BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

11942 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

9421

MATERIAL TESTING LABORATORY LLP

8176306

IS 432 : Part 1 (1982)

Mild Steel and Medium Tensile Steel Bars and Hard-Drawn Steel Wire for Concrete Reinforcement: Part 1 Mild Steel and Medium Tensile Steel Bars

All Grades

3150 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause -4, 4.1( CARBON)	-	200	-
Clause -4, 4.1(SULPHUR)	-	200	-
Clause -4, 4.1(PHOSPHURS)	-	200	-
Clause -4, 4.1(MANGANESE)	-	200	-
Clause -4, 4.1(SILICON)	-	200	-
Clause -4, 4.1(NITROGEN)	-	200	-
Clause -4, 4.2(VANADIUM)	-	200	-
Clause -4, 4.1(NIOBIUM)	-	200	-
Clause -4, 4.1(Chromium)	-	200	-
Clause -4, 4.1(Nickel)	-	200	-
Clause -4, 4.1(Molybdenum)	-	200	-
Cl 8.1(ultimate tensile stress, yield stress and percentage elongation)	-	500	-
Clause 8.1(Elongation)	-	500	-
Clause 8.1(Yield Stress)	-	0	-
Cl 8.2(Bend test)	-	250	-
Clause -4, 4.3(TITANIUM)	-	200	-
Clause 6.1(Size)	-	100	-
Cl 6.2(Diameter & Ovality)	-	100	-
Cl 6.2(Weight)	-	100	-
Clause 5.1(Freedom from Defect)	-	100	-
11(Marking)	-	100	-

18 Feb, 2027

-
Scope Restricted to Bars of Diameter upto 25 mm

9422

MATERIAL TESTING LABORATORY LLP

8176306

IS 410 (1977)

Specification for cold rolled brass sheet, strip and foil (Third Revision)

All Grades

2250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1 Table-1(Zn)	-	200	-
6.1 Table-1(Cu)	-	200	-
6.1 Table-1(Pb)	-	200	-
6.1 Table-1(Fe)	-	200	-
7.1.1(Tensile Test)	-	500	-
Table-2(Elongation)	-	500	-
Table-2(Vickers Hardness)	-	100	-
Table-2(Transverse Bend)	-	100	-
Table-2(Longitudinal Bend)	-	100	-
Table-2(Thickness)	-	100	-
4.0(Freedom from defects)	-	100	-
6.1 Table-1(Total impurities including iron)	-	200	-
7.1.1(Erichsen cupping values -IS 410)	-	150	-
7.1.5(Grain Size - IS 410)	-	100	-
8(Dimensions -IS 410)	-	100	-
11(Marking)	-	100	-

18 Feb, 2027

-
Scope Restricted to Sheets, Strips and Foils of thickness greater than or equal to 0.5 mm

9423

MATERIAL TESTING LABORATORY LLP

8176306

IS 319 (2007)

Free cutting brass bars, rods and section - Specification (Fifth Revision)

All Grades

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1 Table 1(Zn)	-	500	-
8.1 Table 1(Cu)	-	500	-
8.1 Table 1(Pb)	-	500	-
8.1 Table 1(Fe)	-	500	-
10.1(Mercurous Nitrate Test)	-	1500	-
7.0(Dimension and Tolerances)	-	500	-
9.1 Table-2(Tensile Strength)	-	1000	-
9.1 Table-2(Elongation)	-	500	-
9.2(Vickers Hardness)	-	500	-
5.0(Freedom from defects)	-	250	-
8.1 Table 1(Total other impurities excluding iron)	-	500	Other impurities do no preclude presence of other unnamed elements(Ni or Ag).
14(Marking)	-	250	-

18 Feb, 2027

-
Scope Restricted to Bars, Rods and Sections of diameter/size upto 25 mm

9424

MATERIAL TESTING LABORATORY LLP

8176306

IS 10748 (2004)

Hot - Rolled steel strip for welded tubes and pipes - Specification (Second Revision)

All grades

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1(Carbon %)	-	250	-
7.1(Sulphur %)	-	250	-
7.1(Phosphorus %)	-	250	-
7.1(Manganese %)	-	250	-
7.1(Silicon %)	-	250	-
Table 1 ( Clauses 7.1 ,7.2 )(Chromium)	-	250	-
7.1(Ni)	-	250	-
7.1(Mo)	-	250	-
7.1( Copper %)	-	250	-
7.1( Nitrogen%)	-	500	-
7.1(V)	-	500	-
7.1( Ti)	-	500	-
7.1( Nb)	-	500	-
Cl. 8, Table 3(Elongation)	-	500	-
Cl 8 & Table 3(UTM)	-	500	-
Cl. 8, Table 3(Yield Stress)	-	500	-
Cl 9(Press)	-	500	-
Cl 12 & 13(Length, Width & Thickness)	-	500	-
Cl. 12, 13(Camber)	-	250	-
Cl 11(Workmanship)	-	250	-
Cl. 14(Weight)	-	250	-
15(Condition of Coil)	-	250	-
16(Marking)	-	250	-
15.0 & 15.1(Coil edges - IS:10748)	-	250	-
15.0 & 15.2(Surface finish - IS:10748)	-	250	-
15.0 & 15.5(Telescopicity - IS:10748)	-	250	-

18 Feb, 2027

-
Scope restricted to all other than Sheets and Strips of thickness more than 10 mm.

9425

MATERIAL TESTING LABORATORY LLP

8176306

IS 1161 (2014)

Steel tubes for structural purposes - Specification (Fifth Revision)

All Grades

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause - 5.1, Table-3( CARBON)	-	250	-
Clause - 5.1, Table-3(SULPHUR)	-	250	-
Clause - 5.1, Table-3(PHOSPHURS)	-	250	-
Clause - 5.1, Table-3(MANGANESE)	-	250	-
Clause - 5.1, Table-3(SILICON)	-	250	-
Cl 7(Workmanship)	-	0	-
Clause - 5.1, Table-3(NITROGEN)	-	500	-
Cl 7(Workmanship)	-	0	-
Cl 6(Outer Diameter, Thickness & Mass)	-	1000	-
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	0	-
5 AND AS PER IS 10748(MICRO ALLOY)	-	2000	-
Cl 11.3.1(Flattening test (over 50 mm NB))	-	500	-
8 AND AS PER IS 4736(MASS OF ZINC COATING)	-	500	-
Clause 11.2, Table -2(Elongation)	-	500	-
Cl 11(Tensile Test, Flattening Test & Cold Bend Test)	-	500	-
Cl 11.3.1(Cold bend test (upto & including 50 mm NB))	-	500	-
8 AND AS PER IS 4736(UNIFORMITY OF ZINC COATING)	-	500	-
Clause 11.2, Table -2(Yield Strength)	-	500	-
Clause - 5.1, Table-3( ALUMINIUM)	-	500	-
Cl. 6 , 6.2 Table 1(Weight)	-	250	-
9(Straightness)	-	250	-
10(Lengths)	-	250	-
Cl 7(Workmanship)	-	0	-
13.0(Oiling and Painting - Visual)	-	250	-
12(Marking)	-	250	-
8.0(Adhesion test-Pivoted Hammer Test - IS 4736)	-	500	-

18 Feb, 2027

-
Scope restricted to all other than Tubes of wall thickness greater than 10 mm and Galvanized Tubes

9426

MATERIAL TESTING LABORATORY LLP

8176306

IS 2062 (2011)

Hot rolled medium and high tensile structural steel - Specification (Seventh Revision)

All Grades

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause - 5, 8.1 & 8.2(E550, CARBON)	-	250	-
Clause - 5, 8.1 & 8.2(E650, SULPHUR)	-	250	-
Clause - 5, 8.1 & 8.2(E550, PHOSPHURS)	-	250	-
Clause - 5, 8.1 & 8.2(E650 ,MANGANESE)	-	250	-
Clause - 5, 8.1 & 8.2(E600, SILICON)	-	250	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	250	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	250	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	250	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	250	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	250	-
Clause - 5, 8.1 & 8.2(E600, NITROGEN)	-	500	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl 10.3(UTM)	-	500	-
Cl. 10.3 (Cl. 10.3 (Elongation %))	-	500	-
Cl. 10.3 (Cl. 10.3 (Yield Stress))	-	500	-
Cl 12(Sudden Load Applied)	-	500	-
Clause 11.3(IS 1599)	-	500	-
Clause 12(IS 1757)	-	500	-
Clause - 5, 8.1 & 8.2(E650, CARBON +EQUIVELENT )	-	250	-
20(MARKING)	-	250	-
16(Tolerance)	-	250	-
Clause 15, Table 4(IS 2062)	-	500	-
Cl 13(Y Groove Cracking Test)	-	0	-
14.1(Soundness test)	-	0	-
14.2(Grain Size)	-	0	-
Clause 7(IS 2062)	-	250	-
9(Preparation of test sample)	-	500	-

18 Feb, 2027

-
Exclusion: Cl. 13 (Y Groove Cracking Test), Cl.4.1 (Soundness test), Cl.14.2 (Inclusion) Scope restricted to all other than Plates, Sheets and Strips of thickness greater than 10 mm, Round/Square Bars of Diameter/ Nominal Size greater than 25 mm, All other sections as covered under Table 4 of IS 2062 i.e. Beams, Channels, Angels, Sheet piles , columns, tee bars, Bulb Flats, Track Shoe Section.

9427

MATERIAL TESTING LABORATORY LLP

8176306

IS 2831 (2012)

Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into structural steel (Ordinary Quality) - Specification (Fourth Revision)

All Grades

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 6.1, Table 1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	250	-
Cl. 6.1, Table 1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	250	-
Cl. 6.1, Table 1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	250	-
Cl. 6.1, Table 1(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	250	-
Cl. 6.1, Table 1(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	250	-
Table 1 Note 2(Any Instrumental Method/Chemical Method)	-	250	-
Table 1 Note 2(Any Instrumental Method/Chemical Method)	-	250	-
Cl. 6.1, Table 1(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	250	-
Cl. 6.1, Table 1(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 6.1, Table 1(Aluminium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 6.1, Table 1(Titanium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 6.1, Table 1(Niobium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl. 6.1, Table 1(Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
10.1.a)( Macro examination IS 11371)	-	2000	-
10.1.b)( Sulphur print tests IS 12037)	-	2000	-
11(Dimensions)	-	250	-
10.2(Bend)	-	500	-
10.3(Chamber)	-	500	-
11 & 12(DIMENSIONS and Tolerances)	-	0	-
9( FREEDOM FROM DEFECTS)	-	250	-
13(Marking)	-	125	-
8(Selection of Test sample)	-	125	-

18 Feb, 2027

-
-

9428

MATERIAL TESTING LABORATORY LLP

8176306

IS 2830 (2012)

Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into steel for general structural purposes - Specification (Third Revision)

All grades

10995 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 11(Length, Width & Thickness)	-	500	-
6.1(Carbon %)	-	250	-
6.1(Manganese %)	-	250	-
6.1(Silicon %)	-	250	-
6.1(Sulphur %)	-	250	-
6.1(Phosphorus %)	-	250	-
6.1(Ni)	-	250	-
6.1(Cr)	-	250	-
6.1(Mo)	-	250	-
6.1( Copper %)	-	250	-
6.1(V)	-	500	-
6.1( Ti)	-	500	-
Cl. 10.1 (b)(Sulphur Print)	-	3000	-
6.1( Aluminium %)	-	250	-
6.1( Nitrogen%)	-	250	-
6.1( Nb)	-	500	-
Cl. 10.1 (a)(Macro Examination)	-	3000	-
Clause 6, Table 1 Note : 1(By Calculation)	-	250	-
Clause 10.3(Camber)	-	500	-
Cl. 10.2(Bend)	-	500	-
Cl 9(Workmanship)	-	0	-
Cl 11(Length, Width & Thickness)	-	0	-
8(Selection of Test samples)	-	250	-
12(Tolerance - IS 2830)	-	0	-
13(Marking)	-	250	-

18 Feb, 2027

-
-

9429

BIS, Central Laboratory (CL)

None

IS 15603 (2005)

Alphacypermethrin, WP - Specification

Rs.7580/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2.1 (Description)	-
3.2.2 (Sieving Requirements)	-
3.2.3 (Suspensibility Test)	-
3.2.4 (Wettability)	-
3.3.2 (Acidity or Alkalinity)	-

-
Excluding Cl 3.3.1 Content

9430

BIS, Central Laboratory (CL)

None

IS 1165 (2002)

Milk Powder (Bi-lingual)

Rs 10430/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.5 (Bacterial count)	-
3.4.5 (Fat)	-
3.4.5 (Insolubility index)	-
3.4.5 (Total ash)	-
3.1 (Description)	-
3.2 (Flavour and taste)	-
3.4.5 (Titratable acidity (lactic acid))	-
3.5.2 (Coliform count)	-
3.5.3 (Staphylococcus Aureus)	-
3.5.4 (Salmonella)	-
3.5.5 (Shigella)	-

-
500 gm x 3

9431

BIS, Eastern Regional Laboratory (ERL)

None

IS 3818 (1992)

Continuous (Piano) hinges -Specification

Rs 1500/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4-Fig 1 (DIMENSIONS AND TOLERANCES-Nominal Size)	-
4-Fig 1 (DIMENSIONS AND TOLERANCES-B)	-
4-Fig 1 (DIMENSIONS AND TOLERANCES-C)	-
4-Fig 1 (DIMENSIONS AND TOLERANCES-D)	-
4-Fig 1 (DIMENSIONS AND TOLERANCES-T)	-
4-Fig 1 (DIMENSIONS AND TOLERANCES-CSK Screw No.)	-
4-Fig 1 (DIMENSIONS AND TOLERANCES-minimum distance of screw holes from the end of flap)	-
4-Fig 3 (DIMENSIONS AND TOLERANCES-B)	-
4-Fig 3 (DIMENSIONS AND TOLERANCES-B1)	-
4-Fig 3 (DIMENSIONS AND TOLERANCES-B2)	-
4-Fig 3 (DIMENSIONS AND TOLERANCES-C)	-
4-Fig 3 (DIMENSIONS AND TOLERANCES-D)	-
4-Fig 3 (DIMENSIONS AND TOLERANCES-T)	-
4-Fig 3 (DIMENSIONS AND TOLERANCES-CSK Screw No.)	-

-
Excluding Al, & micro alloy (B, Nb,V, Ti)

9432

Central Power Research Institute (CPRI), Bangalore

6101024

IS 14286 : Part 1 (2019)

Terrestrial photovoltaic (PV) modules - Design qualification and type approval: Part 1 test requirements (Second Revision)

SOLAR PHOTOVOLTAIC MODULE

1175000 View breakup
-

Clause No.	Exclusion	Remark
5(Marking and documentation)	-	The complete test charges will be provided through a proforma invoice.
6(Testing)	-	The complete test charges will be provided through a proforma invoice.
7(Pass criteria)	-	The complete test charges will be provided through a proforma invoice.
8(Major visual defects)	-	The complete test charges will be provided through a proforma invoice.
8(Major visual defects)	-	The complete test charges will be provided through a proforma invoice.
9(Report)	-	The complete test charges will be provided through a proforma invoice.
10(Modifications)	-	The complete test charges will be provided through a proforma invoice.
11(Test flow and procedures)	-	The complete test charges will be provided through a proforma invoice.

31 Dec, 2026

-
Included w.e.f, 23/04/2020

9433

AGSS ANALYTICAL AND RESEARCH LAB PVT LTD

8166916

IS 1165 (2002)

Milk Powder (Bi-lingual)

6500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.5(Bacterial count)	-	600	-
3.5.2(Coliform count)	-	600	-
3.5.3(Staphylococcus Aureus)	-	700	-
3.5.4(Salmonella)	-	700	-
3.5.5(Shigella)	-	700	-
3.4.5(Moisture)	-	500	-
3.4.5(Total solids)	-	500	-
3.4.5(Fat)	-	550	-
3.4.5(Insolubility index)	-	550	-
3.4.5(Total ash)	-	350	-
3.1(Description)	-	100	-
3.2(Flavour and taste)	-	150	-
3.4.5(Titratable acidity (lactic acid))	-	500	-

13 Jan, 2027

-
-

9434

Central Power Research Institute (CPRI), Bangalore

6101024

IS 16106 (2012)

Method of electrical and photometric measurements of solid state lighting (Led) products

SSL Product

32000 View breakup
-

Clause No.	Exclusion	Remark
5(Power supply characteristics)	-	The complete test charges will be intimated through proforma invoice
6(Seasoning (Ageing) of SSL products)	-	The complete test charges will be intimated through proforma invoice
7(Stabilization of SSL products)	-	The complete test charges will be intimated through proforma invoice
8(Operating orientation)	-	The complete test charges will be intimated through proforma invoice
9(Electrical settings)	-	The complete test charges will be intimated through proforma invoice
10(Electrical instrumentation)	-	The complete test charges will be intimated through proforma invoice
11(Test methods for total luminous flux measurement)	-	The complete test charges will be intimated through proforma invoice
12(Luminous intensity distribution)	-	The complete test charges will be intimated through proforma invoice
13(Luminous efficacy)	-	The complete test charges will be intimated through proforma invoice
14(Test methods for colour characteristics of SSL products)	-	The complete test charges will be intimated through proforma invoice
15(Uncertainty statement)	-	The complete test charges will be intimated through proforma invoice

31 Dec, 2026

-
-

9435

MATERIAL TESTING LABORATORY LLP

8176306

IS 1786 (2008)

High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision)

All grades (Upto-25 mm)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 7.2(Weight)	-	250	-
4.1(Carbon %)	-	250	-
4.1(Sulphur %)	-	250	-
4.1(Phosphorus %)	-	250	-
4.1(Manganese %)	-	250	-
4.1( Aluminium %)	-	250	-
4.1(V)	-	250	-
4.1(Cr)	-	250	-
4.1(Ni)	-	250	-
4.1(Mo)	-	250	-
4.1( Copper %)	-	250	-
4.1( Nitrogen%)	-	250	-
4.1( Ti)	-	250	-
4.1( Nb)	-	250	-
4.2(Boron (B))	-	250	-
Cl 8.1(UTM)	-	500	-
Cl. 9.3, Table 4(Bend Test )	-	250	-
Cl.9.4 & Cl. 9.4.1(Rebend test)	-	250	-
Cl. 8.1 Table 3(Elongation, percentage)	-	500	-
Cl. 8.1 Table 3(TS/YS ratio)	-	250	-
Cl. 5.2(Surface Characteristics)	-	0	Cl. 5.1 High strength deformed bars/wires shall satisfy the requirements given in either 5.2 or 5.7 for routine testing.
5.7(PullOut (Bond Test))	-	5500	Cl. 5.1 High strength deformed bars/wires shall satisfy the requirements given in either 5.2 or 5.7 for routine testing.
Cl. 6.1(Nominal Size)	-	250	-
Cl. 8.1 Table 3(Yield Stress (YS))	-	500	-
Cl 5(Deformations and Surface Characteristics)	-	500	-
4.1(Silicon %)	-	250	-
Cl. 8.1 Table 3(Total Elongation at Maximum Force)	-	500	-
Cl. 5 (Cl. 5 - Mean projected area of transverse ribs (1/3 of Ar))	-	500	-
13(Identification and marking)	-	250	-
Cl. 7.2 Table -2 (Nominal Mass)	-	250	-
7.1(Specified length)	-	250	-
9.2(Tensile test,IS:1608(Pt1)-2018)	-	500	-
9.1(Preparation of test sample)	-	500	-
9.5(Retest)	-	0	-
12(Inspection)	-	0	-
4.3(Rolling and cold working of bars/wire)	-	250	-

18 Feb, 2027

-
Exclusion: Cl. 5.7 (Pull Out Test) Scope restricted to all other than Bars of Diameter greater than 25 mm.

9436

BIS, Central Laboratory (CL)

None

IS 427 (2013)

Distemper, dry, colour as required - Specification (Third Revision)

- View breakup
For Initial Testing = Rs. (2625+720+325) = Rs. 3,670 Only Keeping Properties Testing = Rs. (2550+720+300) = Rs. 3,570 For Initial Testing With ECO-Mark Requirements = Rs. (5025+747+575) = Rs. 6,347 = Rs. 6,350 (Excluding Keeping Properties) Preparation of Test Report = Rs. 300.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Form and Condition)	-
4.2.1 (Composition)	-
4.3.1 (Lead restriction)	-
4.2.2 & 7, Table-1(i) (Drying time)	-
4.2.2 & 7, Table-1(ii) (Consistency)	-
4.2.2 & 7, Table-1(iii) (Finish)	-
4.2.2 & 7, Table-1(iv) (Colour)	-
4.2.2 & 7, Table-1(vi) (Residue on seive)	-
4.2.2 & 7, Table-1(vii) (Recoating properties)	-
4.2.2 & 7, Table-1(viii) (Resistance to alkali)	-
4.2.2 & 7, Table-1(ix) (Resistance to dry rubbing)	-

-
Weather-o-meter is required Excluding Fastness to light

9437

BIS, Central Laboratory (CL)

None

IS 15489 (2013)

Paint, plastic emulsion - Specification (First Revision)

- View breakup
For Initial Testing = Rs. (4425+3085+550) = Rs. 8,060 For Keeping Properties Only = Rs. (4425+3085+550) = Rs. 8,060 Preparation of Test Report = Rs. 300.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1 (Composition)	-
6.2 (Conditions in the Container)	-
6.3 (Thinning)	-
6.4 (Application Properties)	-
6.5 (Mass in kg/10 litre)	-
6.6 (Opacity)	-
Table 1, 6.10, 6.11 and 9.1 (Consistency)	-
Table 1, 6.10, 6.11 and 9.2 (Drying time,(a) Surface Dry, class A and B)	-
Table 1, 6.10, 6.11 and 9.3 (Drying time,(a) Surface Dry, ass C and D)	-
Table 1, 6.10, 6.11 and 9.4 (Drying time, Hard Dry, class A and B)	-
Table 1, 6.10, 6.11 and 9.5 (Drying time, Hard Dry, ass C and D)	-
Table 1, 6.10, 6.11 and 9.6 (Finish)	-
Table 1, 6.10, 6.11 and 9.7 (Gloss at 60°, class A)	-
Table 1, 6.10, 6.11 and 9.8 (Gloss at 60°, class B)	-
Table 1, 6.10, 6.11 and 9.9 (Gloss at 60°, class C)	-
Table 1, 6.10, 6.11 and 9.10 (Gloss at 60°, class D)	-
Table 1, 6.10, 6.11 and 9.11 (Colour)	-
Table 1, 6.10, 6.11 and 9.12 (Resistance to alkali)	-
Table 1, 6.10, 6.11 and 9.13 (Washability and eanability)	-
Table 1, 6.10, 6.11 and 9.14 (Accelerated storage stability)	-
Table 1, 6.10, 6.11 and 9.15 (Recoating properties)	-

-
Test facility is not available for mentioned exclusion parameters. Weather-o-meter is required. Excluding Fastness to light, Durability, Washability and cleanability.

9438

BIS, Central Laboratory (CL)

None

IS 3450 (1994)

Carbon papers - Handwriting - Specification (Second Revision)

- View breakup
Rs. 3172/- (only for description, substance & coating and keeping quality).

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 (Description)	-
5.3 (Size)	-
5.4 (Carbon work)	-
5.3 (Resistance to curling)	-
Table- 1(i) (Substance of the)	-
Table- 1(ii) (Coating)	-
6 (Keeping quality)	-
Table- 1(i) (Substance of the)	-

-
Excluding Base paper, Durability, Manifolding

9439

BIS, Central Laboratory (CL)

None

IS 2339 (2013)

Aluminium paints for general purposes - Specification (First Revision)

- View breakup
Rs. 5195/- + testing charges as per referred ISS.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 (Composition)	-
5.2 (Lead Restriction)	-
5.3/8.1 (i) (Drying time)	-
5.3/8.1 (iv) (Mass)	-
5.3/8.1 (v) (Wet opacity)	-
5.3/8.1 (vi) (Flexibility and adhesion, bend test)	-
5.3/8.1 (vii) (Resistance to humidity under condition of condensation)	-
5.3/8.1 (viii) (Flash point)	-
5.3/8.1 (ix) (Keeping properties)	-
5.1 (Composition)	-
5.2 (Lead Restriction)	-
5.3, 8.1, Table 1 (Drying time)	-
5.3, 8.1, Table 1 (Consistency)	-
5.3 and 8.1, Table 1, (Finish)	-
5.3 and 8.1, Table 1 (Mass)	-
5.3, 8.1, Table 1 ("Wet opacity,)	-
5.3 and 8.1, Table 1 (Flexibility and adhesion, bend test using Type 1 apparatus and 6.25 mm dia Mandrel)	-
5.3, 8.1, Table 1 (Resistance to humidity under condition of condensation)	-
5.3, 8.1, Table 1 (Flash point)	-
5.3, 8.1, Table 1 (Keeping properties)	-

-
Approved sample is required. Excluding Finish

9440

BIS, Central Laboratory (CL)

None

IS 2933 : Part 1 (2013)

Enamel, exterior: (A) undercoating (B) finishing - Specification: Part 1 for domestic and decorative applications (Second Revision)

- View breakup
Initial Testing charges- For Undercoat = Rs. (4575+1017+450) = Rs. 6,042 = Rs. 6,050. For Finishing = Rs. (5100+1017+550) = Rs. 6,667 = Rs. 6,670. Testing Charges for Keeping Properties Only = Rs. 375 (For both, Undercoat & Finishing) Test Report Preparation Charges = Rs. 300.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Table 2.1.(ii) (b)Viscosity by ford cup No-4)	-
Table 2..(ii) (Mass in Kg/10L,Min.)	-
6.4 (Lead Restriction)	-
Table 2 (iii) Drying time max. (a) Surface dry)	-
Table 2 (iii) Drying time max. (b) Hard dry)	-
Table 2 (iii) Drying time max. (c) Tack free)	-
Table 2 (iv) (Wet opacity Min,m²/10L)	-
6.1.5 (Phthalic anhydride)	-
Table 2 (v) (Finish)	-
Table 2 (vi) (Fineness of grind,microns,Max.)	-
Table 2 (vii) (Colour)	-
Table 2 (vii) (Colour)	-
Table 2 (ix) Flexibility and adhesion (a) Scratch hardness)	-
Table 2 (ix) Flexibility and adhesion (b) Bend Test,(with 6.25mm)	-
Table 2 (xi) (Flash point)	-
Table 2 (xii) (Keeping properties)	-
Table 2..(ii) (Mass in Kg/10L,Min.)	-

-
-

9441

BIS, Central Laboratory (CL)

None

IS 265 (2021)

HYDROCHLORIC ACID SPECIFICATION Fifth Revision

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 4.1 (Description)	-
Cl 4.2, Table 1, (ii) (Residue on ignition, percent by mass, Max)	-
Cl 4.2, Table 1, (iii) (Sulphates (as H2 SO4 ), percent by mass, Max)	-
Cl 4.2, Table 1, (iV) (Iron (as Fe) percent by mass, Max)	-
Cl 4.2, Table 1, (Vi) (Sulphites (as SO2 ), percent by mass, Max)	-
Cl 4.2, Table 1, (Vii) (Heavy metals (as Pb) percent by mass, Max)	-
Cl 4.2, Table 1, (Viii) (Arsenic (as As), percent by mass, Max)	-
Cl 4.2, Table 1, (ix) (Ammonium compounds (as NH4), percent by mass, Max)	-

-
Excluding Clause 4.2 Table1 (i) Total Acidity, (iv) Iron, (x) mercury (xi) organic carbon

9442

BIS, Central Laboratory (CL)

None

IS 13209 (1991)

Indelible ink - Specification

Rs.2400.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (General)	-
3.2 (Description)	-
3.3 (Colour)	-
3.4 (Acidity)	-
3.5 (Total Solids)	-
3.6 (Development)	-
3.7, 3.7.1 (Bleaching)	-
3.7.2 (Resistance to Organic Solvents)	-
3.8 (Keeping Quality)	-
3.8 (Keeping Quality)	-

-
-

9443

BIS, Central Laboratory (CL)

None

IS 15573 (2018)

Polyaluminium chloride (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1.1 (Description -)	-
5.1.1, 5.1.2, 5.2, Table-1(i) (Aluminium as Al2O3,)	-
5.1.1, 5.1.2, 5.2, Table-1(ii) (Basicity)	-
5.1.1, 5.1.2, 5.2, Table-1(iii) (Chloride (as Cl))	-
5.1.1, 5.1.2, 5.2, Table-1(iv) (Sulphates(as SO4))	-
5.1.1, 5.1.2, 5.2, Table-1(x) (Insoluble)	-
5.1.1, 5.1.2, 5.2, Table-1(xi) (Ph of 5% of solution)	-
5.1.1,5.1.2,5.2, Table-1, Toxic substances (Mercury(as Hg))	-
5.1.1, 5.1.2 ,5.2, Table-1, Toxic substances (Arsenic(as As))	-
5.1.1, 5.1.2, 5.2, Table-1, Toxic substances (Cadmium(as Cd))	-
5.1.1, 5.1.2, 5.2, Table-1, Toxic substances (Lead(as Pb))	-
5.1.1.5.1.2,5.2, Table-1, Toxic substances (Iron(as Fe))	-
5.1.1, 5.1.2, 5.2, Table-1, Toxic substances (Manganese(as Mn))	-
5.1.1, 5.1.2, 5.2, Table-1, Toxic substances (Chromium (as Cr))	-
5.1.1, 5.12, 5.2, Table-1, Toxic substances (Selenium (as Se))	-
5.1.1.5.1.2,5.2, Table-1, Toxic substances (Iron(as Fe))	-

-
Excluding Table 1 vi) Viscosity ix) Total organic carbon TOC

9444

BIS, Central Laboratory (CL)

None

IS 266 (1993)

Sulphuric acid - Specification (Third Revision)

Rs 8890.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1.2 (Description)	-
4.2 Table-1(iii) (Iron (as Fe),)	-
4.2&3 Table-1(iv) (Chlorides (as ),)	-
4.2, Table-1(vii) (Oxiddizable Impurities(as S02),)	-
4.2Table-1(viii) (Organic matter)	-
4.2 Table-1(xi) (Selenium(as Se),)	-
4.2 Table-1(xii) (Mangnese (as Mn),)	-
4.2Table-1(v) (Lead (as Pb))	-
4.2, Table-1(xiv) (Zinc (as Zn),)	-
4.2, Table-1(ix) (Nitrate)	-
4.2, Table-1(x) (Ammonia)	-
4.2 Table-1(iii) (Iron (as Fe),)	-

-
Excluding Lead, nitrate , nitrite, ammonia

9445

BIS, Central Laboratory (CL)

None

IS 9862 (2017)

Specification for ready mixed paint, brushing, bituminous, black, acid, alkali, water and chlorine resistlng (First Revision)

Rs 7760/ View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.2 (Lead restriction)	-
4.3, Table-1(i) (Drying time,(a) Hard dry)	-
4.3, Table-1(ii) (Consistency)	-
4.3, Table-1(iii) (Finish)	-
4.3, Table-1(iv) (Wet opacity)	-
4.3, Table-1(v) (Mass)	-
4.3, Table-1(vi) (Colour)	-
4.3, Table-1(vii) (Flaxibility and adhesion ( Bend test of the film by 6.25 mm Mandrel type-1 apparatus)	-
4.3, Table-1(ix) (Flash point)	-
4.3, Table-1(x) (Volatile matter content)	-
4.3, Table-1(xi) (Resistance to humidity under conditions of condensation)	-
4.3, Table-1(xiii) (Resistance to acid)	-
4.3, Table-1(xii) (Resistance to water)	-
4.3, Table-1(xiv) (Resistance to alkali)	-
4.3, Table-1(xvii) (Keeping properties)	-

-
Weather-o-meter, Karl Fischer equipment is required and for finish approved sample is required. Excluding Finish, Color, Water content, resistance to chlorine

9446

BIS, Central Laboratory (CL)

None

IS 573 (1992)

Trisodium phosphate - Specification (Fourth Revision)

- View breakup
Rs 5250/-for Technical Dodecahydrate, Rs.4050/- for Anydrous, Rs.8100/- for AR Dodecahydrate Rs 2025/- for A.R. dodecahydrate

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 (Description)	-
5.2, Table-1(i) (Matter insoluble in water)	-
5.2, Table-1(ii) (Phosphates(as P₂O₅))	-
5.2, Table-1(iii) (Carbonares(as Na₂CO₃))	-
5.2, Table-1(iv) (Carbonate Alkalinity (as NaOH))	-
5.2, Table-1(v) (Free sodium hydroxide (as NaOH))	-
5.2, Table-1(vi) (Total alkalinity ( as NaOH))	-
5.2, Table-1(ix) (Sulphates(as SO4))	-
5.2, Table-1(x) (Arsenic(as As2O3))	-
5.2, Table-1(xii) (Soluble silica(as SiO2))	-
5.2, Table-1(xiii) (Chloride (as Cl))	-

-
Excluding soluble iron compound, determination of nitrogen compounds (only for dodecahydrate ar grade)

9447

BIS, Western Regional Laboratory (WRL)

None

IS 1285 (2002)

Wrought aluminium and aluminium alloys - Extruded round tube and hollow sections for general engineering purposes - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5/5.1 (FREEDOM FROM DEFECTS)	-
5/5.2 (FREEDOM FROM DEFECTS)	-
7/a) Extruded round tube IS 2673 (DIMENSIONS AND TOLERANCE-Extruded round tube - outside Dia or Inside Dia)	-
7 of IS 1285 /a) Extruded round tube IS 2673 (DIMENSIONS AND TOLERANCE-Extruded round tube - outside Dia or Inside Dia)	-
7 of IS 1285 /a) Extruded round tube IS 2673 (DIMENSIONS AND TOLERANCE-Extruded round tube - Wall thickness)	-
7 of IS 1285 /a) Extruded round tube IS 2673 (DIMENSIONS AND TOLERANCE-Extruded round tube - Allowable Deviation of Mean Diameter from Specified Diameter (Size Tolerance))	-
7 of IS 1285 /a) Extruded round tube IS 2673 (DIMENSIONS AND TOLERANCE-Extruded round tube - Allowabte Deviation of Diameter at Any Point from Specified Diameter (Ovality Tolcrance))	-
7 of IS 1285 /a) Extruded round tube IS 2673 (DIMENSIONS AND TOLERANCE-Extruded round tube -Straightness)	-
7 of IS 1285 /a) Extruded round tube IS 2673 (DIMENSIONS AND TOLERANCE-Extruded round tube -Length)	-
7 of IS 1285 / b) Extruded hollow sections IS 6477 (DIMENSIONS AND TOLERANCE-Extruded hollow sections -SPECIFIED WIDTH or WIDTH ACROSS FLATS)	-
7 of IS 1285 / b) Extruded hollow sections IS 6477 (DIMENSIONS AND TOLERANCE-Extruded hollow sections -SPECIFIED Wall thickness)	-
7 of IS 1285 / b) Extruded hollow sections IS 6477 (DIMENSIONS AND TOLERANCE-Extruded hollow sections -Flatness)	-
7 of IS 1285 / b) Extruded hollow sections IS 6477 (DIMENSIONS AND TOLERANCE-Extruded hollow sections -Twist)	-
7 of IS 1285 / b) Extruded hollow sections IS 6477 (DIMENSIONS AND TOLERANCE-Extruded hollow sections - Lengths)	-
7 of IS 1285 / b) Extruded hollow sections IS 6477 (DIMENSIONS AND TOLERANCE-Extruded hollow sections -Straightness)	-
7 of IS 1285 / b) Extruded hollow sections IS 6477 (Extruded hollow sections -Twist -Permissible Twist in Total Length of piece- degrees)	-
7 of IS 1285 / b) Extruded hollow sections IS 6477 (Extruded hollow sections -Twist -Permissible Twist in Total Length of piece- At extremetiy)	-
7 of IS 1285 / b) Extruded hollow sections IS 6477 (Extruded hollow sections -Twist -Permissible Twist, Maximum allowable in Total Length- degrees)	-
7 of IS 1285 / b) Extruded hollow sections IS 6477 ("Extruded hollow sections -Twist -ALLOWABLE DEVIATION FROM SPECIFIED ANGLE, DEGREES")	-

-
Test facilities are not available for the following: 1. Tensile Test

9448

BIS, Central Laboratory (CL)

None

IS 2730 (1977)

Specification for magnesium sulphate (Epsom Salts) (First Revision)

- View breakup
Rs 3000/- for Pure; Rs 2100/- for Technical

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Description)	-
3.2 Table 1 .Sl No.i (Magnesium sulphate ( as MgSO4 ), ( calculated with reference to the material dried at 300°C),)	-
3.2 Table 1 .Sl No.vii (Matter insoluble in water)	-
3.2 Table 1 .Sl No.viii (Acidity or alkalinity)	-
3.2 Table 1 .Sl No.ii (Chlorides (as Cl))	-
3.2 Table 1 .Sl No.iii (Lead (as Pb))	-
3.2 Table 1 .Sl No.iv (Arsenic ( as As2O3 ))	-
3.2 Table 1 .Sl No.v (Iron as ( Fe ))	-
3.2 Table 1 .Sl No.vi (Zinc)	-
3.1 (Description)	-

-
Test facility for this parameter is complete

9449

BIS, Central Laboratory (CL)

None

IS 7021 (2017)

Protein - Rich food supplements for infants and pre - School children - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.3.3 Table 2 (Moisture)	-
4.3.3 Table 2 (Total Ash)	-
4.3.1 (Description)	-
4.3.2 (Flavour)	-
4.3.3 Table 2 (Crude Fibre)	-
4.3.3 Table 2 (Fat)	-
4.3.3 Table 2 (Protein)	-
4.3.3 Table 2 (Acid insoluble Ash)	-

-
500 gm x 3 Excluding 1-Vitamin C 2-Vitamin A 3- Vitamin D 4-Thiamine 5-Riboflavin 6-Niacin 7-Folate 8-Vitamin B12 9-Iron 10-Aflatoxin 11- Gossypol

9450

BIS, Central Laboratory (CL)

None

IS 6031 (1997)

Calcium propionate, food grade - Specification (First Revision)

Rs. 5430/- excluding Fluoride and Magnesium. View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.0 (DESCRIPTION)	-
4.1 (Identification Tests)	-
4.3, Table 1 (Moisture,)	-
4.2 (pH )	-
4.3, Table 1 (Matter insoluble in water)	-
4.3, Table 1 (Heavy metals)	-
4.3, Table 1 (Fe)	-
4.3, Table 1 (Magnesium (as MgO))	-
3.0 (DESCRIPTION)	-

-
Excluding cl. 3.4 and 6.1, i) Determination of Calcium Propionate Content; ii) Moisture viii) Magnesium

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number