Ignition Under Impact)	-
6.4.1 (Durability of the Striking Surface)	-
6.4.2 (Ignition of the Striking Surface)	-
6.4.3 (Loss of Burning Fragments)	-
6.5 (Damp Proofness for Match Boxes)	-

-
" 2 dozen

14148

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING AND TECHNOLOGY (CIPET):CSTS-BHOPAL

8100534

IS 4984 (2016)

Polyethylene pipes for water supply - Specification (Fifth Revision)

42325 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.10(Slow Crack Growth Rate)	-	5500	NIl
8.9 table-6(Elongation at Break)	-	1100	Nil
8.8(Tensile Strength for Butt-fusion)	-	1100	Nil
8.7(Density)	-	500	Nil
8.5 (Oxidation Induction Time)	-	2200	Nil
8.4( Melt Flow Rate)	-	1100	Nil
8.2(Longitudinal Reversion Test)	-	1100	Nil
8.1.2 table -5(Internal Pressure Creep Rupture Test of Pipe Joints)	-	1600	Nil
8,/8.1/8.1.1 table-5(PERFORMANCE REQUIREMENTS / Hydraulic Characteristics/ Internal Pressure Creep Rupture Test of Pipe)	-	22000	Nil
7.4.1.2(Ovality)	-	250	Nil
Cl-7.4(Mean Outside Diameter (For upto 50 mm take 8 reading, above 50mm take 6 reading & average will be reported))	-	250	Nil
7.2(Length)	-	250	Nil
6.2.1(6.1.1 Identification Stripes)	-	250	Nil
6.2(Colour)	-	250	Nil
6.1.4(PIPE DESCRIPTION)	-	250	Nil
6.1.3 (PIPE DESCRIPTION)	-	0	Nil
6, 6.1.2(PIPE DESCRIPTION)	-	0	Nil
6, 6.1.1(PIPE DESCRIPTION)	-	0	Nil
6, 6.1(PIPE DESCRIPTION)	-	0	Nil
8.6(Overall migration)	-	2200	Nil
8.3(Carbon black)	-	925	Nil
5.3 (a)(Carbon Black Master Batch)	-	925	Nil
5.2(Polyethylene Resin)	-	2000	Nil

31 Dec, 2026

-
-

14149

URS PRODUCTS AND TESTING PVT LTD (F3), NOIDA

8136826

IS 16270 (2014)

Secondary cells and batteries for solar photovoltaic application - General requirements and methods of test

331000 View breakup
Rs.3,31,000/- [10% Discount to BIS]

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.4(Marking)	-	9999.99	10% discount to BIS
4(Condition of use)	-	40000	10% discount to BIS
5.1(Mechanical Endurance)	-	20000	10% discount to BIS
5.2(Charge efficiency)	-	30000	10% discount to BIS
5.3(Deep discharge protection)	-	10000	10% discount to BIS
5.5(Dafety)	-	10000	10% discount to BIS
5.6(Documentation)	-	10000	10% discount to BIS
6(Finctional Characteristics)	-	4999.98	10% discount to BIS
7(General test conditions)	-	5000	10% discount to BIS
8.1(Capacity test)	-	15000	10% discount to BIS
8.2(Endurance test)	-	20000	10% discount to BIS
8.3(Charge retention test)	-	15000	10% discount to BIS
8.4(Cycle endurance in Photovoltaic application)	-	20000	10% discount to BIS
8.5(Sulphation Test)	-	40000	10% discount to BIS
8.6(Water loss test)	-	40000	10% discount to BIS
8.7(Non spillability)	-	30000	10% discount to BIS

31 Dec, 2026

-
Included w.e.f. 24-07-2020.Except Flooded Lead Acid Batteries.

14150

URS PRODUCTS AND TESTING PVT LTD (F3), NOIDA

8136826

IS 16221 : Part 2 (2015)

Safety of power converters for use in photovoltaic power systems: Part 2 particular requirements for inverters

190500 View breakup
Rs.1,90,500/- [10% Discount to BIS]

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
14(Components)	-	10000	Test is in Inclusion
4(General Test Requireements)	-	40000	10% Discount to BIS
5(Marking and documentation)	-	5000	10% Discount to BIS
6(Environmental requirements and conditions)	-	50000	10% Discount to BIS
7(Protection against electric shock and energy hazards)	-	30000	10% Discount to BIS
9(Protection against Fire Hazards)	-	10000	10% Discount to BIS
11(Protection against Liquid Hazards)	-	10000	10% Discount to BIS
13(Physical Requirements)	-	10000	10% Discount to BIS
8(Protection against Mechanical Hazards)	-	10000	10% Discount to BIS
10(Protection against Sonic Pressure Hazards)	-	10000	10% Discount to BIS
12(Protection against Chemical Hazards)	-	10000	10% Discount to BIS

31 Dec, 2026

-
Excluding: Cl.10.2-Protection against sonic Pressure hazards, Cl.13.6.4-UV resistance, Cl.14 –Component. Included w.e.f. 24-07-2020.

14151

URS PRODUCTS AND TESTING PVT LTD (F3), NOIDA

8136826

IS 16242 : Part 1 (2014)

Uninterruptible power systems (UPS): Part 1 general and safety requirements for UPS

75000 View breakup
Rs.75,000/- [15% Discount to BIS]

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.5(Components)	-	500	Rs.45,000/- for UPS/Invertersof rating up to 5 kVA 15% discount to BIS
4.6(Power interface)	-	10000	Rs.45,000/- for UPS/Invertersof rating up to 5 kVA 15% discount to BIS
4.7(Marking & instructions)	-	1000	Rs.45,000/- for UPS/Invertersof rating up to 5 kVA 15% discount to BIS
5.1(Protection against shock and energy hazards)	-	7000	Rs.45,000/- for UPS/Invertersof rating up to 5 kVA 15% discount to BIS
5.2(Requirement of auxiliary circuits)	-	1000	Rs.45,000/- for UPS/Invertersof rating up to 5 kVA 15% discount to BIS
5.3(Protective earthing and bonding)	-	8000	Rs.45,000/- for UPS/Invertersof rating up to 5 kVA 15% discount to BIS
5.4(AC and DC power isolation)	-	7500	Rs.45,000/- for UPS/Invertersof rating up to 5 kVA 15% discount to BIS
5.5(Over current and earth fault condition)	-	3000	Rs.45,000/- for UPS/Invertersof rating up to 5 kVA 15% discount to BIS
5.6(Safety interlocks)	-	1000	Rs.45,000/- for UPS/Invertersof rating up to 5 kVA 15% discount to BIS
5.7(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	4000	Rs.45,000/- for UPS/Invertersof rating up to 5 kVA 15% discount to BIS
6.1(Wiring, connections and supply)	-	2000	Rs.45,000/- for UPS/Invertersof rating up to 5 kVA 15% discount to BIS
6.2(Connection to power)	-	1500	Rs.45,000/- for UPS/Invertersof rating up to 5 kVA 15% discount to BIS
6.3(Wiring terminals for external power conductors)	-	2000	Rs.45,000/- for UPS/Invertersof rating up to 5 kVA 15% discount to BIS
7.1(Enclosure)	-	2000	Rs.45,000/- for UPS/Inverters of rating up to 5 kVA 15% discount to BIS
7.2(STABILITY)	-	2000	Rs.45,000/- for UPS/Inverters of rating up to 5 kVA 15% discount to BIS
7.3(MECHANICAL STRENGTH)	-	4000	Rs.45,000/- for UPS/Inverters of rating up to 5 kVA 15% discount to BIS
7.4(Construction details)	-	500	Rs.45,000/- for UPS/Inverters of rating up to 5 kVA 15% discount to BIS
7.5(Resistance to fire)	-	2000	Rs.45,000/- for UPS/Inverters of rating up to 5 kVA 15% discount to BIS
7.6(Battery location)	-	1000	Rs.45,000/- for UPS/Inverters of rating up to 5 kVA 15% discount to BIS
7.7(Temperature rise)	-	3000	Rs.45,000/- for UPS/Inverters of rating up to 5 kVA 15% discount to BIS
8.1(General procision for earth leakage)	-	3000	Rs.45,000/- for UPS/Inverters of rating up to 5 kVA 15% discount to BIS
8.2(Electric Strength)	-	4000	Rs.45,000/- for UPS/Inverters of rating up to 5 kVA 15% discount to BIS
8.3(Abnormal operating and fault conditions)	-	3000	Rs.45,000/- for UPS/Inverters of rating up to 5 kVA 15% discount to BIS
9.0(Connection to telecommunication networks)	-	2000	Rs.45,000/- for UPS/Inverters of rating up to 5 kVA 15% discount to BIS

31 Dec, 2026

-
Excluding: Capacitor Bridging Insulation (Cl.4.5 / RD 1.5.6), Resistor Bridging Insulation (Cl.4.5 / RD 1.5.7), Surge Suppressor (Cl.4.5 / RD 1.5.7), Ventilation of Battery Compartment (Cl. Annex-M). Non-linear loads (Cl.3.3.3, Annex-L.5). Additional Products/ Test Facility included w.e.f. 18.07.2018. For rating up to 300V, 1Φ, AC

14152

URS PRODUCTS AND TESTING PVT LTD (F3), NOIDA

8136826

IS 16046 : Part 2 (2018)

Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes ” Safety Requirements for Portable Sealed Secondary Cells and for Batteries Made from Them for Use in Portable Applications Part 2 Lithium Systems ( Second Revision )

60000 View breakup
Rs.60000/- [15% discount to BIS]

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Parameter Measurement Tolerances)	-	100	-
5(General Safety Considerations)	-	100	-
5.1(General)	-	500	-
5.2(Insulation and Wiring)	-	1000	-
5.3(Venting)	-	499.99	-
5.4(Temperature, Voltage and Current Management)	-	500	-
5.5(Terminal Contacts)	-	500	-
5.6(Assembly of Cells into batteries)	-	500	-
5.7(Quality Plan)	-	100	-
5.8(Battery Safety Components)	-	100	-
6(Type Test and Sample Size)	-	500	-
7(Specific requirements and tests)	-	8000	-
7.1(Charging procedure for test purposes)	-	10000	-
7.2(Intended Use)	-	11000	-
7.3(Reasonably foreseeable misuse)	-	20000	-
8(Information for safety)	-	1000	-
8.1(General)	-	1000	-
8.2(Small Cell and battery safety information)	-	500	-
9(Marking)	-	1000	-
9.1(Cell Marking)	-	500	-
9.2(Battery Marking)	-	500	-
9.3(Caution for ingestion of small cells and batteries)	-	500	-
9.4(Other information)	-	1000	-
10(Packaging)	-	600	-

31 Dec, 2026

-
Revised version included w.e.f. 28.01.2019. Exclusion : Clause 7.3.1 of IS 16047: Part 3

14153

URS PRODUCTS AND TESTING PVT LTD (F3), NOIDA

8136826

IS 16046 : Part 1 (2018)

60000 View breakup
Rs.60000/- [15% discount to BIS]

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Parameter Measurement Tolerances)	-	500	15 % Discount to BIS
5(General Safety Considerations)	-	500	15 % Discount to BIS
5.1(General)	-	100	-
5.2(Insulation and Wiring)	-	1000	-
5.3(Venting)	-	100	-
5.4(Temperature, Voltage and Current Management)	-	500	-
5.5(Terminal Contacts)	-	500	-
5.6(Assembly of Cells into batteries)	-	500	-
5.7(Quality Plan)	-	100	-
6(Tyoe Test amd Sample Size)	-	600	-
7(Specific requirements and tests)	-	5000	-
7.1(Charging procedure for test purposes)	-	8000	-
7.2(Intended Use)	-	14000	-
7.3(Reasonably foreseeable misuse)	-	20000	-
8(Information for safety)	-	1000	-
8.1(General)	-	1000	-
8.2(Small Cell and battery safety information)	-	500	-
9(Marking)	-	1000	-
9.1(Cell Marking)	-	500	-
9.2(Battery Marking)	-	500	-
9.3(Caution for ingestion of small cells and batteries)	-	500	-
9.4(Other information)	-	1000	-
10(Packaging)	-	600	-

31 Dec, 2026

-
Revised version included w.e.f. 28.01.2019.

14154

URS PRODUCTS AND TESTING PVT LTD (F3), NOIDA

8136826

IS 8978 (1992)

Specification for electric instantaneous water heaters (Second Revision)

18000 View breakup
Rs.18000/- [15% discount to BIS]

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.10 of IS 8978 : 1992(Finish)	-	1000	15% discount to BIS
Cl.11 of IS 8978 : 1992(Operation of flow switch)	-	10000	15% discount to BIS
Cl.12 of IS 8978 : 1992(Endurance)	-	7000	15% discount to BIS
Cl.7.1 of IS 302-1:2008(Marking : Rated Voltage)	-	30	15% discount to BIS
Cl.7.1 of IS 302-1:2008(Marking : Nature of supply)	-	30	15% discount to BIS
Cl.7.1 of IS 302-1:2008(Marking : Rated power input)	-	30	15% discount to BIS
Cl.7.1 of IS 302-1:2008(Marking : Manufacture identification)	-	30	15% discount to BIS
Cl.7.1 of IS 302-1:2008(Marking : Molel or type)	-	30	15% discount to BIS
Cl.7.1 of IS 302-1:2008(Marking : Symbol for class II)	-	30	15% discount to BIS
Cl.7.1 of IS 302-1:2008(Marking : IP number )	-	30	15% discount to BIS
Cl.7.1 of IS 302-1:2008(Marking : Country of manufacture)	-	30	15% discount to BIS
Cl.7.1 of IS 302-2-35:2017(Marking : rated pressure)	-	30	15% discount to BIS
Cl.7.6 of IS 302-1:2008(Marking : Symbols)	-	30	15% discount to BIS
Cl.7.8 of IS 302-1:2008(Marking : Terminal for connection )	-	30	15% discount to BIS
Cl.7.10 & 7.11 of IS 302-1:2008(Marking : Indication for direction of control)	-	30	15% discount to BIS
Cl.7.13 of IS 302-1:2008(Marking : Language)	-	30	15% discount to BIS
Cl.7.14 of IS 302-1:2008(Marking ; Legibility and durability)	-	30	15% discount to BIS
Cl.7.15 of IS 302-1:2008(Marking : Position of marking)	-	30	15% discount to BIS
Cl.7.101 of IS 302-2-35:2017(Marking : Woter inlet and outlet idetification)	-	30	15% discount to BIS
Cl.7.102 of IS 302-2-35:2017(Marking : Standard mark)	-	30	15% discount to BIS
Cl.8 of IS 302-2-35:2017(Protection Against Access To Live Parts)	-	2000	15% discount to BIS
Cl.10 of IS 302-2- 35:2017(Power Input & Current )	-	2000	15% discount to BIS
Cl.11 of 302-2-35:2017(Heating : Temperature rise of test corner)	-	667	15% discount to BIS
Cl.11 of 302-2-35:2017(Heating : Insulation of supply cord)	-	667	15% discount to BIS
Cl.11 of 302-2-35:2017(Heating : room temperature)	-	667	15% discount to BIS
Cl.13 of IS 302-2-35:2017(Leakage Current & 3 Strength at Operating Temperature )	-	1000	15% discount to BIS
Cl.13 of IS 302-2-35:2017(Leakage Current & 3 Strength at Operating Temperature : High voltage )	-	1000	15% discount to BIS
Cl.14 of IS 302-2-35:2017(Transient Over Voltages )	-	4000	15% discount to BIS
Cl.15 of IS 302-2-35:2017(Moisture Resistance )	-	8000	15% discount to BIS
Cl.16 of IS 302-2-35:2017(Leakage Current and Electric Strength (After Humidity))	-	2000	15% discount to BIS
Cl.19 of IS 302-2-35:2017(Abnormal Operation : Emission of flames, molten metal ,or poisonous or ignitable gas)	-	400	15% discount to BIS
Cl.19 of IS 302-2-35:2017(Abnormal Operation : Temperature rise of test corner)	-	400	15% discount to BIS
Cl.19 of IS 302-2-35:2017(Abnormal Operation : Temperature rise of insulation of supply cord)	-	400	15% discount to BIS
Cl.19 of IS 302-2-35:2017(Abnormal Operation : High voltage)	-	400	15% discount to BIS
Cl.19 of IS 302-2-35:2017(Abnormal Operation : effect on container)	-	400	15% discount to BIS
Cl.20 of IS 302-2-35:2017(Stability & Mechanical Hazards )	-	2000	15% discount to BIS
Cl.21.1 of IS 302-1:2008(Mechanical strength : Rough handling in normal use)	-	1000	15% discount to BIS
Cl. 21.2 of IS 302-1:2008(Mechanical strength : prevent penetration by sharp implements. )	-	1000	15% discount to BIS
Cl.22.1 of IS 302-1:2008(Construction : IP test )	-	84	15% discount to BIS
Cl.22.2 of IS 302-1:2008(Construction : connection to supply mains )	-	84	15% discount to BIS
Cl.22.6 of IS 302-1:2008(Construction : effect of water on 3 insulation )	-	84	15% discount to BIS
Cl.22.6 of IS 302-2-35:2017(Construction : size of drain hole )	-	84	15% discount to BIS
Cl.22.7 of IS 302-1:2008(Construction : safeguards against the risk of excessive pressure. )	-	84	15% discount to BIS
Cl.22.11 of IS 302-1:2008(Construction : Fixing of non detachable parts )	-	84	15% discount to BIS
Cl.22.12 of IS 302-1:2008(Construction : Fixing of Handle, knob, grips, levers and similar parts )	-	84	15% discount to BIS
Cl.22.14 of IS 302-1:2008(Construction : Ragged or sharp edges )	-	8415	-
Cl.22.17 of IS 302-1:2008(Construction : Spacers )	-	84	15% discount to BIS
Cl.22.18 of IS 302-1:2008(Construction : Resistance to corrosion )	-	84	15% discount to BIS
Cl 22.26 ,Cl.22.28, Cl 22.29, Cl 22.30 , Cl 22.31, Cl 22.32 of IS 302-1:2008(Construction : Supplymentry/ double / reinforced insulation for Class II/ Class III appliance )	-	84	15% discount to BIS
Cl.22.33 of IS 302-1:2008(Construction : Direct contact of liquids )	-	84	15% discount to BIS
Cl.22.34, Cl 22.35 of IS 302-1:2008(Construction : Shaft of operating Knobs )	-	84	15% discount to BIS
Cl.22.44 of IS 302-1:2008(Construction : Shape and decoration )	-	84	15% discount to BIS
Cl.22.47 of IS 302-2-35:2017(Construction : Water pressure test )	-	84	15% discount to BIS
Cl.22.101 of IS 302-2-35:2017(Construction : Rated pressure of closed water heater )	-	84	15% discount to BIS
Cl.22.102 of IS 302-2-35:2017(Construction : excessive temperature of outlet )	-	84	15% discount to BIS
Cl.22.103 of IS 302-2-35:2017(Construction : Pressure relief device operation for closed water heater )	-	84	15% discount to BIS
Cl.22.104 of IS 302-2-35:2017(Construction : Pressure in open outlet water heaters )	-	84	15% discount to BIS
Cl.22.106 of IS 302-2-35:2017(Construction : Operation of thermal cut out for closed water heater )	-	84	15% discount to BIS
Cl.22.107 of IS 302-2-35:2017(Construction : Temperature of outlet )	-	84	15% discount to BIS
Cl.22.108 of IS 302-2-35:2017(Construction : Temperature of outlet water intended to supply for showring )	-	84	15% discount to BIS
Cl.22.109 of IS 302-2-35:2017(Construction : Operation of presure switch of open outlet water heater )	-	84	15% discount to BIS
Cl.22.110 of IS 302-2-35:2017(Construction : Provision for fixing to wall )	-	84	15% discount to BIS
Cl.23 of IS 302-2-35:2017(Internal Wiring)	-	1000	15% discount to BIS
Cl.23 of IS 302-2-35:2017(Internal Wiring ; Colour of earthing conductor)	-	1000	15% discount to BIS
Cl.24 of IS 302-2-35:2017(Component )	-	2000	15% discount to BIS
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	223	15% discount to BIS
Cl.25.1 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : connection to the supply mains)	-	223	15% discount to BIS
Cl.25.5 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Type of attachment )	-	223	15% discount to BIS
Cl.25.8 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Resistance of supply cord )	-	223	15% discount to BIS
Cl.25.10 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Colour of Earthing conductor )	-	223	15% discount to BIS
Cl.25.12 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Moulding of supply cord )	-	223	15% discount to BIS
Cl.25.15 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Cord grip test )	-	223	15% discount to BIS
Cl.25.15 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Cord grip test - displacement )	-	223	15% discount to BIS
Cl.25.18 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	223	15% discount to BI
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	2000	15% discount to BI
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	500	15% discount to BIS
Cl.27.5 of IS 302-2-35:2017(Provision for Earthing : ECR )	-	500	15% discount to BIS
Cl.28 of IS 302-2-35:2017(Screws and Connections )	-	1000	15% discount to BIS
Cl.29.1 of IS 302-2-35:2017(Clearances, Creepage Distances and Solid Insulation : Clearance distance )	-	1250	15% discount to BIS
Cl.29.2 of IS 302-2-35:2017(Clearances, Creepage Distances and Solid Insulation : Creepage distance )	-	1250	15% discount to BIS
Cl.30.1 of IS 302-1:2008(Resistance to Heat and Fire)	-	1500	15% discount to BIS
Cl.30.2 of IS 302-1:2008(Resistance to Heat and Fire)	-	1500	15% discount to BIS
Cl.31 of IS 302-2-35: 2017(Resistance to Rusting )	-	1000	15% discount to BIS

31 Dec, 2026

-
-

14155

URS PRODUCTS AND TESTING PVT LTD (F3), NOIDA

8136826

IS 4250 (1980)

Specification for domestic electric food - Mixers (Liquidizers And Grinders) (First Revision)

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification- IS 302-1 )	-	100	15% discount to BIS
7.1(Marking- IS 302-1)	-	100	15% discount to BIS
7.2(Marking)	-	100	15% discount to BIS
7.4(Marking)	-	100	15% discount to BIS
7.5(Marking)	-	100	15% discount to BIS
7.6(Marking)	-	100	15% discount to BIS
8( Protection Against Electric Shock, IS 302-1)	-	1000	15% discount to BIS
9(Starting, IS 302-1)	-	200	15% discount to BIS
10(Power Input and Current, IS 302-1)	-	1000	15% discount to BIS
11(Heating, IS 302-1)	-	1000	15% discount to BIS
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	750	15% discount to BIS
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	750	15% discount to BIS
14(Transient Over Voltages, IS 302-1)	-	100	15% discount to BIS
15.1(Moisture Resistance, IS 302-1)	-	250	15% discount to BIS
15.2(Moisture Resistance-Spillage test)	-	250	15% discount to BIS
15(Moisture Resistance, IS 302-1)	-	500	15% discount to BIS
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	500	15% discount to BIS
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	500	15% discount to BIS
19(Abnormal Operation, IS 302-1)	-	750	15% discount to BIS
20(Stability & Mechanical Hazards, IS 302-1)	-	500	15% discount to BIS
21(Mechanical Strength, IS 302-1)	-	750	15% discount to BIS
22.1(Construction, IS 302-1)	-	100	15% discount to BIS
22.2(Construction)	-	100	15% discount to BIS
22.3(Construction)	-	100	15% discount to BIS
22.4(Construction)	-	100	15% discount to BIS
22.5(Construction)	-	100	15% discount to BIS
22.6(Construction)	-	100	15% discount to BIS
22.8(Construction)	-	100	15% discount to BIS
22.9(Construction)	-	100	15% discount to BIS
22.1(Construction)	-	500	15% discount to BIS
23(Internal Wiring, IS 302-1)	-	500	15% discount to BIS
24.1(Components, IS 302-1)	-	100	15% discount to BIS
24.2(Components)	-	100	15% discount to BIS
24.4(Components)	-	100	15% discount to BIS
24.5(Components)	-	100	15% discount to BIS
24.6(Components)	-	100	15% discount to BIS
24.7(Components)	-	100	15% discount to BIS
24.8(Components)	-	100	15% discount to BIS
24.9(Components)	-	100	15% discount to BIS
25(Supply Connection and External Flexible Cords, IS 302-1)	-	30	15% discount to BIS
26(Terminals for External Conductors, IS 302-1)	-	500	15% discount to BIS
27(Provision for Earthing, IS 302-1)	-	750	15% discount to BIS
28(Screws & Connections, IS 302-1)	-	500	15% discount to BIS
29(Clearances and Distances through Insulation, IS 302-1)	-	1000	15% discount to BIS
30(Resistance to Heat, Fire, Tracking, IS 302-1)	-	1000	15% discount to BIS
31(Resistance of Rusting, IS 302-1)	-	1000	15% discount to BIS
34.2(Operational tests- Grinding coffee (for machines which have a dry grinding arrangement))	-	150	15% discount to BIS
34.3(Whisking egg whites )	-	200	15% discount to BIS
34.4(IDLI batter-Grinding of black gram)	-	200	15% discount to BIS
34.4(IDLI batter-Grinding of rice)	-	200	15% discount to BIS
34.5.1 (a)(Operational test for juicers )	-	100	15% discount to BIS
34.5.1 (b)(Operational test for juicers )	-	250	15% discount to BIS
34.5.2(Operational test for juicers )	-	250	15% discount to BIS
35(Temperature withstand test for bowl)	-	250	15% discount to BIS
36(Test for controls )	-	750	15% discount to BIS
37(Strength of Assembly )	-	750	15% discount to BIS
25(Supply Connection and External Flexible Cords, IS 302-1)	-	30	15% discount to BIS
25(Supply Connection and External Flexible Cords, IS 302-1)	-	30	15% discount to BIS
25(Supply Connection and External Flexible Cords, IS 302-1)	-	30	15% discount to BIS
25(Supply Connection and External Flexible Cords, IS 302-1)	-	30	15% discount to BIS
25(Supply Connection and External Flexible Cords, IS 302-1)	-	30	15% discount to BIS
25(Supply Connection and External Flexible Cords, IS 302-1)	-	30	15% discount to BIS
25(Supply Connection and External Flexible Cords, IS 302-1)	-	30	15% discount to BIS
25(Supply Connection and External Flexible Cords, IS 302-1)	-	30	15% discount to BIS
25(Supply Connection and External Flexible Cords, IS 302-1)	-	30	15% discount to BIS
25(Supply Connection and External Flexible Cords, IS 302-1)	-	30	15% discount to BIS
25(Supply Connection and External Flexible Cords, IS 302-1)	-	30	15% discount to BIS
25(Supply Connection and External Flexible Cords, IS 302-1)	-	30	15% discount to BIS
25(Supply Connection and External Flexible Cords, IS 302-1)	-	30	15% discount to BIS
25(Supply Connection and External Flexible Cords, IS 302-1)	-	30	15% discount to BIS
25(Supply Connection and External Flexible Cords, IS 302-1)	-	30	15% discount to BIS
25(Supply Connection and External Flexible Cords, IS 302-1)	-	30	15% discount to BIS

31 Dec, 2026

-
-

14156

URS PRODUCTS AND TESTING PVT LTD (F3), NOIDA

8136826

IS 4159 (2002)

Mineral filled sheathed heating elements - Specification (Third Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.6 of IS 4159:2002 & IS 302-1:2008 (Classification)	-	100	15% discount to BIS
Cl.7 of IS 4159:2002 & IS 302-1:2008(Marking )	-	500	15% discount to BIS
Cl.8 of IS 4159:2002 & IS 302‐1:2008(Protection Against Electric Shock)	-	900	15% discount to BIS
Cl.10 of IS 4159:2002 & IS 302-1:2008(Input & Current)	-	1000	15% discount to BIS
Cl.11 of IS 4159:2002 & IS 302‐1:2008(Temperature Rise)	-	1000	15% discount to BIS
Cl.13 of IS 4159:2002 & IS 302-1: 2008(Electrical Insulation and Leakage Current at Operating Temperature)	-	750	15% discount to BIS
Cl.13 of IS 4159:2002 & IS 302-1: 2008(Electrical Insulation and Leakage Current at Operating Temperature)	-	750	15% discount to BIS
Cl.15 of IS 4159:2002 & IS 302-1: 2008(Moisture Resistance)	-	1000	15% discount to BIS
Cl.16 of IS 4159:2002 & IS 302-1: 2008(Insulation Resistance & Electric Strength (after Humidity Treatment))	-	750	15% discount to BIS
Cl.16 of IS 4159:2002 & IS 302-1: 2008(Insulation Resistance & Electric Strength (after Humidity Treatment))	-	750	15% discount to BIS
Cl.18 of IS 4159:2002(Endurance Test )	-	2000	15% discount to BIS
Cl.19 of IS 4159:2002 & IS 302-1: 2008(Abnormal Operation)	-	1000	15% discount to BIS
Cl.20 of IS 4159:2002 & IS 302-1: 2008(Stability & Mechanical Hazards )	-	500	15% discount to BIS
Cl.21 of IS 4159:2002 & IS 302-1: 2008(Mechanical Strength)	-	500	15% discount to BIS
Cl.22 of IS 4159:2002 & IS 302-1: 2008(Construction)	-	300	15% discount to BIS
Cl.23 of IS 4159:2002 & IS 302-1: 2008(Internal Wiring )	-	200	15% discount to BIS
Cl.24 of IS 4159:2002 & IS 302-1: 2008(Component )	-	200	15% discount to BIS
Cl.25 of IS 4159:2002 & IS 302-1: 2008(Supply connection & external flexible cables & cords)	-	300	15% discount to BIS
Cl.26 of IS 4159:2002 & IS 302-1: 2008(Terminals for External Conductors)	-	200	15% discount to BIS
Cl.27 of IS 4159:2002 & IS 302-1: 2008(Provision for Earthing)	-	1000	15% discount to BIS
Cl.28 of IS 4159:2002 & IS 302-1: 2008(Screws & Connection )	-	300	15% discount to BIS
Cl. 29 of IS 4159:2002 & IS 302-1: 2008(Creepage Distances & Clearances)	-	1000	15% discount to BIS
Cl. 30 of IS 4159:2002 & IS 302-1: 2008(Resistance to Heat, Fire and Tracking)	-	500	15% discount to BIS
Cl. 30 of IS 4159:2002 & IS 302-1: 2008(Resistance to Heat, Fire and Tracking)	-	250	15% discount to BIS
Cl. 31 of IS 4159:2002 & IS 302-1: 2008(Resistance to Rusting)	-	750	15% discount to BIS
Cl. 33.1 of IS 4159:2002(Finish Test )	-	750	15% discount to BIS
Cl. 102 of IS 4159:2002(Leakage & Hydrostatic Strength Test (for Oil heating elements) )	-	750	15% discount to BIS

31 Dec, 2026

-
-

14157

URS PRODUCTS AND TESTING PVT LTD (F3), NOIDA

8136826

IS 2082 (2018)

Stationary storage type electric water heaters - Specification (Fifth Revision)

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
(Cl.15 of IS 2082:2018)(Verification of the Rated Capacity)	-	2500	15 % Discount to BIS
(Cl.16 of IS 2082:2018)(Standing Loss per 24 Hours)	-	2500	15 % Discount to BIS
(Cl.17 of IS 2082:2018)(Hot Water Output)	-	2500	15 % Discount to BIS
(Cl.18 of IS 2082:2018)( Reheating Time)	-	2500	15 % Discount to BIS
(Cl.19 of IS 2082:2018)(Mixing Factor)	-	500	15 % Discount to BIS
(Cl.20 of IS 2082:2018)(Deviation of Dial Calibration)	-	500	15 % Discount to BIS
(Cl.21 of IS 2082:2018)(Cyclic Temperature Variation)	-	500	15 % Discount to BIS
(Cl.22 of IS 2082:2018)(Finish)	-	500	15 % Discount to BIS
7(Marking)	-	500	15 % Discount to BIS
6(Classification )	-	500	15 % Discount to BIS
(Cl.8 of IS 302-2-21:2011)(Protection Against Access to Live Parts)	-	500	15 % Discount to BIS
(Cl.10 of IS 302-2-21: 2011)(Power Input & Current)	-	1000	15 % Discount to BIS
(Cl.11 of 302-2-21:2011)(Heating)	-	1000	15 % Discount to BIS
(Cl.13 of IS 302-2-21:2011)(Leakage Current )	-	500	15 % Discount to BIS
(Cl.13 of IS 302-2-21:2011)(Electrical Strength at Operating Temperature)	-	1000	15 % Discount to BIS
(Cl.14ofIS302-2-21:2011)(Transient Over Voltages)	-	500	15 % Discount to BIS
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	1500	15 % Discount to BIS
(Cl.17 of IS 302-2-21:2011)(Overload protection of transformers & associated circuits)	-	500	15 % Discount to BIS
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	500	15 % Discount to BIS
(Cl.20 of IS 302-2-21:2011)(Stability & Mechanical Hazards)	-	500	15 % Discount to BIS
(Cl.21ofIS302-2-21:2011)(Mechanical strength)	-	500	15 % Discount to BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	500	15 % Discount to BIS
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	15 % Discount to BIS
(Cl.24ofIS302-221:2011)(Component)	-	500	15 % Discount to BIS
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	15 % Discount to BIS
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	15 % Discount to BIS
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	500	15 % Discount to BIS
(Cl.28 of IS 302-2-21:2011)(Screws & Connections)	-	500	15 % Discount to BIS
(Cl.29ofIS302-2-21:2011)(Clearances, Creepage Distances and Solid Insulation)	-	500	15 % Discount to BIS
(Cl.30 of IS 302-2-21:2011)(Resistance to Heat & Fire)	-	1000	15 % Discount to BIS
(Cl.31 of IS 302-2-21:2011)(Resistance to Rusting)	-	500	15 % Discount to BIS
7.1(Marking : Rated Voltage )	-	0	Refer to clause 7
7.1(Marking : Symbol for nature of supply )	-	0	Refer to clause 7
7.1(Marking : Rated power input)	-	0	Refer to clause 7
7.1(Marking: Name, trademark or identification mark of manufacturer )	-	0	Refer to clause 7
7.1(Marking: Model or type reference)	-	0	Refer to clause 7
7.1(Marking: Symbol for Class II)	-	0	Refer to clause 7
7.1(Marking: IP Number)	-	0	Refer to clause 7
7.1(Marking : Country of manufacture)	-	0	Refer to clause 7
7.1(Marking : Rated pressure)	-	0	Refer to clause 7
7.1(Marking : Rated capacity)	-	0	Refer to clause 7
7.1(Marking : Statement for a pressure-relief device)	-	0	Refer to clause 7
7.1(Marking : Statement for pressure reducing valve ( For rated pressure less than 0.6 MPa))	-	0	Refer to clause 7
7.1(Marking : Warning for Open- outlet )	-	0	Refer to clause 7
7.6(Marking : Symbol used )	-	0	Refer to clause 7
7.8(Marking : Terminals )	-	0	Refer to clause 7
7.11(Marking : Indication of controls )	-	0	Refer to clause 7
7.13(Marking : Official language of Instruction )	-	0	Refer to clause 7
7.14(Marking : Legibility and durability)	-	0	Refer to clause 7
7.101(Marking : Indifiction of water inlet and water outlet )	-	0	Refer to clause 7
Cl.8 of IS 302-2-21:2018(Protection Against Access to Live Parts)	-	0	Refer to clause 8
Cl.10 of IS 302-2-21: 2018(Power Input & Current)	-	0	Refer to clause 10
Cl.11 of 302-2-21:2018(Heating : Temp of Walls, ceilings and floor of the test corner )	-	0	Refer to clause 11
Cl.11 of 302-2-21:2018(Heating : Temp of Rubber or PVC insulation of internal and external wiring)	-	0	Refer to clause 11
Cl.11 of 302-2-21:2018(Heating : Room Temp.)	-	0	Refer to clause 11
Cl.13 of IS 302-2-21:2018(Leakage Current )	-	0	refer to clause 13
Cl.13 of IS 302-2-21:2018(3 Strength at Operating Temperature)	-	0	refer to clause 13
Cl.14 of IS 302-2-21:2018(Transient Over Voltages)	-	0	refer to clause 14
Cl.15 of IS 302-2-21-2018(Moisture Resistance)	-	0	refer to clause 15
Cl.16 of IS 302-2-21-2018(Leakage current and Electric strength (After humidity): Leakage current )	-	0	refer to clause 16
Cl.16 of IS 302-2-21-2018(Leakage current and Electric strength (After humidity): Electric Strentgh )	-	0	refer to clause 16
Cl.19 of IS 302-2-21:2018(Abnormal Operation : emission of flame or molten metal or poisonous or ignitable gas )	-	0	refer to clause 19
Cl.19 of IS 302-2-21:2018(Abnormal Operation : Wall ceiling temp. of test corner )	-	0	refer to clause 19
Cl.19 of IS 302-2-21:2018(Abnormal Operation : Insulation of the supply cable or cord)	-	0	refer to clause 19
Cl.19 of IS 302-2-21:2018(Abnormal Operation : High Voltage )	-	0	refer to clause 19
Cl.19 of IS 302-2-21:2018(Abnormal Operation : leakage from container during test)	-	0	refer to clause 19
Cl.20 of IS 302-1:2008(Stability & Mechanical Hazards)	-	0	refer to clause 20
Cl.21.1 of IS 302-1:2008(Mechanical strength : Rough handling in normal use)	-	21	refer to clause 21
Cl.21.2 of IS 302-1:2008(Mechanical strength : prevent penetration by sharp implements. )	-	0	refer to clause 21
Cl.22.1 of IS 302-1:2008(Construction : IP test )	-	0	refer to clause 22
Cl.22.2 of IS 302-1:2008(Construction : Provision to ensure all pole disconnection )	-	0	refer to clause 22
Cl.22.6 of IS 302-1:2008(Construction : Effect of water on 3 insulation )	-	0	refer to clause 22
Cl.22.6 of IS 302-2-21:2018(Construction : Size of drain hole )	-	0	refer to clause 22
Cl.22.7 of IS 302-1:2008(Construction: adequate safeguards against the risk of excessive pressure)	-	0	refer to clause 22
Cl.22.11 of IS 302-1:2008(Construction : Fixing of non detachable part )	-	0	refer to clause 22
Cl.22.12 of IS 302-1:2008(Construction : Fixing of Handle, knob, grips, levers and similar parts)	-	0	refer to clause 22
Cl.22.14 of IS 302-1:2008(Construction : ragged or sharp edges)	-	0	refer to clause 22
Cl.22.17 of IS 302-1:2008(Construction : Spacers )	-	0	refer to clause 22
Cl.22.18 Of IS 302-1:2008(Construction : Resistance to corrosion )	-	0	refer to clause 22
Cl 22.26 ,Cl.22.28, Cl 22.29, Cl 22.30 , Cl 22.31, Cl 22.32 of IS 302-1:2008(Construction : Supplymentry/ double / reinforced insulation for Class II/ Class III appliance )	-	0	refer to clause 22
Cl.22.33 of IS 302-1:2008(Construction : Direct contact of liquids )	-	0	refer to clause 22
Cl.22.34, Cl 22.35 of IS 302-1:2008(Construction : Shaft of operating Knobs )	-	0	refer to clause 22
Cl.22.44 of IS 302-1:2008(Construction : Shape and decoration of enclosure)	-	0	refer to clause 22
Cl.22.47 of IS 302-2-21:2018 (Construction : Water pressure test )	-	0	refer to clause 22
Cl.22.101 of IS 302-2-21:2018(Construction : rated pressure of closed water heater )	-	0	refer to clause 22
Cl.22.102 of IS 302-2-21:2018(Construction : repeated drawing of water temp )	-	0	refer to clause 22
Cl.22.103 of IS 302-2-21:2018(Construction : Operation of Pressure relieve devices )	-	0	refer to clause 22
Cl.22.104 of IS 302-2-21:2018(Construction : Outlet of open outlet heater )	-	0	refer to clause 22
Cl.22.106 of IS 302-2-21:2018(Construction : Operation of thermal cut- out )	-	0	refer to clause 22
Cl.22.107 of IS 302-2-21:2018(Construction : Position of Heating elements and thermal control sensor)	-	0	refer to clause 22
Cl.22.108 of IS 302-2-21:2018(Construction : fixing to wall )	-	0	refer to clause 22
Cl.22.109 of IS 302-2-21:2018(Construction : Drain for appliance having a capacity of more than 15 liter)	-	0	refer to clause 22
Cl.22.110 of IS 302-2-21:2018(Construction : Material of Inner conatiner )	-	0	refer to clause 22
Cl.22.110 of IS 302-2-21:2018(Construction : meterial of connections )	-	0	refer to clause 22
Cl.22.111 of IS 302-2-21:2018(Construction : Resistance to vacuum )	-	0	refer to clause 22
Cl. 23 of IS 302-1:2008(Internal Wiring )	-	0	refer to clause 23
Cl. 23 of IS 302-1:2008(Internal Wiring : color identification for earthing conductor )	-	0	refer to clause 23
Cl.24of IS 302-221:2018(Component : Relevent Indian standards )	-	0	refer to clause 24
Cl.24.101 of IS302-221:2018(Component : Location of non self reseting thermal cut out )	-	0	refer to clause 24
Cl.24.102 of IS 302-221:2018(Component : Operation of thermal cut-out )	-	0	refer to clause 24
Cl.25 of IS 302-2-21:2018(Supply Connection & External Flexible Cords : connection to the supply mains)	-	0	refer to clause 25
Cl.25.5 of IS 302-1:2008(Supply Connection & External Flexible Cords : Type of attachment )	-	0	refer to clause 25
Cl.25.8 of IS 302-2-21:2018(Supply Connection & External Flexible Cords : Resistance of supply cord )	-	0	refer to clause 25
Cl.25.10 of IS 302-1:2008(Supply Connection & External Flexible Cords : Colour of Earthing conductor )	-	0	refer to clause 25
Cl.25.12 of IS 302-1:2008(Supply Connection & External Flexible Cords : Moulding of supply cord )	-	0	refer to clause 25
Cl.25.15 of IS 302-1:2008(Supply Connection & External Flexible Cords : Cord grip test )	-	0	refer to clause 25
Cl.25.15 of IS 302-1:2008(Supply Connection & External Flexible Cords : Cord grip test - displacement )	-	0	refer to clause 25
Cl.25.18 of IS 302-1:2008(Supply Connection & External Flexible Cords)	-	0	refer to clause 25
Cl.26 of IS 302-2-21: 2018(Terminals for External Conductors)	-	0	refer to clause 26
Cl.27 of IS 302-2-21:2018(Provision for Earthing)	-	0	refer to clause 27
Cl.27.5 of IS 302-1:2008(Provision for Earthing : ECR )	-	0	refer to clause 27
Cl.28 of IS 302-2-21:2018(Screws & Connections)	-	0	refer to clause 28
Cl.29.1 of IS 302-1:2008(Clearances, Creepage Distances and Solid Insulation : Clearance distance )	-	0	refer to clause 29
Cl.29.2 of IS 302-1:2008(Clearances, Creepage Distances and Solid Insulation : Creepage distance )	-	0	refer to clause 29
Cl.30.1 of IS 302-1:2008(Resistance to Heat & Fire : Ball pressure test )	-	0	refer to clause 30
Cl.30.2 of IS 302-1:2008(Resistance to Heat & Fire : Glow wire test )	-	0	refer to clause 30
Cl.31 of IS 302-2-21:2018(Resistance to Rusting)	-	0	refer to clause 31

31 Dec, 2026

-
Revised version included w.e.f. 28.01.2019.

14158

URS PRODUCTS AND TESTING PVT LTD (F3), NOIDA

8136826

IS 1293 (2019)

Plugs and socket - Outlets of rated Voltage up to and including 250 Volts and rated current up to and including 16 amperes - Specification (Third Revision)

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Ratings)	-	100	15% discount to BIS
7.1.1(Accessories Classification)	-	100	15% discount to BIS
7.1.2(Accessories Classification)	-	100	15% discount to BIS
7.1.3(Accessories Classification)	-	100	15% discount to BIS
7.1.4(Accessories Classification)	-	100	15% discount to BIS
7.1.5(Accessories Classification)	-	100	15% discount to BIS
7.2.1(Socket-Outlets Classification)	-	100	15% discount to BIS
7.2.2(Socket-Outlets Classification)	-	100	15% discount to BIS
7.2.3(Socket-Outlets Classification)	-	100	15% discount to BIS
7.2.4(Socket-Outlets Classification)	-	100	15% discount to BIS
7.3(Plug Classification)	-	100	15% discount to BIS
8.1(MARKING)	-	100	15% discount to BIS
8.8(MARKING)	-	100	15% discount to BIS
8.9(MARKING)	-	200	15% discount to BIS
9.1(CHECKING OF DIMENSIONS)	-	100	15% discount to BIS
9.2(CHECKING OF DIMENSIONS)	-	200	15% discount to BIS
10.1(PROTECTION AGAINST ELECTRIC SHOCK)	-	100	15% discount to BIS
10.3(PROTECTION AGAINST ELECTRIC SHOCK)	-	200	15% discount to BIS
10.4(PROTECTION AGAINST ELECTRIC SHOCK)	-	200	15% discount to BIS
10.5(PROTECTION AGAINST ELECTRIC SHOCK)	-	200	15% discount to BIS
10.6(PROTECTION AGAINST ELECTRIC SHOCK)	-	200	15% discount to BIS
10.7(PROTECTION AGAINST ELECTRIC SHOCK)	-	200	15% discount to BIS
11.1(PROVISIONS FOR EARTHING)	-	200	15% discount to BIS
11.2(PROVISIONS FOR EARTHING)	-	200	15% discount to BIS
11.3(PROVISIONS FOR EARTHING)	-	200	15% discount to BIS
11.4(PROVISIONS FOR EARTHING)	-	200	15% discount to BIS
11.5(PROVISIONS FOR EARTHING)	-	200	15% discount to BIS
11.6(PROVISIONS FOR EARTHING)	-	100	15% discount to BIS
12.1.1(TERMINALS)	-	100	15% discount to BIS
12.1.2(TERMINALS)	-	100	15% discount to BIS
12.2.1(TERMINALS)	-	100	15% discount to BIS
12.2.2(TERMINALS)	-	100	15% discount to BIS
12.2.3(TERMINALS)	-	100	15% discount to BIS
12.2.4(TERMINALS)	-	100	15% discount to BIS
12.2.5(TERMINALS)	-	100	15% discount to BIS
12.2.6(TERMINALS)	-	100	15% discount to BIS
12.2.7(TERMINALS)	-	100	15% discount to BIS
12.2.8(TERMINALS)	-	100	15% discount to BIS
12.2.9(TERMINALS)	-	100	15% discount to BIS
12.2.10(TERMINALS)	-	100	15% discount to BIS
12.2.11(TERMINALS)	-	100	15% discount to BIS
12.3.1(TERMINALS)	-	100	15% discount to BIS
12.3.2(TERMINALS)	-	100	15% discount to BIS
12.3.3(TERMINALS)	-	100	15% discount to BIS
12.3.4(TERMINALS)	-	100	15% discount to BIS
12.3.5(TERMINALS)	-	100	15% discount to BIS
12.3.6(TERMINALS)	-	100	15% discount to BIS
12.3.7(TERMINALS)	-	100	15% discount to BIS
12.3.8(TERMINALS)	-	100	15% discount to BIS
12.3.9(TERMINALS)	-	100	15% discount to BIS
12.3.10(TERMINALS)	-	100	15% discount to BIS
12.3.11(TERMINALS)	-	100	15% discount to BIS
12.3.12(TERMINALS)	-	100	15% discount to BIS
13.1(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	50	15% discount to BIS
13.2(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	50	15% discount to BIS
13.3(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	50	15% discount to BIS
13.4(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	50	15% discount to BIS
13.5(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	50	15% discount to BIS
13.6(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	50	15% discount to BIS
13.7(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	50	15% discount to BIS
13.8(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	50	15% discount to BIS
13.9(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	50	15% discount to BIS
13.1(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	50	15% discount to BIS
13.11(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	50	15% discount to BIS
13.12(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	50	15% discount to BIS
13.13(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	50	15% discount to BIS
13.14(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	50	15% discount to BIS
13.15(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	50	15% discount to BIS
13.16(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	50	15% discount to BIS
13.17(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	50	15% discount to BIS
13.18(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	50	15% discount to BIS
13.19(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	50	15% discount to BIS
13.2(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	50	15% discount to BIS
13.21(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	50	15% discount to BIS
13.22(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	50	15% discount to BIS
13.23(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	50	15% discount to BIS
14.1(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50	15% discount to BIS
14.2(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50	15% discount to BIS
14.3(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50	15% discount to BIS
14.4(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50	15% discount to BIS
14.5(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50	15% discount to BIS
14.6(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50	15% discount to BIS
14.7(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50	15% discount to BIS
14.8(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50	15% discount to BIS
14.9(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50	15% discount to BIS
14.1(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50	15% discount to BIS
14.11(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50	15% discount to BIS
14.12(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50	15% discount to BIS
14.13(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50	15% discount to BIS
14.14(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50	15% discount to BIS
14.15(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50	15% discount to BIS
14.16(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50	15% discount to BIS
14.17(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50	15% discount to BIS
14.18(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50	15% discount to BIS
14.19(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50	15% discount to BIS
14.2(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50	15% discount to BIS
14.21(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50	15% discount to BIS
14.22(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50	15% discount to BIS
14.23(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50	15% discount to BIS
14.23.1(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50	15% discount to BIS
14.23.2(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50	15% discount to BIS
14.24(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50	15% discount to BIS
14.25(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50	15% discount to BIS
14.26(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50	15% discount to BIS
15(INTERLOCKED SOCKET-OUTLETS)	-	500	15% discount to BIS
16.1(RESISTANCE TO AGEING,)	-	1000	15% discount to BIS
16.2(RESISTANCE TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	500	15% discount to BIS
16.3(Resistance to Humidity)	-	500	15% discount to BIS
17.1(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	1000	15% discount to BIS
17.2(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	500	15% discount to BIS
17.3(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	500	15% discount to BIS
18(OPERATION OF EARTHING CONTACTS)	-	500	15% discount to BIS
19(TEMPERATURE RISE)	-	2000	15% discount to BIS
20(BREAKING CAPACITY)	-	1500	15% discount to BIS
21(NORMAL OPERATION)	-	500	15% discount to BIS
22.1(Verification of the Maximum Withdrawal Force)	-	250	15% discount to BIS
22.2(Verification of Minimum Withdrawal Force)	-	250	15% discount to BIS
23.1(FLEXIBLE CABLES AND THEIR CONNECTION)	-	100	15% discount to BIS
23.3(FLEXIBLE CABLES AND THEIR CONNECTION)	-	200	15% discount to BIS
23.4(FLEXIBLE CABLES AND THEIR CONNECTION)	-	200	15% discount to BIS
24.1(MECHANICAL STRENGTH For all kinds of fixed socket-outlets )	-	50	15% discount to BIS
24.2(MECHANICAL STRENGTH For portable single socket-outlets: 1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	50	15% discount to BIS
24.3(MECHANICAL STRENGTH for fixed socket-outlets with a main part intended to be mounted directly on a surface)	-	50	15% discount to BIS
24.4(MECHANICAL STRENGTH For Plug 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	50	15% discount to BIS
24.5(MECHANICAL STRENGTH For portable single socket-outlets: 1) with enclosures, covers or bodies of thermoplastic or elastomeric material)	-	50	15% discount to BIS
24.6(MECHANICAL STRENGTH For screwed glands of accessories having an IP code higher than IP20)	-	50	15% discount to BIS
24.7(MECHANICAL STRENGTH For plug pins provided with insulating sleeves)	-	50	15% discount to BIS
24.8(MECHANICAL STRENGTH For shuttered socket-outlets)	-	50	15% discount to BIS
24.9(MECHANICAL STRENGTH For portable multiple and combined socket outlets (1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	50	15% discount to BIS
24.1(MECHANICAL STRENGTH For Plug (1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	50	15% discount to BIS
24.11(MECHANICAL STRENGTH For portable socket-outlets having means for suspension on a wall)	-	50	15% discount to BIS
24.12(MECHANICAL STRENGTH For portable socket-outlets having means for suspension on a wall)	-	50	15% discount to BIS
24.13(MECHANICAL STRENGTH For portable socket-outlets having means for suspension on a wall)	-	50	15% discount to BIS
24.14.1(MECHANICAL STRENGTH For fixed socket-outlets)	-	50	15% discount to BIS
24.14.2(MECHANICAL STRENGTH For fixed socket-outlets)	-	50	15% discount to BIS
24.14.3(MECHANICAL STRENGTH For plugs and portable socket-outlets)	-	50	15% discount to BIS
24.15(MECHANICAL STRENGTH )	-	50	15% discount to BIS
24.16(MECHANICAL STRENGTH For shroud of portable socket-outlets)	-	50	15% discount to BIS
25.1(RESISTANCE TO HEAT Accessories and surface mounting boxes)	-	250	15% discount to BIS
25.2(RESISTANCE TO HEAT Parts of insulating material necessary to retain current-carrying parts of the earthing circuit in position, as well as parts of the front surface zone of thermoplastic material)	-	250	15% discount to BIS
25.3(RESISTANCE TO HEAT Parts of insulating material not necessary to retain current-carrying parts and parts of the earthing circuit in position, even though they are in contact with them)	-	250	15% discount to BIS
25.4(RESISTANCE TO HEAT )	-	250	15% discount to BIS
26.1(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	100	15% discount to BIS
26.2(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	100	15% discount to BIS
26.3(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	100	15% discount to BIS
26.4(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	100	15% discount to BIS
26.5(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	100	15% discount to BIS
26.6(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	100	15% discount to BIS
26.7(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	100	15% discount to BIS
27.1(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	150	15% discount to BIS
27.2(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	150	15% discount to BIS
27.3(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	200	15% discount to BIS
28.1.1(Resistance to Abnormal Heat and to Fire Glow-Wire Test)	-	250	15% discount to BIS
28.1.2(Resistance to Abnormal Heat and to Fire for plugs with pins provided with insulating sleeves)	-	250	15% discount to BIS
28.2(Resistance to Tracking For accessories other than IP code higher than IPX0 parts of insulating material retaining live parts in position)	-	500	15% discount to BIS
29(RESISTANCE TO RUSTING)	-	500	15% discount to BIS
30.1(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Pressure Test at High Temperature)	-	150	15% discount to BIS
30.2(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Static Damp Heat Test)	-	150	15% discount to BIS
30.3(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Tests at Low Temperature)	-	100	15% discount to BIS
30.4(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Impact Test at Low Temperature)	-	100	15% discount to BIS
23.2(FLEXIBLE CABLES AND THEIR CONNECTION)	-	100	15% discount to BIS
8.2(Marking)	-	100	15% discount to BIS
8.3(Marking)	-	100	15% discount to BIS
8.4(Marking)	-	100	15% discount to BIS
8.5(Marking)	-	100	15% discount to BIS
8.6(Marking)	-	100	15% discount to BIS
8.7(Marking)	-	100	15% discount to BIS
10.2(PROTECTION AGAINST ELECTRIC SHOCK)	-	100	15% discount to BIS
24.17(MECHANICAL STRENGTH)	-	100	15% discount to BIS
24.18(MECHANICAL STRENGTH)	-	100	15% discount to BIS
24.19(MECHANICAL STRENGTH)	-	100	15% discount to BIS
21(NORMAL OPERATION)	-	500	15% discount to BIS

31 Dec, 2026

-
Included w.e.f. 24-07-2020.

14159

URS PRODUCTS AND TESTING PVT LTD (F3), NOIDA

8136826

IS 369 (2019)

Household electric direct - Acting room heaters - Performance requirements (Fourth Revision)

Not Applicable

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.6 of IS 302-2-30:2007(Classification)	-	100	15% discount to BIS
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	100	15% discount to BIS
Cl.8 of IS 302-2-30:2007 &IS:302-1:2008(Protection Against Access to Live Parts)	-	100	15% discount to BIS
Cl.10 of IS 302-2-30:2007 &IS:302-1:2008(Power Input and Current)	-	100	15% discount to BIS
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008(Heating)	-	100	15% discount to BIS
Cl.13 of IS 302-2-30:2007 &IS:302-1:2008(Leakage Current & Electric Strength at operating temp)	-	100	15% discount to BIS
Cl.14 of IS 302-2-30:2007 &IS:302-1:2008(Transient Over Voltages)	-	100	15% discount to BIS
Cl.15 of IS 302-2-30:2007 &IS:302-1:2008(Moisture Resistance)	-	100	15% discount to BIS

31 Dec, 2026

-
-

14160

BIS, Southern Regional Laboratory (SRL)

None

IS 3196 : Part 2 (2006)

Welded low carbon steel cylinders exceeding 5 litre water capacity for low pressure liquefiable gases: Part 2 cylinders for liquefiable non - Toxic gases other than lpg - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
19 (Marking)	-
9 (Valve Connection)	-
9 (Valve Protection)	-
9 (Valve Protection)	-
9 (Valve Protection)	-
10 (Handle)	-
10 (Foot ring)	-
10 (Foot ring)	-
10 (Foot ring)	-
10.3 (Bung)	-
14 (Water Capacity)	-
16 (Pneumatic Leakage Test)	-
18.1.3 (Root Bend test,)	-
18.1.3 (Face Bend Test,)	-
18.1.5 (Minimum Thickness test)	-
20 (Colour Identification)	-
10.3 (Bung)	-

-
2nos Excluding except material test, Hydrostatic stretch test,RADIOGRAPHIC EXAMINATION (Prepared Test piece needed for Acceptance Test). Test facility for hydrostatic test is limited to 360Kg/cm2 pressure.

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number