BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

14028 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

11491

Envirocare Labs Pvt Ltd, Thane

7120616

IS 2764 (2018)

Potassium sulphate, fertilizer grade - Specification (Second Revision)

2600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.1(Description)	-	100	-
2.2(Particle size (Passing through 0.25mm seive))	-	200	-
2.2(Particle size (Retained on 250micron seive))	-	200	-
2.3 i(Potash content as K2O)	-	1000	-
2.3 ii(Moisture)	-	300	-
2.3 iii(Total chloride as Cl)	-	400	-
2.3 iv(Sodium as NaCl)	-	400	-

25 May, 2027

-
REVISED VERSION OF IS 2764:2018 INCLUDED W.E.F. 14-06-2021.

11492

Envirocare Labs Pvt Ltd, Thane

7120616

IS 2400 (1976)

Specification for besan (First Revision)

2450 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Description)	-	100	-
3.1.1(Contamination- ( Lathyrus sativus))	-	500	-
3.2(Microscopic Appearance)	-	100	-
3.4 ii(Total ash (on dry basis ), percent)	-	300	-
3.4 iii(Acid insoluble ash ( on dry basis ))	-	600	-
3.4 iv(Protein (on dry basis ))	-	550	-
3.4 i(Moisture)	-	300	-

25 May, 2027

-
-

11493

Envirocare Labs Pvt Ltd, Thane

7120616

IS 1070 (1992)

Reagent grade water - Specification (Third Revision)

Grade I, Grade II, Grade III

2100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Description)	-	100	-
4.2 i(Specific conductivity µmhos/cm at 250C)	-	400	-
4.2 ii(pH, at 25°C)	-	150	-
4.2 iii(Total solids or nonvolatile residue at 1050C,)	-	350	-
4.2 iv(Silica ( as SiO2 ))	-	550	-
4.2 v(Colour retention of KMnO4, at 27 0C)	-	550	-

25 May, 2027

-
-

11494

Envirocare Labs Pvt Ltd, Thane

7120616

IS 1010 (1968)

Specification for suji or rava (Semolina) (First Revision)

"a) Large Particle Size (LP) b) Small Particle Size (SP

2900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Description)	-	100	-
3.2(Particle Size)	-	200	-
3.3(Microscopic Appearance)	-	100	-
3.4 i(Moisture)	-	300	-
3.4 ii(Total ash (on dry basis))	-	400	-
3.4 iii(Acid insoluble ash (on dry basis))	-	650	-
3.4 iv(Gluten (on dry basis))	-	750	-
3.4 v(Alcoholic acidity (as H₂SO₄) in 90% alcohol)	-	400	-

25 May, 2027

-
-

11495

Envirocare Labs Pvt Ltd, Thane

7120616

IS 2779 (2018)

Potassium chloride (Muriate Of Potash), fertilizer grade - Specification (Second Revision)

2900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.1(Description)	-	100	-
2.2(Particle size (Passing through 0.25 mm seive))	-	200	-
2.2(Particle size (Retained on 0.25mm seive))	-	200	-
2.3 i(Potash acontent as K2O)	-	1000	-
2.3 ii(Moisture)	-	300	-
2.3 iii(Sodium as NaCl)	-	400	-

25 May, 2027

-
REVISED VERSION OF IS 2779:2018 INCLUDED W.E.F. 14-06-2021.

11496

Envirocare Labs Pvt Ltd, Thane

7120616

IS 2409 (2019)

Calcium ammonium nitrate - Specification (Third Revision)

"A) 26 % nitrogen grade B) 25 % nitrogen grade"

2900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Description)	-	100	-
3.2(Particle size (Passing through 4mm seive))	-	200	-
3.2(Particle size (Retained on 1mm seive))	-	200	-
3.3 i(Total nitrogen as N)	-	550	-
3.3 ii(Ammoniacal nitrogen as N)	-	550	-
3.3 iii(Moisture)	-	300	-
3.3 iv(Calcium nitrate)	-	1000	-

25 May, 2027

-
REVISED VERSION OF IS 2409:2019 INCLUDED W.E.F. 14-06-2021.

11497

Envirocare Labs Pvt Ltd, Thane

7120616

IS 1114 (1964)

Specification for ammonium chloride, fertilizer grade (Revised)

1950 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.1(Description)	-	100	-
2.2 i(Moisture)	-	300	-
2.2 ii(Ammonical nitrogen as N)	-	550	-
2.2 iii(Chlorides other than ammonium chlorides as NaCl (on dry basis))	-	1000	-

25 May, 2027

-
-

11498

Envirocare Labs Pvt Ltd, Thane

7120616

IS 1013 (1972)

Specification for triple superphosphate (First Revision)

3100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.1(Description)	-	100	-
2.2 i(Moisture)	-	300	-
2.2 ii(Free phosphoric acid as P2O5)	-	1000	-
2.2 iii(Water soluble phosphate as P2O5)	-	850	-
2.2 iv(Total phosphate as P2O5)	-	850	-

25 May, 2027

-
-

11499

Envirocare Labs Pvt Ltd, Thane

7120616

IS 826 (2018)

Ammonium sulphate, fertilizer grade - Specification (Third Revision)

---

1900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.1(Description)	-	100	-
2.2 i(Ammonical nitrogen)	-	550	-
2.2 ii(Moisture)	-	300	-
2.2 iii(Free acidity as H2SO4)	-	400	-
2.2 iv(Arsenic as As2O3)	-	550	-

25 May, 2027

-
REVISED VERSION OF IS 826:2018 INCLUDED W.E.F. 14-06-2021.

11500

Envirocare Labs Pvt Ltd, Thane

7120616

IS 294 (2018)

Single superphosphate - Specification (Third Revision)

Grade I & Grade II

2250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Cl 3.1 of IS 294: 2015)	-	100	-
3.2 i(Moisture)	-	300	-
3.2 ii(Free phosphoric acid as P2O5)	-	1000	-
3.2 iii(Water soluble phosphate as P2O5)	-	850	-

25 May, 2027

-
REVISED VERSION OF IS 294:2018 INCLUDED W.E.F. 14-06-2021.

11501

Envirocare Labs Pvt Ltd, Thane

7120616

IS 10170 (1982)

Specification for byproduct gypsum

3200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.1(Fineness (Passing through 2mm seive))	-	200	-
2.1(Fineness (Passing through 0.25mm seive))	-	200	-
2.2 i(Calcium sulphate dihydrate content (on dry basis))	-	1000	-
2.2 ii(Sodium content as Na (on dry basis))	-	750	-
2.2 iii(Fluorine content (on dry basis))	-	750	-
2.2 iv(Free moisture content)	-	350	-

25 May, 2027

-
-

11502

BIS, Central Laboratory (CL)

None

IS 1269 : Part 1 (1997)

Leagal metrology - Material measures of length: Part 1 woven metallic and glass fiber tape measures (Second Revision)

5100 View breakup
Rs. 5100/- excluding Accuracy test, Accuracy classes and maximum permissible errors.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 3 (Nominal Length)	-
Cl. 4.1 (Materials)	-
Cl 4.1 (Materials)	-
Cl 4.2 (Materials)	-
Cl 4.2 (Materials)	-
Cl. 10.6 (Water proofing test)	-
Cl 4.3 (Materials)	-
Cl. 10.5 (Print stability test)	-
Cl 4.3 (Materials)	-
Cl. 5.1.1 (Construction (General))	-
Cl. 10.4 (Sticking test)	-
Cl. 5.1.2 (Construction (General))	-
Cl. 10.3 (Coating stability test)	-
Cl. 5.1.3 (Construction (General))	-
Cl. 10.2 (Permanent set test)	-
Cl. 10.1 (Bend test)	-
Cl. 5.1.4 (Construction (General))	-
Cl. 9.2.1 (Winding Device)	-
Cl. 5.1.5 (Construction (General))	-
Cl. 9.2.1 (Winding Device)	-
Cl. 9.1.5 (Case)	-
Cl. 5.2.1 (Construction)	-
Cl. 9.1.4 (Case)	-
Cl. 5.2.1 (Construction)	-
Cl. 9.1.3 (Case)	-
Cl. 5.2.2 (Construction)	-
Cl. 9.1.3 (Case)	-
Cl. 5.3.1 (Construction)	-
Cl. 9.1.3 (Case)	-
Cl. 5.3.1 (Construction)	-
Cl. 9.1.3 (Case)	-
Cl. 5.3.2 (Construction)	-
Cl. 9.1.2 (Case)	-
Cl. 9.1.1 (Case)	-
Cl. 5.3.3 (Construction)	-
Cl. 8 (Accuracy Classes & Maximum permissible error)	-
Cl. 8 (Accuracy Classes & Maximum permissible error)	-
Cl. 5.3.4 (Construction)	-
Cl. 6.1 (Graduations)	-
Cl. 6.2 (Graduations)	-
Cl. 6.2 (Graduations)	-
Cl. 8 (Accuracy Classes & Maximum permissible error)	-
Cl. 6.2 (Graduations)	-
Cl. 7.6 (Numbering)	-
Cl. 7.6 (Numbering)	-
Graduations (Graduations)	-
Cl. 7.6 (Numbering)	-
Cl. 6.3 (Graduations)	-
Cl. 6.3.1 (Graduations)	-
Cl. 7.5 (Numbering)	-
Cl. 7.4 (Numbering)	-
Cl. 6.3.2 (Graduations)	-
Cl. 7.3q (Numbering)	-
Cl. 7.2 (Numbering)	-
Cl. 6.4 (Graduations)	-
Cl. 7.2 (Numbering)	-
Cl. 6.5 (Graduations)	-
Cl. 7.1.3 (Numbering ( General Requirements))	-
Cl. 6.6 (Graduations)	-
Cl. 7.1.2 (Numbering ( General Requirements))	-
Cl. 6.6 (Graduations)	-
Cl. 6.7 (Graduations)	-
Cl. 6.7 (Graduations)	-
Cl. 7.1.1 (Numbering ( General Requirements))	-
Cl. 6.8 (Graduations)	-
Cl. 6.10 (Graduations)	-
Cl. 6.9 (Graduations)	-
Cl. 6.10 (Graduations)	-
Cl. 6.9 (Graduations)	-
Cl. 6.10 (Graduations)	-
Cl. 6.10 (Graduations)	-
Cl. 6.10 (Graduations)	-

-
Excluding Accuracy Classes & Maximum permissible error (Cl.8), Materials (Cl.4)

11503

ANALYTICAL DEVELOPMENT- R & D, EMAMI LTD., Kolkata

5172106

IS 7123 (2019)

Hair oils - Specification (Third Revision)

oil

3200 View breakup
-

Clause No.	Exclusion	Remark
Clause 4.5(Peroxide Value)	-	-
Clause 4.3(Acid Value)	-	-
4.4, A-3(Microbiological Examinations)	-	Not Applicable
4.6, A-4(Heavy metals)	-	-

03 May, 2026

-
-

11504

Food Testing Laboratory, NIFTEM, Thanjavur

6172804

IS 10500 (2012)

Drinking water - Specification (Second Revision)

94590 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4. SL No.i)of Table I(Colour)	-	385	Nil
4.SL No.ii) of Table I(Odour)	-	385	Nil
4.SL No.iii)of Table I(pH)	-	385	Nil
4.SL No.v)of Table I(Turbidity, NTU, Max)	-	385	Nil
4.SL No.vi)of Table I(Total dissolved solids, mg/l, max)	-	385	Nil
TABLE 6 sl no 1(All water intended for drinking: a) E. coli or thermotolerant coliform bacteri)	-	1100	Nil
TABLE 6 sl no 2(Treated water entering the distribution system: a) E. coli or thermotolerant coliform bacteria)	-	1100	Nil
TABLE 6 sl no 3(b) Total coliform bacteria)	-	1100	Nil
table 2 sl.no 1( Aluminium (as Al), mg/l, Max)	-	825	-
table 2 sl.no 2(Ammonia (as total ammonia-N), mg/l, Max)	-	1100	-
table 2 sl.no 4(Barium (as Ba), mg/l, Max)	-	825	-
table 2 sl.no 5(Boron (as B), mg/l, Max)	-	825	-
table 2 sl.no 7(Calcium (as Ca), mg/l, Max)	-	825	-
table 2 sl.no 9(Copper (as Cu), mg/l, Max)	-	825	-
table 2 sl.no 10( Fluoride (as F) mg/l, Max)	-	1100	-
table 2 sl.no 11(Free residual chlorine, mg/l, Min)	-	550	-
table 2 sl.no 12(Iron (as Fe), mg/l, Max)	-	825	-
table 2 sl.no 13(Magnesium (as Mg), mg/l, Max)	-	825	-
table 2 sl.no 14(Manganese (as Mn), mg/l, Max)	-	825	-
table 2 sl.no 16(Nitrate (as NO3), mg/l, Max)	-	1100	-
table 2 sl.no 17(Phenolic compounds (as C6H5OH), mg/l, Max)	-	1100	-
table 2 sl.no 18(Selenium (as Se), mg/l, Ma)	-	825	-
table 2 sl.no 19(Silver (as Ag), mg/l, Max)	-	825	-
table 2 sl.no 20(Sulphate (as SO4) mg/l, Max)	-	550	-
table 2 sl.no 21(Sulphide (as H2S), mg/l, Max)	-	825	-
table 2 sl.no 22(Total alkalinity as calcium carbonate, mg/l, Max)	-	550	-
table 2 sl.no 23(Total hardness (as CaCO3 mg/l, Max)	-	550	-
table 2 sl.no 24(Zinc (as Zn), mg/l, Max)	-	825	-
TABLE 3 sl no 1(Cadmium (as Cd), mg/l, Max)	-	880	-
TABLE 3 sl no 3(Lead (as Pb), mg/l, Max)	-	880	-
TABLE 3 sl no 4(Mercury (as Hg), mg/l, Max)	-	880	-
TABLE 3 sl no 5( Molybdenum (as Mo), mg/l, Max)	-	825	-
TABLE 3 sl no 6(Nickel (as Ni), mg/l, Max)	-	880	-
TABLE 3 sl no 10(Total arsenic (as As), mg/l, Max)	-	880	-
TABLE 3 sl no 11(Total chromium (as Cr), mg/l, Max)	-	880	-
TABLE 5 sl no 7(Chlorpyriphos)	-	5500	-
TABLE 5 sl no 12( Ethion)	-	5500	-
TABLE 5 sl no 15(Malathion)	-	5500	-
Table 1 clause(iv)(Taste)	-	385	-
TABLE 6 sl no 4(Treated water in the distribution system: a) E. coli or thermotolerant coliform bacteria)	-	1100	-
TABLE 6 sl no 5(b) Total coliform bacteria)	-	1100	-
table 2 sl.no 8(Calcium (as Ca), mg/l, Max)	-	825	-
table 2 sl.no 15(Mineral oil, mg/l, Max)	-	550	-
TABLE 5 sl no 1(Alachlor)	-	2500	-
TABLE 5 sl no 2(Atrazine)	-	2500	-
TABLE 5 sl no 3(Atrazine)	-	2500	-
TABLE 5 sl no 4( Alpha HCH)	-	2500	-
TABLE 5 sl no 5(Beta HCH)	-	2500	-
TABLE 5 sl no 6(Butachlor)	-	2500	-
TABLE 5 sl no 8(Delta HCH)	-	2500	-
TABLE 5 sl no 9(2,4- Dichlorophenoxyacetic acid)	-	2500	-
TABLE 5 sl no 10( DDT (o, p and p, p – Isomers of DDT, DDE and DDD))	-	2500	-
TABLE 5 sl no 11(Endosulfan (alpha, beta, and sulphate))	-	2500	-
TABLE 5 sl no 13(Gamma — HCH (Lindane))	-	2500	-
TABLE 5 sl no 14( Isoproturon)	-	2500	-
TABLE 5 sl no 16(Methyl parathion)	-	2500	-
TABLE 5 sl no 17(Monocrotophos)	-	2500	-
TABLE 5 sl no 18(Phorate)	-	2500	-
TABLE 3 sl no 7(Pesticides, µg/l, Max)	-	11000	-

15 Sep, 2026

-
-

11505

BIS, Central Laboratory (CL)

None

IS 2556 : Part 5 (1994)

Vitreous sanitary appliances (Vitreous China) - Specification: Part 5 specific requirements of laboratory sinks

Rs 675/- +charges as per part I View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 3 - General Requirements ( Ref. Cl.9.5 of IS 2556 (Part 1) : 1994) (Chemical Resistance, Annex - B of IS 2556 (Part 1) : 1994))	-
3 (General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-General-Wavy finiah-IS 2556 (Part 1))	-
3 (General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-General-Warpage -IS 2556 (Part 1))	-
3 (General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-General-Discoloration-IS 2556 (Part 1))	-
3 (General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-·Flushing surface and horizontal face of WC pans,iDI lurfaco and horizontal tace of rima of we pans, Squatting pans bidets and urinals-Spots. blisters and pinholes-IS 2556 (Part 1))	-
3 (General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-Flushing surface and horizontal face of WC pans,iDI lurfaco and horizontal tace of rima of we pans, Squatting pans bidets and urinals-Bubbles and specks-IS 2556 (Part 1))	-
3 (General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-Visible surfaces other than above-Polishing Marks-IS 2556 (Part 1))	-
3 (General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-Visible surfaces other than above-Spots, blisters and pinholes -IS 2556 (Part 1))	-
3 (General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-Visible surfaces other than above-Bubbles and specks -IS 2556 (Part 1))	-
3 (General requirements-Permissible blemishes or defects (WC apns, Bidets, Squatting pans, Urinals, Partition plates, Pedestals, Short Pedestals and Accessories)-Visible surfaces other than above-Polishing mark -IS 2556 (Part 1))	-
3 (General requirements-Permissible blemishes or defects (Wash Basins, Laboratory sinks and drinking fountains)-General-Wavy finiah-IS 2556 (Part 1)))	-
3 (General requirements-Permissible blemishes or defects (Wash Basins, Laboratory sinks and drinking fountains)-General-Warpages-IS 2556 (Part 1)))	-
3 (General requirements-Permissible blemishes or defects (Wash Basins, Laboratory sinks and drinking fountains)-General-Dislocations-IS 2556 (Part 1)))	-
3 (General requirements-Permissible blemishes or defects (Wash Basins, Laboratory sinks and drinking fountains)-Face of intrnal, back and side-Spots, blisters and pinholes-IS 2556 (Part 1)))	-
3 (General requirements-Permissible blemishes or defects (Wash Basins, Laboratory sinks and drinking fountains)-Face of intrnal, back and side-Bubbles and specks-IS 2556 (Part 1)))	-
3 (General requirements-Permissible blemishes or defects (Wash Basins, Laboratory sinks and drinking fountains)-Face of intrnal, back and side-Polishing marks-IS 2556 (Part 1)))	-
3 (General requirements-Permissible blemishes or defects (Flushing cisterns, Auto cisterns and covers)-Visual surface-wavy finish-IS 2556 (Part 1)))	-
3 (General requirements-Thickness IS 2556 (Part 1))	-
3 (General requirements-PERFORMANCE REQUIllEMENTS-WATER ABSORBTION - Individual IS 2556 (Part 1))	-
3 (General requirements-PERFORMANCE REQUIllEMENTS-WATER ABSORBTION - Average (IS 2556 (Part 1))	-
4 (Sizes)	-
5-Table 1 ( DIMENSIONS AND TOLERANCES-L)	-
5-Table 1 ( DIMENSIONS AND TOLERANCES-B)	-
5-Table 1 ( DIMENSIONS AND TOLERANCES-H)	-
5-Table 1 ( DIMENSIONS AND TOLERANCES-a)	-
5-Table 1 ( DIMENSIONS AND TOLERANCES-b)	-
5-Table 1 ( DIMENSIONS AND TOLERANCES-c)	-
6.1 (Constructions-)	-
6.2 (Constructions-)	-
6.2-Table 2 (Constructions-Dimensions of the Waste Outlet Hole-d3)	-
6.2-Table 2 (Constructions-Dimensions of the Waste Outlet Hole-d4)	-
6.2-Table 2 (Constructions-Dimensions of the Waste Outlet Hole-d5)	-
6.2-Table 2 (Constructions-Dimensions of the Waste Outlet Hole-d6)	-
6.2-Table 2 (Constructions-Dimensions of the Waste Outlet Hole-h Min.)	-
6.2-Table 2 (Constructions-Dimensions of the Waste Outlet Hole-h Max.)	-
6.2-Table 2 (Constructions-Dimensions of the Waste Outlet Hole-h1 Min.)	-
6.2-Table 2 (Constructions-Dimensions of the Waste Outlet Hole-h1 Max.)	-
7 (FINISH)	-
6.4 (Constructions-outlet )	-
Cl 6.2.1 (CONSTRUCTION)	-

-
-

11506

BIS, Central Laboratory (CL)

None

IS 12492 (1988)

Specification for thermoplastics hoses (Textile Reinforced) for compressed air

Rs.7200.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 3 (TYPES)	-
Cl 4.1 (REQUIREMENTS)	-
Cl 4.1.1 (REQUIREMENTS)	-
Cl 4.1.2 (REQUIREMENTS)	-
Cl 4.1.3 (REQUIREMENTS)	-
Cl 4.1.3 (REQUIREMENTS)	-
Cl 4.2.1 Table-1 (DIMENSIONS AND TOLERANCES)	-
Cl 4.2.2 Table-1 (DIMENSIONS AND TOLERANCES)	-
Cl 4.2.2 Table-1 (DIMENSIONS AND TOLERANCES)	-
Cl 4.2.3 (DIMENSIONS AND TOLERANCES)	-
Cl 4.3.1 (Physical Requirements)	-
Cl 4.3.2 (Physical Requirements)	-
Cl 4.4.1 (Performance Requirements)	-
Cl 4.4.2 Table -2 (Performance Requirements)	-
Cl 4.4.3 Table -3 (Performance Requirements)	-

-
Excluding Resistance to Liquids, Performance Test- Cold bend radius

11507

BIS, Bengaluru Branch Laboratory (BNBL)

None

IS 9585 (2021)

Lactometers - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. No. 11.2 (Check test)	-

-
Excluding Chemical-test facility available for cl.11

11508

CIPET: CENTRE FOR SKILLING AND TECHNICAL SUPPORT (CSTS) - (CIPET), AURANGABAD

7123534

IS 15532 (2004)

Plastics crates for fruits and vegetables - Specification

11250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2(Material)	-	2000	-
3.3(Shape, Dimensions and Design)	-	500	-
3.4(Mass)	-	250	-
3.5(Appearance and Surface Finish)	-	300	-
3.6(Dimensional Stability)	-	700	-
3.7(Confluence Line Strength)	-	1100	-
3.8.1(Compressive Strength (Resistance to Applied Load))	-	1100	-
3.8.2(Resistance to Drop)	-	1100	-
3.9(Resistance to Environmental Stress Cracking)	-	1200	-
3.10.1(Suspension Test)	-	2200	-
3.10.2(Free-Fall Test)	-	0	INCLUDED IN SUSPENSION TEST

31 Dec, 2026

-
-

11509

National Council for Cement and Building Materials (testing laboratories), Faridabad

9102335

IS 8043 (1991)

Specification for hydrophobic Portland cement

Hydrophobic Portland Cement

32110 View breakup
Rs.32110/- (excluding transverse strength), Rs.43880/- (including transverse strength)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1 (ref. 6 - Table - 1 i of IS 269:2015)(Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-	10490	-
5.1 (ref. 6 - Table - 1 ii of IS 269:2015)(Ratio of percentage of alumina to that of iron oxide - Cl 4 of IS 4032:1985)	-	4450	-
5.1 (ref. 6 - Table - 1 iii of IS 269:2015)(Insoluble residue - Cl 4.10 of IS 4032:1985)	-	1940	-
5.1 (ref. 6 - Table - 1 iv of IS 269:2015)(Magnesia - Cl 4.8 of IS 4032:1985)	-	2510	-
5.1 (ref. 6 - Table - 1 v of IS 269:2015)(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-	1940	-
5.1 (ref. 6 - Table - 1 vi of IS 269:2015)(Loss on ignition - Cl 4.2 of IS 4032:1985)	-	970	-
5.1 (ref. 6 - Table - 1 vii of IS 269:2015)(Chloride content - Cl 4.13 of IS 4032:1985)	-	1940	-
5.1 (ref. 6 - Table - 1 viii of IS 269:2015)( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	1610	-
6.1(Fineness 4031 Part 2)	-	1610	-
6.2(Expansion by Le Chatelier- IS 269 & 4031 Part 3)	-	1610	-
6.2(Expansion after aeration - IS 269 & 4031 Part 3)	-	1610	-
6.2(Expansion by Autoclave- IS 269 & 4031 Part 3)	-	2900	-
6.2(Expansion after aeration- IS 269 & 4031 Part 3)	-	2900	-
6.2(Setting Time Initial- IS 269 & 4031 Part 5)	-	725	-
6.2(Setting Time Final- IS 269 & 4031 Part 5)	-	725	-
6.3 a)(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	1650	-
6.3 b)(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	1870	-
6.3 c)(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	2200	-
6.6(Hydrophobicity- Annex B)	-	970	-

15 May, 2027

-
-

11510

Conformity Testing Labs Pvt. Ltd. Unit 2 (A33)

8139626

IS 16221 : Part 2 (2015)

Safety of power converters for use in photovoltaic power systems: Part 2 particular requirements for inverters

350000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Test Requireements)	-	135000	10& DISCOUNT FOR BIS
5(Marking and documentation)	-	10000	10& DISCOUNT FOR BIS
6(Environmental requirements and conditions)	-	10000	10& DISCOUNT FOR BIS
7(Protection against electric shock and energy hazards)	-	30000	10& DISCOUNT FOR BIS
8(Protection against Mechanical Hazards)	-	10000	10& DISCOUNT FOR BIS
9(Protection against Fire Hazards)	-	10000	10& DISCOUNT FOR BIS
10(Protection against Sonic Pressure Hazards)	-	20000	10& DISCOUNT FOR BIS
11(Protection against Liquid Hazards)	-	10000	10& DISCOUNT FOR BIS
12(Protection against Chemical Hazards)	-	10000	10& DISCOUNT FOR BIS
13(Physical Requirements)	-	20000	10& DISCOUNT FOR BIS
6.4(UV exposure)	-	10000	10& DISCOUNT FOR BIS
Clause No. 4.3(Thermal testing)	-	30000	10& DISCOUNT FOR BIS
Clause No. 4.4(Testing in single fault condition)	-	30000	10& DISCOUNT FOR BIS
4.5(Humidity preconditioning)	-	25000	10& DISCOUNT FOR BIS
4.6(Backfeed voltage protection)	-	20000	10& DISCOUNT FOR BIS
4.7(Electrical rating tests)	-	10000	10& DISCOUNT FOR BIS
4.8(Additional tests for grid interactive inverters)	-	20000	10& DISCOUNT FOR BIS

05 Apr, 2027

-
Included w.e.f. 1-10-2021. Exclusions: UV resistance (Cl.13.6.4), Component (Cl.14)

11511

Conformity Testing Labs Pvt. Ltd. Unit 2 (A33)

8139626

IS 2993 (1998)

A.C. motor capacitors (Second Revision)

420000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.6(Visual Examination)	-	5000	10% Discount Offred to BIS
2.1(Check of dimensions)	-	5000	10% Discount Offred to BIS
2.9(Capacitance measurement)	-	10000	10% Discount Offred to BIS
2.11.1(Robustness of terminations)	-	5000	10% Discount Offred to BIS
2.11.1.1(Tensile)	-	5000	10% Discount Offred to BIS
2.11.1.2(Bending (half cf the terminations))	-	5000	10% Discount Offred to BIS
2.11 .1.3(Torsion (other half of the terminations))	-	5000	10% Discount Offred to BIS
2.11.1.5(Visual Examination)	-	5000	10% Discount Offred to BIS
2.11.2(Soldering)	-	5000	10% Discount Offred to BIS
2.11.3(Vibration)	-	10000	10% Discount Offred to BIS
2.11.4(fixing bolt or stud (if fitted))	-	5000	10% Discount Offred to BIS
2.12(Sealing Test)	-	15000	10% Discount Offred to BIS
2.13(Endurance test)	-	20000	10% Discount Offred to BIS
2.13.1(Endurance test :Testing in air with forced circulation)	-	20000	-
2.13.3(Endurance test : Conditions of compliance)	-	5000	10% Discount Offred to BIS
2.14(Damping heat test)	-	57000	10% Discount Offred to BIS
2.7(Voltage test between terminals)	-	10000	10% Discount Offred to BIS
2.8(Voltage test between terminals and case)	-	10000	10% Discount Offred to BIS
2.15(Self-healing test (if applicable))	-	72000	10% Discount Offred to BIS
2.16.3(Destruction test : Test procedure)	-	30000	10% Discount Offred to BIS
2.16.3.1(Destruction test : Test procedure - Preparation and pre-conditioning )	-	20000	10% Discount Offred to BIS
2.16.3.2(Destruction test : Test procedure : DC conditioning)	-	20000	10% Discount Offred to BIS
2.16.3.3(Destruction test : Test procedure : AC destruction test)	-	30000	10% Discount Offred to BIS
2.5(Tangent of loss angle)	-	5000	10% Discount Offred to BIS
2.16.4(Destruction tes: Evaluation of the failure )	-	50000	10% Discount Offred to BIS
2.10(Check of dimensions)	-	5000	10% Discount Offred to BIS
4.1(Creepage distances and clearances)	-	5000	10% Discount Offred to BIS
4.2(Terminals and connecting cables)	-	2000	10% Discount Offred to BIS
4.3(Earth connections)	-	2000	10% Discount Offred to BIS
4.4(Discharge devices)	-	5000	10% Discount Offred to BIS

05 Apr, 2027

-
-

11512

Envirocare Labs Pvt Ltd, Thane

7120616

IS 14542 (1998)

Partly skimmed milk powder specification

Type I, Type II

3200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 6.6.1(Bacterial Count (IS 5402))	-	400		-
Cl 6.6.2(Coliform Count ((IS 5402))	-	400		-

25 May, 2027

-
-

11513

Envirocare Labs Pvt Ltd, Thane

7120616

IS 1009 (1979)

Specification for maida for General Purposes (Second Revision)

III

3450 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 3.1(Description)	-	100	-
Clause 3.2(Microscopic Apperance)	-	100	-
Clause 3.3 Table 1(Moisture)	-	300	-
Clause 3.3 Table 1(Total Ash)	-	400	-
Clause 3.3 Table 1(Acid Insoluble ash)	-	650	-
Clause 3.3 Table 1(Gluten)	-	750	-
Clause 3.3 Table 1(Alcoholic acidity)	-	400	-
Clause 3.3 Table 2(Granularity)	-	200	-
Clause 3.3 Table 3(Uric acid)	-	550	-

25 May, 2027

-
-

11514

Conformity Testing Labs Pvt. Ltd. Unit 2 (A33)

8139626

IS 16221 : Part 1 (2016)

Safety of Power Converters for use in Photovoltaic Power Systems Part 1 General Requirements

750000 View breakup
UPS/Invertors upto 10 KVA- Rs. 5,50,000/- UPS/Invertors above 10 KVA and < 20 KVA- Rs. 7,50,000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
15(Software and firmware performing safety functions)	-	2000	10% discount for BIS
13(Physical requirements)	-	30000	10% discount for BIS
12(Chemical hazards)	-	15000	10% discount for BIS
11(Protection against liquid hazards)	-	15000	10% discount for BIS
10(Protection against Sonic Pressure hazards)	-	30000	10% discount for BIS
9(Protection Against Fire Hazards)	-	20000	10% discount for BIS
8(Protection Against mechanical Hazards)	-	20000	10% discount for BIS
7(Protection against electric shock and energy hazards)	-	40000	10% discount for BIS
6(Environmental Requirements and conditions)	-	20000	10% discount for BIS
5(Marking and documentation)	-	15000	10% discount for BIS
4(General testing requirements)	-	200000	10% discount for BIS
6.4(UV exposure)	-	15000	10% discount for BIS
9.1.4.3(Hot flaming oil test)	-	10000	10% discount for BIS
4.2(Thermal testing)	-	30000	10% discount for BIS
4.4(Testing in single fault condition)	-	60000	10% discount for BIS
4.5(Humidity preconditioning)	-	20000	10% discount for BIS
4.6(Backfeed voltage protection)	-	40000	10% discount for BIS
4.7(Electrical rating tests)	-	60000	10% discount for BIS

05 Apr, 2027

-
Included w.e.f. 1-10-2021. Exclusions: UV resistance (Cl.13.6.4), Component (Cl.14)

11515

BIS, Southern Regional Laboratory (SRL)

None

IS 2556 : Part 16 (2002)

Vitreous sanitary appliances (Vitreous China) - Specification: Part 16 specific requirements of wash down wall mounted water closets

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
"3 IS 2556(P1)" (GENERAL REQUIREMENTS)	-
"5 Table 1 & 2 " (DIMENSIONS AND TOLERANCES)	-
7 (FINISH)	-
6.1 (CONSTRUCTION)	-
8.1 ()	-
8.2 (Smudge Test)	-
8.3 (Holding Capacity Test)	-
8.4 (Single Ball Test)	-
9 (LOAD TEST)	-
4 (PATTERNS)	-
Clause 3 and Clause 9.5 of IS 2556 (Part 1) (Chemical resistance)	-

-
2 Nos. Advised wooden packing to avoid damage during transit.

11516

Ace Test Labs & Metrology Pvt. Ltd., Sonipat

9162826

IS 17570 : Part 1 (2021)

Air Filters for general ventilation Part 1 Technical specifications requirements and classification system based upon particulate matter efficiency ePM Adoption of ISO 16890-1:2016

130000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
CLAUSE 5.2(Filter Material)	-	35000	-
CLAUSE 5.4(Resistance to air flow)	-	60000	-
CLAUSE 5.6(Arrestance)	-	60000	-
CLAUSE 7(Efficiency test)	-	60000	-

14 Nov, 2027

-
-

11517

BIS, Central Laboratory (CL)

None

IS 9585 (2021)

Lactometers - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 3 (SIZE)	-
Cl 4.1 (FORM)	-
Cl 4.2 (FORM)	-
Cl 4.3 (FORM)	-
Cl 5.1 (MATERIAL OF CONSTRUCTION)	-
Cl 5.2 (MATERIAL OF CONSTRUCTION)	-
Cl 5.3 (MATERIAL OF CONSTRUCTION)	-
Cl 6.1 (WORKMANSHIP)	-
Cl 6.2 (WORKMANSHIP)	-
Cl 6.3 (WORKMANSHIP)	-
Cl 6.4 (WORKMANSHIP)	-
Cl 6.5 (WORKMANSHIP)	-
Cl 6.6 (WORKMANSHIP)	-
Cl 7 (Table-1 and Fig. 1) (DIMENSIONS)	-
Cl 7 (Table-1 and Fig. 1) (DIMENSIONS)	-
Cl 7 (Table-1 and Fig. 1) (DIMENSIONS)	-
Cl 7 (Table-1 and Fig. 1) (DIMENSIONS)	-
Cl 7 (Table-1 and Fig. 1) (DIMENSIONS)	-
Cl 7 (Table-1 and Fig. 1) (DIMENSIONS)	-
Cl 7 (Table-1 and Fig. 1) (DIMENSIONS)	-
Cl 7 (Table-1 and Fig. 1) (DIMENSIONS)	-
Cl 7 (Table-1 and Fig. 1) (DIMENSIONS)	-
Cl 7 (Table-1 and Fig. 1) (DIMENSIONS)	-
Cl 7 (Table-1 and Fig. 1) (DIMENSIONS)	-
Cl 7 (Table-1 and Fig. 1) (DIMENSIONS)	-
Cl 8.1 (SCALE)	-
Cl 8.3 (SCALE)	-
Cl 8.3 (SCALE)	-
Cl 8.3 (SCALE)	-
Cl 8.4 (SCALE)	-
Cl 8.4 (SCALE)	-
Cl 8.5 (SCALE)	-
Cl 8.6 (SCALE)	-
Cl 8.7 (SCALE)	-
Cl 9 (REFERENCE MARK)	-
Cl 9 (REFERENCE MARK)	-
Cl 10.1 (INSCRIPTIONS)	-
Cl 10.1.1 (INSCRIPTIONS)	-
Cl 12.1 (LACTOMETER JARS)	-
Cl 12.1 (LACTOMETER JARS)	-
Cl 12.1 (LACTOMETER JARS)	-
Cl 12.2 (LACTOMETER JARS)	-
Cl 13 (THERMOMETER)	-
Cl 13 (THERMOMETER)	-
Cl 13 (THERMOMETER)	-
Cl 13 (THERMOMETER)	-
Cl 13 (THERMOMETER)	-
Cl 13 (THERMOMETER)	-

-
-

11518

BIS, Central Laboratory (CL)

None

IS 15834 (2020)

Stainless Steel Sliding Door Bolts ( Aldrops ) for Use With Padlocks - Specification ( First Revision )

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 5 (DIMENSIONS AND TOLERANCES)	-
Cl 5 (DIMENSIONS AND TOLERANCES)	-
Cl 5 (DIMENSIONS AND TOLERANCES)	-
Cl 5 (DIMENSIONS AND TOLERANCES)	-
Cl 5 (DIMENSIONS AND TOLERANCES)	-
6 (MANUFACTURE)	-
7 (FINISH)	-
Cl.4 (Carbon)	-
Cl.4 (Sulphur)	-
Cl.4 (Phosphorus)	-
Cl.4 (Manganese)	-
Cl.4 (Silicon)	-
Cl.4 (Nickel)	-
Cl.4 (Chromium)	-
Cl.4 (Copper)	-
Cl.4 (Molybdenum)	-
Cl.4 (Nitrogen)	-
Cl.4 (Titanium)	-
Cl.4 (Niobium)	-

-
Material Grade/ designation as per relevant IS may please be declared. Sample dia > 3mm or thickness > 0.8 mm can only be tested

11519

BIS, Central Laboratory (CL)

None

IS 5342 (1996)

Ascorbic acid, food grade - Specification (First Revision)

6716.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.4 table 1 (Sulphated ash)	-
4.4 table 1 (Loss on drying over sulphuric acid for 24 hours)	-
4.3 (pH)	-
4.4 table 1 (Arsenic)	-
4.4 table 1 (Heavy metals)	-
3 (Description)	-
4.4 table 1 (Purity as C6H8O6)	-
4.1.1 (Identification test)	-

-
500 gm x 3 Excluding 1- Purity 2-Loss on drying;

11520

BIS, Central Laboratory (CL)

None

IS 1084 (2005)

Textiles – Manila ropes – Specification (fifth revision)

Rs. 7218/- excluding Lubrication. View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1 Table 1 to 3 (Manila Fibre )	-
6.2 Table 1 to 3 (Yarn )	-
6.3 (Strand )	-
6.4 (Ropes The ropes shall be well-laid and free from defects and each coil shall be continuous throughout its length and shall not contain loose ends, splices or joints in the strands or in the rope. The number of strands in the rope and the lay of rope, unless otherwise specified, shall be as in next colum:)	-
8.1 IS 7071 (Part 2) (Mass of the Coil The net mass of the coil shall be determined in accordance with IS 7071 (Part 2). The difference between the observed mass and the calculated value of mass obtained by multiplying nominal linear density of the rope with the length of rope in the coil shall be within limits specified below: Reference No. of Rope)	-
8.2 IS 7071 (Parts 1 to 3) (Pitch The pitch of rope, when determined in accordance with IS 7071 (Parts 1 to 3) shall conform to the following requirements: Type of Rope: Pitch :)	-
8.3 IS 7071 (Parts 1 to 3) (Length of Coil The length of each coil when tested as per IS 7071 (Parts 1 to 3) shall not be less than 220 m or as declared. However, if so agreed between the buyer and the seller, the length of coil may be tested under zero tension and ± 5 percent tolerance shall be applicable for the rope with diameters less than or equal to 14 and ± 3 percent with a diameter greater than 14 on the specified/declared length.)	-
8.4 (Diameter The diameter of the rope shall not be less than that specified in Tables 1 to 3 and shall not exceed by more than the following tolerances: Diameter: mm)	-
8.5 Table: 1 / 2 / 3 (No. of yarns per strand)	-
8.5 Table: 1 / 2 / 3 (Linear density)	-
8.5 Table: 1 / 2 / 3 (Breaking strength Grade :)	-
9 (FINISH)	-
6.6 IS 3522 (Part 1) (Rot-Proofing Treatment If so ordered, ropes shall be rot-proofed by the application of zinc or copper based rot-proofing agent in appropriate quantity as agreed to protect the rope from fungus and microbial attack. The rot-proofing agent may be applied at the dressing stage for uniform penetration in the rope. Ropes which have been so treated shall otherwise comply, in all respects with the requirements of this standard. When Zn or Copper are extracted in accordance with IS 3522 (Part 1), it shall be minimum 0.5 percent and 0.2 percent respectively.)	-

-
-

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number