BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

11247 Results

S.No.

Lab Name

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

9121

CIPET: CENTRE FOR SKILLING AND TECHNICAL SUPPORT (CSTS) - AURANGABAD

IS 11584 (1986)

Specification for high density polyethylene (Hdpe) crates for milk satchets

10050 View breakup
Rs. 10050/-, For BIS Samples Rs. 7838/- .

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.2(Material )	-	1050	Material Identification (Chemical Analysis)
2.3(Shape and Dimensions)	-	500	Shape & Dimensions
2.4(Mass )	-	300	Mass
2.5(Appearance and Surface Finish)	-	300	Appearance & surface finish
2.7(Resistance to Stress)	-	1000	Resistance to Stress ( 80°C for 6 hrs)
2.8(Resistance to Applied Load)	-	999.95	Resistance to applied load (100 hrs/270°C)
2.9(Strength)	-	2200	Resistance to drop, Resistance to low temperature drop (6hrs/5°C) (6 x200)
2.1(Dimensional Stability)	-	900	Dimensional stability (80 °C/30 min)

Complete

31 Dec, 2026

-
-

9122

BIS, Central Laboratory (CL)

IS 2835 (1987)

Specification for flat transparent sheet glass (Third Revision)

Rs 525/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (CLASSIFICATION)	-
4.1.1 (Material)	-
4.2-Table 1 & Cl 5.1 (Thickness )	-
4.2-Table 1 (Length )	-
4.2-Table 1 (Width)	-
4.3-Table 2-i (Gaseous inclusion)	-
4.3-Table 2-ii (Opaque gaseous inclusion)	-
4.3-Table 2-iii (Knots, dirts and stones)	-
4.3-Table 2-iv & Cl 5.2 (Scratches, rubs and crush)	-
4.3-Table 2-v & Cl 5.3 (Bow)	-
4.3-Table 2-vi & Cl 5.4 (Reams, Light Strings and lines)	-
4.1 (Material)	-
4.3-Table 2-vii (Waviness)	-
4.3-Table 2-viii (Sulphur stains)	-
4.3-Table 2-ix (Corner breakage and chip)	-
4.3.1-Table 2A-i (Allowable Cluster of Defects for AA Quality at Central area)	-
4.3.1-Table 2A-i (Allowable Cluster of Defects for AA Quality at Outer area)	-
4.3.1-Table 2A-ii (Allowable Cluster of Defects for A Quality at Central area)	-
4.3.1-Table 2A-ii (Allowable Cluster of Defects for A Quality at Outer area)	-
4.3.1-Table 2A-iii (Allowable Cluster of Defects for B Quality at Central area)	-
4.3.1-Table 2A-iii (Allowable Cluster of Defects for B Quality at Outer area)	-

Partial

-
-

9123

Eurofins Analytical Services India Private Limited

IS 12299 (2021)

DAIRY WHITENER - SPECIFICATION First Revision

8650 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.6 Table 1 i)(Moisture)	-	500	-
5.6 Table 1 ii)(Milk Solids (non-fat))	-	900	-
5.6 Table 1 iii)(Insolubility Index)	-	900	-
5.6 Table 1 iv)(Total Ash (on dry basis))	-	900	-
5.6 Table 1 v)(Milk Fat)	-	900	-
5.6 Table 1 vi)(Acid Insoluble ash)	-	900	-
5.6 Table 1 vii)(Total added sugar)	-	900	-
5.5.1(Bacterial Count)	-	600	-
5.5.2(Coliform Count)	-	600	-
5.5.3(Salmonella)	-	900	-
Table 6.4/clause no(i)( Moisture)	-	600	-
Table 6.4/clause no(iv)(Insolubility index)	-	600	-
Table 6.4/clause no(v)(Total ash )	-	600	-
Table 6.4/clause no(ii)( Milk fat)	-	600	-
Table 6.4/clause no(vi)(Acid insoluble ash)	-	650	-
Table 6.4/clause no(vii)(Total added sugar)	-	650	-
Table 2 /clause no 6.4 SI.No.i)(Aerobic Plate count)	-	600	-
Table 2 /clause no 6.4 SI.No.i)( coliform count)	-	800	-
Table 2 /clause no 6.4 SI.No.i)(Salmonella spp.)	-	800	-
Table 6.4/clause no(viii)(Titrable acidity)	-	700	-
Table 6.4/clause no(iii)(Milk protein)	-	700	-
Table 2 /clause no 6.4 SI.No.i)(S.aureus)	-	800	-
Table 2 /clause no 6.4 SI.No.i)(Yeast & Mould count)	-	800	-
Table 2 /clause no 6.4 SI.No.i)(Listeria monocytogenes)	-	800	-
Table 2 /clause no 6.4 SI.No.i)(Bacillus cereus)	-	800	-
Table 2 /clause no 6.4 SI.No.i)(Sulphite reducing clostridia)	-	800	-
Table 2 /clause no 6.4 SI.No.i)(E.coli)	-	600	-

Complete

14 Mar, 2028

-
-

9124

CIPET: CENTRE FOR SKILLING AND TECHNICAL SUPPORT (CSTS) - AURANGABAD

IS 10889 (2004)

High density polyethylene films (First Revision)

7675 View breakup
For Black Films : Rs. 7,675/-, For BIS Samples Rs. 5,756/-; For Black Compound : Rs. 3,850/- , For BIS Samples Rs. 3,044/-; For Natural Films : Rs. 6,050/-, For BIS Samples Rs. 4,538/-; For Natural Compound : Rs. 2,225/- , For BIS Samples Rs. 1,825/

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.0(Grades)	-	300	Grade
5.1(Materials)	-	300	Material
5.2(Black Compound)	-	925	Carbon black Content
6.1.1(Appearance)	-	300	Appearance
6.1.2(Film Form)	-	299.95	Film form
6.1.3(Odour )	-	300	odour
6.1.4(Density)	-	500	Density
6.1.5(Melt Flow Rate)	-	1100	Melt Flow Rate
6.1.6(Black Film)	-	700	Carbon black Dispersion
6.2.1, Table 1(Nominal Thickness)	-	250	Thickness
6.2.1, Table 1(Tolerance, Percent Grade 1 and 2)	-	250	Tolerence
6.2.2, Table 2(Nominal Width)	-	250	Width
6.2.2, Table 2(Tolerance, Percent Grade 1 and 2)	-	250	Tlerance
6.3, Table 3(Yield Tolerance)	-	600	Yield tolerance
6.3, Table 3(Tolerance, Percent Grade 1 and 2)	-	250	Tolerance
6.4.1(Tensile Strength at Break)	-	2200	(a) Machine Direction (b) Transverse Direction
6.4.1, Table 4(Direction)	-	1100	Direction
6.4.1, Table 4(Grade 1 and 2)	-	300	Grade
6.4.2(Elongation at Break)	-	2200	Machine Direction Transverse Direction
6.4.2, Table 5(Direction)	-	1100	Direction
6.4.2, Table 5(Elongation at Break, Percent Grade 1 and 2)	-	2200	Machine Direction Transverse Direction
6.4.3(Impact Resistance (Falling Dart))	-	850	Impact Resistance (Falling Dart)
6.4.3, Table 6(Average Thickness of Film)	-	250	Thickness
6.4.3, Table 6(Impact Failure Load)	-	850	Impact failure load

Complete

31 Dec, 2026

-
-

9125

CIPET: CENTRE FOR SKILLING AND TECHNICAL SUPPORT (CSTS) - AURANGABAD

IS 7834 : Part 8 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 8 Specific requirements for caps

7514 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.1(General)	-	5125	Stress Relief test Opacity Effect on water test Short term Hydraulic test (27 °C/1h.)
2.2(Manufacture)	-	500	-
2.2.2(diameter of the socket of cap)	-	500	-
2.1(General)	-	500	-
2.2(Manufacture)	-	500	-
2.2.2(diameter of the socket of cap)	-	500	-
6.1.1(VCM Content Test)	-	3000	-
2.2.2 table 1(Laying length)	-	500	-
6.1.1(VCM Content Test)	-	3000	-
2.2.2 table 1(Laying length)	-	500	-
6.1.1(VCM Content Test)	-	3000	-
2.2.2 table 1(Laying length)	-	500	-

Complete

31 Dec, 2026

-
-

9126

CIPET: CENTRE FOR SKILLING AND TECHNICAL SUPPORT (CSTS) - AURANGABAD

IS 7834 : Part 7 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 7 Specific requirements for unions

7514 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
table 1 sl.no: 01(16 )	-	500	Minimum Thickness
table 1 sl.no: 07(63 )	-	500	Minimum Thickness
2.2.3(Socket length)	-	50	Socket length & diameter at Mid point of socket length
2.1(General)	-	5125	Stress Relief test Opacity Effect on water test Short term Hydraulic test (27 °C/1h.)

Complete

31 Dec, 2026

-
-

9127

CIPET: CENTRE FOR SKILLING AND TECHNICAL SUPPORT (CSTS) - AURANGABAD

IS 7834 : Part 6 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 6 Specific requirements for sockets

7514 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
table 1 sl.no: 01(16 )	-	500	Minimum Thickness
table 1 sl.no: 19(315.0)	-	500	Minimum Thickness
2.2.3( inside diameter of the socket)	-	500	Socket length & diameter at Mid point of socket length
2.1(General)	-	5126	Stress Relief test Opacity Effect on water test Short term Hydraulic test (27 °C/1h.)

Complete

31 Dec, 2026

-
-

9128

CIPET: CENTRE FOR SKILLING AND TECHNICAL SUPPORT (CSTS) - AURANGABAD

IS 7834 : Part 5 (1987)

Injection Moulded PVC Socket Fittings With Solvent Cement Joints for Water Supplies - Part 5 : Specific Requirements for 45 degree Tees

7514 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
table 1 sl.no: 01(16 (Z) )	-	500	Minimum Thickness
table 1 sl.no: 13(160(z1))	-	500	Minimum Thickness
2.2.3( inside diameter of the socket)	-	500	Socket length & diameter at Mid point of socket length
2.1(General)	-	5125	Stress Relief test Opacity Effect on water test Short term Hydraulic test (27 °C/1h.)
table 1 sl.no: 02(20 (Z) )	-	500	-
table 1 sl.no: 03(25 (Z) )	-	500	-
table 1 sl.no: 04(32 (Z) )	-	500	-
table 1 sl.no: 05(40 (Z) )	-	500	-
table 1 sl.no: 06(50 (Z) )	-	500	-
table 1 sl.no: 07(63 (Z) )	-	500	-
table 1 sl.no: 08(75 (Z) )	-	500	-
table 1 sl.no: 09(90 (Z) )	-	500	-
table 1 sl.no: 10(110 (Z) )	-	500	-
table 1 sl.no: 11(125 (Z) )	-	500	-
table 1 sl.no: 12(140 (Z) )	-	500	-
table 1 sl.no: 13(160(z))	-	500	-
table 1 sl.no: 01(16 (Z1) )	-	500	-
table 1 sl.no: 02(20 (Z1) )	-	500	-
table 1 sl.no: 03(25 (Z1) )	-	500	-
table 1 sl.no: 04(32 (Z1) )	-	500	-
table 1 sl.no: 05(40 (Z1) )	-	500	-
table 1 sl.no: 06(50 (Z1) )	-	500	-
table 1 sl.no: 07(63 (Z1) )	-	500	-
table 1 sl.no: 08(75 (Z1) )	-	500	-
table 1 sl.no: 09(90 (Z) )	-	500	-
table 1 sl.no: 10(110 (Z1) )	-	500	-
table 1 sl.no: 11(125 (Z1) )	-	500	-
table 1 sl.no: 12(140 (Z1) )	-	500	-
2.2.2, Table 1(Size)	-	500	-
2.2.2, Table 1(45 ̊ Tees Laying Length, Z)	-	500	-
2.2.2, Table 1(45 ̊ Tees Laying Length, Z1)	-	500	-
2.2.3(Socket length)	-	500	-
2.2(Manufacture)	-	500	-
2.2.2, Table 1(Size)	-	500	-
2.2.2, Table 1(45 ̊ Tees Laying Length, Z)	-	500	-
2.2.2, Table 1(45 ̊ Tees Laying Length, Z1)	-	500	-
2.2.3( inside diameter of the socket)	-	500	-
2.2.3(Socket length)	-	500	-
6.1.1(VCM Content Test)	-	3000	-
2.2.2 table 1(Laying length)	-	500	-
2.1(General)	-	500	-
2.2(Manufacture)	-	500	-
6.1.1(VCM Content Test)	-	3000	-
2.2.2 table 1(Laying length)	-	500	-

Complete

31 Dec, 2026

-
-

9129

CIPET: CENTRE FOR SKILLING AND TECHNICAL SUPPORT (CSTS) - AURANGABAD

IS 7834 : Part 4 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 4 Specific requirements for 90 degree tees

7514 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
table 1 sl.no: 01(16 )	-	500	Minimum Thickness
table 1 sl.no: 19(315.0)	-	500	Minimum Thickness
2.2.3( inside diameter of the socket)	-	500	Socket length & diameter at Mid point of socket length
2.1(General)	-	5125	Stress Relief test Opacity Effect on water test Short term Hydraulic test (27 °C/1h.)

Complete

31 Dec, 2026

-
-

9130

BIS, Southern Regional Laboratory (SRL)

IS 3196 : Part 1 (2013)

Welded low carbon steel cylinders exceeding 5 litres water capacity for low pressure liquefiable gases: Part 1 cylinders for liquefied petroleum gases (Lpg) - Specification (Sixth Revision)

- View breakup
Rs. 14900/- for 3 Pc. Cylinder & Rs. 10900/- for 2 Pc. Cylinder. (Excluding Radiographic and Fatigue Test) Rs. 2760 /- for Fatigue Test. And Material testing charges as per relevant referred ISs to be levied additionally

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
20 (Marking)	-
9 (Valve Protection)	-
10 (Foot Ring)	-
14 (Bung)	-
14 (Water Capacity)	-
15 (Hydrostatic Test)	-
16 (Pneumatic Leakage Test)	-
17 (Burst Test under Hydraulic Pressure)	-
18 (Parent Metal Longitudinal Tensile Strength)	-
18 (Parent Metal Circumferential Tensile Strength)	-
18 (Weld Metal Tensile Strength)	-
18 (Root Bend Test)	-
18 (Face Bend Test)	-
18 (Macro Examination)	-
18 (Minimum Thickness Test)	-
21 (Colour Identification)	-
23.2 (Protective Coatings)	-
10.0 (Handle)	-

Partial

-
" 2 nos +3 nos. for fatigue " Excluding Except Material test & Radiographic test all tests are available and prepared test piece is needed for acceptance test

9131

CIPET: CENTRE FOR SKILLING AND TECHNICAL SUPPORT (CSTS) - AURANGABAD

IS 7834 : Part 2 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 2 Specific requirements for 45 degrees elbows

7514 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
table 1 sl.no: 01(16 )	-	500	Minimum Thickness
table 1 sl.no: 19(315.0)	-	500	Minimum Thickness
2.2.3( inside diameter of the socket)	-	500	Socket length & diameter at Mid point of socket length
2.1(General)	-	5125	Stress Relief test Opacity Effect on water test Short term Hydraulic test (27 °C/1h.)

Complete

31 Dec, 2026

-
-

9132

BIS, Central Laboratory (CL)

IS 7079 (2008)

Automotive vehicles - Brake hose assemblies forhydraulicbraking systems used with non - Petroleum base brake fluid specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.9 (Tensile Test-Separation rate 25 ± 3 mm/min(This test need not be carried out if it has been carried out as part of test described in 5.10.))	-
5.9 (Tensile Test-Separation rate 50 ± 3 mm/min.(This test need not be carried out if it has been carried out as part of test described in 5.10.))	-
4.2.1 (Construction-Lining)	-
4.2.2 (Construction-Reinforcement and Reinforcement Plies)	-
4.2.3 (Construction-Cover)	-
5.3 (Visual Test)	-
5.6 (Pressure Test-Prior to dispatch each complete hose assembly shall be subjected to a pressure test using inert gas, air, water or brake fluid conforming to IS 8654 as the pressure medium. The test pressure shall be between 10.3 Mpa and 14.5 Mpa for inert gas and air, and between 20.7 Mpa and 24.8 Mpa for water and brake fluid.)	-
5.7, Table 4 (Bursting Strength Test-(Annex C).)	-

Complete

-
EXCLUDING -; Only Dimension test Avalible

9133

BIS, Central Laboratory (CL)

IS 5983 (1980)

Specification for eye - Protectors (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4/4.2 (DESIGN AND MANUFACTURE-Head-band)	-
3/3.1/3.1.1 (TYPES AND DESIGNATION-Types- Eye-Protector)	-
3/3.1/3.1.2 (TYPES AND DESIGNATION-Types- Oculars)	-
4/4.0 (DESIGN AND MANUFACTURE-General)	-
4/4.1 (DESIGN AND MANUFACTUREComfort to the Wearer)	-
4/4.3 (DESIGN AND MANUFACTURE-Fittings)	-
4/4.4 (DESIGN AND MANUFACTURE-Ventilation)	-
4/4.6 (DESIGN AND MANUFACTURE-Composition of Oculars (see 3.1.2))	-
5/5.1/5.1.1/5.1.1.1-Fig1 (REQUIREMENTS-General Requirements- Oculars-Dimensions)	-
5/5.1/5.1.1/5.1.1.4 (REQUIREMENTS-General Requirements- Oculars-Colour recognition)	-

Partial

-
-

9134

Eurofins Analytical Services India Private Limited

IS 14433 (2007)

Infant milk substitutes - Specification (First Revision)

49550 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Moisture)	-	500	-
6.1(Total ash)	-	900	-
6.1(Acid insoluble ash)	-	900	-
6.1(Total fat)	-	900	-
6.1(Milk fat)	-	900	-
6.1(Milk protein)	-	900	-
6.1(Insolubility index)	-	900	-
6.1(Solubility)	-	900	-
6.4(Scorched particles)	-	900	-
6.1(Chloride)	-	900	-
6.5(Vitamin E (for type 2 only))	-	2500	-
6.1(Vitamin A (as Retinol))	-	2500	-
6.1(Added Vitamin D (expressed as chole-calciferol))	-	4000	-
6.1(Thiamin)	-	2500	-
6.1(Niacin)	-	2500	-
6.1(Riboflavin)	-	2500	-
6.1(Vitamin B6)	-	4000	-
6.1(Vitamin B12)	-	4000	-
6.1(Folic acid)	-	4000	-
6.1(Pentothenic acid)	-	2500	-
6.1(Biotin )	-	3000	-
6.1(Vitamin C)	-	2500	-
6.1(Vitamin K)	-	4000	-
6.1(Choline)	-	4000	-
6.1(Vitamin E ( as alpha tocopherol compounds))	-	2500	-
6.1(Iron)	-	650	-
6.1(Lead)	-	650	-
6.1(Arsenic)	-	650	-
6.1(Tin)	-	650	-
6.1(Cadmium)	-	650	-
6.1(Calcium)	-	650	-
6.1(Phosphorus)	-	650	-
6.1(Iodine)	-	650	-
6.1(Copper)	-	650	-
6.1(Manganese)	-	650	-
6.1(Zinc)	-	650	-
6.1(Sodium)	-	650	-
6.1(Potassium)	-	650	-
6.1(Magnesium)	-	650	-
6.1(Selenium)	-	650	-
6.10.1(Calcium:phosphorus ratio)	-	650	-
6.10.1(Sodium, Potassium & Chloride)	-	650	-
6.9.1(Bacterial count)	-	600	-
6.9.2(Coliform count)	-	600	-
6.9.3(Escherichia coli)	-	600	-
6.9.4(Staphylococcus Aureus)	-	800	-
6.9.5(Salmonella and shigella)	-	800	-
6.9.6(Yeast and mould count)	-	800	-

Complete

14 Mar, 2028

-
-

9135

Eurofins Analytical Services India Private Limited

IS 1656 (2007)

Milk - Cereal based complementary foods - Specification (Fourth Revision)

22000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.8(Moisture)	-	550	-
5.8(Total Ash)	-	600	-
5.8(Acid insoluble ash)	-	600	-
5.8(Fat)	-	800	-
5.8(Total protein)	-	800	-
5.8(total Carbohydrates)	-	800	-
5.8(Crude Fibre(on dry basis))	-	800	-
5.8(Vitamin A (as Retinol))	-	2500	-
5.8(Vitamin C)	-	2500	-
5.8(Added vitamin D(expressed as cholecalciferol or ergocalciferol))	-	4000	-
5.8(Thiamine)	-	2500	-
5.8(Riboflavin)	-	2500	-
5.8(Niacin)	-	2500	-
5.8(Folic acid)	-	3000	-
5.8(Iron)	-	650	-
5.8(Zinc)	-	650	-
5.8(Copper)	-	650	-
5.8(Heavy metals, Lead)	-	650	-
5.8(Arsenic)	-	650	-
5.8(Tin)	-	650	-
5.8(Cadmium)	-	650	-
5.7.1(Bacterial count)	-	600	-
5.7.2(Coliform count)	-	600	-
5.7.3(Escherichia coli)	-	600	-
5.7.4(Staphylococcus aureus)	-	800	-
5.7.5(Salmonella and shigella)	-	800	-
5.7.6(Yeast and mould count)	-	800	-

Complete

14 Mar, 2028

-
-

9136

Testtex India Laboratories Private Limited

IS 9873 : Part 9 (2017)

Safety of Toys Part 9 Certain Phthalates Esters in Toys and Children's Products

All

4000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.0(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	4000	per material, Additional charges for different material applicable
3.0(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	4000	per material, Additional charges for different material applicable
3.0(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	4000	per material, Additional charges for different material applicable
3.0(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	4000	per material, Additional charges for different material applicable
3.0(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	4000	per material, Additional charges for different material applicable
3.0(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	4000	per material, Additional charges for different material applicable
3.0(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6)	-	4000	per material, Additional charges for different material applicable
3.0(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6)	-	4000	per material, Additional charges for different material applicable

Complete

31 Dec, 2026

-
Included w.e.f. 31-12-2020

9137

BIS, Central Laboratory (CL)

IS 14951 (2001)

Fire extinguisher - 145 litres capacity mechanical foam type - Specification

- View breakup
Rs.7300/- excluding Anti Corrosive treatment and expansion test and material testing charges as per respective Iss.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 3 (Capacity)	-
Cl 6 (Shape)	-
Cl 7.1 (General)	-
Cl 7.3 (Carrying Handle)	-
Cl 7.4 (Neck Ring)	-
Cl 7.5 (Cap)	-
Cl 7.6 (Snifter valve)	-
Cl 7.7 (Safety Pressure release valve)	-
Cl 7.8 (Liquid Level Indicator)	-
Cl 7.9 (Hose)	-
Cl 7.10 (Foam Making Branch & Other Discharge Fittings)	-
Cl 7.11 (Siphon Tube)	-
Cl 7.12 (Drain Plug)	-
Cl 7.13 (Wheeled Carriage)	-
Cl 8 (Charge)	-
Cl 10 (Painting)	-
Cl 11.1 (Discharge Test)	-

Partial

-
-

9138

BIS Patna Branch Laboratory (PBL)

IS 513 : Part 1 (2016)

Cold reduced carbon steel sheet and strip: Part 1 cold forming and drawing purpose (Sixth Revision)

Rs.8850/- Excluding Tensile Strain Hardening component View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 8.3 Table 6 (Hardness Test ( Only for CR0 & CR1))	-
Cl 9.5 (Workmanship)	-
Cl 9.6 (Workmanship)	-
Cl 10 (Workmanship)	-
7.0 (CARBON)	-
7.0 (SULPHUR)	-
7.0 (PHOSPHORUS)	-
7.0 (MANGANESE)	-
Cl. 11 (Width)	-
Cl. 11 (Thickness)	-
Cl 11 (Length, Width & Thickness)	-
Cl. 8.4 (Bend Test)	-
Cl. 8.1 & Table 5A, 5B & 5C (Yield Stress)	-
Cl. 8.1 & Table 5A, 5B & 5C (Elongation at 50 mm gauge length)	-
Cl. 8.1 & Table 5A, 5B & 5C (Elongation at 80 mm gauge length)	-
Cl 8 (UTM)	-

Partial

-
All test facilities are available as per the IS except- i. Cupping Test (Clause 8.2) ii. Plastic Strain Ratio (Clause 8.5) iii. Microalloying Elements (Clause 7.3)

9139

BIS Patna Branch Laboratory (PBL)

IS 4990 (2011)

Plywood for concrete shuttering works - Specification (Third Revision)

Rs 11950/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.0 (Types)	-
7.2 (DIMENSIONS & TOLERANCES )	-
7.2 (DIMENSIONS & TOLERANCES )	-
7.3 (DIMENSIONS & TOLERANCES )	-
7.4 (DIMENSIONS & TOLERANCES )	-
7.4 (DIMENSIONS & TOLERANCES )	-
8.1 (WORKMANSHIP AND FINISH )	-
8.3 (WORKMANSHIP AND FINISH )	-
10.1.1 (MOISTURE CONTENT)	-
10.1.2, 10.1.2.1 (Table-1) (GLUE ADHESION IN DRY STATE)	-
10.1.2, 10.1.2.2 (GLUE ADHESION IN DRY STATE)	-
10.1.3, 10.1.3.1.1 (Table-1) (RESISTANCE TO WATER TEST)	-
10.1.3, 10.1.3.1.2 (RESISTANCE TO WATER TEST)	-
10.1.4 (RESISTANCE TO WATER TEST)	-
10.1.5 (MYCOLOGICAL TEST )	-
10.1.5, 10.1.5.1 (Table-1) (MYCOLOGICAL TEST )	-
10.1.5.2 (MYCOLOGICAL TEST )	-
Cl. 10.1.6 (Cl. 10.1.6 (Tensile Strength: Parallel to grain))	-
Cl. 10.1.6 (Cl. 10.1.6 (Tensile Strength: Perpendicular to grain))	-
Cl. 10.1.6 (Cl. 10.1.6 (Tensile Strength: Sum of the Tensile Strength in two directions))	-
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Elasticity: Along the Face Grain: Average))	-
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Elasticity: Along the Face Grain: Minimum Individual))	-
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Elasticity: Across the Face Grain: Average))	-
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Elasticity: Across the Face Grain: Minimum Individual))	-
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Rupture: Along the Face Grain: Average))	-
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Rupture: Along the Face Grain: Minimum Individual))	-
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Rupture: Across the Face Grain: Average))	-
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Rupture: Across the Face Grain: Minimum Individual))	-
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Elasticity: Along the Face Grain: Average))	-
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Elasticity: Along the Face Grain: Minimum Individual))	-
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Elasticity: Across the Face Grain: Average))	-
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Elasticity: Across the Face Grain: Minimum Individual))	-
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Rupture: Along the Face Grain: Average))	-
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Rupture: Along the Face Grain: Minimum Individual))	-
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Rupture: Across the Face Grain: Average))	-
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Rupture: Across the Face Grain: Minimum Individual))	-
10.1.9(Chem) (RETENTION OF PRESERVATIVE)	-

Partial

-
All test facilities are available as per the IS

9140

BIS Patna Branch Laboratory (PBL)

IS 3601 (2006)

Steel tubes for mechanical and general engineering purposes - Specification (Second Revision)

- View breakup
Rs. 7370/- for Un-galvanized WT & HFS For galvanized tubes Rs. 1945/- extra Rs. 8060/- for CDS & CEW Material testing charges as per relevant referred ISs to be levied additionally

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 (Material)	-
6.0 (Workmanship)	-
4.1 (Sulphur-Percentage by mass)	-
4.1 (Phosphorus-Percentage by mass)	-
8.0 (Straightness)	-
19.1.1, 24.1.1, 28.1.1, 33.1.1 (Dimensions- Outside Dia)	-
19.1.2, 24.1.2, 28.1.2, 33.1.2 (Dimensions- Thickness)	-
11.1 (Surface Protection)	-
11.2 (Surface Protection)	-
19.1.3 (Height of Internal Fin)	-
13.1.3 (Tensile Strength)	-
13.1.1 (Yield Stress)	-
13.1.2 (Elongation)	-
13.3 (Bend Test (Strip))	-
13.4 (Bend Test (Whole Tube))	-
13.2 (Flattening Test)	-
13.5 (Drift Expansion Test)	-

Partial

-
All test facilities are available as per the IS except test for microalloying elements (Clause 4.2) Note: Sample size of 3m full length (two samples each of preferred size 1.5 m ) may be supplied for testing. *- The exact sample type, size and quantity may be ascertained from the latest product manual issued by BIS.

9141

BIS, Bengaluru Branch Laboratory (BNBL)

IS 14543 (2016)

Packaged drinking water (Other Than Packaged Natural Mineral Water) - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.3 (Description)	-
5.3 Table-1 i (Colour)	-
5.3 Table-1 ii (Odour)	-
5.3 Table-1 iii (Taste)	-
5.3 Table-1 iv (Turbidity)	-
5.3 Table-1 v (Total dissolved solids)	-
5.3 Table-1vi (pH)	-
5.3 Table-2 i (Barium (as Ba))	-
5.3 Table-2 ii (Copper (as Cu))	-
5.3 Table-2 iii (Iron (as Fe),)	-
5.3 Table-2 iv (Manganese (as Mn))	-
5.3 Table-2 v (Nitrate (as NO3))	-
5.3 Table-2 vi (Nitrite (as NO2))	-
5.3 Table-2vii (Fluoride (as F))	-
5.3 Table-2 viii (Zinc (as Zn))	-
5.3 Table-2 ix (Silver (as Ag))	-
5.3 Table-2 x (Aluminium (as Al))	-
5.3 Table-2 xi (Chloride (as Cl))	-
5.3 Table-2 xii (Selenium (as Se),)	-
5.3 Table-2 xiii (Sulphate (as SO4),)	-
5.3 Table-2 xiv (Alkaliniity (as HCO3))	-
5.3 Table-2 xv (Calcium (as Ca),)	-
5.3 Table-2 xvi (Magnesium (as Mg))	-
5.3 Table-2 xvii (Sodium (as Na))	-
5.3 Table-2 xviii (Residual free chlorine)	-
5.3 Table-2 xx (Mineral oil)	-
5.3 Table-2 xxii (Sulphide (as H2S))	-
5.3 Table-2 xxiii (Antimony (as Sb))	-
5.3 Table-3 ii (Cadmium (as Cd))	-
5.3 Table-3 iii (Arsenic (as As))	-
5.3 Table-3 v (Lead (as Pb))	-
5.3 Table-3 vi (Chromium (as Cr))	-
5.3 Table-3 vii (Nickel (as Ni))	-
5.2.9 (Vibrio parahaemolyticus)	-
5.2.9 (Vibrio cholera)	-
5.2.8 (Shigella)	-
5.2.8 (Salmonella)	-
5.2.7 (Yeast and Mould)	-
5.2.6 (Aerobic Microbial Count at 37°C)	-
5.2.6 (Aerobic Microbial Count at 20-22°C)	-
5.2.5 (Pseudomonas Aeruginosa)	-
5.2.4 (Sulphite Reducing Anaerobes)	-
5.2.3 (Staphylococcus Aureus)	-
5.2.3 (Faecal Streptococci)	-
5.2.2 (Coliform)	-
5.2.1 (Escherichia coli (or thermotolerant bacteria))	-
5.3 Table-2 xxv (Bromates (as BrO3),)	-
5.3 Table-3 i (Mercury (as Hg))	-
5.3 Table-2 xxiv (Borates (as B))	-
Table 3, x) (Uranium)	-
5.4 ii) (Total pesticied residue)	-
5.3 Table-3 ix (Polynuclear aromatic hydrocarbons)	-
5.3 Table-3 viii (Polychlorinated biphenyle (PCB))	-

Partial

-
Test facility not available for Cyanide, Anionic surface active agents, Phenolic compounds, Radio active residues.

9142

BIS Patna Branch Laboratory (PBL)

IS 1835 (1976)

Specification for round steel wire for ropes (Third Revision)

Rs 4500/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 12.2 (UTM)	-
Cl 10 (Diameter)	-
Cl 12.4 (Reverse Bend)	-
Cl 12.3 (Torsion)	-
Cl 12.5 (Wrap)	-
Cl. 5.1, T-1 (C)	-
Cl. 5.1, T-1 (Mn)	-
Cl. 5.1, T-1 (Si)	-
Cl. 5.1, T-1 ( Grade 1) (S)	-
Cl. 5.1, T-1 ( Grade 1) (P)	-
Cl. 9.1, T-3 (Uniformity)	-
Cl. 9.1, T-3 (Mass of Zinc Coating)	-

Partial

-
All test facilities are available as per the IS except tests for Copper, Nickel and Chromium (Clause 5.1)

9143

BIS Patna Branch Laboratory (PBL)

IS 1065 : Part 1 (2019)

Stable bleaching powder - Specification: Part 1 household and industrial use (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.2.1 (Description)	-
5.2 (Description)	-
5.3 Table-1 i (Available chlorine)	-
5.3 Table-1 ii (Stability, loss of Chlorine on the basis of initial available chlorine )	-
5.3 Table-1 iiii (Moisture, percent by mass. )	-
5.3 Table-1 iv (Particle size (Passing through 170 mm IS Sieve). Percent by mass)	-
Clause 5.4 (Keeping Quality )	-

Partial

-
All test facilities are available as per the IS

9144

BIS, Southern Regional Laboratory (SRL)

IS 5531 (2014)

Cast iron specials for asbestos cement pressure pipes for water and sewage - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 5 (WALL THICKNESS AND CLASSIFICATION)	-
Cl. 6.3 (Brinell Hardness Test)	-
Cl. 7 (HYDROSTATIC TEST)	-
Cl. 8 (SIZES)	-
Cl. 10.1 (Thickness)	-
Cl. 12 (COATING)	-

Partial

-
Excluding Hydrostatic test, material tests. Facility for preparation of test specimen not available.

9145

BIS, Central Laboratory (CL)

IS 8391 : Part 1 (2019)

Rubberized coir sheets for cushioning “ Specification Part 1 Curled (third revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.7.2 (Indentation Hardness, Annex D)	-
7.7.3 (Resistance to Ageing, Annex E)	-
7.7.4 (Resistance to Flexing, Annex F)	-
7.7.5 (Compression Set (Aged), Annex G)	-
7.7.6 (Compression Set (Un-aged), Annex G)	-
B-1 ( DETERMINATION OF LENGTH AND WIDTH, Annex B)	-
B-2.1 (DETERMINATION OF THICKNESS, Annex B )	-
B-2.2 (Determination of Thickness of the Whole Sample, Annex B)	-
6.1 (Shape)	-
6.2 (Dimensions)	-
7.2 (Indentation Hardness)	-
7.3 (Resistance to Ageing)	-
7.4 (Resistance to Flexing)	-
7.5 (Compression Set(Aged))	-
7.6 (Compression Set(Unaged))	-

Partial

-
EXCLUDING 7.4 Resistance to Flexing, 6.2 Dimension-Thicnkess of full Sheet;

9146

BIS Patna Branch Laboratory (PBL)

IS 15410 (2003)

Containers for packaging of natural mineral water and packaged drinking water - Specification

- View breakup
Total charges = Rs.5850.00 Testing charges for material shall be levied as per relevant ISS.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.6.2 (TRANSPARANCY)	-
4.2 (Design, Shape & Dimension )	-
4.3 (Workmanship, Finish & Appearance)	-
4.4 (b) (Brimful Capacity)	-
Cl. 4.5 (Cl. 4.5 Wall Thickness (Top))	-
Cl. 4.5 (Cl. 4.5 Wall Thickness (Middle))	-
Cl. 4.5 (Cl. 4.5 Wall Thickness (Bottom))	-
Cl. 4.6.3 ( Cl. 4.6.3 Closure Leakage)	-
Cl. 4.6.3 (Cl. 4.6.3 Vibration Leakage)	-
Cl. 4.6.3 (Cl. 4.6.3 Air Pressure Leakage)	-
4.6.4 (DROP TEST)	-
4.6.6 (PORTABILITY TEST)	-
Cl.4.6.7.2 and 4.6.7.3, Table 3, (ix) (Phthalic acid, bis(2-ethylhexyl) ester (DEHP))	-
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(i) (Specific migration for Cap,Barium)	-
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(ii) (Specific migration for Cap,Cobalt)	-
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(iii) (Specific migration for Cap,Copper)	-
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(iv) (Specific migration for Cap,Iron)	-
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(v) (Specific migration for Cap,Lithium)	-
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(vi) (Specific migration for Cap,Manganese)	-
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(vii) (Specific migration for Cap,Zinc)	-
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(viii) (Specific migration for Cap,Antimony)	-
Clauses 4.6.7.2 and 4.6.7.3 ,S.No(ix) ("Specific migration for Cap,Phthalic acid, bis(2-ethylhexyl) ester (DEHP)")	-
Cl. 4.6.5 (Overall migration for Cap)	-
Cl. 4.6.5.1 (Colour migration for Cap)	-
4.6.5 (MIGRATION TEST)	-
Cl. 4.6.5 (Cl. 4.6.5 Migration)	-

Partial

-
All test facilities are available as per the IS

9147

Eurofins Analytical Services India Private Limited

IS 1165 (2002)

Milk Powder (Bi-lingual)

4600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.4.5(Total solids)	-	900	-
3.4.5(Fat)	-	900	-
3.4.5(Total ash)	-	900	-
3.4.5(Moisture)	-	500	-
3.4.5(Titratable acidity (lactic acid))	-	900	-
3.4.5(Insolubility index)	-	900	-
3.5(Bacterial count)	-	600	-
3.5.2(Coliform count)	-	600	-
3.5.3(Staphylococcus Aureus)	-	800	-
3.5.4(Salmonella)	-	800	-
3.5.5(Shigella)	-	800	-
3.4.5(Moisture)	-	600	-
3.4.5(Fat)	-	800	-
3.4.5(Total ash)	-	600	-
3.4.5(Total solids)	-	600	-
3.4.5(Titratable acidity (lactic acid))	-	600	-
3.4.5(Insolubility index)	-	600	-
3.5(Bacterial count)	-	600	-
3.5.2(Coliform count)	-	600	-
3.5.3(Staphylococcus Aureus)	-	800	-
3.5.4(Salmonella)	-	800	-
3.5.5(Shigella)	-	800	-
3.2(Flavour and taste)	-	600	-
3.1(Description)	-	600	-

Complete

14 Mar, 2028

-
-

9148

BIS, Southern Regional Laboratory (SRL)

IS 10 : Part 3 (1974)

Plywood Tea-Chests: Part-3 Battens

Rs 600/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Dimensions)	-
4.2 (Tolerances)	-
6.0 (FINISHING)	-

Partial

-
" 12 nos. - 1set " Excluding Except SPECIES OF TIMBER, Requirements, Comression parallel to Grains, Static Bending

9149

BIS, Central Laboratory (CL)

IS 3196 : Part 1 (2013)

Welded low carbon steel cylinders exceeding 5 litres water capacity for low pressure liquefiable gases: Part 1 cylinders for liquefied petroleum gases (Lpg) - Specification (Sixth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
9 (Valve Protection)	-
10 (Foot Ring)	-
14 (Bung)	-
14 (Water Capacity)	-
15 (Hydrostatic Test)	-
16 (Pneumatic Leakage Test)	-
17 (Fatigue Test)	-
17 (Burst Test under Hydraulic Pressure)	-
18 (Parent Metal Longitudinal Tensile Strength)	-
18 (Parent Metal Circumferential Tensile Strength)	-
18 (Weld Metal Tensile Strength)	-
18 (Root Bend Test)	-
18 (Face Bend Test)	-
18 (Macro Examination)	-
18 (Minimum Thickness Test)	-
21 (Colour Identification)	-
23.2 (Protective Coatings)	-
23.2 (Protective coatings)	-

Partial

-
-

9150

BIS, Central Laboratory (CL)

IS 170 (2020)

Acetone — Specification ( Fifth Revision )

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl No 3.1 ( Description)	-
Cl No 3.2 (Miscibility with Water)	-
Cl 3.3 and 6.1 [ Table 1, Sl No. (ii) ] ref to IS 8768 (Colour)	-
Cl 3.3 and 6.1 [ Table 1, Sl No. (iii) ] ref to 6 of IS 82 (Relative density, at 27/27 °C)	-
Cl 3.3 and 6.1 [ Table 1, Sl No. (vi) ] ref to 8 of IS 82 (Residue on evaporation)	-
Cl 3.3 and 6.1 ANNEX C [ Table 1, Sl No. (vii) ] (Acidity (as CH3COOH),)	-
Cl 3.3 and 6.1 ANNEX D [ Table 1, Sl No. (viii) ] (Alkalinity)	-
Cl 3.3 and 6.1 ANNEX E [ Table 1, Sl No. (ix) ] (Permanganate test)	-
Cl 3.3 and 6.1 ANNEX F [ Table 1, Sl No. (x) ] (Alcoholic impurities)	-

Partial

-
EXCLUDING Water content , purity, methanol content, ethanol content, Acidity;

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number