BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15628 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

9331

Samridhi Test House Pvt. Ltd.

8184706

IS 2925 (1984)

Specification for industrial safety helmets (Second Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Shell)	-	500	-
3.2(Harness)	-	200	-
3.3(Metal Parts)	-	2000	-
4.1(Sizes)	-	500	-
5.1(Shell)	-	100	-
5.2(Harness)	-	1000	-
5.3(Chin Strap or Nape Strap)	-	2000	-
5.4(Lamp Bracket)	-	1000	-
5.5(Cable Clip)	-	1000	-
6.1(Workmanship & Finish)	-	100	-
7.1(Mass)	-	500	-
8.1(Shock Absorption Resistance)	-	1000	-
8.2(Penetration Resistance)	-	1000	-
8.3(Flamability Resistance)	-	1000	-
8.4(Electrical Resistance)	-	1000	-
8.5(Water Absorption)	-	1000	-
8.6(Heat Resistance)	-	1000	-
3.1(Shell)	-	0	Repeated Test
3.2(Harness)	-	0	Repeated Test
3.3(Metal Parts)	-	0	Repeated Test
4.1(Sizes)	-	0	Repeated Test
5.1(Shell)	-	0	Repeated Test
5.2(Harness)	-	0	Repeated Test
5.3(Chin Strap or Nape Strap)	-	0	Repeated Test
5.4(Lamp Bracket)	-	0	Repeated Test
5.5(Cable Clip)	-	0	Repeated Test
6.1(Workmanship & Finish)	-	0	Repeated Test
7.1(Mass)	-	0	Repeated Test
8.1(Shock Absorption Resistance)	-	0	Repeated Test
8.2(Penetration Resistance)	-	0	Repeated Test
8.3(Flamability Resistance)	-	0	Repeated Test
8.4(Electrical Resistance)	-	0	Repeated Test
8.5(Water Absorption)	-	0	Repeated Test
8.6(Heat Resistance)	-	0	Repeated Test
5.2.1(Head Band)	-	1000	-
5.3.1(Chin Strap)	-	1000	-
5.3.2(Nape Strap)	-	1000	-

08 Apr, 2028

-
-

9332

URS PRODUCTS AND TESTING PVT. LTD. (A29), NOIDA

8168906

IS 915 (2012)

Laboratory glassware - One - Mark volumetric flasks (Third Revision)

13500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1(Material)	-	13500	-
Table 1(Nominal Capacity)	-	13500	-
Table 1(Internal Neck Diameter)	-	13500	-
Table 1(Distance of graduation line)	-	13500	-
Table 1(Overall Height)	-	13500	-
Table 1(Bulb Diameter)	-	13500	-
Table 1(Base Diameter)	-	13500	-
Table 1(Wall Thickness)	-	13500	-
Table 1(Ground joint k4)	-	13500	-
Table 1(Ground joint k6)	-	13500	-
8.3(Shape)	-	13500	-
8.4(Neck)	-	13500	-
8.5(Stopper)	-	13500	-
8.6(Dimensions)	-	13500	-
9.0(Graduation Line)	-	13500	-
Table-2(Nominal capacity)	-	13500	-
Table-2(Internal neck diameter)	-	13500	-
Table-2(Distance of graduation line 1))	-	13500	-
Table-2(Overall height 2))	-	13500	-
Table-2(Bulb diameter)	-	13500	-
Table-2(Base diameter)	-	13500	-
Table-2(Wall thickness)	-	13500	-
Table-2(Ground joint 3) k4)	-	13500	-
Table-2(Ground joint 3) k6)	-	13500	-
12.1(Visibility of graduation line, figures and marking)	-	13500	-
12.2(Visibility of graduation line, figures and marking)	-	13500	-
Clause. 7.0(Accuracy)	-	13500	-

26 Sep, 2027

-
included w.e.f.05.11.2024

9333

IDMA LABORATORIES LIMITED, PANCHKULA

9123236

IS 209 (2024)

Refined Zinc - Specification (Fifth Revision)

13000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 7.1, Cl 7.2 & Table 1(Chemical Composition (Zinc))	-	1500	-
Cl 7.1, Cl 7.2 & Table 1(Chemical Composition (Lead))	-	1500	-
Cl 7.1, Cl 7.2 & Table 1(Chemical Composition (Iron))	-	1500	-
Cl 7.1, Cl 7.2 & Table 1(Chemical Composition (Cadmium))	-	1500	-
Cl 7.1, Cl 7.2 & Table 1(Chemical Composition (Aluminium))	-	1500	-
Cl 7.1, Cl 7.2 & Table 1(Chemical Composition (Copper))	-	1500	-
Cl 7.1, Cl 7.2 & Table 1(Chemical Composition (Tin))	-	1500	-
Cl 7.1, Cl 7.2 & Table 1(Chemical Composition (Total of All Impurities))	-	1500	-
Cl 9.1(Freedom from Defect)	-	1000	-

31 Dec, 2029

-
Included w.e.f.10.12.2024

9334

CSIR-CECRI, CSIR-Battery Performance Testing & Evalauation Centre, Karaikudi

6162524

IS 16270 (2023)

Secondary cells and batteries for solar photovoltaic application - General requirements and methods of test

417600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-8.1(Capacity Test)	-	30000	-
Cl-8.2(Endurance Test)	-	182860	-
Cl-8.3(Charge Retention Test)	-	29880	-
Cl-8.4(Cycle Endurance in Photovoltaic Application (Extreme Conditions))	-	132340	-
Cl-8.5(Sulphation Test (Applicable for Lead Acid Batteries only))	-	6800	-
Cl-8.6(Water Loss Test (Valid for Flooded Lead Acid Batteries only))	-	35720	-
Cl-8.1(Capacity Test)	-	30000	-
Cl-8.2(Endurance Test)	-	182860	-
Cl-8.3(Charge Retention Test)	-	29880	-
Cl-8.4(Cycle Endurance in Photovoltaic Application (Extreme Conditions))	-	132340	-
Cl-8.5(Sulphation Test (Applicable for Lead Acid Batteries only))	-	6800	-
Cl-8.6(Water Loss Test (Valid for Flooded Lead Acid Batteries only))	-	35720	-
Cl-8.1(Capacity Test)	-	30000	-
Cl-8.2(Endurance Test)	-	182860	-
Cl-8.3(Charge Retention Test)	-	29880	-
Cl-8.4(Cycle Endurance in Photovoltaic Application (Extreme Conditions))	-	132340	-
Cl-8.5(Sulphation Test (Applicable for Lead Acid Batteries only))	-	6800	-
Cl-8.6(Water Loss Test (Valid for Flooded Lead Acid Batteries only))	-	35720	-
4.3.7.1(Specific gravity)	-	0	-
Cl-5.4(Marking)	-	0	-

24 Sep, 2027

-
included w.e.f.17.10.2024

9335

CIPET, Madurai

6139834

IS 11584 (1986)

Specification for high density polyethylene (Hdpe) crates for milk satchets

HDPE Crates

7838 View breakup
For Others: Rs.10050/- (For BIS: Rs.6638/-)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.2(Material )	-	2000	25% Discount for BIS
2.3(Shape and Dimensions)	-	500	25% Discount for BIS
2.4(Mass )	-	300	25% Discount for BIS
2.5(Appearance and Surface Finish)	-	300	25% Discount for BIS
2.6(Colour Fastness)	-	300	25% Discount for BIS
2.7(Resistance to Stress)	-	1000	25% Discount for BIS
2.8(Resistance to Applied Load)	-	1100	25% Discount for BIS
2.9(Strength)	-	1100	1200 Specimen conditioning charges 25% Discount for BIS only on testing charges
2.1(Dimensional Stability)	-	900	25% Discount for BIS

22 May, 2027

-
Included w.e.f. 17-02-2021

9336

CIPET, Madurai

6139834

IS 12786 (1989)

Irrigation equipment - Polyethylene pipes for irrigation laterals - Specification

7431 View breakup
For Others: Rs.9175/- Rs.6075/- For raw material (optional) For BIS: Rs.7431/- Rs.5181/- For raw material (optional)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.a (Potyethylene - higher olefins constituent )	-	1050	25 % Discount for BIS on Testing charge
4.1.b(Potyethylene - anti-oxidant)	-	2000	25 % Discount for BIS on Testing charge
4.1.c.i (Density)	-	500	Rs 625 Sample Preparation charge 25 % Discount for BIS on Testing charge
4.1.c.ii (Toluene extract - Annex A)	-	1100	25 % Discount for BIS on Testing charge
4.1.c.iii (Volatile matter - Annex B )	-	700	25 % Discount for BIS on Testing charge
4.1.c & 4.2.a (Carbon Black content - IS 2530 : 1963)	-	925	25 % Discount for BIS on Testing charge
4.2.b (The dispersion of Carbon Black content shall be satisfactory - IS 2530 : 1963)	-	700	25 % Discount for BIS on Testing charge
7.3(Tensile Test)	-	1100	Rs 300 Sample Preparation charge 25 % Discount for BIS on Testing charge
7.4(SusceptibiIity to Environmental Stress Cracking)	-	1200	25 % Discount for BIS on Testing charge
7.3(Elongation at Break)	-	0	With Tensile strength
5 and Table 1(DIMENSIONS OF PIPES - outside diameters)	-	250	25 % Discount for BIS on Testing charge
5 and Table 1(DIMENSIONS OF PIPES - wall thickness shall)	-	0	Rs 300 Inclusive of all dimension
7.2(Reversion Test)	-	1100	Rs 250 Sample Preparation charge 25 % Discount for BIS on Testing charge

22 May, 2027

-
Included w.e.f. 17-02-2021

9337

CIPET, Madurai

6139834

IS 10889 (2004)

High density polyethylene films (First Revision)

5756 View breakup
For Others: Rs.7675/- Rs.3,225/- For raw material (optional) For BIS: Rs.5756/- Rs.3,044/- For raw material (optional)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Materials)	-	1050	25 % Discount on Testing Charges for BIS
5.2(Black Compound)	-	3850	25 % Discount on Testing Charges for BIS
6.1.1(Appearance)	-	300	25 % Discount on Testing Charges for BIS
6.1.5(Melt Flow Rate)	-	1100	25 % Discount on Testing Charges for BIS
6.2.1, Table 1(Nominal Thickness)	-	250	25 % Discount on Testing Charges for BIS
6.2.2, Table 2(Nominal Width)	-	250	25 % Discount on Testing Charges for BIS
6.4.1(Tensile Strength at Break)	-	2200	1100 for Machine Direction 1100 for Transverse Direction 25 % Discount on Testing Charges for BIS
6.4.2(Elongation at Break)	-	0	As per 6.4.1
6.4.3(Impact Resistance (Falling Dart))	-	850	25 % Discount on Testing Charges for BIS
6.4.3, Table 6(Average Thickness of Film)	-	250	25 % Discount on Testing Charges for BIS

22 May, 2027

-
Included w.e.f. 17-02-2021

9338

CIPET, Madurai

6139834

IS 11805 (2007)

Polyethylene pouches for packaging liquid milk - Specification - (Second Revision)

7988 View breakup
For Others: Rs.6650/- Rs.2750/- For raw material (optional) For BIS: Rs.4988/- Rs.2063/- For raw material (optional)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Material)	-	1050	25% Dicount for BIS
5.1(Visual)	-	250	25% Dicount for BIS
5.2(Film form)	-	250	25% Dicount for BIS
5.3(winding)	-	250	25% Dicount for BIS
5.4(Odour)	-	250	25% Dicount for BIS
5.5(Thickness)	-	250	25% Dicount for BIS
5.6(Width)	-	250	25% Dicount for BIS
5.7(Tensile Strength)	-	1300	25% Dicount for BIS
5.8(Elongation at Break)	-	1300	25% Dicount for BIS
5.9(Dart Impact Resistance)	-	850	25% Dicount for BIS
5.10(Slip)	-	850	25% Dicount for BIS
8.1(Leak test)	-	400	25% Dicount for BIS
8.2(Drop test)	-	1100	25% Dicount for BIS
8.3(Printing Requirements)	-	500	25% Dicount for BIS
9.1(General requirements)	-	250	25% Dicount for BIS
9.2(Product Specific Requirements)	-	250	25% Dicount for BIS
10(Marking)	-	250	25% Dicount for BIS

22 May, 2027

-
Included w.e.f. 17-02-2021

9339

CIPET, Madurai

6139834

IS 4984 (2016)

Polyethylene pipes for water supply - Specification (Fifth Revision)

41325 View breakup
For Others: Rs.41,325/- (For BIS: Rs.31,306/-)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.10(Slow Crack Growth Rate)	-	5500	Sample Preparation Charges -500 ( Butt Welded sample to be submitted ) 25% Discount on the testing charges only
8.9 table-6(Elongation at Break)	-	1100	Sample Preparation Charges -500 25% Discount on the testing charges only
8.8(Tensile Strength for Butt-fusion)	-	1100	Sample Preparation Charges -500 25% Discount on the testing charges only
8.7(Density)	-	500	25% Discount on the testing charges only
8.5 (Oxidation Induction Time)	-	2200	25% Discount on the testing charges only
8.4( Melt Flow Rate)	-	1100	25% Discount on the testing charges only
8.2(Longitudinal Reversion Test)	-	700	Sample Preparation Charges - 200 25% Discount on the testing charges only
8,/8.1/8.1.1 table-5(PERFORMANCE REQUIREMENTS / Hydraulic Characteristics/ Internal Pressure Creep Rupture Test of Pipe)	-	17400	Acceptance Test - Rs 1600 Type Test (165Hrs)- 4800 Type Test (1000Hrs) -11000 Sample Preparation Charge - 250 25% Discount on the testing charges only
8.1.2 table -5(Internal Pressure Creep Rupture Test of Pipe Joints)	-	1600	25% Discount on the testing charges only
7.4.1.2(Ovality)	-	0	25% Discount on the testing charges only
Cl-7.4(Mean Outside Diameter (For upto 50 mm take 8 reading, above 50mm take 6 reading & average will be reported))	-	750	For all dimensions measurement test charges would be - 700 25% Discount on the testing charges only
7.2(Length)	-	250	25% Discount on the testing charges only
6.2.1(6.1.1 Identification Stripes)	-	250	25% Discount on the testing charges only
6.2(Colour)	-	250	25% Discount on the testing charges only
8.6(Overall migration)	-	1700	Sample Preparation Charges - 300 25% Discount on the testing charges only
8.3(Carbon black)	-	1625	Carbon Black Content- 925 Carbon Black Dispersion - 700 25% Discount on the testing charges only
5, 5.1 table-1(MATERIALS)	-	4025	Sample Preparation Charge -625 25% Discount on the testing charges only
5.3(e)(Carbon Black Master Batch)	-	925	25% Discount on the testing charges only

22 May, 2027

-
Diameter 16mm to 200mm.

9340

CIPET, Madurai

6139834

IS 11652 (2017)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg cement – Specification (third revision)

woven sacks for packaging of 50 kg cement

7913 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	250	25% Discount for testing charge
Fig. 1- Table 1- Sr. no. ii (Ends per dm - Annex B 40 ± 2 )	-	250	25% Discount for testing charge
Fig. 1- Table 1-Sr. no. iii (Picks per dm-Annex B 40 ± 2 )	-	250	25% Discount for testing charge
4.2 (Fabric)	-	1050	25% Discount for testing charge
4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used in the fabric.)	-	1050	25% Discount for testing charge
4.4(Seam )	-	250	25% Discount for testing charge
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	400	25% Discount for testing charge
4.2 (The woven fabric shall be of weight, 79 g/m2 )	-	300	25% Discount for testing charge
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	1100	25% Discount for testing charge
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	1100	25% Discount for testing charge
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	1100	25% Discount for testing charge
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	1100	25% Discount for testing charge

22 May, 2027

-
For finished product only

9341

CIPET, Madurai

6139834

IS 7834 : Part 2 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 2 Specific requirements for 45 degrees elbows

16-315 mm

7388 View breakup
For Others: Rs.5625/- Rs.4100 /- for PVC resin (OPTIONAL) For BIS: Rs.4219/- Rs.3075 /- for PVC resin (OPTIONAL)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
table 1 sl.no: 01(16 )	-	500	25% Discount for BIS (All Dimensions)
table 1 sl.no: 02(20 )	-	500	25% Discount for BIS (All Dimensions)
table 1 sl.no: 03(25 )	-	500	25% Discount for BIS (All Dimensions)
table 1 sl.no: 04(32 )	-	500	25% Discount for BIS (All Dimensions)
table 1 sl.no: 05(40 )	-	500	25% Discount for BIS (All Dimensions)
table 1 sl.no: 06(50 )	-	500	25% Discount for BIS (All Dimensions)
table 1 sl.no: 07(63 )	-	500	25% Discount for BIS (All Dimensions)
table 1 sl.no: 08(75 )	-	500	25% Discount for BIS (All Dimensions)
table 1 sl.no: 09(90 )	-	500	25% Discount for BIS (All Dimensions)
table 1 sl.no: 10(110 )	-	500	25% Discount for BIS (All Dimensions)
table 1 sl.no: 11(125 )	-	500	25% Discount for BIS (All Dimensions)
table 1 sl.no: 12(140 )	-	500	25% Discount for BIS (All Dimensions)
table 1 sl.no: 13(160 )	-	500	25% Discount for BIS (All Dimensions)
table 1 sl.no: 14( 180 )	-	500	25% Discount for BIS (All Dimensions)
table 1 sl.no: 15(200 )	-	500	25% Discount for BIS (All Dimensions)
table 1 sl.no: 16(225 )	-	500	25% Discount for BIS (All Dimensions)
table 1 sl.no: 17(250.0)	-	500	25% Discount for BIS (All Dimensions)
table 1 sl.no: 18(280.0)	-	500	25% Discount for BIS (All Dimensions)
table 1 sl.no: 19(315.0)	-	500	25% Discount for BIS (All Dimensions)
2.1(General)	-	500	25% Discount for BIS
2.2(Manufacture)	-	500	25% Discount for BIS
2.2.2, Table 1(Size)	-	500	25% Discount for BIS (All Dimension)
2.2.2, Table 1(45 ̊ Elbow Laying Length)	-	500	25% Discount for BIS (All Dimension)
2.2.3( inside diameter of the socket)	-	500	25% Discount for BIS (All Dimension)
2.2.3(socket length)	-	500	25% Discount for BIS (All Dimension)
6.4 PART-1(Short term hydraulic test)	-	850	25% Discount for BIS (All Dimension)
6.1.1(VCM Content Test)	-	3000	25% Discount for BIS (All Dimension)
2.2.2 table 1(Laying Length)	-	500	25% Discount for BIS (All Dimension)

22 May, 2027

-
Up to 200 ND only The following tests are Sub Contracted to other NABL accredited CIPET Labs as given below. 1. Effect on Water - M/s CIPET, Chennai, M/s CIPET, Bhopal, M/s CIPET, Jaipur Testing charges has been fixed for a period of two years w.e.f. 28.01.2019 i.e. up to 27.01.2021.

9342

CIPET, Madurai

6139834

IS 7834 : Part 4 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 4 Specific requirements for 90 degree tees

16-315 mm

7388 View breakup
For Others: Rs.5625/- Rs.4100 /- for PVC resin (OPTIONAL) For BIS: Rs.4219/- Rs.3075 /- for PVC resin (OPTIONAL)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
table 1 sl.no: 01(16 )	-	500	25% Discount for BIS (All Dimension)
table 1 sl.no: 02(20 )	-	500	25% Discount for BIS (All Dimension)
table 1 sl.no: 03(25 )	-	500	25% Discount for BIS (All Dimension)
table 1 sl.no: 04(32 )	-	500	25% Discount for BIS (All Dimension)
table 1 sl.no: 05(40 )	-	500	25% Discount for BIS (All Dimension)
table 1 sl.no: 06(50 )	-	500	25% Discount for BIS (All Dimension)
table 1 sl.no: 07(63 )	-	500	25% Discount for BIS (All Dimension)
table 1 sl.no: 08(75 )	-	500	25% Discount for BIS (All Dimension)
table 1 sl.no: 09(90 )	-	500	25% Discount for BIS (All Dimension)
table 1 sl.no: 10(110 )	-	500	25% Discount for BIS (All Dimension)
table 1 sl.no: 11(125 )	-	500	25% Discount for BIS (All Dimension)
table 1 sl.no: 12(140 )	-	500	25% Discount for BIS (All Dimension)
table 1 sl.no: 13(160 )	-	500	25% Discount for BIS (All Dimension)
table 1 sl.no: 14( 180 )	-	500	25% Discount for BIS (All Dimension)
table 1 sl.no: 15(200 )	-	500	25% Discount for BIS (All Dimension)
table 1 sl.no: 16(225 )	-	500	25% Discount for BIS (All Dimension)
table 1 sl.no: 17(250.0)	-	500	25% Discount for BIS (All Dimension)
table 1 sl.no: 18(280.0)	-	500	25% Discount for BIS (All Dimension)
table 1 sl.no: 19(315.0)	-	500	25% Discount for BIS (All Dimension)
2.1(General)	-	500	25% Discount for BIS (All Dimension)
2.2(Manufacture)	-	500	25% Discount for BIS (All Dimension)
2.2.2, Table 1(Size)	-	500	25% Discount for BIS (All Dimension)
2.2.2, Table 1(90 ̊ Elbow Laying Length)	-	500	25% Discount for BIS (All Dimension)
2.2.3( inside diameter of the socket)	-	500	25% Discount for BIS (All Dimension)
2.2.3(Socket length)	-	500	25% Discount for BIS (All Dimension)
6.1.1(VCM Content Test)	-	300	25% Discount for BIS
2.2.2 table 1(Laying length)	-	500	25% Discount for BIS (All Dimension)

22 May, 2027

9343

CIPET, Madurai

6139834

IS 7834 : Part 5 (1987)

Injection Moulded PVC Socket Fittings With Solvent Cement Joints for Water Supplies - Part 5 : Specific Requirements for 45 degree Tees

16-315 mm

7388 View breakup
For Others: Rs.5625/- Rs.4100 /- for PVC resin (OPTIONAL) For BIS: Rs.4219/- Rs.3075 /- for PVC resin (OPTIONAL)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
table 1 sl.no: 01(16 (Z) )	-	500	All Dimensions (25% Discount for BIS)
table 1 sl.no: 02(20 (Z) )	-	500	All Dimensions (25% Discount for BIS)
table 1 sl.no: 03(25 (Z) )	-	500	All Dimensions (25% Discount for BIS)
table 1 sl.no: 04(32 (Z) )	-	500	All Dimensions (25% Discount for BIS)
table 1 sl.no: 05(40 (Z) )	-	500	All Dimensions (25% Discount for BIS)
table 1 sl.no: 06(50 (Z) )	-	500	All Dimensions (25% Discount for BIS)
table 1 sl.no: 07(63 (Z) )	-	500	All Dimensions (25% Discount for BIS)
table 1 sl.no: 08(75 (Z) )	-	500	All Dimensions (25% Discount for BIS)
table 1 sl.no: 09(90 (Z) )	-	500	All Dimensions (25% Discount for BIS)
table 1 sl.no: 10(110 (Z) )	-	500	All Dimensions (25% Discount for BIS)
table 1 sl.no: 11(125 (Z) )	-	500	All Dimensions (25% Discount for BIS)
table 1 sl.no: 12(140 (Z) )	-	500	All Dimensions (25% Discount for BIS)
table 1 sl.no: 13(160(z))	-	500	All Dimensions (25% Discount for BIS)
2.1(General)	-	500	All Dimensions (25% Discount for BIS)
2.2(Manufacture)	-	500	All Dimensions (25% Discount for BIS)
2.2.2, Table 1(Size)	-	500	All Dimensions (25% Discount for BIS)
2.2.2, Table 1(45 ̊ Tees Laying Length, Z)	-	500	All Dimensions (25% Discount for BIS)
2.2.3( inside diameter of the socket)	-	500	All Dimensions (25% Discount for BIS)
2.2.3(Socket length)	-	500	All Dimensions (25% Discount for BIS)
6.1.1(VCM Content Test)	-	3000	(25% Discount for BIS)
2.2.2 table 1(Laying length)	-	500	All Dimensions (25% Discount for BIS)

22 May, 2027

9344

CIPET, Madurai

6139834

IS 7834 : Part 6 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 6 Specific requirements for sockets

16-315

7388 View breakup
For Others: Rs.5625/- Rs.4100 /- for PVC resin (OPTIONAL) For BIS: Rs.4219/- Rs.3075 /- for PVC resin (OPTIONAL)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
table 1 sl.no: 01(16 )	-	500	All Dimension (25% Discount for BIS)
table 1 sl.no: 02(20 )	-	500	All Dimension (25% Discount for BIS)
table 1 sl.no: 03(25 )	-	500	All Dimension (25% Discount for BIS)
table 1 sl.no: 04(32 )	-	500	All Dimension (25% Discount for BIS)
table 1 sl.no: 05(40 )	-	500	All Dimension (25% Discount for BIS)
table 1 sl.no: 06(50 )	-	500	All Dimension (25% Discount for BIS)
table 1 sl.no: 07(63 )	-	500	All Dimension (25% Discount for BIS)
table 1 sl.no: 08(75 )	-	500	All Dimension (25% Discount for BIS)
table 1 sl.no: 09(90 )	-	500	All Dimension (25% Discount for BIS)
table 1 sl.no: 10(110 )	-	500	All Dimension (25% Discount for BIS)
table 1 sl.no: 11(125 )	-	500	All Dimension (25% Discount for BIS)
table 1 sl.no: 12(140 )	-	500	All Dimension (25% Discount for BIS)
table 1 sl.no: 13(160 )	-	500	All Dimension (25% Discount for BIS)
table 1 sl.no: 14( 180 )	-	500	All Dimension (25% Discount for BIS)
table 1 sl.no: 15(200 )	-	500	All Dimension (25% Discount for BIS)
table 1 sl.no: 16(225 )	-	500	All Dimension (25% Discount for BIS)
table 1 sl.no: 17(250.0)	-	500	All Dimension (25% Discount for BIS)
table 1 sl.no: 18(280.0)	-	500	All Dimension (25% Discount for BIS)
table 1 sl.no: 19(315.0)	-	500	All Dimension (25% Discount for BIS)
2.1(General)	-	250	25% Discount for BIS
2.2(Manufacture)	-	250	25% Discount for BIS
2.2.2, Table 1(Size)	-	500	All Dimension (25% Discount for BIS)
2.2.2, Table 1(Socket Laying Length)	-	500	All Dimension (25% Discount for BIS)
2.2.3( inside diameter of the socket)	-	500	All Dimension (25% Discount for BIS)
2.2.3(Socket length)	-	500	All Dimension (25% Discount for BIS)
6.1.1(VCM Content Test)	-	3000	25% Discount for BIS
2.2.2 table 1(Laying length)	-	500	(25% Discount for BIS)

22 May, 2027

-
Up to 200 ND only

9345

CIPET, Madurai

6139834

IS 7834 : Part 7 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 7 Specific requirements for unions

Unions

7388 View breakup
For Others: Rs.5625/- Rs.4100 /- for PVC resin (OPTIONAL) For BIS: Rs.4219/- Rs.3075 /- for PVC resin (OPTIONAL)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
table 1 sl.no: 01(16 )	-	500	All Dimension (25% Discount for BIS)
table 1 sl.no: 02(20 )	-	500	All Dimension (25% Discount for BIS)
table 1 sl.no: 03(25 )	-	500	All Dimension (25% Discount for BIS)
table 1 sl.no: 04(32 )	-	500	All Dimension (25% Discount for BIS)
table 1 sl.no: 05(40 )	-	500	All Dimension (25% Discount for BIS)
table 1 sl.no: 06(50 )	-	500	All Dimension (25% Discount for BIS)
table 1 sl.no: 07(63 )	-	500	All Dimension (25% Discount for BIS)
2.1(General)	-	250	All Dimension (25% Discount for BIS)
2.2(Manufacture)	-	250	All Dimension (25% Discount for BIS)
2.2.2, Table 1(Size)	-	500	All Dimension (25% Discount for BIS)
2.2.2, Table 1(Union Laying Length)	-	500	All Dimension (25% Discount for BIS)
2.2.3( inside diameter of the socket)	-	500	All Dimension (25% Discount for BIS)
2.2.3(Socket length)	-	500	All Dimension (25% Discount for BIS)
6.1.1(VCM Content Test)	-	500	All Dimension (25% Discount for BIS)
2.2.2 table 1(Laying length)	-	500	All Dimension (25% Discount for BIS)

22 May, 2027

-
Up to 200 ND only

9346

CIPET, Madurai

6139834

IS 7834 : Part 8 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 8 Specific requirements for caps

4219 View breakup
For Others: Rs.5625/- Rs.4100 /- for PVC resin (OPTIONAL) For BIS: Rs.4219/- Rs.3075 /- for PVC resin (OPTIONAL)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.1(General)	-	700	25% Discount on Test Charges
2.1(General)	-	575	25% Discount on Test Charges
2.2.2(diameter of the socket of cap)	-	250	25% Discount on Test Charges
2.2(Manufacture)	-	250	25% Discount on Test Charges

22 May, 2027

-
Up to 200 ND only

9347

CIPET, Madurai

6139834

IS 9755 (2016)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packing fertilizers – Specification (fifth revision)

Type -I and II

20605 View breakup
For Others: Rs.24,080/- (For BIS: Rs.20605/-)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.6(Bottom Seam-The number of stitches/dm shall be 14 ± 2.)	-	300	25% Discount on Testing Charge
3.4(Liner-The thickness(A-2 of IS 2508) shall be 40 μm ± 10 percent in case of HMHDPE/ HDPE.)	-	250	Material Identification will be charged separately 25% Discount on Testing Charge
3.5(Bottom Seam-The two rows of stitches shall be separated from each other by minimum 5 mm)	-	250	Material Identification will be charged separately 25% Discount on Testing Charge
3.4.2(Liner-The bottom seal of the loose liner shall be at least 25 mm from the bottom edge.)	-	250	25% Discount on Testing Charge
3.1(MANUFACTURE-Raw Material- IS 10146 or IS 10910)	-	1050	25% Discount on Testing Charge
3.3(Sacks)	-	300	25% Discount on Testing Charge
4.1 , Table 1(REQUIREMENTS)	-	500	Ends per dm - 250, Picks Per dm 250 25% Discount on Testing Charge
4.3(Mass-(Annexure E))	-	250	25% Discount on Testing Charge
4.2(UV Resistance-The HDPE/PP woven fabric of sack made out of UV stabilized material shall have at least 50 percent of the original breaking strength when tested after the same has been exposed to UV radiation and weathering as per the method given in Annex D.)	-	2200	Specimen Conditioning charge ( UV -192 Hrs) 10180 25% Discount on Testing Charge
3.4(Liner-The thickness(A-2 of IS 2508) shall be 70 μm ± 10 percent in case of LDPE/LLDPE)	-	250	25% Discount on Testing Charge
3.6(Bottom Seam-the outer stitch shall be minimum 8 mm from the outer edge of the sacks.)	-	250	25% Discount on Testing Charge
3.3.1(Sacks-Table 1)	-	1050	25% Discount on Testing Charge
3.4(Liner)	-	250	25% Discount on Testing Charge
3.4.2(Lamination)	-	500	25% Discount on Testing Charge
3.4(Liner-The width of the loose liner shall be minimum 20 mm more than the width of the sack.)	-	250	25% Discount on Testing Charge
3.5(Bottom Seam-(see IS 10789).)	-	1050	25% Discount on Testing Charge
3.7(Mouth of the Sack)	-	250	25% Discount on Testing Charge
3.8(Capacity- The sack shall have the nominal capacity of 50 kg.)	-	500	25% Discount on Testing Charge

22 May, 2027

-
Testing charges has been fixed for a period of two years w.e.f. 28.01.2019 i.e. up to 27.01.2021.

9348

CIPET, Madurai

6139834

IS 16208 (2015)

Textiles - High density polyethylene (HDPE)/polypropylene (PP) woven sacks for packaging 10 kg, 15 kg, 20 kg, 25 kg and 30 kg foodgrains - Specification

Type I to V

18618 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Raw Material)	-	1050	25% Discount on testing charge
4.2(Tapes – Width IS 6192 and IS 11197)	-	250	25% Discount on testing charge
4.2(Construction)	-	250	25% Discount on testing charge
4.3(Sacks)	-	0	25% Discount on testing charge
4.4 and Table 1 i(Capacity)	-	250	25% Discount on testing charge
5.2 and Table 1 ii a(Dimensions Inside Length)	-	250	25% Discount on testing charge
5.2 and Table 1 ii b(Dimensions Inside Width)	-	250	25% Discount on testing charge
5.2 and Table 1 iii(Ends per dm )	-	250	25% Discount on testing charge
5.2 and Table 1 iv(Picks per dm )	-	250	25% Discount on testing charge
5.1 and Table 1 v(Mass of sack )	-	250	25% Discount on testing charge
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise )	-	1100	25% Discount on testing charge
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise )	-	1100	25% Discount on testing charge
5.2 and Table 1 vi(Breaking strength of bottom seam )	-	1100	25% Discount on testing charge
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise)	-	1100	25% Discount on testing charge
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise )	-	1100	25% Discount on testing charge
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	2200	10180 Specimen Conditioning charge Lengthwise and Width wise is included 25% Discount on testing charge
5.2 and Table 1 x(Ash content )	-	950	25% Discount on testing charge
4.2(Tapes – Linear Density )	-	500	25% Discount on testing charge
4.3.1(Bottom Seam)	-	1100	25% Discount on testing charge
4.3.1( The two rows of stitches shall be separated from each other)	-	500	25% Discount on testing charge
4.3.1( The outer stitch)	-	500	25% Discount on testing charge
4.3.1( The stitching shall be done with double fold over seam to a depth )	-	500	25% Discount on testing charge
4.3.1(Stitches pass through a minimum of six layers of the fabric. )	-	500	25% Discount on testing charge
4.3.1(The number of stitches/dm)	-	500	25% Discount on testing charge
4.3.2(Mouth)	-	250	25% Discount on testing charge

22 May, 2027

-
For finished product only

9349

CIPET, Madurai

6139834

IS 14887 (2014)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg food grains – Specification (first revision)

17080 View breakup
For Others Rs.19380/- (For BIS: Rs.17080/-)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2(Tapes – Width and Thickness ( IS 6192/IS 11197))	-	250	25% Discount on Testing Charge
3.3.1(Bottom seam (IS 10789))	-	250	25% Discount on Testing Charge
4.2 and Table 1 ii(Dimensions )	-	250	25% Discount on Testing Charge
5.2 and Table 1 iii(Ends per dm )	-	200	25% Discount on Testing Charge
5.2 and Table 1 iv(Picks per dm )	-	200	25% Discount on Testing Charge
4.2 and Table 1 v(Mass of sack )	-	300	25% Discount on Testing Charge
4.2 and Table 1 vi(Average breaking strength of fabric )	-	1100	Lengthwise and Width Wise will separately charged 25% Discount on Testing Charge
4.2 and Table 1 vi(Breaking strength of bottom seam )	-	1100	25% Discount on Testing Charge
4.2 and Table 1 viii(Elongation at break of fabric )	-	1100	25% Discount on Testing Charge
4.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	2200	10180 Specimen Conditioning charge towards UV exposure for 192 Hrs 25% Discount on Testing Charge
4.2 and Table 1 x(Ash content )	-	950	25% Discount on Testing Charge
3.2(Tapes – Linear Density (IS 6192/IS 11197))	-	700	25% Discount on Testing Charge
3.2(Tapes – Tenacity (IS 6192/IS 11197))	-	1100	25% Discount on Testing Charge
3.2(Tapes – Elongation at point of rupture (IS 6192/IS 11197))	-	1100	25% Discount on Testing Charge
3.2(Tapes – Heat Shrinkage (HDPE) (Cl. 3.2 and IS 6192))	-	700	25% Discount on Testing Charge
3.2(Tapes – Colour Fastness for pigmented tapes (IS 6192/IS 11197))	-	1100	25% Discount on Testing Charge
3.2(Tapes – Dimensional stability (PP) (IS 11197))	-	700	25% Discount on Testing Charge
3.2(Unlaminated Fabric Mass )	-	500	25% Discount on Testing Charge

22 May, 2027

-
For Finished product only

9350

CIPET, Madurai

6139834

IS 14968 (2015)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packing 50 Kg/25 kg sugar – Specification (first revision)

TYPE 1 & 2

18993 View breakup
For Others Rs.19630/- (For BIS: Rs.17268/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(TYPES)	-	300	25% Discount on Testing Charge
4.1(Raw Material)	-	1050	25% Discount on Testing Charge
4.2(Tapes – Width IS 6192 and IS 11197)	-	250	25% Discount on Testing Charge
4.2(Construction)	-	250	25% Discount on Testing Charge
4.3.1(Bottom Seam)	-	250	25% Discount on Testing Charge
4.5 and Table 1 i(Capacity)	-	250	25% Discount on Testing Charge
5.2 and Table 1 ii a(Dimensions Inside Length)	-	250	25% Discount on Testing Charge
5.2 and Table 1 iii(Ends per dm )	-	200	25% Discount on Testing Charge
5.2 and Table 1 iv(Picks per dm )	-	200	25% Discount on Testing Charge
5.1 and Table 1 v a(Mass of unlaminated sack IS 1964)	-	250	25% Discount on Testing Charge
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise IS 1969 (Part 1))	-	1100	25% Discount on Testing Charge
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise IS 1969 (Part 1))	-	1100	25% Discount on Testing Charge
5.2 and Table 1 vi(Breaking strength of bottom seam IS 9030 )	-	1100	25% Discount on Testing Charge
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	2200	10180 Specimen Conditioning charge towards UV exposure 25% Discount on Testing Charge
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise IS 1969 (Part 1))	-	1100	25% Discount on Testing Charge
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise IS 1969 (Part 1))	-	1100	25% Discount on Testing Charge
5.2 and Table 1 x(Ash content )	-	950	25% Discount on Testing Charge
4.2(Tapes – Linear Density )	-	700	25% Discount on Testing Charge
4.3(Sacks)	-	250	25% Discount on Testing Charge
4.3.1(The two rows of stitches shall be separated from each other)	-	250	25% Discount on Testing Charge
4.3.1( The outer stitch)	-	250	25% Discount on Testing Charge
4.3.1( The stitching shall be done with double fold over seam to a depth )	-	250	25% Discount on Testing Charge
4.3.1(Stitches pass through a minimum of six layers of the fabric. )	-	250	25% Discount on Testing Charge
4.3.1(stitches/dm)	-	250	25% Discount on Testing Charge
4.3.2(Mouth)	-	250	25% Discount on Testing Charge
4.4(Liner IS 10146 or IS 10910.)	-	1050	25% Discount on Testing Charge
4.4(Bottom seam of the loose liner)	-	250	25% Discount on Testing Charge
4.4(Mass of the loose liner )	-	500	25% Discount on Testing Charge
4.4(Width of the loose liner)	-	250	25% Discount on Testing Charge
4.4.1(Liner)	-	1050	25% Discount on Testing Charge

22 May, 2027

-
50Kg/ 25 Kg For finished product only

9351

CIPET, Madurai

6139834

IS 14333 (1996)

High Density Polyethylene Pipe For Sewerage -

63-315 mm

8681 View breakup
For Others: Rs.11,475/- Rs.3,225/- For raw material (optional) For BIS: Rs.8,681/- Rs.3,044/- For raw material (optional)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10(Marking)	-	300	25% Discount on Testing Charge
3(Designation)	-	300	25% Discount on Testing Charge
4(Colour)	-	300	25% Discount on Testing Charge
6(Dimensions of pipes)	-	250	25% Discount on Testing Charge
7(Visual Appearance)	-	300	25% Discount on Testing Charge
8.1(Hydraulic characteristics)	-	6400	Including Type and Acceptance Test 25% Discount on Testing Charge
8.2(Reversion)	-	700	300 for Specimen Preparation 25% Discount on Testing Charge
8.4(Melt Flow Rate)	-	1100	25% Discount on Testing Charge
8.3(Density)	-	500	25% Discount on Testing Charge
Cl. 8.5, IS 2530-1963, Cl. 10(Cabon Black Content)	-	925	25% Discount on Testing Charge
Cl. 8.5, IS 2530-1963, Cl. 16(Carbon Black Dispersion)	-	700	25% Discount on Testing Charge
5.1(High Density Polyethylene)	-	-	-
5.2(Anti Oxident)	-	-	-

22 May, 2027

-
Up to 200 ND only The following tests are Sub Contracted to other NABL accredited CIPET Labs as given below. 1. Anti-Oxidant - M/s CIPET, Chennai Testing charges has been fixed for a period of two years w.e.f. 28.01.2019 i.e. up to 27.01.2021.

9352

CIPET, Madurai

6139834

IS 14252 (2015)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sack for filling sand – Specification (second revision)

PP/HDPE

18853 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Raw Material)	-	1050	25% Discount on Testing Charge
4.1 and Table 1 i a(Dimensions Outside Length)	-	250	25% Discount on Testing Charge
4.1 and Table 1 i b(Dimensions Outside Width)	-	250	25% Discount on Testing Charge
4.1 and Table 1 ii(Ends per dm )	-	250	25% Discount on Testing Charge
4.2 and Table 1 iv(Mass of sack )	-	250	25% Discount on Testing Charge
4.1 and Table 1 v a(Average breaking strength of fabric Warpway )	-	1100	25% Discount on Testing Charge
4.1 and Table 1 ix(Ash content )	-	950	25% Discount on Testing Charge
4.1 and Table 1 viii(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	1100	RS 10340 will be charged towards specimen conditioning charge for UV Exposure length and Width wise will be charged separately 25% Discount on Testing Charge
4.1 and Table 1 iii(Picks per dm )	-	250	25% Discount on Testing Charge
4.1 and Table 1 vii a(Elongation at break of fabric Lengthwise)	-	1100	25% Discount on Testing Charge
4.1 and Table 1 vii b(Elongation at break of fabric Widthwise )	-	1100	25% Discount on Testing Charge
3.2(Tapes – Width )	-	250	25% Discount on Testing Charge
3.2(Tapes – Linear Density )	-	700	25% Discount on Testing Charge
3.3(Tying Cord)	-	250	25% Discount on Testing Charge
3.4(Sack)	-	250	25% Discount on Testing Charge
3.4.1(Seam)	-	250	25% Discount on Testing Charge
4.1 and Table 1 v b(Average breaking strength of fabric Weftway )	-	1100	25% Discount on Testing Charge
4.1 and Table 1 vi(Average Breaking strength of bottom seam )	-	1100	25% Discount on Testing Charge

22 May, 2027

-
For Finished product only

9353

CIPET, Madurai

6139834

IS 13592 (2013)

Unplasticized Polyvinyl Chloride (PVC-U) Pipes for Soil and Waste Discharge System Inside and Outside Buiildings Including Ventilation and Rainwater System

Pipes for Soil and Waste Discharge System (TYPE A & B)

13225 View breakup
For Others: Rs.16000/- for Type A Rs.16500/- for Type B Rs.1100/- for PVC resin Rs.21800/- for effect of sun light For BIS: Rs.12400/- for Type A Rs.12725/- for Type B Rs.825/- for PVC resin Rs.21800/- for effect of sun light

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.5(Surface colour of the pipes shall be dark shade of grey)	-	300	25% Discount on Testing Charge
Cl6.3(The composition shall be based on PVC resin having a K-value of 64 or greater when tested in accordance with IS 4669)	-	1100	25% Discount on Testing Charge
Cl.7.1(Mean out side Diameter (For less than or equal to 40 mm- Average of 8 , For higher diameters up to 110 mm average of 6))	-	500	All dimension Included 25% Discount on Testing Charge
Cl.7.1(Outside Diameter at any point (Take 8 reading reported minimum, maximum))	-	0	All dimension Included 25% Discount on Testing Charge
Cl.7.1(Wall thickness "minimum,maximum" (Take 8 reading))	-	0	All dimension Included 25% Discount on Testing Charge
Cl.7.2(Pipes shall be supplied in nominal lengths of 2, 3, 4 or 6 metres either plain or with socket for solvent cementing/grooved socket. Tolerances on specified length shall be + 10 mm and – 0 mm.The nominal length of the pipe with socket for solvent cementing/grooved socket shall be as given in Fig. 1.)	-	0	All dimension Included 25% Discount on Testing Charge
Cl.7.3.1(Minimum wall thickness of socket on pipes shall be as given in Table 2 read with Fig. 2 and Fig. 3.)	-	0	All dimension Included 25% Discount on Testing Charge
Cl.7.3.2(Dimensions of sockets for solvent cementing and grooved sockets of pipes shall be as given in Tables 3 and 4 respectively, read with Fig. 2 and 3.)	-	0	All dimension Included 25% Discount on Testing Charge
Cl.8.1(The internal and external surface of the pipes shall be smooth and clean, and free from grooving and other defects. The end shall be clearly cut and shall be square with the axis of the pipe. The end may be chamfered on the plain side.)	-	300	25% Discount on Testing Charge
Cl.8.2(When tested by the method described in IS 12235 (Part 5), a length of pipe sample of 200 ± 20 mm shall not alter in length by more than 5 percent. In the case of socket ended pipes, this test shall be carried out on the plain portion of pipe taken at least 100 mm away from the root of the socket.)	-	700	300 Sample Preparation charge 25% Discount on Testing Charge
Cl8.3(This test shall be carried out for socket end pipes only. When tested by the method described in IS 12235 (Part 6), the test specimens shall not show blisters, excessive delamination or cracking or signs of weld line splitting.)	-	700	25% Discount on Testing Charge
Cl.8.4(When determined in accordance with IS 12235 (Part 2), the vicat softening temperature of the specimen shall not be less than 79°C.)	-	1100	25% Discount on Testing Charge
Cl.8.5(After the required period of exposure, the tensile strengths of two samples when tested as per IS 12235 (Part 13) shall not show difference of more than 20 percent of their initial tensile strengths)	-	3500	Natural Weathering 25% Discount on Testing Charge
Cl. 9, IS 12235 Part 7(Resistance to Sulphuric Acid)	-	2000	500 Specimen Condition Charge 25% Discount on Testing Charge
Cl.10.1(When tested by method prescribed in IS 12235 (Part 9),the pipe shall have a true impact rate of not more than 10 percent. Mass of striker and height of fall shall be as per Annex A.)	-	1100	300 Specimen Condition Charge 25% Discount on Testing Charge
Cl.10.2(When determined in accordance with the method described in IS 12235 (Part 13), the tensile strength at break shall not be less than 45 MPa.)	-	1100	250 Specimen Condition Charge 25% Discount on Testing Charge Before and After Exposure will be charged separately
Cl.10.3(The axial shrinkage shall not exceed 2 percent when determined in accordance with Annex B.)	-	1100	25% Discount on Testing Charge
Cl. 12, IS 12235 Part 11(Resistance to Di-Chloro-Methane)	-	1000	25% Discount on Testing Charge
Cl.11.(Jointing of solvent cementing joints is to be carried out using solvent conforming to IS 14182. Apply a pressure of 0.05 MPa for a period of 15 min and there should be no leakage at any joint.)	-	1000	25% Discount on Testing Charge
8.6(Effect on Water Test)	-	3000	25% Discount on Testing Charge
14(Marking)	-	250	25% Discount on Testing Charge

22 May, 2027

-
Up to 200 ND only. Testing charges has been fixed for a period of two years w.e.f. 28.01.2019 i.e. up to 27.01.2021.

9354

CIPET, Madurai

6139834

IS 13488 (2008)

Irrigation equipment - Emitting pipe systems - Specification (First Revision)

Emitting pipe systems

9544 View breakup
Rs.12075/- (For BIS: Rs.9056/- Rs.6550/- for raw material (For BIS: Rs.5106/-)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Materials - shall be resistant to fertilizers and chemicals commonly employed in irrigation, and shall be suitable for use with water at temperatures up to 60°C and at pressures designed for the emitting pipe)	-	1050	25% Discount for BIS
5.1.2 (Ref. Cl 4.1.a of IS 12786 : 1989)(Potyethylene - higher olefins constituent )	-	1050	25% Discount for BIS
5.1.2 (Ref. Cl 4.1.b of IS 12786 : 1989)(Potyethylene - anti-oxidant)	-	1050	25% Discount for BIS
5.1.2 (Ref. Cl 4.1.c.i of IS 12786 : 1989)(Density)	-	500	600 Sample Preparation charge 25% Discount for BIS on Testing charge Only
5.1.2 (Ref. Cl 4.1.c.ii of IS 12786 : 1989)(Toluene extract - Annex A of IS 12786:1989)	-	1000	25% Discount for BIS
5.1.2 (Ref. Cl 4.1.c.iii of IS 12786 : 1989)(Volatile matter - Annex B of IS 12786:1989)	-	700	25% Discount for BIS
5.1.2 (Ref. Cl 4.1.c & 4.2.a of IS 12786 : 1989)(Carbon Black content - IS 2530 : 1963)	-	925	25% Discount for BIS
5.1.2 (Ref. Cl 4.2.b of IS 12786 : 1989)(The dispersion of Carbon Black content shall be satisfactory - IS 2530 : 1963)	-	700	25% Discount for BIS
6.3(General)	-	300	25% Discount for BIS
8.1.2(Uniformity of Emission Rate for Unregulated Emitting Pipes)	-	1000	25% Discount for BIS
8.2(Emission Rate of Emitting Unit as a Function of Inlet Pressure)	-	1000	25% Discount for BIS
8.3.3(Flow Paths in Emitting Unit)	-	500	25% Discount for BIS
8.4.1(Resistance to Hydrostatic Pressure at Ambient Temperature)	-	1000	25% Discount for BIS
8.4.2(Resistance to Hydrostatic Pressure at Elevated Temperature)	-	1600	25% Discount for BIS
8.5(Resistance to Tension at Elevated Temperature)	-	1100	25% Discount for BIS
8.7.1(Resistance of PE Emitting Pipe to Environmental Stress Cracking -Acceptance Test Annex D of IS 12786)	-	1200	25% Discount for BIS
8.6(Resistance to Pull Out of Joints Between Fitting and Emitting IS 13479)	-	399.98	25% Discount for BIS
8.7.2(Resistance of PE Emitting Pipe to Environmental Stress Cracking - Type Test Annex D of IS 12786)	-	1600	25% Discount for BIS
8.8(Determination of Emitting Unit Exponent)	-	600	25% Discount for BIS

22 May, 2027

-
-

9355

CIPET, Madurai

6139834

IS 13487 (1992)

Irrigation equipment - Emitters - Specification

Emitters

6496.87 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.2(Flow path in emitters)	-	300	25 % Discount on testing charges
7.1(Construction and workmanship)	-	300	25 % Discount on testing charges
7.3.1(Resistance to Hydrostatic pressure)	-	1100	25 % Discount on testing charges
7.4.1(Emitter Pull Out In-line emitters)	-	500	25 % Discount on testing charges
8.1.2(Uniformity of Emission Rate Unregulated emitters)	-	1000	25 % Discount on testing charges
8.2.2(Emission rate as a function of inlet pressure Unregulated emitters)	-	1000	25 % Discount on testing charges
8.3(Determination of Emitter Exponent)	-	600	25 % Discount on testing charges
7.3.2(Resistance to Hydrostatic pressure)	-	1100	25 % Discount on testing charges
7.3.3(Resistance to Hydrostatic pressure)	-	1100	25 % Discount on testing charges
7.4.2(Emitter Pull Out On-line emitters)	-	500	25 % Discount on testing charges
8.1.3(Uniformity of Emission Rate Regulated emitters)	-	1000	25 % Discount on testing charges
8.2.3(Emission rate as a function of inlet pressure Regulated emitters)	-	1000	25 % Discount on testing charges
4(Classification)	-	250	25 % Discount on testing charges
5.1(Connections)	-	250	25 % Discount on testing charges
5.2(Emitter Ends)	-	250	25 % Discount on testing charges
5.3(Materials)	-	1050	25 % Discount on testing charges
9(Marking)	-	250	25 % Discount on testing charges

22 May, 2027

-
Testing charges has been fixed for a period of two years w.e.f. 28.01.2019 i.e. up to 27.01.2021. Regulated Emitters included w.e.f. 12-02-2020.

9356

CIPET, Madurai

6139834

IS 12818 (2010)

Unplasticized polyvinyl chloride (Pvc - U) screen and casing pipes for bore/tubewells - Specification (Second Revision)

Unplasticized polyvinyl chloride (Pvc - U) screen and c

8294 View breakup
For Others: Rs.10625/- for plain screen Rs.10125/- for ribbed screen Rs.4100/- for PVC resin For BIS: Rs.8294/- for plain screen Rs.7794/- for ribbed screen Rs.3075/- for PVC resin

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.6(Vicat Softening Temperature IS 12235 (Part 2).)	-	1100	25% Discount on testing charge
9.5(Tensile Strength IS 12235(Part 13))	-	1100	500 Specimen Preparation charge 25% Discount on testing charge
9.4 and Table 14(Resistance to External Blows at 0 ?C IS 12235 (Part 9))	-	1100	300 Specimen Preparation charge 25% Discount on testing charge
9.3(Density IS 12235 (Part 14))	-	500	25% Discount on testing charge
9.2(Internal Diameter)	-	1000	Specimen preparation charge -500 25% Discount on testing charge
9.1( Visual Appearance)	-	300	25% Discount on testing charge
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	250	25% Discount on testing charge
8.4.1 and Table 13 Fig 3B & 4B(Dimensions of sealing elements)	-	250	25% Discount on testing charge
7.2 and Table 5, 6 & 7 Fig 1B(Wall thickness, Max)	-	0	Included
8.4(Sealing rings - Hardness)	-	375	25% Discount on testing charge
7.1, 7.2 and Table 5, 6 & 7 Fig 1B(Mean outside dia over connection,mm (Take 4 reading and maximum valu reported))	-	0	25% Discount on testing charge
4.1.2 (Ref. Cl 11 of IS 4669)(Composition -Sulphated ash content )	-	975	25% Discount on testing charge
7.3.2(Rib height)	-	0	25% Discount on testing charge
4.1.2 (Ref. Cl 5.1. of IS 4669)(Composition - Loss on heating )	-	1100	25% Discount on testing charge
5(COLOUR)	-	300	25% Discount on testing charge

22 May, 2027

-
Up to 200 ND only. Exclusion: Cl.4.1.1 VCM Content

9357

CIPET, Madurai

6139834

IS 12701 (1996)

Rotational moulded polyethylene water storage tanks - specification (First Revision)

Water Tank

13850 View breakup
For Others: Rs.17150/- (For BIS: Rs.13175/-)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.3(Carbon Black Content )	-	925	25% Discount on testing charge
4.2.3(Carbon Dispersion Test)	-	700	25% Discount on testing charge
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	500	For capacity 25% Discount on testing charge
7.1.1(Resistance to Deformation)	-	1100	25% Discount on testing charge
6.1(Finish)	-	300	25% Discount on testing charge
7.2(Resistance to Impact)	-	1100	25% Discount on testing charge
7.3(Test for Top Load Resistance)	-	900	25% Discount on testing charge
7.4(Tensile Strength)	-	1100	200 Specimen Preparation charge 25% Discount on testing charge
7.5(Flexural Modulus)	-	1100	500 Sample Preparation charge 25% Discount on testing charge
7.6(overall Migration)	-	1700	500 Sample Conditioning Charge 25% Discount on testing charge
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	1800	25% Discount on testing charge
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	250	25% Discount
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	750	25% Discount

22 May, 2027

-
Up to 5000 ltrs capacity only

9358

CIPET, Madurai

6139834

IS 7834 : Part 3 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 3 Specific requirements for 90 degree elbows

90 degree elbows

4219 View breakup
For Others: Rs.5625/- Rs.4100 /- for PVC resin (OPTIONAL) For BIS: Rs.4219/- Rs.3075 /- for PVC resin (OPTIONAL)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
cl 2.2.2(Dimensions)	-	500		25% Discount
Cl. 2.1 (Ref. Cl. 6.3 of IS 7834 (part 1) : 1987(Effect on water - Lead (first extraction) - Appendix C )	-	3000		Charges inclusive of all test as per Clause 6.3 of IS 7834 25% Discount

22 May, 2027

9359

CIPET, Madurai

6139834

IS 7834 : Part 1 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 1 General requirements

4219 View breakup
For Others: Rs.5625/- Rs.4100 /- for PVC resin (OPTIONAL) For BIS: Rs.4219/- Rs.3075 /- for PVC resin (OPTIONAL)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 6.1(Stress Relief Test- Appendix A)	-	700	25% Discount
Cl. 6.2(Opacity- Appendix B)	-	575	25% Discount
Cl. 6.3(Effect on Water[(Lead ( first extraction )]- Appendix C)	-	3000	25% Discount
Cl. 6.4(Short-Term Hydraulic Test- Appendix D)	-	850	25% Discount
Cl.4(Minimum Thickness)	-	500	25% Discount
Cl. 5.1.1, 5.1.2, Table 1, Fig 1(Mean Socket Internal Diameter at Mid-Point of Socket Length)	-	0	Rs 500 inclusive of all dimension as described in Clause 4 and 5

22 May, 2027

9360

CIPET, Madurai

6139834

IS 4985 (2021)

UNPLASTICIZED PVC PIPES FOR POTABLE WATER SUPPLIES SPECIFICATION Fourth Revision

Upto 200ND Only

20244 View breakup
For Others: Rs.9475/- for plumbing pipes Rs.26325 /- for elastomeric sealing ring socket pipes Rs.20975/- for plain pipes Rs.4100 /- for PVC resin For BIS: Rs.7606/- for plumbing pipes Rs.20244/- for elastomeric sealing ring socket pipes Rs.15856/- for plain pipes Rs.3075/- for PVC resin

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11.2(Resistance to External Blows at 0°C)	-	1000	300 Sample Preparation charge 25% Discount on Test Charges
11.1.1(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Plumbing pipes)	-	850	25% Discount on Test Charges
10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density)	-	500	25% Discount on Test Charges
10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature)	-	1100	25% Discount on Test Charges
10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test)	-	700	200 Sample Preparation charge 25% Discount
10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity)	-	575	25% Discount on Test Charges
10.1.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	300	25% Discount on Test Charges
10.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	0	25% Discount on Test Charges
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Maximum))	-	500	Inclusive of 7.1.1 2 7.1.1.1 ,7.1.2.1 7 7.2.1.1 7.2.1 25% Discount
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Minimum))	-	0	0
7.1.2.1(DIMENSIONS-PIPE-Thickness(Maximum))	-	0	Charged in 7.1.1.2
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Mamimum))	-	0	Charged in 7.1.1.2
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Minimum))	-	0	Charged in 7.1.1.2
Clause 10.7(Sulphated Ash Content)	-	950	25% Discount on Test Charges
7(DIMENSIONS-PIPE-Nominal Diameter)	-	0	Charged in 7.1.1.2
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Minimum Length)	-	0	Charged in 7.1.1.2
7.2.1(DIMENSIONS-Socket)	-	0	Charged in 7.1.1.2
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test))	-	11000	Additional Rs 5000 for integral sealing ring socket 25% Discount on Test Charges on sub total
11.2(Resistance to External Blows at 0°C)	-	1000	300 Sample Preparation Charge 25% Discount on Test Charges
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test))	-	850	25% Discount on Test Charges
10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density)	-	500	25% Discount on Test Charges
10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature)	-	1100	25% Discount on Test Charges
10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test)	-	700	200 Sample Preparation Charges 25% Discount on Test Charges
10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity)	-	500	25% Discount on Test Charges
10.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	0	-
10.1.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	0	-
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Maximum))	-	0	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Minimum Length)	-	0	-
7.1.2.1(DIMENSIONS-PIPE-Thickness(Maximum))	-	0	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Mamimum))	-	0	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Minimum))	-	0	-
10.7(Sulphated Ash Content)	-	950	25% Discount on Test Charges
Cl-7.1(Mean out side Diameter (For less than or equal to 40 mm- Average of 8 , For higher diameters up to 110 mm average of 6))	-	0	-
Cl- 7.2(Socket length (Take 4 reading & minimum will be reported))	-	0	-
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test))	-	11000	25% Discount on Test Charges
10.3(Effect on Water Test)	-	3000	25% Discount on Test Charges
6.1.2(PVC Resin)	-	4100	25% Discount on Test Charges
7.2.1.1 Table3(Angle of taper (Note-1))	-	0	-
7.1.4(Length)	-	0	-
11.1.1(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Plumbing pipes)	-	850	25% Discount on Test Charges
7.1.3(mean outside diameter, outside diameter at any point, and wall thickness of plumbing pipes)	-	500	25% Discount on Test Charges

22 May, 2027

-
REVISED VERSION OF IS 4985:2021 INCLUDED W.E.F. 4-10-2021. Up to 200 ND only Exclusion: Cl.6.1.1 VCM content

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number