BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15122 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

10081

MICRO ENGINEERING AND TESTING LABORATORY OPC PRIVATE LIMITED, SONIPAT

9186006

IS 2062 (2011)

Hot rolled medium and high tensile structural steel - Specification (Seventh Revision)

13500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 18(Weight)	-	300	-
Cl 15(Length, Width & Thickness)	-	900	-
Cl 11.3(Press)	-	400	-
Cl 10.3(UTM)	-	2000	-
Cl 18(Weight)	-	300	-
Cl 15(Length, Width & Thickness)	-	900	-
Cl 11.3(Press)	-	400	-
Cl 10.3(UTM)	-	2000	-
Cl 18(Weight)	-	300	-
Cl 15(Length, Width & Thickness)	-	900	-
Cl 11.3(Press)	-	400	-
Cl 10.3(UTM)	-	2000	-
Cl. 10.3 (Cl. 10.3 (Elongation %))	-	500	-
Cl. 10.3 (Cl. 10.3 (Yield Stress))	-	400	-
Cl. 10.3 (Cl. 10.3 (Tensile Strength))	-	1100	-
Cl 18(Weight)	-	300	-
Cl 15(Length, Width & Thickness)	-	900	-
Cl 11.3(Press)	-	400	-
Cl 10.3(UTM)	-	2000	-
Cl 10.3(UTM)	-	2000	-
Cl 11.3(Press)	-	400	-
Cl 15(Length, Width & Thickness)	-	900	-
Cl 18(Weight)	-	300	-
Clause 11.3(IS 1599)	-	0	-
Clause 15, Table 4(IS 2062)	-	0	-
16(Tolerance)	-	0	-
20(Marking)	-	200	-
20(MARKING)	-	200	-
10(Tensile Strength-IS:1608(P1)-22)	-	500	-
10(Yield Stress-IS:1608(P1)-22)	-	400	-
10(Elongation on SoA 5.65mm GL)	-	500	-
15(Mass -SOP MT-23)	-	500	-
15(Sectional Area)	-	500	-
15(Dimension -D)	-	500	-
15(Dimension -B)	-	500	-
15(Thickness - t)	-	500	-
15(Thickness - T)	-	500	-
15(Flange Slope)	-	300	-
15(Radius R1)	-	500	-
15(Radius R2)	-	500	-
15(Mass -SOP MT-23)	-	500	-
15(Sectional Area)	-	300	-
15(Dimension -D)	-	300	-
15(Dimension -B)	-	300	-
15(Thickness - t)	-	300	-
15(Thickness - T)	-	300	-
15(Radius R1)	-	500	-
15(Radius R2)	-	500	-
15(Mass -SOP MT-23)	-	300	-
15(Sectional Area)	-	300	-
15(Dimensions AxB)	-	300	-
15(Thickness - t)	-	300	-
15(Radius -R1)	-	300	-
15(Radius -R2)	-	300	-
15(Diameter)	-	300	-
15(Sectional Area)	-	300	-
15(Mass per metre)	-	300	-
15(Mass per metre)	-	300	-
15(Ovality)	-	300	-
15(Side Width)	-	300	-
15(Sectional Area)	-	300	-
15(Mass per metre)	-	300	-
15(Out of Square)	-	300	-
9(Preparation of test sample)	-	300	-
Clause 7(Freedom from Defect)	-	300	-
Clause 11.3(Bend Test)	-	500	-
Clause 15, Table 4(Dimension)	-	300	-
5(General Requirements)	-	300	-
4(MARKING)	-	300	-
Clause - 5, 8.1 & 8.2(E650, CARBON +EQUIVELENT )	-	300	-
Clause - 5, 8.1 & 8.2(E650, ALUMINIUM)	-	300	-
Clause - 5, 8.1 & 8.2(E650, SILICON)	-	300	-
Clause - 5, 8.1 & 8.2(E650, NITROGEN)	-	300	-
Clause - 5, 8.1 & 8.2(E650 ,MANGANESE)	-	300	-
Clause - 5, 8.1 & 8.2(E650, PHOSPHURS)	-	300	-
Clause - 5, 8.1 & 8.2(E650, SULPHUR)	-	300	-
Clause - 5, 8.1 & 8.2(E650, CARBON)	-	300	-
Clause - 5, 8.1 & 8.2(E600, CARBON +EQUIVELENT )	-	300	-
Clause - 5, 8.1 & 8.2(E600, ALUMINIUM)	-	300	-
Clause - 5, 8.1 & 8.2(E600, SILICON)	-	300	-
Clause - 5, 8.1 & 8.2(E600, NITROGEN)	-	300	-
Clause - 5, 8.1 & 8.2(E600 ,MANGANESE)	-	300	-
Clause - 5, 8.1 & 8.2(E600, PHOSPHURS)	-	300	-
Clause - 5, 8.1 & 8.2(E600, SULPHUR)	-	300	-
Clause - 5, 8.1 & 8.2(E600, CARBON)	-	300	-
Clause - 5, 8.1 & 8.2(E550, CARBON +EQUIVELENT )	-	300	-
Clause - 5, 8.1 & 8.2(E550, ALUMINIUM)	-	300	-
Clause - 5, 8.1 & 8.2(E550, SILICON)	-	300	-
Clause - 5, 8.1 & 8.2(E550, NITROGEN)	-	300	-
Clause - 5, 8.1 & 8.2(E550 ,MANGANESE)	-	300	-
Clause - 5, 8.1 & 8.2(E550, PHOSPHURS)	-	300	-
Clause - 5, 8.1 & 8.2(E550, SULPHUR)	-	300	-
Clause - 5, 8.1 & 8.2(E550, CARBON)	-	300	-
Clause - 5, 8.1 & 8.2(E450, CARBON +EQUIVELENT )	-	300	-
Clause - 5, 8.1 & 8.2(E450, ALUMINIUM)	-	300	-
Clause - 5, 8.1 & 8.2(E450, SILICON)	-	300	-
Clause - 5, 8.1 & 8.2(E450, NITROGEN)	-	300	-
Clause - 5, 8.1 & 8.2(E450 ,MANGANESE)	-	300	-
Clause - 5, 8.1 & 8.2(E450, PHOSPHURS)	-	300	-
Clause - 5, 8.1 & 8.2(E450, SULPHUR)	-	300	-
Clause - 5, 8.1 & 8.2(E450, CARBON)	-	300	-
Clause - 5, 8.1 & 8.2(E410, CARBON +EQUIVELENT )	-	300	-
Clause - 5, 8.1 & 8.2(E410, ALUMINIUM)	-	300	-
Clause - 5, 8.1 & 8.2(E410, SILICON)	-	300	-
Clause - 5, 8.1 & 8.2(E410, NITROGEN)	-	300	-
Clause - 5, 8.1 & 8.2(E410 ,MANGANESE)	-	300	-
Clause - 5, 8.1 & 8.2(E410, PHOSPHURS)	-	300	-
Clause - 5, 8.1 & 8.2(E410, SULPHUR)	-	300	-
Clause - 5, 8.1 & 8.2(E410, CARBON)	-	300	-
Clause - 5, 8.1 & 8.2(E350, CARBON +EQUIVELENT )	-	300	-
Clause - 5, 8.1 & 8.2(E350, ALUMINIUM)	-	300	-
Clause - 5, 8.1 & 8.2(E350, SILICON)	-	300	-
Clause - 5, 8.1 & 8.2(E350, NITROGEN)	-	300	-
Clause - 5, 8.1 & 8.2(E350 ,MANGANESE)	-	300	-
Clause - 5, 8.1 & 8.2(E350, PHOSPHURS)	-	300	-
Clause - 5, 8.1 & 8.2(E350, SULPHUR)	-	300	-
Clause - 5, 8.1 & 8.2(E350, CARBON)	-	300	-
Clause - 5, 8.1 & 8.2(E300, CARBON +EQUIVELENT )	-	300	-
Clause - 5, 8.1 & 8.2(E300, ALUMINIUM)	-	300	-
Clause - 5, 8.1 & 8.2(E300, SILICON)	-	300	-
Clause - 5, 8.1 & 8.2(E300, NITROGEN)	-	300	-
Clause - 5, 8.1 & 8.2(E300 ,MANGANESE)	-	300	-
Clause - 5, 8.1 & 8.2(E300, PHOSPHURS)	-	300	-
Clause - 5, 8.1 & 8.2(E300, SULPHUR)	-	300	-
Clause - 5, 8.1 & 8.2(E300, CARBON)	-	300	-
Clause - 5, 8.1 & 8.2(E275, CARBON +EQUIVELENT )	-	300	-
Clause - 5, 8.1 & 8.2(E275, ALUMINIUM)	-	300	-
Clause - 5, 8.1 & 8.2(E275, SILICON)	-	300	-
Clause - 5, 8.1 & 8.2(E275, NITROGEN)	-	300	-
Clause - 5, 8.1 & 8.2(E275 ,MANGANESE)	-	300	-
Clause - 5, 8.1 & 8.2(E275, PHOSPHURS)	-	300	-
Clause - 5, 8.1 & 8.2(E275, SULPHUR)	-	300	-
Clause - 5, 8.1 & 8.2(E275, CARBON)	-	300	-
Clause - 5, 8.1 & 8.2(E250, CARBON +EQUIVELENT )	-	300	-
Clause - 5, 8.1 & 8.2(E250, ALUMINIUM)	-	300	-
Clause - 5, 8.1 & 8.2(E250, SILICON)	-	300	-
Clause - 5, 8.1 & 8.2(E250, NITROGEN)	-	300	-
Clause - 5, 8.1 & 8.2(E250 ,MANGANESE)	-	300	-
Clause - 5, 8.1 & 8.2(E250, PHOSPHURS)	-	300	-
Clause - 5, 8.1 & 8.2(E250, SULPHUR)	-	300	-
Clause - 5, 8.1 & 8.2(E250, CARBON)	-	300	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Carbon Equivalent- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	-
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	-
Clause 8, Table 1, Note 2(Any Instrumental Method/Chemical Method)	-	300	-
Clause 8, Table 1, Note 5(Any Instrumental Method/Chemical Method)	-	300	-
Clause 8, Table 1, Note 5(Any Instrumental Method/Chemical Method)	-	300	-
Clause 8, Table 1, Note 5(By Calculation)	-	300	-
Clause 8, Table 1, Note 6(Any Instrumental Method/Chemical Method)	-	300	-
Clause 8, Table 1, Note 6(By Calculation)	-	300	-
Clause 7(IS 2062)	-	0	-
8(Micro Alloying elements)	-	1000	-
8(Niobium as Nb)	-	300	-
8(Vanadium as V)	-	300	-
8(Titanium as Ti)	-	300	-
Clause 8, Table 1, Note 2(Aluminium)	-	300	-
Clause 8, Table 1, Note 5(Niobium)	-	300	-
Clause 8, Table 1, Note 5(Titanium)	-	300	-
Clause 8, Table 1, Note 5(Nb+V+Ti)	-	500	-
Clause 8, Table 1, Note 6(Boron)	-	300	-
Clause 8, Table 1, Note 6(Cr+Ni)	-	400	-
Cl 13(Y Groove Cracking Test)	-	1000	-
Cl 12(Sudden Load Applied)	-	1000	-
Cl 7(Workmanship)	-	300	-
Cl 13(Y Groove Cracking Test)	-	1000	-
Cl 12(Sudden Load Applied)	-	1000	-
Cl 7(Workmanship)	-	300	-
Cl 13(Y Groove Cracking Test)	-	1000	-
Cl 12(Sudden Load Applied)	-	1000	-
Cl 7(Workmanship)	-	300	-
Cl. 15 (Cl. 15 Channel Section: Sweep)	-	300	-
Cl. 15(Cl. 15 Channel Section: Camber)	-	300	-
Cl. 15(Cl. 15 Channel Section: Flatness of Web (Concavity))	-	300	-
Cl. 15(Cl. 15 Channel Section: Flatness of Web (Convexity))	-	300	-
Cl. 15(Cl. 15 Channel Section: Flange Out of Square)	-	300	-
Cl. 15(Cl. 15 Channel Section: Width of Flange)	-	300	-
Cl. 15(Cl. 15 Channel Section: Depth)	-	300	-
Cl. 15(Cl. 15 Square Bar: Out of Square)	-	300	-
Cl. 15(Cl. 15 Square Bar: Side Width: Minimum)	-	300	-
Cl. 15(Cl. 15 Square Bar: Side Width: Maximum)	-	300	-
Cl. 15(Cl. 15 Round Bar: Out of Shape)	-	300	-
Cl. 15(Cl. 15 Round Bar: Diameter Minimum)	-	300	-
Cl. 15(Cl. 15 Round Bar: Diameter Maximum)	-	300	-
Cl. 15, 16(Off Centre of Web)	-	300	-
Cl. 15, 16(Flange out of square (I beam))	-	300	-
Cl. 15, 16(Width of flange (I Beam))	-	300	-
Cl. 15, 16(Depth (I Beam))	-	300	-
Cl. 15, 16(Mass (Plate))	-	300	-
Cl. 15, 16(Flange Slope)	-	300	-
Cl. 15, 16(Web Thickness)	-	500	-
Cl. 15, 16(Flange Thickness)	-	500	-
Cl. 15, 16(Out of Square (Flat))	-	300	-
Cl. 15, 16(Width )	-	300	-
Cl. 15, 16(Thickness )	-	500	-
Cl. 15, 16(Sectional Area )	-	300	-
Cl. 15, 16(Camber (Angle))	-	300	-
Cl. 15, 16(Out of Square (Angle))	-	300	-
Cl. 15, 16(Weight)	-	300	-
Cl. 15, 16(Leg Length Difference (Angle))	-	300	-
Cl. 15, 16(Leg Length B (Angle))	-	300	-
Cl. 15, 16(Leg Length A (Angle))	-	300	-
Cl. 15, 16(Toe Radius R2)	-	500	-
Cl 13(Y Groove Cracking Test)	-	1000	-
Cl 12(Sudden Load Applied)	-	1000	-
Cl 7(Workmanship)	-	300	-
14.1(Soundness test)	-	1800	-
14.2(Grain Size)	-	600	-
14.2(Inclusion)	-	300	-
Cl 7(Workmanship)	-	300	-
Cl 12(Sudden Load Applied)	-	1000	-
Cl 13(Y Groove Cracking Test)	-	1000	-
Clause 12(IS 1757)	-	0	-
Cl. 15, 16(Root Radius R1)	-	500	-
Clause 12(Impact Test)	-	800	-

04 Jun, 2028

-
-

10082

MICRO ENGINEERING AND TESTING LABORATORY OPC PRIVATE LIMITED, SONIPAT

9186006

IS 9103 (1999)

Specification for Concrete Admixtures -

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 9, Table- 2(Dry material content )	-	950	-
Clause 9, Table- 2(Ash content)	-	700	-
Clause 9, Table- 2(Relative density)	-	700	-
Clause 9, Table- 2(Chloride ion content)	-	1150	-
Clause 9, Table- 2( pH)	-	450	-
Clause 9, Table- 2(Dry material content )	-	950	-
Clause 9, Table- 2(Ash content)	-	700	-
Clause 9, Table- 2(Relative density)	-	700	-
Clause 9, Table- 2(Chloride ion content)	-	1150	-
Clause 9, Table- 2( pH)	-	450	-
Cl 9 Table 2(Dry material content ( a-For liquid admixture, b- For solid admixture), Ash content, Relative density, Chloride ion content, pH)	-	0	-
Cl 9 Table 2(Dry material content ( a-For liquid admixture, b- For solid admixture), Ash content, Relative density, Chloride ion content, pH)	-	0	-
Cl 4, Table 1A(Slump)	-	2400	-
Cl 4, Table 1 B(Flow, Loss of workability on satnding, Minimum compressive strength ( 7 Days,28 Days, 6 Month and 1 Year))	-	5500	-
Cl 4, Table 1A(Water Content, percent of control sample, Max)	-	1800	-
Cl 4, Table 1 B(Flow)	-	5500	-
Cl 4, Table 1A(Time of setting, allowable deviation from control sample hours)	-	2900	-
Cl 4, Table 1A(Compressive strength, percent of control sample, Min)	-	5500	-
Cl 4, Table 1A(Flexural strength, percent of control sample, Min)	-	4000	-
Cl 4, Table 1A(Length change, percent increase over control sample, Max)	-	4000	-
Cl 4, Table 1A(Bleeding, percent increase over control sample, Max)	-	4000	-
Cl 4, Table 1A(Loss of workability)	-	3200	-
Cl 4, Table 1A(Air content (%), Max, over control)	-	2500	-
Cl 4, Table 1 B(Loss of workability on standing)	-	3200	-
Cl 4, Table 1 B(Minimum compressive strength ( 7 Days,28 Days, 6 Month and 1 Year))	-	5500	-
Clause 4, Table 1B, SI no. (iii) (1 year minimum compressive strength, percent of control mix concrete)	-	0	-
Clause 4, Table 1B, SI no. (iii) (6 months minimum compressive strength, percent of control mix concrete)	-	0	-
Clause 4, Table 1B, SI no. (iii) (28 days minimum compressive strength, percent of control mix concrete)	-	0	-
Clause 4, Table 1B, SI no. (iii) (7 days minimum compressive strength, percent of control mix concrete)	-	0	-
Clause 4, Table 1A, SI no. (v) (28 days flexural strength, percent of control sample)	-	0	-
Clause 4, Table 1A, SI no. (v) (7 days flexural strength, percent of control sample)	-	0	-
Clause 4, Table 1A, SI no. (v) (3 days flexural strength, percent of control sample)	-	0	-
Clause 4, Table 1A, SI no. (iv) (1 year compressive strength, percent of control sample)	-	0	-
Clause 4, Table 1A, SI no. (iv) (6 months compressive strength, percent of control sample)	-	0	-
Clause 4, Table 1A, SI no. (iv) (28 days compressive strength, percent of control sample)	-	0	-
Clause 4, Table 1A, SI no. (iv) (7 days compressive strength, percent of control sample)	-	0	-
Clause 4, Table 1A, SI no. (iv) (3 days compressive strength, percent of control sample)	-	0	-
Clause 4, Table 1A, SI no. (iv) (1 day compressive strength, percent of control sample)	-	0	-
Clause 4, Table 1A, SI no. (iii) (Final time of setting allowable deviation from control sample)	-	0	-
Clause 4, Table 1A, SI no. (iii) (Initial time of setting allowable deviation from control sample)	-	0	-
4, Table 1B( minimum Compressive strength percent of control mix concrete 1 Year )	-	0	-
4, Table 1B( minimum Compressive strength percent of control mix concrete 6 Months days)	-	0	-
4, Table 1B( minimum Compressive strength percent of control mix concrete 28 days)	-	0	-
4, Table 1B( minimum Compressive strength percent of control mix concrete 7 days)	-	0	-
4, Table 1A(Compressive strength percent of control Sample 1 year )	-	0	-
4, Table 1A(Compressive strength percent of control Sample 6 Months )	-	0	-
4, Table 1A(Compressive strength percent of control Sample 28 Days )	-	0	-
4, Table 1A(Compressive strength percent of control Sample 7 Days)	-	0	-
4, Table 1A(Compressive strength percent of control Sample 3 Days)	-	0	-
4, Table 1A(Compressive strength percent of control Sample 1 Day )	-	0	-
4, Table 1A(Length Change percent Increase over control Sample 1 year)	-	0	-
4, Table 1A(Length Change percent Increase over control Sample 6 Month)	-	0	-
4, Table 1A(Length Change percent Increase over control Sample 28 Day)	-	0	-
4, Table 1A(Flexural strength percent of control Sample 28 Day)	-	0	-
4, Table 1A(Flexural strength percent of control Sample 7 Day)	-	0	-
4, Table 1A(Flexural strength percent of control Sample 3 Day)	-	0	-

04 Jun, 2028

-
-

10083

MICRO ENGINEERING AND TESTING LABORATORY OPC PRIVATE LIMITED, SONIPAT

9186006

IS 277 (2018)

Galvanized steel strips and sheets (Plain And Corrugated) - Specification (Seventh Revision)

Galvanized Steel Strips and Sheets (Plain&Corrugated)

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 10(Galvanising Test)	-	500	-
Cl 10(Galvanising Test)	-	500	-
7.4(Mass of Coating: Single Spot Test)	-	1000	-
7.4(Mass of Coating: Triple Spot Test)	-	1000	-
7.4(Mass of Coating: Single Spot Test)	-	1000	-
7.4(Mass of Coating: Triple Spot Test)	-	1000	-
7.4(Mass of Coating: Single Spot Test)	-	1000	-
7.4(Mass of Coating: Triple Spot Test)	-	1000	-
7.1 & 10.2(Mass of Coating: Single Spot Test)	-	1000	-
7.1 & 10.2(Mass of Coating: Triple Spot Test)	-	1000	-
7.1 & 10.2(Mass of Coating: Single Spot Test)	-	1000	-
7.1 & 10.2(Mass of Coating: Triple Spot Test)	-	1000	-
7.1 & 10.2(Mass of Coating: Single Spot Test)	-	1000	-
7.1 & 10.2(Mass of Coating: Triple Spot Test)	-	1000	-
7.1 & 10.2(Mass of Coating: Single Spot Test)	-	1000	-
7.1 & 10.2(Mass of Coating: Triple Spot Test)	-	1000	-
7.1 & 10.2(Mass of Coating: Single Spot Test)	-	1000	-
7.1 & 10.2(Mass of Coating: Triple Spot Test)	-	1000	-
7.1 & 10.2(Mass of Coating: Single Spot Test)	-	1000	-
7.1 & 10.2(Mass of Coating: Triple Spot Test)	-	1000	-
7.1 & 10.2(Mass of Coating: Single Spot Test)	-	1000	-
7.1 & 10.2(Mass of Coating: Triple Spot Test)	-	1000	-
7.1 & 10.2(Mass of Coating: Single Spot Test)	-	1000	-
7.1 & 10.2(Mass of Coating: Triple Spot Test)	-	1000	-
7.1 & 10.2(Mass of Coating: Single Spot Test)	-	1000	-
7.1 & 10.2(Mass of Coating: Triple Spot Test)	-	1000	-
5.1(phosphorus)	-	300	-
5.1(copper)	-	300	-
5.1(nitrogen)	-	300	-
5.1(nitrogen)	-	300	-
5.1(micro alloy)	-	300	-
5.1(micro alloy)	-	300	-
5.1(aluminium)	-	300	-
5.1(silicon )	-	300	-
5.1(silicon )	-	300	-
5.1(aluminium)	-	300	-
5.1(manganese)	-	300	-
5.1(phosphorus)	-	300	-
5.1(sulphur)	-	300	-
5.1(carbon)	-	300	-
5.1(manganese)	-	300	-
5.1(phosphorus)	-	300	-
5.1(sulphur)	-	300	-
5.1(carbon)	-	300	-
5.1(manganese)	-	300	-
5.1(phosphorus)	-	300	-
5.1(sulphur)	-	300	-
5.1(carbon)	-	300	-
5.1(manganese)	-	300	-
5.1(phosphorus)	-	300	-
5.1(sulphur)	-	300	-
5.1(carbon)	-	300	-
5.1(manganese)	-	300	-
5.1(phosphorus)	-	300	-
5.1(sulphur)	-	300	-
5.1(carbon)	-	300	-
5.1(manganese)	-	300	-
5.1(phosphorus)	-	300	-
5.1(sulphur)	-	300	-
5.1(carbon)	-	300	-
5.1(manganese)	-	300	-
5.1(phosphorus)	-	300	-
5.1(sulphur)	-	300	-
5.1(carbon)	-	300	-
5.1(manganese)	-	300	-
5.1(phosphorus)	-	300	-
5.1(sulphur)	-	300	-
5.1(carbon)	-	300	-
5.1(Titanium)	-	300	-
5.1(manganese)	-	300	-
5.1(phosphorus)	-	300	-
5.1(sulphur)	-	300	-
5.1(carbon)	-	300	-
5.1(manganese)	-	300	-
5.1(phosphorus)	-	300	-
5.1(sulphur)	-	300	-
5.1(carbon)	-	300	-
5.1(manganese)	-	300	-
5.1(phosphorus)	-	300	-
5.1(sulphur)	-	300	-
5.1(carbon)	-	300	-
5.1(manganese)	-	300	-
5.1(sulphur)	-	300	-
5.1(phosphorus)	-	300	-
5.1(carbon)	-	300	-
5.1(manganese)	-	300	-
5.1(phosphorus)	-	300	-
5.1(carbon)	-	300	-
5.1(sulphur)	-	300	-
5.1(manganese)	-	300	-
5.1(phosphorus)	-	300	-
5.1(sulphur)	-	300	-
5.1(carbon)	-	300	-
5.1(manganese)	-	300	-
5.1(phosphorus)	-	300	-
5.1(sulphur)	-	300	-
5.1(carbon)	-	300	-
cl 5.1, T-1, Note-6, For reinforced steel(P)	-	300	-
cl 5.1, T-1, Note-5, For Microalloying elements(Nb+V+Ti+B)	-	300	-
cl 5.1, T-1, Note-5, For Microalloying elements(B)	-	300	-
cl 5.1, T-1, Note-5, For Microalloying elements(Ti)	-	300	-
cl 5.1, T-1, Note-5, For Microalloying elements(V)	-	300	-
cl 5.1, T-1, Note-5, For Microalloying elements(Nb)	-	300	-
cl 5.1, T-1, Note-4, For Cu bearing quality(Cu)	-	300	-
cl 5.1, T-1, Note-2, When Al-Si killed(Si)	-	300	-
cl 5.1, T-1, Note-2, When Al-Si killed(Al)	-	300	-
cl 5.1, T-1, Note-2, When Si killed(Si)	-	300	-
cl 5.1, T-1, Note-2, When Al killed(Al)	-	300	-
cl 5.1, T-1, Note-3(N2)	-	300	-
cl 5.1, T-1, designation For GP 550(P)	-	300	-
cl 5.1, T-1, designation For GP 550(S)	-	300	-
cl 5.1, T-1, designation For GP 550(Mn)	-	300	-
cl 5.1, T-1, designation For GP 550(C)	-	300	-
cl 5.1, T-1, Note-3(N2)	-	300	-
cl 5.1, T-1, designation For GP 450(P)	-	300	-
cl 5.1, T-1, designation For GP 450(S)	-	300	-
cl 5.1, T-1, designation For GP 450(Mn)	-	300	-
cl 5.1, T-1, designation For GP 450(C)	-	300	-
cl 5.1, T-1, Note-3(N2)	-	300	-
cl 5.1, T-1, designation For GP 350 class-2(P)	-	300	-
cl 5.1, T-1, designation For GP 350 class-2(S)	-	300	-
cl 5.1, T-1, designation For GP 350 class-2(Mn)	-	300	-
cl 5.1, T-1, designation For GP 350 class-2(C)	-	300	-
cl 5.1, T-1, Note-3(N2)	-	300	-
cl 5.1, T-1, designation For GP 350 class-1(P)	-	300	-
cl 5.1, T-1, designation For GP 350 class-1(S)	-	300	-
cl 5.1, T-1, designation For GP 350 class-1(Mn)	-	300	-
cl 5.1, T-1, designation For GP 350 class-1(C)	-	300	-
cl 5.1, T-1, Note-3(N2)	-	300	-
cl 5.1, T-1, designation For GP 300(P)	-	300	-
cl 5.1, T-1, designation For GP 300(S)	-	300	-
cl 5.1, T-1, designation For GP 300(Mn)	-	300	-
cl 5.1, T-1, designation For GP 300(C)	-	300	-
cl 5.1, T-1, Note-3(N2)	-	300	-
cl 5.1, T-1, designation For GP275(P)	-	300	-
cl 5.1, T-1, designation For GP275(S)	-	300	-
cl 5.1, T-1, designation For GP275(Mn)	-	300	-
cl 5.1, T-1, designation For GP275(C)	-	300	-
cl 5.1, T-1, Note-3(N2)	-	300	-
cl 5.1, T-1, designation For GP250(P)	-	300	-
cl 5.1, T-1, designation For GP250(S)	-	300	-
cl 5.1, T-1, designation For GP250(Mn)	-	300	-
cl 5.1, T-1, designation For GP250(C)	-	300	-
cl 5.1, T-1, Note-3(N2)	-	300	-
cl 5.1, T-1, designation For GP230(P)	-	300	-
cl 5.1, T-1, designation For GP230(Mn)	-	300	-
cl 5.1, T-1, designation For GP230(S)	-	300	-
cl 5.1, T-1, designation For GP230(C)	-	300	-
cl 5.1, T-1, Note-3(N2)	-	300	-
cl 5.1, T-1, designation For GPIF(P)	-	300	-
cl 5.1, T-1, designation For GPIF(S)	-	300	-
cl 5.1, T-1, designation For GPIF(Mn)	-	300	-
cl 5.1, T-1, designation For GPIF(C)	-	300	-
cl 5.1, T-1, Note-3(N2)	-	300	-
cl 5.1, T-1, designation For GPED(P)	-	300	-
cl 5.1, T-1, designation For GPED(S)	-	300	-
cl 5.1, T-1, designation For GPED(Mn)	-	300	-
cl 5.1, T-1, designation For GPED(C)	-	300	-
cl 5.1, T-1, Note-3(N2)	-	300	-
cl 5.1, T-1, designation For GPD(P)	-	300	-
cl 5.1, T-1, designation For GPD(S)	-	300	-
cl 5.1, T-1, designation For GPD(Mn)	-	300	-
cl 5.1, T-1, designation For GPD(C)	-	300	-
cl 5.1, T-1, Note-3(N2)	-	300	-
cl 5.1, T-1, designation For GPL(P)	-	300	-
cl 5.1, T-1, designation For GPL(S)	-	300	-
cl 5.1, T-1, designation For GPL(Mn)	-	300	-
cl 5.1, T-1, designation For GPL(C)	-	300	-
cl 5.1, T-1, Note-3(N2)	-	300	-
cl 5.1, T-1, designation For GC(P)	-	300	-
cl 5.1, T-1, designation For GC(S)	-	300	-
cl 5.1, T-1, designation For GC(Mn)	-	300	-
cl 5.1, T-1, designation For GC(C)	-	300	-
cl 5.1, T-1, Note-3(N2)	-	300	-
cl 5.1, T-1, designation For GPH (P)	-	300	-
cl 5.1, T-1, designation For GPH (S)	-	300	-
cl 5.1, T-1, designation For GPH (Mn)	-	300	-
cl 5.1, T-1, designation For GPH (C)	-	300	-
cl 5.1, T-1, Note-3(N2)	-	300	-
cl 5.1, T-1, designation For GP (P)	-	300	-
cl 5.1, T-1, designation For GP (S)	-	300	-
cl 5.1, T-1, designation For GP (Mn)	-	300	-
cl 5.1, T-1, designation For GP (C)	-	300	-
Cl 10(Galvanising Test)	-	300	-
Cl 10(Galvanising Test)	-	300	-
5(Titanium as Ti)	-	300	-
5(Niobium as Nb)	-	300	-
5(Boron as B)	-	300	-
5(Micro Alloying Elements (Nb+V+Ti + B))	-	300	-
5(Copper as Cu)	-	300	-
7.1(Zinc Coating Conformation)	-	500	-
Cl 8.1(UTM)	-	2000	-
Cl 8.2(Press)	-	400	-
Cl. 9(Surface roughness)	-	200	-
Cl 14(Length, Width & Thickness)	-	900	-
Cl 13(Weight)	-	400	-
Cl 12(Workmanship)	-	400	-
Cl 8.1(UTM)	-	2000	-
Cl 8.2(Press)	-	400	-
Cl 10(Galvanising Test)	-	500	-
Cl 12(Workmanship)	-	400	-
Cl 13(Weight)	-	400	-
Cl 14(Length, Width & Thickness)	-	900	-
Cl. 17(Marking )	-	200	-
Cl. 14 & Cl. 15(Pitch of corrugation (average of 4))	-	200	-
Cl. 14 & Cl. 15(Depth of corrugation (average of 4))	-	200	-
Cl. 14 & Cl. 15 (Cl. 14 & Cl 15 (Number of Corrugation))	-	200	-
Cl. 14 & Cl. 15 (Cl. 14 & Cl 15 (Difference between Diagonal))	-	200	-
Cl. 14 & Cl. 15 (Cl. 14 & Cl. 15 (Thickness))	-	400	-
Cl. 14 (Cl. 14 & Cl 15 (Width))	-	400	-
Cl. 14 (Cl. 14 & Cl 15 (Length))	-	400	-
Cl.12(Freedom from defects)	-	400	-
Cl. 8.1 (Cl. 8.1 (Percentage Elongation ))	-	1000	-
Cl. 8.1 (Cl. 8.1 (Yield Stress))	-	400	-
Cl. 8.1 (Cl. 8.1 (Tensile Strength))	-	1000	-
7.3(X-Ray fluorescence method)	-	400	-
7.6(Coating finish type)	-	400	-
7.7(Surface treatment)	-	200	-
8.3(Bend test miniral diameter)	-	500	-
Cl 8.1(UTM)	-	2000	-
Cl 8.1(UTM)	-	2000	-
Cl 8.1(UTM)	-	2000	-
Cl 8.2(Press)	-	400	-
Cl 8.2(Press)	-	400	-
Cl 8.2(Press)	-	400	-
Cl 12(Workmanship)	-	400	-
Cl 12(Workmanship)	-	400	-
Cl 13(Weight)	-	400	-
Cl 12(Workmanship)	-	400	-
Cl 13(Weight)	-	400	-
Cl 13(Weight)	-	400	-
Cl 14(Length, Width & Thickness)	-	900	-
Cl 14(Length, Width & Thickness)	-	900	-
Cl 14.1(Thickness of plain sheet ( average of 8))	-	900	-
Cl.15.1.3.1(Overall width after corrugation)	-	400	-
Cl.15.1.3.1(Overall width before corrugation)	-	400	-
6(Tensile Strength-IS:1608(P1))	-	1000	-
6(Yield Strength-IS:1608(P1))	-	400	-
6(Elongation-IS:1608(P1))	-	1000	-
Cl. 5.1(Carbon)	-	300	-
Cl. 5.1(Sulphur)	-	300	-
Cl. 5.1(Phosphorous)	-	300	-
Cl. 5.1(Manganese)	-	300	-
Cl. 5.1(Silicon)	-	300	-
Cl. 5.1(Titanium)	-	300	-
Cl. 5.1(Nitrogen)	-	300	-
Cl-5.1(Aluminium)	-	300	-
Cl. 5.1(Copper)	-	300	-
Cl. 5.1(Boron)	-	300	-
Cl. 5.1(Niobium)	-	300	-
Cl. 5.1(Vanadium)	-	300	-
Cl. 5.1(Ti+Nb+V+B)	-	300	-

04 Jun, 2028

-
-

10084

Bharat Test House Pvt Ltd 1474 Sonipat Haryana

9135626

IS/IEC 60669 : Part 2 : Sec 1 (2021)

Switches for household and Similar fixed electrical installations Part 2-1: particular requirements electronic control devices

Electronic Switches

75000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General requirements)	-	0	-
Cl-5(General remarks on tests)	-	0	-
Cl-6(Ratings)	-	0	-
Cl-7(Classification)	-	0	Qualitative
Cl-8(Marking)	-	0	Qualitative
Cl-9(Checking of dimensions)	-	500	5% discount for BIS
Cl-10(Protection against electrical shock)	-	1000	5% discount for BIS
10.101(Requirements for fuse replacement or adjustment of control setting)	-	1000	5% discount for BIS
10.102(Ventilation openings)	-	1000	5% discount for BIS
10.103(SELV, PELV or FELV circuits)	-	1000	5% discount for BIS
Cl-11(Provision for earthing)	-	1000	5% discount for BIS
11.101(Protective earthing continuity via printed circuit boards)	-	1000	5% discount for BIS
Cl-12(Terminals)	-	1000	5% discount for BIS
Cl-13(Constructional requirements)	-	2500	5% discount for BIS
Cl-14(Mechanism)	-	2500	5% discount for BIS
Cl-15(Resistance to ageing, protection provided by enclosures of switches and resistance to humidity)	-	5000	5% discount for BIS
Cl-16(Insulation resistance and electric strength)	-	2500	5% discount for BIS
Cl-17(Temperature rise)	-	2500	5% discount for BIS
Cl-18(Making and breaking capacity)	-	5000	5% discount for BIS
Cl-19(Normal operation)	-	1500	5% discount for BIS
Cl-20(Mechanical strength)	-	1500	5% discount for BIS
Cl-21(Resistance to heat)	-	2000	5% discount for BIS
Cl-22(Screws, current-carrying parts and connections)	-	1000	5% discount for BIS
Cl-23(Creepage distances, clearances and distances through sealing compound)	-	1000	5% discount for BIS
Cl-23.101(Use of enamel wires)	-	1000	5% discount for BIS
Cl-24(Resistance of insulating material to abnormal heat, to fire and to tracking)	-	2500	5% discount for BIS
Cl-25(Resistance to rusting)	-	2500	5% discount for BIS
26.2.2(Voltage dips and short interruptions)	-	37500	5% discount for BIS
26.2.3(Surge)	-	37500	5% discount for BIS
26.2.4(Fast transients (burst))	-	37500	5% discount for BIS
26.2.5(Electrostatic discharge)	-	37500	5% discount for BIS
26.2.6(Radiated electromagnetic field test)	-	37500	5% discount for BIS
26.2.7(Radio frequency voltage)	-	37500	5% discount for BIS
26.2.8(Power frequency magnetic field test)	-	37500	5% discount for BIS
26.3.1(Low-frequency emission)	-	37500	5% discount for BIS
26.3.2(Conducted radio-frequency emission on main, load/or control terminal)	-	37500	5% discount for BIS
26.3.3(Conducted radio frequency emission 0,15 MHz to 30 MHz on TP media and communications terminals)	-	37500	5% discount for BIS
26.3.4(Radiated radio frequency emission above 30 MHz)	-	37500	5% discount for BIS
Cl-101(Abnormal conditions)	-	2000	5% discount for BIS
Cl-102(Components)	-	0	-
Cl-103(Electromagnetic fields (EMF))	-	0	-
Cl-10.104(Protection from touch current)	-	1000	5% discount for BIS

19 Mar, 2029

-
-

10085

MICRO ENGINEERING AND TESTING LABORATORY OPC PRIVATE LIMITED, SONIPAT

9186006

IS 1489 (Part 1) (2015)

Portland pozzolana cement - Specification: Part 1 fly Ash Based

PORTLAND POZZOLANA CEMENT – FLY ASH BASED

11000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	800	-
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	800	-
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	400	-
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	600	-
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	600	-
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	600	-
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	800	-
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	800	-
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	400	-
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	600	-
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	600	-
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	600	-
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	800	-
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	800	-
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	400	-
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	600	-
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	600	-
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	600	-
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	800	-
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	800	-
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	400	-
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	600	-
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	600	-
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	600	-
7 -Table 2- vi(Drying Shrinkage- IS 4031 Part 10)	-	1300	-
7 -Table 2- v(Transverse Strength - IS 4031 Part 8 (Optional))	-	0	N/A
7 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	750	-
7 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	750	-
7 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	750	-
7 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	500	-
7 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	500	-
7 -Table 2- ii- b(Expansion after aeration- 4031 Part 3)	-	800	-
7 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	800	-
7 -Table 2- ii- a(Expansion after aeration - 4031 Part 3)	-	800	-
7 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	800	-
7 -Table 2- i(Fineness 4031 Part 2)	-	600	-
7 -Table 2- vi(Drying Shrinkage- IS 4031 Part 10)	-	1300	-
7 -Table 2- v(Transverse Strength - IS 4031 Part 8 (Optional))	-	0	N/A
7 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	750	-
7 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	750	-
7 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	750	-
7 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	500	-
7 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	500	-
7 -Table 2- ii- b(Expansion after aeration- 4031 Part 3)	-	800	-
7 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	800	-
7 -Table 2- ii- a(Expansion after aeration - 4031 Part 3)	-	800	-
7 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	500	-
Clause 7 Table 2 SI No. (v) (Compressive strength of Transverse Specimen, 672 ± 4 h)	-	0	N/A
Clause 7 Table 2 SI No. (v) (Compressive strength of Transverse Specimen, 168 ± 2 h)	-	0	N/A
Clause 7 Table 2 SI No. (v) (Compressive strength of Transverse Specimen, 72 ± 1 h)	-	0	N/A
Clause 7 Table 2 SI No. (v) (Transverse Strength, 672 ± 4 h)	-	0	N/A
Clause 7Table 2 SI No. (v)(Transverse Strength, 168 ± 2 h)	-	0	N/A
Clause 7Table 2 SI No. (v)(Transverse Strength, 72 ± 1 h)	-	0	N/A
7 -Table 2- i(Fineness 4031 Part 2)	-	600	-

04 Jun, 2028

-
-

10086

BIS, Central Laboratory (CL)

None

IS 17508 (2020)

Disposable Adult Incontinence Diaper - Specification

5600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause no.7.3 (Hygiene Testing Requirement, Total Viable Count)	-
Clause no.7.3.2 (Hygiene Testing Requirement, Staphylococcus Aureus)	-
Clause no.7.1 (pH Value)	-

-
-

10087

Testtex India Laboratories Private Limited, Noida

8138306

IS 3735 (1996)

Canvas Shoes, Rubber Sole

20900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4.5 Consolidation Test IS 3400 (Part 5) : 1986 (From the quarter, cut a strip of 25.0 ± 0.5 mm width along the leagth of the boot and of sufficient length to permit separation over a length of 75 mm. Carry out the test on two test pieces (one from each odd) at the rate of traverse of 100± 10mm per minute in accordance with IS 3400 (Part 5): 1986 or Static Dead Load Method as given in Annex C. The individual adhesion value for consolidation test shall not be less than 30N (3.0 kgf) for each of the teat piecea (see Note under 4.4).')	-	1000	-
4.1.1 Upper, Sl No. (i) of Table 1(The upper shall consist of over layer of cotton, manmade or blended conforming' to the requirements given in Sl No. (i) of Table 1 as an overlayer and cotton drill conforming to the requirements given in Sl No. (ii) of Table 1, as an inner layer or lining. The two fabrics shall be firmly adhered together with rubber compound. )	-	1500	Breaking Load Ends/dm, Picks/dm
Cl.4.1.1.1 Colour fastness(The dyed fabrics prescribed in 4.1.1 shall be fast todaylight and mechanical washing. Fastness to daylight shall be of rating 4 or better, when tested in accordance with IS 686 : 1985 or IS 2454: 1985. However in case of dispute the method prescribed in IS 686 : 1985 shall be considered as referee method.)	-	1000	-
Cl.4.1.2 Binding Material(IS 1954 : 1990) (IS1969 : 1985)(Cotton tape NEWAR used as binding material shall conform to the requirements prescribed in col 3 of Table 2, when tested in accordance with the methods referred to in col 4 of the table.)	-	200	-
Cl.4.1.2.1 Anmex B.(Cotton, manmade or blended shall be used as binding material.' 'Coloured cotton tapes shall have fastness to day light of rating as and if agreed to between the purchaser and the supplier when tested in accordance with IS 686 : 1985. The black tapes shall be free from sulphur dyes when tested in accordance with Annex B.')	-	1000	-
Cl.4.1.3.1( Sewing thread cotton, manmade or blended shall be used for stitching of upper. For cotton variety thread shall conform to variety No. 28 of IS 1720. Polyester variety thread shall conform to variety No. 9 of IS 9543. Any other suitable thread shall have breaking load not less than above referred requirement of specification. Sewing thread cotton, manmade or blended shall be used for binding of upper. For cotton variety thread shall conform to variety No. 32 of IS 1720. Polyester variety thread shall conform to variety No. 5 of IS 9543. Any other suitable thread shall have breaking load not less than above referred requirement of specification.')	-	900	Breaking Strength Length (m/kg)
Cl.4.1.3.2 (IS 2454 : 1985) IS 765 : 1979 IS 971 : 1966( The colour of the threads shall be as agreedto between the purchaser and the supplier. The dyed threads shall conform to the following requirements or IS 686 : 1985'.)	-	1600	Colour Fastness to Light Colour Fastness to Washing Colour Fastness to Perspiration
Cl.4.1.4(.Brass, steel or aluminium eyelets of 7.5 mm diameter and wall thickness 0.30 to 0.35 mm shall be used.')	-	400	-
Cl.4.1.5 Laces( The shoes shall be provided with fabric braided laces either matching the shade of the upper or black or The length of the lace shall be 60 ± 3 cm )	-	400	-
Cl.4.1.5 Laces(and shallhave the breaking strength of not less than 250 N when tested between 18 cm grips in accordance with IS 1969 : 1985, the rate of traverse of power actuated grip being 300 mm/min.)	-	500	-
Cl.4.1.5 Laces Annex B(In case the laces are black, the same shall pass the test for freedom from sulpher dyes when tested in accordance with Annex B. The two ends of the lace shall be provided with suitable metal or plastic tips.)	-	1000	-
Cl.4.1.6 Rubber Components(The rubber components shall conform to the requirements given in Table 4, when tested from finished boots.However in case it is not possible to cut the test pieces from the made up boots then 4.1.5.3 of IS 13695 : 1993 shall be followed.')	-	4500	Relative density Hardness, IRHD Flexing resistance Change in initial hardness after accelerated ageing for24 h at 100 ± 1°C Tensile strength Elongation at break Compression set
Cl.4.1.6.2 Ageing (None of the rubber components of the shoes shall show any sign of tackiness or crack developed after ageing, when examined visually)	-	1500	-
Cl.4.1.6.2 Ageing col 4 of Table 5.(The shoes shall be also aged at 70 ± 1°C for 168 h, on completion of which the test pieces taken from the shoes shall conform to the physical requirements prescribed in col 4 of Table 5. )	-	1500	-
Cl.4.1.6.3 Thickness of components in Table 6.(Individual components of the shoes shall comply with the thickness and material requirements prescribed in Table 6.)	-	1000	-
CL.4.2 Shape and Design IS 1638 : 1969(Cl 4.2.1 The shoes shall be made according to design and pattern as agreed to between the purchaser and the supplier. Size and fittings of the shoes shall be in accordance with IS 1638 : 1969 unless otherwise specified by the purchaser.)	-	200	-
Cl.4.2.2( The recommended design of canvas shoes is shown in Fig. 1.)	-	0	-
Cl.4.3 Construction Cl 4.3.1( The upper shall be stitched on a lock stitch machine and the number of stitches shall be 30 to 40 per dm.)	-	0	-
Cl.'4.3.2( Back of the upper shall be reinforced with a strip of upper material when there is a seam.')	-	0	-
Cl.4.3.3( The counter shall be stitched at the back, set from bottom of lining and bound flat on top edge with white/scoured binding material cut in bias and formed as a tape. T )	-	200	-
Cl.4.3.3(he number of stitches shall be 30 to 40 per decimetre. The counter binding shall meet the binding of the upper at the centre top edge of the heel.)	-	0	-
Cl.4.3.3(The edges of quarter shall be bound with dyed cotton binding material or matching to the colour of the upper, cut in bias and formed as a tape.)	-	0	-
Cl.4.3.4 (The vantp shall be strengthened with a rubber toe-cap (see Fig. 1).)	-	200	-
Cl.4.3.5( Five pairs of eyelets shall be fitted in each shoe. The eyelets shall be properly clenched without any distortion. It shall properly match the colour of the upper canvas, or as agreed to between the purchaser and the supplier.)	-	200	-
Cl.4.3.6( The shoes shall be free from folds, wrinkles in the upper, blisters, embedded foreign matters and excessive surface markings. In appearance, general workmanship, finish and all other respects, not defined in the standard, the shoes shall be similar to the sample approved by the purchaser, if any)	-	200	-
CL.4.3.7( The soles shall be of even substance and ofone layer only.)	-	200	-
Cl.4.3.8( A rubber foxing shall be fixed all round the sole and heel. The colour shall be as agreed to between the purchaser and the supplier. )	-	0	-
Cl.4.3.8(The foxing, not less than 18 mm wide, shall not extend beyond the edges of the sole at the bottom)	-	200	-
Cl.4.4 Adhesion Test(From the upper-foxing portion where it is adhered to the canvas, parallel to the waist of sole, cut a strip of length 100 mm and width 8 mm. Separate out the plies initially by breaking the bond to a length of about 75 mm. Carry out the test on two specimens in accordance with IS 3400 (Part 5) : 1986. There shall be no further separation within 1 minute at a load of 1 kg for each of the two specimens.)	-	1000	-
CL.4.6 Mass(The mass of one pair of finished shoes of size 8 shall not exceed 750 g with an increase or decrease of 25 g for each bigger or smaller size respectively)	-	500	-
Cl.4.5 Consolidation Test IS 3400 (Part 5) : 1986 (From the quarter, cut a strip of 25.0 ± 0.5 mm width along the leagth of the boot and of sufficient length to permit separation over a length of 75 mm. Carry out the test on two test pieces (one from each odd) at the rate of traverse of 100± 10mm per minute in accordance with IS 3400 (Part 5): 1986 or Static Dead Load Method as given in Annex C. The individual adhesion value for consolidation test shall not be less than 30N (3.0 kgf) for each of the teat piecea (see Note under 4.4).')	-	0	Clause Repeated
4.1.1 Upper, Sl No. (i) of Table 1(The upper shall consist of over layer of cotton, manmade or blended conforming' to the requirements given in Sl No. (i) of Table 1 as an overlayer and cotton drill conforming to the requirements given in Sl No. (ii) of Table 1, as an inner layer or lining. The two fabrics shall be firmly adhered together with rubber compound. )	-	0	Clause Repeated
Cl.4.1.1.1 Colour fastness(The dyed fabrics prescribed in 4.1.1 shall be fast todaylight and mechanical washing. Fastness to daylight shall be of rating 4 or better, when tested in accordance with IS 686 : 1985 or IS 2454: 1985. However in case of dispute the method prescribed in IS 686 : 1985 shall be considered as referee method.)	-	0	Clause Repeated
Cl.4.1.2 Binding Material(IS 1954 : 1990) (IS1969 : 1985)(Cotton tape NEWAR used as binding material shall conform to the requirements prescribed in col 3 of Table 2, when tested in accordance with the methods referred to in col 4 of the table.)	-	0	Clause Repeated
Cl.4.1.2.1 Anmex B.(Cotton, manmade or blended shall be used as binding material.' 'Coloured cotton tapes shall have fastness to day light of rating as and if agreed to between the purchaser and the supplier when tested in accordance with IS 686 : 1985. The black tapes shall be free from sulphur dyes when tested in accordance with Annex B.')	-	0	Clause Repeated
Cl.4.1.3.1( Sewing thread cotton, manmade or blended shall be used for stitching of upper. For cotton variety thread shall conform to variety No. 28 of IS 1720. Polyester variety thread shall conform to variety No. 9 of IS 9543. Any other suitable thread shall have breaking load not less than above referred requirement of specification. Sewing thread cotton, manmade or blended shall be used for binding of upper. For cotton variety thread shall conform to variety No. 32 of IS 1720. Polyester variety thread shall conform to variety No. 5 of IS 9543. Any other suitable thread shall have breaking load not less than above referred requirement of specification.')	-	0	Clause Repeated
Cl.4.1.3.2 (IS 2454 : 1985) IS 765 : 1979 IS 971 : 1966( The colour of the threads shall be as agreedto between the purchaser and the supplier. The dyed threads shall conform to the following requirements or IS 686 : 1985'.)	-	0	Clause Repeated
Cl.4.1.4(.Brass, steel or aluminium eyelets of 7.5 mm diameter and wall thickness 0.30 to 0.35 mm shall be used.')	-	0	Clause Repeated
Cl.4.1.5 Laces( The shoes shall be provided with fabric braided laces either matching the shade of the upper or black or The length of the lace shall be 60 ± 3 cm )	-	0	Clause Repeated
Cl.4.1.5 Laces(and shallhave the breaking strength of not less than 250 N when tested between 18 cm grips in accordance with IS 1969 : 1985, the rate of traverse of power actuated grip being 300 mm/min.)	-	0	Clause Repeated
Cl.4.1.5 Laces Annex B(In case the laces are black, the same shall pass the test for freedom from sulpher dyes when tested in accordance with Annex B. The two ends of the lace shall be provided with suitable metal or plastic tips.)	-	0	Clause Repeated
Cl.4.1.6 Rubber Components(The rubber components shall conform to the requirements given in Table 4, when tested from finished boots.However in case it is not possible to cut the test pieces from the made up boots then 4.1.5.3 of IS 13695 : 1993 shall be followed.')	-	0	Clause Repeated
Cl.4.1.6.2 Ageing col 4 of Table 5.(The shoes shall be also aged at 70 ± 1°C for 168 h, on completion of which the test pieces taken from the shoes shall conform to the physical requirements prescribed in col 4 of Table 5. )	-	0	Clause Repeated
Cl.4.1.6.2 Ageing (None of the rubber components of the shoes shall show any sign of tackiness or crack developed after ageing, when examined visually)	-	0	Clause Repeated
Cl.4.1.6.3 Thickness of components in Table 6.(Individual components of the shoes shall comply with the thickness and material requirements prescribed in Table 6.)	-	0	Clause Repeated
CL.4.2 Shape and Design IS 1638 : 1969(Cl 4.2.1 The shoes shall be made according to design and pattern as agreed to between the purchaser and the supplier. Size and fittings of the shoes shall be in accordance with IS 1638 : 1969 unless otherwise specified by the purchaser.)	-	0	Clause Repeated
Cl.4.2.2( The recommended design of canvas shoes is shown in Fig. 1.)	-	0	Clause Repeated
Cl.4.3 Construction Cl 4.3.1( The upper shall be stitched on a lock stitch machine and the number of stitches shall be 30 to 40 per dm.)	-	0	Clause Repeated
Cl.'4.3.2( Back of the upper shall be reinforced with a strip of upper material when there is a seam.')	-	0	Clause Repeated
Cl.4.3.3( The counter shall be stitched at the back, set from bottom of lining and bound flat on top edge with white/scoured binding material cut in bias and formed as a tape. T )	-	0	Clause Repeated
Cl.4.3.3(he number of stitches shall be 30 to 40 per decimetre. The counter binding shall meet the binding of the upper at the centre top edge of the heel.)	-	0	Clause Repeated
Cl.4.3.3(The edges of quarter shall be bound with dyed cotton binding material or matching to the colour of the upper, cut in bias and formed as a tape.)	-	0	Clause Repeated
Cl.4.3.4 (The vantp shall be strengthened with a rubber toe-cap (see Fig. 1).)	-	0	Clause Repeated
Cl.4.3.5( Five pairs of eyelets shall be fitted in each shoe. The eyelets shall be properly clenched without any distortion. It shall properly match the colour of the upper canvas, or as agreed to between the purchaser and the supplier.)	-	0	Clause Repeated
Cl.4.3.6( The shoes shall be free from folds, wrinkles in the upper, blisters, embedded foreign matters and excessive surface markings. In appearance, general workmanship, finish and all other respects, not defined in the standard, the shoes shall be similar to the sample approved by the purchaser, if any)	-	0	Clause Repeated
CL.4.3.7( The soles shall be of even substance and ofone layer only.)	-	0	Clause Repeated
Cl.4.3.8( A rubber foxing shall be fixed all round the sole and heel. The colour shall be as agreed to between the purchaser and the supplier. )	-	0	Clause Repeated
Cl.4.3.8(The foxing, not less than 18 mm wide, shall not extend beyond the edges of the sole at the bottom)	-	0	Clause Repeated
Cl.4.4 Adhesion Test(From the upper-foxing portion where it is adhered to the canvas, parallel to the waist of sole, cut a strip of length 100 mm and width 8 mm. Separate out the plies initially by breaking the bond to a length of about 75 mm. Carry out the test on two specimens in accordance with IS 3400 (Part 5) : 1986. There shall be no further separation within 1 minute at a load of 1 kg for each of the two specimens.)	-	0	Clause Repeated
CL.4.6 Mass(The mass of one pair of finished shoes of size 8 shall not exceed 750 g with an increase or decrease of 25 g for each bigger or smaller size respectively)	-	0	Clause Repeated
Cl.4.5 Consolidation Test IS 3400 (Part 5) : 1986 (From the quarter, cut a strip of 25.0 ± 0.5 mm width along the leagth of the boot and of sufficient length to permit separation over a length of 75 mm. Carry out the test on two test pieces (one from each odd) at the rate of traverse of 100± 10mm per minute in accordance with IS 3400 (Part 5): 1986 or Static Dead Load Method as given in Annex C. The individual adhesion value for consolidation test shall not be less than 30N (3.0 kgf) for each of the teat piecea (see Note under 4.4).')	-	0	Clause Repeated
4.1.1 Upper, Sl No. (i) of Table 1(The upper shall consist of over layer of cotton, manmade or blended conforming' to the requirements given in Sl No. (i) of Table 1 as an overlayer and cotton drill conforming to the requirements given in Sl No. (ii) of Table 1, as an inner layer or lining. The two fabrics shall be firmly adhered together with rubber compound. )	-	0	Clause Repeated
Cl.4.1.1.1 Colour fastness(The dyed fabrics prescribed in 4.1.1 shall be fast todaylight and mechanical washing. Fastness to daylight shall be of rating 4 or better, when tested in accordance with IS 686 : 1985 or IS 2454: 1985. However in case of dispute the method prescribed in IS 686 : 1985 shall be considered as referee method.)	-	0	Clause Repeated
Cl.4.1.2 Binding Material(IS 1954 : 1990) (IS1969 : 1985)(Cotton tape NEWAR used as binding material shall conform to the requirements prescribed in col 3 of Table 2, when tested in accordance with the methods referred to in col 4 of the table.)	-	0	Clause Repeated
Cl.4.1.2.1 Anmex B.(Cotton, manmade or blended shall be used as binding material.' 'Coloured cotton tapes shall have fastness to day light of rating as and if agreed to between the purchaser and the supplier when tested in accordance with IS 686 : 1985. The black tapes shall be free from sulphur dyes when tested in accordance with Annex B.')	-	0	Clause Repeated
Cl.4.1.3.1( Sewing thread cotton, manmade or blended shall be used for stitching of upper. For cotton variety thread shall conform to variety No. 28 of IS 1720. Polyester variety thread shall conform to variety No. 9 of IS 9543. Any other suitable thread shall have breaking load not less than above referred requirement of specification. Sewing thread cotton, manmade or blended shall be used for binding of upper. For cotton variety thread shall conform to variety No. 32 of IS 1720. Polyester variety thread shall conform to variety No. 5 of IS 9543. Any other suitable thread shall have breaking load not less than above referred requirement of specification.')	-	0	Clause Repeated
Cl.4.1.3.2 (IS 2454 : 1985) IS 765 : 1979 IS 971 : 1966( The colour of the threads shall be as agreedto between the purchaser and the supplier. The dyed threads shall conform to the following requirements or IS 686 : 1985'.)	-	0	Clause Repeated
Cl.4.1.4(.Brass, steel or aluminium eyelets of 7.5 mm diameter and wall thickness 0.30 to 0.35 mm shall be used.')	-	0	Clause Repeated
Cl.4.1.5 Laces( The shoes shall be provided with fabric braided laces either matching the shade of the upper or black or The length of the lace shall be 60 ± 3 cm )	-	0	Clause Repeated
Cl.4.1.5 Laces(and shallhave the breaking strength of not less than 250 N when tested between 18 cm grips in accordance with IS 1969 : 1985, the rate of traverse of power actuated grip being 300 mm/min.)	-	0	Clause Repeated
Cl.4.1.5 Laces Annex B(In case the laces are black, the same shall pass the test for freedom from sulpher dyes when tested in accordance with Annex B. The two ends of the lace shall be provided with suitable metal or plastic tips.)	-	0	Clause Repeated
Cl.4.1.6 Rubber Components(The rubber components shall conform to the requirements given in Table 4, when tested from finished boots.However in case it is not possible to cut the test pieces from the made up boots then 4.1.5.3 of IS 13695 : 1993 shall be followed.')	-	0	Clause Repeated
Cl.4.1.6.2 Ageing col 4 of Table 5.(The shoes shall be also aged at 70 ± 1°C for 168 h, on completion of which the test pieces taken from the shoes shall conform to the physical requirements prescribed in col 4 of Table 5. )	-	0	Clause Repeated
Cl.4.1.6.2 Ageing (None of the rubber components of the shoes shall show any sign of tackiness or crack developed after ageing, when examined visually)	-	0	Clause Repeated
Cl.4.1.6.3 Thickness of components in Table 6.(Individual components of the shoes shall comply with the thickness and material requirements prescribed in Table 6.)	-	0	Clause Repeated
CL.4.2 Shape and Design IS 1638 : 1969(Cl 4.2.1 The shoes shall be made according to design and pattern as agreed to between the purchaser and the supplier. Size and fittings of the shoes shall be in accordance with IS 1638 : 1969 unless otherwise specified by the purchaser.)	-	0	Clause Repeated
Cl.4.2.2( The recommended design of canvas shoes is shown in Fig. 1.)	-	0	Clause Repeated
Cl.4.3 Construction Cl 4.3.1( The upper shall be stitched on a lock stitch machine and the number of stitches shall be 30 to 40 per dm.)	-	0	Clause Repeated
Cl.'4.3.2( Back of the upper shall be reinforced with a strip of upper material when there is a seam.')	-	0	Clause Repeated
Cl.4.3.3( The counter shall be stitched at the back, set from bottom of lining and bound flat on top edge with white/scoured binding material cut in bias and formed as a tape. T )	-	0	Clause Repeated
Cl.4.3.3(he number of stitches shall be 30 to 40 per decimetre. The counter binding shall meet the binding of the upper at the centre top edge of the heel.)	-	0	Clause Repeated
Cl.4.3.3(The edges of quarter shall be bound with dyed cotton binding material or matching to the colour of the upper, cut in bias and formed as a tape.)	-	0	Clause Repeated
Cl.4.3.4 (The vantp shall be strengthened with a rubber toe-cap (see Fig. 1).)	-	0	Clause Repeated
Cl.4.3.5( Five pairs of eyelets shall be fitted in each shoe. The eyelets shall be properly clenched without any distortion. It shall properly match the colour of the upper canvas, or as agreed to between the purchaser and the supplier.)	-	0	Clause Repeated
Cl.4.3.6( The shoes shall be free from folds, wrinkles in the upper, blisters, embedded foreign matters and excessive surface markings. In appearance, general workmanship, finish and all other respects, not defined in the standard, the shoes shall be similar to the sample approved by the purchaser, if any)	-	0	Clause Repeated
CL.4.3.7( The soles shall be of even substance and ofone layer only.)	-	0	Clause Repeated
Cl.4.3.8( A rubber foxing shall be fixed all round the sole and heel. The colour shall be as agreed to between the purchaser and the supplier. )	-	0	Clause Repeated
Cl.4.3.8(The foxing, not less than 18 mm wide, shall not extend beyond the edges of the sole at the bottom)	-	0	Clause Repeated
Cl.4.4 Adhesion Test(From the upper-foxing portion where it is adhered to the canvas, parallel to the waist of sole, cut a strip of length 100 mm and width 8 mm. Separate out the plies initially by breaking the bond to a length of about 75 mm. Carry out the test on two specimens in accordance with IS 3400 (Part 5) : 1986. There shall be no further separation within 1 minute at a load of 1 kg for each of the two specimens.)	-	0	Clause Repeated
CL.4.6 Mass(The mass of one pair of finished shoes of size 8 shall not exceed 750 g with an increase or decrease of 25 g for each bigger or smaller size respectively)	-	0	Clause Repeated
4.8(Adhesion )	-	0	Clause Repeated
4.7(Consolidation test )	-	0	Clause Repeated
4.6(Mass )	-	0	Clause Repeated
4.5(Finish )	-	0	-
4.4(Contruction )	-	0	Clause Repeated
4.3(Leg Height )	-	0	Test parameter not available in the specification0
4.2(Design )	-	0	Clause Repeated
4.1.6.2(Thickness of components )	-	0	Clause Repeated
4.1.6.2(Ageing)	-	0	Clause Repeated
4.1.6.2(Elongation at break after ageing )	-	0	Clause Repeated
4.1.6.2(Tensile after ageing )	-	0	Clause Repeated
4.1.6(Compression set )	-	0	Clause Repeated
4.1.6(Elongation at break )	-	0	Clause Repeated
4.1.6(Tensile strength)	-	0	Clause Repeated
4.1.6(Hardness (after accelerated ))	-	0	Clause Repeated
4.1.6(Flexing resistance test)	-	0	Clause Repeated
4.1.6(Hardness )	-	0	Clause Repeated
4.1.6(Relative density)	-	0	Clause Repeated
4.1.5(Sulpher dyes content )	-	0	Clause Repeated
4.1.5(Breaking Load )	-	0	Clause Repeated
4.1.5(Length )	-	0	Clause Repeated
4.1.4(Thickness)	-	0	Clause Repeated
4.1.3(Color fastness to perspiration)	-	0	Clause Repeated
4.1.3(Colorfastness to washing)	-	0	Clause Repeated
4.1.3(Colorfastness to light )	-	0	Clause Repeated
4.1.3(Single thread breaking load)	-	0	Clause Repeated
4.1.3(Construction )	-	0	Clause Repeated
4.1.2(Colorfastness to light )	-	0	Clause Repeated
4.1.2(Colorfastness to washing)	-	0	Clause Repeated
4.1.2(Breaking Strength )	-	0	Clause Repeated
4.1.2(Width )	-	0	Clause Repeated
4.1.1.2(Colorfastness to washing)	-	0	Clause Repeated
4.1.1.1(Colorfastness to light )	-	0	Clause Repeated
4.1.1 (Drill) (End & Picks/dm)	-	0	Clause Repeated
4.1.1 (Drill) (Colorfastness to light )	-	0	Clause Repeated
4.1.1 (canvas )(End & Picks/dm)	-	0	Clause Repeated
4.1.1 (canvas )(Breaking Load )	-	0	Clause Repeated
5, 5.1, Cl. 5.2, Cl. 5.2.1, Cl. 5.2.1.1(Packing and marking)	-	0	-
" CL. 5.1, Cl. 5.2, Cl. 5.2.1, Cl. 5.2.1.1(Packing and marking ")	-	0	Clause Repeated
4.1.4(Size )	-	0	Clause Repeated

-
Included w.e.f. 03.10.2024

10088

Testtex India Laboratories Private Limited, Noida

8138306

IS 5557 : Part 2 (2018)

All rubber gum boots and ankle boots: Part 2 occupational purposes

All rubber gum boots and ankle boots:

20625 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(CLASSIFICATION)	-	0	-
3.2(compact insole)	-	500	-
3.3(compact insole)	-	500	-
3.4(compact Outsole/heel)	-	500	-
3.5(Description lining material)	-	0	-
3.6(description occupatioanl footwear)	-	0	-
3.7(Ruber material)	-	0	-
4(Type & varity)	-	0	-
5(Design)	-	0	-
6(size & fitting)	-	200	-
7.1(lining material)	-	0	-
7.1.1(Tear strength)	-	500	-
7.1.2(Abrasion resistance)	-	1000	-
7.2(Coated bindind material)	-	1300	Width, Breaking Strength
7.3(Thread for upper closing)	-	1000	Length (Meter/Kg) Breaking Strength
7.3(Thread for upper closing - sulphur test)	-	1000	-
7.4(Use of rubber)	-	0	-
7.4.1(Physical requirement of rubber component)	-	2000	Hardness Accelerated Aging + Hardness
7.5(observation of Upper)	-	0	-
7.5.1(Tensile)	-	1000	-
7.5.2(Thickness)	-	300	-
7.5.3(Flexing Resistance)	-	1000	-
7.6(Outsole/Heel)	-	0	-
7.6.1(Out sole thickness)	-	300	-
7.6.2(out sole tear strength)	-	1000	-
7.6.3(out sole abrasion)	-	1000	-
7.6.4(out sole flexing)	-	1000	-
7.6.5(Interlayer bond strength)	-	1000	-
7.7(INSOCK Visual)	-	0	-
7.7.1(Insock thickness)	-	300	-
7.7.2(Insock abrasion)	-	1000	-
8(CONSTRUCTION)	-	0	-
8.1(Hot contact)	-	1000	-
8.2(Leak proofness)	-	1000	-
8.3(Height of upper)	-	300	-
8.4(Adhesion test)	-	500	-
8.5(Resistance to acid & alkaline)	-	1000	-
8.6(Resistance to fule oil)	-	1000	-
8.7.1(Antistatic)	-	2000	-
8.7.2(CONDUCTIVE FOOTWEAR)	-	2000	-
8.7.4(Resistance to cold)	-	2000	-
10(Finish of boots)	-	0	-
11.1(Marking)	-	0	-
11.2(Marking)	-	0	-
11.3(Marking)	-	0	-

-
Included w.e.f. 03.10.2024 Exclusion: For all types of boots except electrically insulated boots, Cl.9.1 (Allergenic disperse dyes), Cl.9.2 (carcinogenic disperse dyes)

10089

JBS TESTING SOLUTIONS (Unit-2) (24), Jalandhar

9172306

IS 2553 : Part 1 (2018)

Safety glass - Specification: Part 1 architectural, building and general uses (Fourth Revision)

23750 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Types)	-	5100	Rs.147,000/- without optional test, Rs.210,000/-with optional test Toughened safety glass:Rs. 23,750/-(for mandatory tests only),Toughened safety glass: Rs. 54,500/-(for all tests), Laminated safety glass Rs. 43,500/-(for mandatory tests only),Lam
5.1.1(General)	-	6000	Rs.147,000/- without optional test, Rs.210,000/-with optional test Toughened safety glass:Rs. 23,750/-(for mandatory tests only),Toughened safety glass: Rs. 54,500/-(for all tests), Laminated safety glass Rs. 43,500/-(for mandatory tests only),Lam
5.1.2(Optical Faults-IS 14900)	-	1500	Rs.147,000/- without optional test, Rs.210,000/-with optional test Toughened safety glass:Rs. 23,750/-(for mandatory tests only),Toughened safety glass: Rs. 54,500/-(for all tests), Laminated safety glass Rs. 43,500/-(for mandatory tests only),Lam
5.1.2(Spot Faults of category A/B/C/D -IS 14900)	-	1500	Rs.147,000/- without optional test, Rs.210,000/-with optional test Toughened safety glass:Rs. 23,750/-(for mandatory tests only),Toughened safety glass: Rs. 54,500/-(for all tests), Laminated safety glass Rs. 43,500/-(for mandatory tests only),Lam
5.1.2(Reams, Strings and Lines-IS 14900)	-	1500	Rs.147,000/- without optional test, Rs.210,000/-with optional test Toughened safety glass:Rs. 23,750/-(for mandatory tests only),Toughened safety glass: Rs. 54,500/-(for all tests), Laminated safety glass Rs. 43,500/-(for mandatory tests only),Lam
5.1.2(Linear / Extended Faults -IS 14900)	-	1500	Rs.147,000/- without optional test, Rs.210,000/-with optional test Toughened safety glass:Rs. 23,750/-(for mandatory tests only),Toughened safety glass: Rs. 54,500/-(for all tests), Laminated safety glass Rs. 43,500/-(for mandatory tests only),Lam
5.2.1 (Thickness -IS 17004 & IS 14900)	-	1025	Rs.147,000/- without optional test, Rs.210,000/-with optional test Toughened safety glass:Rs. 23,750/-(for mandatory tests only),Toughened safety glass: Rs. 54,500/-(for all tests), Laminated safety glass Rs. 43,500/-(for mandatory tests only),Lam
5.2.2.1( Dimensions- Width )	-	1000	Rs.147,000/- without optional test, Rs.210,000/-with optional test Toughened safety glass:Rs. 23,750/-(for mandatory tests only),Toughened safety glass: Rs. 54,500/-(for all tests), Laminated safety glass Rs. 43,500/-(for mandatory tests only),Lam
5.2.2.1( Dimensions- Length)	-	1000	Rs.147,000/- without optional test, Rs.210,000/-with optional test Toughened safety glass:Rs. 23,750/-(for mandatory tests only),Toughened safety glass: Rs. 54,500/-(for all tests), Laminated safety glass Rs. 43,500/-(for mandatory tests only),Lam
5.2.2.2( Squareness)	-	1000	Rs.147,000/- without optional test, Rs.210,000/-with optional test Toughened safety glass:Rs. 23,750/-(for mandatory tests only),Toughened safety glass: Rs. 54,500/-(for all tests), Laminated safety glass Rs. 43,500/-(for mandatory tests only),Lam
5.2.3 (Fragmentation Test- IS 17004)	-	10900	Rs.147,000/- without optional test, Rs.210,000/-with optional test Toughened safety glass:Rs. 23,750/-(for mandatory tests only),Toughened safety glass: Rs. 54,500/-(for all tests), Laminated safety glass Rs. 43,500/-(for mandatory tests only),Lam
5.2.4-a( Flatness-Overall bow-IS 17004)	-	1075	Rs.147,000/- without optional test, Rs.210,000/-with optional test Toughened safety glass:Rs. 23,750/-(for mandatory tests only),Toughened safety glass: Rs. 54,500/-(for all tests), Laminated safety glass Rs. 43,500/-(for mandatory tests only),Lam
5.2.4-b( Flatness-Roller wave distortion-IS 17005)	-	1075	Rs.147,000/- without optional test, Rs.210,000/-with optional test Toughened safety glass:Rs. 23,750/-(for mandatory tests only),Toughened safety glass: Rs. 54,500/-(for all tests), Laminated safety glass Rs. 43,500/-(for mandatory tests only),Lam
5.2.4-c( Flatness-Edge lift-IS 17006)	-	1075	Rs.147,000/- without optional test, Rs.210,000/-with optional test Toughened safety glass:Rs. 23,750/-(for mandatory tests only),Toughened safety glass: Rs. 54,500/-(for all tests), Laminated safety glass Rs. 43,500/-(for mandatory tests only),Lam
5.2.4-d( Flatness-Local distortion-IS 17007)	-	1075	Rs.147,000/- without optional test, Rs.210,000/-with optional test Toughened safety glass:Rs. 23,750/-(for mandatory tests only),Toughened safety glass: Rs. 54,500/-(for all tests), Laminated safety glass Rs. 43,500/-(for mandatory tests only),Lam
5.2.4.1 (Other distortions)	-	1000	Rs.147,000/- without optional test, Rs.210,000/-with optional test Toughened safety glass:Rs. 23,750/-(for mandatory tests only),Toughened safety glass: Rs. 54,500/-(for all tests), Laminated safety glass Rs. 43,500/-(for mandatory tests only),Lam
5.2.5.1( Resistance to shock- IS 17004)	-	33200	Rs.147,000/- without optional test, Rs.210,000/-with optional test Toughened safety glass:Rs. 23,750/-(for mandatory tests only),Toughened safety glass: Rs. 54,500/-(for all tests), Laminated safety glass Rs. 43,500/-(for mandatory tests only),Lam
5.2.5.2( Resistance to human impact- IS 17004)	-	18400	Rs.147,000/- without optional test, Rs.210,000/-with optional test Toughened safety glass:Rs. 23,750/-(for mandatory tests only),Toughened safety glass: Rs. 54,500/-(for all tests), Laminated safety glass Rs. 43,500/-(for mandatory tests only),Lam
5.2.6( Surface Compression (Optional)- IS 17004)	-	8100	Rs.147,000/- without optional test, Rs.210,000/-with optional test Toughened safety glass:Rs. 23,750/-(for mandatory tests only),Toughened safety glass: Rs. 54,500/-(for all tests), Laminated safety glass Rs. 43,500/-(for mandatory tests only),Lam
5.2.7( Mechanical Strength — Four Point Bending Test (Optional)- IS 17004)	-	20500	Rs.147,000/- without optional test, Rs.210,000/-with optional test Toughened safety glass:Rs. 23,750/-(for mandatory tests only),Toughened safety glass: Rs. 54,500/-(for all tests), Laminated safety glass Rs. 43,500/-(for mandatory tests only),Lam
5.2.8.1 & 5.2.8.3-Table 7(Diameter of Holes & Deviations on holes )	-	5350	Rs.147,000/- without optional test, Rs.210,000/-with optional test Toughened safety glass:Rs. 23,750/-(for mandatory tests only),Toughened safety glass: Rs. 54,500/-(for all tests), Laminated safety glass Rs. 43,500/-(for mandatory tests only),Lam
5.2.8.3-Table 8(Deviations on position of holes and Cutouts Location)	-	5350	Rs.147,000/- without optional test, Rs.210,000/-with optional test Toughened safety glass:Rs. 23,750/-(for mandatory tests only),Toughened safety glass: Rs. 54,500/-(for all tests), Laminated safety glass Rs. 43,500/-(for mandatory tests only),Lam
5.3.1 (Thickness-IS 17004 & IS 14900)	-	2100	Rs.147,000/- without optional test, Rs.210,000/-with optional test Toughened safety glass:Rs. 23,750/-(for mandatory tests only),Toughened safety glass: Rs. 54,500/-(for all tests), Laminated safety glass Rs. 43,500/-(for mandatory tests only),Lam
5.3.2.1( Dimensions and squareness- Width )	-	1067	Rs.147,000/- without optional test, Rs.210,000/-with optional test Toughened safety glass:Rs. 23,750/-(for mandatory tests only),Toughened safety glass: Rs. 54,500/-(for all tests), Laminated safety glass Rs. 43,500/-(for mandatory tests only),Lam
5.3.2.1( Dimensions and squareness- Length)	-	1067	Rs.147,000/- without optional test, Rs.210,000/-with optional test Toughened safety glass:Rs. 23,750/-(for mandatory tests only),Toughened safety glass: Rs. 54,500/-(for all tests), Laminated safety glass Rs. 43,500/-(for mandatory tests only),Lam
5.3.2.1( Dimensions and squareness-Squareness)	-	1067	Rs.147,000/- without optional test, Rs.210,000/-with optional test Toughened safety glass:Rs. 23,750/-(for mandatory tests only),Toughened safety glass: Rs. 54,500/-(for all tests), Laminated safety glass Rs. 43,500/-(for mandatory tests only),Lam
5.3.2.2 (Edge displacement)	-	2500	Rs.147,000/- without optional test, Rs.210,000/-with optional test Toughened safety glass:Rs. 23,750/-(for mandatory tests only),Toughened safety glass: Rs. 54,500/-(for all tests), Laminated safety glass Rs. 43,500/-(for mandatory tests only),Lam
5.3.3( Light Stability Test-IS 17004)	-	9600	Rs.147,000/- without optional test, Rs.210,000/-with optional test Toughened safety glass:Rs. 23,750/-(for mandatory tests only),Toughened safety glass: Rs. 54,500/-(for all tests), Laminated safety glass Rs. 43,500/-(for mandatory tests only),Lam
5.3.3( Light Stability Test-IS 17004)	-	9600	Rs.147,000/- without optional test, Rs.210,000/-with optional test Toughened safety glass:Rs. 23,750/-(for mandatory tests only),Toughened safety glass: Rs. 54,500/-(for all tests), Laminated safety glass Rs. 43,500/-(for mandatory tests only),Lam
5.3.4( Boil and Bake Tests-IS 17004)	-	5700	Rs.147,000/- without optional test, Rs.210,000/-with optional test Toughened safety glass:Rs. 23,750/-(for mandatory tests only),Toughened safety glass: Rs. 54,500/-(for all tests), Laminated safety glass Rs. 43,500/-(for mandatory tests only),Lam
5.3.5( Fracture and Adhesion Test-IS 17004)	-	3500	Rs.147,000/- without optional test, Rs.210,000/-with optional test Toughened safety glass:Rs. 23,750/-(for mandatory tests only),Toughened safety glass: Rs. 54,500/-(for all tests), Laminated safety glass Rs. 43,500/-(for mandatory tests only),Lam
5.3.6.1( Spot defects in the central area)	-	580	Rs.147,000/- without optional test, Rs.210,000/-with optional test Toughened safety glass:Rs. 23,750/-(for mandatory tests only),Toughened safety glass: Rs. 54,500/-(for all tests), Laminated safety glass Rs. 43,500/-(for mandatory tests only),Lam
5.3.6.2 (Linear defects in the central area)	-	580	Rs.147,000/- without optional test, Rs.210,000/-with optional test Toughened safety glass:Rs. 23,750/-(for mandatory tests only),Toughened safety glass: Rs. 54,500/-(for all tests), Laminated safety glass Rs. 43,500/-(for mandatory tests only),Lam
5.3.6.3( Defects in the outer area for framed edges)	-	580	Rs.147,000/- without optional test, Rs.210,000/-with optional test Toughened safety glass:Rs. 23,750/-(for mandatory tests only),Toughened safety glass: Rs. 54,500/-(for all tests), Laminated safety glass Rs. 43,500/-(for mandatory tests only),Lam
5.3.6.4( Vents)	-	580	Rs.147,000/- without optional test, Rs.210,000/-with optional test Toughened safety glass:Rs. 23,750/-(for mandatory tests only),Toughened safety glass: Rs. 54,500/-(for all tests), Laminated safety glass Rs. 43,500/-(for mandatory tests only),Lam
5.3.6.5( Creases and streaks)	-	580	Rs.147,000/- without optional test, Rs.210,000/-with optional test Toughened safety glass:Rs. 23,750/-(for mandatory tests only),Toughened safety glass: Rs. 54,500/-(for all tests), Laminated safety glass Rs. 43,500/-(for mandatory tests only),Lam
5.3.6.6( Defects on edge which will not be framed)	-	580	Rs.147,000/- without optional test, Rs.210,000/-with optional test Toughened safety glass:Rs. 23,750/-(for mandatory tests only),Toughened safety glass: Rs. 54,500/-(for all tests), Laminated safety glass Rs. 43,500/-(for mandatory tests only),Lam
5.3.7( Humidity Test – Optional)	-	51400	Rs.147,000/- without optional test, Rs.210,000/-with optional test Toughened safety glass:Rs. 23,750/-(for mandatory tests only),Toughened safety glass: Rs. 54,500/-(for all tests), Laminated safety glass Rs. 43,500/-(for mandatory tests only),Lam
5.3.8( Resistance to Human Impact Test)	-	18400	Rs.147,000/- without optional test, Rs.210,000/-with optional test Toughened safety glass:Rs. 23,750/-(for mandatory tests only),Toughened safety glass: Rs. 54,500/-(for all tests), Laminated safety glass Rs. 43,500/-(for mandatory tests only),Lam
4(Types)	-	0	-
5.1.1(General)	-	0	-
5.1.2(Optical Faults-IS 14900)	-	0	-
5.1.2(Spot Faults of category A/B/C/D -IS 14900)	-	0	-
5.1.2(Reams, Strings and Lines-IS 14900)	-	0	-
5.1.2(Linear / Extended Faults -IS 14900)	-	0	-
5.2.1 (Thickness -IS 17004 & IS 14900)	-	0	-
5.2.2.1( Dimensions- Width )	-	0	-
5.2.2.1( Dimensions- Length)	-	0	-
5.2.2.2( Squareness)	-	0	-
5.2.3 (Fragmentation Test- IS 17004)	-	0	-
5.2.4-a( Flatness-Overall bow-IS 17004)	-	0	-
5.2.4-b( Flatness-Roller wave distortion-IS 17005)	-	0	-
5.2.4-c( Flatness-Edge lift-IS 17006)	-	0	-
5.2.4-d( Flatness-Local distortion-IS 17007)	-	0	-
5.2.4.1 (Other distortions)	-	0	-
5.2.5.1( Resistance to shock- IS 17004)	-	0	-
5.2.5.2( Resistance to human impact- IS 17004)	-	0	-
5.2.6( Surface Compression (Optional)- IS 17004)	-	0	-
5.2.7( Mechanical Strength — Four Point Bending Test (Optional)- IS 17004)	-	0	-
5.2.8.1 & 5.2.8.3-Table 7(Diameter of Holes & Deviations on holes )	-	0	-
5.2.8.3-Table 8(Deviations on position of holes and Cutouts Location)	-	0	-
5.3.1 (Thickness-IS 17004 & IS 14900)	-	0	-
5.3.2.1( Dimensions and squareness- Width )	-	0	-
5.3.2.1( Dimensions and squareness- Length)	-	0	-
5.3.2.1( Dimensions and squareness-Squareness)	-	0	-
5.3.2.2 (Edge displacement)	-	0	-
5.3.3( Light Stability Test-IS 17004)	-	0	-
5.3.3( Light Stability Test-IS 17004)	-	0	-
5.3.4( Boil and Bake Tests-IS 17004)	-	0	-
5.3.5( Fracture and Adhesion Test-IS 17004)	-	0	-
5.3.6.1( Spot defects in the central area)	-	0	-
5.3.6.2 (Linear defects in the central area)	-	0	-
5.3.6.3( Defects in the outer area for framed edges)	-	0	-
5.3.6.4( Vents)	-	0	-
5.3.6.5( Creases and streaks)	-	0	-
5.3.6.6( Defects on edge which will not be framed)	-	0	-
5.3.7( Humidity Test – Optional)	-	0	-
5.3.8( Resistance to Human Impact Test)	-	0	-
5.2.1(Thickness)	-	0	-
5.2.2(Dimension and Squarenes)	-	0	-
5.2.4(Overall Bow)	-	0	-
5.2.4(Measurement of wave and roller wave)	-	0	-
5.2.4(Edge lift)	-	0	-
5.2.4(Local distortion)	-	0	-
5.2.3(Fragmentation test)	-	0	-
5.2.7(Four point bending)	-	0	-
5.2.6(Surface compression)	-	0	-
5.2.5.1(Resistance to shock)	-	0	-
5.2.5.2(Resistance to human impact)	-	0	-
5.3.1(Thickness test)	-	0	-
5.3.2.1(Dimension and Squarenes test)	-	0	-
5.3.6(Defects in central area test)	-	0	-
5.3.6.7(Defects in central area test)	-	0	-
5.3.5(Fracture and adhesion)	-	0	-
5.3.8(Resistance to human impact)	-	0	-
5.3.4(Boil test)	-	0	-
5.3.4(Bake test)	-	0	-
5.3.7(Humidity test with condensation)	-	0	-
5.3.7(Humidity test without condensation)	-	0	-
5.3.3(Light stability test)	-	0	-
5.3.2.2(Edge displacement test)	-	0	-
5.2.2(5.2.2 Dimension and Squarenes test)	-	0	-
5.2.4(measurement of wave and roller wave)	-	0	-
5.2.8(Fabrication in Glass)	-	0	-
Cl. No. 5.2.2.3.1, Table No. 1A(Shape accuracy, girth and length)	-	0	-
Cl. No. 5.2.2.3.2(Edge straightness deviation)	-	0	-
Cl. No. 5.2.2.3.3(Maximum cross-curve deviation)	-	0	-
4(Types)	-	0	-
5.1.1(General)	-	0	-
5.1.2(Optical Faults-IS 14900)	-	0	-
5.1.2(Spot Faults of category A/B/C/D -IS 14900)	-	0	-
5.1.2(Reams, Strings and Lines-IS 14900)	-	0	-
5.1.2(Linear / Extended Faults -IS 14900)	-	0	-
5.2.1 (Thickness -IS 17004 & IS 14900)	-	0	-
5.2.2.1( Dimensions- Width )	-	0	-
5.2.2.1( Dimensions- Length)	-	0	-
5.2.2.2( Squareness)	-	0	-
5.2.3 (Fragmentation Test- IS 17004)	-	0	-
5.2.4-a( Flatness-Overall bow-IS 17004)	-	0	-
5.2.4-b( Flatness-Roller wave distortion-IS 17005)	-	0	-
5.2.4-c( Flatness-Edge lift-IS 17006)	-	0	-
5.2.4-d( Flatness-Local distortion-IS 17007)	-	0	-
5.2.4.1 (Other distortions)	-	0	-
5.2.5.1( Resistance to shock- IS 17004)	-	0	-
5.2.5.2( Resistance to human impact- IS 17004)	-	0	-
5.2.6( Surface Compression (Optional)- IS 17004)	-	0	-
5.2.7( Mechanical Strength — Four Point Bending Test (Optional)- IS 17004)	-	0	-
5.2.8.1 & 5.2.8.3-Table 7(Diameter of Holes & Deviations on holes )	-	0	-
5.2.8.3-Table 8(Deviations on position of holes and Cutouts Location)	-	0	-
5.3.1 (Thickness-IS 17004 & IS 14900)	-	0	-
5.3.2.1( Dimensions and squareness- Width )	-	0	-
5.3.2.1( Dimensions and squareness- Length)	-	0	-
5.3.2.1( Dimensions and squareness-Squareness)	-	0	-
5.3.2.2 (Edge displacement)	-	0	-
5.3.3( Light Stability Test-IS 17004)	-	0	-
5.3.3( Light Stability Test-IS 17004)	-	0	-
5.3.4( Boil and Bake Tests-IS 17004)	-	0	-
5.3.5( Fracture and Adhesion Test-IS 17004)	-	0	-
5.3.6.1( Spot defects in the central area)	-	0	-
5.3.6.2 (Linear defects in the central area)	-	0	-
5.3.6.3( Defects in the outer area for framed edges)	-	0	-
5.3.6.4( Vents)	-	0	-
5.3.6.5( Creases and streaks)	-	0	-
5.3.6.6( Defects on edge which will not be framed)	-	0	-
5.3.7( Humidity Test – Optional)	-	0	-
5.3.8( Resistance to Human Impact Test)	-	0	-
4(Types)	-	0	-
5.1.1(General)	-	0	-
5.1.2(Optical Faults-IS 14900)	-	0	-
5.1.2(Spot Faults of category A/B/C/D -IS 14900)	-	0	-
5.1.2(Reams, Strings and Lines-IS 14900)	-	0	-
5.1.2(Linear / Extended Faults -IS 14900)	-	0	-
5.2.1 (Thickness -IS 17004 & IS 14900)	-	0	-
5.2.2.1( Dimensions- Width )	-	0	-
5.2.2.1( Dimensions- Length)	-	0	-
5.2.2.2( Squareness)	-	0	-
5.2.3 (Fragmentation Test- IS 17004)	-	0	-
5.2.4-a( Flatness-Overall bow-IS 17004)	-	0	-
5.2.4-b( Flatness-Roller wave distortion-IS 17005)	-	0	-
5.2.4-c( Flatness-Edge lift-IS 17006)	-	0	-
5.2.4-d( Flatness-Local distortion-IS 17007)	-	0	-
5.2.4.1 (Other distortions)	-	0	-
5.2.5.1( Resistance to shock- IS 17004)	-	0	-
5.2.5.2( Resistance to human impact- IS 17004)	-	0	-
5.2.6( Surface Compression (Optional)- IS 17004)	-	0	-
5.2.7( Mechanical Strength — Four Point Bending Test (Optional)- IS 17004)	-	0	-
5.2.8.1 & 5.2.8.3-Table 7(Diameter of Holes & Deviations on holes )	-	0	-
5.2.8.3-Table 8(Deviations on position of holes and Cutouts Location)	-	0	-
5.3.1 (Thickness-IS 17004 & IS 14900)	-	0	-
5.3.2.1( Dimensions and squareness- Width )	-	0	-
5.3.2.1( Dimensions and squareness- Length)	-	0	-
5.3.2.1( Dimensions and squareness-Squareness)	-	0	-
5.3.2.2 (Edge displacement)	-	0	-
5.3.3( Light Stability Test-IS 17004)	-	0	-
5.3.3( Light Stability Test-IS 17004)	-	0	-
5.3.4( Boil and Bake Tests-IS 17004)	-	0	-
5.3.5( Fracture and Adhesion Test-IS 17004)	-	0	-
5.3.6.1( Spot defects in the central area)	-	0	-
5.3.6.2 (Linear defects in the central area)	-	0	-
5.3.6.3( Defects in the outer area for framed edges)	-	0	-
5.3.6.4( Vents)	-	0	-
5.3.6.5( Creases and streaks)	-	0	-
5.3.6.6( Defects on edge which will not be framed)	-	0	-
5.3.7( Humidity Test – Optional)	-	0	-
5.3.8( Resistance to Human Impact Test)	-	0	-
5.2.1(Thickness)	-	0	-
5.2.2(Dimension and Squarenes)	-	0	-
5.2.4(Overall Bow)	-	0	-
5.2.4(Measurement of wave and roller wave)	-	0	-
5.2.4(Edge lift)	-	0	-
5.2.4(Local distortion)	-	0	-
5.2.3(Fragmentation test)	-	0	-
5.2.7(Four point bending)	-	0	-
5.2.6(Surface compression)	-	0	-
5.2.5.1(Resistance to shock)	-	0	-
5.2.5.2(Resistance to human impact)	-	0	-
5.3.1(Thickness test)	-	0	-
5.3.2.1(Dimension and Squarenes test)	-	0	-
5.3.6(Defects in central area test)	-	0	-
5.3.6.7(Defects in central area test)	-	0	-
5.3.5(Fracture and adhesion)	-	0	-
5.3.8(Resistance to human impact)	-	0	-
5.3.4(Boil test)	-	0	-
5.3.4(Bake test)	-	0	-
5.3.7(Humidity test with condensation)	-	0	-
5.3.7(Humidity test without condensation)	-	0	-
5.3.3(Light stability test)	-	0	-
5.3.2.2(Edge displacement test)	-	0	-
5.2.2(5.2.2 Dimension and Squarenes test)	-	0	-
5.2.4(measurement of wave and roller wave)	-	0	-
5.2.8(Fabrication in Glass)	-	0	-
Cl. No. 5.2.2.3.1, Table No. 1A(Shape accuracy, girth and length)	-	0	-
Cl. No. 5.2.2.3.2(Edge straightness deviation)	-	0	-
Cl. No. 5.2.2.3.3(Maximum cross-curve deviation)	-	0	-
4(Types)	-	0	-
5.1.1(General)	-	0	-
5.1.2(Optical Faults-IS 14900)	-	0	-
5.1.2(Spot Faults of category A/B/C/D -IS 14900)	-	0	-
5.1.2(Reams, Strings and Lines-IS 14900)	-	0	-
5.1.2(Linear / Extended Faults -IS 14900)	-	0	-
5.2.1 (Thickness -IS 17004 & IS 14900)	-	0	-
5.2.2.1( Dimensions- Width )	-	0	-
5.2.2.1( Dimensions- Length)	-	0	-
5.2.2.2( Squareness)	-	0	-
5.2.3 (Fragmentation Test- IS 17004)	-	0	-
5.2.4-a( Flatness-Overall bow-IS 17004)	-	0	-
5.2.4-b( Flatness-Roller wave distortion-IS 17005)	-	0	-
5.2.4-c( Flatness-Edge lift-IS 17006)	-	0	-
5.2.4-d( Flatness-Local distortion-IS 17007)	-	0	-
5.2.4.1 (Other distortions)	-	0	-
5.2.5.1( Resistance to shock- IS 17004)	-	0	-
5.2.5.2( Resistance to human impact- IS 17004)	-	0	-
5.2.6( Surface Compression (Optional)- IS 17004)	-	0	-
5.2.7( Mechanical Strength — Four Point Bending Test (Optional)- IS 17004)	-	0	-
5.2.8.1 & 5.2.8.3-Table 7(Diameter of Holes & Deviations on holes )	-	0	-
5.2.8.3-Table 8(Deviations on position of holes and Cutouts Location)	-	0	-
5.3.1 (Thickness-IS 17004 & IS 14900)	-	0	-
5.3.2.1( Dimensions and squareness- Width )	-	0	-
5.3.2.1( Dimensions and squareness- Length)	-	0	-
5.3.2.1( Dimensions and squareness-Squareness)	-	0	-
5.3.2.2 (Edge displacement)	-	0	-
5.3.3( Light Stability Test-IS 17004)	-	0	-
5.3.3( Light Stability Test-IS 17004)	-	0	-
5.3.4( Boil and Bake Tests-IS 17004)	-	0	-
5.3.5( Fracture and Adhesion Test-IS 17004)	-	0	-
5.3.6.1( Spot defects in the central area)	-	0	-
5.3.6.2 (Linear defects in the central area)	-	0	-
5.3.6.3( Defects in the outer area for framed edges)	-	0	-
5.3.6.4( Vents)	-	0	-
5.3.6.5( Creases and streaks)	-	0	-
5.3.6.6( Defects on edge which will not be framed)	-	0	-
5.3.7( Humidity Test – Optional)	-	0	-
5.3.8( Resistance to Human Impact Test)	-	0	-
4(Types)	-	0	-
5.1.1(General)	-	0	-
5.1.2(Optical Faults-IS 14900)	-	0	-
5.1.2(Spot Faults of category A/B/C/D -IS 14900)	-	0	-
5.1.2(Reams, Strings and Lines-IS 14900)	-	0	-
5.1.2(Linear / Extended Faults -IS 14900)	-	0	-
5.2.1 (Thickness -IS 17004 & IS 14900)	-	0	-
5.2.2.1( Dimensions- Width )	-	0	-
5.2.2.1( Dimensions- Length)	-	0	-
5.2.2.2( Squareness)	-	0	-
5.2.3 (Fragmentation Test- IS 17004)	-	0	-
5.2.4-a( Flatness-Overall bow-IS 17004)	-	0	-
5.2.4-b( Flatness-Roller wave distortion-IS 17005)	-	0	-
5.2.4-c( Flatness-Edge lift-IS 17006)	-	0	-
5.2.4-d( Flatness-Local distortion-IS 17007)	-	0	-
5.2.4.1 (Other distortions)	-	0	-
5.2.5.1( Resistance to shock- IS 17004)	-	0	-
5.2.5.2( Resistance to human impact- IS 17004)	-	0	-
5.2.6( Surface Compression (Optional)- IS 17004)	-	0	-
5.2.7( Mechanical Strength — Four Point Bending Test (Optional)- IS 17004)	-	0	-
5.2.8.1 & 5.2.8.3-Table 7(Diameter of Holes & Deviations on holes )	-	0	-
5.2.8.3-Table 8(Deviations on position of holes and Cutouts Location)	-	0	-
5.3.1 (Thickness-IS 17004 & IS 14900)	-	0	-
5.3.2.1( Dimensions and squareness- Width )	-	0	-
5.3.2.1( Dimensions and squareness- Length)	-	0	-
5.3.2.1( Dimensions and squareness-Squareness)	-	0	-
5.3.2.2 (Edge displacement)	-	0	-
5.3.3( Light Stability Test-IS 17004)	-	0	-
5.3.3( Light Stability Test-IS 17004)	-	0	-
5.3.4( Boil and Bake Tests-IS 17004)	-	0	-
5.3.5( Fracture and Adhesion Test-IS 17004)	-	0	-
5.3.6.1( Spot defects in the central area)	-	0	-
5.3.6.2 (Linear defects in the central area)	-	0	-
5.3.6.3( Defects in the outer area for framed edges)	-	0	-
5.3.6.4( Vents)	-	0	-
5.3.6.5( Creases and streaks)	-	0	-
5.3.6.6( Defects on edge which will not be framed)	-	0	-
5.3.7( Humidity Test – Optional)	-	0	-
5.3.8( Resistance to Human Impact Test)	-	0	-
5.2.1(Thickness)	-	0	-
5.2.2(Dimension and Squarenes)	-	0	-
5.2.4(Overall Bow)	-	0	-
5.2.4(Measurement of wave and roller wave)	-	0	-
5.2.4(Edge lift)	-	0	-
5.2.4(Local distortion)	-	0	-
5.2.3(Fragmentation test)	-	0	-
5.2.7(Four point bending)	-	0	-
5.2.6(Surface compression)	-	0	-
5.2.5.1(Resistance to shock)	-	0	-
5.2.5.2(Resistance to human impact)	-	0	-
5.3.1(Thickness test)	-	0	-
5.3.2.1(Dimension and Squarenes test)	-	0	-
5.3.6(Defects in central area test)	-	0	-
5.3.6.7(Defects in central area test)	-	0	-
5.3.5(Fracture and adhesion)	-	0	-
5.3.8(Resistance to human impact)	-	0	-
5.3.4(Boil test)	-	0	-
5.3.4(Bake test)	-	0	-
5.3.7(Humidity test with condensation)	-	0	-
5.3.7(Humidity test without condensation)	-	0	-
5.3.3(Light stability test)	-	0	-
5.3.2.2(Edge displacement test)	-	0	-
5.2.2(5.2.2 Dimension and Squarenes test)	-	0	-
5.2.4(measurement of wave and roller wave)	-	0	--
5.2.8(Fabrication in Glass)	-	0	-
Cl. No. 5.2.2.3.1, Table No. 1A(Shape accuracy, girth and length)	-	0	-
Cl. No. 5.2.2.3.2(Edge straightness deviation)	-	0	-
Cl. No. 5.2.2.3.3(Maximum cross-curve deviation)	-	0	-
4(Types)	-	0	-
5.1.1(General)	-	0	-
5.1.2(Optical Faults-IS 14900)	-	0	-
5.1.2(Spot Faults of category A/B/C/D -IS 14900)	-	0	-
5.1.2(Reams, Strings and Lines-IS 14900)	-	0	-
5.1.2(Linear / Extended Faults -IS 14900)	-	0	-
5.2.1 (Thickness -IS 17004 & IS 14900)	-	0	-
5.2.2.1( Dimensions- Width )	-	0	-
5.2.2.1( Dimensions- Length)	-	0	-
5.2.2.2( Squareness)	-	0	-
5.2.3 (Fragmentation Test- IS 17004)	-	0	-
5.2.4-a( Flatness-Overall bow-IS 17004)	-	0	-
5.2.4-b( Flatness-Roller wave distortion-IS 17005)	-	0	-
5.2.4-c( Flatness-Edge lift-IS 17006)	-	0	-
5.2.4-d( Flatness-Local distortion-IS 17007)	-	0	-
5.2.4.1 (Other distortions)	-	0	-
5.2.5.1( Resistance to shock- IS 17004)	-	0	-
5.2.5.2( Resistance to human impact- IS 17004)	-	0	-
5.2.6( Surface Compression (Optional)- IS 17004)	-	0	-
5.2.7( Mechanical Strength — Four Point Bending Test (Optional)- IS 17004)	-	0	-
5.2.8.1 & 5.2.8.3-Table 7(Diameter of Holes & Deviations on holes )	-	0	-
5.2.8.3-Table 8(Deviations on position of holes and Cutouts Location)	-	0	-
5.3.1 (Thickness-IS 17004 & IS 14900)	-	0	-
5.3.2.1( Dimensions and squareness- Width )	-	0	-
5.3.2.1( Dimensions and squareness- Length)	-	0	-
5.3.2.1( Dimensions and squareness-Squareness)	-	0	-
5.3.2.2 (Edge displacement)	-	0	-
5.3.3( Light Stability Test-IS 17004)	-	0	-
5.3.3( Light Stability Test-IS 17004)	-	0	-
5.3.4( Boil and Bake Tests-IS 17004)	-	0	-
5.3.5( Fracture and Adhesion Test-IS 17004)	-	0	-
5.3.6.1( Spot defects in the central area)	-	0	-
5.3.6.2 (Linear defects in the central area)	-	0	-
5.3.6.3( Defects in the outer area for framed edges)	-	0	-
5.3.6.4( Vents)	-	0	-
5.3.6.5( Creases and streaks)	-	0	-
5.3.6.6( Defects on edge which will not be framed)	-	0	-
5.3.7( Humidity Test – Optional)	-	0	-
5.3.8( Resistance to Human Impact Test)	-	0	-
4(Types)	-	0	-
5.1.1(General)	-	0	-
5.1.2(Optical Faults-IS 14900)	-	0	-
5.1.2(Spot Faults of category A/B/C/D -IS 14900)	-	0	-
5.1.2(Reams, Strings and Lines-IS 14900)	-	0	-
5.1.2(Linear / Extended Faults -IS 14900)	-	0	-
5.2.1 (Thickness -IS 17004 & IS 14900)	-	0	-
5.2.2.1( Dimensions- Width )	-	0	-
5.2.2.1( Dimensions- Length)	-	0	-
5.2.2.2( Squareness)	-	0	-
5.2.3 (Fragmentation Test- IS 17004)	-	0	-
5.2.4-a( Flatness-Overall bow-IS 17004)	-	0	-
5.2.4-b( Flatness-Roller wave distortion-IS 17005)	-	0	-
5.2.4-c( Flatness-Edge lift-IS 17006)	-	0	-
5.2.4-d( Flatness-Local distortion-IS 17007)	-	0	-
5.2.4.1 (Other distortions)	-	0	-
5.2.5.1( Resistance to shock- IS 17004)	-	0	-
5.2.5.2( Resistance to human impact- IS 17004)	-	0	-
5.2.6( Surface Compression (Optional)- IS 17004)	-	0	-
5.2.7( Mechanical Strength — Four Point Bending Test (Optional)- IS 17004)	-	0	-
5.2.8.1 & 5.2.8.3-Table 7(Diameter of Holes & Deviations on holes )	-	0	-
5.2.8.3-Table 8(Deviations on position of holes and Cutouts Location)	-	0	-
5.3.1 (Thickness-IS 17004 & IS 14900)	-	0	-
5.3.2.1( Dimensions and squareness- Width )	-	0	-
5.3.2.1( Dimensions and squareness- Length)	-	0	-
5.3.2.1( Dimensions and squareness-Squareness)	-	0	-
5.3.2.2 (Edge displacement)	-	0	-
5.3.3( Light Stability Test-IS 17004)	-	0	-
5.3.3( Light Stability Test-IS 17004)	-	0	-
5.3.4( Boil and Bake Tests-IS 17004)	-	0	-
5.3.5( Fracture and Adhesion Test-IS 17004)	-	0	-
5.3.6.1( Spot defects in the central area)	-	0	-
5.3.6.2 (Linear defects in the central area)	-	0	-
5.3.6.3( Defects in the outer area for framed edges)	-	0	-
5.3.6.4( Vents)	-	0	-
5.3.6.5( Creases and streaks)	-	0	-
5.3.6.6( Defects on edge which will not be framed)	-	0	-
5.3.7( Humidity Test – Optional)	-	0	-
5.3.8( Resistance to Human Impact Test)	-	0	-
5.2.1(Thickness)	-	0	-
5.2.2(Dimension and Squarenes)	-	0	-
5.2.4(Overall Bow)	-	0	-
5.2.4(Measurement of wave and roller wave)	-	0	-
5.2.4(Edge lift)	-	0	-
5.2.4(Local distortion)	-	0	-
5.2.3(Fragmentation test)	-	0	-
5.2.7(Four point bending)	-	0	-
5.2.6(Surface compression)	-	0	-
5.2.5.1(Resistance to shock)	-	0	-
5.2.5.2(Resistance to human impact)	-	0	-
5.3.1(Thickness test)	-	0	-
5.3.2.1(Dimension and Squarenes test)	-	0	-
5.3.6(Defects in central area test)	-	0	-
5.3.6.7(Defects in central area test)	-	0	-
5.3.5(Fracture and adhesion)	-	0	-
5.3.8(Resistance to human impact)	-	0	-
5.3.4(Boil test)	-	0	-
5.3.4(Bake test)	-	0	-
5.3.7(Humidity test with condensation)	-	0	-
5.3.7(Humidity test without condensation)	-	0	-
5.3.3(Light stability test)	-	0	-
5.3.2.2(Edge displacement test)	-	0	-
5.2.2(5.2.2 Dimension and Squarenes test)	-	0	-
5.2.4(measurement of wave and roller wave)	-	0	-
5.2.8(Fabrication in Glass)	-	0	-
Cl. No. 5.2.2.3.1, Table No. 1A(Shape accuracy, girth and length)	-	0	-
Cl. No. 5.2.2.3.2(Edge straightness deviation)	-	0	-
Cl. No. 5.2.2.3.3(Maximum cross-curve deviation)	-	0	-
As per Clause 5.3.9(Laminated Glass)	-	0	-
As per Clause 5.2.8.2(Toughened)	-	0	-
As per Clause 5.2.8.4(Toughened)	-	0	-
As per Clause 5.2.9(Toughened)	-	0	-
As per Clause 5.3.6.4(Laminated Glass)	-	0	-
As per Clause 5.3.6.5(Laminated Glass)	-	0	-
As per Clause 5.3.6.6(Laminated Glass)	-	0	-
As per Clause 5.5.2.1(Laminated Glass and Glass-Plastic Panes)	-	0	-
As per Clause 5.5.3.2(Laminated Glass and Glass-Plastic Panes)	-	0	-
As per Clause 5.6.2(Rigid Plastic Glazing)	-	0	-
As per Clause 5.7.1(Flexible Plastic)	-	0	-
As per Clause 3.7(Wind screen and Panes)	-	0	-
As per Clause 4.1(Wind screen and Panes)	-	0	-
4(Types)	-	0	-
5.1.1(General)	-	0	-
5.1.2(Optical Faults-IS 14900)	-	0	-
5.1.2(Spot Faults of category A/B/C/D -IS 14900)	-	0	-
5.1.2(Reams, Strings and Lines-IS 14900)	-	0	-
5.1.2(Linear / Extended Faults -IS 14900)	-	0	-
5.2.1 (Thickness -IS 17004 & IS 14900)	-	0	-
5.2.2.1( Dimensions- Width )	-	0	-
5.2.2.1( Dimensions- Length)	-	0	-
5.2.2.2( Squareness)	-	0	-
5.2.3 (Fragmentation Test- IS 17004)	-	0	-
5.2.4-a( Flatness-Overall bow-IS 17004)	-	0	-
5.2.4-b( Flatness-Roller wave distortion-IS 17005)	-	0	-
5.2.4-c( Flatness-Edge lift-IS 17006)	-	0	-
5.2.4-d( Flatness-Local distortion-IS 17007)	-	0	-
5.2.4.1 (Other distortions)	-	0	-
5.2.5.1( Resistance to shock- IS 17004)	-	0	-
5.2.5.2( Resistance to human impact- IS 17004)	-	0	-
5.2.6( Surface Compression (Optional)- IS 17004)	-	0	-
5.2.7( Mechanical Strength — Four Point Bending Test (Optional)- IS 17004)	-	0	-
5.2.8.1 & 5.2.8.3-Table 7(Diameter of Holes & Deviations on holes )	-	0	-
5.2.8.3-Table 8(Deviations on position of holes and Cutouts Location)	-	0	-
5.3.1 (Thickness-IS 17004 & IS 14900)	-	0	-
5.3.2.1( Dimensions and squareness- Width )	-	0	-
5.3.2.1( Dimensions and squareness- Length)	-	0	-
5.3.2.1( Dimensions and squareness-Squareness)	-	0	-
5.3.2.2 (Edge displacement)	-	0	-
5.3.3( Light Stability Test-IS 17004)	-	0	-
5.3.3( Light Stability Test-IS 17004)	-	0	-
5.3.4( Boil and Bake Tests-IS 17004)	-	0	-
5.3.5( Fracture and Adhesion Test-IS 17004)	-	0	-
5.3.6.1( Spot defects in the central area)	-	0	-
5.3.6.2 (Linear defects in the central area)	-	0	-
5.3.6.3( Defects in the outer area for framed edges)	-	0	-
5.3.6.4( Vents)	-	0	-
5.3.6.5( Creases and streaks)	-	0	-
5.3.6.6( Defects on edge which will not be framed)	-	0	-
5.3.7( Humidity Test – Optional)	-	0	-
5.3.8( Resistance to Human Impact Test)	-	0	-
4(Types)	-	0	-
5.1.1(General)	-	0	-
5.1.2(Optical Faults-IS 14900)	-	0	-
5.1.2(Spot Faults of category A/B/C/D -IS 14900)	-	0	-
5.1.2(Reams, Strings and Lines-IS 14900)	-	0	-
5.1.2(Linear / Extended Faults -IS 14900)	-	0	-
5.2.1 (Thickness -IS 17004 & IS 14900)	-	0	-
5.2.2.1( Dimensions- Width )	-	0	-
5.2.2.1( Dimensions- Length)	-	0	-
5.2.2.2( Squareness)	-	0	-
5.2.3 (Fragmentation Test- IS 17004)	-	0	-
5.2.4-a( Flatness-Overall bow-IS 17004)	-	0	-
5.2.4-b( Flatness-Roller wave distortion-IS 17005)	-	0	-
5.2.4-c( Flatness-Edge lift-IS 17006)	-	0	-
5.2.4-d( Flatness-Local distortion-IS 17007)	-	0	-
5.2.4.1 (Other distortions)	-	0	-
5.2.5.1( Resistance to shock- IS 17004)	-	0	-
5.2.5.2( Resistance to human impact- IS 17004)	-	0	-
5.2.6( Surface Compression (Optional)- IS 17004)	-	0	-
5.2.7( Mechanical Strength — Four Point Bending Test (Optional)- IS 17004)	-	0	-
5.2.8.1 & 5.2.8.3-Table 7(Diameter of Holes & Deviations on holes )	-	0	-
5.2.8.3-Table 8(Deviations on position of holes and Cutouts Location)	-	0	-
5.3.1 (Thickness-IS 17004 & IS 14900)	-	0	-
5.3.2.1( Dimensions and squareness- Width )	-	0	-
5.3.2.1( Dimensions and squareness- Length)	-	0	-
5.3.2.1( Dimensions and squareness-Squareness)	-	0	-
5.3.2.2 (Edge displacement)	-	0	-
5.3.3( Light Stability Test-IS 17004)	-	0	-
5.3.3( Light Stability Test-IS 17004)	-	0	-
5.3.4( Boil and Bake Tests-IS 17004)	-	0	-
5.3.5( Fracture and Adhesion Test-IS 17004)	-	0	-
5.3.6.1( Spot defects in the central area)	-	0	-
5.3.6.2 (Linear defects in the central area)	-	0	-
5.3.6.3( Defects in the outer area for framed edges)	-	0	-
5.3.6.4( Vents)	-	0	-
5.3.6.5( Creases and streaks)	-	0	-
5.3.6.6( Defects on edge which will not be framed)	-	0	-
5.3.7( Humidity Test – Optional)	-	0	-
5.3.8( Resistance to Human Impact Test)	-	0	-
5.2.1(Thickness)	-	0	-
5.2.2(Dimension and Squarenes)	-	0	-
5.2.4(Overall Bow)	-	0	-
5.2.4(Measurement of wave and roller wave)	-	0	-
5.2.4(Edge lift)	-	0	-
5.2.4(Local distortion)	-	0	-
5.2.3(Fragmentation test)	-	0	-
5.2.7(Four point bending)	-	0	-
5.2.6(Surface compression)	-	0	-
5.2.5.1(Resistance to shock)	-	0	-
5.2.5.2(Resistance to human impact)	-	0	-
5.3.1(Thickness test)	-	0	-
5.3.2.1(Dimension and Squarenes test)	-	0	-
5.3.6(Defects in central area test)	-	0	-
5.3.6.7(Defects in central area test)	-	0	-
5.3.5(Fracture and adhesion)	-	0	-
5.3.8(Resistance to human impact)	-	0	-
5.3.4(Boil test)	-	0	-
5.3.4(Bake test)	-	0	-
5.3.7(Humidity test with condensation)	-	0	-
5.3.7(Humidity test without condensation)	-	0	-
5.3.3(Light stability test)	-	0	-
5.3.2.2(Edge displacement test)	-	0	-
5.2.2(5.2.2 Dimension and Squarenes test)	-	0	-
5.2.4(measurement of wave and roller wave)	-	0	-
5.2.8(Fabrication in Glass)	-	0	-
Cl. No. 5.2.2.3.1, Table No. 1A(Shape accuracy, girth and length)	-	0	-
Cl. No. 5.2.2.3.2(Edge straightness deviation)	-	0	-
Cl. No. 5.2.2.3.3(Maximum cross-curve deviation)	-	0	-
As per Clause 5.3.9(Laminated Glass)	-	0	-
As per Clause 5.2.8.2(Toughened)	-	0	-
As per Clause 5.2.8.4(Toughened)	-	0	-
As per Clause 5.2.9(Toughened)	-	0	-
As per Clause 5.3.6.4(Laminated Glass)	-	0	-
As per Clause 5.3.6.5(Laminated Glass)	-	0	-
As per Clause 5.3.6.6(Laminated Glass)	-	0	-
As per Clause 5.5.2.1(Laminated Glass and Glass-Plastic Panes)	-	0	-
As per Clause 5.5.3.2(Laminated Glass and Glass-Plastic Panes)	-	0	-
As per Clause 5.6.2(Rigid Plastic Glazing)	-	0	-
As per Clause 5.7.1(Flexible Plastic)	-	0	-
As per Clause 3.7(Wind screen and Panes)	-	0	-
As per Clause 4.1(Wind screen and Panes)	-	0	-
4(Types)	-	0	-
5.1.1(General)	-	0	-
5.1.2(Optical Faults-IS 14900)	-	0	-
5.1.2(Spot Faults of category A/B/C/D -IS 14900)	-	0	-
5.1.2(Reams, Strings and Lines-IS 14900)	-	0	-
5.1.2(Linear / Extended Faults -IS 14900)	-	0	-
5.2.1 (Thickness -IS 17004 & IS 14900)	-	0	-
5.2.2.1( Dimensions- Width )	-	0	-
5.2.2.1( Dimensions- Length)	-	0	-
5.2.2.2( Squareness)	-	0	-
5.2.3 (Fragmentation Test- IS 17004)	-	0	-
5.2.4-a( Flatness-Overall bow-IS 17004)	-	0	-
5.2.4-b( Flatness-Roller wave distortion-IS 17005)	-	0	-
5.2.4-c( Flatness-Edge lift-IS 17006)	-	0	-
5.2.4-d( Flatness-Local distortion-IS 17007)	-	0	-
5.2.4.1 (Other distortions)	-	0	-
5.2.5.1( Resistance to shock- IS 17004)	-	0	-
5.2.5.2( Resistance to human impact- IS 17004)	-	0	-
5.2.6( Surface Compression (Optional)- IS 17004)	-	0	-
5.2.7( Mechanical Strength — Four Point Bending Test (Optional)- IS 17004)	-	0	-
5.2.8.1 & 5.2.8.3-Table 7(Diameter of Holes & Deviations on holes )	-	0	-
5.2.8.3-Table 8(Deviations on position of holes and Cutouts Location)	-	0	-
5.3.1 (Thickness-IS 17004 & IS 14900)	-	0	-
5.3.2.1( Dimensions and squareness- Width )	-	0	-
5.3.2.1( Dimensions and squareness- Length)	-	0	-
5.3.2.1( Dimensions and squareness-Squareness)	-	0	-
5.3.2.2 (Edge displacement)	-	0	-
5.3.3( Light Stability Test-IS 17004)	-	0	-
5.3.3( Light Stability Test-IS 17004)	-	0	-
5.3.4( Boil and Bake Tests-IS 17004)	-	0	-
5.3.5( Fracture and Adhesion Test-IS 17004)	-	0	-
5.3.6.1( Spot defects in the central area)	-	0	-
5.3.6.2 (Linear defects in the central area)	-	0	-
5.3.6.3( Defects in the outer area for framed edges)	-	0	-
5.3.6.4( Vents)	-	0	-
5.3.6.5( Creases and streaks)	-	0	-
5.3.6.6( Defects on edge which will not be framed)	-	0	-
5.3.7( Humidity Test – Optional)	-	0	-
5.3.8( Resistance to Human Impact Test)	-	0	-
4(Types)	-	0	-
5.1.1(General)	-	0	-
5.1.2(Optical Faults-IS 14900)	-	0	-
5.1.2(Spot Faults of category A/B/C/D -IS 14900)	-	0	-
5.1.2(Reams, Strings and Lines-IS 14900)	-	0	-
5.1.2(Linear / Extended Faults -IS 14900)	-	0	-
5.2.1 (Thickness -IS 17004 & IS 14900)	-	0	-
5.2.2.1( Dimensions- Width )	-	0	-
5.2.2.1( Dimensions- Length)	-	0	-
5.2.2.2( Squareness)	-	0	-
5.2.3 (Fragmentation Test- IS 17004)	-	0	-
5.2.4-a( Flatness-Overall bow-IS 17004)	-	0	-
5.2.4-b( Flatness-Roller wave distortion-IS 17005)	-	0	-
5.2.4-c( Flatness-Edge lift-IS 17006)	-	0	-
5.2.4-d( Flatness-Local distortion-IS 17007)	-	0	-
5.2.4.1 (Other distortions)	-	0	-
5.2.5.1( Resistance to shock- IS 17004)	-	0	-
5.2.5.2( Resistance to human impact- IS 17004)	-	0	-
5.2.6( Surface Compression (Optional)- IS 17004)	-	0	-
5.2.7( Mechanical Strength — Four Point Bending Test (Optional)- IS 17004)	-	0	-
5.2.8.1 & 5.2.8.3-Table 7(Diameter of Holes & Deviations on holes )	-	0	-
5.2.8.3-Table 8(Deviations on position of holes and Cutouts Location)	-	0	-
5.3.1 (Thickness-IS 17004 & IS 14900)	-	0	-
5.3.2.1( Dimensions and squareness- Width )	-	0	-
5.3.2.1( Dimensions and squareness- Length)	-	0	-
5.3.2.1( Dimensions and squareness-Squareness)	-	0	-
5.3.2.2 (Edge displacement)	-	0	-
5.3.3( Light Stability Test-IS 17004)	-	0	-
5.3.3( Light Stability Test-IS 17004)	-	0	-
5.3.4( Boil and Bake Tests-IS 17004)	-	0	-
5.3.5( Fracture and Adhesion Test-IS 17004)	-	0	-
5.3.6.1( Spot defects in the central area)	-	0	-
5.3.6.2 (Linear defects in the central area)	-	0	-
5.3.6.3( Defects in the outer area for framed edges)	-	0	-
5.3.6.4( Vents)	-	0	-
5.3.6.5( Creases and streaks)	-	0	-
5.3.6.6( Defects on edge which will not be framed)	-	0	-
5.3.7( Humidity Test – Optional)	-	0	-
5.3.8( Resistance to Human Impact Test)	-	0	-
5.2.1(Thickness)	-	0	-
5.2.2(Dimension and Squarenes)	-	0	-
5.2.4(Overall Bow)	-	0	-
5.2.4(Measurement of wave and roller wave)	-	0	-
5.2.4(Edge lift)	-	0	-
5.2.4(Local distortion)	-	0	-
5.2.3(Fragmentation test)	-	0	-
5.2.7(Four point bending)	-	0	-
5.2.6(Surface compression)	-	0	-
5.2.5.1(Resistance to shock)	-	0	-
5.2.5.2(Resistance to human impact)	-	0	-
5.3.1(Thickness test)	-	0	-
5.3.2.1(Dimension and Squarenes test)	-	0	-
5.3.6(Defects in central area test)	-	0	-
5.3.6.7(Defects in central area test)	-	0	-
5.3.5(Fracture and adhesion)	-	0	-
5.3.8(Resistance to human impact)	-	0	-
5.3.4(Boil test)	-	0	-
5.3.4(Bake test)	-	0	-
5.3.7(Humidity test with condensation)	-	0	-
5.3.7(Humidity test without condensation)	-	0	-
5.3.3(Light stability test)	-	0	-
5.3.2.2(Edge displacement test)	-	0	-
5.2.2(5.2.2 Dimension and Squarenes test)	-	0	-
5.2.4(measurement of wave and roller wave)	-	0	-
5.2.8(Fabrication in Glass)	-	0	-
Cl. No. 5.2.2.3.1, Table No. 1A(Shape accuracy, girth and length)	-	0	-
Cl. No. 5.2.2.3.2(Edge straightness deviation)	-	0	-
Cl. No. 5.2.2.3.3(Maximum cross-curve deviation)	-	0	-
As per Clause 5.3.9(Laminated Glass)	-	0	-
As per Clause 5.2.8.2(Toughened)	-	0	-
As per Clause 5.2.8.4(Toughened)	-	0	-
As per Clause 5.2.9(Toughened)	-	0	-
As per Clause 5.3.6.4(Laminated Glass)	-	0	-
As per Clause 5.3.6.5(Laminated Glass)	-	0	-
As per Clause 5.3.6.6(Laminated Glass)	-	0	-
As per Clause 5.5.2.1(Laminated Glass and Glass-Plastic Panes)	-	0	-
As per Clause 5.5.3.2(Laminated Glass and Glass-Plastic Panes)	-	0	-
As per Clause 5.6.2(Rigid Plastic Glazing)	-	0	-
As per Clause 5.7.1(Flexible Plastic)	-	0	-
As per Clause 3.7(Wind screen and Panes)	-	0	-
As per Clause 4.1(Wind screen and Panes)	-	0	-

22 May, 2026

-
Included w.e.f. 06.09.2024

10090

Bharat Test House Pvt Ltd 1474 Sonipat Haryana

9135626

IS 302 : Part 2 : Sec 11 (1994)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 11 tumbler dryers

Tumbler dryers

22500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(GENERAL REQUIREMENT)	-	0	-
4(GENERAL NOTES ON TESTS)	-	0	-
5(RATING)	-	100	5% discount for BIS
6(CLASSIFICATION)	-	100	5% discount for BIS
7(MARKING)	-	100	5% discount for BIS
8(PROTECTION AGAINST ELECTRIC SHOCK)	-	500	5% discount for BIS
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	1000	5% discount for BIS
10(INPUT AND CURRENT)	-	700	5% discount for BIS
11(HEATING)	-	1000	5% discount for BIS
12(OPERATION TJNDER OVERLOAD CONDITIONS OF APPLIANCES WITH HEATING ELEMENTS)	-	0	-
13(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	1500	5% discount for BIS
14(RADIO AND TELEVISION INTERFERENCE SUPPRESSION)	-	1250	5% discount for BIS
15(MOISTURE RESISTANCE)	-	3000	5% discount for BIS
16(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	1500	5% discount for BIS
17(OVERLOAD PROTECTION)	-	500	5% discount for BIS
18(ENDURANCE )	-	0	5% discount for BIS
19(ABNORMAL OPERATION)	-	2500	5% discount for BIS
20(STABILITY AND MECHANICAL HAZARDS)	-	750	5% discount for BIS
21(MECHANICAL STRENGTH)	-	750	5% discount for BIS
22(CONSTRUCTION)	-	1250	5% discount for BIS
23(INTERNAL WIRING)	-	500	5% discount for BIS
24(COMPONENTS)	-	500	5% discount for BIS
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS)	-	750	5% discount for BIS
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	500	5% discount for BIS
27(PROVISION FOR EARTHING)	-	500	5% discount for BIS
28(SCREWS AND CONNECTIONS)	-	500	5% discount for BIS
29(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH INSULATION)	-	500	5% discount for BIS
30(RESISTANCE TO HEAT, FIRE AND TACKING)	-	750	5% discount for BIS
31(RESISTANCE TO RUSTING)	-	750	5% discount for BIS
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	750	5% discount for BIS
101.1(Type Tests)	-	0	-
101.2(Acceptance Tests)	-	0	-
101.3(Routine Tests)	-	0	-
3(GENERAL REQUIREMENT)	-	0	-
4(GENERAL NOTES ON TESTS)	-	0	-
5(RATING)	-	0	-
6(CLASSIFICATION)	-	0	-
7(MARKING)	-	0	-
8(PROTECTION AGAINST ELECTRIC SHOCK)	-	0	-
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	0	-
10(INPUT AND CURRENT)	-	0	-
11(HEATING)	-	0	-
12(OPERATION TJNDER OVERLOAD CONDITIONS OF APPLIANCES WITH HEATING ELEMENTS)	-	0	-
13(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	0	-
14(RADIO AND TELEVISION INTERFERENCE SUPPRESSION)	-	0	-
15(MOISTURE RESISTANCE)	-	0	-
16(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	0	-
17(OVERLOAD PROTECTION)	-	0	-
18(ENDURANCE )	-	0	-
19(ABNORMAL OPERATION)	-	0	-
20(STABILITY AND MECHANICAL HAZARDS)	-	0	-
21(MECHANICAL STRENGTH)	-	0	-
22(CONSTRUCTION)	-	0	-
23(INTERNAL WIRING)	-	0	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS)	-	0	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	0	-
27(PROVISION FOR EARTHING)	-	0	-
28(SCREWS AND CONNECTIONS)	-	0	-
29(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH INSULATION)	-	0	-
30(RESISTANCE TO HEAT, FIRE AND TACKING)	-	0	-
31(RESISTANCE TO RUSTING)	-	0	-
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	0	-
101.1(Type Tests)	-	0	-
101.2(Acceptance Tests)	-	0	-
101.3(Routine Tests)	-	0	-

19 Mar, 2029

-
24 (COMPONENTS)

10091

Atmy Analytical Labs Private Limited (Unit-2), Greater Noida

8176106

IS 1475 : Part 1 (2001)

Self - Contained drinking water coolers - Specification: Part 1 energy consumption and performance (Third Revision)

24750 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.2(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.3(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.4(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.5(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.6(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.7(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.8(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.9(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.1(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.11(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.12(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.13(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.14(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.15(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.16(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.17(COMPONENTS AND THEIR MATERIALS)	-	24750	-
7.7.1(Insulation Resistance)	-	24750	-
7.7.2(High Voltage Test)	-	24750	-
7.7.3(Cooling capacity rating test)	-	24750	-
7.7.4(Maximum operating conditions)	-	24750	-
7.8.2(Performance test)	-	24750	-
6.1(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.2(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.3(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.4(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.5(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.6(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.7(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.8(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.9(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.1(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.11(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.12(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.13(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.14(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.15(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.16(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.17(COMPONENTS AND THEIR MATERIALS)	-	24750	-
7.7.1(Insulation Resistance)	-	24750	-
7.7.2(High Voltage Test)	-	24750	-
7.7.3(Cooling capacity rating test)	-	24750	-
7.7.4(Maximum operating conditions)	-	24750	-
7.8.2(Performance test)	-	24750	-
6.1(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.2(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.3(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.4(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.5(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.6(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.7(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.8(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.9(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.1(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.11(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.12(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.13(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.14(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.15(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.16(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.17(COMPONENTS AND THEIR MATERIALS)	-	24750	-
7.7.1(Insulation Resistance)	-	24750	-
7.7.2(High Voltage Test)	-	24750	-
7.7.3(Cooling capacity rating test)	-	24750	-
7.7.4(Maximum operating conditions)	-	24750	-
7.8.2(Performance test)	-	24750	-
6.1(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.2(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.3(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.4(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.5(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.6(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.7(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.8(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.9(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.1(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.11(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.12(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.13(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.14(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.15(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.16(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.17(COMPONENTS AND THEIR MATERIALS)	-	24750	-
7.7.1(Insulation Resistance)	-	24750	-
7.7.2(High Voltage Test)	-	24750	-
7.7.3(Cooling capacity rating test)	-	24750	-
7.7.4(Maximum operating conditions)	-	24750	-
7.8.2(Performance test)	-	24750	-
6.1(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.2(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.3(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.4(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.5(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.6(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.7(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.8(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.9(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.1(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.11(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.12(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.13(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.14(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.15(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.16(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.17(COMPONENTS AND THEIR MATERIALS)	-	24750	-
7.7.1(Insulation Resistance)	-	24750	-
7.7.2(High Voltage Test)	-	24750	-
7.7.3(Cooling capacity rating test)	-	24750	-
7.7.4(Maximum operating conditions)	-	24750	-
7.8.2(Performance test)	-	24750	-
6.1(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.2(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.3(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.4(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.5(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.6(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.7(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.8(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.9(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.1(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.11(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.12(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.13(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.14(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.15(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.16(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.17(COMPONENTS AND THEIR MATERIALS)	-	24750	-
7.7.1(Insulation Resistance)	-	24750	-
7.7.2(High Voltage Test)	-	24750	-
7.7.3(Cooling capacity rating test)	-	24750	-
7.7.4(Maximum operating conditions)	-	24750	-
7.8.2(Performance test)	-	24750	-
7.7.5(Identification Data)	-	24750	-
5(Performance requirements)	-	24750	-
7.8.2(performance test)	-	24750	-
6.1(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.2(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.3(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.4(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.5(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.6(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.7(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.8(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.9(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.1(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.11(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.12(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.13(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.14(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.15(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.16(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.17(COMPONENTS AND THEIR MATERIALS)	-	24750	-
7.7.1(Insulation Resistance)	-	24750	-
7.7.2(High Voltage Test)	-	24750	-
7.7.3(Cooling capacity rating test)	-	24750	-
7.7.4(Maximum operating conditions)	-	24750	-
7.8.2(Performance test)	-	24750	-
6.1(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.2(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.3(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.4(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.5(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.6(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.7(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.8(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.9(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.1(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.11(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.12(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.13(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.14(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.15(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.16(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.17(COMPONENTS AND THEIR MATERIALS)	-	24750	-
7.7.1(Insulation Resistance)	-	24750	-
7.7.2(High Voltage Test)	-	24750	-
7.7.3(Cooling capacity rating test)	-	24750	-
7.7.4(Maximum operating conditions)	-	24750	-
7.8.2(Performance test)	-	24750	-
7.7.5(Identification Data)	-	24750	-
5(Performance requirements)	-	24750	-
7.8.2(performance test)	-	24750	-
6.1(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.2(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.3(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.4(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.5(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.6(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.7(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.8(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.9(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.1(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.11(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.12(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.13(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.14(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.15(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.16(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.17(COMPONENTS AND THEIR MATERIALS)	-	24750	-
7.7.1(Insulation Resistance)	-	24750	-
7.7.2(High Voltage Test)	-	24750	-
7.7.3(Cooling capacity rating test)	-	24750	-
7.7.4(Maximum operating conditions)	-	24750	-
7.8.2(Performance test)	-	24750	-
6.1(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.2(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.3(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.4(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.5(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.6(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.7(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.8(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.9(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.1(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.11(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.12(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.13(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.14(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.15(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.16(COMPONENTS AND THEIR MATERIALS)	-	24750	-
6.17(COMPONENTS AND THEIR MATERIALS)	-	24750	-
7.7.1(Insulation Resistance)	-	24750	-
7.7.2(High Voltage Test)	-	24750	-
7.7.3(Cooling capacity rating test)	-	24750	-
7.7.4(Maximum operating conditions)	-	24750	-
7.8.2(Performance test)	-	24750	-
7.7.5(Identification Data)	-	24750	-
5(Performance requirements)	-	24750	-
7.8.2(performance test)	-	24750	-

08 Feb, 2027

-
Included w.e.f 24.07.2024

10092

Bharti Automation Pvt. Ltd.(A Testing Division), Gurugram

8141726

IS 302 : Part 2 : Sec 25 (2014)

Safety of household and similar electrical appliances: Part 2 Particular requirements: Section 25 Microwave ovens

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	0	-
7(Marking and instructions)	-	1000	20% Discount to BIS
8(Protection against live parts)	-	1000	20% Discount to BIS
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	0	-
10(POWER INPUT AND CURRENT)	-	1000	20% Discount to BIS
11(HEATING)	-	1000	20% Discount to BIS
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	1000	20% Discount to BIS
14(IMPULSE VOLTAGE TEST)	-	1000	20% Discount to BIS
15(HUMIDITY TREATMENT TEST)	-	2000	20% Discount to BIS
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	1000	20% Discount to BIS
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	1000	20% Discount to BIS
18(ENDURANCE)	-	5000	20% Discount to BIS
19(ABNORMAL OPERATION)	-	2000	20% Discount to BIS
20(STABILITY AND MECHANICAL HAZARDS)	-	1000	20% Discount to BIS
21(MECHANICAL STRENGTH)	-	1000	20% Discount to BIS
22(CONSTRUCTION)	-	1000	20% Discount to BIS
23(INTERNAL WIRING)	-	1000	20% Discount to BIS
24(COMPONENTS)	-	1000	20% Discount to BIS
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	1000	20% Discount to BIS
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	1000	20% Discount to BIS
27(PROVISION FOR EARTHING)	-	1000	20% Discount to BIS
28(SCREWS AND CONNECTIONS)	-	1000	20% Discount to BIS
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	1000	20% Discount to BIS
30(RESISTANCE TO HEAT AND FIRE)	-	1000	20% Discount to BIS
31(RESISTANCE TO RUSTING)	-	1000	20% Discount to BIS
22.32(Oxygen bomb for rubber material)	-	1000	20% Discount to BIS
22.46(Software)	-	1000	20% Discount to BIS
6.0(Classification)	-	0	-
7(Marking and instructions)	-	1000	20% Discount to BIS
8(Protection against live parts)	-	1000	20% Discount to BIS
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	0	-
10(POWER INPUT AND CURRENT)	-	1000	20% Discount to BIS
11(HEATING)	-	1000	20% Discount to BIS
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	1000	20% Discount to BIS
14(IMPULSE VOLTAGE TEST)	-	1000	20% Discount to BIS
15(HUMIDITY TREATMENT TEST)	-	2000	20% Discount to BIS
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	1000	20% Discount to BIS
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	1000	20% Discount to BIS
18(ENDURANCE)	-	5000	20% Discount to BIS
19(ABNORMAL OPERATION)	-	2000	20% Discount to BIS
20(STABILITY AND MECHANICAL HAZARDS)	-	1000	20% Discount to BIS
21(MECHANICAL STRENGTH)	-	1000	20% Discount to BIS
22(CONSTRUCTION)	-	1000	20% Discount to BIS
23(INTERNAL WIRING)	-	1000	20% Discount to BIS
24(COMPONENTS)	-	1000	20% Discount to BIS
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	1000	20% Discount to BIS
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	1000	20% Discount to BIS
27(PROVISION FOR EARTHING)	-	1000	20% Discount to BIS
28(SCREWS AND CONNECTIONS)	-	1000	20% Discount to BIS
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	1000	20% Discount to BIS
30(RESISTANCE TO HEAT AND FIRE)	-	1000	20% Discount to BIS
31(RESISTANCE TO RUSTING)	-	1000	20% Discount to BIS
22.32(Oxygen bomb for rubber material)	-	1000	20% Discount to BIS
22.46(Software)	-	1000	20% Discount to BIS

05 Aug, 2027

-
-

10093

Testtex India Laboratories Private Limited, Noida

8138306

IS 5557 (2004)

Industrial and protective rubber knee and ankle boots - Specification (Fourth Revision)

Industrial and protective rubber knee and ankle boots

16600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5/5.1.7/5.1.7.8(REQUIREMENTS- Physical Requirements-Resistance to oil)	-	2000	-
5/5.1.1-Fig. 1, Fig. 2 and Fig. 3(REQUIREMENTS-Design)	-	0	-
5/5.1.2 -IS 1638(REQUIREMENTS-Size)	-	0	-
5/5.1.3-Table1(REQUIREMENTS-Thickness)	-	300	-
5/5.1.4/5.1.4.1-Table2(REQUIREMENTS-Materials-Rubber components)	-	6500	Complete Table 2
5/5.1.4/5.1.4.2(REQUIREMENTS-Materials-Fabric- accordance with IS 1969)	-	700	-
5/5.1.4/5.1.4.3(REQUIREMENTS-Materials-Protective Steel Toe Cap- an per IS 5852)	-	3000	Impact Test, Finish, Rust Preventive
5/5.1.6/5.1.6.1-Fig. 1, Fig. 2, Fig. 3, .Fig. 4, Fig. 5 and Table 3.(REQUIREMENTS- Construction)	-	0	-
5/5.1.6/5.1.6.2(REQUIREMENTS- Construction)	-	0	-
5/5.1.7/5.1.7.1(REQUIREMENTS- Physical Requirements-Heat treatment- as per IS 3400 (Part 4))	-	500	-
5/5.1.7/5.1.7.2(REQUIREMENTS- Physical Requirements-Composite strength)	-	1000	-
5/5.1.7/5.1.7.3-Table 4(REQUIREMENTS- Physical Requirements-Flexing endurance- as per Annex B.)	-	1000	-
5/5.1.7/5.1.7.4(REQUIREMENTS- Physical Requirements- Leakage resistance test)	-	1000	-
5/5.1.7/5.1.7.5(REQUIREMENTS- Physical Requirements- Consolidation test- as per IS IS 3400 (Part 5))	-	1000	-
5/5.1.7/5.1.7.6(REQUIREMENTS- Physical Requirements- Performance test- as per Annex C)	-	2000	-
5/5.1.7/5.1.7.7(REQUIREMENTS- Physical Requirements-Height of the boots)	-	300	-
5/5.1.7/5.1.7.8(REQUIREMENTS- Physical Requirements-Resistance to oil)	-	0	Clause Repeated
5/5.1.1-Fig. 1, Fig. 2 and Fig. 3(REQUIREMENTS-Design)	-	0	Clause Repeated
5/5.1.2 -IS 1638(REQUIREMENTS-Size)	-	0	Clause Repeated
5/5.1.3-Table1(REQUIREMENTS-Thickness)	-	0	Clause Repeated
5/5.1.4/5.1.4.1-Table2(REQUIREMENTS-Materials-Rubber components)	-	0	Clause Repeated
5/5.1.4/5.1.4.2(REQUIREMENTS-Materials-Fabric- accordance with IS 1969)	-	0	Clause Repeated
5/5.1.4/5.1.4.3(REQUIREMENTS-Materials-Protective Steel Toe Cap- an per IS 5852)	-	0	Clause Repeated
5/5.1.6/5.1.6.1-Fig. 1, Fig. 2, Fig. 3, .Fig. 4, Fig. 5 and Table 3.(REQUIREMENTS- Construction)	-	0	Clause Repeated
5/5.1.6/5.1.6.2(REQUIREMENTS- Construction)	-	0	Clause Repeated
5/5.1.7/5.1.7.1(REQUIREMENTS- Physical Requirements-Heat treatment- as per IS 3400 (Part 4))	-	0	Clause Repeated
5/5.1.7/5.1.7.2(REQUIREMENTS- Physical Requirements-Composite strength)	-	0	Clause Repeated
5/5.1.7/5.1.7.3-Table 4(REQUIREMENTS- Physical Requirements-Flexing endurance- as per Annex B.)	-	0	Clause Repeated
5/5.1.7/5.1.7.4(REQUIREMENTS- Physical Requirements- Leakage resistance test)	-	0	Clause Repeated
5/5.1.7/5.1.7.5(REQUIREMENTS- Physical Requirements- Consolidation test- as per IS IS 3400 (Part 5))	-	0	Clause Repeated
5/5.1.7/5.1.7.6(REQUIREMENTS- Physical Requirements- Performance test- as per Annex C)	-	0	Clause Repeated
5/5.1.7/5.1.7.7(REQUIREMENTS- Physical Requirements-Height of the boots)	-	0	Clause Repeated
5/5.1.7/5.1.7.8(REQUIREMENTS- Physical Requirements-Resistance to oil)	-	0	Clause Repeated
5/5.1.1-Fig. 1, Fig. 2 and Fig. 3(REQUIREMENTS-Design)	-	0	Clause Repeated
5/5.1.2 -IS 1638(REQUIREMENTS-Size)	-	0	Clause Repeated
5/5.1.3-Table1(REQUIREMENTS-Thickness)	-	0	Clause Repeated
5/5.1.4/5.1.4.1-Table2(REQUIREMENTS-Materials-Rubber components)	-	0	Clause Repeated
5/5.1.4/5.1.4.2(REQUIREMENTS-Materials-Fabric- accordance with IS 1969)	-	0	Clause Repeated
5/5.1.4/5.1.4.3(REQUIREMENTS-Materials-Protective Steel Toe Cap- an per IS 5852)	-	0	Clause Repeated
5/5.1.6/5.1.6.1-Fig. 1, Fig. 2, Fig. 3, .Fig. 4, Fig. 5 and Table 3.(REQUIREMENTS- Construction)	-	0	Clause Repeated
5/5.1.6/5.1.6.2(REQUIREMENTS- Construction)	-	0	Clause Repeated
5/5.1.7/5.1.7.1(REQUIREMENTS- Physical Requirements-Heat treatment- as per IS 3400 (Part 4))	-	0	Clause Repeated
5/5.1.7/5.1.7.2(REQUIREMENTS- Physical Requirements-Composite strength)	-	0	Clause Repeated
5/5.1.7/5.1.7.3-Table 4(REQUIREMENTS- Physical Requirements-Flexing endurance- as per Annex B.)	-	0	Clause Repeated
5/5.1.7/5.1.7.4(REQUIREMENTS- Physical Requirements- Leakage resistance test)	-	0	Clause Repeated
5/5.1.7/5.1.7.5(REQUIREMENTS- Physical Requirements- Consolidation test- as per IS IS 3400 (Part 5))	-	0	Clause Repeated
5/5.1.7/5.1.7.6(REQUIREMENTS- Physical Requirements- Performance test- as per Annex C)	-	0	Clause Repeated
5/5.1.7/5.1.7.7(REQUIREMENTS- Physical Requirements-Height of the boots)	-	0	Clause Repeated
5, 5.1(Requirement)	-	0	Clause Repeated
6.1(Marking)	-	0	-
6, 6.1(Packing)	-	0	-
5, 5.1(Requirement)	-	0	Clause Repeated
6.1(Marking)	-	0	Clause Repeated
6.2(Packing)	-	0	Clause Repeated

-
Included w.e.f. 24.06.2024

10094

BIS, Central Laboratory (CL)

None

IS 14650 (2023)

UNALLOYED AND ALLOYED STEEL INGOT AND SEMI-FINISHED PRODUCTS FOR RE-ROLLING PURPOSES - SPECIFICATION (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause - 7.1 (CARBON)	-
Clause - 7.1 (SULPHUR)	-
Clause - 7.1 (PHOSPHURS)	-
Clause - 7.1 (MANGANESE)	-
Clause - 7.1 (NITROGEN)	-
Clause.7.1 (Silicon)	-
Clause.7.1 (Carbon Equbalant)	-
Clause.7.1 (Microalloy element)	-

-
-

10095

BIS, Central Laboratory (CL)

None

IS 1165 (2022)

WHOLE MILK POWDER - SPECIFICATION (Sixth Revision of IS 1165)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 3.5,Table 1 ,Sl No i) (Moisture)	-
Clause 3.5,Table 1 ,Sl No ii) (Total solids)	-
Clause 3.5,Table 1 ,Sl No iii) (Milk fat)	-
Clause 3.5,Table 2 ,Sl No i) (Aerobic plate count)	-
Clause 3.5,Table 2 ,Sl No ii) (Coliform Count)	-
Clause 3.5,Table 2 ,Sl No iii) (Staphylococcus aureus(Coagulase positive))	-
Clause 3.5,Table 2 ,Sl No iv) (Yeast and mould count)	-
Clause 3.5,Table 2 ,Sl No v) (Salmonella sp)	-
Clause 3.5,Table 2 ,Sl No vi) (Listeria monocytogenes)	-
Clause 3.5,Table 2 ,Sl No vii) (Bacillus cereus)	-
Clause 3.5,Table 2 ,Sl No viii) (Sulphite reducing clostridia)	-
Clause 3.5,Table 2 ,Sl No ix) (E. coli)	-
Clause 3.5,Table 1 ,Sl No iv) (Milk protein in milk solids not fat)	-
Clause 3.5,Table 1 ,Sl No v) (Insolubility index)	-
Clause 3.5,Table 1 ,Sl No vi) (Total ash(on dry basis))	-
Clause 3.5,Table 1 ,Sl No vii) (Titratable acidity (lactic acid),)	-
Clause 3.5,Table 1 ,Sl No viii) (Scorched particle)	-
Clause 3.7,Table 3, Sl No i) (Lead)	-
Clause 3.7,Table 3 ,Sl No ii) (Arsenic)	-
Clause 3.7,Table 3,Sl No iii) (Aflaoxin)	-
3.1 (Discription)	-
3.2 (Flavour & Taste - IS 1165)	-
Clause 3.5,Table 1 ,Sl No iv) (Milk protein in milk solids not fat)	-
Clause 3.5,Table 1 ,Sl No v) (Insolubility index)	-
Clause 3.5,Table 1 ,Sl No vi) (Total ash(on dry basis))	-
Clause 3.5,Table 1 ,Sl No vii) (Titratable acidity (lactic acid),)	-
Clause 3.5,Table 1 ,Sl No viii) (Scorched particle)	-

-
500 gm x 3 Excluding 1- Lead 2- Arsenic 3-Aflatoxin M1 4- Melamine

10096

Testtex India Laboratories Private Limited, Noida

8138306

IS 5676 (1995)

Moulded solid rubber soles and heels - SpecificatlOn (Second Revision)

Moulded solid rubber soles and heels

9600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5/5.3/5.3.1(REQUIREMENTS- Construction)	-	300	-
5/5.1(REQUIREMENTS-General)	-	0	-
5/5.2- Fig. 1 to 5(REQUIREMENTS-Design)	-	0	-
5/5.5- Table1(REQUIREMENTS-Thickness)	-	300	-
5/5.6/5.6.1(REQUIREMENTS-Channel)	-	300	-
5/5.7- Table2(REQUIREMENTS- Physical Requirements- as per IS 3400 (Part 1, Part 2, Part 4, Part 9, Part 10, Part 16))	-	8700	IS 3400 Part 1, 2, 4, 9, 10, 16)
5/5.3/5.3.1(REQUIREMENTS- Construction)	-	0	Repeated
5/5.1(REQUIREMENTS-General)	-	0	Repeated
5/5.2- Fig. 1 to 5(REQUIREMENTS-Design)	-	0	Repeated
5/5.5- Table1(REQUIREMENTS-Thickness)	-	0	Repeated
5/5.6/5.6.1(REQUIREMENTS-Channel)	-	0	Repeated
5/5.7- Table2(REQUIREMENTS- Physical Requirements- as per IS 3400 (Part 1, Part 2, Part 4, Part 9, Part 10, Part 16))	-	0	Repeated
5/5.3/5.3.1(REQUIREMENTS- Construction)	-	0	Repeated
5/5.1(REQUIREMENTS-General)	-	0	Repeated
5/5.2- Fig. 1 to 5(REQUIREMENTS-Design)	-	0	Repeated
5/5.5- Table1(REQUIREMENTS-Thickness)	-	0	Repeated
5/5.6/5.6.1(REQUIREMENTS-Channel)	-	0	Repeated
5/5.7- Table2(REQUIREMENTS- Physical Requirements- as per IS 3400 (Part 1, Part 2, Part 4, Part 9, Part 10, Part 16))	-	0	Repeated
6(Marking and packing)	-	0	Repeated
8.1(Test methods)	-	0	Repeated
8.3(Measurement of thickness)	-	0	Repeated
Cl.6.1,6.2,6.3(Marking and packing)	-	0	Repeated
8.1(Test Methods)	-	0	Repeated
Cl.8.3(Measurement of thickness ")	-	0	Repeated
5.5 (Amendment 1)(Thickness)	-	0	Repeated
5.7 Table 2 i) (Amendment 1)(Relative Density)	-	0	Repeated
5.7, Table 2 ii) (Amendment 1)(Hardness, degree, Shore A)	-	0	Repeated
5.7, Table 2 iv) (Amendment 1)(Abrasion Resistance at applied force of 10 N)	-	0	Repeated
5.7, Table 2 v) (Amendment 1)(Tensile strength)	-	0	Repeated
5.7, Table 2 vi) (Amendment 1)(Elongation at break)	-	0	Repeated
5.7, Table 2 vii) (Amendment 1)(Tear strength (average force))	-	0	Repeated
5.7, Table 2 iii) (Amendment 1)(Flexing resistance)	-	0	Repeated

-
Included w.e.f. 03.10.2024

10097

Bombay Textiles Research Association (BTRA), Mumbai

7130206

IS 16392 (2015)

Geosynthetics - Geotextiles for permanent erosion control in hard armor systems - Specification

224600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4.3 Table 1 (i) (g)(Abrasion strength)	-	3000	-
Cl 4.3 Table 1 (i) (d)(Grab strength, N)	-	1500	-
Cl 4.3 Table 1 (i) (e)(Sewn seam strength, N)	-	1500	-
Cl 4.3 Table 1 (i) (f)(Trapezidal tear strength, N)	-	1500	-
Cl 4.3 Table 1 (i) (h)(CBR puncture strength, N)	-	2700	-
Cl 4.3 Table 1 (i) (j)(Burst strength, kPa)	-	1000	-
Cl 4.3 Table 1 (i) (a)(Type of geotextile)	-	0	-
Cl 4.3 Table 1 (i) (b)(Roll length, m)	-	500	-
Cl 4.3 Table 1 (i) (c)(Roll width, m)	-	500	-
Cl 4.3 Table 1 (ii) (b)(Permitttivity, s-1 , Course)	-	2100	-
Cl 4.3 Table 1 (ii) (c)(Apparent Opening Size (AOS), mm, Course)	-	750	-
Cl 4.3 Table 1 (iii) (c)(Resistance to installation damage, Percent retained Strength)	-	150000	-
Cl 4.3 Table 1 (iii) (d)(Ultraviolet stability at 500h, retained strength, percent of original strength)	-	52000	-
Cl 4.3 Table 1 (ii) (b)(Permitttivity, s-1 , Medium)	-	0	COVERED IN EARLIER CLAUSE
Cl 4.3 Table 1 (ii) (b)(Permitttivity, s-1 , Fine)	-	0	COVERED IN EARLIER CLAUSE
Cl 4.3 Table 1 (ii) (c)(Apparent Opening Size (AOS), mm, Medium)	-	0	COVERED IN EARLIER CLAUSE
Cl 4.3 Table 1 (ii) (c)(Apparent Opening Size (AOS), mm, Fine)	-	0	COVERED IN EARLIER CLAUSE
Cl 4.3 Table 1 (i) (g)(Abrasion strength)	-	0	-
Cl 4.3 Table 1 (i) (d)(Grab strength, N)	-	0	-
Cl 4.3 Table 1 (i) (e)(Sewn seam strength, N)	-	0	-
Cl 4.3 Table 1 (i) (f)(Trapezidal tear strength, N)	-	0	-
Cl 4.3 Table 1 (i) (h)(CBR puncture strength, N)	-	0	-
Cl 4.3 Table 1 (i) (j)(Burst strength, kPa)	-	0	-
Cl 4.3 Table 1 (i) (a)(Type of geotextile)	-	500	-
Cl 4.3 Table 1 (i) (b)(Roll length, m)	-	0	-
Cl 4.3 Table 1 (i) (c)(Roll width, m)	-	0	-
Cl 4.3 Table 1 (ii) (b)(Permitttivity, s-1 , Course)	-	0	-
Cl 4.3 Table 1 (ii) (c)(Apparent Opening Size (AOS), mm, Course)	-	0	-
Cl 4.3 Table 1 (iii) (c)(Resistance to installation damage, Percent retained Strength)	-	0	-
Cl 4.3 Table 1 (iii) (d)(Ultraviolet stability at 500h, retained strength, percent of original strength)	-	0	-
Cl 4.3 Table 1 (ii) (b)(Permitttivity, s-1 , Medium)	-	0	-
Cl 4.3 Table 1 (ii) (b)(Permitttivity, s-1 , Fine)	-	0	-
Cl 4.3 Table 1 (ii) (c)(Apparent Opening Size (AOS), mm, Medium)	-	0	-
Cl 4.3 Table 1 (ii) (c)(Apparent Opening Size (AOS), mm, Fine)	-	0	-
4.2, Amd-1(Carbon Black content & Dispersion)	-	750	-
Cl 4.3 Table 1 (iii) (a) of Amd-1(Resistance to installation damage, percent retained strength, SC/SW/GP)	-	0	-
Cl 4.3 Table 1 (i) (g)(Abrasion strength)	-	0	-
Cl 4.3 Table 1 (i) (d)(Grab strength, N)	-	0	-
Cl 4.3 Table 1 (i) (e)(Sewn seam strength, N)	-	0	-
Cl 4.3 Table 1 (i) (f)(Trapezidal tear strength, N)	-	0	-
Cl 4.3 Table 1 (i) (h)(CBR puncture strength, N)	-	0	-
Cl 4.3 Table 1 (i) (j)(Burst strength, kPa)	-	0	-
Cl 4.3 Table 1 (i) (a)(Type of geotextile)	-	0	-
Cl 4.3 Table 1 (i) (b)(Roll length, m)	-	0	-
Cl 4.3 Table 1 (i) (c)(Roll width, m)	-	0	-
Cl 4.3 Table 1 (ii) (b)(Permitttivity, s-1 , Course)	-	0	-
Cl 4.3 Table 1 (ii) (c)(Apparent Opening Size (AOS), mm, Course)	-	0	-
Cl 4.3 Table 1 (iii) (c)(Resistance to installation damage, Percent retained Strength)	-	0	-
Cl 4.3 Table 1 (iii) (d)(Ultraviolet stability at 500h, retained strength, percent of original strength)	-	0	-
Cl 4.3 Table 1 (ii) (b)(Permitttivity, s-1 , Medium)	-	0	-
Cl 4.3 Table 1 (ii) (b)(Permitttivity, s-1 , Fine)	-	0	-
Cl 4.3 Table 1 (ii) (c)(Apparent Opening Size (AOS), mm, Medium)	-	0	-
Cl 4.3 Table 1 (ii) (c)(Apparent Opening Size (AOS), mm, Fine)	-	0	-
4.2, Amd-1(Carbon Black content & Dispersion)	-	0	-
Cl 4.3 Table 1 (iii) (a) of Amd-1(Resistance to installation damage, percent retained strength, SC/SW/GP)	-	0	-
4.2, Amd-1(Type of polymer)	-	3300	-
4.2, Amd-1(Isophthalic acid content)	-	3000	-

-
Included w.e.f 07.01.2025

10098

Bombay Textiles Research Association (BTRA), Mumbai

7130206

IS 16391 (2015)

Geosynthetics â€“ Geotextiles used in sub-grade separation in pavement structures â€“ Specification

225500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4.3 Table 1 (iii) (d)(Ultraviolet stability at 500h, Retained strength, Percent of original strength)	-	52000	-
Cl 4.3 Table 1 (i) (a)(Type of geotextile)	-	500	-
Cl 4.3 Table 1 (i) (b)(Roll length, m, Min)	-	500	-
Cl 4.3 Table 1 (i) (c)(Roll width, m)	-	500	-
Cl 4.3 Table 1 (i) (d)(Grab strength, N)	-	1500	-
Cl 4.3 Table 1 (i) (e)(Sewn seam strength, N)	-	1500	-
Cl 4.3 Table 1 (i) (f)(Trapezidal tear strength, N)	-	1500	-
Cl 4.3 Table 1 (i) (g)(CBR puncture strength, N)	-	2700	-
Cl 4.3 Table 1 (i) (h)(Burst strength, kPa)	-	1000	-
Cl 4.3 Table 1 (ii) (a)(Permitttivity, s-1)	-	2100	-
Cl 4.3 Table 1 (ii) (b)(Apparent opening size (AOS), mm)	-	750	-
Cl 4.3 Table 1 (iii) (c)(Resistance to installation damage, Percent retained strength, SC/SW/GP)	-	150000	-
Cl 4.3 Table 1 (iii) (d)(Ultraviolet stability at 500h, Retained strength, Percent of original strength)	-	0	-
Cl 4.3 Table 1 (i) (a)(Type of geotextile)	-	0	-
Cl 4.3 Table 1 (i) (b)(Roll length, m, Min)	-	0	-
Cl 4.3 Table 1 (i) (c)(Roll width, m)	-	0	-
Cl 4.3 Table 1 (i) (d)(Grab strength, N)	-	0	-
Cl 4.3 Table 1 (i) (e)(Sewn seam strength, N)	-	0	-
Cl 4.3 Table 1 (i) (f)(Trapezidal tear strength, N)	-	0	-
Cl 4.3 Table 1 (i) (g)(CBR puncture strength, N)	-	0	-
Cl 4.3 Table 1 (i) (h)(Burst strength, kPa)	-	0	-
Cl 4.3 Table 1 (ii) (a)(Permitttivity, s-1)	-	0	-
Cl 4.3 Table 1 (ii) (b)(Apparent opening size (AOS), mm)	-	0	-
Cl 4.3 Table 1 (iii) (c)(Resistance to installation damage, Percent retained strength, SC/SW/GP)	-	0	-
4.1(Geosynthetic materials)	-	4200	-
4.2(Carbon black and carbon black dispersion)	-	750	-
Cl 4.3 Table 1 (iii) (a) of Amd-1(Resistance to installation damage, Percent retained strength, SC/SW/GP)	-	0	-
Cl 4.3 Table 1 (iii) (b) of Amd-1(b) Ultraviolet stability at 500h, Retained strength, Percent of original strength, Min)	-	0	-
4.2, Amd-1(Carbon Black Content)	-	0	-
Cl 4.3 Table 1 (iii) (d)(Ultraviolet stability at 500h, Retained strength, Percent of original strength)	-	0	-
Cl 4.3 Table 1 (i) (a)(Type of geotextile)	-	0	-
Cl 4.3 Table 1 (i) (b)(Roll length, m, Min)	-	0	-
Cl 4.3 Table 1 (i) (c)(Roll width, m)	-	0	-
Cl 4.3 Table 1 (i) (d)(Grab strength, N)	-	0	-
Cl 4.3 Table 1 (i) (e)(Sewn seam strength, N)	-	0	-
Cl 4.3 Table 1 (i) (f)(Trapezidal tear strength, N)	-	0	-
Cl 4.3 Table 1 (i) (g)(CBR puncture strength, N)	-	0	-
Cl 4.3 Table 1 (i) (h)(Burst strength, kPa)	-	0	-
Cl 4.3 Table 1 (ii) (a)(Permitttivity, s-1)	-	0	-
Cl 4.3 Table 1 (ii) (b)(Apparent opening size (AOS), mm)	-	0	-
Cl 4.3 Table 1 (iii) (c)(Resistance to installation damage, Percent retained strength, SC/SW/GP)	-	0	-
4.1(Geosynthetic materials)	-	0	-
4.2(Carbon black and carbon black dispersion)	-	0	-
Cl 4.3 Table 1 (iii) (a) of Amd-1(Resistance to installation damage, Percent retained strength, SC/SW/GP)	-	0	-
Cl 4.3 Table 1 (iii) (b) of Amd-1(b) Ultraviolet stability at 500h, Retained strength, Percent of original strength, Min)	-	0	-
4.2, Amd-1(Carbon Black Content)	-	0	-
4.2(virgin polyester)	-	6000	-
Cl 4.3 Table 1 (iii) (d)(Ultraviolet stability at 500h, Retained strength, Percent of original strength)	-	0	-
Cl 4.3 Table 1 (i) (a)(Type of geotextile)	-	0	-
Cl 4.3 Table 1 (i) (b)(Roll length, m, Min)	-	0	-
Cl 4.3 Table 1 (i) (c)(Roll width, m)	-	0	-
Cl 4.3 Table 1 (i) (d)(Grab strength, N)	-	0	-
Cl 4.3 Table 1 (i) (e)(Sewn seam strength, N)	-	0	-
Cl 4.3 Table 1 (i) (f)(Trapezidal tear strength, N)	-	0	-
Cl 4.3 Table 1 (i) (g)(CBR puncture strength, N)	-	0	-
Cl 4.3 Table 1 (i) (h)(Burst strength, kPa)	-	0	-
Cl 4.3 Table 1 (ii) (a)(Permitttivity, s-1)	-	0	-
Cl 4.3 Table 1 (ii) (b)(Apparent opening size (AOS), mm)	-	0	-
Cl 4.3 Table 1 (iii) (c)(Resistance to installation damage, Percent retained strength, SC/SW/GP)	-	0	-
4.1(Geosynthetic materials)	-	0	-
4.2(Carbon black and carbon black dispersion)	-	0	-
Cl 4.3 Table 1 (iii) (a) of Amd-1(Resistance to installation damage, Percent retained strength, SC/SW/GP)	-	0	-
Cl 4.3 Table 1 (iii) (b) of Amd-1(b) Ultraviolet stability at 500h, Retained strength, Percent of original strength, Min)	-	0	-
4.2, Amd-1(Carbon Black Content)	-	0	-
4.2(virgin polyester)	-	0	-

-
-

10099

Testtex India Laboratories Private Limited, Noida

8138306

IS 6664 (1992)

Rubber microcellular sheets for soles and heels - Specification (First Revision)

Microcellular Rubber Sheets for Outsoles

8950 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4, Cl.4.1,4.1.1,4.1.2(Requirements)	-	0	-
Cl.4 Cl.4.1.3 And 8.3,Table1, i)(Relative density)	-	500	-
Cl.4.1.3 And 8.3,Table1, iii)(Hardness, Shore A durometer min)	-	500	-
Cl.4 Cl.4.1.3 And 8.3,Table1, iii)(Change in Hardness after ageing at 100±1°C for 24hr)	-	1500	-
Cl.4 Cl.4.1.3 And 8.3,Table1, iv)(Compression set at constant stress percent, Max)	-	1000	-
Cl.4 Cl.4.1.3 And 8.3,Table1, v)(Split tear strength, kg,Min)	-	1000	-
Cl.4 Cl.4.1.3 And 8.3,Table1, vi)(Room Temperature shrinkage at 27±2°C for 2weeks, percent, Max)	-	1000	-
Cl.4 Cl.4.1.3 And 8.3,Table 1, vi)(Heat shrinkage test at 100±1°C for 1 hour max)	-	1000	-
Cl.4 Cl.4.1.3 And 8.3,Table1, viii)(Water absorption , percent by mass, Max)	-	1000	-
Cl.4 Cl.4.1.3 And 8.3,Table 1, viii)(Flexing resistance: Maximum cut growth at 50 000 cycles)	-	1000	-
4.2(Flexing resistance )	-	0	Clause Repeated
4.2(Water absorption)	-	0	Wrong test description
4.2(Heat Shrinkage )	-	0	Clause Repeated
4.2(Shrinkage at room temp)	-	0	Clause Repeated
4.2(Split tear strength)	-	0	Clause Repeated
4.2(Compression set)	-	0	Clause Repeated
4.2(Hardness (Shore A))	-	0	Clause Repeated
4.2(Density )	-	0	Clause Repeated
4.2(Size & Thickness )	-	0	-
5, 5.1(Marking)	-	0	-
6, 6.1(Packing)	-	0	-
"Cl.4 ,Cl.4.1,4.1.1,4.1.2(Requirements ")	-	0	Clause Repeated
Cl.4.1.3 And 8.3,Table1(i) Relative density)	-	500	-
Cl.4.1.3 And 8.3,Table1(ii) Hardness, Shore A durometer min)	-	500	-
Cl.4.1.3 And 8.3,Table1(iii) Change in Hardness after ageing at 100±1°C for 24hr)	-	0	Clause Repeated
Cl.4.1.3 And 8.3,Table1(iv) Compression set at constant stress percent, Max)	-	1000	-
Cl.4.1.3 And 8.3,Table1(vi) Room Temperature shrinkage at 27±2°C for 2weeks, percent, Max)	-	0	Clause Repeated
Cl.4.1.3 And 8.3,Table 1 vi(Heat shrinkage test at 100±1°C for 1 hour max)	-	0	Clause Repeated
Cl.4.1.3 And 8.3,Table1(ix)Flexing resistance)	-	0	Clause Repeated
5, 5.1(Marking)	-	0	Clause Repeated
6, 6.1(Packing)	-	0	Clause Repeated
Cl.4.1.3 And 8.3,Table1(viii)Water absorption , percent by mass, Max)	-	0	Clause Repeated

-
Table-1 (Compression set at constant stress) scope restsricted to method B of Annex-D of IS 10702 Included along with Amendment No.1 w.e.f. 24.06.2024

10100

Adityapur Auto Cluster, Adityapur

5178506

IS 1786 (2008)

High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision)

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 9.4(Load In Other Direction From Bend)	-	12000	-
Cl 9.3(Load In One Direction)	-	12000	-
Cl 8.1(UTM)	-	12000	-
Cl 7.2(Weight)	-	12000	-
Cl 6.1(Length, Width & Thickness)	-	12000	-
Cl 5(Deformations and Surface Characteristics)	-	12000	-
Cl 9.4(Load In Other Direction From Bend)	-	12000	-
Cl 9.3(Load In One Direction)	-	12000	-
Cl 8.1(UTM)	-	12000	-
Cl 7.2(Weight)	-	12000	-
Cl 6.1(Length, Width & Thickness)	-	12000	-
Cl 5(Deformations and Surface Characteristics)	-	12000	-
Cl 9.4(Load In Other Direction From Bend)	-	12000	-
Cl 9.3(Load In One Direction)	-	12000	-
Cl 8.1(UTM)	-	12000	-
Cl 7.2(Weight)	-	12000	-
Cl 6.1(Length, Width & Thickness)	-	12000	-
Cl 5(Deformations and Surface Characteristics)	-	12000	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 CARBON +EQUIVELENT )	-	12000	-
4.1(Sulphur and phosphorous)	-	12000	-
4.1(CE)	-	12000	-
4.1( Nitrogen%)	-	12000	-
4.1(Ni)	-	12000	-
4.1(Mo)	-	12000	-
4.1(Cr)	-	12000	-
4.1( Ti)	-	12000	-
4.1(V)	-	12000	-
4.1( Nb)	-	12000	-
4.1( Aluminium %)	-	12000	-
4.1( Copper %)	-	12000	-
4.1(Silicon %)	-	12000	-
4.1(Sulphur %)	-	12000	-
4.1(Phosphorus %)	-	12000	-
4.1(Manganese %)	-	12000	-
4.1(Carbon %)	-	12000	-
Cl.9.4 & Cl. 9.4.1(Rebend test)	-	12000	-
Cl. 9.3, Table 4(Bend Test )	-	12000	-
Cl. 8.1 Table 3(Elongation, percentage)	-	12000	-
Cl. 8.1 Table 3(TS/YS ratio)	-	12000	-
Cl. 8.1 Table 3(Tensile Strength (TS))	-	12000	-
Cl. 8.1 Table 3(Yield Stress (YS))	-	12000	-
Cl. 7.2 Table -2 (Nominal Mass)	-	12000	-
Cl. 6.1(Nominal Size)	-	12000	-
Cl. 5 (Cl. 5 - Mean projected area of transverse ribs (1/3 of Ar))	-	12000	-
Cl. 5 (Cl.5 Mean area of ribs/unit length (Ar), )	-	12000	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR+PHOSPHUR)	-	12000	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 MANGANESE)	-	12000	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 NITROGEN)	-	12000	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 PHOSPHURS)	-	12000	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR)	-	12000	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 CARBON )	-	12000	-
Cl.4.2 of IS 1786 (Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12000	-
Cl.4.2 of IS 1786 (Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12000	-
Cl.4.2 of IS 1786 (Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12000	-
Cl.4.2 of IS 1786 (Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12000	-
Cl.4.2 of IS 1786 (Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12000	-
Cl.4.2 of IS 1786 (Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12000	-
Cl.4.2 of IS 1786 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12000	-
Cl.4.2 of IS 1786 (Grade:- Fe 415D,Fe 415S, Fe 500D,Fe 500S,Fe 550D)(Carbon Equivalent)	-	12000	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Sulphur & Phosphorous)	-	12000	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Phosphorous- IS 228)	-	12000	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Sulphur-IS 228)	-	12000	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Carbon-IS 228)	-	12000	-
8.18.1 Table 3(Total elongation at maximum force)	-	12000	-
Cl 5(Deformations and Surface Characteristics)	-	12000	-
5.7(PullOut (Bond Test))	-	12000	-
4.2(Niobium (Nb))	-	12000	-
4.2(Boron (B))	-	12000	-
Cl. 5.7(Average compressive strength of cubes at 28 days)	-	12000	-
Cl. 5.7(Bond Strength at 0.25 mm slip)	-	12000	-
Cl. 5.7(Date of testing of concrete cubes)	-	12000	-
Cl. 5.7(Date of casting of concrete cubes)	-	12000	-
Cl. 8.1 Table 3(TS/YS Ratio)	-	12000	-
Cl. 5.3 (b)(The ribs contributing the projected area - Transverse Ribs)	-	12000	-
Cl. 5.3 (a)(The ribs contributing the projected area - Longitudinal Ribs)	-	12000	-
Cl. 8.1 Table 3(Maximum Extension)	-	12000	-
Cl. 8.1 Table 3(Total Elongation at Maximum Force)	-	12000	-
Cl. 6.2, 6.3 Table 1(Gross Cross Sectional Area, A)	-	12000	-
Cl. 4.3(Visual Inspection.)	-	12000	-
Cl. 5.2(Surface Characteristics)	-	12000	-
Clause 9.4(Rebend Test)	-	12000	-
Clause 6.3(Effective Cross-sectional Area)	-	12000	-
Clause 8.1(Table 3)(Total Elongation at Maximum Force)	-	12000	-
Cl 9.4(Load In Other Direction From Bend)	-	12000	-
Cl 9.3(Load In One Direction)	-	12000	-
Cl 8.1(UTM)	-	12000	-
Cl 7.2(Weight)	-	12000	-
Cl 6.1(Length, Width & Thickness)	-	12000	-
Cl 5(Deformations and Surface Characteristics)	-	12000	-
Cl 5(Deformations and Surface Characteristics)	-	12000	-
Cl 6.1(Length, Width & Thickness)	-	12000	-
Cl 7.2(Weight)	-	12000	-
Cl 8.1(UTM)	-	12000	-
Cl 9.3(Load In One Direction)	-	12000	-
Cl 9.4(Load In Other Direction From Bend)	-	12000	-
13(Identification and marking)	-	12000	-
5.7(Pull-out test - IS:2770(P1))	-	12000	-
7.0 & 7.1(Specified lengths - SOP MT-23)	-	12000	-
8.0 & 8.1("Total elongation at maximum force on 5.65 vSo mm GL. ")	-	12000	-
4.3(Rolling and cold working of bars/wire)	-	12000	-
7.1(Specified length)	-	12000	-
9.1(Preparation of test sample)	-	12000	-
9.2(Tensile test,IS:1608(Pt1)-2018)	-	12000	-
9.5(Retest)	-	12000	-
12(Inspection)	-	12000	-
Clause 4.2 Note 2, Amendment 1 & 3(Nb+V+B+Ti)	-	12000	-
Clause 4.2 Note 3, Amendment 1 & 3(Cr+Cu+Ni+Mo+P)	-	12000	-
Clause 4.2, Amendment 3 Note 4("In order to ascertain whether sufficient quantities of nitrogen binding elements are present, following formula may be used, where all elements are in ppm. (N−120)< (Al free/10)+((Ti+V)/7)+(Nb/14)")	-	12000	-
1()	-	12000	-

28 Jun, 2027

-
scope restricted upto 40mm Exclusion: Pull out test

10101

Testtex India Laboratories Private Limited, Noida

8138306

IS 6719 (1972)

Solid Pvc Soles And Heels

4750 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 3.1,3.2,3.3,3.4,3.5(Material)	-	0	-
3.6 (i)(Relative density )	-	500	-
3.6 (ii)(Tensile Strength )	-	750	-
3.6 (iii)(Elongation at break, percent )	-	750	-
3.6 (iv)(Tear Strength a) Force Part b) Back Part )	-	750	-
3.6 (v)(Volatility, percent by means )	-	500	-
3.6 (vi)(Lead (as Pb) ppm)	-	1000	-
3.6.1(Hardness )	-	500	-
6 ,6.1,6.2,6.3(Test Method)	-	0	-
Cl. 6.4(Measurement of thickness)	-	0	-
Cl. 3.1,3.2,3.3,3.4,3.5(Material)	-	0	-

-
Included along with Amendment No.1 w.e.f. 24.06.2024

10102

MICRO ENGINEERING AND TESTING LABORATORY OPC PRIVATE LIMITED, SONIPAT

9186006

IS 269 (2015)

Ordinary portland cement - Specification (Sixth Revision)

OPC 33/ OPC 43/ OPC 53/ OPC 43S/ OPC 53S

10500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1 Table-2 viii(Alkali content)	-	800	-
6.1 Table-2 vii(Chloride content)	-	800	-
6.1 Table-2 vi(Loss on ignition)	-	400	-
6.1 Table-2 v(Total Sulphur Content calculated as Sulphuric Anhydride)	-	600	-
6.1 Table-2 iv(Magnesia)	-	600	-
6.1 Table-2 iii.(Insoluble residue)	-	600	-
6.1 Table-2 ii.(Ratio of percentage of alumina to that of iron oxide)	-	600	-
6.1 Table-2 i.(Ratio of percentage of lime to percentage of silica, alumina and iron oxide)	-	2000	-
6 - Table - 1 viii(Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	800	-
6 - Table - 1 vii(Chloride content - Cl 4.13 of IS 4032:1985)	-	800	-
6 - Table - 1 vi(Loss on ignition - Cl 4.2 of IS 4032:1985)	-	400	-
6 - Table - 1 v(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-	600	-
6 - Table - 1 iv(Magnesia - Cl 4.8 of IS 4032:1985)	-	600	-
6 - Table - 1 iii(Insoluble residue - Cl 4.10 of IS 4032:1985)	-	600	-
6 - Table - 1 ii(Ratio of percentage of alumina to that of iron oxide - Cl 4 of IS 4032:1985)	-	600	-
6 - Table - 1 i(Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-	2000	-
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	750	-
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	750	-
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	750	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	750	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	750	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	750	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	750	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	750	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	750	-
7 Table-3 iii b(Setting Time Final)	-	500	-
7 Table-3 iii a(Setting Time Initial)	-	500	-
7 Table-3 ii b(Expansion after aeration)	-	800	-
7 Table-3 ii b(Expansion by Autoclave)	-	800	-
7 Table-3 ii a(Expansion after aeration)	-	800	-
7 Table-3 ii a(Expansion by Le Chatelier)	-	500	-
7 Table-3 i.(Fineness)	-	600	-
6.1 Table-2 i.(Ratio of percentage of lime to percentage of silica, alumina and iron oxide)	-	2000	-
6 - Table - 1 ii(Ratio of percentage of alumina to that of iron oxide - Cl 4 of IS 4032:1985)	-	600	-
6.1 Table-2 viii(Alkali content)	-	800	-
6.1 Table-2 vii(Chloride content)	-	800	-
6.1 Table-2 vi(Loss on ignition)	-	400	-
6.1 Table-2 v(Total Sulphur Content calculated as Sulphuric Anhydride)	-	600	-
6.1 Table-2 iv(Magnesia)	-	600	-
6.1 Table-2 iii.(Insoluble residue)	-	600	-
6.1 Table-2 ii.(Ratio of percentage of alumina to that of iron oxide)	-	600	-
6 - Table - 1 viii( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	800	-
6 - Table - 1 vii(Chloride content - Cl 4.13 of IS 4032:1985)	-	800	-
6 - Table - 1 vi(Loss on ignition - Cl 4.2 of IS 4032:1985)	-	400	-
6 - Table - 1 v(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-	600	-
6 - Table - 1 iv(Magnesia - Cl 4.8 of IS 4032:1985)	-	600	-
6 - Table - 1 i(Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-	2000	-
6.1 Table-2 viii(Alkali content)	-	800	-
6.1 Table-2 vii(Chloride content)	-	800	-
6.1 Table-2 vi(Loss on ignition)	-	400	-
6.1 Table-2 v(Total Sulphur Content calculated as Sulphuric Anhydride)	-	600	-
6.1 Table-2 iv(Magnesia)	-	600	-
6.1 Table-2 iii.(Insoluble residue)	-	600	-
6.1 Table-2 ii.(Ratio of percentage of alumina to that of iron oxide)	-	600	-
6.1 Table-2 i.(Ratio of percentage of lime to percentage of silica, alumina and iron oxide)	-	2000	-
6.1 Table-2 i.(Ratio of percentage of lime to percentage of silica, alumina and iron oxide)	-	2000	-
6.1 Table-2 ii.(Ratio of percentage of alumina to that of iron oxide)	-	600	-
6.1 Table-2 iii.(Insoluble residue)	-	600	-
6.1 Table-2 iv(Magnesia)	-	600	-
6.1 Table-2 v(Total Sulphur Content calculated as Sulphuric Anhydride)	-	600	-
6.1 Table-2 vi(Loss on ignition)	-	400	-
6.1 Table-2 vii(Chloride content)	-	800	-
5.1.1 Table 1 Sl. No. iv(Calcium Carbonate)	-	400	-
15.4(Requirments for systems implementing section 4)	-	0	N/A
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	750	-
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	750	-
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	750	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	750	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	750	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	750	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	750	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	750	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	750	-
7 Table-3 iii b(Setting Time Final)	-	500	-
7 Table-3 iii a(Setting Time Initial)	-	500	-
7 Table-3 ii b(Expansion after aeration)	-	800	-
7 Table-3 ii b(Expansion by Autoclave)	-	800	-
7 Table-3 ii a(Expansion by Le Chatelier)	-	500	-
7 Table-3 i.(Fineness)	-	600	-
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	750	-
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	750	-
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	750	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	750	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	750	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	750	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	750	-
7 Table-3 iii b(Setting Time Final)	-	500	-
7 Table-3 iii a(Setting Time Initial)	-	500	-
7 Table-3 ii b(Expansion after aeration)	-	800	-
7 Table-3 ii b(Expansion by Autoclave)	-	800	-
7 Table-3 ii a(Expansion after aeration)	-	800	-
7 Table-3 ii a(Expansion by Le Chatelier)	-	500	-
7 Table-3 i.(Fineness)	-	600	-
7 Table-3 i.(Fineness)	-	600	-
7 Table-3 ii a(Expansion by Le Chatelier)	-	500	-
7 Table-3 ii a(Expansion after aeration)	-	800	-
7 Table-3 ii b(Expansion by Autoclave)	-	800	-
7 Table-3 ii b(Expansion after aeration)	-	800	-
7 Table-3 iii a(Setting Time Initial)	-	500	-
7 Table-3 iii b(Setting Time Final)	-	500	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	750	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	750	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	750	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	750	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	750	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	750	-
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	750	-
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	750	-
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	750	-
6 - Table - 1 iii(Insoluble residue - Cl 4.10 of IS 4032:1985)	-	600	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	750	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	750	-
7 Table-3 ii a(Expansion after aeration)	-	800	-
7 Table-3 v(Transverse Strength - IS 4031 Part 8 (Optional))	-	0	N/A
7 Table-3 v(Transverse Strength - IS 4031 Part 8 (Optional))	-	0	N/A
7 Table-3 v(Transverse Strength - IS 4031 Part 8 (Optional))	-	0	N/A
7 Table-3 v(Transverse Strength - IS 4031 Part 8 (Optional))	-	0	N/A
7.1.8(Pump efficiency shall be as per 11.4)	-	0	N/A
Clause 7 Table 3, SI No. (v) (Compressive strength of Transverse Specimen, 672 ± 4 h)	-	0	N/A
Clause 7 Table 3, SI No. (v) (Compressive strength of Transverse Specimen, 168 ± 2 h)	-	0	N/A
Clause 7 Table 3, SI No. (v) (Compressive strength of Transverse Specimen, 72 ± 1 h)	-	0	N/A
Clause 7 Table 3, SI No. (v) (Transverse Strength, 672 ± 4 h)	-	0	N/A
Clause 7 Table 3, SI No. (v) (Transverse Strength, 168 ± 2 h)	-	0	N/A
Clause 7 Table 3, SI No. (v) (Transverse Strength, 72 ± 1 h)	-	0	N/A
11(Marking)	-	0	N/A
5(Manufacture)	-	0	N/A
9(Manufacture certificate)	-	0	N/A
13(Requirment for an originating system )	-	0	N/A
14(Requirment for an Reciving system )	-	0	N/A
15.2.1(Records characteristics)	-	0	N/A
15.2.3(Fixed length record )	-	0	N/A
15.2.4(Variable length record)	-	0	N/A
15.2.5(segmented records)	-	0	N/A
15.3(Attributes of record structured files)	-	0	N/A
10(Packing)	-	0	N/A
15.2.2(Measured data unit)	-	0	N/A

04 Jun, 2028

-
-

10103

Bharat Test House Pvt Ltd 1474 Sonipat Haryana

9135626

IS 15885 : PART 2 : SEC 9 (2011)

Safety of lamp control gear: Part 2 particular requirements: Sec 9 ballasts for discharge lamps (Excluding Fluorescent Lamps)

Ballasts For Discharge Lamps

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
21(Resistance to Corrosion)	-	5200	5% discount for BIS
20(Resistance to heat, fire and tracking )	-	6500	5% discount for BIS
19(Screws, current-carrying parts and Connections )	-	2000	5% discount for BIS
18(Creepage distances and Clearance )	-	1000	5% discount for BIS
17(Construction)	-	3000	5% discount for BIS
16(Fault Conditions)	-	2000	5% discount for BIS
15(High Voltage Impulse Testing)	-	2000	5% discount for BIS
14(Ballast Heating)	-	5000	5% discount for BIS
13(Thermal endurance test for windings )	-	8000	5% discount for BIS
12(Electric strength)	-	2000	5% discount for BIS
11(Moisture resistance and insulation)	-	10000	5% discount for BIS
10(Provisions for earthing)	-	1000	5% discount for BIS
9(Terminals)	-	1000	5% discount for BIS
8(Protection against accidental contact with live parts)	-	1000	5% discount for BIS
7(Marking)	-	200	5% discount for BIS
6(Classification)	-	100	5% discount for BIS

19 Mar, 2029

-
-

10104

Bharat Test House Pvt Ltd 1474 Sonipat Haryana

9135626

IS 15885 : PART 2 : SEC 8 (2011)

Safety of lamp control gear: Part 2 particular requirements: Sec 8 ballasts for fluorescent lamps

Ballasts For Fluorescent Lamps

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
21(Resistance to Corrosion)	-	5200	5% discount for BIS
20(Resistance to heat, fire and tracking )	-	6500	5% discount for BIS
19(Screws, current-carrying parts and Connections )	-	2000	5% discount for BIS
18(Creepage distances and Clearance )	-	1000	5% discount for BIS
17(Construction)	-	3000	5% discount for BIS
16(Fault Conditions)	-	2000	5% discount for BIS
15(High Voltage Impulse Testing)	-	2000	5% discount for BIS
14(Ballast Heating)	-	5000	5% discount for BIS
13(Thermal endurance test for windings )	-	8000	5% discount for BIS
12(Electric strength)	-	2000	5% discount for BIS
11(Moisture resistance and insulation)	-	10000	5% discount for BIS
10(Provisions for earthing)	-	1000	5% discount for BIS
9(Terminals)	-	1000	5% discount for BIS
8(Protection against accidental contact with live parts)	-	1000	5% discount for BIS
7(Marking)	-	200	5% discount for BIS
6(Classification)	-	1000	5% discount for BIS

19 Mar, 2029

-
-

10105

Bharat Test House Pvt Ltd 1474 Sonipat Haryana

9135626

IS 15885 : PART 2 : SEC 3 (2011)

Safety of lamp control gear: Part 2 particular requirements: Sec 3 ac supplied electronic ballasts for fluorescent lamps

Ac Supplied Electronic Ballasts For Fluorescent Lamps

42000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
21(Resistance to Corrosion)	-	5200	5% discount for BIS
20(Resistance to heat, fire and tracking )	-	2500	5% discount for BIS
19(Screws, current-carrying parts and Connections )	-	2000	5% discount for BIS
18(Creepage distances and Clearance )	-	1000	5% discount for BIS
17(Construction)	-	3000	5% discount for BIS
16(Abnormal Condition)	-	7000	5% discount for BIS
15(Protection of associated Components)	-	3000	5% discount for BIS
14(Fault Conditions)	-	2000	5% discount for BIS
13(Thermal endurance test for windings )	-	5000	5% discount for BIS
12(Electric strength)	-	2000	5% discount for BIS
11(Moisture resistance and insulation)	-	5000	5% discount for BIS
10(Provisions for earthing)	-	1000	5% discount for BIS
9(Terminals)	-	1000	5% discount for BIS
8(Protection against accidental contact with live parts)	-	1000	5% discount for BIS
7(Marking)	-	200	5% discount for BIS
6(Classification)	-	100	5% discount for BIS

19 Mar, 2029

-
-

10106

Spectro Analytical Labs Private Limited, Gautam Buddha Nagar

8130426

IS 16048 : Part 2 (2021)

SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES SECONDARY SEALED CELLS AND BATTERIES FOR PORTABLE APPLICATIONS PART 2: NICKEL-METAL HYDRIDE

300000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(Parameter measurement tolerances)	-	0	-
Cl-5.1(Cell designation)	-	0	-
Cl-5.3(Marking)	-	0	-
Cl-6.1.1(General)	-	0	-
Cl-6.1.2(Small prismatic cells)	-	0	-
Cl-6.1.3.1(Cells dimensionally interchangeable with primary cells)	-	0	-
Cl-6.1.3.2(cells not dimensionally interchangeable with primary cells)	-	0	-
Cl-6.2(Button cells)	-	0	-
Cl-6.3(9 V type nickel-metal hydride batteries)	-	0	-
Cl-7.1(General)	-	0	-
Cl-7.2(Charging procedure for test purposes)	-	15000	-
Cl-7.3.2.2(Discharge performance for cells at 20 °C)	-	15000	-
Cl-7.3.2.3(Discharge performance for batteries at 20 °C)	-	15000	-
Cl-7.3.2.4(Rated capacity (mAh) compliance test (example))	-	15000	-
Cl-7.3.3(Discharge performance at 0 °C)	-	15000	-
Cl-7.3.4(Discharge performance for rapid charge cells (R cells))	-	15000	-
Cl-7.4(Charge (capacity) retention)	-	10000	-
Cl-7.5.1.1(General)	-	0	-
Cl-7.5.1.2(Small prismatic, button and cylindrical cells not dimensionally interchangeable with primary cells)	-	20000	-
Cl-7.5.1.3.1(General)	-	15000	-
Cl-7.5.1.3.2(H or X cells)	-	5000	-
Cl-7.5.1.3.3(X cells)	-	5000	-
Cl-7.5.1.3.4(HR or XR cells)	-	5000	-
Cl-7.5.1.4(Cylindrical cells dimensionally interchangeable with primary cells)	-	5000	-
Cl-7.5.2.1(Small prismatic and button cells)	-	5000	-
Cl-7.5.2.2(L, M, H or X cylindrical cells)	-	0	-
Cl-7.5.2.3(LT, MT or HT cylindrical cells)	-	0	-
Cl-7.5.2.4(JT cylindrical cells)	-	0	-
Cl-7.5.2.5(LU, MU or HU cylindrical cells)	-	0	-
Cl-7.7.1(Small prismatic, L, M, H, X, LS or MS cylindrical, and button cells)	-	0	-
Cl-7.7.2(LT/LU, MT/MU or HT/HU cylindrical cells)	-	0	-
Cl-7.7.3(J cylindrical cells)	-	0	-
Cl-7.7.4(JT cylindrical cells)	-	0	-
Cl-7.7.5(R cylindrical cells)	-	0	-
Cl-7.8(Safety device operation)	-	0	-
Cl-7.9(Surface temperature limitation device operation (for S cell only))	-	0	-
Cl-7.10.1(Button cells or batteries, small prismatic cells or batteries, cylindrical cells or batteries)	-	0	-
Cl-7.10.2(2 Button cells or batteries, small prismatic cells or batteries, cylindrical cells or batteries (high recovery type))	-	0	-
Cl-7.11(Charge acceptance at +55 °C for LT, MT or HT cylindrical cells)	-	5000	-
Cl-7.12(Trickle charge acceptance for JT cylindrical cells)	-	5000	-
Cl-7.13.2(Measurement of the internal AC resistance)	-	2000	-
Cl-7.13.3(Measurement of the internal DC resistance)	-	2000	-
Cl-8 (Cl- 4.1 of IEC 61959(Vibration test)	-	5000	-
Cl-8 (Cl- 4.1 of IEC 61959(Open circuit voltages)	-	2000	-
Cl-8 (Cl- 4.2 of IEC 61959(Free fall test (cells and hard pack batteries only))	-	2000	-
Cl-8 (Cl- 4.2 of IEC 61959(Height of fall as a function of weight)	-	2000	-
Cl-8 (Cl- 5 of IEC 61959(Type approval)	-	0	-
Cl-9 (Cl- 8.1 of IEC 62133(General)	-	0	-
Cl-9 (Cl- 8.2 of IEC 62133(Small cell and battery safety information)	-	0	-
Cl-10.2.1(Type approval for small prismatic cells and button cells)	-	0	-
Cl-10.2.2(Type approval for cylindrical cells)	-	0	-
Cl-10.2.3(Type approval for batteries)	-	0	-
Cl-10.3(Batch acceptance)	-	0	-
Cl-4(Parameter measurement tolerances)	-	0	-
Cl-5.1(Cell designation)	-	0	-
Cl-5.3(Marking)	-	0	-
Cl-6.1.1(General)	-	0	-
Cl-6.1.2(Small prismatic cells)	-	0	-
Cl-6.1.3.1(Cells dimensionally interchangeable with primary cells)	-	0	-
Cl-6.1.3.2(cells not dimensionally interchangeable with primary cells)	-	0	-
Cl-6.2(Button cells)	-	5000	-
Cl-6.3(9 V type nickel-metal hydride batteries)	-	5000	-
Cl-7.1(General)	-	5000	-
Cl-7.2(Charging procedure for test purposes)	-	5000	-
Cl-7.3.2.2(Discharge performance for cells at 20 °C)	-	5000	-
Cl-7.3.2.3(Discharge performance for batteries at 20 °C)	-	5000	-
Cl-7.3.2.4(Rated capacity (mAh) compliance test (example))	-	5000	-
Cl-7.3.3(Discharge performance at 0 °C)	-	5000	-
Cl-7.3.4(Discharge performance for rapid charge cells (R cells))	-	0	-
Cl-7.4(Charge (capacity) retention)	-	0	-
Cl-7.5.1.1(General)	-	0	-
Cl-7.5.1.2(Small prismatic, button and cylindrical cells not dimensionally interchangeable with primary cells)	-	0	-
Cl-7.5.1.3.1(General)	-	0	-
Cl-7.5.1.3.2(H or X cells)	-	0	-
Cl-7.5.1.3.3(X cells)	-	0	-
Cl-7.5.1.3.4(HR or XR cells)	-	0	-
Cl-7.5.1.4(Cylindrical cells dimensionally interchangeable with primary cells)	-	0	-
Cl-7.5.2.1(Small prismatic and button cells)	-	0	-
Cl-7.5.2.2(L, M, H or X cylindrical cells)	-	0	-
Cl-7.5.2.2(L, M, H or X cylindrical cells)	-	0	-
Cl-7.5.2.3(LT, MT or HT cylindrical cells)	-	0	-
Cl-7.5.2.4(JT cylindrical cells)	-	0	-
Cl-7.5.2.5(LU, MU or HU cylindrical cells)	-	0	-
Cl-7.7.1(Small prismatic, L, M, H, X, LS or MS cylindrical, and button cells)	-	0	-
Cl-7.7.2(LT/LU, MT/MU or HT/HU cylindrical cells)	-	0	-
Cl-7.7.3(J cylindrical cells)	-	0	-
Cl-7.7.4(JT cylindrical cells)	-	0	-
Cl-7.7.5(R cylindrical cells)	-	0	-
Cl-7.8(Safety device operation)	-	0	-
Cl-7.9(Surface temperature limitation device operation (for S cell only))	-	0	-
Cl-7.10.1(Button cells or batteries, small prismatic cells or batteries, cylindrical cells or batteries)	-	5000	-
Cl-7.10.2(2 Button cells or batteries, small prismatic cells or batteries, cylindrical cells or batteries (high recovery type))	-	5000	-
Cl-7.11(Charge acceptance at +55 °C for LT, MT or HT cylindrical cells)	-	5000	-
Cl-7.12(Trickle charge acceptance for JT cylindrical cells)	-	5000	-
Cl-7.13.2(Measurement of the internal AC resistance)	-	2000	-
Cl-7.13.3(Measurement of the internal DC resistance)	-	2000	-
Cl-8 (Cl- 4.1 of IEC 61959)(Vibration test)	-	5000	-
Cl-8 (Cl- 4.2 of IEC 61959)(Free fall test (cells and hard pack batteries only))	-	5000	-
Cl. 9 (Cl. 7.2.1 of IEC 62133)(Low rate charging)	-	5000	-
Cl. 9 (Cl. 7.2.2 of IEC 62133)(Vibration)	-	5000	-
Cl. 9 (Cl. 7.2.3 of IEC 62133)(Case stress)	-	5000	-
Cl. 9 (Cl. 7.2.4 of IEC 62133)(Temperature cycling)	-	5000	-
Cl. 9 (Cl. 7.3.1 of IEC 62133)(Incorrect installation)	-	5000	-
Cl. 9 (Cl. 7.3.2 of IEC 62133)(External short circuit)	-	5000	-
Cl. 9 (Cl. 7.3.3 of IEC 62133)(Free fall)	-	2000	-
Cl. 9 (Cl. 7.3.4 of IEC 62133)(Mechanical shock)	-	5000	-
Cl. 9 (Cl. 7.3.5 of IEC 62133)(Thermal abuse)	-	5000	-
Cl. 9 (Cl. 7.3.6 of IEC 62133)(Crush)	-	5000	-
Cl. 9 (Cl. 7.3.7 of IEC 62133)(Low pressure)	-	5000	-
Cl. 9 (Cl. 7.3.8 of IEC 62133)(Overcharge)	-	5000	-
Cl. 9 (Cl. 7.3.9 of IEC 62133)(Forced discharge)	-	5000	-
Cl-9 (Cl- 8.1 of IEC 62133)(General)	-	0	-
Cl-9 (Cl- 8.2 of IEC 62133(Small cell and battery safety information)	-	0	-
10(Type approval and batch acceptance)	-	0	-

04 Jan, 2027

-
Included w.e.f. 25.04.2024

10107

Testtex India Laboratories Private Limited, Noida

8138306

IS 15298 : part 4 (2017)

Personal protective equipment: Part 4 occupational footwear (Second Revision)

Occupational Footwear

54200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table 1(CLASS I)	-	200	-
Table 1(CLASS II)	-	200	-
5.2.2.1(General)	-	500	-
5.2.2.2(Height of upper)	-	300	-
5.2.2.3(Seat region)	-	300	-
5.3.2.1(Construction)	-	300	-
5.3.1.2(Upper/outsole bond strength)	-	700	-
5.3.2.2(Leakproofness)	-	500	-
5.3.2.3(Specific ergonomic features )	-	1000	-
5.3.2.5(Innocuousness )	-	26500	-
5.4.2.1(Upper)	-	300	-
5.4.2.2(Thickness )	-	300	-
5.4.2.3(Tear strenth)	-	500	-
5.4.2.4(Tensile properties)	-	500	-
5.4.2.5(Flexing resistance )	-	1000	-
5.4.2.6(Water vapour permeability and coefficient )	-	700	-
5.4.2.7(pH value )	-	500	-
5.4.2.8(Hydrolysis)	-	3500	-
5.4.2.9(Chromium VI content )	-	750	-
5.5.2.1(Tear strength )	-	500	-
5.5.2.2(Abrasion resistance )	-	700	-
5.5.2.3(Water vapour permeability and coefficient )	-	700	-
5.5.2.4(pH value )	-	500	-
5.5.2.5(Chromium VI content )	-	750	-
5.6(Tongue )	-	0	-
5.6.2.1(Tear strength )	-	500	-
5.6.2.2(pH value )	-	500	-
5.6.2.3(Chromium VI content )	-	750	-
5.7.2.1(Insole and insock )	-	300	-
5.7.2.2(Insole and insock )	-	500	-
5.7.2.3(Water absorption and desorption )	-	500	-
5.7.4.1(Abrasion resistance )	-	400	-
5.7.4.2(Abrasion resistance )	-	700	-
5.7.2.5(Chromium VI content )	-	750	-
5.8.2.1(Outsole)	-	0	-
5.8.1.1(Thickness )	-	300	-
5.8.1.2(Cleated area )	-	300	-
5.8.1.3(Cleat height)	-	300	-
5.8.2.2(Tear strength )	-	500	-
5.8.2.3(Abrasion resistance )	-	700	-
5.8.2.4(Flexing resistance )	-	700	-
5.8.2.5(Hydrolysis )	-	3500	-
5.8.2.6(Interlayer bond strength )	-	700	-
6.2.1.1(Metallic anti-penetration insert )	-	1000	-
6.2.1.1.2(Non-metallic anti-penetration insert used as an insole)	-	1000	-
6.2.1.2(Construction)	-	200	-
6.2.1.3(Dimensions )	-	300	-
6.2.1.4(Flex resistance of penetration-resistant inserts )	-	2500	-
6.2.1.5.1(Corrosion resistance of penetration-resistant metallic inserts)	-	500	-
6.2.1.5.2(Penetration-resistant non-metallic inserts)	-	1000	-
6.2.2.1(Conductive footwear)	-	1000	-
6.2.2.2(Antistatic footwear)	-	1000	-
6.2.3.1(Heat insulation of sole complex )	-	700	-
6.2.3.2(Cold insulation of sole complex)	-	700	-
6.2.2.4(Energy absorption of seat region )	-	2000	-
6.2.2.5(Water resistance )	-	500	-
6.2.7.1(Cut resistance foot wear)	-	0	-
6.2.7.2(Cut resistance foot wear)	-	0	-
6.2.7.3(Resistance to cutting)	-	2500	-
6.2.7.4(Pentration resistance)	-	1000	-
6.3.2.2(Upper- water penetration)	-	1000	-
6.4.2.1(Resistance to hot contact)	-	700	-
6.4.2.2(Resistance to fuel oil)	-	700	-
7(a)(Marking)	-	0	-
7(b)(Marking)	-	0	-
7(c)(Marking)	-	0	-
7(d)(Marking)	-	0	-
7(e)(Marking)	-	0	-
7(e)(Marking)	-	0	-
Table 1(CLASS I)	-	0	Clause Repeated
Table 1(CLASS II)	-	0	Clause Repeated
5.2.2.1(General)	-	0	Clause Repeated
5.2.2.2(Height of upper)	-	0	Clause Repeated
5.2.2.3(Seat region)	-	0	Clause Repeated
5.3.2.1(Construction)	-	0	Clause Repeated
5.3.1.2(Upper/outsole bond strength)	-	0	Clause Repeated
5.3.2.2(Leakproofness)	-	0	Clause Repeated
5.3.2.3(Specific ergonomic features )	-	0	Clause Repeated
5.3.2.5(Innocuousness )	-	0	Clause Repeated
5.4.2.1(Upper)	-	0	Clause Repeated
5.4.2.2(Thickness )	-	0	Clause Repeated
5.4.2.3(Tear strenth)	-	0	Clause Repeated
5.4.2.4(Tensile properties)	-	0	Clause Repeated
5.4.2.5(Flexing resistance )	-	0	Clause Repeated
5.4.2.6(Water vapour permeability and coefficient )	-	0	Clause Repeated
5.4.2.7(pH value )	-	0	Clause Repeated
5.4.2.8(Hydrolysis)	-	0	Clause Repeated
5.4.2.9(Chromium VI content )	-	0	Clause Repeated
5.5.2.1(Tear strength )	-	0	Clause Repeated
5.5.2.2(Abrasion resistance )	-	0	Clause Repeated
5.5.2.3(Water vapour permeability and coefficient )	-	0	Clause Repeated
5.5.2.4(pH value )	-	0	Clause Repeated
5.5.2.5(Chromium VI content )	-	0	Clause Repeated
5.6(Tongue )	-	0	Clause Repeated
5.6.2.1(Tear strength )	-	0	Clause Repeated
5.6.2.2(pH value )	-	0	Clause Repeated
5.6.2.3(Chromium VI content )	-	0	Clause Repeated
5.7.2.1(Insole and insock )	-	0	Clause Repeated
5.7.2.2(Insole and insock )	-	0	Clause Repeated
5.7.2.3(Water absorption and desorption )	-	0	Clause Repeated
5.7.4.1(Abrasion resistance )	-	0	Clause Repeated
5.7.4.2(Abrasion resistance )	-	0	Clause Repeated
5.7.2.5(Chromium VI content )	-	0	Clause Repeated
5.8.2.1(Outsole)	-	0	Clause Repeated
5.8.1.1(Thickness )	-	0	Clause Repeated
5.8.1.2(Cleated area )	-	0	Clause Repeated
5.8.1.3(Cleat height)	-	0	Clause Repeated
5.8.2.2(Tear strength )	-	0	Clause Repeated
5.8.2.3(Abrasion resistance )	-	0	Clause Repeated
5.8.2.4(Flexing resistance )	-	0	Clause Repeated
5.8.2.5(Hydrolysis )	-	0	Clause Repeated
5.8.2.6(Interlayer bond strength )	-	0	Clause Repeated
6.2.1.1(Metallic anti-penetration insert )	-	0	Clause Repeated
6.2.1.1.2(Non-metallic anti-penetration insert used as an insole)	-	0	Clause Repeated
6.2.1.2(Construction)	-	0	Clause Repeated
6.2.1.3(Dimensions )	-	0	Clause Repeated
6.2.1.4(Flex resistance of penetration-resistant inserts )	-	0	Clause Repeated
6.2.1.5.1(Corrosion resistance of penetration-resistant metallic inserts)	-	0	Clause Repeated
6.2.1.5.2(Penetration-resistant non-metallic inserts)	-	0	Clause Repeated
6.2.2.1(Conductive footwear)	-	0	Clause Repeated
6.2.2.2(Antistatic footwear)	-	0	Clause Repeated
6.2.3.1(Heat insulation of sole complex )	-	0	Clause Repeated
6.2.3.2(Cold insulation of sole complex)	-	0	Clause Repeated
6.2.2.4(Energy absorption of seat region )	-	0	Clause Repeated
6.2.2.5(Water resistance )	-	0	Clause Repeated
6.2.7.1(Cut resistance foot wear)	-	0	Clause Repeated
6.2.7.2(Cut resistance foot wear)	-	0	Clause Repeated
6.2.7.3(Resistance to cutting)	-	0	Clause Repeated
6.2.7.4(Pentration resistance)	-	0	Clause Repeated
6.3.2.2(Upper- water penetration)	-	0	Clause Repeated
6.4.2.1(Resistance to hot contact)	-	0	Clause Repeated
6.4.2.2(Resistance to fuel oil)	-	0	Clause Repeated
7(a)(Marking)	-	0	Clause Repeated
7(b)(Marking)	-	0	Clause Repeated
7(c)(Marking)	-	0	Clause Repeated
7(d)(Marking)	-	0	Clause Repeated
7(e)(Marking)	-	0	Clause Repeated
7(e)(Marking)	-	0	Clause Repeated
5.3.4.1(Slip resistance)	-	2000	-
5.3.4.2(Slip resistance on ceramic tile floor with sodium lauryl sulphate (SLS) solution)	-	0	Inclusive in Clause 5.3.4.1
5.3.4.3(Slip resistance on steel floor with glycerine )	-	0	Inclusive in Clause 5.3.4.1
5.3.4.4(Slip resistance on ceramic tile floor with SLS and on steel floor with glycerine )	-	0	Inclusive in Clause 5.3.4.1

-
Included w.e.f. 03.10.2024 Exclusion: for all types of footwear except electrically insulated footwear, ankle protection footwear, Cl.5.3.2.5 innocuousness allergenic and carcinogenic disperse dyes

10108

Bharat Test House Pvt Ltd 1474 Sonipat Haryana

9135626

IS 15885 : PART 2 : SEC 1 (2011)

Safety of lamp control gear: Part 2 particular requirements: Sec 1 starting devices (Other Than Glow Starters)

Starters For Discharge Lamps

50050 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
22(Resistance to Corrosion)	-	5200	5% discount for BIS
21(Resistance to heat, fire and tracking)	-	6500	5% discount for BIS
20(Screws, current-carrying parts and Connections)	-	3000	5% discount for BIS
19(Creepage distances and Clearance )	-	1000	5% discount for BIS
18(Construction)	-	3000	5% discount for BIS
17(Mechanical Strength)	-	1000	5% discount for BIS
16(Pulse Voltage of Ignitors)	-	7000	5% discount for BIS
15(Heating of independent starting Devices)	-	3000	5% discount for BIS
14(Fault Conditions)	-	2000	5% discount for BIS
13(Thermal endurance test for windings )	-	8000	5% discount for BIS
12(Electric strength)	-	2000	5% discount for BIS
11(Moisture resistance and insulation)	-	5000	5% discount for BIS
10(Provisions for earthing)	-	1000	5% discount for BIS
9(Terminals)	-	1000	5% discount for BIS
8(Protection against accidental contact with live parts)	-	1000	5% discount for BIS
7(Marking)	-	250	5% discount for BIS
6(Classification)	-	100	5% discount for BIS

19 Mar, 2029

-
-

10109

Bharat Test House Pvt Ltd 1474 Sonipat Haryana

9135626

IS 15882 (2009)

Ballasts for discharge lamps (Excluding Tubular Fluorescent Lamps) - Performance requirements

Ballasts For Discharge Lamps

42500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
15(Electrical requirements for Ballasts for high-pressure sodium Vapour lamps)	-	5000	5% discount for BIS
14(Electrical requirements for Ballasts for metal halide lamps)	-	5000	5% discount for BIS
13(Electrical requirements for Ballasts for low-pressure sodium Vapour lamps)	-	5000	5% discount for BIS
12(Electrical requirements for ballasts For high-pressure mercury)	-	5000	5% discount for BIS
11(Ignitors)	-	12500	5% discount for BIS
10(Magnetic Screening)	-	2250	5% discount for BIS
9(Current Waveform)	-	3000	5% discount for BIS
8(Supply Current)	-	2500	5% discount for BIS
7(Circuit Power factor)	-	1500	5% discount for BIS
6(Ballasts designed to operate various supply voltages)	-	500	5% discount for BIS
5(Marking)	-	250	5% discount for BIS

19 Mar, 2029

-
-

10110

Bharat Test House Pvt Ltd 1474 Sonipat Haryana

9135626

IS 15518 : Part 1 (2004)

Safety requirements for incandescent lamps: Part 1 tungsten filament lamps for domestic and similar general lighting purposes

Incandescent Tungsten Filament Lamps for Domestic and

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.1(Mandatory Markings)	-	100	5% discount to BIS
4.2.2(Standard Mark)	-	100	5% discount to BIS
4.2.3(Dichroic Reflectorized (Cool Beam) Lamps and Bowl Mirror Lamps)	-	100	5% discount to BIS
4.2.4(Lamps with Operating Positions Limitations)	-	100	5% discount to BIS
4.3, Table 1(Lamp Cap)	-	800	5% discount to BIS
4.3, Table 1(Gauge)	-	800	5% discount to BIS
4.3.1(E14 Capped Lamps)	-	800	5% discount to BIS
4.4.1(Average Cap Temperature Rise)	-	5000	5% discount to BIS
4.4.2(Compliance)	-	5000	5% discount to BIS
4.4.1, 4.4.2, Table 2(Group Number)	-	5000	5% discount to BIS
4.4.1, 4.4.2, Table 2(Wattage (Note 1))	-	5000	5% discount to BIS
4.4.1, 4.4.2, Table 2(Bulb Shape)	-	5000	5% discount to BIS
4.4.1, 4.4.2, Table 2(t3, B15d)	-	5000	5% discount to BIS
4.4.1, 4.4.2, Table 2(t3, B22d)	-	5000	5% discount to BIS
4.4.1, 4.4.2, Table 2(t3, E12)	-	5000	5% discount to BIS
4.4.1, 4.4.2, Table 2(t3, E14)	-	5000	5% discount to BIS
4.4.1, 4.4.2, Table 2(t3, E27)	-	5000	5% discount to BIS
4.4.3(Batch Testing)	-	5000	5% discount to BIS
4.5.1(Resistance to Torque, Caps)	-	1000	5% discount to BIS
4.5.2(Resistance to Torque, Unused Lamps)	-	1000	5% discount to BIS
4.5.2, Table 3(Cap type)	-	1000	5% discount to BIS
4.5.2, Table 3(Torque Value)	-	1000	5% discount to BIS
4.5.3(Resistance to Heat)	-	1000	5% discount to BIS
4.5.3, Table 4(Cap type)	-	5000	5% discount to BIS
4.5.3, Table 4(Torque Value)	-	1000	5% discount to BIS
4.5.4(Heating Treatment Temperatures)	-	1000	5% discount to BIS
4.6(Insulation Resistance of B15d, B22d and E27/51 × 39 Capped Lamps and Other Lamps having Insulated Skirts)	-	1000	5% discount to BIS
4.7.1(Metal Parts Intended to be Insulated from Live Parts)	-	1100	5% discount to BIS
4.7.2(Bayonet Caps)	-	1100	5% discount to BIS
4.7.3(Edison Screw Caps)	-	1100	5% discount to BIS
4.8(Creepage Distances for B15d and B22d Capped Lamps)	-	500	5% discount to BIS
4.9(Safety at End of Life)	-	10000	5% discount to BIS
4.1(Interchangeability)	-	1000	5% discount to BIS
4.10, Table 5(Lamp Cap)	-	1000	5% discount to BIS
4.10, Table 5(Cap Dimensions to be Checked by the Gauges)	-	1000	5% discount to BIS
4.10, Table 5(Data Sheet)	-	1000	5% discount to BIS

19 Mar, 2029

-
-

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number