| 14161 |
National Metallurgical Laboratory Unit, Chennai
| 6107814
| IS 280 (2006) |
Mild steel wire for general engineering purposes (Fourth Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
No Record Found
|
|
- |
-
(Lab of national repute and eminence, facilities of which are being utilized by BIS.) |
| 14162 |
MSME Testing Centre, New Delhi
| 8101204
| IS 280 (2006) |
Mild steel wire for general engineering purposes (Fourth Revision) |
Upto 4mm |
12780 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 7 & Table 1(Diameter & Difference Between Two Reading On Any Two Diameters) |
- |
520 |
|
Dimension |
| Cl 9(Tensile Test On UTM) |
- |
1444 |
|
- |
| Cl 13(Workmanship) |
- |
520 |
|
Freedom from defects |
| 6 AND AS PER IS 7887(MICRO ALLOY) |
- |
4895 |
|
Chemical Composition |
| Cl 11(Workmanship) |
- |
2772 |
|
Coating Test |
| 9.2(Wrapping Test) |
- |
1271 |
|
- |
| Cl 9(Tensile Test On UTM) |
- |
1358 |
|
Bend Test |
|
31 Dec, 2026 |
-
- |
| 14163 |
Central Power Research Institute (CPRI), Bangalore
| 6101024
| IS 648 (2006) |
Cold rolled non-oriented electrical steel sheet and strip - Fully processed type - Specification (Fifth Revision) |
- |
30000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 8.3(Length) |
- |
1100 |
|
- |
|
31 Dec, 2026 |
-
- |
| 14164 |
National Metallurgical Laboratory Unit, Chennai
| 6107814
| IS 3601 (2006) |
Steel tubes for mechanical and general engineering purposes - Specification (Second Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
No Record Found
|
|
- |
-
(Lab of national repute and eminence, facilities of which are being utilized by BIS.) |
| 14165 |
MSME Testing Centre, New Delhi
| 8101204
| IS 3601 (2006) |
Steel tubes for mechanical and general engineering purposes - Specification (Second Revision) |
- |
16495 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1(Sulphur-Percentage by mass) |
- |
3795 |
|
Chemical Composition Test |
| 8.0(Straightness) |
- |
1352 |
|
- |
| 19.1.1, 24.1.1, 28.1.1, 33.1.1(Dimensions- Outside Dia) |
- |
2234 |
|
- |
| 11.2(Surface Protection) |
- |
1386 |
|
- |
| 13.1.3(Tensile Strength) |
- |
1790 |
|
Tensile, Yield Strength and Elongation |
| 13.2(Flattening Test) |
- |
1525 |
|
- |
| 13.3(Bend Test (Strip)) |
- |
1444 |
|
- |
| 13.4(Bend Test (Whole Tube)) |
- |
1444 |
|
- |
| 13.5(Drift Expansion Test) |
- |
1525 |
|
- |
|
31 Dec, 2026 |
-
- |
| 14166 |
MSME Testing Centre, New Delhi
| 8101204
| IS 302 : Part 2 : Sec 3 (2007) |
Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 3 electric iron (First Revision) |
- |
12000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 8( Protection Against Electric Shock, IS 302-1) |
- |
2000 |
|
- |
| 10(Power Input and Current, IS 302-1) |
- |
2500 |
|
- |
| 13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1) |
- |
4000 |
|
- |
| 14(Transient Over Voltages, IS 302-1) |
- |
2000 |
|
- |
| 15.1(Moisture Resistance, IS 302-1) |
- |
4000 |
|
- |
| 16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1) |
- |
4000 |
|
- |
| 19.4(Abnormal Operation, IS 302-1) |
- |
2000 |
|
- |
| 21.101(Mechanical Strength, IS 302-2-3) |
- |
2000 |
|
- |
| 25.2(Supply Connection and External Flexible Cords, IS 302-1) |
- |
2000 |
|
- |
| 26(Terminals for External Conductors, IS 302-1) |
- |
2000 |
|
- |
| 27.1(Provision for Earthing, IS 302-1) |
- |
2000 |
|
- |
| 28(Screws & Connections, IS 302-1) |
- |
2000 |
|
- |
| 30.1(Resistance to Heat, Fire & Tracking, IS 302-1) |
- |
4000 |
|
- |
| 31(Resistance of Rusting, IS 302-1) |
- |
2500 |
|
- |
| 11(Heating, IS 302-1) |
- |
2500 |
|
- |
| 20.1(Stability & Mechanical Hazards, IS 302-1) |
- |
5000 |
|
- |
| 29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1) |
- |
2500 |
|
- |
|
31 Dec, 2026 |
-
Excl: Cl. 19.11.4.1 to Cl. 19.11.4.7 (EMI/EMC tests) |
| 14167 |
MSME Testing Centre, New Delhi
| 8101204
| IS 302 : Part 2 : Sec 30 (2007) |
Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 30 room heaters (First Revision) |
- |
12000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl.8 & IS:302-1:2008(Protection Against Access to Live Parts) |
- |
2500 |
|
- |
| Cl.10 & IS:302-1:2008(Power Input and Current) |
- |
2500 |
|
- |
| Cl.11 of IS:302-2:30: 2007(Heating : Temperature rise in winding) |
- |
3000 |
|
- |
| Cl.13 & IS:302-1:2008(Leakage Current & Electric Strength at operating temp. ) |
- |
4000 |
|
- |
| Cl.14 & IS:302-1:2008(Transient Over Voltages) |
- |
2000 |
|
- |
| Cl.15 & IS: 302-1:2008(Moisture Resistance
) |
- |
4000 |
|
- |
| Cl.16 of IS:302-1:2008(Leakage current and Electric strength (After humidity): Leakage current ) |
- |
4000 |
|
- |
| Cl.19.108(Abnormal Operation.) |
- |
2000 |
|
- |
| Cl.21 & IS:302-1:2008)(Mechanical Strength.) |
- |
2000 |
|
- |
| Cl.25.1 of 302-1:2008(Supply Connection and External Flexible Cords ) |
- |
2000 |
|
- |
| Cl.26.1 of IS 302-1:2008(Terminal for External Conductors
) |
- |
2000 |
|
- |
| Cl.27.1 of 302-1:2008(Provision for Earthing.) |
- |
2000 |
|
- |
| Cl.28 of 302-1:2008(Screws and Connections.) |
- |
2000 |
|
- |
| Cl.30 & IS:302-1:2008(Resistance to Heat and Fire) |
- |
4000 |
|
- |
| Cl.31 & IS:302-1:2008(Resistance to Rusting.) |
- |
2500 |
|
- |
| Cl.29 & IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation) |
- |
2500 |
|
- |
| Cl.20 & IS:302-1:2008(Stability & Mechanical Hazards) |
- |
5000 |
|
- |
| Cl.22.7 of IS 302-1:2008(Construction) |
- |
2000 |
|
- |
| C.23.7 of 302-1:2008(Internal Wiring
) |
- |
2000 |
|
2000 |
| C.24.1.4(Component) |
- |
2000 |
|
- |
| Cl.32 & IS:302-1:2008(Radition,Toxicity and similar Hazards.) |
- |
2000 |
|
- |
| Cl.6 (Classification) |
- |
1000 |
|
- |
| Cl.17 & IS:302-1:2008(Over load Protection of Transformers and Associated Circuits ) |
- |
2000 |
|
- |
| Cl.18 (Endurance. ) |
- |
4000 |
|
- |
| Cl.6 (Classification) |
- |
2000 |
|
- |
| Cl.7 & IS:302-1:2008(Marking and Instructions) |
- |
2000 |
|
- |
| Cl.7 & IS:302-1:2008(Marking and Instructions) |
- |
2000 |
|
- |
| Cl.7 & IS:302-1:2008(Marking and Instructions) |
- |
2000 |
|
- |
| Cl.7 & IS:302-1:2008(Marking and Instructions) |
- |
2000 |
|
- |
| Cl.7 & IS:302-1:2008(Marking and Instructions) |
- |
2000 |
|
- |
| Cl.7 & IS:302-1:2008(Marking and Instructions) |
- |
2000 |
|
- |
| Cl.7(Marking and Instructions) |
- |
2000 |
|
- |
| Cl.7.3(Marking and Instructions) |
- |
2000 |
|
- |
| Cl.7.3(Marking and Instructions) |
- |
2000 |
|
- |
| Cl.7.4(Marking and Instructions) |
- |
2000 |
|
- |
| Cl.7.5(Marking and Instructions) |
- |
2000 |
|
- |
| Cl.7.6 & IS:302-1:2008(Marking and Instructions) |
- |
2000 |
|
- |
| Cl.7.8 of IS :302-1:2008(Marking and Instructions) |
- |
2000 |
|
- |
| Cl.7.9 of IS :302-1:2008(Marking and Instructions) |
- |
2000 |
|
- |
| Cl.7.10 of IS :302-1:2008(Marking and Instructions) |
- |
2000 |
|
- |
| Cl.7.11 of IS :302-1:2008(Marking and Instructions) |
- |
2000 |
|
- |
| Cl.7.12 & IS:302-1:2008(Marking and Instructions) |
- |
2000 |
|
- |
| Cl.7.12 & IS:302-1:2008(Marking and Instructions) |
- |
2000 |
|
- |
| Cl.7.12 & IS:302-1:2008(Marking and Instructions) |
- |
2000 |
|
- |
| Cl.7.12 & IS:302-1:2008(Marking and Instructions) |
- |
2000 |
|
- |
| Cl.7.12 & IS:302-1:2008(Marking and Instructions) |
- |
2000 |
|
- |
| Cl.7.12 & IS:302-1:2008(Marking and Instructions) |
- |
2000 |
|
- |
| Cl.7.12 & IS:302-1:2008(Marking and Instructions) |
- |
2000 |
|
- |
| Cl.7.12 & IS:302-1:2008(Marking and Instructions) |
- |
2000 |
|
- |
| Cl.7.12 & IS:302-1:2008(Marking and Instructions) |
- |
2000 |
|
- |
| Cl.7.12.1 & IS:302-1:2008(Marking and Instructions) |
- |
2000 |
|
- |
| Cl.7.12.1 & IS:302-1:2008(Marking and Instructions) |
- |
2000 |
|
- |
| Cl.7.12.1 & IS:302-1:2009(Marking and Instructions) |
- |
2000 |
|
- |
| Cl.7.12.1 & IS:302-1:2008(Marking and Instructions) |
- |
2000 |
|
- |
| Cl.7.12.1 & IS:302-1:2008(Marking and Instructions) |
- |
2000 |
|
- |
| Cl.7.12.1 & IS:302-1:2008(Marking and Instructions) |
- |
2000 |
|
- |
| Cl.7.12.1 & IS:302-1:2008(Marking and Instructions) |
- |
2000 |
|
- |
| Cl.7.12.1 & IS:302-1:2008(Marking and Instructions) |
- |
2000 |
|
- |
| Cl.7.13 of IS 302-1:2008(Marking and Instructions) |
- |
2000 |
|
- |
| Cl.7.14(Marking and Instructions) |
- |
2000 |
|
- |
| Cl.7.14 of IS302-1:2008(Marking and Instructions) |
- |
2000 |
|
- |
| Cl.7.15 of IS 302-1:2008(Marking and Instructions) |
- |
2000 |
|
- |
| Cl.7.15 of IS 302-1:2008(Marking and Instructions) |
- |
2000 |
|
- |
| Cl.7.15 of IS 302-1:2008(Marking and Instructions) |
- |
2000 |
|
- |
| Cl.7.101(Marking and Instructions) |
- |
2000 |
|
- |
| Cl.11 & IS:302-1:2008(Heating) |
- |
3000 |
|
- |
| Cl.11 & IS:302-1:2008(Heating) |
- |
3000 |
|
- |
| Cl.11 & IS:302-1:2008(Heating) |
- |
3000 |
|
- |
| Cl.11 & IS:302-1:2008(Heating) |
- |
3000 |
|
- |
| Cl.11 & IS:302-1:2008(Heating) |
- |
3000 |
|
- |
| Cl.11 & IS:302-1:2008(Heating) |
- |
3000 |
|
- |
| Cl.11 & IS:302-1:2008(Heating) |
- |
3000 |
|
- |
| Cl.11 & IS:302-1:2008(Heating) |
- |
3000 |
|
- |
| Cl.11 & IS:302-1:2008(Heating) |
- |
3000 |
|
- |
| Cl.11 & IS:302-1:2008(Heating) |
- |
3000 |
|
- |
| Cl.11 & IS:302-1:2008(Heating) |
- |
3000 |
|
- |
| Cl.11 & IS:302-1:2008(Heating) |
- |
3000 |
|
- |
| Cl.11.8(Heating) |
- |
3000 |
|
- |
| Cl.11.8(Heating) |
- |
3000 |
|
- |
| Cl.11.8(Heating) |
- |
3000 |
|
- |
| Cl.13 & IS:302-1:2008(Leakage Current & Electric Strength at operating temp. ) |
- |
4000 |
|
- |
| Cl.15.3 of IS 302-1:200(Moisture Resistance
) |
- |
4500 |
|
- |
| Cl.16 & IS:302-1:2008(Leakage Current & Electric Strength ) |
- |
4000 |
|
- |
| Cl.16 & IS:302-1:2008(Leakage Current & Electric Strength ) |
- |
4000 |
|
- |
| Cl.19 & IS:302-1:2008(Abnormal Operation.) |
- |
2000 |
|
- |
| Cl.19 & IS:302-1:2008(Abnormal Operation.) |
- |
2000 |
|
- |
| Cl.19.101(Abnormal Operation.) |
- |
2000 |
|
- |
| Cl.19.102(Abnormal Operation.) |
- |
2000 |
|
- |
| Cl.19.103(Abnormal Operation.) |
- |
2000 |
|
- |
| Cl.19.104(Abnormal Operation.) |
- |
2000 |
|
- |
| Cl.19.105(Abnormal Operation.) |
- |
2000 |
|
- |
| Cl.19.106(Abnormal Operation.) |
- |
2000 |
|
- |
| Table 8 of IS 302-1:2008(Abnormal Operation.) |
- |
2000 |
|
- |
| Cl.19.107(Abnormal Operation.) |
- |
2000 |
|
- |
| Cl.19.109(Abnormal Operation.) |
- |
2000 |
|
- |
| Cl.19.110(Abnormal Operation.) |
- |
2000 |
|
- |
| Cl.19.111(Abnormal Operation.) |
- |
2000 |
|
- |
| Cl.19.112(Abnormal Operation.) |
- |
2000 |
|
- |
| Cl.19.113(Abnormal Operation.) |
- |
2000 |
|
- |
| Cl.19.114(Abnormal Operation.) |
- |
2000 |
|
- |
| Cl.21.2 of IS 302-1:2008(Mechanical Strength.) |
- |
2000 |
|
- |
| Cl.21.101 (Mechanical Strength.) |
- |
2000 |
|
- |
| Cl.21.102(Mechanical Strength.) |
- |
2000 |
|
- |
| Cl.21.103(Mechanical Strength.) |
- |
2000 |
|
- |
| Cl.22.5 of IS 302-1:2008(Construction) |
- |
2000 |
|
- |
| Cl.22.6 of IS 302-1:2008(Construction) |
- |
2000 |
|
- |
| Cl.22.8 of IS 302-1:2008(Construction) |
- |
2000 |
|
- |
| Cl.22.9 of IS 302-1:2008(Construction) |
- |
2000 |
|
- |
| Cl.22.11(Construction) |
- |
2000 |
|
- |
| Cl.22.12 of IS 302-1:2008(Construction) |
- |
2000 |
|
- |
| Cl.22.13 of IS 302-1:2008(Construction) |
- |
2000 |
|
- |
| Cl.22.14 of IS 302-1:2008(Construction) |
- |
2000 |
|
- |
| Cl.22.15 of IS 302-1:2008(Construction) |
- |
2000 |
|
- |
| Cl.22.18 of IS 302-1:2008(Construction) |
- |
2000 |
|
- |
| Cl.22.20 of IS 302-1:2008(Construction) |
- |
2000 |
|
- |
| Cl.22.21 of IS 302-1:2008(Construction) |
- |
2000 |
|
- |
| Cl.23.4 & Cl.29 of 302-1:2008(Internal Wiring
) |
- |
2000 |
|
- |
| Cl.23.5 of 302-1:2008(Internal Wiring
) |
- |
2000 |
|
- |
| Cl.23.7 of 302-1:2008(Internal Wiring
) |
- |
2000 |
|
- |
| Cl.24.1 of 302-1:2008(Component) |
- |
2000 |
|
- |
| Cl.24.1.3 (Component) |
- |
2000 |
|
- |
| Cl.24.1.3 (Component) |
- |
2000 |
|
- |
| Cl.24.1.3 (Component) |
- |
2000 |
|
- |
| Cl.24.1.3 (Component) |
- |
2000 |
|
- |
| C.24.2 of 302-1:2008(Component) |
- |
2000 |
|
- |
| Cl.24.10(Component) |
- |
2000 |
|
- |
| Cl. 25.2 of IS 3021:2008(Supply Connection and External Flexible Cords ) |
- |
2000 |
|
- |
| Cl. 25.3 of IS 302-1:2008(Supply Connection and External Flexible Cords ) |
- |
2000 |
|
- |
| Cl. 25.4 of IS 302-1:2008(Supply Connection and External Flexible Cords ) |
- |
2000 |
|
- |
| Cl.25.5 of 302-1:2008(Supply Connection and External Flexible Cords ) |
- |
2000 |
|
- |
| Cl.25.6 of 302-1:2008(Supply Connection and External Flexible Cords ) |
- |
2000 |
|
- |
| Cl.25.7.(Supply Connection and External Flexible Cords ) |
- |
2000 |
|
- |
| Cl.25.8(Supply Connection and External Flexible Cords ) |
- |
2000 |
|
- |
| Cl. 25.9(Supply Connection and External Flexible Cords ) |
- |
2000 |
|
- |
| Cl.25.10 of 302-1:2008(Supply Connection and External Flexible Cords ) |
- |
2000 |
|
- |
| Cl. 25.11(Supply Connection and External Flexible Cords ) |
- |
2000 |
|
- |
| Cl. 25.12(Supply Connection and External Flexible Cords ) |
- |
2000 |
|
- |
| Cl. 25.13(Supply Connection and External Flexible Cords ) |
- |
2000 |
|
- |
| Cl.25.14 of IS 302-1:2008(Supply Connection and External Flexible Cords ) |
- |
2000 |
|
- |
| Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords ) |
- |
2000 |
|
- |
| Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords ) |
- |
2000 |
|
- |
| Cl.25.17 of IS 302-1:2008(Supply Connection and External Flexible Cords ) |
- |
2000 |
|
- |
| Cl.25.18(Supply Connection and External Flexible Cords ) |
- |
2000 |
|
- |
| Cl.25.20(Supply Connection and External Flexible Cords ) |
- |
2000 |
|
- |
| Cl.26.10 of IS 302-1:2008(Terminal for External Conductors
) |
- |
2000 |
|
- |
| Cl.26.11 of IS 302-1:2008(Terminal for External Conductors
) |
- |
2000 |
|
- |
| Cl.27.5 of 302-1:2008(Provision for Earthing.) |
- |
2000 |
|
- |
| Cl.29 & IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation) |
- |
2500 |
|
- |
| Cl.30.2.2 of 302-1:2008(Resistance to Heat and Fire) |
- |
4000 |
|
- |
| Cl.31 of IS:302-1:2008(Resistance to Rusting.) |
- |
2500 |
|
- |
| Cl.30.2 of 302-1:2008(Resistance to Heat and Fire : Resistance to fire) |
- |
4000 |
|
- |
| Cl.30.1 of IS:302-1:2008(Resistance to Heat and Fire: Resistance to heat. ) |
- |
4000 |
|
- |
| Cl.29.2 of IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation : Creepage Distance) |
- |
2500 |
|
- |
| Cl.29.1 of IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation : Clearance ) |
- |
2500 |
|
- |
| Cl.28 of 302-1:2008(Screws and Connections.) |
- |
2000 |
|
- |
| Cl.27.5 of 302-1:2008(Provision for Earthing : ECR) |
- |
2000 |
|
- |
| Cl.27.1 of 302-1:2008(Provision for Earthing ) |
- |
2000 |
|
- |
| Cl.26 of IS 302-1:2008(Terminal for External Conductors
) |
- |
2000 |
|
- |
| Cl.25.20 of 302-1:2008(Supply Connection and External Flexible Cords : Additional insulation ) |
- |
2000 |
|
- |
| Cl.25.18 of 302-1:2008(Supply Connection and External Flexible Cords : Arrangement of cord anchorages ) |
- |
2000 |
|
- |
| Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords : Cord grip test - displacement) |
- |
2000 |
|
- |
| Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords : Cord grip test - strain at terminals ) |
- |
2000 |
|
- |
| Cl. 25.13 of 302-1:2008(Supply Connection and External Flexible Cords : Inlet opening of supply cords ) |
- |
2000 |
|
- |
| Cl. 25.12 of 302-1:2008(Supply Connection and External Flexible Cords : Moulding of cords ) |
- |
2000 |
|
- |
| Cl.25.10 of 302-1:2008(Supply Connection and External Flexible Cords : Colour of earthing wire ) |
- |
2000 |
|
- |
| Cl. 25.9 of 302-1:2008(Supply Connection and External Flexible Cords : Contact with sharp edge ) |
- |
2000 |
|
- |
| Cl.25.8 of 302-1:2008(Supply Connection and External Flexible Cords : Resistance of supply wires ) |
- |
2000 |
|
- |
| Cl.25.7 of IS:302-2-30:2007(Supply Connection and External Flexible Cords : Supply cords material ) |
- |
2000 |
|
- |
| Cl.25.5 of 302-1:2008(Supply Connection and External Flexible Cords : Type of attachments ) |
- |
2000 |
|
- |
| Cl.25.1 of 302-1:2008(Supply Connection and External Flexible Cords : Means of connection ) |
- |
2000 |
|
- |
| Cl.24 of IS:302-2-30:2007(Component) |
- |
2000 |
|
- |
| Cl.23.7 of 302-1:2008(Internal Wiring : Colour of earting conductor
) |
- |
2000 |
|
- |
| Cl.23 of IS:302-1:2008(Internal Wiring
) |
- |
2000 |
|
- |
| Cl.22.106 of IS:302-2-30:2007(Construction : Checking of thermostats, timers or similar means for visibl glowing radiant heaters) |
- |
2000 |
|
- |
| Cl.22.106 of IS:302-2-30:2007(Construction : Checking of openings on the underside) |
- |
2000 |
|
- |
| Cl.22.102 & Cl 22.103 of IS:302-2-30:2007(Construction : Fireguard ) |
- |
2000 |
|
- |
| Cl.22.101 of IS:302-2-30:2007(Construction : Prevention to contact with heating element) |
- |
2000 |
|
- |
| Cl.22.24 of IS:302-2-30:2007(Construction : test of bare heating element) |
- |
2000 |
|
- |
| Cl.22.18 of IS 302-1:2008(Construction : Resistance to corrosion ) |
- |
2000 |
|
- |
| Cl.22.14 of IS 302-1:2008(Construction : ragged and sharp edges) |
- |
2000 |
|
- |
| Cl.22.13 of IS 302-1:2008(Construction : Position of handles ) |
- |
2000 |
|
- |
| Cl.22.12 of IS 302-1:2008(Construction : Fixing of Handle, knobs,grips,lever and similer parts ) |
- |
2000 |
|
- |
| Cl.22.11 of IS 302-1:2008(Construction : Fixing of non detachable parts ) |
- |
2000 |
|
- |
| Cl.22.7 of IS:302-2-30:2007(Construction : Pressure test of oil heater ) |
- |
2000 |
|
- |
| Cl.21.101 of IS:302-2-30:2007(Mechanical Strength : fire gaurd deformation test ) |
- |
2000 |
|
- |
| Cl.21.2 of IS 302-1:2008(Mechanical Strength : Pentration by sharp implementation ) |
- |
2000 |
|
- |
| Cl.21.1 of IS:302-1:2008)(Mechanical Strength : Rough handling ) |
- |
2000 |
|
- |
| Cl.20 of IS:302-2-30:2007(Stability of Mechanical Hazards) |
- |
5000 |
|
- |
| Cl.19.114 of IS:302-2-30:2007(Abnormal Operation : the temp. of the surface of the container for oil heaters ) |
- |
2000 |
|
- |
| Cl.19.112 of IS:302-2-30:2007(Abnormal Operation : Ignition of bleached cotton gauge) |
- |
2000 |
|
- |
| Cl.19.111 of IS:302-2-30:2007(Abnormal Operation : Ignition of flannelette for Visibly glowing heaters) |
- |
2000 |
|
- |
| Cl.19.110 of IS:302-2-30:2007(Abnormal Operation : operation against wall for visibly glowing radiant heaters ) |
- |
2000 |
|
- |
| Cl.19.109 of IS:302-2-30:2007(Abnormal Operation : operation against wall for fan heater ) |
- |
2000 |
|
- |
| Cl.19.106 of IS:302-2-30:2007(Abnormal Operation : Locked rotor of fan hetear ) |
- |
2000 |
|
- |
| Cl.19.103 , Cl 19.104 of IS:302-2-30:2007(Abnormal Operation : Operation after Covering by cotton) |
- |
2000 |
|
- |
| Cl.19 of IS:302-2-30:2007(Abnormal Operation : High Voltage ) |
- |
2000 |
|
- |
| Cl.19 of IS:302-2-30:2007(Abnormal Operation : temp rise of supply cord ) |
- |
2000 |
|
- |
| Cl.19 of IS:302-2-30:2007(Abnormal Operation : Temp rise of test corner ) |
- |
2000 |
|
- |
| Cl.19 of IS:302-1:2008(Abnormal Operation : Emission of molten or poisonous or ignitable gas) |
- |
2000 |
|
- |
| Cl.15 of IS 302-1:2008(Moisture Resistance
) |
- |
4000 |
|
- |
| Cl.14 of IS:302-1:2008(Transient Over Voltages) |
- |
2000 |
|
- |
| Cl.13 of IS:302-1:2008(Leakage Current of Electric Strength at operating temp. ) |
- |
4000 |
|
- |
| Cl.13 of IS:302-1:2008(Leakage Current of Electric Strength at operating temp. ) |
- |
4000 |
|
- |
| Cl.11 of IS:302-2:30: 2007(Heating : Room temperature) |
- |
3000 |
|
- |
| Cl.11.8 of IS:302-2:30: 2007(Heating : For liquid filled radiators the temp. rise of the outer surface of the liquid container) |
- |
3000 |
|
- |
| Cl.11 of IS:302-2:30: 2007(Heating : Air-outlet grills) |
- |
3000 |
|
- |
| Cl.11 of IS:302-2:30: 2007(Heating : Surfaces of handles, knobs, grips and similar parts) |
- |
3000 |
|
- |
| Cl.11 of IS:302-2:30: 2007(Heating : Wooden supports, walls, ceiling and floor of the test corner) |
- |
3000 |
|
- |
| Cl.11 of IS:302-2:30: 2007(Heating : PVC Insulation ) |
- |
3000 |
|
- |
| Cl.10 of IS:302-1:2008(Power Input and Current) |
- |
2500 |
|
- |
| Cl.8 of IS:302-1:2008(Protection Against Access to Live Parts) |
- |
2500 |
|
- |
| Cl.7.101 of IS:302-2:30: 2007(Marking and Instructions : standard mark. ) |
- |
2000 |
|
- |
| Cl.7.15 of IS 302-1:2008(Marking and Instructions : Visibility of marking concerning covering) |
- |
2000 |
|
- |
| Cl.7.15 of IS 302-1:2008(Marking and Instructions : discernibility from the out side ) |
- |
2000 |
|
- |
| Cl.7.14 of IS:302-2:30: 2007(Marking and Instructions : Height of “Do not cover”) |
- |
2000 |
|
- |
| Cl.7.14 of IS:302-2:30: 2007(Marking and Instructions : height of symbol) |
- |
2000 |
|
- |
| Cl.7.13 of IS 302-1:2008(Marking and Instructions : Languge of instruction and texts ) |
- |
2000 |
|
- |
| Cl.7.11 of IS :302-1:2008(Marking and Instructions : Controls ) |
- |
2000 |
|
- |
| Cl.7.9 of IS :302-1:2008(Marking and Instructions : switches ) |
- |
2000 |
|
- |
| Cl.7.8 of IS :302-1:2008(Marking and Instructions : terminals ) |
- |
2000 |
|
- |
| Cl.7.6 of IS:302-1:2008(Marking and Instructions : Symbols ) |
- |
2000 |
|
- |
| Cl.7.5 of IS:302-1:2008(Marking and Instructions : upper of lower limit of the rated power input ) |
- |
2000 |
|
- |
| Cl 7.1 & Cl.7.6 of IS:302-2:30: 2007(Marking and Instructions : Do not cover ) |
- |
2000 |
|
- |
| Cl.7.1 of IS:302-1:2008(Marking and Instructions : Country of manufacture ) |
- |
2000 |
|
- |
| Cl.7.1 of IS:302-1:2008(Marking and Instructions : Symbol for Class-II ) |
- |
2000 |
|
- |
| Cl.7.1 of IS:302-1:2008(Marking and Instructions : rated power input ) |
- |
2000 |
|
- |
| Cl.7.1 of IS:302-1:2008(Marking and Instructions : Nature of supply ) |
- |
2000 |
|
- |
| Cl.7.1 of IS:302-1:2008(Marking and Instructions : Rated Voltage ) |
- |
2000 |
|
- |
|
31 Dec, 2026 |
-
Excl: Cl. 19.11.4.1 to Cl. 19.11.4.7 (EMI/EMC tests) |
| 14168 |
Northern India Textile Research Association (NITRA), Ghaziabad
| 8163504
| IS 15741 (2007) |
Textiles - Resistance to ignition of curtains and drapes - Specification |
- |
- View breakup
Rs.62000/- Plus 18% GST
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
No Record Found
|
|
- |
-
(Lab of national repute and eminence, facilities of which are being utilized by BIS.) |
| 14169 |
Northern India Textile Research Association (NITRA), Ghaziabad
| 8163504
| IS 15748 (2007) |
Textiles – Protective clothing for industrial workers exposed to heat (Excluding firefighters’ and welders’ clothing) |
- |
- View breakup
Rs.41100/- Plus 18% GST
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
No Record Found
|
|
- |
-
(Lab of national repute and eminence, facilities of which are being utilized by BIS.) |
| 14170 |
National Test House (NR) - NTH, Ghaziabad
| 8101304
| IS 1786 (2008) |
High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision) |
- |
24000 View breakup
i) Size 8-12mm: Rs.8000/- All test + Rs.10000/- for Pullout Test
ii) Size 16-28mm: Rs.9000/- All test + Rs.15000/- for Pullout Test
iii) Size 32mm: Rs.10000/- All test + Rs.15000/- for Pullout Test. [Additional fee Rs.2000/- for micro element]
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl. 5 (Cl.5 Mean area of ribs/unit length (Ar), ) |
- |
1000 |
|
- |
| Cl. 5 (Cl. 5 - Mean projected area of transverse ribs (1/3 of Ar)) |
- |
0 |
|
- |
| Cl 7.2(Weight) |
- |
1000 |
|
- |
| Cl. 8.1 Table 3(Tensile Strength (TS)) |
- |
1000 |
|
- |
| Cl. 8.1 Table 3(Yield Stress (YS)) |
- |
1000 |
|
- |
| Cl. 8.1 Table 3(Elongation, percentage) |
- |
1000 |
|
- |
| Cl. 8.1 Table 3(TS/YS ratio) |
- |
0 |
|
- |
| Cl. 9.3, Table 4(Bend Test ) |
- |
1000 |
|
- |
| Cl.9.4 & Cl. 9.4.1(Rebend test) |
- |
1000 |
|
- |
| Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 CARBON ) |
- |
500 |
|
- |
| Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR) |
- |
500 |
|
- |
| Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 PHOSPHURS) |
- |
500 |
|
- |
| Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR+PHOSPHUR) |
- |
1000 |
|
- |
| Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 CARBON +EQUIVELENT ) |
- |
1000 |
|
- |
| Cl 5(Deformations and Surface Characteristics) |
- |
15000 |
|
- |
| 4.1(Sulphur and phosphorous) |
- |
500 |
|
- |
| 4.1(CE) |
- |
1000 |
|
- |
| 4.1( Nitrogen%) |
- |
500 |
|
- |
| 4.1(Ni) |
- |
500 |
|
- |
| 4.1(Mo) |
- |
500 |
|
- |
| 4.1(Cr) |
- |
500 |
|
- |
| 4.1( Ti) |
- |
500 |
|
- |
| 4.1(V) |
- |
500 |
|
- |
| 4.1( Copper %) |
- |
500 |
|
- |
| 4.1(Silicon %) |
- |
500 |
|
- |
| 4.1(Sulphur %) |
- |
500 |
|
- |
| 4.1(Phosphorus %) |
- |
500 |
|
- |
| 4.1(Manganese %) |
- |
500 |
|
- |
| 4.1(Carbon %) |
- |
500 |
|
- |
| 4.1( Aluminium %) |
- |
500 |
|
- |
| Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 MANGANESE) |
- |
500 |
|
- |
| Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 NITROGEN) |
- |
500 |
|
- |
|
- |
-
- |
| 14171 |
MSME Testing Centre, New Delhi
| 8101204
| IS 1786 (2008) |
High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision) |
Upto 32mm |
10756 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Carbon-IS 228) |
- |
3795 |
|
- |
| Cl 5(Deformations and Surface Characteristics) |
- |
2195 |
|
- |
| Cl 7.2(Weight) |
- |
520 |
|
- |
| Cl 8.1(UTM) |
- |
1444 |
|
Tensile Test |
| Cl 9.3(Load In One Direction) |
- |
1358 |
|
Bend Test |
| Cl 9.4(Load In Other Direction From Bend) |
- |
1444 |
|
Rebend Test |
|
31 Dec, 2026 |
-
Cl 5.7 Pull out test |
| 14172 |
MSME Testing Centre, New Delhi
| 8101204
| IS 302 : Part 2 : Sec 14 (2009) |
Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 14 electric kitchen machines (First Revision) |
- |
12000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7.1(Marking- IS 302-1) |
- |
2000 |
|
- |
| 8( Protection Against Electric Shock, IS 302-1) |
- |
2500 |
|
- |
| 10(Power Input and Current, IS 302-1) |
- |
2500 |
|
- |
| 11(Heating, IS 302-1) |
- |
3000 |
|
- |
| 13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1) |
- |
4000 |
|
- |
| 14(Transient Over Voltages, IS 302-1) |
- |
2000 |
|
- |
| 15.2(Moisture Resistance, IS 302-1) |
- |
4000 |
|
- |
| 16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1) |
- |
4000 |
|
- |
| 17(Overload protection of Transformers and Associated Circuits, IS 302-1) |
- |
2000 |
|
- |
| 19.1(Abnormal Operation, IS 302-1) |
- |
2000 |
|
- |
| 21.1(Mechanical Strength, IS 302-1) |
- |
5000 |
|
- |
| 25.1(Supply Connection and External Flexible Cords, IS 302-1) |
- |
2000 |
|
- |
| 26(Terminals for External Conductors, IS 302-1) |
- |
2000 |
|
- |
| 27(Provision for Earthing, IS 302-1) |
- |
2000 |
|
- |
| 28(Screws & Connections, IS 302-1) |
- |
2000 |
|
- |
| 30.1(Resistance to Heat and Fire, IS 302-1) |
- |
4000 |
|
- |
| 31(Resistance of Rusting, IS 302-1) |
- |
2500 |
|
- |
| 20.115(Stability & Mechanical Hazards) |
- |
5000 |
|
- |
| 29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1) |
- |
2000 |
|
- |
| 22(Construction, IS 302-1) |
- |
2000 |
|
- |
| 23.1(Internal Wiring, IS 302-1) |
- |
2000 |
|
- |
| 24.1(Components, IS 302-1) |
- |
2000 |
|
- |
| 32(Radiation, Toxicity and similar Hazard IS 302-1) |
- |
2000 |
|
- |
| 6(Classification- IS 302-1 ) |
- |
1000 |
|
- |
| 6(Classification- IS 302-1) |
- |
1000 |
|
- |
| 7.1(Marking- IS 302-1) |
- |
2000 |
|
- |
| 7.1(Marking- IS 302-1) |
- |
2000 |
|
- |
| 7.1(Marking- IS 302-1) |
- |
2000 |
|
- |
| 7.1(Marking- IS 302-1) |
- |
2000 |
|
- |
| 7.1(Marking- IS 302-1) |
- |
2000 |
|
- |
| 7.1(Marking- IS 302-1) |
- |
2000 |
|
- |
| 7.1(Marking- IS 302-1) |
- |
2000 |
|
- |
| 7.3(Marking- IS 302-1) |
- |
2000 |
|
- |
| 7.4(Marking- IS 302-1) |
- |
2000 |
|
- |
| 7.6(Marking- IS 302-1) |
- |
2000 |
|
- |
| 7.7(Marking- IS 302-1) |
- |
2000 |
|
- |
| 7.8(Marking- IS 302-1) |
- |
2000 |
|
- |
| 7.11(Marking- IS 302-1) |
- |
2000 |
|
- |
| 7.12(Marking- IS 302-1) |
- |
2000 |
|
- |
| 7.13(Marking- IS 302-1) |
- |
2000 |
|
- |
| 7.14(Marking- IS 302-1) |
- |
2000 |
|
- |
| 7.15(Marking- IS 302-1) |
- |
2000 |
|
- |
| 7.101(Marking) |
- |
2000 |
|
- |
| 11(Heating, IS 302-1) |
- |
3000 |
|
- |
| 11(Heating, IS 302-1) |
- |
3000 |
|
- |
| 11(Heating, IS 302-1) |
- |
3000 |
|
- |
| 11(Heating, IS 302-1) |
- |
3000 |
|
- |
| 13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1) |
- |
4000 |
|
- |
| 15(Moisture Resistance, IS 302-1) |
- |
4500 |
|
- |
| 16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1) |
- |
4000 |
|
- |
| 17(Overload protection of Transformers and Associated Circuits, IS 302-1) |
- |
2000 |
|
- |
| 19.8(Abnormal Operation, IS 302-1) |
- |
2000 |
|
- |
| 19.9(Abnormal Operation, IS 302-1) |
- |
2000 |
|
- |
| 19.101(Abnormal Operation) |
- |
2000 |
|
- |
| 19.102(Abnormal Operation) |
- |
2000 |
|
- |
| 20.2(Stability & Mechanical Hazards, IS 302-1) |
- |
5000 |
|
- |
| 20.101(Stability & Mechanical Hazards) |
- |
5000 |
|
- |
| 20.102(Stability & Mechanical Hazards) |
- |
5000 |
|
- |
| 20.1(Stability & Mechanical Hazards, IS 302-1) |
- |
5000 |
|
- |
| 20.103(Stability & Mechanical Hazards) |
- |
5000 |
|
- |
| 20.104(Stability & Mechanical Hazards) |
- |
5000 |
|
- |
| 20.105(Stability & Mechanical Hazards) |
- |
5000 |
|
- |
| 20.106(Stability & Mechanical Hazards) |
- |
5000 |
|
- |
| 20.107(Stability & Mechanical Hazards) |
- |
5000 |
|
- |
| 20.108(Stability & Mechanical Hazards) |
- |
5000 |
|
- |
| 20.109(Stability & Mechanical Hazards) |
- |
5000 |
|
- |
| 20.110(Stability & Mechanical Hazards) |
- |
5000 |
|
- |
| 20.111(Stability & Mechanical Hazards) |
- |
5000 |
|
- |
| 20.112(Stability & Mechanical Hazards) |
- |
5000 |
|
- |
| 20.113(Stability & Mechanical Hazards) |
- |
5000 |
|
- |
| 20.114(Stability & Mechanical Hazards) |
- |
5000 |
|
- |
| 20.116(Stability & Mechanical Hazards) |
- |
5000 |
|
- |
| 21.2(Mechanical Strength, IS 302-1) |
- |
5000 |
|
- |
| 22.101(Construction) |
- |
2000 |
|
- |
| 22.102(Construction) |
- |
2000 |
|
- |
| 23.2(Internal Wiring, IS 302-1) |
- |
2000 |
|
- |
| 23.3(Internal Wiring, IS 302-1) |
- |
2000 |
|
- |
| 23.4(Internal Wiring, IS 302-1) |
- |
2000 |
|
- |
| 23.5(Internal Wiring, IS 302-1) |
- |
2000 |
|
- |
| 23.6(Internal Wiring, IS 302-1) |
- |
2000 |
|
- |
| 23.7(Internal Wiring, IS 302-1) |
- |
2000 |
|
- |
| 23.8(Internal Wiring, IS 302-1) |
- |
2000 |
|
- |
| 23.9(Internal Wiring, IS 302-1) |
- |
2000 |
|
- |
| 23.10(Internal Wiring, IS 302-1) |
- |
2000 |
|
- |
| 24.2(Components, IS 302-1) |
- |
2000 |
|
- |
| 24.5(Components, IS 302-1) |
- |
2000 |
|
- |
| 24.6(Components, IS 302-1) |
- |
2000 |
|
- |
| 25.5(Supply Connection and External Flexible Cords, IS 302-1) |
- |
2000 |
|
- |
| 25.6(Supply Connection and External Flexible Cords, IS 302-1) |
- |
2000 |
|
- |
| 25.7(Supply Connection and External Flexible Cords, IS 302-1) |
- |
2000 |
|
- |
| 25.8(Supply Connection and External Flexible Cords, IS 302-1) |
- |
2000 |
|
- |
| 25.1(Supply Connection and External Flexible Cords, IS 302-1) |
- |
2000 |
|
- |
| 25.11(Supply Connection and External Flexible Cords, IS 302-1) |
- |
2000 |
|
- |
| 25.12(Supply Connection and External Flexible Cords, IS 302-1) |
- |
2000 |
|
- |
| 25.13(Supply Connection and External Flexible Cords, IS 302-1) |
- |
2000 |
|
- |
| 25.14(Supply Connection and External Flexible Cords, IS 302-1) |
- |
2000 |
|
- |
| 25.15(Supply Connection and External Flexible Cords, IS 302-1) |
- |
2000 |
|
- |
| 25.16(Supply Connection and External Flexible Cords, IS 302-1) |
- |
2000 |
|
- |
| 25.17(Supply Connection and External Flexible Cords, IS 302-1) |
- |
2000 |
|
- |
| 25.18(Supply Connection and External Flexible Cords, IS 302-1) |
- |
2000 |
|
- |
| 25.19(Supply Connection and External Flexible Cords, IS 302-1) |
- |
2000 |
|
- |
| 25.2(Supply Connection and External Flexible Cords, IS 302-1) |
- |
2000 |
|
- |
| 25.21(Supply Connection and External Flexible Cords, IS 302-1) |
- |
2000 |
|
- |
| 25.22(Supply Connection and External Flexible Cords, IS 302-1) |
- |
2000 |
|
- |
| 27.2(Provision for Earthing, IS 302-1) |
- |
2000 |
|
- |
| 27.3(Provision for Earthing, IS 302-1) |
- |
2000 |
|
- |
| 27.4(Provision for Earthing, IS 302-1) |
- |
2000 |
|
- |
| 27.5(Provision for Earthing, IS 302-1) |
- |
2000 |
|
- |
| 29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1) |
- |
2000 |
|
- |
| 30.2(Resistance to Heat and Fire, IS 302-1) |
- |
4000 |
|
- |
|
31 Dec, 2026 |
-
Excl: Cl. 19.11.4.1 to Cl. 19.11.4.7 (EMI/EMC tests) |
| 14173 |
MSME Testing Centre, New Delhi
| 8101204
| IS 302 : Part 2 : Sec 15 (2009) |
Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 15 appliances for heating liquids (First Revision) |
0 |
12000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7(Marking and instructions) |
- |
2000 |
|
- |
| 8(Protection against live parts) |
- |
2500 |
|
- |
| 10(POWER INPUT AND CURRENT) |
- |
2500 |
|
- |
| 11(HEATING) |
- |
3000 |
|
- |
| 13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE) |
- |
4000 |
|
- |
| 14(TRANSIENT OVERVOLTAGES) |
- |
2000 |
|
- |
| 15(MOISTURE RESISTANCE) |
- |
4000 |
|
- |
| 16(LEAKAGE CURRENT AND ELECTRIC STRENGTH) |
- |
4000 |
|
- |
| 17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS) |
- |
2000 |
|
- |
| 19(ABNORMAL OPERATION) |
- |
2000 |
|
- |
| 21(MECHANICAL STRENGTH) |
- |
5000 |
|
- |
| 25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS) |
- |
2000 |
|
- |
| 26(TERMINALS FOR EXTERNAL CONDUCTORS) |
- |
2000 |
|
- |
| 27(PROVISION FOR EARTHING) |
- |
2000 |
|
- |
| 28(SCREWS AND CONNECTIONS) |
- |
2000 |
|
- |
| 30(RESISTANCE TO HEAT AND FIRE) |
- |
4000 |
|
- |
| 31(RESISTANCE TO RUSTING) |
- |
2500 |
|
- |
| 20(STABILITY AND MECHANICAL HAZARDS) |
- |
5000 |
|
- |
| 29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION) |
- |
2000 |
|
- |
|
31 Dec, 2026 |
-
Excl: Cl. 19.11.4.1 to Cl. 19.11.4.7 (EMI/EMC tests) |
| 14174 |
Northern India Textile Research Association (NITRA), Ghaziabad
| 8163504
| IS 15852 (2009) |
Textiles – Polyester blended woven shirting for uniforms |
- |
20000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1, Table 1,vi)(vi) Fibres composition, percent :
a) Polyester
b) Viscose/cotton
) |
- |
2000 |
|
- |
|
- |
-
- |
| 14175 |
Northern India Textile Research Association (NITRA), Ghaziabad
| 8163504
| IS 15853 (2009) |
Textiles – Polyester blended woven suiting for uniforms |
- |
20000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1, Table 1,vi)(vi) Fibres composition, percent :
a) Polyester
b) Viscose/cotton
) |
- |
2000 |
|
- |
|
- |
-
- |
| 14176 |
Central Coir Research Institute, Alappuzha
| 6107934
| IS 15871 (2009) |
Use of coir geotextiles (Coir BHOOVASTRA) in unpaved roads – Guidelines |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
No Record Found
|
|
- |
-
(Lab of national repute and eminence, facilities of which are being utilized by BIS.) |
| 14177 |
Central Coir Research Institute, Alappuzha
| 6107934
| IS 15872 (2009) |
Application of coir geotextiles (Coir woven BHOOVASTRA) for rain water erosion control in roads, railway embankments and hill slopes – Guidelines |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
No Record Found
|
|
- |
-
(Lab of national repute and eminence, facilities of which are being utilized by BIS.) |
| 14178 |
National Test House (NR) - NTH, Ghaziabad
| 8101304
| IS 694 (2010) |
Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 450/750 v (Fourth Revision) |
- |
20000 View breakup
For BIS samples: BIS approved testing charges-, Rs.20000/- for Single Core Cable & Rs.2000/- for each additional core
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 10.8(Smoke density rating) |
- |
3600 |
|
RUPEE 900 EXTRA FOR EACH OTHER CORE |
| 10.6(Halogen evolution) |
- |
3600 |
|
RUPEE 900 EXTRA FOR EACH OTHER CORE |
| 10.7(Temperature index) |
- |
3600 |
|
RUPEE 900 EXTRA FOR EACH OTHER CORE |
| 10.5(Oxygen index) |
- |
3600 |
|
RUPEE 900 EXTRA FOR EACH OTHER CORE |
| 11.1(Durability) |
- |
100 |
|
- |
| 11(Identification) |
- |
100 |
|
- |
| 10.9(Additional ageing test (OU cables only) -HV test (at 60±3oC)) |
- |
2000 |
|
- |
| table 1 e) 3) (IR constant- max. Temp) |
- |
500 |
|
RUPEE 50 EXTRA FOR EACH OTHER CORE |
| table 1 e) 3) (IR constant- Room temp ) |
- |
500 |
|
RUPEE 50 EXTRA FOR EACH OTHER CORE |
| table 1 e) 3) (Volume Resistivity - Maximum temp) |
- |
500 |
|
RUPEE 50 EXTRA FOR EACH OTHER CORE |
| table 1 e) 3) (Volume Resistivity - Room temp ) |
- |
500 |
|
RUPEE 50 EXTRA FOR EACH OTHER CORE |
| 10.2(HV (room temperature)) |
- |
1000 |
|
RUPEE 100 EXTRA FOR EACH OTHER CORE |
| 10.1(HV (water immersion)) |
- |
1500 |
|
RUPEE 150 EXTRA FOR EACH OTHER CORE |
| 10.1(HV (water immersion)) |
- |
1500 |
|
RUPEE 150 EXTRA FOR EACH OTHER CORE |
| 10.4(Flammability test- Unaffected portion) |
- |
250 |
|
RUPEE 25 EXTRA FOR EACH OTHER CORE |
| 10.4(Flammability test-Burning after flame removal) |
- |
250 |
|
RUPEE 25 EXTRA FOR EACH OTHER CORE |
| Table 1(Category Code) |
- |
100 |
|
- |
| Table 1 iii) d) 7)(Thermal stability- Sheath ) |
- |
500 |
|
RUPEE 50 EXTRA FOR EACH OTHER CORE |
| Table 1 iii) c) 7)(Thermal stability- Insulation ) |
- |
500 |
|
RUPEE 50 EXTRA FOR EACH OTHER CORE |
| Table 1 iii) d) 6)(Hot deformation -Indentation depth - Sheath ) |
- |
500 |
|
RUPEE 50 EXTRA FOR EACH OTHER CORE |
| Table 1 iii) d) 5)(Heat shock-Sheath ) |
- |
500 |
|
RUPEE 50 EXTRA FOR EACH OTHER CORE |
| Table 1 iii) d) 4)(Cracks Observed) |
- |
250 |
|
RUPEE 25 EXTRA FOR EACH OTHER CORE |
| Table 1 iii) d) 4)(Shrinkage- Sheath ) |
- |
250 |
|
RUPEE 25 EXTRA FOR EACH OTHER CORE |
| Table 1 iii) d) 2)(Loss of mass- Sheath ) |
- |
750 |
|
RUPEE 75 EXTRA FOR EACH OTHER CORE |
| Table 1 iii) c) 2)(Loss of mass- Insulation ) |
- |
750 |
|
RUPEE 75 EXTRA FOR EACH OTHER CORE |
| Table 1 iii) d) 3)(Sheath- Elongation variation) |
- |
250 |
|
RUPEE 25 EXTRA FOR EACH OTHER CORE |
| Table 1 iii) d) 3)(Sheath- TS variation) |
- |
250 |
|
RUPEE 25 EXTRA FOR EACH OTHER CORE |
| Table 1 iii) d) 3)(Sheath- Elongation (After ageing)) |
- |
250 |
|
RUPEE 25 EXTRA FOR EACH OTHER CORE |
| Table 1 iii) d) 3)(Sheath- Tensile strength (After ageing)) |
- |
250 |
|
RUPEE 25 EXTRA FOR EACH OTHER CORE |
| Table 1 iii) d) 1)(Sheath- Elongation (Without ageing)) |
- |
375 |
|
RUPEE 37.5 EXTRA FOR EACH OTHER CORE |
| Table 1 iii) d) 1)(Sheath -Tensile strength (Without ageing)) |
- |
375 |
|
RUPEE 37.5 EXTRA FOR EACH OTHER CORE |
| Table 1 iii) c) 3)(Elongation variation) |
- |
250 |
|
RUPEE 25 EXTRA FOR EACH OTHER CORE |
| Table 1 iii) c) 3)(TS variation) |
- |
250 |
|
RUPEE 25 EXTRA FOR EACH OTHER CORE |
| Table 1 iii) c) 3)(Elongation (After ageing)) |
- |
250 |
|
RUPEE 25 EXTRA FOR EACH OTHER CORE |
| Table 1 iii) c) 3)(Tensile strength (After ageing)) |
- |
250 |
|
RUPEE 25 EXTRA FOR EACH OTHER CORE |
| Table 1 iii) c) 1)(Elongation (Without ageing)) |
- |
375 |
|
RUPEE 37.5 EXTRA FOR EACH OTHER CORE |
| Table 1 iii) c) 1)(Tensile strength (Without ageing)) |
- |
375 |
|
RUPEE 37.5 EXTRA FOR EACH OTHER CORE |
| (Cl. 18.1.4)
(Cl. 19.1.5)
(Cl. 20.1.4)
(Cl. 22.1.4)(Colour of Sheath) |
- |
10 |
|
- |
| 8.3(Thickness of Sheath) |
- |
125 |
|
RUPEE 12.5 EXTRA FOR EACH OTHER CORE |
| 5.2(Application ) |
- |
100 |
|
- |
| 5.3(Thickness of Insulation) |
- |
125 |
|
RUPEE 12.5 EXTRA FOR EACH OTHER CORE |
| 9.1(Ovality) |
- |
125 |
|
RUPEE 12.5 EXTRA FOR EACH OTHER CORE |
| 9(Overall dimensions) |
- |
125 |
|
RUPEE 12.5 EXTRA FOR EACH OTHER CORE |
| 4.2(Conductor resistance test) |
- |
1500 |
|
RUPEE 150 EXTRA FOR EACH OTHER CORE |
| 4.1(Wrapping test (for Al)) |
- |
500 |
|
RUPEE 50 EXTRA FOR EACH OTHER CORE |
| 4.1(Tensile test (for Al)- After Stranding) |
- |
1000 |
|
RUPEE 100 EXTRA FOR EACH OTHER CORE |
| 4.1(Tensile test (for Al)-Before Stranding) |
- |
300 |
|
RUPEE 30 EXTRA FOR EACH OTHER CORE |
| 4.1(Annealing test (for copper)) |
- |
1000 |
|
RUPEE 100 EXTRA FOR EACH OTHER CORE |
| (Cl.6.1.3 of IS 8130:2013)(Flexible Conductors (Classes 5)) |
- |
100 |
|
- |
| (Cl.6.1.3 of IS 8130:2013)( Flexible Conductors (Classes 5)) |
- |
100 |
|
- |
| (Cl.6.1.3 of IS 8130:2013)(Stranded circular non compacted conductors(Class-2)) |
- |
100 |
|
- |
| (Cl.6.1.3 of IS 8130:2013)(Stranded compacted circular conductors and shaped conductors (Class 2)) |
- |
100 |
|
- |
| (Cl.6.1.3 of IS 8130:2013)(Stranded circular non compacted conductors (Class-2)) |
- |
100 |
|
- |
| (Cl.6.1.3 of IS 8130:2013)(Stranded circular non compacted conductors (Class-2)) |
- |
100 |
|
- |
| (Cl.6.1.3 of IS 8130:2013)(Solid Conductor (Class 1)) |
- |
100 |
|
- |
| (Cl.6.1 of IS 8130:2013)(Solid Conductor (Class 1)) |
- |
100 |
|
- |
| (Cl.6.1 of IS 8130:2013)(Solid Conductor (Class 1)) |
- |
100 |
|
- |
| (Cl.16.1)
(Cl.19.1)(Conductor- Diameter ) |
- |
100 |
|
- |
| (Cl.16.1)
(Cl.19.1)(Conductor) |
- |
100 |
|
- |
| (Cl.16.1)
(Cl.19.1)(Conductor) |
- |
100 |
|
- |
| (Cl.16.1)
(Cl.19.1)(Conductor) |
- |
100 |
|
- |
| (Cl. 18.1.3)
(Cl. 19.1.4)
(Cl. 20.1.3)
(Cl. 21.1.3)
(Cl. 22.1.3)(Assembly of cores ) |
- |
100 |
|
- |
| 12(CONSTRUCTION Core Identification) |
- |
100 |
|
- |
| 8.1(Sheath Material ) |
- |
100 |
|
- |
| 7(Binder Tape) |
- |
100 |
|
- |
| 6.2(Filler) |
- |
100 |
|
- |
| 5.1(Insulation) |
- |
100 |
|
- |
| 4.4(Joints in Conductor) |
- |
100 |
|
- |
| 4.4(Joints in Conductor) |
- |
100 |
|
- |
| 4.1(Conductor - Material) |
- |
100 |
|
- |
| 4.1(Conductor - Material) |
- |
100 |
|
- |
| 10.11(Persulphate Test ) |
- |
500 |
|
RUPEE 50 EXTRA FOR EACH OTHER CORE |
| 12.0(Core identification) |
- |
100 |
|
- |
| 4, IS 8130(Construction of conductor) |
- |
100 |
|
- |
| Table 2, IS 8130(No fo wire in a conductor) |
- |
100 |
|
- |
| 8.3(Minimum thickness of Sheath) |
- |
125 |
|
RUPEE 12.5 EXTRA FOR EACH OTHER CORE |
| 8.3(Avarage thickness of Sheath) |
- |
125 |
|
RUPEE 12.5 EXTRA FOR EACH OTHER CORE |
| 5.3(Minimum thickness of insulation) |
- |
125 |
|
RUPEE 12.5 EXTRA FOR EACH OTHER CORE |
| 5.3(Avarage thickness of insulation) |
- |
125 |
|
RUPEE 12.5 EXTRA FOR EACH OTHER CORE |
| Table 4(Copper purity test) |
- |
500 |
|
- |
| 10.3(Spark test) |
- |
0 |
|
- |
| table 1, 4.2(insulation resistance test) |
- |
100 |
|
RUPEE 10 EXTRA FOR EACH OTHER CORE |
| 5.4(Mechanical properties before and after ageing) |
- |
100 |
|
RUPEE 10 EXTRA FOR EACH OTHER CORE |
| 10.11(Per sulphate test (for tinned Cu cable only)) |
- |
100 |
|
RUPEE 10 EXTRA FOR EACH OTHER CORE |
|
- |
-
- |
| 14179 |
Central Power Research Institute (CPRI), Bangalore
| 6101024
| IS 694 (2010) |
Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 450/750 v (Fourth Revision) |
Single to five core cables/Un-sheathed/Sheathed/FRLS |
336500 View breakup
1 Core PVC Insulated Cable Rs. 74890 /- + 18 % GST
1 Core FR PVC Insulated Cable Rs. 102760 /- + 18 % GST
1 Core FR-LSH PVC Insulated Cable Rs. 125660 /- + 18 % GST
1 Core PVC Insulated & Sheathed Cable Rs. 106800 /- + 18 % GST
1 Core PVC Insulated & FR PVC Sheathed Cable Rs. 134680 /- + 18 % GST
1 Core PVC Insulated & FR - LSH PVC Sheathed Cable Rs. 157550 /- + 18 % GST
2 Core PVC Insulated & Sheathed Cable Rs. 146180 /- + 18 % GST
2 Core PVC Insulated & FR PVC Sheathed Cable Rs. 174060 /- + 18 % GST
2 Core PVC Insulated & FR-LSH PVC Sheathed Cable Rs. 196960 /- + 18 % GST
3 Core PVC Insulated & Sheathed Cable Rs. 185740 /- + 18 % GST
3 Core PVC Insulated & FR-LSH PVC Sheathed Cable Rs. 213620 /- + 18 % GST
3 Core PVC Insulated & FR-LSH PVC Sheathed Cable Rs. 236520 /- + 18 % GST
4 Core PVC Insulated sheathed armoured Cable Rs. 228620 /- + 18 % GST
4 Core PVC Insulated & FR PVC Sheathed armoured Cable Rs. 256530 /- + 18 % GST
4 Core PVC Insulated & FR - LSH PVC Sheathed armoured Cable Rs. 279400 /- + 18 % GST
5 Core PVC Insulated sheathed armoured Cable Rs. 266800 /- + 18 % GST
5 Core PVC Insulated & FR PVC Sheathed armoured Cable Rs. 294710 /- + 18 % GST
5 Core PVC Insulated & FR - LSH PVC Sheathed armoured Cable Rs. 317580 /- + 18 % GST
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1(Annealing test (for copper)) |
- |
1450 |
|
The test charges indicated is applicable for one core and if the number of cores are more proportionally the charges will increase.
The complete test charges applicable, will be intimated through proforma invoice. |
| 4.1(Tensile test (for Al)-Before Stranding) |
- |
5300 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 4.1(Tensile test (for Al)- After Stranding) |
- |
5300 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 4.1(Wrapping test (for Al)) |
- |
500 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 4.2(Conductor resistance test) |
- |
2300 |
|
The test charges indicated is applicable for one core and if the number of cores are more proportionally the charges will increase.
The complete test charges applicable, will be intimated through proforma invoice. |
| 4.1(Conductor - Material) |
- |
0 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| Table 2, IS 8130(No fo wire in a conductor) |
- |
0 |
|
- |
| 4, IS 8130(Construction of conductor) |
- |
0 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 9(Overall dimensions) |
- |
500 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 5.3(Thickness of Insulation) |
- |
500 |
|
The test charges indicated is applicable for one core and if the number of cores are more proportionally the charges will increase.
The complete test charges applicable, will be intimated through proforma invoice. |
| 5.3(Minimum thickness of insulation) |
- |
0 |
|
- |
| 5.3(Avarage thickness of insulation) |
- |
0 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| Table 1 iii) c) 1)(Tensile strength (Without ageing)) |
- |
2650 |
|
The test charges indicated is applicable for one core and if the number of cores are more proportionally the charges will increase.
The complete test charges applicable, will be intimated through proforma invoice. |
| Table 1 iii) c) 3)(Tensile strength (After ageing)) |
- |
2650 |
|
The test charges indicated is applicable for one core and if the number of cores are more proportionally the charges will increase.
The complete test charges applicable, will be intimated through proforma invoice. |
| Table 1 iii) c) 3)(TS variation) |
- |
5300 |
|
Ageing charges quoted is for all the insulation.
The complete test charges applicable, will be intimated through proforma invoice. |
| Table 1 iii) c) 1)(Elongation (Without ageing)) |
- |
2650 |
|
The test charges indicated is applicable for one core and if the number of cores are more proportionally the charges will increase |
| Table 1 iii) c) 3)(Elongation (After ageing)) |
- |
2650 |
|
The test charges indicated is applicable for one core and if the number of cores are more proportionally the charges will increase.
The complete test charges applicable, will be intimated through proforma invoice. |
| Table 1 iii) c) 3)(Elongation variation) |
- |
0 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| Table 1 iii) c) 2)(Loss of mass- Insulation ) |
- |
5300 |
|
The test charges indicated is applicable for one core and if the number of cores are more proportionally the charges will increase.
The complete test charges applicable, will be intimated through proforma invoice. |
| Table 1 iii) c) 4)(Shrinkage-Insulation) |
- |
1000 |
|
The test charges indicated is applicable for one core and if the number of cores are more proportionally the charges will increase.
The complete test charges applicable, will be intimated through proforma invoice. |
| Table 1 iii) c) 5)(Heat shock-Insulation ) |
- |
1000 |
|
The test charges indicated is applicable for one core and if the number of cores are more proportionally the charges will increase.
The complete test charges applicable, will be intimated through proforma invoice. |
| Table 1 iii) c) 6)(Hot deformation - Indentation depth- Insulation) |
- |
2200 |
|
The test charges indicated is applicable for one core and if the number of cores are more proportionally the charges will increase.
The complete test charges applicable, will be intimated through proforma invoice. |
| Table 1 iii) c) 7)(Thermal stability- Insulation ) |
- |
3000 |
|
The test charges indicated is applicable for one core and if the number of cores are more proportionally the charges will increase.
The complete test charges applicable, will be intimated through proforma invoice. |
| Table 1 iii) c) 8)(Cold bend for insulation) |
- |
12100 |
|
The test charges indicated is applicable for one core and if the number of cores are more proportionally the charges will increase.
The complete test charges applicable, will be intimated through proforma invoice. |
| Table 1 iii) c) 9)(Cold impact for insulation) |
- |
7600 |
|
The test charges indicated is applicable for one core and if the number of cores are more proportionally the charges will increase.
The complete test charges applicable, will be intimated through proforma invoice. |
| (Cl. 18.1.4)
(Cl. 19.1.5)
(Cl. 20.1.4)
(Cl. 22.1.4)(Colour of Sheath) |
- |
0 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| Table 1 iii) d) 1)(Sheath -Tensile strength (Without ageing)) |
- |
2650 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| Table 1 iii) d) 3)(Sheath- Tensile strength (After ageing)) |
- |
2650 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| Table 1 iii) d) 3)(Sheath- TS variation) |
- |
5300 |
|
Ageing charges for sheath.
The complete test charges applicable, will be intimated through proforma invoice. |
| Table 1 iii) d) 1)(Sheath- Elongation (Without ageing)) |
- |
2650 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| Table 1 iii) d) 3)(Sheath- Elongation (After ageing)) |
- |
2650 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| Table 1 iii) d) 3)(Sheath- Elongation variation) |
- |
0 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| Table 1 iii) d) 2)(Loss of mass- Sheath ) |
- |
5300 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| Table 1 iii) d) 4)(Shrinkage- Sheath ) |
- |
1000 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| Table 1 iii) d) 4)(Cracks Observed) |
- |
0 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| Table 1 iii) d) 5)(Heat shock-Sheath ) |
- |
1000 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| Table 1 iii) d) 6)(Hot deformation -Indentation depth - Sheath ) |
- |
2200 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| Table 1 iii) d) 7)(Thermal stability- Sheath ) |
- |
3000 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| Table 1 iii) d) 8)(Cold bend for sheath) |
- |
12100 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| Table 1 iii) d) 9)(Cold impact for sheath) |
- |
7600 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 10.5(Oxygen index) |
- |
10300 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 10.7(Temperature index) |
- |
11700 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 10.6(Halogen evolution) |
- |
10300 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 10.8(Smoke density rating) |
- |
14550 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 8.3(Thickness of Sheath) |
- |
500 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 9.1(Ovality) |
- |
0 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 10.1(HV (water immersion)) |
- |
12450 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 10.2(HV (room temperature)) |
- |
1300 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| table 1 e) 3) (IR constant- max. Temp) |
- |
1600 |
|
The test charges indicated is applicable for one core and if the number of cores are more proportionally the charges will increase.
The complete test charges applicable, will be intimated through proforma invoice. |
| table 1 e) 3) (IR constant- Room temp ) |
- |
1100 |
|
The test charges indicated is applicable for one core and if the number of cores are more proportionally the charges will increase.
The complete test charges applicable, will be intimated through proforma invoice. |
| table 1 e) 3) (Volume Resistivity - Maximum temp) |
- |
0 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| table 1 e) 3) (Volume Resistivity - Room temp ) |
- |
0 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 10.4(Flammability test- Unaffected portion) |
- |
1600 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 10.4(Flammability test-Burning after flame removal) |
- |
0 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 10.9(Additional ageing test (OU cables only) -HV test (at 60±3oC)) |
- |
53350 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 10.11(Per sulphate test (for tinned Cu cable only)) |
- |
2500 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 13(Cable code) |
- |
0 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 11.2(Legibility) |
- |
0 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 11.1(Durability) |
- |
0 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 11(Identification) |
- |
0 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
|
31 Dec, 2026 |
-
- |
| 14180 |
Central Institute of Hand tools, Jalandhar
| 9164435
| IS 1879 (2010) |
Malleable cast iron pipe fittings - Specification (Third Revision) |
- |
4600 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 12(Compression Test) |
- |
500 |
|
- |
| 8.2(Alignment of threads -IS 554) |
- |
300 |
|
- |
| 6.1(Tensile Strength - IS 14329) |
- |
600 |
|
- |
| 6.1(Elongation - Is 14329) |
- |
300 |
|
- |
| 7.1 - Table 4 to Table 27(a - IS 1879) |
- |
300 |
|
- |
| 7.2- Table 2(Wall thickness of fittings - IS 1879) |
- |
300 |
|
- |
| 11(Pressure Test) |
- |
800 |
|
- |
| 8.1(Thread -IS 554) |
- |
300 |
|
- |
| 10.i)(Mass of Galvanized coating) |
- |
500 |
|
- |
| 10.ii) (chem)(Uniformity of Galvanized coating-IS 2633) |
- |
500 |
|
- |
| 9(Freedom from defects
) |
- |
200 |
|
- |
| 10.iii)(Adhesion of Galvanized coating IS 2629) |
- |
500 |
|
- |
| 10.i) (chem)(Mass of Galvanized coating) |
- |
500 |
|
- |
|
- |
-
- |
| 14181 |
Central Power Research Institute (CPRI), Bangalore
| 6101024
| IS 12762 : Part 1 (2010) |
Photovoltaic devices: Part 1 measurement of photovoltaic current - Voltage characteristics (First Revision) |
SOLAR PHOTOVOLTAIC MODULE |
5000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3(General measurement requirements) |
- |
0 |
|
The complete test charges will be provided at the time of issuing the proforma invoice.
The test charges are applicable to all Solar PV Modules for IV curve test (per module per curve) up to the size of 2.5m X 1.5m. |
| 4(Apparatus) |
- |
0 |
|
The complete test charges will be provided at the time of issuing the proforma invoice.
The test charges are applicable to all Solar PV Modules for IV curve test (per module per curve) up to the size of 2.5m X 1.5m. |
| 5(Measurement in natural sunlight) |
- |
0 |
|
The complete test charges will be provided at the time of issuing the proforma invoice.
The test charges are applicable to all Solar PV Modules for IV curve test (per module per curve) up to the size of 2.5m X 1.5m. |
| 6(Measurement in steady-state simulated sunlight) |
- |
0 |
|
The complete test charges will be provided at the time of issuing the proforma invoice.
The test charges are applicable to all Solar PV Modules for IV curve test (per module per curve) up to the size of 2.5m X 1.5m. |
| 7(Measurement in pulsed simulated sunlight) |
- |
0 |
|
The complete test charges will be provided at the time of issuing the proforma invoice.
The test charges are applicable to all Solar PV Modules for IV curve test (per module per curve) up to the size of 2.5m X 1.5m. |
| 8(Test report) |
- |
0 |
|
The complete test charges will be provided at the time of issuing the proforma invoice.
The test charges are applicable to all Solar PV Modules for IV curve test (per module per curve) up to the size of 2.5m X 1.5m. |
|
31 Dec, 2026 |
-
ISS included w.e.f. 23/7/2018 |
| 14182 |
National Institute of Solar Energy, Gurugram
| 9140024
| IS 14286 (2010) |
Crystalline silicon terrestrial photovoltaic (PV) modules - Design qualification and type approval (First Revision) |
- |
- View breakup
Rs.11,20,000/-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
No Record Found
|
|
- |
-
(Lab of national repute and eminence, facilities of which are being utilized by BIS.) |
| 14183 |
National Test House (NR) - NTH, Ghaziabad
| 8101304
| IS 2062 (2011) |
Hot rolled medium and high tensile structural steel - Specification (Seventh Revision) |
- |
8292 View breakup
For BIS samples: Rs.8292/-, For others: Rs.10500/-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 15(Length, Width & Thickness) |
- |
1000 |
|
- |
| Cl 18(Weight) |
- |
1000 |
|
- |
| Cl. 10.3 (Cl. 10.3 (Tensile Strength)) |
- |
1000 |
|
- |
| Cl 11.3(Press) |
- |
1000 |
|
- |
| Cl 7(Workmanship) |
- |
1000 |
|
- |
| Cl. 10.3 (Cl. 10.3 (Yield Stress)) |
- |
1000 |
|
- |
| Cl. 10.3 (Cl. 10.3 (Elongation %)) |
- |
1000 |
|
- |
| Cl 12(Sudden Load Applied) |
- |
5000 |
|
- |
| Clause - 5, 8.1 & 8.2(E650, CARBON +EQUIVELENT ) |
- |
1000 |
|
- |
| Clause - 5, 8.1 & 8.2(E650, ALUMINIUM) |
- |
500 |
|
- |
| Clause - 5, 8.1 & 8.2(E650, SILICON) |
- |
500 |
|
- |
| Clause - 5, 8.1 & 8.2(E650, NITROGEN) |
- |
500 |
|
- |
| Clause - 5, 8.1 & 8.2(E650 ,MANGANESE) |
- |
500 |
|
- |
| Clause - 5, 8.1 & 8.2(E650, PHOSPHURS) |
- |
500 |
|
- |
| Clause - 5, 8.1 & 8.2(E650, SULPHUR) |
- |
500 |
|
- |
| Clause - 5, 8.1 & 8.2(E650, CARBON) |
- |
500 |
|
- |
| Clause - 5, 8.1 & 8.2(E600, CARBON +EQUIVELENT ) |
- |
1000 |
|
- |
| Clause - 5, 8.1 & 8.2(E600, ALUMINIUM) |
- |
500 |
|
- |
| Clause - 5, 8.1 & 8.2(E600, SILICON) |
- |
500 |
|
- |
| Clause - 5, 8.1 & 8.2(E600, NITROGEN) |
- |
500 |
|
- |
| Clause - 5, 8.1 & 8.2(E600 ,MANGANESE) |
- |
500 |
|
- |
| Clause - 5, 8.1 & 8.2(E600, PHOSPHURS) |
- |
500 |
|
- |
| Clause - 5, 8.1 & 8.2(E600, SULPHUR) |
- |
500 |
|
- |
| Clause - 5, 8.1 & 8.2(E600, CARBON) |
- |
500 |
|
- |
| Clause - 5, 8.1 & 8.2(E550, CARBON +EQUIVELENT ) |
- |
1000 |
|
- |
| Clause - 5, 8.1 & 8.2(E550, ALUMINIUM) |
- |
500 |
|
- |
| Clause - 5, 8.1 & 8.2(E550, SILICON) |
- |
500 |
|
- |
| Clause - 5, 8.1 & 8.2(E550, NITROGEN) |
- |
500 |
|
- |
| Clause - 5, 8.1 & 8.2(E550 ,MANGANESE) |
- |
500 |
|
- |
| Clause - 5, 8.1 & 8.2(E550, PHOSPHURS) |
- |
500 |
|
- |
| Clause - 5, 8.1 & 8.2(E550, SULPHUR) |
- |
500 |
|
- |
| Clause - 5, 8.1 & 8.2(E550, CARBON) |
- |
500 |
|
- |
| Clause - 5, 8.1 & 8.2(E450, CARBON +EQUIVELENT ) |
- |
1000 |
|
- |
| Clause - 5, 8.1 & 8.2(E450, ALUMINIUM) |
- |
500 |
|
- |
| Clause - 5, 8.1 & 8.2(E450, SILICON) |
- |
500 |
|
- |
| Clause - 5, 8.1 & 8.2(E450, NITROGEN) |
- |
500 |
|
- |
| Clause - 5, 8.1 & 8.2(E450 ,MANGANESE) |
- |
500 |
|
- |
| Clause - 5, 8.1 & 8.2(E450, PHOSPHURS) |
- |
500 |
|
- |
| Clause - 5, 8.1 & 8.2(E450, SULPHUR) |
- |
500 |
|
- |
| Clause - 5, 8.1 & 8.2(E450, CARBON) |
- |
500 |
|
- |
| Clause - 5, 8.1 & 8.2(E410, CARBON +EQUIVELENT ) |
- |
1000 |
|
- |
| Clause - 5, 8.1 & 8.2(E410, ALUMINIUM) |
- |
500 |
|
- |
| Clause - 5, 8.1 & 8.2(E410, SILICON) |
- |
500 |
|
- |
| Clause - 5, 8.1 & 8.2(E410, NITROGEN) |
- |
500 |
|
- |
| Clause - 5, 8.1 & 8.2(E410 ,MANGANESE) |
- |
500 |
|
- |
| Clause - 5, 8.1 & 8.2(E410, PHOSPHURS) |
- |
500 |
|
- |
| Clause - 5, 8.1 & 8.2(E410, SULPHUR) |
- |
500 |
|
- |
| Clause - 5, 8.1 & 8.2(E410, CARBON) |
- |
500 |
|
- |
| Clause - 5, 8.1 & 8.2(E350, CARBON +EQUIVELENT ) |
- |
1000 |
|
- |
| Clause - 5, 8.1 & 8.2(E350, ALUMINIUM) |
- |
500 |
|
- |
| Clause - 5, 8.1 & 8.2(E350, SILICON) |
- |
500 |
|
- |
| Clause - 5, 8.1 & 8.2(E350, NITROGEN) |
- |
500 |
|
- |
| Clause - 5, 8.1 & 8.2(E350 ,MANGANESE) |
- |
500 |
|
- |
| Clause - 5, 8.1 & 8.2(E350, PHOSPHURS) |
- |
500 |
|
- |
| Clause - 5, 8.1 & 8.2(E350, SULPHUR) |
- |
500 |
|
- |
| Clause - 5, 8.1 & 8.2(E350, CARBON) |
- |
500 |
|
- |
| Clause - 5, 8.1 & 8.2(E300, CARBON +EQUIVELENT ) |
- |
1000 |
|
- |
| Clause - 5, 8.1 & 8.2(E300, ALUMINIUM) |
- |
500 |
|
- |
| Clause - 5, 8.1 & 8.2(E300, SILICON) |
- |
500 |
|
- |
| Clause - 5, 8.1 & 8.2(E300, NITROGEN) |
- |
500 |
|
- |
| Clause - 5, 8.1 & 8.2(E300 ,MANGANESE) |
- |
500 |
|
- |
| Clause - 5, 8.1 & 8.2(E300, PHOSPHURS) |
- |
500 |
|
- |
| Clause - 5, 8.1 & 8.2(E300, SULPHUR) |
- |
500 |
|
- |
| Clause - 5, 8.1 & 8.2(E300, CARBON) |
- |
500 |
|
- |
| Clause - 5, 8.1 & 8.2(E275, CARBON +EQUIVELENT ) |
- |
1000 |
|
- |
| Clause - 5, 8.1 & 8.2(E275, ALUMINIUM) |
- |
500 |
|
- |
| Clause - 5, 8.1 & 8.2(E275, SILICON) |
- |
500 |
|
- |
| Clause - 5, 8.1 & 8.2(E275, NITROGEN) |
- |
500 |
|
- |
| Clause - 5, 8.1 & 8.2(E275 ,MANGANESE) |
- |
500 |
|
- |
| Clause - 5, 8.1 & 8.2(E275, PHOSPHURS) |
- |
500 |
|
- |
| Clause - 5, 8.1 & 8.2(E275, SULPHUR) |
- |
500 |
|
- |
| Clause - 5, 8.1 & 8.2(E275, CARBON) |
- |
500 |
|
- |
| Clause - 5, 8.1 & 8.2(E250, CARBON +EQUIVELENT ) |
- |
1000 |
|
- |
| Clause - 5, 8.1 & 8.2(E250, ALUMINIUM) |
- |
500 |
|
- |
| Clause - 5, 8.1 & 8.2(E250, SILICON) |
- |
500 |
|
- |
| Clause - 5, 8.1 & 8.2(E250, NITROGEN) |
- |
500 |
|
- |
| Clause - 5, 8.1 & 8.2(E250 ,MANGANESE) |
- |
500 |
|
- |
| Clause - 5, 8.1 & 8.2(E250, PHOSPHURS) |
- |
500 |
|
- |
| Clause - 5, 8.1 & 8.2(E250, SULPHUR) |
- |
500 |
|
- |
| Clause - 5, 8.1 & 8.2(E250, CARBON) |
- |
500 |
|
- |
|
- |
-
Except for grade E 250 C material of thickness above 12mm |
| 14184 |
Central Power Research Institute (CPRI), Bangalore
| 6101024
| IS 7098 : Part 2 (2011) |
Crosslinked polyethylene insulated thermoplastic sheathed cables - Specification: Part 2 for working voltages from 3.3 kV up to and including 33 kV (Second Revision) |
- |
544000 View breakup
1 Core XLPE Insulated & PVC Sheathed armoured cable (Excluding Strippability & Longitudinal Water Penetration Tests) Rs. 234550 /- + 18 % GST 1 Core XLPE Insulated & FR PVC Sheathed armoured cable (Excluding Strippability & Longitudinal Water Penetration tests) Rs. 307040 /- + 18 % GST
1 Core XLPE Insulated & FR - LSH PVC Sheathed armoured cable (Excluding Strippability & Longitudinal Water Penetration tests) Rs. 329950 /- + 18 % GST
1 Core XLPE Insulated & PE Sheathed armoured Cable (Excluding Strippability & Longitudinal Water Penetration tests) Rs.230360 /- + 18 % GST
3 Core XLPE Insulated & PVC Sheathed armoured cable (Excluding Strippability & Longitudinal Water Penetration tests) Rs. 479270 /- + 18 % GST
3 Core XLPE Insulated & FR PVC Sheathed armoured cable (Excluding Strippability & Longitudinal Water Penetration tests) Rs. 557980 /- + 18 % GST
3 Core XLPE insulated & FR-LSH, PVC Sheathed armoured Cable (Excluding Strippability and Longitudinal Water Penetration tests) Rs. 574670 /- + 18 % GST
3 Core XLPE insulated & FR-LSH, PE Sheathed armoured Cable (Excluding Strippability & Longitudinal Water Penetration tests) Rs. 472420 /- + 18 % GST
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1(CONDUCTOR) |
- |
0 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 4.1.1(CONDUCTOR) |
- |
0 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 5(INSULATION) |
- |
0 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 6(SCREENING) |
- |
0 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 6.1.1(SCREENING : - Non-metallic — Semiconducting Compound) |
- |
0 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 6.1.2(SCREENING : - Non-magnetic Metallic Tape for Single Core Unscreened and Unarmoured Cables) |
- |
0 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 7(FILLERS AND INNER SHEATH) |
- |
0 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 8.1(ARMOURING) |
- |
0 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 8.2(ARMOURING) |
- |
0 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 9(OUTER SHEATH ) |
- |
0 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 10.1(CONDUCTOR) |
- |
0 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 10.2(CONDUCTOR) |
- |
0 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 11(CONDUCTOR SCREENING) |
- |
0 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 12.1(INSULATION) |
- |
0 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 12.2(INSULATION : Thickness of Insulation) |
- |
2300 |
|
The test charges is applicable for one core and if the number core increases, test charges will also increase proportionally.
The complete test charges applicable, will be intimated through proforma invoice. |
| 12.3(INSULATION : Tolerance on Thickness of Insulation) |
- |
0 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 12.4(Eccentricity and Ovality) |
- |
2300 |
|
The test charges is applicable for one core and if the number core increases, test charges will also increase proportionally.
The complete test charges applicable, will be intimated through proforma invoice. |
| 12.5(INSULATION : Application of Insulation) |
- |
0 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 13.1(INSULATION SCREENING) |
- |
0 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 13.2(INSULATION SCREENING) |
- |
0 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 13.3(INSULATION SCREENING) |
- |
0 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 13.4(INSULATION SCREENING) |
- |
0 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 14.1(CORE IDENTIFICATION) |
- |
0 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 14.1.1(CORE IDENTIFICATION) |
- |
0 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 15.1(LAVING UP OF CORES) |
- |
0 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 16.1(INNER SHEATH (COMMON COVERING)) |
- |
0 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 16.2(INNER SHEATH (COMMON COVERING)) |
- |
0 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 16.3(INNER SHEATH (COMMON COVERING) : Thickness of Inner Sheath) |
- |
0 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 16.3.1(INNER SHEATH (COMMON COVERING) : Thickness of Inner Sheath) |
- |
0 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 17.1(ARMOURING : Application ) |
- |
0 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 17.1.1(ARMOURING ) |
- |
0 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 17.1.2(ARMOURING ) |
- |
0 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 17.1.3(ARMOURING ) |
- |
0 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 17.2(ARMOURING : Type of armour ) |
- |
0 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 17.2.1(ARMOURING : Type of armour ) |
- |
0 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 17.2(ARMOURING : Coverage ) |
- |
0 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 17.3(ARMOURING : Dimension ) |
- |
18450 |
|
Quoted charges applicable for the complete armour testing.
The complete test charges applicable, will be intimated through proforma invoice. |
| 17.4(ARMOURING : Joints) |
- |
0 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 16.4(ARMOURING : Resistance) |
- |
2300 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 18.1(OUTER SHEATH) |
- |
0 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 18.2(OUTER SHEATH: Colour) |
- |
0 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 18.3(Thicknes of outer sheath : average ) |
- |
2300 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 18.3(Thicknes of outer sheath : minimum ) |
- |
0 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 19.1 i) a)(Annealing test (for copper)) |
- |
1450 |
|
The test charges is applicable for one core and if the number core increases, test charges will also increase proportionally.
The complete test charges applicable, will be intimated through proforma invoice. |
| 19.1 i) b)(Tensile test (for aluminium) - Before stranding ) |
- |
5300 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 19.1 i) b)(Tensile test (for aluminium) - After stranding ) |
- |
5300 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 19.1 i) c)(Wrapping test ( for aluminium)) |
- |
500 |
|
The test charges is applicable for one core and if the number core increases, test charges will also increase proportionally.
The complete test charges applicable, will be intimated through proforma invoice. |
| 19.1 i) d)(Resistance test - Main conductor ) |
- |
2300 |
|
The test charges is applicable for one core and if the number core increases, test charges will also increase proportionally.
The complete test charges applicable, will be intimated through proforma invoice. |
| 19.1 i) d)(Resistance test - Neutral conductor ) |
- |
2300 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 19.1 iii) a)(Phyaical tests for insulation : Tensile Test) |
- |
3100 |
|
The test charges is applicable for one core and if the number core increases, test charges will also increase proportionally.
The complete test charges applicable, will be intimated through proforma invoice. |
| 19.1 iii) a)(Phyaical tests for insulation : Elongation ) |
- |
3100 |
|
The test charges is applicable for one core and if the number core increases, test charges will also increase proportionally.
The complete test charges applicable, will be intimated through proforma invoice. |
| 19.1 iii) b)(Phyaical tests for insulation - Ageing in air Oven : Tensile Variation ) |
- |
5300 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 19.1 iii) b)(Phyaical tests for insulation- Ageing in air oven : Elongation Variation ) |
- |
0 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 19.1 iii) c)(Degree of cross linking ) |
- |
2300 |
|
The test charges is applicable for one core and if the number core increases, test charges will also increase proportionally.
The complete test charges applicable, will be intimated through proforma invoice. |
| 19.1 iii) d)(Phyaical tests for insulation : Hot set ) |
- |
2300 |
|
The test charges is applicable for one core and if the number core increases, test charges will also increase proportionally.
The complete test charges applicable, will be intimated through proforma invoice. |
| 19.1 iii) d)(Phyaical tests for insulation : Permanent set ) |
- |
0 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 19.1 iii) e)(Phyaical tests for insulation : Shrinkage ) |
- |
1000 |
|
The test charges is applicable for one core and if the number core increases, test charges will also increase proportionally.
The complete test charges applicable, will be intimated through proforma invoice. |
| 19.1 iii) e)(Phyaical tests for insulation : Shrinkage - Crack observed ) |
- |
0 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 19.1 iii) f)(Insulation: Waterabsorption(gravimetric)) |
- |
16100 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 19.1 v) a)(Test for strippability of semiconducting strippable insulation screen
(when applicable)) |
- |
10600 |
|
The test charges is applicable for one core and if the number core increases, test charges will also increase proportionally.
The complete test charges applicable, will be intimated through proforma invoice. |
| 19.1 v) b)(Volume resistivity) |
- |
7500 |
|
The test charges is applicable for one core and if the number core increases, test charges will also increase proportionally.
The complete test charges applicable, will be intimated through proforma invoice. |
| 19.1 vi) a)(Physical tests for outer sheath : Tensile stregth ) |
- |
3100 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 19.1 vi) a)(Physical tests for outer sheath : Elongation ) |
- |
3100 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 19.1 vi) b)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth ) |
- |
5300 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 19.1 vi) b)(Physical tests for outer sheath -Ageing in air oven : Elongation ) |
- |
0 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 19.1 vi) b)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation ) |
- |
0 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 19.1 vi) b)(Physical tests for outer sheath -Ageing in air oven : Elongation Variation ) |
- |
0 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 19.1 vi) c)(Phyaical tests for Sheath : Shrinkage ) |
- |
1000 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 19.1 vi) c)(Phyaical tests for Sheath : Shrinkage - Crack observed ) |
- |
0 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 19.1 vi) d)(Sheath : Hot deformation) |
- |
2200 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 19.1 vi) e)(Loss of massIn air oven) |
- |
5300 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 19.1 vi) f)(Sheath : Heat shock test) |
- |
1000 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 19.1 vi) g)(Sheath : Thermalstability) |
- |
3000 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 19.1 vi) h)(Carbon black content of polythene
sheath ) |
- |
4950 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 19.1 vii)(Thermal ageing test for complete cable - Tensile stregth ) |
- |
5300 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 19.1 vii)(Thermal ageing test for complete cable- Elogation ) |
- |
0 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 19.1 vii)(Thermal ageing test for complete cable- Resistivity ) |
- |
0 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 19.1 xi)(Insulation resistance test : volume resistivity ) |
- |
1100 |
|
The test charges is applicable for one core and if the number core increases, test charges will also increase proportionally.
The complete test charges applicable, will be intimated through proforma invoice. |
| 20.2(Partial discharge test) |
- |
4000 |
|
The test charges is applicable for one core and if the number core increases, test charges will also increase proportionally.
The complete test charges applicable, will be intimated through proforma invoice. |
| 20.3(Bending test) |
- |
5700 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 20.4(Dielectric power factor test : As a function of voltage) |
- |
2300 |
|
The test charges is applicable for one core and if the number core increases, test charges will also increase proportionally.
The complete test charges applicable, will be intimated through proforma invoice. |
| 20.4(Dielectric power factor test : As a function of temperature) |
- |
3750 |
|
The test charges is applicable for one core and if the number core increases, test charges will also increase proportionally.
The complete test charges applicable, will be intimated through proforma invoice. |
| 20.5(Heating Cycle Test) |
- |
2000 |
|
The test charges is applicable for one core and if the number core increases, test charges will also increase proportionally.
The complete test charges applicable, will be intimated through proforma invoice. |
| 20.6(Impulse withstand test
(Rated voltage, kV 3.8/6.6
Impulse voltage, kV 60)) |
- |
19750 |
|
The test charges is applicable for one core and if the number core increases, test charges will also increase proportionally.
The complete test charges applicable, will be intimated through proforma invoice. |
| 20.7(High voltage test) |
- |
5200 |
|
The test charges is applicable for one core and if the number core increases, test charges will also increase proportionally.
The complete test charges applicable, will be intimated through proforma invoice. |
| 20.8(Flammability test) |
- |
1600 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 20.1(Oxygen Index Test) |
- |
10300 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 20.11(Flame Retardance Test on Single Cables) |
- |
2300 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 20.12(Flame Retardance Test on Bunched Cables) |
- |
36500 |
|
Applicable for Category B or C.
The complete test charges applicable, will be intimated through proforma invoice. |
| 20.13(Test for Halogen Acid Gas Evolution) |
- |
10300 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 20.14( Test for Smoke Density) |
- |
14550 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 20.15(Temperature Index) |
- |
11700 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 21.1(IDENTIFICATION : Manufacturer's Identification) |
- |
0 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 21.2(IDENTIFICATION : Cable Identification) |
- |
0 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 21.3(IDENTIFICATION : Cable Code) |
- |
0 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
| 20.3 (a)(Partial discharge test (Bending test)) |
- |
4000 |
|
The test charges is applicable for one core and if the number core increases, test charges will also increase proportionally.
The complete test charges applicable, will be intimated through proforma invoice. |
| 20.5 (a)(PD test (heating cycle test)) |
- |
4000 |
|
The test charges is applicable for one core and if the number core increases, test charges will also increase proportionally.
The complete test charges applicable, will be intimated through proforma invoice. |
| 20.6(Impulse Withstand Test
(Rated voltage, kV 6.35/11
Impulse voltage, kV 75)) |
- |
19750 |
|
The test charges is applicable for one core and if the number core increases, test charges will also increase proportionally.
The complete test charges applicable, will be intimated through proforma invoice. |
| 20.6(Impulse Withstand Test
(Rated voltage, kV 11/11
Impulse voltage, kV 95)) |
- |
19750 |
|
The test charges is applicable for one core and if the number core increases, test charges will also increase proportionally.
The complete test charges applicable, will be intimated through proforma invoice. |
| 20.6(Impulse Withstand Test
(Rated voltage, kV 12.7/22
Impulse voltage, kV 125)) |
- |
19750 |
|
The test charges is applicable for one core and if the number core increases, test charges will also increase proportionally.
The complete test charges applicable, will be intimated through proforma invoice. |
| 20.6(Impulse Withstand Test
(Rated voltage, kV 19/33
Impulse voltage, kV 170)) |
- |
19750 |
|
The test charges is applicable for one core and if the number core increases, test charges will also increase proportionally.
The complete test charges applicable, will be intimated through proforma invoice. |
| 15.4 (b)(Cold impact) |
- |
7600 |
|
The complete test charges applicable, will be intimated through proforma invoice. |
|
31 Dec, 2026 |
-
- |
| 14185 |
Central Power Research Institute (CPRI), Bangalore
| 6101024
| IS 13585 : Part 1 (2012) |
Shunt power capacitors of the non - Self - Healing type for ac systems having a rated voltage up to and including 1 000 v: Part 1 general - Performance, testing and rating - Safety requirements - Guide for installation and operation (First Revision) |
- |
- View breakup
Routine tests for all varieties: Rs.20360/-; Type tests: Rs.324720/- for 1 - 4 kVAR, Rs.341510/- for 5 - 10 kVAR, Rs.348100/- for 11 - 30 kVAR, Rs.368190/- for 31 - 50 kVAR, Rs.773730/- for 51 - 100 kVAR;
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
No Record Found
|
|
31 Dec, 2026 |
-
- |
| 14186 |
Central Power Research Institute (CPRI), Bangalore
| 6101024
| IS 1652 (2013) |
Stationary cells and batteries, lead - Acid type with plante positive plates - Specification (Fourth Revision) |
- |
- View breakup
Rs.1,58,850/-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
No Record Found
|
|
31 Dec, 2026 |
-
ISS included w.e.f. 23/7/2018 |
| 14187 |
National Institute of Solar Energy, Gurugram
| 9140024
| IS 16077 (2013) |
Thin - Film terrestrial photovoltaic (PV) modules - Design qualification and type approval |
- |
- View breakup
Rs.11,20,000/-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
No Record Found
|
|
- |
-
(Lab of national repute and eminence, facilities of which are being utilized by BIS.) |
| 14188 |
Central Power Research Institute (CPRI), Bangalore
| 6101024
| IS 1180 : Part 1 (2014) |
Outdoor Type Oil Immersed Distribution Transformers Upto and Including 2 500 kVA, 33kV - Specification Part 1 Mineral Oil Immersed (Fourth Revision) |
- |
274000 View breakup
Complete testing charges:
Rs. 315100/- per transformer (up to 200 kVA without taps);
Rs. 365010/- per transformer (up to 200 kVA with 7 taps);
Rs. 365010/- per transformer ( above 200 kVA & up to 250 kVA with 7 taps);
Rs. 405260/- per transformer (above 250 kVA & up to 500 kVA with 7 taps);
Rs. 408840/- per transformer (1600 kVA & up to 2000 kVA with 7 taps excluding short circuit test); Rs. 443340/- per transformer (2000 kVA & up to 2500 kVA with 7 taps excluding short circuit test); Rs. 275260/- per transformer (500 kVA & up to 630 kVA with 17 taps excluding short circuit test); Rs. 284230/- per transformer (630 kVA & up to 1000 kVA with 17 taps excluding short circuit test); Rs. 399640/- per transformer (1000 kVA & up to 1600 kVA with 17 taps excluding short circuit test).
Test charges will vary depending on the rating of the sample. The applicable test charges will be intimated through a proforma invoice.
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 21.2 a)(Measurement of winding resistance ) |
- |
5100 |
|
Test charges will vary depending on the kVA & Tappings of the Transformer
Test charge applicable will be intimated through a proforma invoice |
| 21.2 b)( Measurement of voltage ratio and check of
phase displacemen) |
- |
3400 |
|
Test charges will vary depending on the kVA & Tappings of the Transformer
Test charge applicable will be intimated through a proforma invoice |
| 21.2 c)( Measurement of short-circuit impedance
(principal tapping, when applicable) and load
loss at 50 percent and 100 percent load) |
- |
10150 |
|
Test charges will vary depending on the kVA & Tappings of the Transformer
Test charge applicable will be intimated through a proforma invoice |
| 21.2 d)(Measurement of no-load loss and current) |
- |
10150 |
|
Test charges will vary depending on the kVA & Tappings of the Transformer
Test charge applicable will be intimated through a proforma invoice |
| 21.2 e)(Measurement of insulation resistance) |
- |
2550 |
|
Test charges will vary depending on the kVA & Tappings of the Transformer
Test charge applicable will be intimated through a proforma invoice |
| 21.2 f)(Induced over-voltage withstand test) |
- |
3200 |
|
Test charges will vary depending on the kVA & Tappings of the Transformer
Test charge applicable will be intimated through a proforma invoice |
| 21.2 g)( Separate-source voltage withstand test) |
- |
1700 |
|
Test charges will vary depending on the kVA & Tappings of the Transformer
Test charge applicable will be intimated through a proforma invoice |
| 21.3(b)(Temperature-rise test) |
- |
41600 |
|
Test charges will vary depending on the kVA & Tappings of the Transformer
Test charge applicable will be intimated through a proforma invoice |
| 21.3(c)(Short-circuit withstand test) |
- |
84450 |
|
Test charges will vary depending on the kVA & Tappings of the Transformer
Test charge applicable will be intimated through a proforma invoice |
| 21.4 c(No load current at 112.5 percent voltage.) |
- |
1700 |
|
Test charges will vary depending on the kVA & Tappings of the Transformer
Test charge applicable will be intimated through a proforma invoice |
| 21.5.1.1(Pressure test-Type test (For Transformers up to 200 kVA
)) |
- |
11000 |
|
Test charges will vary depending on the kVA & Tappings of the Transformer
Test charge applicable will be intimated through a proforma invoice |
| 21.5.1.2(Pressure test-routine test (For Transformers up to 200 kVA
)) |
- |
11000 |
|
Test charges will vary depending on the kVA & Tappings of the Transformer
Test charge applicable will be intimated through a proforma invoice |
| 21.5.2.1(Type test : For Transformers Above 200 kVA and Up to Including 2 500 kVA) |
- |
11000 |
|
Test charges will vary depending on the kVA & Tappings of the Transformer
Test charge applicable will be intimated through a proforma invoice |
| 21.5.2.2(routine test :For Transformers Above 200 kVA and Up to Including 2 500 kVA) |
- |
11000 |
|
Test charges will vary depending on the kVA & Tappings of the Transformer
Test charge applicable will be intimated through a proforma invoice |
| 21.5.2.3( Oil leakage test (routine test)) |
- |
5500 |
|
Test charges will vary depending on the kVA & Tappings of the Transformer
Test charge applicable will be intimated through a proforma invoice |
| 21.5.3.3(Oil leakage test (routine test)) |
- |
5500 |
|
Test charges will vary depending on the kVA & Tappings of the Transformer
Test charge applicable will be intimated through a proforma invoice |
| 21.5.3.1(For Single Phase Distribution Transformers Up to Including 25 kVA : pressure test (type test)) |
- |
11000 |
|
Test charges will vary depending on the kVA & Tappings of the Transformer
Test charge applicable will be intimated through a proforma invoice |
| 21.5.3.2(For Single Phase Distribution Transformers Up to Including 25 kVA : pressure test (routine test)) |
- |
11000 |
|
Test charges will vary depending on the kVA & Tappings of the Transformer
Test charge applicable will be intimated through a proforma invoice |
| 21.4 d(Paint adhesion tests) |
- |
2400 |
|
Test charges will vary depending on the kVA & Tappings of the Transformer
Test charge applicable will be intimated through a proforma invoice |
| 21.4 a)( Determination of sound levels) |
- |
28800 |
|
Test charges will vary depending on the kVA & Tappings of the Transformer
Test charge applicable will be intimated through a proforma invoice |
| 21.3(a )(Lightning impulse test) |
- |
58300 |
|
Test charges will vary depending on the kVA & Tappings of the Transformer
Test charge applicable will be intimated through a proforma invoice |
| 21.4 e(BDV and moisture content of oil in the transformer) |
- |
3000 |
|
Test charges will vary depending on the kVA & Tappings of the Transformer
Test charge applicable will be intimated through a proforma invoice |
|
31 Dec, 2026 |
-
- |
| 14189 |
India Government Mint Assay Laboratory, Mumbai
| 7131914
| IS 2112 (2014) |
Silver and silver alloys, jewellery/ artefacts - Fineness and marking - Specification (Third Revision) |
- |
- View breakup
Rs.400/- + S.Tax
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
No Record Found
|
|
- |
-
(Lab of national repute and eminence, facilities of which are being utilized by BIS.) |
| 14190 |
DELHI TEST HOUSE, Azadhpur
| 8131406
| IS 13334 : Part 1 (2014) |
Skimmed milk powder - Specification: Part 1 standard grade (Second Revision) |
- |
8150 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.6(Listeria monocytogenes) |
- |
500 |
|
- |
| 5.6(Spore count, Anaerobic (Sulfite reducing Clostridia)) |
- |
250 |
|
- |
| 5.6(Spore count, Aerobic (Bacillus cereus)) |
- |
250 |
|
- |
| 5.6(Salmonella) |
- |
500 |
|
- |
| 5.6(Coagulase positive Staphylococcus aureus) |
- |
500 |
|
- |
| 5.6(Escherichia coli) |
- |
500 |
|
- |
| 5.6(Coliform count ) |
- |
500 |
|
- |
| 5.6(Bacterial count) |
- |
500 |
|
- |
| 5.6(Scorched particles) |
- |
550 |
|
- |
| 5.6(Titratable acidity (lactic acid)) |
- |
550 |
|
- |
| 5.6(Total ash (on dry basis)) |
- |
550 |
|
- |
| 5.6(Insolubility index) |
- |
550 |
|
- |
| 5.6(Milk fat) |
- |
550 |
|
- |
| 5.6(Milk protein in milk solids not fat) |
- |
500 |
|
- |
| 5.6(Moisture) |
- |
500 |
|
- |
| 5.2(Absence of extraneous matter, added colour and added flavour) |
- |
300 |
|
- |
| 4(Description) |
- |
300 |
|
- |
| Cl 5.4(The flavour of the product or of the reconstituted
milk shall be pleasant and clean (see IS 10030).) |
- |
300 |
|
- |
|
17 Jun, 2027 |
-
Exclusion: Cl 5.3 (Calcium chloride, citric acid and sodium citrate, sodium salts of orthophosphoric acid and polyphosphoric acid (as linear phosphate) |
