BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

11940 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

11251

BIS, Central Laboratory (CL)

None

IS 13457 (1992)

Pesticide - Deltamethrin WP specification

Rs.5000.00 (including cost of CRM). View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2 (Description)	-
Cl. 3.3&3.3.1 Table 1 (Deltamethrin content, )	-
Cl. 3.3 Table 1 (Sieving (material passing through 45 Micron IS Sieve),)	-
Cl. 3.3 Table 1 (Suspensibility, )	-
Cl. 3.3 Table 1 (Acidity (as H2SO4), or Alkalinity (as NaOH))	-
Cl. 3.3 Table 1 (Wettability )	-

-
-

11252

BIS, Eastern Regional Laboratory (ERL)

None

IS 9295 (1983)

Specification for steel tubes for idlers for belt conveyors (First Revision)

Rs 5100/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
8.1.1 Table 1 (Tensile Strength- IS 1608(1))	-
8.1.1 Table 1 (Yield Strength- IS 1608)	-
8.1.1 Table 1 (Elongation Percent- IS 1608)	-
8.2 (Drift Expansion Test- IS 2335)	-
8.3 (Flattening Test- IS 2328)	-
9.1 Table 2 (Outside Diameter)	-
9.1 Table 2 (Thickness)	-
9.1 Table 2 (Mass)	-
13.1.1 (Ovality)	-
13.1.2 (Eccentricity)	-
15.1 (Straightness)	-
16.1 (Length)	-
17.1 (Surface Protection)	-
7.1 (Sulphur- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-
7.1 (Phosphorous- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-
6.2 (Fin height)	-
14.0 (Workmanship)	-

-
Complete

11253

BIS, Bengaluru Branch Laboratory (BNBL)

None

IS 3466 (1988)

Specification For Masonry Cement

Please see remarks. View breakup
Rs. 7350/- excluding chemical tests.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 ( water soluble alkali content - Cl 9 of IS 4032:1985)	-
4.1 (STAINING IS 4032:1985)	-
4.1 (STAINING IS 4032:1985)	-

-
Only Chemical testing facility available.

11254

BIS, Central Laboratory (CL)

None

IS 996 (2009)

Single phase a.c. induction motors for general purpose (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
16.1 (Marking and Diagram of connenctions)	-
16.1 (Marking and Diagram of connenctions)	-
16.1 (Marking and Diagram of connenctions)	-
16.1 (Marking and Diagram of connenctions)	-
16.1 (Marking and Diagram of connenctions)	-
16.1 (Marking and Diagram of connenctions)	-
16.1 (Marking and Diagram of connenctions)	-
16.1 (Marking and Diagram of connenctions)	-
16.1 (Marking and Diagram of connenctions)	-
16.1 (Marking and Diagram of connenctions)	-
16.1 (Marking and Diagram of connenctions)	-
16.1 (Marking and Diagram of connenctions)	-
16.1 (Marking and Diagram of connenctions)	-
16.1 (Marking and Diagram of connenctions)	-
16.1 (Marking and Diagram of connenctions)	-
16.1 (Marking and Diagram of connenctions)	-
10 (Type of enclosures)	-
11 (Methods of cooling)	-
9 (General construction (as per Cl. 9 & F-3))	-
9.1 (General construction (as per Cl. 9 & F-3))	-
9.4.11 (General construction (as per Cl. 9 & F-3))	-
9 (General construction (as per Cl. 9 & F-3))	-
9.4.13 (General construction (as per Cl. 9 & F-3))	-
4.1 (Rated Voltage)	-
4.2 (Rated Frequency)	-
4.3 (Rated Output)	-
4.4 (Rated Speed)	-
7 (Dimensions (Cl.App.F-4))	-
9.5 (Earthing)	-
9.5 (Earthing)	-
9.5 (Earthing)	-
17.3 (a) (No load test at rated voltage and frequency )	-
17.3 (a) (No load test at rated voltage and frequency)	-
17.3 (a) (No load test at rated voltage and frequency)	-
12.1.1 (Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-
12.1.1 (Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-
12.1.1 (Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-
12.1.1 (Test for Breakaway starting current at rated voltage and frequency (Cl.12.1.1 & Cl. 12.5))	-
12.5.1 (Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-
12.5.1 (Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-
12.5.1 (Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-
12.5.1 (Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-
12.5.1 (Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-
12.5.1 (Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-
12.2 (Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-
12.2 (Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-
12.2 (Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-
12.7 (Insulation resistance test)	-
13.1 (High voltage test)	-
13.2 (Moisture proofness)	-
13.2 (Moisture proofness)	-
13.3 (Leakage current test)	-
15.1 (ADDITIONAL TESTS (For ECO - MARK))	-
15.2 (Specific Requirements)	-
16.1 (Marking and Diagram of connenctions)	-
16.1 (Marking and Diagram of connenctions)	-
16.1 (Marking and Diagram of connenctions)	-
16.1 (Marking and Diagram of connenctions)	-
16.1 (Marking and Diagram of connenctions)	-
9.4.11 (General construction (as per Cl. 9 & F-3))	-
12.6 (Vibration Severity)	-

-
Complete upto 180 Watt except Foot & Flange Mounted;

11255

BIS, Eastern Regional Laboratory (ERL)

None

IS 3589 (2001)

Steel pipes for water and sewage (168.3 To 2540 Mm Outside Diameter) - Specification (Third Revision)

All grades (see remarks)

Please see remarks. View breakup
Testing charges are Rs.11800/- (for SAW pipe), Rs.10380/- for (ERW Fe410, Fe450 & Fe330)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
8.1 Table 2 Table 3 (Carbon Content IS 228)	-
8.1 Table 2 Table 3 (Carbon Content IS 228)	-
8.1 Table 2 Table 3 (Carbon Content IS 228)	-
8.1 Table 2 Table 3 (Manganese Content IS 228)	-
8.1 Table 2 Table 3 (Manganese Content IS 228)	-
8.1 Table 2 Table 3 (Manganese Content IS 228)	-
8.1 Table 2 Table 3 (Phosphorus Content IS 228)	-
8.1 Table 2 Table 3 (Sulphur Content IS 228)	-
11.1, Table 5. (Outside Diameter (OD))	-
11.1, Table 5. (Thickness)	-
11.1, Table 5. (Mass)	-
12.3.3 (Ovality)	-
12.5 (Strightness)	-
14.1 (Visual inspection, Appearance and Workmanship)	-
9.2.3 (Flattening Test for seamless pipes)	-
9.2.1 (Flattening test for ERW pipes )	-
9.3 (Guided Bend Test (for SAW Pipes))	-
9.1 (Tensile test-Yield Strength)	-
9.1 (Tensile test-Strength)	-
9.1 (Tensile test- Elongation)	-
11.1, Table 5. (Mass)	-
"11.1, Table 5. 12.3.3" (Avarage Outer dia (04))	-
"11.1, Table 5. 12.3.3" (Avarage Thickness (08))	-
"11.1, Table 5. 12.3.3" (Maximum Ovality (08))	-

-
Mech-Facility not available for Hydraulic & Guided bend Test and OD above 273 mm, Chem- Facility not available for Al, Nb, V, Ti (given in notes under Table-2)

11256

BIS, Southern Regional Laboratory (SRL)

None

IS 9294 (1979)

Cold-Rolled Stainless Steel Strips for Razor Blades

1725/ View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.1 (Freedom from defects )	-
9.1 (Edge condition )	-
10.1 (Dimensions, mm )	-
10.2.1 (Camber -The transverse variation of thickness )	-
10.2.2 (Edge camber )	-
10.2.3 (Edge Ripple )	-
10.2.4 (Finish)	-

-
" 1.5 m Excluding except hardness test and chemical tests

11257

BIS, Central Laboratory (CL)

None

IS 12751 (1989)

Pesticides - Pendimethalin EC - Specification

Rs.5400/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2.1 (Description)	-
3.2.2 (Cold Test)	-
3.2.3 (Flash Point (Abel))	-
3.2.4 (Emulsion Stability)	-
3.3.1 (Pendimethalin content)	-
3.4 (Acidity/Alkalinity)	-

-
excluding Cl. 3.3.1 Pendimethalin Content;

11258

BIS, Central Laboratory (CL)

None

IS 299 (2012)

Alumino - Ferric - Specification (Fifth Revision)

Please see remarks View breakup
testing charges are Rs.3250.00 (for Grade 1, 2 & 3) and Rs.8250.00 (for Grade 4 & 5).

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
1 (i) Table 1 ( Insouble matter, Grade 1, A-3)	-
1 (i) Table 1 ( Insouble matter, Grade 2, A-3)	-
1 (i) Table 1 ( Insouble matter, Grade 3, A-3)	-
1 (i) Table 1 ( Insouble matter, Grade 4, A-3)	-
1 (i) Table 1 ( Insouble matter, Grade 5, A-3)	-
1 (ii) Table 1 (Soluble iron compound (as Fe2+ and Fe3+), Grade 1, A-4)	-
1 (ii) Table 1 (Soluble iron compound (as Fe2+ and Fe3+), Grade 2, A-4)	-
1 (ii) Table 1 (Soluble iron compound (as Fe2+ and Fe3+), Grade 3, A-4)	-
1 (ii) Table 1 (Soluble iron compound (as Fe2+ and Fe3+), Grade 4, A-4)	-
1 (ii) Table 1 (Soluble iron compound as Fe2+ and Fe3+), Grade 5, A-4)	-
1 (iii) Table 1 (Water soluble aluminium compounds (as Al2O3), Grade 1, A-5)	-
1 (iii) Table 1 (Water soluble aluminium compounds (as Al2O3), Grade 2, A-5)	-
1 (iii) Table 1 (Water soluble aluminium compounds (as Al2O3), Grade 3, A-5)	-
1 (iii) Table 1 (Water soluble aluminium compounds (as Al2O3), Grade 4, A-5)	-
1 (iii) Table 1 (Water soluble aluminium compounds (as Al2O3), Grade 5, A-5)	-
1 (iv) Table 1 (pH (of 5 percent aqueous solution), Grade 1, A-6)	-
1 (iv) Table 1 (pH (of 5 percent aqueous solution), Grade 2, A-6)	-
1 (iv) Table 1 (pH (of 5 percent aqueous solution), Grade 3, A-6)	-
1 (iv) Table 1 (pH (of 5 percent aqueous solution), Grade 4, A-6)	-
1 (iv) Table 1 (pH (of 5 percent aqueous solution), Grade 5, A-6)	-
1 (v) Table 1 (Free acidity (as H2SO4)/Basicity (as Al2O3), Grade 1, A-7)	-
1 (v) Table 1 (Free acidity (as H2SO4)/Basicity (as Al2O3), Grade 2, A-7)	-
1 (v) Table 1 (Free acidity (as H2SO4)/Basicity (as Al2O3), Grade 3, A-7)	-
1 (v) Table 1 (Free acidity (as H2SO4)/Basicity (as Al2O3), Grade 4, A-7)	-
1 (v) Table 1 (Free acidity (as H2SO4)/Basicity (as Al2O3), Grade 5, A-7)	-
1 (vi) Table 1 ( Lead (as Pb), Grade 1, A-8)	-
1 (vi) Table 1 ( Lead (as Pb), Grade 2, A-8)	-
1 (vi) Table 1 ( Lead (as Pb), Grade 3, A-8)	-
1 (vi) Table 1 ( Lead (as Pb), Grade 4, A-8)	-
1 (vi) Table 1 ( Lead (as Pb), Grade 5, A-8)	-
1 (vii) Table 1 (Arsenic (as As2O3), Grade 1, A-9)	-
1 (vii) Table 1 (Arsenic (as As2O3), Grade 2, A-9)	-
1 (vii) Table 1 (Arsenic (as As2O3), Grade 3, A-9)	-
1 (vii) Table 1 (Arsenic (as As2O3), Grade 4, A-9)	-
1 (vii) Table 1 (Arsenic (as As2O3), Grade 5, A-9)	-
1 (viii) Table 1 (Mercury (as Hg), Grade 1, A-10)	-
1 (viii) Table 1 (Mercury (as Hg), Grade 2, A-10)	-
1 (viii) Table 1 (Mercury (as Hg), Grade 3, A-10)	-
1 (viii) Table 1 (Mercury (as Hg), Grade 4, A-10)	-
1 (viii) Table 1 (Mercury (as Hg), Grade 5, A-10)	-
1 (ix) Table 1 (Manganese (as Mn), Grade 1, A-11)	-
1 (ix) Table 1 (Manganese (as Mn), Grade 2, A-11)	-
1 (ix) Table 1 (Manganese (as Mn), Grade 3, A-11)	-
1 (ix) Table 1 (Manganese (as Mn), Grade 4, A-11)	-
1 (ix) Table 1 (Manganese (as Mn), Grade 5, A-11)	-
1 (x) Table 1 (Chromium (as Cr), Grade 1, A-12)	-
1 (x) Table 1 (Chromium (as Cr), Grade 2, A-12)	-
1 (x) Table 1 (Chromium (as Cr), Grade 3, A-12)	-
1 (x) Table 1 (Chromium (as Cr), Grade 4, A-12)	-
1 (x) Table 1 (Chromium (as Cr), Grade 5, A-12)	-
1 (xi) Table 1 (Cadmium (as Cd), Grade 1, A-13)	-
1 (xi) Table 1 (Cadmium (as Cd), Grade 2, A-13)	-
1 (xi) Table 1 (Cadmium (as Cd), Grade 3, A-13)	-
1 (xi) Table 1 (Cadmium (as Cd), Grade 4, A-13)	-
1 (xi) Table 1 (Cadmium (as Cd), Grade 5, A-13)	-
1 (xii) Table 1 (Selenium (as Se), Grade 1, A-14)	-
1 (xii) Table 1 (Selenium (as Se), Grade 2, A-14)	-
1 (xii) Table 1 (Selenium (as Se), Grade 3, A-14)	-
1 (xii) Table 1 (Selenium (as Se), Grade 4, A-14)	-
1 (xii) Table 1 (Selenium (as Se), Grade 5, A-14)	-
1 (xiii) (a) Table 1 (Organic impurities:Phenolic compounds (as C6H5OH), Garde 1, A-15)	-
1 (xiii) (a) Table 1 (Organic impurities:Phenolic compounds (as C6H5OH), Garde 2, A-15)	-
1 (xiii) (a) Table 1 (Organic impurities:Phenolic compounds (as C6H5OH), Garde 3, A-15)	-
1 (xiii) (a) Table 1 (Organic impurities:Phenolic compounds (as C6H5OH), Garde 4, A-15)	-
1 (xiii) (a) Table 1 (Organic impurities:Phenolic compounds (as C6H5OH), Garde 5, A-15)	-
1 (xiii) (b) Table 1 (Anionic detergents (as MASS), Garde 1, A-16)	-
1 (xiii) (b) Table 1 (Anionic detergents (as MASS), Garde 2, A-16)	-
1 (xiii) (b) Table 1 (Anionic detergents (as MASS), Garde 4, A-16)	-
1 (xiii) (b) Table 1 (Anionic detergents (as MASS), Garde 5, A-16)	-
1 (xiii) (b) Table 1 (Anionic detergents (as MASS), Garde 3, A-16)	-

-
-

11259

BIS, Central Laboratory (CL)

None

IS 6006 (2014)

Uncoated stress relieved strand for prestressed concrete - Specification (Second Revision)

Rs 4035/- Excluding Proof Stress and Relaxation Test View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 5 (Weight)	-
Cl 7 (Tensile Test On UTM)	-
Cl 4 (Length )	-
Cl 4 (Joints)	-
Cl 4 (Butt Joint)	-
Cl 4.5 (Workmanship)	-
4.1.2 (sulphur)	-
4.1.2 (phosphorus)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm; excluding -; i)Fixture for tensile test(As per Annex C), Relaxation Test

11260

BIS, Central Laboratory (CL)

None

IS 6527 (1995)

Stainless steel wire rods - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 8 (Heat Treatment)	-
Cl 9 (Tensile & Hardness)	-
Cl 10 (Diameter & Out Of Round)	-
7, Table 1of IS:6527 (Designation X04Cr13) (Carbon)	-
7, Table 1of IS:6527 (Designation X04Cr13) (Sulphur)	-
7, Table 1of IS:6527 (Designation X04Cr13) (Phosphorous)	-
7, Table 1of IS:6527 (Designation X04Cr13) (Manganese)	-
7, Table 1of IS:6527 (Designation X04Cr13) (Silicon)	-
7, Table 1of IS:6527 (Designation X04Cr13) (Aluminium)	-
7, Table 1of IS:6527 (Designation X04Cr13) (Chromium)	-
7, Table 1of IS:6527 (Designation X04Cr13) (Nickel)	-
7, Table 1of IS:6527 (Designation X04Cr13) (Molybdenum)	-
7, Table 1of IS:6527 (Designation X04Cr13) (Copper)	-
7, Table 1of IS:6527 (Designation X02Cr18Ni11) (Niobium)	-
7, Table 1of IS:6527 (Designation X02Cr18Ni11) (Titanium)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm; excluding -; i)Extensometer (for Proof stress) ii)Hardness Test for size < 13mm not available

11261

BIS, Central Laboratory (CL)

None

IS 12016 (1987)

Specification for cypermethrin EC

Rs.2450.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2.2.1 (Description)	-
2.2.2 (Cold Test)	-
2.2.3 (Flash Point (Abel))	-
2.2.4 (Emulsion Stability)	-
2.3.1 (Cypermethrin content)	-
2.3.2 (Acidity)	-

-
excluding Cl 2.3.1 Cypermethrin Content;

11262

BIS, Southern Regional Laboratory (SRL)

None

IS 2556 : Part 15 (2004)

Vitreous sanitary appliances (Vitreous China) - Specification: Part 15 specific requirements of universal water closets

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 3 - General Requirements ( Ref. Cl.5.2 of IS 2556 (Part 1) : 1994) (Lead or a lead compound, Annex - A of IS 2556 (Part 1) : 1994))	-
Cl. 3 - General Requirements ( Ref. Cl.9.6 of IS 2556 (Part 1) : 1994) (Resistance to staining and burning, Annex - C of IS 2556 (Part 1) : 1994))	-
3 (General requirements-Application of Glazing-IS 2556 (Part 1))	-
3 (General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-General-Wavy finiah-IS 2556 (Part 1))	-
3 (General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-Visible surfaces other than above-Polishing mark -IS 2556 (Part 1))	-
3 (General requirements-Permissible blemishes or defects (Wash Basins, Laboratory sinks and drinking fountains)-General-Wavy finiah-IS 2556 (Part 1)))	-
3 (General requirements-Permissible blemishes or defects (Wash Basins, Laboratory sinks and drinking fountains)-Service space top of slab inside of bowl, front of fascis-Spots, blisters and pinholes-IS 2556 (Part 1)))	-
3 (General requirements-Permissible blemishes or defects (Wash Basins, Laboratory sinks and drinking fountains)-Face of intrnal, back and side-Spots, blisters and pinholes-IS 2556 (Part 1)))	-
3 (General requirements-Permissible blemishes or defects (Flushing cisterns, Auto cisterns and covers)-General-Warpage-IS 2556 (Part 1)))	-
3 (General requirements-Permissible blemishes or defects (Flushing cisterns, Auto cisterns and covers)-General-Dislocations-IS 2556 (Part 1)))	-
3 (General requirements-Permissible blemishes or defects (Flushing cisterns, Auto cisterns and covers)-Visual surface-wavy finish-IS 2556 (Part 1)))	-
3 (General requirements-Permissible blemishes or defects (Flushing cisterns, Auto cisterns and covers)-Visual surface-Spot, blisters and pinholes-IS 2556 (Part 1)))	-
3 (General requirements-Permissible blemishes or defects (Flushing cisterns, Auto cisterns and covers)-Visual surface-Bubbles and specks-IS 2556 (Part 1)))	-
3 (General requirements-Permissible blemishes or defects (Flushing cisterns, Auto cisterns and covers)-Visual surface-Polishing marks-IS 2556 (Part 1)))	-
3 (General requirements-Thickness IS 2556 (Part 1))	-
3 (General requirements-PERFORMANCE REQUIllEMENTS-WARPAGE IS 2556 (Part 1))	-
8.4 (FLUSHING TESTS-Water Holding Capacity )	-
8.5.1 (FLUSHING TESTS-Single Ball Test)	-
8.5.2 (FLUSHING TESTS-Fifty Ball Test)	-
8.6 (FLUSHING TESTS-Saw Dust Test)	-
8.7 (FLUSHING TESTS-Splash Test )	-
6.1 (CONSTRUCTION)	-
4 (SIZES)	-
5.1-table 1 (DIMENSIONS AND TOLERANCES-L)	-
5.1-table 1 (DIMENSIONS AND TOLERANCES-W)	-
5.1-table 1 (DIMENSIONS AND TOLERANCES-H)	-
5.1-table 1 (DIMENSIONS AND TOLERANCES-W1)	-
5.1-table 1 (DIMENSIONS AND TOLERANCES-L2)	-
5.1-table 1 (DIMENSIONS AND TOLERANCES-L1)	-
5.1-table 1 (DIMENSIONS AND TOLERANCES-L3)	-
5.1-table 1 (DIMENSIONS AND TOLERANCES-T)	-
5.1-table 1 (DIMENSIONS AND TOLERANCES-D)	-
5.1-Table 2 (DIMENSIONS AND TOLERANCES-Connecting Dimensions-h1)	-
5.1-Table 2 (DIMENSIONS AND TOLERANCES-Connecting Dimensions-h2)	-
5.1-Table 2 (DIMENSIONS AND TOLERANCES-Connecting Dimensions-h3)	-
5.1-Table 2 (DIMENSIONS AND TOLERANCES-Connecting Dimensions-d1)	-
5.1-Table 2 (DIMENSIONS AND TOLERANCES-Connecting Dimensions-d2)	-
5.1-Table 2 (DIMENSIONS AND TOLERANCES-Connecting Dimensions-d3)	-
5.1-Table 2 (DIMENSIONS AND TOLERANCES-Connecting Dimensions-A)	-
5.1-Table 2 (DIMENSIONS AND TOLERANCES-Connecting Dimensions-B)	-
5.1-Table 2 (DIMENSIONS AND TOLERANCES-Connecting Dimensions-d4)	-
5.1-Table 2 (DIMENSIONS AND TOLERANCES-Connecting Dimensions-d5/2)	-
5.1-Table 2 (DIMENSIONS AND TOLERANCES-Connecting Dimensions-n)	-
5.1-Table 2 (DIMENSIONS AND TOLERANCES-Connecting Dimensions-M)	-
6.1 (CONSTRUCTION-closet)	-
6.1 (CONSTRUCTION-closet)	-
6.3-Table 3 (CONSTRUCTION-Dimensions of Two Piece Bend-d1)	-
6.3-Table 3 (CONSTRUCTION-Dimensions of Two Piece Bend-d2)	-
6.3-Table 3 (CONSTRUCTION-Dimensions of Two Piece Bend-d6)	-
6.3-Table 3 (CONSTRUCTION-Dimensions of Two Piece Bend-f)	-
6.3-Table 3 (CONSTRUCTION-Dimensions of Two Piece Bend-h)	-
7 (FINISH)	-
8.2 (FLUSHING TESTS-Toilet Paper)	-
3 (General requirements-PERFORMANCE REQUIllEMENTS-CRAZING IS 2556 (Part 1))	-

-
2 NOS

11263

BIS, Bengaluru Branch Laboratory (BNBL)

None

IS 13428 (2005)

Packaged natural mineral water specification (Second Revision)

19200 View breakup
All except Radio Active Residues (RAR)- Rs 19200.00, All except Pesticide Residues (PRs) & RARs- Rs. 13900.00, All except Micro, PRs & RARs- Rs. 8750.00, Only Micro- Rs. 5900.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.2 Table-1 i (Colour)	-
6.2 Table-1 ii (Odour)	-
6.2 Table-1 iii (Taste)	-
6.2 Table-1 iv (Turbidity)	-
6.2 Table-1 v (Total dissolved solids)	-
6.2 Table-1 vi (pH)	-
6.2 Table-2 i (Nitrate (as NO3))	-
6.2 Table-2 ii (Nitrite (as NO2))	-
6.2 Table-2 iii (Sulphide (as H2S))	-
6.2 Table-2 iv (Manganese (as Mn))	-
6.2 Table-2 v (Copper (as Cu))	-
6.2 Table-2 vii (Flouride (as F))	-
6.2 Table-2 viii (Barium (as Ba))	-
6.2 Table-2 ix (Antimony (as Sb))	-
6.2 Table-2 x (Borates (as B))	-
6.2 Table-2 xi (Silver (as Ag))	-
6.2 Table-2 xii (Chloride (as Cl))	-
6.2 Table-2 xiii (Sulphate (as SO4),)	-
6.2 Table-2 xiv (Magnesium (as Mg))	-
6.2 Table-2 xv (Calcium (as Ca))	-
6.2 Table-2 xvi (Sodium (as Na))	-
6.2 Table-2 xvii (Alkalinity (as HCO3))	-
6.2 Table-2 xviii (Selenium (as Se))	-
6.2 Table-2 xix (Mineral Oil)	-
6.2 Table-3 i (Arsenic (as As))	-
6.2 Table-3 ii (Cadmium (as Cd))	-
6.2 Table-3 iv (Chromium (as Cr))	-
6.2 Table-3 vi (Lead (as Pb)	-
6.2 Table-3 vii (Nickel (as Ni))	-
6.2 Table-1 v (Total dissolved solids)	-
6.1.1 (Escherichia coli(or thermotolerant bacteria))	-
6.1.2 (Coliform , bacteria)	-
6.1.3 (Faecal Streptococci )	-
6.1.3 (Staphylococcus Aureus)	-
6.1.4 (Sulphite Reducing Anaerobes )	-
6.1.5 (Pseudomonas Aeruginosa )	-
6.1.6 (Yeast and Mould )	-
6.1.7 (Salmonella )	-
6.1.7 (Shigella)	-
6.1.8 (Vibrio cholera )	-
6.1.8 (Vibrio parahemolyticus)	-
Table 3, x) (Uranium)	-
6.2 Table-3 v (Mercury (as Hg))	-

-
Test facility not available for Cyanide, Anionic surface active agents, Phenolic compounds, Radiactive residues.

11264

BIS, Central Laboratory (CL)

None

IS 6003 (2010)

Indented Wire For--Prestressed Concrete ”

Rs.4110/- excl. relaxation test View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 5.1 (Diameter)	-
Cl 6.1.2 (Weight)	-
Cl 7.1 (Tensile Test On UTM)	-
Cl 7.2 (Tensile Test On UTM)	-
Cl 7.3 (Reverse Bend Test)	-
Cl 7.4 (Tensile Test On UTM)	-
4.1.1 (Phosphorus %)	-
4.1.1 (Sulphur %)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm; excluding -; i) Relaxation Test (As per CL 8.7)

11265

BIS, Central Laboratory (CL)

None

IS 11997 (1987)

Specification for fbnvaleratb AC

Rs 5150/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2.2.1 (Description)	-
2.2.2 (Cold Test)	-
2.2.3 (Flash Point (Abel))	-
2.2.4 (Emulsion Stability)	-
2.3.1 (Fenvelarte content)	-
2.3.2 (Acidity/Alkalinity)	-

-
-

11266

BIS, Central Laboratory (CL)

None

IS 1008 (2004)

Sugar boiled confectionery - Specification (Second Revision)

Rs 4500/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 (Description)	-
5.3 Table 1 i (Ash sulphated)	-
5.3 Table 1 ii (Acid Insoluble ash)	-
5.3 Table 1 iii (Sulphur dioxide)	-
5.3 Table 1 iv (Arsenic)	-
5.3 Table 1 v (Lead)	-
5.3 Table 1 vi (Copper)	-
5.3 Table 1 vii (Zinc)	-
5.3 Table 1 viii (Tin)	-
5.3 Table 2 i (Moisture.)	-
5.3 Table 2 ii (Ash sulphated)	-
5.3 Table 2 iii (Acid insoluble ash)	-
5.3 Table 2 iv (Sulphur dioxide)	-

-
500 gm x 3 excluding 1-Sulphur dioxide;

11267

BIS, Eastern Regional Laboratory (ERL)

None

IS 3431 (1982)

Specification for steel for the manufacture of volute helical and laminated springs for automotive suspension (Second Revision)

For all grades except tests mentioned in remarks

Rs 1800/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 2.1, 5.1 & Table 1 (Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 2.1, 5.1 & Table 1 (Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 2.1, 5.1 & Table 1 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 2.1, 5.1 & Table 1 (Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 2.1, 5.1 & Table 1 (Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 2.1, 5.1 & Table 1 (Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
8,Table 4 (Mechanical properties - IS 3431)	-
10 (Freedom from defects)	-
12 (Straightness)	-
13, Table 5&Table 6 (Dimensions and Tolerance)	-
11 (Surface Decarburisation)	-
9, Table 2 (Cold Shearability)	-

-
Chem- except V. Grade designation and treatment condition to be declared.

11268

BIS, Central Laboratory (CL)

None

IS 15997 (2012)

Low nickel austenitic stainless steel sheet and strip for utensils and kitchen appliances - Specification

Rs 2850 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6 (Freedom From Defects)	-
9.3 (Tensile Test-1608:Part 1)	-
9.3, Table 3 (Yield Strength, Mpa)	-
9.3, Table 3 (Elongation, %)	-
11 (Surface finish)	-
12 (Dimensions)	-
14.1 (Thickness,mm)	-
14.2 ( Width, mm)	-
14.3 (Length, mm)	-
14.4 (Flatness, mm)	-
14.5 (Camber, mm)	-
Cl. 8.1, 8.1.1 & 10.1 Table 1 (Carbon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 8.1, 8.1.1 & 10.1 Table 1 (Silicon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 8.1, 8.1.1 & 10.1 Table 1 (Manganese -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 8.1, 8.1.1 & 10.1 Table 1 (Nickel -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 8.1, 8.1.1 & 10.1 Table 1 (Chromium -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 8.1, 8.1.1 & 10.1 Table 1 (Sulphur -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 8.1, 8.1.1 & 10.1 Table 1 (Phosphorus -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 8.1, 8.1.1 & 10.1 Table 1 (Copper -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 8.1, 8.1.1 & 10.1 Table 1 (Nitrogen -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm; excluding -; Proof stress test (Cl 9.3)

11269

BIS, Eastern Regional Laboratory (ERL)

None

IS 2508 (2016)

Polyethylene films and sheets - Specification (Third Revision)

For all types except tests mentioned in remarks

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1.6a (Carbon Black Content, Annex-A)	-
5.1.6b (Ash Content, Annex-A)	-
5.1.6c (Carbon Black Dispersion, Cl.16 of IS 2530)	-
5.1.2 (Film Form)	-
5.1.3 (Odour)	-
5.1.5 (Melt Flow Index. Cl 6, 7 of IS 13360(Part-4/Section-1))	-
5.2.2 (Tolerance on Thickness, Annex-A)	-

-
Facility not available for Dirt impact, puncture test , tear resistance, density and tensile properties

11270

BIS, Southern Regional Laboratory (SRL)

None

IS 204 : Part 1 (1991)

Tower bolts - Specification: Part 1 ferrous metals (Fifth Revision)

Rs.2100.00. View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 (General)	-
5.2.1 Table 1 (Particulars-Barrel Tower Bolts)	-
5.2.2 Table 2 (Particulars-Sami Barrel Tower Bolts)	-
5.2.3 Table 3 (Particulars-Riveted or Spot Welded Tower Bolts)	-
5.2.4 Table 4 (Particulars-Skeleton Tower Bolts)	-
6.1- Table 1 (Dimension of Barrel tower bolts-Minimum No. of equally Spaced Screw holes in Barrel and Socket for wood screw no 6)	-
6.2- Table 2 (Dimension of Sami Barrel Tower Bolts-Minimum No. of equally Spaced Screw holes in Bolt Plate and Socket for wood screw no 6)	-
6.3- Table 3 (Dimension of Riveted or Spot Welded Tower Bolts-Minimum No. of equally Spaced Screw holes in Bolt Plate and Socket for wood screw no 6)	-
6.4- Table 4 (Dimension of Skeleton Tower Bolts- Nos of Staples)	-
6.4- Table 4 (Dimension of Skeleton Tower Bolts-Minimum No. of Screw holes for wood screw no 6)	-
8.1 (MARKING- .)	-
9 (PACKING)	-
6.1- Table 1 (Dimension of Barrel tower bolts-1.Size 2.Length of Bolt-A 3.Length of Barrel-B 4.Width of Barrel-C 5.Dia of Bolt-D 6.Length of Socket-E 7.Thickness of mild steel sheet for barrel-F 8.Dia of bore of barrel or socket- G )	-
6.2- Table 2 (Dimension of Sami Barrel Tower Bolts 1.Size 2.Length of Bolt-A 3.Length of Bolt Plate-B 4.Width of Bolt Plate-C 5.Dia of Bolt-D 6.Length of Socket-E 7.Thickness of Bolt Plate or Socket-F 8.Dia of bore of Bolt Plate or socket G )	-
6.3- Table 3 (Dimension of Riveted or Spot Welded Tower Bolts- 1.Size 2.Length of Bolt-A 3.Length of Bolt Plate-B 4.Width of Bolt Plate-C 5.Dia of Bolt-D 6.Length of Socket-E 7. Length of Strap-E" 8.Thickness of Back Plate -F 9.Thickness of Socket or Upper Plate and Strap- F" 10.Dia of bore of Bolt Plate or socket- G 11. Length of Alternative Socket-H )	-
6.4- Table 4 (Dimension of Skeleton Tower Bolts 1.Size 2.Length of Bolt-A 3.Length of Bolt Plate-B 4.Width of Bolt Plate-C 5.Dia of Bolt-D 6.Length of Staple-E 7.Thickness of Plate or Staple -F 8.Dia of bore of Plate or Staple-G 9.Dia of shank of Knob-J)	-

-
" 3x2 pcs . Excluding Excl chemical tests

11271

BIS, Eastern Regional Laboratory (ERL)

None

IS 814 (2004)

Covered electrodes for manual metal arc welding of carbon and carbon manganese steel - Specification (Sixth Revision)

Rs. 17500/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.1.1 (Diameter of Core Wire)	-
7.1.2 (Length of Electrodes)	-
7.2.1 (Contact End)	-
7.2.2 (Arc striking End)	-
7.3 (Concentricity of Flux covering with core wire)	-
7.4 (Defects of Core wire and Coverings)	-
6 & 8.2 (Carbon- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-
6 & 8.2 (Manganese- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-
6 & 8.2 (Phosphorous- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-
6 & 8.2 (Sulphur- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-
6 & 8.2 (Copper- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-
6 & 8.2 (Alumiminium- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-
6 & 8.2 (Titanium- Relevant Parts of IS 228 or any other established instrumental/chemical method)	-
CL 7.1.1 (Average length of electrodes (10))	-
CL 7.2.1 (Average length of Contact End (10))	-
CL 7.2.2 (Average length of arc striking end (10))	-

-
Facility available Only for dimension, tensile, impact and bend(if Prepared Piece supplied), Chem- Facility not available for Si, Ti, V & Al for core wire and V for weld metal, Designation/Classification reqd (Declaration for Parameters, where applicable) Prepared sample to be sent for tensile and impact.

11272

BIS, Eastern Regional Laboratory (ERL)

None

IS 2507 (1975)

Specification for cold - rolled steel strips for springs (First Revision)

All Grade, Designation and Sizes (except where V is required)

Rs .6000/- Gr 1 to Gr 9 View breakup
Rs.3900/- for Gr.10, Rs.4500/- for Gr.11.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 0.2, 4.1, 6.1, 6.2 & Table1 (Carbon- Appropriate parts of IS 228.)	-
Cl. 0.2, 4.1, 6.1, 6.2 & Table1 (Silicon- Appropriate parts of IS 228.)	-
Cl. 0.2, 4.1, 6.1, 6.2 & Table1 (Manganese- Appropriate parts of IS 228.)	-
Cl. 0.2, 4.1, 6.1, 6.2 & Table1 (Sulphur- Appropriate parts of IS 228.)	-
Cl. 0.2, 4.1, 6.1, 6.2 & Table1 (Phosphorus- Appropriate parts of IS 228.)	-
Cl. 0.2, 4.1, 6.1, 6.2 & Table1 (Chromium- Appropriate parts of IS 228.)	-
5 (FREEDOM FROM DEFECTS)	-
7 (Rolling Tolerances)	-
10 (Physical properties(optional))	-
12 (Surface condition)	-

-
Chem: Facility not available for V. Grade, Steel designation, edge condition to be declared.

11273

BIS, Bengaluru Branch Laboratory (BNBL)

None

IS 13422 (1992)

Disposable surgical rubber gloves specification

Rs.6900.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.4 (Sterility)	-
5.2.1 (General Characteristics and Dimensions)	-
5.2.2 and Table 1 Fig. 1 (Dimensions - Length)	-
5.2.2 and Table 1 Fig. 1 (Dimensions - Width)	-
5.2.2 and Table 1 Fig. 1 (Dimensions - Thickness of Finger)	-
5.2.2 and Table 1 Fig. 1 (Dimensions - Thickness of Palm)	-
5.2.2 and Table 1 Fig. 1 (Dimensions - Thickness of Cuff)	-
5.3 and Table 2 ( Tensile Strength Before Ageing)	-
5.3 and Table 2 ( Elongation at Break Before Ageing)	-
5.3 and Table 2 (Stress at 500% Elongation at Break Before Ageing)	-
5.3 and Table 2 ( Tensile StrengthAfter Accelerated Ageing)	-
5.3 and Table 2 ( Elongation at Break After Accelerated Ageing)	-
5.5 (Airtight Test)	-

-
-

11274

BIS, Bengaluru Branch Laboratory (BNBL)

None

IS 7181 (1986)

Specification for horizontally cast iron double flanged pipes for water, gas and sewage (First Revision)

Rs.6600/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2 (Manufacture)	-
3.3 (Manufacture)	-
6.1 (Hydrostatic Test)	-
7.1 (Sizes and Mass)	-
7.2 (Sizes and Mass)	-
7.3 (Sizes and Mass)	-
7.3 (Sizes and Mass)	-
7.3 (Sizes and Mass)	-
7.4 (Sizes and Mass Dimensions of Flange)	-
7.4 (Sizes and Mass Dimensions of Flange)	-
7.4 (Sizes and Mass Dimensions of Flange)	-
7.4 (Sizes and Mass Dimensions of Flange)	-
7.4 (Sizes and Mass Dimensions of Flange)	-
7.4 (Sizes and Mass Dimensions of Flange)	-
8.5 (Permissible Deviation from a Straight Line)	-
9 (Coating)	-

-
-

11275

BIS, Bengaluru Branch Laboratory (BNBL)

None

IS 5514 (1996)

Specification Apparatus Used in `Le-chatelier' Test

s.1200.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2 (CONSTRUCTION-Thickness)	-
2 (CONSTRUCTION-Internal Dia.)	-
2 (CONSTRUCTION-Height)	-
2 (CONSTRUCTION)	-
2 (CONSTRUCTION-Distance between ended)	-
2 (CONSTRUCTION-cover plate Weight)	-
3-Table 1 (DIMENSIONS-Outer side of the mould to the end of the indicator)	-
3-Table 1 (DIMENSIONS-Internal diameter of the mould)	-
3-Table 1 (DIMENSIONS-wall thickness of the mould)	-
3-Table 1 (DIMENSIONS-wall thickness of the mould)	-
3-Table 1 (DIMENSIONS-Split)	-

-
-

11276

BIS, Eastern Regional Laboratory (ERL)

None

IS 7887 (1992)

Mild steel wire rod for general engineering purposes - Specification (First Revision)

All grades

Rs.7200/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 9 (Nominal Diameter & Out Of Shape)	-
Cl 9 (Nominal Diameter & Out Of Shape)	-
Cl 8 (Workmanship)	-
6.1 (Carbon %)	-
6.1 (Manganese %)	-
6.1 (Phosphorus %)	-
6.1 (Sulphur %)	-
6.1 (Silicon %)	-
Cl 8 (Freedom from defects)	-
Cl 9 (Avarage Outer dia (08))	-

-
Chem- Facility not available for Al (when Al killed). Remarks: To indicate the type of 'Killed' material.

11277

BIS, Northern Regional Laboratory (NRL)

None

IS 3419 (1988)

Specification for fittings for rigid non - Metallic (Second Revision)

2700.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
8 & 5 (Visual Examination -IS:3419)	-
6.2 & 9.1- Table-1, ii (Inside Diameter of Collar for Slip type cuplers -IS:3419)	-
6.2 & 9.1- Table-1, iii (Inside Diameter of Ridge for Slip type cuplers -IS:3419)	-
6.2 & 9.1- Table-1, iv (Minimum overall length for Slip type cuplers -IS:3419)	-
6.2 & 9.1- Table-1, v (Minimum wall thickness for Slip type cuplers -IS:3419)	-
6.2 & 9.1- Table-2, ii (Inside Diameter of Collar for Socketed type cuplers -IS:3419)	-
6.2 & 9.1- Table-2, iii (Inside Diameter of Ridge for Socketed type cuplers -IS:3419)	-
6.2 & 9.1- Table-2, iv (Minimum overall length (a) for Socketed type cuplers -IS:3419)	-
6.2 & 9.1- Table-2, v (Minimum overall length (l) for Socketed type cuplers -IS:3419)	-
6.2 & 9.1- Table-2, vi (Minimum wall thickness for Socketed type cuplers -IS:3419)	-
6.2 & 9.1- Table-3, ii (Inside Diameter of Collar(d6) for Clamp type cuplers -IS:3419)	-
6.2 & 9.1- Table-3, iii (Inside Diameter of Collar (d5) for Clamp type cuplers -IS:3419)	-
6.2 & 9.1- Table-3, iv (Inside Diameter of Ridge for Clamp type cuplers -IS:3419)	-
6.2 & 9.1- Table-3, iv (Minimum length for Clamp type cuplers -IS:3419)	-
6.2 & 9.1- Table-3, vi (Minimum wall thickness for Clamp type cuplers -IS:3419)	-
6.2 & 9.1- Table-4, ii (Outside Dameter of Normal type bend -IS:3419)	-
6.2 & 9.1- Table-4, iii (Minimum Inside Diameter of Normal Type Bend -IS:3419)	-
6.2 & 9.1- Table-4, v (Length (l1) of Normal Type Bend -IS:3419)	-
6.2 & 9.1- Table-5, ii (Outside Dameter of Slip type cupling bend -IS:3419)	-
6.2 & 9.1- Table-5, iii (Minimum Inside Diameter of Slip type cupling bend -IS:3419)	-
6.2 & 9.1- Table-5, iv (Inside Diameter of collar for Slip type cupling bend -IS:3419)	-
6.2 & 9.1- Table-5, v (R- for Slip type cupling bend -IS:3419)	-
6.2 & 9.1- Table-5, vi (Y- for Slip type cupling bend -IS:3419)	-
6.2 & 9.1- Table-5, vii (l2- for Slip type cupling bend -IS:3419)	-
6.2 & 9.1- Table-6, ii (Inside Diameter of collar for Normal type Elbows -IS:3419)	-
6.2 & 9.1- Table-6, iii (Length (l) of Normal Type Elbows -IS:3419)	-
6.2 & 9.1- Table-6, iv (Radious(r) of Normal Type Elbows -IS:3419)	-
6.2 & 9.1- Table-6, v (Minimum wall thicknes of Elbows -IS:3419)	-
6.2 & 9.1- Table-7, ii (Inside Diameter of Collear for Normal type Tees -IS:3419)	-
6.2 & 9.1- Table-7, iii (Length (l) of Normal type Tees -IS:3419)	-
6.2 & 9.1- Table-7, iv (Radious(r) of Normal type Tees -IS:3419)	-
6.2 & 9.1- Table-7, v ( Minimum wall thicknes of Normal type Tees -IS:3419)	-
6.2 & 9.1- Table-8, ii (Inside Diameter of Collear for socketed type Tees - IS:3419)	-
6.2 & 9.1- Table-8, iii (a - of socketed type Tees -IS:3419)	-
6.2 & 9.1- Table-8, iv (l - of socketed type Tees -IS:3419)	-
6.2 & 9.1- Table-8, v (Minimum wall thicknes of socketed type Tees -IS:3419)	-
6.2 & 9.1- Table-9, ii (B - of spout Type Circular Boxes -IS:3419)	-
6.2 & 9.1- Table-9, iii (C - of spout Type Circular Boxes -IS:3419)	-
6.2 & 9.1- Table-9, iv (D - of spout Type Circular Boxes -IS:3419)	-
6.2 & 9.1- Table-9, v (E - of spout Type Circular Boxes -IS:3419)	-
6.2 & 9.1- Table-9, vi (F(Max) - of spout Type Circular Boxes -IS:3419)	-
6.2 & 9.1- Table-9, vii (F(Min) - of spout Type Circular Boxes -IS:3419)	-
6.2 & 9.1- Table-9, viii (G - of spout Type Circular Boxes -IS:3419)	-
6.2 & 9.1- Table-9, ix (t - of spout Type Circular Boxes -IS:3419)	-
10 (Resistance to Heat -IS:3419)	-
11 (Resistance to Burning - IS 3419)	-
12 (Moisture Absorption - IS 3419)	-
14.1 (Copper Test - IS 3419)	-
15, 15.3 (Resistance to Oil - IS 3419)	-
15,15.4 (Resistance to Oil - IS 3419)	-
16- Appendix-A (Resistance to Impact -IS 3419)	-
17.2 (Electric Strength - IS 3419)	-
17.3 (Insulation Resistance - IS 3419)	-

-
"Test facility is complete "

11278

BIS, Northern Regional Laboratory (NRL)

None

IS 12146 (1987)

Specification for carbon manganese steel forgings for pressure vessels

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1, Table 3 (Tensile Test-1608:Part 1)	-
6.1, Table 3 (Yield Strength, Mpa)	-
6.1, Table 3 (Elongation, %)	-
7 (Workmanship & Finish)	-
8 (Freedom from defects)	-
6.1, Table 3 (Reduction in area, Percent)	-
Cl. 5.1 & Table 1 (Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl 5.2 (Sulphur- IS 228(Part 9))	-
Cl. 5.1 & Table 1 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5.1 & Table 1 (Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5.1 & Table 1 (Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-

-
"Test facility is complete "

11279

BIS, Central Laboratory (CL)

None

IS 3055 : Part 2 (2004)

Clinical thermometers: Part 2 enclosed scale type - Specification (Third Revision)

Rs. 5400.00/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.2.3 (The thermometric liquid shall be pure, dry mercury)	-
5.1 (TEMPERATURE SCALE)	-
5.2 (TEMPERATURE SCALE)	-
7.1 (Patterns)	-
7.3.1 (Sheath )	-
7.3.1.1 (Sheath )	-
7.3.2 (Maximum Indicating Device (Constriction))	-
7.3.2.1 (Hardness of Maximum Indicating Device)	-
7.3.3 (Bulb)	-
7.3.4 (Strip Bearing the Scale)	-
7.3.5 (Constrution)	-
7.3.6 (Constrution)	-
7.4 - Table 1-i (Scale range)	-
7.4 - Table 1-ii (Scale range)	-
7.4 - Table 1-iii (Smallest scale division)	-
7.4 - Table 1-iv (Smallest scale division)	-
7.4 - Table 1-v (Overall length)	-
7.4 - Table 1-vi (Scale length)	-
7.4 - Table 1-vii (Extcn1aI diameter of sheath (round or Oval) )	-
7.4 - Table 1-viii (Bulb length)	-
7.4 - Table 1-ix (Distance from top of the constriction to the 35.5°C mark)	-
7.4 - Table 1-x (Distance from the highest graduation line to top of the sheath)	-
7.4 - Table 1-xi (Scale spacing)	-
7.4 - Table 1-xii (Thickness of stem)	-
7.5.1 (Graduation and Numbering)	-
7.5.2 (Graduation and Numbering)	-
7.5.3 (Graduation and Numbering)	-
7.5.4-a (Graduation and Numbering)	-
7.5.4-b (Graduation and Numbering)	-
7.5.4-c (Graduation and Numbering)	-
7.5.5 (Graduation and Numbering)	-
7.5.6 (Graduation and Numbering)	-
7.5.7 (Graduation and Numbering)	-
7.5.8 (Graduation and Numbering)	-
8.1 (Appearance)	-
8.2 (Ageing and Accuracy- Ref IS 6274 : 1971)	-
8.3-a (lnfluence of Immersion Time)	-
8.3-b (lnfluence of Immersion Time)	-

-
-

11280

BIS, Northern Regional Laboratory (NRL)

None

IS 9537 : Part 3 (1983)

Specification for conduits for electrical installations: Part 3 rigid plain conduits of insulating meterials

Rs. 3300.00/, Rs. 2850.00/ View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1 (Marking)	-
6.2 (Durability of Marking as per 6.4 of IS: 9537 (Part 1)-1980)	-
6.3 (Standard Mark on Conduit)	-
7.1.1 (Maximum and minimum outside diameter of socket)	-
7.1.1 Table-2 (Length of Socket end)	-
7.1.1 (Maximum and minimum outside diameter of socket)	-
7.1.1 Table-2 (Length of Socket end)	-
7.1.2 (Maximum and minimum outside diameter of conduit)	-
7.2 (Minimum inside diameter of conduit)	-
7.3 (Length of conduit)	-
7.4 (Unifomity of The wall Thickness)	-
8.1 (Construction as per clause 8 of IS: 9537 (Part 1)-1980)	-
9.2 (Bending Test i) At Room Temp ii) At Low Temp (-5 ±2°C))	-
9.3 (Compression Test as per caluse 9.3 of IS: 9537 (Part 1)-1980)	-
9.4 (Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-
9.5 (Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-
9.3 (Compression Test as per caluse 9.3 of IS: 9537 (Part 1)-1980)	-
9.5 (Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-
10 (Resistance to Heat -Ball presure test)	-
11 (Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-
12 (Electrical Characteristics-Test for electric strength as per clause 12.1.1 of IS: 9537 (Part 1)-1980)	-
12 (Electrical Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-

-
"Test facility is complete "

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number