BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15619 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

9301

ABB ELSP LAB, Bengaluru

6184126

IS/IEC 60947 : Part 4 : Sec 1 (2012)

Low - Voltage switchgear and controlgear: Part 4 contactors and motor - Starters: Sec 1 electromechanical contactors and motor - Starters (First Revision)

292136 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.3.3.3.2 (Measurement of the temperature of parts )	-	20000	-
9.3.3.3.3( Temperature rise of a part )	-	20000	-
9.3.3.3.4 (Temperature rise of the main circuit )	-	20000	-
9.3.3.3.5( Temperature rise of control circuit)	-	20000	-
9.3.3.3.6( Temperature rise of coils and electromagnets )	-	20000	-
9.3.3.3.7 (Temperature rise of auxiliary circuits )	-	20000	-
9.3.3.3.8 (Temperature rise of starting resistors for rheostatic rotor starters )	-	20000	-
9.3.3.3.9( Temperature rise of the auto-transformer for two-step auto-transformer starters)	-	20000	-
9.3.3.2(Operating limits)	-	20000	-
9.3.3.2.1(Power-operated equipment)	-	20000	-
9.3.3.2.1.2(Coil power consumption)	-	20000	-
9.3.3.4 (Dielectric properties )	-	11068	-
9.3.5(Overload current withstand capability of contactors)	-	20000	-
9.1.2, (i) (8.2.4 of IEC 60947-1:2007)(Mechanical properties of terminals)	-	20000	-
9.1.2 (j) (Annex C of IEC 60947-1)(verification of degrees of protection of enclosed contactors and starters)	-	11068	-
9.3.3.5("verification of rated making and breaking capacities, change-over ability and reversibility, where applicable")	-	25000	-
9.3.3.6(verification of conventional operational performance)	-	25000	-

05 Mar, 2028

-
Restricted only for Sequence III.

9302

Ace Test Labs & Metrology Pvt. Ltd., Sonipat

9162826

IS 16270 (2023)

Secondary cells and batteries for solar photovoltaic application - General requirements and methods of test

750000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(Photovoltaic Energy System)	-	25000	-
Cl-4.2(Secondary Cells and Batteries)	-	25000	-
Cl-4.3(General Operating Conditions)	-	25000	-
Cl-4.3.8(Storage)	-	50000	-
Cl-4.3.9(Operating Temperature)	-	50000	-
Cl-5.1(Mechanical Endurance)	-	50000	-
Cl-5.2(Charge Efficiency)	-	25000	-
Cl-5.3(Deep Discharge Protection)	-	25000	-
Cl-5.4(Marking)	-	25000	-
Cl-5.5(Safety)	-	25000	-
Cl-5.6(Documentation)	-	25000	-
Cl-6(Functional characteristice)	-	25000	-
Cl-7(General test conditions)	-	25000	-
Cl-8.1(Capacity Test)	-	90000	-
Cl-8.2(Endurance Test)	-	500000	-
Cl-8.3(Charge Retention Test)	-	250000	-
Cl-8.4(Cycle Endurance in Photovoltaic Application (Extreme Conditions))	-	400000	-
Cl-8.5(Sulphation Test (Applicable for Lead Acid Batteries only))	-	60000	-
Cl-8.6(Water Loss Test (Valid for Flooded Lead Acid Batteries only))	-	150000	-
Cl-9.1(Type Tests)	-	750000	-
Cl-9.2(Acceptance Test)	-	100000	-
4.3.7.1(Specific gravity)	-	50000	-

14 Nov, 2027

-
Included w.e.f 04.03.2025

9303

ABB ELSP LAB, Bengaluru

6184126

IS/IEC 60947 : Part 5 : Sec 1 (2009)

Low - Voltage switchgear and controlgear: Part 5 control circuit devices and switching elements: Sec 1 electromechanical control circuit devices (First Revision)

133204 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.3.3.5.2( Making and breaking capacities of switching elements under normal conditions)	-	20000	only AC-15 & DC-13 available
8.3.3.5.5 b)( Dielectric verification)	-	11068	-
8.3.3.2(Operating limits of contactor relays )	-	20000	-
8.3.3.3(Temperature rise )	-	20000	-
8.3.3.4(Dielectric properties)	-	11068	-
8.2.4 of IS/IEC 60947-1(Mechanical properties of Terminal)	-	20000	-
8.3.3.5.3(– Making and breaking capacities of switching elements under abnormal conditions )	-	20000	-
8.3.3.5.5 b)(Dielectric verification)	-	11068	-

05 Mar, 2028

-
Restricted only for Sequence IV, V & VI.

9304

BIS, Patna Branch Laboratory (PBL)

None

IS 2344 (2022)

Flake type chewing tobacco zarda - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Description-2344)	-
4.1 (Silver foil-IS 3110)	-
4.2.2 (Additives (a)Benzoic Acid -IS 12014)	-
4.2.2 (Additives (b)Sorbic Acid-IS 12014)	-
4.3, 8.1 and A-4 Table 1 (i) (Oven Moisture- IS 5643)	-
4.3, 8.1 and A-4 Table 1 (ii) (Total Alkaloids as Nicotine(ODB)-IS 5643/IS 16132/16832)	-
4.3, 8.1 and A-4 Table 1 (iii) (Total ash(ODB)-IS 5643)	-
4.3, 8.1 and A-4 Table 1 (iv) (Silicated residue insoluble in hydrochloric Acid(ODB)-IS 16236)	-

-
All test facilities are available except raw material (Cl 4.1 and Cl 4.2)

9305

Anacon Laboratories Pvt. Ltd, Nagpur

7124116

IS 13428 (2024)

PACKAGED NATURAL MINERAL WATER - SPECIFICATION Third Revision

13800.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl- 6.3, Annex N (i)(P,P -DDE)	-	1250.00	total cost for oganochlorine pesticide
Cl- 6.3, Annex N (i)(O,P -DDE)	-	1250.00	total cost for oganochlorine pesticide
Cl- 6.3, Annex N (i)(P,P- DDT)	-	1250.00	total cost for oganochlorine pesticide
Cl- 6.3, Annex N (i)(O,P -DDT)	-	1250.00	total cost for oganochlorine pesticide
Cl-6.3, Annex N (i)(P,P- DDD)	-	1250.00	total cost for oganochlorine pesticide
Cl-6.3, Annex N (i)(O,P-DDD)	-	1250.00	total cost for oganochlorine pesticide
Cl- 6.3, Annex N (ii)(γ-HCH (lindane))	-	1250.00	total cost for oganochlorine pesticide
Cl- 6.3, Annex N (iii)(α-HCH)	-	1250.00	total cost for oganochlorine pesticide
Cl- 6.3, Annex N (iii)(β-HCH)	-	1250.00	total cost for oganochlorine pesticide
Cl- 6.3, Annex N (iii)(δ - HCH)	-	1250.00	total cost for oganochlorine pesticide
Cl- 6.3, Annex N (iv)(Endosulfan - α)	-	1250.00	total cost for oganochlorine pesticide
Cl- 6.3, Annex N (iv)(Endosulfan - β)	-	1250.00	total cost for oganochlorine pesticide
Cl- 6.3, Annex N (iv)(Endosulfan - sulphate)	-	1250.00	total cost for oganochlorine pesticide
Cl- 6.3, Annex N (v)(Monocrotophos)	-	1250.00	total cost for ogano-phosphorus pesticide
Cl- 6.3, Annex N (vi)(Ethion)	-	1250.00	total cost for ogano-phosphorus pesticide
Cl- 6.3, Annex N (vii)(Chlorpyrifos)	-	1250.00	total cost for ogano-phosphorus pesticide
Cl- 6.3, Annex N (viii)(Phorate and its oxygen analogue)	-	1250.00	total cost for ogano-phosphorus pesticide
Cl- 6.3, Annex N (viii)(phorate sulphoxide)	-	1250.00	total cost for ogano-phosphorus pesticide
Cl- 6.3, Annex N (viii)(phorate sulphone)	-	1250.00	total cost for ogano-phosphorus pesticide
Cl- 6.3, Annex N (ix)(2,4-D)	-	1250.00	total cost for ogano-phosphorus pesticide
Cl- 6.3, Annex N (x)(Butachlor)	-	1250.00	total cost for ogano-phosphorus pesticide
Cl- 6.3, Annex N (xi)(Isoproturon)	-	1250.00	total cost for ogano-phosphorus pesticide
Cl- 6.3, Annex N (xii)(Alachlor)	-	1250.00	total cost for ogano-phosphorus pesticide
Cl- 6.3, Annex N (xiii)(Atrazine)	-	1250.00	total cost for ogano-phosphorus pesticide
Cl- 6.3, Annex N (xiv)(Methyl parathion)	-	1250.00	total cost for ogano-phosphorus pesticide
Cl- 6.3, Annex N (xiv)(Methyl paraoxon)	-	1250.00	total cost for ogano-phosphorus pesticide
Cl- 6.3, Annex N (xv)(Malathion)	-	1250.00	total cost for ogano-phosphorus pesticide
Cl- 6.3, Annex N (xv)(malaoxon)	-	1250.00	total cost for ogano-phosphorus pesticide
Cl- 6.3, Annex N (xvi)(Aldrin)	-	1250.00	total cost for ogano-phosphorus pesticide
6.2/Table 2/xviii(Mineral Oil)	-	1300.00	-
Cl-6.3, Annex N (XVI)(Dieldrin)	-	1250.00	total cost for ogano-phosphorus pesticide
6.2/Table 3/ix(Polynuclear aromatic hydrocarbons)	-	1500.00	-
6.2/Table 3/viii(Polychlorinated biphenyle (PCB))	-	1500.00	-
6.1.1(Escherichia coli)	-	250.00	-
6.1.2(Coliform)	-	275.00	-
6.1.3(Faecal Streptococci)	-	275.00	-
Cl-6.1.3(Staphylococcus aureus)	-	275.00	-
6.1.4(Sulphite Reducing Anaerobe)	-	275.00	-
6.1.5(Pseudomonas aeruginosa)	-	275.00	-
6.1.6(Yeast and moould)	-	275.00	-
6.1.7(Salmonella)	-	275.00	-
Cl-6.1.7(Shigella)	-	275.00	-
6.1.8(Vibrio Cholera)	-	275.00	-
Cl-6.1.8(V. parahaemolyticus)	-	275.00	-
6.2/Table 2/v(Copper)	-	60.00	-
6.2/Table 2/vii(Barium)	-	60.00	-
6.2/Table 2/viii(Antimony)	-	60.00	-
6.2/Table 2/ix(Borate)	-	60.00	-
6.2/Table 2/x(Silver)	-	60.00	-
6.2/Table 2/xvii(Selenium)	-	60.00	-
6.2/Table 3/i(Arsenic)	-	60.00	-
6.2/Table 3/ii(Cadmium)	-	60.00	-
6.2/Table 3/iv(Chromium)	-	60.00	-
6.2/Table 3/v(Mercury)	-	60.00	-
6.2/Table 3/vi(Lead)	-	60.00	-
6.2/Table 3/vii(Nickel)	-	60.00	-
6.2/Table 3/x(Uranium)	-	1800.00	-
6.2/Table 1/i(Colour)	-	60.00	-
6.2/Table 1/ii(Odour)	-	60.00	-
6.2/Table 1/iii(Taste)	-	60.00	-
6.2/Table 1/iv(Turbidity)	-	60.00	-
6.2/Table 1/v(Total Dissoved)	-	60.00	-
6.2/Table 1/vi(pH Value)	-	60.00	-
6.2/Table 2/i(Nitrate)	-	60.00	-
6.2/Table 2/ii(Nitrite)	-	60.00	-
6.2/Table 2/iii(Sulphide)	-	60.00	-
6.2/Table 2/vi(Fluoride)	-	60.00	-
6.2/Table 2/xi(Chloride)	-	60.00	-
6.2/Table 2/xii(Sulphate)	-	60.00	-
6.2/Table 2/xiii(Magnesium)	-	60.00	-
6.2/Table 2/xiv(Calcium)	-	60.00	-
6.2/Table 2/xv(Sodium)	-	60.00	-
6.2/Table 2/xvi(Alkalinity)	-	60.00	-
6.2/Table 2/xix(Phenolic Compounds)	-	200.00	-
6.2/Table 2/xx(Anionic Surface active agents)	-	140.00	-
6.2/Table 3/iii(Cyanide)	-	60.00	-
6.2/Table 2/iv(Manganese)	-	60.00	-
Cl- 6.3, Annex N (i)(P,P -DDE)	-	1250.00	Total cost of Organochlorine pesticide
Cl- 6.3, Annex N (i)(O,P -DDE)	-	1250.00	Total cost of Organochlorine pesticide
Cl- 6.3, Annex N (i)(P,P- DDT)	-	1250.00	Total cost of Organochlorine pesticide
Cl- 6.3, Annex N (i)(O,P -DDT)	-	1250.00	Total cost of Organochlorine pesticide
Cl-6.3, Annex N (i)(P,P- DDD)	-	1250.00	Total cost of Organochlorine pesticide
Cl-6.3, Annex N (i)(O,P-DDD)	-	1250.00	Total cost of Organochlorine pesticide
Cl- 6.3, Annex N (ii)(γ-HCH (lindane))	-	1250.00	Total cost of Organochlorine pesticide
Cl- 6.3, Annex N (iii)(α-HCH)	-	1250.00	Total cost of Organochlorine pesticide
Cl- 6.3, Annex N (iii)(β-HCH)	-	1250.00	Total cost of Organochlorine pesticide
Cl- 6.3, Annex N (iii)(δ - HCH)	-	1250.00	Total cost of Organochlorine pesticide
Cl- 6.3, Annex N (iv)(Endosulfan - α)	-	1250.00	Total cost of Organochlorine pesticide
Cl- 6.3, Annex N (iv)(Endosulfan - β)	-	1250.00	Total cost of Organochlorine pesticide
Cl- 6.3, Annex N (iv)(Endosulfan - sulphate)	-	1250.00	Total cost of Organochlorine pesticide
Cl- 6.3, Annex N (v)(Monocrotophos)	-	1250.00	Total cost of Organophos pesticide
Cl- 6.3, Annex N (vi)(Ethion)	-	1250.00	Total cost of Organophos pesticide
Cl- 6.3, Annex N (vii)(Chlorpyrifos)	-	1250.00	Total cost of Organophos pesticide
Cl- 6.3, Annex N (viii)(Phorate and its oxygen analogue)	-	1250.00	Total cost of Organophos pesticide
Cl- 6.3, Annex N (viii)(phorate sulphoxide)	-	1250.00	Total cost of Organophos pesticide
Cl- 6.3, Annex N (viii)(phorate sulphone)	-	1250.00	Total cost of Organophos pesticide
Cl- 6.3, Annex N (ix)(2,4-D)	-	1250.00	Total cost of Organophos pesticide
Cl- 6.3, Annex N (x)(Butachlor)	-	1250.00	Total cost of Organophos pesticide
Cl- 6.3, Annex N (xi)(Isoproturon)	-	1250.00	Total cost of Organophos pesticide
Cl- 6.3, Annex N (xii)(Alachlor)	-	1250.00	Total cost of Organophos pesticide
Cl- 6.3, Annex N (xiii)(Atrazine)	-	1250.00	Total cost of Organophos pesticide
Cl- 6.3, Annex N (xiv)(Methyl parathion)	-	1250.00	Total cost of Organophos pesticide
Cl- 6.3, Annex N (xiv)(Methyl paraoxon)	-	1250.00	Total cost of Organophos pesticide
Cl- 6.3, Annex N (xv)(Malathion)	-	1250.00	Total cost of Organophos pesticide
Cl- 6.3, Annex N (xv)(malaoxon)	-	1250.00	Total cost of Organophos pesticide
Cl- 6.3, Annex N (xvi)(Aldrin)	-	1250.00	Total cost of Organophos pesticide
6.2/Table 2/xviii(Mineral Oil)	-	1300.00	-
Cl-6.3, Annex N (XVI)(Dieldrin)	-	1250.00	Total cost of Organophos pesticide
6.2/Table 3/ix(Polynuclear aromatic hydrocarbons)	-	1500.00	-
6.2/Table 3/viii(Polychlorinated biphenyle (PCB))	-	1500.00	-
6.1.1(Escherichia coli)	-	250.00	-
6.1.2(Coliform)	-	275.00	-
6.1.3(Faecal Streptococci)	-	275.00	-
Cl-6.1.3(Staphylococcus aureus)	-	275.00	-
6.1.4(Sulphite Reducing Anaerobe)	-	275.00	-
6.1.5(Pseudomonas aeruginosa)	-	275.00	-
6.1.6(Yeast and moould)	-	275.00	-
6.1.7(Salmonella)	-	275.00	-
Cl-6.1.7(Shigella)	-	275.00	-
6.1.8(Vibrio Cholera)	-	275.00	-
Cl-6.1.8(V. parahaemolyticus)	-	275.00	-
6.2/Table 2/v(Copper)	-	60.00	-
6.2/Table 2/vii(Barium)	-	60.00	-
6.2/Table 2/viii(Antimony)	-	60.00	-
6.2/Table 2/ix(Borate)	-	60.00	-
6.2/Table 2/x(Silver)	-	60.00	-
6.2/Table 2/xvii(Selenium)	-	60.00	-
6.2/Table 3/i(Arsenic)	-	60.00	-
6.2/Table 3/ii(Cadmium)	-	60.00	-
6.2/Table 3/iv(Chromium)	-	60.00	-
6.2/Table 3/v(Mercury)	-	60.00	-
6.2/Table 3/vi(Lead)	-	60.00	-
6.2/Table 3/vii(Nickel)	-	60.00	-
6.2/Table 3/x(Uranium)	-	60.00	-
6.2/Table 1/i(Colour)	-	60.00	-
6.2/Table 1/ii(Odour)	-	60.00	-
6.2/Table 1/iii(Taste)	-	60.00	-
6.2/Table 1/iv(Turbidity)	-	60.00	-
6.2/Table 1/v(Total Dissoved)	-	60.00	-
6.2/Table 1/vi(pH Value)	-	60.00	-
6.2/Table 2/i(Nitrate)	-	60.00	-
6.2/Table 2/ii(Nitrite)	-	60.00	-
6.2/Table 2/iii(Sulphide)	-	60.00	-
6.2/Table 2/vi(Fluoride)	-	60.00	-
6.2/Table 2/xi(Chloride)	-	60.00	-
6.2/Table 2/xii(Sulphate)	-	60.00	-
6.2/Table 2/xiii(Magnesium)	-	60.00	-
6.2/Table 2/xiv(Calcium)	-	60.00	-
6.2/Table 2/xv(Sodium)	-	60.00	-
6.2/Table 2/xvi(Alkalinity)	-	60.00	-
6.2/Table 2/xix(Phenolic Compounds)	-	200.00	-
6.2/Table 2/xx(Anionic Surface active agents)	-	140.00	-
6.2/Table 3/iii(Cyanide)	-	60.00	-
6.2/Table 2/iv(Manganese)	-	60.00	-
Cl- 6.3, Annex N (i)(P,P -DDE)	-	1250.00	-
Cl- 6.3, Annex N (i)(O,P -DDE)	-	1250.00	-
Cl- 6.3, Annex N (i)(P,P- DDT)	-	1250.00	-
Cl- 6.3, Annex N (i)(O,P -DDT)	-	1250.00	-
Cl-6.3, Annex N (i)(P,P- DDD)	-	1250.00	-
Cl-6.3, Annex N (i)(O,P-DDD)	-	1250.00	-
Cl- 6.3, Annex N (ii)(γ-HCH (lindane))	-	1250.00	-
Cl- 6.3, Annex N (iii)(α-HCH)	-	1250.00	-
Cl- 6.3, Annex N (iii)(β-HCH)	-	1250.00	-
Cl- 6.3, Annex N (iii)(δ - HCH)	-	1250.00	-
Cl- 6.3, Annex N (iv)(Endosulfan - α)	-	1250.00	-
Cl- 6.3, Annex N (iv)(Endosulfan - β)	-	1250.00	-
Cl- 6.3, Annex N (iv)(Endosulfan - sulphate)	-	1250.00	-
Cl- 6.3, Annex N (v)(Monocrotophos)	-	1250.00	-
Cl- 6.3, Annex N (vi)(Ethion)	-	1250.00	-
Cl- 6.3, Annex N (vii)(Chlorpyrifos)	-	1250.00	-
Cl- 6.3, Annex N (viii)(Phorate and its oxygen analogue)	-	1250.00	-
Cl- 6.3, Annex N (viii)(phorate sulphoxide)	-	1250.00	-
Cl- 6.3, Annex N (viii)(phorate sulphone)	-	1250.00	-
Cl- 6.3, Annex N (ix)(2,4-D)	-	1250.00	-
Cl- 6.3, Annex N (x)(Butachlor)	-	1250.00	-
Cl- 6.3, Annex N (xi)(Isoproturon)	-	1250.00	-
Cl- 6.3, Annex N (xii)(Alachlor)	-	1250.00	-
Cl- 6.3, Annex N (xiii)(Atrazine)	-	1250.00	-
Cl- 6.3, Annex N (xiv)(Methyl parathion)	-	1250.00	-
Cl- 6.3, Annex N (xiv)(Methyl paraoxon)	-	1250.00	-
Cl- 6.3, Annex N (xv)(Malathion)	-	1250.00	-
Cl- 6.3, Annex N (xv)(malaoxon)	-	1250.00	-
Cl- 6.3, Annex N (xvi)(Aldrin)	-	1250.00	-
6.2/Table 2/xviii(Mineral Oil)	-	1300.00	-
Cl-6.3, Annex N (XVI)(Dieldrin)	-	1250.00	-
6.2/Table 3/ix(Polynuclear aromatic hydrocarbons)	-	1500.00	-
6.2/Table 3/viii(Polychlorinated biphenyle (PCB))	-	1500.00	-
6.1.1(Escherichia coli)	-	250.00	-
6.1.2(Coliform)	-	275.00	-
6.1.3(Faecal Streptococci)	-	275.00	-
Cl-6.1.3(Staphylococcus aureus)	-	275.00	-
6.1.4(Sulphite Reducing Anaerobe)	-	275.00	-
6.1.5(Pseudomonas aeruginosa)	-	275.00	-
6.1.6(Yeast and moould)	-	275.00	-
6.1.7(Salmonella)	-	275.00	-
Cl-6.1.7(Shigella)	-	275.00	-
6.1.8(Vibrio Cholera)	-	275.00	-
Cl-6.1.8(V. parahaemolyticus)	-	275.00	-
6.2/Table 2/v(Copper)	-	60.00	-
6.2/Table 2/vii(Barium)	-	60.00	-
6.2/Table 2/viii(Antimony)	-	60.00	-
6.2/Table 2/ix(Borate)	-	60.00	-
6.2/Table 2/x(Silver)	-	60.00	-
6.2/Table 2/xvii(Selenium)	-	60.00	-
6.2/Table 3/i(Arsenic)	-	60.00	-
6.2/Table 3/ii(Cadmium)	-	60.00	-
6.2/Table 3/iv(Chromium)	-	60.00	-
6.2/Table 3/v(Mercury)	-	60.00	-
6.2/Table 3/vi(Lead)	-	60.00	-
6.2/Table 3/vii(Nickel)	-	60.00	-
6.2/Table 3/x(Uranium)	-	60.00	-
6.2/Table 1/i(Colour)	-	60.00	-
6.2/Table 1/ii(Odour)	-	60.00	-
6.2/Table 1/iii(Taste)	-	60.00	-
6.2/Table 1/iv(Turbidity)	-	60.00	-
6.2/Table 1/v(Total Dissoved)	-	60.00	-
6.2/Table 1/vi(pH Value)	-	60.00	-
6.2/Table 2/i(Nitrate)	-	60.00	-
6.2/Table 2/ii(Nitrite)	-	60.00	-
6.2/Table 2/iii(Sulphide)	-	60.00	-
6.2/Table 2/vi(Fluoride)	-	60.00	-
6.2/Table 2/xi(Chloride)	-	60.00	-
6.2/Table 2/xii(Sulphate)	-	60.00	-
6.2/Table 2/xiii(Magnesium)	-	60.00	-
6.2/Table 2/xiv(Calcium)	-	60.00	-
6.2/Table 2/xv(Sodium)	-	60.00	-
6.2/Table 2/xvi(Alkalinity)	-	60.00	-
6.2/Table 2/xix(Phenolic Compounds)	-	200.00	-
6.2/Table 2/xx(Anionic Surface active agents)	-	140.0	-
6.2/Table 3/iii(Cyanide)	-	60.00	-
6.2/Table 2/iv(Manganese)	-	60.00	-
Cl- 6.3, Annex N (i)(P,P -DDE)	-	1250.00	-
Cl- 6.3, Annex N (i)(O,P -DDE)	-	1250.00	-
Cl- 6.3, Annex N (i)(P,P- DDT)	-	1250.00	-
Cl- 6.3, Annex N (i)(O,P -DDT)	-	1250.00	-
Cl-6.3, Annex N (i)(P,P- DDD)	-	1250.00	-
Cl-6.3, Annex N (i)(O,P-DDD)	-	1250.00	-
Cl- 6.3, Annex N (ii)(γ-HCH (lindane))	-	1250.00	-
Cl- 6.3, Annex N (iii)(α-HCH)	-	1250.00	-
Cl- 6.3, Annex N (iii)(β-HCH)	-	1250.00	-
Cl- 6.3, Annex N (iii)(δ - HCH)	-	1250.00	-
Cl- 6.3, Annex N (iv)(Endosulfan - α)	-	1250.00	-
Cl- 6.3, Annex N (iv)(Endosulfan - β)	-	1250.00	-
Cl- 6.3, Annex N (iv)(Endosulfan - sulphate)	-	1250.00	-
Cl- 6.3, Annex N (v)(Monocrotophos)	-	1250.00	-
Cl- 6.3, Annex N (vi)(Ethion)	-	1250.00	-
Cl- 6.3, Annex N (vii)(Chlorpyrifos)	-	1250.00	-
Cl- 6.3, Annex N (viii)(Phorate and its oxygen analogue)	-	1250.00	-
Cl- 6.3, Annex N (viii)(phorate sulphoxide)	-	1250.00	-
Cl- 6.3, Annex N (viii)(phorate sulphone)	-	1250.00	-
Cl- 6.3, Annex N (ix)(2,4-D)	-	1250.00	-
Cl- 6.3, Annex N (x)(Butachlor)	-	1250.00	-
Cl- 6.3, Annex N (xi)(Isoproturon)	-	1250.00	-
Cl- 6.3, Annex N (xii)(Alachlor)	-	1250.00	-
Cl- 6.3, Annex N (xiii)(Atrazine)	-	1250.00	-
Cl- 6.3, Annex N (xiv)(Methyl parathion)	-	1250.00	-
Cl- 6.3, Annex N (xiv)(Methyl paraoxon)	-	1250.00	-
Cl- 6.3, Annex N (xv)(Malathion)	-	1250.00	-
Cl- 6.3, Annex N (xv)(malaoxon)	-	1250.00	-
Cl- 6.3, Annex N (xvi)(Aldrin)	-	1250.00	-
6.2/Table 2/xviii(Mineral Oil)	-	1300.00	-
Cl-6.3, Annex N (XVI)(Dieldrin)	-	1250.00	-
6.2/Table 3/ix(Polynuclear aromatic hydrocarbons)	-	1500.00	-
6.2/Table 3/viii(Polychlorinated biphenyle (PCB))	-	1500.00	-
6.1.1(Escherichia coli)	-	250.00	-
6.1.2(Coliform)	-	275.00	-
6.1.3(Faecal Streptococci)	-	275.00	-
Cl-6.1.3(Staphylococcus aureus)	-	275.00	-
6.1.4(Sulphite Reducing Anaerobe)	-	275.00	-
6.1.5(Pseudomonas aeruginosa)	-	275.00	-
6.1.6(Yeast and moould)	-	275.00	-
6.1.7(Salmonella)	-	275.00	-
Cl-6.1.7(Shigella)	-	275.00	-
6.1.8(Vibrio Cholera)	-	275.00	-
Cl-6.1.8(V. parahaemolyticus)	-	275.00	-
6.2/Table 2/v(Copper)	-	60.00	-
6.2/Table 2/vii(Barium)	-	60.00	-
6.2/Table 2/viii(Antimony)	-	60.00	-
6.2/Table 2/ix(Borate)	-	60.00	-
6.2/Table 2/x(Silver)	-	60.00	-
6.2/Table 2/xvii(Selenium)	-	60.00	-
6.2/Table 3/i(Arsenic)	-	60.00	-
6.2/Table 3/ii(Cadmium)	-	60.00	-
6.2/Table 3/iv(Chromium)	-	60.00	-
6.2/Table 3/v(Mercury)	-	60.00	-
6.2/Table 3/vi(Lead)	-	60.00	-
6.2/Table 3/vii(Nickel)	-	60.00	-
6.2/Table 3/x(Uranium)	-	1800.00	-
6.2/Table 1/i(Colour)	-	60.00	-
6.2/Table 1/ii(Odour)	-	60.00	-
6.2/Table 1/iii(Taste)	-	60.00	-
6.2/Table 1/iv(Turbidity)	-	60.00	-
6.2/Table 1/v(Total Dissoved)	-	60.00	-
6.2/Table 1/vi(pH Value)	-	60.00	-
6.2/Table 2/i(Nitrate)	-	60.00	-
6.2/Table 2/ii(Nitrite)	-	60.00	-
6.2/Table 2/iii(Sulphide)	-	60.00	-
6.2/Table 2/vi(Fluoride)	-	60.00	-
6.2/Table 2/xi(Chloride)	-	60.00	-
6.2/Table 2/xii(Sulphate)	-	60.00	-
6.2/Table 2/xiii(Magnesium)	-	60.00	-
6.2/Table 2/xiv(Calcium)	-	60.00	-
6.2/Table 2/xv(Sodium)	-	60.00	-
6.2/Table 2/xvi(Alkalinity)	-	60.00	-
6.2/Table 2/xix(Phenolic Compounds)	-	200.00	-
6.2/Table 2/xx(Anionic Surface active agents)	-	140.00	-
6.2/Table 3/iii(Cyanide)	-	60.00	-
6.2/Table 2/iv(Manganese)	-	60.00	-

15 Dec, 2029

-
Included w.e.f.12.02.2025 Exclusion Cl 6.2/Table 4/i (Alpha emitters, Bq/l, Max) Cl 6.2/Table 4/ii (Beta emitters, Bq/l, Max)

9306

CIPET: CSTS, Chhatrapati Sambhajinagar

7123534

IS 9873 : Part 1 (2019)

Safety of toys: Part 1 safety aspects related to mechanical and physical properties (Fourth Revision)

23325 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Normal use)	-	500	-
4.2(Reasonably foreseeable abuse)	-	500	-
4.3.1(Material quality)	-	500	-
4.3.2(Expanding materials)	-	1200	500+700
4.4.1(For children under 36 months)	-	500	-
4.4.2(For children 36 months and over but under 72 months)	-	500	-
4.5.1.2(Squeeze toys, rattles, and certain other toys and components of toys)	-	500	-
4.5.1.3(Other toys or components of toys with nearly spherical, hemispherical, circular flared, or dome-shaped ends of toys having a mass less than 0,5 kg and intended for children under 18 months)	-	500	-
4.5.1.4(Toy fasteners (e.g. nails, bolts, screws, and pegs) with nearly spherical, hemispherical, or dome-shaped ends intended for children 18 months and over but under 48 months)	-	500	-
4.5.2(Small balls)	-	500	-
4.5.3(Pompoms)	-	500	-
4.5.4(Pre-school playfigures)	-	500	-
4.5.5(Toy pacifiers)	-	500	-
4.5.6(Balloons)	-	500	-
4.5.7(Marbles)	-	500	-
4.5.8(Hemisphericshaped toys)	-	500	-
4.6.1(Accessible sharp edges of glass or metal)	-	500	-
4.6.2(Functional sharp edges)	-	500	-
4.6.3(Edges on metal toys)	-	500	-
4.6.4(Edges on moulded toys)	-	500	-
4.6.5(Edges on exposed bolts or threaded rods)	-	500	-
4.7.1(Accessible sharp points)	-	500	-
4.7.2(Functional sharp points)	-	500	-
4.7.3(Wooden toys)	-	500	-
4.8(Projections)	-	500	-
4.9(Metal wires and rods)	-	500	-
4.10(Plastic film or plastic bags in packaging and in toys)	-	500	-
4.11.1(General)	-	500	-
4.11.2(Cords in toys intended for children under 18 months)	-	1100	-
4.11.3(Cords in toys intended for children 18 months and over but under 36 months)	-	500	-
4.11.4(Fixed loops and nooses intended for children under 36 months)	-	500	-
4.11.5(Cords on pull toys)	-	500	-
4.11.6(Electrical cables)	-	1100	-
4.11.7(Diameter of certain cords intended for children under 36 months)	-	500	-
4.11.8(Self-retracting cords intended for children under 36 months)	-	500	-
4.11.9(Toys attached to or intended to be strung across, or otherwise attached to, a cradle, cot, perambulator or carriage)	-	500	-
4.11.10(Cords on toy bags)	-	500	-
4.11.11(Cords, strings and lines for flying toys)	-	500	-
4.12.1(Toy pushchairs, perambulators and similar toys)	-	500	-
4.12.2(Other toys with folding mechanisms)	-	500	-
4.12.3(Hinge-line clearance)	-	500	-
4.13.1(Circular holes in rigid materials)	-	500	-
4.13.2(Accessible clearances for movable ,segments)	-	500	-
4.13.3(Chains or belts in ride-on toys)	-	500	-
4.13.4(Other driving mechanisms)	-	500	-
4.13.5(Winding keys)	-	500	-
4.14(Springs)	-	500	-
4.15.1.1(Sideways stability, feet available for stabilization)	-	500	-
4.15.1.2(Sideways stability, feet unavailable for stabilization)	-	500	-
4.15.1.3(Fore and aft stability)	-	500	-
4.15.2(Overload requirements for ride-on toys and seats)	-	500	-
4.15.3(Stability of stationary floor toys)	-	500	-
4.16.1(Ventilation)	-	500	-
4.16.2.1(Lids, doors and similar devices)	-	1500	-
4.16.2.2(Lid support for toy chests and similar toys)	-	1500	-
4.16.3(Toys that enclose the head)	-	1500	-
4.17(Simulated protective equipment, such as helmets, hats and goggles)	-	500	-
4.18.2(Projectiles)	-	500	-
4.18.3(Projectile toys with stored energy)	-	500	-
4.18.4(Projectile toys without stored energy)	-	500	-
4.19(Rotors and propellers)	-	500	-
4.20(Aquatic toys)	-	500	-
4.21(Braking)	-	500	-
4.22.1(Instructions for use)	-	500	-
4.22.2(Determination of maximum saddle height)	-	500	-
4.22.3(Braking requirements)	-	500	-
4.23(Speed limitation of electrically driven ride-on toys)	-	500	-
4.24(Toys containing a heat source)	-	500	-
4.25(Liquid -filled toys)	-	1200	500+700
4.26(Mouth - actuated toys)	-	500	-
4.27(Toy roller skates, toy inline skates and toy skateboards)	-	500	-
4.28(Percussion caps specifically designed for use in toys)	-	500	-
4.29(Acoustic requirements)	-	500	-
4.30.2(Warnings and instructions for use)	-	500	-
4.30.3(Strength)	-	500	-
4.30.4(Stability)	-	500	-
4.30.5(Adjustable and folding steering tubes and handlebars)	-	500	-
4.30.6(Braking)	-	500	-
4.30.7(Wheel size)	-	500	-
4.30.8(Projections)	-	500	-
4.31.1(Magnetic/electrical experimental sets intended for children 8 years and over)	-	500	-
4.31.2(All other toys with magnets and magnetic components)	-	500	-
4.32(Yo-yo balls)	-	500	-
4.33(Straps intended to be worn fully or partially around the neck)	-	500	-
4.34(Sledges and toboggans with cords for pulling)	-	500	-
4.35(Jaw entrapment in handles and steering wheels)	-	500	-

31 Dec, 2029

-
Included w.e.f 17.10.2024 For Part-1 only

9307

TCR ENGINEERING SERVICES PVT.LTD., NAVI MUMBAI

7103506

IS 2501 (1995)

Solid drawn copper tubesfor general engineering purposes - Specification (Third Revision)

12400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. No.5(Grades)	-	3000	10 % Discount to BIS on total invoiced value
Cl. No.6(CONDITION)	-	500	10 % Discount to BIS on total invoiced value
Cl. No. 7(FREEDOM FROM DEFECTS)	-	500	10 % Discount to BIS on total invoiced value
Cl. No. 8.1(Dimensions)	-	500	10 % Discount to BIS on total invoiced value
Cl. No. 8.2(Tolerances)	-	500	10 % Discount to BIS on total invoiced value
Cl. No. 9(CHEMICAL COMPOSITION)	-	3000	10 % Discount to BIS on total invoiced value
Cl. No. 10.1.1, Table no. 1(Tensile Test)	-	1200	10 % Discount to BIS on total invoiced value
Cl. No. 10.2(Flattening and Doubling-Over Test)	-	500	10 % Discount to BIS on total invoiced value
Cl. No. 10.3(Drift Expanding Test)	-	500	10 % Discount to BIS on total invoiced value
Cl. No. 10.4(Non-Destructive Testing)	-	1500	10 % Discount to BIS on total invoiced value
Cl. No. 10.5("Microscopic Examination ( for 0 Condition Only )")	-	1200	10 % Discount to BIS on total invoiced value
Cl. No. 13(Marking)	-	500	10 % Discount to BIS on total invoiced value
10.6(Hydrogen Embrittlement Test)	-	4000	10 % Discount to BIS on total invoiced value
Cl. No.5(Grades)	-	3000	10 % Discount to BIS on total invoiced value
Cl. No.6(CONDITION)	-	500	10 % Discount to BIS on total invoiced value
Cl. No. 7(FREEDOM FROM DEFECTS)	-	500	10 % Discount to BIS on total invoiced value
Cl. No. 8.1(Dimensions)	-	500	10 % Discount to BIS on total invoiced value
Cl. No. 8.2(Tolerances)	-	500	10 % Discount to BIS on total invoiced value
Cl. No. 9(CHEMICAL COMPOSITION)	-	3000	10 % Discount to BIS on total invoiced value
Cl. No. 10.1.1, Table no. 1(Tensile Test)	-	1200	10 % Discount to BIS on total invoiced value
Cl. No. 10.2(Flattening and Doubling-Over Test)	-	500	10 % Discount to BIS on total invoiced value
Cl. No. 10.3(Drift Expanding Test)	-	500	10 % Discount to BIS on total invoiced value
Cl. No. 10.4(Non-Destructive Testing)	-	1500	10 % Discount to BIS on total invoiced value
Cl. No. 10.5("Microscopic Examination ( for 0 Condition Only )")	-	1200	10 % Discount to BIS on total invoiced value
Cl. No. 13(Marking)	-	500	10 % Discount to BIS on total invoiced value
10.6(Hydrogen Embrittlement Test)	-	4000	10 % Discount to BIS on total invoiced value
Cl. No.5(Grades)	-	500	10 % Discount to BIS on total invoiced value
Cl. No.6(CONDITION)	-	500	10 % Discount to BIS on total invoiced value
Cl. No. 7(FREEDOM FROM DEFECTS)	-	500	10 % Discount to BIS on total invoiced value
Cl. No. 8.1(Dimensions)	-	500	10 % Discount to BIS on total invoiced value
Cl. No. 8.2(Tolerances)	-	500	10 % Discount to BIS on total invoiced value
Cl. No. 9(CHEMICAL COMPOSITION)	-	3000	10 % Discount to BIS on total invoiced value
Cl. No. 10.1.1, Table no. 1(Tensile Test)	-	1200	10 % Discount to BIS on total invoiced value
Cl. No. 10.2(Flattening and Doubling-Over Test)	-	500	10 % Discount to BIS on total invoiced value
Cl. No. 10.3(Drift Expanding Test)	-	500	10 % Discount to BIS on total invoiced value
Cl. No. 10.4(Non-Destructive Testing)	-	1500	10 % Discount to BIS on total invoiced value
Cl. No. 10.5("Microscopic Examination ( for 0 Condition Only )")	-	1200	10 % Discount to BIS on total invoiced value
Cl. No. 13(Marking)	-	500	10 % Discount to BIS on total invoiced value
10.6(Hydrogen Embrittlement Test)	-	4000	10 % Discount to BIS on total invoiced value

31 Dec, 2026

-
Included.w.e.f.22.01.2025 Exclusion Cl. No. 10.4 (Non-Destructive Testing) (Optional test)

9308

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 5557 (2004)

Industrial and protective rubber knee and ankle boots - Specification (Fourth Revision)

Industrial and protective rubber knee and ankle boots

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5/5.1.7/5.1.7.8(REQUIREMENTS- Physical Requirements-Resistance to oil)	-	500	-
5/5.1.1-Fig. 1, Fig. 2 and Fig. 3(REQUIREMENTS-Design)	-	200	-
5/5.1.2 -IS 1638(REQUIREMENTS-Size)	-	200	-
5/5.1.3-Table1(REQUIREMENTS-Thickness)	-	200	-
5/5.1.4/5.1.4.1-Table2(REQUIREMENTS-Materials-Rubber components)	-	500	-
5/5.1.4/5.1.4.2(REQUIREMENTS-Materials-Fabric- accordance with IS 1969)	-	600	-
5/5.1.4/5.1.4.3(REQUIREMENTS-Materials-Protective Steel Toe Cap- an per IS 5852)	-	500	-
5/5.1.6/5.1.6.1-Fig. 1, Fig. 2, Fig. 3, .Fig. 4, Fig. 5 and Table 3.(REQUIREMENTS- Construction)	-	1000	-
5/5.1.6/5.1.6.2(REQUIREMENTS- Construction)	-	500	-
5/5.1.7/5.1.7.1(REQUIREMENTS- Physical Requirements-Heat treatment- as per IS 3400 (Part 4))	-	500	-
5/5.1.7/5.1.7.2(REQUIREMENTS- Physical Requirements-Composite strength)	-	500	-
5/5.1.7/5.1.7.3-Table 4(REQUIREMENTS- Physical Requirements-Flexing endurance- as per Annex B.)	-	600	-
5/5.1.7/5.1.7.4(REQUIREMENTS- Physical Requirements- Leakage resistance test)	-	500	-
5/5.1.7/5.1.7.5(REQUIREMENTS- Physical Requirements- Consolidation test- as per IS IS 3400 (Part 5))	-	3000	-
5/5.1.7/5.1.7.6(REQUIREMENTS- Physical Requirements- Performance test- as per Annex C)	-	0	-
5/5.1.7/5.1.7.7(REQUIREMENTS- Physical Requirements-Height of the boots)	-	500	-
5/5.1.7/5.1.7.8(REQUIREMENTS- Physical Requirements-Resistance to oil)	-	0	-
5/5.1.1-Fig. 1, Fig. 2 and Fig. 3(REQUIREMENTS-Design)	-	0	-
5/5.1.2 -IS 1638(REQUIREMENTS-Size)	-	0	-
5/5.1.3-Table1(REQUIREMENTS-Thickness)	-	0	-
5/5.1.4/5.1.4.1-Table2(REQUIREMENTS-Materials-Rubber components)	-	0	-
5/5.1.4/5.1.4.2(REQUIREMENTS-Materials-Fabric- accordance with IS 1969)	-	700	-
5/5.1.4/5.1.4.3(REQUIREMENTS-Materials-Protective Steel Toe Cap- an per IS 5852)	-	0	-
5/5.1.6/5.1.6.1-Fig. 1, Fig. 2, Fig. 3, .Fig. 4, Fig. 5 and Table 3.(REQUIREMENTS- Construction)	-	0	-
5/5.1.6/5.1.6.2(REQUIREMENTS- Construction)	-	0	-
5/5.1.7/5.1.7.1(REQUIREMENTS- Physical Requirements-Heat treatment- as per IS 3400 (Part 4))	-	0	-
5/5.1.7/5.1.7.2(REQUIREMENTS- Physical Requirements-Composite strength)	-	0	-
5/5.1.7/5.1.7.3-Table 4(REQUIREMENTS- Physical Requirements-Flexing endurance- as per Annex B.)	-	0	-
5/5.1.7/5.1.7.4(REQUIREMENTS- Physical Requirements- Leakage resistance test)	-	0	-
5/5.1.7/5.1.7.5(REQUIREMENTS- Physical Requirements- Consolidation test- as per IS IS 3400 (Part 5))	-	0	-
5/5.1.7/5.1.7.6(REQUIREMENTS- Physical Requirements- Performance test- as per Annex C)	-	0	-
5/5.1.7/5.1.7.7(REQUIREMENTS- Physical Requirements-Height of the boots)	-	0	-
5/5.1.7/5.1.7.8(REQUIREMENTS- Physical Requirements-Resistance to oil)	-	0	-
5/5.1.1-Fig. 1, Fig. 2 and Fig. 3(REQUIREMENTS-Design)	-	0	-
5/5.1.2 -IS 1638(REQUIREMENTS-Size)	-	0	-
5/5.1.3-Table1(REQUIREMENTS-Thickness)	-	0	-
5/5.1.4/5.1.4.1-Table2(REQUIREMENTS-Materials-Rubber components)	-	0	-
5/5.1.4/5.1.4.2(REQUIREMENTS-Materials-Fabric- accordance with IS 1969)	-	0	-
5/5.1.4/5.1.4.3(REQUIREMENTS-Materials-Protective Steel Toe Cap- an per IS 5852)	-	0	-
5/5.1.6/5.1.6.1-Fig. 1, Fig. 2, Fig. 3, .Fig. 4, Fig. 5 and Table 3.(REQUIREMENTS- Construction)	-	0	-
5/5.1.6/5.1.6.2(REQUIREMENTS- Construction)	-	0	-
5/5.1.7/5.1.7.1(REQUIREMENTS- Physical Requirements-Heat treatment- as per IS 3400 (Part 4))	-	0	-
5/5.1.7/5.1.7.2(REQUIREMENTS- Physical Requirements-Composite strength)	-	0	-
5/5.1.7/5.1.7.3-Table 4(REQUIREMENTS- Physical Requirements-Flexing endurance- as per Annex B.)	-	0	-
5/5.1.7/5.1.7.4(REQUIREMENTS- Physical Requirements- Leakage resistance test)	-	0	-
5/5.1.7/5.1.7.5(REQUIREMENTS- Physical Requirements- Consolidation test- as per IS IS 3400 (Part 5))	-	0	-
5/5.1.7/5.1.7.6(REQUIREMENTS- Physical Requirements- Performance test- as per Annex C)	-	0	-
5/5.1.7/5.1.7.7(REQUIREMENTS- Physical Requirements-Height of the boots)	-	0	-
5, 5.1(Requirement)	-	0	-
6.1(Marking)	-	200	-
6, 6.1(Packing)	-	0	-
5, 5.1(Requirement)	-	0	-
6.1(Marking)	-	0	-
6.2(Packing)	-	0	-

26 Jul, 2027

-
Included w.e.f 09.04.2025

9309

Maarc Labs Private Limited, Pune

7119116

IS 14543 (2024)

Packaged Drinking Water Other than Packaged Natural Mineral Water Specification Third Revision

17700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.2.1(Escherichia coli or thermotolerant bacteria)	-	307.7	-
Cl-5.2.2(Coliform)	-	307.7	-
Cl-5.2.3(Staphylococcus aureus)	-	307.7	-
Cl-5.2.3(Faecal streptococci)	-	307.7	-
Cl-5.2.4(Sulphite Reducing Anaerobes)	-	307.7	-
Cl-5.2.5(Pseudomonas Aeruginosa)	-	307.7	-
Cl-5.2.6(Aerobic Microbial Count @ 37 deg C)	-	307.7	-
5.2.6(Aerobic Microbial Count @ 20 to 22 deg C)	-	307.7	-
Cl-5.2.7(Yeast and mould)	-	307.7	-
Cl-5.2.8(Salmonella)	-	307.7	-
Cl-5.2.8(shigella)	-	307.7	-
Cl-5.2.9(Vibrio cholera)	-	307.7	-
Cl-5.2.9(V.parahaemolyticus)	-	307.7	-
Cl-5.3, Table-2 (i)(Barium (as Ba))	-	100	-
Cl-5.3, Table-2 (ii)(Copper (as Cu))	-	100	-
Cl-5.3, Table-2 (iii)(Iron (as Fe))	-	100	-
Cl-5.3, Table-2 (iv)(Manganese (as Mn))	-	100	-
Cl-5.3, Table-2 (viii)(Zinc (as Zn))	-	100	-
Cl-5.3, Table-2 (ix)(Silver (as Ag))	-	100	-
Cl-5.3, Table-2 (x)(Aluminium (as A1))	-	100	-
Cl-5.3, Table-2 (xii)(Selenium (as Se))	-	100	-
Cl-5.3, Table-2 (xvii)(Sodium (as Na))	-	100	-
Cl-5.3, Table-2 (xxiii)(Antimony (as Sb))	-	100	-
Cl-5.3, Table-2 (xxiv)(Borates (as B))	-	100	-
Cl-5.3, Table-3 (i)(Mercury (as Hg))	-	200	-
Cl-5.3, Table-3 (ii)(Cadmium (as Cd))	-	200	-
Cl-5.3, Table-3 (iii)(Arsenic (as As))	-	200	-
Cl-5.3, Table-3 (v)(Lead (as Pb))	-	200	-
Cl-5.3, Table-3 (vi)(Chromium (as Cr))	-	200	-
Cl-5.3, Table-3 (vii)(Nickel (as Ni))	-	200	-
Cl-5.3, Table-3 (x)(Uranium)	-	800	-
Cl-5.3, Table-1 (i)(Colour, true colour units, Max)	-	100	-
Cl-5.3, Table-1 (ii)(Odour)	-	100	-
Cl-5.3, Table-1 (iii)(Taste)	-	100	-
Cl-5.3, Table-1 (iv)(Turbidity, nephelometric turbidity unit (NTU), Max)	-	100	-
Cl-5.3, Table-1 (v)(Total dissolved solids, mg/l, Max)	-	100	-
Cl-5.3, Table-1 (vi)(pH)	-	100	-
Cl-5.3, Table-2 (v)(Nitrate (as NO3 ))	-	100	-
Cl-5.3, Table-2 (vi)(Nitrite (as NO2 ))	-	100	-
Cl-5.3, Table-2 (vii)(Fluoride (as F))	-	1000	-
Cl-5.3, Table-2 (xi)(Chloride (as Cl))	-	100	-
Cl-5.3, Table-2 (xiii)(Sulphate (as SO4 ))	-	100	-
Cl-5.3, Table-2 (xiv)(Alkalinity (as HCO3 ))	-	100	-
Cl-5.3, Table-2 (xv)(Calcium (as Ca))	-	100	-
Cl-5.3, Table-2 (xvi)(Magnesium (as Mg))	-	100	-
Cl-5.3, Table-2 (xviii)(Residual free chlorine)	-	500	-
Cl-5.3, Table-2 (xix)(Phenolic compounds (as C6H5OH))	-	100	-
Cl-5.3, Table-2 (xx)(Mineral oil)	-	500	-
Cl-5.3, Table-2 (xxi)(Anionic surface active agents)	-	100	-
Cl-5.3, Table-2 (xxii)(Sulphide)	-	100	-
Cl-5.3, Table-2 (xxv)(Bromates (as BrO3 ))	-	1000	-
Cl-5.3, Table-3 (iv)(Cyanide (as CN))	-	200	-
5.4/Annex D/i(P,P-DDT)	-	129	-
5.4/Annex D/i(O,P-DDT)	-	129	-
5.4/Annex D/i(O,P-DDD)	-	129	-
5.4/Annex D/i(P,P-DDE)	-	129	-
5.4/Annex D/i(O,P-DDE)	-	129	-
5.4/Annex D/i(P,P-DDD)	-	129	-
5.4/Annex D/ii(Lindane)	-	129	-
5.4/Annex D/iii(d-HCH)	-	129	-
5.4/Annex D/iii(a-HCH)	-	129	-
5.4/Annex D/iii(β- HCH)	-	129	-
5.4/Annex D/iv(b-Endosulfan)	-	129	-
5.4/Annex D/iv(Endosulfan sulfate)	-	129	-
5.4/Annex D/iv(a-Endosulfan)	-	129	-
5.4/Annex D/v(Monochrotophos)	-	129	-
5.4/Annex D/vi(Ethion)	-	129	-
5.4/Annex D/vii(Chlorpyrifos)	-	129	-
5.4/Annex D/viii(Phorate)	-	129	-
5.4/Annex D/viii(Phorate sulphoxide)	-	129	-
5.4/Annex D/viii(Phorate sulfone)	-	129	-
5.4/Annex D/ix(2,4 –D)	-	129	-
5.4/Annex D/x(Butachlor)	-	129	-
5.4/Annex D/xi(Isoproturon)	-	129	-
5.4/Annex D/xii(Alachlor)	-	129	-
5.4/Annex D/xiii(Atrazine)	-	129	-
5.4/Annex D/xiv(Methyl parathion)	-	129	-
5.4/Annex D/xxvii(Methyl paraoxon)	-	129	-
5.4/Annex D/xv(Malathion)	-	129	-
5.4/Annex D/xxviii(Malaoxon)	-	129	-
5.4/Annex D/xvi(Dieldrin)	-	129	-
5.4/Annex D/xvi(Aldrin)	-	129	-
Cl-5.3, Table-3 (viii)(Polychlorinated biphenyl (PCB))	-	900	-
Cl-5.3, Table-3 (ix)(Polynuclear aromatic hydrocarbons)	-	900	-
Cl-5.4 (ii)(Total pesticide residue)	-	130	-
Cl-5.4 (i)(Pesticide residues considered individually)	-	129	-
5.4 i)(Dieldrin)	-	129	-
5.4 i)(Aldrin)	-	129	-
5.4 i)(Malathion)	-	129	-
5.4, i)("oxygen analogue of Malathion (Malaoxon)")	-	129	-
5.4 i)(Methyl Paraoxon)	-	129	-
5.4 i)(Methyl Parathion)	-	129	-
5.4 i)(Atrazine)	-	129	-
5.4 i)(Alachlor)	-	129	-
5.4 i)(Isoproturon)	-	129	-
5.4 i)(Butachlor)	-	129	-
5.4 i)(2,4-D)	-	129	-
5.4 i)(Phorate sulphone)	-	129	-
5.4 i)(Phorate sulphoxide)	-	129	-
5.4 i)(Phorate)	-	129	-
5.4 i)(Chlorpyrifos)	-	129	-
5.4 i)(Ethion)	-	129	-
5.4 i)(Monocrotophos)	-	129	-
5.4 i)(Endosulfan Sulphate)	-	129	-
5.4 i)(beta-Endosulfan)	-	129	-
5.4 i)(alpha-Endosulfan)	-	129	-
5.4 i)(Delta-HCH)	-	129	-
5.4 i)(beta-HCH)	-	129	-
5.4 i)(alpha-HCH)	-	129	-
5.4 i)(Gamma-HCH (Lindane))	-	129	-
5.4 i)(p,p DDD)	-	129	-
5.4 i)(o,p DDD)	-	129	-
5.4 i)(p,p DDE)	-	129	-
5.4, i)(o,p DDE)	-	129	-
5.4 i)(p,p DDT)	-	129	-
5.4 i)(o,p DDT)	-	129	-
Table 3, x)(Uranium)	-	800	-
5.3(Appearance)	-	100	-
Cl-5.1(General Requirements)	-	100	-

31 Dec, 2026

-
Included w.e.f.18.11.2024 Exclusion Cl-5.3, Table-4 (i) (Alpha emitters, Becquerel (Bq/l)) Cl-5.3, Table-4 (ii) (Beta emitters, Becquerel (Bq/l),)

9310

URS PRODUCTS AND TESTING PVT. LTD. (A29), NOIDA

8168906

IS 2619 (2018)

Glass beakers - Specification (Third Revision)

13000 View breakup
-

Clause No.	Exclusion	Remark
Cl.5 Capacity (a)overflow of capacity of a beaker shall exceed the nominal capacity by at least 5 %;)	-	-
Cl.5 Capacity (b) Distance between the levels corresponding to the nominal and overflow capacities shall be at least 10 mm.)	-	-
Cl.6 Material(Beakers shall be made of borosilicate glass 3.3 in accordance with ISO 3585. The glass shall be reasonably free from residual strain and from visible glass defects which might impair the safety and performance of the beaker.)	-	-
Cl.7.1 Dimensions(Low-form and tall-form beakers shall observe the dimensions specified in Table 1 and thick-walled beakers the dimensions specifed in Table 2. The tolerances on the external diameter shall be ±5 % of the value given in the tables.)	-	-
Cl.7.2 Radius at base(Beakers having a nominal capacity of 250 ml or greater shall have an external radius at the junction between the base and the side of 10 % to 20 % of the external diameter.)	-	-
Cl.7.2 Radius at base(Beakers having a nominal capacity less than 250 ml shall have a minimum radius at the junction between the base and the side of 5 % of the external diameter.)	-	-
Cl.7.3 Wall thickness(Substantial local irregularities from the minimum values for wall thickness given in the tables shall be avoided. That means, the minimum wall thickness shall fall at no place below the values given in Table 1 and Table 2 and the beakers shall comply with the requirement for thermal shock endurance specified in 8.5.)	-	-
Cl.8.1 Base(The design of the base shall enable the beaker to stand vertically on a plane horizontal surface without spinning or rocking)	-	-
8.2 Upper edge(The side of the beaker shall be slightly flared near the brim in a smooth and regular curve. The diameter of the brim shall be of the order of 5 % to 15 % greater than the diameter of the body. The edge of the brim shall be finished in a plane parallel with that of the horizontal base.)	-	-
Cl. 8.3 Spout(The spout shall be shaped so that, when the beaker is filled with water, the water may be poured in a regular stream clear of the side of the beaker. When the beaker is placed on a horizontal surface and filling is continued beyond its overflow capacity, the water shall first overflow from the spout and not from any other part of the brim.)	-	-
Cl.8.4 Scale(Beakers may be provided with a scale, which should approximately indicate the volume contained in the beaker.)	-	-
Cl.8.5 Thermal shock resistance(Beakers shall have a thermal shock resistance of 160 °C when tested in accordance with ISO 718.)	-	-
Cl.5 Capacity (a)overflow of capacity of a beaker shall exceed the nominal capacity by at least 5 %;)	-	-
Cl.5 Capacity (b) Distance between the levels corresponding to the nominal and overflow capacities shall be at least 10 mm.)	-	-
Cl.6 Material(Beakers shall be made of borosilicate glass 3.3 in accordance with ISO 3585. The glass shall be reasonably free from residual strain and from visible glass defects which might impair the safety and performance of the beaker.)	-	-
Cl.7.1 Dimensions(Low-form and tall-form beakers shall observe the dimensions specified in Table 1 and thick-walled beakers the dimensions specifed in Table 2. The tolerances on the external diameter shall be ±5 % of the value given in the tables.)	-	-
Cl.7.2 Radius at base(Beakers having a nominal capacity of 250 ml or greater shall have an external radius at the junction between the base and the side of 10 % to 20 % of the external diameter.)	-	-
Cl.7.2 Radius at base(Beakers having a nominal capacity less than 250 ml shall have a minimum radius at the junction between the base and the side of 5 % of the external diameter.)	-	-
Cl.7.3 Wall thickness(Substantial local irregularities from the minimum values for wall thickness given in the tables shall be avoided. That means, the minimum wall thickness shall fall at no place below the values given in Table 1 and Table 2 and the beakers shall comply with the requirement for thermal shock endurance specified in 8.5.)	-	-
Cl.8.1 Base(The design of the base shall enable the beaker to stand vertically on a plane horizontal surface without spinning or rocking)	-	-
8.2 Upper edge(The side of the beaker shall be slightly flared near the brim in a smooth and regular curve. The diameter of the brim shall be of the order of 5 % to 15 % greater than the diameter of the body. The edge of the brim shall be finished in a plane parallel with that of the horizontal base.)	-	-
Cl. 8.3 Spout(The spout shall be shaped so that, when the beaker is filled with water, the water may be poured in a regular stream clear of the side of the beaker. When the beaker is placed on a horizontal surface and filling is continued beyond its overflow capacity, the water shall first overflow from the spout and not from any other part of the brim.)	-	-
Cl.8.4 Scale(Beakers may be provided with a scale, which should approximately indicate the volume contained in the beaker.)	-	-
Cl.8.5 Thermal shock resistance(Beakers shall have a thermal shock resistance of 160 °C when tested in accordance with ISO 718.)	-	-
Cl.5 Capacity (a)overflow of capacity of a beaker shall exceed the nominal capacity by at least 5 %;)	-	-
Cl.6 Material(Beakers shall be made of borosilicate glass 3.3 in accordance with ISO 3585. The glass shall be reasonably free from residual strain and from visible glass defects which might impair the safety and performance of the beaker.)	-	-
Cl.7.1 Dimensions(Low-form and tall-form beakers shall observe the dimensions specified in Table 1 and thick-walled beakers the dimensions specifed in Table 2. The tolerances on the external diameter shall be ±5 % of the value given in the tables.)	-	-
Cl.7.2 Radius at base(Beakers having a nominal capacity of 250 ml or greater shall have an external radius at the junction between the base and the side of 10 % to 20 % of the external diameter.)	-	-
Cl.7.2 Radius at base(Beakers having a nominal capacity less than 250 ml shall have a minimum radius at the junction between the base and the side of 5 % of the external diameter.)	-	-
Cl.7.3 Wall thickness(Substantial local irregularities from the minimum values for wall thickness given in the tables shall be avoided. That means, the minimum wall thickness shall fall at no place below the values given in Table 1 and Table 2 and the beakers shall comply with the requirement for thermal shock endurance specified in 8.5.)	-	-
Cl.8.1 Base(The design of the base shall enable the beaker to stand vertically on a plane horizontal surface without spinning or rocking)	-	-
8.2 Upper edge(The side of the beaker shall be slightly flared near the brim in a smooth and regular curve. The diameter of the brim shall be of the order of 5 % to 15 % greater than the diameter of the body. The edge of the brim shall be finished in a plane parallel with that of the horizontal base.)	-	-
Cl. 8.3 Spout(The spout shall be shaped so that, when the beaker is filled with water, the water may be poured in a regular stream clear of the side of the beaker. When the beaker is placed on a horizontal surface and filling is continued beyond its overflow capacity, the water shall first overflow from the spout and not from any other part of the brim.)	-	-
Cl.8.4 Scale(Beakers may be provided with a scale, which should approximately indicate the volume contained in the beaker.)	-	-
Cl.8.5 Thermal shock resistance(Beakers shall have a thermal shock resistance of 160 °C when tested in accordance with ISO 718.)	-	-
Cl.5 Capacity (b) Distance between the levels corresponding to the nominal and overflow capacities shall be at least 10 mm.)	-	-

26 Sep, 2027

-
Included w.e.f.05.11.2024

9311

BIS, Eastern Regional Laboratory (ERL)

None

IS 15298 : Part 2 (2024)

Personal Protective Equipment Part 2 Safety Footwear (ISO 20345 : 2021, MOD) (Third Revision)

For all class, design and size

20400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 5.3.6, Table no 1 of IS 17011,(i) (Allergenic and carcinogenic disperse dyes)	-
Cl 5.3.6, Table no 1 of IS 17011 (ii) (Aromatic amines released from Azo dyes (each individual amine))	-
Cl 5.3.6, Table no 1 of IS 17011 (iii) (Aromatic amines released from Azo dyes (each individual amine))	-
Cl 5.3.6, Table no 1 of IS 17011 (iv) (Chromium (VI))	-
Cl 5.3.6, Table no 1 of IS 17011 (v) (Dimethyl fumarate (DMFU))	-
Cl 5.3.6, Table no1 of IS 17011 (vi) (Formaldehyde (free or released by partial hydrolysis))	-
Cl 5.3.6, Table no 1 of IS 17011 (vii) (Formaldehyde)	-
Cl 5.3.6, Table no 1 of IS 17011 (x) (pH)	-
Cl 5.3.6, Table no 1 of IS 17011 (xi) (Phthalates (each individual phthalate))	-
Cl 5.3.6, Table no 1 of IS 17011 (xii) (Nickel, on skin contact)	-
Cl 5.2 (Design)	-
Cl 5.2.2, Table 4 (" Height of upper ")	-
Cl 5.2.3 (Heel area)	-
Cl 5.3.1.1 (Construction of whole footwear)	-
Cl 5.3.1.2 (Upper/outsole bond strength)	-
Cl 5.3.2.1 (Toe protection - general)	-
Cl 5.3.2.2 (Internal length)	-
Cl 5.3.2.3 (Width of toecap flange)	-
Cl 5.3.2.4.1 (Corrosion resistance of Class I footwear and hybrid mounted footwear)	-
Cl 5.3.2.4.2 (Corrosion resistance of Class II and hybrid moulded footwear)	-
Cl 5.3.2.5 (Behaviour of toecaps (thermal and chemical) of Corrosion resistance)	-
Cl 5.3.2.6 (Impact resistance)	-
Cl 5.3.2.7 (Compression resistance)	-
Cl 5.3.3 (Leak proofness)	-
Cl 5.3.4 ("Specific ergonomic features ")	-
Cl 5.3.7 (Seam strength)	-
Cl 5.4.1.1 (Class I footwear, determination of the area where upper requirements apply of Upper)	-
Cl 5.4.1.2 (Hybrid footwear, determination of the area where upper requirements apply of Upper)	-
Cl 5.4.2 (Thickness)	-
Cl 5.4.3 (Tear strength)	-
Cl 5.4.4, Table 11 (Tensile properties- Tensile strength)	-
Cl 5.4.4, Table 11 (Tensile properties- Breaking Force)	-
Cl 5.4.4, Table 11 (Tensile properties-Modulus at 100 % elongation)	-
Cl 5.4.4, Table 11 (Tensile properties- Elongation at break)	-
Cl 5.4.5 (Flexing resistance)	-
Cl 5.4.6 (Water vapour permeability and coefficient)	-
Cl 5.4.7 (Resistance to hydrolysis)	-
Cl 5.5.2 (Lining- Tear strength)	-
Cl 5.5.3 (Lining- Abrasion resistance)	-
Cl 5.5.4 (Lining-Water vapour permeability and coefficient)	-
Cl 5.6.2, Table 14 (Tear strength of tongue)	-
Cl 5.7.1 (Thickness of Insole, insock and footbed)	-
Cl 5.7.2 (Water permeability of insock)	-
Cl 5.7.3 (Water absorption and desorption of Insole, insock and footbed)	-
Cl 5.7.4.1 (Abrasion resistance of Insoles)	-
Cl 5.7.4.2 (Abrasion resistance of Insocks)	-
Cl 5.8.2.1, Table 15 (Thickness of Outsole)	-
Cl 5.8.2.2 (Cleated area)	-
Cl 5.8.2.3 (Cleat height)	-
Cl 5.8.3 (Outsole- Tear strength)	-
Cl 5.8.4 (Outsole- Abrasion resistance)	-
Cl 5.8.5 (Outsole-Flexing resistance)	-
Cl 5.8.6 (Outsole-Resistance to hydrolysis)	-
Cl 5.8.7 (Interlayer bond strength)	-
Cl 5.3.6, Table no 1 of IS 17011 (ix) (PCP-TeCP-TriCP polychlorophenols)	-

-
Mech- Except water resistance test (trough test), metatarsal protection. Quantity:- 6 Pairs shoes + 2 Toe caps(if metallic) + 5 Pairs Toe caps (if non -metallic)+ 1 slab of outsole (Size 200x200 mm of thickness 2.0+/-0.2 mm) for tear strength + 1 slab (size 200 x 200 mm of thickness 3.0+/- 0.2 mm) for Hydrolysis + Raw material + For multilayer outsole separate slab of outer layer of outsole to be provided for Abrasion Resistance test. Chem - Complete, Material declaration required for Innocuousness test.

9312

ELMEF TESTING AND CALIBRATION LABORATORIES PRIVATE LIMITED

8138926

IS 1554 : Part 1 (1988)

Specification for pvc insulated (Heavy Duty) electric cables: Part 1 for working voltages up to and including 1100 v (Third Revision)

PVC insulated ( Heavy Duty) Electric Cables

22500 View breakup
For BIS samples: Testing charges shall not exceed 1.5 times BIS Testing charges. For other: a) Single core unsheathe cable =Rs. 5500/- b) Single core sheathed cable = Rs. 6500/- c) Extra charges for FR cable = Rs. 11000/- d) Extra charges for FR LSH cable = Rs 14000/- e) Extra charges for armouring cable =Rs. 4000/- f) Extra charges for mining cable =Rs 1200/- g) separate wire before stranding =Rs 500/- h) Extra charges for each additional core = Rs. 1500/- i) Optional test (if required) = Rs. 800/- (15% discount to BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.2(INSULATION : Thickness of Insulation)	-	75	-
12.3.1(INNER SHEATH :Thickness of Inner Sheath)	-	75	-
13.3(Armouring : Dimensions -Wire Diameter)	-	78	-
13.5.1(ARMOURING : Resistance)	-	81	-
13.6 a)(ARMOURING: Tensile Strength)	-	78	-
13.6 b)(ARMOURING: Elongation )	-	78	-
13.1.2(Armouring: Coverage )	-	75	-
14.4.1(Thickness of Outer Sheath : Unarmowed Cables)	-	78	-
14.4.2(Thickness of Outer Sheath : Armoured Cables)	-	78	-
15.1 a) 1)(Tests on conductor : Annealing test ( for copper ))	-	78	-
15.1 a) 2)(Tensile test (for aluminium) - Before stranding )	-	78	-
15.1 a) 2)(Tensile test (for aluminium) - After stranding )	-	78	-
15.1 a) 3)(Tests on conductor : Wrapping test ( for aluminium ))	-	75	-
15.1 a) 4)(Tests on conductor : Conductor resistance test)	-	81	-
15.1 a) 4)(Resistance test - Neutral conductor )	-	81	-
15.1 d)1)(Phyaical tests for insulation : Tensile Test)	-	81	-
15.1 d)1)(Phyaical tests for insulation : Elongation )	-	81	-
15.1 d)1)(Physical tests for sheath : Tensile stregth )	-	81	-
15.1 d)1)(Physical tests for sheath : Elongation )	-	81	-
15.1 d)2)(Phyaical tests for insulation- Ageing in air Oven : Tensile Test)	-	2670	-
15.1 d)2)(Phyaical tests for insulation - Ageing in air oven : Elongation )	-	2670	-
15.1 d)2)(Physical tests for outer sheath -Ageing in air oven : Elongation )	-	2670	-
15.1 d)3)(Phyaical tests for insulation : Shrinkage )	-	2670	-
15.1 d)3)(Phyaical tests for Sheath : Shrinkage )	-	90	-
15.1 d)4)(Hot deformation : Insulation )	-	90	-
15.1 d)4)(Hot deformation : Sheath )	-	90	-
15.1 d)5)( Loss of mass in air oven- Insulation )	-	2670	-
15.1 d)5)( Loss of mass in air oven- sheath )	-	2670	-
15.1 d)6)(Heat shock test- Insulation )	-	90	-
15.1 d)6)(Heat shock test- sheath )	-	90	-
15.1 d)7)(Thermal stability- insulation )	-	81	-
15.1 d)7)(Thermal stability- Sheath )	-	81	-
15.1 e)(Insulation resistance test : Volume Resistivity )	-	156	-
15.1 e)(Insulation resistance test : IR Constant )	-	156	-
15.1 f)(High voltage test ( water immersion test ))	-	870	-
15.1 g)(High voltage test at room temperature)	-	870	-
15.4 a)(Cold bend test- Insulation ( Optional test))	-	177	-
15.4 a)(Cold bend test- Sheath ( Optional test))	-	177	-
15.4 b)(Cold impact test- Insulation ( Optional test))	-	177	-
15.4 b)(Cold impact test- Sheath ( Optional test))	-	177	-
16.4(Flammability Test)	-	75	-
16.5(Oxygen Index Test)	-	582	-
16.6(Flame Retardance Test on Single Cables)	-	75	-
16.7(Flame Retardance Test on Bunched Cables)	-	131	-
16.1(Temperature Index)	-	480	-
16.9(Test for Halogen Acid Gas Evolution)	-	183	-
13.6 g)(ARMOURING: Resistivity)	-	81	-
16.3.1(High Voltage Test ( Water Immersion Test ) : a.c. Test)	-	870	-
16.3.2(High Voltage Test ( Water Immersion Test ) : d.c. Test)	-	870	-
13.3(Armouring : Dimensions -Formed wire )	-	78	-

03 Jan, 2030

-
-

9313

ELMEF TESTING AND CALIBRATION LABORATORIES PRIVATE LIMITED

8138926

IS 694 (2010)

Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 450/750 v (Fourth Revision)

PVC INSULATED UNSHEATHED AND SHEATHED CABLE

14500 View breakup
a) Single core unsheathed Cable=Rs. 4000/- b) Single core sheathed cable = Rs. 5000/- c) Extra charges for outdoor use cable =Rs 3000/- d) Extra charges for low temp. use cable = Rs. 1200/- e) Extra charges for FR Cable = Rs. 8000/- f) Extra charges for FR-LSH cable = Rs. 10000/- g) Separate wire before stranding =Rs 500/- h) Extra charges for each additional core = Rs. 1500/- i) Rs. 900/- for copper purity test only [15% discount to BIS]

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.9(Additional ageing test (OU cables only) -HV test (at 60±3oC))	-	4223	-
10.4(Flammability test- Unaffected portion)	-	125	-
10.4(Flammability test-Burning after flame removal)	-	125	-
table 1 e) 3) (IR constant- max. Temp)	-	176	-
table 1 e) 3) (IR constant- Room temp )	-	176	-
table 1 e) 3) (Volume Resistivity - Maximum temp)	-	176	-
table 1 e) 3) (Volume Resistivity - Room temp )	-	176	-
10.2(HV (room temperature))	-	870	-
10.1(HV (water immersion))	-	870	-
10.8(Smoke density rating)	-	131	-
10.6(Halogen evolution)	-	181	-
10.7(Temperature index)	-	630	-
10.5(Oxygen index)	-	585	-
Table 1 iii) d) 9)(Cold impact for sheath)	-	102	-
Table 1 iii) d) 8)(Cold bend for sheath)	-	102	-
Table 1 iii) c) 9)(Cold impact for insulation)	-	102	-
Table 1 iii) c) 8)(Cold bend for insulation)	-	102	-
Table 1 iii) d) 7)(Thermal stability- Sheath )	-	81	-
Table 1 iii) c) 7)(Thermal stability- Insulation )	-	81	-
Table 1 iii) d) 6)(Hot deformation -Indentation depth - Sheath )	-	90	-
Table 1 iii) c) 6)(Hot deformation - Indentation depth- Insulation)	-	90	-
Table 1 iii) d) 5)(Heat shock-Sheath )	-	90	-
Table 1 iii) c) 5)(Heat shock-Insulation )	-	90	-
Table 1 iii) d) 4)(Shrinkage- Sheath )	-	90	-
Table 1 iii) c) 4)(Shrinkage-Insulation)	-	90	-
Table 1 iii) d) 2)(Loss of mass- Sheath )	-	2670	-
Table 1 iii) c) 2)(Loss of mass- Insulation )	-	2670	-
Table 1 iii) d) 3)(Sheath- Elongation (After ageing))	-	2670	-
Table 1 iii) c) 3)(Tensile strength (After ageing))	-	2670	-
Table 1 iii) c) 1)(Elongation (Without ageing))	-	81	-
Table 1 iii) c) 1)(Tensile strength (Without ageing))	-	81	-
8.3(Thickness of Sheath)	-	75	-
5.3(Thickness of Insulation)	-	75	-
10.11(Per sulphate test (for tinned Cu cable only))	-	125	-
4.2(Conductor resistance test)	-	81	-
4.1(Wrapping test (for Al))	-	75	-
4.1(Tensile test (for Al)- After Stranding)	-	81	-
4.1(Tensile test (for Al)-Before Stranding)	-	81	-
4.1(Annealing test (for copper))	-	81	-
(Cl.16.1) (Cl.19.1)(Conductor- Diameter )	-	75	-
Table 4(Copper purity test)	-	900	-
Table 1 iii) d) 3)(Sheath- Elongation variation)	-	2670	-
Table 1 iii) d) 3)(Sheath- TS variation)	-	2670	-
Table 1 iii) d) 3)(Sheath- Tensile strength (After ageing))	-	2670	-
Table 1 iii) d) 1)(Sheath- Elongation (Without ageing))	-	81	-
Table 1 iii) d) 1)(Sheath -Tensile strength (Without ageing))	-	81	-
Table 1 iii) c) 3)(Elongation variation)	-	2670	-
Table 1 iii) c) 3)(TS variation)	-	81	-
Table 1 iii) c) 3)(Elongation (After ageing))	-	2670	-
9(Overall dimensions)	-	75	-
7(BINDER TAPE)	-	75	-
6(FILLER)	-	75	-

03 Jan, 2030

-
-

9314

ELMEF TESTING AND CALIBRATION LABORATORIES PRIVATE LIMITED

8138926

IS 9537 : Part 3 (1983)

Specification for conduits for electrical installations: Part 3 rigid plain conduits of insulating meterials

PLAIN CONDUITS OF INSULATING METERIALS

10000 View breakup
For BIS samples: 1.5 times of BIS testing charges, for other: Rs. 10000/- (15% Discount to BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1.1(Maximum and minimum outside diameter of socket)	-	75	-
7.1.2(Maximum and minimum outside diameter of conduit)	-	75	-
7.4(Unifomity of The wall Thickness)	-	75	-
7.2(Minimum inside diameter of conduit)	-	75	-
9.2(Bending Test i) At Room Temp ii) At Low Temp (-5 ±2°C))	-	75	-
9.3(Compression Test as per caluse 9.3 of IS: 9537 (Part 1)-1980)	-	78	-
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	78	-
9.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	75	-
10(Resistance to Heat -Ball presure test)	-	75	-
11(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	75	-
12(Electrical Characteristics-Test for electric strength as per clause 12.1.1 of IS: 9537 (Part 1)-1980)	-	75	-
12(Electrical Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-	75	-
9.3(Compression Test at Full force applied (On load))	-	78	-
7.3(Length of conduit)	-	75	-
6.1(Marking)	-	75	-

03 Jan, 2030

-
-

9315

ELMEF TESTING AND CALIBRATION LABORATORIES PRIVATE LIMITED

8138926

IS 7098 : Part 1 (1988)

Specification for crosslinked polyethylene insulated pvc sheathed cables: Part 1 for working voltages up to and including 1100 volts (First Revision)

XLPE Insulated, PVC Sheathed Armored cable

22500 View breakup
a) Single core unsheathed Cable=Rs. 5500/- b) Single core sheathed cable = Rs. 6500/- c) Extra charges for FR Cable = Rs. 11000/- d) Extra charges for FR-LSH cable = Rs. 14000/- c) Extra charges for armouring cable =Rs 4000/- d) Extra charges for mining cable = Rs. 1200/- g) Separate wire before stranding =Rs 500/- h) Extra charges for each additional core = Rs. 1500/- i) Optional test (if required) = Rs. 800/- [15% discount to BIS]

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.2(Thickness of Insulation - Average)	-	75	-
9.3(Thickness of Insulation - Minimum)	-	75	-
13.1.2(Armouring: Coverage )	-	75	-
13.3(Armouring : Dimensions -Wire Diameter)	-	78	-
13.3(Armouring : Dimensions -Formed wire )	-	78	-
13.5(Armouring : Resistance Test)	-	81	-
13.6 a)(ARMOURING: Tensile Strength)	-	78	-
13.6 b)(ARMOURING: Elongation )	-	78	-
13.6 c)(ARMOURING: Torsion Test (For round wire ) )	-	78	-
13.6 d)(ARMOURING: Winding Test(For formed wire))	-	128	-
13.6 e)(ARMOURING: Uniformity of zinc coating)	-	125	-
13.6 f)(ARMOURING: Mass of zinc coating )	-	78	-
14.3(Thickness of outer sheath - AVERAGE)	-	75	-
14.3(Thickness of outer sheath - minimum)	-	75	-
15.1 a) i)(Annealing Test ( For copper wire ) )	-	78	-
15.1 a) ii)(Tensile test (for aluminium) - Before stranding )	-	78	-
15.1 a) ii)(Tensile test (for aluminium) - After stranding )	-	78	-
15.1 a) iii)(Wrapping test (for aluminium))	-	75	-
15.1 a) iv)(Resistance test - Main conductor)	-	81	-
15.1 a) iv)(Resistance test - Neutral conductor)	-	81	-
15.1 d) i) (Phyaical tests for insulation : Tensile Test)	-	81	-
15.1 d) i) (Phyaical tests for insulation : Elongation)	-	81	-
15.1 d) ii) (Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-	2670	-
15.1 e) ii) (Physical tests for outer sheath -Ageing in air oven : Elongation )	-	2670	-
15.1 d) iii) (Phyaical tests for insulation : Hot set )	-	90	-
15.1 d) iv) (Phyaical tests for insulation : Shrinkage )	-	90	-
15.1 e) iii) (Sheath: Loss of mass in air oven)	-	2670	-
15.1 d) v) (Insulation: Waterabsorption(gravimetric))	-	870	-
15.1 e) i) (Physical tests for outer sheath : Tensile stregth)	-	81	-
15.1 e) ii) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-	2670	-
15.1 e) iv) (Phyaical tests for Sheath : Shrinkage )	-	90	-
15.1 e) v) (Sheath : Hot deformation)	-	2670	-
15.1 e) vi) (Sheath : Heat shock test)	-	81	-
15.1 e) vii) (Sheath : Thermalstability)	-	156	-
15.1 f)(INSULATION RESISTANCE TEST : Volume resistivity )	-	1017	-
16.2(HIGH VOLTAGE TEST )	-	75	-
16.3(FLAMMABILITY TEST : Unaffected length )	-	582	-
16.9(Oxygen Index Test)	-	75	-
16.14(Temperature Index)	-	78	-
16.1(Flame Retardance Test on Single Cables)	-	131	-
16.11(Flame Retardance Test on Bunched Cables)	-	183	-
16.13(Test for Halogen Acid Gas Evolution)	-	480	-
13.6 g)(ARMOURING: Resistivity)	-	81	-
3(CONDUCTOR: MATERIALS)	-	78	-
12.1 & 12.2(Inner sheath : Application)	-	78	-
14.1(Outer Sheath : Application)	-	78	-
14.2(Colour of outer sheath)	-	81	-

03 Jan, 2030

-
-

9316

ELMEF TESTING AND CALIBRATION LABORATORIES PRIVATE LIMITED

8138926

IS 398 : Part 4 (1994)

Aluminium conductors for overhead transmission purposes: Part 4 aluminium alloy stranded conductors (Aluminium - Magnesium - Silicon Type) - Specification (Third Revision)

Aluminum Alloy Stranded conductor

1500 View breakup
Rs. 1500/- for 7 strands, Rs. 3700/- for 19 strands (15% discount to BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1 Table-1(Dimensional measurement of wires)	-	300	-
7.2.2 Table-2, Table-4(Calculated resistance of Stranded Conductor)	-	300	-
12.2 Table 1(Breaking Load Test- Before Stranding)	-	300	-
12.2 Table 1(Breaking Load Test- After Stranding)	-	300	-
12.3 Table 1(Elongation Test- Before Stranding)	-	300	-
12.3 Table 1(Elongation Test- After Stranding)	-	300	-
9.2 Table 3(Lay Ratio of stranded conductors)	-	300	-
9.2(Lay Ratio 3/6 wire layer)	-	300	-
9.2(Lay Ratio 12 wire layer)	-	300	-
9.2(Lay Ratio 18 wire layer)	-	300	-
9.2(Lay Ratio 24 wire layer)	-	300	-
6.1(Freedom from Defects)	-	300	-
8.1(Joints in wires-Conductors Containing Seven Wires)	-	300	-
8.2(Joints in wires-Conductors Containing More Than Seven Wires)	-	300	-
9.1(Stranding)	-	300	-
9.3(Direction of Lay)	-	300	-
9.4(Multiple layers of wires)	-	300	-

03 Jan, 2030

-
-

9317

ELMEF TESTING AND CALIBRATION LABORATORIES PRIVATE LIMITED

8138926

IS 14255 (1995)

Aertal bunched cables - For working voltages up to and including 1100 Volts - Specification

AERTAL BUNCHED CABLES

9900 View breakup
a) For one core = Rs 4400/- b) Extra Charges for each additional core = Rs. 1500/- c) Bare messenger conductor =Rs. 1000/- d) Separate wire before stranding =Rs 500/- e) Insulated messenger conductor =Rs. 1500/- f) Optional test (if Required)= Rs 800/- (15% Discount to BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.2( Thickness of insulation)	-	75	-
10.1 a) i)(Tests on phase/street light conductor: tensile test - Test method IS10810:Part 2)	-	78	-
10.1 a) ii)(Wrapping test - 10810: Part 3)	-	75	-
10.1 b) i)(Test on messenger conductor: Breaking load - IS 10810: Part 2)	-	78	-
10.1 b) ii)(Test on messenger conductor: Elongation test - Cl 11.3)	-	78	-
10.1 b) iii)(Test on messenger conductor: Resistance test - IS 10810: Part 5)	-	78	-
10.1 c) i)(Physical tests for XLPE Insulation: Tensile strength - IS 10810: Part 7)	-	78	-
10.1 c) i)(Physical tests for XLPE Insulation: elongation at break - IS 10810: part 7)	-	78	-
10.1 c) ii)(Ageing in air oven : Tensile strength variation - IS 10810:Part 11)	-	2670	-
10.1 c) ii)(Ageing in air oven : Elongation variation- IS 10810: Part 11)	-	2670	-
10.1 c) iii)(Hot set test: Elongation under load - IS 10810: Part 30)	-	2670	-
10.1 c) iii)(Hot set test: Permanent elongation (set) after cooling - IS 10810: Part 30)	-	2670	-
10.1 c) iv)(Shrinkage test : Shrinkage - 10810:Part 12)	-	165	-
10.1 c) v)(Water ahsorption (Gravimetric) - IS 10810: Part 33 )	-	5475	-
10.1 f)(Insulation resistance (Volume resistivity) test a) volume resistivity at 27°C - IS 10810: Part 43)	-	153	-
10.1 f)(Insulation resistance (Volume resistivity) test b) volume resistivity at 70°C - IS 10810: Part 43)	-	153	-
10.1 g)(High voltage test - IS10810:Part 45)	-	153	-
11.4(Bending Test on the Completed Cable ( Optional) )	-	75	-

03 Jan, 2030

-
Only XLPE insulation

9318

ELMEF TESTING AND CALIBRATION LABORATORIES PRIVATE LIMITED

8138926

IS 398 : Part 1 (1996)

Aluminium conductors for overhead transmission purposes - Specification: Part 1 aluminium stranded conductors (Third Revision)

Aluminium conductor for overhead Transmission purpose

1500 View breakup
Rs. 1500/- for 7 strands, Rs. 3700/- for 19 strands (15% Discount to BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12.2, Table-1(Measurement of diameter of individual aluminium wire)	-	300	-
12.3, Table-1(Breaking load before stranding)	-	300	-
12.3, Table-1(Breaking load after stranding)	-	300	-
12.4(Wrapping test)	-	300	-
12.5, Table 1(Resistance test)	-	300	-
12.6, Table 3(Measurement of lay ratio)	-	300	-
6(Freedom from defects)	-	300	-
7.2.1(Sizes)	-	300	-
7.1.1(Nominal Sizes)	-	300	-
7.2.2(Resistance)	-	300	-
8, 8.1, 8.2(Joint in wires, except during stranding)	-	300	-
9.3(Stranding)	-	300	-
9.2(Lay ratio)	-	300	-
9.4(Multiple layer of wires)	-	300	-

03 Jan, 2030

-
-

9319

ELMEF TESTING AND CALIBRATION LABORATORIES PRIVATE LIMITED

8138926

IS 398 : Part 2 (1996)

Aluminium conductors for overhead transmission purposes - Specification: Part 2 aluminium conuuctors, galvanized steel - Reinforced (Third Revision)

Aluminium Conductor Galvanized steel reinforced

7900 View breakup
For BIS samples: 1.5 times of BIS testing charges, for other: Rs. 7900/- (15% Discount to BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1.1 & 13.2 Table-1 (mech)(Diameter of Aluminium Wires Before Stranding)	-	304	-
8.1.1 & 13.2 Table 2 (mech)(Diameter of Steel Wires Before Stranding)	-	304	-
8.1.1 & 13.2 Table-1 (mech)(Diameter of Aluminium Wires After Stranding)	-	304	-
8.1.1 & 13.2 Table 2 (mech)(Diameter of Steel Wires After Stranding)	-	304	-
13.3 Table 1 (mech)(Breaking Load of Aluminium Wires Before Stranding)	-	304	-
13.3 Table 2 (mech)(Breaking Load of Steel Wires Before Stranding)	-	304	-
13.3 Table 1 (mech)(Breaking Load of Aluminium Wires After Stranding)	-	304	-
13.3 Table 2 (mech)(Breaking Load of Steel Wires After Stranding)	-	304	-
13.4.1 (mech)(Ductility by Torsion Test before stranding)	-	304	-
13.4.1 (mech)(Ductility by Torsion Test before stranding)	-	304	-
13.4.1 (mech)(Ductility by Torsion Test after stranding)	-	304	-
13.4.2 (elec)(Ductility by Elongation Test before stranding)	-	304	-
13.4.2 (elec)(Ductility by Elongation Test after stranding)	-	304	-
13.5.1 (mech)(Wrapping Test Aluminium Wires Before Stranding)	-	304	-
13.5.1 (mech)(Wrapping Test Aluminium Wires After Stranding)	-	304	-
13.5.2 (mech)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	304	-
13.5.2 (mech)(Wrapping Test Galvanized Steel Wires After Stranding)	-	304	-
13.6 (elec)(Resistance test-Aluminium wire before Stranding)	-	304	-
13.6 (elec)(Resistance test-Aluminium wire after stranding)	-	303	-
13.7.2 (chem)(Mass of Zinc coating)	-	304	-
13.7.2 (chem)(Uniformity of Zinc coating)	-	304	-
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Outermost Layer)	-	304	-
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	304	-
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	304	-
13.8 Table-4 (mech)(Lay Ratio- Steel Core (6 Wire Layer))	-	304	-
13.10 (elec)(Ultimate breaking load)	-	304	-
7(FREEDOM FROM DEFECTS)	-	304	-
9(Joint in wires)	-	304	-
14.2(a), 8.2.1(Sizes)	-	304	-
13.9 (elec)(Surface condition test)	-	0	-
13.11 (elec)(Stress-strain test)	-	0	--

03 Jan, 2030

-
Restricted for conductor size below 100 mm2

9320

BIS, Central Laboratory (CL)

None

IS 8521 : Part 1 (2022)

Eye and Face Protection for Occupational Use Part 1 General Requirements (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-4.3 (Construction and adjustment)	-
Cl-7.5 (Resistance to thermal exposure)	-
Cl-7.7 (Resistance to corrosion)	-
Cl-8 (Marking of protectors)	-

-
partial facility

9321

Samridhi Test House Pvt. Ltd.

8184706

IS 17550 : PART 1 (2021)

HOUSEHOLD REFRIGERATING APPLIANCES CHARACTERISTICS AND TEST METHODS Part 1 General Requirements

200000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
"Cl. No. 9 "(Testing The Air Tightness Of Door Or Lid Seal(S))	-	6600	-
"Cl. No.10 "(Testing The Opening Force Of Door(S) Or Lid(S))	-	9500	-
"Cl. No.11 "(Testing The Durability Of Hinges And Handles Of Door(S) And Lid(S))	-	38000	-
"Cl. No.12 "(Testing The Mechanical Strength Of Shelves And Similar Components)	-	12000	-
"Cl. No.14 "(Ice-Making Test (If Applicable))	-	19000	-
"Cl. No.15 "(Test For Absence Of Odour And Taste)	-	42000	-
"Cl. No.16 "(Safety Requirements)	-	42400	-
"Cl. No. 9 "(Testing The Air Tightness Of Door Or Lid Seal(S))	-	0	Repeat Test
"Cl. No.10 "(Testing The Opening Force Of Door(S) Or Lid(S))	-	0	Repeat Test
"Cl. No.11 "(Testing The Durability Of Hinges And Handles Of Door(S) And Lid(S))	-	0	Repeat Test
"Cl. No.12 "(Testing The Mechanical Strength Of Shelves And Similar Components)	-	0	Repeat Test
"Cl. No.14 "(Ice-Making Test (If Applicable))	-	0	Repeat Test
"Cl. No.15 "(Test For Absence Of Odour And Taste)	-	0	Repeat Test
"Cl. No.16(a) "(Protection against acess to live parts)	-	5000	-
"Cl. No.16(b) "(Power input and current)	-	9000	-
"Cl. No.16(c) "(Heating)	-	7000	-
"Cl. No.16(d) "(Leakage current and electric strength at operating temperature)	-	5700	-
"Cl. No.16(e) "(Moisture resistance)	-	10000	-
"Cl. No.16(f) "(Leakage current and electric strength)	-	5700	-
"Cl. No.20.3(a) "("Production Routine Test a)Leakage current test ")	-	2800	-
"Cl. No.20.3(b) "(b) Earth continuity tesT)	-	2800	-
"Cl. No.20.3(c) "(c) Electric strength)	-	2800	-
"Cl. No.8.11 "(Thermostat function test)	-	500	-
"Cl. No.5 "(Markings)	-	2400	-
4(Classification)	-	500	-
5(Marking)	-	0	Repeat Test
6.2(Determination of Linear Dimensions)	-	1000	-
7(Instructions)	-	500	-
8.2(Material and Finishes)	-	500	-
8.3(Thermal Insulation and Air Tightness)	-	500	-
8.4(Doors, Lids and Fittings)	-	500	-
8.5(Shelves and Containers)	-	500	-
8.6(Disposal of Defrost Water)	-	500	-
8.7(Refrigerating System)	-	500	-
8.8(Supply Cord)	-	500	-
8.9(Compressor)	-	500	-
8.10(Temperature Sensing Controls (Thermostat))	-	500	-
8.11(Temperature Sensing Controls (Thermostat) Setting)	-	0	Repeat Test
9(Testing the Air tightness of door or lid seal(s) before water vapour condensation test)	-	0	Repeat Test
9(Testing the Air tightness of door or lid seal(s) after water vapour condensation test)	-	0	Repeat Test
10(Testing the Opening force of door(s) or lid(s))	-	0	Repeat Test
11(Testing the Durability of hinges and handles of door(s) and lid(s))	-	0	Repeat Test
12(Testing the Mechanical strength of shelves and similar components)	-	0	Repeat Test
13(Water-vapour condensation test)	-	6000	-
14(Ice-making test (if applicable))	-	0	Repeat Test
15(Test for absence of odour and taste)	-	0	Repeat Test
16(a)(Protection against access to live parts)	-	0	Repeated Test
16(b)(Power input and current)	-	0	Repeated Test
16 (c(Heating)	-	0	Repeated Test
16(d)(Leakage current and electric strength at operating temperature)	-	0	Repeated Test
16(e)(Moisture resistance)	-	0	Repeated Test
16(f)(Leakage current and electric strength (high voltage after humidity))	-	0	Repeated Test
17(Packing)	-	1000	-
18(Designation)	-	1000	-
19(Instructions for Use and Maintenance)	-	4700	-
20.3 (a)(Leakage Current Test)	-	0	Repeat Test
20.3 (b)(Earth Continuity Test)	-	0	Repeat Test
20.3 (c(Electric Strength Test)	-	0	Repeat Test

08 Apr, 2028

-
Included w.e.f 21.05.2025

9322

IDMA LABORATORIES LIMITED, PANCHKULA

9123236

IS 7686 (2020)

Specification for 3 ( N, N-Diethyl ) Aminophenol ( First Revision )

16000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 3.1(Description)	-	1000	-
Cl. 3.2(Solubility in alcohol, ether, sodium hydroxide and hydrochloric acid)	-	2000	-
Cl. 3.3, Table 1, Sr. No (i), A-2(Crystallizing point,)	-	3500	-
Cl. 3.3, Table 1, Sr. No (ii), A-3(Purity by CV)	-	3000	-
Cl. 3.3, Table 1, Sr. No (iii), B(Purity by HPLC)	-	4000	-
Cl. 3.3, Table 1, Sr. No (iv), C(Salt content as NaCl)	-	2500	-
Cl. 3.1(Description)	-	0	NA
Cl. 3.2(Solubility in alcohol, ether, sodium hydroxide and hydrochloric acid)	-	0	NA
Cl. 3.3, Table 1, Sr. No (i), A-2(Crystallizing point,)	-	0	NA
Cl. 3.3, Table 1, Sr. No (ii), A-3(Purity by CV)	-	0	NA
Cl. 3.3, Table 1, Sr. No (iii), B(Purity by HPLC)	-	0	NA
Cl. 3.3, Table 1, Sr. No (iv), C(Salt content as NaCl)	-	0	NA

31 Dec, 2029

-
Included w.e.f. 03.03.2025

9323

URS PRODUCTS AND TESTING PVT. LTD. (A29), NOIDA

8168906

IS 1117 (2018)

Laboratory glassware - Single - Volume pipettes (Second Revision)

13000 View breakup
-

Clause No.	Exclusion	Remark
6.1.1&3(Marking)	-	-
3(Class of Accuracy)	-	-
4.1(Nominal capacities)	-	-
4.2(Accuracy)	-	-
5.1(Material)	-	-
5.1(Material)	-	-
5.1.1(Limit of Alkalinity)	-	-
5.2(Pattern of Pipette)	-	-
5.3(Workmanship & Finish)	-	-
5.4(i) Distance of graduation line from top of pipette.)	-	-
5.4(ii) Distance from graduation line to top of bulb(pattern 2))	-	-
5.4(iii)Distance from graduation line to tip of jet (Pattern 1))	-	-
5.4(iv) Wall thickness)	-	-
5.4(a) pattern 2 pipette of 1 and 2ml )	-	-
5.4(b) Other pipettes)	-	-
5.4(v) Dia. of safety bulb (if provided ))	-	-
5.4(vi)Distance from top of pipette to bottom of safety bulb )	-	-
5.4(vii) Overall length, L)	-	-
5.4(viii) Length of suction tube, L1 )	-	-
5.4(ix) Length of delivery tube, L2 )	-	-
5.4(x) Internal dia. of suction tube D1 )	-	-
5.4(xi) External dia. of bulb D2 )	-	-
5.4(xii) External dia. of delivery tube D3 )	-	-
5.5(Delivery Time)	-	-
5.5(Delivery Time)	-	-
5.6&7(Graduation line & Visibility )	-	-
6.1.2(Marking)	-	-
6.1.1&3(Marking)	-	-
3(Class of Accuracy)	-	-
4.1(Nominal capacities)	-	-
4.2(Accuracy)	-	-
5.1(Material)	-	-
5.1(Material)	-	-
5.1.1(Limit of Alkalinity)	-	-
5.2(Pattern of Pipette)	-	-
5.3(Workmanship & Finish)	-	-
5.4(i) Distance of graduation line from top of pipette.)	-	-
5.4(ii) Distance from graduation line to top of bulb(pattern 2))	-	-
5.4(iii)Distance from graduation line to tip of jet (Pattern 1))	-	-
5.4(iv) Wall thickness)	-	-
5.4(a) pattern 2 pipette of 1 and 2ml )	-	-
5.4(b) Other pipettes)	-	-
5.4(v) Dia. of safety bulb (if provided ))	-	-
5.4(vi)Distance from top of pipette to bottom of safety bulb )	-	-
5.4(vii) Overall length, L)	-	-
5.4(viii) Length of suction tube, L1 )	-	-
5.4(ix) Length of delivery tube, L2 )	-	-
5.4(x) Internal dia. of suction tube D1 )	-	-
5.4(xi) External dia. of bulb D2 )	-	-
5.4(xii) External dia. of delivery tube D3 )	-	-
5.5(Delivery Time)	-	-
5.5(Delivery Time)	-	-
5.6&7(Graduation line & Visibility )	-	-
6.1.2(Marking)	-	-
6.1.1&3(Marking)	-	-
3(Class of Accuracy)	-	-
4.1(Nominal capacities)	-	-
4.2(Accuracy)	-	-
5.1(Material)	-	-
5.1(Material)	-	-
5.1.1(Limit of Alkalinity)	-	-
5.2(Pattern of Pipette)	-	-
5.3(Workmanship & Finish)	-	-
5.4(i) Distance of graduation line from top of pipette.)	-	-
5.4(ii) Distance from graduation line to top of bulb(pattern 2))	-	-
5.4(iii)Distance from graduation line to tip of jet (Pattern 1))	-	-
5.4(iv) Wall thickness)	-	-
5.4(a) pattern 2 pipette of 1 and 2ml )	-	-
5.4(b) Other pipettes)	-	-
5.4(v) Dia. of safety bulb (if provided ))	-	-
5.4(vi)Distance from top of pipette to bottom of safety bulb )	-	-
5.4(vii) Overall length, L)	-	-
5.4(viii) Length of suction tube, L1 )	-	-
5.4(ix) Length of delivery tube, L2 )	-	-
5.4(x) Internal dia. of suction tube D1 )	-	-
5.4(xi) External dia. of bulb D2 )	-	-
5.4(xii) External dia. of delivery tube D3 )	-	-
5.5(Delivery Time)	-	-
5.5(Delivery Time)	-	-
5.6&7(Graduation line & Visibility )	-	-
6.1.2(Marking)	-	-
4.1(unit of volume)	-	-
4.2(delivery volume)	-	-
4.3(reference temperature)	-	-
5.1(Types and Classes of accuracy)	-	-
5.2(Types of single- volume pipette)	-	-
7.1(Material)	-	-
7.2(Shape)	-	-
7.3(Bulb)	-	-
7.4(Dimensions)	-	-
7.5(Top of Pipette)	-	-
7.6(Delivery Jet)	-	-
7.7(Delivery Time)	-	-
7.8(Waiting Time)	-	-
Clause- 8.0(Graduation Line)	-	-
Clause- 9.0(Setting of the Meniscus)	-	-
Clause-10.0(Marking)	-	-
Clause- 6.0(Maximum Permissible error)	-	-

26 Sep, 2027

-
Included w.e.f. 30.10.2024

9324

URS PRODUCTS AND TESTING PVT. LTD. (A29), NOIDA

8168906

IS 1381 : Part 1 (2003)

Laboratory glassware - Narrow - Necked boiling flasks (Second Revision)

12000 View breakup
-

Clause No.	Exclusion	Remark
3, 4(Type of Flask)	-	-
3.1, 4.1(Series of Nominal Capacity)	-	-
3.2, 4.2(Nominal Capacity )	-	-
3.3, 4.3(Material )	-	-
3.4, 3.4.1 & 4.4, 4.4.1(Construction- a) Stability )	-	-
3.4, 3.4.2 & 4.4, 4.4.2(Construction- b) Neck )	-	-
3.5, 4.5(Dimensions (in mm) (Table 1&2))	-	-
3.5.2(Neck Length)	-	-
3.5.3, 4.5.2(Dimensions of base )	-	-
3.5.4, 4.5.3(Wall thickness)	-	-
5(Marking )	-	-

26 Sep, 2027

-
Included w.e.f.05.11.2024

9325

Samridhi Test House Pvt. Ltd.

8184706

IS 2925 (1984)

Specification for industrial safety helmets (Second Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Shell)	-	500	-
3.2(Harness)	-	200	-
3.3(Metal Parts)	-	2000	-
4.1(Sizes)	-	500	-
5.1(Shell)	-	100	-
5.2(Harness)	-	1000	-
5.3(Chin Strap or Nape Strap)	-	2000	-
5.4(Lamp Bracket)	-	1000	-
5.5(Cable Clip)	-	1000	-
6.1(Workmanship & Finish)	-	100	-
7.1(Mass)	-	500	-
8.1(Shock Absorption Resistance)	-	1000	-
8.2(Penetration Resistance)	-	1000	-
8.3(Flamability Resistance)	-	1000	-
8.4(Electrical Resistance)	-	1000	-
8.5(Water Absorption)	-	1000	-
8.6(Heat Resistance)	-	1000	-
3.1(Shell)	-	0	Repeated Test
3.2(Harness)	-	0	Repeated Test
3.3(Metal Parts)	-	0	Repeated Test
4.1(Sizes)	-	0	Repeated Test
5.1(Shell)	-	0	Repeated Test
5.2(Harness)	-	0	Repeated Test
5.3(Chin Strap or Nape Strap)	-	0	Repeated Test
5.4(Lamp Bracket)	-	0	Repeated Test
5.5(Cable Clip)	-	0	Repeated Test
6.1(Workmanship & Finish)	-	0	Repeated Test
7.1(Mass)	-	0	Repeated Test
8.1(Shock Absorption Resistance)	-	0	Repeated Test
8.2(Penetration Resistance)	-	0	Repeated Test
8.3(Flamability Resistance)	-	0	Repeated Test
8.4(Electrical Resistance)	-	0	Repeated Test
8.5(Water Absorption)	-	0	Repeated Test
8.6(Heat Resistance)	-	0	Repeated Test
5.2.1(Head Band)	-	1000	-
5.3.1(Chin Strap)	-	1000	-
5.3.2(Nape Strap)	-	1000	-

08 Apr, 2028

-
-

9326

URS PRODUCTS AND TESTING PVT. LTD. (A29), NOIDA

8168906

IS 915 (2012)

Laboratory glassware - One - Mark volumetric flasks (Third Revision)

13500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1(Material)	-	13500	-
Table 1(Nominal Capacity)	-	13500	-
Table 1(Internal Neck Diameter)	-	13500	-
Table 1(Distance of graduation line)	-	13500	-
Table 1(Overall Height)	-	13500	-
Table 1(Bulb Diameter)	-	13500	-
Table 1(Base Diameter)	-	13500	-
Table 1(Wall Thickness)	-	13500	-
Table 1(Ground joint k4)	-	13500	-
Table 1(Ground joint k6)	-	13500	-
8.3(Shape)	-	13500	-
8.4(Neck)	-	13500	-
8.5(Stopper)	-	13500	-
8.6(Dimensions)	-	13500	-
9.0(Graduation Line)	-	13500	-
Table-2(Nominal capacity)	-	13500	-
Table-2(Internal neck diameter)	-	13500	-
Table-2(Distance of graduation line 1))	-	13500	-
Table-2(Overall height 2))	-	13500	-
Table-2(Bulb diameter)	-	13500	-
Table-2(Base diameter)	-	13500	-
Table-2(Wall thickness)	-	13500	-
Table-2(Ground joint 3) k4)	-	13500	-
Table-2(Ground joint 3) k6)	-	13500	-
12.1(Visibility of graduation line, figures and marking)	-	13500	-
12.2(Visibility of graduation line, figures and marking)	-	13500	-
Clause. 7.0(Accuracy)	-	13500	-

26 Sep, 2027

-
included w.e.f.05.11.2024

9327

IDMA LABORATORIES LIMITED, PANCHKULA

9123236

IS 209 (2024)

Refined Zinc - Specification (Fifth Revision)

13000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 7.1, Cl 7.2 & Table 1(Chemical Composition (Zinc))	-	1500	-
Cl 7.1, Cl 7.2 & Table 1(Chemical Composition (Lead))	-	1500	-
Cl 7.1, Cl 7.2 & Table 1(Chemical Composition (Iron))	-	1500	-
Cl 7.1, Cl 7.2 & Table 1(Chemical Composition (Cadmium))	-	1500	-
Cl 7.1, Cl 7.2 & Table 1(Chemical Composition (Aluminium))	-	1500	-
Cl 7.1, Cl 7.2 & Table 1(Chemical Composition (Copper))	-	1500	-
Cl 7.1, Cl 7.2 & Table 1(Chemical Composition (Tin))	-	1500	-
Cl 7.1, Cl 7.2 & Table 1(Chemical Composition (Total of All Impurities))	-	1500	-
Cl 9.1(Freedom from Defect)	-	1000	-

31 Dec, 2029

-
Included w.e.f.10.12.2024

9328

CSIR-CECRI, CSIR-Battery Performance Testing & Evalauation Centre, Karaikudi

6162524

IS 16270 (2023)

Secondary cells and batteries for solar photovoltaic application - General requirements and methods of test

417600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-8.1(Capacity Test)	-	30000	-
Cl-8.2(Endurance Test)	-	182860	-
Cl-8.3(Charge Retention Test)	-	29880	-
Cl-8.4(Cycle Endurance in Photovoltaic Application (Extreme Conditions))	-	132340	-
Cl-8.5(Sulphation Test (Applicable for Lead Acid Batteries only))	-	6800	-
Cl-8.6(Water Loss Test (Valid for Flooded Lead Acid Batteries only))	-	35720	-
Cl-8.1(Capacity Test)	-	30000	-
Cl-8.2(Endurance Test)	-	182860	-
Cl-8.3(Charge Retention Test)	-	29880	-
Cl-8.4(Cycle Endurance in Photovoltaic Application (Extreme Conditions))	-	132340	-
Cl-8.5(Sulphation Test (Applicable for Lead Acid Batteries only))	-	6800	-
Cl-8.6(Water Loss Test (Valid for Flooded Lead Acid Batteries only))	-	35720	-
Cl-8.1(Capacity Test)	-	30000	-
Cl-8.2(Endurance Test)	-	182860	-
Cl-8.3(Charge Retention Test)	-	29880	-
Cl-8.4(Cycle Endurance in Photovoltaic Application (Extreme Conditions))	-	132340	-
Cl-8.5(Sulphation Test (Applicable for Lead Acid Batteries only))	-	6800	-
Cl-8.6(Water Loss Test (Valid for Flooded Lead Acid Batteries only))	-	35720	-
4.3.7.1(Specific gravity)	-	0	-
Cl-5.4(Marking)	-	0	-

24 Sep, 2027

-
included w.e.f.17.10.2024

9329

CIPET, Madurai

6139834

IS 11584 (1986)

Specification for high density polyethylene (Hdpe) crates for milk satchets

HDPE Crates

7838 View breakup
For Others: Rs.10050/- (For BIS: Rs.6638/-)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.2(Material )	-	2000	25% Discount for BIS
2.3(Shape and Dimensions)	-	500	25% Discount for BIS
2.4(Mass )	-	300	25% Discount for BIS
2.5(Appearance and Surface Finish)	-	300	25% Discount for BIS
2.6(Colour Fastness)	-	300	25% Discount for BIS
2.7(Resistance to Stress)	-	1000	25% Discount for BIS
2.8(Resistance to Applied Load)	-	1100	25% Discount for BIS
2.9(Strength)	-	1100	1200 Specimen conditioning charges 25% Discount for BIS only on testing charges
2.1(Dimensional Stability)	-	900	25% Discount for BIS

22 May, 2027

-
Included w.e.f. 17-02-2021

9330

CIPET, Madurai

6139834

IS 12786 (1989)

Irrigation equipment - Polyethylene pipes for irrigation laterals - Specification

7431 View breakup
For Others: Rs.9175/- Rs.6075/- For raw material (optional) For BIS: Rs.7431/- Rs.5181/- For raw material (optional)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.a (Potyethylene - higher olefins constituent )	-	1050	25 % Discount for BIS on Testing charge
4.1.b(Potyethylene - anti-oxidant)	-	2000	25 % Discount for BIS on Testing charge
4.1.c.i (Density)	-	500	Rs 625 Sample Preparation charge 25 % Discount for BIS on Testing charge
4.1.c.ii (Toluene extract - Annex A)	-	1100	25 % Discount for BIS on Testing charge
4.1.c.iii (Volatile matter - Annex B )	-	700	25 % Discount for BIS on Testing charge
4.1.c & 4.2.a (Carbon Black content - IS 2530 : 1963)	-	925	25 % Discount for BIS on Testing charge
4.2.b (The dispersion of Carbon Black content shall be satisfactory - IS 2530 : 1963)	-	700	25 % Discount for BIS on Testing charge
7.3(Tensile Test)	-	1100	Rs 300 Sample Preparation charge 25 % Discount for BIS on Testing charge
7.4(SusceptibiIity to Environmental Stress Cracking)	-	1200	25 % Discount for BIS on Testing charge
7.3(Elongation at Break)	-	0	With Tensile strength
5 and Table 1(DIMENSIONS OF PIPES - outside diameters)	-	250	25 % Discount for BIS on Testing charge
5 and Table 1(DIMENSIONS OF PIPES - wall thickness shall)	-	0	Rs 300 Inclusive of all dimension
7.2(Reversion Test)	-	1100	Rs 250 Sample Preparation charge 25 % Discount for BIS on Testing charge

22 May, 2027

-
Included w.e.f. 17-02-2021

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number