BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15656 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

9061

TUV Rheinland (India) Pvt. Ltd. (417), Gurugram

9140526

IS 16333 : Part 3 (2022)

Mobile phone handsets: Part 3 Indian language support for mobile phone handsets - Specific requirements(Second Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Inputting of text)	-	4000	Additional 10% Discount to BIS samples.
5.2(Message Readability)	-	4000	Additional 10% Discount to BIS samples.
6(Marking)	-	2000	Additional 10% Discount to BIS samples.
5.1(Inputting of text)	-	4000	Additional 10% Discount to BIS samples.
5.2(Message Readability)	-	4000	Additional 10% Discount to BIS samples.
6(Marking)	-	2000	Additional 10% Discount to BIS samples.

-
Included w.e.f. 02-01-2023.

9062

TUV Rheinland (India) Pvt. Ltd. (417), Gurugram

9140526

IS 302 : Part 1 (2008)

Safety of household and similar electrical appliances: Part 1 general requirements (Sixth Revision)

90000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	2000.00	-
8.1.1(Protection against live parts in all positions)	-	1000	-
8.1.2(Protection against live parts in openings)	-	500	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	250	-
8.1.4(Protection against live parts against protective impedance)	-	250	-
9(Starting of motor operation test requirements and tests)	-	0	-
10.1(Power input)	-	2500	-
10.2(Current input)	-	2500	-
11.1(General)	-	0	-
11.2(General)	-	0	-
11.3(Heating)	-	8000.00	-
13.1(General)	-	0	-
13.2(Leakage current at operating temperature)	-	2500	-
13.3(Electric Strength at operating temperature)	-	2500	-
14(Transient Over Voltages)	-	2000.00	-
15.0(General)	-	0	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	1000	-
15.2(Spillage Test)	-	1000	-
15.3(Humidity Test)	-	8000	-
16.1(General)	-	0	-
16.2(Leakage Current (after Clause 15))	-	2500	-
16.3(Electric Strength (after clause 15 and 16.2))	-	2500	-
17(Over Load Protection of Transformers and associated circuits)	-	5000.00	-
18(Endurance Test requirements and tests)	-	0	-
19(Abnormal Operation)	-	10000.00	-
20(Stability test)	-	2000.00	-
21(Mechanical Strength Test)	-	2000.00	-
22(Construction verification related test)	-	5000.00	-
23(General)	-	2000.00	-
24(Components)	-	0	-
25(Supply connection and external flexible cords)	-	3000.00	-
26(Terminals for external conductors)	-	2000.00	-
27(Provision for earthing)	-	1000.00	-
28(Screw test and connections)	-	2000.00	-
29(clearance, creepage distances and solid insulation)	-	5000.00	-
30.1(Ball pressure test)	-	4500	-
30.2(Glow Wire Test)	-	4500	-
30.2(Needle Flame Test)	-	1000	-
31(Resistance to Rusting)	-	1000.00	-
32(Radiation Toxicity and Similar Hazards)	-	1000.00	-

-
ESD Test (cl.19.11.4.1), RS test (Cl.19.11.4.2), EFT test (Cl.19.11.4.3), Surge test (Cl.19.11.4.4), CRF test (19.11.4.5), Voltage dips & interruption test (Cl.19.11.4.6), Harmonic immunity (cl.19.11.4.7), Components (Cl.24). "(1)Cooking ranges, hobs, ovens and similar appliances, (2)Commercial Dispensing Appliances and Vending Machines, (3) spin extractors (For testing charges please refer relevant Part 2 standard in LIMS)"

9063

TUV Rheinland (India) Pvt. Ltd. (417), Gurugram

9140526

IS 302 : Part 2 : Sec 6 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 6 cooking ranges, hobs, ovens and similar appliances (First Revision)

23050 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	0	NA
7.0(Marking and instructions)	-	250	NA
8.0(Protection against access to live part test)	-	500	NA
9.0(Starting of motor-operated appliances test)	-	0	NA
10.0(Power Input and current test)	-	1000	NA
11.0(Heating test)	-	2800	NA
13.0(Leakage current and electric strength test)	-	2000	NA
14.0(Transient voltages)	-	1000	NA
15.0(Moisture Resistance)	-	2000	NA
16.0(Leakage current and electric strength test)	-	1000	NA
17.0(Overload protection of transformers test)	-	1500	NA
18.0(Endurance test)	-	0	NA
19.0(Abnormal Operations)	-	2500	NA
20.0(Stability and Mechanical Hazards)	-	500	NA
21.0(Mechanical Strength)	-	1000	NA
22.0(Construction verification related tests)	-	1000	NA
23.0(Internal wiring)	-	500	NA
24.0(Components)	-	0	Under Exclusion
25.0(Supply connections and External Flexible Cords)	-	1000	NA
26.0(Terminal for External Conductors)	-	500	NA
27.0(Provision for Earthing)	-	500	NA
28.0(Screws and connections)	-	500	NA
29.0(Clearances and Creepage distances and solid insulation)	-	500	NA
30.0(Resistance to heat and fire)	-	500	NA
31.0(Resistance to rusting)	-	1000.00	NA
32.0(Radiation, Toxicity and Similar hazards)	-	1000.00	NA

-
Included w.e.f. 12-11-2020. ESD Test (cl.19.11.4.1), RS test (Cl.19.11.4.2), EFT test (Cl.19.11.4.3), Surge test (Cl.19.11.4.4), CRF test (19.11.4.5), Voltage dips & interruption test (Cl.19.11.4.6), Harmonic immunity (cl.19.11.4.7), Components (Cl.24), Radiation, toxicity & similar hazards (cl.32.101).

9064

TUV Rheinland (India) Pvt. Ltd. (417), Gurugram

9140526

IS 302 : Part 2 : Sec 15 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 15 appliances for heating liquids (First Revision)

38550 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	0	NA
7(Marking and instructions)	-	250	NA
8(Protection against live parts)	-	1000	NA
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	0	NA
10(POWER INPUT AND CURRENT)	-	2000	NA
11(HEATING)	-	5500	NA
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	2000	NA
14(TRANSIENT OVERVOLTAGES)	-	1000	NA
15(MOISTURE RESISTANCE)	-	2000	NA
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	2000	NA
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	1500	NA
18(ENDURANCE)	-	0	NA
19(ABNORMAL OPERATION)	-	5500	NA
20(STABILITY AND MECHANICAL HAZARDS)	-	1000	NA
21(MECHANICAL STRENGTH)	-	1000	NA
22(CONSTRUCTION)	-	1000	NA
23(INTERNAL WIRING)	-	1000	NA
24(COMPONENTS)	-	0	Under Exclusion
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	2000	NA
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	1000	NA
27(PROVISION FOR EARTHING)	-	1000	NA
28(SCREWS AND CONNECTIONS)	-	2000	NA
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	20000	NA
30(RESISTANCE TO HEAT AND FIRE)	-	1800	NA
31(RESISTANCE TO RUSTING)	-	1000	NA
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	1000	NA

9065

TUV Rheinland (India) Pvt. Ltd. (417), Gurugram

9140526

IS 13252 : Part 1 (2010)

Information technology equipment - Safety: Part 1 general requirements (Second Revision)

134000.00 View breakup
Rs.1,34,000/- Printers, Plotters Rs.65,000/- Laptop/ Notebook/ Tablets, Set top box, Smart Card Reader, Passport Reader, Digital Camera Rs.1,10,500/- Visual display units, Video Monitors of screen size 32” and above, Automatic Data processing machines, Visual display units, Video Monitors of screen size up to 32, Automatic teller cash dispensing machines Rs.80,000/- Scanners, Telephone answering machines, Power adapter for IT equipments, Cash Registers, Point of sale terminal, Copying machines/ Duplicators, Mail Processing Machines / Postage Machines / Franking Machines, Standalone switch mode power supplied (SMPS) with output voltage 48 V (max). Rs.55,000/- Wireless Key boards, Mobile Phones, Power Bank for use in portable applications, CCTV Cameras/ CCTV Recorders, USB driven Barcode readers, Bar code scanners, Iris Scanners, Optical Finger Print scanners, Smart Watches, Keyboard, USB type external hard disk drive, USB type External solid state storage devices (above 256 GB capacity)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1.5(Components)	-	7000.00	ok
1.6(Power interface .)	-	8000.00	ok
1.7(Markings and instructions)	-	5000.00	ok
2.1(Protection from electric shock and energy hazards)	-	4000.00	ok
2.2(SELV circuits)	-	3000.00	ok
2.3(TNV circuits)	-	2000.00	ok
2.4(Limited current circuits)	-	2500.00	ok
2.5(Limited power sources .)	-	5000.00	ok
2.6(Provisions for earthing and bonding)	-	3500.00	ok
2.8(Safety interlocks)	-	1000.00	ok
2.9(Electrical insulation)	-	7000.00	ok
2.10(Clearances, creepage distances and distances through insulation)	-	8000.00	ok
3.1(General)	-	3000.00	ok
3.2(Connection to a mains supply)	-	1500.00	ok
3.5(Interconnection of equipment)	-	1000.00	ok
4.1(Stability)	-	4000.00	ok
4.2(Mechanical strength)	-	8000.00	ok
4.3(Design and construction)	-	1000.00	ok
4.4(Protection against hazardous moving parts)	-	3000.00	ok
4.5(Thermal requirements)	-	12000.00	ok
4.6(Openings in enclosures)	-	2000.00	ok
4.7(Resistance to fire)	-	3000.00	ok
5.1(Touch current and protective conductor curren)	-	5000.00	ok
5.2(Electric strength)	-	7000.00	ok
5.3(Abnormal operating and fault conditions)	-	12000.00	ok
6.1(Protection of telecommunication network service persons, and users of other equipment connected to the network, from hazards in the equipment)	-	1000.00	ok
6.2(Protection of equipment users from overvoltages on networks telecommunication)	-	3000.00	ok
6.3(Protection of the telecommunication wiring system from overheating)	-	1000.00	ok
7.1(General)	-	1000.00	ok
7.2(Protection of cable distribution system service persons, and users of other equipment connected to the system, from hazardous voltages in the equipment)	-	1000.00	ok
7.4(Insulation between primary circuits and cable distribution systems)	-	3000.00	ok
2.7(Overcurrent and earth fault protection in primary circuits)	-	1000.00	ok
3.4(Disconnection from the mains supply)	-	2000.00	ok
3.3(Wiring terminals for connection of external conductors)	-	1500.00	ok
7.3(Protection of equipment users from overvoltages on the cable distribution system)	-	1000.00	ok

-
Exclusion of following test: Cathode Ray Tubes (Cl.4.2.8), Radiation (Cl.4.3.13), Effect of UV radiation on material (Cl.4.3.13.3/Annex Y), Thermal control (Cl.1.5.3), Capacitor bridging insulation (Cl.1.5.6), Resisters bridging insulation (Cl.1.5.7), Surge suppression (Cl.1.5.9), Evaluation of IC current limiter (Annex CC), Insulation in wound components (Cl.2.10.5.11), Wire wound components (Cl.2.10.5.12), Wire with solvent-based enamel in wound components (Cl.2.10.5.13), Additional insulation in wound components (Cl.2.10.5.14), PCB material (Cl.2.10.6), Non rewirable plug with PVC sheathed cable (Cl.3.2.5),:, LED Laser class (Cl.4.3.13.5), Optocoupler (Cl.2.10.5.4), Safety Interlocks (Cl.2.8), Winding wire (Cl.2.10.5.13), High pressure lamps (Cl.4.2.9), Materials (Cl.4.7.3), Batteries (Cl.4.3.8), Oil & grease (Cl.4.3.9).

9066

TUV Rheinland (India) Pvt. Ltd. (417), Gurugram

9140526

IS 10322 : Part 5 : Sec 1 (2012)

Luminaires: Part 5 particular requirements: Sec 1 fixed general purpose luminaires (First Revision)

75000.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Test Requireements)	-	0	-
5(Classification of Luminaires')	-	0	-
6.0(Marking)	-	2000.00	-
7.0(Construction)	-	8000.00	-
8.0(Creepage Distance and Clearances)	-	3000.00	-
9.0(Provision for earthing)	-	2000.00	-
10.0(Terminals)	-	5000.00	-
11.0(External & Internal Wiring)	-	3000.00	-
12.0(Protection against electric shock)	-	2000.00	-
13.0(Endurance Tests and Thermal Tests)	-	15000.00	-
14.0(Resistance to Dust & Moisture)	-	8000.00	-
15.0(Insulation Resistance and Electric Strength)	-	10000.00	-
16.0(Resistance to Heat , fire and tracking)	-	12000.00	-
17.0(Photometric Test)	-	5000.00	-

-
UV Radiation for Metal halide lamps (Cl.4.24, Annex-P)

9067

TUV Rheinland (India) Pvt. Ltd. (417), Gurugram

9140526

IS 10322 : Part 5 : Sec 2 (2012)

Luminaires: Part 5 particular requirements: Sec 2 recessed luminaires (First Revision)

75000.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Test Requireements)	-	0	-
5(Classification of Luminaires')	-	0	-
6(Marking)	-	2000.00	-
7(Construction)	-	8000.00	-
8(Creepage Distance and Clearances)	-	3000.00	-
9(Provision for earthing)	-	2000.00	-
10(Terminals)	-	5000.00	-
11(External & Internal Wiring)	-	3000.00	-
12(Protection against electric shock)	-	2000.00	-
13(Endurance Tests and Thermal Tests)	-	15000.00	-
14(Resistance to Dust and Moisture)	-	8000.00	-
15(Insulation Resistance and Electric Strength)	-	10000.00	-
16(Resistance to Heat , fire and tracking)	-	12000.00	-
17(Photometric Test)	-	5000.00	-

-
UV Radiation for Metal halide lamps (Cl.4.24, Annex-P)

9068

TUV Rheinland (India) Pvt. Ltd. (417), Gurugram

9140526

IS 10322 : PART 5 : SEC 3 (2012)

Luminaires: Part 5 particular requirements: Sec 3 luminaires for road and street lighting (First Revision)

77000.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Test Requireements)	-	0.0	-
5(Classification of Luminaires')	-	0.0	-
6.0(Marking)	-	2000.00	-
7.0(Construction)	-	10000.00	-
8.0(Creepage Distance and Clearances)	-	3000.00	-
9.0(Provision for earthing)	-	2000.00	-
10.0(Terminals)	-	5000.00	-
11.0(External & Internal Wiring)	-	3000.00	-
12.0(Protection against electric shock)	-	2000.00	-
13.0(Endurance Tests and Thermal Tests)	-	15000.00	-
14.0(Resistance to Dust & Moisture)	-	8000.00	-
15.0(Insulation Resistance and Electric Strength)	-	10000.00	-
16.0(Resistance to Heat , fire and tracking)	-	12000.00	-
17.0(Photometric Test)	-	5000.00	-

-
UV Radiation for Metal halide lamps (Cl.4.24, Annex-P)

9069

TUV Rheinland (India) Pvt. Ltd. (417), Gurugram

9140526

IS 15885 : Part 2 : Sec 13 (2012)

Safety of lamp controlgear: Part 2 particular requirements: Sec 13 d.c. or a.c. supplied electronic controlgear for led modules

42000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	2000	-
8(Protection against accidental contact with live parts)	-	2000	-
9(Terminals)	-	5000	-
10(PROVISION FOR EARTHING)	-	2000	-
11(MOISTURE RESISTANCE)	-	8000	-
12(Electric Strength)	-	2000	-
13(Thermal endurance test for winding of ballasts)	-	0	-
14(Fault conditions)	-	5000	-
15(Transformer heating)	-	5000	-
16(Construction)	-	2000	-
17(Creepage distance and clearances)	-	3000	-
18(Screws, current carrying parts and connections)	-	3000	-
19(Resistance to heat, fire and tracking)	-	0	-
20(Resistance to corrosion)	-	3000	-

-
-

9070

TUV Rheinland (India) Pvt. Ltd. (417), Gurugram

9140526

IS 16102 : Part 1 (2012)

Self - Ballasted led lamps for general lighting services: Part 1 safety requirements

39000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking)	-	2000	-
6(Interchangeability)	-	3000	-
7(Protection against accidental contact with live parts)	-	2000	-
8(Insulation Resistance and Electric Strength)	-	10000	-
9(MECHANICAL STRENGTH)	-	2000	-
10(cap temperature)	-	8000	-
11(Resistance to Heat)	-	3000	-
12(Resistance to Flame and Ignition)	-	5000	-
13(Fault conditions)	-	3000	-
14(Creepage distance and clearances)	-	2000	-

-
-

9071

TUV Rheinland (India) Pvt. Ltd. (417), Gurugram

9140526

IS 16103 : Part 1 (2012)

Led modules for general lighting: Part 1 safety requirements

37500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	1273	NA
8(Terminals)	-	3182	NA
9(PROVISION FOR EARTHING)	-	1273	NA
10(Protection against accidental contact with live parts)	-	1273	NA
11(Mositure Resistance and Insulation)	-	4091	NA
12(Electric Strength)	-	1273	NA
13(Fault conditions)	-	3182	NA
15(Construction)	-	3182	NA
16(Creepage distance and clearances)	-	1909	NA
17(Screws, current carrying parts and connections)	-	1909	NA
18(Resistance to heat, fire and tracking)	-	7044	NA
19(Resistance to corrosion)	-	1909	NA

-
Included w.e.f. 27-08-2020.

9072

TUV Rheinland (India) Pvt. Ltd. (417), Gurugram

9140526

IS 10322 : Part 5 : Sec 5 (2013)

Luminaires: Part 5 particular requirements: Sec 5 floodlights (First Revision)

77000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Test Requireements)	-	0	-
5(Classification of Luminaires')	-	0	-
6.0(Marking)	-	2000.00	-
7.0(Construction)	-	10000.00	-
8.0(Creepage Distance and Clearances)	-	3000.00	-
9.0(Provision for earthing)	-	2000.00	-
10.0(Terminals)	-	5000.00	-
11.0(External & Internal Wiring)	-	3000.00	-
12.0(Protection against electric shock)	-	2000.00	-
13.0(Endurance Tests and Thermal Tests)	-	15000.00	-
14.0(Resistance to Dust & Moisture)	-	8000.00	-
15.0(Insulation Resistance and Electric Strength)	-	10000.00	-
16.0(Resistance to Heat , fire and tracking)	-	12000.00	-
17.0(Photometric Test)	-	5000.00	-

-
UV Radiation for Metal halide lamps (Cl.4.24, Annex-P)

9073

TUV Rheinland (India) Pvt. Ltd. (417), Gurugram

9140526

IS 10322 : Part 5 : Sec 6 (2013)

Luminaires: Part 5 particular requirements: Sec 6 handlamps

72000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Test Requireements)	-	0	-
5(Classification of Luminaires')	-	0	-
6.0(Marking)	-	2000.00	-
7.0(Construction)	-	7000.00	-
8.0(Creepage Distance and Clearances)	-	3000	-
9.0(Provision for earthing)	-	0	-
10.0(Terminals)	-	5000	-
11.0(External & Internal Wiring)	-	3000	-
12.0(Protection against electric shock)	-	2000	-
13.0(Endurance Tests and Thermal Tests)	-	17000	-
14.0(Resistance to Dust & Moisture)	-	8000	-
15.0(Insulation Resistance and Electric Strength)	-	10000	-
16.0(Resistance to Heat , fire and tracking)	-	15000	-

-
UV Radiation for Metal halide lamps (Cl.4.24, Annex-P)

9074

TUV Rheinland (India) Pvt. Ltd. (417), Gurugram

9140526

IS 616 (2017)

Audio, video and similar electronic apparatus - Safety requirements (Fifth Revision)

120000.00 View breakup
Rs. 90,000/- Plasma/LCD/LED Television of Screen Size up to 32" & above, Electronic Musical system with input power above 200W, Television other than plasma/LCD/LED/TVs. Rs.1,20,000/- Electronics Games (Video), Optical Disc Players with built in amplifiers of input power 200W and above, Amplifiers with input power 2000W and above Rs.80,000/- Power Adaptors for Audio, Video & Similar Electronic Apparatus, Electronic Musical system with input power below 200W, Smart Speakers (with and without display), Bluetooth speakers Rs.70,000/- Wireless headphone & earphone, Wireless Microphone, Video Camera, Webcam

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking and instructions)	-	12000.00	-
6(Hazardous radiations)	-	3000.00	-
7(Heating under normal operating conditions)	-	20000.00	-
8(Constructional requirements with regard to the protection against electric shock)	-	5000.00	-
9(Electric shock hazard under normal operating conditions)	-	6000.00	-
10(Insulation requirements)	-	8000.00	-
11(Fault conditions)	-	15000.00	-
12(Mechanical strength)	-	12000.00	-
13(CLEARANCES and CREEPAGE DISTANCES)	-	6000.00	-
14(Components)	-	12000.00	-
15(TERMINALS)	-	3000.00	-
16(External flexible cords)	-	3000.00	-
17(Electrical connections and mechanical fixings)	-	4000.00	-
18(Mechanical strength of picture tubes and protection against the effects of implosion)	-	0.00	-
19(Stability and mechanical hazards)	-	6000.00	-
20(Resistance to fire)	-	5000.00	-

-
REVISED VERSION (IS 616:2017) INCLUDED w.e.f. 20.07.2018. Exclusion of following test: Ionizing radiation (Cl.6.1), Laser Radiation/ Light emitting diodes (LEDs) (Cl.6.2/6.3), Requirements for insulated winding wires for use without additional interleaved insulation (Cl. 8.16, H.2.3 & H.2.4), Endurance test for wound components with insulated winding wires without additional interleaved insulation (Cl.8.17), Cord bending test (Cl.16.3 b), Mechanical strength of Picture tubes and protection against the effect of implosion (Cl.18), External flexible cords (Cl.16), Plugs & sockets (Cl.15.1), Remote control devices held in hand (Cl.12.3), Printed boards (Cl.13.5), Electrical component & mech. Parts (Cl.20.2), Fire enclosure (Cl.20.3), Resistors (Cl.14.2), Capacitors & RC units (Cl.14.3), Inductors & windings (Cl.14.4), High voltage components & assemblies (Cl.14.5), Protective devices (Cl.14.6), Thermal releases (Cl.14.6.2), Fuse & fuse holder (Cl.14.6.3), PTC Thermistor (Cl.14.6.4), Switch (Cl.14.7), Safety interlock (Cl.14.8), Motors (Cl.14.10), Batteries (Cl.14.11), Opto coupler (Cl.14.12), Surge suppression varistors (Cl.14.13)

9075

Delta Testing and Research Laboratories Private Limited (C5)

9179506

IS 14246 (2024)

CONTINUOUSLY PRE-PAINTED GALVANIZED STEEL SHEETS AND STRIPS - SPECIFICATION Second Revision

All Grade / Type / Size / Designation

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(Steel Base)	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges
Cl-4.2(Metallic Coating)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges
Cl-4.3(Organic Coating)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges
Cl-4.4(Dry Film Thickness)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges
Cl-4.5(Profiles)	-	250	10% Discount to BIS & for others 1.5 times of mentioned testing charges
Cl-5(Classification of durability of organic coating)	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges
Cl-6.1(Sampling of Test Specimen)	-	250	10% Discount to BIS & for others 1.5 times of mentioned testing charges
Cl-6.2.3(Bend Test)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges
Cl-6.3.1(Pencil Hardness Test)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges
Cl-6.4(Impact Resistance Test)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges
Cl-6.5(Cross Hatch Test)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges
Cl-6.6(Solvent Resistance Test)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges
Cl-6.7(Other Tests)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges
Cl-7.3.1(Gloss)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges
Cl-7.3.2(Colour)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges
Cl-8.1, Table-4 (i)(Undercut at scribed lines)	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges
Cl-8.1, Table-4 (ii)(Corrosion of the base metal)	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges
Cl-8.1, Table-4 (iii)(Blistering)	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges
Cl-8.2 Table 5 (i)(Undercut at scribed lines)	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges
Cl-8.2 Table 5 (ii)(Blistering)	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges
Cl-9.1(The nominal thickness of sheets)	-	300	10% Discount to BIS & for others 1.5 times of mentioned testing charges
Cl-9.2(The case of strips)	-	300	10% Discount to BIS & for others 1.5 times of mentioned testing charges
Cl-9.3(Mass of each pack)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges
Cl-9.4.1(Tolerances on thickness sheets and strips)	-	300	10% Discount to BIS & for others 1.5 times of mentioned testing charges
Cl-9.4.2(Width)	-	300	10% Discount to BIS & for others 1.5 times of mentioned testing charges
Cl-9.4.3(Length)	-	300	10% Discount to BIS & for others 1.5 times of mentioned testing charges
Cl-9.4.4(Mass)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges
Cl-10.1(Camber)	-	300	10% Discount to BIS & for others 1.5 times of mentioned testing charges
Cl-10.2(Deviation from Squareness (Out-of Square)	-	300	10% Discount to BIS & for others 1.5 times of mentioned testing charges
Cl-10.3(Deviation from Flatness)	-	300	10% Discount to BIS & for others 1.5 times of mentioned testing charges
Cl-14(Marking)	-	250	10% Discount to BIS & for others 1.5 times of mentioned testing charges

21 Aug, 2027

-
Included w.e.f 13.02.2025

9076

Ahmedabad Textile Industry's Research Association (ATIRA), Ahmedabad

7173002

IS 16390 (2015)

Agro textiles - Nylon knitted seamless gloves for tobacco harvesters - Specification

18350 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Yarn)	-	4200	-
4.2(Gloves)	-	1250	-
4.3(Freedom from Defects)	-	200	-
5.1(Dimensions and Mass)	-	2400	-
5.2(Wales and Courses)	-	300	-
5.3(The gloves shall also conform)	-	0	-
6.1(The gloves shall be matched and paired)	-	200	-
6.1.1(difference of 1.0 cm in the overall length permissible while pairin Quantitative)	-	0	-
4.1(Yarn)	-	0	-
4.2(Gloves)	-	0	-
4.3(Freedom from Defects)	-	0	-
5.1(Dimensions and Mass)	-	0	-
5.2(Wales and Courses)	-	0	-
5.3(The gloves shall also conform)	-	0	-
6.1(The gloves shall be matched and paired)	-	0	-
4.1(Yarn)	-	0	-
4.2(Gloves)	-	0	-
4.3(Freedom from Defects)	-	0	-
5.1(Dimensions and Mass)	-	0	-
5.2(Wales and Courses)	-	0	-
5.3(The gloves shall also conform)	-	0	-
6.1(The gloves shall be matched and paired)	-	0	-
6.1.1(difference of 1.0 cm in the overall length permissible while pairin Quantitative)	-	0	-
4.1(Yarn)	-	0	-
4.2(Gloves)	-	0	-
4.3(Freedom from Defects)	-	0	-
5.1(Dimensions and Mass)	-	0	-
5.2(Wales and Courses)	-	0	-
5.3(The gloves shall also conform)	-	0	-
6.1(The gloves shall be matched and paired)	-	0	-
Cl-5.3, Table-4 (i)(Dimensional change (due to relaxation), percent, Max)	-	350	-
Cl-5.3, Table-4 (ii)(pH value of aqueous extract)	-	350	-
Cl-5.3, Table-4 (iii)(Scouring loss, percent, max)	-	650	-
Cl-5.3, Table-4 (iv)(Glove finger dexterity, s, Max)	-	200	-
Cl-5.3, Table-4 (v)(Dimensional change due to washing, percent, Max a) Lengthwise)	-	250	-
Cl-5.3, Table-4 (v)(Dimensional change due to washing, percent, Max : b) Widthwise)	-	0	-
Cl-5.3, Table-4 (vi)(Abrasion resistance with zero emery paper at a pressure of 9 kpa for 700 cycles)	-	1200	-
Cl-5.3, Table-4 (vii)(Water vapour permeability, g/m2/day)	-	6800	-

-
Included w.e.f 04.03.2025 Exclusion: Cl 4.2.1 (The gloves shall be of the design), Cl 5.4 (Sealed Sample),Cl 5.4.1 (The custody of the sealed), Cl 9.1 (Lot),Cl 9.1.1 (The conformity of the lot), Cl 9.2 (Unless otherwise)

9077

Sipra labs Ltd., Hyderabad

6117916

IS 14543 (2024)

Packaged Drinking Water Other than Packaged Natural Mineral Water Specification Third Revision

26000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.2.1(Escherichia coli or thermotolerant bacteria)	-	300	-
Cl-5.2.2(Coliform)	-	150	-
Cl-5.2.3(Faecal streptococci)	-	375	-
Cl-5.2.3(Staphylococcus aureus)	-	375	-
Cl-5.2.4(Sulphite Reducing Anaerobes)	-	150	-
Cl-5.2.5(Pseudomonas Aeruginosa)	-	300	-
5.2.6(Aerobic Microbial Count @ 20 to 22 deg C)	-	100	-
Cl-5.2.6(Aerobic Microbial Count @ 37 deg C)	-	150	-
Cl-5.2.7(Yeast and mould)	-	150	-
Cl-5.2.8(Salmonella)	-	675	-
Cl-5.2.8(shigella)	-	675	-
Cl-5.2.9(Vibrio cholera)	-	450	-
Cl-5.2.9(V.parahaemolyticus)	-	450	-
Cl-5.3, Table-1 (i)(Colour, true colour units, Max)	-	37.5	-
Cl-5.3, Table-1 (ii)(Odour)	-	37.5	-
Cl-5.3, Table-1 (iii)(Taste)	-	37.5	-
Cl-5.3, Table-1 (iv)(Turbidity, nephelometric turbidity unit (NTU), Max)	-	37.5	-
Cl-5.3, Table-1 (v)(Total dissolved solids, mg/l, Max)	-	75	-
Cl-5.3, Table-1 (vi)(pH)	-	37.5	-
Cl-5.3, Table-2 (i)(Barium (as Ba))	-	150	-
Cl-5.3, Table-2 (ii)(Copper (as Cu))	-	75	-
Cl-5.3, Table-2 (iii)(Iron (as Fe))	-	75	-
Cl-5.3, Table-2 (iv)(Manganese (as Mn))	-	75	-
Cl-5.3, Table-2 (v)(Nitrate (as NO3 ))	-	300	-
Cl-5.3, Table-2 (vi)(Nitrite (as NO2 ))	-	225	-
Cl-5.3, Table-2 (vii)(Fluoride (as F))	-	150	-
Cl-5.3, Table-2 (viii)(Zinc (as Zn))	-	75	-
Cl-5.3, Table-2 (ix)(Silver (as Ag))	-	75	-
Cl-5.3, Table-2 (x)(Aluminium (as A1))	-	75	-
Cl-5.3, Table-2 (xi)(Chloride (as Cl))	-	75	-
Cl-5.3, Table-2 (xii)(Selenium (as Se))	-	150	-
Cl-5.3, Table-2 (xiii)(Sulphate (as SO4 ))	-	150	-
Cl-5.3, Table-2 (xiv)(Alkalinity (as HCO3 ))	-	75	-
Cl-5.3, Table-2 (xv)(Calcium (as Ca))	-	75	-
Cl-5.3, Table-2 (xvi)(Magnesium (as Mg))	-	75	-
Cl-5.3, Table-2 (xvii)(Sodium (as Na))	-	75	-
Cl-5.3, Table-2 (xviii)(Residual free chlorine)	-	75	-
Cl-5.3, Table-2 (xix)(Phenolic compounds (as C6H5OH))	-	300	-
Cl-5.3, Table-2 (xx)(Mineral oil)	-	75	-
Cl-5.3, Table-2 (xxi)(Anionic surface active agents)	-	375	-
Cl-5.3, Table-2 (xxii)(Sulphide)	-	150	-
Cl-5.3, Table-2 (xxiii)(Antimony (as Sb))	-	150	-
Cl-5.3, Table-2 (xxiv)(Borates (as B))	-	150	-
Cl-5.3, Table-2 (xxv)(Bromates (as BrO3 ))	-	4000	-
Cl-5.3, Table-3 (i)(Mercury (as Hg))	-	150	-
Cl-5.3, Table-3 (ii)(Cadmium (as Cd))	-	150	-
Cl-5.3, Table-3 (iii)(Arsenic (as As))	-	150	-
Cl-5.3, Table-3 (iv)(Cyanide (as CN))	-	75	-
Cl-5.3, Table-3 (v)(Lead (as Pb))	-	150	-
Cl-5.3, Table-3 (vi)(Chromium (as Cr))	-	150	-
Cl-5.3, Table-3 (vii)(Nickel (as Ni))	-	75	-
Cl-5.3, Table-3 (viii)(Polychlorinated biphenyl (PCB))	-	300	-
Cl-5.3, Table-3 (ix)(Polynuclear aromatic hydrocarbons)	-	450	-
Cl-5.3, Table-3 (x)(Uranium)	-	3000	-
Cl-5.3, Table-4 (i)(Alpha emitters, Becquerel (Bq/l))	-	2500	-
Cl-5.3, Table-4 (ii)(Beta emitters, Becquerel (Bq/l),)	-	2500	-
5.4/Annex D/i(O,P-DDT)	-	75	-
5.4/Annex D/i(P,P-DDT)	-	80	-
5.4/Annex D/i(O,P-DDE)	-	120	-
5.4/Annex D/i(P,P-DDE)	-	75	-
5.4/Annex D/i(O,P-DDD)	-	100	-
5.4/Annex D/i(P,P-DDD)	-	120	-
5.4/Annex D/ii(Lindane)	-	100	-
5.4/Annex D/iii(a-HCH)	-	100	-
5.4/Annex D/iii(β- HCH)	-	120	-
5.4/Annex D/iii(d-HCH)	-	100	-
5.4/Annex D/iv(a-Endosulfan)	-	75	-
5.4/Annex D/iv(b-Endosulfan)	-	75	-
5.4/Annex D/iv(Endosulfan sulfate)	-	75	-
5.4/Annex D/v(Monochrotophos)	-	120	-
5.4/Annex D/vi(Ethion)	-	100	-
5.4/Annex D/vii(Chlorpyrifos)	-	100	-
5.4/Annex D/viii(Phorate)	-	100	-
5.4/Annex D/viii(Phorate sulphoxide)	-	100	-
5.4/Annex D/viii(Phorate sulfone)	-	120	-
5.4/Annex D/ix(2,4 –D)	-	675	-
5.4/Annex D/x(Butachlor)	-	75	-
5.4/Annex D/xi(Isoproturon)	-	600	-
5.4/Annex D/xii(Alachlor)	-	80	-
5.4/Annex D/xiii(Atrazine)	-	100	-
5.4/Annex D/xiv(Methyl parathion)	-	75	-
5.4/Annex D/xxvii(Methyl paraoxon)	-	75	-
5.4/Annex D/xv(Malathion)	-	100	-
5.4/Annex D/xxviii(Malaoxon)	-	100	-
5.4/Annex D/xvi(Aldrin)	-	75	-
5.4/Annex D/xvi(Dieldrin)	-	75	-
Cl-5.4 (ii)(Total pesticide residue)	-	1500	-
Cl-5.4 (i)(Pesticide residues considered individually)	-	0	-
5.3(Appearance)	-	37.5	-
Cl-5.1(General Requirements)	-	0	-
5.4 i)(o,p DDT)	-	75	Repeated parameter
5.4 i)(p,p DDT)	-	80	Repeated parameter
5.4, i)(o,p DDE)	-	120	Repeated parameter
5.4 i)(p,p DDE)	-	75	Repeated parameter
5.4 i)(o,p DDD)	-	100	Repeated parameter
5.4 i)(p,p DDD)	-	120	Repeated parameter
5.4 i)(Gamma-HCH (Lindane))	-	100	Repeated parameter
5.4 i)(alpha-HCH)	-	100	Repeated parameter
5.4 i)(beta-HCH)	-	120	Repeated parameter
5.4 i)(Delta-HCH)	-	100	Repeated parameter
5.4 i)(alpha-Endosulfan)	-	75	Repeated parameter
5.4 i)(beta-Endosulfan)	-	75	Repeated parameter
5.4 i)(Endosulfan Sulphate)	-	75	Repeated parameter
5.4 i)(Monocrotophos)	-	120	Repeated parameter
5.4 i)(Ethion)	-	100	Repeated parameter
5.4 i)(Chlorpyrifos)	-	100	Repeated parameter
5.4 i)(Phorate)	-	100	Repeated parameter
5.4 i)(Phorate sulphoxide)	-	100	Repeated parameter
5.4 i)(Phorate sulphone)	-	120	Repeated parameter
5.4 i)(2,4-D)	-	675	Repeated parameter
5.4 i)(Butachlor)	-	75	Repeated parameter
5.4 i)(Isoproturon)	-	600	Repeated parameter
5.4 i)(Alachlor)	-	80	Repeated parameter
5.4 i)(Atrazine)	-	100	Repeated parameter
5.4 i)(Methyl Parathion)	-	75	Repeated parameter
5.4 i)(Methyl Paraoxon)	-	75	Repeated parameter
5.4 i)(Malathion)	-	100	Repeated parameter
5.4, i)("oxygen analogue of Malathion (Malaoxon)")	-	100	Repeated parameter
5.4 i)(Dieldrin)	-	75	Repeated parameter
Table 3, x)(Uranium)	-	3000	Repeated parameter
5.4 i)(Aldrin)	-	75	Repeated parameter
Cl-5.2.1(Escherichia coli or thermotolerant bacteria)	-	-	-
Cl-5.2.2(Coliform)	-	-	-
Cl-5.2.3(Faecal streptococci)	-	-	-
Cl-5.2.3(Staphylococcus aureus)	-	-	-
Cl-5.2.4(Sulphite Reducing Anaerobes)	-	-	-
Cl-5.2.5(Pseudomonas Aeruginosa)	-	-	-
5.2.6(Aerobic Microbial Count @ 20 to 22 deg C)	-	-	-
Cl-5.2.6(Aerobic Microbial Count @ 37 deg C)	-	-	-
Cl-5.2.7(Yeast and mould)	-	-	-
Cl-5.2.8(Salmonella)	-	-	-
Cl-5.2.8(shigella)	-	-	-
Cl-5.2.9(Vibrio cholera)	-	-	-
Cl-5.2.9(V.parahaemolyticus)	-	-	-
Cl-5.3, Table-1 (i)(Colour, true colour units, Max)	-	-	-
Cl-5.3, Table-1 (ii)(Odour)	-	-	-
Cl-5.3, Table-1 (iii)(Taste)	-	-	-
Cl-5.3, Table-1 (iv)(Turbidity, nephelometric turbidity unit (NTU), Max)	-	-	-
Cl-5.3, Table-1 (v)(Total dissolved solids, mg/l, Max)	-	-	-
Cl-5.3, Table-1 (vi)(pH)	-	-	-
Cl-5.3, Table-2 (i)(Barium (as Ba))	-	-	-
Cl-5.3, Table-2 (ii)(Copper (as Cu))	-	-	-
Cl-5.3, Table-2 (iii)(Iron (as Fe))	-	-	-
Cl-5.3, Table-2 (iv)(Manganese (as Mn))	-	-	-
Cl-5.3, Table-2 (v)(Nitrate (as NO3 ))	-	-	-
Cl-5.3, Table-2 (vi)(Nitrite (as NO2 ))	-	-	-
Cl-5.3, Table-2 (vii)(Fluoride (as F))	-	-	-
Cl-5.3, Table-2 (viii)(Zinc (as Zn))	-	-	-
Cl-5.3, Table-2 (ix)(Silver (as Ag))	-	-	-
Cl-5.3, Table-2 (x)(Aluminium (as A1))	-	-	-
Cl-5.3, Table-2 (xi)(Chloride (as Cl))	-	-	-
Cl-5.3, Table-2 (xii)(Selenium (as Se))	-	-	-
Cl-5.3, Table-2 (xiii)(Sulphate (as SO4 ))	-	-	-
Cl-5.3, Table-2 (xiv)(Alkalinity (as HCO3 ))	-	-	-
Cl-5.3, Table-2 (xv)(Calcium (as Ca))	-	-	-
Cl-5.3, Table-2 (xvi)(Magnesium (as Mg))	-	-	-
Cl-5.3, Table-2 (xvii)(Sodium (as Na))	-	-	-
Cl-5.3, Table-2 (xviii)(Residual free chlorine)	-	-	-
Cl-5.3, Table-2 (xix)(Phenolic compounds (as C6H5OH))	-	-	-
Cl-5.3, Table-2 (xx)(Mineral oil)	-	-	-
Cl-5.3, Table-2 (xxi)(Anionic surface active agents)	-	-	-
Cl-5.3, Table-2 (xxii)(Sulphide)	-	-	-
Cl-5.3, Table-2 (xxiii)(Antimony (as Sb))	-	-	-
Cl-5.3, Table-2 (xxiv)(Borates (as B))	-	-	-
Cl-5.3, Table-2 (xxv)(Bromates (as BrO3 ))	-	-	-
Cl-5.3, Table-3 (i)(Mercury (as Hg))	-	-	-
Cl-5.3, Table-3 (ii)(Cadmium (as Cd))	-	-	-
Cl-5.3, Table-3 (iii)(Arsenic (as As))	-	-	-
Cl-5.3, Table-3 (iv)(Cyanide (as CN))	-	-	-
Cl-5.3, Table-3 (v)(Lead (as Pb))	-	-	-
Cl-5.3, Table-3 (vi)(Chromium (as Cr))	-	-	-
Cl-5.3, Table-3 (vii)(Nickel (as Ni))	-	-	-
Cl-5.3, Table-3 (viii)(Polychlorinated biphenyl (PCB))	-	-	-
Cl-5.3, Table-3 (ix)(Polynuclear aromatic hydrocarbons)	-	-	-
Cl-5.3, Table-3 (x)(Uranium)	-	-	-
Cl-5.3, Table-4 (i)(Alpha emitters, Becquerel (Bq/l))	-	-	-
Cl-5.3, Table-4 (ii)(Beta emitters, Becquerel (Bq/l),)	-	-	-
5.4/Annex D/i(O,P-DDT)	-	-	-
5.4/Annex D/i(P,P-DDT)	-	-	-
5.4/Annex D/i(O,P-DDE)	-	-	-
5.4/Annex D/i(P,P-DDE)	-	-	-
5.4/Annex D/i(O,P-DDD)	-	-	-
5.4/Annex D/i(P,P-DDD)	-	-	-
5.4/Annex D/ii(Lindane)	-	-	-
5.4/Annex D/iii(a-HCH)	-	-	-
5.4/Annex D/iii(β- HCH)	-	-	-
5.4/Annex D/iii(d-HCH)	-	-	-
5.4/Annex D/iv(a-Endosulfan)	-	-	-
5.4/Annex D/iv(b-Endosulfan)	-	-	-
5.4/Annex D/iv(Endosulfan sulfate)	-	-	-
5.4/Annex D/v(Monochrotophos)	-	-	-
5.4/Annex D/vi(Ethion)	-	-	-
5.4/Annex D/vii(Chlorpyrifos)	-	-	-
5.4/Annex D/viii(Phorate)	-	-	-
5.4/Annex D/viii(Phorate sulphoxide)	-	-	-
5.4/Annex D/viii(Phorate sulfone)	-	-	-
5.4/Annex D/ix(2,4 –D)	-	-	-
5.4/Annex D/x(Butachlor)	-	-	-
5.4/Annex D/xi(Isoproturon)	-	-	-
5.4/Annex D/xii(Alachlor)	-	-	-
5.4/Annex D/xiii(Atrazine)	-	-	-
5.4/Annex D/xiv(Methyl parathion)	-	-	-
5.4/Annex D/xxvii(Methyl paraoxon)	-	-	-
5.4/Annex D/xv(Malathion)	-	-	-
5.4/Annex D/xxviii(Malaoxon)	-	-	-
5.4/Annex D/xvi(Aldrin)	-	-	-
5.4/Annex D/xvi(Dieldrin)	-	-	-
Cl-5.4 (ii)(Total pesticide residue)	-	-	-
Cl-5.4 (i)(Pesticide residues considered individually)	-	-	-
5.3(Appearance)	-	-	-
Cl-5.1(General Requirements)	-	-	-
5.4 i)(o,p DDT)	-	-	-
5.4 i)(p,p DDT)	-	-	-
5.4, i)(o,p DDE)	-	-	-
5.4 i)(p,p DDE)	-	-	-
5.4 i)(o,p DDD)	-	-	-
5.4 i)(p,p DDD)	-	-	-
5.4 i)(Gamma-HCH (Lindane))	-	-	-
5.4 i)(alpha-HCH)	-	-	-
5.4 i)(beta-HCH)	-	-	-
5.4 i)(Delta-HCH)	-	-	-
5.4 i)(alpha-Endosulfan)	-	-	-
5.4 i)(beta-Endosulfan)	-	-	-
5.4 i)(Endosulfan Sulphate)	-	-	-
5.4 i)(Monocrotophos)	-	-	-
5.4 i)(Ethion)	-	-	-
5.4 i)(Chlorpyrifos)	-	-	-
5.4 i)(Phorate)	-	-	-
5.4 i)(Phorate sulphoxide)	-	-	-
5.4 i)(Phorate sulphone)	-	-	-
5.4 i)(2,4-D)	-	-	-
5.4 i)(Butachlor)	-	-	-
5.4 i)(Isoproturon)	-	-	-
5.4 i)(Alachlor)	-	-	-
5.4 i)(Atrazine)	-	-	-
5.4 i)(Methyl Parathion)	-	-	-
5.4 i)(Methyl Paraoxon)	-	-	-
5.4 i)(Malathion)	-	-	-
5.4, i)("oxygen analogue of Malathion (Malaoxon)")	-	-	-
5.4 i)(Dieldrin)	-	-	-
Table 3, x)(Uranium)	-	-	-
5.4 i)(Aldrin)	-	-	-

31 Mar, 2027

-
Included w.e.f.20.12.2024

9078

FARE Labs Pvt. Ltd. (8166516), Gurugram

8166516

IS 13428 (2024)

PACKAGED NATURAL MINERAL WATER - SPECIFICATION Third Revision

6500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.2/Table 4/i(Alpha emitters, Bq/l, Max)	-	3250	30% Discount for BIS Sample
6.2/Table 4/ii(Beta emitters, Bq/l, Max)	-	3250	30% Discount for BIS Sample
6.2/Table 4/i(Alpha emitters, Bq/l, Max)	-	-	-
6.2/Table 4/ii(Beta emitters, Bq/l, Max)	-	-	-

25 Nov, 2026

-
Included w.e.f.19.12.2024 For Alpha Emitters and Beta Emitters only

9079

Indian Institute of Packaging (IIP), Delhi

8177901

IS 1848 : Part 1 (2018)

Writing and printing papers - Specification: Part 1 account book, azure lead, bond, cream laid and cream wove/printing white/printing coloured/printing offset, printing maplitho, printing white super calendered and typewriting types (Fifth Revision)

10400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4.2(Substance, Ref IS 1763)	-	600	-
Cl. 4.4(Size and tolerance on size)	-	550	CHARGES RATE ARE PER SIZE.
Cl. 4.5(pH)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Tensile index, Account book-CD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Tensile index, Account book-MD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Brightness ISO, Account book)	-	800	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Opacity, Account book)	-	800	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(One minute cobb test, Account book)	-	600	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Double fold, Account book-CD)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Double fold, Account book-MD)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Gloss, Account book)	-	800	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Wax pick, Account book)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Smoothness(Bendtsen),Account book)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Tear index, Account book-CD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Tear index, Account book-MD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Tensile index, Azure laid-CD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Tensile index, Azure laid-MD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Brightness ISO, Azure laid)	-	800	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Opacity,Azure laid)	-	800	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(One minute cobb test, Azure laid)	-	600	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Double fold, Azure laid-CD)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Double fold, Azure laid-MD)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Gloss, Azure laid)	-	800	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Wax pick, Azure laid)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Smoothness(Bendtsen),Azure laid)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Tear index, Azure laid-CD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Tear index, Azure laid-MD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Tensile index, Bond-CD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Tensile index, Bond-MD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Brightness ISO, Bond)	-	800	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Opacity, Bond)	-	800	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(One minute cobb test, Bond)	-	600	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Double fold, Bond-CD)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Double fold, Bond-MD)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Gloss, Bond)	-	800	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Wax pick, Bond)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Smoothness(Bendtsen),Bond)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Tear index, Bond-CD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Tear index, Bond-MD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Tensile index, Cream laid and cream wove/printing white/printing coloured/printing offset-CD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Tensile index, Cream laid and cream wove/printing white/printing coloured/printing offset-MD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Brightness ISO, Cream laid and cream wove/printing white/printing coloured/printing offset)	-	800	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Opacity, Cream laid and cream wove/printing white/printing coloured/printing offset)	-	800	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(One minute cobb test, Cream laid and cream wove/printing white/printing coloured/printing offset)	-	600	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Double fold, Cream laid and cream wove/printing white/printing coloured/printing offset-CD)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Double fold, Cream laid and cream wove/printing white/printing coloured/printing offset-MD)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Gloss, Cream laid and cream wove/printing white/printing coloured/printing offset)	-	800	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Wax pick, Cream laid and cream wove/printing white/printing coloured/printing offset)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Smoothness bendtsen, Cream laid and cream wove/printing white/printing coloured/printing offset)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Tear index, Cream laid and cream wove/printing white/printing coloured/printing offset-CD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Tear index, Cream laid and cream wove/printing white/printing coloured/printing offset-MD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Tensile index, Printing Maplitho-CD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Tensile index, Printing Maplitho-MD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Brightness ISO, Printing Maplitho)	-	800	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Opacity, Printing Maplitho)	-	800	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(One minute cobb test, Printing Maplitho)	-	600	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Double fold, Printing Maplitho-CD)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Double fold, Printing Maplitho-MD)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Gloss, Printing Maplitho)	-	800	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Wax pick, Printing Maplitho)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Smoothness bendtsen, Printing Maplitho)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Tear index, Printing Maplitho-CD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Tear index, Printing Maplitho-MD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Tensile index, Printing White Super Calendered-CD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Tensile index, Printing White Super Calendered-MD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Brightness ISO, Printing White Super Calendered)	-	800	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Opacity, Printing White Super Calendered)	-	800	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(One minute cobb test, Printing White Super Calendered)	-	600	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Double fold, Printing White Super Calendered-CD)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Double fold, Printing White Super Calendered-MD)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Gloss, Printing White Super Calendered)	-	800	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Wax pick, Printing White Super Calendered)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Smoothness bendtsen, Printing White Super Calendered)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Tear index, Printing White Super Calendered-CD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Tear index, Printing White Super Calendered-MD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Tensile index, Typewriting-CD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Tensile index, Typewriting-MD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Brightness ISO, Typewriting)	-	800	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Opacity, Typewriting)	-	800	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(One minute cobb test, Typewriting)	-	600	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Double fold, Typewriting-CD)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Double fold, Typewriting-MD)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Gloss, Typewriting)	-	800	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Wax pick, Typewriting)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Smoothness bendtsen, Typewriting)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Tear index, Typewriting-CD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Tear index, Typewriting-MD)	-	1200	-
Cl.4.2(Substance, Ref IS 1763)	-	600	-
Cl. 4.4(Size and tolerance on size)	-	550	CHARGES ARE AS PER SIZE.
Cl. 4.5(pH)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Tensile index, Account book-CD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Tensile index, Account book-MD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Brightness ISO, Account book)	-	800	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Opacity, Account book)	-	800	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(One minute cobb test, Account book)	-	600	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Double fold, Account book-CD)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Double fold, Account book-MD)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Gloss, Account book)	-	800	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Wax pick, Account book)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Smoothness(Bendtsen),Account book)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Tear index, Account book-CD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. i(Tear index, Account book-MD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Tensile index, Azure laid-CD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Tensile index, Azure laid-MD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Brightness ISO, Azure laid)	-	800	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Opacity,Azure laid)	-	800	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(One minute cobb test, Azure laid)	-	600	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Double fold, Azure laid-CD)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Double fold, Azure laid-MD)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Gloss, Azure laid)	-	800	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Wax pick, Azure laid)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Smoothness(Bendtsen),Azure laid)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Tear index, Azure laid-CD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. ii(Tear index, Azure laid-MD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Tensile index, Bond-CD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Tensile index, Bond-MD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Brightness ISO, Bond)	-	800	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Opacity, Bond)	-	800	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(One minute cobb test, Bond)	-	600	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Double fold, Bond-CD)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Double fold, Bond-MD)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Gloss, Bond)	-	800	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Wax pick, Bond)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Smoothness(Bendtsen),Bond)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Tear index, Bond-CD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iii(Tear index, Bond-MD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Tensile index, Cream laid and cream wove/printing white/printing coloured/printing offset-CD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Tensile index, Cream laid and cream wove/printing white/printing coloured/printing offset-MD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Brightness ISO, Cream laid and cream wove/printing white/printing coloured/printing offset)	-	800	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Opacity, Cream laid and cream wove/printing white/printing coloured/printing offset)	-	800	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(One minute cobb test, Cream laid and cream wove/printing white/printing coloured/printing offset)	-	600	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Double fold, Cream laid and cream wove/printing white/printing coloured/printing offset-CD)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Double fold, Cream laid and cream wove/printing white/printing coloured/printing offset-MD)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Gloss, Cream laid and cream wove/printing white/printing coloured/printing offset)	-	800	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Wax pick, Cream laid and cream wove/printing white/printing coloured/printing offset)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Smoothness bendtsen, Cream laid and cream wove/printing white/printing coloured/printing offset)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Tear index, Cream laid and cream wove/printing white/printing coloured/printing offset-CD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. iv(Tear index, Cream laid and cream wove/printing white/printing coloured/printing offset-MD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Tensile index, Printing Maplitho-CD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Tensile index, Printing Maplitho-MD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Brightness ISO, Printing Maplitho)	-	800	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Opacity, Printing Maplitho)	-	800	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(One minute cobb test, Printing Maplitho)	-	600	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Double fold, Printing Maplitho-CD)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Double fold, Printing Maplitho-MD)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Gloss, Printing Maplitho)	-	800	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Wax pick, Printing Maplitho)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Smoothness bendtsen, Printing Maplitho)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Tear index, Printing Maplitho-CD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. v(Tear index, Printing Maplitho-MD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Tensile index, Printing White Super Calendered-CD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Tensile index, Printing White Super Calendered-MD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Brightness ISO, Printing White Super Calendered)	-	800	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Opacity, Printing White Super Calendered)	-	800	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(One minute cobb test, Printing White Super Calendered)	-	600	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Double fold, Printing White Super Calendered-CD)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Double fold, Printing White Super Calendered-MD)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Gloss, Printing White Super Calendered)	-	800	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Wax pick, Printing White Super Calendered)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Smoothness bendtsen, Printing White Super Calendered)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Tear index, Printing White Super Calendered-CD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Tear index, Printing White Super Calendered-MD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vi(Tensile index, Typewriting-CD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Tensile index, Typewriting-MD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Brightness ISO, Typewriting)	-	800	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Opacity, Typewriting)	-	800	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(One minute cobb test, Typewriting)	-	600	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Double fold, Typewriting-CD)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Double fold, Typewriting-MD)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Gloss, Typewriting)	-	800	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Wax pick, Typewriting)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Smoothness bendtsen, Typewriting)	-	700	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Tear index, Typewriting-CD)	-	1200	-
Cl. 4.6,4.7,6.2, Table No. 1, Sl no. vii(Tear index, Typewriting-MD)	-	1200	-
Cl.4.1(Description)	-	550	-
Cl.4.2(Substance)	-	600	-
Cl.4.2.1(Tolerances on nominal substance)	-	600	-
Cl.4.3(Thickness)	-	550	-
Cl.4.4(Sizes and tolerances on sizes)	-	550	CHARGES ARE AS PER SIZE.
Cl.4.5(pH)	-	700	-
Table-1(i)(Tensile index, CD)	-	1200	-
Table-1(i)(Tensile index, MD)	-	1200	-
Table-1(ii)(Brightness, ISO)	-	800	-
Table-1(iii)(Opacity)	-	800	-
Table-1(iv)(One minute cobb test)	-	600	-
Table-1(v)(No of double fold, CD)	-	700	-
Table-1(v)(No of double fold, MD)	-	700	-
Table-1(vi)(Gloss)	-	800	-
Table-1(vii)(Wax pick)	-	1200	-
Table-1(viii)(Smoothness (Bendtsen))	-	700	-
Table-1(ix)(Tear index, CD)	-	1200	-
Table-1(ix)(Tear index, MD)	-	1200	-

-
-

9080

CIPET, Madurai

6139834

IS 17425 (2020)

Irrigation Equipment - Quick Coupled Polyethylene Pipes and Fittings for Sprinkler Irrigation Systems - Specification

40-200 mm

51425 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Dimensions of pipe - i) Outside diameter)	-	1500	Dimensions (OD,Wall Thickness & Ovality) 25 % Discount for BIS
5(Dimensions of pipe - ii) Wall thickness minimum)	-	500	25 % Discount for BIS
6(Visual Appearance)	-	500	25 % Discount for BIS
7.1(Hydraulic Characteristics - Quality test)	-	4800	25 % Discount for BIS
7.1(Hydraulic Characteristics - Acceptance test)	-	1600	25 % Discount for BIS
7.2(Reversion Test)	-	700	Specimen Prepration Charges 500/- 25 % Discount for BIS
7.3(Tensile Test- i) Tensile Strength)	-	1300	Specimen Prepration Charges 500/- 25 % Discount for BIS
7.3(Tensile Test - ii)Elongation at Break)	-	1300	Specimen Prepration Charges 500/- 25 % Discount for BIS
7.4(Fusion Compatibility Test- a) Quality test)	-	4800	25 % Discount for BIS Specimen Prepration Charges 500/-
7.4(Fusion Compatibility Test- b) Acceptance test)	-	1600	25 % Discount for BIS Specimen Prepration Charges 500/-
7.5(Density)	-	700	25 % Discount for BIS Specimen Prepration Charges 500/-
7.6(Melt Flow Rate)	-	1100	25 % Discount for BIS Specimen Prepration Charges 500/-
7.6(Melt Flow Rate)	-	1100	25 % Discount for BIS
4.2(Carbon black- a)carbon content)	-	925	25 % Discount for BIS
4.2(Carbon black- b) Dispersion of carbon black)	-	700	25 % Discount for BIS
7.6(Melt now Rate (MFR))	-	1100	25 % Discount for BIS
7.5(Density)	-	700	25 % Discount for BIS
7.4 Table-2(Fusion Compatibility Test)	-	1600	25 % Discount for BIS
7.3(Tensile Test)	-	1300	Specimen Preparation Charges 500/- 25 % Discount for BIS
7.2(Reversion Test)	-	700	Specimen Preparation Charges 500/- 25 % Discount for BIS
7.1 Table -2(Hydraulic Characteristics)	-	1600	25 % Discount for BIS
6.1(VISUAL APPEARANCE)	-	500	25 % Discount for BIS
5.1.2(Ovality)	-	500	25 % Discount for BIS
5.1 table -1(DIMENSIONS OF PIPES)	-	500	25 % Discount for BIS
4.3(Anti-oxidant)	-	2000	25 % Discount for BIS
Cl. 4.2 , IS 2530-1963, Cl. 10(Cabon Black Content)	-	925	25 % Discount for BIS
4.1.2(The MFR of the material shall be between 0.2 to 1.1 (both inclusive) when tested at 190 T at a nominal load of 50 N by the method prescribed in 7 of IS 2530. The MFR of the material shall also be within 20% of the value declared by the manufacturer.’)	-	1100	25 % Discount for BIS
4.1.1(density shall be between 940.4 kg/m’ and 958.4 kg/m3 (both inclusive) when determined at 27°C according to procedure prescribed in Annex A of IS 7328. The value of the density shall also not differ from the nominal value by more than 3 kg/m2 as per 5.2.1.1 of IS 7328.)	-	700	25 % Discount for BIS
4.1(melt flow rating (MFR) shall not exceed 1.10 g/10 min.)	-	1100	25 % Discount for BIS
3(CLASSIFICATION OF PIPES)	-	500	25 % Discount for BIS
4.1(Quick Coupled Male and Female Couplers)	-	1500	25 % Discount for BIS
4.1(Quick Coupled Male and Female Couplers)	-	1500	25 % Discount for BIS
4.1.3(Workmanship and appearance)	-	500	25 % Discount for BIS
4.1.4(Holding attachments for coupler parts)	-	1500	25 % Discount for BIS
6.1.3(Weldability Test- a) Quality test)	-	4800	25 % Discount for BIS
6.1.3(Weldability Test- b) Acceptance test)	-	1600	25 % Discount for BIS
3(Quick Coupled pipes)	-	1500	25 % Discount for BIS
3(QUICK COUPLED PIPES)	-	1500	25 % Discount for BIS
4(QUICK COUPLED FITTINGS)	-	1500	25 % Discount for BIS
4.1 (a)(Quick Coupled Male and Female Couplers)	-	1500	25 % Discount for BIS
Cl. 4.1.1.2.1, IS 14151 (P-1)-1999, Cl. 4, IS 2530-1963, Cl. 10(Cabon Black Content)	-	925	25 % Discount for BIS
Cl. 4.1.1.2.1, IS 14151 (P-1)-1999, Cl. 4, IS 2530-1963, Cl. 16(Carbon Black Dispersion)	-	700	25 % Discount for BIS
4.1 .1.2.1(HDPE couplers)	-	1500	Dimensions (OD,Wall Thickness & Ovality) 25 % Discount for BIS
4.1 .1.2.2(HDPE couplers)	-	1500	Dimensions (OD,Wall Thickness & Ovality) 25 % Discount for BIS
4.1.4(a)(Holding Attachments for Coupler Parts)	-	1500	Dimensions (OD,Wall Thickness & Ovality) 25 % Discount for BIS
4.1.4(b)(Holding Attachments for Coupler Parts)	-	1500	Dimensions (OD,Wall Thickness & Ovality) 25 % Discount for BIS
4.2.1(Quick Coupled ~pe HDPE Fittings)	-	1500	Dimensions (OD,Wall Thickness & Ovality) 25 % Discount for BIS
4.2.2(Quick Coupled ~pe HDPE Fittings)	-	1500	Dimensions (OD,Wall Thickness & Ovality) 25 % Discount for BIS
4.2.3(Quick Coupled ~pe HDPE Fittings)	-	1500	Dimensions (OD,Wall Thickness & Ovality) 25 % Discount for BIS
4.2.4(Quick Coupled ~pe HDPE Fittings)	-	1500	Dimensions (OD,Wall Thickness & Ovality) 25 % Discount for BIS
4.2.5(Quick Coupled ~pe HDPE Fittings)	-	1500	Dimensions (OD,Wall Thickness & Ovality) 25 % Discount for BIS
4.2.6(Quick Coupled ~pe HDPE Fittings)	-	1500	Dimensions (OD,Wall Thickness & Ovality) 25 % Discount for BIS
4.2.7(Quick Coupled ~pe HDPE Fittings)	-	1500	Dimensions (OD,Wall Thickness & Ovality) 25 % Discount for BIS
4.2.7(1 Dimensions of Quick Coupled Pipes and Fittings)	-	1500	Dimensions (OD,Wall Thickness & Ovality) 25 % Discount for BIS
4.2.7(Reducers Table 1 and 2 of IS 8008 (Part 4))	-	1500	Dimensions (OD,Wall Thickness & Ovality) 25 % Discount for BIS
4.2.7(Ferrule reducers Table 1 of IS 8008 (Part 5))	-	1500	Dimensions (OD,Wall Thickness & Ovality) 25 % Discount for BIS
4.2.7(Pipe ends Table 1 of IS 8008 (Part 6))	-	1500	Dimensions (OD,Wall Thickness & Ovality) 25 % Discount for BIS
4.2.7(End caps Table 1 of IS 8008 (Part 9))	-	1500	Dimensions (OD,Wall Thickness & Ovality) 25 % Discount for BIS
4.2.7(Insert vatve couplers Table 1 of IS 8008 (Part 3))	-	1500	Dimensions (OD,Wall Thickness & Ovality) 25 % Discount for BIS
4.2.7(Valve openers Table 1 of IS 8008 (Part 2))	-	1500	Dimensions (OD,Wall Thickness & Ovality) 25 % Discount for BIS
5.2(Dimensions of Quick Coupled Sprinkler Saddles Table 1.)	-	1500	Dimensions (OD,Wall Thickness & Ovality) 25 % Discount for BIS
6.1(Quick Coupled Pipes and Fittings)	-	1500	Dimensions (OD,Wall Thickness & Ovality) 25 % Discount for BIS
6.1.1, 6.1.1.1(Leakage Test)	-	850	25 % Discount for BIS
6.1.1, 6.1.1.1(Leakage Test)	-	850	25 % Discount for BIS
6.1.2, 6.1.2.1(Hydraulic Proof Test)	-	850	25 % Discount for BIS
6.1.2.2(Hydraulic Proof Test)	-	850	25 % Discount for BIS
6.1.2.2(Hydraulic Proof Test)	-	850	25 % Discount for BIS
6.1.3, 6.1.3.1(Weldability Test)	-	1600	25 % Discount for BIS
6.1.3.1.1(Weldability Test)	-	1600	25 % Discount for BIS
6.1.3.2(Quick coupled fittings)	-	1500	25 % Discount for BIS
6.2, 6.2.1(Quick Coupled Fittings)	-	1500	25 % Discount for BIS
7.2.1(Visual and Workmanship Requirement)	-	500	25 % Discount for BIS
6.2 b(Material Identification - Male & Female Coupler)	-	1050	25 % Discount for BIS
6.3.3(Material Identification - Insert Valve Coupler)	-	1050	25 % Discount for BIS
6.3.3(Material Identification - Insert Valve Coupler)	-	1050	25 % Discount for BIS
6.3.4()	-	500	25 % Discount for BIS
6.3.5(Material Identification - Saddle)	-	1100	25 % Discount for BIS
6.3.5(Material Identification - Pipe Ends)	-	1100	25 % Discount for BIS
6.3.6(Quick Coupled Pump Connectors - Visual)	-	500	25 % Discount for BIS
4.2(Metallic Couplers)	-	1500	Dimensions (OD,Wall Thickness & Ovality) 25 % Discount for BIS
4.2(Metallic Couplers)	-	1500	Dimensions (OD,Wall Thickness & Ovality) 25 % Discount for BIS
7.2.1(Leakage Test)	-	850	25 % Discount for BIS
Cl.4.1.3(Den sity Test)	-	700	25 % Discount for BIS
Cl.4.1.3(MFR Test)	-	1100	25 % Discount for BIS
Cl.4.1.3(MFR Test)	-	1100	25 % Discount for BIS
Cl.4.1.3(MFR Test)	-	1100	25 % Discount for BIS
Cl.4.1.3(MFR Test)	-	1100	25 % Discount for BIS
Cl.4.1.3(Thermal Stabi lity)	-	2200	25 % Discount for BIS
Cl.4.1.3(Thermal Stabi lity)	-	2200	25 % Discount for BIS
Cl.4.1.3, T-1(Volatile Matter)	-	700	25 % Discount for BIS
Cl.4.1.3, T-1(Volatile Matter)	-	700	25 % Discount for BIS
Cl.4.1.3, T-1(Volatile Matter)	-	700	25 % Discount for BIS
Cl.4.1.3, T-1(Volatile Matter)	-	700	25 % Discount for BIS
Cl.4.1.3, T-1(Volatile Matter)	-	700	25 % Discount for BIS
Cl.4.1.3, T-1(Volatile Matter)	-	700	25 % Discount for BIS
Cl.4.1.3, T-1(Volatile Matter)	-	700	25 % Discount for BIS
Cl.4.1.3, T-1(Water Content)	-	700	25 % Discount for BIS
Cl.4.1.3, T-1(Water Content)	-	700	25 % Discount for BIS
Cl.4.1.3, T-1(Water Content)	-	700	25 % Discount for BIS
Cl.4.1.3, T-1(Water Content)	-	700	25 % Discount for BIS
Cl.4.1.3, T-1(Water Content)	-	700	25 % Discount for BIS
Cl.4.1.3, T-1(Water Content)	-	700	25 % Discount for BIS
Cl.4.1.3, T-1(Water Content)	-	700	25 % Discount for BIS
Cl.4.1.3, T-1(Water Content)	-	700	25 % Discount for BIS
Cl.4.1.3, T-1(Water Content)	-	700	25 % Discount for BIS
Cl.4.1.3, T-1(Water Content)	-	700	25 % Discount for BIS
Cl.4.1.3, T-1(Water Content)	-	700	25 % Discount for BIS
Cl.4.1.3, T-1(Water Content)	-	700	25 % Discount for BIS
Cl.4.1.3, T-1(Water Content)	-	700	25 % Discount for BIS
Cl.4.1.3, T-1(Water Content)	-	700	25 % Discount for BIS
Cl.4.1.3, T-1(Water Content)	-	700	25 % Discount for BIS
Cl.4.1.3, T-1(Water Content)	-	700	25 % Discount for BIS
Cl.4.1.3, T-1(Water Content)	-	700	25 % Discount for BIS
Cl.4.1.3, T-1(Water Content)	-	700	25 % Discount for BIS
Cl.4.1.3, T-1(Water Content)	-	700	25 % Discount for BIS
Cl.4.1.4(Carbon Black Content)	-	925	25 % Discount for BIS
Cl.4.1.4(Carbon Black Content)	-	925	25 % Discount for BIS
Cl.4.1.4(Carbon Black Content)	-	925	25 % Discount for BIS
Cl.4.1.4(Carbon Black Di spersion)	-	700	25 % Discount for BIS
Cl.4.1.4(Carbon Black Di spersion)	-	700	25 % Discount for BIS
Cl.4.1.4(Carbon Black Di spersion)	-	700	25 % Discount for BIS
Cl.5(Di men sion)	-	1500	Dimensions (OD,Wall Thickness & Ovality) 25 % Discount for BIS
Cl.5.1.l(Outside Diameter)	-	1500	Dimensions (OD,Wall Thickness & Ovality) 25 % Discount for BIS
Cl.5.1.l(Outside Diameter)	-	1500	Dimensions (OD,Wall Thickness & Ovality) 25 % Discount for BIS
Cl.6.2.L(Wall Thickness)	-	500	25 % Discount for BIS
Cl.6.2.4(Workmanship and Appearance)	-	500	25 % Discount for BIS
Cl.6.2.6(Rubber Ring Hardness)	-	500	25 % Discount for BIS
Cl.6.2.6(Ageing Test)	-	4200	25 % Discount for BIS
Cl.7.1.l(Visual Anneara nce)	-	500	25 % Discount for BIS
Cl.7.1.2(Hydraulic Characteristic)	-	1600	25 % Discount for BIS
Cl.7.1.2(Hydraulic Characteristic)	-	1600	25 % Discount for BIS
Cl.7.1.2(Hydraulic Characteristic)	-	1600	25 % Discount for BIS
Cl.7.1.2(Hydraulic Characteristic)	-	1600	25 % Discount for BIS
Cl.7.1.3(Reversion Test)	-	700	Specimen Preparation Charges 500/- 25 % Discount for BIS
Cl.7.1.3(Reversion Test)	-	700	Specimen Preparation Charges 500/- 25 % Discount for BIS
Cl.7.1.4(Tensile Test)	-	1300	Specimen Preparation Charges 500/- 25 % Discount for BIS
Cl.7.1.4(Tensile Test)	-	1300	Specimen Preparation Charges 500/- 25 % Discount for BIS
Cl.7.1.4(Tensile Test)	-	1300	Specimen Preparation Charges 500/- 25 % Discount for BIS
Cl.7.1.4(Elongation)	-	1300	Specimen Preparation Charges 500/- 25 % Discount for BIS
Cl.7.1.4(Elongation)	-	1300	Specimen Preparation Charges 500/- 25 % Discount for BIS
Cl.7.1.5(Fusion Compatibility)	-	1600	25 % Discount for BIS
Cl.7.1.5(Fusion Compatibility)	-	1600	25 % Discount for BIS
Cl.7.1.5(Fusion Compatibility)	-	1600	25 % Discount for BIS
Cl.7.1.5(Fusion Compatibility)	-	1600	25 % Discount for BIS
Cl.7.1.6(Corrected Density)	-	700	25 % Discount for BIS
Cl.7.1.7(MFR Test)	-	1100	25 % Discount for BIS
Cl.7.1.7(MFR Test)	-	1100	25 % Discount for BIS
Cl.7.1.7(MFR Test)	-	1100	25 % Discount for BIS
Cl.7.1.7(MFR Test)	-	1100	25 % Discount for BIS
Cl.7.2.l(Leakage Test)	-	850	25 % Discount for BIS
Cl.7.2.l(Leakage Test)	-	850	25 % Discount for BIS
Cl.7.2.l(Leakage Test)	-	850	25 % Discount for BIS
Cl.7.2.l(Leakage Test)	-	850	25 % Discount for BIS
Cl.7.2.l(Leakage Test)	-	850	25 % Discount for BIS
Cl.7.2.2(Cl.7.2.2)	-	0	0
Cl.7.2.3(Weld ability Test)	-	1600	25 % Discount for BIS
Cl.7.2.3(Weld ability Test)	-	1600	25 % Discount for BIS
6.2 (iii) Rubber Rings (a) Shore hardness(Shore hardness)	-	500	25 % Discount for BIS
6.2 (iii) Rubber Rings (b) Accelerated Storage test(Accelerated Storage test)	-	500	25 % Discount for BIS
5(Dimensions of pipe (outside diameter, ovality, wall thickness))	-	1500	Dimensions (OD,Wall Thickness & Ovality) 25 % Discount for BIS
6.1(Thermal Stability (OIT))	-	2200	25 % Discount for BIS
6.1(Volatile Matter)	-	700	25 % Discount for BIS
6.1(Water content)	-	700	25 % Discount for BIS
6.1(Tensile strength at Yield & Elongation at break)	-	1300	Specimen Preparation Charges 500/- 25 % Discount for BIS
6.1(Carbon Black Content)	-	925	25 % Discount for BIS
6.1(Carbon Black Dispersion)	-	700	25 % Discount for BIS
6.2.1(Base Density x 2)	-	1400	25 % Discount for BIS
6.2.1(Melt Flow Index x 2)	-	2200	25 % Discount for BIS
6.2.1(Thermal Stability (OIT) x 2)	-	4400	25 % Discount for BIS
6.2.1(Volatile Matter x 2)	-	1400	25 % Discount for BIS
6.2.1(Water content x 2)	-	700	25 % Discount for BIS
6.2.1(Carbon Black Content x 2)	-	1400	25 % Discount for BIS
6.2.1(Carbon Black Dispersion x 2)	-	1400	25 % Discount for BIS
6.2.1(Wall thickness of male & female coupler)	-	500	25 % Discount for BIS
6.2.4(Workmanship and appearance (Visual))	-	500	25 % Discount for BIS
6.2.5(Holding attachment for coupler parts)	-	1500	25 % Discount for BIS
6.2.5(Material Composition (Chemical Analysis))	-	1050	25 % Discount for BIS
4.2.2(Coating thickness (Hot dip Galvanized or Electroplated or Passivated or Powder Coated))	-	500	25 % Discount for BIS
6.2.6(Material Identification (Chemical Analysis))	-	1050	25 % Discount for BIS
6.2.6(Color)	-	500	25 % Discount for BIS
6.2.6(Rubber Ring Hardness Shore – A (Before Ageing))	-	500	25 % Discount for BIS
6.2.6(Ageing Charges for rubber ring)	-	500	25 % Discount for BIS
7.1.1(Visual appearance of pipes)	-	500	25 % Discount for BIS
7.1.2(Hydraulic Characteristics)	-	1600	25 % Discount for BIS
7.1.2((a) Acceptance Test (48 hrs) / 80˚ C)	-	1600	25 % Discount for BIS
7.1.2((b) Type test ( 165 hrs) / 80˚ C)	-	1600	25 % Discount for BIS
7.1.3(Reversion)	-	700	Specimen Preparation Charges 500/- 25 % Discount for BIS
7.1.4(Tensile strength & elongation)	-	1300	Specimen Preparation Charges 500/- 25 % Discount for BIS
7.1.5(Fusion Compatibility test)	-	1600	25 % Discount for BIS
7.1.5((a) Acceptance Test (48 hrs) / 80˚ C)	-	1600	Specimen Preparation Charges 500/- 25 % Discount for BIS
7.1.5((b) Type test ( 165 hrs) / 80˚ C)	-	1600	Specimen Preparation Charges 500/- 25 % Discount for BIS
7.1.6(Corrected Density)	-	700	25 % Discount for BIS
7.1.6(Base Density)	-	700	25 % Discount for BIS
7.1.6(Carbon black Content)	-	925	25 % Discount for BIS
7.1.7(Melt Flow Rate (MFR))	-	1100	25 % Discount for BIS
7.2.1(Leakage test 1hour / 27°C)	-	850	25 % Discount for BIS
7.2.2(Hydraulic Proof test 1hour / 27°C)	-	850	Specimen Preparation Charges 500/- 25 % Discount for BIS
7.2.3((a) Acceptance Test (48 hrs) / 80˚ C)	-	1600	Specimen Preparation Charges 500/- 25 % Discount for BIS
7.2.3((b) Type test ( 165 hrs) / 80˚ C)	-	4800	Specimen Preparation Charges 500/- 25 % Discount for BIS
8(Supply of pipe (Visual))	-	500	25 % Discount for BIS
4.1.1 (Table-1)(Density)	-	700	25 % Discount for BIS
4.1.1 (Table-1)(Melt Flow Index)	-	1100	25 % Discount for BIS
4.1.1 (Table-1)(Oxidation Induction Time)	-	2200	25 % Discount for BIS
4.1.1 (Table-1)(Volatile Matter)	-	700	25 % Discount for BIS
4.1.1 (Table-1)(Water content)	-	700	25 % Discount for BIS
4.1.1 (Table-1)(Tensile strength at Yield & Elongation at break)	-	1300	Specimen Preparation Charges 500/- 25 % Discount for BIS
4.1.4(Carbon Black Content)	-	925	25 % Discount for BIS
4.1.4(Carbon Black Dispersion)	-	700	25 % Discount for BIS
4.1.1(Polyethylene material)	-	1100	25 % Discount for BIS
4.1.3, Table 1,(i)(Bass density)	-	700	25 % Discount for BIS
4.1.3, Table 1,(ii)(Melt flow rate)	-	1100	25 % Discount for BIS
4.1.3, Table 1,(iii)(Thermal stability)	-	2200	25 % Discount for BIS
4.1.3, Table 1,(iv)(Volatile matter)	-	700	25 % Discount for BIS
4.1.3, Table 1,(v)(Water content)	-	700	25 % Discount for BIS
4.1.3, Table 1,(vi)(Minimum tensile strength at yield)	-	1300	Specimen Preparation Charges 500/- 25 % Discount for BIS
4.1.3, Table 1,(vii)(Minimum elongation at break)	-	1300	Specimen Preparation Charges 500/- 25 % Discount for BIS
4.1.4(The Carbon Content and Dispersion)	-	1625	25 % Discount for BIS
4.1.5(Carbon Black Specification)	-	925	25 % Discount for BIS
4.1.6(Antioxidant)	-	2000	25 % Discount for BIS
4.1.7(Rework Material)	-	500	25 % Discount for BIS
4.2(Metallic Couplers)	-	500	25 % Discount for BIS
5.1, Table 1,(i)(Plain pipes)	-	500	25 % Discount for BIS
5.1, Table 1,(ii)(90° Bends and tee)	-	1500	Dimensions (OD,Wall Thickness & Ovality) 25 % Discount for BIS
5.1, Table 1,(iii)(Base pipe )	-	1500	Dimensions (OD,Wall Thickness & Ovality) 25 % Discount for BIS
5.1, Table 1,(iv)(PCN)	-	0	-
5.1, Table 1,(v)(Reducers, ferrule reducers)	-	1500	Dimensions (OD,Wall Thickness & Ovality) 25 % Discount for BIS
5.1, Table 1,(vi)(End caps, insert valve coupler, valve openers)	-	1500	Dimensions (OD,Wall Thickness & Ovality) 25 % Discount for BIS
5.1, Table 1,(vii)(Riser pipe and socket)	-	1500	Dimensions (OD,Wall Thickness & Ovality) 25 % Discount for BIS
7.1.1(Visual Appearance and Workmanship)	-	500	25 % Discount for BIS
7.1.2(Hydraulic Performance Characteristic)	-	1600	-
7.1.3(Reversion Test)	-	700	-
7.1.4(Tensile Test)	-	1300	-
7.1.5(Fusion Compatibility Test)	-	1600	-
7.1.6(Corrected Density)	-	700	-
7.1.7(Melt flow rate)	-	1100	-
7.2.1(Leakage Test)	-	850	-
7.2.2(Hydraulic Proof Test)	-	850	-
7.2.3(Weldability Test)	-	1600	-
7.3(Quick Couple Fitting)	-	1500	-
10(Marking)	-	500	-
5.1.2(Squareness)	-	500	-
Cl 6.3.5, Table 5 Dimension of Quick Coupled Sprinkler Saddles (Foot Batten)(Table 5 Dimension of Quick Coupled Sprinkler Saddles (Foot Batten))	-	1500	-
4.1 (b)(HDPE couplers —)	-	500	-
5(Dimensions of pipe - i) Outside diameter)	-	15000	-
5(Dimensions of pipe - ii) Wall thickness minimum)	-	500	-
6(Visual Appearance)	-	500	-
7.1(Hydraulic Characteristics - Quality test)	-	4800	-
7.1(Hydraulic Characteristics - Acceptance test)	-	1600	-
7.2(Reversion Test)	-	700	-
7.3(Tensile Test- i) Tensile Strength)	-	1300	-
7.3(Tensile Test - ii)Elongation at Break)	-	1300	-
7.4(Fusion Compatibility Test- a) Quality test)	-	1600	-
7.4(Fusion Compatibility Test- b) Acceptance test)	-	1600	-
7.5(Density)	-	700	-
7.6(Melt Flow Rate)	-	1100	-
7.6(Melt Flow Rate)	-	1100	-
4.2(Carbon black- a)carbon content)	-	925	-
4.2(Carbon black- b) Dispersion of carbon black)	-	700	-
7.6(Melt now Rate (MFR))	-	925	-
7.5(Density)	-	700	-
7.4 Table-2(Fusion Compatibility Test)	-	1600	-
7.3(Tensile Test)	-	1300	-
7.2(Reversion Test)	-	700	-
7.1 Table -2(Hydraulic Characteristics)	-	1600	-
6.1(VISUAL APPEARANCE)	-	500	-
5.1.2(Ovality)	-	500	-
5.1 table -1(DIMENSIONS OF PIPES)	-	1500	-
4.3(Anti-oxidant)	-	500	-
Cl. 4.2 , IS 2530-1963, Cl. 10(Cabon Black Content)	-	925	-
4.1.2(The MFR of the material shall be between 0.2 to 1.1 (both inclusive) when tested at 190 T at a nominal load of 50 N by the method prescribed in 7 of IS 2530. The MFR of the material shall also be within 20% of the value declared by the manufacturer.’)	-	2200	-
4.1.1(density shall be between 940.4 kg/m’ and 958.4 kg/m3 (both inclusive) when determined at 27°C according to procedure prescribed in Annex A of IS 7328. The value of the density shall also not differ from the nominal value by more than 3 kg/m2 as per 5.2.1.1 of IS 7328.)	-	700	-
4.1(melt flow rating (MFR) shall not exceed 1.10 g/10 min.)	-	1100	-
3(CLASSIFICATION OF PIPES)	-	500	-
4.1(Quick Coupled Male and Female Couplers)	-	500	-
4.1(Quick Coupled Male and Female Couplers)	-	500	-
4.1.3(Workmanship and appearance)	-	500	-
4.1.4(Holding attachments for coupler parts)	-	500	-
6.1.3(Weldability Test- a) Quality test)	-	1600	-
6.1.3(Weldability Test- b) Acceptance test)	-	1600	-
3(Quick Coupled pipes)	-	1500	-
3(QUICK COUPLED PIPES)	-	1500	-
4(QUICK COUPLED FITTINGS)	-	1500	-
4.1 (a)(Quick Coupled Male and Female Couplers)	-	1500	-
Cl. 4.1.1.2.1, IS 14151 (P-1)-1999, Cl. 4, IS 2530-1963, Cl. 10(Cabon Black Content)	-	925	-
Cl. 4.1.1.2.1, IS 14151 (P-1)-1999, Cl. 4, IS 2530-1963, Cl. 16(Carbon Black Dispersion)	-	700	-
4.1 .1.2.1(HDPE couplers)	-	1500	-
4.1 .1.2.2(HDPE couplers)	-	1500	-
4.1.4(a)(Holding Attachments for Coupler Parts)	-	1500	-
4.1.4(b)(Holding Attachments for Coupler Parts)	-	1500	-
4.2.1(Quick Coupled ~pe HDPE Fittings)	-	1500	-
4.2.2(Quick Coupled ~pe HDPE Fittings)	-	1500	-
4.2.3(Quick Coupled ~pe HDPE Fittings)	-	1500	-
4.2.4(Quick Coupled ~pe HDPE Fittings)	-	1500	-
4.2.5(Quick Coupled ~pe HDPE Fittings)	-	1500	-
4.2.6(Quick Coupled ~pe HDPE Fittings)	-	1500	-
4.2.7(Quick Coupled ~pe HDPE Fittings)	-	1500	-
4.2.7(1 Dimensions of Quick Coupled Pipes and Fittings)	-	1500	-
4.2.7(Reducers Table 1 and 2 of IS 8008 (Part 4))	-	1500	-
4.2.7(Ferrule reducers Table 1 of IS 8008 (Part 5))	-	1500	-
4.2.7(Pipe ends Table 1 of IS 8008 (Part 6))	-	1500	-
4.2.7(End caps Table 1 of IS 8008 (Part 9))	-	1500	-
4.2.7(Insert vatve couplers Table 1 of IS 8008 (Part 3))	-	1500	-
4.2.7(Valve openers Table 1 of IS 8008 (Part 2))	-	1500	-
5.2(Dimensions of Quick Coupled Sprinkler Saddles Table 1.)	-	1500	-
6.1(Quick Coupled Pipes and Fittings)	-	1500	-
6.1.1, 6.1.1.1(Leakage Test)	-	850	-
6.1.1, 6.1.1.1(Leakage Test)	-	850	-
6.1.2, 6.1.2.1(Hydraulic Proof Test)	-	850	-
6.1.2.2(Hydraulic Proof Test)	-	850	-
6.1.2.2(Hydraulic Proof Test)	-	850	-
6.1.3, 6.1.3.1(Weldability Test)	-	1600	-
6.1.3.1.1(Weldability Test)	-	1600	-
6.1.3.2(Quick coupled fittings)	-	1500	-
6.2, 6.2.1(Quick Coupled Fittings)	-	1500	-
7.2.1(Visual and Workmanship Requirement)	-	500	-
6.2 b(Material Identification - Male & Female Coupler)	-	1050	-
6.3.3(Material Identification - Insert Valve Coupler)	-	1050	-
6.3.3(Material Identification - Insert Valve Coupler)	-	1050	-
6.3.4()	-	0	-
6.3.5(Material Identification - Saddle)	-	1050	-
6.3.5(Material Identification - Pipe Ends)	-	1050	-
6.3.6(Quick Coupled Pump Connectors - Visual)	-	500	-
4.2(Metallic Couplers)	-	500	-
4.2(Metallic Couplers)	-	500	-
7.2.1(Leakage Test)	-	850	-
Cl.4.1.3(Den sity Test)	-	700	-
Cl.4.1.3(MFR Test)	-	1100	-
Cl.4.1.3(MFR Test)	-	1100	-
Cl.4.1.3(MFR Test)	-	1100	-
Cl.4.1.3(MFR Test)	-	1100	-
Cl.4.1.3(Thermal Stabi lity)	-	2200	-
Cl.4.1.3(Thermal Stabi lity)	-	2200	-
Cl.4.1.3, T-1(Volatile Matter)	-	700	-
Cl.4.1.3, T-1(Volatile Matter)	-	700	-
Cl.4.1.3, T-1(Volatile Matter)	-	700	-
Cl.4.1.3, T-1(Volatile Matter)	-	700	-
Cl.4.1.3, T-1(Volatile Matter)	-	700	-
Cl.4.1.3, T-1(Volatile Matter)	-	700	-
Cl.4.1.3, T-1(Volatile Matter)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.4(Carbon Black Content)	-	925	-
Cl.4.1.4(Carbon Black Content)	-	925	-
Cl.4.1.4(Carbon Black Content)	-	925	-
Cl.4.1.4(Carbon Black Di spersion)	-	700	-
Cl.4.1.4(Carbon Black Di spersion)	-	700	-
Cl.4.1.4(Carbon Black Di spersion)	-	700	-
Cl.5(Di men sion)	-	1500	-
Cl.5.1.l(Outside Diameter)	-	1500	-
Cl.5.1.l(Outside Diameter)	-	1500	-
Cl.6.2.L(Wall Thickness)	-	500	-
Cl.6.2.4(Workmanship and Appearance)	-	500	-
Cl.6.2.6(Rubber Ring Hardness)	-	500	-
Cl.6.2.6(Ageing Test)	-	4200	-
Cl.7.1.l(Visual Anneara nce)	-	500	-
Cl.7.1.2(Hydraulic Characteristic)	-	1600	-
Cl.7.1.2(Hydraulic Characteristic)	-	1600	-
Cl.7.1.2(Hydraulic Characteristic)	-	1600	-
Cl.7.1.2(Hydraulic Characteristic)	-	1600	-
Cl.7.1.3(Reversion Test)	-	700	-
Cl.7.1.3(Reversion Test)	-	700	-
Cl.7.1.4(Tensile Test)	-	1300	-
Cl.7.1.4(Tensile Test)	-	1300	-
Cl.7.1.4(Tensile Test)	-	1300	-
Cl.7.1.4(Elongation)	-	1300	-
Cl.7.1.4(Elongation)	-	1300	-
Cl.7.1.5(Fusion Compatibility)	-	1600	-
Cl.7.1.5(Fusion Compatibility)	-	1600	-
Cl.7.1.5(Fusion Compatibility)	-	1600	-
Cl.7.1.5(Fusion Compatibility)	-	1600	-
Cl.7.1.6(Corrected Density)	-	700	-
Cl.7.1.7(MFR Test)	-	1100	-
Cl.7.1.7(MFR Test)	-	1100	-
Cl.7.1.7(MFR Test)	-	1100	-
Cl.7.1.7(MFR Test)	-	1100	-
Cl.7.2.l(Leakage Test)	-	850	-
Cl.7.2.l(Leakage Test)	-	850	-
Cl.7.2.l(Leakage Test)	-	850	-
Cl.7.2.l(Leakage Test)	-	850	-
Cl.7.2.l(Leakage Test)	-	850	-
Cl.7.2.2(Cl.7.2.2)	-	0	-
Cl.7.2.3(Weld ability Test)	-	1600	-
Cl.7.2.3(Weld ability Test)	-	1600	-
6.2 (iii) Rubber Rings (a) Shore hardness(Shore hardness)	-	500	-
6.2 (iii) Rubber Rings (b) Accelerated Storage test(Accelerated Storage test)	-	500	-
5(Dimensions of pipe (outside diameter, ovality, wall thickness))	-	1500	-
6.1(Thermal Stability (OIT))	-	2200	-
6.1(Volatile Matter)	-	700	-
6.1(Water content)	-	700	-
6.1(Tensile strength at Yield & Elongation at break)	-	1300	-
6.1(Carbon Black Content)	-	925	-
6.1(Carbon Black Dispersion)	-	700	-
6.2.1(Base Density x 2)	-	1400	-
6.2.1(Melt Flow Index x 2)	-	2200	-
6.2.1(Thermal Stability (OIT) x 2)	-	4400	-
6.2.1(Volatile Matter x 2)	-	1400	-
6.2.1(Water content x 2)	-	1400	-
6.2.1(Carbon Black Content x 2)	-	1850	-
6.2.1(Carbon Black Dispersion x 2)	-	1400	-
6.2.1(Wall thickness of male & female coupler)	-	500	-
6.2.4(Workmanship and appearance (Visual))	-	500	-
6.2.5(Holding attachment for coupler parts)	-	1500	-
6.2.5(Material Composition (Chemical Analysis))	-	1050	-
4.2.2(Coating thickness (Hot dip Galvanized or Electroplated or Passivated or Powder Coated))	-	500	-
6.2.6(Material Identification (Chemical Analysis))	-	500	-
6.2.6(Color)	-	500	-
6.2.6(Rubber Ring Hardness Shore – A (Before Ageing))	-	500	-
6.2.6(Ageing Charges for rubber ring)	-	4200	-
7.1.1(Visual appearance of pipes)	-	500	-
7.1.2(Hydraulic Characteristics)	-	1600	-
7.1.2((a) Acceptance Test (48 hrs) / 80˚ C)	-	1600	-
7.1.2((b) Type test ( 165 hrs) / 80˚ C)	-	4800	-
7.1.3(Reversion)	-	700	-
7.1.4(Tensile strength & elongation)	-	1300	-
7.1.5(Fusion Compatibility test)	-	1600	-
7.1.5((a) Acceptance Test (48 hrs) / 80˚ C)	-	1600	-
7.1.5((b) Type test ( 165 hrs) / 80˚ C)	-	4800	-
7.1.6(Corrected Density)	-	700	-
7.1.6(Base Density)	-	700	-
7.1.6(Carbon black Content)	-	925	-
7.1.7(Melt Flow Rate (MFR))	-	1100	-
7.2.1(Leakage test 1hour / 27°C)	-	850	-
7.2.2(Hydraulic Proof test 1hour / 27°C)	-	1600	-
7.2.3((a) Acceptance Test (48 hrs) / 80˚ C)	-	1600	-
7.2.3((b) Type test ( 165 hrs) / 80˚ C)	-	4800	-
8(Supply of pipe (Visual))	-	500	-
4.1.1 (Table-1)(Density)	-	700	-
4.1.1 (Table-1)(Melt Flow Index)	-	1100	-
4.1.1 (Table-1)(Oxidation Induction Time)	-	2200	-
4.1.1 (Table-1)(Volatile Matter)	-	700	-
4.1.1 (Table-1)(Water content)	-	700	-
4.1.1 (Table-1)(Tensile strength at Yield & Elongation at break)	-	1300	-
4.1.4(Carbon Black Content)	-	950	-
4.1.4(Carbon Black Dispersion)	-	700	-
4.1.1(Polyethylene material)	-	1100	-
4.1.3, Table 1,(i)(Bass density)	-	700	-
4.1.3, Table 1,(ii)(Melt flow rate)	-	1100	-
4.1.3, Table 1,(iii)(Thermal stability)	-	2200	-
4.1.3, Table 1,(iv)(Volatile matter)	-	700	-
4.1.3, Table 1,(v)(Water content)	-	700	-
4.1.3, Table 1,(vi)(Minimum tensile strength at yield)	-	1300	-
4.1.3, Table 1,(vii)(Minimum elongation at break)	-	1300	-
4.1.4(The Carbon Content and Dispersion)	-	700	-
4.1.5(Carbon Black Specification)	-	700	-
4.1.6(Antioxidant)	-	2000	-
4.1.7(Rework Material)	-	500	-
4.2(Metallic Couplers)	-	1500	-
5.1, Table 1,(i)(Plain pipes)	-	1500	-
5.1, Table 1,(ii)(90° Bends and tee)	-	1500	-
5.1, Table 1,(iii)(Base pipe )	-	1500	-
5.1, Table 1,(iv)(PCN)	-	0	-
5.1, Table 1,(v)(Reducers, ferrule reducers)	-	500	-
5.1, Table 1,(vi)(End caps, insert valve coupler, valve openers)	-	500	-
5.1, Table 1,(vii)(Riser pipe and socket)	-	500	-
7.1.1(Visual Appearance and Workmanship)	-	500	-
7.1.2(Hydraulic Performance Characteristic)	-	1600	-
7.1.3(Reversion Test)	-	700	-
7.1.4(Tensile Test)	-	1300	-
7.1.5(Fusion Compatibility Test)	-	1600	-
7.1.6(Corrected Density)	-	700	-
7.1.7(Melt flow rate)	-	1100	-
7.2.1(Leakage Test)	-	850	-
7.2.2(Hydraulic Proof Test)	-	850	-
7.2.3(Weldability Test)	-	1600	-
7.3(Quick Couple Fitting)	-	1500	-
10(Marking)	-	500	-
5.1.2(Squareness)	-	500	-
Cl 6.3.5, Table 5 Dimension of Quick Coupled Sprinkler Saddles (Foot Batten)(Table 5 Dimension of Quick Coupled Sprinkler Saddles (Foot Batten))	-	1500	-
4.1 (b)(HDPE couplers —)	-	1500	-
5(Dimensions of pipe - i) Outside diameter)	-	1500	-
5(Dimensions of pipe - ii) Wall thickness minimum)	-	1500	-
6(Visual Appearance)	-	500	-
7.1(Hydraulic Characteristics - Quality test)	-	1600	-
7.1(Hydraulic Characteristics - Acceptance test)	-	1600	-
7.2(Reversion Test)	-	700	-
7.3(Tensile Test- i) Tensile Strength)	-	1300	-
7.3(Tensile Test - ii)Elongation at Break)	-	1300	-
7.4(Fusion Compatibility Test- a) Quality test)	-	1600	-
7.4(Fusion Compatibility Test- b) Acceptance test)	-	1600	-
7.5(Density)	-	700	-
7.6(Melt Flow Rate)	-	1100	-
7.6(Melt Flow Rate)	-	1100	-
4.2(Carbon black- a)carbon content)	-	925	-
4.2(Carbon black- b) Dispersion of carbon black)	-	700	-
7.6(Melt now Rate (MFR))	-	1100	-
7.5(Density)	-	700	-
7.4 Table-2(Fusion Compatibility Test)	-	1600	-
7.3(Tensile Test)	-	1300	-
7.2(Reversion Test)	-	700	-
7.1 Table -2(Hydraulic Characteristics)	-	1600	-
6.1(VISUAL APPEARANCE)	-	500	-
5.1.2(Ovality)	-	500	-
5.1 table -1(DIMENSIONS OF PIPES)	-	1500	-
4.3(Anti-oxidant)	-	200	-
Cl. 4.2 , IS 2530-1963, Cl. 10(Cabon Black Content)	-	950	-
4.1.2(The MFR of the material shall be between 0.2 to 1.1 (both inclusive) when tested at 190 T at a nominal load of 50 N by the method prescribed in 7 of IS 2530. The MFR of the material shall also be within 20% of the value declared by the manufacturer.’)	-	1100	-
4.1.1(density shall be between 940.4 kg/m’ and 958.4 kg/m3 (both inclusive) when determined at 27°C according to procedure prescribed in Annex A of IS 7328. The value of the density shall also not differ from the nominal value by more than 3 kg/m2 as per 5.2.1.1 of IS 7328.)	-	700	-
4.1(melt flow rating (MFR) shall not exceed 1.10 g/10 min.)	-	1100	-
3(CLASSIFICATION OF PIPES)	-	500	-
4.1(Quick Coupled Male and Female Couplers)	-	500	-
4.1(Quick Coupled Male and Female Couplers)	-	500	-
4.1.3(Workmanship and appearance)	-	500	-
4.1.4(Holding attachments for coupler parts)	-	500	-
6.1.3(Weldability Test- a) Quality test)	-	4800	-
6.1.3(Weldability Test- b) Acceptance test)	-	1600	-
3(Quick Coupled pipes)	-	1500	-
3(QUICK COUPLED PIPES)	-	1500	-
4(QUICK COUPLED FITTINGS)	-	1500	-
4.1 (a)(Quick Coupled Male and Female Couplers)	-	1500	-
Cl. 4.1.1.2.1, IS 14151 (P-1)-1999, Cl. 4, IS 2530-1963, Cl. 10(Cabon Black Content)	-	950	-
Cl. 4.1.1.2.1, IS 14151 (P-1)-1999, Cl. 4, IS 2530-1963, Cl. 16(Carbon Black Dispersion)	-	700	-
4.1 .1.2.1(HDPE couplers)	-	1500	-
4.1 .1.2.2(HDPE couplers)	-	1500	-
4.1.4(a)(Holding Attachments for Coupler Parts)	-	1500	-
4.1.4(b)(Holding Attachments for Coupler Parts)	-	1500	-
4.2.1(Quick Coupled ~pe HDPE Fittings)	-	1500	-
4.2.2(Quick Coupled ~pe HDPE Fittings)	-	1500	-
4.2.3(Quick Coupled ~pe HDPE Fittings)	-	1500	-
4.2.4(Quick Coupled ~pe HDPE Fittings)	-	1500	-
4.2.5(Quick Coupled ~pe HDPE Fittings)	-	1500	-
4.2.6(Quick Coupled ~pe HDPE Fittings)	-	1500	-
4.2.7(Quick Coupled ~pe HDPE Fittings)	-	1500	-
4.2.7(1 Dimensions of Quick Coupled Pipes and Fittings)	-	1500	-
4.2.7(Reducers Table 1 and 2 of IS 8008 (Part 4))	-	1500	-
4.2.7(Ferrule reducers Table 1 of IS 8008 (Part 5))	-	1500	-
4.2.7(Pipe ends Table 1 of IS 8008 (Part 6))	-	1500	-
4.2.7(End caps Table 1 of IS 8008 (Part 9))	-	1500	-
4.2.7(Insert vatve couplers Table 1 of IS 8008 (Part 3))	-	1500	-
4.2.7(Valve openers Table 1 of IS 8008 (Part 2))	-	1500	-
5.2(Dimensions of Quick Coupled Sprinkler Saddles Table 1.)	-	1500	-
6.1(Quick Coupled Pipes and Fittings)	-	1500	-
6.1.1, 6.1.1.1(Leakage Test)	-	850	-
6.1.1, 6.1.1.1(Leakage Test)	-	850	-
6.1.2, 6.1.2.1(Hydraulic Proof Test)	-	850	-
6.1.2.2(Hydraulic Proof Test)	-	850	-
6.1.2.2(Hydraulic Proof Test)	-	850	-
6.1.3, 6.1.3.1(Weldability Test)	-	1600	-
6.1.3.1.1(Weldability Test)	-	1600	-
6.1.3.2(Quick coupled fittings)	-	1500	-
6.2, 6.2.1(Quick Coupled Fittings)	-	1500	-
7.2.1(Visual and Workmanship Requirement)	-	500	-
6.2 b(Material Identification - Male & Female Coupler)	-	1050	-
6.3.3(Material Identification - Insert Valve Coupler)	-	1050	-
6.3.3(Material Identification - Insert Valve Coupler)	-	1050	-
6.3.4()	-	0	-
6.3.5(Material Identification - Saddle)	-	1050	-
6.3.5(Material Identification - Pipe Ends)	-	1050	-
6.3.6(Quick Coupled Pump Connectors - Visual)	-	1050	-
4.2(Metallic Couplers)	-	1050	-
4.2(Metallic Couplers)	-	1050	-
7.2.1(Leakage Test)	-	850	-
Cl.4.1.3(Den sity Test)	-	700	-
Cl.4.1.3(MFR Test)	-	1100	-
Cl.4.1.3(MFR Test)	-	1100	-
Cl.4.1.3(MFR Test)	-	1100	-
Cl.4.1.3(MFR Test)	-	1100	-
Cl.4.1.3(Thermal Stabi lity)	-	2200	-
Cl.4.1.3(Thermal Stabi lity)	-	2200	-
Cl.4.1.3, T-1(Volatile Matter)	-	700	-
Cl.4.1.3, T-1(Volatile Matter)	-	700	-
Cl.4.1.3, T-1(Volatile Matter)	-	700	-
Cl.4.1.3, T-1(Volatile Matter)	-	700	-
Cl.4.1.3, T-1(Volatile Matter)	-	700	-
Cl.4.1.3, T-1(Volatile Matter)	-	700	-
Cl.4.1.3, T-1(Volatile Matter)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.4(Carbon Black Content)	-	925	-
Cl.4.1.4(Carbon Black Content)	-	700	-
Cl.4.1.4(Carbon Black Content)	-	925	-
Cl.4.1.4(Carbon Black Di spersion)	-	700	-
Cl.4.1.4(Carbon Black Di spersion)	-	700	-
Cl.4.1.4(Carbon Black Di spersion)	-	700	-
Cl.5(Di men sion)	-	1500	-
Cl.5.1.l(Outside Diameter)	-	500	-
Cl.5.1.l(Outside Diameter)	-	500	-
Cl.6.2.L(Wall Thickness)	-	500	-
Cl.6.2.4(Workmanship and Appearance)	-	500	-
Cl.6.2.6(Rubber Ring Hardness)	-	500	-
Cl.6.2.6(Ageing Test)	-	4200	-
Cl.7.1.l(Visual Anneara nce)	-	500	-
Cl.7.1.2(Hydraulic Characteristic)	-	1600	-
Cl.7.1.2(Hydraulic Characteristic)	-	1600	-
Cl.7.1.2(Hydraulic Characteristic)	-	1600	-
Cl.7.1.2(Hydraulic Characteristic)	-	1600	-
Cl.7.1.3(Reversion Test)	-	700	-
Cl.7.1.3(Reversion Test)	-	700	-
Cl.7.1.4(Tensile Test)	-	1300	-
Cl.7.1.4(Tensile Test)	-	1300	-
Cl.7.1.4(Tensile Test)	-	1300	-
Cl.7.1.4(Elongation)	-	1300	-
Cl.7.1.4(Elongation)	-	1300	-
Cl.7.1.5(Fusion Compatibility)	-	1600	-
Cl.7.1.5(Fusion Compatibility)	-	1600	-
Cl.7.1.5(Fusion Compatibility)	-	1600	-
Cl.7.1.5(Fusion Compatibility)	-	1600	-
Cl.7.1.6(Corrected Density)	-	700	-
Cl.7.1.7(MFR Test)	-	1100	-
Cl.7.1.7(MFR Test)	-	1100	-
Cl.7.1.7(MFR Test)	-	1100	-
Cl.7.1.7(MFR Test)	-	1100	-
Cl.7.2.l(Leakage Test)	-	850	-
Cl.7.2.l(Leakage Test)	-	850	-
Cl.7.2.l(Leakage Test)	-	850	-
Cl.7.2.l(Leakage Test)	-	850	-
Cl.7.2.l(Leakage Test)	-	850	-
Cl.7.2.2(Cl.7.2.2)	-	0	-
Cl.7.2.3(Weld ability Test)	-	1600	-
Cl.7.2.3(Weld ability Test)	-	1600	-
6.2 (iii) Rubber Rings (a) Shore hardness(Shore hardness)	-	500	-
6.2 (iii) Rubber Rings (b) Accelerated Storage test(Accelerated Storage test)	-	4200	-
5(Dimensions of pipe (outside diameter, ovality, wall thickness))	-	1500	-
6.1(Thermal Stability (OIT))	-	2200	-
6.1(Volatile Matter)	-	700	-
6.1(Water content)	-	700	-
6.1(Tensile strength at Yield & Elongation at break)	-	700	-
6.1(Carbon Black Content)	-	700	-
6.1(Carbon Black Dispersion)	-	700	-
6.2.1(Base Density x 2)	-	1400	-
6.2.1(Melt Flow Index x 2)	-	2200	-
6.2.1(Thermal Stability (OIT) x 2)	-	4400	-
6.2.1(Volatile Matter x 2)	-	1400	-
6.2.1(Water content x 2)	-	1400	-
6.2.1(Carbon Black Content x 2)	-	1850	-
6.2.1(Carbon Black Dispersion x 2)	-	1400	-
6.2.1(Wall thickness of male & female coupler)	-	1000	-
6.2.4(Workmanship and appearance (Visual))	-	500	-
6.2.5(Holding attachment for coupler parts)	-	1500	-
6.2.5(Material Composition (Chemical Analysis))	-	1050	-
4.2.2(Coating thickness (Hot dip Galvanized or Electroplated or Passivated or Powder Coated))	-	500	-
6.2.6(Material Identification (Chemical Analysis))	-	1050	-
6.2.6(Color)	-	500	-
6.2.6(Rubber Ring Hardness Shore – A (Before Ageing))	-	500	-
6.2.6(Ageing Charges for rubber ring)	-	4200	-
7.1.1(Visual appearance of pipes)	-	500	-
7.1.2(Hydraulic Characteristics)	-	1300	-
7.1.2((a) Acceptance Test (48 hrs) / 80˚ C)	-	1600	-
7.1.2((b) Type test ( 165 hrs) / 80˚ C)	-	4800	-
7.1.3(Reversion)	-	700	-
7.1.4(Tensile strength & elongation)	-	1300	-
7.1.5(Fusion Compatibility test)	-	1600	-
7.1.5((a) Acceptance Test (48 hrs) / 80˚ C)	-	1600	-
7.1.5((b) Type test ( 165 hrs) / 80˚ C)	-	4800	-
7.1.6(Corrected Density)	-	700	-
7.1.6(Base Density)	-	700	-
7.1.6(Carbon black Content)	-	950	-
7.1.7(Melt Flow Rate (MFR))	-	1100	-
7.2.1(Leakage test 1hour / 27°C)	-	850	-
7.2.2(Hydraulic Proof test 1hour / 27°C)	-	850	-
7.2.3((a) Acceptance Test (48 hrs) / 80˚ C)	-	1600	-
7.2.3((b) Type test ( 165 hrs) / 80˚ C)	-	4800	-
8(Supply of pipe (Visual))	-	500	-
4.1.1 (Table-1)(Density)	-	700	-
4.1.1 (Table-1)(Melt Flow Index)	-	1100	-
4.1.1 (Table-1)(Oxidation Induction Time)	-	2200	-
4.1.1 (Table-1)(Volatile Matter)	-	700	-
4.1.1 (Table-1)(Water content)	-	700	-
4.1.1 (Table-1)(Tensile strength at Yield & Elongation at break)	-	1300	-
4.1.4(Carbon Black Content)	-	925	-
4.1.4(Carbon Black Dispersion)	-	700	-
4.1.1(Polyethylene material)	-	1050	-
4.1.3, Table 1,(i)(Bass density)	-	700	-
4.1.3, Table 1,(ii)(Melt flow rate)	-	1100	-
4.1.3, Table 1,(iii)(Thermal stability)	-	2200	-
4.1.3, Table 1,(iv)(Volatile matter)	-	700	-
4.1.3, Table 1,(v)(Water content)	-	700	-
4.1.3, Table 1,(vi)(Minimum tensile strength at yield)	-	1300	-
4.1.3, Table 1,(vii)(Minimum elongation at break)	-	1300	-
4.1.4(The Carbon Content and Dispersion)	-	700	-
4.1.5(Carbon Black Specification)	-	500	-
4.1.6(Antioxidant)	-	2000	-
4.1.7(Rework Material)	-	500	-
4.2(Metallic Couplers)	-	500	-
5.1, Table 1,(i)(Plain pipes)	-	500	-
5.1, Table 1,(ii)(90° Bends and tee)	-	500	-
5.1, Table 1,(iii)(Base pipe )	-	500	-
5.1, Table 1,(iv)(PCN)	-	0	-
5.1, Table 1,(v)(Reducers, ferrule reducers)	-	500	-
5.1, Table 1,(vi)(End caps, insert valve coupler, valve openers)	-	500	-
5.1, Table 1,(vii)(Riser pipe and socket)	-	500	-
7.1.1(Visual Appearance and Workmanship)	-	500	-
7.1.2(Hydraulic Performance Characteristic)	-	1600	-
7.1.3(Reversion Test)	-	700	-
7.1.4(Tensile Test)	-	1300	-
7.1.5(Fusion Compatibility Test)	-	1600	25 % Discount for BIS
7.1.6(Corrected Density)	-	700	25 % Discount for BIS
7.1.7(Melt flow rate)	-	1100	25 % Discount for BIS
7.2.1(Leakage Test)	-	850	25 % Discount for BIS
7.2.2(Hydraulic Proof Test)	-	850	25 % Discount for BIS
7.2.3(Weldability Test)	-	1600	25 % Discount for BIS
7.3(Quick Couple Fitting)	-	500	25 % Discount for BIS
10(Marking)	-	500	25 % Discount for BIS
5.1.2(Squareness)	-	500	25 % Discount for BIS
Cl 6.3.5, Table 5 Dimension of Quick Coupled Sprinkler Saddles (Foot Batten)(Table 5 Dimension of Quick Coupled Sprinkler Saddles (Foot Batten))	-	1500	25 % Discount for BIS
4.1 (b)(HDPE couplers —)	-	1500	25 % Discount for BIS
5(Dimensions of pipe - i) Outside diameter)	-	0	-
5(Dimensions of pipe - ii) Wall thickness minimum)	-	0	-
6(Visual Appearance)	-	0	-
7.1(Hydraulic Characteristics - Quality test)	-	0	-
7.1(Hydraulic Characteristics - Acceptance test)	-	0	-
7.2(Reversion Test)	-	0	-
7.3(Tensile Test- i) Tensile Strength)	-	0	-
7.3(Tensile Test - ii)Elongation at Break)	-	0	-
7.4(Fusion Compatibility Test- a) Quality test)	-	0	-
7.4(Fusion Compatibility Test- b) Acceptance test)	-	0	-
7.5(Density)	-	0	-
7.6(Melt Flow Rate)	-	0	-
7.6(Melt Flow Rate)	-	0	-
4.2(Carbon black- a)carbon content)	-	0	-
4.2(Carbon black- b) Dispersion of carbon black)	-	0	-
7.6(Melt now Rate (MFR))	-	0	-
7.5(Density)	-	0	-
7.4 Table-2(Fusion Compatibility Test)	-	0	-
7.3(Tensile Test)	-	0	-
7.2(Reversion Test)	-	0	-
7.1 Table -2(Hydraulic Characteristics)	-	0	-
6.1(VISUAL APPEARANCE)	-	0	-
5.1.2(Ovality)	-	0	-
5.1 table -1(DIMENSIONS OF PIPES)	-	0	-
4.3(Anti-oxidant)	-	0	-
Cl. 4.2 , IS 2530-1963, Cl. 10(Cabon Black Content)	-	0	-
4.1.2(The MFR of the material shall be between 0.2 to 1.1 (both inclusive) when tested at 190 T at a nominal load of 50 N by the method prescribed in 7 of IS 2530. The MFR of the material shall also be within 20% of the value declared by the manufacturer.’)	-	0	-
4.1.1(density shall be between 940.4 kg/m’ and 958.4 kg/m3 (both inclusive) when determined at 27°C according to procedure prescribed in Annex A of IS 7328. The value of the density shall also not differ from the nominal value by more than 3 kg/m2 as per 5.2.1.1 of IS 7328.)	-	0	-
4.1(melt flow rating (MFR) shall not exceed 1.10 g/10 min.)	-	0	-
3(CLASSIFICATION OF PIPES)	-	0	-
4.1(Quick Coupled Male and Female Couplers)	-	0	-
4.1(Quick Coupled Male and Female Couplers)	-	0	-
4.1.3(Workmanship and appearance)	-	0	-
4.1.4(Holding attachments for coupler parts)	-	0	-
6.1.3(Weldability Test- a) Quality test)	-	0	-
6.1.3(Weldability Test- b) Acceptance test)	-	0	-
3(Quick Coupled pipes)	-	0	-
3(QUICK COUPLED PIPES)	-	0	-
4(QUICK COUPLED FITTINGS)	-	0	-
4.1 (a)(Quick Coupled Male and Female Couplers)	-	0	-
Cl. 4.1.1.2.1, IS 14151 (P-1)-1999, Cl. 4, IS 2530-1963, Cl. 10(Cabon Black Content)	-	0	-
Cl. 4.1.1.2.1, IS 14151 (P-1)-1999, Cl. 4, IS 2530-1963, Cl. 16(Carbon Black Dispersion)	-	0	-
4.1 .1.2.1(HDPE couplers)	-	0	-
4.1 .1.2.2(HDPE couplers)	-	0	-
4.1.4(a)(Holding Attachments for Coupler Parts)	-	0	-
4.1.4(b)(Holding Attachments for Coupler Parts)	-	0	-
4.2.1(Quick Coupled ~pe HDPE Fittings)	-	0	-
4.2.2(Quick Coupled ~pe HDPE Fittings)	-	0	-
4.2.3(Quick Coupled ~pe HDPE Fittings)	-	0	-
4.2.4(Quick Coupled ~pe HDPE Fittings)	-	0	-
4.2.5(Quick Coupled ~pe HDPE Fittings)	-	0	-
4.2.6(Quick Coupled ~pe HDPE Fittings)	-	0	-
4.2.7(Quick Coupled ~pe HDPE Fittings)	-	0	-
4.2.7(1 Dimensions of Quick Coupled Pipes and Fittings)	-	0	-
4.2.7(Reducers Table 1 and 2 of IS 8008 (Part 4))	-	0	-
4.2.7(Ferrule reducers Table 1 of IS 8008 (Part 5))	-	0	-
4.2.7(Pipe ends Table 1 of IS 8008 (Part 6))	-	0	-
4.2.7(End caps Table 1 of IS 8008 (Part 9))	-	0	-
4.2.7(Insert vatve couplers Table 1 of IS 8008 (Part 3))	-	0	-
4.2.7(Valve openers Table 1 of IS 8008 (Part 2))	-	0	-
5.2(Dimensions of Quick Coupled Sprinkler Saddles Table 1.)	-	0	-
6.1(Quick Coupled Pipes and Fittings)	-	0	-
6.1.1, 6.1.1.1(Leakage Test)	-	0	-
6.1.1, 6.1.1.1(Leakage Test)	-	0	-
6.1.2, 6.1.2.1(Hydraulic Proof Test)	-	0	-
6.1.2.2(Hydraulic Proof Test)	-	0	-
6.1.2.2(Hydraulic Proof Test)	-	0	-
6.1.3, 6.1.3.1(Weldability Test)	-	0	-
6.1.3.1.1(Weldability Test)	-	0	-
6.1.3.2(Quick coupled fittings)	-	0	-
6.2, 6.2.1(Quick Coupled Fittings)	-	0	-
7.2.1(Visual and Workmanship Requirement)	-	0	-
6.2 b(Material Identification - Male & Female Coupler)	-	0	-
6.3.3(Material Identification - Insert Valve Coupler)	-	0	-
6.3.3(Material Identification - Insert Valve Coupler)	-	0	-
6.3.4()	-	0	-
6.3.5(Material Identification - Saddle)	-	0	-
6.3.5(Material Identification - Pipe Ends)	-	0	-
6.3.6(Quick Coupled Pump Connectors - Visual)	-	0	-
4.2(Metallic Couplers)	-	0	-
4.2(Metallic Couplers)	-	0	-
7.2.1(Leakage Test)	-	0	-
Cl.4.1.3(Den sity Test)	-	0	-
Cl.4.1.3(MFR Test)	-	0	-
Cl.4.1.3(MFR Test)	-	0	-
Cl.4.1.3(MFR Test)	-	0	-
Cl.4.1.3(MFR Test)	-	0	-
Cl.4.1.3(Thermal Stabi lity)	-	0	-
Cl.4.1.3(Thermal Stabi lity)	-	0	-
Cl.4.1.3, T-1(Volatile Matter)	-	0	-
Cl.4.1.3, T-1(Volatile Matter)	-	0	-
Cl.4.1.3, T-1(Volatile Matter)	-	0	-
Cl.4.1.3, T-1(Volatile Matter)	-	0	-
Cl.4.1.3, T-1(Volatile Matter)	-	0	-
Cl.4.1.3, T-1(Volatile Matter)	-	0	-
Cl.4.1.3, T-1(Volatile Matter)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.4(Carbon Black Content)	-	0	-
Cl.4.1.4(Carbon Black Content)	-	0	-
Cl.4.1.4(Carbon Black Content)	-	0	-
Cl.4.1.4(Carbon Black Di spersion)	-	0	-
Cl.4.1.4(Carbon Black Di spersion)	-	0	-
Cl.4.1.4(Carbon Black Di spersion)	-	0	-
Cl.5(Di men sion)	-	0	-
Cl.5.1.l(Outside Diameter)	-	0	-
Cl.5.1.l(Outside Diameter)	-	0	-
Cl.6.2.L(Wall Thickness)	-	0	-
Cl.6.2.4(Workmanship and Appearance)	-	0	-
Cl.6.2.6(Rubber Ring Hardness)	-	0	-
Cl.6.2.6(Ageing Test)	-	0	-
Cl.7.1.l(Visual Anneara nce)	-	0	-
Cl.7.1.2(Hydraulic Characteristic)	-	0	-
Cl.7.1.2(Hydraulic Characteristic)	-	0	-
Cl.7.1.2(Hydraulic Characteristic)	-	0	-
Cl.7.1.2(Hydraulic Characteristic)	-	0	-
Cl.7.1.3(Reversion Test)	-	0	-
Cl.7.1.3(Reversion Test)	-	0	-
Cl.7.1.4(Tensile Test)	-	0	-
Cl.7.1.4(Tensile Test)	-	0	-
Cl.7.1.4(Tensile Test)	-	0	-
Cl.7.1.4(Elongation)	-	0	-
Cl.7.1.4(Elongation)	-	0	-
Cl.7.1.5(Fusion Compatibility)	-	0	-
Cl.7.1.5(Fusion Compatibility)	-	0	-
Cl.7.1.5(Fusion Compatibility)	-	0	-
Cl.7.1.5(Fusion Compatibility)	-	0	-
Cl.7.1.6(Corrected Density)	-	0	-
Cl.7.1.7(MFR Test)	-	0	-
Cl.7.1.7(MFR Test)	-	0	-
Cl.7.1.7(MFR Test)	-	0	-
Cl.7.1.7(MFR Test)	-	0	-
Cl.7.2.l(Leakage Test)	-	0	-
Cl.7.2.l(Leakage Test)	-	0	-
Cl.7.2.l(Leakage Test)	-	0	-
Cl.7.2.l(Leakage Test)	-	0	-
Cl.7.2.l(Leakage Test)	-	0	-
Cl.7.2.2(Cl.7.2.2)	-	0	-
Cl.7.2.3(Weld ability Test)	-	0	-
Cl.7.2.3(Weld ability Test)	-	0	-
6.2 (iii) Rubber Rings (a) Shore hardness(Shore hardness)	-	0	-
6.2 (iii) Rubber Rings (b) Accelerated Storage test(Accelerated Storage test)	-	0	-
5(Dimensions of pipe (outside diameter, ovality, wall thickness))	-	0	-
6.1(Thermal Stability (OIT))	-	0	-
6.1(Volatile Matter)	-	0	-
6.1(Water content)	-	0	-
6.1(Tensile strength at Yield & Elongation at break)	-	0	-
6.1(Carbon Black Content)	-	0	-
6.1(Carbon Black Dispersion)	-	0	-
6.2.1(Base Density x 2)	-	0	-
6.2.1(Melt Flow Index x 2)	-	0	-
6.2.1(Thermal Stability (OIT) x 2)	-	0	-
6.2.1(Volatile Matter x 2)	-	0	-
6.2.1(Water content x 2)	-	0	-
6.2.1(Carbon Black Content x 2)	-	0	-
6.2.1(Carbon Black Dispersion x 2)	-	0	-
6.2.1(Wall thickness of male & female coupler)	-	0	-
6.2.4(Workmanship and appearance (Visual))	-	0	-
6.2.5(Holding attachment for coupler parts)	-	0	-
6.2.5(Material Composition (Chemical Analysis))	-	0	-
4.2.2(Coating thickness (Hot dip Galvanized or Electroplated or Passivated or Powder Coated))	-	0	-
6.2.6(Material Identification (Chemical Analysis))	-	0	-
6.2.6(Color)	-	0	-
6.2.6(Rubber Ring Hardness Shore – A (Before Ageing))	-	0	-
6.2.6(Ageing Charges for rubber ring)	-	0	-
7.1.1(Visual appearance of pipes)	-	0	-
7.1.2(Hydraulic Characteristics)	-	0	-
7.1.2((a) Acceptance Test (48 hrs) / 80˚ C)	-	0	-
7.1.2((b) Type test ( 165 hrs) / 80˚ C)	-	0	-
7.1.3(Reversion)	-	0	-
7.1.4(Tensile strength & elongation)	-	0	-
7.1.5(Fusion Compatibility test)	-	0	-
7.1.5((a) Acceptance Test (48 hrs) / 80˚ C)	-	0	-
7.1.5((b) Type test ( 165 hrs) / 80˚ C)	-	0	-
7.1.6(Corrected Density)	-	0	-
7.1.6(Base Density)	-	0	-
7.1.6(Carbon black Content)	-	0	-
7.1.7(Melt Flow Rate (MFR))	-	0	-
7.2.1(Leakage test 1hour / 27°C)	-	0	-
7.2.2(Hydraulic Proof test 1hour / 27°C)	-	0	-
7.2.3((a) Acceptance Test (48 hrs) / 80˚ C)	-	0	-
7.2.3((b) Type test ( 165 hrs) / 80˚ C)	-	0	-
8(Supply of pipe (Visual))	-	0	-
4.1.1 (Table-1)(Density)	-	0	-
4.1.1 (Table-1)(Melt Flow Index)	-	0	-
4.1.1 (Table-1)(Oxidation Induction Time)	-	0	-
4.1.1 (Table-1)(Volatile Matter)	-	0	-
4.1.1 (Table-1)(Water content)	-	0	-
4.1.1 (Table-1)(Tensile strength at Yield & Elongation at break)	-	0	-
4.1.4(Carbon Black Content)	-	0	-
4.1.4(Carbon Black Dispersion)	-	0	-
4.1.1(Polyethylene material)	-	0	-
4.1.3, Table 1,(i)(Bass density)	-	0	-
4.1.3, Table 1,(ii)(Melt flow rate)	-	0	-
4.1.3, Table 1,(iii)(Thermal stability)	-	0	-
4.1.3, Table 1,(iv)(Volatile matter)	-	0	-
4.1.3, Table 1,(v)(Water content)	-	0	-
4.1.3, Table 1,(vi)(Minimum tensile strength at yield)	-	0	-
4.1.3, Table 1,(vii)(Minimum elongation at break)	-	0	-
4.1.4(The Carbon Content and Dispersion)	-	0	-
4.1.5(Carbon Black Specification)	-	0	-
4.1.6(Antioxidant)	-	0	-
4.1.7(Rework Material)	-	0	-
4.2(Metallic Couplers)	-	0	-
5.1, Table 1,(i)(Plain pipes)	-	0	-
5.1, Table 1,(ii)(90° Bends and tee)	-	0	-
5.1, Table 1,(iii)(Base pipe )	-	0	-
5.1, Table 1,(iv)(PCN)	-	0	-
5.1, Table 1,(v)(Reducers, ferrule reducers)	-	0	-
5.1, Table 1,(vi)(End caps, insert valve coupler, valve openers)	-	0	-
5.1, Table 1,(vii)(Riser pipe and socket)	-	0	-
7.1.1(Visual Appearance and Workmanship)	-	0	-
7.1.2(Hydraulic Performance Characteristic)	-	0	-
7.1.3(Reversion Test)	-	0	-
7.1.4(Tensile Test)	-	0	-
7.1.5(Fusion Compatibility Test)	-	0	-
7.1.6(Corrected Density)	-	0	-
7.1.7(Melt flow rate)	-	0	-
7.2.1(Leakage Test)	-	0	-
7.2.2(Hydraulic Proof Test)	-	0	-
7.2.3(Weldability Test)	-	0	-
7.3(Quick Couple Fitting)	-	0	-
10(Marking)	-	0	-
5.1.2(Squareness)	-	0	-
Cl 6.3.5, Table 5 Dimension of Quick Coupled Sprinkler Saddles (Foot Batten)(Table 5 Dimension of Quick Coupled Sprinkler Saddles (Foot Batten))	-	0	-
4.1 (b)(HDPE couplers —)	-	0	-
5(Dimensions of pipe - i) Outside diameter)	-	0	-
5(Dimensions of pipe - ii) Wall thickness minimum)	-	0	-
6(Visual Appearance)	-	0	-
7.1(Hydraulic Characteristics - Quality test)	-	0	-
7.1(Hydraulic Characteristics - Acceptance test)	-	0	-
7.2(Reversion Test)	-	0	-
7.3(Tensile Test- i) Tensile Strength)	-	0	-
7.3(Tensile Test - ii)Elongation at Break)	-	0	-
7.4(Fusion Compatibility Test- a) Quality test)	-	0	-
7.4(Fusion Compatibility Test- b) Acceptance test)	-	0	-
7.5(Density)	-	0	-
7.6(Melt Flow Rate)	-	0	-
7.6(Melt Flow Rate)	-	0	-
4.2(Carbon black- a)carbon content)	-	0	-
4.2(Carbon black- b) Dispersion of carbon black)	-	0	0
7.6(Melt now Rate (MFR))	-	0	0
7.5(Density)	-	0	-
7.4 Table-2(Fusion Compatibility Test)	-	0	-
7.3(Tensile Test)	-	0	-
7.2(Reversion Test)	-	0	-
7.1 Table -2(Hydraulic Characteristics)	-	0	-
6.1(VISUAL APPEARANCE)	-	0	-
5.1.2(Ovality)	-	0	-
5.1 table -1(DIMENSIONS OF PIPES)	-	0	-
4.3(Anti-oxidant)	-	0	-
Cl. 4.2 , IS 2530-1963, Cl. 10(Cabon Black Content)	-	0	-
4.1.2(The MFR of the material shall be between 0.2 to 1.1 (both inclusive) when tested at 190 T at a nominal load of 50 N by the method prescribed in 7 of IS 2530. The MFR of the material shall also be within 20% of the value declared by the manufacturer.’)	-	0	-
4.1.1(density shall be between 940.4 kg/m’ and 958.4 kg/m3 (both inclusive) when determined at 27°C according to procedure prescribed in Annex A of IS 7328. The value of the density shall also not differ from the nominal value by more than 3 kg/m2 as per 5.2.1.1 of IS 7328.)	-	0	-
4.1(melt flow rating (MFR) shall not exceed 1.10 g/10 min.)	-	0	-
3(CLASSIFICATION OF PIPES)	-	0	-
4.1(Quick Coupled Male and Female Couplers)	-	0	-
4.1(Quick Coupled Male and Female Couplers)	-	0	-
4.1.3(Workmanship and appearance)	-	0	-
4.1.4(Holding attachments for coupler parts)	-	0	-
6.1.3(Weldability Test- a) Quality test)	-	0	-
6.1.3(Weldability Test- b) Acceptance test)	-	0	-
3(Quick Coupled pipes)	-	0	-
3(QUICK COUPLED PIPES)	-	0	-
4(QUICK COUPLED FITTINGS)	-	0	-
4.1 (a)(Quick Coupled Male and Female Couplers)	-	0	-
Cl. 4.1.1.2.1, IS 14151 (P-1)-1999, Cl. 4, IS 2530-1963, Cl. 10(Cabon Black Content)	-	0	-
Cl. 4.1.1.2.1, IS 14151 (P-1)-1999, Cl. 4, IS 2530-1963, Cl. 16(Carbon Black Dispersion)	-	0	-
4.1 .1.2.1(HDPE couplers)	-	0	-
4.1 .1.2.2(HDPE couplers)	-	0	-
4.1.4(a)(Holding Attachments for Coupler Parts)	-	0	-
4.1.4(b)(Holding Attachments for Coupler Parts)	-	0	-
4.2.1(Quick Coupled ~pe HDPE Fittings)	-	0	-
4.2.2(Quick Coupled ~pe HDPE Fittings)	-	0	-
4.2.3(Quick Coupled ~pe HDPE Fittings)	-	0	-
4.2.4(Quick Coupled ~pe HDPE Fittings)	-	0	-
4.2.5(Quick Coupled ~pe HDPE Fittings)	-	0	-
4.2.6(Quick Coupled ~pe HDPE Fittings)	-	0	-
4.2.7(Quick Coupled ~pe HDPE Fittings)	-	0	-
4.2.7(1 Dimensions of Quick Coupled Pipes and Fittings)	-	0	-
4.2.7(Reducers Table 1 and 2 of IS 8008 (Part 4))	-	0	-
4.2.7(Ferrule reducers Table 1 of IS 8008 (Part 5))	-	0	-
4.2.7(Pipe ends Table 1 of IS 8008 (Part 6))	-	0	-
4.2.7(End caps Table 1 of IS 8008 (Part 9))	-	0	-
4.2.7(Insert vatve couplers Table 1 of IS 8008 (Part 3))	-	0	-
4.2.7(Valve openers Table 1 of IS 8008 (Part 2))	-	0	-
5.2(Dimensions of Quick Coupled Sprinkler Saddles Table 1.)	-	0	-
6.1(Quick Coupled Pipes and Fittings)	-	0	-
6.1.1, 6.1.1.1(Leakage Test)	-	0	-
6.1.1, 6.1.1.1(Leakage Test)	-	0	-
6.1.2, 6.1.2.1(Hydraulic Proof Test)	-	0	-
6.1.2.2(Hydraulic Proof Test)	-	0	-
6.1.2.2(Hydraulic Proof Test)	-	0	-
6.1.3, 6.1.3.1(Weldability Test)	-	0	-
6.1.3.1.1(Weldability Test)	-	0	-
6.1.3.2(Quick coupled fittings)	-	0	-
6.2, 6.2.1(Quick Coupled Fittings)	-	0	-
7.2.1(Visual and Workmanship Requirement)	-	0	-
6.2 b(Material Identification - Male & Female Coupler)	-	0	-
6.3.3(Material Identification - Insert Valve Coupler)	-	0	-
6.3.3(Material Identification - Insert Valve Coupler)	-	0	-
6.3.4()	-	0	-
6.3.5(Material Identification - Saddle)	-	0	-
6.3.5(Material Identification - Pipe Ends)	-	0	-
6.3.6(Quick Coupled Pump Connectors - Visual)	-	0	-
4.2(Metallic Couplers)	-	0	-
4.2(Metallic Couplers)	-	0	-
7.2.1(Leakage Test)	-	0	-
Cl.4.1.3(Den sity Test)	-	0	-
Cl.4.1.3(MFR Test)	-	0	-
Cl.4.1.3(MFR Test)	-	0	-
Cl.4.1.3(MFR Test)	-	0	-
Cl.4.1.3(MFR Test)	-	0	-
Cl.4.1.3(Thermal Stabi lity)	-	0	-
Cl.4.1.3(Thermal Stabi lity)	-	0	-
Cl.4.1.3, T-1(Volatile Matter)	-	0	-
Cl.4.1.3, T-1(Volatile Matter)	-	0	-
Cl.4.1.3, T-1(Volatile Matter)	-	0	-
Cl.4.1.3, T-1(Volatile Matter)	-	0	-
Cl.4.1.3, T-1(Volatile Matter)	-	0	-
Cl.4.1.3, T-1(Volatile Matter)	-	0	-
Cl.4.1.3, T-1(Volatile Matter)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.4(Carbon Black Content)	-	0	-
Cl.4.1.4(Carbon Black Content)	-	0	-
Cl.4.1.4(Carbon Black Content)	-	0	-
Cl.4.1.4(Carbon Black Di spersion)	-	0	-
Cl.4.1.4(Carbon Black Di spersion)	-	0	-
Cl.4.1.4(Carbon Black Di spersion)	-	0	-
Cl.5(Di men sion)	-	0	-
Cl.5.1.l(Outside Diameter)	-	0	-
Cl.5.1.l(Outside Diameter)	-	0	-
Cl.6.2.L(Wall Thickness)	-	0	-
Cl.6.2.4(Workmanship and Appearance)	-	0	-
Cl.6.2.6(Rubber Ring Hardness)	-	0	-
Cl.6.2.6(Ageing Test)	-	0	-
Cl.7.1.l(Visual Anneara nce)	-	0	-
Cl.7.1.2(Hydraulic Characteristic)	-	0	-
Cl.7.1.2(Hydraulic Characteristic)	-	0	-
Cl.7.1.2(Hydraulic Characteristic)	-	0	-
Cl.7.1.2(Hydraulic Characteristic)	-	0	-
Cl.7.1.3(Reversion Test)	-	0	-
Cl.7.1.3(Reversion Test)	-	0	-
Cl.7.1.4(Tensile Test)	-	0	-
Cl.7.1.4(Tensile Test)	-	0	-
Cl.7.1.4(Tensile Test)	-	0	-
Cl.7.1.4(Elongation)	-	0	-
Cl.7.1.4(Elongation)	-	0	-
Cl.7.1.5(Fusion Compatibility)	-	0	-
Cl.7.1.5(Fusion Compatibility)	-	0	-
Cl.7.1.5(Fusion Compatibility)	-	0	-
Cl.7.1.5(Fusion Compatibility)	-	0	-
Cl.7.1.6(Corrected Density)	-	0	-
Cl.7.1.7(MFR Test)	-	0	-
Cl.7.1.7(MFR Test)	-	0	-
Cl.7.1.7(MFR Test)	-	0	-
Cl.7.1.7(MFR Test)	-	0	-
Cl.7.2.l(Leakage Test)	-	0	-
Cl.7.2.l(Leakage Test)	-	0	-
Cl.7.2.l(Leakage Test)	-	0	-
Cl.7.2.l(Leakage Test)	-	0	-
Cl.7.2.l(Leakage Test)	-	0	-
Cl.7.2.2(Cl.7.2.2)	-	0	-
Cl.7.2.3(Weld ability Test)	-	0	-
Cl.7.2.3(Weld ability Test)	-	0	-
6.2 (iii) Rubber Rings (a) Shore hardness(Shore hardness)	-	0	-
6.2 (iii) Rubber Rings (b) Accelerated Storage test(Accelerated Storage test)	-	0	-
5(Dimensions of pipe (outside diameter, ovality, wall thickness))	-	0	-
6.1(Thermal Stability (OIT))	-	0	-
6.1(Volatile Matter)	-	0	-
6.1(Water content)	-	0	-
6.1(Tensile strength at Yield & Elongation at break)	-	0	-
6.1(Carbon Black Content)	-	0	-
6.1(Carbon Black Dispersion)	-	0	-
6.2.1(Base Density x 2)	-	0	-
6.2.1(Melt Flow Index x 2)	-	0	-
6.2.1(Thermal Stability (OIT) x 2)	-	0	-
6.2.1(Volatile Matter x 2)	-	0	-
6.2.1(Water content x 2)	-	0	-
6.2.1(Carbon Black Content x 2)	-	0	-
6.2.1(Carbon Black Dispersion x 2)	-	0	-
6.2.1(Wall thickness of male & female coupler)	-	0	-
6.2.4(Workmanship and appearance (Visual))	-	0	-
6.2.5(Holding attachment for coupler parts)	-	0	-
6.2.5(Material Composition (Chemical Analysis))	-	0	-
4.2.2(Coating thickness (Hot dip Galvanized or Electroplated or Passivated or Powder Coated))	-	0	-
6.2.6(Material Identification (Chemical Analysis))	-	0	-
6.2.6(Color)	-	0	-
6.2.6(Rubber Ring Hardness Shore – A (Before Ageing))	-	0	-
6.2.6(Ageing Charges for rubber ring)	-	0	-
7.1.1(Visual appearance of pipes)	-	0	-
7.1.2(Hydraulic Characteristics)	-	0	-
7.1.2((a) Acceptance Test (48 hrs) / 80˚ C)	-	0	-
7.1.2((b) Type test ( 165 hrs) / 80˚ C)	-	0	-
7.1.3(Reversion)	-	0	-
7.1.4(Tensile strength & elongation)	-	0	-
7.1.5(Fusion Compatibility test)	-	0	-
7.1.5((a) Acceptance Test (48 hrs) / 80˚ C)	-	0	-
7.1.5((b) Type test ( 165 hrs) / 80˚ C)	-	0	-
7.1.6(Corrected Density)	-	0	-
7.1.6(Base Density)	-	0	-
7.1.6(Carbon black Content)	-	0	-
7.1.7(Melt Flow Rate (MFR))	-	0	-
7.2.1(Leakage test 1hour / 27°C)	-	0	-
7.2.2(Hydraulic Proof test 1hour / 27°C)	-	0	-
7.2.3((a) Acceptance Test (48 hrs) / 80˚ C)	-	0	-
7.2.3((b) Type test ( 165 hrs) / 80˚ C)	-	0	-
8(Supply of pipe (Visual))	-	0	-
4.1.1 (Table-1)(Density)	-	0	-
4.1.1 (Table-1)(Melt Flow Index)	-	0	-
4.1.1 (Table-1)(Oxidation Induction Time)	-	0	-
4.1.1 (Table-1)(Volatile Matter)	-	0	-
4.1.1 (Table-1)(Water content)	-	0	-
4.1.1 (Table-1)(Tensile strength at Yield & Elongation at break)	-	0	-
4.1.4(Carbon Black Content)	-	0	-
4.1.4(Carbon Black Dispersion)	-	0	-
4.1.1(Polyethylene material)	-	0	-
4.1.3, Table 1,(i)(Bass density)	-	0	-
4.1.3, Table 1,(ii)(Melt flow rate)	-	0	-
4.1.3, Table 1,(iii)(Thermal stability)	-	0	-
4.1.3, Table 1,(iv)(Volatile matter)	-	0	-
4.1.3, Table 1,(v)(Water content)	-	0	-
4.1.3, Table 1,(vi)(Minimum tensile strength at yield)	-	0	-
4.1.3, Table 1,(vii)(Minimum elongation at break)	-	0	-
4.1.4(The Carbon Content and Dispersion)	-	0	-
4.1.5(Carbon Black Specification)	-	0	-
4.1.6(Antioxidant)	-	0	-
4.1.7(Rework Material)	-	0	-
4.2(Metallic Couplers)	-	0	-
5.1, Table 1,(i)(Plain pipes)	-	0	-
5.1, Table 1,(ii)(90° Bends and tee)	-	0	-
5.1, Table 1,(iii)(Base pipe )	-	0	-
5.1, Table 1,(iv)(PCN)	-	0	-
5.1, Table 1,(v)(Reducers, ferrule reducers)	-	0	-
5.1, Table 1,(vi)(End caps, insert valve coupler, valve openers)	-	0	-
5.1, Table 1,(vii)(Riser pipe and socket)	-	0	-
7.1.1(Visual Appearance and Workmanship)	-	0	-
7.1.2(Hydraulic Performance Characteristic)	-	0	-
7.1.3(Reversion Test)	-	0	-
7.1.4(Tensile Test)	-	0	-
7.1.5(Fusion Compatibility Test)	-	0	-
7.1.6(Corrected Density)	-	0	-
7.1.7(Melt flow rate)	-	0	-
7.2.1(Leakage Test)	-	0	-
7.2.2(Hydraulic Proof Test)	-	0	-
7.2.3(Weldability Test)	-	0	-
7.3(Quick Couple Fitting)	-	0	-
10(Marking)	-	0	-
5.1.2(Squareness)	-	0	-
Cl 6.3.5, Table 5 Dimension of Quick Coupled Sprinkler Saddles (Foot Batten)(Table 5 Dimension of Quick Coupled Sprinkler Saddles (Foot Batten))	-	0	-
4.1 (b)(HDPE couplers —)	-	0	-
5(Dimensions of pipe - i) Outside diameter)	-	0	-
5(Dimensions of pipe - ii) Wall thickness minimum)	-	0	-
6(Visual Appearance)	-	0	-
7.1(Hydraulic Characteristics - Quality test)	-	0	-
7.1(Hydraulic Characteristics - Acceptance test)	-	0	-
7.2(Reversion Test)	-	0	-
7.3(Tensile Test- i) Tensile Strength)	-	0	-
7.3(Tensile Test - ii)Elongation at Break)	-	0	-
7.4(Fusion Compatibility Test- a) Quality test)	-	0	-
7.4(Fusion Compatibility Test- b) Acceptance test)	-	0	-
7.5(Density)	-	0	-
7.6(Melt Flow Rate)	-	0	-
7.6(Melt Flow Rate)	-	0	-
4.2(Carbon black- a)carbon content)	-	0	-
4.2(Carbon black- b) Dispersion of carbon black)	-	0	-
7.6(Melt now Rate (MFR))	-	0	-
7.5(Density)	-	0	-
7.4 Table-2(Fusion Compatibility Test)	-	0	-
7.3(Tensile Test)	-	0	-
7.2(Reversion Test)	-	0	-
7.1 Table -2(Hydraulic Characteristics)	-	0	-
6.1(VISUAL APPEARANCE)	-	0	-
5.1.2(Ovality)	-	0	-
5.1 table -1(DIMENSIONS OF PIPES)	-	0	-
4.3(Anti-oxidant)	-	0	-
Cl. 4.2 , IS 2530-1963, Cl. 10(Cabon Black Content)	-	0	-
4.1.2(The MFR of the material shall be between 0.2 to 1.1 (both inclusive) when tested at 190 T at a nominal load of 50 N by the method prescribed in 7 of IS 2530. The MFR of the material shall also be within 20% of the value declared by the manufacturer.’)	-	0	-
4.1.1(density shall be between 940.4 kg/m’ and 958.4 kg/m3 (both inclusive) when determined at 27°C according to procedure prescribed in Annex A of IS 7328. The value of the density shall also not differ from the nominal value by more than 3 kg/m2 as per 5.2.1.1 of IS 7328.)	-	0	-
4.1(melt flow rating (MFR) shall not exceed 1.10 g/10 min.)	-	0	-
3(CLASSIFICATION OF PIPES)	-	0	-
4.1(Quick Coupled Male and Female Couplers)	-	0	-
4.1(Quick Coupled Male and Female Couplers)	-	0	-
4.1.3(Workmanship and appearance)	-	0	-
4.1.4(Holding attachments for coupler parts)	-	0	00
6.1.3(Weldability Test- a) Quality test)	-	0	-
6.1.3(Weldability Test- b) Acceptance test)	-	0	0
3(Quick Coupled pipes)	-	0	-
3(QUICK COUPLED PIPES)	-	0	-
4(QUICK COUPLED FITTINGS)	-	0	-
4.1 (a)(Quick Coupled Male and Female Couplers)	-	0	-
Cl. 4.1.1.2.1, IS 14151 (P-1)-1999, Cl. 4, IS 2530-1963, Cl. 10(Cabon Black Content)	-	0	-
Cl. 4.1.1.2.1, IS 14151 (P-1)-1999, Cl. 4, IS 2530-1963, Cl. 16(Carbon Black Dispersion)	-	0	-
4.1 .1.2.1(HDPE couplers)	-	0	-
4.1 .1.2.2(HDPE couplers)	-	0	-
4.1.4(a)(Holding Attachments for Coupler Parts)	-	0	-
4.1.4(b)(Holding Attachments for Coupler Parts)	-	0	-
4.2.1(Quick Coupled ~pe HDPE Fittings)	-	0	-
4.2.2(Quick Coupled ~pe HDPE Fittings)	-	0	-
4.2.3(Quick Coupled ~pe HDPE Fittings)	-	0	-
4.2.4(Quick Coupled ~pe HDPE Fittings)	-	0	-
4.2.5(Quick Coupled ~pe HDPE Fittings)	-	0	-
4.2.6(Quick Coupled ~pe HDPE Fittings)	-	0	-
4.2.7(Quick Coupled ~pe HDPE Fittings)	-	0	-
4.2.7(1 Dimensions of Quick Coupled Pipes and Fittings)	-	0	-
4.2.7(Reducers Table 1 and 2 of IS 8008 (Part 4))	-	0	-
4.2.7(Ferrule reducers Table 1 of IS 8008 (Part 5))	-	0	-
4.2.7(Pipe ends Table 1 of IS 8008 (Part 6))	-	0	-
4.2.7(End caps Table 1 of IS 8008 (Part 9))	-	0	-
4.2.7(Insert vatve couplers Table 1 of IS 8008 (Part 3))	-	0	-
4.2.7(Valve openers Table 1 of IS 8008 (Part 2))	-	0	-
5.2(Dimensions of Quick Coupled Sprinkler Saddles Table 1.)	-	0	-
6.1(Quick Coupled Pipes and Fittings)	-	0	-
6.1.1, 6.1.1.1(Leakage Test)	-	0	-
6.1.1, 6.1.1.1(Leakage Test)	-	0	-
6.1.2, 6.1.2.1(Hydraulic Proof Test)	-	0	-
6.1.2.2(Hydraulic Proof Test)	-	0	-
6.1.2.2(Hydraulic Proof Test)	-	0	-
6.1.3, 6.1.3.1(Weldability Test)	-	0	-
6.1.3.1.1(Weldability Test)	-	0	-
6.1.3.2(Quick coupled fittings)	-	0	-
6.2, 6.2.1(Quick Coupled Fittings)	-	0	-
7.2.1(Visual and Workmanship Requirement)	-	0	-
6.2 b(Material Identification - Male & Female Coupler)	-	0	-
6.3.3(Material Identification - Insert Valve Coupler)	-	0	-
6.3.3(Material Identification - Insert Valve Coupler)	-	0	-
6.3.4()	-	0	-
6.3.5(Material Identification - Saddle)	-	0	-
6.3.5(Material Identification - Pipe Ends)	-	0	-
6.3.6(Quick Coupled Pump Connectors - Visual)	-	0	-
4.2(Metallic Couplers)	-	0	-
4.2(Metallic Couplers)	-	0	-
7.2.1(Leakage Test)	-	0	-
Cl.4.1.3(Den sity Test)	-	0	-
Cl.4.1.3(MFR Test)	-	0	-
Cl.4.1.3(MFR Test)	-	0	-
Cl.4.1.3(MFR Test)	-	0	-
Cl.4.1.3(MFR Test)	-	0	-
Cl.4.1.3(Thermal Stabi lity)	-	0	-
Cl.4.1.3(Thermal Stabi lity)	-	0	-
Cl.4.1.3, T-1(Volatile Matter)	-	0	-
Cl.4.1.3, T-1(Volatile Matter)	-	0	-
Cl.4.1.3, T-1(Volatile Matter)	-	0	-
Cl.4.1.3, T-1(Volatile Matter)	-	0	-
Cl.4.1.3, T-1(Volatile Matter)	-	0	-
Cl.4.1.3, T-1(Volatile Matter)	-	0	-
Cl.4.1.3, T-1(Volatile Matter)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.4(Carbon Black Content)	-	0	-
Cl.4.1.4(Carbon Black Content)	-	0	-
Cl.4.1.4(Carbon Black Content)	-	0	-
Cl.4.1.4(Carbon Black Di spersion)	-	0	-
Cl.4.1.4(Carbon Black Di spersion)	-	0	-
Cl.4.1.4(Carbon Black Di spersion)	-	0	-
Cl.5(Di men sion)	-	0	-
Cl.5.1.l(Outside Diameter)	-	0	-
Cl.5.1.l(Outside Diameter)	-	0	-
Cl.6.2.L(Wall Thickness)	-	0	-
Cl.6.2.4(Workmanship and Appearance)	-	0	-
Cl.6.2.6(Rubber Ring Hardness)	-	0	-
Cl.6.2.6(Ageing Test)	-	0	-
Cl.7.1.l(Visual Anneara nce)	-	0	-
Cl.7.1.2(Hydraulic Characteristic)	-	0	-
Cl.7.1.2(Hydraulic Characteristic)	-	0	-
Cl.7.1.2(Hydraulic Characteristic)	-	0	-
Cl.7.1.2(Hydraulic Characteristic)	-	0	-
Cl.7.1.3(Reversion Test)	-	0	-
Cl.7.1.3(Reversion Test)	-	0	-
Cl.7.1.4(Tensile Test)	-	0	-
Cl.7.1.4(Tensile Test)	-	0	-
Cl.7.1.4(Tensile Test)	-	0	-
Cl.7.1.4(Elongation)	-	0	-
Cl.7.1.4(Elongation)	-	0	-
Cl.7.1.5(Fusion Compatibility)	-	0	-
Cl.7.1.5(Fusion Compatibility)	-	0	-
Cl.7.1.5(Fusion Compatibility)	-	0	-
Cl.7.1.5(Fusion Compatibility)	-	0	-
Cl.7.1.6(Corrected Density)	-	0	-
Cl.7.1.7(MFR Test)	-	0	-
Cl.7.1.7(MFR Test)	-	0	-
Cl.7.1.7(MFR Test)	-	0	-
Cl.7.1.7(MFR Test)	-	0	-
Cl.7.2.l(Leakage Test)	-	0	-
Cl.7.2.l(Leakage Test)	-	0	-
Cl.7.2.l(Leakage Test)	-	0	-
Cl.7.2.l(Leakage Test)	-	0	-
Cl.7.2.l(Leakage Test)	-	0	-
Cl.7.2.2(Cl.7.2.2)	-	0	-
Cl.7.2.3(Weld ability Test)	-	0	-
Cl.7.2.3(Weld ability Test)	-	0	-
6.2 (iii) Rubber Rings (a) Shore hardness(Shore hardness)	-	0	-
6.2 (iii) Rubber Rings (b) Accelerated Storage test(Accelerated Storage test)	-	0	-
5(Dimensions of pipe (outside diameter, ovality, wall thickness))	-	0	-
6.1(Thermal Stability (OIT))	-	0	-
6.1(Volatile Matter)	-	0	-
6.1(Water content)	-	0	-
6.1(Tensile strength at Yield & Elongation at break)	-	0	-
6.1(Carbon Black Content)	-	0	-
6.1(Carbon Black Dispersion)	-	0	-
6.2.1(Base Density x 2)	-	0	-
6.2.1(Melt Flow Index x 2)	-	0	-
6.2.1(Thermal Stability (OIT) x 2)	-	0	-
6.2.1(Volatile Matter x 2)	-	0	-
6.2.1(Water content x 2)	-	0	-
6.2.1(Carbon Black Content x 2)	-	0	-
6.2.1(Carbon Black Dispersion x 2)	-	0	-
6.2.1(Wall thickness of male & female coupler)	-	0	-
6.2.4(Workmanship and appearance (Visual))	-	0	-
6.2.5(Holding attachment for coupler parts)	-	0	-
6.2.5(Material Composition (Chemical Analysis))	-	0	-
4.2.2(Coating thickness (Hot dip Galvanized or Electroplated or Passivated or Powder Coated))	-	0	-
6.2.6(Material Identification (Chemical Analysis))	-	0	-
6.2.6(Color)	-	0	-
6.2.6(Rubber Ring Hardness Shore – A (Before Ageing))	-	0	-
6.2.6(Ageing Charges for rubber ring)	-	0	-
7.1.1(Visual appearance of pipes)	-	0	-
7.1.2(Hydraulic Characteristics)	-	0	-
7.1.2((a) Acceptance Test (48 hrs) / 80˚ C)	-	0	-
7.1.2((b) Type test ( 165 hrs) / 80˚ C)	-	0	-
7.1.3(Reversion)	-	0	-
7.1.4(Tensile strength & elongation)	-	0	-
7.1.5(Fusion Compatibility test)	-	0	-
7.1.5((a) Acceptance Test (48 hrs) / 80˚ C)	-	0	-
7.1.5((b) Type test ( 165 hrs) / 80˚ C)	-	0	-
7.1.6(Corrected Density)	-	0	-
7.1.6(Base Density)	-	0	-
7.1.6(Carbon black Content)	-	0	-
7.1.7(Melt Flow Rate (MFR))	-	0	-
7.2.1(Leakage test 1hour / 27°C)	-	0	-
7.2.2(Hydraulic Proof test 1hour / 27°C)	-	0	-
7.2.3((a) Acceptance Test (48 hrs) / 80˚ C)	-	0	-
7.2.3((b) Type test ( 165 hrs) / 80˚ C)	-	0	-
8(Supply of pipe (Visual))	-	0	-
4.1.1 (Table-1)(Density)	-	0	-
4.1.1 (Table-1)(Melt Flow Index)	-	0	-
4.1.1 (Table-1)(Oxidation Induction Time)	-	0	-
4.1.1 (Table-1)(Volatile Matter)	-	0	-
4.1.1 (Table-1)(Water content)	-	0	-
4.1.1 (Table-1)(Tensile strength at Yield & Elongation at break)	-	0	-
4.1.4(Carbon Black Content)	-	0	-
4.1.4(Carbon Black Dispersion)	-	0	-
4.1.1(Polyethylene material)	-	0	-
4.1.3, Table 1,(i)(Bass density)	-	0	-
4.1.3, Table 1,(ii)(Melt flow rate)	-	0	-
4.1.3, Table 1,(iii)(Thermal stability)	-	0	-
4.1.3, Table 1,(iv)(Volatile matter)	-	0	-
4.1.3, Table 1,(v)(Water content)	-	0	-
4.1.3, Table 1,(vi)(Minimum tensile strength at yield)	-	0	-
4.1.3, Table 1,(vii)(Minimum elongation at break)	-	0	-
4.1.4(The Carbon Content and Dispersion)	-	0	-
4.1.5(Carbon Black Specification)	-	0	-
4.1.6(Antioxidant)	-	0	-
4.1.7(Rework Material)	-	0	-
4.2(Metallic Couplers)	-	0	-
5.1, Table 1,(i)(Plain pipes)	-	0	-
5.1, Table 1,(ii)(90° Bends and tee)	-	0	-
5.1, Table 1,(iii)(Base pipe )	-	0	-
5.1, Table 1,(iv)(PCN)	-	0	-
5.1, Table 1,(v)(Reducers, ferrule reducers)	-	0	-
5.1, Table 1,(vi)(End caps, insert valve coupler, valve openers)	-	0	-
5.1, Table 1,(vii)(Riser pipe and socket)	-	0	-
7.1.1(Visual Appearance and Workmanship)	-	0	-
7.1.2(Hydraulic Performance Characteristic)	-	0	-
7.1.3(Reversion Test)	-	0	-
7.1.4(Tensile Test)	-	0	-
7.1.5(Fusion Compatibility Test)	-	0	-
7.1.6(Corrected Density)	-	0	-
7.1.7(Melt flow rate)	-	0	-
7.2.1(Leakage Test)	-	0	-
7.2.2(Hydraulic Proof Test)	-	0	-
7.2.3(Weldability Test)	-	0	-
7.3(Quick Couple Fitting)	-	0	-
10(Marking)	-	0	-
5.1.2(Squareness)	-	0	-
Cl 6.3.5, Table 5 Dimension of Quick Coupled Sprinkler Saddles (Foot Batten)(Table 5 Dimension of Quick Coupled Sprinkler Saddles (Foot Batten))	-	0	-
4.1 (b)(HDPE couplers —)	-	0	-
5(Dimensions of pipe - i) Outside diameter)	-	1500	-
5(Dimensions of pipe - ii) Wall thickness minimum)	-	500	-
6(Visual Appearance)	-	500	-
7.1(Hydraulic Characteristics - Quality test)	-	1300	-
7.1(Hydraulic Characteristics - Acceptance test)	-	1600	-
7.2(Reversion Test)	-	700	-
7.3(Tensile Test- i) Tensile Strength)	-	1300	-
7.3(Tensile Test - ii)Elongation at Break)	-	1300	-
7.4(Fusion Compatibility Test- a) Quality test)	-	1600	-
7.4(Fusion Compatibility Test- b) Acceptance test)	-	1600	-
7.5(Density)	-	700	-
7.6(Melt Flow Rate)	-	1100	-
7.6(Melt Flow Rate)	-	1100	-
4.2(Carbon black- a)carbon content)	-	950	-
4.2(Carbon black- b) Dispersion of carbon black)	-	800	-
7.6(Melt now Rate (MFR))	-	1100	-
7.5(Density)	-	700	-
7.4 Table-2(Fusion Compatibility Test)	-	1600	-
7.3(Tensile Test)	-	1300	-
7.2(Reversion Test)	-	700	-
7.1 Table -2(Hydraulic Characteristics)	-	1300	-
6.1(VISUAL APPEARANCE)	-	500	-
5.1.2(Ovality)	-	500	-
5.1 table -1(DIMENSIONS OF PIPES)	-	1500	-
4.3(Anti-oxidant)	-	2000	-
Cl. 4.2 , IS 2530-1963, Cl. 10(Cabon Black Content)	-	950	-
4.1.2(The MFR of the material shall be between 0.2 to 1.1 (both inclusive) when tested at 190 T at a nominal load of 50 N by the method prescribed in 7 of IS 2530. The MFR of the material shall also be within 20% of the value declared by the manufacturer.’)	-	1100	-
4.1.1(density shall be between 940.4 kg/m’ and 958.4 kg/m3 (both inclusive) when determined at 27°C according to procedure prescribed in Annex A of IS 7328. The value of the density shall also not differ from the nominal value by more than 3 kg/m2 as per 5.2.1.1 of IS 7328.)	-	700	-
4.1(melt flow rating (MFR) shall not exceed 1.10 g/10 min.)	-	1100	-
3(CLASSIFICATION OF PIPES)	-	500	-
4.1(Quick Coupled Male and Female Couplers)	-	500	-
4.1(Quick Coupled Male and Female Couplers)	-	500	-
4.1.3(Workmanship and appearance)	-	500	-
4.1.4(Holding attachments for coupler parts)	-	500	-
6.1.3(Weldability Test- a) Quality test)	-	1600	-
6.1.3(Weldability Test- b) Acceptance test)	-	1600	-
3(Quick Coupled pipes)	-	500	-
3(QUICK COUPLED PIPES)	-	500	-
4(QUICK COUPLED FITTINGS)	-	500	-
4.1 (a)(Quick Coupled Male and Female Couplers)	-	500	-
Cl. 4.1.1.2.1, IS 14151 (P-1)-1999, Cl. 4, IS 2530-1963, Cl. 10(Cabon Black Content)	-	500	-
Cl. 4.1.1.2.1, IS 14151 (P-1)-1999, Cl. 4, IS 2530-1963, Cl. 16(Carbon Black Dispersion)	-	500	-
4.1 .1.2.1(HDPE couplers)	-	500	-
4.1 .1.2.2(HDPE couplers)	-	500	-
4.1.4(a)(Holding Attachments for Coupler Parts)	-	500	-
4.1.4(b)(Holding Attachments for Coupler Parts)	-	500	-
4.2.1(Quick Coupled ~pe HDPE Fittings)	-	500	-
4.2.2(Quick Coupled ~pe HDPE Fittings)	-	500	-
4.2.3(Quick Coupled ~pe HDPE Fittings)	-	500	-
4.2.4(Quick Coupled ~pe HDPE Fittings)	-	500	-
4.2.5(Quick Coupled ~pe HDPE Fittings)	-	500	-
4.2.6(Quick Coupled ~pe HDPE Fittings)	-	500	-
4.2.7(Quick Coupled ~pe HDPE Fittings)	-	500	-
4.2.7(1 Dimensions of Quick Coupled Pipes and Fittings)	-	1500	-
4.2.7(Reducers Table 1 and 2 of IS 8008 (Part 4))	-	500	-
4.2.7(Ferrule reducers Table 1 of IS 8008 (Part 5))	-	500	-
4.2.7(Pipe ends Table 1 of IS 8008 (Part 6))	-	1500	-
4.2.7(End caps Table 1 of IS 8008 (Part 9))	-	1500	-
4.2.7(Insert vatve couplers Table 1 of IS 8008 (Part 3))	-	1500	-
4.2.7(Valve openers Table 1 of IS 8008 (Part 2))	-	500	-
5.2(Dimensions of Quick Coupled Sprinkler Saddles Table 1.)	-	1500	-
6.1(Quick Coupled Pipes and Fittings)	-	1500	-
6.1.1, 6.1.1.1(Leakage Test)	-	850	-
6.1.1, 6.1.1.1(Leakage Test)	-	850	-
6.1.2, 6.1.2.1(Hydraulic Proof Test)	-	850	-
6.1.2.2(Hydraulic Proof Test)	-	850	-
6.1.2.2(Hydraulic Proof Test)	-	850	-
6.1.3, 6.1.3.1(Weldability Test)	-	1600	-
6.1.3.1.1(Weldability Test)	-	1600	-
6.1.3.2(Quick coupled fittings)	-	500	-
6.2, 6.2.1(Quick Coupled Fittings)	-	500	-
7.2.1(Visual and Workmanship Requirement)	-	500	-
6.2 b(Material Identification - Male & Female Coupler)	-	1050	-
6.3.3(Material Identification - Insert Valve Coupler)	-	1050	-
6.3.3(Material Identification - Insert Valve Coupler)	-	1050	-
6.3.4()	-	0	-
6.3.5(Material Identification - Saddle)	-	1050	-
6.3.5(Material Identification - Pipe Ends)	-	1050	-
6.3.6(Quick Coupled Pump Connectors - Visual)	-	1050	-
4.2(Metallic Couplers)	-	500	-
4.2(Metallic Couplers)	-	500	-
7.2.1(Leakage Test)	-	850	-
Cl.4.1.3(Den sity Test)	-	700	-
Cl.4.1.3(MFR Test)	-	1100	-
Cl.4.1.3(MFR Test)	-	1100	-
Cl.4.1.3(MFR Test)	-	1100	-
Cl.4.1.3(MFR Test)	-	1100	-
Cl.4.1.3(Thermal Stabi lity)	-	2200	-
Cl.4.1.3(Thermal Stabi lity)	-	2200	-
Cl.4.1.3, T-1(Volatile Matter)	-	700	-
Cl.4.1.3, T-1(Volatile Matter)	-	700	-
Cl.4.1.3, T-1(Volatile Matter)	-	700	-
Cl.4.1.3, T-1(Volatile Matter)	-	700	-
Cl.4.1.3, T-1(Volatile Matter)	-	700	-
Cl.4.1.3, T-1(Volatile Matter)	-	700	-
Cl.4.1.3, T-1(Volatile Matter)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	7
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.3, T-1(Water Content)	-	700	-
Cl.4.1.4(Carbon Black Content)	-	925	-
Cl.4.1.4(Carbon Black Content)	-	925	-
Cl.4.1.4(Carbon Black Content)	-	925	-
Cl.4.1.4(Carbon Black Di spersion)	-	700	-
Cl.4.1.4(Carbon Black Di spersion)	-	700	-
Cl.4.1.4(Carbon Black Di spersion)	-	700	-
Cl.5(Di men sion)	-	1500	-
Cl.5.1.l(Outside Diameter)	-	500	-
Cl.5.1.l(Outside Diameter)	-	500	-
Cl.6.2.L(Wall Thickness)	-	500	-
Cl.6.2.4(Workmanship and Appearance)	-	500	-
Cl.6.2.6(Rubber Ring Hardness)	-	500	-
Cl.6.2.6(Ageing Test)	-	4200	-
Cl.7.1.l(Visual Anneara nce)	-	500	-
Cl.7.1.2(Hydraulic Characteristic)	-	1600	-
Cl.7.1.2(Hydraulic Characteristic)	-	1600	-
Cl.7.1.2(Hydraulic Characteristic)	-	1600	-
Cl.7.1.2(Hydraulic Characteristic)	-	1600	-
Cl.7.1.3(Reversion Test)	-	700	-
Cl.7.1.3(Reversion Test)	-	700	-
Cl.7.1.4(Tensile Test)	-	1300	-
Cl.7.1.4(Tensile Test)	-	1300	-
Cl.7.1.4(Tensile Test)	-	1300	-
Cl.7.1.4(Elongation)	-	1300	-
Cl.7.1.4(Elongation)	-	1300	-
Cl.7.1.5(Fusion Compatibility)	-	1600	-
Cl.7.1.5(Fusion Compatibility)	-	1600	-
Cl.7.1.5(Fusion Compatibility)	-	1600	-
Cl.7.1.5(Fusion Compatibility)	-	1600	-
Cl.7.1.6(Corrected Density)	-	700	-
Cl.7.1.7(MFR Test)	-	1100	-
Cl.7.1.7(MFR Test)	-	1100	-
Cl.7.1.7(MFR Test)	-	1100	-
Cl.7.1.7(MFR Test)	-	1100	-
Cl.7.2.l(Leakage Test)	-	850	-
Cl.7.2.l(Leakage Test)	-	850	-
Cl.7.2.l(Leakage Test)	-	850	-
Cl.7.2.l(Leakage Test)	-	850	-
Cl.7.2.l(Leakage Test)	-	850	-
Cl.7.2.2(Cl.7.2.2)	-	850	-
Cl.7.2.3(Weld ability Test)	-	1600	-
Cl.7.2.3(Weld ability Test)	-	1600	-
6.2 (iii) Rubber Rings (a) Shore hardness(Shore hardness)	-	500	-
6.2 (iii) Rubber Rings (b) Accelerated Storage test(Accelerated Storage test)	-	4200	-
5(Dimensions of pipe (outside diameter, ovality, wall thickness))	-	1500	-
6.1(Thermal Stability (OIT))	-	2200	-
6.1(Volatile Matter)	-	700	-
6.1(Water content)	-	700	-
6.1(Tensile strength at Yield & Elongation at break)	-	1300	-
6.1(Carbon Black Content)	-	925	-
6.1(Carbon Black Dispersion)	-	700	-
6.2.1(Base Density x 2)	-	1400	-
6.2.1(Melt Flow Index x 2)	-	2200	-
6.2.1(Thermal Stability (OIT) x 2)	-	4400	-
6.2.1(Volatile Matter x 2)	-	1400	-
6.2.1(Water content x 2)	-	1400	-
6.2.1(Carbon Black Content x 2)	-	1850	-
6.2.1(Carbon Black Dispersion x 2)	-	1400	-
6.2.1(Wall thickness of male & female coupler)	-	500	-
6.2.4(Workmanship and appearance (Visual))	-	500	-
6.2.5(Holding attachment for coupler parts)	-	500	-
6.2.5(Material Composition (Chemical Analysis))	-	1050	-
4.2.2(Coating thickness (Hot dip Galvanized or Electroplated or Passivated or Powder Coated))	-	500	-
6.2.6(Material Identification (Chemical Analysis))	-	1050	-
6.2.6(Color)	-	500	-
6.2.6(Rubber Ring Hardness Shore – A (Before Ageing))	-	500	-
6.2.6(Ageing Charges for rubber ring)	-	4200	-
7.1.1(Visual appearance of pipes)	-	500	-
7.1.2(Hydraulic Characteristics)	-	1600	-
7.1.2((a) Acceptance Test (48 hrs) / 80˚ C)	-	1600	-
7.1.2((b) Type test ( 165 hrs) / 80˚ C)	-	4800	-
7.1.3(Reversion)	-	700	-
7.1.4(Tensile strength & elongation)	-	1300	-
7.1.5(Fusion Compatibility test)	-	1600	-
7.1.5((a) Acceptance Test (48 hrs) / 80˚ C)	-	1600	-
7.1.5((b) Type test ( 165 hrs) / 80˚ C)	-	4800	-
7.1.6(Corrected Density)	-	700	-
7.1.6(Base Density)	-	700	-
7.1.6(Carbon black Content)	-	925	-
7.1.7(Melt Flow Rate (MFR))	-	1100	-
7.2.1(Leakage test 1hour / 27°C)	-	850	-
7.2.2(Hydraulic Proof test 1hour / 27°C)	-	850	-
7.2.3((a) Acceptance Test (48 hrs) / 80˚ C)	-	1600	-
7.2.3((b) Type test ( 165 hrs) / 80˚ C)	-	4800	-
8(Supply of pipe (Visual))	-	500	-
4.1.1 (Table-1)(Density)	-	700	-
4.1.1 (Table-1)(Melt Flow Index)	-	1100	-
4.1.1 (Table-1)(Oxidation Induction Time)	-	2200	-
4.1.1 (Table-1)(Volatile Matter)	-	700	-
4.1.1 (Table-1)(Water content)	-	700	-
4.1.1 (Table-1)(Tensile strength at Yield & Elongation at break)	-	1300	-
4.1.4(Carbon Black Content)	-	925	-
4.1.4(Carbon Black Dispersion)	-	700	-
4.1.1(Polyethylene material)	-	1050	-
4.1.3, Table 1,(i)(Bass density)	-	700	-
4.1.3, Table 1,(ii)(Melt flow rate)	-	1300	-
4.1.3, Table 1,(iii)(Thermal stability)	-	2200	-
4.1.3, Table 1,(iv)(Volatile matter)	-	700	-
4.1.3, Table 1,(v)(Water content)	-	700	-
4.1.3, Table 1,(vi)(Minimum tensile strength at yield)	-	1300	-
4.1.3, Table 1,(vii)(Minimum elongation at break)	-	1300	-
4.1.4(The Carbon Content and Dispersion)	-	900	-
4.1.5(Carbon Black Specification)	-	850	-
4.1.6(Antioxidant)	-	2000	-
4.1.7(Rework Material)	-	500	-
4.2(Metallic Couplers)	-	500	-
5.1, Table 1,(i)(Plain pipes)	-	500	-
5.1, Table 1,(ii)(90° Bends and tee)	-	500	-
5.1, Table 1,(iii)(Base pipe )	-	500	-
5.1, Table 1,(iv)(PCN)	-	0	-
5.1, Table 1,(v)(Reducers, ferrule reducers)	-	500	-
5.1, Table 1,(vi)(End caps, insert valve coupler, valve openers)	-	500	-
5.1, Table 1,(vii)(Riser pipe and socket)	-	500	-
7.1.1(Visual Appearance and Workmanship)	-	500	-
7.1.2(Hydraulic Performance Characteristic)	-	1600	-
7.1.3(Reversion Test)	-	700	-
7.1.4(Tensile Test)	-	1300	-
7.1.5(Fusion Compatibility Test)	-	1600	-
7.1.6(Corrected Density)	-	700	-
7.1.7(Melt flow rate)	-	1100	-
7.2.1(Leakage Test)	-	850	-
7.2.2(Hydraulic Proof Test)	-	1600	-
7.2.3(Weldability Test)	-	500	-
7.3(Quick Couple Fitting)	-	500	-
10(Marking)	-	500	-
5.1.2(Squareness)	-	500	-
Cl 6.3.5, Table 5 Dimension of Quick Coupled Sprinkler Saddles (Foot Batten)(Table 5 Dimension of Quick Coupled Sprinkler Saddles (Foot Batten))	-	500	-
4.1 (b)(HDPE couplers —)	-	1500	-
5(Dimensions of pipe - i) Outside diameter)	-	0	-
5(Dimensions of pipe - ii) Wall thickness minimum)	-	500	-
6(Visual Appearance)	-	0	-
7.1(Hydraulic Characteristics - Quality test)	-	0	-
7.1(Hydraulic Characteristics - Acceptance test)	-	0	-
7.2(Reversion Test)	-	0	-
7.3(Tensile Test- i) Tensile Strength)	-	0	-
7.3(Tensile Test - ii)Elongation at Break)	-	0	-
7.4(Fusion Compatibility Test- a) Quality test)	-	0	-
7.4(Fusion Compatibility Test- b) Acceptance test)	-	0	-
7.5(Density)	-	0	-
7.6(Melt Flow Rate)	-	0	-
7.6(Melt Flow Rate)	-	0	-
4.2(Carbon black- a)carbon content)	-	0	-
4.2(Carbon black- b) Dispersion of carbon black)	-	0	-
7.6(Melt now Rate (MFR))	-	0	-
7.5(Density)	-	0	-
7.4 Table-2(Fusion Compatibility Test)	-	0	-
7.3(Tensile Test)	-	0	-
7.2(Reversion Test)	-	0	-
7.1 Table -2(Hydraulic Characteristics)	-	0	-
6.1(VISUAL APPEARANCE)	-	0	-
5.1.2(Ovality)	-	0	-
5.1 table -1(DIMENSIONS OF PIPES)	-	0	-
4.3(Anti-oxidant)	-	0	-
Cl. 4.2 , IS 2530-1963, Cl. 10(Cabon Black Content)	-	0	-
4.1.2(The MFR of the material shall be between 0.2 to 1.1 (both inclusive) when tested at 190 T at a nominal load of 50 N by the method prescribed in 7 of IS 2530. The MFR of the material shall also be within 20% of the value declared by the manufacturer.’)	-	0	-
4.1.1(density shall be between 940.4 kg/m’ and 958.4 kg/m3 (both inclusive) when determined at 27°C according to procedure prescribed in Annex A of IS 7328. The value of the density shall also not differ from the nominal value by more than 3 kg/m2 as per 5.2.1.1 of IS 7328.)	-	0	-
4.1(melt flow rating (MFR) shall not exceed 1.10 g/10 min.)	-	0	-
3(CLASSIFICATION OF PIPES)	-	0	-
4.1(Quick Coupled Male and Female Couplers)	-	0	-
4.1(Quick Coupled Male and Female Couplers)	-	0	-
4.1.3(Workmanship and appearance)	-	0	-
4.1.4(Holding attachments for coupler parts)	-	0	-
6.1.3(Weldability Test- a) Quality test)	-	0	-
6.1.3(Weldability Test- b) Acceptance test)	-	0	-
3(Quick Coupled pipes)	-	0	-
3(QUICK COUPLED PIPES)	-	0	-
4(QUICK COUPLED FITTINGS)	-	0	-
4.1 (a)(Quick Coupled Male and Female Couplers)	-	0	-
Cl. 4.1.1.2.1, IS 14151 (P-1)-1999, Cl. 4, IS 2530-1963, Cl. 10(Cabon Black Content)	-	0	-
Cl. 4.1.1.2.1, IS 14151 (P-1)-1999, Cl. 4, IS 2530-1963, Cl. 16(Carbon Black Dispersion)	-	0	-
4.1 .1.2.1(HDPE couplers)	-	0	-
4.1 .1.2.2(HDPE couplers)	-	0	-
4.1.4(a)(Holding Attachments for Coupler Parts)	-	0	-
4.1.4(b)(Holding Attachments for Coupler Parts)	-	0	-
4.2.1(Quick Coupled ~pe HDPE Fittings)	-	0	-
4.2.2(Quick Coupled ~pe HDPE Fittings)	-	0	-
4.2.3(Quick Coupled ~pe HDPE Fittings)	-	0	-
4.2.4(Quick Coupled ~pe HDPE Fittings)	-	0	-
4.2.5(Quick Coupled ~pe HDPE Fittings)	-	0	-
4.2.6(Quick Coupled ~pe HDPE Fittings)	-	0	-
4.2.7(Quick Coupled ~pe HDPE Fittings)	-	0	-
4.2.7(1 Dimensions of Quick Coupled Pipes and Fittings)	-	0	-
4.2.7(Reducers Table 1 and 2 of IS 8008 (Part 4))	-	0	-
4.2.7(Ferrule reducers Table 1 of IS 8008 (Part 5))	-	0	-
4.2.7(Pipe ends Table 1 of IS 8008 (Part 6))	-	0	-
4.2.7(End caps Table 1 of IS 8008 (Part 9))	-	0	-
4.2.7(Insert vatve couplers Table 1 of IS 8008 (Part 3))	-	0	-
4.2.7(Valve openers Table 1 of IS 8008 (Part 2))	-	0	-
5.2(Dimensions of Quick Coupled Sprinkler Saddles Table 1.)	-	0	-
6.1(Quick Coupled Pipes and Fittings)	-	0	-
6.1.1, 6.1.1.1(Leakage Test)	-	0	-
6.1.1, 6.1.1.1(Leakage Test)	-	0	-
6.1.2, 6.1.2.1(Hydraulic Proof Test)	-	0	-
6.1.2.2(Hydraulic Proof Test)	-	0	-
6.1.2.2(Hydraulic Proof Test)	-	0	-
6.1.3, 6.1.3.1(Weldability Test)	-	0	-
6.1.3.1.1(Weldability Test)	-	0	-
6.1.3.2(Quick coupled fittings)	-	0	-
6.2, 6.2.1(Quick Coupled Fittings)	-	0	-
7.2.1(Visual and Workmanship Requirement)	-	0	-
6.2 b(Material Identification - Male & Female Coupler)	-	0	-
6.3.3(Material Identification - Insert Valve Coupler)	-	0	-
6.3.3(Material Identification - Insert Valve Coupler)	-	0	-
6.3.4()	-	0	-
6.3.5(Material Identification - Saddle)	-	0	-
6.3.5(Material Identification - Pipe Ends)	-	0	-
6.3.6(Quick Coupled Pump Connectors - Visual)	-	0	-
4.2(Metallic Couplers)	-	0	-
4.2(Metallic Couplers)	-	0	-
7.2.1(Leakage Test)	-	0	-
Cl.4.1.3(Den sity Test)	-	0	-
Cl.4.1.3(MFR Test)	-	0	-
Cl.4.1.3(MFR Test)	-	0	-
Cl.4.1.3(MFR Test)	-	0	-
Cl.4.1.3(MFR Test)	-	0	-
Cl.4.1.3(Thermal Stabi lity)	-	0	-
Cl.4.1.3(Thermal Stabi lity)	-	0	-
Cl.4.1.3, T-1(Volatile Matter)	-	0	-
Cl.4.1.3, T-1(Volatile Matter)	-	0	-
Cl.4.1.3, T-1(Volatile Matter)	-	0	-
Cl.4.1.3, T-1(Volatile Matter)	-	0	-
Cl.4.1.3, T-1(Volatile Matter)	-	0	-
Cl.4.1.3, T-1(Volatile Matter)	-	0	-
Cl.4.1.3, T-1(Volatile Matter)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.3, T-1(Water Content)	-	0	-
Cl.4.1.4(Carbon Black Content)	-	0	-
Cl.4.1.4(Carbon Black Content)	-	0	-
Cl.4.1.4(Carbon Black Content)	-	0	-
Cl.4.1.4(Carbon Black Di spersion)	-	0	-
Cl.4.1.4(Carbon Black Di spersion)	-	0	-
Cl.4.1.4(Carbon Black Di spersion)	-	0	-
Cl.5(Di men sion)	-	0	-
Cl.5.1.l(Outside Diameter)	-	0	-
Cl.5.1.l(Outside Diameter)	-	0	-
Cl.6.2.L(Wall Thickness)	-	0	-
Cl.6.2.4(Workmanship and Appearance)	-	0	-
Cl.6.2.6(Rubber Ring Hardness)	-	0	-
Cl.6.2.6(Ageing Test)	-	0	-
Cl.7.1.l(Visual Anneara nce)	-	0	-
Cl.7.1.2(Hydraulic Characteristic)	-	0	-
Cl.7.1.2(Hydraulic Characteristic)	-	0	-
Cl.7.1.2(Hydraulic Characteristic)	-	0	-
Cl.7.1.2(Hydraulic Characteristic)	-	0	-
Cl.7.1.3(Reversion Test)	-	0	-
Cl.7.1.3(Reversion Test)	-	0	-
Cl.7.1.4(Tensile Test)	-	0	-
Cl.7.1.4(Tensile Test)	-	0	-
Cl.7.1.4(Tensile Test)	-	0	-
Cl.7.1.4(Elongation)	-	0	-
Cl.7.1.4(Elongation)	-	0	-
Cl.7.1.5(Fusion Compatibility)	-	0	-
Cl.7.1.5(Fusion Compatibility)	-	0	-
Cl.7.1.5(Fusion Compatibility)	-	0	-
Cl.7.1.5(Fusion Compatibility)	-	0	-
Cl.7.1.6(Corrected Density)	-	0	-
Cl.7.1.7(MFR Test)	-	0	-
Cl.7.1.7(MFR Test)	-	0	-
Cl.7.1.7(MFR Test)	-	0	-
Cl.7.1.7(MFR Test)	-	0	-
Cl.7.2.l(Leakage Test)	-	0	-
Cl.7.2.l(Leakage Test)	-	0	-
Cl.7.2.l(Leakage Test)	-	0	-
Cl.7.2.l(Leakage Test)	-	0	-
Cl.7.2.l(Leakage Test)	-	0	-
Cl.7.2.2(Cl.7.2.2)	-	0	-
Cl.7.2.3(Weld ability Test)	-	0	-
Cl.7.2.3(Weld ability Test)	-	0	-
6.2 (iii) Rubber Rings (a) Shore hardness(Shore hardness)	-	0	-
6.2 (iii) Rubber Rings (b) Accelerated Storage test(Accelerated Storage test)	-	0	-
5(Dimensions of pipe (outside diameter, ovality, wall thickness))	-	0	-
6.1(Thermal Stability (OIT))	-	0	-
6.1(Volatile Matter)	-	0	-
6.1(Water content)	-	0	-
6.1(Tensile strength at Yield & Elongation at break)	-	0	-
6.1(Carbon Black Content)	-	0	-
6.1(Carbon Black Dispersion)	-	0	-
6.2.1(Base Density x 2)	-	0	-
6.2.1(Melt Flow Index x 2)	-	0	-
6.2.1(Thermal Stability (OIT) x 2)	-	0	-
6.2.1(Volatile Matter x 2)	-	0	-
6.2.1(Water content x 2)	-	0	-
6.2.1(Carbon Black Content x 2)	-	0	-
6.2.1(Carbon Black Dispersion x 2)	-	0	-
6.2.1(Wall thickness of male & female coupler)	-	0	-
6.2.4(Workmanship and appearance (Visual))	-	0	-
6.2.5(Holding attachment for coupler parts)	-	0	-
6.2.5(Material Composition (Chemical Analysis))	-	0	-
4.2.2(Coating thickness (Hot dip Galvanized or Electroplated or Passivated or Powder Coated))	-	0	-
6.2.6(Material Identification (Chemical Analysis))	-	0	-
6.2.6(Color)	-	0	-
6.2.6(Rubber Ring Hardness Shore – A (Before Ageing))	-	0	-
6.2.6(Ageing Charges for rubber ring)	-	0	-
7.1.1(Visual appearance of pipes)	-	0	-
7.1.2(Hydraulic Characteristics)	-	0	-
7.1.2((a) Acceptance Test (48 hrs) / 80˚ C)	-	0	-
7.1.2((b) Type test ( 165 hrs) / 80˚ C)	-	0	-
7.1.3(Reversion)	-	0	-
7.1.4(Tensile strength & elongation)	-	0	-
7.1.5(Fusion Compatibility test)	-	0	-
7.1.5((a) Acceptance Test (48 hrs) / 80˚ C)	-	0	-
7.1.5((b) Type test ( 165 hrs) / 80˚ C)	-	0	-
7.1.6(Corrected Density)	-	0	-
7.1.6(Base Density)	-	0	-
7.1.6(Carbon black Content)	-	0	-
7.1.7(Melt Flow Rate (MFR))	-	0	-
7.2.1(Leakage test 1hour / 27°C)	-	0	-
7.2.2(Hydraulic Proof test 1hour / 27°C)	-	0	-
7.2.3((a) Acceptance Test (48 hrs) / 80˚ C)	-	0	-
7.2.3((b) Type test ( 165 hrs) / 80˚ C)	-	0	-
8(Supply of pipe (Visual))	-	0	-
4.1.1 (Table-1)(Density)	-	0	-
4.1.1 (Table-1)(Melt Flow Index)	-	0	-
4.1.1 (Table-1)(Oxidation Induction Time)	-	0	-
4.1.1 (Table-1)(Volatile Matter)	-	0	-
4.1.1 (Table-1)(Water content)	-	0	-
4.1.1 (Table-1)(Tensile strength at Yield & Elongation at break)	-	0	-
4.1.4(Carbon Black Content)	-	0	-
4.1.4(Carbon Black Dispersion)	-	0	-
4.1.1(Polyethylene material)	-	0	-
4.1.3, Table 1,(i)(Bass density)	-	0	-
4.1.3, Table 1,(ii)(Melt flow rate)	-	0	-
4.1.3, Table 1,(iii)(Thermal stability)	-	0	-
4.1.3, Table 1,(iv)(Volatile matter)	-	0	-
4.1.3, Table 1,(v)(Water content)	-	0	-
4.1.3, Table 1,(vi)(Minimum tensile strength at yield)	-	0	-
4.1.3, Table 1,(vii)(Minimum elongation at break)	-	0	-
4.1.4(The Carbon Content and Dispersion)	-	0	-
4.1.5(Carbon Black Specification)	-	0	-
4.1.6(Antioxidant)	-	0	-
4.1.7(Rework Material)	-	0	-
4.2(Metallic Couplers)	-	0	-
5.1, Table 1,(i)(Plain pipes)	-	0	-
5.1, Table 1,(ii)(90° Bends and tee)	-	0	-
5.1, Table 1,(iii)(Base pipe )	-	0	-
5.1, Table 1,(iv)(PCN)	-	0	-
5.1, Table 1,(v)(Reducers, ferrule reducers)	-	0	-
5.1, Table 1,(vi)(End caps, insert valve coupler, valve openers)	-	0	-
5.1, Table 1,(vii)(Riser pipe and socket)	-	0	-
7.1.1(Visual Appearance and Workmanship)	-	0	-
7.1.2(Hydraulic Performance Characteristic)	-	0	-
7.1.3(Reversion Test)	-	0	-
7.1.4(Tensile Test)	-	0	-
7.1.5(Fusion Compatibility Test)	-	0	-
7.1.6(Corrected Density)	-	0	-
7.1.7(Melt flow rate)	-	0	-
7.2.1(Leakage Test)	-	0	-
7.2.2(Hydraulic Proof Test)	-	0	-
7.2.3(Weldability Test)	-	0	-
7.3(Quick Couple Fitting)	-	0	-
10(Marking)	-	0	-
5.1.2(Squareness)	-	0	-
Cl 6.3.5, Table 5 Dimension of Quick Coupled Sprinkler Saddles (Foot Batten)(Table 5 Dimension of Quick Coupled Sprinkler Saddles (Foot Batten))	-	0	-
4.1 (b)(HDPE couplers —)	-	0	-
5(Dimensions of pipe - i) Outside diameter)	-	-	-
5(Dimensions of pipe - ii) Wall thickness minimum)	-	-	-
6(Visual Appearance)	-	-	-
7.1(Hydraulic Characteristics - Quality test)	-	-	-
7.1(Hydraulic Characteristics - Acceptance test)	-	-	-
7.2(Reversion Test)	-	-	-
7.3(Tensile Test- i) Tensile Strength)	-	-	-
7.3(Tensile Test - ii)Elongation at Break)	-	-	-
7.4(Fusion Compatibility Test- a) Quality test)	-	-	-
7.4(Fusion Compatibility Test- b) Acceptance test)	-	-	-
7.5(Density)	-	-	-
7.6(Melt Flow Rate)	-	-	-
7.6(Melt Flow Rate)	-	-	-
4.2(Carbon black- a)carbon content)	-	-	-
4.2(Carbon black- b) Dispersion of carbon black)	-	-	-
7.6(Melt now Rate (MFR))	-	-	-
7.5(Density)	-	-	-
7.4 Table-2(Fusion Compatibility Test)	-	-	-
7.3(Tensile Test)	-	-	-
7.2(Reversion Test)	-	-	-
7.1 Table -2(Hydraulic Characteristics)	-	-	-
6.1(VISUAL APPEARANCE)	-	-	-
5.1.2(Ovality)	-	-	-
5.1 table -1(DIMENSIONS OF PIPES)	-	-	-
4.3(Anti-oxidant)	-	-	-
Cl. 4.2 , IS 2530-1963, Cl. 10(Cabon Black Content)	-	-	-
4.1.2(The MFR of the material shall be between 0.2 to 1.1 (both inclusive) when tested at 190 T at a nominal load of 50 N by the method prescribed in 7 of IS 2530. The MFR of the material shall also be within 20% of the value declared by the manufacturer.’)	-	-	-
4.1.1(density shall be between 940.4 kg/m’ and 958.4 kg/m3 (both inclusive) when determined at 27°C according to procedure prescribed in Annex A of IS 7328. The value of the density shall also not differ from the nominal value by more than 3 kg/m2 as per 5.2.1.1 of IS 7328.)	-	-	-
4.1(melt flow rating (MFR) shall not exceed 1.10 g/10 min.)	-	-	-
3(CLASSIFICATION OF PIPES)	-	-	-
4.1(Quick Coupled Male and Female Couplers)	-	-	-
4.1(Quick Coupled Male and Female Couplers)	-	-	-
4.1.3(Workmanship and appearance)	-	-	-
4.1.4(Holding attachments for coupler parts)	-	-	-
6.1.3(Weldability Test- a) Quality test)	-	-	-
6.1.3(Weldability Test- b) Acceptance test)	-	-	-
3(Quick Coupled pipes)	-	-	-
3(QUICK COUPLED PIPES)	-	-	-
4(QUICK COUPLED FITTINGS)	-	-	-
4.1 (a)(Quick Coupled Male and Female Couplers)	-	-	-
Cl. 4.1.1.2.1, IS 14151 (P-1)-1999, Cl. 4, IS 2530-1963, Cl. 10(Cabon Black Content)	-	-	-
Cl. 4.1.1.2.1, IS 14151 (P-1)-1999, Cl. 4, IS 2530-1963, Cl. 16(Carbon Black Dispersion)	-	-	-
4.1 .1.2.1(HDPE couplers)	-	-	-
4.1 .1.2.2(HDPE couplers)	-	-	-
4.1.4(a)(Holding Attachments for Coupler Parts)	-	-	-
4.1.4(b)(Holding Attachments for Coupler Parts)	-	-	-
4.2.1(Quick Coupled ~pe HDPE Fittings)	-	-	-
4.2.2(Quick Coupled ~pe HDPE Fittings)	-	-	-
4.2.3(Quick Coupled ~pe HDPE Fittings)	-	-	-
4.2.4(Quick Coupled ~pe HDPE Fittings)	-	-	-
4.2.5(Quick Coupled ~pe HDPE Fittings)	-	-	-
4.2.6(Quick Coupled ~pe HDPE Fittings)	-	-	-
4.2.7(Quick Coupled ~pe HDPE Fittings)	-	-	-
4.2.7(1 Dimensions of Quick Coupled Pipes and Fittings)	-	-	-
4.2.7(Reducers Table 1 and 2 of IS 8008 (Part 4))	-	-	-
4.2.7(Ferrule reducers Table 1 of IS 8008 (Part 5))	-	-	-
4.2.7(Pipe ends Table 1 of IS 8008 (Part 6))	-	-	-
4.2.7(End caps Table 1 of IS 8008 (Part 9))	-	-	-
4.2.7(Insert vatve couplers Table 1 of IS 8008 (Part 3))	-	-	-
4.2.7(Valve openers Table 1 of IS 8008 (Part 2))	-	-	-
5.2(Dimensions of Quick Coupled Sprinkler Saddles Table 1.)	-	-	-
6.1(Quick Coupled Pipes and Fittings)	-	-	-
6.1.1, 6.1.1.1(Leakage Test)	-	-	-
6.1.1, 6.1.1.1(Leakage Test)	-	-	-
6.1.2, 6.1.2.1(Hydraulic Proof Test)	-	-	-
6.1.2.2(Hydraulic Proof Test)	-	-	-
6.1.2.2(Hydraulic Proof Test)	-	-	-
6.1.3, 6.1.3.1(Weldability Test)	-	-	-
6.1.3.1.1(Weldability Test)	-	-	-
6.1.3.2(Quick coupled fittings)	-	-	-
6.2, 6.2.1(Quick Coupled Fittings)	-	-	-
7.2.1(Visual and Workmanship Requirement)	-	-	-
6.2 b(Material Identification - Male & Female Coupler)	-	-	-
6.3.3(Material Identification - Insert Valve Coupler)	-	-	-
6.3.3(Material Identification - Insert Valve Coupler)	-	-	-
6.3.4()	-	-	-
6.3.5(Material Identification - Saddle)	-	-	-
6.3.5(Material Identification - Pipe Ends)	-	-	-
6.3.6(Quick Coupled Pump Connectors - Visual)	-	-	-
4.2(Metallic Couplers)	-	-	-
4.2(Metallic Couplers)	-	-	-
7.2.1(Leakage Test)	-	-	-
Cl.4.1.3(Den sity Test)	-	-	-
Cl.4.1.3(MFR Test)	-	-	-
Cl.4.1.3(MFR Test)	-	-	-
Cl.4.1.3(MFR Test)	-	-	-
Cl.4.1.3(MFR Test)	-	-	-
Cl.4.1.3(Thermal Stabi lity)	-	-	-
Cl.4.1.3(Thermal Stabi lity)	-	-	-
Cl.4.1.3, T-1(Volatile Matter)	-	-	-
Cl.4.1.3, T-1(Volatile Matter)	-	-	-
Cl.4.1.3, T-1(Volatile Matter)	-	-	-
Cl.4.1.3, T-1(Volatile Matter)	-	-	-
Cl.4.1.3, T-1(Volatile Matter)	-	-	-
Cl.4.1.3, T-1(Volatile Matter)	-	-	-
Cl.4.1.3, T-1(Volatile Matter)	-	-	-
Cl.4.1.3, T-1(Water Content)	-	-	-
Cl.4.1.3, T-1(Water Content)	-	-	-
Cl.4.1.3, T-1(Water Content)	-	-	-
Cl.4.1.3, T-1(Water Content)	-	-	-
Cl.4.1.3, T-1(Water Content)	-	-	-
Cl.4.1.3, T-1(Water Content)	-	-	-
Cl.4.1.3, T-1(Water Content)	-	-	-
Cl.4.1.3, T-1(Water Content)	-	-	-
Cl.4.1.3, T-1(Water Content)	-	-	-
Cl.4.1.3, T-1(Water Content)	-	-	-
Cl.4.1.3, T-1(Water Content)	-	-	-
Cl.4.1.3, T-1(Water Content)	-	-	-
Cl.4.1.3, T-1(Water Content)	-	-	-
Cl.4.1.3, T-1(Water Content)	-	-	-
Cl.4.1.3, T-1(Water Content)	-	-	-
Cl.4.1.3, T-1(Water Content)	-	-	-
Cl.4.1.3, T-1(Water Content)	-	-	-
Cl.4.1.3, T-1(Water Content)	-	-	-
Cl.4.1.3, T-1(Water Content)	-	-	-
Cl.4.1.4(Carbon Black Content)	-	-	-
Cl.4.1.4(Carbon Black Content)	-	-	-
Cl.4.1.4(Carbon Black Content)	-	-	-
Cl.4.1.4(Carbon Black Di spersion)	-	-	-
Cl.4.1.4(Carbon Black Di spersion)	-	-	-
Cl.4.1.4(Carbon Black Di spersion)	-	-	-
Cl.5(Di men sion)	-	-	-
Cl.5.1.l(Outside Diameter)	-	-	-
Cl.5.1.l(Outside Diameter)	-	-	-
Cl.6.2.L(Wall Thickness)	-	-	-
Cl.6.2.4(Workmanship and Appearance)	-	-	-
Cl.6.2.6(Rubber Ring Hardness)	-	-	-
Cl.6.2.6(Ageing Test)	-	-	-
Cl.7.1.l(Visual Anneara nce)	-	-	-
Cl.7.1.2(Hydraulic Characteristic)	-	-	-
Cl.7.1.2(Hydraulic Characteristic)	-	-	-
Cl.7.1.2(Hydraulic Characteristic)	-	-	-
Cl.7.1.2(Hydraulic Characteristic)	-	-	-
Cl.7.1.3(Reversion Test)	-	-	-
Cl.7.1.3(Reversion Test)	-	-	-
Cl.7.1.4(Tensile Test)	-	-	-
Cl.7.1.4(Tensile Test)	-	-	-
Cl.7.1.4(Tensile Test)	-	-	-
Cl.7.1.4(Elongation)	-	-	-
Cl.7.1.4(Elongation)	-	-	-
Cl.7.1.5(Fusion Compatibility)	-	-	-
Cl.7.1.5(Fusion Compatibility)	-	-	-
Cl.7.1.5(Fusion Compatibility)	-	-	-
Cl.7.1.5(Fusion Compatibility)	-	-	-
Cl.7.1.6(Corrected Density)	-	-	-
Cl.7.1.7(MFR Test)	-	-	-
Cl.7.1.7(MFR Test)	-	-	-
Cl.7.1.7(MFR Test)	-	-	-
Cl.7.1.7(MFR Test)	-	-	-
Cl.7.2.l(Leakage Test)	-	-	-
Cl.7.2.l(Leakage Test)	-	-	-
Cl.7.2.l(Leakage Test)	-	-	-
Cl.7.2.l(Leakage Test)	-	-	-
Cl.7.2.l(Leakage Test)	-	-	-
Cl.7.2.2(Cl.7.2.2)	-	-	-
Cl.7.2.3(Weld ability Test)	-	-	-
Cl.7.2.3(Weld ability Test)	-	-	-
6.2 (iii) Rubber Rings (a) Shore hardness(Shore hardness)	-	-	-
6.2 (iii) Rubber Rings (b) Accelerated Storage test(Accelerated Storage test)	-	-	-
5(Dimensions of pipe (outside diameter, ovality, wall thickness))	-	-	-
6.1(Thermal Stability (OIT))	-	-	-
6.1(Volatile Matter)	-	-	-
6.1(Water content)	-	-	-
6.1(Tensile strength at Yield & Elongation at break)	-	-	-
6.1(Carbon Black Content)	-	-	-
6.1(Carbon Black Dispersion)	-	-	-
6.2.1(Base Density x 2)	-	-	-
6.2.1(Melt Flow Index x 2)	-	-	-
6.2.1(Thermal Stability (OIT) x 2)	-	-	-
6.2.1(Volatile Matter x 2)	-	-	-
6.2.1(Water content x 2)	-	-	-
6.2.1(Carbon Black Content x 2)	-	-	-
6.2.1(Carbon Black Dispersion x 2)	-	-	-
6.2.1(Wall thickness of male & female coupler)	-	-	-
6.2.4(Workmanship and appearance (Visual))	-	-	-
6.2.5(Holding attachment for coupler parts)	-	-	-
6.2.5(Material Composition (Chemical Analysis))	-	-	-
4.2.2(Coating thickness (Hot dip Galvanized or Electroplated or Passivated or Powder Coated))	-	-	-
6.2.6(Material Identification (Chemical Analysis))	-	-	-
6.2.6(Color)	-	-	-
6.2.6(Rubber Ring Hardness Shore – A (Before Ageing))	-	-	-
6.2.6(Ageing Charges for rubber ring)	-	-	-
7.1.1(Visual appearance of pipes)	-	-	-
7.1.2(Hydraulic Characteristics)	-	-	-
7.1.2((a) Acceptance Test (48 hrs) / 80˚ C)	-	-	-
7.1.2((b) Type test ( 165 hrs) / 80˚ C)	-	-	-
7.1.3(Reversion)	-	-	-
7.1.4(Tensile strength & elongation)	-	-	-
7.1.5(Fusion Compatibility test)	-	-	-
7.1.5((a) Acceptance Test (48 hrs) / 80˚ C)	-	-	-
7.1.5((b) Type test ( 165 hrs) / 80˚ C)	-	-	-
7.1.6(Corrected Density)	-	-	-
7.1.6(Base Density)	-	-	-
7.1.6(Carbon black Content)	-	-	-
7.1.7(Melt Flow Rate (MFR))	-	-	-
7.2.1(Leakage test 1hour / 27°C)	-	-	-
7.2.2(Hydraulic Proof test 1hour / 27°C)	-	-	-
7.2.3((a) Acceptance Test (48 hrs) / 80˚ C)	-	-	-
7.2.3((b) Type test ( 165 hrs) / 80˚ C)	-	-	-
8(Supply of pipe (Visual))	-	-	-
4.1.1 (Table-1)(Density)	-	-	-
4.1.1 (Table-1)(Melt Flow Index)	-	-	-
4.1.1 (Table-1)(Oxidation Induction Time)	-	-	-
4.1.1 (Table-1)(Volatile Matter)	-	-	-
4.1.1 (Table-1)(Water content)	-	-	-
4.1.1 (Table-1)(Tensile strength at Yield & Elongation at break)	-	-	-
4.1.4(Carbon Black Content)	-	-	-
4.1.4(Carbon Black Dispersion)	-	-	-
4.1.1(Polyethylene material)	-	-	-
4.1.3, Table 1,(i)(Bass density)	-	-	-
4.1.3, Table 1,(ii)(Melt flow rate)	-	-	-
4.1.3, Table 1,(iii)(Thermal stability)	-	-	-
4.1.3, Table 1,(iv)(Volatile matter)	-	-	-
4.1.3, Table 1,(v)(Water content)	-	-	-
4.1.3, Table 1,(vi)(Minimum tensile strength at yield)	-	-	-
4.1.3, Table 1,(vii)(Minimum elongation at break)	-	-	-
4.1.4(The Carbon Content and Dispersion)	-	-	-
4.1.5(Carbon Black Specification)	-	-	-
4.1.6(Antioxidant)	-	-	-
4.1.7(Rework Material)	-	-	-
4.2(Metallic Couplers)	-	-	-
5.1, Table 1,(i)(Plain pipes)	-	-	-
5.1, Table 1,(ii)(90° Bends and tee)	-	-	-
5.1, Table 1,(iii)(Base pipe )	-	-	-
5.1, Table 1,(iv)(PCN)	-	-	-
5.1, Table 1,(v)(Reducers, ferrule reducers)	-	-	-
5.1, Table 1,(vi)(End caps, insert valve coupler, valve openers)	-	-	-
5.1, Table 1,(vii)(Riser pipe and socket)	-	-	-
7.1.1(Visual Appearance and Workmanship)	-	-	-
7.1.2(Hydraulic Performance Characteristic)	-	-	-
7.1.3(Reversion Test)	-	-	-
7.1.4(Tensile Test)	-	-	-
7.1.5(Fusion Compatibility Test)	-	-	-
7.1.6(Corrected Density)	-	-	-
7.1.7(Melt flow rate)	-	-	-
7.2.1(Leakage Test)	-	-	-
7.2.2(Hydraulic Proof Test)	-	-	-
7.2.3(Weldability Test)	-	-	-
7.3(Quick Couple Fitting)	-	-	-
10(Marking)	-	-	-
5.1.2(Squareness)	-	-	-
Cl 6.3.5, Table 5 Dimension of Quick Coupled Sprinkler Saddles (Foot Batten)(Table 5 Dimension of Quick Coupled Sprinkler Saddles (Foot Batten))	-	-	-
4.1 (b)(HDPE couplers —)	-	-	-

22 May, 2027

-
Included w.e.f 10.07.2025 For finished products only

9081

Bureau Veritas (India) Pvt Ltd, Chennai

6108016

IS 14543 (2024)

Packaged Drinking Water Other than Packaged Natural Mineral Water Specification Third Revision

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.3(Appearance)	-	0	-
Cl-5.2.1(Escherichia coli or thermotolerant bacteria)	-	200	-
Cl-5.2.2(Coliform)	-	200	-
Cl-5.2.3(Staphylococcus aureus)	-	300	-
Cl-5.2.4(Sulphite Reducing Anaerobes)	-	300	-
Cl-5.2.5(Pseudomonas Aeruginosa)	-	200	-
Cl-5.2.6(Aerobic Microbial Count @ 37 deg C)	-	100	-
Cl-5.2.7(Yeast and mould)	-	200	-
Cl-5.2.8(Salmonella)	-	400	-
Cl-5.2.9(Vibrio cholera)	-	350	-
Cl-5.2.3(Faecal streptococci)	-	300	-
Cl-5.2.8(shigella)	-	400	-
Cl-5.2.9(V.parahaemolyticus)	-	350	-
5.2.6(Aerobic Microbial Count @ 20 to 22 deg C)	-	100	-
Cl-5.3, Table-2 (i)(Barium (as Ba))	-	100	-
Cl-5.3, Table-2 (ii)(Copper (as Cu))	-	100	-
Cl-5.3, Table-2 (iii)(Iron (as Fe))	-	100	-
Cl-5.3, Table-2 (iv)(Manganese (as Mn))	-	100	-
Cl-5.3, Table-2 (viii)(Zinc (as Zn))	-	100	-
Cl-5.3, Table-2 (ix)(Silver (as Ag))	-	100	-
Cl-5.3, Table-3 (i)(Mercury (as Hg))	-	100	-
Cl-5.3, Table-3 (ii)(Cadmium (as Cd))	-	100	-
Cl-5.3, Table-3 (iii)(Arsenic (as As))	-	100	-
Cl-5.3, Table-3 (v)(Lead (as Pb))	-	100	-
Cl-5.3, Table-3 (vi)(Chromium (as Cr))	-	100	-
Cl-5.3, Table-3 (vii)(Nickel (as Ni))	-	100	-
Cl-5.3, Table-3 (x)(Uranium)	-	100	-
Cl-5.3, Table-2 (x)(Aluminium (as A1))	-	100	-
Cl-5.3, Table-2 (xii)(Selenium (as Se))	-	100	-
Cl-5.3, Table-2 (xxiii)(Antimony (as Sb))	-	100	-
Cl-5.3, Table-2 (xxiv)(Borates (as B))	-	150	-
Cl-5.3, Table-2 (xv)(Calcium (as Ca))	-	100	-
Cl-5.3, Table-2 (xvi)(Magnesium (as Mg))	-	100	-
Cl-5.3, Table-2 (xvii)(Sodium (as Na))	-	100	-
Cl-5.3, Table-1 (i)(Colour, true colour units, Max)	-	50	-
Cl-5.3, Table-1 (ii)(Odour)	-	50	-
Cl-5.3, Table-1 (iii)(Taste)	-	50	-
Cl-5.3, Table-1 (iv)(Turbidity, nephelometric turbidity unit (NTU), Max)	-	100	-
Cl-5.3, Table-1 (v)(Total dissolved solids, mg/l, Max)	-	150	-
Cl-5.3, Table-1 (vi)(pH)	-	100	-
Cl-5.3, Table-2 (v)(Nitrate (as NO3 ))	-	150	-
Cl-5.3, Table-2 (vi)(Nitrite (as NO2 ))	-	150	-
Cl-5.3, Table-2 (vii)(Fluoride (as F))	-	100	-
Cl-5.3, Table-2 (xi)(Chloride (as Cl))	-	100	-
Cl-5.3, Table-2 (xiii)(Sulphate (as SO4 ))	-	150	-
Cl-5.3, Table-2 (xiv)(Alkalinity (as HCO3 ))	-	100	-
Cl-5.3, Table-2 (xviii)(Residual free chlorine)	-	100	-
Cl-5.3, Table-2 (xix)(Phenolic compounds (as C6H5OH))	-	150	-
Cl-5.3, Table-2 (xx)(Mineral oil)	-	150	-
Cl-5.3, Table-2 (xxi)(Anionic surface active agents)	-	100	-
Cl-5.3, Table-2 (xxii)(Sulphide)	-	150	-
Cl-5.3, Table-2 (xxv)(Bromates (as BrO3 ))	-	2000	-
Cl-5.3, Table-3 (iv)(Cyanide (as CN))	-	150	-
Cl-5.3, Table-3 (viii)(Polychlorinated biphenyl (PCB))	-	950	-
Cl-5.3, Table-3 (ix)(Polynuclear aromatic hydrocarbons)	-	1000	-
5.4/Annex D/i(P,P-DDT)	-	0	-
5.4/Annex D/ii(Lindane)	-	0	-
5.4/Annex D/iv(b-Endosulfan)	-	0	-
5.4/Annex D/xvi(Dieldrin)	-	0	-
5.4/Annex D/xvi(Aldrin)	-	0	-
5.4/Annex D/i(O,P-DDT)	-	0	-
5.4/Annex D/iv(a-Endosulfan)	-	0	-
5.4/Annex D/iii(d-HCH)	-	0	-
5.4/Annex D/i(O,P-DDD)	-	0	-
5.4/Annex D/i(P,P-DDE)	-	0	-
5.4/Annex D/i(O,P-DDE)	-	0	-
5.4/Annex D/iii(a-HCH)	-	0	-
5.4/Annex D/iii(β- HCH)	-	0	-
5.4/Annex D/iv(Endosulfan sulfate)	-	0	-
5.4/Annex D/i(P,P-DDD)	-	0	-
5.4/Annex D/xii(Alachlor)	-	0	-
5.4/Annex D/vii(Chlorpyrifos)	-	0	-
5.4/Annex D/x(Butachlor)	-	0	-
5.4/Annex D/vi(Ethion)	-	0	-
5.4/Annex D/xiv(Methyl parathion)	-	0	-
5.4/Annex D/xv(Malathion)	-	0	-
5.4/Annex D/viii(Phorate)	-	0	-
5.4/Annex D/v(Monochrotophos)	-	0	-
5.4/Annex D/xiii(Atrazine)	-	0	-
5.4/Annex D/viii(Phorate sulphoxide)	-	0	-
5.4/Annex D/viii(Phorate sulfone)	-	0	-
5.4/Annex D/xxvii(Methyl paraoxon)	-	0	-
5.4/Annex D/xxviii(Malaoxon)	-	0	-
5.4/Annex D/xi(Isoproturon)	-	0	-
5.4/Annex D/ix(2,4 –D)	-	0	-
Cl-5.4 (ii)(Total pesticide residue)	-	2500	-
Cl-5.1(General Requirements)	-	0	-
5.4 i)(Dieldrin)	-	0	-
5.4 i)(Aldrin)	-	0	-
5.4 i)(Malathion)	-	0	-
5.4, i)("oxygen analogue of Malathion (Malaoxon)")	-	0	-
5.4 i)(Methyl Paraoxon)	-	0	-
5.4 i)(Methyl Parathion)	-	0	-
5.4 i)(Atrazine)	-	0	-
5.4 i)(Alachlor)	-	0	-
5.4 i)(Isoproturon)	-	0	-
5.4 i)(Butachlor)	-	0	-
5.4 i)(2,4-D)	-	0	-
5.4 i)(Phorate sulphone)	-	0	-
5.4 i)(Phorate sulphoxide)	-	0	-
5.4 i)(Phorate)	-	0	-
5.4 i)(Chlorpyrifos)	-	0	-
5.4 i)(Ethion)	-	0	-
5.4 i)(Monocrotophos)	-	0	-
5.4 i)(Endosulfan Sulphate)	-	0	-
5.4 i)(beta-Endosulfan)	-	0	-
5.4 i)(alpha-Endosulfan)	-	0	-
5.4 i)(Delta-HCH)	-	0	-
5.4 i)(beta-HCH)	-	0	-
5.4 i)(alpha-HCH)	-	0	-
5.4 i)(Gamma-HCH (Lindane))	-	0	-
5.4 i)(p,p DDD)	-	0	-
5.4 i)(o,p DDD)	-	0	-
5.4 i)(p,p DDE)	-	0	-
5.4, i)(o,p DDE)	-	0	-
5.4 i)(p,p DDT)	-	0	-
5.4 i)(o,p DDT)	-	0	-
Table 3, x)(Uranium)	-	0	-
Cl-5.4 (i)(Pesticide residues considered individually)	-	0	-
5.3(Appearance)	-	0	-
Cl-5.2.1(Escherichia coli or thermotolerant bacteria)	-	200	-
Cl-5.2.2(Coliform)	-	200	-
Cl-5.2.3(Staphylococcus aureus)	-	300	-
Cl-5.2.4(Sulphite Reducing Anaerobes)	-	300	-
Cl-5.2.5(Pseudomonas Aeruginosa)	-	200	-
Cl-5.2.6(Aerobic Microbial Count @ 37 deg C)	-	100	-
Cl-5.2.7(Yeast and mould)	-	200	-
Cl-5.2.8(Salmonella)	-	400	-
Cl-5.2.9(Vibrio cholera)	-	350	-
Cl-5.2.3(Faecal streptococci)	-	300	-
Cl-5.2.8(shigella)	-	400	-
Cl-5.2.9(V.parahaemolyticus)	-	350	-
5.2.6(Aerobic Microbial Count @ 20 to 22 deg C)	-	100	-
Cl-5.3, Table-2 (i)(Barium (as Ba))	-	100	-
Cl-5.3, Table-2 (ii)(Copper (as Cu))	-	100	-
Cl-5.3, Table-2 (iii)(Iron (as Fe))	-	100	-
Cl-5.3, Table-2 (iv)(Manganese (as Mn))	-	100	-
Cl-5.3, Table-2 (viii)(Zinc (as Zn))	-	100	-
Cl-5.3, Table-2 (ix)(Silver (as Ag))	-	100	-
Cl-5.3, Table-3 (i)(Mercury (as Hg))	-	100	-
Cl-5.3, Table-3 (ii)(Cadmium (as Cd))	-	100	-
Cl-5.3, Table-3 (iii)(Arsenic (as As))	-	100	-
Cl-5.3, Table-3 (v)(Lead (as Pb))	-	100	-
Cl-5.3, Table-3 (vi)(Chromium (as Cr))	-	100	-
Cl-5.3, Table-3 (vii)(Nickel (as Ni))	-	100	-
Cl-5.3, Table-3 (x)(Uranium)	-	100	-
Cl-5.3, Table-2 (x)(Aluminium (as A1))	-	100	-
Cl-5.3, Table-2 (xii)(Selenium (as Se))	-	150	-
Cl-5.3, Table-2 (xxiii)(Antimony (as Sb))	-	100	-
Cl-5.3, Table-2 (xxiv)(Borates (as B))	-	150	-
Cl-5.3, Table-2 (xv)(Calcium (as Ca))	-	100	-
Cl-5.3, Table-2 (xvi)(Magnesium (as Mg))	-	100	-
Cl-5.3, Table-2 (xvii)(Sodium (as Na))	-	100	-
Cl-5.3, Table-1 (i)(Colour, true colour units, Max)	-	50	-
Cl-5.3, Table-1 (ii)(Odour)	-	50	-
Cl-5.3, Table-1 (iii)(Taste)	-	50	-
Cl-5.3, Table-1 (iv)(Turbidity, nephelometric turbidity unit (NTU), Max)	-	100	-
Cl-5.3, Table-1 (v)(Total dissolved solids, mg/l, Max)	-	150	-
Cl-5.3, Table-1 (vi)(pH)	-	100	-
Cl-5.3, Table-2 (v)(Nitrate (as NO3 ))	-	150	-
Cl-5.3, Table-2 (vi)(Nitrite (as NO2 ))	-	150	-
Cl-5.3, Table-2 (vii)(Fluoride (as F))	-	100	-
Cl-5.3, Table-2 (xi)(Chloride (as Cl))	-	100	-
Cl-5.3, Table-2 (xiii)(Sulphate (as SO4 ))	-	150	-
Cl-5.3, Table-2 (xiv)(Alkalinity (as HCO3 ))	-	100	-
Cl-5.3, Table-2 (xviii)(Residual free chlorine)	-	100	-
Cl-5.3, Table-2 (xix)(Phenolic compounds (as C6H5OH))	-	150	-
Cl-5.3, Table-2 (xx)(Mineral oil)	-	150	-
Cl-5.3, Table-2 (xxi)(Anionic surface active agents)	-	100	-
Cl-5.3, Table-2 (xxii)(Sulphide)	-	150	-
Cl-5.3, Table-2 (xxv)(Bromates (as BrO3 ))	-	2000	-
Cl-5.3, Table-3 (iv)(Cyanide (as CN))	-	150	-
Cl-5.3, Table-3 (viii)(Polychlorinated biphenyl (PCB))	-	950	-
Cl-5.3, Table-3 (ix)(Polynuclear aromatic hydrocarbons)	-	1000	-
5.4/Annex D/i(P,P-DDT)	-	0	-
5.4/Annex D/ii(Lindane)	-	0	-
5.4/Annex D/iv(b-Endosulfan)	-	0	-
5.4/Annex D/xvi(Dieldrin)	-	0	-
5.4/Annex D/xvi(Aldrin)	-	0	-
5.4/Annex D/i(O,P-DDT)	-	0	-
5.4/Annex D/iv(a-Endosulfan)	-	0	-
5.4/Annex D/iii(d-HCH)	-	0	-
5.4/Annex D/i(O,P-DDD)	-	0	-
5.4/Annex D/i(P,P-DDE)	-	0	-
5.4/Annex D/i(O,P-DDE)	-	0	-
5.4/Annex D/iii(a-HCH)	-	0	-
5.4/Annex D/iii(β- HCH)	-	0	-
5.4/Annex D/iv(Endosulfan sulfate)	-	0	-
5.4/Annex D/i(P,P-DDD)	-	0	-
5.4/Annex D/xii(Alachlor)	-	0	-
5.4/Annex D/vii(Chlorpyrifos)	-	0	-
5.4/Annex D/x(Butachlor)	-	0	-
5.4/Annex D/vi(Ethion)	-	0	-
5.4/Annex D/xiv(Methyl parathion)	-	0	-
5.4/Annex D/xv(Malathion)	-	0	-
5.4/Annex D/viii(Phorate)	-	0	-
5.4/Annex D/v(Monochrotophos)	-	0	-
5.4/Annex D/xiii(Atrazine)	-	0	-
5.4/Annex D/viii(Phorate sulphoxide)	-	0	-
5.4/Annex D/viii(Phorate sulfone)	-	0	-
5.4/Annex D/xxvii(Methyl paraoxon)	-	0	-
5.4/Annex D/xxviii(Malaoxon)	-	0	-
5.4/Annex D/xi(Isoproturon)	-	0	-
5.4/Annex D/ix(2,4 –D)	-	0	-
Cl-5.4 (ii)(Total pesticide residue)	-	2500	-
Cl-5.1(General Requirements)	-	0	-
5.4 i)(Dieldrin)	-	0	-
5.4 i)(Aldrin)	-	0	-
5.4 i)(Malathion)	-	0	-
5.4, i)("oxygen analogue of Malathion (Malaoxon)")	-	0	-
5.4 i)(Methyl Paraoxon)	-	0	-
5.4 i)(Methyl Parathion)	-	0	-
5.4 i)(Atrazine)	-	0	-
5.4 i)(Alachlor)	-	0	-
5.4 i)(Isoproturon)	-	0	-
5.4 i)(Butachlor)	-	0	-
5.4 i)(2,4-D)	-	0	-
5.4 i)(Phorate sulphone)	-	0	-
5.4 i)(Phorate sulphoxide)	-	0	-
5.4 i)(Phorate)	-	0	-
5.4 i)(Chlorpyrifos)	-	0	-
5.4 i)(Ethion)	-	0	-
5.4 i)(Monocrotophos)	-	0	-
5.4 i)(Endosulfan Sulphate)	-	0	-
5.4 i)(beta-Endosulfan)	-	0	-
5.4 i)(alpha-Endosulfan)	-	0	-
5.4 i)(Delta-HCH)	-	0	-
5.4 i)(beta-HCH)	-	0	-
5.4 i)(alpha-HCH)	-	0	-
5.4 i)(Gamma-HCH (Lindane))	-	0	-
5.4 i)(p,p DDD)	-	0	-
5.4 i)(o,p DDD)	-	0	-
5.4 i)(p,p DDE)	-	0	-
5.4, i)(o,p DDE)	-	0	-
5.4 i)(p,p DDT)	-	0	-
5.4 i)(o,p DDT)	-	0	-
Table 3, x)(Uranium)	-	0	-
Cl-5.4 (i)(Pesticide residues considered individually)	-	0	-
5.3(Appearance)	-	-	-
Cl-5.2.1(Escherichia coli or thermotolerant bacteria)	-	-	-
Cl-5.2.2(Coliform)	-	-	-
Cl-5.2.3(Staphylococcus aureus)	-	-	-
Cl-5.2.4(Sulphite Reducing Anaerobes)	-	-	-
Cl-5.2.5(Pseudomonas Aeruginosa)	-	-	-
Cl-5.2.6(Aerobic Microbial Count @ 37 deg C)	-	-	-
Cl-5.2.7(Yeast and mould)	-	-	-
Cl-5.2.8(Salmonella)	-	-	-
Cl-5.2.9(Vibrio cholera)	-	-	-
Cl-5.2.3(Faecal streptococci)	-	-	-
Cl-5.2.8(shigella)	-	-	-
Cl-5.2.9(V.parahaemolyticus)	-	-	-
5.2.6(Aerobic Microbial Count @ 20 to 22 deg C)	-	-	-
Cl-5.3, Table-2 (i)(Barium (as Ba))	-	-	-
Cl-5.3, Table-2 (ii)(Copper (as Cu))	-	-	-
Cl-5.3, Table-2 (iii)(Iron (as Fe))	-	-	-
Cl-5.3, Table-2 (iv)(Manganese (as Mn))	-	-	-
Cl-5.3, Table-2 (viii)(Zinc (as Zn))	-	-	-
Cl-5.3, Table-2 (ix)(Silver (as Ag))	-	-	-
Cl-5.3, Table-3 (i)(Mercury (as Hg))	-	-	-
Cl-5.3, Table-3 (ii)(Cadmium (as Cd))	-	-	-
Cl-5.3, Table-3 (iii)(Arsenic (as As))	-	-	-
Cl-5.3, Table-3 (v)(Lead (as Pb))	-	-	-
Cl-5.3, Table-3 (vi)(Chromium (as Cr))	-	-	-
Cl-5.3, Table-3 (vii)(Nickel (as Ni))	-	-	-
Cl-5.3, Table-3 (x)(Uranium)	-	-	-
Cl-5.3, Table-2 (x)(Aluminium (as A1))	-	-	-
Cl-5.3, Table-2 (xii)(Selenium (as Se))	-	-	-
Cl-5.3, Table-2 (xxiii)(Antimony (as Sb))	-	-	-
Cl-5.3, Table-2 (xxiv)(Borates (as B))	-	-	-
Cl-5.3, Table-2 (xv)(Calcium (as Ca))	-	-	-
Cl-5.3, Table-2 (xvi)(Magnesium (as Mg))	-	-	-
Cl-5.3, Table-2 (xvii)(Sodium (as Na))	-	-	-
Cl-5.3, Table-1 (i)(Colour, true colour units, Max)	-	-	-
Cl-5.3, Table-1 (ii)(Odour)	-	-	-
Cl-5.3, Table-1 (iii)(Taste)	-	-	-
Cl-5.3, Table-1 (iv)(Turbidity, nephelometric turbidity unit (NTU), Max)	-	-	-
Cl-5.3, Table-1 (v)(Total dissolved solids, mg/l, Max)	-	-	-
Cl-5.3, Table-1 (vi)(pH)	-	-	-
Cl-5.3, Table-2 (v)(Nitrate (as NO3 ))	-	-	-
Cl-5.3, Table-2 (vi)(Nitrite (as NO2 ))	-	-	-
Cl-5.3, Table-2 (vii)(Fluoride (as F))	-	-	-
Cl-5.3, Table-2 (xi)(Chloride (as Cl))	-	-	-
Cl-5.3, Table-2 (xiii)(Sulphate (as SO4 ))	-	-	-
Cl-5.3, Table-2 (xiv)(Alkalinity (as HCO3 ))	-	-	-
Cl-5.3, Table-2 (xviii)(Residual free chlorine)	-	-	-
Cl-5.3, Table-2 (xix)(Phenolic compounds (as C6H5OH))	-	-	-
Cl-5.3, Table-2 (xx)(Mineral oil)	-	-	-
Cl-5.3, Table-2 (xxi)(Anionic surface active agents)	-	-	-
Cl-5.3, Table-2 (xxii)(Sulphide)	-	-	-
Cl-5.3, Table-2 (xxv)(Bromates (as BrO3 ))	-	-	-
Cl-5.3, Table-3 (iv)(Cyanide (as CN))	-	-	-
Cl-5.3, Table-3 (viii)(Polychlorinated biphenyl (PCB))	-	-	-
Cl-5.3, Table-3 (ix)(Polynuclear aromatic hydrocarbons)	-	-	-
5.4/Annex D/i(P,P-DDT)	-	-	-
5.4/Annex D/ii(Lindane)	-	-	-
5.4/Annex D/iv(b-Endosulfan)	-	-	-
5.4/Annex D/xvi(Dieldrin)	-	-	-
5.4/Annex D/xvi(Aldrin)	-	-	-
5.4/Annex D/i(O,P-DDT)	-	-	-
5.4/Annex D/iv(a-Endosulfan)	-	-	-
5.4/Annex D/iii(d-HCH)	-	-	-
5.4/Annex D/i(O,P-DDD)	-	-	-
5.4/Annex D/i(P,P-DDE)	-	-	-
5.4/Annex D/i(O,P-DDE)	-	-	-
5.4/Annex D/iii(a-HCH)	-	-	-
5.4/Annex D/iii(β- HCH)	-	-	-
5.4/Annex D/iv(Endosulfan sulfate)	-	-	-
5.4/Annex D/i(P,P-DDD)	-	-	-
5.4/Annex D/xii(Alachlor)	-	-	-
5.4/Annex D/vii(Chlorpyrifos)	-	-	-
5.4/Annex D/x(Butachlor)	-	-	-
5.4/Annex D/vi(Ethion)	-	-	-
5.4/Annex D/xiv(Methyl parathion)	-	-	-
5.4/Annex D/xv(Malathion)	-	-	-
5.4/Annex D/viii(Phorate)	-	-	-
5.4/Annex D/v(Monochrotophos)	-	-	-
5.4/Annex D/xiii(Atrazine)	-	-	-
5.4/Annex D/viii(Phorate sulphoxide)	-	-	-
5.4/Annex D/viii(Phorate sulfone)	-	-	-
5.4/Annex D/xxvii(Methyl paraoxon)	-	-	-
5.4/Annex D/xxviii(Malaoxon)	-	-	-
5.4/Annex D/xi(Isoproturon)	-	-	-
5.4/Annex D/ix(2,4 –D)	-	-	-
Cl-5.4 (ii)(Total pesticide residue)	-	-	-
Cl-5.1(General Requirements)	-	-	-
5.4 i)(Dieldrin)	-	-	-
5.4 i)(Aldrin)	-	-	-
5.4 i)(Malathion)	-	-	-
5.4, i)("oxygen analogue of Malathion (Malaoxon)")	-	-	-
5.4 i)(Methyl Paraoxon)	-	-	-
5.4 i)(Methyl Parathion)	-	-	-
5.4 i)(Atrazine)	-	-	-
5.4 i)(Alachlor)	-	-	-
5.4 i)(Isoproturon)	-	-	-
5.4 i)(Butachlor)	-	-	-
5.4 i)(2,4-D)	-	-	-
5.4 i)(Phorate sulphone)	-	-	-
5.4 i)(Phorate sulphoxide)	-	-	-
5.4 i)(Phorate)	-	-	-
5.4 i)(Chlorpyrifos)	-	-	-
5.4 i)(Ethion)	-	-	-
5.4 i)(Monocrotophos)	-	-	-
5.4 i)(Endosulfan Sulphate)	-	-	-
5.4 i)(beta-Endosulfan)	-	-	-
5.4 i)(alpha-Endosulfan)	-	-	-
5.4 i)(Delta-HCH)	-	-	-
5.4 i)(beta-HCH)	-	-	-
5.4 i)(alpha-HCH)	-	-	-
5.4 i)(Gamma-HCH (Lindane))	-	-	-
5.4 i)(p,p DDD)	-	-	-
5.4 i)(o,p DDD)	-	-	-
5.4 i)(p,p DDE)	-	-	-
5.4, i)(o,p DDE)	-	-	-
5.4 i)(p,p DDT)	-	-	-
5.4 i)(o,p DDT)	-	-	-
Table 3, x)(Uranium)	-	-	-
Cl-5.4 (i)(Pesticide residues considered individually)	-	-	-

31 Jul, 2029

-
Included w.e.f.28.05.2025 Exclusion Cl-5.3, Table-4 (i) (Alpha emitters, Becquerel (Bq/l)) Cl-5.3, Table-4 (ii) (Beta emitters, Becquerel (Bq/l),)

9082

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 1239 : Part 1 (2004)

Steel tubes, tubulars and other wrought steel fittings - Specification: Part 1 steel tubes (Sixth Revision)

Steel Tube

13800 View breakup
For BIS samples: 1.5 times of BIS testing charges,

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.2 AND AS PER IS 10748(CARBON)	-	600	5% discount for BIS
6.2 AND AS PER IS 10748(MANGANESE)	-	600	5% discount for BIS
6.2 AND AS PER IS 513(SILICON)	-	600	5% discount for BIS
6.2 AND AS PER IS 10748(SULPHUR)	-	600	5% discount for BIS
6.2 AND AS PER IS 10748(PHOSPHORUS)	-	600	5% discount for BIS
6.2 AND AS PER IS 10748(COPPER)	-	600	5% discount for BIS
6.2 AND AS PER IS 513(NITROGEN)	-	600	5% discount for BIS
Clause - 6.1.1, Table-1(ALUMINIUM)	-	600	5% discount for BIS
Cl 8(Outer Diameter, Thickness & Mass)	-	600	5% discount for BIS
Cl. 8, 9 Table 3,4 & 5(Thickness)	-	600	5% discount for BIS
10.1(Thared Joints(IS:554))	-	600	5% discount for BIS
11(Length & tolerance)	-	600	5% discount for BIS
13.0(Leak Proof Test)	-	600	5% discount for BIS
Cl. 14.1(Tensile Strength)	-	600	5% discount for BIS
Cl. 14.1.1(Elongation)	-	600	5% discount for BIS
Cl. 14.2(Bend Test (uto and including 50 mm NB))	-	600	5% discount for BIS
Cl. 14.3(Flattening test (Over 50 mm NB))	-	600	5% discount for BIS
Cl 15(Workmanship)	-	600	5% discount for BIS

-
The scope may be restricted for plain ended pipe only. The scope may be restricted upto 40 mm

9083

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 1161 (2014)

Steel tubes for structural purposes - Specification (Fifth Revision)

Steel tubes for structural purposes

8200 View breakup
For BIS samples: 1.5 times of BIS testing charges,

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause - 5.1, Table-3( CARBON)	-	300	5% discount for BIS
Clause - 5.1, Table-3(MANGANESE)	-	300	5% discount for BIS
Clause - 5.1, Table-3(SILICON)	-	300	5% discount for BIS
Clause - 5.1, Table-3(SULPHUR)	-	300	5% discount for BIS
Clause - 5.1, Table-3(PHOSPHURS)	-	300	5% discount for BIS
5 AND AS PER IS 10748(COPPER)	-	300	5% discount for BIS
Clause - 5.1, Table-3( ALUMINIUM)	-	300	5% discount for BIS
Cl 6(Outer Diameter, Thickness & Mass)	-	300	5% discount for BIS
Cl 7(Workmanship)	-	100	5% discount for BIS
8 AND AS PER IS 4736(MASS OF ZINC COATING)	-	300	5% discount for BIS
8.0(Uniformity of galvanized coating - IS 4736)	-	300	5% discount for BIS
9(Straightness)	-	300	5% discount for BIS
10(Lengths)	-	100	5% discount for BIS
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	300	5% discount for BIS
Clause 11.2, Table -2(Yield Strength)	-	300	5% discount for BIS
Clause 11.2, Table -2(Elongation)	-	300	5% discount for BIS
Cl 11.3.1(Cold bend test (upto & including 50 mm NB))	-	300	5% discount for BIS
12(Marking)	-	100	5% discount for BIS
13.0(Oiling and Painting - Visual)	-	200	5% discount for BIS
Clause - 5.1, Table-3(NITROGEN)	-	300	5% discount for BIS

-
The scope may be restricted upto 40 mm

9084

International Testing Centre, MSME Technology Development Centre, Meerut

8177804

IS 16726 (2018)

Textiles – Pouch for ammunition and grenades made of disruptive pattern nylon 6 6 – Specification

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4(STITCHING)	-	300	-
Clause 5(FREEDOM FROM DEFECT)	-	300	-
Clauses 6.1 and 6.2, Table 2 (i)(Nature of fibre/filament)	-	800	-
Clauses 6.1 and 6.2, Table 2 (ii)(Nature of coating)	-	500	-
Clauses 6.1 and 6.2, Table 2 (iii)(Weave)	-	300	-
Clauses 6.1 and 6.2, Table 2 (iv)(End/dm)	-	300	-
Clauses 6.1 and 6.2, Table 2 (v)(Picks/dm)	-	300	-
Clauses 6.1 and 6.2, Table 2 (vi)(Mass, g/sq. m)	-	300	-
Clauses 6.1 and 6.2, Table 2 (vii)("Tearing strength, N, Min: (a) Warpway (b) Weftway")	-	500	-
Clauses 6.1 and 6.2, Table 2 (viii)(Abrasion resistance (Martindale), Using abradant ‘Emery paper No. 600’ at load of 200 g on uncoated surface)	-	1000	-
Clauses 6.1 and 6.2, Table 2 (ix)("Colour fastness to washing, Test C (3), Min: (a) Change in colour (b) Staining on adjacent fabric")	-	1500	-
Clauses 6.1 and 6.2, Table 2 (x)("Colour fastness to perspiration, Min: (a) Change in colour (b) Staining on adjacent fabric")	-	1000	-
Clauses 6.1 and 6.2, Table 2 (xi)("Colour fastness to rubbing, Min: (a) Dry (b) Wet")	-	500	-
Clauses 6.1 and 6.2, Table 2 (xii)(Colour fastness to light, Min)	-	1500	-
Clauses 6.1 and 6.2, Table 2 (xiii)(Dimensional change due to relaxation, percentage, Max: (a) Warpway (b) Weftway)	-	1000	-
Clauses 6.1 and 6.2, Table 2 (xiv)(Water proofness at 30 cm water column height for 60 min)	-	800	-
Clauses 6.1 and 6.2, Table 2 (xv)(Water repellency (uncoated face), Spray rating, Min)	-	800	-
Clauses 6.1 and 6.2, Table 2 (xvi)(Separation of PU film)	-	300	-
Clauses 6.1 and 6.2, Table 2 (xvii)(Resistance to accelerated ageing at 70 ± 1°C for 168 h in air circulating oven)	-	1000	-
Clauses 6.1 and 6.2, Table 2 (xviii)(Resistance to damage by flexing after 100 000 cycles)	-	1000	-
Clause 6.3, Table 3 (i)(Nature of fibre/filament)	-	800	-
Clause 6.3, Table 3 (ii)(Number of holes per square inch (Rectangular in shape))	-	300	-
Clause 6.3, Table 3 (iii)(Mass, g/sq. m)	-	300	-
Clause 6.3, Table 3 (iv)(Colour fastness to washing, Test C(3), Min: (a) Change in colour (b) Staining on adjacent fabric)	-	1000	-
Clause 6.3, Table 3 (v)(Colour fastness to perspiration, Min: (a) Change in colour (b) Staining on adjacent fabric)	-	1000	-
Clause 6.3, Table 3 (vi)(Colour fastness to light, Min)	-	1500	-
Clause 6.3, Table 3 (vii)(Dimensional change due to relaxation, percentage, Max: (a) Warpway (b) Weftway)	-	800	-
Clause 6.3, Table 3 (viii)(pH value of aqueous extract (Cold method))	-	500	-
Clause 6.4, Table 4 (i)(Nature of fibre/filament)	-	800	-
Clause 6.4 Table 4 (ii)(End/dm)	-	300	-
Clause 6.4, Table 4 (iii)(Picks/dm)	-	300	-
Clause 6.4, Table 4 (iv)(Mass per linear meter, g)	-	300	-
Clause 6.4 Table 4 (v)(Breaking strength, N, Min (2.5 cm × full width fabric between grips))	-	500	-
Clause 6.4, Table 4 (vi)(Colour fastness to washing, Test C(3), Min: a) Change in colour b) Staining on adjacent fabric)	-	1000	-
Clause 6.4, Table 4 (vii)(Colour fastness to light, Min)	-	1500	-
Clause 6.4, Table 4 (vii)(pH value of aqueous extract (Cold method))	-	500	-
Clause 6.5, Table 5 (i)(Nature of fibre/filament)	-	800	-
Clause 6.5, Table 5 (i)(Colour fastness to washing, Test C(3), Min: a) Change in colour b) Staining on adjacent fabric)	-	1000	-
Clause 6.5, Table 5 (i)(Colour fastness to light, Min)	-	1500	-
Clause 6.5, Table 5 (i)(Dimensional change due to relaxation, percentage, Max: a) Warpway b) Weftway)	-	800	-
Clause 6.5, Table 5 (i)(pH value of aqueous extract (Cold method))	-	500	-
Clause 6.9, Table 6 (i)(Nature of material)	-	800	-
Clause 6.9, Table 6 (i)(Resistance to accelerated ageing)	-	1500	-
Clause 6.9, Table 6 (i)(Resistance to low temperature)	-	1000	-
Clause 6.9, Table 6 (i)(Colour fastness to light, Min)	-	1500	-
Clause 6.9, Table 6 (i)(Pull load, kgf, Min (For quick release buckle only))	-	500	-
Clause 6.6(The Component – 8, Component – 9, Component – 10 and Component – 11 of the 'Pouch')	-	4000	-
Clause 6.7(The Component – 12 of the ‘Pouch’)	-	3000	-
Clause 6.8(Component – 13, Component –14 and Component –15 used in the ‘Pouch’)	-	4000	-
Clause 7(MARKING)	-	300	-
Clause 8(PACKING)	-	300	-
3(Material and manufacture)	-	500	-
4(Stitching)	-	300	-
6.1 and 6.2 - Table 2 - (i)(Nature of fibre filament)	-	800	-
6.1 and 6.2 - Table 2 - (ii)(Nature of coating)	-	500	-
6.1 and 6.2 - Table 2 - (iii)(Weave)	-	300	-
6.1 and 6.2 - Table 2 - (iv)(End/dm)	-	300	-
6.1 and 6.2 - Table 2 - (v)(Picks/dm)	-	300	-
6.1 and 6.2 - Table 2 - (vi)(Mass)	-	300	-
6.1 and 6.2 - Table 2 - (vii)(Tearing strength)	-	500	-
6.1 and 6.2 - Table 2 - (viii)(Abrasion resistance)	-	800	-
6.1 and 6.2 - Table 2 - (ix)(Colour fastness to washing)	-	1000	-
6.1 and 6.2 - Table 2 - (x)(Colour fastness to perspiration)	-	1000	-
6.1 and 6.2 - Table 2 - (xi)(Colour fastness to rubbing)	-	1000	-
6.1 and 6.2 - Table 2 - (xii)(Colour fastness to light)	-	1500	-
6.1 and 6.2 - Table 2 - (xiii)(Dimensional change due to relaxation)	-	800	-
6.1 and 6.2 - Table 2 - (xiv)(Water proofness at 30 cm water column height)	-	800	-
6.1 and 6.2 - Table 2 - (xv)(Water repellency, spray rating)	-	800	-
6.1 and 6.2 - Table 2 - (xvi)(Separation of PU film)	-	300	-
6.1 and 6.2 - Table 2 - (xvii)(Resistance to accelerated)	-	1500	-
6.1 and 6.2 - Table 2 - (xviii)(Resistance to damage by flexing after 100000 cycles)	-	800	-
6.3 - Table 3 - (i)(Nature of fibre/ filament)	-	800	-
6.3 - Table 3 - (ii)(Number of holes per square inch)	-	300	-
6.3 - Table 3 - (iii)(Mass)	-	300	-
6.3 - Table 3 - (iv)(Colour fastness to washing)	-	1000	-
6.3 - Table 3 - (v)(Colour fastness to perspiration)	-	1000	-
6.3 - Table 3 - (vi)(Colour fastness to light)	-	1500	-
6.3 - Table 3 - (vii)(Dimensional change due to relaxation)	-	800	-
6.3 - Table 3 - (viii)(pH value of aqueous extract)	-	500	-
6.4 - Table 4 - (i)(Nature of fibre / filament)	-	800	-
6.4 - Table 4 - (ii)(6.4 - Table 4 - (iii))	-	300	-
6.4 - Table 4 - (iv)(Mass per linear meter)	-	300	-
6.4 - Table 4 - (v)(Breaking strength)	-	500	-
6.4 - Table 4 - (vi)(Colour fastness to washing)	-	1000	-
6.4 - Table 4 - (vii)(Colour fastness to light)	-	1500	-
6.4 - Table 4 - (viii)(pH value of aqueous extract)	-	500	-
6.5 - Table 5 - (i)(Nature of fibre/filament)	-	800	-
6.5 - Table 5 - (ii)(Colour fastness to washing)	-	1000	-
6.5 - Table 5 - (iii)(Colour fastness to light)	-	1500	-
6.5 - Table 5 - (iv)(Dimensional change due to relaxation)	-	800	-
6.5 - Table 5 - (v)(pH value of aquesous extract)	-	500	-
6.9 - Table 6 - (i)(Nature of material)	-	800	-
6.9 - Table 6 - (ii)(Resistance to accelerated ageing)	-	1500	-
6.9 - Table 6 - (iii)(Resistance to low temperature)	-	1500	-
6.9 - Table 6 - (iv)(Colour fastness to light)	-	1500	-
6.9 - Table 6 - (v)(Pull load)	-	500	-
7(Marking)	-	300	-
8(Packing)	-	300	-
Cl-6.6 (Cl-7.1 of IS 8156)(Colour Fastness)	-	500	-
Cl-6.6 (Cl-7.2 of IS 8156)(Strength of Tapes)	-	500	-
Cl-6.6 (Cl-7.3 of IS 8156)(Shrinkage)	-	800	-
Cl-6.6 (Cl-7.4 of IS 8156)(Endurance Test)	-	800	-
Cl-6.6 (Cl-7.5 of IS 8156)(Dot Tear Test)	-	500	-
Cl-6.7 (Cl-4.1 of IS 9686)(Length)	-	300	-
Cl-6.7 (Cl-4.3 of IS 9686)(Thickness)	-	300	-
Cl-6.7 (Cl-4.4 of IS 9686)(Stretch Tests)	-	300	-
Cl-6.7 (Cl-4.4.1.1 of IS 9686)(Before Ageing- Extension)	-	800	-
Cl-6.7 (Cl-4.4.1.2 of IS 9686)(Before Ageing- Limit of useful extension)	-	800	-
Cl-6.7 (Cl-4.4.1.3 of IS 9686)(Before Ageing-Tension decay under constant stretch)	-	800	-
Cl-6.7 (Cl-4.4.1.4 of IS 9686)(Before Ageing-Fatigue test)	-	800	-
Cl-6.7 (Cl-4.4.2.1 of IS 9686)(After Accelerated Ageing- Extension)	-	800	-
Cl-6.7 (Cl-4.4.2.2 of IS 9686)(After Accelerated Ageing- Tension decay under constant stretch)	-	800	-
Cl-6.7 (Cl-4.4.2.3 of IS 9686)(After Accelerated Ageing- Fatigue test)	-	800	-
Cl-6.7 (Cl-4.5 of IS 9686)("Colour Fastness a-light ")	-	1500	-
Cl-6.7 (Cl-4.5 of IS 9686)("Colour Fastness b-washing")	-	1000	-
Cl-6.8 (Cl-10.2 , Table-4 (i) of IS 14181 (Part-1)(Security of interlocking of textile chain to lateral load or cross-wise strength of textile chain with 25 mm length in grip)	-	500	-
Cl-6.8 (Cl-10.2 , Table-4 (ii) of IS 14181 (Part-1)(Fold over security of textile chain (for both obverse and reverse fold))	-	500	-
Cl-6.8 (Cl-10.2 , Table-4 (iii) of IS 14181 (Part-1)(Security of attachment of top stop (all types))	-	500	-
Cl-6.8 (Cl-10.2 , Table-4 (iv) of IS 14181 (Part-1)(Security of attachment of bottom stop)	-	500	-
Cl-6.8 (Cl-10.2 , Table-4 (v) of IS 14181 (Part-1)(Security of attachment of retainer to longitudinal load (open-end fasteners))	-	500	-
Cl-6.8 (Cl-10.2 , Table-4 (vi) of IS 14181 (Part-1)(Security of attachment of retainer to lateral load (open end fasteners))	-	500	-
Cl-6.8 (Cl-10.2 , Table-4 (vii) of IS 14181 (Part-1)(Security of attachment of puller to slider)	-	500	-
Cl-6.8 (Cl-10.2 , Table-4 (viii) of IS 14181 (Part-1)(Security of slider lock holding)	-	500	-
Cl-6.8 (Cl-10.3, Table-5 (i) of IS 14181 (Part-1)(Reciprocating movement of slider under load)	-	500	-
Cl-6.8 (Cl-10.3, Table-5 (iv) of IS 14181 (Part-1)(Remeshability of fastener)	-	500	-
Cl-6.8 (Cl-10.4, Table-6 (i) of IS 14181 (Part-1)(Light)	-	1500	-
Cl-6.8 (Cl-10.4, Table-6 (ii) of IS 14181 (Part-1)(Perspiration)	-	1000	-
Cl-6.8 (Cl-10.4, Table-6 (iii) of IS 14181 (Part-1)(Sea water)	-	800	-
Cl-6.8 (Cl-10.4, Table-6 (iv) of IS 14181 (Part-1)(Washing)	-	1000	-
Cl-6.8 (Cl-10.4, Table-6 (v) of IS 14181 (Part-1)(Organic solvents)	-	800	-

15 Apr, 2027

-
included w.e.f.21.10.2024 Exclusion Cl-6.8 (Cl-10.3, Table-5 (ii) of IS 14181 (Part-1) (Resistance to abrasion Under load (cycles)) Cl-6.8 (Cl-10.3, Table-5 (iii) of IS 14181 (Part-1) (Resistance to heat under load)

9085

Ahmedabad Textile Industry's Research Association (ATIRA), Ahmedabad

7173002

IS 17358 : Part 1 (2020)

Agro textiles “ Fencing nets for agriculture and horticulture purposes “ Specification Part 1 Fencing nets made from extruded polymer mesh

18210 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5,/ 5.1( MANUFACTURE (a)Hexagonal shape (see Fig. 1);(b) Diamond shape (see Fig. 2); and c) Square shape (see Fig. 3))	-	200	-
5.2(Colour)	-	200	-
6.0(TYPES ,(a)Light duty, b) Medium duty, and c) Heavy duty.)	-	0	-
7.0( REQUIREMENTS)	-	0	-
5,/ 5.1( MANUFACTURE (a)Hexagonal shape (see Fig. 1);(b) Diamond shape (see Fig. 2); and c) Square shape (see Fig. 3))	-	0	-
5.2(Colour)	-	0	-
6.0(TYPES ,(a)Light duty, b) Medium duty, and c) Heavy duty.)	-	0	-
7.0( REQUIREMENTS)	-	0	-
Cl. 5, 5.1(Shape of Net)	-	0	-
5.2(Colour)	-	0	-
6(Types)	-	0	-
Cl. 4 & 7, Table-1(Light Duty Fencing Net (Hexagonal Shape) :)	-	0	-
(i)(Mass)	-	450	-
(ii)(Mesh Size, Traverse Direction)	-	550	-
(iii)(Mesh Size, Cross Direction)	-	550	-
(iv)(Thickness at joint)	-	450	-
(v)(Filament Thickness)	-	450	-
(vi)(Dimensions:)	-	0	-
(vi)(Length)	-	300	-
(vi)(Width)	-	300	-
(vii) a(Tensile Strength before UV exposure, Machine Direction)	-	900	-
(vii) b(Tensile Strength before UV exposure, Traverse Direction)	-	0	-
(viii) a(Elongation before UV exposure, Machine Direction)	-	0	-
(viii) b(Elongation before UV exposure, Traverse Direction)	-	0	-
(ix) a(Tensile Strength after UV exposure, Machine Direction)	-	13860	-
(ix) b(Tensile Strength after UV exposure, Traverse Direction)	-	0	-

-
-

9086

BIS, Eastern Regional Laboratory (ERL)

None

IS 5557 : Part 2 (2018)

All rubber gum boots and ankle boots: Part 2 occupational purposes

For all Type and Variety

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 (Type & varity)	-
7.1.1 (Tear strength)	-
7.1.2 (Abrasion resistance)	-
7.5.1 (Tensile)	-
7.5.3 (Flexing Resistance)	-
7.6.1 (Out sole thickness)	-
7.6.3 (out sole abrasion)	-
7.6.4 (out sole flexing)	-
7.6.5 (Interlayer bond strength)	-
7.7.1 (Insock thickness)	-
7.7.2 (Insock abrasion)	-
8.2 (Leak proofness)	-
8.1 (Hot contact)	-
8.3 (Height of upper)	-
8.4 (Adhesion test)	-
7.3 (Thread for upper closing - sulphur test)	-

-
Mech- Complete Chem- Except permeation test

9087

Delta Testing and Research Laboratories Private Limited (C5)

9179506

IS 12786 (2024)

Irrigation equipment - Polyethylene pipes for irrigation laterals - Specification (first revision)

All Grade / Type / Size / Designation

14500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(Material)	-	5000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-4.2(Carbon content of finished PE lateral pipe)	-	2000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-5.1(Dimensions of pipes and wall thicknesses)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-6.0(Visual Appearance)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-7.1(Hydraulic Characteristics- Internal pressure creep rupture test)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-7.1(Hydraulic Characteristics- quality acceptance test)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-7.2(Reversion Test)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-7.3(Tensile Test)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-7.3.1(Test Piece)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-7.3.2(Procedure)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-7.4(Susceptibility to Environmental Stress Cracking)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-8.0(Supply of pipes)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-9.0(Coiling)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-10.0(Sampling and criteria for conformity)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-11(Marking)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3(Class of Pipe)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1 & Table 1(Dimensions of Pipes - Outside diameters)	-	300	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1 & Table 1(Dimensions of Pipes - Wall thickness)	-	300	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6(Visual Appearance)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1 & Table 2(Hydraulic Characteristics)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1 & Table 2(Hydraulic Characteristics)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.2(Reversion Test)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.3(Tensile Strength)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.3(Elongation at Break)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.4(SusceptibiIity to Environmental Stress Cracking)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.2(a)(Carbon Black Content-IS 2530)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.2(b)(Carbon Black Dispersion-IS 2530)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

21 Aug, 2027

-
Included w.e.f 27.11.2024

9088

Ahmedabad Textile Industry's Research Association (ATIRA), Ahmedabad

7173002

IS 17358 : Part 2 (2020)

Agro textiles â€“ Fencing nets for agriculture and horticulture purposes â€“ Specification Part 2 Fencing nets made from mono filament yarns and combination of tape and mono filament yarns

25010 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause No. 4.1(HDPE Monofilament density)	-	500	-
Clause No. 4.1.1(Heat Shrinkage of the Monofilament Yarn at 60 and 95℃)	-	2000	-
Clause No. 4.2(Width of the tape used in fabric)	-	200	-
Clause No. 4.2(Density of the tape)	-	500	-
Clause No. 4.2.1(Heat Shrinkage of the tape at 60 and 95℃)	-	2000	-
Clause No. 5.1(Width of the Fabric)	-	200	-
Clause No. 5.2.1(Eyelet to Eyelet Edge Distance)	-	200	-
Clause No. 6(Mass of the fencing nets)	-	0	-
Clause 7.1(Dimensions)	-	600	-
Clause 7.2 (i)(Mass g/m²)	-	450	-
Clause 7.2 (ii)(Average breaking strength of wind shield net fabric (Strip method, 325×50 mm test piece with gauge length of 200 mm))	-	900	-
Clause 7.2 (iii)(Retention of breaking strength after UV exposure of 144 h)	-	13860	-
Clause 7.2 (iv)(Colour fastness to artificial light)	-	1650	-
Clause 7.2 (v)(Bursting pressure, kgf/cm2)	-	800	-
4.1(MATERIALS - HDPE Monofilament)	-	0	-
4.2(MATERIALS - HDPE Tapes)	-	0	-
5.1(MANUFACTURE - Fabric)	-	200	Tape width
5.2(MANUFACTURE - Eyelet)	-	550	eyelet to eyelet distance across length + length of eyelet + number of ply
5.3(MANUFACTURE - Colour)	-	200	-
6(TYPES of e fencing nets - a) Type 1 b) Type 2)	-	200	-
7.1(REQUIREMENTS - Dimensions and Mass)	-	0	-
7.2-Table 1- i)(REQUIREMENTS - Mass g/m2)	-	0	-
7.2-Table 1- ii)(REQUIREMENTS - Average breaking strength of fencing net fabric (strip method, 325×50 mm test piece with gauge length of 200 mm), N a) Warpway b) Weftway As per IS 1969 (Part 1))	-	0	-
7.2-Table 1- iii)(REQUIREMENTS - Retention of breaking strength after UV exposure of 144 h, percent)	-	0	-
7.2-Table 1- iv)(REQUIREMENTS - Colour fastness to artificial light)	-	0	-
7.2-Table 1- v)(REQUIREMENTS - Bursting pressure, kgf/cm2)	-	0	-

-
Included w.e.f 12.03.2025 Exclusion: Clause 8.1 (Length of the fencing nets)

9089

Central Institute of Petrochemical Engineering and Technology (CIPET), Guwahati

5117534

IS 4984 (2016)

Polyethylene pipes for water supply - Specification (Fifth Revision)

upto DN 315 mm

49275 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2(Polyethylene Resin)	-	5825	-
6.2.1(6.1.1 Identification Stripes)	-	250	-
7.2(Length)	-	0.0	-
Cl-7.4(Mean Outside Diameter (For upto 50 mm take 8 reading, above 50mm take 6 reading & average will be reported))	-	800	ovality & visual appearance charges are inclusive
7.4.1.2(Ovality)	-	0.0	-
8.1.2 table -5(Internal Pressure Creep Rupture Test of Pipe Joints)	-	1600	-
8,/8.1/8.1.1 table-5(PERFORMANCE REQUIREMENTS / Hydraulic Characteristics/ Internal Pressure Creep Rupture Test of Pipe)	-	21400	-
8.2(Longitudinal Reversion Test)	-	900	-
8.3(Carbon black)	-	1625	CBC & CBD ARE INCLUSIVE
8.4( Melt Flow Rate)	-	1100	-
8.5 (Oxidation Induction Time)	-	2200	-
8.7(Density)	-	500	-
8.8(Tensile Strength for Butt-fusion)	-	1600	-
8.9 table-6(Elongation at Break)	-	1600	-
8.10(Slow Crack Growth Rate)	-	6000	-
5.3 (a)(Carbon Black Master Batch)	-	925	-
5.3(d)(Carbon Black Master Batch)	-	950	-
6.2(Colour)	-	250	identification of stripes charges are inclusive
8.6(Overall migration)	-	2000	-

-
-

9090

HT Product Services Private Limited, Noida

8175006

IS 16103 : Part 1 (2012)

Led modules for general lighting: Part 1 safety requirements

For DC up to 250 V and AC up to 1000 V

31500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	1000	-
8(Terminals)	-	2000	-
9(PROVISION FOR EARTHING)	-	3000	-
10(Protection against accidental contact with live parts)	-	3000	-
11(Mositure Resistance and Insulation)	-	4000	-
12(Electric Strength)	-	3500	-
13(Fault conditions)	-	2000	-
15(Construction)	-	2000	-
16(Creepage distance and clearances)	-	2000	-
17(Screws, current carrying parts and connections)	-	2000	-
18(Resistance to heat, fire and tracking)	-	3000	-
19(Resistance to corrosion)	-	2000	-
21(Heat management)	-	1000	-

03 Dec, 2026

-
Included w.e.f 07.05.2024

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number