BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

12013 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

11731

BIS, Central Laboratory (CL)

None

IS 733 (1983)

Specification for wrought aluminium and aluminium alloy bars, rods and sections (For General Engineering Purposes) (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Table-1, Clause - 5.1 (Copper)	-
Table-1, Clause - 5.1 (Iron)	-
Table-1, Clause - 5.1 (Magnesium)	-
Table-1, Clause - 5.1 (Manganese)	-
Table-1, Clause - 5.1 (Titanium)	-
Table-1, Clause - 5.1 (Silicon)	-
Table-1, Clause - 5.1 (Chromium)	-
Table-1, Clause - 5.1 (Zinc)	-
Cl. 4 (Freedom from Defects)	-
7 (Dimension - IS 3965)	-
Cl. 5.1, Table 2 (Tensile Strength- IS 1816)	-
Cl. 5.1, Table 2 (Elongation on 50 mm or 5.65√So Gauge Length)	-

-
-

11732

BIS, Central Laboratory (CL)

None

IS 158 (2015)

Ready mixed paint, brushing, bituminous, black, acid, alkali and heat resisting - Specification (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 4.3, Table 1, S.no.xv) (Flash point ,)	-
4.1 (Composition)	-
4.2.1 (Lead Restriction)	-
Cl 4.3, Table 1, S.no. i) (Drying time, Hard dry)	-
Cl 4.3, Table 1, S.no. ii) (Consistency)	-
Cl 4.3, Table 1, S.no. iii) (Finish)	-
Cl 4.3, Table 1, S.no. iv) (Wet opacity)	-
Cl 4.3, Table 1, S.no. v) (Colour)	-
Cl 4.3, Table 1, S.no. vi) ( Mass)	-
Cl 4.3, Table 1, S.no.xvi) (Keeping properties)	-
Cl 4.3, Table 1, S.no.viii) (Flexibility and adhesion)	-
Cl 4.3, Table 1, S.no. ix) (Stripping test )	-
Cl 4.3, Table 1, S.no. x) (Protection against corrosion under conditions of condensation)	-
Cl 4.3, Table 1, S.no.xi) (Volatile matter, perce)	-
Cl 4.3, Table 1, S.no.xii) (Resistance to acid)	-
Cl 4.3, Table 1, S.no.xiii) (Resistance to alkali)	-
Cl 4.3, Table 1, S.no.xiv) (Resistance to Heat)	-

-
For colour, finish, wet opacity, resistance to acid, alkali and heat approved sample is required. Test facility is not available for mentioned exclusion parameter.; Excluding Water content;

11733

BIS, Central Laboratory (CL)

None

IS 14735 (1999)

Unplasticized Polyvinyl Chloride (UPVC) Injection Moulded Fittings for Soil and Waste Discharge System for Inside and Outside Buildings Including Ventilation and Rain Water System -

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5 (Colour of fittings)	-
7.1,Table 1 (Wall thickness)	-
7.2 ,Table 2&3 (Socket Dimensions)	-
10 (Workmanship)	-
11.1 (Solvent cement type or Rubber ring type)	-
11.2 (Socket and spigot configeration)	-
12.1 (Visual appearance)	-
12.2 (Stress relief test)	-
12.3 (Vicat softening tempewrature)	-
Cl.13, IS 12235 (P-7)-2004, (Resistance to Sulphuric Acid)	-
16.1 (Impact test)	-

-
Complete for mechanical requirements; Excluding Titanium dioxide content, effect on water;

11734

BIS, Northern Regional Laboratory (NRL)

None

IS 2879 (1998)

Mild steel for metal arc welding electrodes - Specification (Third Revision)

- View breakup
Rs.9050/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 8 & 9 (Diameter)	-
Cl 7 (Workmanship)	-
Cl 7 (Workmanship)	-
Cl 7 (Workmanship)	-
6 (Carbon %)	-
6 (Manganese %)	-
6 (Phosphorus %)	-
6 (Sulphur %)	-
6 (Silicon %)	-

-
Excluding Microalloying Elements

11735

BIS, Northern Regional Laboratory (NRL)

None

IS 1079 (2017)

Hot rolled carbon steel sheet, plate and strip - Specification (Seventh Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 8 (UTM)	-
Cl 9 (Press)	-
Cl 13 (Length, Width & Thickness)	-
Cl 12 (Workmanship)	-
6.1 (Carbon %)	-
6.1 (Sulphur %)	-
6.1 (Phosphorus %)	-
6.1 (Manganese %)	-
6.1 (Silicon %)	-
6.1 ( Nitrogen%)	-
6.1 (Carbon %)	-

-
Excluding Microalloying Elements

11736

BIS, Northern Regional Laboratory (NRL)

None

IS 3975 (1999)

Low carbon galvanized steel wires, formed wires and tapes for armouring of cables - Specification (Third Revision)

Rs 2700/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 6.1, Table-1 (Sulphur)	-
Clause 6.1, Table-1 (Phosphorus)	-
9.1 (Galvanizing Requirements )	-
9.2 (Galvanizing Requirements )	-
9.1 (Galvanizing Requirements )	-
9.2 (Galvanizing Requirements )	-
14 (a) (Marking)	-
14 (b) (Marking)	-
14 (c) (Marking)	-
14 (d) (Marking)	-
14 (e) (Marking)	-
14 (f) (Marking)	-
14 (g) (Marking)	-
14.2 (Marking)	-
7 (Dimensions)	-
7 (Dimensions)	-
7 (Dimensions)	-
7 (Dimensions)	-
7 (Dimensions)	-
7 (Dimensions)	-
7 (Dimensions)	-
11 (Freedom from defects)	-
8.1 (Mechanical Properties (as per table 5 of IS 1608))	-
8.1 (Mechanical Properties (as per table 5 of IS 1608))	-
8.2 (Mechanical Properties (as per IS 1717))	-
8.3 (Mechanical Properties (as per IS 1755))	-
8.4 (Mechanical Properties (as per IS 10810(Part- 42)))	-
14 (Marking)	-
14 (a) (Marking)	-
14 (b) (Marking)	-
14 (c) (Marking)	-
14 (d) (Marking)	-
14 (e) (Marking)	-
14 (f) (Marking)	-
14 (g) (Marking)	-
14.2 (Marking)	-
7 (Dimensions)	-
7 (Dimensions)	-
7 (Dimensions)	-
7 (Dimensions)	-
7 (Dimensions)	-
7 (Dimensions)	-
7 (Dimensions)	-
11 (Freedom from defects)	-
8.1 (Mechanical Properties (as per table 5 of IS 1608))	-
8.1 (Mechanical Properties (as per table 5 of IS 1608))	-
8.2 (Mechanical Properties (as per IS 1717))	-
8.3 (Mechanical Properties (as per IS 1755))	-
8.4 (Mechanical Properties (as perIS 10810(Part- 42)))	-

-
"Test facility is complete "

11737

BIS, Central Laboratory (CL)

None

IS 14151 : Part 1 (1999)

Irrigation equipment - Sprinkler pipes - Specification: Part 1 polyethylene pipes (First Revision)

Rs.17350/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.3 (Tensile Test)	-
7.2 (Reversion Test)	-
6.1 (VISUAL APPEARANCE)	-
5.1 table -1 (DIMENSIONS OF PIPES)	-
4.1.1 (density shall be between 940.4 kg/m’ and 958.4 kg/m3 (both inclusive) when determined at 27°C according to procedure prescribed in Annex A of IS 7328. The value of the density shall also not differ from the nominal value by more than 3 kg/m2 as per 5.2.1.1 of IS 7328.)	-
Cl. 4.2 , IS 2530-1963, Cl. 10 (Cabon Black Content)	-
4.3 (Anti-oxidant)	-

-
-

11738

BIS, Central Laboratory (CL)

None

IS 281 (2009)

Mild steel sliding door bolts for use with padlocks - Specification (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 (SIZES)	-
6 (DIMENSIONS AND TOLERANCES-A)	-
6-Table 1 (DIMENSIONS AND TOLERANCES-A)	-
6-Table 1 (DIMENSIONS AND TOLERANCES-B)	-
6-Table 1 (DIMENSIONS AND TOLERANCES-C)	-
6-Table 1 (DIMENSIONS AND TOLERANCES-D)	-
6-Table 1 (DIMENSIONS AND TOLERANCES-E)	-
6-Table 1 (DIMENSIONS AND TOLERANCES-F)	-
6-Table 1 (DIMENSIONS AND TOLERANCES-G)	-
6-Table 1 (DIMENSIONS AND TOLERANCES-H)	-
6-Table 1 (DIMENSIONS AND TOLERANCES-J)	-
6-Table 1 (DIMENSIONS AND TOLERANCES-T)	-
6-Table 1 (DIMENSIONS AND TOLERANCES-DIMENSIONS AND TOLERANCES-No. of Screw on Staple or Clip to accommodate Wood Screw N0 (IS 451))	-
6-Table 1 (DIMENSIONS AND TOLERANCES-No. of Rivets on bolts plates)	-
6-Table 1 (DIMENSIONS AND TOLERANCES-No. of Rivets on Socket)	-
6-Table 1 (DIMENSIONS AND TOLERANCES-No. of Screw holes on bolt)	-
6-Table 1 (DIMENSIONS AND TOLERANCES-No. of Screw holes on Socket)	-
6-Table 1 (DIMENSIONS AND TOLERANCES-No. of Screw holes on Staple)	-
6-Table 1 (DIMENSIONS AND TOLERANCES-no. of 8m Sqire Holes for carriage bolts for plate and sockets)	-
6-Table 1 (DIMENSIONS AND TOLERANCES-no. of 8m Sqire Holes for carriage bolts for Staple)	-
7.1 (MANUFACTURE-General)	-
7.2 (MANUFACTURE-Sliding Door Bolts, Plate Type)	-
7.3 (MANUFACTURE-Sliding Bolts, Clip or Bolt Type)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm;

11739

BIS, Central Laboratory (CL)

None

IS 278 (2009)

Galvanized steel barbed wire for fencing - Specification (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5 Table-1 (Sizes Diameter of Line wire)	-
5 Table-1 (Sizes Diamater of Point wire)	-
5 Table-1 (Sizes Mass of Completed barbed wire)	-
5 Table-1 (Sizes Distance between two barbs)	-
5 Table-1 (Sizes No. of Lays between the two consequtive barbs)	-
7.1 (Manufacture)	-
7.2 (Manufacture)	-
9.1 (Freedom from defects)	-
12.1 (Tensile Strength)	-
12.1 (Breaking load)	-
12.2.1 (Mass of zinc coating (line wire))	-
12.2.2 (Mass of zinc coating (point wire))	-
12.2 (Uniformity of zinc coating)	-
12.3 (Ductility)	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M) (Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M) (Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M) (Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M) (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 6 . Table 1 of IS 7887 (Grade : 1,2,3,4,4M,6,6M,7,7M,8,8M,9,10,10M) (Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-

-
Grade of the material and type of killing as per IS 7887 may please be declared.;

11740

BIS, Northern Regional Laboratory (NRL)

None

IS 10748 (2004)

Hot - Rolled steel strip for welded tubes and pipes - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 8 & Table 3 (UTM)	-
Cl 9 (Press)	-
Cl 12 & 13 (Length, Width & Thickness)	-
Cl 11 (Workmanship)	-
7.1 (Carbon %)	-
7.1 (Manganese %)	-
7.1 (Phosphorus %)	-
7.1 (Sulphur %)	-
7.1 (Silicon %)	-
7.1 ( Nitrogen%)	-
7.1 (CE)	-
8.0 (1) (Tensile Strength-IS:1608(P1))	-
8.0 (2) (Yield Strength-IS:1608(P1))	-
8.0 (3) (Elongation on 5.65 SoA GL-IS:1608(P1))	-
7.0 (7) (Micro Alloying elements - IS:8811)	-

-
-

11741

BIS, Central Laboratory (CL)

None

IS 10124 : Part 2 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 2 specific requirements for sockets (Second Revision)

Rs.1800/ View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2.1, Table-1, Fig-1 (Minimum wall thickness for working pressure)	-
Clause 3.2.2, and Fig. 2. (Minimum wall thickness for working pressure)	-
3.2.2, and Fig. 2 (Dimensions of Socket for Elastomeric Sealing Ring Joint)	-

-
Excluding Test facility not available for Cl 6.2 Short Term Hydraulic Test, Cl 5.1.3 Out of Roundness;

11742

BIS, Northern Regional Laboratory (NRL)

None

IS 7181 (1986)

Specification for horizontally cast iron double flanged pipes for water, gas and sewage (First Revision)

Rs.6600/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 (Tensile Test)	-
6.1 (Hydrostatic Test)	-
7.1 (Sizes and Mass)	-
7.2 (Sizes and Mass)	-
7.3 (Sizes and Mass)	-
7.4 (Sizes and Mass Dimensions of Flange)	-
8.5 (Permissible Deviation from a Straight Line)	-
9 (Coating)	-

-
Excluding Microalloying Elements

11743

BIS, Northern Regional Laboratory (NRL)

None

IS 1726 (1991)

Cast iron manhole covers and frames - Specification (Third Revision)

Rs 3225.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.2 and Fig.1 (Key Holes and Keys)	-
5.2 and Fig.2 (Key Holes and Keys )	-
6 and Table 1 (PERFORMANCE REQUIREMENTS - Clear opening of frame O X O1)	-
6 and Table 1 (PERFORMANCE REQUIREMENTS - fd)	-
6 and Table 1 (PERFORMANCE REQUIREMENTS - S)	-
7 and Table 2 and Fig.3 to 9 (DIMENSIONS OF MANHOLE COVERS AND FRAMES - O)	-
7 and Table 2 and Fig.3 to 9 (DIMENSIONS OF MANHOLE COVERS AND FRAMES - O1)	-
7 and Table 2 and Fig.3 to 9 (DIMENSIONS OF MANHOLE COVERS AND FRAMES - F)	-
7 and Table 2 and Fig.3 to 9 (DIMENSIONS OF MANHOLE COVERS AND FRAMES - F1)	-
7 and Table 2 and Fig.3 to 9 (DIMENSIONS OF MANHOLE COVERS AND FRAMES - f)	-
7 and Table 2 and Fig.3 to 9 (DIMENSIONS OF MANHOLE COVERS AND FRAMES - f1)	-
7 and Table 2 and Fig.3 to 9 (DIMENSIONS OF MANHOLE COVERS AND FRAMES - Fd)	-
7 and Table 2 and Fig.3 to 9 (DIMENSIONS OF MANHOLE COVERS AND FRAMES - fd)	-
7 and Table 2 and Fig.3 to 9 (DIMENSIONS OF MANHOLE COVERS AND FRAMES - S)	-
7 and Table 2 and Fig.3 to 9 (DIMENSIONS OF MANHOLE COVERS AND FRAMES - t)	-
7 and Table 2 and Fig.3 to 9 (DIMENSIONS OF MANHOLE COVERS AND FRAMES - t1)	-
7 and Table 2 and Fig.3 to 9 (DIMENSIONS OF MANHOLE COVERS AND FRAMES - C)	-
7 and Table 2 and Fig.3 to 9 (DIMENSIONS OF MANHOLE COVERS AND FRAMES - C1)	-
7 and Table 2 and Fig.3 to 9 (DIMENSIONS OF MANHOLE COVERS AND FRAMES - T)	-
7 and Table 2 and Fig.3 to 9 (DIMENSIONS OF MANHOLE COVERS AND FRAMES - T1)	-
7 and Table 2 and Fig.3 to 9 (DIMENSIONS OF MANHOLE COVERS AND FRAMES - Clearence (C1))	-
8 (COATING - At 63˚C)	-
8 (COATING - At 0˚C)	-
8 (COATING - At 63˚C)	-
3 (GRADES )	-
3 (TYPES)	-
5.1.1 (Covers and Frames)	-
5.1.2 (Covers and Frames)	-
5.2 (Key Holes and Keys)	-

-
Except Load test, Coating test, Facility for chemical testing is not available

11744

BIS, Central Laboratory (CL)

None

IS 10124 : Part 1 (2009)

Fabricated PVC-U Fittings for Potable Water Supplies - Specification Part 1 General Requirements (Second Revision)

Rs 1500/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 Table-1 Fig.1 (Dimension of Socket length)	-
5.2 Table-2 Fig.2 (Dimensions of socket for elastomeric sealing ring)	-

-
Excluding Test facility not available for Cl 6.2 Short Term Hydraulic Test, Cl 5.1.3 Out of Roundness;

11745

BIS, Central Laboratory (CL)

None

IS 276 (2000)

Austenitic - Manganese steel castings - Specification (First Revision)

- View breakup
Rs 7160/- excluding optional test For low alloys: Rs 1060/- per element

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
8.1,8.3, Table 1 (C)	-
8.1,8.3, Table 1 (Si)	-
8.1,8.3, Table 1 (Mn)	-
8.1,8.3, Table 1 (p)	-
8.1,8.3, Table 1 (S)	-
8.1,8.3, Table 1 (Cr)	-
8.1,8.3, Table 1 (Mo)	-
8.1,8.3, Table 1 (Ni)	-

-
-

11746

BIS, Central Laboratory (CL)

None

IS 1656 (2007)

Milk - Cereal based complementary foods - Specification (Fourth Revision)

Rs.23700/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.7.1 (Bacterial count)	-
5.7.2 (Coliform count)	-
5.7.3 (Escherichia coli)	-
5.7.4 (Staphylococcus aureus)	-
5.7.5 (Salmonella and shigella)	-
5.7.6 (Yeast and mould count)	-
4' 5.1 to 5.4 (Description)	-
5.8 (Moisture)	-
5.8 (Total protein)	-
5.8 (Fat)	-
5.8 (total Carbohydrates)	-
5.8 (Total Ash)	-
5.8 (Acid insoluble ash)	-
5.8 (Iron)	-
5.8 (Crude Fibre(on dry basis))	-
5.8 (Zinc)	-
5.8 (Copper)	-
5.8 (Heavy metals, Lead)	-
5.8 (Arsenic)	-
5.8 (Tin)	-
5.8 (Cadmium)	-

-
500 gm x 3 As per IS 1656 (2022); Excluding Vitamin A, Vitamin C, Iron,Vitamin D,Thiamine,Riboflavin, Niacin,Dietary Folate equivalent , Zinc,Lead,Copper,Arsenic,Tin, Cadmium,Melamine;

11747

Conformity Testing Labs Pvt. Ltd. Unit 2 (A33)

8139626

IS 15111 : Part 2 (2002)

Self ballasted lamps for general lighting services: Part 2 performance requirements

150000 View breakup
Rs. 1,50,000/- (10% discount to BIS) • Self Ballasted Lamps for General Lighting Services - Performance

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(DIMENSIONS)	-	5000	10% discount offered to BIS
8.1(STARTING AND RUN-UP)	-	5000	10% discount offered to BIS
8.2(STARTING AND RUN-UP)	-	5000	10% discount offered to BIS
9(Lamp Wattage)	-	10000	10% discount offered to BIS
10(Luminous Flux)	-	20000	10% discount offered to BIS
11(Colour)	-	20000	10% discount offered to BIS
12(LUMEN MAINTENANCE)	-	75000	10% discount offered to BIS
13.1(Life)	-	40000	10% discount offered to BIS
13.2(Life)	-	35000	10% discount offered to BIS
14(Harmonics)	-	10000	10% discount offered to BIS
15(Lamp Efficacy)	-	20000	10% discount offered to BIS
16(Power factor)	-	20000	10% discount offered to BIS
18.1(Marking)	-	5000	10% discount offered to BIS
18.2(BIS Cirtification Marking)	-	5000	10% discount offered to BIS

05 Apr, 2027

-
Radiated & conducted Emission (Cl.4.6)

11748

Conformity Testing Labs Pvt. Ltd. Unit 2 (A33)

8139626

IS 15111 : PART 1 AND PART 2 (2002)

Self ballasted lamps for general lighting services: Part 1 safety requirements

60000 View breakup
(10% discount to BIS) • Self Ballasted Lamps for General Lighting Services - Safety

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Marking)	-	5000	10% Discount for BIS
6.2(Marking)	-	5000	10% Discount for BIS
6.3(Marking)	-	5000	10% Discount for BIS
6.4(BIS Certification Marking)	-	1000	10% Discount for BIS
7(Interchangeability )	-	10000	10% Discount for BIS
8(Protection against electric shock)	-	10000	10% Discount for BIS
9.1(INSULATION RESISTANCE AND ELECTRIC STRENGTH After HUMIDIT’Y TREATMENT)	-	5000	10% Discount for BIS
9.2(Insulation Resistance)	-	5000	10% Discount for BIS
9.2(The insulation resistance of B 22 caps between shell and contact shall be not less than 5 MΩ When measure with a 500 voltage DC.)	-	5000	10% Discount for BIS
9.3(Electric Strength)	-	5000	10% Discount for BIS
10(Mechanical strength test )	-	5000	10% Discount for BIS
11(Cap Temperature rise test )	-	15000	10% Discount for BIS
12(Resistance to heat)	-	5000	10% Discount for BIS
13(Resistance to Flame and Ignition)	-	5000	10% Discount for BIS
14(Fault Conditions)	-	10000	10% Discount for BIS

05 Apr, 2027

-
Mercury content (Cl.15)

11749

BIS, Central Laboratory (CL)

None

IS 210 (2009)

Grey iron castings - Specification (First Revision)

Rs.2700.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6 (Chemical Composition(chemical composition shall be as agreed to between the purchaser and the manufacturer.))	-
7.1 (WORKMANSHIP AND FINISH)	-
10.1 (FREEDOM FROM DEFECTS)	-
10.2 (FREEDOM FROM DEFECTS)	-
13 (SIZE OF TEST BARS-Diameter)	-
13 (SIZE OF TEST BARS-Length)	-
15, Table 3 (TENSIL.E TEST- IS 1608 Part1 )	-
16, Table 3 (Hardness Test)	-
17,Annex B (TRANSVERSE TEST)	-

-
Since the composition of cast iron shall be left to the discretion ofthe manufacturer , as such element to be tested with specified requirement and tolerances if any may please be declared with method of testing. Sample Size 5 pcs of 5x5 cm having dia> 3mm and thickness > 0.8 mm.; Excluding -; Microstracture,Frequency of test,Tensile test(preparing of sample Above 28),Transverse test,Hydrostatic test

11750

Conformity Testing Labs Pvt. Ltd. Unit 2 (A33)

8139626

IS 4250 (1980)

Specification for domestic electric food - Mixers (Liquidizers And Grinders) (First Revision)

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1(Marking- IS 302-1)	-	1000	10% Discount for BIS
8( Protection Against Electric Shock, IS 302-1)	-	5000	10% Discount for BIS
7.2(Marking)	-	1000	10% Discount for BIS
7.4(Marking)	-	1000	10% Discount for BIS
7.5(Marking)	-	1000	10% Discount for BIS
7.6(Marking)	-	1000	10% Discount for BIS
10(Power Input and Current, IS 302-1)	-	5000	10% Discount for BIS
9(Starting, IS 302-1)	-	5000	10% Discount for BIS
11(Heating, IS 302-1)	-	10000	10% Discount for BIS
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	5000	10% Discount for BIS
15.1(Moisture Resistance, IS 302-1)	-	10000	10% Discount for BIS
15.2(Moisture Resistance-Spillage test)	-	10000	10% Discount for BIS
15(Moisture Resistance, IS 302-1)	-	10000	10% Discount for BIS
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	10000	10% Discount for BIS
19(Abnormal Operation, IS 302-1)	-	10000	10% Discount for BIS
20(Stability & Mechanical Hazards, IS 302-1)	-	5000	10% Discount for BIS
21(Mechanical Strength, IS 302-1)	-	5000	10% Discount for BIS
22.1(Construction, IS 302-1)	-	1000	10% Discount for BIS
22.2(Construction)	-	1000	10% Discount for BIS
22.3(Construction)	-	1000	10% Discount for BIS
22.4(Construction)	-	1000	10% Discount for BIS
22.5(Construction)	-	1000	10% Discount for BIS
22.6(Construction)	-	1000	10% Discount for BIS
22.8(Construction)	-	1000	10% Discount for BIS
22.9(Construction)	-	1000	10% Discount for BIS
23(Internal Wiring, IS 302-1)	-	5000	10% Discount for BIS
24.1(Components, IS 302-1)	-	1000	10% Discount for BIS
24.2(Components)	-	1000	10% Discount for BIS
24.4(Components)	-	1000	10% Discount for BIS
24.5(Components)	-	2000	10% Discount for BIS
24.6(Components)	-	1000	10% Discount for BIS
24.7(Components)	-	1000	10% Discount for BIS
24.8(Components)	-	1000	10% Discount for BIS
24.9(Components)	-	1000	10% Discount for BIS
25(Supply Connection and External Flexible Cords, IS 302-1)	-	10000	10% Discount for BIS
26(Terminals for External Conductors, IS 302-1)	-	10000	10% Discount for BIS
27(Provision for Earthing, IS 302-1)	-	5000	10% Discount for BIS
28(Screws & Connections, IS 302-1)	-	10000	10% Discount for BIS
29(Clearances and Distances through Insulation, IS 302-1)	-	10000	10% Discount for BIS
30(Resistance to Heat, Fire, Tracking, IS 302-1)	-	10000	10% Discount for BIS
31(Resistance of Rusting, IS 302-1)	-	10000	10% Discount for BIS
34.2(Operational tests- Grinding coffee (for machines which have a dry grinding arrangement))	-	5000	10% Discount for BIS
34.3(Whisking egg whites )	-	5000	10% Discount for BIS
34.4(IDLI batter-Grinding of black gram)	-	5000	10% Discount for BIS
34.5.1 (a)(Operational test for juicers )	-	5000	10% Discount for BIS
34.5.1 (b)(Operational test for juicers )	-	5000	10% Discount for BIS
34.5.2(Operational test for juicers )	-	5000	10% Discount for BIS
35(Temperature withstand test for bowl)	-	5000	10% Discount for BIS
36(Test for controls )	-	5000	10% Discount for BIS
37(Strength of Assembly )	-	5000	10% Discount for BIS

05 Apr, 2027

-
-

11751

BIS, Northern Regional Laboratory (NRL)

None

IS 4454 : Part 4 (2001)

Steel wires for mechanical springs: Part 4 stainless steel wire (Second Revision)

X07Cr18Ni9, X04Cr19Ni9, X04Cr17Ni12Mo2

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Table 1. Cl.1.1,1.2,7.1 & 7.2 (Carbon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
Table 1. Cl.1.1,1.2,7.1 & 7.2 (Silicon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
Table 1. Cl.1.1,1.2,7.1 & 7.2 (Manganese- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
Table 1. Cl.1.1,1.2,7.1 & 7.2 (Suphur- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
Table 1. Cl.1.1,1.2,7.1 & 7.2 (Phosphorous- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
Table 1. Cl.1.1,1.2,7.1 & 7.2 (Silicon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
Table 1. Cl.1.1,1.2,7.1 & 7.2 (Manganese- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
Table 1. Cl.1.1,1.2,7.1 & 7.2 (Phosphorous- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-

-
Excluding Microalloying Elements, Reduction in area

11752

Conformity Testing Labs Pvt. Ltd. Unit 2 (A33)

8139626

IS 8448 (1989)

Automatic line voltage correctors (Step Type) for domestic use - Specification (First Revision)

100000 View breakup
10% discount to BIS

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.2(TESTS : Leakage current )	-	5000	10% DISCOUNT OFFERED TO BIS SAMPLES
12.1(TESTS : Stability test for relay operation)	-	5000	10% discount to BIS
7.7(TESTS : Creepage distances )	-	5000	10% discount to BIS
7.7(TESTS : clearances )	-	5000	10% discount to BIS
12.5(TESTS : High voltage)	-	10000	10% discount to BIS
12.4(TESTS : Insulation resistance)	-	10000	10% discount to BIS
7.4(TESTS : Mechanical strength )	-	5000	10% discount to BIS
12.6(TESTS : No-load current)	-	5000	10% discount to BIS
7.5(TESTS : Provision for earthing )	-	5000	10% discount to BIS
6.1(CONSTRUCTION)	-	5000	10% discount to BIS
6.2(CONSTRUCTION)	-	5000	10% discount to BIS
6.3(CONSTRUCTION)	-	5000	10% discount to BIS
6.4(CONSTRUCTION)	-	5000	10% discount to BIS
6.5(CONSTRUCTION)	-	5000	10% discount to BIS
6.6(CONSTRUCTION)	-	5000	10% discount to BIS
6.7(CONSTRUCTION)	-	5000	10% discount to BIS
12.9(TESTS : Damp heat )	-	30000	10% discount to BIS
12.8(TESTS : Induced voltage )	-	10000	10% discount to BIS
12.3(TESTS : Output voltage )	-	10000	10% discount to BIS
12.2(TESTS : Physical examination)	-	5000	10% discount to BIS
12.7.1( Temperature-rise : Measurment of Temperature of colling Air)	-	10000	10% discount to BIS
12.7.2(Temperature-rise : Determination of Winding Temperature )	-	10000	10% discount to BIS
12.7.3(Temperature-rise : Duration of Test of Temperature Rise )	-	10000	10% discount to BIS
12.7.4(Temperature-rise : Leading)	-	10000	10% discount to BIS
12.7(Temperature-rise : Temperature Correction for Cooling of Transformer after Shut Down )	-	10000	10% discount to BIS
7.3(TESTS : Stability )	-	5000	10% discount to BIS
7.6(TESTS : Screws and connections )	-	5000	10% discount to BIS
12.11(TESTS : Test for continuous operation )	-	20000	10% discount to BIS
7.1(TESTS : Protection against electric shock)	-	5000	10% discount to BIS
11.1( MARKING : Rating Plate )	-	5000	10% discount to BIS
11.1( MARKING : Manufacturer’s name and country of manufacture)	-	5000	10% discount to BIS
11.1( MARKING : Manufacturer’s serial number land type number)	-	5000	10% discount to BIS
11.1( MARKING : Rated input voltage range)	-	5000	10% discount to BIS
11.1( MARKING :Rated output voltage)	-	5000	10% discount to BIS
11.1( MARKING : Rated frequency )	-	5000	10% discount to BIS
11.1( MARKING : Rated output current)	-	5000	10% discount to BIS
11.1( MARKING : Rated kVA)	-	5000	10% discount to BIS
11.1( MARKING : Class of insulation.)	-	5000	10% discount to BIS

05 Apr, 2027

-
-

11753

BIS, Eastern Regional Laboratory (ERL)

None

IS 191 (2007)

Copper - Specification (Fourth Revision)

All

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
8.1 (FREEDOM FROM DEFECTS)	-
9.1- Table 5 (Mass Resistivity- IS 3635)	-
5.2 (Billets)	-
5.4-Table 3 (For Billets) (Mass)	-
5.2-Table 3 (For Billets) (Length)	-
7.1 - Table 4 (Copper (any Silver present to be counted as copper)-IS440)	-

-
Chem-Only Cu purity test can be carried out, Complete Test Facilities for Electrical Test

11754

BIS, Central Laboratory (CL)

None

IS 208 (1996)

Door Handles - Specification ( Sixth Revision )

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.2 -Table 1- i (Ref. Cl 7.1 -Table 3 Grade 0 of IS 1079 : 2017) (Chemical composition - Carbon - IS 228)	-
4.2 -Table 1- iii (Ref. Cl 3.1, Table 1 Grade LCB-2 of IS 292 : 1983) (Chemical composition - Copper plus incidental nickel - IS 3685:1966)	-
4.2 -Table 1- iv (Ref. Cl 5.1, Table 1 Grade 5230 or 4600 of IS 617 : 1994) (Chemical composition - Copper - IS 504:1963, IS 7658:1975, IS 11035:1984)	-
4.2 -Table 1- v (Ref. Cl 6, Table 1 Grade 19000 of IS 737 : 2008) (Chemical composition - Aluminium - IS 504:1963)	-
4.2 -Table 1- vi (Ref. Cl 5.1, Table 1 Grade 63400 or 65032 of IS 733 : 1983) (Chemical composition - Aluminium - IS 504:1963)	-
4.2 -Table 1- vii (Ref. Cl 6.1 of IS 210 : 2009) (Chemical composition - Sulphur and/or Phosphorous)	-
4.2 -Table 1- viii (Ref. Cl 4.1, Table 1 of IS 742 : 1981) (Chemical composition - Aluminium- IS 2600:1964)	-
4.2 -Table 1- viii (Ref. Cl 4.1, Table 1 of IS 742 : 1981) (Chemical composition - Impurities-Nickel- IS 2600:1964)	-
3 (TYPES-Doors handle shall be of the following types according to the materials used:)	-
5.1 (MANUFACTURE- General)	-
6.1 Table2A & 2B and Fig 1,2,3,4 (DIMENSIONS - Size (A,B,C,D,E,F,G,H,I))	-
6.1 Table2A & 2B and Fig 1,2,3,4 (DIMENSIONS - Size 1. No. in each Lug 2. No. in a plate when a continious plate is used 3. Size Designation of Counter-sunk Head Wood Screws (as per IS 6760: 1972))	-

-
Test facility is available for material test only as per Table 1. Sample dia > 3mm or thickness > 0.8 mm can only be tested, Sample size 5 pcs 5x5 cm; Excluding All except Coating Test;

11755

BIS, Northern Regional Laboratory (NRL)

None

IS 4923 (2017)

Hollow steel sections for structural use - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.7.1 (Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl.7.1 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl.7.1 (Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl.7.1 (Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl.7.1 (Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl.7.1 (Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl.7.1 (Carbon Equivalent-IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl.9.1, Table 1 (Dimensions and Properties of Hollow Sections (Depth))	-
Cl.9.1, Table 1 (Dimensions and Properties of Hollow Sections (Width))	-
Cl.9.1, Table 1 (Dimensions and Properties of Hollow Sections(Thickness))	-
Cl.9.1, Table 1 (Dimensions and Properties of Hollow Sections (Weigth))	-
Cl. 10.1, 14.1, 18.1 (Straightness)	-
Cl. 10.4, Fig 2 (Concavity, X1)	-
Cl. 10.4, Fig 2 (Convexity, X2)	-
Cl. 10.5, Fig 3 (Squareness of side)	-
Cl. 10.6, Fig 4 (External Corner Radius)	-
Cl. 10.7, Fig 5 (Total twist, V)	-
Cl. 15.2, Table 3 (Tensile Strength- IS 1608)	-
Cl. 15.2, Table 3 (Yield Strength- IS 1608)	-
Cl. 15.2, Table 3 (Elongation- IS 1608)	-
Cl. 14.1 (Exact Length)	-
Cl. 14.1 (Random Length)	-
18.1 (Height of the internal weld fin - IS 4923)	-
13 (Marking)	-
18.1 (Height of the internal weld fin - IS 4923)	-
13 (Marking)	-

-
Excluding Microalloying Elements

11756

BIS, Central Laboratory (CL)

None

IS 1166 (1986)

Specification for condensed milk, partly skimmed and skimmed condensed milk (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.5.1.10.1 (Salmonella IS 5887 Part 3)	-
Cl.5.1.10.1 (Shigella IS 5887 Part 7)	-
Cl.5.1.10.2 (Coliform Count IS 5401 Part 1)	-
Cl.5.1.10.3 (Yeast and Mould Count IS 5403)	-
Cl.5.1.10.4 (Coagulase positive Staphylococcus aureus IS 5887 Part 2)	-
Cl.5.1.10.5 (Escherichia coli IS 5887 Part 1)	-
Table 1 (i) (Apendix B) (Total milk solids -Condensed Milk)	-
Table 1 (ii) (IS : 11762- 1986) (Fat -Condensed Milk)	-
Table 1 (iii) (Apendix C) (Sucrose -Condensed Milk)	-
Table 1 (vi) (Apendix D) (Titratable acidity (as lactic acid) -Condensed Milk)	-

-
500 gm x 3

11757

BIS, Eastern Regional Laboratory (ERL)

None

IS 1566 (1982)

Specification for hard - Drawn steel wire fabric for concrete reinforcement (Second Revision)

all grades

Rs 300/- + mat test as per IS:432(Pt 2) View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Sulphur-Relevant Parts of IS 228)	-
4.1 (Phosphorous-Relevant Parts of IS 228)	-
4.1 (Nitrogen-Relevant Parts of IS 228)	-
6 (DIMENSIONS)	-
7 (SIZES OF SHEETS ‘OR ROLLS)	-
8 (MASS)	-
11.2 (Tensile Test)	-
11.3 (Reverse Bend Test)	-
9.2 (Tolerance on Size of Mesh)	-
9.3 (Tolerance on Size of Sheet)	-
9.4 (Tolerance on Mass of Fabric)	-
10 (MECHANICAL PROPERTIES)	-

-
Chem- Except Microalloys & Al tests.

11758

BIS, Eastern Regional Laboratory (ERL)

None

IS 12776 (2002)

Galvanized strand for earthing - Specification (First Revision)

All sizes/grades (pl see remarks)

Rs.3470 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.2 (Freedom From Defects (IS 12776))	-
5.3 (Joints in wires (IS 12776))	-
6- Annex-A, Sl-2 (Size of the wire (IS 12776))	-
6- Annex-A, Sl-8 (Lay (IS 12776))	-
8.2-Annex-A,Sl-6 (Elongation of wire, IS 10810(Part-37))	-
8.2-Annex-A,Sl-3 (Tensile Strength of wire IS 10810(Part-37))	-
8.3-Annex-A,Sl-12 (Resistance at 200 C (IS 12776))	-
8.4 (Wrapping Test (IS 12776))	-
8.5-Annex-A-Sl-7a (Amount of zinc Coating (IS 6745))	-
8.5-Annex-A-Sl-7b (Uniformity of Coating (IS 2633))	-
8.5-Annex-A-Sl-4 (Torsion Test IS 10810(Part-37))	-
4.1 (Carbon- IS 228(Part 1))	-
4.1 (Sulphur- IS 228(Part 9))	-
4.1 (Phosphorous- IS 228(Part 3))	-
4.1 (Manganese- IS 228(Part 2))	-
4.1 (Silicon- IS 228(Part 8))	-
6- Annex-A, Sl-8 (Lay Length)	-

-
Except Breaking Load of Complete wire. "Declarations Required: Size & Tensile Grade".5 mtr sample (before stranding) to be provided additionally.

11759

BIS, Central Laboratory (CL)

None

IS 205 (1992)

Non - Ferrous metal butt specification (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1- Table 2,3,4,5 & Fig-1 & 2 (Dimensions- Type of Hinge 1.Length 2.Breadth 3.Butt Dia 4.Pin Dia 5.Thickness of Flap)	-
5.1- Table 2,3,4,5 & Fig-1 & 2 (Dimensions- 1. Holes for Screw Desination 2. No. of screw Holes)	-
6.1 (Manufacture- General)	-
6.2- Table 2,3,4,5 (Kunckles)	-
6.3 (Screw Holes)	-
6.3.1- Table 2,3,4,5 & Fig-1 & 2 (Screw Holes)	-
6.3.2- Table 2,3,4,5 (Number of Holes)	-
6.3.3 Fig-1 (Position of Holes)	-
4.1 -Table 1-Flap- i (Ref. Cl 5.1, Table 1 Designation 64430 or 65032 of IS 733 : 1983) (Chemical composition - Aluminium - IS 504)	-
4 -Table 1- Flap-ii (Ref. Cl 8.1, Table 1 of IS 319 : 1989) (Chemical composition - Copper - IS 3685:1966)	-
4 -Table 1- Flap-iii (Ref. Cl 3.1, Table 1 Grade LCB-2 of IS 292 : 1983) (Chemical composition - Copper plus incidental nickel - IS 3685:1966)	-
4 -Table 1- Flap-iv (Ref. Cl 6.1 , Table 1 Designation CuZn40 of IS 410 : 1977) (Chemical composition - Copper - IS 3635:1966)	-
4.1 -Table 1-Pin- i (Ref. Cl 5.1, Table 1 Designation 64430 of IS 733 : 1983) (Chemical composition - Aluminium - IS 504)	-
4.1 -Table 1-Pin- ii (Ref. Cl 6.1, Table 1 of IS 7608 : 1987) (Chemical composition - Tin - IS 4027:1967)	-
4.1 -Table 1-Pin- iii (Ref. Cl 6 of IS 280:1978- Cross ref. Cl. 6.1 -Table 1 of IS 7887 : 1992) (Chemical composition - Carbon - IS 228)	-
4.1 -Table 1-Pin- iv (Ref. Cl 4.1 -Table 1 of IS 4413 : 1981) (Chemical composition - Copper - IS 3685:1966)	-
4.1 -Table 1-Pin- v (Ref. Cl 7.1 -Table 1 of IS 6528 : 1995) (Chemical composition - Carbon - IS 228)	-

-
Grade/Designation of material of componenets as per Table 1 may please be declared. Sample dia > 3mm or thickness > 0.8 mm can only be tested;

11760

BIS, Central Laboratory (CL)

None

IS 1165 (2002)

Milk powder - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.5 (Bacterial count)	-
3.5.2 (Coliform count)	-
3.5.3 (Staphylococcus Aureus)	-
3.5.4 (Salmonella)	-
3.5.5 (Shigella)	-
3.1 (Description)	-
3.2 (Flavour and Taste)	-
3.4.5 (Moisture)	-
3.4.5 (Total solids)	-
3.4.5 (Fat)	-
3.4.5 (Insolubility index)	-
3.4.5 (Total ash)	-
3.4.5 (Titratable acidity (lactic acid))	-

-
500 gm x 3

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number