BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15363 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

9151

MATERIAL TESTING LABORATORY LLP

8176306

IS 18573 (2024)

Cold formed welded carbon steel square and rectangular hollow sections for mechanical, general engineering and decorative purposes ï¿½ Specification

All Grade

16000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause. 3.0(Types)	-	0	-
Clause.4.0(Carbon)	-	500	-
Clause.4.0(Sulphur)	-	500	-
Clause.4.0(Phosphorus)	-	500	-
Clause.4.0(Silicon)	-	500	-
Clause.4.0(Manganese)	-	500	-
Clause.5.0(Supply of Material)	-	0	-
Clause.6.0(Workmanship)	-	500	-
Clause.7.0(Straightness)	-	1000	-
Clause.8.0(Basis of Calculation)	-	1000	-
Clause.9.0(Length)	-	1000	-
Clause.10.0(Dimensions and properties)	-	1000	-
Clause.11.0(General)	-	0	-
Clause.11.0(Outside Dimension)	-	1000	-
Clause.11.0(Thickness)	-	500	-
Clause.11.0(Concavity and Convexity)	-	1000	-
Clause.11.0(Squareness of Sides)	-	1000	-
Clause.11.0(External Corner Radiius)	-	1000	-
Clause.11.0(Straightness and twist)	-	1000	-
Clause.12.0(Dimension Tolerances)	-	1000	-
Clause.13.0(Surface Protection)	-	1000	-
Clause.14.0(Testing)	-	0	-
Clause.15.0(Tensile test)	-	500	-
Clause.15.0(Yield strength)	-	500	-
Clause.15.0(Elognation Percent)	-	500	-
Clause.18.0(Marking)	-	500	-
Clause.4.0(Sulphur)	-	500	-
Clause.5.0(Supply of Material)	-	0	-
Clause.10.0(Dimensions and properties)	-	1000	-
Clause.11.0(Thickness)	-	500	-
Clause.12.0(Dimension Tolerances)	-	1000	-

-
Included w.e.f. 28.08.2024

9152

Spectro SSA Labs Private Limited

7190106

IS 2185 : Part 3 (1984)

Concrete Masonry Units Part 3 Autoclaved Cellular Aerated Concrete Blocks

Grade 1 and Grade 2

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.2(Physical requirments-Dimensions-Length)	-	1000	-
8.2(Physical requirments-Dimensions-Height)	-	1000	-
8.2(Physical requirments-Dimensions-Width)	-	1000	-
8.3(Physical requirments- Block density)	-	2000	-
8.4(Physical requirments- Compressive strength)	-	3500	-
8.6( Drying Shrinkage )	-	2500	-
8.4, 9.2 & 11.3(Indivisual Moisture Content)	-	2000	-
8.4, 9.2 & 11.3(Indivisual Bulk density)	-	3500	-
8.4, 9.2 & 11.3 & Table 1(Indivisual Compressive strength)	-	3500	-
8.3 & 9.1(Indivisual Moisture Content)	-	2000	-
8.3 & 9.1 Table 1(Indivisual Block Density)	-	2000	-
3.2 & 8.2(Indivisual Height)	-	1000	-
3.2 & 8.2(Indivisual Width)	-	1000	-
8.6, 9.4 & 11.5(Grade)	-	0	Facility not Available
3.4(Special Faces)	-	0	Facility not Available
3.3(Faces & Arises)	-	0	Facility not Available
3.1(Shape)	-	0	Facility not Available
8.1.1(General (Exposed wall construction))	-	0	Facility not Available
5(MATERIALS)	-	0	Facility not Available
7(SURFACE TEXTURE AND FINISH)	-	0	Facility not Available
15(Marking)	-	0	Facility not Available
8(Physical requirments)	-	0	-
3.2 & 8.2(Indivisual Length)	-	1000	-
8.5(Thermal Conductivity)	-	0	-
9.3(Thermal Conductivity)	-	0	-

10 Nov, 2028

-
-

9153

NDL POWER LIMITED, ROHTAK

9182206

IS 16659 (2017)

Fluids for electrotechnical applications - Unused natural esters for transformers and similar electrical equipment

11000.0 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1-Table 1-i)(Appearance)	-	250.0	ok
4.1-Table 1-ii)(Viscosity at 100 °C)	-	500.0	ok
4.1-Table 1-iii)(Viscosity at 40 °C)	-	500.0	ok
4.1-Table 1-iv)(Pour point)	-	500.0	ok
4.1-Table 1-v)(Water content)	-	500.0	ok
4.1-Table 1-vi)(Density at 20 °C)	-	500.0	ok
4.1-Table 1-vii)(Breakdown voltage)	-	500.0	ok
4.1-Table 1-viii)(Dissipation factor (tan δ) 90 °C)	-	850.0	ok
4.1-Table 1-ix)(Soluble acidity)	-	500.0	ok
4.1-Table 1-x)(Corrosive sulfur DBDS)	-	3500.0	ok
4.1-Table 1-xi)(Total additives)	-	0.0	We are not having Proper Testing Facility
4.1-Table 1-xii)(Performance – Salient properties after oxidation stability test)	-	0.0	ok
4.1-Table 1-xiii)(Total acidity)	-	500.0	ok
4.1-Table 1-xiv)(Viscosity at 40 °C)	-	500.0	ok
4.1-Table 1-xv)(DDF (tan δ) at 90 °C)	-	850.0	ok
4.3.3(Relative permittivity (dielectric constant))	-	850.0	ok
4.1-Table 1-xvi)(Fire point Flash point)	-	500.0	ok

10 Nov, 2027

-
Biodegradation (Cl 4.1 Table 1-xvii), Total Additives (Cl 4.1 Table 1-xi)

9154

BIS, Central Laboratory (CL)

None

IS 302 : Part 2 : Sec 76 (1999)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 76 electric fence energizers

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.6.1 OF IS:302-1:2008 (Classification)	-
Cl.6.2 OF IS:302-1:2008 (Classification)	-
CL. 1.1 (VOLTAGE)	-
Cl.7 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7 (Marking and Instructions)	-
Cl.7 (Marking and Instructions)	-
Cl.7 (Marking and Instructions)	-
Cl.7.2 (Marking and Instructions)	-
Cl.7.3 (Marking and Instructions)	-
Cl.7.3 (Marking and Instructions)	-
Cl.7.3 (Marking and Instructions)	-
Cl.7.4 (Marking and Instructions)	-
Cl.7.5 (Marking and Instructions)	-
Cl.7.6 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7.8 of IS :302-1:2008 (Marking and Instructions)	-
Cl.7.9 of IS :302-1:2008 (Marking and Instructions)	-
Cl.7.10 of IS :302-1:2008 (Marking and Instructions)	-
Cl.7.11 of IS :302-1:2008 (Marking and Instructions)	-
Cl.7.12 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7.12 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7.12.1 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7.12.2 OF IS:302-1:2008 (Marking and Instructions)	-
Cl.7.12.3 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7.12.4 OF IS:302-1:2008 (Marking and Instructions)	-
Cl.7.12.5 OF IS:302-1:2008 (Marking and Instructions)	-
Cl.7.12.6 OF IS:302-1:2008 (Marking and Instructions)	-
Cl.7.12.7 OF IS:302-1:2008 (Marking and Instructions)	-
Cl.7.12.8 OF IS:302-1:2008 (Marking and Instructions)	-
Cl.7.13 of IS 302-1:2008 (Marking and Instructions)	-
Cl.7.14 of IS302-1:2008 (Marking and Instructions)	-
Cl.7.15 of IS 302-1:2008 (Marking and Instructions)	-
Cl.7.16 of IS 302-1:2008 (Marking and Instructions)	-
Cl.7.101 (Marking and Instructions)	-
Cl.7.102 (Marking and Instructions)	-
Cl.8.1 OF IS:302-1:2008 (Protection Against Access to Live Parts)	-
Cl.8.1.1 OF IS:302-1:2008 (Protection Against Access to Live Parts)	-
Cl.8.1.2 OF IS:302-1:2008 (Protection Against Access to Live Parts)	-
Cl.8.1.3 OF IS:302-1:2008 (Protection Against Access to Live Parts)	-
Cl.8.1.4 OF IS:302-1:2008 (Protection Against Access to Live Parts)	-
Cl.8.1.5 OF IS:302-1:2008 (Protection Against Access to Live Parts)	-
Cl.8.2 OF IS:302-1:2008 (Protection Against Access to Live Parts)	-
Cl.10.1 OF IS:302-1:2008 (Power Input and Current)	-
Cl.11.2 OF IS:302-1:2008 (Heating)	-
Cl.11.3 OF IS:302-1:2008 (Heating)	-
Cl.11.4 OF IS:302-1:2008 (Heating)	-
Cl.11.5 OF IS:302-1:2008 (Heating)	-
Cl.11.5 OF IS:302-1:2008 (Heating)	-
Cl.11.6 OF IS:302-1:2008 (Heating)	-
Cl.11.7 OF IS:302-1:2008 (Heating)	-
Cl.11.8 OF IS:302-1:2008 (Heating)	-
Cl.13.1 OF IS:302-1:2008 (Leakage Current & Electric Strength at operating temp.)	-
Cl.13.2 OF IS:302-1:2008 (Leakage Current & Electric Strength at operating temp.)	-
Cl.13.3 OF IS:302-1:2008 (Leakage Current & Electric Strength at operating temp.)	-
Cl.14.101 OF IS:302-1:2008 (TRANSIENT OVERVOLTAGE)	-
Cl.15 OF IS: 302-1:2008 (Moisture Resistance)	-
Cl.15.3 of IS 302-1:200 (Moisture Resistance)	-
Cl.16.1 OF IS:302-1:2008 (Leakage Current & Electric Strength)	-
Cl.16.2 OF IS:302-1:2008 (Leakage Current & Electric Strength)	-
Cl.16.3 OF IS:302-1:2008 (Leakage Current & Electric Strength)	-
Cl.16.101 OF IS:302-1:2008 (Leakage Current & Electric Strength)	-
Cl.16.102 OF IS:302-1:2008 (Leakage Current & Electric Strength)	-
Cl.18 (Endurance.)	-
Cl.19.1 OF IS:302-1:2008 (Abnormal Operation.)	-
Cl.19.11 OF IS:302-1:2008 (Abnormal Operation.)	-
Cl.19 OF IS:302-1:2008 (Abnormal Operation.)	-
Cl.19 OF IS:302-1:2008 (Abnormal Operation.)	-
Cl.19.101 (Abnormal Operation.)	-
Cl.19.102 (Abnormal Operation.)	-
Cl.19.103 (Abnormal Operation.)	-
Cl.19.105 (Abnormal Operation.)	-
Cl.19.106 (Abnormal Operation.)	-
Cl.21 & IS:302-1:2008) (Mechanical Strength.)	-
Cl.21.2 of IS 302-1:2008 (Mechanical Strength.)	-
Cl. 22.101 (Construction)	-
Cl. 22.102 (Construction)	-
Cl. 22.103 (Construction)	-
Cl. 22.104 (Construction)	-
Cl. 22.105 (Construction)	-
Cl. 22.106 (Construction)	-
Cl. 22.107 (Construction)	-
Cl. 22.108 (Construction)	-
Cl. 22.109 (Construction)	-
Cl.23.1 of IS:302-1:2008 (Internal Wiring)	-
Cl.24.1 of IS 302-1:2008 (Components)	-
Cl.25.1 -ADDITION (Supply Connection And External Flexible Cords)	-
Cl.25.4 of IS 302-1:2008 (Supply Connection And External Flexible Cords)	-
Cl.25.6 of IS 302-1:2008 (Supply Connection And External Flexible Cords)	-
Cl.26.101 (Terminals for external conductors)	-
Cl.26.102 (Terminals for external conductors)	-
Cl.26.103 (Terminals for external conductors)	-
Cl.27.1 of IS 302-1:2008 (Provision For Earthing)	-
Cl.28.1 of IS 302-1:2008 (Screws and connections)	-
CL.29 of IS 302-1:2008 ("Clearances, Creepage distances and solid insulation")	-
CL.30.1 of IS 302-1:2008 (Resistance to heat and fire)	-
CL.30.2 of IS 302-1:2008 (Resistance to heat and fire)	-
CL.31 of IS 302-1:2008 (Resistance to Rusting)	-
CL.32 of IS 302-1:2008 (Radiation, toxicity and similar hazards)	-

-
-

9155

BIS, Central Laboratory (CL)

None

IS 9997 (1991)

Aluminium alloy redraw rods for electrical purposes - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 6.1 (Silicon)	-
Cl.8 ("Electrical Resistivity Resistivity ")	-
Cl.9 (Dimension and permissible variation)	-
Cl.11 (Freedom from defects)	-

-
-

9156

Spectro SSA Labs Private Limited

7190106

IS 2185 : Part 1 (2005)

Concrete masonry units - Specification: Part 1 hollow and solid concrete blocks (Third Revision)

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.1(PHYSICAL REQUIREMENTS-General)	-	0	-
9.2 & 4.2(PHYSICAL REQUIREMENTS-Nominal Dimensions 1.Length 2.Hight 3. Width)	-	1000	-
9.2 & 4.2.3(Nominal Dimensions-variation in the length of units )	-	1000	-
9.2 & 4.2.3(Nominal Dimensions -variation in height and width of units )	-	1000	-
9.2 & 4.2.4, Table-1(Nominal Dimensions-thickness of the face shell)	-	1000	-
9.2 & 4.2.4, Table-1(Nominal Dimensions-thickness of the Web shell)	-	1000	-
9.3 & 5.1 & 5.2 Table 2(PHYSICAL REQUIREMENTS-Blocks Density - 1.Hollow (Open and Closed Cavity) Concrete Block- Grade Aor Grade B 2.Solid Concrete Block — Grade C)	-	2000	-
9.4- Table 2(PHYSICAL REQUIREMENTS - Compressive Strength 1.Minimum Average Compressive Strength of Units 2.Minimum Average Compressive Strength of Individual Unit)	-	4000	-
9.5(PHYSICAL REQUIREMENTS -Water Absorption)	-	2000	-
9.6(PHYSICAL REQUIREMENTS -Drying Shrinkage)	-	2500	-
9.7(PHYSICAL REQUIREMENTS -Moisture Movement)	-	2000	-

10 Nov, 2028

-
-

9157

Cotecna Inspection India Private Limited, Gurugram

8166106

IS 9730 (2008)

Non - Stick unreinforced plastics coatings on domestic cooking utensils - Specification (First Revision)

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Material)	-	500	-
4.2(Visual Defects)	-	500	-
4.3 & 7.2(Thickness)	-	1000	-
4.4 & 7.3(Non-stick Quality)	-	2000	-
4.5 & 7.4(Salt Water Corrosion Resistance)	-	2000	-
4.6, 7.5.2 & 7.5.3(Adhesion Test)	-	2500	-
5(Marking)	-	500	-
6(Instructions for use)	-	500	-
4.1(Material)	-	0	-
4.2(Visual Defects)	-	0	-
4.3 & 7.2(Thickness)	-	0	-
4.4 & 7.3(Non-stick Quality)	-	0	-
4.5 & 7.4(Salt Water Corrosion Resistance)	-	0	-
4.6, 7.5.2 & 7.5.3(Adhesion Test)	-	0	-
5(Marking)	-	0	-
6(Instructions for use)	-	0	-

-
-

9158

RAMCO RESEARCH AND DEVOLPMENT CENTRE, CHENNAI

6183606

IS 1290 (1973)

Specification for mineral gypsum (Second Revision)

11100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2 , Table No. 1 , i)(Free water)	-	1000	-
3.2 , Table No. 1 , iii)(Silica and other insoluble matter)	-	2800	-
3.2 , Table No. 1 , iv)(Iron and aluminium (as oxides))	-	2000	-
3.2 , Table No. 1 , v)(Magnesium oxide (as MgO))	-	1000	-
3.2 , Table No. 1 , vi)(Calcium sulphate (as CaSO4.2H2O))	-	1800	-
3.2 , Table No. 1 , vii)(Chlorides (as NaCl))	-	1500	-
3.3.1(Acidity and Alkalinity)	-	1000	-

12 Jan, 2028

-
-

9159

NDL POWER LIMITED, ROHTAK

9182206

IS 16081 (2013)

Insulating liquids - Specifications for unused synthetic organic esters for electrical purposes

12500.0 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Flash point and fire point)	-	500.0	ok
7.1.2(Appearance)	-	250.0	ok
7.1.3(Density)	-	500.0	ok
7.1.4(Kinematic viscosity)	-	500.0	ok
7.1.5(Flash point and fire point)	-	500.0	ok
7.1.6(Pour point)	-	500.0	ok
7.1.8(Water content)	-	500.0	ok
7.1.9(Acidity)	-	500.0	ok
7.1.10(Oxidation stability)	-	7500.0	ok
8.1(Breakdown voltage)	-	500.0	ok
8.2(Dielectric dissipation factor, permittivity and d.c. resistivity)	-	850.0	ok
9(Specifications for synthetic organic esters used in transformers)	-	0.0	ok
9(Specifications for synthetic organic esters used in transformers)	-	0.0	ok
5.3(Toxicity)	-	0.0	ok
6.1(Classification)	-	0.0	ok
6.2(Identification and general delivery requirements, sampling, packaging and disposal)	-	0.0	ok
6.3(Storage)	-	0.0	ok
6.4(Representative sampling)	-	0.0	ok
6.5(Disposal and spillages)	-	0.0	ok
4(General remarks)	-	0.0	ok
4(General remarks)	-	0.0	ok
7.1.10(Oxidation stability)	-	7500.0	ok
7.1.2(Appearance)	-	250.0	ok
7.1.3(Density)	-	500.0	ok
7.1.4(Kinematic viscosity)	-	500.0	ok
7.1.5(Flash point and fire point)	-	500.0	ok
7.1.6(Pour point)	-	500.0	ok
7.1.8(Water content)	-	500.0	ok
7.1.9(Acidity)	-	500.0	ok
5.1(Flash point and fire point)	-	500.0	ok
5.3(Toxicity)	-	0.0	ok
6.1(Classification)	-	0.0	ok
6.2(Identification and general delivery requirements, sampling, packaging and disposal)	-	0.0	ok
6.3(Storage)	-	0.0	ok
6.4(Representative sampling)	-	0.0	ok
6.5(Disposal and spillages)	-	0.0	ok
8.1(Breakdown voltage)	-	500.0	ok
8.2(Dielectric dissipation factor, permittivity and d.c. resistivity)	-	850.0	ok

10 Nov, 2027

-
Biodegradation (Cl 5.2), Gassing Tendency (Cl 8.3), Crystallization (Cl 7.1.7), Colour (Cl 7.1.1), Viscosity at - 20 degree Calcious (Cl. 9)

9160

RAMCO RESEARCH AND DEVOLPMENT CENTRE, CHENNAI

6183606

IS 3812 (Part 1) (2013)

Pulverized fuel ash - Specification: Part 1 For use as pozzolana in cement, cement mortar and concrete

30800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 6.1, Table 1 - i(Silicon dioxide (SiO2) plus aluminium oxide (Al2O3) plus ironoxide (Fe2O3) - IS 1727)	-	2000	-
Cl. 6.1, Table 1 - ii(Silicon dioxide (SiO2) - IS 1727)	-	1000	-
Cl. 6.1, Table 1 - iii(Reactive Silica - Annex B)	-	3000	-
Cl. 6.1, Table 1 - iv(Magnesium oxide (MgO) - IS 1727)	-	1000	-
Cl. 6.1, Table 1 - vi( Available alkalis as equivalent sodium oxide (Na2O) - Annex C)	-	1000	-
Cl. 6.1, Table 1 - vii( Total Chlorides - IS 4032)	-	1500	-
Cl. 6.1, Table 1 - viii( Loss on ignition - IS 1727)	-	1000	-
Cl. 6.2(Moisture content of the fly ash when supplied in dry condition - Annex D)	-	1000	-
7.1-Table 2(i)(PHYSICAL REQUIREMENTS-Fineness)	-	2000	-
7.1-Table 2(iii)(PHYSICAL REQUIREMENTS-Average compressive strength)	-	3000	-
7.1-Table 2(iv)(PHYSICAL REQUIREMENTS-Compressive strength at 28 days)	-	3000	-
7.1-Table 2(v)(PHYSICAL REQUIREMENTS-Soundness by autoclave test )	-	2000	-
7.2(Uniformity Requirements)	-	1000	-
5.1, 7.1, table-2, iii(Lime reacitivity)	-	3000	-
5.1, 7.1, table-2, iii(Lime reacitivity)	-	3000	-
Cl. 6.1, Table 1 - v( Total sulphur as sulphur trioxide (SO3) - IS 1727)	-	1800	-
5.1&7.1, table-2 (III)(Lime Reactivity)	-	3000	-
7.1-Table 2(ii)(PHYSICAL REQUIREMENTS-Particles retained on 45 micron IS sieve)	-	2000	-

12 Jan, 2028

-
-

9161

BIS, Eastern Regional Laboratory (ERL)

None

IS 15500 : PART 7 (2021)

Deepwell Handpumps, Components and Secial Tools — Specification Part 7 Handpumps

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2.1 ("The constructional details of different components covered in this part shall be as given in Fig. 7.1 to 7.18.")	-
2.2 (" The material and dimensions shall meet the related prerequisites given in 4 and 5 of Part 1.")	-
3 (TESTING)	-

-
Excluding Critical dimesnions

9162

BIS, Eastern Regional Laboratory (ERL)

None

IS 15500 : PART 4 (2021)

Deepwell Handpumps, Components and Secial Tools — Specification Part 4 Handpumps

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2.1 ("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-
2.2 ("2.2 The material and dimensions of the individual component shall meet the requirements given in the related part of this standard.")	-
2.3 ("The steel components shall be given anti-corrosive treatment as mentioned in 6 of Part 1. in Fig. 4.21B")	-
2.4 ("Stainless Steel top connecting rod shall be as given in Fig. 4.21B")	-
3.4 ("The flanges shall be reasonably flat to provide proper matching of the holes to ensure unrestricted insertion of the bolts when assembled with counterpart.")	-
3.5 ("The connecting rods/plunger rods shall be examined for straightness and formation of threads.")	-

-
Excluding Critical dimesnions

9163

NAWaL Analytical Labs India Private Limited, Hosur

6126416

IS 11536 (2022)

Processed Cereal Based Complementary Foods ? Specification ( Third Revision )

41000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4.7.2 and 4.10,Table 1 ,Sl No i)(Moisture)	-	500	+ 18 % GST Extra
Clause 4.7.2 and 4.10,Table 1 ,Sl No ii)(Total Protein)	-	500	+ 18 % GST Extra
Clause 4.7.2 and 4.10,Table 1 ,Sl No iii)(Total Fat)	-	500	+ 18 % GST Extra
Clause 4.7.2 and 4.10,Table 1 ,Sl No iV)(Total Carbohydrates)	-	500	+ 18 % GST Extra
Clause 4.7.2 and 4.10,Table 1 ,Sl No v)(Total Ash)	-	500	+ 18 % GST Extra
Clause 4.7.2 and 4.10,Table 1 ,Sl No vi)(Acid insoluble ash in dilute hydrochloric acid)	-	500	+ 18 % GST Extra
Clause 4.7.2 and 4.10,Table 1 ,Sl No vii)(Iron)	-	500	+ 18 % GST Extra
Clause 4.7.2 and 4.10,Table 1 ,Sl No viii)(Vitamin A (as Retinol equivalent RE))	-	1500	+ 18 % GST Extra
Clause 4.7.2 and 4.10,Table 1 ,Sl No ix)(Vitamin C)	-	1000	+ 18 % GST Extra
Clause 4.7.2 and 4.10,Table 1 ,Sl No x)(Vitamon D)	-	1000	+ 18 % GST Extra
Clause 4.7.2 and 4.10,Table 1 ,Sl No xi)(Crude fibre (on dry basis))	-	500	+ 18 % GST Extra
Clause 4.7.2 and 4.10,Table 1 ,Sl No xii)(Thiamine)	-	1000	+ 18 % GST Extra
Clause 4.7.2 and 4.10,Table 1 ,Sl No xiii)(Riboflavin)	-	1000	+ 18 % GST Extra
Clause 4.7.2 and 4.10,Table 1 ,Sl No xiv)(Niacin equivalent)	-	1000	+ 18 % GST Extra
Clause 4.7.2 and 4.10,Table 1 ,Sl No xv)(Pantothenic acid)	-	1000	+ 18 % GST Extra
Clause 4.7.2 and 4.10,Table 1 ,Sl No xvi)(Pyridoxine)	-	1000	+ 18 % GST Extra
Clause 4.7.2 and 4.10,Table 1 ,Sl No xvii)(Biotine)	-	1000	+ 18 % GST Extra
Clause 4.7.2 and 4.10,Table 1 ,Sl No xviii)(Dietary folate equivalent (DFE)2))	-	600	+ 18 % GST Extra
Clause 4.7.2 and 4.10,Table 1 ,Sl No xix)(Vitamin B12)	-	1000	+ 18 % GST Extra
Clause 4.7.2 and 4.10,Table 1 ,Sl No xx)(Zinc)	-	500	+ 18 % GST Extra
Clause 4.7.2 and 4.10,Table 1 ,Sl No xxi)(Choline)	-	2500	+ 18 % GST Extra
Clause 4.7.2 and 4.10,Table 1 ,Sl No xxii)(Inositol)	-	1500	+ 18 % GST Extra
Clause 4.7.2 and 4.10,Table 1 ,Sl No xxiii)(Selenium)	-	500	+ 18 % GST Extra
Clause 4.13,Table 3 ,Sl No i)(Lead)	-	500	+ 18 % GST Extra
Clause 4.13,Table 3 ,Sl No ii)(Copper)	-	500	+ 18 % GST Extra
Clause 4.13,Table 3 ,Sl No iii)(Arsenic)	-	500	+ 18 % GST Extra
Clause 4.13,Table 3 ,Sl No iv)(Tin)	-	500	+ 18 % GST Extra
Clause 4.13,Table 3 ,Sl No v)(Cadmium)	-	500	+ 18 % GST Extra
Clause 4.13,Table 3 ,Sl No vi)(Melamine)	-	1500	+ 18 % GST Extra
Clause 4.13,Table 3 ,Sl No vii)(Total aflatoxin)	-	2500	+ 18 % GST Extra
Clause 4.13,Table 3 ,Sl No viii)(Aflatoxin B1)	-	2500	+ 18 % GST Extra
Clause 4.10,Table 2 ,Sl No i)(Aerobic plate count)	-	500	+ 18 % GST Extra
Clause 4.10,Table 2 ,Sl No ii)(Coliform Count)	-	500	+ 18 % GST Extra
Clause 4.10,Table 2 ,Sl No iii)(Staphylococcus aureus (Coagulase positive))	-	500	+ 18 % GST Extra
Clause 4.10,Table 2 ,Sl No iv)(Yeast and mould count)	-	500	+ 18 % GST Extra
Clause 4.10,Table 2 ,Sl No v)(Salmonella sp.)	-	500	+ 18 % GST Extra
Clause 4.10,Table 2 ,Sl No vi)(Listeria moncytogenes)	-	500	+ 18 % GST Extra
Clause 4.10,Table 2 ,Sl No vii)(Bacillus cereus)	-	500	+ 18 % GST Extra
Clause 4.10,Table 2 ,Sl No viii)(Sulphite reducing clostridia)	-	500	+ 18 % GST Extra
Clause 4.10,Table 2 ,Sl No ix)(Escherichia coli)	-	500	+ 18 % GST Extra
4.1(Description- IS 11536)	-	500	+ 18 % GST Extra
4.1(Description- IS 11536)	-	0	Duplicate Entry
4.7.2, Table 1 (i)(Moisture -IS 16072/IS 11623)	-	0	Duplicate Entry
4.7.2, Table 1 (ii)(Total Protein (N x 6.25)- IS 7219/IS 16634 (P-2))	-	0	Duplicate Entry
4.7.2, Table 1 (iii)(Total fat - IS 11721 OR ISO 11085)	-	0	Duplicate Entry
4.7.2, Table 1 (iv)(Total carbohydrate -Annex C IS 1656)	-	0	Duplicate Entry
4.7.2, Table 1 (v)(Total Ash-Annex C IS 14433)	-	0	Duplicate Entry
4.7.2, Table 1 (vi)(Ash insoluble in dilute hydrochloric acid-Annex D IS 14433)	-	0	Duplicate Entry
4.7.2, Table 1 (vii)(Iron - ISO 15151 or ISO 21424 or AOAC 985.35)	-	0	Duplicate Entry
4.7.2, Table 1 (viii)(Vitamin A (as retinol equivalent RE)- IS 16639)	-	0	Duplicate Entry
4.7.2, Table 1 (ix)(Vitamin C - 5838 or IS 17176)	-	0.03	Duplicate Entry
4.7.2, Table 1 (x)(Vitamin D - IS 17177)	-	0	Duplicate Entry
4.7.2, Table 1 (xi)(Crude fibre(on dry basis)- IS 10226(P-1))	-	0	Duplicate Entry
4.7.2, Table 1 (xii)(Thiamine - IS 17669)	-	0	Duplicate Entry
4.7.2, Table 1 (xiii)(Riboflavin - IS 17669)	-	0	Duplicate Entry
4.7.2, Table 1 (xiv)(Niacin equialent - IS 17669)	-	0	Duplicate Entry
4.7.2, Table 1 (xv)(Pantothenic acid - IS 16642)	-	0	Duplicate Entry
4.7.2, Table 1 (xvi)(Pyridoxine - IS 17669)	-	0	Duplicate Entry
4.7.2, Table 1 (xviii)(Dietary Folate equivalent (DFE) - AOAC 2013.13)	-	0	Duplicate Entry
4.7.2, Table 1 (xix)(Vitamin B12 -IS 16640 or AOAC 2014.02)	-	0	Duplicate Entry
4.7.2, Table 1 (xx)(Zinc - 15 of IS 1699 or ISO 15151 or ISO 21424)	-	0	Duplicate Entry
4.7.2, Table 1 (xxi)(Choline - IS 17668)	-	0	Duplicate Entry
4.7.2, Table 1 (xxii)(Inositol - 16649 or any other validated international method)	-	0	Duplicate Entry
4.7.2, Table 1 (xxiii)(Selenium -IS 15303 or ISO 15151 or ISO 20649)	-	0	Duplicate Entry
"4.10 Table 2 (i) "(Aerobic plate count-IS 5402 (Part 1))	-	0	Duplicate Entry
"4.10 Table 2 (ii) "(Coliform count-IS 5401 (Part 1))	-	0	Duplicate Entry
"4.10 Table 2 (iii) "(Staphylococcuus aureus-IS 5887 (Part 2))	-	0	Duplicate Entry
"4.10 Table 2 (iv) "(Yeast & mould count-IS 5403)	-	0	Duplicate Entry
"4.10 Table 2 (v) "(Salmonella sp.-IS 5887 (Part 3))	-	0	Duplicate Entry
"4.10 Table 2 (vi) "(Listeria monocytogenes-IS 14988 (Part 1))	-	0	Duplicate Entry
"4.10 Table 2 (vii) "(Bacillus cereus-IS 5887 (Part 6))	-	0	Duplicate Entry
"4.10 Table 2 (viii)"(Sulphite reducing clostridia-ISO 15213)	-	0	Duplicate Entry
"4.10 Table 2 (ix)"(Escherichia coli-IS 5887 (Part 1))	-	0	Duplicate Entry
4.13, Table 3 (i)(Lead - IS 12074 or AOAC 2015.01)	-	0	Duplicate Entry
4.13, Table 3 (ii)(Copper - 15 of IS 1699 or ISO 15151 or ISO 21424)	-	0	Duplicate Entry
4.13, Table 3 (iii)(Arsenic - IS 11124 or AOAC 2015.01)	-	0	Duplicate Entry
4.13, Table 3 (iv)(Tin - ISO 14377)	-	0	Duplicate Entry
4.13, Table 3 (v)(Cadimum - 15 of IS 1699 or AOAC 2015.01)	-	0	Duplicate Entry
4.13, Table 3 (vi)(Melamine - IS 16195)	-	0	Duplicate Entry
4.13, Table 3 (vii)(Total aflatoxin - IS 16287)	-	0	Duplicate Entry
4.13, Table 3 (viii)(Aflatoxin B1 -IS 16287)	-	0	Duplicate Entry
4.15.1.5(Vibrio cholerae & Vibrio parahaemolyticus)	-	500	+ 18 % GST Extra
5.1.1(Bisphenol A (BPA))	-	3000	+ 18 % GST Extra
4.3(Protein content)	-	0	Duplicate Entry
4.4(Carbohydrates)	-	0	Duplicate Entry
"4.7.2, 4.10 Table 1: SN (xvii)"(Biotin)	-	0	Duplicate Entry
"4.7.2, 4.10 Table 1: SN (xvii)"(Biotin)	-	0	Duplicate Entry
CL 4.10, Table 2 (i)(Aerobic Plate Count)	-	0	Duplicate Entry
CL 4.10, Table 2 (ii)(Coliform Count)	-	0	Duplicate Entry
CL 4.10, Table 2 (iii)(Staphylococcus Aureus (Coagulase positive))	-	0	Duplicate Entry
CL 4.10, Table 2 (iv)(Yeast and Mould Count)	-	0	Duplicate Entry
CL 4.10, Table 2 (v)(Salmonella sp)	-	0	Duplicate Entry
CL 4.10, Table 2 (vi)(Listeria monocytogenes)	-	0	Duplicate Entry
CL 4.10, Table 2 (vii)(Bacillus cereus)	-	0	Duplicate Entry
CL 4.10, Table 2 (viii)(Sulphite reducing clostridia)	-	0	Duplicate Entry
CL 4.10, Table 2 (ix)(E. coli)	-	0	Duplicate Entry
4.6(Sodium-IS 12760)	-	500	+ 18 % GST Extra
Clause 4.7.2 and 4.10,Table 1 ,Sl No i)(Moisture)	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No ii)(Total Protein)	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No iii)(Total Fat)	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No iV)(Total Carbohydrates)	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No v)(Total Ash)	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No vi)(Acid insoluble ash in dilute hydrochloric acid)	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No vii)(Iron)	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No viii)(Vitamin A (as Retinol equivalent RE))	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No ix)(Vitamin C)	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No x)(Vitamon D)	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No xi)(Crude fibre (on dry basis))	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No xii)(Thiamine)	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No xiii)(Riboflavin)	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No xiv)(Niacin equivalent)	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No xv)(Pantothenic acid)	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No xvi)(Pyridoxine)	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No xvii)(Biotine)	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No xviii)(Dietary folate equivalent (DFE)2))	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No xix)(Vitamin B12)	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No xx)(Zinc)	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No xxi)(Choline)	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No xxii)(Inositol)	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No xxiii)(Selenium)	-	0	Duplicate Entry
Clause 4.13,Table 3 ,Sl No i)(Lead)	-	0	Duplicate Entry
Clause 4.13,Table 3 ,Sl No ii)(Copper)	-	0	Duplicate Entry
Clause 4.13,Table 3 ,Sl No iii)(Arsenic)	-	0	Duplicate Entry
Clause 4.13,Table 3 ,Sl No iv)(Tin)	-	0	Duplicate Entry
Clause 4.13,Table 3 ,Sl No v)(Cadmium)	-	0	Duplicate Entry
Clause 4.13,Table 3 ,Sl No vi)(Melamine)	-	0	Duplicate Entry
Clause 4.13,Table 3 ,Sl No vii)(Total aflatoxin)	-	0	Duplicate Entry
Clause 4.13,Table 3 ,Sl No viii)(Aflatoxin B1)	-	0	Duplicate Entry
Clause 4.10,Table 2 ,Sl No i)(Aerobic plate count)	-	0	Duplicate Entry
Clause 4.10,Table 2 ,Sl No ii)(Coliform Count)	-	0	Duplicate Entry
Clause 4.10,Table 2 ,Sl No iii)(Staphylococcus aureus (Coagulase positive))	-	0	Duplicate Entry
Clause 4.10,Table 2 ,Sl No iv)(Yeast and mould count)	-	0	Duplicate Entry
Clause 4.10,Table 2 ,Sl No v)(Salmonella sp.)	-	0	Duplicate Entry
Clause 4.10,Table 2 ,Sl No vi)(Listeria moncytogenes)	-	0	Duplicate Entry
Clause 4.10,Table 2 ,Sl No vii)(Bacillus cereus)	-	0	Duplicate Entry
Clause 4.10,Table 2 ,Sl No viii)(Sulphite reducing clostridia)	-	0	Duplicate Entry
Clause 4.10,Table 2 ,Sl No ix)(Escherichia coli)	-	0	Duplicate Entry
4.1(Description- IS 11536)	-	0	Duplicate Entry
4.6(Sodium-IS 12760)	-	0	Duplicate Entry
5.1.1(Bisphenol A (BPA))	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No i)(Moisture)	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No ii)(Total Protein)	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No iii)(Total Fat)	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No iV)(Total Carbohydrates)	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No v)(Total Ash)	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No vi)(Acid insoluble ash in dilute hydrochloric acid)	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No vii)(Iron)	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No viii)(Vitamin A (as Retinol equivalent RE))	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No ix)(Vitamin C)	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No x)(Vitamon D)	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No xi)(Crude fibre (on dry basis))	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No xii)(Thiamine)	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No xiii)(Riboflavin)	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No xiv)(Niacin equivalent)	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No xv)(Pantothenic acid)	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No xvi)(Pyridoxine)	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No xvii)(Biotine)	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No xviii)(Dietary folate equivalent (DFE)2))	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No xix)(Vitamin B12)	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No xx)(Zinc)	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No xxi)(Choline)	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No xxii)(Inositol)	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No xxiii)(Selenium)	-	0	Duplicate Entry
Clause 4.13,Table 3 ,Sl No i)(Lead)	-	0	Duplicate Entry
Clause 4.13,Table 3 ,Sl No ii)(Copper)	-	0	Duplicate Entry
Clause 4.13,Table 3 ,Sl No iii)(Arsenic)	-	0	Duplicate Entry
Clause 4.13,Table 3 ,Sl No iv)(Tin)	-	0	Duplicate Entry
Clause 4.13,Table 3 ,Sl No v)(Cadmium)	-	0	Duplicate Entry
Clause 4.13,Table 3 ,Sl No vi)(Melamine)	-	0	Duplicate Entry
Clause 4.13,Table 3 ,Sl No vii)(Total aflatoxin)	-	0	Duplicate Entry
Clause 4.13,Table 3 ,Sl No viii)(Aflatoxin B1)	-	0	Duplicate Entry
Clause 4.10,Table 2 ,Sl No i)(Aerobic plate count)	-	0	Duplicate Entry
Clause 4.10,Table 2 ,Sl No ii)(Coliform Count)	-	0	Duplicate Entry
Clause 4.10,Table 2 ,Sl No iii)(Staphylococcus aureus (Coagulase positive))	-	0	Duplicate Entry
Clause 4.10,Table 2 ,Sl No iv)(Yeast and mould count)	-	0	Duplicate Entry
Clause 4.10,Table 2 ,Sl No v)(Salmonella sp.)	-	0	Duplicate Entry
Clause 4.10,Table 2 ,Sl No vi)(Listeria moncytogenes)	-	0	Duplicate Entry
Clause 4.10,Table 2 ,Sl No vii)(Bacillus cereus)	-	0	Duplicate Entry
Clause 4.10,Table 2 ,Sl No viii)(Sulphite reducing clostridia)	-	0	Duplicate Entry
Clause 4.10,Table 2 ,Sl No ix)(Escherichia coli)	-	0	Duplicate Entry
4.1(Description- IS 11536)	-	0	Duplicate Entry
4.6(Sodium-IS 12760)	-	0	Duplicate Entry
5.1.1(Bisphenol A (BPA))	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No i)(Moisture)	-	0	0
Clause 4.7.2 and 4.10,Table 1 ,Sl No ii)(Total Protein)	-	0	0
Clause 4.7.2 and 4.10,Table 1 ,Sl No iii)(Total Fat)	-	0	0
Clause 4.7.2 and 4.10,Table 1 ,Sl No iV)(Total Carbohydrates)	-	0	0
Clause 4.7.2 and 4.10,Table 1 ,Sl No v)(Total Ash)	-	0	0
Clause 4.7.2 and 4.10,Table 1 ,Sl No vi)(Acid insoluble ash in dilute hydrochloric acid)	-	0	0
Clause 4.7.2 and 4.10,Table 1 ,Sl No vii)(Iron)	-	0	0
Clause 4.7.2 and 4.10,Table 1 ,Sl No viii)(Vitamin A (as Retinol equivalent RE))	-	0	0
Clause 4.7.2 and 4.10,Table 1 ,Sl No ix)(Vitamin C)	-	0	0
Clause 4.7.2 and 4.10,Table 1 ,Sl No x)(Vitamon D)	-	0	0
Clause 4.7.2 and 4.10,Table 1 ,Sl No xi)(Crude fibre (on dry basis))	-	0	0
Clause 4.7.2 and 4.10,Table 1 ,Sl No xii)(Thiamine)	-	0	0
Clause 4.7.2 and 4.10,Table 1 ,Sl No xiii)(Riboflavin)	-	0	0
Clause 4.7.2 and 4.10,Table 1 ,Sl No xiv)(Niacin equivalent)	-	0	0
Clause 4.7.2 and 4.10,Table 1 ,Sl No xv)(Pantothenic acid)	-	0	0
Clause 4.7.2 and 4.10,Table 1 ,Sl No xvi)(Pyridoxine)	-	0	0
Clause 4.7.2 and 4.10,Table 1 ,Sl No xvii)(Biotine)	-	0	0
Clause 4.7.2 and 4.10,Table 1 ,Sl No xviii)(Dietary folate equivalent (DFE)2))	-	0	0
Clause 4.7.2 and 4.10,Table 1 ,Sl No xix)(Vitamin B12)	-	0	0
Clause 4.7.2 and 4.10,Table 1 ,Sl No xx)(Zinc)	-	0	0
Clause 4.7.2 and 4.10,Table 1 ,Sl No xxi)(Choline)	-	0	0
Clause 4.7.2 and 4.10,Table 1 ,Sl No xxii)(Inositol)	-	0	0
Clause 4.7.2 and 4.10,Table 1 ,Sl No xxiii)(Selenium)	-	0	0
Clause 4.13,Table 3 ,Sl No i)(Lead)	-	0	0
Clause 4.13,Table 3 ,Sl No ii)(Copper)	-	0	0
Clause 4.13,Table 3 ,Sl No iii)(Arsenic)	-	0	0
Clause 4.13,Table 3 ,Sl No iv)(Tin)	-	0	0
Clause 4.13,Table 3 ,Sl No v)(Cadmium)	-	0	0
Clause 4.13,Table 3 ,Sl No vi)(Melamine)	-	0	0
Clause 4.13,Table 3 ,Sl No vii)(Total aflatoxin)	-	0	0
Clause 4.13,Table 3 ,Sl No viii)(Aflatoxin B1)	-	0	0
Clause 4.10,Table 2 ,Sl No i)(Aerobic plate count)	-	0	0
Clause 4.10,Table 2 ,Sl No ii)(Coliform Count)	-	0	0
Clause 4.10,Table 2 ,Sl No iii)(Staphylococcus aureus (Coagulase positive))	-	0	0
Clause 4.10,Table 2 ,Sl No iv)(Yeast and mould count)	-	0	0
Clause 4.10,Table 2 ,Sl No v)(Salmonella sp.)	-	0	0
Clause 4.10,Table 2 ,Sl No vi)(Listeria moncytogenes)	-	0	0
Clause 4.10,Table 2 ,Sl No vii)(Bacillus cereus)	-	0	0
Clause 4.10,Table 2 ,Sl No viii)(Sulphite reducing clostridia)	-	0	0
Clause 4.10,Table 2 ,Sl No ix)(Escherichia coli)	-	0	0
4.1(Description- IS 11536)	-	0	0
4.6(Sodium-IS 12760)	-	0	0
5.1.1(Bisphenol A (BPA))	-	0	0

21 Mar, 2028

-
Included w.e.f 07.01.2025

9164

National Fire Service College, Nagpur

7178804

IS 3809 (1979)

Fire resistance test for structures

1 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6(Integrity, Insulation)	-	1		-

29 Jul, 2027

-
-

9165

RAMCO RESEARCH AND DEVOLPMENT CENTRE, CHENNAI

6183606

IS 455 (2015)

Portland slag cement - Specification

36100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7 Table 1 iv c(Compretsive Strenqth 672 ± 4 hr IS 4031(Part 6))	-	3000	-
7 Table 1 iv b(Compretsive Strenqth 168 ± 2 hr IS 4031(Part 6))	-	3000	-
7 Table 1 iv a(Compretsive Strenqth .72 ± 1 hr IS 4031(Part 6))	-	3000	-
7 Table 1 iii b(Setting Time ( by Vicat Apparatus ), Final IS 4031(Part 5))	-	2000	-
7 Table 1 iii a(Setting Time ( by Vicat Apparatus ),Initial IS 4031(Part 5))	-	2000	-
7 Table 1 ii b(Soundness, Autoclave expansion IS 4031(Part 3) )	-	2000	-
7 Table 1 ii a(Soundness, Le-Chate1ier expansion IS 4031(Part 3) )	-	2000	-
7 Table 1 i(Fineness IS 4031(Part 2))	-	2000	-
6 - Table - 1 vii( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	2000	-
6 - Table - 1 vi(Chloride content - Cl 4.13 of IS 4032:1985)	-	1500	-
6 - Table - 1 v(Loss on ignition - Cl 6.2 of IS 4032:1985)	-	1000	-
6 - Table - 1 iv(Sulphide sulphur (S) - Cl 6.12 of IS 4032:1985)	-	1800	-
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 6.11 of IS 4032:1985)	-	1800	-
6 - Table - 1 ii(Magnesia - Cl 6.8 of IS 4032:1985)	-	1000	-
6 - Table - 1 i(Insoluble residue - Cl 6.9 of IS 4032:1985)	-	1800	-
7 Table 1 iv c(Compretsive Strenqth 672 ± 4 hr IS 4031(Part 6))	-	3000	-
7 Table 1 iv b(Compretsive Strenqth 168 ± 2 hr IS 4031(Part 6))	-	3000	-
7 Table 1 iv a(Compretsive Strenqth .72 ± 1 hr IS 4031(Part 6))	-	3000	-
7 Table 1 iii b(Setting Time ( by Vicat Apparatus ), Final IS 4031(Part 5))	-	2000	-
7 Table 1 iii a(Setting Time ( by Vicat Apparatus ),Initial IS 4031(Part 5))	-	2000	-
7 Table 1 ii b(Soundness, Autoclave expansion IS 4031(Part 3) )	-	2000	-
7 Table 1 ii a(Soundness, Le-Chate1ier expansion IS 4031(Part 3) )	-	2000	-
7 Table 1 i(Fineness IS 4031(Part 2))	-	2000	-
6 - Table - 1 vii( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	2000	-
6 - Table - 1 vi(Chloride content - Cl 4.13 of IS 4032:1985)	-	1500	-
6 - Table - 1 v(Loss on ignition - Cl 6.2 of IS 4032:1985)	-	1000	-
6 - Table - 1 iv(Sulphide sulphur (S) - Cl 6.12 of IS 4032:1985)	-	3500	-
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 6.11 of IS 4032:1985)	-	1800	-
6 - Table - 1 ii(Magnesia - Cl 6.8 of IS 4032:1985)	-	1000	-
6 - Table - 1 i(Insoluble residue - Cl 6.9 of IS 4032:1985)	-	1800	-
Cl. 7 Table-2(Cl. 7 Table-2 i (Fineness ))	-	2000	-
Cl. 7 Table-2(Cl. 7 Table-2 ii a (Expansion after aeration ))	-	2000	-
Cl. 7 Table-2(Cl. 7 Table-2 ii a (Soundness , Le Chatelier Expansion ))	-	2000	-
Cl. 7 Table-2(Cl. 7 Table-2 ii b (Expansion after aeration ))	-	2000	-
Cl. 7 Table-2(Cl. 7 Table-2 ii b (Soundness , Autoclave Expansion ))	-	2000	-
Cl. 7 Table-2(Cl. 7 Table-2 iii a (Setting time Initial))	-	2000	-
Cl. 7 Table-2(Cl. 7 Table-2 iii b (Setting time Final))	-	2000	-
Cl. 7 Table-2(Cl. 7 Table-2 iv a (Compressive Strength 72±1 hr IS))	-	3000	-
Cl. 7 Table-2(Cl. 7 Table-2 iv b (Compressive Strength 168±2 hr ))	-	3000	-
Cl. 7 Table-2(Cl. 7 Table-2 iv c (Compressive Strength 672±4 hr) )	-	3000	-

12 Jan, 2028

-
Exclusion: Clause 7 Table 1 v (Transverse strength)

9166

RAMCO RESEARCH AND DEVOLPMENT CENTRE, CHENNAI

6183606

IS 1489 (Part 1) (2015)

Portland pozzolana cement - Specification: Part 1 fly Ash Based

35100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	3000	-
7 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	3000	-
7 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	3000	-
7 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	2000	-
7 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	2000	-
7 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	2000	-
7 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	2000	-
7 -Table 2- i(Fineness 4031 Part 2)	-	2000	-
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	2000	-
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	1500	-
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	1000	-
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	1800	-
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	1000	-
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	1800	-
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	2000	-
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	1500	-
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	1000	-
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	1800	-
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	1000	-
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	1000	-
7 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	3000	-
7 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	3000	-
7 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	3000	-
7 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	3000	-
7 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	2000	-
7 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	2000	-
7 -Table 2- i(Fineness 4031 Part 2)	-	2000	-
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	2000	-
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	1500	-
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	1000	-
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	1800	-
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	1000	-
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	1500	-
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	2000	-
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	1500	-
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	1800	-
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	1000	-
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	1800	-
7 -Table 2- vi(Drying Shrinkage- IS 4031 Part 10)	-	3000	-
7 -Table 2- vi(Drying Shrinkage- IS 4031 Part 10)	-	3000	-
7 -Table 2- ii- a(Expansion after aeration - 4031 Part 3)	-	2000	-
7 -Table 2- ii- b(Expansion after aeration- 4031 Part 3)	-	2000	-
7 -Table 2- ii- b(Expansion after aeration- 4031 Part 3)	-	2000	-
7 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	2000	-
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	1000	-
7 -Table 2- ii- a(Expansion after aeration - 4031 Part 3)	-	2000	-

12 Jan, 2028

-
Exclusion: Clause 7 -Table 2- v (Transverse Strength)

9167

NAWaL Analytical Labs India Private Limited, Hosur

6126416

IS 4990 (2011)

Plywood for concrete shuttering works - Specification (Third Revision)

14500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.2(DIMENSIONS & TOLERANCES )	-	100	+18% GST Extra
7.2(DIMENSIONS & TOLERANCES )	-	100	+18% GST Extra
7.3(DIMENSIONS & TOLERANCES )	-	100	+18% GST Extra
7.4(DIMENSIONS & TOLERANCES )	-	100	+18% GST Extra
7.4(DIMENSIONS & TOLERANCES )	-	100	+18% GST Extra
10.1.1(MOISTURE CONTENT)	-	500	+18% GST Extra
10.1.2, 10.1.2.2(GLUE ADHESION IN DRY STATE)	-	500	+18% GST Extra
10.1.3, 10.1.3.1.2(RESISTANCE TO WATER TEST)	-	500	+18% GST ExtraV
10.1.5(MYCOLOGICAL TEST )	-	500	+18% GST Extra
10.1.5.2(MYCOLOGICAL TEST )	-	500	+18% GST Extra
10.1.9(RETENTION OF PRESERVATIVE)	-	1000	+18% GST Extra
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Rupture: Across the Face Grain: Minimum Individual))	-	500	+18% GST Extra
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Rupture: Across the Face Grain: Average))	-	500	+18% GST Extra
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Rupture: Along the Face Grain: Minimum Individual))	-	500	+18% GST Extra
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Rupture: Along the Face Grain: Average))	-	500	+18% GST Extra
Cl. 10.1.8 (Table 3)(Cl. 10.1.8 (Table 3) (Modulus of Elasticity: Across the Face Grain: Minimum Individual))	-	500	+18% GST Extra
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Elasticity: Across the Face Grain: Average))	-	500	+18% GST Extra
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Elasticity: Along the Face Grain: Minimum Individual))	-	500	+18% GST Extra
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Elasticity: Along the Face Grain: Average))	-	500	+18% GST Extra
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Rupture: Across the Face Grain: Minimum Individual))	-	500	+18% GST Extra
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Rupture: Across the Face Grain: Average))	-	500	+18% GST Extra
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Rupture: Along the Face Grain: Minimum Individual))	-	500	+18% GST Extra
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Rupture: Along the Face Grain: Average))	-	500	+18% GST Extra
Cl. 10.1.7 (Table 2)(Cl. 10.1.7 (Table 2) (Modulus of Elasticity: Across the Face Grain: Minimum Individual))	-	500	+18% GST Extra
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Elasticity: Across the Face Grain: Average))	-	500	+18% GST Extra
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Elasticity: Along the Face Grain: Minimum Individual))	-	500	+18% GST Extra
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Elasticity: Along the Face Grain: Average))	-	500	+18% GST Extra
Cl. 10.1.6(Cl. 10.1.6 (Tensile Strength: Sum of the Tensile Strength in two directions))	-	500	+18% GST Extra
Cl. 10.1.6 (Cl. 10.1.6 (Tensile Strength: Perpendicular to grain))	-	500	+18% GST Extra
Cl. 10.1.6(Cl. 10.1.6 (Tensile Strength: Parallel to grain))	-	500	+18% GST Extra
cl. 10.1.2.1(glue adhesion in dry state - glue shear strength - AVERAGE)	-	500	+18% GST Extra
cl. 10.1.2.1(glue adhesion in dry state - glue shear strength - WOOD FAILURE, Average)	-	500	+18% GST Extra
cl. 10.1.3.1(resistance to water test - glue shear strength - AVERAGE)	-	500	+18% GST Extra
cl. 10.1.3.1(resistance to water test - glue shear strength - WOOD FAILURE, Average)	-	500	+18% GST Extra
cl. 10.1.5.1(mycological test - glue shear strength - AVERAGE)	-	500	+18% GST Extra
cl. 10.1.5.1(mycological test - glue shear strength - WOOD FAILURE, Average)	-	500	+18% GST Extra
cl. 10.1.2.1(glue adhesion in dry state - glue shear strength - AVERAGE)	-	0	-
cl. 10.1.2.1(glue adhesion in dry state - glue shear strength - WOOD FAILURE, Average)	-	0	-
cl. 10.1.3.1(resistance to water test - glue shear strength - AVERAGE)	-	0	-
cl. 10.1.3.1(resistance to water test - glue shear strength - WOOD FAILURE, Average)	-	0	-
cl. 10.1.5.1(mycological test - glue shear strength - AVERAGE)	-	0	-
cl. 10.1.5.1(mycological test - glue shear strength - WOOD FAILURE, Average)	-	0	-

21 Mar, 2028

-
Included w.e.f 22.01.2025 Exclusion : Cl-11 (ADDITIONAL REQUIREMENTS FOR ECO MARK)

9168

Central Power Research Institute (CPRI), Bangalore

6101024

IS 15884 (2010)

Alternating current direct connected static prepayment meters for active energy (Class 1 And 2) - Specification

Type Test

1138210.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Requirements)	-	1110	Type Test Charges for 1 Phase meter is = Rs.11,18,530/- and Type Test Charges for 3 Phase meter is = Rs.11,30,210/- Proforma Invoice issued at the Time of Testing
4.1.1(By Inspection)	-	1110	Proforma Invoice issued at the Time of Testing
4.1.2(By Inspection)	-	1110	Proforma Invoice issued at the Time of Testing
4.1.3(By Inspection)	-	1110	Proforma Invoice issued at the Time of Testing
4.1.4(By Inspection)	-	1110	Proforma Invoice issued at the Time of Testing
4.2(Mechanical Requirements)	-	1110	Proforma Invoice issued at the Time of Testing
4.2.1(By Inspection)	-	1110	Proforma Invoice issued at the Time of Testing
4.2.1(By Inspection)	-	1110	Proforma Invoice issued at the Time of Testing
4.2.1(By Inspection)	-	1110	Proforma Invoice issued at the Time of Testing
4.2.1(By Inspection)	-	1110	Proforma Invoice issued at the Time of Testing
4.2.1(By Inspection)	-	1110	Proforma Invoice issued at the Time of Testing
4.2.1(By Inspection)	-	1110	Proforma Invoice issued at the Time of Testing
4.2.1(By Inspection)	-	1110	Proforma Invoice issued at the Time of Testing
4.2.1(By Inspection)	-	1110	Proforma Invoice issued at the Time of Testing
4.2.1(By Inspection)	-	1110	Proforma Invoice issued at the Time of Testing
4.2.2(By Inspection)	-	1110	Proforma Invoice issued at the Time of Testing
4.2.2(By Inspection)	-	1110	Proforma Invoice issued at the Time of Testing
4.2.2(By Inspection)	-	1110	Proforma Invoice issued at the Time of Testing
4.2.2(By Inspection)	-	1110	Proforma Invoice issued at the Time of Testing
4.2.2(By Inspection)	-	1110	Proforma Invoice issued at the Time of Testing
4.2.3(By Inspection)	-	1110	Proforma Invoice issued at the Time of Testing
4.2.4(IS 13360 (Part 6/Sec 17) for a temperature of 135°C and a pressure of 1.8 MPa (Method A).)	-	5500	Proforma Invoice issued at the Time of Testing
4.2.4(By Inspection)	-	1110	Proforma Invoice issued at the Time of Testing
4.2.4(By Inspection)	-	1110	Proforma Invoice issued at the Time of Testing
4.2.4(By Inspection)	-	1110	Proforma Invoice issued at the Time of Testing
4.2.4(By Inspection)	-	1110	Proforma Invoice issued at the Time of Testing
4.2.4(By Inspection)	-	1110	Proforma Invoice issued at the Time of Testing
4.2.4(By Inspection)	-	1110	Proforma Invoice issued at the Time of Testing
4.2.4(By Inspection)	-	1110	Proforma Invoice issued at the Time of Testing
4.2.4(By Inspection)	-	1110	Proforma Invoice issued at the Time of Testing
4.2.4(By Inspection)	-	1110	Proforma Invoice issued at the Time of Testing
4.2.4(By Inspection)	-	1110	Proforma Invoice issued at the Time of Testing
4.2.4(By Inspection)	-	1110	Proforma Invoice issued at the Time of Testing
4.2.4(By Inspection)	-	1110	Proforma Invoice issued at the Time of Testing
4.2.4(By Inspection)	-	1110	Proforma Invoice issued at the Time of Testing
4.2.4(By inserting copper conductor of appropriate size)	-	1110	Proforma Invoice issued at the Time of Testing
4.2.4(By Inspection)	-	1110	Proforma Invoice issued at the Time of Testing
4.2.4(By Inspection)	-	1110	Proforma Invoice issued at the Time of Testing
4.2.5(shall have a separate cover which can be sealed independently of the meter cover. The terminal cover shall enclose the actual terminals)	-	1110	Proforma Invoice issued at the Time of Testing
4.2.5(The terminals their fixing screws, a suitable length of external insulated conductor and its insulation shall be enclosed by a cover with a provision for sealing. )	-	1110	Proforma Invoice issued at the Time of Testing
4.2.5(The fixing screws used on the terminal cover for fixing and sealing shall be held captive in the terminal cover.)	-	1110	Proforma Invoice issued at the Time of Testing
4.2.5(When the meter is mounted on the meter board, no access to the terminals shall be possible without breaking the seal of the terminal cover.)	-	1110	Proforma Invoice issued at the Time of Testing
4.2.6(By measurement)	-	1110	Proforma Invoice issued at the Time of Testing
4.2.6(By measurement)	-	1110	Proforma Invoice issued at the Time of Testing
4.2.6(By measurement)	-	1110	Proforma Invoice issued at the Time of Testing
4.2.6(By measurement)	-	1110	Proforma Invoice issued at the Time of Testing
4.2.7(Standard test fingure)	-	15100	Proforma Invoice issued at the Time of Testing
4.2.10(Display of measured values)	-	1110	Proforma Invoice issued at the Time of Testing
4.2.10.1(By inspection)	-	1110	Proforma Invoice issued at the Time of Testing
4.2.10.1(By inspection)	-	1110	Proforma Invoice issued at the Time of Testing
4.2.10.1(By inspection)	-	1110	Proforma Invoice issued at the Time of Testing
4.2.10.2(By inspection)	-	1110	Proforma Invoice issued at the Time of Testing
4.2.10.3(By measurement)	-	1110	Proforma Invoice issued at the Time of Testing
4.2.10.4(By inspection)	-	1110	Proforma Invoice issued at the Time of Testing
4.2.10.5(By inspection)	-	1110	Proforma Invoice issued at the Time of Testing
4.2.10.5(By inspection)	-	1110	Proforma Invoice issued at the Time of Testing
4.2.10.5(By inspection)	-	1110	Proforma Invoice issued at the Time of Testing
4.2.10.5(By inspection)	-	1110	Proforma Invoice issued at the Time of Testing
4.2.10.5(By inspection)	-	1110	Proforma Invoice issued at the Time of Testing
4.2.10.5(By inspection)	-	1110	Proforma Invoice issued at the Time of Testing
4.2.10.6(By inspection)	-	1110	Proforma Invoice issued at the Time of Testing
4.2.10.6(By inspection)	-	1110	Proforma Invoice issued at the Time of Testing
4.2.10.6(By inspection)	-	1110	Proforma Invoice issued at the Time of Testing
4.2.10.7(By inspection)	-	1110	Proforma Invoice issued at the Time of Testing
4.2.10.7(By inspection)	-	1110	Proforma Invoice issued at the Time of Testing
4.2.10.8(Fig. 4, annexure F)	-	1110	Proforma Invoice issued at the Time of Testing
4.2.10.9(Fig. 5, annexure F)	-	1110	Proforma Invoice issued at the Time of Testing
4.2.10.9(Fig. 5, annexure F)	-	1110	Proforma Invoice issued at the Time of Testing
4.2.11(By inspection)	-	1110	Proforma Invoice issued at the Time of Testing
4.2.11.1(By inspection)	-	1110	Proforma Invoice issued at the Time of Testing
4.2.11.1(By inspection)	-	1110	Proforma Invoice issued at the Time of Testing
4.2.11.1(By inspection)	-	1110	Proforma Invoice issued at the Time of Testing
4.2.11.1(By inspection)	-	1110	Proforma Invoice issued at the Time of Testing
4.2.11.1(By inspection)	-	1110	Proforma Invoice issued at the Time of Testing
4.2.11.1(By inspection)	-	1110	Proforma Invoice issued at the Time of Testing
4.2.11.1(By inspection)	-	1110	Proforma Invoice issued at the Time of Testing
4.2.11.1(By inspection)	-	1110	Proforma Invoice issued at the Time of Testing
4.2.11.1(By inspection)	-	1110	Proforma Invoice issued at the Time of Testing
4.2.11.1(By inspection)	-	1110	Proforma Invoice issued at the Time of Testing
4.2.11.1(By inspection)	-	1110	Proforma Invoice issued at the Time of Testing
4.2.11.1(By inspection)	-	1110	Proforma Invoice issued at the Time of Testing
4.2.11.1(By inspection)	-	1110	Proforma Invoice issued at the Time of Testing
4.2.11.1(By inspection)	-	1110	Proforma Invoice issued at the Time of Testing
4.2.11.1(By inspection)	-	1110	Proforma Invoice issued at the Time of Testing
4.2.11.1(By inspection)	-	1110	Proforma Invoice issued at the Time of Testing
5.4.6(As per IS 2071 (Part1))	-	17600	Proforma Invoice issued at the Time of Testing
5.4.6.2(6 KV, As per cl 12.7.6.2 of IS 13779)	-	17600	Proforma Invoice issued at the Time of Testing
5.4.6.2(12.7.6.2 of IS 13779)	-	17600	Proforma Invoice issued at the Time of Testing
5.4.6.2(12.7.6.2 of IS 13779)	-	17600	Proforma Invoice issued at the Time of Testing
5.4.6.3(Table 15, power source 500 VA)	-	2440	Proforma Invoice issued at the Time of Testing
5.4.6.4(500±50V dc)	-	2440	Proforma Invoice issued at the Time of Testing
5.6(As per cl 4.6)	-	20000	Proforma Invoice issued at the Time of Testing
4.6.1(As per table 10 & 11, cl 5.6.1)	-	15640	Proforma Invoice issued at the Time of Testing
5.6.5(As per cl 4.6.5)	-	2560	Proforma Invoice issued at the Time of Testing
5.6.4(As per cl 4.6.3, Table 13)	-	132500	Proforma Invoice issued at the Time of Testing
5.6.3(I= open circuit V= 115% of rated voltage test period 60 000/k minutes)	-	2560	Proforma Invoice issued at the Time of Testing
5.6.7(Test shall be carried out at 0.05Ib and Ib at UPF load under reference conditions. Twenty error samples shall be taken at time-intervals of 30 minutes)	-	8770	Proforma Invoice issued at the Time of Testing
4.6.2(As per table 12)	-	15640	Proforma Invoice issued at the Time of Testing
5.4.1(As per 4.4.1.1)	-	1110	Proforma Invoice issued at the Time of Testing
4.4.2(Table 7)	-	15000	Proforma Invoice issued at the Time of Testing
5.4.2(As per 4.4.2.1)	-	21110	Proforma Invoice issued at the Time of Testing
5.4.3(Table 8, as per cl4.4.3)	-	24540	Proforma Invoice issued at the Time of Testing
5.4.4(Table 9, and cl 4.4.4)	-	17800	Proforma Invoice issued at the Time of Testing
5.4.4(Table 9, and cl 4.4.4)	-	17800	Proforma Invoice issued at the Time of Testing
5.4.5(As per cl 4.4.5)	-	3990	Proforma Invoice issued at the Time of Testing
5.5(Test of electromagnetic compatibility)	-	255000	Proforma Invoice issued at the Time of Testing
5.5.4(according to IS 14700 (Part 4/Sec 4))	-	5960	Proforma Invoice issued at the Time of Testing
5.5.3(Table 12 & IS 14700 (Part 4/Sec 3))	-	15600	Proforma Invoice issued at the Time of Testing
5.5.2(the load switch shall not operate during the tests.)	-	75000	Proforma Invoice issued at the Time of Testing
5.5.2(according to IS 14700 (Part 4/Sec 2))	-	5500	Proforma Invoice issued at the Time of Testing
5.5.6(Surge Immunity Test)	-	17600	Proforma Invoice issued at the Time of Testing
5.5.6(according to IEC 61000- 4-5)	-	17600	Proforma Invoice issued at the Time of Testing
5.5.6(according to IEC 61000- 4-5)	-	17600	Proforma Invoice issued at the Time of Testing
5.3(Tests of Climatic Influences)	-	35000	Proforma Invoice issued at the Time of Testing
5.3.1(according to IS 9000 (Part 3/ Sec 1 to 5))	-	8960	Proforma Invoice issued at the Time of Testing
5.3.2(according to IS 9000 (Part 2/Sec 1 to 4))	-	8960	Proforma Invoice issued at the Time of Testing
5.3.3(according to IS 9000 (Part 5/Sec 1 and 2))	-	16000	Proforma Invoice issued at the Time of Testing
5.3.3(according to IS 9000 (Part 5/Sec 1 and 2))	-	16000	Proforma Invoice issued at the Time of Testing
5.3.3(As per cl 5.4.6)	-	22500	Proforma Invoice issued at the Time of Testing
5.3.3(Visual examination)	-	1110	Proforma Invoice issued at the Time of Testing
5.2(Test of mechanical requirements)	-	25000	Proforma Invoice issued at the Time of Testing
5.2.3(As per IS 9000 (Part 8))	-	5000	Proforma Invoice issued at the Time of Testing
5.2.2(As per IS 9000 (Part 7/Sec 1))	-	5000	Proforma Invoice issued at the Time of Testing
5.2.1(As per cl 12.3.3 of IS 13779)	-	5000	Proforma Invoice issued at the Time of Testing
5.2.5(Protection against penetration of dust (IP5X))	-	15000	Proforma Invoice issued at the Time of Testing
5.2.5(As per IS 12063)	-	5000	Proforma Invoice issued at the Time of Testing
5.2.5(500 V dc)	-	2460	Proforma Invoice issued at the Time of Testing
5.2.5(Protection against penetration of water (IP1X))	-	15000	Proforma Invoice issued at the Time of Testing
5.2.5(As per IS 12063)	-	2460	Proforma Invoice issued at the Time of Testing
5.2.5(500 V dc)	-	2460	Proforma Invoice issued at the Time of Testing
5.2.4(As per IS 11000 (Part 2 / Sec1))	-	5600	Proforma Invoice issued at the Time of Testing
4.6.3(Limits of error due to Ambient temperature Variation)	-	4970	Proforma Invoice issued at the Time of Testing
4.6.6.2.2(Performance requirement for load switching Utilization category UC2 (Annex G.))	-	75000	Proforma Invoice issued at the Time of Testing
4.6.6.2.2 & G2(Normal operation)	-	25000	Proforma Invoice issued at the Time of Testing
4.6.6.2.2 & G3(Electrical endurance)	-	75000	Proforma Invoice issued at the Time of Testing
4.6.6.2.2 & G4(Line to load voltage surge withstand)	-	15000	Proforma Invoice issued at the Time of Testing
4.6.6.2.2 & G5(Fault current making capacity)	-	39110	Proforma Invoice issued at the Time of Testing
4.6.6.2.2 & G6(Short circuit current carrying capacity)	-	65000	Proforma Invoice issued at the Time of Testing
4.6.6.2.2 & G7(Minimum switched current)	-	25370	Proforma Invoice issued at the Time of Testing
4.6.6.2.2 & G8(Dielectric strength)	-	25000	Proforma Invoice issued at the Time of Testing
3.12.6, 4.6.6.2.1 & 5.1.7(Load Switching Capability (UC1))	-	76000	Proforma Invoice issued at the Time of Testing
5.8(Test of Load Switch)	-	76000	Proforma Invoice issued at the Time of Testing
5.9(Test of Consumption-Based charging function)	-	39970	Proforma Invoice issued at the Time of Testing
5.10(Test of Time-Based charging function)	-	75000	Proforma Invoice issued at the Time of Testing
4.2.10.8(General requirements- Mechanical and electrical characteristics)	-	8800	Proforma Invoice issued at the Time of Testing
4.2.10.9(General requirements- Optical characteristics)	-	8800	Proforma Invoice issued at the Time of Testing
4.2.12.3(Keypad Interface)	-	39000	Proforma Invoice issued at the Time of Testing
Annexure A(Functional Performance)	-	25890	Proforma Invoice issued at the Time of Testing
6(Functional Requirements)	-	39970	Proforma Invoice issued at the Time of Testing
4.6.6.2 , annexure G -8(Performance requirements for Prepayment Meters with Load switching utilization category UC2 and UC3)	-	75000	Proforma Invoice issued at the Time of Testing
4.6.6.2 , annexure G -7(Performance requirements for Prepayment Meters with Load switching utilization category UC2 and UC3)	-	76000	Proforma Invoice issued at the Time of Testing
4.6.6.2 , annexure G -6(Performance requirements for Prepayment Meters with Load switching utilization category UC2 and UC3)	-	76000	Proforma Invoice issued at the Time of Testing
4.6.6.2 , annexure G -5(Performance requirements for Prepayment Meters with Load switching utilization category UC2 and UC3)	-	75000	Proforma Invoice issued at the Time of Testing
4.6.6.2 , annexure G -4(Performance requirements for Prepayment Meters with Load switching utilization category UC2 and UC3)	-	76000	Proforma Invoice issued at the Time of Testing
4.6.6.2 , annexure G -3(Performance requirements for Prepayment Meters with Load switching utilization category UC2 and UC3)	-	75000	Proforma Invoice issued at the Time of Testing
4.6.6.2 , annexure G -2(Performance requirements for Prepayment Meters with Load switching utilization category UC2 and UC3)	-	75000	Proforma Invoice issued at the Time of Testing
4.6.6.2 .1(Load switching capability)	-	76000	Proforma Invoice issued at the Time of Testing
4.6.6.1 , annexure D - 4.3(Test of crystal Controlled Clocks in Payment Meters)	-	114400	Proforma Invoice issued at the Time of Testing
4.6.6.1 , annexure D - 4.2(Test of crystal Controlled Clocks in Payment Meters)	-	114400	Proforma Invoice issued at the Time of Testing
4.6.6.1 , annexure D - 4.1(Test of crystal Controlled Clocks in Payment Meters)	-	114400	Proforma Invoice issued at the Time of Testing
4.6.6.1 , annexure D - 3.2.3(Test of crystal Controlled Clocks in Payment Meters)	-	114400	Proforma Invoice issued at the Time of Testing
4.6.6.1 ,annexure D - 3.2.2(Test of crystal Controlled Clocks in Payment Meters)	-	9570	Proforma Invoice issued at the Time of Testing
4.6.6.1 ,annexure D - 3.2.1(Test of crystal Controlled Clocks in Payment Meters)	-	31240	Proforma Invoice issued at the Time of Testing
4.2.12(Test on Token Carrier Interface)	-	31240	Proforma Invoice issued at the Time of Testing
5.4(As per 5.6.1)	-	31240	Type Test Charges for 1 Phase meter is = Rs.11,18,530/- and Type Test Charges for 3 Phase meter is = Rs.11,30,210/- Proforma Invoice issued at the Time of Testing

31 Dec, 2026

-
Included w.e.f. 13.09.2024 Exclusion: 4.2.4 (Heat Deflection Test (HDT TEST)), 5.5.5 Radio Interference - Radiated Emission Test

9169

BIS, Eastern Regional Laboratory (ERL)

None

IS 11544 (1986)

Specification for slipper, rubber

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2.6 (Thickness of components)	-

-
Except colour fastness and thread test

9170

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 292 (1983)

Specification for leaded brass ingots and casting (Second Revision)

LCB-1,2

10150 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. No.3.1, Table no.1(Chemical composition)	-	5000	-
Cl. No.3.2(General compostion)	-	5000	-
Cl. No.4(pressure test)	-	4000	-
Cl. No.5(Freedom from defect)	-	100	-
Cl. No.6(Size and shape)	-	1000	-
Cl. No.7(Marking)	-	50	-
Cl.3.1(Copper+ incidental nickel -IS 3685)	-	1000	-
Cl.3.1(Lead - IS 3685)	-	800	-
Cl.3.1(Iron -IS 3685)	-	800	-
Cl.3.1(Aluminium - IS 3685)	-	800	-
Cl.3.1(Zinc - IS 3685)	-	800	-
Cl.3.1(Tin - IS 3685)	-	800	-
5(FREEDOM FROM DEFECTS)	-	100	-
6(Shape & size)	-	1000	-
Cl. No.3.1, Table no.1(Chemical composition)	-	5000	-
Cl. No.3.2(General compostion)	-	5000	-
Cl. No.4(pressure test)	-	4000	-
Cl. No.5(Freedom from defect)	-	100	-
Cl. No.6(Size and shape)	-	1000	-
Cl. No.7(Marking)	-	50	-
Cl.3.1(Copper+ incidental nickel -IS 3685)	-	1000	-
Cl.3.1(Lead - IS 3685)	-	800	-
Cl.3.1(Iron -IS 3685)	-	800	-
Cl.3.1(Aluminium - IS 3685)	-	800	-
Cl.3.1(Zinc - IS 3685)	-	800	-
Cl.3.1(Tin - IS 3685)	-	800	-
5(FREEDOM FROM DEFECTS)	-	100	-
6(Shape & size)	-	1000	-

31 Dec, 2026

-
Included w.e.f. 02.07.2024.

9171

NAWaL Analytical Labs India Private Limited, Hosur

6126416

IS 710 (2010)

Marine plywood - Specification (Second Revision)

14500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(DIMENSIONS)	-	100	+ 18 % GST Extra
6.1(DIMENSIONS)	-	100	+ 18 % GST Extra
6.2(DIMENSIONS)	-	100	+ 18 % GST Extra
6.3(DIMENSIONS)	-	100	+ 18 % GST Extra
6.3(DIMENSIONS)	-	100	+ 18 % GST Extra
9.1.1(MOISTURE CONTENT)	-	500	+ 18 % GST Extra
9.1.3 , 9.1.3.1.2(Water resistance test)	-	500	+ 18 % GST Extra
9.1.2 , 9.1.2.2(Glue Adhesion in Dry State)	-	500	+ 18 % GST Extra
9.1.5 , 9.1.3.1.2(Mycological test)	-	500	+ 18 % GST Extra
9.1.8(Retention of preservative)	-	1000	+ 18 % GST Extra
Cl. 9.1.7 (Table 4) (Cl. 9.1.7 (Table 4) (Modulus of Rupture: Across the Face Grain: Minimum Individual))	-	500	+ 18 % GST Extra
Cl. 9.1.7 (Table 4) (Cl. 9.1.7 (Table 4) (Modulus of Rupture: Across the Face Grain: Average))	-	500	+ 18 % GST Extra
Cl. 9.1.7 (Table 4) (Cl. 9.1.7 (Table 4) (Modulus of Rupture: Along the Face Grain: Minimum Individual))	-	500	+ 18 % GST Extra
Cl. 9.1.7 (Table 4) (Cl. 9.1.7 (Table 4) (Modulus of Rupture: Along the Face Grain: Average))	-	500	+ 18 % GST Extra
Cl. 9.1.7 (Table 4)(Cl. 9.1.7 (Table 4) (Modulus of Elasticity: Across the Face Grain: Minimum Individual))	-	500	+ 18 % GST Extra
Cl. 9.1.7 (Table 4) (Cl. 9.1.7 (Table 4) (Modulus of Elasticity: Across the Face Grain: Average))	-	500	+ 18 % GST Extra
Cl. 9.1.7 (Table 4) (Cl. 9.1.7 (Table 4) (Modulus of Elasticity: Along the Face Grain: Minimum Individual))	-	500	+ 18 % GST Extra
Cl. 9.1.7 (Table 4) (Cl. 9.1.7 (Table 4) (Modulus of Elasticity: Along the Face Grain: Average))	-	500	+ 18 % GST Extra
Cl. 9.1.6 (Table 3) (Cl. 9.1.6 (Table 3) (Modulus of Rupture: Across the Face Grain: Minimum Individual))	-	500	+ 18 % GST Extra
Cl. 9.1.6 (Table 3) (Cl. 9.1.6 (Table 3) (Modulus of Rupture: Across the Face Grain: Average))	-	500	+ 18 % GST Extra
Cl. 9.1.6 (Table 3) (Cl. 9.1.6 (Table 3) (Modulus of Rupture: Along the Face Grain: Minimum Individual))	-	500	+ 18 % GST Extra
Cl. 9.1.6 (Table 3) (Cl. 9.1.6 (Table 3) (Modulus of Rupture: Along the Face Grain: Average))	-	500	+ 18 % GST Extra
Cl. 9.1.6 (Table 3)(Cl. 9.1.6 (Table 3) (Modulus of Elasticity: Across the Face Grain: Minimum Individual))	-	500	+ 18 % GST Extra
Cl. 9.1.6 (Table 3) (Cl. 9.1.6 (Table 3) (Modulus of Elasticity: Across the Face Grain: Average))	-	500	+ 18 % GST Extra
Cl. 9.1.6 (Table 3) (Cl. 9.1.6 (Table 3) (Modulus of Elasticity: Along the Face Grain: Minimum Individual))	-	500	+ 18 % GST Extra
Cl. 9.1.6 (Table 3) (Cl. 9.1.6 (Table 3) (Modulus of Elasticity: Along the Face Grain: Average))	-	500	+ 18 % GST Extra
Cl. 9.1.4(Cl. 9.1.4 (Tensile Strength: Sum of the Tensile Strength in two directions))	-	500	+ 18 % GST Extra
Cl. 9.1.4 (Cl. 9.1.4 (Tensile Strength: Perpendicular to grain))	-	500	+ 18 % GST Extra
Cl. 9.1.4(Cl. 9.1.4 (Tensile Strength: Parallel to grain))	-	500	+ 18 % GST Extra
Cl.9.1.5,9.1.3.1.1(Cl.9.1.5 (Mycological Test),9.1.3.1.1 (Glue Shear Strength: Individual))	-	500	+ 18 % GST Extra
Cl.9.1.5,9.1.3.1.1(Cl.9.1.5 (Mycological Test),9.1.3.1.1 ( Glue Shear Strength: Average))	-	500	+ 18 % GST Extra
Cl. 9.1.3, 9.1.3.1.1 (Cl. 9.1.3 (Water Resistance Test) , 9.1.3.1.1 (Glue Shear Strength: Individual))	-	500	+ 18 % GST Extra
Cl. 9.1.3, 9.1.3.1.1 (Cl. 9.1.3 (Water Resistance Test ), 9.1.3.1.1 (Glue Shear Strength: Average))	-	500	+ 18 % GST Extra
Cl. 9.1.2, 9.1.2.1 (Cl. 9.1.2 (Glue Adhesion in Dry State), 9.1.2.1 ( Glue Shear Strength: Individual))	-	500	+ 18 % GST Extra
Cl. 9.1.2, 9.1.2.1 (Cl. 9.1.2 (Glue Adhesion in Dry State), 9.1.2.1 ( Glue Shear Strength: Average ))	-	500	+ 18 % GST Extra
6.1(DIMENSIONS)	-	0	0
6.1(DIMENSIONS)	-	0	0
6.2(DIMENSIONS)	-	0	0
6.3(DIMENSIONS)	-	0	0
6.3(DIMENSIONS)	-	0	0
9.1.1(MOISTURE CONTENT)	-	0	0
9.1.3 , 9.1.3.1.2(Water resistance test)	-	0	0
9.1.2 , 9.1.2.2(Glue Adhesion in Dry State)	-	0	0
9.1.5 , 9.1.3.1.2(Mycological test)	-	0	0
9.1.8(Retention of preservative)	-	0	0

21 Mar, 2028

-
Included w.e.f 22.01.2025

9172

NAWaL Analytical Labs India Private Limited, Hosur

6126416

IS 303 (1989)

Plywood for General Purposes -

11500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-	1000	+18 % GST Extra
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-	1000	+18 % GST Extra
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-	1000	+18 % GST Extra
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-	1000	+18 % GST Extra
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-	1000	+18 % GST Extra
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-	1000	+18 % GST Extra
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	1000	+18 % GST Extra
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	1000	+18 % GST Extra
11.2.2(Glue Adhesion - Mycological test - 11.2.2, Part 7 of IS 1734 [for MR Garde only])	-	1000	+18 % GST Extra
11.2.1(Glue Adhesion - Water resistance test - 11.2.1.1 [for MR Grade])	-	500	+18 % GST Extra
11.2.1(Glue Adhesion - Water resistance test - 11.2.1.1 [for BWR Grade])	-	500	+18 % GST Extra
11.3(Moisture Content - Part 1 of IS 1734)	-	1000	+18 % GST Extra
8(Dimensions & Tolerances - Edge Straightness - Annexure C)	-	100	+18 % GST Extra
8(Dimensions & Tolerances - Squareness - Annexure C)	-	100	+18 % GST Extra
8(Dimensions & Tolerances - Thickness - Cl. 8)	-	100	+18 % GST Extra
8(Dimensions & Tolerances - Width - Cl. 8)	-	100	+18 % GST Extra
8(Dimensions & Tolerances - Length - Cl. 8)	-	100	+18 % GST Extra

21 Mar, 2028

-
Included w.e.f 22.01.2025 Exclusion : Cl-12 (Amendment No-2 OF IS 303) (OPTIONAL REQUIREMENT FOR ECO MARK)

9173

IDMA LABORATORIES LIMITED, PANCHKULA

9123236

IS 4412 (1981)

Specification for copper wires for general engineering purposes (First Revision)

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4(Chemical Composition)	-	0	Total testing charges including chemical composition are Rs.12000/- Total Testing charges excluding chemical composition are Rs.6000/- Testing charges for Finish are Rs.500/-
5.1(Tensile Test)	-	2000	Testing charges for Tensile strength and Elongation are Rs.1000/-each.
6(Freedom from defect)	-	1000	-
7.1(Diameter and Tolerances)	-	2500	Testing charges for Dimension and Tolerances (Diameter/Distance between two parallel faces, Thickness, Radius of Square corner) are Rs.2500/-
Clause 4.1 ( Table -1)(Copper+Silver)	-	6000	Testing charges for chemical composition (Cu,Silver,Cu+Ag,P,Sb,Bi,Fe,Pb,Ni,Se+Te,Te,Sn,Total impurities) are Rs.6000/-
Clause 4.1 ( Table -1)(phosphorus)	-	0	Testing charges for chemical composition (Cu,Silver,Cu+Ag,P,Sb,Bi,Fe,Pb,Ni,Se+Te,Te,Sn,Total impurities) are Rs.6000/- already mentioned above.
Clause 4.1 ( Table -1)(Antimony)	-	0	Testing charges for chemical composition (Cu,Silver,Cu+Ag,P,Sb,Bi,Fe,Pb,Ni,Se+Te,Te,Sn,Total impurities) are Rs.6000/- already mentioned above.
Clause 4.1 ( Table -1)(Arsenic)	-	0	Testing charges for chemical composition (Cu,Silver,Cu+Ag,P,Sb,Bi,Fe,Pb,Ni,Se+Te,Te,Sn,Total impurities) are Rs.6000/- already mentioned above.
Clause 4.1 ( Table -1)(Bismuth)	-	0	Testing charges for chemical composition (Cu,Silver,Cu+Ag,P,Sb,Bi,Fe,Pb,Ni,Se+Te,Te,Sn,Total impurities) are Rs.6000/- already mentioned above.
Clause 4.1 ( Table -1)(Iron)	-	0	Testing charges for chemical composition (Cu,Silver,Cu+Ag,P,Sb,Bi,Fe,Pb,Ni,Se+Te,Te,Sn,Total impurities) are Rs.6000/- already mentioned above.
Clause 4.1 ( Table -1)(Lead)	-	0	Testing charges for chemical composition (Cu,Silver,Cu+Ag,P,Sb,Bi,Fe,Pb,Ni,Se+Te,Te,Sn,Total impurities) are Rs.6000/- already mentioned above.
Clause 4.1 ( Table -1)(Nckel)	-	0	Testing charges for chemical composition (Cu,Silver,Cu+Ag,P,Sb,Bi,Fe,Pb,Ni,Se+Te,Te,Sn,Total impurities) are Rs.6000/- already mentioned above.
Clause 4.1 ( Table -1)(Selenium+Tellurium)	-	0	Testing charges for chemical composition (Cu,Silver,Cu+Ag,P,Sb,Bi,Fe,Pb,Ni,Se+Te,Te,Sn,Total impurities) are Rs.6000/- already mentioned above.
Clause 4.1 ( Table -1)(Tellurium)	-	0	Testing charges for chemical composition (Cu,Silver,Cu+Ag,P,Sb,Bi,Fe,Pb,Ni,Se+Te,Te,Sn,Total impurities) are Rs.6000/- already mentioned above.
Clause 4.1 ( Table -1)(Tin)	-	0	Testing charges for chemical composition (Cu,Silver,Cu+Ag,P,Sb,Bi,Fe,Pb,Ni,Se+Te,Te,Sn,Total impurities) are Rs.6000/- already mentioned above.
Clause 4.1 ( Table -1)(Total Impurities)	-	0	Testing charges for chemical composition (Cu,Silver,Cu+Ag,P,Sb,Bi,Fe,Pb,Ni,Se+Te,Te,Sn,Total impurities) are Rs.6000/- already mentioned above.

31 Dec, 2026

-
Included w.e.f.21.11.2024 Exclusion CL 5.2 (Embrittlement Test) (Given to ATH)

9174

NAWaL Analytical Labs India Private Limited, Hosur

6126416

IS 5509 (2021)

Fire Retardant Plywood - Specification ( Third Revision )

9500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.3 (Table 1)(b) 6 mm and above)	-	100	+ 18 % GST Extra
8.1(Dimensions)	-	100	+ 18 % GST Extra
8.2(Thickness)	-	100	+ 18 % GST Extra
11 (a)(For flammability)	-	2000	+ 18 % GST Extra
11 (b)(For flame penetration)	-	2000	+ 18 % GST Extra
11 (c)(For rate of burning)	-	2000	+ 18 % GST Extra
12.1 Table - 2 (i)(Moisture content, percent, Max)	-	1000	+ 18 % GST Extra
12.1 Table - 2 (ii)(Flammability (see Note 1), minutes, Min)	-	0	0
12.1 Table - 2 (iii)(Flame penetration (see Note 2), minutes, Min)	-	0	0
12.1 Table - 2 (iv)(Rate of burning (see Note 3), minutes, Min)	-	0	0
12.2(Other Tests)	-	2000	+ 18 % GST Extra
8.3, Taable-1 (i)(Tolerance- Length)	-	200	+ 18 % GST Extra

21 Mar, 2028

-
Included w.e.f 06.12.2024

9175

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 3748 (2022)

Tool Steels - Specification

Tool Steels

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.4(Shape, dimensions and tolerances)	-	200	-
7.2(Chemical Composition)	-	4900	-
7.2(Carbon)	-	200	-
7.2(Silicon)	-	200	-
7.2(Manganese)	-	200	-
7.2(Nickel)	-	200	-
7.2(Chromium)	-	200	-
7.2(Molybdenum)	-	200	-
7.2(Sulphur)	-	200	-
7.2(Phosphorus)	-	200	-
7.2(Nitrogen)	-	1500	-
7.2(Copper)	-	200	-
7.2(Aluminium)	-	200	-
7.2(Titanium)	-	200	-
7.2(Niobium)	-	200	-
7.2(Cerium)	-	200	-
7.2(Tantalum)	-	200	-
7.2(Cobalt)	-	200	-
7.2(Tungsten)	-	200	-
7.2(Vanadium)	-	200	-
7.3(Surface Quality)	-	200	-
7.4(Shapes, dimensions and tolerances)	-	200	-
7.2(Hardness Test)	-	1000	-
Annex B.3(Verification of Minimum Hardness in Hardening Test)	-	500	-
Annex B.7(Non-Destructive Test)	-	1000	-
As per Clause 7.2, Table 2 to 9(Carbon)	-	200	-
As per Clause 7.2, Table 2 to 9(Silicon)	-	200	-
As per Clause 7.2, Table 2 to 9(Manganese)	-	200	-
As per Clause 7.2, Table 2 to 9(Chromium)	-	200	-
As per Clause 7.2, Table 2 to 9(Sulphur)	-	200	-
As per Clause 7.2, Table 2 to 9(phosphorus)	-	200	-
As per Clause 7.2, Table 2 to 9(Cobalt)	-	200	-
As per Clause 7.2, Table 2 to 9(Molybdenum)	-	200	-
As per Clause 7.2, Table 2 to 9(vanadium)	-	200	-
As per Clause 7.2, Table 2 to 9(Tunsten)	-	200	-
As per Clause 7.2, Table 2 to 9(Nickel)	-	200	-
As per Clause 7.2, Table 2 to 9(Nitrogen)	-	1500	-
4.1(Classification)	-	200	-
4.2(Designation)	-	200	-
6.2.1(General)	-	100	-
6.2.2(Heat-treatment condition)	-	200	-
6.2.3(Surface Condition)	-	200	-
7.1(General requirements)	-	50	-
7.2(Chemical composition and mechanical properties)	-	8200	-
7.3(Surface quality)	-	200	-
7.4(Shape, dimensions and tolerances)	-	200	-
9(Marking)	-	50	-
11.1(Product diameter or thickness ≥ 15 mm)	-	100	-
11.2(Product diameter or thickness < 15 mm)	-	100	-

31 Dec, 2026

-
Included w.e.f. 11.06.2024

9176

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 4171 (1983)

Specification for copper rods and bars for general engineering purposes (First Revision)

Copper rods and bars for general engineering purposes

17000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4.1 Table 1(1. Copper, including silver, min)	-	1000	-
Clause 4.1 Table 1(2. Tin, max)	-	1000	-
Clause 4.1 Table 1(3. Lead, max)	-	1000	-
Clause 4.1 Table 1(5. Nickel, max)	-	1000	-
Clause 4.1 Table 1(6. Arsenic, max)	-	1000	-
Clause 4.1 Table 1(7. Antimony, max)	-	1000	-
Clause 4.1 Table 1(8. Bismuth, max)	-	2000	-
Clause 4.1 Table 1(9. Phosphorus)	-	2000	-
Clause 4.1 Table 1(10. Selenium and Tellurium, max)	-	2000	-
Clause 4.1 Table 1(11. Total impurities ( excluding silver, nickel and phosphorus ), max)	-	1000	-
5.2(Hydrogen Embrittlement test)	-	1000	-
5.1(Tensile Properties)	-	2000	-
7.1(Dimension and Tolerances)	-	1000	-
Clause 4.1 Table 1(1. Copper, including silver, min)	-	0	-
Clause 4.1 Table 1(2. Tin, max)	-	0	-
Clause 4.1 Table 1(3. Lead, max)	-	0	-
Clause 4.1 Table 1(5. Nickel, max)	-	0	-
Clause 4.1 Table 1(6. Arsenic, max)	-	0	-
Clause 4.1 Table 1(7. Antimony, max)	-	0	-
Clause 4.1 Table 1(8. Bismuth, max)	-	0	-
Clause 4.1 Table 1(9. Phosphorus)	-	0	-
Clause 4.1 Table 1(10. Selenium and Tellurium, max)	-	0	-
Clause 4.1 Table 1(11. Total impurities ( excluding silver, nickel and phosphorus ), max)	-	0	-
5.2(Hydrogen Embrittlement test)	-	0	-
5.1(Tensile Properties)	-	0	-
7.1(Dimension and Tolerances)	-	0	-
Clause 4.1 Table 1(1. Copper, including silver, min)	-	0	-
Clause 4.1 Table 1(2. Tin, max)	-	0	-
Clause 4.1 Table 1(3. Lead, max)	-	0	-
Clause 4.1 Table 1(5. Nickel, max)	-	0	-
Clause 4.1 Table 1(6. Arsenic, max)	-	0	-
Clause 4.1 Table 1(7. Antimony, max)	-	0	-
Clause 4.1 Table 1(8. Bismuth, max)	-	0	-
Clause 4.1 Table 1(9. Phosphorus)	-	0	-
Clause 4.1 Table 1(10. Selenium and Tellurium, max)	-	0	-
Clause 4.1 Table 1(11. Total impurities ( excluding silver, nickel and phosphorus ), max)	-	0	-
5.2(Hydrogen Embrittlement test)	-	0	-
5.1(Tensile Properties)	-	0	-
7.1(Dimension and Tolerances)	-	0	-

-
-

9177

Bharat Test House Pvt Ltd 781 Sonipat Haryana

9137826

IS 14772 (2020)

Boxes and Enclosures for Electrical Accessories for Household and Similar Fixed Electrical Installations — General Requirements ( First Revision )

Boxes and Enclosures for Electrical Accessories

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1(Nature of material)	-	200	-
7.2(Type of installation)	-	200	-
7.3(Types of inlets)	-	200	-
7.4(Clamping means)	-	200	-
7.5(Minimum temperature during installation)	-	200	-
7.6, 7.7, 7.8(The degree of ingress protection)	-	200	-
7.9(The provision for fixing accessories to the boxes )	-	200	-
7.1(The method of fixing the terminals)	-	200	-
8.1(marking)	-	200	-
8.2(By Inspection and The marking is rubbed by hand 15s width a piece of cloth soaked with water and again for 15s with a piece of cloth soaked with petroleum spirit.)	-	200	-
8.3(BIS Certification Marking)	-	200	-
9.0(Dimensions)	-	1000	-
10.0(Protection against electric shock)	-	1500	-
11.0(PROVISION FOR EARTHING)	-	1000	-
12.0(Constructions)	-	3500	-
13.0(Resistance to ingress of solid objects)	-	4000	-
13.0(Resistance toharmful ingress of water)	-	4000	-
13.0(Resistance to ageing)	-	4000	-
14.0(insultation resistance)	-	2500	-
14.0(electric strength)	-	2500	-
15.0(Mechanical strength)	-	2500	-
16.0(resistance to heat)	-	2500	-
17.0(creepage distance)	-	1500	-
17.0(clearances)	-	1500	-
17.0(distance through seating compund)	-	1500	-
18.0(Resistance to insulating material to abnormal heat and fire)	-	4000	-
19.0(Resistance to tracking)	-	2750	-
20.0(Resistance to corrosion)	-	2750	-
21.0(Electromagnetic compatibility (EMC))	-	0	-

31 Dec, 2026

-
-

9178

IDMA LABORATORIES LIMITED, PANCHKULA

9123236

IS 1726 (1991)

Cast iron manhole covers and frames - Specification (Third Revision)

LD-2.5, MD-10, HD-20,EHD-35

11000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(GRADES )	-	0	Total testing charges for Material (Cl. 4) are Rs. 3800/- (Testing charges for Material composition are Rs. 2000/- (P, S, C, Mn, Si are Rs.400/-each) . Testing charges for Tensile Test are Rs. 1000/- Testing charges for Hardness Test are Rs. 800/-)
3(TYPES)	-	0	Testing charges for Workmanship are Rs. 400/-
5.1.1(Covers and Frames)	-	500	-
5.1.2(Covers and Frames)	-	800	-
5.1.2(The rise of the chequer)	-	0	Testing charges for cover and frame ( Cover chequer design and rise) are Rs.800/-already mentioned above.
5.2(Key Holes and Keys)	-	1000	-
5.2 and Fig.1 (Key Holes and Keys)	-	0	Testing charges for key holes and keys, Dimension of key holes and dimension of keys are Rs.1000/- already mentioned above.
5.2 and Fig.1 (Key Holes and Keys)	-	0	Testing charges for key holes and keys, Dimension of key holes and dimension of keys are Rs.1000/- already mentioned above.
5.2 and Fig.1 (Key Holes and Keys)	-	0	Testing charges for key holes and keys, Dimension of key holes and dimension of keys are Rs.1000/- already mentioned above.
5.2 and Fig.1 (Key Holes and Keys)	-	0	Testing charges for key holes and keys, Dimension of key holes and dimension of keys are Rs.1000/- already mentioned above.
5.2 and Fig.1 (Key Holes and Keys)	-	0	Testing charges for key holes and keys, Dimension of key holes and dimension of keys are Rs.1000/- already mentioned above.
5.2 and Fig.1 (Key Holes and Keys)	-	0	Testing charges for key holes and keys, Dimension of key holes and dimension of keys are Rs.1000/- already mentioned above.
5.2 and Fig.1 (Key Holes and Keys)	-	0	Testing charges for key holes and keys, Dimension of key holes and dimension of keys are Rs.1000/- already mentioned above.
5.2 and Fig.1 (Key Holes and Keys)	-	0	Testing charges for key holes and keys, Dimension of key holes and dimension of keys are Rs.1000/- already mentioned above.
5.2 and Fig.1 (Key Holes and Keys)	-	0	Testing charges for key holes and keys, Dimension of key holes and dimension of keys are Rs.1000/- already mentioned above.
5.2 and Fig.1 (Key Holes and Keys)	-	0	Testing charges for key holes and keys, Dimension of key holes and dimension of keys are Rs.1000/- already mentioned above.
5.2 and Fig.1 (Key Holes and Keys)	-	0	Testing charges for key holes and keys, Dimension of key holes and dimension of keys are Rs.1000/- already mentioned above.
5.2 and Fig.1 (Key Holes and Keys)	-	0	Testing charges for key holes and keys, Dimension of key holes and dimension of keys are Rs.1000/- already mentioned above.
5.2 and Fig.1 (Key Holes and Keys)	-	0	Testing charges for key holes and keys, Dimension of key holes and dimension of keys are Rs.1000/- already mentioned above.
5.2 and Fig.1 (Key Holes and Keys)	-	0	Testing charges for key holes and keys, Dimension of key holes and dimension of keys are Rs.1000/- already mentioned above.
5.2 and Fig.1 (Key Holes and Keys)	-	0	Testing charges for key holes and keys, Dimension of key holes and dimension of keys are Rs.1000/- already mentioned above.
5.2 and Fig.1 (Key Holes and Keys)	-	0	Testing charges for key holes and keys, Dimension of key holes and dimension of keys are Rs.1000/- already mentioned above.
5.2 and Fig.1 (Key Holes and Keys)	-	0	Testing charges for key holes and keys, Dimension of key holes and dimension of keys are Rs.1000/- already mentioned above.
5.2 and Fig.1 (Key Holes and Keys)	-	0	Testing charges for key holes and keys, Dimension of key holes and dimension of keys are Rs.1000/- already mentioned above.
5.2 and Fig.1 (Key Holes and Keys)	-	0	Testing charges for key holes and keys, Dimension of key holes and dimension of keys are Rs.1000/- already mentioned above.
5.2 and Fig.1 (Key Holes and Keys)	-	0	Testing charges for key holes and keys, Dimension of key holes and dimension of keys are Rs.1000/- already mentioned above.
5.2 and Fig.1 (Key Holes and Keys)	-	0	Testing charges for key holes and keys, Dimension of key holes and dimension of keys are Rs.1000/- already mentioned above.
5.2 and Fig.2(Key Holes and Keys )	-	0	Testing charges for key holes and keys, Dimension of key holes and dimension of keys are Rs.1000/- already mentioned above.
5.2 and Fig.2(Key Holes and Keys )	-	0	Testing charges for key holes and keys, Dimension of key holes and dimension of keys are Rs.1000/- already mentioned above.
5.2 and Fig.2(Key Holes and Keys )	-	0	Testing charges for key holes and keys, Dimension of key holes and dimension of keys are Rs.1000/- already mentioned above.
5.2 and Fig.2(Key Holes and Keys )	-	0	Testing charges for key holes and keys, Dimension of key holes and dimension of keys are Rs.1000/- already mentioned above.
5.2 and Fig.2(Key Holes and Keys )	-	0	Testing charges for key holes and keys, Dimension of key holes and dimension of keys are Rs.1000/- already mentioned above.
5.2 and Fig.2(Key Holes and Keys )	-	0	Testing charges for key holes and keys, Dimension of key holes and dimension of keys are Rs.1000/- already mentioned above.
5.3(Locking Devices)	-	500	-
6 and Table 1(PERFORMANCE REQUIREMENTS - Clear opening of frame O X O1)	-	2000	-
6 and Table 1(PERFORMANCE REQUIREMENTS - fd)	-	0	Testing charges for Type/Shape of cover, Dimension clear opening in frame O,O1, Frame Depth Fd, fd, Frame sitting S, Test load, Weight , Manhole cover and frames are Rs.2000/-already mentioned above.
6 and Table 1(PERFORMANCE REQUIREMENTS - S)	-	0	Testing charges for Type/Shape of cover, Dimension clear opening in frame O,O1, Frame Depth Fd, fd, Frame sitting S, Test load, Weight , Manhole cover and frames are Rs.2000/-already mentioned above.
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - O)	-	1200	-
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - O1)	-	0	Testing charges for Dimensions outer in Frame F, F1, Dimensions inner in Frame f, f1, Thickness t/t1, Dimensions of Manhole cover, Outer C/C1, Thickness T/T1 and clearance are Rs.1200/-already mentioned above.
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - F)	-	0	Testing charges for Dimensions outer in Frame F, F1, Dimensions inner in Frame f, f1, Thickness t/t1, Dimensions of Manhole cover, Outer C/C1, Thickness T/T1 and clearance are Rs.1200/-already mentioned above.
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - F1)	-	0	Testing charges for Dimensions outer in Frame F, F1, Dimensions inner in Frame f, f1, Thickness t/t1, Dimensions of Manhole cover, Outer C/C1, Thickness T/T1 and clearance are Rs.1200/-already mentioned above.
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - f)	-	0	Testing charges for Dimensions outer in Frame F, F1, Dimensions inner in Frame f, f1, Thickness t/t1, Dimensions of Manhole cover, Outer C/C1, Thickness T/T1 and clearance are Rs.1200/-already mentioned above.
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - f1)	-	0	Testing charges for Dimensions outer in Frame F, F1, Dimensions inner in Frame f, f1, Thickness t/t1, Dimensions of Manhole cover, Outer C/C1, Thickness T/T1 and clearance are Rs.1200/-already mentioned above.
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - Fd)	-	0	Testing charges for Dimensions outer in Frame F, F1, Dimensions inner in Frame f, f1, Thickness t/t1, Dimensions of Manhole cover, Outer C/C1, Thickness T/T1 and clearance are Rs.1200/-already mentioned above.
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - fd)	-	0	Testing charges for Dimensions outer in Frame F, F1, Dimensions inner in Frame f, f1, Thickness t/t1, Dimensions of Manhole cover, Outer C/C1, Thickness T/T1 and clearance are Rs.1200/-already mentioned above.
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - S)	-	0	Testing charges for Dimensions outer in Frame F, F1, Dimensions inner in Frame f, f1, Thickness t/t1, Dimensions of Manhole cover, Outer C/C1, Thickness T/T1 and clearance are Rs.1200/-already mentioned above.
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - t)	-	0	Testing charges for Dimensions outer in Frame F, F1, Dimensions inner in Frame f, f1, Thickness t/t1, Dimensions of Manhole cover, Outer C/C1, Thickness T/T1 and clearance are Rs.1200/-already mentioned above.
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - t1)	-	0	Testing charges for Dimensions outer in Frame F, F1, Dimensions inner in Frame f, f1, Thickness t/t1, Dimensions of Manhole cover, Outer C/C1, Thickness T/T1 and clearance are Rs.1200/-already mentioned above.
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - C)	-	0	Testing charges for Dimensions outer in Frame F, F1, Dimensions inner in Frame f, f1, Thickness t/t1, Dimensions of Manhole cover, Outer C/C1, Thickness T/T1 and clearance are Rs.1200/-already mentioned above.
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - C1)	-	0	Testing charges for Dimensions outer in Frame F, F1, Dimensions inner in Frame f, f1, Thickness t/t1, Dimensions of Manhole cover, Outer C/C1, Thickness T/T1 and clearance are Rs.1200/-already mentioned above.
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - T)	-	0	Testing charges for Dimensions outer in Frame F, F1, Dimensions inner in Frame f, f1, Thickness t/t1, Dimensions of Manhole cover, Outer C/C1, Thickness T/T1 and clearance are Rs.1200/-already mentioned above.
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - T1)	-	0	Testing charges for Dimensions outer in Frame F, F1, Dimensions inner in Frame f, f1, Thickness t/t1, Dimensions of Manhole cover, Outer C/C1, Thickness T/T1 and clearance are Rs.1200/-already mentioned above.
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - Clearence (C1))	-	0	Testing charges for Dimensions outer in Frame F, F1, Dimensions inner in Frame f, f1, Thickness t/t1, Dimensions of Manhole cover, Outer C/C1, Thickness T/T1 and clearance are Rs.1200/-already mentioned above.
8(COATING - At 63˚C)	-	800	-
8(COATING - At 0˚C)	-	0	Testing charges already mentioned above.
10 and Table 3(LOAD TEST)	-	0	NA
3(GRADES )	-	0	As above
3(TYPES)	-	0	As above
5.1.1(Covers and Frames)	-	0	As above
5.1.2(Covers and Frames)	-	0	As above
5.1.2(The rise of the chequer)	-	0	As above
5.2(Key Holes and Keys)	-	0	As above
5.2 and Fig.1 (Key Holes and Keys)	-	0	As above
5.2 and Fig.1 (Key Holes and Keys)	-	0	As above
5.2 and Fig.1 (Key Holes and Keys)	-	0	As above
5.2 and Fig.1 (Key Holes and Keys)	-	0	As above
5.2 and Fig.1 (Key Holes and Keys)	-	0	As above
5.2 and Fig.1 (Key Holes and Keys)	-	0	As above
5.2 and Fig.1 (Key Holes and Keys)	-	0	As above
5.2 and Fig.1 (Key Holes and Keys)	-	0	As above
5.2 and Fig.1 (Key Holes and Keys)	-	0	As above
5.2 and Fig.1 (Key Holes and Keys)	-	0	As above
5.2 and Fig.1 (Key Holes and Keys)	-	0	As above
5.2 and Fig.1 (Key Holes and Keys)	-	0	As above
5.2 and Fig.1 (Key Holes and Keys)	-	0	As above
5.2 and Fig.1 (Key Holes and Keys)	-	0	As above
5.2 and Fig.1 (Key Holes and Keys)	-	0	As above
5.2 and Fig.1 (Key Holes and Keys)	-	0	As above
5.2 and Fig.1 (Key Holes and Keys)	-	0	As above
5.2 and Fig.1 (Key Holes and Keys)	-	0	As above
5.2 and Fig.1 (Key Holes and Keys)	-	0	As above
5.2 and Fig.1 (Key Holes and Keys)	-	0	As above
5.2 and Fig.1 (Key Holes and Keys)	-	0	As above
5.2 and Fig.2(Key Holes and Keys )	-	0	As above
5.2 and Fig.2(Key Holes and Keys )	-	0	As above
5.2 and Fig.2(Key Holes and Keys )	-	0	As above
5.2 and Fig.2(Key Holes and Keys )	-	0	As above
5.2 and Fig.2(Key Holes and Keys )	-	0	As above
5.2 and Fig.2(Key Holes and Keys )	-	0	As above
5.3(Locking Devices)	-	0	As above
6 and Table 1(PERFORMANCE REQUIREMENTS - Clear opening of frame O X O1)	-	0	As above
6 and Table 1(PERFORMANCE REQUIREMENTS - fd)	-	0	As above
6 and Table 1(PERFORMANCE REQUIREMENTS - S)	-	0	As above
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - O)	-	0	As above
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - O1)	-	0	As above
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - F)	-	0	As above
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - F1)	-	0	As above
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - f)	-	0	As above
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - f1)	-	0	As above
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - Fd)	-	0	As above
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - fd)	-	0	As above
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - S)	-	0	As above
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - t)	-	0	As above
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - t1)	-	0	As above
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - C)	-	0	As above
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - C1)	-	0	As above
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - T)	-	0	As above
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - T1)	-	0	As above
7 and Table 2 and Fig.3 to 9(DIMENSIONS OF MANHOLE COVERS AND FRAMES - Clearence (C1))	-	0	As above
8(COATING - At 63˚C)	-	0	As above
8(COATING - At 0˚C)	-	0	As above
10 and Table 3(LOAD TEST)	-	0	As above

31 Dec, 2026

-
Included w.e.f 23.12.2024

9179

NAWaL Analytical Labs India Private Limited, Hosur

6126416

IS 1659 (2004)

Block boards - Specification (Fourth Revision)

9500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.2.6(Spot test - Annexure L)	-	1000	+18 % GST Charges Extra
9.2.5(Modulus of elasticity - MINIMUM INDIVIDUAL - Annexure K)	-	500	+18 % GST Charges Extra
9.2.5(Modulus of elasticity - AVERAGE - Annexure K)	-	500	+18 % GST Charges Extra
9.2.5(Modulus of rupture - MINIMUM INDIVIDUAL - Annexure K)	-	500	+18 % GST Charges Extra
9.2.5(Modulus of rupture - AVERAGE - Annexure K)	-	500	+18 % GST Charges Extra
9.2.4(Mycological Test [for MR grade only] - Annexure J)	-	1000	+18 % GST Charges Extra
9.2.3(Adhesion of Plies - Annexure H)	-	500	+18 % GST Charges Extra
9.2.2 (Resistance to water - Annexure G, Annexure H [For MR Grade])	-	500	+18 % GST Charges Extra
9.2.2 (Resistance to water - Annexure G, Annexure H [For BWP grade])	-	1000	+18 % GST Charges Extra
9.2.1(Dimensional Changes caused by humidity Change in local planeness - Annexure F)	-	500	+18 % GST Charges Extra
9.2.1(Dimensional Changes caused by humidity - Delamination - Annexure F)	-	500	+18 % GST Charges Extra
9.2.1(Dimensional Changes caused by humidity - Change in thickness - at 40% RH - Annexure F)	-	500	+18 % GST Charges Extra
9.2.1(Dimensional Changes caused by humidity - Change in Thickness - at 90% RH - Annexure F)	-	500	+18 % GST Charges Extra
9.2.1(Dimensional Changes caused by humidity - Change in Length - at 40% RH - Annexure F)	-	500	+18 % GST Charges Extra
9.2.1(Dimensional Changes caused by humidity - Change in Length - at 90% RH - Annexure F)	-	500	+18 % GST Charges Extra
7.3(Dimensional Requirements - Variation in thickness - Annexure E)	-	0	+18 % GST Charges Extra
7.3(Dimensional Requirements - Squareness - Annexure D)	-	100	+18 % GST Charges Extra
7.3(Dimensional Requirements - Edge Straightness - Annexure D)	-	100	+18 % GST Charges Extra
7.3(Dimensional Requirements - Thickness - Annexure E)	-	100	+18 % GST Charges Extra
7.3(Dimensional Requirements - Width - 8.1.4)	-	100	+18 % GST Charges Extra
7.3(Dimensional Requirements - Length - 8.1.4)	-	100	+18 % GST Charges Extra
8.1.3, 6.3.3, IS 1328(Visual Inspection - Permissible Defects - IS 1328 [test method for DECORATIVE type])	-	0	+18 % GST Charges Extra
8.1.3, 6.3.3, IS 303(Visual Inspection - Permissible Defects - IS 303 [test method for COMMERCIAL type])	-	0	+18 % GST Charges Extra
9.2.6 (mechanical)(Spot test - Annexure L)	-	0	+18 % GST Charges Extra

21 Mar, 2028

-
Included w.e.f 22.01.2025

9180

IDMA LABORATORIES LIMITED, PANCHKULA

9123236

IS 1254 (2007)

Corrugated aluminium sheet (Fourth Revision)

13500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(FREEDOM FROM DEFECTS)	-	500	-
4(SUPPLY OF MATERIAL)	-	0	NA
5(PROFILE)	-	1000	Testing charges for Uniformity of corrugation is Rs. 500/-
6(MATERIAL)	-	5100	Testing charges for Chemical composition ( Al, Cu, Mg, Si, Mn, Fe, Zn, Ti, Cr) are Rs.500/-each, Testing charges for Cu+Si+Fe+Mn+Zn, are Rs. 200/- Testing charges for Cu+Mg+Si+Fe+Mn+Zn are Rs. 200/ Testing charges for Cr+Mn are Rs.200 each)
7.2(WIDTH)	-	0	Total charges for Dimension and tolerances (Thickness, width, Length, Squareness, Depth and Pitch of corrugation ) are Rs.1500/-
7.3(LENGTH)	-	0	Testing charges for Dimension and tolerances (Thickness, width, Length, Squareness, Depth and Pitch of corrugation ) are Rs.1500/- already mentioned above.
7.4(SQUARENESS)	-	0	Testing charges for Dimension and tolerances (Thickness, width, Length, Squareness, Depth and Pitch of corrugation ) are Rs.1500/- already mentioned above.
7.5(Depth and Pitch of the Corrugation)	-	0	Testing charges for Dimension and tolerances (Thickness, width, Length, Squareness, Depth and Pitch of corrugation ) are Rs.1500/- already mentioned above.
8(FINISH)	-	500	-
9(MARKING)	-	0	Testing charges for Mechanical properties are Rs. 1200/- for 0.2% proof stress, Rs. 1000/- for Tensile strength, Rs. 1000/- for Elongation and Rs. 1200/- for Bend test.
3(FREEDOM FROM DEFECTS)	-	0	Testing charges already mentioned above
4(SUPPLY OF MATERIAL)	-	0	NA
5(PROFILE)	-	0	Testing charges already mentioned above
6(MATERIAL)	-	0	Testing charges already mentioned above
7.2(WIDTH)	-	0	Testing charges already mentioned above
7.3(LENGTH)	-	0	Testing charges already mentioned above
7.4(SQUARENESS)	-	0	Testing charges already mentioned above
7.5(Depth and Pitch of the Corrugation)	-	0	Testing charges already mentioned above
8(FINISH)	-	0	Testing charges already mentioned above
9(MARKING)	-	0	NA

31 Dec, 2026

-
Included w.e.f 23.12.2024

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number