BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15588 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

10321

ACCURATE TEST SOLUTIONS LLP (F21), NOIDA

8141226

IS 13252 : Part 1 (2010)

Information technology equipment - Safety: Part 1 general requirements (Second Revision)

45000 View breakup
Rs.45,000/- for Automatic Data Processing Machine, Laptop/Notebook/ Tablet, Printer, Plotter, Scanner, Set Top Box, Telephone answering machines, Visual display unit, videos monitors of screen size 32” & above restricted to 90”, Cash Registers, Copying machine/ duplicator, Point of sale terminal, Mail processing machine/ postage machine/ Franking machine, Power adaptor for IT equipments, Visual display unit, videos monitors of screen size upto 32”, Passport Reader, Power bank for use in portable applications, Mobile phones, Smart card reader, CCTV Camera/ CCTV Recorders, USB driven Barcode readers, Barcode scanners, iris scanners, Optical Fingerprint Scanners & Smart watches, Wireless Keyboard, Keyboard, Automatic Teller Cash Dispensing Machines, USB Type External Hard Disk Drive, USB type External Solid State Storage Devices (above 256 GB Capacity), Standalone Switch Mode Power supplies (SMPS) with output Voltage 48 V (max.), Digital Camera. [10% Discount to BIS]

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1.6(Power interface .)	-	1400	10 % Discount for BIS.
1.7(Markings and instructions)	-	1000	10 % Discount for BIS.
2.1(Protection from electric shock and energy hazards)	-	600	10 % Discount for BIS.
2.2(SELV circuits)	-	500	10 % Discount for BIS.
2.3(TNV circuits)	-	500	10 % Discount for BIS.
2.4(Limited current circuits)	-	1000	10 % Discount for BIS.
2.5(Limited power sources .)	-	1000	10 % Discount for BIS.
2.6(Provisions for earthing and bonding)	-	650	10 % Discount for BIS.
2.7(Overcurrent and earth fault protection in primary circuits)	-	800	10 % Discount for BIS.
2.8(Safety interlocks)	-	500	10 % Discount for BIS.
2.9(Electrical insulation)	-	2000	10 % Discount for BIS.
2.10(Clearances, creepage distances and distances through insulation)	-	5000	10 % Discount for BIS.
3.1(General)	-	500	10 % Discount for BIS.
3.2(Connection to a mains supply)	-	350	10 % Discount for BIS.
3.3(Wiring terminals for connection of external conductors)	-	350	10 % Discount for BIS.
3.4(Disconnection from the mains supply)	-	350	10 % Discount for BIS.
3.5(Interconnection of equipment)	-	400	10 % Discount for BIS.
4.1(Stability)	-	250	10 % Discount for BIS.
4.2(Mechanical strength)	-	5000	10 % Discount for BIS.
4.3(Design and construction)	-	450	10 % Discount for BIS.
4.4(Protection against hazardous moving parts)	-	500	10 % Discount for BIS.
4.5(Thermal requirements)	-	2500	10 % Discount for BIS.
4.6(Openings in enclosures)	-	400	10 % Discount for BIS.
4.7(Resistance to fire)	-	1000	10 % Discount for BIS.
5.1(Touch current and protective conductor curren)	-	500	10 % Discount for BIS.
5.2(Electric strength)	-	1500	10 % Discount for BIS.
5.3(Abnormal operating and fault conditions)	-	3000	10 % Discount for BIS.
6.1(Protection of telecommunication network service persons, and users of other equipment connected to the network, from hazards in the equipment)	-	600	10 % Discount for BIS.
6.2(Protection of equipment users from overvoltages on networks telecommunication)	-	600	10 % Discount for BIS.
6.3(Protection of the telecommunication wiring system from overheating)	-	800	10 % Discount for BIS.
7.1(General)	-	500	10 % Discount for BIS.
7.2(Protection of cable distribution system service persons, and users of other equipment connected to the system, from hazardous voltages in the equipment)	-	500	10 % Discount for BIS.
7.3(Protection of equipment users from overvoltages on the cable distribution system)	-	500	10 % Discount for BIS.
7.4(Insulation between primary circuits and cable distribution systems)	-	500	10 % Discount for BIS.

04 Jul, 2027

-
Additional Products included w.e.f. 29-05- 2020. Excluding: Component (Cl.1.5), Moving parts (Cl.2.8.5), Switches & Relays (Cl.2.8.7), Semiconductor Devices (Cl.2.10.5.4), AC power supply cords (Cl.3.2.5.1), Cathode Ray Tube (Cl.4.2.8), Batteries (Cl.4.3.8), Radiation Test (Cl.4.3.13)

10322

ACCURATE TEST SOLUTIONS LLP (F21), NOIDA

8141226

IS 16242 : Part 1 (2014)

Uninterruptible power systems (UPS): Part 1 general and safety requirements for UPS

45000 View breakup
Rs. 45,000/- [10% discount to BIS]

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.6(Power interface)	-	3000	10 % Discount for BIS.
4.7(Marking & instructions)	-	1000	10 % Discount for BIS.
5.1(Protection against shock and energy hazards)	-	1000	10 % Discount for BIS.
5.2(Requirement of auxiliary circuits)	-	2000	10 % Discount for BIS.
5.3(Protective earthing and bonding)	-	1000	10 % Discount for BIS.
5.4(AC and DC power isolation)	-	1000	10 % Discount for BIS.
5.5(Over current and earth fault condition)	-	500	10 % Discount for BIS.
5.6(Safety interlocks)	-	500	10 % Discount for BIS.
5.7(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	5500	10 % Discount for BIS.
6.1(Wiring, connections and supply)	-	1000	10 % Discount for BIS.
6.2(Connection to power)	-	1500	10 % Discount for BIS.
6.3(Wiring terminals for external power conductors)	-	1000	10 % Discount for BIS.
7.1(Enclosure)	-	1000	10 % Discount for BIS.
7.2(STABILITY)	-	1000	10 % Discount for BIS.
7.3(MECHANICAL STRENGTH)	-	4000	10 % Discount for BIS.
7.4(Construction details)	-	1500	10 % Discount for BIS.
7.5(Resistance to fire)	-	500	10 % Discount for BIS.
7.6(Battery location)	-	500	10 % Discount for BIS.
7.7(Temperature rise)	-	5000	10 % Discount for BIS.
8.1(General procision for earth leakage)	-	2500	10 % Discount for BIS.
8.2(Electric Strength)	-	3000	10 % Discount for BIS.
8.3(Abnormal operating and fault conditions)	-	4000	10 % Discount for BIS.
9.0(Connection to telecommunication networks)	-	3000	10 % Discount for BIS.

04 Jul, 2027

-
EXCLUSIONS: Components (Cl.4.5 / RD Cl.1.5), Protection of Personnel Safety Interlocks (Cl. 5.6/ RD Cl.2.8.5 Moving parts), Protection of Personnel Safety Interlocks (Cl. 5.6/ RD Cl.2.8.7 Switches & Relays), Clearances, creepage distances and distances through insulation (Cl.5.7/RD 2.10.5.4 Semi-conductor devices), General provisions for connection to power (Cl.6.2.1/RD Cl.3.2.6.1 Power supply cords), Batteries (Cl.7.6/RD Cl.4.3.8). • Scope restricted to all types of UPS up to 10 Kva except the construction having inbuilt batteries compartment.

10323

Unique Test House LLP

9134536

IS 4990 (2024)

PLYWOOD FOR CONCRETE SHUTTERING WORKS SPECIFICATION (Fourth Revision)

Grade-BWP/ Type- CS/ CSC/CSFF /All Size as per IS

16000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Timber)	-	8000	FACE VENEER -2500/- CORE VENEER-2500/- FILM FACE & BASE PAPER -3000/-
Cl-5.2(Adhesives for Bonding of Veneers)	-	9000	-
Cl-6.1(Manufacture)	-	100	-
Cl-6.2(Manufacture ( Thickness of veneers))	-	100	-
Cl-6.3(Manufacture ( Physical and mechanical properties of veneers))	-	100	-
Cl-6.4, 6.7(Manufacture (Plywood for concrete shuttering))	-	100	-
Cl-6.5(Manufacture (Scarf joints))	-	100	-
Cl-6.6(Manufacture ( Preservative treatment))	-	2000	-
Cl-7.1(Dimensions -length)	-	250	-
Cl-7.2(Thickness)	-	250	-
Cl-7.3(Squareness)	-	250	-
Cl-8.1, 8.2(Workmanship and finish)	-	250	-
Cl-10.3(Moisture Content)	-	500	-
Cl-10.4.1(Glue Adhesion in Dry State - Glue Shear Strength-WOOD FAILURE, Average)	-	1000	-
Cl-10.4.2(Glue Adhesion in Dry State - Adhesion of Plies)	-	500	-
Cl-10.5, 10.5.1(Resistance to water test- glue shear strength- WOOD Failure, Average)	-	1000	-
Cl-10.5.1.1(Water Resistance Test-Glue shear strength)	-	1000	-
Cl-10.5.1.2(Water Resistance Test-Adhesion of plies)	-	1000	-
Cl-10.6(Water resistance test (Concrete shuttering Plywood))	-	500	-
Cl-10.7.1, Table-2(Mycological Test- Glue shear strengt)	-	2000	-
Cl-10.7.2(Mycological Test- Adhesion of plies)	-	500	-
Cl-10.8(Tensile Strength)	-	2500	-
Cl-10.9, Table-3 (i)(Along (parallel to the grain direction of the face veneer))	-	1000	-
Cl-10.9, Table-3 (ii)(Across (perpendicular to the grain direction of the face veneer))	-	1000	-
Cl-10.10, Table-4 (i) a((Modulus of Elasticity: Across the Face Grain: Average) Wet Bending)	-	1000	-
Cl-10.10, Table-4 (i) b((Modulus of Rupture: Across the Face Grain: Minimum Individual) Wet Bending)	-	1000	-
Cl-10.11(Retention of Preservative)	-	2000	-
Cl-10.12(Formaldehyde Content Test)	-	2000	-

07 Sep, 2028

-
Included w.e.f. 30.10.2024 Exclusion Cl-10.13 (Steady-State Formaldehyde Emission Test) Cl-10.5.2 (Water Resistance Test (Alternate method))

10324

EKO PRO ENGINEERS PRIVATE LIMITED (32/41), GHAZIABAD

9179706

IS 2052 (2023)

Compounded feeds for cattle ï¿½ Specification

11500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl no.4.1(General)	-	0	-
Cl no.4.2(Ingredients)	-	0	-
Cl no.4.3,7.1, Table no. 1(i)(Moisture)	-	300	-
Cl no.4.3,7.1, Table no. 1(ii)(Crude protein (N × 6.25))	-	800	-
Cl no.4.3, 7.1,Table no. 1(iii)(Crude fat)	-	700	-
Cl no.4.3 ,7.1, Table no. 1(iv)(Crude fibre)	-	600	-
Cl no.4.3 ,7.1, Table no. 1(v)(Acid insoluble ash)	-	500	-
Cl no.4.3,7.1Table no. 1(vi)("Salt (as NaCl based on Na or Cl), percent by mass")	-	500	-
Cl no.4.3 7.1,Table no. 1(vii)(Calcium (as Ca))	-	500	-
Cl no.4.3,7.1,Table no. 1(viii)(Total phosphorus)	-	600	-
Cl no.4.3,7.1,Table no. 1(ix)(Available phosphorus)	-	600	-
Cl no.4.3 ,7.1, Table no. 1(x)(Urea, percent by mass)	-	900	-
Cl no.4.3,7.1, Table no. 1(xi)(Vitamin A)	-	1000	-
Cl no.4.3,7.1,Table no. 1(xii)(Vitamin D)	-	1000	-
Cl no.4.3 ,7.1, Table no. 1(xiii)(Vitamin E)	-	1000	-
Cl no.4.3 ,7.1, Table no. 1(xiv)(Aflatoxin B1)	-	1800	-
Cl no.4.3 ,7.1, Table no. 1(xv)(Cadmium)	-	700	-
Cl no.5(Packing and marking)	-	0	-
4.1(General)	-	0	-
4.2.2(Ratio of total nitrogen to sulphur/ IS/ISO 5983 (Part 1)* or IS/ISO 5983 (Part 2) ISO 16634-Sulphur-AnnexB (IS 1664 or EN 15621))	-	550	-
4.3 Table no.1 (i)(Moisture/4 of IS 7874 (Part 1))	-	300	-
4.3 Table no.1 (ii)("Crude Protein(ODB)/IS/ISO 5983 (Part 1)* or IS 5983 (Part 2) or ISO 16634-1")	-	0	Already mentioned Crude Protein-800/-
4.3 Table no.1 (iii)(Crude fat (ODB) /IS/ISO 6492)	-	0	Already mentioned Crude Fat-700/-
4.3 Table no.1 (iv)("Crude fibre (ODB)/IS/ISO 6865 ")	-	0	Already mentioned Crude fibre-600/-
4.3 Table no.1 (v)(Acid insoluble ash (ODB)/Annex A of IS 1712 or IS 14826*)	-	0	Already mentioned Crude Protein-500/-
4.3 Table no.1 (vi)("Salt (ODB)(as NaCl based on Na or Cl)/4 of IS 7874 (Part 2)")	-	0	Already mentioned Salt-500/-
4.3 Table no.1 (vii)(Calcium(ODB) (as Ca)/IS 13433 (Part 1) or IS 15121* or EN 15621)	-	0	Already mentioned calcium-800/-
4.3 Table no.1 (viii)(Total phosphorus (ODB)/IS 14828* or EN 15621)	-	0	Already mentioned total phosphorous-600/-
4.3 Table no.1 (ix)(Available phosphorus (ODB)/Annex F of IS 1374)	-	450	Already mentioned Available phosphorous-600/-
4.3 Table no.1 (x)(Urea (ODB)/IS 7874 (Part 1) or AOAC 967.07)	-	0	Already mentioned Urea-900/-
4.3 Table no.1 (xi)(Vitamin A(ODB)/IS 15120)	-	0	Already mentioned-1000/-
4.3 Table no.1 (xii)("Vitamin D3 (ODB)/Annex C * or J. AOAC Int. 2012, Vol. 95, No. 5, Pages 1487–1494")	-	0	Already mentioned-1000/-
4.3 Table no.1 (xiii)(Vitamin E(ODB)/IS 15948)	-	0	Already mentioned-1000/-
4.3 Table no.1 (xiv)("Aflatoxin B1 (ODB)/IS/ISO 14718* or ISO 17375 or AOAC 2003.02")	-	0	Already mentioned-1800/-
4.3 Table no.1 (xv)(Cadmium (ODB)/EN 17053)	-	0	Already mentioned-700/-

26 Aug, 2027

-
-

10325

Hindustaan Testing Solutions LLP, Ambala

9122136

IS 303 (2024)

Plywood for General Purposes â Specification (Fourth Revision)

MR/BWR/BWP

14400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Classification by appearance)	-	0	Testing charges-8900 (MR)/10600 (BWR)/11100 (BWP) 20% discount to BIS GSTIN as per govt rule.
Cl-5.2, Table- 1 (i)(Blister)	-	400	Clause 5.2, Table 1-Testing charges-400
Cl-5.2, Table- 1 (ii)(Checks)	-	0	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	0	-
Cl-5.2, Table- 1 (iv)(Dote)	-	0	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	0	-
Cl-5.2, Table- 1 (vi)(Joints)	-	0	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	0	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	0	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	0	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	0	-
Cl-5.2, Table- 1 (xi)(Patches)	-	0	-
Cl-5.2, Table- 1 (xii)(Splits)	-	0	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	0	-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	0	-
Cl-6.1(Timber)	-	0	-
Cl-6.2(Adhesive)	-	0	Separate testing charges as per BIS scope of Testing
Cl-7.2.1(Thickness of veneers)	-	0	Separate testing charges-400
Cl-7.2.3(Grain Direction)	-	0	-
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	0	-
Cl-7.2.5.2(Splits)	-	0	-
Cl-7.2.5.3(Overlap)	-	0	-
Cl-8.1(Dimensions -length)	-	200	-
Cl-8.2(Thickness of the plywood boards)	-	200	-
Cl-8.3(Squareness)	-	200	-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	6300	Testing charges-800 (MR)/2500 (BWR)/3000 (BWP)
Cl-11.3.2(Mycological Test)	-	2500	-
Cl-11.4(Moisture Content)	-	600	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	1000	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	1000	-
Cl-11.6(Formaldehyde Content Test)	-	2000	-
Cl-5.1(Classification by appearance)	-	0	-
Cl-5.2, Table- 1 (i)(Blister)	-	0	-
Cl-5.2, Table- 1 (ii)(Checks)	-	0	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	0	-
Cl-5.2, Table- 1 (iv)(Dote)	-	0	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	0	-
Cl-5.2, Table- 1 (vi)(Joints)	-	0	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	0	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	0	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	0	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	0	-
Cl-5.2, Table- 1 (xi)(Patches)	-	0	-
Cl-5.2, Table- 1 (xii)(Splits)	-	0	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	0	-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	0	-
Cl-6.1(Timber)	-	0	-
Cl-6.2(Adhesive)	-	0	-
Cl-7.2.1(Thickness of veneers)	-	0	-
Cl-7.2.3(Grain Direction)	-	0	-
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	0	-
Cl-7.2.5.2(Splits)	-	0	-
Cl-7.2.5.3(Overlap)	-	0	-
Cl-8.1(Dimensions -length)	-	0	-
Cl-8.2(Thickness of the plywood boards)	-	0	-
Cl-8.3(Squareness)	-	0	-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	0	-
Cl-11.3.2(Mycological Test)	-	0	-
Cl-11.4(Moisture Content)	-	0	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	0	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	0	-
Cl-11.6(Formaldehyde Content Test)	-	0	-

12 Sep, 2028

-
Included w.e.f. 25.09.2024 Exclusion: Cl-11.7 (Steady-State Formaldehyde Emission Test)

10326

Unique Test House LLP

9134536

IS 710 (2024)

MARINE PLYWOOD - SPECIFICATION (Third Revision)

TYPE- BWP/ ALL SIZES AS PER IS

15500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(Timber)	-	5000	CORE VENEER AND FACE VENEER
Cl-4.2(Adhesive)	-	9500	-
Cl-5.1(Veneers)	-	500	-
Cl-5.2.1(Glueing)	-	200	-
Cl -5.2.2(Thickness of Veneers)	-	200	-
Cl - 5.2.3.1(Joint in Veneers)	-	200	-
Cl - 5.2.3.2(Edge joints)	-	200	-
Cl - 5.2.3.3(End joints)	-	200	-
Cl - 5.2.3.4(Scarf joints)	-	200	-
Cl - 5.2.4(Grain Direction)	-	200	-
Cl-5.3(Treatment)	-	2000	-
Cl-5.4(Moisture Content)	-	500	-
Cl-6.1(Dimensions (length))	-	250	-
Cl-6.2(Thickness)	-	250	-
Cl-6.3(Squareness)	-	250	-
Cl-7.1, 7.2, 7.3, 7.4, 7.5 & 7.6(Workmanship and finish)	-	250	-
Cl-9.3(Moisture Content)	-	500	-
Cl-9.4.2(Glue Adhesion in Dry State- Adhesion of Plies)	-	500	-
Cl-9.4.1(Glue Adhesion in Dry State- Glue Shear Strength -Average)	-	1500	-
Cl-9.5.1.1(Glue Adhesion in Water Resistance - Glue Shear Strength -Average)	-	1500	-
Cl-9.5.1.2(Water Resistance Test-Adhesion of plies)	-	500	-
Cl-9.5.2(Water Resistance Test)	-	1000	-
Cl-9.6(Tensile Strength-Along the grain)	-	1500	-
Cl-9.7(Mycological Test -Adhesion)	-	2000	-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	1250	-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	1250	-
Cl-9.9, Table-3 (i) a((Modulus of Elasticity: Across the Face Grain: Average) Wet Bending)	-	1250	-
Cl-9.9, Table-3 (i) b((Modulus of Elasticity: Across the Face Grain: Minimum Individual) Wet Bending)	-	1250	-
Cl-9.10(Retention of Preservative)	-	2000	-
Cl-9.11(Formaldehyde Content Test)	-	2000	-
Cl-4.1(Timber)	-	500	-
Cl-4.2(Adhesive)	-	9000	-
Cl-5.1(Veneers)	-	500	-
Cl-5.2.1(Glueing)	-	500	-
Cl -5.2.2(Thickness of Veneers)	-	500	-
Cl - 5.2.3.1(Joint in Veneers)	-	200	-
Cl - 5.2.3.2(Edge joints)	-	200	-
Cl - 5.2.3.3(End joints)	-	200	-
Cl - 5.2.3.4(Scarf joints)	-	200	-
Cl - 5.2.4(Grain Direction)	-	200	-
Cl-5.3(Treatment)	-	200	-
Cl-5.4(Moisture Content)	-	1000	-
Cl-6.1(Dimensions (length))	-	500	-
Cl-6.2(Thickness)	-	200	-
Cl-6.3(Squareness)	-	200	-
Cl-7.1, 7.2, 7.3, 7.4, 7.5 & 7.6(Workmanship and finish)	-	200	-
Cl-9.3(Moisture Content)	-	1500	-
Cl-9.4.2(Glue Adhesion in Dry State- Adhesion of Plies)	-	200	-
Cl-9.4.1(Glue Adhesion in Dry State- Glue Shear Strength -Average)	-	200	-
Cl-9.5.1.1(Glue Adhesion in Water Resistance - Glue Shear Strength -Average)	-	500	-
Cl-9.5.1.2(Water Resistance Test-Adhesion of plies)	-	500	-
Cl-9.5.2(Water Resistance Test)	-	1000	-
Cl-9.6(Tensile Strength-Along the grain)	-	1500	-
Cl-9.7(Mycological Test -Adhesion)	-	1500	-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	1500	-
Cl-9.8, Table-2(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	1500	-
Cl-9.9, Table-3 (i) a((Modulus of Elasticity: Across the Face Grain: Average) Wet Bending)	-	1500	-
Cl-9.9, Table-3 (i) b((Modulus of Elasticity: Across the Face Grain: Minimum Individual) Wet Bending)	-	1500	-
Cl-9.10(Retention of Preservative)	-	500	-
Cl-9.11(Formaldehyde Content Test)	-	2500	-
Cl-9.4.2(Adhesion of Plies)	-	500	-
5.1.1(Defects in veneers)	-	200	-

07 Sep, 2028

-
Included w.e.f 24.10.2024 Excluding Cl 9.12 (Steady state formaldehyde emission test)

10327

Renewable Energy Test Centre (RTC), Murthal

9137734

IS 12933 : Part 1 (2003)

Solar flat plate collector - Specification: Part 1 requirements (Second Revision)

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.2.2(External Thermal Shock Test )	-	500	Above Testing Charges excluded GST as per Govt.
7.2.5(Impact Resistance Test)	-	250	Above Testing Charges excluded GST as per Govt.
7.2.8(Incident Angle Modifier Test)	-	2000	Above Testing Charges excluded GST as per Govt.
7.2.2(Internal Thermal Shock Test )	-	500	Above Testing Charges excluded GST as per Govt.
7.2.1(Outdoor No Flow Exposure Test )	-	2000	Above Testing Charges excluded GST as per Govt.
7.2.4(Rain Penetration Test)	-	500	Above Testing Charges excluded GST as per Govt.
7.1.1(Static Pressure Leakage Test)	-	500	Above Testing Charges excluded GST as per Govt.
4(Components: The various components of solar flat plate collector shall be as specified in IS 12933 (Part 2))	-	500	Above Testing Charges excluded GST as per Govt.
7.2.6(Thermal Efficiency Test)	-	6000	Above Testing Charges excluded GST as per Govt.
4(Components: The various components of solar flat plate collector shall be as specified in IS 12933 (Part 2))	-	500	Above Testing Charges excluded GST as per Govt.
7.2.7(Determination of the Time Constant )	-	1000	Above Testing Charges excluded GST as per Govt.
4(Components: The various components of solar flat plate collector shall be as specified in IS 12933 (Part 2))	-	750	Above Testing Charges excluded GST as per Govt.
4(Absorber -Temperature test (Cl.9.1.4 of IS 12933 (Part 2))	-	500	Above Testing Charges excluded GST as per Govt.
4(Thermal shock Test -Gaskets and Grommets (Cl.12.1 of IS 12933 (Part 2))	-	500	Above Testing Charges excluded GST as per Govt.

31 Dec, 2026

-
-

10328

Renewable Energy Test Centre (RTC), Murthal

9137734

IS 13429 : Part 1 (2020)

Solar Cooker — Box Type — Specification Part 1 Requirements ( Second Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.4.1(Exposure test)	-	500	Please add GST as per Govt. norms in above mentioned rate.
7.3(Routine test)	-	250	Please add GST as per Govt. norms in above mentioned rate.
7.4.2(Load test for FRP body cookers only)	-	250	Please add GST as per Govt. norms in above mentioned rate.
4.3(Mirror or Reflector)	-	500	Please add GST as per Govt. norms in above mentioned rate.
7.3.1(Rain penetration test)	-	500	Please add GST as per Govt. norms in above mentioned rate.
7.4(Load test Sensible heating of water)	-	800	Please add GST as per Govt. norms in above mentioned rate.
7.3.2(Slam test )	-	200	Please add GST as per Govt. norms in above mentioned rate.
7.4(Stagnation temperature test)	-	800	Please add GST as per Govt. norms in above mentioned rate.
7.4.1(Exposure test)	-	0	-
7.4(Load test Sensible heating of water)	-	0	-
7.4(Standard boiling time, minute)	-	0	-
4.3(Handle and knob test)	-	100	Please add GST as per Govt. norms in above mentioned rate.
4.3(Creep test)	-	100	Please add GST as per Govt. norms in above mentioned rate.
4.3(Solar transmittance of double glass lid at near normal incidence, Percent)	-	500	Please add GST as per Govt. norms in above mentioned rate.
4.3(Temperature test for pain at 175 degree centegrade for 1 hour)	-	200	Please add GST as per Govt. norms in above mentioned rate.
4.3(Thermal shock test- 4.5 of IS 13429:Part 2)	-	300	Please add GST as per Govt. norms in above mentioned rate.

31 Dec, 2026

-
-

10329

TUV SUD SOUTH ASIA PRIVATE LIMITED, BENGALURU

6180126

IS 10322 : PART 5 : SEC 3 (2012)

Luminaires: Part 5 particular requirements: Sec 3 luminaires for road and street lighting (First Revision)

luminaires for road and street lighting

80000 View breakup
Rs.80,000/- (10% Discount)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Test Requireements)	-	2500	10% discount to BIS
5(Classification of Luminaires')	-	2500	10% discount to BIS
6.0(Marking)	-	3000	10% discount to BIS
7.0(Construction)	-	4000	10% discount to BIS
8.0(Creepage Distance and Clearances)	-	5000	10% discount to BIS
9.0(Provision for earthing)	-	7000	10% discount to BIS
10.0(Terminals)	-	7000	10% discount to BIS
11.0(External & Internal Wiring)	-	8000	10% discount to BIS
12.0(Protection against electric shock)	-	9000	10% discount to BIS
13.0(Endurance Tests and Thermal Tests)	-	10000	10% discount to BIS
14.0(Resistance to Dust & Moisture)	-	7000	10% discount to BIS
15.0(Insulation Resistance and Electric Strength)	-	8000	10% discount to BIS
16.0(Resistance to Heat , fire and tracking)	-	7000	10% discount to BIS

11 Sep, 2027

-
Exclusion: Cl.4.24 (UV Radiation), Cl.4.11.6 (Electromechanical Contact), Cl.17 (Photometric test)

10330

Unique Test House LLP

9134536

IS 303 (2024)

Plywood for General Purposes â Specification (Fourth Revision)

GRADE-MR/BWR/BWP/ TYPE- AA/AB/BB/ SIZE- ALL SIZES

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Classification by appearance)	-	500	-
Cl-5.2, Table- 1 (i)(Blister)	-	100	-
Cl-5.2, Table- 1 (ii)(Checks)	-	100	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	100	-
Cl-5.2, Table- 1 (iv)(Dote)	-	100	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	100	-
Cl-5.2, Table- 1 (vi)(Joints)	-	100	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	100	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	100	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	100	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	100	-
Cl-5.2, Table- 1 (xi)(Patches)	-	100	-
Cl-5.2, Table- 1 (xii)(Splits)	-	100	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	100	-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	100	-
Cl-6.1(Timber)	-	5000	for Face Veneer and Core Veneer Only
Cl-6.2(Adhesive)	-	9000	Grade -MR- 8500, Grade -BWR-9000, Grade -BWP-9500/-
Cl-7.2.1(Thickness of veneers)	-	100	-
Cl-7.2.3(Grain Direction)	-	100	-
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	100	-
Cl-7.2.5.2(Splits)	-	100	-
Cl-7.2.5.3(Overlap)	-	100	-
Cl-8.1(Dimensions -length)	-	250	-
Cl-8.2(Thickness of the plywood boards)	-	250	-
Cl-8.3(Squareness)	-	250	-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	2000	-
Cl-11.3.2(Mycological Test)	-	2000	-
Cl-11.4(Moisture Content)	-	500	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	2500	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	2500	-
Cl-11.6(Formaldehyde Content Test)	-	2000	-
Cl-5.1(Classification by appearance)	-	200	-
Cl-5.2, Table- 1 (i)(Blister)	-	200	-
Cl-5.2, Table- 1 (ii)(Checks)	-	200	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	200	-
Cl-5.2, Table- 1 (iv)(Dote)	-	200	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	200	-
Cl-5.2, Table- 1 (vi)(Joints)	-	200	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	200	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	200	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	200	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	200	-
Cl-5.2, Table- 1 (xi)(Patches)	-	200	-
Cl-5.2, Table- 1 (xii)(Splits)	-	200	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	200	-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	200	-
Cl-6.1(Timber)	-	200	-
Cl-6.2(Adhesive)	-	8500	-
Cl-7.2.1(Thickness of veneers)	-	200	-
Cl-7.2.3(Grain Direction)	-	200	-
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	200	-
Cl-7.2.5.2(Splits)	-	200	-
Cl-7.2.5.3(Overlap)	-	200	-
Cl-8.1(Dimensions -length)	-	200	-
Cl-8.2(Thickness of the plywood boards)	-	200	-
Cl-8.3(Squareness)	-	2000	-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	2000	-
Cl-11.3.2(Mycological Test)	-	2000	-
Cl-11.4(Moisture Content)	-	1000	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	500	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	500	-
Cl-11.6(Formaldehyde Content Test)	-	3000	-
Cl-5.1(Classification by appearance)	-	500	-
Cl-5.2, Table- 1 (i)(Blister)	-	500	-
Cl-5.2, Table- 1 (ii)(Checks)	-	500	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	500	-
Cl-5.2, Table- 1 (iv)(Dote)	-	500	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	500	-
Cl-5.2, Table- 1 (vi)(Joints)	-	500	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	500	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	500	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	500	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	500	-
Cl-5.2, Table- 1 (xi)(Patches)	-	500	-
Cl-5.2, Table- 1 (xii)(Splits)	-	500	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	500	-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	500	-
Cl-6.1(Timber)	-	500	-
Cl-6.2(Adhesive)	-	9500	-
Cl-7.2.1(Thickness of veneers)	-	200	-
Cl-7.2.3(Grain Direction)	-	200	-
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	200	-
Cl-7.2.5.2(Splits)	-	200	-
Cl-7.2.5.3(Overlap)	-	200	-
Cl-8.1(Dimensions -length)	-	200	-
Cl-8.2(Thickness of the plywood boards)	-	200	-
Cl-8.3(Squareness)	-	2000	-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	1500	-
Cl-11.3.2(Mycological Test)	-	1500	-
Cl-11.4(Moisture Content)	-	1000	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	1500	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	1500	-
Cl-11.6(Formaldehyde Content Test)	-	3000	-

07 Sep, 2028

-
Included w.e.f. 30.10.2024 Exclusion Cl-11.7 (Steady-State Formaldehyde Emission Test)

10331

The Synthetic and Art Silk Mills' Research Association (SASMIRA), MUMBAI

7175004

IS 18482 (2023)

Textiles - Sandwich extrusion laminated polypropylene PP woven sacks for packaging bulk commodities - Specification

30700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Sack Type)	-	400	-
5.2.1(Fabric)	-	400	-
5.2.2(Linear density of tapes)	-	400	-
5.2.4(Unlaminated fabric mass)	-	400	-
5.3.1.1.1(Mass of BOPP film in sandwich extrusion lamination)	-	400	-
5.3.1.1.2(Polypropylene coating mass for sandwich extrusion lamination of BOPP film with base PP woven fabric)	-	400	-
5.3.1.1.3(Total mass of BOPP film laminated woven fabric)	-	600	-
5.3.1.2.1(Mass of nonwoven fabric in sandwich extrusion lamination)	-	400	-
5.3.1.2.2(Polypropylene coating mass for sandwich extrusion lamination of non woven fabric with base PP woven fabric)	-	400	-
5.3.1.2.3(The total mass of nonwoven laminated woven fabric)	-	600	-
5.4.1(Sack)	-	400	-
5.4.1.1(Centre seam)	-	400	-
5.4.1.2(Bottom seam)	-	400	-
5.4.2(Sack)	-	1200	length, width, gusset, overlap width, bottom fold, dotted line over bottom fold
5.4.3(Sack)	-	200	-
5.4.5(Liner)	-	200	-
6.1.1, Table 1(Inside length)	-	200	-
6.1.1, Table 1(Inside width)	-	200	-
6.1.1, Table 1(Gusset width)	-	200	-
6.1.1, Table 1(Warp per dm)	-	200	-
6.1.1, Table 1(Weft per dm)	-	200	-
6.1.1, Table 1(Mass of laminated fabric)	-	400	-
6.2, Table 1(Average breaking strength - Lengthwise)	-	1000	-
6.2, Table 1(Average breaking strength - Widthwise)	-	1000	-
6.2, Table 1(Breaking strength of bottom seam)	-	1000	-
6.2, Table 1(Breaking strength of centre seam)	-	1000	-
6.2, Table 1(Average elongation at break of fabric - Lengthwise)	-	0	-
6.2, Table 1(Average elongation at break of fabric - Widthwise)	-	0	-
6.3(Average breaking strength - Lengthwise after UV exposure)	-	13000	Exposure charges + breaking charges. Total exposure charges Rs. 12000 for 192 hours + Rs 1000 breaking charges
6.3(Average breaking strength - Widthwise after UV exposure)	-	1000	-
6.4(Drop Impact Testing of Filled Sacks)	-	1000	-
Clause 5.4.5.3("Free from pin holes (except for air removal perforations), patches, tears, blisters, and any other visible defects")	-	100	-
Clause 6.2.2(Stitch strength)	-	1000	-
Clause 6.2.2(Weld seam strength)	-	1000	-
Clause 5.4.5.3("Free from pin holes (except for air removal perforations), patches, tears, blisters, and any other visible defects")	-	100	-
Clause 6.2.2(Stitch strength)	-	0	-
Clause 6.2.2(Weld seam strength)	-	0	-
Clause 6.5 Table 1 viii(Ash content)	-	900	-

14 Dec, 2026

-
-

10332

Elutech Laboratory and Calibration Services, Jaipur

9179806

IS 303 (2024)

Plywood for General Purposes â Specification (Fourth Revision)

Grade - MR, BWR & BWP, Type – AA, AB & BB. E1 & E2

9100 View breakup
For BWR Grade - Rs. 9,100/- BWP Grade – Rs. 8,900/- MR Grade – Rs. 6,900/- (Excluding Raw Materials Testing) 10 % discount to BIS.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Classification by appearance)	-	300	Testing Charges (excluding raw material) for BWR Grade Rs 9100, BWP Grade Rs 8900, MR Grade Rs 6900.
Cl-5.2, Table- 1 (i)(Blister)	-	0	10 % discount to BIS GSTIN extra as per Government Rule
Cl-5.2, Table- 1 (ii)(Checks)	-	0	10 % discount to BIS GSTIN extra as per Government Rule
Cl-5.2, Table- 1 (iii)(Discolouration)	-	0	10 % discount to BIS GSTIN extra as per Government Rule
Cl-5.2, Table- 1 (iv)(Dote)	-	0	10 % discount to BIS GSTIN extra as per Government Rule
Cl-5.2, Table- 1 (v)(Insect hole)	-	0	10 % discount to BIS GSTIN extra as per Government Rule
Cl-5.2, Table- 1 (vi)(Joints)	-	0	10 % discount to BIS GSTIN extra as per Government Rule
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	0	10 % discount to BIS GSTIN extra as per Government Rule
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	0	10 % discount to BIS GSTIN extra as per Government Rule
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	0	10 % discount to BIS GSTIN extra as per Government Rule
Cl-5.2, Table- 1 (x)(Knots (tight))	-	0	10 % discount to BIS GSTIN extra as per Government Rule
Cl-5.2, Table- 1 (xi)(Patches)	-	0	10 % discount to BIS GSTIN extra as per Government Rule
Cl-5.2, Table- 1 (xii)(Splits)	-	0	10 % discount to BIS GSTIN extra as per Government Rule
Cl-5.2, Table- 1 (xiii)(Swirl)	-	0	10 % discount to BIS GSTIN extra as per Government Rule
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	300	10 % discount to BIS GSTIN extra as per Government Rule
Cl-8.1(Dimensions -length)	-	100	10 % discount to BIS GSTIN extra as per Government Rule
Cl-8.2(Thickness of the plywood boards)	-	100	10 % discount to BIS GSTIN extra as per Government Rule
Cl-8.3(Squareness)	-	200	10 % discount to BIS GSTIN extra as per Government Rule
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	3000	3000 for BWR Grade, 2800 for BWP Grade, 800 for MR Grade.10 % discount to BIS
Cl-11.3.2(Mycological Test)	-	1900	10 % discount to BIS GSTIN extra as per Government Rule
Cl-11.4(Moisture Content)	-	400	10 % discount to BIS GSTIN extra as per Government Rule
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	500	10 % discount to BIS GSTIN extra as per Government Rule
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	500	10 % discount to BIS GSTIN extra as per Government Rule
Cl-11.6(Formaldehyde Content Test)	-	2000	10 % discount to BIS GSTIN extra as per Government Rule
Cl-11.7(Steady-State Formaldehyde Emission Test)	-	0	Optional Test as per cl 11.7 of IS 303: 2024
Cl-6.1(Timber)	-	0	10 % discount to BIS GSTIN extra as per Government Rule
Cl-6.2(Adhesive)	-	7800	Resin testing charges extra from IS 303 for BWP Grade Rs 7800, BWR Rs 7800 and MR Rs 7000
Cl-7.2.1(Thickness of veneers)	-	500	Rs 100 for thickness of veneer and Rs 400 for moisture of veneer
Cl-7.2.3(Grain Direction)	-	0	10 % discount to BIS GSTIN extra as per Government Rule
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	0	10 % discount to BIS GSTIN extra as per Government Rule
Cl-7.2.5.2(Splits)	-	0	10 % discount to BIS GSTIN extra as per Government Rule
Cl-7.2.5.3(Overlap)	-	0	10 % discount to BIS GSTIN extra as per Government Rule

26 Aug, 2027

-
Exclusion: Cl-11.7 (Steady-State Formaldehyde Emission Test) Optional Test as per cl 11.7 of IS 303: 2024

10333

IDMA LABORATORIES LIMITED, PANCHKULA

9123236

IS 5295 (2023)

Ethylene Glycol - Specification (Third Revision)

General and Fibre Grade

20600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1("Description IS 5295 : 2023 ")	-	600	Total testing charges for Fiber Grade are Rs. 20600/- Total testing charges for General Grade Rs. 14600/-
4.2Table 1 (i)("Colour IS 5295 : 2023 ")	-	1000	-
4.2Table 1 (ii)("Relative density at 20 °C/20 °C (IS 1448 (Part 167)")	-	1000	-
4.2Table 1 (iii)(a) Initial boiling point)	-	3500	Testing charges already mentioned are Rs. 3500/-
4.2Table 1 (iii)(b) The temperature at which 95 ml of material shall distil)	-	0	Testing charges already mentioned above i.e. Rs. 3500/-
4.2Table 1 (iv)("Moisture content 1448 (Part 175) / 1448(Part 182) ")	-	1500	-
4.2Table 1 (v)("Acidity (as acetic acid) IS 5295 : 2023 ")	-	1000	-
4.2Table 1 (vi)("Ultra-Violet transmittance in 1 cm cell at IS 5295 : 2023 ")	-	2500	Testing charges for Ultra violet transmittance are 2500/-
4.2Table 1 (vi)(a) 220 nm)	-	0	Testing charges already mentioned above i.e. Rs 2500/-
4.2Table 1 (vi)(b) 275 nm)	-	0	Testing charges already mentioned above i.e. Rs 2500/-
4.2Table 1 (vi)(c) 350 nm)	-	0	Testing charges already mentioned above i.e. Rs 2500/-
4.2Table 1 (vii)("Freezing point of equal volumes of material and water IS 5295 : 2023 ")	-	3500	-
4.2Table 1 (viii)("Iron content IS 5295 : 2023 ")	-	1500	-
4.2Table 1 (ix)("Chlorides content IS 5295 : 2023 ")	-	1500	-
4.2Table 1 (x)("Purity IS 5295 : 2023 ")	-	2500	-
4.2Table 1 (xi)("Diethylene glycol content IS 5295 : 2023 ")	-	2000	-
4.2Table 1 (xii)("Aldehyde (as HCHO) IS 5295 : 2023 ")	-	2000	-
4.1(Material shall be colourless)	-	0	Testing charges already mentioned above
4.2Table 1 (iii)("Distillation range at 760 mmHg IS 5298")	-	0	Testing charges already mentioned above
4.2-Table 1-i)(Colour, Pt-Co, Max)	-	0	Testing charges already mentioned above
4.2-Table 1-ii)(Relative density1) at 20 °C/20 °C)	-	0	Testing charges already mentioned above
4.2-Table 1-iii)(Distillation range at 760 mmHg: a) Initial boiling point, °C Min b) The temperature at which 95 ml of material shall distil, °C, Max)	-	0	Testing charges already mentioned above
4.2-Table 1-iv)(Moisture content, percent by mass, Max)	-	0	Testing charges already mentioned above
4.2-Table 1-v)(Acidity (as acetic acid), ppm, Max)	-	0	Testing charges already mentioned above
4.2-Table 1-vi)(Ultra-Violet transmittance in 1 cm cell at a) 220 nm, Min b) 275 nm, Min c) 350 nm, Min )	-	0	Testing charges already mentioned above
4.2-Table 1-vii)(Freezing point of equal volumes of material and water, Max)	-	0	Testing charges already mentioned above
4.2-Table 1-viii)(Iron content, ppm, Max)	-	0	Testing charges already mentioned above
4.2-Table 1-ix)(Chlorides content (as Cl), ppm, Max)	-	0	Testing charges already mentioned above
4.2-Table 1-x)(Purity, percent, Min)	-	0	Testing charges already mentioned above
4.2-Table 1-xi)(Diethylene glycol content, ppm, Max)	-	0	Testing charges already mentioned above
4.2-Table 1-xii)(Aldehyde (as HCHO), ppm, Max)	-	0	Testing charges already mentioned above
6.1(Packing)	-	0	NA
6.2(Marking)	-	0	NA

31 Dec, 2029

-
Included w.e.f.07.11.2024

10334

Rajkot Metlab Services LLP, Rajkot

7183706

IS 14650 (2023)

UNALLOYED AND ALLOYED STEEL INGOT AND SEMI-FINISHED PRODUCTS FOR RE-ROLLING PURPOSES - SPECIFICATION (First Revision)

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause - 7.1(CARBON)	-	200	-
Clause - 7.1(SULPHUR)	-	200	-
Clause - 7.1(PHOSPHURS)	-	200	-
Clause - 7.1(MANGANESE)	-	200	-
Clause - 7.1(NITROGEN)	-	200	-
As per Clause 10(Dimension)	-	100	-
As per Clause 10.1(Dimension Width)	-	100	-
As per Clause 10.1(Dimension Thickness)	-	100	-
As per Clause 10.2(Dimension Length)	-	100	-
As per Clause 11/11.1/11.2/11.3/11.4(Tolerances)	-	100	-
As per Clause 11.5(Bend)	-	500	-
As per Clause 11.6(Camber)	-	100	-
As per Clause 11.7 (i)(Out of Square)	-	100	-
As per Clause 11.7 (ii)(Round Corners)	-	100	-
As per Clause 11.7 (iii)(Ridges due to gas cutting)	-	100	-
As per Clause 11.7 (iv)(Taper (Width variation on top and bottom surface at one location)	-	100	-
As per Clause 11.7 (v)(Edge slanting (Width variation on top and bottom surface at one location)	-	100	-
As per Clause 11.7 (vi)(Convexity(Difference in thickness from edge to curve)	-	100	-
As per Clause 11.7 (vii)(Chamfering (Length variation on top and bottom surface at one location)	-	100	-
As per Clause 11.7 (viii)(Wedge (Thickness variation at the edges along the cross section)	-	100	-
As per Clause 11.7 (ix)(Scarfing pits)	-	100	-
As per Clause 12/12.1/12.2/12.3(Freedom from defects)	-	100	-
Clause. 13(Macro examination test.)	-	800	-
Clause. 13(Macro examination test.)	-	800	-
Clause. 13(Sulphur print.)	-	1500	-
Clause. 13(Inclusion content)	-	800	-
Clause. 14(Marking)	-	100	-
Clause.15(Ordering information)	-	100	-
Clause.6.0(Manufacture)	-	100	-
Clause.7.1(Silicon)	-	200	-
Clause.7.1(Carbon Equbalant)	-	200	-
Clause.7.1(Microalloy element)	-	1500	-

12 Jan, 2028

-
Exclusion: Cl.13., 1b (Sulphur print test)

10335

The Synthetic and Art Silk Mills' Research Association (SASMIRA), MUMBAI

7175004

IS 17399 (2020)

Textiles - Polypropylene ( PP )/ High Density Polyethylene ( HDPE ) Laminated Woven Sacks for Mail Sorting, Storage, Transport and Distribution - Specification

21050 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(MANUFACTURE - Raw Materials)	-	2500	Inclusive of FTIR analysis for identifciation
5.2(MANUFACTURE - Fabric for PP tapes & for HDPE tapes)	-	400	-
5.2- Table 1- i)("REQUIREMENTS - Inside dimensions a) Bottom panel (L × W), mm b) Open top (L × W), mm c) Height (H), mm")	-	400	-
5.2- Table 1- ii)(REQUIREMENTS - Ends per dm)	-	200	-
5.2- Table 1- iii)(REQUIREMENTS - Picks per dm)	-	200	-
5.2- Table 1- iv)(REQUIREMENTS - Mass of laminated sack, g)	-	500	-
5.2- Table 1- v)(REQUIREMENTS - Breaking strength of laminated fabric (Cut strip method1)), Min, N2) (kgf) a) Lengthwise b) Widthwise)	-	1000	-
5.2- Table 1- vi)(REQUIREMENTS - Seam strength of bottom and side panel seam (Cut strip method), Min, N2), (kgf))	-	1000	-
5.2- Table 1- vii)("REQUIREMENTS - Elongation at break of fabric, percent: a) Lengthwise b) Widthwise")	-	0	-
5.2- Table 1- viii)(REQUIREMENTS - Ash content, Max, percent (a) For UV stabilized sacks (b) For non-UV stabilized sacks)	-	950	-
5.3(Lamination)	-	400	-
5.4(Sack Fabrication)	-	1000	-
5.5(Capacity)	-	400	-
6.1- Table 1- i)(REQUIREMENTS - Inside dimensions a) Bottom panel (L × W), mm b) Open top (L × W), mm c) Height (H), mm)	-	0	-
6.1- Table 1- ii)(REQUIREMENTS - Ends per dm)	-	0	-
6.1- Table 1- iii)(REQUIREMENTS - Picks per dm)	-	0	-
6.1- Table 1- iv)(REQUIREMENTS - Mass of laminated sack, g)	-	0	-
6.1- Table 1- v)(REQUIREMENTS - Breaking strength of laminated fabric (Cut strip method1)), Min, N2) (kgf))	-	0	-
6.1- Table 1- vi)(REQUIREMENTS - Seam strength of bottom and side panel seam (Cut strip method), Min)	-	0	-
6.1- Table 1- vii)(REQUIREMENTS - Elongation at break of fabric, percent a) Lengthwise b) Widthwise)	-	0	-
6.1- Table 1- viii)(REQUIREMENTS - Ash content, Max, percent (a) For UV stabilized sacks (b) For non-UV stabilized sacks)	-	0	-
6.4(UV Resistance Test)	-	12000	-
7(PRINTING, PACKAGING AND MARKING)	-	400	-
8(ATMOSPHERIC CONDITIONS FOR SAMPLE CONDITIONING AND TESTING)	-	0	-
Clause 5.1(Raw Materials)	-	0	-
"Clause 5.2 Table 1(i)"(Inside dimensions)	-	0	-
"Clause 5.2 Table 1(i)"(Inside dimensions)	-	0	-
"Clause 5.2 Table 1(ii)"(Ends per dm)	-	0	-
"Clause 5.2 Table 1(iii)"(Picks per dm)	-	0	-
"Clause 5.2 Table 1(iv)"("Mass of laminated sack, g")	-	0	-
"Clause 5.2 Table 1(v)"("Breaking strength of laminated fabric")	-	0	-
"Clause 5.2 Table 1(vi)"(Seam strength of bottom and side panel seam)	-	0	-
"Clause 5.2 Table 1(vii)"("Elongation at break of fabric, percent:")	-	0	-
"Clause 5.2 Table 1(viii)"("Ash content, Max, percent")	-	0	-
Clause 5.3(Lamination with a thin film of polypropylene)	-	0	-
Clause 5.4(Sack Fabrication)	-	0	-
Clause 7.3(Marking on Sacks)	-	0	-
Clause 5.1(Raw Materials)	-	0	-
"Clause 5.2 Table 1(i)"(Inside dimensions)	-	0	-
"Clause 5.2 Table 1(ii)"(Ends per dm)	-	0	-
"Clause 5.2 Table 1(iii)"(Picks per dm)	-	0	-
"Clause 5.2 Table 1(iv)"("Mass of laminated sack, g")	-	0	-
"Clause 5.2 Table 1(v)"("Breaking strength of laminated fabric")	-	0	-
"Clause 5.2 Table 1(vi)"(Seam strength of bottom and side panel seam)	-	0	-
"Clause 5.2 Table 1(vii)"("Elongation at break of fabric, percent:")	-	0	-
"Clause 5.2 Table 1(viii)"("Ash content, Max, percent")	-	0	-
Clause 5.3(Lamination with a thin film of polypropylene)	-	0	-
Clause 7.3(Marking on Sacks)	-	0	-

14 Dec, 2026

-
-

10336

TUV SUD SOUTH ASIA PRIVATE LIMITED, BENGALURU

6180126

IS 13252 : Part 1 (2010)

Information technology equipment - Safety: Part 1 general requirements (Second Revision)

Information technology equipment

160000 View breakup
Rs.1,60,000/- (10% Discount)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1.5(Components)	-	5000	10% discount to BIS
1.6(Power interface .)	-	2000	10% discount to BIS
1.7(Markings and instructions)	-	3000	10% discount to BIS
2.1(Protection from electric shock and energy hazards)	-	16500	10% discount to BIS
2.2(SELV circuits)	-	4500	10% discount to BIS
2.3(TNV circuits)	-	14000	10% discount to BIS
2.4(Limited current circuits)	-	2000	10% discount to BIS
2.5(Limited power sources .)	-	2500	10% discount to BIS
2.6(Provisions for earthing and bonding)	-	2500	10% discount to BIS
2.7(Overcurrent and earth fault protection in primary circuits)	-	2000	10% discount to BIS
2.8(Safety interlocks)	-	2500	10% discount to BIS
2.9(Electrical insulation)	-	2000	10% discount to BIS
2.10(Clearances, creepage distances and distances through insulation)	-	8500	10% discount to BIS
2.10.9(Thermal Cycling)	-	0	-
2.10.10(Test for Pollution Degree 1 environment and for insulating compound)	-	0	-
2.10.11(Tests for semiconductor devices and for cemented joints)	-	0	-
2.10.12(Enclosed and sealed parts)	-	0	-
3.1(General)	-	2000	10% discount to BIS
3.2(Connection to a mains supply)	-	4000	10% discount to BIS
3.3(Wiring terminals for connection of external conductors)	-	1500	10% discount to BIS
3.5(Interconnection of equipment)	-	1500	10% discount to BIS
4.1(Stability)	-	2000	10% discount to BIS
4.2(Mechanical strength)	-	14000	10% discount to BIS
4.3(Design and construction)	-	8000	10% discount to BIS
4.4(Protection against hazardous moving parts)	-	2000	10% discount to BIS
4.5(Thermal requirements)	-	3000	10% discount to BIS
4.6(Openings in enclosures)	-	2000	10% discount to BIS
4.7(Resistance to fire)	-	2000	10% discount to BIS
5.1(Touch current and protective conductor curren)	-	2000	10% discount to BIS
5.2(Electric strength)	-	4000	10% discount to BIS
5.3(Abnormal operating and fault conditions)	-	3000	10% discount to BIS
6.1(Protection of telecommunication network service persons, and users of other equipment connected to the network, from hazards in the equipment)	-	3000	10% discount to BIS
6.2(Protection of equipment users from overvoltages on networks telecommunication)	-	3000	10% discount to BIS
6.3(Protection of the telecommunication wiring system from overheating)	-	3000	10% discount to BIS
7.4(Insulation between primary circuits and cable distribution systems)	-	3000	10% discount to BIS
Annex A3(Hot flaming oil test)	-	5000	10% discount to BIS
Annex B(Motor tests under abnormal conditions)	-	4000	10% discount to BIS
Annex C(Transformers)	-	4000	10% discount to BIS
Annex DD(Requirements for the mounting means of a rack mounted equipment)	-	2000	10% discount to BIS
Annex CC(Evaluation of integrated circuit (IC) current limiters)	-	2000	10% discount to BIS
Annex EE(Household and home/ office document/ media shredders)	-	2000	10% discount to BIS
4.6.2(Bottoms of fire enclosures)	-	0	10% discount to BIS
3.4(Disconnection from the mains supply)	-	1500	10% discount to BIS
7.1(General)	-	500	10% discount to BIS
7.2(Protection of cable distribution system service persons, and users of other equipment connected to the system, from hazardous voltages in the equipment)	-	3000	10% discount to BIS
7.3(Protection of equipment users from overvoltages on the cable distribution system)	-	4000	10% discount to BIS
2.10.4.2(Material Group and Comparative Tracking Index)	-	0	-
2.10.5.3(Insulating Compound as Solid Insulation)	-	0	-
2.10.5.6(Thin sheet materials)	-	0	-
2.10.5.11(SMPS Transformer and Inductor)	-	0	-
2.10.5.12(Wires in wound components)	-	0	-
2.10.5.13(Winding wire)	-	0	-
2.10.5.14(Additional insulation in wound components)	-	0	-
2.10.6(PCB material)	-	0	-
2.10.8.2(Thermal conditioning (thermal ageing))	-	0	-
2.10.8.4(Abrasion resistance test)	-	0	-
3.1.4(Internal wire)	-	0	-
3.2.4(Appliance inlet /connector)	-	0	-
3.2.4(Appliance inlet /connector)	-	0	-
3.2.5(Non re-wirable plug with PVC sheathed cable)	-	0	-
4.3.8(Batteries)	-	0	-
4.3.10(Dust, powders, liquids and gases)	-	0	-
4.3.11(Containers for liquids or gases)	-	0	-
1.5(Components)	-	0	-

11 Sep, 2027

-
Exclusion: Cl.2.10.5.4 (Semiconductor devices), Cl. 2.8.2 (Interlock switches) Cl.2.8.5 (Moving parts), Cl.2.8.7 (Switches & Relays), Cl.4.2.8 (Cathode Ray Tube), Cl.4.2.9 (High pressure lamps), Cl.4.3.12 (Flammable liquids), Cl.4.3.13 (Radiation), Annex K (Thermal Controls), Annex Q (Voltage dependent Resistors (VDRs)), Annex U (Insulated winding wires)

10337

Delta Testing and Research Laboratories Private Limited (Unit II)

8186836

IS 13395 (2021)

Performance of Handles and Handle Assemblies Attached to Cookware - Specification ( First Revision )

All Grade / Type / Size / Designation

9500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1()	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1(Construction)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.2(Materials)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.3(Selection and Size)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.4(Position of handle and knob with respect to cookware)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.()	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.5(Attachment to cookware)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.()	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1(General)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.2(Bending strength)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.3(Torque strength)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.4(Impact strength)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.5(Fatigue resistance)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.6(Leakage)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.7(Thermal insulation)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.8(Heat resistance)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.9(Washing resistance)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.10(Burning resistance)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

24 Jul, 2028

-
-

10338

Delta Testing and Research Laboratories Private Limited (Unit II)

8186836

IS 4246 (2002)

Domestic gas stoves for use with liquefied petroleum gases - Specification (Fifth Revision)

All Grade / Type / Size / Designation

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
30(Packing)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
29(Marking)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
27.2(Routine Tests)	-	6000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
27.1(Type Tests)	-	8000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
26(Thermal Efficiency)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
24(Combustion)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
23(Resistance to Draught)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
22(Formation of Soot)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
21(Flash Back)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
20(Noise Control)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
19(Flame Stability)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
18(Ignition and Flame Travel)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
17.1.1(Gas Consumption)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
16(General Conditions of Test)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
15(Strength and Rigidity)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
14(Gas Inlet Connections)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
13.2(Gas Leak Detector)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
13.1(Gas Soundness)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
12(Burner Pan Supports)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
11(Burners)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
25(Fire Hazard and Limiting Temperature)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10(Injector Jets)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9(Gas Taps)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8(Workmanship and Finish)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7(Rigidity and Stability)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6(Design for Maintenance)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5(Materials)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1(Requirement)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
24 (Annex - E)(Combustion (CO and CO2 ratio))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.23(There shall be no extinction of the flames on any of the burners operating at maximum consumption when the appliance is placed in a general (not localized) current of air with a velocity of 2 m/s, as measured with a rotating vane anemometer. The location of the appliance relative to neighboring walls and the direction of the draught shall be varied to correspond to likely conditions of appliance installation. This applies for all pressures from 2452 kN/m2 to 3432 kN/m2 (25 gf/cm2 to 35 gf/cm2).)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.24(Annexure E)(on no account the carbon monoxidel carbon dioxide ratio of the exhaust gases of any burner. operating at any consumption at which the burner is stable at gas inlet pressure from 2452 kN/m2 to 3432 kN/m2 (25 gf/cm2 to 35 gf/cm2), exceed 0.02.)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

24 Jul, 2028

-
-

10339

Delta Testing and Research Laboratories Private Limited (Unit II)

8186836

IS 2347 (2023)

DOMESTIC PRESSURE COOKER ï¿½ SPECIFICATION

All Grade / Type / Size / Designation

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Gross capacity)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
4.2(Body Capacity)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
5.1(Body, Lid, Containers and Grid)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
5.1.2(Body and Lid )	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
5.1.3(Stainless steel pressure cooker)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
5.1.4(Aluminium cooker )	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
5.2(Safety Relief Device)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
5.3(Gasket)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
5.4(Handles and Knobs)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
5.5(Pressure Regulating Device )	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
5.6(Vent Seal Pin for Pressure Regulating Device )	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
5.7(Vent Pipe )	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
5.8(Vent Pipe Nut )	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
5.9(Spring )	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
5.1(Material of Rim )	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
5.11(Visual Pressure Indicator)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
5.12(Gasket Release System)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
6(Construction)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
7(Workmanship and Finish )	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
8.1(Air Pressure Test )	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
8.2(Proof Pressure Test )	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
8.3(Operating Test for Pressure Regulating Device )	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
8.4(Test for Safety Relief Device )	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
8.5(Bursting Pressure Test )	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
8.6(Test for Removal of Lid under Pressure )	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
8.7(Test for Spring Loaded Mechanism )	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
8.8(Composite Cooker Base )	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
8.9(Aluminium induction compatible Base )	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
8.1(Handles of cooker )	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
8.11(External Coating)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
8.12(Internal Coating )	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
8.13(Integral electrical heating)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
8.14(Ply construction cooker Body )	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
8.15.1(Fragmentation Test )	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
8.15.2(Ball Drop Test )	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
8.15.3(Thermal Shock Test )	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
8.15.4(Free Fall Test)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
8.17(Test for Effectiveness for Induction Bottom)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
11(Marking )	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
12(Packing )	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
4(Capacity)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
4.2(Body Capacity)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
5.1.1(Body, Lid, Containers and Grid)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
5.1.2(Body, Lid, Containers and Grid)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
5.1.3(Body, Lid, Containers and Grid)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
5.1.4(Body, Lid, Containers and Grid)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
5.1.5(Body, Lid, Containers and Grid)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
5.2.1(Destructive Type Safety Relief Device)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
5.2.2(Resettable Type Safety Relief Device)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
5.3(Gasket)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
5.4(Handles and Knobs)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
5.5(Pressure Regulating Device)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
5.6(Vent Seal Pin for Pressure Regulating Device)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
5.7(Vent Pipe)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
5.8(Vent Pipe Nut)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
5.9(Spring)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
5.10(Spring)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
5.11(Visual Pressure Indicator)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
5.12(Gasket Release System)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
6(CONSTRUCTION)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
6.1(Pressure Regulating Device)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
6.1.1(Pressure Regulating Device)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
6.1.1(Minimum Inside diameter of Vent Pipe.)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
6.1.2(Pressure Regulating Device)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
6.1.3(Pressure Regulating Device)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
6.1.4(Pressure Regulating Device)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
6.1.5(Pressure Regulating Device)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
6.1.6(Pressure Regulating Device)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
6.2(Safety Relief Device)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
6.2.1(Safety Relief Device)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
6.2.2(Safety Relief Device)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
6.2.3(Safety Relief Device)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
6.3.1(Temperature Responsive Safety Relief Device)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
6.3.2(Temperature Responsive Safety Relief Device)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
6.3.3(Temperature Responsive Safety Relief Device)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
6.4.1(Handles and Knobs)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
6.4.1.1(Handles and Knobs)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
6.4.2(Handles and Knobs)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
6.4.2.1(Handles and Knobs)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
6.5(CONSTRUCTION)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
6.6(CONSTRUCTION)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
6.7(Internal Level Marking)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
6.8(Internal Level Marking)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
7.1(WORKMANSHIP AND FINISH)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
7.2(WORKMANSHIP AND FINISH)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
8.17(Test for Effectiveness for Induction Bottom)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
8.16(PRD with chain)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
8.15.4.2(Glass lid without rim)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
8.15.4.1("Free Fall Test ( Glass lid with rim) ")	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
8.15.3(Thermal Shock Test on Tempered Glass lid)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
8.15.2(Ball Drop Test on Tempered Glass lid)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
8.15.1(Fragmentation Test on Tempered Glass lid)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
8.14(3 ply construction cooker body)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
8.13(Pressure cooker with integral electrical heating)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
8.12(Internal Coating)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
7.3(WORKMANSHIP AND FINISH)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
7.4(WORKMANSHIP AND FINISH)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
8.1(Air Pressure Test)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
8.2(Proof Pressure Test)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
8.3.1(Operating Test for Pressure Regulating Device)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
8.4.1(Test for Safety Relief Device)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
8.4.2(Test for Safety Relief Device)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
8.4.2 NOTE(Test for Safety Relief Device)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
8.5(Bursting Pressure Test)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
8.6.1(Tests for Removal of Lid under Pressure For Outer Lid Cooker)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
8.6.2(Tests for Removal of Lid under Pressure For inner Lid Cooker)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
8.6.3(Tests for Removal of Lid under Pressure: For Cooker Fastened by Screw Clamps or Any Other Locking Device)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
8.6.4(Tests for Removal of Lid under Pressure in case of electrical pressure cooker)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
8.7(Test for Spring Loaded Mechanism)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
8.8(Test for stainless steel cookers)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
8.9("For stainless steel, aluminium induction compatible base and 3 ply cooker")	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
8.10(Testing of Handles of the cooker)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
8.10 Note 3(Testing of Handles of the cooker)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
8.10 Note 4(Testing of Handles of the cooker)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
8.10 Note 5(Testing of Handles of the cooker)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
8.10 Note 6(Testing of Handles of the cooker)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
8.10.1(Testing of Handles of the cooker)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.
8.11.1(External Coating)	-	400	10% Discount for BIS and for others 1.5 times of mentioned testing charges.

24 Jul, 2028

-
-

10340

Delta Testing and Research Laboratories Private Limited (Unit II)

8186836

IS 9562 (1980)

Specification for non - Metal helmet for police force

All Grade / Type / Size / Designation

20500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 3(Shell, Protective padding & Retention System)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 4.1(Size Of Helmet)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 5( Shell, Protective Padding, Brim, Head band, Chin Strap, Cradle, Neck Protector & Visor)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6(Workmanship & Finish)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 7(Mass)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9(Shock absorption test, Penitration resistance, Strength of Retention system, Rigidity test, Water Absorption, Flammability resistance & Firing Test)	-	15500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9(Shock absorption test, Penitration resistance, Strength of Retention system, Rigidity test, Water Absorption, Flammability resistance & Firing Test)	-	15500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 7(Mass)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6(Workmanship & Finish)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 5( Shell, Protective Padding, Brim, Head band, Chin Strap, Cradle, Neck Protector & Visor)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 4.1(Size Of Helmet)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 3(Shell, Protective padding & Retention System)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

24 Jul, 2028

-
Cl.9 (Firing Test)

10341

Delta Testing and Research Laboratories Private Limited (Unit II)

8186836

IS 2925 (1984)

Specification for industrial safety helmets (Second Revision)

All Grade / Type / Size / Designation

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.6(Performance Requirements)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.5(Performance Requirements)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.4(Performance Requirements)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.3(Performance Requirements)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.2(Performance Requirements)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.1(Performance Requirements)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1(Construction)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(Construction)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.5(Construction)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.4(Construction)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.3(Construction)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.2(Construction)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1(Construction)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1(Sizes)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.3(Material)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.2(Material)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3.1(Material)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

24 Jul, 2028

-
-

10342

Delta Testing and Research Laboratories Private Limited (Unit II)

8186836

IS 2745 (1983)

Specification for non - Metal helmet for firemen and civil defence personnel (Second Revision)

All Grade / Type / Size / Designation

21500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 3(Shell, Protective padding, Retention System & Neck protector)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 4.1(Size Of Helmet)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 5( Shell, Protective Padding, Brim, Head band, Chin Strap, Cradle, Neck Protector & Visor)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6(Workmanship & Finish)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 7(Mass)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9(Shock absorption test, Penitration resistance, Strength of Retention system, Electrical resistance, Water Absorption & Flammability resistance)	-	17500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9(Shock absorption test, Penitration resistance, Strength of Retention system, Electrical resistance, Water Absorption & Flammability resistance)	-	17500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 7(Mass)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6(Workmanship & Finish)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 5( Shell, Protective Padding, Brim, Head band, Chin Strap, Cradle, Neck Protector & Visor)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 4.1(Size Of Helmet)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 3(Shell, Protective padding, Retention System & Neck protector)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

24 Jul, 2028

-
-

10343

Applications Research and Development Centre, Haldia Petrochemicals Limited, Kolkata

5174906

IS 10951 (2020)

Specification for Polypropylene ( PP ) Materials for Moulding and Extrusion ( Second Revision )

Polypropylene materials for Moulding and Extrusion

31800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 3.5.1,Table-3 or Clause 6.2.1.1(Melt Mass Flow-Rate (MFR) or Melt Flow Index,g/10min,IS 13360 (Part 4/Sec 1)/ASTM D1238)	-	1500	The testing charge is in INR and for one sample. The testing charge may be revised as decided by the laboratory management.
Clause 3.5.2,Table-4 or Clause 6.2.1.2(Flexural Modulus,Mpa,IS 13360 (Part 5/ Sec 7),ASTM D790)	-	2000	The testing charge is in INR and for one sample. The testing charge may be revised as decided by the laboratory management.
Clause 3.5.3,Table-5 or Clause 6.2.1.3(Izod Impact Strength,J/m,IS 13360 (Part 5/Sec 4)/ASTM D256)	-	2000	The testing charge is in INR and for one sample. The testing charge may be revised as decided by the laboratory management.
Clause 6.3.2,Table-8, Sl no.1(Tensile yield strength, Mpa,IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 2))	-	2000	The testing charge is in INR and for one sample. The testing charge may be revised as decided by the laboratory management.
Clause 6.3.2,Table-8, Sl no.1(Elongation at yield, %, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 2))	-	2000	The testing charge is in INR and for one sample. The testing charge may be revised as decided by the laboratory management.
Clause 6.3.2,Table-8, Sl no.1(Tensile strength at break, Mpa, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 2))	-	2000	The testing charge is in INR and for one sample. The testing charge may be revised as decided by the laboratory management.
Clause 6.3.2,Table-8, Sl no.1(Elongation at break, percent, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 2))	-	2000	The testing charge is in INR and for one sample. The testing charge may be revised as decided by the laboratory management.
Clause 6.3.2,Table-8, Sl no.2(Melting temperature,ᴼC,IS 13360 (Part 6/Sec 10))	-	5000	The testing charge is in INR and for one sample. The testing charge may be revised as decided by the laboratory management.
Clause 6.3.2,Table-8, Sl no.2(Temperature of deflection under load,°C,IS 13360 (Part 6/ Sec 3),IS 13360 (Part 6/ Sec 17))	-	2000	The testing charge is in INR and for one sample. The testing charge may be revised as decided by the laboratory management.
Clause 6.3.2,Table-8, Sl no.2(Vicat softening temperature, ᴼC,S 13360 (Part 6/Sec 1))	-	2000	The testing charge is in INR and for one sample. The testing charge may be revised as decided by the laboratory management.
Clause 6.3.2,Table-8, Sl no.4(Density,kg/m3,IS 13360 (Part 3/ Sec 10),IS 13360 (Part 3/ Sec 11))	-	1500	The testing charge is in INR and for one sample. The testing charge may be revised as decided by the laboratory management.
Clause 6.4.2(Overall Migration, IS 9845, Annex D.2)	-	2500	The testing charge is in INR and for per simulant for one sample. The testing charge may be revised as decided by the laboratory management.
6.1(The material shall be uniform and free from foreign matter.)	-	200	The testing charge is in INR and for one sample. The testing charge may be revised as decided by the laboratory management.
Clause 6.4.1(All additives used in the material which is meant,for usage in contact with foodstuffs, pharmaceuticals,and drinking water are given in IS 16738 for guidance purpose only.)	-	500	The testing charge is in INR and for one sample. The testing charge may be revised as decided by the laboratory management.
Clause 3.5.1,Table-3 or Clause 6.2.1.1(Melt Mass Flow-Rate (MFR) or Melt Flow Index,g/10min,IS 13360 (Part 4/Sec 1)/ASTM D1238)	-	1500	The testing charge is in INR and for one sample. The testing charge may be revised as decided by the laboratory management.
Clause 3.5.2,Table-4 or Clause 6.2.1.2(Flexural Modulus,Mpa,IS 13360 (Part 5/ Sec 7),ASTM D790)	-	2000	The testing charge is in INR and for one sample. The testing charge may be revised as decided by the laboratory management.
Clause 3.5.3,Table-5 or Clause 6.2.1.3(Izod Impact Strength,J/m,IS 13360 (Part 5/Sec 4)/ASTM D256)	-	2000	The testing charge is in INR and for one sample. The testing charge may be revised as decided by the laboratory management.
Clause 6.3.2,Table-8, Sl no.1(Tensile yield strength, Mpa,IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 2))	-	2000	The testing charge is in INR and for one sample. The testing charge may be revised as decided by the laboratory management.
Clause 6.3.2,Table-8, Sl no.1(Elongation at yield, %, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 2))	-	2000	The testing charge is in INR and for one sample. The testing charge may be revised as decided by the laboratory management.
Clause 6.3.2,Table-8, Sl no.1(Tensile strength at break, Mpa, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 2))	-	2000	The testing charge is in INR and for one sample. The testing charge may be revised as decided by the laboratory management.
Clause 6.3.2,Table-8, Sl no.1(Elongation at break, percent, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 2))	-	2000	The testing charge is in INR and for one sample. The testing charge may be revised as decided by the laboratory management.
Clause 6.3.2,Table-8, Sl no.2(Melting temperature,ᴼC,IS 13360 (Part 6/Sec 10))	-	5000	The testing charge is in INR and for one sample. The testing charge may be revised as decided by the laboratory management.
Clause 6.3.2,Table-8, Sl no.2(Temperature of deflection under load,°C,IS 13360 (Part 6/ Sec 3),IS 13360 (Part 6/ Sec 17))	-	2000	The testing charge is in INR and for one sample. The testing charge may be revised as decided by the laboratory management.
Clause 6.3.2,Table-8, Sl no.2(Temperature of deflection under load,°C,IS 13360 (Part 6/ Sec 3),IS 13360 (Part 6/ Sec 17))	-	2000	The testing charge is in INR and for one sample. The testing charge may be revised as decided by the laboratory management.
Clause 6.3.2,Table-8, Sl no.2(Vicat softening temperature, ᴼC,S 13360 (Part 6/Sec 1))	-	2000	The testing charge is in INR and for one sample. The testing charge may be revised as decided by the laboratory management.
Clause 6.3.2,Table-8, Sl no.4(Density,kg/m3,IS 13360 (Part 3/ Sec 10),IS 13360 (Part 3/ Sec 11))	-	1500	The testing charge is in INR and for one sample. The testing charge may be revised as decided by the laboratory management.
Clause 6.4.1()	-	500	The testing charge is in INR and for one sample. The testing charge may be revised as decided by the laboratory management.
Clause 6.4.2(Overall Migration, IS 9845, Annex D.2)	-	2500	The testing charge is in INR and for per simulant for one sample. The testing charge may be revised as decided by the laboratory management.
Clause 3.5.1,Table-3 or Clause 6.2.1.1(Melt Mass Flow-Rate (MFR) or Melt Flow Index,g/10min,IS 13360 (Part 4/Sec 1)/ASTM D1238)	-	1500	The testing charge is in INR and for one sample. The testing charge may be revised as decided by the laboratory management.
Clause 3.5.2,Table-4 or Clause 6.2.1.2(Flexural Modulus,Mpa,IS 13360 (Part 5/ Sec 7),ASTM D790)	-	2000	The testing charge is in INR and for one sample. The testing charge may be revised as decided by the laboratory management.
Clause 3.5.3,Table-5 or Clause 6.2.1.3(Izod Impact Strength,J/m,IS 13360 (Part 5/Sec 4)/ASTM D256)	-	2000	The testing charge is in INR and for one sample. The testing charge may be revised as decided by the laboratory management.
Clause 6.3.2,Table-8, Sl no.1(Tensile yield strength, Mpa,IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 2))	-	2000	The testing charge is in INR and for one sample. The testing charge may be revised as decided by the laboratory management.
Clause 6.3.2,Table-8, Sl no.1(Elongation at yield, %, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 2))	-	2000	The testing charge is in INR and for one sample. The testing charge may be revised as decided by the laboratory management.
Clause 6.3.2,Table-8, Sl no.1(Tensile strength at break, Mpa, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 2))	-	2000	The testing charge is in INR and for one sample. The testing charge may be revised as decided by the laboratory management.
Clause 6.3.2,Table-8, Sl no.1(Elongation at break, percent, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 2))	-	2000	The testing charge is in INR and for one sample. The testing charge may be revised as decided by the laboratory management.
Clause 6.3.2,Table-8, Sl no.2(Melting temperature,ᴼC,IS 13360 (Part 6/Sec 10))	-	5000	The testing charge is in INR and for one sample. The testing charge may be revised as decided by the laboratory management.
Clause 6.3.2,Table-8, Sl no.2(Temperature of deflection under load,°C,IS 13360 (Part 6/ Sec 3),IS 13360 (Part 6/ Sec 17))	-	2000	The testing charge is in INR and for one sample. The testing charge may be revised as decided by the laboratory management.
Clause 6.3.2,Table-8, Sl no.2(Vicat softening temperature, ᴼC,S 13360 (Part 6/Sec 1))	-	2000	The testing charge is in INR and for one sample. The testing charge may be revised as decided by the laboratory management.
Clause 6.3.2,Table-8, Sl no.4(Density,kg/m3,IS 13360 (Part 3/ Sec 10),IS 13360 (Part 3/ Sec 11))	-	1500	The testing charge is in INR and for one sample. The testing charge may be revised as decided by the laboratory management.
Clause 6.4.2(Overall Migration, IS 9845, Annex D.2)	-	2500	The testing charge is in INR and for per simulant for one sample. The testing charge may be revised as decided by the laboratory management.
6.1(The material shall be uniform and free from foreign matter.)	-	200	The testing charge is in INR and for one sample. The testing charge may be revised as decided by the laboratory management.
Clause 6.4.1(All additives used in the material which is meant,for usage in contact with foodstuffs, pharmaceuticals,and drinking water are given in IS 16738 for guidance purpose only.)	-	500	The testing charge is in INR and for one sample. The testing charge may be revised as decided by the laboratory management.
Clause 3.5.1,Table-3 or Clause 6.2.1.1(Melt Mass Flow-Rate (MFR) or Melt Flow Index,g/10min,IS 13360 (Part 4/Sec 1)/ASTM D1238)	-	1500	The testing charge is in INR and for one sample. The testing charge may be revised as decided by the laboratory management.
Clause 3.5.2,Table-4 or Clause 6.2.1.2(Flexural Modulus,Mpa,IS 13360 (Part 5/ Sec 7),ASTM D790)	-	2000	The testing charge is in INR and for one sample. The testing charge may be revised as decided by the laboratory management.
Clause 3.5.3,Table-5 or Clause 6.2.1.3(Izod Impact Strength,J/m,IS 13360 (Part 5/Sec 4)/ASTM D256)	-	2000	The testing charge is in INR and for one sample. The testing charge may be revised as decided by the laboratory management.
Clause 6.3.2,Table-8, Sl no.1(Tensile yield strength, Mpa,IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 2))	-	2000	The testing charge is in INR and for one sample. The testing charge may be revised as decided by the laboratory management.
Clause 6.3.2,Table-8, Sl no.1(Elongation at yield, %, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 2))	-	2000	The testing charge is in INR and for one sample. The testing charge may be revised as decided by the laboratory management.
Clause 6.3.2,Table-8, Sl no.1(Tensile strength at break, Mpa, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 2))	-	2000	The testing charge is in INR and for one sample. The testing charge may be revised as decided by the laboratory management.
Clause 6.3.2,Table-8, Sl no.1(Elongation at break, percent, IS 13360 (Part 5/Sec 1) and IS 13360 (Part 5/Sec 2))	-	2000	The testing charge is in INR and for one sample. The testing charge may be revised as decided by the laboratory management.
Clause 6.3.2,Table-8, Sl no.2(Melting temperature,ᴼC,IS 13360 (Part 6/Sec 10))	-	5000	The testing charge is in INR and for one sample. The testing charge may be revised as decided by the laboratory management.
Clause 6.3.2,Table-8, Sl no.2(Temperature of deflection under load,°C,IS 13360 (Part 6/ Sec 3),IS 13360 (Part 6/ Sec 17))	-	2000	The testing charge is in INR and for one sample. The testing charge may be revised as decided by the laboratory management.
Clause 6.3.2,Table-8, Sl no.2(Temperature of deflection under load,°C,IS 13360 (Part 6/ Sec 3),IS 13360 (Part 6/ Sec 17))	-	2000	The testing charge is in INR and for one sample. The testing charge may be revised as decided by the laboratory management.
Clause 6.3.2,Table-8, Sl no.2(Vicat softening temperature, ᴼC,S 13360 (Part 6/Sec 1))	-	2000	The testing charge is in INR and for one sample. The testing charge may be revised as decided by the laboratory management.
Clause 6.3.2,Table-8, Sl no.4(Density,kg/m3,IS 13360 (Part 3/ Sec 10),IS 13360 (Part 3/ Sec 11))	-	1500	The testing charge is in INR and for one sample. The testing charge may be revised as decided by the laboratory management.
Clause 6.4.1()	-	200	The testing charge is in INR and for one sample. The testing charge may be revised as decided by the laboratory management.
Clause 6.4.2(Overall Migration, IS 9845, Annex D.2)	-	2500	The testing charge is in INR and for per simulant for one sample. The testing charge may be revised as decided by the laboratory management.

30 Nov, 2029

-
Included w.e.f 18.02.2025 Exclusion : Clause 6.3.2 Charpy Impact Strength, Clause 6.3.2 Hardness - Rockwell R, Clause 6.3.2 Flammability, Clause 6.3.2 Ignitability (Oxygen Index), Clause 6.3.2 Relative Permittivity, Clause 6.3.2 Dissipation Factor, Clause 6.3.2 Volume Resistivity, Clause 6.3.2 Surface Resistivity, Clause 6.3.2 Dielectric Strength, Clause 6.3.2Water absorption, Clause 6.4.2, Clause 6.4.2 Pigments and colourants

10344

ALAIPURIA TEST HOUSE PRIVATE LIMITED, GHAZIABAD

8180426

IS 7098 : Part 1 (1988)

Specification for crosslinked polyethylene insulated pvc sheathed cables: Part 1 for working voltages up to and including 1100 volts (First Revision)

65000 View breakup
Rs. 13500/- for Single Core Unarmoured Cable Category-01; Rs. 23500/- for Single Core Unarmoured Cable Category - C1 / C2; Rs. 16500/- for Single Core Armoured Cable; Rs. 27500/- for Single Core Armoured Cable Category - C1 / C2; Rs. 18000/- for up to 4 Cores Unarmoured Cable Category – 01; Rs. 28000/- for up to 4 Cores Unarmoured Cable Category – C1 / C2; Rs. 19000/- for up to 4 Cores Armoured Cable Category – 01; Rs. 25000/- for above 4 Cores and up to 12 Cores Armoured Cable Category – 01; Rs. 32000/- for above 12 Cores and up to 19 Cores Armoured Cable Category – 01; Rs. 40000/- for above 19 cores and up to 37 Cores armoured cable Category – 01; Rs. 55000/- for above 37 cores and up to 61 Cores armoured cable Category – 01; Rs. 29000/- for up to 4 cores armoured cable Category – C1 / C2; Rs. 35000/- for above 4 cores and up to 12 Cores armoured cable Category – C1 / C2; Rs. 42000/- for above 12 cores and up to 19 Cores armoured cable Category – C1 / C2; Rs. 50000/- for above 19 cores and up to 37 Cores armoured cable Category – C1 / C2; Rs. 65000/- for above 37 cores and up to 61 Cores armoured cable Category – C1 / C2; Rs. 2500/- for optional tests (cold bend / cold impact); Rs. 1500/- for Armour Resistance Test

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(CONDUCTOR: MATERIALS)	-	0	-
4(INSULATION : MATERIALS)	-	0	-
5.1(FILLER AND INNER SHEATH)	-	0	-
5.2(FILLER AND INNER SHEATH)	-	0	-
6(ARMOURING)	-	0	-
7(OUTER SHEATH)	-	0	-
8.1(CONDUCTOR: CONSTRUCTION)	-	0	-
8.2(PROTECTIVE BARRIER)	-	0	-
8.3(SIZE OF NEUTRAL CONDUCTOR)	-	0	-
9.1(Insulation Applied by extrusicn)	-	0	-
9.2(Thickness of Insulation - Average)	-	350	-
9.3(Thickness of Insulation - Minimum)	-	350	-
9.4(Application of Insulation)	-	0	-
10.1(Core Identification)	-	0	-
10.2(Core Identification- Neutral)	-	0	-
10.3(Core Identification by number )	-	0	-
10.4(Core Identification by number - Neutral )	-	0	-
11(LAVING UP OF CORES)	-	0	-
12.1 & 12.2(Inner sheath : Application)	-	0	-
12.3(Thickness of Inner Sheath)	-	250	-
13.1(Armouring: Application)	-	0	-
13.1.2(Armouring: Coverage )	-	250	-
13.1.3(Armouring: Direction of Lay )	-	0	-
13.2(Type of armour )	-	0	-
13.3(Armouring : Dimensions -Wire Diameter)	-	250	-
13.3(Armouring : Dimensions -Formed wire )	-	250	-
13.4(Armour: Joint)	-	0	-
13.5(Armouring : Resistance Test)	-	500	-
13.6 a)(ARMOURING: Tensile Strength)	-	350	-
13.6 b)(ARMOURING: Elongation )	-	350	-
13.6 c)(ARMOURING: Torsion Test (For round wire ) )	-	350	-
13.6 d)(ARMOURING: Winding Test(For formed wire))	-	350	-
13.6 e)(ARMOURING: Uniformity of zinc coating)	-	350	-
13.6 f)(ARMOURING: Mass of zinc coating )	-	350	-
13.6 g)(ARMOURING: Resistivity)	-	350	-
14.1(Outer Sheath : Application)	-	0	-
14.2(Colour of outer sheath)	-	0	-
14.3(Thickness of outer sheath - AVERAGE)	-	250	-
14.3(Thickness of outer sheath - minimum)	-	250	-
15.1 a) i)(Annealing Test ( For copper wire ) )	-	350	-
15.1 a) ii)(Tensile test (for aluminium) - Before stranding )	-	350	-
15.1 a) ii)(Tensile test (for aluminium) - After stranding )	-	350	-
15.1 a) iii)(Wrapping test (for aluminium))	-	350	-
15.1 a) iv)(Resistance test - Main conductor)	-	750	-
15.1 a) iv)(Resistance test - Neutral conductor)	-	500	-
15.1 d) i) (Phyaical tests for insulation : Tensile Test)	-	500	-
15.1 d) i) (Phyaical tests for insulation : Elongation)	-	500	-
15.1 d) ii) (Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-	1000	-
15.1 d) ii) (Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-	1000	-
15.1 d) iii) (Phyaical tests for insulation : Hot set )	-	500	-
15.1 d) iii) (Phyaical tests for insulation : Permanent set )	-	500	-
15.1 d) iv) (Phyaical tests for insulation : Shrinkage )	-	500	-
15.1 d) iv) (Phyaical tests for insulation : Shrinkage - Crack observed )	-	0	-
15.1 d) v) (Insulation: Waterabsorption(gravimetric))	-	3000	-
15.1 e) i) (Physical tests for outer sheath : Tensile stregth)	-	250	-
15.1 e) i) (Physical tests for outer sheath : Elongation)	-	250	-
15.1 e) ii) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-	1000	-
15.1 e) ii) (Physical tests for outer sheath -Ageing in air oven : Elongation )	-	1000	-
15.1 e) ii) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation )	-	0	-
15.1 e) ii) (Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-	0	-
15.1 e) iii) (Sheath: Loss of mass in air oven)	-	2000	-
15.1 e) iv) (Phyaical tests for Sheath : Shrinkage )	-	250	-
15.1 e) iv) (Phyaical tests for Sheath : Shrinkage - Crack observed )	-	0	-
15.1 e) v) (Sheath : Hot deformation)	-	750	-
15.1 e) vi) (Sheath : Heat shock test)	-	350	-
15.1 e) vii) (Sheath : Thermalstability)	-	500	-
15.1 f)(INSULATION RESISTANCE TEST : Volume resistivity )	-	500	-
16.2(HIGH VOLTAGE TEST )	-	1000	-
16.3(FLAMMABILITY TEST : Period of Burning )	-	750	-
16.3(FLAMMABILITY TEST : Unaffected length )	-	750	-
16.9(Oxygen Index Test)	-	1500	-
16.1(Flame Retardance Test on Single Cables)	-	1000	-
16.11(Flame Retardance Test on Bunched Cables)	-	7500	-
16.13(Test for Halogen Acid Gas Evolution)	-	2500	-
16.14(Temperature Index)	-	1500	-
17.1(Manufacturer'. identification)	-	0	-
17.2(cable Indentification )	-	0	-
17.3(cable Code )	-	0	-
15.4 (a)(Cold bend)	-	500	-
15.4 (b)(Cold impact)	-	500	-
Table 1(Ageing in air oven - Elongation on Insulation)	-	1000	-
Table 1(Ageing in air oven - Tensile strength on Insulation)	-	1000	-
Table 1(Ageing in air oven - Elongation on Insulation)	-	1000	-
Table 1(Ageing in air oven - Tensile strength on Insulation)	-	1000	-
Table 4(Copper purity test)	-	750	-
Cl No. 16.15(Smoke density test)	-	4000	-
Table 2(Cold Impact test for Outer sheath)	-	500	-
Table 2(Cold bend test for Outer sheath)	-	500	-
Cl 16(Halogen Acid Gas Test)	-	2500	-
Cl 16(Halogen Acid Gas Test)	-	2500	-
Cl 16(Halogen Acid Gas Test)	-	2500	-

03 Oct, 2027

-
-

10345

ALAIPURIA TEST HOUSE PRIVATE LIMITED, GHAZIABAD

8180426

IS 14255 (1995)

Aertal bunched cables - For working voltages up to and including 1100 Volts - Specification

25000 View breakup
a) For single phase with bare messenger - Rs.12,000/- b) For single Phase with bare messenger & street light conductor – Rs. 14500/- c) For single Phase with insulated messenger – Rs. 16500/- d) For single Phase with insulated messenger & street light conductor – Rs. 20000/- e) For Three phase with bare messenger - Rs. 18,000/- f) For Three Phase with bare messenger & street light conductor – Rs. 20,000/- g) For Three Phase with insulated messenger – Rs. 22,000/- h) For Three Phase with insulated messenger & street light conductor – Rs. 25,000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Phase/Street Lighting conductor)	-	0	-
4.2(Messenger (Neutral Conductor or Otherwise))	-	0	-
5.1(Insulation)	-	0	-
6.1(Flexibility class)	-	0	-
6.2(Compactness)	-	0	-
6.2(No of strands)	-	0	-
6.2(Surface)	-	0	-
6.3(Protective barrier)	-	0	-
6.4(size of street lighting conductor)	-	0	-
6.5(Size of messenger conductor )	-	0	-
6.6(Joints in messenger conductor )	-	0	-
6.6(Direction of outer layer)	-	0	-
7.1(Insulation)	-	0	-
7.2( Thickness of insulation)	-	500	-
7.3(Tolerance on thickness of insulation )	-	0	-
7.4(Aplication of the insulation )	-	0	-
7.5(Colour of the insulation )	-	0	-
8.1(Core identification)	-	0	-
8.2(Core identification)	-	0	-
8.3(Identification by other means)	-	0	-
9.1(Assembly (Laying up))	-	0	-
9.2(Assembly (Laying up))	-	0	-
9.3(Direction of lay)	-	0	-
10.1 a) i)(Tests on phase/street light conductor: tensile test - Test method IS10810:Part 2)	-	500	-
10.1 a) ii)(Wrapping test - 10810: Part 3)	-	250	-
10.1 a) iii)(Resistance test - IS10810: Part 5)	-	500	-
10.1 b) i)(Test on messenger conductor: Breaking load - IS 10810: Part 2)	-	750	-
10.1 b) ii)(Test on messenger conductor: Elongation test - Cl 11.3)	-	750	-
10.1 b) iii)(Test on messenger conductor: Resistance test - IS 10810: Part 5)	-	500	-
10.1 c) i)(Physical tests for XLPE Insulation: Tensile strength - IS 10810: Part 7)	-	500	-
10.1 c) i)(Physical tests for XLPE Insulation: elongation at break - IS 10810: part 7)	-	500	-
10.1 c) ii)(Ageing in air oven : Tensile strength variation - IS 10810:Part 11)	-	1500	-
10.1 c) ii)(Ageing in air oven : Elongation variation- IS 10810: Part 11)	-	1500	-
10.1 c) iii)(Hot set test: Elongation under load - IS 10810: Part 30)	-	500	-
10.1 c) iii)(Hot set test: Permanent elongation (set) after cooling - IS 10810: Part 30)	-	500	-
10.1 c) iv)(Shrinkage test : Shrinkage - 10810:Part 12)	-	400	-
10.1 c) iv)(Shrinkage test : Crack Observed - 10810:Part 12)	-	100	-
10.1 c) v)(Water ahsorption (Gravimetric) - IS 10810: Part 33 )	-	3000	-
10.1 d) i)(Physical test for PE insulation: Tensile strength - IS 10810: Part 7 )	-	1000	-
10.1 d) i)(Physical test for PE insulation: elongation at break - IS 10810: Part 7)	-	1000	-
10.1 d) ii)(Melt flow index- IS 10810: Part 23)	-	1500	-
10.1 d) iv)(Vicat softening point -IS 10810: Part 22)	-	1000	-
10.1 d) v)(Environmental stress cracking -IS 10810:Part29)	-	2500	-
10.1 f)(Insulation resistance (Volume resistivity) test a) volume resistivity at 27°C - IS 10810: Part 43)	-	750	-
10.1 f)(Insulation resistance (Volume resistivity) test b) volume resistivity at 70°C - IS 10810: Part 43)	-	750	-
10.1 g)(High voltage test - IS10810:Part 45)	-	750	-
11.4(Bending Test on the Completed Cable ( Optional) )	-	750	-
11.4(Bending Test on the Completed Cable ( Optional))	-	750	-
10.1 d) iii)(Carbon Black Content)	-	1000	-

03 Oct, 2027

-
-

10346

The Synthetic and Art Silk Mills' Research Association (SASMIRA), MUMBAI

7175004

IS 16703 (2017)

Textiles - High density polyethylene (HDPE) polypropylene (PP) woven sacks for packaging of 25 kg polymer materials - Specification

27600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Mass of Bale)	-	400	-
5.2 Table 1(Dimensions)	-	400	-
5.2 Table 1(Dimensions)	-	400	-
5.2 Table 1(Dimensions)	-	400	-
5.2 Table 1(Dimensions)	-	400	-
5.2 Table 1(Ends per dm)	-	200	-
5.2 Table 1(Picks per dm)	-	200	-
5.2 Table 1(Mass of sack, Gusseted type, g - IS 1964)	-	400	-
5.2 Table 1(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70mm1)] Min, N) (kgf): - IS 1969 (Part 1))	-	500	-
5.2 Table 1(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70mm1)] Min, N2) (kgf): - IS 1969 (Part 1))	-	500	-
5.2 Table 1(Breaking strength of bottom seam (Ravelled strip method), Min, N) (kgf) - IS 9030)	-	1000	-
5.2 Table 1(Elongation at break of fabric (Ravelled strip method), percent : IS 1969 (Part 1))	-	0	included with breaking strength
5.2 Table 1(Elongation at break of fabric (Ravelled strip method), percent : IS 1969 (Part 1))	-	0	included with breaking strength
5.2 Table 1(Drop impact strength)	-	1000	-
(Clauses 4.2, 5.1, 5.2, 5.3 and 5.4) Table 1 (Ash Content ,a) For UV stabilized sacks)	-	900	-
(Clauses 4.2, 5.1, 5.2, 5.3 and 5.4) Table 1 (Ash Content ,b) For non- UV stabilized sacks)	-	900	-
4.6(Capacity)	-	400	-
4.3.1(Bottom Seam)	-	4400	Inclusive of Identification, FTIR analysis, if required, breaking strength of stitching thread, dimension of bottom seam
4.3(Sacks)	-	1600	dimensions of half gusset, fold length, length, width
4.2,5.1,5.2,5.3,5.4(Breaking strenght after U.V. Exposure (Warp/Weft))	-	1000	-
4.2,5.1,5.2,5.3,5.4,(UV Resistance (192 hrs)(100 x 65+92x40))	-	12000	-
4.2(Linear Density)	-	200	-
4.2(Width of tape)	-	400	-
4.6(Capacity)	-	0	-
4.3.1(Bottom Seam)	-	0	-
4.3(Sacks)	-	0	-
4.2,5.1,5.2,5.3,5.4(Breaking strenght after U.V. Exposure (Warp/Weft))	-	0	-
4.2,5.1,5.2,5.3,5.4,(UV Resistance (192 hrs)(100 x 65+92x40))	-	0	-
4.2(Linear Density)	-	0	-
4.2(Width of tape)	-	0	-

14 Dec, 2026

-
-

10347

Spectro Analytical Labs Private Limited, Gautam Buddha Nagar

8130426

IS 2095 : Part 1 (2023)

Gypsum Plaster Boards Specification Part 1 Plain Gypsum Plaster Boards

A, H1, H2, D, F, FH, R1, R2, W

278000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause. 5.0(CaSO4.2H2O)	-	800	-
Clause. 5.0(Free water (Natural / By -product))	-	700	-
Clause. 5.0(pHvalue (Natural / By -product))	-	700	-
Clause. 5.0(SiO2)	-	1000	-
Clause. 5.0(Chloride content)	-	1000	-
Clause. 6.0(Manufacturing)	-	500	-
Clause. 7.0(Dimensions)	-	3000	-
Clause. 7.0(Tolerances)	-	4000	-
Clause. 7.0(Density)	-	2000	-
Clause. 7.0(Flexural Breaking Load)	-	5000	-
Clause. 7.0(Impact Resistance)	-	5000	-
Clause. 7.0(Surface Hardness)	-	1000	-
Clause. 7.0(Loading Capability)	-	2000	-
Clause. 7.0(Water Absorption)	-	1000	-
Clause. 7.0(Finish)	-	500	-
Clause. 7.0(Fire Resistance)	-	250000	-
Clause. 5.0(CaSO4.2H2O)	-	800	-
Clause. 5.0(Free water (Natural / By -product))	-	700	-
Clause. 5.0(pHvalue (Natural / By -product))	-	700	-
Clause. 5.0(SiO2)	-	1000	-
Clause. 5.0(Chloride content)	-	1000	-
Clause. 6.0(Manufacturing)	-	500	-
Clause. 7.0(Dimensions)	-	3000	-
Clause. 7.0(Tolerances)	-	4000	-
Clause. 7.0(Density)	-	2000	-
Clause. 7.0(Flexural Breaking Load)	-	5000	-
Clause. 7.0(Impact Resistance)	-	5000	-
Clause. 7.0(Surface Hardness)	-	1000	-
Clause. 7.0(Loading Capability)	-	2000	-
Clause. 7.0(Water Absorption)	-	1000	-
Clause. 7.0(Finish)	-	500	-
Clause. 7.0(Fire Resistance)	-	250000	-
Clause. 5.0(CaSO4.2H2O)	-	800	-
Clause. 5.0(Free water (Natural / By -product))	-	700	-
Clause. 5.0(pHvalue (Natural / By -product))	-	700	-
Clause. 5.0(SiO2)	-	1000	-
Clause. 5.0(Chloride content)	-	1000	-
Clause. 6.0(Manufacturing)	-	500	-
Clause. 7.0(Dimensions)	-	3000	-
Clause. 7.0(Tolerances)	-	4000	-
Clause. 7.0(Density)	-	2000	-
Clause. 7.0(Flexural Breaking Load)	-	5000	-
Clause. 7.0(Impact Resistance)	-	5000	-
Clause. 7.0(Surface Hardness)	-	1000	-
Clause. 7.0(Loading Capability)	-	2000	-
Clause. 7.0(Water Absorption)	-	1000	-
Clause. 7.0(Finish)	-	500	-
Clause. 7.0(Fire Resistance)	-	250000	-
Cl-5.3(Paper Liner)	-	1000	-

04 Jan, 2030

-
Included w.e.f 17.06.2025

10348

CIPET, Lucknow

9102534

IS 11197 (1985)

Specification for monoaxially oriented polypropylene tapes

15975 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Identification)	-	1050	-
3.1(Melt Flow Rate)	-	1100	-
4.1(Linear Density)	-	700	-
4.2(Tenacity)	-	1100	-
4.3(Elongation of the tape)	-	0	-
4.4(Thickness of the tape)	-	500	-
4.5(Finished Width of The Tape)	-	500	-
4.6(Colour Fastness in case of Pigmented Tapes)	-	10500	-
4.7.1(Dimensional Stability at 100 Deg C for 10 min)	-	700	-
4.7.2(Dimensional Stability at 125 Deg C for 10 min)	-	700	-

31 Dec, 2026

-
Included w.e.f. 20.08.2024

10349

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 410 (1977)

Specification for cold rolled brass sheet, strip and foil (Third Revision)

CuZn30,37,40

15800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.0(Freedom from defects)	-	100	-
6.1 Table-1(Cu)	-	1000	-
6.1 Table-1(Pb)	-	1000	-
6.1 Table-1(Fe)	-	1000	-
6.1 Table-1(Total impurities including iron)	-	2500	-
6.1 Table-1(Zn)	-	1000	-
7.1.1(Tensile Test)	-	2000	-
Table-2(Thickness)	-	100	-
Table-2(Tensile Strength)	-	2000	-
Table-2(Elongation)	-	1000	-
Table-2(Vickers Hardness)	-	700	-
Table-2(Transverse Bend)	-	1000	-
Table-2(Longitudinal Bend)	-	1000	-
7.1.1(Erichsen cupping values -IS 410)	-	800	-
7.1.5(Grain Size - IS 410)	-	1500	-
8(Dimensions -IS 410)	-	1000	-
11(Marking)	-	100	-

31 Dec, 2029

-
Included w.e.f. 02.07.2024

10350

TUV SUD SOUTH ASIA PRIVATE LIMITED, BENGALURU

6180126

IS 616 (2017)

Audio, video and similar electronic apparatus - Safety requirements (Fifth Revision)

Audio, video and similar electronic apparatus

121000 View breakup
Rs.1,21,000/- (10% Discount)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking and instructions)	-	3500	10% discount to BIS
7(Heating under normal operating conditions)	-	9500	10% discount to BIS
8(Constructional requirements with regard to the protection against electric shock)	-	6500	10% discount to BIS
9(Electric shock hazard under normal operating conditions)	-	7000	10% discount to BIS
10(Insulation requirements)	-	8000	10% discount to BIS
11(Fault conditions)	-	9000	10% discount to BIS
12(Mechanical strength)	-	9000	10% discount to BIS
13(CLEARANCES and CREEPAGE DISTANCES)	-	7000	10% discount to BIS
14(Components)	-	8000	10% discount to BIS
15(TERMINALS)	-	8000	10% discount to BIS
17(Electrical connections and mechanical fixings)	-	6500	10% discount to BIS
19(Stability and mechanical hazards)	-	6000	10% discount to BIS
20(Resistance to fire)	-	4000	10% discount to BIS
Annex-A(Additional requirements for apparatus with protection against splashing water)	-	5000	10% discount to BIS
16(External flexible cords)	-	6000	10% discount to BIS
20.2.4(Printed Boards)	-	0	-
3(General requirements)	-	4000	--
4(General test conditions)	-	4000	-
Annex-B(Apparatus to be connected to the TELECOMMUNICATION NETWORKS)	-	6000	-
Annex-L(Additional requirements for electronic flash apparatus for photographic purposes)	-	4000	-
Cl.5.1 of Cl.5(General requirements)	-	0	-
Cl.5.1-i) of Cl.5(Comprehensible and easily discernible)	-	0	-
Cl.5.1-ii) of Cl.5(Permanent durability against water and petroleum spirit)	-	0	-
Cl.5.2 of Cl.5(Identification and supply ratings)	-	0	-
Cl.5.2 a) of Cl.5(Identification, maker)	-	0	-
Cl.5.2 b) of Cl.5(Model number or type reference)	-	0	-
Cl.5.2 d) of Cl.5(Nature of supply)	-	0	-
Cl.5.2 e) of Cl.5(Rated supply voltage)	-	0	-
Cl.5.2 f) of Cl.5(Mains frequency if safety dependant)	-	0	-
Cl.5.2 g) of Cl.5(Rated current or power consumption for apparatus supplied by supply apparatus for general use, on apparatus or in instruction manual: Measured current or power consumption: Deviation % (max 10%):)	-	0	-
Cl.5.2 h) of Cl.5(Rated current or power consumption for apparatus intended for connection to an a.c. mains supply:Measured current or power consumption for Television set: Deviation % (max 10%):)	-	0	-
Cl.5.2 h)-ii) of Cl.5(Graphical symbols placed on the apparatus, whether required by this standard or not, shall be in accordance with IEC 60417 or ISO 3864-2 or ISO 7000, if available. In the absence of suitable symbols, the manufacturer may design specific graphical symbols.)	-	0	-
Cl.5.2 h)-iii) of Cl.5(Care shall be taken so that additional markings and instructions not required by this standard do not contradict the markings and instructions required by this standard . Symbols placed on the Equipment shall be explained in the user manual.)	-	0	-
Cl.5.3 of Cl.5(Terminals)	-	0	-
Cl.5.3a) of Cl.5(Earth terminal)	-	0	-
Cl.5.3b) of Cl.5(Hazardous live terminals)	-	0	-
Cl.5.3c) of Cl.5(Markings on supply output terminals)	-	0	-
Cl.5.4 of Cl.5(Caution marking)	-	0	-
Cl.5.4a) of Cl.5(Use of triangle with exclamation mark)	-	0	-
Cl.5.4b) of Cl.5(Marking on loudspeaker grille, IEC 60417-5036)	-	0	-
Cl.5.4c) of Cl.5(User-replaceable coin / button cell battery marking)	-	0	-
Cl.5.5 of Cl.5(Instructions)	-	0	-
Cl.5.5.1 of Cl.5.5(Safety relevant information)	-	0	-
Cl.5.5.2 a) of Cl.5.5(Mains powered equipment not exposed to dripping or splashing. Warning concerning objects filled with liquid, etc.)	-	0	-
Cl.5.5.2 b) of Cl.5.5(Hazardous live terminals, instructions for wiring)	-	0	-
Cl.5.5.2 c) of Cl.5.5(Instructions for replacing lithium battery)	-	0	-
Cl.5.5.2 d) of Cl.5.5(Class I earth connection warning)	-	0	-
Cl.5.5.2 e) of Cl.5.5(Instructions for multimedia system connection)	-	0	-
Cl.5.5.2 f) of Cl.5.5(Special stability warning for attachment of the apparatus to the floor/wall)	-	0	-
Cl.5.5.2 g) of Cl.5.5(Warning: battery exposure to heat)	-	0	-
Cl.5.5.2 h) of Cl.5.5(Warning: protective film on CRT face)	-	0	-
Cl.5.5.2 i) of Cl.5.5("Warning: Non-floor standing TV >7kg")	-	0	-
Cl.5.5.2 j) of Cl.5.5("Warning: User replaceable coin / button cell battery")	-	0	-
Cl.5.5.3 (a-b) of Cl.5.5(Disconnect device: plug/coupler or all-pole mains switch location, accessibility and markings)	-	0	-
Cl.5.5.3 c) of Cl.5.5(Instructions for permanently connected equipment)	-	0	-
Cl.5.5.3 c) i) of Cl.5.5(Marking, signal lamps or similar for completely disconnection from the mains)	-	0	-
Cl.7.1 of Cl.7(General)	-	0	-
"Cl.7.1.1 of Cl.7.1 Table-3"(Requirements)	-	0	-
"Cl.7.1.2 of Cl.7.1 Table-3"(Accessible parts)	-	0	-
"Cl.7.1.3 of Cl.7.1 Table-3"(Parts, other than windings and printed boards, providing electrical insulation)	-	0	-
"Cl.7.1.4 of Cl.7.1 Table-3"(Parts acting as a support or a mechanical barrier)	-	0	-
"Cl.7.1.5 of Cl.7.1 Table-3"(Windings)	-	0	-
"Cl.7.1.6 of Cl.7.1 Table-3"(Parts not subject to a limit under7.1.1 to 7.1.4)	-	0	-
Cl.7.2 of Cl.7(Softening temperature of insulating material supporting parts conductively connected to the mains carrying a current> 0.2 A, shall be at least 150ºC)	-	0	-
Cl.8.1 of Cl.8(Conductive parts covered by lacquer, paper, untreated textile oxide films and beads etc. considered to be bare*)	-	0	-
Cl.8.2 of Cl.8(No shock hazard when changing voltage setting device, fuse-links or handling drawers etc.)	-	0	-
Cl.8.3 of Cl.8(Insulation of hazardous live parts not provided by hygroscopic material)	-	0	-
Cl.8.4 of Cl.8(No risk of electric shock from accessible parts or from parts rendered accessible following the removal of a cover which can be removed by hand)	-	0	-
Cl.8.5 of Cl.8(Class I apparatus*)	-	0	-
Cl.8.5 ii) of Cl.8(Resistors bridging basic insulation shall complying with 14.1 a) *)	-	0	-
Cl.8.5 iii) of Cl.8(Capacitors bridging basic insulation shall complying with 14.2.1 a) *)	-	0	-
Cl.8.5 iv) of Cl.8(Protective earthing terminal *)	-	0	-
Cl.8.6 of Cl.8(Class II apparatus)	-	0	-
Cl.8.6 a) of Cl.8(Basic and supplementary insulation between hazardous live parts and accessible parts *)	-	0	-
Cl.8.6 b) of Cl.8(Reinforced insulation between hazardous live parts and accessible parts *)	-	0	-
Cl.8.7 of Cl.8(Components bridging insulation)	-	0	-
Cl.8.7 i) of Cl.8(Basic insulation bridged by components complying with 14.4.5.3)	-	0	-
Cl.8.7 ii) of Cl.8(Components bridging basic, supplementary, double or reinforced insulation complying with 14.2 a) or 14.4)	-	0	-
Cl.8.7 iii) of Cl.8(Basic and supplementary insulation each being bridged by a capacitor or RC-unit complying with 14.3.2 a))	-	0	-
Cl.8.7 iv) of Cl.8(Double or reinforced insulation being bridged with 2 capacitors or RC-units in series complying with 14.3.2 a))	-	0	-
Cl.8.7 v) of Cl.8(Double or reinforced insulation being bridged with a single capacitor or RC-unit complying with 14.3.2 b))	-	0	-
Cl.8.8 of Cl.8(Insulation thickness and thin sheet materials)	-	0	-
Cl.8.8 i) of Cl.8(Basic or supplementary insulation > 0,4 mm (mm)*)	-	0	-
Cl.8.8 ii) of Cl.8(Reinforced insulation > 0,4 mm (mm) *)	-	0	-
Cl.8.8 iii) of Cl.8(Thin sheet material used inside the equipment)	-	0	-
Cl.8.8 iv) of Cl.8(Basic or supplementary insulation, atleast two layers, each meeting10.4)	-	0	-
Cl.8.8 v) of Cl.8(Basic or supplementary insulation, three layers any two of which meet10.4)	-	0	-
Cl.8.8 vi) of Cl.8(Reinforced insulation, two layers each of which meet 10.4)	-	0	-
Cl.8.9 of Cl.8(Adequate insulation between internal hazardous live conductors and accessible parts, or between internal hazardous live parts and conductors connected to accessible parts)	-	0	-
Cl.8.10 of Cl.8(Double insulation between accessible parts and conductors connected to the mains)	-	0	-
Cl.8.10 of Cl.8(Double insulation between conductors connected to accessible parts and parts connected to the mains)	-	0	-
Cl.8.11 of Cl.8(Detaching of wires)	-	0	-
Cl.8.11 i) of Cl.8(Noun due reduction of creepage or clearance distances if wires become detached)	-	0	-
Cl.8.11 ii) of Cl.8(Vibration test carried out)	-	0	-
Cl.8.12 of Cl.8(Adequate fastening of windows, lenses, lamp covers etc. (pull test 20 N for 10 s))	-	0	-
Cl.8.13 of Cl.8(Adequate fastening of windows, lenses, lamp covers etc. (pull test 20 N for 10 s))	-	0	-
Cl.8.14 of Cl.8(No risk of damage to the insulation of internal wiring due to hot parts or sharp edges)	-	0	-
Cl.8.15 of Cl.8(Only special supply equipment can be used*)	-	0	-
Cl.8.18 of Cl.8(Disconnection from the mains)	-	0	-
Cl.8.18 i) of Cl.8(Disconnect device used in apparatus)	-	0	-
Cl.8.18 ii) of Cl.8(All-pole switch or circuit breaker with >3mm contact separation.)	-	0	-
Cl.8.18 iii) of Cl.8(Mains switch ON indication *)	-	0	-
Cl.8.19 of Cl.8(Switch not fitted in the mains cord *)	-	0	-
Cl.8.20 of Cl.8(Bridging components comply with clause 14)	-	0	-
Cl.8.21 of Cl.8(Non-separable thin sheet material)	-	0	-
Cl.9.1 of Cl.9(Testing on the outside)	-	0	-
Cl.9.1.1 of Cl.9.1(Requirements)	-	0	-
Cl.9.1.1 i) of Cl.9.1(Accessible parts shall not be hazardous live)	-	0	-
Cl.9.1.1 ii) of Cl.9.1(Inaccessible terminals are not accessible or comply with relevant requirements)	-	0	-
Cl.9.1.1 iii) of Cl.9.1(For voltages >1000 V ac or >1500 V dc complies with clause 13.3.1 for basic insulation)	-	0	-
Cl.9.1.1.2 of Cl.9.1.1(Determination of hazardous live parts)	-	0	-
Cl.9.1.1.2 a) of Cl.9.1.1(Open circuit voltages)	-	0	-
Touch current measured from terminal devices using the network in annex D(Touch current measured from terminal devices using the network in annex D)	-	0	-
Cl.9.1.1.2 c) of Cl.9.1.1(The charge exceeds 45 μC)	-	0	-
Cl.9.1.1.2 d) of Cl.9.1.1(Energy of discharge not exceeding 350 mJ)	-	0	-
Cl.9.1.1.3 of Cl.9.1.1(Test with test finger and test probe)	-	0	-
Cl.9.1.2 of Cl.9.1(Shafts of operating knobs, handles, levers and the like)	-	0	-
Cl.9.1.3 of Cl.9.1(Openings ofthe enclosure)	-	0	-
Cl.9.1.4 of Cl.9.1(Terminals)	-	0	-
Cl.9.1.4 i) of Cl.9.1(Terminals)	-	0	-
Cl.9.1.4 ii) of Cl.9.1(Terminals)	-	0	-
Cl.9.1.5 of Cl.9.1(Pre-set controls)	-	0	-
Cl.9.1.6 of Cl.9.1(Withdrawal of the mains plug:)	-	0	-
Cl.9.1.6 i) of Cl.9.1(Withdrawal of the mains plug:)	-	0	-
Cl.9.1.6 ii) of Cl.9.1(Withdrawal of the mains plug:)	-	0	-
Cl.9.1.6 iii) of Cl.9.1(Withdrawal of the mains plug:)	-	0	-
Cl.9.1.7 of Cl.9.1(Resistance to external forces)	-	0	-
Cl.9.1.7 a) of Cl.9.1(Resistance to external forces)	-	0	-
Cl.9.1.7 b) of Cl.9.1(Resistance to external forces)	-	0	-
Cl.9.1.7 c) of Cl.9.1(Resistance to external forces)	-	0	-
Cl.9.2 of Cl.9(Removal of protective covers)	-	0	-
Cl.10.2 of Cl.10(Surge Test)	-	0	-
Cl.10.2 a) of Cl.10(Surge Test)	-	0	-
Cl.10.2 b) of Cl.10(Surge Test)	-	0	-
Cl.10.2 b) (i) of Cl.10(Surge Test)	-	0	-
Cl.10.2 b) (ii) of Cl.10(Surge Test)	-	0	-
Cl.10.2 b) (iii) of Cl.10(Surge Test)	-	0	-
Cl.10.3 of Cl.10(Humidity treatment)	-	0	-
Cl.10.4 of Cl.10(Insulation resistance and dielectric strength)	-	0	-
Cl.10.4.1 of Cl.10.4(Insulation of the insulating materials)	-	0	-
Cl.10.4.2 of Cl.10.4(Between parts of different polarity directly connected to the mains Between parts of different polarity directly connected to the mains)	-	0	-
Cl.10.4.2 i) of Cl.10.4(Between parts separated by BASIC or SUPPLEMENTARY insulation)	-	0	-
Cl.10.4.2 ii) of Cl.10.4(Between parts separated by REINFORCED insulation)	-	0	-
Cl.11.1 of Cl.11(Electric Shock Hazard)	-	0	-
Cl.11.1 a) of Cl.11(Electric Shock Hazard)	-	0	-
Cl.11.1 b) of Cl.11(Electric Shock Hazard)	-	0	-
Cl.11.2 of Cl.11(Heating)	-	0	-
Cl.11.2.1 of Cl.11.2(Requirements)	-	0	-
Cl.11.2.1 i) of Cl.11.2(No danger of fire to the surroundings)	-	0	-
Cl.11.2.1 ii) of Cl.11.2(Safety not impaired by abnormal heat)	-	0	-
Cl.11.2.1 of Cl.11.2(Flames extinguish within 10 seconds)	-	0	-
Cl.11.2.1 of Cl.11.2(No hazard from softening solder)	-	0	-
Cl.11.2.1 of Cl.11.2(Soldered terminations not used as protective mechanism)	-	0	-
Cl.11.2.2 of Cl.11.2(Measurement of temperature rises)	-	0	-
Cl.11.2.3 of Cl.11.2(Accessible parts)	-	0	-
Cl.11.2.4 of Cl.11.2(Parts, other than windings and printed boards, providing electrical insulation)	-	0	-
Cl.11.2.5 of Cl.11.2(Parts acting as a support or a mechanical barrier)	-	0	-
Cl.11.2.6 of Cl.11.2(Windings )	-	0	-
Cl.11.2.7 of Cl.11.2(Printed boards)	-	0	-
Cl.11.2.7 i) of Cl.11.2(Printed boards)	-	0	-
Cl.11.2.7 i) a) of Cl.11.2(Printed boards)	-	0	-
Cl.11.2.7 i) b) of Cl.11.2(Printed boards)	-	0	-
Cl.11.2.7 ii) of Cl.11.2(Printed boards)	-	0	-
Cl.11.2.7 iii) of Cl.11.2(Printed boards)	-	0	-
Cl.11.2.8 of Cl.11.2(Parts not subject to a limit under7.1.1 to 7.1.4)	-	0	-
Cl.12.1.1 of Cl.12.1(Requirements)	-	0	-
Cl.12.1.2 of Cl.12.1(Bump test )	-	0	-
Cl.12.1.3 of Cl.12.1(Vibration test)	-	0	-
Cl.12.1.4 of Cl.12.1(Impact test)	-	0	-
Cl.12.1.4 i) of Cl.12.1(Impact test)	-	0	-
Cl.12.1.4 ii) of Cl.12.1(Impact test)	-	0	-
Cl.12.1.5 of Cl.12.1(Drop test)	-	0	-
Cl.12.1.6 of Cl.12.1(Stress relief test)	-	0	-
Cl.12.2 of Cl.12(Fixing of actuating elements)	-	0	-
Cl.12.3 of Cl.12(Remote control devices held in hand)	-	0	-
Cl.12.4 of Cl.12(Drawers )	-	0	-
Cl.12.5 of Cl.12(Antenna coaxial sockets mounted on the apparatus)	-	0	-
Cl.12.5 a) of Cl.12(Endurance test,)	-	0	-
Cl.12.5 b) of Cl.12(Impact test,)	-	0	-
Cl.12.5 c) of Cl.12(Torque test)	-	0	-
Cl.12.6 of Cl.12(Telescoping or rod antennas)	-	0	-
Cl.12.6.1 of Cl.12.6(General requirements)	-	0	-
Cl.12.6.1 i) of Cl.12.6(General requirements)	-	0	-
Cl.12.6.2 of Cl.12.6(Physical securement)	-	0	-
Cl.12.7 of Cl.12(Apparatus containing coin / button cell batteries)	-	0	-
Cl.12.7.1 of Cl.12.7(Coin/button cell batteries with a diameter of 32 mm or less.)	-	0	-
Cl.12.7.2 of Cl.12.7(Construction requirementss)	-	0	-
Cl.12.7.3 of Cl.12.7(Tests)	-	0	-
Cl.12.7.3.2 of Cl.12.7.3(Stress relief test)	-	0	-
Cl.12.7.3.3 of Cl.12.7.3(Battery replacement test)	-	0	-
Cl.12.7.3.4 of Cl.12.7.3(Drop test)	-	0	-
Cl.12.7.3.5 of Cl.12.7.3(Impact test)	-	0	-
Cl.12.7.3.6 of Cl.12.7.3(Crush test)	-	0	-
Cl.12.7.4 of Cl.12.7(Compliance)	-	0	-
Cl.13.1 of Cl.13(General)	-	0	-
Cl.13.2 of Cl.13(Determination of Working voltage)	-	0	-
Cl.13.3 of Cl.13(Clearances)	-	0	-
Cl.13.3.1 of Cl.13.3(General)	-	0	-
Cl.13.3.2 of Cl.13.3(Clearances in circuits conductively connected to the mains)	-	0	-
Cl.13.3.3 of Cl.13.3(Clearances in circuits not conductively connected to the mains)	-	0	-
Cl.13.3.4 of Cl.13(Measurement of transient voltages)	-	0	-
Cl.13.4 a) of Cl.13(Creepage distances )	-	0	-
Cl.13.4 b) of Cl.13(Creepage distances )	-	0	-
Cl.13.4 c) of Cl.13(Creepage distances )	-	0	-
Cl.13.6 a) of Cl.13(Jointed insulation )	-	0	-
Cl.13.6 b) of Cl.13(Jointed insulation )	-	0	-
Cl.13.6 c) of Cl.13(Jointed insulation )	-	0	-
Cl.13.6 d) of Cl.13(Jointed insulation )	-	0	-
Cl.13.7 of Cl.13(Enclosed and sealed parts)	-	0	-
Cl.13.8 of Cl.13(Parts filled with insulating compound, meeting the requirements of 8.8)	-	0	-
Cl.15.1 of Cl.15(Plugs and Sockets*)	-	0	-
Cl.15.1.1 of Cl.15.1(Plugs and Sockets*)	-	0	-
Cl.15.1.1 i) of Cl.15.1(Plugs and Sockets*)	-	0	-
Cl.15.1.1 ii) of Cl.15.1(Plugs and Sockets*)	-	0	-
Cl.15.1.2 of Cl.15.1(Design of connectors other than for mains power *)	-	0	-
Cl.15.1.2 i) of Cl.15.1(Design of sockets with symbol of 5.3 b) design *)	-	0	-
Cl.15.1.3 of Cl.15.1(Design of terminals and connectors used in output circuits of supply apparatus*)	-	0	-
Cl.15.2 of Cl.15(Provisions for protective earthing)	-	0	-
Cl.15.2 i) of Cl.15(Provisions for protective earthing)	-	0	-
Cl.15.2 ii) of Cl.15(Provisions for protective earthing)	-	0	-
Cl.15.2 iii) of Cl.15(Provisions for protective earthing)	-	0	-
Cl.15.2 iv) of Cl.15(Provisions for protective earthing)	-	0	-
Cl.15.2 v) of Cl.15(Provisions for protective earthing)	-	0	-
Cl.15.3 of Cl.15(Terminals for external flexible cords and for permanent connection to the mains supply*)	-	0	-
Cl.15.3.1 of Cl.15.3(Adequate terminals for connection of permanent wiring*)	-	0	-
Cl.15.3.2 of Cl.15.3(Reliable connection of non-detachable cords)	-	0	-
Cl.15.3.2 i) of Cl.15.3(Not soldered to conductors of a printed circuit board)	-	0	-
Cl.15.3.2 ii) of Cl.15.3(Adequate clearances and creepage distances between connections should a wire break away)	-	0	-
Cl.15.3.2 iii) of Cl.15.3(Wire secured by additional means to the conductor)	-	0	-
Cl.15.3.3 of Cl.15.3(Screws and nuts clamping conductors have adequate threads: ISO 261, ISO 262 or similar*)	-	0	-
Cl.15.3.4 of Cl.15.3(Conductors adequately fixed (two independent fixings) *)	-	0	-
Cl.15.3.5 of Cl.15.3(Terminals allow connection of conductors having appropriate cross-sectional area)	-	0	-
Cl.15.3.6 of Cl.15.3(Terminals to 15.3.3 have sizes required by table 16)	-	0	-
Cl.15.3.7 of Cl.15.3(Terminals clamp conductors between metal and have adequate pressure)	-	0	-
Cl.15.3.7 i) of Cl.15.3(Terminals designed to avoid conductor slipping out when tightened)	-	0	-
Cl.15.3.7 ii) of Cl.15.3(Terminals adequately fixed when tightened or loosened (no loosening, wiring not stressed, distances not reduced))	-	0	-
Cl.15.3.8 of Cl.15.3(Terminals carrying a current more than)	-	0	-
Cl.15.3.8 i) of Cl.15.3(0.2 A, contact pressure not transmitted by insulating material except ceramic*)	-	0	-
Cl.15.3.9 of Cl.15.3(Termination of non-detachable cords: wires terminated near to each other)	-	0	-
Cl.15.3.9 i) of Cl.15.3(Terminals located and shielded: test with 8 mm strand)	-	0	-
Cl.15.4 of Cl.15(Devices forming a part of the mains plug*)	-	0	-
Cl.15.4.1 of Cl.15.4(No undue strain on mains socket-outlets.)	-	0	-
Cl.15.4.1 i) of Cl.15.4(Device shall be tested on the equipment as per Fig.11: Torque to be applied : 0.25 Nm (Max))	-	0	-
Cl.15.4.2 of Cl.15.4(Device complies with standard for dimensions of mains plugs)	-	0	-
Cl.15.4.3 of Cl.15.4(Device has adequate mechanical strength (tests a,b,c))	-	0	-
Cl.16.1 a) of Cl.16(Mains supply flexible cords shall be sheathed type, complying with IEC 60227 for PVC cords or as per IEC 60245 for synthetic rubber cords)	-	0	-
Cl.16.1 b) of Cl.16(Non-detachable cords for Class I have green/yellow core for protective earth)	-	0	-
Cl.16.2 of Cl.16(Mains cords conductors shall have a nominal cross-sectional area not less than the values given in Table 18, for rated current consumption of the apparatus)	-	0	-
Cl.16.3 a) of Cl.16(Flexiblecordsnotcomplyingwith16.1, used for interconnections between separate units of equipment used in combination and carrying hazardous live voltages, have adequate dielectric strength as perCl.10.3)	-	0	-
Cl.16.4 of Cl.16(Flexible cords used for connection between equipment have adequate cross-sectional areas to avoid temperature rise under normal and fault conditions)	-	0	-
Cl.16.5 a) of Cl.16(Adequate strain relief on external flexible cords)	-	0	-
Cl.16.5 b) of Cl.16(Not possible to push cord back into equipment)	-	0	-
Cl.16.5 c) of Cl.16(Strain relief device unlikely to damage flexible cord)	-	0	-
Cl.16.5 d) of Cl.16(For mains cords of Class I equipment, hazardous live conductors become taut before earth conductor)	-	0	-
Cl.16.6 of Cl.16(Apertures for external flexible cord: no risk of damage to the cord during assembly or movement in use)	-	0	-
Cl.16.7 a) of Cl.16(Transportable apparatus fitted with detachable cord sets with appliance inlet as perIEC60320-1 or)	-	0	-
Cl.16.7 b) of Cl.16(Transportable apparatus shall have a means of stowage to protect the cord)	-	0	-
17.1 a) of Cl.17(Screws are loosened and then tightened with a torque according to table20)	-	0	-
Cl.17.1 b) of Cl.17(5 times in the case of screws operating in a thread of metal)	-	0	-
Cl.17.1 c) of Cl.17(10 times in the case of screws operating in wood or in a thread in insulating material:)	-	0	-
Cl.17.2 of Cl.17(Correct introduction of screws into female threads in non-metallic material)	-	0	-
Cl.17.3 a) of Cl.17(Screws or other fixing devices intended to fix Covers, legs, stands or the like, shall be captive in order to prevent replacement during servicing by screws or other fixing devices……)	-	0	-
Cl.17.3 b) of Cl.17(Non-captive fixing screws: no hazard when replaced by a screw whose length is 10 times its diameter)	-	0	-
Cl.17.4 of Cl.17(No loosening of conductive parts carrying a current > 0.2 A)	-	0	-
Cl.17.5 of Cl.17(Contact pressure not transmitted through plastic other than ceramic for connections carrying a current > 0.2 A*)	-	0	-
Cl.17.6 of Cl.17(Stranded conductors of flexible supply cords carrying a current > 0.2 A with screw terminals not consolidated by solder *)	-	0	-
Cl.17.7 of Cl.17(Cover fixing devices other than screws have adequate strength and their positioning is unambiguous)	-	0	-
Cl.17.8 of Cl.17(Detachable legs or stands supplied by the manufacturer of the apparatus shall be delivered with the relevant fixing means *)	-	0	-
Cl.17.9 a) of Cl.17(Internal pluggable connections, affecting safety, unlikely to become disconnected)	-	0	-
Cl.17.9 b) of Cl.17(By applying a 2N pull force in any direction to the connection, in case of doubt)	-	0	-
Cl.19.1 of Cl.19(Stability and mechanical hazards)	-	0	-
Cl.19.1 of Cl.19(Stability requirements)	-	0	-
Cl.19.1 i) of Cl.19(Stability requirements)	-	0	-
Cl.19.2 of Cl.19(Test at 10° to the horizontal)	-	0	-
Cl.19.3 of Cl.19(Vertical force test )	-	0	-
Cl.19.4 of Cl.19(Horizontal force test)	-	0	-
Cl.19.5 of Cl.19(Test of edges and corners)	-	0	-
Cl.19.6 of Cl.19(Mechanical strength of glass)	-	0	-
Cl.19.6.1 of Cl.19.6(Requirements)	-	0	-
Cl.19.6.2 of Cl.19.6(Fragmentation test)	-	0	-
Cl.19.7 of Cl.19(Wall or ceiling mounting means)	-	0	-
Cl.19.7.1 of Cl.19..7(Requirements)	-	0	-
Cl.19.7.3 of Cl.19.7(Compliance)	-	0	-
Cl.20.1 of Cl.20(Requirements)	-	0	-
Cl.20.2 of Cl.20(Electrical components and mechanical parts)	-	0	-
Cl.20.2.1 a) of Cl.20.2(Exemption for components contained in an enclosure of material V-0 to IEC60695- 11-10 with openings not exceeding 1 mm in width)	-	0	-
Cl.20.2.1 b) of Cl.20.2(Exemption for small components)	-	0	-
Cl.20.2.2 of Cl.20.2(Electrical components )	-	0	-
Cl.20.2.3 of Cl.20.2(Internal wiring)	-	0	-
Cl.20.2.5 of Cl.20.2(Components and parts not covered by 20.2.2, 20.2.3 and 20.2.4)	-	0	-
Cl.20.2.5 i) of Cl.20.2(Components and parts not covered by 20.2.2, 20.2.3 and 20.2.4)	-	0	-
Cl.20.2.5 ii) of Cl.20.2(Components and parts not covered by 20.2.2, 20.2.3 and 20.2.4)	-	0	-
Cl.20.3 of Cl.20(Fire enclosure*)	-	0	-
Cl.20.3.1 of Cl.20.3(Fire enclosure*)	-	0	-
Cl.20.3.2 of Cl.20.3(Fire enclosure*)	-	0	-
Cl.20.3.3 of Cl.20.3(Fire enclosure*)	-	0	-
8.16/ H 2.2/ H 2.3(Requirements for insulated winding wires for use without additional interleaved insulation)	-	0	-
8.16(Wound Component)	-	0	-
Cl.5.2 h)-i) of Cl.5(appliance coupler for Class I is used for Class II equipment with functional earth connection, the requirements of Clause 15 and Clause 16 related to Class I construction shall be applied up to the connecting point of the protective(earthing) conductor to the functional earth.)	-	0	-
Cl.5.5 of Cl.5(Instructions)	-	0	-
Cl.5.5 of Cl.5(Instructions)	-	0	-
Cl.8.5 i) of Cl.8(Basic insulation between hazardous live parts and earthed accessible parts *)	-	0	-
Cl.8.16 of Cl.8(Insulated winding wire without additional interleaved insulation)	-	0	-
Cl.20.2.4 of Cl.20.2(Printed boards)	-	0	-
Cl.20.2.4 i) of Cl.20.2(Printed boards)	-	0	-
14(Components)	-	0	-
15(Internal wires and power cords)	-	0	-
18(Mechanical strength of Picture tubes and protection against the effect of implosion)	-	0	-

11 Sep, 2027

-
Exclusion: Cl.6.1 (Inonization radiation), Cl.6.2 (Laser radiations), Cl.6.3 (Light emitting diodes), Cl.18 (Mechanical strength of picture tubes and protection against the effect of implosion), 16.3b (Cord Bending Test)

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number