| 11221 |
MATERIAL TESTING LABORATORY LLP
| 8176306
| IS 4759 (1996) |
Hot - Dip zinc coatings on structural steel and other allied products - Specification (Third Revision) |
All grades |
4000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6.1 Table 1, 9.2, 9.2.1 ,9.2.2(Msaa of Zinc Coating - IS 4759
IS 6745
IS 3203
IS 6012 ) |
- |
1500 |
|
- |
| 9.3(Uniformity of Zinc Coating - IS 4759
IS 2633
) |
- |
500 |
|
- |
| 9.4(Adhesion of Galvanizing coating - IS 2629 ) |
- |
500 |
|
- |
| 6.2 & 6.4(Freedom from Defects - IS 4759) |
- |
500 |
|
- |
| 4.1 & Table-1 of IS 209/IS 13229(Zinc -IS 2600) |
- |
500 |
|
Raw Material Zinc testing Charge-4000/- |
| 4.1 & Table-1 of IS 209/IS 13229(Lead -IS 2600) |
- |
500 |
|
- |
| 4.1 & Table-1 of IS 209/IS 13229(Cadmium -IS 2600) |
- |
500 |
|
- |
| 4.1 & Table-1 of IS 209/IS 13229(Iron -IS 2600) |
- |
500 |
|
- |
| 4.1 & Table-1 of IS 209/IS 13229(Tin -IS 2600) |
- |
500 |
|
- |
| 4.1 & Table-1 of IS 209/IS 13229(Copper -IS 2600) |
- |
500 |
|
- |
| 4.1 & Table-1 of IS 209/IS 13229(Thallium -IS 2600) |
- |
500 |
|
- |
| 4.1 & Table-1 of IS 209/IS 13229(Indium -IS 2600) |
- |
500 |
|
- |
| 4.1 & Table-1 of IS 209/IS 13229(Total Impurities -IS 2600) |
- |
0 |
|
- |
| 10(Marking) |
- |
250 |
|
- |
| 6.3(Steel Embrittlement -IS:6158-1984) |
- |
750 |
|
- |
|
18 Feb, 2027 |
-
- |
| 11222 |
MATERIAL TESTING LABORATORY LLP
| 8176306
| IS 1264 (1997) |
Brass gravity die castings - Specification (Fourth Revision) |
All grades |
2150 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.0(Freedom from defects) |
- |
100 |
|
- |
| 6.0(Shape) |
- |
100 |
|
- |
| 7.0(Cu) |
- |
200 |
|
- |
| 7.0(Sn) |
- |
200 |
|
- |
| 7.0(Pb) |
- |
200 |
|
- |
| 7.0(Ni) |
- |
200 |
|
- |
| 7.0(Fe) |
- |
200 |
|
- |
| 7.0(Al) |
- |
200 |
|
- |
| 7.0(Mn) |
- |
200 |
|
- |
| 7.0(Si) |
- |
200 |
|
- |
| 7.0(Total impurities excluding Ni Pb Al Zn) |
- |
200 |
|
- |
| 9.0(Pressure test) |
- |
250 |
|
- |
| 11(Marking) |
- |
100 |
|
- |
| 6.0(Size) |
- |
100 |
|
- |
| 6.0(Mass) |
- |
100 |
|
- |
|
18 Feb, 2027 |
-
- |
| 11223 |
MATERIAL TESTING LABORATORY LLP
| 8176306
| IS 407 (1981) |
Specification for brass tubes for general purposes (Third Revision) |
All Grades |
10000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6/6.1(FREEDOM FROM DEFECTS) |
- |
250 |
|
- |
| 7/7.1 & 7.1.1(CONDITION) |
- |
250 |
|
- |
| 8/8.1 & 8.2(SIZES AND TOLERANCES-Mean Outside Dia) |
- |
250 |
|
- |
| 8/8.1 & 8.2(SIZES AND TOLERANCES-Mean Wall thickness) |
- |
250 |
|
- |
| 8/8.1 & 8.2(SIZES AND TOLERANCES-Length) |
- |
250 |
|
- |
| 9/9.1/Appendix A(PRESSURE TESTS-Hydraulic Test) |
- |
1000 |
|
- |
| 9/9.2(PRESSURE TESTS-Pneumatic Test) |
- |
1000 |
|
- |
| 10/10.1-Table 2(PHYSICAL TEST- Hardness (HV)-IS : 1501 (Part 1)) |
- |
500 |
|
- |
| 10/10.2-Table 2(PHYSICAL TEST- Tensilt Test - IS : 2655) |
- |
500 |
|
- |
| 10/10.3(PHYSICAL TEST- Drifting Test- (For tubes upto and Including 100 mm nom OD)) |
- |
1000 |
|
- |
| 10/10.4 (10.4.1)("PHYSICAL TEST-Flattening Test (For Tubes ≤ 2.5 mm Wall Thickness and
not Exceeding 100 mm Outside Diameter)") |
- |
500 |
|
- |
| 10/10.4 (10.4.2)(PHYSICAL TEST-Flattening Test (For Tubes ≥ 2.5 mm Wall Thickness and More Than 100 mm Outside Diameter)) |
- |
500 |
|
- |
| 10/10.5(PHYSICAL TEST- Double Bend TestDouble Bend Test ( For Round Tubes ≤ 2.5 mm Wall Thickness and Over 100 mm Outside Diameter )) |
- |
500 |
|
- |
| 10/10.6(PHYSICAL TEST- Mercurous Nitrate Test- IS : 2305) |
- |
1500 |
|
- |
| 11/11.1(MARKING) |
- |
250 |
|
- |
| 5(Chemical Composition - IS 3685) |
- |
3000 |
|
- |
|
18 Feb, 2027 |
-
Scope Restricted to Tubes of wall thickness upto 10 mm |
| 11224 |
CIPET: CENTRE FOR SKILLING AND TECHNICAL SUPPORT (CSTS) - (CIPET), AURANGABAD
| 7123534
| IS 17425 (2020) |
Irrigation Equipment - Quick Coupled Polyethylene Pipes and Fittings for Sprinkler Irrigation Systems - Specification |
- |
65550 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5(Dimensions of pipe - i) Outside diameter) |
- |
250 |
|
- |
| 5(Dimensions of pipe - ii) Wall thickness minimum) |
- |
250 |
|
- |
| 6(Visual Appearance) |
- |
300 |
|
- |
| 7.1(Hydraulic Characteristics - Quality test) |
- |
4800 |
|
- |
| 7.1(Hydraulic Characteristics - Acceptance test) |
- |
1600 |
|
- |
| 7.2(Reversion Test) |
- |
1000 |
|
700+300 |
| 7.3(Tensile Test- i) Tensile Strength) |
- |
1350 |
|
1100+250 |
| 7.3(Tensile Test - ii)Elongation at Break) |
- |
0 |
|
- |
| 7.4(Fusion Compatibility Test- a) Quality test) |
- |
4800 |
|
- |
| 7.4(Fusion Compatibility Test- b) Acceptance test) |
- |
1600 |
|
- |
| 7.5(Density) |
- |
500 |
|
- |
| 7.6(Melt Flow Rate) |
- |
1100 |
|
- |
| 4.2(Carbon black- a)carbon content) |
- |
925 |
|
- |
| 4.2(Carbon black- b) Dispersion of carbon black) |
- |
700 |
|
- |
| 7.4 Table-2(Fusion Compatibility Test) |
- |
4800 |
|
- |
| 6.1(VISUAL APPEARANCE) |
- |
300 |
|
- |
| 5.1.2(Ovality) |
- |
250 |
|
- |
| 4.1.2(The MFR of the material shall be between 0.2 to 1.1 (both inclusive) when tested at 190 T at a nominal load of 50 N by the method prescribed in 7 of IS 2530. The MFR of the material shall also be within 20% of the value declared by the manufacturer.’) |
- |
1100 |
|
- |
| 4.1.1(density shall be between 940.4 kg/m’ and 958.4 kg/m3 (both inclusive) when determined at 27°C according to procedure prescribed in Annex A of IS 7328. The value of the density shall also not differ from the nominal value by more than 3 kg/m2 as per 5.2.1.1 of IS 7328.) |
- |
500 |
|
- |
| Cl. 4.2 , IS 2530-1963, Cl. 10(Cabon Black Content) |
- |
925 |
|
- |
| 4.1.3(Workmanship and appearance) |
- |
300 |
|
- |
| 4.1.4(Holding attachments for coupler parts) |
- |
850 |
|
- |
| 6.1.3(Weldability Test- a) Quality test) |
- |
4800 |
|
- |
| 6.1.3(Weldability Test- b) Acceptance test) |
- |
1600 |
|
- |
| 4.1 (a)(Quick Coupled Male and Female Couplers) |
- |
500 |
|
- |
| 4.1 (b)(HDPE couplers —) |
- |
2200 |
|
- |
| 6.1.1, 6.1.1.1(Leakage Test) |
- |
850 |
|
- |
| 6.1.2, 6.1.2.1(Hydraulic Proof Test) |
- |
850 |
|
- |
|
31 Dec, 2026 |
-
- |
| 11225 |
CIPET: CENTRE FOR SKILLING AND TECHNICAL SUPPORT (CSTS) - (CIPET), AURANGABAD
| 7123534
| IS 16098 Part 2 (2013) |
Structured-Wall Plastics Piping Systems for Non-Pressure Drainage and Sewerage Part 2 Pipes and Fittings with Non-Smooth External Surface, Type B |
- |
99000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 8.1.1 Table-10 (i)(Ring Stiffness) |
- |
1100 |
|
- |
| Table -1 Cl. No. 5.1, i)(Base Density) |
- |
500 |
|
- |
| Table -1 Cl. No. 5.1, ii)(Melt Flow Rate (MFR) at (190ºC, 5kg load)) |
- |
1100 |
|
- |
| Table -1 Cl. No. 5.1, iii)(Thermal Stability (Oxidation Induction Test, OIT) at 200ºC) |
- |
2200 |
|
- |
| 8.1.1 Table-10 (ii)(Impact Strength at (0±1 ºC)) |
- |
1100 |
|
- |
| " 5.1 Table-2 ", i)(Resistance to Internal Pressure 165hrs) |
- |
4800 |
|
- |
| " 5.1 Table-2 ", ii)(Resistance to Internal Pressure 1000hrs) |
- |
11000 |
|
- |
| 8.1.1, 8.1.2 Table-10 (iii)(Ring flexibility 30% of dem) |
- |
1100 |
|
- |
| 6.3.1 & Table-5(Dim (min.)
E4 (min)
E5 (min.)
Socket Length) |
- |
500 |
|
- |
| 6.3.2(Length of Pipe) |
- |
250 |
|
- |
| 8.1.1 Table-10 (iv)(Creep ratio) |
- |
26300 |
|
25200+1100 |
| 6.3.3(Out Side Diameter) |
- |
250 |
|
- |
| 6.3.5.1.1(Ring Stiffness of Spigot + socket) |
- |
1100 |
|
- |
| "6.3.5.1.5 Table-5 "(Socket thickness Avg. (min.) Avg.) |
- |
250 |
|
- |
| 9 Table-12 (i)(Tightness of elastomeric ring seal Joint) |
- |
1000 |
|
- |
| 6.3.5.2(Wall Thickness(e4 min)) |
- |
250 |
|
- |
| 9 Table 12 (ii)(Water tightness) |
- |
1000 |
|
- |
| 6.3.5.2("Construction Height of body wall(ec)
Wall Thickness (emin)
") |
- |
250 |
|
- |
| 9 Table- 12 (iii)(Resistance to combined temperature cycling and external loading) |
- |
39000 |
|
- |
| 7.1(Appearance) |
- |
300 |
|
- |
| 7.1.1(Color of Finished Pipes) |
- |
300 |
|
- |
| 7.2 Table-6 (i)(Resistance to Heating oven test at (110±2ºC for 30 minute)) |
- |
1100 |
|
- |
|
31 Dec, 2026 |
-
- |
| 11226 |
CIPET: CENTRE FOR SKILLING AND TECHNICAL SUPPORT (CSTS) - (CIPET), AURANGABAD
| 7123534
| IS 12786 (1989) |
Irrigation equipment - Polyethylene pipes for irrigation laterals - Specification |
- |
9725 View breakup
Rs. 9,725/-, For BIS Samples Rs.
7,431/-; For Raw Material : Rs.
6,700/-, For BIS Samples Rs. 5,181/-.
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1.a (Potyethylene - higher olefins constituent ) |
- |
1050 |
|
-- |
| 4.1.c.i (Density) |
- |
1125 |
|
500+625 |
| 4.1.c.ii (Toluene extract - Annex A) |
- |
1100 |
|
-- |
| 4.1.c.iii (Volatile matter - Annex B ) |
- |
700 |
|
-- |
| 4.1.c & 4.2.a (Carbon Black content - IS 2530 : 1963) |
- |
925 |
|
-- |
| 4.2.b (The dispersion of Carbon Black content shall be satisfactory - IS 2530 : 1963) |
- |
700 |
|
-- |
| 7.3(Tensile Test) |
- |
1350 |
|
1100+250 |
| 7.3(Elongation at Break) |
- |
0 |
|
-- |
| 7.4(SusceptibiIity to Environmental Stress
Cracking) |
- |
1200 |
|
-- |
| 7.2(Reversion Test) |
- |
900 |
|
700+200 |
|
31 Dec, 2026 |
-
- |
| 11227 |
CIPET: CENTRE FOR SKILLING AND TECHNICAL SUPPORT (CSTS) - (CIPET), AURANGABAD
| 7123534
| IS 4985 (2021) |
UNPLASTICIZED PVC PIPES FOR POTABLE WATER SUPPLIES SPECIFICATION Fourth Revision |
- |
31025 View breakup
For Elastomeric Sealing Ring Socket
Pipe : Rs. 26,825/- , For BIS Samples
Rs. 20,244/-; For Plain Ended/Socket
Ended Pipes : Rs. 20,975, For BIS
Samples Rs. 15,856/-; For Plumbing
Pipes : Rs. 9,975, For BIS Samples
Rs. 7,606/-; For PVC Resin : Rs.
4,100/- , For BIS Samples Rs. 3,075/-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 10.1(Colour) |
- |
300 |
|
- |
| 10.1(Surface Finish) |
- |
300 |
|
- |
| 7.2.1.1 Table3(Angle of taper (Note-1)) |
- |
250 |
|
- |
| 10.7(Sulphated Ash Content) |
- |
950 |
|
- |
| 7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Minimum)) |
- |
250 |
|
- |
| 7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Minimum)) |
- |
250 |
|
- |
| 7.1.2.1(DIMENSIONS-PIPE-Thickness(Minimum)) |
- |
250 |
|
- |
| 7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Minimum Length) |
- |
250 |
|
- |
| 7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Minimum)) |
- |
250 |
|
- |
| 9.1(PIPE ENDS) |
- |
300 |
|
- |
| 10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity) |
- |
575 |
|
- |
| 10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test) |
- |
1000 |
|
700+300 |
| 10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature) |
- |
1100 |
|
- |
| 10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density) |
- |
500 |
|
- |
| 11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)) |
- |
11000 |
|
- |
| 11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)) |
- |
850 |
|
- |
| 11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)-for Integral Sealing Ring Sockets) |
- |
11000 |
|
- |
| 11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Integral Sealing Ring Sockets) |
- |
850 |
|
- |
| 11.1.1(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Plumbing pipes) |
- |
850 |
|
- |
| 11.2(Resistance to External Blows at 0°C) |
- |
1400 |
|
1100+300 |
| 10.3(Effect on Water Test) |
- |
3000 |
|
- |
| 6.1.2(PVC Resin) |
- |
4100 |
|
3000+1100 |
|
31 Dec, 2026 |
-
REVISED VERSION OF IS 4985:2021 INCLUDED W.E.F. 14-10-2021. Size upto 400mm. |
| 11228 |
CIPET: CENTRE FOR SKILLING AND TECHNICAL SUPPORT (CSTS) - (CIPET), AURANGABAD
| 7123534
| IS 13488 (2008) |
Irrigation equipment - Emitting pipe systems - Specification (First Revision) |
- |
19062 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.1(Materials - shall be resistant to fertilizers and
chemicals commonly employed in irrigation, and shall
be suitable for use with water at temperatures up to
60°C and at pressures designed for the emitting pipe) |
- |
1050 |
|
-- |
| 5.1.2 (Ref. Cl 4.1.a of IS 12786 : 1989)(Potyethylene - higher olefins constituent ) |
- |
1050 |
|
-- |
| 5.1.2 (Ref. Cl 4.1.b of IS 12786 : 1989)(Potyethylene - anti-oxidant) |
- |
2000 |
|
-- |
| 5.1.2 (Ref. Cl 4.1.c.i of IS 12786 : 1989)(Density) |
- |
1125 |
|
500+625 |
| 5.1.2 (Ref. Cl 4.1.c.ii of IS 12786 : 1989)(Toluene extract - Annex A of IS 12786:1989) |
- |
1000 |
|
-- |
| 5.1.2 (Ref. Cl 4.1.c.iii of IS 12786 : 1989)(Volatile matter - Annex B of IS 12786:1989) |
- |
700 |
|
-- |
| 5.1.2 (Ref. Cl 4.1.c & 4.2.a of IS 12786 : 1989)(Carbon Black content - IS 2530 : 1963) |
- |
925 |
|
-- |
| 5.1.2 (Ref. Cl 4.2.b of IS 12786 : 1989)(The dispersion of Carbon Black content shall be satisfactory - IS 2530 : 1963) |
- |
700 |
|
-- |
| 6.2.2(Fittings) |
- |
250 |
|
-- |
| 8.1.2(Uniformity of Emission Rate for Unregulated Emitting Pipes) |
- |
1000 |
|
-- |
| 8.1.3(Uniformity of Emission Rate for Regulated Emitting Pipes) |
- |
1000 |
|
-- |
| 8.2(Emission Rate of Emitting Unit as a Function of Inlet Pressure) |
- |
1000 |
|
-- |
| 8.2.1(Unregu/Qt~d Emining Pipe) |
- |
0 |
|
-- |
| 8.2.2(Regulated Emitting Pipes) |
- |
1000 |
|
-- |
| 8.3.1(Wall Thickness ofEmitting Pipe) |
- |
250 |
|
-- |
| 8.3.2(Inside Diameter ofEmitting Pipe) |
- |
250 |
|
-- |
| 8.3.3(Flow Paths in Emitting Unit) |
- |
200 |
|
-- |
| 8.3.4(Spacing ofEmitter Units) |
- |
200 |
|
-- |
| 8.4.1(Resistance to Hydrostatic Pressure at Ambient Temperature) |
- |
1000 |
|
-- |
| 8.4.2(Resistance to Hydrostatic Pressure at Elevated Temperature) |
- |
1600 |
|
-- |
| 8.5(Resistance to Tension at Elevated Temperature) |
- |
1100 |
|
-- |
| 8.6(Resistance to Pull Out of Joints Between Fitting and Emitting
IS 13479) |
- |
400 |
|
-- |
| 8.7.1(Resistance of PE Emitting Pipe to
Environmental Stress Cracking -Acceptance Test
Annex D of IS 12786) |
- |
1200 |
|
-- |
| 8.7.2(Resistance of PE Emitting Pipe to
Environmental Stress Cracking - Type Test
Annex D of IS 12786) |
- |
1600 |
|
-- |
| 8.8(Determination of Emitting Unit Exponent) |
- |
600 |
|
-- |
| 9.1(DESIGNATION - Non regulated Emitting Pipe) |
- |
0 |
|
-- |
| 9.2(DESIGNATION - Regulated Emitting Pipe) |
- |
0 |
|
-- |
| 4.1 a(Identification) |
- |
1050 |
|
- |
| 4.1 a(Identification) |
- |
1050 |
|
- |
| 4.1 d(Density) |
- |
500 |
|
- |
| 4.1 c(Volatile matter Extract) |
- |
800 |
|
- |
| 4.2(Carbon black content) |
- |
925 |
|
- |
| 4.2(Carbon black dispersion) |
- |
700 |
|
- |
|
31 Dec, 2026 |
-
- |
| 11229 |
CIPET: CENTRE FOR SKILLING AND TECHNICAL SUPPORT (CSTS) - (CIPET), AURANGABAD
| 7123534
| IS 13487 (1992) |
Irrigation equipment - Emitters - Specification |
- |
4700 View breakup
Rs. 4,700/-, For BIS Samples Rs.
3,525/- .
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7.1(Construction and workmanship) |
- |
300 |
|
Construction & Workmanship |
| 7.2(Flow path in emitters) |
- |
300 |
|
Flow Path in Emitter |
| 7.3.1(Resistance to Hydrostatic pressure) |
- |
999.99 |
|
Resistance to Hydrostatic pressure |
| 7.3.2(Resistance to Hydrostatic pressure) |
- |
0 |
|
included in 7.3.1 |
| 7.3.3(Resistance to Hydrostatic pressure) |
- |
0 |
|
included in 7.3.1 |
| 7.4.1(Emitter Pull Out In-line emitters) |
- |
500 |
|
Emitter Pullout |
| 7.4.2(Emitter Pull Out On-line emitters) |
- |
0 |
|
Included in 7.4.1 |
| 8.1.2(Uniformity of Emission Rate Unregulated emitters) |
- |
1000 |
|
Uniformity of emission rate |
| 8.1.3(Uniformity of Emission Rate Regulated emitters) |
- |
0 |
|
Included in 8.1.2 |
| 8.2.2(Emission rate as a function of inlet pressure Unregulated emitters) |
- |
1000 |
|
Emission rate as a function of inlet pressure |
| 8.2.3(Emission rate as a function of inlet pressure Regulated emitters) |
- |
0 |
|
Included 8.2.2 |
| 8.3(Determination of Emitter Exponent) |
- |
600 |
|
Determination of Emitter Exponent |
| 4(Classification) |
- |
0 |
|
- |
|
31 Dec, 2026 |
-
- |
| 11230 |
CIPET: CENTRE FOR SKILLING AND TECHNICAL SUPPORT (CSTS) - (CIPET), AURANGABAD
| 7123534
| IS 4984 (2016) |
Polyethylene pipes for water supply - Specification (Fifth Revision) |
- |
49525 View breakup
Rs. 49525/-; For BIS Samples : Rs. 31,869/- ; Raw Material : Rs. 5,825/-; For BIS Sample : Rs. 4,525/-; For Carbon Black Master Batch : Rs. 1,875/-; For BIS Sample : Rs. 1,406/-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5, 5.1 table-1(MATERIALS) |
- |
0 |
|
-- |
| 5.2(Polyethylene Resin) |
- |
1050 |
|
-- |
| 5.3 (a)(Carbon Black Master Batch) |
- |
1875 |
|
925+950 |
| 5.3(b)(Carbon Black Master Batch) |
- |
500 |
|
-- |
| 5.3(c)(Carbon Black Master Batch) |
- |
900 |
|
-- |
| 5.3(d)(Carbon Black Master Batch) |
- |
700 |
|
-- |
| 5.3(e)(Carbon Black Master Batch) |
- |
950 |
|
-- |
| 8.3(Carbon black) |
- |
925 |
|
-- |
| 8.6(Overall migration) |
- |
2000 |
|
1700+300 |
| 6, 6.1(PIPE DESCRIPTION) |
- |
0 |
|
-- |
| 6.2(Colour) |
- |
300 |
|
-- |
| 6.2.1(6.1.1 Identification Stripes) |
- |
250 |
|
-- |
| 7.2(Length) |
- |
250 |
|
-- |
| Cl-7.4(Mean Outside Diameter (For upto 50 mm take 8 reading, above 50mm take 6 reading & average will be reported)) |
- |
500 |
|
-- |
| 7.4.1.2(Ovality) |
- |
250 |
|
-- |
| 8,/8.1/8.1.1 table-5(PERFORMANCE REQUIREMENTS / Hydraulic Characteristics/ Internal Pressure Creep Rupture Test of Pipe) |
- |
21400 |
|
100 hrs test=4000
48 hrs test =1600
165 hrs test =4800
1000 hrs test = 11000 |
| 8.1.2 table -5(Internal Pressure Creep Rupture Test of Pipe Joints) |
- |
1600 |
|
-- |
| 8.2(Longitudinal Reversion Test) |
- |
900 |
|
700+200 |
| 8.4( Melt Flow Rate) |
- |
1100 |
|
-- |
| 8.5 (Oxidation Induction Time) |
- |
2200 |
|
-- |
| 8.7(Density) |
- |
500 |
|
-- |
| 8.8(Tensile Strength for Butt-fusion) |
- |
1600 |
|
-- |
| 8.9 table-6(Elongation at Break) |
- |
1600 |
|
-- |
| 8.10(Slow Crack Growth Rate) |
- |
6000 |
|
5500+500 |
|
31 Dec, 2026 |
-
Size upto 400mm |
| 11231 |
CIPET: CENTRE FOR SKILLING AND TECHNICAL SUPPORT (CSTS) - (CIPET), AURANGABAD
| 7123534
| IS 12701 (1996) |
Rotational moulded polyethylene water storage tanks - specification (First Revision) |
- |
13850 View breakup
For Storage Tanks upto 1500 litres:
Rs. 17,150/-, For BIS Samples Rs.
13,175/-; For Storage Tanks above
1500 litres: Rs. 18,050/-, For BIS
Samples Rs. 13,850/- .
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.2.3(Carbon Black Content ) |
- |
925 |
|
Carbon black content * |
| 4.2.3(Carbon Dispersion Test) |
- |
700 |
|
Carbon black content |
| 5(Types and Features ) |
- |
3100 |
|
Net & Gross Capacity 500
Overall Diameter 250
Overall Height 250
Internal dia of man - hole 250
Wall thickness upon effective height 250
Wall thickness above effective height 250
Minimum weight without lid 500 |
| 5.1 Table 1(Dimensioas of Cylinderical Vertical Tank) |
- |
0 |
|
included in Types and feature |
| 5.1 Table 1(Dimensioas of Cylinderical Vertical Tank) |
- |
0 |
|
included in Types and feature |
| 5.1 Table 1(Dimensioas of Cylinderical Vertical Tank) |
- |
0 |
|
included in Types and feature |
| 5.1 Table 1(Dimensioas of Cylinderical Vertical Tank) |
- |
0 |
|
included in Types and feature |
| 5.1 Table 1(Dimensioas of Cylinderical Vertical Tank) |
- |
0 |
|
included in Types and feature |
| 5.1 Table 1(Dimensioas of Cylinderical Vertical Tank) |
- |
0 |
|
included in Types and feature |
| 5.1 Table 1(Dimensioas of Cylinderical Vertical Tank) |
- |
0 |
|
included in Types and feature |
| 5.2 Table 2(Dimensions of Rectangular Loft Tanks) |
- |
0 |
|
included in Types and feature |
| 5.2 Table 2(Dimensions of Rectangular Loft Tanks) |
- |
0 |
|
included in Types and feature |
| 5.2 Table 2(Dimensions of Rectangular Loft Tanks) |
- |
0 |
|
included in Types and feature |
| 5.2 Table 2(Dimensions of Rectangular Loft Tanks) |
- |
0 |
|
included in Types and feature |
| 5.2 Table 2(Dimensions of Rectangular Loft Tanks) |
- |
0 |
|
included in Types and feature |
| 5.2 Table 2(Dimensions of Rectangular Loft Tanks) |
- |
0 |
|
included in Types and feature |
| 5.3(Types and Features ) |
- |
0 |
|
included in Types and feature |
| 5.6(Types and Features ) |
- |
0 |
|
included in Types and feature |
| 6.1(Finish) |
- |
300 |
|
Finish / Visual Appearance |
| 7.1.1(Resistance to Deformation) |
- |
700 |
|
Resistance to deformation |
| 7.1.2(Resistance to Deformation) |
- |
0 |
|
Resistance to deformation |
| 7.2(Resistance to Impact) |
- |
1100 |
|
Resistance to impact |
| 7.3(Test for Top Load Resistance) |
- |
900 |
|
Top load resistance (for 1500 lit and more) |
| 7.4(Tensile Strength) |
- |
1100 |
|
Tensile Strength |
| 7.5(Flexural Modulus) |
- |
1100 |
|
Flexural modulus |
| 7.6(overall Migration) |
- |
1700 |
|
Overall Migration 40°C / Water/ 10 days |
|
31 Dec, 2026 |
-
- |
| 11232 |
BIS, Bengaluru Branch Laboratory (BNBL)
| None
| IS 15500 : PART 6 (2021) |
Deepwell Handpumps, Components and Secial Tools — Specification Part 6 Handpumps |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Fig. 6.1 (Brass Liner) |
- |
|
|
|
| Fig. 6.2 ("Plunger Yoka Body
(for SDWP, EDWP, VLOM 65 and FLP)") |
- |
|
|
|
| Fig. 6.3 (Upper Valve (for SDWP, EDWP, VLOM 65 and FLP)) |
- |
|
|
|
| Fig. 6.4 (" Bucket Spacer-Standard
(for SDWP, EDWP, VLOM 65 and FLP)") |
- |
|
|
|
| Fig. 6.4 (" Bucket Spacer-Standard
(for SDWP, EDWP, VLOM 65 and FLP)") |
- |
|
|
|
| Fig. 6.4 (" Bucket Spacer-Standard
(for SDWP, EDWP, VLOM 65 and FLP)") |
- |
|
|
|
| Fig. 6.4 (" Bucket Spacer-Standard
(for SDWP, EDWP, VLOM 65 and FLP)") |
- |
|
|
|
| Fig. 6.4 (" Bucket Spacer-Standard
(for SDWP, EDWP, VLOM 65 and FLP)") |
- |
|
|
|
| Fig. 6.4 (" Bucket Spacer-Standard
(for SDWP, EDWP, VLOM 65 and FLP)") |
- |
|
|
|
| Fig. 6.4 (" Bucket Spacer-Standard
(for SDWP, EDWP, VLOM 65 and FLP)") |
- |
|
|
|
| Fig. 6.5 ("Bucket Spacer-Lower
(for EDWP)") |
- |
|
|
|
| Fig. 6.5 ("Bucket Spacer-Lower
(for EDWP)") |
- |
|
|
|
| Fig. 6.5 ("Bucket Spacer-Lower
(for EDWP)") |
- |
|
|
|
| Fig. 6.5 ("Bucket Spacer-Lower
(for EDWP)") |
- |
|
|
|
| Fig. 6.5 ("Bucket Spacer-Lower
(for EDWP)") |
- |
|
|
|
| Fig. 6.6 (Follower (SDWP and FLP)) |
- |
|
|
|
| Fig. 6.7 (Follower-EDW) |
- |
|
|
|
| Fig. 6.11 ("Rubber Seat Retainer
(for SDWP, EDWP & FLP)") |
- |
|
|
|
| Fig. 6.12 ("Check Valve Seat-Standard
(for SDWP & EDWP)") |
- |
|
|
|
| Fig. 6.13 (Check Valve Seat-VLOM 65) |
- |
|
|
|
| Fig. 6.13 (Check Valve Seat-VLOM 65) |
- |
|
|
|
|
- |
-
Exclusion
Material Testing. |
| 11233 |
BIS, Bengaluru Branch Laboratory (BNBL)
| None
| IS 15500 : PART 5 (2021) |
Deepwell Handpumps, Components and Secial Tools — Specification Part 5 Handpumps |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Fig. 5.1 (Cylinder Body-Standard (for SDWP and FLP)) |
- |
|
|
|
| Fig. 5.1 (Cylinder Body-Standard (for SDWP and FLP)) |
- |
|
|
|
| Fig. 5.2 (Cylinder Body-Long (for EDWP and VLOM 65)) |
- |
|
|
|
| Fig. 5.2 (Cylinder Body-Long (for EDWP and VLOM 65)) |
- |
|
|
|
| Fig. 5.3 (Cylinder Body-VLOM 50) |
- |
|
|
|
| Fig. 5.3 (Cylinder Body-VLOM 50) |
- |
|
|
|
| Fig. 5.4 ("Reducer Cap
(for SDWP, EDWP and FLP)") |
- |
|
|
|
| Fig. 5.4 ("Reducer Cap
(for SDWP, EDWP and FLP)") |
- |
|
|
|
| Fig. 5.5 B ("Cylinder Caps-VLOM 65
(for SDWP and EDWP)") |
- |
|
|
|
| Fig. 5.6 A (Cylinder Caps-VLOM 50) |
- |
|
|
|
| Fig. 5.6 B (Cylinder Caps-VLOM 50) |
- |
|
|
|
|
- |
-
Exclusion
Material Testing. |
| 11234 |
Allumera Engineering Solutions Pvt ltd
| 8175206
| IS 16714 (2018) |
Ground granulated blast furnace slag for use in cement, mortar and concrete - Specification |
all |
15000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6 and Table 2 i(Fineness
IS 4031 (Part 2)) |
- |
1000 |
|
- |
| 6 and Table 2 ii a(Slag activity index -7 days) |
- |
1350 |
|
- |
| 6 and Table 2 ii b(Slag activity index -28 days) |
- |
1500 |
|
- |
| Clause 5.1(Manganese oxide (MnO)) |
- |
950 |
|
- |
| Clause 5.1(Magnesium oxide (MgO)) |
- |
950 |
|
- |
| Clause 5.1(Sulphide sulphur (S)) |
- |
950 |
|
- |
| Clause 5.1(Sulphate (as SO3),) |
- |
700 |
|
- |
| Clause 5.1(Insoluble residue) |
- |
750 |
|
- |
| Clause 5.1(Chloride content) |
- |
750 |
|
- |
| Clause 5.1(Loss on ignition) |
- |
750 |
|
- |
| Clause 5.1((CaO+MgO+1/3AlO3)/( SiO2 +2/3 AlO3)) |
- |
1350 |
|
- |
| Clause 5.1((CaO+MgO+Al2O3)/ SiO2) |
- |
1350 |
|
- |
| Clause 5.1((CaO+CaS+1/2 MgO+Al2O3)/ (SiO2+ MnO)) |
- |
1000 |
|
- |
|
13 Dec, 2026 |
-
- |
| 11235 |
Central Institute of Petrochemicals Engineering and Technology (CIPET), BADDI
| 9163904
| IS 11652 (2017) |
Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg cement – Specification (third revision) |
All |
7913 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.2
(Fabric) |
- |
1050 |
|
-- |
| 4.2
(Fabric) |
- |
250 |
|
-- |
| 4.3(Sacks) |
- |
300 |
|
-- |
| 4.4(Seam) |
- |
250 |
|
-- |
| 4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used
in the fabric.) |
- |
1050 |
|
-- |
| 4.4(Seam The stitching shall be done with double fold over seam to) |
- |
1100 |
|
-- |
| 4.7(Valve for Filling of Sacks) |
- |
250 |
|
-- |
| 4.6(Capacity The sack shall have the nominal filling capacity of 50 kg) |
- |
400 |
|
-- |
| 4.5(Lamination ) |
- |
500 |
|
-- |
| 5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964
a) gusseted type 71 + 6%) |
- |
500 |
|
-- |
| 5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) ) |
- |
2200 |
|
-- |
| 5/5.6 (UV Resistance, ) |
- |
10180 |
|
-- |
| 5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed
to a) UV Radiation -Annex F ) |
- |
2200 |
|
-- |
| 4.4(Seam) |
- |
2200 |
|
-- |
| 5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) ) |
- |
1100 |
|
-- |
| 5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) ) |
- |
1100 |
|
-- |
| 5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8)) |
- |
1100 |
|
-- |
| 5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8)) |
- |
1100 |
|
-- |
| 5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25) |
- |
1100 |
|
-- |
| 5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25) |
- |
1100 |
|
-- |
| 5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2
) |
- |
950 |
|
-- |
| 5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed
to b) Accelerated Weathering - Annex F ) |
- |
2200 |
|
-- |
|
16 May, 2028 |
-
- |
| 11236 |
Central Institute of Petrochemicals Engineering and Technology (CIPET), BADDI
| 9163904
| IS 14611 (2016) |
Multilayered cross laminated sheets/tarpaulins/covers/agricultural films - Specification (First Revision) |
All |
33599 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl. 6.1(Workmanship) |
- |
250 |
|
- |
| Cl. 6.2(Substance) |
- |
250 |
|
- |
| Cl. 6.4(water proofness test) |
- |
1000 |
|
- |
| Cl. 6.5(Strenght of joints/seams) |
- |
1100 |
|
- |
| Cl. 6.6(Flex test) |
- |
9000 |
|
- |
| Cl. 6.7(Ease of in-situ Repair) |
- |
250 |
|
- |
| Cl. 7.1(Eyelets and rope lashing) |
- |
250 |
|
- |
| Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (a)(Tensile strenght, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- XLN Extra light) |
- |
2200 |
|
- |
| Cl. 6.2,6.3,6.8, table no. 1 Sl No. ii (a)(Tensile strenght, Ref. IS 13360(Part 5/Sec 1) and IS 13360 (Part 5/Sec 3), test condition-specimen type 2 and test speed 500 mm/min, Grade- LN light) |
- |
2200 |
|
- |
| Cl. 6.3(Accelerated ageing test) |
- |
4200 |
|
- |
| Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (a)(Tear strenght, Annex-F, Grade- XLN Extra light) |
- |
2200 |
|
- |
| Cl. 6.2,6.3,6.8, table no. 1 Sl No. iv (b)(Tear strenght, Annex-F, Grade- XLN Extra light) |
- |
2200 |
|
- |
| Table1 - v)(Dart Impact Strength) |
- |
850 |
|
- |
| Table1 - vi)(Average Tensile Strength & Elongation at Break after Exposing to UV Radiation & Weathering) |
- |
10180 |
|
- |
| Cl. 6.2,6.3,6.8, table no. 1 Sl No. (vi)(Average tensile strenght and elongation at break after exposing to UV radiation and weathering, Annex- G, Grade- XLN Extra light) |
- |
2200 |
|
- |
|
16 May, 2028 |
-
- |
| 11237 |
Central Institute of Petrochemicals Engineering and Technology (CIPET), BADDI
| 9163904
| IS 9755 (2016) |
Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packing fertilizers – Specification (fifth revision) |
All |
20605 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.1(MANUFACTURE-Raw Material) |
- |
1050 |
|
-- |
| 3.2(MANUFACTURE-) |
- |
250 |
|
-- |
| 3.2(MANUFACTURE) |
- |
500 |
|
-- |
| 3.3(Sacks) |
- |
300 |
|
-- |
| 3.4(Liner) |
- |
1050 |
|
-- |
| 3.4.1(Liner) |
- |
250 |
|
-- |
| 3.4.1(Liner) |
- |
200 |
|
-- |
| 3.4.2(Lamination) |
- |
300 |
|
-- |
| 3.4.2(Lamination) |
- |
250 |
|
-- |
| 3.5(Bottom Seam-(see IS 10789).) |
- |
250 |
|
-- |
| 3.5(Bottom Seam-(see IS 10789).) |
- |
1050 |
|
-- |
| 3.7(Mouth of the Sack) |
- |
250 |
|
-- |
| 3.8(Capacity- The sack shall have the nominal capacity of 50 kg.) |
- |
250 |
|
-- |
| 4.1 , Table 1(REQUIREMENTS) |
- |
250 |
|
-- |
| 4.1 , Table 1(REQUIREMENTS) |
- |
1000 |
|
-- |
| 4.2(UV Resistance) |
- |
2200 |
|
-- |
| 4.2(UV Resistance) |
- |
1100 |
|
-- |
| 4.2(UV Resistance) |
- |
10180 |
|
-- |
| 4.2(UV Resistance-The HDPE/PP woven fabric of sack made out of UV stabilized material shall have at least 50 percent of the original breaking strength when tested after the
same has been exposed to UV radiation and weathering as per the method given in Annex D.) |
- |
2200 |
|
-- |
| 4.3(Mass-(Annexure E)) |
- |
950 |
|
-- |
| 4.3(Mass-(Annexure E)) |
- |
250 |
|
-- |
| 3.6(Bottom Seam-tThe stitching shall be done
with double fold over seam to a depth of minimum 25 mm, so that the stitches pass through a minimum of six layers of the fabric.) |
- |
250 |
|
-- |
|
16 May, 2028 |
-
- |
| 11238 |
Central Institute of Petrochemicals Engineering and Technology (CIPET), BADDI
| 9163904
| IS 4984 (2016) |
Polyethylene pipes for water supply - Specification (Fifth Revision) |
All |
31869 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6.2(Colour) |
- |
250 |
|
- |
| 6.2.1(6.1.1 Identification Stripes) |
- |
250 |
|
- |
| 7.2(Length) |
- |
0 |
|
- |
| Cl-7.4(Mean Outside Diameter (For upto 50 mm take 8 reading, above 50mm take 6 reading & average will be reported)) |
- |
500 |
|
- |
| 8.5 (Oxidation Induction Time) |
- |
2200 |
|
- |
| 6, 6.1(PIPE DESCRIPTION) |
- |
300 |
|
- |
| 8,/8.1/8.1.1 table-5(PERFORMANCE REQUIREMENTS / Hydraulic Characteristics/ Internal Pressure Creep Rupture Test of Pipe) |
- |
21400 |
|
- |
| 8.1.2 table -5(Internal Pressure Creep Rupture Test of Pipe Joints) |
- |
1600 |
|
- |
| 8.2(Longitudinal Reversion Test) |
- |
900 |
|
- |
| 8.3(Carbon black) |
- |
1625 |
|
- |
| 8.4( Melt Flow Rate) |
- |
1100 |
|
- |
| 8.6(Overall migration) |
- |
2000 |
|
- |
| 8.7(Density) |
- |
500 |
|
- |
| 8.8(Tensile Strength for Butt-fusion) |
- |
1600 |
|
- |
| 8.9 table-6(Elongation at Break) |
- |
1600 |
|
- |
| 8.10(Slow Crack Growth Rate) |
- |
6000 |
|
- |
|
16 May, 2028 |
-
Up to 355mm. |
| 11239 |
Central Institute of Petrochemicals Engineering and Technology (CIPET), BADDI
| 9163904
| IS 14151 : Part 2 (2008) |
Irrigation equipment - Sprinkler pipes - Specification: Part 2 quick coupled polyethylene pipes and fittings (Second Revision) |
All |
30419 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7.2.1 (Visual and Workmanship Requirement) |
- |
300 |
|
- |
| 4.1 .1.2.1(HDPE couplers) |
- |
1000 |
|
- |
| 4.1 .1.2.2(HDPE couplers) |
- |
2200 |
|
- |
| Cl.4.1(Quick Coupled Male and Female Couplers) |
- |
925 |
|
- |
| Cl.4.1(Quick Coupled Male and Female Couplers) |
- |
3500 |
|
- |
| 4.2.7(Insert vatve couplers Table 1 of IS 8008 (Part 3)) |
- |
0 |
|
- |
| 3(QUICK COUPLED PIPES) |
- |
19175 |
|
- |
| Cl.4.1.3(Workmanship and appearance ) |
- |
1050 |
|
- |
| 4.1.4(a)(Holding Attachments for Coupler Parts) |
- |
300 |
|
- |
| Cl 4.1.5(Rubber rings- A)Shore hardness (Shore-A)) |
- |
375 |
|
- |
| Cl 4.1.5(Rubber rings- B) Change in hardness) |
- |
375 |
|
- |
| 4.1.5(Rubber Ring) |
- |
4200 |
|
- |
| 6.1.1, 6.1.1.1(Leakage Test) |
- |
850 |
|
- |
| 6.1.2, 6.1.2.1( Hydraulic Proof Test) |
- |
850 |
|
- |
| 6.1.3, 6.1.3.1(Weldability Test) |
- |
6400 |
|
- |
|
16 May, 2028 |
-
for HDPE couplers & fittings only |
| 11240 |
Central Institute of Petrochemicals Engineering and Technology (CIPET), BADDI
| 9163904
| IS 4985 (2000) |
Unplasticized pvc pipes for potable water supplies - Specification (Third Revision) |
All |
20319 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7(DIMENSIONS-PIPE-Nominal Diameter) |
- |
500 |
|
-- |
| 10.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance) |
- |
300 |
|
-- |
| 10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity) |
- |
575 |
|
-- |
| 10.1(Colour) |
- |
0 |
|
-- |
| 10.1.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance) |
- |
0 |
|
-- |
| 10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test) |
- |
900 |
|
-- |
| 10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature) |
- |
1100 |
|
-- |
| 10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density) |
- |
500 |
|
-- |
| Clause 10.7(Sulphated Ash Content) |
- |
950 |
|
-- |
| 11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)) |
- |
11000 |
|
-- |
| 11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)-for Integral Sealing Ring
Sockets) |
- |
5000 |
|
-- |
| 11.2(Resistance to External Blows at 0°C) |
- |
1400 |
|
-- |
| 10.3(Effect on Water) |
- |
3000 |
|
-- |
| 7.1.2.1(DIMENSIONS-PIPE-Average Thickness) |
- |
0 |
|
-- |
| 7.1.2.1(DIMENSIONS-PIPE-Thickness(Maximum)) |
- |
0 |
|
-- |
| 7.1.2.1(DIMENSIONS-PIPE-Thickness(Minimum)) |
- |
0 |
|
-- |
| 7.1.1.2(DIMENSIONS-PIPE-Ovality (Maximum)) |
- |
0 |
|
-- |
| 7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Maximum)) |
- |
0 |
|
-- |
| 7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Minimum)) |
- |
0 |
|
-- |
| 7.1.1.1(DIMENSIONS-PIPE-Mean O.D. Variation) |
- |
0 |
|
-- |
| 7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Mamimum)) |
- |
0 |
|
-- |
| 7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Minimum)) |
- |
0 |
|
-- |
| 11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)) |
- |
850 |
|
-- |
| 11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Integral Sealing Ring
Sockets) |
- |
850 |
|
-- |
|
16 May, 2028 |
-
- |
| 11241 |
Central Institute of Petrochemicals Engineering and Technology (CIPET), BADDI
| 9163904
| IS 10889 (2004) |
High density polyethylene films (First Revision) |
Grade-1 & 2 |
5850 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.1(Materials) |
- |
1600 |
|
500 density + 1100 MFI |
| 5.2(Black Compound) |
- |
1625 |
|
925 CBC + 700 CBD |
| 6.1.1(Appearance) |
- |
100 |
|
-- |
| 6.1.2(Film Form) |
- |
100 |
|
-- |
| 6.1.3(Odour ) |
- |
100 |
|
-- |
| 6.1.4(Density) |
- |
500 |
|
-- |
| 6.1.5(Melt Flow Rate) |
- |
1100 |
|
-- |
| 6.1.6(Black Film) |
- |
1625 |
|
925 CBC + 700 CBD |
| 6.2.1, Table 1(Nominal Thickness) |
- |
250 |
|
-- |
| 6.2.2, Table 2(Nominal Width) |
- |
250 |
|
-- |
| 6.3, Table 3(Yield Tolerance) |
- |
600 |
|
-- |
| 6.4.1(Tensile Strength at Break) |
- |
2200 |
|
MD & TD |
| 6.4.2(Elongation at Break) |
- |
0 |
|
-- |
| 6.4.3(Impact Resistance (Falling Dart)) |
- |
850 |
|
-- |
|
16 May, 2028 |
-
- |
| 11242 |
Central Institute of Petrochemicals Engineering and Technology (CIPET), BADDI
| 9163904
| IS 12786 (1989) |
Irrigation equipment - Polyethylene pipes for irrigation laterals - Specification |
All |
7431 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1.a (Potyethylene - higher olefins constituent ) |
- |
1050 |
|
- |
| 4.1.c.ii (Toluene extract - Annex A) |
- |
1100 |
|
- |
| 4.1.c.iii (Volatile matter - Annex B ) |
- |
700 |
|
- |
| 4.1.c.i (Density) |
- |
1125 |
|
- |
| 4.1.c & 4.2.a (Carbon Black content - IS 2530 : 1963) |
- |
925 |
|
- |
| 4.2.b (The dispersion of Carbon Black content shall be satisfactory - IS 2530 : 1963) |
- |
700 |
|
- |
| 5 and Table 1(DIMENSIONS OF PIPES - outside diameters) |
- |
250 |
|
- |
| 6.1(Visual Appearance) |
- |
300 |
|
- |
| 7.1(Hydraulic Characteristics) |
- |
4000 |
|
- |
| 7.2(Reversion Test) |
- |
1000 |
|
- |
| 7.3(Tensile Test) |
- |
1350 |
|
- |
| 7.4(SusceptibiIity to Environmental Stress
Cracking) |
- |
1200 |
|
- |
|
16 May, 2028 |
-
- |
| 11243 |
Central Institute of Petrochemicals Engineering and Technology (CIPET), BADDI
| 9163904
| IS 12701 (1996) |
Rotational moulded polyethylene water storage tanks - specification (First Revision) |
Capacity upto 1000 litre |
13850 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.2.3(Carbon Black Content ) |
- |
1850 |
|
925 Tank + 925 Lid |
| 4.2.3(Carbon Dispersion Test) |
- |
1400 |
|
700 Tank + 700 Lid |
| 5(Types and Features ) |
- |
0 |
|
-- |
| 5.1 Table 1(Dimensioas of Cylinderical Vertical Tank) |
- |
250 |
|
-- |
| 5.1 Table 1(Dimensioas of Cylinderical Vertical Tank) |
- |
500 |
|
-- |
| 5.1 Table 1(Dimensioas of Cylinderical Vertical Tank) |
- |
250 |
|
-- |
| 5.1 Table 1(Dimensioas of Cylinderical Vertical Tank) |
- |
500 |
|
-- |
| 5.1 Table 1(Dimensioas of Cylinderical Vertical Tank) |
- |
500 |
|
-- |
| 5.3(Types and Features ) |
- |
600 |
|
300 Tank + 300 Lid |
| 5.4(Wall Thickness above effective height) |
- |
500 |
|
250 + 250 outer layer |
| 6.1(Finish) |
- |
300 |
|
-- |
| 7.1.1(Resistance to Deformation) |
- |
700 |
|
-- |
| 7.2(Resistance to Impact) |
- |
1100 |
|
-- |
| 7.4(Tensile Strength) |
- |
1350 |
|
1100 + 250 specimen charges |
| 7.5(Flexural Modulus) |
- |
1600 |
|
1100 + 500 Specimen charges |
| 7.6(overall Migration) |
- |
2200 |
|
1700 + 500 Specimen charges |
| 9.1(Man-Hole and Hand-Hole Lids) |
- |
1050 |
|
-- |
| 9.1(Lid Thickness) |
- |
250 |
|
-- |
| 9.2.1(Man-Hole and Hand-Hole Lids) |
- |
400 |
|
-- |
| 5.2 Table 2(Dimensions of Rectangular Loft Tanks) |
- |
250 |
|
-- |
| 7.1.2(Resistance to Deformation) |
- |
700 |
|
-- |
|
16 May, 2028 |
-
- |
| 11244 |
Central Institute of Petrochemicals Engineering and Technology (CIPET), BADDI
| 9163904
| IS 14333 (1996) |
High Density Polyethylene Pipe For Sewerage - |
All |
8681 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4(Colour) |
- |
300 |
|
- |
| 6(Dimensions of pipes) |
- |
250 |
|
- |
| 7(Visual Appearance) |
- |
300 |
|
- |
| 8.1(Hydraulic characteristics) |
- |
6400 |
|
- |
| 8.2(Reversion) |
- |
1000 |
|
- |
| 8.3(Density) |
- |
500 |
|
- |
| 8.4(Melt Flow Rate) |
- |
1100 |
|
- |
| Cl. 8.5, IS 2530-1963, Cl. 10(Cabon Black Content) |
- |
925 |
|
- |
| Cl. 8.5, IS 2530-1963, Cl. 16(Carbon Black Dispersion) |
- |
700 |
|
- |
|
16 May, 2028 |
-
- |
| 11245 |
Central Institute of Petrochemicals Engineering and Technology (CIPET), BADDI
| 9163904
| IS 14151 : Part 1 (1999) |
Irrigation equipment - Sprinkler pipes - Specification: Part 1 polyethylene pipes (First Revision) |
All |
14519 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1(melt flow rating (MFR) shall not exceed 1.10 g/10 min.) |
- |
1100 |
|
- |
| 4.1.1(density shall be between 940.4 kg/m’ and 958.4 kg/m3 (both inclusive) when determined at 27°C according to procedure prescribed in Annex A of IS 7328. The value of the density shall also not differ from the nominal value by more than 3 kg/m2 as per 5.2.1.1 of IS 7328.) |
- |
1125 |
|
- |
| Cl. 4.2 , IS 2530-1963, Cl. 10(Cabon Black Content) |
- |
1625 |
|
- |
| 5.1 table -1(DIMENSIONS OF PIPES) |
- |
500 |
|
- |
| 6.1(VISUAL APPEARANCE) |
- |
300 |
|
- |
| 7.1 Table -2(Hydraulic Characteristics) |
- |
6400 |
|
- |
| 7.2(Reversion Test) |
- |
1000 |
|
- |
| 7.3(Tensile Test) |
- |
1350 |
|
- |
| 7.4table-2(Fusion Compatibility Test) |
- |
6400 |
|
- |
| 7.5(Density) |
- |
500 |
|
- |
| 7.6(Melt now Rate (MFR)) |
- |
1100 |
|
- |
|
16 May, 2028 |
-
- |
| 11246 |
Central Institute of Petrochemicals Engineering and Technology (CIPET), BADDI
| 9163904
| IS 2508 (2016) |
Polyethylene films and sheets - Specification (Third Revision) |
Type I & Type II |
13531 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.1.5(Melt Flow Index. Cl 6, 7 of IS 13360(Part-4/Section-1)) |
- |
1100 |
|
-- |
| 5.1.1(Appearance) |
- |
100 |
|
-- |
| 5.1.2(Film Form) |
- |
100 |
|
-- |
| 5.1.3(Odour) |
- |
100 |
|
-- |
| 5.1.4(Density, Cl.5 of IS 13360(Part-3/Section-1)) |
- |
500 |
|
-- |
| 5.1.6a(Carbon Black Content, Annex-A) |
- |
925 |
|
-- |
| 5.1.6b(Ash Content, Annex-A) |
- |
950 |
|
-- |
| 5.1.6c(Carbon Black Dispersion, Cl.16 of IS 2530) |
- |
700 |
|
-- |
| 5.2.2(Tolerance on Thickness, Annex-A) |
- |
500 |
|
-- |
| 6.1, Table 1(Tensile strength at break. A) Machine Direction. IS 13360 (Part 5/Sec 1)) |
- |
1350 |
|
1100 + 250(Specimen Charges) |
| 6.1, Table 1(Tensile strength at break. B) Transverse Direction. IS 13360 (Part 5/Sec 3)) |
- |
1100 |
|
-- |
| 6.1, Table 1(Ageing test at (70-1)c for 7 days , cl 4 IS 7016 ) |
- |
4300 |
|
-- |
| 6.1, Table 1(Elongation at break ,A) Machine direction .IS 13360(Part-5/sec-1) ) |
- |
0 |
|
-- |
| 6.1, Table 1(Elongation at break ,B) Cross-machine direction..IS 13360(Part-5/sec-3) ) |
- |
0 |
|
-- |
| 6.1, Table 1(Dartimpact strength Method B of IS 13360 (Part-5/sec-6) ) |
- |
1000 |
|
-- |
| 6.1, Table 1(Tear resistence. A) Machine direction Annex B) |
- |
1000 |
|
750 + 250 (Specimen Charges) |
| 6.1, Table 1(Tear resistence. B) Transverse direction ) |
- |
750 |
|
-- |
| 7.1. Table 2(Tensile strength at break A) Machine direction IS 13360 (Part-5/sec-1) ) |
- |
1350 |
|
1100 + 250(Specimen Charges) |
| 7.1. Table 2(Tensile strength at break,B) Crosse machine direction IS 13360 (Part-5/sec-3) ) |
- |
1100 |
|
-- |
| 7.1. Table 2(Ageing test at (70-1)c for 7 days , cl 4 IS 7016 ) |
- |
4300 |
|
-- |
| 7.1. Table 2(Elongation at break , A) Machine direction IS 13360 (Part-5/sec-3) IS 13360 (Part-5/sec-1) ) |
- |
0 |
|
-- |
| 7.1. Table 2(Elongation at break , A) Transverse direction IS 13360 (Part-5/sec-3) ) |
- |
0 |
|
-- |
| 7.1. Table 2(Dart impact strenght , Method A of IS 3360 (Part-5/sec-6) ) |
- |
1000 |
|
-- |
| 8.1, Table 3(Tensile properties ,A) Yield strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do) |
- |
0 |
|
-- |
| 8.1, Table 3(Tensile properties , B) Break strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do) |
- |
0 |
|
-- |
| 8.1, Table 3(Tensile properties ,C) Yield elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do) |
- |
0 |
|
-- |
| 8.1, Table 3(Tensile properties ,D) Break elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do) |
- |
0 |
|
-- |
| 8.1, Table 3(Tear resistance , Annex B) |
- |
0 |
|
-- |
| 8.1, Table 3(Puncture resistance , Annex C) |
- |
0 |
|
-- |
| 9.1, Table 4(Tensile properties ,A) Yield strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do) |
- |
0 |
|
-- |
| 9.1, Table 4(Tensile properties , B) Break strenght . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do) |
- |
0 |
|
-- |
| 9.1, Table 4(Tensile properties ,C) Yield elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do) |
- |
0 |
|
-- |
| 9.1, Table 4(Tensile properties ,D) Break elongation . IS 3360 (Part-5/sec-1) and IS 3360 (Part-5/sec-3) Test condition- specimen type 5 and test speed 51 mm/min do) |
- |
0 |
|
-- |
| 9.1, Table 4(Tear resistance , Annex B) |
- |
0 |
|
-- |
| 9.1, Table 4(Puncture resistance , Annex C) |
- |
0 |
|
-- |
| Clause 5.2.3(Tolerance on Width) |
- |
0 |
|
-- |
|
16 May, 2028 |
-
for Type I &II only |
| 11247 |
Allumera Engineering Solutions Pvt ltd
| 8175206
| IS 455 (2015) |
Portland slag cement - Specification |
PSC |
19750 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6 - Table - 1 i(Insoluble residue - Cl 6.9 of IS 4032:1985) |
- |
2000 |
|
- |
| 6 - Table - 1 ii(Magnesia - Cl 6.8 of IS 4032:1985) |
- |
2000 |
|
- |
| 6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 6.11 of IS 4032:1985) |
- |
1600 |
|
- |
| 6 - Table - 1 iv(Sulphide sulphur (S) - Cl 6.12 of IS 4032:1985) |
- |
2000 |
|
- |
| 6 - Table - 1 v(Loss on ignition - Cl 6.2 of IS 4032:1985) |
- |
1650 |
|
- |
| 6 - Table - 1 vi(Chloride content - Cl 4.13 of IS 4032:1985) |
- |
1250 |
|
- |
| 6 - Table - 1 vii( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985) |
- |
2500 |
|
- |
| 7 Table 1 i(Fineness
IS 4031(Part 2)) |
- |
1000 |
|
- |
| 7 Table 1 ii a(Soundness, Le-Chate1ier expansion
IS 4031(Part 3) ) |
- |
1000 |
|
- |
| 7 Table 1 ii b(Soundness, Autoclave expansion
IS 4031(Part 3) ) |
- |
1600 |
|
- |
| 7 Table 1 iii a(Setting Time ( by Vicat Apparatus ),Initial
IS 4031(Part 5)) |
- |
550 |
|
- |
| 7 Table 1 iii b(Setting Time ( by Vicat Apparatus ), Final
IS 4031(Part 5)) |
- |
550 |
|
- |
| 7 Table 1 iv a(Compretsive Strenqth .72 ± 1 hr
IS 4031(Part 6)) |
- |
1450 |
|
- |
| 7 Table 1 iv b(Compretsive Strenqth 168 ± 2 hr
IS 4031(Part 6)) |
- |
1650 |
|
- |
| 7 Table 1 iv c(Compretsive Strenqth 672 ± 4 hr
IS 4031(Part 6)) |
- |
1850 |
|
- |
| 7 Table 1 v(Transverse strength (optional)
IS 4031(Part 8) ) |
- |
3500 |
|
- |
| 11.3(Consistency(IS:4031(Pt-4)-1988) |
- |
600 |
|
- |
|
13 Dec, 2026 |
-
Exclusion: Cl.7 Table-2 (v) (Transverse Strength) |
| 11248 |
Allumera Engineering Solutions Pvt ltd
| 8175206
| IS 1489 (Part 1) (2015) |
Portland pozzolana cement - Specification: Part 1 fly Ash Based |
Portland Pozzolana Cement- Fly Ash Based |
22500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7 -Table 2- i(Fineness 4031 Part 2) |
- |
1750 |
|
- |
| 7 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3) |
- |
1500 |
|
- |
| 7 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3) |
- |
1600 |
|
- |
| 7 -Table 2- iii- a(Setting Time Initial- 4031 Part 5) |
- |
1500 |
|
- |
| 7 -Table 2-iii- b(Setting Time Final- 4031 Part 5) |
- |
1500 |
|
- |
| 7 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6) |
- |
1500 |
|
- |
| 7 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6) |
- |
1650 |
|
- |
| 7 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6) |
- |
1700 |
|
- |
| 7 -Table 2- v(Transverse Strength - IS 4031 Part 8 (Optional)) |
- |
3500 |
|
- |
| 7 -Table 2- vi(Drying Shrinkage- IS 4031 Part 10) |
- |
3500 |
|
- |
| 6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985) |
- |
1200 |
|
- |
| 6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985) |
- |
1000 |
|
- |
| 6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985) |
- |
1000 |
|
- |
| 6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985) |
- |
1000 |
|
- |
| 6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985) |
- |
2000 |
|
- |
| 6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985) |
- |
1500 |
|
- |
| 11(MARKING) |
- |
500 |
|
- |
|
13 Dec, 2026 |
-
Exclusion: Cl.7 Table-2 (v) (Transverse Strength) |
| 11249 |
Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar
| 9138706
| IS 278 (2009) |
Galvanized steel barbed wire for fencing - Specification (Fourth Revision) |
- |
4500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4(Type A/Type B) |
- |
100 |
|
- |
| 5 Table-1(Sizes Diameter of Line wire) |
- |
100 |
|
- |
| 5 Table-1(Sizes Diamater of Point wire) |
- |
100 |
|
- |
| 5 Table-1(Sizes Mass of Completed barbed wire) |
- |
100 |
|
- |
| 5 Table-1(Sizes Distance between two barbs) |
- |
100 |
|
- |
| 7.1(Manufacture) |
- |
50 |
|
- |
| 7.2(Manufacture) |
- |
50 |
|
- |
| 7.3(Manufacture) |
- |
50 |
|
- |
| 8(CHROMATING) |
- |
200 |
|
- |
| 9.1(Freedom from defects) |
- |
50 |
|
- |
| 9.2(Freedom from defects) |
- |
100 |
|
- |
| 12.1(Tensile Strength) |
- |
450 |
|
- |
| 12.1(Breaking load) |
- |
450 |
|
- |
| 12.2.1(Mass of zinc coating (line wire)) |
- |
300 |
|
- |
| 12.2.2(Mass of zinc coating (point wire)) |
- |
200 |
|
- |
| 12.2(Uniformity of zinc coating) |
- |
100 |
|
- |
| 12.3(Ductility) |
- |
300 |
|
- |
| Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
100 |
|
- |
| Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
200 |
|
- |
| Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
300 |
|
- |
| Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
300 |
|
- |
| Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
300 |
|
- |
| Cl. 7.2(Cut Angle) |
- |
100 |
|
- |
| Cl. 7.2(Length of Barbs) |
- |
100 |
|
- |
| Cl. 7.2(Finishing of Barbs) |
- |
100 |
|
- |
| Cl. 7.1(General) |
- |
100 |
|
- |
| 4(Type A/Type B) |
- |
100 |
|
- |
| 5 Table-1(Sizes Diameter of Line wire) |
- |
100 |
|
- |
| 5 Table-1(Sizes Diamater of Point wire) |
- |
100 |
|
- |
| 5 Table-1(Sizes Mass of Completed barbed wire) |
- |
100 |
|
- |
| 5 Table-1(Sizes Distance between two barbs) |
- |
100 |
|
- |
| 7.1(Manufacture) |
- |
50 |
|
- |
| 7.2(Manufacture) |
- |
50 |
|
- |
| 7.3(Manufacture) |
- |
50 |
|
- |
| 8(CHROMATING) |
- |
200 |
|
- |
| 9.1(Freedom from defects) |
- |
50 |
|
- |
| 9.2(Freedom from defects) |
- |
100 |
|
- |
| 12.1(Tensile Strength) |
- |
450 |
|
- |
| 12.1(Breaking load) |
- |
450 |
|
- |
| 12.2.1(Mass of zinc coating (line wire)) |
- |
300 |
|
- |
| 12.2.2(Mass of zinc coating (point wire)) |
- |
200 |
|
- |
| 12.2(Uniformity of zinc coating) |
- |
100 |
|
- |
| 12.3(Ductility) |
- |
300 |
|
- |
| Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
100 |
|
- |
| Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
200 |
|
- |
| Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
300 |
|
- |
| Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
300 |
|
- |
| Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
300 |
|
- |
| Cl. 7.2(Cut Angle) |
- |
100 |
|
- |
| Cl. 7.2(Length of Barbs) |
- |
100 |
|
- |
| Cl. 7.2(Finishing of Barbs) |
- |
100 |
|
- |
| Cl. 7.1(General) |
- |
100 |
|
- |
| 4(Type A/Type B) |
- |
100 |
|
- |
| 5 Table-1(Sizes Diameter of Line wire) |
- |
100 |
|
- |
| 5 Table-1(Sizes Diamater of Point wire) |
- |
100 |
|
- |
| 5 Table-1(Sizes Mass of Completed barbed wire) |
- |
100 |
|
- |
| 5 Table-1(Sizes Distance between two barbs) |
- |
100 |
|
- |
| 7.1(Manufacture) |
- |
50 |
|
- |
| 7.2(Manufacture) |
- |
50 |
|
- |
| 7.3(Manufacture) |
- |
50 |
|
- |
| 8(CHROMATING) |
- |
200 |
|
- |
| 9.1(Freedom from defects) |
- |
100 |
|
- |
| 9.2(Freedom from defects) |
- |
500 |
|
- |
| 12.1(Tensile Strength) |
- |
450 |
|
- |
| 12.1(Breaking load) |
- |
450 |
|
- |
| 12.2.1(Mass of zinc coating (line wire)) |
- |
300 |
|
- |
| 12.2.2(Mass of zinc coating (point wire)) |
- |
200 |
|
- |
| 12.2(Uniformity of zinc coating) |
- |
100 |
|
- |
| 12.3(Ductility) |
- |
300 |
|
- |
| Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
100 |
|
- |
| Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
200 |
|
- |
| Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
300 |
|
- |
| Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
300 |
|
- |
| Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
300 |
|
- |
| Cl. 7.2(Cut Angle) |
- |
50 |
|
- |
| Cl. 7.2(Length of Barbs) |
- |
50 |
|
- |
| Cl. 7.2(Finishing of Barbs) |
- |
50 |
|
- |
| Cl. 7.1(General) |
- |
50 |
|
- |
| 4(Type A/Type B) |
- |
- |
|
- |
| 5 Table-1(Sizes Diameter of Line wire) |
- |
- |
|
- |
| 5 Table-1(Sizes Diamater of Point wire) |
- |
- |
|
- |
| 5 Table-1(Sizes Mass of Completed barbed wire) |
- |
- |
|
- |
| 5 Table-1(Sizes Distance between two barbs) |
- |
- |
|
- |
| 7.1(Manufacture) |
- |
- |
|
- |
| 7.2(Manufacture) |
- |
- |
|
- |
| 7.3(Manufacture) |
- |
- |
|
- |
| 8(CHROMATING) |
- |
- |
|
- |
| 9.1(Freedom from defects) |
- |
- |
|
- |
| 9.2(Freedom from defects) |
- |
- |
|
- |
| 12.1(Tensile Strength) |
- |
- |
|
- |
| 12.1(Breaking load) |
- |
- |
|
- |
| 12.2.1(Mass of zinc coating (line wire)) |
- |
- |
|
- |
| 12.2.2(Mass of zinc coating (point wire)) |
- |
- |
|
- |
| 12.2(Uniformity of zinc coating) |
- |
- |
|
- |
| 12.3(Ductility) |
- |
- |
|
- |
| Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
- |
|
- |
| Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
- |
|
- |
| Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
- |
|
- |
| Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
- |
|
- |
| Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M)(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
- |
|
- |
| Cl. 7.2(Cut Angle) |
- |
- |
|
- |
| Cl. 7.2(Length of Barbs) |
- |
- |
|
- |
| Cl. 7.2(Finishing of Barbs) |
- |
- |
|
- |
| Cl. 7.1(General) |
- |
- |
|
- |
|
31 Dec, 2026 |
-
- |
| 11250 |
DELHI TEST HOUSE, Azadhpur
| 8131406
| IS 4199 (2001) |
Toilet soap, liquid - Specification (Third Revision) |
- |
5300 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl.4.1(Description) |
- |
500 |
|
5300/- |
| Cl.4.3(Sedimentation) |
- |
800 |
|
5300/- |
| Cl.4.5.1(Phenolic substances such as cresylic acid, if added) |
- |
800 |
|
5300/- |
| Cl.4.6, 6.3.1 - Table 1 - Sl. No.i)(Total fatty matter) |
- |
800 |
|
5300/- |
| Cl.4.6, 6.3.1 - Table 1 - Sl. No.ii)(Matter insoluble in alcohol) |
- |
800 |
|
5300/- |
| Cl.4.6, 6.3.1 - Table 1 - Sl. No.iii)(Free caustic Alkali, as K2O) |
- |
800 |
|
5300/- |
| Cl.4.6, 6.3.1 - Table 1 - Sl. No.iv)(Synthetic detergent) |
- |
800 |
|
5300/- |
|
17 Jun, 2027 |
-
Included w.e.f.13-05-2022
Exclusion:
Cl 4.7.2.2 (Dermatological Safety(Requirement for ECO MARK))
Cl 4.7.2.1 (Phosphate (Requirement for ECO MARK))
Cl 4.7.2.1 (Synthetic detergent (Requirement for ECO MARK)) |
