BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

11331 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

9241

KC INDIA TEST LABORATORIES LLP

9140406

IS 9537 : Part 2 (1981)

Specification for conduits for electrical installations: Part 2 rigid steel conduits

3150 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1(Construction, Cl. 8 of IS 9537-1)	-	250	20% Discount to BIS
8.2(Construction, IS 9537-2)	-	250	20% Discount to BIS
6.1(Marking, IS 9537-2)	-	200	20% Discount to BIS
6.2(Marking, IS 9537-2)	-	200	20% Discount to BIS
6.3(Marking, Cl. 6.4 of IS 9537-1)	-	100	20% Discount to BIS
7.2.1(Dimensions, (Minimum outside Diameter), IS 9537-2)	-	500	20% Discount to BIS
7.2.2(Dimensions (Maximum outside Diameter), IS 9537-2)	-	500	20% Discount to BIS
7.3(Dimensions (Wall thickness), IS 9537-2)	-	500	20% Discount to BIS
7.3.3(Uniformity of wall thickness, IS 9537-2)	-	500	20% Discount to BIS
7.4(Screw threads, IS 9537-2)	-	500	20% Discount to BIS
9.2(Mechanical Properties (Bending test), Cl. 9.3 of IS 9537-1)	-	1500	20% Discount to BIS
9.3(Mechanical Properties (Compression Test), IS 9537-2)	-	1000	20% Discount to BIS
13(External Influences, IS 9537-2)	-	4000	20% Discount to BIS
6.1(Marking, IS 9537-2)	-	0	price in above

06 Jun, 2027

-
INCLUDED W.E.F. 23-09-2020. For sizes 20mm to 50mm.

9242

KC INDIA TEST LABORATORIES LLP

9140406

IS 9968 : Part 1 (1988)

Specification for elastomer insulatedcables: Part 1 for working voltages up to and including 1100 volts (First Revision)

22950 View breakup
Single Core For General Services = 22950 /- Single Core For Heat Resisting Insulation = 22950 /- Single Core For Silicon Insulation = 22950 /- Single Core Sheathed Cable, General Services =22950.00 Single Core Sheathed Cable For Heat Resisting Insulation = 22950 /- Separated Wire Before Stranding (If Provided = 625.00) Each Additional Per Core Charge = 2500.00/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
13(CORE IDENTiFICATlON)	-	0	nil
12.2(Insulation : Thickness of Insufatien)	-	325	20% Discount to BIS
19.2(Sheath : Thickness of Sheath)	-	300	20% Discount to BIS
20( Overall diameter)	-	625	20% Discount to BIS
21. (a)(Persulphate tests (for copper))	-	1250	20% Discount to BIS
21. (b)(Annealing Test (for coper))	-	625	20% Discount to BIS
21. (c)( Tensile Test (for aluminium))	-	625	20% Discount to BIS
21. (d)( Wrapping Test (for aluminium))	-	625	20% Discount to BIS
21. (e)(Conductor Resistance )	-	625	20% Discount to BIS
21.1( Tensile strength )	-	625	20% Discount to BIS
22.1( Elongation)	-	625	20% Discount to BIS
21.1(type test : Ageing In air oven)	-	3125	20% Discount to BIS
21.1(type test : Ageing in air bomb)	-	3750	20% Discount to BIS
21.1(type test : Ageing In oxygen bomb)	-	3750	20% Discount to BIS
21.1(type test : Tear resistance )	-	1875	20% Discount to BIS
22.2(type test :Insulauon resistance High voltage (water immersron ) test)	-	1875	20% Discount to BIS
22.2(type test : Flammability test ( applicable to cables finished With SE 3 and SE 4 sheaths only) )	-	1250	20% Discount to BIS

06 Jun, 2027

-
INCLUDED W.E.F. 23-09-2020.

9243

KC INDIA TEST LABORATORIES LLP

9140406

IS 398 : Part 4 (1994)

Aluminium conductors for overhead transmission purposes: Part 4 aluminium alloy stranded conductors (Aluminium - Magnesium - Silicon Type) - Specification (Third Revision)

8900 View breakup
For 3 Strands Rs. 1225.00 For 7 Strands Rs. 2500.00 For 19 Strands Rs. 3750.00 For 37 Strands Rs. 5750.00 For 61 Strands Rs. 7400.00 Separated Wire Before Stranding (If Provided) Rs. 1500.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1 Table-1(Dimensional measurement of wires)	-	1250	20% Discount to BIS
9.2 Table 3(Lay Ratio of stranded conductors)	-	1250	20% Discount to BIS
12.2 Table 1(Breaking Load Test- Before Stranding)	-	1250	20% Discount to BIS
12.2 Table 1(Breaking Load Test- After Stranding)	-	1250	20% Discount to BIS
12.3 Table 1(Elongation Test- Before Stranding)	-	1250	20% Discount to BIS
12.3 Table 1(Elongation Test- After Stranding)	-	1250	20% Discount to BIS
7.2.2 Table-2, Table-4(Calculated resistance of Stranded Conductor)	-	1250	20% Discount to BIS

06 Jun, 2027

-
-

9244

KC INDIA TEST LABORATORIES LLP

9140406

IS 398 : Part 1 (1996)

Aluminium conductors for overhead transmission purposes - Specification: Part 1 aluminium stranded conductors (Third Revision)

5625 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12.2, Table-1(Measurement of diameter of individual aluminium wire)	-	1250	20% Discount to BIS
12.3, Table-1(Breaking load before stranding)	-	1250	20% Discount to BIS
12.3, Table-1(Breaking load after stranding)	-	1250	20% Discount to BIS
12.4(Wrapping test)	-	1250	20% Discount to BIS
12.5, Table 1(Resistance test)	-	1250	20% Discount to BIS
12.6, Table 3(Measurement of lay ratio)	-	1250	20% Discount to BIS

06 Jun, 2027

-
-

9245

BIS, Southern Regional Laboratory (SRL)

None

IS 739 (1992)

Wrought aluminium and aluminium alloys - Wire for general engineering purposes - Specification (Third Revision)

Rs.225/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.0 (Freedom from defects)	-
7.0 (Dimension and Tolerances)	-
9.1 (Tensile Strength)	-

-
" 1 m Excluding Excl Wrapping test. Chemical facility not available

9246

BIS, Southern Regional Laboratory (SRL)

None

IS 7138 (1973)

Specification for steel tubes for furniture purposes

RS/-300 Chemical View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1(Table 1) (WALL THICKNESS)	-
5 (WORKMANSHIP)	-
7 (STRAIGHTNESS)	-
8 (LENGTHS)	-
9.1 (Tensile Test)	-
9.2 (Bend test)	-
4 (DIMENSIONS)	-

-
" 3 m t. + 25g " Excluding Excl bend test and chemical tests

9247

BIS, Central Laboratory (CL)

None

IS 10908 (1991)

Flexible rubber tubing for liquefied petroleum gas - Specification (First Revision)

- View breakup
Rs.7800.00 (excluding testing charges for Resistance to Ozone test). * Testing facility not available at CL for Resistance for Ozone test.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.4.1 (The tubing made out of this material shall be green in colour )	-
Cl.4.2 (The walls shall be seamless and free from all visible such as lumps, blows-holes,cracks etc and the bore shall be clean and free from loose particles which might be carried forward by the gas)	-
Cl4.3.1 (The tubing shall be supplied in 6.4 and 7.0 mm inisde diametre,The tolerance on nominal diamtere shall be as per table 1)	-
Cl4.3.2 (it shall comply with the thickness as givien in table 1 when measured according to 4.2.2 of IS 443;1975 The readings shall be taken from different sample sections.)	-
Cl.4.4,(Cl.4.4.1) (when tested in accordance with the method given in AnnexureA. It shall fit over the standard and oversize metal nozzle shown in Fig1,2 and 3)	-
Cl.4.4,(Cl.4.4.2) (it shall remain atatched to both nozzles throught the test period)	-
Cl.4.5 (When immersed in water for 5 minutes under an internal air pressure of 0.25 Mpa or 250kPa (2.5 bar), the increase in the outside diametre of the tubing ,Also the same shall not burst when the pressure is increasded to 0.5 Mpa or 500 kpa (5 bar0, The test shall be carried out on a lengtj of 60 cm.)	-
Cl.4.6 (Shore Hardness: the hardnesss on the flatsurface of the cut/slit tubing shall be measured and the same shall be 60 ± 5˚A)	-
Cl.4.7 (Accelerated Ageing test, the flexible tubing or suitable portion of the tubing shall be subjected to accelerated ageing at a temperature of 100Deg Cfor 72 hours in accordance with the method prescribed in IS 3400 (Part 4) it shall not show a change of + 10 A of its orignal shore hardness )	-
Cl.4.8.1 (Flexible test , Annexure B The gas pressure shown on the manometre shall not drop by more than 1 Kpa)	-
Cl4.8.2 (The tubing shall be so flexible that it will make contact with a cylinder former of radius 68 mm for at least 110 deg of its circumference when the tubing is placed over the framer and a mass of 1.6 kg is attcahed to each end)	-
Cl.4.9 (Crushing test , )	-
Cl.4.10 (Resistance to lpg ,Annexure c Shall not be more than 15 % of the initial mass of the tubing and the amount of exctractable matter shall not excced 10 percent of the iniital mass of te tubing)	-
Cl.4.12 (Burning behaviour on exposure to small flame,Annexure E tubing shall not burn to either of the outer marks within the test period of 45 seconds)	-

-
EXCLUDING -; Test facility not avalible For ozone test

9248

BIS, Southern Regional Laboratory (SRL)

None

IS 410 (1977)

Specification for cold rolled brass sheet, strip and foil (Third Revision)

1500/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.0 (Freedom from defects)	-
Table-2 (Tensile Strength)	-
Table-2 (Thickness)	-
Table-2 (Elongation)	-

-
"0.5 sq m " Excluding except material test,Cupping test, hardness test

9249

BIS, Eastern Regional Laboratory (ERL)

None

IS 7903 (2017)

Textiles – Tarpaulins made from high density polyethylene (HDPE) woven fabrics – Specification (fifth revision)

for all Type

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.4 ( Line/ Cord beading IS 7903)	-
5.1.1 (Lamination IS 7903)	-
5.1.2 (Lamination IS 7903)	-
5.2.1 (Construction IS 7903)	-
5.2.1 (Construction IS 7903)	-
5.2.1 (Construction IS 7903)	-
5.2.1 (Construction IS 7903)	-
5.2.1 (Construction IS 7903)	-
5.2.1 (Construction IS 7903)	-
5.2.1 (Construction IS 7903)	-
5.2.1 (Construction IS 7903)	-
5.3 (Joint/Seam, IS 7903)	-
5.4 (Fixing of Eyelets, IS 7903)	-
5.4 (Fixing of Eyelets ,IS 7903)	-
6.1 Table 1,i) (No of HDPE fabric layers ,IS 7903)	-
6.1 Table 1,ii) (No of lamination layers, IS 7903)	-
6.1 Table 1, iii) (Total no of layers in the finished tarpaulin, IS 7903)	-
6.1 Table 1,iv) (Mass of finished tarpaulin, Annex B ,IS 7903)	-
6.1 Table 1,v) (Mass of laminated fabric, Annex C , IS 7903)	-
6.1 Table 1vi) (Breaking strength before UV exposure,warp ,IS 1969 Part 1)	-
6.1 Table 1vi) (Breaking strength before UV exposure,weft, IS 1969 part 1)	-
6.1 Table 1 ix) (Welded seam strength before UV exposure (Weft) , IS 1969 Part 1)	-
6.1 Table 1 vii) (Elongation at break of fabric,warp, IS 1969 Part 1)	-
6.1 Table 1 vii) (Elongation at break of fabric,weft, IS 1969 Part1)	-
6.2 (Length, IS 7903)	-
6.2 (Width, IS 7903)	-
6.2 (height, IS 7903)	-
6.1 Table 1 xv) (Ash Content, Annex F of IS 7903)	-
4.0 (Types IS 7903)	-

-
Except Water proffness test set up; UV exposure test; Impact failure test ;Colour fastness to light, trapozoid tear strength, puncture resistance

9250

BIS, Central Laboratory (CL)

None

IS 9573 : Part 2 (2017)

Rubber hose for liquefied petroleum gas (Lpg) - Specification: Part 2 domestic and commercial application (Fourth Revision)

Rs. 7695/ View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 4.2.1 (Lining)	-
Clause 4.2.2 (a) (Reinforcement)	-
Clause 4.2.2 (b) (Reinforcement)	-
Clause 4.2.3 (Cover)	-
Clause 4.3 Sub Clause 4.3.1 Table 1 (Bore Size)	-
Clause 4.3 Sub Clause 4.3.2 (a) (Thickness of Lining and Cover)	-
Clause 4.3 Sub Clause 4.3.2 (b) (Thickness of Lining and Cover)	-
Clause 4.3 Sub Clause 4.3.3 (Length)	-
Clause 4.4 Sub Clause 4.4.1 Table 2 (i) (a) (Tensile Strength- Lining)	-
Clause 4.4 Sub Clause 4.4.1 Table 2 (i) (b) (Tensile Strength- cover)	-
Clause 4.4 Sub Clause 4.4.1 Table 2 (ii) (a) (Elongation at break- Lining)	-
Clause 4.4 Sub Clause 4.4.1 Table 2 (ii) (b) (Elongation at break- Cover)	-
Clause 4.4 Sub Clause 4.4.2 (a) (Accelerated Ageing Test lining)	-
Clause 4.4 Sub Clause 4.4.2 (b) (Accelerated Ageing Test lining)	-
Clause 4.4 Sub Clause 4.4.2 (a) (Accelerated Ageing Test cover)	-
Clause 4.4 Sub Clause 4.4.2 (b) (Accelerated Ageing Test cover)	-
Clause 4.4 Sub Clause 4.4.3 (a) (Resistance of Lining to n-pentane)	-
Clause 4.4 Sub Clause 4.4.3 (b) (Resistance of Lining to n-pentane)	-
Clause 4.5 Sub clause 4.5.2 (Low Temperature Flexibility)	-
Clause 4.5 Sub clause 4.5.3 (Flexibility of Hose)	-
Clause 4.5 Sub clause 4.5.5 4.5.5.1 (Proof pressure test)	-
Clause 4.5 Sub clause 4.5.5 4.5.5.2 (Bursting pressure)	-
Clause 4.5 Sub clause 4.5.6 (Grip Strength Test)	-
Clause 4.5 Sub clause 4.5.7 (Burning Behaviour)	-

-
EXCLUDING -; Test facility not avalible For ozone test

9251

BIS, Southern Regional Laboratory (SRL)

None

IS 319 (2007)

Free cutting brass bars, rods and section - Specification (Fifth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.0 (Freedom from defects)	-
7.0 (Dimension and Tolerances)	-
9.1 Table-2 (Tensile Strength)	-
9.1 Table-2 (Elongation)	-
9.2 (Vickers Hardness)	-

-
1 m . Excluding except chemical tests (Tensile test Facility available till 20mm only)

9252

AADCO TESTING & RESEARCH LABORATORY PVT LTD

8141606

IS 16415 (2015)

Composite cement - Specification

ALL GRADES

4025 View breakup
Rs.4025/- for Mechanical + Chemical (10% discount to BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7 and Table 3 i(Fineness IS 4031(Part 2))	-	300	-
7 and Table 3 ii a(Soundness, Le-Chate1ier expansion IS 4031(Part 3) )	-	250	-
7 and Table 3 ii b(Soundness, Autoclave expansion IS 4031(Part 3) )	-	250	-
7 and Table 3 iii a(Setting Time ( by Vicat Apparatus), Initial IS 4031(Part 5))	-	150	-
7 and Table 3 iii b(Setting Time ( by Vicat Apparatus ), Final IS 4031(Part 5))	-	150	-
7 and Table 3 iv a(Compretsive Strenqth .72 ± 1 hr IS 4031(Part 6))	-	150	-
7 and Table 3 iv b(Compretsive Strenqth 168 ± 2 hr IS 4031(Part 6))	-	150	-
7 and Table 3 iv c(Compretsive Strenqth 672 ± 4 hr IS 4031(Part 6))	-	200	-
7 and Table 3 v(Drying shrinkage IS 4031(Part 10))	-	300	-
6 -Table - 2 i(Insoluble residue - Cl 4.10 of IS 4032:1985)	-	350	-
6 -Table - 2 ii(Magnesia - Cl 4.8 of IS 4032:1985)	-	350	-
6 -Table - 2 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-	350	-
6 -Table - 2 iv(Sulphide sulphur (S) - Cl 6.12 of IS 4032:1985)	-	400	-
6 -Table - 2 v(Loss on ignition - Cl 4.2 of IS 4032:1985)	-	325	-
6 -Table - 2 vi(Chloride content - Cl 4.13 of IS 4032:1985)	-	350	-

26 Jul, 2027

-
Except Transverse Strength

9253

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING AND TECHNOLOGY (CIPET):CSTS-BHOPAL

8100534

IS 6590 (1972)

Specification for braided nylon rope for mountaineering purposes

8450 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1, Table 1,(Diameter of Rope,Annex 4)	-	550	Lenth of coil
3.1/3.1.1(Manufacture of Yarn)	-	2000	3.1.1 Material Identification
4.1, Table 1(No of ends per Spindle)	-	300	-
3.1/3.1.1, Refer table 1(Approximate count of the yarn in the core and sheath together)	-	300	-
4.1, Table 1(Univershal count(or Denier ) of yarn(Approx)- Core)	-	250	-
4.1, Table 1(Univershal count(or Denier ) of yarn(Approx)- Sheath)	-	500	-
4.1, Table 1(Linear density -Refer Annex 3)	-	500	-
4.1, Table 1(Breaking load on 45 cm Test length-Refer Annex 5)	-	1350	-
4.1, Table 1(Elongation at 20% load -Refer Annex 5)	-	2450	-
4.1, Table 1(Angle of sag -refer annex 7 )	-	600	-
4.2(Slackness of Sheath-Refer Annex 8)	-	1100	-
3.1.2(Manufacture of Yarn)	-	950	Filler Content

31 Dec, 2026

-
Included w.e.f. 27-05-2022.

9254

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING AND TECHNOLOGY (CIPET):CSTS-BHOPAL

8100534

IS 7903 (2017)

Textiles – Tarpaulins made from high density polyethylene (HDPE) woven fabrics – Specification (fifth revision)

50450 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.4( Line/ Cord beading IS 7903)	-	250	Nil
4.0(Types IS 7903)	-	250	Nil
5.1.1(Lamination IS 7903)	-	1050	Nil
5.1.2(Lamination IS 7903)	-	1050	Nil
5.2.1(Construction IS 7903)	-	250	Nil
5.2.1(Construction IS 7903)	-	250	Nil
5.2.1(Construction IS 7903)	-	0	Charges already taken in clause no. 5.2.1
5.2.1(Construction IS 7903)	-	0	Charges already taken in clause no. 5.2.1
5.2.1(Construction IS 7903)	-	0	Charges already taken in clause no. 5.2.1
5.2.1(Construction IS 7903)	-	0	Charges already taken in clause no. 5.2.1
5.2.1(Construction IS 7903)	-	0	Charges already taken in clause no. 5.2.1
5.3(Joint/Seam, IS 7903)	-	250	Nil
5.4(Fixing of Eyelets, IS 7903)	-	250	Nil
5.4(Fixing of Eyelets ,IS 7903)	-	0	Charges already taken in clause no. 5.4
6.1 Table 1,i)(No of HDPE fabric layers ,IS 7903)	-	250	Nil
6.1 Table 1,ii)(No of lamination layers, IS 7903)	-	0	Charges already taken in clause no. 6.1
6.1 Table 1, iii)(Total no of layers in the finished tarpaulin, IS 7903)	-	0	Charges already taken in clause no. 6.1
6.1 Table 1,iv)(Mass of finished tarpaulin, Annex B ,IS 7903)	-	500	Nil
6.1 Table 1,v)(Mass of laminated fabric, Annex C , IS 7903)	-	0	Charges already taken in clause no. 6.1
6.1 Table 1vi)(Breaking strength before UV exposure,warp ,IS 1969 Part 1)	-	1100	Nil
6.1 Table 1vi)(Breaking strength before UV exposure,weft, IS 1969 part 1)	-	0	Charges already taken in clause no. 6.1
6.1 Table 1 vii)(Elongation at break of fabric,warp, IS 1969 Part 1)	-	1100	Nil
6.1 Table 1 vii)(Elongation at break of fabric,weft, IS 1969 Part1)	-	0	Charges already taken in clause no. 6.1
6.1 Table 1 viii)(Retention of breaking strength after UV exposure of 144h Warp, IS 13162 part 2& IS 1969 Part1 )	-	1100	Nil
6.1 Table 1 viii)(Retention of breaking strength after UV exposure of 144h Weft , IS 13162 part 2& IS 1969 Part1 )	-	29950	Test charge Rs. 2200/- plus UV exposure charges Rs. 27750/-
6.1 Table 1 ix)(Welded seam strength before UV exposure (Weft) , IS 1969 Part 1)	-	1100	Nil
6.1 Table 1 x)(Retention of welded seam strength after UV exposure of 144h(Weft) ,IS 13162 part 2& IS 1969 Part1 )	-	1100	Nil
6.1 Table 1 xi)(Trapezoidal tear strength, IS 14293)	-	1100	Nil
6.1 Table 1 xii)(Puncture Resistance, Annex D of IS 7903)	-	1100	Nil
6.1 Table 1 xiii)(Impact Failure load , at 1524 mmdrop, Annex E of IS 7903)	-	1100	Nil
6.1 Table 1 xiv)(Color fastness to light (For color Tarpulines) , IS 2454)	-	850	Nil
6.1 Table 1 xv)(Ash Content, Annex F of IS 7903)	-	950	Nil
6.2(Length, IS 7903)	-	250	Nil
6.2(Width, IS 7903)	-	250	Nil
6.2(height, IS 7903)	-	0	Charges already taken in clause no. 6.2
6.3(Water Proofness,IS 7941)	-	1000	Nil
6.3(Water Proofness, IS 7940)	-	5200	Test charge Rs. 1000/- plus ageing charges Rs. 4200/-
6.2(dimension(l))	-	0	Charges already taken in clause no. 6.2
6.2(dimension(w))	-	0	Charges already taken in clause no. 6.2
6.2(dimension(h))	-	0	Charges already taken in clause no. 6.2

31 Dec, 2026

-
-

9255

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING AND TECHNOLOGY (CIPET):CSTS-BHOPAL

8100534

IS 9755 (2016)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packing fertilizers – Specification (fifth revision)

18548 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(MANUFACTURE-Raw Material- IS 10146 or IS 10910)	-	1050	Material Identification
3.1(MANUFACTURE-Raw Material)	-	750	Fabric (tape width), Linear Density
3.2(MANUFACTURE-)	-	300	Sacks (Visual Appearance)
3.3(Sacks)	-	300	Visual Appearance (Liner)
3.3.1(Sacks-Table 1)	-	0	Visual Appearance (Liner)
3.4(Liner)	-	0	Identification
3.4.1(Liner)	-	0	GSM & Overlap dimension
3.4.2(Lamination)	-	1800	Identification, GSM, Overlap dimension
3.5(Bottom Seam-(see IS 10789).)	-	1300	Seam (Dimension), Identification (Stitching Material)
3.6.1(Bottom Seam-)	-	0	Opacity
3.7(Mouth of the Sack)	-	250	Capacity
3.8(Capacity- The sack shall have the nominal capacity of 50 kg.)	-	0	Capacity
4.2(UV Resistance)	-	0	UV Resistance(144 hrs)* (100x60+44x40)
4.2(UV Resistance-The HDPE/PP woven fabric of sack made out of UV stabilized material shall have at least 50 percent of the original breaking strength when tested after the same has been exposed to UV radiation and weathering as per the method given in Annex D.)	-	2700	Avg. Breaking Strength & Elongation at break of Fabric after UV radiation & weathering, Length wise, Widthwise
4.3(Mass-(Annexure E))	-	250	Mass
3.6(Bottom Seam-The number of stitches/dm shall be 14 ± 2.)	-	0	-
3.4(Liner-The thickness(A-2 of IS 2508) shall be 40 μm ± 10 percent in case of HMHDPE/ HDPE.)	-	0	-
3.4(Liner-The thickness(A-2 of IS 2508) shall be 70 μm ± 10 percent in case of LDPE/LLDPE)	-	0	-
3.5(Bottom Seam-The two rows of stitches shall be separated from each other by minimum 5 mm)	-	0	-
3.6(Bottom Seam-the outer stitch shall be minimum 8 mm from the outer edge of the sacks.)	-	0	-
3.4(Liner-The width of the loose liner shall be minimum 20 mm more than the width of the sack.)	-	0	-
3.4.2(Liner-The bottom seal of the loose liner shall be at least 25 mm from the bottom edge.)	-	0	-
3.6(Bottom Seam-tThe stitching shall be done with double fold over seam to a depth of minimum 25 mm, so that the stitches pass through a minimum of six layers of the fabric.)	-	0	-
3.1(MANUFACTURE-Raw Material- IS 10146 or IS 10910)	-	0	-
3.1(MANUFACTURE-Raw Material)	-	0	-
3.2(MANUFACTURE-)	-	0	-
3.3(Sacks)	-	0	-
3.3.1(Sacks-Table 1)	-	0	-
3.4(Liner)	-	0	-
3.4.1(Liner)	-	0	-
3.4.2(Lamination)	-	0	-
3.5(Bottom Seam-(see IS 10789).)	-	0	-
3.6.1(Bottom Seam-)	-	0	-
3.7(Mouth of the Sack)	-	0	-
3.8(Capacity- The sack shall have the nominal capacity of 50 kg.)	-	0	-
4.2(UV Resistance)	-	0	-
4.2(UV Resistance-The HDPE/PP woven fabric of sack made out of UV stabilized material shall have at least 50 percent of the original breaking strength when tested after the same has been exposed to UV radiation and weathering as per the method given in Annex D.)	-	0	-
4.3(Mass-(Annexure E))	-	0	-
3.6(Bottom Seam-The number of stitches/dm shall be 14 ± 2.)	-	0	-
3.4(Liner-The thickness(A-2 of IS 2508) shall be 40 μm ± 10 percent in case of HMHDPE/ HDPE.)	-	0	-
3.4(Liner-The thickness(A-2 of IS 2508) shall be 70 μm ± 10 percent in case of LDPE/LLDPE)	-	0	-
3.5(Bottom Seam-The two rows of stitches shall be separated from each other by minimum 5 mm)	-	0	-
3.6(Bottom Seam-the outer stitch shall be minimum 8 mm from the outer edge of the sacks.)	-	0	-
3.4(Liner-The width of the loose liner shall be minimum 20 mm more than the width of the sack.)	-	0	-
3.4.2(Liner-The bottom seal of the loose liner shall be at least 25 mm from the bottom edge.)	-	0	-
3.6(Bottom Seam-tThe stitching shall be done with double fold over seam to a depth of minimum 25 mm, so that the stitches pass through a minimum of six layers of the fabric.)	-	0	-
4.1 , Table 1(REQUIREMENTS)	-	0	Dimensions (Inside length & width)-250 Ends per dm-250 Picks per dm-250 Mass of Sack (GSM)-500 Avg. Breaking Strength & Elongation at break of Fabric: Lengthwise-1350 widthwise-1100 Min. Breaking Strength of Bottom Seam-1350
3.1(MANUFACTURE-Raw Material- IS 10146 or IS 10910)	-	0	-
3.1(MANUFACTURE-Raw Material)	-	0	-
3.2(MANUFACTURE-)	-	0	-
3.3(Sacks)	-	0	-
3.3.1(Sacks-Table 1)	-	0	-
3.4(Liner)	-	0	-
3.4.1(Liner)	-	0	-
3.4.2(Lamination)	-	0	-
3.5(Bottom Seam-(see IS 10789).)	-	0	-
3.6.1(Bottom Seam-)	-	0	-
3.7(Mouth of the Sack)	-	0	-
3.8(Capacity- The sack shall have the nominal capacity of 50 kg.)	-	0	-
4.2(UV Resistance)	-	8260	UV Resistance(144 hrs)* (100x60+44x40),
4.2(UV Resistance-The HDPE/PP woven fabric of sack made out of UV stabilized material shall have at least 50 percent of the original breaking strength when tested after the same has been exposed to UV radiation and weathering as per the method given in Annex D.)	-	2200	Avg. Breaking Strength & Elongation at break of Fabric after UV radiation & weathering, Length wise, Widthwise
4.3(Mass-(Annexure E))	-	250	Mass
3.6(Bottom Seam-The number of stitches/dm shall be 14 ± 2.)	-	0	-
3.4(Liner-The thickness(A-2 of IS 2508) shall be 40 μm ± 10 percent in case of HMHDPE/ HDPE.)	-	0	-
3.4(Liner-The thickness(A-2 of IS 2508) shall be 70 μm ± 10 percent in case of LDPE/LLDPE)	-	0	-
3.5(Bottom Seam-The two rows of stitches shall be separated from each other by minimum 5 mm)	-	0	-
3.6(Bottom Seam-the outer stitch shall be minimum 8 mm from the outer edge of the sacks.)	-	0	-
3.4(Liner-The width of the loose liner shall be minimum 20 mm more than the width of the sack.)	-	0	-
3.4.2(Liner-The bottom seal of the loose liner shall be at least 25 mm from the bottom edge.)	-	0	-
3.6(Bottom Seam-tThe stitching shall be done with double fold over seam to a depth of minimum 25 mm, so that the stitches pass through a minimum of six layers of the fabric.)	-	0	-
4.1 , Table 1(REQUIREMENTS)	-	4800	Dimensions (Inside length & width)-500 Ends per dm-250 Picks per dm-250 Mass of Sack (GSM)-500 Avg. Breaking Strength & Elongation at break of Fabric; Lengthwise-1350; widthwise-1100 Min. Breaking Strength of Bottom Seam-1350

31 Dec, 2026

-
-

9256

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING AND TECHNOLOGY (CIPET):CSTS-BHOPAL

8100534

IS 10146 (1982)

Specification for polyethylene for its safe use in contact with foodstuffs, pharmaceuticals and drinking water zy

2688 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Basic Resin -)	-	1050	-
3.2(Material )	-	0	-
3.3(Pigments and Colourants )	-	0	-
3.4(Overall Migration)	-	2325	-

31 Dec, 2026

-
Included w.e.f. 27-05-2022.

9257

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING AND TECHNOLOGY (CIPET):CSTS-BHOPAL

8100534

IS 11066 (2014)

Fibre ropes ¬– Polyester 3-, 4-, 8- and 12- strand ropes (second revision)

7250.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Designation)	-	2000.00	-
5(General requirements)	-	2000.00	-
5.1 Fig. 1 / Fig. 2 / Fig. 3 / Fig. 4(Polyester ropes shall be made in one of the following constructions:)	-	0	-
5.2 Cl.4 of IS/ISO 9554(Construction &manufacture)	-	600.00	-
5.2 Cl.5 of IS/ISO 9555(Lay)	-	250.00	-
5.2 Cl.7 of IS/ISO 9556(Labelling and Marking)	-	250.00	-
5.2 Cl.8 of IS/ISO 9557(Packaging, invoicing and delivery lengths)	-	0	Test charge is already included in 5.2 cl.7
6 Table 1 / Table 2 / Table 3(Linear density)	-	500.00	-
6 Table 1 / Table 2 / Table 3(Minimum breaking force a) Unspliced ropes)	-	1100.00	-
6 Table 1 / Table 2 / Table 4(Minimum breaking force b) Ropes with eye-spliced terminations)	-	0	Test charge is already included in clause number 6. Minimum breaking force a) Unspliced ropes
6 Table 1 / Table 2 / Table 3(Minimum breaking force a) Unspliced ropes)	-	0	Test charge is already included in clause number 6. Minimum breaking force a) Unspliced ropes
6 Table 1 / Table 2 / Table 4(Minimum breaking force b) Ropes with eye-spliced terminations)	-	0	Test charge is already included in clause number 6. Minimum breaking force a) Unspliced ropes
6 Table 1 / Table 2 / Table 3(Minimum breaking force a) Unspliced ropes)	-	0	Test charge is already included in clause number 6. Minimum breaking force a) Unspliced ropes

31 Dec, 2026

-
Included w.e.f. 27-05-2022.

9258

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING AND TECHNOLOGY (CIPET):CSTS-BHOPAL

8100534

IS 14399 : Part 1 and 2 (1996)

Hot Press Moulded Thermosetting Glass Fibre Reinforced Polyester Resin (GRP) Sectional Water Storage Tanks : Part 1 palels, Part 2 Guidelines for assembly, installation and test

10825 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Flange of Panels)	-	250	-
6.1.1(Flange of Panels)	-	0	-
6.2(Flange of Panels)	-	0	-
6.3(Flange of Panels)	-	0	-
6.4(Type/Thickness of panel)	-	250	-
7.0(Visual inspection of the panels)	-	300	-
8, Table-1, Annex-B(Tensile Strength)	-	1600	-
8, Table-1, Annex-C(Bending strength)	-	1600	-
8, Table-1, Annex-D(Elastic moduius in Bend)	-	1600	-
8, Table-1, Annex-E(Glass Content)	-	950	-
8, Table-1, Annex-F(Barcoal Hardness)	-	375	-
8, Table-1, Annex-G(Water Absorption)	-	1100	-
9, Annex-H(Hydrostatic Test)	-	850	-
10.0(Deflection Test)	-	1100	-
Clause 11.3 annex J(As)	-	0	-
Clause 11.3 annex J(Cd )	-	0	-
Clause 11.3 annex J(Cr)	-	0	-
Clause 11.3 annex J(Pb)	-	0	-
Clause 11.3 annex J(Se)	-	0	-
5.0(DimensionSof Tank)	-	0	-
6.2(Assembly)	-	0	-
7.0(Leakage Test)	-	850	-

31 Dec, 2026

-
-

9259

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING AND TECHNOLOGY (CIPET):CSTS-BHOPAL

8100534

IS 14483 : Part 1 (1997)

Fertilizer and chemical injecfion system: Part 1 venturi injector

6375 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(CONSTRUCTIONAL REQUIREMENTS)	-	500	-
4.2(CONSTRUCTIONAL REQUIREMENTS)	-	0	-
4.3(CONSTRUCTIONAL REQUIREMENTS)	-	0	-
4.4(CONSTRUCTIONAL REQUIREMENTS)	-	0	-
3.1(Material - The Venturi Injector parts that are in contact with water shall be of non toxic materials and shall be resistant to or protected against degradation caused by operating conditions and types of water, chemicals or other additive solutions used in agricultural irrigation or used for cleaning the system)	-	0	-
4.5(CONSTRUCTIONAL REQUIREMENTS)	-	0	-
4.6(CONSTRUCTIONAL REQUIREMENTS)	-	0	-
5.1(Resistance of Venturi Injector to Internal Hydrostatic Pressure)	-	1000	-
5.2(Performance Test)	-	7000	5.2.1 (i) Motive flow & suction rate of test liquid = 3500/- 5.2.1 (ii) Minimum pressure drop = 3500/-

31 Dec, 2026

-
Included w.e.f. 27-05-2022.

9260

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING AND TECHNOLOGY (CIPET):CSTS-BHOPAL

8100534

IS 14611 (2016)

Multilayered cross laminated sheets/tarpaulins/covers/agricultural films - Specification (First Revision)

39005 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 6.1(Workmanship)	-	250	-
Cl. 6.3(Accelerated ageing test)	-	4200	-
Cl. 6.4(water proofness test)	-	1000	-
Cl. 6.5(Strenght of joints/seams)	-	1100	-
Cl. 6.6(Flex test)	-	7200	Included Flex Test (After Ageing)50000 Cycles* - 1500.00/-
Cl. 7.1(Eyelets and rope lashing)	-	500	Included Ease of in-sito Repair 250/-
Cl 5(Construction)	-	1675	Included Carbon black content - 925/-, Panel - 250/-, Ends & sides dimension - 250/-, Panel Length & Width - 250/-
Table1 - v)(Dart Impact Strength)	-	850	-
Table1 - vi)(Average Tensile Strength & Elongation at Break after Exposing to UV Radiation & Weathering)	-	2200	-
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (a)(Tear strenght, Annex-F, Grade- LN light)	-	2200	Longitudinal Direction , Transverse Direction
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (b)(Tear strenght, Annex-F, Grade- MN Medium)	-	2200	Longitudinal Direction , Transverse Direction
Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (a)(Tear strenght, Annex-F, Grade- HN Heavy)	-	2200	Longitudinal Direction , Transverse Direction
Cl. 6.2,6.3,6.8, table no. 1 Sl No. (vi)(Average tensile strenght and elongation at break after exposing to UV radiation and weathering, Annex- G, Grade- LN light)	-	1100	Longitudinal Direction , Transverse Direction
Cl. 6.2,6.3,6.8, table no. 1 Sl No. (vi)(Average tensile strenght and elongation at break after exposing to UV radiation and weathering, Annex- G, Grade- MN Medium)	-	1100	Longitudinal Direction , Transverse Direction
Cl. 6.2,6.3,6.8, table no. 1 Sl No. (vi)(Average tensile strenght and elongation at break after exposing to UV radiation and weathering, Annex- G, Grade- HN Heavy)	-	10180	UV Exposure

31 Dec, 2026

-
-

9261

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING AND TECHNOLOGY (CIPET):CSTS-BHOPAL

8100534

IS 14968 (2015)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packing 50 Kg/25 kg sugar – Specification (first revision)

17880 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Raw Material)	-	1050	-
4.2(Tapes – Width IS 6192 and IS 11197)	-	250	-
4.2(Tapes – Linear Density )	-	500	-
4.3(Sacks)	-	300	-
4.3.1(Bottom Seam)	-	300	-
4.3.1(The two rows of stitches shall be separated from each other)	-	0	-
4.3.1( The outer stitch)	-	0	-
4.3.1( The stitching shall be done with double fold over seam to a depth )	-	0	-
4.3.1(Stitches pass through a minimum of six layers of the fabric. )	-	0	-
4.3.1(stitches/dm)	-	0	-
4.3.2(Mouth)	-	0	-
4.4(Mass of the loose liner )	-	0	-
4.4(Width of the loose liner)	-	0	-
4.4(Length of the line)	-	0	-
4.4(Bottom seam of the loose liner)	-	0	-
4.5 and Table 1 i(Capacity)	-	250	-
5.2 and Table 1 ii a(Dimensions Inside Length)	-	0	Testing charge is already taken in 5.2 clause of Dimension of Inside width.
5.2 and Table 1 ii b(Dimensions Inside Width)	-	250	-
5.2 and Table 1 iii(Ends per dm )	-	250	-
5.2 and Table 1 iv(Picks per dm )	-	250	-
5.1 and Table 1 v b(Mass of unlaminated sack with liner )	-	300	-
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise IS 1969 (Part 1))	-	1100	-
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise IS 1969 (Part 1))	-	1100	-
5.2 and Table 1 vi(Breaking strength of bottom seam IS 9030 )	-	1100	-
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise IS 1969 (Part 1))	-	0	-
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	10180	-
5.2 and Table 1 x(Ash content )	-	950	-

31 Dec, 2026

-
-

9262

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING AND TECHNOLOGY (CIPET):CSTS-BHOPAL

8100534

IS 15354 : Part 1 (2018)

Single - Use medical examination gloves: Part 1 specification for gloves made from rubber latex or rubber solution (First Revision)

8950 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1 & Table 2(Width corresponding to size code (dimension w,Figure 1))	-	500	-
6.2(Watertightness)	-	1000	-
6.3.2 & Table 3(Minimum force at break before accelerated ageing)	-	4200	-
6.3.3 & Table 3(Minimum force at break after accelerated ageing)	-	1350	-
6.3.2 & Table 3(Minimum Elongation at break before accelerated ageing)	-	0	-
6.3.3 & Table 3(Minimum Elongation at break after accelerated ageing)	-	1100	-

31 Dec, 2026

-
Included w.e.f. 27-05-2022.

9263

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING AND TECHNOLOGY (CIPET):CSTS-BHOPAL

8100534

IS 15778 (2007)

Chlorinated polyvinyl chloride (Cpvc) pipes for potable hot and cold water distribution supplies - Specification

157725 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5 Table 1(Classification of pipes)	-	300	-
6.2.1 Annex B(Chloride Content of Resin)	-	4300	-
6.3(Compound Properties)	-	4300	-
6.3.1 Annex B(Chloride content)	-	0	CHARGES IS ALREADY HAS TAKEN IN CLAUSE NO. 6.2.1.
6.3.2 Annex C(Verification of the Malfunction Temperature, Tmal: )	-	11000	RUPEES 11,000/- FOR TESTING CHARGES AND RUPEES 300/- FOR SPECIMEN/CONDITIONING CHARGES*
6.3.2 IS 13360 (Part 3/See 1)(Density)	-	500	-
7.1 IS 12235 (Part 1) Table 2(Dimension of Pipes: Mean outside Diameter)	-	500	-
7.1,7.1.1 IS 12235 (Part 1) Table 2(Outside Diameter at any point)	-	0	CHARGES ALREADY HAS TAKEN IN 7.1 IS 12235 (Part 1) Table 2 (Dimension of Pipes)
7.1.2 IS 12235 (Part 1) Table 2(Wall Thickness )	-	0	CHARGES ALREADY HAS TAKEN IN 7.1 IS 12235 (Part 1) Table 2 (Dimension of Pipes)
7.1.3 (Effective length)	-	0	CHARGES ALREADY HAS TAKEN IN 7.1 IS 12235 (Part 1) Table 2 (Dimension of Pipes)
8(Pipe Ends)	-	300	-
9(PHYSICAL AND CHEMICAL CHARACTERISTICS)	-	0	-
9.1(Visual Appearance)	-	0	CHARGES ALREADY HAS TAKEN IN CLAUSE NO. 8
9.2 IS 12235 (Part 3)(Opacity)	-	575	-
Cl. 9.3,IS 4985 Cl. 10.3(Lead (first extraction))	-	3000	-
Cl. 9.3,IS 4985 Cl. 10.3(Lead (third extraction))	-	0	CHARGES ALREADY HAS TAKEN IN CLAUSE NO. Cl. 9.3,IS 4985 Cl. 10.3
Cl. 9.3,IS 4985 Cl. 10.3(Dialkyl tin C4 and higher homologues measured as tin (third extraction))	-	0	CHARGES ALREADY HAS TAKEN IN CLAUSE NO. Cl. 9.3,IS 4985 Cl. 10.3
Cl. 9.3,IS 4985 Cl. 10.3(Cadmium (for all three extracts) )	-	0	CHARGES ALREADY HAS TAKEN IN CLAUSE NO. Cl. 9.3,IS 4985 Cl. 10.3
Cl. 9.3,IS 4985 Cl. 10.3(Mercury (for all three extracts) )	-	0	CHARGES ALREADY HAS TAKEN IN CLAUSE NO. Cl. 9.3,IS 4985 Cl. 10.3
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances such as 'di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate' (third extraction) )	-	0	CHARGES ALREADY HAS TAKEN IN CLAUSE NO. Cl. 9.3,IS 4985 Cl. 10.3
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances including di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate')	-	0	CHARGES ALREADY HAS TAKEN IN CLAUSE NO. Cl. 9.3,IS 4985 Cl. 10.3
9.4 IS 12235(Part 5/Sec 1 and Sec 2)(Reversion Test : When tested by the method prescribed in IS 12235(Part 5/Sec 1 and Sec 2), a length of pipe 200 + 20 mm long shall not alter in length by more than 5 percent.)	-	700	-
9.5 IS 12235(Part 2)(Vicat Softening Temperature: When tested by the method prescribed in IS 12235(Part 2), the Vicat softening temperature of the specimen shall not be less than 110°C.)	-	1100	-
9.6 IS 12235(Part 14)(Density)	-	500	-
10(Mechanical Properties)	-	0	-
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	16650	-
10.2 Table 3 IS 12235 (Part 8/Sec 1)(Thermal Stability by Hydrostatic Pressure Testing)	-	110500	RUPEES 1,000/- FOR TESTING CHARGES AND RUPEES 1,09,500/- FOR SPECIMEN/CONDITIONING CHARGES*
10.3 IS 4985 Table 4(Resistance to External Blow at O°C: When tested by the method prescribed in IS 4985, with classified striker mass and drop height as given in Table 4, the pipe shall have a true impact rate of not more than 10 percent.)	-	1400	RUPEES 1,100/- FOR TESTING CHARGES AND RUPEES 300/- FOR SPECIMEN/CONDITIONING CHARGES*
10.4 IS 12235(Part 19)(Flattening Test)	-	500	-
10.5 IS 12235(Part 13)(Tensile Strength : When tested by the method prescribed in IS 12235(Part 13), the tensile strength at yield shall not be less than 50 MPaat 27±2°C. )	-	1600	RUPEES 1,100/- FOR TESTING CHARGES AND RUPEES 500/- FOR SPECIMEN/CONDITIONING CHARGES*
7.1.2(Wall Thickness (Maximum))	-	0	CHARGES ALREADY HAS TAKEN IN 7.1 IS 12235 (Part 1) Table 2 (Dimension of Pipes)
7.1.1(Outside Diameter at any point (Maximum))	-	0	CHARGES ALREADY HAS TAKEN IN 7.1 IS 12235 (Part 1) Table 2 (Dimension of Pipes)
5 Table 1(Classification of pipes)	-	0	CHARGES HAS ALREADY TAKEN IN CLAUSE - 5 Table 1 (Classification of pipes).
6.2.1 Annex B(Chloride Content of Resin)	-	0	CHARGES HAS ALREADY TAKEN IN CLAUSE - 6.2.1 ANNEX B (CHLORIDE CONTENT OF RESIN)
6.3(Compound Properties)	-	0	CHARGES HAS ALREADY TAKEN IN CLAUSE - 6.3 (COMPOUND PROPERTIES)
6.3.1 Annex B(Chloride content)	-	0	CHARGES HAS ALREADY TAKEN IN CLAUSE - 6.3.1 ANNEX - B
6.3.2 IS 13360 (Part 3/See 1)(Density)	-	0	CHARGES HAS ALREADY TAKEN IN CLAUSE NO. 6.3.2.
7.1 IS 12235 (Part 1) Table 2(Dimension of Pipes: Mean outside Diameter)	-	0	CHARGES HAS ALREADY TAKEN IN CLAUSE NO. 7.1 7.1 IS 12235 (Part 1) Table 2
7.1,7.1.1 IS 12235 (Part 1)Table 2(Outside Diameter at any point (Minimum))	-	0	CHARGES HAS ALREADY TAKEN IN CLAUSE NO. 7.1.7.1.1 IS 12235.
7.1.2 IS 12235 (Part 1)Table 2(Wall Thickness (Minimum))	-	0	CHARGES HAS ALREADY TAKEN IN CLAUSE NO. 7.1.2 IS 12235 (Part 1).
7.1.3 (Effective length)	-	0	CHARGES ALREADY HAS TAKEN IN 7.1 IS 12235 (Part 1) Table 2 (Dimension of Pipes)
8.0(Pipe Ends)	-	0	CHARGES HAS ALREADY TAKEN IN CLAUSE NO. - 8.0
9.0(PHYSICAL AND 1CHARACTERISTICS)	-	0	-
9.1(Visual Appearance)	-	0	CHARGES ALREADY HAS TAKEN IN CLAUSE NO. 8
9.2 IS 12235 (Part 3)(Opacity)	-	0	CHARGES HAS ALREADY TAKEN IN CLAUSE NO. 9.2
Cl. 9.3,IS 4985 Cl. 10.3(Lead (first extraction))	-	0	CHARGES HAS ALREADY TAKEN.
Cl. 9.3,IS 4985 Cl. 10.3(Lead (third extraction))	-	0	CHARGES HAS ALREADY TAKEN.
Cl. 9.3,IS 4985 Cl. 10.3(Dialkyl tin C4 and higher homologues measured as tin (third extraction))	-	0	CHARGES HAS ALREADY TAKEN.
Cl. 9.3,IS 4985 Cl. 10.3(Cadmium (for all three extracts) )	-	0	CHARGES HAS ALREADY TAKEN.
Cl. 9.3,IS 4985 Cl. 10.3(Mercury (for all three extracts) )	-	0	CHARGES HAS ALREADY TAKEN.
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances such as 'di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate' (third extraction) )	-	0	CHARGES HAS ALREADY TAKEN.
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances including di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate')	-	0	CHARGES HAS ALREADY TAKEN.
9.4 IS 12235(Part 5/Sec 1 and Sec 2)(Reversion Test : When tested by the method prescribed in IS 12235(Part 5/Sec 1 and Sec 2), a length of pipe 200 + 20 mm long shall not alter in length by more than 5 percent.)	-	0	CHARGES HAS ALREADY TAKEN.
9.5 IS 12235(Part 2)(Vicat Softening Temperature: When tested by the method prescribed in IS 12235(Part 2), the Vicat softening temperature of the specimen shall not be less than 110°C.)	-	0	CHARGES HAS ALREADY TAKEN.
9.6 IS 12235(Part 14)(Density)	-	0	CHARGES HAS ALREADY TAKEN.
10.0(Mechanical Properties)	-	0	CHARGES HAS ALREADY TAKEN.
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	0	CHARGES HAS ALREADY TAKEN.
10.2 Table 3 IS 12235 (Part 8/Sec 1)(Thermal Stability by Hydrostatic Pressure Testing)	-	0	CHARGES HAS ALREADY TAKEN.
10.3 IS 4985 Table 4(Resistance to External Blow at O°C: When tested by the method prescribed in IS 4985, with classified striker mass and drop height as given in Table 4, the pipe shall have a true impact rate of not more than 10 percent.)	-	0	CHARGES HAS ALREADY TAKEN.
10.4 IS 12235(Part 19)(Flattening Test)	-	0	CHARGES HAS ALREADY TAKEN.
10.5 IS 12235(Part 13)(Tensile Strength : When tested by the method prescribed in IS 12235(Part 13), the tensile strength at yield shall not be less than 50 MPaat 27±2°C. )	-	0	CHARGES HAS ALREADY TAKEN.
15.4 (b)(Cold impact)	-	0	CHARGES HAS ALREADY TAKEN.

31 Dec, 2026

-
-

9264

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING AND TECHNOLOGY (CIPET):CSTS-BHOPAL

8100534

IS 16098 Part 1 (2013)

Structured-Wall Plastics Piping Systems for Non-Pressure Drainage and Sewerage Part 1 Pipes and Fittings With Smooth External Surface, Type A

61950 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.3.1(Dimension of Pipes and Fittings Diameter of pipe)	-	500	-
6.3.2(Dimension of Pipes and Fittings Lengths of Pipe)	-	0	-
6.3.3(Dimension of Pipes and Fittings Diameters of Pipes and Spigots of Pipes orFittings)	-	0	-
7.0(Physical characteristics for pipes and fittings Appearance)	-	0	-
8.1.2 (a)(Mechanical Characteristics of Pipes Ring Flexibility)	-	1100	-
8.1.2 (b)(Mechanical Characteristics of Pipes Ring Flexibility)	-	0	-
8.1.2 (c)(Mechanical Characteristics of Pipes Ring Flexibility)	-	0	-
8.1.2 (d)(Mechanical Characteristics of Pipes Ring Flexibility)	-	0	-
8.1.2 (e)(Mechanical Characteristics of Pipes Ring Flexibility)	-	0	-
8.2.1(Mechanical Characteristics of Fittings General)	-	1100	-
8.2.2(Mechanical Characteristics of Fittings)	-	0	-
8.3(Joints)	-	2300	-
9 (Table 12)(Performance Requirements)	-	1150	-
11.1(Marking General)	-	0	-
11.2.1(Minimum Required Marking Pipes)	-	0	-
11.2.2(Minimum Required Marking Fittings)	-	0	-
5.1(Composition of the material)	-	0	-
6.1(Wall Construction Designated as Type A)	-	300	-
6.2(Deswignation)	-	0	-
6.3(Dimensions of pipes and fittings)	-	0	-
6.3.1 Table 2(Mean outside diameter)	-	0	-
6.3.2 Table 3(Wall thickness)	-	0	-
6.3.3 Fig 2(Length of pipe)	-	0	-
6.3.4,Table 4,5(Dimensions of Integral sckets and spigot ends)	-	0	-
6.3.4.1(Wall thickness of sockets)	-	0	-
6.3.4.2(Fabricated fittings)	-	0	-
6.3.4.3(Rotational moulded fittings)	-	0	-
6.3.4.4(Type of fittings)	-	0	-
7.1(Appearance)	-	300	-
7.2(Colour )	-	0	-
7.3(Vicat softening temperature of pipes)	-	1100	-
7.4(Resistance to Dichloromethane)	-	1000	-
7.5(longitudinal reversion)	-	950	-
8.1(Appearance and colour)	-	300	-
8.2(Vicat softening temperature of fittings)	-	1400	-
8.3(Effect of Heating (Stress Relief Test))	-	950	-
9.1(Ring stiffness)	-	1400	-
9.2(Resistance to external blows at o C)	-	1400	-
9.3(Ring flexibility)	-	1100	-
9.4(Creep ratio)	-	26300	-
10.1(Impact Strength of Injection Moulded and Fabricated Fittings)	-	1100	-
11.0(Joints)	-	0	-
11.1(Elastomeric Sealing Rings)	-	0	-
11.2(Solvent cement)	-	0	-
12.1(Elastomeric Sealing Ring Joints)	-	1150	-
12.1.1(Tightness of Elastomeric Sealing Ring Joints (Water pressure))	-	0	-
12.1.2(Tightness of Elastomeric Sealing Ring Joints (Internal Vaccum ))	-	2300	-
12.1.3(Resistance to Combined Temperature Cycling and External Loading)	-	0	-
12.2(Solvent cement joints)	-	1150	-
12.2.1(Tightness of Solvent cemented Ring Joints )	-	0	-
12.2.2(Tightness of Solvent cemented Ring Joints (Vaccum pressure))	-	2300	-
5.2 Table 1(Composition of the material- Resistance to internal hydrostatic Pipe material (1) 1 000 IS 12235 No seepage, cracking, pressure at 60ºC)	-	11300	-

31 Dec, 2026

-
-

9265

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING AND TECHNOLOGY (CIPET):CSTS-BHOPAL

8100534

IS 16352 (2020)

Geosynthetics – High density polyethylene (HDPE) geomembranes for lining – Specification (first revision)

96560 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7, 7.1 Annex M(COLOUR, SURFACE CHARACTERISTICS AND FREEDOM FROM DEFECTS: )	-	300	-
6(DIMENSIONS AND TOLERANCES The dimensions of HDPE geomembrane when tested by the method given in IS 7016 (Part 1) shall be as agreed to between the buyer and the seller. However, the minimum width of the HDPE geomembrane shall be 5000 mm. A combination of panel width may be used to obtain desired width of geomembrane. Narrow width panels not less than 1000 mm in width may also be used but such pieces shall not exceed 1 piece per roll of finished material of specified width.)	-	250	-
5,3.1, Table1,ix) Type I / II / III / IV / V / VI / VII Annex G(Seam strength : 85 percent of the original actual fabric strength or unbreakable seam)	-	1350	-
5,3.1, Table 2,xi) Type I / II / III / IV / V / VI IS 2530(Carbon black content)	-	925	-
5,3.1, Table 2,xii) Type I / II / III / IV / V / VI IS 2530(Carbon black dispersion)	-	700	-
5,3.1, Table1,xiii) Type I / II / III / IV / V / VI / VII Oven method of IS 7016 (Part 8), ISO 11357-6 and ASTM D 5885(Oven ageing at 85°C, Retention of oxidative induction time (OIT) after 90 days : a) Standard OIT or b) High pressure OIT)	-	54000	Conditioning charges for 90 days at the rate 25/hr by hot air oven
5,3.1, Table1,i) a) Type I / II / III / IV / V / VI / VII IS 7016 (Part 1)(Length)	-	750	Length, Width & Asperity Heigths
5,3.1, Table1,i) b) Type I / II / III / IV / V / VI / VII IS 7016 (Part 1)(width)	-	0	-
5,3.1, Table1,ii) Type I / II / III / IV / V / VI / VII Method A of IS 13162 (Part 3)(Average thickness at a pressure of 2 ± 0.01 kPa)	-	500	Average Thickness + lowest Individual thickness
5,3.1, Table1,vii) Type I / II / III / IV / V / VI / VII Annex E(Low temperature crack resistance at minus 30°C±1°C)	-	1800	(Test charges 1300 + 500 specimen charges)
5,3.1, Table1,xii) Type I / II / III / IV / V / VI / VII ISO 11357 (Part 6) or ASTM D 5885(Oxidative induction time (OIT) : a) Standard OIT or b) High pressure OIT)	-	2200	OIT after ageing (90 days)
5,3.1, Table1,vi) Type I / II / III / IV / V / VI / VII Annex D(Puncture resistanc)	-	1100	-
5,3.1, Table1,xv) Type I / II / III / IV / V / VI / VII Annex J(Stress crack resistance)	-	12800	(Test charges 300 + Conditioning 12500) for 500 hrs. at the rate 25/hr.
5,3.1, Table1,viii) Type I / II / III / IV / V / VI / VII Annex F(Hydrostatic resistance)	-	1350	(Test charges 1100/- + 250 specimen charges)
5,3.1, Table1,v) Type I / II / III / IV / V / VI / VII Annex C(Tear resistance)	-	1350	(Test charges 1100/- + 250 specimen charges)
5,3.1, Table1,iv) a) Type I / II / III / IV / V / VI / VII Annex B(Tensile properties: Yield strength,)	-	1600	Test charges 1100/- + 500/- specimen charges
5,3.1, Table1,iv) b) Type I / II / III / IV / V / VI / VII Annex B(Tensile properties: Breaking strength,)	-	1100	-
5,3.1, Table1,iv) c) Type I / II / III / IV / V / VI / VII Annex B(Tensile properties: Yield elongation)	-	0	-
5,3.1, Table1,x) Type I / II / III / IV / V / VI / VII IS 2530(Carbon black content)	-	700	-
3, 3.1(MATERIAL AND MANUFACTURE)	-	2000	-
5,3.1, Table1,xiv) Type I / II / III / IV / V / VI / VII Annex H(Retention of breaking strength after UV exposure of 144 h : 85 percent of the original actual fabric strength)	-	9360	Test charges 1100/- + conditioning / exposure charges 8260 /-
5,3.1, Table 1(Requirements of Smooth HDPE Geomembrane)	-	2925	CBC+ Material confirmation (925 +2000)
7, 7.1 Annex M(COLOUR, SURFACE CHARACTERISTICS AND FREEDOM FROM DEFECTS: )	-	0	-
6(DIMENSIONS AND TOLERANCES The dimensions of HDPE geomembrane when tested by the method given in IS 7016 (Part 1) shall be as agreed to between the buyer and the seller. However, the minimum width of the HDPE geomembrane shall be 5000 mm. A combination of panel width may be used to obtain desired width of geomembrane. Narrow width panels not less than 1000 mm in width may also be used but such pieces shall not exceed 1 piece per roll of finished material of specified width.)	-	0	-
5,3.1, Table1,ix) Type I / II / III / IV / V / VI / VII Annex G(Seam strength : 85 percent of the original actual fabric strength or unbreakable seam)	-	0	-
5,3.1, Table1,x) Type I / II / III / IV / V / VI / VII IS 2530(Carbon black content)	-	0	-
5,3.1, Table1,xi) Type I / II / III / IV / V / VI / VII IS 2530(Carbon black dispersion)	-	0	-
5,3.1, Table1,xiii) Type I / II / III / IV / V / VI / VII Oven method of IS 7016 (Part 8), ISO 11357-6 and ASTM D 5885(Oven ageing at 85°C, Retention of oxidative induction time (OIT) after 90 days : a) Standard OIT or b) High pressure OIT)	-	0	-
5,3.1, Table1,i) a) Type I / II / III / IV / V / VI / VII IS 7016 (Part 1)(Length)	-	0	-
5,3.1, Table1,i) b) Type I / II / III / IV / V / VI / VII IS 7016 (Part 1)(width)	-	0	-
5,3.1, Table1,ii) Type I / II / III / IV / V / VI / VII Method A of IS 13162 (Part 3)(Average thickness at a pressure of 2 ± 0.01 kPa)	-	0	-
5,3.1, Table1,vii) Type I / II / III / IV / V / VI / VII Annex E(Low temperature crack resistance at minus 30°C±1°C)	-	0	-
5,3.1, Table1,xii) Type I / II / III / IV / V / VI / VII ISO 11357 (Part 6) or ASTM D 5885(Oxidative induction time (OIT) : a) Standard OIT or b) High pressure OIT)	-	0	-
5,3.1, Table1,vi) Type I / II / III / IV / V / VI / VII Annex D(Puncture resistanc)	-	0	-
5,3.1, Table1,xv) Type I / II / III / IV / V / VI / VII Annex J(Stress crack resistance)	-	0	-
5,3.1, Table1,viii) Type I / II / III / IV / V / VI / VII Annex F(Hydrostatic resistance)	-	0	-
5,3.1, Table1,v) Type I / II / III / IV / V / VI / VII Annex C(Tear resistance)	-	0	-
5,3.1, Table1,iv) a) Type I / II / III / IV / V / VI / VII Annex B(Tensile properties: Yield strength,)	-	0	-
5,3.1, Table1,iv) b) Type I / II / III / IV / V / VI / VII Annex B(Tensile properties: Breaking strength,)	-	0	-
5,3.1, Table1,iv) c) Type I / II / III / IV / V / VI / VII Annex B(Tensile properties: Yield elongation)	-	0	-
5,3.1, Table1,x) Type I / II / III / IV / V / VI / VII IS 2530(Carbon black content)	-	0	-
3, 3.1(MATERIAL AND MANUFACTURE)	-	0	-
5,3.1, Table1,xiv) Type I / II / III / IV / V / VI / VII Annex H(Retention of breaking strength after UV exposure of 144 h : 85 percent of the original actual fabric strength)	-	0	-
5,3.1, Table 1(Requirements of Smooth HDPE Geomembrane)	-	0	-
7, 7.1 Annex M(COLOUR, SURFACE CHARACTERISTICS AND FREEDOM FROM DEFECTS: )	-	0	-
6(DIMENSIONS AND TOLERANCES The dimensions of HDPE geomembrane when tested by the method given in IS 7016 (Part 1) shall be as agreed to between the buyer and the seller. However, the minimum width of the HDPE geomembrane shall be 5000 mm. A combination of panel width may be used to obtain desired width of geomembrane. Narrow width panels not less than 1000 mm in width may also be used but such pieces shall not exceed 1 piece per roll of finished material of specified width.)	-	0	-
5,3.1, Table1,ix) Type I / II / III / IV / V / VI / VII Annex G(Seam strength : 85 percent of the original actual fabric strength or unbreakable seam)	-	0	-
5,3.1, Table1,x) Type I / II / III / IV / V / VI / VII IS 2530(Carbon black content)	-	0	-
5,3.1, Table1,xi) Type I / II / III / IV / V / VI / VII IS 2530(Carbon black dispersion)	-	0	-
5,3.1, Table1,xiii) Type I / II / III / IV / V / VI / VII Oven method of IS 7016 (Part 8), ISO 11357-6 and ASTM D 5885(Oven ageing at 85°C, Retention of oxidative induction time (OIT) after 90 days : a) Standard OIT or b) High pressure OIT)	-	0	-
5,3.1, Table1,i) a) Type I / II / III / IV / V / VI / VII IS 7016 (Part 1)(Length)	-	0	-
5,3.1, Table1,i) b) Type I / II / III / IV / V / VI / VII IS 7016 (Part 1)(width)	-	0	-
5,3.1, Table1,ii) Type I / II / III / IV / V / VI / VII Method A of IS 13162 (Part 3)(Average thickness at a pressure of 2 ± 0.01 kPa)	-	0	-
5,3.1, Table1,vii) Type I / II / III / IV / V / VI / VII Annex E(Low temperature crack resistance at minus 30°C±1°C)	-	0	-
5,3.1, Table1,xii) Type I / II / III / IV / V / VI / VII ISO 11357 (Part 6) or ASTM D 5885(Oxidative induction time (OIT) : a) Standard OIT or b) High pressure OIT)	-	0	-
5,3.1, Table1,vi) Type I / II / III / IV / V / VI / VII Annex D(Puncture resistanc)	-	0	-
5,3.1, Table1,xv) Type I / II / III / IV / V / VI / VII Annex J(Stress crack resistance)	-	0	-
5,3.1, Table1,viii) Type I / II / III / IV / V / VI / VII Annex F(Hydrostatic resistance)	-	0	-
5,3.1, Table1,v) Type I / II / III / IV / V / VI / VII Annex C(Tear resistance)	-	0	-
5,3.1, Table1,iv) a) Type I / II / III / IV / V / VI / VII Annex B(Tensile properties: Yield strength,)	-	0	-
5,3.1, Table1,iv) b) Type I / II / III / IV / V / VI / VII Annex B(Tensile properties: Breaking strength,)	-	0	-
5,3.1, Table1,iv) c) Type I / II / III / IV / V / VI / VII Annex B(Tensile properties: Yield elongation)	-	0	-
5,3.1, Table1,x) Type I / II / III / IV / V / VI / VII IS 2530(Carbon black content)	-	0	-
3, 3.1(MATERIAL AND MANUFACTURE)	-	0	-
5,3.1, Table1,xiv) Type I / II / III / IV / V / VI / VII Annex H(Retention of breaking strength after UV exposure of 144 h : 85 percent of the original actual fabric strength)	-	0	-
5,3.1, Table 1(Requirements of Smooth HDPE Geomembrane)	-	0	-
7, 7.1 Annex M(COLOUR, SURFACE CHARACTERISTICS AND FREEDOM FROM DEFECTS: )	-	-	-
6(DIMENSIONS AND TOLERANCES The dimensions of HDPE geomembrane when tested by the method given in IS 7016 (Part 1) shall be as agreed to between the buyer and the seller. However, the minimum width of the HDPE geomembrane shall be 5000 mm. A combination of panel width may be used to obtain desired width of geomembrane. Narrow width panels not less than 1000 mm in width may also be used but such pieces shall not exceed 1 piece per roll of finished material of specified width.)	-	-	-
5,3.1, Table1,ix) Type I / II / III / IV / V / VI / VII Annex G(Seam strength : 85 percent of the original actual fabric strength or unbreakable seam)	-	-	-
5,3.1, Table1,x) Type I / II / III / IV / V / VI / VII IS 2530(Carbon black content)	-	-	-
5,3.1, Table1,xi) Type I / II / III / IV / V / VI / VII IS 2530(Carbon black dispersion)	-	-	-
5,3.1, Table1,xiii) Type I / II / III / IV / V / VI / VII Oven method of IS 7016 (Part 8), ISO 11357-6 and ASTM D 5885(Oven ageing at 85°C, Retention of oxidative induction time (OIT) after 90 days : a) Standard OIT or b) High pressure OIT)	-	-	-
5,3.1, Table1,i) a) Type I / II / III / IV / V / VI / VII IS 7016 (Part 1)(Length)	-	-	-
5,3.1, Table1,i) b) Type I / II / III / IV / V / VI / VII IS 7016 (Part 1)(width)	-	-	-
5,3.1, Table1,ii) Type I / II / III / IV / V / VI / VII Method A of IS 13162 (Part 3)(Average thickness at a pressure of 2 ± 0.01 kPa)	-	-	-
5,3.1, Table1,vii) Type I / II / III / IV / V / VI / VII Annex E(Low temperature crack resistance at minus 30°C±1°C)	-	-	-
5,3.1, Table1,xii) Type I / II / III / IV / V / VI / VII ISO 11357 (Part 6) or ASTM D 5885(Oxidative induction time (OIT) : a) Standard OIT or b) High pressure OIT)	-	-	-
5,3.1, Table1,vi) Type I / II / III / IV / V / VI / VII Annex D(Puncture resistanc)	-	-	-
5,3.1, Table1,xv) Type I / II / III / IV / V / VI / VII Annex J(Stress crack resistance)	-	-	-
5,3.1, Table1,viii) Type I / II / III / IV / V / VI / VII Annex F(Hydrostatic resistance)	-	-	-
5,3.1, Table1,v) Type I / II / III / IV / V / VI / VII Annex C(Tear resistance)	-	-	-
5,3.1, Table1,iv) a) Type I / II / III / IV / V / VI / VII Annex B(Tensile properties: Yield strength,)	-	-	-
5,3.1, Table1,iv) b) Type I / II / III / IV / V / VI / VII Annex B(Tensile properties: Breaking strength,)	-	-	-
5,3.1, Table1,iv) c) Type I / II / III / IV / V / VI / VII Annex B(Tensile properties: Yield elongation)	-	-	-
5,3.1, Table1,x) Type I / II / III / IV / V / VI / VII IS 2530(Carbon black content)	-	-	-
3, 3.1(MATERIAL AND MANUFACTURE)	-	-	-
5,3.1, Table1,xiv) Type I / II / III / IV / V / VI / VII Annex H(Retention of breaking strength after UV exposure of 144 h : 85 percent of the original actual fabric strength)	-	-	-
5,3.1, Table 1(Requirements of Smooth HDPE Geomembrane)	-	-	-

31 Dec, 2026

-
Revised version of IS 16352:2020. Included w.e.f. 08.08.2023

9266

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING AND TECHNOLOGY (CIPET):CSTS-BHOPAL

8100534

IS 16513 (2016)

Agro textiles “ Insect nets for agriculture and horticulture purposes “ Specification

20572 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6/6.1( REQUIREMENTS Dimensions and Mass a) Length)	-	250	Nil
6/6.1( REQUIREMENTS Dimensions and Mass b) width)	-	250	Nil
6/6.1( REQUIREMENTS Dimensions and Mass c) Mass gm/m2)	-	0	Nil
4.2( Netting Fabric)	-	500	Nil
4/4.1(b) percent on avarage value; and( MATERIAL / HDPE Monofilament Yarn)	-	2000	Nil
4/4.1(a) percent on individual value; and( MATERIAL / HDPE Monofilament Yarn)	-	2000	Nil
4.2( Netting Fabric)	-	0	Nil
4.2( Netting Fabric)	-	0	Nil
5.0(types a) Type I — having mesh of 30; b) Type II — having mesh of 40; andc) c) Type III — having mesh of 50)	-	250	Nil
4/4.1.1/60°C / 95°C( MATERIAL / HDPE Monofilament Yarn)	-	1900	Nil
4.3( Colour)	-	300	Nil
6.2(Table-1)	-	17210	Test charges Rs. 7700/- plus specimen & exposure charge Rs.9510/- (25% discount is not applicable in specimen & exposure charges)

31 Dec, 2026

-
-

9267

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING AND TECHNOLOGY (CIPET):CSTS-BHOPAL

8100534

IS 16647 (2017)

Oriented unplasticized polyvinyl chloride (Pvc - O) pipes for water supply - Specification

26350 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.5( Density, g/cc)	-	500	-
9 /9.1 / 27 degree centigrate(MECHANICAL CHARACTERISTICS OF PIPES9./ Resistance to Hydrostatic Pressure)	-	11850	Resistant To Hydrostatic Pressure Test for 1000 h(Type test) and Hydrostatic Pressure Test for 1 hr (Acceptence test)
9.2, table -11( Resistance to External Blows at 0 °C)	-	1000	-
7.3( Opacity)	-	575	-
8.2 table-9( Pipe Ends)	-	250	-
5.3(VCM Content)	-	3000	-
5.4( K-Value)	-	1100	-
5.6 / 5.6.1( Material Classification, table -1)	-	0	-
6.0(CLASSIFICATION OF PIPES, table-2)	-	0	-
7, see 8.3 and fig-1( GENERAL REQUIREMENTS OF PIPES/ visual appearance)	-	300	-
7.2( Colour)	-	250	-
8.1.1, 8.1.1.2, table-3(Dimension of Pipes / Diameter/8.1.1.2 Diameter at any point)	-	500	-
8.1.2, table 4 to 7(Wall Thickness)	-	0	The test charges has already been taken in the cl. no. 8.1.1, 8.1.1.2, table-3 (Dimension of Pipes.
8.1.3 (Length, meter)	-	0	-
8.2 table-9(Dimensions of Integral Socket)	-	300	-
9.3 table-12( Ring Stiffness)	-	1400	-
9.4, annexure-E( Orientation Factor)	-	900	-
11,11.1( MECHANICAL CHARACTERISTICS OF ASSEMBLIES INCLUDING JOINTS/ 11.1 Assemblies with Non-End-Load-Bearing Joints)	-	1000	-
11.2 / 11.2.1( Short-Term Pressure Test for Leak Tightness of Assemblies)	-	1000	-
11.3( Short-Term Negative Pressure Test for Leak Tightness of Assemblies)	-	1000	cl. no. 11.0 (table 13, 14, 15,16) Test : Long Term Pressure testing for assemble joint at 27 degree centigrade - charges 11,000.00 Test : Long Term Pressure testing for assemble joint at 40 degree centigrade - charges 11,000.00
12(a)( ELASTOMERIC SEALS)	-	1050	-
12(b)( ELASTOMERIC SEALS)	-	375	-

31 Dec, 2026

-
Included w.e.f. 27-05-2022.

9268

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING AND TECHNOLOGY (CIPET):CSTS-BHOPAL

8100534

IS 16703 (2017)

Textiles - High density polyethylene (HDPE) polypropylene (PP) woven sacks for packaging of 25 kg polymer materials - Specification

18580 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2 Table 1(Drop impact strength)	-	1100	-
5.2 Table 1(Breaking strength of bottom seam (Ravelled strip method), Min, N) (kgf) - IS 9030)	-	1350	-
5.2 Table 1(Mass of sack, Gusseted type, g - IS 1964)	-	250	4.3 sacks
(Clauses 4.2, 5.1, 5.2, 5.3 and 5.4) Table 1 (Ash Content ,a) For UV stabilized sacks)	-	950	4.2,5.1,5.2,5.3,5.4 - Ash content
(Clauses 4.2, 5.1, 5.2, 5.3 and 5.4) Table 1 (Ash Content ,b) For non- UV stabilized sacks)	-	0	4.2,5.1,5.2,5.3,5.4 - Ash content
5.2 Table 1(Ends per dm)	-	250	-
5.2 Table 1(Picks per dm)	-	250	-
5.2 Table 1(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70mm1)] Min, N) (kgf): - IS 1969 (Part 1))	-	2200	4.2,5.1,5.2,5.3,5.4 - Breaking strength after UV exposure (Warp/Weft)
5.2 Table 1(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70mm1)] Min, N2) (kgf): - IS 1969 (Part 1))	-	2700	4.2,5.1,5.2,5.3,5.4 - Breaking strength before UV exposure (Warp/Weft)
5.2 Table 1(Elongation at break of fabric (Ravelled strip method), percent : IS 1969 (Part 1))	-	10180	UV resistance (192 Hrs.)
5.2 Table 1(Dimensions)	-	750	4.2 Lindear Density + Width of tape
5.2 Table 1(Dimensions)	-	250	4.2,5.1,5.2,5.3,5.4 Mass of sack

31 Dec, 2026

-
Included w.e.f. 27-05-2022.

9269

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING AND TECHNOLOGY (CIPET):CSTS-BHOPAL

8100534

IS 17216 (2019)

Polyethylene Mulch Films for Agriculture and Horticulture • Specification

617340 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.1(Density)	-	500	-
5.1.2(Melt Flow Index)	-	1100	-
5.1.4(Carbon black, Density)	-	0	-
5.1.4(Carbon black, Toluene extract)	-	0	-
5.1.4(Carbon black, Volatile matter)	-	0	-
5.1.4(Carbon black, particle size)	-	0	-
5.1.4(Carbon black, Tint strength)	-	0	-
5.1.5(UV Stabilizer)	-	2500	-
5.2.1(Visual Appearance)	-	300	-
5.2.2(Film Form)	-	0	-
5.2.4(Odour)	-	250	-
5.3.1.1(Tolerance on thickness)	-	250	-
5.3.1.2(Tolerance on width)	-	250	-
5.3.2(Impact Strength)	-	1350	-
5.3.2, Table 1(Nominal Film Thickness)	-	0	-
5.3.2, Table 1(Impact Failure Mass)	-	0	-
5.3.3(Tensile Strength at Break)	-	2700	-
5.3.4(Elongation at Break)	-	0	The test charges has already been taken in the cl. no. 5.3.3
5.3.5(Coefficient of Friction)	-	850	-
5.3.6(Elmendorf Tear Strength)	-	2000	-
5.3.7(Opacity)	-	575	-
5.4, Table 2(Carbon black, percent)	-	925	-
5.4, Table 2(Ash content, percent)	-	950	-
5.4, Table 2(Carbon black dispersion)	-	700	-
5.5(Service Life)	-	601840	-

31 Dec, 2026

-
Included w.e.f. 27-05-2022.

9270

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING AND TECHNOLOGY (CIPET):CSTS-BHOPAL

8100534

IS 17358 : Part 1 (2020)

Agro textiles “ Fencing nets for agriculture and horticulture purposes “ Specification Part 1 Fencing nets made from extruded polymer mesh

21410.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4, table 1,2,3(MATERIALS)	-	6500.00	6200.00 (Test charge)+ 300.00 (specimen/conditioning charge)
5,/ 5.1( MANUFACTURE (a)Hexagonal shape (see Fig. 1);(b) Diamond shape (see Fig. 2); and c) Square shape (see Fig. 3))	-	0	-
5.2(Colour)	-	250.00	-
6.0(TYPES ,(a)Light duty, b) Medium duty, and c) Heavy duty.)	-	0	-
7.0( REQUIREMENTS)	-	14160.00	5900.00 (Test Charge) + 8260.00 (UV-Exposure of 144 hrs)+ 500.00 (specimen charges of tensile and elongation before UV-exposure)

31 Dec, 2026

-
Included w.e.f. 27-05-2022.

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number