BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15123 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

11371

BIS, Western Regional Laboratory (WRL)

None

IS 1166 (2022)

SWEETENED CONDENSED MILK, SWEETENED CONDENSED PARTLY SKIMMED MILK, SWEETENED CONDENSED SKIMMED MILK AND SWEETENED CONDENSD HIGH FAT MILK- SPECIFICATION (Third Revision of IS 1166)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
( Clauses 4.1 and 4.7) Tabel 1 (i) (Total milk solid)	-
( Clauses 4.1 and 4.7) Tabel 1 (ii) (Milk Fat)	-
( Clauses 4.1 and 4.7) Tabel 1 (iii) (Milk solid not fat)	-
( Clauses 4.1 and 4.7) Tabel 1 (iv) (Milk protien in milk solis not fat)	-
( Clauses 4.1 and 4.7) Tabel 1 (v) (Accelerated storage test)	-
"4.7 Table 2 (i) " (Aerobic plate count-IS 5402 (Part 1))	-
"4.7 Table 2 (ii) " (Coliform count-IS 5401 (Part 1))	-
(Clause 4.7) Tabel 2 (iii) (Staphylococcus Aureus (Coagulates positive))	-
(Clause 4.7) Tabel 2 (iv) (Yeast and mould count)	-
(Clause 4.7) Tabel 2 (v) (Salmonella)	-
(Clause 4.7) Tabel 2 (vi) (Listeria monocytogens)	-
(Clause 4.7) Tabel 2 (vii) (E Coli)	-

-
Test facilities are not available for the following: "1. Lead, Arsenic, Aflatoxin M1, Melamine 2. As per Cl. 5.7 The pesticide residues, heavy metals, toxins (aflatoxins and other naturally occurring toxins) and contaminants, if any, in the product shall not exceed the limits as prescribed in the Food Safety and Standards (Contaminants, Toxins and Residues) Regulations, 2011.’ "

11372

UL India Private limited, Gurgaon

8127226

IS 616 (2017)

Audio, video and similar electronic apparatus - Safety requirements (Fifth Revision)

180000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking and instructions)	-	2000	-
7(Heating under normal operating conditions)	-	17000	-
8(Constructional requirements with regard to the protection against electric shock)	-	8000	-
9(Electric shock hazard under normal operating conditions)	-	18000	-
10(Insulation requirements)	-	24000	-
11(Fault conditions)	-	15000	-
12(Mechanical strength)	-	14000	-
13(CLEARANCES and CREEPAGE DISTANCES)	-	12000	-
15(TERMINALS)	-	8000	-
16(External flexible cords)	-	5000	-
17(Electrical connections and mechanical fixings)	-	5000	-
19(Stability and mechanical hazards)	-	12000	-
20(Resistance to fire)	-	18000	-
3(General requirements)	-	0	-
4(General test conditions)	-	22000	-
Annex-A(Additional requirements for apparatus with protection against splashing water)	-	0	-
Annex-B(Apparatus to be connected to the TELECOMMUNICATION NETWORKS)	-	0	-
Cl.7.1 of Cl.7(General)	-	0	-
Cl.8.1 of Cl.8(Conductive parts covered by lacquer, paper, untreated textile oxide films and beads etc. considered to be bare*)	-	0	-
Cl.8.2 of Cl.8(No shock hazard when changing voltage setting device, fuse-links or handling drawers etc.)	-	0	-
Cl.8.3 of Cl.8(Insulation of hazardous live parts not provided by hygroscopic material)	-	0	-
Cl.8.4 of Cl.8(No risk of electric shock from accessible parts or from parts rendered accessible following the removal of a cover which can be removed by hand)	-	0	-
Cl.8.5 i) of Cl.8(Basic insulation between hazardous live parts and earthed accessible parts *)	-	0	-
Cl.8.5 iv) of Cl.8(Protective earthing terminal *)	-	0	-
Cl.8.6 of Cl.8(Class II apparatus)	-	0	-
Cl.8.8 of Cl.8(Insulation thickness and thin sheet materials)	-	0	-
Cl.8.9 of Cl.8(Adequate insulation between internal hazardous live conductors and accessible parts, or between internal hazardous live parts and conductors connected to accessible parts)	-	0	-
Cl.8.10 of Cl.8(Double insulation between accessible parts and conductors connected to the mains)	-	0	-
Cl.8.10 of Cl.8(Double insulation between conductors connected to accessible parts and parts connected to the mains)	-	0	-
Cl.8.11 of Cl.8(Detaching of wires)	-	0	-
Cl.8.12 of Cl.8(Adequate fastening of windows, lenses, lamp covers etc. (pull test 20 N for 10 s))	-	0	-
Cl.8.13 of Cl.8(Adequate fastening of windows, lenses, lamp covers etc. (pull test 20 N for 10 s))	-	0	-
Cl.8.14 of Cl.8(No risk of damage to the insulation of internal wiring due to hot parts or sharp edges)	-	0	-
Cl.8.15 of Cl.8(Only special supply equipment can be used*)	-	0	-
Cl.8.18 of Cl.8(Disconnection from the mains)	-	0	-
Cl.8.19 of Cl.8(Switch not fitted in the mains cord *)	-	0	-
Cl.8.21 of Cl.8(Non-separable thin sheet material)	-	0	-
Cl.12.1.2 of Cl.12.1(Bump test )	-	0	-
Cl.12.1.3 of Cl.12.1(Vibration test)	-	0	-
Cl.12.1.4 of Cl.12.1(Impact test)	-	0	-
Cl.12.1.5 of Cl.12.1(Drop test)	-	0	-
Cl.12.1.6 of Cl.12.1(Stress relief test)	-	0	-
Cl.12.2 of Cl.12(Fixing of actuating elements)	-	0	-
Cl.12.3 of Cl.12(Remote control devices held in hand)	-	0	-
Cl.12.4 of Cl.12(Drawers )	-	0	-
Cl.12.5 of Cl.12(Antenna coaxial sockets mounted on the apparatus)	-	0	-
Cl.12.6 of Cl.12(Telescoping or rod antennas)	-	0	-
Cl.12.7 of Cl.12(Apparatus containing coin / button cell batteries)	-	0	-
Cl.16.1 a) of Cl.16(Mains supply flexible cords shall be sheathed type, complying with IEC 60227 for PVC cords or as per IEC 60245 for synthetic rubber cords)	-	0	-
Cl.16.2 of Cl.16(Mains cords conductors shall have a nominal cross-sectional area not less than the values given in Table 18, for rated current consumption of the apparatus)	-	0	-
Cl.16.4 of Cl.16(Flexible cords used for connection between equipment have adequate cross-sectional areas to avoid temperature rise under normal and fault conditions)	-	0	-
Cl.16.5 a) of Cl.16(Adequate strain relief on external flexible cords)	-	0	-
Cl.16.6 of Cl.16(Apertures for external flexible cord: no risk of damage to the cord during assembly or movement in use)	-	0	-
Cl.16.7 a) of Cl.16(Transportable apparatus fitted with detachable cord sets with appliance inlet as perIEC60320-1 or)	-	0	-
Cl.19.2 of Cl.19(Test at 10° to the horizontal)	-	0	-
Cl.19.3 of Cl.19(Vertical force test )	-	0	-
Cl.19.4 of Cl.19(Horizontal force test)	-	0	-
Cl.19.5 of Cl.19(Test of edges and corners)	-	0	-
Cl.19.6 of Cl.19(Mechanical strength of glass)	-	0	-
Cl.19.7 of Cl.19(Wall or ceiling mounting means)	-	0	-
3(General requirements)	-	0	-
4(General test conditions)	-	0	-
5(Marking and instructions)	-	0	-
Cl.7.1 of Cl.7(General)	-	0	-
8(Constructional requirements with regard to the protection against electric shock)	-	0	-
9(Electric shock hazard under normal operating conditions)	-	0	-
10(Insulation requirements)	-	0	-
11(Fault conditions)	-	0	-
12(Mechanical strength)	-	0	-
13(CLEARANCES and CREEPAGE DISTANCES)	-	0	-
15(TERMINALS)	-	0	-
16(External flexible cords)	-	0	-
17(Electrical connections and mechanical fixings)	-	0	-
19(Stability and mechanical hazards)	-	0	-
20(Resistance to fire)	-	0	-
Annex-A(Additional requirements for apparatus with protection against splashing water)	-	0	-
Annex-B(Apparatus to be connected to the TELECOMMUNICATION NETWORKS)	-	0	-
3(General requirements)	-	0	-
4(General test conditions)	-	0	-
5(Marking and instructions)	-	0	-
Cl.7.1 of Cl.7(General)	-	0	-
8(Constructional requirements with regard to the protection against electric shock)	-	0	-
9(Electric shock hazard under normal operating conditions)	-	0	-
10(Insulation requirements)	-	0	-
11(Fault conditions)	-	0	-
12(Mechanical strength)	-	0	-
13(CLEARANCES and CREEPAGE DISTANCES)	-	0	-
15(TERMINALS)	-	0	-
16(External flexible cords)	-	0	-
17(Electrical connections and mechanical fixings)	-	0	-
19(Stability and mechanical hazards)	-	0	-
20(Resistance to fire)	-	0	-
Annex-A(Additional requirements for apparatus with protection against splashing water)	-	0	-
Annex-B(Apparatus to be connected to the TELECOMMUNICATION NETWORKS)	-	0	-
3(General requirements)	-	0	-
4(General test conditions)	-	0	-
5(Marking and instructions)	-	0	-
7(Heating under normal operating conditions)	-	0	-
8(Constructional requirements with regard to the protection against electric shock)	-	0	-
9(Electric shock hazard under normal operating conditions)	-	0	-
10(Insulation requirements)	-	0	-
11(Fault conditions)	-	0	-
12(Mechanical strength)	-	0	-
13(CLEARANCES and CREEPAGE DISTANCES)	-	0	-
15(TERMINALS)	-	0	-
16(External flexible cords)	-	0	-
17(Electrical connections and mechanical fixings)	-	0	-
19(Stability and mechanical hazards)	-	0	-
20(Resistance to fire)	-	0	-
15(Internal wires and power cords)	-	0	-
Annex-A(Additional requirements for apparatus with protection against splashing water)	-	0	-
Annex-B(Apparatus to be connected to the TELECOMMUNICATION NETWORKS)	-	0	-
Cl.5.1 of Cl.5(General requirements)	-	0	-
Cl.5.1-i) of Cl.5(Comprehensible and easily discernible)	-	0	-
Cl.5.1-ii) of Cl.5(Permanent durability against water and petroleum spirit)	-	0	-
Cl.5.2 of Cl.5(Identification and supply ratings)	-	0	-
Cl.5.2 a) of Cl.5(Identification, maker)	-	0	-
Cl.5.2 b) of Cl.5(Model number or type reference)	-	0	-
Cl.5.2 d) of Cl.5(Nature of supply)	-	0	-
Cl.5.2 e) of Cl.5(Rated supply voltage)	-	0	-
Cl.5.2 f) of Cl.5(Mains frequency if safety dependant)	-	0	-
Cl.5.2 g) of Cl.5(Rated current or power consumption for apparatus supplied by supply apparatus for general use, on apparatus or in instruction manual: Measured current or power consumption: Deviation % (max 10%):)	-	0	-
Cl.5.2 h) of Cl.5(Rated current or power consumption for apparatus intended for connection to an a.c. mains supply:Measured current or power consumption for Television set: Deviation % (max 10%):)	-	0	-
Cl.5.2 h)-i) of Cl.5(appliance coupler for Class I is used for Class II equipment with functional earth connection, the requirements of Clause 15 and Clause 16 related to Class I construction shall be applied up to the connecting point of the protective(earthing) conductor to the functional earth.)	-	0	-
Cl.5.2 h)-ii) of Cl.5(Graphical symbols placed on the apparatus, whether required by this standard or not, shall be in accordance with IEC 60417 or ISO 3864-2 or ISO 7000, if available. In the absence of suitable symbols, the manufacturer may design specific graphical symbols.)	-	0	-
Cl.5.2 h)-iii) of Cl.5(Care shall be taken so that additional markings and instructions not required by this standard do not contradict the markings and instructions required by this standard . Symbols placed on the Equipment shall be explained in the user manual.)	-	0	-
Cl.5.3 of Cl.5(Terminals)	-	0	-
Cl.5.3a) of Cl.5(Earth terminal)	-	0	-
Cl.5.3b) of Cl.5(Hazardous live terminals)	-	0	-
Cl.5.3c) of Cl.5(Markings on supply output terminals)	-	0	-
Cl.5.4 of Cl.5(Caution marking)	-	0	-
Cl.5.4a) of Cl.5(Use of triangle with exclamation mark)	-	0	-
Cl.5.4b) of Cl.5(Marking on loudspeaker grille, IEC 60417-5036)	-	0	-
Cl.5.4c) of Cl.5(User-replaceable coin / button cell battery marking)	-	0	-
Cl.5.5 of Cl.5(Instructions)	-	0	-
Cl.5.5 of Cl.5(Instructions)	-	0	-
Cl.5.5 of Cl.5(Instructions)	-	0	-
Cl.5.5.1 of Cl.5.5(Safety relevant information)	-	0	-
Cl.5.5.2 a) of Cl.5.5(Mains powered equipment not exposed to dripping or splashing. Warning concerning objects filled with liquid, etc.)	-	0	-
Cl.5.5.2 b) of Cl.5.5(Hazardous live terminals, instructions for wiring)	-	0	-
Cl.5.5.2 c) of Cl.5.5(Instructions for replacing lithium battery)	-	0	-
Cl.5.5.2 d) of Cl.5.5(Class I earth connection warning)	-	0	-
Cl.5.5.2 e) of Cl.5.5(Instructions for multimedia system connection)	-	0	-
Cl.5.5.2 f) of Cl.5.5(Special stability warning for attachment of the apparatus to the floor/wall)	-	0	-
Cl.5.5.2 g) of Cl.5.5(Warning: battery exposure to heat)	-	0	-
Cl.5.5.2 h) of Cl.5.5(Warning: protective film on CRT face)	-	0	-
Cl.5.5.2 i) of Cl.5.5("Warning: Non-floor standing TV >7kg")	-	0	-
Cl.5.5.2 j) of Cl.5.5("Warning: User replaceable coin / button cell battery")	-	0	-
Cl.5.5.3 (a-b) of Cl.5.5(Disconnect device: plug/coupler or all-pole mains switch location, accessibility and markings)	-	0	-
Cl.5.5.3 c) of Cl.5.5(Instructions for permanently connected equipment)	-	0	-
Cl.5.5.3 c) i) of Cl.5.5(Marking, signal lamps or similar for completely disconnection from the mains)	-	0	-
Cl.7.1 of Cl.7(General)	-	0	-
"Cl.7.1.1 of Cl.7.1 Table-3"(Requirements)	-	0	-
"Cl.7.1.2 of Cl.7.1 Table-3"(Accessible parts)	-	0	-
"Cl.7.1.3 of Cl.7.1 Table-3"(Parts, other than windings and printed boards, providing electrical insulation)	-	0	-
"Cl.7.1.4 of Cl.7.1 Table-3"(Parts acting as a support or a mechanical barrier)	-	0	-
"Cl.7.1.5 of Cl.7.1 Table-3"(Windings)	-	0	-
"Cl.7.1.6 of Cl.7.1 Table-3"(Parts not subject to a limit under7.1.1 to 7.1.4)	-	0	-
Cl.8.1 of Cl.8(Conductive parts covered by lacquer, paper, untreated textile oxide films and beads etc. considered to be bare*)	-	0	-
Cl.8.2 of Cl.8(No shock hazard when changing voltage setting device, fuse-links or handling drawers etc.)	-	0	-
Cl.8.3 of Cl.8(Insulation of hazardous live parts not provided by hygroscopic material)	-	0	-
Cl.8.4 of Cl.8(No risk of electric shock from accessible parts or from parts rendered accessible following the removal of a cover which can be removed by hand)	-	0	-
Cl.8.5 of Cl.8(Class I apparatus*)	-	0	-
Cl.8.5 i) of Cl.8(Basic insulation between hazardous live parts and earthed accessible parts *)	-	0	-
Cl.8.5 iv) of Cl.8(Protective earthing terminal *)	-	0	-
Cl.8.6 of Cl.8(Class II apparatus)	-	0	-
Cl.8.6 a) of Cl.8(Basic and supplementary insulation between hazardous live parts and accessible parts *)	-	0	-
Cl.8.6 b) of Cl.8(Reinforced insulation between hazardous live parts and accessible parts *)	-	0	-
Cl.8.8 of Cl.8(Insulation thickness and thin sheet materials)	-	0	-
Cl.8.8 i) of Cl.8(Basic or supplementary insulation > 0,4 mm (mm)*)	-	0	-
Cl.8.8 ii) of Cl.8(Reinforced insulation > 0,4 mm (mm) *)	-	0	-
Cl.8.8 iii) of Cl.8(Thin sheet material used inside the equipment)	-	0	-
Cl.8.8 iv) of Cl.8(Basic or supplementary insulation, atleast two layers, each meeting10.4)	-	0	-
Cl.8.8 v) of Cl.8(Basic or supplementary insulation, three layers any two of which meet10.4)	-	0	-
Cl.8.8 vi) of Cl.8(Reinforced insulation, two layers each of which meet 10.4)	-	0	-
Cl.8.9 of Cl.8(Adequate insulation between internal hazardous live conductors and accessible parts, or between internal hazardous live parts and conductors connected to accessible parts)	-	0	-
Cl.8.10 of Cl.8(Double insulation between accessible parts and conductors connected to the mains)	-	0	-
Cl.8.10 of Cl.8(Double insulation between conductors connected to accessible parts and parts connected to the mains)	-	0	-
Cl.8.11 of Cl.8(Detaching of wires)	-	0	-
Cl.8.11 i) of Cl.8(Noun due reduction of creepage or clearance distances if wires become detached)	-	0	-
Cl.8.11 ii) of Cl.8(Vibration test carried out)	-	0	-
Cl.8.12 of Cl.8(Adequate fastening of windows, lenses, lamp covers etc. (pull test 20 N for 10 s))	-	0	-
Cl.8.13 of Cl.8(Adequate fastening of windows, lenses, lamp covers etc. (pull test 20 N for 10 s))	-	0	-
Cl.8.14 of Cl.8(No risk of damage to the insulation of internal wiring due to hot parts or sharp edges)	-	0	-
Cl.8.15 of Cl.8(Only special supply equipment can be used*)	-	0	-
Cl.8.18 of Cl.8(Disconnection from the mains)	-	0	-
Cl.8.18 i) of Cl.8(Disconnect device used in apparatus)	-	0	-
Cl.8.18 ii) of Cl.8(All-pole switch or circuit breaker with >3mm contact separation.)	-	0	-
Cl.8.18 iii) of Cl.8(Mains switch ON indication *)	-	0	-
Cl.8.19 of Cl.8(Switch not fitted in the mains cord *)	-	0	-
Cl.8.21 of Cl.8(Non-separable thin sheet material)	-	0	-
Cl.9.1 of Cl.9(Testing on the outside)	-	0	-
Cl.9.1.1 of Cl.9.1(Requirements)	-	0	-
Cl.9.1.1 i) of Cl.9.1(Accessible parts shall not be hazardous live)	-	0	-
Cl.9.1.1 ii) of Cl.9.1(Inaccessible terminals are not accessible or comply with relevant requirements)	-	0	-
Cl.9.1.1 iii) of Cl.9.1(For voltages >1000 V ac or >1500 V dc complies with clause 13.3.1 for basic insulation)	-	0	-
Cl.9.1.1.2 of Cl.9.1.1(Determination of hazardous live parts)	-	0	-
Cl.9.1.1.2 a) of Cl.9.1.1(Open circuit voltages)	-	0	-
Touch current measured from terminal devices using the network in annex D(Touch current measured from terminal devices using the network in annex D)	-	0	-
Cl.9.1.1.2 c) of Cl.9.1.1(The charge exceeds 45 μC)	-	0	-
Cl.9.1.1.2 d) of Cl.9.1.1(Energy of discharge not exceeding 350 mJ)	-	0	-
Cl.9.1.1.3 of Cl.9.1.1(Test with test finger and test probe)	-	0	-
Cl.9.1.2 of Cl.9.1(Shafts of operating knobs, handles, levers and the like)	-	0	-
Cl.9.1.3 of Cl.9.1(Openings ofthe enclosure)	-	0	-
Cl.9.1.4 of Cl.9.1(Terminals)	-	0	-
Cl.9.1.4 i) of Cl.9.1(Terminals)	-	0	-
Cl.9.1.4 ii) of Cl.9.1(Terminals)	-	0	-
Cl.9.1.5 of Cl.9.1(Pre-set controls)	-	0	-
Cl.9.1.6 of Cl.9.1(Withdrawal of the mains plug:)	-	0	-
Cl.9.1.6 i) of Cl.9.1(Withdrawal of the mains plug:)	-	0	-
Cl.9.1.6 ii) of Cl.9.1(Withdrawal of the mains plug:)	-	0	-
Cl.9.1.6 iii) of Cl.9.1(Withdrawal of the mains plug:)	-	0	-
Cl.9.1.7 of Cl.9.1(Resistance to external forces)	-	0	-
Cl.9.1.7 a) of Cl.9.1(Resistance to external forces)	-	0	-
Cl.9.1.7 b) of Cl.9.1(Resistance to external forces)	-	0	-
Cl.9.1.7 c) of Cl.9.1(Resistance to external forces)	-	0	-
Cl.9.2 of Cl.9(Removal of protective covers)	-	0	-
Cl.10.2 of Cl.10(Surge Test)	-	0	-
Cl.10.2 a) of Cl.10(Surge Test)	-	0	-
Cl.10.2 b) of Cl.10(Surge Test)	-	0	-
Cl.10.2 b) (i) of Cl.10(Surge Test)	-	0	-
Cl.10.2 b) (ii) of Cl.10(Surge Test)	-	0	-
Cl.10.2 b) (iii) of Cl.10(Surge Test)	-	0	-
Cl.10.3 of Cl.10(Humidity treatment)	-	0	-
Cl.10.4 of Cl.10(Insulation resistance and dielectric strength)	-	0	-
Cl.10.4.1 of Cl.10.4(Insulation of the insulating materials)	-	0	-
Cl.10.4.2 of Cl.10.4(Between parts of different polarity directly connected to the mains Between parts of different polarity directly connected to the mains)	-	0	-
Cl.10.4.2 i) of Cl.10.4(Between parts separated by BASIC or SUPPLEMENTARY insulation)	-	0	-
Cl.10.4.2 ii) of Cl.10.4(Between parts separated by REINFORCED insulation)	-	0	-
Cl.11.1 of Cl.11(Electric Shock Hazard)	-	0	-
Cl.11.1 a) of Cl.11(Electric Shock Hazard)	-	0	-
Cl.11.1 b) of Cl.11(Electric Shock Hazard)	-	0	-
Cl.11.2 of Cl.11(Heating)	-	0	-
Cl.11.2.1 of Cl.11.2(Requirements)	-	0	-
Cl.11.2.1 i) of Cl.11.2(No danger of fire to the surroundings)	-	0	-
Cl.11.2.1 ii) of Cl.11.2(Safety not impaired by abnormal heat)	-	0	-
Cl.11.2.1 of Cl.11.2(Flames extinguish within 10 seconds)	-	0	-
Cl.11.2.1 of Cl.11.2(No hazard from softening solder)	-	0	-
Cl.11.2.1 of Cl.11.2(Soldered terminations not used as protective mechanism)	-	0	-
Cl.11.2.2 of Cl.11.2(Measurement of temperature rises)	-	0	-
Cl.11.2.3 of Cl.11.2(Accessible parts)	-	0	-
Cl.11.2.4 of Cl.11.2(Parts, other than windings and printed boards, providing electrical insulation)	-	0	-
Cl.11.2.5 of Cl.11.2(Parts acting as a support or a mechanical barrier)	-	0	-
Cl.11.2.6 of Cl.11.2(Windings )	-	0	-
Cl.11.2.7 of Cl.11.2(Printed boards)	-	0	-
Cl.11.2.7 i) of Cl.11.2(Printed boards)	-	0	-
Cl.11.2.7 i) a) of Cl.11.2(Printed boards)	-	0	-
Cl.11.2.7 i) b) of Cl.11.2(Printed boards)	-	0	-
Cl.11.2.7 ii) of Cl.11.2(Printed boards)	-	0	-
Cl.11.2.7 iii) of Cl.11.2(Printed boards)	-	0	-
Cl.11.2.8 of Cl.11.2(Parts not subject to a limit under7.1.1 to 7.1.4)	-	0	-
Cl.12.1.1 of Cl.12.1(Requirements)	-	0	-
Cl.12.1.2 of Cl.12.1(Bump test )	-	0	-
Cl.12.1.3 of Cl.12.1(Vibration test)	-	0	-
Cl.12.1.4 of Cl.12.1(Impact test)	-	0	-
Cl.12.1.4 i) of Cl.12.1(Impact test)	-	0	-
Cl.12.1.4 ii) of Cl.12.1(Impact test)	-	0	-
Cl.12.1.5 of Cl.12.1(Drop test)	-	0	-
Cl.12.1.6 of Cl.12.1(Stress relief test)	-	0	-
Cl.12.2 of Cl.12(Fixing of actuating elements)	-	0	-
Cl.12.3 of Cl.12(Remote control devices held in hand)	-	0	-
Cl.12.4 of Cl.12(Drawers )	-	0	-
Cl.12.5 of Cl.12(Antenna coaxial sockets mounted on the apparatus)	-	0	-
Cl.12.5 a) of Cl.12(Endurance test,)	-	0	-
Cl.12.5 b) of Cl.12(Impact test,)	-	0	-
Cl.12.5 c) of Cl.12(Torque test)	-	0	-
Cl.12.6 of Cl.12(Telescoping or rod antennas)	-	0	-
Cl.12.6.1 of Cl.12.6(General requirements)	-	0	-
Cl.12.6.1 i) of Cl.12.6(General requirements)	-	0	-
Cl.12.6.2 of Cl.12.6(Physical securement)	-	0	-
Cl.12.7 of Cl.12(Apparatus containing coin / button cell batteries)	-	0	-
Cl.12.7.1 of Cl.12.7(Coin/button cell batteries with a diameter of 32 mm or less.)	-	0	-
Cl.12.7.2 of Cl.12.7(Construction requirementss)	-	0	-
Cl.12.7.3 of Cl.12.7(Tests)	-	0	-
Cl.12.7.3.2 of Cl.12.7.3(Stress relief test)	-	0	-
Cl.12.7.3.3 of Cl.12.7.3(Battery replacement test)	-	0	-
Cl.12.7.3.4 of Cl.12.7.3(Drop test)	-	0	-
Cl.12.7.3.5 of Cl.12.7.3(Impact test)	-	0	-
Cl.12.7.3.6 of Cl.12.7.3(Crush test)	-	0	-
Cl.12.7.4 of Cl.12.7(Compliance)	-	0	-
Cl.13.1 of Cl.13(General)	-	0	-
Cl.13.2 of Cl.13(Determination of Working voltage)	-	0	-
Cl.13.3 of Cl.13(Clearances)	-	0	-
Cl.13.3.1 of Cl.13.3(General)	-	0	-
Cl.13.3.2 of Cl.13.3(Clearances in circuits conductively connected to the mains)	-	0	-
Cl.13.3.3 of Cl.13.3(Clearances in circuits not conductively connected to the mains)	-	0	-
Cl.13.3.4 of Cl.13(Measurement of transient voltages)	-	0	-
Cl.13.4 a) of Cl.13(Creepage distances )	-	0	-
Cl.13.4 b) of Cl.13(Creepage distances )	-	0	-
Cl.13.4 c) of Cl.13(Creepage distances )	-	0	-
Cl.13.6 a) of Cl.13(Jointed insulation )	-	0	-
Cl.13.6 b) of Cl.13(Jointed insulation )	-	0	-
Cl.13.6 c) of Cl.13(Jointed insulation )	-	0	-
Cl.13.6 d) of Cl.13(Jointed insulation )	-	0	-
Cl.13.7 of Cl.13(Enclosed and sealed parts)	-	0	-
Cl.13.8 of Cl.13(Parts filled with insulating compound, meeting the requirements of 8.8)	-	0	-
Cl.15.1 of Cl.15(Plugs and Sockets*)	-	0	-
Cl.15.1.2 of Cl.15.1(Design of connectors other than for mains power *)	-	0	-
Cl.15.1.2 i) of Cl.15.1(Design of sockets with symbol of 5.3 b) design *)	-	0	-
Cl.15.1.3 of Cl.15.1(Design of terminals and connectors used in output circuits of supply apparatus*)	-	0	-
Cl.15.2 of Cl.15(Provisions for protective earthing)	-	0	-
Cl.15.2 i) of Cl.15(Provisions for protective earthing)	-	0	-
Cl.15.2 ii) of Cl.15(Provisions for protective earthing)	-	0	-
Cl.15.2 iii) of Cl.15(Provisions for protective earthing)	-	0	-
Cl.15.2 iv) of Cl.15(Provisions for protective earthing)	-	0	-
Cl.15.2 v) of Cl.15(Provisions for protective earthing)	-	0	-
Cl.15.3 of Cl.15(Terminals for external flexible cords and for permanent connection to the mains supply*)	-	0	-
Cl.15.3.1 of Cl.15.3(Adequate terminals for connection of permanent wiring*)	-	0	-
Cl.15.3.2 of Cl.15.3(Reliable connection of non-detachable cords)	-	0	-
Cl.15.3.2 i) of Cl.15.3(Not soldered to conductors of a printed circuit board)	-	0	-
Cl.15.3.2 ii) of Cl.15.3(Adequate clearances and creepage distances between connections should a wire break away)	-	0	-
Cl.15.3.2 iii) of Cl.15.3(Wire secured by additional means to the conductor)	-	0	-
Cl.15.3.3 of Cl.15.3(Screws and nuts clamping conductors have adequate threads: ISO 261, ISO 262 or similar*)	-	0	-
Cl.15.3.4 of Cl.15.3(Conductors adequately fixed (two independent fixings) *)	-	0	-
Cl.15.3.5 of Cl.15.3(Terminals allow connection of conductors having appropriate cross-sectional area)	-	0	-
Cl.15.3.6 of Cl.15.3(Terminals to 15.3.3 have sizes required by table 16)	-	0	-
Cl.15.3.7 of Cl.15.3(Terminals clamp conductors between metal and have adequate pressure)	-	0	-
Cl.15.3.7 i) of Cl.15.3(Terminals designed to avoid conductor slipping out when tightened)	-	0	-
Cl.15.3.7 ii) of Cl.15.3(Terminals adequately fixed when tightened or loosened (no loosening, wiring not stressed, distances not reduced))	-	0	-
Cl.15.3.8 of Cl.15.3(Terminals carrying a current more than)	-	0	-
Cl.15.3.8 i) of Cl.15.3(0.2 A, contact pressure not transmitted by insulating material except ceramic*)	-	0	-
Cl.15.3.9 of Cl.15.3(Termination of non-detachable cords: wires terminated near to each other)	-	0	-
Cl.15.3.9 i) of Cl.15.3(Terminals located and shielded: test with 8 mm strand)	-	0	-
Cl.15.4 of Cl.15(Devices forming a part of the mains plug*)	-	0	-
Cl.15.4.1 of Cl.15.4(No undue strain on mains socket-outlets.)	-	0	-
Cl.15.4.1 i) of Cl.15.4(Device shall be tested on the equipment as per Fig.11: Torque to be applied : 0.25 Nm (Max))	-	0	-
Cl.15.4.2 of Cl.15.4(Device complies with standard for dimensions of mains plugs)	-	0	-
Cl.15.4.3 of Cl.15.4(Device has adequate mechanical strength (tests a,b,c))	-	0	-
Cl.16.1 a) of Cl.16(Mains supply flexible cords shall be sheathed type, complying with IEC 60227 for PVC cords or as per IEC 60245 for synthetic rubber cords)	-	0	-
Cl.16.1 b) of Cl.16(Non-detachable cords for Class I have green/yellow core for protective earth)	-	0	-
Cl.16.2 of Cl.16(Mains cords conductors shall have a nominal cross-sectional area not less than the values given in Table 18, for rated current consumption of the apparatus)	-	0	-
Cl.16.4 of Cl.16(Flexible cords used for connection between equipment have adequate cross-sectional areas to avoid temperature rise under normal and fault conditions)	-	0	-
Cl.16.5 a) of Cl.16(Adequate strain relief on external flexible cords)	-	0	-
Cl.16.5 b) of Cl.16(Not possible to push cord back into equipment)	-	0	-
Cl.16.5 c) of Cl.16(Strain relief device unlikely to damage flexible cord)	-	0	-
Cl.16.5 d) of Cl.16(For mains cords of Class I equipment, hazardous live conductors become taut before earth conductor)	-	0	-
Cl.16.6 of Cl.16(Apertures for external flexible cord: no risk of damage to the cord during assembly or movement in use)	-	0	-
Cl.16.7 a) of Cl.16(Transportable apparatus fitted with detachable cord sets with appliance inlet as perIEC60320-1 or)	-	0	-
Cl.16.7 b) of Cl.16(Transportable apparatus shall have a means of stowage to protect the cord)	-	0	-
17.1 a) of Cl.17(Screws are loosened and then tightened with a torque according to table20)	-	0	-
Cl.17.1 b) of Cl.17(5 times in the case of screws operating in a thread of metal)	-	0	-
Cl.17.1 c) of Cl.17(10 times in the case of screws operating in wood or in a thread in insulating material:)	-	0	-
Cl.17.2 of Cl.17(Correct introduction of screws into female threads in non-metallic material)	-	0	-
Cl.17.3 a) of Cl.17(Screws or other fixing devices intended to fix Covers, legs, stands or the like, shall be captive in order to prevent replacement during servicing by screws or other fixing devices……)	-	0	-
Cl.17.3 b) of Cl.17(Non-captive fixing screws: no hazard when replaced by a screw whose length is 10 times its diameter)	-	0	-
Cl.17.4 of Cl.17(No loosening of conductive parts carrying a current > 0.2 A)	-	0	-
Cl.17.5 of Cl.17(Contact pressure not transmitted through plastic other than ceramic for connections carrying a current > 0.2 A*)	-	0	-
Cl.17.6 of Cl.17(Stranded conductors of flexible supply cords carrying a current > 0.2 A with screw terminals not consolidated by solder *)	-	0	-
Cl.17.7 of Cl.17(Cover fixing devices other than screws have adequate strength and their positioning is unambiguous)	-	0	-
Cl.17.8 of Cl.17(Detachable legs or stands supplied by the manufacturer of the apparatus shall be delivered with the relevant fixing means *)	-	0	-
Cl.17.9 a) of Cl.17(Internal pluggable connections, affecting safety, unlikely to become disconnected)	-	0	-
Cl.17.9 b) of Cl.17(By applying a 2N pull force in any direction to the connection, in case of doubt)	-	0	-
Cl.19.1 of Cl.19(Stability and mechanical hazards)	-	0	-
Cl.19.1 of Cl.19(Stability requirements)	-	0	-
Cl.19.1 i) of Cl.19(Stability requirements)	-	0	-
Cl.19.2 of Cl.19(Test at 10° to the horizontal)	-	0	-
Cl.19.3 of Cl.19(Vertical force test )	-	0	-
Cl.19.4 of Cl.19(Horizontal force test)	-	0	-
Cl.19.5 of Cl.19(Test of edges and corners)	-	0	-
Cl.19.6 of Cl.19(Mechanical strength of glass)	-	0	-
Cl.19.6.1 of Cl.19.6(Requirements)	-	0	-
Cl.19.6.2 of Cl.19.6(Fragmentation test)	-	0	-
Cl.19.7 of Cl.19(Wall or ceiling mounting means)	-	0	-
Cl.19.7.1 of Cl.19..7(Requirements)	-	0	-
Cl.19.7.3 of Cl.19.7(Compliance)	-	0	-
Cl.20.1 of Cl.20(Requirements)	-	0	-
Cl.20.2 of Cl.20(Electrical components and mechanical parts)	-	0	-
Cl.20.2.1 a) of Cl.20.2(Exemption for components contained in an enclosure of material V-0 to IEC60695- 11-10 with openings not exceeding 1 mm in width)	-	0	-
Cl.20.2.1 b) of Cl.20.2(Exemption for small components)	-	0	-
Cl.20.2.2 of Cl.20.2(Electrical components )	-	0	-
Cl.20.2.3 of Cl.20.2(Internal wiring)	-	0	-
Cl.20.2.5 of Cl.20.2(Components and parts not covered by 20.2.2, 20.2.3 and 20.2.4)	-	0	-
Cl.20.2.5 i) of Cl.20.2(Components and parts not covered by 20.2.2, 20.2.3 and 20.2.4)	-	0	-
Cl.20.2.5 ii) of Cl.20.2(Components and parts not covered by 20.2.2, 20.2.3 and 20.2.4)	-	0	-
Cl.20.3 of Cl.20(Fire enclosure*)	-	0	-
Cl.20.3.1 of Cl.20.3(Fire enclosure*)	-	0	-
Cl.20.3.2 of Cl.20.3(Fire enclosure*)	-	0	-
Cl.20.3.3 of Cl.20.3(Fire enclosure*)	-	0	-

-
Included w.e.f. 14-12-2023 Exclusion: Cl.6 (Hazardous radiations), Cl. 6.1 (Ionizing radiation), Cl. 6.2 (Laser Radiation),Cl.7.2 of Cl.7 (Softening temperature of insulating material supporting parts conductively connected to the mains carrying a current> 0.2 A, shall be at least 150ºC), Cl.8.5 ii) of Cl.8 (Resistors bridging basic insulation shall complying with 14.1 a) *), Cl.8.5 iii) of Cl.8 (Capacitors bridging basic insulation shall complying with 14.2.1 a) *), Cl.8.7 of Cl.8 (Components bridging insulation), Cl.8.7 i) of Cl.8 (Basic insulation bridged by components complying with 14.4.5.3), Cl.8.7 ii) of Cl.8 (Components bridging basic, supplementary, double or reinforced insulation complying with 14.2 a) or 14.4), Cl.8.7 iii) of Cl.8 (Basic and supplementary insulation each being bridged by a capacitor or RC-unit complying with 14.3.2 a)), Cl.8.7 iv) of Cl.8 (Double or reinforced insulation being bridged with 2 capacitors or RC-units in series complying with 14.3.2 a)), Cl.8.7 v) of Cl.8 (Double or reinforced insulation being bridged with a single capacitor or RC-unit complying with 14.3.2 b)), Cl.8.16 of Cl.8 (Insulated winding wire without additional interleaved insulation), Cl.8.16/ H 2.2/ H 2.3 , Cl.8.20 of Cl.8 (Bridging components comply with clause 14), 14 (Components), Cl. Cl.15.1.1 i), ii) of Cl.15.1 (Plugs and Sockets*), Cl.16.3 a) of Cl.16 (Flexiblecordsnotcomplyingwith16.1, used for interconnections between separate units of equipment used in combination and carrying hazardous live voltages, have adequate dielectric strength as perCl.10.3), 16.3b (Cord Bending Test), Cl. 18 (Mechanical strength of picture tubes and protection against the effects of implosion), Cl.20.2.4 i) of Cl.20.2 (Printed boards), Annex-L (Additional requirements for electronic flash apparatus for photographic purposes), Cl6.3 (LED)

11373

ARDM Labs Pvt Ltd

8175706

IS 16205 : Part 24 (2017)

Conduit Systems for Cable Management part 24 Particular Requirements Conduit Systems Buried Under Ground

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8 Table 101(Dimensions)	-	500	-
10.4(Bending Test)	-	3000	-
10.2(Compression Test)	-	3000	-
9.1 of IS 16205 (Part 1) : 2017(Construction)	-	500	-
14.0(External Influences)	-	18000	-
15.0(Electromagnetic Compatibility)	-	2000	-
13.1.3(Spread of fire)	-	3000	-
13.1.3.1(Spread of fire)	-	3000	-
10.3(Impact Test)	-	3000	-
7.2(Marking and Documentation)	-	500	-

11 Jan, 2027

-
Up to & Including 315mm

11374

ARDM Labs Pvt Ltd

8175706

IS 7834 : Part 8 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 8 Specific requirements for caps

5000 View breakup
(including test for PVC resin)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.2.2(diameter of the socket of cap)	-	1000	full testing as per 7834 part 1& 8 @ 14000
6.1.1(VCM Content Test)	-	8000	full testing as per 7834 part 1& 8 @ 11000
2.2.2 table 1(Laying length)	-	1500	full testing as per 7834 part 1& 8 @ 11000
2.2.2(diameter of the socket of cap)	-	500	full testing as per 7834 part 1& 8 @ 11000
2.1(General)	-	0	FOR FULL TESTING AS PER IS 7834 PART 1 @RS 10000
2.1(General)	-	0	FOR FULL TESTING AS PER IS 7834 PART 1 @RS 10000
2.2(Manufacture)	-	0	-
2.2(Manufacture)	-	0	-

11 Jan, 2027

-
Up to & Including 630mm

11375

ARDM Labs Pvt Ltd

8175706

IS 7834 : Part 7 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 7 Specific requirements for unions

5000 View breakup
(including test for PVC resin)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.2.3( inside diameter of the socket)	-	1000	full testing as per 7834 part 1&7 @ 11000
2.2.3(Socket length)	-	1000	full testing as per 7834 part 1&7 @ 11000
6.1.1(VCM Content Test)	-	8000	full testing as per 7834 part 1&7 @ 11000
2.2.2, Table 1(Union Laying Length)	-	1000	full testing as per 7834 part 1&7 @ 11000
2.2.3( inside diameter of the socket)	-	1000	full testing as per 7834 part 1&7 @ 11000
2.1(General)	-	0	FOR FULL TESTING AS PER IS 7834 PART 1 @RS 10000
2.2(Manufacture)	-	0	-
2.2.2 table 1(Laying length)	-	0	-
2.2.2, Table 1(Size)	-	0	-
table 1 sl.no: 01(16 )	-	0	-
table 1 sl.no: 02(20 )	-	0	-
table 1 sl.no: 03(25 )	-	0	-
table 1 sl.no: 04(32 )	-	0	-
table 1 sl.no: 06(50 )	-	0	-
table 1 sl.no: 07(63 )	-	0	-
table 1 sl.no: 05(40 )	-	0	-
2.1(General)	-	0	-
2.2(Manufacture)	-	0	-
2.2.2, Table 1(Union Laying Length)	-	0	-
2.2.2, Table 1(Size)	-	0	-
2.2.3(Socket length)	-	0	-

11 Jan, 2027

-
Up to & Including 630mm

11376

ARDM Labs Pvt Ltd

8175706

IS 7834 : Part 6 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 6 Specific requirements for sockets

5000 View breakup
(including test for PVC resin)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.2.3( inside diameter of the socket)	-	1000	full testing as per 7834 part 1&6 @ 11000
2.2.3(Socket length)	-	1000	full testing as per 7834 part 1&6 @ 11000
6.1.1(VCM Content Test)	-	8000	full testing as per 7834 part 1&6 @ 11000
2.2.2, Table 1(Socket Laying Length)	-	1000	full testing as per 7834 part 1&6 @ 11000
2.1(General)	-	0	FOR FULL TESTING AS PER IS 7834 PART 1 @RS 10000
2.1(General)	-	0	-
2.2.3(Socket length)	-	0	-
table 1 sl.no: 01(16 )	-	0	-
table 1 sl.no: 02(20 )	-	0	-
table 1 sl.no: 03(25 )	-	0	-
table 1 sl.no: 04(32 )	-	0	-
table 1 sl.no: 05(40 )	-	0	-
table 1 sl.no: 06(50 )	-	0	-
table 1 sl.no: 07(63 )	-	0	-
table 1 sl.no: 08(75 )	-	0	-
table 1 sl.no: 09(90 )	-	0	-
table 1 sl.no: 10(110 )	-	0	-
table 1 sl.no: 11(125 )	-	0	-
table 1 sl.no: 12(140 )	-	0	-
table 1 sl.no: 13(160 )	-	0	-
table 1 sl.no: 14( 180 )	-	0	-
table 1 sl.no: 15(200 )	-	0	-
table 1 sl.no: 16(225 )	-	0	-
table 1 sl.no: 17(250.0)	-	0	-
table 1 sl.no: 18(280.0)	-	0	-
table 1 sl.no: 19(315.0)	-	0	-
2.2(Manufacture)	-	0	-
2.2.2, Table 1(Size)	-	0	-
2.2.3( inside diameter of the socket)	-	0	-
2.2(Manufacture)	-	0	-
2.2.2, Table 1(Size)	-	0	-
2.2.2 table 1(Laying length)	-	0	-
2.2.2, Table 1(Socket Laying Length)	-	0	-

11 Jan, 2027

-
Up to & Including 630mm

11377

ARDM Labs Pvt Ltd

8175706

IS 7834 : Part 5 (1987)

Injection Moulded PVC Socket Fittings With Solvent Cement Joints for Water Supplies - Part 5 : Specific Requirements for 45 degree Tees

5000 View breakup
(including test for PVC resin)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.2.3( inside diameter of the socket)	-	1000	full testing as per 7834 part 1&5 @ 11000
2.2.3(Socket length)	-	1000	full testing as per 7834 part 1&5 @ 11000
6.1.1(VCM Content Test)	-	8000	full testing as per 7834 part 1&5 @ 11000
2.2.2, Table 1(45 ̊ Tees Laying Length, Z)	-	1000	full testing as per 7834 part 1&5 @ 11000
2.2.2, Table 1(45 ̊ Tees Laying Length, Z1)	-	1000	full testing as per 7834 part 1&5 @ 11000
2.2.3( inside diameter of the socket)	-	1000	full testing as per 7834 part 1&5 @ 11000
2.2.2 table 1(Laying length)	-	1000	full testing as per 7834 part 1&5 @ 11000
2.1(General)	-	0	FOR FULL TESTING AS PER IS 7834 PART 1 @RS 10000
table 1 sl.no: 01(16 (Z) )	-	0	-
table 1 sl.no: 02(20 (Z) )	-	0	-
table 1 sl.no: 03(25 (Z) )	-	0	-
table 1 sl.no: 04(32 (Z) )	-	0	-
table 1 sl.no: 05(40 (Z) )	-	0	-
table 1 sl.no: 06(50 (Z) )	-	0	-
table 1 sl.no: 07(63 (Z) )	-	0	-
table 1 sl.no: 08(75 (Z) )	-	0	-
table 1 sl.no: 09(90 (Z) )	-	0	-
table 1 sl.no: 10(110 (Z) )	-	0	-
table 1 sl.no: 11(125 (Z) )	-	0	-
table 1 sl.no: 12(140 (Z) )	-	0	-
table 1 sl.no: 13(160(z))	-	0	-
table 1 sl.no: 01(16 (Z1) )	-	0	-
table 1 sl.no: 02(20 (Z1) )	-	0	-
table 1 sl.no: 03(25 (Z1) )	-	0	-
table 1 sl.no: 04(32 (Z1) )	-	0	-
table 1 sl.no: 05(40 (Z1) )	-	0	-
table 1 sl.no: 06(50 (Z1) )	-	0	-
table 1 sl.no: 07(63 (Z1) )	-	0	-
table 1 sl.no: 08(75 (Z1) )	-	0	-
table 1 sl.no: 09(90 (Z) )	-	0	-
table 1 sl.no: 10(110 (Z1) )	-	0	-
table 1 sl.no: 11(125 (Z1) )	-	0	-
table 1 sl.no: 12(140 (Z1) )	-	0	-
table 1 sl.no: 13(160(z1))	-	0	-
2.1(General)	-	0	-
2.2(Manufacture)	-	0	-
2.2.2, Table 1(Size)	-	0	-
2.2.3(Socket length)	-	0	-
2.2(Manufacture)	-	0	-
2.2.2, Table 1(Size)	-	0	-
2.2.2, Table 1(45 ̊ Tees Laying Length, Z)	-	0	-
2.2.2, Table 1(45 ̊ Tees Laying Length, Z1)	-	0	-

11 Jan, 2027

-
Up to & Including 630mm

11378

ARDM Labs Pvt Ltd

8175706

IS 7834 : Part 4 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 4 Specific requirements for 90 degree tees

5000 View breakup
(including test for PVC resin)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.2.3( inside diameter of the socket)	-	1000	full testing as per 7834 part 1&4 @ 11000
2.2.3(Socket length)	-	1000	full testing as per 7834 part 1&4 @ 11000
6.1.1(VCM Content Test)	-	8000	full testing as per 7834 part 1&4 @ 11000
2.2.2, Table 1(90 ̊ Elbow Laying Length)	-	1500	full testing as per 7834 part 1&4 @ 11000
2.2.2, Table 1(Size)	-	500	full testing as per 7834 part 1&4 @ 11000
2.1(General)	-	0	FOR FULL TESTING AS PER IS 7834 PART 1 @RS 10000
table 1 sl.no: 01(16 )	-	0	-
table 1 sl.no: 02(20 )	-	0	-
table 1 sl.no: 03(25 )	-	0	-
table 1 sl.no: 04(32 )	-	0	-
table 1 sl.no: 05(40 )	-	0	-
table 1 sl.no: 06(50 )	-	0	-
table 1 sl.no: 07(63 )	-	0	-
table 1 sl.no: 08(75 )	-	0	-
table 1 sl.no: 09(90 )	-	0	-
table 1 sl.no: 10(110 )	-	0	-
table 1 sl.no: 11(125 )	-	0	-
table 1 sl.no: 12(140 )	-	0	-
table 1 sl.no: 13(160 )	-	0	-
table 1 sl.no: 14( 180 )	-	0	-
table 1 sl.no: 15(200 )	-	0	-
table 1 sl.no: 16(225 )	-	0	-
table 1 sl.no: 17(250.0)	-	0	-
table 1 sl.no: 18(280.0)	-	0	-
table 1 sl.no: 19(315.0)	-	0	-
2.1(General)	-	0	-
2.2(Manufacture)	-	0	-
2.2(Manufacture)	-	0	-
2.2.2, Table 1(Size)	-	0	-
2.2.2, Table 1(90 ̊ Elbow Laying Length)	-	0	-
2.2.3( inside diameter of the socket)	-	0	-
2.2.3(Socket length)	-	0	-
2.2.2 table 1(Laying length)	-	0	-

11 Jan, 2027

-
Up to & Including 630mm

11379

ARDM Labs Pvt Ltd

8175706

IS 7834 : Part 3 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 3 Specific requirements for 90 degree elbows

5000 View breakup
(including test for PVC resin)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
cl 2.2.2(Dimensions)	-	1000	full testing as per 7834 part 1&3 @ 11000
Cl. 2.1 (Ref. Cl. 6.3 of IS 7834 (part 1) : 1987(Effect on water - Lead (first extraction) - Appendix C )	-	1500	full testing as per 7834 part 1&3 @ 11000
Cl. 2.1 (Ref. Cl. 6.3 of IS 7834 (part 1) : 1987(Effect on water - Lead (third extraction) - Appendix C)	-	1500	full testing as per 7834 part 1&3 @ 11000
Cl. 2.1 (Ref. Cl. 6.3 of IS 7834 (part 1) : 1987(Effect on water - Dialkyl tin C4 and higher homologues measured as tin (third extraction) - Appendix C)	-	1500	full testing as per 7834 part 1&3 @ 11000
Cl. 2.1 (Ref. Cl. 6.3 of IS 7834 (part 1) : 1987(Effect on water - Other toxic substances (third extraction) - Appendix C)	-	1500	full testing as per 7834 part 1&3 @ 11000
6.1.1(VCM Content Test)	-	8000	full testing as per 7834 part 1&3 @ 11000
2.2.2 table 1(Laying length)	-	1500	full testing as per 7834 part 1&3 @ 11000

11 Jan, 2027

-
Up to & Including 630mm

11380

ARDM Labs Pvt Ltd

8175706

IS 7834 : Part 2 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 2 Specific requirements for 45 degrees elbows

5000 View breakup
(including test for PVC resin)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.2.3( inside diameter of the socket)	-	1000	full testing as per 7834 part 1&2 @ 11000
2.2.3(socket length)	-	1000	full testing as per 7834 part 1&2 @ 11000
2.2.2, Table 1(Size)	-	1000	full testing as per 7834 part 1&2 @ 11000
2.2.2, Table 1(45 ̊ Elbow Laying Length)	-	1500	full testing as per 7834 part 1&2 @ 11000
2.2.3(socket length)	-	1500	full testing as per 7834 part 1&2 @ 11000
6.4 PART-1(Short term hydraulic test)	-	5000	full testing as per 7834 part 1&2 @ 11000
6.1.1(VCM Content Test)	-	8000	full testing as per 7834 part 1&2 @ 11000
2.1(General)	-	0	FOR FULL TESTING AS PER IS 7834 PART 1 @RS 10000
2.1(General)	-	0	-
2.2(Manufacture)	-	0	-
2.2.2 table 1(Laying Length)	-	0	-
table 1 sl.no: 01(16 )	-	0	-
table 1 sl.no: 02(20 )	-	0	-
table 1 sl.no: 03(25 )	-	0	-
table 1 sl.no: 04(32 )	-	0	-
table 1 sl.no: 05(40 )	-	0	-
table 1 sl.no: 06(50 )	-	0	-
table 1 sl.no: 07(63 )	-	0	-
table 1 sl.no: 08(75 )	-	0	-
table 1 sl.no: 09(90 )	-	0	-
table 1 sl.no: 10(110 )	-	0	-
table 1 sl.no: 11(125 )	-	0	-
table 1 sl.no: 12(140 )	-	0	-
table 1 sl.no: 13(160 )	-	0	-
table 1 sl.no: 14( 180 )	-	0	-
table 1 sl.no: 15(200 )	-	0	-
table 1 sl.no: 16(225 )	-	0	-
table 1 sl.no: 17(250.0)	-	0	-
table 1 sl.no: 18(280.0)	-	0	-
table 1 sl.no: 19(315.0)	-	0	-
2.2(Manufacture)	-	0	-
2.2.2, Table 1(Size)	-	0	-
2.2.2, Table 1(45 ̊ Elbow Laying Length)	-	0	-
2.2.3( inside diameter of the socket)	-	0	-

11 Jan, 2027

-
Up to & Including 630mm

11381

ARDM Labs Pvt Ltd

8175706

IS 16098 Part 2 (2013)

Structured-Wall Plastics Piping Systems for Non-Pressure Drainage and Sewerage Part 2 Pipes and Fittings with Non-Smooth External Surface, Type B

SN 2, SN 4,SN 8 ,SN 16

104000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1.1(Color of Finished Pipes)	-	250	10% DISCOUNT FOR BIS
6.3.3(Out Side Diameter)	-	250	10% DISCOUNT FOR BIS
9 Table 12 (ii)(Water tightness)	-	1100	10% DISCOUNT FOR BIS
7.1(Appearance)	-	250	10% DISCOUNT FOR BIS
Table -1 Cl. No. 5.1, iii)(Thermal Stability (Oxidation Induction Test, OIT) at 200ºC)	-	2200	10% DISCOUNT FOR BIS
" 5.1 Table-2 ", i)(Resistance to Internal Pressure 165hrs)	-	5000	10% DISCOUNT FOR BIS
" 5.1 Table-2 ", ii)(Resistance to Internal Pressure 1000hrs)	-	11000	10% DISCOUNT FOR BIS
6.3.2(Length of Pipe)	-	250	10% DISCOUNT FOR BIS
7.2 Table-6 (i)(Resistance to Heating oven test at (110±2ºC for 30 minute))	-	1000	10% DISCOUNT FOR BIS
9 Table- 12 (iii)(Resistance to combined temperature cycling and external loading)	-	35000	10% DISCOUNT FOR BIS
8.1.1 Table-10 (iv)(Creep ratio)	-	1200	10% DISCOUNT FOR BIS
6.3.5.1.1(Ring Stiffness of Spigot + socket)	-	1100	10% DISCOUNT FOR BIS
Table -1 Cl. No. 5.1, i)(Base Density)	-	850	10% DISCOUNT FOR BIS
Table -1 Cl. No. 5.1, ii)(Melt Flow Rate (MFR) at (190ºC, 5kg load))	-	1000	10% DISCOUNT FOR BIS
6.3.5.2(Wall Thickness(e4 min))	-	500	10% DISCOUNT FOR BIS
9 Table-12 (i)(Tightness of elastomeric ring seal Joint)	-	1100	10% DISCOUNT FOR BIS
8.1.1, 8.1.2 Table-10 (iii)(Ring flexibility 30% of dem)	-	1100	10% DISCOUNT FOR BIS
8.1.1 Table-10 (i)(Ring Stiffness)	-	1100	10% DISCOUNT FOR BIS
8.1.1 Table-10 (ii)(Impact Strength at (0±1 ºC))	-	1100	10% DISCOUNT FOR BIS
6.3.1 & Table-5(Dim (min.) E4 (min) E5 (min.) Socket Length)	-	500	10% DISCOUNT FOR BIS
"6.3.5.1.5 Table-5 "(Socket thickness Avg. (min.) Avg.)	-	250	10% DISCOUNT FOR BIS
6.3.5.2("Construction Height of body wall(ec) Wall Thickness (emin) ")	-	250	10% DISCOUNT FOR BIS
7.1.1(Color of Finished Pipes)	-	0	-
6.3.3(Out Side Diameter)	-	0	-
9 Table 12 (ii)(Water tightness)	-	0	-
7.1(Appearance)	-	0	-
Table -1 Cl. No. 5.1, iii)(Thermal Stability (Oxidation Induction Test, OIT) at 200ºC)	-	0	-
" 5.1 Table-2 ", i)(Resistance to Internal Pressure 165hrs)	-	0	-
" 5.1 Table-2 ", ii)(Resistance to Internal Pressure 1000hrs)	-	0	-
6.3.2(Length of Pipe)	-	0	-
7.2 Table-6 (i)(Resistance to Heating oven test at (110±2ºC for 30 minute))	-	0	-
9 Table- 12 (iii)(Resistance to combined temperature cycling and external loading)	-	0	-
8.1.1 Table-10 (iv)(Creep ratio)	-	0	-
6.3.5.1.1(Ring Stiffness of Spigot + socket)	-	0	-
Table -1 Cl. No. 5.1, i)(Base Density)	-	0	-
Table -1 Cl. No. 5.1, ii)(Melt Flow Rate (MFR) at (190ºC, 5kg load))	-	0	-
6.3.5.2(Wall Thickness(e4 min))	-	0	-
9 Table-12 (i)(Tightness of elastomeric ring seal Joint)	-	0	-
8.1.1, 8.1.2 Table-10 (iii)(Ring flexibility 30% of dem)	-	0	-
8.1.1 Table-10 (i)(Ring Stiffness)	-	0	-
8.1.1 Table-10 (ii)(Impact Strength at (0±1 ºC))	-	0	-
6.3.1 & Table-5(Dim (min.) E4 (min) E5 (min.) Socket Length)	-	0	-
"6.3.5.1.5 Table-5 "(Socket thickness Avg. (min.) Avg.)	-	0	-
6.3.5.2("Construction Height of body wall(ec) Wall Thickness (emin) ")	-	0	-
7.1.1(Color of Finished Pipes)	-	0	-
6.3.3(Out Side Diameter)	-	0	-
9 Table 12 (ii)(Water tightness)	-	0	-
7.1(Appearance)	-	0	-
Table -1 Cl. No. 5.1, iii)(Thermal Stability (Oxidation Induction Test, OIT) at 200ºC)	-	0	-
" 5.1 Table-2 ", i)(Resistance to Internal Pressure 165hrs)	-	0	-
" 5.1 Table-2 ", ii)(Resistance to Internal Pressure 1000hrs)	-	0	-
6.3.2(Length of Pipe)	-	0	-
7.2 Table-6 (i)(Resistance to Heating oven test at (110±2ºC for 30 minute))	-	0	-
9 Table- 12 (iii)(Resistance to combined temperature cycling and external loading)	-	0	-
8.1.1 Table-10 (iv)(Creep ratio)	-	0	-
6.3.5.1.1(Ring Stiffness of Spigot + socket)	-	0	-
Table -1 Cl. No. 5.1, i)(Base Density)	-	0	-
Table -1 Cl. No. 5.1, ii)(Melt Flow Rate (MFR) at (190ºC, 5kg load))	-	0	-
6.3.5.2(Wall Thickness(e4 min))	-	0	-
9 Table-12 (i)(Tightness of elastomeric ring seal Joint)	-	0	-
8.1.1, 8.1.2 Table-10 (iii)(Ring flexibility 30% of dem)	-	0	-
8.1.1 Table-10 (i)(Ring Stiffness)	-	0	-
8.1.1 Table-10 (ii)(Impact Strength at (0±1 ºC))	-	0	-
6.3.1 & Table-5(Dim (min.) E4 (min) E5 (min.) Socket Length)	-	0	-
"6.3.5.1.5 Table-5 "(Socket thickness Avg. (min.) Avg.)	-	0	-
6.3.5.2("Construction Height of body wall(ec) Wall Thickness (emin) ")	-	0	-

11 Jan, 2027

-
Included w.e.f. 28.06.2024

11382

ABSOLUTE TESTING SERVICES, FARIDABAD

8174526

IS 16333 : Part 3 (2022)

Mobile phone handsets: Part 3 Indian language support for mobile phone handsets - Specific requirements(Second Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Inputting of text)	-	1000	-
5.2(Message Readability)	-	1000	-
6(Marking)	-	1000	-

13 Nov, 2026

-
-

11383

ARDM Labs Pvt Ltd

8175706

IS 16098 Part 1 (2013)

Structured-Wall Plastics Piping Systems for Non-Pressure Drainage and Sewerage Part 1 Pipes and Fittings With Smooth External Surface, Type A

DN ≤ 500: SN 4, SN 8 or SN 16 DN > 500: SN 2, SN 4, SN

101000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.3.1(Dimension of Pipes and Fittings Diameter of pipe)	-	250	10% DISCOUNT FOR BIS
6.3.1 Table 2(Mean outside diameter)	-	250	10% DISCOUNT FOR BIS
6.3.2 Table 3(Wall thickness)	-	500	-
6.3.3 Fig 2(Length of pipe)	-	250	-
6.3.4,Table 4,5(Dimensions of Integral sckets and spigot ends)	-	500	-
7.1(Appearance)	-	250	-
7.2(Colour )	-	250	-
7.3(Vicat softening temperature of pipes)	-	1000	-
7.4(Resistance to Dichloromethane)	-	1500	-
7.5(longitudinal reversion)	-	800	-
9.1(Ring stiffness)	-	1100	-
9.3(Ring flexibility)	-	1100	-
9.4(Creep ratio)	-	1100	-
8.3(Effect of Heating (Stress Relief Test))	-	1000	-
5.0(Composition of the material)	-	5300	-
8.0(Physical characteristics of fittings)	-	0	-
9 (Table 12)(Performance Requirements)	-	0	-
9 (Table 12)(Performance Requirements)	-	0	-
12.0(PERFORMANCE REQUIREMENTS)	-	0	-
10.1(Impact Strength of Injection Moulded and Fabricated Fittings)	-	250	-
11.1(Elastomeric Sealing Rings)	-	250	-
5.1(Composition of the material)	-	5300	-
5.2 Table 1(Composition of the material- Resistance to internal hydrostatic Pipe material (1) 1 000 IS 12235 No seepage, cracking, pressure at 60ºC)	-	5300	-
12.1.3(Resistance to Combined Temperature Cycling and External Loading)	-	35000	-
5.3(Composition of the material)	-	5300	-
8.1(Appearance and colour)	-	500	-
8.2(Vicat softening temperature of fittings)	-	1000	-
9.2(Resistance to external blows at o C)	-	1500	-
11.0(Joints)	-	250	-
12.1.1(Tightness of Elastomeric Sealing Ring Joints (Water pressure))	-	250	-
12.1.2(Tightness of Elastomeric Sealing Ring Joints (Internal Vaccum ))	-	250	-
12.2.1(Tightness of Solvent cemented Ring Joints )	-	250	-
12.2.2(Tightness of Solvent cemented Ring Joints (Vaccum pressure))	-	250	-
6.3.2(Dimension of Pipes and Fittings Lengths of Pipe)	-	250	-
5.4(Composition of the material)	-	5300	-
9.0(Mechanical characteristics ofpipes)	-	0	-
11.2(Solvent cement)	-	250	-
12.1(Elastomeric Sealing Ring Joints)	-	250	-
12.2(Solvent cement joints)	-	250	-
6.3.3(Dimension of Pipes and Fittings Diameters of Pipes and Spigots of Pipes orFittings)	-	250	-
7.0(Physical characteristics for pipes and fittings Appearance)	-	0	-
7.1.1(Physical characteristics for pipes and fittings Colour of Finished Pipes)	-	0	-
7.2(Physical characteristics for pipes and fittings )	-	0	-
7.3(Physical characteristics for pipes and fittings )	-	0	-
8.1.1(Mechanical Characteristics of Pipes General)	-	0	-
8.1.1(Mechanical Characteristics of Pipes General)	-	0	-
8.1.2 (a)(Mechanical Characteristics of Pipes Ring Flexibility)	-	0	-
8.1.2 (b)(Mechanical Characteristics of Pipes Ring Flexibility)	-	0	-
8.1.2 (c)(Mechanical Characteristics of Pipes Ring Flexibility)	-	0	-
8.1.2 (d)(Mechanical Characteristics of Pipes Ring Flexibility)	-	0	-
8.1.2 (e)(Mechanical Characteristics of Pipes Ring Flexibility)	-	0	-
8.2.1(Mechanical Characteristics of Fittings General)	-	0	-
8.2.1(Mechanical Characteristics of Fittings General)	-	0	-
8.2.2(Mechanical Characteristics of Fittings)	-	0	-
8.3(Joints)	-	0	-
9 (Table 12)(Performance Requirements)	-	0	-
11.1(Marking General)	-	0	-
11.2.1(Minimum Required Marking Pipes)	-	0	-
11.2.1(Minimum Required Marking Pipes)	-	0	-
11.2.1(Minimum Required Marking Pipes)	-	0	-
11.2.1(Minimum Required Marking Pipes)	-	0	-
11.2.1(Minimum Required Marking Pipes)	-	0	-
11.2.2(Minimum Required Marking Fittings)	-	0	-
11.2.2(Minimum Required Marking Fittings)	-	0	-
11.2.2(Minimum Required Marking Fittings)	-	0	-
11.2.2(Minimum Required Marking Fittings)	-	0	-
11.2.2(Minimum Required Marking Fittings)	-	0	-
11.2.2(Minimum Required Marking Fittings)	-	0	-
6.0(DESIGNATION OF WALL CONSTRUCTIONS AND EXAMPLES OF TYPICAL JOINTING METHODS )	-	0	-
6.1(Wall Construction Designated as Type A)	-	0	-
6.2(Deswignation)	-	250	-
6.3(Dimensions of pipes and fittings)	-	250	-
6.3.4.1(Wall thickness of sockets)	-	250	-
6.3.4.2(Fabricated fittings)	-	250	-
6.3.4.3(Rotational moulded fittings)	-	250	-
6.3.4.4(Type of fittings)	-	250	-
7.0(Physical characteristics of pipes)	-	250	-
10.0(Mechanical Characteristics of fittings)	-	250	-
6.3.1(Dimension of Pipes and Fittings Diameter of pipe)	-	0	-
6.3.2(Dimension of Pipes and Fittings Lengths of Pipe)	-	250	-
6.3.3(Dimension of Pipes and Fittings Diameters of Pipes and Spigots of Pipes orFittings)	-	0	-
7.0(Physical characteristics for pipes and fittings Appearance)	-	0	-
7.1.1(Physical characteristics for pipes and fittings Colour of Finished Pipes)	-	0	-
7.2(Physical characteristics for pipes and fittings )	-	0	-
7.3(Physical characteristics for pipes and fittings )	-	0	-
8.1.1(Mechanical Characteristics of Pipes General)	-	0	-
8.1.1(Mechanical Characteristics of Pipes General)	-	0	-
8.1.2 (a)(Mechanical Characteristics of Pipes Ring Flexibility)	-	0	-
8.1.2 (b)(Mechanical Characteristics of Pipes Ring Flexibility)	-	0	-
8.1.2 (c)(Mechanical Characteristics of Pipes Ring Flexibility)	-	0	-
8.1.2 (d)(Mechanical Characteristics of Pipes Ring Flexibility)	-	0	-
8.1.2 (e)(Mechanical Characteristics of Pipes Ring Flexibility)	-	0	-
8.2.1(Mechanical Characteristics of Fittings General)	-	0	-
8.2.1(Mechanical Characteristics of Fittings General)	-	0	-
8.2.2(Mechanical Characteristics of Fittings)	-	0	-
8.3(Joints)	-	0	-
9 (Table 12)(Performance Requirements)	-	0	-
9 (Table 12)(Performance Requirements)	-	0	-
9 (Table 12)(Performance Requirements)	-	0	-
11.1(Marking General)	-	0	-
11.2.1(Minimum Required Marking Pipes)	-	0	-
11.2.1(Minimum Required Marking Pipes)	-	0	-
11.2.1(Minimum Required Marking Pipes)	-	0	-
11.2.1(Minimum Required Marking Pipes)	-	0	-
11.2.1(Minimum Required Marking Pipes)	-	0	-
11.2.2(Minimum Required Marking Fittings)	-	0	-
11.2.2(Minimum Required Marking Fittings)	-	0	-
11.2.2(Minimum Required Marking Fittings)	-	0	-
11.2.2(Minimum Required Marking Fittings)	-	0	-
11.2.2(Minimum Required Marking Fittings)	-	0	-
11.2.2(Minimum Required Marking Fittings)	-	0	-
6.3.4 Table 4 & 5(Dimensions of Integral Socket and spigot ends)	-	0	-
6.3.4 Table 4 & 5(Outside diameter (dsm) min)	-	0	-
6.3.4 Table 4 & 5(C max)	-	250	-
12.1.1(Tightness of Elastomeric Sealing Ring Joints (Water Pressure))	-	250	-
7.1.1(Colour of finished pipes)	-	0	-
12.1.2(Tightness of Elastomeric Sealing Ring Joints (Internal Vacuum))	-	0	-
12.1.3(Resistance to Combined Temperature Cycling and External Loading)	-	35000	-
12.1.3(Resistance to Combined Temperature Cycling and External Loading)	-	0	-
12.1.3(Resistance to Combined Temperature Cycling and External Loading)	-	0	-
12.1.3(Resistance to Combined Temperature Cycling and External Loading)	-	0	-
12.1.3(Resistance to Combined Temperature Cycling and External Loading)	-	0	-
6.3.1 Table 2(Mean outside diameter)	-	0	-
6.3.2 Table 3(Wall thickness)	-	0	-
6.3.3 Fig 2(Length of pipe)	-	0	-
6.3.4,Table 4,5(Dimensions of Integral sckets and spigot ends)	-	0	-
7.1(Appearance)	-	0	-
7.2(Colour )	-	0	-
7.3(Vicat softening temperature of pipes)	-	0	-
7.4(Resistance to Dichloromethane)	-	0	-
7.5(longitudinal reversion)	-	0	-
9.1(Ring stiffness)	-	0	-
9.3(Ring flexibility)	-	0	-
9.4(Creep ratio)	-	0	-
8.3(Effect of Heating (Stress Relief Test))	-	0	-
5.0(Composition of the material)	-	0	-
8.0(Physical characteristics of fittings)	-	0	-
9 (Table 12)(Performance Requirements)	-	0	-
9 (Table 12)(Performance Requirements)	-	0	-
12.0(PERFORMANCE REQUIREMENTS)	-	0	-
10.1(Impact Strength of Injection Moulded and Fabricated Fittings)	-	0	-
11.1(Elastomeric Sealing Rings)	-	0	-
5.1(Composition of the material)	-	0	-
12.1.3(Resistance to Combined Temperature Cycling and External Loading)	-	0	-
5.2 Table 1(Composition of the material- Resistance to internal hydrostatic Pipe material (1) 1 000 IS 12235 No seepage, cracking, pressure at 60ºC)	-	0	-
5.3(Composition of the material)	-	0	-
8.1(Appearance and colour)	-	0	-
8.2(Vicat softening temperature of fittings)	-	0	-
9.2(Resistance to external blows at o C)	-	0	-
11.0(Joints)	-	0	-
12.1.1(Tightness of Elastomeric Sealing Ring Joints (Water pressure))	-	0	-
12.1.2(Tightness of Elastomeric Sealing Ring Joints (Internal Vaccum ))	-	0	-
12.2.1(Tightness of Solvent cemented Ring Joints )	-	0	-
12.2.2(Tightness of Solvent cemented Ring Joints (Vaccum pressure))	-	0	-
6.3.1(Dimension of Pipes and Fittings Diameter of pipe)	-	0	-
6.3.2(Dimension of Pipes and Fittings Lengths of Pipe)	-	0	-
5.4(Composition of the material)	-	0	-
9.0(Mechanical characteristics ofpipes)	-	0	-
12.1(Elastomeric Sealing Ring Joints)	-	0	-
12.2(Solvent cement joints)	-	0	-
6.3.3(Dimension of Pipes and Fittings Diameters of Pipes and Spigots of Pipes orFittings)	-	0	-
7.0(Physical characteristics for pipes and fittings Appearance)	-	0	-
7.1.1(Physical characteristics for pipes and fittings Colour of Finished Pipes)	-	0	-
7.2(Physical characteristics for pipes and fittings )	-	0	-
7.3(Physical characteristics for pipes and fittings )	-	0	-
8.1.1(Mechanical Characteristics of Pipes General)	-	0	-
8.1.1(Mechanical Characteristics of Pipes General)	-	0	-
8.1.2 (a)(Mechanical Characteristics of Pipes Ring Flexibility)	-	0	-
8.1.2 (b)(Mechanical Characteristics of Pipes Ring Flexibility)	-	0	-
8.1.2 (c)(Mechanical Characteristics of Pipes Ring Flexibility)	-	0	-
8.1.2 (d)(Mechanical Characteristics of Pipes Ring Flexibility)	-	0	-
8.1.2 (e)(Mechanical Characteristics of Pipes Ring Flexibility)	-	0	-
8.2.1(Mechanical Characteristics of Fittings General)	-	0	-
8.2.1(Mechanical Characteristics of Fittings General)	-	0	-
8.2.2(Mechanical Characteristics of Fittings)	-	0	-
8.3(Joints)	-	0	-
9 (Table 12)(Performance Requirements)	-	0	-
11.1(Marking General)	-	0	-
11.2.1(Minimum Required Marking Pipes)	-	0	-
11.2.1(Minimum Required Marking Pipes)	-	0	-
11.2.1(Minimum Required Marking Pipes)	-	0	-
11.2.1(Minimum Required Marking Pipes)	-	0	-
11.2.1(Minimum Required Marking Pipes)	-	0	-
11.2.2(Minimum Required Marking Fittings)	-	0	-
11.2.2(Minimum Required Marking Fittings)	-	0	-
11.2.2(Minimum Required Marking Fittings)	-	0	-
11.2.2(Minimum Required Marking Fittings)	-	0	-
11.2.2(Minimum Required Marking Fittings)	-	0	-
11.2.2(Minimum Required Marking Fittings)	-	0	-
6.0(DESIGNATION OF WALL CONSTRUCTIONS AND EXAMPLES OF TYPICAL JOINTING METHODS )	-	0	-
6.1(Wall Construction Designated as Type A)	-	250	-
6.2(Deswignation)	-	0	-
6.3(Dimensions of pipes and fittings)	-	250	-
6.3.4.1(Wall thickness of sockets)	-	0	-
6.3.4.2(Fabricated fittings)	-	0	-
6.3.4.3(Rotational moulded fittings)	-	0	-
6.3.4.4(Type of fittings)	-	0	-
7.0(Physical characteristics of pipes)	-	0	-
10.0(Mechanical Characteristics of fittings)	-	0	-
6.3.1(Dimension of Pipes and Fittings Diameter of pipe)	-	0	-
6.3.2(Dimension of Pipes and Fittings Lengths of Pipe)	-	0	-
6.3.3(Dimension of Pipes and Fittings Diameters of Pipes and Spigots of Pipes orFittings)	-	0	-
7.0(Physical characteristics for pipes and fittings Appearance)	-	0	-
7.1.1(Physical characteristics for pipes and fittings Colour of Finished Pipes)	-	0	-
7.2(Physical characteristics for pipes and fittings )	-	0	-
7.3(Physical characteristics for pipes and fittings )	-	0	-
8.1.1(Mechanical Characteristics of Pipes General)	-	0	-
8.1.1(Mechanical Characteristics of Pipes General)	-	0	-
8.1.2 (a)(Mechanical Characteristics of Pipes Ring Flexibility)	-	0	-
9 (Table 12)(Performance Requirements)	-	0	-
9 (Table 12)(Performance Requirements)	-	0	-
9 (Table 12)(Performance Requirements)	-	0	-
11.1(Marking General)	-	0	-
11.2.1(Minimum Required Marking Pipes)	-	0	-
11.2.1(Minimum Required Marking Pipes)	-	0	-
11.2.1(Minimum Required Marking Pipes)	-	0	-
11.2.1(Minimum Required Marking Pipes)	-	0	-
11.2.1(Minimum Required Marking Pipes)	-	0	-
11.2.2(Minimum Required Marking Fittings)	-	0	-
11.2.2(Minimum Required Marking Fittings)	-	0	-
11.2.2(Minimum Required Marking Fittings)	-	0	-
11.2.2(Minimum Required Marking Fittings)	-	0	-
11.2.2(Minimum Required Marking Fittings)	-	0	-
11.2.2(Minimum Required Marking Fittings)	-	0	-
6.3.4 Table 4 & 5(Dimensions of Integral Socket and spigot ends)	-	0	-
6.3.4 Table 4 & 5(Outside diameter (dsm) min)	-	0	-
6.3.4 Table 4 & 5(C max)	-	0	-
12.1.1(Tightness of Elastomeric Sealing Ring Joints (Water Pressure))	-	0	-
7.1.1(Colour of finished pipes)	-	0	-
12.1.2(Tightness of Elastomeric Sealing Ring Joints (Internal Vacuum))	-	0	-
12.1.3(Resistance to Combined Temperature Cycling and External Loading)	-	0	-
12.1.3(Resistance to Combined Temperature Cycling and External Loading)	-	0	-
12.1.3(Resistance to Combined Temperature Cycling and External Loading)	-	0	-
12.1.3(Resistance to Combined Temperature Cycling and External Loading)	-	0	-
12.1.3(Resistance to Combined Temperature Cycling and External Loading)	-	0	-
11.2(Solvent cement)	-	0	-

11 Jan, 2027

-
Included w.e.f. 28.06.2024

11384

ARDM Labs Pvt Ltd

8175706

IS 10124 : Part 13 (2009)

Fabricated PVC-U Fittings for Potable Water Supplies - Specification Part 13 Specific Requirements for 11Â¼oBends PART 12 SPECIFIC REQUIREMENTS FOR 22 Â½o BENDS

14000 View breakup
(including test for PVC resin)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2.2, Table 1(Dimension of 11 1/4° bends)	-	500	Full Testing Chargers refer to IS 10124 (P-1)
3.2.2, Table 2(Dimension of 11 1/4° bends for Elastomeric sealing ring joint)	-	500	Full Testing Chargers refer to IS 10124 (P-1)
3.2.3(Socket, Measurement)	-	500	Full Testing Chargers refer to IS 10124 (P-1)
3.1(General)	-	12000	Full Testing Chargers refer to IS 10124 (P-1)

11 Jan, 2027

-
Up to & Including 630mm

11385

ABSOLUTE TESTING SERVICES, FARIDABAD

8174526

IS 16047 : Part 3 (2018)

Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes ” Secondary Lithium Cells and Batteries for Portable Applications Part 3 Prismatic and Cylindrical Lithium Secondary Cells, and Batteries Made From Them ( First Revision )

100000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Cell Designation and Marking)	-	5000	-
7.1, 7.2(Charging Procedure for Test Purpose)	-	5000	-
7.3.1(Discharge Performance at 20°C (Rated Capacity))	-	5000	-
7.3.2("Discharge Performance at -20°C ")	-	5000	-
7.3.3(High Rate Discharge Performance at 20°C)	-	5000	-
7.4(Charge (capacity) Retention and Recovery)	-	5000	-
7.5(Charge (Capacity) Recovery After Long Term Storage)	-	5000	-
7.6.2(Endurance In Cycles at a Rate of 0.2It A)	-	5000	-
7.6.3("Endurance in Cycles at a Rate of 0.5It A (Accelerated Test Procedure) ")	-	5000	-
7.7(Battery Internal Resistance)	-	5000	-
7.8(Electrostatic Discharge (ESD))	-	5000	-

13 Nov, 2026

-
-

11386

ARDM Labs Pvt Ltd

8175706

IS 10124 : Part 12 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 12 specific requirements for 22½ degree bends (Second Revision)

14000 View breakup
(including test for PVC resin)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2.2, Table 1(Dimensions of 22 ½ deg Bends)	-	1000	Full Testing Charges refer to IS 10124 (P-1)
3.2.2, Table 2(Dimensions of 22 ½ deg Bend for Elastomeric Sealing Ring Joint)	-	500	Full Testing Charges refer to IS 10124 (P-1)
3.2.3(Socket, measurements)	-	500	Full Testing Charges refer to IS 10124 (P-1)
3.1(General)	-	12000	-

11 Jan, 2027

-
Up to & Including 630mm

11387

ARDM Labs Pvt Ltd

8175706

IS 10124 : Part 11 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 11 specific requirements for 40 degree bends (Second Revision)

14000 View breakup
(including test for PVC resin)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2.2, Table 1(Dimensions of 30 deg Bends)	-	1000	Full Testing Charges refer to IS 10124 (P-1)
3.2.2, Table 2(Dimensions of 30 deg Bend for Elastomeric Sealing Ring Joint)	-	500	Full Testing Charges refer to IS 10124 (P-1)
3.1(General)	-	12000	-

11 Jan, 2027

-
Up to & Including 630mm

11388

ARDM Labs Pvt Ltd

8175706

IS 10124 : Part 10 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 10 specific requirements for 45 degree bends (Second Revision)

14000 View breakup
-(including test for PVC resin)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2.2, Fig 1, table 1(Dimensions)	-	1000	Full Testing Charges refer to IS 10124 (P-1)
Table 2 (Clause 3.2.2, and Fig. 2)(Dimensions of 45° Bend for Elastomeric Sealing Ring Joint)	-	1000	Full Testing Charges refer to IS 10124 (P-1)
Table 1 (Clause 3.2.2, and Fig. 1)(Dimensions of 45o Bend)	-	1000	Full Testing Charges refer to IS 10124 (P-1)
3.1(General)	-	12000	Full Testing Charges refer to IS 10124 (P-1)
3.2, 3.2.1, Fig 2(Manufacture)	-	500	-
3.2.3(the socket measurement shall comply with IS 10124 (Part 1).)	-	500	-

11 Jan, 2027

-
Up to & Including 630mm

11389

ARDM Labs Pvt Ltd

8175706

IS 10124 : Part 9 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 9 specific requirements for 60 degree bends (Second Revision)

14000 View breakup
(including test for PVC resin)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2.2, Fig 1, table 1(Dimensions)	-	1000	Full Testing Charges refer to IS 10124 (P-1)
Table 2 (Clause 3.2.2, and Fig. 2)(Dimensions of 60o Bend for Elastomeric Sealing Ring Joint)	-	1000	Full Testing Charges refer to IS 10124 (P-1)
Table 1 (Clauses 3.2.2, 3.2.3, and Fig. 1)(Dimensions of 60o Bends)	-	1000	Full Testing Charges refer to IS 10124 (P-1)
3.1(General)	-	12000	Full Testing Charges refer to IS 10124 (P-1)
3.2, 3.2.1, Fig 2(Manufacture)	-	500	-
3.2.3(the socket measurement shall comply with IS 10124 (Part 1).)	-	500	-

11 Jan, 2027

-
Up to & Including 630mm

11390

ARDM Labs Pvt Ltd

8175706

IS 10124 : Part 8 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 8 specific requirements for 90 degree bends (Second Revision)

14000 View breakup
(including test for PVC resin)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2.2, Fig 2, table 2(Dimensions)	-	1500	Full Testing charge refer to IS 10124 (P-1)@14000
Table 2 (Clause 3.2.2, and Fig. 2)(Dimensions of 90o Bend for Elastomeric Sealing Ring Joint)	-	1500	Full Testing charge refer to IS 10124 (P-1)@14000
Table 1 (Clause 3.2.2, and Fig. 1)(Dimensions of 90o Bends)	-	1500	Full Testing charge refer to IS 10124 (P-1)@14000
3.1(General)	-	12000	Full Testing charge refer to IS 10124 (P-1)@14000
3.2, 3.2.1, Fig 2(Manufacture)	-	500	-
3.2.3(the socket measurement shall comply with IS 10124 (Part 1).)	-	500	-

11 Jan, 2027

-
Up to & Including 630mm

11391

CIPET: CENTRE FOR SKILLING AND TECHNICAL SUPPORT (CSTS) - CHHATRAPATI SAMBHAJINAGAR

7123534

IS 15827 (2019)

Cladding films for greenhouse / polyhouse - Specifications (First Revision)

1874000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Material Identification)	-	2000	-
6.1(Appearance & surface finish)	-	500	-
Cl. no. 6.3 & Table 2(Tensile strength & elongation at break (TD & MD))	-	2450	-
6.3(Dart Drop test)	-	1100	-
6.3(Total Visible Light Transmittance)	-	1100	-
6.3(Haze)	-	1100	-
6.3(Tear Strength ( MD & TD))	-	2450	-
7.4(IR eefectiveness)	-	2000	-
7.2(width)	-	500	-
7.3(Elongation under Steady Load MD)	-	1100	-
7.5(Elongation after UV Exposure MD)	-	2200	XENON ARC UV CONDITIONING FOR 2000HOURS (MINIMUM) & CHARGES VARY ACCORDING TO TIME PERIOD GIVEN IN STANDARD.
5(Material Identification)	-	2000	-
6.1(Appearance & surface finish)	-	500	-
Cl. no. 6.3 & Table 2(Tensile strength & elongation at break (TD & MD))	-	2200	-
6.3(Dart Drop test)	-	1100	-
6.3(Total Visible Light Transmittance)	-	1100	-
6.3(Haze)	-	1100	-
6.3(Tear Strength ( MD & TD))	-	2200	-
7.4(IR eefectiveness)	-	2000	-
7.2(width)	-	500	-
7.3(Elongation under Steady Load MD)	-	1100	-
7.5(Elongation after UV Exposure MD)	-	1100	-
7.1(Visual)	-	500	-
6.2(Durability ref clause No. 7.5)	-	1874000	Xenon arc UV Exposure for 10700 hours (190 x 100 + 10600 x 175) maximum possible hours. Testing hours change according to declaration
5(Material Identification)	-	0	-
6.1(Appearance & surface finish)	-	0	-
Cl. no. 6.3 & Table 2(Tensile strength & elongation at break (TD & MD))	-	0	-
6.3(Dart Drop test)	-	0	-
6.3(Total Visible Light Transmittance)	-	0	-
6.3(Haze)	-	0	-
6.3(Tear Strength ( MD & TD))	-	0	-
7.4(IR eefectiveness)	-	0	-
7.2(width)	-	0	-
7.3(Elongation under Steady Load MD)	-	0	-
7.5(Elongation after UV Exposure MD)	-	0	-
7.1(Visual)	-	0	-
6.2(Durability ref clause No. 7.5)	-	0	-
5(Material Identification)	-	0	-
6.1(Appearance & surface finish)	-	0	-
Cl. no. 6.3 & Table 2(Tensile strength & elongation at break (TD & MD))	-	0	-
6.3(Dart Drop test)	-	0	-
6.3(Total Visible Light Transmittance)	-	0	-
6.3(Haze)	-	0	-
6.3(Tear Strength ( MD & TD))	-	0	-
7.4(IR eefectiveness)	-	0	-
7.2(width)	-	0	-
7.3(Elongation under Steady Load MD)	-	0	-
7.5(Elongation after UV Exposure MD)	-	0	-
7.1(Visual)	-	0	-
6.2(Durability ref clause No. 7.5)	-	0	-
5(Material Identification)	-	0	-
6.1(Appearance & surface finish)	-	0	-
Cl. no. 6.3 & Table 2(Tensile strength & elongation at break (TD & MD))	-	0	-
6.3(Dart Drop test)	-	0	-
6.3(Total Visible Light Transmittance)	-	0	-
6.3(Haze)	-	0	-
6.3(Tear Strength ( MD & TD))	-	0	-
7.4(IR eefectiveness)	-	0	-
7.2(width)	-	0	-
7.3(Elongation under Steady Load MD)	-	0	-
7.5(Elongation after UV Exposure MD)	-	0	-
7.1(Visual)	-	0	-
6.2(Durability ref clause No. 7.5)	-	0	-

31 Dec, 2026

-
-

11392

ARDM Labs Pvt Ltd

8175706

IS 10124 : Part 7 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 7 specific requirements for threaded adaptors (Second Revision)

14000 View breakup
(including test for PVC resin)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.3.2, table 1, fig 1(Dimensions)	-	1000	Full Testing Charge refer to IS 10124 (P-1)@14000
3.3.3(socket measurement shall comply with IS 10124 (Part 1).)	-	500	Full Testing Charge refer to IS 10124 (P-1)@14000
Table 1 (Clauses 3.3.1 and 3.3.2)(Dimensions of Threaded Adaptors)	-	1000	Full Testing Charge refer to IS 10124 (P-1)@14000
3.1(General)	-	12000	Full Testing Charge refer to IS 10124 (P-1)@14000
3.2(Materials)	-	500	-
3.3, 3.3.1, Fig 1(Manufacture)	-	500	-

11 Jan, 2027

-
Up to & Including 630mm

11393

ARDM Labs Pvt Ltd

8175706

IS 10124 : Part 6 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 6 specific requirements for flanged tail pieces with metallic flanges (Second Revision)

14000 View breakup
(including test for PVC resin)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2.2, Fig 2, table 2(Dimensions)	-	1000	Full test Charges refer to IS 10124 (P-1)
Table 1 (Clause 3.2.2, and Fig. 1)(Dimensions of PVC Flanged Tail Piece with Metallic Flanges)	-	500	Full test Charges refer to IS 10124 (P-1)
Table 2 (Cl.3.2.2, and Fig.1)(Dimensions of Flanged Tail Piece with Metallic Flange for Elastomeric Sealing Ring Joint)	-	500	Full test Charges refer to IS 10124 (P-1)
3.1(General)	-	12000	Full test Charges refer to IS 10124 (P-1)
3.2, 3.2.1, Fig 1(Manufacture)	-	500	-

11 Jan, 2027

-
Up to & Including 630mm

11394

ARDM Labs Pvt Ltd

8175706

IS 10124 : Part 5 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 5 specific requirements for equal tees (Second Revision)

14000 View breakup
(including test for PVC resin)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2.2, Fig 1(Dimensions)	-	2000	Full Testing Charge refer to IS 10124 (P-1)@14000
Table 1(Cl.3.2.2, and Fig.1)(Dimensions of Equal Tees)	-	500	Full Testing Charge refer to IS 10124 (P-1)@14000
3.1(General)	-	12000	Full Testing Charge refer to IS 10124 (P-1)@14000
3.2, 3.2.1, Fig 1(Manufacture)	-	500	-

11 Jan, 2027

-
Up to & Including 630mm

11395

CIPET: CENTRE FOR SKILLING AND TECHNICAL SUPPORT (CSTS) - CHHATRAPATI SAMBHAJINAGAR

7123534

IS 17731 (2021)

Agro-Textiles Laminated Woven Orchard Protection Covers Specification

198550 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause No. 7, Table 1, (i)(Thickness, mm, Min)	-	250	-
Clause no. 7, Table 1, (ii)(Mass, g/m2, Min)	-	500	-
Clause No. 7, Table 1, (iii) a("Average breaking strength of laminated woven orchard protection cover fabric (Strip method, 325 mm × 50 mm test piece with gauge length of 200 mm), N, Min, (a) Warpway")	-	2450	1100+1100+250
Clause No. 7, Table 1, (iii) b("Average breaking strength of laminated woven orchard protection cover fabric (Strip method, 325 mm × 50 mm test piece with gauge length of 200 mm), N, Min, (b) Weftway")	-	2450	1100+1100+250
Clause No. 7, Table 1, (iv)("Retention of breaking strength after UV exposure of 1000 h, percentage of original actual value (fabric), percent, Min")	-	173500	XENON ARC uv CONDITIONING FOR 1000 HOURS
Clause No. 7, Table 1, (iv)("Retention of breaking strength after UV exposure of 1000 h, percentage of original actual value (fabric), percent, Min")	-	2450	1100+1100+250
Clause No. 7, Table 1, (v)(Strain at maximum load, percent)	-	0	-
Clause No. 7, Table 1, (vi)("Impact failure load at 1524 mm drop, Min, gram force at 50 percent failure")	-	1100	-
Clause No. 7, Table 1, (vii)(Reinforcement band strength, N, Min)	-	1100	-
Clause No. 7, Table 1, (viii)(Ash content, percent, Max)	-	950	-
Clause No. 7, Table 1, (ix)(Total visible light transmission, percent)	-	1100	-
Clause No. 7, Table 1, (x)(Light diffusion, percent)	-	1100	-
Clause No. 7, Table 1, (xi)(Thermicity IR effectiveness, percent)	-	2000	-
Clause No. 4.1(Width and linear density of HDPE Tapes)	-	500	-
Clause No. 4.1.1(Heat shrinkage of HDPE Tapes)	-	1000	-
Clause No. 6.1.2(Sandwich lamination thickness , micron)	-	500	-
Clause No. 6.2(Joints/Seams)	-	500	-
Clause No. 6.3(Number and position of metal eyelets)	-	500	-
Clause No. 7.1(colour , texture and finish)	-	500	-
Clause No. 7, Table 1, (i)(Thickness, mm, Min)	-	500	-
Clause no. 7, Table 1, (ii)(Mass, g/m2, Min)	-	500	-
Clause No. 7, Table 1, (iii) a("Average breaking strength of laminated woven orchard protection cover fabric (Strip method, 325 mm × 50 mm test piece with gauge length of 200 mm), N, Min, (a) Warpway")	-	1100	-
Clause No. 7, Table 1, (iii) b("Average breaking strength of laminated woven orchard protection cover fabric (Strip method, 325 mm × 50 mm test piece with gauge length of 200 mm), N, Min, (b) Weftway")	-	1100	-
Clause No. 7, Table 1, (iv)("Retention of breaking strength after UV exposure of 1000 h, percentage of original actual value (fabric), percent, Min")	-	1100	-
Clause No. 7, Table 1, (iv)("Retention of breaking strength after UV exposure of 1000 h, percentage of original actual value (fabric), percent, Min")	-	1100	-
Clause No. 7, Table 1, (v)(Strain at maximum load, percent)	-	1100	-
Clause No. 7, Table 1, (vi)("Impact failure load at 1524 mm drop, Min, gram force at 50 percent failure")	-	1100	-
Clause No. 7, Table 1, (vii)(Reinforcement band strength, N, Min)	-	1100	-
Clause No. 7, Table 1, (viii)(Ash content, percent, Max)	-	925	-
Clause No. 7, Table 1, (ix)(Total visible light transmission, percent)	-	1100	-
Clause No. 7, Table 1, (x)(Light diffusion, percent)	-	1100	-
Clause No. 7, Table 1, (xi)(Thermicity IR effectiveness, percent)	-	2000	-
Clause No. 4.1(Width and linear density of HDPE Tapes)	-	500	-
Clause No. 4.1.1(Heat shrinkage of HDPE Tapes)	-	1000	-
Clause No. 6.1.2(Sandwich lamination thickness , micron)	-	500	-
Clause No. 6.2(Joints/Seams)	-	500	-
Clause No. 6.3(Number and position of metal eyelets)	-	500	-
Clause No. 7.1(colour , texture and finish)	-	500	-
Clause No. 6.1.1(Coating Lamination thickness, micron)	-	500	-
Clause No. 7, Table 1, (i)(Thickness, mm, Min)	-	0	-
Clause no. 7, Table 1, (ii)(Mass, g/m2, Min)	-	0	-
Clause No. 7, Table 1, (iii) a("Average breaking strength of laminated woven orchard protection cover fabric (Strip method, 325 mm × 50 mm test piece with gauge length of 200 mm), N, Min, (a) Warpway")	-	0	-
Clause No. 7, Table 1, (iii) b("Average breaking strength of laminated woven orchard protection cover fabric (Strip method, 325 mm × 50 mm test piece with gauge length of 200 mm), N, Min, (b) Weftway")	-	0	-
Clause No. 7, Table 1, (iv)("Retention of breaking strength after UV exposure of 1000 h, percentage of original actual value (fabric), percent, Min")	-	0	-
Clause No. 7, Table 1, (iv)("Retention of breaking strength after UV exposure of 1000 h, percentage of original actual value (fabric), percent, Min")	-	0	-
Clause No. 7, Table 1, (v)(Strain at maximum load, percent)	-	0	-
Clause No. 7, Table 1, (vi)("Impact failure load at 1524 mm drop, Min, gram force at 50 percent failure")	-	0	-
Clause No. 7, Table 1, (vii)(Reinforcement band strength, N, Min)	-	0	-
Clause No. 7, Table 1, (viii)(Ash content, percent, Max)	-	0	-
Clause No. 7, Table 1, (ix)(Total visible light transmission, percent)	-	0	-
Clause No. 7, Table 1, (x)(Light diffusion, percent)	-	0	-
Clause No. 7, Table 1, (xi)(Thermicity IR effectiveness, percent)	-	0	-
Clause No. 4.1(Width and linear density of HDPE Tapes)	-	0	-
Clause No. 4.1.1(Heat shrinkage of HDPE Tapes)	-	0	-
Clause No. 6.1.2(Sandwich lamination thickness , micron)	-	0	-
Clause No. 6.2(Joints/Seams)	-	0	-
Clause No. 6.3(Number and position of metal eyelets)	-	0	-
Clause No. 7.1(colour , texture and finish)	-	0	-
Clause No. 6.1.1(Coating Lamination thickness, micron)	-	0	-
Clause No. 7, Table 1, (i)(Thickness, mm, Min)	-	0	-
Clause no. 7, Table 1, (ii)(Mass, g/m2, Min)	-	0	-
Clause No. 7, Table 1, (iii) a("Average breaking strength of laminated woven orchard protection cover fabric (Strip method, 325 mm × 50 mm test piece with gauge length of 200 mm), N, Min, (a) Warpway")	-	0	-
Clause No. 7, Table 1, (iii) b("Average breaking strength of laminated woven orchard protection cover fabric (Strip method, 325 mm × 50 mm test piece with gauge length of 200 mm), N, Min, (b) Weftway")	-	0	-
Clause No. 7, Table 1, (iv)("Retention of breaking strength after UV exposure of 1000 h, percentage of original actual value (fabric), percent, Min")	-	0	-
Clause No. 7, Table 1, (iv)("Retention of breaking strength after UV exposure of 1000 h, percentage of original actual value (fabric), percent, Min")	-	0	-
Clause No. 7, Table 1, (v)(Strain at maximum load, percent)	-	0	-
Clause No. 7, Table 1, (vi)("Impact failure load at 1524 mm drop, Min, gram force at 50 percent failure")	-	0	-
Clause No. 7, Table 1, (vii)(Reinforcement band strength, N, Min)	-	0	-
Clause No. 7, Table 1, (viii)(Ash content, percent, Max)	-	0	-
Clause No. 7, Table 1, (ix)(Total visible light transmission, percent)	-	0	-
Clause No. 7, Table 1, (x)(Light diffusion, percent)	-	0	-
Clause No. 7, Table 1, (xi)(Thermicity IR effectiveness, percent)	-	0	-
Clause No. 4.1(Width and linear density of HDPE Tapes)	-	0	-
Clause No. 4.1.1(Heat shrinkage of HDPE Tapes)	-	0	-
Clause No. 6.1.2(Sandwich lamination thickness , micron)	-	0	-
Clause No. 6.2(Joints/Seams)	-	0	-
Clause No. 6.3(Number and position of metal eyelets)	-	0	-
Clause No. 7.1(colour , texture and finish)	-	0	-
Clause No. 6.1.1(Coating Lamination thickness, micron)	-	0	-
Clause No. 7, Table 1, (i)(Thickness, mm, Min)	-	0	-
Clause no. 7, Table 1, (ii)(Mass, g/m2, Min)	-	0	-
Clause No. 7, Table 1, (iii) a("Average breaking strength of laminated woven orchard protection cover fabric (Strip method, 325 mm × 50 mm test piece with gauge length of 200 mm), N, Min, (a) Warpway")	-	0	-
Clause No. 7, Table 1, (iii) b("Average breaking strength of laminated woven orchard protection cover fabric (Strip method, 325 mm × 50 mm test piece with gauge length of 200 mm), N, Min, (b) Weftway")	-	0	-
Clause No. 7, Table 1, (iv)("Retention of breaking strength after UV exposure of 1000 h, percentage of original actual value (fabric), percent, Min")	-	0	-
Clause No. 7, Table 1, (iv)("Retention of breaking strength after UV exposure of 1000 h, percentage of original actual value (fabric), percent, Min")	-	0	-
Clause No. 7, Table 1, (v)(Strain at maximum load, percent)	-	0	-
Clause No. 7, Table 1, (vi)("Impact failure load at 1524 mm drop, Min, gram force at 50 percent failure")	-	0	-
Clause No. 7, Table 1, (vii)(Reinforcement band strength, N, Min)	-	0	-
Clause No. 7, Table 1, (viii)(Ash content, percent, Max)	-	0	-
Clause No. 7, Table 1, (ix)(Total visible light transmission, percent)	-	0	-
Clause No. 7, Table 1, (x)(Light diffusion, percent)	-	0	-
Clause No. 7, Table 1, (xi)(Thermicity IR effectiveness, percent)	-	0	-
Clause No. 4.1(Width and linear density of HDPE Tapes)	-	0	-
Clause No. 4.1.1(Heat shrinkage of HDPE Tapes)	-	0	-
Clause No. 6.1.2(Sandwich lamination thickness , micron)	-	0	-
Clause No. 6.2(Joints/Seams)	-	0	-
Clause No. 6.3(Number and position of metal eyelets)	-	0	-
Clause No. 7.1(colour , texture and finish)	-	0	-
Clause No. 6.1.1(Coating Lamination thickness, micron)	-	0	-
Cl-4.2("Fabric - tapes/dm in warp and weft directions and width of selvedge ")	-	0	-
Cl-6.4(Rope for Tying the Laminated Woven Orchard Protection Cover)	-	0	-

31 Dec, 2026

-
Included w.e.f.04-04-2024.

11396

ARDM Labs Pvt Ltd

8175706

IS 10124 : Part 4 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 4 specific requirements for caps (Second Revision)

14000 View breakup
(including test for PVC resin)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2.2, Fig 1(Dimensions)	-	2000	FULL TESTING CHARGES AS PER 10124 PART 1
Table 1(Cl.3.2.2, and Fig.1)(Dimensions of Caps)	-	500	FULL TESTING CHARGES AS PER 10124 PART 1
3.1(General)	-	12000	FULL TESTING CHARGES AS PER 10124 PART 1
3.2, 3.2.1, Fig 1(Manufacture)	-	500	-
3.1(General)	-	0	-

11 Jan, 2027

-
Up to & Including 630mm

11397

CIPET: CENTRE FOR SKILLING AND TECHNICAL SUPPORT (CSTS) - CHHATRAPATI SAMBHAJINAGAR

7123534

IS 17730 : Part 2 (2021)

Agro-Textiles Hail Protection Nets for Agriculture and Horticulture Purposes Specification Part 2 Woven Hail Protection Nets

33610 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 7, Table 1, (i)(Mass in g/m2, (with a tolerance of ± 5 percent))	-	500	-
Clause 7, table 1, (ii) a("Average breaking strength of Woven hail protection fabric (Strip method, 325 × 50 mm test piece with gauge length of 200 mm), N,Min,(a) Warpway")	-	2450	1100+1100+250
Clause 7,table 1, (ii) b("Average breaking strength of woven hail protection fabric (Strip method, 325 × 50 mm test piece with gauge length of 200 mm), N,Min,(b) Weftway")	-	2450	-
Clause 7, table 1, (iii)("Retention of breaking strength after UV exposure of 144 hours, percent, Min")	-	8260	-
Clause 7,table 1, (iv)(Colour fastness to artificial light (Applicable for coloured hail protection nets only))	-	850	-
Clause 7, table 1, (v)(Bursting pressure, kgf/cm2, Min)	-	1100	-
Clause 7, table 1, (vi)(Shading percentage, percent, Max)	-	1000	-
Clause 7, table 1, (vii)(Porosity, percent)	-	1350	1100+250
Clause 7, table 1, (viii)(Cold cracking resistance test at –10 °C)	-	1100	-
Clause 7, table 1, (ix)(Seam (joint) strength, percent, Min)	-	1100	-
Clause 7, Table 1, (i)(Mass in g/m2, (with a tolerance of ± 5 percent))	-	500	-
Clause 7, table 1, (ii) a("Average breaking strength of Woven hail protection fabric (Strip method, 325 × 50 mm test piece with gauge length of 200 mm), N,Min,(a) Warpway")	-	2200	-
Clause 7,table 1, (ii) b("Average breaking strength of woven hail protection fabric (Strip method, 325 × 50 mm test piece with gauge length of 200 mm), N,Min,(b) Weftway")	-	2200	-
Clause 7, table 1, (iii)("Retention of breaking strength after UV exposure of 144 hours, percent, Min")	-	2200	8480+2200
Clause 7,table 1, (iv)(Colour fastness to artificial light (Applicable for coloured hail protection nets only))	-	850	-
Clause 7, table 1, (v)(Bursting pressure, kgf/cm2, Min)	-	1100	-
Clause 7, table 1, (vi)(Shading percentage, percent, Max)	-	1100	-
Clause 7, table 1, (vii)(Porosity, percent)	-	500	-
Clause 7, table 1, (viii)(Cold cracking resistance test at –10 °C)	-	1100	-
Clause 7, table 1, (ix)(Seam (joint) strength, percent, Min)	-	1100	-
Clause 7, Table 1, (i)(Mass in g/m2, (with a tolerance of ± 5 percent))	-	500	-
Clause 7, table 1, (ii) a("Average breaking strength of Woven hail protection fabric (Strip method, 325 × 50 mm test piece with gauge length of 200 mm), N,Min,(a) Warpway")	-	1100	-
Clause 7,table 1, (ii) b("Average breaking strength of woven hail protection fabric (Strip method, 325 × 50 mm test piece with gauge length of 200 mm), N,Min,(b) Weftway")	-	1100	-
Clause 7, table 1, (iii)("Retention of breaking strength after UV exposure of 144 hours, percent, Min")	-	2200	8480+2200
Clause 7,table 1, (iv)(Colour fastness to artificial light (Applicable for coloured hail protection nets only))	-	850	-
Clause 7, table 1, (v)(Bursting pressure, kgf/cm2, Min)	-	1100	-
Clause 7, table 1, (vi)(Shading percentage, percent, Max)	-	1100	-
Clause 7, table 1, (vii)(Porosity, percent)	-	500	-
Clause 7, table 1, (viii)(Cold cracking resistance test at –10 °C)	-	1100	-
Clause 7, table 1, (ix)(Seam (joint) strength, percent, Min)	-	1100	-
Clause 7, Table 1, (i)(Mass in g/m2, (with a tolerance of ± 5 percent))	-	0	-
Clause 7, table 1, (ii) a("Average breaking strength of Woven hail protection fabric (Strip method, 325 × 50 mm test piece with gauge length of 200 mm), N,Min,(a) Warpway")	-	0	-
Clause 7,table 1, (ii) b("Average breaking strength of woven hail protection fabric (Strip method, 325 × 50 mm test piece with gauge length of 200 mm), N,Min,(b) Weftway")	-	0	-
Clause 7, table 1, (iii)("Retention of breaking strength after UV exposure of 144 hours, percent, Min")	-	0	-
Clause 7,table 1, (iv)(Colour fastness to artificial light (Applicable for coloured hail protection nets only))	-	0	-
Clause 7, table 1, (v)(Bursting pressure, kgf/cm2, Min)	-	0	-
Clause 7, table 1, (vi)(Shading percentage, percent, Max)	-	0	-
Clause 7, table 1, (vii)(Porosity, percent)	-	0	-
Clause 7, table 1, (viii)(Cold cracking resistance test at –10 °C)	-	0	-
Clause 7, table 1, (ix)(Seam (joint) strength, percent, Min)	-	0	-
Clause 7, Table 1, (i)(Mass in g/m2, (with a tolerance of ± 5 percent))	-	0	-
Clause 7, table 1, (ii) a("Average breaking strength of Woven hail protection fabric (Strip method, 325 × 50 mm test piece with gauge length of 200 mm), N,Min,(a) Warpway")	-	0	-
Clause 7,table 1, (ii) b("Average breaking strength of woven hail protection fabric (Strip method, 325 × 50 mm test piece with gauge length of 200 mm), N,Min,(b) Weftway")	-	0	-
Clause 7, table 1, (iii)("Retention of breaking strength after UV exposure of 144 hours, percent, Min")	-	0	-
Clause 7,table 1, (iv)(Colour fastness to artificial light (Applicable for coloured hail protection nets only))	-	0	-
Clause 7, table 1, (v)(Bursting pressure, kgf/cm2, Min)	-	0	-
Clause 7, table 1, (vi)(Shading percentage, percent, Max)	-	0	-
Clause 7, table 1, (vii)(Porosity, percent)	-	0	-
Clause 7, table 1, (viii)(Cold cracking resistance test at –10 °C)	-	0	-
Clause 7, table 1, (ix)(Seam (joint) strength, percent, Min)	-	0	-
Clause 7, Table 1, (i)(Mass in g/m2, (with a tolerance of ± 5 percent))	-	0	-
Clause 7, table 1, (ii) a("Average breaking strength of Woven hail protection fabric (Strip method, 325 × 50 mm test piece with gauge length of 200 mm), N,Min,(a) Warpway")	-	0	-
Clause 7,table 1, (ii) b("Average breaking strength of woven hail protection fabric (Strip method, 325 × 50 mm test piece with gauge length of 200 mm), N,Min,(b) Weftway")	-	0	-
Clause 7, table 1, (iii)("Retention of breaking strength after UV exposure of 144 hours, percent, Min")	-	0	-
Clause 7,table 1, (iv)(Colour fastness to artificial light (Applicable for coloured hail protection nets only))	-	0	-
Clause 7, table 1, (v)(Bursting pressure, kgf/cm2, Min)	-	0	-
Clause 7, table 1, (vi)(Shading percentage, percent, Max)	-	0	-
Clause 7, table 1, (vii)(Porosity, percent)	-	0	-
Clause 7, table 1, (viii)(Cold cracking resistance test at –10 °C)	-	0	-
Clause 7, table 1, (ix)(Seam (joint) strength, percent, Min)	-	0	-
Clause 7, Table 1, (i)(Mass in g/m2, (with a tolerance of ± 5 percent))	-	0	-
Clause 7, table 1, (ii) a("Average breaking strength of Woven hail protection fabric (Strip method, 325 × 50 mm test piece with gauge length of 200 mm), N,Min,(a) Warpway")	-	0	-
Clause 7,table 1, (ii) b("Average breaking strength of woven hail protection fabric (Strip method, 325 × 50 mm test piece with gauge length of 200 mm), N,Min,(b) Weftway")	-	0	-
Clause 7, table 1, (iii)("Retention of breaking strength after UV exposure of 144 hours, percent, Min")	-	0	-
Clause 7,table 1, (iv)(Colour fastness to artificial light (Applicable for coloured hail protection nets only))	-	0	-
Clause 7, table 1, (v)(Bursting pressure, kgf/cm2, Min)	-	0	-
Clause 7, table 1, (vi)(Shading percentage, percent, Max)	-	0	-
Clause 7, table 1, (vii)(Porosity, percent)	-	0	-
Clause 7, table 1, (viii)(Cold cracking resistance test at –10 °C)	-	0	-
Clause 7, table 1, (ix)(Seam (joint) strength, percent, Min)	-	0	-
7.1(Dimensions)	-	0	-
Cl-4.1(HDPE Monofilament)	-	0	-
Cl-4.1.1(The heat shrinkage of the monofilament yarn)	-	0	-
Cl-6.1(Fabric)	-	0	-
Cl-6.2(Reinforcement)	-	0	-
Cl-6.3(Joints)	-	0	-
Cl-6.4(Stitching)	-	0	-
Cl-6.5(Colour)	-	0	-
Cl-7.1(Dimensions)	-	0	-
Clause 7, Table 1, (i)(Mass in g/m2, (with a tolerance of ± 5 percent))	-	0	-
Clause 7, table 1, (ii) a("Average breaking strength of Woven hail protection fabric (Strip method, 325 × 50 mm test piece with gauge length of 200 mm), N,Min,(a) Warpway")	-	0	-
Clause 7,table 1, (ii) b("Average breaking strength of woven hail protection fabric (Strip method, 325 × 50 mm test piece with gauge length of 200 mm), N,Min,(b) Weftway")	-	0	-
Clause 7, table 1, (iii)("Retention of breaking strength after UV exposure of 144 hours, percent, Min")	-	0	-
Clause 7,table 1, (iv)(Colour fastness to artificial light (Applicable for coloured hail protection nets only))	-	0	-
Clause 7, table 1, (v)(Bursting pressure, kgf/cm2, Min)	-	0	-
Clause 7, table 1, (vi)(Shading percentage, percent, Max)	-	0	-
Clause 7, table 1, (vii)(Porosity, percent)	-	0	-
Clause 7, table 1, (viii)(Cold cracking resistance test at –10 °C)	-	0	-
Clause 7, table 1, (ix)(Seam (joint) strength, percent, Min)	-	0	-
7.1(Dimensions)	-	0	-
Cl-4.1(HDPE Monofilament)	-	0	-
Cl-4.1.1(The heat shrinkage of the monofilament yarn)	-	0	-
Cl-6.1(Fabric)	-	0	-
Cl-6.2(Reinforcement)	-	0	-
Cl-6.3(Joints)	-	0	-
Cl-6.4(Stitching)	-	0	-
Cl-6.5(Colour)	-	0	-
Cl-7.1(Dimensions)	-	0	-
Clause 7, Table 1, (i)(Mass in g/m2, (with a tolerance of ± 5 percent))	-	0	-
Clause 7, table 1, (ii) a("Average breaking strength of Woven hail protection fabric (Strip method, 325 × 50 mm test piece with gauge length of 200 mm), N,Min,(a) Warpway")	-	0	-
Clause 7,table 1, (ii) b("Average breaking strength of woven hail protection fabric (Strip method, 325 × 50 mm test piece with gauge length of 200 mm), N,Min,(b) Weftway")	-	0	-
Clause 7, table 1, (iii)("Retention of breaking strength after UV exposure of 144 hours, percent, Min")	-	0	-
Clause 7,table 1, (iv)(Colour fastness to artificial light (Applicable for coloured hail protection nets only))	-	0	-
Clause 7, table 1, (v)(Bursting pressure, kgf/cm2, Min)	-	0	-
Clause 7, table 1, (vi)(Shading percentage, percent, Max)	-	0	-
Clause 7, table 1, (vii)(Porosity, percent)	-	0	-
Clause 7, table 1, (viii)(Cold cracking resistance test at –10 °C)	-	0	-
Clause 7, table 1, (ix)(Seam (joint) strength, percent, Min)	-	0	-
7.1(Dimensions)	-	0	-
Cl-4.1(HDPE Monofilament)	-	0	-
Cl-4.1.1(The heat shrinkage of the monofilament yarn)	-	0	-
Cl-6.1(Fabric)	-	0	-
Cl-6.2(Reinforcement)	-	0	-
Cl-6.3(Joints)	-	0	-
Cl-6.4(Stitching)	-	0	-
Cl-6.5(Colour)	-	0	-
Cl-7.1(Dimensions)	-	0	-
Clause 7, Table 1, (i)(Mass in g/m2, (with a tolerance of ± 5 percent))	-	0	-
Clause 7, table 1, (ii) a("Average breaking strength of Woven hail protection fabric (Strip method, 325 × 50 mm test piece with gauge length of 200 mm), N,Min,(a) Warpway")	-	0	-
Clause 7,table 1, (ii) b("Average breaking strength of woven hail protection fabric (Strip method, 325 × 50 mm test piece with gauge length of 200 mm), N,Min,(b) Weftway")	-	0	-
Clause 7, table 1, (iii)("Retention of breaking strength after UV exposure of 144 hours, percent, Min")	-	0	-
Clause 7,table 1, (iv)(Colour fastness to artificial light (Applicable for coloured hail protection nets only))	-	0	-
Clause 7, table 1, (v)(Bursting pressure, kgf/cm2, Min)	-	0	-
Clause 7, table 1, (vi)(Shading percentage, percent, Max)	-	0	-
Clause 7, table 1, (vii)(Porosity, percent)	-	0	-
Clause 7, table 1, (viii)(Cold cracking resistance test at –10 °C)	-	0	-
Clause 7, table 1, (ix)(Seam (joint) strength, percent, Min)	-	0	-
7.1(Dimensions)	-	0	-
Cl-4.1(HDPE Monofilament)	-	0	-
Cl-4.1.1(The heat shrinkage of the monofilament yarn)	-	0	-
Cl-6.1(Fabric)	-	0	-
Cl-6.2(Reinforcement)	-	0	-
Cl-6.3(Joints)	-	0	-
Cl-6.4(Stitching)	-	0	-
Cl-6.5(Colour)	-	0	-
Cl-7.1(Dimensions)	-	0	-

31 Dec, 2026

-
Included w.e.f.04-04-2024.

11398

CIPET: CENTRE FOR SKILLING AND TECHNICAL SUPPORT (CSTS) - CHHATRAPATI SAMBHAJINAGAR

7123534

IS 17730 : Part 1 (2021)

Agro-Textiles Hail Protection Nets for Agriculture and Horticulture Purposes Specification Part 1 Warp Knitted Hail Protection Nets

32310 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 7, Table 1, (i)(Mass in g/m2, (with a tolerance of ± 5 percent))	-	500	-
Clause 7, table 1, (ii) a("Average breaking strength of knitted hail protection fabric (Strip method, 325 × 50 mm test piece with gauge length of 200 mm), N,Min,(a) Wales direction")	-	2450	1100+1100+250
Clause 7,table 1, (ii) b("Average breaking strength of knitted hail protection fabric (Strip method, 325 × 50 mm test piece with gauge length of 200 mm), N,Min,(b) Course direction")	-	2450	1100+1100+250
Clause 7, table 1, (iii)("Retention of breaking strength after UV exposure of 144 hours, percent, Min")	-	8260	144 HRS UV CONDITIONING
Clause 7,table 1, (iv)(Colour fastness to artificial light (Applicable for coloured hail protection only))	-	850	-
Clause 7, table 1, (v)(Bursting pressure, kgf/cm2, Min)	-	1100	-
Clause 7, table 1, (vi)(Shading percentage, percent, Max)	-	1000	-
Clause 7, table 1, (vii)(Cold cracking resistance test at – 10 °C)	-	1100	-
Clause 7, table 1, (viii)(Seam (joint) strength, percent, Min)	-	1100	-
Clause 7, Table 1, (i)(Mass in g/m2, (with a tolerance of ± 5 percent))	-	500	-
Clause 7, table 1, (ii) a("Average breaking strength of knitted hail protection fabric (Strip method, 325 × 50 mm test piece with gauge length of 200 mm), N,Min,(a) Wales direction")	-	2450	-
Clause 7,table 1, (ii) b("Average breaking strength of knitted hail protection fabric (Strip method, 325 × 50 mm test piece with gauge length of 200 mm), N,Min,(b) Course direction")	-	2450	-
Clause 7, table 1, (iii)("Retention of breaking strength after UV exposure of 144 hours, percent, Min")	-	8260	10680=8480+2200
Clause 7,table 1, (iv)(Colour fastness to artificial light (Applicable for coloured hail protection only))	-	850	-
Clause 7, table 1, (v)(Bursting pressure, kgf/cm2, Min)	-	1100	-
Clause 7, table 1, (vi)(Shading percentage, percent, Max)	-	1100	-
Clause 7, table 1, (vii)(Cold cracking resistance test at – 10 °C)	-	1100	-
Clause 7, table 1, (viii)(Seam (joint) strength, percent, Min)	-	1100	-
4.1(HDPE Monofilament (linear density))	-	500	-
4.1.1(Heat shrinkage at 60 degree to 95 degree)	-	2000	-
6.1(Fabric (width))	-	500	-
6.2(Reinforcement)	-	500	-
6.3(Joints)	-	500	-
6.4(Stitching)	-	500	-
6.5(Colour)	-	500	-
7.1(Length, Width)	-	1000	-
Clause 7, Table 1, (i)(Mass in g/m2, (with a tolerance of ± 5 percent))	-	500	-
Clause 7, table 1, (ii) a("Average breaking strength of knitted hail protection fabric (Strip method, 325 × 50 mm test piece with gauge length of 200 mm), N,Min,(a) Wales direction")	-	2200	-
Clause 7,table 1, (ii) b("Average breaking strength of knitted hail protection fabric (Strip method, 325 × 50 mm test piece with gauge length of 200 mm), N,Min,(b) Course direction")	-	2200	-
Clause 7, table 1, (iii)("Retention of breaking strength after UV exposure of 144 hours, percent, Min")	-	10650	-
Clause 7,table 1, (iv)(Colour fastness to artificial light (Applicable for coloured hail protection only))	-	850	-
Clause 7, table 1, (v)(Bursting pressure, kgf/cm2, Min)	-	1100	-
Clause 7, table 1, (vi)(Shading percentage, percent, Max)	-	1100	-
Clause 7, table 1, (vii)(Cold cracking resistance test at – 10 °C)	-	1100	-
Clause 7, table 1, (viii)(Seam (joint) strength, percent, Min)	-	1100	-
4.1(HDPE Monofilament (linear density))	-	500	-
4.1.1(Heat shrinkage at 60 degree to 95 degree)	-	2000	-
6.1(Fabric (width))	-	500	-
6.2(Reinforcement)	-	500	-
6.3(Joints)	-	500	-
6.4(Stitching)	-	500	-
6.5(Colour)	-	500	-
7.1(Length, Width)	-	1000	-
Clause 7, Table 1, (i)(Mass in g/m2, (with a tolerance of ± 5 percent))	-	0	-
Clause 7, table 1, (ii) a("Average breaking strength of knitted hail protection fabric (Strip method, 325 × 50 mm test piece with gauge length of 200 mm), N,Min,(a) Wales direction")	-	0	-
Clause 7,table 1, (ii) b("Average breaking strength of knitted hail protection fabric (Strip method, 325 × 50 mm test piece with gauge length of 200 mm), N,Min,(b) Course direction")	-	0	-
Clause 7, table 1, (iii)("Retention of breaking strength after UV exposure of 144 hours, percent, Min")	-	0	-
Clause 7,table 1, (iv)(Colour fastness to artificial light (Applicable for coloured hail protection only))	-	0	-
Clause 7, table 1, (v)(Bursting pressure, kgf/cm2, Min)	-	0	-
Clause 7, table 1, (vi)(Shading percentage, percent, Max)	-	0	-
Clause 7, table 1, (vii)(Cold cracking resistance test at – 10 °C)	-	0	-
Clause 7, table 1, (viii)(Seam (joint) strength, percent, Min)	-	0	-
4.1(HDPE Monofilament (linear density))	-	0	-
4.1.1(Heat shrinkage at 60 degree to 95 degree)	-	0	-
6.1(Fabric (width))	-	0	-
6.2(Reinforcement)	-	0	-
6.3(Joints)	-	0	-
6.4(Stitching)	-	0	-
6.5(Colour)	-	0	-
7.1(Length, Width)	-	0	-
Clause 7, Table 1, (i)(Mass in g/m2, (with a tolerance of ± 5 percent))	-	0	-
Clause 7, table 1, (ii) a("Average breaking strength of knitted hail protection fabric (Strip method, 325 × 50 mm test piece with gauge length of 200 mm), N,Min,(a) Wales direction")	-	0	-
Clause 7,table 1, (ii) b("Average breaking strength of knitted hail protection fabric (Strip method, 325 × 50 mm test piece with gauge length of 200 mm), N,Min,(b) Course direction")	-	0	-
Clause 7, table 1, (iii)("Retention of breaking strength after UV exposure of 144 hours, percent, Min")	-	0	-
Clause 7,table 1, (iv)(Colour fastness to artificial light (Applicable for coloured hail protection only))	-	0	-
Clause 7, table 1, (v)(Bursting pressure, kgf/cm2, Min)	-	0	-
Clause 7, table 1, (vi)(Shading percentage, percent, Max)	-	0	-
Clause 7, table 1, (vii)(Cold cracking resistance test at – 10 °C)	-	0	-
Clause 7, table 1, (viii)(Seam (joint) strength, percent, Min)	-	0	-
4.1(HDPE Monofilament (linear density))	-	0	-
4.1.1(Heat shrinkage at 60 degree to 95 degree)	-	0	-
6.1(Fabric (width))	-	0	-
6.2(Reinforcement)	-	0	-
6.3(Joints)	-	0	-
6.4(Stitching)	-	0	-
6.5(Colour)	-	0	-
7.1(Length, Width)	-	0	-
Clause 7, Table 1, (i)(Mass in g/m2, (with a tolerance of ± 5 percent))	-	0	-
Clause 7, table 1, (ii) a("Average breaking strength of knitted hail protection fabric (Strip method, 325 × 50 mm test piece with gauge length of 200 mm), N,Min,(a) Wales direction")	-	0	-
Clause 7,table 1, (ii) b("Average breaking strength of knitted hail protection fabric (Strip method, 325 × 50 mm test piece with gauge length of 200 mm), N,Min,(b) Course direction")	-	0	-
Clause 7, table 1, (iii)("Retention of breaking strength after UV exposure of 144 hours, percent, Min")	-	0	-
Clause 7,table 1, (iv)(Colour fastness to artificial light (Applicable for coloured hail protection only))	-	0	-
Clause 7, table 1, (v)(Bursting pressure, kgf/cm2, Min)	-	0	-
Clause 7, table 1, (vi)(Shading percentage, percent, Max)	-	0	-
Clause 7, table 1, (vii)(Cold cracking resistance test at – 10 °C)	-	0	-
Clause 7, table 1, (viii)(Seam (joint) strength, percent, Min)	-	0	-
4.1(HDPE Monofilament (linear density))	-	0	-
4.1.1(Heat shrinkage at 60 degree to 95 degree)	-	0	-
6.1(Fabric (width))	-	0	-
6.2(Reinforcement)	-	0	-
6.3(Joints)	-	0	-
6.4(Stitching)	-	0	-
6.5(Colour)	-	0	-
7.1(Length, Width)	-	0	-
Clause 7, Table 1, (i)(Mass in g/m2, (with a tolerance of ± 5 percent))	-	0	-
Clause 7, table 1, (ii) a("Average breaking strength of knitted hail protection fabric (Strip method, 325 × 50 mm test piece with gauge length of 200 mm), N,Min,(a) Wales direction")	-	0	-
Clause 7,table 1, (ii) b("Average breaking strength of knitted hail protection fabric (Strip method, 325 × 50 mm test piece with gauge length of 200 mm), N,Min,(b) Course direction")	-	0	-
Clause 7, table 1, (iii)("Retention of breaking strength after UV exposure of 144 hours, percent, Min")	-	0	-
Clause 7,table 1, (iv)(Colour fastness to artificial light (Applicable for coloured hail protection only))	-	0	-
Clause 7, table 1, (v)(Bursting pressure, kgf/cm2, Min)	-	0	-
Clause 7, table 1, (vi)(Shading percentage, percent, Max)	-	0	-
Clause 7, table 1, (vii)(Cold cracking resistance test at – 10 °C)	-	0	-
Clause 7, table 1, (viii)(Seam (joint) strength, percent, Min)	-	0	-
4.1(HDPE Monofilament (linear density))	-	0	-
4.1.1(Heat shrinkage at 60 degree to 95 degree)	-	0	-
6.1(Fabric (width))	-	0	-
6.2(Reinforcement)	-	0	-
6.3(Joints)	-	0	-
6.4(Stitching)	-	0	-
6.5(Colour)	-	0	-
7.1(Length, Width)	-	0	-

31 Dec, 2026

-
Included w.e.f.04-04-2024.

11399

ARDM Labs Pvt Ltd

8175706

IS 10124 : Part 3 (2009)

Fabricated PVC-U Fittings for Potable Water Supplies - Specification Part 3 Specific Requirements for Straight Reducers

14000 View breakup
(including test for PVC resin)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2.2, Fig 1(Dimensions)	-	1000	Full Testing Charge refer to IS 10124 (P-1)@14000
Table-1 (cl.3.2.2, Fig 1)(Dimensions of Straight Reducers)	-	1000	Full Testing Charge refer to IS 10124 (P-1)@14000
3.1(General)	-	12000	Full Testing Charge refer to IS 10124 (P-1)@14000
3.2, 3.2.1, Fig 1(Manufacture)	-	500	-

11 Jan, 2027

-
Up to & Including 630mm

11400

ARDM Labs Pvt Ltd

8175706

IS 10124 : Part 2 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 2 specific requirements for sockets (Second Revision)

14000 View breakup
(including test for PVC resin)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2.1, Table-1, Fig-1(Nominal size)	-	500	Full Testing Charge refer to IS 10124 (P-1)& IS 10124 : Part 2
3.2.2, and Fig. 2(Dimensions of Socket for Elastomeric Sealing Ring Joint)	-	500	Full Testing Charge refer to IS 10124 (P-1)& IS 10124 : Part 2
3.2.1, Table-1, Fig-1(B)	-	500	Full Testing Charge refer to IS 10124 (P-1)& IS 10124 : Part 2
10.3 of IS 4985 & Cl. 3.1 of IS 12235(P-4)(Effect on water: Lead (First Extraction))	-	4000	Full Testing Charge refer to IS 10124 (P-1)& IS 10124 : Part 2
10.3 of IS 4985 & Cl. 3.1 of IS 12235(P-4)(Effect on water: Lead (Third Extraction))	-	0	Full Testing Charge refer to IS 10124 (P-1)& IS 10124 : Part 2
10.3 of IS 4985 & Cl. 3.1 of IS 12235(P-10)(Effect on water:Dialkyl tin C4 and higher homologues measured as tin (third extraction))	-	0	Full Testing Charge refer to IS 10124 (P-1)& IS 10124 : Part 2
10.3 of IS 4985 & Cl. 3.2 of IS 12235(P-4)(Effect on water: Cadmium (all three extracts))	-	0	Full Testing Charge refer to IS 10124 (P-1)& IS 10124 : Part 2
10.3 of IS 4985 & Cl. 3.2 of IS 12235(P-4)(Effect on water: Mercury (all three extracts))	-	0	Full Testing Charge refer to IS 10124 (P-1)& IS 10124 : Part 2
10.3 of IS 4985 & Cl. 3.2 of IS 12235(P-10)(Other toxic substances such as 'di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate' (third extraction))	-	0	Full Testing Charge refer to IS 10124 (P-1)& IS 10124 : Part 2
3.2.1, Table-1, Fig-1(Minimum wall thickness for working pressure)	-	1000	Full Testing Charge refer to IS 10124 (P-1)& IS 10124 : Part 2
3.1(General)	-	500	Full Testing Charge refer to IS 10124 (P-1)
10.7 of IS 4985(Sulphated Ash content, Annex-B of IS 4985)	-	1500	-
3.2.1, Table-1, Fig-1(Plumbing)	-	250	-
Clause 3.2.2, and Fig. 2(Nominal size)	-	500	-
Clause 3.2.2, and Fig. 2.(B)	-	500	-
Clause 3.2.2, and Fig. 2.(Minimum wall thickness for working pressure)	-	500	-

11 Jan, 2027

-
Up to & Including 630mm

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number