BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15123 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

14251

BIS, Southern Regional Laboratory (SRL)

None

IS 4947 (2006)

Foam concentrate for producing mechanical foam for fire fighting - Specification (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 3 (General Requirements)	-
Cl 8 (Finish)	-

-
" 2 no. " Excluding hydraulic & burst pressure tests and chem tests

14252

BIS, Southern Regional Laboratory (SRL)

None

IS 3039 (1988)

Specification for structural steel for construction of hulls of ships (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5 (Freedom from defects)	-
10.2 (Tensile Test-1608:Part 1)	-
10.2 (Yield Stress, Mpa)	-
10.2 (Elongation, %)	-
12 and 13 (Dimensions and Tolerances)	-

-
" mech - 1 m Excluding except impact test and Chemical tests

14253

BIS, Southern Regional Laboratory (SRL)

None

IS 4948 (2020.0)

Welded steel wire fabric for general use - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 5.1 (MANUFACTURE OF MESH (Assembling of Wires))	-
Cl. 5.2 (MANUFACTURE OF MESH)	-
Cl. 5.3 (MANUFACTURE OF MESH)	-
Cl. 5.4 (Spacing of Longitudinal and Transverse Wires)	-
Cl. 5.5 (Tolerance of Size of Mesh)	-
Cl. 5.6 (Tolerance of Size of Sheet or Roll)	-
Cl. 9.1 (Marking)	-
Cl. 9.3 (BIS Certification Marking)	-
Cl. 10.1 (Finish)	-

-
1mt Excluding excl shear strength test & chemical tests

14254

BIS, Eastern Regional Laboratory (ERL)

None

IS 15961 (2012)

Hot dip aluminium - Zinc alloy metallic coated steel strip and sheet (Plain)

For all grades

Rs.4990/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 9 & Table 2 (Workmanship)	-
Cl 10 (Coating Adhesion )	-
Cl 11 (Workmanship)	-
Cl 12 (Weight)	-
Cl 13 (Length, Width, Thickness, Camber, Deviation From Squareness & Deviation From Flatness)	-
4, 5 (CARBON)	-
Cl-13.3 (Width Tolerance)	-
Cl-13.4 (Thickness Tolerance)	-

-
Mech: Complete Chemical: Except Al, Ti, Nb and V

14255

BIS, Eastern Regional Laboratory (ERL)

None

IS 6006 (2014)

Uncoated stress relieved strand for prestressed concrete - Specification (Second Revision)

For all designation except tests mentioned in remarks

Rs 4035/- Excluding Proof Stress and Relaxation Test View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 4 (Length )	-
Cl 4.5 (Workmanship)	-
Cl 4.5 (Workmanship)	-
Cl 4.5 (Workmanship)	-
Cl 4.5 (Workmanship)	-
Cl 5, Table 1 (Diameter)	-
Cl 5, Table 1 (Diameter)	-
Cl 5, Table 1 (Weight)	-
Cl 7.1 (Tensile Test On UTM)	-
Cl 7 (Tensile Test On UTM)	-
4.1.2 (sulphur)	-
4.1.2 (phosphorus)	-
Cl 5.1 (Average Diameter (08))	-
CL 5.1 (Average Nominal cross-sectional area (09))	-

-
Facility not available for Stress Relaxation test

14256

BIS, Central Laboratory (CL)

None

IS 3205 (1984)

Specification for precipitated barium carbonate, technical (First Revision)

Rs 1575/- Grade 1; Rs 1125/- for Gr 2 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2, Table 1 and Appendix A-2 of IS 3205 (Barium (as Ba ) - for All Grades)	-
3.2, Table 1 and Appendix A-4 of IS 3205 (Moisture - For Grade 1 )	-
3.2, Table 1 and Appendix A-4 of IS 3205 (Moisture - For Grade 2)	-
3.2, Table 1 and Appendix A-5 of IS 3205 (Matter insolubile in hydrochloric acid - For Grade 1)	-
3.2, Table 1 and Appendix A-5 of IS 3205 (Matter insolubile in hydrochloric acid - For Grade 2)	-
3.2, Table 1 and Appendix A-6 of IS 3205 (Free Alkali - For Grade 2)	-
3.2, Table 1 and Appendix A-7 of IS 3205 (Water Soluble Sulphide ( as BaS ) -For Grade 1)	-
3.2, Table 1 and Appendix A-7 of IS 3205 (Water Soluble Sulphide ( as BaS ) -For Grade 2)	-
3.2, Table 1 and Appendix A-8 of IS 3205 (Total Sulphur ( as SO4 ) - For Grade 1)	-
3.2, Table 1 and Appendix A-9 of IS 3205 (Alkali and other metasulphates ( as BaSO4 ) - For Grade 1 )	-
3.2, Table 1 and Appendix A-9 of IS 3205 (Alkali and other metasulphates ( as BaSO4 ) - For Grade 2)	-
3.2, Table 1 and Appendix A-10 of IS 3205 (Sodium Oxides ( as NaO2 ) - For Grade 1)	-
3.2, Table 1 and Appendix A-11 of IS 3205 (Iron ( as Fe2O3) - For Grade 1)	-
3.2, Table 1 and Appendix A-11 of IS 3205 (Iron ( as Fe2O3) - For Grade 2)	-
3.2, Table 1 and Appendix A-12 of IS 3205 (Tap Density - For Grade 1)	-
3.2, Table 1 and Appendix A-13 of IS 3205 (Residue retained on 63 micron IS sieve - For Grade 1)	-
3.2, Table 1 and Appendix A-14 of IS 3205 (Reaction efficiency ( after 45 minutes ) - For Grade 2)	-

-
-

14257

BIS, Central Laboratory (CL)

None

IS 11587 (1986)

Specification for structural weather resistant steels

- View breakup
Testing Charges for Mechanical testing for the product is: Rs 5600/- (rounded off to nearest Rs 50/-) Testing charges for Chemical parameters in Table 1 is Rs. 8600/- (rounded off to nearest 50/-).

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 5.1, Table -1 (WR-Fe 480 A, C )	-
Clause 5.1, Table -1 (WR-Fe 480 A, S )	-
Clause 5.1, Table -1 (WR-Fe 480 A, P )	-
Clause 5.1, Table -1 (WR-Fe 480 B, Mn)	-
Clause 5.1, Table -1 (WR-Fe 480 B, Si)	-
Cl 8 (Tensile Test)	-
Cl 9 (Bend Test)	-
Cl 10 (Impact Test)	-
Cl 11 (Flattening Test)	-
Cl 12 (Freedom from Defects)	-
Cl 13 (Dimensions)	-
Cl 16 (Mass)	-

-
-

14258

BIS, Central Laboratory (CL)

None

IS 5516 (1996)

Variable flow type air - Permeability apparatus (Blaine Type) - Specification

Rs.1500.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 (DIMENSIONS)	-
6.1 (PARTS AND ACCESSORIES-Permeability Cell-Inside Dia)	-
6.1 (PARTS AND ACCESSORIES-Permeability Cell-Bottom end Length)	-
6.2 (PARTS AND ACCESSORIES-Perforated Disc-Thickness)	-
6.2 (PARTS AND ACCESSORIES-Perforated Disc-No. of holes)	-
6.3 (PARTS AND ACCESSORIES-Plunger-Clearance)	-
6.3 (PARTS AND ACCESSORIES-Plunger-Clearance-distance between the bottom of the plunger and the top surface)	-
6.5 (PARTS AND ACCESSORIES-Manometer-Dia )	-

-
Excluding -; Internal wall of the cell shall be smooth ,true and vertical with a finish of 0.8 micron,Filter paper disc

14259

BIS, Eastern Regional Laboratory (ERL)

None

IS 8042 (2015)

White portland cement - Specification (Third Revision)

Rs 12050/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5 - Table - 1 i (Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-
5 - Table - 1 i (Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-
5 - Table - 1 ii (Iron oxide - Cl 4.5 of IS 4032:1985)	-
5 - Table - 1 ii (Iron oxide - Cl 4.5 of IS 4032:1985)	-
5 - Table - 1 iii (Insoluble residue - Cl 4.10 of IS 4032:1985)	-
5 - Table - 1 iii (Insoluble residue - Cl 4.10 of IS 4032:1985)	-
5 - Table - 1 iv (Magnesia - Cl 4.8 of IS 4032:1985)	-
5 - Table - 1 iv (Magnesia - Cl 4.8 of IS 4032:1985)	-
5 - Table - 1 v (Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-
5 - Table - 1 v (Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-
5 - Table - 1 vi (Loss on ignition - Cl 4.2 of IS 4032:1985)	-
5 - Table - 1 vi (Loss on ignition - Cl 4.2 of IS 4032:1985)	-
5 - Table - 1 vii (Chloride content - Cl 4.13 of IS 4032:1985)	-
5 - Table - 1 vii (Chloride content - Cl 4.13 of IS 4032:1985)	-
6 -Table 2- i (Fineness 4031 Part 2)	-
6 -Table 2- ii- a (Expansion by Le Chatelier- 4031 Part 3)	-
6 -Table 2- ii- a (Expansion after aeration - 4031 Part 3)	-
6 -Table 2- ii- b (Expansion by Autoclave- 4031 Part 3)	-
6-Table 2- ii- b (Expansion after aeration- 4031 Part 3)	-
6 -Table 2- iii- a (Setting Time Initial- 4031 Part 5)	-
6 -Table 2-iii- b (Setting Time Final- 4031 Part 5)	-
6 -Table 2- iv- a (Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-
6 -Table 2- iv- b (Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-
6 -Table 2- iv- c (Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-
6 -Table 2- v (Transverse Strength - IS 4031 Part 8 (Optional))	-
6 -Table 2- vi (Degree of whiteness-Annex B)	-

-
Facility not available for transverse test(Optional)

14260

BIS, Central Laboratory (CL)

None

IS 280 (2006)

Mild steel wire for general engineering purposes (Fourth Revision)

Rs.3750.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 7 & Table 1 (Diameter & Difference Between Two Reading On Any Two Diameters)	-
Cl 9 (Tensile Test On UTM)	-
Cl 11 (Workmanship)	-
Cl 13 (Workmanship)	-
6 AND AS PER IS 7887 (CARBON)	-
6 AND AS PER IS 7887 (SULPHUR)	-
6 AND AS PER IS 7887 (PHOSPHORUS)	-
6 AND AS PER IS 7887 (MANGANESE)	-
6 AND AS PER IS 7887 (SILICON)	-
6 AND AS PER IS 7887 (ALUMINIUM)	-
6 AND AS PER IS 7887 (MICRO ALLOY)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm;

14261

BIS, Southern Regional Laboratory (SRL)

None

IS 2879 (1998)

Mild steel for metal arc welding electrodes - Specification (Third Revision)

Testing charges are Rs.9050/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 7 (Workmanship)	-
Cl 8 & 9 (Diameter)	-

-
" 1 mt + 50 gm Excluding excluding chemical tests

14262

BIS, Central Laboratory (CL)

None

IS 11169 : Part 2 (1989)

Steels for cold heading/cold extrusion applicationsspecification: Part 2 stainless steels

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1,6.2 Table 2 (Carbon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
6.1,6.2 Table 2 (Silicon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
6.1,6.2 Table 2 (Manganese- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
6.1,6.2 Table 2 (Nickel- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
6.1,6.2 Table 2 (Chromium- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
6.1,6.2 Table 2 (Molybdenum- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
6.1,6.2 Table 2 (Sulphur- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
6.1,6.2 Table 2 (Phosphorous- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
6.1,6.2 Table 2 (Other(Titanium)- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm;

14263

BIS, Northern Regional Laboratory (NRL)

None

IS 2082 (2018)

Stationary storage type electric water heaters - Specification (Fifth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6 (Classification )	-
6 (Classification )	-
7 (Marking)	-
7 (Marking)	-
7 (Marking)	-
7 (Marking)	-
7 (Marking)	-
7 (Marking)	-
7 (Marking)	-
7 (Marking)	-
7 (Marking)	-
7 (Marking)	-
7 (Marking)	-
7 (Marking)	-
7 (Marking)	-
7 (Marking)	-
7 (Marking)	-
7 (Marking)	-
7 (Marking)	-
7 (Marking)	-
7 (Marking)	-
7 (Marking)	-
7 (Marking)	-
7 (Marking)	-
7 (Marking)	-
7 (Marking)	-
7 (Marking)	-
7 (Marking)	-
7 (Marking)	-
(Cl.8 of IS 302-2-21:2011) (Protection Against Access to Live Parts)	-
(Cl.10 of IS 302-2-21: 2011) (Power Input & Current)	-
(Cl.11 of 302-2-21:2011) (Heating)	-
(Cl.11 of 302-2-21:2011) (Heating)	-
(Cl.13 of IS 302-2-21:2011) (Leakage Current )	-
(Cl.15 of IS 302-2-21-2011) (Moisture Resistance)	-
(Cl.15 of IS 302-2-21-2011) (Moisture Resistance)	-
(Cl.15 of IS 302-2-21-2011) (Moisture Resistance)	-
(Cl.19 of IS 302-2-21:2011) (Abnormal Operation)	-
(Cl.19 of IS 302-2-21:2011) (Abnormal Operation)	-
(Cl.19 of IS 302-2-21:2011) (Abnormal Operation)	-
(Cl.19 of IS 302-2-21:2011) (Abnormal Operation)	-
(Cl.20 of IS 302-2-21:2011) (Stability & Mechanical Hazards)	-
(Cl.21ofIS302-2-21:2011) (Mechanical strength)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl.22 Of IS 302-2-21:2011) (Construction)	-
(Cl. 23 of IS 302-2-21: 2011) (Internal Wiring )	-
(Cl. 23 of IS 302-2-21: 2011) (Internal Wiring )	-
(Cl. 23 of IS 302-2-21: 2011) (Internal Wiring )	-
(Cl. 23 of IS 302-2-21: 2011) (Internal Wiring )	-
(Cl. 23 of IS 302-2-21: 2011) (Internal Wiring )	-
(Cl. 23 of IS 302-2-21: 2011) (Internal Wiring )	-
(Cl. 23 of IS 302-2-21: 2011) (Internal Wiring )	-
(Cl. 23 of IS 302-2-21: 2011) (Internal Wiring )	-
(Cl. 23 of IS 302-2-21: 2011) (Internal Wiring )	-
(Cl. 23 of IS 302-2-21: 2011) (Internal Wiring )	-
(Cl.24ofIS302-221:2011) (Component)	-
(Cl.24ofIS302-221:2011) (Component)	-
(Cl. 23 of IS 302-2-21: 2011) (Internal Wiring )	-
(Cl.24ofIS302-221:2011) (Component)	-
(Cl.24ofIS302-221:2011) (Component)	-
(Cl.24ofIS302-221:2011) (Component)	-
(Cl.25 of IS 302-2-21:2011) (Supply Connection & External Flexible Cords)	-
(Cl.25 of IS 302-2-21:2011) (Supply Connection & External Flexible Cords)	-
(Cl.25 of IS 302-2-21:2011) (Supply Connection & External Flexible Cords)	-
(Cl.25 of IS 302-2-21:2011) (Supply Connection & External Flexible Cords)	-
(Cl.25 of IS 302-2-21:2011) (Supply Connection & External Flexible Cords)	-
(Cl.25 of IS 302-2-21:2011) (Supply Connection & External Flexible Cords)	-
(Cl.25 of IS 302-2-21:2011) (Supply Connection & External Flexible Cords)	-
(Cl.25 of IS 302-2-21:2011) (Supply Connection & External Flexible Cords)	-
(Cl.25 of IS 302-2-21:2011) (Supply Connection & External Flexible Cords)	-
(Cl.25 of IS 302-2-21:2011) (Supply Connection & External Flexible Cords)	-
(Cl.25 of IS 302-2-21:2011) (Supply Connection & External Flexible Cords)	-
(Cl.25 of IS 302-2-21:2011) (Supply Connection & External Flexible Cords)	-
(Cl.25 of IS 302-2-21:2011) (Supply Connection & External Flexible Cords)	-
(Cl.25 of IS 302-2-21:2011) (Supply Connection & External Flexible Cords)	-
(Cl.25 of IS 302-2-21:2011) (Supply Connection & External Flexible Cords)	-
(Cl.25 of IS 302-2-21:2011) (Supply Connection & External Flexible Cords)	-
(Cl.26 of IS 302-2-21: 2011) (Terminals for External Conductors)	-
(Cl.26 of IS 302-2-21: 2011) (Terminals for External Conductors)	-
(Cl.26 of IS 302-2-21: 2011) (Terminals for External Conductors)	-
(Cl.26 of IS 302-2-21: 2011) (Terminals for External Conductors)	-
(Cl.26 of IS 302-2-21: 2011) (Terminals for External Conductors)	-
(Cl.26 of IS 302-2-21: 2011) (Terminals for External Conductors)	-
(Cl.26 of IS 302-2-21: 2011) (Terminals for External Conductors)	-
(Cl.26 of IS 302-2-21: 2011) (Terminals for External Conductors)	-
(Cl.26 of IS 302-2-21: 2011) (Terminals for External Conductors)	-
(Cl.26 of IS 302-2-21: 2011) (Terminals for External Conductors)	-
(Cl.27 of IS 302-2-21:2011) (Provision for Earthing)	-
(Cl.27 of IS 302-2-21:2011) (Provision for Earthing)	-
(Cl.27 of IS 302-2-21:2011) (Provision for Earthing)	-
(Cl.27 of IS 302-2-21:2011) (Provision for Earthing)	-
(Cl.27 of IS 302-2-21:2011) (Provision for Earthing)	-
(Cl.27 of IS 302-2-21:2011) (Provision for Earthing)	-
(Cl.28 of IS 302-2-21:2011) (Screws & Connections)	-
(Cl.29ofIS302-2-21:2011) (Clearances, Creepage Distances and Solid Insulation)	-
(Cl.30 of IS 302-2-21:2011) (Resistance to Heat & Fire)	-
(Cl.30 of IS 302-2-21:2011) (Resistance to Heat & Fire)	-
(Cl.31 of IS 302-2-21:2011) (Resistance to Rusting)	-
(Cl.15 of IS 2082:2018) (Verification of the Rated Capacity)	-
(Cl.16 of IS 2082:2018) (Standing Loss per 24 Hours)	-
(Cl.17 of IS 2082:2018) (Hot Water Output)	-
(Cl.18 of IS 2082:2018) ( Reheating Time)	-
(Cl.19 of IS 2082:2018) (Mixing Factor)	-
(Cl.20 of IS 2082:2018) (Deviation of Dial Calibration)	-
(Cl.21 of IS 2082:2018) (Cyclic Temperature Variation)	-
(Cl.22 of IS 2082:2018) (Finish)	-

-
Excluding Cl.24.102.1 and Cl.24.102.2 Electronic circuit and Software evaluation Cl. 19.11 and Cl. 19.12 abnormal test (for Electronic circuit)

14264

BIS, Central Laboratory (CL)

None

IS 8749 (2002)

Biogas stove - Specification (Second Revision)

Rs. 4590/ View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1.1 (Materials)	-
5.3 (Materials)	-
7 (Rigidity and stability)	-
8.1 (Gas taps)	-
8.2 (Gas taps)	-
8.3 (Gas taps)	-
8.4 (Gas taps)	-
8.6 (Gas taps)	-
5.1 (Materials)	-
5.2 (Materials)	-
5.5 (Materials)	-
6.5 (Design for Maintenance)	-
6.6 (Design for Maintenance)	-
9.1 (Finishes)	-
10.1 (Injector Jets)	-
10.1.1 (Injector Jets)	-
10.2 (Injector Jets)	-
11.1 (Burners)	-
11.2 (Burners)	-
11.3 (Burners)	-
11.4 (Burners)	-
11.5 (Burners)	-
12.1 (Pan Support)	-
12.1.1 (Pan Support)	-
13.1.1 (GAS INLET CONNECTIONS)	-
13.1.2 (GAS INLET CONNECTIONS)	-
13.2 (GAS INLET CONNECTIONS)	-
14 (GAS SOUNDNESS)	-
15 (STRENGTH TEST)	-

-
Exclusion "-; 8.11 Gas taps, (Cl.17) -GAS CONSUMPTION,(Cl.18)-IGNITION AND FLAME TRAVEL, (Cl.19) - FLAME STABILITY , (Cl.20) - NOISE CONTROL, (Cl.21) - FORMATION OF SOOT, (Cl.22) - FLASH BACK , (Cl.23) - COMBUSTION, (Cl.24) a) - SURFACE TEMPERATURE,(Cl.25) -THERMAL EFFICIENCY,"

14265

BIS, Central Laboratory (CL)

None

IS 10632 : Part 2 (1983)

Specification for non magnetic stainless steels for electrical applications: Part 2 specific requirements for binding wires

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Carbon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
3.1 (Sulphur- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
3.1 (Phosphorous- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
3.1 (Manganese- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
3.1 (Nickel- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm; Exclusion Except Ni as per Cl 3.1;

14266

BIS, Central Laboratory (CL)

None

IS 5514 (1996)

Specification Apparatus Used in `Le-chatelier' Test

s.1200.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2 (CONSTRUCTION-Thickness)	-
2 (CONSTRUCTION-Internal Dia.)	-
2 (CONSTRUCTION-Height)	-
2 (CONSTRUCTION-Distance between ended)	-
2 (CONSTRUCTION-cover plate Weight)	-
3-Table 1 (DIMENSIONS-Outer side of the mould to the end of the indicator)	-
3-Table 1 (DIMENSIONS-Internal diameter of the mould)	-
3-Table 1 (DIMENSIONS-wall thickness of the mould)	-
3-Table 1 (DIMENSIONS-Split)	-

-
-

14267

BIS, Southern Regional Laboratory (SRL)

None

IS 280 (2006)

Mild steel wire for general engineering purposes (Fourth Revision)

Rs.3750.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 9 (Tensile Test On UTM)	-
Cl 13 (Workmanship)	-
Cl 7 & Table 1 (Diameter & Difference Between Two Reading On Any Two Diameters)	-
6 AND AS PER IS 7887 (MICRO ALLOY)	-
6 AND AS PER IS 7887 (ALUMINIUM)	-
6 AND AS PER IS 7887 (PHOSPHORUS)	-
6 AND AS PER IS 7887 (SULPHUR)	-
6 AND AS PER IS 7887 (MANGANESE)	-
6 AND AS PER IS 7887 (SILICON)	-
6 AND AS PER IS 7887 (CARBON)	-
Clause 6 and Note 3 of IS 7887 (Copper)	-

-
" 3 m+ 50gm " Chemical Facility is available Quantity: 5 Pieces of 5cm X 5cm Excluding Mech-C /

14268

BIS, Central Laboratory (CL)

None

IS 11169 : Part 1 (1984)

Specification for steels for cold heading/cold extrusion applications: Part 1 wrought carbon and low alloy steels

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 6 (Diameter & Out Of Roundness)	-
Cl 6 (Diameter & Out Of Roundness)	-
Cl 6 (Diameter & Out Of Roundness)	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3) ( CARBON)	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3) (SULPHUR)	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3) (PHOSPHURS)	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3) (MANGANESE)	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3) (SILICON)	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3) ( ALUMINIUM)	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3) (NITROGEN)	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3) (Nickel)	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3) (Chromium)	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3) (Molybdenum)	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3) (NIOBIUM)	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3) (VANADIUM)	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3) (TITANIUM)	-
TABLE-1,2,3 (Clause 4,4.1,4.2,4.3) (TIN)	-

-
sample of 5 cutpc having dia > 3mm and thickness > 0.8 mm shall be provided. Grade/designation of material of component as per Cl. 7 of IS 111169(P-1):2022 has to be declraed.; Excluding -; Cl 7 - Freedom From Deects, Cl 10 - Metturgical Properties, Cl 11 - Hardenability

14269

BIS, Southern Regional Laboratory (SRL)

None

IS 5484 (1997)

Ec grade aluminium rod produced by continuous casting and rolling - Specification (Second Revision)

Rs.3240.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
10.1 (Diameter - IS:5484)	-
8-Table-1 (Tensile Strength - IS:1608)	-
9 (Resistyvity at 20 degree C -IS:398(P-2))	-
11.1 (Joint- IS:5484)	-
12.2 (Finish - IS:5484)	-

-
" 3 m Excluding chem facility not available.

14270

BIS, Central Laboratory (CL)

None

IS 10631 (1983)

Specification for stainless steel for welding electrode core wire

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 Table 1 (Carbon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
5.1 Table 1 (Sulphur- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
5.1 Table 1 (Phosphorous- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
5.1 Table 1 (Manganese- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
5.1 Table 1 (Silicon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
5.1 Table 1 (Chromium- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
5.1 Table 1 (Nickel- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
5.1 Table 1 (Molybdenum- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
6 (FREEDOM FROM DEFECTS)	-
7 (Size and Tolerances)	-
Clause 5.1 (Carbon)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm. Grade/Designation as per Table 1 may also be declared.;

14271

BIS, Central Laboratory (CL)

None

IS 9516 (1980)

Specification for heat resisting steels

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1,5.2,5.3 Table 4 (Carbon-Relevant parts of IS 228)	-
5.1,5.2,5.3 Table 4 (Sulphur-Relevant parts of IS 228)	-
5.1,5.2,5.3 Table 4 (Phosphorous-Relevant parts of IS 228)	-
5.1,5.2,5.3 Table 4 (Manganese-Relevant parts of IS 228)	-
5.1,5.2,5.3 Table 4 (Nitrogen-Relevant parts of IS 228)	-
4 (FREEDOM FROM DEFECTS)	-
6, Table 2 (i) Yield stess/.2% Proof stress, Mpa)	-
6, Table 2 (ii)Ultimate Tensile Strength, Mpa)	-
6, Table 2 (iii)Elongation, %)	-
6, Table 2 (iv) Hardness, HBW)	-
7 (DIMENSIONS AND TOLERANCE)	-
5.1,5.2,5.3 Table 4 (Silicon-Relevant parts of IS 228)	-
5.1,5.2,5.3 Table 4 (Nickel-Relevant parts of IS 228)	-
5.1,5.2,5.3 Table 4 (Chromium-Relevant parts of IS 228)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm. Grade/Designation as per Table 4 may also be declared.; Excluding -; Cl 4.1 Internal Defacts, Cl 6.2 0.2% Proof Stress, Cl 8.2.2 Tests pieces prparation

14272

BIS, Northern Regional Laboratory (NRL)

None

IS 8462 (1977)

Specification for sterilizer, portable, vertical, pressure type

For sterilizers with painted steel stand Rs.9580/-. For View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Shape and Dimensions)	-
4.2 (Thickness)	-
5.8 (Construction)	-
6.1 (Workmanship and Finish)	-
6.2 (Workmanship and Finish)	-
8.1 (Proof Pressure Test)	-

-
Mechanical: Test facility is complete, Facility for chemical test is not available

14273

BIS, Southern Regional Laboratory (SRL)

None

IS 5489 (1975)

Specification for carburizing steels for use in bearing industry (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7 ( HARDNESS)	-
11.3 (i) Tolerance on Length -IS : 3739-1972)	-
11.4 (ii)Tolerance on Straightness)	-
12 ( SIZE AND WEIGHT OF WIRE AND WIRE ROD)	-

-
" 2 x 1 m " Excluding except inclusion content, Grain size and Chemical tests

14274

BIS, Central Laboratory (CL)

None

IS 9476 (1980)

Specification for cold-rolled steel strips for carbon steel razor blades

525 for Physical + carbide density test View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Carbon- IS 228)	-
4.1 (Manganese- IS 228)	-
4.1 (Silicon- IS 228)	-
4.1 (Sulphur- IS 228)	-
4.1 (Phosphorous- IS 228)	-
4.1 (Chromium- IS 228)	-
4.1 (Sulphur+Phosphorous- IS 228)	-
3.1 (Nitrogen- IS 228)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm;

14275

BIS, Central Laboratory (CL)

None

IS 10212 : Part 1 (1986)

General requirements of packages for explosives: Part 1 coommercial high explosives (First Revision)

900 View breakup
Rs. 900/- excluding bursting strength.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.5.3.1, 5.4.1, 5.4.2 - Table 2 - i) (Bursting Strength)	-
Cl.5.3.1, 5.4.1, 5.4.2 - Table 2 - ii) (Water Absorption Cobb/30 min )	-

-
-

14276

BIS, Central Laboratory (CL)

None

IS 4824 (2006)

Bead wire for tyres - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 7 & Table 3 (UTM)	-
Cl 8 (Torsion)	-
Cl 9 (Press)	-
Cl 11 (Weight)	-
Cl 13 (Workmanship)	-
Cl 14 (Diameter)	-

-
Only C & S can be tested for dia < 3mm; Excluding test facility not available for diameter < 3 mm for element other than C & S; i) Adhesion Test (As per Annex A) ii) Coating weight (As per annex B-1)

14277

BIS, Southern Regional Laboratory (SRL)

None

IS 2681 (1993)

Non - Ferrous metal sliding door bolts (Aldrops) for use with padlocks - Specification (Third Revision)

1500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 8.1 (Brass sliding door bolts shall have satin finish or shall be polished or plated as specified by the purchaser)	-
Cl. 8.2 (Ref. Cl.9 of IS 1868:1996) (Anodinc casting thickness (Cl. 9.2 of IS 1868:1996))	-
4 (SIZES)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-A)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-B)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-C)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-D)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-E)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-F)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-G)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-H)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-L)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-M)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-R)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-T)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-U)	-
7.1 (MANUFACTURE-General)	-
7.1 (MANUFACTURE-General)	-
8.1 (FINISH)	-
3 (TYPES)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-J)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-K)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-N)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-Q)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-S)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-W)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-No. of Screw on Staple or Clip to accommodate Wood Screw N0 8)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-A)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-B)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-C)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-D)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-E)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-F)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-H)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-J)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-K)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-L)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-M)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-Pin dia)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-R)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-T)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-U)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-No. of Screw on Staple or Clip to accommodate Wood Screw N0 8)	-
7.1 (MANUFACTURE-General)	-
7.2 (MANUFACTURE-Brass Sliding Door Bolts or Aluminium Alloy Sliding Door Bolts)	-
7.2 (MANUFACTURE-Brass Sliding Door Bolts or Aluminium Alloy Sliding Door Bolts)	-
8.2 (FINISH)	-
8.2 (FINISH-anodic casting -Min Avg thickness)	-
8.2 (FINISH-anodic casting -Min Local thickness)	-

-
" 3+2 Nos. Excluding except chemical tests and anodic coating

14278

BIS, Central Laboratory (CL)

None

IS 5513 (1996)

Specification for vicat apparatus

Rs1800.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 (DIMENSIONS)	-
5.1 (constructions-General)	-
5.1.1 (constructions-General)	-
5.2 (constructions-Needles )	-
5.2.1 (constructions-Needles -Clearance)	-
5.2.2 (constructions-Needles -Dimensions of Needles-Dia)	-
5.2.2 (constructions-Needles -Dimensions of Needles-Length)	-
5.3 (constructions-Plunger-Dia)	-
5.3 (constructions-Plunger-Length)	-
5.4 (constructions-Movable Rod-Clearance)	-
5.5 (constructions-Graduated Scale )	-
5.5 (constructions-Vicat Mould-internal diamete of top)	-
5.5 (constructions-Vicat Mould-internal diamete of Bottom)	-
5.5 (constructions-Vicat Mould-Height)	-
5.5 (constructions-Vicat Mould-Wall thickness)	-
5.7 (constructions-Mass-Needle C)	-
5.7 (constructions-Mass-Needle F)	-
5.7 (constructions-Mass-Plunger G)	-

-
-

14279

BIS, Central Laboratory (CL)

None

IS 2185 : Part 1 (2005)

Concrete masonry units - Specification: Part 1 hollow and solid concrete blocks (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
9.2 & 4.2 (PHYSICAL REQUIREMENTS-Nominal Dimensions 1.Length 2.Hight 3. Width)	-
9.2 & 4.2.3 (Nominal Dimensions-variation in the length of units )	-
9.2 & 4.2.3 (Nominal Dimensions -variation in height and width of units )	-
9.5 (PHYSICAL REQUIREMENTS -Water Absorption)	-

-
-

14280

BIS, Northern Regional Laboratory (NRL)

None

IS 8329 (2000)

Centrifugally cast (Spun) ductile iron pressure pipes for water, gas and sewage - Specification (Third Revision)

Rs.7800/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 10 (Hardness & Tensile Test)	-
Cl 11 (Hydrostatic Test)	-
Cl 13 (Length, Diameter, Wall Thickness & Ovality)	-

-
Excluding HST for size above 300 mm

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number