BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15122 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

9271

NAWaL Analytical Labs India Private Limited, Hosur

6126416

IS 2052 (2023)

Compounded feeds for cattle ï¿½ Specification

17500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl no.4.1(General)	-	1000	+18 % GST Extra
Cl no.4.3,7.1, Table no. 1(i)(Moisture)	-	1000	+18 % GST Extra
Cl no.4.3,7.1, Table no. 1(ii)(Crude protein (N × 6.25))	-	1000	+18 % GST Extra
Cl no.4.3, 7.1,Table no. 1(iii)(Crude fat)	-	1000	+18 % GST Extra
Cl no.4.3 ,7.1, Table no. 1(iv)(Crude fibre)	-	1000	+18 % GST Extra
Cl no.4.3 ,7.1, Table no. 1(v)(Acid insoluble ash)	-	1000	-
Cl no.4.3,7.1Table no. 1(vi)("Salt (as NaCl based on Na or Cl), percent by mass")	-	1000	+18 % GST Extra
Cl no.4.3 7.1,Table no. 1(vii)(Calcium (as Ca))	-	1000	+18 % GST Extra
Cl no.4.3,7.1,Table no. 1(viii)(Total phosphorus)	-	1000	+18 % GST Extra
Cl no.4.3,7.1,Table no. 1(ix)(Available phosphorus)	-	1000	+18 % GST Extra
Cl no.4.3 ,7.1, Table no. 1(x)(Urea, percent by mass)	-	1000	+18 % GST Extra
Cl no.4.3,7.1, Table no. 1(xi)(Vitamin A)	-	1000	+18 % GST Extra
Cl no.4.3,7.1,Table no. 1(xii)(Vitamin D)	-	1000	+18 % GST Extra
Cl no.4.3 ,7.1, Table no. 1(xiii)(Vitamin E)	-	1000	+18 % GST Extra
Cl no.4.3 ,7.1, Table no. 1(xiv)(Aflatoxin B1)	-	2500	+18 % GST Extra
Cl no.4.3 ,7.1, Table no. 1(xv)(Cadmium)	-	1000	+18 % GST Extra
4.1(General)	-	1000	+18 % GST Extra
Cl no.4.2(Ingredients)	-	0	0
Cl no.5(Packing and marking)	-	0	0
4.3 Table no.1 (i)(Moisture/4 of IS 7874 (Part 1))	-	0	0
4.3 Table no.1 (ii)("Crude Protein(ODB)/IS/ISO 5983 (Part 1)* or IS 5983 (Part 2) or ISO 16634-1")	-	0	0
4.3 Table no.1 (iii)(Crude fat (ODB) /IS/ISO 6492)	-	0	0
4.3 Table no.1 (iv)("Crude fibre (ODB)/IS/ISO 6865 ")	-	0	0
4.3 Table no.1 (v)(Acid insoluble ash (ODB)/Annex A of IS 1712 or IS 14826*)	-	0	0
4.3 Table no.1 (vi)("Salt (ODB)(as NaCl based on Na or Cl)/4 of IS 7874 (Part 2)")	-	0	0
4.3 Table no.1 (vii)(Calcium(ODB) (as Ca)/IS 13433 (Part 1) or IS 15121* or EN 15621)	-	0	0
4.3 Table no.1 (viii)(Total phosphorus (ODB)/IS 14828* or EN 15621)	-	0	0
4.3 Table no.1 (ix)(Available phosphorus (ODB)/Annex F of IS 1374)	-	0	0
4.3 Table no.1 (x)(Urea (ODB)/IS 7874 (Part 1) or AOAC 967.07)	-	0	0
4.3 Table no.1 (xi)(Vitamin A(ODB)/IS 15120)	-	0	0
4.3 Table no.1 (xii)("Vitamin D3 (ODB)/Annex C * or J. AOAC Int. 2012, Vol. 95, No. 5, Pages 1487–1494")	-	0	0
4.3 Table no.1 (xiii)(Vitamin E(ODB)/IS 15948)	-	0	0
4.3 Table no.1 (xiv)("Aflatoxin B1 (ODB)/IS/ISO 14718* or ISO 17375 or AOAC 2003.02")	-	0	0
4.3 Table no.1 (xv)(Cadmium (ODB)/EN 17053)	-	0	0
4.2.2(Ratio of total nitrogen to sulphur/ IS/ISO 5983 (Part 1)* or IS/ISO 5983 (Part 2) ISO 16634-Sulphur-AnnexB (IS 1664 or EN 15621))	-	0	0
Cl no.4.1(General)	-	0	0
Cl no.4.3,7.1, Table no. 1(i)(Moisture)	-	0	0
Cl no.4.3,7.1, Table no. 1(ii)(Crude protein (N × 6.25))	-	0	0
Cl no.4.3, 7.1,Table no. 1(iii)(Crude fat)	-	0	0
Cl no.4.3 ,7.1, Table no. 1(iv)(Crude fibre)	-	0	0
Cl no.4.3 ,7.1, Table no. 1(v)(Acid insoluble ash)	-	0	0
Cl no.4.3,7.1Table no. 1(vi)("Salt (as NaCl based on Na or Cl), percent by mass")	-	0	0
Cl no.4.3 7.1,Table no. 1(vii)(Calcium (as Ca))	-	0	0
Cl no.4.3,7.1,Table no. 1(viii)(Total phosphorus)	-	0	0
Cl no.4.3,7.1,Table no. 1(ix)(Available phosphorus)	-	0	0
Cl no.4.3 ,7.1, Table no. 1(x)(Urea, percent by mass)	-	0	0
Cl no.4.3,7.1, Table no. 1(xi)(Vitamin A)	-	0	0
Cl no.4.3,7.1,Table no. 1(xii)(Vitamin D)	-	0	0
Cl no.4.3 ,7.1, Table no. 1(xiii)(Vitamin E)	-	0	0
Cl no.4.3 ,7.1, Table no. 1(xiv)(Aflatoxin B1)	-	0	0
Cl no.4.3 ,7.1, Table no. 1(xv)(Cadmium)	-	0	0
4.1(General)	-	0	0
Cl no.4.2(Ingredients)	-	0	0
Cl no.5(Packing and marking)	-	0	0
4.3 Table no.1 (i)(Moisture/4 of IS 7874 (Part 1))	-	0	0
4.3 Table no.1 (ii)("Crude Protein(ODB)/IS/ISO 5983 (Part 1)* or IS 5983 (Part 2) or ISO 16634-1")	-	0	0
4.3 Table no.1 (iii)(Crude fat (ODB) /IS/ISO 6492)	-	0	0
4.3 Table no.1 (iv)("Crude fibre (ODB)/IS/ISO 6865 ")	-	0	0
4.3 Table no.1 (v)(Acid insoluble ash (ODB)/Annex A of IS 1712 or IS 14826*)	-	0	0
4.3 Table no.1 (vi)("Salt (ODB)(as NaCl based on Na or Cl)/4 of IS 7874 (Part 2)")	-	0	0
4.3 Table no.1 (vii)(Calcium(ODB) (as Ca)/IS 13433 (Part 1) or IS 15121* or EN 15621)	-	0	0
4.3 Table no.1 (viii)(Total phosphorus (ODB)/IS 14828* or EN 15621)	-	0	0
4.3 Table no.1 (ix)(Available phosphorus (ODB)/Annex F of IS 1374)	-	0	0
4.3 Table no.1 (x)(Urea (ODB)/IS 7874 (Part 1) or AOAC 967.07)	-	0	0
4.3 Table no.1 (xi)(Vitamin A(ODB)/IS 15120)	-	0	0
4.3 Table no.1 (xii)("Vitamin D3 (ODB)/Annex C * or J. AOAC Int. 2012, Vol. 95, No. 5, Pages 1487–1494")	-	0	0
4.3 Table no.1 (xiii)(Vitamin E(ODB)/IS 15948)	-	0	0
4.3 Table no.1 (xiv)("Aflatoxin B1 (ODB)/IS/ISO 14718* or ISO 17375 or AOAC 2003.02")	-	0	0
4.3 Table no.1 (xv)(Cadmium (ODB)/EN 17053)	-	0	0
4.2.2(Ratio of total nitrogen to sulphur/ IS/ISO 5983 (Part 1)* or IS/ISO 5983 (Part 2) ISO 16634-Sulphur-AnnexB (IS 1664 or EN 15621))	-	0	0
Cl no.4.1(General)	-	0	0
Cl no.4.3,7.1, Table no. 1(i)(Moisture)	-	0	0
Cl no.4.3,7.1, Table no. 1(ii)(Crude protein (N × 6.25))	-	0	0
Cl no.4.3, 7.1,Table no. 1(iii)(Crude fat)	-	0	0
Cl no.4.3 ,7.1, Table no. 1(iv)(Crude fibre)	-	0	0
Cl no.4.3 ,7.1, Table no. 1(v)(Acid insoluble ash)	-	0	0
Cl no.4.3,7.1Table no. 1(vi)("Salt (as NaCl based on Na or Cl), percent by mass")	-	0	0
Cl no.4.3 7.1,Table no. 1(vii)(Calcium (as Ca))	-	0	0
Cl no.4.3,7.1,Table no. 1(viii)(Total phosphorus)	-	0	0
Cl no.4.3,7.1,Table no. 1(ix)(Available phosphorus)	-	0	0
Cl no.4.3 ,7.1, Table no. 1(x)(Urea, percent by mass)	-	0	0
Cl no.4.3,7.1, Table no. 1(xi)(Vitamin A)	-	0	0
Cl no.4.3,7.1,Table no. 1(xii)(Vitamin D)	-	0	0
Cl no.4.3 ,7.1, Table no. 1(xiii)(Vitamin E)	-	0	0
Cl no.4.3 ,7.1, Table no. 1(xiv)(Aflatoxin B1)	-	0	0
Cl no.4.3 ,7.1, Table no. 1(xv)(Cadmium)	-	0	0
4.1(General)	-	0	0
4.3 Table no.1 (i)(Moisture/4 of IS 7874 (Part 1))	-	0	0
4.3 Table no.1 (ii)("Crude Protein(ODB)/IS/ISO 5983 (Part 1)* or IS 5983 (Part 2) or ISO 16634-1")	-	0	0
4.3 Table no.1 (iii)(Crude fat (ODB) /IS/ISO 6492)	-	0	0
4.3 Table no.1 (iv)("Crude fibre (ODB)/IS/ISO 6865 ")	-	0	0
4.3 Table no.1 (v)(Acid insoluble ash (ODB)/Annex A of IS 1712 or IS 14826*)	-	0	0
4.3 Table no.1 (vi)("Salt (ODB)(as NaCl based on Na or Cl)/4 of IS 7874 (Part 2)")	-	0	0
4.3 Table no.1 (vii)(Calcium(ODB) (as Ca)/IS 13433 (Part 1) or IS 15121* or EN 15621)	-	0	0
4.3 Table no.1 (viii)(Total phosphorus (ODB)/IS 14828* or EN 15621)	-	0	0
4.3 Table no.1 (ix)(Available phosphorus (ODB)/Annex F of IS 1374)	-	0	0
4.3 Table no.1 (x)(Urea (ODB)/IS 7874 (Part 1) or AOAC 967.07)	-	0	0
4.3 Table no.1 (xi)(Vitamin A(ODB)/IS 15120)	-	0	0
4.3 Table no.1 (xii)("Vitamin D3 (ODB)/Annex C * or J. AOAC Int. 2012, Vol. 95, No. 5, Pages 1487–1494")	-	0	0
4.3 Table no.1 (xiii)(Vitamin E(ODB)/IS 15948)	-	0	0
4.3 Table no.1 (xiv)("Aflatoxin B1 (ODB)/IS/ISO 14718* or ISO 17375 or AOAC 2003.02")	-	0	0
4.3 Table no.1 (xv)(Cadmium (ODB)/EN 17053)	-	0	0
4.2.2(Ratio of total nitrogen to sulphur/ IS/ISO 5983 (Part 1)* or IS/ISO 5983 (Part 2) ISO 16634-Sulphur-AnnexB (IS 1664 or EN 15621))	-	0	0

21 Mar, 2028

-
Included w.e.f 20.12.2024

9272

GIGA LABS, BENGALURU

6177526

IS/IEC 60947 : Part 5 : Sec 1 (2009)

Low - Voltage switchgear and controlgear: Part 5 control circuit devices and switching elements: Sec 1 electromechanical control circuit devices (First Revision)

128000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.3.3.2(Operating limits of contactor relays )	-	60000	-
8.3.3.3(Temperature rise )	-	60000	-
8.3.3.4(Dielectric properties)	-	60000	-
8.2.4 of IS/IEC 60947-1(Mechanical properties of Terminal)	-	60000	-
8.3.3.5.3(– Making and breaking capacities of switching elements under abnormal conditions )	-	15000	-
8.3.3.5.5 b)( Dielectric verification)	-	15000	-
8.3.3.5.5 b)(Dielectric verification)	-	15000	-
8.3.4.1(Performance under conditional short-circuit current)	-	30000	-
Annex C of IEC 60947-1(Degree of protection of enclosed control circuit devices)	-	10000	-
7.1.3(Measurement of clearances and creepage distances, if applicable)	-	5000	-
8.3.3.5.5 b)(Dielectric verification)	-	15000	-
8.3.3.2(Operating limits of contactor relays )	-	15000	-
8.3.3.3(Temperature rise )	-	15000	-
8.3.3.4(Dielectric properties)	-	15000	-
8.2.4 of IS/IEC 60947-1(Mechanical properties of Terminal)	-	15000	-
8.3.3.5.3(– Making and breaking capacities of switching elements under abnormal conditions )	-	15000	-
8.3.3.5.5 b)( Dielectric verification)	-	15000	-
8.3.3.5.5 b)(Dielectric verification)	-	15000	-
8.3.4.1(Performance under conditional short-circuit current)	-	30000	-
Annex C of IEC 60947-1(Degree of protection of enclosed control circuit devices)	-	10000	-
7.1.3(Measurement of clearances and creepage distances, if applicable)	-	5000	-
8.1.5(Special tests)	-	1000	-
Annex C(No. of operations)	-	1000	-
C.1.2(Observation)	-	1000	-
C.2(Mechanical durability)	-	1000	-
G.8.1.1(Pull test)	-	1000	-
G.8.1.2(Torque test)	-	1000	-
G.8.1.3(Push test)	-	1000	-
G.8.1.4(Bend test)	-	1000	-
7(Constructional requirements)	-	1000	-
Low - Voltage switchgear and controlgear: Part 5 control circuit devices and switching elements: Sec 1 electromechanical control circuit devices (First Revision)(Verification of direct opening action)	-	1000	-
7.1 & 8.2(Constructional requirements)	-	1000	-
7.3.1(General)	-	1000	-
7.3.2(Immunity)	-	1000	-
7.3.3(Emission)	-	1000	-
5.2.1( Marking : General )	-	1000	-
5.2.1( Marking : General )	-	1000	-
5.2.1( Marking : General )	-	1000	-
5.2.1( Marking : General )	-	1000	-
5.2.1( Marking : General )	-	1000	-
5.2.2(Terminal identification and marking)	-	1000	-
5.2.3(Functional markings )	-	1000	-
5.2.5(Operating diagram)	-	1000	-
5.2.5.1( Position indication )	-	1000	-
5.2.5.2( Terminal markings for operating diagrams)	-	1000	-
5.2.6(Time delay markings)	-	1000	-
5.3(Instructions for installation, operation and maintenance)	-	1000	-
5.4(Additional information)	-	1000	-
8.3.3.5.2( Making and breaking capacities of switching elements under normal conditions)	-	1000	-
8.3.4.2(Performance under conditional short-circuit current : Test procedure)	-	1000	-
8.3.4.3(Test circuit and test quantities)	-	1000	-
8.3.4.4 a)(Condition of the switching element after the test )	-	1000	-
8.3.4.4 b)(Condition of the switching element after the test )	-	1000	-
8.3.3.5.5 b)(Dielectric verification)	-	1000	-
8.3.3.2(Operating limits of contactor relays )	-	1000	-
8.3.3.3(Temperature rise )	-	1000	-
8.3.3.4(Dielectric properties)	-	1000	-
8.2.4 of IS/IEC 60947-1(Mechanical properties of Terminal)	-	1000	-
8.3.3.5.3(– Making and breaking capacities of switching elements under abnormal conditions )	-	1000	-
8.3.3.5.5 b)( Dielectric verification)	-	1000	-
8.3.3.5.5 b)(Dielectric verification)	-	1000	-
8.3.4.1(Performance under conditional short-circuit current)	-	1000	-
Annex C of IEC 60947-1(Degree of protection of enclosed control circuit devices)	-	1000	-
7.1.3(Measurement of clearances and creepage distances, if applicable)	-	1000	-
8.1.5(Special tests)	-	1000	-
Annex C(No. of operations)	-	1000	-
C.1.2(Observation)	-	1000	-
C.2(Mechanical durability)	-	1000	-
G.8.1.1(Pull test)	-	1000	-
G.8.1.2(Torque test)	-	1000	-
G.8.1.3(Push test)	-	1000	-
G.8.1.4(Bend test)	-	1000	-
7(Constructional requirements)	-	1000	-
Low - Voltage switchgear and controlgear: Part 5 control circuit devices and switching elements: Sec 1 electromechanical control circuit devices (First Revision)(Verification of direct opening action)	-	1000	-
7.1 & 8.2(Constructional requirements)	-	1000	-
7.3.1(General)	-	1000	-
7.3.2(Immunity)	-	1000	-
7.3.3(Emission)	-	1000	-
5.2.1( Marking : General )	-	1000	-
5.2.1( Marking : General )	-	1000	-
5.2.1( Marking : General )	-	1000	-
5.2.1( Marking : General )	-	1000	-
5.2.1( Marking : General )	-	1000	-
5.2.2(Terminal identification and marking)	-	1000	-
5.2.3(Functional markings )	-	1000	-
5.2.5(Operating diagram)	-	1000	-
5.2.5.1( Position indication )	-	1000	-
5.2.5.2( Terminal markings for operating diagrams)	-	1000	-
5.2.6(Time delay markings)	-	1000	-
5.3(Instructions for installation, operation and maintenance)	-	1000	-
5.4(Additional information)	-	1000	-
8.3.3.5.2( Making and breaking capacities of switching elements under normal conditions)	-	1000	-
8.3.4.2(Performance under conditional short-circuit current : Test procedure)	-	1000	-
8.3.4.3(Test circuit and test quantities)	-	1000	-
8.3.4.4 a)(Condition of the switching element after the test )	-	1000	-
8.3.4.4 b)(Condition of the switching element after the test )	-	1000	-
8.3.3.5.5 b)(Dielectric verification)	-	1000	-
8.3.3.2(Operating limits of contactor relays )	-	15000	-
8.3.3.3(Temperature rise )	-	15000	-
8.3.3.4(Dielectric properties)	-	15000	-
8.2.4 of IS/IEC 60947-1(Mechanical properties of Terminal)	-	15000	-
8.3.3.5.3(– Making and breaking capacities of switching elements under abnormal conditions )	-	15000	-
8.3.3.5.5 b)( Dielectric verification)	-	15000	-
8.3.3.5.5 b)(Dielectric verification)	-	15000	-
8.3.4.1(Performance under conditional short-circuit current)	-	15000	-
Annex C of IEC 60947-1(Degree of protection of enclosed control circuit devices)	-	10000	-
7.1.3(Measurement of clearances and creepage distances, if applicable)	-	5000	-
8.1.5(Special tests)	-	5000	-
Annex C(No. of operations)	-	5000	-
C.1.2(Observation)	-	5000	-
C.2(Mechanical durability)	-	5000	-
G.8.1.1(Pull test)	-	5000	-
G.8.1.2(Torque test)	-	5000	-
G.8.1.3(Push test)	-	5000	-
G.8.1.4(Bend test)	-	5000	-
7(Constructional requirements)	-	5000	-
Low - Voltage switchgear and controlgear: Part 5 control circuit devices and switching elements: Sec 1 electromechanical control circuit devices (First Revision)(Verification of direct opening action)	-	5000	-
7.1 & 8.2(Constructional requirements)	-	5000	-
7.3.1(General)	-	5000	-
7.3.2(Immunity)	-	5000	-
7.3.3(Emission)	-	5000	-
5.2.1( Marking : General )	-	5000	-
5.2.1( Marking : General )	-	5000	-
5.2.1( Marking : General )	-	5000	-
5.2.1( Marking : General )	-	5000	-
5.2.1( Marking : General )	-	5000	-
5.2.2(Terminal identification and marking)	-	5000	-
5.2.3(Functional markings )	-	5000	-
5.2.5(Operating diagram)	-	5000	-
5.2.5.1( Position indication )	-	5000	-
5.2.5.2( Terminal markings for operating diagrams)	-	5000	-
5.2.6(Time delay markings)	-	5000	-
5.3(Instructions for installation, operation and maintenance)	-	5000	-
5.4(Additional information)	-	5000	-
8.3.3.5.2( Making and breaking capacities of switching elements under normal conditions)	-	5000	-
8.3.4.2(Performance under conditional short-circuit current : Test procedure)	-	5000	-
8.3.4.3(Test circuit and test quantities)	-	5000	-
8.3.4.4 a)(Condition of the switching element after the test )	-	5000	-
8.3.4.4 b)(Condition of the switching element after the test )	-	5000	-
8.3.3.5.5 b)(Dielectric verification)	-	5000	-
F.8.1.2.3(Rapid change of temperature test)	-	5000	-
F 8.1.2.4(Impact test)	-	5000	-
F 8.1.2.6(Dielectric test after stresses)	-	5000	-
H.8.2(Voltage drop test)	-	5000	-
H.8.5(Making and breaking capacities)	-	5000	-
H.8.6(Performance under short circuit current conditions)	-	5000	-
7, J.7(Constructional requirements)	-	5000	-
J.7.1.12(Indicator lights with built-in transformers)	-	5000	-
J.8.3.3.4.3(Dielectric test (indicator lights with built-in transformers))	-	5000	-
J.8.3.3.3(Temp-rise tests)	-	5000	-

-
Included w.e.f. 07.08.2024 Exclusion: 8.2.5 (Verification of actuation force or moment), 8.2.6 ( Verification of limitation of rotation of a rotary switch), 5.2.4 (Emergency stop), 8.2.5 (Verification of actuation force or moment), C.3 (Electrical durability), H.8.4 (OFF-state current), H.8.7 (Verification of electromagnetic compatibility), H.8.1 f) (Impulse voltage withstand test), J.8.3.4 (Short Circuit test (on built-in transformers, if any)), J.8.4.1.2 (Shock), J.8.4.1.3 (Vibration), J.8.4.2 (Indirect support mounting), J.8.5 (Degree of protection for indicating towers), K 8.3.5 (Mechanical operation at limits of temperature), K 8.3.7 (Test Sequence VIII Verification of robustness of actuating system), K 8.3.4 (Performance under conditional shortcircuit current), L 8.4 (a) (Test of NC contact), L 8.4 (b) (Test of NO contact)

9273

CIPET: CENTRE FOR SKILLING AND TECHNICAL SUPPORT (CSTS) - CHHATRAPATI SAMBHAJINAGAR

7123534

IS 17399 (2020)

Textiles - Polypropylene ( PP )/ High Density Polyethylene ( HDPE ) Laminated Woven Sacks for Mail Sorting, Storage, Transport and Distribution - Specification

33355 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(MANUFACTURE - Raw Materials)	-	2000	-
5.2(MANUFACTURE - Fabric for PP tapes & for HDPE tapes)	-	500	-
5.2- Table 1- i)("REQUIREMENTS - Inside dimensions a) Bottom panel (L × W), mm b) Open top (L × W), mm c) Height (H), mm")	-	500	-
5.2- Table 1- ii)(REQUIREMENTS - Ends per dm)	-	500	-
5.2- Table 1- iii)(REQUIREMENTS - Picks per dm)	-	500	-
5.2- Table 1- iv)(REQUIREMENTS - Mass of laminated sack, g)	-	500	-
5.2- Table 1- v)(REQUIREMENTS - Breaking strength of laminated fabric (Cut strip method1)), Min, N2) (kgf) a) Lengthwise b) Widthwise)	-	2450	1100+250+1100
5.2- Table 1- vi)(REQUIREMENTS - Seam strength of bottom and side panel seam (Cut strip method), Min, N2), (kgf))	-	1100	-
5.2- Table 1- vii)("REQUIREMENTS - Elongation at break of fabric, percent: a) Lengthwise b) Widthwise")	-	0	-
5.2- Table 1- viii)(REQUIREMENTS - Ash content, Max, percent (a) For UV stabilized sacks (b) For non-UV stabilized sacks)	-	950	-
5.3(Lamination)	-	500	-
5.4(Sack Fabrication)	-	500	-
5.5(Capacity)	-	500	-
6.1- Table 1- i)(REQUIREMENTS - Inside dimensions a) Bottom panel (L × W), mm b) Open top (L × W), mm c) Height (H), mm)	-	500	-
6.1- Table 1- ii)(REQUIREMENTS - Ends per dm)	-	500	-
6.1- Table 1- iii)(REQUIREMENTS - Picks per dm)	-	500	-
6.1- Table 1- iv)(REQUIREMENTS - Mass of laminated sack, g)	-	500	-
6.1- Table 1- v)(REQUIREMENTS - Breaking strength of laminated fabric (Cut strip method1)), Min, N2) (kgf))	-	0	-
6.1- Table 1- vi)(REQUIREMENTS - Seam strength of bottom and side panel seam (Cut strip method), Min)	-	0	-
6.1- Table 1- vii)(REQUIREMENTS - Elongation at break of fabric, percent a) Lengthwise b) Widthwise)	-	0	-
6.1- Table 1- viii)(REQUIREMENTS - Ash content, Max, percent (a) For UV stabilized sacks (b) For non-UV stabilized sacks)	-	0	-
6.4(UV Resistance Test)	-	10180	-
7(PRINTING, PACKAGING AND MARKING)	-	500	-
8(ATMOSPHERIC CONDITIONS FOR SAMPLE CONDITIONING AND TESTING)	-	0	-
Clause 5.1(Raw Materials)	-	0	-
"Clause 5.2 Table 1(i)"(Inside dimensions)	-	0	-
"Clause 5.2 Table 1(i)"(Inside dimensions)	-	0	-
"Clause 5.2 Table 1(ii)"(Ends per dm)	-	0	-
"Clause 5.2 Table 1(iii)"(Picks per dm)	-	0	-
"Clause 5.2 Table 1(iv)"("Mass of laminated sack, g")	-	0	-
"Clause 5.2 Table 1(v)"("Breaking strength of laminated fabric")	-	0	-
"Clause 5.2 Table 1(vi)"(Seam strength of bottom and side panel seam)	-	0	-
"Clause 5.2 Table 1(vii)"("Elongation at break of fabric, percent:")	-	0	-
"Clause 5.2 Table 1(viii)"("Ash content, Max, percent")	-	0	-
Clause 5.3(Lamination with a thin film of polypropylene)	-	0	-
Clause 5.4(Sack Fabrication)	-	0	-
Clause 7.3(Marking on Sacks)	-	0	-
Clause 5.1(Raw Materials)	-	0	-
"Clause 5.2 Table 1(i)"(Inside dimensions)	-	0	-
"Clause 5.2 Table 1(ii)"(Ends per dm)	-	0	-
"Clause 5.2 Table 1(iii)"(Picks per dm)	-	0	-
"Clause 5.2 Table 1(iv)"("Mass of laminated sack, g")	-	0	-
"Clause 5.2 Table 1(v)"("Breaking strength of laminated fabric")	-	0	-
"Clause 5.2 Table 1(vi)"(Seam strength of bottom and side panel seam)	-	0	-
"Clause 5.2 Table 1(vii)"("Elongation at break of fabric, percent:")	-	0	-
"Clause 5.2 Table 1(viii)"("Ash content, Max, percent")	-	0	-
Clause 5.3(Lamination with a thin film of polypropylene)	-	0	-
Clause 7.3(Marking on Sacks)	-	0	-

31 Dec, 2026

-
Included w.e.f. 15.07.2024

9274

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 10577 (1982)

Specification for lancing pipes

Light/Medium/Heavy

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6 .1 Table 1,2,3(Dimensions)	-	200	-
6 .1 Table 1,2,3( 1) Outside diameter )	-	200	-
6 .1 Table 1,2,3(2) Thickness,mm)	-	200	-
7 Table 1,2,3( 2)Mass,kg/m)	-	200	-
6 .1 Table 4(3)Socket dimension)	-	200	-
6 .1 Table 4( i)OD,mm)	-	200	-
6 .1 Table 4( ii)Length.mm)	-	200	-
12.1(12. HYDRAULIC TEST)	-	3500	-
13.0(13. TEST ON FINISHED PIPES AND SOCKETS)	-	200	-
13.2(i)Tensile strength,, Mpa Min)	-	2000	-
13.2(ii)Elongation,% Min)	-	1000	-
13.1(Bend Test)	-	1500	-
13.4( Expansion Test on Sockets)	-	1500	-
13.4.1( 1)Drift Expanding Test)	-	1500	-
13.4.2( ii)Taper Screw Plug irest)	-	900	-
14.1(Workmanship)	-	100	-
18.0(Coating )	-	1500	-
6 .1 Table 1,2,3(Dimensions)	-	200	-
6 .1 Table 1,2,3( 1) Outside diameter )	-	200	-
6 .1 Table 1,2,3(2) Thickness,mm)	-	200	-
7 Table 1,2,3( 2)Mass,kg/m)	-	200	-
6 .1 Table 4(3)Socket dimension)	-	200	-
6 .1 Table 4( i)OD,mm)	-	200	-
6 .1 Table 4( ii)Length.mm)	-	200	-
12.1(12. HYDRAULIC TEST)	-	3500	-
13.0(13. TEST ON FINISHED PIPES AND SOCKETS)	-	200	-
13.2(i)Tensile strength,, Mpa Min)	-	2000	-
13.2(ii)Elongation,% Min)	-	1000	-
13.1(Bend Test)	-	1500	-
13.4( Expansion Test on Sockets)	-	1500	-
13.4.1( 1)Drift Expanding Test)	-	1500	-
13.4.2( ii)Taper Screw Plug irest)	-	900	-
14.1(Workmanship)	-	100	-
18.0(Coating )	-	1500	-
6 .1 Table 1,2,3(Dimensions)	-	200	-
6 .1 Table 1,2,3( 1) Outside diameter )	-	200	-
6 .1 Table 1,2,3(2) Thickness,mm)	-	200	-
7 Table 1,2,3( 2)Mass,kg/m)	-	200	-
6 .1 Table 4(3)Socket dimension)	-	200	-
6 .1 Table 4( i)OD,mm)	-	200	-
6 .1 Table 4( ii)Length.mm)	-	200	-
12.1(12. HYDRAULIC TEST)	-	3500	-
13.0(13. TEST ON FINISHED PIPES AND SOCKETS)	-	200	-
13.2(i)Tensile strength,, Mpa Min)	-	2000	-
13.2(ii)Elongation,% Min)	-	1000	-
13.1(Bend Test)	-	1500	-
13.4( Expansion Test on Sockets)	-	1500	-
13.4.1( 1)Drift Expanding Test)	-	1500	-
13.4.2( ii)Taper Screw Plug irest)	-	900	-
14.1(Workmanship)	-	100	-
18.0(Coating )	-	1500	-
6 .1 Table 1,2,3(Dimensions)	-	200	-
6 .1 Table 1,2,3( 1) Outside diameter )	-	200	-
6 .1 Table 1,2,3(2) Thickness,mm)	-	200	-
7 Table 1,2,3( 2)Mass,kg/m)	-	200	-
6 .1 Table 4(3)Socket dimension)	-	200	-
6 .1 Table 4( i)OD,mm)	-	200	-
6 .1 Table 4( ii)Length.mm)	-	200	-
12.1(12. HYDRAULIC TEST)	-	3500	-
13.0(13. TEST ON FINISHED PIPES AND SOCKETS)	-	200	-
13.2(i)Tensile strength,, Mpa Min)	-	2000	-
13.2(ii)Elongation,% Min)	-	1000	-
13.1(Bend Test)	-	1500	-
13.4( Expansion Test on Sockets)	-	1500	-
13.4.1( 1)Drift Expanding Test)	-	1500	-
13.4.2( ii)Taper Screw Plug irest)	-	900	-
14.1(Workmanship)	-	100	-
18.0(Coating )	-	1500	-

-
Included w.e.f. 02.07.2024.

9275

GIGA LABS, BENGALURU

6177526

IS/IEC 60947 : PART 3 (2012)

Low - Voltage switchgear and controlgear: Part 3 switches, disconnectors, switch disconnectors and fuse - Combination units (First Revision)

545000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.3.3.1(Temperature-rise)	-	150000	-
8.3.3.1(Temperature-rise)	-	150000	-
8.3.3.1(Temperature-rise)	-	150000	-
8.3.3.1(Temperature-rise)	-	150000	-
8.3.3.1(Temperature-rise)	-	150000	-
8.3.3.2(Test of dielectric properties)	-	150000	-
8.3.3.2(Test of dielectric properties)	-	150000	-
8.3.3.2(Test of dielectric properties)	-	150000	-
8.3.3.2(Test of dielectric properties)	-	150000	-
8.3.3.4(Dielectric verification)	-	150000	-
8.3.3.5(Leakage current)	-	150000	-
8.3.3.6(Temperature-rise verification)	-	150000	-
8.3.3.6(Temperature-rise verification)	-	150000	-
8.3.3.6(Temperature-rise verification)	-	150000	-
8.3.3.6(Temperature-rise verification)	-	150000	-
8.3.3.6(Temperature-rise verification)	-	150000	-
8.3.3.6(Temperature-rise verification)	-	150000	-
8.3.3.6(Temperature-rise verification)	-	150000	-
8.3.3.7(Strength of actuator mechanism)	-	150000	-
8.3.3.7(Strength of actuator mechanism)	-	150000	-
8.3.4.1.5(Operational performance test)	-	250000	-
8.3.4.1.6(Operational performance test)	-	250000	-
8.3.4.2(Dielectric verification)	-	250000	-
8.3.4.3(Leakage current)	-	250000	-
8.3.4.4(Temperature-rise verification)	-	250000	-
8.3.4.4(Temperature-rise verification)	-	250000	-
8.3.4.4(Temperature-rise verification)	-	250000	-
8.3.4.4(Temperature-rise verification)	-	250000	-
8.3.4.4(Temperature-rise verification)	-	250000	-
8.3.4.4(Temperature-rise verification)	-	250000	-
8.3.4.4(Temperature-rise verification)	-	250000	-
8.3.5.3(Dielectric verification)	-	45000	-
8.3.5.4(Leakage current)	-	45000	-
8.3.5.5(Temperature-rise verification)	-	45000	-
8.3.5.5(Temperature-rise verification)	-	45000	-
8.3.5.5(Temperature-rise verification)	-	45000	-
8.3.5.5(Temperature-rise verification)	-	45000	-
8.3.5.5(Temperature-rise verification)	-	45000	-
8.3.5.5(Temperature-rise verification)	-	45000	-
8.3.5.5(Temperature-rise verification)	-	45000	-
8.3.6.3(Dielectric verification)	-	45000	-
8.3.6.4(Leakage current)	-	45000	-
8.3.6.5(Temperature-rise verification)	-	45000	-
8.3.6.5(Temperature-rise verification)	-	45000	-
8.3.6.5(Temperature-rise verification)	-	45000	-
8.3.6.5(Temperature-rise verification)	-	45000	-
8.3.6.5(Temperature-rise verification)	-	45000	-
8.3.6.5(Temperature-rise verification)	-	45000	-
8.3.6.5(Temperature-rise verification)	-	45000	-
8.3.7.1(Overload test)	-	55000	-
8.3.7.2(Dielectric verification)	-	55000	-
8.3.7.3(Leakage current)	-	55000	-
8.3.7.4(Temperature-rise verification)	-	5000	-
8.3.7.4(Temperature-rise verification)	-	5000	-
8.3.7.4(Temperature-rise verification)	-	5000	-
8.3.7.4(Temperature-rise verification)	-	5000	-
8.3.7.4(Temperature-rise verification)	-	5000	-
8.3.7.4(Temperature-rise verification)	-	5000	-
8.3.7.4(Temperature-rise verification)	-	5000	-
8.3.3.1(Temperature-rise)	-	5000	-
8.3.3.1(Temperature-rise)	-	5000	-
8.3.3.1(Temperature-rise)	-	5000	-
8.3.3.1(Temperature-rise)	-	5000	-
8.3.3.1(Temperature-rise)	-	5000	-
8.3.3.2(Test of dielectric properties)	-	5000	-
8.3.3.2(Test of dielectric properties)	-	5000	-
8.3.3.2(Test of dielectric properties)	-	5000	-
8.3.3.2(Test of dielectric properties)	-	5000	-
8.3.3.4(Dielectric verification)	-	5000	-
8.3.3.5(Leakage current)	-	5000	-
8.3.3.6(Temperature-rise verification)	-	5000	-
8.3.3.6(Temperature-rise verification)	-	5000	-
8.3.3.6(Temperature-rise verification)	-	5000	-
8.3.3.6(Temperature-rise verification)	-	5000	-
8.3.3.6(Temperature-rise verification)	-	5000	-
8.3.3.6(Temperature-rise verification)	-	5000	-
8.3.3.6(Temperature-rise verification)	-	5000	-
8.3.3.7(Strength of actuator mechanism)	-	150000	-
8.3.3.7(Strength of actuator mechanism)	-	150000	-
8.3.4.1.5(Operational performance test)	-	250000	-
8.3.4.1.6(Operational performance test)	-	250000	-
8.3.4.2(Dielectric verification)	-	250000	-
8.3.4.3(Leakage current)	-	250000	-
8.3.4.4(Temperature-rise verification)	-	5000	-
8.3.4.4(Temperature-rise verification)	-	5000	-
8.3.4.4(Temperature-rise verification)	-	5000	-
8.3.4.4(Temperature-rise verification)	-	5000	-
8.3.4.4(Temperature-rise verification)	-	5000	-
8.3.4.4(Temperature-rise verification)	-	5000	-
8.3.4.4(Temperature-rise verification)	-	5000	-
8.3.5.3(Dielectric verification)	-	5000	-
8.3.5.4(Leakage current)	-	5000	-
8.3.5.5(Temperature-rise verification)	-	5000	-
8.3.5.5(Temperature-rise verification)	-	5000	-
8.3.5.5(Temperature-rise verification)	-	5000	-
8.3.5.5(Temperature-rise verification)	-	5000	-
8.3.5.5(Temperature-rise verification)	-	5000	-
8.3.5.5(Temperature-rise verification)	-	5000	-
8.3.5.5(Temperature-rise verification)	-	5000	-
8.3.6.3(Dielectric verification)	-	5000	-
8.3.6.4(Leakage current)	-	5000	-
8.3.6.5(Temperature-rise verification)	-	5000	-
8.3.6.5(Temperature-rise verification)	-	5000	-
8.3.6.5(Temperature-rise verification)	-	5000	-
8.3.6.5(Temperature-rise verification)	-	5000	-
8.3.6.5(Temperature-rise verification)	-	5000	-
8.3.6.5(Temperature-rise verification)	-	5000	-
8.3.6.5(Temperature-rise verification)	-	5000	-
8.3.7.1(Overload test)	-	55000	-
8.3.7.2(Dielectric verification)	-	55000	-
8.3.7.3(Leakage current)	-	55000	-
8.3.7.4(Temperature-rise verification)	-	55000	-
8.3.7.4(Temperature-rise verification)	-	55000	-
8.3.7.4(Temperature-rise verification)	-	55000	-
8.3.7.4(Temperature-rise verification)	-	55000	-
8.3.7.4(Temperature-rise verification)	-	55000	-
8.3.7.4(Temperature-rise verification)	-	55000	-
8.3.7.4(Temperature-rise verification)	-	55000	-
3.1(Classification)	-	2000	-
3.2(Classification)	-	2000	-
3.3(Classification)	-	2000	-
3.3(Classification)	-	2000	-
4.1(Characteristics)	-	2000	-
4.2(Characteristics)	-	2000	-
4.3(Characteristics)	-	2000	-
4.3.1.1(Characteristics)	-	2000	-
4.3.1.2(Characteristics)	-	2000	-
4.3.1.3(Characteristics)	-	2000	-
4.3.2(Characteristics)	-	2000	-
4.3.2.1(Characteristics)	-	2000	-
4.3.2.2(Characteristics)	-	2000	-
4.3.2.3(Characteristics)	-	2000	-
4.3.2.4(Characteristics)	-	2000	-
4..3.3(Characteristics)	-	2000	-
4..3.4(Characteristics)	-	2000	-
4..3.4.1(Characteristics)	-	2000	-
4..3.4.2(Characteristics)	-	2000	-
4.3.5.1(Characteristics)	-	2000	-
4.3.5.2(Characteristics)	-	2000	-
4.3.5.3(Characteristics)	-	2000	-
4.3.6.1(Characteristics)	-	2000	-
4.3.6.2(Characteristics)	-	2000	-
4.3.6.4(Characteristics)	-	2000	-
4.4(Characteristics)	-	2000	-
4.5(Characteristics)	-	2000	-
4.6(Characteristics)	-	2000	-
4.7(Characteristics)	-	2000	-
4.8(Characteristics)	-	2000	-
5.1(Product information)	-	10000	-
5.2(Product information)	-	10000	-
5.2.3(Product information)	-	10000	-
5.2.4(Product information)	-	10000	-
8.2.1.1.1(Test of resistance to abnormal heat and fire)	-	30000	-
8.4(Electromagnetic compatibility tests)	-	18000	-
8.4.1.2(Immunity (Equipment incorporating electronic circuits))	-	18000	-
8.4.1.2(Immunity (Equipment incorporating electronic circuits))	-	18000	-
8.4.1.2(Immunity (Equipment incorporating electronic circuits))	-	18000	-
8.4.1.2(Immunity (Equipment incorporating electronic circuits))	-	18000	-
8.4.1.2(Immunity (Equipment incorporating electronic circuits))	-	18000	-
8.4.2.2(Emission (Equipment incorporating electronic circuits ))	-	18000	-
8.5.1(Mechanical durability)	-	50000	-
8.5.2(Electrical durability)	-	300000	-
7.1(Constructional Requirements (except those covered under type tests))	-	18000	-
7.3.2(Electrostatic discharge)	-	18000	-
7.3.2(Electrostatic discharge)	-	18000	-
7.3.2(Radiated RF Electromagnetic Field)	-	18000	-
7.3.2(Fast transient/ burst)	-	18000	-
7.3.2(Surge)	-	18000	-
7.3.2(Conducted disturbances induced by RF fields)	-	18000	-
7.3.2(Emission)	-	18000	-
8.3.3.1(Temperature-rise)	-	5000	-
8.3.3.1(Temperature-rise)	-	5000	-
8.3.3.1(Temperature-rise)	-	5000	-
8.3.3.1(Temperature-rise)	-	5000	-
8.3.3.1(Temperature-rise)	-	5000	-
8.3.3.2(Test of dielectric properties)	-	5000	-
8.3.3.2(Test of dielectric properties)	-	5000	-
8.3.3.2(Test of dielectric properties)	-	5000	-
8.3.3.2(Test of dielectric properties)	-	5000	-
8.3.3.4(Dielectric verification)	-	5000	-
8.3.3.5(Leakage current)	-	5000	-
8.3.3.6(Temperature-rise verification)	-	5000	-
8.3.3.6(Temperature-rise verification)	-	5000	-
8.3.3.6(Temperature-rise verification)	-	5000	-
8.3.3.6(Temperature-rise verification)	-	5000	-
8.3.3.6(Temperature-rise verification)	-	5000	-
8.3.3.6(Temperature-rise verification)	-	5000	-
8.3.3.6(Temperature-rise verification)	-	5000	-
8.3.3.7(Strength of actuator mechanism)	-	5000	-
8.3.3.7(Strength of actuator mechanism)	-	5000	-
8.3.4.1.5(Operational performance test)	-	25000	-
8.3.4.1.6(Operational performance test)	-	6250	-
8.3.4.2(Dielectric verification)	-	6250	-
8.3.4.3(Leakage current)	-	6250	-
8.3.4.4(Temperature-rise verification)	-	5000	-
8.3.4.4(Temperature-rise verification)	-	5000	-
8.3.4.4(Temperature-rise verification)	-	5000	-
8.3.4.4(Temperature-rise verification)	-	5000	-
8.3.4.4(Temperature-rise verification)	-	5000	-
8.3.4.4(Temperature-rise verification)	-	5000	-
8.3.4.4(Temperature-rise verification)	-	5000	-
8.3.5.3(Dielectric verification)	-	5000	-
8.3.5.4(Leakage current)	-	5000	-
8.3.5.5(Temperature-rise verification)	-	5000	-
8.3.5.5(Temperature-rise verification)	-	5000	-
8.3.5.5(Temperature-rise verification)	-	5000	-
8.3.5.5(Temperature-rise verification)	-	5000	-
8.3.5.5(Temperature-rise verification)	-	5000	-
8.3.5.5(Temperature-rise verification)	-	5000	-
8.3.5.5(Temperature-rise verification)	-	5000	-
8.3.6.3(Dielectric verification)	-	5000	-
8.3.6.4(Leakage current)	-	5000	-
8.3.6.5(Temperature-rise verification)	-	5000	-
8.3.6.5(Temperature-rise verification)	-	5000	-
8.3.6.5(Temperature-rise verification)	-	5000	-
8.3.6.5(Temperature-rise verification)	-	5000	-
8.3.6.5(Temperature-rise verification)	-	5000	-
8.3.6.5(Temperature-rise verification)	-	5000	-
8.3.6.5(Temperature-rise verification)	-	5000	-
8.3.7.1(Overload test)	-	13750	-
8.3.7.2(Dielectric verification)	-	13750	-
8.3.7.3(Leakage current)	-	13750	-
8.3.7.4(Temperature-rise verification)	-	5000	-
8.3.7.4(Temperature-rise verification)	-	5000	-
8.3.7.4(Temperature-rise verification)	-	5000	-
8.3.7.4(Temperature-rise verification)	-	5000	-
8.3.7.4(Temperature-rise verification)	-	5000	-
8.3.7.4(Temperature-rise verification)	-	5000	-
8.3.7.4(Temperature-rise verification)	-	5000	-
3.1(Classification)	-	2000	-
3.2(Classification)	-	2000	-
3.3(Classification)	-	2000	-
3.3(Classification)	-	2000	-
4.1(Characteristics)	-	2000	-
4.2(Characteristics)	-	2000	-
4.3(Characteristics)	-	2000	-
4.3.1.1(Characteristics)	-	2000	-
4.3.1.2(Characteristics)	-	2000	-
4.3.1.3(Characteristics)	-	2000	-
4.3.2(Characteristics)	-	2000	-
4.3.2.1(Characteristics)	-	2000	-
4.3.2.2(Characteristics)	-	2000	-
4.3.2.3(Characteristics)	-	2000	-
4.3.2.4(Characteristics)	-	2000	-
4..3.3(Characteristics)	-	2000	-
4..3.4(Characteristics)	-	2000	-
4..3.4.1(Characteristics)	-	2000	-
4..3.4.2(Characteristics)	-	2000	-
4.3.5.1(Characteristics)	-	2000	-
4.3.5.2(Characteristics)	-	2000	-
4.3.5.3(Characteristics)	-	2000	-
4.3.6.1(Characteristics)	-	2000	-
4.3.6.2(Characteristics)	-	2000	-
4.3.6.4(Characteristics)	-	2000	-
4.4(Characteristics)	-	2000	-
4.5(Characteristics)	-	2000	-
4.6(Characteristics)	-	2000	-
4.7(Characteristics)	-	2000	-
4.8(Characteristics)	-	2000	-
5.1(Product information)	-	10000	-
5.2(Product information)	-	10000	-
5.2.3(Product information)	-	10000	-
5.2.4(Product information)	-	10000	-
8.2.1.1.1(Test of resistance to abnormal heat and fire)	-	30000	-
8.4(Electromagnetic compatibility tests)	-	18000	-
8.4.1.2(Immunity (Equipment incorporating electronic circuits))	-	18000	-
8.4.1.2(Immunity (Equipment incorporating electronic circuits))	-	18000	-
8.4.1.2(Immunity (Equipment incorporating electronic circuits))	-	18000	-
8.4.1.2(Immunity (Equipment incorporating electronic circuits))	-	18000	-
8.4.1.2(Immunity (Equipment incorporating electronic circuits))	-	18000	-
8.4.2.2(Emission (Equipment incorporating electronic circuits ))	-	18000	-
8.5.1(Mechanical durability)	-	50000	-
8.5.2(Electrical durability)	-	30000	-
7.1(Constructional Requirements (except those covered under type tests))	-	18000	-
7.3.2(Electrostatic discharge)	-	18000	-
7.3.2(Electrostatic discharge)	-	18000	-
7.3.2(Radiated RF Electromagnetic Field)	-	18000	-
7.3.2(Fast transient/ burst)	-	18000	-
7.3.2(Surge)	-	18000	-
7.3.2(Conducted disturbances induced by RF fields)	-	27000	-
7.3.2(Emission)	-	18000	-
8.2.1.1.2(Test of resistance to abnormal heat and fire)	-	30000	-
8.2.3(Enclosures for equipment)	-	25000	-
8.2.4(Mechanical properties of terminals)	-	25000	-
8.2.4.2(Tests of mechanical strength of terminals)	-	25000	-
8.2.4.3(Testing for damage to and accidental loosening of conductors (flexion test))	-	25000	-
8.2.4.4.1(Pull-out test)	-	25000	-
8.2.4.4.2(Flat copper conductors)	-	25000	-
8.1.3.2(Mechanical operation test)	-	25000	-
8.1.3.3(Dielectric test)	-	25000	-
8.1.4(Sampling tests)	-	10000	-
8.3.3.1(Temperature-rise)	-	5000	-
8.3.3.1(Temperature-rise)	-	5000	-
8.3.3.1(Temperature-rise)	-	5000	-
8.3.3.1(Temperature-rise)	-	5000	-
8.3.3.1(Temperature-rise)	-	5000	-
8.3.3.2(Test of dielectric properties)	-	5000	-
8.3.3.2(Test of dielectric properties)	-	5000	-
8.3.3.2(Test of dielectric properties)	-	5000	-
8.3.3.2(Test of dielectric properties)	-	5000	-
8.3.3.4(Dielectric verification)	-	5000	-
8.3.3.5(Leakage current)	-	5000	-
8.3.3.6(Temperature-rise verification)	-	5000	-
8.3.3.6(Temperature-rise verification)	-	5000	-
8.3.3.6(Temperature-rise verification)	-	5000	-
8.3.3.6(Temperature-rise verification)	-	5000	-
8.3.3.6(Temperature-rise verification)	-	5000	-
8.3.3.6(Temperature-rise verification)	-	5000	-
8.3.3.6(Temperature-rise verification)	-	5000	-
8.3.3.7(Strength of actuator mechanism)	-	5000	-
8.3.3.7(Strength of actuator mechanism)	-	5000	-
8.3.4.1.5(Operational performance test)	-	5000	-
8.3.4.1.6(Operational performance test)	-	5000	-
8.3.4.2(Dielectric verification)	-	5000	-
8.3.4.3(Leakage current)	-	5000	-
8.3.4.4(Temperature-rise verification)	-	5000	-
8.3.4.4(Temperature-rise verification)	-	5000	-
8.3.4.4(Temperature-rise verification)	-	5000	-
8.3.4.4(Temperature-rise verification)	-	5000	-
8.3.4.4(Temperature-rise verification)	-	5000	-
8.3.4.4(Temperature-rise verification)	-	5000	-
8.3.4.4(Temperature-rise verification)	-	5000	-
8.3.5.3(Dielectric verification)	-	5000	-
8.3.5.4(Leakage current)	-	5000	-
8.3.5.5(Temperature-rise verification)	-	5000	-
8.3.5.5(Temperature-rise verification)	-	5000	-
8.3.5.5(Temperature-rise verification)	-	5000	-
8.3.5.5(Temperature-rise verification)	-	5000	-
8.3.5.5(Temperature-rise verification)	-	5000	-
8.3.5.5(Temperature-rise verification)	-	5000	-
8.3.5.5(Temperature-rise verification)	-	5000	-
8.3.6.3(Dielectric verification)	-	5000	-
8.3.6.4(Leakage current)	-	5000	-
8.3.6.5(Temperature-rise verification)	-	5000	-
8.3.6.5(Temperature-rise verification)	-	5000	-
8.3.6.5(Temperature-rise verification)	-	5000	-
8.3.6.5(Temperature-rise verification)	-	5000	-
8.3.6.5(Temperature-rise verification)	-	5000	-
8.3.6.5(Temperature-rise verification)	-	5000	-
8.3.6.5(Temperature-rise verification)	-	5000	-
8.3.7.1(Overload test)	-	5000	-
8.3.7.2(Dielectric verification)	-	5000	-
8.3.7.3(Leakage current)	-	5000	-
8.3.7.4(Temperature-rise verification)	-	5000	-
8.3.7.4(Temperature-rise verification)	-	5000	-
8.3.7.4(Temperature-rise verification)	-	5000	-
8.3.7.4(Temperature-rise verification)	-	5000	-
8.3.7.4(Temperature-rise verification)	-	5000	-
8.3.7.4(Temperature-rise verification)	-	5000	-
8.3.7.4(Temperature-rise verification)	-	5000	-
3.1(Classification)	-	5000	-
3.2(Classification)	-	5000	-
3.3(Classification)	-	5000	-
3.3(Classification)	-	5000	-
4.1(Characteristics)	-	5000	-
4.2(Characteristics)	-	5000	-
4.3(Characteristics)	-	5000	-
4.3.1.1(Characteristics)	-	5000	-
4.3.1.2(Characteristics)	-	5000	-
4.3.1.3(Characteristics)	-	5000	-
4.3.2(Characteristics)	-	5000	-
4.3.2.1(Characteristics)	-	5000	-
4.3.2.2(Characteristics)	-	5000	-
4.3.2.3(Characteristics)	-	5000	-
4.3.2.4(Characteristics)	-	5000	-
4..3.3(Characteristics)	-	5000	-
4..3.4(Characteristics)	-	5000	-
4..3.4.1(Characteristics)	-	5000	-
4..3.4.2(Characteristics)	-	5000	-
4.3.5.1(Characteristics)	-	5000	-
4.3.5.2(Characteristics)	-	5000	-
4.3.5.3(Characteristics)	-	5000	-
4.3.6.1(Characteristics)	-	5000	-
4.3.6.2(Characteristics)	-	5000	-
4.3.6.4(Characteristics)	-	5000	-
4.4(Characteristics)	-	5000	-
4.5(Characteristics)	-	5000	-
4.6(Characteristics)	-	5000	-
4.7(Characteristics)	-	5000	-
4.8(Characteristics)	-	5000	-
5.1(Product information)	-	5000	-
5.2(Product information)	-	5000	-
5.2.3(Product information)	-	5000	-
5.2.4(Product information)	-	5000	-
8.2.1.1.1(Test of resistance to abnormal heat and fire)	-	5000	-
8.4(Electromagnetic compatibility tests)	-	5000	-
8.4.1.2(Immunity (Equipment incorporating electronic circuits))	-	5000	-
8.4.1.2(Immunity (Equipment incorporating electronic circuits))	-	5000	-
8.4.1.2(Immunity (Equipment incorporating electronic circuits))	-	5000	-
8.4.1.2(Immunity (Equipment incorporating electronic circuits))	-	5000	-
8.4.1.2(Immunity (Equipment incorporating electronic circuits))	-	5000	-
8.4.2.2(Emission (Equipment incorporating electronic circuits ))	-	5000	-
8.5.1(Mechanical durability)	-	5000	-
8.5.2(Electrical durability)	-	5000	-
7.1(Constructional Requirements (except those covered under type tests))	-	5000	-
7.3.2(Electrostatic discharge)	-	5000	-
7.3.2(Electrostatic discharge)	-	5000	-
7.3.2(Radiated RF Electromagnetic Field)	-	5000	-
7.3.2(Fast transient/ burst)	-	5000	-
7.3.2(Surge)	-	5000	-
7.3.2(Conducted disturbances induced by RF fields)	-	5000	-
7.3.2(Emission)	-	5000	-
8.2.1.1.2(Test of resistance to abnormal heat and fire)	-	5000	-
8.2.3(Enclosures for equipment)	-	5000	-
8.2.4(Mechanical properties of terminals)	-	5000	-
8.2.4.2(Tests of mechanical strength of terminals)	-	5000	-
8.2.4.3(Testing for damage to and accidental loosening of conductors (flexion test))	-	5000	-
8.2.4.4.1(Pull-out test)	-	5000	-
8.2.4.4.2(Flat copper conductors)	-	5000	-
8.1.3.2(Mechanical operation test)	-	5000	-
8.1.3.3(Dielectric test)	-	5000	-
8.1.4(Sampling tests)	-	5000	-

-
Included w.e.f. 05.08.2024 Exclusion: Cl. 8.3.3.3 (Making and breaking capacities), Cl. 8.3.3.7 (Strength of actuator mechanism), Cl. 8.3.5.1 ( Short-time withstand current test), Cl. 8.3.5.2 (Short-circuit making capacity test), Cl. 8.3.6.2, 1 a) (Fuse protected short-circuit withstand), 8.3.6.2, 1 b) (Fuse protected short-circuit making), Cl. 8.3.3.3.5 (Behaviour of equipment during making and breaking capacity tests), Cl. 8.3.3.3.6 (Condition of equipment after the making and breaking capacity tests)

9276

Classic Instrumentation Pvt. Ltd. (8135126), Noida

8135126

IS 302 : Part 2 : Sec 7 (2024)

Safety of Household And Similar Electrical Appliances Part 2 Particular Requirements Section 7: Domestic Electric Clothes Washing Machines

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(GENERAL REQUIREMENT)	-	1650	20% discount to bIs
6(CLASSIFICATION)	-	1650	20% discount to bIs
7(MARKING AND INSTRUCTIONS)	-	1650	20% discount to bIs
8(PROTECTION AGAINST ACCESS TO LIVE PARTS)	-	1650	20% discount to bIs
10(POWER INPUT AND CURRENT)	-	1650	20% discount to bIs
11(HEATING)	-	1650	20% discount to bIs
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	1650	20% discount to bIs
14(TRANSIENT OVERVOLTAGES)	-	1650	20% discount to bIs
15(MOISTURE RESISTANCE)	-	1650	20% discount to bIs
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	1650	20% discount to bIs
17("OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS ")	-	1650	20% discount to bIs
17("OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS ")	-	1650	20% discount to bIs
18(ENDURANCE)	-	1650	20% discount to bIs
19(ABNORMAL OPERATION)	-	1650	20% discount to bIs
20(STABILITY AND MECHANICAL HAZARDS)	-	1650	20% discount to bIs
21(MECHANICAL STRENGTH)	-	1650	20% discount to bIs
22(CONSTRUCTION)	-	1650	20% discount to bIs
23(INTERNAL WIRING)	-	1650	20% discount to bIs
24(COMPONENTS)	-	1650	20% discount to bIs
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	1650	20% discount to bIs
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	1650	20% discount to bIs
27(PROVISION FOR EARTHING)	-	1650	20% discount to bIs
28(SCREWS AND CONNECTIONS)	-	1650	20% discount to bIs
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	1650	20% discount to bIs
30(RESISTANCE TO HEAT AND FIRE)	-	1650	20% discount to bIs
31(RESISTANCE TO RUSTING)	-	1650	20% discount to bIs
19.13(ABNORMAL OPERATION)	-	1650	20% discount to bIs
19.101(Abnormal Operation)	-	1650	20% discount to bIs
19.102(Abnormal Operation)	-	1650	20% discount to bIs
19.11.4.4(Surge immunity test)	-	2650	20% discount to bIs
4(GENERAL REQUIREMENT)	-	1650	20% discount to bIs
6(CLASSIFICATION)	-	1650	20% discount to bIs
7(MARKING AND INSTRUCTIONS)	-	1650	20% discount to bIs
8(PROTECTION AGAINST ACCESS TO LIVE PARTS)	-	1650	20% discount to bIs
10(POWER INPUT AND CURRENT)	-	1650	20% discount to bIs
11(HEATING)	-	1650	20% discount to bIs
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	1650	20% discount to bIs
14(TRANSIENT OVERVOLTAGES)	-	1650	20% discount to bIs
15(MOISTURE RESISTANCE)	-	1650	20% discount to bIs
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	1650	20% discount to bIs
17("OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS ")	-	1650	20% discount to bIs
17("OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS ")	-	1650	20% discount to bIs
18(ENDURANCE)	-	1650	20% discount to bIs
19(ABNORMAL OPERATION)	-	1650	20% discount to bIs
20(STABILITY AND MECHANICAL HAZARDS)	-	1650	20% discount to bIs
21(MECHANICAL STRENGTH)	-	1650	20% discount to bIs
22(CONSTRUCTION)	-	1650	20% discount to bIs
23(INTERNAL WIRING)	-	1650	20% discount to bIs
24(COMPONENTS)	-	1650	20% discount to bIs
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	1650	20% discount to bIs
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	1650	20% discount to bIs
27(PROVISION FOR EARTHING)	-	1650	20% discount to bIs
28(SCREWS AND CONNECTIONS)	-	1650	20% discount to bIs
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	1650	20% discount to bIs
30(RESISTANCE TO HEAT AND FIRE)	-	1650	20% discount to bIs
31(RESISTANCE TO RUSTING)	-	1650	20% discount to bIs
19.13(ABNORMAL OPERATION)	-	1650	20% discount to bIs
19.101(Abnormal Operation)	-	1650	20% discount to bIs
19.102(Abnormal Operation)	-	1650	20% discount to bIs
19.11.4.4(Surge immunity test)	-	1650	20% discount to bIs
4(GENERAL REQUIREMENT)	-	1650	20% discount to bIs
6(CLASSIFICATION)	-	1650	20% discount to bIs
7(MARKING AND INSTRUCTIONS)	-	1650	20% discount to bIs
8(PROTECTION AGAINST ACCESS TO LIVE PARTS)	-	1650	20% discount to bIs
10(POWER INPUT AND CURRENT)	-	1650	20% discount to bIs
11(HEATING)	-	1650	20% discount to bIs
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	1650	20% discount to bIs
14(TRANSIENT OVERVOLTAGES)	-	1650	20% discount to bIs
15(MOISTURE RESISTANCE)	-	1650	20% discount to bIs
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	1650	20% discount to bIs
17("OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS ")	-	1650	20% discount to bIs
17("OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS ")	-	1650	20% discount to bIs
18(ENDURANCE)	-	1650	20% discount to bIs
19(ABNORMAL OPERATION)	-	1650	20% discount to bIs
20(STABILITY AND MECHANICAL HAZARDS)	-	1650	20% discount to bIs
21(MECHANICAL STRENGTH)	-	1650	20% discount to bIs
22(CONSTRUCTION)	-	1650	20% discount to bIs
23(INTERNAL WIRING)	-	1650	20% discount to bIs
24(COMPONENTS)	-	1650	20% discount to bIs
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	1650	20% discount to bIs
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	1650	20% discount to bIs
27(PROVISION FOR EARTHING)	-	1650	20% discount to bIs
28(SCREWS AND CONNECTIONS)	-	1650	20% discount to bIs
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	1650	20% discount to bIs
30(RESISTANCE TO HEAT AND FIRE)	-	1650	20% discount to bIs
31(RESISTANCE TO RUSTING)	-	1650	20% discount to bIs
19.13(ABNORMAL OPERATION)	-	1650	20% discount to bIs
19.101(Abnormal Operation)	-	1650	20% discount to bIs
19.102(Abnormal Operation)	-	1650	20% discount to bIs
19.11.4.4(Surge immunity test)	-	1650	20% discount to bIs

23 Oct, 2028

-
including w.e.f 09.10.2024 Exclusion: 19.11.4.1 (Electrostatic discharges) 19.11.4.2 (Radiated fields) 19.11.4.3 (Fast transient bursts) 19.11.4.5 (Immunity to conducted discharges) 19.11.4.6 (Class 3 Voltage dips and interruptions) 19.11.4.7 (Harmonics)

9277

BIS, Eastern Regional Laboratory (ERL)

None

IS 10702 (2023)

Hawai Chappal-Specification

For all type

Please check remarks View breakup
Mechanical- Rs. 9965, Chemical- Rs. 20400

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.No. 5.2 (lead content)	-
Cl.4.4 - Table No 1 - Sl. No.-viii ("Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988")	-
Clause 4.1 - 4.1.1 (Bottom Material)	-
Clause 4.1 - 4.1.2 (Strap Material)	-
Clause 4.1 - 4.1.3 (Material)	-
Cl-4.4, Table -1 S. No-1 (i) (Amendment No-1) (Compression set at constant stress)	-
Cl-4.4, Table -1 S. No-1 (ii) (Amendment No-1) (Split tear strength)	-
Cl-4.4, Table -1 S. No-1 (iii) (a)(Amendment No-1) ("Shrinkage at Shrinkage at 50 °C ± 1 °C for 2 h for polymeric material, percent, Max ")	-
Cl-4.4, Table -1 S. No-1 (iv) (Amendment No-1) (Abrasion resistance at applied force)	-
Cl-4.4, Table -1 S. No-1 (v) (Amendment No-1) (Flexing resistance: Maximum cut growth,)	-
Cl-4.4, Table -1 S. No-1 (vi) (Amendment No-1) (Hydrolysis resistance:Maximum cut growth)	-
Cl-4.4, Table -2 S. No-1 (i), a (Amendment No-1) ("Breaking strength for Strap to strap 1-Solid strap 2-Cellular strap")	-
Cl-4.4, Table -3 S. No-1 (iii), (Amendment No-1) (Inter layer bond strength)	-
Cl. No.5.1,Table no.1 of IS 17011(i) (Allergenic and carcinogenic disperse dyes)	-
Cl. No.5.1,Table no.1 of IS 17011(ii) (Aromatic amines released from Azo dyes (each individual amine))	-
Cl. No.5.1,Table no.1 of IS 17011(iii) (Aromatic amines released from Azo dyes (each individual amine))	-
Cl. No.5.1,Table no.1 of IS 17011(iv) (Chromium (VI))	-
Cl. No.5.1,Table no.1 of IS 17011(v) (Dimethyl fumarate (DMFU))	-
Cl. No.5.1,Table no.1 of IS 17011(vi) (Formaldehyde (free or released by partial hydrolysis))	-
Cl. No.5.1,Table no.1 of IS 17011(vii) (Formaldehyde)	-
Cl. No.5.1,Table no.1 of IS 17011(viii) (Organotin compounds)	-
Cl. No.5.1,Table no.1 of IS 17011(x) (pH)	-
Cl. No.5.1,Table no.1 of IS 17011(xi) (Phthalates (each individual phthalate))	-
Cl. No.5.1,Table no.1 of IS 17011(xii) (Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-
Cl-4.4, Table -1 S. No-1 (iii)(b) (Amendment No-1) (Shrinkage at 100 °C ± 1 °C for 1 h for rubber, percent, Max)	-
Cl-4.4, Table -2 S. No-1 (i), b (Amendment No-1) ("Breaking strength for Toe portion to strap 1-Solid strap 2-Cellular strap")	-
Cl-4.4, Table -2 S. No-1 (i), c (Amendment No-1) ("Elongation at break , percent, Min 1-Solid strap 2-Cellular strap")	-
Cl-4.4, Table -3 S. No-1 (i), (Amendment No-1) (Toe post attachment strength)	-
Cl-4.4, Table -3 S. No-1 (ii), (Amendment No-1) (Attachment strength of rear strap)	-
4.1 (Material)	-
4.2 (Length)	-
4.3 (Thickness)	-
4.4 , Table No. 1 , i) (Density)	-
4.4 , Table No. 1 , ii) (2Compression set at constant stress)	-
4.4 , Table No. 1 , iii) (3Split tear strength)	-
4.4 , Table No. 1 , iv) ("Shrinkage at 50 ºC ± 1 ºC for 24 h for polymeric material, Shrinkage at 100 ºC ± 1 ºC for 1 h for rubber")	-
4.4 , Table No. 1 , v) (5Abrasion resistance at applied force)	-
4.4 , Table No. 1 , vi) (Flexing resistance: Maximum cut growth at 50 000 flexes)	-
4.4 , Table No. 1 , vii) (7 Hydrolysis resistance, Maximum cut growth at 50 000 flexes)	-
4.4 , Table No . 2 , i) (Density , Solid strap, Cellular strap)	-
4.4 , Table No . 2 , ii) ("Breaking strength , Strap to strap and Toe portion to strap , Elongation at break")	-
4.4 , Table No . 2 , iii) (Minimum cross section of the stud)	-
4.4 , Table No . 2 , iv) (Stud bolt)	-
4.4 , Table No . 3 , i) (Toe post attachment strength)	-
4.4 , Table No . 3 , ii) (Attachment strength of rear strap)	-
4.4 , Table No . 3 , iii) (Inter layer bond strength)	-
6 (MARKING AND PACKING)	-
Clause 4.1 - 4.1.4 (Material)	-
Clause 4.2 (Material)	-
Clause 4.3 - 4.3.1 (Thickness)	-
Clause 4.3 - 4.3.2 (Thickness)	-
Clause 4.4 Table 1 -i) (Density, g/cm3, Min)	-
Clause 4.4 Table 1 -iii) (Split tear strength, kg, Min)	-
Clause 4.4 Table 1 -iv) - a ("Shrinkage at 50 ºC ± 1 ºC for 24 h for polymeric material, percent, Max")	-
Clause 4.4 Table 1 -iv) - b (Shrinkage at 100 ºC ± 1 ºC for 1 h for rubber, percent, Max)	-
Clause 4.4 Table 1 -v) (Abrasion resistance at applied force 5 N)	-
Clause 4.4 Table 2 -i) - a ("Density, g/cm3 Solid strap ")	-
Clause 4.4 Table 2 -i) - b (Density, g/cm3 Cellular strap)	-
Clause 4.4 Table 2 -ii) - a - 1 ("Breaking strength, kgf, Min Strap to strap(Solid Strap)")	-
Clause 4.4 Table 2 -ii) - a - 2 ("Breaking strength, kgf, Min Strap to strap(Cellular Strap)")	-
Clause 4.4 Table 2 -ii) - a - 3 ("Breaking strength, kgf, Min Toe portion to strap(Solid Strap)")	-
Clause 4.4 Table 2 -ii) - a - 4 ("Breaking strength, kgf, Min Toe portion to strap(Cellular Strap)")	-
Clause 4.4 Table 2 -ii) - b - 1 ("Elongation at break, percent (Applicable to strap to strap (V shape) Solid Strap")	-
Clause 4.4 Table 2 -ii) - b - 2 ("Elongation at break, percent (Applicable to strap to strap (V shape) Cellular Strap")	-
Clause 4.4 Table 2 -iii) - a ("Minimum cross section of the stud, mm, Size 1 to 13 (Adult)")	-
Clause 4.4 Table 2 -iii) - b ("Minimum cross section of the stud, mm, Size 3 to 13 (Children)")	-
Clause 4.4 Table 2 -iv) - a ("Stud bolt, mm Diameter/edge to edge length")	-
Clause 4.4 Table 2 -iv) - b ("Stud bolt, mm Thickness")	-
Clause 4.4 Table 3 -i) ("Toe post attachment strength, N, Min")	-
Clause 4.4 Table 3 -ii) ("Attachment strength of rear strap, N, Min")	-
Clause 4.4 Table 3 -iii) ("Inter layer bond strength, N/mm, Min")	-
Cl-4 ((Amendment No-1) (Category And Type)	-
Cl.1.4.1 of IS 17011 (Table B Sl I ) (Phthalate: DINP)	-
Cl.1.4.1 of IS 17011 (Table B Sl II ) (Phthalate:: DNOP)	-
Cl.1.4.1 of IS 17011 (Table B Sl III ) (Phthalate: DEHP)	-
Cl.1.4.1 of IS 17011 (Table B Sl IV ) (Phthalate: DIDP)	-
Cl.1.4.1 of IS 17011 (Table B Sl V) (Phthalate: BBP)	-
Cl.1.4.1 of IS 17011 (Table B Sl VI ) (Phthalate:DBP)	-
Cl.1.4.1 of IS 17011 (Table B Sl VII ) (Phthalate: DIBP)	-
Cl.4.1 (Annex-A Sl I ) (Organotin: Dibutyltin)	-
Cl.4.1 (Annex-A Sl II ) (Organotin: Dibutyltin Dichloride)	-
Cl.4.1 (Annex-A Sl III ) (Organotin: Dioctyltin)	-
Cl.4.1 (Annex-A Sl IV) (Organotin: Monobutyltin)	-
Cl.4.1 (Annex-A Sl V ) (Organotin: Tributyltin)	-
Cl.4.1 (Annex-A Sl VI) (Organotin: Triphenyltin)	-
Cl.4.1 (Annex-A Sl VII ) (Organotin: Monoctyltin)	-
Cl.4.1 (Annex-A Sl VIII) (Organotin: Bis (tributyltin) oxide)	-
Cl.4.1 (Table B-3) (Allergenic and Carcinogenic Disperse Dyes)	-
Cl.4.1 (Table B-1 Sl I) (Aromatic Amines: 4-aminobiphenyl)	-
Cl.4.1 (Table B-1 Sl II) (Aromatic Amines: Benzidine)	-
Cl.4.1 (Table B-1 Sl III) (Aromatic Amines: 4-chloro-o-toluidine)	-
Cl.4.1 (Table B-1 Sl IV) (Aromatic Amines: 2-naphthylamine)	-
Cl.4.1 (Table B-1 Sl V) (Aromatic Amines :o-aminoazotoluene)	-
Cl.4.1 (Table B-1 Sl VI) (Aromatic Amines: 2-amino-4-nitrotoluenem)	-
Cl.4.1 (Table B-1 Sl VII) (Aromatic Amines: p-chloroaniline)	-
Cl.4.1 (Table B-1 Sl VIII) (Aromatic Amines: 2,4-diaminoanisole)	-
Cl.4.1 (Table B-1 Sl IX) (Aromatic Amines : 4,4’- diaminodiphenylmethane:)	-
Cl.4.1 (Table B-1 Sl X) (Aromatic Amines : 3,3’-dichlorobenzidine)	-
Cl.4.1 (Table B-1 Sl XI) (Aromatic Amines : 3,3’-dimethoxybenzidine)	-
Cl.4.1 (Table B-1 Sl XII) (Aromatic Amines : 3,3’-dimethylbenzidine)	-
Cl.4.1 (Table B-1 Sl XIII) (Aromatic Amines: 3,3’-dimethyl-4,4’-diaminodiphenylmethane)	-
Cl.4.1 (Table B-1 Sl XIV) (Aromatic Amines : p-cresidine)	-
Cl.4.1 (Table B-1 Sl XV) (Aromatic Amines : 4,4’-methylene-bis(2-chloroaniline):)	-
Cl.4.1 (Table B-1 Sl XVI) (Aromatic Amines :4,4’-oxydianiline)	-
Cl.4.1 (Table B-1 Sl XVII) (Aromatic Amines:4,4’-thiodianiline)	-
Cl.4.1 (Table B-1 Sl XVIII) (Aromatic Amines :o-toluidine:)	-
Cl.4.1 (Table B-1 Sl XIX) (Aromatic Amines: 2,4-toluylendiamine)	-
Cl.4.1 (Table B-1 Sl XX) (Aromatic Amines: 2,4,5-trimethylaniline)	-
Cl.4.1 (Table B-1 Sl XXI) (Aromatic Amines :2,4-dimethylaniline)	-
Cl.4.1 (Table B-1 Sl XXII) (Aromatic Amines: 2,6-dimethylaniline:)	-
Cl.4.1 (Table B-1 Sl XXIII) (Aromatic Amines :2-methoxyaniline)	-
Cl.4.1 (Table B-1 Sl XXIV) (Aromatic Amines :4-aminoazobenzene)	-
Cl. No.5.1,Table no.1 of IS 17011(ix) (PCP-TeCP-TriCP polychlorophenols)	-

-
Mech- Complete Mech Quantity:- 6 pair + Type of sample and material to be declared, Bottom and Strap material to be declared + Prepared slab for Flexing resistance and Hydrolysis resistance + Prepared test specimen for compression set at constant stress to be provided separately. Chem- Complete Material declaration required for Innocuousness test.

9278

BIS, Eastern Regional Laboratory (ERL)

None

IS 16714 (2018)

Ground granulated blast furnace slag for use in cement, mortar and concrete - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6 and Table 2 i (Fineness IS 4031 (Part 2))	-
6 and Table 2 ii a (Slag activity index -7 days)	-
6 and Table 2 ii b (Slag activity index -28 days)	-
Clause 5.1 (Manganese oxide (MnO))	-
Clause 5.1 (Magnesium oxide (MgO))	-
Clause 5.1 (Sulphide sulphur (S))	-
Clause 5.1 (Sulphate (as SO3),)	-
Clause 5.1 (Insoluble residue)	-
Clause 5.1 (Chloride content)	-
Clause 5.1 (Loss on ignition)	-
Clause 5.1 ((CaO+MgO+1/3AlO3)/( SiO2 +2/3 AlO3))	-
Clause 5.1 ((CaO+MgO+Al2O3)/ SiO2)	-
Clause 5.1 ((CaO+CaS+1/2 MgO+Al2O3)/ (SiO2+ MnO))	-

-
Except glass content

9279

Spectro SSA Labs Private Limited

7190106

IS 13801 (2013)

Chequered Cement Concrete Tiles -

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
(Cl 7, 8 &9)(Length, Breadth, Thickness, Difference in length of side between the longest side and shorterst side in the sample shall not exceed 1 mm, Half tiles, Difference in Thickness between the thickest and thinnest tile in the sample shall not exceed 10 percent of minimum thickness, Depth of chequred groove, Thickness of wearing layer.)	-	1000	-
Cl 12.1(Concavity & Convexity )	-	1500	-
Cl 12.2(Longest gap between the arms of the square and the edge of the title shall not exceed 2 percent of the length.)	-	1000	-
Cl 12.3(Shall not exceed 1 percent of the length of the edge.)	-	1000	-
Cl 12.4(Water absorption)	-	2000	-
Cl 12.6(Resistance to wear)	-	3000	-
Cl 12.5(Wet transverse strength)	-	3000	-
Cl 11(Finish)	-	0	Facility not Available
(Cl 7, 8 &9)(Length, Breadth, Thickness, Difference in length of side between the longest side and shorterst side in the sample shall not exceed 1 mm, Half tiles, Difference in Thickness between the thickest and thinnest tile in the sample shall not exceed 10 percent of minimum thickness, Depth of chequred groove, Thickness of wearing layer.)	-	1000	-
Cl 12.2(Longest gap between the arms of the square and the edge of the title shall not exceed 2 percent of the length.)	-	1000	-
Cl 12.3(Shall not exceed 1 percent of the length of the edge.)	-	1000	-
Cl 12.4(Water absorption)	-	2000	-
Cl 12.5(Wet transverse strength)	-	3000	-
Cl 12.6(Resistance to wear)	-	3000	-
Cl 11(Finish)	-	0	Facility not Available
(Cl 7, 8 &9)(Length, Breadth, Thickness, Difference in length of side between the longest side and shorterst side in the sample shall not exceed 1 mm, Half tiles, Difference in Thickness between the thickest and thinnest tile in the sample shall not exceed 10 percent of minimum thickness, Depth of chequred groove, Thickness of wearing layer.)	-	1000	-
Cl 12.1(Concavity & Convexity )	-	1000	-
Cl 12.2(Longest gap between the arms of the square and the edge of the title shall not exceed 2 percent of the length.)	-	1000	-
Cl 12.3(Shall not exceed 1 percent of the length of the edge.)	-	1000	-
Cl 12.4(Water absorption)	-	2000	-
Cl 12.5(Wet transverse strength)	-	3000	-
Cl 12.6(Resistance to wear)	-	3000	-
Cl 11(Finish)	-	0	Facility not Available
Cl 11(Finish)	-	0	Facility not Available
Cl 12.6(Resistance to wear)	-	3000	-
Cl 12.5(Wet transverse strength)	-	3000	-
Cl 12.4(Water absorption)	-	2000	-
Cl 12.3(Shall not exceed 1 percent of the length of the edge.)	-	1000	-
Cl 12.2(Longest gap between the arms of the square and the edge of the title shall not exceed 2 percent of the length.)	-	1000	-
Cl 12.1(Concavity & Convexity )	-	1000	-
(Cl 7, 8 &9)(Length, Breadth, Thickness, Difference in length of side between the longest side and shorterst side in the sample shall not exceed 1 mm, Half tiles, Difference in Thickness between the thickest and thinnest tile in the sample shall not exceed 10 percent of minimum thickness, Depth of chequred groove, Thickness of wearing layer.)	-	1000	-
8.3(Thickness of wearing layer)	-	1000	-
Annex G3.1(Aluminium oxide content)	-	0	-
Cl 12.1(Concavity & Convexity )	-	1000	-

10 Nov, 2028

-
-

9280

BISS LABS -DIVISION OF ITW INDIA PRIVATE LIMITED. BENGALURU

6175936

IS 2403 (2014)

Short - Pitch transmission precision roller and bush chains, attachments and associated chain sprockets (Third Revision)

479434 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.3 Table-1,2(Dimensions- Pitch- p)	-	500	-
3.3 Table-1,2(Dimensions- Roller diameter- d1)	-	500	-
3.3 Table-1,2(Dimensions- Width between inner plates- b1)	-	500	-
3.3 Table-1,2(Dimensions- Bearing pin body diameter- d2)	-	500	-
3.3 Table-1,2(Dimensions-Bush bore-d3)	-	500	-
3.3 Table-1,2(Dimensions- Chain path depth- h1)	-	500	-
3.3 Table-1,2(Dimensions-Inner plate depth- h2)	-	500	-
3.3 Table-1,2(Dimensions-Outer plate depth- h3)	-	500	-
3.3 Table-1,2(Dimensions- Cranked link dimensions- l1)	-	500	-
3.3 Table-1,2(Dimensions- Cranked link dimensions- l2)	-	500	-
3.3 Table-1,2(Dimensions- Cranked link dimensions- c)	-	500	-
3.3 Table-1,2(Dimensions- Transverse pitch- pt)	-	500	-
3.3 Table-1,2(Dimensions- Width over inner link- b2)	-	500	-
3.3 Table-1,2(Dimensions- Width between outer plates- b3)	-	500	-
3.3 Table-1,2(Dimensions- Width over bearing pins- b4)	-	500	-
3.3 Table-1,2(Dimensions- Width over bearing pins- b5)	-	500	-
3.3 Table-1,2(Dimensions- Width over bearing pins- b6)	-	500	-
3.3 Table-1,2(Dimensions- Additional width for joint fastener- b7)	-	500	-
3.4.2(Tensile Test)	-	51250	1001kN to 2000kN - Rs 135000/sample 501kN to 1000kN - Rs 55000/sample 251kN to 500kN - Rs 25000/sample 101kN-250kN - Rs 20000/sample Up to 100kN - Rs 12500/sample
3.4.3(Preloading)	-	51250	1001kN to 2000kN - Rs 135000/sample 501kN to 1000kN - Rs 55000/sample 251kN to 500kN - Rs 25000/sample 101kN-250kN - Rs 20000/sample Up to 100kN - Rs 12500/sample
3.4.4(Length validation- Measuring load)	-	51250	1001kN to 2000kN - Rs 135000/sample 501kN to 1000kN - Rs 55000/sample 251kN to 500kN - Rs 25000/sample 101kN-250kN - Rs 20000/sample Up to 100kN - Rs 12500/sample
3.4.4(Length validation- Length)	-	51250	-
3.4.5(Dynamic testing)	-	264934	1001kN to 2000kN - Rs 412500/3 samples 501kN to 1000kN - Rs 412500/3 samples 251kN to 500kN - Rs 208750/3 samples 101kN-250kN - Rs 208750/3 samples Up to 100kN - Rs 125000/ 3 samples
3.3 Table-1,2(Dimensions- Pitch- p)	-	500	-
3.3 Table-1,2(Dimensions- Roller diameter- d1)	-	500	-
3.3 Table-1,2(Dimensions- Width between inner plates- b1)	-	500	-
3.3 Table-1,2(Dimensions- Bearing pin body diameter- d2)	-	500	-
3.3 Table-1,2(Dimensions-Bush bore-d3)	-	500	-
3.3 Table-1,2(Dimensions- Chain path depth- h1)	-	500	-
3.3 Table-1,2(Dimensions-Inner plate depth- h2)	-	500	-
3.3 Table-1,2(Dimensions-Outer plate depth- h3)	-	500	-
3.3 Table-1,2(Dimensions- Cranked link dimensions- l1)	-	500	-
3.3 Table-1,2(Dimensions- Cranked link dimensions- l2)	-	500	-
3.3 Table-1,2(Dimensions- Cranked link dimensions- c)	-	500	-
3.3 Table-1,2(Dimensions- Transverse pitch- pt)	-	500	-
3.3 Table-1,2(Dimensions- Width over inner link- b2)	-	500	-
3.3 Table-1,2(Dimensions- Width between outer plates- b3)	-	500	-
3.3 Table-1,2(Dimensions- Width over bearing pins- b4)	-	500	-
3.3 Table-1,2(Dimensions- Width over bearing pins- b5)	-	500	-
3.3 Table-1,2(Dimensions- Width over bearing pins- b6)	-	500	-
3.3 Table-1,2(Dimensions- Additional width for joint fastener- b7)	-	500	-
3.4.2(Tensile Test)	-	51250	-
3.4.3(Preloading)	-	51250	-
3.4.4(Length validation- Measuring load)	-	51250	-
3.4.4(Length validation- Length)	-	51250	-
3.4.5(Dynamic testing)	-	264934	1001kN to 2000kN - Rs 412500/3 samples 501kN to 1000kN - Rs 412500/3 samples 251kN to 500kN - Rs 208750/3 samples 101kN-250kN - Rs 208750/3 samples Up to 100kN - Rs 125000/ 3 samples

-
Included w.e.f. 21.06.2024 Excluding Sprockets

9281

Spectro SSA Labs Private Limited

7190106

IS 1077 (1992)

Common burnt clay building bricks - Specification (Fifth Revision)

Designation 3.5 to 35 N/mm2

4000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Common burnt clay bricks)	-	0	-
5(General Quality)	-	0	-
6.1(Dimensions)	-	1000	-
6.2(Tolerances)	-	0	-
7.1(Compressive strength)	-	2500	-
7.2(Water Absorption)	-	1500	-
9(Marking)	-	0	Facility not Available
7.3(Efflorescence)	-	2000	-

10 Nov, 2028

-
-

9282

DVG Laboratories & Consultants Pvt Ltd

8193306

IS 3812 (Part 1) (2013)

Pulverized fuel ash - Specification: Part 1 For use as pozzolana in cement, cement mortar and concrete

Pulverized Fuel Ash

11000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 6.1, Table 1 - i(Silicon dioxide (SiO2) plus aluminium oxide (Al2O3) plus ironoxide (Fe2O3) - IS 1727)	-	1500	-
Cl. 6.1, Table 1 - ii(Silicon dioxide (SiO2) - IS 1727)	-	800	-
Cl. 6.1, Table 1 - iii(Reactive Silica - Annex B)	-	1000	-
Cl. 6.1, Table 1 - iv(Magnesium oxide (MgO) - IS 1727)	-	800	-
Cl. 6.1, Table 1 - v( Total sulphur as sulphur trioxide (SO3) - IS 1727)	-	800	-
Cl. 6.1, Table 1 - vi( Available alkalis as equivalent sodium oxide (Na2O) - Annex C)	-	900	-
Cl. 6.1, Table 1 - vii( Total Chlorides - IS 4032)	-	800	-
Cl. 6.1, Table 1 - viii( Loss on ignition - IS 1727)	-	800	-
Cl. 6.2(Moisture content of the fly ash when supplied in dry condition - Annex D)	-	800	-
7.1-Table 2(i)(PHYSICAL REQUIREMENTS-Fineness)	-	1500	-
7.1-Table 2(ii)(PHYSICAL REQUIREMENTS-Particles retained on 45 micron IS sieve)	-	800	-
7.1-Table 2(iii)(PHYSICAL REQUIREMENTS-Average compressive strength)	-	2500	-
7.1-Table 2(iv)(PHYSICAL REQUIREMENTS-Compressive strength at 28 days)	-	2500	-
7.1-Table 2(v)(PHYSICAL REQUIREMENTS-Soundness by autoclave test )	-	2000	-
7.2(Uniformity Requirements)	-	0	-
5.1, 7.1, table-2, iii(Lime reacitivity)	-	2500	-
5.1&7.1, table-2 (III)(Lime Reactivity)	-	2500	-
5.1, 7.1, table-2, iii(Lime reacitivity)	-	2500	-

10 Dec, 2028

-
-

9283

DVG Laboratories & Consultants Pvt Ltd

8193306

IS 14268 (2022)

Uncoated stress relieved low relaxation seven-wire (ply) strand for prestressed concrete -Specification (Second Revision)

9.0, 9.3, 9.6, 11.0, 11.3, 12.5, 12.7, 12.9, 13.0, 15.2

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.2(Carbon)	-	800	-
4.1.2(Silicon)	-	800	-
4.1.2(Manganese)	-	800	-
4.1.2(Sulphur)	-	800	-
4.1.2(Phosphorus)	-	800	-
4.1.2(Chromium)	-	800	-
4.1.2(Nickel)	-	800	-
4.1.2(Molybdenum)	-	800	-
4.1.2(Copper)	-	800	-
4.1.2(Aluminum)	-	800	-
4.1.2(Sulphur + Phosphorus)	-	1000	-
4.1.2(Boron)	-	800	-
4.1.2(Titanium)	-	800	-
4.1.2(Niobium)	-	800	-
4.1.2(Vanadium)	-	800	-
4.1.2(Titanium+Niobium+Vanadium)	-	1500	-
4.1.2(Nitrogen)	-	1000	-
4.1.3(Wire Description)	-	0	-
4.1.4(Table 1)(Indentations Description)	-	0	-
4.1.4(Table 1)(Nominal Depth of Oval Type Indentation)	-	500	-
4.1.4(Table 1)(Length of Oval Type Indentation)	-	500	-
4.1.4(Table 1)(Spacing Between Oval Type Indentations)	-	500	-
4.2(Strand Lay Length)	-	1000	-
4.2(Difference In Diameter Of Centre Wire And Surrounding Wire Of Strand)	-	500	-
4.2(Forming of wire)	-	0	-
4.3(Joints)	-	0	-
4.5(Workmanship and Finish)	-	500	-
6(Table 2)(Diameter)	-	500	-
6(Table 2)(Tensile Strength)	-	1000	-
6(Table 2)(Cross Sectional Area)	-	500	-
6(Table 2)(Mass Per Meter)	-	500	-
6(Table 2)(Breaking Load)	-	1000	-
6(Table 2)(0.2 Percent Proof Load)	-	1000	-
6.2.3(Elongation)	-	1000	-
6.2.4(Relaxation Properties(Relaxation Loss-100h))	-	0	I have no facilities in testing parameter.
6.2.4(Relaxation Properties(Relaxation Loss-1000h))	-	0	I have no facilities in testing parameter.
6.3(Straightness of Strand)	-	1000	-
6.4(Behavior During Cutting)	-	1000	-

10 Dec, 2028

-
Cl 6.2.4 Relaxation Properties

9284

GIGA LABS, BENGALURU

6177526

IS/IEC 60947 : Part 4 : Sec 1 (2012)

Low - Voltage switchgear and controlgear: Part 4 contactors and motor - Starters: Sec 1 electromechanical contactors and motor - Starters (First Revision)

160000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.3.3.3.3( Temperature rise of a part )	-	100000	-
9.3.3.2(Operating limits)	-	100000	-
9.3.3.1(Ambient air temperatur)	-	100000	-
9.3.3.4 (Dielectric properties )	-	100000	-
9.3.3.5("verification of rated making and breaking capacities, change-over ability and reversibility, where applicable")	-	30000	-
9.3.3.6(verification of conventional operational performance)	-	30000	-
9.3.5(Overload current withstand capability of contactors)	-	10000	-
Cl.9.1.5.2 (Annex Q of IS/IEC 60947-1)(Special tests)	-	20000	-
9.3.3.3.3( Temperature rise of a part )	-	25000	-
9.3.3.2(Operating limits)	-	30000	-
9.3.3.1(Ambient air temperatur)	-	30000	-
9.3.3.4 (Dielectric properties )	-	10000	-
9.3.3.5("verification of rated making and breaking capacities, change-over ability and reversibility, where applicable")	-	30000	-
9.3.3.6(verification of conventional operational performance)	-	30000	-
9.3.5(Overload current withstand capability of contactors)	-	10000	-
Cl.9.1.5.2 (Annex Q of IS/IEC 60947-1)(Special tests)	-	18000	-
5.2(Type of equipment )	-	2000	-
5.2.1(Kind of equipment)	-	2000	-
5.2.1(Kind of equipment)	-	2000	-
5.2.1(Kind of equipment)	-	2000	-
5.2.1(Kind of equipment)	-	2000	-
5.2.1(Kind of equipment)	-	2000	-
5.2.1(Kind of equipment)	-	2000	-
5.2.2(Number of poles)	-	2000	-
5.2.3(Kind of current)	-	2000	-
5.2.4 (Interrupting medium )	-	2000	-
5.2.5.1( Operating conditions of the equipment - Method of Operation)	-	2000	-
5.2.5.2(Method of control )	-	2000	-
5.2.5.3(Method of change-over for particular types of starters )	-	2000	-
5.2.5.4(Method of connecting for particular types of starters )	-	2000	-
5.3.1.1(Rated voltages : Rated operational voltage (Ue) )	-	2000	-
5.3.1.1.1 (Rated stator operational voltage (Ues) )	-	2000	-
5.3.1.1.2( Rated rotor operational voltage (Uer) )	-	2000	-
5.3.1.2 (Rated insulation voltage (Ui) )	-	2000	-
5.3.1.2.1 (Rated stator insulation voltage (Uis)	-	2000	-
5.3.1.2.2 (Rated rotor insulation voltage (Uir) )	-	2000	-
5.3.1.3 (Rated impulse withstand voltage (Uimp) )	-	2000	-
5.3.1.4 (Rated starting voltage of an auto-transformer starter )	-	2000	-
5.3.2.1 (Conventional free air thermal current (Ith) )	-	2000	-
5.3.2.2 (Conventional enclosed thermal current (Ithe) )	-	2000	-
5.3.2.3( Conventional stator thermal current (Iths))	-	2000	-
5.3.2.4 (Conventional rotor thermal current (Ithr))	-	2000	-
5.3.2.5( Rated operational currents (Ie) or rated operational powers )	-	2000	-
5.3.2.6( Rated stator operational current (Ies) or rated stator operational power )	-	2000	-
5.3.2.7 (Rated rotor operational current (Ier) )	-	2000	-
5.3.2.8 (Rated uninterrupted current (Iu))	-	2000	-
5.3.3 (Rated frequency )	-	2000	-
5.3.4 (Rated duties )	-	2000	-
5.3.4.1 (Eight-hour duty (continuous duty)	-	2000	-
5.3.4.2 (Uninterrupted duty )	-	2000	-
5.3.4.3 (Intermittent periodic duty or intermittent duty )	-	2000	-
5.3.4.4( Temporary duty )	-	2000	-
5.3.4.5( Periodic duty )	-	2000	-
5.3.5 (Normal load and overload characteristics )	-	2000	-
5.3.5.1 (Ability to withstand motor switching overload currents )	-	2000	-
5.3.5.2 (Rated making capacity )	-	2000	-
5.3.5.3 (Rated breaking capacity )	-	2000	-
5.3.5.4 (Conventional operational performance )	-	2000	-
5.3.5.5( Starting and stopping characteristics of starters )	-	2000	-
5.3.5.5( Starting and stopping characteristics of starters )	-	2000	-
5.3.5.5( Starting and stopping characteristics of starters )	-	2000	-
5.3.5.5( Starting and stopping characteristics of starters )	-	2000	-
5.3.5.5( Starting and stopping characteristics of starters )	-	2000	-
5.3.5.5( Starting and stopping characteristics of starters )	-	2000	-
5.3.5.5.1 (Starting characteristics of rheostatic rotor starters )	-	2000	-
5.3.5.5.2( Standard conditions for making and breaking corresponding to the starting characteristics for rheostatic rotor starters)	-	2000	-
5.3.5.5.3( Starting characteristics for two-step auto-transformer starters)	-	2000	-
5.3.6 (Rated conditional short-circuit current)	-	2000	-
5.3.7 (Pole impedance of a contactor (Z) )	-	2000	-
5.4.1(Utilization category : General)	-	2000	-
5.4.2(Assignment of utilization categories based on the results of tests )	-	2000	-
5.4.2(Assignment of utilization categories based on the results of tests )	-	2000	-
5.5( Control circuit)	-	2000	-
5.5( Control circuit)	-	2000	-
5.5( Control circuit)	-	2000	-
5.5( Control circuit)	-	2000	-
5.5( Control circuit)	-	2000	-
5.5( Control circuit)	-	2000	-
5.6( Auxiliary circuits)	-	2000	-
5.7.2( Types of relay or releas)	-	2000	-
5.7.3 (Characteristic values : Release with shunt coil, under-voltage (under-current), over-voltage (instantaneous over current), current or voltage imbalance and phase reversal opening relay or release)	-	2000	-
5.7.3 (Characteristic values : Release with shunt coil, under-voltage (under-current), over-voltage (instantaneous over current), current or voltage imbalance and phase reversal opening relay or release)	-	1000	-
5.7.3 (Characteristic values : Release with shunt coil, under-voltage (under-current), over-voltage (instantaneous over current), current or voltage imbalance and phase reversal opening relay or release)	-	1000	-
5.7.3 (Characteristic values : Release with shunt coil, under-voltage (under-current), over-voltage (instantaneous over current), current or voltage imbalance and phase reversal opening relay or release)	-	1000	-
5.7.3 (Characteristic values : Release with shunt coil, under-voltage (under-current), over-voltage (instantaneous over current), current or voltage imbalance and phase reversal opening relay or release)	-	1000	-
5.7.3 (Characteristic values : Overload relay)	-	1000	-
5.7.3 (Characteristic values : Overload relay)	-	1000	-
5.7.3 (Characteristic values : Overload relay)	-	1000	-
5.7.3 (Characteristic values : Overload relay)	-	1000	-
5.7.3 (Characteristic values : Overload relay)	-	1000	-
5.7.3 (Characteristic values : Overload relay)	-	1000	-
5.7.3 (Characteristic values : Overload relay)	-	1000	-
5.7.3 (Characteristic values : Release with residual current sensing relay:)	-	1000	-
5.7.3 (Characteristic values : Release with residual current sensing relay:)	-	1000	-
5.7.3 (Characteristic values : Release with residual current sensing relay:)	-	1000	-
5.7.3 (Characteristic values : Release with residual current sensing relay:)	-	1000	-
5.7.3 (Characteristic values : Release with residual current sensing relay:)	-	1000	-
5.7.4( Designation and current settings of overload relays)	-	1000	-
5.7.5( Time-current characteristics of overload relays )	-	1000	-
5.7.6 (Influence of ambient air temperature )	-	1000	-
5.8(Co-ordination with short-circuit protective devices )	-	1000	-
5.10.1( Types : Time-delay devices)	-	1000	-
5.10.1( Types : Time-delay devices)	-	1000	-
5.10.1( Types : Time-delay devices)	-	1000	-
5.10.2 (Characteristics )	-	1000	-
5.10.2 (Characteristics )	-	1000	-
5.10.2 (Characteristics )	-	1000	-
5.11(Types and characteristics of auto-transformers for two-step auto-transformer starters )	-	1000	-
5.11(Types and characteristics of auto-transformers for two-step auto-transformer starters )	-	1000	-
5.11(Types and characteristics of auto-transformers for two-step auto-transformer starters )	-	1000	-
5.11(Types and characteristics of auto-transformers for two-step auto-transformer starters )	-	1000	-
5.11(Types and characteristics of auto-transformers for two-step auto-transformer starters )	-	1000	-
5.11(Types and characteristics of auto-transformers for two-step auto-transformer starters )	-	1000	-
5.12( Types and characteristics of starting resistors for rheostatic rotor starters )	-	1000	-
5.12( Types and characteristics of starting resistors for rheostatic rotor starters )	-	1000	-
5.12( Types and characteristics of starting resistors for rheostatic rotor starters )	-	1000	-
5.12( Types and characteristics of starting resistors for rheostatic rotor starters )	-	1000	-
6.1.1( Identification)	-	1000	-
6.1.1( Identification)	-	1000	-
6.1.1( Identification)	-	1000	-
6.1.2(Characteristics: )	-	1000	-
6.1.2(Safety and installation: )	-	1000	-
6.1.2(Control circuits)	-	1000	-
6.1.2(Overload relays and releases)	-	1000	-
6.1.2(Overload relays and releases)	-	1000	-
6.1.2(Rheostatic rotor starters)	-	1000	-
6.1.2(Rheostatic rotor starters)	-	1000	-
6.1.2(Rheostatic rotor starters)	-	1000	-
6.1.2(Auto-transformer starters: )	-	1000	-
6.1.2(Vacuum contactors and starters: )	-	1000	-
6.1.2(Vacuum contactors and starters: )	-	1000	-
6.1.2(Vacuum contactors and starters: )	-	1000	-
6.2(Marking )	-	1000	-
7(Normal service, mounting and transport conditions )	-	1000	-
8.1.1(Constructional requirements : Genaral)	-	1000	-
8.1.2.1( General materials requirements )	-	1000	-
8.1.2.2 (Glow wire testing )	-	1000	-
8.1.2.3 (Test based on flammability category )	-	1000	-
8.1.3( Current-carrying parts and their connections )	-	1000	-
8.1.4(Clearance)	-	1000	-
8.1.4( creepage distances )	-	1000	-
8.1.5(Actuator )	-	1000	-
8.1.5.1( Insulation)	-	1000	-
8.1.5.2 (Direction of movement)	-	1000	-
8.1.5.3( Mounting )	-	1000	-
8.1.6.1 (Indicating means )	-	1000	-
8.1.6.2( Indication by the actuator)	-	1000	-
8.1.7( Additional requirements for equipment suitable for isolation )	-	1000	-
8.1.8( Terminals)	-	1000	-
8.2.2.3 (Accessible part)	-	1000	-
8.2.2.4( Ambient air temperatur)	-	1000	-
9.3.3.3.2 (Measurement of the temperature of parts )	-	25000	-
9.3.3.3.4 (Temperature rise of the main circuit )	-	25000	-
9.3.3.3.5( Temperature rise of control circuit)	-	25000	-
9.3.3.3.6( Temperature rise of coils and electromagnets )	-	25000	-
9.3.3.3.7 (Temperature rise of auxiliary circuits )	-	25000	-
9.3.3.4.1( Type tests )	-	10000	-
9.2.1(General)	-	2000	-
9.2.2(Electrical performance of screwless-type clamping unit)	-	2000	-
9.1.2, (i) (8.2.4 of IEC 60947-1:2007)(Mechanical properties of terminals)	-	1000	-
9.1.2 (j) (Annex C of IEC 60947-1)(verification of degrees of protection of enclosed contactors and starters)	-	1000	-
9.3.3.2.1(Power-operated equipment)	-	30000	-
9.3.3.2.1.2(Coil power consumption)	-	30000	-
9.3.3.2.2(Relays and releases)	-	30000	-
9.3.6.2(Operation and operating limits)	-	30000	-
9.3.6.2(Operation and operating limits)	-	30000	-
8.1.10(Provisions for protective earthing)	-	10000	-
8.1.11(Enclosures for equipment)	-	10000	-
8.1.12(Degrees of protection of enclosed equipment)	-	10000	-
8.1.13(Conduit pull-out, torque and bending with metallic conduits)	-	10000	-
9.2.3(Ageing test for screwless-type clamping units)	-	10000	-
8.2.2(Temperature Rise)	-	30000	-
8.2.4.3(Durability)	-	40000	-
H.3(Limits of operation of control functions)	-	40000	-
H.4(Test of the control functions)	-	40000	-
9.4.1(General)	-	18000	-
9.4.2(Immunity)	-	18000	-
9.4.3(Emission)	-	18000	-
9.3.6.3(Dielectric tests)	-	10000	-
B.2(Mechanical durability)	-	40000	-
B.3(Electrical durability)	-	40000	-
F.7.2(Tests on products in a new condition)	-	30000	-
F.7.3(Test after conventional operational performance)	-	30000	-
8.1.9(Additional requirements for equipment provided with a neutral pole)	-	10000	-

-
Included w.e.f. 05.08.2024 Exclusion: Cl. 9.3.4 (Performance under short-circuit conditions), Cl. 9.3.3.3.8 (Temperature rise of starting resistors for rheostatic rotor starters ), Cl. 9.3.3.3.9 ( Temperature rise of the auto-transformer for two-step auto-transformer starters), Cl. 9.3.4.2.3 (Verification of dielectric Withstand), 8.2.5.2 (Co-ordination at the crossover current between starter and associated SCPD)

9285

BIS, Southern Regional Laboratory (SRL)

None

IS 1536 (2023)

Centrifugally cast (spun) iron pressure pipes for water, gas and sewage ï¿½ Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
"Cl- 11.1,11.2, 11.4 Annex A" (Ring Test (for pipes cast in metal moulds))	-
Cl- 11.3,6.2,11.4 (Brinell Hardness Test)	-
"Cl- 13 to 14, Table 3 to 11" (Sizes, Dimensions & Tolerances)	-
Cl- 15.1 & 15.2 (Coating)	-

-
-

9286

National Test House (NR) - NTH, Ghaziabad

8101304

IS 6419 (1996)

Welding rods and bare electrodes for gas shielded arc welding of structural steel - Specification (First Revision)

20000 View breakup
Rs.20000/- [ Rs.15000/-for Physical, Rs.5000/- for Chemical]

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.1(Copper Content of Coated Wire or Rod)	-	500	-
14.1 Table 7(Carbon-Relevant parts of IS 228)	-	500	-
14.1 Table 7(Manganese-Relevant parts of IS 228)	-	500	-
14.1 Table 7(Silicon-Relevant parts of IS 228)	-	500	-
14.1 Table 7(Phosphorous-Relevant parts of IS 228)	-	500	-
14.1 Table 7(Sulphur-Relevant parts of IS 228)	-	500	-
14.1 Table 7(Nickel-Relevant parts of IS 228)	-	500	-
14.1 Table 7(Chromium-Relevant parts of IS 228)	-	500	-
14.1 Table 7(Copper-Relevant parts of IS 228)	-	500	-
14.1 Table 7(Molybdenum-Relevant parts of IS 228)	-	500	-
14.1 Table 7(Vanadium-Relevant parts of IS 228)	-	500	-
14.1 Table 7(Titanium-Relevant parts of IS 228)	-	500	-
14.1 Table 7(Aluminium-Relevant parts of IS 228)	-	500	-
14.1 Table 7(Mo+Ni+Cr-Relevant parts of IS 228)	-	500	-
5(Diameter)	-	500	-
6(Reels for Wire)	-	500	-
7(Reeling Condition)	-	500	-
8(Dimension of Spools, Rims & Coils)	-	1500	-
10.1(Finish)	-	500	-
10.2.2 Table 6(Cast- As per Cl.10.2.2 )	-	500	-
10.2.3 Table 6(Helix- As per Cl.10.2.3 )	-	500	-
10.2.1(Welding rods and bare electrodes for gas shielded arc welding of structural steel)	-	1000	-
14.2(Soundness test)	-	1000	-
14.3.2(Yield Stress)	-	1000	-
14.3.2(UTS)	-	1000	-
14.3.2(% of Elongation)	-	1000	-
14.3.3(Impact Test)	-	3000	-
10.2.1 Table 5(Tensile Strength-IS 1608(P-1))	-	1000	-

-
S1, S2, S3, S4, S5, S6

9287

BIS, Eastern Regional Laboratory (ERL)

None

IS 18573 (2024)

Cold formed welded carbon steel square and rectangular hollow sections for mechanical, general engineering and decorative purposes ï¿½ Specification

For all grades

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause.4.0 (Sulphur)	-
Clause.4.0 (Phosphorus)	-
Clause.6.0 (Workmanship)	-
Clause.10.0 (Dimensions and properties)	-
Clause.11.0 (Outside Dimension)	-
Clause.11.0 (Thickness)	-
Clause.11.0 (Concavity and Convexity)	-
Clause.11.0 (Squareness of Sides)	-
Clause.11.0 (Straightness and twist)	-
Clause.12.0 (Dimension Tolerances)	-
Clause.13.0 (Surface Protection)	-
Clause.15.0 (Tensile test)	-

-
Mech: Complete Chem: Complete

9288

MATERIAL TESTING LABORATORY LLP

8176306

IS 18573 (2024)

Cold formed welded carbon steel square and rectangular hollow sections for mechanical, general engineering and decorative purposes ï¿½ Specification

All Grade

16000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause. 3.0(Types)	-	0	-
Clause.4.0(Carbon)	-	500	-
Clause.4.0(Sulphur)	-	500	-
Clause.4.0(Phosphorus)	-	500	-
Clause.4.0(Silicon)	-	500	-
Clause.4.0(Manganese)	-	500	-
Clause.5.0(Supply of Material)	-	0	-
Clause.6.0(Workmanship)	-	500	-
Clause.7.0(Straightness)	-	1000	-
Clause.8.0(Basis of Calculation)	-	1000	-
Clause.9.0(Length)	-	1000	-
Clause.10.0(Dimensions and properties)	-	1000	-
Clause.11.0(General)	-	0	-
Clause.11.0(Outside Dimension)	-	1000	-
Clause.11.0(Thickness)	-	500	-
Clause.11.0(Concavity and Convexity)	-	1000	-
Clause.11.0(Squareness of Sides)	-	1000	-
Clause.11.0(External Corner Radiius)	-	1000	-
Clause.11.0(Straightness and twist)	-	1000	-
Clause.12.0(Dimension Tolerances)	-	1000	-
Clause.13.0(Surface Protection)	-	1000	-
Clause.14.0(Testing)	-	0	-
Clause.15.0(Tensile test)	-	500	-
Clause.15.0(Yield strength)	-	500	-
Clause.15.0(Elognation Percent)	-	500	-
Clause.18.0(Marking)	-	500	-
Clause.4.0(Sulphur)	-	500	-
Clause.5.0(Supply of Material)	-	0	-
Clause.10.0(Dimensions and properties)	-	1000	-
Clause.11.0(Thickness)	-	500	-
Clause.12.0(Dimension Tolerances)	-	1000	-

-
Included w.e.f. 28.08.2024

9289

Spectro SSA Labs Private Limited

7190106

IS 2185 : Part 3 (1984)

Concrete Masonry Units Part 3 Autoclaved Cellular Aerated Concrete Blocks

Grade 1 and Grade 2

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.2(Physical requirments-Dimensions-Length)	-	1000	-
8.2(Physical requirments-Dimensions-Height)	-	1000	-
8.2(Physical requirments-Dimensions-Width)	-	1000	-
8.3(Physical requirments- Block density)	-	2000	-
8.4(Physical requirments- Compressive strength)	-	3500	-
8.6( Drying Shrinkage )	-	2500	-
8.4, 9.2 & 11.3(Indivisual Moisture Content)	-	2000	-
8.4, 9.2 & 11.3(Indivisual Bulk density)	-	3500	-
8.4, 9.2 & 11.3 & Table 1(Indivisual Compressive strength)	-	3500	-
8.3 & 9.1(Indivisual Moisture Content)	-	2000	-
8.3 & 9.1 Table 1(Indivisual Block Density)	-	2000	-
3.2 & 8.2(Indivisual Height)	-	1000	-
3.2 & 8.2(Indivisual Width)	-	1000	-
8.6, 9.4 & 11.5(Grade)	-	0	Facility not Available
3.4(Special Faces)	-	0	Facility not Available
3.3(Faces & Arises)	-	0	Facility not Available
3.1(Shape)	-	0	Facility not Available
8.1.1(General (Exposed wall construction))	-	0	Facility not Available
5(MATERIALS)	-	0	Facility not Available
7(SURFACE TEXTURE AND FINISH)	-	0	Facility not Available
15(Marking)	-	0	Facility not Available
8(Physical requirments)	-	0	-
3.2 & 8.2(Indivisual Length)	-	1000	-
8.5(Thermal Conductivity)	-	0	-
9.3(Thermal Conductivity)	-	0	-

10 Nov, 2028

-
-

9290

NDL POWER LIMITED, ROHTAK

9182206

IS 16659 (2017)

Fluids for electrotechnical applications - Unused natural esters for transformers and similar electrical equipment

11000.0 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1-Table 1-i)(Appearance)	-	250.0	ok
4.1-Table 1-ii)(Viscosity at 100 °C)	-	500.0	ok
4.1-Table 1-iii)(Viscosity at 40 °C)	-	500.0	ok
4.1-Table 1-iv)(Pour point)	-	500.0	ok
4.1-Table 1-v)(Water content)	-	500.0	ok
4.1-Table 1-vi)(Density at 20 °C)	-	500.0	ok
4.1-Table 1-vii)(Breakdown voltage)	-	500.0	ok
4.1-Table 1-viii)(Dissipation factor (tan δ) 90 °C)	-	850.0	ok
4.1-Table 1-ix)(Soluble acidity)	-	500.0	ok
4.1-Table 1-x)(Corrosive sulfur DBDS)	-	3500.0	ok
4.1-Table 1-xi)(Total additives)	-	0.0	We are not having Proper Testing Facility
4.1-Table 1-xii)(Performance – Salient properties after oxidation stability test)	-	0.0	ok
4.1-Table 1-xiii)(Total acidity)	-	500.0	ok
4.1-Table 1-xiv)(Viscosity at 40 °C)	-	500.0	ok
4.1-Table 1-xv)(DDF (tan δ) at 90 °C)	-	850.0	ok
4.3.3(Relative permittivity (dielectric constant))	-	850.0	ok
4.1-Table 1-xvi)(Fire point Flash point)	-	500.0	ok

10 Nov, 2027

-
Biodegradation (Cl 4.1 Table 1-xvii), Total Additives (Cl 4.1 Table 1-xi)

9291

BIS, Central Laboratory (CL)

None

IS 302 : Part 2 : Sec 76 (1999)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 76 electric fence energizers

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.6.1 OF IS:302-1:2008 (Classification)	-
Cl.6.2 OF IS:302-1:2008 (Classification)	-
CL. 1.1 (VOLTAGE)	-
Cl.7 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7 (Marking and Instructions)	-
Cl.7 (Marking and Instructions)	-
Cl.7 (Marking and Instructions)	-
Cl.7.2 (Marking and Instructions)	-
Cl.7.3 (Marking and Instructions)	-
Cl.7.3 (Marking and Instructions)	-
Cl.7.3 (Marking and Instructions)	-
Cl.7.4 (Marking and Instructions)	-
Cl.7.5 (Marking and Instructions)	-
Cl.7.6 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7.8 of IS :302-1:2008 (Marking and Instructions)	-
Cl.7.9 of IS :302-1:2008 (Marking and Instructions)	-
Cl.7.10 of IS :302-1:2008 (Marking and Instructions)	-
Cl.7.11 of IS :302-1:2008 (Marking and Instructions)	-
Cl.7.12 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7.12 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7.12.1 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7.12.2 OF IS:302-1:2008 (Marking and Instructions)	-
Cl.7.12.3 & IS:302-1:2008 (Marking and Instructions)	-
Cl.7.12.4 OF IS:302-1:2008 (Marking and Instructions)	-
Cl.7.12.5 OF IS:302-1:2008 (Marking and Instructions)	-
Cl.7.12.6 OF IS:302-1:2008 (Marking and Instructions)	-
Cl.7.12.7 OF IS:302-1:2008 (Marking and Instructions)	-
Cl.7.12.8 OF IS:302-1:2008 (Marking and Instructions)	-
Cl.7.13 of IS 302-1:2008 (Marking and Instructions)	-
Cl.7.14 of IS302-1:2008 (Marking and Instructions)	-
Cl.7.15 of IS 302-1:2008 (Marking and Instructions)	-
Cl.7.16 of IS 302-1:2008 (Marking and Instructions)	-
Cl.7.101 (Marking and Instructions)	-
Cl.7.102 (Marking and Instructions)	-
Cl.8.1 OF IS:302-1:2008 (Protection Against Access to Live Parts)	-
Cl.8.1.1 OF IS:302-1:2008 (Protection Against Access to Live Parts)	-
Cl.8.1.2 OF IS:302-1:2008 (Protection Against Access to Live Parts)	-
Cl.8.1.3 OF IS:302-1:2008 (Protection Against Access to Live Parts)	-
Cl.8.1.4 OF IS:302-1:2008 (Protection Against Access to Live Parts)	-
Cl.8.1.5 OF IS:302-1:2008 (Protection Against Access to Live Parts)	-
Cl.8.2 OF IS:302-1:2008 (Protection Against Access to Live Parts)	-
Cl.10.1 OF IS:302-1:2008 (Power Input and Current)	-
Cl.11.2 OF IS:302-1:2008 (Heating)	-
Cl.11.3 OF IS:302-1:2008 (Heating)	-
Cl.11.4 OF IS:302-1:2008 (Heating)	-
Cl.11.5 OF IS:302-1:2008 (Heating)	-
Cl.11.5 OF IS:302-1:2008 (Heating)	-
Cl.11.6 OF IS:302-1:2008 (Heating)	-
Cl.11.7 OF IS:302-1:2008 (Heating)	-
Cl.11.8 OF IS:302-1:2008 (Heating)	-
Cl.13.1 OF IS:302-1:2008 (Leakage Current & Electric Strength at operating temp.)	-
Cl.13.2 OF IS:302-1:2008 (Leakage Current & Electric Strength at operating temp.)	-
Cl.13.3 OF IS:302-1:2008 (Leakage Current & Electric Strength at operating temp.)	-
Cl.14.101 OF IS:302-1:2008 (TRANSIENT OVERVOLTAGE)	-
Cl.15 OF IS: 302-1:2008 (Moisture Resistance)	-
Cl.15.3 of IS 302-1:200 (Moisture Resistance)	-
Cl.16.1 OF IS:302-1:2008 (Leakage Current & Electric Strength)	-
Cl.16.2 OF IS:302-1:2008 (Leakage Current & Electric Strength)	-
Cl.16.3 OF IS:302-1:2008 (Leakage Current & Electric Strength)	-
Cl.16.101 OF IS:302-1:2008 (Leakage Current & Electric Strength)	-
Cl.16.102 OF IS:302-1:2008 (Leakage Current & Electric Strength)	-
Cl.18 (Endurance.)	-
Cl.19.1 OF IS:302-1:2008 (Abnormal Operation.)	-
Cl.19.11 OF IS:302-1:2008 (Abnormal Operation.)	-
Cl.19 OF IS:302-1:2008 (Abnormal Operation.)	-
Cl.19 OF IS:302-1:2008 (Abnormal Operation.)	-
Cl.19.101 (Abnormal Operation.)	-
Cl.19.102 (Abnormal Operation.)	-
Cl.19.103 (Abnormal Operation.)	-
Cl.19.105 (Abnormal Operation.)	-
Cl.19.106 (Abnormal Operation.)	-
Cl.21 & IS:302-1:2008) (Mechanical Strength.)	-
Cl.21.2 of IS 302-1:2008 (Mechanical Strength.)	-
Cl. 22.101 (Construction)	-
Cl. 22.102 (Construction)	-
Cl. 22.103 (Construction)	-
Cl. 22.104 (Construction)	-
Cl. 22.105 (Construction)	-
Cl. 22.106 (Construction)	-
Cl. 22.107 (Construction)	-
Cl. 22.108 (Construction)	-
Cl. 22.109 (Construction)	-
Cl.23.1 of IS:302-1:2008 (Internal Wiring)	-
Cl.24.1 of IS 302-1:2008 (Components)	-
Cl.25.1 -ADDITION (Supply Connection And External Flexible Cords)	-
Cl.25.4 of IS 302-1:2008 (Supply Connection And External Flexible Cords)	-
Cl.25.6 of IS 302-1:2008 (Supply Connection And External Flexible Cords)	-
Cl.26.101 (Terminals for external conductors)	-
Cl.26.102 (Terminals for external conductors)	-
Cl.26.103 (Terminals for external conductors)	-
Cl.27.1 of IS 302-1:2008 (Provision For Earthing)	-
Cl.28.1 of IS 302-1:2008 (Screws and connections)	-
CL.29 of IS 302-1:2008 ("Clearances, Creepage distances and solid insulation")	-
CL.30.1 of IS 302-1:2008 (Resistance to heat and fire)	-
CL.30.2 of IS 302-1:2008 (Resistance to heat and fire)	-
CL.31 of IS 302-1:2008 (Resistance to Rusting)	-
CL.32 of IS 302-1:2008 (Radiation, toxicity and similar hazards)	-

-
-

9292

BIS, Central Laboratory (CL)

None

IS 9997 (1991)

Aluminium alloy redraw rods for electrical purposes - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 6.1 (Silicon)	-
Cl.8 ("Electrical Resistivity Resistivity ")	-
Cl.9 (Dimension and permissible variation)	-
Cl.11 (Freedom from defects)	-

-
-

9293

Spectro SSA Labs Private Limited

7190106

IS 2185 : Part 1 (2005)

Concrete masonry units - Specification: Part 1 hollow and solid concrete blocks (Third Revision)

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.1(PHYSICAL REQUIREMENTS-General)	-	0	-
9.2 & 4.2(PHYSICAL REQUIREMENTS-Nominal Dimensions 1.Length 2.Hight 3. Width)	-	1000	-
9.2 & 4.2.3(Nominal Dimensions-variation in the length of units )	-	1000	-
9.2 & 4.2.3(Nominal Dimensions -variation in height and width of units )	-	1000	-
9.2 & 4.2.4, Table-1(Nominal Dimensions-thickness of the face shell)	-	1000	-
9.2 & 4.2.4, Table-1(Nominal Dimensions-thickness of the Web shell)	-	1000	-
9.3 & 5.1 & 5.2 Table 2(PHYSICAL REQUIREMENTS-Blocks Density - 1.Hollow (Open and Closed Cavity) Concrete Block- Grade Aor Grade B 2.Solid Concrete Block — Grade C)	-	2000	-
9.4- Table 2(PHYSICAL REQUIREMENTS - Compressive Strength 1.Minimum Average Compressive Strength of Units 2.Minimum Average Compressive Strength of Individual Unit)	-	4000	-
9.5(PHYSICAL REQUIREMENTS -Water Absorption)	-	2000	-
9.6(PHYSICAL REQUIREMENTS -Drying Shrinkage)	-	2500	-
9.7(PHYSICAL REQUIREMENTS -Moisture Movement)	-	2000	-

10 Nov, 2028

-
-

9294

Cotecna Inspection India Private Limited, Gurugram

8166106

IS 9730 (2008)

Non - Stick unreinforced plastics coatings on domestic cooking utensils - Specification (First Revision)

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Material)	-	500	-
4.2(Visual Defects)	-	500	-
4.3 & 7.2(Thickness)	-	1000	-
4.4 & 7.3(Non-stick Quality)	-	2000	-
4.5 & 7.4(Salt Water Corrosion Resistance)	-	2000	-
4.6, 7.5.2 & 7.5.3(Adhesion Test)	-	2500	-
5(Marking)	-	500	-
6(Instructions for use)	-	500	-
4.1(Material)	-	0	-
4.2(Visual Defects)	-	0	-
4.3 & 7.2(Thickness)	-	0	-
4.4 & 7.3(Non-stick Quality)	-	0	-
4.5 & 7.4(Salt Water Corrosion Resistance)	-	0	-
4.6, 7.5.2 & 7.5.3(Adhesion Test)	-	0	-
5(Marking)	-	0	-
6(Instructions for use)	-	0	-

-
-

9295

RAMCO RESEARCH AND DEVOLPMENT CENTRE, CHENNAI

6183606

IS 1290 (1973)

Specification for mineral gypsum (Second Revision)

11100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2 , Table No. 1 , i)(Free water)	-	1000	-
3.2 , Table No. 1 , iii)(Silica and other insoluble matter)	-	2800	-
3.2 , Table No. 1 , iv)(Iron and aluminium (as oxides))	-	2000	-
3.2 , Table No. 1 , v)(Magnesium oxide (as MgO))	-	1000	-
3.2 , Table No. 1 , vi)(Calcium sulphate (as CaSO4.2H2O))	-	1800	-
3.2 , Table No. 1 , vii)(Chlorides (as NaCl))	-	1500	-
3.3.1(Acidity and Alkalinity)	-	1000	-

12 Jan, 2028

-
-

9296

NDL POWER LIMITED, ROHTAK

9182206

IS 16081 (2013)

Insulating liquids - Specifications for unused synthetic organic esters for electrical purposes

12500.0 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Flash point and fire point)	-	500.0	ok
7.1.2(Appearance)	-	250.0	ok
7.1.3(Density)	-	500.0	ok
7.1.4(Kinematic viscosity)	-	500.0	ok
7.1.5(Flash point and fire point)	-	500.0	ok
7.1.6(Pour point)	-	500.0	ok
7.1.8(Water content)	-	500.0	ok
7.1.9(Acidity)	-	500.0	ok
7.1.10(Oxidation stability)	-	7500.0	ok
8.1(Breakdown voltage)	-	500.0	ok
8.2(Dielectric dissipation factor, permittivity and d.c. resistivity)	-	850.0	ok
9(Specifications for synthetic organic esters used in transformers)	-	0.0	ok
9(Specifications for synthetic organic esters used in transformers)	-	0.0	ok
5.3(Toxicity)	-	0.0	ok
6.1(Classification)	-	0.0	ok
6.2(Identification and general delivery requirements, sampling, packaging and disposal)	-	0.0	ok
6.3(Storage)	-	0.0	ok
6.4(Representative sampling)	-	0.0	ok
6.5(Disposal and spillages)	-	0.0	ok
4(General remarks)	-	0.0	ok
4(General remarks)	-	0.0	ok
7.1.10(Oxidation stability)	-	7500.0	ok
7.1.2(Appearance)	-	250.0	ok
7.1.3(Density)	-	500.0	ok
7.1.4(Kinematic viscosity)	-	500.0	ok
7.1.5(Flash point and fire point)	-	500.0	ok
7.1.6(Pour point)	-	500.0	ok
7.1.8(Water content)	-	500.0	ok
7.1.9(Acidity)	-	500.0	ok
5.1(Flash point and fire point)	-	500.0	ok
5.3(Toxicity)	-	0.0	ok
6.1(Classification)	-	0.0	ok
6.2(Identification and general delivery requirements, sampling, packaging and disposal)	-	0.0	ok
6.3(Storage)	-	0.0	ok
6.4(Representative sampling)	-	0.0	ok
6.5(Disposal and spillages)	-	0.0	ok
8.1(Breakdown voltage)	-	500.0	ok
8.2(Dielectric dissipation factor, permittivity and d.c. resistivity)	-	850.0	ok

10 Nov, 2027

-
Biodegradation (Cl 5.2), Gassing Tendency (Cl 8.3), Crystallization (Cl 7.1.7), Colour (Cl 7.1.1), Viscosity at - 20 degree Calcious (Cl. 9)

9297

RAMCO RESEARCH AND DEVOLPMENT CENTRE, CHENNAI

6183606

IS 3812 (Part 1) (2013)

Pulverized fuel ash - Specification: Part 1 For use as pozzolana in cement, cement mortar and concrete

30800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 6.1, Table 1 - i(Silicon dioxide (SiO2) plus aluminium oxide (Al2O3) plus ironoxide (Fe2O3) - IS 1727)	-	2000	-
Cl. 6.1, Table 1 - ii(Silicon dioxide (SiO2) - IS 1727)	-	1000	-
Cl. 6.1, Table 1 - iii(Reactive Silica - Annex B)	-	3000	-
Cl. 6.1, Table 1 - iv(Magnesium oxide (MgO) - IS 1727)	-	1000	-
Cl. 6.1, Table 1 - vi( Available alkalis as equivalent sodium oxide (Na2O) - Annex C)	-	1000	-
Cl. 6.1, Table 1 - vii( Total Chlorides - IS 4032)	-	1500	-
Cl. 6.1, Table 1 - viii( Loss on ignition - IS 1727)	-	1000	-
Cl. 6.2(Moisture content of the fly ash when supplied in dry condition - Annex D)	-	1000	-
7.1-Table 2(i)(PHYSICAL REQUIREMENTS-Fineness)	-	2000	-
7.1-Table 2(iii)(PHYSICAL REQUIREMENTS-Average compressive strength)	-	3000	-
7.1-Table 2(iv)(PHYSICAL REQUIREMENTS-Compressive strength at 28 days)	-	3000	-
7.1-Table 2(v)(PHYSICAL REQUIREMENTS-Soundness by autoclave test )	-	2000	-
7.2(Uniformity Requirements)	-	1000	-
5.1, 7.1, table-2, iii(Lime reacitivity)	-	3000	-
5.1, 7.1, table-2, iii(Lime reacitivity)	-	3000	-
Cl. 6.1, Table 1 - v( Total sulphur as sulphur trioxide (SO3) - IS 1727)	-	1800	-
5.1&7.1, table-2 (III)(Lime Reactivity)	-	3000	-
7.1-Table 2(ii)(PHYSICAL REQUIREMENTS-Particles retained on 45 micron IS sieve)	-	2000	-

12 Jan, 2028

-
-

9298

BIS, Eastern Regional Laboratory (ERL)

None

IS 15500 : PART 7 (2021)

Deepwell Handpumps, Components and Secial Tools — Specification Part 7 Handpumps

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2.1 ("The constructional details of different components covered in this part shall be as given in Fig. 7.1 to 7.18.")	-
2.2 (" The material and dimensions shall meet the related prerequisites given in 4 and 5 of Part 1.")	-
3 (TESTING)	-

-
-

9299

BIS, Eastern Regional Laboratory (ERL)

None

IS 15500 : PART 4 (2021)

Deepwell Handpumps, Components and Secial Tools — Specification Part 4 Handpumps

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2.1 ("The constructional details of different components covered in this part shall be as given in Fig. 4.1 to 4.35.")	-
2.2 ("2.2 The material and dimensions of the individual component shall meet the requirements given in the related part of this standard.")	-
2.3 ("The steel components shall be given anti-corrosive treatment as mentioned in 6 of Part 1. in Fig. 4.21B")	-
2.4 ("Stainless Steel top connecting rod shall be as given in Fig. 4.21B")	-
3.4 ("The flanges shall be reasonably flat to provide proper matching of the holes to ensure unrestricted insertion of the bolts when assembled with counterpart.")	-
3.5 ("The connecting rods/plunger rods shall be examined for straightness and formation of threads.")	-

-
Excluding Critical dimesnions

9300

NAWaL Analytical Labs India Private Limited, Hosur

6126416

IS 11536 (2022)

Processed Cereal Based Complementary Foods ? Specification ( Third Revision )

41000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4.7.2 and 4.10,Table 1 ,Sl No i)(Moisture)	-	500	+ 18 % GST Extra
Clause 4.7.2 and 4.10,Table 1 ,Sl No ii)(Total Protein)	-	500	+ 18 % GST Extra
Clause 4.7.2 and 4.10,Table 1 ,Sl No iii)(Total Fat)	-	500	+ 18 % GST Extra
Clause 4.7.2 and 4.10,Table 1 ,Sl No iV)(Total Carbohydrates)	-	500	+ 18 % GST Extra
Clause 4.7.2 and 4.10,Table 1 ,Sl No v)(Total Ash)	-	500	+ 18 % GST Extra
Clause 4.7.2 and 4.10,Table 1 ,Sl No vi)(Acid insoluble ash in dilute hydrochloric acid)	-	500	+ 18 % GST Extra
Clause 4.7.2 and 4.10,Table 1 ,Sl No vii)(Iron)	-	500	+ 18 % GST Extra
Clause 4.7.2 and 4.10,Table 1 ,Sl No viii)(Vitamin A (as Retinol equivalent RE))	-	1500	+ 18 % GST Extra
Clause 4.7.2 and 4.10,Table 1 ,Sl No ix)(Vitamin C)	-	1000	+ 18 % GST Extra
Clause 4.7.2 and 4.10,Table 1 ,Sl No x)(Vitamon D)	-	1000	+ 18 % GST Extra
Clause 4.7.2 and 4.10,Table 1 ,Sl No xi)(Crude fibre (on dry basis))	-	500	+ 18 % GST Extra
Clause 4.7.2 and 4.10,Table 1 ,Sl No xii)(Thiamine)	-	1000	+ 18 % GST Extra
Clause 4.7.2 and 4.10,Table 1 ,Sl No xiii)(Riboflavin)	-	1000	+ 18 % GST Extra
Clause 4.7.2 and 4.10,Table 1 ,Sl No xiv)(Niacin equivalent)	-	1000	+ 18 % GST Extra
Clause 4.7.2 and 4.10,Table 1 ,Sl No xv)(Pantothenic acid)	-	1000	+ 18 % GST Extra
Clause 4.7.2 and 4.10,Table 1 ,Sl No xvi)(Pyridoxine)	-	1000	+ 18 % GST Extra
Clause 4.7.2 and 4.10,Table 1 ,Sl No xvii)(Biotine)	-	1000	+ 18 % GST Extra
Clause 4.7.2 and 4.10,Table 1 ,Sl No xviii)(Dietary folate equivalent (DFE)2))	-	600	+ 18 % GST Extra
Clause 4.7.2 and 4.10,Table 1 ,Sl No xix)(Vitamin B12)	-	1000	+ 18 % GST Extra
Clause 4.7.2 and 4.10,Table 1 ,Sl No xx)(Zinc)	-	500	+ 18 % GST Extra
Clause 4.7.2 and 4.10,Table 1 ,Sl No xxi)(Choline)	-	2500	+ 18 % GST Extra
Clause 4.7.2 and 4.10,Table 1 ,Sl No xxii)(Inositol)	-	1500	+ 18 % GST Extra
Clause 4.7.2 and 4.10,Table 1 ,Sl No xxiii)(Selenium)	-	500	+ 18 % GST Extra
Clause 4.13,Table 3 ,Sl No i)(Lead)	-	500	+ 18 % GST Extra
Clause 4.13,Table 3 ,Sl No ii)(Copper)	-	500	+ 18 % GST Extra
Clause 4.13,Table 3 ,Sl No iii)(Arsenic)	-	500	+ 18 % GST Extra
Clause 4.13,Table 3 ,Sl No iv)(Tin)	-	500	+ 18 % GST Extra
Clause 4.13,Table 3 ,Sl No v)(Cadmium)	-	500	+ 18 % GST Extra
Clause 4.13,Table 3 ,Sl No vi)(Melamine)	-	1500	+ 18 % GST Extra
Clause 4.13,Table 3 ,Sl No vii)(Total aflatoxin)	-	2500	+ 18 % GST Extra
Clause 4.13,Table 3 ,Sl No viii)(Aflatoxin B1)	-	2500	+ 18 % GST Extra
Clause 4.10,Table 2 ,Sl No i)(Aerobic plate count)	-	500	+ 18 % GST Extra
Clause 4.10,Table 2 ,Sl No ii)(Coliform Count)	-	500	+ 18 % GST Extra
Clause 4.10,Table 2 ,Sl No iii)(Staphylococcus aureus (Coagulase positive))	-	500	+ 18 % GST Extra
Clause 4.10,Table 2 ,Sl No iv)(Yeast and mould count)	-	500	+ 18 % GST Extra
Clause 4.10,Table 2 ,Sl No v)(Salmonella sp.)	-	500	+ 18 % GST Extra
Clause 4.10,Table 2 ,Sl No vi)(Listeria moncytogenes)	-	500	+ 18 % GST Extra
Clause 4.10,Table 2 ,Sl No vii)(Bacillus cereus)	-	500	+ 18 % GST Extra
Clause 4.10,Table 2 ,Sl No viii)(Sulphite reducing clostridia)	-	500	+ 18 % GST Extra
Clause 4.10,Table 2 ,Sl No ix)(Escherichia coli)	-	500	+ 18 % GST Extra
4.1(Description- IS 11536)	-	500	+ 18 % GST Extra
4.1(Description- IS 11536)	-	0	Duplicate Entry
4.7.2, Table 1 (i)(Moisture -IS 16072/IS 11623)	-	0	Duplicate Entry
4.7.2, Table 1 (ii)(Total Protein (N x 6.25)- IS 7219/IS 16634 (P-2))	-	0	Duplicate Entry
4.7.2, Table 1 (iii)(Total fat - IS 11721 OR ISO 11085)	-	0	Duplicate Entry
4.7.2, Table 1 (iv)(Total carbohydrate -Annex C IS 1656)	-	0	Duplicate Entry
4.7.2, Table 1 (v)(Total Ash-Annex C IS 14433)	-	0	Duplicate Entry
4.7.2, Table 1 (vi)(Ash insoluble in dilute hydrochloric acid-Annex D IS 14433)	-	0	Duplicate Entry
4.7.2, Table 1 (vii)(Iron - ISO 15151 or ISO 21424 or AOAC 985.35)	-	0	Duplicate Entry
4.7.2, Table 1 (viii)(Vitamin A (as retinol equivalent RE)- IS 16639)	-	0	Duplicate Entry
4.7.2, Table 1 (ix)(Vitamin C - 5838 or IS 17176)	-	0.03	Duplicate Entry
4.7.2, Table 1 (x)(Vitamin D - IS 17177)	-	0	Duplicate Entry
4.7.2, Table 1 (xi)(Crude fibre(on dry basis)- IS 10226(P-1))	-	0	Duplicate Entry
4.7.2, Table 1 (xii)(Thiamine - IS 17669)	-	0	Duplicate Entry
4.7.2, Table 1 (xiii)(Riboflavin - IS 17669)	-	0	Duplicate Entry
4.7.2, Table 1 (xiv)(Niacin equialent - IS 17669)	-	0	Duplicate Entry
4.7.2, Table 1 (xv)(Pantothenic acid - IS 16642)	-	0	Duplicate Entry
4.7.2, Table 1 (xvi)(Pyridoxine - IS 17669)	-	0	Duplicate Entry
4.7.2, Table 1 (xviii)(Dietary Folate equivalent (DFE) - AOAC 2013.13)	-	0	Duplicate Entry
4.7.2, Table 1 (xix)(Vitamin B12 -IS 16640 or AOAC 2014.02)	-	0	Duplicate Entry
4.7.2, Table 1 (xx)(Zinc - 15 of IS 1699 or ISO 15151 or ISO 21424)	-	0	Duplicate Entry
4.7.2, Table 1 (xxi)(Choline - IS 17668)	-	0	Duplicate Entry
4.7.2, Table 1 (xxii)(Inositol - 16649 or any other validated international method)	-	0	Duplicate Entry
4.7.2, Table 1 (xxiii)(Selenium -IS 15303 or ISO 15151 or ISO 20649)	-	0	Duplicate Entry
"4.10 Table 2 (i) "(Aerobic plate count-IS 5402 (Part 1))	-	0	Duplicate Entry
"4.10 Table 2 (ii) "(Coliform count-IS 5401 (Part 1))	-	0	Duplicate Entry
"4.10 Table 2 (iii) "(Staphylococcuus aureus-IS 5887 (Part 2))	-	0	Duplicate Entry
"4.10 Table 2 (iv) "(Yeast & mould count-IS 5403)	-	0	Duplicate Entry
"4.10 Table 2 (v) "(Salmonella sp.-IS 5887 (Part 3))	-	0	Duplicate Entry
"4.10 Table 2 (vi) "(Listeria monocytogenes-IS 14988 (Part 1))	-	0	Duplicate Entry
"4.10 Table 2 (vii) "(Bacillus cereus-IS 5887 (Part 6))	-	0	Duplicate Entry
"4.10 Table 2 (viii)"(Sulphite reducing clostridia-ISO 15213)	-	0	Duplicate Entry
"4.10 Table 2 (ix)"(Escherichia coli-IS 5887 (Part 1))	-	0	Duplicate Entry
4.13, Table 3 (i)(Lead - IS 12074 or AOAC 2015.01)	-	0	Duplicate Entry
4.13, Table 3 (ii)(Copper - 15 of IS 1699 or ISO 15151 or ISO 21424)	-	0	Duplicate Entry
4.13, Table 3 (iii)(Arsenic - IS 11124 or AOAC 2015.01)	-	0	Duplicate Entry
4.13, Table 3 (iv)(Tin - ISO 14377)	-	0	Duplicate Entry
4.13, Table 3 (v)(Cadimum - 15 of IS 1699 or AOAC 2015.01)	-	0	Duplicate Entry
4.13, Table 3 (vi)(Melamine - IS 16195)	-	0	Duplicate Entry
4.13, Table 3 (vii)(Total aflatoxin - IS 16287)	-	0	Duplicate Entry
4.13, Table 3 (viii)(Aflatoxin B1 -IS 16287)	-	0	Duplicate Entry
4.15.1.5(Vibrio cholerae & Vibrio parahaemolyticus)	-	500	+ 18 % GST Extra
5.1.1(Bisphenol A (BPA))	-	3000	+ 18 % GST Extra
4.3(Protein content)	-	0	Duplicate Entry
4.4(Carbohydrates)	-	0	Duplicate Entry
"4.7.2, 4.10 Table 1: SN (xvii)"(Biotin)	-	0	Duplicate Entry
"4.7.2, 4.10 Table 1: SN (xvii)"(Biotin)	-	0	Duplicate Entry
CL 4.10, Table 2 (i)(Aerobic Plate Count)	-	0	Duplicate Entry
CL 4.10, Table 2 (ii)(Coliform Count)	-	0	Duplicate Entry
CL 4.10, Table 2 (iii)(Staphylococcus Aureus (Coagulase positive))	-	0	Duplicate Entry
CL 4.10, Table 2 (iv)(Yeast and Mould Count)	-	0	Duplicate Entry
CL 4.10, Table 2 (v)(Salmonella sp)	-	0	Duplicate Entry
CL 4.10, Table 2 (vi)(Listeria monocytogenes)	-	0	Duplicate Entry
CL 4.10, Table 2 (vii)(Bacillus cereus)	-	0	Duplicate Entry
CL 4.10, Table 2 (viii)(Sulphite reducing clostridia)	-	0	Duplicate Entry
CL 4.10, Table 2 (ix)(E. coli)	-	0	Duplicate Entry
4.6(Sodium-IS 12760)	-	500	+ 18 % GST Extra
Clause 4.7.2 and 4.10,Table 1 ,Sl No i)(Moisture)	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No ii)(Total Protein)	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No iii)(Total Fat)	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No iV)(Total Carbohydrates)	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No v)(Total Ash)	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No vi)(Acid insoluble ash in dilute hydrochloric acid)	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No vii)(Iron)	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No viii)(Vitamin A (as Retinol equivalent RE))	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No ix)(Vitamin C)	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No x)(Vitamon D)	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No xi)(Crude fibre (on dry basis))	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No xii)(Thiamine)	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No xiii)(Riboflavin)	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No xiv)(Niacin equivalent)	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No xv)(Pantothenic acid)	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No xvi)(Pyridoxine)	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No xvii)(Biotine)	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No xviii)(Dietary folate equivalent (DFE)2))	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No xix)(Vitamin B12)	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No xx)(Zinc)	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No xxi)(Choline)	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No xxii)(Inositol)	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No xxiii)(Selenium)	-	0	Duplicate Entry
Clause 4.13,Table 3 ,Sl No i)(Lead)	-	0	Duplicate Entry
Clause 4.13,Table 3 ,Sl No ii)(Copper)	-	0	Duplicate Entry
Clause 4.13,Table 3 ,Sl No iii)(Arsenic)	-	0	Duplicate Entry
Clause 4.13,Table 3 ,Sl No iv)(Tin)	-	0	Duplicate Entry
Clause 4.13,Table 3 ,Sl No v)(Cadmium)	-	0	Duplicate Entry
Clause 4.13,Table 3 ,Sl No vi)(Melamine)	-	0	Duplicate Entry
Clause 4.13,Table 3 ,Sl No vii)(Total aflatoxin)	-	0	Duplicate Entry
Clause 4.13,Table 3 ,Sl No viii)(Aflatoxin B1)	-	0	Duplicate Entry
Clause 4.10,Table 2 ,Sl No i)(Aerobic plate count)	-	0	Duplicate Entry
Clause 4.10,Table 2 ,Sl No ii)(Coliform Count)	-	0	Duplicate Entry
Clause 4.10,Table 2 ,Sl No iii)(Staphylococcus aureus (Coagulase positive))	-	0	Duplicate Entry
Clause 4.10,Table 2 ,Sl No iv)(Yeast and mould count)	-	0	Duplicate Entry
Clause 4.10,Table 2 ,Sl No v)(Salmonella sp.)	-	0	Duplicate Entry
Clause 4.10,Table 2 ,Sl No vi)(Listeria moncytogenes)	-	0	Duplicate Entry
Clause 4.10,Table 2 ,Sl No vii)(Bacillus cereus)	-	0	Duplicate Entry
Clause 4.10,Table 2 ,Sl No viii)(Sulphite reducing clostridia)	-	0	Duplicate Entry
Clause 4.10,Table 2 ,Sl No ix)(Escherichia coli)	-	0	Duplicate Entry
4.1(Description- IS 11536)	-	0	Duplicate Entry
4.6(Sodium-IS 12760)	-	0	Duplicate Entry
5.1.1(Bisphenol A (BPA))	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No i)(Moisture)	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No ii)(Total Protein)	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No iii)(Total Fat)	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No iV)(Total Carbohydrates)	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No v)(Total Ash)	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No vi)(Acid insoluble ash in dilute hydrochloric acid)	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No vii)(Iron)	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No viii)(Vitamin A (as Retinol equivalent RE))	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No ix)(Vitamin C)	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No x)(Vitamon D)	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No xi)(Crude fibre (on dry basis))	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No xii)(Thiamine)	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No xiii)(Riboflavin)	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No xiv)(Niacin equivalent)	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No xv)(Pantothenic acid)	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No xvi)(Pyridoxine)	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No xvii)(Biotine)	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No xviii)(Dietary folate equivalent (DFE)2))	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No xix)(Vitamin B12)	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No xx)(Zinc)	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No xxi)(Choline)	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No xxii)(Inositol)	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No xxiii)(Selenium)	-	0	Duplicate Entry
Clause 4.13,Table 3 ,Sl No i)(Lead)	-	0	Duplicate Entry
Clause 4.13,Table 3 ,Sl No ii)(Copper)	-	0	Duplicate Entry
Clause 4.13,Table 3 ,Sl No iii)(Arsenic)	-	0	Duplicate Entry
Clause 4.13,Table 3 ,Sl No iv)(Tin)	-	0	Duplicate Entry
Clause 4.13,Table 3 ,Sl No v)(Cadmium)	-	0	Duplicate Entry
Clause 4.13,Table 3 ,Sl No vi)(Melamine)	-	0	Duplicate Entry
Clause 4.13,Table 3 ,Sl No vii)(Total aflatoxin)	-	0	Duplicate Entry
Clause 4.13,Table 3 ,Sl No viii)(Aflatoxin B1)	-	0	Duplicate Entry
Clause 4.10,Table 2 ,Sl No i)(Aerobic plate count)	-	0	Duplicate Entry
Clause 4.10,Table 2 ,Sl No ii)(Coliform Count)	-	0	Duplicate Entry
Clause 4.10,Table 2 ,Sl No iii)(Staphylococcus aureus (Coagulase positive))	-	0	Duplicate Entry
Clause 4.10,Table 2 ,Sl No iv)(Yeast and mould count)	-	0	Duplicate Entry
Clause 4.10,Table 2 ,Sl No v)(Salmonella sp.)	-	0	Duplicate Entry
Clause 4.10,Table 2 ,Sl No vi)(Listeria moncytogenes)	-	0	Duplicate Entry
Clause 4.10,Table 2 ,Sl No vii)(Bacillus cereus)	-	0	Duplicate Entry
Clause 4.10,Table 2 ,Sl No viii)(Sulphite reducing clostridia)	-	0	Duplicate Entry
Clause 4.10,Table 2 ,Sl No ix)(Escherichia coli)	-	0	Duplicate Entry
4.1(Description- IS 11536)	-	0	Duplicate Entry
4.6(Sodium-IS 12760)	-	0	Duplicate Entry
5.1.1(Bisphenol A (BPA))	-	0	Duplicate Entry
Clause 4.7.2 and 4.10,Table 1 ,Sl No i)(Moisture)	-	0	0
Clause 4.7.2 and 4.10,Table 1 ,Sl No ii)(Total Protein)	-	0	0
Clause 4.7.2 and 4.10,Table 1 ,Sl No iii)(Total Fat)	-	0	0
Clause 4.7.2 and 4.10,Table 1 ,Sl No iV)(Total Carbohydrates)	-	0	0
Clause 4.7.2 and 4.10,Table 1 ,Sl No v)(Total Ash)	-	0	0
Clause 4.7.2 and 4.10,Table 1 ,Sl No vi)(Acid insoluble ash in dilute hydrochloric acid)	-	0	0
Clause 4.7.2 and 4.10,Table 1 ,Sl No vii)(Iron)	-	0	0
Clause 4.7.2 and 4.10,Table 1 ,Sl No viii)(Vitamin A (as Retinol equivalent RE))	-	0	0
Clause 4.7.2 and 4.10,Table 1 ,Sl No ix)(Vitamin C)	-	0	0
Clause 4.7.2 and 4.10,Table 1 ,Sl No x)(Vitamon D)	-	0	0
Clause 4.7.2 and 4.10,Table 1 ,Sl No xi)(Crude fibre (on dry basis))	-	0	0
Clause 4.7.2 and 4.10,Table 1 ,Sl No xii)(Thiamine)	-	0	0
Clause 4.7.2 and 4.10,Table 1 ,Sl No xiii)(Riboflavin)	-	0	0
Clause 4.7.2 and 4.10,Table 1 ,Sl No xiv)(Niacin equivalent)	-	0	0
Clause 4.7.2 and 4.10,Table 1 ,Sl No xv)(Pantothenic acid)	-	0	0
Clause 4.7.2 and 4.10,Table 1 ,Sl No xvi)(Pyridoxine)	-	0	0
Clause 4.7.2 and 4.10,Table 1 ,Sl No xvii)(Biotine)	-	0	0
Clause 4.7.2 and 4.10,Table 1 ,Sl No xviii)(Dietary folate equivalent (DFE)2))	-	0	0
Clause 4.7.2 and 4.10,Table 1 ,Sl No xix)(Vitamin B12)	-	0	0
Clause 4.7.2 and 4.10,Table 1 ,Sl No xx)(Zinc)	-	0	0
Clause 4.7.2 and 4.10,Table 1 ,Sl No xxi)(Choline)	-	0	0
Clause 4.7.2 and 4.10,Table 1 ,Sl No xxii)(Inositol)	-	0	0
Clause 4.7.2 and 4.10,Table 1 ,Sl No xxiii)(Selenium)	-	0	0
Clause 4.13,Table 3 ,Sl No i)(Lead)	-	0	0
Clause 4.13,Table 3 ,Sl No ii)(Copper)	-	0	0
Clause 4.13,Table 3 ,Sl No iii)(Arsenic)	-	0	0
Clause 4.13,Table 3 ,Sl No iv)(Tin)	-	0	0
Clause 4.13,Table 3 ,Sl No v)(Cadmium)	-	0	0
Clause 4.13,Table 3 ,Sl No vi)(Melamine)	-	0	0
Clause 4.13,Table 3 ,Sl No vii)(Total aflatoxin)	-	0	0
Clause 4.13,Table 3 ,Sl No viii)(Aflatoxin B1)	-	0	0
Clause 4.10,Table 2 ,Sl No i)(Aerobic plate count)	-	0	0
Clause 4.10,Table 2 ,Sl No ii)(Coliform Count)	-	0	0
Clause 4.10,Table 2 ,Sl No iii)(Staphylococcus aureus (Coagulase positive))	-	0	0
Clause 4.10,Table 2 ,Sl No iv)(Yeast and mould count)	-	0	0
Clause 4.10,Table 2 ,Sl No v)(Salmonella sp.)	-	0	0
Clause 4.10,Table 2 ,Sl No vi)(Listeria moncytogenes)	-	0	0
Clause 4.10,Table 2 ,Sl No vii)(Bacillus cereus)	-	0	0
Clause 4.10,Table 2 ,Sl No viii)(Sulphite reducing clostridia)	-	0	0
Clause 4.10,Table 2 ,Sl No ix)(Escherichia coli)	-	0	0
4.1(Description- IS 11536)	-	0	0
4.6(Sodium-IS 12760)	-	0	0
5.1.1(Bisphenol A (BPA))	-	0	0

21 Mar, 2028

-
Included w.e.f 07.01.2025

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number