BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

14064 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

9391

Atmy Analytical Labs Pvt. Ltd., Faridabad

8167506

IS 1285 (2023)

WROUGHT ALUMINIUM AND ALUMINIUM ALLOYS EXTRUDED ROUND TUBE AND HOLLOW SECTIONS FOR GENERAL ENGINEERINGPURPOSES SPECIFICATION

all

8000 View breakup
-

Clause No.	Exclusion	Remark
6.1("The extruded round tube and hollow sections shall be sound and visually free from harmful defects. ")	-	-
6.2(Slight discoloration due to heat treatment, minor polishing marks and spiral marks due to roll straightening shall not be a cause for rejection.)	-	-
8("Dimensions and tolerances of the material shall be as laid down in the Indian Standards indicated below: a) Extruded round tube IS 2673; and b) Extruded hollow sections IS 6477.")	-	-
9(" Extruded round tubes and hollow sections shall be made from alloys specified in IS 733. 9.2 The chemical analysis of the material shall be carried out either in accordance with the methods specified in IS 504 (Part 1 to 12) and IS 504 (Part 13 to 16) or by any other established instrumental/chemical method. In case of any dispute the method specified in relevant parts of IS 504 shall be used as referee method. However, when the method is not given in IS 504, the referee method shall be as agreed to between the purchaser and the manufacturer. ")	-	-
10(Tensile test)	-	-
Cl.9.1(Aluminium- IS 504 and its parts or any other intrumental/chemical methods)	-	-
Cl.9.1(Copper- IS 504 and its parts or any other intrumental/chemical methods)	-	-
Cl.9.1(Magnesium- IS 504 and its parts or any other intrumental/chemical methods)	-	-
Cl.9.1(Silicon- IS 504 and its parts or any other intrumental/chemical methods)	-	-
Cl.9.1(Iron- IS 504 and its parts or any other intrumental/chemical methods)	-	-
Cl.9.1(Manganese- IS 504 and its parts or any other intrumental/chemical methods)	-	-
Cl.9.1(Zinc- IS 504 and its parts or any other intrumental/chemical methods)	-	-
Cl.9.1(Titanium and/ or other grain refining elements- IS 504 and its parts or any other intrumental/chemical methods)	-	-
Cl.9.1(Chromium- IS 504 and its parts or any other intrumental/chemical methods)	-	-
Cl.9.1(Remarks (Ti+V) - IS 504 and its parts or any other intrumental/chemical methods)	-	-
Cl.9.1(Remarks (Cr+Mn) - IS 504 and its parts or any other intrumental/chemical methods)	-	-
Cl.9.1(Remarks (Total Impurities)- IS 504 and its parts or any other intrumental/chemical methods)	-	-

25 Feb, 2027

-
-

9392

Atmy Analytical Labs Pvt. Ltd., Faridabad

8167506

IS 2347 (2023)

DOMESTIC PRESSURE COOKER ï¿½ SPECIFICATION

ALL

32400 View breakup
-

Clause No.	Exclusion	Remark
4.1(Gross capacity)	-	-
4.2(Body Capacity)	-	-
5.1(Body, Lid, Containers and Grid)	-	-
5.1.2(Body and Lid )	-	-
5.1.3(Stainless steel pressure cooker)	-	-
5.1.4(Aluminium cooker )	-	-
5.2(Safety Relief Device)	-	-
5.3(Gasket)	-	-
5.4(Handles and Knobs)	-	-
5.5(Pressure Regulating Device )	-	-
5.6(Vent Seal Pin for Pressure Regulating Device )	-	-
5.7(Vent Pipe )	-	-
5.8(Vent Pipe Nut )	-	-
5.9(Spring )	-	-
5.1(Material of Rim )	-	-
5.11(Visual Pressure Indicator)	-	-
5.12(Gasket Release System)	-	-
6(Construction)	-	-
7(Workmanship and Finish )	-	-
8.1(Air Pressure Test )	-	-
8.2(Proof Pressure Test )	-	-
8.3(Operating Test for Pressure Regulating Device )	-	-
8.4(Test for Safety Relief Device )	-	-
8.5(Bursting Pressure Test )	-	-
8.6(Test for Removal of Lid under Pressure )	-	-
8.7(Test for Spring Loaded Mechanism )	-	-
8.8(Composite Cooker Base )	-	-
8.9(Aluminium induction compatible Base )	-	-
8.1(Handles of cooker )	-	-
8.11(External Coating)	-	-
8.12(Internal Coating )	-	-
8.13(Integral electrical heating)	-	-
8.14(Ply construction cooker Body )	-	-
8.15.1(Fragmentation Test )	-	-
8.15.2(Ball Drop Test )	-	-
8.15.3(Thermal Shock Test )	-	-
8.15.4(Free Fall Test)	-	-
8.17(Test for Effectiveness for Induction Bottom)	-	-
11(Marking )	-	-
12(Packing )	-	-
4(Capacity)	-	-
4.2(Body Capacity)	-	-
5.1.1(Body, Lid, Containers and Grid)	-	-
5.1.2(Body, Lid, Containers and Grid)	-	-
5.1.3(Body, Lid, Containers and Grid)	-	-
5.1.4(Body, Lid, Containers and Grid)	-	-
5.1.5(Body, Lid, Containers and Grid)	-	-
5.2.1(Destructive Type Safety Relief Device)	-	-
5.2.2(Resettable Type Safety Relief Device)	-	-
5.3(Gasket)	-	-
5.4(Handles and Knobs)	-	-
5.5(Pressure Regulating Device)	-	-
5.6(Vent Seal Pin for Pressure Regulating Device)	-	-
5.7(Vent Pipe)	-	-
5.8(Vent Pipe Nut)	-	-
5.9(Spring)	-	-
5.10(Spring)	-	-
5.11(Visual Pressure Indicator)	-	-
5.12(Gasket Release System)	-	-
6(CONSTRUCTION)	-	-
6.1(Pressure Regulating Device)	-	-
6.1.1(Pressure Regulating Device)	-	-
6.1.1(Minimum Inside diameter of Vent Pipe.)	-	-
6.1.2(Pressure Regulating Device)	-	-
6.1.3(Pressure Regulating Device)	-	-
6.1.4(Pressure Regulating Device)	-	-
6.1.5(Pressure Regulating Device)	-	-
6.1.6(Pressure Regulating Device)	-	-
6.2(Safety Relief Device)	-	-
6.2.1(Safety Relief Device)	-	-
6.2.2(Safety Relief Device)	-	-
6.2.3(Safety Relief Device)	-	-
6.3.1(Temperature Responsive Safety Relief Device)	-	-
6.3.2(Temperature Responsive Safety Relief Device)	-	-
6.3.3(Temperature Responsive Safety Relief Device)	-	-
6.4.1(Handles and Knobs)	-	-
6.4.1.1(Handles and Knobs)	-	-
6.4.2(Handles and Knobs)	-	-
6.4.2.1(Handles and Knobs)	-	-
6.5(CONSTRUCTION)	-	-
6.6(CONSTRUCTION)	-	-
6.7(Internal Level Marking)	-	-
6.8(Internal Level Marking)	-	-
7.1(WORKMANSHIP AND FINISH)	-	-
7.2(WORKMANSHIP AND FINISH)	-	-
8.17(Test for Effectiveness for Induction Bottom)	-	-
8.16(PRD with chain)	-	-
8.15.4.2(Glass lid without rim)	-	-
8.15.4.1("Free Fall Test ( Glass lid with rim) ")	-	-
8.15.3(Thermal Shock Test on Tempered Glass lid)	-	-
8.15.2(Ball Drop Test on Tempered Glass lid)	-	-
8.15.1(Fragmentation Test on Tempered Glass lid)	-	-
8.14(3 ply construction cooker body)	-	-
8.13(Pressure cooker with integral electrical heating)	-	-
8.12(Internal Coating)	-	-
7.3(WORKMANSHIP AND FINISH)	-	-
7.4(WORKMANSHIP AND FINISH)	-	-
8.1(Air Pressure Test)	-	-
8.2(Proof Pressure Test)	-	-
8.3.1(Operating Test for Pressure Regulating Device)	-	-
8.4.1(Test for Safety Relief Device)	-	-
8.4.2(Test for Safety Relief Device)	-	-
8.4.2 NOTE(Test for Safety Relief Device)	-	-
8.5(Bursting Pressure Test)	-	-
8.6.1(Tests for Removal of Lid under Pressure For Outer Lid Cooker)	-	-
8.6.2(Tests for Removal of Lid under Pressure For inner Lid Cooker)	-	-
8.6.3(Tests for Removal of Lid under Pressure: For Cooker Fastened by Screw Clamps or Any Other Locking Device)	-	-
8.6.4(Tests for Removal of Lid under Pressure in case of electrical pressure cooker)	-	-
8.7(Test for Spring Loaded Mechanism)	-	-
8.8(Test for stainless steel cookers)	-	-
8.9("For stainless steel, aluminium induction compatible base and 3 ply cooker")	-	-
8.10(Testing of Handles of the cooker)	-	-
8.10 Note 3(Testing of Handles of the cooker)	-	-
8.10 Note 4(Testing of Handles of the cooker)	-	-
8.10 Note 5(Testing of Handles of the cooker)	-	-
8.10 Note 6(Testing of Handles of the cooker)	-	-
8.10.1(Testing of Handles of the cooker)	-	-
8.11.1(External Coating)	-	-
4.1(Gross capacity)	-	-
4.2(Body Capacity)	-	-
5.1(Body, Lid, Containers and Grid)	-	-
5.1.2(Body and Lid )	-	-
5.1.3(Stainless steel pressure cooker)	-	-
5.1.4(Aluminium cooker )	-	-
5.2(Safety Relief Device)	-	-
5.3(Gasket)	-	-
5.4(Handles and Knobs)	-	-
5.5(Pressure Regulating Device )	-	-
5.6(Vent Seal Pin for Pressure Regulating Device )	-	-
5.7(Vent Pipe )	-	-
5.8(Vent Pipe Nut )	-	-
5.9(Spring )	-	-
5.1(Material of Rim )	-	-
5.11(Visual Pressure Indicator)	-	-
5.12(Gasket Release System)	-	-
6(Construction)	-	-
7(Workmanship and Finish )	-	-
8.1(Air Pressure Test )	-	-
8.2(Proof Pressure Test )	-	-
8.3(Operating Test for Pressure Regulating Device )	-	-
8.4(Test for Safety Relief Device )	-	-
8.5(Bursting Pressure Test )	-	-
8.6(Test for Removal of Lid under Pressure )	-	-
8.7(Test for Spring Loaded Mechanism )	-	-
8.8(Composite Cooker Base )	-	-
8.9(Aluminium induction compatible Base )	-	-
8.1(Handles of cooker )	-	-
8.11(External Coating)	-	-
8.12(Internal Coating )	-	-
8.13(Integral electrical heating)	-	-
8.14(Ply construction cooker Body )	-	-
8.15.1(Fragmentation Test )	-	-
8.15.2(Ball Drop Test )	-	-
8.15.3(Thermal Shock Test )	-	-
8.15.4(Free Fall Test)	-	-
8.17(Test for Effectiveness for Induction Bottom)	-	-
11(Marking )	-	-
12(Packing )	-	-
4(Capacity)	-	-
4.2(Body Capacity)	-	-
5.1.1(Body, Lid, Containers and Grid)	-	-
5.1.2(Body, Lid, Containers and Grid)	-	-
5.1.3(Body, Lid, Containers and Grid)	-	-
5.1.4(Body, Lid, Containers and Grid)	-	-
5.1.5(Body, Lid, Containers and Grid)	-	-
5.2.1(Destructive Type Safety Relief Device)	-	-
5.2.2(Resettable Type Safety Relief Device)	-	-
5.3(Gasket)	-	-
5.4(Handles and Knobs)	-	-
5.5(Pressure Regulating Device)	-	-
5.6(Vent Seal Pin for Pressure Regulating Device)	-	-
5.7(Vent Pipe)	-	-
5.8(Vent Pipe Nut)	-	-
5.9(Spring)	-	-
5.10(Spring)	-	-
5.11(Visual Pressure Indicator)	-	-
5.12(Gasket Release System)	-	-
6(CONSTRUCTION)	-	-
6.1(Pressure Regulating Device)	-	-
6.1.1(Pressure Regulating Device)	-	-
6.1.1(Minimum Inside diameter of Vent Pipe.)	-	-
6.1.2(Pressure Regulating Device)	-	-
6.1.3(Pressure Regulating Device)	-	-
6.1.4(Pressure Regulating Device)	-	-
6.1.5(Pressure Regulating Device)	-	-
6.1.6(Pressure Regulating Device)	-	-
6.2(Safety Relief Device)	-	-
6.2.1(Safety Relief Device)	-	-
6.2.2(Safety Relief Device)	-	-
6.2.3(Safety Relief Device)	-	-
6.3.1(Temperature Responsive Safety Relief Device)	-	-
6.3.2(Temperature Responsive Safety Relief Device)	-	-
6.3.3(Temperature Responsive Safety Relief Device)	-	-
6.4.1(Handles and Knobs)	-	-
6.4.1.1(Handles and Knobs)	-	-
6.4.2(Handles and Knobs)	-	-
6.4.2.1(Handles and Knobs)	-	-
6.5(CONSTRUCTION)	-	-
6.6(CONSTRUCTION)	-	-
6.7(Internal Level Marking)	-	-
6.8(Internal Level Marking)	-	-
7.1(WORKMANSHIP AND FINISH)	-	-
7.2(WORKMANSHIP AND FINISH)	-	-
8.17(Test for Effectiveness for Induction Bottom)	-	-
8.16(PRD with chain)	-	-
8.15.4.2(Glass lid without rim)	-	-
8.15.4.1("Free Fall Test ( Glass lid with rim) ")	-	-
8.15.3(Thermal Shock Test on Tempered Glass lid)	-	-
8.15.2(Ball Drop Test on Tempered Glass lid)	-	-
8.15.1(Fragmentation Test on Tempered Glass lid)	-	-
8.14(3 ply construction cooker body)	-	-
8.13(Pressure cooker with integral electrical heating)	-	-
8.12(Internal Coating)	-	-
7.3(WORKMANSHIP AND FINISH)	-	-
7.4(WORKMANSHIP AND FINISH)	-	-
8.1(Air Pressure Test)	-	-
8.2(Proof Pressure Test)	-	-
8.3.1(Operating Test for Pressure Regulating Device)	-	-
8.4.1(Test for Safety Relief Device)	-	-
8.4.2(Test for Safety Relief Device)	-	-
8.4.2 NOTE(Test for Safety Relief Device)	-	-
8.5(Bursting Pressure Test)	-	-
8.6.1(Tests for Removal of Lid under Pressure For Outer Lid Cooker)	-	-
8.6.2(Tests for Removal of Lid under Pressure For inner Lid Cooker)	-	-
8.6.3(Tests for Removal of Lid under Pressure: For Cooker Fastened by Screw Clamps or Any Other Locking Device)	-	-
8.6.4(Tests for Removal of Lid under Pressure in case of electrical pressure cooker)	-	-
8.7(Test for Spring Loaded Mechanism)	-	-
8.8(Test for stainless steel cookers)	-	-
8.9("For stainless steel, aluminium induction compatible base and 3 ply cooker")	-	-
8.10(Testing of Handles of the cooker)	-	-
8.10 Note 3(Testing of Handles of the cooker)	-	-
8.10 Note 4(Testing of Handles of the cooker)	-	-
8.10 Note 5(Testing of Handles of the cooker)	-	-
8.10 Note 6(Testing of Handles of the cooker)	-	-
8.10.1(Testing of Handles of the cooker)	-	-
8.11.1(External Coating)	-	-

25 Feb, 2027

-
-

9393

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 1363 : Part 1 (2023)

Hexagon head bolts, screws and nuts of product grade C Part 1 Hexagon head bolts (Size range M5 to M64) (sixth revision)

17000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Dimensions)	-	7000	For dimensional and other tests
5 - Table 5 (i)(General requirements)	-	10000	For complete mechanical tests
5 - Table 5 (ii)(Thread)	-	10000	For complete mechanical tests
5 - Table 5 (iii)(Mechanical properties)	-	10000	For complete mechanical tests
5 - Table 5 (iv)(Tolerances)	-	10000	For complete mechanical tests
5 - Table 5 (v)(Surface condition)	-	10000	For complete mechanical tests
5 - Table 5 (vi)(Surface integrity)	-	10000	For complete mechanical tests
5 - Table 5 (vii)(Acceptability)	-	10000	For complete mechanical tests
6(Marking and labelling)	-	7000	For dimensional and other tests
7(Designation)	-	7000	For dimensional and other tests
4(Dimensions)	-	-	-
5 - Table 5 (i)(General requirements)	-	-	-
5 - Table 5 (ii)(Thread)	-	-	-
5 - Table 5 (iii)(Mechanical properties)	-	-	-
5 - Table 5 (iv)(Tolerances)	-	-	-
5 - Table 5 (v)(Surface condition)	-	-	-
5 - Table 5 (vi)(Surface integrity)	-	-	-
5 - Table 5 (vii)(Acceptability)	-	-	-
6(Marking and labelling)	-	-	-
7(Designation)	-	-	-

04 Dec, 2028

-
Revised version of IS 1363(P-1):2023 Included w.e.f. 30.05.2024

9394

Bharti Automation Pvt. Ltd.(A Testing Division), Gurugram

8141726

IS 398 : Part 2 (1996)

Aluminium conductors for overhead transmission purposes - Specification: Part 2 aluminium conuuctors, galvanized steel - Reinforced (Third Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
13.4.2 (elec)(Ductility by Elongation Test before stranding)	-	500	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.4.2 (elec)(Ductility by Elongation Test after stranding)	-	500	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.6 (elec)(Resistance test-Aluminium wire before Stranding)	-	750	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.6 (elec)(Resistance test-Aluminium wire after stranding)	-	750	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.7.2 (elec)(Uniformity of Zinc coating)	-	750	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.7.2 (elec)(Mass of Zinc coating)	-	750	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires After Stranding)	-	250	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	250	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.5.1 (elec)(Wrapping Test Aluminium Wires After Stranding)	-	250	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.5.1 (elec)(Wrapping Test Aluminium Wires Before Stranding)	-	250	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.3 Table 1 (elec)(Breaking Load of Steel Wires After Stranding)	-	500	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.3 Table 1 (elec)(Breaking Load of Steel Wires Before Stranding)	-	500	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.8 Table-4 (elec)(Lay Ratio- Steel Core (6 Wire Layer))	-	300	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	300	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	300	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Outermost Layer)	-	300	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	500	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	500	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.4.1 (elec)(Ductility by Torsion Test before stranding)	-	500	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.4.1 (elec)(Ductility by Torsion Test before stranding)	-	500	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.3 Table 2 (elec)(Breaking Load of Steel Wires After Stranding)	-	500	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.3 Table 1 (elec)(Breaking Load of Aluminium Wires After Stranding)	-	500	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.3 Table 2 (elec)(Breaking Load of Steel Wires Before Stranding)	-	500	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.3 Table 1 (elec)(Breaking Load of Aluminium Wires Before Stranding)	-	500	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
10 (elec)(Stranding)	-	0	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires After Stranding)	-	350	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires After Stranding)	-	350	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires Before Stranding)	-	350	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires Before Stranding)	-	350	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.4.1 (mech)(Ductility by Torsion Test after stranding)	-	500	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.4.2 (elec)(Ductility by Elongation Test before stranding)	-	500	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.4.2 (elec)(Ductility by Elongation Test after stranding)	-	500	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.6 (elec)(Resistance test-Aluminium wire before Stranding)	-	750	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.6 (elec)(Resistance test-Aluminium wire after stranding)	-	750	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.7.2 (elec)(Uniformity of Zinc coating)	-	750	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.7.2 (elec)(Mass of Zinc coating)	-	750	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires After Stranding)	-	300	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	300	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.5.1 (elec)(Wrapping Test Aluminium Wires After Stranding)	-	300	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.5.1 (elec)(Wrapping Test Aluminium Wires Before Stranding)	-	300	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.3 Table 1 (elec)(Breaking Load of Steel Wires After Stranding)	-	500	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.3 Table 1 (elec)(Breaking Load of Steel Wires Before Stranding)	-	500	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.8 Table-4 (elec)(Lay Ratio- Steel Core (6 Wire Layer))	-	250	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	250	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	250	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Outermost Layer)	-	250	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	500	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	500	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.4.1 (elec)(Ductility by Torsion Test before stranding)	-	500	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.4.1 (elec)(Ductility by Torsion Test before stranding)	-	500	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.3 Table 2 (elec)(Breaking Load of Steel Wires After Stranding)	-	500	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.3 Table 1 (elec)(Breaking Load of Aluminium Wires After Stranding)	-	500	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.3 Table 2 (elec)(Breaking Load of Steel Wires Before Stranding)	-	500	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.3 Table 1 (elec)(Breaking Load of Aluminium Wires Before Stranding)	-	500	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
10 (elec)(Stranding)	-	0	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires After Stranding)	-	350	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires After Stranding)	-	350	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires Before Stranding)	-	350	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires Before Stranding)	-	350	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.4.1 (mech)(Ductility by Torsion Test before stranding)	-	500	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.4.2 (elec)(Ductility by Elongation Test before stranding)	-	-	-
13.4.2 (elec)(Ductility by Elongation Test after stranding)	-	-	-
13.6 (elec)(Resistance test-Aluminium wire before Stranding)	-	-	-
13.6 (elec)(Resistance test-Aluminium wire after stranding)	-	-	-
13.7.2 (elec)(Uniformity of Zinc coating)	-	-	-
13.7.2 (elec)(Mass of Zinc coating)	-	-	-
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires After Stranding)	-	-	-
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	-	-
13.5.1 (elec)(Wrapping Test Aluminium Wires After Stranding)	-	-	-
13.5.1 (elec)(Wrapping Test Aluminium Wires Before Stranding)	-	-	-
13.3 Table 1 (elec)(Breaking Load of Steel Wires After Stranding)	-	-	-
13.3 Table 1 (elec)(Breaking Load of Steel Wires Before Stranding)	-	-	-
13.8 Table-4 (elec)(Lay Ratio- Steel Core (6 Wire Layer))	-	-	-
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	-	-
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	-	-
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Outermost Layer)	-	-	-
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	-	-
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	-	-
13.4.1 (elec)(Ductility by Torsion Test before stranding)	-	-	-
13.4.1 (elec)(Ductility by Torsion Test before stranding)	-	-	-
13.3 Table 2 (elec)(Breaking Load of Steel Wires After Stranding)	-	-	-
13.3 Table 1 (elec)(Breaking Load of Aluminium Wires After Stranding)	-	-	-
13.3 Table 2 (elec)(Breaking Load of Steel Wires Before Stranding)	-	-	-
13.3 Table 1 (elec)(Breaking Load of Aluminium Wires Before Stranding)	-	-	-
10 (elec)(Stranding)	-	-	-
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires After Stranding)	-	-	-
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires After Stranding)	-	-	-
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires Before Stranding)	-	-	-
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires Before Stranding)	-	-	-
13.4.1 (mech)(Ductility by Torsion Test before stranding)	-	-	-

05 Aug, 2027

-
-

9395

ABSOLUTE EXPERTISE TESTING LABORATORY LLP

8176726

IS 302 : Part 1 (2008)

Safety of household and similar electrical appliances: Part 1 general requirements (Sixth Revision)

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	500	-
8.1.1(Protection against live parts in all positions)	-	500	-
8.1.2(Protection against live parts in openings)	-	500	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	500	-
8.1.4(Protection against live parts against protective impedance)	-	500	-
10.1(Power input)	-	1000	-
10.2(Current input)	-	1000	-
11.1(General)	-	500	-
11.2(General)	-	500	-
11.3(Heating)	-	500	-
13.1(General)	-	1000	-
13.2(Leakage current at operating temperature)	-	1000	-
13.3(Electric Strength at operating temperature)	-	1000	-
14(Transient Over Voltages)	-	1000	-
15.0(General)	-	3000	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	3000	-
15.2(Spillage Test)	-	1000	-
15.3(Humidity Test)	-	1500	-
16.0(General)	-	1000	-
16.1(General)	-	1000	-
16.2(Leakage Current (after Clause 15))	-	1000	-
16.3(Electric Strength (after clause 15 and 16.2))	-	1000	-
17(Over Load Protection of Transformers and associated circuits)	-	1000	-
18(Endurance Test requirements and tests)	-	0	-
19(Abnormal Operation)	-	2000	-
20(Stability test)	-	1000	-
21(Mechanical Strength Test)	-	2000	-
22(Construction verification related test)	-	2000	-
23(General)	-	500	-
25(Supply connection and external flexible cords)	-	1000	-
26(Terminals for external conductors)	-	1000	-
27(Provision for earthing)	-	1000	-
28(Screw test and connections)	-	1000	-
29(clearance, creepage distances and solid insulation)	-	1000	-
30.1(Ball pressure test)	-	1000	-
30.2(Glow Wire Test)	-	1000	-
30.2(Needle Flame Test)	-	1000	-
31(Resistance to Rusting)	-	1000	-
32(Radiation Toxicity and Similar Hazards)	-	500	-
4(General Requirement)	-	0	-
5(General conditions for tests)	-	0	-
6(Classification- IS 302-1)	-	500	-
9(Starting of motor operation test requirements and tests)	-	0	-
8.1.5(Live parts of built-in appliances)	-	500	-
11.4(Heating appliances)	-	500	-
11.5(Motor-operated appliances)	-	500	-
11.6(Combined appliances)	-	500	-
11.7(Duration corresponding)	-	500	-
11.8(Temperature rise)	-	500	-
16(Leakage current and electric strength)	-	500	-
4(General requirement)	-	0	-
17(Overload protection of transformers and associated circuits)	-	500	-
18(Endurance)	-	0	-

11 Mar, 2027

-
Exclusion: Cl. 19.11.4.1 (Electrostatic discharges), Cl. 19.11.4.2 (Radiated fields), Cl. 19.11.4.3 (Fast transient bursts), Cl. 19.11.4.4 (Surge immunity test), Cl. 19.11.4.5 (Immunity to conducted discharges), Cl. 19.11.4.6 (Class 3 Voltage dips and interruptions), Cl. 19.11.4.7 (Harmonics), Cl. 24 (Components) "(1)Cooking ranges, hobs, ovens and similar appliances, (2)Commercial Dispensing Appliances and Vending Machines, (3) spin extractors (For testing charges please refer relevant Part 2 standard in LIMS)"

9396

Quality Testing & Research Lab, Gautam Buddha Nagar

8184006

IS 1989 : Part 2 (1986)

Specification for leather safety boots and shoes: Part 2 for heavy metal industries (Fourth Revision)

64600 View breakup
-

Clause No.	Exclusion	Remark
4(Marking)	-	-
7(Design)	-	-
8(a) Upper Leather)	-	-
8(b) Lining Leather)	-	-
8(c) Bottom Material)	-	-
8(d) Steel Toe Cap)	-	-
8(e) Tape)	-	-
8(f) Bottom Filling)	-	-
8(g) Eyelet)	-	-
8(h) Toe Compound)	-	-
8(i) Threads)	-	-
8(j) Rivets)	-	-
8(k) Screw Wire)	-	-
8(l) Heel Pin)	-	-
8(m) Shank)	-	-
8(n) Laces)	-	-
8(o) Tongue Lining)	-	-
8(p) Adhesive)	-	-
8(q) Strengthening Piece)	-	-
8(r) Leather Components)	-	-
9(Manufacture)	-	-
10(Finish)	-	-
11(a) Boots with Leather Sole and Heel)	-	-
11(b) Boots with Rubber Sole and Heel)	-	-
12(Performance Test)	-	-
13(Design)	-	-
14(a) Upper Leather)	-	-
14(b) Lining Leather)	-	-
14(c) Bottom Material)	-	-
14(d) Steel Toe Cap)	-	-
14(e) Tape)	-	-
14(f) Bottom Filling)	-	-
14(g) Eyelet)	-	-
14(h) Toe Compound)	-	-
14(i) Threads)	-	-
14(j) Rivets)	-	-
14(k) Screw Wire)	-	-
14(l) Heel Pin)	-	-
14(m) Shank)	-	-
14(n) Laces)	-	-
14(o) Tongue Lining)	-	-
14(p) Adhesive)	-	-
14(q) Leather Components)	-	-
15(Manufacture)	-	-
16(Finish)	-	-
17(a) Shoes with Leather Sole and Heel)	-	-
17(b) Shoes with Rubber Sole and Heel)	-	-
18(Performance Test)	-	-
4(Marking)	-	-
7(Design)	-	-
8(a) Upper Leather)	-	-
8(b) Lining Leather)	-	-
8(c) Bottom Material)	-	-
8(d) Steel Toe Cap)	-	-
8(e) Tape)	-	-
8(f) Bottom Filling)	-	-
8(g) Eyelet)	-	-
8(h) Toe Compound)	-	-
8(i) Threads)	-	-
8(j) Rivets)	-	-
8(k) Screw Wire)	-	-
8(l) Heel Pin)	-	-
8(m) Shank)	-	-
8(n) Laces)	-	-
8(o) Tongue Lining)	-	-
8(p) Adhesive)	-	-
8(q) Strengthening Piece)	-	-
8(r) Leather Components)	-	-
9(Manufacture)	-	-
10(Finish)	-	-
11(a) Boots with Leather Sole and Heel)	-	-
11(b) Boots with Rubber Sole and Heel)	-	-
12(Performance Test)	-	-
13(Design)	-	-
14(a) Upper Leather)	-	-
14(b) Lining Leather)	-	-
14(c) Bottom Material)	-	-
14(d) Steel Toe Cap)	-	-
14(e) Tape)	-	-
14(f) Bottom Filling)	-	-
14(g) Eyelet)	-	-
14(h) Toe Compound)	-	-
14(i) Threads)	-	-
14(j) Rivets)	-	-
14(k) Screw Wire)	-	-
14(l) Heel Pin)	-	-
14(m) Shank)	-	-
14(n) Laces)	-	-
14(o) Tongue Lining)	-	-
14(p) Adhesive)	-	-
14(q) Leather Components)	-	-
15(Manufacture)	-	-
16(Finish)	-	-
17(a) Shoes with Leather Sole and Heel)	-	-
17(b) Shoes with Rubber Sole and Heel)	-	-
18(Performance Test)	-	-
4(Marking)	-	-
7(Design)	-	-
8(a) Upper Leather)	-	-
8(b) Lining Leather)	-	-
8(c) Bottom Material)	-	-
8(d) Steel Toe Cap)	-	-
8(e) Tape)	-	-
8(f) Bottom Filling)	-	-
8(g) Eyelet)	-	-
8(h) Toe Compound)	-	-
8(i) Threads)	-	-
8(j) Rivets)	-	-
8(k) Screw Wire)	-	-
8(l) Heel Pin)	-	-
8(m) Shank)	-	-
8(n) Laces)	-	-
8(o) Tongue Lining)	-	-
8(p) Adhesive)	-	-
8(q) Strengthening Piece)	-	-
8(r) Leather Components)	-	-
9(Manufacture)	-	-
10(Finish)	-	-
11(a) Boots with Leather Sole and Heel)	-	-
11(b) Boots with Rubber Sole and Heel)	-	-
12(Performance Test)	-	-
13(Design)	-	-
14(a) Upper Leather)	-	-
14(b) Lining Leather)	-	-
14(c) Bottom Material)	-	-
14(d) Steel Toe Cap)	-	-
14(e) Tape)	-	-
14(f) Bottom Filling)	-	-
14(g) Eyelet)	-	-
14(h) Toe Compound)	-	-
14(i) Threads)	-	-
14(j) Rivets)	-	-
14(k) Screw Wire)	-	-
14(l) Heel Pin)	-	-
14(m) Shank)	-	-
14(n) Laces)	-	-
14(o) Tongue Lining)	-	-
14(p) Adhesive)	-	-
14(q) Leather Components)	-	-
15(Manufacture)	-	-
16(Finish)	-	-
17(a) Shoes with Leather Sole and Heel)	-	-
17(b) Shoes with Rubber Sole and Heel)	-	-
18(Performance Test)	-	-

23 Feb, 2028

-
-

9397

The Synthetic and Art Silk Mills' Research Association (SASMIRA), MUMBAI

7175004

IS 16390 (2015)

Agro textiles - Nylon knitted seamless gloves for tobacco harvesters - Specification

8200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Yarn)	-	400	-
4.2(Gloves)	-	1000	-
4.2.1(The gloves shall be of the design)	-	400	-
4.3(Freedom from Defects)	-	500	-
5.1(Dimensions and Mass)	-	1200	-
5.2(Wales and Courses)	-	1000	-
5.3(The gloves shall also conform)	-	2300	-
5.4(Sealed Sample)	-	0	-
5.4.1(The custody of the sealed)	-	0	-
6.1(The gloves shall be matched and paired)	-	200	-
6.1.1(difference of 1.0 cm in the overall length permissible while pairin Quantitative)	-	200	-
9.1(Lot)	-	0	-
9.2(Unless otherwise)	-	1000	-
4.1(Yarn)	-	0	-
4.2(Gloves)	-	0	-
4.3(Freedom from Defects)	-	0	-
5.1(Dimensions and Mass)	-	0	-
5.2(Wales and Courses)	-	0	-
5.3(The gloves shall also conform)	-	0	-
5.4(Sealed Sample)	-	0	-
6.1(The gloves shall be matched and paired)	-	0	-
9.1.1(The conformity of the lot)	-	0	-

14 Dec, 2026

-
a) Equipment for, crimp rigidity, Glove finger dexterity is not adequate.

9398

URS PRODUCTS AND TESTING PVT. LTD. (A29), NOIDA

8168906

IS 302 : Part 2 : Sec 76 (1999)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 76 electric fence energizers

150000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.6.1 OF IS:302-1:2008(Classification)	-	2500	-
Cl.6.2 OF IS:302-1:2008(Classification)	-	2500	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	200	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	200	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	200	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	200	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	200	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	200	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	200	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	200	-
Cl.7(Marking and Instructions)	-	200	-
Cl.7(Marking and Instructions)	-	200	-
Cl.7(Marking and Instructions)	-	200	-
Cl.7.2(Marking and Instructions)	-	200	-
Cl.7.3(Marking and Instructions)	-	200	-
Cl.7.3(Marking and Instructions)	-	200	-
Cl.7.3(Marking and Instructions)	-	200	-
Cl.7.4(Marking and Instructions)	-	200	-
Cl.7.5(Marking and Instructions)	-	200	-
Cl.7.6 & IS:302-1:2008(Marking and Instructions)	-	200	-
Cl.7.8 of IS :302-1:2008(Marking and Instructions)	-	200	-
Cl.7.9 of IS :302-1:2008(Marking and Instructions)	-	200	-
Cl.7.10 of IS :302-1:2008(Marking and Instructions)	-	200	-
Cl.7.11 of IS :302-1:2008(Marking and Instructions)	-	200	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	200	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	200	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	200	-
Cl.7.12.2 OF IS:302-1:2008(Marking and Instructions)	-	200	-
Cl.7.12.3 & IS:302-1:2008(Marking and Instructions)	-	200	-
Cl.7.12.4 OF IS:302-1:2008(Marking and Instructions)	-	200	-
Cl.7.12.5 OF IS:302-1:2008(Marking and Instructions)	-	200	-
Cl.7.12.6 OF IS:302-1:2008(Marking and Instructions)	-	200	-
Cl.7.12.7 OF IS:302-1:2008(Marking and Instructions)	-	200	-
Cl.7.12.8 OF IS:302-1:2008(Marking and Instructions)	-	200	-
Cl.7.13 of IS 302-1:2008(Marking and Instructions)	-	200	-
Cl.7.14 of IS302-1:2008(Marking and Instructions)	-	200	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	200	-
Cl.7.16 of IS 302-1:2008(Marking and Instructions)	-	200	-
Cl.7.101(Marking and Instructions)	-	200	-
Cl.7.102(Marking and Instructions)	-	200	-
Cl.8.1 OF IS:302-1:2008(Protection Against Access to Live Parts)	-	500	-
Cl.8.1.1 OF IS:302-1:2008(Protection Against Access to Live Parts)	-	500	-
Cl.8.1.2 OF IS:302-1:2008(Protection Against Access to Live Parts)	-	500	-
Cl.8.1.3 OF IS:302-1:2008(Protection Against Access to Live Parts)	-	500	-
Cl.8.1.4 OF IS:302-1:2008(Protection Against Access to Live Parts)	-	500	-
Cl.8.1.5 OF IS:302-1:2008(Protection Against Access to Live Parts)	-	500	-
Cl.8.2 OF IS:302-1:2008(Protection Against Access to Live Parts)	-	500	-
Cl.10.1 OF IS:302-1:2008(Power Input and Current)	-	6000	-
Cl.11.2 OF IS:302-1:2008(Heating)	-	1000	-
Cl.11.3 OF IS:302-1:2008(Heating)	-	1000	-
Cl.11.4 OF IS:302-1:2008(Heating)	-	1000	-
Cl.11.5 OF IS:302-1:2008(Heating)	-	1000	-
Cl.11.5 OF IS:302-1:2008(Heating)	-	1000	-
Cl.11.6 OF IS:302-1:2008(Heating)	-	1000	-
Cl.11.7 OF IS:302-1:2008(Heating)	-	1000	-
Cl.11.8 OF IS:302-1:2008(Heating)	-	1000	-
Cl.13.1 OF IS:302-1:2008(Leakage Current & Electric Strength at operating temp.)	-	2000	-
Cl.13.2 OF IS:302-1:2008(Leakage Current & Electric Strength at operating temp.)	-	2000	-
Cl.13.3 OF IS:302-1:2008(Leakage Current & Electric Strength at operating temp.)	-	2000	-
Cl.14.101 OF IS:302-1:2008(TRANSIENT OVERVOLTAGE)	-	16000	-
Cl.15 OF IS: 302-1:2008(Moisture Resistance)	-	7500	-
Cl.15.3 of IS 302-1:200(Moisture Resistance)	-	7500	-
Cl.16.1 OF IS:302-1:2008(Leakage Current & Electric Strength)	-	1000	-
Cl.16.2 OF IS:302-1:2008(Leakage Current & Electric Strength)	-	1000	-
Cl.16.3 OF IS:302-1:2008(Leakage Current & Electric Strength)	-	1000	-
Cl.16.101 OF IS:302-1:2008(Leakage Current & Electric Strength)	-	1000	-
Cl.16.102 OF IS:302-1:2008(Leakage Current & Electric Strength)	-	1000	-
Cl.18(Endurance.)	-	6000	-
Cl.19.1 OF IS:302-1:2008(Abnormal Operation.)	-	1000	-
Cl.19.11 OF IS:302-1:2008(Abnormal Operation.)	-	1000	-
Cl.19 OF IS:302-1:2008(Abnormal Operation.)	-	1000	-
Cl.19 OF IS:302-1:2008(Abnormal Operation.)	-	1000	-
Cl.19.101(Abnormal Operation.)	-	1000	-
Cl.19.102(Abnormal Operation.)	-	1000	-
Cl.19.103(Abnormal Operation.)	-	1000	-
Cl.19.104(Abnormal Operation.)	-	1000	-
Cl.19.105(Abnormal Operation.)	-	1000	-
Cl.19.106(Abnormal Operation.)	-	1000	-
Cl.21 & IS:302-1:2008)(Mechanical Strength.)	-	1000	-
Cl.21.2 of IS 302-1:2008(Mechanical Strength.)	-	1500	-
Cl.21.101(Mechanical Strength.)	-	1500	-
Cl.22.1 of IS 302-1:2008(Construction)	-	1500	-
Cl.22.2 of IS 302-1:2008(Construction)	-	200	-
Cl.22.3 of IS 302-1:2008(Construction)	-	200	-
Cl.22.4 of IS 302-1:2008(Construction)	-	200	-
Cl.22.5 of IS 302-1:2008(Construction)	-	200	-
Cl.22.6 of IS 302-1:2008(Construction)	-	200	-
Cl.22.7 of IS 302-1:2008(Construction)	-	200	-
Cl.22.8 of IS 302-1:2008(Construction)	-	200	-
Cl.22.9 of IS 302-1:2008(Construction)	-	200	-
Cl.22.10 of IS 302-1:2008(Construction)	-	200	-
Cl.22.11(Construction)	-	200	-
Cl.22.12 of IS 302-1:2008(Construction)	-	200	-
Cl.22.13 of IS 302-1:2008(Construction)	-	200	-
Cl.22.14 of IS 302-1:2008(Construction)	-	200	-
Cl.22.15 of IS 302-1:2008(Construction)	-	200	-
Cl.22.16 of IS 302-1:2008(Construction)	-	200	-
Cl.22.17of IS 302-1:2008(Construction)	-	200	-
Cl.22.18 of IS 302-1:2008(Construction)	-	200	-
Cl.22.19 of IS 302-1:2008(Construction)	-	200	-
Cl.22.20 of IS 302-1:2008(Construction)	-	200	-
Cl.22.21 of IS 302-1:2008(Construction)	-	200	-
Cl.22.22 of IS 302-1:2008(Construction)	-	200	-
Cl.22.23 of IS 302-1:2008(Construction)	-	200	-
Cl.22.24 of IS 302-1:2008(Construction)	-	200	-
Cl.22.25 of IS 302-1:2008(Construction)	-	200	-
Cl.22.26 of IS 302-1:2008(Construction)	-	200	-
Cl.22.27 of IS 302-1:2008(Construction)	-	200	-
Cl.22.28 of IS 302-1:2008(Construction)	-	200	-
Cl.22.29 of IS 302-1:2008(Construction)	-	200	-
Cl.22.31 of IS 302-1:2008(Construction)	-	200	-
Cl.22.32 of IS 302-1:2008(Construction)	-	200	-
Cl.22.33 of IS 302-1:2008(Construction)	-	200	-
Cl.22.34 of IS 302-1:2008(Construction)	-	200	-
Cl.22.35 of IS 302-1:2008(Construction)	-	200	-
Cl.22.36 of IS 302-1:2008(Construction)	-	200	-
Cl.22.37 of IS 302-1:2008(Construction)	-	200	-
Cl.22.38 of IS 302-1:2008(Construction)	-	200	-
Cl.22.41 of IS 302-1:2008(Construction)	-	200	-
Cl.22.42 of IS 302-1:2008(Construction)	-	200	-
Cl.22.43 of IS 302-1:2008(Construction)	-	200	-
Cl.22.44 of IS 302-1:2008(Construction)	-	200	-
Cl.22.45 of IS 302-1:2008(Construction)	-	200	-
Cl.22.46 of IS 302-1:2008(Construction)	-	200	-
Cl.22.47 of IS 302-1:2008(Construction)	-	200	-
Cl.22.48 of IS 302-1:2008(Construction)	-	200	-
Cl. 22.101(Construction)	-	200	-
Cl. 22.102(Construction)	-	200	-
Cl. 22.103(Construction)	-	200	-
Cl. 22.104(Construction)	-	200	-
Cl. 22.105(Construction)	-	200	-
Cl. 22.106(Construction)	-	200	-
Cl. 22.107(Construction)	-	200	-
Cl. 22.108(Construction)	-	200	-
Cl. 22.109(Construction)	-	200	-
Cl.23.1 of IS:302-1:2008(Internal Wiring)	-	300	-
Cl.23.2 of IS:302-1:2008(Internal Wiring)	-	300	-
Cl.23.3 of IS:302-1:2008(Internal Wiring)	-	300	-
Cl.23.4 of IS:302-1:2008(Internal Wiring)	-	300	-
Cl.23.5 of IS:302-1:2008(Internal Wiring)	-	300	-
Cl.23.6 of IS:302-1:2008(Internal Wiring)	-	300	-
Cl.23.7 of IS:302-1:2008(Internal Wiring)	-	300	-
Cl.23.8 of IS:302-1:2008(Internal Wiring)	-	300	-
Cl.23.9 of IS:302-1:2008(Internal Wiring)	-	300	-
Cl.23.10 of IS:302-1:2008(Internal Wiring)	-	300	-
Cl.24.1 of IS 302-1:2008(Components)	-	500	-
Cl.24.1.1 of IS 302-1:2008(Components)	-	500	-
Cl.24.1.2 of IS 302-1:2008(Components)	-	500	-
Cl.24.1.3 of IS 302-1:2008(Components)	-	500	-
Cl.24.1.4 of IS 302-1:2008(Components)	-	500	-
Cl.24.1.5 of IS 302-1:2008(Components)	-	500	-
Cl.24.1.6 of IS 302-1:2008(Components)	-	500	-
Cl.24.2 of IS 302-1:2008(Components)	-	500	-
Cl.24.3 of IS 302-1:2008(Components)	-	500	-
Cl.24.4 of IS 302-1:2008(Components)	-	500	-
Cl.24.5 of IS 302-1:2008(Components)	-	500	-
Cl.24.6 of IS 302-1:2008(Components)	-	500	-
Cl.25.1 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	300	-
Cl.25.1 -ADDITION(Supply Connection And External Flexible Cords)	-	300	-
Cl.25.2 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	300	-
Cl.25.3 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	300	-
Cl.25.4 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	300	-
Cl.25.5 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	300	-
Cl.25.6 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	300	-
Cl.25.7 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	300	-
Cl.25.8 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	300	-
Cl.25.9 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	300	-
Cl.25.10 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	300	-
Cl.25.11 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	300	-
Cl.25.12 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	300	-
Cl.25.13 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	300	-
Cl.25.14 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	300	-
Cl.25.15 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	300	-
Cl.25.16 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	300	-
Cl.25.17 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	300	-
Cl.25.18 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	300	-
Cl.25.19 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	300	-
Cl.25.20 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	300	-
Cl.25.21 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	300	-
Cl.25.22 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	300	-
Cl.25.23 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	300	-
Cl.25.24 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	300	-
Cl.25.25 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	300	-
Cl.26.1 of IS 302-1:2008(Terminals for external conductors)	-	500	-
Cl.26.2 of IS 302-1:2008(Terminals for external conductors)	-	500	-
Cl.26.3 of IS 302-1:2008(Terminals for external conductors)	-	500	-
Cl.26.4 of IS 302-1:2008(Terminals for external conductors)	-	500	-
Cl.26.5 of IS 302-1:2008(Terminals for external conductors)	-	500	-
Cl.26.6 of IS 302-1:2008(Terminals for external conductors)	-	500	-
Cl.26.7 of IS 302-1:2008(Terminals for external conductors)	-	500	-
Cl.26.8 of IS 302-1:2008(Terminals for external conductors)	-	500	-
Cl.26.9 of IS 302-1:2008(Terminals for external conductors)	-	500	-
Cl.26.10 of IS 302-1:2008(Terminals for external conductors)	-	500	-
Cl.26.11 of IS 302-1:2008(Terminals for external conductors)	-	500	-
Cl.26.101(Terminals for external conductors)	-	500	-
Cl.26.102(Terminals for external conductors)	-	500	-
Cl.26.103(Terminals for external conductors)	-	500	-
Cl.27.1 of IS 302-1:2008(Provision For Earthing)	-	500	-
Cl.27.2 of IS 302-1:2008(Provision For Earthing)	-	500	-
Cl.27.3 of IS 302-1:2008(Provision For Earthing)	-	500	-
Cl.27.4 of IS 302-1:2008(Provision For Earthing)	-	500	-
Cl.27.5 of IS 302-1:2008(Provision For Earthing)	-	500	-
Cl.27.6 of IS 302-1:2008(Provision For Earthing)	-	500	-
Cl.28.1 of IS 302-1:2008(Screws and connections)	-	500	-
Cl.28.2 of IS 302-1:2008(Screws and connections)	-	500	-
Cl.28.3 of IS 302-1:2008(Screws and connections)	-	500	-
Cl.28.4 of IS 302-1:2008(Screws and connections)	-	500	-
CL.29 of IS 302-1:2008("Clearances, Creepage distances and solid insulation")	-	1000	-
CL.29.1 of IS 302-1:2008("Clearances, Creepage distances and solid insulation")	-	1000	-
CL.29.2 of IS 302-1:2008("Clearances, Creepage distances and solid insulation")	-	1000	-
CL.29.3 of IS 302-1:2008("Clearances, Creepage distances and solid insulation")	-	1000	-
CL.30.1 of IS 302-1:2008(Resistance to heat and fire)	-	2000	-
CL.30.2 of IS 302-1:2008(Resistance to heat and fire)	-	2000	-
CL.30.2.1 of IS 302-1:2008(Resistance to heat and fire)	-	2000	-
CL.30.2.2 of IS 302-1:2008(Resistance to heat and fire)	-	2000	-
CL.30.2.3 of IS 302-1:2008(Resistance to heat and fire)	-	2000	-
CL.30.2.4 of IS 302-1:2008(Resistance to heat and fire)	-	2000	-
CL.31 of IS 302-1:2008(Resistance to Rusting)	-	1000	-
CL.32 of IS 302-1:2008(Radiation, toxicity and similar hazards)	-	1000	-
CL. 1.1(VOLTAGE)	-	1000	-
Cl.22.39 of IS 302-1:2008(Construction)	-	200	-
Cl.22.40 of IS 302-1:2008(Construction)	-	200	-
Cl.6.1 OF IS:302-1:2008(Classification)	-	0	-
Cl.6.2 OF IS:302-1:2008(Classification)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7(Marking and Instructions)	-	0	-
Cl.7(Marking and Instructions)	-	0	-
Cl.7(Marking and Instructions)	-	0	-
Cl.7.2(Marking and Instructions)	-	0	-
Cl.7.3(Marking and Instructions)	-	0	-
Cl.7.3(Marking and Instructions)	-	0	-
Cl.7.3(Marking and Instructions)	-	0	-
Cl.7.4(Marking and Instructions)	-	0	-
Cl.7.5(Marking and Instructions)	-	0	-
Cl.7.6 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.8 of IS :302-1:2008(Marking and Instructions)	-	0	-
Cl.7.9 of IS :302-1:2008(Marking and Instructions)	-	0	-
Cl.7.10 of IS :302-1:2008(Marking and Instructions)	-	0	-
Cl.7.11 of IS :302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.2 OF IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.3 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.4 OF IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.5 OF IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.6 OF IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.7 OF IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.8 OF IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.13 of IS 302-1:2008(Marking and Instructions)	-	0	-
Cl.7.14 of IS302-1:2008(Marking and Instructions)	-	0	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	0	-
Cl.7.16 of IS 302-1:2008(Marking and Instructions)	-	0	-
Cl.7.101(Marking and Instructions)	-	0	-
Cl.7.102(Marking and Instructions)	-	0	-
Cl.8.1 OF IS:302-1:2008(Protection Against Access to Live Parts)	-	0	-
Cl.8.1.1 OF IS:302-1:2008(Protection Against Access to Live Parts)	-	0	-
Cl.8.1.2 OF IS:302-1:2008(Protection Against Access to Live Parts)	-	0	-
Cl.8.1.3 OF IS:302-1:2008(Protection Against Access to Live Parts)	-	0	-
Cl.8.1.4 OF IS:302-1:2008(Protection Against Access to Live Parts)	-	0	-
Cl.8.1.5 OF IS:302-1:2008(Protection Against Access to Live Parts)	-	0	-
Cl.8.2 OF IS:302-1:2008(Protection Against Access to Live Parts)	-	0	-
Cl.10.1 OF IS:302-1:2008(Power Input and Current)	-	0	-
Cl.11.2 OF IS:302-1:2008(Heating)	-	0	-
Cl.11.3 OF IS:302-1:2008(Heating)	-	0	-
Cl.11.4 OF IS:302-1:2008(Heating)	-	0	-
Cl.11.5 OF IS:302-1:2008(Heating)	-	0	-
Cl.11.5 OF IS:302-1:2008(Heating)	-	0	-
Cl.11.6 OF IS:302-1:2008(Heating)	-	0	-
Cl.11.7 OF IS:302-1:2008(Heating)	-	0	-
Cl.11.8 OF IS:302-1:2008(Heating)	-	0	-
Cl.13.1 OF IS:302-1:2008(Leakage Current & Electric Strength at operating temp.)	-	0	-
Cl.13.2 OF IS:302-1:2008(Leakage Current & Electric Strength at operating temp.)	-	0	-
Cl.13.3 OF IS:302-1:2008(Leakage Current & Electric Strength at operating temp.)	-	0	-
Cl.14.101 OF IS:302-1:2008(TRANSIENT OVERVOLTAGE)	-	0	-
Cl.15 OF IS: 302-1:2008(Moisture Resistance)	-	0	-
Cl.15.3 of IS 302-1:200(Moisture Resistance)	-	0	-
Cl.16.1 OF IS:302-1:2008(Leakage Current & Electric Strength)	-	0	-
Cl.16.2 OF IS:302-1:2008(Leakage Current & Electric Strength)	-	0	-
Cl.16.3 OF IS:302-1:2008(Leakage Current & Electric Strength)	-	0	-
Cl.16.101 OF IS:302-1:2008(Leakage Current & Electric Strength)	-	0	-
Cl.16.102 OF IS:302-1:2008(Leakage Current & Electric Strength)	-	0	-
Cl.18(Endurance.)	-	0	-
Cl.19.1 OF IS:302-1:2008(Abnormal Operation.)	-	0	-
Cl.19.11 OF IS:302-1:2008(Abnormal Operation.)	-	0	-
Cl.19 OF IS:302-1:2008(Abnormal Operation.)	-	0	-
Cl.19 OF IS:302-1:2008(Abnormal Operation.)	-	0	-
Cl.19.101(Abnormal Operation.)	-	0	-
Cl.19.102(Abnormal Operation.)	-	0	-
Cl.19.103(Abnormal Operation.)	-	0	-
Cl.19.104(Abnormal Operation.)	-	0	-
Cl.19.105(Abnormal Operation.)	-	0	-
Cl.19.106(Abnormal Operation.)	-	0	-
Cl.21 & IS:302-1:2008)(Mechanical Strength.)	-	0	-
Cl.21.2 of IS 302-1:2008(Mechanical Strength.)	-	0	-
Cl.21.101(Mechanical Strength.)	-	0	-
Cl.22.1 of IS 302-1:2008(Construction)	-	0	-
Cl.22.2 of IS 302-1:2008(Construction)	-	0	-
Cl.22.3 of IS 302-1:2008(Construction)	-	0	-
Cl.22.4 of IS 302-1:2008(Construction)	-	0	-
Cl.22.5 of IS 302-1:2008(Construction)	-	0	-
Cl.22.6 of IS 302-1:2008(Construction)	-	0	-
Cl.22.7 of IS 302-1:2008(Construction)	-	0	-
Cl.22.8 of IS 302-1:2008(Construction)	-	0	-
Cl.22.9 of IS 302-1:2008(Construction)	-	0	-
Cl.22.10 of IS 302-1:2008(Construction)	-	0	-
Cl.22.11(Construction)	-	0	-
Cl.22.12 of IS 302-1:2008(Construction)	-	0	-
Cl.22.13 of IS 302-1:2008(Construction)	-	0	-
Cl.22.14 of IS 302-1:2008(Construction)	-	0	-
Cl.22.15 of IS 302-1:2008(Construction)	-	0	-
Cl.22.16 of IS 302-1:2008(Construction)	-	0	-
Cl.22.17of IS 302-1:2008(Construction)	-	0	-
Cl.22.18 of IS 302-1:2008(Construction)	-	0	-
Cl.22.19 of IS 302-1:2008(Construction)	-	0	-
Cl.22.20 of IS 302-1:2008(Construction)	-	0	-
Cl.22.21 of IS 302-1:2008(Construction)	-	0	-
Cl.22.22 of IS 302-1:2008(Construction)	-	0	-
Cl.22.23 of IS 302-1:2008(Construction)	-	0	-
Cl.22.24 of IS 302-1:2008(Construction)	-	0	-
Cl.22.25 of IS 302-1:2008(Construction)	-	0	-
Cl.22.26 of IS 302-1:2008(Construction)	-	0	-
Cl.22.27 of IS 302-1:2008(Construction)	-	0	-
Cl.22.28 of IS 302-1:2008(Construction)	-	0	-
Cl.22.29 of IS 302-1:2008(Construction)	-	0	-
Cl.22.31 of IS 302-1:2008(Construction)	-	0	-
Cl.22.32 of IS 302-1:2008(Construction)	-	0	-
Cl.22.33 of IS 302-1:2008(Construction)	-	0	-
Cl.22.34 of IS 302-1:2008(Construction)	-	0	-
Cl.22.35 of IS 302-1:2008(Construction)	-	0	-
Cl.22.36 of IS 302-1:2008(Construction)	-	0	-
Cl.22.37 of IS 302-1:2008(Construction)	-	0	-
Cl.22.38 of IS 302-1:2008(Construction)	-	0	-
Cl.22.41 of IS 302-1:2008(Construction)	-	0	-
Cl.22.42 of IS 302-1:2008(Construction)	-	0	-
Cl.22.43 of IS 302-1:2008(Construction)	-	0	-
Cl.22.44 of IS 302-1:2008(Construction)	-	0	-
Cl.22.45 of IS 302-1:2008(Construction)	-	0	-
Cl.22.46 of IS 302-1:2008(Construction)	-	0	-
Cl.22.47 of IS 302-1:2008(Construction)	-	0	-
Cl.22.48 of IS 302-1:2008(Construction)	-	0	-
Cl. 22.101(Construction)	-	0	-
Cl. 22.102(Construction)	-	0	-
Cl. 22.103(Construction)	-	0	-
Cl. 22.104(Construction)	-	0	-
Cl. 22.105(Construction)	-	0	-
Cl. 22.106(Construction)	-	0	-
Cl. 22.107(Construction)	-	0	-
Cl. 22.108(Construction)	-	0	-
Cl. 22.109(Construction)	-	0	-
Cl.23.1 of IS:302-1:2008(Internal Wiring)	-	0	-
Cl.23.2 of IS:302-1:2008(Internal Wiring)	-	0	-
Cl.23.3 of IS:302-1:2008(Internal Wiring)	-	0	-
Cl.23.4 of IS:302-1:2008(Internal Wiring)	-	0	-
Cl.23.5 of IS:302-1:2008(Internal Wiring)	-	0	-
Cl.23.6 of IS:302-1:2008(Internal Wiring)	-	0	-
Cl.23.7 of IS:302-1:2008(Internal Wiring)	-	0	-
Cl.23.8 of IS:302-1:2008(Internal Wiring)	-	0	-
Cl.23.9 of IS:302-1:2008(Internal Wiring)	-	0	-
Cl.23.10 of IS:302-1:2008(Internal Wiring)	-	0	-
Cl.24.1 of IS 302-1:2008(Components)	-	0	-
Cl.24.1.1 of IS 302-1:2008(Components)	-	0	-
Cl.24.1.2 of IS 302-1:2008(Components)	-	0	-
Cl.24.1.3 of IS 302-1:2008(Components)	-	0	-
Cl.24.1.4 of IS 302-1:2008(Components)	-	0	-
Cl.24.1.5 of IS 302-1:2008(Components)	-	0	-
Cl.24.1.6 of IS 302-1:2008(Components)	-	0	-
Cl.24.2 of IS 302-1:2008(Components)	-	0	-
Cl.24.3 of IS 302-1:2008(Components)	-	0	-
Cl.24.4 of IS 302-1:2008(Components)	-	0	-
Cl.24.5 of IS 302-1:2008(Components)	-	0	-
Cl.24.6 of IS 302-1:2008(Components)	-	0	-
Cl.25.1 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.1 -ADDITION(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.2 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.3 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.4 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.5 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.6 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.7 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.8 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.9 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.10 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.11 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.12 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.13 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.14 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.15 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.16 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.17 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.18 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.19 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.20 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.21 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.22 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.23 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.24 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.25 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.26.1 of IS 302-1:2008(Terminals for external conductors)	-	0	-
Cl.26.2 of IS 302-1:2008(Terminals for external conductors)	-	0	-
Cl.26.3 of IS 302-1:2008(Terminals for external conductors)	-	0	-
Cl.26.4 of IS 302-1:2008(Terminals for external conductors)	-	0	-
Cl.26.5 of IS 302-1:2008(Terminals for external conductors)	-	0	-
Cl.26.6 of IS 302-1:2008(Terminals for external conductors)	-	0	-
Cl.26.7 of IS 302-1:2008(Terminals for external conductors)	-	0	-
Cl.26.8 of IS 302-1:2008(Terminals for external conductors)	-	0	-
Cl.26.9 of IS 302-1:2008(Terminals for external conductors)	-	0	-
Cl.26.10 of IS 302-1:2008(Terminals for external conductors)	-	0	-
Cl.26.11 of IS 302-1:2008(Terminals for external conductors)	-	0	-
Cl.26.101(Terminals for external conductors)	-	0	-
Cl.26.102(Terminals for external conductors)	-	0	-
Cl.26.103(Terminals for external conductors)	-	0	-
Cl.27.1 of IS 302-1:2008(Provision For Earthing)	-	0	-
Cl.27.2 of IS 302-1:2008(Provision For Earthing)	-	0	-
Cl.27.3 of IS 302-1:2008(Provision For Earthing)	-	0	-
Cl.27.4 of IS 302-1:2008(Provision For Earthing)	-	0	-
Cl.27.5 of IS 302-1:2008(Provision For Earthing)	-	0	-
Cl.27.6 of IS 302-1:2008(Provision For Earthing)	-	0	-
Cl.28.1 of IS 302-1:2008(Screws and connections)	-	0	-
Cl.28.2 of IS 302-1:2008(Screws and connections)	-	0	-
Cl.28.3 of IS 302-1:2008(Screws and connections)	-	0	-
Cl.28.4 of IS 302-1:2008(Screws and connections)	-	0	-
CL.29 of IS 302-1:2008("Clearances, Creepage distances and solid insulation")	-	0	-
CL.29.1 of IS 302-1:2008("Clearances, Creepage distances and solid insulation")	-	0	-
CL.29.2 of IS 302-1:2008("Clearances, Creepage distances and solid insulation")	-	0	-
CL.29.3 of IS 302-1:2008("Clearances, Creepage distances and solid insulation")	-	0	-
CL.30.1 of IS 302-1:2008(Resistance to heat and fire)	-	0	-
CL.30.2 of IS 302-1:2008(Resistance to heat and fire)	-	0	-
CL.30.2.1 of IS 302-1:2008(Resistance to heat and fire)	-	0	-
CL.30.2.2 of IS 302-1:2008(Resistance to heat and fire)	-	0	-
CL.30.2.3 of IS 302-1:2008(Resistance to heat and fire)	-	0	-
CL.30.2.4 of IS 302-1:2008(Resistance to heat and fire)	-	0	-
CL.31 of IS 302-1:2008(Resistance to Rusting)	-	0	-
CL.32 of IS 302-1:2008(Radiation, toxicity and similar hazards)	-	0	-
CL. 1.1(VOLTAGE)	-	0	-
Cl.22.39 of IS 302-1:2008(Construction)	-	0	-
Cl.22.40 of IS 302-1:2008(Construction)	-	0	-
Cl.14.102 OF IS:302-1:2008 (TRANSIENT OVERVOLTAGE)(TRANSIENT OVERVOLTAGE)	-	0	-
Cl.14.103 OF IS:302-1:2008 (TRANSIENT OVERVOLTAGE)(TRANSIENT OVERVOLTAGE)	-	0	-
Cl.14.104 OF IS:302-1:2008 (TRANSIENT OVERVOLTAGE)(TRANSIENT OVERVOLTAGE)	-	0	-
Cl.6.1 OF IS:302-1:2008(Classification)	-	0	-
Cl.6.2 OF IS:302-1:2008(Classification)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7(Marking and Instructions)	-	0	-
Cl.7(Marking and Instructions)	-	0	-
Cl.7(Marking and Instructions)	-	0	-
Cl.7.2(Marking and Instructions)	-	0	-
Cl.7.3(Marking and Instructions)	-	0	-
Cl.7.3(Marking and Instructions)	-	0	-
Cl.7.3(Marking and Instructions)	-	0	-
Cl.7.4(Marking and Instructions)	-	0	-
Cl.7.5(Marking and Instructions)	-	0	-
Cl.7.6 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.8 of IS :302-1:2008(Marking and Instructions)	-	0	-
Cl.7.9 of IS :302-1:2008(Marking and Instructions)	-	0	-
Cl.7.10 of IS :302-1:2008(Marking and Instructions)	-	0	-
Cl.7.11 of IS :302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.2 OF IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.3 & IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.4 OF IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.5 OF IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.6 OF IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.7 OF IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.12.8 OF IS:302-1:2008(Marking and Instructions)	-	0	-
Cl.7.13 of IS 302-1:2008(Marking and Instructions)	-	0	-
Cl.7.14 of IS302-1:2008(Marking and Instructions)	-	0	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	0	-
Cl.7.16 of IS 302-1:2008(Marking and Instructions)	-	0	-
Cl.7.101(Marking and Instructions)	-	0	-
Cl.7.102(Marking and Instructions)	-	0	-
Cl.8.1 OF IS:302-1:2008(Protection Against Access to Live Parts)	-	0	-
Cl.8.1.1 OF IS:302-1:2008(Protection Against Access to Live Parts)	-	0	-
Cl.8.1.2 OF IS:302-1:2008(Protection Against Access to Live Parts)	-	0	-
Cl.8.1.3 OF IS:302-1:2008(Protection Against Access to Live Parts)	-	0	-
Cl.8.1.4 OF IS:302-1:2008(Protection Against Access to Live Parts)	-	0	-
Cl.8.1.5 OF IS:302-1:2008(Protection Against Access to Live Parts)	-	0	-
Cl.8.2 OF IS:302-1:2008(Protection Against Access to Live Parts)	-	0	-
Cl.10.1 OF IS:302-1:2008(Power Input and Current)	-	0	-
Cl.11.2 OF IS:302-1:2008(Heating)	-	0	-
Cl.11.3 OF IS:302-1:2008(Heating)	-	0	-
Cl.11.4 OF IS:302-1:2008(Heating)	-	0	-
Cl.11.5 OF IS:302-1:2008(Heating)	-	0	-
Cl.11.5 OF IS:302-1:2008(Heating)	-	0	-
Cl.11.6 OF IS:302-1:2008(Heating)	-	0	-
Cl.11.7 OF IS:302-1:2008(Heating)	-	0	-
Cl.11.8 OF IS:302-1:2008(Heating)	-	0	-
Cl.13.1 OF IS:302-1:2008(Leakage Current & Electric Strength at operating temp.)	-	0	-
Cl.13.2 OF IS:302-1:2008(Leakage Current & Electric Strength at operating temp.)	-	0	-
Cl.13.3 OF IS:302-1:2008(Leakage Current & Electric Strength at operating temp.)	-	0	-
Cl.14.101 OF IS:302-1:2008(TRANSIENT OVERVOLTAGE)	-	0	-
Cl.15 OF IS: 302-1:2008(Moisture Resistance)	-	0	-
Cl.15.3 of IS 302-1:200(Moisture Resistance)	-	0	-
Cl.16.1 OF IS:302-1:2008(Leakage Current & Electric Strength)	-	0	-
Cl.16.2 OF IS:302-1:2008(Leakage Current & Electric Strength)	-	0	-
Cl.16.3 OF IS:302-1:2008(Leakage Current & Electric Strength)	-	0	-
Cl.16.101 OF IS:302-1:2008(Leakage Current & Electric Strength)	-	0	-
Cl.16.102 OF IS:302-1:2008(Leakage Current & Electric Strength)	-	0	-
Cl.18(Endurance.)	-	0	-
Cl.19.1 OF IS:302-1:2008(Abnormal Operation.)	-	0	-
Cl.19.11 OF IS:302-1:2008(Abnormal Operation.)	-	0	-
Cl.19 OF IS:302-1:2008(Abnormal Operation.)	-	0	-
Cl.19 OF IS:302-1:2008(Abnormal Operation.)	-	0	-
Cl.19.101(Abnormal Operation.)	-	0	-
Cl.19.102(Abnormal Operation.)	-	0	-
Cl.19.103(Abnormal Operation.)	-	0	-
Cl.19.104(Abnormal Operation.)	-	0	-
Cl.19.105(Abnormal Operation.)	-	0	-
Cl.19.106(Abnormal Operation.)	-	0	-
Cl.21 & IS:302-1:2008)(Mechanical Strength.)	-	0	-
Cl.21.2 of IS 302-1:2008(Mechanical Strength.)	-	0	-
Cl.21.101(Mechanical Strength.)	-	0	-
Cl.22.1 of IS 302-1:2008(Construction)	-	0	-
Cl.22.2 of IS 302-1:2008(Construction)	-	0	-
Cl.22.3 of IS 302-1:2008(Construction)	-	0	-
Cl.22.4 of IS 302-1:2008(Construction)	-	0	-
Cl.22.5 of IS 302-1:2008(Construction)	-	0	-
Cl.22.6 of IS 302-1:2008(Construction)	-	0	-
Cl.22.7 of IS 302-1:2008(Construction)	-	0	-
Cl.22.8 of IS 302-1:2008(Construction)	-	0	-
Cl.22.9 of IS 302-1:2008(Construction)	-	0	-
Cl.22.10 of IS 302-1:2008(Construction)	-	0	-
Cl.22.11(Construction)	-	0	-
Cl.22.12 of IS 302-1:2008(Construction)	-	0	-
Cl.22.13 of IS 302-1:2008(Construction)	-	0	-
Cl.22.14 of IS 302-1:2008(Construction)	-	0	-
Cl.22.15 of IS 302-1:2008(Construction)	-	0	-
Cl.22.16 of IS 302-1:2008(Construction)	-	0	-
Cl.22.17of IS 302-1:2008(Construction)	-	0	-
Cl.22.18 of IS 302-1:2008(Construction)	-	0	-
Cl.22.19 of IS 302-1:2008(Construction)	-	0	-
Cl.22.20 of IS 302-1:2008(Construction)	-	0	-
Cl.22.21 of IS 302-1:2008(Construction)	-	0	-
Cl.22.22 of IS 302-1:2008(Construction)	-	0	-
Cl.22.23 of IS 302-1:2008(Construction)	-	0	-
Cl.22.24 of IS 302-1:2008(Construction)	-	0	-
Cl.22.25 of IS 302-1:2008(Construction)	-	0	-
Cl.22.26 of IS 302-1:2008(Construction)	-	0	-
Cl.22.27 of IS 302-1:2008(Construction)	-	0	-
Cl.22.28 of IS 302-1:2008(Construction)	-	0	-
Cl.22.29 of IS 302-1:2008(Construction)	-	0	-
Cl.22.31 of IS 302-1:2008(Construction)	-	0	-
Cl.22.32 of IS 302-1:2008(Construction)	-	0	-
Cl.22.33 of IS 302-1:2008(Construction)	-	0	-
Cl.22.34 of IS 302-1:2008(Construction)	-	0	-
Cl.22.35 of IS 302-1:2008(Construction)	-	0	-
Cl.22.36 of IS 302-1:2008(Construction)	-	0	-
Cl.22.37 of IS 302-1:2008(Construction)	-	0	-
Cl.22.38 of IS 302-1:2008(Construction)	-	0	-
Cl.22.41 of IS 302-1:2008(Construction)	-	0	-
Cl.22.42 of IS 302-1:2008(Construction)	-	0	-
Cl.22.43 of IS 302-1:2008(Construction)	-	0	-
Cl.22.44 of IS 302-1:2008(Construction)	-	0	-
Cl.22.45 of IS 302-1:2008(Construction)	-	0	-
Cl.22.46 of IS 302-1:2008(Construction)	-	0	-
Cl.22.47 of IS 302-1:2008(Construction)	-	0	-
Cl.22.48 of IS 302-1:2008(Construction)	-	0	-
Cl. 22.101(Construction)	-	0	-
Cl. 22.102(Construction)	-	0	-
Cl. 22.103(Construction)	-	0	-
Cl. 22.104(Construction)	-	0	-
Cl. 22.105(Construction)	-	0	-
Cl. 22.106(Construction)	-	0	-
Cl. 22.107(Construction)	-	0	-
Cl. 22.108(Construction)	-	0	-
Cl. 22.109(Construction)	-	0	-
Cl.23.1 of IS:302-1:2008(Internal Wiring)	-	0	-
Cl.23.2 of IS:302-1:2008(Internal Wiring)	-	0	-
Cl.23.3 of IS:302-1:2008(Internal Wiring)	-	0	-
Cl.23.4 of IS:302-1:2008(Internal Wiring)	-	0	-
Cl.23.5 of IS:302-1:2008(Internal Wiring)	-	0	-
Cl.23.6 of IS:302-1:2008(Internal Wiring)	-	0	-
Cl.23.7 of IS:302-1:2008(Internal Wiring)	-	0	-
Cl.23.8 of IS:302-1:2008(Internal Wiring)	-	0	-
Cl.23.9 of IS:302-1:2008(Internal Wiring)	-	0	-
Cl.23.10 of IS:302-1:2008(Internal Wiring)	-	0	-
Cl.24.1 of IS 302-1:2008(Components)	-	0	-
Cl.24.1.1 of IS 302-1:2008(Components)	-	0	-
Cl.24.1.2 of IS 302-1:2008(Components)	-	0	-
Cl.24.1.3 of IS 302-1:2008(Components)	-	0	-
Cl.24.1.4 of IS 302-1:2008(Components)	-	0	-
Cl.24.1.5 of IS 302-1:2008(Components)	-	0	-
Cl.24.1.6 of IS 302-1:2008(Components)	-	0	-
Cl.24.2 of IS 302-1:2008(Components)	-	0	-
Cl.24.3 of IS 302-1:2008(Components)	-	0	-
Cl.24.4 of IS 302-1:2008(Components)	-	0	-
Cl.24.5 of IS 302-1:2008(Components)	-	0	-
Cl.24.6 of IS 302-1:2008(Components)	-	0	-
Cl.25.1 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.1 -ADDITION(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.2 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.3 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.4 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.5 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.6 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.7 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.8 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.9 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.10 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.11 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.12 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.13 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.14 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.15 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.16 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.17 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.18 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.19 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.20 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.21 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.22 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.23 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.24 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.25.25 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	0	-
Cl.26.1 of IS 302-1:2008(Terminals for external conductors)	-	0	-
Cl.26.2 of IS 302-1:2008(Terminals for external conductors)	-	0	-
Cl.26.3 of IS 302-1:2008(Terminals for external conductors)	-	0	-
Cl.26.4 of IS 302-1:2008(Terminals for external conductors)	-	0	-
Cl.26.5 of IS 302-1:2008(Terminals for external conductors)	-	0	-
Cl.26.6 of IS 302-1:2008(Terminals for external conductors)	-	0	-
Cl.26.7 of IS 302-1:2008(Terminals for external conductors)	-	0	-
Cl.26.8 of IS 302-1:2008(Terminals for external conductors)	-	0	-
Cl.26.9 of IS 302-1:2008(Terminals for external conductors)	-	0	-
Cl.26.10 of IS 302-1:2008(Terminals for external conductors)	-	0	-
Cl.26.11 of IS 302-1:2008(Terminals for external conductors)	-	0	-
Cl.26.101(Terminals for external conductors)	-	0	-
Cl.26.102(Terminals for external conductors)	-	0	-
Cl.26.103(Terminals for external conductors)	-	0	-
Cl.27.1 of IS 302-1:2008(Provision For Earthing)	-	0	-
Cl.27.2 of IS 302-1:2008(Provision For Earthing)	-	0	-
Cl.27.3 of IS 302-1:2008(Provision For Earthing)	-	0	-
Cl.27.4 of IS 302-1:2008(Provision For Earthing)	-	0	-
Cl.27.5 of IS 302-1:2008(Provision For Earthing)	-	0	-
Cl.27.6 of IS 302-1:2008(Provision For Earthing)	-	0	-
Cl.28.1 of IS 302-1:2008(Screws and connections)	-	0	-
Cl.28.2 of IS 302-1:2008(Screws and connections)	-	0	-
Cl.28.3 of IS 302-1:2008(Screws and connections)	-	0	-
Cl.28.4 of IS 302-1:2008(Screws and connections)	-	0	-
CL.29 of IS 302-1:2008("Clearances, Creepage distances and solid insulation")	-	0	-
CL.29.1 of IS 302-1:2008("Clearances, Creepage distances and solid insulation")	-	0	-
CL.29.2 of IS 302-1:2008("Clearances, Creepage distances and solid insulation")	-	0	-
CL.29.3 of IS 302-1:2008("Clearances, Creepage distances and solid insulation")	-	0	-
CL.30.1 of IS 302-1:2008(Resistance to heat and fire)	-	0	-
CL.30.2 of IS 302-1:2008(Resistance to heat and fire)	-	0	-
CL.30.2.1 of IS 302-1:2008(Resistance to heat and fire)	-	0	-
CL.30.2.2 of IS 302-1:2008(Resistance to heat and fire)	-	0	-
CL.30.2.3 of IS 302-1:2008(Resistance to heat and fire)	-	0	-
CL.30.2.4 of IS 302-1:2008(Resistance to heat and fire)	-	0	-
CL.31 of IS 302-1:2008(Resistance to Rusting)	-	0	-
CL.32 of IS 302-1:2008(Radiation, toxicity and similar hazards)	-	0	-
CL. 1.1(VOLTAGE)	-	0	-
Cl.22.39 of IS 302-1:2008(Construction)	-	0	-
Cl.22.40 of IS 302-1:2008(Construction)	-	0	-
Cl.14.102 OF IS:302-1:2008 (TRANSIENT OVERVOLTAGE)(TRANSIENT OVERVOLTAGE)	-	0	-
Cl.14.103 OF IS:302-1:2008 (TRANSIENT OVERVOLTAGE)(TRANSIENT OVERVOLTAGE)	-	0	-
Cl.14.104 OF IS:302-1:2008 (TRANSIENT OVERVOLTAGE)(TRANSIENT OVERVOLTAGE)	-	0	-

26 Sep, 2027

-
Included w.e.f. 26.07.2024 Exclusion: Cl.24 (Component), Cl.19.11.4 (EMI/EMC test)

9399

The Synthetic and Art Silk Mills' Research Association (SASMIRA), MUMBAI

7175004

IS 17371 (2020)

Geosynthetics – Geogrids for flexible pavements – Specification

236000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1("Ultimate tensile strength, (MD × CD)- IS 16635 30/30 40/40 50/50 60/60 80/80 100/100")	-	1500	-
1("Tensile strength at 2 percent strain, (MD × CD- IS 16635 20/20 30/30 40/40")	-	0	-
1("Tensile strength at 5 percent strain, (MD × CD- IS 16635 20/20 30/30 40/40")	-	0	-
1(UV resistance, strength retained after 500 h exposure- IS 13162 (part 2))	-	31500	-
1(Chemical resistance, strength retained after 72 h immersion- IS 17363)	-	5000	-
2("Ultimate tensile strength, (MD × CD)- IS 16635 20/20 30/30 40/40")	-	1500	-
2("Tensile strength at 2 percent strain, (MD × CD- IS 16635 20/20 30/30 40/40")	-	0	-
2("Tensile strength at 5 percent strain, (MD × CD- IS 16635 20/20 30/30 40/40")	-	0	-
2(UV resistance, strength retained after 500 h exposure- IS 13162 (part 2))	-	31500	-
2(Chemical resistance, strength retained after 72 h immersion- IS 17363)	-	5000	-
2("Junction strength- IS 17371 AnnexB 20/20 30/30 40/40")	-	1000	-
Clause No. 4.1(Geogrid Raw Materials)	-	1200	-
Clause No. 4.5(Identification of Geogrid)	-	500	-
Clause No. 5.2, Table No. 1 (ii)(Tensile strength at 2 percent strain, (MD × CD) kN/m of PET Geogrids)	-	1500	-
Clause No. 5.2, Table No. 1 (iii)(Tensile strength at 5 percent strain, (MD × CD) kN/m of PET Geogrids)	-	0	-
Clause No. 5.2, table No. 1 (iv)(UV resistance, strength retained after 500 h exposure of PET Geogrids)	-	31500	-
Clause No. 5.2, Table No. 1 (v)(Chemical resistance, strength retained after 72 h immersion of PET Geogrids)	-	5000	-
Clause No. 5.2, table No. 1 (vi)(Width of PET Geogrids)	-	200	-
Clause No. 5.2, Table No. 1 (vii)(Roll length of PET Geogrids)	-	200	-
Clause No. 5.2, Table No. 2 (i)(Ultimate tensile strength, (MD × CD) kN/m of PP Geogrids)	-	1500	-
Clause No. 5.2, Table No. 2 (ii)(Tensile strength at 2 percent strain, (MD × CD) kN/m of PP Geogrids)	-	0	-
Clause No. 5.2, Table No. 2 (iii)(Tensile strength at 5 percent strain, (MD × CD) kN/m of PP Geogrids)	-	0	-
Clause No. 5.2, table No. 2 (iv)(UV resistance, strength retained after 500 h exposure of PP Geogrids)	-	31500	-
Clause No. 5.2, Table No. 2 (v)(Chemical resistance, strength retained after 72 h immersion of PP Geogrids)	-	5000	-
Clause No. 5.2, Table No. 2 (vi)(Junction strength, percent strength of original strength)	-	1000	-
Clause No. 5.2, table No. 2 (vii)(Width of PP Geogrids)	-	200	-
Clause No. 5.2, Table No. 2 (viii)(Roll length of PP Geogrids)	-	200	-
4.1(MATERIALS - Geogrid materials shall be inert to all chemicals naturally found in commonly encountered soils not containing adverse solvents and at ambient temperatures)	-	1200	-
4.5(MATERIALS - Identification of Geogrid)	-	500	-
5.1(REQUIREMENTS FOR GEOGRIDS -Geogrids shall be dimensionally stable and able to retain their geometry under manufacture, transport, and installation)	-	0	-
5.2- Table 1- i)(REQUIREMENTS FOR PET GEOGRIDS - Ultimate tensile strength, (MD × CD) kN/m)	-	1500	-
5.2- Table 1- ii)(REQUIREMENTS FOR PET GEOGRIDS - Tensile strength at 2 percent strain, (MD × CD) kN/m,)	-	0	-
5.2- Table 1- iii)(REQUIREMENTS FOR PET GEOGRIDS - Tensile strength at 5 percent strain, (MD × CD) kN/m,)	-	0	-
5.2- Table 1- iv)(REQUIREMENTS FOR PET GEOGRIDS - UV resistance, strength retained after 500 h exposure)	-	31500	-
5.2- Table 1- v)(REQUIREMENTS FOR GEOGRIDS - Chemical resistance, strength retained after 72 h immersion)	-	5000	-
5.2- Table 1- vi)(REQUIREMENTS FOR PET GEOGRIDS - Width)	-	200	-
5.2- Table 1- vii)(REQUIREMENTS FOR PET GEOGRIDS - Roll length)	-	200	-
5.2- Table 2- i)(REQUIREMENTS FOR PP GEOGRIDS - Ultimate tensile strength, (MD × CD) kN/m)	-	1500	-
5.2- Table 2- ii)(REQUIREMENTS FOR PP GEOGRIDS - Tensile strength at 2 percent strain, (MD × CD) kN/m)	-	0	-
5.2- Table 2- iii)(REQUIREMENTS FOR PP GEOGRIDS - Tensile strength at 5 percent strain, (MD × CD) kN/m,)	-	0	-
5.2- Table 2- iv)(REQUIREMENTS FOR PP GEOGRIDS - UV resistance, strength retained after 500 h exposure)	-	31500	-
5.2- Table 2- v)(REQUIREMENTS FOR PP GEOGRIDS - Chemical resistance, strength retained after 72 h immersion)	-	5000	-
5.2- Table 2- vi)(REQUIREMENTS FOR PP GEOGRIDS - Junction strength, percent strength of original strength)	-	1000	-
5.2- Table 2- vii)(REQUIREMENTS FOR PP GEOGRIDS - Width)	-	200	-
5.2- Table 2- vIii)(REQUIREMENTS FOR PET GEOGRIDS - Roll length)	-	200	-
6(MARKING AND LABELLING)	-	0	-
7(PACKING - minimum thickness of packing film)	-	0	-
8.1(IDENTIFICATION, DELIVERY, STORAGE AND HANDLING)	-	0	-

14 Dec, 2026

-
-

9400

The Synthetic and Art Silk Mills' Research Association (SASMIRA), MUMBAI

7175004

IS 16202 (2014)

Agro textiles - Woven ground covers for horticulture application - Specification

16600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Linear Density, Denier)	-	400	-
4.1(Heat Shrinkage, %)	-	500	-
4.1(Heat Shrinkage, %)	-	500	-
4.2(Plain Weave & Sett, ends & picks/dm)	-	800	-
4.3(Colour)	-	200	-
5.1, Table-1(Mass, g/m² , IS 1964)	-	200	-
5.1, Table-1(Tensile Test, Kgf, IS 1969,Part-2)	-	500	-
5.1, Table-1(Tear Strength, Kgf, IS 6489,Part-1)	-	500	-
5.1, Table-1(Air permeability, cft/ft²/s, IS 11056)	-	500	-
5.1, Table-1(Index puncture resistance, kgf, Annexure-B)	-	700	-
5.1, Table-1(UV accelerated exposure testing, Annexure-C)	-	10500	-
5.1, Table-1(Water permeability, lt/m2 /s, IS 14324)	-	700	-
5.2(Dimension and Mass)	-	400	-
Clause No. 4.1(linear density of polypropylene tape)	-	0	-
Clause No. 4.1(Heat shrinkage of the tape at 60 and 90℃)	-	0	-
Clause No. 4.2(Fabric ground cover)	-	0	-
Clause No. 5.1, Table No. 1, (i)(Mass, g/m2)	-	0	-
Clause No. 5.1, Table No. 1, (ii)(Tensile strength (grab), kgf)	-	0	-
Clause No. 5.1, Table No. 1, (iii)(Tear strength, kgf)	-	0	-
Clause No. 5.1, Table No. 1, (iv)(Air permeability, cft/ft²/s)	-	0	-
Clause No. 5.1, Table No. 1, (v)(Index puncture resistance, kgf)	-	0	-
Clause No. 5.1, Table No. 1, (vi)(UV accelerated exposure testing, percent strength retained)	-	0	-
Clause No. 5.1, Table No. 1, (vii)(Water permeability lt/m2/s)	-	0	-
Clause No. 5.2(Dimensions and Mass)	-	0	-
Clause No. 7(Packing thickness)	-	200	-

14 Dec, 2026

-
-

9401

The Synthetic and Art Silk Mills' Research Association (SASMIRA), MUMBAI

7175004

IS 16008 : Part 2 (2016)

Agro textiles “ Shade nets for agriculture and horticulture purposes “ Specification Part 2 Shade nets made from mono filament yarns (first revision)

18900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.0(Material)	-	500	-
4.1(HDPE Mono filament)	-	400	-
4.1(HDPE Mono filament)	-	400	-
4.1.1(HDPE Mono filament)	-	400	-
4.2(Fabric)	-	200	-
4.3(Colour)	-	400	-
5.0(Types)	-	2100	-
6.0(Requirements)	-	200	-
6.1(Dimensions and mass)	-	400	-
6.2(Dimensions and mass)	-	400	-
6.2 Table 1(Mass g/m2,Min)	-	200	-
6.2 Table 1(Average breaking strength of shade nets fabric (Strip method,Warpway,Weftway 325 mm × 50 mm test piece with gauge length of 200 mm), N, Min )	-	500	-
6.2 Table 1(Warpway Weftway)	-	0	-
6.2 Table 1(Retention of breaking strength after UV exposure, N, Min)	-	10500	-
6.2 Table 1(Colour fastness to artificial light1)	-	1200	-
6.2 Table 1(Bursting pressure, kgf/cm2, Min)	-	400	-
6.2 Table 1(Shading %)	-	700	-

14 Dec, 2026

-
-

9402

Sleen India Biz venture Private Limited, Agra

9139736

IS 17286 (2019)

Textiles – Water-proof multipurpose rain poncho with convertibility as bivouac – Specification

TEXTILES — WATER PROOF MULTIPURPOSE RAIN PONCHO WITH CONVERTIBILITY AS BIVOUAC — SPECIFICATION

29500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4(STITCHING)	-	250	10% Discount for BIS
Clause 4.1(Tolerances)	-	250	10% Discount for BIS
Clauses 6.4(Slide fastener)	-	2000	10% Discount for BIS
Clauses 6.5(Hook and loop fastener)	-	3000	10% Discount for BIS
Clauses 6.1, Table 1 (i)(Nature of fibre/filament)	-	600	10% Discount for BIS
Clauses 6.1, Table 1 (ii)(Nature of coating)	-	500	10% Discount for BIS
Clauses 6.1, Table 1 (iii)(Width, cm)	-	250	10% Discount for BIS
Clauses 6.1, Table 1 (iv)(End/dm, Min)	-	250	10% Discount for BIS
Clauses 6.1, Table 1 (v)(Picks/dm, Min)	-	250	10% Discount for BIS
Clauses 6.1, Table 1 (vi)(Mass (Single layer), g/sq. m)	-	300	10% Discount for BIS
Clauses 6.1, Table 1 (vii)(Mass of de-proofed fabric, g/sq. m)	-	500	10% Discount for BIS
Clauses 6.1, Table 1 (viii)(Breaking strength (strip test) (5 × 20 cm fabric between grips), N, Min: a) Warp-wise b) Weft-wise)	-	600	10% Discount for BIS
Clauses 6.1, Table 1 (ix)(Tearing strength (Method A-1), N, Min: a) Warp-wise b) Weft-wise)	-	600	10% Discount for BIS
Clauses 6.1, Table 1 (x)(Colour fastness to washing, Test C(3): a) Change in colour b) Staining on adjacent fabric)	-	600	10% Discount for BIS
Clauses 6.1, Table 1 (xi)(Colour fastness to rubbing a) Dry b) Wet)	-	500	10% Discount for BIS
Clauses 6.1, Table 1 (xii)(Colour fastness to light)	-	1000	10% Discount for BIS
Clauses 6.1, Table 1 (xiii)(Dimensional change due to relaxation, Max, percent: a) Warp-wise b) Weft-wise)	-	500	10% Discount for BIS
Clauses 6.1, Table 1 (xiv)(Resistance to accelerated ageing at 70°C ± 1°C for 168 h in hot air circulating oven)	-	3000	10% Discount for BIS
Clauses 6.1, Table 1 (xv)(Resistance to low temperature [(-)30 ± 2°C] for 6 h)	-	2500	10% Discount for BIS
Clauses 6.1, Table 1 (xvi)(Resistance to damage by flexing (after 100,000 cycle))	-	800	10% Discount for BIS
Clauses 6.1, Table 1 (xvii)(Blocking)	-	200	10% Discount for BIS
Clauses 6.1, Table 1 (xviii)(pH value of aqueous extract (Cold method))	-	250	10% Discount for BIS
Clauses 6.1, Table 1 (xix)(Water repellency (face side- uncoated), spray rating, Min)	-	250	10% Discount for BIS
Clauses 6.1, Table 1 (xx)(Hydrostatic pressure head test (Water column height at 60 cm for 60 min), (face side- uncoated))	-	500	10% Discount for BIS
Clauses 6.1, Table 1 (xxi)(Bundesmann-shower test (Double layers as used in the poncho- face side- uncoated), (Expose the specimen to the shower for 30 min): a) Amount of water absorption, Max, percent)	-	500	10% Discount for BIS
Clauses 6.1, Table 1 (xxi)(b) Amount of water penetration, ml 23514)	-	500	10% Discount for BIS
Clauses 6.1, Table 1 (xxi)(c) Wetting of inner surface)	-	300	10% Discount for BIS
Clauses 6.1, Table 1 (xxii)(Moisture vapour transmission, mg/cm2 /h, Min)	-	800	10% Discount for BIS
Clauses 6.1, Table 1 (xxiii)(Bending length, cm, Max: a) Warp-wise b) Weft-wise)	-	500	10% Discount for BIS
Clauses 6.1, Table 1 (xxiv)(Separation of polyurethane (PU) film)	-	250	10% Discount for BIS
Clause 6.2, Table 2 (i)(Nature of fibre/filament)	-	600	10% Discount for BIS
Clause 6.2, Table 2 (ii)(Length, cm)	-	200	10% Discount for BIS
Clause 6.2, Table 2 (iii)(Mass per linear metre, g)	-	300	10% Discount for BIS
Clause 6.2, Table 2 (iv)(Breaking strength (200 mm gauge length), N, Min)	-	600	10% Discount for BIS
Clause 6.2, Table 2 (v)(Colour fastness to washing, Test C(3): a) Change in colour b) Staining on adjacent fabric)	-	600	10% Discount for BIS
Clause 6.2, Table 2 (vi)(Colour fastness to light)	-	1000	10% Discount for BIS
Clause 6.2, Table 2 (vii)(Dimensional change due to relaxation, length wise directions, percent, Max)	-	500	10% Discount for BIS
Clause 6.2, Table 2 (viii)(pH value of aqueous extract (cold method))	-	300	10% Discount for BIS
Clause 6.3, Table 3 (i)(Nature of fibre/filament)	-	600	10% Discount for BIS
Clause 6.3, Table 3 (ii)(Number of ends in full width, Min)	-	200	10% Discount for BIS
Clause 6.3, Table 3 (iii)(Number of picks/dm, Min)	-	200	10% Discount for BIS
Clause 6.3, Table 3 (iv)(Width, cm)	-	200	10% Discount for BIS
Clause 6.3, Table 3 (v)(Mass per linear metre, g)	-	300	10% Discount for BIS
Clause 6.3, Table 3 (vi)(Colour fastness to washing, Test C(3): a) Change in colour b) Staining on adjacent fabric)	-	600	10% Discount for BIS
Clause 6.3, Table 3 (vii)(Colour fastness to light)	-	1000	10% Discount for BIS
Clause 7(MARKING)	-	0	10% Discount for BIS
Clause 8(PACKING)	-	0	10% Discount for BIS
Clause 4(STITCHING)	-	0	Repeated clause.
Clause 4.1(Tolerances)	-	0	Repeated clause.
Clauses 6.4(Slide fastener)	-	0	Repeated clause.
Clauses 6.5(Hook and loop fastener)	-	0	Repeated clause.
Clauses 6.1, Table 1 (i)(Nature of fibre/filament)	-	0	Repeated clause.
Clauses 6.1, Table 1 (ii)(Nature of coating)	-	0	Repeated clause.
Clauses 6.1, Table 1 (iii)(Width, cm)	-	0	Repeated clause.
Clauses 6.1, Table 1 (iv)(End/dm, Min)	-	0	Repeated clause.
Clauses 6.1, Table 1 (v)(Picks/dm, Min)	-	0	Repeated clause.
Clauses 6.1, Table 1 (vi)(Mass (Single layer), g/sq. m)	-	0	Repeated clause.
Clauses 6.1, Table 1 (vii)(Mass of de-proofed fabric, g/sq. m)	-	0	Repeated clause.
Clauses 6.1, Table 1 (viii)(Breaking strength (strip test) (5 × 20 cm fabric between grips), N, Min: a) Warp-wise b) Weft-wise)	-	0	Repeated clause.
Clauses 6.1, Table 1 (ix)(Tearing strength (Method A-1), N, Min: a) Warp-wise b) Weft-wise)	-	0	Repeated clause.
Clauses 6.1, Table 1 (x)(Colour fastness to washing, Test C(3): a) Change in colour b) Staining on adjacent fabric)	-	0	Repeated clause.
Clauses 6.1, Table 1 (xi)(Colour fastness to rubbing a) Dry b) Wet)	-	0	Repeated clause.
Clauses 6.1, Table 1 (xii)(Colour fastness to light)	-	0	Repeated clause.
Clauses 6.1, Table 1 (xiii)(Dimensional change due to relaxation, Max, percent: a) Warp-wise b) Weft-wise)	-	0	Repeated clause.
Clauses 6.1, Table 1 (xiv)(Resistance to accelerated ageing at 70°C ± 1°C for 168 h in hot air circulating oven)	-	0	Repeated clause.
Clauses 6.1, Table 1 (xv)(Resistance to low temperature [(-)30 ± 2°C] for 6 h)	-	0	Repeated clause.
Clauses 6.1, Table 1 (xvi)(Resistance to damage by flexing (after 100,000 cycle))	-	0	Repeated clause.
Clauses 6.1, Table 1 (xvii)(Blocking)	-	0	Repeated clause.
Clauses 6.1, Table 1 (xviii)(pH value of aqueous extract (Cold method))	-	0	Repeated clause.
Clauses 6.1, Table 1 (xix)(Water repellency (face side- uncoated), spray rating, Min)	-	0	Repeated clause.
Clauses 6.1, Table 1 (xx)(Hydrostatic pressure head test (Water column height at 60 cm for 60 min), (face side- uncoated))	-	0	Repeated clause.
Clauses 6.1, Table 1 (xxi)(Bundesmann-shower test (Double layers as used in the poncho- face side- uncoated), (Expose the specimen to the shower for 30 min): a) Amount of water absorption, Max, percent)	-	0	Repeated clause.
Clauses 6.1, Table 1 (xxi)(b) Amount of water penetration, ml 23514)	-	0	Repeated clause.
Clauses 6.1, Table 1 (xxi)(c) Wetting of inner surface)	-	0	Repeated clause.
Clauses 6.1, Table 1 (xxii)(Moisture vapour transmission, mg/cm2 /h, Min)	-	0	Repeated clause.
Clauses 6.1, Table 1 (xxiii)(Bending length, cm, Max: a) Warp-wise b) Weft-wise)	-	0	Repeated clause.
Clauses 6.1, Table 1 (xxiv)(Separation of polyurethane (PU) film)	-	0	Repeated clause.
Clause 6.2, Table 2 (i)(Nature of fibre/filament)	-	0	Repeated clause.
Clause 6.2, Table 2 (ii)(Length, cm)	-	0	Repeated clause.
Clause 6.2, Table 2 (iii)(Mass per linear metre, g)	-	0	Repeated clause.
Clause 6.2, Table 2 (iv)(Breaking strength (200 mm gauge length), N, Min)	-	0	Repeated clause.
Clause 6.2, Table 2 (v)(Colour fastness to washing, Test C(3): a) Change in colour b) Staining on adjacent fabric)	-	0	Repeated clause.
Clause 6.2, Table 2 (vi)(Colour fastness to light)	-	0	Repeated clause.
Clause 6.2, Table 2 (vii)(Dimensional change due to relaxation, length wise directions, percent, Max)	-	0	Repeated clause.
Clause 6.2, Table 2 (viii)(pH value of aqueous extract (cold method))	-	0	Repeated clause.
Clause 6.3, Table 3 (i)(Nature of fibre/filament)	-	0	Repeated clause.
Clause 6.3, Table 3 (ii)(Number of ends in full width, Min)	-	0	Repeated clause.
Clause 6.3, Table 3 (iii)(Number of picks/dm, Min)	-	0	Repeated clause.
Clause 6.3, Table 3 (iv)(Width, cm)	-	0	Repeated clause.
Clause 6.3, Table 3 (v)(Mass per linear metre, g)	-	0	Repeated clause.
Clause 6.3, Table 3 (vi)(Colour fastness to washing, Test C(3): a) Change in colour b) Staining on adjacent fabric)	-	0	Repeated clause.
Clause 6.3, Table 3 (vii)(Colour fastness to light)	-	0	Repeated clause.
Clause 7(MARKING)	-	0	Repeated clause.
Clause 8(PACKING)	-	0	Repeated clause.
Clause 4(STITCHING)	-	0	Repeated clause.
Clause 4.1(Tolerances)	-	0	Repeated clause.
Clauses 6.4(Slide fastener)	-	0	Repeated clause.
Clauses 6.5(Hook and loop fastener)	-	0	Repeated clause.
Clauses 6.1, Table 1 (i)(Nature of fibre/filament)	-	0	Repeated clause.
Clauses 6.1, Table 1 (ii)(Nature of coating)	-	0	Repeated clause.
Clauses 6.1, Table 1 (iii)(Width, cm)	-	0	Repeated clause.
Clauses 6.1, Table 1 (iv)(End/dm, Min)	-	0	Repeated clause.
Clauses 6.1, Table 1 (v)(Picks/dm, Min)	-	0	Repeated clause.
Clauses 6.1, Table 1 (vi)(Mass (Single layer), g/sq. m)	-	0	Repeated clause.
Clauses 6.1, Table 1 (vii)(Mass of de-proofed fabric, g/sq. m)	-	0	Repeated clause.
Clauses 6.1, Table 1 (viii)(Breaking strength (strip test) (5 × 20 cm fabric between grips), N, Min: a) Warp-wise b) Weft-wise)	-	0	Repeated clause.
Clauses 6.1, Table 1 (ix)(Tearing strength (Method A-1), N, Min: a) Warp-wise b) Weft-wise)	-	0	Repeated clause.
Clauses 6.1, Table 1 (x)(Colour fastness to washing, Test C(3): a) Change in colour b) Staining on adjacent fabric)	-	0	Repeated clause.
Clauses 6.1, Table 1 (xi)(Colour fastness to rubbing a) Dry b) Wet)	-	0	Repeated clause.
Clauses 6.1, Table 1 (xii)(Colour fastness to light)	-	0	Repeated clause.
Clauses 6.1, Table 1 (xiii)(Dimensional change due to relaxation, Max, percent: a) Warp-wise b) Weft-wise)	-	0	Repeated clause.
Clauses 6.1, Table 1 (xiv)(Resistance to accelerated ageing at 70°C ± 1°C for 168 h in hot air circulating oven)	-	0	Repeated clause.
Clauses 6.1, Table 1 (xv)(Resistance to low temperature [(-)30 ± 2°C] for 6 h)	-	0	Repeated clause.
Clauses 6.1, Table 1 (xvi)(Resistance to damage by flexing (after 100,000 cycle))	-	0	Repeated clause.
Clauses 6.1, Table 1 (xvii)(Blocking)	-	0	Repeated clause.
Clauses 6.1, Table 1 (xviii)(pH value of aqueous extract (Cold method))	-	0	Repeated clause.
Clauses 6.1, Table 1 (xix)(Water repellency (face side- uncoated), spray rating, Min)	-	0	Repeated clause.
Clauses 6.1, Table 1 (xx)(Hydrostatic pressure head test (Water column height at 60 cm for 60 min), (face side- uncoated))	-	0	Repeated clause.
Clauses 6.1, Table 1 (xxi)(Bundesmann-shower test (Double layers as used in the poncho- face side- uncoated), (Expose the specimen to the shower for 30 min): a) Amount of water absorption, Max, percent)	-	0	Repeated clause.
Clauses 6.1, Table 1 (xxi)(b) Amount of water penetration, ml 23514)	-	0	Repeated clause.
Clauses 6.1, Table 1 (xxi)(c) Wetting of inner surface)	-	0	Repeated clause.
Clauses 6.1, Table 1 (xxii)(Moisture vapour transmission, mg/cm2 /h, Min)	-	0	Repeated clause.
Clauses 6.1, Table 1 (xxiii)(Bending length, cm, Max: a) Warp-wise b) Weft-wise)	-	0	Repeated clause.
Clauses 6.1, Table 1 (xxiv)(Separation of polyurethane (PU) film)	-	0	Repeated clause.
Clause 6.2, Table 2 (i)(Nature of fibre/filament)	-	0	Repeated clause.
Clause 6.2, Table 2 (ii)(Length, cm)	-	0	Repeated clause.
Clause 6.2, Table 2 (iii)(Mass per linear metre, g)	-	0	Repeated clause.
Clause 6.2, Table 2 (iv)(Breaking strength (200 mm gauge length), N, Min)	-	0	Repeated clause.
Clause 6.2, Table 2 (v)(Colour fastness to washing, Test C(3): a) Change in colour b) Staining on adjacent fabric)	-	0	Repeated clause.
Clause 6.2, Table 2 (vi)(Colour fastness to light)	-	0	Repeated clause.
Clause 6.2, Table 2 (vii)(Dimensional change due to relaxation, length wise directions, percent, Max)	-	0	Repeated clause.
Clause 6.2, Table 2 (viii)(pH value of aqueous extract (cold method))	-	0	Repeated clause.
Clause 6.3, Table 3 (i)(Nature of fibre/filament)	-	0	Repeated clause.
Clause 6.3, Table 3 (ii)(Number of ends in full width, Min)	-	0	Repeated clause.
Clause 6.3, Table 3 (iii)(Number of picks/dm, Min)	-	0	Repeated clause.
Clause 6.3, Table 3 (iv)(Width, cm)	-	0	Repeated clause.
Clause 6.3, Table 3 (v)(Mass per linear metre, g)	-	0	Repeated clause.
Clause 6.3, Table 3 (vi)(Colour fastness to washing, Test C(3): a) Change in colour b) Staining on adjacent fabric)	-	0	Repeated clause.
Clause 6.3, Table 3 (vii)(Colour fastness to light)	-	0	Repeated clause.
Clause 7(MARKING)	-	0	Repeated clause.
Clause 8(PACKING)	-	0	Repeated clause.
3(MATERIAL AND MANUFACTURE)	-	0	Repeated clause.
Clause 4(STITCHING)	-	0	Repeated clause.
Clause 4.1(Tolerances)	-	0	Repeated clause.
Clauses 6.4(Slide fastener)	-	0	Repeated clause.
Clauses 6.5(Hook and loop fastener)	-	0	Repeated clause.
Clauses 6.1, Table 1 (i)(Nature of fibre/filament)	-	0	Repeated clause.
Clauses 6.1, Table 1 (ii)(Nature of coating)	-	0	Repeated clause.
Clauses 6.1, Table 1 (iii)(Width, cm)	-	0	Repeated clause.
Clauses 6.1, Table 1 (iv)(End/dm, Min)	-	0	Repeated clause.
Clauses 6.1, Table 1 (v)(Picks/dm, Min)	-	0	Repeated clause.
Clauses 6.1, Table 1 (vi)(Mass (Single layer), g/sq. m)	-	0	Repeated clause.
Clauses 6.1, Table 1 (vii)(Mass of de-proofed fabric, g/sq. m)	-	0	Repeated clause.
Clauses 6.1, Table 1 (viii)(Breaking strength (strip test) (5 × 20 cm fabric between grips), N, Min: a) Warp-wise b) Weft-wise)	-	0	Repeated clause.
Clauses 6.1, Table 1 (ix)(Tearing strength (Method A-1), N, Min: a) Warp-wise b) Weft-wise)	-	0	Repeated clause.
Clauses 6.1, Table 1 (x)(Colour fastness to washing, Test C(3): a) Change in colour b) Staining on adjacent fabric)	-	0	Repeated clause.
Clauses 6.1, Table 1 (xi)(Colour fastness to rubbing a) Dry b) Wet)	-	0	Repeated clause.
Clauses 6.1, Table 1 (xii)(Colour fastness to light)	-	0	Repeated clause.
Clauses 6.1, Table 1 (xiii)(Dimensional change due to relaxation, Max, percent: a) Warp-wise b) Weft-wise)	-	0	Repeated clause.
Clauses 6.1, Table 1 (xiv)(Resistance to accelerated ageing at 70°C ± 1°C for 168 h in hot air circulating oven)	-	0	Repeated clause.
Clauses 6.1, Table 1 (xv)(Resistance to low temperature [(-)30 ± 2°C] for 6 h)	-	0	Repeated clause.
Clauses 6.1, Table 1 (xvi)(Resistance to damage by flexing (after 100,000 cycle))	-	0	Repeated clause.
Clauses 6.1, Table 1 (xvii)(Blocking)	-	0	Repeated clause.
Clauses 6.1, Table 1 (xviii)(pH value of aqueous extract (Cold method))	-	0	Repeated clause.
Clauses 6.1, Table 1 (xix)(Water repellency (face side- uncoated), spray rating, Min)	-	0	Repeated clause.
Clauses 6.1, Table 1 (xx)(Hydrostatic pressure head test (Water column height at 60 cm for 60 min), (face side- uncoated))	-	0	Repeated clause.
Clauses 6.1, Table 1 (xxi)(Bundesmann-shower test (Double layers as used in the poncho- face side- uncoated), (Expose the specimen to the shower for 30 min): a) Amount of water absorption, Max, percent)	-	0	Repeated clause.
Clauses 6.1, Table 1 (xxi)(b) Amount of water penetration, ml 23514)	-	0	Repeated clause.
Clauses 6.1, Table 1 (xxi)(c) Wetting of inner surface)	-	0	Repeated clause.
Clauses 6.1, Table 1 (xxii)(Moisture vapour transmission, mg/cm2 /h, Min)	-	0	Repeated clause.
Clauses 6.1, Table 1 (xxiii)(Bending length, cm, Max: a) Warp-wise b) Weft-wise)	-	0	Repeated clause.
Clauses 6.1, Table 1 (xxiv)(Separation of polyurethane (PU) film)	-	0	Repeated clause.
Clause 6.2, Table 2 (i)(Nature of fibre/filament)	-	0	Repeated clause.
Clause 6.2, Table 2 (ii)(Length, cm)	-	0	Repeated clause.
Clause 6.2, Table 2 (iii)(Mass per linear metre, g)	-	0	Repeated clause.
Clause 6.2, Table 2 (iv)(Breaking strength (200 mm gauge length), N, Min)	-	0	Repeated clause.
Clause 6.2, Table 2 (v)(Colour fastness to washing, Test C(3): a) Change in colour b) Staining on adjacent fabric)	-	0	Repeated clause.
Clause 6.2, Table 2 (vi)(Colour fastness to light)	-	0	Repeated clause.
Clause 6.2, Table 2 (vii)(Dimensional change due to relaxation, length wise directions, percent, Max)	-	0	Repeated clause.
Clause 6.2, Table 2 (viii)(pH value of aqueous extract (cold method))	-	0	Repeated clause.
Clause 6.3, Table 3 (i)(Nature of fibre/filament)	-	0	Repeated clause.
Clause 6.3, Table 3 (ii)(Number of ends in full width, Min)	-	0	Repeated clause.
Clause 6.3, Table 3 (iii)(Number of picks/dm, Min)	-	0	Repeated clause.
Clause 6.3, Table 3 (iv)(Width, cm)	-	0	Repeated clause.
Clause 6.3, Table 3 (v)(Mass per linear metre, g)	-	0	Repeated clause.
Clause 6.3, Table 3 (vi)(Colour fastness to washing, Test C(3): a) Change in colour b) Staining on adjacent fabric)	-	0	Repeated clause.
Clause 6.3, Table 3 (vii)(Colour fastness to light)	-	0	Repeated clause.
Clause 7(MARKING)	-	0	Repeated clause.
Clause 8(PACKING)	-	0	Repeated clause.
3(MATERIAL AND MANUFACTURE)	-	0	Repeated clause.
Clause 4(STITCHING)	-	0	Repeated clause.
Clause 4.1(Tolerances)	-	0	Repeated clause.
Clauses 6.4(Slide fastener)	-	0	Repeated clause.
Clauses 6.5(Hook and loop fastener)	-	0	Repeated clause.
Clauses 6.1, Table 1 (i)(Nature of fibre/filament)	-	0	Repeated clause.
Clauses 6.1, Table 1 (ii)(Nature of coating)	-	0	Repeated clause.
Clauses 6.1, Table 1 (iii)(Width, cm)	-	0	Repeated clause.
Clauses 6.1, Table 1 (iv)(End/dm, Min)	-	0	Repeated clause.
Clauses 6.1, Table 1 (v)(Picks/dm, Min)	-	0	Repeated clause.
Clauses 6.1, Table 1 (vi)(Mass (Single layer), g/sq. m)	-	0	Repeated clause.
Clauses 6.1, Table 1 (vii)(Mass of de-proofed fabric, g/sq. m)	-	0	Repeated clause.
Clauses 6.1, Table 1 (viii)(Breaking strength (strip test) (5 × 20 cm fabric between grips), N, Min: a) Warp-wise b) Weft-wise)	-	0	Repeated clause.
Clauses 6.1, Table 1 (ix)(Tearing strength (Method A-1), N, Min: a) Warp-wise b) Weft-wise)	-	0	Repeated clause.
Clauses 6.1, Table 1 (x)(Colour fastness to washing, Test C(3): a) Change in colour b) Staining on adjacent fabric)	-	0	Repeated clause.
Clauses 6.1, Table 1 (xi)(Colour fastness to rubbing a) Dry b) Wet)	-	0	Repeated clause.
Clauses 6.1, Table 1 (xii)(Colour fastness to light)	-	0	Repeated clause.
Clauses 6.1, Table 1 (xiii)(Dimensional change due to relaxation, Max, percent: a) Warp-wise b) Weft-wise)	-	0	Repeated clause.
Clauses 6.1, Table 1 (xiv)(Resistance to accelerated ageing at 70°C ± 1°C for 168 h in hot air circulating oven)	-	0	Repeated clause.
Clauses 6.1, Table 1 (xv)(Resistance to low temperature [(-)30 ± 2°C] for 6 h)	-	0	Repeated clause.
Clauses 6.1, Table 1 (xvi)(Resistance to damage by flexing (after 100,000 cycle))	-	0	Repeated clause.
Clauses 6.1, Table 1 (xvii)(Blocking)	-	0	Repeated clause.
Clauses 6.1, Table 1 (xviii)(pH value of aqueous extract (Cold method))	-	0	Repeated clause.
Clauses 6.1, Table 1 (xix)(Water repellency (face side- uncoated), spray rating, Min)	-	0	Repeated clause.
Clauses 6.1, Table 1 (xx)(Hydrostatic pressure head test (Water column height at 60 cm for 60 min), (face side- uncoated))	-	0	Repeated clause.
Clauses 6.1, Table 1 (xxi)(Bundesmann-shower test (Double layers as used in the poncho- face side- uncoated), (Expose the specimen to the shower for 30 min): a) Amount of water absorption, Max, percent)	-	0	Repeated clause.
Clauses 6.1, Table 1 (xxi)(b) Amount of water penetration, ml 23514)	-	0	Repeated clause.
Clauses 6.1, Table 1 (xxi)(c) Wetting of inner surface)	-	0	Repeated clause.
Clauses 6.1, Table 1 (xxii)(Moisture vapour transmission, mg/cm2 /h, Min)	-	0	Repeated clause.
Clauses 6.1, Table 1 (xxiii)(Bending length, cm, Max: a) Warp-wise b) Weft-wise)	-	0	Repeated clause.
Clauses 6.1, Table 1 (xxiv)(Separation of polyurethane (PU) film)	-	0	Repeated clause.
Clause 6.2, Table 2 (i)(Nature of fibre/filament)	-	0	Repeated clause.
Clause 6.2, Table 2 (ii)(Length, cm)	-	0	Repeated clause.
Clause 6.2, Table 2 (iii)(Mass per linear metre, g)	-	0	Repeated clause.
Clause 6.2, Table 2 (iv)(Breaking strength (200 mm gauge length), N, Min)	-	0	Repeated clause.
Clause 6.2, Table 2 (v)(Colour fastness to washing, Test C(3): a) Change in colour b) Staining on adjacent fabric)	-	0	Repeated clause.
Clause 6.2, Table 2 (vi)(Colour fastness to light)	-	0	Repeated clause.
Clause 6.2, Table 2 (vii)(Dimensional change due to relaxation, length wise directions, percent, Max)	-	0	Repeated clause.
Clause 6.2, Table 2 (viii)(pH value of aqueous extract (cold method))	-	0	Repeated clause.
Clause 6.3, Table 3 (i)(Nature of fibre/filament)	-	0	Repeated clause.
Clause 6.3, Table 3 (ii)(Number of ends in full width, Min)	-	0	Repeated clause.
Clause 6.3, Table 3 (iii)(Number of picks/dm, Min)	-	0	Repeated clause.
Clause 6.3, Table 3 (iv)(Width, cm)	-	0	Repeated clause.
Clause 6.3, Table 3 (v)(Mass per linear metre, g)	-	0	Repeated clause.
Clause 6.3, Table 3 (vi)(Colour fastness to washing, Test C(3): a) Change in colour b) Staining on adjacent fabric)	-	0	Repeated clause.
Clause 6.3, Table 3 (vii)(Colour fastness to light)	-	0	Repeated clause.
Clause 7(MARKING)	-	0	Repeated clause.
Clause 8(PACKING)	-	0	Repeated clause.
3(MATERIAL AND MANUFACTURE)	-	0	Repeated clause.
5(Freedom from defect)	-	300	10 % Discount on BIS samples.
Clause 4(STITCHING)	-	0	Repeated clause.
Clause 4.1(Tolerances)	-	0	Repeated clause.
Clauses 6.4(Slide fastener)	-	0	Repeated clause.
Clauses 6.5(Hook and loop fastener)	-	0	Repeated clause.
Clauses 6.1, Table 1 (i)(Nature of fibre/filament)	-	0	Repeated clause.
Clauses 6.1, Table 1 (ii)(Nature of coating)	-	0	Repeated clause.
Clauses 6.1, Table 1 (iii)(Width, cm)	-	0	Repeated clause.
Clauses 6.1, Table 1 (iv)(End/dm, Min)	-	0	Repeated clause.
Clauses 6.1, Table 1 (v)(Picks/dm, Min)	-	0	Repeated clause.
Clauses 6.1, Table 1 (vi)(Mass (Single layer), g/sq. m)	-	0	Repeated clause.
Clauses 6.1, Table 1 (vii)(Mass of de-proofed fabric, g/sq. m)	-	0	Repeated clause.
Clauses 6.1, Table 1 (viii)(Breaking strength (strip test) (5 × 20 cm fabric between grips), N, Min: a) Warp-wise b) Weft-wise)	-	0	Repeated clause.
Clauses 6.1, Table 1 (ix)(Tearing strength (Method A-1), N, Min: a) Warp-wise b) Weft-wise)	-	0	Repeated clause.
Clauses 6.1, Table 1 (x)(Colour fastness to washing, Test C(3): a) Change in colour b) Staining on adjacent fabric)	-	0	Repeated clause.
Clauses 6.1, Table 1 (xi)(Colour fastness to rubbing a) Dry b) Wet)	-	0	Repeated clause.
Clauses 6.1, Table 1 (xii)(Colour fastness to light)	-	0	Repeated clause.
Clauses 6.1, Table 1 (xiii)(Dimensional change due to relaxation, Max, percent: a) Warp-wise b) Weft-wise)	-	0	Repeated clause.
Clauses 6.1, Table 1 (xiv)(Resistance to accelerated ageing at 70°C ± 1°C for 168 h in hot air circulating oven)	-	0	Repeated clause.
Clauses 6.1, Table 1 (xv)(Resistance to low temperature [(-)30 ± 2°C] for 6 h)	-	0	Repeated clause.
Clauses 6.1, Table 1 (xvi)(Resistance to damage by flexing (after 100,000 cycle))	-	0	Repeated clause.
Clauses 6.1, Table 1 (xvii)(Blocking)	-	0	Repeated clause.
Clauses 6.1, Table 1 (xviii)(pH value of aqueous extract (Cold method))	-	0	Repeated clause.
Clauses 6.1, Table 1 (xix)(Water repellency (face side- uncoated), spray rating, Min)	-	0	Repeated clause.
Clauses 6.1, Table 1 (xx)(Hydrostatic pressure head test (Water column height at 60 cm for 60 min), (face side- uncoated))	-	0	Repeated clause.
Clauses 6.1, Table 1 (xxi)(Bundesmann-shower test (Double layers as used in the poncho- face side- uncoated), (Expose the specimen to the shower for 30 min): a) Amount of water absorption, Max, percent)	-	0	Repeated clause.
Clauses 6.1, Table 1 (xxi)(b) Amount of water penetration, ml 23514)	-	0	Repeated clause.
Clauses 6.1, Table 1 (xxi)(c) Wetting of inner surface)	-	0	Repeated clause.
Clauses 6.1, Table 1 (xxii)(Moisture vapour transmission, mg/cm2 /h, Min)	-	0	Repeated clause.
Clauses 6.1, Table 1 (xxiii)(Bending length, cm, Max: a) Warp-wise b) Weft-wise)	-	0	Repeated clause.
Clauses 6.1, Table 1 (xxiv)(Separation of polyurethane (PU) film)	-	0	Repeated clause.
Clause 6.2, Table 2 (i)(Nature of fibre/filament)	-	0	Repeated clause.
Clause 6.2, Table 2 (ii)(Length, cm)	-	0	Repeated clause.
Clause 6.2, Table 2 (iii)(Mass per linear metre, g)	-	0	Repeated clause.
Clause 6.2, Table 2 (iv)(Breaking strength (200 mm gauge length), N, Min)	-	0	Repeated clause.
Clause 6.2, Table 2 (v)(Colour fastness to washing, Test C(3): a) Change in colour b) Staining on adjacent fabric)	-	0	Repeated clause.
Clause 6.2, Table 2 (vi)(Colour fastness to light)	-	0	Repeated clause.
Clause 6.2, Table 2 (vii)(Dimensional change due to relaxation, length wise directions, percent, Max)	-	0	Repeated clause.
Clause 6.2, Table 2 (viii)(pH value of aqueous extract (cold method))	-	0	Repeated clause.
Clause 6.3, Table 3 (i)(Nature of fibre/filament)	-	0	Repeated clause.
Clause 6.3, Table 3 (ii)(Number of ends in full width, Min)	-	0	Repeated clause.
Clause 6.3, Table 3 (iii)(Number of picks/dm, Min)	-	0	Repeated clause.
Clause 6.3, Table 3 (iv)(Width, cm)	-	0	Repeated clause.
Clause 6.3, Table 3 (v)(Mass per linear metre, g)	-	0	Repeated clause.
Clause 6.3, Table 3 (vi)(Colour fastness to washing, Test C(3): a) Change in colour b) Staining on adjacent fabric)	-	0	Repeated clause.
Clause 6.3, Table 3 (vii)(Colour fastness to light)	-	0	Repeated clause.
Clause 7(MARKING)	-	0	Repeated clause.
Clause 8(PACKING)	-	0	Repeated clause.
3(MATERIAL AND MANUFACTURE)	-	0	Repeated clause.
5(Freedom from defect)	-	0	Repeated clause.

15 May, 2027

-
Included w.e.f 25.11.2024. Colour fastness to light is restricted to exposure cycle A1, A3 and B only.

9403

BIS, Western Regional Laboratory (WRL)

None

IS 2347 (2023)

DOMESTIC PRESSURE COOKER ï¿½ SPECIFICATION

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Gross capacity)	-
4.2 (Body Capacity)	-
8.1 (Air Pressure Test )	-
6 (Construction)	-
7 (Workmanship and Finish )	-
8.2 (Proof Pressure Test )	-
8.3 (Operating Test for Pressure Regulating Device )	-
8.4 (Test for Safety Relief Device )	-
8.5 (Bursting Pressure Test )	-
8.6 (Test for Removal of Lid under Pressure )	-
8.14 (Ply construction cooker Body )	-

-
The following test facilities are not available: (1) Material as per Clause 5.1, 5.2, 5.5, 5.6, 5.7, 5.8, 5.9, 5.10, 5.11 (2) Test for Hard Anodized Surface. (3) Test for spring-loaded mechanism (4) Test for handle and knob. (5) Electrical Pressure cooker

9404

Sleen India Biz venture Private Limited, Agra

9139736

IS 17861 (2022)

TEXTILE BOOTS WITH POLYMERIC SOLE JUNGLE BOOTS - SPECIFICATION Third Revision

58500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause-5.1(Design)	-	100	10% Discount for BIS
Clause-5.2(Size and Fitting)	-	250	10% Discount for BIS
Clause-5.3(Height of Upper)	-	250	10% Discount for BIS
Clause-5.4(Weight)	-	250	10% Discount for BIS
Clause-5.5.1(Construction)	-	250	10% Discount for BIS
Clause-5.5.2(Upper – Outsole Bond Strength)	-	600	10% Discount for BIS
Clause-5.5.3(Consolidation Test (For Type 1 and Type 2))	-	600	10% Discount for BIS
Clause-5.5.4(Ergonomic Features)	-	250	10% Discount for BIS
Clause-5.5.5(Slip Resistance)	-	1500	10% Discount for BIS
Clause-5.5.6(Energy Absorption of Seat Region)	-	600	10% Discount for BIS
Clause-5.5.7(Water Resistance)	-	600	10% Discount for BIS
Clause-5.6.1(Penetration Resistance)	-	600	10% Discount for BIS
Clause-5.6.2(Electrical Resistance (Antistatic))	-	2500	10% Discount for BIS
Clause-5.6.3(Heat Insulation of Sole Complex)	-	800	10% Discount for BIS
Clause-5.6.4(Cold Insulation of Sole Complex)	-	800	10% Discount for BIS
Clause-5.7.1(Material)	-	100	10% Discount for BIS
Clause-5.7.2(Tear Strength)	-	500	10% Discount for BIS
Clause-5.7.3(Water Vapour Permeability and Coefficient)	-	600	10% Discount for BIS
Clause-5.7.4(Colour Fastness: Light)	-	800	10% Discount for BIS
Clause-5.7.4(Colour Fastness:Washing)	-	800	10% Discount for BIS
Clause-5.8.2(Tear Strength)	-	500	10% Discount for BIS
Clause-5.8.3(Abrasion Resistance)	-	800	10% Discount for BIS
Clause-5.8.4(Water Vapour Permeability and Coefficient)	-	600	10% Discount for BIS
Clause-5.9.1(Tear Strength)	-	500	10% Discount for BIS
Clause-5.10.1(Binding Tape)	-	250	10% Discount for BIS
Clause-5.11.1(Closing Thread)	-	250	10% Discount for BIS
Clause-5.12.1(Material and Thickness)	-	250	10% Discount for BIS
Clause-5.12.2(Abrasion Resistance)	-	600	10% Discount for BIS
Clause-5.12.3(Water Absorption and Desorption)	-	600	10% Discount for BIS
Clause-5.13.1(Material and Thickness)	-	250	10% Discount for BIS
Clause-5.13.2(Abrasion Resistance)	-	800	10% Discount for BIS
Clause-5.13.3(Bond Strength of Textile Layer and Insock)	-	500	10% Discount for BIS
Clause-5.15(Toe Puff and Counter Stiffener)	-	250	10% Discount for BIS
Clause-5.16.1(Material)	-	250	10% Discount for BIS
Clause-5.16.2(Thickness)	-	250	10% Discount for BIS
Clause-5.16.3(Sole Density)	-	500	10% Discount for BIS
Clause-5.16.4(Hardness)	-	500	10% Discount for BIS
Clause-5.16.5(Ageing)	-	600	10% Discount for BIS
Clause-5.16.6(Tear Strength)	-	500	10% Discount for BIS
Clause-5.16.7(Abrasion Resistance)	-	600	10% Discount for BIS
Clause-5.16.8(Flexing Resistance)	-	600	10% Discount for BIS
Clause-5.16.9(Hydrolysis)	-	1500	10% Discount for BIS
Clause-5.16.10(Interlayer Bond Strength)	-	600	10% Discount for BIS
Clause-5.17(Eyelets)	-	250	10% Discount for BIS
Clause-5.18.1(Material)	-	250	10% Discount for BIS
Clause-5.18.2(Colour Fastness (Light, Washing))	-	800	10% Discount for BIS
Clause-5.18.3(Breaking Load and Tag Retention)	-	600	10% Discount for BIS
Clause-5.18.4.1(Lace to lace)	-	500	10% Discount for BIS
Clause-5.18.4.2(Lace to eyelet)	-	500	10% Discount for BIS
Clause-6, Table no. 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	30000	10% Discount for BIS
Clause-7(Marking)	-	0	10% Discount for BIS

15 May, 2027

-
Included w.e.f. 22.08.2024 Colour fastness to light test restricted to exposure cycle A1 , A3 & B only.

9405

Sleen India Biz venture Private Limited, Agra

9139736

IS 14544 (2022)

LEATHER SAFETY AND PROTECTIVE FOOTWEAR WITH DIRECT MOULDED POLYVINYL CHLORIDE PVC SOLE - SPECIFICATION First Revision

46000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
8.1(Cl. No. 5.10 of IC 15298(P-1):2015)	-	46000		10% Discount for BIS
8.2(Cl. No. 5.10 of IC 15298(P-1):2015)	-	46000		10% Discount for BIS

15 May, 2027

-
Included w.e.f. 09.09.2024

9406

CENTRAL POWER RESEARCH INSTITUTE (CPRI),NOIDA

8177224

IS 15959 (Part 1) : 2011 (2011)

Data exchange for electricity meter - Reading, tariff and load control - Companion specification

130250 View breakup
-

Clause No.	Exclusion	Remark
4(ARCHITECTURE)	-	inclusive
5, Table no. 3(LOGICAL STRUCTURE OF METERS)	-	inclusive
6(USAGE OF DLMS/COSEM PROVISIONS)	-	inclusive
7, Table no. 5,6,7(ASSOCIATION AND DATA SECURITY)	-	inclusive
8, Table no.8,9,10,11(EVENT HANDLING)	-	inclusive
9(TOU METERING)	-	inclusive
10, table no. 14, 15,16(BILLING PERIODS)	-	inclusive
11, table no. 17, 18(HISTORIC DATA )	-	inclusive
12, Table no.19(COMMUNICATION PROFILES)	-	inclusive
13(COMMUNICATION SETUP OBJECTS)	-	inclusive
14, Table no. 20(CONNECT/DISCONNECT CONTROL)	-	inclusive

25 Mar, 2027

-
3 PH 4 w METER

9407

Bharti Automation Pvt. Ltd.(A Testing Division), Gurugram

8141726

IS 398 : Part 1 (1996)

Aluminium conductors for overhead transmission purposes - Specification: Part 1 aluminium stranded conductors (Third Revision)

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Freedom from defects)	-	300	-
12.2, Table-1(Measurement of diameter of individual aluminium wire)	-	1200	-
12.3, Table-1(Breaking load before stranding)	-	1200	-
12.3, Table-1(Breaking load after stranding)	-	1200	-
12.4(Wrapping test)	-	1200	-
12.5, Table 1(Resistance test)	-	1200	-
12.6, Table 3(Measurement of lay ratio)	-	1200	-
6(Freedom from defects)	-	250	-
12.2, Table-1(Measurement of diameter of individual aluminium wire)	-	1200	-
12.3, Table-1(Breaking load before stranding)	-	1200	-
12.3, Table-1(Breaking load after stranding)	-	1200	-
12.4(Wrapping test)	-	1200	-
12.5, Table 1(Resistance test)	-	1200	-
12.6, Table 3(Measurement of lay ratio)	-	1200	-
9.3(Stranding)	-	0	-
7.2.1(Sizes)	-	200	-
8, 8.1, 8.2(Joint in wires, except during stranding)	-	0	-
9.2(Lay ratio)	-	200	-
9.4(Multiple layer of wires)	-	200	-
7.2.2(Resistance)	-	500	-
7.1.1(Nominal Sizes)	-	200	-
6(Freedom from defects)	-	250	-
12.2, Table-1(Measurement of diameter of individual aluminium wire)	-	1200	-
12.3, Table-1(Breaking load before stranding)	-	1200	-
12.3, Table-1(Breaking load after stranding)	-	1200	-
12.4(Wrapping test)	-	1200	-
12.5, Table 1(Resistance test)	-	1200	-
12.6, Table 3(Measurement of lay ratio)	-	1200	-
9.3(Stranding)	-	0	-
7.2.1(Sizes)	-	200	-
8, 8.1, 8.2(Joint in wires, except during stranding)	-	0	-
9.2(Lay ratio)	-	200	-
9.4(Multiple layer of wires)	-	200	-
7.2.2(Resistance)	-	500	-
7.1.1(Nominal Sizes)	-	200	-

05 Aug, 2027

-
-

9408

Quality Testing & Research Lab, Gautam Buddha Nagar

8184006

IS 15298 : part 4 (2017)

Personal protective equipment: Part 4 occupational footwear (Second Revision)

65500 View breakup
-

Clause No.	Exclusion	Remark
Table 1(CLASS I)	-	-
Table 1(CLASS II)	-	-
5.2.2.1(General)	-	-
5.2.2.2(Height of upper)	-	-
5.2.2.3(Seat region)	-	-
5.3.2.1(Construction)	-	-
5.3.1.2(Upper/outsole bond strength)	-	-
5.3.2.2(Leakproofness)	-	-
5.3.2.3(Specific ergonomic features )	-	-
5.3.4.1(Slip resistance)	-	-
5.3.4.2(Slip resistance on ceramic tile floor with sodium lauryl sulphate (SLS) solution)	-	-
5.3.4.3(Slip resistance on steel floor with glycerine )	-	-
5.3.4.4(Slip resistance on ceramic tile floor with SLS and on steel floor with glycerine )	-	-
5.3.2.5(Innocuousness )	-	-
5.4.2.1(Upper)	-	-
5.4.2.2(Thickness )	-	-
5.4.2.3(Tear strenth)	-	-
5.4.2.4(Tensile properties)	-	-
5.4.2.5(Flexing resistance )	-	-
5.4.2.6(Water vapour permeability and coefficient )	-	-
5.4.2.7(pH value )	-	-
5.4.2.8(Hydrolysis)	-	-
5.4.2.9(Chromium VI content )	-	-
5.5.2.1(Tear strength )	-	-
5.5.2.2(Abrasion resistance )	-	-
5.5.2.3(Water vapour permeability and coefficient )	-	-
5.5.2.4(pH value )	-	-
5.5.2.5(Chromium VI content )	-	-
5.6(Tongue )	-	-
5.6.2.1(Tear strength )	-	-
5.6.2.2(pH value )	-	-
5.6.2.3(Chromium VI content )	-	-
5.7.2.1(Insole and insock )	-	-
5.7.2.2(Insole and insock )	-	-
5.7.2.3(Water absorption and desorption )	-	-
5.7.4.1(Abrasion resistance )	-	-
5.7.4.2(Abrasion resistance )	-	-
5.7.2.5(Chromium VI content )	-	-
5.8.2.1(Outsole)	-	-
5.8.1.1(Thickness )	-	-
5.8.1.2(Cleated area )	-	-
5.8.2.2(Tear strength )	-	-
5.8.2.3(Abrasion resistance )	-	-
5.8.2.4(Flexing resistance )	-	-
5.8.2.5(Hydrolysis )	-	-
5.8.2.6(Interlayer bond strength )	-	-
6.2.1.1(Metallic anti-penetration insert )	-	-
6.2.1.1.2(Non-metallic anti-penetration insert used as an insole)	-	-
6.2.1.2(Construction)	-	-
6.2.1.3(Dimensions )	-	-
6.2.1.4(Flex resistance of penetration-resistant inserts )	-	-
6.2.1.5.1(Corrosion resistance of penetration-resistant metallic inserts)	-	-
6.2.1.5.2(Penetration-resistant non-metallic inserts)	-	-
6.2.2.1(Conductive footwear)	-	-
6.2.2.2(Antistatic footwear)	-	-
6.2.2.3(Electrically insulating footwear )	-	-
6.2.3.1(Heat insulation of sole complex )	-	-
6.2.3.2(Cold insulation of sole complex)	-	-
6.2.2.4(Energy absorption of seat region )	-	-
6.2.2.5(Water resistance )	-	-
6.2.2.6(Ankle protection)	-	-
6.2.7.1(Cut resistance foot wear)	-	-
6.2.7.2(Cut resistance foot wear)	-	-
6.2.7.3(Resistance to cutting)	-	-
6.2.7.4(Pentration resistance)	-	-
6.3.2.2(Upper- water penetration)	-	-
6.4.2.1(Resistance to hot contact)	-	-
6.4.2.2(Resistance to fuel oil)	-	-
7(a)(Marking)	-	-
7(b)(Marking)	-	-
7(c)(Marking)	-	-
7(d)(Marking)	-	-
7(e)(Marking)	-	-
7(e)(Marking)	-	-

23 Feb, 2028

-
Exclusion: Ankle Protection, Nickel as per IS 17011:2018

9409

Quality Testing & Research Lab, Gautam Buddha Nagar

8184006

IS 15844 : Part 2 (2023)

SPORTS FOOTWEAR PART -2 PERFORMANCE SPORTS FOOTWEAR

40000 View breakup
-

Clause No.	Exclusion	Remark
4(SAMPLING AND CONDITIONING)	-	-
5(DESIGN)	-	-
6(SIZE AND FITTINGS)	-	-
7.1.1(Whole Footwear)	-	-
7.1.2(Upper to Mid Sole/Out Sole Bond Performance)	-	-
7.1.3("Upper to Composite Sole Bond Performance (Applicable Only When the Sole is Composite)")	-	-
7.1.4(Out Sole to Mid Sole (Multilayer) Bond Performance)	-	-
7.1.5(Energy Absorption at Seat Region)	-	-
7.1.6(Complete Shoe Flexing)	-	-
7.1.7(Washability)	-	-
7.1.8(Slip Resistance)	-	-
7.1.9(Heel Drop)	-	-
7.2 , Table No. 2 , i)(Flexing resistance)	-	-
7.2 , Table No. 2 , ii)(Tear strength (average force))	-	-
7.2 , Table No. 2 , iii)("Colour fastness rubbing (To and fro) Grey scale rate Dry: (rubbing) Rating: (Marring and staining) ")	-	-
7.2 , Table No. 2 , iv) ,a)(Water vapour permeability)	-	-
7.2 , Table No. 2 , iv) ,b)(Water vapour coefficient)	-	-
7.2 , Table No. 2 , v)(Stitch tear strength (double hole))	-	-
7.2 , Table No. 2 , vi)("Colour fastness to light (Optional) Grey scale rate, Rating: (Marring)")	-	-
7.2 , Table No. 2 , vii)(Tensile strength)	-	-
7.2 , Table No. 2 , viii)(Elongation at break,)	-	-
7.2 , Table No. 2 , ix)("Water penetration and water absorption after 60 Minutes Water absorption %, Max Water penetration Gms, Max")	-	-
7.2 , Table No. 2 , x)(Abrasion test (for unlined upper))	-	-
7.2 , Table No. 3 , i)(Breaking strength "As per Method 1 of IS 7016 (Part 2)/ ISO 1421 : 2016 or ISO 17706")	-	-
7.2 , Table No. 3 , ii)(Elongation at break)	-	-
7.2 , Table No. 3 , iii)(Tear strength, N, Min For Fabric: For all other materials)	-	-
7.2 , Table No. 3 , iv)(Strength at needle perforation)	-	-
7.2 , Table No. 3 , v)("Flexing resistance, no crack/damage to coating/ lamination / upper material till prescribed cycles")	-	-
7.2 , Table No. 3 , vi) , a)(Water vapour permeability,)	-	-
7.2 , Table No. 3 , vi) , b)("Water vapour coefficient, ")	-	-
7.2 , Table No. 3 , vii)(Hydrolysis resistance)	-	-
7.2 , Table No. 3 , viii)(Colour fastness to light grey scale rate)	-	-
7.2 , Table No. 3 , ix)(Bursting Strength,)	-	-
7.3 , Table No. 4 , i)(Tear strength,)	-	-
7.3 , Table No. 4 , ii)(Abrasion resistance, cycles)	-	-
7.3 , Table No. 4 , iii)("Colour fastness to rubbing (crocking), Grey scale rate with 10 rubs on dry or wet, ")	-	-
7.3 , Table No. 4 , iv)("Colour fastness to perspiration (contact method) Grey scale rate, ")	-	-
7.3 , Table No. 4 , v) , a)(Water vapour permeability,)	-	-
7.3 , Table No. 4 , v) , b)("Water vapour coefficient, " As per IS 15298 (Part 1))	-	-
7.4 , Table No. 5 , i)(Thickness)	-	-
7.4 , Table No. 5 , ii)(Flexing index)	-	-
7.4 , Table No. 5 , iii)(Abrasion resistance, at 400 cycles)	-	-
7.4 , Table No. 5 , iv) , a)(Water Absorption,)	-	-
7.4 , Table No. 5 , iv) , b)(Water Desorption)	-	-
7.5 , Table No. 6 , i)(Thickness)	-	-
7.5 , Table No. 6 , ii)(Abrasion resistance, cycles As per IS 15298 (Part 1))	-	-
7.5 , Table No. 6 , iii) , a)(Water Absorption)	-	-
7.5 , Table No. 6 , iii) , b)(Water Desorption)	-	-
7.5 , Table No. 6 , iv)(Heat resistance shrinkage linear)	-	-
7.6 , Table No. 7 , i)(Abrasion resistance (volume loss))	-	-
7.6 , Table No. 7 , ii)(Flexing resistance)	-	-
7.6 , Table No. 7 , iii)(Hydrolysis resistance, cut growth after 1 50 000 flexes)	-	-
7.6 , Table No. 7 , iv)(Tear strength)	-	-
7.6 , Table No. 7 , v)(Tensile strength)	-	-
7.6 , Table No. 7 , vi)(Elongation at break)	-	-
7.6 , Table No. 7 , vii)(Compression set)	-	-
7.7 , Table No. 8 , i)(Compression set)	-	-
7.7 , Table No. 8 , ii)(Split tear strength,)	-	-
7.7 , Table No. 8 , iii)(Heat shrinkage,)	-	-
7.7 , Table No. 8 , iv)(Elongation at break,)	-	-
7.8 , Table No. 9 , i)(First dry collapsing load, hardness)	-	-
7.8 , Table No. 9 , ii)(Resilience)	-	-
7.8 , Table No. 9 , iii)(Moisture resistance)	-	-
7.8 , Table No. 9 , iv) , a)(Initial dry area shape retention)	-	-
7.8 , Table No. 9 , iv) , b)(Area shape retention after 10th collapse, dry)	-	-
7.8 , Table No. 9 , v)(Peel strength)	-	-
7.9 , Table No. 10 , i)(Peel strength)	-	-
7.9 , Table No. 10 , ii)(Shear strength)	-	-
7.10 , Table No. 11 , i)(Limit of useful extension,)	-	-
7.10 , Table No. 11 , ii)(Needle strength,)	-	-
7.11 , Table No. 12 , i)(Breaking strength of lace,)	-	-
7.11 , Table No. 12 , ii)(Lace tag strength,)	-	-
7.11 , Table No. 12 , iii)(Lace to lace abrasion,)	-	-
7.11 , Table No. 12 , iv)("Colour fastness to water Gray Scale Rate")	-	-
7.11 , Table No. 12 , v)(Strength of Buckle/Ski hook)	-	-
7.11 , Table No. 12 , vi)(Corrosion resistance)	-	-
7.12("Chemical Requirement on Complete Product for All Types of Sports Shoe")	-	-
8(MARKING AND PACKING)	-	-
7.12, Table no. 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	-
7.12, Table no. 1 of IS 17011,(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	-
7.12, Table no. 1 of IS 17011,(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	-
7.12, Table no. 1 of IS 17011,(iv)(Chromium (VI))	-	-
7.12, Table no. 1 of IS 17011,(v)(Dimethyl fumarate (DMFU))	-	-
7.12, Table no. 1 of IS 17011,(vi)(Formaldehyde (free or released by partial hydrolysis))	-	-
7.12, Table no. 1 of IS 17011,(vii)(Formaldehyde)	-	-
7.12, Table no. 1 of IS 17011,(viii)(Organotin compounds)	-	-
7.12, Table no. 1 of IS 17011,(ix)(PCP-TeCP-TriCP polychlorophenols)	-	-
7.12, Table no. 1 of IS 17011,(x)(pH)	-	-
7.12, Table no. 1 of IS 17011,(xi)(Phthalates (each individual phthalate))	-	-
7.12, Table no. 1 of IS 17011,(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	-

23 Feb, 2028

-
Exclusion: Nickel as per IS 17011:2018, Colour fastness to light

9410

Quality Testing & Research Lab, Gautam Buddha Nagar

8184006

IS 15844 : Part 1 (2023)

SPORTS FOOTWEAR PART -1 GENERAL PURPOSEFirst Revision

40000 View breakup
-

Clause No.	Exclusion	Remark
Cl No.4.1(Sampling and Conditioning)	-	-
Cl No.4.2(Construction)	-	-
Cl No.4.3(Whole Footwear)	-	-
4.3.1(Insole)	-	-
4.3.2(Toe spring height)	-	-
4.3.3(Upper to Mid Sole/Out Sole Bond Performance)	-	-
4.3.4("Upper to Composite Sole Bond Performance (Applicable Only When the Sole is Composite)")	-	-
4.3.5(Out Sole to Mid Sole (Multilayer) Bond Performance)	-	-
4.3.6(Energy Absorption at Seat Region)	-	-
4.3.7(Complete Shoe Flexing)	-	-
4.3.8(Washability)	-	-
4.3.9(Slip Resistance)	-	-
Cl No.4.4 , Table No. 2 , i) , a)(Flexing resistance, Dry condition)	-	-
Cl No.4.4 , Table No. 2 , i) , b)(Flexing resistance, Wet condition)	-	-
Cl No.4.4 , Table No. 2 , ii)(Tear strength (average force), Min, N)	-	-
Cl No.4.4 , Table No. 2 , iii) , a)("Colour fastness rubbing (To and fro) Grey scale rate, Min , Dry: (rubbing) Rating: (Marring and staining) ")	-	-
Cl No.4.4 , Table No. 2 , iii) , b)("Colour fastness rubbing (To and fro) Grey scale rate, Min , Wet: (rubbing) Rating: (Marring and staining)")	-	-
Cl No.4.4 , Table No. 2 , iv) , a)(Water vapour permeability, mg/cm2h, Min)	-	-
Cl No.4.4 , Table No. 2 , iv) , b)(Water vapour coefficient, mg/cm2 , Min)	-	-
Cl No.4.4 , Table No. 2 , v)(Stitch tear strength (double hole), N/mm, Min)	-	-
Cl No.4.4 , Table No. 2 , vi)("Colour fastness to light (Optional) Grey scale rate, Min Rating: (Marring)")	-	-
Cl No.4.4 , Table No. 2 , i)(Breaking strength, N/mm, Min)	-	-
Cl No.4.4 , Table No. 2 , ii)(Elongation at break, percent Min)	-	-
Cl No.4.4 , Table No. 2 , iii)(Tear strength, N, Min For Fabric: For all other materials)	-	-
Cl No.4.4 , Table No. 2 , iv) , a)(Flexing resistance, Dry condition)	-	-
Cl No.4.4 , Table No. 2 , iv) , b)(Flexing resistance, ,Wet condition)	-	-
Cl No.4.4 , Table No. 2 , v) , a)(Water vapour permeability, mg/cm2h, Min)	-	-
Cl No.4.4 , Table No. 2 , v) , b)("Water vapour coefficient, mg/cm2 , Min ")	-	-
Cl No.4.4 , Table No. 2 , vi)(Hydrolysis resistance)	-	-
Cl No.4.4 , Table No. 2 , vii)(Bursting Strength, kg/cm2 , Min)	-	-
Cl No.4.5 , Table No. 3 , i)(Tear strength, N, Min)	-	-
Cl No.4.5 , Table No. 3 , ii)(Abrasion resistance, cycles)	-	-
Cl No.4.5 , Table No. 3 , iii)("Colour fastness to rubbing (crocking), Grey scale rate with 10 rubs on dry or wet, Min")	-	-
Cl No.4.5 , Table No. 3 , v) , a)(Water vapour permeability, mg/cm2h, Min)	-	-
Cl No.4.5 , Table No. 3 , v) , b)("Water vapour coefficient, mg/cm2 , Min ")	-	-
Cl No.4.6 , Table No. 4 , i)(Thickness, mm, Min)	-	-
Cl No.4.6 , Table No. 4 , ii)(Flexing index, Min)	-	-
Cl No.4.6 , Table No. 4 , iii)(Abrasion resistance, at 400 cycles)	-	-
Cl No.4.6 , Table No. 4 , iv) , a)(Water Absorption, mg/cm2 , Min)	-	-
Cl No.4.6 , Table No. 4 , iv) , b)(Water Desorption, percent, Min)	-	-
Cl No.4.7, Table No. 5 , i)(Thickness, mm, Min)	-	-
Cl No.4.7, Table No. 5 , ii)(Abrasion resistance, cycles)	-	-
Cl No.4.7, Table No. 5 , iii) , a)(Water Absorption, mg/cm2 , Min)	-	-
Cl No.4.7, Table No. 5 , iii) , b)(Water Desorption, percent, Min)	-	-
Cl No.4.8 , Table No. 6 , i)(Abrasion resistance (Volume loss), mm3 , Max)	-	-
Cl No.4.8 , Table No. 6 , ii)("Flexing resistance Belt Method at 90 diameter Mandrel or Bennewart method, cut growth, Max")	-	-
Cl No.4.8 , Table No. 6 , iii)("Hydrolysis resistance, cut growth after 150 000 flexes, in mm, Max")	-	-
Cl No.4.9 , Table No. 7 , i)(Compression set, percent, Max)	-	-
Cl No.4.9 , Table No. 7 , ii)(Split tear strength, kg/25 mm, Min)	-	-
Cl No.4.9 , Table No. 7 , iii)(Heat shrinkage, percent, Max)	-	-
Cl No.4.10 , Table No. 8 , i)(First dry collapsing load, hardness, N, Min)	-	-
Cl No.4.10 , Table No. 8 , ii)(Resilience, percent, Min)	-	-
Cl No.4.10 , Table No. 8 , iii)(Moisture resistance, percent, Min)	-	-
Cl No.4.10 , Table No. 8 , iv) , a)(Initial dry area shape retention, percent, Min)	-	-
Cl No.4.10 , Table No. 8 , iv) , b)(Area shape retention after 10th collapse, dry, percent, Min)	-	-
Cl No.4.11 , Table No. 9 , i)(Peel strength, N/mm, Min)	-	-
Cl No.4.11 , Table No. 9 , ii)(Shear strength, kPa , Min)	-	-
Cl No.4.12 , Table No. 10 , i)(Limit of useful extension, percent, Min)	-	-
Cl No.4.13 , Table No. 11 , i)(Breaking strength of lace, N, Min)	-	-
Cl No.4.13 , Table No. 11 , ii)(Lace tag strength, N, Min)	-	-
Cl No.4.13 , Table No. 11 , iii)(Lace to lace abrasion,)	-	-
Cl No.4.13 , Table No. 11 , iv)("Colour fastness to water Gray Scale Rate, Min Rating")	-	-
Cl No.4.13 , Table No. 11 , v)(Strength of Buckle/Ski hook, N, Min)	-	-
Cl No.4.13 , Table No. 11 , vi)(Corrosion resistance)	-	-
Cl No . 4.14("Chemical Requirement on Complete Product for all Types of Sports Shoe")	-	-
Cl No . 5(MARKING AND PACKING)	-	-
Clause 4.2 - 4.2.1(Construction)	-	-
Clause 4.2 - 4.2.2(Construction)	-	-
Clause 4.3 - 4.3.1(Whole Footwear)	-	-
Clause 4.3 - 4.3.2(Whole Footwear)	-	-
Clause 4.3 - 4.3.3(Upper to Mid Sole/Out Sole Bond Performance)	-	-
Clause 4.3 - 4.3.4(Upper to Composite Sole Bond Performance(Applicable Only When the Sole is Composite))	-	-
Clause 4.3 - 4.3.5(Out Sole to Mid Sole (Multilayer) Bond)	-	-
Clause 4.3 - 4.3.7(Complete Shoe Flexing)	-	-
Clause 4.4, Table 1 ii)(Tear strength)	-	-
Clause 4.4, Table 1 iv)-a(Water Vapour Permeability)	-	-
Clause 4.4, Table 1 v)(Stitch Tear Strength(Double Hole))	-	-
Clause 4.4, Table 2 i)(Breaking Strength)	-	-
Clause 4.4, Table 2 ii)(Elongation at break)	-	-
Clause 4.4, Table 2 iii)(Tear strength)	-	-
Clause 4.4, Table 2 v)-a(Water Vapour Permeability)	-	-
Clause 4.4, Table 2 v)-b(Water Vapour Coeffecient)	-	-
Clause 4.5, Table 3 i)(Tear strength)	-	-
Clause 4.5, Table 3 ii)(Abrasion Resistance)	-	-
Clause 4.5, Table 3 v)-a(Water Vapour Permeability)	-	-
Clause 4.5, Table 3 v)-b(Water Vapour Coeffecient)	-	-
Clause 4.6, Table 4 i)(Thickness)	-	-
Clause 4.6, Table 4 ii)(Abrasion Resistance)	-	-
Clause 4.6, Table 4 iv)-a(Water Absorption)	-	-
Clause 4.6, Table 4 iv)-b(Water Desorption)	-	-
Clause 4.7, Table 5 i)(Thickness)	-	-
Clause 4.7, Table 5 ii)(Abrasion Resistance)	-	-
Clause 4.7, Table 5 iii)-a(Water Absorption)	-	-
Clause 4.7, Table 5 iii)-b(Water Desorption)	-	-
Clause 4.8, Table 6 i)(Abrasion Resistance)	-	-
Clause 4.8, Table 6 ii)(Flexing Resistance)	-	-
Clause 4.8, Table 6 iii)(Hydrolysis Resistance)	-	-
Clause 4.9, Table 7 ii)(Split Tear strength)	-	-
Clause 4.9, Table 7 iii)(Heat shrinkage)	-	-
Cl No . 4.14, Table no. 1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	-
Cl No . 4.14, Table no. 1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	-
Cl No . 4.14, Table no. 1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	-
Cl No . 4.14, Table no. 1 of IS 17011(iv)(Chromium (VI))	-	-
Cl No . 4.14, Table no. 1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	-
Cl No . 4.14, Table no. 1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	-
Cl No . 4.14, Table no. 1 of IS 17011(vii)(Formaldehyde)	-	-
Cl No . 4.14, Table no. 1 of IS 17011(viii)(Organotin compounds)	-	-
Cl No . 4.14, Table no. 1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	-
Cl No . 4.14, Table no. 1 of IS 17011(x)(pH)	-	-
Cl No . 4.14, Table no. 1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	-
Cl No . 4.14, Table no. 1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	-
Cl No.4.5 , Table No. 3 , iv)("Colour fastness to perspiration (contact method) Grey scale rate, Min")	-	-
Clause 4.4, Table 1 iv)-b(Water Vapour Coeffecient)	-	-

23 Feb, 2028

-
Exclusion: Nickel as per IS 17011:2018, Colour fastness to light

9411

Quality Testing & Research Lab, Gautam Buddha Nagar

8184006

IS 6664 (1992)

Rubber microcellular sheets for soles and heels - Specification (First Revision)

47400 View breakup
-

Clause No.	Exclusion	Remark
4.2(Flexing resistance )	-	-
4.2(Water absorption)	-	-
4.2(Heat Shrinkage )	-	-
4.2(Shrinkage at room temp)	-	-
4.2(Split tear strength)	-	-
4.2(Compression set)	-	-
4.2(Hardness (Shore A))	-	-
4.2(Density )	-	-
4.2(Size & Thickness )	-	-
4, Cl.4.1,4.1.1,4.1.2(Requirements)	-	-
Cl.4 Cl.4.1.3 And 8.3,Table1, i)(Relative density)	-	-
Cl.4.1.3 And 8.3,Table1, iii)(Hardness, Shore A durometer min)	-	-
Cl.4 Cl.4.1.3 And 8.3,Table1, iii)(Change in Hardness after ageing at 100±1°C for 24hr)	-	-
Cl.4 Cl.4.1.3 And 8.3,Table1, iv)(Compression set at constant stress percent, Max)	-	-
Cl.4 Cl.4.1.3 And 8.3,Table1, v)(Split tear strength, kg,Min)	-	-
Cl.4 Cl.4.1.3 And 8.3,Table1, vi)(Room Temperature shrinkage at 27±2°C for 2weeks, percent, Max)	-	-
Cl.4 Cl.4.1.3 And 8.3,Table 1, vi)(Heat shrinkage test at 100±1°C for 1 hour max)	-	-
Cl.4 Cl.4.1.3 And 8.3,Table1, viii)(Water absorption , percent by mass, Max)	-	-
Cl.4 Cl.4.1.3 And 8.3,Table 1, viii)(Flexing resistance: Maximum cut growth at 50 000 cycles)	-	-
5, 5.1(Marking)	-	-
6, 6.1(Packing)	-	-
"Cl.4 ,Cl.4.1,4.1.1,4.1.2(Requirements ")	-	-
Cl.4.1.3 And 8.3,Table1(i) Relative density)	-	-
Cl.4.1.3 And 8.3,Table1(ii) Hardness, Shore A durometer min)	-	-
Cl.4.1.3 And 8.3,Table1(iii) Change in Hardness after ageing at 100±1°C for 24hr)	-	-
Cl.4.1.3 And 8.3,Table1(vi) Room Temperature shrinkage at 27±2°C for 2weeks, percent, Max)	-	-
Cl.4.1.3 And 8.3,Table 1 vi(Heat shrinkage test at 100±1°C for 1 hour max)	-	-
Cl.4.1.3 And 8.3,Table1(viii)Water absorption , percent by mass, Max)	-	-
Cl.4.1.3 And 8.3,Table1(ix)Flexing resistance)	-	-
5, 5.1(Marking)	-	-
6, 6.1(Packing)	-	-
Cl.4.1.3 And 8.3,Table1(iv) Compression set at constant stress percent, Max)	-	-

23 Feb, 2028

-
-

9412

Bombay Textiles Research Association (BTRA), Mumbai

7130206

IS 17265 (2023)

Textiles 100 Percent Polyester Spun Grey and White Yarns Specification Second Revision

103860 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.No. 6.4, Table no. 5(Yarn Unevenness and Yarn Imperfections)	-	400	-
Cl.No. 4(CLASSIFICATIONS)	-	2200	-
Cl.No. 5.1, Table no. 1("Designation of Yarn ")	-	2200	-
Cl.No. 6.1,6.2,8.2. Table no. 3(ii)(Twist per metre,)	-	350	-
Cl.No. 6.1,6.2,8.2. Table no. 3(iii)(Average Single yarn tenacity)	-	800	-
Cl.No. 6.1,6.2,8.2. Table no. 3(iv)(Elongation)	-	800	-
Cl.No. 6.1,6.2,8.2. Table no. 3(v)(Average Count strength product (CSP))	-	800	-
Cl.No. 6.1,6.2 Table no. 4(vi)(Anti-microbial activity value)	-	4800	-
Cl.No. 6.3(Freedom from Yarn Defects)	-	1000	-
Cl.No. 6.1,6.2 Table no. 4(ii)(Isophthalic Acid (IPA) content)	-	6000	-
Cl.No. 6.8, Table no. 8(i)(Free and releasable formaldehyde)	-	2500	-
Cl.No. 6.8, Table no. 8(ii)("Extractable heavy metals by artificial Acidic sweat/saliva")	-	5000	-
Cl.No. 6.8, Table no. 8(iii)(Pentachlorophenol)	-	3000	-
Cl.No. 6.8, Table no. 8(vi)(Banned azo colourants (arylamines))	-	4500	-
Cl.No.5.2 , Table no. 2(IDENTIFICATION AND DESCRIPTION)	-	6500	-
Cl.No. 6.1,6.2,8.2. Table no. 3(vii)(Whiteness index of polyester spun yarn)	-	1000	-
Cl.No. 6.1,6.2 Table no. 4(i)(Moisture regain)	-	1000	-
Cl.No. 6.1,6.2 Table no. 4(iii)(Water soluble matter)	-	1000	-
Cl.No. 6.1,6.2 Table no. 4(iv)(Phosphorus content)	-	1500	-
Cl.No. 6.1,6.2 Table no. 4(vii)("Wettability of woven or knitted fabrics (about 150 gsm) made from the yarns")	-	1000	-
Cl.No. 6.1,6.2,8.2. Table no. 4(viii)("Wicking characteristic of woven or knitted fabrics (about 150 gsm) made from the yarn")	-	750	-
Cl.No. 6.7, Table no. 7(i)("Light ")	-	7000	-
Cl.No. 6.7, Table no. 7(ii)(Washing)	-	500	-
Cl.No. 6.7, Table no. 7(iii)(Rubbing)	-	250	-
Cl.No. 6.7, Table no. 7(iv)(Perspiration)	-	500	-
Cl.No. 6.6(Commercial Mass)	-	500	-
Cl.No. 6.1,6.2 Table no. 4(v)(Ultraviolet resistance)	-	47000	-
Cl.No. 6.1,6.2,8.2. Table no. 3(i)(Mean linear density (Count))	-	1000	-
Cl.No. 6.4, Table no. 5(Yarn Unevenness and Yarn Imperfections)	-	0	REPEATED
Cl.No. 4(CLASSIFICATIONS)	-	0	REPEATED
Cl.No. 5.1, Table no. 1("Designation of Yarn ")	-	0	REPEATED
Cl.No. 6.1,6.2,8.2. Table no. 3(ii)(Twist per metre,)	-	0	REPEATED
Cl.No. 6.1,6.2,8.2. Table no. 3(iii)(Average Single yarn tenacity)	-	0	REPEATED
Cl.No. 6.1,6.2,8.2. Table no. 3(iv)(Elongation)	-	0	REPEATED
Cl.No. 6.1,6.2,8.2. Table no. 3(v)(Average Count strength product (CSP))	-	0	REPEATED
Cl.No. 6.1,6.2 Table no. 4(vi)(Anti-microbial activity value)	-	0	REPEATED
Cl.No. 6.3(Freedom from Yarn Defects)	-	0	REPEATED
Cl.No. 6.1,6.2 Table no. 4(ii)(Isophthalic Acid (IPA) content)	-	0	REPEATED
Cl.No. 6.8, Table no. 8(i)(Free and releasable formaldehyde)	-	0	REPEATED
Cl.No. 6.8, Table no. 8(ii)("Extractable heavy metals by artificial Acidic sweat/saliva")	-	0	REPEATED
Cl.No. 6.8, Table no. 8(iii)(Pentachlorophenol)	-	0	REPEATED
Cl.No. 6.8, Table no. 8(vi)(Banned azo colourants (arylamines))	-	0	REPEATED
Cl.No.5.2 , Table no. 2(IDENTIFICATION AND DESCRIPTION)	-	0	REPEATED
Cl.No. 6.1,6.2,8.2. Table no. 3(vii)(Whiteness index of polyester spun yarn)	-	0	REPEATED
Cl.No. 6.1,6.2 Table no. 4(i)(Moisture regain)	-	0	REPEATED
Cl.No. 6.1,6.2 Table no. 4(iii)(Water soluble matter)	-	0	REPEATED
Cl.No. 6.1,6.2 Table no. 4(iv)(Phosphorus content)	-	0	REPEATED
Cl.No. 6.1,6.2 Table no. 4(vii)("Wettability of woven or knitted fabrics (about 150 gsm) made from the yarns")	-	0	REPEATED
Cl.No. 6.1,6.2,8.2. Table no. 4(viii)("Wicking characteristic of woven or knitted fabrics (about 150 gsm) made from the yarn")	-	0	REPEATED
Cl.No. 6.7, Table no. 7(i)("Light ")	-	0	REPEATED
Cl.No. 6.7, Table no. 7(ii)(Washing)	-	0	REPEATED
Cl.No. 6.7, Table no. 7(iii)(Rubbing)	-	0	REPEATED
Cl.No. 6.7, Table no. 7(iv)(Perspiration)	-	0	REPEATED
Cl.No. 6.6(Commercial Mass)	-	0	REPEATED
Cl.No. 6.1,6.2 Table no. 4(v)(Ultraviolet resistance)	-	0	REPEATED
Cl.No. 6.1,6.2,8.2. Table no. 3(i)(Mean linear density (Count))	-	0	REPEATED
Cl.No. 6.4, Table no. 5(Yarn Unevenness and Yarn Imperfections)	-	0	REPEATED
Cl.No. 4(CLASSIFICATIONS)	-	0	REPEATED
Cl.No. 5.1, Table no. 1("Designation of Yarn ")	-	0	REPEATED
Cl.No. 6.1,6.2,8.2. Table no. 3(ii)(Twist per metre,)	-	0	REPEATED
Cl.No. 6.1,6.2,8.2. Table no. 3(iii)(Average Single yarn tenacity)	-	0	REPEATED
Cl.No. 6.1,6.2,8.2. Table no. 3(iv)(Elongation)	-	0	REPEATED
Cl.No. 6.1,6.2,8.2. Table no. 3(v)(Average Count strength product (CSP))	-	0	REPEATED
Cl.No. 6.1,6.2 Table no. 4(vi)(Anti-microbial activity value)	-	0	REPEATED
Cl.No. 6.3(Freedom from Yarn Defects)	-	0	REPEATED
Cl.No. 6.1,6.2 Table no. 4(ii)(Isophthalic Acid (IPA) content)	-	0	REPEATED
Cl.No. 6.8, Table no. 8(i)(Free and releasable formaldehyde)	-	0	REPEATED
Cl.No. 6.8, Table no. 8(ii)("Extractable heavy metals by artificial Acidic sweat/saliva")	-	0	REPEATED
Cl.No. 6.8, Table no. 8(iii)(Pentachlorophenol)	-	0	REPEATED
Cl.No. 6.8, Table no. 8(vi)(Banned azo colourants (arylamines))	-	0	REPEATED
Cl.No.5.2 , Table no. 2(IDENTIFICATION AND DESCRIPTION)	-	0	REPEATED
Cl.No. 6.1,6.2,8.2. Table no. 3(vii)(Whiteness index of polyester spun yarn)	-	0	REPEATED
Cl.No. 6.1,6.2 Table no. 4(i)(Moisture regain)	-	0	REPEATED
Cl.No. 6.1,6.2 Table no. 4(iii)(Water soluble matter)	-	0	REPEATED
Cl.No. 6.1,6.2 Table no. 4(iv)(Phosphorus content)	-	0	REPEATED
Cl.No. 6.1,6.2 Table no. 4(vii)("Wettability of woven or knitted fabrics (about 150 gsm) made from the yarns")	-	0	REPEATED
Cl.No. 6.1,6.2,8.2. Table no. 4(viii)("Wicking characteristic of woven or knitted fabrics (about 150 gsm) made from the yarn")	-	0	REPEATED
Cl.No. 6.7, Table no. 7(i)("Light ")	-	0	REPEATED
Cl.No. 6.7, Table no. 7(ii)(Washing)	-	0	REPEATED
Cl.No. 6.7, Table no. 7(iii)(Rubbing)	-	0	REPEATED
Cl.No. 6.7, Table no. 7(iv)(Perspiration)	-	0	REPEATED
Cl.No. 6.6(Commercial Mass)	-	0	REPEATED
Cl.No. 6.1,6.2 Table no. 4(v)(Ultraviolet resistance)	-	0	REPEATED
Cl.No. 6.1,6.2,8.2. Table no. 3(i)(Mean linear density (Count))	-	0	REPEATED
Cl.No. 6.4, Table no. 5(Yarn Unevenness and Yarn Imperfections)	-	0	-
Cl.No. 4(CLASSIFICATIONS)	-	0	REPEATED
Cl.No. 5.1, Table no. 1("Designation of Yarn ")	-	0	REPEATED
Cl.No. 6.1,6.2,8.2. Table no. 3(ii)(Twist per metre,)	-	0	REPEATED
Cl.No. 6.1,6.2,8.2. Table no. 3(iii)(Average Single yarn tenacity)	-	0	REPEATED
Cl.No. 6.1,6.2,8.2. Table no. 3(iv)(Elongation)	-	0	REPEATED
Cl.No. 6.1,6.2,8.2. Table no. 3(v)(Average Count strength product (CSP))	-	0	REPEATED
Cl.No. 6.1,6.2 Table no. 4(vi)(Anti-microbial activity value)	-	0	REPEATED
Cl.No. 6.3(Freedom from Yarn Defects)	-	0	REPEATED
Cl.No. 6.1,6.2 Table no. 4(ii)(Isophthalic Acid (IPA) content)	-	0	REPEATED
Cl.No. 6.8, Table no. 8(i)(Free and releasable formaldehyde)	-	0	REPEATED
Cl.No. 6.8, Table no. 8(ii)("Extractable heavy metals by artificial Acidic sweat/saliva")	-	0	-
Cl.No. 6.8, Table no. 8(iii)(Pentachlorophenol)	-	0	-
Cl.No. 6.8, Table no. 8(vi)(Banned azo colourants (arylamines))	-	0	-
Cl.No.5.2 , Table no. 2(IDENTIFICATION AND DESCRIPTION)	-	0	-
Cl.No. 6.1,6.2,8.2. Table no. 3(vii)(Whiteness index of polyester spun yarn)	-	0	-
Cl.No. 6.1,6.2 Table no. 4(i)(Moisture regain)	-	0	-
Cl.No. 6.1,6.2 Table no. 4(iii)(Water soluble matter)	-	0	-
Cl.No. 6.1,6.2 Table no. 4(iv)(Phosphorus content)	-	0	-
Cl.No. 6.1,6.2 Table no. 4(vii)("Wettability of woven or knitted fabrics (about 150 gsm) made from the yarns")	-	0	-
Cl.No. 6.1,6.2,8.2. Table no. 4(viii)("Wicking characteristic of woven or knitted fabrics (about 150 gsm) made from the yarn")	-	0	-
Cl.No. 6.7, Table no. 7(i)("Light ")	-	0	-
Cl.No. 6.7, Table no. 7(ii)(Washing)	-	0	-
Cl.No. 6.7, Table no. 7(iii)(Rubbing)	-	0	-
Cl.No. 6.7, Table no. 7(iv)(Perspiration)	-	0	-
Cl.No. 6.6(Commercial Mass)	-	0	-
Cl.No. 6.1,6.2 Table no. 4(v)(Ultraviolet resistance)	-	0	-
Cl.No. 6.1,6.2,8.2. Table no. 3(i)(Mean linear density (Count))	-	0	-

-
-

9413

Aaditech Test and Calibration Lab LLP

8179926

IS 374 (2019)

Specification for electric ceiling type fans and regulators (Third Revision)

22000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	500	-
8.1(Marking (as per Cl. 7 of IS 302-2-80:2017))	-	800	-
8.1,a(Marking )	-	800	-
8.1,b(Marking )	-	800	-
8.1,c(Marking )	-	800	-
8.1,d(Marking )	-	800	-
8.1,e(Marking )	-	800	-
8.1,f(Marking )	-	800	-
8.1,g(Marking )	-	800	-
8.2(Marking )	-	800	-
8.3,a(Marking )	-	800	-
8.3,b(Marking )	-	800	-
8.3,c(Marking )	-	800	-
8.3,d(Marking )	-	800	-
8.3,e(Marking )	-	800	-
8.4(Marking )	-	800	-
8(Marking (as per Cl. 7.1 of IS 302-2-80:2017))	-	800	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1 (f) of IS 302-1:2008))	-	800	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1(g) of IS 302-1:2008))	-	800	-
8(Marking (as per Cl.7.12.1(a) of IS 302-2-80:2017))	-	800	-
6.2(Rating)	-	500	-
9(Protection against access to live parts (as per Cl.8 of IS 302-2-80 :2017))	-	1000	-
9(Power Input & current (as per Cl.10 of IS 302-2-80 :2017))	-	1000	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	1000	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	1000	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	1000	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	1000	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	1000	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	1000	-
9(Transient over Voltage (as per Cl.14 of IS 302-2-80 :2017))	-	1000	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	1500	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	1500	-
9(Overload protection of transformers and associated circuits (as per Cl.17 of IS 302-2-80 :2017))	-	1000	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	1000	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	1000	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	1000	-
9(Staibilty and mechanical hazards (as per Cl.20.102, Table 101 of IS 302-2-80 :2017))	-	1000	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008))	-	1000	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-2:2008))	-	1000	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017))	-	1000	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	1000	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	1000	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	1000	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	1000	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	1000	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	1000	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	1000	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	1000	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	1000	-
9(Components (as per Cl.24.103 of IS 302-2-80 :2017))	-	1000	-
9(Components (as per Cl.24.104 of IS 302-2-80 :2017))	-	1000	-
9(Supply Connection and External Flexible cords (as per Cl.25 of IS 302-2-80 :2017))	-	1000	-
9(Terminals for External conductors (as per Cl.26 of IS 302-2-80 :2017))	-	1000	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	1000	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	1000	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	1000	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	1000	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	1000	-
9(Screw and connections (as per Cl.28 of IS 302-2-80 :2017))	-	1000	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	800	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	800	-
9(Resistance to fire (Glow wire Test) (as per Cl.30 of IS 302-2-80 :2017))	-	1000	-
9(Resistance to rusting (as per Cl.31 of IS 302-2-80 :2017))	-	1000	-
9(Radiation, Toxicity and similar Hazards (Cl.32 of IS 302-2-80 :2017))	-	1000	-
10.1(Speed Regulators)	-	1000	-
10.2(Speed Regulators)	-	1000	-
10.2(Speed Regulators)	-	1000	-
10.2(Speed Regulators)	-	1000	-
10.3(Speed Regulators)	-	1000	-
10.4(Speed Regulators)	-	1000	-
10.5(Speed Regulators)	-	1000	-
10.6(Speed Regulators)	-	1000	-
10.7(Speed Regulators)	-	1000	-
10.7(Speed Regulators)	-	1000	-
10.8(Speed Regulators)	-	1000	-
11.1(Starting)	-	1000	-
11.2(Starting)	-	1000	-
12(Interchangeability)	-	1000	-
13(Silent Operation)	-	1000	-
14.3 & Table 1(Test for Air Performance)	-	2000	-
14.3 & Table 1(Test for Air Performance)	-	2000	-
14.4(Measurement of Speed of the Fan )	-	1000	-
14.4(Measurement of Speed of the Fan )	-	1000	-
14.5(Measurement of Power factor and Power Input)	-	1000	-
14.5(Measurement of Power factor and Power Input)	-	1000	-
16(Endurance Test)	-	2000	-
16(Endurance Test)	-	2000	-
16(Endurance Test)	-	2000	-
16(Endurance Test)	-	2000	-
16(Endurance Test)	-	2000	-
16(Endurance Test)	-	2000	-
17(Test for Harmonic Distortion)	-	1000	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	500	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	500	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	500	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	500	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	500	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	500	-
7(Classification (as per Cl.6 of IS 302-2-80 :2017))	-	500	-
8.1(Marking (as per Cl. 7 of IS 302-2-80:2017))	-	800	-
8.1,a(Marking )	-	800	-
8.1,b(Marking )	-	800	-
8.1,c(Marking )	-	800	-
8.1,d(Marking )	-	800	-
8.1,e(Marking )	-	800	-
8.1,f(Marking )	-	800	-
8.1,g(Marking )	-	800	-
8.2(Marking )	-	800	-
8.3(Marking )	-	800	-
8.3,a(Marking )	-	800	-
8.3,b(Marking )	-	800	-
8.3,c(Marking )	-	800	-
8.3,d(Marking )	-	800	-
8.3,e(Marking )	-	800	-
8.4(Marking )	-	800	-
8(Marking (as per Cl. 7.1 of IS 302-2-80:2017))	-	800	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1 (f) of IS 302-1:2008))	-	800	-
8(Marking (as per Cl. 7 of IS 302-2-80:2017, Cl.7.1(g) of IS 302-1:2008))	-	800	-
8(Marking (as per Cl.7.12.1(a) of IS 302-2-80:2017))	-	800	-
6.2(Rating)	-	500	-
9(Protection against access to live parts (as per Cl.8 of IS 302-2-80 :2017))	-	1000	-
9(Power Input & current (as per Cl.10 of IS 302-2-80 :2017))	-	1000	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	1000	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	1000	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	1000	-
9( Heating (as per Cl.11 of IS 302-2-80 :2017))	-	1000	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	1500	-
9(Leakage current and Electric strength at operating temperature (as per Cl.13 of IS 302-2-80 :2017))	-	1500	-
9(Transient over Voltage (as per Cl.14 of IS 302-2-80 :2017))	-	1000	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	1500	-
9(Moisture Resistance (After Humidity test) (as per Cl.15 & Cl.16 of IS 302-2-80 :2017) )	-	1500	-
9(Overload protection of transformers and associated circuits (as per Cl.17 of IS 302-2-80 :2017))	-	1000	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	1000	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	1000	-
9( Abnormal Operation (as per Cl.19 of IS 302-2-80 :2017))	-	1000	-
9(Staibilty and mechanical hazards (as per Cl.20.102, Table 101 of IS 302-2-80 :2017))	-	1000	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-1:2008))	-	1000	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017 and Cl.21.1 of IS 302-1:2008))	-	1000	-
9(Mechanical strength (as per Cl.21 of IS 302-2-80 :2017))	-	1000	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	1000	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	1000	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	1000	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	1000	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	1000	-
9(Mechanical strength (as per Cl.21.102 of IS 302-2-80 :2017))	-	1000	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	1000	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	1000	-
9(Internal wiring (as per Cl.23 of IS 302-2-80 :2017 and Cl.23 of IS 302-1:2008))	-	1000	-
9(Components (as per Cl.24.103 of IS 302-2-80 :2017))	-	1000	-
9(Components (as per Cl.24.104 of IS 302-2-80 :2017))	-	1000	-
9(Supply Connection and External Flexible cords (as per Cl.25 of IS 302-2-80 :2017))	-	1000	-
9(Terminals for External conductors (as per Cl.26 of IS 302-2-80 :2017))	-	1000	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	1000	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	1000	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	1000	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	1000	-
9(Provision for earthing (as per Cl.27 of IS 302-2-80 :2017))	-	1000	-
9(Screw and connections (as per Cl.28 of IS 302-2-80 :2017))	-	1000	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	800	-
9(Clearances, creepage distances and solid insulation (as per Cl.29 of IS 302-2-80 :2017))	-	800	-
9(Resistance to fire (Glow wire Test) (as per Cl.30 of IS 302-2-80 :2017))	-	1000	-
9(Resistance to rusting (as per Cl.31 of IS 302-2-80 :2017))	-	1000	-
9(Radiation, Toxicity and similar Hazards (Cl.32 of IS 302-2-80 :2017))	-	1000	-
10.1(Speed Regulators)	-	1000	-
10.2(Speed Regulators)	-	1000	-
10.2(Speed Regulators)	-	1000	-
10.2(Speed Regulators)	-	1000	-
10.3(Speed Regulators)	-	1000	-
10.4(Speed Regulators)	-	1000	-
10.5(Speed Regulators)	-	1000	-
10.6(Speed Regulators)	-	1000	-
10.7(Speed Regulators)	-	1000	-
10.7(Speed Regulators)	-	1000	-
10.8(Speed Regulators)	-	1000	-
11.1(Starting)	-	1000	-
11.2(Starting)	-	1000	-
12(Interchangeability)	-	1000	-
13(Silent Operation)	-	1000	-
14.3 & Table 1(Test for Air Performance)	-	2000	-
14.3 & Table 1(Test for Air Performance)	-	2000	-
14.4(Measurement of Speed of the Fan )	-	1000	-
14.4(Measurement of Speed of the Fan )	-	1000	-
14.5(Measurement of Power factor and Power Input)	-	1500	-
14.5(Measurement of Power factor and Power Input)	-	1000	-
16(Endurance Test)	-	2000	-
16(Endurance Test)	-	2000	-
16(Endurance Test)	-	2000	-
16(Endurance Test)	-	2000	-
16(Endurance Test)	-	2000	-
16(Endurance Test)	-	2000	-
17(Test for Harmonic Distortion)	-	1000	-
4(GENERAL REQUIREMENTS)	-	1000	-
5(GENERAL NOTES ON TESTS)	-	1000	-
15.1, 15.2(Air delivery and service value)	-	2000	-
9(Construction (as per Cl.22.101 of IS 302-2-80 :2017))	-	1000	-
9(Construction (as per Cl.22.101 of IS 302-2-80 :2017))	-	1000	-

28 Aug, 2027

-
Exclusion: Cl.19.11.4.1 to Cl.19.11.4.7 (EMI/EMC Test)

9414

Atmy Analytical Labs Pvt. Ltd., Faridabad

8167506

IS 4026 (2023)

ALUMINIUM INGOTS BILLETS AND WIRE BARS EC GRADE

ALL

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8(SHAPES AND SIZES)	-	6000	-
9, Table 1, i)(Aluminium, Min)	-	6000	-
9, Table 1, ii)(Silicon)	-	6000	-
9, Table 1, iii)(Iron)	-	6000	-
9, Table 1, iv)(Copper)	-	6000	-
9, Table 1, v)(Manganese)	-	6000	-
9, Table 1, vi)(Magnesium)	-	6000	-
9, Table 1, vii)(Chromium)	-	6000	-
9, Table 1, viii)(Zinc)	-	6000	-
9, Table 1, ix)(Titanium)	-	6000	-
9, Table 1, x)(Boron)	-	6000	-
9, Table 1, xi)(Gallium)	-	6000	-
9, Table 1, xii)(Zirconium)	-	6000	-
9, Table 1, xiii)(Titanium + Vanadium)	-	6000	-
9, Table 1, xiv)(Other elements (each))	-	6000	-
9, Table 1, xv)(Other elements (Total))	-	6000	-
8(SHAPES AND SIZES)	-	6000	-
9, Table 1, i)(Aluminium, Min)	-	6000	-
9, Table 1, ii)(Silicon)	-	6000	-
9, Table 1, iii)(Iron)	-	6000	-
9, Table 1, iv)(Copper)	-	6000	-
9, Table 1, v)(Manganese)	-	6000	-
9, Table 1, vi)(Magnesium)	-	6000	-
9, Table 1, vii)(Chromium)	-	6000	-
9, Table 1, viii)(Zinc)	-	6000	-
9, Table 1, ix)(Titanium)	-	6000	-
9, Table 1, x)(Boron)	-	6000	-
9, Table 1, xi)(Gallium)	-	6000	-
9, Table 1, xii)(Zirconium)	-	6000	-
9, Table 1, xiii)(Titanium + Vanadium)	-	6000	-
9, Table 1, xiv)(Other elements (each))	-	6000	-
9, Table 1, xv)(Other elements (Total))	-	6000	-
3.3.1.(Thiram Content - IS 4320:2024)	-	4500	-

25 Feb, 2027

-
-

9415

BIS, Bengaluru Branch Laboratory (BNBL)

None

IS 2347 (2023)

DOMESTIC PRESSURE COOKER ï¿½ SPECIFICATION

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 (Capacity)	-
4.2 (Body Capacity)	-
6 (Construction)	-
6.1 (Pressure Regulating Device)	-
6.1.1 (Pressure Regulating Device)	-
6.1.1 (Minimum Inside diameter of Vent Pipe.)	-
6.1.2 (Pressure Regulating Device)	-
6.1.3 (Pressure Regulating Device)	-
6.1.4 (Pressure Regulating Device)	-
6.1.5 (Pressure Regulating Device)	-
6.1.6 (Pressure Regulating Device)	-
6.2 (Safety Relief Device)	-
6.2.1 (Safety Relief Device)	-
6.2.2 (Safety Relief Device)	-
6.2.3 (Safety Relief Device)	-
6.3.1 (Temperature Responsive Safety Relief Device)	-
6.3.2 (Temperature Responsive Safety Relief Device)	-
6.4.1.1 (Handles and Knobs)	-
6.4.2 (Handles and Knobs)	-
6.7 (Internal Level Marking)	-
6.8 (Internal Level Marking)	-
7.1 (WORKMANSHIP AND FINISH)	-
7.2 (WORKMANSHIP AND FINISH)	-
7.3 (WORKMANSHIP AND FINISH)	-
7.4 (WORKMANSHIP AND FINISH)	-
8.1 (Air Pressure Test)	-
8.2 (Proof Pressure Test)	-
8.3.1 (Operating Test for Pressure Regulating Device)	-
8.4.1 (Test for Safety Relief Device)	-
8.4.2 (Test for Safety Relief Device)	-
8.4.2 NOTE (Test for Safety Relief Device)	-
8.5 (Bursting Pressure Test)	-
8.6.1 (Tests for Removal of Lid under Pressure For Outer Lid Cooker)	-
8.6.2 (Tests for Removal of Lid under Pressure For inner Lid Cooker)	-
8.6.3 (Tests for Removal of Lid under Pressure: For Cooker Fastened by Screw Clamps or Any Other Locking Device)	-
8.7 (Test for Spring Loaded Mechanism)	-
8.8 (Test for stainless steel cookers)	-
8.9 ("For stainless steel, aluminium induction compatible base and 3 ply cooker")	-
8.10 (Testing of Handles of the cooker)	-
8.10 Note 3 (Testing of Handles of the cooker)	-
8.10 Note 4 (Testing of Handles of the cooker)	-
8.10 Note 5 (Testing of Handles of the cooker)	-
8.10 Note 6 (Testing of Handles of the cooker)	-
8.11.1 (External Coating)	-
8.12 (Internal Coating)	-
8.14 (Ply construction cooker Body )	-
8.15.1 (Fragmentation Test on Tempered Glass lid)	-
8.15.2 (Ball Drop Test on Tempered Glass lid)	-
8.15.3 (Thermal Shock Test on Tempered Glass lid)	-
8.15.4.1 ("Free Fall Test ( Glass lid with rim) ")	-
8.15.4.2 (Glass lid without rim)	-
8.16 (PRD with chain)	-
8.17 (Test for Effectiveness for Induction Bottom)	-
8.3.1 (Operating Test for Pressure Regulating Device)	-
8.4.1 (Test for Safety Relief Device)	-

-
Except Material Testing

9416

BIS, Bengaluru Branch Laboratory (BNBL)

None

IS 333 (2023)

POTASSIUM PERMANGANATE SPECIFICATION

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-4.1 (Description)	-
Cl-4.2,Table-1,sl.no-i (Potassium permanganate (as KMnO4) content,)	-
Cl-4.2,Table-1,sl.no-ii (Insoluble matter)	-
Cl-4.2,Table-1,sl.no-iii ( Chlorides (as Cl))	-
Cl-4.2,Table-1,sl.no-iv (Sulphate (as SO4))	-
Cl-4.2,Table-1,sl.no-v (Nitrogen compounds (as N))	-
Cl-4.2,Table-1,sl.no-vi (Arsenic (as As2O3),)	-
Cl-4.2,Table-1,sl.no-vii (Loss on heating at 110 °C)	-

-
-

9417

BIS, Bengaluru Branch Laboratory (BNBL)

None

IS 14781 (2000)

Sodium thiosulphate - Specification

Rs. 6960 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Description)	-
4.3, Table No - 1 , 1), i) (Sodium thiosulphate (as Na2S203.5H20). percent by mass)	-
4.3, Table No - 1 , 1), ii) (pH of 10 percent solution)	-
4.3, Table No - 1 , 1), iii) (Insoluble matter and metals other than alkali metals, percent by mass, Max)	-
4.3, Table No - 1 , 1), iv) (Sodium sulphide (as Na.$G), percent by mass, Max)	-
4.3, Table No - 1 , 1), v) (Heavy metals (as Pb), percent by mass, Max)	-
4.3, Table No - 1 , 1), vi) (Iron (as Fe), percent by mass, Max)	-
4.3, Table No - 1 , 1), vii) (Calcium (as Ca). percent by mass, Max)	-
4.3, Table No - 1 , 1), viii) (Sulphate and sulphite (as SO4), percent by mass, Max)	-
4.3, Table No - 1 , 1), ix) (Arsenic (as As2O3), percent by mass, Max)	-
4.2 (Solution in Water)	-

-
-

9418

BIS, Bengaluru Branch Laboratory (BNBL)

None

IS 4408 (1979)

Specification for sodium chloride, analytical reagent (First Revision)

Please see remarks. View breakup
Cost of total manhours Rs.6150 Total electricity consumption: Rs. 126 Total cost of consumables: Rs. 1000 Charges for preparation of test report Rs. 450 Testing charges for the product: Rs. 7726 Total time for the purpose of time norms 27.5

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2.1 (Description)	-
2.2, Table 1,(i) (Sodium chloride, percent by mass, Min)	-
2.2, Table 1,(ii) (Sulphate ( as SO4 ), percent by mass, Max)	-
2.2, Table 1,(iii) (Nitrate ( as NO3 ), percent by mass, Max)	-
2.2, Table 1,(iv) (Phosphates ( as PO4 ), percent by mass, Max)	-
2.2, Table 1,(v) (Iron ( as Fe ), percent by mass, Max)	-
2.2, Table 1,(vi) (Heavy metals (as Pb), percent by mass, Max)	-
2.2, Table 1,(vii) (Barium (as Ba), percent by mass, Max)	-
2.2, Table 1,(viii) (Calcium and magnesium together ( as Ca ), percent by mass, Max)	-
2.2, Table 1,(ix) (Potassium (as K), percent by mass, Max)	-
2.2, Table 1,(x) (Ammonium salts ( as NH4 ), percent by mass, Max)	-
2.2, Table 1,(xi) (Arsenic (as As), percent by mass, Max)	-
2.2, Table 1,(xii) (pH of 10 percent solution)	-
2.2, Table 1,(xiii) (Bromide and iodide ( as Br ), percent by mass, Max)	-
2.2, Table 1,(xiv) (Insoluble matter, percent by mass, Max)	-
2.2, Table 1,(xv) (Ferrocyanide [ at Fe ( CN )6 ] percent by mass, Max)	-

-
-

9419

BIS, Bengaluru Branch Laboratory (BNBL)

None

IS 2052 (2023)

Compounded feeds for cattle ï¿½ Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl no.4.1 (General)	-
Cl no.4.3,7.1, Table no. 1(i) (Moisture)	-
Cl no.4.3,7.1, Table no. 1(ii) (Crude protein (N × 6.25))	-
Cl no.4.3, 7.1,Table no. 1(iii) (Crude fat)	-
Cl no.4.3 ,7.1, Table no. 1(iv) (Crude fibre)	-
Cl no.4.3 ,7.1, Table no. 1(v) (Acid insoluble ash)	-
Cl no.4.3,7.1Table no. 1(vi) ("Salt (as NaCl based on Na or Cl), percent by mass")	-
Cl no.4.3 7.1,Table no. 1(vii) (Calcium (as Ca))	-
Cl no.4.3,7.1,Table no. 1(viii) (Total phosphorus)	-
Cl no.4.3 ,7.1, Table no. 1(xv) (Cadmium)	-

-
Exclusion Except Available phosphorus,Urea,Vitamin A,Vitamin D3,Vitamin E and Aflatoxin B1

9420

Interstellar Testing Centre Pvt. Ltd. (A group company of Qualitek Labs Limited), Panchkula

9108716

IS 14887 (2014)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg food grains – Specification (first revision)

16600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2 and Table 1 ii(Dimensions )	-	400	GST extra as applicable
5.2 and Table 1 iii(Ends per dm )	-	300	GST extra as applicable
5.2 and Table 1 iv(Picks per dm )	-	300	GST extra as applicable
4.2 and Table 1 v(Mass of sack )	-	1200	GST extra as applicable
4.2 and Table 1 vi(Average breaking strength of fabric )	-	1500	GST extra as applicable
4.2 and Table 1 vi(Breaking strength of bottom seam )	-	1500	GST extra as applicable
4.2 and Table 1 viii(Elongation at break of fabric )	-	1500	GST extra as applicable
4.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	9100	GST extra as applicable
4.2 and Table 1 x(Ash content )	-	800	GST extra as applicable

31 Jul, 2028

-
-

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number