BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15656 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

9361

Ahmedabad Textile Industry's Research Association (ATIRA), Ahmedabad

7173002

IS 17070 (2019)

Jute agrotextiles for growth of plant and suppression of weeds – Specification

7900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5 -Table 1 -(i)(Mass at 20 percent moisture regain)	-	800	-
5 -Table 1 -(ii)(Thickness)	-	450	-
5 -Table 1 -(iii)(Width)	-	200	-
5 -Table 1 -(iv)(Wide width tensile strength)	-	1650	-
5 -Table 1 -(v)(Tear strength)	-	900	-
5 -Table 1 -(vi)(Bursting strength)	-	800	-
5 -Table 1 -(vii)(Index Puncture resistance)	-	1350	-
5 -Table 1 -(viii)(Air permeability)	-	650	-
5-Table 1 -(ix)(Water permittivity)	-	1100	-

-
Included w.e.f 10.10.2024 Excluding Cl 8 (Marking)

9362

DELHI TEST HOUSE, Azadhpur

8131406

IS 210 (2009)

Grey iron castings - Specification (First Revision)

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.1(FREEDOM FROM DEFECTS)	-	500	TESTING CHARGES :-Rs.9000/-
10.2(FREEDOM FROM DEFECTS)	-	500	TESTING CHARGES :-Rs.9000/-
15, Table 3(TENSIL.E TEST- IS 1608 Part1 )	-	2000	TESTING CHARGES :-Rs.9000/-
16, Table 3(Hardness Test)	-	1000	TESTING CHARGES :-Rs.9000/-
6(Chemical Composition(chemical composition shall be as agreed to between the purchaser and the manufacturer.))	-	5500	TESTING CHARGES :-Rs.9000/-
10.1(FREEDOM FROM DEFECTS)	-	500	TESTING CHARGES :-Rs.9000/-
10.2(FREEDOM FROM DEFECTS)	-	500	TESTING CHARGES :-Rs.9000/-
15, Table 3(TENSIL.E TEST- IS 1608 Part1 )	-	2000	TESTING CHARGES :-Rs.9000/-
16, Table 3(Hardness Test)	-	1000	TESTING CHARGES :-Rs.9000/-
21(Marking)	-	250	TESTING CHARGES :-Rs.9000/-
6(Chemical Composition(chemical composition shall be as agreed to between the purchaser and the manufacturer.))	-	5500	TESTING CHARGES :-Rs.9000/-

17 Jun, 2027

-
Included w.e.f 15.10.2024 Excluding Cl 9 (Microstructure) Optional Test

9363

Stellar Test House, Noida

8171606

IS 1293 (2019)

Plugs and socket - Outlets of rated Voltage up to and including 250 Volts and rated current up to and including 16 amperes - Specification (Third Revision)

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(RATINGS)	-	20	5% discount for BIS
7.1.1(Accessories Classification)	-	20	5% discount for BIS
7.1.2(Accessories Classification)	-	20	5% discount for BIS
7.1.3(Accessories Classification)	-	20	5% discount for BIS
7.1.4(Accessories Classification)	-	20	5% discount for BIS
7.1.5(Accessories Classification)	-	20	5% discount for BIS
7.2.1(Socket-Outlets Classification)	-	20	5% discount for BIS
7.2.2(Socket-Outlets Classification)	-	20	5% discount for BIS
7.2.3(Socket-Outlets Classification)	-	20	5% discount for BIS
7.2.4(Socket-Outlets Classification)	-	20	5% discount for BIS
7.3(Plug Classification)	-	20	5% discount for BIS
8(Marking)	-	20	5% discount for BIS
9(CHECKING OF DIMENSIONS)	-	50	5% discount for BIS
10(PROTECTION AGAINST ELECTRIC SHOCK)	-	50	5% discount for BIS
11(Provision for earthing)	-	50	5% discount for BIS
12(terminals)	-	50	5% discount for BIS
13.1(Construction of fixed Socket Outlets)	-	50	5% discount for BIS
13.2(Construction of fixed Socket Outlets)	-	50	5% discount for BIS
13.3(Construction of fixed Socket Outlets)	-	50	5% discount for BIS
13.4(Construction of fixed Socket Outlets)	-	50	5% discount for BIS
13.5(Construction of fixed Socket Outlets)	-	50	5% discount for BIS
13.6(Construction of fixed Socket Outlets)	-	50	5% discount for BIS
13.7(Construction of fixed Socket Outlets)	-	50	5% discount for BIS
13.8(Construction of fixed Socket Outlets)	-	50	5% discount for BIS
13.9(Construction of fixed Socket Outlets)	-	50	5% discount for BIS
13.10(Construction of fixed Socket Outlets)	-	50	5% discount for BIS
13.11(Construction of fixed Socket Outlets)	-	50	5% discount for BIS
13.12(Construction of fixed Socket Outlets)	-	50	5% discount for BIS
13.13(Construction of fixed Socket Outlets)	-	50	5% discount for BIS
13.14(Construction of fixed Socket Outlets)	-	50	5% discount for BIS
13.15(Construction of fixed Socket Outlets)	-	50	5% discount for BIS
13.16(Construction of fixed Socket Outlets)	-	50	5% discount for BIS
13.17(Construction of fixed Socket Outlets)	-	50	5% discount for BIS
13.18(Construction of fixed Socket Outlets)	-	50	5% discount for BIS
13.19(Construction of fixed Socket Outlets)	-	50	5% discount for BIS
13.2(Construction of fixed Socket Outlets)	-	50	5% discount for BIS
13.21(Construction of fixed Socket Outlets)	-	50	5% discount for BIS
13.22(Construction of fixed Socket Outlets)	-	50	5% discount for BIS
13.23(Construction of fixed Socket Outlets)	-	50	5% discount for BIS
14.1(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	50	5% discount for BIS
14.2(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	50	5% discount for BIS
14.3(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	50	5% discount for BIS
14.4(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	50	5% discount for BIS
14.5(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	50	5% discount for BIS
14.6(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	50	5% discount for BIS
14.7(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	50	5% discount for BIS
14.8(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	50	5% discount for BIS
14.9(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	50	5% discount for BIS
14.10(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	50	5% discount for BIS
14.11(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	50	5% discount for BIS
14.12(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	50	5% discount for BIS
14.13(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	50	5% discount for BIS
14.14(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	50	5% discount for BIS
14.15(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	50	5% discount for BIS
14.16(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	50	5% discount for BIS
14.17(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	50	5% discount for BIS
14.18(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	50	5% discount for BIS
14.19(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	50	5% discount for BIS
14.20(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	50	5% discount for BIS
14.21(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	50	5% discount for BIS
14.22(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	50	5% discount for BIS
14.23(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	50	5% discount for BIS
14.24(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	50	5% discount for BIS
14.25(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	50	5% discount for BIS
14.26(CONSTRUCTION OF PLUGS AND PORTABLE SOCKETOUTLET)	-	50	5% discount for BIS
15(INTERLOCKED SOCKET-OUTLETS)	-	50	5% discount for BIS
16.1(Resistance to Ageing)	-	250	5% discount for BIS
16.2(RESISTANCE TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	260	5% discount for BIS
16.3(Resistance to Humidity)	-	250	5% discount for BIS
17.1(RESISTANCE AND ELECTRIC STRENGTH)	-	200	5% discount for BIS
17.2(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	200	5% discount for BIS
17.3(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	200	5% discount for BIS
18(OPERATION OF EARTHING CONTACTS)	-	100	5% discount for BIS
19(TEMPERATURE RISE)	-	300	5% discount for BIS
20(Making & Breaking Capacity)	-	400	5% discount for BIS
21(Normal Operation)	-	400	5% discount for BIS
22.1(Verification of the Maximum Withdrawal Force)	-	50	5% discount for BIS
22.2(Verification of Minimum Withdrawal Force)	-	50	5% discount for BIS
23.1(FLEXIBLE CABLES AND THEIR CONNECTION)	-	50	5% discount for BIS
23.2(FLEXIBLE CABLES AND THEIR CONNECTION)	-	50	5% discount for BIS
23.3(FLEXIBLE CABLES AND THEIR CONNECTION)	-	50	5% discount for BIS
23.4(FLEXIBLE CABLES AND THEIR CONNECTION)	-	50	5% discount for BIS
24.1(MECHANICAL STRENGTH For all kinds of fixed socketoutlets)	-	200	5% discount for BIS
24.1(MECHANICAL STRENGTH For portable multiple and combined socket outlets with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	200	5% discount for BIS
24.1(MECHANICAL STRENGTH For surface mounting boxes)	-	200	5% discount for BIS
24.2(MECHANICAL STRENGTH For portable single socket-outlets: 1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	200	5% discount for BIS
24.2(MECHANICAL STRENGTH For portable multiple and combined socket outlets: 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	200	5% discount for BIS
24.2(MECHANICAL STRENGTH For plug 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	200	5% discount for BIS
24.2(MECHANICAL STRENGTH For plug 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	200	5% discount for BIS
24.3(MECHANICAL STRENGTH for fixed socket-outlets with a main part intended to be mounted directly on a surface)	-	200	5% discount for BIS
24.4(MECHANICAL STRENGTH For portable single socket-outlets: 1) with enclosures, covers or bodies of thermoplastic or elastomeric material)	-	200	5% discount for BIS
24.4(MECHANICAL STRENGTH For portable multiple and combined socket outlets: 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	200	5% discount for BIS
24.5(MECHANICAL STRENGTH For portable single socket-outlets: 1) with enclosures, covers or bodies of thermoplastic or elastomeric material)	-	200	5% discount for BIS
24.5(MECHANICAL STRENGTH For portable multiple and combined socket outlets: 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	200	5% discount for BIS
24.5(MECHANICAL STRENGTH For Plug 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	200	5% discount for BIS
24.6(MECHANICAL STRENGTH For screwed glands of accessories having an IP code higher than IP20)	-	200	5% discount for BIS
24.7(MECHANICAL STRENGTH For plug pins provided with insulating sleeves)	-	200	5% discount for BIS
24.8(MECHANICAL STRENGTH For shuttered socketoutlets)	-	200	5% discount for BIS
24.9(MECHANICAL STRENGTH For portable multiple and combined socket outlets (1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	200	5% discount for BIS
24.9(MECHANICAL STRENGTH For portable multiple and combined socket outlets (1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	200	5% discount for BIS
24.10(MECHANICAL STRENGTH For Plug (1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	200	5% discount for BIS
24.10(MECHANICAL STRENGTH For Plug (1) with enclosures, covers or bodies of thermoplastic or elastomeric material)	-	200	5% discount for BIS
24.11(MECHANICAL STRENGTH For portable socketoutlets having means for suspension on a wall)	-	200	5% discount for BIS
24.12(MECHANICAL STRENGTH For portable socketoutlets having means for suspension on a wall)	-	200	5% discount for BIS
24.13(MECHANICAL STRENGTH For portable socketoutlets having means for suspension on a wall)	-	200	5% discount for BIS
24.14.1(MECHANICAL STRENGTH For fixed socket-outlets)	-	200	5% discount for BIS
24.14.2(MECHANICAL STRENGTH For fixed socket-outlets)	-	200	5% discount for BIS
24.14.3(MECHANICAL STRENGTH For plugs and portable socketoutlets)	-	200	5% discount for BIS
24.15(MECHANICAL STRENGTH)	-	200	5% discount for BIS
24.16(MECHANICAL STRENGTH)	-	200	5% discount for BIS
24.16(MECHANICAL STRENGTH For shroud of portable socket-outlets)	-	200	5% discount for BIS
25.1(Resistance to heat)	-	200	5% discount for BIS
25.2(Resistance to heat)	-	200	5% discount for BIS
25.3(Resistance to heat)	-	200	5% discount for BIS
25.4(Resistance to heat)	-	200	5% discount for BIS
26.1(SCREWS, CURRENTCARRYING PARTS AND CONNECTIONS)	-	100	5% discount for BIS
26.2(SCREWS, CURRENTCARRYING PARTS AND CONNECTIONS)	-	100	5% discount for BIS
26.3(SCREWS, CURRENTCARRYING PARTS AND CONNECTIONS)	-	100	5% discount for BIS
26.4(SCREWS, CURRENTCARRYING PARTS AND CONNECTIONS)	-	100	5% discount for BIS
26.5(SCREWS, CURRENTCARRYING PARTS AND CONNECTIONS)	-	100	5% discount for BIS
26.6(SCREWS, CURRENTCARRYING PARTS AND CONNECTIONS)	-	100	5% discount for BIS
26.7(SCREWS, CURRENTCARRYING PARTS AND CONNECTIONS)	-	100	5% discount for BIS
27.1(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	50	5% discount for BIS
27.2(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	100	5% discount for BIS
27.3(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	100	5% discount for BIS
28.1.1(Glow-Wire Test)	-	200	5% discount for BIS
28.2(Resistance to Tracking)	-	200	5% discount for BIS
29(Resistance to Rusting)	-	200	5% discount for BIS
30.1(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Pressure Test at High Temperature)	-	200	5% discount for BIS
30.2(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Static Damp Heat Test)	-	200	5% discount for BIS
30.3(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Tests at Low Temperature)	-	200	5% discount for BIS
30.4(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Impact Test at Low Temperature)	-	200	5% discount for BIS

26 Sep, 2028

-
included w.e.f.01.11.2024

9364

BIS, Central Laboratory (CL)

None

IS 3854 (2023)

Switches for Domestic and Similar Purposes - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-6 (Rating)	-
Cl-7 (Classification)	-
Cl-8 (Marking)	-
Cl-9 (Checking of dimensions)	-
Cl-10.1, 10.2 (Prevention of Access to Live Parts)	-
Cl-10.3 (Requirements for Accessible Metal Parts)	-
Cl-10.4 (Requirements for Insulation of the Mechanism)	-
Cl. 10.5 (Requirements for Insulation of the Mechanism with Respect to the Surrounding Environment)	-
Cl-10.6 (Requirements for Switches Operated Indirectly)	-
Cl-10.7 (Requirements for Switches with Replaceable Pull Cord)	-
Cl-11 (Provision for earthing)	-
Cl-12 (Terminals)	-
Cl-13 (Constructional requirements)	-
Cl-14 (Mechanism)	-
Cl-15.1 (Resistance to Ageing)	-
Cl-15.2 (Protection Provided by Enclosures of Switches)	-
Cl-15.3 (Resistance to Humidity)	-
Cl-16.1 (General)	-
Cl-16.2 (Test for Measuring the Insulation Resistance)	-
Cl-16.3 (Electric Strength Test)	-
Cl-17 (Temperature rise)	-
Cl-18 (Making and breaking capacity)	-
Cl-20 (Mechanical strength)	-
Cl-21 (Resistance to heat)	-
Cl-22 (Screws, current carrying parts and connections)	-
Cl-23 (Creepage distances, clearances and distance through sealing compound)	-
Cl-24.1 (Resistance to abnormal heat and fire)	-
Cl-24.2 (Resistance to tracking)	-
Cl-25 (Resistance to rusting)	-
19.1 (Test for Switches Intended for Inductive Loads)	-
13.5 (Attachment of knobs)	-
12.3.11(Table 11) (Test Current for the Verification of Electrical and Thermal Stresses in Normal Use of Screwless Terminals)	-
12.3.12(Table 13) (Deflection Test Forces)	-
12.3.11(Table 11) (Test Current for the Verification of Electrical and Thermal Stresses in Normal Use of Screwless Terminals)	-

-
-

9365

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 10773 (1995)

Wrought copper tubes for refrigeration and air - Conditioning purposes - Specification (First Revision)

Copper tubes

19000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Freedom from defect)	-	100	For Hydrogen Embrittlement Test 5000/- Extra charges.
8(Dimension and Tolerance)	-	1800	For Hydrogen Embrittlement Test 5000/- Extra charges.
9.1 - 1(Copper)	-	700	For Hydrogen Embrittlement Test 5000/- Extra charges.
9.1 - 1(Arsenic)	-	700	For Hydrogen Embrittlement Test 5000/- Extra charges.
9.1 - 1(Iron)	-	700	For Hydrogen Embrittlement Test 5000/- Extra charges.
9.1 - 1(Lead)	-	700	For Hydrogen Embrittlement Test 5000/- Extra charges.
9.1 - 1(Nickel)	-	700	For Hydrogen Embrittlement Test 5000/- Extra charges.
9.1 - 1(Tin)	-	700	For Hydrogen Embrittlement Test 5000/- Extra charges.
9.1 - 1(Phosphorus)	-	700	For Hydrogen Embrittlement Test 5000/- Extra charges.
9.1 - 1(Total impurities)	-	700	For Hydrogen Embrittlement Test 5000/- Extra charges.
9.1 - 1(Manganese)	-	100	For Hydrogen Embrittlement Test 5000/- Extra charges.
9.1 - 1(Aluminium)	-	100	For Hydrogen Embrittlement Test 5000/- Extra charges.
9.1 - 1(Zinc)	-	100	For Hydrogen Embrittlement Test 5000/- Extra charges.
10.1.1 - 2(Tensile Test)	-	3000	For Hydrogen Embrittlement Test 5000/- Extra charges.
10.1.1 - 2(0.2 Proof stress)	-	2300	For Hydrogen Embrittlement Test 5000/- Extra charges.
10.1.1 - 2(Percentage elongation on 50mm gauge length)	-	500	For Hydrogen Embrittlement Test 5000/- Extra charges.
10.2(Flattening Test)	-	2000	For Hydrogen Embrittlement Test 5000/- Extra charges.
10.3(Drift Expanding Test)	-	2000	For Hydrogen Embrittlement Test 5000/- Extra charges.
10.4.2(Hydrostatic Test)	-	200	For Hydrogen Embrittlement Test 5000/- Extra charges.
10.4.3(Pneumatic Test)	-	200	For Hydrogen Embrittlement Test 5000/- Extra charges.
10.4.1(Eddy Current Test)	-	200	For Hydrogen Embrittlement Test 5000/- Extra charges.
10.5(Microscopic Examination)	-	200	For Hydrogen Embrittlement Test 5000/- Extra charges.
10.6(Hydrogen Embrittlement Test)	-	5000	For Hydrogen Embrittlement Test 5000/- Extra charges.
11.1(Residue Test Or cleanliness test)	-	1400	For Hydrogen Embrittlement Test 5000/- Extra charges.

31 Dec, 2029

-
-

9366

BIS, Central Laboratory (CL)

None

IS 12866 (2021)

Plastic Translucent Sheets made from Thermo-Setting Polyester Resin Glassfibre Reinforced - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.3 (Water absorption)	-
4 (PROFILES, DIMENSIONS AND TOLERANCES)	-
5 (WORKMANSHIP AND FINISH)	-

-
-

9367

DELHI TEST HOUSE, Azadhpur

8131406

IS 1865 (1991)

Iron castings with spheroidal or nodular graphite - Specification (Third Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12.1(Tensile Strength)	-	2500	TESTING CHARGES ;- RS.15000/-
12.2(Impact Test)	-	1500	TESTING CHARGES ;- RS.15000/-
13.1(Tensile Test)	-	2500	TESTING CHARGES ;- RS.15000/-
17(Marking)	-	500	TESTING CHARGES ;- RS.15000/-
13.2(Hardness Test)	-	1000	TESTING CHARGES ;- RS.15000/-
13.3(Impact Test)	-	1500	TESTING CHARGES ;- RS.15000/-
5(Manufacture)	-	5500	TESTING CHARGES ;- RS.15000/-

17 Jun, 2027

-
Included w.e.f.22.07.2025

9368

International Testing Centre, MSME Technology Development Centre, Meerut

8177804

IS 17043 : Part 1 (2024)

Shoes - Specification Part 1 Shoes for Services

38000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.2(Design)	-	300	-
Cl-4.3.1(Size)	-	300	-
Cl-4.3.2(Weight)	-	300	-
Cl-4.4(Height of Upper)	-	300	-
Cl-4.5, S.Cl-4.5.2(Ergonomic Feature)	-	500	-
Cl-4.5, S.Cl-4.5.3(Bond Strength)	-	500	-
Cl-4.5, S.Cl-4.5.4(Slip Resistance)	-	1500	-
Cl-4.5.5.1(Electrical Properties-Antistatic footwear)	-	800	-
Cl-4.5, S.Cl-4.5.6(Heat Insulation of Sole Complex)	-	500	-
Cl-4.5, S.Cl-4.5.7(Cold Insulation of Sole Complex)	-	1000	-
Cl-4.6.1(Material)	-	1500	-
Cl-4.6.2(Tear Strength)	-	500	-
Cl-4.6.3(Water Vapour Permeability and Coefficient)	-	1000	-
Cl-4.6.4(Water Penetration and Water Absorption)	-	1000	-
Cl-4.7.1(Material)	-	500	-
Cl-4.7.2(Tear Strength)	-	500	-
Cl-4.7.3(Abrasion Resistance)	-	1000	-
Cl-4.7.4(Water Vapour Permeability and Coefficient)	-	1000	-
Cl. 4.8.1(Material)	-	500	-
Cl-4.8.2(Abrasion Resistance)	-	500	-
Cl-4.8.3(Water Absorption and Desorption)	-	1000	-
Cl-4.9.3(Abrasion Resistance)	-	1000	-
Cl-4.10(Toe Puff and Counter Stiffener)	-	800	-
Cl-4.11.1(Material)	-	500	-
Cl-4.11.2(Tear Strength)	-	500	-
Cl-4.12(Closing Thread)	-	500	-
Cl-4.13.2(Thickness)	-	300	-
Cl-4.13.3(Moulded Density)	-	300	-
Cl-4.13.4(Hardness)	-	500	-
Cl-4.13.5(Ageing Test)	-	1500	-
Cl-4.13.6(Tear Strength)	-	500	-
Cl-4.13.7(Abrasion Resistance)	-	500	-
Cl-4.13.8(Flexing Resistance)	-	1000	-
Cl-4.14(Eyelet)	-	500	-
Cl-4.15.2(Breaking Load and Tag Retention)	-	1000	-
Cl-5(Chemical Requirements)	-	25000	-
Cl-7(Marking)	-	300	-
Cl.4.5.8(Energy Absorption of Seat Region)	-	1500	-
Cl- 4.5.3.1(Upper-outsole bond strength)	-	500	-
Cl.4.5.3.2(Interlayer bond strength)	-	500	-
Cl-4.9.1(Material)	-	500	-
Cl-4.9.2(Water Absorption and Desorption)	-	1000	-
Cl-4.13.1(Material)	-	500	-
Cl-4.15.1(Material)	-	500	-
Cl-5, Table 1 of IS 17011 (i)(Allergenic and carcinogenic disperse dyes)	-	3000	-
Cl-5, Table no 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	3000	-
Cl-5, Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	3000	-
Cl-5, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	800	-
Cl-5, Table no 1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	2000	-
Cl-5, Table no 1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	1000	-
Cl-5, Table no 1 of IS 17011 (vii)(Formaldehyde)	-	1000	-
Cl-5, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	3500	-
Cl-5, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	3000	-
Cl-5, Table no 1 of IS 17011 (x)(pH)	-	500	-
Cl-5, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	4500	-
Cl-5, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	2000	-
4.9 Insocks(Insock thickness)	-	300	-
Cl-4.2(Design)	-	300	-
Cl-4.3.1(Size)	-	300	-
Cl-4.3.2(Weight)	-	300	-
Cl-4.4(Height of Upper)	-	300	-
Cl-4.5, S.Cl-4.5.2(Ergonomic Feature)	-	500	-
Cl-4.5, S.Cl-4.5.3(Bond Strength)	-	500	-
Cl-4.5, S.Cl-4.5.4(Slip Resistance)	-	1500	-
Cl-4.5.5.1(Electrical Properties-Antistatic footwear)	-	800	-
Cl-4.5, S.Cl-4.5.6(Heat Insulation of Sole Complex)	-	500	-
Cl-4.5, S.Cl-4.5.7(Cold Insulation of Sole Complex)	-	500	-
Cl-4.6.1(Material)	-	500	-
Cl-4.6.2(Tear Strength)	-	500	-
Cl-4.6.3(Water Vapour Permeability and Coefficient)	-	1000	-
Cl-4.6.4(Water Penetration and Water Absorption)	-	1000	-
Cl-4.7.1(Material)	-	500	-
Cl-4.7.2(Tear Strength)	-	500	-
Cl-4.7.3(Abrasion Resistance)	-	800	-
Cl-4.7.4(Water Vapour Permeability and Coefficient)	-	1000	-
Cl. 4.8.1(Material)	-	500	-
Cl-4.8.2(Abrasion Resistance)	-	800	-
Cl-4.8.3(Water Absorption and Desorption)	-	1000	-
Cl-4.9.3(Abrasion Resistance)	-	1000	-
Cl-4.10(Toe Puff and Counter Stiffener)	-	500	-
Cl-4.11.1(Material)	-	500	-
Cl-4.11.2(Tear Strength)	-	500	-
Cl-4.12(Closing Thread)	-	500	-
Cl-4.13.2(Thickness)	-	300	-
Cl-4.13.3(Moulded Density)	-	300	-
Cl-4.13.4(Hardness)	-	500	-
Cl-4.13.5(Ageing Test)	-	1500	-
Cl-4.13.6(Tear Strength)	-	500	-
Cl-4.13.7(Abrasion Resistance)	-	800	-
Cl-4.13.8(Flexing Resistance)	-	800	-
Cl-4.14(Eyelet)	-	500	-
Cl-4.15.2(Breaking Load and Tag Retention)	-	500	-
Cl-5(Chemical Requirements)	-	25000	-
Cl-7(Marking)	-	300	-
Cl.4.5.8(Energy Absorption of Seat Region)	-	1000	-
Cl- 4.5.3.1(Upper-outsole bond strength)	-	500	-
Cl.4.5.3.2(Interlayer bond strength)	-	500	-
Cl-4.9.1(Material)	-	500	-
Cl-4.9.2(Water Absorption and Desorption)	-	1000	-
Cl-4.13.1(Material)	-	500	-
Cl-4.15.1(Material)	-	500	-
Cl-5, Table 1 of IS 17011 (i)(Allergenic and carcinogenic disperse dyes)	-	3000	-
Cl-5, Table no 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	3000	-
Cl-5, Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	3000	-
Cl-5, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	1000	-
Cl-5, Table no 1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	2000	-
Cl-5, Table no 1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	1000	-
Cl-5, Table no 1 of IS 17011 (vii)(Formaldehyde)	-	1000	-
Cl-5, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	4500	-
Cl-5, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	3500	-
Cl-5, Table no 1 of IS 17011 (x)(pH)	-	500	-
Cl-5, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	4500	-
Cl-5, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	2000	-
4.9 Insocks(Insock thickness)	-	300	-

15 Apr, 2027

-
Included w.e.f 19.09.2024

9369

FHHL PRIVATE LIMITED, PUNE

7124016

IS 13428 (2024)

PACKAGED NATURAL MINERAL WATER - SPECIFICATION Third Revision

15200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1.1(Escherichia coli)	-	200	-
6.1.2(Coliform)	-	200	-
6.1.3(Faecal Streptococci)	-	200	-
6.1.4(Sulphite Reducing Anaerobe)	-	200	-
6.1.5(Pseudomonas aeruginosa)	-	200	-
6.1.6(Yeast and moould)	-	200	-
6.1.7(Salmonella)	-	200	-
6.1.8(Vibrio Cholera)	-	200	-
6.2/Table 1/i(Colour)	-	100	-
6.2/Table 1/ii(Odour)	-	100	-
6.2/Table 1/iii(Taste)	-	100	-
6.2/Table 1/iv(Turbidity)	-	100	-
6.2/Table 1/v(Total Dissoved)	-	200	-
6.2/Table 1/vi(pH Value)	-	100	-
6.2/Table 2/i(Nitrate)	-	200	-
6.2/Table 2/ii(Nitrite)	-	200	-
6.2/Table 2/iii(Sulphide)	-	200	-
6.2/Table 2/iv(Manganese)	-	300	-
6.2/Table 2/v(Copper)	-	300	-
6.2/Table 2/vi(Fluoride)	-	300	-
6.2/Table 2/vii(Barium)	-	300	-
6.2/Table 2/viii(Antimony)	-	300	-
6.2/Table 2/ix(Borate)	-	300	-
6.2/Table 2/x(Silver)	-	300	-
6.2/Table 2/xi(Chloride)	-	200	-
6.2/Table 2/xii(Sulphate)	-	200	-
6.2/Table 2/xiii(Magnesium)	-	200	-
6.2/Table 2/xiv(Calcium)	-	200	-
6.2/Table 2/xv(Sodium)	-	300	-
6.2/Table 2/xvi(Alkalinity)	-	200	-
6.2/Table 2/xvii(Selenium)	-	300	-
6.2/Table 2/xviii(Mineral Oil)	-	300	-
6.2/Table 2/xix(Phenolic Compounds)	-	200	-
6.2/Table 2/xx(Anionic Surface active agents)	-	200	-
6.2/Table 3/i(Arsenic)	-	300	-
6.2/Table 3/ii(Cadmium)	-	300	-
6.2/Table 3/iii(Cyanide)	-	300	-
6.2/Table 3/iv(Chromium)	-	300	-
6.2/Table 3/v(Mercury)	-	300	-
6.2/Table 3/vi(Lead)	-	300	-
6.2/Table 3/vii(Nickel)	-	300	-
6.2/Table 3/viii(Polychlorinated biphenyle (PCB))	-	300	-
6.2/Table 3/ix(Polynuclear aromatic hydrocarbons)	-	300	-
6.2/Table 3/x(Uranium)	-	1700	-
Cl- 6.3, Annex N (i)(P,P -DDE)	-	100	-
Cl- 6.3, Annex N (i)(O,P -DDE)	-	100	-
Cl- 6.3, Annex N (i)(P,P- DDT)	-	100	-
Cl- 6.3, Annex N (i)(O,P -DDT)	-	100	-
Cl-6.3, Annex N (i)(P,P- DDD)	-	100	-
Cl-6.3, Annex N (i)(O,P-DDD)	-	100	-
Cl- 6.3, Annex N (ii)(γ-HCH (lindane))	-	100	-
Cl- 6.3, Annex N (iii)(α-HCH)	-	100	-
Cl- 6.3, Annex N (iii)(β-HCH)	-	100	-
Cl- 6.3, Annex N (iii)(δ - HCH)	-	100	-
Cl- 6.3, Annex N (iv)(Endosulfan - α)	-	100	-
Cl- 6.3, Annex N (iv)(Endosulfan - β)	-	100	-
Cl- 6.3, Annex N (iv)(Endosulfan - sulphate)	-	100	-
Cl- 6.3, Annex N (v)(Monocrotophos)	-	100	-
Cl- 6.3, Annex N (vi)(Ethion)	-	100	-
Cl- 6.3, Annex N (vii)(Chlorpyrifos)	-	100	-
Cl- 6.3, Annex N (viii)(Phorate and its oxygen analogue)	-	100	-
Cl- 6.3, Annex N (viii)(phorate sulphoxide)	-	50	-
Cl- 6.3, Annex N (viii)(phorate sulphone)	-	50	-
Cl- 6.3, Annex N (ix)(2,4-D)	-	150	-
Cl- 6.3, Annex N (x)(Butachlor)	-	100	-
Cl- 6.3, Annex N (xi)(Isoproturon)	-	150	-
Cl- 6.3, Annex N (xii)(Alachlor)	-	100	-
Cl- 6.3, Annex N (xiii)(Atrazine)	-	100	-
Cl- 6.3, Annex N (xiv)(Methyl parathion)	-	100	-
Cl- 6.3, Annex N (xiv)(Methyl paraoxon)	-	100	-
Cl- 6.3, Annex N (xv)(Malathion)	-	50	-
Cl- 6.3, Annex N (xv)(malaoxon)	-	50	-
Cl- 6.3, Annex N (xvi)(Aldrin)	-	100	-
6.2/Table 4/i(Alpha emitters, Bq/l, Max)	-	0	-
6.2/Table 4/ii(Beta emitters, Bq/l, Max)	-	0	-
Cl-6.1.3(Staphylococcus aureus)	-	200	-
Cl-6.1.7(Shigella)	-	200	-
Cl-6.1.8(V. parahaemolyticus)	-	200	-
Cl-6.3, Annex N (XVI)(Dieldrin)	-	100	-
6.1.1(Escherichia coli)	-	0	-
6.1.2(Coliform)	-	0	-
6.1.3(Faecal Streptococci)	-	0	-
6.1.4(Sulphite Reducing Anaerobe)	-	0	-
6.1.5(Pseudomonas aeruginosa)	-	0	-
6.1.6(Yeast and moould)	-	0	-
6.1.7(Salmonella)	-	0	-
6.1.8(Vibrio Cholera)	-	0	-
6.2/Table 1/i(Colour)	-	0	-
6.2/Table 1/ii(Odour)	-	0	-
6.2/Table 1/iii(Taste)	-	0	-
6.2/Table 1/iv(Turbidity)	-	0	-
6.2/Table 1/v(Total Dissoved)	-	0	-
6.2/Table 1/vi(pH Value)	-	0	-
6.2/Table 2/i(Nitrate)	-	0	-
6.2/Table 2/ii(Nitrite)	-	0	-
6.2/Table 2/iii(Sulphide)	-	0	-
6.2/Table 2/iv(Manganese)	-	0	-
6.2/Table 2/v(Copper)	-	0	-
6.2/Table 2/vi(Fluoride)	-	0	-
6.2/Table 2/vii(Barium)	-	0	-
6.2/Table 2/viii(Antimony)	-	0	-
6.2/Table 2/ix(Borate)	-	0	-
6.2/Table 2/x(Silver)	-	0	-
6.2/Table 2/xi(Chloride)	-	0	-
6.2/Table 2/xii(Sulphate)	-	0	-
6.2/Table 2/xiii(Magnesium)	-	0	-
6.2/Table 2/xiv(Calcium)	-	0	-
6.2/Table 2/xv(Sodium)	-	0	-
6.2/Table 2/xvi(Alkalinity)	-	0	-
6.2/Table 2/xvii(Selenium)	-	0	-
6.2/Table 2/xviii(Mineral Oil)	-	0	-
6.2/Table 2/xix(Phenolic Compounds)	-	0	-
6.2/Table 2/xx(Anionic Surface active agents)	-	0	-
6.2/Table 3/i(Arsenic)	-	0	-
6.2/Table 3/ii(Cadmium)	-	0	-
6.2/Table 3/iii(Cyanide)	-	0	-
6.2/Table 3/iv(Chromium)	-	0	-
6.2/Table 3/v(Mercury)	-	0	-
6.2/Table 3/vi(Lead)	-	0	-
6.2/Table 3/vii(Nickel)	-	0	-
6.2/Table 3/viii(Polychlorinated biphenyle (PCB))	-	0	-
6.2/Table 3/ix(Polynuclear aromatic hydrocarbons)	-	0	-
6.2/Table 3/x(Uranium)	-	0	-
Cl- 6.3, Annex N (i)(P,P -DDE)	-	0	-
Cl- 6.3, Annex N (i)(O,P -DDE)	-	0	-
Cl- 6.3, Annex N (i)(P,P- DDT)	-	0	-
Cl- 6.3, Annex N (i)(O,P -DDT)	-	0	-
Cl-6.3, Annex N (i)(P,P- DDD)	-	0	-
Cl-6.3, Annex N (i)(O,P-DDD)	-	0	-
Cl- 6.3, Annex N (ii)(γ-HCH (lindane))	-	0	-
Cl- 6.3, Annex N (iii)(α-HCH)	-	0	-
Cl- 6.3, Annex N (iii)(β-HCH)	-	0	-
Cl- 6.3, Annex N (iii)(δ - HCH)	-	0	-
Cl- 6.3, Annex N (iv)(Endosulfan - α)	-	0	-
Cl- 6.3, Annex N (iv)(Endosulfan - β)	-	0	-
Cl- 6.3, Annex N (iv)(Endosulfan - sulphate)	-	0	-
Cl- 6.3, Annex N (v)(Monocrotophos)	-	0	-
Cl- 6.3, Annex N (vi)(Ethion)	-	0	-
Cl- 6.3, Annex N (vii)(Chlorpyrifos)	-	0	-
Cl- 6.3, Annex N (viii)(Phorate and its oxygen analogue)	-	0	-
Cl- 6.3, Annex N (viii)(phorate sulphoxide)	-	0	-
Cl- 6.3, Annex N (viii)(phorate sulphone)	-	0	-
Cl- 6.3, Annex N (ix)(2,4-D)	-	0	-
Cl- 6.3, Annex N (x)(Butachlor)	-	0	-
Cl- 6.3, Annex N (xi)(Isoproturon)	-	0	-
Cl- 6.3, Annex N (xii)(Alachlor)	-	0	-
Cl- 6.3, Annex N (xiii)(Atrazine)	-	0	-
Cl- 6.3, Annex N (xiv)(Methyl parathion)	-	0	-
Cl- 6.3, Annex N (xiv)(Methyl paraoxon)	-	0	-
Cl- 6.3, Annex N (xv)(Malathion)	-	0	-
Cl- 6.3, Annex N (xv)(malaoxon)	-	0	-
Cl- 6.3, Annex N (xvi)(Aldrin)	-	0	-
6.2/Table 4/i(Alpha emitters, Bq/l, Max)	-	0	-
6.2/Table 4/ii(Beta emitters, Bq/l, Max)	-	0	-
Cl-6.1.3(Staphylococcus aureus)	-	0	-
Cl-6.1.7(Shigella)	-	0	-
Cl-6.1.8(V. parahaemolyticus)	-	0	-
Cl-6.3, Annex N (XVI)(Dieldrin)	-	0	-
6.1.1(Escherichia coli)	-	0	-
6.1.2(Coliform)	-	0	-
6.1.3(Faecal Streptococci)	-	0	-
6.1.4(Sulphite Reducing Anaerobe)	-	0	-
6.1.5(Pseudomonas aeruginosa)	-	0	-
6.1.6(Yeast and moould)	-	0	-
6.1.7(Salmonella)	-	0	-
6.1.8(Vibrio Cholera)	-	0	-
6.2/Table 1/i(Colour)	-	0	-
6.2/Table 1/ii(Odour)	-	0	-
6.2/Table 1/iii(Taste)	-	0	-
6.2/Table 1/iv(Turbidity)	-	0	-
6.2/Table 1/v(Total Dissoved)	-	0	-
6.2/Table 1/vi(pH Value)	-	0	-
6.2/Table 2/i(Nitrate)	-	0	-
6.2/Table 2/ii(Nitrite)	-	0	-
6.2/Table 2/iii(Sulphide)	-	0	-
6.2/Table 2/iv(Manganese)	-	0	-
6.2/Table 2/v(Copper)	-	0	-
6.2/Table 2/vi(Fluoride)	-	0	-
6.2/Table 2/vii(Barium)	-	0	-
6.2/Table 2/viii(Antimony)	-	0	-
6.2/Table 2/ix(Borate)	-	0	-
6.2/Table 2/x(Silver)	-	0	-
6.2/Table 2/xi(Chloride)	-	0	-
6.2/Table 2/xii(Sulphate)	-	0	-
6.2/Table 2/xiii(Magnesium)	-	0	-
6.2/Table 2/xiv(Calcium)	-	0	-
6.2/Table 2/xv(Sodium)	-	0	-
6.2/Table 2/xvi(Alkalinity)	-	0	-
6.2/Table 2/xvii(Selenium)	-	0	-
6.2/Table 2/xviii(Mineral Oil)	-	0	-
6.2/Table 2/xix(Phenolic Compounds)	-	0	-
6.2/Table 2/xx(Anionic Surface active agents)	-	0	-
6.2/Table 3/i(Arsenic)	-	0	-
6.2/Table 3/ii(Cadmium)	-	0	-
6.2/Table 3/iii(Cyanide)	-	0	-
6.2/Table 3/iv(Chromium)	-	0	-
6.2/Table 3/v(Mercury)	-	0	-
6.2/Table 3/vi(Lead)	-	0	-
6.2/Table 3/vii(Nickel)	-	0	-
6.2/Table 3/viii(Polychlorinated biphenyle (PCB))	-	0	-
6.2/Table 3/ix(Polynuclear aromatic hydrocarbons)	-	0	-
6.2/Table 3/x(Uranium)	-	0	-
Cl- 6.3, Annex N (i)(P,P -DDE)	-	0	-
Cl- 6.3, Annex N (i)(O,P -DDE)	-	0	-
Cl- 6.3, Annex N (i)(P,P- DDT)	-	0	-
Cl- 6.3, Annex N (i)(O,P -DDT)	-	0	-
Cl-6.3, Annex N (i)(P,P- DDD)	-	0	-
Cl-6.3, Annex N (i)(O,P-DDD)	-	0	-
Cl- 6.3, Annex N (ii)(γ-HCH (lindane))	-	0	-
Cl- 6.3, Annex N (iii)(α-HCH)	-	0	-
Cl- 6.3, Annex N (iii)(β-HCH)	-	0	-
Cl- 6.3, Annex N (iii)(δ - HCH)	-	0	-
Cl- 6.3, Annex N (iv)(Endosulfan - α)	-	0	-
Cl- 6.3, Annex N (iv)(Endosulfan - β)	-	0	-
Cl- 6.3, Annex N (iv)(Endosulfan - sulphate)	-	0	-
Cl- 6.3, Annex N (v)(Monocrotophos)	-	0	-
Cl- 6.3, Annex N (vi)(Ethion)	-	0	-
Cl- 6.3, Annex N (vii)(Chlorpyrifos)	-	0	-
Cl- 6.3, Annex N (viii)(Phorate and its oxygen analogue)	-	0	-
Cl- 6.3, Annex N (viii)(phorate sulphoxide)	-	0	-
Cl- 6.3, Annex N (viii)(phorate sulphone)	-	0	-
Cl- 6.3, Annex N (ix)(2,4-D)	-	0	-
Cl- 6.3, Annex N (x)(Butachlor)	-	0	-
Cl- 6.3, Annex N (xi)(Isoproturon)	-	0	-
Cl- 6.3, Annex N (xii)(Alachlor)	-	0	-
Cl- 6.3, Annex N (xiii)(Atrazine)	-	0	-
Cl- 6.3, Annex N (xiv)(Methyl parathion)	-	0	-
Cl- 6.3, Annex N (xiv)(Methyl paraoxon)	-	0	-
Cl- 6.3, Annex N (xv)(Malathion)	-	0	-
Cl- 6.3, Annex N (xv)(malaoxon)	-	0	-
Cl- 6.3, Annex N (xvi)(Aldrin)	-	0	-
6.2/Table 4/i(Alpha emitters, Bq/l, Max)	-	0	-
6.2/Table 4/ii(Beta emitters, Bq/l, Max)	-	0	-
Cl-6.1.3(Staphylococcus aureus)	-	0	-
Cl-6.1.7(Shigella)	-	0	-
Cl-6.1.8(V. parahaemolyticus)	-	0	-
Cl-6.3, Annex N (XVI)(Dieldrin)	-	0	-
6.1.1(Escherichia coli)	-	0	-
6.1.2(Coliform)	-	0	-
6.1.3(Faecal Streptococci)	-	0	-
6.1.4(Sulphite Reducing Anaerobe)	-	0	-
6.1.5(Pseudomonas aeruginosa)	-	0	-
6.1.6(Yeast and moould)	-	0	-
6.1.7(Salmonella)	-	0	-
6.1.8(Vibrio Cholera)	-	0	-
6.2/Table 1/i(Colour)	-	0	-
6.2/Table 1/ii(Odour)	-	0	-
6.2/Table 1/iii(Taste)	-	0	-
6.2/Table 1/iv(Turbidity)	-	0	-
6.2/Table 1/v(Total Dissoved)	-	0	-
6.2/Table 1/vi(pH Value)	-	0	-
6.2/Table 2/i(Nitrate)	-	0	-
6.2/Table 2/ii(Nitrite)	-	0	-
6.2/Table 2/iii(Sulphide)	-	0	-
6.2/Table 2/iv(Manganese)	-	0	-
6.2/Table 2/v(Copper)	-	0	-
6.2/Table 2/vi(Fluoride)	-	0	-
6.2/Table 2/vii(Barium)	-	0	-
6.2/Table 2/viii(Antimony)	-	0	-
6.2/Table 2/ix(Borate)	-	0	-
6.2/Table 2/x(Silver)	-	0	-
6.2/Table 2/xi(Chloride)	-	0	-
6.2/Table 2/xii(Sulphate)	-	0	-
6.2/Table 2/xiii(Magnesium)	-	0	-
6.2/Table 2/xiv(Calcium)	-	0	-
6.2/Table 2/xv(Sodium)	-	0	-
6.2/Table 2/xvi(Alkalinity)	-	0	-
6.2/Table 2/xvii(Selenium)	-	0	-
6.2/Table 2/xviii(Mineral Oil)	-	0	-
6.2/Table 2/xix(Phenolic Compounds)	-	0	-
6.2/Table 2/xx(Anionic Surface active agents)	-	0	-
6.2/Table 3/i(Arsenic)	-	0	-
6.2/Table 3/ii(Cadmium)	-	0	-
6.2/Table 3/iii(Cyanide)	-	0	-
6.2/Table 3/iv(Chromium)	-	0	-
6.2/Table 3/v(Mercury)	-	0	-
6.2/Table 3/vi(Lead)	-	0	-
6.2/Table 3/vii(Nickel)	-	0	-
6.2/Table 3/viii(Polychlorinated biphenyle (PCB))	-	0	-
6.2/Table 3/ix(Polynuclear aromatic hydrocarbons)	-	0	-
6.2/Table 3/x(Uranium)	-	0	-
Cl- 6.3, Annex N (i)(P,P -DDE)	-	0	-
Cl- 6.3, Annex N (i)(O,P -DDE)	-	0	-
Cl- 6.3, Annex N (i)(P,P- DDT)	-	0	-
Cl- 6.3, Annex N (i)(O,P -DDT)	-	0	-
Cl-6.3, Annex N (i)(P,P- DDD)	-	0	-
Cl-6.3, Annex N (i)(O,P-DDD)	-	0	-
Cl- 6.3, Annex N (ii)(γ-HCH (lindane))	-	0	-
Cl- 6.3, Annex N (iii)(α-HCH)	-	0	-
Cl- 6.3, Annex N (iii)(β-HCH)	-	0	-
Cl- 6.3, Annex N (iii)(δ - HCH)	-	0	-
Cl- 6.3, Annex N (iv)(Endosulfan - α)	-	0	-
Cl- 6.3, Annex N (iv)(Endosulfan - β)	-	0	-
Cl- 6.3, Annex N (iv)(Endosulfan - sulphate)	-	0	-
Cl- 6.3, Annex N (v)(Monocrotophos)	-	0	-
Cl- 6.3, Annex N (vi)(Ethion)	-	0	-
Cl- 6.3, Annex N (vii)(Chlorpyrifos)	-	0	-
Cl- 6.3, Annex N (viii)(Phorate and its oxygen analogue)	-	0	-
Cl- 6.3, Annex N (viii)(phorate sulphoxide)	-	0	-
Cl- 6.3, Annex N (viii)(phorate sulphone)	-	0	-
Cl- 6.3, Annex N (ix)(2,4-D)	-	0	-
Cl- 6.3, Annex N (x)(Butachlor)	-	0	-
Cl- 6.3, Annex N (xi)(Isoproturon)	-	0	-
Cl- 6.3, Annex N (xii)(Alachlor)	-	0	-
Cl- 6.3, Annex N (xiii)(Atrazine)	-	0	-
Cl- 6.3, Annex N (xiv)(Methyl parathion)	-	0	-
Cl- 6.3, Annex N (xiv)(Methyl paraoxon)	-	0	-
Cl- 6.3, Annex N (xv)(Malathion)	-	0	-
Cl- 6.3, Annex N (xv)(malaoxon)	-	0	-
Cl- 6.3, Annex N (xvi)(Aldrin)	-	0	-
6.2/Table 4/i(Alpha emitters, Bq/l, Max)	-	0	-
6.2/Table 4/ii(Beta emitters, Bq/l, Max)	-	0	-
Cl-6.1.3(Staphylococcus aureus)	-	0	-
Cl-6.1.7(Shigella)	-	0	-
Cl-6.1.8(V. parahaemolyticus)	-	0	-
Cl-6.3, Annex N (XVI)(Dieldrin)	-	0	-

31 Dec, 2026

-
Included w.e.f. 26.09.2024 Exclusion: Cl.6.2 Table-4 (i) Alpha Emitters, Cl.6.2 Table-4 (ii) Beta Emitters

9370

Bharat Test House Pvt Ltd 781 Sonipat Haryana

9137826

IS 302 : Part 2 : Sec 46 (1993)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 46 electric steam cookers

Electric Steam Cookers

27500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General)	-	0	-
5(Rating)	-	100	-
6(Classification)	-	100	-
7(Marking)	-	100	-
8("8 PROTECTION AGAINST ELECTRIC SHOCK ")	-	500	-
9("STARTING OF MOTOR-OPERATING APPLIANCES ")	-	0	-
10(INPUT AND CURRENT)	-	1000	-
11(TEMPERATURE RISE)	-	1500	-
12("OPERATION UNDER OVERLOAD CONDITIONS OF APPLIANCES WITH HEATING ELEMENTS")	-	1000	-
13(" ELECTRICAL INSULATION AND LEKAGE CURRENT AT OPERATING TEMPERATURE ")	-	800	-
14("RADIO AND TELEVISION INTERFERENCE SUPPRESSION")	-	2000	-
15(MOISTURE RESISTANCE)	-	4000	-
16("INSULATION RESlSTANCE AND specified in 16.2. ELECTRIC SHOCK STRENGTH ( AFTER HUMIDITY TREATMENT )")	-	800	-
17(OVERLOAD PROTECTION)	-	1500	-
19(ABNORMAL OPERATION)	-	2000	-
20("STABILITY AND MECHANICAL HAZARDS")	-	500	-
21(MECHANICAL STRENGTH)	-	1000	-
21(MECHANICAL STRENGTH)	-	1000	-
22(CONSTRUCTION)	-	2000	-
22(CONSTRUCTION)	-	2000	-
23(INTERNAL WIRING)	-	500	-
24(COMPONENTS)	-	0	-
25("SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS ")	-	1000	-
26("TERMINALS FOR EXTERNAL CONDUCTORS")	-	500	-
27(PROVISION FOR EARTHING)	-	1000	-
28(SCREWS AND CONNECTIONS)	-	600	-
30("RESISTANCE TO HEAT, FIRE AND TRACKING ")	-	2000	-
31(RESISTANCE TO RUSTING)	-	1000	-
31(RESISTANCE TO RUSTING)	-	1000	-
32(RADIATION HAZARDS)	-	500	-
4(General)	-	0	-
5(Rating)	-	0	-
6(Classification)	-	0	-
7(Marking)	-	0	-
8("8 PROTECTION AGAINST ELECTRIC SHOCK ")	-	0	-
9("STARTING OF MOTOR-OPERATING APPLIANCES ")	-	0	-
10(INPUT AND CURRENT)	-	0	-
11(TEMPERATURE RISE)	-	0	-
12("OPERATION UNDER OVERLOAD CONDITIONS OF APPLIANCES WITH HEATING ELEMENTS")	-	0	-
13(" ELECTRICAL INSULATION AND LEKAGE CURRENT AT OPERATING TEMPERATURE ")	-	0	-
14("RADIO AND TELEVISION INTERFERENCE SUPPRESSION")	-	0	-
15(MOISTURE RESISTANCE)	-	0	-
16("INSULATION RESlSTANCE AND specified in 16.2. ELECTRIC SHOCK STRENGTH ( AFTER HUMIDITY TREATMENT )")	-	0	-
17(OVERLOAD PROTECTION)	-	0	-
19(ABNORMAL OPERATION)	-	0	-
20("STABILITY AND MECHANICAL HAZARDS")	-	0	-
21(MECHANICAL STRENGTH)	-	0	-
21(MECHANICAL STRENGTH)	-	0	-
22(CONSTRUCTION)	-	0	-
22(CONSTRUCTION)	-	0	-
23(INTERNAL WIRING)	-	0	-
24(COMPONENTS)	-	0	-
25("SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS ")	-	0	-
26("TERMINALS FOR EXTERNAL CONDUCTORS")	-	0	-
27(PROVISION FOR EARTHING)	-	0	-
28(SCREWS AND CONNECTIONS)	-	0	-
30("RESISTANCE TO HEAT, FIRE AND TRACKING ")	-	0	-
31(RESISTANCE TO RUSTING)	-	0	-
31(RESISTANCE TO RUSTING)	-	0	-
32(RADIATION HAZARDS)	-	0	-
20("STABILITY AND MECHANICAL HAZARDS")	-	0	-
21(MECHANICAL STRENGTH)	-	0	-
22(CONSTRUCTION)	-	0	-
23(INTERNAL WIRING)	-	0	-
24(COMPONENTS)	-	0	-
25("SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS ")	-	0	-
26("TERMINALS FOR EXTERNAL CONDUCTORS")	-	0	-
27(PROVISION FOR EARTHING)	-	0	-
28(SCREWS AND CONNECTIONS)	-	0	-
30("RESISTANCE TO HEAT, FIRE AND TRACKING ")	-	0	-
31(RESISTANCE TO RUSTING)	-	0	-
32(RADIATION HAZARDS)	-	0	-

31 Dec, 2029

-
Included.w.e.f.13.11.2024. Exclusion : 19.11.4.1 to 19.11.4.7 (EMI/EMC)

9371

BIS, Southern Regional Laboratory (SRL)

None

IS 7933 (2022)

Specification for Flexible Polyurethane Foam for Domestic Mattresses First Revision

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.8, Table 1, i) (Density,)	-
5.4 (Dimensions and Tolerances)	-

-
-

9372

BIS, Southern Regional Laboratory (SRL)

None

IS 3748 (2022)

Tool Steels - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
11.1 (Product diameter or thickness ≥ 15 mm)	-
7.2 (Chemical Composition)	-
7.2 (Carbon)	-
As per Clause 7.2, Table 2 to 9 (Silicon)	-
As per Clause 7.2, Table 2 to 9 (Manganese)	-
As per Clause 7.2, Table 2 to 9 (Chromium)	-
As per Clause 7.2, Table 2 to 9 (Sulphur)	-
As per Clause 7.2, Table 2 to 9 (phosphorus)	-
As per Clause 7.2, Table 2 to 9 (Cobalt)	-
As per Clause 7.2, Table 2 to 9 (Molybdenum)	-
As per Clause 7.2, Table 2 to 9 (vanadium)	-
As per Clause 7.2, Table 2 to 9 (Tunsten)	-
As per Clause 7.2, Table 2 to 9 (Nickel)	-
As per Clause 7.2, Table 2 to 9 (Nitrogen)	-

-
-

9373

TAG Corporation, Chennai

6138806

IS 398 : Part 6 (2021)

Aluminium Conductors For Overhead Transmission Purposes Part 6: High conductivity aluminium alloy stranded conductors

High conductivity aluminium alloy stranded conductors

286635 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
16.2(Visual Examination)	-	1200	test charges per sample of conductor
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	5200	Test charges per conductor inclusive of all layers
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	5200	Test charges per conductor inclusive of all layers
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	5200	Test charges per conductor inclusive of all layers
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	5200	Test charges per conductor inclusive of all layers
16.4, Table 2(Measurement of Diameter of Individual Aluminium Alloy Wires)	-	360	test charges per individual strand
16.5, Table 2(Breaking Load Test - before stranding)	-	360	test charges per individual strand
16.5, Table 2(Breaking Load Test - after stranding)	-	360	test charges per individual strand
16.6, Table 1(Elongation Test - before stranding)	-	690	test charges per individual strand
16.6, Table 1(Elongation Test - after stranding)	-	690	test charges per individual strand
16.7, Table 2(Resistivity Test)	-	920	test charges per individual strand
16.8(Wrapping Test)	-	575	test charges per individual strand
11(Stranding)	-	5200	Test charges per conductor inclusive of all layers
8(Freedom from defects)	-	1200	test charges per sample of conductor
16.9, Table 3(Ultimate Tensile Strength on Stranded Conductor)	-	28800	test charges per sample of conductor
16.10, Table 3(d.c. Resistance Test on Stranded Conductor)	-	9200	test charges per sample of conductor
16.11(Stress-strain Test)	-	44900	test charges per sample of conductor
16.2(Visual Examination)	-	-	-
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	-	-
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	-	-
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	-	-
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	-	-
16.4, Table 2(Measurement of Diameter of Individual Aluminium Alloy Wires)	-	-	-
16.5, Table 2(Breaking Load Test - before stranding)	-	-	-
16.5, Table 2(Breaking Load Test - after stranding)	-	-	-
16.6, Table 1(Elongation Test - before stranding)	-	-	-
16.6, Table 1(Elongation Test - after stranding)	-	-	-
16.7, Table 2(Resistivity Test)	-	-	-
16.8(Wrapping Test)	-	-	-
11(Stranding)	-	-	-
8(Freedom from defects)	-	-	-
16.9, Table 3(Ultimate Tensile Strength on Stranded Conductor)	-	-	-
16.10, Table 3(d.c. Resistance Test on Stranded Conductor)	-	-	-
16.11(Stress-strain Test)	-	-	-

10 Jan, 2027

-
Included w.e.f 03.01.2025

9374

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 4386 (2022)

SPECIFICATION FOR PUTTING SHOTS Second Revision

WU18, WU20/SW, BU18, BU20, SM

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.2(Types)	-	8000	-
Cl.3.1(Material)	-	8000	-
Cl.3.2(Weight and Diameter)	-	8000	-
Cl.4(Manufacture, Workmanship and Finish)	-	8000	-
Cl.5(Test for Center of Gravity)	-	8000	-

31 Dec, 2029

-
Included w.e.f. 03.10.2024

9375

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 5460 (2022)

SOFTBALL SPECIFICATION

Type 1, Type 2, Type 3

7500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4.1(Materials)	-	7500	-
Cl.4.1.2(Cover)	-	7500	-
Cl.4.1.3(Inks)	-	7500	-
Cl.4.2(Shape, Dimensions And Weight)	-	7500	-
Cl.5(Construction and Workmanship)	-	7500	-
Cl.6(Packing and Marking)	-	7500	-

31 Dec, 2029

-
Included w.e.f. 03.10.2024

9376

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 12425 (2022)

SPECIFICATION FOR STEEPLECHASE HURDLES First Revision

Steeplechase Hurdles

7500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.2(Top Bar)	-	7500	-
Cl.2.1(Dimension)	-	7500	-
Cl.2.2(Mass)	-	7500	-

31 Dec, 2029

-
Included w.e.f. 03.10.2024

9377

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 4630 (2022)

Indian Standard SPECIFICATION FOR BARBELL SET First Revision

BARBELL SET

7500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.2.1(Bars)	-	7500	-
Cl.2.2(Discs)	-	7500	-
Cl.2.3(Collar)	-	7500	-

31 Dec, 2029

-
Included w.e.f. 03.10.2024

9378

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 4385 (2022)

SPECIFICATION FOR THROWING HAMMERS Second Revision

WU18, WU20/SW, BU18, BU20, SM

7500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Dimension)	-	7500	-
4.3(Weight)	-	7500	-
5.1(Test for center of gravity of Head)	-	7500	-
5.2(Handle Deformation Test)	-	7500	-
5.3(Breaking strength of Handle)	-	7500	-

31 Dec, 2029

-
Included w.e.f. 03.10.2024

9379

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 415 (2022)

SHUTTLECOCKS SPECIFICATION

Grade 1 & Grade 2

7500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.3(Classification)	-	7500	-
Cl.4(Material)	-	7500	-
Cl.5.1(Dimension)	-	7500	-
Cl.5.2(Weight)	-	7500	-
Cl.6.1(For Grade 1 Shuttlecock)	-	7500	-
Cl.6.2(For Grade 2 Shuttlecock)	-	7500	-
Cl.8.1(Pace and Flight)	-	7500	-
Cl.9(Packing and Marking)	-	7500	-

31 Dec, 2029

-
Included w.e.f. 03.10.2024

9380

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 2463 (2022)

RING USED IN GYMNASTICS - SPECIFICATION

Rings used in Gymnastics

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4(Construction and Workmanship)	-	8000	-
Cl.5.1.1(Swing Rope)	-	8000	-
Cl.5.1.2(Tension Rope)	-	8000	-
Cl.5.1.3(Frame)	-	8000	-
Cl.5.1.4(Strap)	-	8000	-
Cl.5.1.5(Ring)	-	8000	-
Cl.5.2(Shape and Dimension)	-	8000	-
CL.6(Performance Requirement)	-	8000	-
Cl.4(Construction and Workmanship)	-	8000	-
Cl.5.1.1(Swing Rope)	-	8000	-
Cl.5.1.2(Tension Rope)	-	8000	-
Cl.5.1.3(Frame)	-	8000	-
Cl.5.1.4(Strap)	-	8000	-
Cl.5.1.5(Ring)	-	8000	-
Cl.5.2(Shape and Dimension)	-	8000	-
CL.6(Performance Requirement)	-	8000	-

31 Dec, 2029

-
-

9381

DELHI TEST HOUSE, Azadhpur

8131406

IS 710 (2024)

MARINE PLYWOOD - SPECIFICATION (Third Revision)

ALL

32000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-6.1(Dimensions (length))	-	1000	COMPLETE TESTING CHARGES :- 32000/-
Cl-6.2(Thickness)	-	500	COMPLETE TESTING CHARGES :- 32000/-
Cl-6.3(Squareness)	-	1000	TESTING CHARGES :- 32000/-
Cl-7.1, 7.2, 7.3, 7.4, 7.5 & 7.6(Workmanship and finish)	-	500	TESTING CHARGES :- 32000/-
Cl-9.3(Moisture Content)	-	1000	TESTING CHARGES :- 32000/-
Cl-9.4.2(Glue Adhesion in Dry State- Adhesion of Plies)	-	1500	TESTING CHARGES :- 32000/-
Cl-9.4.1(Glue Adhesion in Dry State- Glue Shear Strength -Average)	-	1000	TESTING CHARGES :- 32000/-
Cl-9.5.1.1(Glue Adhesion in Water Resistance - Glue Shear Strength -Average)	-	3000	TESTING CHARGES :- 32000/-
Cl-9.5.1.2(Water Resistance Test-Adhesion of plies)	-	1000	TESTING CHARGES :- 32000/-
Cl-9.6(Tensile Strength-Along the grain)	-	5000	TESTING CHARGES :- 32000/-
Cl-9.7(Mycological Test -Adhesion)	-	2500	TESTING CHARGES :- 32000/-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	1500	TESTING CHARGES :- 32000/-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	1500	TESTING CHARGES :- 32000/-
Cl-9.9, Table-3 (i) a((Modulus of Elasticity: Across the Face Grain: Average) Wet Bending)	-	3000	TESTING CHARGES :- 32000/-
Cl-9.9, Table-3 (i) b((Modulus of Elasticity: Across the Face Grain: Minimum Individual) Wet Bending)	-	3000	TESTING CHARGES :- 32000/-
Cl-9.10(Retention of Preservative)	-	2000	TESTING CHARGES :- 32000/-
Cl-9.11(Formaldehyde Content Test)	-	2500	TESTING CHARGES :- 32000/-
Cl-9.4.2(Adhesion of Plies)	-	1000	TESTING CHARGES :- 32000/-

17 Jun, 2027

-
Included w.e.f.08.05.2025

9382

TYPE TEST CENTER SIEMENS LIMITED KALWA, NAVI MUMBAI

7174421

IS/IEC 60947 : Part 5 : Sec 1 (2016)

Low-Voltage Switchgear And Control Gear : Part 5-1 Control Circuit Devices And Switching Elements Electromechanical Control Circuit Devices

Control Circuit Devices and Switching Elements

720000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.3.3.2(Operating limits of contactor relays)	-	44640	-
8.3.3.3(Temperature rise)	-	20760	-
8.3.3.4(Dielectric properties)	-	29808	-
8.2.4(Mechanical and electrical properties of terminals)	-	65280	-
8.3.3.5.2(Test circuits and connections)	-	0	Covered by Make Break test
8.3.4.2(Performance under conditional short-circuit current : Test procedure)	-	208000	-
Annex C of IEC 60947-1:2007 (Sequence 5)(Degree of protection of enclosed control circuit devices)	-	65280	-
8.2.5(Verification of actuating force (or moment))	-	20000	-
7.1.4(Clearances and creepage distances)	-	20000	-
8.2.6(Verification of limitation of rotation (of a rotary switch))	-	20000	-
8.3.3.5.2(Test circuits and connections)	-	0	Covered by main clause
8.2.3(Enclosures for equipment)	-	20000	-
8.3.4.1(General conditions for short-circuit tests)	-	0	Covered by main clause
8.1.5(Special tests)	-	500000	-
C.2(Mechanical durability)	-	200000	-
C.3(Electrical durability)	-	500000	-
8.3.4.3(Test circuit and test quantities)	-	0	Covered by main clause
8.3.4.4 a)(Condition of the switching element after the test)	-	0	Covered by main clause
8.3.4.4 b)(Condition of the switching element after the test)	-	0	Covered by main clause
5.2.1(Marking : General ")	-	20000	-
5.2.2(Terminal identification and marking)	-	0	Covered by main clause
5.2.3(Functional markings)	-	0	Covered by main clause
5.2.4(Emergency stop)	-	0	Covered by main clause
5.2.5(Operating diagram)	-	0	Covered by main clause
5.2.5.1(Position indication)	-	0	Covered by main clause
5.2.5.2(Terminal markings for operating diagrams)	-	0	Covered by main clause
5.2.6(Time delay markings)	-	0	Covered by main clause
5.3(Instructions for installation, operation and maintenance)	-	0	Covered by main clause
C.1.2(Observation)	-	0	Covered by main clause
G.8.2.2(Pull-out test)	-	65280	-
G.8.2.3(Torque test)	-	0	Covered by main clause
G.8.2.4(Push test)	-	0	Covered by main clause
G.8.2.5(Bend test)	-	0	Covered by main clause
F.8.1.2.3("Rapid change of temperature test")	-	70000	-
F.8.1.2.4(Impact test)	-	20000	-
F 8.1.2.6("Dielectric test after stresses")	-	12960	-
H.8.2(Voltage drop test)	-	25000	-
H.8.4(OFF-state current)	-	25000	-
H.8.5("Making and breaking capacities")	-	120000	-
H.8.6("Performance under short circuit current conditions")	-	208000	-
F 8.1.2.4(Impact test)	-	0	Covered by main clause
J.7("Constructional requirements")	-	20000	-
J.7("Constructional requirements")	-	0	Covered by main clause
J.7.1.12(Indicator lights with built-in transformers)	-	0	Covered by main clause
J.8.3.3.4(Dielectric test)	-	13000	-
J.8.3.3.4.3("Dielectric test (indicator lights with built-in transformers)")	-	15000	-
J.8.3.4("Short Circuit test (on built-in transformers, if any)")	-	208000	-
J.8.4.2.2(Shock)	-	40000	-
J.8.4.2.3(Vibration)	-	40000	-
J.8.4.3(Indirect support mounting)	-	0	Covered by main clause
J.8.5("Degree of protection for indicating towers")	-	48000	-
K 8.3.5(Verification of mechanical operation of position switches at limits of temperature)	-	30000	-
K 8.3.7(Verification of robustness of the actuating system)	-	70000	-
K 8.3.4("Performance under conditional shortcircuit current")	-	208000	-
L.8.4(Special test for mechanically linked contact elements)	-	40000	-
L.8.4(Special test for mechanically linked contact elements)	-	0	Covered by main clause
7.1.3(Current-carrying parts and their connections)	-	0	Covered by main clause
7.2.4.1(Making and breaking capacities)	-	120000	-
7.2.4.3(Durability)	-	0	Covered by main clause
7.2.3(Dielectric properties)	-	30000	-
8.2.3(Enclosures for equipment)	-	0	Covered by main clause
8.2.4.2(Tests of mechanical strength of terminals)	-	40000	-
8.2.4.3(Testing for damage to and accidental loosening of conductors (flexion test))	-	0	Covered by main clause
8.2.4.4(Pull-out test)	-	0	Covered by main clause
8.2.4.5(Test for insertability of unprepared round copper conductors having the maximum cross-section)	-	0	Covered by main clause
8.2.7(Conduit pull-out test, torque test, and bending test with metallic conduits)	-	0	Covered by main clause
8.3.3.5(Making and breaking capacities)	-	120000	-
C.1.2(Observation)	-	0	Covered by main clause
F.8.1.2.5(Damp heat, cyclic)	-	50000	-
F.8.1.2.1(Dielectric tests in new conditions)	-	15000	-
J.8.3.3.3(Temp-rise tests)	-	21000	-
J.8.3.3.4.3("Dielectric test (indicator lights with built-in transformers)")	-	29000	-
K 8.3.5(Verification of mechanical operation of position switches at limits of temperature)	-	30000	-
K.8.3.6(Verification of direct opening action)	-	0	Covered by main clause
N.3(Method based on durability test results)	-	0	Covered by main clause
K.8.3.6(Verification of direct opening action)	-	0	Covered by main clause
5.2.1(" Marking : General ")	-	0	Covered by main clause
5.2.2(Terminal identification and marking)	-	0	Covered by main clause
5.2.3(Functional markings)	-	0	Covered by main clause
J.7.1.12(Indicator lights with built-in transformers)	-	0	Covered by main clause
J.8.3.3.4(Dielectric test)	-	0	Covered by main clause
5.2.4(Emergency stop)	-	0	Covered by main clause
J.8.3.3.3(Temp-rise tests)	-	0	Covered by main clause
J.8.3.4("Short Circuit test (on built-in transformers, if any)")	-	0	Covered by main clause
5.2.5(Operating diagram)	-	0	Covered by main clause
J.8.4.2.2(Shock)	-	40000	Covered by main clause
5.2.5.1(Position indication)	-	0	Covered by main clause
J.8.4.2.3(Vibration)	-	40000	-
J.8.4.3(Indirect support mounting)	-	0	Covered by main clause
5.2.5.2(Terminal markings for operating diagrams)	-	0	Covered by main clause
J.8.5("Degree of protection for indicating towers")	-	48000	-
5.2.6(Time delay markings)	-	0	Covered by main clause
H.8.2(Voltage drop test)	-	30000	-
5.3(Instructions for installation, operation and maintenance)	-	0	Covered by main clause
H.8.4(OFF-state current)	-	30000	-
H.8.5("Making and breaking capacities")	-	120000	-
H.8.6("Performance under short circuit current conditions")	-	208000	-
7.1.3(Current-carrying parts and their connections)	-	0	Covered by main clause
G.8.2.2(Pull-out test)	-	0	Covered by main clause
7.1.4 of IEC 60947-1:2007 (Sequence 6)(Measurement of Clearances and creepage distances)	-	20000	-
G.8.2.3(Torque test)	-	0	Covered by main clause
7.2.4.1(Making and breaking capacities)	-	120000	-
7.2.4.1(Making and breaking capacities)	-	0	Covered by main clause
G.8.2.4(Push test)	-	0	Covered by main clause
G.8.2.5(Bend test)	-	0	Covered by main clause
F.8.1.2.1(Dielectric tests in new conditions)	-	0	Covered by main clause
7.2.4.3(Durability)	-	500000	-
F.8.1.2.4(Impact test)	-	0	Covered by main clause
F.8.1.2.3("Rapid change of temperature test")	-	50000	-
F 8.1.2.6("Dielectric test after stresses")	-	20000	-
C.2(Mechanical durability)	-	0	Covered by main clause
C.3(Electrical durability)	-	0	Covered by main clause
8.3.4.2(Performance under conditional short-circuit current : Test procedure)	-	208000	-
8.3.3.5(Making and breaking capacities)	-	120000	-
8.3.3.2(Operating limits of contactor relays)	-	0	Covered by main clause
7.2.3(Dielectric properties)	-	0	Covered by main clause
8.3.3.4(Dielectric properties)	-	0	Covered by main clause
8.3.3.3(Temperature rise)	-	0	Covered by main clause
8.1.5(Special tests)	-	0	Covered by main clause
8.2.7(Conduit pull-out test, torque test and bending test with metallic conduits)	-	0	Covered by main clause
8.2.6 (Sequence 6)(Verification of limitation of rotation (of a rotary switch))	-	0	Covered by main clause
8.2.5 (Sequence 5)(Verification of actuating force (or moment))	-	0	Covered by main clause
8.2.4.5(Test for insertability of unprepared round copper conductors having the maximum cross-section)	-	0	Covered by main clause
8.2.4.4(Pull-out test)	-	0	Covered by main clause
8.2.4.3(Testing for damage to and accidental loosening of conductors (flexion test))	-	0	Covered by main clause
8.2.4.2(Tests of mechanical strength of terminals)	-	0	Covered by main clause
8.2.4(Mechanical and electrical properties of terminals)	-	0	Covered by main clause
8.3.4.3(Test circuit and test quantities)	-	0	Covered by main clause
8.3.4.1(General conditions for short-circuit tests)	-	0	Covered by main clause
8.3.4.4 b)(Condition of the switching element after the test)	-	0	Covered by main clause
8.3.4.4 a)(Condition of the switching element after the test)	-	0	Covered by main clause
8.3.1(Degree of protection of enclosed control circuit devices)	-	0	Covered by main clause
F.8.1.2.5(Damp heat, cyclic)	-	0	Covered by main clause
K 8.3.7(Verification of robustness of the actuating system)	-	0	Covered by main clause
K 8.3.4("Performance under conditional shortcircuit current")	-	0	Covered by main clause
F 8.1.2.4(Impact test)	-	0	Covered by main clause

07 Nov, 2026

-
Included w.e.f. 12.09.2024 Exclusion: EMI/EMC Tests, Cl.7.1.2.2, 8.2.1.1.1 (Glow wire test), Cl.8.2.1.1.2 (Flamability, Hot wire ignition and arc ignition tests on materials), Cl.8.2.1.1 (Test of resistance to abnormal heat and fire) Seq I: Temperature rise upto 6300A Dielectric test 0-5kV power frequency & upto 18.5kV Impulse withstand Operating limits and Mechanical properties - Yes Seq II / III / IV: Making and Breaking capabilities / Short circuit test upto 55kA @ 760V ac test voltage and 100ms duration max. Seq V: IP1x to 7x, IPx1 to IPx6 Seq V: Yes

9383

RITES Eastern Region Laboratory, Kolkata

5135804

IS 12650 (2018)

Textiles – Jute bags for packing 50 kg foodgrains – Specification (third revision)

6368 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4-4.1(MANUFACTURE)	-	500	per sample
4-4.2(Manufacture-The number of stitches per decimeter shall be 10 ±1.)	-	500	per sample
4-4.3(Manufacture-Safety Stitch-The number of safety union stitches per decimetre shall be10 ± 1.)	-	0	Testing charges included under Cl.4.2
4-4.5(Manufacture- Freedom from Defects )	-	300	per sample
5-5.1-Table 1-Sr. no. i)(SPECIFIC REQUIREMENTS-Dimensions (see Note 1) Cl. 8.3.2 of IS 9113 a) Out side Length , cm 94 (For both type A & Type B) Tolerance + 4 / -0 cm)	-	300	per sample
5-5.1-Table 1-Sr. no.i i)(SPECIFIC REQUIREMENTS-Cl. 8.4.2 of IS 9113 Ends/dm Type A 46 + 2 /Type B 76 + 4 / -3)	-	500	per sample
5-5.1-Table 1-Sr. no.iii)(SPECIFIC REQUIREMENTS-Cl. 8.4.2 of IS 9113 Picks/dm Type A 50 (2 x 25) / Type B 28 + 2)	-	0	Testing charges Rs.500 for both Ends and Picks
5-5.1-Table 1-Sr. no.iv)(SPECIFIC REQUIREMENTS-Cl. 8.5.2 of IS 9113 Corrected Mass/bag, g ( See Note 2) For both Type A & Type B 665 + 8.0 / -6.0 percent)	-	500	per sample
5-5.1-Table 1-Sr. No.v)(SPECIFIC REQUIREMENTS-Cl. 8.6.2 of IS 9113 Average breaking strength of sacking (ravelled-strip method, 10 cm × 20 cm), Min, N (kgf): a ) Warpway- 1570 (160) for both type A & Type B)	-	1000	per sample
5-5.1-Table 1-Sr. No.v)(SPECIFIC REQUIREMENTS-Cl. 8.6.2 of IS 9113 Average breaking strength of sacking (ravelled-strip method, 10 cm × 20 cm), Min, N (kgf): b ) Weftway- 1420 (145) for both type A & Type B)	-	0	Testing charges Rs.1000/- for both Wrap and Weft
5-5.1-Table 1-Sr. No.vi)(SPECIFIC REQUIREMENTS-Cl. 8.7 of IS 9113 Average side seam strength (5 cm ×20 cm raveled strip), Min, N (kgf): 490 (50) for both type A & Type B)	-	1000	per sample
5-5.1-Table 1-Sr. No.vii)(SPECIFIC REQUIREMENTS-Cl. 8.2 of IS 9113 Moisture regain, percent, Max (see Note 3) 22 for both type A & Type B)	-	750	per sample
5-5.1-Table 1-Sr. No.viii)(SPECIFIC REQUIREMENTS-Cl. 8.8 of IS 9113 Oil content on dry de-oiled material, Max 3 for both type A & Type B)	-	918	per sample
5-5.2-Table 2-Sr. No.i)(SPECIFIC REQUIREMENTS-Cl. 8.9 of IS 9113 Total number of bags per bale (see Note 1) 500 )	-	0	per sample
5-5.2-Table 2-Sr. No.ii)(SPECIFIC REQUIREMENTS- Total number of bags per bale (see Note 1) 25)	-	0	Testing charges covered under 5.5.1
5-5.2-Table 2-Sr. No.iii)(SPECIFIC REQUIREMENTS- Contract mass of a bale, kg (see Note 2) 332.5)	-	0	Testing charges covered under 5.5.1
5-5.2-Table 2-Sr. No.iv)(SPECIFIC REQUIREMENTS- Cl. 8.1 of IS 9113 Corrected net mass of a bale, kg)	-	0	Testing charges covered under 5.5.1
5-5.2-Table 2-Sr. No.v)(SPECIFIC REQUIREMENTS- Visual Number of joined bags per bundle of 25 bags )	-	0	per sample
5-5.3(SPECIFIC REQUIREMENTS - The contract moisture regain shall be 20 percent. )	-	0	Testing charges covered under 5.5.1
5-5.4-5.4.1-5.4.1.1(Additional Requirements for Labelling as Environment Friendly Products-General Requirement)	-	0	per sample
4-4.4(Manufacture-Hemming at the Mouth )	-	100	per sample

19 Mar, 2026

-
Exclusion: Table-3 Specific requirements for ECO mark

9384

RITES Eastern Region Laboratory, Kolkata

5135804

IS 1786 (2008)

High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision)

5600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 6.1(Nominal Size)	-	100	PER SAMPLE
Cl 7.2(Weight)	-	0	Rs.100 includes for both Nominal Size ,weight, length, width, thickness
Cl 6.1(Length, Width & Thickness)	-	0	Rs.100 includes for both Nominal Size ,weight, length, width, thickness
Cl 5(Deformations and Surface Characteristics)	-	0	Pull test test Facility not available.
Cl. 8.1 Table 3(Elongation, percentage)	-	1500	Testing charges Rs.1500/- for UTS,YS,%E
Cl. 8.1 Table 3(TS/YS ratio)	-	0	Testing charges Rs.1500/- for UTS,YS,%E
Cl. 8.1 Table 3(Tensile Strength (TS))	-	0	Testing charges Rs.1500/- for UTS,YS,%E
Cl. 8.1 Table 3(Yield Stress (YS))	-	0	Testing charges Rs.1500/- for UTS,YS,%E
Cl. 7.2 Table -2 (Nominal Mass)	-	0	Rs.100 includes for both Nominal Size ,weight, length, width, thickness
Cl. 5 (Cl. 5 - Mean projected area of transverse ribs (1/3 of Ar))	-	0	Rs.100 includes for both Nominal Size ,weight, length, width, thickness, projected area
Cl. 5 (Cl.5 Mean area of ribs/unit length (Ar), )	-	0	Rs.100 includes for both Nominal Size ,weight, length, width, thickness, mean area
Cl.9.4 & Cl. 9.4.1(Rebend test)	-	1000	Rs.1000/- for both bend and Re-bend test
Cl. 9.3, Table 4(Bend Test )	-	0	Rs.1000/- for both bend and Re-bend test
Cl 9.3(Load In One Direction)	-	500	per sample
Cl 8.1(UTM)	-	0	UTS CHARGE
Cl 9.4(Load In Other Direction From Bend)	-	1000	PER SAMPLE
4.1(Sulphur and phosphorous)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
4.1(CE)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
4.1( Nitrogen%)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
4.1(Ni)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
4.1(Mo)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
4.1(Cr)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
4.1( Ti)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
4.1(V)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
4.1( Aluminium %)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
4.1( Copper %)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
4.1(Silicon %)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
4.1(Sulphur %)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
4.1(Phosphorus %)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
4.1(Manganese %)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
4.1(Carbon %)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
4.1( Nb)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
Clause 4.2 Note 2, Amendment 1 & 3(Nb+V+B+Ti)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Carbon-IS 228)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Sulphur-IS 228)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Phosphorous- IS 228)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Sulphur & Phosphorous)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
Cl.4.2 of IS 1786 (Grade:- Fe 415D,Fe 415S, Fe 500D,Fe 500S,Fe 550D)(Carbon Equivalent)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
Cl.4.2 of IS 1786 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
Cl.4.2 of IS 1786 (Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
Cl.4.2 of IS 1786 (Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
Cl.4.2 of IS 1786 (Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
Cl.4.2 of IS 1786 (Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
Cl.4.2 of IS 1786 (Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
Cl.4.2 of IS 1786 (Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
Clause 4.2 Note 3, Amendment 1 & 3(Cr+Cu+Ni+Mo+P)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
Clause 4.2, Amendment 3 Note 4("In order to ascertain whether sufficient quantities of nitrogen binding elements are present, following formula may be used, where all elements are in ppm. (N−120)< (Al free/10)+((Ti+V)/7)+(Nb/14)")	-	500	including
Cl. 4.3(Visual Inspection.)	-	500	including
Cl. 5.2(Surface Characteristics)	-	100	per sample
Cl. 5.3 (b)(The ribs contributing the projected area - Transverse Ribs)	-	500	The ribs contributing the projected area - Transverse Ribs & Longitudinal Ribs
Cl. 5.3 (a)(The ribs contributing the projected area - Longitudinal Ribs)	-	0	The ribs contributing the projected area - Transverse Ribs & Longitudinal Ribs
Clause 6.3(Effective Cross-sectional Area)	-	100	per sample
4.2(Boron (B))	-	800	for all chemical analysis

19 Mar, 2026

-
Except Pull out test

9385

RITES Eastern Region Laboratory, Kolkata

5135804

IS 15138 (2010)

Textiles – Jute bags for packing 50 kg sugar – Specification (first revision)

6368 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Fabric)	-	500	per sample
4.2 IS 9113(Seam )	-	500	per sample
4.3 IS 9113(Hemming at the Mouth )	-	500	per sample
4.4 Annex B(Freedom from Defects)	-	300	per sample
5,5.1,5.2 Table 1,i) a) Cl.8.3.2 of IS 9113 Table A / B / C( Outside length )	-	300	per sample
5,5.1,5.2 Table 1,i) b) Cl.8.3.2 of IS 9113 Table A / B / C(Outside width)	-	300	per sample
5,5.1,5.2 Table 1,ii) Cl.8.4.2 of IS 9113 Table A / B / C(Ends/dm)	-	500	per sample
5,5.1,5.2 Table 1,iii) Cl.8.4.2 of IS 9113 Table A / B / C(Picks/dm)	-	500	per sample
5,5.1,5.2 Table 1,iv) Cl.8.5.2 of IS 9113 Table A / B / C(Corrected mass per bag)	-	500	per sample
5,5.1,5.2 Table 1,v) a) Cl.8.6.2 of IS 9113 Table A / B / C(Average breaking load of sacking (ravelled strip method, 5.0 cm × 20.0 cm), Min, N (kgf) Warpway:)	-	1000	per sample
5,5.1,5.2 Table 1,v) b) Cl.8.6.2 of IS 9113 Table A / B / C(Average breaking load of sacking (ravelled stripmethod, 5.0 cm × 20.0 cm), Min, N (kgf) Weftway :)	-	1000	per sample
5,5.1,5.2 Table 1,vi) a) Cl.8.7 of IS 9113 Table A / B / C( Average breaking load of sacking (ravelled stripmethod, 5.0 cm × 20.0 cm), Min, N (kgf) Warpway:)	-	1000	per sample
5,5.1,5.2 Table 1,vi) b) Cl.8.7 of IS 9113 Table A / B / C( Average breaking load of sacking (ravelled stripmethod, 5.0 cm × 20.0 cm), Min, N (kgf) Weftway :)	-	1000	per sample
5,5.1,5.2 Table 1,vii)a) Cl.8.2 of IS 9113 Table A / B / C(Moisture regain)	-	425	per sample
5,5.1,5.2 Table 1,vii)b) Table A / B / C(Contract moisture regain)	-	425	per sample
5.3 Table 2 v) Cl.8.8 of IS 9113 (Oil content on dry deoiled material basis)	-	918	per sample
5.3 Table 2 ii) ( Number of joined bags per)	-	300	per sample
5.3 Table 2 i) Cl.8.9of IS 9113 (Total number of bags per bale)	-	300	per sample
6 IS 2873(PACKING)	-	0	per sample
4.1.1(Fabric)	-	500	per sample
4.5 IS 10146(Liner)	-	0	per sample
5.3 Table 2 iii) Table A / B / C (Contract mass of a bale,)	-	500	per sample
5.3 Table 2 iv) Cl.8.1 of IS 9113 (Corrected net mass of a bale)	-	500	per sample

19 Mar, 2026

-
-

9386

RITES Eastern Region Laboratory, Kolkata

5135804

IS 2830 (2012)

Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into steel for general structural purposes - Specification (Third Revision)

5100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 10.2(Workmanship)	-	100	PER SAMPLE
Cl 10.2(Press)	-	1000	PER SAMPLE
Cl 10.3(Workmanship)	-	100	PER SAMPLE
Cl 11(Length, Width & Thickness)	-	100	PER SAMPLE
Cl 9(Workmanship)	-	100	PER SAMPLE
6.1(Carbon %)	-	800	Chemical analysis charges is applicable for testing all elements as per the IS 2830
6.1(Cr)	-	800	Chemical analysis charges is applicable for testing all elements as per the IS 2830
6.1( Copper %)	-	800	Chemical analysis charges is applicable for testing all elements as per the IS 2830
6.1(Manganese %)	-	800	Chemical analysis charges is applicable for testing all elements as per the IS 2830
6.1(Mo)	-	800	Chemical analysis charges is applicable for testing all elements as per the IS 2830
6.1(Ni)	-	800	Chemical analysis charges is applicable for testing all elements as per the IS 2830
6.1(Phosphorus %)	-	800	Chemical analysis charges is applicable for testing all elements as per the IS 2830
6.1(Silicon %)	-	800	Chemical analysis charges is applicable for testing all elements as per the IS 2830
6.1(Sulphur %)	-	800	Chemical analysis charges is applicable for testing all elements as per the IS 2830
6.1(V)	-	800	Chemical analysis charges is applicable for testing all elements as per the IS 2830
10.1 (a)(Macro-examination)	-	1500	Testing charges Rs.1500/- for Both Micro and Sulphur print Examination
10.1 (b)(Sulphur print)	-	1500	Testing charges Rs.1500/- for Both Micro and Sulphur print Examination
6.1( Nb)	-	800	Chemical analysis charges is applicable for testing all elements as per the IS 2830
6.1( Ti)	-	800	Chemical analysis charges is applicable for testing all elements as per the IS 2830
6.1( Nitrogen%)	-	800	Chemical analysis charges is applicable for testing all elements as per the IS 2830
Cl. 10.3(Camber)	-	500	PER SAMPLE
Clause 10.2(Bend)	-	700	PER SAMPLE
11(Dimensions)	-	500	PER SAMPLE
Clause 6, Table 1 Note : 1(Carbon Equivalent)	-	800	Chemical analysis charges is applicable for testing all elements as per the IS 2830
Clause 6, Table 1 Note : 3(Nb+V+Ti)	-	800	Chemical analysis charges is applicable for testing all elements as per the IS 2830
6(Sulphur + Phosphorus)	-	800	Chemical analysis charges is applicable for testing all elements as per the IS 2830

19 Mar, 2026

-
-

9387

RITES Eastern Region Laboratory, Kolkata

5135804

IS 2831 (2012)

Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into structural steel (Ordinary Quality) - Specification (Fourth Revision)

3900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 6.1, Table 1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	800	Chemical analysis charges is applicable for testing all elements as per the IS 2831
Cl. 6.1, Table 1(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	800	Chemical analysis charges is applicable for testing all elements as per the IS 2831
Cl. 6.1, Table 1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	800	Chemical analysis charges is applicable for testing all elements as per the IS 2831
Cl. 6.1, Table 1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	800	Chemical analysis charges is applicable for testing all elements as per the IS 2831
Cl. 6.1, Table 1(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	800	Chemical analysis charges is applicable for testing all elements as per the IS 2831
Cl. 6.1, Table 1(Aluminium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	800	Chemical analysis charges is applicable for testing all elements as per the IS 2831
Cl. 6.1, Table 1(Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	800	Chemical analysis charges is applicable for testing all elements as per the IS 2831
Cl. 6.1, Table 1(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	800	Chemical analysis charges is applicable for testing all elements as per the IS 2831
Cl. 6.1, Table 1(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	800	Chemical analysis charges is applicable for testing all elements as per the IS 2831
Cl. 6.1, Table 1(Titanium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	800	Chemical analysis charges is applicable for testing all elements as per the IS 2831
9( FREEDOM FROM DEFECTS)	-	100	Chemical analysis charges is applicable for testing all elements as per the IS 2831
10.1.a)( Macro examination IS 11371)	-	750	Per Sample
10.1.b)( Sulphur print tests IS 12037)	-	750	Per Sample
11 & 12(DIMENSIONS and Tolerances)	-	100	Per Sample
Cl. 6.1, Table 1(Niobium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	800	Chemical analysis charges is applicable for testing all elements as per the IS 2831
Clause 6.1.1(Carbon Equivalent (CE))	-	800	Chemical analysis charges is applicable for testing all elements as per the IS 2831
10.1.a)( Macro examination IS 11371)	-	750	-
10.1.b)( Sulphur print tests IS 12037)	-	750	-
11 & 12(DIMENSIONS and Tolerances)	-	100	-

19 Mar, 2026

-
-

9388

RITES Eastern Region Laboratory, Kolkata

5135804

IS 16186 (2014)

Textiles - Light weight jute sacking bags for packing 50 kg foodgrains - Specification

6268 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(i)The bags shall be made from single piece of 2/1 twill weave jute sacking of uniform construction with warp running along the length of the bag. )	-	500	per sample
4.1(ii) The mass per square meter of sacking used in the fabric of the bag 504 g.)	-	500	per sample
4.2(Seam-IS 9113 (Cl.5.1.2))	-	500	per sample
4.2.i)( Type of stitches Herakle )	-	500	per sample
4.2.iii)( Stitches/dm 10 ± 1 )	-	500	per sample
4.3.ii)(Tex of jute twine )	-	500	per sample
4.3(Union Safety Stitch-IS 9113 (Cl.5.1.2))	-	500	per sample
4.3.i)( Stitches/dm 10 ± 1 )	-	500	per sample
4.4(Hemming at the mouth-IS 9113 (Cl.5.1.2))	-	500	per sample
4.4(Fabric shall be hemmed with jute yarn of 310 tex )	-	500	per sample
4.5(Freedom from defects)	-	300	per sample
4.1 & 5.1, Table 1(Dimension-IS 9113 (Cl.8.3.2))	-	300	per sample
4.1 & 5.1, Table 1(Outside Length, cm )	-	300	per sample
4.1 & 5.1, Table 1(Outside Width, cm )	-	300	per sample
4.1 & 5.1, Table 1(Ends /dm-IS 9113 (Cl.8.4.2))	-	500	per sample
4.1 & 5.1, Table 1(Picks/dm-IS 9113 (Cl.8.4.2))	-	500	per sample
4.1 & 5.1, Table 1(Corrected Mass/Bag,g-IS 9113 (Cl.8.5.2))	-	500	per sample
4.1 & 5.1, Table 1(Average Breaking Strength in N)	-	1000	per sample
4.1 & 5.1, Table 1(Warpway -IS 9113 (Cl.8.6.2))	-	500	per sample
4.1 & 5.1, Table 1(Weftway-IS 9113 (Cl.8.6.2))	-	500	per sample
4.1 & 5.1, Table 1(Average Seam Strength in N-IS 9113 (Cl.8.7))	-	1000	per sample
4.1 & 5.1, Table 1(Moisture Regain, Percent-IS 9113 (Cl.8.2))	-	750	per sample
4.1 & 5.1, Table 1(Oil content, Percent-IS 9113 (Cl.8.5.2))	-	918	per sample

19 Mar, 2026

-
-

9389

RITES Eastern Region Laboratory, Kolkata

5135804

IS 2566 (1993)

Textiles – B-twill jute bags for packing foodgrains – Specification (third revision)

5618 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl4.2( IS 9113 )(HEMING AT THE MOUTH At the mouth of the bag, the raw edges of fabric shall be turned over first to a depth of minimum 18 mm and then to a depth of 20 mm minimum and the three layers of fabric thus formed shall be hemmed with jute yarns (see 5.1.2).)	-	500	per sample
Cl4.3, Cl.4.3.1. See fig 1 & IS 9113( Seam For bags with hemming at the mouth, the sides of the bags shall be sewn with overhead or herakles stitches on selvedge through two layers of fabric ( see Fig. 1 ). The stitching shall be of even tension throughout with all the loose ends securely fastened. The number of stitches per 10 cm at the sides shall be between 9 and 11 ( see also IS 9113 : 1993 ).)	-	500	per sample
Cl4.3, Cl.4.3.1. See fig 1 & IS 9113(For bags with selvedge at the mouth, the stitching of the raw edges of the bag shall be done after turning to a depth of 38 mm, with overhead or herakle stitches through four layers of the fabric ( see Fig. 2 ). The bottom of the bag shall be stiched at selvedge through two layers of the fabric with overhead or herakle stitch as the case may be ( see also IS 9113 :1993 ).)	-	500	per sample
Cl.4.4 (IS 19113)( Joined Bag The joining shall be done in such a manner that warp and weft shall run in the same direction.)	-	300	per sample
Cl.4.5( Freedom from Defects The bags should be generally free from weaving and sewing defects which effect the performance of the bag, such as holes, cuts, tears, floats, crushed selvedges, soots, stains, gap stitches, loose ends and frayed ends.)	-	300	per sample
Cl.5.1 (IS 1954 : 1990) The bag shall conform to the requirements specified in Table 1.(i) Dimensions ( see Note ):)	-	300	per sample
Cl.5.1 1& Cl.8.5.2 of IS 9113 : 1993 The bag shall conform to the requirements specified in Table (Corrected mass per bag, g:)	-	500	per sample
Cl.5.1 (IS 1963 : 1990) The bag shall conform to the requirements specified in Table 1.(Ends per dm)	-	500	per sample
Cl.5.1 (IS 1963 : 1990) The bag shall conform to the requirements specified in Table 1.(Picks per dm)	-	500	per sample
Cl.5.1 (IS 1969 : 1990) The bag shall conform to the requirements specified in Table 1.(Breaking load of cloth ( Min ) ( revelled strip method. 10 × 20 cm ):)	-	1000	per sample
Cl.5.1 (IS 9030 : 1990) The bag shall conform to the requirements specified in Table 1.(Scam breaking load ( Min ) ( revelled strip method, 5 × 20 cm ) N ( kgf ))	-	1000	per sample
Cl.5.2 & Table 2. Cl 8.9 of IS 9113 : 1993( The bales containing the bags shall conform to the requirements as laid down in Table 2. i) Total number of bags per bale)	-	0	per sample
Cl.5.2 & Table 2. Cl 8.9 of IS 9113 : 1993( The bales containing the bags shall conform to the requirements as laid down in Table 2. ii) Number of joined bags per bundle of 25 bags)	-	0	per sample
Cl.5.2 & Table 2. Cl 8.9 of IS 9113 : 1993( The bales containing the bags shall conform to the requirements as laid down in Table 2. iv) Contract mass of a bale, kg)	-	500	per sample
Cl.5.2 & Table 2. Cl 8.1 of IS 9113 : 1993( The bales containing the bags shall conform to the requirements as laid down in Table 2. v) Correct net mass of a bale)	-	500	per sample
Cl.5.2 & Table 2. Cl 8.2 of IS 9113 : 1993( The bales containing the bags shall conform to the requirements as laid down in Table 2. v) Moisture regain percent, Max)	-	500	per sample
Cl.5.2 & Table 2. IS 2969( The bales containing the bags shall conform to the requirements as laid down in Table 2. vi) Oil content on dry deoiled material basis, percent, Max)	-	918	per sample

19 Mar, 2026

-
-

9390

Bharat Test House Pvt Ltd 781 Sonipat Haryana

9137826

IS 302 : Part 2 : Sec 21 (2024)

Household and Similar Electrical Appliancesï¿½Safety Part 2 Particular Requirements Section 21 Storage Water Heaters

Storage Water Heaters

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General requirement)	-	0	-
5(General conditions for the tests)	-	0	-
6(Classification)	-	100	-
7(Marking and instructions)	-	100	-
8(Protection against access to live parts)	-	100	-
9(Starting of motor-operated appliances)	-	0	-
10(Power input and current)	-	500	-
11(Heating)	-	600	-
13(Leakage current and electric strength at operating temperature)	-	350	-
14(Transient overvoltages)	-	550	-
15(Moisture resistance)	-	1200	-
16(Leakage current and electric strength)	-	350	-
17(Overload protection of transformers and associated circuits)	-	400	-
18(Endurance)	-	1300	-
19(Abnormal operation)	-	1300	-
20(Stability and mechanical hazards)	-	500	-
21(Mechanical strength)	-	500	-
22(Construction)	-	600	-
23(Internal wiring)	-	500	-
24(Components)	-	100	-
25(Supply connection and external flexible cords)	-	500	-
26(Terminals for external conductors)	-	350	-
27(Provision for earthing)	-	100	-
28(Screws and connections)	-	100	-
29(Clearances, creepage distances and solid insulation)	-	400	-
30(Resistance to heat and fire)	-	800	-
31(Resistance to rusting)	-	1000	-
32(Radiation, toxicity and similar hazards)	-	1000	-
A.101(Pressure test)	-	1000	-

31 Dec, 2029

-
included.w.e.f 30.10.2024 Exclusion cl 19.11.4.1 to cl 19.11.4.7

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number