| 11161 |
DELHI TEST HOUSE, Azadhpur
| 8131406
| IS 17781 (2021) |
VITAMIN MINERAL PREMIX FOR MANUFACTURING FORTIFIED RICE KERNELS- SPECIFICATION |
- |
18000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1(Description) |
- |
500 |
|
- |
| 4.2(Vitamin and mineral premix shall be white to off
white in colour with faint odour. It shall be easy to use
and free from any objectionable or undesirable colour,
odour and foreign matter.) |
- |
500 |
|
- |
| 4.7 and 8 Table 1(i) Micronized ferric pyrophosphate) |
- |
500 |
|
- |
| 4.7 and 8 table 1(ii) Folic acid) |
- |
1000 |
|
- |
| 4.7 and 8 table 1(iii) Cyanocobalamine or hydroxycobalamine) |
- |
2000 |
|
- |
| 4.7 and 8 table 1(i) Zinc oxide (ZnO)) |
- |
2000 |
|
- |
| 4.7 and 8 table 1(ii) Retinyl palmitate) |
- |
2000 |
|
- |
| 4.7 and 8 table 1(iv) Thiamine hydrochloride or Thiamine mononitrate) |
- |
2000 |
|
- |
| 4.7 and 8 table 1(v) Riboflavin or riboflavin 5’-phosphate sodium) |
- |
2000 |
|
- |
| 4.7 and 8 table 1(vi) Nicotinamide or nicotinic acid) |
- |
2000 |
|
- |
| 4.7 and 8 table 1(vii) Pyridoxine hydrochloride) |
- |
2000 |
|
- |
| 4.9, 6.2 and 8(i) Moisture content, percent by mass, Max) |
- |
1000 |
|
- |
| 4.9, 6.2 and 8(ii) Particle size of micronized ferric pyrophosphate (D90 particles), µm) |
- |
1000 |
|
- |
|
17 Jun, 2027 |
-
Included w.e.f. 11.09.2023 |
| 11162 |
PIONEER TESTING LABORATORY PRIVATE LIMITED
| 8176806
| IS 2547 : Part 1 (1976) |
Specification for gypsum building plaster: Part 1 excluding premixed lightweight plasters |
All Type |
7900 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Clause 4.1, Table-1(Beta hemihydrate, SO3) |
- |
500 |
|
- |
| Clause 4.1, Table-1(Beta hemihydrate, CaO) |
- |
500 |
|
- |
| Clause 4.1, Table-1(Beta hemihydrate, Soluble magnesium salts as MgO) |
- |
500500 |
|
- |
| Clause 4.1, Table-1(Beta hemihydrate, Soluble sodium salts as Na2O) |
- |
500 |
|
- |
| Clause 4.1, Table-1(Beta hemihydrate,. Loss of ignition) |
- |
400 |
|
- |
| Clause 4.1, Table-1(Retarded Hemihydrate Gypsum Plaster, SO3) |
- |
500 |
|
- |
| Clause 4.1, Table-1(Retarded Hemihydrate Gypsum Plaster, CaO) |
- |
500 |
|
- |
| Clause 4.1, Table-1(Retarded Hemihydrate Gypsum Plaster, Soluble magnesium salts as MgO) |
- |
500 |
|
- |
| Clause 4.1, Table-1(Retarded Hemihydrate Gypsum Plaster, Soluble sodium salts as Na2O) |
- |
500 |
|
- |
| Clause 4.1, Table-1(Retarded Hemihydrate Gypsum Plaster, Loss of ignition) |
- |
400 |
|
- |
| Clause 4.1, Table-1(Retarded Hemihydrate Gypsum Plaster, Free lime) |
- |
750 |
|
- |
| Clause 4.1, Table-1(Anhydrous Gypsum plaster,. SO3) |
- |
500 |
|
- |
| Clause 4.1, Table-1(Anhydrous Gypsum plaster,. CaO) |
- |
500 |
|
- |
| Clause 4.1, Table-1(Anhydrous Gypsum plaster,. Soluble magnesium salts as MgO) |
- |
500 |
|
- |
| Clause 4.1, Table-1(Anhydrous Gypsum plaster,. Soluble sodium salts as Na2O) |
- |
500 |
|
- |
| Clause 4.1, Table-1(Anhydrous Gypsum plaster,. Loss on ignition) |
- |
400 |
|
- |
| Clause 4.1, Table-1(Keene's Plaster, SO3) |
- |
500 |
|
- |
| Clause 4.1, Table-1(Keene's Plaster, CaO) |
- |
500 |
|
- |
| Clause 4.1, Table-1(Keene's Plaster, Soluble magnesium salts as MgO) |
- |
500 |
|
- |
| Clause 4.1, Table-1(Keene's Plaster, Soluble sodium salts as Na2O) |
- |
500 |
|
- |
| Clause 4.1, Table-1(Keene's Plaster, Loss of ignition) |
- |
400 |
|
- |
| Cl 5.2, Table 2(Plaster Sand Mixture & Neat Plaster) |
- |
1000 |
|
- |
| Cl 5.2, Table 3(Transverse Strength) |
- |
1000 |
|
- |
| Cl 5.2, Table 4(Soundness) |
- |
700 |
|
- |
| Cl 5.2, Table 5(Mechanical Resistance Of Set Neat Plaster ) |
- |
1000 |
|
- |
| Cl 5.2, Table 6(Residue On 1.18 mm IS Sieve Precent) |
- |
500 |
|
- |
| Cl 5.2, Table 7(Expansion On Setting %Max) |
- |
800 |
|
- |
| Cl 5.2, Table 7(Expansion On Setting %Max) |
- |
800 |
|
- |
| Cl 5.2, Table 6(Residue On 1.18 mm IS Sieve Precent) |
- |
500 |
|
- |
| Cl 5.2, Table 5(Mechanical Resistance Of Set Neat Plaster ) |
- |
1000 |
|
- |
| Cl 5.2, Table 4(Soundness) |
- |
700 |
|
- |
| Cl 5.2, Table 3(Transverse Strength) |
- |
1000 |
|
- |
| Cl 5.2, Table 2(Plaster Sand Mixture & Neat Plaster) |
- |
1000 |
|
- |
|
10 Mar, 2027 |
-
- |
| 11163 |
IDMA LABORATORIES LIMITED, PANCHKULA
| 9123236
| IS 14364 (1996) |
Quarternary ammonium compound based surface cleaner, liquid - Specification |
- |
19000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1(Description) |
- |
500 |
|
Total testing charges including Keeping Quality are Rs. 19000/-
Testing charges excluding Keeping Quality are Rs. 9500/- |
| 4.2(Composition) |
- |
0 |
|
- |
| 4.3(Odour) |
- |
500 |
|
- |
| 4.4(Colour) |
- |
500 |
|
- |
| 4.5(Stability) |
- |
1500 |
|
- |
| 4.6(Cleaning Property) |
- |
1500 |
|
- |
| 4.7(Applicability) |
- |
1000 |
|
- |
| 4.8(Keeping Quality) |
- |
9500 |
|
- |
| 4.9, table 1(i)(Total non-volatile matter, % by mass, Min) |
- |
1500 |
|
- |
| 4.9, table 1(ii)(Ph) |
- |
1000 |
|
- |
| 4.9, table 1(iii)(QAC content, % by mass, Min) |
- |
1500 |
|
- |
|
31 Dec, 2026 |
-
Included w.e.f. 09.02.2024
For complete range with all types/grades/varietes |
| 11164 |
IDMA LABORATORIES LIMITED, PANCHKULA
| 9123236
| IS 12124 (2023) |
Rubberseed Fatty Acids - Specification (first revision of IS 12124) |
- |
14500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1.1(Description - IS 12124:2023) |
- |
1000 |
|
- |
| 4.3, Table 1 (i)(Moisture - IS 548 (Part 1/Sec 2) : 2021) |
- |
1500 |
|
- |
| 4.3, Table 1 (ii)(Saponification - IS 548 (Part 1/Sec 2) : 2021) |
- |
1500 |
|
- |
| 4.3, Table 1 (iii)("Acid value shall not differ
from saponification value - IS 548 (Part 1/Sec 2) : 2021 ") |
- |
1500 |
|
- |
| 4.3,Table 1 (iv)(Iodine Value - IS 548 (Part 1/Sec 2) : 2021) |
- |
1500 |
|
- |
| 4.3, Table 1 (v)(Mineral Acidity - IS 12124:2023) |
- |
1000 |
|
- |
| 4.3, Table 1 (vi)(Ash - IS 12124:2023) |
- |
1500 |
|
- |
| 4.3, Table 1 (vii)(Unsaponifiable matter - IS 548 (Part 1/Sec 2) : 2021) |
- |
1500 |
|
- |
| 4.3, Table 1 (viii)(Titre - IS 548 (Part 1/Sec 2) : 2021) |
- |
1500 |
|
- |
| 4.3, Table 1 (ix)(Colour - Pale Yellow - IS 548 (Part 1/Sec 2) : 2021) |
- |
1000 |
|
- |
| 4.1.1, 4.3, Table 1 (x)(Flash Point - IS 1448 (P-21): 2019) |
- |
1000 |
|
- |
| 4.1.1(Description - IS 12124:2023) |
- |
0 |
|
Testing charges already mentioned above |
| 4.3, Table 1 (i)(Moisture - IS 548 (Part 1/Sec 2) : 2021) |
- |
0 |
|
Testing charges already mentioned above |
| 4.3, Table 1 (ii)(Saponification - IS 548 (Part 1/Sec 2) : 2021) |
- |
0 |
|
Testing charges already mentioned above |
| 4.3, Table 1 (iii)("Acid value shall not differ
from saponification value - IS 548 (Part 1/Sec 2) : 2021 ") |
- |
0 |
|
Testing charges already mentioned above |
| 4.3,Table 1 (iv)(Iodine Value - IS 548 (Part 1/Sec 2) : 2021) |
- |
0 |
|
Testing charges already mentioned above |
| 4.3, Table 1 (v)(Mineral Acidity - IS 12124:2023) |
- |
0 |
|
Testing charges already mentioned above |
| 4.3, Table 1 (vi)(Ash - IS 12124:2023) |
- |
0 |
|
Testing charges already mentioned above |
| 4.3, Table 1 (vii)(Unsaponifiable matter - IS 548 (Part 1/Sec 2) : 2021) |
- |
0 |
|
Testing charges already mentioned above |
| 4.3, Table 1 (viii)(Titre - IS 548 (Part 1/Sec 2) : 2021) |
- |
0 |
|
Testing charges already mentioned above |
| 4.3, Table 1 (ix)(Colour - Pale Yellow - IS 548 (Part 1/Sec 2) : 2021) |
- |
0 |
|
Testing charges already mentioned above |
| 4.1.1, 4.3, Table 1 (x)(Flash Point - IS 1448 (P-21): 2019) |
- |
0 |
|
Testing charges already mentioned above |
|
31 Dec, 2026 |
-
Included w.e.f. 09.02.2024
For complete range with all types/grades/varietes |
| 11165 |
IDMA LABORATORIES LIMITED, PANCHKULA
| 9123236
| IS 12029 (2023) |
Acid Oil - Specification (first revision of IS 12029) |
- |
15000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1(Iodine Value) |
- |
1000 |
|
- |
| 4.2 Table 1 (i)(Total Fatty Matter (TFM) - IS 286 : 2018) |
- |
2000 |
|
- |
| 4.2 Table 1 (ii)(Moisture and volatile matter - IS 286 : 2018) |
- |
1500 |
|
- |
| 4.2 Table 1 (iii)(Free fatty Acid - IS 548 (Part 1/Sec 2) : 2021) |
- |
2000 |
|
- |
| 4.2 Table 1 (iv)(Free Mineral Acid ( As H₂SO₄) - IS 12029:2023) |
- |
1500 |
|
- |
| 4.2 Table 1 (v)(Unsaponifiable matter - IS 548 (Part 1/Sec 2) : 2021) |
- |
2000 |
|
- |
| 4.2 Table 1 (vi)(Oxidized Fatty Acid - IS 12029:2023) |
- |
2000 |
|
- |
| 4.2 Table 1 (vii)(Iron - IS 12029:2023) |
- |
1500 |
|
- |
| 4.2 Table 1 (viii)(Ash - IS 12029:2023) |
- |
1500 |
|
- |
| 4.1(Iodine Value) |
- |
0 |
|
Testing charges already mentioned above |
| 4.2 Table 1 (i)(Total Fatty Matter (TFM) - IS 286 : 2018) |
- |
0 |
|
Testing charges already mentioned above |
| 4.2 Table 1 (ii)(Moisture and volatile matter - IS 286 : 2018) |
- |
0 |
|
Testing charges already mentioned above |
| 4.2 Table 1 (iii)(Free fatty Acid - IS 548 (Part 1/Sec 2) : 2021) |
- |
0 |
|
Testing charges already mentioned above |
| 4.2 Table 1 (iv)(Free Mineral Acid ( As H₂SO₄) - IS 12029:2023) |
- |
0 |
|
Testing charges already mentioned above |
| 4.2 Table 1 (v)(Unsaponifiable matter - IS 548 (Part 1/Sec 2) : 2021) |
- |
0 |
|
Testing charges already mentioned above |
| 4.2 Table 1 (vi)(Oxidized Fatty Acid - IS 12029:2023) |
- |
0 |
|
Testing charges already mentioned above |
| 4.2 Table 1 (vii)(Iron - IS 12029:2023) |
- |
0 |
|
Testing charges already mentioned above |
| 4.2 Table 1 (viii)(Ash - IS 12029:2023) |
- |
0 |
|
Testing charges already mentioned above |
|
31 Dec, 2026 |
-
Included w.e.f. 09.02.2024
For complete range with all types/grades/varietes |
| 11166 |
DELHI TEST HOUSE, Azadhpur
| 8131406
| IS 17780 (2021) |
FORTIFIED RICE-SPECIFICATION |
- |
62000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1(Description) |
- |
1000 |
|
- |
| 4.1.4(Fortified rice kernels shall be uniformly distributed
in fortified rice.) |
- |
1000 |
|
- |
| 4.1.5(5 Fortified rice shall be free from added colouring
matter, foreign matter, metal pieces, mold, weevils,
obnoxious substances, discolouration, poisonous seeds,
rodent hair, excreta) |
- |
8000 |
|
- |
| 4.2(Pesticides/insecticides residues, poisonous
metals, naturally occurring toxic substances and other
contaminants (if any) in fortified rice shall not exceed
the limit as prescribed in the Food Safety and Standards
(Contaminants, Toxins and Residues) Regulations,
2011) |
- |
2000 |
|
- |
| 4.1.2 4.1.5 and 8.1(i) Moisture content, percent by mass, Max) |
- |
2000 |
|
- |
| 4.1.2 4.1.5 and 8.1(Foreign matter1)
(a) Inorganic, percent by mass, Max) |
- |
2000 |
|
- |
| 4.1.2 4.1.5 and 8.1(iii) Weevilled kernels, percent by mass, Max) |
- |
2000 |
|
- |
| 4.1.2 4.1.5 and 8.1(iv) Heat – Damaged Kernels , percent by mass, Max) |
- |
2000 |
|
- |
| 4.1.2 4.1.5 and 8.1(v) Damaged Kernels, percent by mass, Max) |
- |
2000 |
|
- |
| 4.1.2 4.1.5 and 8.1(vi) Kernels with pin point, percent by mass, Max) |
- |
1000 |
|
- |
| 4.1.2 4.1.5 and 8.1(vii) Immature Kernels, percent by mass, Max) |
- |
1000 |
|
- |
| 4.1.2 4.1.5 and 8.1(viii) Chalky Kernels, percent by mass, Max) |
- |
1000 |
|
- |
| 4.1.2 4.1.5 and 8.1(ix) Uric acid, mg/kg, Max) |
- |
1000 |
|
- |
| 4.1.2 4.1.5 and 8.1(x) Aflatoxin B1, µg/kg, Max) |
- |
2000 |
|
- |
| 4.1.3 and 8.1(i) Iron, mg/kg) |
- |
2000 |
|
- |
| 4.1.3 and 8.1(ii) Folic acid, µg/kg) |
- |
2000 |
|
- |
| 4.1.3 and 8.1(iii) Vitamin B12, µg/kg) |
- |
2000 |
|
- |
| 4.4 and 8.1(i) Zinc, mg/kg) |
- |
2000 |
|
- |
| 4.4 and 8.1(ii) Vitamin A, µg/kg) |
- |
2000 |
|
- |
| 4.4 and 8.1(iv) Thiamine (vitamin B1), mg/kg) |
- |
2000 |
|
- |
| 4.4 and 8.1(v) Riboflavin (vitamin B2), mg/kg) |
- |
2000 |
|
- |
| 4.4 and 8.1(vi) Niacin (vitamin B3), mg/kg) |
- |
2000 |
|
- |
| 4.4 and 8.1(vii) Pyridoxine (vitamin B6), mg/kg) |
- |
2000 |
|
- |
| 4.1(Description) |
- |
1000 |
|
- |
| 4.1.4(Fortified rice kernels shall be uniformly distributed
in fortified rice.) |
- |
1000 |
|
- |
| 4.1.5(5 Fortified rice shall be free from added colouring
matter, foreign matter, metal pieces, mold, weevils,
obnoxious substances, discolouration, poisonous seeds,
rodent hair, excreta) |
- |
8000 |
|
- |
| 4.2(Pesticides/insecticides residues, poisonous
metals, naturally occurring toxic substances and other
contaminants (if any) in fortified rice shall not exceed
the limit as prescribed in the Food Safety and Standards
(Contaminants, Toxins and Residues) Regulations,
2011) |
- |
2000 |
|
- |
| 4.1.2 4.1.5 and 8.1(i) Moisture content, percent by mass, Max) |
- |
2000 |
|
- |
| 4.1.2 4.1.5 and 8.1(Foreign matter1)
(a) Inorganic, percent by mass, Max) |
- |
1000 |
|
- |
| 4.1.2 4.1.5 and 8.1(iii) Weevilled kernels, percent by mass, Max) |
- |
2000 |
|
- |
| 4.1.2 4.1.5 and 8.1(iv) Heat – Damaged Kernels , percent by mass, Max) |
- |
2000 |
|
- |
| 4.1.2 4.1.5 and 8.1(v) Damaged Kernels, percent by mass, Max) |
- |
2000 |
|
- |
| 4.1.2 4.1.5 and 8.1(vi) Kernels with pin point, percent by mass, Max) |
- |
2000 |
|
- |
| 4.1.2 4.1.5 and 8.1(vii) Immature Kernels, percent by mass, Max) |
- |
2000 |
|
- |
| 4.1.2 4.1.5 and 8.1(viii) Chalky Kernels, percent by mass, Max) |
- |
2000 |
|
- |
| 4.1.2 4.1.5 and 8.1(ix) Uric acid, mg/kg, Max) |
- |
2000 |
|
- |
| 4.1.2 4.1.5 and 8.1(x) Aflatoxin B1, µg/kg, Max) |
- |
2000 |
|
- |
| 4.1.3 and 8.1(i) Iron, mg/kg) |
- |
2000 |
|
- |
| 4.1.3 and 8.1(ii) Folic acid, µg/kg) |
- |
2000 |
|
- |
| 4.1.3 and 8.1(iii) Vitamin B12, µg/kg) |
- |
2000 |
|
- |
| 4.4 and 8.1(i) Zinc, mg/kg) |
- |
2000 |
|
- |
| 4.4 and 8.1(ii) Vitamin A, µg/kg) |
- |
2000 |
|
- |
| 4.4 and 8.1(iv) Thiamine (vitamin B1), mg/kg) |
- |
2000 |
|
- |
| 4.4 and 8.1(v) Riboflavin (vitamin B2), mg/kg) |
- |
2000 |
|
- |
| 4.4 and 8.1(vi) Niacin (vitamin B3), mg/kg) |
- |
2000 |
|
- |
| 4.4 and 8.1(vii) Pyridoxine (vitamin B6), mg/kg) |
- |
2000 |
|
- |
| 4.1.2 4.1.5 and 8.1(Foreign matter1)
(b) Organic, percent by mass, Max) |
- |
1000 |
|
- |
| 4.1(Description) |
- |
- |
|
- |
| 4.1.4(Fortified rice kernels shall be uniformly distributed
in fortified rice.) |
- |
- |
|
- |
| 4.1.5(5 Fortified rice shall be free from added colouring
matter, foreign matter, metal pieces, mold, weevils,
obnoxious substances, discolouration, poisonous seeds,
rodent hair, excreta) |
- |
- |
|
- |
| 4.2(Pesticides/insecticides residues, poisonous
metals, naturally occurring toxic substances and other
contaminants (if any) in fortified rice shall not exceed
the limit as prescribed in the Food Safety and Standards
(Contaminants, Toxins and Residues) Regulations,
2011) |
- |
- |
|
- |
| 4.1.2 4.1.5 and 8.1(i) Moisture content, percent by mass, Max) |
- |
- |
|
- |
| 4.1.2 4.1.5 and 8.1(Foreign matter1)
(a) Inorganic, percent by mass, Max) |
- |
- |
|
- |
| 4.1.2 4.1.5 and 8.1(iii) Weevilled kernels, percent by mass, Max) |
- |
- |
|
- |
| 4.1.2 4.1.5 and 8.1(iv) Heat – Damaged Kernels , percent by mass, Max) |
- |
- |
|
- |
| 4.1.2 4.1.5 and 8.1(v) Damaged Kernels, percent by mass, Max) |
- |
- |
|
- |
| 4.1.2 4.1.5 and 8.1(vi) Kernels with pin point, percent by mass, Max) |
- |
- |
|
- |
| 4.1.2 4.1.5 and 8.1(vii) Immature Kernels, percent by mass, Max) |
- |
- |
|
- |
| 4.1.2 4.1.5 and 8.1(viii) Chalky Kernels, percent by mass, Max) |
- |
- |
|
- |
| 4.1.2 4.1.5 and 8.1(ix) Uric acid, mg/kg, Max) |
- |
- |
|
- |
| 4.1.2 4.1.5 and 8.1(x) Aflatoxin B1, µg/kg, Max) |
- |
- |
|
- |
| 4.1.3 and 8.1(i) Iron, mg/kg) |
- |
- |
|
- |
| 4.1.3 and 8.1(ii) Folic acid, µg/kg) |
- |
- |
|
- |
| 4.1.3 and 8.1(iii) Vitamin B12, µg/kg) |
- |
- |
|
- |
| 4.4 and 8.1(i) Zinc, mg/kg) |
- |
- |
|
- |
| 4.4 and 8.1(ii) Vitamin A, µg/kg) |
- |
- |
|
- |
| 4.4 and 8.1(iv) Thiamine (vitamin B1), mg/kg) |
- |
- |
|
- |
| 4.4 and 8.1(v) Riboflavin (vitamin B2), mg/kg) |
- |
- |
|
- |
| 4.4 and 8.1(vi) Niacin (vitamin B3), mg/kg) |
- |
- |
|
- |
| 4.4 and 8.1(vii) Pyridoxine (vitamin B6), mg/kg) |
- |
- |
|
- |
| 4.1.2 4.1.5 and 8.1(Foreign matter1)
(b) Organic, percent by mass, Max) |
- |
- |
|
- |
|
17 Jun, 2027 |
-
Included w.e.f. 11.09.2023 |
| 11167 |
IDMA LABORATORIES LIMITED, PANCHKULA
| 9123236
| IS 12067 (2023) |
Palm fatty acids - Specification (first revision of IS 12067) |
- |
17000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1&4.2(Description) |
- |
500 |
|
Rs. 1000/- for Freedom from sediments as per Clause no. 4.2 |
| Cl.4.3 (i)(Moisture - 6 of IS 548 (Part 1/Sec 2)) |
- |
1000 |
|
- |
| Cl. 4.3 (ii)(Saponification Value - 16 of IS 548 (Part 1/Sec 2)) |
- |
1500 |
|
- |
| Cl. 4.3 (iii)(Acid Value - 8 of IS 548 (Part 1/Sec 2)) |
- |
1500 |
|
- |
| Cl. 4.3 (iv)(Iodine Value - 15 of IS 548 (Part 1/Sec 2)) |
- |
1000 |
|
- |
| Cl. 4.3 (v)(Mineral Acidity - ANNEX A2 of IS 12067:2023) |
- |
1000 |
|
- |
| Cl. 4.3 (vi)(Ash - ANNEX A1 of IS 12067:2023) |
- |
1000 |
|
- |
| Cl. 4.3 (vii)(Unsaponifiable matter - 9 of IS 548 (Part 1/ Sec 2)) |
- |
1500 |
|
- |
| Cl. 4.3 (viii)(Titre Test - 13 of IS 548 (Part 1/Sec 2)) |
- |
1000 |
|
- |
| Cl. 4.3 (ix)(Colour - 14.1 of IS 548 (Part 1/Sec 2)) |
- |
1000 |
|
- |
| Cl. 4.3 (x)(Flash point - IS 1448 (Part 21)) |
- |
1000 |
|
- |
| 4.4, Table 2 (i)(C6 : 0) |
- |
4000 |
|
- |
| 4.4, Table 2 (ii)(C8 : 0) |
- |
0 |
|
Testing charges already mentioned above at 4.4, Table 2 (i) (C6 : 0) are Rs. 4000/- |
| 4.4, Table 2 (iii)(C10 : 0) |
- |
0 |
|
Testing charges already mentioned above at 4.4, Table 2 (i) (C6 : 0) are Rs. 4000/- |
| 4.4, Table 2 (iv)(C12 : 0) |
- |
0 |
|
Testing charges already mentioned above at 4.4, Table 2 (i) (C6 : 0) are Rs. 4000/- |
| 4.4, Table 2 (v)(C14 : 0) |
- |
0 |
|
Testing charges already mentioned above at 4.4, Table 2 (i) (C6 : 0) are Rs. 4000/- |
| 4.4, Table 2 (vi)(C16 : 0) |
- |
0 |
|
Testing charges already mentioned above at 4.4, Table 2 (i) (C6 : 0) are Rs. 4000/- |
| 4.4, Table 2 (vii)(C16 :1) |
- |
0 |
|
Testing charges already mentioned above at 4.4, Table 2 (i) (C6 : 0) are Rs. 4000/- |
| 4.4, Table 2 (viii)(C17 : 0) |
- |
0 |
|
Testing charges already mentioned above at 4.4, Table 2 (i) (C6 : 0) are Rs. 4000/- |
| 4.4, Table 2 (ix)(C17 : 1) |
- |
0 |
|
Testing charges already mentioned above at 4.4, Table 2 (i) (C6 : 0) are Rs. 4000/- |
| 4.4, Table 2 (x)(C18 : 0) |
- |
0 |
|
Testing charges already mentioned above at 4.4, Table 2 (i) (C6 : 0) are Rs. 4000/- |
| 4.4, Table 2 (xi)(C18 : 1) |
- |
0 |
|
Testing charges already mentioned above at 4.4, Table 2 (i) (C6 : 0) are Rs. 4000/- |
| 4.4, Table 2 (xii)(C18 : 2) |
- |
0 |
|
Testing charges already mentioned above at 4.4, Table 2 (i) (C6 : 0) are Rs. 4000/- |
| 4.4, Table 2 (xiii)(C18 : 3) |
- |
0 |
|
Testing charges already mentioned above at 4.4, Table 2 (i) (C6 : 0) are Rs. 4000/- |
| 4.4, Table 2 (xiv)(C20 : 0) |
- |
0 |
|
Testing charges already mentioned above at 4.4, Table 2 (i) (C6 : 0) are Rs. 4000/- |
| 4.4, Table 2 (xv)(C20 : 1) |
- |
0 |
|
Testing charges already mentioned above at 4.4, Table 2 (i) (C6 : 0) are Rs. 4000/- |
| 4.4, Table 2 (xvi)(C20 : 2) |
- |
0 |
|
Testing charges already mentioned above at 4.4, Table 2 (i) (C6 : 0) are Rs. 4000/- |
| 4.4, Table 2 (xvii)(C22 : 0) |
- |
0 |
|
Testing charges already mentioned above at 4.4, Table 2 (i) (C6 : 0) are Rs. 4000/- |
| 4.4, Table 2 (xviii)(C22 : 1) |
- |
0 |
|
Testing charges already mentioned above at 4.4, Table 2 (i) (C6 : 0) are Rs. 4000/- |
| 4.4, Table 2 (xix)(C22 : 2) |
- |
0 |
|
Testing charges already mentioned above at 4.4, Table 2 (i) (C6 : 0) are Rs. 4000/- |
| 4.4, Table 2 (xx)(C24 : 0) |
- |
0 |
|
Testing charges already mentioned above at 4.4, Table 2 (i) (C6 : 0) are Rs. 4000/- |
| 4.4, Table 2 (xxi)(C24 : 1) |
- |
0 |
|
Testing charges already mentioned above at 4.4, Table 2 (i) (C6 : 0) are Rs. 4000/- |
|
31 Dec, 2026 |
-
Included w.e.f. 20.11.2023 |
| 11168 |
IDMA LABORATORIES LIMITED, PANCHKULA
| 9123236
| IS 3383 (2023) |
SULPHUR WETTABLE POWDERS SPECIFICATION |
- |
6500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.1(Description - IS 3383:2023) |
- |
500 |
|
- |
| 3.2.1 & 3.2 Table 1 (i)(Sulphr Content - IS 3383:2023) |
- |
1000 |
|
- |
| 3.2 Table 1 (ii)(Material passing through 45 micron IS Sieve - IS 6940:1982) |
- |
1000 |
|
- |
| 3.2 Table 1 (iii)(Suspensibility, after accelerated storage - IS 6940:1982) |
- |
2000 |
|
- |
| 3.2 Table 1 (iv)(Wettability - IS 6940:1982) |
- |
1000 |
|
- |
| 3.2 Table 1 (v)(Arsenic (as As) - IS 3383:2023) |
- |
1000 |
|
- |
|
31 Dec, 2026 |
-
Included w.e.f. 20.11.2023 |
| 11169 |
IDMA LABORATORIES LIMITED, PANCHKULA
| 9123236
| IS 9366 (2023) |
QUINALPHOS GRANULES SPECIFICATION |
- |
7000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.2.1(Description - IS 9366:2023) |
- |
500 |
|
- |
| 3.2.2(Sieve Test (Upper Declared Limit) - IS 6940:1982) |
- |
600 |
|
- |
| 3.2.2(Sieve Test (Lower Declared Limit) - IS 6940:1982) |
- |
600 |
|
- |
| 3.2.2.1(Ratio of lower to upper mimit of sieve size) |
- |
200 |
|
- |
| 3.2.3(Dust 75 Micron sieve- IS 6940:1982) |
- |
1500 |
|
- |
| 3.2.4(Moisture content - IS 6940:1982) |
- |
1000 |
|
- |
| 3.3.1(Quinalphos Content - IS 8072:2023) |
- |
1600 |
|
- |
| 2.3.2(Acidity (as H2SO4) - IS 6940:1982) |
- |
1000 |
|
- |
| 2.3.3(Alkalinity (as NaOH)- IS 9366:2023) |
- |
0 |
|
Testing charges already mentioned above at 2.3.2 (Acidity (as H2SO4) are Rs. 1000/- |
|
31 Dec, 2026 |
-
Included w.e.f. 20.11.2023 |
| 11170 |
PIONEER TESTING LABORATORY PRIVATE LIMITED
| 8176806
| IS 3087 (2005) |
Practicle boards of wood and other lingnocellulosic materials (medium density) for general purposes -Specification |
All Type |
21000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 1 (i) Table 1(Density Variation (Flat Pressed Single Layer)) |
- |
500 |
|
- |
| 1 (i) Table 1(Density Variation (Flat Pressed Three Layer grade 1)) |
- |
500 |
|
- |
| 1 (i) Table 1(Density Variation (Flat Pressed Three Layer grade 2)) |
- |
500 |
|
- |
| 1 (i) Table 1(Density Variation (Extrusion Pressed Solids) XPS) |
- |
500 |
|
- |
| 1 (i) Table 1(Density Variation (Extrusion Pressed Tubular) XPS) |
- |
500 |
|
- |
| 1 (ii) (a) Table 1(Water absorption, 2h soacking (Flat Pressed Single Layer)) |
- |
400 |
|
- |
| 1 (ii) (a) Table 1(Water absorption, 2h soacking (Flat Pressed Three Layer grade 1)) |
- |
400 |
|
- |
| 1 (ii) (a) Table 1(Water absorption, 2h soacking (Flat Pressed Three Layer grade 2)) |
- |
400 |
|
- |
| 1 (ii) (a) Table 1(Water absorption, 2h soacking (Extrusion Pressed Solids) XPS) |
- |
400 |
|
- |
| 1 (ii) (a) Table 1(Water absorption, 2h soacking (Extrusion Pressed Tubular) XPS) |
- |
400 |
|
- |
| 1 (ii) Table 1 (b)(Water absorption, 24h soacking (Flat Pressed Single Layer)) |
- |
400 |
|
- |
| 1 (ii) (b) Table 1 (Water absorption, 24h soacking (Flat Pressed Three Layer grade 1)) |
- |
400 |
|
- |
| 1 (ii) (b) Table 1 (Water absorption, 24h soacking (Flat Pressed Three Layer grade 2)) |
- |
400 |
|
- |
| 1 (ii) (b) Table 1 (Water absorption, 24h soacking (Extrusion Pressed Solids) XPS) |
- |
400 |
|
- |
| 1 (ii) (b) Table 1 (Water absorption, 24h soacking (Extrusion Pressed Tubular) XPS) |
- |
400 |
|
- |
| 1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Flat Pressed Single Layer)) |
- |
500 |
|
- |
| 1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Flat Pressed Three Layer grade 1)) |
- |
500 |
|
- |
| 1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Flat Pressed Three Layer grade 2)) |
- |
500 |
|
- |
| 1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Extrusion Pressed Solids) XPS) |
- |
500 |
|
- |
| 1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Extrusion Pressed Tubular) XPS) |
- |
500 |
|
- |
| 1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Flat Pressed Single Layer)) |
- |
500 |
|
- |
| 1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Flat Pressed Three Layer grade 1)) |
- |
500 |
|
- |
| 1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Flat Pressed Three Layer grade 2)) |
- |
500 |
|
- |
| 1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Extrusion Pressed Solids) XPS) |
- |
500 |
|
- |
| 1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Extrusion Pressed Tubular) XPS) |
- |
500 |
|
- |
| 1 (iv) Table 1(Thickness swelling, Width (Flat Pressed Single Layer)) |
- |
500 |
|
- |
| 1 (iv) Table 1(Thickness swelling, Width (Flat Pressed Three Layer grade 1)) |
- |
500 |
|
- |
| 1 (iv) Table 1(Thickness swelling, Width (Flat Pressed Three Layer grade 2)) |
- |
500 |
|
- |
| 1 (iv) Table 1(Thickness swelling, Width (Extrusion Pressed Solids) XPS) |
- |
500 |
|
- |
| 1 (iv) Table 1(Thickness swelling, Width (Extrusion Pressed Tubular) XPS) |
- |
500 |
|
- |
| 1 (v) Table 1(Swelling in thickness due to surface absorption, (Flat Pressed Single Layer)) |
- |
1000 |
|
- |
| 1 (v) Table 1(Swelling in thickness due to surface absorption, (Flat Pressed Three Layer grade 1)) |
- |
1000 |
|
- |
| 1 (v) Table 1(Swelling in thickness due to surface absorption, (Flat Pressed Three Layer grade 2)) |
- |
1000 |
|
- |
| 1 (v) Table 1(Swelling in thickness due to surface absorption, (Extrusion Pressed Solids) XPS) |
- |
1000 |
|
- |
| 1 (v) Table 1(Swelling in thickness due to surface absorption, (Extrusion Pressed Tubular) XPS) |
- |
1000 |
|
- |
| 1 (vi) (a), Table 1(Modulus of rupture, Average (Flat Pressed Single Layer)) |
- |
600 |
|
- |
| 1 (vi) (a), Table 1(Modulus of rupture, Average (Flat Pressed Three Layer grade 1)) |
- |
600 |
|
- |
| 1 (vi) (a), Table 1(Modulus of rupture, Average (Flat Pressed Three Layer grade 2)) |
- |
600 |
|
- |
| 1 (vi) (a), Table 1(Modulus of rupture, Average (Extrusion Pressed Solids) XPS) |
- |
600 |
|
- |
| 1 (vi) (b), Table 1(Modulus of rupture, Minimum (Extrusion Pressed Tubular) XPT) |
- |
600 |
|
- |
| 1 (vii) (a), Table 1(Modulus of elasticity, Average (Flat Pressed Single Layer)) |
- |
600 |
|
- |
| 1 (vii) (a), Table 1(Modulus of elasticity, Average (Flat Pressed Three Layer grade 1)) |
- |
600 |
|
- |
| 1 (vii) (a), Table 1(Modulus of elasticity, Average (Flat Pressed Three Layer grade 2)) |
- |
600 |
|
- |
| 1 (vii) (a), Table 1(Modulus of elasticity, Average (Extrusion Pressed Solids) XPS) |
- |
600 |
|
- |
| 1 (vii) (a), Table 1(Modulus of elasticity, Average (Extrusion Pressed Tubular) XPT) |
- |
600 |
|
- |
| 1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Flat Pressed Single Layer)) |
- |
750 |
|
- |
| 1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface,Upto 20mm thickness (Flat Pressed Three Layer grade 1)) |
- |
750 |
|
- |
| 1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Flat Pressed Three Layer grade 2)) |
- |
750 |
|
- |
| 1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Extrusion Pressed Solids) XPS) |
- |
750 |
|
- |
| 1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Extrusion Pressed Tubular) XPT) |
- |
750 |
|
- |
| 7(Finish) |
- |
400 |
|
- |
| 8.3(Dimensional Tolerances) |
- |
1350 |
|
- |
| 9.2, 11.4(Moisture content) |
- |
400 |
|
- |
| 11.10(screw withdrawal strength) |
- |
500 |
|
- |
| 1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Extrusion Pressed Tubular) XPT) |
- |
750 |
|
- |
| 1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Extrusion Pressed Tubular) XPT) |
- |
750 |
|
- |
| 1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Extrusion Pressed Solids) XPS) |
- |
750 |
|
- |
| 1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Flat Pressed Three Layer grade 2)) |
- |
750 |
|
- |
| 1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface,Above 20mm thickness (Flat Pressed Three Layer grade 1)) |
- |
750 |
|
- |
| 1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Flat Pressed Single Layer)) |
- |
750 |
|
- |
| 1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Extrusion Pressed Tubular) XPT) |
- |
750 |
|
- |
| 1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Extrusion Pressed Solids) XPS) |
- |
750 |
|
- |
| 1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Flat Pressed Three Layer grade 2)) |
- |
750 |
|
- |
| 1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface,Upto 20mm thickness (Flat Pressed Three Layer grade 1)) |
- |
750 |
|
- |
| 1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Flat Pressed Single Layer)) |
- |
750 |
|
- |
| 1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Extrusion Pressed Tubular) XPT) |
- |
600 |
|
- |
| 1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Extrusion Pressed Solids) XPS) |
- |
600 |
|
- |
| 1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Flat Pressed Three Layer grade 2)) |
- |
600 |
|
- |
| 1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Flat Pressed Three Layer grade 1)) |
- |
600 |
|
- |
| 1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Flat Pressed Single Layer)) |
- |
600 |
|
- |
| 1 (vii) (a), Table 1(Modulus of elasticity, Average (Extrusion Pressed Tubular) XPT) |
- |
600 |
|
- |
| 1 (vii) (a), Table 1(Modulus of elasticity, Average (Extrusion Pressed Solids) XPS) |
- |
600 |
|
- |
| 1 (vii) (a), Table 1(Modulus of elasticity, Average (Flat Pressed Three Layer grade 2)) |
- |
600 |
|
- |
| 1 (vii) (a), Table 1(Modulus of elasticity, Average (Flat Pressed Three Layer grade 1)) |
- |
600 |
|
- |
| 1 (vii) (a), Table 1(Modulus of elasticity, Average (Flat Pressed Single Layer)) |
- |
600 |
|
- |
| 1 (vi) (b), Table 1(Modulus of rupture, Minimum (Extrusion Pressed Tubular) XPT) |
- |
600 |
|
- |
| 1 (vi) (b), Table 1(Modulus of rupture, Minimum (Extrusion Pressed Solids) XPS) |
- |
600 |
|
- |
| 1 (vi) (b), Table 1(Modulus of rupture, Minimum (Flat Pressed Three Layer grade 2)) |
- |
600 |
|
- |
| 1 (vi) (b), Table 1(Modulus of rupture, Minimum (Flat Pressed Three Layer grade 1)) |
- |
600 |
|
- |
| 1 (vi) (b), Table 1(Modulus of rupture, Minimum (Flat Pressed Single Layer)) |
- |
600 |
|
- |
| 1 (vi) (a), Table 1(Modulus of rupture, Average (Extrusion Pressed Tubular) XPS) |
- |
600 |
|
- |
| 1 (vi) (a), Table 1(Modulus of rupture, Average (Extrusion Pressed Solids) XPS) |
- |
600 |
|
- |
| 1 (vi) (a), Table 1(Modulus of rupture, Average (Flat Pressed Three Layer grade 2)) |
- |
600 |
|
- |
| 1 (vi) (a), Table 1(Modulus of rupture, Average (Flat Pressed Three Layer grade 1)) |
- |
600 |
|
- |
| 1 (v) Table 1(Swelling in thickness due to surface absorption, (Extrusion Pressed Tubular) XPS) |
- |
500 |
|
- |
| 1 (v) Table 1(Swelling in thickness due to surface absorption, (Extrusion Pressed Solids) XPS) |
- |
500 |
|
- |
| 1 (v) Table 1(Swelling in thickness due to surface absorption, (Flat Pressed Three Layer grade 2)) |
- |
500 |
|
- |
| 1 (v) Table 1(Swelling in thickness due to surface absorption, (Flat Pressed Three Layer grade 1)) |
- |
500 |
|
- |
| 1 (v) Table 1(Swelling in thickness due to surface absorption, (Flat Pressed Single Layer)) |
- |
500 |
|
- |
| 1 (iv) Table 1(Thickness swelling, Width (Extrusion Pressed Tubular) XPS) |
- |
500 |
|
- |
| 1 (iv) Table 1(Thickness swelling, Width (Extrusion Pressed Solids) XPS) |
- |
500 |
|
- |
| 1 (iv) Table 1(Thickness swelling, Width (Flat Pressed Three Layer grade 2)) |
- |
500 |
|
- |
| 1 (iv) Table 1(Thickness swelling, Width (Flat Pressed Three Layer grade 1)) |
- |
500 |
|
- |
| 1 (iv) Table 1(Thickness swelling, Width (Flat Pressed Single Layer)) |
- |
500 |
|
- |
| 1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Extrusion Pressed Tubular) XPS) |
- |
500 |
|
- |
| 1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Extrusion Pressed Solids) XPS) |
- |
500 |
|
- |
| 1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Flat Pressed Three Layer grade 2)) |
- |
500 |
|
- |
| 1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Flat Pressed Three Layer grade 1)) |
- |
500 |
|
- |
| 1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Flat Pressed Single Layer)) |
- |
500 |
|
- |
| 1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Extrusion Pressed Tubular) XPS) |
- |
500 |
|
- |
| 1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Extrusion Pressed Solids) XPS) |
- |
500 |
|
- |
| 1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Flat Pressed Three Layer grade 2)) |
- |
500 |
|
- |
| 1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Flat Pressed Three Layer grade 1)) |
- |
500 |
|
- |
| 1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Flat Pressed Single Layer)) |
- |
500 |
|
- |
| 1 (ii) (b) Table 1 (Water absorption, 24h soacking (Extrusion Pressed Tubular) XPS) |
- |
400 |
|
- |
| 1 (vi) (a), Table 1(Modulus of rupture, Average (Flat Pressed Single Layer)) |
- |
600 |
|
- |
| 1 (ii) (b) Table 1 (Water absorption, 24h soacking (Extrusion Pressed Solids) XPS) |
- |
400 |
|
- |
| 1 (ii) (b) Table 1 (Water absorption, 24h soacking (Flat Pressed Three Layer grade 2)) |
- |
400 |
|
- |
| 1 (ii) (b) Table 1 (Water absorption, 24h soacking (Flat Pressed Three Layer grade 1)) |
- |
400 |
|
- |
| 1 (ii) Table 1 (b)(Water absorption, 24h soacking (Flat Pressed Single Layer)) |
- |
400 |
|
- |
| 1 (ii) (a) Table 1(Water absorption, 2h soacking (Extrusion Pressed Tubular) XPS) |
- |
400 |
|
- |
| 1 (ii) (a) Table 1(Water absorption, 2h soacking (Extrusion Pressed Solids) XPS) |
- |
400 |
|
- |
| 1 (ii) (a) Table 1(Water absorption, 2h soacking (Flat Pressed Three Layer grade 2)) |
- |
400 |
|
- |
| 1 (ii) (a) Table 1(Water absorption, 2h soacking (Flat Pressed Three Layer grade 1)) |
- |
400 |
|
- |
| 1 (ii) (a) Table 1(Water absorption, 2h soacking (Flat Pressed Single Layer)) |
- |
400 |
|
- |
| 1 (i) Table 1(Density Variation (Extrusion Pressed Tubular) XPS) |
- |
500 |
|
- |
| 1 (i) Table 1(Density Variation (Extrusion Pressed Solids) XPS) |
- |
500 |
|
- |
| 1 (i) Table 1(Density Variation (Flat Pressed Three Layer grade 2)) |
- |
500 |
|
- |
| 1 (i) Table 1(Density Variation (Flat Pressed Three Layer grade 1)) |
- |
500 |
|
- |
| 1 (i) Table 1(Density Variation (Flat Pressed Single Layer)) |
- |
500 |
|
- |
| 1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Extrusion Pressed Solids) XPS) |
- |
750 |
|
- |
| 1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Flat Pressed Three Layer grade 2)) |
- |
750 |
|
- |
| 1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface,Above 20mm thickness (Flat Pressed Three Layer grade 1)) |
- |
750 |
|
- |
| 1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Flat Pressed Single Layer)) |
- |
750 |
|
- |
| 1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Extrusion Pressed Tubular) XPT) |
- |
600 |
|
- |
| 1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Extrusion Pressed Solids) XPS) |
- |
600 |
|
- |
| 1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Flat Pressed Three Layer grade 2)) |
- |
600 |
|
- |
| 1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Flat Pressed Three Layer grade 1)) |
- |
600 |
|
- |
| 1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Flat Pressed Single Layer)) |
- |
600 |
|
- |
| 1 (vi) (b), Table 1(Modulus of rupture, Minimum (Extrusion Pressed Solids) XPS) |
- |
600 |
|
- |
| 1 (vi) (b), Table 1(Modulus of rupture, Minimum (Flat Pressed Three Layer grade 2)) |
- |
600 |
|
- |
| 1 (vi) (b), Table 1(Modulus of rupture, Minimum (Flat Pressed Three Layer grade 1)) |
- |
600 |
|
- |
| 1 (vi) (b), Table 1(Modulus of rupture, Minimum (Flat Pressed Single Layer)) |
- |
600 |
|
- |
| 1 (vi) (a), Table 1(Modulus of rupture, Average (Extrusion Pressed Tubular) XPS) |
- |
600 |
|
For BIS samples: 1.5 times of BIS testing charges (10% discount to BIS) |
|
10 Mar, 2027 |
-
- |
| 11171 |
IDMA LABORATORIES LIMITED, PANCHKULA
| 9123236
| IS 8072 (2023) |
QUINALPHOS TECHNICAL SPECIFICATION |
- |
7000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.1(Description - IS 8072:2023) |
- |
500 |
|
- |
| 3.2 Table 1 (i)(Quinalphos Content - IS 8072:2023) |
- |
1500 |
|
- |
| 3.2 Table 1 (ii)(Moisture Content - IS 6940:1982) |
- |
1000 |
|
- |
| 3.2 Table 1 (iii)(Relative Density at 27/27°C - IS 6940:1982) |
- |
1500 |
|
- |
| 3.2 Table 1 (iv)(Material insoluble in Acetone - IS 6940:1982) |
- |
1500 |
|
- |
| 3.2 Table 1 (v)(Acidity (as H2SO4) - IS 6940:1982) |
- |
1000 |
|
- |
| 3.1(Description - IS 8072:2023) |
- |
0 |
|
Testing charges already mentioned above |
| 3.2 Table 1 (i)(Quinalphos Content - IS 8072:2023) |
- |
0 |
|
Testing charges already mentioned above |
| 3.2 Table 1 (ii)(Moisture Content - IS 6940:1982) |
- |
0 |
|
Testing charges already mentioned above |
| 3.2 Table 1 (iii)(Relative Density at 27/27°C - IS 6940:1982) |
- |
0 |
|
Testing charges already mentioned above |
| 3.2 Table 1 (iv)(Material insoluble in Acetone - IS 6940:1982) |
- |
0 |
|
Testing charges already mentioned above |
| 3.2 Table 1 (v)(Acidity (as H2SO4) - IS 6940:1982) |
- |
0 |
|
Testing charges already mentioned above |
|
31 Dec, 2026 |
-
Included w.e.f. 20.11.2023 |
| 11172 |
BIS, Central Laboratory (CL)
| None
| IS 4572 (2022) |
Fibre ropes - Polyamide 3- 4- 8- and 12- strand ropes (fifth revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6, Table 1, 2 and 3 (Linear Density) |
- |
|
|
|
| 6, Table 1, 2 and 3 (Minimum Breaking Strength) |
- |
|
|
|
| 5.1 - Type A (3- strand hawser-laid rope) |
- |
|
|
|
| 5.1 - Type B (4-strand shroud-laid rope) |
- |
|
|
|
| 5.1 - Type L (8-strand braided rope) |
- |
|
|
|
| 5.1 - Type T (12-strand braided rope) |
- |
|
|
|
| 6 (Physical properties) |
- |
|
|
|
|
- |
-
- |
| 11173 |
IRCLASS Systems And Solutions Private Limited, Jaipur
| 8179206
| IS 2052 (2023) |
Compounded feeds for cattle � Specification |
- |
3450 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.3 Table no.1 (i)(Moisture/4 of IS 7874 (Part 1)) |
- |
200 |
|
NA |
| Cl no.4.3,7.1, Table no. 1(ii)(Crude protein (N × 6.25)) |
- |
500 |
|
NA |
| Cl no.4.3, 7.1,Table no. 1(iii)(Crude fat) |
- |
500 |
|
NA |
| Cl no.4.3 ,7.1, Table no. 1(iv)(Crude fibre) |
- |
600 |
|
NA |
| Cl no.4.3 ,7.1, Table no. 1(v)(Acid insoluble ash) |
- |
300 |
|
NA |
| Cl no.4.3,7.1Table no. 1(vi)("Salt (as NaCl based on Na or
Cl), percent by mass") |
- |
500 |
|
NA |
| Cl no.4.3,7.1,Table no. 1(viii)(Total phosphorus) |
- |
450 |
|
NA |
| Cl no.4.3 ,7.1, Table no. 1(x)(Urea, percent by mass) |
- |
400 |
|
NA |
| Cl no.4.3 ,7.1, Table no. 1(xv)(Cadmium) |
- |
1000 |
|
NA |
|
06 Aug, 2027 |
-
- |
| 11174 |
BIS, Central Laboratory (CL)
| None
| IS 12406 (2021) |
Medium density fibre boards for general purpose - Specification |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Clauses 5.2, 9 and 10.2.2 (Density) |
- |
|
|
|
| Clauses 5.2, 9 and 10.2.2 (Density) |
- |
|
|
|
| Clauses 5.2, 9 and 10.2.2 (Variation from mean density) |
- |
|
|
|
| Clauses 5.2, 9 and 10.2.2 (Moisture Content) |
- |
|
|
|
| Clauses 5.2, 9 and 10.2.2 (Variation from mean moisture content) |
- |
|
|
|
| Clauses 5.2, 9 and 10.2.2 (Linear expansion
(Thickness Swelling in Water)
Due to general Absorption after 24h soaking) |
- |
|
|
|
| Clauses 5.2, 9 and 10.2.2 (Internal Bond Strength) |
- |
|
|
|
| Clauses 5.2, 9 and 10.2.2 (Modulus of Rupture
a) Avg. Value
b) Min. Individual) |
- |
|
|
|
| Clauses 5.2, 9 and 10.2.2 (Modulus of Elasticity
a) Avg. Value
b) Min. Individual) |
- |
|
|
|
| Clauses 5.2, 9 and 10.2.2 (Screw withdrawl strength
(i) Face
(ii) Edge (For thickness >12mm)) |
- |
|
|
|
| 8 (DIMENSIONS AND TOLERANCES) |
- |
|
|
|
| Clauses 5.2, 9 and 10.2.2 (Formaldehyde Content
(i) For Formaldehyde Class, E1
(ii) For Formaldehyde Class, E2) |
- |
|
|
|
|
- |
-
Exclusion : Test Facility not avaialble for requirements such as CL 9 -Internal bond strength,
Sample Test Parameter not available in CL: "Cl.s 5.2, 9 and Cl.10.2.2 Table Cl.3,4 Linear expansion, Internal bond strength (After cyclic test,After accelerated water
resistance test), Modulus of rupture, Modulus of elasticity"
Existing Sample Size: One Board For All Tests
Sample Size without dimensional measurements: Length-1200 mm, width-1200 |
| 11175 |
BIS, Central Laboratory (CL)
| None
| IS 17545 (2021) |
WHITE CEMENT BASED POLYMERIC PUTTY |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.5 , Table 1 , 1) , iii) (Setting time Initial, Min Final, Max) |
- |
|
|
|
| 4.6 , Table 2 , 1) , i) (Compressive strength, 28 days, Min) |
- |
|
|
|
|
- |
-
Not pertains to cement chemical |
| 11176 |
PIONEER TESTING LABORATORY PRIVATE LIMITED
| 8176806
| IS 14811 (2000) |
Rolled copper plate, sheet, strip and foils for general engineering purposes - Specification |
All Type |
9150 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl.12(Calculation of mass) |
- |
350 |
|
- |
| Cl.11 Table-4(Preferred Inside Diameter) |
- |
200 |
|
- |
| Cl.11(Dimensions and tolerances) |
- |
200 |
|
- |
| Cl.10(Hydrogen embrittlement test) |
- |
0 |
|
- |
| Cl.9 table-3(Cupping test, erichsen value) |
- |
1500 |
|
- |
| Cl.8.3 Table-2(Longitudinal Bend Test Angle, radius) |
- |
500 |
|
- |
| Cl.8.3 Table-2(Transverse Bend Test Angle, radius) |
- |
500 |
|
- |
| Cl.8.3(Bend test) |
- |
500 |
|
- |
| Cl.8.1 Table-1(Hardness) |
- |
1500 |
|
- |
| Cl.8.1 Table-1(Elongation percent) |
- |
1000 |
|
- |
| Cl.8.1 Table-1(Tensile strength Mpa) |
- |
1000 |
|
- |
| Cl.7(Chemical composition) |
- |
5500 |
|
- |
| Cl.6(Freedom from defects) |
- |
200 |
|
- |
| Cl.6(Freedom from defects) |
- |
500 |
|
- |
| Cl.7(Chemical composition) |
- |
5500 |
|
- |
| Cl.8(Mechnical properties) |
- |
0 |
|
- |
| Cl.8.1 Table-1(Tensile strength Mpa) |
- |
1000 |
|
- |
| Cl.8.1 Table-1(Elongation percent) |
- |
1000 |
|
- |
| Cl.8.1 Table-1(Hardness) |
- |
1500 |
|
- |
| Cl.8.3(Bend test) |
- |
500 |
|
- |
| Cl.8.3 Table-2(Transverse Bend Test Angle, radius) |
- |
500 |
|
- |
| Cl.8.3 Table-2(Longitudinal Bend Test Angle, radius) |
- |
500 |
|
- |
| Cl.9 table-3(Cupping test, erichsen value) |
- |
1500 |
|
- |
| Cl.10(Hydrogen embrittlement test) |
- |
0 |
|
- |
| Cl.11(Dimensions and tolerances) |
- |
200 |
|
- |
| Cl.11 Table-4(Preferred Inside Diameter) |
- |
200 |
|
- |
| Cl.12(Calculation of mass) |
- |
350 |
|
- |
| Cl.8(Mechnical properties) |
- |
0 |
|
- |
|
10 Mar, 2027 |
-
Exclusion: Cl.10 (Hydrogen Embrittlement) |
| 11177 |
PIONEER TESTING LABORATORY PRIVATE LIMITED
| 8176806
| IS 13801 (2013) |
Chequered Cement Concrete Tiles - |
All Type |
7200 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| (Cl 7, 8 &9)(Length, Breadth, Thickness, Difference in length of side between the longest side and shorterst side in the sample shall not exceed 1 mm, Half tiles, Difference in Thickness between the thickest and thinnest tile in the sample shall not exceed 10 percent of minimum thickness, Depth of chequred groove, Thickness of wearing layer.) |
- |
1300 |
|
- |
| Cl 12.1(Concavity & Convexity ) |
- |
1000 |
|
- |
| Cl 12.2(Longest gap between the arms of the square and the edge of the title shall not exceed 2 percent of the length.) |
- |
1000 |
|
- |
| Cl 12.3(Shall not exceed 1 percent of the length of the edge.) |
- |
1200 |
|
- |
| Cl 12.4(Water absorption) |
- |
600 |
|
- |
| Cl 12.5(Wet transverse strength) |
- |
1500 |
|
- |
| Cl 12.6(Resistance to wear) |
- |
1500 |
|
- |
| Cl 11(Finish) |
- |
500 |
|
- |
| 8.3(Thickness of wearing layer) |
- |
500 |
|
- |
|
10 Mar, 2027 |
-
- |
| 11178 |
BIS, Western Regional Laboratory (WRL)
| None
| IS 15450 (2022) |
Polyethylene-aluminium-polyethylene composite pressure pipes for hot and cold water supplies Specifications first revision of IS 15450 |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 9 (DIMENSIONS OF PIPE) |
- |
|
|
|
| 11.2 (Melt Flow Rate (Method of test as per Table 3)) |
- |
|
|
|
| 11.5 (Carbon Black Content and Dispersion (Method of test as per Table 3)) |
- |
|
|
|
| 11.9 (Apparent Tensile Strength of Pipe) |
- |
|
|
|
| 11.10 (Minimum Burst Pressure) |
- |
|
|
|
| 11.4 (Thermal Stability to Oxidation) |
- |
|
|
|
| 11.5 (Carbon Black Content and Dispersion) |
- |
|
|
|
| 11.3 (Overall Migration) |
- |
|
|
|
|
- |
-
The following test facilities are not available:
(1) Density Test
(2) ADHESION TEST
(3) APPARENT TENSILE STRENGTH TEST
(4) Hydrostatic Pressure test (Short & Long)
(5)Pigment Dispersion |
| 11179 |
PIONEER TESTING LABORATORY PRIVATE LIMITED
| 8176806
| IS 12823 (2015) |
Prelaminated Particle Boards from Wood and other Lignocellulosic Material - Specification ( First Revision ) |
All Type |
14650 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 4(Grades & Types) |
- |
200 |
|
- |
| Cl 6(Manufacture) |
- |
200 |
|
- |
| Cl 7(Finish) |
- |
400 |
|
- |
| Cl 8(Dimensions & Tolerances) |
- |
1250 |
|
- |
| Cl 10.2(Test For Density) |
- |
500 |
|
- |
| Cl 10.3(Test For Moisture Content) |
- |
500 |
|
- |
| Cl 10.4(For Water AbsorptionTest ) |
- |
750 |
|
- |
| Cl 10.5(For Swelling in water Test ) |
- |
750 |
|
- |
| Cl 10.6(Tesr For Modulus Of Elasticity & Mudulus Of Rupture) |
- |
1500 |
|
- |
| Cl 10.7(For Determination of Tensile Strength Perpendicular to Surface) |
- |
1000 |
|
- |
| Cl 10.8(For Determination of Tensile Strength Perpendicular to Surface After Ageing Test) |
- |
1000 |
|
- |
| Cl 10.9(Test For Screw Withdrawal Strength) |
- |
1000 |
|
- |
| Cl 10.10 & Annex C( Test For Abrasion Resistance) |
- |
1000 |
|
- |
| Cl 10.11 & Annex D( Test For Resistance to Steam) |
- |
1000 |
|
- |
| Cl 10.12 & Annex E( Test For Crack Resistance) |
- |
1200 |
|
- |
| Cl 10.14 & Annex G( Test For Resistance to Stain) |
- |
1200 |
|
- |
| Cl 10.15(Test for Formaldehyde Content/Emission) |
- |
12000 |
|
+ |
|
10 Mar, 2027 |
-
- |
| 11180 |
PIONEER TESTING LABORATORY PRIVATE LIMITED
| 8176806
| IS 6528 (1995) |
Stainless steel wire - Specification (First Revision) |
All Type |
11500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Table 7(Workmanship) |
- |
3500 |
|
- |
| Cl 6(Workmanship) |
- |
300 |
|
- |
| Cl 9.1 & Table 3(Diameter & Out Of Round) |
- |
400 |
|
- |
| Cl 10(UTM) |
- |
3500 |
|
- |
| 10.2(Reverse bend test-IS 1716) |
- |
800 |
|
- |
| 10.3(Torsion test- IS 1717) |
- |
1500 |
|
- |
| 10.4(Wrapping test-IS 1755) |
- |
1500 |
|
- |
| 15(Corrosion Resistance - IS:10461) |
- |
4500 |
|
- |
| Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Carbon) |
- |
300 |
|
- |
| Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Sulphor) |
- |
300 |
|
- |
| Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Phosphorous) |
- |
300 |
|
- |
| Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Manganese) |
- |
300 |
|
- |
| Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Silicon) |
- |
300 |
|
- |
| Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Aluminium) |
- |
300 |
|
- |
| Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Chromium) |
- |
300 |
|
- |
| Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Nickel) |
- |
300 |
|
- |
| Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Molybdenum) |
- |
300 |
|
- |
| Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Copper) |
- |
300 |
|
- |
| Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Boron) |
- |
300 |
|
- |
| Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Vanadium) |
- |
300 |
|
- |
| Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Titanium) |
- |
300 |
|
- |
| Table-1,( Clauses 7.1, 7.2, 7.3 and 12.1)(Nitrogen) |
- |
300 |
|
- |
|
10 Mar, 2027 |
-
- |
| 11181 |
PIONEER TESTING LABORATORY PRIVATE LIMITED
| 8176806
| IS 4270 (2001) |
Steel tubes used for water wells specification (Third Revision) |
All Type |
16750 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 6(Tensile Test & Flattening Test) |
- |
3200 |
|
- |
| Cl 7(Outer Diameter, Thickness, Mass & Straightness) |
- |
600 |
|
- |
| Cl 9(Pipe ends, Angle of bevel & Root Face ) |
- |
2500 |
|
- |
| Cl 10(Outer Diameter & Overall Length) |
- |
400 |
|
- |
| Cl 12(Bituminous Coating & Galvanizing ) |
- |
1500 |
|
- |
| Cl 14(Workmanship) |
- |
500 |
|
- |
| 5.2(phosphorus) |
- |
300 |
|
- |
| 5.2(sulphur) |
- |
300 |
|
- |
| 11.0(Alignment test IS 4270: 2001) |
- |
2000 |
|
- |
|
10 Mar, 2027 |
-
- |
| 11182 |
INDIAN RUBBER MATERIALS RESEARCH INSTITUTE (IRMRI)
| 7119305
| IS 9873 : Part 9 (2017) |
Safety of Toys Part 9 Certain Phthalates Esters in Toys and Children's Products |
Toy |
10000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.0(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP) - IS 9873 Part 6) |
- |
5000 |
|
-- |
| 3.0(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP) - IS 9873 Part 6) |
- |
5000 |
|
--- |
|
- |
-
Included w.e.f. 3-6-2021. |
| 11183 |
INDIAN RUBBER MATERIALS RESEARCH INSTITUTE (IRMRI)
| 7119305
| IS 9873 : Part 3 (2020) |
Safety of Toys Part 3 Migration of Certain Elements ( Third Revision ) |
- |
12000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1 - Table 1(Selenium (Se) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010) |
- |
1500 |
|
-- |
| 4.1 - Table 1(Mercury (Hg) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010) |
- |
1500 |
|
-- |
| 4.1 - Table 1(Lead (Pb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010) |
- |
1500 |
|
-- |
| 4.1 - Table 1(Chromium (Cr) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010) |
- |
1500 |
|
-- |
| 4.1 - Table 1(Cadmium (Cd) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010) |
- |
1500 |
|
-- |
| 4.1 - Table 1(Barium (Ba) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010) |
- |
1500 |
|
-- |
| 4.1 - Table 1(Arsenic (As) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010) |
- |
1500 |
|
-- |
| 4.1 - Table 1(Antimony (Sb) - Cl 7,8,9 of IS 9873-3 : 2017 and ISO 8124-3 : 2010) |
- |
1500 |
|
-- |
|
- |
-
Included w.e.f. 3-6-2021. |
| 11184 |
INDIAN RUBBER MATERIALS RESEARCH INSTITUTE (IRMRI)
| 7119305
| IS 12118 : Part 1 (1987) |
Specification for two - Part polysulphide - Based sealants: Part 1 general requirements |
Pouring Grade |
71000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.1.1.1(Pouring Grade Sealants) |
- |
11300 |
|
-- |
| 5.1.2(Plastic Deformation) |
- |
11300 |
|
-- |
| 5.1.3(Adhesion and Tensile Modulus) |
- |
11300 |
|
-- |
| 5.1.4(Application Life) |
- |
11300 |
|
-- |
| 5.1.5(Adhesion in Peel) |
- |
11300 |
|
---- |
| 5.1.6(Loss of Mass after Heat Ageing) |
- |
11300 |
|
----- |
| 5.1.7(Staining ) |
- |
11300 |
|
----- |
| 5.1.1.2(Gun Grade Sealant ) |
- |
4000 |
|
----- |
|
- |
-
Included w.e.f. 3-6-2021. |
| 11185 |
INDIAN RUBBER MATERIALS RESEARCH INSTITUTE (IRMRI)
| 7119305
| IS 9873 : Part 2 (2017) |
Safety of toys: Part 2 flammability (Third Revision) |
Flammability (Safety of Toys) |
3000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.2.2-5.2(Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy-Duration of the flame after the removal of the test flame) |
- |
3000 |
|
--- |
| 4.2.3-5.3(Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude less than 50 mm and more than 5 mm from the surface of the toy-Duration of the flame after the removal of the test flame) |
- |
3000 |
|
-- |
| 4.2.5-5.4(Toys to be worn on the head-Flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks)-rate of spread of flame) |
- |
3000 |
|
-- |
| 4.5-5.5(Soft-filled toys-Test for soft-filled toys
) |
- |
3000 |
|
-- |
|
- |
-
Included w.e.f. 3-6-2021 |
| 11186 |
INDIAN RUBBER MATERIALS RESEARCH INSTITUTE (IRMRI)
| 7119305
| IS 446 (2017) |
Rubber hoses, textile - Reinforced, for compressed air - Specification (Fifth Revision) |
RUBBER AIR HOSE |
34170 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5(Material and Construction) |
- |
900 |
|
-- |
| 6, Dimensions(Internal Diameter) |
- |
300 |
|
-- |
| 6, Dimensions(Concentricity) |
- |
500 |
|
-- |
| 6, Dimensions(Tolerance on Length) |
- |
300 |
|
--- |
| 6, Dimensions(Thickness of Lining of Type 1) |
- |
300 |
|
--- |
| 6, Dimensions(Thickness of Lining of Type 2) |
- |
300 |
|
-- |
| 6, Dimensions(Thickness of Lining of Type 3) |
- |
300 |
|
-- |
| 6, Dimensions(Thickness of Cover of Type 1) |
- |
300 |
|
-- |
| 6, Dimensions(Thickness of Cover of Type 2) |
- |
300 |
|
--- |
| 6, Dimensions(Thickness of Cover of Type 3) |
- |
300 |
|
-- |
| 7.1, Table 2(Tensile Strength of Lining) |
- |
950 |
|
-- |
| 7.1, Table 2(Tensile Strength of Cover) |
- |
950 |
|
-- |
| 7.1, Table 2(Elongation at Break of Lining of all types) |
- |
0 |
|
-- |
| 7.1, Table 2(Elongation at Break of Cover of all types) |
- |
0 |
|
-- |
| 7.1, Table 2(Accelerated Ageing for all types: Change in Tensile Strength of Lining of its original value) |
- |
1550 |
|
-- |
| 7.1, Table 2(Accelerated Ageing for all types: Change in Tensile Strength of Cover of its original value) |
- |
1550 |
|
-- |
| 7.1, Table 2(Accelerated Ageing for all types: Change in Elongation of Lining of its original value) |
- |
0 |
|
-- |
| 7.1, Table 2(Accelerated Ageing for all types: Change in Elongation of Cover of its original value) |
- |
0 |
|
--- |
| 7.1, Table 2(Resistance to Liquid , Increase in Volume (Class B only)-Lining) |
- |
850 |
|
--- |
| 7.1, Table 2(Resistance to Liquid , Increase in Volume (Class C only)-Lining) |
- |
850 |
|
-- |
| 7.1, Table 2(Resistance to Liquid , Increase in Volume (Class C only)-Cover) |
- |
850 |
|
-- |
| 7.2, Table 3(Adhesion between Components- Lining and Reinforcement) |
- |
1050 |
|
-- |
| 7.2, Table 3(Adhesion between Components- Reinforcement layers) |
- |
1050 |
|
-- |
| 7.2, Table 3(Adhesion between Components- Cover and Reinforcement) |
- |
1050 |
|
-- |
| 7.2, Table 3(Proof Pressure at 23°C for type 1) |
- |
1950 |
|
-- |
| 7.2, Table 3(Proof Pressure at 23°C for type 2) |
- |
1950 |
|
-- |
| 7.2, Table 3(Proof Pressure at 23°C for type 3) |
- |
1950 |
|
-- |
| 7.2, Table 3(Change in Length at Maximum working Pressure) |
- |
1950 |
|
--- |
| 7.2, Table 3(Change in Diameeter at Maximum working Pressure) |
- |
0 |
|
--- |
| 7.2, Table 3(Minimum Bursting Pressure for type 1) |
- |
1950 |
|
-- |
| 7.2, Table 3(Minimum Bursting Pressure for type 2) |
- |
1950 |
|
-- |
| 7.2, Table 3(Minimum Bursting Pressure for type 3) |
- |
1950 |
|
-- |
| 7.2, Table 3(Ozone Resistance) |
- |
2520 |
|
-- |
| 7.2, Table 3(Low temperature Flexibility) |
- |
1950 |
|
-- |
| 7.2, Table 3(Flexibility at 23°C) |
- |
1550 |
|
-- |
|
- |
-
REVISED VERSION OF IS 447:2017 INCLUDED W.E.F. 3-6-2021. |
| 11187 |
INDIAN RUBBER MATERIALS RESEARCH INSTITUTE (IRMRI)
| 7119305
| IS 9573 : Part 2 (2017) |
Rubber hose for liquefied petroleum gas (Lpg) - Specification: Part 2 domestic and commercial application (Fourth Revision) |
Rubber Hose for LPG-Specific Part 2 Domestic/Commercial |
18600 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Clause 4.1(General) |
- |
300 |
|
-- |
| Clause 4.2.2 (a)(Reinforcement) |
- |
300 |
|
-- |
| Clause 4.3
Sub Clause 4.3.1
Table 1(Bore Size) |
- |
300 |
|
--- |
| Clause 4.3
Sub Clause 4.3.2 (a)(Thickness of Lining and Cover) |
- |
300 |
|
-- |
| Clause 4.3
Sub Clause 4.3.3(Length) |
- |
300 |
|
-- |
| Clause 4.4
Sub Clause 4.4.1
Table 2 (i) (a)(Tensile Strength- Lining) |
- |
950 |
|
-- |
| Clause 4.4
Sub Clause 4.4.1
Table 2 (i) (b)(Tensile Strength- cover) |
- |
950 |
|
-- |
| Clause 4.4
Sub Clause 4.4.1
Table 2 (ii) (a)(Elongation at break- Lining) |
- |
0 |
|
-- |
| Clause 4.4
Sub Clause 4.4.1
Table 2 (ii) (b)(Elongation at break- Cover) |
- |
0 |
|
---- |
| Clause 4.4
Sub Clause 4.4.2
(a)(Accelerated Ageing Test lining) |
- |
1550 |
|
-- |
| Clause 4.4
Sub Clause 4.4.2
(b)(Accelerated Ageing Test lining) |
- |
0 |
|
-- |
| Clause 4.4
Sub Clause 4.4.2
(a)(Accelerated Ageing Test cover) |
- |
1550 |
|
-- |
| Clause 4.4
Sub Clause 4.4.2
(b)(Accelerated Ageing Test cover) |
- |
0 |
|
-- |
| Clause 4.4
Sub Clause 4.4.3
(a)(Resistance of Lining to n-pentane) |
- |
1800 |
|
-- |
| Clause 4.5
Sub clause 4.5.1(Adhesion) |
- |
1050 |
|
-- |
| Clause 4.5
Sub clause 4.5.2(Low Temperature Flexibility) |
- |
1950 |
|
-- |
| Clause 4.5
Sub clause 4.5.3(Flexibility of Hose) |
- |
1050 |
|
-- |
| Clause 4.5
Sub clause 4.5.4(Ozone Resistance) |
- |
750 |
|
--- |
| Clause 4.5
Sub clause 4.5.5
4.5.5.1(Proof pressure test) |
- |
1950 |
|
--- |
| Clause 4.5
Sub clause 4.5.5
4.5.5.2(Bursting pressure) |
- |
1950 |
|
-- |
| Clause 4.5
Sub clause 4.5.7(Burning Behaviour) |
- |
1050 |
|
-- |
| Clause 5.2
(a)(Marking
Manufacturer’s name or trade-mark, if any
) |
- |
300 |
|
-- |
| Clause 5.2
(b)(Marking
Words LPG, Max W.P. 1.0 MPa;
) |
- |
0 |
|
-- |
| Clause 5.2
(c)(Marking
Nominal bore, 1000111) |
- |
0 |
|
-- |
| Clause 5.2
(d)(Marking
Batch/Lot No.
) |
- |
0 |
|
-- |
| Clause 5.2
(e)(Marking
Month and year of manufacture
) |
- |
0 |
|
-- |
| Clause 5.2
(f)(Marking
IS 9573 (Part 2)
) |
- |
0 |
|
-- |
| Clause 5.2
(f)(Marking
ecommended to replace before (MONTH/YEAR)
) |
- |
0 |
|
-- |
| Clause 5.2.1(BIS Certification Marking
) |
- |
0 |
|
-- |
| Clause 4.5
Sub clause 4.5.6(Grip Strength Test) |
- |
250 |
|
-- |
|
- |
-
- |
| 11188 |
INDIAN RUBBER MATERIALS RESEARCH INSTITUTE (IRMRI)
| 7119305
| IS 9573 : Part 1 (2017) |
Rubber hose for liquefied petroleum gas (Lpg) - Specification: Part 1 industrial application (Fourth Revision) |
Rubber Hose for LPG-Specification Part 1 Industrial App |
21420 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Clause 4.1 (General) |
- |
300 |
|
--- |
| Clause 4.2.2(Reinforcement) |
- |
300 |
|
--- |
| Clause 4.3
Sub Clause 4.3.1
Table 1(Bore Size) |
- |
300 |
|
--- |
| Clause 4.3
Sub Clause 4.3.2 (a)(Thickness of Lining and Cover) |
- |
300 |
|
-- |
| Clause 4.3
Sub Clause 4.3.3(Length) |
- |
300 |
|
--- |
| Clause 4.4
Sub Clause 4.4.1
Table 2 (i) (a)(Tensile Strength- Lining) |
- |
950 |
|
--- |
| Clause 4.4
Sub Clause 4.4.1
Table 2 (i) (b)(Tensile Strength- cover) |
- |
950 |
|
--- |
| Clause 4.4
Sub Clause 4.4.1
Table 2 (ii) (a)(Elongation at break- Lining) |
- |
0 |
|
-- |
| Clause 4.4
Sub Clause 4.4.1
Table 2 (ii) (b)(Elongation at break- cover) |
- |
0 |
|
-- |
| Clause 4.4
Sub Clause 4.4.2
(a)(Accelerated Ageing Test lining) |
- |
1550 |
|
-- |
| Clause 4.4
Sub Clause 4.4.2
(b)(Accelerated Ageing Test lining) |
- |
0 |
|
-- |
| Clause 4.4
Sub Clause 4.4.2
(a)(Accelerated Ageing Test cover) |
- |
1550 |
|
-- |
| Clause 4.4
Sub Clause 4.4.2
(b)(Accelerated Ageing Test cover) |
- |
0 |
|
-- |
| Clause 4.5
Sub clause 4.5.1(Adhesion) |
- |
1050 |
|
-- |
| Clause 4.5
Sub clause 4.5.2(Low Temperature Flexibility) |
- |
1950 |
|
--- |
| Clause 4.5
Sub clause 4.5.3(Flexibility of Hose) |
- |
1050 |
|
-- |
| Clause 4.4
Sub Clause 4.4.3
(a)(Resistance of Lining to n-pentane) |
- |
1800 |
|
-- |
| Clause 4.5
Sub clause 4.5.6(Electrical Continuity Test) |
- |
1300 |
|
-- |
| Clause 4.5
Sub clause 4.5.4(Ozone Resistance) |
- |
2520 |
|
--- |
| Clause 4.5
Sub clause 4.5.5
4.5.5.1(Proof pressure test) |
- |
1950 |
|
-- |
| Clause 4.5
Sub clause 4.5.5
4.5.5.2(Bursting pressure) |
- |
1950 |
|
-- |
| Clause 4.5
Sub clause 4.5.7(Burning Behaviour) |
- |
1050 |
|
-- |
| Clause 5.2
(a)(Marking
Manufacturer’s name or trade-mark, if any
) |
- |
300 |
|
-- |
| Clause 5.2
(b)(Marking
Words LPG, Max W.P. 2.5 MPa;
) |
- |
0 |
|
--- |
| Clause 5.2
(c)(Marking
Nominal bore
) |
- |
0 |
|
-- |
| Clause 5.2
(d)(Marking
Batch/Lot No.
) |
- |
0 |
|
-- |
| Clause 5.2
(e)(Marking
Month and year of manufacture
) |
- |
0 |
|
-- |
| Clause 5.2
(f)(Marking
IS 9573 (Part 1)
) |
- |
0 |
|
-- |
| Clause 5.2.1(BIS Certification Marking
) |
- |
0 |
|
-- |
|
- |
-
- |
| 11189 |
INDIAN RUBBER MATERIALS RESEARCH INSTITUTE (IRMRI)
| 7119305
| IS 5382 (2018) |
Rubber seals - Joint rings for water supply, drainage and sewerage pipelines - Specification for materials (Second Revision) |
Rubber Seals-Joint Rings for Water Supply, Drainage |
81320 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.2.1(Dimensional tolerances) |
- |
600 |
|
-- |
| 4.2.2(Imperfections and defects) |
- |
0 |
|
-- |
| 4.2.3(Hardness, IRHD from buttons ) |
- |
1200 |
|
--- |
| 4.2.4(Tensile strength, MPa) |
- |
1900 |
|
-- |
| 4.2.2(i)In zones involved in sealing function) |
- |
0 |
|
-- |
| 4.2.2(ii) In zones not involved in sealing function) |
- |
0 |
|
--- |
| 4.2.5(Compression set in air) |
- |
0 |
|
-- |
| 4.2.5.2(Compression set at 23 ºC for 72 h) |
- |
5600 |
|
-- |
| 4.2.5.2(Compression set at 70 ºC for 24 h) |
- |
3400 |
|
-- |
| 4.2.5.3(Low temp compression set at -10 ºC for 72 h) |
- |
14840 |
|
-- |
| 4.2.6(Ageing 7 days at 70 ºC) |
- |
5600 |
|
-- |
| 4.2.6(Hardness, IRHD from buttons
Tensile strength, %
Elongation at break , %
) |
- |
3100 |
|
-- |
| 4.2.7(Stress relaxation, max) |
- |
14700 |
|
for 7 days |
| 4.2.8(Volume change in water , max/min
7 days at 70 ºC
) |
- |
7300 |
|
-- |
| 4.2.9(Ozone resistance) |
- |
10080 |
|
-- |
| 4.2.10(Spliced joint) |
- |
1800 |
|
-- |
| 4.2.10.2(Strength of Spliced Joints) |
- |
0 |
|
--- |
| 4.3.1(Low temperature performance - 25 degree C) |
- |
3900 |
|
--- |
| 4.3.2(Volume change in oil) |
- |
7300 |
|
--- |
|
- |
-
REVISED VERSION OF IS 5382:2018 INCLUDED W.E.F. 3-6-2021. |
| 11190 |
INDIAN RUBBER MATERIALS RESEARCH INSTITUTE (IRMRI)
| 7119305
| IS 3565 (2018) |
Teats for feeding bottles - Specification (First Revision) |
TEATS FOR FEEDING BOTTLES |
33000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Clause 5.3.1 Table 1 (iii) (Ash content) |
- |
950 |
|
-- |
| Clause 5.3.1 Table 1 (ii) (b) (Free sulphur) |
- |
2500 |
|
--- |
| Clause 5.2 ( sub clause 5.2.1)(Workmanship and Finish ) |
- |
300 |
|
-- |
| Clause 5.2 ( sub clause 5.2.2)(Shape & Size ) |
- |
0 |
|
-- |
| Clause 5.2 ( sub clause 5.2.3) Annex A.(Resistance to Autoclaving ) |
- |
1800 |
|
-- |
| Clause 5.3 ( sub clause 5.3.1)Requirement as per Table 1/ i Annex B(Water Extract a) pH) |
- |
500 |
|
--- |
| Clause 5.3 ( sub clause 5.3.1)Requirement as per Table 1/ i Annex B(b) Colour) |
- |
300 |
|
---- |
| Clause 5.3 ( sub clause 5.3.1)Requirement as per Table 1/ i Annex B(c) Turbidity
) |
- |
0 |
|
--- |
| Clause 5.3 ( sub clause 5.3.1)Requirement as per Table 1/ i Annex B(d) Odour) |
- |
0 |
|
--- |
| Clause 5.3 ( sub clause 5.3.1)Requirement as per Table 1/ ii Annex C(Acetone extract, percent: a) Acetone extracted material, percent by mass, Max) |
- |
1750 |
|
---- |
| Clause 5.3 ( sub clause 5.3.1)Requirement as per Table 1/ iv Annex E(Volatile components, percent Max) |
- |
500 |
|
---- |
| Clause 5.3 ( sub clause 5.3.3)Requirement as per Table 3/ i(Migration of Heavy Metals i) Antimony) |
- |
1400 |
|
--- |
| Clause 5.3 ( sub clause 5.3.3)Requirement as per Table 3/ i(ii) Arsenic) |
- |
750 |
|
--- |
| Clause 5.3 ( sub clause 5.3.3)Requirement as per Table 3/ i(iii) Chromium) |
- |
750 |
|
-- |
| Clause 5.3 ( sub clause 5.3.3)Requirement as per Table 3/ i(iv) Mercury) |
- |
750 |
|
--- |
| Clause 5.3 ( sub clause 5.3.3)Requirement as per Table 3/ i(v) Cadmium) |
- |
750 |
|
--- |
| Clause 5.3 ( sub clause 5.3.3)Requirement as per Table 3/ i(vi) Lead) |
- |
750 |
|
--- |
| Clause 5.3 ( sub clause 5.3.3)Requirement as per Table 3/ i(vii) Barium) |
- |
750 |
|
-- |
| Clause 5.3 ( sub clause 5.3.3)Requirement as per Table 3/ i(viii) Selenium) |
- |
750 |
|
-- |
| Clause 5.3 ( sub clause 5.3.4)Requirement as per Table 4/ i Annex G(i) N-Nitrosamines) |
- |
5000 |
|
-- |
| Clause 5.3 ( sub clause 5.3.4)Requirement as per Table 4/ ii Annex G(ii) N-Nitrosatables) |
- |
0 |
|
-- |
| Clause 5.3 ( sub clause 5.3.1)Requirement as per Table 1/ ii Annex C(Acetone extract, percent: a) Acetone extracted material, percent by mass, Max) |
- |
1750 |
|
-- |
| Clause 5.3.1 Table 1 (v) (Extractable protein content) |
- |
2400 |
|
-- |
| 5.3.5(Determination of MBT) |
- |
2400 |
|
-- |
| 5.3.6(Determination of Antioxidants) |
- |
2400 |
|
-- |
| Clause 5.4 ( sub clause 5.4.2) Tear Strength Annex K(Tear Strength) |
- |
1900 |
|
--- |
| Clause 5.4 ( sub clause 5.4.3)Tensile Test Annex L(Tensile Test) |
- |
1900 |
|
--- |
|
- |
-
REVISED VERSION OF IS 3565:2018 INCLUDED W.E.F. 3-6-2021. |
