| 11281 |
BIS, Northern Regional Laboratory (NRL)
| None
| IS 9537 : Part 3 (1983) |
Specification for conduits for electrical installations: Part 3 rigid plain conduits of insulating meterials |
- |
Rs. 3300.00/, Rs. 2850.00/ View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6.1 (Marking) |
- |
|
|
|
| 6.2 (Durability of Marking as per 6.4 of IS: 9537 (Part 1)-1980) |
- |
|
|
|
| 6.3 (Standard Mark on Conduit) |
- |
|
|
|
| 7.1.1 (Maximum and minimum outside diameter of socket) |
- |
|
|
|
| 7.1.1 Table-2 (Length of Socket end) |
- |
|
|
|
| 7.1.1 (Maximum and minimum outside diameter of socket) |
- |
|
|
|
| 7.1.1 Table-2 (Length of Socket end) |
- |
|
|
|
| 7.1.2 (Maximum and minimum outside diameter of conduit) |
- |
|
|
|
| 7.2 (Minimum inside diameter of conduit) |
- |
|
|
|
| 7.3 (Length of conduit) |
- |
|
|
|
| 7.4 (Unifomity of The wall Thickness) |
- |
|
|
|
| 8.1 (Construction as per clause 8 of IS: 9537 (Part 1)-1980) |
- |
|
|
|
| 9.2 (Bending Test i) At Room Temp ii) At Low Temp (-5 ±2°C)) |
- |
|
|
|
| 9.3 (Compression Test as per caluse 9.3 of IS: 9537 (Part 1)-1980) |
- |
|
|
|
| 9.4 (Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980) |
- |
|
|
|
| 9.5 (Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980) |
- |
|
|
|
| 9.3 (Compression Test as per caluse 9.3 of IS: 9537 (Part 1)-1980) |
- |
|
|
|
| 9.5 (Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980) |
- |
|
|
|
| 10 (Resistance to Heat -Ball presure test) |
- |
|
|
|
| 11 (Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980) |
- |
|
|
|
| 12 (Electrical Characteristics-Test for electric strength as per clause 12.1.1 of IS: 9537 (Part 1)-1980) |
- |
|
|
|
| 12 (Electrical Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980) |
- |
|
|
|
|
- |
-
"Test facility is complete
" |
| 11282 |
BIS, Bengaluru Branch Laboratory (BNBL)
| None
| IS 5312 : Part 1 (2004) |
Swing Check Type Reflux (Non-Return] Valves for Water Works Purposes - Part 1 : Single-Door Pattern |
- |
Rs 5700/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1.1 (Actual bore) |
- |
|
|
|
| 6.2 (Manufacture Dimensions Table 2 ) |
- |
|
|
|
| 6.2 (Manufacture Dimensions Table 2 ) |
- |
|
|
|
| 6.4 (Manufacture ) |
- |
|
|
|
| 6.5 (Manufacture ) |
- |
|
|
|
| 6.6 (Manufacture ) |
- |
|
|
|
| 6.7 (Manufacture ) |
- |
|
|
|
| 6.8 (Manufacture ) |
- |
|
|
|
| 6.8.1 (Manufacture ) |
- |
|
|
|
| 6.9 (Manufacture ) |
- |
|
|
|
| 6.9 (Manufacture ) |
- |
|
|
|
| 6.9 (Manufacture ) |
- |
|
|
|
| 6.9 (Manufacture ) |
- |
|
|
|
| 6.10 (Manufacture ) |
- |
|
|
|
| 6.10.1 (Manufacture ) |
- |
|
|
|
| 6.12 (Door Faces) |
- |
|
|
|
| 6.13 (By-pass arrangements) |
- |
|
|
|
| 6.13.1 (By-pass arrangements) |
- |
|
|
|
| 6.13.1 (By-pass arrangements) |
- |
|
|
|
| 7.1 (Coating) |
- |
|
|
|
| 8.2 (Hydrostatic Body Test ) |
- |
|
|
|
| 8.3 (Hydrostatic Seat Test) |
- |
|
|
|
|
- |
-
Sizes upto 300 mm only. Except material testing. |
| 11283 |
BIS, Bengaluru Branch Laboratory (BNBL)
| None
| IS 459 (1992) |
Corrugated and semi - Corrugated asbestos cement sheets - Specification (Third Revision) |
- |
Rs.1275.00 View breakup
Hence, testing charges (rounded to nearest Rs. 50.00) for the product is : 6000.00
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5, Table 1 (Dimensions & Tolerances - Type of Sheet - cl. 5) |
- |
|
|
|
| 5, Table 1, Figure 1,2 (Dimensions & Tolerances - Depth of Corrugation, D - Cl. 5) |
- |
|
|
|
| 5, Table 1, Figure 1,2 (Dimensions & Tolerances - Pitch of Corrugation, P - Cl. 5) |
- |
|
|
|
| 5, Table 1, Figure 1,2 (Dimensions & Tolerances - Overall width, B - Cl. 5) |
- |
|
|
|
| 5, Table 1, Figure 1,2 (Dimensions & Tolerances - Effective Width, C - Cl. 5) |
- |
|
|
|
| 5, Table 1, Figure 1,2 (Dimensions & Tolerances - Nominal Thickness, T - Cl. 5) |
- |
|
|
|
| 5, Table 1, Figure 1,2 (Dimensions & Tolerances - Length of Sheet, A - Cl. 5) |
- |
|
|
|
| 7 (General Appearance and Finish - Cl. 7.1) |
- |
|
|
|
| 7 (General Appearance and Finish - Cl. 7.2) |
- |
|
|
|
|
- |
-
Except Load Bearing Test |
| 11284 |
BIS, Bengaluru Branch Laboratory (BNBL)
| None
| IS 3575 (1993) |
Bitumen drums - Specification (Third Revision) |
- |
Please see remarks. View breakup
Rs. 1800/- and Material testing charges as per relevant referred Iss
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1 (Dimensions Drums (Figure 1)) |
- |
|
|
|
| 4.1 (Dimensions Drums (Figure 1)) |
- |
|
|
|
| 4.1 (Dimensions Drums (Figure 1)) |
- |
|
|
|
| 4.1 (Dimensions Closure (Figure 2)) |
- |
|
|
|
| 5.1 (Body and ends) |
- |
|
|
|
| 5.2 (Closures) |
- |
|
|
|
| 6.1 (Construction) |
- |
|
|
|
| 6.2 (Construction) |
- |
|
|
|
| 6.3 (Construction) |
- |
|
|
|
| 6.4 (Construction) |
- |
|
|
|
| 6.5 (Closure) |
- |
|
|
|
| 7.1 (Finish) |
- |
|
|
|
| 7.2 (Finish) |
- |
|
|
|
| 8 (Air Pressure Test) |
- |
|
|
|
| 4.1 (Dimensions Drums (Figure 1)) |
- |
|
|
|
| 4.1 (Dimensions Drums (Figure 1)) |
- |
|
|
|
| 4.1 (Dimensions Closure (Figure 2)) |
- |
|
|
|
| 4.1 (Dimensions Closure (Figure 2)) |
- |
|
|
|
| 4.1 (Dimensions Closure (Figure 2)) |
- |
|
|
|
|
- |
-
- |
| 11285 |
BIS, Bengaluru Branch Laboratory (BNBL)
| None
| IS 205 (1992) |
Non - Ferrous metal butt specification (Fourth Revision) |
- |
1500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3 (TYPES) |
- |
|
|
|
| 5.1- Table 2,3,4,5 & Fig-1 & 2 (Dimensions- Type of Hinge 1.Length 2.Breadth 3.Butt Dia 4.Pin Dia 5.Thickness of Flap) |
- |
|
|
|
| 5.1- Table 2,3,4,5 & Fig-1 & 2 (Dimensions- 1. Holes for Screw Desination 2. No. of screw Holes) |
- |
|
|
|
| 5.2 ,Table 6 (Tolerances-Tolerances on dimensions of hinges ) |
- |
|
|
|
| 6.1 (Manufacture- General) |
- |
|
|
|
| 6.2- Table 2,3,4,5 (Kunckles) |
- |
|
|
|
| 6.3 (Screw Holes) |
- |
|
|
|
| 6.3.1- Table 2,3,4,5 & Fig-1 & 2 (Screw Holes) |
- |
|
|
|
| 6.3.2- Table 2,3,4,5 (Number of Holes) |
- |
|
|
|
| 6.3.3 Fig-1 (Position of Holes) |
- |
|
|
|
| 8.1 (Packing - Each hinge shall be packed in card board boxes or in any other approved packing. The number of hinges in a package shall be as under) |
- |
|
|
|
| 8.2 (Packing -Each Package shall bear the following Particulars) |
- |
|
|
|
|
- |
-
Excluding Material Testing |
| 11286 |
BIS, Bengaluru Branch Laboratory (BNBL)
| None
| IS 204 : Part 2 (1992) |
Tower bolts - Specification: Part 2 non - Ferrous metals (Fifth Revision) |
- |
Rs.2100.00. View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.1 (General) |
- |
|
|
|
| 5.2.1 Table 1 (Particulars-Barrel Tower Bolts) |
- |
|
|
|
| 5.2.2 Table 2 (Particulars-Skeleton Tower Bolts) |
- |
|
|
|
| 6.1- Table 1 (Dimension of Barrel tower bolts-1.Size 2.Length of Bolt or Barrel-(A or B) 4.Width of Barrel-C 5.Dia of Bolt-D 6.Length of Socket-E 7.Thickness of Metal of Barrel (Brass or Zink Alloy/Aluminium alloy/Sheet Brass)-F 8.Dia of bore of barrel or socket- G ) |
- |
|
|
|
| 6.1- Table 1 (Dimension of barrel tower bolts-Minimum No. of equally Spaced holes in Barrel & Socket for wooden screw no 6) |
- |
|
|
|
| 6.2- Table 2 (Dimension of Skeleton Tower Bolts 1.Size 2.Length of Bolt -A 3.Length of Bolt Plate -B 4.Width of Bolt Plate or Staple-C 5.Dia of Bolt-D 6.Length of Staple-E 7.Thickness of Plate or Socket (Brass /Aluminium alloy or Zink Alloy)-F 8.Dia of bore of Plate or Staple-G 9.Dia of shank of Knob ) |
- |
|
|
|
| 6.2- Table 2 (Dimension of Skeleton Tower Bolts- Nos of Staples) |
- |
|
|
|
| 6.2- Table 2 (Dimension of Skeleton Tower Bolts-Minimum No. of Screw holes for wood screw no 4) |
- |
|
|
|
| 6.2- Table 3 (PACKING) |
- |
|
|
|
|
- |
-
Excluding Material Testing |
| 11287 |
BIS, Bengaluru Branch Laboratory (BNBL)
| None
| IS 204 : Part 1 (1991) |
Tower bolts - Specification: Part 1 ferrous metals (Fifth Revision) |
- |
Rs.2100.00. View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.1 (General) |
- |
|
|
|
| 5.2.1 Table 1 (Particulars-Barrel Tower Bolts) |
- |
|
|
|
| 5.2.2 Table 2 (Particulars-Sami Barrel Tower Bolts) |
- |
|
|
|
| 5.2.3 Table 3 (Particulars-Riveted or Spot Welded Tower Bolts) |
- |
|
|
|
| 5.2.4 Table 4 (Particulars-Skeleton Tower Bolts) |
- |
|
|
|
| 6.1- Table 1 (Dimension of Barrel tower bolts-1.Size 2.Length of Bolt-A 3.Length of Barrel-B 4.Width of Barrel-C 5.Dia of Bolt-D 6.Length of Socket-E 7.Thickness of mild steel sheet for barrel-F 8.Dia of bore of barrel or socket- G ) |
- |
|
|
|
| 6.1- Table 1 (Dimension of Barrel tower bolts-Minimum No. of equally Spaced Screw holes in Barrel and Socket for wood screw no 6) |
- |
|
|
|
| 6.2- Table 2 (Dimension of Sami Barrel Tower Bolts 1.Size 2.Length of Bolt-A 3.Length of Bolt Plate-B 4.Width of Bolt Plate-C 5.Dia of Bolt-D 6.Length of Socket-E 7.Thickness of Bolt Plate or Socket-F 8.Dia of bore of Bolt Plate or socket G ) |
- |
|
|
|
| 6.2- Table 2 (Dimension of Sami Barrel Tower Bolts-Minimum No. of equally Spaced Screw holes in Bolt Plate and Socket for wood screw no 6) |
- |
|
|
|
| 6.3- Table 3 (Dimension of Riveted or Spot Welded Tower Bolts- 1.Size 2.Length of Bolt-A 3.Length of Bolt Plate-B 4.Width of Bolt Plate-C 5.Dia of Bolt-D 6.Length of Socket-E 7. Length of Strap-E" 8.Thickness of Back Plate -F 9.Thickness of Socket or Upper Plate and Strap- F" 10.Dia of bore of Bolt Plate or socket- G 11. Length of Alternative Socket-H ) |
- |
|
|
|
| 6.3- Table 3 (Dimension of Riveted or Spot Welded Tower Bolts-Minimum No. of equally Spaced Screw holes in Bolt Plate and Socket for wood screw no 6) |
- |
|
|
|
| 6.4- Table 4 (Dimension of Skeleton Tower Bolts 1.Size 2.Length of Bolt-A 3.Length of Bolt Plate-B 4.Width of Bolt Plate-C 5.Dia of Bolt-D 6.Length of Staple-E 7.Thickness of Plate or Staple -F 8.Dia of bore of Plate or Staple-G 9.Dia of shank of Knob-J) |
- |
|
|
|
| 6.4- Table 4 (Dimension of Skeleton Tower Bolts- Nos of Staples) |
- |
|
|
|
| 6.4- Table 4 (Dimension of Skeleton Tower Bolts-Minimum No. of Screw holes for wood screw no 6) |
- |
|
|
|
| 8.1 (MARKING- .) |
- |
|
|
|
| 8.1.1, (MARKING- ) |
- |
|
|
|
| 9 (PACKING) |
- |
|
|
|
|
- |
-
Excluding Material Testing |
| 11288 |
BIS, Central Laboratory (CL)
| None
| IS 7466 (1994) |
Rubber gaskets for pressure cookers - Specifications (First Revison) |
- |
Rs.9480/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.2 (Workmanship and Finish ) |
- |
|
|
|
| 3.4-Table 1(i) (Requirements of Rubber Used for Gaskets-Hardness IRHD) |
- |
|
|
|
| 3.4-Table 1(ii) (Requirements of Rubber Used for Gaskets-Tensile strength,) |
- |
|
|
|
| 3.4-Table 1(iii) (Requirements of Rubber Used for Gaskets-Elongation at break) |
- |
|
|
|
| 3.4-Table 1(iv-a) (Requirements of Rubber Used for Gaskets-Hardness IRHD(After ageing 3 days in Aie-oven Change From Original Value)) |
- |
|
|
|
| 3.4-Table 1(iv-b) (Requirements of Rubber Used for Gaskets-Tensile strength(After ageing 3 days in Aie-oven Change From Original Value)) |
- |
|
|
|
| 3.4-Table 1(iv-c) (Requirements of Rubber Used for Gaskets-Elongation at break(After ageing 3 days in Aie-oven Change From Original Value)) |
- |
|
|
|
| 3.4-Table 1(v-a) (Requirements of Rubber Used for Gaskets-Hardness IRHD(After ageing in an autoclave Change From Original Value)) |
- |
|
|
|
| 3.4-Table 1(v-b) (Requirements of Rubber Used for Gaskets-Tensile strength(After ageing in an autoclave Change From Original Value)) |
- |
|
|
|
| 3.4-Table 1(v-c) (Requirements of Rubber Used for Gaskets-Elongation at break(After ageing in an autoclave Change From Original Value)) |
- |
|
|
|
| 3.5-ANNEX C (PERFORMANCE TEST FOR PRESSURE COOKER ) |
- |
|
|
|
| 3.4-Table 1(vi) (Compression set) |
- |
|
|
|
|
- |
-
- |
| 11289 |
BIS, Bengaluru Branch Laboratory (BNBL)
| None
| IS 1783 : Part 2 (2014) |
Drums large, fixed ends - Specification: Part 2 grade B drums (Fourth Revision) |
- |
5550 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4 (Capacity) |
- |
|
|
|
| 5 (Dimensions (Type 1 C Drums Figure 1)) |
- |
|
|
|
| 5 (Dimensions (Type 1 C Drums Figure 1)) |
- |
|
|
|
| 5 (Dimensions (Type 1 C Drums Figure 1)) |
- |
|
|
|
| 5 (Dimensions (Type 1 C Drums Figure 1)) |
- |
|
|
|
| 5 (Dimensions (Type 1 C Drums Figure 1)) |
- |
|
|
|
| 5 (Dimensions (Type 1 C Drums Figure 1)) |
- |
|
|
|
| 5 (Dimensions (Type 1 C Drums Figure 1)) |
- |
|
|
|
| 5 (Dimensions (Type 1 C Drums Figure 1)) |
- |
|
|
|
| 5 (Dimensions (Type 1 D Drums Figure 1)) |
- |
|
|
|
| 5 (Dimensions (Type 1 D Drums Figure 1)) |
- |
|
|
|
| 5 (Dimensions (Type 1 D Drums Figure 1)) |
- |
|
|
|
| 5 (Dimensions (Type 1 D Drums Figure 1)) |
- |
|
|
|
| 5 (Dimensions (Type 1 D Drums Figure 1)) |
- |
|
|
|
| 5 (Dimensions (Type 1 D Drums Figure 1)) |
- |
|
|
|
| 5 (Dimensions (Type 1 C Drums Figure 2)) |
- |
|
|
|
| 5 (Dimensions (Type 1 C Drums Figure 2)) |
- |
|
|
|
| 5 (Dimensions (Type 1 C Drums Figure 2)) |
- |
|
|
|
| 5 (Dimensions (Type 1 C Drums Figure 2)) |
- |
|
|
|
| 5 (Dimensions (Type 1 C Drums Figure 2)) |
- |
|
|
|
| 5 (Dimensions (Type 1 C Drums Figure 2)) |
- |
|
|
|
| 5 (Dimensions (Type 1 C Drums Figure 2)) |
- |
|
|
|
| 5 (Dimensions (Type 1 D Drums Figure 2)) |
- |
|
|
|
| 5 (Dimensions (Type 1 D Drums Figure 2)) |
- |
|
|
|
| 5 (Dimensions (Type 1 D Drums Figure 2)) |
- |
|
|
|
| 5 (Dimensions (Type 1 D Drums Figure 2)) |
- |
|
|
|
| 5 (Dimensions (Type 1 D Drums Figure 2)) |
- |
|
|
|
| 5 (Dimensions (Type 1 D Drums Figure 2)) |
- |
|
|
|
| 5 (Dimensions (Type 1 D Drums Figure 2)) |
- |
|
|
|
| 5 (Dimensions (Type 1 D Drums Figure 2)) |
- |
|
|
|
| 7 (Construction) |
- |
|
|
|
| 7.2 (Construction) |
- |
|
|
|
| 7.3 (Construction) |
- |
|
|
|
| 7.4 (Construction) |
- |
|
|
|
| 7.5 (Construction) |
- |
|
|
|
| 7.7 (Construction) |
- |
|
|
|
| 8 (Finish ) |
- |
|
|
|
| 9.1 (Leakage at air pressure ) |
- |
|
|
|
| 9.2 (Drop Test) |
- |
|
|
|
| 9.3 (Hydraulic Pressure Test) |
- |
|
|
|
|
- |
-
- |
| 11290 |
BIS, Bengaluru Branch Laboratory (BNBL)
| None
| IS 1783 : Part 1 (2014) |
Drums large, fixed ends - Specification: Part 1 grade A drums (Fourth Revision) |
- |
Rs.4800/- and testing charges as per relevant referred View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4 (Capacity) |
- |
|
|
|
| 5 (Dimensions (Type 1 C Drums Figure 1)) |
- |
|
|
|
| 5 (Dimensions (Type 1 C Drums Figure 1)) |
- |
|
|
|
| 5 (Dimensions (Type 1 C Drums Figure 1)) |
- |
|
|
|
| 5 (Dimensions (Type 1 C Drums Figure 1)) |
- |
|
|
|
| 5 (Dimensions (Type 1 C Drums Figure 1)) |
- |
|
|
|
| 5 (Dimensions (Type 1 C Drums Figure 1)) |
- |
|
|
|
| 5 (Dimensions (Type 1 C Drums Figure 1)) |
- |
|
|
|
| 5 (Dimensions (Type 1 D Drums Figure 1)) |
- |
|
|
|
| 5 (Dimensions (Type 1 D Drums Figure 1)) |
- |
|
|
|
| 5 (Dimensions (Type 1 D Drums Figure 1)) |
- |
|
|
|
| 5 (Dimensions (Type 1 D Drums Figure 1)) |
- |
|
|
|
| 5 (Dimensions (Type 1 D Drums Figure 1)) |
- |
|
|
|
| 5 (Dimensions (Type 1 D Drums Figure 1)) |
- |
|
|
|
| 5 (Dimensions (Type 1 D Drums Figure 1)) |
- |
|
|
|
| 5 (Dimensions (Type 1 D Drums Figure 1)) |
- |
|
|
|
| 5 (Dimensions (Type 1 C Drums Figure 2)) |
- |
|
|
|
| 5 (Dimensions (Type 1 C Drums Figure 2)) |
- |
|
|
|
| 5 (Dimensions (Type 1 C Drums Figure 2)) |
- |
|
|
|
| 5 (Dimensions (Type 1 C Drums Figure 2)) |
- |
|
|
|
| 5 (Dimensions (Type 1 C Drums Figure 2)) |
- |
|
|
|
| 5 (Dimensions (Type 1 C Drums Figure 2)) |
- |
|
|
|
| 5 (Dimensions (Type 1 C Drums Figure 2)) |
- |
|
|
|
| 5 (Dimensions (Type 1 C Drums Figure 2)) |
- |
|
|
|
| 5 (Dimensions (Type 1 D Drums Figure 2)) |
- |
|
|
|
| 5 (Dimensions (Type 1 D Drums Figure 2)) |
- |
|
|
|
| 5 (Dimensions (Type 1 D Drums Figure 2)) |
- |
|
|
|
| 5 (Dimensions (Type 1 D Drums Figure 2)) |
- |
|
|
|
| 5 (Dimensions (Type 1 D Drums Figure 2)) |
- |
|
|
|
| 5 (Dimensions (Type 1 D Drums Figure 2)) |
- |
|
|
|
| 5 (Dimensions (Type 1 D Drums Figure 2)) |
- |
|
|
|
| 5 (Dimensions (Type 1 D Drums Figure 2)) |
- |
|
|
|
| 7.1 (Construction) |
- |
|
|
|
| 7.2 (Construction) |
- |
|
|
|
| 7.3 (Construction) |
- |
|
|
|
| 7.4 (Construction) |
- |
|
|
|
| 7.5 (Construction) |
- |
|
|
|
| 7.6 (Construction) |
- |
|
|
|
| 8 (Finish ) |
- |
|
|
|
| 9.1 (Leakage at air pressure ) |
- |
|
|
|
| 9.2 (Drop Test) |
- |
|
|
|
| 9.3 (Hydraulic Pressure Test) |
- |
|
|
|
|
- |
-
- |
| 11291 |
BIS, Bengaluru Branch Laboratory (BNBL)
| None
| IS 1660 (2009) |
Wrought aluminium utensils - Specification (First Revision) |
- |
Rs 6760/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.1 (The utensil shall be pressed or spun from one piece) |
- |
|
|
|
| 5.2 ( Body Thickness of the thinnest part of the finished utensil, mm Not declared ) |
- |
|
|
|
| 5.2 (Lid Thickness of the finished utensil, mm) |
- |
|
|
|
| 6.1 & Table 1 (ii) Shape of Utensil) |
- |
|
|
|
| 6.1 & Table 1 ( Nominal Size, mm) |
- |
|
|
|
| 6.1 & Table 1 (Inside dia, Φ D mm Not declared ) |
- |
|
|
|
| 6.1 ( Minimum sheet thickness for nominal size ) |
- |
|
|
|
| 7.1 (HANDLES ,When fitted shall be of aluminium, stainless steel or of other suitable fire resistance material These shall be fastened to the utensils by tightly drawn aluminium or stainless steel rivets, by welding, by screwing to cast bosses or by riveting between flange at the end of the handles. Handles shall be so shaped and positioned to facilitate the carrying and handling of the utensils in normal use ) |
- |
|
|
|
| 7.2 (Handles shall be sufficiently strong to support a mass in the utensils equivalent to three times the mass of the water capacity of the utensils in the position of normal use without visible permanent deformation of the handle or utensil) |
- |
|
|
|
| 8.1 (The utensils shall be clean reasonably free from distortion, dents, wrinkles, wavy surface, burrs, scratches, pitting and deep tool marks and other surface defects) |
- |
|
|
|
| 8.2 (The design of the utensils shall be such that it is easy to clean and prevent accumulation of dirt) |
- |
|
|
|
| 8.4.1.2 ( Finish of the coating: The coating shall be smooth continuous and uniform in appearance, and shall be adherent. It shall be free from powdery areas, loose films and discontinuities, such as breaks and scratches. The size and number of contact marks shall be minimum consistent with good practice.) |
- |
|
|
|
| 8.4.2 (A coating of thickness 25 to 100 microns is generally required) |
- |
|
|
|
| 8.4.3 (Abrasion Resistance When the coating surface is rubbed two or three times with emery paper with emery conforming to grit number 180 using medium finger pressure, it shall not abrade the surface but shall skid over the surface showing not more than a trace of whitening of the surface) |
- |
|
|
|
| 8.4.4 (The colour of the hard anodic coating varies depending upon the alloy, thickness of the coating and electrolye. Normally the colour may vary from dark grey (almost black) to light grey. ) |
- |
|
|
|
| 8.4.5 (When the coated surface is rubbed two or three times with fine emery paper grit number 180 using medium finger pressure, cloth or paper shall not abrade the surface. A faint trace of whitening on the cloth or paper is permissible) |
- |
|
|
|
| 0.5 (Fabrication) |
- |
|
|
|
|
- |
-
- |
| 11292 |
BIS, Bengaluru Branch Laboratory (BNBL)
| None
| IS 1538 (1993) |
Cast iron fittings for pressure pipes for water, gas and sewage - Specification (Third Revision) |
- |
Rs 2700/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1 (The metal used for the manufacture of pipe shall be of a quality not less than that specified for grade FG 150 of IS 210 ) |
- |
|
|
|
| 8 (Hydrostatic Test) |
- |
|
|
|
| 9.1,Table 2 & 3 (DI) |
- |
|
|
|
| 9.1,Table 2 & 3 (P) |
- |
|
|
|
| 9.1,Table 2 & 3 (g) |
- |
|
|
|
| 9.1,Table 2 & 3 (h) |
- |
|
|
|
| 9.1,Table 2 & 3 (K) |
- |
|
|
|
| 9.1,Table 2 & 3 (L) |
- |
|
|
|
| 9.1,Table 2 & 3 (M) |
- |
|
|
|
| 9.1,Table 2 & 3 (N) |
- |
|
|
|
| 9.1,Table 2 & 3 (f) |
- |
|
|
|
| 9.1,Table 4 (D) |
- |
|
|
|
| 9.1,Table 4 (a) |
- |
|
|
|
| 9.1,Table 4 (b) |
- |
|
|
|
| 9.1,Table 4 (s) |
- |
|
|
|
| 9.1,Table 4 (r) |
- |
|
|
|
| 9.1,Table 5 (D) |
- |
|
|
|
| 9.1,Table 5 (g) |
- |
|
|
|
| 9.1,Table 5 (a) |
- |
|
|
|
| 9.1,Table 5 (b) |
- |
|
|
|
| 9.1,Table 5 (c) |
- |
|
|
|
| 9.1,Table 5 (f) |
- |
|
|
|
| 9.1,Table 5 (s) |
- |
|
|
|
| 9.1,Table 5 (C) |
- |
|
|
|
| 9.1,Table 5 (Holes No) |
- |
|
|
|
| 9.1,Table 5 (Holes diameter) |
- |
|
|
|
| 9.1,Table 6 (Diameterof Bolts) |
- |
|
|
|
| 9.1&11.1,Table 7,8&9 (e) |
- |
|
|
|
| 9.1&11.1,Table 7,8&9 (l) |
- |
|
|
|
| 9.1&11.1,Table 7,8&9 (Mass (Approx)) |
- |
|
|
|
| 9.1&11.1,Table 10 to13 (e) |
- |
|
|
|
| 9.1&11.1,Table 10 to13 (r) |
- |
|
|
|
| 9.1&11.1,Table 10 to13 (a) |
- |
|
|
|
| 9.1&11.1,Table 10 to13 (b) |
- |
|
|
|
| 9.1&11.1,Table 10 to13 (Mass (Approx)) |
- |
|
|
|
| 9.1&11.1,Table 14 (Nominal Diameter) |
- |
|
|
|
| 9.1&11.1,Table 14 (e) |
- |
|
|
|
| 9.1&11.1,Table 14 (e1) |
- |
|
|
|
| 9.1&11.1,Table 14 (l) |
- |
|
|
|
| 9.1&11.1,Table 14 (h) |
- |
|
|
|
| 9.1&11.1,Table 14 (Mass (Approx)) |
- |
|
|
|
| 9.1&11.1,Table 15 (e) |
- |
|
|
|
| 9.1&11.1,Table 15 (l) |
- |
|
|
|
| 9.1&11.1,Table 15 (Nominal Diameter) |
- |
|
|
|
| 9.1&11.1,Table 15 (e1) |
- |
|
|
|
| 9.1&11.1,Table 15 (k) |
- |
|
|
|
| 9.1&11.1,Table 15 (Mass (Approx)) |
- |
|
|
|
| 9.1&11.1,Table 16 (e) |
- |
|
|
|
| 9.1&11.1,Table 16 (l) |
- |
|
|
|
| 9.1&11.1,Table 16 (h) |
- |
|
|
|
| 9.1&11.1,Table 16 (Mass (Approx)) |
- |
|
|
|
| 9.1&11.1,Table 17 (e1) |
- |
|
|
|
| 9.1&11.1,Table 17 (l1) |
- |
|
|
|
| 9.1&11.1,Table 17 (Nominal Diameter) |
- |
|
|
|
| 9.1&11.1,Table 17 (e2) |
- |
|
|
|
| 9.1&11.1,Table 17 (l2) |
- |
|
|
|
| 9.1&11.1,Table 17 (l3) |
- |
|
|
|
| 9.1&11.1,Table 17 (l) |
- |
|
|
|
| 9.1&11.1,Table 17 (Mass) |
- |
|
|
|
| 9.1&11.1,Table 18 (a) |
- |
|
|
|
| 9.1&11.1,Table 18 (P) |
- |
|
|
|
| 9.1&11.1,Table 18 (Mass (Approx)) |
- |
|
|
|
| 9.1&11.1,Table 19 (DC) |
- |
|
|
|
| 9.1&11.1,Table 19 (e) |
- |
|
|
|
| 9.1&11.1,Table 19 (a) |
- |
|
|
|
| 9.1&11.1,Table 19 (l) |
- |
|
|
|
| 9.1&11.1,Table 19 (Mass (Approx)) |
- |
|
|
|
| 9.1&11.1,Table 20 (DI) |
- |
|
|
|
| 9.1&11.1,Table 20 (h) |
- |
|
|
|
| 9.1&11.1,Table 20 (Mass (Approx)) |
- |
|
|
|
| 9.1&11.1,Table 21 (e) |
- |
|
|
|
| 9.1&11.1,Table 21 (r) |
- |
|
|
|
| 9.1&11.1,Table 21 (a) |
- |
|
|
|
| 9.1&11.1,Table 21 (b) |
- |
|
|
|
| 9.1&11.1,Table 26 (e1) |
- |
|
|
|
| 9.1&11.1,Table 21 (Mass (Approx)) |
- |
|
|
|
| 9.1&11.1,Table 22 (e) |
- |
|
|
|
| 9.1&11.1,Table 22 (r) |
- |
|
|
|
| 9.1&11.1,Table 22 (a) |
- |
|
|
|
| 9.1&11.1,Table 22 (b) |
- |
|
|
|
| 9.1&11.1,Table 22 (c) |
- |
|
|
|
| 9.1&11.1,Table 22 (a) |
- |
|
|
|
| 9.1&11.1,Table 22 (f) |
- |
|
|
|
| 9.1&11.1,Table 22 (g) |
- |
|
|
|
| 9.1&11.1,Table 23 (e) |
- |
|
|
|
| 9.1&11.1,Table 23 (r) |
- |
|
|
|
| 9.1&11.1,Table 23 (a) |
- |
|
|
|
| 9.1&11.1,Table 23 (l) |
- |
|
|
|
| 9.1&11.1,Table 23 (Mass (Approx)) |
- |
|
|
|
| 9.1&11.1,Table 24 (e) |
- |
|
|
|
| 9.1&11.1,Table 24 (l) |
- |
|
|
|
| 9.1&11.1,Table 24 (Nominal Diameter) |
- |
|
|
|
| 9.1&11.1,Table 24 (e1) |
- |
|
|
|
| 9.1&11.1,Table 24 (h) |
- |
|
|
|
| 9.1&11.1,Table 24 (Mass (Approx)) |
- |
|
|
|
| 9.1&11.1,Table 25 (e) |
- |
|
|
|
| 9.1&11.1,Table 25 (l) |
- |
|
|
|
| 9.1&11.1,Table 25 (h) |
- |
|
|
|
| 9.1&11.1,Table 25 (Mass (Approx)) |
- |
|
|
|
|
- |
-
- |
| 11293 |
BIS, Eastern Regional Laboratory (ERL)
| None
| IS 3195 (1992) |
Steel for the manufacture of volute and helical springs (For Railway Rolling Stock) - Specification (Third Revision) |
All grades |
1050 Chemical View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl. 3, 6.1, 6.2 & Table 1 (Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
| Cl. 3, 6.1, 6.2 & Table 1 (Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
| Cl. 3, 6.1, 6.2 & Table 1 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
| Cl. 3, 6.1, 6.2 & Table 1 (Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
| Cl. 3, 6.1, 6.2 & Table 1 (Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
| Cl. 3, 6.1, 6.2 & Table 1 (Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
| Cl. 3, 6.1, 6.2 & Table 1 (Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
| 7 (Hardness) |
- |
|
|
|
| 10 (Freedom from defects) |
- |
|
|
|
| 11 ( DIMENSIONS AND TOLERANCES) |
- |
|
|
|
| 8 (Decarburisation) |
- |
|
|
|
| 9 (Inclusion rating) |
- |
|
|
|
| 12 (Calculation of mass) |
- |
|
|
|
|
- |
-
Chem- Facility not available for Vanadium. |
| 11294 |
BIS, Bengaluru Branch Laboratory (BNBL)
| None
| IS 14846 (2000) |
Sluice valve for water works purposes (50 To 1200 mm size) - specification |
- |
complete testing charges for the product are Rs.5700.00 View breakup
complete testing charges for the product are Rs.5700.00
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4 (Nominal Pressures) |
- |
|
|
|
| 5.1 (Nominal Sizes) |
- |
|
|
|
| 5.1.1 (Actual Bore) |
- |
|
|
|
| 7.2.1 (Manufacture - Bodies and Bonnets) |
- |
|
|
|
| 7.2.1 (Manufacture - Bodies ) |
- |
|
|
|
| 7.2.2 (Manufacture - Bodies and Bonnets) |
- |
|
|
|
| 7.2.3 (Manufacture) |
- |
|
|
|
| 7.2.4 (Manufacture) |
- |
|
|
|
| 7.2.4 (Manufacture) |
- |
|
|
|
| 7.2.4 (Manufacture) |
- |
|
|
|
| 7.3 Table 3A 1 (Flanges) |
- |
|
|
|
| 7.3 Table 3A 2 (Flanges) |
- |
|
|
|
| 7.3 Table 3A 3 (Flanges) |
- |
|
|
|
| 7.3 Table 3A 4 (Flanges) |
- |
|
|
|
| 7.3 Table 3A 5 (Flanges) |
- |
|
|
|
| 7.3 Table 3A 6 (Flanges) |
- |
|
|
|
| 7.4.1 (Wedges ) |
- |
|
|
|
| 7.4.1 (Wedges) |
- |
|
|
|
| 7.4.1 (Wedges) |
- |
|
|
|
| 7.4.2 (Wedge Faces) |
- |
|
|
|
| 7.5 (Guides and Lugs) |
- |
|
|
|
| 7.5 (Guides and Lugs) |
- |
|
|
|
| 7.5 (Guides and Lugs) |
- |
|
|
|
| 7.5.1 (Guides and Lugs) |
- |
|
|
|
| 7.6 Table 4 (Facing or Seat Rings) |
- |
|
|
|
| 7.6 Table 4 (Facing or Seat Rings) |
- |
|
|
|
| 7.6 Table 4 (Facing or Seat Rings) |
- |
|
|
|
| 7.6 Table 4 (Facing or Seat Rings) |
- |
|
|
|
| 7.7.1 Table 2,3 (Dimension of Stem and Wedge Nuts) |
- |
|
|
|
| 7.7.1 Table 2,3 (Dimension of Stem and Wedge Nuts) |
- |
|
|
|
| 7.7.1 Table 2,3 (Dimension of Stem and Wedge Nuts) |
- |
|
|
|
| 7.7.1 Table 2,3 (Dimension of Stem and Wedge Nuts) |
- |
|
|
|
| 7.7.1 Table 2,4 (Dimension of Stem and Wedge Nuts) |
- |
|
|
|
| 7.7.1 Table 2,5 (Dimension of Stem and Wedge Nuts) |
- |
|
|
|
| 7.7.2 (Stem and Wedge Nuts) |
- |
|
|
|
| 7.7.3 (Stem and Wedge Nuts) |
- |
|
|
|
| 7.7.4 (Stem and Wedge Nuts) |
- |
|
|
|
| 7.7.4 (Stem and Wedge Nuts) |
- |
|
|
|
| 7.9 (Height of Valve) |
- |
|
|
|
| 7.1 (Gears) |
- |
|
|
|
| 7.11 (Hand Wheel) |
- |
|
|
|
| 7.11 (Hand Wheel) |
- |
|
|
|
| 7.11 (Hand Wheel) |
- |
|
|
|
| 7.12 (Valve Caps) |
- |
|
|
|
| 7.12 (Valve Caps) |
- |
|
|
|
| 7.12 (Valve Caps) |
- |
|
|
|
| 7.12 (Valve Caps) |
- |
|
|
|
| 7.13 Table 2, 3 (Stuffing Box ) |
- |
|
|
|
| 7.13 Table 2, 3 (Stuffing Box ) |
- |
|
|
|
| 7.13 Table 2, 3 (Stuffing Box ) |
- |
|
|
|
| 7.13 Table 2, 3 (Stuffing Box ) |
- |
|
|
|
| 7.14 (By Pass Arrangements) |
- |
|
|
|
| 7.14 (By Pass Arrangements) |
- |
|
|
|
| 8 (Accessories or Optical Features) |
- |
|
|
|
| 9 (Coating) |
- |
|
|
|
| 10.1 Annex B-1 (Hydraulic Test) |
- |
|
|
|
| 10.1 Annex B-2 (Hydraulic Test) |
- |
|
|
|
| 10.2 (Flaw Detection Test for Stems) |
- |
|
|
|
|
- |
-
- |
| 11295 |
BIS, Central Laboratory (CL)
| None
| IS 6528 (1995) |
Stainless steel wire - Specification (First Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Table 7 (Workmanship) |
- |
|
|
|
| Cl 6 (Workmanship) |
- |
|
|
|
| Cl 9.1 & Table 3 (Diameter & Out Of Round) |
- |
|
|
|
| Cl 10 (UTM) |
- |
|
|
|
| Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1) (Carbon) |
- |
|
|
|
| Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1) (Sulphor) |
- |
|
|
|
| Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1) (Phosphorous) |
- |
|
|
|
| Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1) (Manganese) |
- |
|
|
|
| Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1) (Silicon) |
- |
|
|
|
| Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1) (Aluminium) |
- |
|
|
|
| Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1) (Chromium) |
- |
|
|
|
| Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1) (Nickel) |
- |
|
|
|
| Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1) (Molybdenum) |
- |
|
|
|
| Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1) (Copper) |
- |
|
|
|
| Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1) (Boron) |
- |
|
|
|
| Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1) (Vanadium) |
- |
|
|
|
| Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1) (Titanium) |
- |
|
|
|
| Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1) (Nitrogen) |
- |
|
|
|
|
- |
-
excluding Sample size shall be minimum dia> 3mm and thickness > 0.8 mm; |
| 11296 |
BIS, Bengaluru Branch Laboratory (BNBL)
| None
| IS 13334 : Part 1 (2014) |
Skimmed milk powder - Specification: Part 1 standard grade (Second Revision) |
- |
Rs 24306/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.6 (Listeria monocytogenes) |
- |
|
|
|
| 5.6 (Spore count, Anaerobic (Sulfite reducing Clostridia)) |
- |
|
|
|
| 5.6 (Spore count, Aerobic (Bacillus cereus)) |
- |
|
|
|
| 5.6 (Salmonella) |
- |
|
|
|
| 5.6 (Coagulase positive Staphylococcus aureus) |
- |
|
|
|
| 5.6 (Escherichia coli) |
- |
|
|
|
| 5.6 (Coliform count ) |
- |
|
|
|
| 5.6 (Bacterial count) |
- |
|
|
|
| 5.6 (Coliform count ) |
- |
|
|
|
| 5.6 (Bacterial count) |
- |
|
|
|
| 5.6 (Coliform count ) |
- |
|
|
|
| 5.6 (Listeria monocytogenes) |
- |
|
|
|
| 5.6 (Bacterial count) |
- |
|
|
|
| 5.6 (Coliform count ) |
- |
|
|
|
| 5.6 (Scorched particles) |
- |
|
|
|
| 5.6 (Titratable acidity (lactic acid)) |
- |
|
|
|
| 5.6 (Total ash (on dry basis)) |
- |
|
|
|
| 5.6 (Insolubility index) |
- |
|
|
|
| 5.6 (Milk fat) |
- |
|
|
|
| 5.6 (Milk protein in milk solids not fat) |
- |
|
|
|
| 5.6 (Moisture) |
- |
|
|
|
| 5.2 (Absence of extraneous matter, added colour and added flavour) |
- |
|
|
|
| 4 (Description) |
- |
|
|
|
| Cl 5.4 (The flavour of the product or of the reconstituted
milk shall be pleasant and clean (see IS 10030).) |
- |
|
|
|
| 5.6 (Insolubility index) |
- |
|
|
|
|
- |
-
- |
| 11297 |
BIS, Central Laboratory (CL)
| None
| IS 8521 : Part 1 (1977) |
Specification for industrial safety face shields: Part 1 with plastics visor |
- |
3750/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 3 (General requirements & Specific requirements) |
- |
|
|
|
| Cl 4 (Visual and Dimensional Examination & Physical Requirements (Impact Resistance, Penetration Resistance, Visible Transmittance, Flammability & Disinfection)) |
- |
|
|
|
|
- |
-
- |
| 11298 |
BIS, Central Laboratory (CL)
| None
| IS 15834 (2008) |
Stainless Steel Sliding Door Bolts For Use With Padlocks -specification |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Clause 4.2 (Carbon Content) |
- |
|
|
|
| Clause 4.2 (Silicon) |
- |
|
|
|
| Clause 4.2 (Manganese) |
- |
|
|
|
| Clause 4.2 (nickel) |
- |
|
|
|
| Clause 4.2 (Chromium) |
- |
|
|
|
| Clause 4.2 (Sulphur) |
- |
|
|
|
| Clause 4.2 (Phosphorus) |
- |
|
|
|
|
- |
-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm; |
| 11299 |
BIS, Southern Regional Laboratory (SRL)
| None
| IS 1879 (2010) |
Malleable cast iron pipe fittings - Specification (Third Revision) |
- |
Rs.7800.00 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.1.1 (Type of Fittings - IS 1879) |
- |
|
|
|
| 5.1.2 (Size designation - IS 1879) |
- |
|
|
|
| 5.1.2.1 (Equal fitting - IS 1879) |
- |
|
|
|
| 5.1.2.2 (Unequal fitting -IS 1879) |
- |
|
|
|
| 5.1.3 (Right and Left hand thread - IS 1879) |
- |
|
|
|
| 5.1.1 (Code Number -IS 1879) |
- |
|
|
|
| 6.1 (Tensile Strength - IS 14329) |
- |
|
|
|
|
- |
-
" 3 pcs+1 test bar+50g
Excluding excl thread checking and pressure test |
| 11300 |
BIS, Central Laboratory (CL)
| None
| IS 12681 (1989) |
Sodium nitrate for explosives and pyrotechnic industry - Specification |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl. 2.2, Table-1, Sr.no. 1 (Assay,) |
- |
|
|
|
| Cl. 2.2, Table-1, Sr.no. 2 (Moisture and volatile matter ) |
- |
|
|
|
| Cl. 2.2, Table-1, Sr.no. 3 (matter insoluble in water) |
- |
|
|
|
| Cl. 2.2, Table-1, Sr.no. 4 (Nitrites (as NaNO2)) |
- |
|
|
|
| Cl. 2.2, Table-1, Sr.no. 5 (Chlorides (as NaCl)) |
- |
|
|
|
| Cl. 2.2, Table-1, Sr.no. 6 (Sulphates( as Na2SO4)) |
- |
|
|
|
| Cl. 2.2, Table-1, Sr.no. 7 (Chlorates) |
- |
|
|
|
| Cl. 2.2, Table-1, Sr.no. 9 (Iodates(NaIO4)) |
- |
|
|
|
| Cl. 2.2, Table-1, Sr.no. 10 (Total calcium and magnesium or compounds of these metals calculated as oxides.) |
- |
|
|
|
| Cl. 2.2, Table-1, Sr.no. 11 (Ammonium compounds (as NH4NO3)) |
- |
|
|
|
| Cl. 2.2, Table-1, Sr.no. 12 (pH of 10 percent solution) |
- |
|
|
|
| Cl. 2.2, Table-1, Sr.no. 1 (Assay,) |
- |
|
|
|
| Cl. 2.2, Table-1, Sr.no. 2 (Moisture and volatile matter ) |
- |
|
|
|
| Cl. 2.2, Table-1, Sr.no. 3 (matter insoluble in water) |
- |
|
|
|
| Cl. 2.2, Table-1, Sr.no. 4 (Nitrites (as NaNO2)) |
- |
|
|
|
| Cl. 2.2, Table-1, Sr.no. 5 (Chlorides (as NaCl)) |
- |
|
|
|
| Cl. 2.2, Table-1, Sr.no. 6 (Sulphates( as Na2SO4)) |
- |
|
|
|
| Cl. 2.2, Table-1, Sr.no. 7 (Chlorates) |
- |
|
|
|
| Cl. 2.2, Table-1, Sr.no. 9 (Iodates(NaIO4)) |
- |
|
|
|
| Cl. 2.2, Table-1, Sr.no. 10 (Total calcium and magnesium or compounds of these metals calculated as oxides.) |
- |
|
|
|
| Cl. 2.2, Table-1, Sr.no. 11 (Ammonium compounds (as NH4NO3)) |
- |
|
|
|
| Cl. 2.2, Table-1, Sr.no. 12 (pH of 10 percent solution) |
- |
|
|
|
|
- |
-
- |
| 11301 |
BIS, Central Laboratory (CL)
| None
| IS 7098 : Part 1 (1988) |
Specification for crosslinked polyethylene insulated pvc sheathed cables: Part 1 for working voltages up to and including 1100 volts (First Revision) |
- |
26250 View breakup
Rs.26250.00, extra charges @35% for each additional core shall be levied.optional test the charges shall be levied Rs.1200.00
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3 (CONDUCTOR: MATERIALS) |
- |
|
|
|
| 4 (INSULATION : MATERIALS) |
- |
|
|
|
| 5.1 (FILLER AND INNER SHEATH) |
- |
|
|
|
| 5.2 (FILLER AND INNER SHEATH) |
- |
|
|
|
| 6 (ARMOURING) |
- |
|
|
|
| 7 (OUTER SHEATH) |
- |
|
|
|
| 8.1 (CONDUCTOR: CONSTRUCTION) |
- |
|
|
|
| 8.2 (PROTECTIVE BARRIER) |
- |
|
|
|
| 8.3 (SIZE OF NEUTRAL CONDUCTOR) |
- |
|
|
|
| 9.1 (Insulation Applied by extrusicn) |
- |
|
|
|
| 9.2 (Thickness of Insulation - Average) |
- |
|
|
|
| 9.3 (Thickness of Insulation - Minimum) |
- |
|
|
|
| 9.2 (Thickness of Insulation - Average) |
- |
|
|
|
| 9.3 (Thickness of Insulation - Minimum) |
- |
|
|
|
| 9.4 (Application of Insulation) |
- |
|
|
|
| 10.1 (Core Identification) |
- |
|
|
|
| 10.2 (Core Identification- Neutral) |
- |
|
|
|
| 10.3 (Core Identification by number ) |
- |
|
|
|
| 10.4 (Core Identification by number - Neutral ) |
- |
|
|
|
| 11 (LAVING UP OF CORES) |
- |
|
|
|
| 12.1 & 12.2 (Inner sheath : Application) |
- |
|
|
|
| 12.3 (Thickness of Inner Sheath) |
- |
|
|
|
| 13.1 (Armouring: Application) |
- |
|
|
|
| 13.1.2 (Armouring: Coverage ) |
- |
|
|
|
| 13.1.3 (Armouring: Direction of Lay ) |
- |
|
|
|
| 13.2 (Type of armour ) |
- |
|
|
|
| 13.3 (Armouring : Dimensions -Wire Diameter) |
- |
|
|
|
| 13.3 (Armouring : Dimensions -Formed wire ) |
- |
|
|
|
| 13.4 (Armour: Joint) |
- |
|
|
|
| 13.5 (Armouring : Resistance Test) |
- |
|
|
|
| 13.6 a) (ARMOURING: Tensile Strength) |
- |
|
|
|
| 13.6 b) (ARMOURING: Elongation ) |
- |
|
|
|
| 13.6 c) (ARMOURING: Torsion Test (For round wire ) ) |
- |
|
|
|
| 13.6 d) (ARMOURING: Winding Test(For formed wire)) |
- |
|
|
|
| 13.6 e) (ARMOURING: Uniformity of zinc coating) |
- |
|
|
|
| 13.6 f) (ARMOURING: Mass of zinc coating ) |
- |
|
|
|
| 13.6 g) (ARMOURING: Resistivity) |
- |
|
|
|
| 14.1 (Outer Sheath : Application) |
- |
|
|
|
| 14.2 (Colour of outer sheath) |
- |
|
|
|
| 14.3 (Thickness of outer sheath - AVERAGE) |
- |
|
|
|
| 14.3 (Thickness of outer sheath - minimum) |
- |
|
|
|
| 15.1 a) i) (Annealing Test ( For copper wire ) ) |
- |
|
|
|
| 15.1 a) ii) (Tensile test (for aluminium) - Before stranding ) |
- |
|
|
|
| 15.1 a) ii) (Tensile test (for aluminium) - After stranding ) |
- |
|
|
|
| 15.1 a) iii) (Wrapping test (for aluminium)) |
- |
|
|
|
| 15.1 a) iv) (Resistance test - Main conductor) |
- |
|
|
|
| 15.1 a) iv) (Resistance test - Neutral conductor) |
- |
|
|
|
| 15.1 d) i) (Phyaical tests for insulation : Tensile Test) |
- |
|
|
|
| 15.1 d) i) (Phyaical tests for insulation : Elongation) |
- |
|
|
|
| 15.1 d) ii) (Phyaical tests for insulation - Ageing in air Oven : Tensile Variation ) |
- |
|
|
|
| 15.1 d) ii) (Phyaical tests for insulation- Ageing in air oven : Elongation Variation ) |
- |
|
|
|
| 15.1 d) iii) (Phyaical tests for insulation : Hot set ) |
- |
|
|
|
| 15.1 d) iii) (Phyaical tests for insulation : Permanent set ) |
- |
|
|
|
| 15.1 d) iv) (Phyaical tests for insulation : Shrinkage ) |
- |
|
|
|
| 15.1 d) iv) (Phyaical tests for insulation : Shrinkage - Crack observed ) |
- |
|
|
|
| 15.1 d) v) (Insulation: Waterabsorption(gravimetric)) |
- |
|
|
|
| 15.1 e) i) (Physical tests for outer sheath : Tensile stregth) |
- |
|
|
|
| 15.1 e) i) (Physical tests for outer sheath : Elongation) |
- |
|
|
|
| 15.1 e) ii) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth ) |
- |
|
|
|
| 15.1 e) ii) (Physical tests for outer sheath -Ageing in air oven : Elongation ) |
- |
|
|
|
| 15.1 e) ii) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation ) |
- |
|
|
|
| 15.1 e) ii) (Physical tests for outer sheath -Ageing in air oven : Elongation Variation ) |
- |
|
|
|
| 15.1 e) iii) (Sheath: Loss of mass in air oven) |
- |
|
|
|
| 15.1 e) iv) (Phyaical tests for Sheath : Shrinkage ) |
- |
|
|
|
| 15.1 d) iv) (Phyaical tests for insulation : Shrinkage - Crack observed ) |
- |
|
|
|
| 15.1 e) v) (Sheath : Hot deformation) |
- |
|
|
|
| 15.1 e) vi) (Sheath : Heat shock test) |
- |
|
|
|
| 15.1 e) vii) (Sheath : Thermalstability) |
- |
|
|
|
| 15.1 f) (INSULATION RESISTANCE TEST : Volume resistivity ) |
- |
|
|
|
| 16.2 (HIGH VOLTAGE TEST ) |
- |
|
|
|
| 16.3 (FLAMMABILITY TEST : Period of Burning ) |
- |
|
|
|
| 16.3 (FLAMMABILITY TEST : Unaffected length ) |
- |
|
|
|
| 17.1 (Manufacturer'. identification) |
- |
|
|
|
| 17.2 (cable Indentification ) |
- |
|
|
|
| Cl.8 (Conductor) |
- |
|
|
|
| Cl.8 (Conductor) |
- |
|
|
|
| Cl.8 (Conductor) |
- |
|
|
|
| Cl.15.4 (Cold Bend Test (for outer sheath)) |
- |
|
|
|
| Cl.15.4 (Cold Impact Test (For outer sheath)) |
- |
|
|
|
| Cl.13.5.1 and Table 7 (Resistance Test for Armouring (other than mining Cables)) |
- |
|
|
|
|
- |
-
TF not available Cat C1 & C2 |
| 11302 |
BIS, Northern Regional Laboratory (NRL)
| None
| IS 778 (1984) |
Specification for 2010 copper alloy gate, globe and check valves for waterworks purposes (Fourth Revision) |
- |
Rs 4500/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7.1.1 (Body End Ports -IS 778) |
- |
|
|
|
| 7.1.2 (Water-Way Area - IS 778) |
- |
|
|
|
| 7.1.3.1-Table2 (length of threaded portion in screwed end valves - IS 778) |
- |
|
|
|
| 7.1.4.1- Table 3 (Diameter of flange - IS 778) |
- |
|
|
|
| 7.1.4.1- Table 3 (Thickness of flange - IS 778) |
- |
|
|
|
| 7.1.4.1- Table 3 (Diameter of Belt circle -IS 778) |
- |
|
|
|
| 7.1.4.1- Table 3 (Diameter of holes -IS 778) |
- |
|
|
|
| 7.1.3.1 (Thread -IS 778) |
- |
|
|
|
| 7.2.1.2 (pitch of threads - IS 778) |
- |
|
|
|
| 7.2.2 (Bonnet Flanges - IS 778) |
- |
|
|
|
| 7.6.3 (actuating threads - IS 778) |
- |
|
|
|
| 8.1- Table 4 (Thickness of Body and Bonnet- IS 778) |
- |
|
|
|
| 8.2 - Table 5 (Flat to Flat size -IS 778 ) |
- |
|
|
|
| 8.3 - Table 6 (Width of end - IS 778) |
- |
|
|
|
| 8.4 - Table 7 (Stem Diameters - IS 778) |
- |
|
|
|
| 8.5 - Table 8 (Depth of stuffing box - IS 778) |
- |
|
|
|
| 8.5 - Table 8 (Dia of stuffing box - IS 778) |
- |
|
|
|
| 8.6- Table 9 to Table 12 (End to end/ centre to ends/ Face to face/Centre to face dimension ) |
- |
|
|
|
| 9.3-Table 13 (Body Test ( Hydrostatic)) |
- |
|
|
|
| 9.4 (Back Seat Test ) |
- |
|
|
|
| 9.5-Table 13 (Seat Test ( Hydrostatic)) |
- |
|
|
|
|
- |
-
Facility for chemical testing is not available |
| 11303 |
BIS, Central Laboratory (CL)
| None
| IS 12817 (2013) |
Stainless steel butt hinges - Specification (Second Revision) |
- |
Rs. 2400/- and testing charges as per referred Iss View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6.2, Table 1 to 6 (Length , A -IS 12817) |
- |
|
|
|
| 6.2, Table 1 to 6 (Breadth, B-IS 12817) |
- |
|
|
|
| 6.2, Table 1 to 6 (Thickness of flap, C-IS 12817) |
- |
|
|
|
| 6.2, Table 1 to 6 (Dia. of Hinge pin, D-IS 12817 ) |
- |
|
|
|
| 6.2, Table 1 to 6 (Number of Knuckles- IS 12817 ) |
- |
|
|
|
| 6.2, Table 1 to 6 (Number of Screw Holes -IS 12817 ) |
- |
|
|
|
| 6.2, Table 1 to 6 (Holes for Screw Number- IS 12817 ) |
- |
|
|
|
| 7.1 (General - IS 12817 ) |
- |
|
|
|
| 7.2 (Knuckles - IS 12817 ) |
- |
|
|
|
| 7.3 (Pins- IS 12817 ) |
- |
|
|
|
| 7.4 (Screw Holes- IS 12817 ) |
- |
|
|
|
| 7.4.2 (Position of screw holes - IS 12817 ) |
- |
|
|
|
| 7.4.2, Fig 1 (The distance of the screw holes from the end of the flap - IS 12817 ) |
- |
|
|
|
| 8 (Finish - IS 12817 ) |
- |
|
|
|
|
- |
-
- |
| 11304 |
BIS, Bengaluru Branch Laboratory (BNBL)
| None
| IS 4148 (1989) |
Surgical rubber gloves - Specification (First Revision) |
- |
Rs. 3925/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.5 (pH of Aqueous Extract ) |
- |
|
|
|
| 4.1.1 (Manufacture) |
- |
|
|
|
| 4.1.3 (Manufacture) |
- |
|
|
|
| 4.1.4 (Manufacture) |
- |
|
|
|
| 4.2 (Dimensions Fig 1 and Table 1) |
- |
|
|
|
| 4.2 (Dimensions Fig 1 and Table 1) |
- |
|
|
|
| 4.2 (Dimensions Fig 1 and Table 1) |
- |
|
|
|
| 4.2 (Dimensions Fig 1 and Table 1) |
- |
|
|
|
| 4.2 (Dimensions Fig 1 and Table 1) |
- |
|
|
|
| 4.2 (Dimensions Fig 1 and Table 1) |
- |
|
|
|
| 4.2 (Dimensions Fig 1 and Table 1) |
- |
|
|
|
| 4.3 (Thickness) |
- |
|
|
|
| 4.4.1 (Physical Properties) |
- |
|
|
|
| 4.4.1 (Physical Properties) |
- |
|
|
|
| 4.4.2 (After accelerated aging at 70 + 1OC for 240 h ) |
- |
|
|
|
| 4.4.2 (After accelerated aging at 70 + 1OC for 240 h ) |
- |
|
|
|
| 4.4.3 (After heat ageing in autoclave) |
- |
|
|
|
| 4.4.3 (After heat ageing in autoclave) |
- |
|
|
|
| 4.4.4 (Tension Set) |
- |
|
|
|
|
- |
-
- |
| 11305 |
BIS, Bengaluru Branch Laboratory (BNBL)
| None
| IS 13487 (1992) |
Irrigation equipment - Emitters - Specification |
- |
Rs.4200/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7.1 (Construction and workmanship) |
- |
|
|
|
| 7.2 (Flow path in emitters) |
- |
|
|
|
| 7.3.1 (Resistance to Hydrostatic pressure) |
- |
|
|
|
| 7.3.2 (Resistance to Hydrostatic pressure) |
- |
|
|
|
| 7.3.3 (Resistance to Hydrostatic pressure) |
- |
|
|
|
| 7.4.1 (Emitter Pull Out In-line emitters) |
- |
|
|
|
| 7.4.2 (Emitter Pull Out On-line emitters) |
- |
|
|
|
| 8.1.2 (Uniformity of Emission Rate Unregulated emitters) |
- |
|
|
|
| 8.1.2 (Uniformity of Emission Rate Unregulated emitters) |
- |
|
|
|
| 8.1.3 (Uniformity of Emission Rate Regulated emitters) |
- |
|
|
|
| 8.2.2 (Emission rate as a function of inlet pressure Unregulated emitters) |
- |
|
|
|
| 8.2.3 (Emission rate as a function of inlet pressure Regulated emitters) |
- |
|
|
|
| 8.3 (Determination of Emitter Exponent) |
- |
|
|
|
| 4 (Classification) |
- |
|
|
|
|
- |
-
- |
| 11306 |
BIS, Bengaluru Branch Laboratory (BNBL)
| None
| IS 1341 (2018) |
Steel Butt Hinges - Specification (Sixth Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3 Tables 2 to 9 (Types) |
- |
|
|
|
| 5.1 Tables 2 to 9 (2) (Size of Hinge) |
- |
|
|
|
| 5.1 Tables 2 to 9 (3) (Length A) |
- |
|
|
|
| 5.1 Tables 2 to 9 (4) (Breadth B) |
- |
|
|
|
| 5.1 Tables 2 to 9 (4) (Breadth B1) |
- |
|
|
|
| 5.1 Tables 2 to 9 (4) (Breadth B2) |
- |
|
|
|
| 5.1 Tables 2 to 9 (5) (Thickness of Flap C) |
- |
|
|
|
| 5.1 Tables 2 to 9 (6) (Diameter of Hinge Pin D) |
- |
|
|
|
| 5.1 Tables 2 to 9 (7) (Number of Knuckles) |
- |
|
|
|
| 5.1 Tables 2 to 9 (8) (Number of Screw Holes) |
- |
|
|
|
| 5.1 Tables 2 to 9 (9) (Holes for Screw No.) |
- |
|
|
|
| 6.1 (General) |
- |
|
|
|
| 6.1 (General) |
- |
|
|
|
| 6.1 (General) |
- |
|
|
|
| 6.2.1 (Knuckles) |
- |
|
|
|
| 6.3 (Pins) |
- |
|
|
|
| 6.4 (Screw Holes) |
- |
|
|
|
| 6.4.2 (Position of Holes) |
- |
|
|
|
| 6.4.2 (X) |
- |
|
|
|
| 6.4.2 (Y) |
- |
|
|
|
| 6.4.2 (Z) |
- |
|
|
|
| 6.4.2.1 (Position of Holes) |
- |
|
|
|
| 6.4.2 (X) |
- |
|
|
|
|
- |
-
- |
| 11307 |
BIS, Bengaluru Branch Laboratory (BNBL)
| None
| IS 12933 : Part 1 (2003) |
Solar flat plate collector - Specification: Part 1 requirements (Second Revision) |
- |
Rs. 4200/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4 (Components: The various components of solar flat plate collector shall be as specified in IS 12933 (Part 2)) |
- |
|
|
|
| 4 (Components: The various components of solar flat plate collector shall be as specified in IS 12933 (Part 2)) |
- |
|
|
|
| 4 (Components: The various components of solar flat plate collector shall be as specified in IS 12933 (Part 2)) |
- |
|
|
|
| 4 (Components: The various components of solar flat plate collector shall be as specified in IS 12933 (Part 2)) |
- |
|
|
|
| 4 (Components: The various components of solar flat plate collector shall be as specified in IS 12933 (Part 2)) |
- |
|
|
|
| 4 (Components: The various components of solar flat plate collector shall be as specified in IS 12933 (Part 2)) |
- |
|
|
|
| 4 (Components: The various components of solar flat plate collector shall be as specified in IS 12933 (Part 2)) |
- |
|
|
|
| 7.1.1 (Static Pressure Leakage Test) |
- |
|
|
|
| 7.2.5 (Impact Resistance Test) |
- |
|
|
|
| 4 (Components: The various components of solar flat plate collector shall be as specified in IS 12933 (Part 2)) |
- |
|
|
|
| 4 (Components: The various components of solar flat plate collector shall be as specified in IS 12933 (Part 2)) |
- |
|
|
|
| 4 (Components: The various components of solar flat plate collector shall be as specified in IS 12933 (Part 2)) |
- |
|
|
|
| 4 (Components: The various components of solar flat plate collector shall be as specified in IS 12933 (Part 2)) |
- |
|
|
|
|
- |
-
Acceptable Tests
Outdoor no Flow Exposure Test
External Thermal Shock Test
Rain penetration Test
Thermal Efficiency Test
Incident angle modifier Test |
| 11308 |
BIS, Bengaluru Branch Laboratory (BNBL)
| None
| IS 1038 (1983) |
Specification For Steel Doors, Windows And Ventilators |
- |
3000 View breakup
Hence complete testing charges for the product are Rs.3000.00
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1. (Size-Height) |
- |
|
|
|
| 4.1 (Size-Width) |
- |
|
|
|
| 4.3 (Designation) |
- |
|
|
|
| 5 (Material-Rolled Steel Section) |
- |
|
|
|
| 5 (Material-Coupling Section) |
- |
|
|
|
| 5 (Material-Glass Panels) |
- |
|
|
|
| 6.1.1.1 (Visual Inspection Test) |
- |
|
|
|
| 6.1.1.1 (Visual Inspection Test) |
- |
|
|
|
| 6.1.1.1 (Visual Inspection Test) |
- |
|
|
|
| 6.2 (Side Hung Shutter) |
- |
|
|
|
| 6.2 (Side Hung Shutter) |
- |
|
|
|
| 6.2 (Side Hung Shutter- Thickness of hinge) |
- |
|
|
|
| 6.2 (Side Hung Shutter- Pin diameter) |
- |
|
|
|
| 6.2 (Side Hung Shutter-Width of hinge) |
- |
|
|
|
| 6.2.2 & 6.2.2.1 (Handle and Handle Plate-Material of handel ) |
- |
|
|
|
| 6.2.2 & 6.2.2.1 (Handle and Handle Plate- Thicknesss of handle) |
- |
|
|
|
| 6.2.2 & 6.2.2.1 (Handle and Handle Plate-Material of handel plate) |
- |
|
|
|
| 6.2.2 & 6.2.2.1 (Handle and Handle Plate) |
- |
|
|
|
| 6.2.3 (Peg Stay - Thickness) |
- |
|
|
|
| 6.2.3 (Peg Stay ) |
- |
|
|
|
| 6.2.3 (Peg Stay - Dimensions-A) |
- |
|
|
|
| 6.2.3 (Peg Stay - Dimensions-B) |
- |
|
|
|
| 6.2.3 (Peg Stay - Dimensions-C) |
- |
|
|
|
| 6.2.3 (Peg Stay - Dimensions-D) |
- |
|
|
|
| 6.2.3 (Peg Stay - Dimensions-E) |
- |
|
|
|
| 6.2.3 (Peg Stay - Dimensions-F) |
- |
|
|
|
| 6.2.3 (Peg Stay - Dimensions-G) |
- |
|
|
|
| 6.2.3 (Peg Stay - Dimensions-H) |
- |
|
|
|
| 6.2.3 (Peg Stay - Dimensions-J) |
- |
|
|
|
| 6.2.3 (Peg Stay - Dimensions-K) |
- |
|
|
|
| 6.2.3 (Peg Stay - Dimensions-L) |
- |
|
|
|
| 6.2.3 (Peg Stay - Dimensions-M) |
- |
|
|
|
| 6.3 (Top Hung Ventilator) |
- |
|
|
|
| 6.3 (Top Hung Ventilator) |
- |
|
|
|
| 6.3 (Top Hung Ventilator-Thickness of hinge) |
- |
|
|
|
| 6.3 (Top Hung Ventilator-Pin diameter) |
- |
|
|
|
| 6.3 (Top Hung Ventilator-Width of hinge) |
- |
|
|
|
| 7.1 (Position of Holes) |
- |
|
|
|
| 7.2 Table 2 (Position of Fixing Screws) |
- |
|
|
|
| 7.2 Table 2 (Lugs-A) |
- |
|
|
|
| 7.2 Table 2 (Lugs-B) |
- |
|
|
|
| 7.2 Table 2 (Lugs-C) |
- |
|
|
|
| 7.2 Table 2 (Lugs-D) |
- |
|
|
|
| 7.2 Table 2 (Lugs-E) |
- |
|
|
|
| 7.2 Table 2 (Lugs-F) |
- |
|
|
|
| 7.2 Table 2 (Lugs-G) |
- |
|
|
|
| 8 (Finish) |
- |
|
|
|
| 5 (Material-Rolled Steel Section) |
- |
|
|
|
| 5 (Material-Coupling Section) |
- |
|
|
|
| 5 (Material-Glass Panels) |
- |
|
|
|
| 6.1.1.1 (Visual Inspection Test) |
- |
|
|
|
| 6.1.1.1 (Visual Inspection Test) |
- |
|
|
|
| 6.1.1.1 (Visual Inspection Test) |
- |
|
|
|
| 6.2 (Side Hung Shutter) |
- |
|
|
|
| 6.2 (Side Hung Shutter) |
- |
|
|
|
| 6.2 (Side Hung Shutter- Thickness of hinge) |
- |
|
|
|
| 6.2 (Side Hung Shutter- Pin diameter) |
- |
|
|
|
| 6.2 (Side Hung Shutter-Width of hinge) |
- |
|
|
|
| 6.2.2 & 6.2.2.1 (Handle and Handle Plate-Material of handel ) |
- |
|
|
|
| 6.2.2 & 6.2.2.1 (Handle and Handle Plate- Thicknesss of handle) |
- |
|
|
|
| 6.2.2 & 6.2.2.1 (Handle and Handle Plate-Material of handel plate) |
- |
|
|
|
| 6.2.2 & 6.2.2.1 (Handle and Handle Plate) |
- |
|
|
|
| 6.2.3 (Peg Stay - Thickness) |
- |
|
|
|
| 6.2.3 (Peg Stay ) |
- |
|
|
|
| 6.2.3 (Peg Stay - Dimensions-A) |
- |
|
|
|
| 6.2.3 (Peg Stay - Dimensions-B) |
- |
|
|
|
| 6.2.3 (Peg Stay - Dimensions-C) |
- |
|
|
|
| 6.2.3 (Peg Stay - Dimensions-D) |
- |
|
|
|
| 6.2.3 (Peg Stay - Dimensions-E) |
- |
|
|
|
| 6.2.3 (Peg Stay - Dimensions-F) |
- |
|
|
|
| 6.2.3 (Peg Stay - Dimensions-G) |
- |
|
|
|
| 6.2.3 (Peg Stay - Dimensions-H) |
- |
|
|
|
| 6.2.3 (Peg Stay - Dimensions-J) |
- |
|
|
|
| 6.2.3 (Peg Stay - Dimensions-K) |
- |
|
|
|
| 6.2.3 (Peg Stay - Dimensions-L) |
- |
|
|
|
| 6.2.3 (Peg Stay - Dimensions-M) |
- |
|
|
|
| 6.3 (Top Hung Ventilator) |
- |
|
|
|
| 6.3 (Top Hung Ventilator) |
- |
|
|
|
| 6.3 (Top Hung Ventilator-Thickness of hinge) |
- |
|
|
|
| 6.3 (Top Hung Ventilator-Pin diameter) |
- |
|
|
|
| 6.3 (Top Hung Ventilator-Width of hinge) |
- |
|
|
|
| 7.1 (Position of Holes) |
- |
|
|
|
| 7.2 Table 2 (Position of Fixing Screws) |
- |
|
|
|
| 7.2 Table 2 (Lugs-A) |
- |
|
|
|
| 7.2 Table 2 (Lugs-B) |
- |
|
|
|
| 7.2 Table 2 (Lugs-C) |
- |
|
|
|
| 7.2 Table 2 (Lugs-D) |
- |
|
|
|
| 7.2 Table 2 (Lugs-E) |
- |
|
|
|
| 7.2 Table 2 (Lugs-F) |
- |
|
|
|
| 7.2 Table 2 (Lugs-G) |
- |
|
|
|
| 8 (Finish) |
- |
|
|
|
|
- |
-
- |
| 11309 |
BIS, Central Laboratory (CL)
| None
| IS 3055 : Part 1 (1994) |
Clinical thermometers: Part 1 solid stem type - Specification (Second Revision) |
- |
Rs 5400.00 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.1 (TEMPERATURE SCALE) |
- |
|
|
|
| 5.2 (TEMPERATURE SCALE) |
- |
|
|
|
| 7.1 (Patterns) |
- |
|
|
|
| 7.3 (Stem Classification ) |
- |
|
|
|
| 7.3.1 (Stem) |
- |
|
|
|
| 7.3.1.1 (Stem) |
- |
|
|
|
| 7.3.2 (Maximum Indicating Device (Constriction)) |
- |
|
|
|
| 7.3.2.1 (HARDNESS O F MAXIMUM INDICATING DEVICE) |
- |
|
|
|
| 7.3.3 (Loactor) |
- |
|
|
|
| 7.3.4 (Bulb) |
- |
|
|
|
| 7.3.4.1 (Bulb) |
- |
|
|
|
| 7.3.4.2 (Bulb) |
- |
|
|
|
| 7.3.5 (The bulb, capillary tube and mercury) |
- |
|
|
|
| 7.4 - Table 1-i (Scale range) |
- |
|
|
|
| 7.4 - Table 1-ii (Scale range) |
- |
|
|
|
| 7.4 - Table 1-iii (Smallest scale division) |
- |
|
|
|
| 7.4 - Table 1-iv (Smallest scale division) |
- |
|
|
|
| 7.4 - Table 1-v (Overall length) |
- |
|
|
|
| 7.4 - Table 1-vi (Scale length) |
- |
|
|
|
| 7.4 - Table 1-vii (Thickness of stem) |
- |
|
|
|
| 7.4 - Table 1-viii-a (Bulb length -Oral thermometer
) |
- |
|
|
|
| 7.4 - Table 1-viii-b (Bulb length - Rectal thermometer) |
- |
|
|
|
| 7.4 - Table 1-ix-a (External dia of bulb -Oral thermometer
) |
- |
|
|
|
| 7.4 - Table 1-ix-b (External dia of bulb - Rectal thermometer) |
- |
|
|
|
| 7.4 - Table 1-x (Distance from top of the constriction
to the 35.5°C mark) |
- |
|
|
|
| 7.4 - Table 1-xi (Distance from the highest graduation
line to top of the stem) |
- |
|
|
|
| 7.4 - Table 1-xii (Scale spacing) |
- |
|
|
|
| 7.5.1 (Graduation and Numbering) |
- |
|
|
|
| 7.5.2 (Graduation and Numbering) |
- |
|
|
|
| 7.5.3 (Graduation and Numbering) |
- |
|
|
|
| 7.5.4-a (Graduation and Numbering) |
- |
|
|
|
| 7.5.4-b (Graduation and Numbering) |
- |
|
|
|
| 7.5.4-c (Graduation and Numbering) |
- |
|
|
|
| 7.5.5 (Graduation and Numbering) |
- |
|
|
|
| 7.5.6 (Graduation and Numbering) |
- |
|
|
|
| 7.5.7 (Graduation and Numbering) |
- |
|
|
|
| 7.5.8 (Graduation and Numbering) |
- |
|
|
|
| 8.1 (Appearance) |
- |
|
|
|
| 8.2 (Ageing and Accuracy- Ref IS 6274 : 1971) |
- |
|
|
|
| 8.3-a (lnfluence of Immersion Time) |
- |
|
|
|
| 8.3-b (lnfluence of Immersion Time) |
- |
|
|
|
|
- |
-
- |
| 11310 |
BIS, Bengaluru Branch Laboratory (BNBL)
| None
| IS 10325 (2000) |
Square tins - 15 kg/litre for ghee, vanaspati, edible oils and bakery shortenings - Specification (Second Revision) |
- |
3700 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1 (Dimensions and Tolerances) |
- |
|
|
|
| 4.1 (Dimensions and Tolerances) |
- |
|
|
|
| 4.1 (Dimensions and Tolerances) |
- |
|
|
|
| 4.2.1 (Material) |
- |
|
|
|
| 4.2.1 (Material) |
- |
|
|
|
| 4.2.2 (Handle) |
- |
|
|
|
| 4.3.1 (Manufacture) |
- |
|
|
|
| 4.3.2 (Manufacture) |
- |
|
|
|
| 4.3.3 (Manufacture) |
- |
|
|
|
| 4.3.4 (Manufacture) |
- |
|
|
|
| 4.3.5 (Handle) |
- |
|
|
|
| 4.3.5 (Handle) |
- |
|
|
|
| 4.3.5 (Handle) |
- |
|
|
|
| 4.3.5 (Handle) |
- |
|
|
|
| 4.3.5 (Handle) |
- |
|
|
|
| 4.3.5 (Handle) |
- |
|
|
|
| 5.1 (Air-Pressure Test) |
- |
|
|
|
| 5.2 (Handle Pull Test) |
- |
|
|
|
| 5.3 (Hydraulic Pressure Test) |
- |
|
|
|
| Clause 4.3.6 (Supply Condition) |
- |
|
|
|
| Clause 4.3.7 (Internal Finish) |
- |
|
|
|
| Cl. 4.3.8. (Outside Finish) |
- |
|
|
|
|
- |
-
- |
