BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

14028 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

11311

Central Institute of Petrochemicals Engineering and Technology (CIPET), BADDI

9163904

IS 12701 (1996)

Rotational moulded polyethylene water storage tanks - specification (First Revision)

Capacity upto 1000 litre

13850 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.3(Carbon Black Content )	-	1850	925 Tank + 925 Lid
4.2.3(Carbon Dispersion Test)	-	1400	700 Tank + 700 Lid
5(Types and Features )	-	0	--
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	250	--
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	500	--
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	250	--
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	500	--
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	500	--
5.3(Types and Features )	-	600	300 Tank + 300 Lid
5.4(Wall Thickness above effective height)	-	500	250 + 250 outer layer
6.1(Finish)	-	300	--
7.1.1(Resistance to Deformation)	-	700	--
7.2(Resistance to Impact)	-	1100	--
7.4(Tensile Strength)	-	1350	1100 + 250 specimen charges
7.5(Flexural Modulus)	-	1600	1100 + 500 Specimen charges
7.6(overall Migration)	-	2200	1700 + 500 Specimen charges
9.1(Man-Hole and Hand-Hole Lids)	-	1050	--
9.1(Lid Thickness)	-	250	--
9.2.1(Man-Hole and Hand-Hole Lids)	-	400	--
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	250	--
7.1.2(Resistance to Deformation)	-	700	--

16 May, 2028

-
-

11312

Central Institute of Petrochemicals Engineering and Technology (CIPET), BADDI

9163904

IS 14333 (1996)

High Density Polyethylene Pipe For Sewerage -

All

8681 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Colour)	-	300	-
6(Dimensions of pipes)	-	250	-
7(Visual Appearance)	-	300	-
8.1(Hydraulic characteristics)	-	6400	-
8.2(Reversion)	-	1000	-
8.3(Density)	-	500	-
8.4(Melt Flow Rate)	-	1100	-
Cl. 8.5, IS 2530-1963, Cl. 10(Cabon Black Content)	-	925	-
Cl. 8.5, IS 2530-1963, Cl. 16(Carbon Black Dispersion)	-	700	-

16 May, 2028

-
-

11313

Central Institute of Petrochemicals Engineering and Technology (CIPET), BADDI

9163904

IS 14151 : Part 1 (1999)

Irrigation equipment - Sprinkler pipes - Specification: Part 1 polyethylene pipes (First Revision)

All

14519 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(melt flow rating (MFR) shall not exceed 1.10 g/10 min.)	-	1100	-
4.1.1(density shall be between 940.4 kg/m’ and 958.4 kg/m3 (both inclusive) when determined at 27°C according to procedure prescribed in Annex A of IS 7328. The value of the density shall also not differ from the nominal value by more than 3 kg/m2 as per 5.2.1.1 of IS 7328.)	-	1125	-
Cl. 4.2 , IS 2530-1963, Cl. 10(Cabon Black Content)	-	1625	-
5.1 table -1(DIMENSIONS OF PIPES)	-	500	-
6.1(VISUAL APPEARANCE)	-	300	-
7.1 Table -2(Hydraulic Characteristics)	-	6400	-
7.2(Reversion Test)	-	1000	-
7.3(Tensile Test)	-	1350	-
7.4table-2(Fusion Compatibility Test)	-	6400	-
7.5(Density)	-	500	-
7.6(Melt now Rate (MFR))	-	1100	-

16 May, 2028

-
-

11314

Central Institute of Petrochemicals Engineering and Technology (CIPET), BADDI

9163904

IS 2508 (2016)

Polyethylene films and sheets - Specification (Third Revision)

Type I & Type II

13531 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.5(Melt Flow Index. Cl 6, 7 of IS 13360(Part-4/Section-1))	-	1100	--
5.1.1(Appearance)	-	100	--
5.1.2(Film Form)	-	100	--
5.1.3(Odour)	-	100	--
5.1.4(Density, Cl.5 of IS 13360(Part-3/Section-1))	-	500	--
5.1.6a(Carbon Black Content, Annex-A)	-	925	--
5.1.6b(Ash Content, Annex-A)	-	950	--
5.1.6c(Carbon Black Dispersion, Cl.16 of IS 2530)	-	700	--
5.2.2(Tolerance on Thickness, Annex-A)	-	500	--
6.1, Table 1(Tensile strength at break. A) Machine Direction. IS 13360 (Part 5/Sec 1))	-	1350	1100 + 250(Specimen Charges)
6.1, Table 1(Tensile strength at break. B) Transverse Direction. IS 13360 (Part 5/Sec 3))	-	1100	--
6.1, Table 1(Ageing test at (70-1)c for 7 days , cl 4 IS 7016 )	-	4300	--
6.1, Table 1(Elongation at break ,A) Machine direction .IS 13360(Part-5/sec-1) )	-	0	--
6.1, Table 1(Elongation at break ,B) Cross-machine direction..IS 13360(Part-5/sec-3) )	-	0	--
6.1, Table 1(Dartimpact strength Method B of IS 13360 (Part-5/sec-6) )	-	1000	--
6.1, Table 1(Tear resistence. A) Machine direction Annex B)	-	1000	750 + 250 (Specimen Charges)
6.1, Table 1(Tear resistence. B) Transverse direction )	-	750	--
7.1. Table 2(Tensile strength at break A) Machine direction IS 13360 (Part-5/sec-1) )	-	1350	1100 + 250(Specimen Charges)
7.1. Table 2(Tensile strength at break,B) Crosse machine direction IS 13360 (Part-5/sec-3) )	-	1100	--
7.1. Table 2(Ageing test at (70-1)c for 7 days , cl 4 IS 7016 )	-	4300	--
7.1. Table 2(Elongation at break , A) Machine direction IS 13360 (Part-5/sec-3) IS 13360 (Part-5/sec-1) )	-	0	--
7.1. Table 2(Elongation at break , A) Transverse direction IS 13360 (Part-5/sec-3) )	-	0	--
7.1. Table 2(Dart impact strenght , Method A of IS 3360 (Part-5/sec-6) )	-	1000	--
8.1, Table 3(Tensile properties ,A) Yield strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0	--
8.1, Table 3(Tensile properties , B) Break strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0	--
8.1, Table 3(Tensile properties ,C) Yield elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0	--
8.1, Table 3(Tensile properties ,D) Break elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0	--
8.1, Table 3(Tear resistance , Annex B)	-	0	--
8.1, Table 3(Puncture resistance , Annex C)	-	0	--
9.1, Table 4(Tensile properties ,A) Yield strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0	--
9.1, Table 4(Tensile properties , B) Break strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0	--
9.1, Table 4(Tensile properties ,C) Yield elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0	--
9.1, Table 4(Tensile properties ,D) Break elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do)	-	0	--
9.1, Table 4(Tear resistance , Annex B)	-	0	--
9.1, Table 4(Puncture resistance , Annex C)	-	0	--
Clause 5.2.3(Tolerance on Width)	-	0	--

16 May, 2028

-
for Type I &II only

11315

Allumera Engineering Solutions Pvt ltd

8175206

IS 455 (2015)

Portland slag cement - Specification

PSC

19750 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6 - Table - 1 i(Insoluble residue - Cl 6.9 of IS 4032:1985)	-	2000	-
6 - Table - 1 ii(Magnesia - Cl 6.8 of IS 4032:1985)	-	2000	-
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 6.11 of IS 4032:1985)	-	1600	-
6 - Table - 1 iv(Sulphide sulphur (S) - Cl 6.12 of IS 4032:1985)	-	2000	-
6 - Table - 1 v(Loss on ignition - Cl 6.2 of IS 4032:1985)	-	1650	-
6 - Table - 1 vi(Chloride content - Cl 4.13 of IS 4032:1985)	-	1250	-
6 - Table - 1 vii( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	2500	-
7 Table 1 i(Fineness IS 4031(Part 2))	-	1000	-
7 Table 1 ii a(Soundness, Le-Chate1ier expansion IS 4031(Part 3) )	-	1000	-
7 Table 1 ii b(Soundness, Autoclave expansion IS 4031(Part 3) )	-	1600	-
7 Table 1 iii a(Setting Time ( by Vicat Apparatus ),Initial IS 4031(Part 5))	-	550	-
7 Table 1 iii b(Setting Time ( by Vicat Apparatus ), Final IS 4031(Part 5))	-	550	-
7 Table 1 iv a(Compretsive Strenqth .72 ± 1 hr IS 4031(Part 6))	-	1450	-
7 Table 1 iv b(Compretsive Strenqth 168 ± 2 hr IS 4031(Part 6))	-	1650	-
7 Table 1 iv c(Compretsive Strenqth 672 ± 4 hr IS 4031(Part 6))	-	1850	-
7 Table 1 v(Transverse strength (optional) IS 4031(Part 8) )	-	3500	-
11.3(Consistency(IS:4031(Pt-4)-1988)	-	600	-

13 Dec, 2026

-
Exclusion: Cl.7 Table-2 (v) (Transverse Strength)

11316

Allumera Engineering Solutions Pvt ltd

8175206

IS 1489 (Part 1) (2015)

Portland pozzolana cement - Specification: Part 1 fly Ash Based

Portland Pozzolana Cement- Fly Ash Based

22500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7 -Table 2- i(Fineness 4031 Part 2)	-	1750	-
7 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	1500	-
7 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	1600	-
7 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	1500	-
7 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	1500	-
7 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	1500	-
7 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	1650	-
7 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	1700	-
7 -Table 2- v(Transverse Strength - IS 4031 Part 8 (Optional))	-	3500	-
7 -Table 2- vi(Drying Shrinkage- IS 4031 Part 10)	-	3500	-
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	1200	-
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	1000	-
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	1000	-
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	1000	-
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	2000	-
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	1500	-
11(MARKING)	-	500	-

13 Dec, 2026

-
Exclusion: Cl.7 Table-2 (v) (Transverse Strength)

11317

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 278 (2009)

Galvanized steel barbed wire for fencing - Specification (Fourth Revision)

4500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Type A/Type B)	-	100	-
5 Table-1(Sizes Diameter of Line wire)	-	100	-
5 Table-1(Sizes Diamater of Point wire)	-	100	-
5 Table-1(Sizes Mass of Completed barbed wire)	-	100	-
5 Table-1(Sizes Distance between two barbs)	-	100	-
7.1(Manufacture)	-	50	-
7.2(Manufacture)	-	50	-
7.3(Manufacture)	-	50	-
8(CHROMATING)	-	200	-
9.1(Freedom from defects)	-	50	-
9.2(Freedom from defects)	-	100	-
12.1(Tensile Strength)	-	450	-
12.1(Breaking load)	-	450	-
12.2.1(Mass of zinc coating (line wire))	-	300	-
12.2.2(Mass of zinc coating (point wire))	-	200	-
12.2(Uniformity of zinc coating)	-	100	-
12.3(Ductility)	-	300	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	100	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	-
Cl. 7.2(Cut Angle)	-	100	-
Cl. 7.2(Length of Barbs)	-	100	-
Cl. 7.2(Finishing of Barbs)	-	100	-
Cl. 7.1(General)	-	100	-
4(Type A/Type B)	-	100	-
5 Table-1(Sizes Diameter of Line wire)	-	100	-
5 Table-1(Sizes Diamater of Point wire)	-	100	-
5 Table-1(Sizes Mass of Completed barbed wire)	-	100	-
5 Table-1(Sizes Distance between two barbs)	-	100	-
7.1(Manufacture)	-	50	-
7.2(Manufacture)	-	50	-
7.3(Manufacture)	-	50	-
8(CHROMATING)	-	200	-
9.1(Freedom from defects)	-	50	-
9.2(Freedom from defects)	-	100	-
12.1(Tensile Strength)	-	450	-
12.1(Breaking load)	-	450	-
12.2.1(Mass of zinc coating (line wire))	-	300	-
12.2.2(Mass of zinc coating (point wire))	-	200	-
12.2(Uniformity of zinc coating)	-	100	-
12.3(Ductility)	-	300	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	100	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	-
Cl. 7.2(Cut Angle)	-	100	-
Cl. 7.2(Length of Barbs)	-	100	-
Cl. 7.2(Finishing of Barbs)	-	100	-
Cl. 7.1(General)	-	100	-
4(Type A/Type B)	-	100	-
5 Table-1(Sizes Diameter of Line wire)	-	100	-
5 Table-1(Sizes Diamater of Point wire)	-	100	-
5 Table-1(Sizes Mass of Completed barbed wire)	-	100	-
5 Table-1(Sizes Distance between two barbs)	-	100	-
7.1(Manufacture)	-	50	-
7.2(Manufacture)	-	50	-
7.3(Manufacture)	-	50	-
8(CHROMATING)	-	200	-
9.1(Freedom from defects)	-	100	-
9.2(Freedom from defects)	-	500	-
12.1(Tensile Strength)	-	450	-
12.1(Breaking load)	-	450	-
12.2.1(Mass of zinc coating (line wire))	-	300	-
12.2.2(Mass of zinc coating (point wire))	-	200	-
12.2(Uniformity of zinc coating)	-	100	-
12.3(Ductility)	-	300	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	100	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	-
Cl. 7.2(Cut Angle)	-	50	-
Cl. 7.2(Length of Barbs)	-	50	-
Cl. 7.2(Finishing of Barbs)	-	50	-
Cl. 7.1(General)	-	50	-
4(Type A/Type B)	-	-	-
5 Table-1(Sizes Diameter of Line wire)	-	-	-
5 Table-1(Sizes Diamater of Point wire)	-	-	-
5 Table-1(Sizes Mass of Completed barbed wire)	-	-	-
5 Table-1(Sizes Distance between two barbs)	-	-	-
7.1(Manufacture)	-	-	-
7.2(Manufacture)	-	-	-
7.3(Manufacture)	-	-	-
8(CHROMATING)	-	-	-
9.1(Freedom from defects)	-	-	-
9.2(Freedom from defects)	-	-	-
12.1(Tensile Strength)	-	-	-
12.1(Breaking load)	-	-	-
12.2.1(Mass of zinc coating (line wire))	-	-	-
12.2.2(Mass of zinc coating (point wire))	-	-	-
12.2(Uniformity of zinc coating)	-	-	-
12.3(Ductility)	-	-	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-	-
Cl. 7.2(Cut Angle)	-	-	-
Cl. 7.2(Length of Barbs)	-	-	-
Cl. 7.2(Finishing of Barbs)	-	-	-
Cl. 7.1(General)	-	-	-

31 Dec, 2026

-
-

11318

DELHI TEST HOUSE, Azadhpur

8131406

IS 4199 (2001)

Toilet soap, liquid - Specification (Third Revision)

5300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4.1(Description)	-	500	5300/-
Cl.4.3(Sedimentation)	-	800	5300/-
Cl.4.5.1(Phenolic substances such as cresylic acid, if added)	-	800	5300/-
Cl.4.6, 6.3.1 - Table 1 - Sl. No.i)(Total fatty matter)	-	800	5300/-
Cl.4.6, 6.3.1 - Table 1 - Sl. No.ii)(Matter insoluble in alcohol)	-	800	5300/-
Cl.4.6, 6.3.1 - Table 1 - Sl. No.iii)(Free caustic Alkali, as K2O)	-	800	5300/-
Cl.4.6, 6.3.1 - Table 1 - Sl. No.iv)(Synthetic detergent)	-	800	5300/-

17 Jun, 2027

-
Included w.e.f.13-05-2022 Exclusion: Cl 4.7.2.2 (Dermatological Safety(Requirement for ECO MARK)) Cl 4.7.2.1 (Phosphate (Requirement for ECO MARK)) Cl 4.7.2.1 (Synthetic detergent (Requirement for ECO MARK))

11319

DELHI TEST HOUSE, Azadhpur

8131406

IS 2888 (2004)

Toilet soap - Specification (Third Revision)

6900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.3(Phenolic substances, IS 286)	-	800	6900/-
5.5, Table-1 (ii), Grade-1, Gr-2 & Gr-3(Rosin acids, percent by mass of total fatty matter, IS 286 )	-	800	800/-
5.5, Table-1 (iii), Grade-1, Gr-2 & Gr-3(Free caustic alkali, as sodium hydroxide (NaOH), IS 286)	-	800	800/-
5.5, Table-1 (iv), Grade-2 & Grade-3(Matter insoluble in alcohol, IS 286)	-	800	800/-
5.5, Table-1 (v), Grade-1, Grade-2 & Grade-3(Chloride (as sodium chloride), IS 286)	-	800	800/-
5.5, Table-1 (vi), Grade-1, Grade-2 & Grade-3(Free carbonated alkali)	-	800	800/-
5.5, Table-1 (vii), Grade-3(Lather)	-	800	800/-
5.5, Table-1 (vii), Grade-2(Lather)	-	800	800/-
5.5, Table-1 (vii), Grade-1(Lather)	-	800	800/-

17 Jun, 2027

-
Included w.e.f.13-05-2022 Exclusion: Cl 5.3 Ingredients (Phenolic substances)

11320

Allumera Engineering Solutions Pvt ltd

8175206

IS 3812 (Part 1) (2013)

Pulverized fuel ash - Specification: Part 1 For use as pozzolana in cement, cement mortar and concrete

pozzolonic use in cement nortar & concrete

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 6.1, Table 1 - i(Silicon dioxide (SiO2) plus aluminium oxide (Al2O3) plus ironoxide (Fe2O3) - IS 1727)	-	2000	-
Cl. 6.1, Table 1 - ii(Silicon dioxide (SiO2) - IS 1727)	-	2000	-
Cl. 6.1, Table 1 - iii(Reactive Silica - Annex B)	-	2500	-
Cl. 6.1, Table 1 - iv(Magnesium oxide (MgO) - IS 1727)	-	1500	-
Cl. 6.1, Table 1 - v( Total sulphur as sulphur trioxide (SO3) - IS 1727)	-	750	-
Cl. 6.1, Table 1 - vi( Available alkalis as equivalent sodium oxide (Na2O) - Annex C)	-	1550	-
Cl. 6.1, Table 1 - vii( Total Chlorides - IS 4032)	-	1000	-
Cl. 6.1, Table 1 - viii( Loss on ignition - IS 1727)	-	750	-
Cl. 6.2(Moisture content of the fly ash when supplied in dry condition - Annex D)	-	450	-
7.1-Table 2(i)(PHYSICAL REQUIREMENTS-Fineness)	-	1000	-
7.1-Table 2(ii)(PHYSICAL REQUIREMENTS-Particles retained on 45 micron IS sieve)	-	550	-
7.1-Table 2(iii)(PHYSICAL REQUIREMENTS-Average compressive strength)	-	1750	-
7.1-Table 2(iv)(PHYSICAL REQUIREMENTS-Compressive strength at 28 days)	-	1750	-
7.1-Table 2(v)(PHYSICAL REQUIREMENTS-Soundness by autoclave test )	-	2000	-
7.2(Uniformity Requirements)	-	1500	-

13 Dec, 2026

-
-

11321

Allumera Engineering Solutions Pvt ltd

8175206

IS 383 (2016)

Coarse and Fine Aggregate for Concrete - Specification (Third Revision)

Coarse and fine aggregate/maufactured aggr for concrete

29500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2- TABLE-2- (i) IS-2386 (P-2)(Coal and Lignite (coarse aggregate ))	-	1500	-
5.2- TABLE-2- (ii) IS-2386 (P-2)(Clay lumps (coarse aggregate ))	-	1500	-
5.2- TABLE-2- (iii) IS-2386 (P-1)(Material fine aggregater than 75 micron (fine aggregate))	-	1250	-
5.2- TABLE-2- (iv) IS-2386 (P-2)(Soft fragments (coarse aggregate))	-	1000	-
5.2- TABLE-2- (vi) IS-2386 (P-2)(Total deleterious material (fine aggregate))	-	2650	-
5.3-IS: 2386 (P-1)(Combined elongation & flakiness index (coarse aggregate))	-	2500	-
5.4.1 (a)(mechanical properties- Aggregate Crushing Value/Ten Percent Fines Value)	-	1500	-
5.4.1 (b)(mechanical properties- Aggregate Crushing Value/Ten Percent Fines Value)	-	1500	-
5.4.2(a)( Aggregates Impact Value)	-	1000	-
5.4.2(b)( Aggregates Impact Value)	-	1000	-
5.4.3(a)( Aggregate Abrasion Value)	-	1500	-
5.4.3(b)( Aggregate Abrasion Value)	-	1750	-
5.5-IS: 2386 (P-5)(Soundness (fine aggregate))	-	3500	-
5.5-IS: 2386 (P-5)(Soundness (coarse aggregate))	-	3500	-
Clause 5.7- Table 3 (i) (TotalAlkali content as Na2O equivalent )	-	2500	-
5.7-Table-3-(II) BN EN: 1744(Total sulphate content (coarse aggregate))	-	1500	-
5.7-Table-3-(III) IS:14959 (P-2)(Water soluble chloride content (fine aggregate))	-	1500	-
5.7-Table-3-(Iv) IS: 2386 (P-3)(Water absorption (fine aggregate))	-	1500	-
5.7-Table-3-(v) IS: 2386 (P-3)(specific gravity(fine aggregate))	-	1500	-
5.2 (5.2.2, 5.2.1, 5.2.3, shale table-2 ) (Deleterious material (Clay lumps, coal & lignite, material finer than 75 micron IS sieve, Soft fragments,shale))	-	2650	-
5.6-IS: 2386 (P-7)(Alkali Aggregate Reaction (coarse aggregate))	-	3000	-
5.7 table 4 (Calcium oxide)	-	1500	-

13 Dec, 2026

-
-

11322

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 1538 (1993)

Cast iron fittings for pressure pipes for water, gas and sewage - Specification (Third Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(The metal used for the manufacture of pipe shall be of a quality not less than that specified for grade FG 150 of IS 210 )	-	500	-
5.1(tensile strength)	-	1500	-
6.1(Brinell hardness tests)	-	500	-
8(Hydrostatic Test)	-	950	-
9.1,Table 2 & 3(DI)	-	50	-
9.1,Table 2 & 3(P)	-	50	-
9.1,Table 2 & 3(g)	-	50	-
9.1,Table 2 & 3(h)	-	50	-
9.1,Table 2 & 3(K)	-	50	-
9.1,Table 2 & 3(L)	-	50	-
9.1,Table 2 & 3(M)	-	50	-
9.1,Table 2 & 3(N)	-	50	-
9.1,Table 2 & 3(f)	-	50	-
9.1,Table 4(D)	-	50	-
9.1,Table 4(a)	-	50	-
9.1,Table 4(b)	-	50	-
9.1,Table 4(s)	-	50	-
9.1,Table 4(r)	-	50	-
9.1,Table 5(D)	-	50	-
9.1,Table 5(g)	-	50	-
9.1,Table 5(a)	-	50	-
9.1,Table 5(b)	-	50	-
9.1,Table 5(c)	-	50	-
9.1,Table 5(f)	-	50	-
9.1,Table 5(s)	-	50	-
9.1,Table 5(C)	-	50	-
9.1,Table 5(Holes No)	-	50	-
9.1,Table 5(Holes diameter)	-	50	-
9.1,Table 5(Diameterof Bolts)	-	50	-
9.1,Table 6(D)	-	50	-
9.1,Table 6(C)	-	50	-
9.1,Table 6(Holes No)	-	50	-
9.1,Table 6(Holes diameter)	-	50	-
9.1,Table 6(Diameterof Bolts)	-	50	-
9.1&11.1,Table 7,8&9(e)	-	50	-
9.1&11.1,Table 7,8&9(l)	-	50	-
9.1&11.1,Table 7,8&9(Mass (Approx))	-	50	-
9.1&11.1,Table 10 to13(e)	-	50	-
9.1&11.1,Table 10 to13(r)	-	50	-
9.1&11.1,Table 10 to13(a)	-	50	-
9.1&11.1,Table 10 to13(b)	-	50	-
9.1&11.1,Table 10 to13(Mass (Approx))	-	50	-
9.1&11.1,Table 14(Nominal Diameter)	-	50	-
9.1&11.1,Table 14(e)	-	50	-
9.1&11.1,Table 14(e1)	-	50	-
9.1&11.1,Table 14(l)	-	50	-
9.1&11.1,Table 14(h)	-	50	-
9.1&11.1,Table 14(Mass (Approx))	-	50	-
9.1&11.1,Table 15(e)	-	50	-
9.1&11.1,Table 15(l)	-	50	-
9.1&11.1,Table 15(Nominal Diameter)	-	50	-
9.1&11.1,Table 15(e1)	-	50	-
9.1&11.1,Table 15(k)	-	50	-
9.1&11.1,Table 15(Mass (Approx))	-	50	-
9.1&11.1,Table 16(e)	-	50	-
9.1&11.1,Table 16(l)	-	50	-
9.1&11.1,Table 16(h)	-	50	-
9.1&11.1,Table 16(Mass (Approx))	-	50	-
9.1&11.1,Table 17(e1)	-	50	-
9.1&11.1,Table 17(l1)	-	50	-
9.1&11.1,Table 17(Nominal Diameter)	-	50	-
9.1&11.1,Table 17(e2)	-	50	-
9.1&11.1,Table 17(l2)	-	50	-
9.1&11.1,Table 17(l3)	-	50	-
9.1&11.1,Table 17(l)	-	50	-
9.1&11.1,Table 17(Mass)	-	50	-
9.1&11.1,Table 18(a)	-	50	-
9.1&11.1,Table 18(P)	-	50	-
9.1&11.1,Table 18(Mass (Approx))	-	50	-
9.1&11.1,Table 19(DC)	-	50	-
9.1&11.1,Table 19(e)	-	50	-
9.1&11.1,Table 19(a)	-	50	-
9.1&11.1,Table 19(l)	-	50	-
9.1&11.1,Table 19(Mass (Approx))	-	50	-
9.1&11.1,Table 20(DI)	-	50	-
9.1&11.1,Table 20(h)	-	50	-
9.1&11.1,Table 20(Mass (Approx))	-	50	-
9.1&11.1,Table 21(e)	-	50	-
9.1&11.1,Table 21(r)	-	50	-
9.1&11.1,Table 21(a)	-	50	-
9.1&11.1,Table 21(b)	-	50	-
9.1&11.1,Table 21(Mass (Approx))	-	50	-
9.1&11.1,Table 22(e)	-	50	-
9.1&11.1,Table 22(r)	-	50	-
9.1&11.1,Table 22(a)	-	50	-
9.1&11.1,Table 22(b)	-	50	-
9.1&11.1,Table 22(c)	-	50	-
9.1&11.1,Table 22(a)	-	50	-
9.1&11.1,Table 22(f)	-	50	-
9.1&11.1,Table 22(g)	-	50	-
9.1&11.1,Table 23(e)	-	50	-
9.1&11.1,Table 23(r)	-	50	-
9.1&11.1,Table 23(a)	-	50	-
9.1&11.1,Table 23(l)	-	50	-
9.1&11.1,Table 23(Mass (Approx))	-	50	-
9.1&11.1,Table 24(e)	-	50	-
9.1&11.1,Table 24(l)	-	50	-
9.1&11.1,Table 24(Nominal Diameter)	-	50	-
9.1&11.1,Table 24(e1)	-	50	-
9.1&11.1,Table 24(h)	-	50	-
9.1&11.1,Table 24(Mass (Approx))	-	50	-
9.1&11.1,Table 25(e)	-	50	-
9.1&11.1,Table 25(l)	-	50	-
9.1&11.1,Table 25(h)	-	50	-
9.1&11.1,Table 25(Mass (Approx))	-	50	-
9.1&11.1,Table 26(e1)	-	50	-
9.1&11.1,Table 26(h1)	-	50	-
9.1&11.1,Table 26(Nominal Diameter)	-	50	-
9.1&11.1,Table 26(e2)	-	50	-
9.1&11.1,Table 26(l2)	-	50	-
9.1&11.1,Table 26(l3)	-	50	-
9.1&11.1,Table 26(l)	-	50	-
9.1&11.1,Table 26(Mass (Approx))	-	50	-
9.1&11.1,Table 27(dn)	-	50	-
9.1&11.1,Table 27(e1)	-	50	-
9.1&11.1,Table 27(b)	-	50	-
9.1&11.1,Table 27(l3)	-	50	-
9.1&11.1,Table 27(l2)	-	50	-
9.1&11.1,Table 27(e2)	-	50	-
9.1&11.1,Table 27(r)	-	50	-
9.1&11.1,Table 27(a)	-	50	-
9.1&11.1,Table 27(l1)	-	50	-
9.1&11.1,Table 27(Mass)	-	50	-
9.1&11.1,Table 28(D)	-	50	-
9.1&11.1,Table 28(t)	-	50	-
9.1&11.1,Table 28(Mass (Approx))	-	50	-
12.1 to 12.7(Coating )	-	500	-

31 Dec, 2026

-
Included w.e.f. 07.11.2023

11323

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 1879 (2010)

Malleable cast iron pipe fittings - Specification (Third Revision)

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.1(Type of Fittings - IS 1879)	-	200	BIS 10% discount
5.1.2(Size designation - IS 1879)	-	200	BIS 10% discount
5.1.2.1(Equal fitting - IS 1879)	-	200	BIS 10% discount
5.1.2.2(Unequal fitting -IS 1879)	-	200	BIS 10% discount
5.1.3(Right and Left hand thread - IS 1879)	-	200	BIS 10% discount
5.1.1(Code Number -IS 1879)	-	200	BIS 10% discount
6.1(Tensile Strength - IS 14329)	-	500	BIS 10% discount
6.1(Elongation - Is 14329)	-	500	BIS 10% discount
7.2- Table 2(Wall thickness of fittings - IS 1879)	-	200	BIS 10% discount
7.5 - Table 2(Projection of Rainforcement - IS 1879)	-	200	BIS 10% discount
7.5 - Table 3(Width of Rainforcement - IS 1879)	-	200	BIS 10% discount
7.1 - Table 4 to Table 27(a - IS 1879)	-	200	BIS 10% discount
7.1 - Table 28(d -IS 1879)	-	200	BIS 10% discount
8.1(Thread -IS 554)	-	1000	BIS 10% discount
8.2(Alignment of threads -IS 554)	-	1000	BIS 10% discount
9(Freedom from defects )	-	100	BIS 10% discount
10.i)(Mass of Galvanized coating )	-	500	BIS 10% discount
10.ii)( Uniformity of Galvanized coating-IS 2633)	-	500	BIS 10% discount
10.iii)(Adhesion of Galvanized coating IS 2629)	-	500	BIS 10% discount
10.iv)(Freedom from defects IS 4759)	-	100	BIS 10% discount
11(Pressure Test)	-	500	BIS 10% discount
8.1 (chem)(Thread -IS 554)	-	250	BIS 10% discount
5.1.1(Type of Fittings - IS 1879)	-	200	-
5.1.2(Size designation - IS 1879)	-	200	-
5.1.2.1(Equal fitting - IS 1879)	-	200	-
5.1.2.2(Unequal fitting -IS 1879)	-	200	-
5.1.3(Right and Left hand thread - IS 1879)	-	200	-
5.1.1(Code Number -IS 1879)	-	200	-
6.1(Tensile Strength - IS 14329)	-	500	-
6.1(Elongation - Is 14329)	-	500	-
7.2- Table 2(Wall thickness of fittings - IS 1879)	-	200	-
7.5 - Table 2(Projection of Rainforcement - IS 1879)	-	200	-
7.5 - Table 3(Width of Rainforcement - IS 1879)	-	200	-
7.1 - Table 4 to Table 27(a - IS 1879)	-	200	-
7.1 - Table 28(d -IS 1879)	-	200	-
8.1(Thread -IS 554)	-	1000	-
8.2(Alignment of threads -IS 554)	-	1000	-
9(Freedom from defects )	-	100	-
10.i)(Mass of Galvanized coating )	-	500	-
10.ii)( Uniformity of Galvanized coating-IS 2633)	-	500	-
10.iii)(Adhesion of Galvanized coating IS 2629)	-	500	-
10.iv)(Freedom from defects IS 4759)	-	100	-
11(Pressure Test)	-	500	-
8.1 (chem)(Thread -IS 554)	-	250	-
12(Compression Test)	-	250	-

31 Dec, 2026

-
Included w.e.f. 07.11.2023

11324

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 1825 (1983)

Specification for aluminium alloy milk cans (Second Revision)

7200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 3.1,3.2,3.3(Copper)	-	100	BIS 10% discount
Cl. 3.1,3.2,3.3(Manganese)	-	100	BIS 10% discount
Cl. 3.1,3.2,3.3(Silicon)	-	100	BIS 10% discount
Cl. 3.1,3.2,3.3(Iron)	-	100	BIS 10% discount
Cl. 3.1,3.2,3.3(Aluminium)	-	100	BIS 10% discount
Cl. 3.1,3.2,3.3(Magnesium)	-	100	BIS 10% discount
Cl. 3.1,3.2,3.3(Zinc)	-	100	BIS 10% discount
Cl. 3.1,3.2,3.3(Titanium)	-	100	BIS 10% discount
Cl. 3.1,3.2,3.3(Vanadium)	-	100	BIS 10% discount
Cl. 3.1,3.2,3.3(Chromium)	-	100	BIS 10% discount
8(a) Rated Capacity)	-	300	BIS 10% discount
8(b) Point of Capacity)	-	300	BIS 10% discount
8(c) Batch OR Code No.)	-	100	BIS 10% discount
8(d) BIS Mark)	-	100	BIS 10% discount
8(e) Manufacturer's Trade Mark )	-	100	BIS 10% discount
2(Capacity)	-	300	BIS 10% discount
4 Fig. 1(Dimensions & Shape)	-	200	BIS 10% discount
4 Fig. 1(A)	-	100	BIS 10% discount
4 Fig. 1(B)	-	100	BIS 10% discount
4 Fig. 1(C )	-	100	BIS 10% discount
4 Fig. 1(D)	-	100	BIS 10% discount
4 Fig. 1(E)	-	100	BIS 10% discount
4 Fig. 1(F)	-	100	BIS 10% discount
4 Fig. 1(G)	-	100	BIS 10% discount
4 Fig. 1(H)	-	100	BIS 10% discount
4 Fig. 1(BOTTOM BAND)	-	100	BIS 10% discount
4 Fig. 1(Dimension)	-	200	BIS 10% discount
4 Fig. 1(HANDLE )	-	100	BIS 10% discount
4 Fig. 1(LID)	-	200	BIS 10% discount
4 Fig. 1(Hole Dia 8 ,2 holes)	-	100	BIS 10% discount
4 Fig. 1(Hole Dia 12, 3 holes)	-	100	BIS 10% discount
5(a)Transport cans shall consist of a body, bottom band)	-	100	BIS 10% discount
5(lid and handles.)	-	200	BIS 10% discount
5(b)Minimum Thickness(in mm))	-	100	BIS 10% discount
5(i) Body and Neck)	-	100	BIS 10% discount
5(ii) Bottom)	-	100	BIS 10% discount
5(iii) Lid (Inner))	-	100	BIS 10% discount
5(iv) Lid (Outer))	-	100	BIS 10% discount
5(c) Mode of Shaping)	-	100	BIS 10% discount
5(i) If the thickness at shoulder is less than 2.5 mm a )	-	100	BIS 10% discount
5(ii) Brinell Hardness 85 HB Min.)	-	100	BIS 10% discount
5(d) BOTTOM BAND- It shall be shrunk fit with a )	-	100	BIS 10% discount
5(proper locking arrangement on the body. This shall)	-	100	BIS 10% discount
5(be followed by brazing or welding all round.)	-	100	BIS 10% discount
5(e) HANDLES (as per Cl 5.6))	-	100	BIS 10% discount
5(f) SEALING LUG (as per Cl 5.7))	-	100	BIS 10% discount
5(g)Workmanship and Finish- All brazing or welding shall )	-	100	BIS 10% discount
5(be sound , free of porosity and shall be finished smooth .)	-	100	BIS 10% discount
5(h) Mass 6.5 Kg. Min.)	-	100	BIS 10% discount
7(i) Air Pressure Test (Cl 7.1))	-	300	BIS 10% discount
7(ii) Drop Test (Cl 7.2))	-	300	BIS 10% discount
7(iii) The cans when filled with water and inverted shall not show any profuse leakage through lids. )	-	400	BIS 10% discount
8(a) Rated Capacity)	-	300	BIS 10% discount
8(b) Point of Capacity)	-	300	BIS 10% discount
8(c) Batch OR Code No.)	-	100	BIS 10% discount
8(d) BIS Mark)	-	100	BIS 10% discount
8(e) Manufacturer's Trade Mark )	-	100	BIS 10% discount
Cl. 3.1,3.2,3.3(Copper)	-	100	-
Cl. 3.1,3.2,3.3(Manganese)	-	100	-
Cl. 3.1,3.2,3.3(Silicon)	-	100	-
Cl. 3.1,3.2,3.3(Iron)	-	100	-
Cl. 3.1,3.2,3.3(Aluminium)	-	100	-
Cl. 3.1,3.2,3.3(Magnesium)	-	100	-
Cl. 3.1,3.2,3.3(Zinc)	-	100	-
Cl. 3.1,3.2,3.3(Titanium)	-	100	-
Cl. 3.1,3.2,3.3(Vanadium)	-	100	-
Cl. 3.1,3.2,3.3(Chromium)	-	100	-
8(a) Rated Capacity)	-	300	-
8(b) Point of Capacity)	-	300	-
8(c) Batch OR Code No.)	-	100	-
8(d) BIS Mark)	-	100	-
8(e) Manufacturer's Trade Mark )	-	100	-
2(Capacity)	-	300	-
4 Fig. 1(Dimensions & Shape)	-	200	-
4 Fig. 1(A)	-	100	-
4 Fig. 1(B)	-	100	-
4 Fig. 1(C )	-	100	-
4 Fig. 1(D)	-	100	-
4 Fig. 1(E)	-	100	-
4 Fig. 1(F)	-	100	-
4 Fig. 1(G)	-	100	-
4 Fig. 1(H)	-	100	-
4 Fig. 1(BOTTOM BAND)	-	100	-
4 Fig. 1(Dimension)	-	200	-
4 Fig. 1(HANDLE )	-	100	-
4 Fig. 1(LID)	-	100	-
4 Fig. 1(Hole Dia 8 ,2 holes)	-	100	-
4 Fig. 1(Hole Dia 12, 3 holes)	-	100	-
5(a)Transport cans shall consist of a body, bottom band)	-	100	-
5(lid and handles.)	-	100	-
5(b)Minimum Thickness(in mm))	-	100	-
5(i) Body and Neck)	-	100	-
5(ii) Bottom)	-	100	-
5(iii) Lid (Inner))	-	100	-
5(iv) Lid (Outer))	-	100	-
5(c) Mode of Shaping)	-	100	-
5(i) If the thickness at shoulder is less than 2.5 mm a )	-	100	-
5(ii) Brinell Hardness 85 HB Min.)	-	100	-
5(d) BOTTOM BAND- It shall be shrunk fit with a )	-	100	-
5(proper locking arrangement on the body. This shall)	-	100	-
5(be followed by brazing or welding all round.)	-	100	-
5(e) HANDLES (as per Cl 5.6))	-	100	-
5(f) SEALING LUG (as per Cl 5.7))	-	100	-
5(g)Workmanship and Finish- All brazing or welding shall )	-	100	-
5(be sound , free of porosity and shall be finished smooth .)	-	100	-
5(h) Mass 6.5 Kg. Min.)	-	100	-
7(i) Air Pressure Test (Cl 7.1))	-	300	-
7(ii) Drop Test (Cl 7.2))	-	300	-
7(iii) The cans when filled with water and inverted shall not show any profuse leakage through lids. )	-	100	-
8(a) Rated Capacity)	-	300	-
8(b) Point of Capacity)	-	300	-
8(c) Batch OR Code No.)	-	100	-
8(d) BIS Mark)	-	100	-
8(e) Manufacturer's Trade Mark )	-	100	-
Cl. 3.1,3.2,3.3(Copper)	-	100	-
Cl. 3.1,3.2,3.3(Manganese)	-	100	-
Cl. 3.1,3.2,3.3(Silicon)	-	100	-
Cl. 3.1,3.2,3.3(Iron)	-	100	-
Cl. 3.1,3.2,3.3(Aluminium)	-	100	-
Cl. 3.1,3.2,3.3(Magnesium)	-	100	-
Cl. 3.1,3.2,3.3(Zinc)	-	100	-
Cl. 3.1,3.2,3.3(Titanium)	-	100	-
Cl. 3.1,3.2,3.3(Vanadium)	-	100	-
Cl. 3.1,3.2,3.3(Chromium)	-	100	-
8(a) Rated Capacity)	-	300	-
8(b) Point of Capacity)	-	300	-
8(c) Batch OR Code No.)	-	100	-
8(d) BIS Mark)	-	100	-
8(e) Manufacturer's Trade Mark )	-	100	-
2(Capacity)	-	300	-
4 Fig. 1(Dimensions & Shape)	-	200	-
4 Fig. 1(A)	-	100	-
4 Fig. 1(B)	-	100	-
4 Fig. 1(C )	-	100	-
4 Fig. 1(D)	-	100	-
4 Fig. 1(E)	-	100	-
4 Fig. 1(F)	-	100	-
4 Fig. 1(G)	-	100	-
4 Fig. 1(H)	-	100	-
4 Fig. 1(BOTTOM BAND)	-	100	-
4 Fig. 1(Dimension)	-	200	-
4 Fig. 1(HANDLE )	-	100	-
4 Fig. 1(LID)	-	100	-
4 Fig. 1(Hole Dia 8 ,2 holes)	-	100	-
4 Fig. 1(Hole Dia 12, 3 holes)	-	100	-
5(a)Transport cans shall consist of a body, bottom band)	-	100	-
5(lid and handles.)	-	100	-
5(b)Minimum Thickness(in mm))	-	100	-
5(i) Body and Neck)	-	100	-
5(ii) Bottom)	-	100	-
5(iii) Lid (Inner))	-	100	-
5(iv) Lid (Outer))	-	100	-
5(c) Mode of Shaping)	-	100	-
5(i) If the thickness at shoulder is less than 2.5 mm a )	-	100	-
5(ii) Brinell Hardness 85 HB Min.)	-	100	-
5(d) BOTTOM BAND- It shall be shrunk fit with a )	-	100	-
5(proper locking arrangement on the body. This shall)	-	100	-
5(be followed by brazing or welding all round.)	-	100	-
5(e) HANDLES (as per Cl 5.6))	-	100	-
5(f) SEALING LUG (as per Cl 5.7))	-	100	-
5(g)Workmanship and Finish- All brazing or welding shall )	-	100	-
5(be sound , free of porosity and shall be finished smooth .)	-	100	-
5(h) Mass 6.5 Kg. Min.)	-	100	-
7(i) Air Pressure Test (Cl 7.1))	-	300	-
7(ii) Drop Test (Cl 7.2))	-	300	-
7(iii) The cans when filled with water and inverted shall not show any profuse leakage through lids. )	-	100	-
8(a) Rated Capacity)	-	300	-
8(b) Point of Capacity)	-	300	-
8(c) Batch OR Code No.)	-	100	-
8(d) BIS Mark)	-	100	-
8(e) Manufacturer's Trade Mark )	-	100	-

31 Dec, 2026

-
Included w.e.f. 07.11.2023

11325

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 2039 : Part 1 to 3 (1991)

Steel tubes for bicycle and cycle rickshaws - Specification (Second Revision)

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 5.1 Table 1(Carbon)	-	100	BIS 10% discount
Cl. 5.1 Table 1(Silicon)	-	100	BIS 10% discount
Cl. 5.1 Table 1(Manganese)	-	100	BIS 10% discount
Cl. 5.1 Table 1(Phosphorous)	-	100	BIS 10% discount
Cl. 5.1 Table 1(Sulphur)	-	100	BIS 10% discount
Cl. 6.1(Workmanship)	-	200	BIS 10% discount
Cl. 6.2(Fin Height)	-	2000	BIS 10% discount
Cl. 6.3(Straightness)	-	2000	BIS 10% discount
Cl. 8.1(Tensile Strength)	-	1000	BIS 10% discount
Cl. 8.1(Yield Strength)	-	1000	BIS 10% discount
Cl. 8.1(Elongation)	-	500	BIS 10% discount
Cl. 8.2(Drift Expansion Test- IS 2335)	-	1500	BIS 10% discount
Cl. 8.3(Flattening Test-IS 2338)	-	1500	BIS 10% discount
Cl. 4.2.1(Diameter)	-	600	BIS 10% discount
Cl. 4.2.2(Thickness)	-	500	BIS 10% discount
Cl. 3.2.1, Table 4(Yield Stress)	-	500	BIS 10% discount
Cl. 3.2.1, Table 4(UTS)	-	1000	BIS 10% discount
Cl. 3.2.1, Table 4(Elongation)	-	500	BIS 10% discount
Cl. 3.2.2, Table 2(Drift Expansion Test- IS 2335)	-	1500	BIS 10% discount
Cl. 3.2.3, Table 3(Flattening Test-IS 2338)	-	1500	BIS 10% discount
Cl. 4.2.3(Length)	-	500	BIS 10% discount
Cl. 3.1(Carbon)	-	100	BIS 10% discount
Cl. 3.1(Silicon)	-	100	BIS 10% discount
Cl. 3.1(Manganese)	-	100	BIS 10% discount
Cl. 3.1(Phosphorous)	-	100	BIS 10% discount
Cl. 3.1(Sulphur)	-	100	BIS 10% discount
Cl. 4.2.1, Table 7(Yield Stress)	-	1000	BIS 10% discount
Cl. 4.2.1, Table 7(UTS)	-	1000	BIS 10% discount
Cl. 4.2.1, Table 7(Crushing)	-	600	BIS 10% discount
Cl. 4.2.2, Table 8(Drift Expansion Test- IS 2335)	-	1000	BIS 10% discount
Cl. 4.2.3, Table 9(Flattening Test-IS 2338)	-	1500	BIS 10% discount
Cl. 9(Diameter)	-	600	BIS 10% discount
Cl. 5.2.2(Mean Thickness)	-	500	BIS 10% discount
Cl. 5.2.3, Table 6(Length)	-	500	BIS 10% discount

31 Dec, 2026

-
Included w.e.f. 07.11.2023

11326

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 4270 (2001)

Steel tubes used for water wells specification (Third Revision)

11250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 6(Tensile Test & Flattening Test)	-	2250	-
Cl 7(Outer Diameter, Thickness, Mass & Straightness)	-	3500	-
Cl 9(Pipe ends, Angle of bevel & Root Face )	-	1500	-
Cl 10(Outer Diameter & Overall Length)	-	700	-
Cl 12(Bituminous Coating & Galvanizing )	-	2000	-
Cl 14(Workmanship)	-	350	-
5.2(phosphorus)	-	300	-
Cl 14(Workmanship)	-	350	-
5.2(sulphur)	-	300	-
Cl 6(Tensile Test & Flattening Test)	-	2250	-
Cl 7(Outer Diameter, Thickness, Mass & Straightness)	-	3500	-
Cl 9(Pipe ends, Angle of bevel & Root Face )	-	1500	-
Cl 10(Outer Diameter & Overall Length)	-	700	-
Cl 12(Bituminous Coating & Galvanizing )	-	2000	-
Cl 14(Workmanship)	-	350	-
Cl 6(Tensile Test & Flattening Test)	-	2250	-
Cl 7(Outer Diameter, Thickness, Mass & Straightness)	-	3500	-
Cl 9(Pipe ends, Angle of bevel & Root Face )	-	1500	-
Cl 10(Outer Diameter & Overall Length)	-	700	-
Cl 12(Bituminous Coating & Galvanizing )	-	2000	-
Cl 14(Workmanship)	-	350	-
11.0(Alignment test IS 4270: 2001)	-	350	-

31 Dec, 2026

-
Included w.e.f. 07.11.2023

11327

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 3589 (2001)

Steel pipes for water and sewage (168.3 To 2540 Mm Outside Diameter) - Specification (Third Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1 Table 2 Table 3(Carbon Content IS 228)	-	100	-
8.1 Table 2 Table 3(Manganese Content IS 228)	-	100	-
8.1 Table 2 Table 3(Phosphorus Content IS 228)	-	100	-
8.1 Table 2 Table 3(Sulphur Content IS 228)	-	100	-
9.3(Guided bend test(For SAW Pipes))	-	500	-
10(Hydaulic pressure test)	-	1000	-
11.1, Table 5.(Outside Diameter (OD))	-	500	-
11.1, Table 5.(Thickness)	-	200	-
11.1, Table 5.(Mass)	-	200	-
12.3.3(Ovality)	-	200	-
12.5(Strightness)	-	1000	-
14.1(Visual inspection, Appearance and Workmanship)	-	200	-
14.4(Visual inspection, Appearance and Workmanship-Dent Depth(below 610 mm OD))	-	200	-
14.4(Visual inspection, Appearance and Workmanship-Dent Length)	-	200	-
8.1(CE)	-	500	-
9.3(Guided Bend Test (for SAW Pipes))	-	500	-
9.2.3(Flattening Test for seamless pipes)	-	500	-
9.2.1(Flattening test for ERW pipes )	-	500	-
9.1(Tensile test-Yield Strength)	-	1400	-
9.1(Tensile test-Strength)	-	1000	-
9.1(Tensile test- Elongation)	-	1000	-
8.1 Table 2 Table 3(Carbon Content IS 228)	-	100	-
8.1 Table 2 Table 3(Manganese Content IS 228)	-	100	-
8.1 Table 2 Table 3(Phosphorus Content IS 228)	-	100	-
8.1 Table 2 Table 3(Sulphur Content IS 228)	-	100	-
9.3(Guided bend test(For SAW Pipes))	-	500	-
10(Hydaulic pressure test)	-	1000	-
11.1, Table 5.(Outside Diameter (OD))	-	500	-
11.1, Table 5.(Thickness)	-	200	-
11.1, Table 5.(Mass)	-	200	-
12.3.3(Ovality)	-	200	-
12.5(Strightness)	-	1000	-
14.1(Visual inspection, Appearance and Workmanship)	-	200	-
14.4(Visual inspection, Appearance and Workmanship-Dent Depth(below 610 mm OD))	-	200	-
14.4(Visual inspection, Appearance and Workmanship-Dent Length)	-	200	-
8.1(CE)	-	500	-
8.1 Table 2 Table 3(Carbon Content IS 228)	-	-	-
8.1 Table 2 Table 3(Manganese Content IS 228)	-	-	-
8.1 Table 2 Table 3(Phosphorus Content IS 228)	-	-	-
8.1 Table 2 Table 3(Sulphur Content IS 228)	-	-	-
9.3(Guided bend test(For SAW Pipes))	-	-	-
10(Hydaulic pressure test)	-	-	-
11.1, Table 5.(Outside Diameter (OD))	-	-	-
11.1, Table 5.(Thickness)	-	-	-
11.1, Table 5.(Mass)	-	-	-
12.3.3(Ovality)	-	-	-
12.5(Strightness)	-	-	-
14.1(Visual inspection, Appearance and Workmanship)	-	-	-
14.4(Visual inspection, Appearance and Workmanship-Dent Depth(below 610 mm OD))	-	-	-
14.4(Visual inspection, Appearance and Workmanship-Dent Length)	-	-	-
8.1(CE)	-	-	-

31 Dec, 2026

-
Included w.e.f. 07.11.2023

11328

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 9523 (2000)

Ductile iron fittings for pressure pipes for water, gas and sewage - Specification (First Revision)

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5(Thickness)	-	500	-
Cl 6 & Table 4,5,6&7(Design & Tolerance)	-	1000	-
Cl 7(Rubber Gasket)	-	1000	-
Cl 9(Tensile Test & Hardness Test)	-	1500	-
Cl 10(Hydrostatic Test)	-	1000	-
Cl 11(Nominal Diameter, Ovality, Dimensions, No. Of Holes & Bolt Sizes)	-	1000	-
Cl 13(Coating)	-	1000	-
Cl 5(Thickness)	-	500	-
Cl 6 & Table 4,5,6&7(Design & Tolerance)	-	1000	-
Cl 7(Rubber Gasket)	-	1000	-
Cl 9(Tensile Test & Hardness Test)	-	1	-
Cl 10(Hydrostatic Test)	-	1000	-
Cl 11(Nominal Diameter, Ovality, Dimensions, No. Of Holes & Bolt Sizes)	-	1000	-
Cl 13(Coating)	-	1000	-

31 Dec, 2026

-
Included w.e.f. 07.11.2023

11329

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 11722 (1986)

Specification for thin walled flexible quick coupling pipes

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Pipe Manufacturing Process )	-	100	10% discount for BIS
5,5.1(Workmsnship &Finish)	-	100	10% discount for BIS
6 &7 ; Table 1(Dimension & Tolerance)	-	200	10% discount for BIS
8(Length)	-	100	10% discount for BIS
9(Galvanizing ,IS 4736)	-	800	10% discount for BIS
10,10.1(Couplers for thin walled coupling pipes ; Appendix A)	-	1000	10% discount for BIS
10,10.2 ,Table 1(Coupler,Type 1B, IS 5382)	-	1000	10% discount for BIS
10,10.3,Table 2(Leakage Test)	-	500	10% discount for BIS
11, Table 3(Angularity of Joint)	-	500	10% discount for BIS
12(Straightness)	-	1000	10% discount for BIS
13.1(Flattening Test,IS 2328)	-	500	10% discount for BIS
13.2(Tensile Test ,; IS 1608(P1))	-	1000	10% discount for BIS
14(Hydraulic Test)	-	900	10% discount for BIS
4.1(Pipe Manufacturing Process )	-	100	10% discount for BIS
5,5.1(Workmsnship &Finish)	-	100	10% discount for BIS
6 &7 ; Table 1(Dimension & Tolerance)	-	100	10% discount for BIS
4.1(Pipe Manufacturing Process )	-	100	-
5,5.1(Workmsnship &Finish)	-	100	-
6 &7 ; Table 1(Dimension & Tolerance)	-	200	-
8(Length)	-	100	-
9(Galvanizing ,IS 4736)	-	800	-
10,10.1(Couplers for thin walled coupling pipes ; Appendix A)	-	1000	-
10,10.2 ,Table 1(Coupler,Type 1B, IS 5382)	-	1000	-
10,10.3,Table 2(Leakage Test)	-	500	-
11, Table 3(Angularity of Joint)	-	500	-
12(Straightness)	-	1000	-
13.1(Flattening Test,IS 2328)	-	500	-
13.2(Tensile Test ,; IS 1608(P1))	-	1000	-
14(Hydraulic Test)	-	900	-
4.1(Pipe Manufacturing Process )	-	100	-
5,5.1(Workmsnship &Finish)	-	100	-
6 &7 ; Table 1(Dimension & Tolerance)	-	200	-

31 Dec, 2026

-
Included w.e.f. 07.11.2023

11330

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 9890 (1981)

Specification for general purpose ball valves

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Nom. size. )	-	1000	-
5(End connections)	-	1000	-
6(Drain Connection)	-	1000	-
7(Joints)	-	1000	-
10(Trim)	-	1000	-
3(Nom. size. )	-	1000	-
5(End connections)	-	1000	-
6(Drain Connection)	-	1000	-
7(Joints)	-	1000	-
10(Trim)	-	1000	-
3(Nom. size. )	-	1000	-
5(End connections)	-	1000	-
6(Drain Connection)	-	1000	-
7(Joints)	-	1000	-
10(Trim)	-	1000	-

31 Dec, 2026

-
Included w.e.f. 07.11.2023

11331

BIS, Eastern Regional Laboratory (ERL)

None

IS 5414 (1995)

Gaskets and packings - Gland packing jute and hemp - Specification (First Revision)

Rs.825/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.2 (Lubricant Content -A-1 of IS 5414)	-
4.3 (Graphite or Mica Content - A-2 of IS 5414)	-
4.4 (Thickness)	-
4.5 (Weight per metre)	-
5 (Workmanship)	-

-
Except breaking load test

11332

Allumera Engineering Solutions Pvt ltd

8175206

IS 269 (2015)

Ordinary portland cement - Specification (Sixth Revision)

OPC-33gr,OPC-43gr,OPC-43S,OPC-53gr,OPC-53S

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1 Table-2 i.(Ratio of percentage of lime to percentage of silica, alumina and iron oxide)	-	6500	GST@ 18.5 percent is applicable to above testing charges.
6.1 Table-2 ii.(Ratio of percentage of alumina to that of iron oxide)	-	2000	-
6.1 Table-2 iii.(Insoluble residue)	-	1500	-
6.1 Table-2 iv(Magnesia)	-	1500	-
6.1 Table-2 v(Total Sulphur Content calculated as Sulphuric Anhydride)	-	1000	-
6.1 Table-2 vi(Loss on ignition)	-	1500	-
6.1 Table-2 vii(Chloride content)	-	1500	-
6.1 Table-2 viii(Alkali content)	-	2000	-
7 Table-3 i.(Fineness)	-	1000	-
7 Table-3 ii a(Expansion by Le Chatelier)	-	1000	-
7 Table-3 ii b(Expansion by Autoclave)	-	2000	-
7 Table-3 iii a(Setting Time Initial)	-	900	-
7 Table-3 iii b(Setting Time Final)	-	900	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	800	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	900	-
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	1500	-
7 Table-3 v(Transverse Strength - IS 4031 Part 8 (Optional))	-	0	under exclusion
11(Marking)	-	500	visual & obervation remarks

13 Dec, 2026

-
Exclusion: Cl.7 Table-3 v (Transverse Strength - IS 4031 Part 8 (Optional))

11333

THE SOUTH INDIA TEXTILE RESEARCH ASSOCIATION (SITRA), COIMBATORE

6165234

IS 17334 (2019)

Medical textiles – Surgical gowns and surgical drapes – Specification

56130 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1 Table 1 (x.)(Resistance to microbial penetration — Wet (IB))	-	14000	-
7.1 Table 1 (ix.)(Resistance to microbial penetration — Dry (CFU))	-	13500	-
7.1 Table 1 (iv.)(Viral resistance)	-	10000	-
7.1 Table 1 (iii.)(Blood resistance)	-	4500	-
7.1 Table 1 (xi.)(Biocompatability evaluation Cytotoxicity, Irritation and skin sensitization)	-	1600	-
7.1, Table 1 (i.)(Impact penetration)	-	600	-
7.1 Table 1 (xii.)(Moisture vapour transmission rate (Max.))	-	3000	-
7.1 Table 1 (v.)(Particle release)	-	3000	-
7.1 Table 1 (ii.)(Hydrostatic resistance (cmwc))	-	550	-
7.1 Table 1 (viii.)(Cleanliness–microbial (CFU/100 cm2))	-	3750	-
7.1 Table 1 (vii.)(bursting strength (dry and wet) (kPa))	-	650	-
7.1 Table 1 (vi.)(tensile strength (dry and wet) (N))	-	980	-

-
-

11334

INDIAN TESTING LABORATORY PRIVATE LIMITED, GREATER NOIDA

8171306

IS 21 (1992)

Wrought aluminium and aluminium alloys for manufacture of utensils specification (Fourth Revision)

19000, 19500, 31000, 31500, 64430

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP')(Bend Test (Radius of Bend))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP')(Tensile Strength)	-	500	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP')(0.2 Percent Proof Stress)	-	500	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'W')(Bend Test (Radius of Bend))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'W')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'W')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'W')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'W')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'W')(Tensile Strength)	-	500	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'W')(0.2 Percent Proof Stress)	-	500	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'O')(Bend Test (Radius of Bend))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'O')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'O')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'O')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'O')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'O')(Tensile Strength)	-	500	-
4.2, Table 1of IS:21 (Designation 64430)(Aluminium)	-	250	-
4.2, Table 1of IS:21 (Designation 64430)(Lead)	-	250	-
4.2, Table 1of IS:21 (Designation 64430)(Chromium)	-	250	-
4.2, Table 1of IS:21 (Designation 64430)(Titanium and or other grain refining elements)	-	250	-
4.2, Table 1of IS:21 (Designation 64430)(Zinc)	-	250	-
4.2, Table 1of IS:21 (Designation 64430)(Manganese)	-	250	-
4.2, Table 1of IS:21 (Designation 64430)(Iron)	-	250	-
4.2, Table 1of IS:21 (Designation 64430)(Silicon)	-	250	-
4.2, Table 1of IS:21 (Designation 64430)(Magnesium)	-	250	-
4.2, Table 1of IS:21 (Designation 64430)(Copper)	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H4')(Bend Test (Radius of Bend))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H4')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H4')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H4')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H4')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H4')(Tensile Strength)	-	500	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H3')(Bend Test (Radius of Bend))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H3')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H3')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H3')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H3')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H3')(Tensile Strength)	-	500	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H2')(Bend Test (Radius of Bend))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H2')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H2')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H2')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H2')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H2')(Tensile Strength)	-	500	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H1')(Bend Test (Radius of Bend))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H1')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H1')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H1')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H1')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'H1')(Tensile Strength)	-	500	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'O')(Bend Test (Radius of Bend))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'O')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'O')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'O')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'O')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31500, 'O')(Tensile Strength)	-	500	-
4.2, Table 1of IS:21 (Designation 31500)(Aluminium)	-	250	-
4.2, Table 1of IS:21 (Designation 31500)(Titanium and or other grain refining elements)	-	250	-
4.2, Table 1of IS:21 (Designation 31500)(Lead)	-	250	-
4.2, Table 1of IS:21 (Designation 31500)(Zinc)	-	250	-
4.2, Table 1of IS:21 (Designation 31500)(Manganese)	-	250	-
4.2, Table 1of IS:21 (Designation 31500)(Iron)	-	250	-
4.2, Table 1of IS:21 (Designation 31500)(Silicon)	-	250	-
4.2, Table 1of IS:21 (Designation 31500)(Magnesium)	-	250	-
4.2, Table 1of IS:21 (Designation 31500)(Copper)	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H4')(Bend Test (Radius of Bend))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H4')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H4')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H4')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H4')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H4')(Tensile Strength)	-	500	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H3')(Bend Test (Radius of Bend))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H3')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H3')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H3')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H3')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H3')(Tensile Strength)	-	500	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H2')(Bend Test (Radius of Bend))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H2')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H2')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H2')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H2')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H2')(Tensile Strength)	-	500	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H1')(Bend Test (Radius of Bend))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H1')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H1')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H1')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H1')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'H1')(Tensile Strength)	-	500	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'O')(Bend Test (Radius of Bend))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'O')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'O')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'O')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'O')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 31000, 'O')(Tensile Strength)	-	500	-
4.2, Table 1of IS:21 (Designation 31000)(Aluminium)	-	250	-
4.2, Table 1of IS:21 (Designation 31000)(Lead)	-	250	-
4.2, Table 1of IS:21 (Designation 31000)(Chromium)	-	250	-
4.2, Table 1of IS:21 (Designation 31000)(Titanium and or other grain refining elements)	-	250	-
4.2, Table 1of IS:21 (Designation 31000)(Zinc)	-	250	-
4.2, Table 1of IS:21 (Designation 31000)(Manganese)	-	250	-
4.2, Table 1of IS:21 (Designation 31000)(Iron)	-	250	-
4.2, Table 1of IS:21 (Designation 31000)(Silicon)	-	250	-
4.2, Table 1of IS:21 (Designation 31000)(Magnesium)	-	250	-
4.2, Table 1of IS:21 (Designation 31000)(Copper)	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H4')(Bend Test (Radius of Bend))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H4')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H4')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H4')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H4')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H4')(Tensile Strength)	-	500	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H2')(Bend Test (Radius of Bend))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H2')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H2')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H2')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H2')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'H2')(Tensile Strength)	-	500	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'O')(Bend Test (Radius of Bend))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'O')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'O')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'O')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'O')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19500, 'O')(Tensile Strength)	-	500	-
4.2, Table 1of IS:21 (Designation 19500)(Aluminium)	-	250	-
4.2, Table 1of IS:21 (Designation 19500)(Cu+Si+Fe+Mn+Zn)	-	1000	-
4.2, Table 1of IS:21 (Designation 19500)(Lead)	-	250	-
4.2, Table 1of IS:21 (Designation 19500)(Zinc)	-	250	-
4.2, Table 1of IS:21 (Designation 19500)(Manganese)	-	250	-
4.2, Table 1of IS:21 (Designation 19500)(Iron)	-	250	-
4.2, Table 1of IS:21 (Designation 19500)(Silicon)	-	250	-
4.2, Table 1of IS:21 (Designation 19500)(Copper)	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H4')(Bend Test (Radius of Bend))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H4')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H4')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H4')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H4')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H4')(Tensile Strength)	-	500	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H3')(Bend Test (Radius of Bend))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H3')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H3')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H3')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H3')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H3')(Tensile Strength)	-	500	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H2')(Bend Test (Radius of Bend))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H2')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H2')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H2')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H2')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H2')(Tensile Strength)	-	500	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H1')(Bend Test (Radius of Bend))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H1')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H1')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H1')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H1')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'H1')(Tensile Strength)	-	500	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'O')(Bend Test (Radius of Bend))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'O')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'O')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'O')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'O')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	250	-
4.2, Table 2 of IS:21 (Designation & Condition 19000, 'O')(Tensile Strength)	-	500	-
4.2, Table 1of IS:21 (Designation 19000)(Lead)	-	250	-
4.2, Table 1of IS:21 (Designation 19000)(Cu+Mg+Si+Fe+Mn+Zn)	-	1000	-
4.2, Table 1of IS:21 (Designation 19000)(Aluminium)	-	250	-
4.2, Table 1of IS:21 (Designation 19000)(Zinc)	-	250	-
4.2, Table 1of IS:21 (Designation 19000)(Manganese)	-	250	-
4.2, Table 1of IS:21 (Designation 19000)(Iron)	-	250	-
4.2, Table 1of IS:21 (Designation 19000)(Silicon)	-	250	-
4.2, Table 1of IS:21 (Designation 19000)(Magnesium)	-	250	-
4.2, Table 1of IS:21 (Designation 19000)(Copper)	-	250	-
4.1, & 4.1.1(Lead)	-	250	-
4.1.2(Aluminium)	-	250	-

15 Aug, 2028

-
-

11335

Chem-Tech Laboratories Private Limited, Pune

7170010

IS 17042 : Part 1 (2020)

Diesel Engines — NOx Reduction Agent AUS 32 Part 1 Quality Requirements ( First Revision )

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5 and table 1(Alkalinity as NH3)	-	450	-
5 and table 1(Urea content)	-	350	-
5 and table 1(Refractive index)	-	500	-
5 and table 1(Biuret)	-	750	-
5 and table 1(Aldehydes)	-	500	-
5 and table 1(Insoluble matter)	-	850	-
5 and table 1(Phosphate (PO4))	-	750	-
5 and table 1(Aluminium)	-	85	-
5 and table 1(Calcium)	-	85	-
5 and table 1(Chromium)	-	85	-
5 and table 1(Copper)	-	85	-
5 and table 1(Iron)	-	85	-
5 and table 1(Potassium)	-	85	-
5 and table 1(Magnesium)	-	85	-
5 and table 1(Sodium)	-	85	-
5 and table 1(Nickel)	-	85	-
5 and table 1(Zinc)	-	85	-

07 Apr, 2028

-
-

11336

National Test House (NR) - NTH, Ghaziabad

8101304

IS 8978 (1992)

Specification for electric instantaneous water heaters (Second Revision)

15000 View breakup
For BIS samples: BIS approved Testng charges. For Others: Rs.15000 (Inclusive of safety testing charges as per IS 302-2-35 @ Rs.5000/-)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.7 of IS 302-2-35:2017(Marking)	-	100	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.6 of IS 302-2-35:2017(Classification)	-	100	-
Cl.6 of IS 302-2-35:2017(Classification)	-	0	-
Cl.8 of IS 302-2-35:2017(Protection Against Access To Live Parts)	-	1000	-
Cl.10 of IS 302-2- 35:2011(Power Input & Current )	-	1000	-
Cl.11 of 302-2-35:2017(Heating)	-	1000	-
Cl.11 of 302-2-35:2017(Heating)	-	0	-
Cl.11 of 302-2-35:2017(Heating)	-	0	-
Cl.11 of 302-2-35:2017(Heating)	-	0	-
Cl.13 of IS 302-2-35:2017(Leakage Current & Electrical Strength at Operating Temperature )	-	500	-
Cl.13 of IS 302-2-35:2017(Leakage Current & Electrical Strength at Operating Temperature )	-	0	-
Cl.14 of IS 302-2-35:2017(Transient Over Voltages )	-	500	-
Cl.15 of IS 302-2-35-2011(Moisture Resistance )	-	100	-
Cl.16 of IS 302-2-35:2011(Leakage Current and Electric Strength)	-	0	-
Cl.16 of IS 302-2-35:2011(Leakage Current and Electric Strength)	-	0	-
Cl.17 IS 302-2-35:2017(Overload Protection of Transformers & Associated circuits )	-	100	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation)	-	100	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation)	-	0	-
Cl.20 of IS 302-2-35-2011(Stability & Mechanical Hazards )	-	100	-
Cl.21.1 of IS 302-2-35-2011(Mechanical strength)	-	500	-
Cl. 21.2 of IS 302-1:2008(Mechanical strength)	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	400	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	0	-
Cl.24 of IS 302-2-35:2017(Component )	-	500	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	300	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	100	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	0	-
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	500	-
Cl.28 of IS 302-2-35:2017(Screws and Connections )	-	300	-
Cl.29 of IS 302-2-35:2017(Clearances, Creepage Distances and Solid Insulation)	-	500	-
Cl.29 of IS 302-2-35:2017(Clearances, Creepage Distances and Solid Insulation)	-	0	-
Cl.29 of IS 302-2-35:2017(Clearances, Creepage Distances and Solid Insulation)	-	0	-
Cl.30 of IS 302-2-35: 2011(Resistance to Heat and Fire)	-	500	-
Cl.30.1 of IS 302-1:2008(Resistance to Heat and Fire)	-	0	-
Cl.31 of IS 302-2-35: 2011(Resistance to Rusting )	-	500	-
Cl.30.2 of IS 302-1:2008(Resistance to Heat and Fire)	-	0	-
Cl.29.2 of IS 302-2-35:2017(Clearances, Creepage Distances and Solid Insulation : Creepage distance )	-	0	-
Cl.29.1 of IS 302-2-35:2017(Clearances, Creepage Distances and Solid Insulation : Clearance distance )	-	0	-
Cl.28 of IS 302-2-35:2017(Screws and Connections )	-	0	-
Cl.27.5 of IS 302-2-35:2017(Provision for Earthing : ECR )	-	0	-
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	0	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	0	-
Cl.25.18 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25.15 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Cord grip test - displacement )	-	0	-
Cl.25.15 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Cord grip test )	-	0	-
Cl.25.12 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Moulding of supply cord )	-	0	-
Cl.25.10 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Colour of Earthing conductor )	-	0	-
Cl.25.8 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Resistance of supply cord )	-	0	-
Cl.25.5 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Type of attachment )	-	0	-
Cl.25.1 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : connection to the supply mains)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.24 of IS 302-2-35:2017(Component )	-	500	-
Cl.23 of IS 302-2-35:2017(Internal Wiring ; Colour of earthing conductor)	-	0	-
Cl.22.110 of IS 302-2-35:2017(Construction : Provision for fixing to wall )	-	500	-
Cl.22.109 of IS 302-2-35:2017(Construction : Operation of presure switch of open outlet water heater )	-	0	-
Cl.22.108 of IS 302-2-35:2017(Construction : Temperature of outlet water intended to supply for showring )	-	0	-
Cl.22.107 of IS 302-2-35:2017(Construction : Temperature of outlet )	-	0	-
Cl.22.106 of IS 302-2-35:2017(Construction : Operation of thermal cut out for closed water heater )	-	0	-
Cl.22.104 of IS 302-2-35:2017(Construction : Pressure in open outlet water heaters )	-	0	-
Cl.22.103 of IS 302-2-35:2017(Construction : Pressure relief device operation for closed water heater )	-	0	-
Cl.22.102 of IS 302-2-35:2017(Construction : excessive temperature of outlet )	-	0	-
Cl.22.101 of IS 302-2-35:2017(Construction : Rated pressure of closed water heater )	-	0	-
Cl.22.47 of IS 302-2-35:2017(Construction : Water pressure test )	-	0	-
Cl.22.44 of IS 302-1:2008(Construction : Shape and decoration )	-	0	-
Cl.22.34, Cl 22.35 of IS 302-1:2008(Construction : Shaft of operating Knobs )	-	0	-
Cl.22.33 of IS 302-1:2008(Construction : Direct contact of liquids )	-	0	-
Cl 22.26 ,Cl.22.28, Cl 22.29, Cl 22.30 , Cl 22.31, Cl 22.32 of IS 302-1:2008(Construction : Supplymentry/ double / reinforced insulation for Class II/ Class III appliance )	-	0	-
Cl.22.18 of IS 302-1:2008(Construction : Resistance to corrosion )	-	0	-
Cl.22.17 of IS 302-1:2008(Construction : Spacers )	-	0	-
Cl.22.14 of IS 302-1:2008(Construction : Ragged or sharp edges )	-	0	-
Cl.22.12 of IS 302-1:2008(Construction : Fixing of Handle, knob, grips, levers and similar parts )	-	0	-
Cl.22.11 of IS 302-1:2008(Construction : Fixing of non detachable parts )	-	0	-
Cl.22.7 of IS 302-1:2008(Construction : safeguards against the risk of excessive pressure. )	-	0	-
Cl.22.6 of IS 302-2-35:2017(Construction : size of drain hole )	-	0	-
Cl.22.6 of IS 302-1:2008(Construction : effect of water on 3 insulation )	-	0	-
Cl.22.2 of IS 302-1:2008(Construction : connection to supply mains )	-	0	-
Cl.22.1 of IS 302-1:2008(Construction : IP test )	-	0	-
Cl. 21.2 of IS 302-1:2008(Mechanical strength : prevent penetration by sharp implements. )	-	500	-
Cl.21.1 of IS 302-1:2008(Mechanical strength : Rough handling in normal use)	-	0	-
Cl.20 of IS 302-2-35:2017(Stability & Mechanical Hazards )	-	100	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation : effect on container)	-	100	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation : High voltage)	-	0	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation : Temperature rise of insulation of supply cord)	-	0	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation : Temperature rise of test corner)	-	0	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation : Emission of flames, molten metal ,or poisonous or ignitable gas)	-	0	-
Cl.16 of IS 302-2-35:2017(Leakage Current and Electric Strength (After Humidity))	-	1000	-
Cl.16 of IS 302-2-35:2017(Leakage Current and Electric Strength (After Humidity))	-	0	-
Cl.15 of IS 302-2-35:2017(Moisture Resistance )	-	100	-
Cl.14 of IS 302-2-35:2017(Transient Over Voltages )	-	100	-
Cl.13 of IS 302-2-35:2017(Leakage Current & 3 Strength at Operating Temperature : High voltage )	-	0	-
Cl.11 of 302-2-35:2017(Heating : room temperature)	-	100	-
Cl.11 of 302-2-35:2017(Heating : Insulation of supply cord)	-	0	-
Cl.11 of 302-2-35:2017(Heating : Temperature rise of test corner)	-	0	-
Cl.10 of IS 302-2- 35:2017(Power Input & Current )	-	1000	-
Cl.8 of IS 302-2-35:2017(Protection Against Access To Live Parts)	-	900	-
Cl.7.102 of IS 302-2-35:2017(Marking : Standard mark)	-	100	-
Cl.7.101 of IS 302-2-35:2017(Marking : Woter inlet and outlet idetification)	-	0	-
Cl.7.15 of IS 302-1:2008(Marking : Position of marking)	-	0	-
Cl.7.14 of IS 302-1:2008(Marking ; Legibility and durability)	-	0	-
Cl.7.13 of IS 302-1:2008(Marking : Language)	-	0	-
Cl.7.10 & 7.11 of IS 302-1:2008(Marking : Indication for direction of control)	-	0	-
Cl.7.8 of IS 302-1:2008(Marking : Terminal for connection )	-	0	-
Cl.7.6 of IS 302-1:2008(Marking : Symbols)	-	0	-
Cl.7.1 of IS 302-2-35:2017(Marking : rated pressure)	-	0	-
Cl.7.1 of IS 302-1:2008(Marking : Country of manufacture)	-	0	-
Cl.7.1 of IS 302-1:2008(Marking : IP number )	-	0	-
Cl.7.1 of IS 302-1:2008(Marking : Symbol for class II)	-	0	-
Cl.7.1 of IS 302-1:2008(Marking : Molel or type)	-	0	-
Cl.7.1 of IS 302-1:2008(Marking : Manufacture identification)	-	0	-
Cl.7.1 of IS 302-1:2008(Marking : Rated power input)	-	0	-
Cl.7.1 of IS 302-1:2008(Marking : Nature of supply)	-	0	-
Cl.7.1 of IS 302-1:2008(Marking : Rated Voltage)	-	0	-

26 Oct, 2025

-
-

11337

BIS, Central Laboratory (CL)

None

IS 4566 (2020)

Specification For Methylene Chloride ( Dichloromethane ) — Technical ( Second Revision

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.4.1 (Description)	-
Cl.4.2, Table-1(i) (Relative density at 27/27°C)	-
Cl.4.2, Table-1(ii) (Distillation range at a pressure of 1 bar (optional for grade 1))	-
Cl.4.2, Table-1(iii) (Residue on evapouration)	-
Cl.4.2, Table-1(v) (Acidity (as Hcl))	-
Cl.4.2, Table-1(vi) (Free Chlorine)	-
Cl.4.2, Table-1(vii) (Aldehydes)	-
Cl.4.2, Table-1(viii) (Iron (as Fe))	-
Cl.4.2, Table-1(ix) (Heavy metals (as Pb))	-
Cl.4.2, Table-1(x) (Resistance to potassium permanganate)	-
Cl.4.2, Table-1(xi) (Nesslers reagent)	-
Cl.4.2, Table-1(xii) (Resistance to sulphuric acid)	-

-
-

11338

BIS, Central Laboratory (CL)

None

IS 5149 (2020)

Specification for Maleic Anhydride, Technical ( Second Revision )

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.2.1 (Description)	-
Cl.2.2, Table-1(i) (Crystallizing point)	-
Cl.2.2, Table-1(ii) (Colour of the molten material)	-
Cl.2.2, Table-1(iii) (Maleic acid content)	-
Cl.2.2, Table-1(iv) (Maleic anhydride content)	-
Cl.2.2, Table-1(v) (Ash)	-
Cl.2.2, Table-1(vi) (Iron content (as Fe))	-
Cl.2.1 (Description)	-
Cl.2.2, Table-1(i) (Crystallizing point)	-
Cl.2.2, Table-1(ii) (Colour of the molten material)	-
Cl.2.2, Table-1(iii) (Maleic acid content)	-
Cl.2.2, Table-1(iv) (Maleic anhydride content)	-
Cl.2.2, Table-1(v) (Ash)	-
Cl.2.2, Table-1(vi) (Iron content (as Fe))	-
Cl.2.1 (Description)	-
Cl.2.2, Table-1(i) (Crystallizing point)	-
Cl.2.2, Table-1(ii) (Colour of the molten material)	-
Cl.2.2, Table-1(iii) (Maleic acid content)	-
Cl.2.2, Table-1(iv) (Maleic anhydride content)	-
Cl.2.2, Table-1(v) (Ash)	-
Cl.2.2, Table-1(vi) (Iron content (as Fe))	-
Cl.2.1 (Description)	-
Cl.2.2, Table-1(i) (Crystallizing point)	-
Cl.2.2, Table-1(ii) (Colour of the molten material)	-
Cl.2.2, Table-1(iii) (Maleic acid content)	-
Cl.2.2, Table-1(iv) (Maleic anhydride content)	-
Cl.2.2, Table-1(v) (Ash)	-
Cl.2.2, Table-1(vi) (Iron content (as Fe))	-
Cl.2.1 (Description)	-
Cl.2.2, Table-1(i) (Crystallizing point)	-
Cl.2.2, Table-1(ii) (Colour of the molten material)	-
Cl.2.2, Table-1(iii) (Maleic acid content)	-
Cl.2.2, Table-1(iv) (Maleic anhydride content)	-
Cl.2.2, Table-1(v) (Ash)	-

-
Test facility is complete for this IS

11339

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 277 (2018)

Galvanized steel strips and sheets (Plain And Corrugated) - Specification (Seventh Revision)

5210 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(phosphorus)	-	50	-
5.1(copper)	-	50	-
5.1(nitrogen)	-	700	-
5.1(aluminium)	-	50	-
5.1(manganese)	-	50	-
5.1(sulphur)	-	50	-
5.1(carbon)	-	50	-
5.1(Titanium)	-	50	-
5.1(micro alloy)	-	250	-
7.4(Mass of Coating: Single Spot Test)	-	350	-
7.4(Mass of Coating: Triple Spot Test)	-	350	-
7.1 & 10.2(Mass of Coating: Single Spot Test)	-	350	-
7.1 & 10.2(Mass of Coating: Triple Spot Test)	-	350	-
Cl. 17(Marking )	-	150	-
Cl. 14 & Cl. 15(Pitch of corrugation (average of 4))	-	50	-
Cl. 14 & Cl. 15(Depth of corrugation (average of 4))	-	50	-
Cl. 14 & Cl. 15 (Cl. 14 & Cl 15 (Number of Corrugation))	-	50	-
Cl. 14 & Cl. 15 (Cl. 14 & Cl 15 (Difference between Diagonal))	-	50	-
Cl. 14 & Cl. 15 (Cl. 14 & Cl. 15 (Thickness))	-	50	-
Cl. 14 (Cl. 14 & Cl 15 (Width))	-	50	-
Cl. 14 (Cl. 14 & Cl 15 (Length))	-	50	-
Cl.12(Freedom from defects)	-	50	-
Cl. 8.1 (Cl. 8.1 (Percentage Elongation ))	-	100	-
Cl. 8.1 (Cl. 8.1 (Yield Stress))	-	500	-
Cl. 8.1 (Cl. 8.1 (Tensile Strength))	-	500	-
cl 5.1, T-1, Note-6, For reinforced steel(P)	-	50	-
cl 5.1, T-1, Note-5, For Microalloying elements(Nb+V+Ti+B)	-	250	-
cl 5.1, T-1, Note-5, For Microalloying elements(B)	-	250	-
cl 5.1, T-1, Note-5, For Microalloying elements(Ti)	-	250	-
cl 5.1, T-1, Note-5, For Microalloying elements(V)	-	250	-
cl 5.1, T-1, Note-5, For Microalloying elements(Nb)	-	250	-
cl 5.1, T-1, Note-4, For Cu bearing quality(Cu)	-	50	-
cl 5.1, T-1, Note-2, When Al-Si killed(Si)	-	50	-
cl 5.1, T-1, Note-2, When Al-Si killed(Al)	-	50	-
cl 5.1, T-1, Note-3(N2)	-	700	-
cl 5.1, T-1, designation For GP 550(P)	-	50	-
cl 5.1, T-1, designation For GP 550(S)	-	50	-
cl 5.1, T-1, designation For GP 550(Mn)	-	50	-
cl 5.1, T-1, designation For GP 550(C)	-	50	-
cl 5.1, T-1, Note-3(N2)	-	700	-
cl 5.1, T-1, designation For GP 450(P)	-	50	-
cl 5.1, T-1, designation For GP 450(S)	-	50	-
cl 5.1, T-1, designation For GP 450(Mn)	-	50	-
cl 5.1, T-1, designation For GP 450(C)	-	50	-
cl 5.1, T-1, designation For GP 350 class-2(P)	-	50	-
cl 5.1, T-1, designation For GP 350 class-2(S)	-	50	-
cl 5.1, T-1, designation For GP 350 class-2(Mn)	-	50	-
cl 5.1, T-1, designation For GP 350 class-2(C)	-	50	-
cl 5.1, T-1, designation For GP 300(P)	-	50	-
cl 5.1, T-1, designation For GP 350 class-1(P)	-	50	-
cl 5.1, T-1, designation For GP 350 class-1(S)	-	50	-
cl 5.1, T-1, designation For GP 350 class-1(Mn)	-	50	-
cl 5.1, T-1, designation For GP 350 class-1(C)	-	50	-
cl 5.1, T-1, designation For GP 300(S)	-	50	-
cl 5.1, T-1, designation For GP 300(Mn)	-	50	-
cl 5.1, T-1, designation For GP 300(C)	-	50	-
cl 5.1, T-1, designation For GP275(P)	-	50	-
cl 5.1, T-1, designation For GP275(S)	-	50	-
cl 5.1, T-1, designation For GP275(Mn)	-	50	-
cl 5.1, T-1, designation For GP275(C)	-	50	-
cl 5.1, T-1, designation For GP250(P)	-	50	-
cl 5.1, T-1, designation For GP250(S)	-	50	-
cl 5.1, T-1, designation For GP230(Mn)	-	50	-
cl 5.1, T-1, designation For GP230(C)	-	50	-
cl 5.1, T-1, designation For GPIF(P)	-	50	-
cl 5.1, T-1, designation For GPIF(S)	-	50	-
cl 5.1, T-1, designation For GPIF(Mn)	-	50	-
cl 5.1, T-1, designation For GPIF(C)	-	50	-
cl 5.1, T-1, designation For GPED(P)	-	50	-
cl 5.1, T-1, designation For GPED(S)	-	50	-
cl 5.1, T-1, designation For GPED(Mn)	-	50	-
cl 5.1, T-1, designation For GPED(C)	-	50	-
cl 5.1, T-1, designation For GPD(P)	-	50	-
cl 5.1, T-1, designation For GPD(S)	-	50	-
cl 5.1, T-1, designation For GPD(Mn)	-	50	-
cl 5.1, T-1, designation For GPD(C)	-	50	-
cl 5.1, T-1, designation For GPL(P)	-	50	-
cl 5.1, T-1, designation For GPL(S)	-	50	-
cl 5.1, T-1, designation For GPL(Mn)	-	50	-
cl 5.1, T-1, designation For GPL(C)	-	50	-
cl 5.1, T-1, designation For GC(P)	-	50	-
cl 5.1, T-1, designation For GC(S)	-	50	-
cl 5.1, T-1, designation For GC(Mn)	-	50	-
cl 5.1, T-1, designation For GC(C)	-	50	-
cl 5.1, T-1, designation For GPH (P)	-	50	-
cl 5.1, T-1, designation For GPH (S)	-	50	-
cl 5.1, T-1, designation For GPH (Mn)	-	50	-
cl 5.1, T-1, designation For GPH (C)	-	50	-
cl 5.1, T-1, designation For GP (P)	-	50	-
cl 5.1, T-1, designation For GP (S)	-	50	-
cl 5.1, T-1, designation For GP (Mn)	-	50	-
cl 5.1, T-1, designation For GP (C)	-	50	-
Cl.15.1.3.1(Overall width after corrugation)	-	100	-
Cl.15.1.3.1(Overall width before corrugation)	-	100	-
Cl. 9(Surface roughness)	-	500	-
Cl 14(Length, Width & Thickness)	-	100	-
Cl 13(Weight)	-	50	-
Cl 12(Workmanship)	-	150	-
Cl 10(Galvanising Test)	-	350	-
Cl 8.2(Press)	-	500	-
Cl 8.1(UTM)	-	500	-
Cl.15.1.3.1(Overall width after corrugation)	-	50	-
Cl.15.1.3.1(Overall width before corrugation)	-	50	-
Cl. 9(Surface roughness)	-	500	-
Cl 14(Length, Width & Thickness)	-	100	-
Cl 13(Weight)	-	50	-
Cl 12(Workmanship)	-	150	-
Cl 10(Galvanising Test)	-	350	-
Cl 8.2(Press)	-	500	-
Cl 8.1(UTM)	-	500	-
Cl.15.1.3.1(Overall width after corrugation)	-	100	-
Cl.15.1.3.1(Overall width before corrugation)	-	100	-
Cl. 9(Surface roughness)	-	500	-
Cl 14(Length, Width & Thickness)	-	100	-
Cl 13(Weight)	-	50	-
Cl 12(Workmanship)	-	150	-
Cl 10(Galvanising Test)	-	350	-
Cl 8.2(Press)	-	500	-
Cl 8.1(UTM)	-	500	-

31 Dec, 2026

-
Included w.e.f. 07.11.2023

11340

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 8329 (2000)

Centrifugally cast (Spun) ductile iron pressure pipes for water, gas and sewage - Specification (Third Revision)

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 10(Hardness & Tensile Test)	-	3000	10% DISCOUNT TO BIS
Cl 11(Hydrostatic Test)	-	3500	10% DISCOUNT TO BIS
Cl 13(Length, Diameter, Wall Thickness & Ovality)	-	2500	10% DISCOUNT TO BIS
Cl 10(Hardness & Tensile Test)	-	3000	-
Cl 11(Hydrostatic Test)	-	3500	-
Cl 13(Length, Diameter, Wall Thickness & Ovality)	-	2500	-
Cl 10(Hardness & Tensile Test)	-	3000	-

31 Dec, 2026

-
Included w.e.f. 07.11.2023

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number