BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15361 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

991

Standard Testing and Research Lab

9197206

IS 1659 (2004)

Block boards - Specification (Fourth Revision)

All Grade

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.2.6(Spot test - Annexure L)	-	6000	-
9.2.5(Modulus of elasticity - MINIMUM INDIVIDUAL - Annexure K)	-	6000	-
9.2.5(Modulus of elasticity - AVERAGE - Annexure K)	-	6000	-
9.2.5(Modulus of rupture - MINIMUM INDIVIDUAL - Annexure K)	-	6000	-
9.2.5(Modulus of rupture - AVERAGE - Annexure K)	-	6000	-
9.2.4(Mycological Test [for MR grade only] - Annexure J)	-	6000	-
9.2.3(Adhesion of Plies - Annexure H)	-	6000	-
9.2.2 (Resistance to water - Annexure G, Annexure H [For MR Grade])	-	6000	-
9.2.2 (Resistance to water - Annexure G, Annexure H [For BWP grade])	-	6000	-
9.2.1(Dimensional Changes caused by humidity Change in local planeness - Annexure F)	-	6000	-
9.2.1(Dimensional Changes caused by humidity - Delamination - Annexure F)	-	6000	-
9.2.1(Dimensional Changes caused by humidity - Change in thickness - at 40% RH - Annexure F)	-	6000	-
9.2.1(Dimensional Changes caused by humidity - Change in Thickness - at 90% RH - Annexure F)	-	6000	-
9.2.1(Dimensional Changes caused by humidity - Change in Length - at 40% RH - Annexure F)	-	6000	-
9.2.1(Dimensional Changes caused by humidity - Change in Length - at 90% RH - Annexure F)	-	6000	-
7.3(Dimensional Requirements - Variation in thickness - Annexure E)	-	6000	-
7.3(Dimensional Requirements - Squareness - Annexure D)	-	6000	-
7.3(Dimensional Requirements - Edge Straightness - Annexure D)	-	6000	-
7.3(Dimensional Requirements - Thickness - Annexure E)	-	6000	-
7.3(Dimensional Requirements - Width - 8.1.4)	-	6000	-
7.3(Dimensional Requirements - Length - 8.1.4)	-	6000	-
8.1.3, 6.3.3, IS 1328(Visual Inspection - Permissible Defects - IS 1328 [test method for DECORATIVE type])	-	6000	-
8.1.3, 6.3.3, IS 303(Visual Inspection - Permissible Defects - IS 303 [test method for COMMERCIAL type])	-	6000	-
9.2.6 (mechanical)(Spot test - Annexure L)	-	6000	-
cl. 11(marking)	-	6000	-
cl. 11.1(marking - BIS certification marking)	-	6000	-
Cl-10(ADDITIONAL REQUIREMENTS FOR ECO-MARK)	-	6000	-
6.2(Core- Moisture & Width)	-	6000	-
6.3(Cross Bands and Faces- Moisture content)	-	6000	-
6.3.1(Thickness of cross band and face veneers)	-	6000	-
Cl-7.1(Thickness)	-	6000	-
Cl-7.2(Sizes)	-	6000	-

24 Feb, 2029

-
Exclusion: Except additional requirement for eco-mark test

992

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 2681 (1993)

Non - Ferrous metal sliding door bolts (Aldrops) for use with padlocks - Specification (Third Revision)

24400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 8.1(Brass sliding door bolts shall have satin finish or shall be polished or plated as specified by the purchaser)	-	1000	-
Cl. 8.2 (Ref. Cl. 11.1 of IS 1868:1996)( appearance and Colour - shall be free from visible defects on the significant surface(s) when viewed from an agreed distance)	-	2000	-
Cl. 8.2 (Ref. Cl.9 of IS 1868:1996)(Aluminium shall be anodized to a bright, natural, sat or satin finish or dyed. )	-	2000	-
Cl. 8.2 (Ref. Cl.9 of IS 1868:1996)(Anodinc casting thickness (Cl. 9.2 of IS 1868:1996))	-	2000	-
3(TYPES)	-	500	-
4(SIZES)	-	500	-
6.1-Total 2(DIMENSIONS AND TOLERANCES-A)	-	300	-
6.1-Total 2(DIMENSIONS AND TOLERANCES-B)	-	300	-
6.1-Total 2(DIMENSIONS AND TOLERANCES-C)	-	300	-
6.1-Total 2(DIMENSIONS AND TOLERANCES-D)	-	300	-
6.1-Total 2(DIMENSIONS AND TOLERANCES-E)	-	300	-
6.1-Total 2(DIMENSIONS AND TOLERANCES-F)	-	300	-
6.1-Total 2(DIMENSIONS AND TOLERANCES-G)	-	300	-
6.1-Total 2(DIMENSIONS AND TOLERANCES-H)	-	300	-
6.1-Total 2(DIMENSIONS AND TOLERANCES-J)	-	300	-
6.1-Total 2(DIMENSIONS AND TOLERANCES-K)	-	300	-
6.1-Total 2(DIMENSIONS AND TOLERANCES-L)	-	300	-
6.1-Total 2(DIMENSIONS AND TOLERANCES-M)	-	300	-
6.1-Total 2(DIMENSIONS AND TOLERANCES-N)	-	300	-
6.1-Total 2(DIMENSIONS AND TOLERANCES-Q)	-	300	-
6.1-Total 2(DIMENSIONS AND TOLERANCES-S)	-	300	-
6.1-Total 2(DIMENSIONS AND TOLERANCES-T)	-	300	-
6.1-Total 2(DIMENSIONS AND TOLERANCES-W)	-	300	-
6.1-Total 2(DIMENSIONS AND TOLERANCES-No. of Screw on Staple or Clip to accommodate Wood Screw N0 8)	-	1000	-
6.1-Table 3(DIMENSIONS AND TOLERANCES-A)	-	300	-
6.1-Table 3(DIMENSIONS AND TOLERANCES-B)	-	300	-
6.1-Table 3(DIMENSIONS AND TOLERANCES-C)	-	300	-
6.1-Table 3(DIMENSIONS AND TOLERANCES-D)	-	300	-
6.1-Table 3(DIMENSIONS AND TOLERANCES-E)	-	300	-
6.1-Table 3(DIMENSIONS AND TOLERANCES-F)	-	300	-
6.1-Table 3(DIMENSIONS AND TOLERANCES-G)	-	300	-
6.1-Table 3(DIMENSIONS AND TOLERANCES-H)	-	300	-
6.1-Table 3(DIMENSIONS AND TOLERANCES-J)	-	300	-
6.1-Table 3(DIMENSIONS AND TOLERANCES-K)	-	300	-
6.1-Table 3(DIMENSIONS AND TOLERANCES-L)	-	300	-
6.1-Table 3(DIMENSIONS AND TOLERANCES-M)	-	300	-
6.1-Table 3(DIMENSIONS AND TOLERANCES-Pin dia)	-	300	-
6.1-Table 3(DIMENSIONS AND TOLERANCES-R)	-	300	-
6.1-Table 3(DIMENSIONS AND TOLERANCES-T)	-	300	-
6.1-Table 3(DIMENSIONS AND TOLERANCES-U)	-	300	-
6.1-Table 3(DIMENSIONS AND TOLERANCES-No. of Screw on Staple or Clip to accommodate Wood Screw N0 8)	-	1000	-
7.1(MANUFACTURE-General)	-	400	-
7.1(MANUFACTURE-General)	-	400	-
7.1(MANUFACTURE-General)	-	400	-
7.1(MANUFACTURE-General)	-	400	-
7.1(MANUFACTURE-General)	-	400	-
7.2(MANUFACTURE-Brass Sliding Door Bolts or Aluminium Alloy Sliding Door Bolts)	-	500	-
7.2(MANUFACTURE-Brass Sliding Door Bolts or Aluminium Alloy Sliding Door Bolts)	-	499.97	-
8.1(FINISH)	-	800	-
8.2(FINISH)	-	800	-
8.2(FINISH-anodic casting -Min Avg thickness)	-	1600	-
8.2(FINISH-anodic casting -Min Local thickness)	-	1600	-
7.2(Brass/Aluminium alloy door bolt)	-	500	-
7.2(Aluminium alloy door bolt)	-	500	-
7.1(General)	-	500	-
6.1 Fig 1(Dimensions & Tolerances)	-	300	-
6.1 Fig 1(Dimensions & Tolerances)	-	300	-
6.1 Fig 1(Dimensions & Tolerances)	-	300	-
6.1 Fig 1(Dimensions & Tolerances)	-	299.99	-
6.1 Fig 1(Dimensions & Tolerances)	-	300	-
6.1 Fig 1(Dimensions & Tolerances)	-	300	-
6.1 Fig 1(Dimensions & Tolerances)	-	300	-
6.1 Fig 1(Dimensions & Tolerances)	-	300	-
6.1 Fig 1(Dimensions & Tolerances)	-	300	-
6.1 Fig 1(Dimensions & Tolerances)	-	300	-
6.1 Fig 1 & Table 3(Dimensions & Tolerances)	-	300	-
6.1 Fig 1 & Table 3(Dimensions & Tolerances)	-	300	-
6.1 Fig 1 & Table 3(Dimensions & Tolerances)	-	300	-
6.1 Fig 1 & Table 3(Dimensions & Tolerances)	-	300	-
6.1 Fig 1 & Table 3(Dimensions & Tolerances)	-	300	-
6.1 Fig 1 & Table 3(Dimensions & Tolerances)	-	300	-
6.1 Fig 1 & Table 3(Dimensions & Tolerances)	-	300	-
6.1 Fig 1 & Table 3(Dimensions & Tolerances)	-	300	-
6.1 Fig 1 & Table 3(Dimensions & Tolerances)	-	300	-
6.1 Fig 1 & Table 3(Dimensions & Tolerances)	-	300	-
6.1 Fig 1 & Table 3(Dimensions & Tolerances)	-	300	-
6.1 Fig 1 & Table 3(Dimensions & Tolerances)	-	300	-
6.1 Fig 1 & Table 3(Dimensions & Tolerances)	-	300	-
6.1 Fig 1 & Table 3(Dimensions & Tolerances)	-	300	-
6.1 Fig 1 & Table 3(Dimensions & Tolerances)	-	300	-
6.1 Fig 1 & Table 3(Dimensions & Tolerances)	-	300	-
6.1 Fig 1 & Table 3(Dimensions & Tolerances)	-	300	-
4.0(Sizes)	-	300	-
3.1(Sliding Door Bolts)	-	300	-

-
Included w.e.f 22.01.2026

993

National Test House (NER) - NTH, Guwahati

5169204

IS 7098 : Part 1 (1988)

Specification for crosslinked polyethylene insulated pvc sheathed cables: Part 1 for working voltages up to and including 1100 volts (First Revision)

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(CONDUCTOR: MATERIALS)	-	0	-
4(INSULATION : MATERIALS)	-	0	-
5.1(FILLER AND INNER SHEATH)	-	0	-
5.2(FILLER AND INNER SHEATH)	-	0	-
7(OUTER SHEATH)	-	0	-
8.1(CONDUCTOR: CONSTRUCTION)	-	0	-
8.2(PROTECTIVE BARRIER)	-	0	-
8.3(SIZE OF NEUTRAL CONDUCTOR)	-	0	-
9.1(Insulation Applied by extrusicn)	-	0	-
9.2(Thickness of Insulation - Average)	-	250	-
9.3(Thickness of Insulation - Minimum)	-	250	-
9.4(Application of Insulation)	-	0	-
10.1(Core Identification)	-	0	-
10.2(Core Identification- Neutral)	-	0	-
10.3(Core Identification by number )	-	0	-
10.4(Core Identification by number - Neutral )	-	0	-
11(LAVING UP OF CORES)	-	0	-
12.1 & 12.2(Inner sheath : Application)	-	0	-
12.3(Thickness of Inner Sheath)	-	250	-
13.1(Armouring: Application)	-	0	-
13.1.2(Armouring: Coverage )	-	0	-
13.1.3(Armouring: Direction of Lay )	-	0	-
13.2(Type of armour )	-	0	-
13.3(Armouring : Dimensions -Wire Diameter)	-	250	-
13.3(Armouring : Dimensions -Formed wire )	-	0	-
13.4(Armour: Joint)	-	0	-
13.5(Armouring : Resistance Test)	-	2000	-
14.1(Outer Sheath : Application)	-	0	-
14.2(Colour of outer sheath)	-	0	-
14.3(Thickness of outer sheath - AVERAGE)	-	250	-
14.3(Thickness of outer sheath - minimum)	-	250	-
15.1 a) i)(Annealing Test ( For copper wire ) )	-	1000	-
15.1 a) ii)(Tensile test (for aluminium) - Before stranding )	-	1000	-
15.1 a) ii)(Tensile test (for aluminium) - After stranding )	-	1000	-
15.1 a) iii)(Wrapping test (for aluminium))	-	500	-
15.1 a) iv)(Resistance test - Main conductor)	-	1000	-
15.1 a) iv)(Resistance test - Neutral conductor)	-	1000	-
15.1 d) i) (Phyaical tests for insulation : Tensile Test)	-	1500	-
15.1 d) i) (Phyaical tests for insulation : Elongation)	-	0	-
15.1 d) ii) (Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-	2000	-
15.1 d) ii) (Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-	0	-
15.1 d) iii) (Phyaical tests for insulation : Hot set )	-	1000	-
15.1 d) iii) (Phyaical tests for insulation : Permanent set )	-	0	-
15.1 d) iv) (Phyaical tests for insulation : Shrinkage )	-	1000	-
15.1 d) iv) (Phyaical tests for insulation : Shrinkage - Crack observed )	-	0	-
15.1 d) v) (Insulation: Waterabsorption(gravimetric))	-	2000	-
15.1 e) i) (Physical tests for outer sheath : Tensile stregth)	-	1000	-
15.1 e) i) (Physical tests for outer sheath : Elongation)	-	0	-
15.1 e) ii) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-	0	-
15.1 e) ii) (Physical tests for outer sheath -Ageing in air oven : Elongation )	-	1000	-
15.1 e) ii) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation )	-	0	-
15.1 e) ii) (Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-	0	-
15.1 e) iii) (Sheath: Loss of mass in air oven)	-	1000	-
15.1 e) iv) (Phyaical tests for Sheath : Shrinkage )	-	500	-
15.1 e) iv) (Phyaical tests for Sheath : Shrinkage - Crack observed )	-	0	-
15.1 e) v) (Sheath : Hot deformation)	-	500	-
15.1 e) vi) (Sheath : Heat shock test)	-	500	-
15.1 e) vii) (Sheath : Thermalstability)	-	1000	-
15.1 f)(INSULATION RESISTANCE TEST : Volume resistivity )	-	2000	-
16.2(HIGH VOLTAGE TEST )	-	2000	-
16.3(FLAMMABILITY TEST : Period of Burning )	-	500	-
16.3(FLAMMABILITY TEST : Unaffected length )	-	0	-
16.9(Oxygen Index Test)	-	5000	-
16.13(Test for Halogen Acid Gas Evolution)	-	5000	-
16.14(Temperature Index)	-	50000	-
17.1(Manufacturer'. identification)	-	0	-
17.2(cable Indentification )	-	0	-
17.3(cable Code )	-	0	-
15.4 (a)(Cold bend)	-	1000	-
15.4 (b)(Cold impact)	-	1000	-
Table 1(Ageing in air oven - Elongation on Insulation)	-	0	-
Table 1(Ageing in air oven - Tensile strength on Insulation)	-	0	-
Table 1(Ageing in air oven - Elongation on Insulation)	-	0	-
Table 1(Ageing in air oven - Tensile strength on Insulation)	-	0	-
Table 4(Copper purity test)	-	1000	-
Table 2(Cold Impact test for Outer sheath)	-	0	-
Cl 16(Halogen Acid Gas Test)	-	5000	-
Cl.8(Conductor)	-	0	-
Cl.15.4(Cold Bend Test (for outer sheath))	-	1000	-
Cl.15.4(Cold Impact Test (For outer sheath))	-	1000	-
Cl.13.5.1 and Table 7(Resistance Test for Armouring (other than mining Cables))	-	0	-
13.6 a)(ARMOURING: Tensile Strength)	-	1500	-
13.6 b)(ARMOURING: Elongation )	-	0	-
13.6 c)(ARMOURING: Torsion Test (For round wire ) )	-	0	-
13.6 d)(ARMOURING: Winding Test(For formed wire))	-	0	-
13.6 e)(ARMOURING: Uniformity of zinc coating)	-	2000	-
13.6 g)(ARMOURING: Resistivity)	-	1500	-
13.6 f)(ARMOURING: Mass of zinc coating )	-	2000	-
Cl No. 16.15(Smoke density test)	-	5000	-
Table 2(Cold bend test for Outer sheath)	-	1000	-
3(CONDUCTOR: MATERIALS)	-	0	-
4(INSULATION : MATERIALS)	-	0	-
5.1(FILLER AND INNER SHEATH)	-	0	-
5.2(FILLER AND INNER SHEATH)	-	0	-
7(OUTER SHEATH)	-	0	-
8.1(CONDUCTOR: CONSTRUCTION)	-	0	-
8.2(PROTECTIVE BARRIER)	-	0	-
8.3(SIZE OF NEUTRAL CONDUCTOR)	-	0	-
9.1(Insulation Applied by extrusicn)	-	0	-
9.2(Thickness of Insulation - Average)	-	250	-
9.3(Thickness of Insulation - Minimum)	-	250	-
9.4(Application of Insulation)	-	0	-
10.1(Core Identification)	-	0	-
10.2(Core Identification- Neutral)	-	0	-
10.3(Core Identification by number )	-	0	-
10.4(Core Identification by number - Neutral )	-	0	-
11(LAVING UP OF CORES)	-	0	-
12.1 & 12.2(Inner sheath : Application)	-	0	-
12.3(Thickness of Inner Sheath)	-	250	-
13.1(Armouring: Application)	-	0	-
13.1.2(Armouring: Coverage )	-	0	-
13.1.3(Armouring: Direction of Lay )	-	0	-
13.2(Type of armour )	-	0	-
13.3(Armouring : Dimensions -Wire Diameter)	-	0	-
13.3(Armouring : Dimensions -Formed wire )	-	0	-
13.4(Armour: Joint)	-	0	-
13.5(Armouring : Resistance Test)	-	1500	-
14.1(Outer Sheath : Application)	-	0	-
14.2(Colour of outer sheath)	-	0	-
14.3(Thickness of outer sheath - AVERAGE)	-	250	-
14.3(Thickness of outer sheath - minimum)	-	250	-
15.1 a) i)(Annealing Test ( For copper wire ) )	-	1000	-
15.1 a) ii)(Tensile test (for aluminium) - Before stranding )	-	1000	-
15.1 a) ii)(Tensile test (for aluminium) - After stranding )	-	1000	-
15.1 a) iii)(Wrapping test (for aluminium))	-	500	-
15.1 a) iv)(Resistance test - Main conductor)	-	1500	-
15.1 a) iv)(Resistance test - Neutral conductor)	-	1500	-
15.1 d) i) (Phyaical tests for insulation : Tensile Test)	-	1500	-
15.1 d) i) (Phyaical tests for insulation : Elongation)	-	0	-
15.1 d) ii) (Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-	0	-
15.1 d) ii) (Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-	0	-
15.1 d) iii) (Phyaical tests for insulation : Hot set )	-	1000	-
15.1 d) iii) (Phyaical tests for insulation : Permanent set )	-	1000	-
15.1 d) iv) (Phyaical tests for insulation : Shrinkage )	-	1000	-
15.1 d) iv) (Phyaical tests for insulation : Shrinkage - Crack observed )	-	0	-
15.1 d) v) (Insulation: Waterabsorption(gravimetric))	-	2000	-
15.1 e) i) (Physical tests for outer sheath : Tensile stregth)	-	1500	-
15.1 e) i) (Physical tests for outer sheath : Elongation)	-	0	-
15.1 e) ii) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-	2000	-
15.1 e) ii) (Physical tests for outer sheath -Ageing in air oven : Elongation )	-	0	-
15.1 e) ii) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation )	-	0	-
15.1 e) ii) (Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-	0	-
15.1 e) iii) (Sheath: Loss of mass in air oven)	-	2000	-
15.1 e) iv) (Phyaical tests for Sheath : Shrinkage )	-	1000	-
15.1 e) iv) (Phyaical tests for Sheath : Shrinkage - Crack observed )	-	0	-
15.1 e) v) (Sheath : Hot deformation)	-	500	-
15.1 e) vi) (Sheath : Heat shock test)	-	500	-
15.1 e) vii) (Sheath : Thermalstability)	-	1000	-
15.1 f)(INSULATION RESISTANCE TEST : Volume resistivity )	-	2000	-
16.2(HIGH VOLTAGE TEST )	-	2000	-
16.3(FLAMMABILITY TEST : Period of Burning )	-	250	-
16.3(FLAMMABILITY TEST : Unaffected length )	-	250	-
16.9(Oxygen Index Test)	-	5000	-
16.13(Test for Halogen Acid Gas Evolution)	-	5000	-
16.14(Temperature Index)	-	5000	-
17.1(Manufacturer'. identification)	-	0	-
17.2(cable Indentification )	-	0	-
17.3(cable Code )	-	0	-
15.4 (a)(Cold bend)	-	1000	-
15.4 (b)(Cold impact)	-	1500	-
Table 1(Ageing in air oven - Elongation on Insulation)	-	2000	-
Table 1(Ageing in air oven - Tensile strength on Insulation)	-	2000	-
Table 1(Ageing in air oven - Elongation on Insulation)	-	2000	-
Table 1(Ageing in air oven - Tensile strength on Insulation)	-	2000	-
Table 4(Copper purity test)	-	1000	-
Table 2(Cold Impact test for Outer sheath)	-	1500	-
Cl 16(Halogen Acid Gas Test)	-	5000	-
Cl.8(Conductor)	-	0	-
Cl.15.4(Cold Bend Test (for outer sheath))	-	1000	-
Cl.15.4(Cold Impact Test (For outer sheath))	-	1500	-
Cl.13.5.1 and Table 7(Resistance Test for Armouring (other than mining Cables))	-	1500	-
13.6 a)(ARMOURING: Tensile Strength)	-	1000	-
13.6 b)(ARMOURING: Elongation )	-	0	-
13.6 c)(ARMOURING: Torsion Test (For round wire ) )	-	1000	-
13.6 d)(ARMOURING: Winding Test(For formed wire))	-	0	-
13.6 e)(ARMOURING: Uniformity of zinc coating)	-	1000	-
13.6 g)(ARMOURING: Resistivity)	-	1500	-
13.6 f)(ARMOURING: Mass of zinc coating )	-	1000	-
Cl No. 16.15(Smoke density test)	-	5000	-
Table 2(Cold bend test for Outer sheath)	-	1000	-

13 Dec, 2027

-
Included w.e.f 12.02.2026 Exclusion: Cl 16.1 (Flame Retardance Test on Single Cables), 16.11 (Flame Retardance Test on Bunched Cables)

994

MORBI TEST HOUSE LLP

7195306

IS 2202 : Part 2 (2022)

WOODEN FLUSH DOOR SHUTTERS SOLID CORE TYPE SPECIFICATION PART 2 PARTICLE BOARD HIGH DENSITY FIBRE BOARD MEDIUM DENSITY FIBRE BOARD AND HARDBOARD FACE PANELS Fourth Revision

All Grade / Type / Size / Designation

22500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause No - 6.1(Timber)	-	100	-
Clause No -6.2(Alternative Materials (LVL)	-	0	-
Clause No -6.2(Alternative Materials veneer laminated lumber (VLL))	-	0	-
Clause No -6.2(Alternative Materials medium density fibre board (MDF))	-	0	-
Clause No -6.2(Alternative Materials -plywood)	-	4000	-
Clause No -6.2(BWP grade flush door shutter)	-	1000	-
Clause No -6.3.1("Face Panels: Particle Board MDF/ HDF Fibre Hardboard")	-	0	-
Clause No -6.4(Adhesive)	-	4000	-
Clause No -7.1(Construction)	-	1000	-
Clause No - 7.3(" MDF board or HDF board ")	-	0	-
Clause No -9.2("Workmanship and finish")	-	200	-
Clause No -10.1(tests for flush door shutters)	-	19000	-
Clause No -10.2(End Immersion Test)	-	1000	-
Clause No -10.3(Glue Adhesion Test)	-	1000	-
Clause No -11(SAMPLING AND CRITERIA FOR CONFORMITY)	-	0	-
5(SIZES AND TOLERANCES)	-	1300	-
6.5(The swelling in thickness of the particle board, MDF and HDF board for core)	-	200	-
Cl-6.3.3 (Amendment NO 1)(B D P V, P D P V and M D P V types of flush door)	-	0	-
Cl-6.3.2(MDF board and HDF board)	-	0	-
Cl-6.3.4(B N P V, P N P V and M N P V,)	-	0	-
Cl-7.2(Face Panel)	-	0	-
Cl-7.4 (Amendment No 1)(Door Blanks)	-	0	-
Cl-8(Fittings)	-	100	-

02 Jan, 2029

-
Included w.e.f. 22.01.2026 Exclusion: Clause No -12 ("ADDITIONAL REQUIREMENTS FOR ECO MARK")

995

MORBI TEST HOUSE LLP

7195306

IS 2191 : Part 2 (2022)

WOODEN FLUSH DOOR SHUTTERS (CELLULAR, HOLLOW AND TUBULAR CORE TYPE) - SPECIFICATION PART 2 PARTICLE BOARD, HIGH DENSITY FIBRE BOARD, MEDIUM DENSITY FIBRE BOARD AND FIBRE HARDBOARD FACE PANELS (Fourth Revision)

All Grade / Type / Size / Designation

22500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5(Sizes and Tolerances)	-	1300	-
Cl-6.1.(Timber)	-	100	-
Cl-6.2(Laminated veneer lumber (LVL), veneer laminated lumber (VLL), medium density fibre board (MDF), high density fibre board (HDF))	-	0	-
Cl-6.3.1(Particle board)	-	0	-
Cl-6.3.2(MDF board and HDF board)	-	0	-
Cl-6.3.5(shutters with fibre hardboard face)	-	0	-
Cl-8.1(Locks)	-	100	-
Cl-10.1(various test)	-	19000	-
Cl-10.2(End Immersion Test)	-	1000	-
Cl-10.3(Glue Adhesion Test)	-	1000	-
Cl-13(Marking)	-	100	-

02 Jan, 2029

-
Included w.e.f. 22.01.2026

996

Arihant Analytical Laboratory Pvt. Ltd., Sonipat

9167906

IS 8042 (2015)

White portland cement - Specification (Third Revision)

All Type

8200.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5 - Table - 1 i(Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-	8200.00	-
5 - Table - 1 ii(Iron oxide - Cl 4.5 of IS 4032:1985)	-	8200.00	-
5 - Table - 1 iii(Insoluble residue - Cl 4.10 of IS 4032:1985)	-	8200.00	-
5 - Table - 1 iv(Magnesia - Cl 4.8 of IS 4032:1985)	-	8200.00	-
5 - Table - 1 v(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-	8200.00	-
5 - Table - 1 vi(Loss on ignition - Cl 4.2 of IS 4032:1985)	-	8200.00	-
5 - Table - 1 vii(Chloride content - Cl 4.13 of IS 4032:1985)	-	8200.00	-
6 -Table 2- i(Fineness 4031 Part 2)	-	8200.00	-
6 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	8200.00	-
6 -Table 2- ii- a(Expansion after aeration - 4031 Part 3)	-	8200.00	-
6 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	8200.00	-
6-Table 2- ii- b(Expansion after aeration- 4031 Part 3)	-	8200.00	-
6 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	8200.00	-
6 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	8200.00	-
6 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	8200.00	-
6 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	8200.00	-
6 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	8200.00	-
6 -Table 2- v(Transverse Strength - IS 4031 Part 8 (Optional))	-	8200.00	-
6 -Table 2- vi(Degree of whiteness-Annex B)	-	8200.00	-
5 - Table - 1 i(Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-	8200.00	-
5 - Table - 1 ii(Iron oxide - Cl 4.5 of IS 4032:1985)	-	8200.00	-
5 - Table - 1 iii(Insoluble residue - Cl 4.10 of IS 4032:1985)	-	8200.00	-
5 - Table - 1 iv(Magnesia - Cl 4.8 of IS 4032:1985)	-	8200.00	-
5 - Table - 1 v(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-	8200.00	-
5 - Table - 1 vi(Loss on ignition - Cl 4.2 of IS 4032:1985)	-	8200.00	-
5 - Table - 1 vii(Chloride content - Cl 4.13 of IS 4032:1985)	-	8200.00	-
6 -Table 2- i(Fineness 4031 Part 2)	-	8200.00	-
6 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	8200.00	-
6 -Table 2- ii- a(Expansion after aeration - 4031 Part 3)	-	8200.00	-
6 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	8200.00	-
6-Table 2- ii- b(Expansion after aeration- 4031 Part 3)	-	8200.00	-
6 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	8200.00	-
6 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	8200.00	-
6 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	8200.00	-
6 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	8200.00	-
6 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	8200.00	-
6 -Table 2- v(Transverse Strength - IS 4031 Part 8 (Optional))	-	8200.00	-
6 -Table 2- vi(Degree of whiteness-Annex B)	-	8200.00	-
6, table-2, ii(Whiteness)	-	8200.00	-
Clause 6 Table 2, SI No. (v) (Compressive strength of Transverse Specimen, 672 ± 4 h)	-	8200.00	-
Clause 6 Table 2, SI No. (v) (Compressive strength of Transverse Specimen, 168 ± 2 h)	-	8200.00	-
Clause 6 Table 2, SI No. (v) (Compressive strength of Transverse Specimen, 72 ± 1 h)	-	8200.00	-
Clause 6 Table 2, SI No. (v) (Transverse Strength, 672 ± 4 h)	-	8200.00	-
Clause 6 Table 2, SI No. (v) (Transverse Strength, 168 ± 2 h)	-	8200.00	-
Clause 6 Table 2, SI No. (v) (Transverse Strength, 72 ± 1 h)	-	8200.00	-

02 Jun, 2027

-
Included w.e.f. 02.03.2026

997

MORBI TEST HOUSE LLP

7195306

IS 2191 : Part 1 (2022)

WOODEN FLUSH DOOR SHUTTERS CELLULAR TUBULAR AND HOLLOW CORE TYPE SPECIFICATION PART 1 PLYWOOD FACE PANELS Fifth Revision

All Grade / Type / Size / Designation

22500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5(Sizes)	-	100	-
Cl-6.1.1(Species of timber)	-	100	-
Cl-6.3(Cross-Bands)	-	100	-
Cl-6.4.1(Commercial face veneers)	-	100	-
Cl-6.4.2(Decorative face veneers)	-	100	-
Cl-6.7(Particle Board)	-	1000	-
Cl-6.8(Laminated veneer lumber (LVL), veneer laminated lumber (VLL), Medium Density Fibre (MDF))	-	100	-
Cl-11.1(Dimensions and Squareness Test)	-	1500	-
Cl-11.2(General Flatness Test)	-	1000	-
Cl-11.3(Local Planeness Test)	-	1000	-
Cl-11.4(Impact Indentation Test)	-	1500	-
Cl-11.5(Flexure Test)	-	1000	-
Cl-11.6(Edge Loading Test)	-	2000	-
Cl-11.7(Shock Resistance Test)	-	1500	-
Cl-11.8(Buckling Resistance Test)	-	2000	-
Cl-11.9(Slamming Test)	-	1000	-
Cl-11.10(Misuse Test)	-	1000	-
Cl-11.11(Varying Humidity Test)	-	2500	-
Cl-11.12(End Immersion Test)	-	1500	-
Cl-11.13(Knife Test)	-	500	-
Cl-11.14(Glue Adhesion Test)	-	1000	-
Cl-11.15(Screw Withdrawal Resistance Test)	-	2000	-
Cl-12.2(Sample Size)	-	100	-
Cl-14(Marking)	-	100	-
Cl-6.1.2(Moisture content of timber)	-	100	-
Cl-9(Workmanship and Finish)	-	100	-
Cl-6.1.3(Defects)	-	200	-
Cl-6.2(Plywood)	-	4000	-
Cl-6.5(Cross-bands and face veneers)	-	100	-
Cl-6.6(Adhesives)	-	4000	-
Cl-7(Construction)	-	100	-
Cl-8(Fittings)	-	100	-

02 Jan, 2029

-
Included w.e.f. 22.01.2026

998

Samridhi Test House Pvt. Ltd.

8184706

IS 915 (2012)

Laboratory glassware - One - Mark volumetric flasks (Third Revision)

All Grade / Type / Size / Designation

9800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1(Material)	-	0	-
Table 1(Nominal Capacity)	-	800	-
Table 1(Internal Neck Diameter)	-	300	-
Table 1(Distance of graduation line)	-	100	-
Table 1(Overall Height)	-	300	-
Table 1(Bulb Diameter)	-	300	-
Table 1(Base Diameter)	-	300	-
Table 1(Wall Thickness)	-	300	-
Table 1(Ground joint k4)	-	100	-
Table 1(Ground joint k6)	-	100	-
8.3(Shape)	-	100	-
8.4(Neck)	-	300	-
8.5(Stopper)	-	300	-
8.6(Dimensions)	-	1000	-
9.0(Graduation Line)	-	300	-
Table-2(Nominal capacity)	-	1000	-
Table-2(Internal neck diameter)	-	300	-
Table-2(Distance of graduation line 1))	-	300	-
Table-2(Overall height 2))	-	300	-
Table-2(Bulb diameter)	-	300	-
Table-2(Base diameter)	-	300	-
Table-2(Wall thickness)	-	300	-
Table-2(Ground joint 3) k4)	-	100	-
Table-2(Ground joint 3) k6)	-	100	-
12.1(Visibility of graduation line, figures and marking)	-	400	-
12.2(Visibility of graduation line, figures and marking)	-	400	-
Clause. 7.0(Accuracy)	-	1000	-
Table 1(Nominal Capacity)	-	0	-
9.0(Graduation Line)	-	0	-
Table-2(Nominal capacity)	-	0	-
Table-2(Internal neck diameter)	-	0	-
Table-2(Distance of graduation line 1))	-	0	-
Table-2(Overall height 2))	-	0	-
Table-2(Bulb diameter)	-	0	-
Table-2(Base diameter)	-	0	-
Table-2(Wall thickness)	-	0	-
Table-2(Ground joint 3) k4)	-	0	-
Table-2(Ground joint 3) k6)	-	0	-
12.1(Visibility of graduation line, figures and marking)	-	0	-
12.2(Visibility of graduation line, figures and marking)	-	0	-
Clause. 7.0(Accuracy)	-	0	-
Table 1(Nominal Capacity)	-	0	-
9.0(Graduation Line)	-	0	-
Table-2(Nominal capacity)	-	0	-
Table-2(Internal neck diameter)	-	0	-
Table-2(Distance of graduation line 1))	-	0	-
Table-2(Overall height 2))	-	0	-
Table-2(Bulb diameter)	-	0	-
Table-2(Base diameter)	-	0	-
Table-2(Wall thickness)	-	0	-
Table-2(Ground joint 3) k4)	-	0	-
Table-2(Ground joint 3) k6)	-	0	-
12.1(Visibility of graduation line, figures and marking)	-	0	-
12.2(Visibility of graduation line, figures and marking)	-	0	-
Clause. 7.0(Accuracy)	-	0	-
Table 1(Nominal Capacity)	-	0	-
9.0(Graduation Line)	-	0	-
Table-2(Nominal capacity)	-	0	-
Table-2(Internal neck diameter)	-	0	-
Table-2(Distance of graduation line 1))	-	0	-
Table-2(Overall height 2))	-	0	-
Table-2(Bulb diameter)	-	0	-
Table-2(Base diameter)	-	0	-
Table-2(Wall thickness)	-	0	-
Table-2(Ground joint 3) k4)	-	0	-
Table-2(Ground joint 3) k6)	-	0	-
12.1(Visibility of graduation line, figures and marking)	-	0	-
12.2(Visibility of graduation line, figures and marking)	-	0	-
Clause. 7.0(Accuracy)	-	0	-

-
Included w.e.f. 25.03.2026 Exclusion: 8.1 (Material)

999

IDMA LABORATORIES LIMITED, PANCHKULA

9123236

IS 14709 (2025)

n-Butyl Acrylate - Specification (First Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-3.1, Table-1 (i)(Assay, percent by mass, Min)	-	2500	-
Cl-3.1, Table-1 (ii)(Acidity (as acrylic acid), percent by mass, Max)	-	1000	-
Cl-3.1, Table-1 (iii)(Colour, Pt-Co scale, Max)	-	2000	-
Cl-3.1, Table-1 (iv)(Water content, percent by mass, Max)	-	2000	-
Cl-3.1, Table-1 (v)(Inhibitors (as monomethyl etherhydroquinone), ppm, Max)	-	2500	-
Cl-3.1, Table-1 (i)(Assay, percent by mass, Min)	-	0	-
Cl-4.2(Marking)	-	0	-

31 Dec, 2026

-
Included w.e.f. 24.02.2026

1000

IDMA LABORATORIES LIMITED, PANCHKULA

9123236

IS 14708 (2025)

Ethyl Acrylate - Specification (First Revision)

11000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1 Table 1 (i)(Assay (IS 14708 : 2025))	-	2500	-
3.1 Table 1 (ii)(Acidity (as Acrylic Acid) (IS 14708 : 2025))	-	1500	-
3.1 Table 1 (iii)(Colour, Pt - Co scale (IS 8768 / IS 1448 (Part 178))	-	2000	-
3.1 Table 1 (iv)(Water (IS 2362 / IS 1448 (Part 182))	-	2000	-
3.1 Table 1 (v)(Inhibitors (as monomethyl Ether Hydroquinone) (IS 14708 : 2025))	-	3000	-

31 Dec, 2026

-
included w.e.f 17.03.2026

1001

JBS TESTING SOLUTIONS (Unit-2) (24), Jalandhar

9172306

IS 996 (2025)

SINGLE PHASE ac INDUCTION MOTORS FOR GENERAL PURPOSE (Fouth Revision)

17250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-7(Dimensions)	-	450	-
Cl-9.1(Mounting)	-	100	-
Cl-9.2(Terminal Box)	-	100	-
Cl-9.3(Mounting Constructions)	-	100	-
Cl-9.3(Mounting Constructions)	-	100	-
Cl-9.4(Constructional Features)	-	100	-
Cl-9.5(Earthing)	-	200	-
Cl-10.1(Enclosures)	-	200	-
Cl-12.1(Torques)	-	750	-
Cl-12.1.2(Momentary overload test)	-	799.99	-
Cl-12.2(Temperature Rise)	-	1750	-
Cl-12.3(Short Time Rating)	-	500	-
Cl-12.4(Method of Testing)	-	100	-
Cl-12.5(Performance Values)	-	500	-
Cl-12.6(Limits of Vibration Severity)	-	450	-
Cl-12.7(Insulation Resistance)	-	1000	-
Cl-13.1(High Voltage Values)	-	1000	-
Cl-13.2(Moisture Proofness)	-	1000	-
Cl-13.3(Leakage Current)	-	1000	-
Cl-14(Winding Resistance Measurement)	-	1049.99	-
Cl-15(REDUCED VOLTAGE RUNNING UP TEST AT NO LOAD)	-	800	-
Cl-16(NOISE LEVEL)	-	500	-
Cl-17(OVER SPEED TEST)	-	500	-
Cl-18(TERMINAL MARKING)	-	500	-
Cl-12.1.1(Test for torues at rated voltage and frequency)	-	500	-
Cl-12.1.1(Pull up Torque at rated voltage and frequency)	-	500	-
Cl-12.1.1(Test for breakaway starting current at rated voltage and frequency)	-	500	-
Cl-12.1.2(Breakaway (starting) torque at rated voltage and frequency)	-	500	-
Cl-12.5.1(Test for full-load performance at rated voltage and frequency)	-	1000	-
Cl-21.5(Acceptance Tests)	-	1000	-

22 May, 2029

-
included w.e.f 16.03.2026

1002

AANKAN CALIBRATION AND TESTING CENTRE LLP, DANTLI

7184406

IS 7834 : Part 3 (1987)

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 3 Specific requirements for 90 degree elbows

8000 View breakup
-

Clause No.	Exclusion	Remark
cl 2.2.2(Dimensions)	-	Complete Testing Charges Rs 8000/--
Cl. 2.1 (Ref. Cl. 6.3 of IS 7834 (part 1) : 1987(Effect on water - Lead (first extraction) - Appendix C )	-	Complete Testing Charges Rs 8000/-
Cl. 2.1 (Ref. Cl. 6.3 of IS 7834 (part 1) : 1987(Effect on water - Lead (third extraction) - Appendix C)	-	Complete Testing Charges Rs 8000/-
Cl. 2.1 (Ref. Cl. 6.3 of IS 7834 (part 1) : 1987(Effect on water - Dialkyl tin C4 and higher homologues measured as tin (third extraction) - Appendix C)	-	Complete Testing Charges Rs 8000/-
Cl. 2.1 (Ref. Cl. 6.3 of IS 7834 (part 1) : 1987(Effect on water - Other toxic substances (third extraction) - Appendix C)	-	Complete Testing Charges Rs 8000/-
6.1.1(VCM Content Test)	-	Complete Testing Charges Rs 8000/-
2.2.2 table 1(Laying length)	-	Complete Testing Charges Rs 8000/-
cl 2.2.2(Dimensions)	-	Complete Testing Charges Rs 8000/--
Cl. 2.1 (Ref. Cl. 6.3 of IS 7834 (part 1) : 1987(Effect on water - Lead (first extraction) - Appendix C )	-	Complete Testing Charges Rs 8000/-
Cl. 2.1 (Ref. Cl. 6.3 of IS 7834 (part 1) : 1987(Effect on water - Lead (third extraction) - Appendix C)	-	Complete Testing Charges Rs 8000/-
Cl. 2.1 (Ref. Cl. 6.3 of IS 7834 (part 1) : 1987(Effect on water - Dialkyl tin C4 and higher homologues measured as tin (third extraction) - Appendix C)	-	Complete Testing Charges Rs 8000/-
Cl. 2.1 (Ref. Cl. 6.3 of IS 7834 (part 1) : 1987(Effect on water - Other toxic substances (third extraction) - Appendix C)	-	Complete Testing Charges Rs 8000/-
6.1.1(VCM Content Test)	-	Complete Testing Charges Rs 8000/-
2.2.2 table 1(Laying length)	-	Complete Testing Charges Rs 8000/-
cl 2.2.2(Dimensions)	-	-
Cl. 2.1 (Ref. Cl. 6.3 of IS 7834 (part 1) : 1987(Effect on water - Lead (first extraction) - Appendix C )	-	-
Cl. 2.1 (Ref. Cl. 6.3 of IS 7834 (part 1) : 1987(Effect on water - Lead (third extraction) - Appendix C)	-	-
Cl. 2.1 (Ref. Cl. 6.3 of IS 7834 (part 1) : 1987(Effect on water - Dialkyl tin C4 and higher homologues measured as tin (third extraction) - Appendix C)	-	-
Cl. 2.1 (Ref. Cl. 6.3 of IS 7834 (part 1) : 1987(Effect on water - Other toxic substances (third extraction) - Appendix C)	-	-
6.1.1(VCM Content Test)	-	-
2.2.2 table 1(Laying length)	-	-

17 Mar, 2028

-
Included w.e.f 17.02.2026

1003

Unique Test House LLP

9134536

IS 5504 (2025)

Spiral Welded Pipes - Specification (Second Revision)

ALL SIZES

11000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1(SCOPE)	-	200	........
2(REFERENCES)	-	100	............
3(Freedom From Defects)	-	100	............
4(Manufacture)	-	100	............
4.1(Manufacture)	-	100	.............
4.2(Manufacture)	-	100	...............
5(Type and Grades)	-	500	............
6(Chemical Composition)	-	2000	.............
7(Physical Tests)	-	500	.........
7.1(Tensile test)	-	2000	........
7.2(Flattening Tests)	-	500	......
7.3(Submerged- Are Weld Tests)	-	500	......
8(Hydraulic Pressure Test)	-	1000	........
9(Permissible variations in dimensions)	-	1000	........
9.1(Lengths)	-	500	.....
9.2(Thickness and Diameter)	-	1000	.........
10(Finish)	-	100	........
11(Repair by Welding)	-	500	........
12(Protective Coating)	-	500	........
13(Marking)	-	100	.......
13.2(Bis Certification Marking)	-	100	......
14(Information to be supplied by the purchaser)	-	100	...........
1(SCOPE)	-	100	..................
2(REFERENCES)	-	100	.........
3(Freedom From Defects)	-	100	...........
4(Manufacture)	-	100	........
4.1(Manufacture)	-	100	.............
4.2(Manufacture)	-	100	...............
5(Type and Grades)	-	200	........
6(Chemical Composition)	-	500	......
7(Physical Tests)	-	500	.......
7.1(Tensile test)	-	500	....
7.2(Flattening Tests)	-	500	......
7.3(Submerged- Are Weld Tests)	-	500	......
8(Hydraulic Pressure Test)	-	500	....
9(Permissible variations in dimensions)	-	500	......
9.1(Lengths)	-	500	..............
9.2(Thickness and Diameter)	-	500	.........
10(Finish)	-	500	........
11(Repair by Welding)	-	500	......
12(Protective Coating)	-	200	.............
13(Marking)	-	100	..............
13.2(Bis Certification Marking)	-	100	..........
14(Information to be supplied by the purchaser)	-	100	.......
Cl. 6.1, S.No. i)(Carbon)	-	500	......
Cl. 6.1, S.No. ii)(Sulphur)	-	500	....
Cl. 6.1, S.No. iii)(Phosphorus)	-	500	.............
1(SCOPE)	-	100	..............
2(REFERENCES)	-	100	..........
3(Freedom From Defects)	-	100	.....................
4(Manufacture)	-	100	..................
4.1(Manufacture)	-	100	..................
4.2(Manufacture)	-	100	..................
5(Type and Grades)	-	500	................
6(Chemical Composition)	-	500	.................
7(Physical Tests)	-	1000	.................
7.1(Tensile test)	-	1000	..................
7.2(Flattening Tests)	-	1000	.................
7.3(Submerged- Are Weld Tests)	-	1000	...................
8(Hydraulic Pressure Test)	-	500	..................
9(Permissible variations in dimensions)	-	500	..................................
9.1(Lengths)	-	500	....................
9.2(Thickness and Diameter)	-	500	...................
10(Finish)	-	100	...................
11(Repair by Welding)	-	200	..................
12(Protective Coating)	-	200	..................
13(Marking)	-	100	..................
13.2(Bis Certification Marking)	-	100	....................
14(Information to be supplied by the purchaser)	-	500	..................
Cl. 6.1, S.No. i)(Carbon)	-	200	....................
Cl. 6.1, S.No. ii)(Sulphur)	-	200	...................
Cl. 6.1, S.No. iii)(Phosphorus)	-	20	..........................

07 Sep, 2028

-
included w.e.f 01.04.2026

1004

Unique Test House LLP

9134536

IS 7378 (1974)

Bed, Fowler's, Hospital

ALL SIZES

11000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.1(Flais, Angles and Strips)	-	1000	..............
2.2(Castings)	-	1000	............
2.3(Tubings)	-	1000	..............
2.4(Shoes)	-	500	......................
2.5(Castors)	-	500	..............
3(Shape and Dimensions)	-	2000	..........
4(Manufacture)	-	200	........
5(Workmanship)	-	200	...........
6(Finish)	-	200	....
7.1(Impact test)	-	1000	..............
7.2(Mattress test)	-	1000	...........
7.3(Adhesion Test)	-	1000	..................
7.3(Performance Test)	-	1000	...............
8(Marking)	-	200	..............
9(Packing)	-	200	.................
2.1(Flais, Angles and Strips)	-	500	................
2.2(Castings)	-	500	......................
2.3(Tubings)	-	500	.........................
2.4(Shoes)	-	100	......................
2.5(Castors)	-	500	.......................
3(Shape and Dimensions)	-	500	........................
4(Manufacture)	-	100	......................
5(Workmanship)	-	100	......................
6(Finish)	-	100	...................
7.1(Impact test)	-	500	....................
7.2(Mattress test)	-	500	.....................
7.3(Adhesion Test)	-	100	...................
7.3(Performance Test)	-	100	....................
8(Marking)	-	100	...................
9(Packing)	-	100	.................
2.1(Flais, Angles and Strips)	-	1000	........................
2.2(Castings)	-	500	.........................
2.3(Tubings)	-	500	....................
2.4(Shoes)	-	500	...................
2.5(Castors)	-	400	..................
3(Shape and Dimensions)	-	500	.................
4(Manufacture)	-	100	................
5(Workmanship)	-	100	.................
6(Finish)	-	100	................
7.1(Impact test)	-	500	................
7.2(Mattress test)	-	500	................
7.3(Adhesion Test)	-	500	................
7.3(Performance Test)	-	100	.................
8(Marking)	-	100	................
9(Packing)	-	100	.................

07 Sep, 2028

-
included w.e.f 01.04.2026

1005

S.B.Steels Company, Bally

5120906

IS 10748 (2025)

Hot-Rolled Steel Strip for Welded Tubes and Pipes - Specification ( Third Revision)

16000.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-8.3, Table-5 & 6(Tensile Strength, MPa)	-	500.00	-
Cl-8.3, Table-5 & 6(Yield Strength, MPa)	-	500.00	-
Cl-9.2(Bend test)	-	500.00	-
Cl-11(freedam from Defects)	-	500.00	-
Cl-12(Dimensions)	-	3000.00	-
Cl-14(Calculation of Mass)	-	500.00	-
Cl-7.1, 7.2, 7.3 & 7.4(Carbon)	-	500.0	-
Cl-7.1, 7.2, 7.3 & 7.4(Manganese)	-	500.00	-
Cl-7.1, 7.2, 7.3 & 7.4(Sulphur)	-	500.00	-
Cl-7.1, 7.2, 7.3 & 7.4(Phosphorus)	-	500.00	-
Cl-7.1, 7.2, 7.3 & 7.4(Carbon Equivalent Value (CEV))	-	1000.00	-
Cl-7.1, 7.2, 7.3 & 7.4(silicon)	-	500.00	-
Cl-7.1, 7.2, 7.3 & 7.4(aluminium)	-	500.00	-
Cl-7.1, 7.2, 7.3 & 7.4(Niobium)	-	500.00	-
Cl-7.1, 7.2, 7.3 & 7.4(Vanadium)	-	500.00	-
Cl-7.1, 7.2, 7.3 & 7.4(Titanium)	-	500.00	-
Cl-7.1, 7.2, 7.3 & 7.4(Nitrogen)	-	1500.00	-
Cl-7.1, 7.2, 7.3 & 7.4(Copper)	-	500.00	-
Cl-7.1, 7.2, 7.3 & 7.4(Mo + Cr +W)	-	1500.00	-
Cl-7.1, 7.2, 7.3 & 7.4(Mo)	-	500.00	-
Cl-7.1, 7.2, 7.3 & 7.4(Boron)	-	500.00	-
Cl-7.1, 7.2, 7.3 & 7.4(Nickel)	-	500.00	-
Cl-7.1, 7.2, 7.3 & 7.4(Chromium)	-	500.00	-
Cl-8.3, Table-5 & 6(Elongation at Gauge Length,)	-	500.00	-
Cl-8.3, Table-5 & 6(Tensile Strength, MPa)	-	500.00	-
Cl-8.3, Table-5 & 6(Yield Strength, MPa)	-	500.00	-
Cl-9.2(Bend test)	-	500.00	-
Cl-11(freedam from Defects)	-	500.00	-
Cl-12(Dimensions)	-	3000.00	-
Cl-14(Calculation of Mass)	-	500.00	-
Cl-7.1, 7.2, 7.3 & 7.4(Carbon)	-	500.00	-
Cl-7.1, 7.2, 7.3 & 7.4(Manganese)	-	500.00	-
Cl-7.1, 7.2, 7.3 & 7.4(Sulphur)	-	500.00	-
Cl-7.1, 7.2, 7.3 & 7.4(Phosphorus)	-	500.00	-
Cl-7.1, 7.2, 7.3 & 7.4(Carbon Equivalent Value (CEV))	-	1000.00	-
Cl-7.1, 7.2, 7.3 & 7.4(silicon)	-	500.00	-
Cl-7.1, 7.2, 7.3 & 7.4(aluminium)	-	500.00	-
Cl-7.1, 7.2, 7.3 & 7.4(Niobium)	-	500.00	-
Cl-7.1, 7.2, 7.3 & 7.4(Vanadium)	-	500.00	-
Cl-7.1, 7.2, 7.3 & 7.4(Titanium)	-	500.00	-
Cl-7.1, 7.2, 7.3 & 7.4(Nitrogen)	-	1500.00	-
Cl-7.1, 7.2, 7.3 & 7.4(Copper)	-	500.00	-
Cl-7.1, 7.2, 7.3 & 7.4(Mo + Cr +W)	-	1500.00	-
Cl-7.1, 7.2, 7.3 & 7.4(Mo)	-	500.00	-
Cl-7.1, 7.2, 7.3 & 7.4(Boron)	-	500.00	-
Cl-7.1, 7.2, 7.3 & 7.4(Nickel)	-	500.00	-
Cl-7.1, 7.2, 7.3 & 7.4(Chromium)	-	500.00	-
Cl-8.3, Table-5 & 6(Elongation at Gauge Length,)	-	500.00	-
Cl-8.3, Table-5 & 6(Tensile Strength, MPa)	-	500.00	-
Cl-8.3, Table-5 & 6(Yield Strength, MPa)	-	500.00	-
Cl-9.2(Bend test)	-	500.00	-
Cl-11(freedam from Defects)	-	500.00	-
Cl-12(Dimensions)	-	3000.00	-
Cl-14(Calculation of Mass)	-	500.00	-
Cl-7.1, 7.2, 7.3 & 7.4(Carbon)	-	500.00	-
Cl-7.1, 7.2, 7.3 & 7.4(Manganese)	-	500.00	-
Cl-7.1, 7.2, 7.3 & 7.4(Sulphur)	-	500.00	-
Cl-7.1, 7.2, 7.3 & 7.4(Phosphorus)	-	500.00	-
Cl-7.1, 7.2, 7.3 & 7.4(Carbon Equivalent Value (CEV))	-	1000.00	-
Cl-7.1, 7.2, 7.3 & 7.4(silicon)	-	500.00	-
Cl-7.1, 7.2, 7.3 & 7.4(aluminium)	-	500.00	-
Cl-7.1, 7.2, 7.3 & 7.4(Niobium)	-	500.00	-
Cl-7.1, 7.2, 7.3 & 7.4(Vanadium)	-	500.00	-
Cl-7.1, 7.2, 7.3 & 7.4(Titanium)	-	500.00	-
Cl-7.1, 7.2, 7.3 & 7.4(Nitrogen)	-	1500.00	-
Cl-7.1, 7.2, 7.3 & 7.4(Copper)	-	500.00	-
Cl-7.1, 7.2, 7.3 & 7.4(Mo + Cr +W)	-	1500.00	-
Cl-7.1, 7.2, 7.3 & 7.4(Mo)	-	500.00	-
Cl-7.1, 7.2, 7.3 & 7.4(Boron)	-	500.00	-
Cl-7.1, 7.2, 7.3 & 7.4(Nickel)	-	500.00	-
Cl-7.1, 7.2, 7.3 & 7.4(Chromium)	-	500.00	-
Cl-8.3, Table-5 & 6(Elongation at Gauge Length,)	-	500.00	-

06 Sep, 2027

-
Included w.e.f. 24.03.2026

1006

Dashmesh Test Lab Private Limited

8186926

IS 3315 (2024)

Direct Evaporative Air Cooler â Specification (Fourth Revision)

ALL TYPE

37500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Enclosure)	-	500	-
Cl-5.2(Filter Pads)	-	500	-
Cl-5.3(Sump Tank Capacities)	-	500	-
Cl-5.4(Blower/Fan)	-	500	-
Cl-5.4.3(Fan motor)	-	500	-
Cl-5.5(Pump Set)	-	500	-
Cl-5.6.1(Electrical wiring and connection)	-	500	-
Cl-5.6.2(Suitable power cable)	-	500	-
Cl-5.7(Switches)	-	500	-
Cl-6(Rating Requirement)	-	500	-
Cl-8.1(Performance Requirement)	-	5000	-
Cl-8.2(Sound Test)	-	2000	-
Cl-8.3(Air Delivery (Air Flow) Test)	-	3000	-
Cl-8.4(Cooling Efficiency Test)	-	5000	-
Cl-8.5(Power Consumption)	-	5000	-
Cl-8.6(EER Calculation Method)	-	5000	-
Cl-8.7(Drop Test)	-	500	-
Cl-8.8(Air Cooler Blower/Fan Reliability Test)	-	5000	-
Cl-12.2.1(General Running Tests)	-	500	-
Cl-12.2.2(Protection against Electric Shock)	-	200	-
Cl-12.2.3(High Voltage Tests)	-	500	-
Cl-12.2.4(Leakage Current)	-	200	-
Cl-12.2.5(Provision for Earthing)	-	100	-
Cl-12.2.6(Finish)	-	300	-
Cl-13(Additional Requirement for ECO-Mark)	-	0	-
Cl-14(Storage)	-	200	-

22 Jul, 2028

-
-

1007

Atharva Laboratories Pvt. Ltd. (C-54), Noida

8165026

IS 15844 : Part 1 (2023)

SPORTS FOOTWEAR PART -1 GENERAL PURPOSEFirst Revision

64000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl No.4.1(Sampling and Conditioning)	-	600	-
Cl No.4.2(Construction)	-	150	-
Cl No.4.3(Whole Footwear)	-	250	-
4.3.1(Insole)	-	250	-
4.3.2(Toe spring height)	-	500	-
4.3.3(Upper to Mid Sole/Out Sole Bond Performance)	-	1000	-
4.3.4("Upper to Composite Sole Bond Performance (Applicable Only When the Sole is Composite)")	-	1000	-
4.3.5(Out Sole to Mid Sole (Multilayer) Bond Performance)	-	1000	-
4.3.6(Energy Absorption at Seat Region)	-	1500	-
4.3.7(Complete Shoe Flexing)	-	1500	-
4.3.8(Washability)	-	0	-
4.3.9(Slip Resistance)	-	2500	-
Cl No.4.4 , Table No. 2 , i) , a)(Flexing resistance, Dry condition)	-	1500	-
Cl No.4.4 , Table No. 2 , i) , b)(Flexing resistance, Wet condition)	-	1500	-
Cl No.4.4 , Table No. 2 , ii)(Tear strength (average force), Min, N)	-	1000	-
Cl No.4.4 , Table No. 2 , iii) , a)("Colour fastness rubbing (To and fro) Grey scale rate, Min , Dry: (rubbing) Rating: (Marring and staining) ")	-	1500	-
Cl No.4.4 , Table No. 2 , iii) , b)("Colour fastness rubbing (To and fro) Grey scale rate, Min , Wet: (rubbing) Rating: (Marring and staining)")	-	1500	-
Cl No.4.4 , Table No. 2 , iv) , a)(Water vapour permeability, mg/cm2h, Min)	-	1200	-
Cl No.4.4 , Table No. 2 , iv) , b)(Water vapour coefficient, mg/cm2 , Min)	-	1200	-
Cl No.4.4 , Table No. 2 , v)(Stitch tear strength (double hole), N/mm, Min)	-	1000	-
Cl No.4.4 , Table No. 2 , vi)("Colour fastness to light (Optional) Grey scale rate, Min Rating: (Marring)")	-	0	-
Cl No.4.4 , Table No. 2 , i)(Breaking strength, N/mm, Min)	-	1000	-
Cl No.4.4 , Table No. 2 , ii)(Elongation at break, percent Min)	-	1000	-
Cl No.4.4 , Table No. 2 , iii)(Tear strength, N, Min For Fabric: For all other materials)	-	1000	-
Cl No.4.4 , Table No. 2 , iv) , a)(Flexing resistance, Dry condition)	-	1500	-
Cl No.4.4 , Table No. 2 , iv) , b)(Flexing resistance, ,Wet condition)	-	1500	-
Cl No.4.4 , Table No. 2 , v) , a)(Water vapour permeability, mg/cm2h, Min)	-	1200	-
Cl No.4.4 , Table No. 2 , v) , b)("Water vapour coefficient, mg/cm2 , Min ")	-	1200	-
Cl No.4.4 , Table No. 2 , vi)(Hydrolysis resistance)	-	2500	-
Cl No.4.4 , Table No. 2 , vii)(Bursting Strength, kg/cm2 , Min)	-	1200	-
Cl No.4.5 , Table No. 3 , i)(Tear strength, N, Min)	-	1000	-
Cl No.4.5 , Table No. 3 , ii)(Abrasion resistance, cycles)	-	1500	-
Cl No.4.5 , Table No. 3 , iii)("Colour fastness to rubbing (crocking), Grey scale rate with 10 rubs on dry or wet, Min")	-	1500	-
Cl No.4.5 , Table No. 3 , iv)("Colour fastness to perspiration (contact method) Grey scale rate, Min")	-	1500	-
Cl No.4.5 , Table No. 3 , v) , a)(Water vapour permeability, mg/cm2h, Min)	-	1200	-
Cl No.4.5 , Table No. 3 , v) , b)("Water vapour coefficient, mg/cm2 , Min ")	-	1200	-
Cl No.4.6 , Table No. 4 , i)(Thickness, mm, Min)	-	400	-
Cl No.4.6 , Table No. 4 , ii)(Flexing index, Min)	-	1500	-
Cl No.4.6 , Table No. 4 , iii)(Abrasion resistance, at 400 cycles)	-	500	-
Cl No.4.6 , Table No. 4 , iv) , a)(Water Absorption, mg/cm2 , Min)	-	1200	-
Cl No.4.6 , Table No. 4 , iv) , b)(Water Desorption, percent, Min)	-	1200	-
Cl No.4.7, Table No. 5 , i)(Thickness, mm, Min)	-	400	-
Cl No.4.7, Table No. 5 , ii)(Abrasion resistance, cycles)	-	1500	-
Cl No.4.7, Table No. 5 , iii) , a)(Water Absorption, mg/cm2 , Min)	-	1200	-
Cl No.4.7, Table No. 5 , iii) , b)(Water Desorption, percent, Min)	-	1200	-
Cl No.4.8 , Table No. 6 , i)(Abrasion resistance (Volume loss), mm3 , Max)	-	2000	-
Cl No.4.8 , Table No. 6 , ii)("Flexing resistance Belt Method at 90 diameter Mandrel or Bennewart method, cut growth, Max")	-	1200	-
Cl No.4.8 , Table No. 6 , iii)("Hydrolysis resistance, cut growth after 150 000 flexes, in mm, Max")	-	2500	-
Cl No.4.9 , Table No. 7 , i)(Compression set, percent, Max)	-	1500	-
Cl No.4.9 , Table No. 7 , ii)(Split tear strength, kg/25 mm, Min)	-	1000	-
Cl No.4.9 , Table No. 7 , iii)(Heat shrinkage, percent, Max)	-	1500	-
Cl No.4.10 , Table No. 8 , i)(First dry collapsing load, hardness, N, Min)	-	1000	-
Cl No.4.10 , Table No. 8 , ii)(Resilience, percent, Min)	-	1000	-
Cl No.4.10 , Table No. 8 , iii)(Moisture resistance, percent, Min)	-	1000	-
Cl No.4.10 , Table No. 8 , iv) , a)(Initial dry area shape retention, percent, Min)	-	1000	-
Cl No.4.10 , Table No. 8 , iv) , b)(Area shape retention after 10th collapse, dry, percent, Min)	-	1000	-
Cl No.4.11 , Table No. 9 , i)(Peel strength, N/mm, Min)	-	1200	-
Cl No.4.11 , Table No. 9 , ii)(Shear strength, kPa , Min)	-	1500	-
Cl No.4.12 , Table No. 10 , i)(Limit of useful extension, percent, Min)	-	1500	-
Cl No.4.13 , Table No. 11 , i)(Breaking strength of lace, N, Min)	-	1000	-
Cl No.4.13 , Table No. 11 , ii)(Lace tag strength, N, Min)	-	1000	-
Cl No.4.13 , Table No. 11 , iii)(Lace to lace abrasion,)	-	1200	-
Cl No.4.13 , Table No. 11 , iv)("Colour fastness to water Gray Scale Rate, Min Rating")	-	1500	-
Cl No.4.13 , Table No. 11 , v)(Strength of Buckle/Ski hook, N, Min)	-	1000	-
Cl No.4.13 , Table No. 11 , vi)(Corrosion resistance)	-	1500	-
Cl No . 4.14("Chemical Requirement on Complete Product for all Types of Sports Shoe")	-	30000	For Complete Chemical Testing
Cl No . 5(MARKING AND PACKING)	-	100	-
Cl No . 4.14, Table no. 1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	2500	-
Cl No . 4.14, Table no. 1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	3000	-
Cl No . 4.14, Table no. 1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	3000	-
Cl No . 4.14, Table no. 1 of IS 17011(iv)(Chromium (VI))	-	1500	-
Cl No . 4.14, Table no. 1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	4500	-
Cl No . 4.14, Table no. 1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	4500	-
Cl No . 4.14, Table no. 1 of IS 17011(vii)(Formaldehyde)	-	4500	-
Cl No . 4.14, Table no. 1 of IS 17011(viii)(Organotin compounds)	-	3000	-
Cl No . 4.14, Table no. 1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	3000	-
Cl No . 4.14, Table no. 1 of IS 17011(x)(pH)	-	800	-
Cl No . 4.14, Table no. 1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	2500	-
Cl No . 4.14, Table no. 1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	4500	-
Clause 4.2 - 4.2.1(Construction)	-	250	-
Clause 4.2 - 4.2.2(Construction)	-	250	-
Clause 4.3 - 4.3.1(Whole Footwear)	-	250	-
Clause 4.3 - 4.3.2(Whole Footwear)	-	250	-
Clause 4.3 - 4.3.3(Upper to Mid Sole/Out Sole Bond Performance)	-	1000	-
Clause 4.3 - 4.3.4(Upper to Composite Sole Bond Performance(Applicable Only When the Sole is Composite))	-	1000	-
Clause 4.3 - 4.3.5(Out Sole to Mid Sole (Multilayer) Bond)	-	1000	-
Clause 4.3 - 4.3.7(Complete Shoe Flexing)	-	1500	-
Clause 4.4, Table 1 ii)(Tear strength)	-	1000	-
Clause 4.4, Table 1 iv)-a(Water Vapour Permeability)	-	1200	-
Clause 4.4, Table 1 iv)-b(Water Vapour Coeffecient)	-	1200	-
Clause 4.4, Table 1 v)(Stitch Tear Strength(Double Hole))	-	1200	-
Clause 4.4, Table 2 i)(Breaking Strength)	-	1000	-
Clause 4.4, Table 2 ii)(Elongation at break)	-	1000	-
Clause 4.4, Table 2 iii)(Tear strength)	-	1000	-
Clause 4.4, Table 2 v)-a(Water Vapour Permeability)	-	1200	-
Clause 4.4, Table 2 v)-b(Water Vapour Coeffecient)	-	1200	-
Clause 4.5, Table 3 i)(Tear strength)	-	1000	-
Clause 4.5, Table 3 ii)(Abrasion Resistance)	-	1500	-
Clause 4.5, Table 3 v)-a(Water Vapour Permeability)	-	1200	-
Clause 4.5, Table 3 v)-b(Water Vapour Coeffecient)	-	1200	-
Clause 4.6, Table 4 i)(Thickness)	-	400	-
Clause 4.6, Table 4 ii)(Abrasion Resistance)	-	1200	-
Clause 4.6, Table 4 iv)-b(Water Desorption)	-	1200	-
Clause 4.7, Table 5 i)(Thickness)	-	400	-
Clause 4.7, Table 5 ii)(Abrasion Resistance)	-	1200	-
Clause 4.7, Table 5 iii)-a(Water Absorption)	-	1200	-
Clause 4.7, Table 5 iii)-b(Water Desorption)	-	1200	-
Clause 4.8, Table 6 i)(Abrasion Resistance)	-	1500	-
Clause 4.8, Table 6 ii)(Flexing Resistance)	-	1500	-
Clause 4.8, Table 6 iii)(Hydrolysis Resistance)	-	2500	-
Clause 4.9, Table 7 ii)(Split Tear strength)	-	1200	-
Clause 4.9, Table 7 iii)(Heat shrinkage)	-	1500	-
Cl-5, Table -1 S. No-(i) (Amendment No-1)(Insole)	-	250	-
Cl-5, Table -1 S. No- (ii) (Amendment No-1)(Toe spring height)	-	500	-
Cl-5, Table -1 S. No- (iii) (Amendment No-1)("Bond performance (a) Upper to sole/mid sole/composite sole (b) Interlayer bond strength")	-	1000	-
Cl-5, Table -1 S. No- (iv) (Amendment No-1)(Energy absorption at seat region)	-	1500	-
Cl-5, Table -1 S. No- (v) (Amendment No-1)(Complete shoe flexing)	-	1500	-
Cl-5, Table -1 S. No-(vi) (Amendment No-1)(Washability)	-	0	-
Cl-5, Table -1 S. No- (vii) (Amendment No-1)(Slip resistance, coefficient of friction (COF),)	-	2500	-
Cl-5, Table -1 S. No- (viii) (Amendment No-1)("Abrasion resistance a-Cellular sole b-Solid sole")	-	2000	-
Cl-5, Table -1 S. No- (x) (Amendment No-1)(Chemical requirements)	-	30000	-
Cl-5, Table -1 S. No- (xi) (Amendment No-1)(Hydrolysis resistance)	-	2500	-
Cl-5, Table -1 S. No- (xii) (Amendment No-1)(Lead content)	-	800	-
Cl-6, Table -2 S. No- (i) (Amendment No-1)(Tear strength)	-	1000	-
Cl-6, Table -2 S. No- (ii) (Amendment No-1)("Colour fastness rubbing a-Dry: (rubbing) b-Wet: (rubbing)")	-	1500	-
Cl-6, Table -2 S. No- (iii), a) (Amendment No-1)(Water vapour permeability)	-	1200	-
Cl-6, Table -2 S. No- (iii), b) (Amendment No-1)(Water vapour coefficient)	-	1200	-
Cl-6, Table -2 S. No- (iv),(Amendment No-1)(Stitch tear strength)	-	1000	-
Cl-6, Table -2 S. No- (v),(Amendment No-1)(Colour fastness to light grey scale rate,)	-	0	-
Cl-6, Table -3 S. No- (i),(Amendment No-1)(Breaking strength, N/mm, Min)	-	1000	-
Cl-6, Table -3 S. No- (ii),(Amendment No-1)("Elongation at break a-Tighter direction b-Stretch direction")	-	1000	-
Cl-6, Table -3 S. No- (iii),(Amendment No-1)("Tear strength, N, Min a) For fabric b) For all other materials")	-	1000	-
Cl-6, Table -3 S. No- (iv),(Amendment No-1)("Flexing resistance a- Dry condition b-Wet condition")	-	1500	-
Cl-6, Table -3 S. No- (v), a (Amendment No-1)(Water vapour permeability)	-	1200	-
Cl-6, Table -3 S. No- (v), b (Amendment No-1)(Water vapour coefficient)	-	1200	-
Cl-6, Table -3 S. No- (vi), (Amendment No-1)(Hydrolysis resistance)	-	2500	-
Cl-6, Table -3 S. No- (vii), (Amendment No-1)(Bursting strength)	-	1200	-
Cl-6, Table -4 S. No- (i),(Amendment No-1)(Tear strength, N, Min)	-	1000	-
Cl-6, Table -4 S. No- (ii),(Amendment No-1)("Abrasion resistance, cycles a- Dry condition b-Wet condition")	-	1500	-
Cl-6, Table -4 S. No- (iii),(Amendment No-1)(Colour fastness to rubbing , grey scale rate with 10 rubs on dry or wet, Min)	-	1500	-
Cl-6, Table -4 S. No- (iv),(Amendment No-1)(Colour fastness to perspiration)	-	1500	-
Cl-6, Table -4 S. No- (v), a (Amendment No-1)(Water vapour permeability)	-	1200	-
Cl-6, Table -4 S. No- (v), b (Amendment No-1)(Water vapour coefficient)	-	1200	-
Cl-6, Table -5 S. No- (i), (Amendment No-1)(Thickness, mm, Min)	-	400	-
Cl-6, Table -5 S. No-(ii), (Amendment No-1)(Flexing index, Min)	-	1500	-
Cl-6, Table -5 S. No-(iii), (Amendment No-1)(Abrasion resistance,)	-	1500	-
Cl-6, Table -5 S. No- (iv), a (Amendment No-1)(Water absorption)	-	1200	-
Cl-6, Table -5 S. No- (iv), b (Amendment No-1)(Water desorption, percent)	-	1200	-
Cl-6, Table -6 S. No- (i), (Amendment No-1)(Thickness, mm, Min)	-	400	-
Cl-6, Table -6 S. No- (ii), (Amendment No-1)("Abrasion resistance, cycles a- Dry condition b-Wet condition")	-	1500	-
Cl-6, Table -6 S. No- (iii),a (Amendment No-1)(Water absorption)	-	1200	-
Cl-6, Table -6 S. No- (iv), b (Amendment No-1)(Water desorption, percent)	-	1200	-
Cl-6, Table -7 S. No- (i), (Amendment No-1)(Flexing resistance (Belt method or Bennewart method))	-	1500	-
Cl-6, Table -7 S. No- (ii), (Amendment No-1)(Hydrolysis resistance, cut growth after flexes)	-	2500	-
Cl-6, Table -8 S. No- (i), (Amendment No-1)("Compression set, percent, Max a) For EVA b) For all other materials")	-	1500	-
Cl-6, Table -8 S. No- (ii), (Amendment No-1)(Split tear strength)	-	1000	-
Cl-6, Table -8 S. No- (iii), (Amendment No-1)(Heat shrinkage)	-	1500	-
Cl-6, Table -9 S. No- (i), (Amendment No-1)(First dry collapsing load, hardness)	-	1000	-
Cl-6, Table -9 S. No- (ii), (Amendment No-1)(Resilience, percent)	-	1000	-
Cl-6, Table -9 S. No- (iii), (Amendment No-1)(Moisture resistance)	-	1000	-
Cl-6, Table -9 S. No- (iv), a (Amendment No-1)(Initial dry area shape retention)	-	1000	-
Cl-6, Table -9 S. No- (iv), b (Amendment No-1)(Area shape retention after 10th collapse)	-	1000	-
Cl-6, Table -10 S. No- (i), (Amendment No-1)("Peel strength a) Initial b) After 5 000 wear cycles")	-	1000	-
Cl-6, Table -10 S. No- (ii), (Amendment No-1)("Shear strength a) Initial b) After 5 000 wear cycles")	-	1500	-
Cl-6, Table -11 S. No- (i), (Amendment No-1)(Limit of useful extension)	-	1500	-
Cl-6, Table -12 S. No- (i), (Amendment No-1)(Breaking strength of lace)	-	1000	-
Cl-6, Table -12 S. No- (ii), (Amendment No-1)(Lace tag strength)	-	1000	-
Cl-6, Table -12 S. No- (iii), (Amendment No-1)(Lace to lace abrasion)	-	1500	-
Cl-6, Table -12 S. No- (iv), (Amendment No-1)(Colour fastness to water (for lace) (contact method))	-	1500	-
Cl-6, Table -12 S. No- (iv), (Amendment No-1)(Colour fastness to water (for lace) (contact method))	-	1500	-
Cl-6, Table -12 S. No (v), (Amendment No-1)(Strength of buckle/ski hook)	-	1000	-
Cl-6, Table -12 S. No- (vi), (Amendment No-1)(Corrosion resistance)	-	2000	-
Cl.1.4.1 of IS 17011 (Table B Sl I )(Phthalate: DINP)	-	3000	-
Cl.1.4.1 of IS 17011 (Table B Sl II )(Phthalate:: DNOP)	-	3000	-
Cl.1.4.1 of IS 17011 (Table B Sl III )(Phthalate: DEHP)	-	3000	-
Cl.1.4.1 of IS 17011 (Table B Sl IV )(Phthalate: DIDP)	-	3000	-
Cl.1.4.1 of IS 17011 (Table B Sl V)(Phthalate: BBP)	-	3000	-
Cl.1.4.1 of IS 17011 (Table B Sl VI )(Phthalate:DBP)	-	3000	-
Cl.1.4.1 of IS 17011 (Table B Sl VII )(Phthalate: DIBP)	-	3000	-
Cl.4.1 (Annex-A Sl I )(Organotin: Dibutyltin)	-	3000	-
Cl.4.1 (Annex-A Sl II )(Organotin: Dibutyltin Dichloride)	-	3000	-
Cl.4.1 (Annex-A Sl III )(Organotin: Dioctyltin)	-	3000	-
Cl.4.1 (Annex-A Sl IV)(Organotin: Monobutyltin)	-	3000	-
Cl.4.1 (Annex-A Sl V )(Organotin: Tributyltin)	-	3000	-
Cl.4.1 (Annex-A Sl VI)(Organotin: Triphenyltin)	-	3000	-
Cl.4.1 (Annex-A Sl VII )(Organotin: Monoctyltin)	-	3000	-
Cl.4.1 (Annex-A Sl VIII)(Organotin: Bis (tributyltin) oxide)	-	3000	-
Cl.4.1 (Table B-1 Sl I)(Aromatic Amines: 4-aminobiphenyl)	-	3000	-
Cl.4.1 (Table B-1 Sl II)(Aromatic Amines: Benzidine)	-	3000	-
Cl.4.1 (Table B-1 Sl III)(Aromatic Amines: 4-chloro-o-toluidine)	-	3000	-
Cl.4.1 (Table B-1 Sl IV)(Aromatic Amines: 2-naphthylamine)	-	3000	-
Cl.4.1 (Table B-1 Sl V)(Aromatic Amines :o-aminoazotoluene)	-	3000	-
Cl.4.1 (Table B-1 Sl VI)(Aromatic Amines: 2-amino-4-nitrotoluenem)	-	3000	-
Cl.4.1 (Table B-1 Sl VII)(Aromatic Amines: p-chloroaniline)	-	3000	-
Cl.4.1 (Table B-1 Sl VIII)(Aromatic Amines: 2,4-diaminoanisole)	-	3000	-
Cl.4.1 (Table B-1 Sl IX)(Aromatic Amines : 4,4’- diaminodiphenylmethane:)	-	3000	-
Cl.4.1 (Table B-1 Sl X)(Aromatic Amines : 3,3’-dichlorobenzidine)	-	3000	-
Cl.4.1 (Table B-1 Sl XI)(Aromatic Amines : 3,3’-dimethoxybenzidine)	-	3000	-
Cl.4.1 (Table B-1 Sl XII)(Aromatic Amines : 3,3’-dimethylbenzidine)	-	3000	-
Cl.4.1 (Table B-1 Sl XIII)(Aromatic Amines: 3,3’-dimethyl-4,4’-diaminodiphenylmethane)	-	3000	-
Cl.4.1 (Table B-1 Sl XIV)(Aromatic Amines : p-cresi)	-	3000	-
Cl.4.1 (Table B-1 Sl XV)(Aromatic Amines : 4,4’-methylene-bis(2-chloroaniline):)	-	3000	-
Cl.4.1 (Table B-1 Sl XVI)(Aromatic Amines :4,4’-oxydianiline)	-	3000	-
Cl.4.1 (Table B-1 Sl XVII)(Aromatic Amines:4,4’-thiodianiline)	-	3000	-
Cl.4.1 (Table B-1 Sl XVIII)(Aromatic Amines :o-toluidine:)	-	3000	-
Cl.4.1 (Table B-1 Sl XIX)(Aromatic Amines: 2,4-toluylendiamine)	-	3000	-
Cl.4.1 (Table B-1 Sl XX)(Aromatic Amines: 2,4,5-trimethylaniline)	-	3000	-
Cl.4.1 (Table B-1 Sl XXI)(Aromatic Amines :2,4-dimethylaniline)	-	3000	-
Cl.4.1 (Table B-1 Sl XXII)(Aromatic Amines: 2,6-dimethylaniline:)	-	3000	-
Cl.4.1 (Table B-1 Sl XXIII)(Aromatic Amines :2-methoxyaniline)	-	3000	-
Cl.4.1 (Table B-1 Sl XXIV)(Aromatic Amines :4-aminoazobenzene)	-	3000	-
Cl.4.1 (Table B-3 Sl I)(Allergenic Disperse Dyes :Disperse blue 3)	-	3000	-
Cl.4.1 (Table B-3 Sl II)(Allergenic Disperse Dyes :Disperse blue 7)	-	3000	-
Cl.4.1 (Table B-3 Sl III)(Allergenic Disperse Dyes :Disperse blue 26)	-	3000	-
Cl.4.1 (Table B-3 Sl IV)(Allergenic Disperse Dyes :Disperse blue 102)	-	3000	-
Cl.4.1 (Table B-3 Sl V)(Allergenic Disperse Dyes: Disperse brown 1)	-	3000	-
Cl.4.1 (Table B-3 Sl VI)(Allergenic Disperse Dyes :Disperse yellow 1)	-	3000	-
Cl.4.1 (Table B-3 Sl VII)(Allergenic Disperse Dyes :Disperse yellow 9)	-	3000	-
Cl.4.1 (Table B-3 Sl VIII)(Allergenic Disperse Dyes :Disperse yellow 39)	-	3000	-
Cl.4.1 (Table B-3 Sl IX)(Allergenic Disperse Dyes :Disperse yellow 49)	-	3000	-
Cl.4.1 (Table B-3 Sl X)(Allergenic Disperse Dyes :Disperse orange 1)	-	3000	-
Cl.4.1 (Table B-3 Sl XI)(Allergenic Disperse Dyes :Disperse red 11)	-	3000	-
Cl.4.1 (Table B-3 Sl XII)(Allergenic Disperse Dyes :Disperse red 17)	-	3000	-
Cl.4.1 (Table B-3 Sl XIII)(Allergenic Disperse Dyes :Disperse yellow 7)	-	3000	-
Cl.4.1 (Table B-3 Sl XIV)(Allergenic Disperse Dyes :Disperse yellow 56)	-	3000	-
Cl.4.1 (Table B-3 Sl XV)(Allergenic Disperse Dyes :Disperse red 151)	-	3000	-
Cl.4.1 (Table B-3 Sl XVI)(Allergenic Disperse Dyes :Solvent red 23)	-	3000	-
Cl.4.1 (Table B-4 Sl I)(Carcinogenic Disperse Dyes :Navy blue)	-	3000	-
Cl.4.1 (Table B-4 Sl II)(Carcinogenic Disperse Dyes: Disperse blue 1)	-	3000	-
Cl.4.1 (Table B-4 Sl III)(Carcinogenic Disperse Dyes: Disperse blue 35)	-	3000	-
Cl.4.1 (Table B-4 Sl IV)(Carcinogenic Disperse Dyes :Disperse blue 106)	-	3000	-
Cl.4.1 (Table B-4 Sl V)(Carcinogenic Disperse Dyes: Disperse blue 124)	-	3000	-
Cl.4.1 (Table B-4 Sl VI)(Carcinogenic Disperse Dyes :Disperse yellow 3)	-	3000	-
Cl.4.1 (Table B-4 Sl VII)(Carcinogenic Disperse Dyes: Disperse orange 3)	-	3000	-
Cl.4.1 (Table B-4 Sl VIII)(Carcinogenic Disperse Dyes :Disperse orange 37/59/76a))	-	3000	-
Cl.4.1 (Table B-4 Sl IX)(Carcinogenic Disperse Dyes :Disperse red 1)	-	3000	-
Cl.4.1 (Table B-4 Sl X)(Carcinogenic Disperse Dyes :Basic red 9)	-	3000	-
Cl.4.1 (Table B-4 Sl XI)(Carcinogenic Disperse Dyes :Violet 3)	-	3000	-
Cl.4.1 (Table B-4 Sl XII)(Carcinogenic Disperse Dyes Disperse yellow 23)	-	3000	-
Clause 4.6, Table 4 iv)-a(Water Absorption)	-	1500	-

23 Feb, 2029

-
-

1008

Urja Metallurgical Services LLP

7194806

IS 12817 (2020)

Stainless Steel Butt Hinges - Specification ( Third Revision )

All Grade / Type / Size / Designation / Class

5800 View breakup
-

Clause No.	Exclusion	Remark
6.2, Table 1 to 6(Length , A -IS 12817)	-	-
6.2, Table 1 to 6(Breadth, B-IS 12817)	-	-
6.2, Table 1 to 6(Breadth, B1-IS 12817)	-	-
6.2, Table 1 to 6(Breadth, B2-IS 12817)	-	-
6.2, Table 1 to 6(Thickness of flap, C-IS 12817)	-	-
6.2, Table 1 to 6(Dia. of Hinge pin, D-IS 12817 )	-	-
6.2, Table 1 to 6(Number of Knuckles- IS 12817 )	-	-
6.2, Table 1 to 6(Number of Screw Holes -IS 12817 )	-	-
6.2, Table 1 to 6(Holes for Screw Number- IS 12817 )	-	-
7.1(General - IS 12817 )	-	-
7.2(Knuckles - IS 12817 )	-	-
7.3(Pins- IS 12817 )	-	-
7.4(Screw Holes- IS 12817 )	-	-
7.4.2(Position of screw holes - IS 12817 )	-	-
7.4.2, Fig 1(The distance of the screw holes from the end of the flap - IS 12817 )	-	-
8.0(Finish - IS 12817 )	-	-
Clause 4.1.2(Silicon (Pin) )	-	-
Clause 4.1.2(Phosphorus (Pin) )	-	-
Clause 4.1.2(Sulphur (Pin) )	-	-
Clause 4.1.2(Manganese (Pin) )	-	-
Clause 4.1.2(Carbon (Pin) )	-	-
Clause 4.1.1(Silicon (Flap) )	-	-
Clause 4.1.1(Phosphorus (Flap) )	-	-
Clause 4.1.1(Sulphur (Flap) )	-	-
Clause 4.1.1(Manganese (Flap) )	-	-
Clause 4.1.1(Carbon (Flap) )	-	-
Clause 7.4.2 (Dimension - Z )	-	-
Clause 7.4.2 (Dimension - Y )	-	-
Clause 7.4.2 (Dimension - X )	-	-
Clause 7.4.1(Number of holes)	-	-
As per Cl.4(Carbon)	-	-
As per Cl.4(Sulphur)	-	-
As per Cl.4(Phosphorus)	-	-
As per Cl.4(Manganese)	-	-
As per Cl.4(Nitrogen)	-	-
As per Cl.4(Silicon)	-	-
As per Cl.4(Aluminium)	-	-
As per Cl.4(Chromium)	-	-
As per Cl.4(Vanadium)	-	-
As per Cl.4(Molybdenum)	-	-
As per Cl.4(Niobium)	-	-
As per Cl.4(Nickel)	-	-
As per Cl.4(Copper)	-	-
As per Cl.4(Titanium)	-	-
As per Cl.4(Zirconium)	-	-
As per Cl.4(Tungsten)	-	-
As per Cl.4(Cerium)	-	-
Cl.4(Other Elements - IS 228 and its parts or any other intrumental/chemical methods)	-	-

23 Dec, 2028

-
Included w.e.f 24.02.2026

1009

ATCC TEST LABS LLP

8172626

IS 4246 (2025)

DOMESTIC GAS STOVE AND BUILT IN HOB FOR USE WITH LPG SPECIFICATION (Sixth Revision )

DOMESTIC GAS STOVE AND BUILT IN HOB FOR USE WITH LPG SPECIFICATION

26000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(General - IS 4246 : 2025)	-	500	-
4.1(General - IS 4246 : 2025)	-	0	-
4.1.1(General - IS 4246 : 2025)	-	0	-
5(Materials - Cl. 5 of IS 5116)	-	500	-
5.1.1(Materials - Toughened glass, if provided,)	-	500	-
5.1.1(Materials - Toughened glass, if provided,)	-	0	-
5.1.1(Materials - Toughened glass, if provided,)	-	0	-
5.1.1(Materials - Toughened glass, if provided,)	-	0	-
5.1.1(Materials - Toughened glass, if provided,)	-	0	-
5.1.1(Materials - Toughened glass, if provided,)	-	0	-
5.1.1(Materials - Toughened glass, if provided,)	-	0	-
5.1.1(Materials - Toughened glass, if provided,)	-	0	-
5.1.1(Materials - Toughened glass, if provided,)	-	0	-
5.1(Materials - IS 5116)	-	0	-
5.1(Materials - IS 5116)	-	0	-
5.1.1(Materials - IS 5116)	-	0	-
5.2(Materials - IS 5116)	-	500	-
5.2(Materials - IS 5116)	-	0	-
5.3(Materials - IS 5116)	-	500	-
5.5(Materials - IS 5116)	-	500	-
5.5(Materials - IS 5116)	-	0	-
5.5(Materials - IS 5116)	-	0	-
5.7(Materials - IS 5116)	-	500	-
6.1(Design for Maintainance)	-	500	-
6.1(Design for Maintainance)	-	0	-
6.2(Design for Maintainance)	-	500	-
6.2(Design for Maintainance)	-	500	-
6.3(Design for Maintainance)	-	500	-
6.4(Design for Maintainance)	-	500	-
6.5(Design for Maintainance)	-	500	-
6.6(Design for Maintainance)	-	500	-
7.0(Rigidity and Stability)	-	500	-
7.1(Rigidity and Stability)	-	500	-
7.2(Rigidity and Stability)	-	500	-
7.3(Rigidity and Stability)	-	500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	0	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	0	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	0	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	0	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	0	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	0	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	0	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	0	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	0	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	0	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	0	-
8.2(Workmanship and Finish -)	-	500	-
8.3(Workmanship and Finish -)	-	500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
10(Injector Jets)	-	500	-
10(Injector Jets)	-	0	-
10(Injector Jets)	-	0	-
10(Injector Jets)	-	0	-
10(Injector Jets)	-	0	-
10(Injector Jets)	-	0	-
11.1(Burners- Cl. 10 of IS 5116)	-	500	-
11.1(Burners- Cl. 10 of IS 5116)	-	0	-
11.1(Burners- Cl. 10 of IS 5116)	-	0	-
11.1(Burners- Cl. 10 of IS 5116)	-	0	-
11.1(Burners- Cl. 10 of IS 5116)	-	0	-
11.2(Burners)	-	500	-
11.3(Burners)	-	500	-
11.4(Burners)	-	500	-
12.1(Burner Pan Support)	-	500	-
12.2(Burner Pan Support)	-	500	-
12.3(Burner Pan Support)	-	0	-
13.1(Gas Soundness Test - Cl. 16 of IS 5116)	-	1000	-
13,2(Gas Soundness Test)	-	1000	-
13.2(Gas Leak Detector)	-	0	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	500	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	0	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	0	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	0	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	0	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	0	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	0	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	0	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	0	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	0	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	0	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	0	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	0	-
14.2(Gas Inlet Connection)	-	0	-
14.2(Gas Inlet Connection)	-	500	-
14.2(Gas Inlet Connection)	-	0	-
14.2(Gas Inlet Connection)	-	0	-
14.3(Gas Inlet Connection)	-	500	-
14.4(Gas Inlet Connection)	-	500	-
14.5(Gas Inlet Connection - Cl. 17.3 of IS 5116)	-	500	-
14.6(Gas Inlet Connection)	-	500	-
15.0(Strength and Rigidity)	-	500	-
15.0(Strength and Rigidity)	-	0	-
15.0(Strength and Rigidity)	-	0	-
15.0(Strength and Rigidity)	-	0	-
17.0(Gas Consumption Test)	-	5000	-
17.0(Gas Consumption Test)	-	5000	-
17.0(Gas Consumption Test)	-	0	-
17.0(Gas Consumption Test)	-	0	-
17.0(Gas Consumption Test)	-	0	-
17.0(Gas Consumption Test)	-	0	-
17.2(Gas Consumption Test - For Gas Stoves)	-	5000	-
17.2 (a)(Gas Consumption Test - For Gas Stoves)	-	0	-
17.2 (b)(Gas Consumption Test - For Gas Stoves)	-	0	-
17.2 (c)(Gas Consumption Test - For Gas Stoves)	-	0	-
17.3(Gas Consumption Test - For Built in Hobs)	-	5000	-
17.3.1(Gas Consumption Test - For Built in Hobs)	-	5000	-
17.3.2(Gas Consumption Test - For Built in Hobs)	-	5000	-
18.1(Ignition and Flame Travel)	-	500	-
18.1(Ignition and Flame Travel)	-	0	-
18.2(Ignition and Flame Travel)	-	500	-
18.3(Ignition and Flame Travel)	-	500	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	500	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	500	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	500	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	500	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	0	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	0	-
19.1(Flame Stability)	-	1000	-
19.1.1(Flame Stability)	-	1000	-
19.2(Flame Stability)	-	500	-
19.3(Flame Stability)	-	500	-
20(Noise Control)	-	500	-
21(Flash Back)	-	500	-
22(Formation of Soot)	-	500	-
23(Resistance to Draught)	-	500	-
24.1(Combustion)	-	1000	-
24.1(Combustion)	-	0	-
24.2(Combustion)	-	0	-
25.1(Fire Hazard and Limiting Temperatures)	-	2000	-
25.1(Fire Hazard and Limiting Temperatures)	-	2000	-
25.1(Fire Hazard and Limiting Temperatures)	-	0	-
25.1(Fire Hazard and Limiting Temperatures)	-	0	-
25.2(Fire Hazard and Limiting Temperatures)	-	0	-
26.1(Thermal Efficiency- Gas Stoves)	-	5000	-
26.1(Thermal Efficiency- Gas Stoves)	-	5000	-
26.1(Thermal Efficiency- Gas Stoves)	-	0	-
26.1(Thermal Efficiency- Gas Stoves)	-	0	-
26.1(Thermal Efficiency- Gas Stoves)	-	0	-
26.2(Thermal Efficiency- For Built in Hobs)	-	5000	-
26.2(Thermal Efficiency- For Built in Hobs)	-	5000	-
26.2(Thermal Efficiency- For Built in Hobs)	-	5000	-
26.2(Thermal Efficiency- For Built in Hobs)	-	5000	-
26.2(Thermal Efficiency- For Built in Hobs)	-	5000	-
5.1.1(Materials - IS 5116)	-	1000	-
4.1(General - IS 4246 : 2025)	-	500	-
4.1(General - IS 4246 : 2025)	-	0	-
4.1.1(General - IS 4246 : 2025)	-	0	-
5(Materials - Cl. 5 of IS 5116)	-	500	-
5.1.1(Materials - Toughened glass, if provided,)	-	0	-
5.1.1(Materials - Toughened glass, if provided,)	-	0	-
5.1.1(Materials - Toughened glass, if provided,)	-	0	-
5.1.1(Materials - Toughened glass, if provided,)	-	0	-
5.1.1(Materials - Toughened glass, if provided,)	-	0	-
5.1.1(Materials - Toughened glass, if provided,)	-	0	-
5.1.1(Materials - Toughened glass, if provided,)	-	0	-
5.1.1(Materials - Toughened glass, if provided,)	-	0	-
5.1.1(Materials - Toughened glass, if provided,)	-	0	-
5.1(Materials - IS 5116)	-	0	-
5.1(Materials - IS 5116)	-	0	-
5.1.1(Materials - IS 5116)	-	0	-
5.2(Materials - IS 5116)	-	500	-
5.2(Materials - IS 5116)	-	0	-
5.3(Materials - IS 5116)	-	500	-
5.5(Materials - IS 5116)	-	0	-
5.5(Materials - IS 5116)	-	500	-
5.5(Materials - IS 5116)	-	0	-
5.7(Materials - IS 5116)	-	500	-
6.1(Design for Maintainance)	-	500	-
6.1(Design for Maintainance)	-	0	-
6.2(Design for Maintainance)	-	0	-
6.2(Design for Maintainance)	-	0	-
6.3(Design for Maintainance)	-	500	-
6.4(Design for Maintainance)	-	500	-
6.5(Design for Maintainance)	-	500	-
6.6(Design for Maintainance)	-	500	-
7.0(Rigidity and Stability)	-	500	-
7.1(Rigidity and Stability)	-	500	-
7.2(Rigidity and Stability)	-	500	-
7.3(Rigidity and Stability)	-	500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	0	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	0	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	0	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	0	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	0	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	0	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	0	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	0	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	0	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	0	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	0	-
8.2(Workmanship and Finish -)	-	0	-
8.3(Workmanship and Finish -)	-	500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	0	-
10(Injector Jets)	-	1000	-
10(Injector Jets)	-	0	-
10(Injector Jets)	-	0	-
10(Injector Jets)	-	0	-
10(Injector Jets)	-	0	-
10(Injector Jets)	-	0	-
11.1(Burners- Cl. 10 of IS 5116)	-	500	-
11.1(Burners- Cl. 10 of IS 5116)	-	0	-
11.1(Burners- Cl. 10 of IS 5116)	-	0	-
11.1(Burners- Cl. 10 of IS 5116)	-	0	-
11.1(Burners- Cl. 10 of IS 5116)	-	0	-
11.2(Burners)	-	500	-
11.3(Burners)	-	500	-
11.4(Burners)	-	500	-
12.1(Burner Pan Support)	-	500	-
12.2(Burner Pan Support)	-	0	-
12.3(Burner Pan Support)	-	0	-
13.1(Gas Soundness Test - Cl. 16 of IS 5116)	-	1000	-
13,2(Gas Soundness Test)	-	1000	-
13.2(Gas Leak Detector)	-	1000	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	1000	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	0	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	0	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	0	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	0	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	0	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	0	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	0	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	0	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	0	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	0	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	0	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	0	-
14.2(Gas Inlet Connection)	-	500	-
14.2(Gas Inlet Connection)	-	0	-
14.2(Gas Inlet Connection)	-	0	-
14.2(Gas Inlet Connection)	-	0	-
14.3(Gas Inlet Connection)	-	500	-
14.4(Gas Inlet Connection)	-	500	-
14.5(Gas Inlet Connection - Cl. 17.3 of IS 5116)	-	500	-
14.6(Gas Inlet Connection)	-	500	-
15.0(Strength and Rigidity)	-	500	-
15.0(Strength and Rigidity)	-	0	-
15.0(Strength and Rigidity)	-	0	-
15.0(Strength and Rigidity)	-	0	-
17.0(Gas Consumption Test)	-	5000	-
17.0(Gas Consumption Test)	-	0	-
17.0(Gas Consumption Test)	-	0	-
17.0(Gas Consumption Test)	-	0	-
17.0(Gas Consumption Test)	-	0	-
17.0(Gas Consumption Test)	-	0	-
17.2(Gas Consumption Test - For Gas Stoves)	-	5000	-
17.2 (a)(Gas Consumption Test - For Gas Stoves)	-	0	-
17.2 (b)(Gas Consumption Test - For Gas Stoves)	-	0	-
17.2 (c)(Gas Consumption Test - For Gas Stoves)	-	0	-
17.3(Gas Consumption Test - For Built in Hobs)	-	5000	-
17.3.1(Gas Consumption Test - For Built in Hobs)	-	0	-
17.3.2(Gas Consumption Test - For Built in Hobs)	-	0	-
18.1(Ignition and Flame Travel)	-	500	-
18.1(Ignition and Flame Travel)	-	500	-
18.2(Ignition and Flame Travel)	-	0	-
18.3(Ignition and Flame Travel)	-	0	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	0	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	0	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	0	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	0	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	0	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	0	-
19.1(Flame Stability)	-	500	-
19.1.1(Flame Stability)	-	0	-
19.2(Flame Stability)	-	0	-
19.3(Flame Stability)	-	0	-
20(Noise Control)	-	1000	-
21(Flash Back)	-	500	-
22(Formation of Soot)	-	500	-
23(Resistance to Draught)	-	500	-
24.1(Combustion)	-	500	-
24.1(Combustion)	-	0	-
24.2(Combustion)	-	0	-
25.1(Fire Hazard and Limiting Temperatures)	-	500	-
25.1(Fire Hazard and Limiting Temperatures)	-	0	-
25.1(Fire Hazard and Limiting Temperatures)	-	0	-
25.1(Fire Hazard and Limiting Temperatures)	-	0	-
25.2(Fire Hazard and Limiting Temperatures)	-	0	-
26.1(Thermal Efficiency- Gas Stoves)	-	5000	-
26.1(Thermal Efficiency- Gas Stoves)	-	0	-
26.1(Thermal Efficiency- Gas Stoves)	-	0	-
26.1(Thermal Efficiency- Gas Stoves)	-	0	-
26.1(Thermal Efficiency- Gas Stoves)	-	0	-
26.2(Thermal Efficiency- For Built in Hobs)	-	5000	-
26.2(Thermal Efficiency- For Built in Hobs)	-	0	-
26.2(Thermal Efficiency- For Built in Hobs)	-	0	-
26.2(Thermal Efficiency- For Built in Hobs)	-	0	-
26.2(Thermal Efficiency- For Built in Hobs)	-	0	-
5.1.1(Materials - IS 5116)	-	1000	-

15 Jun, 2026

-
Included w.e.f. 17.03.2026

1010

Urja Metallurgical Services LLP

7194806

IS 1364 : Part 2 (2023)

Hexagon head bolts screws and nuts of product grades A and B Part 2 Hexagon head screws (Size range M1.6 to M64 ) (Sixth revision of IS 1364 (Part 2))

All Grade / Type / Size / Designation / Class

10300 View breakup
-

Clause No.	Exclusion	Remark
Cl-4(Dimensions)	-	-
Cl-5, Table-5(General requirements)	-	-
Cl-5, Table-5(Thread-Tolerance class)	-	-
Cl-5, Table-5(Mechanical properties-Steel)	-	-
Cl-5, Table-5(Mechanical properties-Stainless steel)	-	-
Cl-5, Table-5(Tolerances- Product grade)	-	-
Cl-5, Table-5(Surface condition -Electroplated coatings)	-	-
Cl-5, Table-5(Surface condition- Non-electrolytically applied zinc flake)	-	-
Cl-5, Table-5(Surface condition - Hot dip galvanized coatings)	-	-
Cl-5, Table-5("Surface integrity -Limits for surface discontinuities")	-	-
Cl-6(Marking)	-	-

23 Dec, 2028

-
Included w.e.f 27.01.2026

1011

IDMA LABORATORIES LIMITED, PANCHKULA

9123236

IS 11019 (2025)

Carbofuran technical - Specification (first revision)

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1("Description ( IS 11019: 2025 )")	-	500	-
3.2, Table 1 (i)(Carbofuran Content (IS 9360 : 2024))	-	3000	-
3.2, Table 1 (ii)(Moisture (IS 6940 : 2025)	-	1500	-
3.2, Table 1 (iii)(Alkalinity (as NaOH) (IS 6940 : 2025))	-	1000	-

31 Dec, 2026

-
included w.e.f 17.03.2026

1012

IDMA LABORATORIES LIMITED, PANCHKULA

9123236

IS 9825 (2025)

Chlorine Tablets - Specification (Third Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2("Description ( IS 9825: 2025 )")	-	500	-
4.3("Mass of Tablets ( IS 9825: 2025 )")	-	1000	-
4.3("Available Chlorine ( IS 9825: 2025 )")	-	2000	-
4.4("Moisture ( IS 9825: 2025 )")	-	1500	-
4.5(Shelf Life (Amount of chlorine as per mass of tablet )( IS 9825: 2025 ))	-	5000	-

31 Dec, 2026

-
-

1013

IDMA LABORATORIES LIMITED, PANCHKULA

9123236

IS 6438 (2025)

Aluminium phosphide formulations - Specification (second revision)

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-3.1(Constituents)	-	0	Test Not Applicable
Cl-3.2.1(Physical- Description of material)	-	1500	Testing charges for Cl. No. 3.2.1. Description and Average mass of 20 tablets or Pellets are Rs. 1500/-
Cl-3.3.1(Aluminium Phosphide Content)	-	2500	-
Cl-3.3.2(Evolation of Phosphide Gas)	-	1000	-
Cl-5(Marking)	-	0	Test Not Applicable

31 Dec, 2026

-
included w.e.f 17.03.2026

1014

ADS LABTECH, GHAZIABAD

8178326

IS 14735 (1999)

Unplasticized Polyvinyl Chloride (UPVC) Injection Moulded Fittings for Soil and Waste Discharge System for Inside and Outside Buildings Including Ventilation and Rain Water System -

UNPLASTICIZED POLYVINYLCHLORIDE (UPVC) INJECTION MOULDEDFITTINGS

10500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.14, Annex A(Titanium Di-Oxide Content)	-	700	-
Cl.13, IS 12235 (P-7)-2004, (Resistance to Sulphuric Acid)	-	500	-
Cl.15, Annex B(Sulphated Ash Content)	-	500	-
12.4(Effect on water test)	-	3000	all included test of effect on water
Cl 12.4(Effect on Water Lead (first extraction))	-	3000	all included test of effect on water
Cl 12.4(Effect on Water Lead (third extraction))	-	3000	all included test of effect on water
Cl 12.4(Effect on Water Dialkyl tin C4 and higher homologues(measured as tin )(third extraction ))	-	3000	all included test of effect on water
Cl 12.4(Effect on Water Cadmium (mean of first extraction, second extraction and third extraction))	-	3000	all included test of effect on water
Cl 12.4(Effect on Water Mercury (mean of first extraction, second extraction and third extraction))	-	3000	all included test of effect on water
19(Marking)	-	0	-
3(Type of Fitting)	-	200	-
4(Size Designation)	-	200	-
5(Colour of fittings)	-	200	-
7.1,Table 1(Wall thickness)	-	500	-
7.2 ,Table 2&3(Socket Dimensions)	-	200	-
7.3(Dimensions of waste trap(Nahani Trap)	-	200	-
8(Sealing Rings)	-	250	-
10(Workmanship)	-	0	-
11(Design requirements)	-	0	-
11.1(Solvent cement type or Rubber ring type)	-	500	-
11.2(Socket and spigot configeration)	-	200	-
11.4,Table 5(Vent cowl)	-	200	-
11.5,Table 6(Pipe Clips)	-	500	-
12(Physical test requirements)	-	1000	-
12.1(Visual appearance)	-	0	-
12.2(Stress relief test)	-	1000	-
12.3(Vicat softening tempewrature)	-	700	-
16(Mechanical Properties)	-	1000	-
16.1(Impact test)	-	1200	-
17(Watet tightness of joint)	-	1500	-
7.4(Chamfer)	-	200	-
11.3(Access Openings)	-	200	-
Table 4(Dimension of Access Openings)	-	300	-

15 May, 2027

-
Included w.e.f. 06.02.2026

1015

Standard Testing and Research Lab

9197206

IS 12823 (2025)

Prelaminated Medium Density Particle Boards from Wood and other Lignocellulosic Material Specification (Second Revision)

All Grade

11000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
As per Clause 5(Material - IS 3087)	-	11000	-
As per Clause 8 Table 2(Length -IS 2380 (Part 2))	-	11000	-
As per Clause 8 Table 2(Width - IS 2380 (Part 2))	-	11000	-
As per Clause 8 Table 2(Thickness - IS 2380 (Part 2))	-	11000	-
As per Clause 8 Table 2(Squareness, Max -IS 2380 (Part 2))	-	11000	-
As per Clause 8 Table 2(Edge Straighness, Max - IS 2380 (Part 2))	-	11000	-
As per Clause 9.1 Table 3(Density -IS 2380 (Part 3))	-	11000	-
As per Clause 9.1 Table 3(Variation from mean density, --IS 2380 (Part 3))	-	11000	-
As per Clause 9.1 Table 3(Moisture Content -IS 2380 (Part 3))	-	11000	-
As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Modulus of rupture (MoR), Min.-IS 2380 (Part 4))	-	11000	-
As per Clause 9.1 Table 4, Table 6, Table 7(Modulus of elasticity (MoE), Min. -(IS 2380 (Part 4))	-	11000	-
As per Clause 9.1 Table 4, Table 5, Table 6, Table7(Internal bond strength, Min. - IS 2380 (Part 5))	-	11000	-
As per Clause 9.1 Table 6, Table 7(24 h thickness swelling (due to general absorption) Max. - IS 2380 (Part 17))	-	11000	-
As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Screw withdrawal strength (face) , Min. -IS 2380 (Part 4))	-	11000	-
As per Clause 9.1 Table 4, Table 5, table 6, Table 7(Screw withdrawal strength (edge) , Min. -IS 2380 (Part 4))	-	11000	-
As per Clause 9.1 , Table 6, Table 7(Moisture Resistance : Option 1 : Cyclic test (1. )Internal bond strength Min. -IS 2380 (Part 5) see note 1)	-	11000	-
As per Clause 9.1 , Table 6, Table 7(Moisture Resistance : Option 2 : Boil test (1.) Internal bond strength , Min.- IS 2380 (Part 5) see note 2)	-	11000	-
As per Clause 9.1 , Table 8(Abrasion resistance in number of revolutions Min. --Annex. B)	-	11000	-
As per Clause 9.1 , Table 8(Resiatnce to stream/water vapour - Annex. C)	-	11000	-
As per Clause 9.1 , Table 8(Resitance to crack -Annex. D)	-	11000	-
As per Clause 9.1 , Table 8(Resistance to cigarette burn -Annex. E)	-	11000	-
As per Clause 9.1 , Table 8(Resiatnce to stain - Annex. F)	-	11000	-
As per Clause 9.1 , Table 9(Formaldehyde content Fc, mg/100 g for oven dry board -IS 13745)	-	11000	-
As per Clause 9.1 , Table 9(Steady-state formaldehyde emission, Fc, mg/m3 (optional test))	-	0	-

24 Feb, 2029

-
Exclusion: As per Clause 9.1 , Table 9 (Steady-state formaldehyde emission, Fc, mg/m3 (optional test))

1016

IDMA LABORATORIES LIMITED, PANCHKULA

9123236

IS 5158 (2025)

Phthalic Anhydride, Technical - Specification (Third Revision)

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1, 3.1.1("Description ( IS 5158: 2025 )")	-	500	-
3.1, 3.1.2("Description ( IS 5158: 2025 )")	-	500	-
3.2, Table - 1 (i)(Crystallization point ( IS 5158: 2025 ))	-	1500	-
3.2, Table - 1 (ii)(Colour of the molten material, Pt-Co scale ( IS 5158: 2025 ))	-	1000	-
3.2, Table - 1 (iii)(Colour of the molten material after heat treatment, Pt-Co scale ( IS 5158: 2025 ))	-	1000	-
3.2, Table - 1 (iv)(Free Acidity [as C6H4(COOH)2] ( IS 5158: 2025 ))	-	1000	-
3.2, Table - 1 (v)(Purity by GC ( IS 5158: 2025 ))	-	2500	-
3.2, Table - 1 (vi)(Maleic Anhydride and other oxidizable impurities (as C4H2O3) ( IS 5158: 2025 ))	-	1000	-
3.2, Table - 1 (vii)(Ash ( IS 5158: 2025 ))	-	1000	-
3.2, Table - 1 (viii)(Iron ( IS 5158: 2025 ))	-	1000	-
3.2, Table - 1 (ix)(Naphthaquinone ( IS 5158: 2025 ))	-	1000	-
3.2, Table - 1 (x)(Naphthalene ( IS 5158: 2025 ))	-	1000	-
3.2, Table - 1 (xi)(Phthalimide ( IS 5158: 2025 ))	-	1000	-

31 Dec, 2026

-
included w.e.f 17.02.2026

1017

Atmy Analytical Labs Pvt. Ltd., Faridabad

8167506

IS 14929 (2022)

Mixed polyolefin fibre ropes (first revision)

14500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5(Materials)	-	1500	-
Cl-6.1(Mixed polyolefin fibre ropes)	-	1500	-
Cl-6.2(Construction and manufacture)	-	1000	-
Cl-6.2(Lay)	-	1000	-
Cl-6.2(Labelling)	-	1000	-
Cl-6.2(Packaging, invoicing and delivery length)	-	500	-
Cl-7, Table-1(Linear densitybc- Nominal ktex)	-	1500	-
Cl-7, Table-1(Linear densitybc- Tolerance %)	-	0	-
Cl-7, Table-1(Minimum breaking force de - Unspliced ropes)	-	2500	-
Cl-7, Table-1(Minimum breaking forcede- Ropes with eye-spliced terminations)	-	2500	-
Cl-7, Table-2(Linear densitybc- Nominal ktex)	-	2000	-
Cl-7, Table-2(Linear densitybc- Tolerance %)	-	0	-
Cl-7, Table-2(Minimum breaking force de- Unspliced ropes)	-	2500	-
Cl-7, Table-2(Minimum breaking forcede - Ropes with eye-spliced terminations)	-	2500	-
Cl-5(Materials)	-	0	-
Cl-6.1(Mixed polyolefin fibre ropes)	-	0	-
Cl-6.2(Construction and manufacture)	-	0	-
Cl-6.2(Lay)	-	0	-
Cl-6.2(Labelling)	-	0	-
Cl-6.2(Packaging, invoicing and delivery length)	-	0	-
Cl-7, Table-1(Linear densitybc- Nominal ktex)	-	0	-
Cl-7, Table-1(Linear densitybc- Tolerance %)	-	0	-
Cl-7, Table-1(Minimum breaking force de - Unspliced ropes)	-	0	-
Cl-7, Table-1(Minimum breaking forcede- Ropes with eye-spliced terminations)	-	0	-
Cl-7, Table-2(Linear densitybc- Nominal ktex)	-	0	-
Cl-7, Table-2(Linear densitybc- Tolerance %)	-	0	-
Cl-7, Table-2(Minimum breaking force de- Unspliced ropes)	-	0	-
Cl-7, Table-2(Minimum breaking forcede - Ropes with eye-spliced terminations)	-	0	-

25 Feb, 2027

-
Included w.e.f. 10.02.2026

1018

National Test House (NER) - NTH, Guwahati

5169204

IS 694 (2010)

Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 450/750 v (Fourth Revision)

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
13(Cable code)	-	0	-
11.2(Legibility)	-	0	-
11.1(Durability)	-	0	-
11(Identification)	-	0	-
10.4(Flammability test- Unaffected portion)	-	250	-
10.4(Flammability test-Burning after flame removal)	-	250	-
table 1 e) 3) (IR constant- Room temp )	-	500	-
table 1 e) 3) (Volume Resistivity - Maximum temp)	-	500	-
table 1 e) 3) (Volume Resistivity - Room temp )	-	500	-
10.2(HV (room temperature))	-	1500	-
10.1(HV (water immersion))	-	3000	-
10.1(HV (water immersion))	-	3000	-
10.8(Smoke density rating)	-	5000	-
10.6(Halogen evolution)	-	5000	-
10.7(Temperature index)	-	5000	-
10.5(Oxygen index)	-	5000	-
Table 1 iii) c) 8)(Cold bend for insulation)	-	1000	-
Table 1 iii) d) 7)(Thermal stability- Sheath )	-	1000	-
Table 1 iii) c) 7)(Thermal stability- Insulation )	-	1000	-
Table 1 iii) d) 6)(Hot deformation -Indentation depth - Sheath )	-	500	-
Table 1 iii) c) 6)(Hot deformation - Indentation depth- Insulation)	-	500	-
Table 1 iii) d) 3)(Sheath- Elongation variation)	-	500	-
Table 1 iii) d) 3)(Sheath- TS variation)	-	500	-
Table 1 iii) d) 3)(Sheath- Elongation (After ageing))	-	500	-
Table 1 iii) d) 3)(Sheath- Tensile strength (After ageing))	-	500	-
Table 1 iii) d) 1)(Sheath- Elongation (Without ageing))	-	500	-
Table 1 iii) d) 1)(Sheath -Tensile strength (Without ageing))	-	500	-
Table 1 iii) c) 3)(Elongation variation)	-	500	-
Table 1 iii) c) 3)(TS variation)	-	500	-
Table 1 iii) c) 3)(Elongation (After ageing))	-	500	-
Table 1 iii) c) 3)(Tensile strength (After ageing))	-	500	-
Table 1 iii) c) 1)(Elongation (Without ageing))	-	500	-
Table 1 iii) c) 1)(Tensile strength (Without ageing))	-	500	-
8.3(Thickness of Sheath)	-	250	-
5.3(Thickness of Insulation)	-	250	-
4.2(Conductor resistance test)	-	1500	-
4.1(Wrapping test (for Al))	-	500	-
9.1(Ovality)	-	250	-
Table 1 iii) d) 4)(Shrinkage- Sheath )	-	500	-
Table 1 iii) c) 4)(Shrinkage-Insulation)	-	500	-
Table 1 iii) d) 5)(Heat shock-Sheath )	-	500	-
Table 1 iii) c) 5)(Heat shock-Insulation )	-	500	-
Table 1 iii) d) 4)(Cracks Observed)	-	500	-
Table 1 iii) d) 2)(Loss of mass- Sheath )	-	1500	-
Table 1 iii) c) 2)(Loss of mass- Insulation )	-	1500	-
9(Overall dimensions)	-	250	-
4.1(Annealing test (for copper))	-	1000	-
4.1(Tensile test (for Al)- After Stranding)	-	1000	-
4.1(Tensile test (for Al)-Before Stranding)	-	1000	-
table 1 e) 3) (IR constant- max. Temp)	-	500	-
(Cl.16.1) (Cl.19.1)(Conductor- Diameter )	-	250	-
(Cl. 18.1.3) (Cl. 19.1.4) (Cl. 20.1.3) (Cl. 21.1.3) (Cl. 22.1.3)(Assembly of cores )	-	0	-
7(Binder Tape)	-	0	-
15(PACKING AND MARKING)	-	0	-
10.9(Additional Ageing Test (for Cables for Outdoor Use)	-	2000	-
9(OVERALL DIMENSIONS)	-	250	-
Cl. 8.2(Application of Sheath)	-	0	-
Cl.19.1.4(Assembly of Cores)	-	0	-
Table 1 iii) d) 9)(Cold impact for sheath)	-	1000	-
Table 1 iii) c) 9)(Cold impact for insulation)	-	1000	-
Table 1 iii) d) 8)(Cold bend for sheath)	-	1000	-
Table 1 iii) c) 4)(Cracks Observed)	-	500	-
10.1(High Voltage Test (Water Immersion Test))	-	3000	-
10.4(Flammability Test)	-	500	-
10.11(Per sulphate test (for tinned Cu cable only))	-	1000	-
12(CONSTRUCTION Core Identification)	-	0	-
16.1(Construction)	-	0	-
16.2(Tests)	-	0	-
(Cl. 18.1.4) (Cl. 19.1.5) (Cl. 20.1.4) (Cl. 22.1.4)(Colour of Sheath)	-	0	-
10.9(Additional ageing test (OU cables only) -HV test (at 60±3oC))	-	2000	-
8.1(Sheath Material )	-	0	-
12.0(Core identification)	-	0	-
Table 1(Category Code)	-	0	-
5.3(Minimum thickness of insulation)	-	250	-
5.3(Avarage thickness of insulation)	-	250	-
10.8(Smoke Density Rating)	-	5000	-
12(CORE IDENTIFICATION)	-	0	-
13(CABLE CODE)	-	0	-
4.1(Conductor - Material)	-	0	-
4.1(Conductor - Material)	-	0	-
5.3(Thickness of Insulation)	-	250	-
10.9(Additional Ageing Test (for Cables for Outdoor Use)	-	2000	-
9(OVERALL DIMENSIONS)	-	250	-
Cl. 8.2(Application of Sheath)	-	0	-
Cl.19.1.4(Assembly of Cores)	-	0	-
16.1(Construction)	-	0	-
16.2(Tests)	-	0	-
12(CORE IDENTIFICATION)	-	0	-
5.3(Thickness of Insulation)	-	250	-
10.9(Additional Ageing Test (for Cables for Outdoor Use)	-	2000	-
9(OVERALL DIMENSIONS)	-	500	-
Cl. 8.2(Application of Sheath)	-	0	-
Cl.19.1.4(Assembly of Cores)	-	0	-
16.1(Construction)	-	0	-
16.2(Tests)	-	0	-
12(CORE IDENTIFICATION)	-	0	-
5.3(Thickness of Insulation)	-	250	-
10.9(Additional Ageing Test (for Cables for Outdoor Use)	-	2000	-
9(OVERALL DIMENSIONS)	-	500	-
Cl. 8.2(Application of Sheath)	-	0	-
Cl.19.1.4(Assembly of Cores)	-	0	-
16.1(Construction)	-	0	-
16.2(Tests)	-	0	-
12(CORE IDENTIFICATION)	-	0	-
5.3(Thickness of Insulation)	-	250	-
10.9(Additional Ageing Test (for Cables for Outdoor Use)	-	2000	-
9(OVERALL DIMENSIONS)	-	250	-
Cl. 8.2(Application of Sheath)	-	0	-
Cl.19.1.4(Assembly of Cores)	-	0	-
16.1(Construction)	-	0	-
16.2(Tests)	-	0	-
12(CORE IDENTIFICATION)	-	0	-

13 Dec, 2027

-
Included w.e.f 12.02.2026 Exclusion: Cl 10.3 (Spark Test)

1019

IDMA LABORATORIES LIMITED, PANCHKULA

9123236

IS 3902 (2025)

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-3.1(Description)	-	1000	-
Cl-3.2, Table-1, (i)(Dimethoate content, percent by mass, Min)	-	3500	-
Cl-3.2, Table-1, (ii)(Water content, percent by mass, Max)	-	1500	-
Cl-3.2, Table-1, (iii)(Material insoluble in acetone, percent by mass, Max)	-	1500	-
Cl-3.2, Table-1, (iv)(Acidity (as H2SO4), percent by mass, Max)	-	1500	-
Cl-5(Marking)	-	0	Test not applicable

31 Dec, 2026

-
included w.e.f 22.01.2026

1020

Stellar Test House, Noida

8171606

IS 1542 (1992)

Sand for plaster - Secification (Second Revision)

All types and grade

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(General)	-	500	-
4.2(Deterious Materials)	-	6000	-
4.3(Limits of Deleterious Materials)	-	1000	-
5(Grading of Sand)	-	1000	-
7(ADDITIONAL INFORMATION TO BE FURNISHED BY THE SUPPLIER)	-	0	-
4.1(General)	-	0	-
4.2(Deterious Materials)	-	0	-
4.3(Limits of Deleterious Materials)	-	0	-
5(Grading of Sand)	-	0	-
7(ADDITIONAL INFORMATION TO BE FURNISHED BY THE SUPPLIER)	-	0	-

26 Sep, 2028

-
included w.e.f 01.04.2026

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number