BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15363 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

9211

BIS, Central Laboratory (CL)

None

IS 3309 (2022)

SOLUBLE COFFEE-CHICORY POWDER - SPECIFICATION (THIRD REVISION OF IS 3309)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Description-IS 3309)	-
3.2 (Chicory Content)	-
3.3 (Cup Test-2791)	-
3.4, Table 1 (i) (Moisture -IS 16029)	-
3.4, Table 1 (ii) (Caffeine Content (ODB) -IS 16028)	-
3.4, Table 1 (iv) (Solubility in boiling water-IS 2791)	-
3.4, Table 1 (v) (Solubility in cold water at 16 ± 2°C- IS 2791)	-

-
500 gm x 3

9212

DVG Laboratories & Consultants Pvt Ltd

8193306

IS 1489 (Part 1) (2015)

Portland pozzolana cement - Specification: Part 1 fly Ash Based

PPC – Fly ash based

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7 -Table 2- vi(Drying Shrinkage- IS 4031 Part 10)	-	2000	-
7 -Table 2- v(Transverse Strength - IS 4031 Part 8 (Optional))	-	2000	-
7 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	1500	-
7 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	1500	-
7 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	1500	-
7 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	1200	-
7 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	1200	-
7 -Table 2- ii- b(Expansion after aeration- 4031 Part 3)	-	1000	-
7 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	1000	-
7 -Table 2- ii- a(Expansion after aeration - 4031 Part 3)	-	1000	-
7 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	1000	-
7 -Table 2- i(Fineness 4031 Part 2)	-	1000	-
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	1000	-
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	800	-
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	800	-
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	1000	-
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	800	-
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	800	-
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	800	-
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	800	-
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	800	-
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	1000	-
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	800	-
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	800	-
7 -Table 2- vi(Drying Shrinkage- IS 4031 Part 10)	-	2000	-
7 -Table 2- v(Transverse Strength - IS 4031 Part 8 (Optional))	-	2000	-
7 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	1500	-
7 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	1500	-
7 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	1500	-
7 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	1200	-
7 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	1200	-
7 -Table 2- ii- b(Expansion after aeration- 4031 Part 3)	-	1000	-
7 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	1000	-
7 -Table 2- ii- a(Expansion after aeration - 4031 Part 3)	-	1000	-
7 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	1000	-
7 -Table 2- i(Fineness 4031 Part 2)	-	1000	-
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	1000	-
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	800	-
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	800	-
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	1000	-
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	800	-
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	800	-
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	1000	-
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	800	-
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	800	-
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	1000	-
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	800	-
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	800	-
Clause 7 Table 2 SI No. (v) (Compressive strength of Transverse Specimen, 672 ± 4 h)	-	1500	-
Clause 7 Table 2 SI No. (v) (Compressive strength of Transverse Specimen, 168 ± 2 h)	-	1500	-
Clause 7 Table 2 SI No. (v) (Compressive strength of Transverse Specimen, 72 ± 1 h)	-	1500	-
Clause 7 Table 2 SI No. (v) (Transverse Strength, 672 ± 4 h)	-	2000	-
Clause 7Table 2 SI No. (v)(Transverse Strength, 168 ± 2 h)	-	2000	-
Clause 7Table 2 SI No. (v)(Transverse Strength, 72 ± 1 h)	-	2000	-
11(Marking)	-	0	-
4(RAW MATERIAL)	-	0	-
11(MARKING)	-	0	-

10 Dec, 2028

-
Cl 7 -Table 2 Transverse Strength Test

9213

IDMA LABORATORIES LIMITED, PANCHKULA

9123236

IS 740 (1977)

Specification for wrought aluminium and aluminium alloy rivet stock for general engineering purposes (Second Revision)

Wrought Aluminum and Aluminum alloy

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1, Table 1of IS:740 (Designation & Condition 65032, 'W')(Tensile Strength of Size upto and including 25 mm)	-	1000	Total testing charges are Rs. 6000/-including chemical composition. Testing charges are Rs. 3000/-excluding chemical composition only. Testing charges are Rs. 3000/-for chemical composition only.
4.1, Table 1of IS:740 (Designation & Condition 64430, 'W')(Tensile Strength of Size upto and including 25 mm)	-	0	Testing charges for Cl.no.4.1 Table 1 Cu+Si+Fe+Mn+Zn are Rs.100/-
4.1, Table 1of IS:740 (Designation & Condition 55000, 'OD')(Tensile Strength of Size upto and including 25 mm)	-	0	NA
4.1, Table 1of IS:740 (Designation & Condition 55000, 'O or M')(Tensile Strength of Size upto and including 25 mm)	-	0	NA
4.1, Table 1of IS:740 (Designation & Condition 53000, 'OD')(Tensile Strength of Size upto and including 25 mm)	-	0	NA
4.1, Table 1of IS:740 (Designation & Condition 53000, 'O or M')(Tensile Strength of Size upto and including 25 mm)	-	0	NA
4.1, Table 1of IS:740 (Designation & Condition 24345, 'W')(Tensile Strength of Size upto and including 12 mm)	-	0	NA
4.1, Table 1of IS:740 (Designation & Condition 19000, '112')(Tensile Strength of Size upto and including 12 mm)	-	0	NA
4.1, Table 1of IS:740 (Designation 65032)(Aluminium)	-	300	-
4.1, Table 1of IS:740 (Designation 65032)(Either Cr or Mn shall present)	-	0	NA
4.1, Table 1of IS:740 (Designation 65032)(Chromium)	-	300	-
4.1, Table 1of IS:740 (Designation 65032)(Titanium and or other grain refining elements)	-	300	-
4.1, Table 1of IS:740 (Designation 65032)(Zinc)	-	300	-
4.1, Table 1of IS:740 (Designation 64430)(Cr+Mn)	-	100	-
4.1, Table 1of IS:740 (Designation 64430)(Chromium)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 64430)(Titanium and or other grain refining elements)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 64430)(Zinc)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 64430)(Manganese)	-	300	-
4.1, Table 1of IS:740 (Designation 64430)(Iron)	-	300	-
4.1, Table 1of IS:740 (Designation 64430)(Silicon)	-	300	-
4.1, Table 1of IS:740 (Designation 65032)(Manganese)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 65032)(Iron)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 65032)(Silicon)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 65032)(Magnesium)	-	300	-
4.1, Table 1of IS:740 (Designation 65032)(Copper)	-	300	-
4.1, Table 1of IS:740 (Designation 64430)(Aluminium)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 64430)(Magnesium)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 64430)(Copper)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 55000)(Aluminium)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 55000)(Cr+Mn)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 55000)(Chromium)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 55000)(Titanium and or other grain refining elements)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 55000)(Zinc)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 55000)(Manganese)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 55000)(Silicon)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 55000)(Magnesium)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 55000)(Copper)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 53000)(Aluminium)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 53000)(Cr+Mn)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 53000)(Chromium)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 53000)(Titanium and or other grain refining elements)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 53000)(Zinc)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 53000)(Manganese)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 53000)(Iron)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 53000)(Silicon)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 53000)(Magnesium)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 53000)(Copper)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 24345)(Aluminium)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 24345)(Chromium)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 24345)(Titanium and or other grain refining elements)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 24345)(Zinc)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 24345)(Manganese)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 24345)(Iron)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 24345)(Silicon)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 24345)(Magnesium)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 55000)(Iron)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 24345)(Copper)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 19000)(Cu+Mg+Si+Fe+Mn+Zn)	-	100	-
4.1, Table 1of IS:740 (Designation 19000)(Aluminium)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 19000)(Zinc)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 19000)(Manganese)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 19000)(Iron)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 19000)(Silicon)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 19000)(Magnesium)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 19000)(Copper)	-	0	Testing charges already mentioned above.
6(Freedom From Defects)	-	500	-
7(Dmension And Tolerances)	-	500	-
9.2(Head Forming Test)	-	1000	-
11(Marking)	-	0	NA
4.1, Table 1of IS:740 (Designation & Condition 65032, 'W')(Tensile Strength of Size upto and including 25 mm)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation & Condition 64430, 'W')(Tensile Strength of Size upto and including 25 mm)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation & Condition 55000, 'OD')(Tensile Strength of Size upto and including 25 mm)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation & Condition 55000, 'O or M')(Tensile Strength of Size upto and including 25 mm)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation & Condition 53000, 'OD')(Tensile Strength of Size upto and including 25 mm)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation & Condition 53000, 'O or M')(Tensile Strength of Size upto and including 25 mm)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation & Condition 24345, 'W')(Tensile Strength of Size upto and including 12 mm)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation & Condition 19000, '112')(Tensile Strength of Size upto and including 12 mm)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 65032)(Aluminium)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 65032)(Either Cr or Mn shall present)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 65032)(Chromium)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 65032)(Titanium and or other grain refining elements)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 65032)(Zinc)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 64430)(Cr+Mn)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 64430)(Chromium)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 64430)(Titanium and or other grain refining elements)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 64430)(Zinc)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 64430)(Manganese)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 64430)(Iron)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 64430)(Silicon)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 65032)(Manganese)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 65032)(Iron)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 65032)(Silicon)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 65032)(Magnesium)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 65032)(Copper)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 64430)(Aluminium)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 64430)(Magnesium)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 64430)(Copper)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 55000)(Aluminium)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 55000)(Cr+Mn)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 55000)(Chromium)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 55000)(Titanium and or other grain refining elements)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 55000)(Zinc)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 55000)(Manganese)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 55000)(Silicon)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 55000)(Magnesium)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 55000)(Copper)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 53000)(Aluminium)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 53000)(Cr+Mn)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 53000)(Chromium)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 53000)(Titanium and or other grain refining elements)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 53000)(Zinc)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 53000)(Manganese)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 53000)(Iron)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 53000)(Silicon)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 53000)(Magnesium)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 53000)(Copper)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 24345)(Aluminium)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 24345)(Chromium)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 24345)(Titanium and or other grain refining elements)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 24345)(Zinc)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 24345)(Manganese)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 24345)(Iron)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 24345)(Silicon)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 24345)(Magnesium)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 55000)(Iron)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 24345)(Copper)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 19000)(Cu+Mg+Si+Fe+Mn+Zn)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 19000)(Aluminium)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 19000)(Zinc)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 19000)(Manganese)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 19000)(Iron)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 19000)(Silicon)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 19000)(Magnesium)	-	0	Testing charges already mentioned above.
4.1, Table 1of IS:740 (Designation 19000)(Copper)	-	0	Testing charges already mentioned above.
6(Freedom From Defects)	-	0	Testing charges already mentioned above.
7(Dmension And Tolerances)	-	0	Testing charges already mentioned above.
9.2(Head Forming Test)	-	0	Testing charges already mentioned above.
11(Marking)	-	0	NA

31 Dec, 2026

-
Included w.e.f 22.01.2025

9214

TUV SUD SOUTH ASIA PRIVATE LIMITED, BENGALURU

6180126

IS 10322 : Part 5 : Sec 1 (2012)

Luminaires: Part 5 particular requirements: Sec 1 fixed general purpose luminaires (First Revision)

Fixed General Purpose luminaire

75000 View breakup
Rs.75,000/- (10% Discount)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Test Requireements)	-	2500	-
5(Classification of Luminaires')	-	2500	-
6.0(Marking)	-	3000	-
7.0(Construction)	-	3000	-
8.0(Creepage Distance and Clearances)	-	3500	-
9.0(Provision for earthing)	-	6000	-
10.0(Terminals)	-	7000	-
11.0(External & Internal Wiring)	-	7500	-
12.0(Protection against electric shock)	-	10000	-
13.0(Endurance Tests and Thermal Tests)	-	10000	-
14.0(Resistance to Dust & Moisture)	-	7000	-
15.0(Insulation Resistance and Electric Strength)	-	10000	-
16.0(Resistance to Heat , fire and tracking)	-	8000	-

11 Sep, 2027

-
Exclusion: Cl.4.24 (UV Radiation), Cl.4.11.6 (Electromechanical Contact), Cl.17 (Photometric test)

9215

IDMA LABORATORIES LIMITED, PANCHKULA

9123236

IS 2590 (1987)

Specification for primary aluminium ingots for remelting for general engineering purposes (Second Revision)

G-1, G-2, G-3, G-4

8600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(General requirements )	-	0	Total Testing Charges including chemical composition are Rs.8600/-. Testing Charges excluding chemical composition are Rs. 1000/- Testing Charges for chemical composition are Rs. 7600/-
4(Manufacture )	-	0	NA
5(Grades)	-	0	NA
6.1(Chemical composition )	-	1500	Testing Charges for Gallium, Titanium and Chromium are Rs. 500/-each.
7.1(Shapes and sizes)	-	1000	Testing charges for Shape, Size and weight are Rs.1000/-only.
9(Marking)	-	0	NA
Table-1, Clause - 6.1.1(Copper)	-	500	-
Table-1, Clause - 6.1.1(Iron)	-	500	-
Table-1, Clause - 6.1.1(Magnesium)	-	500	-
Table-1, Clause - 6.1.1(Manganese)	-	500	-
Table-1, Clause - 6.1.1(Titanium + Vanadium)	-	100	-
Table-1, Clause - 6.1.1(Silicon)	-	500	-
Table-1, Clause - 6.1.1(Vanadium)	-	500	-
Table-1, Clause - 6.1.1(Zinc)	-	500	-
Table-1, Clause - 6.1.1(Other elements (each))	-	1000	-
Table-1, Clause - 6.1.1(Others Total)	-	1000	-
Table-1, Clause - 6.1.1(Aluminium)	-	500	-

31 Dec, 2026

-
Included w.e.f 22.01.2025

9216

Ahmedabad Textile Industry's Research Association (ATIRA), Ahmedabad

7173002

IS 15742 (2007)

Textiles - Requirements for clothing made of limited flame spread materials and material assemblies affording protection against heat and flame - Specification

20800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1("Textile Materials- limited flame spread)	-	3300	-
Cl-4.2(Textile Material Assemblies)	-	0	-
Cl-4.4(Durability of Fire Retardant Property)	-	17500	-
4.2(Textile Material Assemblies)	-	0	-
5.3(Textlie material assemblies)	-	0	-
6(6 Procedures for durability for cleasing or wetting)	-	0	-
6.2.1(Standard wash procedure)	-	0	-
6.2.1(Water soaking)	-	0	-
6.2.1(6.2.1)	-	0	-
4.2(Textile Material Assemblies)	-	0	-
4.2(Textile Material Assemblies)	-	0	-
5.3(Textlie material assemblies)	-	0	-
6(6 Procedures for durability for cleasing or wetting)	-	0	-
6.2.1("(i) Cleansing procedure: 5 wash cycles as per IS 15370-6 A (40±3ºC) (A wash cycle is one wash and one drying). ")	-	0	-
6.2.1((i)12 wash cycles of one of the standard cleaning procedure)	-	0	-
6.2.2(five dry cleaning cycles)	-	0	-
7.1("Limited Flame Spread [IS 15758: 2007 (Part 4) ( Surface Ignition ) – Index-1 Before treatment After Pre-treatment ")	-	0	-
7.2("Limited Flame Spread [IS 15758: 2007 (Part 4) Procedure –A ( Surface Ignition ) – Limited Flame Spread Index-2 • Before treatment • After Pre-treatment as per clause 6.2.1 or 6.2.2 ")	-	0	-
7.3("Limited Flame Spread [IS 15758: 2007 (Part 4) Procedure –A ( Surface Ignition ) – Limited Flame Spread Index-3 • Before treatment • After Pre-treatment as per clause 6.2.1 or 6.2.2 ")	-	0	-
Cl-4.1("Textile Materials- limited flame spread)	-	0	-
Cl-4.2(Textile Material Assemblies)	-	0	-
Cl-4.4(Durability of Fire Retardant Property)	-	0	-
4.2(Textile Material Assemblies)	-	0	-
5.3(Textlie material assemblies)	-	0	-
6(6 Procedures for durability for cleasing or wetting)	-	0	-
6.2.1(Standard wash procedure)	-	0	-
6.2.1(Water soaking)	-	0	-
6.2.1(6.2.1)	-	0	-
4.2(Textile Material Assemblies)	-	0	-
4.2(Textile Material Assemblies)	-	0	-
5.3(Textlie material assemblies)	-	0	-
6(6 Procedures for durability for cleasing or wetting)	-	0	-
6.2.1("(i) Cleansing procedure: 5 wash cycles as per IS 15370-6 A (40±3ºC) (A wash cycle is one wash and one drying). ")	-	0	-
6.2.1((i)12 wash cycles of one of the standard cleaning procedure)	-	0	-
6.2.2(five dry cleaning cycles)	-	0	-
7.1("Limited Flame Spread [IS 15758: 2007 (Part 4) ( Surface Ignition ) – Index-1 Before treatment After Pre-treatment ")	-	0	-
7.2("Limited Flame Spread [IS 15758: 2007 (Part 4) Procedure –A ( Surface Ignition ) – Limited Flame Spread Index-2 • Before treatment • After Pre-treatment as per clause 6.2.1 or 6.2.2 ")	-	0	-
7.3("Limited Flame Spread [IS 15758: 2007 (Part 4) Procedure –A ( Surface Ignition ) – Limited Flame Spread Index-3 • Before treatment • After Pre-treatment as per clause 6.2.1 or 6.2.2 ")	-	0	-

-
-

9217

IDMA LABORATORIES LIMITED, PANCHKULA

9123236

IS 6754 (1972)

Specification for aluminium alloy ingots for bearings

Cast Alloys (8482,8328), Wrought Alloys(83428,89200)

9200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.1(General requirements)	-	0	Total testing charges Including chemical composition parameters are Rs.9200/- Total testing charges Excluding chemical composition parameters are Rs.2000/- only.
3.1(Manufacture)	-	0	Total testing charges for chemical composition parameters are Rs.7200/- only.
4.1(Chemical composition)	-	7200	Testing charges for chemical composition ( Al,Cu, Mg, Mn, Si, Fe, Zn, TI, Cr, Ni, Sn, are Rs. 600 Each. For Cu+Si+Fe+Mn+Zn , Cu+Mg+Si+Fe+Mn+Zn & Cr+Mn the testing charges are Rs. 200 each.
5.1(Shape and size)	-	1000	Testing charges for Shape, Size, Weight are Rs.1000/-
6(Freedom from Defects)	-	1000	-
7(Selection of Sample for chemical analysis)	-	0	NA
8(Retest)	-	0	NA
Table-1, Clause - 4.1(Copper)	-	0	Testing charges for chemical composition ( Al,Cu, Mg, Mn, Si, Fe, Zn, TI, Cr, Ni, Sn, are Rs. 600 Each. For Cu+Si+Fe+Mn+Zn , Cu+Mg+Si+Fe+Mn+Zn & Cr+Mn the testing charges are Rs. 200 each.
Table-1, Clause - 4.1(Magnesium)	-	0	Testing charges for chemical composition ( Al,Cu, Mg, Mn, Si, Fe, Zn, TI, Cr, Ni, Sn, are Rs. 600 Each. For Cu+Si+Fe+Mn+Zn , Cu+Mg+Si+Fe+Mn+Zn & Cr+Mn the testing charges are Rs. 200 each.
Table-1, Clause - 4.1(Manganese)	-	0	Testing charges for chemical composition ( Al,Cu, Mg, Mn, Si, Fe, Zn, TI, Cr, Ni, Sn, are Rs. 600 Each. For Cu+Si+Fe+Mn+Zn , Cu+Mg+Si+Fe+Mn+Zn & Cr+Mn the testing charges are Rs. 200 each.
Table-1, Clause - 4.1(Titanium)	-	0	NA
Table-1, Clause - 4.1(Silicon)	-	0	Testing charges for chemical composition ( Al,Cu, Mg, Mn, Si, Fe, Zn, TI, Cr, Ni, Sn, are Rs. 600 Each. For Cu+Si+Fe+Mn+Zn , Cu+Mg+Si+Fe+Mn+Zn & Cr+Mn the testing charges are Rs. 200 each.
Table-1, Clause - 4.1(Nickel)	-	0	Testing charges for chemical composition ( Al,Cu, Mg, Mn, Si, Fe, Zn, TI, Cr, Ni, Sn, are Rs. 600 Each. For Cu+Si+Fe+Mn+Zn , Cu+Mg+Si+Fe+Mn+Zn & Cr+Mn the testing charges are Rs. 200 each.
Table-1, Clause - 4.1(Tin)	-	0	Testing charges for chemical composition ( Al,Cu, Mg, Mn, Si, Fe, Zn, TI, Cr, Ni, Sn, are Rs. 600 Each. For Cu+Si+Fe+Mn+Zn , Cu+Mg+Si+Fe+Mn+Zn & Cr+Mn the testing charges are Rs. 200 each.
Table-1, Clause - 4.1(Other elements)	-	0	NA
Table-1, Clause - 4.1(Total of Fe+Si+Mn)	-	0	As Above. Testing charges for chemical composition Cu+Mg+Si+Fe+Mn+Zn, Cr+Mn are Rs. 200/- each.
Table-1, Clause - 4.1(Aluminium)	-	0	Testing charges for chemical composition ( Al,Cu, Mg, Mn, Si, Fe, Zn, TI, Cr, Ni, Sn, are Rs. 600 Each. For Cu+Si+Fe+Mn+Zn , Cu+Mg+Si+Fe+Mn+Zn & Cr+Mn the testing charges are Rs. 200 each.
9(Marking)	-	0	NA
2.1(General requirements)	-	0	NA
3.1(Manufacture)	-	0	NA
4.1(Chemical composition)	-	0	NA
5.1(Shape and size)	-	0	NA
6(Freedom from Defects)	-	0	NA
7(Selection of Sample for chemical analysis)	-	0	NA
8(Retest)	-	0	NA
Table-1, Clause - 4.1(Copper)	-	0	NA
Table-1, Clause - 4.1(Magnesium)	-	0	NA
Table-1, Clause - 4.1(Manganese)	-	0	NA
Table-1, Clause - 4.1(Titanium)	-	0	NA
Table-1, Clause - 4.1(Silicon)	-	0	NA
Table-1, Clause - 4.1(Nickel)	-	0	NA
Table-1, Clause - 4.1(Tin)	-	0	NA
Table-1, Clause - 4.1(Other elements)	-	0	NA
Table-1, Clause - 4.1(Total of Fe+Si+Mn)	-	0	NA
Table-1, Clause - 4.1(Aluminium)	-	0	NA
9(Marking)	-	0	NA
2.1(General requirements)	-	-	-
3.1(Manufacture)	-	-	-
4.1(Chemical composition)	-	-	-
5.1(Shape and size)	-	-	-
6(Freedom from Defects)	-	-	-
7(Selection of Sample for chemical analysis)	-	-	-
8(Retest)	-	-	-
Table-1, Clause - 4.1(Copper)	-	-	-
Table-1, Clause - 4.1(Magnesium)	-	-	-
Table-1, Clause - 4.1(Manganese)	-	-	-
Table-1, Clause - 4.1(Titanium)	-	-	-
Table-1, Clause - 4.1(Silicon)	-	-	-
Table-1, Clause - 4.1(Nickel)	-	-	-
Table-1, Clause - 4.1(Tin)	-	-	-
Table-1, Clause - 4.1(Other elements)	-	-	-
Table-1, Clause - 4.1(Total of Fe+Si+Mn)	-	-	-
Table-1, Clause - 4.1(Aluminium)	-	-	-
9(Marking)	-	-	-

31 Dec, 2026

-
Included w.e.f 22.01.2025

9218

IDMA LABORATORIES LIMITED, PANCHKULA

9123236

IS 739 (1992)

Wrought aluminium and aluminium alloys - Wire for general engineering purposes - Specification (Third Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Freedom from defects)	-	500	Total testing charges including chemical composition parameters are Rs.10000/- Testing charges for chemical composition parameters are Rs.5100/- Testing charges excluding chemical composition parameters are Rs.4900/-
7.0(Dimension and Tolerances)	-	1500	Testing charges for Dimension and Tolerances ( Diameter, width across flats of shaped wire, Width or thickness) are Rs. 1500/-
8.1 Table-1(Al)	-	500	Testing charges for Cu+Si+Fe+Mn+Zn are Rs.200/- Testing charges for Cu+Mg+Si+Fe+Mn+Zn are Rs.200/- Testing charges for Cr+Mn are Rs.200/-
8.1 Table-1(Cu)	-	500	-
8.1 Table-1(Mg)	-	500	-
8.1 Table-1(Si)	-	500	-
8.1 Table-1(Fe)	-	500	-
8.1 Table-1(Mn)	-	500	-
8.1 Table-1(Zn)	-	500	-
8.1 Table-1(Ti)	-	500	-
8.1 Table-1(Cr)	-	500	-
9.1(Tensile Strength)	-	1500	-
9.3(Wrapping Test)	-	1400	-
10(Selection of Test Samples)	-	0	NA

31 Dec, 2026

-
Included w.e.f 22.01.2025

9219

IDMA LABORATORIES LIMITED, PANCHKULA

9123236

IS 4026 (2023)

ALUMINIUM INGOTS BILLETS AND WIRE BARS EC GRADE

Ingots/billets/wire bars 1981, 1971,1961,1951

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8(SHAPES AND SIZES)	-	1000	Total testing charges are RS.6000/- Testing charges for chemical composition parameters are RS.5000/- Testing charges for shape, size and weight are RS.1000/-
9, Table 1, i)(Aluminium, Min)	-	300	Testing charges excluding chemical composition parameters are RS.1000/-
9, Table 1, ii)(Silicon)	-	300	-
9, Table 1, iii)(Iron)	-	300	-
9, Table 1, iv)(Copper)	-	300	-
9, Table 1, v)(Manganese)	-	300	-
9, Table 1, vi)(Magnesium)	-	300	-
9, Table 1, vii)(Chromium)	-	300	-
9, Table 1, ix)(Titanium)	-	300	-
9, Table 1, x)(Boron)	-	300	-
9, Table 1, xi)(Gallium)	-	300	-
9, Table 1, xii)(Zirconium)	-	300	-
9, Table 1, xiii)(Titanium + Vanadium)	-	300	-
9, Table 1, xiv)(Other elements (each))	-	550	-
9, Table 1, xv)(Other elements (Total))	-	550	-
9, Table 1, viii)(Zinc)	-	300	-

31 Dec, 2026

-
Included w.e.f 22.01.2025

9220

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 4412 (1981)

Specification for copper wires for general engineering purposes (First Revision)

17800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4(Chemical Composition)	-	1000	-
5.1(Tensile Test)	-	1000	-
5.2(Embrittlement Test)	-	1000	-
6(Freedom from defect)	-	1000	-
7.1(Diameter and Tolerances)	-	1000	-
Clause 4.1 ( Table -1)(Copper+Silver)	-	1000	-
Clause 4.1 ( Table -1)(phosphorus)	-	1000	-
Clause 4.1 ( Table -1)(Antimony)	-	1000	-
Clause 4.1 ( Table -1)(Arsenic)	-	1000	-
Clause 4.1 ( Table -1)(Bismuth)	-	1000	-
Clause 4.1 ( Table -1)(Iron)	-	1000	-
Clause 4.1 ( Table -1)(Lead)	-	1000	-
Clause 4.1 ( Table -1)(Nckel)	-	1000	-
Clause 4.1 ( Table -1)(Selenium+Tellurium)	-	1000	-
Clause 4.1 ( Table -1)(Tellurium)	-	1000	-
Clause 4.1 ( Table -1)(Tin)	-	1000	-
Clause 4.1 ( Table -1)(Total Impurities)	-	1700	-
Clause 4(Chemical Composition)	-	0	-
5.1(Tensile Test)	-	0	-
5.2(Embrittlement Test)	-	0	-
6(Freedom from defect)	-	0	-
7.1(Diameter and Tolerances)	-	0	-
Clause 4.1 ( Table -1)(Copper+Silver)	-	0	-
Clause 4.1 ( Table -1)(phosphorus)	-	0	-
Clause 4.1 ( Table -1)(Antimony)	-	0	-
Clause 4.1 ( Table -1)(Arsenic)	-	0	-
Clause 4.1 ( Table -1)(Bismuth)	-	0	-
Clause 4.1 ( Table -1)(Iron)	-	0	-
Clause 4.1 ( Table -1)(Lead)	-	0	-
Clause 4.1 ( Table -1)(Nckel)	-	0	-
Clause 4.1 ( Table -1)(Selenium+Tellurium)	-	0	-
Clause 4.1 ( Table -1)(Tellurium)	-	0	-
Clause 4.1 ( Table -1)(Tin)	-	0	-
Clause 4.1 ( Table -1)(Total Impurities)	-	0	-

-
-

9221

IDMA LABORATORIES LIMITED, PANCHKULA

9123236

IS 4171 (1983)

Specification for copper rods and bars for general engineering purposes (First Revision)

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4.1 Table 1(1. Copper, including silver, min)	-	500	Total testing charges are RS.12500/- including chemical composition parameters. Testing charges for chemical composition parameters are RS.5500/-only. Testing charges are Rs.7000/- Excluding chemical composition parameters.
Clause 4.1 Table 1(2. Tin, max)	-	500	Testing charges for Freedom from defect and Finish are Rs.500/-each. Testing charges for Radius on edge are Rs.1500/- Testing charges for IRON \|(Chemical Composition )are RS.500/-
Clause 4.1 Table 1(3. Lead, max)	-	500	-
Clause 4.1 Table 1(5. Nickel, max)	-	500	-
Clause 4.1 Table 1(6. Arsenic, max)	-	500	-
Clause 4.1 Table 1(7. Antimony, max)	-	500	-
Clause 4.1 Table 1(8. Bismuth, max)	-	500	-
Clause 4.1 Table 1(9. Phosphorus)	-	500	-
Clause 4.1 Table 1(10. Selenium and Tellurium, max)	-	500	-
5.1(Tensile Properties)	-	3000	Testing charges for Tensile Strength and Elongation are RS.1500/-each.
7.1(Dimension and Tolerances)	-	1500	Testing charges for (Dia.round rods and bars, square rods and bars, rectangular rods and bars, Hexagonal rods and bars, hot worked rods and bars, ) are Rs.1500/-
Clause 4.1 Table 1(11. Total impurities ( excluding silver, nickel and phosphorus ), max)	-	500	-

31 Dec, 2026

-
Included w.e.f 31.12.2025 Exclusion: Cl 5.2 (Hydrogen Embrittlement test)

9222

Spectro SSA Labs Private Limited

7190106

IS 269 (2015)

Ordinary portland cement - Specification (Sixth Revision)

OPC 33, 43, 43S, 53, 53S

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	1000	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	1000	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	1000	-
7 Table-3 iii b(Setting Time Final)	-	1000	-
7 Table-3 iii a(Setting Time Initial)	-	1000	-
7 Table-3 ii b(Expansion after aeration)	-	2000	-
7 Table-3 ii a(Expansion after aeration)	-	2000	-
7 Table-3 i.(Fineness)	-	1000	-
6.1 Table-2 viii(Alkali content)	-	1500	-
6.1 Table-2 vii(Chloride content)	-	1000	-
6.1 Table-2 vi(Loss on ignition)	-	1000	-
6.1 Table-2 v(Total Sulphur Content calculated as Sulphuric Anhydride)	-	1000	-
6.1 Table-2 iv(Magnesia)	-	1000	-
6.1 Table-2 iii.(Insoluble residue)	-	1000	-
6.1 Table-2 ii.(Ratio of percentage of alumina to that of iron oxide)	-	1000	-
6.1 Table-2 i.(Ratio of percentage of lime to percentage of silica, alumina and iron oxide)	-	1000	-
6 - Table - 1 viii(Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	1500	-
6 - Table - 1 vii(Chloride content - Cl 4.13 of IS 4032:1985)	-	1000	-
6 - Table - 1 v(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-	1000	-
6 - Table - 1 iv(Magnesia - Cl 4.8 of IS 4032:1985)	-	1000	-
6 - Table - 1 iii(Insoluble residue - Cl 4.10 of IS 4032:1985)	-	1000	-
6 - Table - 1 ii(Ratio of percentage of alumina to that of iron oxide - Cl 4 of IS 4032:1985)	-	1000	-
6 - Table - 1 i(Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-	1000	-
6 - Table - 1 vii(Chloride content - Cl 4.13 of IS 4032:1985)	-	1000	-
6 - Table - 1 vi(Loss on ignition - Cl 4.2 of IS 4032:1985)	-	1000	-
6.1 Table-2 viii(Alkali content)	-	1500	-
6.1 Table-2 vii(Chloride content)	-	1000	-
6.1 Table-2 vi(Loss on ignition)	-	1000	-
6.1 Table-2 v(Total Sulphur Content calculated as Sulphuric Anhydride)	-	1000	-
6.1 Table-2 iv(Magnesia)	-	1000	-
6.1 Table-2 iii.(Insoluble residue)	-	1000	-
6.1 Table-2 ii.(Ratio of percentage of alumina to that of iron oxide)	-	1000	-
6.1 Table-2 i.(Ratio of percentage of lime to percentage of silica, alumina and iron oxide)	-	1000	-
6 - Table - 1 viii( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	1500	-
6 - Table - 1 vi(Loss on ignition - Cl 4.2 of IS 4032:1985)	-	1000	-
6 - Table - 1 v(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-	1000	-
6 - Table - 1 iv(Magnesia - Cl 4.8 of IS 4032:1985)	-	1000	-
6 - Table - 1 iii(Insoluble residue - Cl 4.10 of IS 4032:1985)	-	1000	-
6 - Table - 1 ii(Ratio of percentage of alumina to that of iron oxide - Cl 4 of IS 4032:1985)	-	1000	-
6 - Table - 1 i(Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-	1000	-
6.1 Table-2 viii(Alkali content)	-	1500	-
6.1 Table-2 vii(Chloride content)	-	1000	-
6.1 Table-2 vi(Loss on ignition)	-	1000	-
6.1 Table-2 v(Total Sulphur Content calculated as Sulphuric Anhydride)	-	1000	-
6.1 Table-2 iv(Magnesia)	-	1000	-
6.1 Table-2 iii.(Insoluble residue)	-	1000	-
6.1 Table-2 ii.(Ratio of percentage of alumina to that of iron oxide)	-	1000	-
6.1 Table-2 i.(Ratio of percentage of lime to percentage of silica, alumina and iron oxide)	-	1000	-
6.1 Table-2 i.(Ratio of percentage of lime to percentage of silica, alumina and iron oxide)	-	1000	-
6.1 Table-2 ii.(Ratio of percentage of alumina to that of iron oxide)	-	1000	-
6.1 Table-2 iii.(Insoluble residue)	-	1000	-
6.1 Table-2 iv(Magnesia)	-	1000	-
6.1 Table-2 v(Total Sulphur Content calculated as Sulphuric Anhydride)	-	1000	-
6.1 Table-2 vi(Loss on ignition)	-	1000	-
6.1 Table-2 vii(Chloride content)	-	1000	-
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	1000	-
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	1000	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	1000	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	1000	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	1000	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	1000	-
7 Table-3 ii b(Expansion by Autoclave)	-	1000	-
7 Table-3 ii a(Expansion by Le Chatelier)	-	1000	-
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	1000	-
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	1000	-
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	1000	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	1000	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	1000	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	1000	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	1000	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	1000	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	1000	-
7 Table-3 iii b(Setting Time Final)	-	1000	-
7 Table-3 iii a(Setting Time Initial)	-	1000	-
7 Table-3 ii b(Expansion after aeration)	-	2000	-
7 Table-3 ii b(Expansion by Autoclave)	-	1000	-
7 Table-3 ii a(Expansion after aeration)	-	2000	-
7 Table-3 ii a(Expansion by Le Chatelier)	-	1000	-
7 Table-3 i.(Fineness)	-	0	-
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	1000	-
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	1000	-
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	1000	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	1000	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	1000	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	1000	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	0	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	1000	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	1000	-
7 Table-3 iii b(Setting Time Final)	-	1000	-
7 Table-3 iii a(Setting Time Initial)	-	1000	-
7 Table-3 ii b(Expansion after aeration)	-	2000	-
7 Table-3 ii b(Expansion by Autoclave)	-	1000	-
7 Table-3 ii a(Expansion after aeration)	-	1000	-
7 Table-3 ii a(Expansion by Le Chatelier)	-	1000	-
7 Table-3 i.(Fineness)	-	1000	-
7 Table-3 i.(Fineness)	-	1000	-
7 Table-3 ii a(Expansion by Le Chatelier)	-	1000	-
7 Table-3 ii a(Expansion after aeration)	-	2000	-
7 Table-3 ii b(Expansion by Autoclave)	-	1000	-
7 Table-3 ii b(Expansion after aeration)	-	2000	-
7 Table-3 iii a(Setting Time Initial)	-	1000	-
7 Table-3 iii b(Setting Time Final)	-	1000	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	1000	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	1000	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	1000	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	1000	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	1000	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	1000	-
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	1000	-
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	1000	-
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	1000	-

10 Nov, 2028

-
Transverse Strength-IS 4031 PART-8 (Optional)

9223

IDMA LABORATORIES LIMITED, PANCHKULA

9123236

IS 3843 (1995)

Steel back flap hinges -Specification

Light weight Hinges, Heavy weight Hinges

11400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5, 6, Table 1, Table 2(Dimensions)	-	0	Total testing charges Including material composition ( Flap and Pins) are RS. 11400/ Testing charges for all parameters excluding material composition are Rs.4200/-only.
Clause 4 Table 3(i)(Flap)	-	3600	Testing charges for material composition (Flap and Pin) are RS.7200/- per sample only. Testing charges for material composition for Flap ( C, Si, Mn S, T, V, Cu, Ti, Al, N, Ni, B) are Rs.3600/-
Clause 4 Table 3(ii)(Pin)	-	3600	Testing charges for material composition for Pin ( C, Si, Mn S, T, V, Cu, Ti, Al, N, Ni, B) are Rs.3600/-
Clause 5(Dimension and tolerance)	-	2100	Testing charges for Dimension and Tolerances ( Length A, Breadth, Thickness of Flap, Dia.of Hinges Pin, Width of Knuckles, No.of screw holes, Screw no. ) are Rs.2100/-
Clause 8(Marking)	-	0	Testing charges for Screw holes, Knuckles, Width of Knuckles (E), Position of Screw holes (X), (Y), (G), and Finish are RS.2100/-
Clause 9(Packing)	-	0	Testing charges for material composition (Flap or Pin) are RS.3600/- per sample

31 Dec, 2026

-
Included w.e.f 24.01.2025

9224

GUJARAT TEST HOUSE, AHMEDABAD

7109836

IS 2046 (1995)

Decorative thermosetting synthetic resinbonded laminated sheets specification (Second Revision)

HDS,HDF,HGS,HGP,HGF,VGS,VGP,VGF,VLS,CGS,CGF

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4 , Table 1(CLASSIFICATION)	-	500	-
5.1(Colour and Pattern)	-	500	-
5.2(Surface Finish)	-	500	-
5.2.2(Reverse side/Bonding)	-	500	-
5.3 ,Table 5(Thickness)	-	500	-
5.4(Appearance )	-	500	-
5.2.2(Sports, dirt and similar surface defects)	-	500	-
5.2.2(Fibres,hairs,scratches)	-	100	-
5.2.2(Accumulated(Combination)of surface defects)	-	100	-
5.2.2(Edge Defects)	-	100	-
5.2.2(Broken Corners )	-	100	-
5.4.4(Sanding Defects)	-	100	-
5.4.5 table 6(W arping (Flatness ))	-	100	-
5.4.6 (Length and width of a full size Laminate)	-	100	-
5.4.6 (Length and width of a full size Laminate)	-	100	-
5.4.7,Fig. 2(Staightness of Edges)	-	100	-
5.4.8, Fig.3(Squareness of the Laminates)	-	100	-
5.5, Tables 7, Sr No.(i) Annex C(Resistance to Surface wear)	-	100	-
5.5, Tables 7, Sr No.(ii) Annex D(Resistance to immersin in boiling water)	-	100	-
5.5, Tables 7, Sr No.(ii) Annex D(Resistance to immersin in boiling water)	-	100	-
5.5, Tables 7, Sr No.(ii) Annex D(Resistance to immersin in boiling water)	-	100	-
5.5, Tables 7, Sr No.(iii) Annex E(Resistance to Dry heat at 180 °C)	-	100	-
5.5, Tables 7, Sr No.(iv) Annex F(Dimensional Stability at deviated Temperature)	-	100	-
5.5, Tables 7, Sr No.(v) Annex G(Dimensional Stability at 20°C)	-	100	-
5.5, Tables 7, Sr No.(vi) Annex G(Resistance to impact by small diameter ball)	-	100	-
5.5, Tables 7, Sr No.(vii) Annex J(Resistance to impact by large diameter balls (self supporting compact laminates))	-	100	-
5.5, Tables 7, Sr No.(viii) Annex K(Resistance to cracking (thin laminates))	-	100	-
5.5, Tables 7, Sr No.(ix) Annex B & E(Resistance to scratching)	-	100	-
5.5, Tables 7, Sr No.(x) Annex -M(Resistance to staining)	-	100	-
5.5, Tables 7, Sr No.(x) Annex -N (alternative)(Resistance to colour change)	-	100	-
5.5, Tables 7, Sr No.(x) Annex -O (alternative)(Resistance to colour change)	-	100	-
5.5, Tables 7, Sr No.(xi) Annex -P (alternative)(Resistance to Cigarette burns)	-	100	-
5.5, Tables 7, Sr No.(xi) Annex -Q (alternative)(Resistance to Cigarette burns)	-	100	-
5.5, Tables 7, Sr No.(xi) Annex -R (Formability Method A)	-	100	-
5.5, Tables 7, Sr No.(xiv) Annex -R (Formability Method B)	-	100	-
5.5, Tables 7, Sr No.(xiv) Annex -S (Resistance to Blistering Method A)	-	100	-
5.5, Tables 7, Sr No.(xiv) Annex -S (Resistance to Blistering Method B)	-	100	-
5.5, Tables 7, Sr No.(xv) Annex -T (Resistance to steam)	-	100	-
5.5, Tables 7, Sr No.(xvi) Annex -N (Resistance to crazing (Thick laminates))	-	100	-
5.5, Tables 7, Sr No.(xvii) Annex -Y (Resistance to moisture (Double faced compact laminates))	-	100	-
5.5, Tables 7, Sr No.(xviii) Annex -F of IS 13401 (Flexural Modulus)	-	100	-
5.5, Tables 7, Sr No.(xix) Annex -F of IS 13401 (Flexural Strength)	-	100	-
5.5, Tables 7, Sr No.(xx) IS 8543 (Part4/Sec1) (Tensile Strength)	-	100	-
7.2 a)(Marking)	-	100	-
7.2 b)(Marking)	-	100	-
7.2 c)(Marking)	-	100	-
7.2 d)(Marking)	-	100	-
7.2.1(Marking)	-	100	-
5 & 5.1(Colour & Pattern)	-	100	-
5.2(Surface & Finish)	-	100	-
5.2.2(Reverse side Bonding)	-	100	-
5.3(Nominal thickness)	-	100	-
5.4.1.1(Surface defects)	-	100	-
5.4.1.2(Fiber hair scratches)	-	100	-
5.4.1.3(Accumulated(combinations) of surface defect)	-	100	-
5.4.2(Edge defect)	-	100	-
5.4.3(Broken corner)	-	100	-
5.4.4(Sanding defect)	-	100	-
5.4.5(Warping(Flatness))	-	100	-
5.4.6(Length)	-	100	-
5.4.6(Width)	-	100	-
5.4.7(Straightness of edge)	-	100	-
5.4.8(Squreness of laminate)	-	100	-
5.5Table-7(1(Surfacewear)	-	100	-
Table-7(2(Immesion in boiling water)	-	100	-
Table-7(3(Dry heat resistance)	-	100	-
Table-7(4(Dimensional stability)	-	100	-
Table-7(6(Impact by small dia.Ball)	-	1000	-
Table-7(7(Impact by large dia.Ball)	-	1000	-
Table-7(8(Cracking resistance)	-	200	-
Table-7(9(Scracting resistance)	-	200	-
Table-7(10(Staining resistance)	-	200	-
Table-7(10(Colour change(Xenon arc resis))	-	10000	-
Table-7(11(Cigarette burn resistance)	-	500	-
Table-7(12(Formability)	-	500	-
Table-7(13(Blistering)	-	500	-
Table-7(14(Steam resistance)	-	500	-
Table-7(15(Crazing reistance)	-	500	-
Table-7(16(Moisture reistance)	-	500	-
Table-8(17(Flexural Modulus)	-	500	-
Table-8(18(Flexural strength)	-	500	-
Table-8(19(Tensile strength)	-	500	-
4 , Table 1(CLASSIFICATION)	-	-	-
5.1(Colour and Pattern)	-	-	-
5.2(Surface Finish)	-	-	-
5.2.2(Reverse side/Bonding)	-	-	-
5.3 ,Table 5(Thickness)	-	-	-
5.4(Appearance )	-	-	-
5.2.2(Sports, dirt and similar surface defects)	-	-	-
5.2.2(Fibres,hairs,scratches)	-	-	-
5.2.2(Accumulated(Combination)of surface defects)	-	-	-
5.2.2(Edge Defects)	-	-	-
5.2.2(Broken Corners )	-	-	-
5.4.4(Sanding Defects)	-	-	-
5.4.5 table 6(W arping (Flatness ))	-	-	-
5.4.6 (Length and width of a full size Laminate)	-	-	-
5.4.6 (Length and width of a full size Laminate)	-	-	-
5.4.7,Fig. 2(Staightness of Edges)	-	-	-
5.4.8, Fig.3(Squareness of the Laminates)	-	-	-
5.5, Tables 7, Sr No.(i) Annex C(Resistance to Surface wear)	-	-	-
5.5, Tables 7, Sr No.(ii) Annex D(Resistance to immersin in boiling water)	-	-	-
5.5, Tables 7, Sr No.(ii) Annex D(Resistance to immersin in boiling water)	-	-	-
5.5, Tables 7, Sr No.(ii) Annex D(Resistance to immersin in boiling water)	-	-	-
5.5, Tables 7, Sr No.(iii) Annex E(Resistance to Dry heat at 180 °C)	-	-	-
5.5, Tables 7, Sr No.(iv) Annex F(Dimensional Stability at deviated Temperature)	-	-	-
5.5, Tables 7, Sr No.(v) Annex G(Dimensional Stability at 20°C)	-	-	-
5.5, Tables 7, Sr No.(vi) Annex G(Resistance to impact by small diameter ball)	-	-	-
5.5, Tables 7, Sr No.(vii) Annex J(Resistance to impact by large diameter balls (self supporting compact laminates))	-	-	-
5.5, Tables 7, Sr No.(viii) Annex K(Resistance to cracking (thin laminates))	-	-	-
5.5, Tables 7, Sr No.(ix) Annex B & E(Resistance to scratching)	-	-	-
5.5, Tables 7, Sr No.(x) Annex -M(Resistance to staining)	-	-	-
5.5, Tables 7, Sr No.(x) Annex -N (alternative)(Resistance to colour change)	-	-	-
5.5, Tables 7, Sr No.(x) Annex -O (alternative)(Resistance to colour change)	-	-	-
5.5, Tables 7, Sr No.(xi) Annex -P (alternative)(Resistance to Cigarette burns)	-	-	-
5.5, Tables 7, Sr No.(xi) Annex -Q (alternative)(Resistance to Cigarette burns)	-	-	-
5.5, Tables 7, Sr No.(xi) Annex -R (Formability Method A)	-	-	-
5.5, Tables 7, Sr No.(xiv) Annex -R (Formability Method B)	-	-	-
5.5, Tables 7, Sr No.(xiv) Annex -S (Resistance to Blistering Method A)	-	-	-
5.5, Tables 7, Sr No.(xiv) Annex -S (Resistance to Blistering Method B)	-	-	-
5.5, Tables 7, Sr No.(xv) Annex -T (Resistance to steam)	-	-	-
5.5, Tables 7, Sr No.(xvi) Annex -N (Resistance to crazing (Thick laminates))	-	-	-
5.5, Tables 7, Sr No.(xvii) Annex -Y (Resistance to moisture (Double faced compact laminates))	-	-	-
5.5, Tables 7, Sr No.(xviii) Annex -F of IS 13401 (Flexural Modulus)	-	-	-
5.5, Tables 7, Sr No.(xix) Annex -F of IS 13401 (Flexural Strength)	-	-	-
5.5, Tables 7, Sr No.(xx) IS 8543 (Part4/Sec1) (Tensile Strength)	-	-	-
7.2 a)(Marking)	-	-	-
7.2 b)(Marking)	-	-	-
7.2 c)(Marking)	-	-	-
7.2 d)(Marking)	-	-	-
7.2.1(Marking)	-	-	-
5 & 5.1(Colour & Pattern)	-	-	-
5.2(Surface & Finish)	-	-	-
5.2.2(Reverse side Bonding)	-	-	-
5.3(Nominal thickness)	-	-	-
5.4.1.1(Surface defects)	-	-	-
5.4.1.2(Fiber hair scratches)	-	-	-
5.4.1.3(Accumulated(combinations) of surface defect)	-	-	-
5.4.2(Edge defect)	-	-	-
5.4.3(Broken corner)	-	-	-
5.4.4(Sanding defect)	-	-	-
5.4.5(Warping(Flatness))	-	-	-
5.4.6(Length)	-	-	-
5.4.6(Width)	-	-	-
5.4.7(Straightness of edge)	-	-	-
5.4.8(Squreness of laminate)	-	-	-
5.5Table-7(1(Surfacewear)	-	-	-
Table-7(2(Immesion in boiling water)	-	-	-
Table-7(3(Dry heat resistance)	-	-	-
Table-7(4(Dimensional stability)	-	-	-
Table-7(6(Impact by small dia.Ball)	-	-	-
Table-7(7(Impact by large dia.Ball)	-	-	-
Table-7(8(Cracking resistance)	-	-	-
Table-7(9(Scracting resistance)	-	-	-
Table-7(10(Staining resistance)	-	-	-
Table-7(10(Colour change(Xenon arc resis))	-	-	-
Table-7(11(Cigarette burn resistance)	-	-	-
Table-7(12(Formability)	-	-	-
Table-7(13(Blistering)	-	-	-
Table-7(14(Steam resistance)	-	-	-
Table-7(15(Crazing reistance)	-	-	-
Table-7(16(Moisture reistance)	-	-	-
Table-8(17(Flexural Modulus)	-	-	-
Table-8(18(Flexural strength)	-	-	-
Table-8(19(Tensile strength)	-	-	-

15 Jul, 2027

-
-

9225

Plastics Woven Bag Testing Lab-Technical Training & Research Centre - TTRC

9187136

IS 9755 (2021)

Textiles - High Density Polyethylene (HDPE) / Polypropylene (pp) Woven Sacks for Packing Fertilizers

50 kg

16500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.6(Drop Impact Test)	-	500	-
4.1(Raw Meterial)	-	200	-
4.2("Fabric a) Width of Tape")	-	0	-
4.2("Fabric b) Linear Density")	-	0	-
4.2("Fabric c) Mesh")	-	200	-
4.2("Fabric c) Mesh")	-	200	-
4.2("Fabric d) Unlaminated Fabric Mass")	-	500	-
4.3(Sacks)	-	0	-
4.4.1(Loose Liner)	-	0	-
4.4.1(Thickness of Linear)	-	0	-
4.4.2(Visual Observation)	-	200	-
4.4.3(Bottom Seam of Loose Liner)	-	0	-
4.5(Mass of The Lamination)	-	0	-
4.5(Laminated Fabric)	-	0	-
4.5(Lamination Over Hang of the fabric after trimming)	-	0	-
4.6.1(Distance between the Two Row of Stitches)	-	0	-
4.6.1(Distance of outer stitch from the edge of the bag)	-	0	-
4.6.1(Depth of the Stitch( Double fold))	-	0	-
4.6.1(No.of Stitches/dm)	-	0	-
4.6.2(Breaking Load of the stitching material Non UV Stabilized sack)	-	8500	-
4.6.2(Breaking Load for UV Stabilized sack)	-	8500	-
4.7(Mouth of the Sack)	-	0	-
"Table 1 of Cl. No.5.1 Sl. No. i"("Dimension a) Inside Length Type 1 & Type 2 ")	-	200	-
"Table 1 of Cl. No.5.1 Sl. No. i"("Dimension b) Inside Width ")	-	200	-
"Table 1 of Cl. No.5.1 Sl. No. ii"(Ends/dm ( Type 1 & Type 2))	-	200	-
"Table 1 of Cl. No.5.1 Sl. No. iii"(Picks /dm ( Type 1 & Type 2))	-	200	-
"Table 1 of Cl. No.5.3 Sl. No. iv"("Mass of Fabric a) Unlaminated Sack( Type 1 & Type 2)")	-	500	-
"Table 1 of Cl. No.5.3 Sl. No. iv"("Mass of Fabric b) Laminated Sack( Type 1 & Type 2)")	-	500	-
"Table 1 of Cl. No.5.3 Sl. No. v"(Mass of Sack( Type 1 & Type 2))	-	500	-
"Table 1 of Cl. No.5.4 Sl. No. vi"(Avg. Breaking Strength Of fabric (Ravelled strip method)( 325mm X 25 mm))	-	1000	-
"Table 1 of Cl. No.5.4 Sl. No. vii"(Breaking Strength of Bottom Seam (Ravelled strip method))	-	1000	-
"Table 1 of Cl. No.5.1 Sl. No. viii"("Elongation at Break of fabric a)Length(Type 1 & Type 2)")	-	200	-
"Table 1 of Cl. No.5.1 Sl. No. viii"("Elongation at Break of fabric b) Width(Type 1 & Type 2)")	-	200	-
"Table 1 of Cl. No.5.5 Sl. No. ix"("Ash Content a) For UV Stabilized Sack")	-	800	-
"Table 1 of Cl. No.5.5 Sl. No. ix"("Ash Content b) For Non- UV Stabilized Sack")	-	800	-
"Table 1 of Cl. No.5.6 Sl. No. x"(Drop Impact Strength)	-	0	-
Cl. No.5.2(Visual Observation)	-	200	-
Cl. No.5.3(Mass of Bale)	-	0	-
Cl. No.5.4(Breaking Strength of Fabric)	-	1000	-
Cl. No.5.5("Ash Content a) For UV Stabilized Sack")	-	800	-
Cl. No.5.5("Ash Content a) For UV Stabilized Sack")	-	800	-
Cl. No.5.5("Ash Content b) For Non- UV Stabilized Sack")	-	800	-
Cl. No.5.6(Drop Impact testing of filled sack)	-	0	-
Cl. No.5.7(UV Resistance)	-	1000	-
Cl. No.6.1(Printing on Sacks)	-	0	-
Cl. No.6.2.(Packaging)	-	0	-
Cl. No.6.3.(Marking on the Bale)	-	0	-
Cl. No.6.4.(BIS Certification Marking)	-	0	-
Cl. No.6.5.(Storage)	-	0	-

29 Jul, 2028

-
-

9226

JBS TESTING SOLUTIONS (Unit-2) (24), Jalandhar

9172306

IS 8034 (2018)

Submersible pumpsets - Specification (Third Revision)

0.5 KW - 29 KW

5800 View breakup
upto 15Kw = Rs. 17,700/- Above 15Kw and upto 20Kw = Rs. 18,750/- Above 20Kw and upto 25Kw = Rs. 20,100/- Above 25Kw and upto 29Kw = Rs. 22,275/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1.1(Design features: Typical design features 0f components of pump)	-	500	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
7.1.2(Design features: Typical design features 0f components of pump)	-	500	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
7.1.3(Design features: Typical design features 0f components of pump)	-	500	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
7.1.4(Design features: Typical design features 0f components of pump)	-	500	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
7.1.5(Design features: Typical design features 0f components of pump)	-	500	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
7.1.6(Design features: Typical design features 0f components of pump)	-	500	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
8.5.1(Balancing)	-	2500	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
8.5.2(Balancing)	-	2500	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
11(Guarantee of Performance)	-	2500	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
11.1.1(Guarantee of Performance)	-	2500	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
11.1.2(Guarantee of Performance)	-	2500	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
11.1.3(Guarantee of Performance)	-	2500	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
11.1.4(Guarantee of Performance)	-	2500	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
11.1.5(Guarantee of Performance)	-	2500	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
8.4.1(Shaft)	-	1000	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
8.4.2(Shaft)	-	1000	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
14(Marking)	-	500	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
6.2 (a)(Material of construction Part Sub Assembly Shaft Sleeve)	-	500	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
6.2 (b)(Material of construction Part Sub Assembly Casing wear ring (if provided))	-	500	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
6.2 (c)(Material of construction Part Sub Assembly Bush)	-	500	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
6.1 (d)(Constructional Features)	-	500	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
6.1 (e)(Constructional Features)	-	500	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
6.2 (f)(Material of construction Part Sub Assembly Pump Bowl/Diffuser)	-	500	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
8.1(General Requirements)	-	500	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
6.2.2.1(Gaskets, Seals and Packings)	-	500	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
6.2.2.2(Gaskets, Seals and Packings)	-	500	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
6.2.3(Gaskets, Seals and Packings)	-	500	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
6.2.5(Gaskets, Seals and Packings)	-	500	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
12(Guarantee of workmanship and material)	-	500	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
8.5(Balancing of rotor)	-	1000	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
8.7(Direction of Rotation)	-	1000	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
9.10 (b)(High Voltage test)	-	1000	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
9.10 (c)(Measurement of Stator Resistance)	-	1000	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
9.10 (d)(No Load Test at Rated Voltage)	-	2500	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
9.10 (e)(Reduced voltage Running up test)	-	1000	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
9.10 (f) & (g)(Locked Rotor Test)	-	1000	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
9.10 (k)(Temperature rise test at reduced voltage)	-	1500	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
9.1(General)	-	500	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
8.2(Casing)	-	0	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
8.3(Impeller)	-	0	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
8.6(Submersible cable)	-	0	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
8.8(Terminal Marking)	-	0	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
8.9(Installation)	-	0	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
9.10 (h)(Leakage current test)	-	0	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
9.10 (j)(Temperature Rise Test at Rated Voltage)	-	0	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
10(Pump Performance test)	-	0	0.5 KW - 3.7 KW 5800/- 3.7KW -7.5KW 7500/- 7.5KW -11KW 9200/- 11KW -15KW 15,000/- 15.1 KW - 20 KW 17,700/- 20.1 KW - 25 KW 20,100/- 25.1 KW - 29 KW 22,275/-
8.2(Casing)	-	0	-
8.3(Impeller)	-	0	-
8.6(Submersible cable)	-	0	-
8.8(Terminal Marking)	-	0	-
8.9(Installation)	-	0	-
9.10 (h)(Leakage current test)	-	0	-
9.10 (j)(Temperature Rise Test at Rated Voltage)	-	0	-
10(Pump Performance test)	-	0	-

22 May, 2029

-
Exclusion: Cl 9.10 (m) Momentary over-load test

9227

JBS TESTING SOLUTIONS (Unit-2) (24), Jalandhar

9172306

IS 15658 (2021)

Concrete Paving Blocks - Specification ( First Revision )

M30, M35, M40, M50, M55

15800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 50 cycles)	-	7800	For complete dimension and qualitative tests
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 25 cycles)	-	7800	For complete dimension and qualitative tests
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 10 cycles)	-	7800	For complete dimension and qualitative tests
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Cumulative Weight losses of specimen after 10, 25 & 50 cycles)	-	7800	For complete dimension and qualitative tests
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 50 cycles)	-	7800	For complete dimension and qualitative tests
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 25 cycles)	-	7800	For complete dimension and qualitative tests
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 10 cycles)	-	7800	For complete dimension and qualitative tests
Clause 7.3, Annex G(Average Breaking Load)	-	2500	For Complete Tensile and Flexural
Clause 7.3, Annex G(Individual Breaking Load)	-	2500	For Complete Tensile and Flexural
Clause 7.3, Annex F(Average Failure Load per unit Length)	-	2500	For Complete Tensile and Flexural
Clause 7.3, Annex F(Individual Failure Load per unit Length)	-	2500	For Complete Tensile and Flexural
Clause 7.3 & 9.1.4, Table 3, SI No. (v) b)(Average Flexural strength )	-	2500	For Complete Tensile and Flexural
Clause 7.3 & 9.1.4, Table 3, SI No. (v) a)(Indivdual Flexural strength (i))	-	2500	For Complete Tensile and Flexural
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) b)(Average Tensile splitting strength )	-	2500	For Complete Tensile and Flexural
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) a)(Indivdual Tensile splitting strength (i))	-	2500	For Complete Tensile and Flexural
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) ii)(Wet Abrasion resistance (Average of three test specimens))	-	2000	For dry abrassion-2000 extra (if required, not included in complete testing charges)
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) i)( Indivdual Wet Abrasion Resistance )	-	2000	For dry abrassion-2000 extra (if required, not included in complete testing charges)
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) ii)(Dry Abrasion resistance (Average of three test specimens))	-	2000	For Dry abrassion
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) i)( Indivdual Dry Abrasion Resistance )	-	2000	For Dry abrassion
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) b)(Compressive strength (Average of eight test specimens))	-	1000	For Complete Compressive strength
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) a)(Indivdual Compressive strength (i))	-	1000	For Complete Compressive strength
Clause 7.3 & 9.1.4, Table 3, SI No. (i) b)(Water absorption (Average of three test specimens))	-	2500	For Complete Water absorption
Clause 7.3 & 9.1.4, Table 3, SI No. (i) a)( Indivdual Water absorption)	-	2500	For Complete Water absorption
Clause 7.2 & 9.1.3, Table 2, SI No. (ix)(Deviation from squareness)	-	7800	For complete dimension and qualitative tests
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Indivdual Ratio of wearing face area and Plan area (Asw/Asp))	-	7800	For complete dimension and qualitative tests
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Ratio of wearing face area and Plan area (Asw/Asp))	-	7800	For complete dimension and qualitative tests
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Indivdual Plan Area (Asp))	-	7800	For complete dimension and qualitative tests
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Plan Area (Asp))	-	7800	For complete dimension and qualitative tests
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Indivdual Thickness of wearing Layer)	-	7800	For complete dimension and qualitative tests
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Thickness of wearing Layer)	-	7800	For complete dimension and qualitative tests
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Depth)	-	7800	For complete dimension and qualitative tests
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Depth)	-	7800	For complete dimension and qualitative tests
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Width)	-	7800	For complete dimension and qualitative tests
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Width)	-	7800	For complete dimension and qualitative tests
Clause 7.2, Table No. 2, SI No. (iv) (Indivdual Aspect Ratio, L/Th)	-	7800	For complete dimension and qualitative tests
Clause 7.2, Table No. 2, SI No. (iv) (Aspect Ratio, L/Th)	-	7800	For complete dimension and qualitative tests
Clause 7.2, Table No. 2, SI No. (iii) (Indivdual Thickness, Th)	-	7800	For complete dimension and qualitative tests
Clause 7.2, Table No. 2, SI No. (iii) (Thickness, Th)	-	7800	For complete dimension and qualitative tests
Clause 7.2, Table No. 2, SI No. (ii) (Indivdual Length, L)	-	7800	For complete dimension and qualitative tests
Clause 7.2, Table No. 2, SI No. (ii) (Length, L)	-	7800	For complete dimension and qualitative tests
Clause 7.2, Table No. 2, SI No. (i) (Indivdual Width, W)	-	7800	For complete dimension and qualitative tests
Clause 7.2, Table No. 2, SI No. (i) (Width, W)	-	7800	For complete dimension and qualitative tests
Clause 6.3 (Bonding and Delamination between the layers of paver blocks)	-	7800	For complete dimension and qualitative tests
Clause 7.1.3 (Colour and Texture)	-	7800	For complete dimension and qualitative tests
Clauses 7.1.2 & 9.1.2 (Visual Inspection)	-	7800	For complete dimension and qualitative tests
Clause 7.1.1 (General Quality)	-	7800	For complete dimension and qualitative tests
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Individual Width - Lower)	-	7800	For complete dimension and qualitative tests
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Average Width -Lower)	-	7800	For complete dimension and qualitative tests
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Individual Width - Higher)	-	7800	For complete dimension and qualitative tests
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Average Width -Higher)	-	7800	For complete dimension and qualitative tests
Clause 3.20(Spacer nibs)	-	7800	For complete dimension and qualitative tests
10(Marking)	-	7800	For complete dimension and qualitative tests
cl.5(Cement)	-	0	-
5.2(Mineral Admixture)	-	0	-
5.3(Chemical Admixtures)	-	0	-
5.4(Coarse and Fine Aggregates)	-	0	-
5.5(Pigments)	-	0	-
5.6(Water)	-	0	-

22 May, 2029

-
Included w.e.f. 05-05-2024

9228

Central Power Research Institute (CPRI), Bangalore

6101024

IS 17048 (2018)

Halogen free flame retardant (HFFR) cables for working voltages up to and including 1 100 Volts - Specification

167970 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.1 a) (Conductor : Material )	-	0	-
4.1.1 b) (Material : Seperator tape )	-	0	-
4.1.1 d) , 11.1, 12.1, 13.1,14.1(Class of conductor )	-	0	-
4.1.1 e) (Shape of conductor )	-	0	-
4.1.1 f) (Nominal size of conductor )	-	0	-
4.2.1, 11.2, 12.2, 13.2, 14.2(Insulation : Material )	-	0	-
4.2.2, 11.2, 12.2, 13.2, 14.2(Insulation : Application )	-	0	-
4.2.3,11.2, 12.2, 13.2(Thickness of insulation - Avearge : IS 10810 ( Part 6 ))	-	1860	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
4.2.3, 11.2, 12.2, 13.2, 14.2(Thickness of insulation - miniumum : IS 10810 ( Part 6 ))	-	1860	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
4.2.4(Insulation : Tensile stregth ( Before ageing)-IS 10810 (Part 7) )	-	3610	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
4.2.4(Insulation : Elongation ( Before ageing) -IS 10810 (Part 7))	-	3610	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
4.2.4(Insulation : Tensile stregth ( After ageing) - IS 10810 (Part 7) )	-	3610	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
4.2.5(Insulation : Tensile stregth variation ( After ageing) - IS 10810 (Part 7) )	-	3610	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
4.2.4(Insulation : Elongation (after ageing) - IS 10810 (Part 7) )	-	3610	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
4.2.5(Insulation : Elongation variation (after ageing) - IS 10810 (Part 7) )	-	3610	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
4.3(Fillers)	-	0	-
4.4(Binder Tape)	-	0	-
4.5.1,13.4, 14.4(Sheath : Compound )	-	0	-
4.5.2, 13.4, 14.4(Sheath : Application)	-	0	-
4.5.3,13.4, 14.4(Thickness of sheath - Average : IS 10810 (Part 6))	-	1860	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
4.5.3,13.4, 14.4(Thickness of sheath - Minimum : IS 10810 (Part 6))	-	1860	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
4.5.4, 13.4(Sheath : Tensile stregth ( Before ageing)-IS 10810 (Part 7) )	-	3610	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
4.5.4,13.4(Sheath : Elongation ( Before ageing) -IS 10810 (Part 7))	-	3610	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
4.5.4, 13.4, 14.4(Sheath : Tensile stregth ( After ageing) - IS 10810 (Part 7) )	-	3610	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
4.5.5, 13.4, 14.4(Sheath : Tensile stregth variation ( After ageing) - IS 10810 (Part 7) )	-	3610	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
4.5.4, 13.4, 14.4(Sheath : Elongation (after ageing) - IS 10810 (Part 7) )	-	3610	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
4.5.5, 13.4,14.4(Sheath : Elongation variation (after ageing) - IS 10810 (Part 7) )	-	3610	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
4.5.5, 11.3, 12.3, 13.6, 14.6(Overall Dimensions)	-	1000	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
4.5.5.1, 11.3, 12.3,13.5, 14.5(Ovality)	-	0	-
4.5.6, 13.4(Colour of Sheath)	-	0	-
5.1(High Voltage Test (at Room Temperature))	-	1520	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
5.2(Spark Test (Routine Test))	-	1520	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
5.3(Flammability Test- IS 10810 (Part 53).)	-	1860	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
5.4(Oxygen Index Test- IS 10810 (Part 58))	-	9850	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
5.5(Temperature Index-IS 10810 (Part 64).)	-	11390	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
5.6(Smoke Density-IS 10810 (Part 63).)	-	12520	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
5.7(Assessment of Halogen- Table 1 of Annex D)	-	9900	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
5.1(Persulphate Test- IS 10810 (Part 4).)	-	3310	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
5.11(Flame Retardant Test- IS 10810 (Part 61),)	-	2680	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
5.12(Hot Set Test- IS 10810 (Part 30).)	-	2680	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
5.12(Permanent Set - IS 10810 (Part 30).)	-	2680	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
5.13(Water Immersion Test (Effect of Water on Sheath) : Tensile strength -IS 10810 (Part 7).)	-	6150	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
5.13(Water Immersion Test (Effect of Water on Sheath) : Elogation -IS 10810 (Part 7).)	-	6150	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
5.14(Ozone Resistance Test -IS 10810 (Part 13 ))	-	25000	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
5.15(Cold Bend Test-IS 10810 (Part 20).)	-	6610	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
5.16(Cold Impact Test- IS 10810 (Part 21).)	-	7420	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
6.1, Table 1(CORE IDENTIFICATION)	-	0	-
6.2(Core Identification by Numbers)	-	0	-
6.2.1(Preferred Arrangement of Marking)	-	0	-
6.2.2(Durability)	-	0	-
7.0(CABLE CODE)	-	0	-
9.0( IDENTIFICATION)	-	0	-
10.1(Packing )	-	0	-
10.2(marking)	-	0	-
10.2.1(Standards marking)	-	0	-
13.3, 14.3(assembly of cores )	-	0	-
6.1(General Requirements)	-	0	-
6.1.1(Colour Combination Green Yellow)	-	0	-
12.1(Conductor)	-	0	-
12.2, Table 4(insulation)	-	0	-
Table 4(Copper Purity test)	-	2680	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
4.3.1 (e)(Fluorine content test (Fillers))	-	22050	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
4.3.1 (d)(Presence of fluorine test (Fillers))	-	22050	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
4.3.1 (c)(Conductivity test (Fillers))	-	8040	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
4.3.1 (b)(pH test (Fillers))	-	8040	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
4.3.1 (a)(HCl test (Fillers))	-	9900	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
5.7 (a)(HCl test (Assessment of halogen test))	-	9900	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
5.7 (b)(pH test (Assessment of halogen test))	-	8040	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
5.7 (c)(Conductivity test (Assessment of halogen test))	-	8040	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
5.7 (d)(Presence of fluorine test (Assessment of halogen test))	-	0	-
5.7 (e)(Fluorine content test (Assessment of halogen test))	-	22050	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Table 2 ,( Clause 11.4, 12.4, 13.7 14.7 and 15.7 )(Insulation Resistance)	-	1770	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
"Table 2 ( Clause 11.4, 12.4, 13.7 14.7 and 15.7 )"(Conductor Resistance)	-	2680	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Table 2 , Clause .5.13(Water immersion test (Effect of water on sheath) - TS Variation of Sheath)	-	6150	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Table 2 , Clause 5.13(Water immersion test (Effect of water on sheath) - Elongation Variation of Sheath)	-	6150	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
"Table 2 ( Clause 11.4, 12.4, 13.7 14.7 and 15.7 )"(Hot Deformation)	-	2560	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Table 2, III.a.ii(Annealing test (for Cu, before stranding))	-	6150	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Table 2, II.a, b(Wrapping test before stranding (for Al))	-	590	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.

31 Dec, 2026

-
Included w.e.f. 13.09.2024

9229

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 2501 (1995)

Solid drawn copper tubesfor general engineering purposes - Specification (Third Revision)

24700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. No.5(Grades)	-	500	-
Cl. No.6(CONDITION)	-	500	-
Cl. No. 7(FREEDOM FROM DEFECTS)	-	500	-
Cl. No. 8.1(Dimensions)	-	1500	-
Cl. No. 8.2(Tolerances)	-	500	-
Cl. No. 9(CHEMICAL COMPOSITION)	-	2000	-
Cl. No. 10.1.1, Table no. 1(Tensile Test)	-	2000	-
Cl. No. 10.2(Flattening and Doubling-Over Test)	-	2000	-
Cl. No. 10.3(Drift Expanding Test)	-	2000	-
Cl. No. 10.4(Non-Destructive Testing)	-	2000	-
Cl. No. 10.5("Microscopic Examination ( for 0 Condition Only )")	-	2000	-
Cl. No. 13(Marking)	-	500	-
10.6(Hydrogen Embrittlement Test)	-	3500	-
Cl. No.5(Grades)	-	500	-
Cl. No.6(CONDITION)	-	500	-
Cl. No. 7(FREEDOM FROM DEFECTS)	-	500	-
Cl. No. 8.1(Dimensions)	-	1000	-
Cl. No. 8.2(Tolerances)	-	500	-
Cl. No. 9(CHEMICAL COMPOSITION)	-	1500	-
Cl. No. 10.1.1, Table no. 1(Tensile Test)	-	500	-
Cl. No. 10.2(Flattening and Doubling-Over Test)	-	0	-
Cl. No. 10.3(Drift Expanding Test)	-	0	-
Cl. No. 10.4(Non-Destructive Testing)	-	0	-
Cl. No. 10.5("Microscopic Examination ( for 0 Condition Only )")	-	0	-
Cl. No. 13(Marking)	-	0	-
10.6(Hydrogen Embrittlement Test)	-	0	-

-
-

9230

IDMA LABORATORIES LIMITED, PANCHKULA

9123236

IS 736 (1986)

Specification for wrought aluminium and aluminium alloy plate for general engineering purposes (Third Revision)

8900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Freedom from defect)	-	500	Total testing charges are RS.8900 including chemical composition. Testing charges for chemical composition parameters are Rs.4400/- only. Testing charges excluding chemical composition parameters are Rs.4500/ only.
5(chemical composition)	-	350	Testing charges for chemical composition (Cu+Si+Fe+Mn+Zn, Cu+Mg+Si+Fe+Mn+Zn, Cr+Mn) are Rs.350/-
6.1 table 2(0.2% proof strength)	-	1000	-
6.1 table 2(tensile strength)	-	1000	-
6.1 table 2(Elongation)	-	1000	-
8(Dimensions & Tolerances)	-	1000	Testing charges for Dimension and Tolerances (Length shearing tolerances, Width shearing Tolerances , Thickness, Squareness, Tolerance) are Rs.1000/-
5.1, Table 1(Aluminium)	-	450	-
5.1, Table 1(Copper)	-	450	-
5.1, Table 1(Magnesium)	-	450	-
5.1, Table 1(Silicon)	-	450	-
5.1, Table 1(Iron)	-	450	-
5.1, Table 1(Mangnese)	-	450	-
5.1, Table 1(Zinc)	-	450	-
5.1, Table 1(Titanium and /or other grain refining element)	-	450	-
5.1, Table 1(Chromium)	-	450	-
5.1, Table 1(Vanadium)	-	0	NA

31 Dec, 2026

-
Included w.e.f 24.01.2025

9231

DVG Laboratories & Consultants Pvt Ltd

8193306

IS 15658 (2021)

Concrete Paving Blocks - Specification ( First Revision )

M-30, M-35, M-40

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Cumulative Weight losses of specimen after 10, 25 & 50 cycles)	-	10000	optional testing
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) b)(Average Tensile splitting strength )	-	2000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) a)(Indivdual Tensile splitting strength (i))	-	2000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) ii)(Dry Abrasion resistance (Average of three test specimens))	-	3000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) i)( Indivdual Dry Abrasion Resistance )	-	3000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) b)(Compressive strength (Average of eight test specimens))	-	2000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) a)(Indivdual Compressive strength (i))	-	2000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (i) b)(Water absorption (Average of three test specimens))	-	1000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (i) a)( Indivdual Water absorption)	-	1000	-
Clause 7.2 & 9.1.3, Table 2, SI No. (ix)(Deviation from squareness)	-	1000	-
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Ratio of wearing face area and Plan area (Asw/Asp))	-	1000	-
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Indivdual Ratio of wearing face area and Plan area (Asw/Asp))	-	1000	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Indivdual Plan Area (Asp))	-	1000	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Plan Area (Asp))	-	1000	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Indivdual Thickness of wearing Layer)	-	1000	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Thickness of wearing Layer)	-	1000	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Depth)	-	1000	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Depth)	-	1000	-
Clause 7.2, Table No. 2, SI No. (iv) (Indivdual Aspect Ratio, L/Th)	-	1000	-
Clause 7.2, Table No. 2, SI No. (iv) (Aspect Ratio, L/Th)	-	1000	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Width)	-	1000	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Width)	-	1000	-
Clause 7.2, Table No. 2, SI No. (iii) (Indivdual Thickness, Th)	-	1000	-
Clause 7.2, Table No. 2, SI No. (iii) (Thickness, Th)	-	1000	-
Clause 7.2, Table No. 2, SI No. (ii) (Indivdual Length, L)	-	1000	-
Clause 7.2, Table No. 2, SI No. (ii) (Length, L)	-	1000	-
Clause 7.2, Table No. 2, SI No. (i) (Indivdual Width, W)	-	1000	-
Clause 7.2, Table No. 2, SI No. (i) (Width, W)	-	1000	-
Clause 7.1.3 (Colour and Texture)	-	1000	-
Clauses 7.1.2 & 9.1.2 (Visual Inspection)	-	1000	-
Clause 7.1.1 (General Quality)	-	1000	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Individual Width - Lower)	-	1000	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Average Width -Lower)	-	1000	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Individual Width - Higher)	-	1000	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Average Width -Higher)	-	1000	-
Clause 3.20(Spacer nibs)	-	0	-
10(Marking)	-	0	-
cl.5(Cement)	-	0	-
5.2(Mineral Admixture)	-	0	-
5.3(Chemical Admixtures)	-	0	-
5.4(Coarse and Fine Aggregates)	-	0	-
5.5(Pigments)	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 50 cycles)	-	10000	optional testing
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 25 cycles)	-	10000	optional testing
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 10 cycles)	-	10000	optional testing
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 50 cycles)	-	10000	optional testing
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 25 cycles)	-	10000	optional testing
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 10 cycles)	-	10000	optional testing
Clause 7.3, Annex G(Average Breaking Load)	-	2000	-
Clause 7.3, Annex G(Individual Breaking Load)	-	2000	-
Clause 7.3, Annex F(Average Failure Load per unit Length)	-	2000	-
Clause 7.3, Annex F(Individual Failure Load per unit Length)	-	2000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (v) b)(Average Flexural strength )	-	2000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (v) a)(Indivdual Flexural strength (i))	-	2000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) ii)(Wet Abrasion resistance (Average of three test specimens))	-	3000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) i)( Indivdual Wet Abrasion Resistance )	-	3000	-
Clause 6.3 (Bonding and Delamination between the layers of paver blocks)	-	0	-
5.6(Water)	-	0	-

10 Dec, 2028

-
-

9232

Umwelt Research Lab Private Limited, Pune

7175516

IS 14543 (2024)

Packaged Drinking Water Other than Packaged Natural Mineral Water Specification Third Revision

All

17500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2.1(Escherichia Coli)	-	305	-
5.2.2(Coliform)	-	305	-
5.2.3(Faecal Streptococci & Staphylococcus aureus)	-	305	-
5.2.4(Sulphite Reducing Anaerobes)	-	305	-
5.2.5(Pseudomonas aeruginosa)	-	305	-
5.2.6(Aerobic Microbial Count @ 22 o C & 37o C)	-	305	-
5.2.7(Yeast & Mould)	-	305	-
5.2.8(Salmonella & Shigella)	-	305	-
5.2.9(Vibrio Cholera & Vibrio parahaemolyicus)	-	305	-
5.3(Appearance)	-	100	-
5.3/Table 1/i(Colour)	-	100	-
5.3/Table 1/ii(Odour)	-	100	-
5.3/Table 1/iii(Taste)	-	100	-
5.3/Table 1/iv(Turbidity)	-	100	-
5.3/Table 1/v(Total Dissolved Solids)	-	100	-
5.3/Table 1/vi(pH)	-	100	-
5.3/Table 2/i(Barium)	-	100	-
5.3/Table 2/ii(Copper)	-	100	-
5.3/Table 2/iii(Iron)	-	100	-
5.3/Table 2/iv(Maganese)	-	100	-
5.3/Table 2/v(Nitrate)	-	100	-
5.3/Table 2/vi(Nitrite)	-	100	-
5.3/Table 2/vii(Fluoride)	-	100	-
5.3/Table 2/viii(Zinc)	-	100	-
5.3/Table 2/ix(Silver)	-	100	-
5.3/Table 2/x(Aluminium)	-	100	-
5.3/Table 2/xi(Chloride)	-	100	-
5.3/Table 2/xii(Selenium)	-	100	-
5.3/Table 2/xiii(Suphate)	-	100	-
5.3/Table 2/xiv(Alkalinity)	-	100	-
5.3/Table 2/xv(Calcium)	-	100	-
5.3/Table 2/xvi(Magnesium)	-	100	-
5.3/Table 2/xvii(Sodium)	-	100	-
5.3/Table 2/xviii(Residual Free Chlorine)	-	500	-
5.3/Table 2/xix(Phenolic Compounds)	-	100	-
5.3/Table 2/xx(Mineral Oil)	-	500	-
5.3/Table 2/xxi(Anionic Surface- Active Agents as MBAS)	-	100	-
5.3/Table 2/xxii(Sulphide)	-	100	-
5.3/Table 2/xxiii(Antinomy)	-	100	-
5.3/Table 2/xxiv(Borates)	-	100	-
5.3/Table 2/xxxv(Bromate)	-	1000	-
5.3/Table 3/i(Mercury)	-	200	-
5.3/Table 3/ii(Cadmium)	-	200	-
5.3/Table 3/iii(Arsenic)	-	200	-
5.3/Table 3/iv(Cyanide)	-	200	-
5.3/Table 3/v(Lead)	-	200	-
5.3/Table 3/vi(Chromium)	-	200	-
5.3/Table 3/vii(Nickel)	-	200	-
5.3/Table 3/viii(Polyclorinated biphenyl (PCB))	-	900	-
5.3/Table 3/ix(Polynuclear Aromatic Hydrocarbons)	-	900	-
5.3/Table 3/x(Uranium)	-	2000	-
5.4/Annex D/i(P,P-DDT)	-	129	-
5.4/Annex D/ii(Lindane)	-	129	-
5.4/Annex D/iv(b-Endosulfan)	-	129	-
5.4/Annex D/xvi(Dieldrin)	-	129	-
5.4/Annex D/xvi(Aldrin)	-	129	-
5.4/Annex D/i(O,P-DDT)	-	129	-
5.4/Annex D/iv(a-Endosulfan)	-	129	-
5.4/Annex D/iii(d-HCH)	-	129	-
5.4/Annex D/i(O,P-DDD)	-	129	-
5.4/Annex D/i(P,P-DDE)	-	129	-
5.4/Annex D/i(O,P-DDE)	-	129	-
5.4/Annex D/iii(a-HCH)	-	129	-
5.4/Annex D/iii(β- HCH)	-	129	-
5.4/Annex D/iv(Endosulfan sulfate)	-	129	-
5.4/Annex D/i(P,P-DDD)	-	129	-
5.4/Annex D/xii(Alachlor)	-	129	-
5.4/Annex D/vii(Chlorpyrifos)	-	129	-
5.4/Annex D/x(Butachlor)	-	129	-
5.4/Annex D/vi(Ethion)	-	129	-
5.4/Annex D/xiv(Methyl parathion)	-	129	-
5.4/Annex D/xv(Malathion)	-	129	-
5.4/Annex D/viii(Phorate)	-	129	-
5.4/Annex D/v(Monochrotophos)	-	129	-
5.4/Annex D/xiii(Atrazine)	-	129	-
5.4/Annex D/viii(Phorate sulphoxide)	-	129	-
5.4/Annex D/viii(Phorate sulfone)	-	129	-
5.4/Annex D/xxvii(Methyl paraoxon)	-	129	-
5.4/Annex D/xxviii(Malaoxon)	-	129	-
5.4/Annex D/xi(Isoproturon)	-	129	-
5.4/Annex D/ix(2,4 –D)	-	129	-
5.4/Annex D/xxxi(Total Pesticide Residue)	-	4000	-
Cl-5.2.1(Escherichia coli or thermotolerant bacteria)	-	305	-
Cl-5.1(General Requirements)	-	0	-
Cl-5.2.2(Coliform)	-	305	-
Cl-5.2.3(Staphylococcus aureus)	-	305	-
Cl-5.2.4(Sulphite Reducing Anaerobes)	-	305	-
Cl-5.2.5(Pseudomonas Aeruginosa)	-	305	-
Cl-5.2.6(Aerobic Microbial Count @ 37 deg C)	-	305	-
Cl-5.2.7(Yeast and mould)	-	305	-
Cl-5.2.8(Salmonella)	-	305	-
Cl-5.2.9(Vibrio cholera)	-	305	-
Cl-5.3, Table-1 (i)(Colour, true colour units, Max)	-	100	-
Cl-5.3, Table-1 (ii)(Odour)	-	100	-
Cl-5.3, Table-1 (iii)(Taste)	-	100	-
Cl-5.3, Table-1 (iv)(Turbidity, nephelometric turbidity unit (NTU), Max)	-	100	-
Cl-5.3, Table-1 (v)(Total dissolved solids, mg/l, Max)	-	100	-
Cl-5.3, Table-1 (vi)(pH)	-	100	-
Cl-5.3, Table-2 (i)(Barium (as Ba))	-	100	-
Cl-5.3, Table-2 (ii)(Copper (as Cu))	-	100	-
Cl-5.3, Table-2 (iii)(Iron (as Fe))	-	100	-
Cl-5.3, Table-2 (iv)(Manganese (as Mn))	-	100	-
Cl-5.3, Table-2 (v)(Nitrate (as NO3 ))	-	100	-
Cl-5.3, Table-2 (vi)(Nitrite (as NO2 ))	-	100	-
Cl-5.3, Table-2 (vii)(Fluoride (as F))	-	100	-
Cl-5.3, Table-2 (viii)(Zinc (as Zn))	-	100	-
Cl-5.3, Table-2 (ix)(Silver (as Ag))	-	100	-
Cl-5.3, Table-2 (x)(Aluminium (as A1))	-	100	-
Cl-5.3, Table-2 (xi)(Chloride (as Cl))	-	100	-
Cl-5.3, Table-2 (xii)(Selenium (as Se))	-	100	-
Cl-5.3, Table-2 (xiii)(Sulphate (as SO4 ))	-	100	-
Cl-5.3, Table-2 (xiv)(Alkalinity (as HCO3 ))	-	100	-
Cl-5.3, Table-2 (xv)(Calcium (as Ca))	-	100	-
Cl-5.3, Table-2 (xvi)(Magnesium (as Mg))	-	100	-
Cl-5.3, Table-2 (xvii)(Sodium (as Na))	-	100	-
Cl-5.3, Table-2 (xviii)(Residual free chlorine)	-	500	-
Cl-5.3, Table-2 (xix)(Phenolic compounds (as C6H5OH))	-	100	-
Cl-5.3, Table-2 (xx)(Mineral oil)	-	500	-
Cl-5.3, Table-2 (xxi)(Anionic surface active agents)	-	100	-
Cl-5.3, Table-2 (xxii)(Sulphide)	-	100	-
Cl-5.3, Table-2 (xxiii)(Antimony (as Sb))	-	100	-
Cl-5.3, Table-2 (xxiv)(Borates (as B))	-	100	-
Cl-5.3, Table-2 (xxv)(Bromates (as BrO3 ))	-	1000	-
Cl-5.3, Table-3 (i)(Mercury (as Hg))	-	200	-
Cl-5.3, Table-3 (ii)(Cadmium (as Cd))	-	200	-
Cl-5.3, Table-3 (iii)(Arsenic (as As))	-	200	-
Cl-5.3, Table-3 (iv)(Cyanide (as CN))	-	200	-
Cl-5.3, Table-3 (v)(Lead (as Pb))	-	200	-
Cl-5.3, Table-3 (vi)(Chromium (as Cr))	-	200	-
Cl-5.3, Table-3 (vii)(Nickel (as Ni))	-	200	-
Cl-5.3, Table-3 (viii)(Polychlorinated biphenyl (PCB))	-	900	-
Cl-5.3, Table-3 (ix)(Polynuclear aromatic hydrocarbons)	-	900	-
Cl-5.3, Table-3 (x)(Uranium)	-	2000	-
Cl-5.4 (i)(Pesticide residues considered individually)	-	4000	-
Cl-5.4 (ii)(Total pesticide residue)	-	4000	-
Cl-5.2.3(Faecal streptococci)	-	305	-
Cl-5.2.8(shigella)	-	305	-
Cl-5.2.9(V.parahaemolyticus)	-	305	-
5.2.1(Escherichia Coli)	-	0	-
5.2.2(Coliform)	-	0	-
5.2.3(Faecal Streptococci & Staphylococcus aureus)	-	0	-
5.2.4(Sulphite Reducing Anaerobes)	-	0	-
5.2.5(Pseudomonas aeruginosa)	-	0	-
5.2.6(Aerobic Microbial Count @ 22 o C & 37o C)	-	0	-
5.2.7(Yeast & Mould)	-	0	-
5.2.8(Salmonella & Shigella)	-	0	-
5.2.9(Vibrio Cholera & Vibrio parahaemolyicus)	-	0	-
5.3(Appearance)	-	0	-
5.3/Table 1/i(Colour)	-	0	-
5.3/Table 1/ii(Odour)	-	0	-
5.3/Table 1/iii(Taste)	-	0	-
5.3/Table 1/iv(Turbidity)	-	0	-
5.3/Table 1/v(Total Dissolved Solids)	-	0	-
5.3/Table 1/vi(pH)	-	0	-
5.3/Table 2/i(Barium)	-	0	-
5.3/Table 2/ii(Copper)	-	0	-
5.3/Table 2/iii(Iron)	-	0	-
5.3/Table 2/iv(Maganese)	-	0	-
5.3/Table 2/v(Nitrate)	-	0	-
5.3/Table 2/vi(Nitrite)	-	0	-
5.3/Table 2/vii(Fluoride)	-	0	-
5.3/Table 2/viii(Zinc)	-	0	-
5.3/Table 2/ix(Silver)	-	0	-
5.3/Table 2/x(Aluminium)	-	0	-
5.3/Table 2/xi(Chloride)	-	0	-
5.3/Table 2/xii(Selenium)	-	0	-
5.3/Table 2/xiii(Suphate)	-	0	-
5.3/Table 2/xiv(Alkalinity)	-	0	-
5.3/Table 2/xv(Calcium)	-	0	-
5.3/Table 2/xvi(Magnesium)	-	0	-
5.3/Table 2/xvii(Sodium)	-	0	-
5.3/Table 2/xviii(Residual Free Chlorine)	-	0	-
5.3/Table 2/xix(Phenolic Compounds)	-	0	-
5.3/Table 2/xx(Mineral Oil)	-	0	-
5.3/Table 2/xxi(Anionic Surface- Active Agents as MBAS)	-	0	-
5.3/Table 2/xxii(Sulphide)	-	0	-
5.3/Table 2/xxiii(Antinomy)	-	0	-
5.3/Table 2/xxiv(Borates)	-	0	-
5.3/Table 2/xxxv(Bromate)	-	0	-
5.3/Table 3/i(Mercury)	-	0	-
5.3/Table 3/ii(Cadmium)	-	0	-
5.3/Table 3/iii(Arsenic)	-	0	-
5.3/Table 3/iv(Cyanide)	-	0	-
5.3/Table 3/v(Lead)	-	0	-
5.3/Table 3/vi(Chromium)	-	0	-
5.3/Table 3/vii(Nickel)	-	0	-
5.3/Table 3/viii(Polyclorinated biphenyl (PCB))	-	0	-
5.3/Table 3/ix(Polynuclear Aromatic Hydrocarbons)	-	0	-
5.3/Table 3/x(Uranium)	-	0	-
5.4/Annex D/i(P,P-DDT)	-	0	-
5.4/Annex D/ii(Lindane)	-	0	-
5.4/Annex D/iv(b-Endosulfan)	-	0	-
5.4/Annex D/xvi(Dieldrin)	-	0	-
5.4/Annex D/xvi(Aldrin)	-	0	-
5.4/Annex D/i(O,P-DDT)	-	0	-
5.4/Annex D/iv(a-Endosulfan)	-	0	-
5.4/Annex D/iii(d-HCH)	-	0	-
5.4/Annex D/i(O,P-DDD)	-	0	-
5.4/Annex D/i(P,P-DDE)	-	0	-
5.4/Annex D/i(O,P-DDE)	-	0	-
5.4/Annex D/iii(a-HCH)	-	0	-
5.4/Annex D/iii(β- HCH)	-	0	-
5.4/Annex D/iv(Endosulfan sulfate)	-	0	-
5.4/Annex D/i(P,P-DDD)	-	0	-
5.4/Annex D/xii(Alachlor)	-	0	-
5.4/Annex D/vii(Chlorpyrifos)	-	0	-
5.4/Annex D/x(Butachlor)	-	0	-
5.4/Annex D/vi(Ethion)	-	0	-
5.4/Annex D/xiv(Methyl parathion)	-	0	-
5.4/Annex D/xv(Malathion)	-	0	-
5.4/Annex D/viii(Phorate)	-	0	-
5.4/Annex D/v(Monochrotophos)	-	0	-
5.4/Annex D/xiii(Atrazine)	-	0	-
5.4/Annex D/viii(Phorate sulphoxide)	-	0	-
5.4/Annex D/viii(Phorate sulfone)	-	0	-
5.4/Annex D/xxvii(Methyl paraoxon)	-	0	-
5.4/Annex D/xxviii(Malaoxon)	-	0	-
5.4/Annex D/xi(Isoproturon)	-	0	-
5.4/Annex D/ix(2,4 –D)	-	0	-
5.4/Annex D/xxxi(Total Pesticide Residue)	-	0	-
Cl-5.2.1(Escherichia coli or thermotolerant bacteria)	-	0	-
Cl-5.1(General Requirements)	-	0	-
Cl-5.2.2(Coliform)	-	0	-
Cl-5.2.3(Staphylococcus aureus)	-	0	-
Cl-5.2.4(Sulphite Reducing Anaerobes)	-	0	-
Cl-5.2.5(Pseudomonas Aeruginosa)	-	0	-
Cl-5.2.6(Aerobic Microbial Count @ 37 deg C)	-	0	-
Cl-5.2.7(Yeast and mould)	-	0	-
Cl-5.2.8(Salmonella)	-	0	-
Cl-5.2.9(Vibrio cholera)	-	0	-
Cl-5.3, Table-1 (i)(Colour, true colour units, Max)	-	0	-
Cl-5.3, Table-1 (ii)(Odour)	-	0	-
Cl-5.3, Table-1 (iii)(Taste)	-	0	-
Cl-5.3, Table-1 (iv)(Turbidity, nephelometric turbidity unit (NTU), Max)	-	0	-
Cl-5.3, Table-1 (v)(Total dissolved solids, mg/l, Max)	-	0	-
Cl-5.3, Table-1 (vi)(pH)	-	0	-
Cl-5.3, Table-2 (i)(Barium (as Ba))	-	0	-
Cl-5.3, Table-2 (ii)(Copper (as Cu))	-	0	-
Cl-5.3, Table-2 (iii)(Iron (as Fe))	-	0	-
Cl-5.3, Table-2 (iv)(Manganese (as Mn))	-	0	-
Cl-5.3, Table-2 (v)(Nitrate (as NO3 ))	-	0	-
Cl-5.3, Table-2 (vi)(Nitrite (as NO2 ))	-	0	-
Cl-5.3, Table-2 (vii)(Fluoride (as F))	-	0	-
Cl-5.3, Table-2 (viii)(Zinc (as Zn))	-	0	-
Cl-5.3, Table-2 (ix)(Silver (as Ag))	-	0	-
Cl-5.3, Table-2 (x)(Aluminium (as A1))	-	0	-
Cl-5.3, Table-2 (xi)(Chloride (as Cl))	-	0	-
Cl-5.3, Table-2 (xii)(Selenium (as Se))	-	0	-
Cl-5.3, Table-2 (xiii)(Sulphate (as SO4 ))	-	0	-
Cl-5.3, Table-2 (xiv)(Alkalinity (as HCO3 ))	-	0	-
Cl-5.3, Table-2 (xv)(Calcium (as Ca))	-	0	-
Cl-5.3, Table-2 (xvi)(Magnesium (as Mg))	-	0	-
Cl-5.3, Table-2 (xvii)(Sodium (as Na))	-	0	-
Cl-5.3, Table-2 (xviii)(Residual free chlorine)	-	0	-
Cl-5.3, Table-2 (xix)(Phenolic compounds (as C6H5OH))	-	0	-
Cl-5.3, Table-2 (xx)(Mineral oil)	-	0	-
Cl-5.3, Table-2 (xxi)(Anionic surface active agents)	-	0	-
Cl-5.3, Table-2 (xxii)(Sulphide)	-	0	-
Cl-5.3, Table-2 (xxiii)(Antimony (as Sb))	-	0	-
Cl-5.3, Table-2 (xxiv)(Borates (as B))	-	0	-
Cl-5.3, Table-2 (xxv)(Bromates (as BrO3 ))	-	0	-
Cl-5.3, Table-3 (i)(Mercury (as Hg))	-	0	-
Cl-5.3, Table-3 (ii)(Cadmium (as Cd))	-	0	-
Cl-5.3, Table-3 (iii)(Arsenic (as As))	-	0	-
Cl-5.3, Table-3 (iv)(Cyanide (as CN))	-	0	-
Cl-5.3, Table-3 (v)(Lead (as Pb))	-	0	-
Cl-5.3, Table-3 (vi)(Chromium (as Cr))	-	0	-
Cl-5.3, Table-3 (vii)(Nickel (as Ni))	-	0	-
Cl-5.3, Table-3 (viii)(Polychlorinated biphenyl (PCB))	-	0	-
Cl-5.3, Table-3 (ix)(Polynuclear aromatic hydrocarbons)	-	0	-
Cl-5.3, Table-3 (x)(Uranium)	-	0	-
Cl-5.4 (i)(Pesticide residues considered individually)	-	0	-
Cl-5.4 (ii)(Total pesticide residue)	-	0	-
Cl-5.2.3(Faecal streptococci)	-	0	-
Cl-5.2.8(shigella)	-	0	-
Cl-5.2.9(V.parahaemolyticus)	-	0	-
5.2.1(Escherichia Coli)	-	0	-
5.2.2(Coliform)	-	0	-
5.2.3(Faecal Streptococci & Staphylococcus aureus)	-	0	-
5.2.4(Sulphite Reducing Anaerobes)	-	0	-
5.2.5(Pseudomonas aeruginosa)	-	0	-
5.2.6(Aerobic Microbial Count @ 22 o C & 37o C)	-	0	-
5.2.7(Yeast & Mould)	-	0	-
5.2.8(Salmonella & Shigella)	-	0	-
5.2.9(Vibrio Cholera & Vibrio parahaemolyicus)	-	0	-
5.3(Appearance)	-	0	-
5.3/Table 1/i(Colour)	-	0	-
5.3/Table 1/ii(Odour)	-	0	-
5.3/Table 1/iii(Taste)	-	0	-
5.3/Table 1/iv(Turbidity)	-	0	-
5.3/Table 1/v(Total Dissolved Solids)	-	0	-
5.3/Table 1/vi(pH)	-	0	-
5.3/Table 2/i(Barium)	-	0	-
5.3/Table 2/ii(Copper)	-	0	-
5.3/Table 2/iii(Iron)	-	0	-
5.3/Table 2/iv(Maganese)	-	0	-
5.3/Table 2/v(Nitrate)	-	0	-
5.3/Table 2/vi(Nitrite)	-	0	-
5.3/Table 2/vii(Fluoride)	-	0	-
5.3/Table 2/viii(Zinc)	-	0	-
5.3/Table 2/ix(Silver)	-	0	-
5.3/Table 2/x(Aluminium)	-	0	-
5.3/Table 2/xi(Chloride)	-	0	-
5.3/Table 2/xii(Selenium)	-	0	-
5.3/Table 2/xiii(Suphate)	-	0	-
5.3/Table 2/xiv(Alkalinity)	-	0	-
5.3/Table 2/xv(Calcium)	-	0	-
5.3/Table 2/xvi(Magnesium)	-	0	-
5.3/Table 2/xvii(Sodium)	-	0	-
5.3/Table 2/xviii(Residual Free Chlorine)	-	0	-
5.3/Table 2/xix(Phenolic Compounds)	-	0	-
5.3/Table 2/xx(Mineral Oil)	-	0	-
5.3/Table 2/xxi(Anionic Surface- Active Agents as MBAS)	-	0	-
5.3/Table 2/xxii(Sulphide)	-	0	-
5.3/Table 2/xxiii(Antinomy)	-	0	-
5.3/Table 2/xxiv(Borates)	-	0	-
5.3/Table 2/xxxv(Bromate)	-	0	-
5.3/Table 3/i(Mercury)	-	0	-
5.3/Table 3/ii(Cadmium)	-	0	-
5.3/Table 3/iii(Arsenic)	-	0	-
5.3/Table 3/iv(Cyanide)	-	0	-
5.3/Table 3/v(Lead)	-	0	-
5.3/Table 3/vi(Chromium)	-	0	-
5.3/Table 3/vii(Nickel)	-	0	-
5.3/Table 3/viii(Polyclorinated biphenyl (PCB))	-	0	-
5.3/Table 3/ix(Polynuclear Aromatic Hydrocarbons)	-	0	-
5.3/Table 3/x(Uranium)	-	0	-
5.4/Annex D/i(P,P-DDT)	-	0	-
5.4/Annex D/ii(Lindane)	-	0	-
5.4/Annex D/iv(b-Endosulfan)	-	0	-
5.4/Annex D/xvi(Dieldrin)	-	0	-
5.4/Annex D/xvi(Aldrin)	-	0	-
5.4/Annex D/i(O,P-DDT)	-	0	-
5.4/Annex D/iv(a-Endosulfan)	-	0	-
5.4/Annex D/iii(d-HCH)	-	0	-
5.4/Annex D/i(O,P-DDD)	-	0	-
5.4/Annex D/i(P,P-DDE)	-	0	-
5.4/Annex D/i(O,P-DDE)	-	0	-
5.4/Annex D/iii(a-HCH)	-	0	-
5.4/Annex D/iii(β- HCH)	-	0	-
5.4/Annex D/iv(Endosulfan sulfate)	-	0	-
5.4/Annex D/i(P,P-DDD)	-	0	-
5.4/Annex D/xii(Alachlor)	-	0	-
5.4/Annex D/vii(Chlorpyrifos)	-	0	-
5.4/Annex D/x(Butachlor)	-	0	-
5.4/Annex D/vi(Ethion)	-	0	-
5.4/Annex D/xiv(Methyl parathion)	-	0	-
5.4/Annex D/xv(Malathion)	-	0	-
5.4/Annex D/viii(Phorate)	-	0	-
5.4/Annex D/v(Monochrotophos)	-	0	-
5.4/Annex D/xiii(Atrazine)	-	0	-
5.4/Annex D/viii(Phorate sulphoxide)	-	0	-
5.4/Annex D/viii(Phorate sulfone)	-	0	-
5.4/Annex D/xxvii(Methyl paraoxon)	-	0	-
5.4/Annex D/xxviii(Malaoxon)	-	0	-
5.4/Annex D/xi(Isoproturon)	-	0	-
5.4/Annex D/ix(2,4 –D)	-	0	-
5.4/Annex D/xxxi(Total Pesticide Residue)	-	0	-
Cl-5.2.1(Escherichia coli or thermotolerant bacteria)	-	0	-
Cl-5.1(General Requirements)	-	0	-
Cl-5.2.2(Coliform)	-	0	-
Cl-5.2.3(Staphylococcus aureus)	-	0	-
Cl-5.2.4(Sulphite Reducing Anaerobes)	-	0	-
Cl-5.2.5(Pseudomonas Aeruginosa)	-	0	-
Cl-5.2.6(Aerobic Microbial Count @ 37 deg C)	-	0	-
Cl-5.2.7(Yeast and mould)	-	0	-
Cl-5.2.8(Salmonella)	-	0	-
Cl-5.2.9(Vibrio cholera)	-	0	-
Cl-5.3, Table-1 (i)(Colour, true colour units, Max)	-	0	-
Cl-5.3, Table-1 (ii)(Odour)	-	0	-
Cl-5.3, Table-1 (iii)(Taste)	-	0	-
Cl-5.3, Table-1 (iv)(Turbidity, nephelometric turbidity unit (NTU), Max)	-	0	-
Cl-5.3, Table-1 (v)(Total dissolved solids, mg/l, Max)	-	0	-
Cl-5.3, Table-1 (vi)(pH)	-	0	-
Cl-5.3, Table-2 (i)(Barium (as Ba))	-	0	-
Cl-5.3, Table-2 (ii)(Copper (as Cu))	-	0	-
Cl-5.3, Table-2 (iii)(Iron (as Fe))	-	0	-
Cl-5.3, Table-2 (iv)(Manganese (as Mn))	-	0	-
Cl-5.3, Table-2 (v)(Nitrate (as NO3 ))	-	0	-
Cl-5.3, Table-2 (vi)(Nitrite (as NO2 ))	-	0	-
Cl-5.3, Table-2 (vii)(Fluoride (as F))	-	0	-
Cl-5.3, Table-2 (viii)(Zinc (as Zn))	-	0	-
Cl-5.3, Table-2 (ix)(Silver (as Ag))	-	0	-
Cl-5.3, Table-2 (x)(Aluminium (as A1))	-	0	-
Cl-5.3, Table-2 (xi)(Chloride (as Cl))	-	0	-
Cl-5.3, Table-2 (xii)(Selenium (as Se))	-	0	-
Cl-5.3, Table-2 (xiii)(Sulphate (as SO4 ))	-	0	-
Cl-5.3, Table-2 (xiv)(Alkalinity (as HCO3 ))	-	0	-
Cl-5.3, Table-2 (xv)(Calcium (as Ca))	-	0	-
Cl-5.3, Table-2 (xvi)(Magnesium (as Mg))	-	0	-
Cl-5.3, Table-2 (xvii)(Sodium (as Na))	-	0	-
Cl-5.3, Table-2 (xviii)(Residual free chlorine)	-	0	-
Cl-5.3, Table-2 (xix)(Phenolic compounds (as C6H5OH))	-	0	-
Cl-5.3, Table-2 (xx)(Mineral oil)	-	0	-
Cl-5.3, Table-2 (xxi)(Anionic surface active agents)	-	0	-
Cl-5.3, Table-2 (xxii)(Sulphide)	-	0	-
Cl-5.3, Table-2 (xxiii)(Antimony (as Sb))	-	0	-
Cl-5.3, Table-2 (xxiv)(Borates (as B))	-	0	-
Cl-5.3, Table-2 (xxv)(Bromates (as BrO3 ))	-	0	-
Cl-5.3, Table-3 (i)(Mercury (as Hg))	-	0	-
Cl-5.3, Table-3 (ii)(Cadmium (as Cd))	-	0	-
Cl-5.3, Table-3 (iii)(Arsenic (as As))	-	0	-
Cl-5.3, Table-3 (iv)(Cyanide (as CN))	-	0	-
Cl-5.3, Table-3 (v)(Lead (as Pb))	-	0	-
Cl-5.3, Table-3 (vi)(Chromium (as Cr))	-	0	-
Cl-5.3, Table-3 (vii)(Nickel (as Ni))	-	0	-
Cl-5.3, Table-3 (viii)(Polychlorinated biphenyl (PCB))	-	0	-
Cl-5.3, Table-3 (ix)(Polynuclear aromatic hydrocarbons)	-	0	-
Cl-5.3, Table-3 (x)(Uranium)	-	0	-
Cl-5.4 (i)(Pesticide residues considered individually)	-	0	-
Cl-5.4 (ii)(Total pesticide residue)	-	0	-
Cl-5.2.3(Faecal streptococci)	-	0	-
Cl-5.2.8(shigella)	-	0	-
Cl-5.2.9(V.parahaemolyticus)	-	0	-

26 Dec, 2026

-
Included w.e.f. 10.08.2024 Exclusion: Cl-5.3, Table-4 (i) (Alpha emitters, Becquerel (Bq/l)), Cl-5.3, Table-4 (ii) (Beta emitters, Becquerel (Bq/l),)

9233

WELL TECH TEST AND RESEARCH CENTER, DERABASSI

9177306

IS 988 (1959)

General requirements for optical components

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Surface Finish)	-	1000	REPEATED CLAUSE
4.2.1(Centering, Edging and Chamfering)	-	1000	REPEATED CLAUSE
4.3(Edge chips)	-	1000	REPEATED CLAUSE
4.4(Padding)	-	1000	REPEATED CLAUSE
4.7(Dimensions)	-	1000	REPEATED CLAUSE
4.8(Workmanship)	-	1000	REPEATED CLAUSE
4.9(Diagram of optical system)	-	1000	REPEATED CLAUSE
5.1(Lenses)	-	1000	REPEATED CLAUSE
5.2.1(Focal length)	-	1000	REPEATED CLAUSE
5.2.2(Back focal length)	-	1000	REPEATED CLAUSE
5.3(Aperture)	-	1000	REPEATED CLAUSE
5.4(Thickness)	-	1000	REPEATED CLAUSE
5.5(Figure)	-	1000	REPEATED CLAUSE
5.6(Definition)	-	1000	REPEATED CLAUSE
5.7 a(Cylindrical lens- Radius of curvature)	-	1000	REPEATED CLAUSE
5.7 b(Cylindrical lens- Axis of lens)	-	1000	REPEATED CLAUSE
5.7 c(Cylindrical lens- Power)	-	1000	REPEATED CLAUSE
5.8(Microscope objective-Numerical aperture)	-	1000	REPEATED CLAUSE
5.8(Microscope objective-Mechanical tube length)	-	1000	REPEATED CLAUSE
5.8(Microscope objective-Cover glass thickness)	-	1000	REPEATED CLAUSE
6.1.2(Prism angle)	-	1000	REPEATED CLAUSE
6.1.3(Pyramidal error)	-	1000	REPEATED CLAUSE
6.1.4(Roof angle)	-	1000	REPEATED CLAUSE
6.1.5(Parallelism of faces)	-	1000	REPEATED CLAUSE
6.1.7(Definiton)	-	1000	REPEATED CLAUSE
7.1(Surface defects)	-	1000	REPEATED CLAUSE
7.2(Adherence test)	-	1000	REPEATED CLAUSE
7.3(Radius of curvature)	-	1000	REPEATED CLAUSE
7.4(Definition (plane mirror))	-	1000	REPEATED CLAUSE
7.5(Temperature test)	-	1000	REPEATED CLAUSE
7.6(Corrosion test)	-	2000	REPEATED CLAUSE
7.8.2.1(Cleanability)	-	1000	REPEATED CLAUSE
7.8.2.2(Cleanability)	-	1000	REPEATED CLAUSE
7.8.3(Liability to stain)	-	1000	REPEATED CLAUSE
11.1(Marking)	-	1000	REPEATED CLAUSE
11.2(Marking)	-	1000	REPEATED CLAUSE
11.3(Marking)	-	1000	REPEATED CLAUSE
6.1.6(Equivalent optical path)	-	1000	REPEATED CLAUSE
4.1(Surface Finish)	-	1000	REPEATED CLAUSE
4.2.1(Centering, Edging and Chamfering)	-	1000	REPEATED CLAUSE
4.3(Edge chips)	-	1000	REPEATED CLAUSE
4.4(Padding)	-	1000	REPEATED CLAUSE
4.7(Dimensions)	-	1000	REPEATED CLAUSE
4.8(Workmanship)	-	1000	REPEATED CLAUSE
4.9(Diagram of optical system)	-	1000	REPEATED CLAUSE
5.1(Lenses)	-	1000	REPEATED CLAUSE
5.2.1(Focal length)	-	1000	REPEATED CLAUSE
5.2.2(Back focal length)	-	1000	REPEATED CLAUSE
5.3(Aperture)	-	1000	REPEATED CLAUSE
5.4(Thickness)	-	1000	REPEATED CLAUSE
5.5(Figure)	-	1000	REPEATED CLAUSE
5.6(Definition)	-	1000	REPEATED CLAUSE
5.7 a(Cylindrical lens- Radius of curvature)	-	1000	REPEATED CLAUSE
5.7 b(Cylindrical lens- Axis of lens)	-	1000	REPEATED CLAUSE
5.7 c(Cylindrical lens- Power)	-	1000	REPEATED CLAUSE
5.8(Microscope objective-Numerical aperture)	-	1000	REPEATED CLAUSE
5.8(Microscope objective-Mechanical tube length)	-	1000	REPEATED CLAUSE
5.8(Microscope objective-Cover glass thickness)	-	1000	REPEATED CLAUSE
6.1.2(Prism angle)	-	1000	REPEATED CLAUSE
6.1.3(Pyramidal error)	-	1000	REPEATED CLAUSE
6.1.4(Roof angle)	-	1000	REPEATED CLAUSE
6.1.5(Parallelism of faces)	-	1000	REPEATED CLAUSE
6.1.7(Definiton)	-	1000	REPEATED CLAUSE
7.1(Surface defects)	-	1000	REPEATED CLAUSE
7.2(Adherence test)	-	1000	REPEATED CLAUSE
7.3(Radius of curvature)	-	1000	REPEATED CLAUSE
7.4(Definition (plane mirror))	-	1000	REPEATED CLAUSE
7.5(Temperature test)	-	1000	REPEATED CLAUSE
7.6(Corrosion test)	-	1000	REPEATED CLAUSE
7.8.2.1(Cleanability)	-	1000	REPEATED CLAUSE
7.8.2.2(Cleanability)	-	1000	REPEATED CLAUSE
7.8.3(Liability to stain)	-	1000	REPEATED CLAUSE
11.1(Marking)	-	1000	REPEATED CLAUSE
11.2(Marking)	-	1000	REPEATED CLAUSE
11.3(Marking)	-	1000	REPEATED CLAUSE
6.1.6(Equivalent optical path)	-	1000	REPEATED CLAUSE

30 Mar, 2027

-
Included w.e.f. 10.07.2024 Exclusion: Scope restricted to tests applicable to microscopes.

9234

Atmy Analytical Labs Pvt. Ltd., Faridabad

8167506

IS 13428 (2024)

PACKAGED NATURAL MINERAL WATER - SPECIFICATION Third Revision

17500 View breakup
-

Clause No.	Exclusion	Remark
6.1.1(Escherichia coli)	-	-
6.1.2(Coliform)	-	-
6.1.3(Faecal Streptococci)	-	-
6.1.4(Sulphite Reducing Anaerobe)	-	-
6.1.5(Pseudomonas aeruginosa)	-	-
6.1.6(Yeast and moould)	-	-
6.1.7(Salmonella)	-	-
6.1.8(Vibrio Cholera)	-	-
6.2/Table 1/i(Colour)	-	-
6.2/Table 1/ii(Odour)	-	-
6.2/Table 1/iii(Taste)	-	-
6.2/Table 1/iv(Turbidity)	-	-
6.2/Table 1/v(Total Dissoved)	-	-
6.2/Table 1/vi(pH Value)	-	-
6.2/Table 2/i(Nitrate)	-	-
6.2/Table 2/ii(Nitrite)	-	-
6.2/Table 2/iii(Sulphide)	-	-
6.2/Table 2/iv(Manganese)	-	-
6.2/Table 2/v(Copper)	-	-
6.2/Table 2/vi(Fluoride)	-	-
6.2/Table 2/viii(Antimony)	-	-
6.2/Table 2/ix(Borate)	-	-
6.2/Table 2/x(Silver)	-	-
6.2/Table 2/xi(Chloride)	-	-
6.2/Table 2/xii(Sulphate)	-	-
6.2/Table 2/xiii(Magnesium)	-	-
6.2/Table 2/xiv(Calcium)	-	-
6.2/Table 2/xv(Sodium)	-	-
6.2/Table 2/xvi(Alkalinity)	-	-
6.2/Table 2/xvii(Selenium)	-	-
6.2/Table 2/xviii(Mineral Oil)	-	-
6.2/Table 2/xix(Phenolic Compounds)	-	-
6.2/Table 2/xx(Anionic Surface active agents)	-	-
6.2/Table 3/i(Arsenic)	-	-
6.2/Table 3/ii(Cadmium)	-	-
6.2/Table 3/iii(Cyanide)	-	-
6.2/Table 3/iv(Chromium)	-	-
6.2/Table 3/vii(Nickel)	-	-
6.2/Table 3/viii(Polychlorinated biphenyle (PCB))	-	-
6.2/Table 3/ix(Polynuclear aromatic hydrocarbons)	-	-
6.2/Table 3/x(Uranium)	-	-
Cl- 6.3, Annex N (i)(P,P -DDE)	-	-
Cl- 6.3, Annex N (i)(O,P -DDE)	-	-
Cl- 6.3, Annex N (i)(P,P- DDT)	-	-
Cl- 6.3, Annex N (i)(O,P -DDT)	-	-
Cl-6.3, Annex N (i)(P,P- DDD)	-	-
Cl-6.3, Annex N (i)(O,P-DDD)	-	-
Cl- 6.3, Annex N (ii)(γ-HCH (lindane))	-	-
Cl- 6.3, Annex N (iii)(α-HCH)	-	-
Cl- 6.3, Annex N (iii)(β-HCH)	-	-
Cl- 6.3, Annex N (iii)(δ - HCH)	-	-
Cl- 6.3, Annex N (iv)(Endosulfan - α)	-	-
Cl- 6.3, Annex N (iv)(Endosulfan - β)	-	-
Cl- 6.3, Annex N (iv)(Endosulfan - sulphate)	-	-
Cl- 6.3, Annex N (v)(Monocrotophos)	-	-
Cl- 6.3, Annex N (vi)(Ethion)	-	-
Cl- 6.3, Annex N (vii)(Chlorpyrifos)	-	-
Cl- 6.3, Annex N (viii)(Phorate and its oxygen analogue)	-	-
Cl- 6.3, Annex N (viii)(phorate sulphoxide)	-	-
Cl- 6.3, Annex N (viii)(phorate sulphone)	-	-
Cl- 6.3, Annex N (ix)(2,4-D)	-	-
Cl- 6.3, Annex N (x)(Butachlor)	-	-
Cl- 6.3, Annex N (xi)(Isoproturon)	-	-
Cl- 6.3, Annex N (xii)(Alachlor)	-	-
Cl- 6.3, Annex N (xiii)(Atrazine)	-	-
Cl- 6.3, Annex N (xiv)(Methyl parathion)	-	-
Cl- 6.3, Annex N (xiv)(Methyl paraoxon)	-	-
Cl- 6.3, Annex N (xv)(Malathion)	-	-
Cl- 6.3, Annex N (xv)(malaoxon)	-	-
Cl- 6.3, Annex N (xvi)(Aldrin)	-	-
6.2/Table 2/vii(Barium)	-	-
6.2/Table 3/v(Mercury)	-	-
6.2/Table 3/vi(Lead)	-	-
6.1.1(Escherichia coli)	-	-
6.1.2(Coliform)	-	-
6.1.3(Faecal Streptococci)	-	-
6.1.4(Sulphite Reducing Anaerobe)	-	-
6.1.5(Pseudomonas aeruginosa)	-	-
6.1.6(Yeast and moould)	-	-
6.1.7(Salmonella)	-	-
6.1.8(Vibrio Cholera)	-	-
6.2/Table 1/i(Colour)	-	-
6.2/Table 1/ii(Odour)	-	-
6.2/Table 1/iii(Taste)	-	-
6.2/Table 1/iv(Turbidity)	-	-
6.2/Table 1/v(Total Dissoved)	-	-
6.2/Table 1/vi(pH Value)	-	-
6.2/Table 2/i(Nitrate)	-	-
6.2/Table 2/ii(Nitrite)	-	-
6.2/Table 2/iii(Sulphide)	-	-
6.2/Table 2/iv(Manganese)	-	-
6.2/Table 2/v(Copper)	-	-
6.2/Table 2/vi(Fluoride)	-	-
6.2/Table 2/viii(Antimony)	-	-
6.2/Table 2/ix(Borate)	-	-
6.2/Table 2/x(Silver)	-	-
6.2/Table 2/xi(Chloride)	-	-
6.2/Table 2/xii(Sulphate)	-	-
6.2/Table 2/xiii(Magnesium)	-	-
6.2/Table 2/xiv(Calcium)	-	-
6.2/Table 2/xv(Sodium)	-	-
6.2/Table 2/xvi(Alkalinity)	-	-
6.2/Table 2/xvii(Selenium)	-	-
6.2/Table 2/xviii(Mineral Oil)	-	-
6.2/Table 2/xix(Phenolic Compounds)	-	-
6.2/Table 2/xx(Anionic Surface active agents)	-	-
6.2/Table 3/i(Arsenic)	-	-
6.2/Table 3/ii(Cadmium)	-	-
6.2/Table 3/iii(Cyanide)	-	-
6.2/Table 3/iv(Chromium)	-	-
6.2/Table 3/vii(Nickel)	-	-
6.2/Table 3/viii(Polychlorinated biphenyle (PCB))	-	-
6.2/Table 3/ix(Polynuclear aromatic hydrocarbons)	-	-
6.2/Table 3/x(Uranium)	-	-
Cl- 6.3, Annex N (i)(P,P -DDE)	-	-
Cl- 6.3, Annex N (i)(O,P -DDE)	-	-
Cl- 6.3, Annex N (i)(P,P- DDT)	-	-
Cl- 6.3, Annex N (i)(O,P -DDT)	-	-
Cl-6.3, Annex N (i)(P,P- DDD)	-	-
Cl-6.3, Annex N (i)(O,P-DDD)	-	-
Cl- 6.3, Annex N (ii)(γ-HCH (lindane))	-	-
Cl- 6.3, Annex N (iii)(α-HCH)	-	-
Cl- 6.3, Annex N (iii)(β-HCH)	-	-
Cl- 6.3, Annex N (iii)(δ - HCH)	-	-
Cl- 6.3, Annex N (iv)(Endosulfan - α)	-	-
Cl- 6.3, Annex N (iv)(Endosulfan - β)	-	-
Cl- 6.3, Annex N (iv)(Endosulfan - sulphate)	-	-
Cl- 6.3, Annex N (v)(Monocrotophos)	-	-
Cl- 6.3, Annex N (vi)(Ethion)	-	-
Cl- 6.3, Annex N (vii)(Chlorpyrifos)	-	-
Cl- 6.3, Annex N (viii)(Phorate and its oxygen analogue)	-	-
Cl- 6.3, Annex N (viii)(phorate sulphoxide)	-	-
Cl- 6.3, Annex N (viii)(phorate sulphone)	-	-
Cl- 6.3, Annex N (ix)(2,4-D)	-	-
Cl- 6.3, Annex N (x)(Butachlor)	-	-
Cl- 6.3, Annex N (xi)(Isoproturon)	-	-
Cl- 6.3, Annex N (xii)(Alachlor)	-	-
Cl- 6.3, Annex N (xiii)(Atrazine)	-	-
Cl- 6.3, Annex N (xiv)(Methyl parathion)	-	-
Cl- 6.3, Annex N (xiv)(Methyl paraoxon)	-	-
Cl- 6.3, Annex N (xv)(Malathion)	-	-
Cl- 6.3, Annex N (xv)(malaoxon)	-	-
Cl- 6.3, Annex N (xvi)(Aldrin)	-	-
6.2/Table 2/vii(Barium)	-	-
6.2/Table 3/v(Mercury)	-	-
6.2/Table 3/vi(Lead)	-	-
6.1.1(Escherichia coli)	-	-
6.1.2(Coliform)	-	-
6.1.3(Faecal Streptococci)	-	-
6.1.4(Sulphite Reducing Anaerobe)	-	-
6.1.5(Pseudomonas aeruginosa)	-	-
6.1.6(Yeast and moould)	-	-
6.1.7(Salmonella)	-	-
6.1.8(Vibrio Cholera)	-	-
6.2/Table 1/i(Colour)	-	-
6.2/Table 1/ii(Odour)	-	-
6.2/Table 1/iii(Taste)	-	-
6.2/Table 1/iv(Turbidity)	-	-
6.2/Table 1/v(Total Dissoved)	-	-
6.2/Table 1/vi(pH Value)	-	-
6.2/Table 2/i(Nitrate)	-	-
6.2/Table 2/ii(Nitrite)	-	-
6.2/Table 2/iii(Sulphide)	-	-
6.2/Table 2/iv(Manganese)	-	-
6.2/Table 2/v(Copper)	-	-
6.2/Table 2/vi(Fluoride)	-	-
6.2/Table 2/viii(Antimony)	-	-
6.2/Table 2/ix(Borate)	-	-
6.2/Table 2/x(Silver)	-	-
6.2/Table 2/xi(Chloride)	-	-
6.2/Table 2/xii(Sulphate)	-	-
6.2/Table 2/xiii(Magnesium)	-	-
6.2/Table 2/xiv(Calcium)	-	-
6.2/Table 2/xv(Sodium)	-	-
6.2/Table 2/xvi(Alkalinity)	-	-
6.2/Table 2/xvii(Selenium)	-	-
6.2/Table 2/xviii(Mineral Oil)	-	-
6.2/Table 2/xix(Phenolic Compounds)	-	-
6.2/Table 2/xx(Anionic Surface active agents)	-	-
6.2/Table 3/i(Arsenic)	-	-
6.2/Table 3/ii(Cadmium)	-	-
6.2/Table 3/iii(Cyanide)	-	-
6.2/Table 3/iv(Chromium)	-	-
6.2/Table 3/vii(Nickel)	-	-
6.2/Table 3/viii(Polychlorinated biphenyle (PCB))	-	-
6.2/Table 3/ix(Polynuclear aromatic hydrocarbons)	-	-
6.2/Table 3/x(Uranium)	-	-
Cl- 6.3, Annex N (i)(P,P -DDE)	-	-
Cl- 6.3, Annex N (i)(O,P -DDE)	-	-
Cl- 6.3, Annex N (i)(P,P- DDT)	-	-
Cl- 6.3, Annex N (i)(O,P -DDT)	-	-
Cl-6.3, Annex N (i)(P,P- DDD)	-	-
Cl-6.3, Annex N (i)(O,P-DDD)	-	-
Cl- 6.3, Annex N (ii)(γ-HCH (lindane))	-	-
Cl- 6.3, Annex N (iii)(α-HCH)	-	-
Cl- 6.3, Annex N (iii)(β-HCH)	-	-
Cl- 6.3, Annex N (iii)(δ - HCH)	-	-
Cl- 6.3, Annex N (iv)(Endosulfan - α)	-	-
Cl- 6.3, Annex N (iv)(Endosulfan - β)	-	-
Cl- 6.3, Annex N (iv)(Endosulfan - sulphate)	-	-
Cl- 6.3, Annex N (v)(Monocrotophos)	-	-
Cl- 6.3, Annex N (vi)(Ethion)	-	-
Cl- 6.3, Annex N (vii)(Chlorpyrifos)	-	-
Cl- 6.3, Annex N (viii)(Phorate and its oxygen analogue)	-	-
Cl- 6.3, Annex N (viii)(phorate sulphoxide)	-	-
Cl- 6.3, Annex N (viii)(phorate sulphone)	-	-
Cl- 6.3, Annex N (ix)(2,4-D)	-	-
Cl- 6.3, Annex N (x)(Butachlor)	-	-
Cl- 6.3, Annex N (xi)(Isoproturon)	-	-
Cl- 6.3, Annex N (xii)(Alachlor)	-	-
Cl- 6.3, Annex N (xiii)(Atrazine)	-	-
Cl- 6.3, Annex N (xiv)(Methyl parathion)	-	-
Cl- 6.3, Annex N (xiv)(Methyl paraoxon)	-	-
Cl- 6.3, Annex N (xv)(Malathion)	-	-
Cl- 6.3, Annex N (xv)(malaoxon)	-	-
Cl- 6.3, Annex N (xvi)(Aldrin)	-	-
6.2/Table 2/vii(Barium)	-	-
6.2/Table 3/v(Mercury)	-	-
6.2/Table 3/vi(Lead)	-	-
6.2/Table 4/i(Alpha emitters, Bq/l, Max)	-	-
6.2/Table 4/ii(Beta emitters, Bq/l, Max)	-	-
Cl-6.1.3(Staphylococcus aureus)	-	-
Cl-6.1.7(Shigella)	-	-
Cl-6.1.8(V. parahaemolyticus)	-	-
Cl-6.3, Annex N (XVI)(Dieldrin)	-	-
6.1.1(Escherichia coli)	-	-
6.1.2(Coliform)	-	-
6.1.3(Faecal Streptococci)	-	-
6.1.4(Sulphite Reducing Anaerobe)	-	-
6.1.5(Pseudomonas aeruginosa)	-	-
6.1.6(Yeast and moould)	-	-
6.1.7(Salmonella)	-	-
6.1.8(Vibrio Cholera)	-	-
6.2/Table 1/i(Colour)	-	-
6.2/Table 1/ii(Odour)	-	-
6.2/Table 1/iii(Taste)	-	-
6.2/Table 1/iv(Turbidity)	-	-
6.2/Table 1/v(Total Dissoved)	-	-
6.2/Table 1/vi(pH Value)	-	-
6.2/Table 2/i(Nitrate)	-	-
6.2/Table 2/ii(Nitrite)	-	-
6.2/Table 2/iii(Sulphide)	-	-
6.2/Table 2/iv(Manganese)	-	-
6.2/Table 2/v(Copper)	-	-
6.2/Table 2/vi(Fluoride)	-	-
6.2/Table 2/viii(Antimony)	-	-
6.2/Table 2/ix(Borate)	-	-
6.2/Table 2/x(Silver)	-	-
6.2/Table 2/xi(Chloride)	-	-
6.2/Table 2/xii(Sulphate)	-	-
6.2/Table 2/xiii(Magnesium)	-	-
6.2/Table 2/xiv(Calcium)	-	-
6.2/Table 2/xv(Sodium)	-	-
6.2/Table 2/xvi(Alkalinity)	-	-
6.2/Table 2/xvii(Selenium)	-	-
6.2/Table 2/xviii(Mineral Oil)	-	-
6.2/Table 2/xix(Phenolic Compounds)	-	-
6.2/Table 2/xx(Anionic Surface active agents)	-	-
6.2/Table 3/i(Arsenic)	-	-
6.2/Table 3/ii(Cadmium)	-	-
6.2/Table 3/iii(Cyanide)	-	-
6.2/Table 3/iv(Chromium)	-	-
6.2/Table 3/vii(Nickel)	-	-
6.2/Table 3/viii(Polychlorinated biphenyle (PCB))	-	-
6.2/Table 3/ix(Polynuclear aromatic hydrocarbons)	-	-
6.2/Table 3/x(Uranium)	-	-
Cl- 6.3, Annex N (i)(P,P -DDE)	-	-
Cl- 6.3, Annex N (i)(O,P -DDE)	-	-
Cl- 6.3, Annex N (i)(P,P- DDT)	-	-
Cl- 6.3, Annex N (i)(O,P -DDT)	-	-
Cl-6.3, Annex N (i)(P,P- DDD)	-	-
Cl-6.3, Annex N (i)(O,P-DDD)	-	-
Cl- 6.3, Annex N (ii)(γ-HCH (lindane))	-	-
Cl- 6.3, Annex N (iii)(α-HCH)	-	-
Cl- 6.3, Annex N (iii)(β-HCH)	-	-
Cl- 6.3, Annex N (iii)(δ - HCH)	-	-
Cl- 6.3, Annex N (iv)(Endosulfan - α)	-	-
Cl- 6.3, Annex N (iv)(Endosulfan - β)	-	-
Cl- 6.3, Annex N (iv)(Endosulfan - sulphate)	-	-
Cl- 6.3, Annex N (v)(Monocrotophos)	-	-
Cl- 6.3, Annex N (vi)(Ethion)	-	-
Cl- 6.3, Annex N (vii)(Chlorpyrifos)	-	-
Cl- 6.3, Annex N (viii)(Phorate and its oxygen analogue)	-	-
Cl- 6.3, Annex N (viii)(phorate sulphoxide)	-	-
Cl- 6.3, Annex N (viii)(phorate sulphone)	-	-
Cl- 6.3, Annex N (ix)(2,4-D)	-	-
Cl- 6.3, Annex N (x)(Butachlor)	-	-
Cl- 6.3, Annex N (xi)(Isoproturon)	-	-
Cl- 6.3, Annex N (xii)(Alachlor)	-	-
Cl- 6.3, Annex N (xiii)(Atrazine)	-	-
Cl- 6.3, Annex N (xiv)(Methyl parathion)	-	-
Cl- 6.3, Annex N (xiv)(Methyl paraoxon)	-	-
Cl- 6.3, Annex N (xv)(Malathion)	-	-
Cl- 6.3, Annex N (xv)(malaoxon)	-	-
Cl- 6.3, Annex N (xvi)(Aldrin)	-	-
6.2/Table 2/vii(Barium)	-	-
6.2/Table 3/v(Mercury)	-	-
6.2/Table 3/vi(Lead)	-	-
6.2/Table 4/i(Alpha emitters, Bq/l, Max)	-	-
6.2/Table 4/ii(Beta emitters, Bq/l, Max)	-	-
Cl-6.1.3(Staphylococcus aureus)	-	-
Cl-6.1.7(Shigella)	-	-
Cl-6.1.8(V. parahaemolyticus)	-	-
Cl-6.3, Annex N (XVI)(Dieldrin)	-	-

25 Feb, 2027

-
Exclusion: Cl.6.2/Table 4/i (Alpha emitters), Cl.6.2/Table 4/ii (Beta emitters)

9235

Cotecna Inspection India Private Limited, Gurugram

8166106

IS 17043 : Part 2 (2024)

Shoes: Shoes for General Purpose

65000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Shape and Design)	-	200	-
Cl-5.3(Material)	-	200	-
Cl-5.4, Table-1 (i)(Bond strength, N/mm, Min Upper to outsole, N/mm, Min)	-	1080	-
Cl-5.4, Table-1 (ii)(Inter layer bond strength,= N/mm, Min Midsole to outsole, N/mm, Min)	-	1080	-
Cl-5.4, Table-1 (iii)(Whole shoe flexing, flexes)	-	1200	-
Cl-5.4, Table-1 (iv)(Water proofness on complete shoe)	-	1000	-
Cl-5.4, Table-1 (v)(Slip resistance, Cof(1), Min dry and wet* (quarry tile))	-	1500	-
Cl-5.4, Table-1 (vi)(Attachment strength of strap and buckle/D-ring N)	-	800	-
Cl-5.4, Table-1 (vii)(Attachment strength of strap and velcro , N, Min)	-	800	-
Cl-5.4, Table-1 (viii)(Strength of eyelet attachment, N, Min)	-	800	-
Cl-5.4, Table-1 (ix)(Heel pull off strength, N, Min)	-	800	-
Cl-5.4, Table-1 (x)(Top piece attachment strength, N, Min)	-	800	-
Cl-5.4, Table-1 (xi)(Seam strength, N/mm, Min)	-	500	-
Cl-5.4, Table-1 (xii)(Whole shoe topline strength, N, Min)	-	800	-
Cl-5.4, Table-1 (xiii)(Abrasion resistance (volume loss), mm3)	-	900	-
Cl-5.4, Table-1 (xiv)(Chemical requirements(3))	-	40000	-
Cl-5.4, Table-1 (xv)(Lead content (as Pb) ppm, Max)	-	900	-
Cl-5.4, Table-1 (xvi)(Hydrolysis resistance,(4) cut growth at 150 000 flexes, mm, Max)	-	2000	-
Cl-6.1.1, Table-2 (i)(Tear trength, N)	-	450	-
Cl-6.1.1, Table-2 (ii)(Flexing resistance, flexes)	-	1000	-
Cl-6.1.1, Table-2 (iii)(Colour fastness to rubbing (marring/staining))	-	450	-
Cl-6.1.1, Table-2 (iv)(Colour fastness to water (contact method- multi fabrics))	-	450	-
Cl-6.1.1, Table-2 (v)(Water vapour permeability,mg/cm2 /h, Min Water vapour coefficient,mg/cm2 , Min)	-	630	-
Cl-6.1.1, Table-2 (vi)(Stitch tear strength, N/mm, Min)	-	450	-
Cl-6.1.1, Table-2 (vii)(Abrasion resistance)	-	1500	-
Cl-6.1.2, Table-3 (i)(Colour fastness to light, Marring, Min)	-	1500	-
Cl-6.1.2, Table-3 (ii)(Water resistance)	-	630	-
Cl-6.1.2, Table-3 (iii)(Flexing resistance, flexes at (-) 5 °C 25 000 flexes)	-	2000	-
Cl-6.1.3, Table- 4 (i)(Breaking strength, N/mm, Min Elongation at break, percent, Min)	-	450	-
Cl-6.1.3, Table- 4 (ii)(Tear Strength, N, Min)	-	450	-
Cl-6.1.3, Table- 4 (iii)(Strength at needle perforation, N/mm, Min)	-	450	-
Cl-6.1.3, Table- 4 (iv)(Flexing resistance, Flexes)	-	2000	-
Cl-6.1.3, Table- 4 (v)(Water vapour permeability (WVP), mg/cm2 /h, Min)	-	630	-
Cl-6.1.3, Table- 4 (vi)(Hydrolysis resistance)	-	2000	-
Cl-6.1.3, Table- 4 (vii)(Abrasion resistance)	-	1500	-
Cl-6.1.4, Table-5 (i)(Colour fastness to light, Marring, Min)	-	1500	-
Cl-6.1.4, Table- 5 (ii)(Flexing resistance, flexes at (-) 5 ºC, s 25 000 flexes)	-	2000	-
Cl-6.2, Table-6 (i)(Tear strength, N, Min)	-	450	-
Cl-6.2, Table-6 (ii)(Abrasion resistance)	-	1500	-
Cl-6.2, Table-6 (iii)(Colour fastness rubbing (crocking))	-	450	-
Cl-6.2, Table-6 (iv)(Colour fastness to perspiration)	-	700	-
Cl-6.2, Table-6 (v)(Water vapour permeability, mg/cm2 /h, Min Water vapour coefficient, mg/cm2, Min)	-	630	-
Cl-6.3, Table-7 (i)(Flexing index, Min)	-	800	-
Cl-6.3, Table-7 (ii)(Abrasion resistance at 400 cycles)	-	800	-
Cl-6.3, Table-7 (iii)(Water absorption, mg/cm2 , Min Water desorption, percent, Min)	-	700	-
Cl-6.4, Table-8 (i)(Thickness, mm, Min)	-	200	-
Cl-6.4, Table-8 (ii)(Abrasion resistance)	-	1500	-
Cl-6.4, Table-8 (iii)(Water absorption, mg/cm2 , Min Water desorption, percent, Min)	-	700	-
Cl-6.5.1, , Table-9 (i)(Flexing resistance)	-	800	-
Cl-6.5.1, , Table-9 (ii)(Hydrolysis resistance, cut growth at 150 000 flexes, mm, Max)	-	2000	-
Cl-6.5.1, , Table-9 (iii)(Compression set, percent, Max)	-	1000	-
Cl-6.5.2.1, Table-10 (i)(Grain crack index, Min)	-	700	-
Cl-6.5.2.1, Table-10 (ii)(Density, g/cm3 , Min)	-	300	-
Cl-6.5.2.2, Table-11 (i)(Water resistance, (dynamic method))	-	700	-
Cl-6.5.2.3, Table-12 (i)(Hardness, Min)	-	300	-
Cl-6.5.2.3, Table-12 (ii)(Density, g/cm3 , Max)	-	300	-
Cl-6.5.2.3, Table-12 (iii)(Abrasion resistance (volume loss), mm3 , Max)	-	1080	-
Cl-6.5.2.3, Table-12 (iv)(Bond Strength between Rubber top-lift and adjacent material, N/mm, Min)	-	1000	-
Cl-6.6, Table-13 (i)(Heat shrinkage, percent, Max)	-	800	-
Cl-6.6, Table-13 (ii)(Split tear strength, kg/25 mm, Min)	-	600	-
Cl-6.6, Table-13 (iii)(Compression set, percent, Max)	-	800	-
Cl-6.7, Table-14 (i)(Hardness, N)	-	300	-
Cl-6.7, Table-14 (ii)(Resilience, percent)	-	950	-
Cl-6.7, Table-14 (iii)(Moisture resistance, percent)	-	950	-
Cl-6.10, Table-17 (i)(Lace breaking strength, N, Min)	-	600	-
Cl-6.10, Table-17 (ii)(Lace tag strength, N, Min)	-	600	-
Cl-6.10, Table-17 (iii)(Lace to lace abrasion resistance, cycles)	-	800	-
Cl-6.10, Table-17 (iv)(Colour fastness to water for lace contact methodstaining Gray scale rate , Min)	-	450	-
Cl-6.10, Table-17 (v)(Corrosion resistance)	-	900	-
Cl-6.11, Table-18 (ii)(Security of puller attachment strength, N, Min)	-	500	-
Cl-6.11, Table-18 (iii)(Lateral load, N, Min)	-	500	-
Cl-6.11, Table-18 (iv)(End attachment strength, N, Min)	-	500	-
Cl-8.1(Marking)	-	200	-
Cl-6.7, Table-14 (iv)(Area shape retention, percent (a) Initial, Min b) After 10 collapsing load, Min)	-	1200	-
Cl-6.7, Table-14 (v)(Adhesion strength, N/mm)	-	1080	-
Cl-6.8, Table-15 (i)(Peel strength, N/mm a) Initial, Min b) After 5 000 wear cycles, Min)	-	1080	-
Cl- 6.8, Table-15 (ii)(a) Shear strength, kPa b) Initial, Min)	-	800	-
Cl- 6.9, Table-16 (i)(Limit of useful extension, percent, Min)	-	800	-
Cl- 6.9, Table-16 (ii)(Needle strength, N/mm, Min)	-	600	-
Cl-6.11, Table-18 (i)(Fatigue resistance, cycles, Min)	-	800	-

-
Included w.e.f 27.11.2024 Exclusion Cl-6.5.2.1, S.No (1), iii (Abrasion resistance, mm/kcs, Max)

9236

Central Power Research Institute (CPRI), Bangalore

6101024

IS 17505 : Part 1 (2021)

Specification for Thermosetting Insulated Fire Survival Cables for Fixed Installation having Low Emission of Smoke and Corrosive Gases when Affected by Fire for Working Voltages upto and including 1100 Vac and 1500 Vdc

281660 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 7.3, Table 1 to 5 of IS 8130:2013 & IS:10810 (Part 5)-1984(Conductor Resistance Test)	-	2680	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Cl. 7.1.2 of IS 8130 : 2013 & IS:10810 (Part 1)-1984(Annealing Test (for copper))	-	6150	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Cl. 7.1.1 of IS 8130:2013 & IS:10810 (Part 4)-1984(Persulphate Test for tinned copper)	-	3310	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
IS 191:2007 & IS 440(Copper purity test)	-	0	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Cl. 11,14,16, Table 4 and Table 6 of IS 17505 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	42170	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 36)-1984(Diameter of armour Wire)	-	6150	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 37)-1984(Tensile strength and elongation at break)	-	6150	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 38)-1984(Torsion Test on galvanised steel wire for armouring)	-	6150	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 39)-1984(Winding Test for Formed Wires)	-	560	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 40)-1984(Uniformity of Zinc coating on Round Steel Wires and Formed Steel Wires (Strips))	-	3310	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 41)-1984(Mass of Zinc coating on Round Steel Wires and Formed Steel Wires (Strips))	-	780	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 42)-1984(Resistivity test)	-	2680	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Table 1 and Table 2 of IS 17505 -1: 2021, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	3600	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Cl 18.2 of IS 17505-1:2021 & IS:10810 (Part 45)-1984(High voltage test)	-	1770	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Table 1 of IS 17505-1 :2021 & IS:10810 (Part 43)-1984(Insulation Resistance)	-	3940	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Cl. 18.6 of IS 17505-1:2021 & IS:10810 (Part 58)-1998(Oxygen index)	-	9850	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Cl. 18.7 of IS 17505-1:2021 & IS:10810 (Part 64)-2003(Temperature Index)	-	11390	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Table-1 & Table-2 of IS 17505-1:2021 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	6150	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Specification for thermosetting insulated fire survival cables for fixed installation having low emission of smoke and corrosive gases when affected by fire for working voltages upto and including 1100 V A.C. and 1500 V D.C(Hot deformation)	-	29990	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	22050	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	22050	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	22050	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	22050	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Table 1 of IS 17505-1: 2021 & IS:10810 (Part 21)-1984(Cold impact test)	-	1390	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 30)-1984(Hot set test)	-	2550	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 13)-1984(Ozone Resistance test)	-	25000	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Cl 18.5.1 of IS 17505-1 :2021 & IS:10810 (Part 61)-1988(Flame test on single cable)	-	1960	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Table 1 of IS 17505-1:2021 & IS:10810 (Part 12)-1984(Shrinkage test)	-	1170	TThe test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	22050	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	22050	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	22050	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	22050	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Tabel 1 and 2 of IS 17505-1:2021 & IS:10810 (Part 7)-1984(Tensile strength and elongation at break.)	-	3600	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Tabel 1 and 2 of IS 17505-1:2021 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	6150	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Cl 18.6 of IS 17505-1: 2021 & IS:10810 (Part 58)-1998(Oxygen Index.)	-	9850	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Cl 18.8 of IS 17505-1:2021 & IS:10810 (Part 64)-2003(Temperature Index)	-	11390	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 13)-1984(Ozone resistance test)	-	25000	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Table 2 of IS 17505-1:2021 & IS:10810 (Part 15)-1984(Hot deformation)	-	2550	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	22050	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	22050	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	22050	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	22050	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Table 1 of IS 17505-1:2021 & IS:10810 (Part 12)-1984(Shrinkage test)	-	1170	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Cl 18.2of IS 17505-1:2021 & IS:10810 (Part 45)-1984.(High Voltage test.)	-	1770	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Cl 18.5of IS 17505-1:2021 & IS:10810 (Part 53)-1984(Flammability Test)	-	1960	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Table-2 of IS 17505-1:2021 & IS:10810 (Part 20)-1984(Cold bend test)	-	6600	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Table-2 of IS 17505-1:2021 & IS:10810 (Part 21)-1984(Cold impact test)	-	1390	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Cl 18.5 of IS 17505-1:2021 & IS:10810 (Part 61)-1988(Flammability Test)	-	1960	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Cl 18.9 of IS 17505-1:2021(Water immersion test ( effect of water on sheath of cable))	-	0	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Cl 18.8 of IS 17505-1:2021& IS:10810 (Part 63)-1993(Smoke density test)	-	12490	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Cl. 3.5, 18.4 & Annex-E of IS 17505-1:2021(Circuit integrity test under fire)	-	29990	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Cl. 17.1 Table 9 (iv) e(Heat Shock)	-	1170	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Cl. 17.1 Table 9 (iv) h(Water absorption (Gravimetric))	-	18610	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Cl. 17.1 Table 9 (vii) b(Flame test on bunched cable)	-	42170	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Cl. 17.1 Table 9 (ix)(Abrasion resistance test)	-	6150	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Cl. 7.3, Table 1 to 5 of IS 8130:2013 & IS:10810 (Part 5)-1984(Conductor Resistance Test)	-	2680	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Cl. 7.1.2 of IS 8130 : 2013 & IS:10810 (Part 1)-1984(Annealing Test (for copper))	-	6150	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Cl. 7.1.1 of IS 8130:2013 & IS:10810 (Part 4)-1984(Persulphate Test for tinned copper)	-	3310	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
IS 191:2007 & IS 440(Copper purity test)	-	0	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Cl. 11,14,16, Table 4 and Table 6 of IS 17505 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	1850	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 36)-1984(Diameter of armour Wire)	-	1000	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 37)-1984(Tensile strength and elongation at break)	-	12300	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 38)-1984(Torsion Test on galvanised steel wire for armouring)	-	6150	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 39)-1984(Winding Test for Formed Wires)	-	560	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 40)-1984(Uniformity of Zinc coating on Round Steel Wires and Formed Steel Wires (Strips))	-	3310	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 41)-1984(Mass of Zinc coating on Round Steel Wires and Formed Steel Wires (Strips))	-	780	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 42)-1984(Resistivity test)	-	2680	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Table 1 and Table 2 of IS 17505 -1: 2021, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	3600	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Cl 18.2 of IS 17505-1:2021 & IS:10810 (Part 45)-1984(High voltage test)	-	1770	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Table 1 of IS 17505-1 :2021 & IS:10810 (Part 43)-1984(Insulation Resistance)	-	3110	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Cl. 18.6 of IS 17505-1:2021 & IS:10810 (Part 58)-1998(Oxygen index)	-	9850	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Cl. 18.7 of IS 17505-1:2021 & IS:10810 (Part 64)-2003(Temperature Index)	-	11390	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Table-1 & Table-2 of IS 17505-1:2021 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	6150	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Specification for thermosetting insulated fire survival cables for fixed installation having low emission of smoke and corrosive gases when affected by fire for working voltages upto and including 1100 V A.C. and 1500 V D.C(Hot deformation)	-	29990	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	22050	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	22050	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	22050	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	22050	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Table 1 of IS 17505-1: 2021 & IS:10810 (Part 21)-1984(Cold impact test)	-	1390	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 30)-1984(Hot set test)	-	2550	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 13)-1984(Ozone Resistance test)	-	25000	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Cl 18.5.1 of IS 17505-1 :2021 & IS:10810 (Part 61)-1988(Flame test on single cable)	-	1960	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Table 1 of IS 17505-1:2021 & IS:10810 (Part 12)-1984(Shrinkage test)	-	1170	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	22050	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	22050	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	22050	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	22050	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Tabel 1 and 2 of IS 17505-1:2021 & IS:10810 (Part 7)-1984(Tensile strength and elongation at break.)	-	3600	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Tabel 1 and 2 of IS 17505-1:2021 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	6150	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Cl 18.6 of IS 17505-1: 2021 & IS:10810 (Part 58)-1998(Oxygen Index.)	-	11340	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Cl 18.8 of IS 17505-1:2021 & IS:10810 (Part 64)-2003(Temperature Index)	-	11390	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 13)-1984(Ozone resistance test)	-	25000	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Table 2 of IS 17505-1:2021 & IS:10810 (Part 15)-1984(Hot deformation)	-	2550	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	22050	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	22050	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	22050	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	22050	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Table 1 of IS 17505-1:2021 & IS:10810 (Part 12)-1984(Shrinkage test)	-	1170	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Cl 18.2of IS 17505-1:2021 & IS:10810 (Part 45)-1984.(High Voltage test.)	-	1770	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Cl 18.5of IS 17505-1:2021 & IS:10810 (Part 53)-1984(Flammability Test)	-	1960	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Table-2 of IS 17505-1:2021 & IS:10810 (Part 20)-1984(Cold bend test)	-	6600	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Table-2 of IS 17505-1:2021 & IS:10810 (Part 21)-1984(Cold impact test)	-	1390	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Cl 18.5 of IS 17505-1:2021 & IS:10810 (Part 61)-1988(Flammability Test)	-	1960	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Cl 18.9 of IS 17505-1:2021(Water immersion test ( effect of water on sheath of cable))	-	0	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Cl 18.8 of IS 17505-1:2021& IS:10810 (Part 63)-1993(Smoke density test)	-	12490	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Cl. 3.5, 18.4 & Annex-E of IS 17505-1:2021(Circuit integrity test under fire)	-	29990	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Cl. 17.1 Table 9 (iv) e(Heat Shock)	-	1170	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Cl. 17.1 Table 9 (iv) h(Water absorption (Gravimetric))	-	18610	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Cl. 17.1 Table 9 (vii) b(Flame test on bunched cable)	-	42170	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.
Cl. 17.1 Table 9 (ix)(Abrasion resistance test)	-	6150	The test charges indicated is applicable for single core 1.1 kV Cable .if the number of cores are more proportionally the charges will increase. The complete test charges applicable, will be intimated through proforma invoice.

31 Dec, 2026

-
Included w.e.f 08.11.2024

9237

WELL TECH TEST AND RESEARCH CENTER, DERABASSI

9177306

IS 2754 (1964)

Genral requirements for optical instruments

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2(Construction)	-	1000	-
3.3(Workmanship)	-	1000	-
3.4.1(Functional requirements)	-	1000	-
3.4.2(Functional requirements)	-	1000	-
4.2.1(Microscopes)	-	1000	-
4.2.2(Microscopes)	-	1000	-
4.2.3(Microscopes)	-	1000	-
4.2.5(Microscopes)	-	1000	-
4.2.6(Microscopes)	-	1000	-
4.2.7(Microscopes)	-	1000	-
4.2.8(Microscopes)	-	1000	-
4.2.9(Microscopes)	-	1000	-
4.2.10(Microscopes)	-	1000	-
4.2.11(Microscopes)	-	2000	-
4.2.12(Microscopes)	-	2000	-
4.2.13(Microscopes)	-	2000	-
4.2.14(Microscopes)	-	2000	-
4.2.4(Microscopes)	-	2000	-

30 Mar, 2027

-
Included w.e.f 03.06.2024 Scope restricted to tests applicable to microscope.

9238

RAMCO RESEARCH AND DEVOLPMENT CENTRE, CHENNAI

6183606

IS 269 (2015)

Ordinary portland cement - Specification (Sixth Revision)

43/53/33

36100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	3000	-
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	3000	-
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	3000	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	3000	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	3000	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	3000	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	3000	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	3000	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	3000	-
7 Table-3 iii b(Setting Time Final)	-	2000	-
7 Table-3 iii a(Setting Time Initial)	-	2000	-
7 Table-3 ii b(Expansion after aeration)	-	2000	-
7 Table-3 ii b(Expansion by Autoclave)	-	2000	-
7 Table-3 ii a(Expansion after aeration)	-	2000	-
7 Table-3 ii a(Expansion by Le Chatelier)	-	2000	-
7 Table-3 i.(Fineness)	-	2000	-
6.1 Table-2 viii(Alkali content)	-	2000	-
6.1 Table-2 vii(Chloride content)	-	1500	-
6.1 Table-2 vi(Loss on ignition)	-	1000	-
6.1 Table-2 v(Total Sulphur Content calculated as Sulphuric Anhydride)	-	1800	-
6.1 Table-2 iv(Magnesia)	-	1000	-
6.1 Table-2 iii.(Insoluble residue)	-	1800	-
6.1 Table-2 ii.(Ratio of percentage of alumina to that of iron oxide)	-	2000	-
6.1 Table-2 i.(Ratio of percentage of lime to percentage of silica, alumina and iron oxide)	-	2000	-
6 - Table - 1 viii(Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	2000	-
6 - Table - 1 vii(Chloride content - Cl 4.13 of IS 4032:1985)	-	1500	-
6 - Table - 1 vi(Loss on ignition - Cl 4.2 of IS 4032:1985)	-	1000	-
6 - Table - 1 v(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-	1800	-
6 - Table - 1 iv(Magnesia - Cl 4.8 of IS 4032:1985)	-	1000	-
6 - Table - 1 iii(Insoluble residue - Cl 4.10 of IS 4032:1985)	-	1800	-
6 - Table - 1 ii(Ratio of percentage of alumina to that of iron oxide - Cl 4 of IS 4032:1985)	-	2000	-
6 - Table - 1 i(Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-	2000	-
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	3000	-
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	3000	-
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	3000	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	3000	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	3000	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	3000	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	3000	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	3000	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	3000	-
7 Table-3 iii b(Setting Time Final)	-	2000	-
7 Table-3 iii a(Setting Time Initial)	-	2000	-
7 Table-3 ii b(Expansion after aeration)	-	2000	-
7 Table-3 ii b(Expansion by Autoclave)	-	2000	-
7 Table-3 ii a(Expansion after aeration)	-	2000	-
7 Table-3 ii a(Expansion by Le Chatelier)	-	2000	-
7 Table-3 i.(Fineness)	-	2000	-
6.1 Table-2 viii(Alkali content)	-	2000	-
6.1 Table-2 vii(Chloride content)	-	1500	-
6.1 Table-2 vi(Loss on ignition)	-	1000	-
6.1 Table-2 v(Total Sulphur Content calculated as Sulphuric Anhydride)	-	1800	-
6.1 Table-2 iv(Magnesia)	-	1000	-
6.1 Table-2 iii.(Insoluble residue)	-	1800	-
6.1 Table-2 ii.(Ratio of percentage of alumina to that of iron oxide)	-	2000	-
6.1 Table-2 i.(Ratio of percentage of lime to percentage of silica, alumina and iron oxide)	-	2000	-
6 - Table - 1 viii( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	2000	-
6 - Table - 1 vii(Chloride content - Cl 4.13 of IS 4032:1985)	-	1500	-
6 - Table - 1 vi(Loss on ignition - Cl 4.2 of IS 4032:1985)	-	1000	-
6 - Table - 1 v(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-	1800	-
6 - Table - 1 iv(Magnesia - Cl 4.8 of IS 4032:1985)	-	1000	-
6 - Table - 1 iii(Insoluble residue - Cl 4.10 of IS 4032:1985)	-	1500	-
6 - Table - 1 ii(Ratio of percentage of alumina to that of iron oxide - Cl 4 of IS 4032:1985)	-	2000	-
6 - Table - 1 i(Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-	2000	-
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	3000	-
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	3000	-
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	3000	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	3000	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	3000	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	3000	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	3000	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	3000	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	3000	-
7 Table-3 iii b(Setting Time Final)	-	2000	-
7 Table-3 iii a(Setting Time Initial)	-	2000	-
7 Table-3 ii b(Expansion after aeration)	-	2000	-
7 Table-3 ii b(Expansion by Autoclave)	-	2000	-
7 Table-3 ii a(Expansion after aeration)	-	2000	-
7 Table-3 ii a(Expansion by Le Chatelier)	-	2000	-
7 Table-3 i.(Fineness)	-	2000	-
6.1 Table-2 viii(Alkali content)	-	2000	-
6.1 Table-2 vii(Chloride content)	-	1500	-
6.1 Table-2 vi(Loss on ignition)	-	1000	-
6.1 Table-2 v(Total Sulphur Content calculated as Sulphuric Anhydride)	-	1800	-
6.1 Table-2 iv(Magnesia)	-	1000	-
6.1 Table-2 iii.(Insoluble residue)	-	1800	-
6.1 Table-2 ii.(Ratio of percentage of alumina to that of iron oxide)	-	2000	-
6.1 Table-2 i.(Ratio of percentage of lime to percentage of silica, alumina and iron oxide)	-	2000	-
6.1 Table-2 i.(Ratio of percentage of lime to percentage of silica, alumina and iron oxide)	-	2000	-
6.1 Table-2 ii.(Ratio of percentage of alumina to that of iron oxide)	-	2000	-
6.1 Table-2 iii.(Insoluble residue)	-	1800	-
6.1 Table-2 iv(Magnesia)	-	1000	-
6.1 Table-2 v(Total Sulphur Content calculated as Sulphuric Anhydride)	-	1800	-
6.1 Table-2 vi(Loss on ignition)	-	1000	-
6.1 Table-2 vii(Chloride content)	-	1500	-
7 Table-3 i.(Fineness)	-	2000	-
7 Table-3 ii a(Expansion by Le Chatelier)	-	2000	-
7 Table-3 ii a(Expansion after aeration)	-	2000	-
7 Table-3 ii b(Expansion by Autoclave)	-	2000	-
7 Table-3 ii b(Expansion after aeration)	-	2000	-
7 Table-3 iii a(Setting Time Initial)	-	2000	-
7 Table-3 iii b(Setting Time Final)	-	2000	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	3000	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	3000	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	3000	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	3000	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	3000	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	3000	-
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	3000	-
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	3000	-
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	3000	-

12 Jan, 2028

-
Exclusion: Clause 7 Table 3, SI No. (v) (Transverse Strength)

9239

CIPET: CENTRE FOR SKILLING AND TECHNICAL SUPPORT (CSTS) - (CIPET), AURANGABAD

7123534

IS 16709 (2017)

Textiles - Polypropylene (PP) woven, laminated, block bottom valve sacks for packaging of 50 kg cement - Specification

15150 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.1(Sack Length)	-	500	-
4.1.2(Sack Width)	-	500	-
4.1.3(Top Closure Width and Bottom Closure Width)	-	500	-
4.1.4(Patch Length)	-	500	-
4.1.5(Patch Height)	-	500	-
4.1.6(Length of Valve)	-	500	-
4.1.7(Width of Valve Sleeve)	-	500	-
4.1.8(Length of Valve Sleeve)	-	500	-
5.1(Raw Material)	-	2000	-
5.2(Fabric)	-	500	-
5.2(Tape density and width)	-	500	-
5.4(Lamination for PP)	-	2000	-
5.4(Lamination for LDPE)	-	500	-
6.1(Mass of Bale)	-	500	-
6.2.1(Breaking Strength and Elongation at Break of Fabric)	-	1350	1100+250
6.2.2(Weld Strength of Top and Bottom Closures)	-	1100	-
6.3(Drop Impact Testing of Filled Sacks)	-	1000	-
6.4(Ash Content)	-	1200	-
8(Atomspheric Conditions for Conditioning and Testing)	-	500	-
4.1.1(Sack Length)	-	0	-
4.1.2(Sack Width)	-	0	-
4.1.3(Top Closure Width and Bottom Closure Width)	-	0	-
4.1.4(Patch Length)	-	0	-
4.1.5(Patch Height)	-	0	-
4.1.6(Length of Valve)	-	0	-
4.1.7(Width of Valve Sleeve)	-	0	-
4.1.8(Length of Valve Sleeve)	-	0	-
5.1(Raw Material)	-	0	-
5.2(Fabric)	-	0	-
5.2(Tape density and width)	-	0	-
5.4(Lamination for PP)	-	0	-
5.4(Lamination for LDPE)	-	0	-
6.1(Mass of Bale)	-	0	-
6.2.1(Breaking Strength and Elongation at Break of Fabric)	-	0	-
6.2.2(Weld Strength of Top and Bottom Closures)	-	0	-
6.3(Drop Impact Testing of Filled Sacks)	-	0	-
6.4(Ash Content)	-	0	-
8(Atomspheric Conditions for Conditioning and Testing)	-	0	-
Cl-5.6(Capacity)	-	0	-
Cl- 6.6, Table.-1 (ii)(Ends per dm)	-	0	-
Cl-6.6, Table-1 (iii)(Picks per dm)	-	0	-
Cl.6.6, Table-1 (vii)(Elongation at break of fabric)	-	0	-
4.1.1(Sack Length)	-	500	-
4.1.2(Sack Width)	-	500	-
4.1.3(Top Closure Width and Bottom Closure Width)	-	500	-
4.1.4(Patch Length)	-	500	-
4.1.5(Patch Height)	-	500	-
4.1.6(Length of Valve)	-	500	-
4.1.7(Width of Valve Sleeve)	-	500	-
4.1.8(Length of Valve Sleeve)	-	500	-
5.1(Raw Material)	-	1050	-
5.2(Fabric)	-	500	-
5.2(Tape density and width)	-	500	-
5.4(Lamination for PP)	-	500	-
5.4(Lamination for LDPE)	-	500	-
6.1(Mass of Bale)	-	500	-
6.2.1(Breaking Strength and Elongation at Break of Fabric)	-	1350	-
6.2.2(Weld Strength of Top and Bottom Closures)	-	1350	-
6.3(Drop Impact Testing of Filled Sacks)	-	1100	-
6.4(Ash Content)	-	950	-
8(Atomspheric Conditions for Conditioning and Testing)	-	500	-
Cl-5.6(Capacity)	-	500	-
Cl- 6.6, Table.-1 (ii)(Ends per dm)	-	500	-
Cl-6.6, Table-1 (iii)(Picks per dm)	-	500	-
Cl.6.6, Table-1 (vii)(Elongation at break of fabric)	-	0	-

31 Dec, 2026

-
Included w.e.f. 20.08.2024 Exclusion: Cl.6.5 (Air Permeability)

9240

Atmy Analytical Labs Pvt. Ltd., Faridabad

8167506

IS 14543 (2024)

Packaged Drinking Water Other than Packaged Natural Mineral Water Specification Third Revision

17500 View breakup
-

Clause No.	Exclusion	Remark
5.2.1(Escherichia Coli)	-	-
5.2.2(Coliform)	-	-
5.2.3(Faecal Streptococci & Staphylococcus aureus)	-	-
5.2.4(Sulphite Reducing Anaerobes)	-	-
5.2.5(Pseudomonas aeruginosa)	-	-
5.2.6(Aerobic Microbial Count @ 22 o C & 37o C)	-	-
5.2.7(Yeast & Mould)	-	-
5.2.8(Salmonella & Shigella)	-	-
5.2.9(Vibrio Cholera & Vibrio parahaemolyicus)	-	-
5.3(Appearance)	-	-
5.3/Table 1/i(Colour)	-	-
5.3/Table 1/ii(Odour)	-	-
5.3/Table 1/iii(Taste)	-	-
5.3/Table 1/iv(Turbidity)	-	-
5.3/Table 1/v(Total Dissolved Solids)	-	-
5.3/Table 1/vi(pH)	-	-
5.3/Table 2/i(Barium)	-	-
5.3/Table 2/ii(Copper)	-	-
5.3/Table 2/iii(Iron)	-	-
5.3/Table 2/iv(Maganese)	-	-
5.3/Table 2/v(Nitrate)	-	-
5.3/Table 2/vi(Nitrite)	-	-
5.3/Table 2/vii(Fluoride)	-	-
5.3/Table 2/viii(Zinc)	-	-
5.3/Table 2/ix(Silver)	-	-
5.3/Table 2/x(Aluminium)	-	-
5.3/Table 2/xi(Chloride)	-	-
5.3/Table 2/xii(Selenium)	-	-
5.3/Table 2/xiii(Suphate)	-	-
5.3/Table 2/xiv(Alkalinity)	-	-
5.3/Table 2/xv(Calcium)	-	-
5.3/Table 2/xvi(Magnesium)	-	-
5.3/Table 2/xvii(Sodium)	-	-
5.3/Table 2/xviii(Residual Free Chlorine)	-	-
5.3/Table 2/xix(Phenolic Compounds)	-	-
5.3/Table 2/xx(Mineral Oil)	-	-
5.3/Table 2/xxi(Anionic Surface- Active Agents as MBAS)	-	-
5.3/Table 2/xxii(Sulphide)	-	-
5.3/Table 2/xxiii(Antinomy)	-	-
5.3/Table 2/xxiv(Borates)	-	-
5.3/Table 2/xxxv(Bromate)	-	-
5.3/Table 3/i(Mercury)	-	-
5.3/Table 3/ii(Cadmium)	-	-
5.3/Table 3/iii(Arsenic)	-	-
5.3/Table 3/iv(Cyanide)	-	-
5.3/Table 3/v(Lead)	-	-
5.3/Table 3/vi(Chromium)	-	-
5.3/Table 3/vii(Nickel)	-	-
5.3/Table 3/viii(Polyclorinated biphenyl (PCB))	-	-
5.3/Table 3/ix(Polynuclear Aromatic Hydrocarbons)	-	-
5.3/Table 3/x(Uranium)	-	-
5.2.1(Escherichia Coli)	-	-
5.2.2(Coliform)	-	-
5.2.3(Faecal Streptococci & Staphylococcus aureus)	-	-
5.2.4(Sulphite Reducing Anaerobes)	-	-
5.2.5(Pseudomonas aeruginosa)	-	-
5.2.6(Aerobic Microbial Count @ 22 o C & 37o C)	-	-
5.2.7(Yeast & Mould)	-	-
5.2.8(Salmonella & Shigella)	-	-
5.2.9(Vibrio Cholera & Vibrio parahaemolyicus)	-	-
5.3(Appearance)	-	-
5.3/Table 1/i(Colour)	-	-
5.3/Table 1/ii(Odour)	-	-
5.3/Table 1/iii(Taste)	-	-
5.3/Table 1/iv(Turbidity)	-	-
5.3/Table 1/v(Total Dissolved Solids)	-	-
5.3/Table 1/vi(pH)	-	-
5.3/Table 2/i(Barium)	-	-
5.3/Table 2/ii(Copper)	-	-
5.3/Table 2/iii(Iron)	-	-
5.3/Table 2/iv(Maganese)	-	-
5.3/Table 2/v(Nitrate)	-	-
5.3/Table 2/vi(Nitrite)	-	-
5.3/Table 2/vii(Fluoride)	-	-
5.3/Table 2/viii(Zinc)	-	-
5.3/Table 2/ix(Silver)	-	-
5.3/Table 2/x(Aluminium)	-	-
5.3/Table 2/xi(Chloride)	-	-
5.3/Table 2/xii(Selenium)	-	-
5.3/Table 2/xiii(Suphate)	-	-
5.3/Table 2/xiv(Alkalinity)	-	-
5.3/Table 2/xv(Calcium)	-	-
5.3/Table 2/xvi(Magnesium)	-	-
5.3/Table 2/xvii(Sodium)	-	-
5.3/Table 2/xviii(Residual Free Chlorine)	-	-
5.3/Table 2/xix(Phenolic Compounds)	-	-
5.3/Table 2/xx(Mineral Oil)	-	-
5.3/Table 2/xxi(Anionic Surface- Active Agents as MBAS)	-	-
5.3/Table 2/xxii(Sulphide)	-	-
5.3/Table 2/xxiii(Antinomy)	-	-
5.3/Table 2/xxiv(Borates)	-	-
5.3/Table 2/xxxv(Bromate)	-	-
5.3/Table 3/i(Mercury)	-	-
5.3/Table 3/ii(Cadmium)	-	-
5.3/Table 3/iii(Arsenic)	-	-
5.3/Table 3/iv(Cyanide)	-	-
5.3/Table 3/v(Lead)	-	-
5.3/Table 3/vi(Chromium)	-	-
5.3/Table 3/vii(Nickel)	-	-
5.3/Table 3/viii(Polyclorinated biphenyl (PCB))	-	-
5.3/Table 3/ix(Polynuclear Aromatic Hydrocarbons)	-	-
5.3/Table 3/x(Uranium)	-	-
5.2.1(Escherichia Coli)	-	-
5.2.2(Coliform)	-	-
5.2.3(Faecal Streptococci & Staphylococcus aureus)	-	-
5.2.4(Sulphite Reducing Anaerobes)	-	-
5.2.5(Pseudomonas aeruginosa)	-	-
5.2.6(Aerobic Microbial Count @ 22 o C & 37o C)	-	-
5.2.7(Yeast & Mould)	-	-
5.2.8(Salmonella & Shigella)	-	-
5.2.9(Vibrio Cholera & Vibrio parahaemolyicus)	-	-
5.3(Appearance)	-	-
5.3/Table 1/i(Colour)	-	-
5.3/Table 1/ii(Odour)	-	-
5.3/Table 1/iii(Taste)	-	-
5.3/Table 1/iv(Turbidity)	-	-
5.3/Table 1/v(Total Dissolved Solids)	-	-
5.3/Table 1/vi(pH)	-	-
5.3/Table 2/i(Barium)	-	-
5.3/Table 2/ii(Copper)	-	-
5.3/Table 2/iii(Iron)	-	-
5.3/Table 2/iv(Maganese)	-	-
5.3/Table 2/v(Nitrate)	-	-
5.3/Table 2/vi(Nitrite)	-	-
5.3/Table 2/vii(Fluoride)	-	-
5.3/Table 2/viii(Zinc)	-	-
5.3/Table 2/ix(Silver)	-	-
5.3/Table 2/x(Aluminium)	-	-
5.3/Table 2/xi(Chloride)	-	-
5.3/Table 2/xii(Selenium)	-	-
5.3/Table 2/xiii(Suphate)	-	-
5.3/Table 2/xiv(Alkalinity)	-	-
5.3/Table 2/xv(Calcium)	-	-
5.3/Table 2/xvi(Magnesium)	-	-
5.3/Table 2/xvii(Sodium)	-	-
5.3/Table 2/xviii(Residual Free Chlorine)	-	-
5.3/Table 2/xix(Phenolic Compounds)	-	-
5.3/Table 2/xx(Mineral Oil)	-	-
5.3/Table 2/xxi(Anionic Surface- Active Agents as MBAS)	-	-
5.3/Table 2/xxii(Sulphide)	-	-
5.3/Table 2/xxiii(Antinomy)	-	-
5.3/Table 2/xxiv(Borates)	-	-
5.3/Table 2/xxxv(Bromate)	-	-
5.3/Table 3/i(Mercury)	-	-
5.3/Table 3/ii(Cadmium)	-	-
5.3/Table 3/iii(Arsenic)	-	-
5.3/Table 3/iv(Cyanide)	-	-
5.3/Table 3/v(Lead)	-	-
5.3/Table 3/vi(Chromium)	-	-
5.3/Table 3/vii(Nickel)	-	-
5.3/Table 3/viii(Polyclorinated biphenyl (PCB))	-	-
5.3/Table 3/ix(Polynuclear Aromatic Hydrocarbons)	-	-
5.3/Table 3/x(Uranium)	-	-
5.4/Annex D/i(P,P-DDT)	-	-
5.4/Annex D/ii(Lindane)	-	-
5.4/Annex D/iv(b-Endosulfan)	-	-
5.4/Annex D/xvi(Dieldrin)	-	-
5.4/Annex D/xvi(Aldrin)	-	-
5.4/Annex D/i(O,P-DDT)	-	-
5.4/Annex D/iv(a-Endosulfan)	-	-
5.4/Annex D/iii(d-HCH)	-	-
5.4/Annex D/i(O,P-DDD)	-	-
5.4/Annex D/i(P,P-DDE)	-	-
5.4/Annex D/i(O,P-DDE)	-	-
5.4/Annex D/iii(a-HCH)	-	-
5.4/Annex D/iii(β- HCH)	-	-
5.4/Annex D/iv(Endosulfan sulfate)	-	-
5.4/Annex D/i(P,P-DDD)	-	-
5.4/Annex D/xii(Alachlor)	-	-
5.4/Annex D/vii(Chlorpyrifos)	-	-
5.4/Annex D/x(Butachlor)	-	-
5.4/Annex D/vi(Ethion)	-	-
5.4/Annex D/xiv(Methyl parathion)	-	-
5.4/Annex D/xv(Malathion)	-	-
5.4/Annex D/viii(Phorate)	-	-
5.4/Annex D/v(Monochrotophos)	-	-
5.4/Annex D/xiii(Atrazine)	-	-
5.4/Annex D/viii(Phorate sulphoxide)	-	-
5.4/Annex D/viii(Phorate sulfone)	-	-
5.4/Annex D/xxvii(Methyl paraoxon)	-	-
5.4/Annex D/xxviii(Malaoxon)	-	-
5.4/Annex D/xi(Isoproturon)	-	-
5.4/Annex D/ix(2,4 –D)	-	-
5.4/Annex D/xxxi(Total Pesticide Residue)	-	-
Cl-5.1(General Requirements)	-	-
Cl-5.2.1(Escherichia coli or thermotolerant bacteria)	-	-
Cl-5.2.2(Coliform)	-	-
Cl-5.2.3(Staphylococcus aureus)	-	-
Cl-5.2.4(Sulphite Reducing Anaerobes)	-	-
Cl-5.2.5(Pseudomonas Aeruginosa)	-	-
Cl-5.2.6(Aerobic Microbial Count @ 37 deg C)	-	-
Cl-5.2.7(Yeast and mould)	-	-
Cl-5.2.8(Salmonella)	-	-
Cl-5.2.9(Vibrio cholera)	-	-
Cl-5.3, Table-1 (i)(Colour, true colour units, Max)	-	-
Cl-5.3, Table-1 (ii)(Odour)	-	-
Cl-5.3, Table-1 (iii)(Taste)	-	-
Cl-5.3, Table-1 (iv)(Turbidity, nephelometric turbidity unit (NTU), Max)	-	-
Cl-5.3, Table-1 (v)(Total dissolved solids, mg/l, Max)	-	-
Cl-5.3, Table-1 (vi)(pH)	-	-
Cl-5.3, Table-2 (i)(Barium (as Ba))	-	-
Cl-5.3, Table-2 (ii)(Copper (as Cu))	-	-
Cl-5.3, Table-2 (iii)(Iron (as Fe))	-	-
Cl-5.3, Table-2 (iv)(Manganese (as Mn))	-	-
Cl-5.3, Table-2 (v)(Nitrate (as NO3 ))	-	-
Cl-5.3, Table-2 (vi)(Nitrite (as NO2 ))	-	-
Cl-5.3, Table-2 (vii)(Fluoride (as F))	-	-
Cl-5.3, Table-2 (viii)(Zinc (as Zn))	-	-
Cl-5.3, Table-2 (ix)(Silver (as Ag))	-	-
Cl-5.3, Table-2 (x)(Aluminium (as A1))	-	-
Cl-5.3, Table-2 (xi)(Chloride (as Cl))	-	-
Cl-5.3, Table-2 (xii)(Selenium (as Se))	-	-
Cl-5.3, Table-2 (xiii)(Sulphate (as SO4 ))	-	-
Cl-5.3, Table-2 (xiv)(Alkalinity (as HCO3 ))	-	-
Cl-5.3, Table-2 (xv)(Calcium (as Ca))	-	-
Cl-5.3, Table-2 (xvi)(Magnesium (as Mg))	-	-
Cl-5.3, Table-2 (xvii)(Sodium (as Na))	-	-
Cl-5.3, Table-2 (xviii)(Residual free chlorine)	-	-
Cl-5.3, Table-2 (xix)(Phenolic compounds (as C6H5OH))	-	-
Cl-5.3, Table-2 (xx)(Mineral oil)	-	-
Cl-5.3, Table-2 (xxi)(Anionic surface active agents)	-	-
Cl-5.3, Table-2 (xxii)(Sulphide)	-	-
Cl-5.3, Table-2 (xxiii)(Antimony (as Sb))	-	-
Cl-5.3, Table-2 (xxiv)(Borates (as B))	-	-
Cl-5.3, Table-2 (xxv)(Bromates (as BrO3 ))	-	-
Cl-5.3, Table-3 (i)(Mercury (as Hg))	-	-
Cl-5.3, Table-3 (ii)(Cadmium (as Cd))	-	-
Cl-5.3, Table-3 (iii)(Arsenic (as As))	-	-
Cl-5.3, Table-3 (iv)(Cyanide (as CN))	-	-
Cl-5.3, Table-3 (v)(Lead (as Pb))	-	-
Cl-5.3, Table-3 (vi)(Chromium (as Cr))	-	-
Cl-5.3, Table-3 (vii)(Nickel (as Ni))	-	-
Cl-5.3, Table-3 (viii)(Polychlorinated biphenyl (PCB))	-	-
Cl-5.3, Table-3 (ix)(Polynuclear aromatic hydrocarbons)	-	-
Cl-5.3, Table-3 (x)(Uranium)	-	-
Cl-5.3, Table-4 (i)(Alpha emitters, Becquerel (Bq/l))	-	-
Cl-5.3, Table-4 (ii)(Beta emitters, Becquerel (Bq/l),)	-	-
Cl-5.4 (i)(Pesticide residues considered individually)	-	-
Cl-5.4 (ii)(Total pesticide residue)	-	-
Cl-5.2.3(Faecal streptococci)	-	-
Cl-5.2.8(shigella)	-	-
Cl-5.2.9(V.parahaemolyticus)	-	-
5.2.1(Escherichia Coli)	-	-
5.2.2(Coliform)	-	-
5.2.3(Faecal Streptococci & Staphylococcus aureus)	-	-
5.2.4(Sulphite Reducing Anaerobes)	-	-
5.2.5(Pseudomonas aeruginosa)	-	-
5.2.6(Aerobic Microbial Count @ 22 o C & 37o C)	-	-
5.2.7(Yeast & Mould)	-	-
5.2.8(Salmonella & Shigella)	-	-
5.2.9(Vibrio Cholera & Vibrio parahaemolyicus)	-	-
5.3(Appearance)	-	-
5.3/Table 1/i(Colour)	-	-
5.3/Table 1/ii(Odour)	-	-
5.3/Table 1/iii(Taste)	-	-
5.3/Table 1/iv(Turbidity)	-	-
5.3/Table 1/v(Total Dissolved Solids)	-	-
5.3/Table 1/vi(pH)	-	-
5.3/Table 2/i(Barium)	-	-
5.3/Table 2/ii(Copper)	-	-
5.3/Table 2/iii(Iron)	-	-
5.3/Table 2/iv(Maganese)	-	-
5.3/Table 2/v(Nitrate)	-	-
5.3/Table 2/vi(Nitrite)	-	-
5.3/Table 2/vii(Fluoride)	-	-
5.3/Table 2/viii(Zinc)	-	-
5.3/Table 2/ix(Silver)	-	-
5.3/Table 2/x(Aluminium)	-	-
5.3/Table 2/xi(Chloride)	-	-
5.3/Table 2/xii(Selenium)	-	-
5.3/Table 2/xiii(Suphate)	-	-
5.3/Table 2/xiv(Alkalinity)	-	-
5.3/Table 2/xv(Calcium)	-	-
5.3/Table 2/xvi(Magnesium)	-	-
5.3/Table 2/xvii(Sodium)	-	-
5.3/Table 2/xviii(Residual Free Chlorine)	-	-
5.3/Table 2/xix(Phenolic Compounds)	-	-
5.3/Table 2/xx(Mineral Oil)	-	-
5.3/Table 2/xxi(Anionic Surface- Active Agents as MBAS)	-	-
5.3/Table 2/xxii(Sulphide)	-	-
5.3/Table 2/xxiii(Antinomy)	-	-
5.3/Table 2/xxiv(Borates)	-	-
5.3/Table 2/xxxv(Bromate)	-	-
5.3/Table 3/i(Mercury)	-	-
5.3/Table 3/ii(Cadmium)	-	-
5.3/Table 3/iii(Arsenic)	-	-
5.3/Table 3/iv(Cyanide)	-	-
5.3/Table 3/v(Lead)	-	-
5.3/Table 3/vi(Chromium)	-	-
5.3/Table 3/vii(Nickel)	-	-
5.3/Table 3/viii(Polyclorinated biphenyl (PCB))	-	-
5.3/Table 3/ix(Polynuclear Aromatic Hydrocarbons)	-	-
5.3/Table 3/x(Uranium)	-	-
5.4/Annex D/i(P,P-DDT)	-	-
5.4/Annex D/ii(Lindane)	-	-
5.4/Annex D/iv(b-Endosulfan)	-	-
5.4/Annex D/xvi(Dieldrin)	-	-
5.4/Annex D/xvi(Aldrin)	-	-
5.4/Annex D/i(O,P-DDT)	-	-
5.4/Annex D/iv(a-Endosulfan)	-	-
5.4/Annex D/iii(d-HCH)	-	-
5.4/Annex D/i(O,P-DDD)	-	-
5.4/Annex D/i(P,P-DDE)	-	-
5.4/Annex D/i(O,P-DDE)	-	-
5.4/Annex D/iii(a-HCH)	-	-
5.4/Annex D/iii(β- HCH)	-	-
5.4/Annex D/iv(Endosulfan sulfate)	-	-
5.4/Annex D/i(P,P-DDD)	-	-
5.4/Annex D/xii(Alachlor)	-	-
5.4/Annex D/vii(Chlorpyrifos)	-	-
5.4/Annex D/x(Butachlor)	-	-
5.4/Annex D/vi(Ethion)	-	-
5.4/Annex D/xiv(Methyl parathion)	-	-
5.4/Annex D/xv(Malathion)	-	-
5.4/Annex D/viii(Phorate)	-	-
5.4/Annex D/v(Monochrotophos)	-	-
5.4/Annex D/xiii(Atrazine)	-	-
5.4/Annex D/viii(Phorate sulphoxide)	-	-
5.4/Annex D/viii(Phorate sulfone)	-	-
5.4/Annex D/xxvii(Methyl paraoxon)	-	-
5.4/Annex D/xxviii(Malaoxon)	-	-
5.4/Annex D/xi(Isoproturon)	-	-
5.4/Annex D/ix(2,4 –D)	-	-
5.4/Annex D/xxxi(Total Pesticide Residue)	-	-
Cl-5.1(General Requirements)	-	-
Cl-5.2.1(Escherichia coli or thermotolerant bacteria)	-	-
Cl-5.2.2(Coliform)	-	-
Cl-5.2.3(Staphylococcus aureus)	-	-
Cl-5.2.4(Sulphite Reducing Anaerobes)	-	-
Cl-5.2.5(Pseudomonas Aeruginosa)	-	-
Cl-5.2.6(Aerobic Microbial Count @ 37 deg C)	-	-
Cl-5.2.7(Yeast and mould)	-	-
Cl-5.2.8(Salmonella)	-	-
Cl-5.2.9(Vibrio cholera)	-	-
Cl-5.3, Table-1 (i)(Colour, true colour units, Max)	-	-
Cl-5.3, Table-1 (ii)(Odour)	-	-
Cl-5.3, Table-1 (iii)(Taste)	-	-
Cl-5.3, Table-1 (iv)(Turbidity, nephelometric turbidity unit (NTU), Max)	-	-
Cl-5.3, Table-1 (v)(Total dissolved solids, mg/l, Max)	-	-
Cl-5.3, Table-1 (vi)(pH)	-	-
Cl-5.3, Table-2 (i)(Barium (as Ba))	-	-
Cl-5.3, Table-2 (ii)(Copper (as Cu))	-	-
Cl-5.3, Table-2 (iii)(Iron (as Fe))	-	-
Cl-5.3, Table-2 (iv)(Manganese (as Mn))	-	-
Cl-5.3, Table-2 (v)(Nitrate (as NO3 ))	-	-
Cl-5.3, Table-2 (vi)(Nitrite (as NO2 ))	-	-
Cl-5.3, Table-2 (vii)(Fluoride (as F))	-	-
Cl-5.3, Table-2 (viii)(Zinc (as Zn))	-	-
Cl-5.3, Table-2 (ix)(Silver (as Ag))	-	-
Cl-5.3, Table-2 (x)(Aluminium (as A1))	-	-
Cl-5.3, Table-2 (xi)(Chloride (as Cl))	-	-
Cl-5.3, Table-2 (xii)(Selenium (as Se))	-	-
Cl-5.3, Table-2 (xiii)(Sulphate (as SO4 ))	-	-
Cl-5.3, Table-2 (xiv)(Alkalinity (as HCO3 ))	-	-
Cl-5.3, Table-2 (xv)(Calcium (as Ca))	-	-
Cl-5.3, Table-2 (xvi)(Magnesium (as Mg))	-	-
Cl-5.3, Table-2 (xvii)(Sodium (as Na))	-	-
Cl-5.3, Table-2 (xviii)(Residual free chlorine)	-	-
Cl-5.3, Table-2 (xix)(Phenolic compounds (as C6H5OH))	-	-
Cl-5.3, Table-2 (xx)(Mineral oil)	-	-
Cl-5.3, Table-2 (xxi)(Anionic surface active agents)	-	-
Cl-5.3, Table-2 (xxii)(Sulphide)	-	-
Cl-5.3, Table-2 (xxiii)(Antimony (as Sb))	-	-
Cl-5.3, Table-2 (xxiv)(Borates (as B))	-	-
Cl-5.3, Table-2 (xxv)(Bromates (as BrO3 ))	-	-
Cl-5.3, Table-3 (i)(Mercury (as Hg))	-	-
Cl-5.3, Table-3 (ii)(Cadmium (as Cd))	-	-
Cl-5.3, Table-3 (iii)(Arsenic (as As))	-	-
Cl-5.3, Table-3 (iv)(Cyanide (as CN))	-	-
Cl-5.3, Table-3 (v)(Lead (as Pb))	-	-
Cl-5.3, Table-3 (vi)(Chromium (as Cr))	-	-
Cl-5.3, Table-3 (vii)(Nickel (as Ni))	-	-
Cl-5.3, Table-3 (viii)(Polychlorinated biphenyl (PCB))	-	-
Cl-5.3, Table-3 (ix)(Polynuclear aromatic hydrocarbons)	-	-
Cl-5.3, Table-3 (x)(Uranium)	-	-
Cl-5.3, Table-4 (i)(Alpha emitters, Becquerel (Bq/l))	-	-
Cl-5.3, Table-4 (ii)(Beta emitters, Becquerel (Bq/l),)	-	-
Cl-5.4 (i)(Pesticide residues considered individually)	-	-
Cl-5.4 (ii)(Total pesticide residue)	-	-
Cl-5.2.3(Faecal streptococci)	-	-
Cl-5.2.8(shigella)	-	-
Cl-5.2.9(V.parahaemolyticus)	-	-

25 Feb, 2027

-
Exclusion: Cl-5.3, Table-4 (i) (Alpha emitters), Cl-5.3, Table-4 (ii) (Beta emitters)

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number