BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15369 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

11401

BIS, Eastern Regional Laboratory (ERL)

None

IS 7834 : Part 1 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 1 General requirements

Rs.2400/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.4 (Minimum Thickness)	-
Cl. 5.1.1, 5.1.2, Table 1, Fig 1 (Minimum Socket Length)	-
Cl. 6.1 (Stress Relief Test- Appendix A)	-
6.3 (Effect on Water)	-
Cl 6.3 (Effect on Water Lead (first extraction))	-
Cl 6.3 (Effect on Water Lead (third extraction))	-
Cl 6.3 (Effect on Water Dialkyl tin C4 and higher homologues(measuredas tin )(third extraction ))	-
Cl 6.3 (Effect on Water Cadmium (mean of first extraction, second extraction and third extraction))	-
Cl 6.3 (Effect on Water Mercury (mean of first extraction, second extraction and third extraction))	-
CL 4.0 (Wall thickness (average of 4.0))	-
CL 5.1 (Sockt Length ( Take 4 reading and minimum will be reported))	-

-
Excluding short term hydraulic test Chemical: All except Effect on Water which is for Pipes above 60 mm Nominal dia and except for the requirement of 'Other Toxic Substances such a di-n-octyl Tin -s-s bis iso-octyl mercapto acetate' and 'butyl stearate'; Mech- All except HST.

11402

Ahmedabad Textile Industry's Research Association (ATIRA), Ahmedabad

7173002

IS 15351 (2015)

Agro textiles – Laminated high density polyethylene (HDPE) woven geomembrane for water proof lining – Specification (second revision)

172500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.1 and 6.2(Thickness, mm- IS 7016: Part 1)	-	400	-
5.1.1 and 6.2(Mass, g/sq m)	-	400	-
5.1.1 and 6.2(Dimensions, mm- Annexure A of IS 11652)	-	300	-
5.1.1 and 6.2(Carbon black content, Percent- IS 2530)	-	500	-
5.1.1 and 6.2(Before UV exposure IS 13162 (Part 5)	-	800	-
5.1.1 and 6.2(Strain at Maximum load, Percent-IS 13162 (Part 5)	-	0	-
5.1.1 and 6.2( U.V exposure of 1000 h for warp and weft)	-	80800	-
5.1.1 and 6.2(Tear resistance, N, Min-Method A1 of IS 7016 (Part 3))	-	800	-
5.1.1 and 6.2(Puncture resistance, N, Min-Annex D)	-	1200	-
5.1.1 and 6.2(Bursting strength (Ball burst),N/cm², Min-)	-	800	-
5.1.1 and 6.2(Seam strength before UV exposure (N/mm), Min-IS 15060)	-	950	-
Table-1(Seam strength after UV exposure N/mm, Min-Annex B and IS 15060)	-	80950	-
5.1.1 and 6.2(Ash content, percent, Max-Annex F)	-	500	-
5.1.1 and 6.2(Thickness, mm- IS 7016: Part 1)	-	0	-
5.1.1 and 6.2(Mass, g/sq m)	-	0	-
5.1.1 and 6.2(Dimensions, mm- Annexure A of IS 11652)	-	0	-
5.1.1 and 6.2(Carbon black content, Percent- IS 2530)	-	0	-
5.1.1 and 6.2(Before UV exposure IS 13162 (Part 5)	-	0	-
5.1.1 and 6.2(Strain at Maximum load, Percent-IS 13162 (Part 5)	-	0	-
5.1.1 and 6.2( U.V exposure of 1000 h for warp and weft)	-	0	-
5.1.1 and 6.2(Tear resistance, N, Min-Method A1 of IS 7016 (Part 3))	-	0	-
5.1.1 and 6.2(Puncture resistance, N, Min-Annex D)	-	0	-
5.1.1 and 6.2(Bursting strength (Ball burst),N/cm², Min-)	-	0	-
5.1.1 and 6.2(Seam strength before UV exposure (N/mm), Min-IS 15060)	-	0	-
Table-1(Seam strength after UV exposure N/mm, Min-Annex B and IS 15060)	-	0	-
5.1.1 and 6.2(Ash content, percent, Max-Annex F)	-	0	-
5.1.1 and 6.2( Min, gram force at 50 percent failure-Annex C)	-	0	-
5.1.1 and 6.2(Hydrostatic resistance-Annex E)	-	0	-
Table-1(Hydrostatic resistance after UV exposure of 1000 h -Annex B and Annex E)	-	0	-
5.1.1 and 6.2(Thickness, mm- IS 7016: Part 1)	-	0	-
5.1.1 and 6.2(Mass, g/sq m)	-	0	-
5.1.1 and 6.2(Dimensions, mm- Annexure A of IS 11652)	-	0	-
5.1.1 and 6.2(Carbon black content, Percent- IS 2530)	-	0	-
5.1.1 and 6.2(Before UV exposure IS 13162 (Part 5)	-	0	-
5.1.1 and 6.2(Strain at Maximum load, Percent-IS 13162 (Part 5)	-	0	-
5.1.1 and 6.2( U.V exposure of 1000 h for warp and weft)	-	0	-
Table-1(Breaking load on 20 × 10 cm strip, N, Min after)	-	0	-
5.1.1 and 6.2(Impact failure load, at 1524 mm drop,)	-	3000	-
5.1.1 and 6.2(Tear resistance, N, Min-Method A1 of IS 7016 (Part 3))	-	0	-
5.1.1 and 6.2(Puncture resistance, N, Min-Annex D)	-	0	-
5.1.1 and 6.2(Seam strength before UV exposure (N/mm), Min-IS 15060)	-	0	-
Table-1(Seam strength after UV exposure N/mm, Min-Annex B and IS 15060)	-	0	-
5.1.1 and 6.2(Bursting strength (Ball burst),N/cm², Min-)	-	0	-
5.1.1 and 6.2(Ash content, percent, Max-Annex F)	-	0	-
5.1.1 and 6.2(Thickness, mm- IS 7016: Part 1)	-	0	-
5.1.1 and 6.2(Mass, g/sq m)	-	0	-
5.1.1 and 6.2(Dimensions, mm- Annexure A of IS 11652)	-	0	-
5.1.1 and 6.2(Carbon black content, Percent- IS 2530)	-	0	-
5.1.1 and 6.2(Before UV exposure IS 13162 (Part 5)	-	0	-
5.1.1 and 6.2(Strain at Maximum load, Percent-IS 13162 (Part 5)	-	0	-
5.1.1 and 6.2( U.V exposure of 1000 h for warp and weft)	-	0	-
Table-1(Breaking load on 20 × 10 cm strip, N, Min after)	-	0	-
5.1.1 and 6.2(Impact failure load, at 1524 mm drop,)	-	0	-
5.1.1 and 6.2(Tear resistance, N, Min-Method A1 of IS 7016 (Part 3))	-	0	-
5.1.1 and 6.2(Puncture resistance, N, Min-Annex D)	-	0	-
5.1.1 and 6.2(Seam strength before UV exposure (N/mm), Min-IS 15060)	-	0	-
Table-1(Seam strength after UV exposure N/mm, Min-Annex B and IS 15060)	-	0	-
5.1.1 and 6.2(Bursting strength (Ball burst),N/cm², Min-)	-	0	-
5.1.1 and 6.2(Ash content, percent, Max-Annex F)	-	0	-
5.1.1 and 6.2(Thickness, mm- IS 7016: Part 1)	-	0	-
5.1.1 and 6.2(Mass, g/sq m)	-	0	-
5.1.1 and 6.2(Dimensions, mm- Annexure A of IS 11652)	-	0	-
5.1.1 and 6.2(Carbon black content, Percent- IS 2530)	-	0	-
5.1.1 and 6.2(Before UV exposure IS 13162 (Part 5)	-	0	-
5.1.1 and 6.2(Strain at Maximum load, Percent-IS 13162 (Part 5)	-	0	-
5.1.1 and 6.2( U.V exposure of 1000 h for warp and weft)	-	0	-
Table-1(Breaking load on 20 × 10 cm strip, N, Min after)	-	0	-
5.1.1 and 6.2(Impact failure load, at 1524 mm drop,)	-	0	-
5.1.1 and 6.2(Tear resistance, N, Min-Method A1 of IS 7016 (Part 3))	-	0	-
5.1.1 and 6.2(Puncture resistance, N, Min-Annex D)	-	0	-
5.1.1 and 6.2(Seam strength before UV exposure (N/mm), Min-IS 15060)	-	0	-
Table-1(Seam strength after UV exposure N/mm, Min-Annex B and IS 15060)	-	0	-
5.1.1 and 6.2(Bursting strength (Ball burst),N/cm², Min-)	-	0	-
5.1.1 and 6.2(Ash content, percent, Max-Annex F)	-	0	-
3.1(HDPE Tapes)	-	600	-
3.2(HDPE Fabric)	-	200	-
5.2(Panel Width)	-	300	-

-
-

11403

SHIVA TEST HOUSE PRIVATE LIMITED, Ghaziabad

8177706

IS 15658 (2021)

Concrete Paving Blocks - Specification ( First Revision )

M-30 TO M-55/SINGLE & DOUBLE LAYER/50MM TO 120 MM THICK

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 7.1.1 (General Quality)	-	250	-
Clauses 7.1.2 & 9.1.2 (Visual Inspection)	-	250	-
Clause 7.1.3 (Colour and Texture)	-	250	-
Clause 7.2, Table No. 2, SI No. (i) (Width, W)	-	500	-
Clause 7.2, Table No. 2, SI No. (i) (Indivdual Width, W)	-	500	-
Clause 7.2, Table No. 2, SI No. (ii) (Length, L)	-	500	-
Clause 7.2, Table No. 2, SI No. (ii) (Indivdual Length, L)	-	500	-
Clause 7.2, Table No. 2, SI No. (iii) (Thickness, Th)	-	500	-
Clause 7.2, Table No. 2, SI No. (iii) (Indivdual Thickness, Th)	-	500	-
Clause 7.2, Table No. 2, SI No. (iv) (Aspect Ratio, L/Th)	-	500	-
Clause 7.2, Table No. 2, SI No. (iv) (Indivdual Aspect Ratio, L/Th)	-	500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Width)	-	500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Width)	-	500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Depth)	-	500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Depth)	-	500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Thickness of wearing Layer)	-	500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Indivdual Thickness of wearing Layer)	-	500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Plan Area (Asp))	-	500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Indivdual Plan Area (Asp))	-	500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Ratio of wearing face area and Plan area (Asw/Asp))	-	500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Indivdual Ratio of wearing face area and Plan area (Asw/Asp))	-	500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (ix)(Deviation from squareness)	-	500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (i) a)( Indivdual Water absorption)	-	2000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (i) b)(Water absorption (Average of three test specimens))	-	2000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) a)(Indivdual Compressive strength (i))	-	2500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) b)(Compressive strength (Average of eight test specimens))	-	2500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) i)( Indivdual Dry Abrasion Resistance )	-	2000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) ii)(Dry Abrasion resistance (Average of three test specimens))	-	2000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) i)( Indivdual Wet Abrasion Resistance )	-	2000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) ii)(Wet Abrasion resistance (Average of three test specimens))	-	2000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) a)(Indivdual Tensile splitting strength (i))	-	1500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) b)(Average Tensile splitting strength )	-	1500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (v) a)(Indivdual Flexural strength (i))	-	1500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (v) b)(Average Flexural strength )	-	1500	-
Clause 7.3, Annex F(Individual Failure Load per unit Length)	-	1500	-
Clause 7.3, Annex F(Average Failure Load per unit Length)	-	1500	-
Clause 7.3, Annex G(Individual Breaking Load)	-	1500	-
Clause 7.3, Annex G(Average Breaking Load)	-	1500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 10 cycles)	-	3000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 25 cycles)	-	3000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 50 cycles)	-	3000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Cumulative Weight losses of specimen after 10, 25 & 50 cycles)	-	3000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 10 cycles)	-	3000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 25 cycles)	-	3000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 50 cycles)	-	3000	-
Clause 3.20(Spacer nibs)	-	500	-

11 Apr, 2027

-
-

11404

Spectro Analytical Labs Private Limited, Gautam Buddha Nagar

8130426

IS 1554 : Part 1 (1988)

Specification for pvc insulated (Heavy Duty) electric cables: Part 1 for working voltages up to and including 1100 v (Third Revision)

PVC INS Type A,C ST1,2 Class 1,2 Category -01, C1 & C2

68250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
15.1 g)(High voltage test at room temperature)	-	2000	10% discount to BIS
3.1(MATERIALS : CONDUCTOR)	-	200	10% discount to BIS
4.1.1(INSULATION : General Purjose Insulaiion)	-	200	10% discount to BIS
4.1.2(INSULATION : Heat Resisting Insulation)	-	500	10% discount to BIS
5.1(MATERIALS : FILLER AND INNER SHEATH)	-	200	10% discount to BIS
6.1(MATERIALS : ARMGURING)	-	200	10% discount to BIS
7.1.1(OUTER SHEATH : For Cables with General Purpose InsuIafion)	-	200	10% discount to BIS
7.1.2(OUTER SHEATH : For Cables with Heat Resisting InsuIalion)	-	1000	10% discount to BIS
8.1(CONSTRUCTION : CONDUCTOR)	-	200	10% discount to BIS
8.2(CONSTRUCTION : CONDUCTOR)	-	200	10% discount to BIS
9.2(INSULATION : Thickness of Insulation)	-	500	10% discount to BIS
9.4(INSULATION : Application of Insulation)	-	200	10% discount to BIS
10.1(CORE IDENTIFICATION)	-	200	10% discount to BIS
10.2(CORE IDENTIFICATION)	-	200	10% discount to BIS
10.3(CORE IDENTIFICATION)	-	200	10% discount to BIS
10.3.1(Arrangement of Marking)	-	200	10% discount to BIS
11.1(LAYING UP OF CORES)	-	200	10% discount to BIS
12.1(INNER SHEATH)	-	500	10% discount to BIS
12.2(INNER SHEATH)	-	500	10% discount to BIS
12.3(INNER SHEATH :Thickness of Inner Sheath)	-	500	10% discount to BIS
13.1.1(ARMOURING : Application)	-	200	10% discount to BIS
13.1.3(ARMOURING : Direction of lay )	-	200	10% discount to BIS
13.2(ARMOURING : Type of Armour)	-	200	10% discount to BIS
13.3(Armouring : Dimensions -Wire Diameter)	-	500	10% discount to BIS
13.3(Armouring : Dimensions -Formed wire )	-	200	10% discount to BIS
13.4(ARMOURING : Joints)	-	200	10% discount to BIS
13.5.1(ARMOURING : Resistance)	-	1000	10% discount to BIS
13.5.2(ARMOURING : Resistance)	-	1000	10% discount to BIS
13.6 a)(ARMOURING: Tensile Strength)	-	1000	10% discount to BIS
13.6 b)(ARMOURING: Elongation )	-	1000	10% discount to BIS
13.6 c)(ARMOURING: Torsion Test (For round wire ) )	-	1000	10% discount to BIS
13.6 d)(ARMOURING: Winding Test(For formed wire))	-	1000	10% discount to BIS
13.6 e)(ARMOURING: Uniformity of zinc coating)	-	1500	10% discount to BIS
13.6 f)(ARMOURING: Mass of zinc coating )	-	1500	10% discount to BIS
13.6 g)(ARMOURING: Resistivity)	-	1000	10% discount to BIS
14.1(OUTER SHEATH)	-	200	10% discount to BIS
14.3(OUTER SHEATH : Colour )	-	200	10% discount to BIS
14.4.1(Thickness of Outer Sheath : Unarmowed Cables)	-	500	10% discount to BIS
14.4.2(Thickness of Outer Sheath : Armoured Cables)	-	500	10% discount to BIS
15.1 a) 1)(Tests on conductor : Annealing test ( for copper ))	-	1000	10% discount to BIS
15.1 a) 2)(Tensile test (for aluminium) - Before stranding )	-	1000	10% discount to BIS
15.1 a) 2)(Tensile test (for aluminium) - After stranding )	-	1000	10% discount to BIS
15.1 a) 3)(Tests on conductor : Wrapping test ( for aluminium ))	-	500	10% discount to BIS
15.1 a) 4)(Tests on conductor : Conductor resistance test)	-	1000	10% discount to BIS
15.1 a) 4)(Resistance test - Neutral conductor )	-	1000	10% discount to BIS
15.1 d)1)(Phyaical tests for insulation : Tensile Test)	-	1000	10% discount to BIS
15.1 d)1)(Phyaical tests for insulation : Elongation )	-	1000	10% discount to BIS
15.1 d)1)(Physical tests for sheath : Tensile stregth )	-	1000	10% discount to BIS
15.1 d)1)(Physical tests for sheath : Elongation )	-	1000	10% discount to BIS
15.1 d)2)(Phyaical tests for insulation- Ageing in air Oven : Tensile Test)	-	2000	10% discount to BIS
15.1 d)2)(Phyaical tests for insulation - Ageing in air oven : Elongation )	-	2000	10% discount to BIS
15.1 d)2)(Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-	2000	10% discount to BIS
15.1 d)2)(Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-	2000	10% discount to BIS
15.1 d)2)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-	2000	10% discount to BIS
15.1 d)2)(Physical tests for outer sheath -Ageing in air oven : Elongation )	-	2000	10% discount to BIS
15.1 d)2)(Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-	2000	10% discount to BIS
15.1 d)3)(Phyaical tests for insulation : Shrinkage )	-	1500	10% discount to BIS
15.1 d)3)(Phyaical tests for insulation : Shrinkage - Crack observed )	-	1500	10% discount to BIS
15.1 d)3)(Phyaical tests for Sheath : Shrinkage )	-	1500	10% discount to BIS
15.1 d)3)(Phyaical tests for Sheath : Shrinkage - Crack observed )	-	1500	10% discount to BIS
15.1 d)4)(Hot deformation : Insulation )	-	1500	10% discount to BIS
15.1 d)4)(Hot deformation : Sheath )	-	1500	10% discount to BIS
15.1 d)5)( Loss of mass in air oven- Insulation )	-	4000	10% discount to BIS
15.1 d)5)( Loss of mass in air oven- sheath )	-	4000	10% discount to BIS
15.1 d)6)(Heat shock test- Insulation )	-	1000	10% discount to BIS
15.1 d)6)(Heat shock test- sheath )	-	1000	10% discount to BIS
15.1 d)7)(Thermal stability- insulation )	-	2000	10% discount to BIS
15.1 d)7)(Thermal stability- Sheath )	-	2000	10% discount to BIS
15.1 f)(High voltage test ( water immersion test ))	-	5000	10% discount to BIS
15.4 a)(Cold bend test- Insulation ( Optional test))	-	1000	10% discount to BIS
15.4 a)(Cold bend test- Sheath ( Optional test))	-	1000	10% discount to BIS
15.4 b)(Cold impact test- Insulation ( Optional test))	-	1000	10% discount to BIS
15.4 b)(Cold impact test- Sheath ( Optional test))	-	1000	10% discount to BIS
15.4 c)(Armour resistance test ( for other than mining cables ).- Optional test )	-	1000	10% discount to BIS
16.4(Flammability Test)	-	2000	10% discount to BIS
17.1(IDENTIFICATION : Manufacturer’s Identification)	-	200	10% discount to BIS
17.2(IDENTIFICATION : Cable Identification)	-	200	10% discount to BIS
17.3(IDENTIFICATION : Cable Code)	-	200	10% discount to BIS
15.1 e)(Insulation resistance test : Volume Resistivity )	-	1500	10% discount to BIS
15.1 e)(Insulation resistance test : IR Constant )	-	1500	10% discount to BIS
16.5(Oxygen Index Test)	-	5000	10% discount to BIS
16.6(Flame Retardance Test on Single Cables)	-	4000	10% discount to BIS
16.7(Flame Retardance Test on Bunched Cables)	-	4000	10% discount to BIS
16.1(Temperature Index)	-	5000	10% discount to BIS
Cl No. 16.10(Smoke density test)	-	5000	10% discount to BIS
16.9(Test for Halogen Acid Gas Evolution)	-	4000	10% discount to BIS
Cl No. 16.10(Smoke density test)	-	5000	10% discount to BIS

04 Jan, 2027

-
Included w.e.f. 15.04.2024

11405

Conformity Testing Labs Pvt. Ltd. Unit 2 (A33)

8139626

IS 6721 (2023)

SANDAL AND SLIPPERS SPECIFICATION First revision

ALL

20000 View breakup
-

Clause No.	Exclusion	Remark
Cl. No.8.1, Table no. 1(i),a("Tear strength, (other than moulded upper material) ")	-	We offer the package price for BIS Sample only for mechanical test Rs. 20000/-.
Cl. No.8.1, Table no. 1(i),b("For all moulded upper material ")	-	We offer the package price for BIS Sample only for mechanical test Rs. 20000/-.
Cl. No.8.2,Table no. 2(i)(Tear strength)	-	We offer the package price for BIS Sample only for mechanical test Rs. 20000/-.
Cl. No.8.3,Table no. 3(i)(Tear strength)	-	We offer the package price for BIS Sample only for mechanical test Rs. 20000/-.
Cl. No.8.4,Table no. 4(iii)(Abrasion resistance)	-	We offer the package price for BIS Sample only for mechanical test Rs. 20000/-.
Cl. No.8.4,Table no. 5(ii)("Abrasion resistance, Volume loss ")	-	We offer the package price for BIS Sample only for mechanical test Rs. 20000/-.
Cl. No.8.5, Table no. 6(i)("Bond strength, N/mm, Min (Applicable when fore part is fully covered or strap width is more than 25 mm)")	-	We offer the package price for BIS Sample only for mechanical test Rs. 20000/-.
Cl. No.8.5, Table no. 6(ii)("Toe post attachment strength, N, Min (Applicable if toe post is present)")	-	We offer the package price for BIS Sample only for mechanical test Rs. 20000/-.
Cl. No.8.5, Table no. 6(iii)("Toe ring attachment strength, Min (Applicable if toe ring is not integral part of upper")	-	We offer the package price for BIS Sample only for mechanical test Rs. 20000/-.
Cl. No.8.5, Table no. 6(iv)(Strap to outsole strength)	-	We offer the package price for BIS Sample only for mechanical test Rs. 20000/-.
Cl. No.8.5, Table no. 6(v)("Attachment strength of back strap and Buckle/D-ring ")	-	We offer the package price for BIS Sample only for mechanical test Rs. 20000/-.
Cl. No.8.5, Table no. 6(vii)("Attachment strength of back strap and velcro, N, Min (If, present)")	-	We offer the package price for BIS Sample only for mechanical test Rs. 20000/-.
Cl. No.8.5, Table no. 6(x)("Inter layer bond strength, N/mm, (Applicable for multi-layer sole)")	-	We offer the package price for BIS Sample only for mechanical test Rs. 20000/-.
Cl. No.8.5, Table no. 6(xi)("Slip Resistance, Coefficient of Friction (COF) (Not applicable for leather sole) (To be carried out on quarry tiles)")	-	We offer the package price for BIS Sample only for mechanical test Rs. 20000/-.
Cl. No.8.6.2(Lead content)	-	We offer the package price for BIS Sample only for mechanical test Rs. 20000/-.
Cl. No.8.1, Table no. 1(ii)(Flexing endurance)	-	We offer the package price for BIS Sample only for mechanical test Rs. 20000/-.
Cl. No.8.2,Table no. 2(ii),a("Abrasion resistance- At dry condition")	-	We offer the package price for BIS Sample only for mechanical test Rs. 20000/-.
Cl. No.8.3,Table no. 3(ii),a("Abrasion resistance- At dry condition")	-	We offer the package price for BIS Sample only for mechanical test Rs. 20000/-.
Cl. No.8.3,Table no. 3(ii),b("Abrasion resistance- At wet condition")	-	We offer the package price for BIS Sample only for mechanical test Rs. 20000/-.
Cl. No.8.4,Table no. 4(i)(Grain crack index)	-	We offer the package price for BIS Sample only for mechanical test Rs. 20000/-.
Cl. No.8.4,Table no. 4(ii)(Density)	-	We offer the package price for BIS Sample only for mechanical test Rs. 20000/-.
Cl. No.8.4,Table no. 5(i)(Density)	-	We offer the package price for BIS Sample only for mechanical test Rs. 20000/-.
Cl. No.8.4, Table no. 5(iii)("Flexing resistance, At 30 000 flexes")	-	We offer the package price for BIS Sample only for mechanical test Rs. 20000/-.
Cl. No.8.5, Table no. 6(vi)("Attachment strength of elastic, limit of useful extension, percent")	-	We offer the package price for BIS Sample only for mechanical test Rs. 20000/-.
Cl. No.8.5, Table no. 6(viii)("Hydrolysis resistance, Cut growth after 150 000 flexes, mm, Max (Applicable for PU sole only)")	-	We offer the package price for BIS Sample only for mechanical test Rs. 20000/-.
Cl. No.8.5, Table no. 6(ix)("Heel pull off strength, N, Min (Applicable for heel height 40 mm and above attached separately to the sandal/slipper)")	-	We offer the package price for BIS Sample only for mechanical test Rs. 20000/-.
Cl. No.9.(MARKING AND PACKING)	-	We offer the package price for BIS Sample only for mechanical test Rs. 20000/-.
Cl. No.8.2,Table no. 2(ii),b("Abrasion resistance- At wet condition")	-	We offer the package price for BIS Sample only for mechanical test Rs. 20000/-.
Cl. No.5("SIZE AND FITTINGS ")	-	We offer the package price for BIS Sample only for mechanical test Rs. 20000/-.
Cl. No.7(MATERIAL)	-	We offer the package price for BIS Sample only for mechanical test Rs. 20000/-.
Cl. No.8.6.1,Table 1 of IS 17011(iv)(Chromium (VI))	-	We offer the package price for BIS Sample only for mechanical test Rs. 20000/-.
Cl. No.8.6.1,Table 1 of IS 17011(x)(pH)	-	We offer the package price for BIS Sample only for mechanical test Rs. 20000/-.
Cl. No.8.1, Table no. 1(i),a("Tear strength, (other than moulded upper material) ")	-	We offer the package price for BIS Sample only for mechanical test Rs. 20000/-.
Cl. No.8.1, Table no. 1(i),b("For all moulded upper material ")	-	We offer the package price for BIS Sample only for mechanical test Rs. 20000/-.
Cl. No.8.2,Table no. 2(i)(Tear strength)	-	We offer the package price for BIS Sample only for mechanical test Rs. 20000/-.
Cl. No.8.3,Table no. 3(i)(Tear strength)	-	We offer the package price for BIS Sample only for mechanical test Rs. 20000/-.
Cl. No.8.4,Table no. 4(iii)(Abrasion resistance)	-	We offer the package price for BIS Sample only for mechanical test Rs. 20000/-.
Cl. No.8.4,Table no. 5(ii)("Abrasion resistance, Volume loss ")	-	We offer the package price for BIS Sample only for mechanical test Rs. 20000/-.
Cl. No.8.5, Table no. 6(i)("Bond strength, N/mm, Min (Applicable when fore part is fully covered or strap width is more than 25 mm)")	-	We offer the package price for BIS Sample only for mechanical test Rs. 20000/-.
Cl. No.8.5, Table no. 6(ii)("Toe post attachment strength, N, Min (Applicable if toe post is present)")	-	We offer the package price for BIS Sample only for mechanical test Rs. 20000/-.
Cl. No.8.5, Table no. 6(iii)("Toe ring attachment strength, Min (Applicable if toe ring is not integral part of upper")	-	We offer the package price for BIS Sample only for mechanical test Rs. 20000/-.
Cl. No.8.5, Table no. 6(iv)(Strap to outsole strength)	-	We offer the package price for BIS Sample only for mechanical test Rs. 20000/-.
Cl. No.8.5, Table no. 6(v)("Attachment strength of back strap and Buckle/D-ring ")	-	We offer the package price for BIS Sample only for mechanical test Rs. 20000/-.
Cl. No.8.5, Table no. 6(vii)("Attachment strength of back strap and velcro, N, Min (If, present)")	-	We offer the package price for BIS Sample only for mechanical test Rs. 20000/-.
Cl. No.8.5, Table no. 6(x)("Inter layer bond strength, N/mm, (Applicable for multi-layer sole)")	-	We offer the package price for BIS Sample only for mechanical test Rs. 20000/-.
Cl. No.8.5, Table no. 6(xi)("Slip Resistance, Coefficient of Friction (COF) (Not applicable for leather sole) (To be carried out on quarry tiles)")	-	We offer the package price for BIS Sample only for mechanical test Rs. 20000/-.
Cl. No.8.6.2(Lead content)	-	We offer the package price for BIS Sample only for mechanical test Rs. 20000/-.
Cl. No.8.1, Table no. 1(ii)(Flexing endurance)	-	We offer the package price for BIS Sample only for mechanical test Rs. 20000/-.
Cl. No.8.2,Table no. 2(ii),a("Abrasion resistance- At dry condition")	-	We offer the package price for BIS Sample only for mechanical test Rs. 20000/-.
Cl. No.8.3,Table no. 3(ii),a("Abrasion resistance- At dry condition")	-	We offer the package price for BIS Sample only for mechanical test Rs. 20000/-.
Cl. No.8.3,Table no. 3(ii),b("Abrasion resistance- At wet condition")	-	We offer the package price for BIS Sample only for mechanical test Rs. 20000/-.
Cl. No.8.4,Table no. 4(i)(Grain crack index)	-	We offer the package price for BIS Sample only for mechanical test Rs. 20000/-.
Cl. No.8.4,Table no. 4(ii)(Density)	-	We offer the package price for BIS Sample only for mechanical test Rs. 20000/-.
Cl. No.8.4,Table no. 5(i)(Density)	-	We offer the package price for BIS Sample only for mechanical test Rs. 20000/-.
Cl. No.8.4, Table no. 5(iii)("Flexing resistance, At 30 000 flexes")	-	We offer the package price for BIS Sample only for mechanical test Rs. 20000/-.
Cl. No.8.5, Table no. 6(vi)("Attachment strength of elastic, limit of useful extension, percent")	-	We offer the package price for BIS Sample only for mechanical test Rs. 20000/-.
Cl. No.8.5, Table no. 6(viii)("Hydrolysis resistance, Cut growth after 150 000 flexes, mm, Max (Applicable for PU sole only)")	-	We offer the package price for BIS Sample only for mechanical test Rs. 20000/-.
Cl. No.8.5, Table no. 6(ix)("Heel pull off strength, N, Min (Applicable for heel height 40 mm and above attached separately to the sandal/slipper)")	-	We offer the package price for BIS Sample only for mechanical test Rs. 20000/-.
Cl. No.9.(MARKING AND PACKING)	-	We offer the package price for BIS Sample only for mechanical test Rs. 20000/-.
Cl. No.8.2,Table no. 2(ii),b("Abrasion resistance- At wet condition")	-	We offer the package price for BIS Sample only for mechanical test Rs. 20000/-.
Cl. No.5("SIZE AND FITTINGS ")	-	We offer the package price for BIS Sample only for mechanical test Rs. 20000/-.
Cl. No.7(MATERIAL)	-	We offer the package price for BIS Sample only for mechanical test Rs. 20000/-.
Cl. No.8.6.1,Table 1 of IS 17011(iv)(Chromium (VI))	-	We offer the package price for BIS Sample only for mechanical test Rs. 20000/-.
Cl. No.8.6.1,Table 1 of IS 17011(x)(pH)	-	We offer the package price for BIS Sample only for mechanical test Rs. 20000/-.
Cl. No.4(SHAPE AND DESIGN)	-	We offer the package price for BIS Sample only for mechanical test Rs. 20000/-.
Cl. No.6("CONSTRUCTION ")	-	We offer the package price for BIS Sample only for mechanical test Rs. 20000/-.

05 Apr, 2027

-
Exclusion: Cl. No.8.6.1,Table 1 of IS 17011(xii) (Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB)), Cl. No.8.6.1,Table 1 of IS 17011(i) (Allergenic and carcinogenic disperse dyes), Cl. No.8.6.1,Table 1 of IS 17011(ii) (Aromatic amines released from Azo dyes (each individual amine)), Cl. No.8.6.1,Table 1 of IS 17011(iii) (Aromatic amines released from Azo dyes (each individual amine)), Cl. No.8.6.1,Table 1 of IS 17011(v) (Dimethyl fumarate (DMFU)), Cl. No.8.6.1,Table 1 of IS 17011(vi) (Formaldehyde (free or released by partial hydrolysis)), Cl. No.8.6.1,Table 1 of IS 17011(vii) (Formaldehyde), Cl. No.8.6.1,Table 1 of IS 17011(viii) (Organotin compounds), Cl. No.8.6.1,Table 1 of IS 17011(ix) (PCP-TeCP-TriCP polychlorophenols), Cl. No.8.6.1,Table 1 of IS 17011(xi) (Phthalates (each individual phthalate)), Cl. No.8.6.1,Table 1 of IS 17011(xii) (Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))

11406

Conformity Testing Labs Pvt. Ltd. Unit 2 (A33)

8139626

IS 15844 : Part 2 (2023)

SPORTS FOOTWEAR PART -2 PERFORMANCE SPORTS FOOTWEAR

ALL

45000 View breakup
-

Clause No.	Exclusion	Remark
7.1.1(Whole Footwear)	-	We offer the package price for BIS Sample only for mechanical test Rs. 45000/-.
7.1.2(Upper to Mid Sole/Out Sole Bond Performance)	-	We offer the package price for BIS Sample only for mechanical test Rs. 45000/-.
7.1.3("Upper to Composite Sole Bond Performance (Applicable Only When the Sole is Composite)")	-	We offer the package price for BIS Sample only for mechanical test Rs. 45000/-.
7.1.4(Out Sole to Mid Sole (Multilayer) Bond Performance)	-	We offer the package price for BIS Sample only for mechanical test Rs. 45000/-.
7.1.5(Energy Absorption at Seat Region)	-	We offer the package price for BIS Sample only for mechanical test Rs. 45000/-.
7.1.8(Slip Resistance)	-	We offer the package price for BIS Sample only for mechanical test Rs. 45000/-.
7.1.9(Heel Drop)	-	We offer the package price for BIS Sample only for mechanical test Rs. 45000/-.
7.2 , Table No. 2 , i)(Flexing resistance)	-	We offer the package price for BIS Sample only for mechanical test Rs. 45000/-.
7.2 , Table No. 2 , iv) ,a)(Water vapour permeability)	-	We offer the package price for BIS Sample only for mechanical test Rs. 45000/-.
7.2 , Table No. 2 , v)(Stitch tear strength (double hole))	-	We offer the package price for BIS Sample only for mechanical test Rs. 45000/-.
7.2 , Table No. 2 , vii)(Tensile strength)	-	We offer the package price for BIS Sample only for mechanical test Rs. 45000/-.
7.2 , Table No. 3 , ii)(Elongation at break)	-	We offer the package price for BIS Sample only for mechanical test Rs. 45000/-.
7.2 , Table No. 2 , iii)("Colour fastness rubbing (To and fro) Grey scale rate Dry: (rubbing) Rating: (Marring and staining) ")	-	We offer the package price for BIS Sample only for mechanical test Rs. 45000/-.
7.2 , Table No. 2 , ix)("Water penetration and water absorption after 60 Minutes Water absorption %, Max Water penetration Gms, Max")	-	We offer the package price for BIS Sample only for mechanical test Rs. 45000/-.
7.2 , Table No. 2 , x)(Abrasion test (for unlined upper))	-	We offer the package price for BIS Sample only for mechanical test Rs. 45000/-.
7.2 , Table No. 3 , i)(Breaking strength "As per Method 1 of IS 7016 (Part 2)/ ISO 1421 : 2016 or ISO 17706")	-	We offer the package price for BIS Sample only for mechanical test Rs. 45000/-.
7.2 , Table No. 3 , iii)(Tear strength, N, Min For Fabric: For all other materials)	-	We offer the package price for BIS Sample only for mechanical test Rs. 45000/-.
7.2 , Table No. 3 , vi) , a)(Water vapour permeability,)	-	-
7.2 , Table No. 3 , vii)(Hydrolysis resistance)	-	We offer the package price for BIS Sample only for mechanical test Rs. 45000/-.
7.3 , Table No. 4 , i)(Tear strength,)	-	We offer the package price for BIS Sample only for mechanical test Rs. 45000/-.
7.3 , Table No. 4 , ii)(Abrasion resistance, cycles)	-	We offer the package price for BIS Sample only for mechanical test Rs. 45000/-.
7.4 , Table No. 5 , i)(Thickness)	-	We offer the package price for BIS Sample only for mechanical test Rs. 45000/-.
7.4 , Table No. 5 , ii)(Flexing index)	-	We offer the package price for BIS Sample only for mechanical test Rs. 45000/-.
7.4 , Table No. 5 , iii)(Abrasion resistance, at 400 cycles)	-	We offer the package price for BIS Sample only for mechanical test Rs. 45000/-.
7.4 , Table No. 5 , iv) , a)(Water Absorption,)	-	We offer the package price for BIS Sample only for mechanical test Rs. 45000/-.
7.5 , Table No. 6 , i)(Thickness)	-	We offer the package price for BIS Sample only for mechanical test Rs. 45000/-.
7.5 , Table No. 6 , ii)(Abrasion resistance, cycles As per IS 15298 (Part 1))	-	We offer the package price for BIS Sample only for mechanical test Rs. 45000/-.
7.5 , Table No. 6 , iii) , a)(Water Absorption)	-	We offer the package price for BIS Sample only for mechanical test Rs. 45000/-.
7.5 , Table No. 6 , iv)(Heat resistance shrinkage linear)	-	We offer the package price for BIS Sample only for mechanical test Rs. 45000/-.
7.6 , Table No. 7 , i)(Abrasion resistance (volume loss))	-	We offer the package price for BIS Sample only for mechanical test Rs. 45000/-.
7.6 , Table No. 7 , ii)(Flexing resistance)	-	We offer the package price for BIS Sample only for mechanical test Rs. 45000/-.
7.6 , Table No. 7 , iii)(Hydrolysis resistance, cut growth after 1 50 000 flexes)	-	We offer the package price for BIS Sample only for mechanical test Rs. 45000/-.
7.6 , Table No. 7 , iv)(Tear strength)	-	We offer the package price for BIS Sample only for mechanical test Rs. 45000/-.
7.6 , Table No. 7 , v)(Tensile strength)	-	We offer the package price for BIS Sample only for mechanical test Rs. 45000/-.
7.6 , Table No. 7 , vi)(Elongation at break)	-	We offer the package price for BIS Sample only for mechanical test Rs. 45000/-.
7.6 , Table No. 7 , vii)(Compression set)	-	We offer the package price for BIS Sample only for mechanical test Rs. 45000/-.
7.7 , Table No. 8 , i)(Compression set)	-	We offer the package price for BIS Sample only for mechanical test Rs. 45000/-.
7.7 , Table No. 8 , ii)(Split tear strength,)	-	We offer the package price for BIS Sample only for mechanical test Rs. 45000/-.
7.7 , Table No. 8 , iii)(Heat shrinkage,)	-	We offer the package price for BIS Sample only for mechanical test Rs. 45000/-.
7.7 , Table No. 8 , iv)(Elongation at break,)	-	We offer the package price for BIS Sample only for mechanical test Rs. 45000/-.
7.8 , Table No. 9 , i)(First dry collapsing load, hardness)	-	We offer the package price for BIS Sample only for mechanical test Rs. 45000/-.
7.8 , Table No. 9 , iii)(Moisture resistance)	-	We offer the package price for BIS Sample only for mechanical test Rs. 45000/-.
7.8 , Table No. 9 , iv) , a)(Initial dry area shape retention)	-	We offer the package price for BIS Sample only for mechanical test Rs. 45000/-.
7.8 , Table No. 9 , iv) , b)(Area shape retention after 10th collapse, dry)	-	We offer the package price for BIS Sample only for mechanical test Rs. 45000/-.
7.8 , Table No. 9 , v)(Peel strength)	-	We offer the package price for BIS Sample only for mechanical test Rs. 45000/-.
7.9 , Table No. 10 , i)(Peel strength)	-	We offer the package price for BIS Sample only for mechanical test Rs. 45000/-.
7.9 , Table No. 10 , ii)(Shear strength)	-	We offer the package price for BIS Sample only for mechanical test Rs. 45000/-.
7.11 , Table No. 12 , i)(Breaking strength of lace,)	-	We offer the package price for BIS Sample only for mechanical test Rs. 45000/-.
7.11 , Table No. 12 , ii)(Lace tag strength,)	-	We offer the package price for BIS Sample only for mechanical test Rs. 45000/-.
7.11 , Table No. 12 , iii)(Lace to lace abrasion,)	-	We offer the package price for BIS Sample only for mechanical test Rs. 45000/-.
7.11 , Table No. 12 , v)(Strength of Buckle/Ski hook)	-	We offer the package price for BIS Sample only for mechanical test Rs. 45000/-.
4(SAMPLING AND CONDITIONING)	-	We offer the package price for BIS Sample only for mechanical test Rs. 45000/-.
5(DESIGN)	-	We offer the package price for BIS Sample only for mechanical test Rs. 45000/-.
6(SIZE AND FITTINGS)	-	We offer the package price for BIS Sample only for mechanical test Rs. 45000/-.
7.1.6(Complete Shoe Flexing)	-	We offer the package price for BIS Sample only for mechanical test Rs. 45000/-.
7.1.7(Washability)	-	We offer the package price for BIS Sample only for mechanical test Rs. 45000/-.
7.2 , Table No. 3 , vi) , b)("Water vapour coefficient, ")	-	We offer the package price for BIS Sample only for mechanical test Rs. 45000/-.
7.2 , Table No. 2 , ii)(Tear strength (average force))	-	We offer the package price for BIS Sample only for mechanical test Rs. 45000/-.
7.2 , Table No. 2 , iv) ,b)(Water vapour coefficient)	-	We offer the package price for BIS Sample only for mechanical test Rs. 45000/-.
7.2 , Table No. 2 , vi)("Colour fastness to light (Optional) Grey scale rate, Rating: (Marring)")	-	We offer the package price for BIS Sample only for mechanical test Rs. 45000/-.
7.2 , Table No. 2 , viii)(Elongation at break,)	-	We offer the package price for BIS Sample only for mechanical test Rs. 45000/-.
7.2 , Table No. 3 , v)("Flexing resistance, no crack/damage to coating/ lamination / upper material till prescribed cycles")	-	We offer the package price for BIS Sample only for mechanical test Rs. 45000/-.
7.2 , Table No. 3 , viii)(Colour fastness to light grey scale rate)	-	We offer the package price for BIS Sample only for mechanical test Rs. 45000/-.
7.3 , Table No. 4 , iii)("Colour fastness to rubbing (crocking), Grey scale rate with 10 rubs on dry or wet, ")	-	We offer the package price for BIS Sample only for mechanical test Rs. 45000/-.
7.3 , Table No. 4 , v) , a)(Water vapour permeability,)	-	We offer the package price for BIS Sample only for mechanical test Rs. 45000/-.
7.3 , Table No. 4 , v) , b)("Water vapour coefficient, " As per IS 15298 (Part 1))	-	We offer the package price for BIS Sample only for mechanical test Rs. 45000/-.
7.4 , Table No. 5 , iv) , b)(Water Desorption)	-	We offer the package price for BIS Sample only for mechanical test Rs. 45000/-.
7.5 , Table No. 6 , iii) , b)(Water Desorption)	-	We offer the package price for BIS Sample only for mechanical test Rs. 45000/-.
7.8 , Table No. 9 , ii)(Resilience)	-	We offer the package price for BIS Sample only for mechanical test Rs. 45000/-.
7.11 , Table No. 12 , vi)(Corrosion resistance)	-	We offer the package price for BIS Sample only for mechanical test Rs. 45000/-.
7.10 , Table No. 11 , i)(Limit of useful extension,)	-	We offer the package price for BIS Sample only for mechanical test Rs. 45000/-.
7.10 , Table No. 11 , ii)(Needle strength,)	-	We offer the package price for BIS Sample only for mechanical test Rs. 45000/-.
7.11 , Table No. 12 , iv)("Colour fastness to water Gray Scale Rate")	-	We offer the package price for BIS Sample only for mechanical test Rs. 45000/-.
7.2 , Table No. 3 , ix)(Bursting Strength,)	-	We offer the package price for BIS Sample only for mechanical test Rs. 45000/-.
7.2 , Table No. 3 , iv)(Strength at needle perforation)	-	We offer the package price for BIS Sample only for mechanical test Rs. 45000/-.
8(MARKING AND PACKING)	-	We offer the package price for BIS Sample only for mechanical test Rs. 45000/-.
7.12, Table no. 1 of IS 17011,(iv)(Chromium (VI))	-	We offer the package price for BIS Sample only for mechanical test Rs. 45000/-.
7.12, Table no. 1 of IS 17011,(x)(pH)	-	We offer the package price for BIS Sample only for mechanical test Rs. 45000/-.

05 Apr, 2027

-
Exclusion: Cl.7.12, Table no. 1 of IS 17011,(i) (Allergenic and carcinogenic disperse dyes), Cl.7.12, Table no. 1 of IS 17011,(ii) (Aromatic amines released from Azo dyes (each individual amine)), Cl.7.12, Table no. 1 of IS 17011,(iii) (Aromatic amines released from Azo dyes (each individual amine)), Cl.7.12, Table no. 1 of IS 17011,(v) (Dimethyl fumarate (DMFU)), Cl.7.12, Table no. 1 of IS 17011,(vi) (Formaldehyde (free or released by partial hydrolysis)), Cl.7.12, Table no. 1 of IS 17011,(vii) (Formaldehyde), Cl.7.12, Table no. 1 of IS 17011,(viii) (Organotin compounds), Cl.7.12, Table no. 1 of IS 17011,(ix) (PCP-TeCP-TriCP polychlorophenols), Cl.7.12, Table no. 1 of IS 17011,(xi) (Phthalates (each individual phthalate)), Cl.7.12, Table no. 1 of IS 17011,(xii) (Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB)), Cl.7.1.7 (washability)

11407

Applications Research and Development Centre, Haldia Petrochemicals Limited, Kolkata

5174906

IS 7328 (2020)

Specification for Polyethylene Material for Moulding and Extrusion ( Third Revision )

Polyethylene and Polypropylene

31800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2.1.2(MFI)	-	1500	The testing charge is in INR and for one sample. The testing charge may be revised as decided by the laboratory management.
5.2.1.1(Density)	-	1500	The testing charge is in INR and for one sample. The testing charge may be revised as decided by the laboratory management.
5.3.2 Table 6 IS 13360 (Part 5/Sec1)(Tensile strength at yield)	-	2000	The testing charge is in INR and for one sample. The testing charge may be revised as decided by the laboratory management.
5.3.2 Table 6 IS 13360 (Part 5/Sec1)(Elongation at yield)	-	2000	The testing charge is in INR and for one sample. The testing charge may be revised as decided by the laboratory management.
5.3.2 Table 6 IS 13360 (Part 5/Sec1)(Tensile strength at break)	-	2000	The testing charge is in INR and for one sample. The testing charge may be revised as decided by the laboratory management.
5.3.2 Table 6 IS 13360 (Part 5/Sec1)(Elongation at break)	-	2000	The testing charge is in INR and for one sample. The testing charge may be revised as decided by the laboratory management.
5.3.2 Table 6 IS 13360 (Part 5/Sec7)(Flexural modulas)	-	2000	The testing charge is in INR and for one sample. The testing charge may be revised as decided by the laboratory management.
5.3.2 Table 6 IS 13360 (Part 5/Sec4)(Izod/Charpy impact strength)	-	2000	The testing charge is in INR and for one sample. The testing charge may be revised as decided by the laboratory management.
IS 13360(part 9/Sec9)/ASTME313(Yellowness index or whiteness index)	-	1200	The testing charge is in INR and for one sample. The testing charge may be revised as decided by the laboratory management.
IS 13360(part 9/Sec5)(Haze or luminious transmittance)	-	1000	The testing charge is in INR and for one sample. The testing charge may be revised as decided by the laboratory management.
Annex B of IS 4984 5.3.2 Table6(Oxidation induction time)	-	5000	The testing charge is in INR and for one sample. The testing charge may be revised as decided by the laboratory management.
5.3.2-Table 6-2(a)(Heat deflection temperature of IS 13360 (Part 6/ Sec 3) and IS 13360 (Part 6/ Sec 17))	-	2000	The testing charge is in INR and for one sample. The testing charge may be revised as decided by the laboratory management.
5.3.2 Table 6 IS 13360 (Part 6/Sec1)(Vicat softening temperature)	-	2000	The testing charge is in INR and for one sample. The testing charge may be revised as decided by the laboratory management.

30 Nov, 2026

-
Exclusion: Cl.5.3.2 (Tear Strength, Dart Impact Strength, Sore D Hardness, Coefficient of Friction, Brittleness Temperature, Surface Resistivity, Volume Resistivity, Dissipation Factor, Relative permittivity, Water absorption, Volatile Content, Gas Permeability, Oxygen Gas Transmission Rate, Water Vapour Transmission Rate, Oven Aging, Natural / artificial Weathering, Specular Gloss, Transparency, Colour fastness to Daylight, Colour Bleeding, Dielectric Strength

11408

Conformity Testing Labs Pvt. Ltd. Unit 2 (A33)

8139626

IS 10702 (2023)

Hawai Chappal-Specification

ALL

20000 View breakup
-

Clause No.	Exclusion	Remark
4.1(Material)	-	We offer the package price for BIS Sample only for mechanical test Rs. 20000/-.
4.2(Length)	-	We offer the package price for BIS Sample only for mechanical test Rs. 20000/-.
4.3(Thickness)	-	We offer the package price for BIS Sample only for mechanical test Rs. 20000/-.
4.4 , Table No. 1 , i)(Density)	-	We offer the package price for BIS Sample only for mechanical test Rs. 20000/-.
4.4 , Table No. 1 , ii)(2Compression set at constant stress)	-	We offer the package price for BIS Sample only for mechanical test Rs. 20000/-.
4.4 , Table No. 1 , iii)(3Split tear strength)	-	We offer the package price for BIS Sample only for mechanical test Rs. 20000/-.
4.4 , Table No. 1 , iv)("Shrinkage at 50 ºC ± 1 ºC for 24 h for polymeric material, Shrinkage at 100 ºC ± 1 ºC for 1 h for rubber")	-	We offer the package price for BIS Sample only for mechanical test Rs. 20000/-.
4.4 , Table No. 1 , v)(5Abrasion resistance at applied force)	-	We offer the package price for BIS Sample only for mechanical test Rs. 20000/-.
4.4 , Table No. 1 , vi)(Flexing resistance: Maximum cut growth at 50 000 flexes)	-	We offer the package price for BIS Sample only for mechanical test Rs. 20000/-.
4.4 , Table No. 1 , vii)(7 Hydrolysis resistance, Maximum cut growth at 50 000 flexes)	-	We offer the package price for BIS Sample only for mechanical test Rs. 20000/-.
4.4 , Table No . 2 , i)(Density , Solid strap, Cellular strap)	-	We offer the package price for BIS Sample only for mechanical test Rs. 20000/-.
4.4 , Table No . 2 , ii)("Breaking strength , Strap to strap and Toe portion to strap , Elongation at break")	-	We offer the package price for BIS Sample only for mechanical test Rs. 20000/-.
4.4 , Table No . 2 , iii)(Minimum cross section of the stud)	-	We offer the package price for BIS Sample only for mechanical test Rs. 20000/-.
4.4 , Table No . 2 , iv)(Stud bolt)	-	We offer the package price for BIS Sample only for mechanical test Rs. 20000/-.
4.4 , Table No . 3 , i)(Toe post attachment strength)	-	We offer the package price for BIS Sample only for mechanical test Rs. 20000/-.
4.4 , Table No . 3 , ii)(Attachment strength of rear strap)	-	We offer the package price for BIS Sample only for mechanical test Rs. 20000/-.
4.4 , Table No . 3 , iii)(Inter layer bond strength)	-	We offer the package price for BIS Sample only for mechanical test Rs. 20000/-.
6(MARKING AND PACKING)	-	We offer the package price for BIS Sample only for mechanical test Rs. 20000/-.
Cl. No.5.1,Table no.1 of IS 17011(iv)(Chromium (VI))	-	We offer the package price for BIS Sample only for mechanical test Rs. 20000/-.
Cl. No.5.1,Table no.1 of IS 17011(x)(pH)	-	We offer the package price for BIS Sample only for mechanical test Rs. 20000/-.
Cl.No. 5.2(lead content)	-	We offer the package price for BIS Sample only for mechanical test Rs. 20000/-.

05 Apr, 2027

-
Included w.e.f. 01.11.2023. Exclusion: Cl. No.5.1,Table no.1 of IS 17011(i) (Allergenic and carcinogenic disperse dyes), Cl. No.5.1,Table no.1 of IS 17011(ii) (Aromatic amines released from Azo dyes (each individual amine)), Cl. No.5.1,Table no.1 of IS 17011(iii) (Aromatic amines released from Azo dyes (each individual amine)), Cl. No.5.1,Table no.1 of IS 17011(v) (Dimethyl fumarate (DMFU)), Cl. No.5.1,Table no.1 of IS 17011(vi) (Formaldehyde (free or released by partial hydrolysis)), Cl. No.5.1,Table no.1 of IS 17011(vii) (Formaldehyde), Cl. No.5.1,Table no.1 of IS 17011(viii) (Organotin compounds), Cl. No.5.1,Table no.1 of IS 17011(ix) (PCP-TeCP-TriCP polychlorophenols), Cl. No.5.1,Table no.1 of IS 17011(xi) (Phthalates (each individual phthalate)), Cl. No.5.1,Table no.1 of IS 17011(xii) (Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))

11409

GLOBAL COMPLIANCE LABORATORY INDIA, GHAZIABAD

5172706

IS 16333 : Part 3 (2022)

Mobile phone handsets: Part 3 Indian language support for mobile phone handsets - Specific requirements(Second Revision)

class 3

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Inputting of text)	-	5000	-
5.2(Message Readability)	-	5000	-
5.1(Inputting of text)	-	5000	-
5.2(Message Readability)	-	5000	-
5.1(Inputting of text)	-	5000	-
5.2(Message Readability)	-	5000	-
5.1(Inputting of text)	-	5000	-
5.2(Message Readability)	-	5000	-
5.1(Inputting of text)	-	5000	-
5.2(Message Readability)	-	5000	-
6(Marking)	-	5000	-
5.1(Inputting of text)	-	5000	-
5.2(Message Readability)	-	5000	-
6(Marking)	-	5000	-
5.1(Inputting of text)	-	5000	-
5.2(Message Readability)	-	5000	-
6(Marking)	-	5000	-
5.1(Inputting of text)	-	5000	-
5.2(Message Readability)	-	5000	-
6(Marking)	-	5000	-
5.1(Inputting of text)	-	5000	-
5.2(Message Readability)	-	5000	-
6(Marking)	-	5000	-
5.1(Inputting of text)	-	5000	-
5.2(Message Readability)	-	5000	-
6(Marking)	-	5000	-

20 Jun, 2026

-
Included w.e.f. 19.09.2023

11410

Spectro Analytical Labs Private Limited, Gautam Buddha Nagar

8130426

IS 7098 : Part 1 (1988)

Specification for crosslinked polyethylene insulated pvc sheathed cables: Part 1 for working voltages up to and including 1100 volts (First Revision)

XLPE ,FR, FR-LSH, ST2,Class:1, 2, Category -01, C1 & C2

69225 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
16.2(HIGH VOLTAGE TEST )	-	2000	10% discount to BIS
3(CONDUCTOR: MATERIALS)	-	200	10% discount to BIS
4(INSULATION : MATERIALS)	-	200	10% discount to BIS
5.1(FILLER AND INNER SHEATH)	-	200	10% discount to BIS
6(ARMOURING)	-	200	10% discount to BIS
7(OUTER SHEATH)	-	200	10% discount to BIS
8.1(CONDUCTOR: CONSTRUCTION)	-	200	10% discount to BIS
8.2(PROTECTIVE BARRIER)	-	200	10% discount to BIS
8.3(SIZE OF NEUTRAL CONDUCTOR)	-	200	10% discount to BIS
9.1(Insulation Applied by extrusicn)	-	200	10% discount to BIS
9.4(Application of Insulation)	-	200	10% discount to BIS
9.2(Thickness of Insulation - Average)	-	500	10% discount to BIS
9.3(Thickness of Insulation - Minimum)	-	500	10% discount to BIS
10.1(Core Identification)	-	200	10% discount to BIS
10.2(Core Identification- Neutral)	-	200	10% discount to BIS
10.3(Core Identification by number )	-	200	10% discount to BIS
10.4(Core Identification by number - Neutral )	-	200	10% discount to BIS
11(LAVING UP OF CORES)	-	200	10% discount to BIS
12.1 & 12.2(Inner sheath : Application)	-	200	10% discount to BIS
12.3(Thickness of Inner Sheath)	-	500	10% discount to BIS
13.1(Armouring: Application)	-	200	10% discount to BIS
15.1 a) ii)(Tensile test (for aluminium) - Before stranding )	-	1000	10% discount to BIS
15.1 a) ii)(Tensile test (for aluminium) - After stranding )	-	1000	10% discount to BIS
15.1 a) iii)(Wrapping test (for aluminium))	-	1000	10% discount to BIS
15.1 a) iv)(Resistance test - Main conductor)	-	1000	10% discount to BIS
13.3(Armouring : Dimensions -Wire Diameter)	-	1000	10% discount to BIS
13.3(Armouring : Dimensions -Formed wire )	-	1000	10% discount to BIS
15.1 d) i) (Phyaical tests for insulation : Tensile Test)	-	500	10% discount to BIS
15.1 a) iv)(Resistance test - Neutral conductor)	-	1000	10% discount to BIS
15.1 d) i) (Phyaical tests for insulation : Elongation)	-	500	10% discount to BIS
15.1 d) ii) (Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-	2000	10% discount to BIS
15.1 d) ii) (Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-	2000	10% discount to BIS
15.1 d) iii) (Phyaical tests for insulation : Hot set )	-	2000	10% discount to BIS
15.1 d) iv) (Phyaical tests for insulation : Shrinkage )	-	1500	10% discount to BIS
15.1 e) iv) (Phyaical tests for Sheath : Shrinkage - Crack observed )	-	1500	10% discount to BIS
15.1 d) v) (Insulation: Waterabsorption(gravimetric))	-	5000	10% discount to BIS
15.1 e) i) (Physical tests for outer sheath : Tensile stregth)	-	500	10% discount to BIS
15.1 e) i) (Physical tests for outer sheath : Elongation)	-	500	10% discount to BIS
15.1 e) ii) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-	2000	10% discount to BIS
15.1 d) iii) (Phyaical tests for insulation : Permanent set )	-	500	10% discount to BIS
5.2(FILLER AND INNER SHEATH)	-	500	10% discount to BIS
14.1(Outer Sheath : Application)	-	500	10% discount to BIS
14.2(Colour of outer sheath)	-	200	10% discount to BIS
14.3(Thickness of outer sheath - AVERAGE)	-	500	10% discount to BIS
14.3(Thickness of outer sheath - minimum)	-	500	10% discount to BIS
15.1 a) i)(Annealing Test ( For copper wire ) )	-	1000	10% discount to BIS
15.1 e) ii) (Physical tests for outer sheath -Ageing in air oven : Elongation )	-	2000	10% discount to BIS
15.1 e) ii) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation )	-	2000	10% discount to BIS
15.1 e) ii) (Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-	2000	10% discount to BIS
15.1 e) iii) (Sheath: Loss of mass in air oven)	-	4000	10% discount to BIS
15.1 e) vi) (Sheath : Heat shock test)	-	1000	10% discount to BIS
15.1 e) v) (Sheath : Hot deformation)	-	1500	10% discount to BIS
15.1 e) vii) (Sheath : Thermalstability)	-	3000	10% discount to BIS
15.1 f)(INSULATION RESISTANCE TEST : Volume resistivity )	-	2000	10% discount to BIS
16.3(FLAMMABILITY TEST : Period of Burning )	-	2000	10% discount to BIS
16.3(FLAMMABILITY TEST : Unaffected length )	-	2000	10% discount to BIS
17.1(Manufacturer'. identification)	-	200	10% discount to BIS
17.2(cable Indentification )	-	200	10% discount to BIS
13.1.3(Armouring: Direction of Lay )	-	500	10% discount to BIS
13.2(Type of armour )	-	200	10% discount to BIS
13.4(Armour: Joint)	-	200	10% discount to BIS
13.6 a)(ARMOURING: Tensile Strength)	-	1000	10% discount to BIS
13.6 b)(ARMOURING: Elongation )	-	1000	10% discount to BIS
13.6 c)(ARMOURING: Torsion Test (For round wire ) )	-	1000	10% discount to BIS
13.6 d)(ARMOURING: Winding Test(For formed wire))	-	1000	10% discount to BIS
13.6 e)(ARMOURING: Uniformity of zinc coating)	-	1500	10% discount to BIS
13.6 f)(ARMOURING: Mass of zinc coating )	-	1500	10% discount to BIS
13.6 g)(ARMOURING: Resistivity)	-	1500	10% discount to BIS
13.5(Armouring : Resistance Test)	-	1500	10% discount to BIS
13.1.2(Armouring: Coverage )	-	500	10% discount to BIS
15.4 (a)(Cold bend)	-	1000	10% discount to BIS
15.4 (b)(Cold impact)	-	1000	10% discount to BIS
16.9(Oxygen Index Test)	-	5000	10% discount to BIS
16.1(Flame Retardance Test on Single Cables)	-	5000	10% discount to BIS
16.11(Flame Retardance Test on Bunched Cables)	-	5000	10% discount to BIS
Cl No. 16.15(Smoke density test)	-	5000	10% discount to BIS
16.13(Test for Halogen Acid Gas Evolution)	-	4000	10% discount to BIS
16.14(Temperature Index)	-	5500	10% discount to BIS

04 Jan, 2027

-
Included w.e.f. 15.04.2024

11411

IDMA LABORATORIES LIMITED, PANCHKULA

9123236

IS 10931 (2023)

Lauric Acid - Specification (first revision of IS 10931)

17500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Description)	-	500	-
4.2 Table 1 (i)(Moisture)	-	1000	-
4.2 Table 1 (ii)(Saponification value)	-	1500	-
4.2 Table 1 (iii)(Acid value differ from Saponification value)	-	1500	-
4.2 Table 1 (iv)(Iodine value)	-	1500	-
4.2 Table 1 (v)(Unsaponifiable matter)	-	1500	-
4.2 Table 1 (vi)(Titre)	-	1500	-
4.2 Table 1 (vii)(Colour, 51/4 inch cell, Y + 5R)	-	1500	-
4.3 Table 2 (i)(C8:0 + C10 : 0)	-	7000	Total testing charges for Fatty acid composition are Rs. 7000/-
4.3 Table 2 (ii)(C12 : 0)	-	0	Total testing charges for Fatty acid composition are Rs. 7000/-
4.3 Table 2 (i)(C14 : 0 + C16 : 0)	-	0	Total testing charges for Fatty acid composition are Rs. 7000/-
4.3 Table 3 (i)(C8 : 0 + C10 : 0)	-	0	Total testing charges for Fatty acid composition are Rs. 7000/-
4.3 Table 3 (ii)(C12 : 0)	-	0	Total testing charges for Fatty acid composition are Rs. 7000/-
4.3 Table 3 (iii)(C14 : 0)	-	0	Total testing charges for Fatty acid composition are Rs. 7000/-
4.3 Table 2 (iv)(C16 : 0)	-	0	Total testing charges for Fatty acid composition are Rs. 7000/-
4.3 Table 2 (v)(Others)	-	0	Total testing charges for Fatty acid composition are Rs. 7000/-

31 Dec, 2026

-
Included w.e.f. 09.02.2024 For complete range with all types/grades/varietes

11412

Planet Electro Labs Private Limited (407)

8174226

IS 10322 : Part 5 : Sec 9 (2017)

Luminaires: Part 5 particular requirements: Sec 9 rope lights

42000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
21.6(Marking)	-	1000	-
21.7(Construction)	-	5000	-
21.8(Creepage Distance and Clearances)	-	2000	-
21.10(Terminals)	-	2000	-
21.11(External & Internal Wiring)	-	6000	-
21.12(Protection against electric shock)	-	8000	-
21.13(Endurance Tests and Thermal Tests)	-	4000	-
21.14(Resistance to Dust & Moisture)	-	8000	-
21.15(Insulation Resistance and Electric Strength)	-	2000	-
21.16(Resistance to Heat , fire and tracking)	-	4000	-

-
Exclusion: Cl.21.7.4 & 6.14.2 of Annex-A (Electrical endurance), Cl.21.7.4 & 6.14.3 of Annex-A, (Bending (Non-rewirable connector))

11413

Planet Electro Labs Private Limited (407)

8174226

IS 16103 : Part 1 (2012)

Led modules for general lighting: Part 1 safety requirements

33000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	1000	-
8(Terminals)	-	2000	-
9(PROVISION FOR EARTHING)	-	2000	-
11(Mositure Resistance and Insulation)	-	8000	-
12(Electric Strength)	-	2000	-
13(Fault conditions)	-	5000	-
15(Construction)	-	2000	-
16(Creepage distance and clearances)	-	2000	-
18(Resistance to heat, fire and tracking)	-	4000	-
19(Resistance to corrosion)	-	1000	-
21(Heat management)	-	0	-
10(Protection against accidental contact with live parts)	-	2000	-
17(Screws, current carrying parts and connections)	-	2000	-

-
-

11414

Planet Electro Labs Private Limited (407)

8174226

IS 10322 : Part 5 : Sec 7 (2017)

Luminaires: Part 5 particular requirements: Sec 7 lighting chains (First Revision)

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
20.6(Marking)	-	1000	-
20.7(Construction)	-	5000	-
20.8(Creepage Distance and Clearances)	-	1000	-
20.10(Terminals)	-	2000	-
20.11(External & Internal Wiring)	-	6000	-
20.12(Protection against electric shock)	-	8000	-
20.13(Endurance Tests and Thermal Tests)	-	6000	-
20.14(Resistance to Dust & Moisture)	-	2000	-
20.15(Insulation Resistance and Electric Strength)	-	7000	-
20.16(Resistance to Heat , fire and tracking)	-	7000	-

-
Exclusion: Cl.20.7.4 & Cl.6.14.2 of Annex A (Electrical endurance (CBC)), Cl.20.7.4 & Cl.6.14.3 of Annex A (Bendings (Nonrewireable connectors))

11415

Planet Electro Labs Private Limited (407)

8174226

IS 16102 : Part 1 (2012)

Self - Ballasted led lamps for general lighting services: Part 1 safety requirements

31000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking)	-	1000	-
6(Interchangeability)	-	3000	-
7(Protection against accidental contact with live parts)	-	2000	-
8(Insulation Resistance and Electric Strength)	-	10000	-
9(MECHANICAL STRENGTH)	-	2000	-
10(cap temperature)	-	5000	-
11(Resistance to Heat)	-	2000	-
12(Resistance to Flame and Ignition)	-	6000	-
14(Creepage distance and clearances)	-	2000	-
13(Fault conditions)	-	5000	-

-
-

11416

Planet Electro Labs Private Limited (407)

8174226

IS 10322 : Part 5 : Sec 6 (2013)

Luminaires: Part 5 particular requirements: Sec 6 handlamps

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Marking)	-	1000	-
7.0(Construction)	-	4000	-
8.0(Creepage Distance and Clearances)	-	1000	-
10.0(Terminals)	-	2000	-
11.0(External & Internal Wiring)	-	4000	-
12.0(Protection against electric shock)	-	1000	-
13.0(Endurance Tests and Thermal Tests)	-	4000	-
14.0(Resistance to Dust & Moisture)	-	8000	-
15.0(Insulation Resistance and Electric Strength)	-	2000	-
16.0(Resistance to Heat , fire and tracking)	-	6000	-

-
-

11417

Planet Electro Labs Private Limited (407)

8174226

IS 15885 : Part 2 : Sec 13 (2012)

Safety of lamp controlgear: Part 2 particular requirements: Sec 13 d.c. or a.c. supplied electronic controlgear for led modules

35500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	1000	-
9(Terminals)	-	2000	-
10(PROVISION FOR EARTHING)	-	2000	-
11(MOISTURE RESISTANCE)	-	8000	-
12(Electric Strength)	-	2000	-
14(Fault conditions)	-	5000	-
16(Construction)	-	2000	-
17(Creepage distance and clearances)	-	2000	-
18(Screws, current carrying parts and connections)	-	2000	-
19(Resistance to heat, fire and tracking)	-	4000	-
20(Resistance to corrosion)	-	1000	-
15(Transformer heating)	-	2000	-
8(Protection against accidental contact with live parts)	-	2500	-

-
-

11418

Planet Electro Labs Private Limited (407)

8174226

IS 10322 : Part 5 : Sec 5 (2013)

Luminaires: Part 5 particular requirements: Sec 5 floodlights (First Revision)

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Marking)	-	1000	-
7.0(Construction)	-	7000	-
8.0(Creepage Distance and Clearances)	-	1000	-
9.0(Provision for earthing)	-	2000	-
10.0(Terminals)	-	2000	-
11.0(External & Internal Wiring)	-	2000	-
12.0(Protection against electric shock)	-	1000	-
13.0(Endurance Tests and Thermal Tests)	-	2000	-
14.0(Resistance to Dust & Moisture)	-	5000	-
15.0(Insulation Resistance and Electric Strength)	-	2000	-
16.0(Resistance to Heat , fire and tracking)	-	2000	-
17.0(Photometric Test)	-	18000	-

-
-

11419

Softlines and Electrical Safety Testing Laboratory TUV Rheinland India Pvt Ltd., Gurgaon (8167106)

8167106

IS 6721 (2023)

SANDAL AND SLIPPERS SPECIFICATION First revision

45750 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. No.4(SHAPE AND DESIGN)	-	525	-
Cl. No.5("SIZE AND FITTINGS ")	-	525	-
Cl. No.6("CONSTRUCTION ")	-	525	-
Cl. No.7(MATERIAL)	-	550	-
Cl. No.8.1, Table no. 1(i),a("Tear strength, (other than moulded upper material) ")	-	655	-
Cl. No.8.1, Table no. 1(i),b("For all moulded upper material ")	-	655	-
Cl. No.8.1, Table no. 1(ii)(Flexing endurance)	-	1500	-
Cl. No.8.2,Table no. 2(i)(Tear strength)	-	655	-
Cl. No.8.3,Table no. 3(ii),a("Abrasion resistance- At dry condition")	-	1210	-
Cl. No.8.3,Table no. 3(ii),b("Abrasion resistance- At wet condition")	-	1210	-
Cl. No.8.3,Table no. 3(i)(Tear strength)	-	655	-
Cl. No.8.4,Table no. 4(i)(Grain crack index)	-	0.01	-
Cl. No.8.4,Table no. 4(ii)(Density)	-	500	-
Cl. No.8.4,Table no. 4(iii)(Abrasion resistance)	-	1210	-
Cl. No.8.4,Table no. 5(i)(Density)	-	500	-
Cl. No.8.4,Table no. 5(ii)("Abrasion resistance, Volume loss ")	-	1210	-
Cl. No.8.4, Table no. 5(iii)("Flexing resistance, At 30 000 flexes")	-	1500	-
Cl. No.8.5, Table no. 6(i)("Bond strength, N/mm, Min (Applicable when fore part is fully covered or strap width is more than 25 mm)")	-	1210	-
Cl. No.8.5, Table no. 6(ii)("Toe post attachment strength, N, Min (Applicable if toe post is present)")	-	1030	-
Cl. No.8.5, Table no. 6(iii)("Toe ring attachment strength, Min (Applicable if toe ring is not integral part of upper")	-	1030	-
Cl. No.8.5, Table no. 6(iv)(Strap to outsole strength)	-	1030	-
Cl. No.8.5, Table no. 6(v)("Attachment strength of back strap and Buckle/D-ring ")	-	1030	-
Cl. No.8.5, Table no. 6(vi)("Attachment strength of elastic, limit of useful extension, percent")	-	1030	-
Cl. No.8.5, Table no. 6(vii)("Attachment strength of back strap and velcro, N, Min (If, present)")	-	1030	-
Cl. No.8.5, Table no. 6(viii)("Hydrolysis resistance, Cut growth after 150 000 flexes, mm, Max (Applicable for PU sole only)")	-	3630	-
Cl. No.8.5, Table no. 6(ix)("Heel pull off strength, N, Min (Applicable for heel height 40 mm and above attached separately to the sandal/slipper)")	-	1030	-
Cl. No.8.5, Table no. 6(x)("Inter layer bond strength, N/mm, (Applicable for multi-layer sole)")	-	1210	-
Cl. No.8.5, Table no. 6(xi)("Slip Resistance, Coefficient of Friction (COF) (Not applicable for leather sole) (To be carried out on quarry tiles)")	-	3990	-
Cl. No.8.6.1,Table 1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	4200	4200 each (DD & CD)
Cl. No.8.6.1,Table 1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	3150	All Amines
Cl. No.8.6.1,Table 1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	2100	-
Cl. No.8.6.1,Table 1 of IS 17011(iv)(Chromium (VI))	-	2500	-
Cl. No.8.6.1,Table 1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	4200	-
Cl. No.8.6.1,Table 1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	3675	1575 -Free 2100 - Release
Cl. No.8.6.1,Table 1 of IS 17011(vii)(Formaldehyde)	-	525	-
Cl. No.8.6.1,Table 1 of IS 17011(viii)(Organotin compounds)	-	10500	10500 more than 5 analytes
Cl. No.8.6.1,Table 1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	5250	-
Cl. No.8.6.1,Table 1 of IS 17011(x)(pH)	-	700	-
Cl. No.8.6.1,Table 1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	3780	-
Cl. No.8.6.1,Table 1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	3150	-
Cl. No.8.6.2(Lead content)	-	1260	-
Cl. No.4(SHAPE AND DESIGN)	-	500	-
Cl. No.5("SIZE AND FITTINGS ")	-	500	-
Cl. No.6("CONSTRUCTION ")	-	1	-
Cl. No.7(MATERIAL)	-	1	-
Cl. No.8.1, Table no. 1(i),a("Tear strength, (other than moulded upper material) ")	-	1	-
Cl. No.8.1, Table no. 1(i),b("For all moulded upper material ")	-	1	-
Cl. No.8.1, Table no. 1(ii)(Flexing endurance)	-	1	-
Cl. No.8.2,Table no. 2(i)(Tear strength)	-	1	-
Cl. No.8.2,Table no. 2(ii),a("Abrasion resistance- At dry condition")	-	1	-
Cl. No.8.2,Table no. 2(ii),b("Abrasion resistance- At wet condition")	-	1	-
Cl. No.8.3,Table no. 3(i)(Tear strength)	-	1	-
Cl. No.8.3,Table no. 3(ii),a("Abrasion resistance- At dry condition")	-	1	-
Cl. No.8.3,Table no. 3(ii),b("Abrasion resistance- At wet condition")	-	1	-
Cl. No.8.4,Table no. 4(ii)(Density)	-	1	-
Cl. No.8.4,Table no. 5(i)(Density)	-	1	-
Cl. No.8.4,Table no. 5(ii)("Abrasion resistance, Volume loss ")	-	1	-
Cl. No.8.4, Table no. 5(iii)("Flexing resistance, At 30 000 flexes")	-	1	-
Cl. No.8.5, Table no. 6(i)("Bond strength, N/mm, Min (Applicable when fore part is fully covered or strap width is more than 25 mm)")	-	1	-
Cl. No.8.5, Table no. 6(ii)("Toe post attachment strength, N, Min (Applicable if toe post is present)")	-	1	-
Cl. No.8.5, Table no. 6(iii)("Toe ring attachment strength, Min (Applicable if toe ring is not integral part of upper")	-	1	-
Cl. No.8.5, Table no. 6(iv)(Strap to outsole strength)	-	1	-
Cl. No.8.5, Table no. 6(v)("Attachment strength of back strap and Buckle/D-ring ")	-	1	-
Cl. No.8.5, Table no. 6(vi)("Attachment strength of elastic, limit of useful extension, percent")	-	1	-
Cl. No.8.5, Table no. 6(vii)("Attachment strength of back strap and velcro, N, Min (If, present)")	-	1	-
Cl. No.8.5, Table no. 6(viii)("Hydrolysis resistance, Cut growth after 150 000 flexes, mm, Max (Applicable for PU sole only)")	-	1	-
Cl. No.8.5, Table no. 6(ix)("Heel pull off strength, N, Min (Applicable for heel height 40 mm and above attached separately to the sandal/slipper)")	-	1	-
Cl. No.8.5, Table no. 6(x)("Inter layer bond strength, N/mm, (Applicable for multi-layer sole)")	-	1	-
Cl. No.8.5, Table no. 6(xi)("Slip Resistance, Coefficient of Friction (COF) (Not applicable for leather sole) (To be carried out on quarry tiles)")	-	1	-
Cl. No.8.6.1,Table 1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	1	-
Cl. No.8.6.1,Table 1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	11	-
Cl. No.8.6.1,Table 1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	2000	-
Cl. No.8.6.1,Table 1 of IS 17011(iv)(Chromium (VI))	-	2000	-
Cl. No.8.6.1,Table 1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	700	-
Cl. No.8.6.1,Table 1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	700	-
Cl. No.8.6.1,Table 1 of IS 17011(vii)(Formaldehyde)	-	700	-
Cl. No.8.6.1,Table 1 of IS 17011(viii)(Organotin compounds)	-	4000	-
Cl. No.8.6.1,Table 1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	2100	-
Cl. No.8.6.1,Table 1 of IS 17011(x)(pH)	-	590	-
Cl. No.8.6.1,Table 1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	4000	-
Cl. No.8.6.1,Table 1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	2000	-
Cl. No.8.6.2(Lead content)	-	700	-
Cl. No.4(SHAPE AND DESIGN)	-	500	-
Cl-5 ((Amendment No-1)(Category And Type)	-	500	-
Cl. No.6("CONSTRUCTION ")	-	500	-
Cl. No.7(MATERIAL)	-	500	-
Cl.8 Table-1 S.No 1, (i) (Amendment No-1)(Bond strength , N/mm, Min)	-	500	-
Cl.8 Table-1 S.No 1, (ii) (Amendment No-1)(Toe post attachment strength)	-	500	-
Cl.8 Table-1 S.No 1, (iii) (Amendment No-1)(Toe ring attachment strength)	-	500	-
Cl.8 Table-1 S.No 1, (iv) (Amendment No-1)(Strap to outsole strength N, Min)	-	500	-
Cl.8 Table-1 S.No 1, (v) (Amendment No-1)(Attachment strength of back strap and buckle/D-ring N, Min)	-	500	-
Cl.8 Table-1 S.No 1, (vi) (Amendment No-1)(Limit of useful extension, percent, Min)	-	590	-
Cl.8 Table-1 S.No 1, (vii) (Amendment No-1)(Attachment strength of back strap and velcro, N, Mi)	-	500	-
Cl.8 Table-1 S.No 1, (viii) (Amendment No-1)(Hydrolysis resistance)	-	700	-
Cl.8 Table-1 S.No 1, (ix) (Amendment No-1)(Heel pull off strength)	-	700	-
Cl.8 Table-1 S.No 1, (x) (Amendment No-1)(Inter layer bond strength)	-	700	-
Cl.8 Table-1 S.No 1, (xi) (Amendment No-1)(Slip resistance, coefficient of friction (COF)3)	-	2000	-
Cl.8 Table-1 S.No 1, (xii) (Amendment No-1)(Abrasion resistance, (volume loss) mm3 , Max)	-	1050	-
Cl.8 Table-1 S.No 1, (xiii) (Amendment No-1)("Flexing resistance (Belt method or Bennewart flex method)")	-	1050	-
Cl. No.8.6.1,Table 1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	4000	-
Cl. No.8.6.1,Table 1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	2000	-
Cl. No.8.6.1,Table 1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	2000	-
Cl. No.8.6.1,Table 1 of IS 17011(iv)(Chromium (VI))	-	2000	-
Cl. No.8.6.1,Table 1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	2000	-
Cl. No.8.6.1,Table 1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	1050	-
Cl. No.8.6.1,Table 1 of IS 17011(vii)(Formaldehyde)	-	1050	-
Cl. No.8.6.1,Table 1 of IS 17011(viii)(Organotin compounds)	-	1950	-
Cl. No.8.6.1,Table 1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	1950	-
Cl. No.8.6.1,Table 1 of IS 17011(x)(pH)	-	500	-
Cl. No.8.6.1,Table 1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	4500	-
Cl. No.8.6.1,Table 1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	2000	-
Cl.8 Table-1 S.No 1, (xv) (Amendment No-1)(Lead content (as Pb)7 ppm)	-	1050	-
Cl.9 Table-2 S.No 1, (i) a (Amendment No-1)(Tear strength for other than moulded upper material)	-	700	-
Cl.9 Table-2 S.No 1, (i) b (Amendment No-1)(Tear strength For all moulded upper material)	-	700	-
Cl.9 Table-2 S.No 1, (ii) (Amendment No-1)(Flexing endurance)	-	4000	-
Cl.9 Table-3 S.No 1, (i) (Amendment No-1)(Tear strength, N, Min)	-	700	-
Cl.9 Table-3 S.No 1, (ii) (Amendment No-1)("Abrasion resistance (a) dry condition (b) wet condition")	-	1050	-
Cl.9 Table-4 S.No 1, (i) (Amendment No-1)(Tear strength, N, Min)	-	1050	-
Cl.9 Table-4 S.No 1, (ii) (Amendment No-1)("Abrasion resistance (a) dry condition (b) wet condition")	-	1050	-
Cl.9 Table-5 S.No 1, (i) (Amendment No-1)(Grain crack index)	-	700	-
Cl.9 Table-5 S.No 1, (ii) (Amendment No-1)(Density, g/cm3 , Min)	-	500	-
Cl.9 Table-6 S.No 1, (i) (Amendment No-1)("Density, g/cm3 , Min (a)-Cellular, (b) Solid ")	-	500	-
Cl-10 (Amendment No-1)(Marking)	-	500	-
Cl.8 Table-1 S.No 1, (xiv) (Amendment No-1)(Chemical Requirements)	-	21000	-
Cl. No.8.1, Table no. 1(i),a("Tear strength, (other than moulded upper material) ")	-	500	-
Cl. No.8.1, Table no. 1(i),b("For all moulded upper material ")	-	500	-
Cl. No.8.1, Table no. 1(ii)(Flexing endurance)	-	4000	-
Cl. No.8.2,Table no. 2(i)(Tear strength)	-	700	-
Cl. No.8.2,Table no. 2(ii),a("Abrasion resistance- At dry condition")	-	1050	-
Cl. No.8.2,Table no. 2(ii),b("Abrasion resistance- At wet condition")	-	1050	-
Cl. No.8.3,Table no. 3(i)(Tear strength)	-	800	-
Cl. No.8.3,Table no. 3(ii),a("Abrasion resistance- At dry condition")	-	1050	-
Cl. No.8.3,Table no. 3(ii),b("Abrasion resistance- At wet condition")	-	1050	-
Cl. No.8.4,Table no. 4(i)(Grain crack index)	-	700	-
Cl. No.8.4,Table no. 4(ii)(Density)	-	500	-
Cl. No.8.4,Table no. 5(i)(Density)	-	500	-
Cl. No.8.4,Table no. 5(ii)("Abrasion resistance, Volume loss ")	-	1050	-
Cl. No.8.4, Table no. 5(iii)("Flexing resistance, At 30 000 flexes")	-	1050	-
Cl. No.8.("Requirement of Complete Sandal and Slipper (Chemical Requirements) ")	-	21000	-
Cl. No.9.(MARKING AND PACKING)	-	500	-
Cl. No.8.6.2(Lead content)	-	800	-
Cl. No.5("SIZE AND FITTINGS ")	-	500	-
Cl. No.8.5, Table no. 6(i)("Bond strength, N/mm, Min (Applicable when fore part is fully covered or strap width is more than 25 mm)")	-	500	-
Cl. No.8.5, Table no. 6(ii)("Toe post attachment strength, N, Min (Applicable if toe post is present)")	-	500	-
Cl. No.8.5, Table no. 6(iii)("Toe ring attachment strength, Min (Applicable if toe ring is not integral part of upper")	-	500	-
Cl. No.8.5, Table no. 6(iv)(Strap to outsole strength)	-	500	-
Cl. No.8.5, Table no. 6(v)("Attachment strength of back strap and Buckle/D-ring ")	-	500	-
Cl. No.8.5, Table no. 6(vi)("Attachment strength of elastic, limit of useful extension, percent")	-	500	-
Cl. No.8.5, Table no. 6(vii)("Attachment strength of back strap and velcro, N, Min (If, present)")	-	500	-
Cl. No.8.5, Table no. 6(viii)("Hydrolysis resistance, Cut growth after 150 000 flexes, mm, Max (Applicable for PU sole only)")	-	500	-
Cl. No.8.5, Table no. 6(ix)("Heel pull off strength, N, Min (Applicable for heel height 40 mm and above attached separately to the sandal/slipper)")	-	500	-
Cl. No.8.5, Table no. 6(x)("Inter layer bond strength, N/mm, (Applicable for multi-layer sole)")	-	500	-
Cl. No.8.5, Table no. 6(xi)("Slip Resistance, Coefficient of Friction (COF) (Not applicable for leather sole) (To be carried out on quarry tiles)")	-	1020	-
Cl.9 Table-5 S.No 1, (iii) (Amendment No-1)(Abrasion resistance, mm/kcs)	-	900	-
Cl.8 - Table No 1 - Sl. No.-xv("Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988")	-	800	-
Cl.8 - Table No 1 - Sl. No.-xiv(pH- IS 1390:2022)	-	500	-
Cl.8 - Table No 1 - Sl. No.-xv("Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988")	-	800	-
Cl.8 - Table No 1 - Sl. No.-xiv(pH- IS 1390:2022)	-	500	-
Cl. No.4(SHAPE AND DESIGN)	-	1	-
Cl-5 ((Amendment No-1)(Category And Type)	-	1	-
Cl. No.6("CONSTRUCTION ")	-	1	-
Cl. No.7(MATERIAL)	-	1	-
Cl.8 Table-1 S.No 1, (i) (Amendment No-1)(Bond strength , N/mm, Min)	-	1	-
Cl.8 Table-1 S.No 1, (ii) (Amendment No-1)(Toe post attachment strength)	-	1	-
Cl.8 Table-1 S.No 1, (iii) (Amendment No-1)(Toe ring attachment strength)	-	1	-
Cl.8 Table-1 S.No 1, (iv) (Amendment No-1)(Strap to outsole strength N, Min)	-	1	-
Cl.8 Table-1 S.No 1, (v) (Amendment No-1)(Attachment strength of back strap and buckle/D-ring N, Min)	-	1	-
Cl.8 Table-1 S.No 1, (vi) (Amendment No-1)(Limit of useful extension, percent, Min)	-	1	-
Cl.8 Table-1 S.No 1, (vii) (Amendment No-1)(Attachment strength of back strap and velcro, N, Mi)	-	1	-
Cl.8 Table-1 S.No 1, (viii) (Amendment No-1)(Hydrolysis resistance)	-	1	-
Cl.8 Table-1 S.No 1, (ix) (Amendment No-1)(Heel pull off strength)	-	1	-
Cl.8 Table-1 S.No 1, (x) (Amendment No-1)(Inter layer bond strength)	-	1	-
Cl.8 Table-1 S.No 1, (xi) (Amendment No-1)(Slip resistance, coefficient of friction (COF)3)	-	1	-
Cl.8 Table-1 S.No 1, (xii) (Amendment No-1)(Abrasion resistance, (volume loss) mm3 , Max)	-	1	-
Cl.8 Table-1 S.No 1, (xiii) (Amendment No-1)("Flexing resistance (Belt method or Bennewart flex method)")	-	1	-
Cl. No.8.6.1,Table 1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	1	-
Cl. No.8.6.1,Table 1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	1	-
Cl. No.8.6.1,Table 1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	1	-
Cl. No.8.6.1,Table 1 of IS 17011(iv)(Chromium (VI))	-	1	-
Cl. No.8.6.1,Table 1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	1	-
Cl. No.8.6.1,Table 1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	1	-
Cl. No.8.6.1,Table 1 of IS 17011(vii)(Formaldehyde)	-	1	-
Cl. No.8.6.1,Table 1 of IS 17011(viii)(Organotin compounds)	-	1	-
Cl. No.8.6.1,Table 1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	1	-
Cl. No.8.6.1,Table 1 of IS 17011(x)(pH)	-	1	-
Cl. No.8.6.1,Table 1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	1	-
Cl. No.8.6.1,Table 1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	1	-
Cl.8 Table-1 S.No 1, (xv) (Amendment No-1)(Lead content (as Pb)7 ppm)	-	1	-
Cl.9 Table-2 S.No 1, (i) a (Amendment No-1)(Tear strength for other than moulded upper material)	-	1	-
Cl.9 Table-2 S.No 1, (i) b (Amendment No-1)(Tear strength For all moulded upper material)	-	1	-
Cl.9 Table-2 S.No 1, (ii) (Amendment No-1)(Flexing endurance)	-	1	-
Cl.9 Table-3 S.No 1, (i) (Amendment No-1)(Tear strength, N, Min)	-	1	-
Cl.9 Table-3 S.No 1, (ii) (Amendment No-1)("Abrasion resistance (a) dry condition (b) wet condition")	-	1	-
Cl.9 Table-4 S.No 1, (i) (Amendment No-1)(Tear strength, N, Min)	-	1	-
Cl.9 Table-4 S.No 1, (ii) (Amendment No-1)("Abrasion resistance (a) dry condition (b) wet condition")	-	1	-
Cl.9 Table-5 S.No 1, (i) (Amendment No-1)(Grain crack index)	-	1	-
Cl.9 Table-5 S.No 1, (ii) (Amendment No-1)(Density, g/cm3 , Min)	-	1	-
Cl.9 Table-6 S.No 1, (i) (Amendment No-1)("Density, g/cm3 , Min (a)-Cellular, (b) Solid ")	-	1	-
Cl-10 (Amendment No-1)(Marking)	-	1	-
Cl.8 Table-1 S.No 1, (xiv) (Amendment No-1)(Chemical Requirements)	-	1	-
Cl. No.8.1, Table no. 1(i),a("Tear strength, (other than moulded upper material) ")	-	1	-
Cl. No.8.1, Table no. 1(i),b("For all moulded upper material ")	-	1	-
Cl. No.8.1, Table no. 1(ii)(Flexing endurance)	-	1	-
Cl. No.8.2,Table no. 2(i)(Tear strength)	-	1	-
Cl. No.8.2,Table no. 2(ii),a("Abrasion resistance- At dry condition")	-	1	-
Cl. No.8.2,Table no. 2(ii),b("Abrasion resistance- At wet condition")	-	1	-
Cl. No.8.3,Table no. 3(i)(Tear strength)	-	1	-
Cl. No.8.3,Table no. 3(ii),a("Abrasion resistance- At dry condition")	-	1	-
Cl. No.8.3,Table no. 3(ii),b("Abrasion resistance- At wet condition")	-	1	-
Cl. No.8.4,Table no. 4(i)(Grain crack index)	-	1	-
Cl. No.8.4,Table no. 4(ii)(Density)	-	1	-
Cl. No.8.4,Table no. 5(i)(Density)	-	1	-
Cl. No.8.4,Table no. 5(ii)("Abrasion resistance, Volume loss ")	-	1	-
Cl. No.8.4, Table no. 5(iii)("Flexing resistance, At 30 000 flexes")	-	1	-
Cl. No.8.("Requirement of Complete Sandal and Slipper (Chemical Requirements) ")	-	1	-
Cl. No.9.(MARKING AND PACKING)	-	1	-
Cl. No.8.6.2(Lead content)	-	1	-
Cl. No.5("SIZE AND FITTINGS ")	-	1	-
Cl. No.8.5, Table no. 6(i)("Bond strength, N/mm, Min (Applicable when fore part is fully covered or strap width is more than 25 mm)")	-	1	-
Cl. No.8.5, Table no. 6(ii)("Toe post attachment strength, N, Min (Applicable if toe post is present)")	-	1	-
Cl. No.8.5, Table no. 6(iii)("Toe ring attachment strength, Min (Applicable if toe ring is not integral part of upper")	-	1	-
Cl. No.8.5, Table no. 6(iv)(Strap to outsole strength)	-	1	-
Cl. No.8.5, Table no. 6(v)("Attachment strength of back strap and Buckle/D-ring ")	-	1	-
Cl. No.8.5, Table no. 6(vi)("Attachment strength of elastic, limit of useful extension, percent")	-	1	-
Cl. No.8.5, Table no. 6(vii)("Attachment strength of back strap and velcro, N, Min (If, present)")	-	1	-
Cl. No.8.5, Table no. 6(viii)("Hydrolysis resistance, Cut growth after 150 000 flexes, mm, Max (Applicable for PU sole only)")	-	1	-
Cl. No.8.5, Table no. 6(ix)("Heel pull off strength, N, Min (Applicable for heel height 40 mm and above attached separately to the sandal/slipper)")	-	1	-
Cl. No.8.5, Table no. 6(x)("Inter layer bond strength, N/mm, (Applicable for multi-layer sole)")	-	1	-
Cl. No.8.5, Table no. 6(xi)("Slip Resistance, Coefficient of Friction (COF) (Not applicable for leather sole) (To be carried out on quarry tiles)")	-	1	-
Cl.9 Table-5 S.No 1, (iii) (Amendment No-1)(Abrasion resistance, mm/kcs)	-	1	-
Cl.8 - Table No 1 - Sl. No.-xv("Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988")	-	1	-
Cl.8 - Table No 1 - Sl. No.-xiv(pH- IS 1390:2022)	-	1	-
Cl.8 - Table No 1 - Sl. No.-xv("Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988")	-	1	-
Cl.8 - Table No 1 - Sl. No.-xiv(pH- IS 1390:2022)	-	1	-
Cl. No.4(SHAPE AND DESIGN)	-	1	-
Cl-5 ((Amendment No-1)(Category And Type)	-	1	-
Cl. No.6("CONSTRUCTION ")	-	1	-
Cl. No.7(MATERIAL)	-	1	-
Cl.8 Table-1 S.No 1, (i) (Amendment No-1)(Bond strength , N/mm, Min)	-	1	-
Cl.8 Table-1 S.No 1, (ii) (Amendment No-1)(Toe post attachment strength)	-	1	-
Cl.8 Table-1 S.No 1, (iii) (Amendment No-1)(Toe ring attachment strength)	-	1	-
Cl.8 Table-1 S.No 1, (iv) (Amendment No-1)(Strap to outsole strength N, Min)	-	1	-
Cl.8 Table-1 S.No 1, (v) (Amendment No-1)(Attachment strength of back strap and buckle/D-ring N, Min)	-	1	-
Cl.8 Table-1 S.No 1, (vi) (Amendment No-1)(Limit of useful extension, percent, Min)	-	1	-
Cl.8 Table-1 S.No 1, (vii) (Amendment No-1)(Attachment strength of back strap and velcro, N, Mi)	-	1	-
Cl.8 Table-1 S.No 1, (viii) (Amendment No-1)(Hydrolysis resistance)	-	1	-
Cl.8 Table-1 S.No 1, (ix) (Amendment No-1)(Heel pull off strength)	-	1	-
Cl.8 Table-1 S.No 1, (x) (Amendment No-1)(Inter layer bond strength)	-	1	-
Cl.8 Table-1 S.No 1, (xi) (Amendment No-1)(Slip resistance, coefficient of friction (COF)3)	-	1	-
Cl.8 Table-1 S.No 1, (xii) (Amendment No-1)(Abrasion resistance, (volume loss) mm3 , Max)	-	1	-
Cl.8 Table-1 S.No 1, (xiii) (Amendment No-1)("Flexing resistance (Belt method or Bennewart flex method)")	-	1	-
Cl. No.8.6.1,Table 1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	1	-
Cl. No.8.6.1,Table 1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	1	-
Cl. No.8.6.1,Table 1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	1	-
Cl. No.8.6.1,Table 1 of IS 17011(iv)(Chromium (VI))	-	1	-
Cl. No.8.6.1,Table 1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	1	-
Cl. No.8.6.1,Table 1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	1	-
Cl. No.8.6.1,Table 1 of IS 17011(vii)(Formaldehyde)	-	1	-
Cl. No.8.6.1,Table 1 of IS 17011(viii)(Organotin compounds)	-	1	-
Cl. No.8.6.1,Table 1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	1	-
Cl. No.8.6.1,Table 1 of IS 17011(x)(pH)	-	1	-
Cl. No.8.6.1,Table 1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	1	-
Cl. No.8.6.1,Table 1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	1	-
Cl.8 Table-1 S.No 1, (xv) (Amendment No-1)(Lead content (as Pb)7 ppm)	-	1	-
Cl.9 Table-2 S.No 1, (i) a (Amendment No-1)(Tear strength for other than moulded upper material)	-	1	-
Cl.9 Table-2 S.No 1, (i) b (Amendment No-1)(Tear strength For all moulded upper material)	-	11	-
Cl.9 Table-2 S.No 1, (ii) (Amendment No-1)(Flexing endurance)	-	1	-
Cl.9 Table-3 S.No 1, (i) (Amendment No-1)(Tear strength, N, Min)	-	1	-
Cl.9 Table-3 S.No 1, (ii) (Amendment No-1)("Abrasion resistance (a) dry condition (b) wet condition")	-	1	-
Cl.9 Table-4 S.No 1, (i) (Amendment No-1)(Tear strength, N, Min)	-	1	-
Cl.9 Table-4 S.No 1, (ii) (Amendment No-1)("Abrasion resistance (a) dry condition (b) wet condition")	-	1	-
Cl.9 Table-5 S.No 1, (i) (Amendment No-1)(Grain crack index)	-	1	-
Cl.9 Table-5 S.No 1, (ii) (Amendment No-1)(Density, g/cm3 , Min)	-	1	-
Cl.9 Table-6 S.No 1, (i) (Amendment No-1)("Density, g/cm3 , Min (a)-Cellular, (b) Solid ")	-	1	-
Cl-10 (Amendment No-1)(Marking)	-	1	-
Cl.8 Table-1 S.No 1, (xiv) (Amendment No-1)(Chemical Requirements)	-	1	-
Cl. No.8.1, Table no. 1(i),a("Tear strength, (other than moulded upper material) ")	-	1	-
Cl. No.8.1, Table no. 1(i),b("For all moulded upper material ")	-	1	-
Cl. No.8.1, Table no. 1(ii)(Flexing endurance)	-	1	-
Cl. No.8.2,Table no. 2(i)(Tear strength)	-	1	-
Cl. No.8.2,Table no. 2(ii),a("Abrasion resistance- At dry condition")	-	1	-
Cl. No.8.2,Table no. 2(ii),b("Abrasion resistance- At wet condition")	-	1	-
Cl. No.8.3,Table no. 3(i)(Tear strength)	-	1	-
Cl. No.8.3,Table no. 3(ii),a("Abrasion resistance- At dry condition")	-	1	-
Cl. No.8.3,Table no. 3(ii),b("Abrasion resistance- At wet condition")	-	1	-
Cl. No.8.4,Table no. 4(i)(Grain crack index)	-	1	-
Cl. No.8.4,Table no. 4(ii)(Density)	-	1	-
Cl. No.8.4,Table no. 5(i)(Density)	-	1	-
Cl. No.8.4,Table no. 5(ii)("Abrasion resistance, Volume loss ")	-	1	-
Cl. No.8.4, Table no. 5(iii)("Flexing resistance, At 30 000 flexes")	-	1	-
Cl. No.8.("Requirement of Complete Sandal and Slipper (Chemical Requirements) ")	-	1	-
Cl. No.9.(MARKING AND PACKING)	-	1	-
Cl. No.8.6.2(Lead content)	-	1	-
Cl. No.5("SIZE AND FITTINGS ")	-	1	-
Cl. No.8.5, Table no. 6(i)("Bond strength, N/mm, Min (Applicable when fore part is fully covered or strap width is more than 25 mm)")	-	1	-
Cl. No.8.5, Table no. 6(ii)("Toe post attachment strength, N, Min (Applicable if toe post is present)")	-	1	-
Cl. No.8.5, Table no. 6(iii)("Toe ring attachment strength, Min (Applicable if toe ring is not integral part of upper")	-	1	-
Cl. No.8.5, Table no. 6(iv)(Strap to outsole strength)	-	1	-
Cl. No.8.5, Table no. 6(v)("Attachment strength of back strap and Buckle/D-ring ")	-	1	-
Cl. No.8.5, Table no. 6(vi)("Attachment strength of elastic, limit of useful extension, percent")	-	1	-
Cl. No.8.5, Table no. 6(vii)("Attachment strength of back strap and velcro, N, Min (If, present)")	-	1	-
Cl. No.8.5, Table no. 6(viii)("Hydrolysis resistance, Cut growth after 150 000 flexes, mm, Max (Applicable for PU sole only)")	-	1	-
Cl. No.8.5, Table no. 6(ix)("Heel pull off strength, N, Min (Applicable for heel height 40 mm and above attached separately to the sandal/slipper)")	-	1	-
Cl. No.8.5, Table no. 6(x)("Inter layer bond strength, N/mm, (Applicable for multi-layer sole)")	-	1	-
Cl. No.8.5, Table no. 6(xi)("Slip Resistance, Coefficient of Friction (COF) (Not applicable for leather sole) (To be carried out on quarry tiles)")	-	1	-
Cl.9 Table-5 S.No 1, (iii) (Amendment No-1)(Abrasion resistance, mm/kcs)	-	1	-
Cl.8 - Table No 1 - Sl. No.-xv("Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988")	-	1	-
Cl.8 - Table No 1 - Sl. No.-xiv(pH- IS 1390:2022)	-	1	-
Cl.8 - Table No 1 - Sl. No.-xv("Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988")	-	1	-
Cl.8 - Table No 1 - Sl. No.-xiv(pH- IS 1390:2022)	-	1	-
Cl. No.4(SHAPE AND DESIGN)	-	1	-
Cl-5 ((Amendment No-1)(Category And Type)	-	1	-
Cl. No.6("CONSTRUCTION ")	-	1	-
Cl. No.7(MATERIAL)	-	1	-
Cl.8 Table-1 S.No 1, (i) (Amendment No-1)(Bond strength , N/mm, Min)	-	1	-
Cl.8 Table-1 S.No 1, (ii) (Amendment No-1)(Toe post attachment strength)	-	1	-
Cl.8 Table-1 S.No 1, (iii) (Amendment No-1)(Toe ring attachment strength)	-	1	-
Cl.8 Table-1 S.No 1, (iv) (Amendment No-1)(Strap to outsole strength N, Min)	-	1	-
Cl.8 Table-1 S.No 1, (v) (Amendment No-1)(Attachment strength of back strap and buckle/D-ring N, Min)	-	1	-
Cl.8 Table-1 S.No 1, (vi) (Amendment No-1)(Limit of useful extension, percent, Min)	-	1	-
Cl.8 Table-1 S.No 1, (vii) (Amendment No-1)(Attachment strength of back strap and velcro, N, Mi)	-	1	-
Cl.8 Table-1 S.No 1, (viii) (Amendment No-1)(Hydrolysis resistance)	-	1	-
Cl.8 Table-1 S.No 1, (ix) (Amendment No-1)(Heel pull off strength)	-	1	-
Cl.8 Table-1 S.No 1, (x) (Amendment No-1)(Inter layer bond strength)	-	1	-
Cl.8 Table-1 S.No 1, (xi) (Amendment No-1)(Slip resistance, coefficient of friction (COF)3)	-	1	1
Cl.8 Table-1 S.No 1, (xii) (Amendment No-1)(Abrasion resistance, (volume loss) mm3 , Max)	-	1	-
Cl.8 Table-1 S.No 1, (xiii) (Amendment No-1)("Flexing resistance (Belt method or Bennewart flex method)")	-	1	-
Cl. No.8.6.1,Table 1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	1	-
Cl. No.8.6.1,Table 1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	1	-
Cl. No.8.6.1,Table 1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	1	-
Cl. No.8.6.1,Table 1 of IS 17011(iv)(Chromium (VI))	-	1	-
Cl. No.8.6.1,Table 1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	1	-
Cl. No.8.6.1,Table 1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	1	-
Cl. No.8.6.1,Table 1 of IS 17011(vii)(Formaldehyde)	-	1	-
Cl. No.8.6.1,Table 1 of IS 17011(viii)(Organotin compounds)	-	1	-
Cl. No.8.6.1,Table 1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	1	-
Cl. No.8.6.1,Table 1 of IS 17011(x)(pH)	-	1	-
Cl. No.8.6.1,Table 1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	1	-
Cl. No.8.6.1,Table 1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	1	-
Cl.8 Table-1 S.No 1, (xv) (Amendment No-1)(Lead content (as Pb)7 ppm)	-	1	-
Cl.9 Table-2 S.No 1, (i) a (Amendment No-1)(Tear strength for other than moulded upper material)	-	1	-
Cl.9 Table-2 S.No 1, (i) b (Amendment No-1)(Tear strength For all moulded upper material)	-	1	-
Cl.9 Table-2 S.No 1, (ii) (Amendment No-1)(Flexing endurance)	-	1	-
Cl.9 Table-3 S.No 1, (i) (Amendment No-1)(Tear strength, N, Min)	-	1	-
Cl.9 Table-3 S.No 1, (ii) (Amendment No-1)("Abrasion resistance (a) dry condition (b) wet condition")	-	1	-
Cl.9 Table-4 S.No 1, (i) (Amendment No-1)(Tear strength, N, Min)	-	1	-
Cl.9 Table-4 S.No 1, (ii) (Amendment No-1)("Abrasion resistance (a) dry condition (b) wet condition")	-	1	-
Cl.9 Table-5 S.No 1, (i) (Amendment No-1)(Grain crack index)	-	1	-
Cl.9 Table-5 S.No 1, (ii) (Amendment No-1)(Density, g/cm3 , Min)	-	1	-
Cl.9 Table-6 S.No 1, (i) (Amendment No-1)("Density, g/cm3 , Min (a)-Cellular, (b) Solid ")	-	1	-
Cl-10 (Amendment No-1)(Marking)	-	1	-
Cl.8 Table-1 S.No 1, (xiv) (Amendment No-1)(Chemical Requirements)	-	1	-
Cl. No.8.1, Table no. 1(i),a("Tear strength, (other than moulded upper material) ")	-	1	-
Cl. No.8.1, Table no. 1(i),b("For all moulded upper material ")	-	1	-
Cl. No.8.1, Table no. 1(ii)(Flexing endurance)	-	1	-
Cl. No.8.2,Table no. 2(i)(Tear strength)	-	1	-
Cl. No.8.2,Table no. 2(ii),a("Abrasion resistance- At dry condition")	-	1	-
Cl. No.8.2,Table no. 2(ii),b("Abrasion resistance- At wet condition")	-	1	-
Cl. No.8.3,Table no. 3(i)(Tear strength)	-	1	-
Cl. No.8.3,Table no. 3(ii),a("Abrasion resistance- At dry condition")	-	1	-
Cl. No.8.3,Table no. 3(ii),b("Abrasion resistance- At wet condition")	-	1	-
Cl. No.8.4,Table no. 4(i)(Grain crack index)	-	1	-
Cl. No.8.4,Table no. 4(ii)(Density)	-	1	-
Cl. No.8.4,Table no. 5(i)(Density)	-	1	-
Cl. No.8.4,Table no. 5(ii)("Abrasion resistance, Volume loss ")	-	1	-
Cl. No.8.4, Table no. 5(iii)("Flexing resistance, At 30 000 flexes")	-	1	-
Cl. No.8.("Requirement of Complete Sandal and Slipper (Chemical Requirements) ")	-	1	-
Cl. No.9.(MARKING AND PACKING)	-	1	-
Cl. No.8.6.2(Lead content)	-	1	-
Cl. No.5("SIZE AND FITTINGS ")	-	1	-
Cl. No.8.5, Table no. 6(i)("Bond strength, N/mm, Min (Applicable when fore part is fully covered or strap width is more than 25 mm)")	-	1	-
Cl. No.8.5, Table no. 6(ii)("Toe post attachment strength, N, Min (Applicable if toe post is present)")	-	1	-
Cl. No.8.5, Table no. 6(iii)("Toe ring attachment strength, Min (Applicable if toe ring is not integral part of upper")	-	1	-
Cl. No.8.5, Table no. 6(iv)(Strap to outsole strength)	-	1	-
Cl. No.8.5, Table no. 6(v)("Attachment strength of back strap and Buckle/D-ring ")	-	1	-
Cl. No.8.5, Table no. 6(vi)("Attachment strength of elastic, limit of useful extension, percent")	-	1	-
Cl. No.8.5, Table no. 6(vii)("Attachment strength of back strap and velcro, N, Min (If, present)")	-	1	-
Cl. No.8.5, Table no. 6(viii)("Hydrolysis resistance, Cut growth after 150 000 flexes, mm, Max (Applicable for PU sole only)")	-	1	-
Cl. No.8.5, Table no. 6(ix)("Heel pull off strength, N, Min (Applicable for heel height 40 mm and above attached separately to the sandal/slipper)")	-	1	-
Cl. No.8.5, Table no. 6(x)("Inter layer bond strength, N/mm, (Applicable for multi-layer sole)")	-	1	-
Cl. No.8.5, Table no. 6(xi)("Slip Resistance, Coefficient of Friction (COF) (Not applicable for leather sole) (To be carried out on quarry tiles)")	-	1	-
Cl.9 Table-5 S.No 1, (iii) (Amendment No-1)(Abrasion resistance, mm/kcs)	-	1	-
Cl.8 - Table No 1 - Sl. No.-xv("Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988")	-	1	-
Cl.8 - Table No 1 - Sl. No.-xiv(pH- IS 1390:2022)	-	1	-
Cl.8 - Table No 1 - Sl. No.-xv("Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988")	-	1	-
Cl.8 - Table No 1 - Sl. No.-xiv(pH- IS 1390:2022)	-	1	-
Cl. No.4(SHAPE AND DESIGN)	-	1	-
Cl-5 ((Amendment No-1)(Category And Type)	-	1	-
Cl. No.6("CONSTRUCTION ")	-	1	-
Cl. No.7(MATERIAL)	-	1	-
Cl.8 Table-1 S.No 1, (i) (Amendment No-1)(Bond strength , N/mm, Min)	-	1	-
Cl.8 Table-1 S.No 1, (ii) (Amendment No-1)(Toe post attachment strength)	-	1	-
Cl.8 Table-1 S.No 1, (iii) (Amendment No-1)(Toe ring attachment strength)	-	1	-
Cl.8 Table-1 S.No 1, (iv) (Amendment No-1)(Strap to outsole strength N, Min)	-	1	-
Cl.8 Table-1 S.No 1, (v) (Amendment No-1)(Attachment strength of back strap and buckle/D-ring N, Min)	-	1	-
Cl.8 Table-1 S.No 1, (vi) (Amendment No-1)(Limit of useful extension, percent, Min)	-	1	-
Cl.8 Table-1 S.No 1, (vii) (Amendment No-1)(Attachment strength of back strap and velcro, N, Mi)	-	1	-
Cl.8 Table-1 S.No 1, (viii) (Amendment No-1)(Hydrolysis resistance)	-	1	-
Cl.8 Table-1 S.No 1, (ix) (Amendment No-1)(Heel pull off strength)	-	1	-
Cl.8 Table-1 S.No 1, (x) (Amendment No-1)(Inter layer bond strength)	-	1	-
Cl.8 Table-1 S.No 1, (xi) (Amendment No-1)(Slip resistance, coefficient of friction (COF)3)	-	1	-
Cl.8 Table-1 S.No 1, (xii) (Amendment No-1)(Abrasion resistance, (volume loss) mm3 , Max)	-	1	-
Cl.8 Table-1 S.No 1, (xiii) (Amendment No-1)("Flexing resistance (Belt method or Bennewart flex method)")	-	1	-
Cl. No.8.6.1,Table 1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	1	-
Cl. No.8.6.1,Table 1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	1	-
Cl. No.8.6.1,Table 1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	1	-
Cl. No.8.6.1,Table 1 of IS 17011(iv)(Chromium (VI))	-	1	-
Cl. No.8.6.1,Table 1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	1	-
Cl. No.8.6.1,Table 1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	1	-
Cl. No.8.6.1,Table 1 of IS 17011(vii)(Formaldehyde)	-	1	-
Cl. No.8.6.1,Table 1 of IS 17011(viii)(Organotin compounds)	-	1	-
Cl. No.8.6.1,Table 1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	1	-
Cl. No.8.6.1,Table 1 of IS 17011(x)(pH)	-	1	-
Cl. No.8.6.1,Table 1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	1	-
Cl. No.8.6.1,Table 1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	1	-
Cl.8 Table-1 S.No 1, (xv) (Amendment No-1)(Lead content (as Pb)7 ppm)	-	1	-
Cl.9 Table-2 S.No 1, (i) a (Amendment No-1)(Tear strength for other than moulded upper material)	-	1	-
Cl.9 Table-2 S.No 1, (i) b (Amendment No-1)(Tear strength For all moulded upper material)	-	1	-
Cl.9 Table-2 S.No 1, (ii) (Amendment No-1)(Flexing endurance)	-	1	-
Cl.9 Table-3 S.No 1, (i) (Amendment No-1)(Tear strength, N, Min)	-	1	-
Cl.9 Table-3 S.No 1, (ii) (Amendment No-1)("Abrasion resistance (a) dry condition (b) wet condition")	-	1	-
Cl.9 Table-4 S.No 1, (i) (Amendment No-1)(Tear strength, N, Min)	-	1	-
Cl.9 Table-4 S.No 1, (ii) (Amendment No-1)("Abrasion resistance (a) dry condition (b) wet condition")	-	1	-
Cl.9 Table-5 S.No 1, (i) (Amendment No-1)(Grain crack index)	-	1	-
Cl.9 Table-5 S.No 1, (ii) (Amendment No-1)(Density, g/cm3 , Min)	-	1	-
Cl.9 Table-6 S.No 1, (i) (Amendment No-1)("Density, g/cm3 , Min (a)-Cellular, (b) Solid ")	-	1	-
Cl-10 (Amendment No-1)(Marking)	-	1	-
Cl.8 Table-1 S.No 1, (xiv) (Amendment No-1)(Chemical Requirements)	-	1	-
Cl. No.8.1, Table no. 1(i),a("Tear strength, (other than moulded upper material) ")	-	1	-
Cl. No.8.1, Table no. 1(i),b("For all moulded upper material ")	-	1	-
Cl. No.8.1, Table no. 1(ii)(Flexing endurance)	-	1	-
Cl. No.8.2,Table no. 2(i)(Tear strength)	-	1	-
Cl. No.8.2,Table no. 2(ii),a("Abrasion resistance- At dry condition")	-	1	-
Cl. No.8.2,Table no. 2(ii),b("Abrasion resistance- At wet condition")	-	1	-
Cl. No.8.3,Table no. 3(i)(Tear strength)	-	1	-
Cl. No.8.3,Table no. 3(ii),a("Abrasion resistance- At dry condition")	-	1	-
Cl. No.8.3,Table no. 3(ii),b("Abrasion resistance- At wet condition")	-	1	-
Cl. No.8.4,Table no. 4(i)(Grain crack index)	-	1	-
Cl. No.8.4,Table no. 4(ii)(Density)	-	1	-
Cl. No.8.4,Table no. 5(i)(Density)	-	1	-
Cl. No.8.4,Table no. 5(ii)("Abrasion resistance, Volume loss ")	-	1	-
Cl. No.8.4, Table no. 5(iii)("Flexing resistance, At 30 000 flexes")	-	1	-
Cl. No.8.("Requirement of Complete Sandal and Slipper (Chemical Requirements) ")	-	1	-
Cl. No.9.(MARKING AND PACKING)	-	1	-
Cl. No.8.6.2(Lead content)	-	1	-
Cl. No.5("SIZE AND FITTINGS ")	-	1	-
Cl. No.8.5, Table no. 6(i)("Bond strength, N/mm, Min (Applicable when fore part is fully covered or strap width is more than 25 mm)")	-	1	-
Cl. No.8.5, Table no. 6(ii)("Toe post attachment strength, N, Min (Applicable if toe post is present)")	-	1	-
Cl. No.8.5, Table no. 6(iii)("Toe ring attachment strength, Min (Applicable if toe ring is not integral part of upper")	-	1	-
Cl. No.8.5, Table no. 6(iv)(Strap to outsole strength)	-	1	-
Cl. No.8.5, Table no. 6(v)("Attachment strength of back strap and Buckle/D-ring ")	-	1	-
Cl. No.8.5, Table no. 6(vi)("Attachment strength of elastic, limit of useful extension, percent")	-	1	-
Cl. No.8.5, Table no. 6(vii)("Attachment strength of back strap and velcro, N, Min (If, present)")	-	1	-
Cl. No.8.5, Table no. 6(viii)("Hydrolysis resistance, Cut growth after 150 000 flexes, mm, Max (Applicable for PU sole only)")	-	1	-
Cl. No.8.5, Table no. 6(ix)("Heel pull off strength, N, Min (Applicable for heel height 40 mm and above attached separately to the sandal/slipper)")	-	1	-
Cl. No.8.5, Table no. 6(x)("Inter layer bond strength, N/mm, (Applicable for multi-layer sole)")	-	1	-
Cl. No.8.5, Table no. 6(xi)("Slip Resistance, Coefficient of Friction (COF) (Not applicable for leather sole) (To be carried out on quarry tiles)")	-	1	-
Cl.9 Table-5 S.No 1, (iii) (Amendment No-1)(Abrasion resistance, mm/kcs)	-	1	-
Cl.8 - Table No 1 - Sl. No.-xv("Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988")	-	1	-
Cl.8 - Table No 1 - Sl. No.-xiv(pH- IS 1390:2022)	-	1	-
Cl.8 - Table No 1 - Sl. No.-xv("Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988")	-	1	-
Cl.8 - Table No 1 - Sl. No.-xiv(pH- IS 1390:2022)	-	1	-

19 Jan, 2027

-
Included w.e.f 14.01.2025 Exclusion : Cl. No.8.4,Table no. 4(iii) (Abrasion resistance)

11420

Conformity Testing Labs Pvt. Ltd. Unit 2 (A33)

8139626

IS 15844 : Part 1 (2023)

SPORTS FOOTWEAR PART -1 GENERAL PURPOSEFirst Revision

45000 View breakup
-

Clause No.	Exclusion	Remark
Cl No.4.1(Sampling and Conditioning)	-	We offer the package price for BIS Sample for mechanical test Rs. 45000/-.
Cl No.4.2(Construction)	-	We offer the package price for BIS Sample for mechanical test Rs. 45000/-.
Cl No.4.3(Whole Footwear)	-	We offer the package price for BIS Sample for mechanical test Rs. 45000/-.
4.3.2(Toe spring height)	-	We offer the package price for BIS Sample for mechanical test Rs. 45000/-.
4.3.3(Upper to Mid Sole/Out Sole Bond Performance)	-	We offer the package price for BIS Sample for mechanical test Rs. 45000/-.
4.3.4("Upper to Composite Sole Bond Performance (Applicable Only When the Sole is Composite)")	-	We offer the package price for BIS Sample for mechanical test Rs. 45000/-.
4.3.5(Out Sole to Mid Sole (Multilayer) Bond Performance)	-	We offer the package price for BIS Sample for mechanical test Rs. 45000/-.
4.3.6(Energy Absorption at Seat Region)	-	We offer the package price for BIS Sample for mechanical test Rs. 45000/-.
4.3.9(Slip Resistance)	-	We offer the package price for BIS Sample for mechanical test Rs. 45000/-.
Cl No.4.4 , Table No. 2 , i) , a)(Flexing resistance, Dry condition)	-	We offer the package price for BIS Sample for mechanical test Rs. 45000/-.
Cl No.4.4 , Table No. 2 , ii)(Tear strength (average force), Min, N)	-	We offer the package price for BIS Sample for mechanical test Rs. 45000/-.
Cl No.4.4 , Table No. 2 , i)(Breaking strength, N/mm, Min)	-	We offer the package price for BIS Sample for mechanical test Rs. 45000/-.
Cl No.4.4 , Table No. 2 , ii)(Elongation at break, percent Min)	-	We offer the package price for BIS Sample for mechanical test Rs. 45000/-.
Cl No.4.4 , Table No. 2 , iii)(Tear strength, N, Min For Fabric: For all other materials)	-	We offer the package price for BIS Sample for mechanical test Rs. 45000/-.
Cl No.4.4 , Table No. 2 , iv) , a)(Flexing resistance, Dry condition)	-	We offer the package price for BIS Sample for mechanical test Rs. 45000/-.
Cl No.4.4 , Table No. 2 , v) , a)(Water vapour permeability, mg/cm2h, Min)	-	We offer the package price for BIS Sample for mechanical test Rs. 45000/-.
Cl No.4.4 , Table No. 2 , vi)(Hydrolysis resistance)	-	We offer the package price for BIS Sample for mechanical test Rs. 45000/-.
Cl No.4.5 , Table No. 3 , i)(Tear strength, N, Min)	-	We offer the package price for BIS Sample for mechanical test Rs. 45000/-.
Cl No.4.5 , Table No. 3 , ii)(Abrasion resistance, cycles)	-	We offer the package price for BIS Sample for mechanical test Rs. 45000/-.
Cl No.4.5 , Table No. 3 , v) , b)("Water vapour coefficient, mg/cm2 , Min ")	-	We offer the package price for BIS Sample for mechanical test Rs. 45000/-.
Cl No.4.6 , Table No. 4 , i)(Thickness, mm, Min)	-	We offer the package price for BIS Sample for mechanical test Rs. 45000/-.
Cl No.4.6 , Table No. 4 , ii)(Flexing index, Min)	-	We offer the package price for BIS Sample for mechanical test Rs. 45000/-.
Cl No.4.6 , Table No. 4 , iii)(Abrasion resistance, at 400 cycles)	-	We offer the package price for BIS Sample for mechanical test Rs. 45000/-.
Cl No.4.6 , Table No. 4 , iv) , a)(Water Absorption, mg/cm2 , Min)	-	We offer the package price for BIS Sample for mechanical test Rs. 45000/-.
Cl No.4.6 , Table No. 4 , iv) , b)(Water Desorption, percent, Min)	-	We offer the package price for BIS Sample for mechanical test Rs. 45000/-.
Cl No.4.7, Table No. 5 , i)(Thickness, mm, Min)	-	We offer the package price for BIS Sample for mechanical test Rs. 45000/-.
Cl No.4.7, Table No. 5 , ii)(Abrasion resistance, cycles)	-	We offer the package price for BIS Sample for mechanical test Rs. 45000/-.
Cl No.4.7, Table No. 5 , iii) , a)(Water Absorption, mg/cm2 , Min)	-	We offer the package price for BIS Sample for mechanical test Rs. 45000/-.
Cl No.4.7, Table No. 5 , iii) , b)(Water Desorption, percent, Min)	-	We offer the package price for BIS Sample for mechanical test Rs. 45000/-.
Cl No.4.8 , Table No. 6 , i)(Abrasion resistance (Volume loss), mm3 , Max)	-	We offer the package price for BIS Sample for mechanical test Rs. 45000/-.
Cl No.4.8 , Table No. 6 , ii)("Flexing resistance Belt Method at 90 diameter Mandrel or Bennewart method, cut growth, Max")	-	We offer the package price for BIS Sample for mechanical test Rs. 45000/-.
Cl No.4.8 , Table No. 6 , iii)("Hydrolysis resistance, cut growth after 150 000 flexes, in mm, Max")	-	We offer the package price for BIS Sample for mechanical test Rs. 45000/-.
Cl No.4.9 , Table No. 7 , i)(Compression set, percent, Max)	-	We offer the package price for BIS Sample for mechanical test Rs. 45000/-.
Cl No.4.9 , Table No. 7 , ii)(Split tear strength, kg/25 mm, Min)	-	We offer the package price for BIS Sample for mechanical test Rs. 45000/-.
Cl No.4.9 , Table No. 7 , iii)(Heat shrinkage, percent, Max)	-	We offer the package price for BIS Sample for mechanical test Rs. 45000/-.
Cl No.4.10 , Table No. 8 , i)(First dry collapsing load, hardness, N, Min)	-	We offer the package price for BIS Sample for mechanical test Rs. 45000/-.
Cl No.4.10 , Table No. 8 , ii)(Resilience, percent, Min)	-	We offer the package price for BIS Sample for mechanical test Rs. 45000/-.
Cl No.4.10 , Table No. 8 , iii)(Moisture resistance, percent, Min)	-	We offer the package price for BIS Sample for mechanical test Rs. 45000/-.
Cl No.4.10 , Table No. 8 , iv) , a)(Initial dry area shape retention, percent, Min)	-	We offer the package price for BIS Sample for mechanical test Rs. 45000/-.
Cl No.4.10 , Table No. 8 , iv) , b)(Area shape retention after 10th collapse, dry, percent, Min)	-	We offer the package price for BIS Sample for mechanical test Rs. 45000/-.
Cl No.4.11 , Table No. 9 , i)(Peel strength, N/mm, Min)	-	We offer the package price for BIS Sample for mechanical test Rs. 45000/-.
Cl No.4.11 , Table No. 9 , ii)(Shear strength, kPa , Min)	-	We offer the package price for BIS Sample for mechanical test Rs. 45000/-.
Cl No.4.13 , Table No. 11 , i)(Breaking strength of lace, N, Min)	-	We offer the package price for BIS Sample for mechanical test Rs. 45000/-.
Cl No.4.13 , Table No. 11 , ii)(Lace tag strength, N, Min)	-	We offer the package price for BIS Sample for mechanical test Rs. 45000/-.
Cl No.4.13 , Table No. 11 , iii)(Lace to lace abrasion,)	-	We offer the package price for BIS Sample for mechanical test Rs. 45000/-.
Cl No.4.13 , Table No. 11 , v)(Strength of Buckle/Ski hook, N, Min)	-	We offer the package price for BIS Sample for mechanical test Rs. 45000/-.
Cl No.4.4 , Table No. 2 , i) , b)(Flexing resistance, Wet condition)	-	We offer the package price for BIS Sample for mechanical test Rs. 45000/-.
Cl No.4.4 , Table No. 2 , iii) , a)("Colour fastness rubbing (To and fro) Grey scale rate, Min , Dry: (rubbing) Rating: (Marring and staining) ")	-	We offer the package price for BIS Sample for mechanical test Rs. 45000/-.
Cl No.4.4 , Table No. 2 , iii) , b)("Colour fastness rubbing (To and fro) Grey scale rate, Min , Wet: (rubbing) Rating: (Marring and staining)")	-	We offer the package price for BIS Sample for mechanical test Rs. 45000/-.
Cl No.4.4 , Table No. 2 , iv) , a)(Water vapour permeability, mg/cm2h, Min)	-	We offer the package price for BIS Sample for mechanical test Rs. 45000/-.
Cl No.4.4 , Table No. 2 , iv) , b)(Water vapour coefficient, mg/cm2 , Min)	-	We offer the package price for BIS Sample for mechanical test Rs. 45000/-.
Cl No.4.4 , Table No. 2 , v)(Stitch tear strength (double hole), N/mm, Min)	-	We offer the package price for BIS Sample for mechanical test Rs. 45000/-.
Cl No.4.4 , Table No. 2 , v) , b)("Water vapour coefficient, mg/cm2 , Min ")	-	We offer the package price for BIS Sample for mechanical test Rs. 45000/-.
Cl No.4.4 , Table No. 2 , vii)(Bursting Strength, kg/cm2 , Min)	-	We offer the package price for BIS Sample for mechanical test Rs. 45000/-.
Cl No.4.5 , Table No. 3 , iii)("Colour fastness to rubbing (crocking), Grey scale rate with 10 rubs on dry or wet, Min")	-	We offer the package price for BIS Sample for mechanical test Rs. 45000/-.
Cl No.4.5 , Table No. 3 , iv)("Colour fastness to perspiration (contact method) Grey scale rate, Min")	-	We offer the package price for BIS Sample for mechanical test Rs. 45000/-.
Cl No.4.13 , Table No. 11 , vi)(Corrosion resistance)	-	We offer the package price for BIS Sample for mechanical test Rs. 45000/-.
Cl No . 5(MARKING AND PACKING)	-	We offer the package price for BIS Sample for mechanical test Rs. 45000/-.
Cl No . 4.14, Table no. 1 of IS 17011(iv)(Chromium (VI))	-	We offer the package price for BIS Sample for mechanical test Rs. 45000/-.
Cl No . 4.14, Table no. 1 of IS 17011(x)(pH)	-	We offer the package price for BIS Sample for mechanical test Rs. 45000/-.

05 Apr, 2027

-
Exclusion: Cl No . 4.14, Table no. 1 of IS 17011(i) (Allergenic and carcinogenic disperse dyes), Cl No . 4.14, Table no. 1 of IS 17011(ii) (Aromatic amines released from Azo dyes (each individual amine)), Cl No . 4.14, Table no. 1 of IS 17011(iii) (Aromatic amines released from Azo dyes (each individual amine)), Cl No . 4.14, Table no. 1 of IS 17011(v) (Dimethyl fumarate (DMFU)), Cl No . 4.14, Table no. 1 of IS 17011(vi) (Formaldehyde (free or released by partial hydrolysis)), Cl No . 4.14, Table no. 1 of IS 17011(vii) (Formaldehyde), Cl No . 4.14, Table no. 1 of IS 17011(viii) (Organotin compounds), Cl No . 4.14, Table no. 1 of IS 17011(ix) (PCP-TeCP-TriCP polychlorophenols), Cl No . 4.14, Table no. 1 of IS 17011(xi) (Phthalates (each individual phthalate)), Cl No . 4.14, Table no. 1 of IS 17011(xii) (Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB)), Cl.4.3.8 (washability)

11421

Planet Electro Labs Private Limited (407)

8174226

IS 10322 : PART 5 : SEC 3 (2012)

Luminaires: Part 5 particular requirements: Sec 3 luminaires for road and street lighting (First Revision)

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Marking)	-	1000	-
7.0(Construction)	-	7000	-
8.0(Creepage Distance and Clearances)	-	1000	-
9.0(Provision for earthing)	-	2000	-
10.0(Terminals)	-	2000	-
11.0(External & Internal Wiring)	-	2000	-
12.0(Protection against electric shock)	-	1000	-
13.0(Endurance Tests and Thermal Tests)	-	2000	-
14.0(Resistance to Dust & Moisture)	-	5000	-
15.0(Insulation Resistance and Electric Strength)	-	2000	-
16.0(Resistance to Heat , fire and tracking)	-	2000	-
17.0(Photometric Test)	-	18000	-

-
-

11422

National Test House (NR) - NTH, Ghaziabad

8101304

IS 4985 (2021)

UNPLASTICIZED PVC PIPES FOR POTABLE WATER SUPPLIES SPECIFICATION Fourth Revision

16000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.1(Colour)	-	500	-
10.1(Surface Finish)	-	500	-
7.2.1.1 Table3(Angle of taper (Note-1))	-	1000	-
10.7(Sulphated Ash Content)	-	3000	-
5(CLASSIFICATION OF PIPES)	-	1000	-
Cl-7.1(Mean out side Diameter (For less than or equal to 40 mm- Average of 8 , For higher diameters up to 110 mm average of 6))	-	1000	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Minimum))	-	1000	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Mamimum))	-	1000	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. Variation)	-	1000	-
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Minimum))	-	1000	-
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Maximum))	-	1000	-
7.1.1.2(DIMENSIONS-PIPE-Ovality (Maximum))	-	1000	-
7.1.2.1(DIMENSIONS-PIPE-Thickness(Minimum))	-	1000	-
7.1.2.1(DIMENSIONS-PIPE-Thickness(Maximum))	-	1000	-
7.1.2.1(DIMENSIONS-PIPE-Average Thickness)	-	1000	-
Cl- 7.2(Socket length (Take 4 reading & minimum will be reported))	-	1000	-
7.2.1(DIMENSIONS-Socket)	-	1000	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Minimum Length)	-	1000	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Minimum))	-	1000	-
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Maximum))	-	1000	-
7.2.1.2(a)-Table 5(DIMENSIONS-Sockets for elastomeric sealing ring joints-Minimum depth of engagement)	-	1000	-
7.2.1.2-Table 4(DIMENSIONS-Sockets for elastomeric sealing ring joints-Socket inner Diameter)	-	1000	-
8(SEALING RINGS)	-	1000	-
9.1(PIPE ENDS)	-	1000	-
10.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	1000	-
10.1.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	1000	-
10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity)	-	1000	-
10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test)	-	2000	-
10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature)	-	2000	-
10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density)	-	1000	-
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test))	-	5000	-
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)-for Integral Sealing Ring Sockets)	-	5000	-
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Integral Sealing Ring Sockets)	-	5000	-
11.1.1(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Plumbing pipes)	-	5000	-
11.2(Resistance to External Blows at 0°C)	-	2000	-
10.3(Effect on Water Test)	-	5000	-
6.1.2(PVC Resin)	-	2000	-
7.1.3(mean outside diameter, outside diameter at any point, and wall thickness of plumbing pipes)	-	2000	-
7.1.4(Length)	-	1000	-
6.1.1(VCM Content)	-	2000	-
7.2.1.2b(Maximum inner diameter of groove)	-	1000	-
13.1(Marking)	-	500	-
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test))	-	5000	-

26 Oct, 2028

-
Included w.e.f. 23.08.2024

11423

Central Power Research Institute (CPRI), Bangalore

6101024

IS 14697 (2021)

ac STATIC TRANSFORMER OPERATED WATTHOUR METERS CLASS 02 S AND 05 S AND VAR-HOUR METERS CLASS 02 S 05 S AND 10 S - SPECIFICATION First Revision

Type test

36750 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.5 & 12.7.6.3(a.c. voltage test)	-	2320	only Acceptance test
9.5, 12.7.6.4()	-	2120	Insulation test
11.1(Limits of Error Due to Variation of the Current)	-	14920	Both LOE balance and Unbalance mode
12.15(Interpretation of Test Results)	-	0	NA
11.6 & 12.14(Meter Constant)	-	2420	-
12.13 & 11.5(Starting Current)	-	2420	Star up test also included
11.4, 12.12(Test of No-Load Condition)	-	1210	-
11.7, 12.16(Repeatability of Error Test)	-	5040	-
9.1, 12.7.1(Test of Power Consumption)	-	6300	Both Voltage &Current circuit included

31 Dec, 2026

-
Included w.e.f 16.05.2024

11424

Planet Electro Labs Private Limited (407)

8174226

IS 10322 : Part 5 : Sec 2 (2012)

Luminaires: Part 5 particular requirements: Sec 2 recessed luminaires (First Revision)

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Marking)	-	1000	-
7(Construction)	-	2000	-
8(Creepage Distance and Clearances)	-	1000	-
9(Provision for earthing)	-	2000	-
10(Terminals)	-	2000	-
11(External & Internal Wiring)	-	2000	-
12(Protection against electric shock)	-	1000	-
13(Endurance Tests and Thermal Tests)	-	2000	-
14(Resistance to Dust and Moisture)	-	5000	-
15(Insulation Resistance and Electric Strength)	-	2000	-
16(Resistance to Heat , fire and tracking)	-	2000	-
17(Photometric Test)	-	18000	-

-
-

11425

Central Power Research Institute (CPRI), Bangalore

6101024

IS 13779 (2020)

ac STATIC WATTHOUR METERS CLASS 1 AND 2-Specefication

type test

11050 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12.7.6.3(ac high voltage test)	-	530	Only acceptance test-1Phase
12.7.6.3(ac high voltage test)	-	580	3-Phase
12.7.6.4(Insulation resistance test)	-	530	-
11.1(Limits of error due to variation of the current)	-	2520	-
11.6, 12.15(Meter Constant)	-	950	-
11.5, 12.14(Test of Starting Conditions)	-	950	-
12.13, 11.4(Test of No-Load Condition)	-	950	-
12.17, 11.7(Repeatability of Error Test)	-	2520	-
12.7.1, 9.1(Test of Power Consumption)	-	2100	-
12.7.6.3(ac high voltage test)	-	580	3-Phase
12.7.6.4(Insulation resistance test)	-	550	3-Phase
11.1(Limits of error due to variation of the current)	-	3730	3-Phase
11.6, 12.15(Meter Constant)	-	1210	3-Phase
11.5, 12.14(Test of Starting Conditions)	-	1210	3-phase
12.13, 11.4(Test of No-Load Condition)	-	1210	3-Phase
12.17, 11.7(Repeatability of Error Test)	-	2520	3-Phase
12.7.1, 9.1(Test of Power Consumption)	-	6300	3-Phase
11.1(Test on limits of error due to variation of current)	-	7460	3-Phase
12.7.6.3(ac high voltage test)	-	-	-
12.7.6.4(Insulation resistance test)	-	-	-
11.1(Limits of error due to variation of the current)	-	-	-
11.6, 12.15(Meter Constant)	-	-	-
11.5, 12.14(Test of Starting Conditions)	-	-	-
12.13, 11.4(Test of No-Load Condition)	-	-	-
12.17, 11.7(Repeatability of Error Test)	-	-	-
12.7.1, 9.1(Test of Power Consumption)	-	-	-
11.1(Test on limits of error due to variation of current)	-	-	-

31 Dec, 2026

-
Included w.e.f 16.05.2024

11426

Planet Electro Labs Private Limited (407)

8174226

IS 10322 : Part 5 : Sec 1 (2012)

Luminaires: Part 5 particular requirements: Sec 1 fixed general purpose luminaires (First Revision)

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Marking)	-	1000	-
7.0(Construction)	-	2000	-
8.0(Creepage Distance and Clearances)	-	1000	-
9.0(Provision for earthing)	-	2000	-
10.0(Terminals)	-	2000	-
12.0(Protection against electric shock)	-	1000	-
11.0(External & Internal Wiring)	-	2000	-
13.0(Endurance Tests and Thermal Tests)	-	2000	-
14.0(Resistance to Dust & Moisture)	-	5000	-
15.0(Insulation Resistance and Electric Strength)	-	2000	-
16.0(Resistance to Heat , fire and tracking)	-	2000	-
17.0(Photometric Test)	-	18000	-

-
-

11427

National Test House (WR) - NTH, Mumbai

7107604

IS 1293 (2019)

Plugs and socket - Outlets of rated Voltage up to and including 250 Volts and rated current up to and including 16 amperes - Specification (Third Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Ratings)	-	200	-
7(CLASSIFICATION)	-	200	-
8(MARKING)	-	100	-
9(CHECKING OF DIMENSIONS)	-	300	-
10(PROTECTION AGAINST ELECTRIC SHOCK)	-	200	-
11(PROVISION FOR EARTHING)	-	100	-
12(TERMINALS)	-	100	-
13(CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	300	-
14(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	300	-
15(INTERLOCKED SOCKET-OUTLETS)	-	0	-
16(RESISTANCE TO AGEING, TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	1000	-
17(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	500	-
18(OPERATION OF EARTHING CONTACTS)	-	300	-
19(TEMPERATURE RISE)	-	1500	-
20(BREAKING CAPACITY)	-	1500	-
21(NORMAL OPERATION)	-	2500	-
22(FORCE NECESSARY TO WITHDRAW THE PLUG)	-	400	-
23(FLEXIBLE CABLES AND THEIR CONNECTION)	-	300	-
24(MECHANICAL STRENGTH)	-	500	-
25(RESISTANCE TO HEAT)	-	500	-
26(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	300	-
27(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	200	-
28(RESISTANCE OF INSULATING MATERIAL TO ABNORMAL HEAT, TO FIRE AND TO TRACKING)	-	500	-
29(RESISTANCE TO RUSTING)	-	200	-
30(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES)	-	500	-
11.5(PROVISIONS FOR EARTHING)	-	0	-
11.6(PROVISIONS FOR EARTHING)	-	0	-
12.1.1(TERMINALS)	-	0	-
12.1.2(TERMINALS)	-	0	-
12.2.1(TERMINALS)	-	0	-
12.2.3(TERMINALS)	-	0	-
12.2.4(TERMINALS)	-	0	-
12.2.5(TERMINALS)	-	0	-
12.2.6(TERMINALS)	-	0	-
12.2.7(TERMINALS)	-	0	-
12.2.8(TERMINALS)	-	0	-
12.2.9(TERMINALS)	-	0	-
12.2.10(TERMINALS)	-	0	-
12.2.11(TERMINALS)	-	0	-
12.3.1(TERMINALS)	-	0	-
12.3.2(TERMINALS)	-	0	-
12.3.3(TERMINALS)	-	0	-
12.3.4(TERMINALS)	-	0	-
12.3.5(TERMINALS)	-	0	-
12.3.6(TERMINALS)	-	0	-
12.3.7(TERMINALS)	-	0	-
12.3.8(TERMINALS)	-	0	-
12.3.9(TERMINALS)	-	0	-
12.3.10(TERMINALS)	-	0	-

24 Jul, 2025

-
-

11428

National Test House (WR) - NTH, Mumbai

7107604

IS 12823 (2015)

Prelaminated Particle Boards from Wood and other Lignocellulosic Material - Specification ( First Revision )

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 7(Finish)	-	1000	-
Cl 8(Dimensions & Tolerances)	-	500	-
Cl 10.2(Test For Density)	-	500	-
Cl 10.3(Test For Moisture Content)	-	1000	-
Cl 10.4(For Water AbsorptionTest )	-	1000	-
Cl 10.5(For Swelling in water Test )	-	1000	-
Cl 10.6(Tesr For Modulus Of Elasticity & Mudulus Of Rupture)	-	2500	-
Cl 10.7(For Determination of Tensile Strength Perpendicular to Surface)	-	2000	-
Cl 10.8(For Determination of Tensile Strength Perpendicular to Surface After Ageing Test)	-	2000	-
Cl 10.9(Test For Screw Withdrawal Strength)	-	1500	-
Cl 10.10 & Annex C( Test For Abrasion Resistance)	-	5000	-
Cl 10.11 & Annex D( Test For Resistance to Steam)	-	500	-
Cl 10.12 & Annex E( Test For Crack Resistance)	-	500	-
Cl 10.13 & Annex F( Test For Resistance to Cigarette Burn)	-	500	-
Cl 10.14 & Annex G( Test For Resistance to Stain)	-	1500	-

24 Jul, 2025

-
-

11429

National Test House (WR) - NTH, Mumbai

7107604

IS 1554 : Part 1 (1988)

Specification for pvc insulated (Heavy Duty) electric cables: Part 1 for working voltages up to and including 1100 v (Third Revision)

22500 View breakup
-

Clause No.	Exclusion	Remark
15.1 a) 1)(Tests on conductor : Annealing test ( for copper ))	-	-
15.1 a) 2)(Tensile test (for aluminium) - Before stranding )	-	-
15.1 a) 3)(Tests on conductor : Wrapping test ( for aluminium ))	-	-
15.1 a) 4)(Tests on conductor : Conductor resistance test)	-	-
13.3(Armouring : Dimensions -Wire Diameter)	-	-
13.3(Armouring : Dimensions -Formed wire )	-	-
13.5.1(ARMOURING : Resistance)	-	-
13.5.2(ARMOURING : Resistance)	-	-
13.6 a)(ARMOURING: Tensile Strength)	-	-
13.6 b)(ARMOURING: Elongation )	-	-
13.6 c)(ARMOURING: Torsion Test (For round wire ) )	-	-
13.6 d)(ARMOURING: Winding Test(For formed wire))	-	-
13.6 e)(ARMOURING: Uniformity of zinc coating)	-	-
13.6 f)(ARMOURING: Mass of zinc coating )	-	-
13.6 g)(ARMOURING: Resistivity)	-	-
15.1.e(Insulation resistance Test- Insulation resistance At Maximum rated temperature temperature)	-	-
15.1 e)(Insulation resistance test : IR Constant )	-	-
15.1 f)(High voltage test ( water immersion test ))	-	-
15.1 g)(High voltage test at room temperature)	-	-
16.4(Flammability Test)	-	-
9.2(INSULATION : Thickness of Insulation)	-	-
9.3(INSULATION :Tolerance on Thickness of Insulation)	-	-
9.4(INSULATION : Application of Insulation)	-	-
12.3(INNER SHEATH :Thickness of Inner Sheath)	-	-
12.3.1(INNER SHEATH :Thickness of Inner Sheath)	-	-
14.4.1(Thickness of Outer Sheath : Unarmowed Cables)	-	-
14.4.2(Thickness of Outer Sheath : Armoured Cables)	-	-
15.1 d)1)(Phyaical tests for insulation : Tensile Test)	-	-
15.1 d)1)(Phyaical tests for insulation : Elongation )	-	-
15.1 d)2)(Phyaical tests for insulation- Ageing in air Oven : Tensile Test)	-	-
15.1 d)2)(Phyaical tests for insulation - Ageing in air oven : Elongation )	-	-
15.1 d)2)(Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-	-
15.1 d)2)(Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-	-
15.1 d)3)(Phyaical tests for insulation : Shrinkage )	-	-
15.1 d)3)(Phyaical tests for insulation : Shrinkage - Crack observed )	-	-
15.1 d)3)(Phyaical tests for Sheath : Shrinkage )	-	-
15.1 d)3)(Phyaical tests for Sheath : Shrinkage - Crack observed )	-	-
15.1 d)4)(Hot deformation : Insulation )	-	-
15.1 d)4)(Hot deformation : Sheath )	-	-
15.1 d)5)( Loss of mass in air oven- Insulation )	-	-
15.1 d)5)( Loss of mass in air oven- sheath )	-	-
15.1 d)6)(Heat shock test- Insulation )	-	-
15.1 d)6)(Heat shock test- sheath )	-	-
15.1 d)7)(Thermal stability- insulation )	-	-
15.1 d)7)(Thermal stability- Sheath )	-	-
15.4 a)(Cold bend test- Insulation ( Optional test))	-	-
15.4 a)(Cold bend test- Sheath ( Optional test))	-	-
15.4 b)(Cold impact test- Insulation ( Optional test))	-	-
15.4 b)(Cold impact test- Sheath ( Optional test))	-	-
15.4 c)(Armour resistance test ( for other than mining cables ).- Optional test )	-	-
16.5(Oxygen Index Test)	-	-
16.6(Flame Retardance Test on Single Cables)	-	-
16.7(Flame Retardance Test on Bunched Cables)	-	-
16.9(Test for Halogen Acid Gas Evolution)	-	-
16.1(Temperature Index)	-	-
16.4(Flammability Test- Un affected portion)	-	-
16.4(Flammability Test- Period of Burning)	-	-
3.1(MATERIALS : CONDUCTOR)	-	-
4.1.1(INSULATION : General Purjose Insulaiion)	-	-
4.1.2(INSULATION : Heat Resisting Insulation)	-	-
5.1(MATERIALS : FILLER AND INNER SHEATH)	-	-
5.2(MATERIALS : FILLER AND INNER SHEATH)	-	-
6.1(MATERIALS : ARMGURING)	-	-
6.2(MATERIALS : ARMGURING)	-	-
7.1.1(OUTER SHEATH : For Cables with General Purpose InsuIafion)	-	-
7.1.2(OUTER SHEATH : For Cables with Heat Resisting InsuIalion)	-	-
8.1(CONSTRUCTION : CONDUCTOR)	-	-
8.2(CONSTRUCTION : CONDUCTOR)	-	-
10.1(CORE IDENTIFICATION)	-	-
10.2(CORE IDENTIFICATION)	-	-
10.3(CORE IDENTIFICATION)	-	-
10.3.1(Arrangement of Marking)	-	-
11.1(LAYING UP OF CORES)	-	-
11.2(LAYING UP OF CORES)	-	-
12.1(INNER SHEATH)	-	-
12.2(INNER SHEATH)	-	-
13.1.1(ARMOURING : Application)	-	-
13.1.2(Armouring: Coverage )	-	-
13.1.3(ARMOURING : Direction of lay )	-	-
13.1.4(ARMOURING : Application)	-	-
13.2(ARMOURING : Type of Armour)	-	-
13.2.1(ARMOURING : Type of Armour)	-	-
13.4(ARMOURING : Joints)	-	-
14.1(OUTER SHEATH)	-	-
14.2(OUTER SHEATH)	-	-
14.3(OUTER SHEATH : Colour )	-	-
16.1(DETAILS OF TESTS : General)	-	-
16.2(DETAILS OF TESTS : High Voltage Test at Room Temperature)	-	-
16.3.1(High Voltage Test ( Water Immersion Test ) : a.c. Test)	-	-
16.3.2(High Voltage Test ( Water Immersion Test ) : d.c. Test)	-	-
17.1(IDENTIFICATION : Manufacturer’s Identification)	-	-
17.2(IDENTIFICATION : Cable Identification)	-	-
17.2.1(IDENTIFICATION : Cable Identification)	-	-
17.3(IDENTIFICATION : Cable Code)	-	-
9.3(Minimum Thickness of Reduce core insulation)	-	-
9.2(Thickness of Reduce core insulation)	-	-
3.1 Table 2 IS 8130(Number of wires in the conductor)	-	-

24 Jul, 2025

-
-

11430

National Test House (WR) - NTH, Mumbai

7107604

IS 303 (1989)

Plywood for General Purposes -

MR/BWR

7350 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11.3(Moisture Content - Part 1 of IS 1734)	-	1000	-
11.2.1(Glue Adhesion - Water resistance test - 11.2.1.1 [for MR Grade])	-	2000	-
11.2.2(Glue Adhesion - Mycological test - 11.2.2, Part 7 of IS 1734 [for MR Garde only])	-	1500	-
8(Dimensions & Tolerances - Edge Straightness - Annexure C)	-	2000	-
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-	1500	-
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-	1500	-

24 Jul, 2025

-
-

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number