BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

11999 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

11551

BIS, Western Regional Laboratory (WRL)

None

IS 3589 (2001)

Steel pipes for water and sewage (168.3 To 2540 Mm Outside Diameter) - Specification (Third Revision)

- View breakup
Rs. 11800/- (for SAW Pipe ) Rs. 10380/- for (ERW Fe410 , Fe450 &Fe330)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
9.3 (Guided bend test(For SAW Pipes))	-
11.1, Table 5. (Outside Diameter (OD))	-
11.1, Table 5. (Thickness)	-
11.1, Table 5. (Mass)	-
12.3.3 (Ovality)	-
12.5 (Strightness)	-
9.2.1 (Flattening test for ERW pipes )	-
9.1 (Tensile test-Yield Strength)	-
9.1 (Tensile test-Strength)	-
9.1 (Tensile test- Elongation)	-
8.1 Table 2 Table 3 (Carbon Content IS 228)	-
8.1 Table 2 Table 3 (Manganese Content IS 228)	-
8.1 Table 2 Table 3 (Phosphorus Content IS 228)	-
8.1 Table 2 Table 3 (Sulphur Content IS 228)	-

-
Test facilities are not available for the following: 1. Al, Micro Alloying element (Nb, V, Ti) 2. Hydrostatic Pressure test 3. Size above 914 mm nominal diameter

11552

BIS, Northern Regional Laboratory (NRL)

None

IS 7092 : Part 2 (1987)

Specification for aluminium alloy tube for irrigation purposes: Part 2 extruded tube (Second Revision)

Rs 11230/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.6.2 (Ultimate Tensile Strength- IS 2657)	-
Cl. 6.4 (Hydrostatic Pressure Test-Cl. 6.4)	-
Cl.7.1, Table 2 (Outside Diameter-)	-
Cl.7.1, Table 2 (Wall Thickness)	-
Cl. 7.2 (Length)	-
Cl.4 (Workmanship & Finish)	-

-
Excluding proof stress and Facility for chemical testing is not available

11553

BIS, Western Regional Laboratory (WRL)

None

IS 3575 (1993)

Bitumen drums - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Dimensions Closure (Figure 2))	-
5.1 (Body and ends)	-
5.2 (Closures)	-
8 (Air Pressure Test)	-
4.1 (Dimensions Drums (Figure 1))	-
4.1 (Dimensions Drums (Figure 1))	-
4.1 (Dimensions Drums (Figure 1))	-
4.1 (Dimensions Drums (Figure 1))	-
4.1 (Dimensions Drums (Figure 1))	-
4.1 (Dimensions Closure (Figure 2))	-

-
-

11554

BIS, Western Regional Laboratory (WRL)

None

IS 3390 (1988)

Specification for sphygmomanometers, mercurial (Second Revision)

Rs 7800.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1.2 (Fastening)	-
4.1 (Metal Parts)	-
4.2 (Rubber Parts -Inflation Bulb)	-
4.2 (Rubber Parts:- Rubber Tubing BEFORE AGEING)	-
4.2 (Rubber Parts:- Rubber Tubing BEFORE AGEING)	-
4.2 (Rubber Parts:- Rubber Tubing AFTER AGEING)	-
4.2 (Rubber Parts:- Rubber Tubing AFTER AGEING)	-
4.8.2.1 (Cuff Dimension & fig 1)	-
4.8.2.1 (Cuff Dimension & fig 1)	-
4.8.2.1 (Cuff Dimension & fig 1)	-
4.8.3.1 & 4.8.3.2 (Inflating Bag)	-
4.8.3.1 & 4.8.3.2 (Inflating Bag)	-
4.8.4 (Tubing)	-
4.8.4 (Tubing)	-
4.9.1 (Pressure Measuring Device)	-
4.9.1 (Pressure Measuring Device)	-
4.9.3 (Reservoir and Connecting Tube)	-
4.9.4 (Extension Tube)	-

-
Separate prepared piece of raw material (16 nos) required for tensile and % elongation to be conducted before and after ageing.

11555

BIS, Western Regional Laboratory (WRL)

None

IS 3319 (1995)

Blades, surgical, detachable (Bard Parker Type) and handles - Specification (Fourth Revision)

Rs. 1650 View breakup
For physical tests(Excluding Sterility Test) Rs 2860/- for chemical tests Carbon Steel Blade Rs. 3360/- for chemical tests Stainless steel blade & Rs. 3360/- for chemical tests for Handle

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5,5.1 & 5.2; Table 1 (Shape and dimensions)	-
9.1 ( Visual Examination)	-
7.1 (Hardness test)	-
Clause -4, 4.1 (SILICON)	-
Clause -4, 4.1 (MANGANESE)	-
Clause -4, 4.1 (PHOSPHURS)	-
Clause -4, 4.1 (SULPHUR)	-
Clause -4, 4.1 ( CARBON)	-

-
Test facilities are not available for the following: 1. Ni, Cr, Mo, N, Al 2. hardness Test 3.Perfomance Test 4. Visual Examination

11556

BIS, Northern Regional Laboratory (NRL)

None

IS 6218 (2008)

Bicycle - Mudguards - Specification (First Revision)

- View breakup
Rs. 5400/- and material testing charges as per relevant referred ISs

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause-3 (Carbon)	-
Clause-3 (Sulphur)	-
Clause-3 (Phosphorus)	-
Clause-3 (Silicon)	-
Clause-3 (Nitrogen)	-
Cl 5.3(Mech) (The wraping of the mudguard shall lie within the limits )	-
Cl 5.1(Mech) (The paint shall not soften,peel off or show any change in colour after the test.)	-
Cl 4.3(Mech) (The painted part shall be free from wrinkles, blisters,unevenness,scratch marks and other injurious defects.)	-
Cl 4.2(Mech) (The mudguard shall be free from manufacturing defects and shall be chemically phosphated and and stove enamelled , spray painted or otherwise finished to give a glossy finish .)	-
Cl 4.1(Mech) (Thickness of steel strip)	-
Cl 4.1(Mech) (Depth of mudguard)	-
Cl 4.1(Mech) (Width of mudguard )	-
Cl 4(Mech) (Manufacture ,Workmanship ,& Finish )	-

-
Test facility for all test available but Separate sample of steel strip may be provided for thickness.

11557

BIS, Eastern Regional Laboratory (ERL)

None

IS 277 (2018)

Galvanized steel strips and sheets (Plain And Corrugated) - Specification (Seventh Revision)

For all grades except tests mentioned in remarks

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 8.1 (UTM)	-
Cl 14 (Length, Width & Thickness)	-
Cl 13 (Weight)	-
Cl 12 (Workmanship)	-
5.1 (carbon)	-
5.1 (sulphur)	-
5.1 (phosphorus)	-
5.1 (manganese)	-
5.1 (silicon )	-
5.1 (nitrogen)	-
5.1 (aluminium)	-
cl 5.1, T-1, Note-5, For Microalloying elements (Ti)	-
5.1 (copper)	-
Cl. 9 (Surface roughness)	-

-
Chem- Facility not available for microalloying elements & Al. To specify Grade/Designation for base metal.

11558

BIS, Central Laboratory (CL)

None

IS 2569 (1978)

Specification for malathion water dispersible powder concentrates

- View breakup
Rs.6500/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2.1 (Description)	-
2.2. Table1.i (Malathion Content)	-
2.2. Table1.ii (Sieving requirement)	-
2.2. Table1.iii (Suspensibility)	-
2.2. Table1.iv (Acidity)	-

-
-

11559

BIS, Central Laboratory (CL)

None

IS 2681 (1993)

Non - Ferrous metal sliding door bolts (Aldrops) for use with padlocks - Specification (Third Revision)

- View breakup
Rs.1500/- and Material testing charges as per relevant referred Iss

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
8.2 (FINISH-anodic casting -Min Local thickness)	-
Cl. 8.2 (Ref. Cl. 11.1 of IS 1868:1996) ( appearance and Colour - shall be free from visible defects on the significant surface(s) when viewed from an agreed distance)	-
Cl. 8.2 (Ref. Cl.9 of IS 1868:1996) (Aluminium shall be anodized to a bright, natural, sat or satin finish or dyed. )	-
3 (TYPES)	-
4 (SIZES)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-A)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-B)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-C)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-D)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-E)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-F)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-G)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-H)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-J)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-K)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-L)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-M)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-N)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-Q)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-S)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-T)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-W)	-
6.1-Total 2 (DIMENSIONS AND TOLERANCES-No. of Screw on Staple or Clip to accommodate Wood Screw N0 8)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-A)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-B)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-C)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-D)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-E)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-F)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-G)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-H)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-J)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-K)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-L)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-M)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-Pin dia)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-R)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-T)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-U)	-
6.1-Table 3 (DIMENSIONS AND TOLERANCES-No. of Screw on Staple or Clip to accommodate Wood Screw N0 8)	-
7.1 (MANUFACTURE-General)	-
7.2 (MANUFACTURE-Brass Sliding Door Bolts or Aluminium Alloy Sliding Door Bolts)	-
8.1 (FINISH)	-
8.2 (FINISH)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm; Excluding Complete for material as per table 1; FINISH-anodic casting -Min Local thickness (Cl 8.2)

11560

BIS, Western Regional Laboratory (WRL)

None

IS 3196 : Part 2 (2006)

Welded low carbon steel cylinders exceeding 5 litre water capacity for low pressure liquefiable gases: Part 2 cylinders for liquefiable non - Toxic gases other than lpg - Specification (First Revision)

- View breakup
Rs. 13300/- for 3 Pc. Cylinder Rs. 9600/- for 2 Pc. Cylinder. (Excluding Radiographic and Fatigue Test ) Material testing charges as per relevant referred ISs to be levied additionally

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 (Material)	-
16 (Pneumatic Leakage Test)	-
14 (Water Capacity)	-
18 (a)Parent metal Longitudinal specimen)	-
18 (a)Parent metal Circumferential specimen)	-
18 (c)Weld Joint test specimen)	-
18.1.3 (Root Bend test,)	-
18.1.3 (Face Bend Test,)	-
18.1.5 (Minimum Thickness test)	-
22.2 (Outside surface)	-
10 (Foot Ring)	-

-
Test facilities are not available for the following: 1. Cycle Test 2. Impact and Drop Test 3. Radiographical Examination 4 HST test

11561

BIS, Northern Regional Laboratory (NRL)

None

IS 455 (2015)

Portland slag cement - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7 Table 1 iv c (Compretsive Strenqth 672 ± 4 hr IS 4031(Part 6))	-
7 Table 1 iv b (Compretsive Strenqth 168 ± 2 hr IS 4031(Part 6))	-
7 Table 1 iv a (Compretsive Strenqth .72 ± 1 hr IS 4031(Part 6))	-
7 Table 1 iii b (Setting Time ( by Vicat Apparatus ), Final IS 4031(Part 5))	-
7 Table 1 iii a (Setting Time ( by Vicat Apparatus ),Initial IS 4031(Part 5))	-
7 Table 1 ii b (Soundness, Autoclave expansion IS 4031(Part 3) )	-
7 Table 1 ii a (Soundness, Le-Chate1ier expansion IS 4031(Part 3) )	-
7 Table 1 i (Fineness IS 4031(Part 2))	-
6 - Table - 1 vii ( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-
6 - Table - 1 vi (Chloride content - Cl 4.13 of IS 4032:1985)	-
6 - Table - 1 v (Loss on ignition - Cl 6.2 of IS 4032:1985)	-
6 - Table - 1 iii (Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 6.11 of IS 4032:1985)	-
6 - Table - 1 ii (Magnesia - Cl 6.8 of IS 4032:1985)	-
6 - Table - 1 i (Insoluble residue - Cl 6.9 of IS 4032:1985)	-

-
Except Transverse Strength Test, sulphide Sulphur

11562

BIS, Central Laboratory (CL)

None

IS 5175 (2022)

Fibre ropes - Polypropylene split film monofilament and multifilament PP 2 and polypropylene high tenacity multifilament PP 3 3- 4- 8- and 12- strand ropes (fourth revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 6, (Table 1,2,3) (Linear Density)	-
Clause 6, (Table 1,2,3) (Minimum Breaking Force)	-
5.2 (Pitch or length of lay)	-
5.1 (type A: 3-strand hawser-laid rope)	-
5.1 (type B: 4-strand shroud-laid rope)	-
5.1 (type L: 8-strand braided rope)	-

-
-

11563

BIS, Northern Regional Laboratory (NRL)

None

IS 6003 (2010)

Indented Wire For--Prestressed Concrete ”

Rs.4110/- excl. relaxation test View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 5.1 (Diameter)	-
Cl 6.1.2 (Weight)	-
Cl 7.1 (Tensile Test On UTM)	-
Cl 7.3 (Reverse Bend Test)	-
4.1.1 (Phosphorus %)	-
4.1.1 (Sulphur %)	-
4.1.1 (Phosphorus %)	-
4.1.1 (Sulphur %)	-
4.1.1 (Phosphorus %)	-
4.1.1 (Sulphur %)	-

-
Test Facility Complete for Chemical Except Stress relaxation test , Proof stress

11564

BIS, Northern Regional Laboratory (NRL)

None

IS 1029 (1970)

Specification for hot-rolled steel strip (Baling) (First Revision)

Rs.750/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.2 (Tensile Test-1608:Part 1)	-
5.2 (Tensile Strength, Mpa)	-
5.2 (Elongation, %)	-
5.3 (Bend Test-1599)	-
8.2 (Width)	-
8.2 (Thickness)	-
7.1 (Freedom from defects)	-
9.1 (Finishing & Packing)	-

-
Test Facilty complete

11565

BIS, Central Laboratory (CL)

None

IS 2546 (1974)

Specification for galvanized mild steel fire bucket (First Revision)

- View breakup
Rs.4200/- and Material testing charges as per relevant referred Iss

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 2.1,2.2,2.3 (Carbon)	-
Cl. 2.1,2.2,2.3 (Sulphur)	-
Cl. 2.1,2.2,2.3 (Phosphorus)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm; Excluding Complete for material;

11566

BIS, Western Regional Laboratory (WRL)

None

IS 5986 (2017)

Hot rolled steel sheet, plate and strip for forming and flanging purposes - Specification (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 8 (UTM)	-
Cl 9 (Press)	-
Cl 10 (Sudden Load Applied)	-
Cl 15 (Length, Width & Thickness)	-
7.1 (Carbon %)	-
7.1 (Manganese %)	-
7.1 (Phosphorus %)	-
7.1 (Sulphur %)	-
7.1 (Silicon %)	-

-
Test facilities are not available for the following: 1. Micro alloy, Al, Cu, Ni, Cr, Mo 2. Hole Expansion Test Remark: Prepared piece of impact (3 nos)

11567

BIS, Western Regional Laboratory (WRL)

None

IS 2871 (2012)

Branch pipe, universal for fire fighting purpose - Specification (Second Revision)

Rs.2200/- (excl. operational test) View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 4 (Shape & Dimensions)	-
Cl 6.1 (Hydraulic Test)	-
Cl 6.2 (Operational Test)	-

-
-

11568

BIS, Central Laboratory (CL)

None

IS 3502 (2009)

Steel chequered plates (Third Revision)

- View breakup
Rs. 2985/- and material testing charges as per relevant referred Iss

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.4.1 (IS-2062, E250A) (CARBON)	-
Cl.4.1 (IS-2062, E250A) (SULPHUR)	-
Cl.4.1 (IS-2062, E250A) (PHOSPHURS)	-
Cl.4.1 (IS-2062, E250A) (MANGANESE)	-
Cl.4.1 (IS-2062, E250A) (SILICON)	-
Cl.4.1 (IS-2062, E250A) (CARBON EQUIVALENT)	-
Cl 5 (Workmanship)	-
Cl 6 (Workmanship)	-
Cl 8 (UTM)	-
Cl 9 (Press)	-
Cl 10 (Length, Width, Thickness & Chequered Height)	-
Cl 10 (Length, Width, Thickness & Chequered Height)	-
Cl. 11 (Weight)	-
Cl. 10 (Thickness)	-
Cl. 10 (Width)	-
Cl.8 (Elongation)	-
Cl.8 (Yield Stress)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm;

11569

BIS, Western Regional Laboratory (WRL)

None

IS 2415 (2015)

Cycle - Rubber tubes (Moulded/ Jointed) - Specification (Fourth Revision)

Rs 14270/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1,3.4, Annex A & Table 2. ( Flat Length )	-
5.1,3.5, Annex A & Table 2. (Flat Width)	-
5.2, Annex A (Thickness)	-
5.2.1 (Uniformity of Thickness)	-
6.1,Table 3 (i)Tensile strength:)	-
6.1,Table 3 (ii)Elongation at break )	-
6.3 (a) ( Ageing Test:- Tensile strength :)	-
6.3(b) ( Ageing Test :- Elongation at break)	-
6.4.1 (Joint Adhesion Strength)	-
6.4.3 ( Strength of splice on moulded tube)	-

-
Complete test facility,

11570

BIS, Central Laboratory (CL)

None

IS 2385 (1977)

Specification for hot - Rolled mild steel sheet and strip in coil form for cold - Reduced tinplate and cold - Reduced blackplate (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 5.1, 5.2 & Table1 (Carbon- Appropriate parts of IS 228 or any other established Instrumental/Chemical method.)	-
Cl. 5.1, 5.2 & Table1 (Manganese- Appropriate parts of IS 228 or any other established Instrumental/Chemical method.)	-
Cl. 5.1, 5.2 & Table1 (Sulphur- Appropriate parts of IS 228 or any other established Instrumental/Chemical method.)	-
Cl. 5.1, 5.2 & Table1 (Phosphorus- Appropriate parts of IS 228 or any other established Instrumental/Chemical method.)	-
Cl. 5.1, 5.2 & Table1 (Nitrogen- Appropriate parts of IS 228 or any other established Instrumental/Chemical method.)	-
Cl. 5.1, 5.2 & Table1 (Aluminium- Appropriate parts of IS 228 or any other established Instrumental/Chemical method.)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm; Excluding all complete for material only;

11571

BIS, Western Regional Laboratory (WRL)

None

IS 1971 (1996)

Crop protection equipment - Hand - Operated stirrup - Specifation (Fifth revision)

Rs 4800/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 6.1 (Discharge rate)	-
Cl 6.2 (Volumetric Efficiency)	-
Cl 6.3 (Endurance)	-
Cl 7.1 (Height)	-
Cl 7.2 (Total Mass)	-
Cl 7.3 (Pump Cylinder)	-
Cl 7.4 (Piston)	-
Cl 7.5 (Piston rod)	-
Cl 7.6 (handle)	-
Cl 7.9 (Stirrup & Foot Resr)	-
Cl 7.13.1 (Delivery Hose)	-
Cl 7.13.3 (cut Off device & Lance)	-
Cl 7.13.4 (Nozzle)	-

-
-

11572

BIS, Western Regional Laboratory (WRL)

None

IS 1970 (1995)

Cropprotection equipment - Hand - Operated compression - knapsack sprayer - Specification (Fifth Revision)

Rs.8700/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 6.1 (Tank & Skirt)	-
Cl 6.2 (Strap)	-
Cl 6.1 (Tank & Skirt)	-
Cl 6.3 (Filler Ring)	-
Cl 6.4 (Pump Cylinder)	-
Cl 6.5 (Piston)	-
Cl 6.7 (Handle)	-
Cl 6.8 (Valve Assembly)	-
Cl 6.9 (Delivery pipe)	-
Cl 6.13 (Delivery Hose)	-
Cl 6.15 (Nozzle)	-
Cl 6.14 (cut Off device & Lance)	-
Cl 6.17 (Height)	-
Cl 6.18 (Mass)	-
Cl 6.19 (Endurance)	-

-
-

11573

BIS, Western Regional Laboratory (WRL)

None

IS 5872 (1990)

Cold rolled steel strips (Box Strappings) - Specification

- View breakup
Rs 6050/- Excluding Corrosion Resistance and Micro-alloying elements

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 6 (UTM)	-
Cl 7 (Bending To Both Side At 90°, Then Straight)	-
Cl 10 (Width & Thickness)	-
5 (Chemical Composition)	-
5.0 & 5.1 , Table 1 & 2 (Carbon)	-
5.0 & 5.1 , Table 1 & 2 (Sulphur)	-
5.0 & 5.1 , Table 1 & 2 (Manganese)	-
5.0 & 5.1 , Table 1 & 2 (Phosphorus)	-

-
1. Micro alloying elements

11574

BIS, Northern Regional Laboratory (NRL)

None

IS 9890 (1981)

Specification for general purpose ball valves

Rs 4520/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5 (End connections)	-

-
Facility for chemical testing is not available

11575

BIS, Central Laboratory (CL)

None

IS 2266 (2019)

Steel wire ropes for general engineering purpose - Specification (Fifth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 8.2 (Phosphorus)	-
4 (Rope Size and Tolerance )	-
5 (Minimum Breaking Force)	-
6 (General Requirements)	-
7 (Construction)	-
8 (a) Fibre Core)	-
8 (b) Steel Core)	-
9 (Joints)	-
10 (Galvanizing)	-
12 (d) lay)	-
12 (f) length of wire rope)	-
Clause 8.2 (Grade-1, Table-1, IS 1835:1976, Carbon)	-
Clause 8.2 (Sulphur)	-
8 (a) Fibre Core)	-
Clause 8.2 (Manganese)	-
Clause 8.2 (Silicon)	-
Clause 8.2 (Copper)	-
Clause 8.2 (Nickel)	-
Clause 8.2 (Chromium)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm; Complete for dia 18 to 22 mm Excluding only C & S tested for dia < 3mm; Min Breaking Force (Cl 5) (For dia Up to 18 and above 22 mm)

11576

BIS, Northern Regional Laboratory (NRL)

None

IS 4398 (1994)

Carbon - Chromium steel for the manufacture of balls, rollers and bearing races - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
8 ( Hardness-IS 1500: Pt 1)	-
Cl. 5.1 & Table 1 (Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5.1 & Table 1 (Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5.1 & Table 1 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5.1 & Table 1 (Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5.1 & Table 1 (Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-

-
Microstructure, Inclusion, Decarburization, Cr, Ni, Mo, Cu, V and Ti.

11577

BIS, Western Regional Laboratory (WRL)

None

IS 12786 (1989)

Irrigation equipment - Polyethylene pipes for irrigation laterals - Specification

- View breakup
Rs. 7800.00 (Excluding Testing Charges for Material Test) Rs. 3600.00 (Testing Charges for Material Test)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.3 (Tensile Test)	-
7.3 (Elongation at Break)	-
7.4 (SusceptibiIity to Environmental Stress Cracking)	-
7.3 (Tensile Test)	-
5 and Table 1 (DIMENSIONS OF PIPES - outside diameters)	-
5 and Table 1 (DIMENSIONS OF PIPES - wall thickness shall)	-
7.2 (Reversion Test)	-
7.1 Table-2 (b)Acceptance Test for 01 hour at 20°C & 6.9MPa induced stress)	-
6.1 (Visual Appearance)	-
3.1 (Class of Pipe)	-
4.2.b (The dispersion of Carbon Black content shall be satisfactory - IS 2530 : 1963)	-

-
The following test facilities are not available: (1) Hydraulic characteristics (quality test) (2) Carbon black content

11578

BIS, Western Regional Laboratory (WRL)

None

IS 1825 (1983)

Specification for aluminium alloy milk cans (Second Revision)

Rs 4800.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5 (h) Mass 6.5 Kg. Min.)	-
2 (Capacity)	-
4 Fig. 1 (Dimension)	-
4 Fig. 1 (Dimension)	-
4 Fig. 1 (Dimension)	-
4 Fig. 1 (Dimension)	-
4 Fig. 1 (Drain Holes )	-
4 Fig. 1 (Dimension)	-
4 Fig. 1 (Dimension)	-
4 Fig. 1 (Dimension)	-
4 Fig. 1 (Dimension)	-
4 Fig. 1 (Dimension)	-
4 Fig. 1 (Dimension)	-
4 Fig. 1 (Dimension)	-
4 Fig. 1 (Dimension)	-
4 Fig. 1 (Dimension)	-
4 Fig. 1 (Dimension)	-
4 Fig. 1 (Hole Dia 8 ,2 holes)	-
4 Fig. 1 (Hole Dia 12, 3 holes)	-
5 (i) If the thickness at shoulder is less than 2.5 mm a )	-
5 (reinforcement ring of 2 mm thickness shall be provided.)	-
5 (ii) Brinell Hardness 85 HB Min.)	-
7 (i) Air Pressure Test (Cl 7.1))	-
7 (ii) Drop Test (Cl 7.2))	-
7 (iii) The cans when filled with water and inverted shall not show any profuse leakage through lids. )	-

-
-

11579

BIS, Northern Regional Laboratory (NRL)

None

IS 10086 (1982)

Specificaton for moulds for use in tests of cement and concrete

Rs 14700/- and Material testing charges as per relevan View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Dimension and tolerances of cylindrical moulds Table 3)	-
Cl 5.1 (Construction)	-
Cl 5.3 (Arangement for fastening / Clamping)	-
4.1 (Dimension and Tolerances of Cube Moulds Table 2)	-
4.1 (Dimension and Tolerances of Cube Moulds Table 2)	-
4.1 (Dimension and Tolerances of Cube Moulds Table 2)	-
4.1 (Dimension and Tolerances of Cube Moulds Table 2)	-
4.1 (Dimension and Tolerances of Cube Moulds Table 2)	-
4.1 (Dimension and Tolerances of Cube Moulds Table 2)	-
5.1.1 (Construction)	-
4.1 (Dimension and Tolerances of Cube Moulds Table 2)	-
5.1.2 (Construction)	-
5.2.1 (Cube Mould)	-
5.2.2 (Cylindrical Mould (Fig.3))	-
5.2.3 (Beam Mould (Fig. 4))	-
5.2.4 (Bar Mould ( Fig. 5, 6, 7 & 8 ))	-
4.1 (Dimension and Tolerances of Cube Moulds Table 2)	-
4.1 (Dimension and Tolerances of Cube Moulds Table 2)	-
4.1 (Dimension and Tolerances of Cube Moulds Table 2)	-
4.1 (Dimension and tolerances of cylindrical moulds Table 3)	-
4.1 (Dimension and tolerances of beam moulds Table 4)	-
4.1 (Dimension and Tolerances of bar moulds Table 5)	-
2.1 (Types)	-
2.1 (Types)	-
2.1 (Types)	-
2.1 (Types)	-
2.1 (Types)	-
4.1 (Dimension and tolerances of cylindrical moulds Table 3)	-

-
Standard has been revised as IS 10086 : 2021 Except Shore Hardness, Dimension stability , Drop test , Facility for chemical testing is not available

11580

BIS, Western Regional Laboratory (WRL)

None

IS 5504 (1997)

Specification for spiral welded pipes (First Revision)

testing charges for the product are Rs 8640/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 5.1 (Carbon)	-
Cl. 5.1 (Phosphorus)	-
Cl. 5.1 (Sulphur)	-
6.1 (Tensile Test)	-
6.2 (Flattening Test)	-
6.3/6.3.1.1 (Submerged Arc Weld Test- Guided bend test)	-
8.1 (Length)	-
8.2 (Dimensions)	-

-
Test facilities are not available for the following: 1. Hydrostatic Pressure test 2. Size above 914 mm nominal diameter

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number