BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15366 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

11851

AADCO TESTING & RESEARCH LABORATORY PVT LTD (F28), GHAZIABAD

8141606

IS 12894 (2002)

Pulverized fuel ash - Lime bricks - Specification

all

6500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(General Requirements)	-	500	-
3.2(General Requirements)	-	500	-
3.3(General Requirements)	-	500	-
3.4(General Requirements)	-	500	-
3.5(General Requirements)	-	500	-
5.1(Dimensions)	-	500	-
5.2(Tolerance)	-	500	-
7.1, Table -1(Average Wet Compressive Strength)	-	2000	-
7.2(Drying Shrinkage)	-	500	-
7.3(Efflorescence Test)	-	500	-
7.4(Water Absorption)	-	500	-
3.1(General Requirements)	-	500	-
3.2(General Requirements)	-	500	-
3.3(General Requirements)	-	500	-
3.4(General Requirements)	-	500	-
3.5(General Requirements)	-	500	-
5.1(Dimensions)	-	500	-
5.2(Tolerance)	-	500	-
7.1, Table -1(Average Wet Compressive Strength)	-	2000	-
7.2(Drying Shrinkage)	-	500	-
7.3(Efflorescence Test)	-	500	-
7.4(Water Absorption)	-	500	-

26 Jul, 2027

-
-

11852

AADCO TESTING & RESEARCH LABORATORY PVT LTD (F28), GHAZIABAD

8141606

IS 2185 : Part 3 (1984)

Concrete Masonry Units Part 3 Autoclaved Cellular Aerated Concrete Blocks

ALL

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(SURFACE TEXTURE AND FINISH)	-	500	-
8(Physical requirments)	-	1000	-
8.2(Physical requirments-Dimensions-Length)	-	500	-
8.2(Physical requirments-Dimensions-Height)	-	500	-
8.2(Physical requirments-Dimensions-Width)	-	500	-
8.3(Physical requirments- Block density)	-	3000	-
8.4(Physical requirments- Compressive strength)	-	3000	-
8.5(Thermal Conductivity)	-	8000	-
8.6( Drying Shrinkage )	-	3000	-
7(SURFACE TEXTURE AND FINISH)	-	-	-
8(Physical requirments)	-	-	-
8.2(Physical requirments-Dimensions-Length)	-	-	-
8.2(Physical requirments-Dimensions-Height)	-	-	-
8.2(Physical requirments-Dimensions-Width)	-	-	-
8.3(Physical requirments- Block density)	-	-	-
8.4(Physical requirments- Compressive strength)	-	-	-
8.5(Thermal Conductivity)	-	-	-
8.6( Drying Shrinkage )	-	-	-

26 Jul, 2027

-
-

11853

AADCO TESTING & RESEARCH LABORATORY PVT LTD (F28), GHAZIABAD

8141606

IS 15658 (2021)

Concrete Paving Blocks - Specification ( First Revision )

ALL GRADE

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 7.1.1 (General Quality)	-	500	-
Clauses 7.1.2 & 9.1.2 (Visual Inspection)	-	500	-
Clause 7.1.3 (Colour and Texture)	-	500	-
Clause 7.2, Table No. 2, SI No. (i) (Width, W)	-	500	-
Clause 7.2, Table No. 2, SI No. (ii) (Length, L)	-	500	-
Clause 7.2, Table No. 2, SI No. (iii) (Thickness, Th)	-	500	-
Clause 7.2, Table No. 2, SI No. (iv) (Aspect Ratio, L/Th)	-	500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Width)	-	500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Depth)	-	500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Thickness of wearing Layer)	-	500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Plan Area (Asp))	-	500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Ratio of wearing face area and Plan area (Asw/Asp))	-	500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (ix)(Deviation from squareness)	-	500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (i) b)(Water absorption (Average of three test specimens))	-	1000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (i) a)( Indivdual Water absorption)	-	1000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) b)(Compressive strength (Average of eight test specimens))	-	2500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) ii)(Wet Abrasion resistance (Average of three test specimens))	-	2000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) ii)(Dry Abrasion resistance (Average of three test specimens))	-	2000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) b)(Average Tensile splitting strength )	-	3000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (v) b)(Average Flexural strength )	-	4000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 10 cycles)	-	2500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 25 cycles)	-	5000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 50 cycles)	-	10000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 10 cycles)	-	2500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 25 cycles)	-	5000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 50 cycles)	-	10000	-
Clause 7.1.1 (General Quality)	-	500	-
Clauses 7.1.2 & 9.1.2 (Visual Inspection)	-	500	-
Clause 7.1.3 (Colour and Texture)	-	500	-
Clause 7.2, Table No. 2, SI No. (i) (Width, W)	-	500	-
Clause 7.2, Table No. 2, SI No. (ii) (Length, L)	-	500	-
Clause 7.2, Table No. 2, SI No. (iii) (Thickness, Th)	-	500	-
Clause 7.2, Table No. 2, SI No. (iv) (Aspect Ratio, L/Th)	-	500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Width)	-	500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Depth)	-	500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Thickness of wearing Layer)	-	500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Plan Area (Asp))	-	500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Ratio of wearing face area and Plan area (Asw/Asp))	-	500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (ix)(Deviation from squareness)	-	500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (i) b)(Water absorption (Average of three test specimens))	-	1000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (i) a)( Indivdual Water absorption)	-	1000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) b)(Compressive strength (Average of eight test specimens))	-	2500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) ii)(Wet Abrasion resistance (Average of three test specimens))	-	2000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) ii)(Dry Abrasion resistance (Average of three test specimens))	-	2000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) b)(Average Tensile splitting strength )	-	3000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (v) b)(Average Flexural strength )	-	4000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 10 cycles)	-	2500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 25 cycles)	-	5000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 50 cycles)	-	10000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 10 cycles)	-	2500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 25 cycles)	-	5000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 50 cycles)	-	10000	-

26 Jul, 2027

-
-

11854

National Test House (NR) - NTH, Ghaziabad

8101304

IS 14255 (1995)

Aertal bunched cables - For working voltages up to and including 1100 Volts - Specification

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.1 a) i)(Tests on phase/street light conductor: tensile test - Test method IS10810:Part 2)	-	250	-
10.1 a) ii)(Wrapping test - 10810: Part 3)	-	250	-
10.1 a) iii)(Resistance test - IS10810: Part 5)	-	250	-
10.1 b) i)(Test on messenger conductor: Breaking load - IS 10810: Part 2)	-	250	-
10.1 b) ii)(Test on messenger conductor: Elongation test - Cl 11.3)	-	250	-
10.1 b) iii)(Test on messenger conductor: Resistance test - IS 10810: Part 5)	-	250	-
10.1 c) i)(Physical tests for XLPE Insulation: Tensile strength - IS 10810: Part 7)	-	250	-
10.1 c) i)(Physical tests for XLPE Insulation: elongation at break - IS 10810: part 7)	-	250	-
10.1 c) ii)(Ageing in air oven : Tensile strength variation - IS 10810:Part 11)	-	250	-
10.1 c) ii)(Ageing in air oven : Elongation variation- IS 10810: Part 11)	-	250	-
10.1 c) iii)(Hot set test: Elongation under load - IS 10810: Part 30)	-	250	-
10.1 c) iii)(Hot set test: Permanent elongation (set) after cooling - IS 10810: Part 30)	-	250	-
10.1 c) iv)(Shrinkage test : Crack Observed - 10810:Part 12)	-	250	-
10.1 c) iv)(Shrinkage test : Shrinkage - 10810:Part 12)	-	250	-
10.1 c) v)(Water ahsorption (Gravimetric) - IS 10810: Part 33 )	-	250	-
10.1 d) i)(Physical test for PE insulation: Tensile strength - IS 10810: Part 7 )	-	250	-
10.1 d) i)(Physical test for PE insulation: elongation at break - IS 10810: Part 7)	-	250	-
10.1 d) ii)(Melt flow index- IS 10810: Part 23)	-	250	-
10.1 d) iv)(Vicat softening point -IS 10810: Part 22)	-	250	-
10.1 d) v)(Environmental stress cracking -IS 10810:Part29)	-	250	-
10.1 f)(Insulation resistance (Volume resistivity) test a) volume resistivity at 27°C - IS 10810: Part 43)	-	250	-
10.1 f)(Insulation resistance (Volume resistivity) test b) volume resistivity at 70°C - IS 10810: Part 43)	-	250	-
10.1 g)(High voltage test - IS10810:Part 45)	-	250	-
6.4(size of street lighting conductor)	-	250	-
6.5(Size of messenger conductor )	-	250	-
4.1(Phase/Street Lighting conductor)	-	250	-
4.2(Messenger (Neutral Conductor or Otherwise))	-	250	-
6.2(No of strands)	-	250	-
5.1(Insulation)	-	250	-
6.1(Flexibility class)	-	250	-
6.2(Compactness)	-	250	-
6.2(Surface)	-	250	-
6.3(Protective barrier)	-	250	-
6.6(Direction of outer layer)	-	250	-
7.2( Thickness of insulation)	-	250	-
7.3(Tolerance on thickness of insulation )	-	250	-
7.5(Colour of the insulation )	-	250	-
9.1(Assembly (Laying up))	-	250	-
9.3(Direction of lay)	-	250	-
11.4(Bending Test on the Completed Cable ( Optional) )	-	250	-

26 Oct, 2028

-
-

11855

Vardhamana Testing Laboratory OPC Pvt. Ltd.

8178226

IS 10322 : Part 5 : Sec 1 (2012)

Luminaires: Part 5 particular requirements: Sec 1 fixed general purpose luminaires (First Revision)

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Marking)	-	1000	-
7.0(Construction)	-	3000	-
8.0(Creepage Distance and Clearances)	-	2000	-
9.0(Provision for earthing)	-	1000	-
10.0(Terminals)	-	1000	-
11.0(External & Internal Wiring)	-	1000	-
12.0(Protection against electric shock)	-	1000	-
13.0(Endurance Tests and Thermal Tests)	-	8000	-
14.0(Resistance to Dust & Moisture)	-	5000	-
15.0(Insulation Resistance and Electric Strength)	-	4000	-
16.0(Resistance to Heat , fire and tracking)	-	6000	-
17.0(Photometric Test)	-	7000	-
4(General Test Requireements)	-	1000	-
5(Classification of Luminaires')	-	1000	-

29 Apr, 2027

-
Exclusion: Cl.7.0 (Construction/ UV radiation)

11856

ABSOLUTE TESTING SERVICES, FARIDABAD

8174526

IS 302 : Part 2 : Sec 15 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 15 appliances for heating liquids (First Revision)

19200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	3500	-
7(Marking and instructions)	-	3500	-
8(Protection against live parts)	-	3500	-
10(POWER INPUT AND CURRENT)	-	3500	-
11(HEATING)	-	3500	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	3500	-
14(TRANSIENT OVERVOLTAGES)	-	3500	-
15(MOISTURE RESISTANCE)	-	3500	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	3500	-
19(ABNORMAL OPERATION)	-	3500	-
20(STABILITY AND MECHANICAL HAZARDS)	-	3500	-
21(MECHANICAL STRENGTH)	-	3500	-
22(CONSTRUCTION)	-	3500	-
23(INTERNAL WIRING)	-	3500	-
24(COMPONENTS)	-	3500	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	3500	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	3500	-
27(PROVISION FOR EARTHING)	-	3500	-
28(SCREWS AND CONNECTIONS)	-	3500	-
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	3500	-
30(RESISTANCE TO HEAT AND FIRE)	-	3500	-
31(RESISTANCE TO RUSTING)	-	3500	-
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	3500	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	2500	-

13 Nov, 2026

-
-

11857

CIPET, Hyderabad

6111634

IS 16703 (2017)

Textiles - High density polyethylene (HDPE) polypropylene (PP) woven sacks for packaging of 25 kg polymer materials - Specification

High density polyethylene (HDPE) polypropylene (PP) wo

18580 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Mass of Bale)	-	250	-
5.2 Table 1(Dimensions)	-	250	-
5.2 Table 1(Mass of sack, Gusseted type, g - IS 1964)	-	250	-
5.2 Table 1(Ends per dm)	-	250	-
5.2 Table 1(Picks per dm)	-	250	-
5.2 Table 1(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70mm1)] Min, N) (kgf): - IS 1969 (Part 1))	-	2200	-
5.2 Table 1(Breaking strength of bottom seam (Ravelled strip method), Min, N) (kgf) - IS 9030)	-	1100	-
5.2 Table 1(Drop impact strength)	-	1100	-
(Clauses 4.2, 5.1, 5.2, 5.3 and 5.4) Table 1 (Ash Content ,a) For UV stabilized sacks)	-	950	-

23 Feb, 2027

-
Including w.e.f. 28.10.2024

11858

Stellar Test House, Noida

8171606

IS 2185 : Part 1 (2005)

Concrete masonry units - Specification: Part 1 hollow and solid concrete blocks (Third Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.2 & 4.2(PHYSICAL REQUIREMENTS-Nominal Dimensions 1.Length 2.Hight 3. Width)	-	1000	-
9.2 & 4.2.3(Nominal Dimensions-variation in the length of units )	-	0	-
9.2 & 4.2.3(Nominal Dimensions -variation in height and width of units )	-	1000	-
9.2 & 4.2.4, Table-1(Nominal Dimensions-thickness of the face shell)	-	0	-
9.2 & 4.2.4, Table-1(Nominal Dimensions-thickness of the Web shell)	-	1000	-
9.3 & 5.1 & 5.2 Table 2(PHYSICAL REQUIREMENTS-Blocks Density - 1.Hollow (Open and Closed Cavity) Concrete Block- Grade Aor Grade B 2.Solid Concrete Block — Grade C)	-	1000	-
9.4- Table 2(PHYSICAL REQUIREMENTS - Compressive Strength 1.Minimum Average Compressive Strength of Units 2.Minimum Average Compressive Strength of Individual Unit)	-	5000	-
9.5(PHYSICAL REQUIREMENTS -Water Absorption)	-	1500	-
9.6(PHYSICAL REQUIREMENTS -Drying Shrinkage)	-	2500	-
9.7(PHYSICAL REQUIREMENTS -Moisture Movement)	-	2000	-
15(Marking)	-	0	-
9.2 & 4.2(PHYSICAL REQUIREMENTS-Nominal Dimensions 1.Length 2.Hight 3. Width)	-	0	-
9.2 & 4.2.3(Nominal Dimensions-variation in the length of units )	-	0	-
9.2 & 4.2.3(Nominal Dimensions -variation in height and width of units )	-	0	-
9.2 & 4.2.4, Table-1(Nominal Dimensions-thickness of the face shell)	-	0	-
9.2 & 4.2.4, Table-1(Nominal Dimensions-thickness of the Web shell)	-	0	-
9.3 & 5.1 & 5.2 Table 2(PHYSICAL REQUIREMENTS-Blocks Density - 1.Hollow (Open and Closed Cavity) Concrete Block- Grade Aor Grade B 2.Solid Concrete Block — Grade C)	-	0	-
9.4- Table 2(PHYSICAL REQUIREMENTS - Compressive Strength 1.Minimum Average Compressive Strength of Units 2.Minimum Average Compressive Strength of Individual Unit)	-	0	-
9.5(PHYSICAL REQUIREMENTS -Water Absorption)	-	0	-
9.6(PHYSICAL REQUIREMENTS -Drying Shrinkage)	-	0	-
9.7(PHYSICAL REQUIREMENTS -Moisture Movement)	-	0	-
15(Marking)	-	0	-
9.2 & 4.2(PHYSICAL REQUIREMENTS-Nominal Dimensions 1.Length 2.Hight 3. Width)	-	0	-
9.2 & 4.2.3(Nominal Dimensions-variation in the length of units )	-	0	-
9.2 & 4.2.3(Nominal Dimensions -variation in height and width of units )	-	0	-
9.2 & 4.2.4, Table-1(Nominal Dimensions-thickness of the face shell)	-	0	-
9.2 & 4.2.4, Table-1(Nominal Dimensions-thickness of the Web shell)	-	0	-
9.3 & 5.1 & 5.2 Table 2(PHYSICAL REQUIREMENTS-Blocks Density - 1.Hollow (Open and Closed Cavity) Concrete Block- Grade Aor Grade B 2.Solid Concrete Block — Grade C)	-	0	-
9.4- Table 2(PHYSICAL REQUIREMENTS - Compressive Strength 1.Minimum Average Compressive Strength of Units 2.Minimum Average Compressive Strength of Individual Unit)	-	0	-
9.5(PHYSICAL REQUIREMENTS -Water Absorption)	-	0	-
9.6(PHYSICAL REQUIREMENTS -Drying Shrinkage)	-	0	-
9.7(PHYSICAL REQUIREMENTS -Moisture Movement)	-	0	-
15(Marking)	-	0	-

26 Sep, 2028

-
Included w.e.f. 28.03.2024

11859

INDIAN TESTING LABORATORY PRIVATE LIMITED, GREATER NOIDA

8171306

IS 14333 (2022)

Polyethylene Pipes for Sewerage and Industrial Chemicals and Effluent ï¿½ Specification (First Revision)

PE63,PE80,PE100

27500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2.1,T2("Base Density (At 27°C Temp.)-IS 7328:2020 ")	-	750	-
5.2.1,T2(Melt Flow Rate (At 190°C /5kg)-IS 2530:1963)	-	1200	-
5.2.1,T2(Thermal Stability(Oxidation Induction Time)-IS 4984:2016(Annexure-B))	-	2500	-
5.2.1,T2("Volatile Matter- IS 4984:2016 (Annexure-C)")	-	1000	-
5.2.1,T2("Water Content-IS 4984:2016 (Annexure-D)")	-	1000	-
5.2.1.1, T2(Compound Density-IS 7328:2020)	-	750	-
5.2.1.1, T2("Compound carbon black -IS 2530:1963 content")	-	1200	-
5.2.1.1, T2(Compound Toluene extract - Any Method)	-	1000	-
5.2.1.1, T2(Compound maximum volatile matter -IS 4984:2016 (Annexure-C))	-	1000	-
5.2.1.1, T2(Compound carbon black particle size- Any Method)	-	1200	-
5.2.1.1, T2(Compound ash content - Any Method)	-	1200	-
5.2.1.1, T2("Compound carbon black -IS 2530:1963 dispersion")	-	1200	-
5.3(Density of Higher olefin - IS 7328:2020)	-	750	-
5.3(Olefin Constituents- 14333-2022)	-	1000	-
5.3(Loading of Carbon Black - IS 2530:1963)	-	1200	-
5.3(Ash content- Any Method)	-	1200	-
5.3(Toluene extract - Any Method)	-	1000	-
5.3("Maximum volatile matter -IS 4984:2016 (Annexure-C)")	-	1000	-
5.3(Carbon black particle size - Any Method)	-	750	-
6(Pipe Description - IS 14333-2022)	-	100	-
6.2(Colour- IS 14333-2022)	-	250	-
7.1(Visual Appearance- IS 14333-2022)	-	250	-
7.2(Length- IS 14333-2022)	-	100	-
7.4,T3 of IS 4984(Outside Diameter-IS 4984-2016)	-	100	-
7.4,T4 of IS 4984(wall Thickness-IS 4984-2016)	-	100	-
7.4,T3 of IS 4984(Ovality-IS 4984-2016)	-	100	-
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 27 oC , Test Period - 100 hrs.-IS 4984-2016 (Annexure-E))	-	1500	-
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 48 hrs.-IS 4984-2016 (Annexure-E))	-	2500	-
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 165 hrs.-IS 4984-2016 (Annexure-E))	-	2500	-
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 1000 hrs.-IS 4984-2016 (Annexure-E))	-	7500	-
8.1.2, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 48 hrs.-IS 4984-2016 (Annexure-E))	-	2500	-
8.2("Longitudinal Reversion Test - IS 4984-2016 (Annexure-F)")	-	1200	-
8.3(Carbon black content- IS 2530-1963)	-	1200	-
8.3(Carbon black content Dispersion- IS 2530-1963)	-	1000	-
8.4(Melt Flow rate(Temperature - 190oC,Mass 5kg)-IS 2530-1963)	-	1200	-
8.5(Oxidation Induction Time -IS 4984:2016(Annexure-B))	-	2500	-
8.6(Density-IS 7328:2020)	-	750	-
8.7("Tensile Strength for Butt Fusion - IS 4984-2016 (Annexure-G)")	-	1200	-
8.8,T5("Elongation -IS 4984-2016 (Annexure-H)")	-	1000	-
8.9(Slow Crack Growth Rate{Internal Pressure creep Rupture test, Temperature - 80±1 oC , Test Pressure – 0.80MPa, Test Period - 500 hrs.-IS 4984-2016 (Annexure-E &J))	-	3500	-
5.2.1,T2("Base Density (At 27°C Temp.)-IS 7328:2020 ")	-	-	-
5.2.1,T2(Melt Flow Rate (At 190°C /5kg)-IS 2530:1963)	-	-	-
5.2.1,T2(Thermal Stability(Oxidation Induction Time)-IS 4984:2016(Annexure-B))	-	-	-
5.2.1,T2("Volatile Matter- IS 4984:2016 (Annexure-C)")	-	-	-
5.2.1,T2("Water Content-IS 4984:2016 (Annexure-D)")	-	-	-
5.2.1.1, T2(Compound Density-IS 7328:2020)	-	-	-
5.2.1.1, T2("Compound carbon black -IS 2530:1963 content")	-	-	-
5.2.1.1, T2(Compound Toluene extract - Any Method)	-	-	-
5.2.1.1, T2(Compound maximum volatile matter -IS 4984:2016 (Annexure-C))	-	-	-
5.2.1.1, T2(Compound carbon black particle size- Any Method)	-	-	-
5.2.1.1, T2(Compound ash content - Any Method)	-	-	-
5.2.1.1, T2("Compound carbon black -IS 2530:1963 dispersion")	-	-	-
5.3(Density of Higher olefin - IS 7328:2020)	-	-	-
5.3(Olefin Constituents- 14333-2022)	-	-	-
5.3(Loading of Carbon Black - IS 2530:1963)	-	-	-
5.3(Ash content- Any Method)	-	-	-
5.3(Toluene extract - Any Method)	-	-	-
5.3("Maximum volatile matter -IS 4984:2016 (Annexure-C)")	-	-	-
5.3(Carbon black particle size - Any Method)	-	-	-
6(Pipe Description - IS 14333-2022)	-	-	-
6.2(Colour- IS 14333-2022)	-	-	-
7.1(Visual Appearance- IS 14333-2022)	-	-	-
7.2(Length- IS 14333-2022)	-	-	-
7.4,T3 of IS 4984(Outside Diameter-IS 4984-2016)	-	-	-
7.4,T4 of IS 4984(wall Thickness-IS 4984-2016)	-	-	-
7.4,T3 of IS 4984(Ovality-IS 4984-2016)	-	-	-
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 27 oC , Test Period - 100 hrs.-IS 4984-2016 (Annexure-E))	-	-	-
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 48 hrs.-IS 4984-2016 (Annexure-E))	-	-	-
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 165 hrs.-IS 4984-2016 (Annexure-E))	-	-	-
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 1000 hrs.-IS 4984-2016 (Annexure-E))	-	-	-
8.1.2, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 48 hrs.-IS 4984-2016 (Annexure-E))	-	-	-
8.2("Longitudinal Reversion Test - IS 4984-2016 (Annexure-F)")	-	-	-
8.3(Carbon black content- IS 2530-1963)	-	-	-
8.3(Carbon black content Dispersion- IS 2530-1963)	-	-	-
8.4(Melt Flow rate(Temperature - 190oC,Mass 5kg)-IS 2530-1963)	-	-	-
8.5(Oxidation Induction Time -IS 4984:2016(Annexure-B))	-	-	-
8.6(Density-IS 7328:2020)	-	-	-
8.7("Tensile Strength for Butt Fusion - IS 4984-2016 (Annexure-G)")	-	-	-
8.8,T5("Elongation -IS 4984-2016 (Annexure-H)")	-	-	-
8.9(Slow Crack Growth Rate{Internal Pressure creep Rupture test, Temperature - 80±1 oC , Test Pressure – 0.80MPa, Test Period - 500 hrs.-IS 4984-2016 (Annexure-E &J))	-	-	-

15 Aug, 2028

-
Revised Version of IS 14333:2022. Included w.e.f. 07.03.2023

11860

CAHS,TANUVAS, CHENNAI

6168114

IS 1664 (2002)

Mineral mixtures for supplementing cattle feeds - Specification (Fourth Revision)

1400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.2(Bacillus anthracis)	-	1400		-

-
-

11861

Vardhamana Testing Laboratory OPC Pvt. Ltd.

8178226

IS 10322 : Part 5 : Sec 5 (2013)

Luminaires: Part 5 particular requirements: Sec 5 floodlights (First Revision)

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.0(Construction)	-	3000	-
6.0(Marking)	-	1000	-
8.0(Creepage Distance and Clearances)	-	2000	-
9.0(Provision for earthing)	-	1000	-
12.0(Protection against electric shock)	-	1000	-
13.0(Endurance Tests and Thermal Tests)	-	8000	-
14.0(Resistance to Dust & Moisture)	-	5000	-
15.0(Insulation Resistance and Electric Strength)	-	4000	-
16.0(Resistance to Heat , fire and tracking)	-	6000	-
17.0(Photometric Test)	-	7000	-
4(General Test Requireements)	-	1000	-
5(Classification of Luminaires')	-	1000	-
10.0(Terminals)	-	1000	-
11.0(External & Internal Wiring)	-	1000	-

29 Apr, 2027

-
-

11862

Vardhamana Testing Laboratory OPC Pvt. Ltd.

8178226

IS 10322 : PART 5 : SEC 3 (2012)

Luminaires: Part 5 particular requirements: Sec 3 luminaires for road and street lighting (First Revision)

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.0(Construction)	-	3000	-
8.0(Creepage Distance and Clearances)	-	2000	-
9.0(Provision for earthing)	-	1000	-
10.0(Terminals)	-	1000	-
11.0(External & Internal Wiring)	-	1000	-
12.0(Protection against electric shock)	-	1000	-
13.0(Endurance Tests and Thermal Tests)	-	8000	-
14.0(Resistance to Dust & Moisture)	-	5000	-
15.0(Insulation Resistance and Electric Strength)	-	4000	-
16.0(Resistance to Heat , fire and tracking)	-	6000	-
17.0(Photometric Test)	-	7000	-
6.0(Marking)	-	1000	-
5(Classification of Luminaires')	-	1000	-
4(General Test Requireements)	-	1000	-

29 Apr, 2027

-
-

11863

CIPET, Hyderabad

6111634

IS 17216 (2019)

Polyethylene Mulch Films for Agriculture and Horticulture • Specification

Polyethylene Mulch Films for Agriculture

17950.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.1(Density)	-	500	-
5.1.2(Melt Flow Index)	-	1100	-
5.1.4(Carbon black, Density)	-	925	-
5.1.4(Carbon black, Toluene extract)	-	925	-
5.1.4(Carbon black, Volatile matter)	-	925	-
5.1.4(Carbon black, particle size)	-	925	-
5.1.4(Carbon black, Tint strength)	-	925	-
5.2.1(Visual Appearance)	-	300	-
5.2.4(Odour)	-	250	-
5.3.1.1(Tolerance on thickness)	-	250	-
5.3.1.2(Tolerance on width)	-	250	-
5.3.2(Impact Strength)	-	1100	-
5.3.2, Table 1(Nominal Film Thickness)	-	250	-
5.3.2, Table 1(Impact Failure Mass)	-	1100	-
5.3.3(Tensile Strength at Break)	-	2200	-
5.3.4(Elongation at Break)	-	2200	-
5.3.5(Coefficient of Friction)	-	850	-
5.3.6(Elmendorf Tear Strength)	-	2200	-
5.3.7(Opacity)	-	575	-
5.4, Table 2(Carbon black, percent)	-	925	-
5.4, Table 2(Ash content, percent)	-	950	-
5.4, Table 2(Carbon black dispersion)	-	700	-
5.5(Service Life)	-	75860	-

23 Feb, 2027

-
Including w.e.f. 28.10.2024

11864

CIPET, Hyderabad

6111634

IS 16190 (2014)

Agro textiles - High density polyethylene (HDPE) laminated woven lay flat tube for irrigation purpose - Specification

HDPE laminated woven lay flat tube for irrigation

114531 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6. Table 2 v) IS 14714 (Abrasion resistance : Loss in breaking strength shall not be more than 15 percent)	-	875	-
6. Table 2 ix) a) IS 7016(Part 8) (Oven method) (Accelerated ageing test for 72 h at 70 ± 1°C: Loss in breaking strength shall not be more than 15 percent Wrap)	-	1800	-
6. Table 2 ix) b) IS 7016(Part 8) (Oven method) (Accelerated ageing test for 72 h at 70 ± 1°C: Loss in breaking strength shall not be more than 1 5 percent Weft)	-	1800	-
6. Table 2 iii) IS 1969 (Part 1) ( Elongation at break)	-	1100	-
6.5( Length : Unless specified otherwise, the standard length shall be 30 m. A tolerance of +5 percent shall be permitted on the length prescribed for the lay flat tube by the purchaser. No negative tolerance shall be permitted)	-	250	-
5,5.3 Table 1.(MANUFACTURE The laminated HDPE woven fabric is to be formed in to lay flat tube of the required inside diameter using a heat sealing process keeping the minimum overlap as specified in Table 1.)	-	250	-
6. Table 2 vi) a) IS 14293 ( Trapezoid tear strength: Wrap)	-	1100	-
6. Table 2 vi) b) IS 14293 ( Trapezoid tear strength : Weft)	-	1100	-
6. Table 2 i) IS 1964 (Mass)	-	250	-
6. Table 2 vii) Annex C (Puncture strength)	-	1100	-
6. Table 2 iv) b) Annex B(Retention of breaking strength after UV exposure of 500 h : weft 85 percent of original actual value (fabric))	-	1100	-
6. Table 2 ii) b) IS 1969 (Part 1) ( Breaking strength before UV exposure : Weft)	-	1100	-
6. Table 2 iv) a) Annex B(Retention of breaking strength after UV exposure of 500 h : Wrap 85 percent of original actual value (fabric))	-	1100	-
6. Table 2 ii) a) IS 1969 (Part 1) ( Breaking strength before UV exposure : Wrap)	-	1100	-
4,4.1 IS 6192( MATERIALS HDPE Tapes)	-	500	-
4.2 IS 6899(MATERIALS HDPE Fabric)	-	250	-
6. Table 2 viii) Annex D ( Environmental stress cracking test : )	-	1200	-
6. Table 2 x) Annex E (Cold cracking resistance test at –5°C)	-	1100	-
6.1 Table 1(Internal Diameter : The inside diameter of the lay flat tube shall be as given in Table 1. The internal diameter of the lay flat tube shall be measured by a suitable conical plug gauge and shall conform to the tolerance specified in Table 1)	-	250	-
6.2(Workmanship)	-	300	-
6.3,6.3.1(Hydrostatic Burst Pressure Test)	-	1000	-
6.4 , 6.4.1(Proof Pressure Tes)	-	1000	-
6.6(Kink Test :)	-	1100	-
6.7 IS 1969 (Part 1)(Welded Seam Strength Before UV Exposure : When a sample of fabric with seam cut from the lay flat tube is tested for welded seam strength as per the method specified in IS 1969 (Part 1), welded seam strength before UV exposure shall be not less than the 80 percent of the original actual fabric strength)	-	1100	-
6.8 Annex B and IS 1969 (Part 1)(Welded Seam Strength After UV Exposure: When a sample of fabric with seam cut from the lay flat tube is tested for welded seam strength as per the method specified in Annex B and IS 1969 (Part 1), the loss in welded seam strength after UV exposure shall be not more than 15 percent)	-	1100	-

23 Feb, 2027

-
Including w.e.f. 28.10.2024

11865

CIPET, Hyderabad

6111634

IS 17358 : Part 1 (2020)

Agro textiles “ Fencing nets for agriculture and horticulture purposes “ Specification Part 1 Fencing nets made from extruded polymer mesh

Fencing nets made from extruded polymer mesh

17948 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4, table 1,2,3(MATERIALS)	-	5700	-
5.2(Colour)	-	250	-
(ii)(Mesh Size, Traverse Direction)	-	250	-
(iii)(Mesh Size, Cross Direction)	-	250	-
(vi)(Length)	-	250	-
(vi)(Width)	-	250	-
(vii) a(Tensile Strength before UV exposure, Machine Direction)	-	1100	-
(ix) a(Tensile Strength after UV exposure, Machine Direction)	-	1100	-
(vii) b(Tensile Strength before UV exposure, Traverse Direction)	-	1100	-
(ix) b(Tensile Strength after UV exposure, Traverse Direction)	-	1100	-
(viii) a(Elongation before UV exposure, Machine Direction)	-	1100	-
(viii) b(Elongation before UV exposure, Traverse Direction)	-	1100	-

23 Feb, 2027

-
Including w.e.f. 28.10.2024

11866

ABSOLUTE TESTING SERVICES, FARIDABAD

8174526

IS 302 : Part 2 : Sec 14 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 14 electric kitchen machines (First Revision)

18125 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification- IS 302-1 )	-	3500	-
6(Classification- IS 302-1)	-	3500	-
7.1(Marking- IS 302-1)	-	3500	-
7.1(Marking- IS 302-1)	-	3500	-
7.1(Marking- IS 302-1)	-	3500	-
7.1(Marking- IS 302-1)	-	3500	-
7.1(Marking- IS 302-1)	-	3500	-
7.1(Marking- IS 302-1)	-	3500	-
7.1(Marking- IS 302-1)	-	3500	-
7.3(Marking- IS 302-1)	-	3500	-
7.4(Marking- IS 302-1)	-	3500	-
7.6(Marking- IS 302-1)	-	3500	-
7.7(Marking- IS 302-1)	-	3500	-
7.8(Marking- IS 302-1)	-	3500	-
7.11(Marking- IS 302-1)	-	3500	-
7.12(Marking- IS 302-1)	-	3500	-
7.13(Marking- IS 302-1)	-	3500	-
7.14(Marking- IS 302-1)	-	3500	-
7.15(Marking- IS 302-1)	-	3500	-
7.101(Marking)	-	3500	-
8( Protection Against Electric Shock, IS 302-1)	-	3500	-
10(Power Input and Current, IS 302-1)	-	3500	-
11(Heating, IS 302-1)	-	3500	-
11(Heating, IS 302-1)	-	3500	-
11(Heating, IS 302-1)	-	3500	-
11(Heating, IS 302-1)	-	3500	-
11(Heating, IS 302-1)	-	3500	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	3500	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	3500	-
14(Transient Over Voltages, IS 302-1)	-	3500	-
15.1(Moisture Resistance, IS 302-1)	-	3500	-
15.2(Moisture Resistance, IS 302-1)	-	3500	-
15(Moisture Resistance, IS 302-1)	-	3500	-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	3500	-
19.7(Abnormal Operation, IS 302-1)	-	3500	-
19.8(Abnormal Operation, IS 302-1)	-	3500	-
19.9(Abnormal Operation, IS 302-1)	-	3500	-
19.1(Abnormal Operation, IS 302-1)	-	3500	-
19.101(Abnormal Operation)	-	3500	-
19.102(Abnormal Operation)	-	3500	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	3500	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	3500	-
20.101(Stability & Mechanical Hazards)	-	3500	-
20.102(Stability & Mechanical Hazards)	-	3500	-
20.103(Stability & Mechanical Hazards)	-	3500	-
20.104(Stability & Mechanical Hazards)	-	3500	-
20.105(Stability & Mechanical Hazards)	-	3500	-
20.106(Stability & Mechanical Hazards)	-	3500	-
20.107(Stability & Mechanical Hazards)	-	3500	-
20.108(Stability & Mechanical Hazards)	-	3500	-
20.109(Stability & Mechanical Hazards)	-	3500	-
20.110(Stability & Mechanical Hazards)	-	3500	-
20.111(Stability & Mechanical Hazards)	-	3500	-
20.112(Stability & Mechanical Hazards)	-	3500	-
20.113(Stability & Mechanical Hazards)	-	3500	-
20.114(Stability & Mechanical Hazards)	-	3500	-
20.115(Stability & Mechanical Hazards)	-	3500	-
20.116(Stability & Mechanical Hazards)	-	3500	-
21.1(Mechanical Strength, IS 302-1)	-	3500	-
21.2(Mechanical Strength, IS 302-1)	-	3500	-
22(Construction, IS 302-1)	-	3500	-
22.101(Construction)	-	3500	-
22.102(Construction)	-	3500	-
23.1(Internal Wiring, IS 302-1)	-	3500	-
23.2(Internal Wiring, IS 302-1)	-	3500	-
23.3(Internal Wiring, IS 302-1)	-	3500	-
23.4(Internal Wiring, IS 302-1)	-	3500	-
23.5(Internal Wiring, IS 302-1)	-	3500	-
23.6(Internal Wiring, IS 302-1)	-	3500	-
23.7(Internal Wiring, IS 302-1)	-	3500	-
23.8(Internal Wiring, IS 302-1)	-	3500	-
23.9(Internal Wiring, IS 302-1)	-	3500	-
23.10(Internal Wiring, IS 302-1)	-	3500	-
24.1(Components, IS 302-1)	-	3500	-
24.2(Components, IS 302-1)	-	3500	-
24.5(Components, IS 302-1)	-	3500	-
24.6(Components, IS 302-1)	-	3500	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	3500	-
26(Terminals for External Conductors, IS 302-1)	-	3500	-
27(Provision for Earthing, IS 302-1)	-	3500	-
27.2(Provision for Earthing, IS 302-1)	-	3500	-
27.3(Provision for Earthing, IS 302-1)	-	3500	-
27.4(Provision for Earthing, IS 302-1)	-	3500	-
27.5(Provision for Earthing, IS 302-1)	-	3500	-
28(Screws & Connections, IS 302-1)	-	3500	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	3500	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	3500	-
30.1(Resistance to Heat and Fire, IS 302-1)	-	3500	-
30.2(Resistance to Heat and Fire, IS 302-1)	-	3500	-
31(Resistance of Rusting, IS 302-1)	-	3500	-
32(Radiation, Toxicity and similar Hazard IS 302-1)	-	3500	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	3500	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	2500	-

13 Nov, 2026

-
Exclusion: Cl. 19.11.4.1 (Electrostatic discharges), Cl. 19.11.4.2 (Radiated fields), Cl. 19.11.4.3 (Fast transient bursts), Cl. 19.11.4.4 (Surge immunity test), Cl. 19.11.4.5 (Immunity to conducted discharges), Cl. 19.11.4.6 (Class 3 Voltage dips and interruptions), Cl. 19.11.4.7 (Harmonics)

11867

CIPET, Hyderabad

6111634

IS 16008 : Part 2 (2016)

Agro textiles “ Shade nets for agriculture and horticulture purposes “ Specification Part 2 Shade nets made from mono filament yarns (first revision)

Shade nets made from mono filament yarns

17885 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.0(Material)	-	1050	-
4.2(Fabric)	-	500	-
4.3(Colour)	-	300	-
5.0(Types)	-	1000	-
6.1(Dimensions and mass)	-	500	-
6.2 Table 1(Mass g/m2,Min)	-	250	-
6.2 Table 1(Average breaking strength of shade nets fabric (Strip method,Warpway,Weftway 325 mm × 50 mm test piece with gauge length of 200 mm), N, Min )	-	1100	-
6.2 Table 1(Warpway Weftway)	-	500	-
6.2 Table 1(Retention of breaking strength after UV exposure, N, Min)	-	1100	-
6.2 Table 1(Bursting pressure, kgf/cm2, Min)	-	1000	-

23 Feb, 2027

-
Including w.e.f. 28.10.2024

11868

CIPET, Hyderabad

6111634

IS 16008 : Part 1 (2016)

Agro textiles “ Shade nets for agriculture and horticulture purposes “ Specification Part 1 Shade nets made from tape yarns (first revision)

Shade nets made from tape yarns (first revision)

17885 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.0(Types)	-	1000	-
6.1(Dimensions and Mass - IS 1954)	-	500	-
6.2 Table 1(Mass - IS 1964)	-	250	-
6.2 Table 1(Average breaking strength of shade nets fabric (Strip method, 325 mm x 50 mm test piece with gauge length of 200 mm) - IS 1969 (Part 1))	-	1100	-
6.2 Table 1(Retention of breaking strength after UV exposure - IS 1969 (Part 1))	-	1100	-
6.2 Table 1(Colour fastness to artificial light, IS 2454)	-	850	-
6.2 Table 1(Bursting Pressure, IS 1966 (Part 1 or 2))	-	1000	-
4.3, 4(Colour)	-	300	-
4.2, 4(Fabric )	-	500	-

23 Feb, 2027

-
Including w.e.f. 28.10.2024

11869

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING AND TECHNOLOGY (CIPET):CSTS-BHOPAL

8100534

IS 5175 (2022)

Fibre ropes - Polypropylene split film monofilament and multifilament PP 2 and polypropylene high tenacity multifilament PP 3 3- 4- 8- and 12- strand ropes (fourth revision)

7250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 6, (Table 1,2,3)(Diameter)	-	250	-
Clause 6, (Table 1,2,3)(Linear Density)	-	500	-
Clause 6, (Table 1,2,3)(Minimum Breaking Force)	-	1100	-
5.2(Pitch or length of lay)	-	500	-
5.1(type A: 3-strand hawser-laid rope)	-	2000	-
5.1(type B: 4-strand shroud-laid rope)	-	0	-
5.1(type L: 8-strand braided rope)	-	0	-
5.1(type T: 12-strand braided rope)	-	0	-
Clause 6, (Table 1,2,3)(Diameter)	-	0	-
Clause 6, (Table 1,2,3)(Linear Density)	-	0	-
Clause 6, (Table 1,2,3)(Minimum Breaking Force)	-	0	-
5.2(Pitch or length of lay)	-	0	-
5.1(type A: 3-strand hawser-laid rope)	-	0	-
5.1(type B: 4-strand shroud-laid rope)	-	0	-
5.1(type L: 8-strand braided rope)	-	0	-
5.1(type T: 12-strand braided rope)	-	0	-
Clause 6, (Table 1,2,3)(Diameter)	-	0	-
Clause 6, (Table 1,2,3)(Linear Density)	-	0	-
Clause 6, (Table 1,2,3)(Minimum Breaking Force)	-	0	-
5.2(Pitch or length of lay)	-	0	-
5.1(type A: 3-strand hawser-laid rope)	-	0	-
5.1(type B: 4-strand shroud-laid rope)	-	0	-
5.1(type L: 8-strand braided rope)	-	0	-
5.1(type T: 12-strand braided rope)	-	0	-

31 Dec, 2026

-
Included w.e.f. 28-06-2023.

11870

Stellar Test House, Noida

8171606

IS 15622 (2017)

Pressed Ceramic Tiles - Specification (First Revision)

24000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5& 5.1, Table 1(Thickness- IS 13630(pt-1))	-	500	-
5& 5.1, Table 2(Thickness- IS 13630(pt-1))	-	0	-
5& 5.1, Table 3(Thickness- IS 13630(pt-1))	-	0	-
5& 5.1, Table 4(Thickness- IS 13630(pt-1))	-	0	-
6 table 5, i a (Length-IS 13630(pt-1))	-	0	-
6 table 5,i a (width-IS 13630(pt-1))	-	0	-
6 table 5, i b (Thickness- IS 13630(pt-1))	-	500	-
6 table 5, i c(Straigthness of side-IS 13630(pt-1))	-	500	-
6 table 5, i d(Rectangularity-IS 13630(pt-1))	-	500	-
6 table 5, i e(Surface flatness-IS 13630(pt-1))	-	500	-
6 table 5, i f(Surface quality-IS 13630(pt-1))	-	500	-
6 table 5, ii a(Water Absorption-IS 13630(pt-2))	-	1000	-
6 table 5, ii b(Module of rupture -IS 13630(pt-6))	-	2000	-
6 table 5, ii c(Bending Strength-IS 13630(pt-6))	-	0	-
6 table 5, ii d(Moisture Expension-IS 13630(pt-3))	-	2500	-
6 table 5, ii e(Scratch hardness of surface -IS 13630(pt-13))	-	500	-
6 table 5, ii g(Thermal shock resistance IS 13630(pt-5))	-	1500	-
6 table 5, ii h(Impact resistance-IS 13630(pt-14))	-	1500	-
6 table 5, ii k(Crazing resistance-IS 13630(pt-9))	-	2000	-
6 table 5, iii a(Resistance to staining of glazed Tilles-IS 13630(pt-8))	-	1000	-
6 table 5, iii b(Resistance to household chemicals and swimming pool water cleansers agents containing hydrofluoric acid and its compound-IS 13630(pt-8))	-	1000	-
6 table 5, iii c(Resistance to acid and alkalis (with the exception ofhydrofluoric acid and its compounds – Glazed tiles-IS 13630(pt-8))	-	1000	-
6 table 6, i a (Length-IS 13630(pt-1))	-	500	-
6 table 6, i a (width-IS 13630(pt-1))	-	500	-
6 table 7, i b (Thickness-IS 13630(pt-1))	-	500	-
6 table 8, i c(Straigthness of side-IS 13630(pt-1))	-	500	-
6 table 6, i d(Rectangularity-IS 13630(pt-1))	-	500	-
6 table 6, i e(Surface flatness-IS 13630(pt-1))	-	500	-
6 table 6, ii a(Water Absorption-IS 13630(pt-2) )	-	1000	-
6 table 6, ii b(Module of rupture -IS 13630(pt-6))	-	2000	-
6 table 6, ii c(Bending Strength-IS 13630(pt-6))	-	0	-
6 table 6, ii d(Moisture Expension-IS 13630(pt-3))	-	2500	-
6 table 6, ii e(Scratch hardness of surface-IS 13630(pt-13) )	-	500	-
6 table 6, ii h(Thermal shock resistance-IS13630(pt-5) )	-	500	-
6 table 6, ii j(Crazing resistance-IS 13630(pt-9))	-	2000	-
6 table 6, ii k(Impact resistance-IS 13630(pt-14))	-	1500	-
6 table 6, ii n(Forst resistance-IS 13630(pt-10))	-	1500	-
6 table 6, iii a(Resistance to staining of glazed Tilles)	-	1000	-
6 table 6, iii b(Resistance to household chemicals and swimming pool water cleansers agents containing hydrofluoric acid and its compound)	-	1000	-
6 table 6, iii c(Resistance to acid and alkalis (with the exception of hydrofluoric acid and its compounds – Glazed tiles)	-	1000	-
6 table 7, i a (Length-IS 13630(pt-1))	-	500	-
6 table 7, i a (width-IS 13630(pt-1))	-	500	-
6 table 7, i c(Straigthness of side-IS 13630(pt-1))	-	500	-
6 table 7, i d(Rectangularity-IS 13630(pt-1))	-	500	-
6 table 7, i e(Surface flatness-IS 13630(pt-1))	-	500	-
6 table 7, i f(Surface quality-IS 13630(pt-1))	-	500	-
6 table 7, ii a(Water Absorption-IS 13630(pt-2) )	-	1000	-
6 table 7, ii b(Module of rupture-IS 13630(pt-6) )	-	2000	-
6 table 7, ii c(Bending Strength-IS 13630(pt-6))	-	0	-
6 table 7, ii d(Moisture Expension-IS 13630(pt-3))	-	2500	-
6 table 7, ii e(Scratch hardness of surface-IS 13630(pt-13))	-	500	-
6 table 7, ii h(Thermal shock resistance-IS13630(pt-5) )	-	1500	-
6 table 7, ii j(Crazing resistance-IS 13630(pt-9))	-	2000	-
6 table 7, ii k(Impact resistance-IS 13630(pt-14))	-	1500	-
6 table 7, ii n(Forst resistance-IS 13630(pt-10))	-	1000	-
6 table 7, iii a(Resistance to staining of glazed Tilles)	-	1000	-
6 table 7, iii b(Resistance to household chemicals and swimming pool water cleansers agents containing hydrofluoric acid and its compound)	-	1000	-
6 table 7, iii c(Resistance to acid and alkalis (with the exception of hydrofluoric acid and its compounds – Glazed tiles)	-	1000	-
6 table 8, i a (Length-IS 13630(pt-1))	-	500	-
6 table 8, i a (width-IS 13630(pt-1))	-	500	-
6 table 8, i b (Thickness-IS 13630(pt-1))	-	500	-
6 table 8, i d(Rectangularity-IS 13630(pt-1))	-	500	-
6 table 8, i e(Surface flatness-IS 13630(pt-1))	-	500	-
6 table 8, i f(Surface quality-IS 13630(pt-1))	-	500	-
6 table 8, ii a(Water Absorption-IS 13630(pt-6) )	-	1000	-
6 table 8, ii b(Module of rupture-IS 13630(pt-6) )	-	2000	-
6 table 8, ii c(Bending Strength-IS 13630(pt-6))	-	0	-
6 table 8, ii d(Moisture Expension-IS 13630(pt-3))	-	2500	-
6 table 8, ii e(Scratch hardness of surface-IS 13630(pt-13) )	-	500	-
6 table 8, ii h(Thermal shock resistance-IS 13630(pt-5) )	-	1500	-
6 table 8, ii j(Crazing resistance-IS 13630(pt-9))	-	2000	-
6 table 8, ii k(Impact resistance-IS 13630(pt-14))	-	1500	-
6 table 8, ii n(Forst resistance-IS 13630(pt-10))	-	1000	-
6 table 8, ii q(Bulk Density-IS13630(pt-2))	-	1000	-
6 table 8, iii a(Resistance to staining of glazed Tilles)	-	1000	-
6 table 8 iii b(Resistance to household chemicals and swimming pool water cleansers agents containing hydrofluoric acid and its compound)	-	1000	-
6 table 8, iii c(Resistance to acid and alkalis (with the exception of hydrofluoric acid and its compounds – Glazed tiles)	-	1000	-
6 table 9, i a (Length-IS 13630(pt-1))	-	500	-
6 table 9, i a (width-IS 13630(pt-1))	-	500	-
6 table 9, i b (Thickness-IS 13630(pt-1))	-	500	-
6 table 9, i c(Straigthness of side-IS 13630(pt-1))	-	500	-
6 table 9, i d(Rectangularity-IS 13630(pt-1))	-	500	-
6 table 9, i e(Surface flatness-IS 13630(pt-1))	-	500	-
6 table 9, i f(Surface quality-IS 13630(pt-1))	-	500	-
6 table 9, ii a(Water Absorption-IS 13630(pt-6) )	-	1000	-
6 table 9, ii b(Module of rupture-IS 13630(pt-6) )	-	2000	-
6 table 9, ii c(Bending Strength-IS 13630(pt-6))	-	0	-
6 table 9, ii d(Moisture Expension-IS 13630(pt-3))	-	2500	-
6 table 9, ii e(Scratch hardness of surface-IS 13630(pt-13) )	-	500	-
6 table 9, ii h(Thermal shock resistance-IS 13630(pt-5))	-	1500	-
6 table 9, ii j(Crazing resistance-IS 13630(pt-9))	-	2000	-
6 table 9, ii k(Impact resistance-IS 13630(pt-14))	-	1500	-
6 table 9, ii q(Bulk Density-)	-	1000	-
6 table 9, iii a(Resistance to staining )	-	1000	-
6 table 9 iii b(Resistance to household chemicals and swimming pool water cleansers agents containing hydrofluoric acid and its compound)	-	1000	-
6 table 9, iii c(Resistance to acid and alkalis (with the exception of hydrofluoric acid and its compounds – Glazed tiles)	-	1000	-
5& 5.1, Table 1(Thickness- IS 13630(pt-1))	-	0	-
5& 5.1, Table 2(Thickness- IS 13630(pt-1))	-	0	-
5& 5.1, Table 3(Thickness- IS 13630(pt-1))	-	0	-
5& 5.1, Table 4(Thickness- IS 13630(pt-1))	-	0	-
6 table 5, i a (Length-IS 13630(pt-1))	-	0	-
6 table 5,i a (width-IS 13630(pt-1))	-	0	-
6 table 5, i b (Thickness- IS 13630(pt-1))	-	0	-
6 table 5, i c(Straigthness of side-IS 13630(pt-1))	-	0	-
6 table 5, i d(Rectangularity-IS 13630(pt-1))	-	0	-
6 table 5, i e(Surface flatness-IS 13630(pt-1))	-	0	-
6 table 5, i f(Surface quality-IS 13630(pt-1))	-	0	-
6 table 5, ii a(Water Absorption-IS 13630(pt-2))	-	0	-
6 table 5, ii b(Module of rupture -IS 13630(pt-6))	-	0	-
6 table 5, ii c(Bending Strength-IS 13630(pt-6))	-	0	-
6 table 5, ii d(Moisture Expension-IS 13630(pt-3))	-	0	-
6 table 5, ii e(Scratch hardness of surface -IS 13630(pt-13))	-	0	-
6 table 5, ii g(Thermal shock resistance IS 13630(pt-5))	-	0	-
6 table 5, ii h(Impact resistance-IS 13630(pt-14))	-	0	-
6 table 5, ii k(Crazing resistance-IS 13630(pt-9))	-	0	-
6 table 5, iii a(Resistance to staining of glazed Tilles-IS 13630(pt-8))	-	0	-
6 table 5, iii b(Resistance to household chemicals and swimming pool water cleansers agents containing hydrofluoric acid and its compound-IS 13630(pt-8))	-	0	-
6 table 5, iii c(Resistance to acid and alkalis (with the exception ofhydrofluoric acid and its compounds – Glazed tiles-IS 13630(pt-8))	-	0	-
6 table 6, i a (Length-IS 13630(pt-1))	-	0	-
6 table 6, i a (width-IS 13630(pt-1))	-	0	-
6 table 7, i b (Thickness-IS 13630(pt-1))	-	0	-
6 table 8, i c(Straigthness of side-IS 13630(pt-1))	-	0	-
6 table 6, i d(Rectangularity-IS 13630(pt-1))	-	0	-
6 table 6, i e(Surface flatness-IS 13630(pt-1))	-	0	-
6 table 6, ii a(Water Absorption-IS 13630(pt-2) )	-	0	-
6 table 6, ii b(Module of rupture -IS 13630(pt-6))	-	0	-
6 table 6, ii c(Bending Strength-IS 13630(pt-6))	-	0	-
6 table 6, ii d(Moisture Expension-IS 13630(pt-3))	-	0	-
6 table 6, ii e(Scratch hardness of surface-IS 13630(pt-13) )	-	0	-
6 table 6, ii h(Thermal shock resistance-IS13630(pt-5) )	-	0	-
6 table 6, ii j(Crazing resistance-IS 13630(pt-9))	-	0	-
6 table 6, ii k(Impact resistance-IS 13630(pt-14))	-	0	-
6 table 6, ii n(Forst resistance-IS 13630(pt-10))	-	0	-
6 table 6, iii a(Resistance to staining of glazed Tilles)	-	0	-
6 table 6, iii b(Resistance to household chemicals and swimming pool water cleansers agents containing hydrofluoric acid and its compound)	-	0	-
6 table 6, iii c(Resistance to acid and alkalis (with the exception of hydrofluoric acid and its compounds – Glazed tiles)	-	0	-
6 table 7, i a (Length-IS 13630(pt-1))	-	0	-
6 table 7, i a (width-IS 13630(pt-1))	-	0	-
6 table 7, i c(Straigthness of side-IS 13630(pt-1))	-	0	-
6 table 7, i d(Rectangularity-IS 13630(pt-1))	-	0	-
6 table 7, i e(Surface flatness-IS 13630(pt-1))	-	0	-
6 table 7, i f(Surface quality-IS 13630(pt-1))	-	0	-
6 table 7, ii a(Water Absorption-IS 13630(pt-2) )	-	0	-
6 table 7, ii b(Module of rupture-IS 13630(pt-6) )	-	0	-
6 table 7, ii c(Bending Strength-IS 13630(pt-6))	-	0	-
6 table 7, ii d(Moisture Expension-IS 13630(pt-3))	-	0	-
6 table 7, ii e(Scratch hardness of surface-IS 13630(pt-13))	-	0	-
6 table 7, ii h(Thermal shock resistance-IS13630(pt-5) )	-	0	-
6 table 7, ii j(Crazing resistance-IS 13630(pt-9))	-	0	-
6 table 7, ii k(Impact resistance-IS 13630(pt-14))	-	0	-
6 table 7, ii n(Forst resistance-IS 13630(pt-10))	-	0	-
6 table 7, iii a(Resistance to staining of glazed Tilles)	-	0	-
6 table 7, iii b(Resistance to household chemicals and swimming pool water cleansers agents containing hydrofluoric acid and its compound)	-	0	-
6 table 7, iii c(Resistance to acid and alkalis (with the exception of hydrofluoric acid and its compounds – Glazed tiles)	-	0	-
6 table 8, i a (Length-IS 13630(pt-1))	-	0	-
6 table 8, i a (width-IS 13630(pt-1))	-	0	-
6 table 8, i b (Thickness-IS 13630(pt-1))	-	0	-
6 table 8, i d(Rectangularity-IS 13630(pt-1))	-	0	-
6 table 8, i e(Surface flatness-IS 13630(pt-1))	-	0	-
6 table 8, i f(Surface quality-IS 13630(pt-1))	-	0	-
6 table 8, ii a(Water Absorption-IS 13630(pt-6) )	-	0	-
6 table 8, ii b(Module of rupture-IS 13630(pt-6) )	-	0	-
6 table 8, ii c(Bending Strength-IS 13630(pt-6))	-	0	-
6 table 8, ii d(Moisture Expension-IS 13630(pt-3))	-	0	-
6 table 8, ii e(Scratch hardness of surface-IS 13630(pt-13) )	-	0	-
6 table 8, ii h(Thermal shock resistance-IS 13630(pt-5) )	-	0	-
6 table 8, ii j(Crazing resistance-IS 13630(pt-9))	-	0	-
6 table 8, ii k(Impact resistance-IS 13630(pt-14))	-	0	-
6 table 8, ii n(Forst resistance-IS 13630(pt-10))	-	1500	-
6 table 8, ii q(Bulk Density-IS13630(pt-2))	-	0	-
6 table 8, iii a(Resistance to staining of glazed Tilles)	-	0	-
6 table 8 iii b(Resistance to household chemicals and swimming pool water cleansers agents containing hydrofluoric acid and its compound)	-	0	-
6 table 8, iii c(Resistance to acid and alkalis (with the exception of hydrofluoric acid and its compounds – Glazed tiles)	-	0	-
6 table 9, i a (Length-IS 13630(pt-1))	-	0	-
6 table 9, i a (width-IS 13630(pt-1))	-	0	-
6 table 9, i b (Thickness-IS 13630(pt-1))	-	0	-
6 table 9, i c(Straigthness of side-IS 13630(pt-1))	-	0	-
6 table 9, i d(Rectangularity-IS 13630(pt-1))	-	0	-
6 table 9, i e(Surface flatness-IS 13630(pt-1))	-	0	-
6 table 9, i f(Surface quality-IS 13630(pt-1))	-	0	-
6 table 9, ii a(Water Absorption-IS 13630(pt-6) )	-	0	-
6 table 9, ii b(Module of rupture-IS 13630(pt-6) )	-	0	-
6 table 9, ii c(Bending Strength-IS 13630(pt-6))	-	0	-
6 table 9, ii d(Moisture Expension-IS 13630(pt-3))	-	0	-
6 table 9, ii e(Scratch hardness of surface-IS 13630(pt-13) )	-	0	-
6 table 9, ii h(Thermal shock resistance-IS 13630(pt-5))	-	0	-
6 table 9, ii j(Crazing resistance-IS 13630(pt-9))	-	0	-
6 table 9, ii k(Impact resistance-IS 13630(pt-14))	-	0	-
6 table 9, ii q(Bulk Density-)	-	0	-
6 table 9, iii a(Resistance to staining )	-	0	-
6 table 9 iii b(Resistance to household chemicals and swimming pool water cleansers agents containing hydrofluoric acid and its compound)	-	0	-
6 table 9, iii c(Resistance to acid and alkalis (with the exception of hydrofluoric acid and its compounds – Glazed tiles)	-	0	-
5& 5.1, Table 1(Coordinating size- IS 13630(pt-1))	-	500	-
5& 5.1, Table 1(Work size- IS 13630(pt-1))	-	500	-
5& 5.1, Table 2(Nominal size -IS 13630(pt-1))	-	0	-
5& 5.1, Table 2(Work size-IS 13630(pt-1))	-	0	-
5& 5.1, Table 3(Coordinating size- IS 13630(pt-1))	-	0	-
5& 5.1, Table 3(Work size-IS 13630(pt-1))	-	0	-
5& 5.1, Table 4(Nominal size-IS 13630(pt-1))	-	0	-
5& 5.1, Table 4(Work size-IS 13630(pt-1))	-	0	-
6 table 5, ii f(Coefficient of linear tharmal expansion from ambient temperature to100°C-IS 13630(pt-4) )	-	1500	-
6 table 5, ii m(resistance to surface abrasion of glazed Tilles)	-	2000	-
5 table 6, ii f(Resistance to surface abrasion of glazed Tilles)	-	2000	-
6 table 6, ii p(Resistance to deep abrasion of unglazed tiles)	-	1500	-
6 table 7, ii f(Resistance to surface abrasion of glazed Tilles)	-	1500	-
6 table 7, ii g(Coefficient of linear tharmal expansion from ambient temperature to100°C-IS13630(pt-4) )	-	1500	-
6 table 8, ii f(Resistance to surface abrasion of glazed Tilles)	-	1500	-
6 table 8, ii g(Coefficient of linear tharmal expansion from ambient temperature to100°C-IS 13630(pt-4) )	-	1500	-
6 table 8, ii p(Resistance to deep abrasion of unglazed tiles)	-	1500	-
6 table 9, ii f(Resistance to surface abrasion of glazed Tilles)	-	1500	-
6 table 9, ii g(Coefficient of linear tharmal expansion from ambient temperature to100°C )	-	1500	-
6 table 9, ii n(Forst resistance-IS 13630(pt-10))	-	1500	-
6 table 9, ii p(Resistance to deep abrasion of unglazed tiles)	-	1500	-

26 Sep, 2028

-
Included w.e.f. 28.03.2024 Only for dimension above 600mmx600mm and below 40mmx40mm

11871

Atharva Laboratories Pvt. Ltd. (D115A), Noida (8134206)

8134206

IS 12254 (2021)

POLYVINYLCHLORIDE PVC INDUSTRIAL BOOTS - SPECIFICATION Second Revision

47080 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2(Size)	-	100	-
5.3(Height)	-	200	-
5.4.2(Ergonomic feature)	-	300	-
5.4.3(Sole bond)	-	600	-
5.4.4(Slip resistance)	-	1000	-
5.4.5(Leak proofness)	-	480	-
5.4.6.1(Toe caps General)	-	200	-
5.4.6.2(Internal length of toecaps)	-	200	-
5.4.6.3(Corrosion resistance)	-	500	-
5.4.6.4(Impact resistance)	-	600	-
5.4.6.5(Compression resistance)	-	600	-
5.4.7(Colour)	-	200	-
5.4.8.1(Conductive Footwear)	-	2500	-
5.4.8.2(Antistatic Footwear)	-	2500	-
5.4.8.3.2(Penetration resistance)	-	1000	-
5.4.8.4(Cut resistance)	-	2500	-
5.4.8.5(Outsole resistance to acid and alkali)	-	1000	-
5.4.8.6(Outsole resistance to fuel oil)	-	1000	-
5.5.1(Upper material)	-	125	-
5.5.1(Upper Thickness)	-	125	-
5.5.2(Upper tensile strength)	-	600	-
5.5.3(Upper flexing)	-	600	-
5.5.4(Upper Hardness)	-	800	-
5.5.5(Upper Cold flex resistance)	-	1000	-
5.6.1(Lining material)	-	150	-
5.6.2(Lining Tear strength)	-	600	-
5.6.3(Lining abrasion)	-	840	-
5.6.4(Lining adhesion with upper)	-	840	-
5.7.1(Insole material)	-	250	-
5.7.2(Insole abrasion)	-	840	-
5.7.3(Water absorption and desorption)	-	600	-
5.8.2(Eyelets material)	-	150	-
5.8.2(Lace material)	-	200	-
5.8.2(Lace length)	-	200	-
5.8.2(Lace breaking load)	-	200	-
5.9.1(Insock material)	-	150	-
5.9.2(Inscok abrasion resistance)	-	840	-
5.9.3(Insock water absorption and desorption)	-	600	-
5.11.1(Outsole material)	-	125	-
5.11.1(Outsole thickness)	-	125	-
5.11.2(Outsole density)	-	500	-
5.11.3(Outsole Interlayer bond)	-	600	-
5.11.4(Outsole tear)	-	600	-
5.11.5(Outsole Abrasion)	-	840	-
5.11.6(Outsole hardness)	-	800	-
5.11.7(Outsole flexing)	-	600	-
5.11.8(Outsole cold flex resistance)	-	1000	-
6.1(Volatility)	-	300	-
6.2(Lead content)	-	300	-
5.2(Size)	-	0	-
5.3(Height)	-	0	-
5.4.2(Ergonomic feature)	-	0	-
5.4.3(Sole bond)	-	0	-
5.4.4(Slip resistance)	-	0	-
5.4.5(Leak proofness)	-	0	-
5.4.6.1(Toe caps General)	-	0	-
5.4.6.2(Internal length of toecaps)	-	0	-
5.4.6.3(Corrosion resistance)	-	0	-
5.4.6.4(Impact resistance)	-	0	-
5.4.6.5(Compression resistance)	-	0	-
5.4.7(Colour)	-	0	-
5.4.8.1(Conductive Footwear)	-	0	-
5.4.8.2(Antistatic Footwear)	-	0	-
5.4.8.3.2(Penetration resistance)	-	0	-
5.4.8.4(Cut resistance)	-	0	-
5.4.8.5(Outsole resistance to acid and alkali)	-	0	-
5.4.8.6(Outsole resistance to fuel oil)	-	0	-
5.5.1(Upper material)	-	0	-
5.5.1(Upper Thickness)	-	0	-
5.5.2(Upper tensile strength)	-	0	-
5.5.3(Upper flexing)	-	0	-
5.5.4(Upper Hardness)	-	0	-
5.5.5(Upper Cold flex resistance)	-	0	-
5.6.1(Lining material)	-	0	-
5.6.2(Lining Tear strength)	-	0	-
5.6.3(Lining abrasion)	-	0	-
5.6.4(Lining adhesion with upper)	-	0	-
5.7.1(Insole material)	-	0	-
5.7.2(Insole abrasion)	-	0	-
5.7.3(Water absorption and desorption)	-	0	-
5.8.2(Eyelets material)	-	0	-
5.8.2(Lace material)	-	0	-
5.8.2(Lace length)	-	0	-
5.8.2(Lace breaking load)	-	0	-
5.9.1(Insock material)	-	0	-
5.9.2(Inscok abrasion resistance)	-	0	-
5.9.3(Insock water absorption and desorption)	-	0	-
5.11.1(Outsole material)	-	0	-
5.11.1(Outsole thickness)	-	0	-
5.11.2(Outsole density)	-	0	-
5.11.3(Outsole Interlayer bond)	-	0	-
5.11.4(Outsole tear)	-	0	-
5.11.5(Outsole Abrasion)	-	0	-
5.11.6(Outsole hardness)	-	0	-
5.11.7(Outsole flexing)	-	0	-
5.11.8(Outsole cold flex resistance)	-	0	-
6.1(Volatility)	-	0	-
6.2(Lead content)	-	0	-
5.2(Size)	-	0	-
5.3(Height)	-	0	-
5.4.2(Ergonomic feature)	-	0	-
5.4.3(Sole bond)	-	0	-
5.4.4(Slip resistance)	-	0	-
5.4.5(Leak proofness)	-	0	-
5.4.6.1(Toe caps General)	-	0	-
5.4.6.2(Internal length of toecaps)	-	0	-
5.4.6.3(Corrosion resistance)	-	0	-
5.4.6.4(Impact resistance)	-	0	-
5.4.6.5(Compression resistance)	-	0	-
5.4.7(Colour)	-	0	-
5.4.8.1(Conductive Footwear)	-	0	-
5.4.8.2(Antistatic Footwear)	-	0	-
5.4.8.3.2(Penetration resistance)	-	0	-
5.4.8.4(Cut resistance)	-	0	-
5.4.8.5(Outsole resistance to acid and alkali)	-	0	-
5.4.8.6(Outsole resistance to fuel oil)	-	0	-
5.5.1(Upper material)	-	0	-
5.5.1(Upper Thickness)	-	0	-
5.5.2(Upper tensile strength)	-	0	-
5.5.3(Upper flexing)	-	0	-
5.5.4(Upper Hardness)	-	0	-
5.5.5(Upper Cold flex resistance)	-	0	-
5.6.1(Lining material)	-	0	-
5.6.2(Lining Tear strength)	-	0	-
5.6.3(Lining abrasion)	-	0	-
5.6.4(Lining adhesion with upper)	-	0	-
5.7.1(Insole material)	-	0	-
5.7.2(Insole abrasion)	-	0	-
5.7.3(Water absorption and desorption)	-	0	-
5.8.2(Eyelets material)	-	0	-
5.8.2(Lace material)	-	0	-
5.8.2(Lace length)	-	0	-
5.8.2(Lace breaking load)	-	0	-
5.9.1(Insock material)	-	0	-
5.9.2(Inscok abrasion resistance)	-	0	-
5.9.3(Insock water absorption and desorption)	-	0	-
5.11.1(Outsole material)	-	0	-
5.11.1(Outsole thickness)	-	0	-
5.11.2(Outsole density)	-	0	-
5.11.3(Outsole Interlayer bond)	-	0	-
5.11.4(Outsole tear)	-	0	-
5.11.5(Outsole Abrasion)	-	0	-
5.11.6(Outsole hardness)	-	0	-
5.11.7(Outsole flexing)	-	0	-
5.11.8(Outsole cold flex resistance)	-	0	-
6.1(Volatility)	-	0	-
6.2(Lead content)	-	0	-
5.2(Size)	-	0	-
5.3(Height)	-	0	-
5.4.2(Ergonomic feature)	-	0	-
5.4.3(Sole bond)	-	0	-
5.4.4(Slip resistance)	-	0	-
5.4.5(Leak proofness)	-	0	-
5.4.6.1(Toe caps General)	-	0	-
5.4.6.2(Internal length of toecaps)	-	0	-
5.4.6.3(Corrosion resistance)	-	0	-
5.4.6.4(Impact resistance)	-	0	-
5.4.6.5(Compression resistance)	-	0	-
5.4.7(Colour)	-	0	-
5.4.8.1(Conductive Footwear)	-	0	-
5.4.8.2(Antistatic Footwear)	-	0	-
5.4.8.3.2(Penetration resistance)	-	0	-
5.4.8.4(Cut resistance)	-	0	-
5.4.8.5(Outsole resistance to acid and alkali)	-	0	-
5.4.8.6(Outsole resistance to fuel oil)	-	0	-
5.5.1(Upper material)	-	0	-
5.5.1(Upper Thickness)	-	0	-
5.5.2(Upper tensile strength)	-	0	-
5.5.3(Upper flexing)	-	0	-
5.5.4(Upper Hardness)	-	0	-
5.5.5(Upper Cold flex resistance)	-	0	-
5.6.1(Lining material)	-	0	-
5.6.2(Lining Tear strength)	-	0	-
5.6.3(Lining abrasion)	-	0	-
5.6.4(Lining adhesion with upper)	-	0	-
5.7.1(Insole material)	-	0	-
5.7.2(Insole abrasion)	-	0	-
5.7.3(Water absorption and desorption)	-	0	-
5.8.2(Eyelets material)	-	0	-
5.8.2(Lace material)	-	0	-
5.8.2(Lace length)	-	0	-
5.8.2(Lace breaking load)	-	0	-
5.9.1(Insock material)	-	0	-
5.9.2(Inscok abrasion resistance)	-	0	-
5.9.3(Insock water absorption and desorption)	-	0	-
5.11.1(Outsole material)	-	0	-
5.11.1(Outsole thickness)	-	0	-
5.11.2(Outsole density)	-	0	-
5.11.3(Outsole Interlayer bond)	-	0	-
5.11.4(Outsole tear)	-	0	-
5.11.5(Outsole Abrasion)	-	0	-
5.11.6(Outsole hardness)	-	0	-
5.11.7(Outsole flexing)	-	0	-
5.11.8(Outsole cold flex resistance)	-	0	-
6.1(Volatility)	-	0	-
6.2(Lead content)	-	0	-
5.2(Size)	-	0	-
5.3(Height)	-	0	-
5.4.2(Ergonomic feature)	-	0	-
5.4.3(Sole bond)	-	0	-
5.4.4(Slip resistance)	-	0	-
5.4.5(Leak proofness)	-	0	-
5.4.6.1(Toe caps General)	-	0	-
5.4.6.2(Internal length of toecaps)	-	0	-
5.4.6.3(Corrosion resistance)	-	0	-
5.4.6.4(Impact resistance)	-	0	-
5.4.6.5(Compression resistance)	-	0	-
5.4.7(Colour)	-	0	-
5.4.8.1(Conductive Footwear)	-	0	-
5.4.8.2(Antistatic Footwear)	-	0	-
5.4.8.3.2(Penetration resistance)	-	0	-
5.4.8.4(Cut resistance)	-	0	-
5.4.8.5(Outsole resistance to acid and alkali)	-	0	-
5.4.8.6(Outsole resistance to fuel oil)	-	0	-
5.5.1(Upper material)	-	0	-
5.5.1(Upper Thickness)	-	0	-
5.5.2(Upper tensile strength)	-	0	-
5.5.3(Upper flexing)	-	0	-
5.5.4(Upper Hardness)	-	0	-
5.5.5(Upper Cold flex resistance)	-	0	-
5.6.1(Lining material)	-	0	-
5.6.2(Lining Tear strength)	-	0	-
5.6.3(Lining abrasion)	-	0	-
5.6.4(Lining adhesion with upper)	-	0	-
5.7.1(Insole material)	-	0	-
5.7.2(Insole abrasion)	-	0	-
5.7.3(Water absorption and desorption)	-	0	-
5.8.2(Eyelets material)	-	0	-
5.8.2(Lace material)	-	0	-
5.8.2(Lace length)	-	0	-
5.8.2(Lace breaking load)	-	0	-
5.9.1(Insock material)	-	0	-
5.9.2(Inscok abrasion resistance)	-	0	-
5.9.3(Insock water absorption and desorption)	-	0	-
5.11.1(Outsole material)	-	0	-
5.11.1(Outsole thickness)	-	0	-
5.11.2(Outsole density)	-	0	-
5.11.3(Outsole Interlayer bond)	-	0	-
5.11.4(Outsole tear)	-	0	-
5.11.5(Outsole Abrasion)	-	0	-
5.11.6(Outsole hardness)	-	0	-
5.11.7(Outsole flexing)	-	0	-
5.11.8(Outsole cold flex resistance)	-	0	-
6.1(Volatility)	-	0	-
6.2(Lead content)	-	0	-
Table 1 as per IS 17011 2018(pH)	-	300	-
Table 1 as per IS 17011 2018(Phthalates (each individual phthalate))	-	2000	-
Table 1 as per IS 17011 2018(Nickel, on skin contact)	-	1000	-
Table 1 as per IS 17011 2018(Allergenic and carcinogenic disperse dyes)	-	3000	-
Table 1 as per IS 17011 2018(Aromatic amines released from Azo dyes (each individual amine))	-	3000	-
Table 1 as per IS 17011 2018(Chromium (VI))	-	700	-
Table 1 as per IS 17011 2018(Dimethyl fumarate (DMFU))	-	1500	-
Table 1 as per IS 17011 2018(Formaldehyde (free or released by partial hydrolysis))	-	1000	-
Table 1 as per IS 17011 2018(Organotin compounds)	-	1500	-
Table 1 as per IS 17011 2018(PCP-TeCP-TriCP polychlorophenols)	-	1500	-
5.10(Closing Thread (If used))	-	600	-

21 Jul, 2028

-
Revised Version of IS 12254:2021. Included w.e.f. 07.03.2023

11872

Central Institute of Petrochemicals Engineering & Technology (CIPET), CSTS - Dehradun

9178004

IS 16352 (2020)

Geosynthetics – High density polyethylene (HDPE) geomembranes for lining – Specification (first revision)

98460.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5,3.1, Table1,x) Type I / II / III / IV / V / VI / VII IS 2530(Carbon black content)	-	925.00	-
5,3.1, Table1,iii) Type I / II / III / IV / V / VI / VII Method A of IS 13162 (Part 3)(Lowest individual of 10 thickness value)	-	750.00	-
5,3.1, Table1,xv) Type I / II / III / IV / V / VI / VII Annex J(Stress crack resistance)	-	1350.00	Testing Charge- 1100.00 SPECIMEN PREPARATION CHARGE- 250.00
5,3.1, Table1,iv) d) Type I / II / III / IV / V / VI / VII Annex B(Tensile properties: Breaking elongation)	-	2700.00	1. YIELD STRENGTH & ELONGATION - 1100.00 SPECIMEN PREPARATION CHARGE- 250.00 2. BREAKING STRENGTH & ELONGATION - 1100.00 SPECIMEN PREPARATION CHARGE- 250.00
5,3.1, Table1,xii) Type I / II / III / IV / V / VI / VII ISO 11357 (Part 6) or ASTM D 5885(Oxidative induction time (OIT) : a) Standard OIT or b) High pressure OIT)	-	4400.00	1. STANDARD OIT - 2200.00 2. HIGH PRESSURE OIT - 2200.00
5,3.1, Table1,xiii) Type I / II / III / IV / V / VI / VII Oven method of IS 7016 (Part 8), ISO 11357-6 and ASTM D 5885(Oven ageing at 85°C, Retention of oxidative induction time (OIT) after 90 days : a) Standard OIT or b) High pressure OIT)	-	4400.00	1. STANDARD OIT - 2200.00 2. HIGH PRESSURE OIT - 2200.00 3. CONDITIOING CHARGE- 54000.00
5,3.1, Table1,v) Type I / II / III / IV / V / VI / VII Annex C(Tear resistance)	-	1350.00	Testing Charge- 1100.00 SPECIMEN PREPARATION CHARGE- 250.00
5,3.1, Table1,vi) Type I / II / III / IV / V / VI / VII Annex D(Puncture resistanc)	-	1100.00	-
5,3.1, Table1,vii) Type I / II / III / IV / V / VI / VII Annex E(Low temperature crack resistance at minus 30°C±1°C)	-	1800.00	Testing Charge- 1300.00 SPECIMEN PREPARATION CHARGE- 500.00
5,3.1, Table1,viii) Type I / II / III / IV / V / VI / VII Annex F(Hydrostatic resistance)	-	1350.00	Testing Charge- 1100.00 SPECIMEN PREPARATION CHARGE- 250.00
5,3.1, Table1,ix) Type I / II / III / IV / V / VI / VII Annex G(Seam strength : 85 percent of the original actual fabric strength or unbreakable seam)	-	1350.00	Testing Charge- 1100.00 SPECIMEN PREPARATION CHARGE- 250.00
5,3.1, Table1,xi) Type I / II / III / IV / V / VI / VII IS 2530(Carbon black dispersion)	-	700.00	-
5,3.1, Table1,xiv) Type I / II / III / IV / V / VI / VII Annex H(Retention of breaking strength after UV exposure of 144 h : 85 percent of the original actual fabric strength)	-	9360.00	1. RETENTION OF BREAKING STRENGTH 1100.00 2. CONDITIOING CHARGE - 8260.00
6(DIMENSIONS AND TOLERANCES The dimensions of HDPE geomembrane when tested by the method given in IS 7016 (Part 1) shall be as agreed to between the buyer and the seller. However, the minimum width of the HDPE geomembrane shall be 5000 mm. A combination of panel width may be used to obtain desired width of geomembrane. Narrow width panels not less than 1000 mm in width may also be used but such pieces shall not exceed 1 piece per roll of finished material of specified width.)	-	250.00	-
7, 7.1 Annex M(COLOUR, SURFACE CHARACTERISTICS AND FREEDOM FROM DEFECTS: )	-	300.00	-
3, 3.1(MATERIAL AND MANUFACTURE)	-	4000.00	1. MATERIAL IDENTIFICATIN - 2000.00 2. PRESENCE OF UV STABLIZER - 2000.00
5,3.1, Table 2,xi) Type I / II / III / IV / V / VI IS 2530(Carbon black content)	-	0	-
5,3.1, Table2,iii) Type I / II / III / IV / V / VI Annex K(Lowest individual of 10 thickness value)	-	0	-
5,3.1, Table2,iv) Type I / II / III / IV / V / VI Annex L(Average asperity height)	-	0	-
5,3.1, Table 2,v) d) Type I / II / III / IV / V / VI Annex B(Tensile properties: Breaking elongation)	-	0	-
5,3.1, Table 2,xvi) Type I / II / III / IV / V / VI Annex J(Stress crack resistance)	-	0	-
5,3.1, Table 2,xiii) Type I / II / III / IV / V / VI ISO 11357 (Part 6) or ASTM D 5885(Oxidative induction time (OIT) : a) Standard OIT or b) High pressure OIT)	-	0	-
5,3.1, Table 2,xiv) Type I / II / III / IV / V / VI Oven method of IS 7016 (Part 8), ISO 11357-6 and ASTM D 5885(Oven ageing at 85°C, Retention of oxidative induction time (OIT) after 90 days : a) Standard OIT or b) High pressure OIT)	-	0	-
3, 3.1(MATERIAL AND MANUFACTURE)	-	0	-
3, 3.2(MATERIAL AND MANUFACTURE If two or more pieces of geomembranes are used, the material shall be joined together by a suitable heat sealing process keeping an overlap of at least 2.5 cm. )	-	0	-
4, 4.1(VARIETY AND TYPES : Based on the finish, HDPE geomembrane shall be of following varieties)	-	0	-
4.2,4.2.1(Based on the thickness of HDPE geomembrane, the material shall be classified as under)	-	0	-
4.2,4.2.2(Based on the thickness of HDPE geomembrane, the material shall be classified as under)	-	0	-
5(REQUIREMENTS)	-	0	-
5,3.1, Table 1(Requirements of Smooth HDPE Geomembrane)	-	0	-
5,3.1, Table1,i) a) Type I / II / III / IV / V / VI / VII IS 7016 (Part 1)(Length)	-	0	-
5,3.1, Table1,i) b) Type I / II / III / IV / V / VI / VII IS 7016 (Part 1)(width)	-	0	-
5,3.1, Table1,ii) Type I / II / III / IV / V / VI / VII Method A of IS 13162 (Part 3)(Average thickness at a pressure of 2 ± 0.01 kPa)	-	0	-
5,3.1, Table1,iv) a) Type I / II / III / IV / V / VI / VII Annex B(Tensile properties: Yield strength,)	-	0	-
5,3.1, Table1,iv) b) Type I / II / III / IV / V / VI / VII Annex B(Tensile properties: Breaking strength,)	-	0	-
5,3.1, Table1,iv) c) Type I / II / III / IV / V / VI / VII Annex B(Tensile properties: Yield elongation)	-	0	-
5,3.1, Table1,xiv) Type I / II / III / IV / V / VI / VII Annex H(Retention of breaking strength after UV exposure of 144 h : 85 percent of the original actual fabric strength)	-	0	-
5,3.1, Table 2(Requirements of Textured (Single or Double Sided) HDPE Geomembrane)	-	0	-
5,3.1, Table2,i) a) Type I / II / III / IV / V / VI IS 7016 (Part 1)(Length)	-	0	-
5,3.1, Table 2,i) b) Type I / II / III / IV / V / VI IS 7016 (Part 1)(width)	-	0	-
5,3.1, Table2,ii) Type I / II / III / IV / V / VI Annex K(Average core thickness)	-	0	-
5,3.1, Table 2,v) a) Type I / II / III / IV / V / VI Annex B(Tensile properties: Yield strength,)	-	0	-
5,3.1, Table 2,v) b) Type I / II / III / IV / V / VI Annex B(Tensile properties: Breaking strength,)	-	0	-
5,3.1, Table 2,v) c) Type I / II / III / IV / V / VI Annex B(Tensile properties: Yield elongation)	-	0	-
5,3.1, Table 2,vi) a) Type I / II / III / IV / V / VI Annex C(Tear resistance)	-	0	-
5,3.1, Table 2,vii) Type I / II / III / IV / V / VI Annex D(Puncture resistanc)	-	0	-
5,3.1, Table 2,viii) Type I / II / III / IV / V / VI Annex E(Low temperature crack resistance at minus 30°C±1°C)	-	0	-
5,3.1, Table 2,iX) Type I / II / III / IV / V / VI Annex F(Hydrostatic resistance)	-	0	-
5,3.1, Table 2,x) Type I / II / III / IV / V / VI Annex G(Seam strength : 85 percent of the original actual fabric strength or unbreakable seam)	-	0	-
5,3.1, Table 2,xii) Type I / II / III / IV / V / VI IS 2530(Carbon black dispersion)	-	0	-
5,3.1, Table 2,xv) Type I / II / III / IV / V / VI Annex H(Retention of breaking strength after UV exposure of 144 h : 85 percent of the original actual fabric strength)	-	0	-
6(DIMENSIONS AND TOLERANCES The dimensions of HDPE geomembrane when tested by the method given in IS 7016 (Part 1) shall be as agreed to between the buyer and the seller. However, the minimum width of the HDPE geomembrane shall be 5000 mm. A combination of panel width may be used to obtain desired width of geomembrane. Narrow width panels not less than 1000 mm in width may also be used but such pieces shall not exceed 1 piece per roll of finished material of specified width.)	-	0	-
7, 7.2(COLOUR, SURFACE CHARACTERISTICS AND FREEDOM FROM DEFECTS)	-	0	-
5,3.1, Table1,x) Type I / II / III / IV / V / VI / VII IS 2530(Carbon black content)	-	0	-
5,3.1, Table 2,xi) Type I / II / III / IV / V / VI IS 2530(Carbon black content)	-	0	-
5,3.1, Table2,iii) Type I / II / III / IV / V / VI Annex K(Lowest individual of 10 thickness value)	-	0	-
5,3.1, Table1,iii) Type I / II / III / IV / V / VI / VII Method A of IS 13162 (Part 3)(Lowest individual of 10 thickness value)	-	0	-
5,3.1, Table2,iv) Type I / II / III / IV / V / VI Annex L(Average asperity height)	-	0	-
5,3.1, Table 2,v) d) Type I / II / III / IV / V / VI Annex B(Tensile properties: Breaking elongation)	-	0	-
5,3.1, Table1,xv) Type I / II / III / IV / V / VI / VII Annex J(Stress crack resistance)	-	0	-
5,3.1, Table 2,xvi) Type I / II / III / IV / V / VI Annex J(Stress crack resistance)	-	0	-
5,3.1, Table1,iv) d) Type I / II / III / IV / V / VI / VII Annex B(Tensile properties: Breaking elongation)	-	0	-
5,3.1, Table1,xii) Type I / II / III / IV / V / VI / VII ISO 11357 (Part 6) or ASTM D 5885(Oxidative induction time (OIT) : a) Standard OIT or b) High pressure OIT)	-	0	-
5,3.1, Table 2,xiii) Type I / II / III / IV / V / VI ISO 11357 (Part 6) or ASTM D 5885(Oxidative induction time (OIT) : a) Standard OIT or b) High pressure OIT)	-	0	-
5,3.1, Table1,xiii) Type I / II / III / IV / V / VI / VII Oven method of IS 7016 (Part 8), ISO 11357-6 and ASTM D 5885(Oven ageing at 85°C, Retention of oxidative induction time (OIT) after 90 days : a) Standard OIT or b) High pressure OIT)	-	0	-
5,3.1, Table 2,xiv) Type I / II / III / IV / V / VI Oven method of IS 7016 (Part 8), ISO 11357-6 and ASTM D 5885(Oven ageing at 85°C, Retention of oxidative induction time (OIT) after 90 days : a) Standard OIT or b) High pressure OIT)	-	0	-
3, 3.1(MATERIAL AND MANUFACTURE)	-	0	-
3, 3.2(MATERIAL AND MANUFACTURE If two or more pieces of geomembranes are used, the material shall be joined together by a suitable heat sealing process keeping an overlap of at least 2.5 cm. )	-	0	-
4, 4.1(VARIETY AND TYPES : Based on the finish, HDPE geomembrane shall be of following varieties)	-	0	-
4.2,4.2.1(Based on the thickness of HDPE geomembrane, the material shall be classified as under)	-	0	-
4.2,4.2.2(Based on the thickness of HDPE geomembrane, the material shall be classified as under)	-	0	-
5(REQUIREMENTS)	-	0	-
5,3.1, Table 1(Requirements of Smooth HDPE Geomembrane)	-	0	-
5,3.1, Table1,i) a) Type I / II / III / IV / V / VI / VII IS 7016 (Part 1)(Length)	-	0	-
5,3.1, Table1,i) b) Type I / II / III / IV / V / VI / VII IS 7016 (Part 1)(width)	-	0	-
5,3.1, Table1,ii) Type I / II / III / IV / V / VI / VII Method A of IS 13162 (Part 3)(Average thickness at a pressure of 2 ± 0.01 kPa)	-	0	-
5,3.1, Table1,iv) a) Type I / II / III / IV / V / VI / VII Annex B(Tensile properties: Yield strength,)	-	0	-
5,3.1, Table1,iv) b) Type I / II / III / IV / V / VI / VII Annex B(Tensile properties: Breaking strength,)	-	0	-
5,3.1, Table1,iv) c) Type I / II / III / IV / V / VI / VII Annex B(Tensile properties: Yield elongation)	-	0	-
5,3.1, Table1,v) Type I / II / III / IV / V / VI / VII Annex C(Tear resistance)	-	0	-
5,3.1, Table1,vi) Type I / II / III / IV / V / VI / VII Annex D(Puncture resistanc)	-	0	-
5,3.1, Table1,vii) Type I / II / III / IV / V / VI / VII Annex E(Low temperature crack resistance at minus 30°C±1°C)	-	0	-
5,3.1, Table1,viii) Type I / II / III / IV / V / VI / VII Annex F(Hydrostatic resistance)	-	0	-
5,3.1, Table1,ix) Type I / II / III / IV / V / VI / VII Annex G(Seam strength : 85 percent of the original actual fabric strength or unbreakable seam)	-	0	-
5,3.1, Table1,xi) Type I / II / III / IV / V / VI / VII IS 2530(Carbon black dispersion)	-	0	-
5,3.1, Table 2(Requirements of Textured (Single or Double Sided) HDPE Geomembrane)	-	0	-
5,3.1, Table2,i) a) Type I / II / III / IV / V / VI IS 7016 (Part 1)(Length)	-	0	-
5,3.1, Table 2,i) b) Type I / II / III / IV / V / VI IS 7016 (Part 1)(width)	-	0	-
5,3.1, Table2,ii) Type I / II / III / IV / V / VI Annex K(Average core thickness)	-	0	-
5,3.1, Table 2,v) a) Type I / II / III / IV / V / VI Annex B(Tensile properties: Yield strength,)	-	0	-
5,3.1, Table 2,v) b) Type I / II / III / IV / V / VI Annex B(Tensile properties: Breaking strength,)	-	0	-
5,3.1, Table 2,v) c) Type I / II / III / IV / V / VI Annex B(Tensile properties: Yield elongation)	-	0	-
5,3.1, Table 2,vi) a) Type I / II / III / IV / V / VI Annex C(Tear resistance)	-	0	-
5,3.1, Table 2,vii) Type I / II / III / IV / V / VI Annex D(Puncture resistanc)	-	0	-
5,3.1, Table 2,viii) Type I / II / III / IV / V / VI Annex E(Low temperature crack resistance at minus 30°C±1°C)	-	0	-
5,3.1, Table 2,iX) Type I / II / III / IV / V / VI Annex F(Hydrostatic resistance)	-	0	-
5,3.1, Table 2,x) Type I / II / III / IV / V / VI Annex G(Seam strength : 85 percent of the original actual fabric strength or unbreakable seam)	-	0	-
5,3.1, Table 2,xii) Type I / II / III / IV / V / VI IS 2530(Carbon black dispersion)	-	0	-
5,3.1, Table 2,xv) Type I / II / III / IV / V / VI Annex H(Retention of breaking strength after UV exposure of 144 h : 85 percent of the original actual fabric strength)	-	0	-
7, 7.1 Annex M(COLOUR, SURFACE CHARACTERISTICS AND FREEDOM FROM DEFECTS: )	-	0	-
7, 7.2(COLOUR, SURFACE CHARACTERISTICS AND FREEDOM FROM DEFECTS)	-	0	-
5,3.1, Table1,x) Type I / II / III / IV / V / VI / VII IS 2530(Carbon black content)	-	0	-
5,3.1, Table 2,xi) Type I / II / III / IV / V / VI IS 2530(Carbon black content)	-	0	-
5,3.1, Table2,iii) Type I / II / III / IV / V / VI Annex K(Lowest individual of 10 thickness value)	-	0	-
5,3.1, Table1,iii) Type I / II / III / IV / V / VI / VII Method A of IS 13162 (Part 3)(Lowest individual of 10 thickness value)	-	0	-
5,3.1, Table2,iv) Type I / II / III / IV / V / VI Annex L(Average asperity height)	-	0	-
5,3.1, Table 2,v) d) Type I / II / III / IV / V / VI Annex B(Tensile properties: Breaking elongation)	-	0	-
5,3.1, Table1,xv) Type I / II / III / IV / V / VI / VII Annex J(Stress crack resistance)	-	0	-
5,3.1, Table 2,xvi) Type I / II / III / IV / V / VI Annex J(Stress crack resistance)	-	0	-
5,3.1, Table1,iv) d) Type I / II / III / IV / V / VI / VII Annex B(Tensile properties: Breaking elongation)	-	0	-
5,3.1, Table1,xii) Type I / II / III / IV / V / VI / VII ISO 11357 (Part 6) or ASTM D 5885(Oxidative induction time (OIT) : a) Standard OIT or b) High pressure OIT)	-	0	-
5,3.1, Table 2,xiii) Type I / II / III / IV / V / VI ISO 11357 (Part 6) or ASTM D 5885(Oxidative induction time (OIT) : a) Standard OIT or b) High pressure OIT)	-	0	-
5,3.1, Table1,xiii) Type I / II / III / IV / V / VI / VII Oven method of IS 7016 (Part 8), ISO 11357-6 and ASTM D 5885(Oven ageing at 85°C, Retention of oxidative induction time (OIT) after 90 days : a) Standard OIT or b) High pressure OIT)	-	0	-
5,3.1, Table 2,xiv) Type I / II / III / IV / V / VI Oven method of IS 7016 (Part 8), ISO 11357-6 and ASTM D 5885(Oven ageing at 85°C, Retention of oxidative induction time (OIT) after 90 days : a) Standard OIT or b) High pressure OIT)	-	0	-
3, 3.2(MATERIAL AND MANUFACTURE If two or more pieces of geomembranes are used, the material shall be joined together by a suitable heat sealing process keeping an overlap of at least 2.5 cm. )	-	0	-
4, 4.1(VARIETY AND TYPES : Based on the finish, HDPE geomembrane shall be of following varieties)	-	0	-
4.2,4.2.1(Based on the thickness of HDPE geomembrane, the material shall be classified as under)	-	0	-
4.2,4.2.2(Based on the thickness of HDPE geomembrane, the material shall be classified as under)	-	0	-
5(REQUIREMENTS)	-	0	-
5,3.1, Table 1(Requirements of Smooth HDPE Geomembrane)	-	0	-
5,3.1, Table1,i) a) Type I / II / III / IV / V / VI / VII IS 7016 (Part 1)(Length)	-	0	-
5,3.1, Table1,i) b) Type I / II / III / IV / V / VI / VII IS 7016 (Part 1)(width)	-	0	-
5,3.1, Table1,ii) Type I / II / III / IV / V / VI / VII Method A of IS 13162 (Part 3)(Average thickness at a pressure of 2 ± 0.01 kPa)	-	0	-
5,3.1, Table1,iv) a) Type I / II / III / IV / V / VI / VII Annex B(Tensile properties: Yield strength,)	-	0	-
5,3.1, Table1,iv) b) Type I / II / III / IV / V / VI / VII Annex B(Tensile properties: Breaking strength,)	-	0	-
5,3.1, Table1,iv) c) Type I / II / III / IV / V / VI / VII Annex B(Tensile properties: Yield elongation)	-	0	-
5,3.1, Table1,v) Type I / II / III / IV / V / VI / VII Annex C(Tear resistance)	-	0	-
5,3.1, Table1,vi) Type I / II / III / IV / V / VI / VII Annex D(Puncture resistanc)	-	0	-
5,3.1, Table1,vii) Type I / II / III / IV / V / VI / VII Annex E(Low temperature crack resistance at minus 30°C±1°C)	-	0	-
5,3.1, Table1,viii) Type I / II / III / IV / V / VI / VII Annex F(Hydrostatic resistance)	-	0	-
5,3.1, Table1,ix) Type I / II / III / IV / V / VI / VII Annex G(Seam strength : 85 percent of the original actual fabric strength or unbreakable seam)	-	0	-
5,3.1, Table1,xi) Type I / II / III / IV / V / VI / VII IS 2530(Carbon black dispersion)	-	0	-
5,3.1, Table1,xiv) Type I / II / III / IV / V / VI / VII Annex H(Retention of breaking strength after UV exposure of 144 h : 85 percent of the original actual fabric strength)	-	0	-
5,3.1, Table 2(Requirements of Textured (Single or Double Sided) HDPE Geomembrane)	-	0	-
5,3.1, Table2,i) a) Type I / II / III / IV / V / VI IS 7016 (Part 1)(Length)	-	0	-
5,3.1, Table 2,i) b) Type I / II / III / IV / V / VI IS 7016 (Part 1)(width)	-	0	-
5,3.1, Table2,ii) Type I / II / III / IV / V / VI Annex K(Average core thickness)	-	0	-
5,3.1, Table 2,v) a) Type I / II / III / IV / V / VI Annex B(Tensile properties: Yield strength,)	-	0	-
5,3.1, Table 2,v) b) Type I / II / III / IV / V / VI Annex B(Tensile properties: Breaking strength,)	-	0	-
5,3.1, Table 2,v) c) Type I / II / III / IV / V / VI Annex B(Tensile properties: Yield elongation)	-	0	-
5,3.1, Table 2,vi) a) Type I / II / III / IV / V / VI Annex C(Tear resistance)	-	0	-
5,3.1, Table 2,vii) Type I / II / III / IV / V / VI Annex D(Puncture resistanc)	-	0	-
5,3.1, Table 2,viii) Type I / II / III / IV / V / VI Annex E(Low temperature crack resistance at minus 30°C±1°C)	-	0	-
5,3.1, Table 2,iX) Type I / II / III / IV / V / VI Annex F(Hydrostatic resistance)	-	0	-
5,3.1, Table 2,x) Type I / II / III / IV / V / VI Annex G(Seam strength : 85 percent of the original actual fabric strength or unbreakable seam)	-	0.00	-
5,3.1, Table 2,xii) Type I / II / III / IV / V / VI IS 2530(Carbon black dispersion)	-	0.00	-
5,3.1, Table 2,xv) Type I / II / III / IV / V / VI Annex H(Retention of breaking strength after UV exposure of 144 h : 85 percent of the original actual fabric strength)	-	0.00	-
6(DIMENSIONS AND TOLERANCES The dimensions of HDPE geomembrane when tested by the method given in IS 7016 (Part 1) shall be as agreed to between the buyer and the seller. However, the minimum width of the HDPE geomembrane shall be 5000 mm. A combination of panel width may be used to obtain desired width of geomembrane. Narrow width panels not less than 1000 mm in width may also be used but such pieces shall not exceed 1 piece per roll of finished material of specified width.)	-	0.00	-
7, 7.1 Annex M(COLOUR, SURFACE CHARACTERISTICS AND FREEDOM FROM DEFECTS: )	-	0.00	-
7, 7.2(COLOUR, SURFACE CHARACTERISTICS AND FREEDOM FROM DEFECTS)	-	0.00	-
5,3.1, Table1,x) Type I / II / III / IV / V / VI / VII IS 2530(Carbon black content)	-	0.00	-
5,3.1, Table 2,xi) Type I / II / III / IV / V / VI IS 2530(Carbon black content)	-	0.00	-
5,3.1, Table2,iii) Type I / II / III / IV / V / VI Annex K(Lowest individual of 10 thickness value)	-	0.00	-
5,3.1, Table1,iii) Type I / II / III / IV / V / VI / VII Method A of IS 13162 (Part 3)(Lowest individual of 10 thickness value)	-	0.00	-
5,3.1, Table2,iv) Type I / II / III / IV / V / VI Annex L(Average asperity height)	-	0.00	-
5,3.1, Table 2,v) d) Type I / II / III / IV / V / VI Annex B(Tensile properties: Breaking elongation)	-	0.00	-
5,3.1, Table1,xv) Type I / II / III / IV / V / VI / VII Annex J(Stress crack resistance)	-	0.00	-
5,3.1, Table 2,xvi) Type I / II / III / IV / V / VI Annex J(Stress crack resistance)	-	0.00	-
5,3.1, Table1,iv) d) Type I / II / III / IV / V / VI / VII Annex B(Tensile properties: Breaking elongation)	-	0.00	-
5,3.1, Table1,xii) Type I / II / III / IV / V / VI / VII ISO 11357 (Part 6) or ASTM D 5885(Oxidative induction time (OIT) : a) Standard OIT or b) High pressure OIT)	-	0.00	-
5,3.1, Table 2,xiii) Type I / II / III / IV / V / VI ISO 11357 (Part 6) or ASTM D 5885(Oxidative induction time (OIT) : a) Standard OIT or b) High pressure OIT)	-	0.00	-
5,3.1, Table1,xiii) Type I / II / III / IV / V / VI / VII Oven method of IS 7016 (Part 8), ISO 11357-6 and ASTM D 5885(Oven ageing at 85°C, Retention of oxidative induction time (OIT) after 90 days : a) Standard OIT or b) High pressure OIT)	-	0.00	-
5,3.1, Table 2,xiv) Type I / II / III / IV / V / VI Oven method of IS 7016 (Part 8), ISO 11357-6 and ASTM D 5885(Oven ageing at 85°C, Retention of oxidative induction time (OIT) after 90 days : a) Standard OIT or b) High pressure OIT)	-	0.00	-
3, 3.1(MATERIAL AND MANUFACTURE)	-	0.00	-
3, 3.2(MATERIAL AND MANUFACTURE If two or more pieces of geomembranes are used, the material shall be joined together by a suitable heat sealing process keeping an overlap of at least 2.5 cm. )	-	0.00	-
4, 4.1(VARIETY AND TYPES : Based on the finish, HDPE geomembrane shall be of following varieties)	-	0.00	-
4.2,4.2.1(Based on the thickness of HDPE geomembrane, the material shall be classified as under)	-	0.00	-
4.2,4.2.2(Based on the thickness of HDPE geomembrane, the material shall be classified as under)	-	0.00	-
5(REQUIREMENTS)	-	0.00	-
5,3.1, Table 1(Requirements of Smooth HDPE Geomembrane)	-	0.00	-
5,3.1, Table1,i) a) Type I / II / III / IV / V / VI / VII IS 7016 (Part 1)(Length)	-	0.00	-
5,3.1, Table1,ii) Type I / II / III / IV / V / VI / VII Method A of IS 13162 (Part 3)(Average thickness at a pressure of 2 ± 0.01 kPa)	-	0.00	-
5,3.1, Table1,iv) a) Type I / II / III / IV / V / VI / VII Annex B(Tensile properties: Yield strength,)	-	0.00	-
5,3.1, Table1,iv) b) Type I / II / III / IV / V / VI / VII Annex B(Tensile properties: Breaking strength,)	-	0.00	-
5,3.1, Table1,iv) c) Type I / II / III / IV / V / VI / VII Annex B(Tensile properties: Yield elongation)	-	0.00	-
5,3.1, Table1,v) Type I / II / III / IV / V / VI / VII Annex C(Tear resistance)	-	0.00	-
5,3.1, Table1,vi) Type I / II / III / IV / V / VI / VII Annex D(Puncture resistanc)	-	0.00	-
5,3.1, Table1,vii) Type I / II / III / IV / V / VI / VII Annex E(Low temperature crack resistance at minus 30°C±1°C)	-	0.00	-
5,3.1, Table1,viii) Type I / II / III / IV / V / VI / VII Annex F(Hydrostatic resistance)	-	0.00	-
5,3.1, Table1,ix) Type I / II / III / IV / V / VI / VII Annex G(Seam strength : 85 percent of the original actual fabric strength or unbreakable seam)	-	0.00	-
5,3.1, Table1,xi) Type I / II / III / IV / V / VI / VII IS 2530(Carbon black dispersion)	-	0.00	-
5,3.1, Table1,xiv) Type I / II / III / IV / V / VI / VII Annex H(Retention of breaking strength after UV exposure of 144 h : 85 percent of the original actual fabric strength)	-	0.00	-
5,3.1, Table 2(Requirements of Textured (Single or Double Sided) HDPE Geomembrane)	-	0.00	-
5,3.1, Table2,i) a) Type I / II / III / IV / V / VI IS 7016 (Part 1)(Length)	-	0.00	-
5,3.1, Table 2,i) b) Type I / II / III / IV / V / VI IS 7016 (Part 1)(width)	-	0.00	-
5,3.1, Table2,ii) Type I / II / III / IV / V / VI Annex K(Average core thickness)	-	0.00	-
5,3.1, Table 2,v) a) Type I / II / III / IV / V / VI Annex B(Tensile properties: Yield strength,)	-	0.00	-
5,3.1, Table 2,v) b) Type I / II / III / IV / V / VI Annex B(Tensile properties: Breaking strength,)	-	0.00	-
5,3.1, Table 2,v) c) Type I / II / III / IV / V / VI Annex B(Tensile properties: Yield elongation)	-	0.00	-
5,3.1, Table 2,vi) a) Type I / II / III / IV / V / VI Annex C(Tear resistance)	-	0.00	-
5,3.1, Table 2,vii) Type I / II / III / IV / V / VI Annex D(Puncture resistanc)	-	0.00	-
5,3.1, Table 2,viii) Type I / II / III / IV / V / VI Annex E(Low temperature crack resistance at minus 30°C±1°C)	-	0.00	-
5,3.1, Table 2,iX) Type I / II / III / IV / V / VI Annex F(Hydrostatic resistance)	-	0.00	-
5,3.1, Table 2,x) Type I / II / III / IV / V / VI Annex G(Seam strength : 85 percent of the original actual fabric strength or unbreakable seam)	-	0.00	-
5,3.1, Table 2,xii) Type I / II / III / IV / V / VI IS 2530(Carbon black dispersion)	-	0.00	-
5,3.1, Table 2,xv) Type I / II / III / IV / V / VI Annex H(Retention of breaking strength after UV exposure of 144 h : 85 percent of the original actual fabric strength)	-	0.00	-
6(DIMENSIONS AND TOLERANCES The dimensions of HDPE geomembrane when tested by the method given in IS 7016 (Part 1) shall be as agreed to between the buyer and the seller. However, the minimum width of the HDPE geomembrane shall be 5000 mm. A combination of panel width may be used to obtain desired width of geomembrane. Narrow width panels not less than 1000 mm in width may also be used but such pieces shall not exceed 1 piece per roll of finished material of specified width.)	-	0.00	-
7, 7.1 Annex M(COLOUR, SURFACE CHARACTERISTICS AND FREEDOM FROM DEFECTS: )	-	0.00	-
7, 7.2(COLOUR, SURFACE CHARACTERISTICS AND FREEDOM FROM DEFECTS)	-	0.00	-
5,3.1, Table1,i) b) Type I / II / III / IV / V / VI / VII IS 7016 (Part 1)(width)	-	0.00	-

24 Apr, 2027

-
-

11873

Stellar Test House, Noida

8171606

IS 15885 : Part 2 : Sec 13 (2012)

Safety of lamp controlgear: Part 2 particular requirements: Sec 13 d.c. or a.c. supplied electronic controlgear for led modules

40000 View breakup
Rs. 40000/- (10% discount to BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	1000	-
8(Protection against accidental contact with live parts)	-	2000	-
9(Terminals)	-	2500	-
11(MOISTURE RESISTANCE AND INSULATION)	-	3000	-
12(Electric Strength)	-	3000	-
14(Fault conditions)	-	3000	-
15(Transformer heating)	-	3000	-
16(Construction)	-	4000	-
17(Creepage distance and clearances)	-	4000	-
18(Screws, current carrying parts and connections)	-	2500	-
19(Resistance to heat, fire and tracking)	-	5000	-
20(Resistance to corrosion)	-	5000	-

26 Sep, 2028

-
Included w.e.f. 19.12.2023 Up to 300V AC, 50 Hz. Exclusion: Components: Enclosure, Bridging resistor in primary circuit, capacitor and RC units, RF suppression (X-Y capacitors), Inductor, MOV/VDR, SMPS/Mains Transformer, PCB for LED, Transparaent cover, Bobbin, Insulated tape, heat shrinkage sleeve, Connector, Fuse, Ointernal Wire, LED, Optocoupler, EMI/EMC filter, winding wire, thin sheet materials (Cl.16,19)

11874

Regional Reference Standards Laboratory, Bangalore

6133034

IS 9281 : Part 3 (1981)

Specification for electronic weighing systems: Part 3 requirements

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 Table 1 Sl. No.11(Accuracy - IS : 9281 ( Part II )-1979)	-	25000		-

-
-

11875

Stellar Test House, Noida

8171606

IS 1237 (2012)

Cement Concrete Flooring Tiles - Specification

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 7.1(Length, Breadth, Minimum thickness, Difference in length of side between the longest side and shorterst side, Half tiles, Difference in Thickness between the thickest and thinnest tile, Thickness of wearing layer)	-	500	-
Cl 12.3(The Maximum gap between the arms of the square and the edge of the title shall notexceed 2 percent of the length.)	-	700	-
Cl 12.5(Water absorption)	-	1500	-
Cl 12.6(Wet transverse strength )	-	2000	-
Cl 12.7(Resistance to wear)	-	2000	-
Cl 11(Suface Finish)	-	500	-
Cl 12.4(Shall not exceed 1 percent of the length of the edge.)	-	500	-
Cl 12.2(Concavity & Convexity )	-	500	-

26 Sep, 2028

-
Included w.e.f. 28.03.2024

11876

Central Institute of Petrochemicals Engineering & Technology (CIPET), CSTS - Dehradun

9178004

IS 4985 (2021)

UNPLASTICIZED PVC PIPES FOR POTABLE WATER SUPPLIES SPECIFICATION Fourth Revision

28100.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.2.1.1 Table3(Angle of taper (Note-1))	-	500.00	TOTAL DIMENSION HAVE SINGLE CHARGE- 500.00
Cl-7.1(Mean out side Diameter (For less than or equal to 40 mm- Average of 8 , For higher diameters up to 110 mm average of 6))	-	0.00	TOTAL DIMENSION HAVE SINGLE CHARGE- 500.00
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Minimum))	-	0.00	TOTAL DIMENSION HAVE SINGLE CHARGE- 500.00
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Mamimum))	-	0.00	TOTAL DIMENSION HAVE SINGLE CHARGE- 500.00
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Minimum))	-	0.00	TOTAL DIMENSION HAVE SINGLE CHARGE- 500.00
7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Maximum))	-	0.00	TOTAL DIMENSION HAVE SINGLE CHARGE- 500.00
7.1.1.2(DIMENSIONS-PIPE-Ovality (Maximum))	-	0.00	TOTAL DIMENSION HAVE SINGLE CHARGE- 500.00
7.1.2.1(DIMENSIONS-PIPE-Thickness(Minimum))	-	0.00	TOTAL DIMENSION HAVE SINGLE CHARGE- 500.00
7.1.2.1(DIMENSIONS-PIPE-Thickness(Maximum))	-	0.00	TOTAL DIMENSION HAVE SINGLE CHARGE- 500.00
7.1.2.1(DIMENSIONS-PIPE-Average Thickness)	-	0.00	TOTAL DIMENSION HAVE SINGLE CHARGE- 500.00
Cl- 7.2(Socket length (Take 4 reading & minimum will be reported))	-	0.00	TOTAL DIMENSION HAVE SINGLE CHARGE- 500.00
8(SEALING RINGS)	-	500.00	-
9.1(PIPE ENDS)	-	0.00	-
10.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	500.00	-
10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity)	-	700.00	-
10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test)	-	1200.00	Testing Charge-700.00 SPECIMEN PREPARATION CHARGE- 500.00
10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature)	-	1100.00	-
10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density)	-	700.00	-
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test))	-	11000.00	-
11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test))	-	850.00	-
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)-for Integral Sealing Ring Sockets)	-	11000.00	-
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Integral Sealing Ring Sockets)	-	850.00	-
11.2(Resistance to External Blows at 0°C)	-	1500.00	Test Charges 1000 Specimen Preparation Charges 500
10.3(Effect on Water Test)	-	3000.00	-
6.1.2(PVC Resin)	-	1100.00	Applicable on Raw material (Optional) K-VALUE- 1100.00
6.1.1(VCM Content)	-	3000.00	Applicable on Raw material (Optional)
10.7(Sulphated Ash Content)	-	1200.00	-
10.1(Colour)	-	500.00	-
10.1(Surface Finish)	-	0.00	-
5(CLASSIFICATION OF PIPES)	-	0.00	-
7.1.1.1(DIMENSIONS-PIPE-Mean O.D. Variation)	-	0.00	Test Charges for above parameter has been already taken above.
7.2.1(DIMENSIONS-Socket)	-	0.00	Test Charges for above parameter has been already taken above.
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Minimum Length)	-	0.00	Test Charges for above parameter has been already taken above.
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Minimum))	-	0.00	Test Charges for above parameter has been already taken above.
7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Maximum))	-	0.00	Test Charges for above parameter has been already taken above.
7.2.1.2(a)-Table 5(DIMENSIONS-Sockets for elastomeric sealing ring joints-Minimum depth of engagement)	-	0.00	Test Charges for above parameter has been already taken above.
7.2.1.2-Table 4(DIMENSIONS-Sockets for elastomeric sealing ring joints-Socket inner Diameter)	-	0.00	Test Charges for above parameter has been already taken above.
10.1.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	0.00	Test Charges for above parameter has been already taken above.
11.1.1(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Plumbing pipes)	-	0.00	Test Charges for above parameter has been already taken above.
7.1.3(mean outside diameter, outside diameter at any point, and wall thickness of plumbing pipes)	-	0.00	Test Charges for above parameter has been already taken above.
7.1.4(Length)	-	0.00	Test Charges for above parameter has been already taken above.
7.2.1.2b(Maximum inner diameter of groove)	-	0.00	Test Charges for above parameter has been already taken above.
13.1(Marking)	-	0.00	-

24 Apr, 2027

-
Exclusion: Cl 6.1.1 (VCM Content)

11877

Ace Test Labs & Metrology Pvt. Ltd., Sonipat

9162826

IS 4250 (1980)

Specification for domestic electric food - Mixers (Liquidizers And Grinders) (First Revision)

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification- IS 302-1 )	-	2000	-
6(Classification- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.2(Marking)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.4(Marking)	-	2000	-
7.5(Marking)	-	2000	-
7.6(Marking)	-	2000	-
8( Protection Against Electric Shock, IS 302-1)	-	2000	-
9(Starting, IS 302-1)	-	5000	-
10(Power Input and Current, IS 302-1)	-	5000	-
11(Heating, IS 302-1)	-	5000	-
11(Heating, IS 302-1)	-	5000	-
11(Heating, IS 302-1)	-	5000	-
11(Heating, IS 302-1)	-	5000	-
11(Heating, IS 302-1)	-	5000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	5000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	5000	-
14(Transient Over Voltages, IS 302-1)	-	5000	-
15(Moisture Resistance, IS 302-1)	-	10000	-
15.1(Moisture Resistance, IS 302-1)	-	10000	-
15.2(Moisture Resistance-Spillage test)	-	10000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	5000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	5000	-
19(Abnormal Operation, IS 302-1)	-	5000	-
19(Abnormal Operation, IS 302-1)	-	5000	-
19(Abnormal Operation, IS 302-1)	-	5000	-
19(Abnormal Operation, IS 302-1)	-	5000	-
20(Stability & Mechanical Hazards, IS 302-1)	-	5000	-
20(Stability & Mechanical Hazards, IS 302-1)	-	5000	-
21(Mechanical Strength, IS 302-1)	-	5000	-
21(Mechanical Strength, IS 302-1)	-	5000	-
22.1(Construction, IS 302-1)	-	5000	-
22.2(Construction)	-	5000	-
22.3(Construction)	-	5000	-
22.4(Construction)	-	5000	-
22.5(Construction)	-	5000	-
22.6(Construction)	-	5000	-
22.8(Construction)	-	5000	-
22.9(Construction)	-	5000	-
22.1(Construction)	-	5000	-
23(Internal Wiring, IS 302-1)	-	5000	-
23(Internal Wiring, IS 302-1)	-	5000	-
23(Internal Wiring, IS 302-1)	-	5000	-
23(Internal Wiring, IS 302-1)	-	5000	-
23(Internal Wiring, IS 302-1)	-	5000	-
23(Internal Wiring, IS 302-1)	-	5000	-
23(Internal Wiring, IS 302-1)	-	5000	-
23(Internal Wiring, IS 302-1)	-	5000	-
23(Internal Wiring, IS 302-1)	-	5000	-
23(Internal Wiring, IS 302-1)	-	5000	-
24.1(Components, IS 302-1)	-	5000	-
24.1(Components, IS 302-1)	-	5000	-
24.1(Components, IS 302-1)	-	5000	-
24.1(Components, IS 302-1)	-	5000	-
24.2(Components)	-	5000	-
24.4(Components)	-	5000	-
24.5(Components)	-	5000	-
24.7(Components)	-	5000	-
24.8(Components)	-	5000	-
24.9(Components)	-	5000	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	5000	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	5000	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	5000	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	5000	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	5000	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	5000	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	5000	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	5000	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	5000	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	5000	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	5000	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	5000	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	5000	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	5000	-
26(Terminals for External Conductors, IS 302-1)	-	5000	-
27(Provision for Earthing, IS 302-1)	-	5000	-
27(Provision for Earthing, IS 302-1)	-	5000	-
27(Provision for Earthing, IS 302-1)	-	5000	-
27(Provision for Earthing, IS 302-1)	-	5000	-
27(Provision for Earthing, IS 302-1)	-	5000	-
28(Screws & Connections, IS 302-1)	-	5000	-
29(Clearances and Distances through Insulation, IS 302-1)	-	5000	-
29(Clearances and Distances through Insulation, IS 302-1)	-	5000	-
30(Resistance to Heat, Fire, Tracking, IS 302-1)	-	5000	-
30(Resistance to Heat, Fire, Tracking, IS 302-1)	-	5000	-
31(Resistance of Rusting, IS 302-1)	-	5000	-
34.2(Operational tests- Grinding coffee (for machines which have a dry grinding arrangement))	-	5000	-
34.2(Operational tests- Grinding coffee (for machines which have a dry grinding arrangement))	-	5000	-
34.2(Operational tests- Grinding coffee (for machines which have a dry grinding arrangement))	-	5000	-
34.3(Whisking egg whites )	-	5000	-
34.4(IDLI batter-Grinding of black gram)	-	5000	-
34.4(IDLI batter-Grinding of rice)	-	5000	-
34.4(IDLI batter-Grinding of rice)	-	5000	-
34.4(IDLI batter-Grinding of rice)	-	5000	-
34.5.1 (a)(Operational test for juicers )	-	5000	-
34.5.1 (b)(Operational test for juicers )	-	5000	-
34.5.2(Operational test for juicers )	-	5000	-
35(Temperature withstand test for bowl)	-	5000	-
36(Test for controls )	-	5000	-
37(Strength of Assembly )	-	5000	-
37(Strength of Assembly )	-	5000	-
Cl 37(Strength of assembly)	-	5000	-
Cl 36(Test for controls)	-	5000	-
Cl 35(Temperature withstand test for bowl)	-	5000	-
Cl 34(Operational Tests)	-	5000	-
Cl.32(Radiation, toxicity and similar hazards)	-	5000	-
Cl.31(Resistance to rusting)	-	5000	-
Cl.30(Resistance to heat and fire)	-	5000	-
CL.29(Clearances, Creepage distances and Solid Insulation)	-	5000	-
Cl.28(Screws and connections)	-	5000	-
Cl.27(Provision for Earthing)	-	5000	-
Cl.26(Terminals for external conductors)	-	5000	-
Cl.25(Supply connection and external flexible cords)	-	5000	-
Cl.24(Components)	-	5000	-
Cl.23(Internal wiring)	-	5000	-
Cl.22(Construction)	-	5000	-
Cl.21(Mechanical Strength)	-	5000	-
Cl.20(Stability & Mechanical Hazards)	-	5000	-
Cl.19(Abnormal operation)	-	5000	-
Cl.18(Endurance)	-	5000	-
Cl. 16(Leakage current and Electric strength)	-	5000	-
Cl.15(Moisture Resistance)	-	5000	-
Cl.14(Transient Over voltage)	-	5000	-
Cl.13(Leakage current and Electric strength at operating temperature)	-	5000	-
Cl.11(Temperature rise/ Heating)	-	5000	-
Cl.10(Power Input and Current)	-	5000	-
Cl.8(Protection against access to live parts/ Protection against electric shock)	-	2000	-
Cl. 7(Marking and instructions)	-	2000	-
Cl. 6(Classification)	-	2000	-
6(Classification- IS 302-1 )	-	2000	-
6(Classification- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.2(Marking)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.4(Marking)	-	2000	-
7.5(Marking)	-	2000	-
7.6(Marking)	-	2000	-
8( Protection Against Electric Shock, IS 302-1)	-	2000	-
9(Starting, IS 302-1)	-	5000	-
10(Power Input and Current, IS 302-1)	-	5000	-
11(Heating, IS 302-1)	-	5000	-
11(Heating, IS 302-1)	-	5000	-
11(Heating, IS 302-1)	-	5000	-
11(Heating, IS 302-1)	-	5000	-
11(Heating, IS 302-1)	-	5000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	5000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	5000	-
14(Transient Over Voltages, IS 302-1)	-	5000	-
15(Moisture Resistance, IS 302-1)	-	10000	-
15.1(Moisture Resistance, IS 302-1)	-	10000	-
15.2(Moisture Resistance-Spillage test)	-	10000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	5000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	5000	-
19(Abnormal Operation, IS 302-1)	-	5000	-
19(Abnormal Operation, IS 302-1)	-	5000	-
19(Abnormal Operation, IS 302-1)	-	5000	-
19(Abnormal Operation, IS 302-1)	-	5000	-
20(Stability & Mechanical Hazards, IS 302-1)	-	5000	-
20(Stability & Mechanical Hazards, IS 302-1)	-	5000	-
21(Mechanical Strength, IS 302-1)	-	5000	-
21(Mechanical Strength, IS 302-1)	-	5000	-
22.1(Construction, IS 302-1)	-	5000	-
22.2(Construction)	-	5000	-
22.3(Construction)	-	5000	-
22.4(Construction)	-	5000	-
22.5(Construction)	-	5000	-
22.6(Construction)	-	5000	-
22.8(Construction)	-	5000	-
22.9(Construction)	-	5000	-
22.1(Construction)	-	5000	-
23(Internal Wiring, IS 302-1)	-	5000	-
23(Internal Wiring, IS 302-1)	-	5000	-
23(Internal Wiring, IS 302-1)	-	5000	-
23(Internal Wiring, IS 302-1)	-	5000	-
23(Internal Wiring, IS 302-1)	-	5000	-
23(Internal Wiring, IS 302-1)	-	5000	-
23(Internal Wiring, IS 302-1)	-	5000	-
23(Internal Wiring, IS 302-1)	-	5000	-
23(Internal Wiring, IS 302-1)	-	5000	-
23(Internal Wiring, IS 302-1)	-	5000	-
24.1(Components, IS 302-1)	-	5000	-
24.1(Components, IS 302-1)	-	5000	-
24.1(Components, IS 302-1)	-	5000	-
24.1(Components, IS 302-1)	-	5000	-
24.2(Components)	-	5000	-
24.4(Components)	-	5000	-
24.5(Components)	-	5000	-
24.7(Components)	-	5000	-
24.8(Components)	-	5000	-
24.9(Components)	-	5000	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	5000	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	5000	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	5000	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	5000	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	5000	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	5000	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	5000	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	5000	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	5000	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	5000	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	5000	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	5000	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	5000	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	5000	-
26(Terminals for External Conductors, IS 302-1)	-	5000	-
27(Provision for Earthing, IS 302-1)	-	5000	-
27(Provision for Earthing, IS 302-1)	-	5000	-
27(Provision for Earthing, IS 302-1)	-	5000	-
27(Provision for Earthing, IS 302-1)	-	5000	-
27(Provision for Earthing, IS 302-1)	-	5000	-
28(Screws & Connections, IS 302-1)	-	5000	-
29(Clearances and Distances through Insulation, IS 302-1)	-	5000	-
29(Clearances and Distances through Insulation, IS 302-1)	-	5000	-
30(Resistance to Heat, Fire, Tracking, IS 302-1)	-	5000	-
30(Resistance to Heat, Fire, Tracking, IS 302-1)	-	5000	-
31(Resistance of Rusting, IS 302-1)	-	5000	-
34.2(Operational tests- Grinding coffee (for machines which have a dry grinding arrangement))	-	5000	-
34.2(Operational tests- Grinding coffee (for machines which have a dry grinding arrangement))	-	5000	-
34.2(Operational tests- Grinding coffee (for machines which have a dry grinding arrangement))	-	5000	-
34.3(Whisking egg whites )	-	5000	-
34.4(IDLI batter-Grinding of black gram)	-	5000	-
34.4(IDLI batter-Grinding of rice)	-	5000	-
34.4(IDLI batter-Grinding of rice)	-	5000	-
34.4(IDLI batter-Grinding of rice)	-	5000	-
34.5.1 (a)(Operational test for juicers )	-	5000	-
34.5.1 (b)(Operational test for juicers )	-	5000	-
34.5.2(Operational test for juicers )	-	5000	-
35(Temperature withstand test for bowl)	-	5000	-
36(Test for controls )	-	5000	-
37(Strength of Assembly )	-	5000	-
37(Strength of Assembly )	-	5000	-
6(Classification- IS 302-1 )	-	2000	-
6(Classification- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.2(Marking)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.4(Marking)	-	2000	-
7.5(Marking)	-	2000	-
7.6(Marking)	-	2000	-
8( Protection Against Electric Shock, IS 302-1)	-	2000	-
9(Starting, IS 302-1)	-	5000	-
10(Power Input and Current, IS 302-1)	-	5000	-
11(Heating, IS 302-1)	-	5000	-
11(Heating, IS 302-1)	-	5000	-
11(Heating, IS 302-1)	-	5000	-
11(Heating, IS 302-1)	-	5000	-
11(Heating, IS 302-1)	-	5000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	5000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	5000	-
14(Transient Over Voltages, IS 302-1)	-	5000	-
15(Moisture Resistance, IS 302-1)	-	10000	-
15.1(Moisture Resistance, IS 302-1)	-	10000	-
15.2(Moisture Resistance-Spillage test)	-	10000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	5000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	5000	-
19(Abnormal Operation, IS 302-1)	-	5000	-
19(Abnormal Operation, IS 302-1)	-	5000	-
19(Abnormal Operation, IS 302-1)	-	5000	-
19(Abnormal Operation, IS 302-1)	-	5000	-
20(Stability & Mechanical Hazards, IS 302-1)	-	5000	-
20(Stability & Mechanical Hazards, IS 302-1)	-	5000	-
21(Mechanical Strength, IS 302-1)	-	5000	-
21(Mechanical Strength, IS 302-1)	-	5000	-
22.1(Construction, IS 302-1)	-	5000	-
22.2(Construction)	-	5000	-
22.3(Construction)	-	5000	-
22.4(Construction)	-	5000	-
22.5(Construction)	-	5000	-
22.6(Construction)	-	5000	-
22.8(Construction)	-	5000	-
22.9(Construction)	-	5000	-
22.1(Construction)	-	5000	-
23(Internal Wiring, IS 302-1)	-	5000	-
23(Internal Wiring, IS 302-1)	-	5000	-
23(Internal Wiring, IS 302-1)	-	5000	-
23(Internal Wiring, IS 302-1)	-	5000	-
23(Internal Wiring, IS 302-1)	-	5000	-
23(Internal Wiring, IS 302-1)	-	5000	-
23(Internal Wiring, IS 302-1)	-	5000	-
23(Internal Wiring, IS 302-1)	-	5000	-
23(Internal Wiring, IS 302-1)	-	5000	-
23(Internal Wiring, IS 302-1)	-	5000	-
24.1(Components, IS 302-1)	-	5000	-
24.1(Components, IS 302-1)	-	5000	-
24.1(Components, IS 302-1)	-	5000	-
24.1(Components, IS 302-1)	-	5000	-
24.2(Components)	-	5000	-
24.4(Components)	-	5000	-
24.5(Components)	-	5000	-
24.6(Components)	-	5000	-
24.7(Components)	-	5000	-
24.8(Components)	-	5000	-
24.9(Components)	-	5000	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	5000	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	5000	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	5000	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	5000	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	5000	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	5000	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	5000	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	5000	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	5000	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	5000	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	5000	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	5000	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	5000	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	5000	-
26(Terminals for External Conductors, IS 302-1)	-	5000	-
27(Provision for Earthing, IS 302-1)	-	5000	-
27(Provision for Earthing, IS 302-1)	-	5000	-
27(Provision for Earthing, IS 302-1)	-	5000	-
27(Provision for Earthing, IS 302-1)	-	5000	-
27(Provision for Earthing, IS 302-1)	-	5000	-
28(Screws & Connections, IS 302-1)	-	5000	-
29(Clearances and Distances through Insulation, IS 302-1)	-	5000	-
29(Clearances and Distances through Insulation, IS 302-1)	-	5000	-
30(Resistance to Heat, Fire, Tracking, IS 302-1)	-	5000	-
30(Resistance to Heat, Fire, Tracking, IS 302-1)	-	5000	-
31(Resistance of Rusting, IS 302-1)	-	5000	-
34.2(Operational tests- Grinding coffee (for machines which have a dry grinding arrangement))	-	5000	-
34.2(Operational tests- Grinding coffee (for machines which have a dry grinding arrangement))	-	5000	-
34.2(Operational tests- Grinding coffee (for machines which have a dry grinding arrangement))	-	5000	-
34.3(Whisking egg whites )	-	5000	-
34.4(IDLI batter-Grinding of black gram)	-	5000	-
34.4(IDLI batter-Grinding of rice)	-	5000	-
34.4(IDLI batter-Grinding of rice)	-	5000	-
34.4(IDLI batter-Grinding of rice)	-	5000	-
34.5.1 (a)(Operational test for juicers )	-	5000	-
34.5.1 (b)(Operational test for juicers )	-	5000	-
34.5.2(Operational test for juicers )	-	5000	-
35(Temperature withstand test for bowl)	-	5000	-
36(Test for controls )	-	5000	-
37(Strength of Assembly )	-	5000	-
37(Strength of Assembly )	-	5000	-
6(Classification- IS 302-1 )	-	2000	-
6(Classification- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.2(Marking)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.1(Marking- IS 302-1)	-	2000	-
7.4(Marking)	-	2000	-
7.5(Marking)	-	2000	-
7.6(Marking)	-	2000	-
8( Protection Against Electric Shock, IS 302-1)	-	2000	-
9(Starting, IS 302-1)	-	5000	-
10(Power Input and Current, IS 302-1)	-	5000	-
11(Heating, IS 302-1)	-	5000	-
11(Heating, IS 302-1)	-	5000	-
11(Heating, IS 302-1)	-	5000	-
11(Heating, IS 302-1)	-	5000	-
11(Heating, IS 302-1)	-	5000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	5000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	5000	-
14(Transient Over Voltages, IS 302-1)	-	5000	-
15(Moisture Resistance, IS 302-1)	-	10000	-
15.1(Moisture Resistance, IS 302-1)	-	10000	-
15.2(Moisture Resistance-Spillage test)	-	10000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	5000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	5000	-
19(Abnormal Operation, IS 302-1)	-	5000	-
19(Abnormal Operation, IS 302-1)	-	5000	-
19(Abnormal Operation, IS 302-1)	-	5000	-
19(Abnormal Operation, IS 302-1)	-	5000	-
20(Stability & Mechanical Hazards, IS 302-1)	-	5000	-
20(Stability & Mechanical Hazards, IS 302-1)	-	5000	-
21(Mechanical Strength, IS 302-1)	-	5000	-
21(Mechanical Strength, IS 302-1)	-	5000	-
22.1(Construction, IS 302-1)	-	5000	-
22.2(Construction)	-	5000	-
22.3(Construction)	-	5000	-
22.4(Construction)	-	5000	-
22.5(Construction)	-	5000	-
22.6(Construction)	-	5000	-
22.8(Construction)	-	5000	-
22.9(Construction)	-	5000	-
22.1(Construction)	-	5000	-
23(Internal Wiring, IS 302-1)	-	5000	-
23(Internal Wiring, IS 302-1)	-	5000	-
23(Internal Wiring, IS 302-1)	-	5000	-
23(Internal Wiring, IS 302-1)	-	5000	-
23(Internal Wiring, IS 302-1)	-	5000	-
23(Internal Wiring, IS 302-1)	-	5000	-
23(Internal Wiring, IS 302-1)	-	5000	-
23(Internal Wiring, IS 302-1)	-	5000	-
23(Internal Wiring, IS 302-1)	-	5000	-
23(Internal Wiring, IS 302-1)	-	5000	-
24.1(Components, IS 302-1)	-	5000	-
24.1(Components, IS 302-1)	-	5000	-
24.1(Components, IS 302-1)	-	5000	-
24.1(Components, IS 302-1)	-	5000	-
24.2(Components)	-	5000	-
24.4(Components)	-	5000	-
24.5(Components)	-	5000	-
24.6(Components)	-	5000	-
24.7(Components)	-	5000	-
24.8(Components)	-	5000	-
24.9(Components)	-	5000	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	5000	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	5000	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	5000	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	5000	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	5000	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	5000	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	5000	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	5000	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	5000	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	5000	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	5000	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	5000	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	5000	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	5000	-
26(Terminals for External Conductors, IS 302-1)	-	5000	-
27(Provision for Earthing, IS 302-1)	-	5000	-
27(Provision for Earthing, IS 302-1)	-	5000	-
27(Provision for Earthing, IS 302-1)	-	5000	-
27(Provision for Earthing, IS 302-1)	-	5000	-
27(Provision for Earthing, IS 302-1)	-	5000	-
28(Screws & Connections, IS 302-1)	-	5000	-
29(Clearances and Distances through Insulation, IS 302-1)	-	5000	-
29(Clearances and Distances through Insulation, IS 302-1)	-	5000	-
30(Resistance to Heat, Fire, Tracking, IS 302-1)	-	5000	-
30(Resistance to Heat, Fire, Tracking, IS 302-1)	-	5000	-
31(Resistance of Rusting, IS 302-1)	-	5000	-
34.2(Operational tests- Grinding coffee (for machines which have a dry grinding arrangement))	-	5000	-
34.2(Operational tests- Grinding coffee (for machines which have a dry grinding arrangement))	-	5000	-
34.2(Operational tests- Grinding coffee (for machines which have a dry grinding arrangement))	-	5000	-
34.3(Whisking egg whites )	-	5000	-
34.4(IDLI batter-Grinding of black gram)	-	5000	-
34.4(IDLI batter-Grinding of rice)	-	5000	-
34.4(IDLI batter-Grinding of rice)	-	5000	-
34.4(IDLI batter-Grinding of rice)	-	5000	-
34.5.1 (a)(Operational test for juicers )	-	5000	-
34.5.1 (b)(Operational test for juicers )	-	5000	-
34.5.2(Operational test for juicers )	-	5000	-
35(Temperature withstand test for bowl)	-	5000	-
36(Test for controls )	-	5000	-
37(Strength of Assembly )	-	5000	-
37(Strength of Assembly )	-	5000	-
Cl 37(Strength of assembly)	-	5000	-
Cl 36(Test for controls)	-	5000	-
Cl 35(Temperature withstand test for bowl)	-	5000	-
Cl 34(Operational Tests)	-	5000	-
Cl.32(Radiation, toxicity and similar hazards)	-	5000	-
Cl.31(Resistance to rusting)	-	5000	-
Cl.30(Resistance to heat and fire)	-	5000	-
CL.29(Clearances, Creepage distances and Solid Insulation)	-	5000	-
Cl.28(Screws and connections)	-	5000	-
Cl.27(Provision for Earthing)	-	5000	-
Cl.26(Terminals for external conductors)	-	5000	-
Cl.25(Supply connection and external flexible cords)	-	5000	-
Cl.24(Components)	-	5000	-
Cl.23(Internal wiring)	-	5000	-
Cl.22(Construction)	-	5000	-
Cl.21(Mechanical Strength)	-	5000	-
Cl.20(Stability & Mechanical Hazards)	-	5000	-
Cl.19(Abnormal operation)	-	5000	-
Cl.18(Endurance)	-	5000	-
Cl. 16(Leakage current and Electric strength)	-	5000	-
Cl.15(Moisture Resistance)	-	5000	-
Cl.14(Transient Over voltage)	-	5000	-
Cl.13(Leakage current and Electric strength at operating temperature)	-	5000	-
Cl.11(Temperature rise/ Heating)	-	5000	-
Cl.10(Power Input and Current)	-	5000	-
Cl.8(Protection against access to live parts/ Protection against electric shock)	-	2000	-
Cl. 7(Marking and instructions)	-	2000	-
Cl. 6(Classification)	-	2000	-

14 Nov, 2027

-
-

11878

Ace Test Labs & Metrology Pvt. Ltd., Sonipat

9162826

IS 302 : Part 2 : Sec 80 (2017)

Household and similar electrical appliances - Safety: Part 2 - 80 particular requirements for fans (First Revision)

26000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Marking and Instructions)	-	2000	-
7.0(Classification)	-	2000	-
8.0(Protection against access to live parts)	-	2000	-
10.0(Input and Current)	-	5000	-
11.0(Heating)	-	5000	-
13.0(Leakage Current and electric strength at operating temperature)	-	5000	-
14.0(Transient Overvoltage)	-	5000	-
15.0(Moisture resistance)	-	5000	-
16.0(Leakage current and Electric strength (After Humidity (Environmental) Treatment))	-	5000	-
17.0(Overload Protection of transformer and associated circuit)	-	5000	-
19.0(Abnormal Operation)	-	5000	-
20.0(Stability and mechanical hazards)	-	5000	-
21.0(Mechanical Strength)	-	5000	-
22.0(Construction)	-	5000	-
23.0(Internal Wiring)	-	5000	-
24.0(Components)	-	5000	-
25.0(Supply Connection and External Flexible Cords)	-	5000	-
26.0(Terminals for external conductors)	-	5000	-
27.0(Provision For Earthing)	-	5000	-
28.0(Screws and Connections)	-	5000	-
29.0(Creepage Distances and Clearances)	-	5000	-
30.0(Resistance To Heat and Fire)	-	5000	-
31.0(Resistance To Rusting)	-	5000	-
32.0(Radiation, Toxicity and Similar Hazards)	-	5000	-

14 Nov, 2027

-
Included w.e.f. 17-6-2021. EXCLUSION EMI/EMC (Cl.19.11.4.1 to Cl.19.11.4.4.)

11879

Ace Test Labs & Metrology Pvt. Ltd., Sonipat

9162826

IS 302 : Part 2 : Sec 21 (2018)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 21 stationary storage type electric water heaters (Second Revision)

31500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	2000	-
7.0(Marking and Instructions)	-	2000	-
8.0(Protection against access to live parts)	-	2000	-
10.0(Input and Current)	-	5000	-
11.0(Heating)	-	5000	-
13.0(Leakage Current and electric strength at operating temperature)	-	5000	-
14.0(Transient Overvoltage)	-	5000	-
15.0(Moisture resistance)	-	5000	-
16.0(Leakage current and Electric strength (After Humidity (Environmental) Treatment))	-	5000	-
17.0(Overload Protection of transformer and associated circuit)	-	5000	-
19.0(Abnormal Operation)	-	5000	-
20.0(Stability and mechanical hazards)	-	5000	-
21.0(Mechanical Strength)	-	5000	-
22.0(Construction)	-	5000	-
23.0(Internal Wiring)	-	5000	-
24(Components)	-	5000	-
25.0(Supply Connection and External Flexible Cords)	-	5000	-
26.0(Terminals for external conductors)	-	5000	-
27.0(Provision For Earthing)	-	5000	-
28.0(Screws and Connections)	-	5000	-
29.0(Creepage Distances and Clearances)	-	5000	-
30.0(Resistance To Heat and Fire)	-	5000	-
31.0(Resistance To Rusting)	-	5000	-
24(Components)	-	5000	-
24(Components)	-	5000	-
24(Components)	-	5000	-
24(Components)	-	5000	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	2000	-
32(RADIATION TOXICITY AND SIMILAR HAZARDS)	-	5000	-
24(Components)	-	5000	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	2000	-
32(RADIATION TOXICITY AND SIMILAR HAZARDS)	-	5000	-
4(GENERAL REQUIREMENTS)	-	2000	-

14 Nov, 2027

-
Exclusion: 19.11.4.1 (Electrostatic discharges) 19.11.4.2 (Radiated fields) 19.11.4.3 (Fast transient bursts) 19.11.4.4 (Surge immunity test) 19.11.4.5 (Immunity to conducted discharges) 19.11.4.6 (Class 3 Voltage dips and interruptions) 19.11.4.7 (Harmonics)

11880

Stellar Test House, Noida

8171606

IS 3812 : Part 2 (2013)

Pulverized Fuel Ash - Part 2 : For Use as Admixture in Cement Mortar and Concrete

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1, Table 1(Fineness — Specific surface in m2 /kg)	-	1000	-
7.1, Table 1(Particles retained on 45 micron IS sieve (wet sieving))	-	500	-
7.1, Table 1(Soundnes)	-	1200	-
5.1, 6.1, Table 1(Silicon dioxide (SiO2 ) plus aluminium oxide (Al2O3 ) plus iron oxide (Fe2O3 ))	-	500	-
5.1, 6.1, Table 1(Silicon dioxide (SiO2 ))	-	500	-
5.1, 6.1, Table 1(Magnesium oxide (MgO)	-	800	-
5.1, 6.1, Table 1(Total sulphur as sulphur trioxide (SO3)	-	500	-
5.1, 6.1, Table 1(Available alkalies as equivalent sodium oxide (Na2O))	-	1500	-
5.1, 6.1, Table 1(Total chlorides)	-	500	-
5.1, 6.1, Table 1(Loss on ignition)	-	500	-

26 Sep, 2028

-
Included w.e.f. 28.03.2024

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number