BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

14027 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

11791

BIS, Southern Regional Laboratory (SRL)

None

IS 617 (2024)

Aluminium and Aluminium Alloys Ingots for Remelting and Castings for General Engineering Purposes â Specification (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-6.1, Table-1 (Si)	-
Cl-6.1, Table-1 (Fe)	-
Cl-6.1, Table-1 (Cu)	-
Cl-6.1, Table-1 (Mn)	-
Cl-6.1, Table-1 (Mg)	-
Cl-6.1, Table-1 (Cr)	-
Cl-6.1, Table-1 (Ni)	-
Cl-6.1, Table-1 (Zn)	-
Cl-6.1, Table-1 (Pb)	-
Cl-6.1, Table-1 (Sn)	-
Cl-6.1, Table-1 (Ti)	-
Cl-6.1, Table-1 (Others elements Each)	-
Cl-6.1, Table-1 (Others elements Total)	-
Cl-6.1, Table-1 (Aluminium)	-
Cl-6.2 (The chemical analysis)	-

-
" 300 mm long x 2 Nos. For Chemical test:5 pcs of 50 mm X 50 mm Facility for preparation of test specimen not available".

11792

BIS, Eastern Regional Laboratory (ERL)

None

IS 4432 (1988)

Specification for case hardening steels (First Revision)

For all grades except test mentioned in remarks

Please see remarks. View breakup
Rs 11660/- excluding Grain size, Cleanliness of steel and additional tests For elements other than Table-1: Rs 1004/- per element

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 (Freedom from Defects)	-
7 (Hardness)	-
11 (Dimensional Tolerances)	-
TABLE-1 (Clause-5) ( CARBON)	-
TABLE-1 (Clause-5) (SULPHUR)	-
TABLE-1 (Clause-5) (PHOSPHURS)	-
TABLE-1 (Clause-5) (MANGANESE)	-
TABLE-1 (Clause-5) (SILICON)	-
TABLE-1 (Clause-5) (Chromium)	-
TABLE-1 (Clause-5) (Nickel)	-
TABLE-1 (Clause-5) (Molybdenum)	-
8 (Mechanical testing)	-
8.4 (Impact testing)	-
9 (Grain Size)	-
10 (Inclusion rating)	-

-
Chem- Except Vanadium

11793

BIS, Western Regional Laboratory (WRL)

None

IS 15644 (2006)

Safety of electric toys

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.0 (Marking and instructions)	-
8.0 (Power Input)	-
7.0 (Marking and instructions)	-
11.1 (Moisture resistance)	-
11.2 (Resistant to humidity)	-
12.0 (Electric strength at room temperature)	-
13.0 (Mechanical strength)	-
14.1 (Construction)	-
14.2 (Construction)	-
14.3 (Construction)	-
14.4 (Construction)	-
14.5 (Construction)	-
14.6 (Construction)	-
14.7 (Construction)	-
14.8 (Construction)	-
14.9 (Construction)	-
14.1 (Construction)	-
14.11 (Construction)	-
14.12 (Construction)	-
14.13 (Construction)	-
14.14 (Construction)	-
10.0 (Electrical strength at operating temperature)	-
15.1 (Protection of cords and wires)	-
7.0 (Marking and instructions)	-
16.0 (Components)	-
17 Table-1 (Screws and connections)	-
17 Table-1 (Nominal daimeter of screws made of insulating material)	-
18.0 (Clearance and creepage distance)	-
19.1 (Ball pressure test IEC 60695-10-2)	-
19.2.1 (Glow wire test IEC 60695-2-11)	-
7.0 (Marking and instructions)	-
13.0 (Mechanical strength)	-
7.0 (Marking and instructions)	-

-
The following test facilities for clauses are not available: 1. Component (Clause 16) 2. Clause 14.15 3. Clause 20

11794

BIS, Western Regional Laboratory (WRL)

None

IS 5950 (1984)

Specification for shot firing cables (For Use Other Than In Shafts) (First Revision)

Rs 11030/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Conductor : Material -IS : 8130-2013)	-
4.1 (Insulation : Material -IS : 5831-1984)	-
5.1 (Sheath : materail IS : 5831-1984)	-
6.1 (Conductor : Construction IS : 8130-2013)	-
7.1 (Insulation : Application )	-
7.2 (Thickness of Insulation - average )	-
7.2 (Thickness of Insulation - Min. )	-
7.3 (Colour of Insulation)	-
8.1, 9.1 (c) (Nominal radial thickness of sheath)	-
8.2 (Thickness of Sheath)	-
8.3 (Colour of Sheath)	-
9.1 a) (Annealing test)	-
9.1 b) (Conductor resistance test)	-
9.1 d) i) (Insulation : Tensile strength)	-
9.1 d) i) (Insulation : elongation at break)	-
9.1 d) i) (Sheath : Tensile strength)	-
9.1 d) i) (Sheath : elongation at break)	-
9.1 d) ii) (Ageing in air oven - Insulation : Tensile strength)	-
9.1 d) ii) (Ageing in air oven - Insulation : Tensile strength Variation)	-
9.1 d) ii) (Ageing in air oven - Insulation : elongation at break)	-
9.1 d) ii) (Ageing in air oven - Insulation : elongation variation at break)	-
9.1 d) ii) (Ageing in air oven - Sheath : Tensile strength)	-
9.1 d) ii) (Ageing in air oven - Sheath : Tensile strength variation )	-
9.1 d) ii) (Ageing in air oven - Sheath : elongation at break)	-
9.1 d) ii) (Ageing in air oven - Sheath : elongation variation at break)	-
9.1 d) iii ) (Loss of mass test - insulation )	-
9.1 d) iii ) (Loss of mass test - Sheath )	-
9.1 d) iv ) (Hot deformation - insulation )	-
9.1 d) iv ) (Hot deformation - sheath )	-
9.1 d) v ) (Heat shock - insulation )	-
9.1 d) v ) (Heat shock - Sheath )	-
9.1 d) vi ) (Shrinkage - insulation )	-
9.1 d) vi ) (Shrinkage : Crack observed - insulation )	-
9.1 d) vi ) (Shrinkage - Sheath )	-
9.1 d) vi ) (Shrinkage: Crack observed - Sheath )	-
10.2 (Voltage test )	-
9.1 f) (Insulation resistance test: Volume resistivity )	-
9.1 f) (Insulation resistance test : IR constant)	-
10.3 (Spark Test)	-
10.4 (Flammability Test )	-
11.1 (Manufacturer’s Identification)	-
11.2 (Cable Code)	-
12.1 (packing )	-
12.2 (Marking )	-
12.2.1 (Standard marks )	-

-
-

11795

BIS, Western Regional Laboratory (WRL)

None

IS 11217 (1984)

Specification for ultramarine blue for use in textile industry

Rs. 600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2.1 (Composition)	-
2.2 (Identification)	-

-
-

11796

BIS, Western Regional Laboratory (WRL)

None

IS 10124 : Part 13 (2009)

Fabricated PVC-U Fittings for Potable Water Supplies - Specification Part 13 Specific Requirements for 11Â¼oBends PART 12 SPECIFIC REQUIREMENTS FOR 22 Â½o BENDS

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (General)	-
3.2.2, Table 2 (Dimension of 11 1/4° bends for Elastomeric sealing ring joint)	-
3.2.2, Table 1 (Dimension of 11 1/4° bends)	-
3.2.3 (Socket, Measurement)	-

-
The following test facilities are not available: (1)Effect on water (2) Testing facility above 250 mm for Short Term Hydrostatic test

11797

BIS, Western Regional Laboratory (WRL)

None

IS 10124 : Part 12 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 12 specific requirements for 22½ degree bends (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (General)	-
3.2.2, Table 1 (Dimensions of 22 ½ deg Bends)	-
3.2.2, Table 2 (Dimensions of 22 ½ deg Bend for Elastomeric Sealing Ring Joint)	-
3.2.3 (Socket, measurements)	-

-
The following test facilities are not available: (1)Effect on water (2) Testing facility above 250 mm for Short Term Hydrostatic test

11798

BIS, Western Regional Laboratory (WRL)

None

IS 10124 : Part 11 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 11 specific requirements for 40 degree bends (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (General)	-
3.2.2, Table 1 (Dimensions of 30 deg Bends)	-
3.2.2, Table 2 (Dimensions of 30 deg Bend for Elastomeric Sealing Ring Joint)	-

-
The following test facilities are not available: (1)Effect on water (2) Testing facility above 250 mm for Short Term Hydrostatic test

11799

BIS, Western Regional Laboratory (WRL)

None

IS 10124 : Part 10 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 10 specific requirements for 45 degree bends (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (General)	-
3.2, 3.2.1, Fig 2 (Manufacture)	-
3.2.2, Fig 1, table 1 (Dimensions)	-
3.2.3 (the socket measurement shall comply with IS 10124 (Part 1).)	-
Table 1 (Clause 3.2.2, and Fig. 1) (Dimensions of 45o Bend)	-
Table 2 (Clause 3.2.2, and Fig. 2) (Dimensions of 45° Bend for Elastomeric Sealing Ring Joint)	-

-
The following test facilities are not available: (1)Effect on water (2) Testing facility above 250 mm for Short Term Hydrostatic test

11800

BIS, Western Regional Laboratory (WRL)

None

IS 10124 : Part 9 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 9 specific requirements for 60 degree bends (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (General)	-
3.2, 3.2.1, Fig 2 (Manufacture)	-
3.2.2, Fig 1, table 1 (Dimensions)	-
3.2.3 (the socket measurement shall comply with IS 10124 (Part 1).)	-
Table 1 (Clauses 3.2.2, 3.2.3, and Fig. 1) (Dimensions of 60o Bends)	-
Table 2 (Clause 3.2.2, and Fig. 2) (Dimensions of 60o Bend for Elastomeric Sealing Ring Joint)	-

-
The following test facilities are not available: (1)Effect on water (2) Testing facility above 250 mm for Short Term Hydrostatic test

11801

BIS, Western Regional Laboratory (WRL)

None

IS 10124 : Part 8 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 8 specific requirements for 90 degree bends (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (General)	-
3.2, 3.2.1, Fig 2 (Manufacture)	-
3.2.2, Fig 2, table 2 (Dimensions)	-
3.2.3 (the socket measurement shall comply with IS 10124 (Part 1).)	-
Table 1 (Clause 3.2.2, and Fig. 1) (Dimensions of 90o Bends)	-
Table 2 (Clause 3.2.2, and Fig. 2) (Dimensions of 90o Bend for Elastomeric Sealing Ring Joint)	-

-
The following test facilities are not available: (1)Effect on water (2) Testing facility above 250 mm for Short Term Hydrostatic test

11802

BIS, Western Regional Laboratory (WRL)

None

IS 10124 : Part 7 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 7 specific requirements for threaded adaptors (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (General)	-
3.2 (Materials)	-
3.3, 3.3.1, Fig 1 (Manufacture)	-
3.3.2, table 1, fig 1 (Dimensions)	-
3.3.3 (socket measurement shall comply with IS 10124 (Part 1).)	-
Table 1 (Clauses 3.3.1 and 3.3.2) (Dimensions of Threaded Adaptors)	-

-
The following test facilities are not available: (1)Effect on water (2) Testing facility above 250 mm for Short Term Hydrostatic test

11803

BIS, Western Regional Laboratory (WRL)

None

IS 10124 : Part 6 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 6 specific requirements for flanged tail pieces with metallic flanges (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (General)	-
3.2, 3.2.1, Fig 1 (Manufacture)	-
3.2.2, Fig 2, table 2 (Dimensions)	-
Table 1 (Clause 3.2.2, and Fig. 1) (Dimensions of PVC Flanged Tail Piece with Metallic Flanges)	-
Table 2 (Cl.3.2.2, and Fig.1) (Dimensions of Flanged Tail Piece with Metallic Flange for Elastomeric Sealing Ring Joint)	-

-
The following test facilities are not available: (1)Effect on water (2) Testing facility above 250 mm for Short Term Hydrostatic test

11804

BIS, Western Regional Laboratory (WRL)

None

IS 10124 : Part 5 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 5 specific requirements for equal tees (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (General)	-
3.2, 3.2.1, Fig 1 (Manufacture)	-
3.2.2, Fig 1 (Dimensions)	-
Table 1(Cl.3.2.2, and Fig.1) (Dimensions of Equal Tees)	-

-
The following test facilities are not available: (1)Effect on water (2) Testing facility above 250 mm for Short Term Hydrostatic test

11805

BIS, Western Regional Laboratory (WRL)

None

IS 10124 : Part 4 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 4 specific requirements for caps (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (General)	-
3.2, 3.2.1, Fig 1 (Manufacture)	-
3.2.2, Fig 1 (Dimensions)	-
Table 1(Cl.3.2.2, and Fig.1) (Dimensions of Caps)	-

-
The following test facilities are not available: (1)Effect on water (2) Testing facility above 250 mm for Short Term Hydrostatic test

11806

BIS, Western Regional Laboratory (WRL)

None

IS 10124 : Part 3 (2009)

Fabricated PVC-U Fittings for Potable Water Supplies - Specification Part 3 Specific Requirements for Straight Reducers

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (General)	-
3.2, 3.2.1, Fig 1 (Manufacture)	-
3.2.2, Fig 1 (Dimensions)	-
Table-1 (cl.3.2.2, Fig 1) (Dimensions of Straight Reducers)	-

-
Test facilities are not available for the following: (1)Effect on water (2) Testing facility above 250 mm for Short Term Hydrostatic test

11807

BIS, Western Regional Laboratory (WRL)

None

IS 5158 (1987)

Specification for phthalic anhydride,technical - (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2.1 (Description)	-

-
-

11808

BIS, Western Regional Laboratory (WRL)

None

IS 4199 (2001)

Toilet soap, liquid - Specification (Third Revision)

Rs 2980/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.4.1 (Description)	-

-
Test facility not available for following; 1.SKIN SENSITIZATION TEST ON GUINEA PIGS

11809

BIS, Western Regional Laboratory (WRL)

None

IS 252 (2013)

Caustic soda - Specification (Fourth Revision)

Rs 5100/- (for Lye & Solid) View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3 (Form and Description)	-
Cl. 3.3 and 3.4(Table 1, S. no i) (Sodium carbonate (as Na2CO3), percent by mass)	-
Cl. 3.3 and 3.4(Table 1, S. no ii) (Sodium hydroxide (as NaOH), percent by mass)	-
Cl. 3.3 and 3.4(Table 1, S. no iii) (Chlorides (as Cl– ), percent by mass)	-
Cl. 3.3 and 3.4(Table 1, S. no iv) (Sulphates (as SO4), percent by mass)	-
Cl. 3.3 and 3.4(Table 1, S. no v) (Silicates (as SiO2), percent by mass)	-
Cl. 3.3 and 3.4(Table 1, S. no vi) (Iron (as Fe))	-
Cl. 3.3 and 3.4(Table 1, S. no vii) (Copper)	-
Cl. 3.3 and 3.4(Table 1, S. no viii) (Manganese)	-
Cl. 3.3 and 3.4(Table 1, S. no ix) (Chlorates and per-chlorates)	-
Cl. 3.3 and 3.4(Table 1, S. no x) (Matter insoluble water, percent by mass)	-
Cl. 3.3 and 3.4(Table 1, S. no xii) (Sodium hydroxide)	-

-
Test facility not available for the following: 1. Mercury

11810

BIS, Western Regional Laboratory (WRL)

None

IS 21 (1992)

Wrought aluminium and aluminium alloys for manufacture of utensils specification (Fourth Revision)

Rs.6600/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.2, Table 2 of IS:21 (Designation & Condition 64430, 'W') (Tensile Strength)	-

-
Test facilities are not available for the following: 1. Chemical composition as per Cl. 4.2 2.Tensile Test (Proof Stress ) 3.Bend Test

11811

BIS, Northern Regional Laboratory (NRL)

None

IS 2791 (1992)

Soluble coffee powder - Specification (Third Revision)

4126 View breakup
Rs. 4126/- excluding copper content and pesticide residues

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.4 Table 1 (Moisture content)	-
3.4 Table 1 (Total ash)	-
3.4 Table 1 (Caffeine content)	-
3.1 (Description )	-
3.4 Table 1 (Solubility in boiling)	-
3.4 Table 1 (Solubility in cold water)	-

-
Caffeine content, Cu

11812

ELECTRONICS AND QUALITY DEVELOPMENT CENTRE - EQDC, GANDHINAGAR

7118234

IS 12615 (2018)

Line operated three phase AC motors (IE Code) "Efficiency classes and performance specification" (Third Revision)

Rotating electrical machines

375000 View breakup
Rs.6,825/- From 0.37 to 5.5kW, Rs.8,550/- From 5.5 to 11kW, Rs.12,488/- From 11 to 19kW, Rs.15,413/- From 19 to 22 kW, Rs.16,463/- From 22 to 29.5kW, Rs.17,963/- From 29.5 to 33kW, Rs.18,788/- From 33 to 45kW, Rs.24,338/- From 45 to 75kW, Rs.33,600/- From 75 to 110kW, Rs.1,50,000/- From 110.1 to 200kW, Rs.1,87,500/- From 200.1 to 250kW, Rs.2,25,000/- From 250.1 to 300kW, Rs.3,00,000/- From 300.1 to 350kW, Rs.3,75,000/- From 350.1 to 375kW

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
16.2.1(Dimensions)	-	18500	From 350.1 to 375 kW
11.0(DUTY AND RATING)	-	6500	From 350.1 to 375 kW
8.0(Earthing)	-	6500	From 350.1 to 375 kW
16.2.3(Full Load Test to Determine Efficiency, Power Factor and Slip)	-	62500	From 350.1 to 375 kW
16.1.6(High Voltage Test)	-	23500	From 350.1 to 375 kW
16.1.1(Insulation Resistance Test)	-	23500	From 350.1 to 375 kW
16.1.4(Locked Rotor Readings of Voltage, Current and Power Input at a Suitable Reduced Voltage)	-	57500	From 350.1 to 375 kW
16.2.2(Locked Rotor Test)	-	57500	From 350.1 to 375 kW
16.2.2.1(Locked Rotor Test)	-	57500	From 350.1 to 375 kW
16.2.2.2(Locked Rotor Test)	-	57500	From 350.1 to 375 kW
16.2.2.2.1(Locked Rotor Test)	-	57500	From 350.1 to 375 kW
16.2.2.3(Determination of starting characteristics -locked rotor current)	-	57500	From 350.1 to 375 kW
16.2.2.3.1(Direct proportion method)	-	57500	From 350.1 to 375 kW
Cl. 18.2(Marking and labelling)	-	6500	From 350.1 to 375 kW
15.2(Rating)	-	6500	From 350.1 to 375 kW
15.3.2(Marking)	-	6500	From 350.1 to 375 kW
Cl. 18.1(Marking and labelling)	-	6500	From 350.1 to 375 kW
16.1.2(Measurement of Resistance of Windings of Stator)	-	40000	From 350.1 to 375 kW
16.2.1(Dimensions)	-	18500	From 350.1 to 375 kW
16.2.5(Momentary Overload Test)	-	47500	From 350.1 to 375 kW
16.1.3(No Load Test)	-	40000	From 350.1 to 375 kW
16.1.3(No Load Test)	-	40000	From 350.1 to 375 kW
12.2(Pull up torque)	-	57500	From 350.1 to 375 kW
16.1.5(5 Reduced Voltage Running up Test at no-load (for squirrel cage motor up to 37 kW only))	-	40000	From 350.1 to 375 kW
16.2.4(Temperature Rise Test)	-	127500	From 350.1 to 375 kW
16.2.4(Temperature Rise Test)	-	127500	From 350.1 to 375 kW
9.0(Terminal Marking)	-	6500	From 350.1 to 375 kW
6(Method of cooling)	-	127500	From 350.1 to 375 kW
18.3(Marking)	-	6500	From 350.1 to 375 kW
18.3(BIS Certification Marking )	-	6500	From 350.1 to 375 kW

09 Oct, 2027

-
Capacity: 0.37 kW to 375 kW. Exclusions: Optional tests: Test for vibration severity of motor (Cl.16.3.1), Test for noise levels of motor (Cl.16.3.2), Test for degree of protection by enclosure (Cl.16.3.3), Over speed test (Cl.16.3.4), Temperature rise test at limiting values of voltage and frequency variation (Cl.16.3.5).

11813

BIS, Bengaluru Branch Laboratory (BNBL)

None

IS 2888 (2004)

Toilet soap - Specification (Third Revision)

- View breakup
Rs. 4050/- each for Gr.1 & Gr.2 Rs. 4700/- for Gr. 3

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.5, Table-1 (vii), Grade-1 (Lather)	-
5.5, Table-1 (vii), Grade-2 (Lather)	-
5.5, Table-1 (vii), Grade-1 (Lather)	-
5.5, Table-1 (vi), Grade-1, Grade-2 & Grade-3 (Free carbonated alkali)	-
5.5, Table-1 (v), Grade-1, Grade-2 & Grade-3 (Chloride (as sodium chloride), IS 286)	-
5.5, Table-1 (iv), Grade-2 & Grade-3 (Matter insoluble in alcohol, IS 286)	-
5.5, Table-1 (iii), Grade-1, Gr-2 & Gr-3 (Free caustic alkali, as sodium hydroxide (NaOH), IS 286)	-
5.5, Table-1 (ii), Grade-1, Gr-2 & Gr-3 (Rosin acids, percent by mass of total fatty matter, IS 286 )	-
5.5, Table-1 (iv), Grade-1 (Matter insoluble in alcohol, IS 286)	-
5.5, Table-1 (i), Grade-1 (Total fatty matter, IS 286)	-
5.5, Table-1 (i), Grade-2 (Total fatty matter, IS 286)	-
5.5, Table-1 (i), Grade-3 (Total fatty matter, IS 286)	-
5.3 (Phenolic substances, IS 286)	-

-
-

11814

BIS, Eastern Regional Laboratory (ERL)

None

IS 8510 : Part 1 to 3 (1977)

Specification for tinned steel wire for banding of armatures and rotors

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6 (Sizes and tolerances)	-
7.1.1of Part 1 ,4 of Part 2 (Tensile Strength (for magnetic banding wires))	-
7.1.1of Part 1 ,4 of Part 2 (Proof Stress(for magnetic banding wires))	-
7.1.1of Part 1 ,4 of Part 3 (Tensile Strength (for non magnetic banding wires))	-
7.1.1of Part 1 ,4 of Part 2 (Wrapping Test(for magnetic banding wires))	-
7.1.1of Part 1 ,4 of Part 3 (Proof Stress(for non magnetic banding wires))	-
7.1.1of Part 1 ,4 of Part 3 (Wrapping Test(for non magnetic banding wires))	-
7.3 of Part 1 , 5 of Part 2 (Surface coating (for magnetic banding wires))	-
7.3 of Part 1 , 5 of Part 3 (Surface coating (for non magnetic banding wires))	-
CL 3.1 (Surface coating)	-
CL 3.1 (Carbon)	-
CL 3.1 (Sulphur)	-
CL 3.1 (Phosphorous)	-
CL 3.1 (Manganese)	-
CL 3.1 (Silicon)	-

-
Chem- except coating test (pt-I) and Surface coating (pt-II & III)

11815

BIS, Eastern Regional Laboratory (ERL)

None

IS 1626 : Part 3 (1994)

Asbestos Cement Building types and Pipe Fittings, Gutters and Gutter Fittings and Roofing Fittings - Part 3 : Roofing Fittings

For all shapes

Rs.3300.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 Table-1 (Shapes)	-
6.1 (Physical requirements)	-
5.2 & 5.3.1 (Length)	-
5.2 & 5.3.2 (Thickness)	-
7 (Genaral appearance and finish)	-
5.2 (Dimensions)	-
5.3 (Tolerances)	-
6.2 (Impermeability test according to the Method 1 described in IS 5913 : 1989)	-
10 (Marking)	-
11 (Safety rules sheet)	-
Cl. 5.2 (Cl. 5.2 Outer Thickness)	-
Cl. 5.2 (Cl. 5.2 Inner Thickness)	-
Cl. 5.2 (Cl. 5.2, Outer Length)	-
Cl. 5.2 (Cl. 5.2, Inner Length )	-
7 (General Apperarce and Finish)	-
6.2 (Impermeability , Method 1 of IS 5913)	-
6.1 (Freedom from defects)	-
5.2 & 5.3.2 (Thickness)	-
5.2 & 5.3.1 (Length)	-
5.1,Table 1 (Shape)	-
5.2 (Dimensions)	-
6.1 (Visual Inspection)	-
6.2 (Impermeability Test)	-
7 (General Apperance & Finish)	-

-
Dimensions of various fittings shall be declared

11816

BIS, Eastern Regional Laboratory (ERL)

None

IS 9442 (1980)

Specification for hot-rolled steel plates, sheets and strips for manufacture of agricultural tillage discs

All Grades

Rs 1425/ View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6 (Freedom From Defects)	-
6.2 (Freedom From Defects)	-
9 (Hardness ,IS 1501(p 1))	-
10 (Dimension, Length)	-
10 (Dimension, Width)	-
10 (Dimension, Thickness)	-
7 (Grain Size)	-
8 (Decarburisation)	-
6.3 (Inclusion rating)	-
Clause 5.1 (Carbon)	-
Clause 5.1 (Sulphur)	-
Clause 5.1 (Phosphorous)	-
Clause 5.1 (Manganese)	-
Clause 5.1 (Silicon)	-
Clause 5.1 (Carbon)	-
Clause 5.1 (Sulphur)	-
Clause 5.1 (Phosphorous)	-
Clause 5.1 (Manganese)	-
Clause 5.1 (Silicon)	-

-
except Cl 6.3 THE INCLUSION RATING ( IS : 4163-1967 ) , Cl 7.GRAIN SIZE Cl 8. DECARBURIZATION, Cl 10. DIMENSIONS AND TOLERANCES

11817

BIS, Guwahati Branch Laboratory (GBL)

None

IS 4822 (1981)

Specification for brass cooking utensils (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
cl. 2 (grades)	-
cl. 4, fig. 1, fig. 2, fig. 3, fig. 4, fig. 5, fig. 6 (diameter, D)	-
cl. 4, fig. 1, fig. 2, fig. 3, fig. 4, fig. 5, fig. 6 (thickness of sheet)	-
cl. 4, fig. 1, fig. 2, fig. 3, fig. 4, fig. 5, fig. 6 (max permissible reduction in thickness)	-
cl. 5 (workmanship and finish)	-
cl. 6 (other requirements)	-
cl. 7 (marking)	-
cl. 7.1 (ISI certification marking)	-

-
Disabled.

11818

BIS, Guwahati Branch Laboratory (GBL)

None

IS 11100 (1984)

Specification for sweeping brooms

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
cl. 3.1 (bamboo strips)	-
cl. 4.1, 5.1, fig. 1 (split bamboo strips extending beyond ring)	-
cl. 4.1, 5.1, fig. 1 (split bamboo strips - maximum length)	-
cl. 4.1, 5.1, fig. 1 (split bamboo strips - minimum length)	-
cl. 4.3, fig. 2 (plug length)	-
cl. 4.3, fig. 2 (plug thick end diameter)	-
cl. 4.4, fig. 3 (ring - smaller diameter)	-
cl. 4.4, fig. 3 (ring - larger diameter)	-
cl. 4.4, fig. 3 (ring - overlap length)	-
cl. 4.4, fig. 3 (ring - thickness)	-
cl. 4.5 (manufacture - strips)	-
cl. 5.2 (mass)	-
cl. 6.1 (workmanship and finish)	-
cl. 8.2.1 (major defects)	-
cl. 8.2.1 (major defects)	-
cl. 8.2.1 (major defects)	-
cl. 8.2.1 (major defects)	-
cl. 8.2.1 (major defects)	-
cl. 8.2.2 (minor defects)	-
cl. 8.2.2 (minor defects)	-
cl. 9.1 (marking)	-
cl. 9.2 (marking)	-

-
Disabled.

11819

BIS, Guwahati Branch Laboratory (GBL)

None

IS 1976 (1976)

Specification for rotary paddy weeder, manually - Operated (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
cl. 4.1 (Size - Width)	-
cl. 5.1 (Weeding Roll)	-
cl. 5.1.1 (Tines)	-
cl. 5.1.2 (Axle)	-
cl. 5.1.3 (Bearings)	-
cl. 5.1.4 (Washer)	-
cl. 5.2 (Float (Sleigh))	-
cl. 5.3 (Frame)	-
cl. 5.4 (Arm Piece (Yoke))	-
cl. 5.5 (angle regulator)	-
cl. 5.6 (handle)	-
cl. 6.1 (workmanship and finish)	-
cl. 6.2 (workmanship and finish)	-
cl. 6.3 (workmanship and finish)	-
cl. 6.4 (workmanship and finish)	-
cl. 7.1 (marking)	-
cl. 7.1.1 (marking)	-
cl. 7.1.2 (marking)	-

-
Disabled.

11820

BIS, Eastern Regional Laboratory (ERL)

None

IS 844 : Part 2 (1979)

Specification for screwdrivers: Part 2 dimensions (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.7 (Shape)	-
3.1 (Width across flat of Hexagon)	-
3.1 (L)	-
3.1 (l)	-
3.1 (d min)	-
3.1 ( Dimension, axb)	-

-
Except Cl 8.1 Torque tester

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number