| 14221 |
BIS, Eastern Regional Laboratory (ERL)
| None
| IS 8794 (1988) |
Specification for cast iron detachable joints for use with asbestos cement pressure pipes (First Revision) |
For all DN and Class. |
3900/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6.1, Table 2 (External Dia of AC Pipe(D2)) |
- |
|
|
|
| 6.1, Table 2 (Inside diaFlange(DI)) |
- |
|
|
|
| 6.1, Table 2 (External Dia at Centre(DEC)) |
- |
|
|
|
| 6.1, Table 2 (Collar Width(Wc)) |
- |
|
|
|
| 6.1, Table 3 (Nominal Dia of Bolt(do)) |
- |
|
|
|
| 6.1, Table 3 (Minimum prefared length of bolt(L)) |
- |
|
|
|
| 8.4 (Coating) |
- |
|
|
|
|
- |
-
Excluding Cl 5 Hydrostatic test. Prepared piece required for tensile and hardness test. |
| 14222 |
BIS, Central Laboratory (CL)
| None
| IS 17048 (2018) |
Halogen free flame retardant (HFFR) cables for working voltages up to and including 1 100 Volts - Specification |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1.1 a) (Conductor : Material ) |
- |
|
|
|
| 4.1.1 b) (Material : Seperator tape ) |
- |
|
|
|
| 4.1.1 d) , 11.1, 12.1, 13.1,14.1 (Class of conductor ) |
- |
|
|
|
| 4.1.1 e) (Shape of conductor ) |
- |
|
|
|
| 4.1.1 f) (Nominal size of conductor ) |
- |
|
|
|
| 4.2.1, 11.2, 12.2, 13.2, 14.2 (Insulation : Material ) |
- |
|
|
|
| 4.2.2, 11.2, 12.2, 13.2, 14.2 (Insulation : Application ) |
- |
|
|
|
| 4.2.3,11.2, 12.2, 13.2 (Thickness of insulation - Avearge : IS 10810 ( Part 6 )) |
- |
|
|
|
| 4.2.3, 11.2, 12.2, 13.2, 14.2 (Thickness of insulation - miniumum : IS 10810 ( Part 6 )) |
- |
|
|
|
| 4.3 (Fillers) |
- |
|
|
|
| 4.4 (Binder Tape) |
- |
|
|
|
| 4.5.1,13.4, 14.4 (Sheath : Compound ) |
- |
|
|
|
| 4.5.2, 13.4, 14.4 (Sheath : Application) |
- |
|
|
|
| 4.5.3,13.4, 14.4 (Thickness of sheath - Average : IS 10810 (Part 6)) |
- |
|
|
|
| 4.5.3,13.4, 14.4 (Thickness of sheath - Minimum : IS 10810 (Part 6)) |
- |
|
|
|
| 4.5.5, 11.3, 12.3, 13.6, 14.6 (Overall Dimensions) |
- |
|
|
|
| 4.5.5.1, 11.3, 12.3,13.5, 14.5 (Ovality) |
- |
|
|
|
| 4.5.6, 13.4 (Colour of Sheath) |
- |
|
|
|
| 5.1 (High Voltage Test (at Room Temperature)) |
- |
|
|
|
| 5.3 (Flammability Test- IS 10810 (Part 53).) |
- |
|
|
|
| 5.1 (Persulphate Test- IS 10810 (Part 4).) |
- |
|
|
|
| 5.12 (Hot Set Test- IS 10810 (Part 30).) |
- |
|
|
|
| 5.12 (Permanent Set - IS 10810 (Part 30).) |
- |
|
|
|
| 5.13 (Water Immersion Test (Effect of Water on Sheath) : Tensile strength -IS 10810 (Part 7).) |
- |
|
|
|
| 5.13 (Water Immersion Test (Effect of Water on Sheath) : Elogation -IS 10810 (Part 7).) |
- |
|
|
|
| 5.15 (Cold Bend Test-IS 10810 (Part 20).) |
- |
|
|
|
| 5.16 (Cold Impact Test- IS 10810 (Part 21).) |
- |
|
|
|
| 4.2.4 (Insulation : Tensile stregth ( Before ageing)-IS 10810 (Part 7) ) |
- |
|
|
|
| 4.2.4 (Insulation : Elongation ( Before ageing) -IS 10810 (Part 7)) |
- |
|
|
|
| 4.2.4 (Insulation : Tensile stregth ( After ageing) - IS 10810 (Part 7) ) |
- |
|
|
|
| 4.2.4 (Insulation : Elongation (after ageing) - IS 10810 (Part 7) ) |
- |
|
|
|
| 4.2.5 (Insulation : Tensile stregth variation ( After ageing) - IS 10810 (Part 7) ) |
- |
|
|
|
| 4.2.5 (Insulation : Elongation variation (after ageing) - IS 10810 (Part 7) ) |
- |
|
|
|
| 4.5.4, 13.4 (Sheath : Tensile stregth ( Before ageing)-IS 10810 (Part 7) ) |
- |
|
|
|
| 4.5.4,13.4 (Sheath : Elongation ( Before ageing) -IS 10810 (Part 7)) |
- |
|
|
|
| 4.5.4, 13.4, 14.4 (Sheath : Tensile stregth ( After ageing) - IS 10810 (Part 7) ) |
- |
|
|
|
| 4.5.4, 13.4, 14.4 (Sheath : Elongation (after ageing) - IS 10810 (Part 7) ) |
- |
|
|
|
| 4.5.5, 13.4, 14.4 (Sheath : Tensile stregth variation ( After ageing) - IS 10810 (Part 7) ) |
- |
|
|
|
| 4.5.5, 13.4,14.4 (Sheath : Elongation variation (after ageing) - IS 10810 (Part 7) ) |
- |
|
|
|
| 5.16 (Cold Impact Test- IS 10810 (Part 21).) |
- |
|
|
|
| 6.1, Table 1 (CORE IDENTIFICATION) |
- |
|
|
|
| 6.2 (Core Identification by Numbers) |
- |
|
|
|
| 6.2.2 (Durability) |
- |
|
|
|
| 10.2 (marking) |
- |
|
|
|
| 10.2.1 (Standards marking) |
- |
|
|
|
| Cl.4.2.1 & Annex A (Insulation Resistance Constant at Rated Temperature (70°C)) |
- |
|
|
|
| Table 2, III a (i) (Conductor Resistance) |
- |
|
|
|
| Annex A (Hot Deformation) |
- |
|
|
|
|
- |
-
EXCLUDING Oxygen index, Temperature index, Ozone resistance test, Assessment of halogen, Flame retardant test & Smoke density test; |
| 14223 |
BIS, Northern Regional Laboratory (NRL)
| None
| IS 16720 (2018) |
Pulverized Fuel Ash-Cement Bricks- Specification |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1 and fig.1A &1B (Dimensions- Length (L) ) |
- |
|
|
|
| 4.1 and fig.1A &1B (Dimensions- Width (B) ) |
- |
|
|
|
| 4.1 and fig.1A &1B (Dimensions- Height (H)) |
- |
|
|
|
| 4.1 & 4.3 and fig.1A &1B (Dimensions - Depth) |
- |
|
|
|
| 4.1 and fig.1A &1B (Dimensions) |
- |
|
|
|
| 8.1 (GENERAL) |
- |
|
|
|
| 8.3 (Density
Annex C of IS 2185 (Part 1)) |
- |
|
|
|
| 8.4 and Table 1 (Compressive Strength - Individual
IS 3495 (Part 1)) |
- |
|
|
|
| 8.4 and Table 1 (Compressive Strength - Average
IS 3495 (Part 1)) |
- |
|
|
|
| 8.6 (Water Absorption
IS 3495 (Part 2)) |
- |
|
|
|
| 8.5 (Drying Shrinkage
IS 4139) |
- |
|
|
|
|
- |
-
Complete |
| 14224 |
BIS, Central Laboratory (CL)
| None
| IS 3470 (2017) |
Hexane, food grade - Specification (Second Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Table 1(i) (Density at — [P : 32]1) / [P : 16]/ ASTM D IS 4502/ ISO 3675 / ISO 12185) |
- |
|
|
|
| Table 1(iv) (Non-volatile residue, Annex A) |
- |
|
|
|
| Table 1(v) (Reaction of non-volatile residue, Annex B) |
- |
|
|
|
| Table 1(vii) (Lead, as Pb, Annex D4, ASTM D 3605) |
- |
|
|
|
|
- |
-
- |
| 14225 |
BIS, Central Laboratory (CL)
| None
| IS 4533 (1995) |
Suction apparatus - Specification (Second Revision) |
- |
5850 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1 (Metal Parts- as per Cl. 4.1) |
- |
|
|
|
| 4.2 (Rubber Components- as per Cl. 4.2) |
- |
|
|
|
| 4.3 (Glass-as per Cl. 4.3) |
- |
|
|
|
| 4.4 (Glass-as per Cl. 4.4) |
- |
|
|
|
| 5.2 (Base- as per Cl. 5.2) |
- |
|
|
|
| 5.3 (Vaccum Gauge- as per Cl. 5.3) |
- |
|
|
|
| 5.3.1 (as per Cl. 5.3.1) |
- |
|
|
|
| 5.4 (Suction Bottle & Lid) |
- |
|
|
|
| 5.5 (Suction System Filters &Traps) |
- |
|
|
|
| 5.6 (Tubings & Couplings) |
- |
|
|
|
| 5.7 (Castors) |
- |
|
|
|
| 6.3 (as per Cl. 6.3) |
- |
|
|
|
| 6.5 (as per Cl. 6.5) |
- |
|
|
|
| 6.6 (as per Cl. 6.6) |
- |
|
|
|
| 8.1 (as per Cl. 8.1) |
- |
|
|
|
| 8.3 (Cl. 8.3- As per IS 1068) |
- |
|
|
|
| 9.1 (Adhesion Test- as per Cl. 9.1) |
- |
|
|
|
|
- |
-
- |
| 14226 |
BIS, Central Laboratory (CL)
| None
| IS 3899 (1981) |
Specification for zineb, water dispersible powders |
- |
Please see remarks. View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 2.2 Table 1 (Wettability) |
- |
|
|
|
| 2.2 Table 1 ( Zineb content, NV upto 9) |
- |
|
|
|
| 2.2 Table 1 (Zineb content, NV above 9 and below 50) |
- |
|
|
|
| 2.2 Table 1 (Zineb content, NV above 50) |
- |
|
|
|
| 2.2 Table 1 (Suspensibility, after accelerated storage) |
- |
|
|
|
| 2.2 Table 1 (Material passing through 45 micron IS Sieve, after
accelerated storage) |
- |
|
|
|
| 2.1 (Description) |
- |
|
|
|
|
- |
-
- |
| 14227 |
BIS, Northern Regional Laboratory (NRL)
| None
| IS 3601 (2006) |
Steel tubes for mechanical and general engineering purposes - Specification (Second Revision) |
- |
2000/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6.0 (Workmanship) |
- |
|
|
|
| 8.0 (Straightness) |
- |
|
|
|
| 11.1 (Surface Protection) |
- |
|
|
|
| 11.2 (Surface Protection) |
- |
|
|
|
| 19.1.1, 24.1.1, 28.1.1, 33.1.1 (Dimensions- Outside Dia) |
- |
|
|
|
| 19.1.2, 24.1.2, 28.1.2, 33.1.2 (Dimensions- Thickness) |
- |
|
|
|
| 13.1.3 (Tensile Strength) |
- |
|
|
|
| 13.1.1 (Yield Stress) |
- |
|
|
|
| 13.1.2 (Elongation) |
- |
|
|
|
| 13.2 (Flattening Test) |
- |
|
|
|
| 13.3 (Bend Test (Strip)) |
- |
|
|
|
| 13.6 (Crush Test) |
- |
|
|
|
| 19.1.3 (Height of Internal Fin) |
- |
|
|
|
| 11.1 (Surface Protection) |
- |
|
|
|
| 11.2 (Surface Protection) |
- |
|
|
|
| 4.1 (Sulphur-Percentage by mass) |
- |
|
|
|
| 4.1 (Phosphorus-Percentage by mass) |
- |
|
|
|
| 13.4 (Bend Test (Whole Tube)) |
- |
|
|
|
| 16 (Marking) |
- |
|
|
|
| Cl. 10 Annex B Cl. 17, Cl. 19 (Mass) |
- |
|
|
|
| 4.0 (c) (Micro Alloying elements (Nb+V+Ti)) |
- |
|
|
|
| 4.0 (f) (Nitrogen content) |
- |
|
|
|
| 4.0 (a) (Carbon as C - IS:8811) |
- |
|
|
|
| 4.0 (b) (Manganese as Mn - IS:8811) |
- |
|
|
|
|
- |
-
Test facility is complete |
| 14228 |
BIS, Southern Regional Laboratory (SRL)
| None
| IS 5135 : Part 1 (1994) |
Specification for hand - Rotary duster: Part 1 belly - Mounted type (Second Revision) |
- |
Testing charges for the product are Rs 7600/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6.0 (Capacity) |
- |
|
|
|
| 8.0 (WORKMANSHIP AND FINISH) |
- |
|
|
|
|
- |
-
" 1 set
Excluding 1.Test for Agitation 2.Test for Strap and Its Assembly 3.PERFORMANCE REQUIREMENTS 4. raw material tests |
| 14229 |
BIS, Southern Regional Laboratory (SRL)
| None
| IS 1711 (1984) |
Specification for self - Closing taps for water supply purposes |
- |
Rs 600/-,excl endurance test View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl. 3 (NOMINAL SIZE) |
- |
|
|
|
| Cl. 5 (MANUFACTURE AND WORKMANSHIP) |
- |
|
|
|
| Cl. 6.2 (Body and Gland) |
- |
|
|
|
| Cl. 6.3 (Valve and Spindle) |
- |
|
|
|
| Cl. 6.4 (Screw Threads ) |
- |
|
|
|
| Cl. 6.5 (Washers) |
- |
|
|
|
| Cl. 7 (FINISH) |
- |
|
|
|
|
- |
-
" 5 NOS.+PIECE FOR COATING
Excluding Except test for flow of water at the outlet end (cl 8.2) and endurance test |
| 14230 |
BIS, Northern Regional Laboratory (NRL)
| None
| IS 15914 (2011) |
High tensile strength flat rolled steel plate (Up To 6 Mm), sheet and strip for the manufacture of welded gas cylinder - Specification |
- |
Rs. 7760/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 7 (UTM) |
- |
|
|
|
| Cl 9 (Workmanship) |
- |
|
|
|
| Cl 10 (Length, Width & Thickness) |
- |
|
|
|
| 6.0 (CARBON) |
- |
|
|
|
| 6.0 (SULPHUR) |
- |
|
|
|
| 6.0 (SILICON) |
- |
|
|
|
| 6.0 (MANGANESE) |
- |
|
|
|
| 6.0 (PHOSPHORUS) |
- |
|
|
|
| 6.0 (NITROGEN) |
- |
|
|
|
|
- |
-
Excluding Microalloying Elements |
| 14231 |
BIS, Northern Regional Laboratory (NRL)
| None
| IS 878 (2008) |
Laboratory glassware - Graduated measuring cylinders (Second Revision) |
- |
Rs.4200/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Table-1 (Nominal capacity) |
- |
|
|
|
| Table-1 (Overall height) |
- |
|
|
|
| Table-1 (Distance from top of scale to top of cylinder) |
- |
|
|
|
| Table-1 (Internal height to highest graduation line) |
- |
|
|
|
| Table-1 (Sub-divisions) |
- |
|
|
|
| Table-1 (capacity at lowest graduation line) |
- |
|
|
|
|
- |
-
Excluding Accuracy test and material test |
| 14232 |
BIS, Northern Regional Laboratory (NRL)
| None
| IS 10908 (1991) |
Flexible rubber tubing for liquefied petroleum gas - Specification (First Revision) |
- |
7800 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl.4.1 (The tubing made out of this material shall be green in colour ) |
- |
|
|
|
| Cl.4.2 (The walls shall be seamless and free from all visible such as lumps, blows-holes,cracks etc and the bore shall be clean and free from loose particles which might be carried forward by the gas) |
- |
|
|
|
| Cl4.3.1 (The tubing shall be supplied in 6.4 and 7.0 mm inisde diametre,The tolerance on nominal diamtere shall be as per table 1) |
- |
|
|
|
| Cl4.3.2 (it shall comply with the thickness as givien in table 1 when measured according to 4.2.2 of IS 443;1975 The readings shall be taken from different sample sections.) |
- |
|
|
|
| Cl.4.4,(Cl.4.4.1) (when tested in accordance with the method given in AnnexureA. It shall fit over the standard and oversize metal nozzle shown in Fig1,2 and 3) |
- |
|
|
|
| Cl.4.4,(Cl.4.4.2) (it shall remain atatched to both nozzles throught the test period) |
- |
|
|
|
| Cl.4.5 (When immersed in water for 5 minutes under an internal air pressure of 0.25 Mpa or 250kPa (2.5 bar), the increase in the outside diametre of the tubing ,Also the same shall not burst when the pressure is increasded to 0.5 Mpa or 500 kpa (5 bar0, The test shall be carried out on a lengtj of 60 cm.) |
- |
|
|
|
| Cl.4.5 (When immersed in water for 5 minutes under an internal air pressure of 0.25 Mpa or 250kPa (2.5 bar), the same shall not burst when the pressure is increasded to 0.5 Mpa or 500 kpa (5 bar0, The test shall be carried out on a lengtj of 60 cm.) |
- |
|
|
|
| Cl.4.9 (Crushing test , ) |
- |
|
|
|
| Cl.4.6 (Shore Hardness: the hardnesss on the flatsurface of the cut/slit tubing shall be measured and the same shall be 60 ± 5˚A) |
- |
|
|
|
| Cl.4.7 (Accelerated Ageing test, the flexible tubing or suitable portion of the tubing shall be subjected to accelerated ageing at a temperature of 100Deg Cfor 72 hours in accordance with the method prescribed in IS 3400 (Part 4) it shall not show a change of + 10 A of its orignal shore hardness ) |
- |
|
|
|
| Cl.4.8.1 (Flexible test , Annexure B The gas pressure shown on the manometre shall not drop by more than 1 Kpa) |
- |
|
|
|
| Cl4.8.2 (The tubing shall be so flexible that it will make contact with a cylinder former of radius 68 mm for at least 110 deg of its circumference when the tubing is placed over the framer and a mass of 1.6 kg is attcahed to each end) |
- |
|
|
|
| Cl.4.10 (Resistance to lpg ,Annexure c Shall not be more than 15 % of the initial mass of the tubing and the amount of exctractable matter shall not excced 10 percent of the iniital mass of te tubing) |
- |
|
|
|
| Cl.4.11 (Resistance to Ozone ,Annexure D Shall not show any breakage on surface or crack or defects) |
- |
|
|
|
| Cl.4.12 (Burning behaviour on exposure to small flame,Annexure E tubing shall not burn to either of the outer marks within the test period of 45 seconds) |
- |
|
|
|
|
- |
-
Excluding Resistance to Ozone, Resistance to LPG, Accelerated Ageing test flexibilty test, thickness and hardness |
| 14233 |
BIS, Northern Regional Laboratory (NRL)
| None
| IS 1835 (1976) |
Specification for round steel wire for ropes (Third Revision) |
- |
Rs 4500/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 3 (Manufacturing ) |
- |
|
|
|
| Cl 7 (Workmanship) |
- |
|
|
|
| Cl 8 (Manufacturing ) |
- |
|
|
|
| Cl 10 (Diameter) |
- |
|
|
|
| Cl 11.2 (Workmanship) |
- |
|
|
|
| Cl 12.2 (UTM) |
- |
|
|
|
| Cl 12.3 (Torsion) |
- |
|
|
|
| Cl 12.4 (Reverse Bend) |
- |
|
|
|
| Cl 12.5 (Wrap) |
- |
|
|
|
| Cl 12.6 (Adhesion ) |
- |
|
|
|
| Cl 11.3 (Coating Test) |
- |
|
|
|
| Cl. 9.1, T-3 (Mass of Zinc Coating) |
- |
|
|
|
| Cl. 9.1, T-3 (Uniformity) |
- |
|
|
|
| Cl. 5.1, T-1 (C) |
- |
|
|
|
| Cl. 5.1, T-1 (Mn) |
- |
|
|
|
| Cl. 5.1, T-1 (Si) |
- |
|
|
|
| Cl. 5.1, T-1 ( Grade 1) (P) |
- |
|
|
|
| Cl. 5.1, T-1 ( Grade 1) (S) |
- |
|
|
|
| Cl. 5.1, T-1 ( Grade 5) (Cr) |
- |
|
|
|
| Cl. 5.1, T-1 ( Grade 1) (Cu) |
- |
|
|
|
| Cl. 5.1, T-1 ( Grade 2) (Cu) |
- |
|
|
|
| Cl. 5.1, T-1 ( Grade 3) (Cu) |
- |
|
|
|
| Cl. 5.1, T-1 ( Grade 4) (Cu) |
- |
|
|
|
| Cl. 5.1, T-1 ( Grade 5) (Cu) |
- |
|
|
|
| Cl. 5.1, T-1 ( Grade 1) (Ni) |
- |
|
|
|
| Cl. 5.1, T-1 ( Grade 2) (Ni) |
- |
|
|
|
| Cl. 5.1, T-1 ( Grade 3) (Ni) |
- |
|
|
|
| Cl. 5.1, T-1 ( Grade 4) (Ni) |
- |
|
|
|
| Cl. 5.1, T-1 ( Grade 5) (Ni) |
- |
|
|
|
|
- |
-
Excluding Microalloying Elements for the wire having diameter below 4mm |
| 14234 |
BIS, Northern Regional Laboratory (NRL)
| None
| IS 3954 (1991) |
Hot Rolled Steel Channel Sections for General Engineering Purposes - Dimensions |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4, 6.1, Table 1 (CHG 16, Mass) |
- |
|
|
|
| 4, 6.1, Table 1 (CHG 16, Depth of channel) |
- |
|
|
|
| 4, 6.1, Table 1 (CHG 16, Width of flange) |
- |
|
|
|
| 4, 6.1, Table 1 (CHG 16, Thickness of web) |
- |
|
|
|
| 4, 6.1, Table 1 (CHG 16, Thickness of flange) |
- |
|
|
|
| 4, 6.1, Table 1 (CHG 16, Radius at root) |
- |
|
|
|
| 4, 6.1, Table 1 (CHG 16, Radius at toe) |
- |
|
|
|
| 4, 6.1, Table 1 (CHG 16, Centre of gravity) |
- |
|
|
|
| 4, 6.1, Table 1 (CHG 16, Slope of flange) |
- |
|
|
|
| 4, 6.1, Table 1 (CHG 20, Mass) |
- |
|
|
|
| 4, 6.1, Table 1 (CHG 20, Depth of channel) |
- |
|
|
|
| 4, 6.1, Table 1 (CHG 20, Width of flange) |
- |
|
|
|
| 4, 6.1, Table 1 (CHG 20, Thickness of web) |
- |
|
|
|
| 4, 6.1, Table 1 (CHG 16, Thickness of flange) |
- |
|
|
|
| 4, 6.1, Table 1 (CHG 20, Slope of flange) |
- |
|
|
|
| 4, 6.1, Table 1 (CHG 20, Radius at root) |
- |
|
|
|
| 4, 6.1, Table 1 (CHG 16, Radius at toe) |
- |
|
|
|
| 4, 6.1, Table 1 (CHG 20, Centre of gravity) |
- |
|
|
|
| 4, 6.1, Table 1 (CHG 40, Mass) |
- |
|
|
|
| 4, 6.1, Table 1 (CHG 40, Depth of channel) |
- |
|
|
|
| 4, 6.1, Table 1 (CHG 40, Width of flange) |
- |
|
|
|
| 4, 6.1, Table 1 (CHG 40, Slope of flange) |
- |
|
|
|
| 4, 6.1, Table 1 (CHG 40, Radius at root) |
- |
|
|
|
| 4, 6.1, Table 1 (CHG 16, Radius at toe) |
- |
|
|
|
| 4, 6.1, Table 1 (CHG 40, Centre of gravity) |
- |
|
|
|
|
- |
-
Test facility is complete |
| 14235 |
BIS, Northern Regional Laboratory (NRL)
| None
| IS 1264 (1997) |
Brass gravity die castings - Specification (Fourth Revision) |
- |
1435.00 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.0 (Freedom from defects) |
- |
|
|
|
| 6.0 (Size) |
- |
|
|
|
| 6.0 (Mass) |
- |
|
|
|
| 9.0 (Pressure test) |
- |
|
|
|
|
- |
-
Facility for Chemical tests not available |
| 14236 |
BIS, Northern Regional Laboratory (NRL)
| None
| IS 6760 (1972) |
Specification for slotted countersunk head wood screws |
- |
Rs.900.0 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.1, Table 1 (Diameter of Unthreaded Shank d, Nominal) |
- |
|
|
|
| 3.1, Table 1 (Diameter of Unthreaded Shank d, maximum) |
- |
|
|
|
| 3.1, Table 1 (Diameter of Unthreaded Shank d, Minimum) |
- |
|
|
|
| 3.1, Table 1 (V*) |
- |
|
|
|
| 3.1, Table 1 (Pitch) |
- |
|
|
|
| 3.1, Table 1 (Diameter of Head, D, Maximum) |
- |
|
|
|
| 3.1, Table 1 (Diameter of Head, D, Minimum) |
- |
|
|
|
| 3.1, Table 1 (Depth of Head c†, maximum) |
- |
|
|
|
| 3.1, Table 1 (Depth of Head c†, minimum) |
- |
|
|
|
| 3.1, Table 1 (Width of Slot s, maximum) |
- |
|
|
|
| 3.1, Table 1 (Width of Slot s, minimum) |
- |
|
|
|
| 3.1, Table 1 (Depth Slot n‡, Maximum) |
- |
|
|
|
| 3.1, Table 1 (Depth Slot n‡, Mainimum) |
- |
|
|
|
|
- |
-
- |
| 14237 |
BIS, Northern Regional Laboratory (NRL)
| None
| IS 274 : Part 1 and 2 (1981) |
Specification for shovels: Part 1 genral purpose shovels: Part 2 heat - Treated shovels (Third Revision) |
- |
Rs 600/, Rs 675/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5 Table-1,2 (Shape) |
- |
|
|
|
| 5 Table-1,2 (Dimensions- A) |
- |
|
|
|
| 5 Table-1,2 (Dimensions- B) |
- |
|
|
|
| 5 Table-1,2 (Dimensions- C) |
- |
|
|
|
| 5 Table-1,2 (Dimensions- D) |
- |
|
|
|
| 5 Table-1,2 (Dimensions- E) |
- |
|
|
|
| 5 Table-1,2 (Dimensions- G) |
- |
|
|
|
| 5 Table-1,2 (Dimensions- H) |
- |
|
|
|
| 5 Table-1,2 (Dimensions- K) |
- |
|
|
|
| 5 Table-1,2 (Dimensions- L) |
- |
|
|
|
| 6.1 (Blade thickness) |
- |
|
|
|
| 7.0 (Mass) |
- |
|
|
|
| 8.0 (Manufacture) |
- |
|
|
|
| 8.0 (Manufacture) |
- |
|
|
|
| 8.0 (Manufacture) |
- |
|
|
|
| 9.1 (Handles) |
- |
|
|
|
| 9.3 (Handles) |
- |
|
|
|
| 11.0 (Workmanship & Finish
) |
- |
|
|
|
| 12.0 (Preservative Treatment
) |
- |
|
|
|
| 4.1 (Sulphur) |
- |
|
|
|
| 4.1 (Phosphorus) |
- |
|
|
|
|
- |
-
Excluding Microalloying Elements |
| 14238 |
BIS, Bengaluru Branch Laboratory (BNBL)
| None
| IS 3802 (2019) |
Roasted coffee - Chicory powder - Specification (Second Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Annex E of IS 3077 (Moisture, percent by mass, Max) |
- |
|
|
|
| Annex F of IS 3077 (Total ash, percent by mass (on dry basis)) |
- |
|
|
|
| Annex G of IS 3077 (Acid insoluble ash (on dry basis), percent by mass, Max) |
- |
|
|
|
| Annex K of IS 3077 (Water soluble matter (on dry basis), percent by mass) |
- |
|
|
|
| Annex L of IS 3077 (Caffeine (on dry basis), percent by mass, Min) |
- |
|
|
|
| Clause 15 of IS 1699 (Copper, ppm, Max) |
- |
|
|
|
|
- |
-
Test facility is not available for Caffeine. |
| 14239 |
BIS, Northern Regional Laboratory (NRL)
| None
| IS 2039 : Part 1 to 3 (1991) |
Steel tubes for bicycle and cycle rickshaws - Specification (Second Revision) |
- |
Rs.4320.00 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl. 6.1 (Workmanship) |
- |
|
|
|
| Cl. 6.2 (Fin Height) |
- |
|
|
|
| Cl. 6.3 (Straightness) |
- |
|
|
|
| Cl. 8.1 (Tensile Strength) |
- |
|
|
|
| Cl. 8.1 (Yield Strength) |
- |
|
|
|
| Cl. 8.1 (Elongation) |
- |
|
|
|
| Cl. 8.2 (Drift Expansion Test- IS 2335) |
- |
|
|
|
| Cl. 8.3 (Flattening Test-IS 2338) |
- |
|
|
|
| Cl. 9 (Diameter) |
- |
|
|
|
| Cl. 9 (Thickness) |
- |
|
|
|
| Cl. 3.2.1, Table 4 (Yield Stress) |
- |
|
|
|
| Cl. 3.2.1, Table 4 (UTS) |
- |
|
|
|
| Cl. 3.2.1, Table 4 (Elongation) |
- |
|
|
|
| Cl. 3.2.2, Table 2 (Drift Expansion Test- IS 2335) |
- |
|
|
|
| Cl. 3.2.3, Table 3 (Flattening Test-IS 2338) |
- |
|
|
|
| Cl. 4.2.1 (Diameter) |
- |
|
|
|
| Cl. 4.2.2 (Thickness) |
- |
|
|
|
| Cl. 4.2.3 (Length) |
- |
|
|
|
| Cl. 4.2.1, Table 7 (Yield Stress) |
- |
|
|
|
| Cl. 4.2.1, Table 7 (UTS) |
- |
|
|
|
| Cl. 4.2.1, Table 7 (Crushing) |
- |
|
|
|
| Cl. 4.2.2, Table 8 (Drift Expansion Test- IS 2335) |
- |
|
|
|
| Cl. 4.2.3, Table 9 (Flattening Test-IS 2338) |
- |
|
|
|
| Cl. 5.2.1, Table 10 (Diameter) |
- |
|
|
|
| Cl. 5.2.2 (Mean Thickness) |
- |
|
|
|
| Cl. 5.2.3, Table 6 (Length) |
- |
|
|
|
| Cl. 5.1 Table 1 (Carbon) |
- |
|
|
|
| Cl. 3.1 (Sulphur) |
- |
|
|
|
| Cl. 3.1 (Phosphorous) |
- |
|
|
|
| Cl. 3.1 (Manganese) |
- |
|
|
|
| Cl. 3.1 (Silicon) |
- |
|
|
|
|
- |
-
- |
| 14240 |
BIS, Bengaluru Branch Laboratory (BNBL)
| None
| IS 10116 (2015) |
Boric acid - Specification (First Revision) |
- |
Please see remarks View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.2, 4.3, 4.4, Table 1 (Boric acid (as H3BO3 )) |
- |
|
|
|
| 4.2, 4.3, 4.4, Table 1 (Water insoluble matter) |
- |
|
|
|
| 4.2, 4.3, 4.4, Table 1 (Heavy metals (as Pb)) |
- |
|
|
|
| 4.2, 4.3, 4.4, Table 1 (Iron (as Fe)) |
- |
|
|
|
| 4.2, 4.3, 4.4, Table 1 (Ca) |
- |
|
|
|
| 4.2, 4.3, 4.4, Table 1 (Na) |
- |
|
|
|
| 4.2, 4.3, 4.4, Table 1 (Cl) |
- |
|
|
|
| 4.2, 4.3, 4.4, Table 1 (Sulphate (as SO4 )) |
- |
|
|
|
| 4.2, 4.3, 4.4, Table 1 (Phosphate (PO4 )) |
- |
|
|
|
| 4.5 (Additional Requirement for Technical Grade Boric Acid) |
- |
|
|
|
| 4.2, 4.3, 4.4, Table 1 (Moisture) |
- |
|
|
|
| 4.2
( Description) |
- |
|
|
|
|
- |
-
Complete test facility available for Technical grade and Explosive grades. Test facility is not available for Calcium parameter in special grade. |
| 14241 |
BIS, Northern Regional Laboratory (NRL)
| None
| IS 5135 : Part 2 (1994) |
Specification for hand rotary duster: Part 2 shoulder mounted type (First Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6.0 (Capacity) |
- |
|
|
|
| 8.0 (WORKMANSHIP AND FINISH) |
- |
|
|
|
|
- |
-
- |
| 14242 |
BIS, Northern Regional Laboratory (NRL)
| None
| IS 4366 : Part 2 (1985) |
Specification for agricultural tillage discs: Part 2 flat type (Second Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.0 (HARDNESS) |
- |
|
|
|
| 5.1, Table 1 (Nominal size) |
- |
|
|
|
| 5.1, Table 1 (Thickness) |
- |
|
|
|
| 5.2, Table 2 (Dimension) |
- |
|
|
|
| 5.2, Table 2 (Tolerance) |
- |
|
|
|
| 6.0 (HOLE TYPES) |
- |
|
|
|
| 7.1 (Central Hole) |
- |
|
|
|
| 7.2 (Pitch Circle Diameter -) |
- |
|
|
|
| 7.3 (Fixing Holes) |
- |
|
|
|
| 7.4, Table 3 (Nominal Size) |
- |
|
|
|
| 7.4, Table 3 (Thickness) |
- |
|
|
|
| 7.4, Table 3 (Centre hole diameter) |
- |
|
|
|
| 7.4, Table 3 (Pitch circle diameter) |
- |
|
|
|
| 7.4, Table 3 (No. Of holes) |
- |
|
|
|
| 8.1 (distortion) |
- |
|
|
|
| 8.2 (eccentricity) |
- |
|
|
|
| 8.3 (thickness of the cutting edge) |
- |
|
|
|
| 8.4 (cutting edge of discs) |
- |
|
|
|
| 9.0 (DESIGNATION) |
- |
|
|
|
| 10.0 (WORKMANSHIP AND FINISH) |
- |
|
|
|
|
- |
-
Test facility is complete |
| 14243 |
BIS, Bengaluru Branch Laboratory (BNBL)
| None
| IS 252 (2013) |
Caustic soda - Specification (Fourth Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3 (Form and Description) |
- |
|
|
|
| Cl. 3.3 and 3.4(Table 1, S. no i) (Sodium carbonate (as Na2CO3), percent by mass) |
- |
|
|
|
| Cl. 3.3 and 3.4(Table 1, S. no ii) (Sodium hydroxide (as NaOH), percent by mass) |
- |
|
|
|
| Cl. 3.3 and 3.4(Table 1, S. no iii) (Chlorides (as Cl– ), percent by mass) |
- |
|
|
|
| Cl. 3.3 and 3.4(Table 1, S. no iv) (Sulphates (as SO4), percent by mass) |
- |
|
|
|
| Cl. 3.3 and 3.4(Table 1, S. no v) (Silicates (as SiO2), percent by mass) |
- |
|
|
|
| Cl. 3.3 and 3.4(Table 1, S. no vi) (Iron (as Fe)) |
- |
|
|
|
| Cl. 3.3 and 3.4(Table 1, S. no vii) (Copper) |
- |
|
|
|
| Cl. 3.3 and 3.4(Table 1, S. no viii) (Manganese) |
- |
|
|
|
| Cl. 3.3 and 3.4(Table 1, S. no ix) (Chlorates and per-chlorates) |
- |
|
|
|
| Cl. 3.3 and 3.4(Table 1, S. no x) (Matter insoluble water, percent by mass) |
- |
|
|
|
| Cl. 3.3 and 3.4(Table 1, S. no xii) (Sodium hydroxide) |
- |
|
|
|
| Cl. 3.3 and 3.4(Table 1, S. no xi) (Total mercury) |
- |
|
|
|
|
- |
-
Complete for chemical section. |
| 14244 |
BIS, Northern Regional Laboratory (NRL)
| None
| IS 5135 : Part 1 (1994) |
Specification for hand - Rotary duster: Part 1 belly - Mounted type (Second Revision) |
- |
Testing charges for the product are Rs 7600/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6.0 (Capacity) |
- |
|
|
|
| 8.0 (WORKMANSHIP AND FINISH) |
- |
|
|
|
|
- |
-
Test facility not availabe |
| 14245 |
BIS, Northern Regional Laboratory (NRL)
| None
| IS 2326 (1987) |
Automatic Flushing Cisterns for Urinals (Other than Plastic Cisterns) |
- |
1275 incl endu test + material as per ISS View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.0 (NOMINAL SIZE) |
- |
|
|
|
| 4.2 (Cistern ) |
- |
|
|
|
| 4.3 (Depth of Cistern Body) |
- |
|
|
|
| 4.4 (Siphonic Apparatus) |
- |
|
|
|
| 4.5 (Lid and Cover) |
- |
|
|
|
| 4.6 (Feeding Device -) |
- |
|
|
|
| 5.0 (FINISH) |
- |
|
|
|
| 6.1 (a) (Urinal Delivering capacity) |
- |
|
|
|
| 6.1 (b) (Flushing) |
- |
|
|
|
| 6.1 (c) (Discharge) |
- |
|
|
|
|
- |
-
Complete for Chemical, test facility not available for mechanical |
| 14246 |
BIS, Bengaluru Branch Laboratory (BNBL)
| None
| IS 1065 : Part 1 (2019) |
Stable bleaching powder - Specification: Part 1 household and industrial use (Third Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.2 (Description) |
- |
|
|
|
| 5.3 Table-1 i (Available chlorine) |
- |
|
|
|
| 5.3 Table-1 ii (Stability, loss of
Chlorine on the basis of
initial available chlorine ) |
- |
|
|
|
| 5.3 Table-1 iiii (Moisture, percent by
mass.
) |
- |
|
|
|
| 5.3 Table-1 iv (Particle size (Passing
through 170 mm IS Sieve).
Percent by mass) |
- |
|
|
|
| Clause 5.4 (Keeping Quality ) |
- |
|
|
|
|
- |
-
Complete for chemical section. |
| 14247 |
BIS, Central Laboratory (CL)
| None
| IS 366 (1991) |
Electric iron - Specification (Fourth Revision) |
- |
Rs.12300/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7.0 (Classification (as per Cl.6 of IS 302-2-3 and Cl.6.1 of IS 302-1)) |
- |
|
|
|
| 7.0 (Classification (as per Cl.6 of IS 302-2-3 and Cl.6.2 of IS 302-1)) |
- |
|
|
|
| 9.0 (Protection against access to live parts (as per Cl. 8 of IS 302-2-3 and IS 302-1)) |
- |
|
|
|
| 9.0 (Power input and current (as per Cl. 10 of IS 302-2-3 and IS 302-1)) |
- |
|
|
|
| 9.0 (Temperature Rise (as per Cl. 11 of IS 302-2-3 and IS 302-1)) |
- |
|
|
|
| 9.0 (Temperature Rise (as per Cl. 11 of IS 302-2-3 and IS 302-1)) |
- |
|
|
|
| 9.0 (Temperature Rise (as per Cl. 11 of IS 302-2-3 and IS 302-1)) |
- |
|
|
|
| 9.0 (Temperature Rise (as per Cl. 11 of IS 302-2-3 and IS 302-1)) |
- |
|
|
|
| 9.0 (Leakage current and Electric Strength at Operating Temperature (as per Cl. 13 of IS 302-2-3 and IS 302-1)) |
- |
|
|
|
| 9.0 (Leakage current and Electric Strength at Operating Temperature (as per Cl. 13 of IS 302-2-3 and IS 302-1)) |
- |
|
|
|
| 9.0 (Moisture Resistance (as per of Cl.15 of IS 302-2-3 and IS 302-1)) |
- |
|
|
|
| 9.0 (Moisture Resistance (as per of Cl.15 of IS 302-2-3 and IS 302-1)) |
- |
|
|
|
| 9.0 (Abnormal Operation (as per of Cl.19 of IS 302-2-3 and IS 302-1) ) |
- |
|
|
|
| 9.0 (Abnormal Operation (as per of Cl.19 of IS 302-2-3 and IS 302-1) ) |
- |
|
|
|
| 9.0 (Abnormal Operation (as per of Cl.19 of IS 302-2-3 and IS 302-1) ) |
- |
|
|
|
| 9.0 (Abnormal Operation (as per of Cl.19 of IS 302-2-3 and IS 302-1) ) |
- |
|
|
|
| 9.0 (Abnormal Operation (as per of Cl.19 of IS 302-2-3 and IS 302-1) ) |
- |
|
|
|
| 9.0 (Staibilty and mechanical hazards (as per of Cl.20 of IS 302-2-3 and IS 302-1) ) |
- |
|
|
|
| 9.0 (Mechanical strength (as per of Cl.21 of IS 302-2-3 and IS 302-1) ) |
- |
|
|
|
| 9.0 (Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) ) |
- |
|
|
|
| 9.0 (Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) ) |
- |
|
|
|
| 9.0 (Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) ) |
- |
|
|
|
| 9.0 (Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) ) |
- |
|
|
|
| 9.0 (Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) ) |
- |
|
|
|
| 9.0 (Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) ) |
- |
|
|
|
| 9.0 (Internal wiring (as per of Cl.23 of IS 302-2-3 and IS 302-1) ) |
- |
|
|
|
| 9.0 (Internal wiring (as per of Cl.23 of IS 302-2-3 and IS 302-1) ) |
- |
|
|
|
| 9.0 (Internal wiring (as per of Cl.23 of IS 302-2-3 and IS 302-1) ) |
- |
|
|
|
| 9.0 (Internal wiring (as per of Cl.23 of IS 302-2-3 and IS 302-1) ) |
- |
|
|
|
| 9.0 (Components (as per of Cl.24 of IS 302-2-3 and IS 302-1) ) |
- |
|
|
|
| 9.0 (Supply connection and external flexible cord (as per of Cl.25 of IS 302-2-3 and IS 302-1) ) |
- |
|
|
|
| 9.0 (Supply connection and external flexible cord (as per of Cl.25 of IS 302-2-3 and IS 302-1) ) |
- |
|
|
|
| 9.0 (Supply connection and external flexible cord (as per of Cl.25 of IS 302-2-3 and IS 302-1) ) |
- |
|
|
|
| 9.0 (Supply connection and external flexible cord (as per of Cl.25 of IS 302-2-3 and IS 302-1) ) |
- |
|
|
|
| 9.0 (Terminals for external conductors (as per of Cl.26 of IS 302-2-3 and IS 302-1) ) |
- |
|
|
|
| 9.0 (Provision for earthing (as per of Cl.27 of IS 302-2-3 and IS 302-1) ) |
- |
|
|
|
| 9.0 (Provision for earthing (as per of Cl.27 of IS 302-2-3 and IS 302-1) ) |
- |
|
|
|
| 9.0 (Provision for earthing (as per of Cl.27 of IS 302-2-3 and IS 302-1) ) |
- |
|
|
|
| 9.0 (Provision for earthing (as per of Cl.27 of IS 302-2-3 and IS 302-1) ) |
- |
|
|
|
| 9.0 (Screw and connections (as per of Cl.28 of IS 302-2-3 and IS 302-1)) |
- |
|
|
|
| 9.0 (Screw and connections (as per of Cl.28 of IS 302-2-3 and IS 302-1)) |
- |
|
|
|
| 9.0 (Clearances, creepage distances and solid insulation (as per of Cl.29 of IS 302-2-3 and IS 302-1)) |
- |
|
|
|
| 9.0 (Clearances, creepage distances and solid insulation (as per of Cl.29 of IS 302-2-3 and IS 302-1)) |
- |
|
|
|
| 9.0 (Resistance to Heat and Fire (as per of Cl.30 of IS 302-2-3 and IS 302-1)) |
- |
|
|
|
| 9.0 (Resistance to Rusting (as per of Cl.31 of IS 302-2-3 and IS 302-1)) |
- |
|
|
|
| 10.0 (Measurement of Heating up time) |
- |
|
|
|
| 10.0 (Measurement of Heating up time) |
- |
|
|
|
| 11.0 (Measurement of sole plate temperature) |
- |
|
|
|
| 11.0 (Measurement of sole plate temperature) |
- |
|
|
|
| 11.0 (Measurement of sole plate temperature) |
- |
|
|
|
| 11.0 (Measurement of sole plate temperature) |
- |
|
|
|
| 12.0 (Measurement of Tempearture Distribution) |
- |
|
|
|
| 13.0 (Measurement of Initial overswing temperature and Heating up excess temperature) |
- |
|
|
|
| 13.0 (Measurement of Initial overswing temperature and Heating up excess temperature) |
- |
|
|
|
| 14.0 (Measurement of Cyclic fluctuation of temperature of hottest point ) |
- |
|
|
|
| 16.0 (Measurement of Thermostatic staibility) |
- |
|
|
|
| 16.0 (Measurement of Thermostatic staibility) |
- |
|
|
|
| 16.0 (Measurement of Thermostatic staibility) |
- |
|
|
|
| 16.0 (Measurement of Thermostatic staibility) |
- |
|
|
|
| 16.0 (Measurement of Thermostatic staibility) |
- |
|
|
|
| 9.0 (Temperature Rise (as per Cl. 11 of IS 302-2-3 and IS 302-1)) |
- |
|
|
|
| 9.0 (Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) ) |
- |
|
|
|
| 6 (Measurement of Thermostatic staibility) |
- |
|
|
|
|
- |
-
Exclusion : except Cordless Iron & Electronic circuit type iron(Cl.19.11 of IS 302 part 1), Steam iron with water reservoir |
| 14248 |
BIS, Northern Regional Laboratory (NRL)
| None
| IS 513 : Part 1 (2016) |
Cold reduced carbon steel sheet and strip: Part 1 cold forming and drawing purpose (Sixth Revision) |
- |
Rs.8850/- Excluding Tensile Strain Hardening component View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 8 (Mechanical and Physical Properties) |
- |
|
|
|
| Cl 8 (UTM) |
- |
|
|
|
| Cl 9 (Workmanship) |
- |
|
|
|
| Cl 10 (Workmanship) |
- |
|
|
|
| Cl 11 (Length, Width & Thickness) |
- |
|
|
|
| 7.0 (CARBON) |
- |
|
|
|
| 7.0 (SULPHUR) |
- |
|
|
|
| 7.0 (SILICON) |
- |
|
|
|
| 7.0 (MANGANESE) |
- |
|
|
|
| 7.0 (PHOSPHORUS) |
- |
|
|
|
| 7.0 (NITROGEN) |
- |
|
|
|
| Cl. 11 (Out of square) |
- |
|
|
|
| Cl. 11 (Flatness) |
- |
|
|
|
| Cl. 11 (Camber) |
- |
|
|
|
| Cl. 11 (Width) |
- |
|
|
|
| Cl. 11 (Thickness) |
- |
|
|
|
| Cl. 8.4 (Bend Test) |
- |
|
|
|
| Cl. 8.3 Table 6 (Hardness Test
( Only for CR0 & CR1)) |
- |
|
|
|
| Cl. 8.1 & Table
5A, 5B & 5C (Elongation at 80 mm gauge length) |
- |
|
|
|
| Cl. 8.1 & Table
5A, 5B & 5C (Elongation at 50 mm gauge length) |
- |
|
|
|
| Cl. 8.1 & Table
5A, 5B & 5C (Yield Stress) |
- |
|
|
|
| Cl. 9 Table 8 (Surface roughness) |
- |
|
|
|
| 7.0 (ALUMINIUM) |
- |
|
|
|
| 7.0 (MICRO ALLOYS) |
- |
|
|
|
|
- |
-
Excluding Finish (9.5), |
| 14249 |
BIS, Bengaluru Branch Laboratory (BNBL)
| None
| IS 15410 (2003) |
Containers for packaging of natural mineral water and packaged drinking water - Specification |
- |
5850 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.6.2 (TRANSPARANCY) |
- |
|
|
|
| 4.6.3 (LEAKAGE TEST) |
- |
|
|
|
| 4.6.4 (DROP TEST) |
- |
|
|
|
| 4.6.6 (PORTABILITY TEST) |
- |
|
|
|
| 4.6.6 (chem) (Water Potability test (after 30 days) (a) Taste (b) Odour) |
- |
|
|
|
| 4.6.4, clause 8 of IS:2798:1998 (Drop test ) |
- |
|
|
|
| 4.6.3, clause 6 of IS:2798:1998 (Leakage test- c. Air pressure leakage) |
- |
|
|
|
| 4.6.3, clause 6 of IS:2798:1998 (Leakage test- b. Vibration leakage) |
- |
|
|
|
| 4.6.3, clause 6 of IS:2798:1998 (Leakage test- a. Closure leakage ) |
- |
|
|
|
| 4.6.2.1, Annex A (Transparency (Blue tint in polycarbonate & PET containers of 5 litre and above capacity)) |
- |
|
|
|
| 4.6.2 Annex A (Transparency) |
- |
|
|
|
| 4.5, IS:2798:1998 (Wall thickness- Bottom, in mm) |
- |
|
|
|
| Cl. 4.5 (Cl. 4.5 Wall Thickness (Middle)) |
- |
|
|
|
| Cl. 4.5 (Cl. 4.5 Wall Thickness (Top)) |
- |
|
|
|
| Cl. 4.4 (a) (Capacity) |
- |
|
|
|
| 4.3 (Workmanship, Finish & Appearance) |
- |
|
|
|
| 4.2 (Design, Shape & Dimension ) |
- |
|
|
|
| Cl. 4.5 (Cl. 4.5 Wall Thickness (Bottom)) |
- |
|
|
|
| Cl. 4.5 (Cl. 4.5 Wall Thickness (Middle)) |
- |
|
|
|
| Cl. 4.5 (Cl. 4.5 Wall Thickness (Top)) |
- |
|
|
|
| Cl. 4.4 (a) (Capacity) |
- |
|
|
|
| Cl. 4.3.2 (Cl. 4.3.2 Finish & Appearance) |
- |
|
|
|
| Cl. 4.2 (Cl. 4.2 Design, Shape & Dimension) |
- |
|
|
|
| Cl. 4.6.3 (Cl. 4.6.3 Air Pressure Leakage) |
- |
|
|
|
| Cl. 4.6.3 (Cl. 4.6.3 Vibration Leakage) |
- |
|
|
|
| Cl. 4.6.3 ( Cl. 4.6.3 Closure Leakage) |
- |
|
|
|
| 4.6.2.1, Annex-A (Transparency of container) |
- |
|
|
|
| 4.6.5.1 (chem) (Colour migration (Caps)) |
- |
|
|
|
| 4.6.5.1 (chem) (Colour migration (Container)) |
- |
|
|
|
| 4.6.5 , IS:9845:1998 (chem) (Migration of Caps - a. Amount of extractive) |
- |
|
|
|
| 4.6.5 , IS:9845:1998 (chem) (Migration- b. Amount of extractive) |
- |
|
|
|
| Cl.4.6.7.2 and 4.6.7.3, Table 3, (i) (Barium) |
- |
|
|
|
| Cl.4.6.7.2 and 4.6.7.3, Table 3, (ii) (Cobalt) |
- |
|
|
|
| Cl.4.6.7.2 and 4.6.7.3, Table 3, (iii) (Copper) |
- |
|
|
|
| CL 4.6.7.2 and 4.6.7.3, Table 3 (iv) (Iron) |
- |
|
|
|
| Cl.4.6.7.2 and 4.6.7.3, Table 3, (v) (Lithium) |
- |
|
|
|
| Cl.4.6.7.2 and 4.6.7.3, Table 3, (vi) (Manganese) |
- |
|
|
|
| Cl.4.6.7.2 and 4.6.7.3, Table 3, (vii) (Zinc) |
- |
|
|
|
| Cl.4.6.7.2 and 4.6.7.3, Table 3, (viii) (Antimony) |
- |
|
|
|
|
- |
-
Test facility not available for Pthalates |
| 14250 |
BIS, Northern Regional Laboratory (NRL)
| None
| IS 739 (1992) |
Wrought aluminium and aluminium alloys - Wire for general engineering purposes - Specification (Third Revision) |
- |
Rs.225/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6.0 (Freedom from defects) |
- |
|
|
|
| 7.0 (Dimension and Tolerances) |
- |
|
|
|
| 9.1 (Tensile Strength) |
- |
|
|
|
| 9.3 (Wrapping Test) |
- |
|
|
|
| 6.0 (Freedom from defects) |
- |
|
|
|
| 15.4 (b) (Cold impact) |
- |
|
|
|
| 9.1 (PIPE ENDS) |
- |
|
|
|
| 6.0 (Freedom from defects) |
- |
|
|
|
| 15.4 (b) (Cold impact) |
- |
|
|
|
| 9.1 (PIPE ENDS) |
- |
|
|
|
|
- |
-
Facility for Chemical tests not available |
