BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15361 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

11461

INDIAN TESTING LABORATORY PRIVATE LIMITED, GREATER NOIDA

8171306

IS 14735 (1999)

Unplasticized Polyvinyl Chloride (UPVC) Injection Moulded Fittings for Soil and Waste Discharge System for Inside and Outside Buildings Including Ventilation and Rain Water System -

Group I & II

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
19(Marking)	-	250	-
3(Type of Fitting)	-	250	-
4(Size Designation)	-	250	-
5(Colour of fittings)	-	250	-
7.1,Table 1(Wall thickness)	-	250	-
7.2 ,Table 2&3(Socket Dimensions)	-	500	-
7.3(Dimensions of waste trap(Nahani Trap)	-	500	-
8(Sealing Rings)	-	500	-
10(Workmanship)	-	500	-
11(Design requirements)	-	500	-
11.1(Solvent cement type or Rubber ring type)	-	500	-
11.2(Socket and spigot configeration)	-	500	-
11.4,Table 5(Vent cowl)	-	500	-
11.5,Table 6(Pipe Clips)	-	250	-
12(Physical test requirements)	-	250	-
12.1(Visual appearance)	-	250	-
12.2(Stress relief test)	-	1500	-
12.3(Vicat softening tempewrature)	-	1500	-
Cl.13, IS 12235 (P-7)-2004, (Resistance to Sulphuric Acid)	-	2500	-
Cl.15, Annex B(Sulphated Ash Content)	-	1500	-
16.1(Impact test)	-	1500	-
Cl.14, Annex A(Titanium Di-Oxide Content)	-	1500	-
17(Watet tightness of joint)	-	1500	-
7.4(Chamfer)	-	250	-
11.3(Access Openings)	-	250	-
Table 4(Dimension of Access Openings)	-	250	-

15 Aug, 2028

-
-

11462

INDIAN TESTING LABORATORY PRIVATE LIMITED, GREATER NOIDA

8171306

IS 694 (2010)

Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 450/750 v (Fourth Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
13(Cable code)	-	100	-
10.9(Additional ageing test (OU cables only) -HV test (at 60±3oC))	-	1000	-
10.4(Flammability test- Unaffected portion)	-	750	-
10.4(Flammability test-Burning after flame removal)	-	250	-
table 1 e) 3) (IR constant- max. Temp)	-	1000	-
table 1 e) 3) (IR constant- Room temp )	-	1000	-
table 1 e) 3) (Volume Resistivity - Maximum temp)	-	750	-
table 1 e) 3) (Volume Resistivity - Room temp )	-	1200	-
10.2(HV (room temperature))	-	1500	-
10.1(HV (water immersion))	-	1200	-
10.8(Smoke density rating)	-	2500	-
10.6(Halogen evolution)	-	1500	-
10.7(Temperature index)	-	2500	-
10.5(Oxygen index)	-	1500	-
Table 1 iii) d) 9)(Cold impact for sheath)	-	1000	-
Table 1 iii) d) 8)(Cold bend for sheath)	-	1000	-
Table 1 iii) c) 9)(Cold impact for insulation)	-	1000	-
Table 1 iii) c) 8)(Cold bend for insulation)	-	1000	-
Table 1(Category Code)	-	500	-
Table 1 iii) d) 7)(Thermal stability- Sheath )	-	750	-
Table 1 iii) c) 7)(Thermal stability- Insulation )	-	750	-
Table 1 iii) d) 6)(Hot deformation -Indentation depth - Sheath )	-	750	-
Table 1 iii) c) 6)(Hot deformation - Indentation depth- Insulation)	-	750	-
Table 1 iii) d) 5)(Heat shock-Sheath )	-	750	-
Table 1 iii) c) 5)(Heat shock-Insulation )	-	750	-
Table 1 iii) d) 4)(Cracks Observed)	-	500	-
Table 1 iii) d) 4)(Shrinkage- Sheath )	-	750	-
Table 1 iii) c) 4)(Cracks Observed)	-	500	-
Table 1 iii) c) 4)(Shrinkage-Insulation)	-	750	-
Table 1 iii) d) 2)(Loss of mass- Sheath )	-	1000	-
Table 1 iii) c) 2)(Loss of mass- Insulation )	-	1000	-
Table 1 iii) d) 3)(Sheath- Elongation variation)	-	500	-
Table 1 iii) d) 3)(Sheath- TS variation)	-	1000	-
Table 1 iii) d) 3)(Sheath- Elongation (After ageing))	-	500	-
Table 1 iii) d) 3)(Sheath- Tensile strength (After ageing))	-	1000	-
Table 1 iii) d) 1)(Sheath- Elongation (Without ageing))	-	500	-
Table 1 iii) d) 1)(Sheath -Tensile strength (Without ageing))	-	1000	-
Table 1 iii) c) 3)(Elongation variation)	-	500	-
Table 1 iii) c) 3)(TS variation)	-	250	-
Table 1 iii) c) 3)(Elongation (After ageing))	-	500	-
Table 1 iii) c) 3)(Tensile strength (After ageing))	-	1000	-
(Cl. 18.1.4) (Cl. 19.1.5) (Cl. 20.1.4) (Cl. 22.1.4)(Colour of Sheath)	-	500	-
8.3(Thickness of Sheath)	-	500	-
5.3(Thickness of Insulation)	-	500	-
9.1(Ovality)	-	500	-
9(Overall dimensions)	-	500	-
10.11(Per sulphate test (for tinned Cu cable only))	-	750	-
4.2(Conductor resistance test)	-	1000	-
4.1(Wrapping test (for Al))	-	500	-
4.1(Tensile test (for Al)- After Stranding)	-	1000	-
4.1(Tensile test (for Al)-Before Stranding)	-	1000	-
4.1(Annealing test (for copper))	-	1000	-
(Cl.16.1) (Cl.19.1)(Conductor- Diameter )	-	1000	-
(Cl. 18.1.3) (Cl. 19.1.4) (Cl. 20.1.3) (Cl. 21.1.3) (Cl. 22.1.3)(Assembly of cores )	-	1000	-
12(CONSTRUCTION Core Identification)	-	500	-
8.1(Sheath Material )	-	500	-
Table 4(Copper purity test)	-	1500	-
11.2(Legibility)	-	100	-
11.1(Durability)	-	100	-
11(Identification)	-	100	-

15 Aug, 2028

-
-

11463

INDIAN TESTING LABORATORY PRIVATE LIMITED, GREATER NOIDA

8171306

IS 383 (2016)

Coarse and Fine Aggregate for Concrete - Specification (Third Revision)

Group-I, Group-II

8200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.4.1 (a)(mechanical properties- Aggregate Crushing Value/Ten Percent Fines Value)	-	500	-
5.4.2(a)( Aggregates Impact Value)	-	500	-
6.1-Table 7(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Nominal Size of aggregate)	-	500	-
6.1-Table 7(i)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 80 mm sieve )	-	500	-
6.1-Table 7(ii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 63 mm sieve )	-	500	-
6.1-Table 7(iii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 40 mm sieve )	-	500	-
6.1-Table 7(iv)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 20 mm sieve )	-	100	-
6.1-Table 7(v)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 16 mm sieve )	-	100	-
6.1-Table 7(vi)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 12.5 mm sieve )	-	100	-
6.1-Table 7(vii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 10 mm sieve )	-	100	-
6.1-Table 7(viii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 4.75 mm sieve )	-	100	-
6.1-Table 7(ix)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 2.36 mm sieve )	-	100	-
6.3-Table 9(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Grading Zone)	-	100	-
6.3-Table 9(i)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 10mm Sieve )	-	500	-
6.3-Table 9(ii)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 4.75mm Sieve )	-	500	-
6.3-Table 9(iii)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 2.36mm Sieve )	-	500	-
6.3-Table 9(iv)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 1.18mm Sieve )	-	100	-
6.3-Table 9(v)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 600µm Sieve )	-	100	-
6.3-Table 9(vi)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 300µm Sieve )	-	100	-
6.3-Table 9(vii)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 150µm Sieve )	-	100	-
5.7-Table-3-(v) IS: 2386 (P-3)(specific gravity(fine aggregate))	-	400	-
5.7-Table-3-(Iv) IS: 2386 (P-3)(Water absorption (fine aggregate))	-	400	-
5.7-Table-3-(III) IS:14959 (P-2)(Water soluble chloride content (fine aggregate))	-	1000	-
5.7-Table-3-(II) IS:4032(Total sulphate content (fine aggregate))	-	1000	-
5.6-IS: 2386 (P-7)(Alkali Aggregate Reaction (fine aggregate))	-	1500	-
5.5-IS: 2386 (P-5)(Soundness (fine aggregate))	-	1200	-
5.2- TABLE-2- (Note-4) IS-2386 (P-2)(Organic impurities (fine aggregate))	-	500	-
5.2- TABLE-2- (vi) IS-2386 (P-2)(Total deleterious material (fine aggregate))	-	2250	-
5.2- TABLE-2- (ii) IS-2386 (P-2)(Clay lumps (fine aggregate ))	-	1000	-
5.2- TABLE-2- (i) IS-2386 (P-2)(Coal and Lignite (fine aggregate ))	-	1000	-
5.7-Table-3-(v) IS: 2386 (P-3)(specific gravity(coarse aggregate))	-	400	-
5.7-Table-3-(Iv) IS: 2386 (P-3)(Water absorption (coarse aggregate))	-	400	-
5.7-Table-3-(III) BN EN: 1744(Water soluble chloride content (coarse aggregate))	-	1000	-
5.7-Table-3-(II) BN EN: 1744(Total sulphate content (coarse aggregate))	-	1000	-
5.6-IS: 2386 (P-7)(Alkali Aggregate Reaction (coarse aggregate))	-	1500	-
5.5-IS: 2386 (P-5)(Soundness (coarse aggregate))	-	1200	-
5.3-IS: 2386 (P-1)(Combined elongation & flakiness index (coarse aggregate))	-	750	-
5.2- TABLE-2- (vi) IS-2386 (P-2)(Total deleterious material (coarse aggregate))	-	2250	-
5.2- TABLE-2- (iii) IS-2386 (P-1)(Material fine aggregater than 75 micron (coarse aggregate))	-	500	-
7.2(Bulking Of Fine Aggregate)	-	1000	-
5.2 (5.2.2, 5.2.1, 5.2.3, shale table-2 ) (Deleterious material (Clay lumps, coal & lignite, material finer than 75 micron IS sieve, Soft fragments,shale))	-	2000	-
5.4.3(a)( Aggregate Abrasion Value)	-	500	-
5.4.3(b)( Aggregate Abrasion Value)	-	500	-

15 Aug, 2028

-
Included w.e.f. 09.12.2022. Only for aggregrates from natural resources.

11464

INDIAN TESTING LABORATORY PRIVATE LIMITED, GREATER NOIDA

8171306

IS 15658 (2021)

Concrete Paving Blocks - Specification ( First Revision )

M-30, M-35, M-40, M-50 and M-55

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 50 cycles)	-	2500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 25 cycles)	-	2500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 10 cycles)	-	2500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Cumulative Weight losses of specimen after 10, 25 & 50 cycles)	-	2500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 50 cycles)	-	2500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 25 cycles)	-	2500	-
Clause 7.3, Annex G(Average Breaking Load)	-	2500	-
Clause 7.3, Annex G(Individual Breaking Load)	-	1000	-
Clause 7.3, Annex F(Average Failure Load per unit Length)	-	1000	-
Clause 7.3, Annex F(Individual Failure Load per unit Length)	-	1000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (v) b)(Average Flexural strength )	-	2500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (v) a)(Indivdual Flexural strength (i))	-	1000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) b)(Average Tensile splitting strength )	-	1000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) ii)(Wet Abrasion resistance (Average of three test specimens))	-	2000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) i)( Indivdual Wet Abrasion Resistance )	-	2000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) ii)(Dry Abrasion resistance (Average of three test specimens))	-	2000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) i)( Indivdual Dry Abrasion Resistance )	-	2000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) b)(Compressive strength (Average of eight test specimens))	-	2500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) a)(Indivdual Compressive strength (i))	-	1000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (i) b)(Water absorption (Average of three test specimens))	-	1500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (i) a)( Indivdual Water absorption)	-	1500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (ix)(Deviation from squareness)	-	1000	-
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Indivdual Ratio of wearing face area and Plan area (Asw/Asp))	-	500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Indivdual Plan Area (Asp))	-	500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Indivdual Thickness of wearing Layer)	-	750	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Depth)	-	750	-
Clause 7.2, Table No. 2, SI No. (iv) (Indivdual Aspect Ratio, L/Th)	-	500	-
Clause 7.2, Table No. 2, SI No. (iv) (Aspect Ratio, L/Th)	-	500	-
Clause 7.2, Table No. 2, SI No. (iii) (Thickness, Th)	-	500	-
Clause 7.2, Table No. 2, SI No. (iii) (Indivdual Thickness, Th)	-	500	-
Clause 7.2, Table No. 2, SI No. (ii) (Indivdual Length, L)	-	500	-
Clause 7.2, Table No. 2, SI No. (ii) (Length, L)	-	500	-
Clause 7.2, Table No. 2, SI No. (i) (Indivdual Width, W)	-	500	-
Clause 7.2, Table No. 2, SI No. (i) (Width, W)	-	500	-
Clause 6.3 (Bonding and Delamination between the layers of paver blocks)	-	500	-
Clause 7.1.3 (Colour and Texture)	-	250	-
Clauses 7.1.2 & 9.1.2 (Visual Inspection)	-	250	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Individual Width - Lower)	-	250	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Average Width -Lower)	-	250	-
10(Marking)	-	500	-
cl.5(Cement)	-	8000	-
5.2(Mineral Admixture)	-	5000	-
5.3(Chemical Admixtures)	-	3000	-
5.4(Coarse and Fine Aggregates)	-	6000	-
5.5(Pigments)	-	3000	-
5.6(Water)	-	2500	-

15 Aug, 2028

-
Amendment No.1 Included w.e.f. 21.02.2023

11465

INDIAN TESTING LABORATORY PRIVATE LIMITED, GREATER NOIDA

8171306

IS 17425 (2020)

Irrigation Equipment - Quick Coupled Polyethylene Pipes and Fittings for Sprinkler Irrigation Systems - Specification

class 1,2,3,4 size 40-200mm

32000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Dimensions of pipe - i) Outside diameter)	-	500	-
5(Dimensions of pipe - ii) Wall thickness minimum)	-	500	-
6(Visual Appearance)	-	500	-
7.1(Hydraulic Characteristics - Quality test)	-	7500	-
7.1(Hydraulic Characteristics - Acceptance test)	-	2500	-
7.2(Reversion Test)	-	1500	-
7.3(Tensile Test- i) Tensile Strength)	-	1500	-
7.3(Tensile Test - ii)Elongation at Break)	-	1000	-
7.4(Fusion Compatibility Test- a) Quality test)	-	7500	-
7.4(Fusion Compatibility Test- b) Acceptance test)	-	2500	-
7.5(Density)	-	1000	-
7.6(Melt Flow Rate)	-	1500	-
4.2(Carbon black- a)carbon content)	-	1500	-
4.2(Carbon black- b) Dispersion of carbon black)	-	1500	-
5.1.2(Ovality)	-	500	-
4.3(Anti-oxidant)	-	2500	-
3(CLASSIFICATION OF PIPES)	-	250	-
6.1.3(Weldability Test- a) Quality test)	-	7500	-
6.1.3(Weldability Test- b) Acceptance test)	-	2500	-
7.2.1(Visual and Workmanship Requirement)	-	500	-
4.2(Metallic Couplers)	-	1500	-

15 Aug, 2028

-
Except- Anti-Oxidant test (Cl.4.3)

11466

INDIAN TESTING LABORATORY PRIVATE LIMITED, GREATER NOIDA

8171306

IS 4984 (2016)

Polyethylene pipes for water supply - Specification (Fifth Revision)

PE 63, PE 80 and PE 100

20500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.10(Slow Crack Growth Rate)	-	2500	-
8.9 table-6(Elongation at Break)	-	1000	-
8.8(Tensile Strength for Butt-fusion)	-	1500	-
8.7(Density)	-	1000	-
8.5 (Oxidation Induction Time)	-	2500	-
8.4( Melt Flow Rate)	-	1500	-
8.2(Longitudinal Reversion Test)	-	1500	-
8.1.2 table -5(Internal Pressure Creep Rupture Test of Pipe Joints)	-	5000	-
8,/8.1/8.1.1 table-5(PERFORMANCE REQUIREMENTS / Hydraulic Characteristics/ Internal Pressure Creep Rupture Test of Pipe)	-	10000	-
7.4.1.2(Ovality)	-	500	-
Cl-7.4(Mean Outside Diameter (For upto 50 mm take 8 reading, above 50mm take 6 reading & average will be reported))	-	1000	-
7.2(Length)	-	500	-
6.2.1(6.1.1 Identification Stripes)	-	500	-
6.2(Colour)	-	500	-
8.6(Overall migration)	-	2500	-
8.3(Carbon black)	-	1500	-
5.4(Anti oxydent)	-	2500	-
5.3(e)(Carbon Black Master Batch)	-	1500	-
5.3(d)(Carbon Black Master Batch)	-	1500	-
5.3(c)(Carbon Black Master Batch)	-	1500	-
5.3(b)(Carbon Black Master Batch)	-	1500	-
5.3 (a)(Carbon Black Master Batch)	-	1500	-
5.2(Polyethylene Resin)	-	1500	-
5, 5.1 table-1(MATERIALS)	-	1500	-
5.2(Density)	-	1000	-
5.2(MFI @ 1900C/5.0 Kg)	-	1500	-
5.2(Volatile matter Content)	-	1000	-
5.3(Toluene Extract)	-	1000	-
Clause 7.3(Coiling)	-	500	-
7.1(Visual Appearance)	-	250	-
Table-2 (iii, iv)(Thermal Stability (Oxidation Induction Time), Volatile Matter)	-	2500	-

15 Aug, 2028

-
Except- Anti-oxidant test (Cl.5.4)

11467

BIS, Eastern Regional Laboratory (ERL)

None

IS 6664 (1992)

Rubber microcellular sheets for soles and heels - Specification (First Revision)

For all sizes

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.4.1.3 and 8.3,Table 1 ii (Thickness)	-
Cl.4 Cl.4.1.3 And 8.3,Table1, i) (Relative density)	-
Cl.4.1.3 And 8.3,Table1 (ii) Hardness, Shore A durometer min)	-
Cl.4.1.3 And 8.3,Table1 (iv) Compression set at constant stress percent, Max)	-
Cl.4 Cl.4.1.3 And 8.3,Table1, v) (Split tear strength, kg,Min)	-
Cl.4.1.3 And 8.3,Table 1 vi (Heat shrinkage test at 100±1°C for 1 hour max)	-
Cl.4 Cl.4.1.3 And 8.3,Table 1, viii) (Flexing resistance: Maximum cut growth at 50 000 cycles)	-
Cl.4.1.3 and 8.3,Table 1 vii (Abrasion resistance at applied force of 5 N)	-
4.2 (Flexing resistance )	-
4.2 (Water absorption)	-
4.2 (Heat Shrinkage )	-
4.2 (Shrinkage at room temp)	-
4.2 (Split tear strength)	-
4.2 (Compression set)	-
4.2 (Hardness (Shore A))	-
4.2 (Density )	-
4.2 (Size & Thickness )	-
4, Cl.4.1,4.1.1,4.1.2 (Requirements)	-
Cl.4.1.3 And 8.3,Table1, iii) (Hardness, Shore A durometer min)	-
Cl.4 Cl.4.1.3 And 8.3,Table1, iii) (Change in Hardness after ageing at 100±1°C for 24hr)	-
Cl.4 Cl.4.1.3 And 8.3,Table1, iv) (Compression set at constant stress percent, Max)	-
Cl.4 Cl.4.1.3 And 8.3,Table1, vi) (Room Temperature shrinkage at 27±2°C for 2weeks, percent, Max)	-
Cl.4 Cl.4.1.3 And 8.3,Table 1, vi) (Heat shrinkage test at 100±1°C for 1 hour max)	-
Cl.4 Cl.4.1.3 And 8.3,Table1, viii) (Water absorption , percent by mass, Max)	-
5, 5.1 (Marking)	-
6, 6.1 (Packing)	-
"Cl.4 ,Cl.4.1,4.1.1,4.1.2 (Requirements ")	-
Cl.4.1.3 And 8.3,Table1 (i) Relative density)	-
Cl.4.1.3 And 8.3,Table1 (iii) Change in Hardness after ageing at 100±1°C for 24hr)	-
Cl.4.1.3 And 8.3,Table1 (vi) Room Temperature shrinkage at 27±2°C for 2weeks, percent, Max)	-
Cl.4.1.3 And 8.3,Table1 (viii)Water absorption , percent by mass, Max)	-
Cl.4.1.3 And 8.3,Table1 (ix)Flexing resistance)	-
5, 5.1 (Marking)	-
6, 6.1 (Packing)	-

-
Complete

11468

BIS, Central Laboratory (CL)

None

IS 13893 (1994)

Polyurethane soles semirigid - specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.2 (Thickness )	-
4.3 (Elongation at break)	-
4.3 (Tensile Strength )	-
4.2 (Thickness )	-
4.1 (Design)	-
4.3 (Relative density )	-
4.3 (Hardness Shore(A))	-
4.3 (Abrasion Resistance)	-
4.3.1 Table 1 iv) (Amendment 2) (Flexing Resistance, Bennewart method)	-
4.3.1 Table 1 v) (Amendment 2) (Hydrolysis Resistance, cut growth after 150000 flexes)	-
4.3.1 Table 1 viii) (Amendment 2) (Tear Strength (average force))	-
4.3.1 Table 1 vii) (Amendment 2) (Elongation at break)	-

-
Mechanical (Complete) Except :i) Tensile strength (Cl 4.3.1) ii) Elongation at break (Cl 4.3.1) iii) Tear strength (Cl 4.3.1) Material requirement :3 pair of complete footwear along with raw material with specified requirement as per ISs and For abrasion resistance to outsole raw material of 10 mm min. thickness required

11469

BIS, Eastern Regional Laboratory (ERL)

None

IS 13893 (1994)

Polyurethane soles semirigid - specification

For all sizes

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Design)	-
4.2 (Thickness )	-
4.3 (Relative density )	-
4.3 (Hardness Shore(A))	-
4.3 (Tensile Strength )	-
4.3 (Elongation at break)	-
4.3 (Abrasion Resistance)	-
4.3 (Flexural strength )	-
4.3 (Ross Flex test)	-
4.3.2 (Ageing test)	-
4.3.1 Table 1 vi) (Amendment 2) (Tensile Strength)	-
4.3.1 Table 1 i) (Amendment 2) (Relative Density)	-
4.3.1 Table 1 iii) (Amendment 2) (Abrasion Resistance at applied force of 10 N)	-
4.3.1 Table 1 v) (Amendment 2) (Hydrolysis Resistance, cut growth after 150000 flexes)	-
4.3.1 Table 1 viii) (Amendment 2) (Tear Strength (average force))	-
4.3.1 Table 1 iv) (Amendment 2) (Flexing Resistance, Bennewart method)	-
4.2 (Amendment 2) (Thickness)	-
4.3.1 Table 1 vii) (Amendment 2) (Elongation at break)	-
4.3.1 Table 1 ii) (Amendment 2) (Hardness, degree, Shore A)	-
5, 5.1, 5.2 (Packing And Marking)	-
Cl.5, 5.1, 5.2 (Packing And Marking)	-

-
2 nos. soles + 2 slab (200mm x 200mm, Thickness 1.8-2.2 mm) + 1 slab (200 x 200 mm, Thickness 2.8-3.2 mm)

11470

Bombay Textiles Research Association (BTRA), Mumbai

7130206

IS 16090 (2013)

Geo-synthetics – Geo-textiles used as protection (or cushioning) materials – Specification

382800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class I(Mass per unit area, g/m2)	-	1020	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class I(Tensile strength, kN/m)	-	7170	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class I(Trapezoidal tear strength, kN)	-	2520	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class I(CBR puncture resistance, kN)	-	5420	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class I(Maximum UV resistance (after 500 h exposure), percent)	-	47000	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class II(Mass per unit area, g/m2)	-	1020	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class II(Tensile strength, kN/m)	-	7170	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class II(Trapezoidal tear strength, kN)	-	2520	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class II(CBR puncture resistance, kN)	-	5420	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class II(Maximum UV resistance (after 500 h exposure), percent)	-	47000	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class III(Mass per unit area, g/m2)	-	1020	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class III(Tensile strength, kN/m)	-	7170	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class III(Trapezoidal tear strength, kN)	-	2520	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class III(CBR puncture resistance, kN)	-	5420	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class III(Maximum UV resistance (after 500 h exposure), percent)	-	47000	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class IV(Mass per unit area, g/m2)	-	1020	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class IV(Tensile strength, kN/m)	-	7170	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class IV(Trapezoidal tear strength, kN)	-	2520	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class IV(CBR puncture resistance, kN)	-	5420	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class IV(Maximum UV resistance (after 500 h exposure), percent)	-	47000	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class V(Mass per unit area, g/m2)	-	1020	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class V(Tensile strength, kN/m)	-	7170	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class V(Trapezoidal tear strength, kN)	-	2520	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class V(CBR puncture resistance, kN)	-	5420	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class V(Maximum UV resistance (after 500 h exposure), percent)	-	47000	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class VI(Mass per unit area, g/m2)	-	1020	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class VI(Tensile strength, kN/m)	-	7170	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class VI(Trapezoidal tear strength, kN)	-	2520	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class VI(Maximum UV resistance (after 500 h exposure), percent)	-	47000	-
6.2(Sampling)	-	0	-
7(Packing)	-	0	-
9.1(Identification)	-	4020	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class I(Mass per unit area, g/m2)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class I(Tensile strength, kN/m)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class I(Trapezoidal tear strength, kN)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class I(CBR puncture resistance, kN)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class I(Maximum UV resistance (after 500 h exposure), percent)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class II(Mass per unit area, g/m2)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class II(Tensile strength, kN/m)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class II(Trapezoidal tear strength, kN)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class II(CBR puncture resistance, kN)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class II(Maximum UV resistance (after 500 h exposure), percent)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class III(Mass per unit area, g/m2)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class III(Tensile strength, kN/m)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class III(Trapezoidal tear strength, kN)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class III(CBR puncture resistance, kN)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class III(Maximum UV resistance (after 500 h exposure), percent)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class IV(Mass per unit area, g/m2)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class IV(Tensile strength, kN/m)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class IV(Trapezoidal tear strength, kN)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class IV(CBR puncture resistance, kN)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class IV(Maximum UV resistance (after 500 h exposure), percent)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class V(Mass per unit area, g/m2)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class V(Tensile strength, kN/m)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class V(Trapezoidal tear strength, kN)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class V(CBR puncture resistance, kN)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class V(Maximum UV resistance (after 500 h exposure), percent)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class VI(Mass per unit area, g/m2)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class VI(Tensile strength, kN/m)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class VI(Trapezoidal tear strength, kN)	-	0	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class VI(CBR puncture resistance, kN)	-	5420	-
Table 1, Clauses 4.4, 4.5, 4.6 and 6.4, Class VI(Maximum UV resistance (after 500 h exposure), percent)	-	0	-
6.2(Sampling)	-	0	-
7(Packing)	-	0	-
9.1(Identification)	-	0	-

-
-

11471

International Centre for Automotive Technology (Centre-2) - ICAT, Gurugram

8135535

IS 15636 (2022)

Automotive vehicles - Pneumatic tyres for commercial vehicles - Diagonal and radial ply

13 to 24 inch

69190 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Tyre dimension- Section Width)	-	5500	Combined Test Charges for Cl. No.4.1.1 & 4.1.2
4.1(Tyre dimension- Outer diameter)	-	0	The clause will be tested in totality as Cl. No. 4.1. Hence separate charges are not available.
4.2(Endurance test-Change in diameter)	-	54500	No Remarks
4.3(Load & Speed test)	-	21000	No Remarks
4.1.1(Tread wear Indicator)	-	4000	No Remarks
4.5(Tyre strength (Plunger test))	-	10000	No Remarks
5(Marking)	-	0	Charges of this test is included under Dimension Test.
Cl. No. 4.2.5, Annex B, Table No. 29(Second Endurance Test)	-	54500	No Remarks
Cl. No. 5.1(a) to (m)(Markings)	-	0	Charges of this test is included under Dimension Test.
Cl. No. 5.2, Annex E,(Arrangement of Tyre Markings)	-	0	Charges of this test is included under Dimension Test.

01 Mar, 2029

-
-

11472

International Centre for Automotive Technology (Centre-2) - ICAT, Gurugram

8135535

IS 15633 (2022)

Automotive vehicles - pneumatic tyres for passenger car vehicles - diagonal and radial ply

12 inch to 23 inch

73616 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Tyre dimension- Section Width)	-	4500	Complete Tyre dimensions test charges including Tyre Section Width & Outer diameter.
4.1(Tyre dimension- Outer diameter)	-	0	No separate charges are available for this test as this test is a part of the Tyre Dimension Test
4.2(Load & Speed test)	-	18500	No remarks
4.3(Endurance test)	-	45000	No remarks
4.4(Bead Unseating Resistance)	-	5500	No remarks
4.5(Tread wear Indicator)	-	3500	No remarks
4.6(Tyre strength (Plunger test))	-	9000	No remarks
5(Marking)	-	0	Charges of this test is included under Dimension Test.
Cl. No. 5.1 (a) to 5.1 (n)(Markings)	-	0	Charges of this test is included under Dimension Test.
Cl. No. 5.4, Annex H,(Arrangement of Tyre Markings)	-	0	Charges of this test is included under Dimension Test.

01 Mar, 2029

-
-

11473

International Centre for Automotive Technology (Centre-2) - ICAT, Gurugram

8135535

IS 15627 (2022)

Automotive Vehicles - Pneumatic Tyres for Two and Three - Wheeled Motor Vehicles - Specification First Revision

8 inch to 21 inch

72600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. No. 4.1.1.1, Annex D, Table No. 5(a), 5(b), 6(a), 6(b), 7 to 12(Tyre Dimension_Section Width of Tyre)	-	2500	Combined test charges for Section Width and outer diameter (Dimension Test) are INR 4500
Cl. No. 4.1.1.2, Annex D, Table No. 5(a), 5(b), 6(a), 6(b), 7 to 12(Tyre Dimension_Outer Diameter of Tyre)	-	1999.99	Combined test charges for Section Width and outer diameter (Dimension Test) are INR 4500
Cl. No. 4.2 & E-1.2, Annex E, Table No. 13(Load/Speed Performance Test)	-	19500	OK
Cl. No. 4.5, H-4 & E-1.2 Annex H, Table No. 18(Endurance Test)	-	44000	OK
Cl. No. 4.6,Annex-D(Tread Wear Indicators)	-	3500	OK
Cl. No. 4.3 & F-3.4, Annex F, Table No. 14(Dynamic Growth of Tyres)	-	7000	OK
Cl. No. 4.4, G-1, G-6.1 and G-6.3, Annex G, Table No.15 to 17(Tyre Strengtrh Test (Plunger Test))	-	9000	OK
Cl. No. 5.2, Annex H, Table No. 19 & 20(Arrangement of Tyre Markings)	-	0	Combined test charges for Section Width and outer diameter (Dimension Test) are INR 4500
Cl. No. 5.1(a) to 5.1 (u)(Markings)	-	0	Combined test charges for Section Width and outer diameter (Dimension Test) are INR 4500

01 Mar, 2029

-
-

11474

International Centre for Automotive Technology (Centre-2) - ICAT, Gurugram

8135535

IS 15627 (2005)

Automotive vehicles - Pneumatic tyres i?or two and three - Wheeled motor vehicles - Specification

8 inch to 21 inch

72600 View breakup
Rs. 65600/- (Speed< 150 km/hr) & Rs. 72600/- (Speed> 150km/hr)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4/4.3 Refer Annex F,Table 13(Dynamic Growth of~Tyres)	-	7000	OK
4.5 refer Table 17 and Annex H(Endurance Test)	-	44000	OK
4/4.2.1 /4.2.2/4.2.3,Annex E ,Table 12(Load/Speed Performance Test)	-	19500	OK
4.6/4.6.1(Tread Wear Indicators)	-	3500	OK
4/4.1.1.1- Refer Annex C Col 2 and Annex D(test method )(Tyre dimensions/Section width)	-	2500	Combined test charges for Section Width and Outer Diameter (Dimension Test) are INR 4500.
4/4.1.1.2- Refer Annex C Col 2 and Annex D(test method )(Tyre outer diameter)	-	2000	Combined test charges for Section Width and Outer Diameter (Dimension Test) are INR 4500.
4.4,Refer Table 14 to 16 and Annex G(Tyre Strength Test (Plunger Test) )	-	9000	OK
5, Annex J(Arrangement of tyre markings)	-	0	Combined test charges for Section Width, Outer Diameter (Dimension Test) and Markings are INR 4500.
5(Markings)	-	0	Combined test charges for Section Width, Outer Diameter (Dimension Test) and Markings are INR 4500.

01 Mar, 2029

-
-

11475

International Centre for Automotive Technology (Centre-2) - ICAT, Gurugram

8135535

IS 15633 (2005)

Automotive vehicles - Pneumatic tyres for passenger car vehicles - Diagonal and radial ply - Specification

12 inch to 23 inch

73616 View breakup
Rs. 73616/- (Tubeless) & Rs. 68116/- (Tube type)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4/4.1.1.1- Refer Annex B Col 2 and Annex D(test method )(Tyre dimensions/Section width)	-	4500	Complete Tyre dimensions test charges including Tyre Section Width & Outer diameter.
4/4.1.1.2- Refer Annex B Col 2 and Annex D(test method )(Tyre outer diameter)	-	0	No separate charges are available for this test as this test is a part of the Tyre Dimension Test
4/4.2.1 /4.2.2/4.2.3,Refer Annex D ,Table 13(Load/Speed Performance Test)	-	18500	No remarks
4.3/4.3.1/4.3.2 Refer Annex E and Table 14( Endurance Test)	-	45000	No remarks
4.4/4.4.1/4.4.2 Refer Annex F and Table 15 and 16(Bead Unseating Resistance Test for Tubeless Tyre )	-	5500	No remarks
4.5.1(Tread-Wear -Indicators)	-	3500	No remarks
4.6. Refer Annex G ,Table 17 and 18(Tyre.Strength Test)	-	9000	No remarks
5(Markings)	-	0	No separate charges are available for this test as this test is a part of the Tyre Dimension Test
5.4, Annex J(Arrangement of tyre markings)	-	0	No separate charges are available for this test as this test is a part of the Tyre Dimension Test

01 Mar, 2029

-
-

11476

International Centre for Automotive Technology (Centre-2) - ICAT, Gurugram

8135535

IS 15636 (2012)

Automotive vehicles - Pneumatic tyres for commercial vehicles - Diagonal and radial ply - Specification (First Revision)

13 inch to 24 inch

69190 View breakup
Rs. 69,190/- (L1>121 & Speed symbol upto "P") & Rs. 44,550/- (L1<121 & Speed symbol "Q" and above)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Tyre Dimensions)	-	5500	Combined Test Charges for Cl. No.4.1.1 & 4.1.2
4.1.1(Section width of tyre)	-	0	The clause will be tested in totality as Cl. No. 4.1. Hence separate charges are not available.
4.1.1.2(Tyre outer diameter)	-	0	The clause will be tested in totality as Cl. No. 4.1. Hence separate charges are not available.
4.2(Endurance test)	-	54500	No Remarks
4.3.1(Load/Speed performance test)	-	21000	No Remarks
4,4,1(Tread -wear indicators)	-	4000	No Remarks
4.5(Tyre strength test (Plunger rest))	-	10000	No Remarks
5, 8(Marking)	-	0	Charges of this test is included under Dimension Test.
5.2, Annex E(Arrangement of tyre markings)	-	0	Charges of this test is included under Dimension Test.

01 Mar, 2029

-
-

11477

Intertek India Private Limited, New Delhi (E-20)

8122426

IS 7872 (2020)

Deep Freezers - Specification ( Second Revision )

550000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Safety Requirements)	-	160000	-
7(Sound Pressure Level)	-	5000	-
8(Freezer Storage Capacity)	-	25000	-
11.1(No load Pull down Test)	-	30000	-
6(Safety Requirements)	-	0	Repeated
7(Sound Pressure Level)	-	0	Repeated
8(Freezer Storage Capacity)	-	0	Repeated
11.1(No load Pull down Test)	-	0	Repeated
11.2(Energy Consumption Test)	-	60000	-
11.3(Temperature Rise Test)	-	155000	-
11.4(Door Seal Test)	-	5000	-
11.6(Thermal Insulation Test ( External Condensation))	-	60000	-
13(Marking and Instruction)	-	5000	-
6(Safety Requirements)	-	0	Repeated
7(Sound Pressure Level)	-	0	Repeated
8(Freezer Storage Capacity)	-	0	Repeated
11.1(No load Pull down Test)	-	0	Repeated
11.2(Energy Consumption Test)	-	0	Repeated
11.3(Temperature Rise Test)	-	0	Repeated
11.4(Door Seal Test)	-	0	Repeated
11.6(Thermal Insulation Test ( External Condensation))	-	0	Repeated
13(Marking and Instruction)	-	0	Repeated
6(Safety Requirements)	-	0	Repeated
7(Sound Pressure Level)	-	0	Repeated
8(Freezer Storage Capacity)	-	0	Repeated
11.1(No load Pull down Test)	-	0	Repeated
11.2(Energy Consumption Test)	-	0	Repeated
11.3(Temperature Rise Test)	-	0	Repeated
11.4(Door Seal Test)	-	0	Repeated
11.6(Thermal Insulation Test ( External Condensation))	-	0	Repeated
13(Marking and Instruction)	-	0	Repeated
6(Safety Requirements)	-	0	Repeated
7(Sound Pressure Level)	-	0	Repeated
8(Freezer Storage Capacity)	-	0	Repeated
11.1(No load Pull down Test)	-	0	Repeated
11.2(Energy Consumption Test)	-	0	Repeated
11.3(Temperature Rise Test)	-	0	Repeated
11.4(Door Seal Test)	-	0	Repeated
11.6(Thermal Insulation Test ( External Condensation))	-	0	Repeated
13(Marking and Instruction)	-	0	Repeated
6(Safety Requirements)	-	0	Repeated
7(Sound Pressure Level)	-	0	Repeated
8(Freezer Storage Capacity)	-	0	Repeated
11.1(No load Pull down Test)	-	0	Repeated
11.2(Energy Consumption Test)	-	0	Repeated
11.3(Temperature Rise Test)	-	0	Repeated
11.4(Door Seal Test)	-	0	Repeated
11.6(Thermal Insulation Test ( External Condensation))	-	0	Repeated
13(Marking and Instruction)	-	0	Repeated
6(Safety Requirements)	-	0	Repeated
7(Sound Pressure Level)	-	0	Repeated
8(Freezer Storage Capacity)	-	0	Repeated
11.1(No load Pull down Test)	-	0	Repeated
11.2(Energy Consumption Test)	-	0	Repeated
11.3(Temperature Rise Test)	-	0	Repeated
11.4(Door Seal Test)	-	0	Repeated
11.6(Thermal Insulation Test ( External Condensation))	-	0	Repeated
13(Marking and Instruction)	-	0	Repeated
5(Refrigeration system)	-	0	-
5.1(Sound level)	-	0	As per IS 7872 : 2020, clause no 5.1 is Construction.
9.1(No load test)	-	0	As per IS 7872 : 2020, clause no 9.1 is Freezer Installation.
10.2.1(Door seal test )	-	0	As per IS 7872 : 2020, clause no 10.2.1 is Ambient Temperature.
11.5(Mechanical Strength of Shelves and Similar Components)	-	45000	-
11.1(No load Pull down Test)	-	0	Repeated
11.2(Energy Consumption Test)	-	0	Repeated
11.3(Temperature Rise Test)	-	0	Repeated
11.4(Door Seal Test)	-	0	Repeated
11.6(Thermal Insulation Test ( External Condensation))	-	0	Repeated
7(Sound Pressure Level)	-	0	Repeated
8(Freezer Storage Capacity)	-	0	Repeated
11.5(Mechanical Strength of Shelves and Similar Components)	-	0	Repeated
6(Measurement of freezer storage capacity)	-	0	Repeated
6(Safety Requirements)	-	0	Repeated
13(Marking and Instruction)	-	0	Repeated
10.2.12(Temperature rise test)	-	0	This clause is not available in IS 7872 : 2020
6(Safety Requirements)	-	-	-
7(Sound Pressure Level)	-	-	-
8(Freezer Storage Capacity)	-	-	-
11.1(No load Pull down Test)	-	-	-
11.2(Energy Consumption Test)	-	-	-
11.3(Temperature Rise Test)	-	-	-
11.4(Door Seal Test)	-	-	-
11.6(Thermal Insulation Test ( External Condensation))	-	-	-
13(Marking and Instruction)	-	-	-
5(Refrigeration system)	-	-	-
5.1(Sound level)	-	-	-
9.1(No load test)	-	-	-
10.2.1(Door seal test )	-	-	-
11.5(Mechanical Strength of Shelves and Similar Components)	-	-	-
11.1(No load Pull down Test)	-	-	-
11.2(Energy Consumption Test)	-	-	-
11.3(Temperature Rise Test)	-	-	-
11.4(Door Seal Test)	-	-	-
11.6(Thermal Insulation Test ( External Condensation))	-	-	-
7(Sound Pressure Level)	-	-	-
8(Freezer Storage Capacity)	-	-	-
11.5(Mechanical Strength of Shelves and Similar Components)	-	-	-
6(Measurement of freezer storage capacity)	-	-	-
6(Safety Requirements)	-	-	-
13(Marking and Instruction)	-	-	-

27 Oct, 2028

-
Included w.e.f. 05.04.2024 for non-horizontal type freezer only

11478

MSME TESTING CENTRE (WR), MUMBAI

7119404

IS 14855 : Part 1 (2000)

Plant protection and vector control equipment - Fogging machines - Specification: Part 1 pulse - Jet - Type thermal fogger

ALL

56050 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
All(Requirements)	-	56050	Including GST
All(Requirements)	-	56050	Including GST
All(Requirements)	-	56050	Including GST
Cl 4(MATERIALS)	-	3000	Excluding GST
Cl 4(MATERIALS)	-	3000	Excluding GST
Cl 5.1(General)	-	1500	Excluding GST
Cl 5.1(General)	-	1500	Excluding GST
Cl 5.2(Pump)	-	1000	Excluding GST
Cl 5.2(Pump)	-	1000	Excluding GST
Cl 5.3(Pulse-Jet Engine)	-	10000	Excluding GST
Cl 5.3(Pulse-Jet Engine)	-	10000	Excluding GST
Cl 5.5(Pesticide Tank)	-	1000	Excluding GST
Cl 5.5(Pesticide Tank)	-	1000	Excluding GST
Cl 5.6(Metering System)	-	4500	Excluding GST
Cl 5.6(Metering System)	-	4500	Excluding GST
Cl 5.7(Mounting Frame and Strap)	-	4000	Excluding GST
Cl 5.7(Mounting Frame and Strap)	-	4000	Excluding GST
Cl 6(PERFORMANCE REQUIREMENTS)	-	5000	Excluding GST
Cl 6(PERFORMANCE REQUIREMENTS)	-	5000	Excluding GST
Cl 7.1(Spare Parts and Tools)	-	500	Excluding GST
Cl 7.1(Spare Parts and Tools)	-	500	Excluding GST
Cl 7.2(Operation and Maintenance Manual)	-	500	Excluding GST
Cl 7.2(Operation and Maintenance Manual)	-	500	Excluding GST
Cl 7.3(Specification Sheet)	-	500	Excluding GST
Cl 7.3(Specification Sheet)	-	500	Excluding GST
Cl 8.2(Pulse-Jet Engine)	-	10000	Excluding GST
Cl 8.2(Pulse-Jet Engine)	-	10000	Excluding GST
Cl 8.3(Nozzle)	-	3500	Excluding GST
Cl 8.3(Nozzle)	-	3500	Excluding GST
Cl 8.4(Strap Test)	-	2500	Excluding GST
Cl 8.4(Strap Test)	-	2500	Excluding GST
All(Requirements)	-	56050	-
All(Requirements)	-	56050	Including GST
Cl 4(MATERIALS)	-	3000	Excluding GST
Cl 4(MATERIALS)	-	3000	Excluding GST
Cl 5.1(General)	-	1500	Excluding GST
Cl 5.1(General)	-	1500	Excluding GST
Cl 5.2(Pump)	-	1000	Excluding GST
Cl 5.2(Pump)	-	1000	Excluding GST
Cl 5.3(Pulse-Jet Engine)	-	10000	Excluding GST
Cl 5.3(Pulse-Jet Engine)	-	10000	Excluding GST
Cl 5.5(Pesticide Tank)	-	1000	Excluding GST
Cl 5.5(Pesticide Tank)	-	1000	Excluding GST
Cl 5.6(Metering System)	-	4500	Excluding GST
Cl 5.6(Metering System)	-	4500	Excluding GST
Cl 5.7(Mounting Frame and Strap)	-	4000	Excluding GST
Cl 5.7(Mounting Frame and Strap)	-	4500	Excluding GST
Cl 6(PERFORMANCE REQUIREMENTS)	-	5000	Excluding GST
Cl 6(PERFORMANCE REQUIREMENTS)	-	5000	Excluding GST
Cl 7.1(Spare Parts and Tools)	-	500	Excluding GST
Cl 7.1(Spare Parts and Tools)	-	500	Excluding GST
Cl 7.2(Operation and Maintenance Manual)	-	500	Excluding GST
Cl 7.2(Operation and Maintenance Manual)	-	500	Excluding GST
Cl 7.3(Specification Sheet)	-	500	Excluding GST
Cl 7.3(Specification Sheet)	-	500	Excluding GST
Cl 8.2(Pulse-Jet Engine)	-	10000	Excluding GST
Cl 8.2(Pulse-Jet Engine)	-	10000	Excluding GST
Cl 8.3(Nozzle)	-	3500	Excluding GST
Cl 8.3(Nozzle)	-	3500	Excluding GST
Cl 8.4(Strap Test)	-	2500	Excluding GST
Cl 8.4(Strap Test)	-	2500	Excluding GST
All(Requirements)	-	56050	-
All(Requirements)	-	56050	-
Cl 4(MATERIALS)	-	3000	-
Cl 4(MATERIALS)	-	3000	-
Cl 5.1(General)	-	1500	-
Cl 5.1(General)	-	1500	-
Cl 5.2(Pump)	-	1000	-
Cl 5.2(Pump)	-	1000	-
Cl 5.3(Pulse-Jet Engine)	-	10000	-
Cl 5.3(Pulse-Jet Engine)	-	10000	-
Cl 5.5(Pesticide Tank)	-	1000	-
Cl 5.5(Pesticide Tank)	-	1000	-
Cl 5.6(Metering System)	-	4500	-
Cl 5.6(Metering System)	-	4500	-
Cl 5.7(Mounting Frame and Strap)	-	4000	-
Cl 5.7(Mounting Frame and Strap)	-	4000	-
Cl 6(PERFORMANCE REQUIREMENTS)	-	5000	-
Cl 6(PERFORMANCE REQUIREMENTS)	-	5000	-
Cl 7.1(Spare Parts and Tools)	-	500	-
Cl 7.1(Spare Parts and Tools)	-	500	-
Cl 7.2(Operation and Maintenance Manual)	-	500	-
Cl 7.2(Operation and Maintenance Manual)	-	500	-
Cl 7.3(Specification Sheet)	-	500	-
Cl 7.3(Specification Sheet)	-	500	-
Cl 8.2(Pulse-Jet Engine)	-	10000	-
Cl 8.2(Pulse-Jet Engine)	-	10000	-
Cl 8.3(Nozzle)	-	3500	-
Cl 8.3(Nozzle)	-	3500	-
Cl 8.4(Strap Test)	-	2500	-
Cl 8.4(Strap Test)	-	2500	-
All(Requirements)	-	56050	including GST
All(Requirements)	-	56050	including GST
Cl 4(MATERIALS)	-	3000	excluding GST
Cl 4(MATERIALS)	-	3000	excluding GST
Cl 5.1(General)	-	1500	excluding GST
Cl 5.1(General)	-	1500	excluding GST
Cl 5.2(Pump)	-	1000	excluding GST
Cl 5.2(Pump)	-	1000	excluding GST
Cl 5.3(Pulse-Jet Engine)	-	10000	excluding GST
Cl 5.3(Pulse-Jet Engine)	-	10000	excluding GST
Cl 5.5(Pesticide Tank)	-	1000	excluding GST
Cl 5.5(Pesticide Tank)	-	1000	excluding GST
Cl 5.6(Metering System)	-	4500	excluding GST
Cl 5.6(Metering System)	-	4500	excluding GST
Cl 5.7(Mounting Frame and Strap)	-	4000	excluding GST
Cl 5.7(Mounting Frame and Strap)	-	4000	excluding GST
Cl 6(PERFORMANCE REQUIREMENTS)	-	5000	excluding GST
Cl 6(PERFORMANCE REQUIREMENTS)	-	5000	excluding GST
Cl 7.1(Spare Parts and Tools)	-	500	excluding GST
Cl 7.1(Spare Parts and Tools)	-	500	excluding GST
Cl 7.2(Operation and Maintenance Manual)	-	500	excluding GST
Cl 7.2(Operation and Maintenance Manual)	-	500	excluding GST
Cl 7.3(Specification Sheet)	-	500	excluding GST
Cl 7.3(Specification Sheet)	-	500	excluding GST
Cl 8.2(Pulse-Jet Engine)	-	10000	excluding GST
Cl 8.2(Pulse-Jet Engine)	-	10000	excluding GST
Cl 8.3(Nozzle)	-	3500	excluding GST
Cl 8.3(Nozzle)	-	3500	excluding GST
Cl 8.4(Strap Test)	-	2500	excluding GST
Cl 8.4(Strap Test)	-	2500	excluding GST

-
-

11479

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 1538 (1993)

Cast iron fittings for pressure pipes for water, gas and sewage - Specification (Third Revision)

upto and including 700 mm

10500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8(Hydrostatic Test)	-	3500	For complete Cl 8 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
4.1(The metal used for the manufacture of pipe shall be of a quality not less than that specified for grade FG 150 of IS 210 )	-	500	For Complete Cl 4 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
5.1(tensile strength)	-	2000	For complete Cl 5 and Cl 6 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
6.1(Brinell hardness tests)	-	2000	For complete Cl 5 and Cl 6 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1,Table 2 & 3(DI)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1,Table 2 & 3(P)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1,Table 2 & 3(g)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1,Table 2 & 3(h)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1,Table 2 & 3(K)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1,Table 2 & 3(L)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1,Table 2 & 3(M)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1,Table 2 & 3(N)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1,Table 2 & 3(f)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1,Table 4(D)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1,Table 4(a)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1,Table 4(b)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1,Table 4(s)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1,Table 4(r)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1,Table 5(D)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
12.1 to 12.7(Coating )	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1&11.1,Table 28(Mass (Approx))	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1,Table 5(g)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1,Table 5(s)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1,Table 5(b)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1,Table 5(f)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1,Table 5(Holes No)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1,Table 5(Holes diameter)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1,Table 5(Diameterof Bolts)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1,Table 6(D)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1,Table 6(C)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1,Table 6(Holes No)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1,Table 6(Diameterof Bolts)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1&11.1,Table 7,8&9(e)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1&11.1,Table 7,8&9(l)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1&11.1,Table 7,8&9(Mass (Approx))	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1&11.1,Table 10 to13(e)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1&11.1,Table 10 to13(r)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1&11.1,Table 10 to13(a)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1&11.1,Table 10 to13(b)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1&11.1,Table 10 to13(Mass (Approx))	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1&11.1,Table 14(Nominal Diameter)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1&11.1,Table 14(e)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1&11.1,Table 14(e1)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1&11.1,Table 14(l)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1&11.1,Table 14(h)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1&11.1,Table 14(Mass (Approx))	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1&11.1,Table 15(e)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1&11.1,Table 15(l)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1&11.1,Table 15(Nominal Diameter)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1&11.1,Table 15(e1)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1&11.1,Table 15(k)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1&11.1,Table 15(Mass (Approx))	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1&11.1,Table 16(e)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1&11.1,Table 16(l)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1&11.1,Table 16(h)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1&11.1,Table 16(Mass (Approx))	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1&11.1,Table 17(e1)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1&11.1,Table 17(l1)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1&11.1,Table 17(Nominal Diameter)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1&11.1,Table 17(e2)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1&11.1,Table 17(l2)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1&11.1,Table 17(l3)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1&11.1,Table 17(l)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1&11.1,Table 17(Mass)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1&11.1,Table 18(a)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1&11.1,Table 18(P)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1&11.1,Table 18(Mass (Approx))	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1&11.1,Table 19(DC)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1&11.1,Table 19(e)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1&11.1,Table 19(a)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1&11.1,Table 19(l)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1&11.1,Table 19(Mass (Approx))	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1&11.1,Table 20(DI)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1&11.1,Table 20(h)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1&11.1,Table 20(Mass (Approx))	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1&11.1,Table 21(e)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1&11.1,Table 21(r)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1&11.1,Table 21(a)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1&11.1,Table 21(b)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1&11.1,Table 21(Mass (Approx))	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1&11.1,Table 22(e)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1&11.1,Table 22(r)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1&11.1,Table 22(a)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1&11.1,Table 22(b)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1&11.1,Table 22(c)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1&11.1,Table 22(f)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1&11.1,Table 22(g)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1&11.1,Table 23(e)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1&11.1,Table 23(r)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1&11.1,Table 23(a)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1&11.1,Table 23(l)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1&11.1,Table 23(Mass (Approx))	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1&11.1,Table 24(e)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1&11.1,Table 24(l)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1&11.1,Table 24(Nominal Diameter)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1&11.1,Table 24(e1)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1&11.1,Table 24(h)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1&11.1,Table 24(Mass (Approx))	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1&11.1,Table 25(e)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1&11.1,Table 25(l)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1&11.1,Table 25(h)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1&11.1,Table 25(Mass (Approx))	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1&11.1,Table 26(e1)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1&11.1,Table 26(h1)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1&11.1,Table 26(Nominal Diameter)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1&11.1,Table 26(e2)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1&11.1,Table 26(l2)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1&11.1,Table 26(l3)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1&11.1,Table 26(l)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1&11.1,Table 27(dn)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1&11.1,Table 27(e1)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1&11.1,Table 27(b)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1&11.1,Table 27(l3)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1&11.1,Table 27(e2)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1&11.1,Table 27(r)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1&11.1,Table 27(a)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1&11.1,Table 27(l1)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1&11.1,Table 27(Mass)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm
9.1&11.1,Table 28(D)	-	4500	For complete Cl 9 and Cl 11 * 10500 for complete testing upto and including 600 mm * 15500 for complete testing above 600 mm

-
Included w.e.f. 28-07-2021. upto and including 700mm

11480

Softlines and Electrical Safety Testing Laboratory TUV Rheinland India Pvt Ltd., Gurgaon (8167106)

8167106

IS 10702 (2023)

Hawai Chappal-Specification

38905 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Material)	-	550	-
4.2(Length)	-	525	-
4.3(Thickness)	-	525	-
4.4 , Table No. 1 , i)(Density)	-	500	-
4.4 , Table No. 1 , ii)(2Compression set at constant stress)	-	1000	-
4.4 , Table No. 1 , iii)(3Split tear strength)	-	655	-
4.4 , Table No. 1 , iv)("Shrinkage at 50 ºC ± 1 ºC for 24 h for polymeric material, Shrinkage at 100 ºC ± 1 ºC for 1 h for rubber")	-	1500	-
4.4 , Table No. 1 , v)(5Abrasion resistance at applied force)	-	1210	-
4.4 , Table No. 1 , vi)(Flexing resistance: Maximum cut growth at 50 000 flexes)	-	1500	-
4.4 , Table No. 1 , vii)(7 Hydrolysis resistance, Maximum cut growth at 50 000 flexes)	-	1500	-
4.4 , Table No . 2 , i)(Density , Solid strap, Cellular strap)	-	500	-
4.4 , Table No . 2 , ii)("Breaking strength , Strap to strap and Toe portion to strap , Elongation at break")	-	655	-
4.4 , Table No . 2 , iii)(Minimum cross section of the stud)	-	525	-
4.4 , Table No . 2 , iv)(Stud bolt)	-	525	-
4.4 , Table No . 3 , i)(Toe post attachment strength)	-	1030	-
4.4 , Table No . 3 , ii)(Attachment strength of rear strap)	-	1030	-
4.4 , Table No . 3 , iii)(Inter layer bond strength)	-	1210	-
6(MARKING AND PACKING)	-	500	-
Cl. No.5.1,Table no.1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	4200	4200 each
Cl. No.5.1,Table no.1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	3150	All Amines
Cl. No.5.1,Table no.1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	2100	-
Cl. No.5.1,Table no.1 of IS 17011(iv)(Chromium (VI))	-	2500	-
Cl. No.5.1,Table no.1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	4200	-
Cl. No.5.1,Table no.1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	3675	1575 - Free 2100 - Released
Cl. No.5.1,Table no.1 of IS 17011(vii)(Formaldehyde)	-	525	-
Cl. No.5.1,Table no.1 of IS 17011(viii)(Organotin compounds)	-	10500	More than 5 analytes
Cl. No.5.1,Table no.1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	5250	-
Cl. No.5.1,Table no.1 of IS 17011(x)(pH)	-	700	-
Cl. No.5.1,Table no.1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	3780	-
Cl. No.5.1,Table no.1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	3150	-
Cl.No. 5.2(lead content)	-	1260	-
4.1(Material)	-	550	-
4.2(Length)	-	525	-
4.3(Thickness)	-	525	-
4.4 , Table No. 1 , i)(Density)	-	500	-
4.4 , Table No. 1 , ii)(2Compression set at constant stress)	-	1000	-
4.4 , Table No. 1 , iii)(3Split tear strength)	-	655	-
4.4 , Table No. 1 , iv)("Shrinkage at 50 ºC ± 1 ºC for 24 h for polymeric material, Shrinkage at 100 ºC ± 1 ºC for 1 h for rubber")	-	1500	-
4.4 , Table No. 1 , v)(5Abrasion resistance at applied force)	-	1210	-
4.4 , Table No. 1 , vi)(Flexing resistance: Maximum cut growth at 50 000 flexes)	-	1500	-
4.4 , Table No. 1 , vii)(7 Hydrolysis resistance, Maximum cut growth at 50 000 flexes)	-	1500	-
4.4 , Table No . 2 , i)(Density , Solid strap, Cellular strap)	-	500	-
4.4 , Table No . 2 , ii)("Breaking strength , Strap to strap and Toe portion to strap , Elongation at break")	-	655	-
4.4 , Table No . 2 , iii)(Minimum cross section of the stud)	-	525	-
4.4 , Table No . 2 , iv)(Stud bolt)	-	525	-
4.4 , Table No . 3 , i)(Toe post attachment strength)	-	1030	-
4.4 , Table No . 3 , ii)(Attachment strength of rear strap)	-	1030	-
4.4 , Table No . 3 , iii)(Inter layer bond strength)	-	1210	-
6(MARKING AND PACKING)	-	500	-
Cl. No.5.1,Table no.1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	4200	Each (DD&CD)
Cl. No.5.1,Table no.1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	3150	All Amines
Cl. No.5.1,Table no.1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	2100	-
Cl. No.5.1,Table no.1 of IS 17011(iv)(Chromium (VI))	-	2500	-
Cl. No.5.1,Table no.1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	4200	-
Cl. No.5.1,Table no.1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	3675	Free -1575 Release - 2100
Cl. No.5.1,Table no.1 of IS 17011(vii)(Formaldehyde)	-	525	-
Cl. No.5.1,Table no.1 of IS 17011(viii)(Organotin compounds)	-	10500	More Than 5 Analytes
Cl. No.5.1,Table no.1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	5250	-
Cl. No.5.1,Table no.1 of IS 17011(x)(pH)	-	700	-
Cl. No.5.1,Table no.1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	3780	-
Cl. No.5.1,Table no.1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	3150	-
Cl.No. 5.2(lead content)	-	1260	-
4.1(Material)	-	1	-
4.2(Length)	-	1	-
4.3(Thickness)	-	1	-
4.4 , Table No. 1 , i)(Density)	-	1	-
4.4 , Table No. 1 , ii)(2Compression set at constant stress)	-	1	-
4.4 , Table No. 1 , iii)(3Split tear strength)	-	1	-
4.4 , Table No. 1 , iv)("Shrinkage at 50 ºC ± 1 ºC for 24 h for polymeric material, Shrinkage at 100 ºC ± 1 ºC for 1 h for rubber")	-	1	-
4.4 , Table No. 1 , v)(5Abrasion resistance at applied force)	-	0.99	-
4.4 , Table No. 1 , vi)(Flexing resistance: Maximum cut growth at 50 000 flexes)	-	1	-
4.4 , Table No. 1 , vii)(7 Hydrolysis resistance, Maximum cut growth at 50 000 flexes)	-	1	-
4.4 , Table No . 2 , i)(Density , Solid strap, Cellular strap)	-	1	-
4.4 , Table No . 2 , ii)("Breaking strength , Strap to strap and Toe portion to strap , Elongation at break")	-	1	-
4.4 , Table No . 2 , iii)(Minimum cross section of the stud)	-	1	-
4.4 , Table No . 2 , iv)(Stud bolt)	-	1	-
4.4 , Table No . 3 , i)(Toe post attachment strength)	-	1	-
4.4 , Table No . 3 , ii)(Attachment strength of rear strap)	-	1	-
4.4 , Table No . 3 , iii)(Inter layer bond strength)	-	1	-
6(MARKING AND PACKING)	-	1	-
Cl. No.5.1,Table no.1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	1	-
Cl. No.5.1,Table no.1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	1	-
Cl. No.5.1,Table no.1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	1	-
Cl. No.5.1,Table no.1 of IS 17011(iv)(Chromium (VI))	-	1	-
Cl. No.5.1,Table no.1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	1	-
Cl. No.5.1,Table no.1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	1	-
Cl. No.5.1,Table no.1 of IS 17011(vii)(Formaldehyde)	-	1	-
Cl. No.5.1,Table no.1 of IS 17011(viii)(Organotin compounds)	-	1	-
Cl. No.5.1,Table no.1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	1	-
Cl. No.5.1,Table no.1 of IS 17011(x)(pH)	-	1	-
Cl. No.5.1,Table no.1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	1	-
Cl. No.5.1,Table no.1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	1	-
Cl.No. 5.2(lead content)	-	1	-
4.1(Material)	-	1	-
4.2(Length)	-	1	-
4.3(Thickness)	-	1	-
4.4 , Table No. 1 , i)(Density)	-	1	-
4.4 , Table No. 1 , ii)(2Compression set at constant stress)	-	1	-
4.4 , Table No. 1 , iii)(3Split tear strength)	-	1	-
4.4 , Table No. 1 , iv)("Shrinkage at 50 ºC ± 1 ºC for 24 h for polymeric material, Shrinkage at 100 ºC ± 1 ºC for 1 h for rubber")	-	1	-
4.4 , Table No. 1 , v)(5Abrasion resistance at applied force)	-	1	-
4.4 , Table No. 1 , vi)(Flexing resistance: Maximum cut growth at 50 000 flexes)	-	1	-
4.4 , Table No. 1 , vii)(7 Hydrolysis resistance, Maximum cut growth at 50 000 flexes)	-	1	-
4.4 , Table No . 2 , i)(Density , Solid strap, Cellular strap)	-	1	-
4.4 , Table No . 2 , ii)("Breaking strength , Strap to strap and Toe portion to strap , Elongation at break")	-	1	-
4.4 , Table No . 2 , iii)(Minimum cross section of the stud)	-	1	-
4.4 , Table No . 2 , iv)(Stud bolt)	-	1	-
4.4 , Table No . 3 , i)(Toe post attachment strength)	-	1	-
4.4 , Table No . 3 , ii)(Attachment strength of rear strap)	-	1	-
4.4 , Table No . 3 , iii)(Inter layer bond strength)	-	1	-
5(CHEMICAL REQUIREMENT FOR HAWAI CHAPPAL)	-	1	-
6(MARKING AND PACKING)	-	1	-
Cl.No. 5.2(lead content)	-	1	-
Clause 4.1 - 4.1.1(Bottom Material)	-	1	-
Clause 4.1 - 4.1.2(Strap Material)	-	1	-
Clause 4.1 - 4.1.3(Material)	-	1	-
Clause 4.1 - 4.1.4(Material)	-	1	-
Clause 4.2(Material)	-	1	-
Clause 4.3 - 4.3.1(Thickness)	-	1	-
Clause 4.3 - 4.3.2(Thickness)	-	1	-
Clause 4.4 Table 1 -i)(Density, g/cm3, Min)	-	1	-
Clause 4.4 Table 1 -iii)(Split tear strength, kg, Min)	-	1	-
Clause 4.4 Table 1 -iv) - a("Shrinkage at 50 ºC ± 1 ºC for 24 h for polymeric material, percent, Max")	-	1	-
Clause 4.4 Table 1 -iv) - b(Shrinkage at 100 ºC ± 1 ºC for 1 h for rubber, percent, Max)	-	1	-
Clause 4.4 Table 1 -v)(Abrasion resistance at applied force 5 N)	-	1	-
Clause 4.4 Table 2 -i) - a("Density, g/cm3 Solid strap ")	-	1	-
Clause 4.4 Table 2 -i) - b(Density, g/cm3 Cellular strap)	-	1	-
Clause 4.4 Table 2 -ii) - a - 1("Breaking strength, kgf, Min Strap to strap(Solid Strap)")	-	1	-
Clause 4.4 Table 2 -ii) - a - 2("Breaking strength, kgf, Min Strap to strap(Cellular Strap)")	-	1	-
Clause 4.4 Table 2 -ii) - a - 3("Breaking strength, kgf, Min Toe portion to strap(Solid Strap)")	-	1	-
Clause 4.4 Table 2 -ii) - a - 4("Breaking strength, kgf, Min Toe portion to strap(Cellular Strap)")	-	1	-
Clause 4.4 Table 2 -ii) - b - 1("Elongation at break, percent (Applicable to strap to strap (V shape) Solid Strap")	-	1	-
Clause 4.4 Table 2 -ii) - b - 2("Elongation at break, percent (Applicable to strap to strap (V shape) Cellular Strap")	-	1	-
Clause 4.4 Table 2 -iii) - a("Minimum cross section of the stud, mm, Size 1 to 13 (Adult)")	-	1	-
Clause 4.4 Table 2 -iii) - b("Minimum cross section of the stud, mm, Size 3 to 13 (Children)")	-	1	-
Clause 4.4 Table 2 -iv) - a("Stud bolt, mm Diameter/edge to edge length")	-	1	-
Clause 4.4 Table 2 -iv) - b("Stud bolt, mm Thickness")	-	1	-
Clause 4.4 Table 3 -i)("Toe post attachment strength, N, Min")	-	1	-
Clause 4.4 Table 3 -ii)("Attachment strength of rear strap, N, Min")	-	1	-
Clause 4.4 Table 3 -iii)("Inter layer bond strength, N/mm, Min")	-	1	-
Cl-4 ((Amendment No-1)(Category And Type)	-	1	-
Cl-4.4, Table -1 S. No-1 (i) (Amendment No-1)(Compression set at constant stress)	-	1	-
Cl-4.4, Table -1 S. No-1 (ii) (Amendment No-1)(Split tear strength)	-	1	-
Cl-4.4, Table -1 S. No-1 (iii) (a)(Amendment No-1)("Shrinkage at Shrinkage at 50 °C ± 1 °C for 2 h for polymeric material, percent, Max ")	-	1	-
Cl-4.4, Table -1 S. No-1 (iii)(b) (Amendment No-1)(Shrinkage at 100 °C ± 1 °C for 1 h for rubber, percent, Max)	-	1	-
Cl-4.4, Table -1 S. No-1 (iv) (Amendment No-1)(Abrasion resistance at applied force)	-	1	-
Cl-4.4, Table -1 S. No-1 (v) (Amendment No-1)(Flexing resistance: Maximum cut growth,)	-	1	-
Cl-4.4, Table -1 S. No-1 (vi) (Amendment No-1)(Hydrolysis resistance:Maximum cut growth)	-	1	-
Cl-4.4, Table -1 S. No-1 (vii) (Amendment No-1)(Chemical requirements)	-	1	-
Cl-4.4, Table -1 S. No-1 (viii) (Amendment No-1)("Lead content (as Pb), ppm, Max")	-	1	-
Cl-4.4, Table -2 S. No-1 (i), a (Amendment No-1)("Breaking strength for Strap to strap 1-Solid strap 2-Cellular strap")	-	1	-
Cl-4.4, Table -2 S. No-1 (i), b (Amendment No-1)("Breaking strength for Toe portion to strap 1-Solid strap 2-Cellular strap")	-	1	-
Cl-4.4, Table -2 S. No-1 (i), c (Amendment No-1)("Elongation at break , percent, Min 1-Solid strap 2-Cellular strap")	-	1	-
Cl-4.4, Table -2 S. No-1 (ii), (Amendment No-1)(Chemical requirements)	-	1	-
Cl-4.4, Table -2 S. No-1 (iii), (Amendment No-1)(Lead content (as Pb), in ppm, Max)	-	1	-
Cl-4.4, Table -3 S. No-1 (i), (Amendment No-1)(Toe post attachment strength)	-	1	-
Cl-4.4, Table -3 S. No-1 (ii), (Amendment No-1)(Attachment strength of rear strap)	-	1	-
Cl-4.4, Table -3 S. No-1 (iii), (Amendment No-1)(Inter layer bond strength)	-	1	-
Cl.4.4 - Table No 1 - Sl. No.-vii(pH- IS 1390:2022)	-	1	-
Cl.4.4 - Table No 1 - Sl. No.-viii("Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988")	-	1	-
Cl. No.5.1,Table no.1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	1	-
Cl. No.5.1,Table no.1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	1	-
Cl. No.5.1,Table no.1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	1	-
Cl. No.5.1,Table no.1 of IS 17011(iv)(Chromium (VI))	-	1	-
Cl. No.5.1,Table no.1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	1	-
Cl. No.5.1,Table no.1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	1	-
Cl. No.5.1,Table no.1 of IS 17011(vii)(Formaldehyde)	-	1	-
Cl. No.5.1,Table no.1 of IS 17011(viii)(Organotin compounds)	-	1	-
Cl. No.5.1,Table no.1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	1	-
Cl. No.5.1,Table no.1 of IS 17011(x)(pH)	-	1	-
Cl. No.5.1,Table no.1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	1	-
Cl. No.5.1,Table no.1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	1	-
4.1(Material)	-	1	-
4.2(Length)	-	1	-
4.3(Thickness)	-	1	-
4.4 , Table No. 1 , i)(Density)	-	1	-
4.4 , Table No. 1 , ii)(2Compression set at constant stress)	-	1	-
4.4 , Table No. 1 , iii)(3Split tear strength)	-	1	-
4.4 , Table No. 1 , iv)("Shrinkage at 50 ºC ± 1 ºC for 24 h for polymeric material, Shrinkage at 100 ºC ± 1 ºC for 1 h for rubber")	-	1	-
4.4 , Table No. 1 , v)(5Abrasion resistance at applied force)	-	1	-
4.4 , Table No. 1 , vi)(Flexing resistance: Maximum cut growth at 50 000 flexes)	-	1	-
4.4 , Table No. 1 , vii)(7 Hydrolysis resistance, Maximum cut growth at 50 000 flexes)	-	1	-
4.4 , Table No . 2 , i)(Density , Solid strap, Cellular strap)	-	1	-
4.4 , Table No . 2 , ii)("Breaking strength , Strap to strap and Toe portion to strap , Elongation at break")	-	1	-
4.4 , Table No . 2 , iii)(Minimum cross section of the stud)	-	1	-
4.4 , Table No . 2 , iv)(Stud bolt)	-	1	-
4.4 , Table No . 3 , i)(Toe post attachment strength)	-	1	-
4.4 , Table No . 3 , ii)(Attachment strength of rear strap)	-	1	-
4.4 , Table No . 3 , iii)(Inter layer bond strength)	-	1	-
5(CHEMICAL REQUIREMENT FOR HAWAI CHAPPAL)	-	1	-
6(MARKING AND PACKING)	-	1	-
Cl.No. 5.2(lead content)	-	1	-
Clause 4.1 - 4.1.1(Bottom Material)	-	1	-
Clause 4.1 - 4.1.2(Strap Material)	-	1	-
Clause 4.1 - 4.1.3(Material)	-	1	-
Clause 4.1 - 4.1.4(Material)	-	1	-
Clause 4.2(Material)	-	1	-
Clause 4.3 - 4.3.1(Thickness)	-	1	-
Clause 4.3 - 4.3.2(Thickness)	-	1	-
Clause 4.4 Table 1 -i)(Density, g/cm3, Min)	-	1	-
Clause 4.4 Table 1 -iii)(Split tear strength, kg, Min)	-	1	-
Clause 4.4 Table 1 -iv) - a("Shrinkage at 50 ºC ± 1 ºC for 24 h for polymeric material, percent, Max")	-	1	-
Clause 4.4 Table 1 -iv) - b(Shrinkage at 100 ºC ± 1 ºC for 1 h for rubber, percent, Max)	-	1	-
Clause 4.4 Table 1 -v)(Abrasion resistance at applied force 5 N)	-	1	-
Clause 4.4 Table 2 -i) - a("Density, g/cm3 Solid strap ")	-	1	-
Clause 4.4 Table 2 -i) - b(Density, g/cm3 Cellular strap)	-	1	-
Clause 4.4 Table 2 -ii) - a - 1("Breaking strength, kgf, Min Strap to strap(Solid Strap)")	-	1	-
Clause 4.4 Table 2 -ii) - a - 2("Breaking strength, kgf, Min Strap to strap(Cellular Strap)")	-	1	-
Clause 4.4 Table 2 -ii) - a - 3("Breaking strength, kgf, Min Toe portion to strap(Solid Strap)")	-	1	-
Clause 4.4 Table 2 -ii) - a - 4("Breaking strength, kgf, Min Toe portion to strap(Cellular Strap)")	-	1	-
Clause 4.4 Table 2 -ii) - b - 1("Elongation at break, percent (Applicable to strap to strap (V shape) Solid Strap")	-	1	-
Clause 4.4 Table 2 -ii) - b - 2("Elongation at break, percent (Applicable to strap to strap (V shape) Cellular Strap")	-	1	-
Clause 4.4 Table 2 -iii) - a("Minimum cross section of the stud, mm, Size 1 to 13 (Adult)")	-	1	-
Clause 4.4 Table 2 -iii) - b("Minimum cross section of the stud, mm, Size 3 to 13 (Children)")	-	1	-
Clause 4.4 Table 2 -iv) - a("Stud bolt, mm Diameter/edge to edge length")	-	1	-
Clause 4.4 Table 2 -iv) - b("Stud bolt, mm Thickness")	-	1	-
Clause 4.4 Table 3 -i)("Toe post attachment strength, N, Min")	-	1	-
Clause 4.4 Table 3 -ii)("Attachment strength of rear strap, N, Min")	-	1	-
Clause 4.4 Table 3 -iii)("Inter layer bond strength, N/mm, Min")	-	1	-
Cl-4 ((Amendment No-1)(Category And Type)	-	1	-
Cl-4.4, Table -1 S. No-1 (i) (Amendment No-1)(Compression set at constant stress)	-	1	-
Cl-4.4, Table -1 S. No-1 (ii) (Amendment No-1)(Split tear strength)	-	1	-
Cl-4.4, Table -1 S. No-1 (iii) (a)(Amendment No-1)("Shrinkage at Shrinkage at 50 °C ± 1 °C for 2 h for polymeric material, percent, Max ")	-	1	-
Cl-4.4, Table -1 S. No-1 (iii)(b) (Amendment No-1)(Shrinkage at 100 °C ± 1 °C for 1 h for rubber, percent, Max)	-	1	-
Cl-4.4, Table -1 S. No-1 (iv) (Amendment No-1)(Abrasion resistance at applied force)	-	1	-
Cl-4.4, Table -1 S. No-1 (v) (Amendment No-1)(Flexing resistance: Maximum cut growth,)	-	1	-
Cl-4.4, Table -1 S. No-1 (vi) (Amendment No-1)(Hydrolysis resistance:Maximum cut growth)	-	1	-
Cl-4.4, Table -1 S. No-1 (vii) (Amendment No-1)(Chemical requirements)	-	1	-
Cl-4.4, Table -1 S. No-1 (viii) (Amendment No-1)("Lead content (as Pb), ppm, Max")	-	1	-
Cl-4.4, Table -2 S. No-1 (i), a (Amendment No-1)("Breaking strength for Strap to strap 1-Solid strap 2-Cellular strap")	-	1	-
Cl-4.4, Table -2 S. No-1 (i), b (Amendment No-1)("Breaking strength for Toe portion to strap 1-Solid strap 2-Cellular strap")	-	1	-
Cl-4.4, Table -2 S. No-1 (i), c (Amendment No-1)("Elongation at break , percent, Min 1-Solid strap 2-Cellular strap")	-	1	-
Cl-4.4, Table -2 S. No-1 (ii), (Amendment No-1)(Chemical requirements)	-	1	-
Cl-4.4, Table -2 S. No-1 (iii), (Amendment No-1)(Lead content (as Pb), in ppm, Max)	-	1	-
Cl-4.4, Table -3 S. No-1 (i), (Amendment No-1)(Toe post attachment strength)	-	1	-
Cl-4.4, Table -3 S. No-1 (ii), (Amendment No-1)(Attachment strength of rear strap)	-	1	-
Cl-4.4, Table -3 S. No-1 (iii), (Amendment No-1)(Inter layer bond strength)	-	1	-
Cl.4.4 - Table No 1 - Sl. No.-vii(pH- IS 1390:2022)	-	1	-
Cl.4.4 - Table No 1 - Sl. No.-viii("Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988")	-	1	-
Cl. No.5.1,Table no.1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	1	-
Cl. No.5.1,Table no.1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	1	-
Cl. No.5.1,Table no.1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	1	-
Cl. No.5.1,Table no.1 of IS 17011(iv)(Chromium (VI))	-	1	-
Cl. No.5.1,Table no.1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	1	-
Cl. No.5.1,Table no.1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	1	-
Cl. No.5.1,Table no.1 of IS 17011(vii)(Formaldehyde)	-	1	-
Cl. No.5.1,Table no.1 of IS 17011(viii)(Organotin compounds)	-	1	-
Cl. No.5.1,Table no.1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	1	-
Cl. No.5.1,Table no.1 of IS 17011(x)(pH)	-	1	-
Cl. No.5.1,Table no.1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	1	-
Cl. No.5.1,Table no.1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	1	-
4.1(Material)	-	1	-
4.2(Length)	-	1	-
4.3(Thickness)	-	11	-
4.4 , Table No. 1 , i)(Density)	-	1	-
4.4 , Table No. 1 , ii)(2Compression set at constant stress)	-	1	-
4.4 , Table No. 1 , iii)(3Split tear strength)	-	1	-
4.4 , Table No. 1 , iv)("Shrinkage at 50 ºC ± 1 ºC for 24 h for polymeric material, Shrinkage at 100 ºC ± 1 ºC for 1 h for rubber")	-	1	-
4.4 , Table No. 1 , v)(5Abrasion resistance at applied force)	-	1	-
4.4 , Table No. 1 , vi)(Flexing resistance: Maximum cut growth at 50 000 flexes)	-	1	-
4.4 , Table No. 1 , vii)(7 Hydrolysis resistance, Maximum cut growth at 50 000 flexes)	-	1	-
4.4 , Table No . 2 , i)(Density , Solid strap, Cellular strap)	-	1	-
4.4 , Table No . 2 , ii)("Breaking strength , Strap to strap and Toe portion to strap , Elongation at break")	-	1	-
4.4 , Table No . 2 , iii)(Minimum cross section of the stud)	-	1	-
4.4 , Table No . 2 , iv)(Stud bolt)	-	1	-
4.4 , Table No . 3 , i)(Toe post attachment strength)	-	1	-
4.4 , Table No . 3 , ii)(Attachment strength of rear strap)	-	1	-
4.4 , Table No . 3 , iii)(Inter layer bond strength)	-	1	-
5(CHEMICAL REQUIREMENT FOR HAWAI CHAPPAL)	-	1	-
6(MARKING AND PACKING)	-	1	-
Cl.No. 5.2(lead content)	-	1	-
Clause 4.1 - 4.1.1(Bottom Material)	-	1	-
Clause 4.1 - 4.1.2(Strap Material)	-	1	-
Clause 4.1 - 4.1.3(Material)	-	1	-
Clause 4.1 - 4.1.4(Material)	-	1	-
Clause 4.2(Material)	-	1	-
Clause 4.3 - 4.3.1(Thickness)	-	1	-
Clause 4.3 - 4.3.2(Thickness)	-	1	-
Clause 4.4 Table 1 -i)(Density, g/cm3, Min)	-	1	-
Clause 4.4 Table 1 -iii)(Split tear strength, kg, Min)	-	1	-
Clause 4.4 Table 1 -iv) - a("Shrinkage at 50 ºC ± 1 ºC for 24 h for polymeric material, percent, Max")	-	1	-
Clause 4.4 Table 1 -iv) - b(Shrinkage at 100 ºC ± 1 ºC for 1 h for rubber, percent, Max)	-	1	-
Clause 4.4 Table 1 -v)(Abrasion resistance at applied force 5 N)	-	1	-
Clause 4.4 Table 2 -i) - a("Density, g/cm3 Solid strap ")	-	1	-
Clause 4.4 Table 2 -i) - b(Density, g/cm3 Cellular strap)	-	1	-
Clause 4.4 Table 2 -ii) - a - 1("Breaking strength, kgf, Min Strap to strap(Solid Strap)")	-	1	-
Clause 4.4 Table 2 -ii) - a - 2("Breaking strength, kgf, Min Strap to strap(Cellular Strap)")	-	1	-
Clause 4.4 Table 2 -ii) - a - 3("Breaking strength, kgf, Min Toe portion to strap(Solid Strap)")	-	1	-
Clause 4.4 Table 2 -ii) - a - 4("Breaking strength, kgf, Min Toe portion to strap(Cellular Strap)")	-	1	-
Clause 4.4 Table 2 -ii) - b - 1("Elongation at break, percent (Applicable to strap to strap (V shape) Solid Strap")	-	1	-
Clause 4.4 Table 2 -ii) - b - 2("Elongation at break, percent (Applicable to strap to strap (V shape) Cellular Strap")	-	1	-
Clause 4.4 Table 2 -iii) - a("Minimum cross section of the stud, mm, Size 1 to 13 (Adult)")	-	1	-
Clause 4.4 Table 2 -iii) - b("Minimum cross section of the stud, mm, Size 3 to 13 (Children)")	-	1	-
Clause 4.4 Table 2 -iv) - a("Stud bolt, mm Diameter/edge to edge length")	-	1	-
Clause 4.4 Table 2 -iv) - b("Stud bolt, mm Thickness")	-	1	-
Clause 4.4 Table 3 -i)("Toe post attachment strength, N, Min")	-	1	-
Clause 4.4 Table 3 -ii)("Attachment strength of rear strap, N, Min")	-	1	-
Clause 4.4 Table 3 -iii)("Inter layer bond strength, N/mm, Min")	-	1	-
Cl-4 ((Amendment No-1)(Category And Type)	-	1	-
Cl-4.4, Table -1 S. No-1 (i) (Amendment No-1)(Compression set at constant stress)	-	1	-
Cl-4.4, Table -1 S. No-1 (ii) (Amendment No-1)(Split tear strength)	-	1	-
Cl-4.4, Table -1 S. No-1 (iii) (a)(Amendment No-1)("Shrinkage at Shrinkage at 50 °C ± 1 °C for 2 h for polymeric material, percent, Max ")	-	1	-
Cl-4.4, Table -1 S. No-1 (iii)(b) (Amendment No-1)(Shrinkage at 100 °C ± 1 °C for 1 h for rubber, percent, Max)	-	1	-
Cl-4.4, Table -1 S. No-1 (iv) (Amendment No-1)(Abrasion resistance at applied force)	-	1	-
Cl-4.4, Table -1 S. No-1 (v) (Amendment No-1)(Flexing resistance: Maximum cut growth,)	-	1	-
Cl-4.4, Table -1 S. No-1 (vi) (Amendment No-1)(Hydrolysis resistance:Maximum cut growth)	-	1	-
Cl-4.4, Table -1 S. No-1 (vii) (Amendment No-1)(Chemical requirements)	-	1	-
Cl-4.4, Table -1 S. No-1 (viii) (Amendment No-1)("Lead content (as Pb), ppm, Max")	-	1	-
Cl-4.4, Table -2 S. No-1 (i), a (Amendment No-1)("Breaking strength for Strap to strap 1-Solid strap 2-Cellular strap")	-	1	-
Cl-4.4, Table -2 S. No-1 (i), b (Amendment No-1)("Breaking strength for Toe portion to strap 1-Solid strap 2-Cellular strap")	-	1	-
Cl-4.4, Table -2 S. No-1 (i), c (Amendment No-1)("Elongation at break , percent, Min 1-Solid strap 2-Cellular strap")	-	1	-
Cl-4.4, Table -2 S. No-1 (ii), (Amendment No-1)(Chemical requirements)	-	1	-
Cl-4.4, Table -2 S. No-1 (iii), (Amendment No-1)(Lead content (as Pb), in ppm, Max)	-	1	-
Cl-4.4, Table -3 S. No-1 (i), (Amendment No-1)(Toe post attachment strength)	-	1	-
Cl-4.4, Table -3 S. No-1 (ii), (Amendment No-1)(Attachment strength of rear strap)	-	1	-
Cl-4.4, Table -3 S. No-1 (iii), (Amendment No-1)(Inter layer bond strength)	-	1	-
Cl.4.4 - Table No 1 - Sl. No.-vii(pH- IS 1390:2022)	-	1	-
Cl.4.4 - Table No 1 - Sl. No.-viii("Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988")	-	1	-
Cl. No.5.1,Table no.1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	1	-
Cl. No.5.1,Table no.1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	1	-
Cl. No.5.1,Table no.1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	1	-
Cl. No.5.1,Table no.1 of IS 17011(iv)(Chromium (VI))	-	1	-
Cl. No.5.1,Table no.1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	1	-
Cl. No.5.1,Table no.1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	1	-
Cl. No.5.1,Table no.1 of IS 17011(vii)(Formaldehyde)	-	1	-
Cl. No.5.1,Table no.1 of IS 17011(viii)(Organotin compounds)	-	1	-
Cl. No.5.1,Table no.1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	1	-
Cl. No.5.1,Table no.1 of IS 17011(x)(pH)	-	1	-
Cl. No.5.1,Table no.1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	1	-
Cl. No.5.1,Table no.1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	1	-

19 Jan, 2027

-
Included w.e.f 14.01.2025

11481

Arbro Pharmaceuticals Private Limited

8116816

IS 10500 (2012)

Drinking water - Specification (Second Revision)

23850 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4. SL No.i)of Table I(Colour)	-	100	-
4.SL No.ii) of Table I(Odour)	-	100	-
4.SL No.iii)of Table I(pH)	-	150	-
4.SL No.v)of Table I(Turbidity, NTU, Max)	-	150	-
4.SL No.vi)of Table I(Total dissolved solids, mg/l, max)	-	200	-
table 2 sl.no 1( Aluminium (as Al), mg/l, Max)	-	200	-
table 2 sl.no 2(Ammonia (as total ammonia-N), mg/l, Max)	-	200	-
table 2 sl.no 3(Anionic detergents (as MBAS), mg/l, Max)	-	200	-
table 2 sl.no 4(Barium (as Ba), mg/l, Max)	-	200	-
table 2 sl.no 5(Boron (as B), mg/l, Max)	-	200	-
table 2 sl.no 6(Calcium (as Ca), mg/l, Max)	-	200	-
table 2 sl.no 7(Calcium (as Ca), mg/l, Max)	-	200	-
table 2 sl.no 8(Calcium (as Ca), mg/l, Max)	-	200	-
table 2 sl.no 9(Copper (as Cu), mg/l, Max)	-	200	-
table 2 sl.no 10( Fluoride (as F) mg/l, Max)	-	200	-
table 2 sl.no 11(Free residual chlorine, mg/l, Min)	-	200	-
table 2 sl.no 12(Iron (as Fe), mg/l, Max)	-	200	-
table 2 sl.no 13(Magnesium (as Mg), mg/l, Max)	-	200	-
table 2 sl.no 14(Manganese (as Mn), mg/l, Max)	-	200	-
table 2 sl.no 15(Mineral oil, mg/l, Max)	-	350	-
table 2 sl.no 16(Nitrate (as NO3), mg/l, Max)	-	200	-
table 2 sl.no 17(Phenolic compounds (as C6H5OH), mg/l, Max)	-	300	-
table 2 sl.no 18(Selenium (as Se), mg/l, Ma)	-	200	-
table 2 sl.no 19(Silver (as Ag), mg/l, Max)	-	200	-
table 2 sl.no 20(Sulphate (as SO4) mg/l, Max)	-	200	-
table 2 sl.no 21(Sulphide (as H2S), mg/l, Max)	-	200	-
table 2 sl.no 22(Total alkalinity as calcium carbonate, mg/l, Max)	-	200	-
table 2 sl.no 23(Total hardness (as CaCO3 mg/l, Max)	-	200	-
table 2 sl.no 24(Zinc (as Zn), mg/l, Max)	-	200	-
TABLE 3 sl no 1(Cadmium (as Cd), mg/l, Max)	-	200	-
TABLE 3 sl no 2(Cyanide (as CN), mg/l, Max)	-	700	-
TABLE 3 sl no 3(Lead (as Pb), mg/l, Max)	-	200	-
TABLE 3 sl no 4(Mercury (as Hg), mg/l, Max)	-	200	-
TABLE 3 sl no 5( Molybdenum (as Mo), mg/l, Max)	-	200	-
TABLE 3 sl no 6(Nickel (as Ni), mg/l, Max)	-	200	-
TABLE 3 sl no 7(Pesticides, µg/l, Max)	-	1200	-
TABLE 3 sl no 8(Polychlorinated biphenyls, mg/l,)	-	400	-
TABLE 3 sl no 9(Polynuclear aromatic hydro-carbons (as PAH), mg/l, Max)	-	400	-
TABLE 3 sl no 10(Total arsenic (as As), mg/l, Max)	-	200	-
TABLE 3 sl no 11(Total chromium (as Cr), mg/l, Max)	-	200	-
TABLE 3 sl no 12(Bromoform, mg/l, Max)	-	200	-
TABLE 3 sl no 13(Dibromochloromethane,)	-	200	-
TABLE 3 sl no 14(Dibromochloromethane,mg/l, Max)	-	200	-
TABLE 3 sl no 15(Chloroform, mg/l, Max)	-	200	-
TABLE 5 sl no 1(Alachlor)	-	1200	Total pesticides
TABLE 5 sl no 2(Atrazine)	-	1200	Total pesticides
TABLE 5 sl no 4( Alpha HCH)	-	1200	Total pesticides
TABLE 5 sl no 5(Beta HCH)	-	1200	Total pesticides
TABLE 5 sl no 6(Butachlor)	-	1200	Total pesticides
TABLE 5 sl no 7(Chlorpyriphos)	-	1200	Total pesticides
TABLE 5 sl no 8(Delta HCH)	-	1200	Total pesticides
TABLE 5 sl no 9(2,4- Dichlorophenoxyacetic acid)	-	1200	Total pesticides
TABLE 5 sl no 10( DDT (o, p and p, p – Isomers of DDT, DDE and DDD))	-	1200	Total pesticides
TABLE 5 sl no 11(Endosulfan (alpha, beta, and sulphate))	-	1200	Total pesticides
TABLE 5 sl no 12( Ethion)	-	1200	Total pesticides
TABLE 5 sl no 13(Gamma — HCH (Lindane))	-	1200	Total pesticides
TABLE 5 sl no 14( Isoproturon)	-	1200	Total pesticides
TABLE 5 sl no 15(Malathion)	-	1200	Total pesticides
TABLE 5 sl no 16(Methyl parathion)	-	1200	Total pesticides
TABLE 5 sl no 17(Monocrotophos)	-	1200	Total pesticides
TABLE 5 sl no 18(Phorate)	-	1200	Total pesticides
TABLE 6 sl no 1(All water intended for drinking: a) E. coli or thermotolerant coliform bacteri)	-	300	-
TABLE 6 sl no 2(Treated water entering the distribution system: a) E. coli or thermotolerant coliform bacteria)	-	300	-
TABLE 6 sl no 3(b) Total coliform bacteria)	-	300	-
TABLE 6 sl no 5(b) Total coliform bacteria)	-	300	-
4.3.8 (Cryptosporidium )	-	8000	Cryptosporidium and Giardia
4.2.7(4.2.7 MS2 phage)	-	3000	-
Table 3, x)(Uranium)	-	1500	-
Table 5(Aldrin and Dieldrin )	-	1200	Total pesticides
Table 3 (Clause 4)xii) Trihalomethanes: (b)(Bromodichloromethane)	-	800	Total Trihalomethanes
Table 1 clause(iv)(Taste)	-	100	-
4, Table 2, Sr. no. vii(Chloramines)	-	200	-
4, Table 2, Sr.no. viii(Chloride)	-	200	-
4.3.9(Giardia)	-	8000	Cryptosporidium and Giardia
Table 3, x)(Uranium)	-	1500	-
Table 5(Aldrin and Dieldrin )	-	1200	Total pesticides
Table 3 (Clause 4)xii) Trihalomethanes: (b)(Bromodichloromethane)	-	800	-
Table 1 clause(iv)(Taste)	-	100	-
4, Table 2, Sr. no. vii(Chloramines)	-	200	-
4, Table 2, Sr.no. viii(Chloride)	-	200	-
4.3.9(Giardia)	-	8000	Cryptosporidium and Giardia
Table 3, x)(Uranium)	-	1500	-
Table 5(Aldrin and Dieldrin )	-	1200	Total pesticides
Table 3 (Clause 4)xii) Trihalomethanes: (b)(Bromodichloromethane)	-	800	-
Table 1 clause(iv)(Taste)	-	100	-
4, Table 2, Sr. no. vii(Chloramines)	-	200	-
4, Table 2, Sr.no. viii(Chloride)	-	200	-
4.3.9(Giardia)	-	8000	Cryptosporidium and Giardia

14 Jan, 2029

-
Included w.e.f. 06.07.2023. Exclusion: Cl.4, Table-4,I,a (Alpha Emitters), Cl.4, Table-4,I,b (Beta Emitters), Cl.4.2.7 (MS2 Phage Viruses), Cl.4.3.8 (Cryptosporidium) and Cl.4.3.9 (Giardia)

11482

Central Power Research Institute (CPRI), Bangalore

6101024

IS/IEC 60947 : Part 2 (2016)

Low - Voltage switchgear and controlgear: Part 2 circuit - Breakers (First Revision)

579250 View breakup
For all test sequences Rs.579250/-; Test Sequence I: Rs.188550/-; Test Sequence II: Rs.94850/-; Test Sequence III: Rs.64350/-; Test Sequence IV: Rs.110650/-; Test Sequence V: Rs.120850/-; Combined test Sequence : Rs.143900/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.3.3.4(Mechanical operation and operational performance capability)	-	33850	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice
8.3.3.2(Tripping limits and characteristics)	-	48150	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice
8.3.3.3(Test of dielectric properties)	-	47250	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice
8.3.3.5(Overload performance)	-	35550	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice
8.3.3.6(Verification of dielectric withstand)	-	10200	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice
8.3.3.7(Verification of temperature-rise)	-	9150	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice
8.3.3.8(Verification of Overload releases)	-	1700	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice
8.3.3.9(Verification of undervoltage and shunt releases)	-	1700	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice
8.3.3.10(Verification of main contact position)	-	2700	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice
8.3.4.2(Test of service short circuit breaking capacity)	-	43950	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice
8.3.4.3(verification of operational performance capability (sequence II))	-	23050	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice
8.3.4.4(Verification of dielectric withstand)	-	10200	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice
8.3.4.5(Verifiation of temperature-rise)	-	9150	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice
8.3.4.6(Verification of Overload releases)	-	1700	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice
8.3.5.2(Verification of Overload releases)	-	1700	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice
8.3.5.3(Rated ultimate short-circuit breaking capacity)	-	43950	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice
8.3.5.4(Verification of dielectric withstand)	-	10200	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice
8.3.5.5(verification of overload releases (sequence III))	-	1700	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice
8.3.6.2(Verification of Overload releases)	-	1700	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice
8.3.6.3(Rated short-time withstand current)	-	43950	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice
8.3.6.4(verification of temperature-rise (sequence IV))	-	9150	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice
8.3.6.5(short circuit breaking capacity at maximum short time withstand current (sequence IV))	-	43950	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice
8.3.6.6(verification of dielectric withstand (sequence IV))	-	10200	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice
8.3.3.2(Tripping limits and characteristics)	-	48150	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice
8.3.3.3(Test of dielectric properties)	-	47250	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice
8.3.3.4(Mechanical operation and operational performance capability)	-	33850	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice
8.3.3.5(Overload performance)	-	35550	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice
8.3.3.6(Verification of dielectric withstand)	-	10200	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice
8.3.3.7(Verification of temperature-rise)	-	9150	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice
8.3.3.8(Verification of Overload releases)	-	1700	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice
8.3.3.9(Verification of undervoltage and shunt releases)	-	1700	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice
8.3.3.10(Verification of main contact position)	-	2700	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice
8.3.4.2(Test of service short circuit breaking capacity)	-	43950	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice
8.3.4.3(verification of operational performance capability (sequence II))	-	23050	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice
8.3.4.4(Verification of dielectric withstand)	-	10200	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice
8.3.4.5(Verifiation of temperature-rise)	-	9150	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice
8.3.4.6(Verification of Overload releases)	-	1700	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice
8.3.5.2(Verification of Overload releases)	-	1700	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice
8.3.5.3(Rated ultimate short-circuit breaking capacity)	-	43950	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice
8.3.5.4(Verification of dielectric withstand)	-	10200	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice
8.3.5.5(verification of overload releases (sequence III))	-	1700	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice
8.3.6.2(Verification of Overload releases)	-	1700	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice
8.3.6.3(Rated short-time withstand current)	-	43950	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice
8.3.6.4(verification of temperature-rise (sequence IV))	-	9150	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice
8.3.6.5(short circuit breaking capacity at maximum short time withstand current (sequence IV))	-	43950	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice
8.3.6.6(verification of dielectric withstand (sequence IV))	-	10200	Test Charges will vary depending on the rating of the sample Test charge applicable will be intimated through a proforma invoice
8.3.3.2(Tripping limits and characteristics)	-	-	-
8.3.3.3(Test of dielectric properties)	-	-	-
8.3.3.4(Mechanical operation and operational performance capability)	-	-	-
8.3.3.5(Overload performance)	-	-	-
8.3.3.6(Verification of dielectric withstand)	-	-	-
8.3.3.7(Verification of temperature-rise)	-	-	-
8.3.3.8(Verification of Overload releases)	-	-	-
8.3.3.9(Verification of undervoltage and shunt releases)	-	-	-
8.3.3.10(Verification of main contact position)	-	-	-
8.3.4.2(Test of service short circuit breaking capacity)	-	-	-
8.3.4.3(verification of operational performance capability (sequence II))	-	-	-
8.3.4.4(Verification of dielectric withstand)	-	-	-
8.3.4.5(Verifiation of temperature-rise)	-	-	-
8.3.4.6(Verification of Overload releases)	-	-	-
8.3.5.2(Verification of Overload releases)	-	-	-
8.3.5.3(Rated ultimate short-circuit breaking capacity)	-	-	-
8.3.5.4(Verification of dielectric withstand)	-	-	-
8.3.5.5(verification of overload releases (sequence III))	-	-	-
8.3.6.2(Verification of Overload releases)	-	-	-
8.3.6.3(Rated short-time withstand current)	-	-	-
8.3.6.4(verification of temperature-rise (sequence IV))	-	-	-
8.3.6.5(short circuit breaking capacity at maximum short time withstand current (sequence IV))	-	-	-
8.3.6.6(verification of dielectric withstand (sequence IV))	-	-	-

31 Dec, 2026

-
REVISED VERSION OF IS 60947(PART-2):2016 INCLUDED W.E.F. 10-06-2021.

11483

Accurate Universal Laboratoies Private Limited, Ahmedabad

7174006

IS 7224 (2006)

Iodized salt, vacuum evaporated iodized salt and refined iodized salt - Specification (Second Revision)

N.A.

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause no4.1(Description)	-	100	-
Clause 4.2(Particle Size)	-	300	-
4.4(Anticaking agents (Potassium Ferrocyanide))	-	300	-
Clause 4.3 Table 1(Moisture content)	-	300	-
Clause 4.3 Table 1(water insoluble matter)	-	600	-
Clause 4.3 Table 1(Chloride Content(as Nacl))	-	300	-
Clause 4.3 Table 1(Matter soluble in water other than sodium chloride)	-	300	-
Clause 4.3 Table 1(Calcium (as Ca))	-	300	-
Clause 4.3 Table 1(Magnesium (as mg))	-	300	-
Clause 4.3 Table 1(Sulphate (as SO4 ),)	-	600	-
Clause 4.3 Table 1(Iodine content, a) Manufacturers Level )	-	600	-
Clause 4.3 Table 1(b) Distribution channel including retailer)	-	600	-
Clause 4.3 Table 1(Alkalinity (as Na2CO3),)	-	300	-
Clause 4.3 Table 1(Lead as (Pb))	-	600	-
Clause 4.3 Table 1(Arsenic(as As))	-	600	-
Clause 4.3 Table 1(Iron(as Fe))	-	600	-

19 Sep, 2029

-
-

11484

BIS, Central Laboratory (CL)

None

IS 14756 (2022)

Draft Indian Standard STAINLESS STEEL COOKWARE SPECIFICATION Second Revision of IS 14756

Please See Remerk View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
As per Clause 3 (Carbon)	-
As per Clause 3 (Silicon)	-
As per Clause 3 (Manganese)	-
As per Clause 3 (Nickel)	-
As per Clause 3 (Chromium)	-
As per Clause 3 (Sulphur)	-
As per Clause 3 (phosphorus)	-
As per Clause 3 (Nitrogen)	-
As per Clause 3 (Titanium)	-
As per Clause 3 (Aluminium)	-
As per Clause 3 (Copper)	-
As per Clause 3 (Magnesium)	-
As per Clause 3 (Iron)	-
As per Clause 3 (Zinc)	-
As per Clause 3 (Arsenic)	-
As per Clause 3 (Antimony)	-
As per Clause 3 (Bismith)	-
As per Clause 3 (Lead)	-
As per Clause 3 (Tellurium)	-
4.1 (Annex A) (Shapes and Dimensions)	-
4.2 (Table 1) (Shapes and Dimensions)	-
4.2 (Table 1) (Shapes and Dimensions)	-
4.2 (Shapes and Dimensions)	-
4.3 (Shapes and Dimensions)	-
4.4 (Shapes and Dimensions)	-
5.1 (Workmanship and Finish)	-
5.1 (Workmanship and Finish)	-
5.1 (Workmanship and Finish)	-
5.2 (Workmanship and Finish)	-
6.5 (Coating Thickness Test (For Copper Deposit))	-
6.7.1 (Nominal Capacity Test)	-
6.7.2 (Nominal Capacity Test- Diameter)	-
6.8.3 (Tests on Tempered Glass Lid (thermal shock test))	-
6.8.4.1 (Tests on Tempered Glass Lid (Free Fall Test with rim facing down))	-
6.8.4.2 (Tests on Tempered Glass Lid (Free Fall Test without rim facing down))	-
4.2 (Shapes and Dimensions)	-

-
Grade designation as per Cl. 3 may be declared . 5 pcs of 5x5 cm sample having dia > 3mm and/or thickness > 0.8 mm shall be provided

11485

BIS, Eastern Regional Laboratory (ERL)

None

IS 11169 : Part 1 (2022)

Specification for steels for cold heading cold extrusion applications: Part 1 wrought carbon and low alloy steels

For all grades except test mentioned in remarks

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
17 (Shape, Dimensions and tolerances)	-
8.1 (Tensile Test)	-
8.1 (Hardness Test)	-
8.2 (Hardenability (only Applicable to Steel Grades of Annexes B and C))	-
Cl.4.3,7.2 & Table-A.2 (Carbon -IS 228 (P-1) or any other Established instrumental/ chemical method)	-
Cl.4.3,7.2 & Table-A.2 (Manganese- IS 228 (P-2) or any other Established instrumental/ chemical method)	-
Cl.4.3,7.2 & Table-A.2 (Phosphorus- IS 228 (P-3) or any other Established instrumental/ chemical method)	-
Cl.4.3,7.2 & Table-A.2 (Sulphur- IS 228 (P-9) or any other Established instrumental/ chemical method)	-
Cl.4.3,7.2 & Table-A.2 (Silicon- IS 228 (P-8) or any other Established instrumental/ chemical method)	-
Cl.4.3,7.2 & Table-A.2 (Nikel- Relevant parts of IS 228 or any other established international instrumental/chemical method)	-
Cl.4.3,7.2 & Table-A.2 (Copper- IS 228 (P-15) or any other Established instrumental/ chemical method)	-
Cl.4.3,7.2 & Table-A.2 (Chromium- Relevant parts of IS 228 or any other established international instrumental/chemical method)	-
Cl.4.3,7.2 & Table-A.2 (Molybdenum- Relevant parts of IS 228 or any other established international instrumental/chemical method)	-
CL 7.2 (Diameter ( average 8))	-
Cl. 7 (Carbon)	-
Cl. 7 (Silicon)	-
Cl. 7 (Manganese)	-
Cl. 7 (Phosphorous)	-
Cl. 7 (Sulphur)	-
Cl. 7 (Chromium)	-
Cl. 7 (Nickel)	-
Cl. 7 (Molybdenum)	-
Cl. 7 (Aluminium)	-
Cl. 7 (Boron)	-
Cl. 7 (Copper)	-

-
Prepared sample should be provided for hardenability test. Mech: Facility not available for 14.1.3.1Eddy current test Chem: Except V, Sn

11486

CIPET: CENTRE FOR SKILLING AND TECHNICAL SUPPORT (CSTS) - (CIPET), AURANGABAD

7123534

IS 16187 (2014)

Textiles - High density polyethylene (HDPE)/ polypropylene (PP) leno woven sacks for packaging and storage of fruits and vegetables - Specification

29530 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause no. 3.1(Raw Material, as applicable: PP Granules (IS 10910) Overall Migration)	-	2000	-
Clause no. 3.1(Raw Material, as applicable: PP Granules (IS 10910) Overall Migration)	-	2000	-
Clause no. 3.1(Colorants, if used (IS 9833): Toxic Elements)	-	2200	-
Clause no. 3.1(Lead)	-	3000	-
Clause no. 3.1(Arsenic)	-	0	-
Clause no. 3.1(Mercury)	-	0	-
Clause no. 3.1(Cadmium)	-	0	-
Clause no. 3.1(Zinc)	-	0	-
Clause no. 3.1(Selenium)	-	0	-
Clause no. 3.1(Barium)	-	0	-
Clause no. 3.1(Chromium)	-	0	-
Clause no. 3.1(Antimony)	-	0	-
Clause no. 3.1(Total primary aromatic amines (calculated as aniline equivalent))	-	0	-
Clause no. 3.1(Sulphonated aromatic amines (calculated as aniline sulphonic acid))	-	0	-
Clause no. 3.1(Polychlorinated biphenyl (reported as decachloro biphenyl))	-	0	-
Clause no. 3.1(Carcinogenic amine)	-	0	-
Clause no. 3.1(Raw Material, as applicable: HDPE Granules (IS7328))	-	2000	-
Clause no. 3.1(Density)	-	700	-
Clause no. 3.1(Melt flow Index)	-	1100	-
Clause no. 3.1(Colorants, if used (IS 9833): Toxic Elements)	-	2200	-
Clause no. 3.1(Lead)	-	3000	-
Clause no. 3.1(Arsenic)	-	0	-
Clause no. 3.1(Mercury)	-	0	-
Clause no. 3.1(Cadmium)	-	0	-
Clause no. 3.1(Zinc)	-	0	-
Clause no. 3.1(Selenium)	-	0	-
Clause no. 3.1(Barium)	-	0	-
Clause no. 3.1(Chromium)	-	0	-
Clause no. 3.1(Antimony)	-	0	-
Clause no. 3.1(Total primary aromatic amines (calculated as aniline equivalent))	-	0	-
Clause no. 3.1(Sulphonated aromatic amines (calculated as aniline sulphonic acid))	-	0	-
Clause no. 3.1(Polychlorinated biphenyl (reported as decachloro biphenyl))	-	0	-
Clause no. 3.1(Carcinogenic amine)	-	0	-
3.1(Raw Material - The tape shall be manufactured from virgin food grade high density polyethylene (HDPE)/polypropylene (PP))	-	500	-
3.2(Fabric - The fabric used in the manufacture of HDPE/PP leno woven sacks shall be woven as a tube on circular loom from HDPE/PP tapes having width in the range of 2.0-2.5 mm)	-	500	-
3.3.1(Sack - Leno sacks fabricated out of woven fabric shall have seam at the bottom and/or side.The stitching shall be done with two rows of either lock stitch or chain stitch)	-	500	-
3.3.2(The tape or thread used for stitching shall have at least 20 percent higher denier than that used for making of the sack)	-	500	-
3.3.3(Sack - Bag Mouth)	-	500	-
3.3.4("Sack - sacks shall have nominal holding capacities of 25 kg and Type 2, sacks shall have nominal holding capacities of 50 kg")	-	500	-
4.1- Table 1- i)(Requirements of HDPE/PP Leno Woven Sacks - Capacity)	-	500	-
4.1- Table 1- ii)(Requirements of HDPE/PP Leno Woven Sacks - Dimensions, cm a) Inside length b) Inside width)	-	500	-
4.1- Table 1- iii)(Requirements of HDPE/PP Leno Woven Sacks - Mass of fabric, g/m2)	-	500	-
4.1- Table 1- iv)(Requirements of HDPE/PP Leno Woven Sacks - Ends per dm)	-	2200	-
4.1- Table 1- v)(Requirements of HDPE/PP Leno Woven Sacks - Picks per dm)	-	2200	-
4.1- Table 1- vi)(Requirements of HDPE/PP Leno Woven Sacks - Average breaking strength of fabric (cut strip method), N (kgf) a) Lengthwise b) Widthwise)	-	2200	-
4.1- Table 1- vii)(Requirements of HDPE/PP Leno Woven Sacks - Average breaking strength of bottom /side seam (cut strip method), N (kgf))	-	2200	-
4.2(Requirements - UV Resistance)	-	8480	-
4.3(Requirements - Mass of Bale As per Annex C)	-	500	-
5.1(LABELLING, PACKING AND MARKING - Labelling on Sacks)	-	500	-
5.2(Packing)	-	500	-
5.3(Marking)	-	500	-
6(ATMOSPHERIC CONDITIONS, CONDITIONING AND TESTING)	-	500	-
Clause no. 3.1(Raw Material, as applicable: PP Granules (IS 10910) Overall Migration)	-	1050	-
Clause no. 3.1(Colorants, if used (IS 9833): Toxic Elements)	-	2000	-
Clause no. 3.1(Lead)	-	0	-
Clause no. 3.1(Arsenic)	-	0	-
Clause no. 3.1(Mercury)	-	0	-
Clause no. 3.1(Cadmium)	-	0	-
Clause no. 3.1(Zinc)	-	0	-
Clause no. 3.1(Selenium)	-	0	-
Clause no. 3.1(Barium)	-	0	-
Clause no. 3.1(Chromium)	-	0	-
Clause no. 3.1(Antimony)	-	0	-
Clause no. 3.1(Total primary aromatic amines (calculated as aniline equivalent))	-	0	-
Clause no. 3.1(Sulphonated aromatic amines (calculated as aniline sulphonic acid))	-	0	-
Clause no. 3.1(Polychlorinated biphenyl (reported as decachloro biphenyl))	-	0	-
Clause no. 3.1(Carcinogenic amine)	-	0	-
Clause no. 3.1(Raw Material, as applicable: HDPE Granules (IS7328))	-	0	-
Clause no. 3.1(Density)	-	700	-
Clause no. 3.1(Melt flow Index)	-	0	-
Clause no. 3.1(Colorants, if used (IS 9833): Toxic Elements)	-	0	-
Clause no. 3.1(Lead)	-	0	-
Clause no. 3.1(Arsenic)	-	0	-
Clause no. 3.1(Mercury)	-	0	-
Clause no. 3.1(Cadmium)	-	0	-
Clause no. 3.1(Zinc)	-	0	-
Clause no. 3.1(Selenium)	-	0	-
Clause no. 3.1(Barium)	-	0	-
Clause no. 3.1(Chromium)	-	0	-
Clause no. 3.1(Antimony)	-	0	-
Clause no. 3.1(Total primary aromatic amines (calculated as aniline equivalent))	-	0	-
Clause no. 3.1(Sulphonated aromatic amines (calculated as aniline sulphonic acid))	-	0	-
Clause no. 3.1(Polychlorinated biphenyl (reported as decachloro biphenyl))	-	0	-
Clause no. 3.1(Carcinogenic amine)	-	0	-
3.1(Raw Material - The tape shall be manufactured from virgin food grade high density polyethylene (HDPE)/polypropylene (PP))	-	0	-
3.2(Fabric - The fabric used in the manufacture of HDPE/PP leno woven sacks shall be woven as a tube on circular loom from HDPE/PP tapes having width in the range of 2.0-2.5 mm)	-	0	-
3.3.1(Sack - Leno sacks fabricated out of woven fabric shall have seam at the bottom and/or side.The stitching shall be done with two rows of either lock stitch or chain stitch)	-	0	-
3.3.2(The tape or thread used for stitching shall have at least 20 percent higher denier than that used for making of the sack)	-	0	-
3.3.3(Sack - Bag Mouth)	-	0	-
3.3.4("Sack - sacks shall have nominal holding capacities of 25 kg and Type 2, sacks shall have nominal holding capacities of 50 kg")	-	0	-
4.1- Table 1- i)(Requirements of HDPE/PP Leno Woven Sacks - Capacity)	-	0	-
4.1- Table 1- ii)(Requirements of HDPE/PP Leno Woven Sacks - Dimensions, cm a) Inside length b) Inside width)	-	0	-
4.1- Table 1- iii)(Requirements of HDPE/PP Leno Woven Sacks - Mass of fabric, g/m2)	-	0	-
4.1- Table 1- iv)(Requirements of HDPE/PP Leno Woven Sacks - Ends per dm)	-	0	-
4.1- Table 1- v)(Requirements of HDPE/PP Leno Woven Sacks - Picks per dm)	-	0	-
4.1- Table 1- vi)(Requirements of HDPE/PP Leno Woven Sacks - Average breaking strength of fabric (cut strip method), N (kgf) a) Lengthwise b) Widthwise)	-	0	-
4.1- Table 1- vii)(Requirements of HDPE/PP Leno Woven Sacks - Average breaking strength of bottom /side seam (cut strip method), N (kgf))	-	0	-
4.2(Requirements - UV Resistance)	-	0	-
4.3(Requirements - Mass of Bale As per Annex C)	-	0	-
5.1(LABELLING, PACKING AND MARKING - Labelling on Sacks)	-	0	-
5.2(Packing)	-	0	-
5.3(Marking)	-	0	-
6(ATMOSPHERIC CONDITIONS, CONDITIONING AND TESTING)	-	0	-
Clause no. 3.1(Raw Material, as applicable: PP Granules (IS 10910) Overall Migration)	-	0	-
Clause no. 3.1(Colorants, if used (IS 9833): Toxic Elements)	-	0	-
Clause no. 3.1(Density)	-	0	-
Clause no. 3.1(Melt flow Index)	-	0	-
Clause no. 3.1(Colorants, if used (IS 9833): Toxic Elements)	-	0	-
3.1(Raw Material - The tape shall be manufactured from virgin food grade high density polyethylene (HDPE)/polypropylene (PP))	-	0	-
3.2(Fabric - The fabric used in the manufacture of HDPE/PP leno woven sacks shall be woven as a tube on circular loom from HDPE/PP tapes having width in the range of 2.0-2.5 mm)	-	0	-
3.3.1(Sack - Leno sacks fabricated out of woven fabric shall have seam at the bottom and/or side.The stitching shall be done with two rows of either lock stitch or chain stitch)	-	0	-
3.3.2(The tape or thread used for stitching shall have at least 20 percent higher denier than that used for making of the sack)	-	0	-
3.3.3(Sack - Bag Mouth)	-	0	-
3.3.4("Sack - sacks shall have nominal holding capacities of 25 kg and Type 2, sacks shall have nominal holding capacities of 50 kg")	-	0	-
4.1- Table 1- i)(Requirements of HDPE/PP Leno Woven Sacks - Capacity)	-	0	-
4.1- Table 1- ii)(Requirements of HDPE/PP Leno Woven Sacks - Dimensions, cm a) Inside length b) Inside width)	-	0	-
4.1- Table 1- iii)(Requirements of HDPE/PP Leno Woven Sacks - Mass of fabric, g/m2)	-	0	-
4.1- Table 1- iv)(Requirements of HDPE/PP Leno Woven Sacks - Ends per dm)	-	0	-
4.1- Table 1- v)(Requirements of HDPE/PP Leno Woven Sacks - Picks per dm)	-	0	-
4.1- Table 1- vi)(Requirements of HDPE/PP Leno Woven Sacks - Average breaking strength of fabric (cut strip method), N (kgf) a) Lengthwise b) Widthwise)	-	0	-
4.1- Table 1- vii)(Requirements of HDPE/PP Leno Woven Sacks - Average breaking strength of bottom /side seam (cut strip method), N (kgf))	-	0	-
4.2(Requirements - UV Resistance)	-	0	-
4.3(Requirements - Mass of Bale As per Annex C)	-	0	-
5.1(LABELLING, PACKING AND MARKING - Labelling on Sacks)	-	0	-
5.2(Packing)	-	0	-
5.3(Marking)	-	0	-
6(ATMOSPHERIC CONDITIONS, CONDITIONING AND TESTING)	-	0	-
Clause no. 3.1(Raw Material, as applicable: PP Granules (IS 10910) Overall Migration)	-	0	-
Clause no. 3.1(Colorants, if used (IS 9833): Toxic Elements)	-	0	-
Clause no. 3.1(Density)	-	0	-
Clause no. 3.1(Melt flow Index)	-	0	-
Clause no. 3.1(Colorants, if used (IS 9833): Toxic Elements)	-	0	-
3.1(Raw Material - The tape shall be manufactured from virgin food grade high density polyethylene (HDPE)/polypropylene (PP))	-	0	-
3.2(Fabric - The fabric used in the manufacture of HDPE/PP leno woven sacks shall be woven as a tube on circular loom from HDPE/PP tapes having width in the range of 2.0-2.5 mm)	-	0	-
3.3.1(Sack - Leno sacks fabricated out of woven fabric shall have seam at the bottom and/or side.The stitching shall be done with two rows of either lock stitch or chain stitch)	-	0	-
3.3.2(The tape or thread used for stitching shall have at least 20 percent higher denier than that used for making of the sack)	-	0	-
3.3.3(Sack - Bag Mouth)	-	0	-
3.3.4("Sack - sacks shall have nominal holding capacities of 25 kg and Type 2, sacks shall have nominal holding capacities of 50 kg")	-	0	-
4.1- Table 1- i)(Requirements of HDPE/PP Leno Woven Sacks - Capacity)	-	0	-
4.1- Table 1- ii)(Requirements of HDPE/PP Leno Woven Sacks - Dimensions, cm a) Inside length b) Inside width)	-	0	-
4.1- Table 1- iii)(Requirements of HDPE/PP Leno Woven Sacks - Mass of fabric, g/m2)	-	0	-
4.1- Table 1- iv)(Requirements of HDPE/PP Leno Woven Sacks - Ends per dm)	-	0	-
4.1- Table 1- v)(Requirements of HDPE/PP Leno Woven Sacks - Picks per dm)	-	0	-
4.1- Table 1- vi)(Requirements of HDPE/PP Leno Woven Sacks - Average breaking strength of fabric (cut strip method), N (kgf) a) Lengthwise b) Widthwise)	-	0	-
4.1- Table 1- vii)(Requirements of HDPE/PP Leno Woven Sacks - Average breaking strength of bottom /side seam (cut strip method), N (kgf))	-	0	-
4.2(Requirements - UV Resistance)	-	0	-
4.3(Requirements - Mass of Bale As per Annex C)	-	0	-
5.1(LABELLING, PACKING AND MARKING - Labelling on Sacks)	-	0	-
5.2(Packing)	-	0	-
5.3(Marking)	-	0	-
6(ATMOSPHERIC CONDITIONS, CONDITIONING AND TESTING)	-	0	-
Clause no. 3.1(Raw Material, as applicable: PP Granules (IS 10910) Overall Migration)	-	0	-
Clause no. 3.1(Colorants, if used (IS 9833): Toxic Elements)	-	0	-
Clause no. 3.1(Density)	-	0	-
Clause no. 3.1(Melt flow Index)	-	0	-
Clause no. 3.1(Colorants, if used (IS 9833): Toxic Elements)	-	0	-
3.1(Raw Material - The tape shall be manufactured from virgin food grade high density polyethylene (HDPE)/polypropylene (PP))	-	0	-
3.2(Fabric - The fabric used in the manufacture of HDPE/PP leno woven sacks shall be woven as a tube on circular loom from HDPE/PP tapes having width in the range of 2.0-2.5 mm)	-	0	-
3.3.1(Sack - Leno sacks fabricated out of woven fabric shall have seam at the bottom and/or side.The stitching shall be done with two rows of either lock stitch or chain stitch)	-	0	-
3.3.2(The tape or thread used for stitching shall have at least 20 percent higher denier than that used for making of the sack)	-	0	-
3.3.3(Sack - Bag Mouth)	-	0	-
3.3.4("Sack - sacks shall have nominal holding capacities of 25 kg and Type 2, sacks shall have nominal holding capacities of 50 kg")	-	0	-
4.1- Table 1- i)(Requirements of HDPE/PP Leno Woven Sacks - Capacity)	-	0	-
4.1- Table 1- ii)(Requirements of HDPE/PP Leno Woven Sacks - Dimensions, cm a) Inside length b) Inside width)	-	0	-
4.1- Table 1- iii)(Requirements of HDPE/PP Leno Woven Sacks - Mass of fabric, g/m2)	-	0	-
4.1- Table 1- iv)(Requirements of HDPE/PP Leno Woven Sacks - Ends per dm)	-	0	-
4.1- Table 1- v)(Requirements of HDPE/PP Leno Woven Sacks - Picks per dm)	-	0	-
4.1- Table 1- vi)(Requirements of HDPE/PP Leno Woven Sacks - Average breaking strength of fabric (cut strip method), N (kgf) a) Lengthwise b) Widthwise)	-	0	-
4.1- Table 1- vii)(Requirements of HDPE/PP Leno Woven Sacks - Average breaking strength of bottom /side seam (cut strip method), N (kgf))	-	0	-
4.2(Requirements - UV Resistance)	-	0	-
4.3(Requirements - Mass of Bale As per Annex C)	-	0	-
5.1(LABELLING, PACKING AND MARKING - Labelling on Sacks)	-	0	-
5.2(Packing)	-	0	-
5.3(Marking)	-	0	-
6(ATMOSPHERIC CONDITIONS, CONDITIONING AND TESTING)	-	0	-
Clause no. 3.1(Raw Material, as applicable: PP Granules (IS 10910) Overall Migration)	-	0	-
Clause no. 3.1(Colorants, if used (IS 9833): Toxic Elements)	-	0	-
Clause no. 3.1(Density)	-	0	-
Clause no. 3.1(Melt flow Index)	-	0	-
Clause no. 3.1(Colorants, if used (IS 9833): Toxic Elements)	-	0	-
3.1(Raw Material - The tape shall be manufactured from virgin food grade high density polyethylene (HDPE)/polypropylene (PP))	-	0	-
3.2(Fabric - The fabric used in the manufacture of HDPE/PP leno woven sacks shall be woven as a tube on circular loom from HDPE/PP tapes having width in the range of 2.0-2.5 mm)	-	0	-
3.3.1(Sack - Leno sacks fabricated out of woven fabric shall have seam at the bottom and/or side.The stitching shall be done with two rows of either lock stitch or chain stitch)	-	0	-
3.3.2(The tape or thread used for stitching shall have at least 20 percent higher denier than that used for making of the sack)	-	0	-
3.3.3(Sack - Bag Mouth)	-	0	-
3.3.4("Sack - sacks shall have nominal holding capacities of 25 kg and Type 2, sacks shall have nominal holding capacities of 50 kg")	-	0	-
4.1- Table 1- i)(Requirements of HDPE/PP Leno Woven Sacks - Capacity)	-	0	-
4.1- Table 1- ii)(Requirements of HDPE/PP Leno Woven Sacks - Dimensions, cm a) Inside length b) Inside width)	-	0	-
4.1- Table 1- iii)(Requirements of HDPE/PP Leno Woven Sacks - Mass of fabric, g/m2)	-	0	-
4.1- Table 1- iv)(Requirements of HDPE/PP Leno Woven Sacks - Ends per dm)	-	0	-
4.1- Table 1- v)(Requirements of HDPE/PP Leno Woven Sacks - Picks per dm)	-	0	-
4.1- Table 1- vi)(Requirements of HDPE/PP Leno Woven Sacks - Average breaking strength of fabric (cut strip method), N (kgf) a) Lengthwise b) Widthwise)	-	0	-
4.1- Table 1- vii)(Requirements of HDPE/PP Leno Woven Sacks - Average breaking strength of bottom /side seam (cut strip method), N (kgf))	-	0	-
4.2(Requirements - UV Resistance)	-	0	-
4.3(Requirements - Mass of Bale As per Annex C)	-	0	-
5.1(LABELLING, PACKING AND MARKING - Labelling on Sacks)	-	0	-
5.2(Packing)	-	0	-
5.3(Marking)	-	0	-
6(ATMOSPHERIC CONDITIONS, CONDITIONING AND TESTING)	-	0	-
Clause no. 3.1(Raw Material, as applicable: HDPE Granules (IS7328))	-	0	-

31 Dec, 2026

-
Excl: Heavy elements, Aromatic amines, carcinogenic amines, biphenyl in raw material

11487

BIS, Eastern Regional Laboratory (ERL)

None

IS 14625 (2015)

Plastics Feeding Bottles ( First Revision )

Rs 16930 (Excluding tests for material as per Cl.4.1 an View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.3.8 a) (Migration Test a) Distilled water at 40±2° hrs)	-
Cl.5.3.9.2, Table-3(i) (Specific migration , Barium)	-
Cl.5.3.9.2, Table-3(ii) (Specific migration , Cobalt)	-
Cl.5.3.9.2, Table-3(iii) (Specific migration , Copper)	-
Cl.5.3.9.2, Table-3(iv) (Specific migration , Iron)	-
Cl.5.3.9.2, Table-3(v) (Specific migration , Lithium)	-
Cl.5.3.9.2, Table-3(vi) (Specific migration , Manganese)	-
Cl.5.3.9.2, Table-3(vii) (Specific migration , Zinc)	-
Cl.5.3.9.2, Table-3(viii) (Specific migration , Antimony)	-
Cl 5.1.3 (Wall Thickness)	-
Cl 5.1.4 (Capacity)	-
Cl 5.3.2 (Transparecy)	-
Cl 5.3.3 (Leakage Test)	-
Cl 5.3.4 (Drop Test)	-
Cl 5.3.5 (Ageing Resistance)	-
Cl 5.3.7 (Product Resistance of Printed Containers)	-
4.1 (Material Identification, Bisphenol A,)	-
5.3.1 (Environmental Stress Crack Resistance,)	-
Clauses 5.3.9.2 and 5.3.9.3,Table 3, S.no.(ix) (Phthalic acid, bis(2-ethylhexyl)ester (DEHP)-ISO 18856)	-
5.3.8 b) (Migration Test b) n-Haptane at 38±1° C for 30 min)	-
Clause 5.2.1.7, S.No.(i) (Heavy metal,Antimony)	-
Clause 5.2.1.7, S.No.(ii) (Heavy metal,Arsenic)	-
Clause 5.2.1.7, S.No.(iii) (Heavy metal,Chromium)	-
Clause 5.2.1.7, S.No.(iv) (Heavy metal,Mercury)	-
Clause 5.2.1.7, S.No.(v) (Heavy metal,Cadmium)	-
Clause 5.2.1.7, S.No.(vi) (Heavy metal,Lead)	-
Clause 5.2.1.7, S.No.(vii) (Heavy metal,Barium)	-
Clause 5.2.1.7, S.No.(viii) (Heavy metal,Selenium)	-
4.1 (Material Identification, Bisphenol A,)	-
Sl. No. i), Table 1, Cl.5.2.1.7 (Migration of certain elements - Antimony)	-
Sl. No. i), Table 1, Cl.5.2.1.7 (Migration of certain elements - Arsenic)	-
Sl. No. i), Table 1, Cl.5.2.1.7 (Migration of certain elements - Chromium)	-
Sl. No. i), Table 1, Cl.5.2.1.7 (Migration of certain elements - Mercury)	-
Sl. No. i), Table 1, Cl.5.2.1.7 (Migration of certain elements - Cadmium)	-
Sl. No. i), Table 1, Cl.5.2.1.7 (Migration of certain elements - Lead)	-
Sl. No. i), Table 1, Cl.5.2.1.7 (Migration of certain elements - Barium)	-
Sl. No. i), Table 1, Cl.5.2.1.7 (Migration of certain elements - Selenium)	-
Clause 5.3.1 (Environmental Stress crack resistance)	-
Cl.5.2.1.7, Table-1(i) (Migration of certain elements, Reqiurement as per table 1, Arsenic)	-
Cl.5.2.1.7, Table-1(ii) (Migration of certain elements, Reqiurement as per table 1, Chromium)	-
Cl.5.2.1.7, Table-1(iii) (Migration of certain elements, Reqiurement as per table 1, Mercury)	-
Cl.5.2.1.7, Table-1(iv) (Migration of certain elements, Reqiurement as per table 1, Cadmium)	-
Cl.5.2.1.7, Table-1(v) (Migration of certain elements, Reqiurement as per table 1, Lead)	-
Cl.5.2.1.7, Table-1(vi) (Migration of certain elements, Reqiurement as per table 1, Barium)	-
Cl.5.2.1.7, Table-1(vii) (Migration of certain elements, Reqiurement as per table 1, Selenium)	-
Cl.5.3.8 (Migration test a)Distilled water)	-
Cl.5.3.8 (Migration test a)n-Heptane)	-
Cl 5.3.6 (Compressive Deformation Resistance)	-

-
Excluding Material

11488

Astute Labs Pvt Ltd, Pune

7174321

IS 13252 : Part 1 (2010)

Information technology equipment - Safety: Part 1 general requirements (Second Revision)

60000 View breakup
(“CPU/Disk drives/optical devices/Solid state drives/DIMM/M ain board/GPU/USB devices/Wi-Fi hub/PCI extensioncards/K eyboards /Monitors/VDUs/Modern/Network deveces/Audio/Vi deo, Information and communication technology equipment/Auto matic Data Processing Machine, Plotters, Scanners, Set Top Box, Telephone Answering Machines, Visual Display Units, Videos Monitors of Screen, Wireless Keyboards, Cash Registers, Copying Machines/Duplic ators,Passport Reader, Point of Sale Terminals, Mail Processing Machines/Postage Machines/Franking Machines, Power Banks for Use In Portable Applications, Smart Card Reade, Mobile Phones, Power Adaptors for IT Equipments, Visual Display Units, Video Monitors of Screen, Cctv Cameras/CCTV Recorders, USB Driven Barcode Scanners, Iris Scanners, Optical Fingerprint Scanners, Smart Watches, Automatic Teller Cash Dispensing Machines, USB Type External Hard Disk Drive, USB Type External Solid-State Storage Devices, Standalone Switch Mode Power Supplies (SMPS) With output Voltage 48V (Max), Digital Camera & Similar IT products/Mobile Phones/Personal Computers/ Laptop / Note Book/ tablets/Printers/ Scanner/Copier/Servers”) = 60,000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1.5(Components)	-	1000	-
1.6(Power interface .)	-	1000	-
1.7(Markings and instructions)	-	1000	-
2.1(Protection from electric shock and energy hazards)	-	1000	-
2.2(SELV circuits)	-	1000	-
2.3(TNV circuits)	-	1000	-
2.4(Limited current circuits)	-	1000	-
2.5(Limited power sources .)	-	1000	-
2.6(Provisions for earthing and bonding)	-	1000	-
2.7(Overcurrent and earth fault protection in primary circuits)	-	1000	-
2.8(Safety interlocks)	-	24000	-
2.9(Electrical insulation)	-	1500	-
2.10(Clearances, creepage distances and distances through insulation)	-	1000	-
3.1(General)	-	0	-
3.2(Connection to a mains supply)	-	500	-
3.3(Wiring terminals for connection of external conductors)	-	500	-
3.4(Disconnection from the mains supply)	-	1000	-
3.5(Interconnection of equipment)	-	1000	-
4.1(Stability)	-	1000	-
4.2(Mechanical strength)	-	1000	-
4.3(Design and construction)	-	2000	-
4.4(Protection against hazardous moving parts)	-	1000	-
4.5(Thermal requirements)	-	1000	-
4.6(Openings in enclosures)	-	1000	-
5.1(Touch current and protective conductor curren)	-	1000	-
5.2(Electric strength)	-	1000	-
5.3(Abnormal operating and fault conditions)	-	750	-
6.1(Protection of telecommunication network service persons, and users of other equipment connected to the network, from hazards in the equipment)	-	1000	-
6.2(Protection of equipment users from overvoltages on networks telecommunication)	-	750	-
6.3(Protection of the telecommunication wiring system from overheating)	-	750	-
7.1(General)	-	0	-
7.2(Protection of cable distribution system service persons, and users of other equipment connected to the system, from hazardous voltages in the equipment)	-	750	-
7.3(Protection of equipment users from overvoltages on the cable distribution system)	-	1000	-
1.5(Components)	-	0	-
2.8.2/2.8.5(Interlock switches)	-	500	-
2.8.7(Switches and Relay)	-	500	-
2.10.4.2(Material Group and Comparative Tracking Index)	-	500	-
2.10.5.3(Insulating Compound as Solid Insulation)	-	1000	-
2.10.5.6(Thin sheet materials)	-	1000	-
2.10.5.11(SMPS Transformer and Inductor)	-	1000	-
2.10.12(Enclosed and sealed parts)	-	1000	-
3.1.4(Internal wire)	-	0	-
3.2.4(Appliance inlet /connector)	-	0	-
3.2.4(Appliance inlet /connector)	-	0	-
3.2.5(Non re-wirable plug with PVC sheathed cable)	-	1000	-
Annex K(Thermal Control)	-	0	-
Annex B(Motor tests under abnormal conditions)	-	0	-
Annex C(Transformers)	-	0	-
Annex DD(Requirements for the mounting means of a rack mounted equipment)	-	0	-
Annex EE(Household and home/ office document/ media shredders)	-	0	-
4.7(Resistance to fire)	-	1000	-
7.4(Insulation between primary circuits and cable distribution systems)	-	1000	-

05 Nov, 2026

-
Exclusion: Cl.1.5 (Components), Cl.2.8.7 (Switches and relays), Cl.2.10.8 (Tests on coated printed boards and coated components), Cl.2.10.9 (Thermal cycling), Cl.2.10.10 (Test for Pollution Degree 1 environment and for insulating compound), Cl.2.10.12 (Enclosed and sealed parts), Cl.4.2.8 (Cathode ray tubes), Cl.4.2.9 (High pressure lamps), Cl.4.3.10 (Dust, powders, liquids and gases), Cl.4.3.11 (Containers for liquids or gases), Cl.4.3.12 (Flammable liquids), Cl.4.3.13 (Radiation), Cl.4.6.2 (Bottoms of fire enclosures), Annex A3 Hot flaming oil test, Annex CC Evaluation of integrated circuit (IC) current, Annex Q Voltage Dependent Resistors

11489

Central Power Research Institute (CPRI), Bangalore

6101024

IS 16636 (2017)

Automatic power factor correction (APFC) panels for voltage rating up to and including 1000 V

726660 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.3(Verification of Output)	-	820	This test charge is per measurement. Test charges are dependent on the number of measurements to be carried out on the APFC panel. Hence, full-detail drawings of the construction and rating of the APFC panel are to be submitted for a proforma invoice.
5.4(Dielectric Tests)	-	7880	This test charge is per measurement. Test charges are dependent on the number of measurements to be carried out on the APFC panel. Hence, full-detail drawings of the construction and rating of the APFC panel are to be submitted for a proforma invoice.
5.5(Insulation Resistance Test)	-	1290	This test charge is per measurement. Test charges are dependent on the number of measurements to be carried out on the APFC panel. Hence, full-detail drawings of the construction and rating of the APFC panel are to be submitted for a proforma invoice.
5.6(Power Frequency Withstand Voltage Test)	-	1000	This test charge is per measurement. Test charges are dependent on the number of measurements to be carried out on the APFC panel. Hence, full-detail drawings of the construction and rating of the APFC panel are to be submitted for a proforma invoice.
5.7(Voltage Withstand Test between Phases)	-	1290	This test charge is per measurement. Test charges are dependent on the number of measurements to be carried out on the APFC panel. Hence, full-detail drawings of the construction and rating of the APFC panel are to be submitted for a proforma invoice.
5.8(Lightning Impulse Voltage Withstand Test)	-	4350	This test charge is per measurement. Test charges are dependent on the number of measurements to be carried out on the APFC panel. Hence, full-detail drawings of the construction and rating of the APFC panel are to be submitted for a proforma invoice.
5.9(Temperature Rise Test)	-	335950	This test charge is per measurement. Test charges are dependent on the number of measurements to be carried out on the APFC panel. Hence, full-detail drawings of the construction and rating of the APFC panel are to be submitted for a proforma invoice.
5.10,(Verification of the Effectiveness of Protective Circuit)	-	138870	This test charge is per measurement. Test charges are dependent on the number of measurements to be carried out on the APFC panel. Hence, full-detail drawings of the construction and rating of the APFC panel are to be submitted for a proforma invoice.
5.11(Short- Circuit Withstand Test)	-	118090	This test charge is per measurement. Test charges are dependent on the number of measurements to be carried out on the APFC panel. Hence, full-detail drawings of the construction and rating of the APFC panel are to be submitted for a proforma invoice.
5.12(Verification of Clearances)	-	1700	This test charge is per measurement. Test charges are dependent on the number of measurements to be carried out on the APFC panel. Hence, full-detail drawings of the construction and rating of the APFC panel are to be submitted for a proforma invoice.
5.13(Verification of Mechanical Operation)	-	9030	This test charge is per measurement. Test charges are dependent on the number of measurements to be carried out on the APFC panel. Hence, full-detail drawings of the construction and rating of the APFC panel are to be submitted for a proforma invoice.
5.14(Verification of the Degree of Protection of Enclosure)	-	58580	This test charge is per measurement. Test charges are dependent on the number of measurements to be carried out on the APFC panel. Hence, full-detail drawings of the construction and rating of the APFC panel are to be submitted for a proforma invoice.
5.15(Verification of the Effectiveness of Automatic PF Correction)	-	34390	This test charge is per measurement. Test charges are dependent on the number of measurements to be carried out on the APFC panel. Hence, full-detail drawings of the construction and rating of the APFC panel are to be submitted for a proforma invoice.
5.16(Measurement of Transient over Currents Due To Capacitor Switching)	-	10260	This test charge is per measurement. Test charges are dependent on the number of measurements to be carried out on the APFC panel. Hence, full-detail drawings of the construction and rating of the APFC panel are to be submitted for a proforma invoice.
5.17(Inspection of the Panel Including Inspection of Wiring)	-	1580	This test charge is per measurement. Test charges are dependent on the number of measurements to be carried out on the APFC panel. Hence, full-detail drawings of the construction and rating of the APFC panel are to be submitted for a proforma invoice.
5.18(Test for Checking Functional Operation)	-	1580	This test charge is per measurement. Test charges are dependent on the number of measurements to be carried out on the APFC panel. Hence, full-detail drawings of the construction and rating of the APFC panel are to be submitted for a proforma invoice.
4(MARKING)	-	0	This is a standard guideline not a test.
5.1(Test Requirements)	-	0	This is a standard guideline not a test.

31 Dec, 2026

-
Included w.e.f 16.05.2024

11490

BIS, Central Laboratory (CL)

None

IS 1285 (2002)

Wrought aluminium and aluminium alloys - Extruded round tube and hollow sections for general engineering purposes - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
As per Clause 8 Table ! (Aluminium)	-
As per Clause 8 Table ! (Copper)	-
As per Clause 8 Table ! (Magnesium)	-
As per Clause 8 Table ! (Silicon)	-
As per Clause 8 Table ! (Iron)	-
As per Clause 8 Table ! (Manganese)	-
As per Clause 8 Table ! (Zinc)	-
As per Clause 8 Table ! (Titanium)	-
As per Clause 8 Table ! (Chromium)	-
6 (Cl. 6 CONDITIONS OF SUPPLY)	-
5/5.2 (FREEDOM FROM DEFECTS)	-
7/a) Extruded round tube IS 2673 (DIMENSIONS AND TOLERANCE-Extruded round tube - outside Dia or Inside Dia)	-
7 of IS 1285 /a) Extruded round tube IS 2673 (DIMENSIONS AND TOLERANCE-Extruded round tube - Wall thickness)	-
7 of IS 1285 /a) Extruded round tube IS 2673 (DIMENSIONS AND TOLERANCE-Extruded round tube - Allowable Deviation of Mean Diameter from Specified Diameter (Size Tolerance))	-
7 of IS 1285 /a) Extruded round tube IS 2673 (DIMENSIONS AND TOLERANCE-Extruded round tube - Allowabte Deviation of Diameter at Any Point from Specified Diameter (Ovality Tolcrance))	-
7 of IS 1285 /a) Extruded round tube IS 2673 (DIMENSIONS AND TOLERANCE-Extruded round tube -Straightness)	-
7 of IS 1285 /a) Extruded round tube IS 2673 (DIMENSIONS AND TOLERANCE-Extruded round tube -Length)	-
7 of IS 1285 / b) Extruded hollow sections IS 6477 (DIMENSIONS AND TOLERANCE-Extruded hollow sections -SPECIFIED WIDTH or WIDTH ACROSS FLATS)	-
7 of IS 1285 / b) Extruded hollow sections IS 6477 (DIMENSIONS AND TOLERANCE-Extruded hollow sections -Flatness)	-
7 of IS 1285 / b) Extruded hollow sections IS 6477 (DIMENSIONS AND TOLERANCE-Extruded hollow sections -Twist)	-
9 (Mechanical Comp[osition -IS 1285)	-
12 (Marking)	-
7 of IS 1285 /a) Extruded round tube IS 2673 (DIMENSIONS AND TOLERANCE-Extruded round tube -Length)	-

-
-

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number