BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

11238 Results

S.No.

Lab Name

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

9451

Electronics and IT Products Safety Testing Laboratory

IS 616 (2017)

Audio, video and similar electronic apparatus - Safety requirements (Fifth Revision)

96000.00 View breakup
Electronic Games (Video)-96,000/- Plasma/LCD/LED/Television of Screen upto 40″-96,000/- Optical Disc Players with built in amplifiers of input power 200 W and above-96,000/- Amplifiers with input power 2000 W and above-96,000/- Electronic Musical Systems with input power 200 W and above-96,000/- Power Adaptors for Audio Video & Similar Electronic Equipment-73,250/-

Clause No.	Exclusion	Remark
5(Marking and instructions)	-	Test charge for this clause is included
6(Hazardous radiations)	-	Test charge for this clause is included
7(Heating under normal operating conditions)	-	Test charge for this clause is included
8(Constructional requirements with regard to the protection against electric shock)	-	Test charge for this clause is included
9(Electric shock hazard under normal operating conditions)	-	Test charge for this clause is included
10(Insulation requirements)	-	Test charge for this clause is included
11(Fault conditions)	-	Test charge for this clause is included
12(Mechanical strength)	-	Test charge for this clause is included
13(CLEARANCES and CREEPAGE DISTANCES)	-	Test charge for this clause is included
14(Components)	-	Test charge for this clause is included
15(TERMINALS)	-	Test charge for this clause is included
16(External flexible cords)	-	Test charge for this clause is included
17(Electrical connections and mechanical fixings)	-	Test charge for this clause is included
19(Stability and mechanical hazards)	-	Test charge for this clause is included
20(Resistance to fire)	-	Test charge for this clause is included

Complete

18 Dec, 2022

-
Excluding the following test:- Laser radiation (Cl. 6.2), Light Emitting Diodes (LEDs) (Cl. 6.3), Heat resistance of insulating material (Cl. 7.2), Requirements for insulated winding wire (Cl. 8.16), Endurance test (Cl. 8.17), Printed Boards (Cl. 13.5), Terminals for external flexible cords (Cl. 15.3), MAINS supply flexible cords (Cl. 16.1), Flexible cords comprising hazardous live conductors (Cl. 16.3), Mechanical strength of picture tubes (Cl. 18.0)

9452

DELHI TEST HOUSE, Azadhpur

IS 303 (1989)

Plywood for General Purposes -

7000 View breakup
For BIS samples: 1.5 times of BIS testing charges, For others:

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8(Dimensions & Tolerances - Length - Cl. 8)	-	100	For BIS samples: 1.5 times of BIS testing charges
8(Dimensions & Tolerances - Width - Cl. 8)	-	100	For BIS samples: 1.5 times of BIS testing charges
8(Dimensions & Tolerances - Thickness - Cl. 8)	-	100	For BIS samples: 1.5 times of BIS testing charges
8(Dimensions & Tolerances - Squareness - Annexure C)	-	100	For BIS samples: 1.5 times of BIS testing charges
8(Dimensions & Tolerances - Edge Straightness - Annexure C)	-	100	For BIS samples: 1.5 times of BIS testing charges
11.2.1(Glue Adhesion - Water resistance test - 11.2.1.1 [for BWR Grade])	-	250	For BIS samples: 1.5 times of BIS testing charges
11.2.1(Glue Adhesion - Water resistance test - 11.2.1.1 [for MR Grade])	-	1000	For BIS samples: 1.5 times of BIS testing charges
11.2.2(Glue Adhesion - Mycological test - 11.2.2, Part 7 of IS 1734 [for MR Garde only])	-	2000	For BIS samples: 1.5 times of BIS testing charges
11.3(Moisture Content - Part 1 of IS 1734)	-	1000	For BIS samples: 1.5 times of BIS testing charges
5.2, Table 1, Table 2(Quality Requirements - Cl. 5.2)	-	500	For BIS samples: 1.5 times of BIS testing charges
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	0	For BIS samples: 1.5 times of BIS testing charges
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	1000	For BIS samples: 1.5 times of BIS testing charges
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-	0	For BIS samples: 1.5 times of BIS testing charges
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-	1000	For BIS samples: 1.5 times of BIS testing charges
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-	0	For BIS samples: 1.5 times of BIS testing charges
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-	1000	For BIS samples: 1.5 times of BIS testing charges
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-	0	For BIS samples: 1.5 times of BIS testing charges
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-	1000	For BIS samples: 1.5 times of BIS testing charges

Complete

-
-

9453

KC INDIA TEST LABORATORIES LLP

IS 9537 : Part 3 (1983)

Specification for conduits for electrical installations: Part 3 rigid plain conduits of insulating meterials

13750 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Marking)	-	40	20% discount to BIS
6.2(Durability of Marking as per 6.4 of IS: 9537 (Part 1)-1980)	-	35	20% discount to BIS
7.1.1(Maximum and minimum outside diameter of socket)	-	50	20% discount to BIS
7.2(Minimum inside diameter of conduit)	-	50	20% discount to BIS
7.3(Length of conduit)	-	50	20% discount to BIS
7.4(Unifomity of The wall Thickness)	-	74	20% discount to BIS
9.2(Bending Test i) At Room Temp ii) At Low Temp (-5 ±2°C))	-	177	20% discount to BIS
9.3(Compression Test as per caluse 9.3 of IS: 9537 (Part 1)-1980)	-	150	20% discount to BIS
9.4(Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-	1635	20% discount to BIS
9.5(Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-	285	20% discount to BIS
10(Resistance to Heat -Ball presure test)	-	168	20% discount to BIS
11(Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-	150	20% discount to BIS
12(Electrical Characteristics-Test for electric strength as per clause 12.1.1 of IS: 9537 (Part 1)-1980)	-	150	20% discount to BIS
12(Electrical Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-	150	20% discount to BIS

Complete

19 Jul, 2024

06 Jun, 2027

-
For sizes 20mm to 50mm.

9454

BIS, Eastern Regional Laboratory (ERL)

IS 1989 : Part 2 (1986)

Specification for leather safety boots and shoes: Part 2 for heavy metal industries (Fourth Revision)

For all

Rs 5100/- for safety boots, Rs.4500/- safety shoes View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 (Marking)	-
7 (Design)	-
8 (a) Upper Leather)	-
8 (b) Lining Leather)	-
8 (c) Bottom Material)	-
8 (d) Steel Toe Cap)	-
8 (e) Tape)	-
8 (f) Bottom Filling)	-
8 (g) Eyelet)	-
8 (h) Toe Compound)	-
8 (i) Threads)	-
8 (j) Rivets)	-
8 (k) Screw Wire)	-
8 (l) Heel Pin)	-
8 (m) Shank)	-
8 (n) Laces)	-
8 (o) Tongue Lining)	-
8 (p) Adhesive)	-
8 (q) Strengthening Piece)	-
8 (r) Leather Components)	-
9 (Manufacture)	-
10 (Finish)	-
11 (a) Boots with Leather Sole and Heel)	-
11 (b) Boots with Rubber Sole and Heel)	-
12 (Performance Test)	-
13 (Design)	-
14 (a) Upper Leather)	-
14 (b) Lining Leather)	-
14 (c) Bottom Material)	-
14 (d) Steel Toe Cap)	-
14 (e) Tape)	-
14 (f) Bottom Filling)	-
14 (g) Eyelet)	-
14 (h) Toe Compound)	-
14 (i) Threads)	-
14 (j) Rivets)	-
14 (k) Screw Wire)	-
14 (l) Heel Pin)	-
14 (m) Shank)	-
14 (n) Laces)	-
14 (o) Tongue Lining)	-
14 (p) Adhesive)	-
14 (q) Leather Components)	-
15 (Manufacture)	-
16 (Finish)	-
17 (a) Shoes with Leather Sole and Heel)	-
17 (b) Shoes with Rubber Sole and Heel)	-
18 (Performance Test)	-

Partial

-
Mech-Except Colour fastness (Cl 7, Cl 14) Mech- 2 pairs, Chem-1 pair

9455

BIS, Western Regional Laboratory (WRL)

IS 6528 (1995)

Stainless steel wire - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 6 (Workmanship)	-
Cl 9.1 & Table 3 (Diameter & Out Of Round)	-
Cl 10 (UTM)	-
Cl 10 (UTM)	-
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1) (Silicon)	-
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1) (Manganese)	-
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1) (Phosphorous)	-
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1) (Sulphor)	-
Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1) (Carbon)	-

Partial

-
Test facilities are not available for the following: 1. Al, Ni, Cr, Mo, Nitrogen

9456

BIS, Eastern Regional Laboratory (ERL)

IS 2573 (1986)

Specification for leather gauntlets and mittens (Second Revision)

- View breakup
Rs.7400/- (excluding shrinkage temperature test and test of length)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 4.2.1, Table 1, Sr. No. 1 (Solvent extractable substances)	-
Cl 4.2.1, Table 1, Sr. No. 2 (Chromium content, (as Cr₂O₃))	-
Cl 4.2.1, Table 1, Sr. No. 3 (pH of aqueous extract)	-
Cl.4.1 Fig. 1 to 3. (The three types shall be made to the shape and design as shown in Fig. 1 to 3.)	-
Cl .4.2.1 ( Leather - Chrome tanned/ chrome retanned full grain leather or flesh splits manufactured from cow or buffalo hides conforming to the following requirements shall be used a) The leather and flesh split shall have thickness of 1.0 to 1.5 mm;)	-
Cl.4.3.1.2 ( The hand part shall be cut from the piece of undyed leather and back portion including second, third and fourth fingers from different pieces of undyed leather.)	-
Cl. 4.3.1.3 ( The three different pieces of back portion shall be assembled and stitched together along the edges by a row of stitches. The back thus formed shall be secured with the corresponding front pieces ( palm side ) of the fingers with a row of stitches. The thumb shall be made from two pieces of undyed leather and closed with the hand part by a seam. The seam of the thumb shall be reinforced by a strip of leather and secured by two rows of stitches.)	-
Cl 4.3.1.4 ( The hand part shall be made with the flesh side up and the grain side to remain in contact with the hand.)	-
Cl.4.3.1.5 ( The cuff portion shall be made from two pieces of leather, the inner portion being of leather, chrome tanned, natural colour and the outer portion made of chrome tanned leather, with grain side out.)	-
Cl.4.3.2.6 ( The joint at the palm and the thumb shall be reinforced with the same quality of leather as used for the inner face and stitched by two rows of stitches.)	-
Cl.4.3.1.7 ( A dyed leather piece cut to the shape of a semi-circle shall be stitched on the inner part of the cuff along the joint of the hand and the cuff portions by a single row of stitches as shown in Fig. 1. The semi-circular piece of leather shall be not less than 75 mm in diameter.)	-
Cl.4.3.1.8 ( The gauntlets shall be machine stitched.)	-
Cl.4.3.1.9 ( The number of stitches for all the stitchings shall be 6 to 8 stitches per 25)	-
Cl.4.3.1.10 (All losse ends of stitching threads shall be securely fastened)	-
Cl.4.3.1.11 ( ship and finish, and in all other respects not defined in this standard, the gauntlets shall conform to the approved sample.)	-
Cl.4.3.2.2 ( The inner face of the gauntlets including the inner portion of index, second, third and fourth fingers shall be cut from one piece of leather. The thumb shall be cut from a separate piece of leather.)	-
Cl.4.3.2.3 ( The leather components shall be assembled with the flesh side up, the grain side being inside.)	-
Cl.4.3.2.4 ( The outer face of the gauntlets including index second, third and fourth fingers shall be cut from one piece of canvas.)	-
Cl.4.3.2.5 ( The thumb shall be made with the two cut sides placed together and stitched with one row of stitches. The thumb thus formed shall be attached to palm portion through the cut hole and secured by two rows of stitches as shown in Fig. 2.)	-
Cl.4.3.2.6 ( The joint at the palm and the thumb shall be reinforced with the same quality of leather as used for the inner face and stitched by two rows of stitches.)	-
Cl.4.3.2.7 ( The back portion made of canvas shall be secured with the corresponding palm piece made of leather by two rows of stitches with the edges of both leather and canvas placed inside.)	-
Cl.4.3.2.8 ( A leather strip, 20 mm wide and of the same quality of leather used for the inner face of the gauntlet, shall be used for reinforcing the face of canvas over the knuckles. The reinforcement piece shall be placed side up and secured by four rows of stitches.)	-
Cl.4.3.2.9 ( The cuff portion shall be made from one piece of canvas, the side edges being stitched together by double row of stitches with the ends placed inside. The cuff thus formed shall be secured to the hand part by two rows of stitches with the edges of the material placed inside. The bottom edge of the cuff shall be hemmed ( 6 mm ) with the row edges properly turned in.)	-
Cl.4.3.2.10 ( the gauntlets shall be machine stitched.)	-
Cl.4.3.2.11 ( The number of stitches for all the stitchings shall be 6 to 8 stitches per 25 mm. All loose ends of stitching threads shall be securely fastened.)	-
Cl.4.3.2.12 ( Workmanship and finish, and in all other respects not defined in this standard, the gauntlets shall conform to the approved sample.)	-
Cl.4.3.3.2 ( The palm including the inner component of the compartment for the four fingers shall be cut from one piece of leather and the thumb from a separate piece.)	-
Cl.4.3.3.3 ( The leather components shall be assembled with the flesh side out, the grain side being inside.)	-
Cl.4.3.3.4 ( The back portion including the outer component of the compartment for the four fingers shall be cut from one piece of canvas.)	-
Cl.4.3.3.5 ( The thumb shall be made with the two sides placed inside and stitched with a row of stitches. The thumb thus formed shall be attached to the palm through the cut hole and secured by two rows of stitches.)	-
Cl.4.3.3.6 (The joint at the palm and the thumb shall be reinforced by the same leather material and stitched by two rows of stitches as shown in Fig. 3.)	-
Cl.4.3.3.7 ( The back portion made of canvas shall be secured with the corresponding palm piece made of leather by two rows of stitches with the edges of both the leather and canvas placed inside.)	-
Cl.4.3.3.8 ( The entire palm portion may be lined with canvas of the same quality as used for the back, if required by the purchaser.)	-
Cl.4.3.3.9 (The reinforcement piece shall be placed flesh side out and secured by four rows of stitches.)	-
Cl.4.3.3.10 (The cuff portion shall be made from one piece of canvas, the side edges being stitched together with two rows of stitches with the ends placed inside.)	-
Cl.4.3.3.11 ( The cuff thus formed shall be secured to the hand part by two rows of stitches all along their edges and turned over subsequently.The bottom edges of the cuff shall be hemmed. 6.0 mm with the raw edge properly,turned in.)	-
Cl.4.3.3.12 ( The mittens shall be machine stitched.)	-
Cl.4.3.3.13 ( The number of stitches for all stitchings shall be 6 to 8 stitches per 25 mm)	-
Cl.4.3.3.14 ( All loose ends of stitching threads shall be securely fastened.)	-
Cl.4.3.3.15 (workmanship and finish, and in all other respects not defined in this standard, the mittens shall conform to the approved sample.)	-

Partial

-
except shrinkage temperature test of RM, Length in m/Kg

9457

BIS, Western Regional Laboratory (WRL)

IS 1875 (1992)

Carbon steel billets, blooms, slabs and bars for forgings - Specification (Fifth Revision)

Rs.5400/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1, 6.2 (phosphorus)	-
6.1, 6.2 (sulphur)	-
6.1, 6.2 (manganese)	-
6.1, 6.2 (silicon )	-
6.1, 6.2 (carbon)	-
Cl 7 (Workmanship)	-
Cl 8 (Diameter, Ovality & Weight)	-
9.1, table 2 (Tensile Strength)	-
9.1, table 2 (Yield Strength)	-
9.1, table 2 (Elongation)	-
9.2, table 2 (hardness test)	-
12.2 (Bend Test)	-

Partial

-
Test facilities are not available for the following: 1, Al, Ni, Cr, Cu, Mo, V, B, Sn 2. Grain size 3. Magnetic Particle 4. Blue Facture Test

9458

CIPET: CENTRE FOR SKILLING AND TECHNICAL SUPPORT (CSTS) - AURANGABAD

IS 11652 (2017)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg cement – Specification (third revision)

41092 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	250	--
Fig. 1- Table 1- Sr. no. ii (Ends per dm - Annex B 40 ± 2 )	-	250	--
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm )	-	250	--
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm )	-	250	--
Fig. 1- Table 1-Sr. no. i (Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm )	-	250	--
Fig. 1, Table 1 (i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm )	-	250	--
Fig. 1- Table 1-Sr. no. iii (Picks per dm-Annex B 40 ± 2 )	-	250	--
4.5(and the remaining overhang shall not be more than 5 mm after trimming.)	-	250	--
4.1(Raw Material )	-	1050	--
4.2 (Fabric)	-	5650	Tape testing for PP = 5650 Tape testing for HDPE = 5000 (Including Density) If pigmented tapeRs. 850 extra for colour fastness
4.2 (Linear Density, 900 denier)	-	500	--
4.2 (The woven fabric shall be of mesh, 10 × 10 per inch)	-	500	--
4.2 (The woven fabric shall be of weight, 79 g/m2 )	-	500	--
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	250	--
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	250	--
4.3(Sacks)	-	300	--
4.4(Seam The two rows of stitches shall be separated from each other by minimum 5 mm and )	-	250	--
4.4(Seam The outer stitch shall be minimum 8 mm from the outer edge of the sacks. )	-	250	--
4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used in the fabric.)	-	1050	--
4.5(Lamination )	-	1300	1050+250
4.5(Lamination )	-	250	--
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	250	--
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) Non-gusseted type 70 + 6%)	-	500	--
5/5.1(The mass of bale of sacks (excluding packing materials) shall be within ± 3 percent of the mass calculated by multiplying the number of sacks with the mass of sack specified in Table 1.)	-	0	--
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	1100	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25)	-	0	--
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	1100	--
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	1100	--
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25)	-	0	--
5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure)	-	1000	--
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	950	--
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	950	--
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to a) UV Radiation -Annex F )	-	10180	This is UV conditioning for 192 hrs
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to b) Accelerated Weathering - Annex F )	-	10180	--

Complete

31 Dec, 2026

-
For finished product

9459

Rajasthan Test & Research Centre

IS 4289 : Part 2 (2000)

Flexible cables for lifts and other flexible connections - Specification: Part 2 pvc insulated circular cables

- View breakup
For BIS Samples: 1.5 times of BIS Testing Charges. For Others: Rs.25,000/- Rs.2,000/- Each Additional Core (10% discount to BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

16 Aug, 2024

-
-

9460

National Test House (NR)

IS 1475 : Part 1 (2001)

Self - Contained drinking water coolers - Specification: Part 1 energy consumption and performance (Third Revision)

30000 View breakup
Rs.15000/-( for one water cooler), Rs.30000/- ( for two water cooler0

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(COMPONENTS AND THEIR MATERIALS)	-	500	-
6.2(COMPONENTS AND THEIR MATERIALS)	-	500	-
6.3(COMPONENTS AND THEIR MATERIALS)	-	500	-
6.4(COMPONENTS AND THEIR MATERIALS)	-	500	-
6.5(COMPONENTS AND THEIR MATERIALS)	-	500	-
6.6(COMPONENTS AND THEIR MATERIALS)	-	500	-
6.7(COMPONENTS AND THEIR MATERIALS)	-	500	-
6.8(COMPONENTS AND THEIR MATERIALS)	-	500	-
6.9(COMPONENTS AND THEIR MATERIALS)	-	500	-
6.1(COMPONENTS AND THEIR MATERIALS)	-	500	-
6.11(COMPONENTS AND THEIR MATERIALS)	-	500	-
6.12(COMPONENTS AND THEIR MATERIALS)	-	500	-
6.13(COMPONENTS AND THEIR MATERIALS)	-	500	-
6.14(COMPONENTS AND THEIR MATERIALS)	-	500	-
6.15(COMPONENTS AND THEIR MATERIALS)	-	500	-
6.16(COMPONENTS AND THEIR MATERIALS)	-	500	-
6.17(COMPONENTS AND THEIR MATERIALS)	-	500	-
7.7.1(Insulation Resistance)	-	3000	-
7.7.2(High Voltage Test)	-	3000	-
7.7.3(Cooling capacity rating test)	-	4000	-
7.7.4(Maximum operating conditions)	-	10000	-
7.8.2(Performance test)	-	1500	-

Complete

26 Oct, 2025

-
upto 250 liters

9461

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING AND TECHNOLOGY (CIPET):CSTS-BHOPAL

IS 14885 (2001)

Polyethylene pipes for the supply of gaseous fuels - Specification

54375 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.4(Colour)	-	300	-
6.1, Table-3(Nominal Outside Diameter of Pipes , Cl 6.3.1)	-	750	-
6.2.1, Table-4(Minimum Wall Thickness, Cl.6.3, Cl.6.2.1.1, Table-5)	-	0	-
6.4(Length of pipe)	-	0	-
6.1, Table-3(Ovality Pipe, Cl 6.3.2)	-	0	-
7, Table-6(Maximmn Out of Square of Each Pipe End)	-	0	-
8.1(Hydraulic Charactristics, Annex-A)	-	25100	Included: Type test 100 hrs/20 degree Centigrade, Type test 1000 hrs/80 degree Centigrade. Acceptance test : Notched pipe 165 hrs./80 degree centigrade, Plain pipe 165 hrs. / 80 degree centrigrade.
8.2(Reversion Test. Annex-C)	-	700	-
8.3(Density, Annex A of IS 7328)	-	500	-
8.4(Melt Flow Rate (MFR), IS 2530)	-	1100	-
8.5(Thermal Stability to Oxidation, Annex-D)	-	0	The Charges has already been taken in cl.no. 8.5 & Table-2 (Thermal Stability to Oxidation.
8.7(Tensile yield strength, Annex-J)	-	1350	-
8.7(Elongation at break, Annex-J)	-	1350	-
8.8(Resistance to Weathering, Annex-F)	-	9000	-
8.9(Squeeze off, Annex-G)	-	1300	-
8.6 & Table-2(Volatile Content: Annex-H of IS 14885)	-	700	-
8.5 & Table-2(Thermal Stability to Oxidation, Annex-D of IS 14885)	-	2200	-
Table-2, 5.1(Conventional Density, IS 7328:1992)	-	1125	-
Table-2, 5.1(Melt Flow Rate, IS 2530:1963)	-	1100	-
Table-2, 5.1(Thermal Staibility, Annex-D)	-	2200	-
Table-2, 5.1(Resistance to gas constituents, Cl 5.5)	-	5000	-
Table-2, 5.1(Pigment dispersion, Annex-E)	-	600	-
5.3(U.V.Stabilizer)	-	0	-

Complete

31 Dec, 2026

-
Percentage of antioxidant as per (Cl.5.2), Percentage of UV stabilizer as per (Cl.5.3)

9462

CIPET, Jaipur

IS 14885 (2001)

Polyethylene pipes for the supply of gaseous fuels - Specification

All grade & size

472775 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table-2, 5.1(Conventional Density, IS 7328:1992)	-	1125	Testing charges + Specimen (500+625)
4.4(Colour)	-	300	-
Table-2, 5.1(Melt Flow Rate, IS 2530:1963)	-	1100	-
Table-2, 5.1(Thermal Staibility, Annex-D)	-	2200	-
Table-2, 5.1(Resistance to gas constituents, Cl 5.5)	-	5000	Testing charges + Specimen (1000+4000)
Table-2, 5.1(Pigment dispersion, Annex-E)	-	600	-
5.2(Anti Oxidant: Cl. 17 of IS 2530)	-	0	-
5.3(U.V.Stabilizer)	-	0	-
6.1, Table-3(Ovality Pipe, Cl 6.3.2)	-	0	-
6.1, Table-3(Nominal Outside Diameter of Pipes , Cl 6.3.1)	-	250	-
6.2.1, Table-4(Minimum Wall Thickness, Cl.6.3, Cl.6.2.1.1, Table-5)	-	250	-
6.4(Length of pipe)	-	250	-
7, Table-6(Maximmn Out of Square of Each Pipe End)	-	0	-
8.1(Hydraulic Charactristics, Annex-A)	-	25100	Type test (100 hrs./20°C):4000, Type test (1000 hrs./80°C): 11000+250, Notched Pipe (165 hrs./80°C):4800+250, Plain Pipe (165 hrs./80°C):4800
8.2(Reversion Test. Annex-C)	-	900	Testing charges + Specimen (700+200)
8.3(Density, Annex A of IS 7328)	-	500	-
8.4(Melt Flow Rate (MFR), IS 2530)	-	1100	-
8.5(Thermal Stability to Oxidation, Annex-D)	-	2200	-
8.7(Tensile yield strength, Annex-J)	-	1350	Testing charges + Specimen (1100+250)
8.7(Elongation at break, Annex-J)	-	1350	Testing charges + Specimen (1100+250)
8.8(Resistance to Weathering, Annex-F)	-	9000	-
8.9(Squeeze off, Annex-G)	-	1300	-
8.6 & Table-2(Volatile Content: Annex-H of IS 14885)	-	700	-
8.5 & Table-2(Thermal Stability to Oxidation, Annex-D of IS 14885)	-	2200	-

Complete

21 Feb, 2026

-
-

9463

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING AND TECHNOLOGY (CIPET):CSTS-BHOPAL

IS 14928 (2001)

Textiles - Composite synthetic fibre ropes - Specification

3050 View breakup
Rs.2538/- (After 25% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

31 Dec, 2026

-
-

9464

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING AND TECHNOLOGY (CIPET):CSTS-BHOPAL

IS 14929 (2001)

Textiles - High strength polyolefins copolymer ropes - Specification

5250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(MANUFACTURE)	-	2000	NIL
5.2.1(Construction)	-	300	NIL
5.2.2(Construction)	-	0	CHARGES ALREADY HAS TAKEN IN CLAUSE NO. 5.2.1
5.2.3(Construction)	-	0	CHARGES ALREADY HAS TAKEN IN CLAUSE NO. 5.2.1
5.3(Structure)	-	300	NIL
5.4( Rope)	-	300	NIL
6.1, Table 1 /Table 2.( REQUIREMENTS:- Linear Density)	-	500	NIL
6.1, Table 1 /Table 2.( Breaking Strength, Min)	-	1100	NIL
6.2, Table 1 and Table 2( Mass of the Coil)	-	250	NIL
6.3( Length of Coil)	-	250	NIL
8.1 (a)( MARKING)	-	250	NIL
8.1 (b)( MARKING)	-	0	CHARGES ALREADY HAS TAKEN IN CLAUSE NO. 8.1
8.1 (c)( MARKING)	-	0	CHARGES ALREADY HAS TAKEN IN CLAUSE NO. 8.1
8.1 (d)( MARKING)	-	0	CHARGES ALREADY HAS TAKEN IN CLAUSE NO. 8.1
8.1 (e)( MARKING)	-	0	CHARGES ALREADY HAS TAKEN IN CLAUSE NO. 8.1

Complete

31 Dec, 2026

-
-

9465

DELHI TEST HOUSE, Azadhpur

IS 1165 (2002)

Milk powder - Specification (First Revision)

- View breakup
Rs.7500.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
-

9466

Rajasthan Test & Research Centre

IS 9968 : Part 2 (2002)

Specification for elastomer - Insulated cables: Part 2 for working voltages from 3.3 kV up to and including 33 kV (First Revision)

270000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(CONDUCTORS: Cables for Fixed Installation)	-	0	-
4.2(CONDUCTORS:Flexible Cables)	-	0	-
5(INSULATION)	-	0	-
6(SEMICONDUCTING COMPOUND)	-	0	-
7.1(Proofed Tape)	-	0	-
7.1(Proofed Tape: Thickness)	-	500	-
7.2(Polyethylene Terephthalate ( P E T P ) or Polypropylene Base Tape : Thickness)	-	500	-
7.3(Tape )	-	0	-
8(SCREENING)	-	0	-
9(CENTRE AND FILLERS)	-	0	-
10(ARMOUR)	-	0	-
11.1(Inner Sheath)	-	0	-
11.2(Outer Sheath)	-	0	-
12.1(Tapes)	-	0	-
12.2(Cords and Yarns)	-	0	-
13.1 & 13.2(CONSTRUCTION:CONDUCTORS-Cables for Fixed Installations/Flexible Cables)	-	0	-
13.3(Earthing Conductor)	-	0	-
13.3.1(Earthing Conductor)	-	0	-
13.4(Separator Tape)	-	0	-
14(CONDUCTOR SCREENING)	-	0	-
15.1(INSULATION : Application)	-	0	-
15.2(Thickness of Insulation)	-	500	-
15.3(Tolerance on Thickness of Insulation)	-	0	-
16.1(INSULATION SCREENING : Application)	-	0	-
16.2(INSULATION SCREENING : Parts )	-	0	-
16.3(INSULATION SCREENING : Non Metallic Parts )	-	0	-
16.4(INSULATION SCREENING : Metallic Parts )	-	0	-
17(CORE IDENTIFICATION)	-	0	-
17(CORE IDENTIFICATION: Unscreed cable )	-	0	-
18.1(LAYING UP OF CORES)	-	0	-
18.2(LAYING UP OF CORES : Flexible cable)	-	0	-
18.3(LAYING UP OF CORES : Binder Tape)	-	0	-
19.1(Inner Sheath : Application)	-	0	-
19.2(Thickness of Inner Sheath)	-	500	-
19.3(Inner Sheath : proofed tape)	-	0	-
20.1(ARMOURING: Application)	-	0	-
20.2(Type of Armour)	-	0	-
20.2 1.2(Direction of lay of armour)	-	0	-
20.2 1.3(Joint in armour)	-	0	-
20.2.2(Filling Factot )	-	0	-
20.2.2(Diameter of braiding)	-	500	-
20.2.2.1(Braiding material)	-	0	-
20.3(Substitution of the galvanized steel wires/formed)	-	0	-
21.1(OUTER SHEATH)	-	0	-
21.2(Coulor of Outer sheath)	-	0	-
21.3(Thickness of Outer Sheat: Average)	-	500	-
21.3(Thickness of Outer Sheat: Minimum)	-	0	-
22.1 a)1)(Annealing test (for copper) - IS 10810: Part 1)	-	1200	-
22.1 a)2)(Tensile test (for aluminium) -IS 10810: Part 2)	-	1000	-
22.1 a)3)(Wrapping Test (for aluminium) - IS 10810: Part 3)	-	500	-
22.1 a)4)(Conductor resistance test)	-	1000	-
22.1 a)5)(Persulphate test (tinned copper conductor)- IS 10810: Part 4)	-	1200	-
22.1 b)1)(Test for Galvanized Steel Wires/Formed Wires 1) Dimensions -IS 10810: Part 36)	-	700	-
22.1 b)2)i)(Test for Galvanized Steel Wires/Formed Wires 2) Tensile Strentgh -IS 10810: Part 37)	-	500	-
22.1 b)2)ii)(Test for Galvanized Steel Wires/Formed Wires 2) Elongation at break -IS 10810: Part 37)	-	500	-
22.1 b)2)iii)(Test for Galvanized Steel Wires/Formed Wires 3) Torsion (for round wires only) -IS 10810: Part 38)	-	1500	-
22.1 b)2)iv)(Test for Galvanized Steel Wires/Formed Wires 4) Winding (for strips only) -IS 10810: Part 39)	-	1500	-
22.1 b)2)v)(Test for Galvanized Steel Wires/Formed Wires 5) Zinc coating : Uniformity-IS 10810: Part 40)	-	500	-
22.1 b)2)vi)(Test for Galvanized Steel Wires/Formed Wires 5) Zinc coating : Mass -IS 10810: Part 41)	-	1000	-
22.1 b)2) vii) (Resistivity - IS 10810: Part 42)	-	1000	-
22.1 c)2)(Physical Tests for Insulation : Tensile Strenth - IS 10810: Part 7)	-	500	-
22.1 c)2)(Physical Tests for Insulation : Elongation - IS 10810: Part 7)	-	500	-
22.1 c)2)(Physical Tests for Sheath : Tensile Strenth - IS 10810: Part 7)	-	500	-
22.1 c)2)(Physical Tests for Sheath : Elongation - IS 10810: Part 7)	-	500	-
22.1 c)3)(Physical Tests for Insulation ( Ageing in air oven): Tensile Strenth - IS 10810: Part 11)	-	1250	-
22.1 c)3)(Physical Tests for Insulation ( Ageing in air oven): Tensile Strenth Variation - IS 10810: Part 12)	-	0	-
22.1 c)3)(Physical Tests for Insulation( Ageing in air oven) : Elongation - IS 10810: Part 11)	-	1250	-
22.1 c)3)(Physical Tests for Insulation( Ageing in air oven) : Elongation variation - IS 10810: Part 12)	-	0	-
22.1 c)3)(Physical Tests for Sheath( Ageing in air oven) : Tensile Strenth - IS 10810: Part 11)	-	1250	-
22.1 c)3)(Physical Tests for Sheath( Ageing in air oven) : Tensile Strenth variation - IS 10810: Part 12)	-	0	-
22.1 c)3)(Physical Tests for Sheath ( Ageing in air oven): Elongation - IS 10810: Part 11)	-	1250	-
22.1 c)3)(Physical Tests for Sheath ( Ageing in air oven): Elongation variation - IS 10810: Part 12)	-	0	-
22.1 c)4)(Physical Tests for Insulation ( Ageing in air bomb): Tensile Strenth variation - IS 10810: Part 56)	-	2500	-
22.1 c)4)(Physical Tests for Insulation( Ageing in air bomb) : Elongation variation - IS 10810: Part 56)	-	2500	-
22.1 c)4)(Physical Tests for Sheath(Ageing in air bomb) : Tensile Strenth variation - IS 10810: Part 56)	-	2500	-
22.1 c)4)(Physical Tests for Sheath ( Ageing in air bomb): Elongation variation - IS 10810: Part 56)	-	2500	-
22.1 c)5)(Physical Tests for Insulation :Hot set Elongation - IS 10810: Part 30)	-	1000	-
22.1 c)5)(Physical Tests for Insulation :Permanent set - IS 10810: Part 30)	-	500	-
22.1 c)5)(Physical Tests for Sheath :Hot set Elongation - IS 10810: Part 30)	-	1000	-
22.1 c)5)(Physical Tests for Sheath :Permanent set - IS 10810: Part 30)	-	500	-
22.1 c)6)(Physical Tests for Sheath(Oil resistance test) : Tensile Strenth Variation - IS 10810: Part 31)	-	2250	-
22.1 c)6)(Physical Tests for Sheath ( Oil resistance test): Elongation Variation - IS 10810: Part 31)	-	2250	-
22.1 c)7)(Tear Resistance test - IS 10810: Part 17)	-	5400	-
22.1 c)8)(Shrinkage : Insulation - IS 10810: Part 12)	-	1000	-
22.1 c)8)(Shrinkage test- Crack observed : Insulation - IS 10810: Part 13)	-	500	-
22.1 c)8)(Shrinkage test : Sheath - IS 10810: Part 12)	-	1000	-
22.1 c)8)(Shrinkage test - Crack oberved : Sheath - IS 10810: Part 13)	-	500	-
22.1 c)9)(Hot deformation test : Insulation - IS 10810: Part 15)	-	1500	-
22.1 c)9)(Hot deformation test : Sheath - IS 10810: Part 15)	-	1500	-
22.1 c)10)(Loss of mass in air oven : Insulation - IS 10810: Part 10)	-	2500	-
22.1 c)10)(Loss of mass in air oven : Sheath - IS 10810: Part 10)	-	2500	-
22.1 c)11)(Heat shock : Insulation - IS 10810: Part 14)	-	1500	-
22.1 c)11)(Heat shock : Sheath - IS 10810: Part 14)	-	1500	-
22.1 c)12)(Thermal stability : Insulation - IS 10810: Part 60)	-	1000	-
22.1 c)12)(Thermal stability : Sheath - IS 10810: Part 60)	-	1000	-
22.1 d)(Insulation Resistance Test: Volume resistivity )	-	1500	-
22.1 d)(Insulation Resistance Test: Insulation resistance constant )	-	1000	-
22.1 e)(Partial Discharge Test)	-	42500	-
22.1 f)(Bending Test Followed by Partial Discharge Test)	-	4500	-
22.1 g)(Dielectric Power Factor Test 1) As a function of Voltage)	-	7500	-
22.1 g)(Dielectric Power Factor Test 1) As a function of temperature)	-	7500	-
22.1 h)(Heating Cycle Test)	-	35500	-
22.1 j)(Impulse Withstand Test)	-	35500	-
22.1 k)(High Voltage Test for Four Hours)	-	7500	-
22.1 m)(Water Absorption Test - IS 10810: Part 28)	-	4500	-
22.1 n)(Flammability)	-	3000	-
24.1(Manufacturer's Identification)	-	0	-
24.2(Voltage Identification)	-	0	-
24.3(Cable Code)	-	0	-
25.2.1(Marking on drum )	-	0	-
25.2.2(BIS Certification Marking)	-	0	-

Complete

16 Aug, 2024

-
-

9467

Bharat Test House Pvt Ltd 1474 Haryana

IS 15111 : Part 2 (2002)

Self ballasted lamps for general lighting services: Part 2 performance requirements

Self Ballasted Lamps for General Lighting Services

65000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(DIMENSIONS)	-	1500	5% discount for BIS
8.1(STARTING AND RUN-UP)	-	1000	5% discount for BIS
8.2(STARTING AND RUN-UP)	-	1000	5% discount for BIS
9(Lamp Wattage)	-	2500	5% discount for BIS
10(Luminous Flux)	-	2500	5% discount for BIS
11(Colour)	-	3500	5% discount for BIS
12(LUMEN MAINTENANCE)	-	10000	5% discount for BIS
13.1(Life)	-	17500	5% discount for BIS
14(Harmonics)	-	3000	5% discount for BIS
15(Lamp Efficacy)	-	2500	5% discount for BIS
16(Power factor)	-	2500	5% discount for BIS
13.2(Life)	-	17500	5% discount for BIS

Complete

19 Mar, 2026

-
-

9468

Bharat Test House Pvt Ltd 1474 Haryana

IS 15111 : PART 1 AND PART 2 (2002)

Self ballasted lamps for general lighting services: Part 1 safety requirements

Compact Fluorescent Lamp

35000 View breakup
Rs. 35000/-(5% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Marking)	-	125	5% discount for BIS
6.2(Marking)	-	125	5% discount for BIS
6.3(Marking)	-	125	5% discount for BIS
6.4(BIS Certification Marking)	-	125	5% discount for BIS
7(Interchangeability )	-	3000	5% discount for BIS
8(Protection against electric shock)	-	2500	5% discount for BIS
9.1(INSULATION RESISTANCE AND ELECTRIC STRENGTH After HUMIDIT’Y TREATMENT)	-	5000	5% discount for BIS
9.2(The insulation resistance of B 22 caps between shell and contact shall be not less than 5 MΩ When measure with a 500 voltage DC.)	-	2500	5% discount for BIS
9.3(Electric Strength)	-	2500	5% discount for BIS
10(Mechanical strength test )	-	2000	5% discount for BIS
11(Cap Temperature rise test )	-	3000	5% discount for BIS
12(Resistance to heat)	-	5000	5% discount for BIS
13(Resistance to Flame and Ignition)	-	7000	5% discount for BIS
14(Fault Conditions)	-	1750	5% discount for BIS
15(Mercury Content )	-	250	5% discount for BIS

Complete

19 Mar, 2026

-
Included w.e.f 13.05.2020

9469

National Test House (NR)

IS 2645 (2003)

Integral waterproofing compounds for cement mortar and concrete - Specification (Second Revision)

Type - Powder form/ Liquid form

10000 View breakup
Rs.9000/- [ Rs.8000/-for Mechanical, Rs.1000/- for Chemical]

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 3.1(The permeability of water in specimen Prepared with WPC shall be less than half the permeability of plain cement specimens. (i.e ; < 50 percent))	-	3000	-
Cl 3.2(Initial & Final)	-	500	-
Cl 3.2(Initial & Final)	-	500	-
Cl 3.3(Compressive Strength, At 3days & 7 days)	-	2000	-
Cl 3.3(Compressive Strength, At 3days & 7 days)	-	2000	-
Clause 3.4(Chloride content)	-	1000	-
Clause 3.4(Chloride content)	-	1000	-

Complete

26 Oct, 2025

-
-

9470

DELHI TEST HOUSE, Azadhpur

IS 4989 : Part 4 (2003)

Multipurpose aqueous film forming foam liquid concentrate for extinguishing hydrocarbon and polar solvent fires - Specification

- View breakup
Rs.31700/- (Provisional testing charges)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

-
-

9471

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING AND TECHNOLOGY (CIPET):CSTS-BHOPAL

IS 15265 (2003)

Flexible pvc pipes or polymer reinforced thermoplastic hoses for suction and delivery lines of agricultural pumps - Specification

29475 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1 Table 1(Internal Diameter)	-	250	-
5.2 Table 2(Length)	-	0	Test charges has already been taken in cl . no. 5.1
6.1 Table 3(Hydrostatic test atatmospheric condition)	-	1000	-
6.2 Table 4(Hydrostatic test at 55± 2°C)	-	1000	-
6.3(Pressure Impulse Test Annex B)	-	15000	-
6.4(Vaccum Test requirement Annex C)	-	2000	-
6.5(Reinforce Facture Test Requirement Annex D)	-	1000	-
6.6(Minimum Bend Radius Requirement- Annex E )	-	1000	-
6.7(Cold Bend Radius Requirement- Annex E )	-	2500	-
6.8(Loss in Mass on Heating- Annex F)	-	1925	-
6.9(Effect of Sunlight)	-	3500	-

Complete

31 Dec, 2026

-
-

9472

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING AND TECHNOLOGY (CIPET):CSTS-BHOPAL

IS 15328 (2003)

Unplasticized Non-Pressure Polyvinyl Chloride ( PVC -U ) Pipes for use in Underground Drainage and Sewerage Systems -

26800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5,5.2(Composition of the material The material shall contain a minimum of 0.3 percent of rutile grade titanium dioxide.)	-	1200	-
6.1,6.1.1 IS 12235 (Part 1) Table 1(Dimension of Pipes: Mean outside Diameter, dem)	-	500	-
6.1,6.1.1 IS 12235 (Part 1) Table 1(Outside Diameter at any point, de)	-	0	THE TESTING CHARGES HAS BEEN TAKEN ALREADY IN CLAUSE NO. 6.1, 6.1.1 .
6.1.2 IS 4985 Table 2(Wall Thickness, e )	-	0	THE TESTING CHARGES HAS BEEN TAKEN ALREADY IN CLAUSE NO. 6.1, 6.1.1 .
6.1.3 (Length of Pipe)	-	0	THE TESTING CHARGES HAS BEEN TAKEN ALREADY IN CLAUSE NO. 6.1, 6.1.1 .
6.1.4, Table 3(Dimensions of integral sockets and spigot ends :- a) Elastomeric Sealing Ringsockets and spigot ends i)Meean inside dia. Of socket, dsm)	-	0	THE TESTING CHARGES HAS BEEN TAKEN ALREADY IN CLAUSE NO. 6.1, 6.1.1 .
6.1.4, Table 3(ii) Min. depth of engagement, A. )	-	0	THE TESTING CHARGES HAS BEEN TAKEN ALREADY IN CLAUSE NO. 6.1, 6.1.1 .
6.1.4 Table 3(iii) Depth of sealing Zone C )	-	0	THE TESTING CHARGES HAS BEEN TAKEN ALREADY IN CLAUSE NO. 6.1, 6.1.1 .
6.1.4, Table 3(iv) Length of spigot, l1)	-	0	THE TESTING CHARGES HAS BEEN TAKEN ALREADY IN CLAUSE NO. 6.1, 6.1.1 .
6.1.4, Table 3(v) Chamfer length, H : Approx.)	-	0	THE TESTING CHARGES HAS BEEN TAKEN ALREADY IN CLAUSE NO. 6.1, 6.1.1 .
6.1.4.1 (wall thickness of sockets e2 min=0.9e )	-	0	THE TESTING CHARGES HAS BEEN TAKEN ALREADY IN CLAUSE NO. 6.1, 6.1.1 .
6.1.4.1 (e3min=0.75e)	-	0	THE TESTING CHARGES HAS BEEN TAKEN ALREADY IN CLAUSE NO. 6.1, 6.1.1 .
6.1.4, Table 4(b) Solvent Cement Joint sockets and spigot ends i) Mean inside dia. Of socket, dsm)	-	0	THE TESTING CHARGES HAS BEEN TAKEN ALREADY IN CLAUSE NO. 6.1, 6.1.1 .
6.1.4, Table 4(ii) Length of Solvent Cement socket, l2 )	-	0	THE TESTING CHARGES HAS BEEN TAKEN ALREADY IN CLAUSE NO. 6.1, 6.1.1 .
6.1.4, Table 4(iii) Length of spigot, l1, 100 mm Min.)	-	0	THE TESTING CHARGES HAS BEEN TAKEN ALREADY IN CLAUSE NO. 6.1, 6.1.1 .
6.1.4, Table 4(iv) Chamfer length, H, 7 mm Approx.)	-	0	THE TESTING CHARGES HAS BEEN TAKEN ALREADY IN CLAUSE NO. 6.1, 6.1.1 .
7(Physical characteristics )	-	0	-
7.1(Appearance:- )	-	300	-
7.2(Colour )	-	0	THE TESTING CHARGES HAS BEEN TAKEN ALREADY IN CLAUSE NO. 7.1.
7.3 IS 1223S ( Part 2)(Vicat Softening Temperature When determined according to IS 1223S ( Part 2), shall not be lessthan 79°C.)	-	1100	-
7.4 IS 1223S ( Part 5)(Longitudinal Reversion: When tested according to the methodprescribed in IS 1223S ( Part 5), shall not exceed ± 5 percent. The pipe shall not exhibit any blisters, bubbles or crackson completion of the test.)	-	1000	-
8(MECHANICAL CHARACTERISTICS)	-	0	-
8.1 Annex B(Resistance to External Blows at 0ºC: When tested according to the method prescribed in Annex B, the pipes hall have a true impact rate of not more than I0 percent.)	-	1400	-
8.2 Annex C Table 5(Ring Stiffness: When tested according to the method described in Annex C,the ring stiffness of the pipe shall be as stated in Table 5)	-	1400	-
8.3 IS 12235 ( Part 8/ Sec 1 ) Table 6(Resistance to internal Hydrostatic Pressure(Type Test) a) Acceptance Test:(1h at 27 0 C) )	-	850	-
8.3 IS 12235 ( Part 8/ Sec 1 ) Table 6(b) Type Test:(1000h at 60 0 C) )	-	11000	-
9 9.1, IS 5382(JOINTS:- a) Elastomeric Sealing Rings)	-	850	-
9.2 IS 14182(b) Solvent cement)	-	850	-
10(Performance requirements)	-	0	-
10.1.1 Annex D(Internal hydrostatic pressure test for elastomeric sealing ring joints)	-	1000	-
10.1.2 Annex E(Internal negative hydrostatic pressure test (internal vacuum) for elastomeric sealing ring joints)	-	0	THE TESTING CHARGES HAS TAKEN ALREADY IN CLAUSE NO. 10.1.1
10.2.1(Internal hydrostatic pressure test for solvent cemented Joints)	-	1000	-
10.2.2(Internal negative hydrostatic pressure test (internal vacuum)for solvent cemented joints)	-	0	CHARGES HAS ALREADY TAKEN IN CLAUSE NO. 10.2.2.
'7.5 (amdt.7)(Effect on Water (Type test))	-	3000	-
15.4 (b)(Cold impact)	-	1100	-
9.1(PIPE ENDS)	-	250	-

Complete

31 Dec, 2026

-
-

9473

CIPET, Jaipur

IS 15328 (2003)

Unplasticized Non-Pressure Polyvinyl Chloride ( PVC -U ) Pipes for use in Underground Drainage and Sewerage Systems -

All

22700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.2(Colour )	-	300	-
5,5.2(Composition of the material The material shall contain a minimum of 0.3 percent of rutile grade titanium dioxide.)	-	1200	-
6.1,6.1.1 IS 12235 (Part 1) Table 1(Dimension of Pipes: Mean outside Diameter, dem)	-	500	-
6.1,6.1.1 IS 12235 (Part 1) Table 1(Outside Diameter at any point, de)	-	0	-
6.1.2 IS 4985 Table 2(Wall Thickness, e )	-	0	-
6.1.3 (Length of Pipe)	-	0	-
6.1.4, Table 3(Dimensions of integral sockets and spigot ends :- a) Elastomeric Sealing Ringsockets and spigot ends i)Meean inside dia. Of socket, dsm)	-	0	-
6.1.4, Table 3(ii) Min. depth of engagement, A. )	-	0	-
6.1.4 Table 3(iii) Depth of sealing Zone C )	-	0	-
6.1.4, Table 3(iv) Length of spigot, l1)	-	0	-
6.1.4, Table 3(v) Chamfer length, H : Approx.)	-	0	-
6.1.4.1 (wall thickness of sockets e2 min=0.9e )	-	0	-
6.1.4.1 (e3min=0.75e)	-	0	-
6.1.4, Table 4(b) Solvent Cement Joint sockets and spigot ends i) Mean inside dia. Of socket, dsm)	-	0	-
6.1.4, Table 4(ii) Length of Solvent Cement socket, l2 )	-	0	-
6.1.4, Table 4(iii) Length of spigot, l1, 100 mm Min.)	-	0	-
6.1.4, Table 4(iv) Chamfer length, H, 7 mm Approx.)	-	0	-
7(Physical characteristics )	-	0	-
7.1(Appearance:- )	-	300	-
7.1(Appearance:- )	-	300	-
7.3 IS 1223S ( Part 2)(Vicat Softening Temperature When determined according to IS 1223S ( Part 2), shall not be lessthan 79°C.)	-	1100	-
7.4 IS 1223S ( Part 5)(Longitudinal Reversion: When tested according to the methodprescribed in IS 1223S ( Part 5), shall not exceed ± 5 percent. The pipe shall not exhibit any blisters, bubbles or crackson completion of the test.)	-	1000	Testing charges+ specimen ( 700+300)
8.1 Annex B(Resistance to External Blows at 0ºC: When tested according to the method prescribed in Annex B, the pipes hall have a true impact rate of not more than I0 percent.)	-	1400	Testing charges+ specimen ( 1100+300)
8.2 Annex C Table 5(Ring Stiffness: When tested according to the method described in Annex C,the ring stiffness of the pipe shall be as stated in Table 5)	-	1400	Testing charges+ specimen ( 1100+300)
8.3 IS 12235 ( Part 8/ Sec 1 ) Table 6(Resistance to internal Hydrostatic Pressure(Type Test) a) Acceptance Test:(1h at 27 0 C) )	-	850	-
8.3 IS 12235 ( Part 8/ Sec 1 ) Table 6(b) Type Test:(1000h at 60 0 C) )	-	11000	-
9 9.1, IS 5382(JOINTS:- a) Elastomeric Sealing Rings)	-	0	-
9.2 IS 14182(b) Solvent cement)	-	0	-
10.1.1 Annex D(Internal hydrostatic pressure test for elastomeric sealing ring joints)	-	850	-
10.1.2 Annex E(Internal negative hydrostatic pressure test (internal vacuum) for elastomeric sealing ring joints)	-	1000	-
10.2.1(Internal hydrostatic pressure test for solvent cemented Joints)	-	850	-
10.2.2(Internal negative hydrostatic pressure test (internal vacuum)for solvent cemented joints)	-	1000	-
'7.5 (amdt.7)(Effect on Water (Type test))	-	3000	-

Complete

21 Feb, 2026

-
-

9474

CIPET, Hajipur

IS 15410 (2003)

Containers for packaging of natural mineral water and packaged drinking water - Specification

9250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.0 (chem)(MATERIAL)	-	1050	-
4.1 (chem)(Workmanship and Finish)	-	300	-
4.2 (chem)(Design, Shape & Dimension)	-	300	-
4.3(Workmanship, Finish & Appearance)	-	300	-
4.4 , clause 5 of IS:2798:1998(Brimful capacity in ml)	-	250	-
4.5, IS:2798:1998(Wall thickness- Bottom, in mm)	-	300	-
4.5, IS:2798:1998(Wall thickness- Middle , in mm)	-	300	-
4.5, IS:2798:1998(Wall thickness- Top , in mm )	-	300	-
4.6.2(TRANSPARANCY)	-	700	-
4.6.3(LEAKAGE TEST)	-	1000	-
4.6.4(DROP TEST)	-	1100	-
4.6.5(MIGRATION TEST)	-	1700	-
4.6.6(PORTABILITY TEST)	-	2900	-
4.6.6 (chem)(Water Potability test (after 30 days) (a) Taste (b) Odour)	-	2900	-
4.6.5.1 (chem)(Colour migration (Caps))	-	1700	-
4.6.5.1 (chem)(Colour migration (Container))	-	1700	-
4.6.5 , IS:9845:1998 (chem)(Migration of Caps - a. Amount of extractive)	-	1700	-
4.6.5 , IS:9845:1998 (chem)(Migration- b. Amount of extractive)	-	1700	-
4.6.5 , IS:9845:1998 (chem)(Migration- a. Amount of extractive)	-	1700	-
4.6.3, clause 6 of IS:2798:1998(Leakage test- c. Air pressure leakage)	-	0.0	-
4.6.3, clause 6 of IS:2798:1998(Leakage test- b. Vibration leakage)	-	1000	-
4.6.3, clause 6 of IS:2798:1998(Leakage test- a. Closure leakage )	-	0.0	-

Complete

07 Oct, 2025

-
-

9475

CIPET, Jaipur

IS 15410 (2003)

Containers for packaging of natural mineral water and packaged drinking water - Specification

All

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.0 (chem)(MATERIAL)	-	1050	-
4.6.2(TRANSPARANCY)	-	700	-
4.6.3(LEAKAGE TEST)	-	1000	-
4.6.4(DROP TEST)	-	1100	-
4.6.5(MIGRATION TEST)	-	2000	Testing charges + specimen ( 1700+300)
4.6.6(PORTABILITY TEST)	-	900	-
4.6.5.1 (chem)(Colour migration (Caps))	-	300	-
4.6.5.1 (chem)(Colour migration (Container))	-	300	-
4.5, IS:2798:1998(Wall thickness- Bottom, in mm)	-	250	-
4.5, IS:2798:1998(Wall thickness- Middle , in mm)	-	0	-
4.5, IS:2798:1998(Wall thickness- Top , in mm )	-	0	-
4.4 , clause 5 of IS:2798:1998(Brimful capacity in ml)	-	0	-
4.3(Workmanship, Finish & Appearance)	-	0	-

Complete

21 Feb, 2026

-
-

9476

Bharat Test House Pvt Ltd 1474 Haryana

IS 418 (2004)

Tungsten filament lamps for domestic and similar general lighting purposes (Fourth Revision)

Tungsten Filament Lamp (Bulb)

72000 View breakup
At rated voltage Upto 25W:Rs.38500/-,Upto 40W: Rs.40000/-,Upto 60W:Rs.45000/-,Upto 100W:Rs.72000/-,Upto 200W:Rs.120000/-, At 110% voltage Upto 25W-Rs.25000/-,Upto 40W-Rs.27000/-, Upto 60W-Rs.31000/-,Upto 100W-Rs.45000/-, Upto 200W-Rs.72000/- (5% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Marking, IS 418)	-	500	5% discount for BIS
7.1(Lamp Dimensions, IS 418:2004)	-	7500	5% discount for BIS
7.2(Lamp Dimensions, IS 418:2004)	-	7500	5% discount for BIS
8.1(Wattage, IS 418)	-	5000	5% discount for BIS
8.2.1(Luminous Flux Initial, IS 418)	-	5000	5% discount for BIS
8.2.2(Luminous Flux Initial, IS 418)	-	5000	5% discount for BIS
9(Lumen Maintenance, IS 418)	-	15000	5% discount for BIS
10.1(Life Test Requirements, IS 418)	-	20000	5% discount for BIS
10.2(Life Test Requirements, IS 418)	-	20000	5% discount for BIS

Complete

19 Mar, 2026

-
-

9477

National Test House (NR)

IS 814 (2004)

Covered electrodes for manual metal arc welding of carbon and carbon manganese steel - Specification (Sixth Revision)

14500 View breakup
i) Grade EA, EC, ER, ERRXXXX-: Rs.14500/-(Single size), Rs.29000/- (Two size), Rs..36500/-(For three size), Rs.40000/- (Four size), , For physical Rs.11000/-, Radiography test Rs.1000/-, For chemical Rs.2500/- ii) for EB XXXXHJX grade per size Full test (EB XXXX grade): Rs.18000/-(for two size Rs.36000/- three size Rs.44500/- four size Rs.50000/-) , Diffusible hydrogen test-Rs.5000/-, Bend test-Rs.8000/-, Running performance test-Rs.2000/-, Increase mental recover test-Rs.3000/- , For physical Rs.13000/-, Radiography test-:Rs.1000/-, For chemical Rs.4000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6 & 8.2(Carbon- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	500	carbon content
6 & 8.2(Silicon- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	500	Silicon content
6 & 8.2(Phosphorous- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	500	Phosphorus content
6 & 8.2(Manganese- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	500	Manganese content
6 & 8.2(Sulphur- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	500	Sulphur content
7.1.1(Diameter of Core Wire)	-	500	Dimension
7.1.2(Length of Electrodes)	-	500	Dimension
7.2.1(Contact End)	-	500	Dimension
7.2.2(Arc striking End)	-	500	Dimension
7.3(Concentricity of Flux covering with core wire)	-	500	Dimension
7.4(Defects of Core wire and Coverings)	-	500	Dimension
9.1.2 Table 6 (Ultimate Tensile Strength-Annex F)	-	3000	Strength Parameter
9.1.2 Table 6 ( Yield Stress -Annex F)	-	1000	Strength Parameter
9.1.2 Table 6 (Percentage Elongation on Gauge Length-Annex F)	-	1000	Strength Parameter
9.1.3 Table 6 ( Impact Strength-Annex F)	-	3000	Strength Parameter
9.2(Butt Weld Bend Test-IS 1599)	-	3000	Strength Parameter
9.6(Radiographic Test- IS 1182)	-	1000	NDT Test
9.3(Running PerformanceTest-Annex H)	-	2000	Running Performance Test
9.4(Increased Metal Recovery Test-IS 13043)	-	3000	Increased Metal Recovery Test
9.5(Diffusible Hydrogen Evaluation Test-IS 11802)	-	5000	Diffusible Hydrogen Evaluation Test
6 & 8.2(Copper- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	500	-
6 & 8.2(Vanadium- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	500	-
6 & 8.2(Titanium- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	500	-
6 & 8.2(Alumiminium- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	500	-
6 & 8.2(Cr+Ni+Mo - Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	1000	-
6 & 8.2(Chromium- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	500	-
6 & 8.2(Nickel- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	500	-
6 & 8.2(Molybdenum- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	500	-
6 & 8.2(Mn+Ni+Cr+Mo+V - Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	2000	-

Complete

26 Oct, 2025

-
-

9478

NATIONAL TEST HOUSE(SOUTHERN REGION)

IS 814 (2004)

Covered electrodes for manual metal arc welding of carbon and carbon manganese steel - Specification (Sixth Revision)

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6 & 8.2(Carbon- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	4000	-
6 & 8.2(Silicon- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	0	All elements test charges included in carbon
6 & 8.2(Manganese- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	0	All elements test charges included in carbon
6 & 8.2(Phosphorous- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	0	All elements test charges included in carbon
6 & 8.2(Sulphur- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	0	All elements test charges included in carbon
6 & 8.2(Copper- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	0	All elements test charges included in carbon
6 & 8.2(Vanadium- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	0	All elements test charges included in carbon
6 & 8.2(Chromium- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	0	All elements test charges included in carbon
6 & 8.2(Nickel- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	0	All elements test charges included in carbon
6 & 8.2(Molybdenum- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	0	All elements test charges included in carbon
6 & 8.2(Mn+Ni+Cr+Mo+V - Relevant Parts of IS 228 or any other established instrumental/chemical method)	-	0	All elements test charges included in carbon
7.1.1(Diameter of Core Wire)	-	0	Included in Tensile Test charges
7.1.2(Length of Electrodes)	-	0	Included in Tensile Test charges
7.2.1(Contact End)	-	0	Included in Tensile Test charges
7.2.2(Arc striking End)	-	0	Included in Tensile Test charges
7.3(Concentricity of Flux covering with core wire)	-	0	Included in Tensile Test charges
7.4(Defects of Core wire and Coverings)	-	0	Included in Tensile Test charges
9.1.2 Table 6 (Ultimate Tensile Strength-Annex F)	-	0	13000
9.1.2 Table 6 ( Yield Stress -Annex F)	-	0	Included in Tensile Test charges
9.1.2 Table 6 (Percentage Elongation on Gauge Length-Annex F)	-	0	Included in Tensile Test charges
9.1.3 Table 6 ( Impact Strength-Annex F)	-	0	Included in Tensile Test charges
9.2(Butt Weld Bend Test-IS 1599)	-	8000	-
9.3(Running PerformanceTest-Annex H)	-	2000	-
9.4(Increased Metal Recovery Test-IS 13043)	-	3000	-
9.5(Diffusible Hydrogen Evaluation Test-IS 11802)	-	5000	-
9.6(Radiographic Test- IS 1182)	-	1000	-

Complete

28 Nov, 2025

-
-

9479

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING AND TECHNOLOGY (CIPET):CSTS-BHOPAL

IS 9271 (2004)

Unplasticized polyvinyl chloride (UPVC) single wall corrugated pipes for drainage - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

Complete

31 Dec, 2026

-
-

9480

CIPET, Jaipur

IS 9271 (2004)

Unplasticized polyvinyl chloride (UPVC) single wall corrugated pipes for drainage - Specification (First Revision)

All

7400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.2(Density-When tested in accordance with ]S 13360 (Part 3/Sec 1), the densi of the pipe shall be between 1.40 and 1.46 gm/cm3 .)	-	500	-
8.5(Elongation Test-(Annex C,)- pipes shall not elongate more than 7.5 percent)	-	1100	-
7.4.1(Perforation Requirement- There sh.all be maximum 8 rows of perforation)	-	500	-
5.1.1(MATERIAL-(Conform to IS 10151)-Up to 10 percent addition of the manufacturers own rework material produced during the manufacture and testing of pipes, complying With the standard IS pertmssible)	-	4100	VCM Content + K- Value ( 3000+1100)
7.4.2(Perforation Requirement-The maximum in flow area shall be 80 cm2/m length of pipe of all diameters)	-	500	-
7.4.3(Perforation Requirement-The heght of corrugation -The depth of corrugations shall be 3 percent, Min of nominal outside diameter (dn).)	-	500	-
5.1(MATERIAL-(Conform to IS 10151))	-	4100	VCM Content + K- Value ( 3000+1100)
5.1.2(MATERIAL)	-	0	declaration by manufacturer
5.1.3(MATERIAL- (Refer IS 4669))	-	1100	-
6(TYPES- perforated or non-perforated types.)	-	500	-
7, Table 1(DIMENSIONS AND TOLERANCE-The nominal outside diameter and tolerances of the corrugated pipes shall be as per Table 1)	-	500	-
7.2, 8(Wall Thickness)	-	250	-
7.3(Length)	-	250	-
7.4.1(Perforation Requirement-)	-	500	-
7.4.1,Table 2(Perforation Requirement-(Refer Table 2))	-	500	-
8.1.1(Visual Appearance, Workmanship and Finish)	-	300	-
8.1.2(Visual Appearance, Workmanship and Finish)	-	300	-
8.3,Table 3(Pipe stiffness-(Refer Annex A))	-	1100	-
8.4,Table 3(Impact Strength at 0 degree C- (refer Annex B))	-	1400	Testing charges + Specimen (1100+300)
8.6(BendIng Test-(Annex D,))	-	1000	-
8.7(Joints)	-	1000	-

Complete

21 Feb, 2026

-
-

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number

No Record Found

No Record Found

No Record Found

No Record Found

No Record Found