| 11191 |
INDIAN RUBBER MATERIALS RESEARCH INSTITUTE (IRMRI)
| 7119305
| IS 12585 (1988) |
Specification for thermoplastic hoses (Textile Reinforced) for water - General purpose |
Specification for Thermoplastic Hoses For water |
7050 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 4.1(Construction) |
- |
300 |
|
-- |
| Cl 4.2(Dimensions & Tolerances) |
- |
300 |
|
-- |
| Cl 4.3.1 & Appendix A(Loss in Mass on Heating) |
- |
500 |
|
-- |
| Cl 4.3.2(Adhesion) |
- |
950 |
|
-- |
| Cl 4.3.3(Pressure Requirements) |
- |
2000 |
|
-- |
| Cl 4.3.4(Minimum Bend Radius) |
- |
1000 |
|
-- |
| Cl 4.3.5(Low Temperature Flexibility) |
- |
2000 |
|
-- |
|
- |
-
- |
| 11192 |
INDIAN RUBBER MATERIALS RESEARCH INSTITUTE (IRMRI)
| 7119305
| IS 4148 (1989) |
Surgical rubber gloves - Specification (First Revision) |
SURGICAL RUBBER GLOVES |
10850 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1.4(Manufacture) |
- |
300 |
|
-- |
| 4.2(Dimensions Fig 1 and Table 1) |
- |
300 |
|
-- |
| 4.3(Thickness) |
- |
300 |
|
-- |
| 4.4.1(Physical Properties) |
- |
950 |
|
-- |
| 4.4.2(After accelerated aging at 70 + 1OC for 240 h ) |
- |
4950 |
|
-- |
| 4.4.3(After heat ageing in autoclave) |
- |
2750 |
|
-- |
| 4.4.4(Tension Set) |
- |
800 |
|
-- |
| 4.5(pH of Aqueous Extract ) |
- |
500 |
|
-- |
|
- |
-
- |
| 11193 |
INDIAN RUBBER MATERIALS RESEARCH INSTITUTE (IRMRI)
| 7119305
| IS 10908 (1991) |
Flexible rubber tubing for liquefied petroleum gas - Specification (First Revision) |
FLEXIBLE RUBBER TUBING FOR LIQUEFIED PETROLEUM GAS |
12500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl.4.2(The walls shall be seamless and free from all visible such as lumps, blows-holes,cracks etc and the bore shall be clean and free from loose particles which might be carried forward by the gas) |
- |
100 |
|
- |
| Cl4.3.1(The tubing shall be supplied in 6.4 and 7.0 mm inisde diametre,The tolerance on nominal diamtere shall be as per table 1) |
- |
200 |
|
- |
| Cl4.3.2(it shall comply with the thickness as givien in table 1 when measured according to 4.2.2 of IS 443;1975 The readings shall be taken from different sample sections.) |
- |
200 |
|
- |
| Cl.4.4,(Cl.4.4.1)(when tested in accordance with the method given in AnnexureA. It shall fit over the standard and oversize metal nozzle shown in Fig1,2 and 3) |
- |
1300 |
|
- |
| Cl.4.4,(Cl.4.4.2)(it shall remain atatched to both nozzles throught the test period) |
- |
1300 |
|
- |
| Cl.4.5(When immersed in water for 5 minutes under an internal air pressure of 0.25 Mpa or 250kPa (2.5 bar), the increase in the outside diametre of the tubing ,Also the same shall not burst when the pressure is increasded to 0.5 Mpa or 500 kpa (5 bar0, The test shall be carried out on a lengtj of 60 cm.) |
- |
1000 |
|
- |
| Cl.4.5(When immersed in water for 5 minutes under an internal air pressure of 0.25 Mpa or 250kPa (2.5 bar), the same shall not burst when the pressure is increasded to 0.5 Mpa or 500 kpa (5 bar0, The test shall be carried out on a lengtj of 60 cm.) |
- |
1000 |
|
- |
| Cl.4.6(Shore Hardness: the hardnesss on the flatsurface of the cut/slit tubing shall be measured and the same shall be 60 ± 5˚A) |
- |
500 |
|
- |
| Cl.4.7(Accelerated Ageing test, the flexible tubing or suitable portion of the tubing shall be subjected to accelerated ageing at a temperature of 100Deg Cfor 72 hours in accordance with the method prescribed in IS 3400 (Part 4) it shall not show a change of + 10 A of its orignal shore hardness ) |
- |
1000 |
|
- |
| Cl.4.8.1(Flexible test , Annexure B The gas pressure shown on the manometre shall not drop by more than 1 Kpa) |
- |
1000 |
|
- |
| Cl4.8.2(The tubing shall be so flexible that it will make contact with a cylinder former of radius 68 mm for at least 110 deg of its circumference when the tubing is placed over the framer and a mass of 1.6 kg is attcahed to each end) |
- |
1000 |
|
- |
| Cl.4.9(Crushing test , ) |
- |
1000 |
|
- |
| Cl.4.10(Resistance to lpg ,Annexure c Shall not be more than 15 % of the initial mass of the tubing and the amount of exctractable matter shall not excced 10 percent of the iniital mass of te tubing) |
- |
2000 |
|
- |
| Cl.4.11(Resistance to Ozone ,Annexure D Shall not show any breakage on surface or crack or defects) |
- |
3000 |
|
- |
| Cl.4.12(Burning behaviour on exposure to small flame,Annexure E tubing shall not burn to either of the outer marks within the test period of 45 seconds) |
- |
1000 |
|
- |
|
- |
-
- |
| 11194 |
INDIAN RUBBER MATERIALS RESEARCH INSTITUTE (IRMRI)
| 7119305
| IS 13098 (2012) |
Automotive vehicles - Tubes for pneumatic tyres - Specification (First Revision) |
AUTOMOTIVE VEHICLES – TUBES FOR PNEUMATIC TYRES |
17800 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3/3.3(Uniformity(The Thickness shall not vary from the arithmetic mean of the readings by ± 17.5 % at any point in longitudinal direction :-Crown centre,Base centre,Side wall - 1,Side wall - 2)) |
- |
600 |
|
-- |
| 4/4.1.1(Elongation at break (Class A' Tubes)) |
- |
1900 |
|
-- |
| 4/4.1.1(Elongation at break (Class B' Tubes)) |
- |
1900 |
|
-- |
| 4/4.1.2( Strength of Splice (Class A' Tubes)) |
- |
0 |
|
-- |
| 4/4.1.2( Strength of Splice (Class B' Tubes)) |
- |
0 |
|
-- |
| 4/4.1.3 Refer annex B(Set After Ageing(Class A' Tubes)) |
- |
3600 |
|
-- |
| 4/4.1.3 Refer annex B(Set After Ageing(Class B' Tubes)) |
- |
3600 |
|
-- |
| 3/3.1 (for valve refer IS 9081)(MATERIALS, FORM AND FIT) |
- |
0 |
|
--- |
| 4/4.1.4 Refer annex C(Accelerated Ageing(Both Class A and Class B)) |
- |
3500 |
|
-- |
| 5(AIR TIGHTNESS) |
- |
600 |
|
--- |
| 6(MARKING) |
- |
600 |
|
--- |
| 3.2(Tube Material) |
- |
3800 |
|
--- |
| 3.2.1(% Rubber Hydrocarbon Content by volume) |
- |
3800 |
|
--- |
|
- |
-
- |
| 11195 |
BIS, Western Regional Laboratory (WRL)
| None
| IS 3327 (1982) |
Specification for pedal - Operated paddy threshers (First Revision) |
- |
Rs. 7950/- excluding chemical tests. View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl. No.5 ("
CONSTRUCTIONAL REQ,UIREMENTS") |
- |
|
|
|
| Cl. No.6 (DIMENSIONS) |
- |
|
|
|
| Cl. No.7 ("OTHER REQUIREMENTS
") |
- |
|
|
|
| Cl. No.8 (TESTS) |
- |
|
|
|
| Cl. No.9 (WORKMANSHIP AND FINISH) |
- |
|
|
|
| Cl. No.10 (marking) |
- |
|
|
|
|
- |
-
- |
| 11196 |
PIONEER TESTING LABORATORY PRIVATE LIMITED
| 8176806
| IS 17546 (2021) |
Chlorinated polyvinyl chloride CPVC fittings for potable hot and cold water distribution supplies Specification |
All Type |
120000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.1(Nominal Size(DN)) |
- |
200 |
|
- |
| 3.2(Nominal Outside Diameter) |
- |
200 |
|
- |
| 3.3(Mean Inside Diameter of Socket at Entry) |
- |
200 |
|
- |
| 3.4(Mean Inside Diameter of Socket at Shoulder (Bottom)) |
- |
200 |
|
- |
| 3.4(Mean Inside Diameter of Socket at Shoulder (Bottom)) |
- |
200 |
|
- |
| 3.5(Out-of-Roundness (Ovality)) |
- |
200 |
|
- |
| 3.6(Nominal Wall Thickness) |
- |
200 |
|
- |
| 3.7(Minimum Wall Thickness) |
- |
200 |
|
- |
| 3.8(Tolerance) |
- |
200 |
|
- |
| 3.9(Working Pressure) |
- |
0 |
|
- |
| 3.1(Standard Dimension Ratio) |
- |
500 |
|
- |
| 3.11(Type Tests) |
- |
15000 |
|
- |
| 3.11(Acceptance Tests) |
- |
3500 |
|
- |
| 7(Dimensions of fitting) |
- |
600 |
|
- |
| 8.2(Opacity) |
- |
1000 |
|
- |
| 8.1(Visual Appearance) |
- |
500 |
|
- |
| 8.3(Stress Relief Test) |
- |
2000 |
|
- |
| 8.4(Vicat softening Temperature) |
- |
1500 |
|
- |
| 8.5(Density) |
- |
1000 |
|
- |
| 8.6(Effect on water) |
- |
7500 |
|
- |
| 9(Mechanical Properties) |
- |
85000 |
|
- |
| 11(Marking) |
- |
400 |
|
- |
| 6(Composition) |
- |
18000 |
|
- |
|
10 Mar, 2027 |
-
- |
| 11197 |
PIONEER TESTING LABORATORY PRIVATE LIMITED
| 8176806
| IS 3589 (2001) |
Steel pipes for water and sewage (168.3 To 2540 Mm Outside Diameter) - Specification (Third Revision) |
All Type |
8400 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 8.1 Table 2 Table 3(Carbon Content IS 228) |
- |
300 |
|
- |
| 8.1 Table 2 Table 3(Carbon Content IS 228) |
- |
300 |
|
- |
| 8.1 Table 2 Table 3(Manganese Content IS 228) |
- |
300 |
|
- |
| 8.1 Table 2 Table 3(Manganese Content IS 228) |
- |
300 |
|
- |
| 8.1 Table 2 Table 3(Phosphorus Content IS 228) |
- |
300 |
|
- |
| 8.1 Table 2 Table 3(Sulphur Content IS 228) |
- |
300 |
|
- |
| 9.3(Guided bend test(For SAW Pipes)) |
- |
500 |
|
- |
| 10(Hydaulic pressure test) |
- |
1500 |
|
- |
| 11.1, Table 5.(Outside Diameter (OD)) |
- |
500 |
|
- |
| 11.1, Table 5.(Thickness) |
- |
500 |
|
- |
| 11.1, Table 5.(Mass) |
- |
400 |
|
- |
| 12.3.3(Ovality) |
- |
500 |
|
- |
| 12.5(Strightness) |
- |
500 |
|
- |
| 14.1(Visual inspection, Appearance and Workmanship) |
- |
500 |
|
- |
| 14.2(Visual inspection, Appearance and Workmanship) |
- |
500 |
|
- |
| 14.3(Visual inspection, Appearance and Workmanship) |
- |
500 |
|
- |
| 14.4(Visual inspection, Appearance and Workmanship-Dent Depth(below 610 mm OD)) |
- |
500 |
|
- |
| 14.4(Visual inspection, Appearance and Workmanship-Dent Depth(Above 610 mm OD)) |
- |
500 |
|
- |
| 14.4(Visual inspection, Appearance and Workmanship-Dent Length) |
- |
500 |
|
- |
| 14.4(Visual inspection, Appearance and Workmanship-Dent Length) |
- |
500 |
|
- |
| 8.1(CE) |
- |
300 |
|
- |
| 9.3(Guided Bend Test
(for SAW Pipes)) |
- |
500 |
|
- |
| 9.2.3(Flattening Test for
seamless pipes) |
- |
500 |
|
- |
| 9.2.1(Flattening test for
ERW pipes ) |
- |
500 |
|
- |
| 9.1(Tensile test-Yield Strength) |
- |
1000 |
|
- |
| 9.1(Tensile test-Strength) |
- |
1000 |
|
- |
| 9.1(Tensile test- Elongation) |
- |
1000 |
|
- |
| 18(Marking) |
- |
200 |
|
- |
|
10 Mar, 2027 |
-
- |
| 11198 |
Nemko India (Test Lab) Pvt. Ltd., Faridabad
| 8138426
| IS 13450 : Part 1 : SEC 2 (2018) |
Medical electrical equipment: Part 1 general requirements for the basic safety and essential performance: Sec 2 collateral standard: electromagnetic disturbances - Requirements and tests (First Revision) |
- |
248000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1(RISK MANAGEMENT PROCESS for ME EQUIPMENT and ME SYSTEMS) |
- |
0 |
|
- |
| 4.1(RISK MANAGEMENT PROCESS for ME EQUIPMENT and ME SYSTEMS) |
- |
0 |
|
- |
| 4.2(Non-ME EQUIPMENT used in an ME SYSTEM) |
- |
0 |
|
- |
| 4.3(General test conditions) |
- |
0 |
|
- |
| 5(ME EQUIPMENT and ME SYSTEMS identification, marking and documents) |
- |
0 |
|
- |
| 6(Documentation of the tests) |
- |
0 |
|
- |
| 7.1(Protection of radio services and other equipment) |
- |
60000 |
|
- |
| 7.2(Protection of the PUBLIC MAINS NETWORK) |
- |
30000 |
|
- |
| 8.1(General) |
- |
0 |
|
- |
| 8.2(PATIENT physiological simulation) |
- |
0 |
|
- |
| 8.3(Termination of PATIENT-COUPLED parts) |
- |
0 |
|
- |
| 8.4(HAND-HELD ME EQUIPMENT and parts intended to be HAND-HELD) |
- |
0 |
|
- |
| 8.5(Subsystems) |
- |
0 |
|
- |
| 8.6(PERMANENTLY INSTALLED LARGE ME EQUIPMENT and LARGE ME SYSTEMS) |
- |
0 |
|
- |
| 8.7(Operating modes) |
- |
0 |
|
- |
| 8.9(IMMUNITY TEST LEVELS) |
- |
0 |
|
- |
| 8.10(IMMUNITY to proximity fields from RF wireless communications equipment) |
- |
10000 |
|
- |
| 9(Test report) |
- |
0 |
|
- |
| Table 4(ELECTROSTATIC DISCHARGE) |
- |
6000 |
|
- |
| Table 4(Radiated RF EM fields) |
- |
30000 |
|
- |
| Table 4(Proximity fields from RF wireless communications equipment) |
- |
10000 |
|
- |
| Table 4(RATED power frequency magnetic fields d)e)) |
- |
10000 |
|
- |
| Table 5(Electrical fast transients / bursts) |
- |
6000 |
|
- |
| Table 5(Surges line-to-line) |
- |
6000 |
|
- |
| Table 5(Surges line-to-ground) |
- |
6000 |
|
- |
| Table 6(Surges line-to-line) |
- |
6000 |
|
- |
| Table 6(Surges line-to-ground) |
- |
6000 |
|
- |
| Table 8(Surges line-to-ground) |
- |
6000 |
|
- |
| Table 5(Conducted disturbances induced by RF fields) |
- |
5000 |
|
- |
| Table 6(Conducted disturbances induced by RF fields) |
- |
5000 |
|
- |
| Table 7(Conducted disturbances induced by RF fields) |
- |
5000 |
|
- |
| Table 5(Voltage dips) |
- |
6000 |
|
- |
| Table 5(Voltage interruptions) |
- |
6000 |
|
- |
| Table 6(Electrical fast transients / bursts) |
- |
6000 |
|
- |
| Table 8(Electrical fast transients / bursts) |
- |
6000 |
|
- |
| Table 8(Conducted disturbances induced by RF fields) |
- |
5000 |
|
- |
| Table 7(ELECTROSTATIC DISCHARGE) |
- |
6000 |
|
- |
| Table 8(ELECTROSTATIC DISCHARGE) |
- |
6000 |
|
- |
| 8.8(Non-ME EQUIPMENT) |
- |
0 |
|
- |
| 4.1(RISK MANAGEMENT PROCESS for ME EQUIPMENT and ME SYSTEMS) |
- |
0 |
|
Repeated entry |
| 4.2(Non-ME EQUIPMENT used in an ME SYSTEM) |
- |
0 |
|
Repeated entry |
| 4.3(General test conditions) |
- |
0 |
|
Repeated entry |
| 5(ME EQUIPMENT and ME SYSTEMS identification, marking and documents) |
- |
0 |
|
Repeated entry |
| 6(Documentation of the tests) |
- |
0 |
|
Repeated entry |
| 7.1(Protection of radio services and other equipment) |
- |
0 |
|
Repeated entry |
| 7.2(Protection of the PUBLIC MAINS NETWORK) |
- |
0 |
|
Repeated entry |
| 8.1(General) |
- |
0 |
|
Repeated entry |
| 8.2(PATIENT physiological simulation) |
- |
0 |
|
Repeated entry |
| 8.3(Termination of PATIENT-COUPLED parts) |
- |
0 |
|
Repeated entry |
| 8.4(HAND-HELD ME EQUIPMENT and parts intended to be HAND-HELD) |
- |
0 |
|
Repeated entry |
| 8.5(Subsystems) |
- |
0 |
|
Repeated entry |
| 8.6(PERMANENTLY INSTALLED LARGE ME EQUIPMENT and LARGE ME SYSTEMS) |
- |
0 |
|
Repeated entry |
| 8.7(Operating modes) |
- |
0 |
|
Repeated entry |
| 8.9(IMMUNITY TEST LEVELS) |
- |
0 |
|
Repeated entry |
| 8.10(IMMUNITY to proximity fields from RF wireless communications equipment) |
- |
0 |
|
Repeated entry |
| 9(Test report) |
- |
0 |
|
Repeated entry |
| Table 4(ELECTROSTATIC DISCHARGE) |
- |
0 |
|
Repeated entry |
| Table 4(Radiated RF EM fields) |
- |
0 |
|
Repeated entry |
| Table 4(Proximity fields from RF wireless communications equipment) |
- |
0 |
|
Repeated entry |
| Table 4(RATED power frequency magnetic fields d)e)) |
- |
0 |
|
Repeated entry |
| Table 5(Electrical fast transients / bursts) |
- |
0 |
|
Repeated entry |
| Table 5(Surges line-to-line) |
- |
0 |
|
Repeated entry |
| Table 5(Surges line-to-ground) |
- |
0 |
|
Repeated entry |
| Table 6(Surges line-to-line) |
- |
0 |
|
Repeated entry |
| Table 6(Surges line-to-ground) |
- |
0 |
|
Repeated entry |
| Table 8(Surges line-to-ground) |
- |
0 |
|
Repeated entry |
| Table 5(Conducted disturbances induced by RF fields) |
- |
0 |
|
Repeated entry |
| Table 6(Conducted disturbances induced by RF fields) |
- |
0 |
|
Repeated entry |
| Table 7(Conducted disturbances induced by RF fields) |
- |
0 |
|
Repeated entry |
| Table 5(Voltage dips) |
- |
0 |
|
Repeated entry |
| Table 5(Voltage interruptions) |
- |
0 |
|
Repeated entry |
| Table 6(Electrical fast transients / bursts) |
- |
0 |
|
Repeated entry |
| Table 8(Electrical fast transients / bursts) |
- |
0 |
|
Repeated entry |
| Table 8(Conducted disturbances induced by RF fields) |
- |
0 |
|
Repeated entry |
| Table 7(ELECTROSTATIC DISCHARGE) |
- |
0 |
|
Repeated entry |
| Table 8(ELECTROSTATIC DISCHARGE) |
- |
0 |
|
Repeated entry |
| 8.8(Non-ME EQUIPMENT) |
- |
0 |
|
Repeated entry |
| 4.1(RISK MANAGEMENT PROCESS for ME EQUIPMENT and ME SYSTEMS) |
- |
0 |
|
Repeated entry |
| 4.2(Non-ME EQUIPMENT used in an ME SYSTEM) |
- |
0 |
|
Repeated entry |
| 4.3(General test conditions) |
- |
0 |
|
Repeated entry |
| 5(ME EQUIPMENT and ME SYSTEMS identification, marking and documents) |
- |
0 |
|
Repeated entry |
| 6(Documentation of the tests) |
- |
0 |
|
Repeated entry |
| 7.1(Protection of radio services and other equipment) |
- |
0 |
|
Repeated entry |
| 7.2(Protection of the PUBLIC MAINS NETWORK) |
- |
0 |
|
Repeated entry |
| 8.1(General) |
- |
0 |
|
Repeated entry |
| 8.2(PATIENT physiological simulation) |
- |
0 |
|
Repeated entry |
| 8.3(Termination of PATIENT-COUPLED parts) |
- |
0 |
|
Repeated entry |
| 8.4(HAND-HELD ME EQUIPMENT and parts intended to be HAND-HELD) |
- |
0 |
|
Repeated entry |
| 8.5(Subsystems) |
- |
0 |
|
Repeated entry |
| 8.6(PERMANENTLY INSTALLED LARGE ME EQUIPMENT and LARGE ME SYSTEMS) |
- |
0 |
|
Repeated entry |
| 8.7(Operating modes) |
- |
0 |
|
Repeated entry |
| 8.9(IMMUNITY TEST LEVELS) |
- |
0 |
|
Repeated entry |
| 8.10(IMMUNITY to proximity fields from RF wireless communications equipment) |
- |
0 |
|
Repeated entry |
| 9(Test report) |
- |
0 |
|
Repeated entry |
| Table 4(ELECTROSTATIC DISCHARGE) |
- |
0 |
|
Repeated entry |
| Table 4(Radiated RF EM fields) |
- |
0 |
|
Repeated entry |
| Table 4(Proximity fields from RF wireless communications equipment) |
- |
0 |
|
Repeated entry |
| Table 4(RATED power frequency magnetic fields d)e)) |
- |
0 |
|
Repeated entry |
| Table 5(Electrical fast transients / bursts) |
- |
0 |
|
Repeated entry |
| Table 5(Surges line-to-line) |
- |
0 |
|
Repeated entry |
| Table 5(Surges line-to-ground) |
- |
0 |
|
Repeated entry |
| Table 6(Surges line-to-line) |
- |
0 |
|
Repeated entry |
| Table 6(Surges line-to-ground) |
- |
0 |
|
Repeated entry |
| Table 8(Surges line-to-ground) |
- |
0 |
|
Repeated entry |
| Table 5(Conducted disturbances induced by RF fields) |
- |
0 |
|
Repeated entry |
| Table 6(Conducted disturbances induced by RF fields) |
- |
0 |
|
Repeated entry |
| Table 7(Conducted disturbances induced by RF fields) |
- |
0 |
|
Repeated entry |
| Table 5(Voltage dips) |
- |
0 |
|
Repeated entry |
| Table 5(Voltage interruptions) |
- |
0 |
|
Repeated entry |
| Table 6(Electrical fast transients / bursts) |
- |
0 |
|
Repeated entry |
| Table 8(Electrical fast transients / bursts) |
- |
0 |
|
Repeated entry |
| Table 8(Conducted disturbances induced by RF fields) |
- |
0 |
|
Repeated entry |
| Table 7(ELECTROSTATIC DISCHARGE) |
- |
0 |
|
Repeated entry |
| Table 8(ELECTROSTATIC DISCHARGE) |
- |
0 |
|
Repeated entry |
| 8.8(Non-ME EQUIPMENT) |
- |
0 |
|
Repeated entry |
|
31 Dec, 2026 |
-
Included w.e.f 12.03.2025
Exclusion: Table 6 (Electrical transient conduction along supply lines) |
| 11199 |
Bharat Test House Pvt. Ltd. 1668 Sonipat
| 9168306
| IS 12067 (2023) |
Palm fatty acids - Specification (first revision of IS 12067) |
Palm Fatty Acids |
15190 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1&4.2(Description) |
- |
990 |
|
5% discount for BIS |
| Cl.4.3 (i)(Moisture - 6 of IS 548 (Part 1/Sec 2)) |
- |
800 |
|
5% discount for BIS |
| Cl. 4.3 (ii)(Saponification Value - 16 of IS 548 (Part 1/Sec 2)) |
- |
1200 |
|
5% discount for BIS |
| Cl. 4.3 (iii)(Acid Value - 8 of IS 548 (Part 1/Sec 2)) |
- |
1000 |
|
5% discount for BIS |
| Cl. 4.3 (iv)(Iodine Value - 15 of IS 548 (Part 1/Sec 2)) |
- |
1400 |
|
5% discount for BIS |
| Cl. 4.3 (v)(Mineral Acidity - ANNEX A2 of IS 12067:2023) |
- |
1200 |
|
5% discount for BIS |
| Cl. 4.3 (vi)(Ash - ANNEX A1 of IS 12067:2023) |
- |
800 |
|
5% discount for BIS |
| Cl. 4.3 (vii)(Unsaponifiable matter - 9 of IS 548 (Part 1/ Sec 2)) |
- |
1500 |
|
5% discount for BIS |
| Cl. 4.3 (viii)(Titre Test - 13 of IS 548 (Part 1/Sec 2)) |
- |
1500 |
|
5% discount for BIS |
| Cl. 4.3 (ix)(Colour - 14.1 of IS 548 (Part 1/Sec 2)) |
- |
2000 |
|
5% discount for BIS |
| Cl. 4.3 (x)(Flash point - IS 1448 (Part 21)) |
- |
800 |
|
5% discount for BIS |
| Cl. 4.4(Fatty Acid Composition of Palm Fatty Acids) |
- |
2000 |
|
5% discount for BIS |
| 4.1&4.2(Description) |
- |
0 |
|
- |
| Cl.4.3 (i)(Moisture - 6 of IS 548 (Part 1/Sec 2)) |
- |
0 |
|
- |
| Cl. 4.3 (ii)(Saponification Value - 16 of IS 548 (Part 1/Sec 2)) |
- |
0 |
|
- |
| Cl. 4.3 (iii)(Acid Value - 8 of IS 548 (Part 1/Sec 2)) |
- |
0 |
|
- |
| Cl. 4.3 (iv)(Iodine Value - 15 of IS 548 (Part 1/Sec 2)) |
- |
0 |
|
- |
| Cl. 4.3 (v)(Mineral Acidity - ANNEX A2 of IS 12067:2023) |
- |
0 |
|
- |
| Cl. 4.3 (vi)(Ash - ANNEX A1 of IS 12067:2023) |
- |
0 |
|
- |
| Cl. 4.3 (vii)(Unsaponifiable matter - 9 of IS 548 (Part 1/ Sec 2)) |
- |
0 |
|
- |
| Cl. 4.3 (viii)(Titre Test - 13 of IS 548 (Part 1/Sec 2)) |
- |
0 |
|
- |
| Cl. 4.3 (ix)(Colour - 14.1 of IS 548 (Part 1/Sec 2)) |
- |
0 |
|
- |
| Cl. 4.3 (x)(Flash point - IS 1448 (Part 21)) |
- |
0 |
|
- |
| Cl. 4.4(Fatty Acid Composition of Palm Fatty Acids) |
- |
0 |
|
- |
| 4.1(Description - IS 12067:2023) |
- |
0 |
|
- |
| 4.2(Description - IS 12067:2023) |
- |
0 |
|
- |
| 4.3, Table 1 (i)(Moisture - IS 548 (Part 1/Sec 2) : 2021) |
- |
0 |
|
- |
| 4.3, Table 1 (ii)(Saponification - IS 548 (Part 1/Sec 2) : 2021) |
- |
0 |
|
- |
| 4.3, Table 1 (iii)(Acid value shall not differ from saponification value - IS 548 (Part 1/Sec 2) : 2021) |
- |
0 |
|
- |
| 4.3, Table 1 (iv)(Iodine Value - IS 548 (Part 1/Sec 2) : 2021) |
- |
0 |
|
- |
| 4.3, Table 1 (v)(Mineral Acidity - IS 12067:1987) |
- |
0 |
|
- |
| 4.3, Table 1 (vi)(Ash - IS 12067:1987) |
- |
0 |
|
- |
| 4.3, Table 1 (vii)(Unsaponifiable matter - IS 548 (Part 1/Sec 2) : 2021) |
- |
0 |
|
- |
| 4.3, Table 1 (viii)(Titre - IS 548 (Part 1/Sec 2) : 2021) |
- |
0 |
|
- |
| 4.3, Table 1 (ix)(Colour, 1-inch cell, Y +5R) |
- |
0 |
|
- |
| 4.3, Table 1 (x)(Flash Point - IS 1448 (P-21)) |
- |
0 |
|
- |
| 4.4, Table 2 (i)(C6 : 0) |
- |
0 |
|
- |
| 4.4, Table 2 (ii)(C8 : 0) |
- |
0 |
|
- |
| 4.4, Table 2 (iii)(C10 : 0) |
- |
0 |
|
- |
| 4.4, Table 2 (iv)(C12 : 0) |
- |
0 |
|
- |
| 4.4, Table 2 (v)(C14 : 0) |
- |
0 |
|
- |
| 4.4, Table 2 (vi)(C16 : 0) |
- |
0 |
|
- |
| 4.4, Table 2 (vii)(C16 :1) |
- |
0 |
|
- |
| 4.4, Table 2 (viii)(C17 : 0) |
- |
0 |
|
- |
| 4.4, Table 2 (ix)(C17 : 1) |
- |
0 |
|
- |
| 4.4, Table 2 (x)(C18 : 0) |
- |
0 |
|
- |
| 4.4, Table 2 (xi)(C18 : 1) |
- |
0 |
|
- |
| 4.4, Table 2 (xii)(C18 : 2) |
- |
0 |
|
- |
| 4.4, Table 2 (xiii)(C18 : 3) |
- |
0 |
|
- |
| 4.4, Table 2 (xiv)(C20 : 0) |
- |
0 |
|
- |
| 4.4, Table 2 (xv)(C20 : 1) |
- |
0 |
|
- |
| 4.4, Table 2 (xvi)(C20 : 2) |
- |
0 |
|
- |
| 4.4, Table 2 (xvii)(C22 : 0) |
- |
0 |
|
- |
| 4.4, Table 2 (xviii)(C22 : 1) |
- |
0 |
|
- |
| 4.4, Table 2 (xix)(C22 : 2) |
- |
0 |
|
- |
| 4.4, Table 2 (xx)(C24 : 0) |
- |
0 |
|
- |
| 4.4, Table 2 (xxi)(C24 : 1) |
- |
0 |
|
- |
| 4.1&4.2(Description) |
- |
0 |
|
- |
| Cl.4.3 (i)(Moisture - 6 of IS 548 (Part 1/Sec 2)) |
- |
0 |
|
- |
| Cl. 4.3 (ii)(Saponification Value - 16 of IS 548 (Part 1/Sec 2)) |
- |
0 |
|
- |
| Cl. 4.3 (iii)(Acid Value - 8 of IS 548 (Part 1/Sec 2)) |
- |
0 |
|
- |
| Cl. 4.3 (iv)(Iodine Value - 15 of IS 548 (Part 1/Sec 2)) |
- |
0 |
|
- |
| Cl. 4.3 (v)(Mineral Acidity - ANNEX A2 of IS 12067:2023) |
- |
0 |
|
- |
| Cl. 4.3 (vi)(Ash - ANNEX A1 of IS 12067:2023) |
- |
0 |
|
- |
| Cl. 4.3 (vii)(Unsaponifiable matter - 9 of IS 548 (Part 1/ Sec 2)) |
- |
0 |
|
- |
| Cl. 4.3 (viii)(Titre Test - 13 of IS 548 (Part 1/Sec 2)) |
- |
0 |
|
- |
| Cl. 4.3 (ix)(Colour - 14.1 of IS 548 (Part 1/Sec 2)) |
- |
0 |
|
- |
| Cl. 4.3 (x)(Flash point - IS 1448 (Part 21)) |
- |
0 |
|
- |
| Cl. 4.4(Fatty Acid Composition of Palm Fatty Acids) |
- |
0 |
|
- |
| 4.1(Description - IS 12067:2023) |
- |
0 |
|
- |
| 4.2(Description - IS 12067:2023) |
- |
0 |
|
- |
| 4.3, Table 1 (i)(Moisture - IS 548 (Part 1/Sec 2) : 2021) |
- |
0 |
|
- |
| 4.3, Table 1 (ii)(Saponification - IS 548 (Part 1/Sec 2) : 2021) |
- |
0 |
|
- |
| 4.3, Table 1 (iii)(Acid value shall not differ from saponification value - IS 548 (Part 1/Sec 2) : 2021) |
- |
0 |
|
- |
| 4.3, Table 1 (iv)(Iodine Value - IS 548 (Part 1/Sec 2) : 2021) |
- |
0 |
|
- |
| 4.3, Table 1 (v)(Mineral Acidity - IS 12067:1987) |
- |
0 |
|
- |
| 4.3, Table 1 (vi)(Ash - IS 12067:1987) |
- |
0 |
|
- |
| 4.3, Table 1 (vii)(Unsaponifiable matter - IS 548 (Part 1/Sec 2) : 2021) |
- |
0 |
|
- |
| 4.3, Table 1 (viii)(Titre - IS 548 (Part 1/Sec 2) : 2021) |
- |
0 |
|
- |
| 4.3, Table 1 (ix)(Colour, 1-inch cell, Y +5R) |
- |
0 |
|
- |
| 4.3, Table 1 (x)(Flash Point - IS 1448 (P-21)) |
- |
0 |
|
- |
| 4.4, Table 2 (i)(C6 : 0) |
- |
0 |
|
- |
| 4.4, Table 2 (ii)(C8 : 0) |
- |
0 |
|
- |
| 4.4, Table 2 (iii)(C10 : 0) |
- |
0 |
|
- |
| 4.4, Table 2 (iv)(C12 : 0) |
- |
0 |
|
- |
| 4.4, Table 2 (v)(C14 : 0) |
- |
0 |
|
- |
| 4.4, Table 2 (vi)(C16 : 0) |
- |
0 |
|
- |
| 4.4, Table 2 (vii)(C16 :1) |
- |
0 |
|
- |
| 4.4, Table 2 (viii)(C17 : 0) |
- |
0 |
|
- |
| 4.4, Table 2 (ix)(C17 : 1) |
- |
0 |
|
- |
| 4.4, Table 2 (x)(C18 : 0) |
- |
0 |
|
- |
| 4.4, Table 2 (xi)(C18 : 1) |
- |
0 |
|
- |
| 4.4, Table 2 (xii)(C18 : 2) |
- |
0 |
|
- |
| 4.4, Table 2 (xiii)(C18 : 3) |
- |
0 |
|
- |
| 4.4, Table 2 (xiv)(C20 : 0) |
- |
0 |
|
- |
| 4.4, Table 2 (xv)(C20 : 1) |
- |
0 |
|
- |
| 4.4, Table 2 (xvi)(C20 : 2) |
- |
0 |
|
- |
| 4.4, Table 2 (xvii)(C22 : 0) |
- |
0 |
|
- |
| 4.4, Table 2 (xviii)(C22 : 1) |
- |
0 |
|
- |
| 4.4, Table 2 (xix)(C22 : 2) |
- |
0 |
|
- |
| 4.4, Table 2 (xx)(C24 : 0) |
- |
0 |
|
- |
| 4.4, Table 2 (xxi)(C24 : 1) |
- |
0 |
|
- |
| 4.1&4.2(Description) |
- |
0 |
|
- |
| Cl.4.3 (i)(Moisture - 6 of IS 548 (Part 1/Sec 2)) |
- |
0 |
|
- |
| Cl. 4.3 (ii)(Saponification Value - 16 of IS 548 (Part 1/Sec 2)) |
- |
0 |
|
- |
| Cl. 4.3 (iii)(Acid Value - 8 of IS 548 (Part 1/Sec 2)) |
- |
0 |
|
- |
| Cl. 4.3 (iv)(Iodine Value - 15 of IS 548 (Part 1/Sec 2)) |
- |
0 |
|
- |
| Cl. 4.3 (v)(Mineral Acidity - ANNEX A2 of IS 12067:2023) |
- |
0 |
|
- |
| Cl. 4.3 (vi)(Ash - ANNEX A1 of IS 12067:2023) |
- |
0 |
|
- |
| Cl. 4.3 (vii)(Unsaponifiable matter - 9 of IS 548 (Part 1/ Sec 2)) |
- |
0 |
|
- |
| Cl. 4.3 (viii)(Titre Test - 13 of IS 548 (Part 1/Sec 2)) |
- |
0 |
|
- |
| Cl. 4.3 (ix)(Colour - 14.1 of IS 548 (Part 1/Sec 2)) |
- |
0 |
|
- |
| Cl. 4.3 (x)(Flash point - IS 1448 (Part 21)) |
- |
0 |
|
- |
| Cl. 4.4(Fatty Acid Composition of Palm Fatty Acids) |
- |
0 |
|
- |
| 4.1(Description - IS 12067:2023) |
- |
0 |
|
- |
| 4.2(Description - IS 12067:2023) |
- |
0 |
|
- |
| 4.3, Table 1 (i)(Moisture - IS 548 (Part 1/Sec 2) : 2021) |
- |
0 |
|
- |
| 4.3, Table 1 (ii)(Saponification - IS 548 (Part 1/Sec 2) : 2021) |
- |
0 |
|
- |
| 4.3, Table 1 (iii)(Acid value shall not differ from saponification value - IS 548 (Part 1/Sec 2) : 2021) |
- |
0 |
|
- |
| 4.3, Table 1 (iv)(Iodine Value - IS 548 (Part 1/Sec 2) : 2021) |
- |
0 |
|
- |
| 4.3, Table 1 (v)(Mineral Acidity - IS 12067:1987) |
- |
0 |
|
- |
| 4.3, Table 1 (vi)(Ash - IS 12067:1987) |
- |
0 |
|
- |
| 4.3, Table 1 (vii)(Unsaponifiable matter - IS 548 (Part 1/Sec 2) : 2021) |
- |
0 |
|
- |
| 4.3, Table 1 (viii)(Titre - IS 548 (Part 1/Sec 2) : 2021) |
- |
0 |
|
- |
| 4.3, Table 1 (ix)(Colour, 1-inch cell, Y +5R) |
- |
0 |
|
- |
| 4.3, Table 1 (x)(Flash Point - IS 1448 (P-21)) |
- |
0 |
|
- |
| 4.4, Table 2 (i)(C6 : 0) |
- |
0 |
|
- |
| 4.4, Table 2 (ii)(C8 : 0) |
- |
0 |
|
- |
| 4.4, Table 2 (iii)(C10 : 0) |
- |
0 |
|
- |
| 4.4, Table 2 (iv)(C12 : 0) |
- |
0 |
|
- |
| 4.4, Table 2 (v)(C14 : 0) |
- |
0 |
|
- |
| 4.4, Table 2 (vi)(C16 : 0) |
- |
0 |
|
- |
| 4.4, Table 2 (vii)(C16 :1) |
- |
0 |
|
- |
| 4.4, Table 2 (viii)(C17 : 0) |
- |
0 |
|
- |
| 4.4, Table 2 (ix)(C17 : 1) |
- |
0 |
|
- |
| 4.4, Table 2 (x)(C18 : 0) |
- |
0 |
|
- |
| 4.4, Table 2 (xi)(C18 : 1) |
- |
0 |
|
- |
| 4.4, Table 2 (xii)(C18 : 2) |
- |
0 |
|
- |
| 4.4, Table 2 (xiii)(C18 : 3) |
- |
0 |
|
- |
| 4.4, Table 2 (xiv)(C20 : 0) |
- |
0 |
|
- |
| 4.4, Table 2 (xv)(C20 : 1) |
- |
0 |
|
- |
| 4.4, Table 2 (xvi)(C20 : 2) |
- |
0 |
|
- |
| 4.4, Table 2 (xvii)(C22 : 0) |
- |
0 |
|
- |
| 4.4, Table 2 (xviii)(C22 : 1) |
- |
0 |
|
- |
| 4.4, Table 2 (xix)(C22 : 2) |
- |
0 |
|
- |
| 4.4, Table 2 (xx)(C24 : 0) |
- |
0 |
|
- |
| 4.4, Table 2 (xxi)(C24 : 1) |
- |
0 |
|
- |
| 4.1&4.2(Description) |
- |
0 |
|
- |
| Cl.4.3 (i)(Moisture - 6 of IS 548 (Part 1/Sec 2)) |
- |
0 |
|
- |
| Cl. 4.3 (ii)(Saponification Value - 16 of IS 548 (Part 1/Sec 2)) |
- |
0 |
|
- |
| Cl. 4.3 (iii)(Acid Value - 8 of IS 548 (Part 1/Sec 2)) |
- |
0 |
|
- |
| Cl. 4.3 (iv)(Iodine Value - 15 of IS 548 (Part 1/Sec 2)) |
- |
0 |
|
- |
| Cl. 4.3 (v)(Mineral Acidity - ANNEX A2 of IS 12067:2023) |
- |
0 |
|
- |
| Cl. 4.3 (vi)(Ash - ANNEX A1 of IS 12067:2023) |
- |
0 |
|
- |
| Cl. 4.3 (vii)(Unsaponifiable matter - 9 of IS 548 (Part 1/ Sec 2)) |
- |
0 |
|
- |
| Cl. 4.3 (viii)(Titre Test - 13 of IS 548 (Part 1/Sec 2)) |
- |
0 |
|
- |
| Cl. 4.3 (ix)(Colour - 14.1 of IS 548 (Part 1/Sec 2)) |
- |
0 |
|
- |
| Cl. 4.3 (x)(Flash point - IS 1448 (Part 21)) |
- |
0 |
|
- |
| Cl. 4.4(Fatty Acid Composition of Palm Fatty Acids) |
- |
0 |
|
- |
| 4.1(Description - IS 12067:2023) |
- |
0 |
|
- |
| 4.2(Description - IS 12067:2023) |
- |
0 |
|
- |
| 4.3, Table 1 (i)(Moisture - IS 548 (Part 1/Sec 2) : 2021) |
- |
0 |
|
- |
| 4.3, Table 1 (ii)(Saponification - IS 548 (Part 1/Sec 2) : 2021) |
- |
0 |
|
- |
| 4.3, Table 1 (iii)(Acid value shall not differ from saponification value - IS 548 (Part 1/Sec 2) : 2021) |
- |
0 |
|
- |
| 4.3, Table 1 (iv)(Iodine Value - IS 548 (Part 1/Sec 2) : 2021) |
- |
0 |
|
- |
| 4.3, Table 1 (v)(Mineral Acidity - IS 12067:1987) |
- |
0 |
|
- |
| 4.3, Table 1 (vi)(Ash - IS 12067:1987) |
- |
0 |
|
- |
| 4.3, Table 1 (vii)(Unsaponifiable matter - IS 548 (Part 1/Sec 2) : 2021) |
- |
0 |
|
- |
| 4.3, Table 1 (viii)(Titre - IS 548 (Part 1/Sec 2) : 2021) |
- |
0 |
|
- |
| 4.3, Table 1 (ix)(Colour, 1-inch cell, Y +5R) |
- |
0 |
|
- |
| 4.3, Table 1 (x)(Flash Point - IS 1448 (P-21)) |
- |
0 |
|
- |
| 4.4, Table 2 (i)(C6 : 0) |
- |
0 |
|
- |
| 4.4, Table 2 (ii)(C8 : 0) |
- |
0 |
|
- |
| 4.4, Table 2 (iii)(C10 : 0) |
- |
0 |
|
- |
| 4.4, Table 2 (iv)(C12 : 0) |
- |
0 |
|
- |
| 4.4, Table 2 (v)(C14 : 0) |
- |
0 |
|
- |
| 4.4, Table 2 (vi)(C16 : 0) |
- |
0 |
|
- |
| 4.4, Table 2 (vii)(C16 :1) |
- |
0 |
|
- |
| 4.4, Table 2 (viii)(C17 : 0) |
- |
0 |
|
- |
| 4.4, Table 2 (ix)(C17 : 1) |
- |
0 |
|
- |
| 4.4, Table 2 (x)(C18 : 0) |
- |
0 |
|
- |
| 4.4, Table 2 (xi)(C18 : 1) |
- |
0 |
|
- |
| 4.4, Table 2 (xii)(C18 : 2) |
- |
0 |
|
- |
| 4.4, Table 2 (xiii)(C18 : 3) |
- |
0 |
|
- |
| 4.4, Table 2 (xiv)(C20 : 0) |
- |
0 |
|
- |
| 4.4, Table 2 (xv)(C20 : 1) |
- |
0 |
|
- |
| 4.4, Table 2 (xvi)(C20 : 2) |
- |
0 |
|
- |
| 4.4, Table 2 (xvii)(C22 : 0) |
- |
0 |
|
- |
| 4.4, Table 2 (xviii)(C22 : 1) |
- |
0 |
|
- |
| 4.4, Table 2 (xix)(C22 : 2) |
- |
0 |
|
- |
| 4.4, Table 2 (xx)(C24 : 0) |
- |
0 |
|
- |
| 4.4, Table 2 (xxi)(C24 : 1) |
- |
0 |
|
- |
| 4.1&4.2(Description) |
- |
- |
|
- |
| Cl.4.3 (i)(Moisture - 6 of IS 548 (Part 1/Sec 2)) |
- |
- |
|
- |
| Cl. 4.3 (ii)(Saponification Value - 16 of IS 548 (Part 1/Sec 2)) |
- |
- |
|
- |
| Cl. 4.3 (iii)(Acid Value - 8 of IS 548 (Part 1/Sec 2)) |
- |
- |
|
- |
| Cl. 4.3 (iv)(Iodine Value - 15 of IS 548 (Part 1/Sec 2)) |
- |
- |
|
- |
| Cl. 4.3 (v)(Mineral Acidity - ANNEX A2 of IS 12067:2023) |
- |
- |
|
- |
| Cl. 4.3 (vi)(Ash - ANNEX A1 of IS 12067:2023) |
- |
- |
|
- |
| Cl. 4.3 (vii)(Unsaponifiable matter - 9 of IS 548 (Part 1/ Sec 2)) |
- |
- |
|
- |
| Cl. 4.3 (viii)(Titre Test - 13 of IS 548 (Part 1/Sec 2)) |
- |
- |
|
- |
| Cl. 4.3 (ix)(Colour - 14.1 of IS 548 (Part 1/Sec 2)) |
- |
- |
|
- |
| Cl. 4.3 (x)(Flash point - IS 1448 (Part 21)) |
- |
- |
|
- |
| Cl. 4.4(Fatty Acid Composition of Palm Fatty Acids) |
- |
- |
|
- |
| 4.1(Description - IS 12067:2023) |
- |
- |
|
- |
| 4.2(Description - IS 12067:2023) |
- |
- |
|
- |
| 4.3, Table 1 (i)(Moisture - IS 548 (Part 1/Sec 2) : 2021) |
- |
- |
|
- |
| 4.3, Table 1 (ii)(Saponification - IS 548 (Part 1/Sec 2) : 2021) |
- |
- |
|
- |
| 4.3, Table 1 (iii)(Acid value shall not differ from saponification value - IS 548 (Part 1/Sec 2) : 2021) |
- |
- |
|
- |
| 4.3, Table 1 (iv)(Iodine Value - IS 548 (Part 1/Sec 2) : 2021) |
- |
- |
|
- |
| 4.3, Table 1 (v)(Mineral Acidity - IS 12067:1987) |
- |
- |
|
- |
| 4.3, Table 1 (vi)(Ash - IS 12067:1987) |
- |
- |
|
- |
| 4.3, Table 1 (vii)(Unsaponifiable matter - IS 548 (Part 1/Sec 2) : 2021) |
- |
- |
|
- |
| 4.3, Table 1 (viii)(Titre - IS 548 (Part 1/Sec 2) : 2021) |
- |
- |
|
- |
| 4.3, Table 1 (ix)(Colour, 1-inch cell, Y +5R) |
- |
- |
|
- |
| 4.3, Table 1 (x)(Flash Point - IS 1448 (P-21)) |
- |
- |
|
- |
| 4.4, Table 2 (i)(C6 : 0) |
- |
- |
|
- |
| 4.4, Table 2 (ii)(C8 : 0) |
- |
- |
|
- |
| 4.4, Table 2 (iii)(C10 : 0) |
- |
- |
|
- |
| 4.4, Table 2 (iv)(C12 : 0) |
- |
- |
|
- |
| 4.4, Table 2 (v)(C14 : 0) |
- |
- |
|
- |
| 4.4, Table 2 (vi)(C16 : 0) |
- |
- |
|
- |
| 4.4, Table 2 (vii)(C16 :1) |
- |
- |
|
- |
| 4.4, Table 2 (viii)(C17 : 0) |
- |
- |
|
- |
| 4.4, Table 2 (ix)(C17 : 1) |
- |
- |
|
- |
| 4.4, Table 2 (x)(C18 : 0) |
- |
- |
|
- |
| 4.4, Table 2 (xi)(C18 : 1) |
- |
- |
|
- |
| 4.4, Table 2 (xii)(C18 : 2) |
- |
- |
|
- |
| 4.4, Table 2 (xiii)(C18 : 3) |
- |
- |
|
- |
| 4.4, Table 2 (xiv)(C20 : 0) |
- |
- |
|
- |
| 4.4, Table 2 (xv)(C20 : 1) |
- |
- |
|
- |
| 4.4, Table 2 (xvi)(C20 : 2) |
- |
- |
|
- |
| 4.4, Table 2 (xvii)(C22 : 0) |
- |
- |
|
- |
| 4.4, Table 2 (xviii)(C22 : 1) |
- |
- |
|
- |
| 4.4, Table 2 (xix)(C22 : 2) |
- |
- |
|
- |
| 4.4, Table 2 (xx)(C24 : 0) |
- |
- |
|
- |
| 4.4, Table 2 (xxi)(C24 : 1) |
- |
- |
|
- |
|
- |
-
- |
| 11200 |
BIS, Western Regional Laboratory (WRL)
| None
| IS 419 (1967) |
Specification for putty, for use on window frames (First Revision) |
- |
1690 View breakup
For Initial Testing = Rs. (1500+36+150) = Rs. 1686 = Rs. 1690 Only Keeping Properties Testing = Rs. (675+18+50) = Rs. 743 = Rs. 750 Preparation of Test Report = Rs. 300
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.1 (Form and Condition) |
- |
|
|
|
| 3.3 (Consistency) |
- |
|
|
|
| 3.4, Table 1,(i) (Residue on sieve, percent by weight Max) |
- |
|
|
|
| 3.4, Table 1,(ii) (Water content, percent by weight, Max) |
- |
|
|
|
| 3.2 (Composition) |
- |
|
|
|
|
- |
-
- |
| 11201 |
BIS, Central Laboratory (CL)
| None
| IS 13095 (2020) |
Butterfly Valves for General Purposes ( First Revision ) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.0 (VALVE END CONNECTIONS) |
- |
|
|
|
| 5.0 (SERVICE APPLICATIONS) |
- |
|
|
|
| 6.0 ( NOMINAL SIZES ) |
- |
|
|
|
| 7.0 (NOMINAL PRESSURES) |
- |
|
|
|
| 9.1.1 ( Double Flanged Body Ends) |
- |
|
|
|
| 9.2.2 (Wafer Body Ends) |
- |
|
|
|
| 10.1 -Table1 (FACE TO FACE DIMENSIONS) |
- |
|
|
|
| 11.0 (Bodies) |
- |
|
|
|
| 12.0 (DISC AND SHAFT) |
- |
|
|
|
| 13.0 (SEATING AND LININGS) |
- |
|
|
|
| 14.0 (BEARINGS) |
- |
|
|
|
| Cl. 15 Table 2 (Materials) |
- |
|
|
|
| 16.0 (OPERATION) |
- |
|
|
|
| 17.1 (Performance Testing) |
- |
|
|
|
| 17.2 (Body Test) |
- |
|
|
|
| 17.3 (Seat Test) |
- |
|
|
|
| 17.4 (Disc Strength Test) |
- |
|
|
|
|
- |
-
- |
| 11202 |
BIS, Central Laboratory (CL)
| None
| IS 12795 (2020) |
Linear Alkyl Benzene — Specification ( First Revision ) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.2 & 7.1 - Table -1, Sl no. 2 (Specific gravity at 15.5°/15.5°C,IS 1448 [Part 32] or ASTM D-4052) |
- |
|
|
|
| 4.2 & 7.1 - Table -1, Sl no. 1 (b) In 5 inch cell on Lovibond scale, expressed as Y + 5R, Max, Annex A) |
- |
|
|
|
| 4.2 & 7.1 - Table -1, Sl no. 3 (Moisture, ppm, Max,5 of IS 286 or ISO 12937 or ASTM D-6304 or UOP 481) |
- |
|
|
|
|
- |
-
Excluding Determination of molecular weight and concentration of linear alkyl benzene, Determination of paraffins, determination of sulphonability, determination of chain length distribution, determination of refrective index, determination o\f teralins, LAB content, ready biodegradibility of sulphonate, bromine index, doctor test , Colour |
| 11203 |
BIS, Central Laboratory (CL)
| None
| IS 12299 (2021) |
DAIRY WHITENER - SPECIFICATION First Revision |
All |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Table 2 /clause no 6.4 SI.No.i) (Aerobic Plate count) |
- |
|
|
|
| CL 6.4, Table 2 (ii) (Coliform Count) |
- |
|
|
|
| CL 6.4, Table 2 (iii) (Staphylococcus aureus (Coagulase positive)) |
- |
|
|
|
| CL 6.4, Table 2 (iv) (Yeast and Mold Count) |
- |
|
|
|
| CL 6.4, Table 2 (v) (Salmonella sp) |
- |
|
|
|
| CL 6.4, Table 2 (vi) (Listeria monocytogenes) |
- |
|
|
|
| CL 6.4, Table 2 (vii) (Bacillus cereus) |
- |
|
|
|
| CL 6.4, Table 2 (viii) (Sulphite reducing clostridia) |
- |
|
|
|
| CL 6.4, Table 2 (ix) (E. coli) |
- |
|
|
|
| Table 6.4/clause no(i) ( Moisture) |
- |
|
|
|
| Table 6.4/clause no(iii) (Milk protein) |
- |
|
|
|
| Table 6.4/clause no(ii) ( Milk fat) |
- |
|
|
|
| Table 6.4/clause no(iv) (Insolubility index) |
- |
|
|
|
| Table 6.4/clause no(vi) (Acid insoluble ash) |
- |
|
|
|
| Table 6.4/clause no(viii) (Titrable acidity) |
- |
|
|
|
| 6.4, Table 1, (ix) (Scorched Particle) |
- |
|
|
|
|
- |
-
500 gm x 3 |
| 11204 |
Test Master
| 8180636
| IS 17570 : Part 1 (2021) |
Air Filters for general ventilation Part 1 Technical specifications requirements and classification system based upon particulate matter efficiency ePM Adoption of ISO 16890-1:2016 |
- |
134000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| CLAUSE 7(Efficiency test) |
- |
52000 |
|
- |
| CLAUSE 5.2(Filter Material) |
- |
10000 |
|
- |
| CLAUSE 5.4(Resistance to air flow) |
- |
22000 |
|
- |
| CLAUSE 5.6(Arrestance) |
- |
50000 |
|
- |
|
09 Oct, 2027 |
-
- |
| 11205 |
PIONEER TESTING LABORATORY PRIVATE LIMITED
| 8176806
| IS 3564 (1995) |
Hydraulically Regulated Door Closers -Specification |
All Type |
9050 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 11(Marking) |
- |
200 |
|
- |
| 12(Packing) |
- |
200 |
|
- |
| 13(Accessories) |
- |
500 |
|
- |
| 6(Nominal Sizes) |
- |
500 |
|
- |
| 8(Essential Requirements) |
- |
450 |
|
- |
| 9(Finish) |
- |
500 |
|
- |
| 10Annex B(Test) |
- |
500 |
|
- |
| B-1.2(a) Visual Inspection) |
- |
500 |
|
- |
| B-1.3(b) Surface) |
- |
500 |
|
- |
| B-1.4(c) Performance Requirements) |
- |
500 |
|
- |
| B-1.5(d) Endurance Test) |
- |
2000 |
|
- |
| Clause 7 (Table 2 - xvii)(Material for Top lid) |
- |
400 |
|
- |
| Clause 7 (Table 2 - xvi)(Material for Pawl) |
- |
400 |
|
- |
| Clause 7 (Table 2 - xv)(Material for Top nut) |
- |
400 |
|
- |
| Clause 7 (Table 2 - xiv)(Material for Main arm bolt) |
- |
400 |
|
- |
| Clause 7 (Table 2 - xiii)(Material for Internal bearing and gland ) |
- |
400 |
|
- |
| Clause 7 (Table 2 - xii)(Material for Material for Eccentric shaft ) |
- |
400 |
|
- |
| Clause 7 (Table 2 - xi)(Material for Concentric ratchet ( For bottle type ) ) |
- |
400 |
|
- |
| Clause 7 (Table 2 - x)(Material for Clamp) |
- |
400 |
|
- |
| Clause 7 (Table 2 - ix)(Material for Main arm ) |
- |
400 |
|
- |
| Clause 7 (Table 2 - viii)(Material for Adjusting arm) |
- |
400 |
|
- |
| Clause 7 (Table 2 - vii)(Material for All weather resistant homogeneous high viscosity hydraulic) |
- |
400 |
|
- |
| Clause 7 (Table 2 - vi)(Material for Control valve screw) |
- |
400 |
|
- |
| Clause 7 (Table 2 - v)(Material for Material for Packing/washers) |
- |
400 |
|
- |
| Clause 7 (Table 2 - iv)(Material for Piston or Rack-piston/pinion) |
- |
400 |
|
- |
| Clause 7 (Table 2 - iii)(Material for Nuts) |
- |
400 |
|
- |
| Clause 7 (Table 2 - ii)(Material for Torsion spring helical spring) |
- |
400 |
|
- |
|
10 Mar, 2027 |
-
- |
| 11206 |
PIONEER TESTING LABORATORY PRIVATE LIMITED
| 8176806
| IS 3444 (1999) |
Corrosion resistant high alloy steel and nickel base castings for general applications - Specification (Third Revision) |
All Type |
9950 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 14.4(Microstructure) |
- |
750 |
|
- |
| 10(FREEDOM FROM DEFECTS) |
- |
750 |
|
- |
| 9(WORKMANSHIP AND FINISH) |
- |
750 |
|
- |
| 8, Table 1.(CHEMICAL COMPOSITION) |
- |
4200 |
|
- |
| Cl.10.1(All castings shall be free from defects) |
- |
500 |
|
- |
| Cl.13.2(Tensiie Test) |
- |
1500 |
|
- |
| Cl.13.2(Elongation) |
- |
1000 |
|
- |
| Cl. 13.3(Hardness Test) |
- |
1500 |
|
- |
| 17(Marking) |
- |
200 |
|
- |
| 11(Fetling and Dressing) |
- |
1500 |
|
- |
| 12(Heat Treatment) |
- |
1500 |
|
- |
| Cl.14(NON-DESTRUCTIVE TESTS) |
- |
500 |
|
- |
| 8.4(Residual elements) |
- |
1500 |
|
- |
| 13(MECHANICAL TESTS) |
- |
0 |
|
- |
| 15(Repair of casting) |
- |
0 |
|
- |
| 11(Fettling and dressing) |
- |
0 |
|
- |
| 8.3(Product Analysis) |
- |
0 |
|
For BIS samples: 1.5 times of BIS testing charges (10% discount to BIS) |
|
10 Mar, 2027 |
-
Exclusion: Cl.14 (Non-destructive tests) |
| 11207 |
PIONEER TESTING LABORATORY PRIVATE LIMITED
| 8176806
| IS 6911 (2017) |
Stainless steel plate, sheet and strip - Specification (Second Revision) |
All Type |
11000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl. 7.1 & 7.2 Table 1(Carbon -IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
300 |
|
- |
| Cl. 7.1 & 7.2 Table 1(Silicon -IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
300 |
|
- |
| Cl. 7.1 & 7.2 Table 1(Manganese -IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
300 |
|
- |
| Cl. 7.1 & 7.2 Table 1(Nickel -IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
300 |
|
- |
| Cl. 7.1 & 7.2 Table 1(Chromium -IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
300 |
|
- |
| Cl. 7.1 & 7.2 Table 1(Molybdenum -IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
300 |
|
- |
| Cl. 7.1 & 7.2 Table 1(Sulphur -IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
300 |
|
- |
| Cl. 7.1 & 7.2 Table 1(Phosphorus -IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
300 |
|
- |
| Cl. 7.1 & 7.2 Table 1(Nitrogen -IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
300 |
|
- |
| Cl. 7.1 & 7.2 Table 1(Copper -IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
300 |
|
- |
| Cl. 7.1 & 7.2 Table 1(Others-IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
300 |
|
- |
| Cl. 7.1 & 7.2 Table 1(Titanium-IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
300 |
|
- |
| Cl. 7.1 & 7.2 Table 1(Niobium-IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
300 |
|
- |
| Cl.12(Corrosion Resistance- IS 10461(Part1)) |
- |
5000 |
|
- |
| 6(Freedom from defects , IS 6911) |
- |
400 |
|
- |
| 10.1,Table 4&Table 6(Tensile Test - IS 1608(Pt -1)) |
- |
1500 |
|
- |
| 10.2,Table 4&Table 5(Hardness Test- IS 1500(Pt -1),IS 1501 (Pt-1),IS 1586 (Pt -1)) |
- |
2500 |
|
- |
| 10.3(Bend Test - IS 1599) |
- |
1000 |
|
- |
| 11,Table 7(Erichsen cupping test-IS 10175) |
- |
1500 |
|
- |
| 15(Surface Finish) |
- |
400 |
|
- |
| 17(Dimension and tolerance) |
- |
300 |
|
- |
| 10.1 Amd 2(Yeild Strength) |
- |
1000 |
|
- |
| 10.1 Amd 2(0.2 Percent Proof Stress) |
- |
1000 |
|
- |
| 10.1 Amd 2(Elongation) |
- |
1000 |
|
- |
| Clause 17 , Table 9 to Table 19(Dimension (Length)) |
- |
300 |
|
- |
| Clause 17 , Table 9 to Table 19(Dimension (Width)) |
- |
300 |
|
- |
| Clause 17 , Table 9 to Table 19(Dimension (Thickness)) |
- |
300 |
|
- |
| Clause 17 , Table 9 to Table 19(Flatness) |
- |
1000 |
|
- |
| Clause 17 , Table 9 to Table 19(Camber) |
- |
1000 |
|
- |
| 8(Heat Treatment) |
- |
1500 |
|
- |
| 19(Marking) |
- |
200 |
|
- |
| Table 1(Alumium) |
- |
500 |
|
- |
| Table 1, Amendment 2(Zirconium) |
- |
500 |
|
- |
| Table 1, Amendment 2(Tungstun) |
- |
500 |
|
- |
| Table 1, Amendment 2(Ce) |
- |
500 |
|
- |
| Table 1, Amendment 2(Cobalt) |
- |
500 |
|
- |
| Table 1, Amendment 2(Ta) |
- |
500 |
|
- |
| 12(Corrosion resistance) |
- |
5000 |
|
- |
|
10 Mar, 2027 |
-
- |
| 11208 |
PIONEER TESTING LABORATORY PRIVATE LIMITED
| 8176806
| IS 2831 (2012) |
Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into structural steel (Ordinary Quality) - Specification (Fourth Revision) |
All Type |
6500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl. 6.1, Table 1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
300 |
|
- |
| Cl. 6.1, Table 1(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
300 |
|
- |
| Cl. 6.1, Table 1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
300 |
|
- |
| Cl. 6.1, Table 1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
300 |
|
- |
| Cl. 6.1, Table 1(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
300 |
|
- |
| Cl. 6.1, Table 1(Aluminium- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
300 |
|
- |
| Cl. 6.1, Table 1(Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
300 |
|
- |
| Cl. 6.1, Table 1(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
300 |
|
- |
| Cl. 6.1, Table 1(Niobium- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
300 |
|
- |
| Cl. 6.1, Table 1(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
300 |
|
- |
| Cl. 6.1, Table 1(Titanium- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
300 |
|
- |
| 9( FREEDOM FROM DEFECTS) |
- |
300 |
|
- |
| 10.1.a)( Macro examination IS 11371) |
- |
15000 |
|
- |
| 10.1.b)( Sulphur print tests IS 12037) |
- |
15000 |
|
- |
| 11 & 12(DIMENSIONS and Tolerances) |
- |
500 |
|
- |
| 10.2(Bend) |
- |
1000 |
|
- |
| 10.3(Chamber) |
- |
1500 |
|
- |
| Cl. 11, 12 Table 3(Thickness ) |
- |
300 |
|
- |
| Cl. 11, 12 Table 3(Width Across Flat) |
- |
700 |
|
- |
| Clause 6.1.1(Carbon Equivalent (CE)) |
- |
300 |
|
- |
| Table 1 Note 2(Nb+V+Ti) |
- |
300 |
|
- |
| 13(Marking) |
- |
200 |
|
- |
| Table 1 Note 2(Nb+V+Ti) |
- |
300 |
|
- |
| Clause 6.1.1(Carbon Equivalent (CE)) |
- |
300 |
|
- |
| 8(Selection of Test sample) |
- |
0 |
|
- |
| Table 1 Note 2(Any Instrumental Method/Chemical Method) |
- |
300 |
|
- |
| Table 1 Note 2(Any Instrumental Method/Chemical Method) |
- |
300 |
|
- |
| Clause 6.1.1(By calculation) |
- |
300 |
|
- |
| Clause 9.3(Bend) |
- |
1000 |
|
- |
| Table 1 Note 2(Any Instrumental Method/Chemical Method) |
- |
300 |
|
- |
| Clause 6.1.1(By calculation) |
- |
300 |
|
- |
| Clause 9.4(Camber) |
- |
1500 |
|
- |
| Clause 6.1.1(IS 2831 : 2012) |
- |
0 |
|
- |
| 10.3(Chamber) |
- |
1500 |
|
- |
| 11(Dimensions) |
- |
500 |
|
- |
| 10.2(Bend) |
- |
1000 |
|
- |
| 11(Dimensions) |
- |
500 |
|
For BIS samples: 1.5 times of BIS testing charges (10% discount to BIS) |
|
10 Mar, 2027 |
-
- |
| 11209 |
PIONEER TESTING LABORATORY PRIVATE LIMITED
| 8176806
| IS 2830 (2012) |
Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into steel for general structural purposes - Specification (Third Revision) |
All Type |
7800 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 9(Workmanship) |
- |
400 |
|
- |
| Cl 10.1(Workmanship) |
- |
400 |
|
- |
| Cl 10.2(Workmanship) |
- |
1000 |
|
- |
| Cl 10.2(Press) |
- |
1000 |
|
- |
| Cl 10.3(Workmanship) |
- |
1500 |
|
- |
| Cl 11(Length, Width & Thickness) |
- |
900 |
|
- |
| 6.1(Carbon %) |
- |
300 |
|
- |
| 6.1(Manganese %) |
- |
300 |
|
- |
| 6.1(Phosphorus %) |
- |
300 |
|
- |
| 6.1(Sulphur %) |
- |
300 |
|
- |
| 6.1(Silicon %) |
- |
300 |
|
- |
| 6.1( Copper %) |
- |
300 |
|
- |
| 6.1( Aluminium %) |
- |
300 |
|
- |
| 6.1( Nb) |
- |
300 |
|
- |
| 6.1(V) |
- |
300 |
|
- |
| 6.1( Ti) |
- |
300 |
|
- |
| 6.1(Cr) |
- |
3003 |
|
- |
| 6.1(Mo) |
- |
300 |
|
- |
| 6.1(Ni) |
- |
300 |
|
- |
| 6.1( Nitrogen%) |
- |
300 |
|
- |
| 10.1 (a)(Macro-examination) |
- |
15000 |
|
- |
| 10 (b)(Sulphur Print Test - IS:12037) |
- |
15000 |
|
- |
| 6(carbon equivalent (CE)) |
- |
300 |
|
- |
| 13(Marking) |
- |
500 |
|
- |
| 12(Tolrences) |
- |
0 |
|
- |
| 11(Dimensions) |
- |
600 |
|
- |
| 10.3(Chamber) |
- |
2000 |
|
- |
| 10.2(Bend) |
- |
1000 |
|
- |
| 10.1(Test) |
- |
0 |
|
- |
| 6.3(Check Analysis) |
- |
0 |
|
- |
| 6.2(Copper bearing quality) |
- |
300 |
|
- |
| 6.1(Chemical method) |
- |
0 |
|
- |
| 5(Manufacture) |
- |
0 |
|
- |
| 4(Supply of material) |
- |
0 |
|
- |
| Clause 9(Freedom from Defect) |
- |
500 |
|
- |
| Clause 6, Table 1 Note : 9(S+P) |
- |
300 |
|
- |
| Clause 6, Table 1 Note : 3(Nb+V+Ti) |
- |
300 |
|
- |
| Clause 6, Table 1 Note : 1(Carbon Equivalent) |
- |
300 |
|
- |
| 13(Marking) |
- |
500 |
|
- |
| 12(Tolerance - IS 2830) |
- |
0 |
|
- |
| 8(Selection of Test samples) |
- |
0 |
|
- |
| 10 (a)(Macro Examination-IS:11371) |
- |
2000 |
|
- |
| 6(Copper as Cu) |
- |
300 |
|
- |
| 6(Sulphur + Phosphorus) |
- |
300 |
|
- |
| 6(Micro alloying elements) |
- |
900 |
|
- |
| 6(Sulphur as S- IS:228) |
- |
300 |
|
- |
| 6(Manganese as Mn-IS:228) |
- |
300 |
|
- |
| 6(Carbon as C - IS:228) |
- |
300 |
|
- |
| Clause 6, Table 1 Note : 3(By Calculation) |
- |
300 |
|
- |
| Clause 6, Table 1 Note : 1(By Calculation) |
- |
300 |
|
- |
| Cl 11(Length, Width & Thickness) |
- |
600 |
|
- |
| Cl 10.3(Workmanship) |
- |
1500 |
|
- |
| Cl 10.2(Press) |
- |
1000 |
|
- |
| Cl 10.2(Workmanship) |
- |
1500 |
|
- |
| Cl 10.1(Workmanship) |
- |
1000 |
|
- |
| Cl 9(Workmanship) |
- |
400 |
|
- |
| Cl 9(Workmanship) |
- |
400 |
|
- |
| Cl 10.1(Workmanship) |
- |
1000 |
|
- |
| Cl 10.2(Workmanship) |
- |
1500 |
|
- |
| Cl 10.2(Press) |
- |
1000 |
|
- |
| Cl 10.3(Workmanship) |
- |
1500 |
|
- |
| Cl 11(Length, Width & Thickness) |
- |
600 |
|
- |
| Clause 10.2(Bend) |
- |
1000 |
|
- |
| Clause 10.3(Camber) |
- |
1000 |
|
- |
| Cl. 10.1 (a)(Macro Examination) |
- |
2000 |
|
- |
| Cl. 10.2(Bend) |
- |
1000 |
|
- |
| Cl. 10.3(Camber) |
- |
1000 |
|
- |
| Cl. 11.2(Out of Squareness) |
- |
200 |
|
- |
| Cl. 10.1 (b)(Sulphur Print) |
- |
7500 |
|
- |
| Clause 6.1(IS 2830 : 2012) |
- |
300 |
|
- |
| 10.1 (b)(Sulphur print) |
- |
7500 |
|
- |
| 11(Width) |
- |
200 |
|
- |
| 11(Thickness) |
- |
300 |
|
- |
| 6.1(Nitrogen%) |
- |
300 |
|
- |
| 6.1(Ni) |
- |
300 |
|
- |
| 6.1(Mo) |
- |
300 |
|
- |
| 6.1(Cr) |
- |
300 |
|
- |
| 6.1( Ti) |
- |
300 |
|
- |
| 6.1(V) |
- |
300 |
|
- |
| 6.1( Nb) |
- |
300 |
|
- |
| 6.1( Aluminium %) |
- |
300 |
|
- |
| 6.1( Copper %) |
- |
300 |
|
- |
| 6.1(Silicon %) |
- |
300 |
|
- |
| 6.1(Sulphur %) |
- |
300 |
|
- |
| 6.1(Phosphorus %) |
- |
300 |
|
- |
| 6.1(Manganese %) |
- |
300 |
|
- |
| 6.1(Carbon %) |
- |
300 |
|
- |
| 6.1( Nitrogen%) |
- |
300 |
|
- |
| 6.1(Ni) |
- |
300 |
|
- |
| 6.1(Cr) |
- |
300 |
|
- |
| 6.1( Ti) |
- |
300 |
|
- |
| 6.1(V) |
- |
300 |
|
- |
| 6.1( Nb) |
- |
300 |
|
- |
| 6.1( Aluminium %) |
- |
300 |
|
- |
| 6.1( Copper %) |
- |
300 |
|
- |
| 6.1(Silicon %) |
- |
300 |
|
- |
| 6.1(Sulphur %) |
- |
300 |
|
- |
| 6.1(Phosphorus %) |
- |
300 |
|
- |
| 6.1(Manganese %) |
- |
300 |
|
- |
| 6.1(Carbon %) |
- |
300 |
|
- |
| 6.1(Mo) |
- |
300 |
|
- |
| Cl 11(Length) |
- |
200 |
|
- |
| Cl 10.3(Workmanship) |
- |
1500 |
|
- |
| Cl 10.2(Press) |
- |
1000 |
|
- |
| Cl 10.2(Workmanship) |
- |
1000 |
|
- |
| Cl 10.1(Workmanship) |
- |
1000 |
|
- |
| Cl 9(Workmanship) |
- |
500 |
|
- |
| Cl 11(Length, Width & Thickness) |
- |
600 |
|
- |
| Cl 10.3(Workmanship) |
- |
1500 |
|
- |
| Cl 10.2(Press) |
- |
1000 |
|
- |
| Cl 10.1.b)(Workmanship) |
- |
1000 |
|
- |
| Cl 10.1.a)(Workmanship) |
- |
1000 |
|
- |
| Cl 9(Workmanship) |
- |
500 |
|
For BIS samples: 1.5 times of BIS testing charges (10% discount to BIS) |
|
10 Mar, 2027 |
-
- |
| 11210 |
BIS, Central Laboratory (CL)
| None
| IS 1989 : Part 2 (1986) |
Specification for leather safety boots and shoes: Part 2 for heavy metal industries (Fourth Revision) |
- |
Rs 5100/- for safety boots, Rs.4500/- safety shoes View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7 (Design) |
- |
|
|
|
| 8 (a) Upper Leather) |
- |
|
|
|
| 10 (Finish) |
- |
|
|
|
| 17 (a) Shoes with Leather Sole and Heel) |
- |
|
|
|
| 15 (Manufacture) |
- |
|
|
|
| 14 (k) Screw Wire) |
- |
|
|
|
| 14 (j) Rivets) |
- |
|
|
|
| 14 (h) Toe Compound) |
- |
|
|
|
| 9 (Manufacture) |
- |
|
|
|
|
- |
-
Exclusion Chromium
Mechanical complete :Except i) Threads Cl 8.9 Cl 14.9
Material requirement 4 pair for complete testing along with raw material with spacified requirment as per ISs |
| 11211 |
BIS, Central Laboratory (CL)
| None
| IS 1989 : Part 1 (1986) |
Specification for leather safety boots and shoes: Part 1 for miners (Fourth Revision) |
- |
Rs 5100/- for safety boots, Rs.4500/- safety shoes View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7.1 (Design) |
- |
|
|
|
| 10.1 (Finish) |
- |
|
|
|
| 10.3 (Finish) |
- |
|
|
|
| 10.4 (Finish) |
- |
|
|
|
| 11.1 (Mass
Boots with Leather Sole and Heel) |
- |
|
|
|
| 11.2 (Mass
Boots with Rubber Sole and Heel) |
- |
|
|
|
| 13 (Design) |
- |
|
|
|
| 16.2 (Finish) |
- |
|
|
|
| 16.3 (Finish) |
- |
|
|
|
| 16.4 (Finish) |
- |
|
|
|
| 17.1 (Mass
Shoes with Leather Sole and Heel) |
- |
|
|
|
| 17.2 (Mass
Shoes with Rubber Sole and Heel) |
- |
|
|
|
|
- |
-
Exclusion Chromium
Mechanical (complete) except i) Threads Cl 8.9 Cl 14.9
Materail requirement :4 pair for complete testing along with raw material with spacified requirment as per Iss |
| 11212 |
BIS, Central Laboratory (CL)
| None
| IS 11544 (1986) |
Specification for slipper, rubber |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.1 (Shape & Design) |
- |
|
|
|
| 3.2.2 (Bottom Filling Material) |
- |
|
|
|
| 3.2.8 (Workmanship and Finish -) |
- |
|
|
|
| 3.2.5 (Type of Thread) |
- |
|
|
|
| 3.2.6 (Thickness of components) |
- |
|
|
|
| 3.2.4.1 (Weave of fabrics) |
- |
|
|
|
|
- |
-
Complete for chemical (relative Density) |
| 11213 |
BIS, Central Laboratory (CL)
| None
| IS 5676 (1995) |
Moulded solid rubber soles and heels - SpecificatlOn (Second Revision) |
- |
Rs.5100/- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5/5.1 (REQUIREMENTS-General) |
- |
|
|
|
| 5/5.2- Fig. 1 to 5 (REQUIREMENTS-Design) |
- |
|
|
|
| 5/5.3/5.3.1 (REQUIREMENTS- Construction) |
- |
|
|
|
| 5/5.7- Table2 (REQUIREMENTS- Physical Requirements-
as per IS 3400 (Part 1, Part 2, Part 4, Part 9, Part 10, Part 16)) |
- |
|
|
|
| 5/5.5- Table1 (REQUIREMENTS-Thickness) |
- |
|
|
|
| 5.7 Table 2 i) (Amendment 1) (Relative Density) |
- |
|
|
|
| 5.7, Table 2 ii) (Amendment 1) (Hardness, degree, Shore A) |
- |
|
|
|
| 5.7, Table 2 iv) (Amendment 1) (Abrasion Resistance at applied force of 10 N) |
- |
|
|
|
| 5.7, Table 2 v) (Amendment 1) (Tensile strength) |
- |
|
|
|
| 5.7, Table 2 vi) (Amendment 1) (Elongation at break) |
- |
|
|
|
| 5.7, Table 2 vii) (Amendment 1) (Tear strength (average force)) |
- |
|
|
|
| 5.7, Table 2 iii) (Amendment 1) (Flexing resistance) |
- |
|
|
|
|
- |
-
Complete for chemical (relative Density)
Mechanical (Complete) except ; i)Tear strength (Table 1).
Raw material requirement : 3 pair of complete footwear along with raw material with specified requirement as per ISs and For abrasion resistance to outsole raw material of 10 mm min. thickness required |
| 11214 |
BIS, Central Laboratory (CL)
| None
| IS 6664 (1992) |
Rubber microcellular sheets for soles and heels - Specification (First Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl.4 Cl.4.1.3 And 8.3,Table1, i) (Relative density) |
- |
|
|
|
| Cl.4.1.3 And 8.3,Table1, iii) (Hardness, Shore A durometer min) |
- |
|
|
|
| Cl.4 Cl.4.1.3 And 8.3,Table1, iii) (Change in Hardness after ageing at 100±1°C for 24hr) |
- |
|
|
|
| Cl.4 Cl.4.1.3 And 8.3,Table1, iv) (Compression set at constant stress percent, Max) |
- |
|
|
|
| Cl.4 Cl.4.1.3 And 8.3,Table1, v) (Split tear strength, kg,Min) |
- |
|
|
|
| Cl.4 Cl.4.1.3 And 8.3,Table1, viii) (Water absorption , percent by mass, Max) |
- |
|
|
|
| Cl.4 Cl.4.1.3 And 8.3,Table 1, viii) (Flexing resistance: Maximum cut growth at 50 000 cycles) |
- |
|
|
|
| Cl.4 Cl.4.1.3 And 8.3,Table 1, vi) (Heat shrinkage test at 100±1°C for 1 hour max) |
- |
|
|
|
|
- |
-
Complete for chemical
Mechanical (complete ) excluding Compression set at constant stress Table 1
Raw material with specified requirement as per ISs and For abrasion resistance to outsole raw material of 10 mm min. thickness required |
| 11215 |
BIS, Central Laboratory (CL)
| None
| IS 6719 (1972) |
Solid Pvc Soles And Heels |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl. 3.1,3.2,3.3,3.4,3.5 (Material) |
- |
|
|
|
| 3.6 (i) (Relative density ) |
- |
|
|
|
| 3.6 (ii) (Tensile Strength ) |
- |
|
|
|
| 3.6 (iii) (Elongation at break, percent ) |
- |
|
|
|
| 3.6 (iv) (Tear Strength a) Force Part b) Back Part ) |
- |
|
|
|
| 3.6 (v) (Volatility, percent by means ) |
- |
|
|
|
| 3.6.1 (Hardness ) |
- |
|
|
|
| 3.6 (i) (Relative density ) |
- |
|
|
|
| Cl. 6.4 (Measurement of thickness) |
- |
|
|
|
| Table 1 (Flexing resistance) (Table 1 (Flexing resistance, Bennewart method, cut growth at the end of 30 000 cycles, mm, Max)) |
- |
|
|
|
| Table 1 (Abrasion resistance) (Abrasion resistance at applied
force of 10 N (volume loss),
mm3, Max) |
- |
|
|
|
|
- |
-
Complete for chemical
Mechanical (Completed) except ; i)Tear strength (Table 1)
Raw material requirement :3 pair of complete footwear along with raw material with specified requirement as per ISs and For abrasion resistance to outsole raw material of 10 mm min. thickness required |
| 11216 |
BIS, Central Laboratory (CL)
| None
| IS 13995 (1995) |
Unlined moulded rubber boots - Specification |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1 (Thickness ) |
- |
|
|
|
| 5.1.1 (Tensile Strength (before ageing)) |
- |
|
|
|
| 5.1.2 (Tensile Strength (after ageing)) |
- |
|
|
|
| 5.1.3 (Tear Strength) |
- |
|
|
|
| 5.1.5 (Flexing resistance of upper) |
- |
|
|
|
| 5.1.6 (Design) |
- |
|
|
|
| 5.1.7 (Size) |
- |
|
|
|
|
- |
-
No Chemical testing
Mechanical (Complete) Except :i) Tear Resistance of Upper (Cl 5.1.3)
Material requirement :4 pair for complete testing along with raw material with spacified requirment as per ISs |
| 11217 |
BIS, Central Laboratory (CL)
| None
| IS 16645 (2018) |
Moulded Plastics Footwear ” Lined or Unlined Polyurethane Boots for General Industrial use ” Specification |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1 (Soling Pattern ) |
- |
|
|
|
| 5.1 (General ) |
- |
|
|
|
| 5.2 (Resistance to flexing of boot upper) |
- |
|
|
|
| 5.4 (Hardness (IRHD)) |
- |
|
|
|
| 5.5 (Cold flex temp of upper) |
- |
|
|
|
| 5.6 (Resistance to soling to cut growth) |
- |
|
|
|
| 5.7 (Split tear strength ) |
- |
|
|
|
|
- |
-
No Chemical testing
Mechanical ( Complete) Except i) Cold flex temperature of the upper (Cl 5.5)
Material requirement: 4 pair for complete testing along with raw material with spacified requirment as per ISs |
| 11218 |
BIS, Central Laboratory (CL)
| None
| IS 17012 (2018) |
High ankle tactical boots with pu - Rubber sole - Specification |
- |
20000 View breakup
For Chemical Requirement, Cl.5
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.2 (Design ) |
- |
|
|
|
| 4.3.1 (Size) |
- |
|
|
|
| 4.4 (Height of upper ) |
- |
|
|
|
| 4.5.1 (Construction) |
- |
|
|
|
| 4.5.2 (Ergonomic Feature) |
- |
|
|
|
| 4.5.4 (Slip Resitance) |
- |
|
|
|
| 4.5.5 (Antistatic test) |
- |
|
|
|
| 4.5.6 (Heat Insulation of sole Complex) |
- |
|
|
|
| 4.5.7 (Cold Insulation of sole complex) |
- |
|
|
|
| 4.6.1 (Thickness ) |
- |
|
|
|
| 4.6.2 (Tear Strength) |
- |
|
|
|
| 4.7.1 (Material vamp & Quarter) |
- |
|
|
|
| 4.7.4 (Abrasion resistance ) |
- |
|
|
|
| 4.7.5 (Water Vapour permeability & coefficient ) |
- |
|
|
|
| 4.9.3 (Water absorption & desorption percent) |
- |
|
|
|
| 4.14.6 (Hardness (IRHD)) |
- |
|
|
|
| 4.16.2 (Breaking Strength of lace ) |
- |
|
|
|
| 5.0 (Innocuousness Test IS 17011) |
- |
|
|
|
|
- |
-
Complete for Chemical ( The material composition of each shoe part must be clearly declared for testing)
Mechanical (Complete) except Energy absorption of seat region (CL 4.5.8)
Raw material Requirement :4 pair of complete footwear and their raw materials with the required specifications as per ISs and For abrassion resistance to outsole raw material of 10 mm min. thickness required |
| 11219 |
BIS, Central Laboratory (CL)
| None
| IS 17037 (2018) |
Anti riot shoes - Specification |
- |
20000 View breakup
Chemical Requirement, Cl. 5
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.5.6.1 (General) |
- |
|
|
|
| 4.3.1 (Size) |
- |
|
|
|
| 4.4 (Height of upper ) |
- |
|
|
|
| 4.5.4 (Slip Resitance) |
- |
|
|
|
| 4.5.5.1 (Dimension) |
- |
|
|
|
| 4.3.2 (Weight) |
- |
|
|
|
| 4.5.4 (Slip Resitance) |
- |
|
|
|
| 4.5.5.2 (Flex resistance ) |
- |
|
|
|
| 4.5.5.1 (Dimension) |
- |
|
|
|
| 4.5.6.1 (General) |
- |
|
|
|
| 4.5.6.2 (Internal Toe cap length) |
- |
|
|
|
| 4.5.6.3 (Impact resistance ) |
- |
|
|
|
| 4.5.6.4 (Compression resistance) |
- |
|
|
|
| 4.5.7.1 (Antistatic test) |
- |
|
|
|
| 4.5.8 (Heat insulation of sole complex) |
- |
|
|
|
| 4.6.2 (Tear Strength) |
- |
|
|
|
| 4.6.3 (Water vapour permeability & coefficent ) |
- |
|
|
|
| 4.7.4 (Abrasion resistance ) |
- |
|
|
|
| 4.14.4 (Hardness (IRHD)) |
- |
|
|
|
| Cl-5 (IS - 17011,Table - 1(i) (Allergenic and carcinogenic disperse dyes) |
- |
|
|
|
| Cl-5 (IS - 17011,Table - 1(ii) (Aromatic amines released from Azo dyes (each individual amine)) |
- |
|
|
|
| Cl-5 (IS - 17011,Table - 1(iii) (Aromatic amines released from Azo dyes (each individual amine)) |
- |
|
|
|
| Cl-5 (IS - 17011,Table - 1(iv) (Chromium (VI)) |
- |
|
|
|
| Cl-5 (IS - 17011,Table - 1(v) (Dimethyl fumarate (DMFU)) |
- |
|
|
|
| Cl-5 (IS - 17011,Table - 1(vi) (Formaldehyde (free or released by partial hydrolysis)) |
- |
|
|
|
| Cl-5 (IS - 17011,Table - 1(viii) (Organotin compounds) |
- |
|
|
|
| Cl-5 (IS - 17011,Table - 1(ix) (PCP-TeCP-TriCP polychlorophenols) |
- |
|
|
|
| Cl-5 (IS - 17011,Table - 1(x) (pH) |
- |
|
|
|
| Cl-5 (IS - 17011,Table - 1(xi) (Phthalates (each individual phthalate)) |
- |
|
|
|
| Cl-5 (IS - 17011,Table - 1(xii) (Nickel, on skin contact) |
- |
|
|
|
|
- |
-
Complete for Chemical ( The material composition of each shoe part must be clearly declared for testing)
Mechanical (Complete) except; Energy absorption of seat region As per Cl 4.5.10
Raw Material Requirement: 4 pair of complete footwear and their raw materials with the required specifications as per ISs and For abrasion resistance to outsole raw material of 10 mm min. thickness required |
| 11220 |
BIS, Western Regional Laboratory (WRL)
| None
| IS 15833 (2009) |
Stainless Steel Tower Bolts -specification |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 5 (MANUFACTURE) |
- |
|
|
|
| Cl 6 (DIMENSIONS) |
- |
|
|
|
| Cl 6 (DIMENSIONS) |
- |
|
|
|
| Cl 6 (DIMENSIONS) |
- |
|
|
|
| Cl 6 (DIMENSIONS) |
- |
|
|
|
| Cl 6 (DIMENSIONS) |
- |
|
|
|
| Cl 6 (DIMENSIONS) |
- |
|
|
|
| Cl 6 (DIMENSIONS) |
- |
|
|
|
| Cl 6 (DIMENSIONS) |
- |
|
|
|
| Cl 6 (DIMENSIONS) |
- |
|
|
|
| Cl 7 (0) |
- |
|
|
|
| 8 (Marking) |
- |
|
|
|
|
- |
-
- |
