BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15612 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

10381

ALAIPURIA TEST HOUSE PRIVATE LIMITED, GHAZIABAD

8180426

IS 7098 : Part 1 (1988)

Specification for crosslinked polyethylene insulated pvc sheathed cables: Part 1 for working voltages up to and including 1100 volts (First Revision)

65000 View breakup
Rs. 13500/- for Single Core Unarmoured Cable Category-01; Rs. 23500/- for Single Core Unarmoured Cable Category - C1 / C2; Rs. 16500/- for Single Core Armoured Cable; Rs. 27500/- for Single Core Armoured Cable Category - C1 / C2; Rs. 18000/- for up to 4 Cores Unarmoured Cable Category – 01; Rs. 28000/- for up to 4 Cores Unarmoured Cable Category – C1 / C2; Rs. 19000/- for up to 4 Cores Armoured Cable Category – 01; Rs. 25000/- for above 4 Cores and up to 12 Cores Armoured Cable Category – 01; Rs. 32000/- for above 12 Cores and up to 19 Cores Armoured Cable Category – 01; Rs. 40000/- for above 19 cores and up to 37 Cores armoured cable Category – 01; Rs. 55000/- for above 37 cores and up to 61 Cores armoured cable Category – 01; Rs. 29000/- for up to 4 cores armoured cable Category – C1 / C2; Rs. 35000/- for above 4 cores and up to 12 Cores armoured cable Category – C1 / C2; Rs. 42000/- for above 12 cores and up to 19 Cores armoured cable Category – C1 / C2; Rs. 50000/- for above 19 cores and up to 37 Cores armoured cable Category – C1 / C2; Rs. 65000/- for above 37 cores and up to 61 Cores armoured cable Category – C1 / C2; Rs. 2500/- for optional tests (cold bend / cold impact); Rs. 1500/- for Armour Resistance Test

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(CONDUCTOR: MATERIALS)	-	0	-
4(INSULATION : MATERIALS)	-	0	-
5.1(FILLER AND INNER SHEATH)	-	0	-
5.2(FILLER AND INNER SHEATH)	-	0	-
6(ARMOURING)	-	0	-
7(OUTER SHEATH)	-	0	-
8.1(CONDUCTOR: CONSTRUCTION)	-	0	-
8.2(PROTECTIVE BARRIER)	-	0	-
8.3(SIZE OF NEUTRAL CONDUCTOR)	-	0	-
9.1(Insulation Applied by extrusicn)	-	0	-
9.2(Thickness of Insulation - Average)	-	350	-
9.3(Thickness of Insulation - Minimum)	-	350	-
9.4(Application of Insulation)	-	0	-
10.1(Core Identification)	-	0	-
10.2(Core Identification- Neutral)	-	0	-
10.3(Core Identification by number )	-	0	-
10.4(Core Identification by number - Neutral )	-	0	-
11(LAVING UP OF CORES)	-	0	-
12.1 & 12.2(Inner sheath : Application)	-	0	-
12.3(Thickness of Inner Sheath)	-	250	-
13.1(Armouring: Application)	-	0	-
13.1.2(Armouring: Coverage )	-	250	-
13.1.3(Armouring: Direction of Lay )	-	0	-
13.2(Type of armour )	-	0	-
13.3(Armouring : Dimensions -Wire Diameter)	-	250	-
13.3(Armouring : Dimensions -Formed wire )	-	250	-
13.4(Armour: Joint)	-	0	-
13.5(Armouring : Resistance Test)	-	500	-
13.6 a)(ARMOURING: Tensile Strength)	-	350	-
13.6 b)(ARMOURING: Elongation )	-	350	-
13.6 c)(ARMOURING: Torsion Test (For round wire ) )	-	350	-
13.6 d)(ARMOURING: Winding Test(For formed wire))	-	350	-
13.6 e)(ARMOURING: Uniformity of zinc coating)	-	350	-
13.6 f)(ARMOURING: Mass of zinc coating )	-	350	-
13.6 g)(ARMOURING: Resistivity)	-	350	-
14.1(Outer Sheath : Application)	-	0	-
14.2(Colour of outer sheath)	-	0	-
14.3(Thickness of outer sheath - AVERAGE)	-	250	-
14.3(Thickness of outer sheath - minimum)	-	250	-
15.1 a) i)(Annealing Test ( For copper wire ) )	-	350	-
15.1 a) ii)(Tensile test (for aluminium) - Before stranding )	-	350	-
15.1 a) ii)(Tensile test (for aluminium) - After stranding )	-	350	-
15.1 a) iii)(Wrapping test (for aluminium))	-	350	-
15.1 a) iv)(Resistance test - Main conductor)	-	750	-
15.1 a) iv)(Resistance test - Neutral conductor)	-	500	-
15.1 d) i) (Phyaical tests for insulation : Tensile Test)	-	500	-
15.1 d) i) (Phyaical tests for insulation : Elongation)	-	500	-
15.1 d) ii) (Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-	1000	-
15.1 d) ii) (Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-	1000	-
15.1 d) iii) (Phyaical tests for insulation : Hot set )	-	500	-
15.1 d) iii) (Phyaical tests for insulation : Permanent set )	-	500	-
15.1 d) iv) (Phyaical tests for insulation : Shrinkage )	-	500	-
15.1 d) iv) (Phyaical tests for insulation : Shrinkage - Crack observed )	-	0	-
15.1 d) v) (Insulation: Waterabsorption(gravimetric))	-	3000	-
15.1 e) i) (Physical tests for outer sheath : Tensile stregth)	-	250	-
15.1 e) i) (Physical tests for outer sheath : Elongation)	-	250	-
15.1 e) ii) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-	1000	-
15.1 e) ii) (Physical tests for outer sheath -Ageing in air oven : Elongation )	-	1000	-
15.1 e) ii) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation )	-	0	-
15.1 e) ii) (Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-	0	-
15.1 e) iii) (Sheath: Loss of mass in air oven)	-	2000	-
15.1 e) iv) (Phyaical tests for Sheath : Shrinkage )	-	250	-
15.1 e) iv) (Phyaical tests for Sheath : Shrinkage - Crack observed )	-	0	-
15.1 e) v) (Sheath : Hot deformation)	-	750	-
15.1 e) vi) (Sheath : Heat shock test)	-	350	-
15.1 e) vii) (Sheath : Thermalstability)	-	500	-
15.1 f)(INSULATION RESISTANCE TEST : Volume resistivity )	-	500	-
16.2(HIGH VOLTAGE TEST )	-	1000	-
16.3(FLAMMABILITY TEST : Period of Burning )	-	750	-
16.3(FLAMMABILITY TEST : Unaffected length )	-	750	-
16.9(Oxygen Index Test)	-	1500	-
16.1(Flame Retardance Test on Single Cables)	-	1000	-
16.11(Flame Retardance Test on Bunched Cables)	-	7500	-
16.13(Test for Halogen Acid Gas Evolution)	-	2500	-
16.14(Temperature Index)	-	1500	-
17.1(Manufacturer'. identification)	-	0	-
17.2(cable Indentification )	-	0	-
17.3(cable Code )	-	0	-
15.4 (a)(Cold bend)	-	500	-
15.4 (b)(Cold impact)	-	500	-
Table 1(Ageing in air oven - Elongation on Insulation)	-	1000	-
Table 1(Ageing in air oven - Tensile strength on Insulation)	-	1000	-
Table 1(Ageing in air oven - Elongation on Insulation)	-	1000	-
Table 1(Ageing in air oven - Tensile strength on Insulation)	-	1000	-
Table 4(Copper purity test)	-	750	-
Cl No. 16.15(Smoke density test)	-	4000	-
Table 2(Cold Impact test for Outer sheath)	-	500	-
Table 2(Cold bend test for Outer sheath)	-	500	-
Cl 16(Halogen Acid Gas Test)	-	2500	-
Cl 16(Halogen Acid Gas Test)	-	2500	-
Cl 16(Halogen Acid Gas Test)	-	2500	-

03 Oct, 2027

-
-

10382

ALAIPURIA TEST HOUSE PRIVATE LIMITED, GHAZIABAD

8180426

IS 14255 (1995)

Aertal bunched cables - For working voltages up to and including 1100 Volts - Specification

25000 View breakup
a) For single phase with bare messenger - Rs.12,000/- b) For single Phase with bare messenger & street light conductor – Rs. 14500/- c) For single Phase with insulated messenger – Rs. 16500/- d) For single Phase with insulated messenger & street light conductor – Rs. 20000/- e) For Three phase with bare messenger - Rs. 18,000/- f) For Three Phase with bare messenger & street light conductor – Rs. 20,000/- g) For Three Phase with insulated messenger – Rs. 22,000/- h) For Three Phase with insulated messenger & street light conductor – Rs. 25,000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Phase/Street Lighting conductor)	-	0	-
4.2(Messenger (Neutral Conductor or Otherwise))	-	0	-
5.1(Insulation)	-	0	-
6.1(Flexibility class)	-	0	-
6.2(Compactness)	-	0	-
6.2(No of strands)	-	0	-
6.2(Surface)	-	0	-
6.3(Protective barrier)	-	0	-
6.4(size of street lighting conductor)	-	0	-
6.5(Size of messenger conductor )	-	0	-
6.6(Joints in messenger conductor )	-	0	-
6.6(Direction of outer layer)	-	0	-
7.1(Insulation)	-	0	-
7.2( Thickness of insulation)	-	500	-
7.3(Tolerance on thickness of insulation )	-	0	-
7.4(Aplication of the insulation )	-	0	-
7.5(Colour of the insulation )	-	0	-
8.1(Core identification)	-	0	-
8.2(Core identification)	-	0	-
8.3(Identification by other means)	-	0	-
9.1(Assembly (Laying up))	-	0	-
9.2(Assembly (Laying up))	-	0	-
9.3(Direction of lay)	-	0	-
10.1 a) i)(Tests on phase/street light conductor: tensile test - Test method IS10810:Part 2)	-	500	-
10.1 a) ii)(Wrapping test - 10810: Part 3)	-	250	-
10.1 a) iii)(Resistance test - IS10810: Part 5)	-	500	-
10.1 b) i)(Test on messenger conductor: Breaking load - IS 10810: Part 2)	-	750	-
10.1 b) ii)(Test on messenger conductor: Elongation test - Cl 11.3)	-	750	-
10.1 b) iii)(Test on messenger conductor: Resistance test - IS 10810: Part 5)	-	500	-
10.1 c) i)(Physical tests for XLPE Insulation: Tensile strength - IS 10810: Part 7)	-	500	-
10.1 c) i)(Physical tests for XLPE Insulation: elongation at break - IS 10810: part 7)	-	500	-
10.1 c) ii)(Ageing in air oven : Tensile strength variation - IS 10810:Part 11)	-	1500	-
10.1 c) ii)(Ageing in air oven : Elongation variation- IS 10810: Part 11)	-	1500	-
10.1 c) iii)(Hot set test: Elongation under load - IS 10810: Part 30)	-	500	-
10.1 c) iii)(Hot set test: Permanent elongation (set) after cooling - IS 10810: Part 30)	-	500	-
10.1 c) iv)(Shrinkage test : Shrinkage - 10810:Part 12)	-	400	-
10.1 c) iv)(Shrinkage test : Crack Observed - 10810:Part 12)	-	100	-
10.1 c) v)(Water ahsorption (Gravimetric) - IS 10810: Part 33 )	-	3000	-
10.1 d) i)(Physical test for PE insulation: Tensile strength - IS 10810: Part 7 )	-	1000	-
10.1 d) i)(Physical test for PE insulation: elongation at break - IS 10810: Part 7)	-	1000	-
10.1 d) ii)(Melt flow index- IS 10810: Part 23)	-	1500	-
10.1 d) iv)(Vicat softening point -IS 10810: Part 22)	-	1000	-
10.1 d) v)(Environmental stress cracking -IS 10810:Part29)	-	2500	-
10.1 f)(Insulation resistance (Volume resistivity) test a) volume resistivity at 27°C - IS 10810: Part 43)	-	750	-
10.1 f)(Insulation resistance (Volume resistivity) test b) volume resistivity at 70°C - IS 10810: Part 43)	-	750	-
10.1 g)(High voltage test - IS10810:Part 45)	-	750	-
11.4(Bending Test on the Completed Cable ( Optional) )	-	750	-
11.4(Bending Test on the Completed Cable ( Optional))	-	750	-
10.1 d) iii)(Carbon Black Content)	-	1000	-

03 Oct, 2027

-
-

10383

The Synthetic and Art Silk Mills' Research Association (SASMIRA), MUMBAI

7175004

IS 16703 (2017)

Textiles - High density polyethylene (HDPE) polypropylene (PP) woven sacks for packaging of 25 kg polymer materials - Specification

27600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Mass of Bale)	-	400	-
5.2 Table 1(Dimensions)	-	400	-
5.2 Table 1(Dimensions)	-	400	-
5.2 Table 1(Dimensions)	-	400	-
5.2 Table 1(Dimensions)	-	400	-
5.2 Table 1(Ends per dm)	-	200	-
5.2 Table 1(Picks per dm)	-	200	-
5.2 Table 1(Mass of sack, Gusseted type, g - IS 1964)	-	400	-
5.2 Table 1(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70mm1)] Min, N) (kgf): - IS 1969 (Part 1))	-	500	-
5.2 Table 1(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70mm1)] Min, N2) (kgf): - IS 1969 (Part 1))	-	500	-
5.2 Table 1(Breaking strength of bottom seam (Ravelled strip method), Min, N) (kgf) - IS 9030)	-	1000	-
5.2 Table 1(Elongation at break of fabric (Ravelled strip method), percent : IS 1969 (Part 1))	-	0	included with breaking strength
5.2 Table 1(Elongation at break of fabric (Ravelled strip method), percent : IS 1969 (Part 1))	-	0	included with breaking strength
5.2 Table 1(Drop impact strength)	-	1000	-
(Clauses 4.2, 5.1, 5.2, 5.3 and 5.4) Table 1 (Ash Content ,a) For UV stabilized sacks)	-	900	-
(Clauses 4.2, 5.1, 5.2, 5.3 and 5.4) Table 1 (Ash Content ,b) For non- UV stabilized sacks)	-	900	-
4.6(Capacity)	-	400	-
4.3.1(Bottom Seam)	-	4400	Inclusive of Identification, FTIR analysis, if required, breaking strength of stitching thread, dimension of bottom seam
4.3(Sacks)	-	1600	dimensions of half gusset, fold length, length, width
4.2,5.1,5.2,5.3,5.4(Breaking strenght after U.V. Exposure (Warp/Weft))	-	1000	-
4.2,5.1,5.2,5.3,5.4,(UV Resistance (192 hrs)(100 x 65+92x40))	-	12000	-
4.2(Linear Density)	-	200	-
4.2(Width of tape)	-	400	-
4.6(Capacity)	-	0	-
4.3.1(Bottom Seam)	-	0	-
4.3(Sacks)	-	0	-
4.2,5.1,5.2,5.3,5.4(Breaking strenght after U.V. Exposure (Warp/Weft))	-	0	-
4.2,5.1,5.2,5.3,5.4,(UV Resistance (192 hrs)(100 x 65+92x40))	-	0	-
4.2(Linear Density)	-	0	-
4.2(Width of tape)	-	0	-

14 Dec, 2026

-
-

10384

Spectro Analytical Labs Private Limited, Gautam Buddha Nagar

8130426

IS 2095 : Part 1 (2023)

Gypsum Plaster Boards Specification Part 1 Plain Gypsum Plaster Boards

A, H1, H2, D, F, FH, R1, R2, W

278000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause. 5.0(CaSO4.2H2O)	-	800	-
Clause. 5.0(Free water (Natural / By -product))	-	700	-
Clause. 5.0(pHvalue (Natural / By -product))	-	700	-
Clause. 5.0(SiO2)	-	1000	-
Clause. 5.0(Chloride content)	-	1000	-
Clause. 6.0(Manufacturing)	-	500	-
Clause. 7.0(Dimensions)	-	3000	-
Clause. 7.0(Tolerances)	-	4000	-
Clause. 7.0(Density)	-	2000	-
Clause. 7.0(Flexural Breaking Load)	-	5000	-
Clause. 7.0(Impact Resistance)	-	5000	-
Clause. 7.0(Surface Hardness)	-	1000	-
Clause. 7.0(Loading Capability)	-	2000	-
Clause. 7.0(Water Absorption)	-	1000	-
Clause. 7.0(Finish)	-	500	-
Clause. 7.0(Fire Resistance)	-	250000	-
Clause. 5.0(CaSO4.2H2O)	-	800	-
Clause. 5.0(Free water (Natural / By -product))	-	700	-
Clause. 5.0(pHvalue (Natural / By -product))	-	700	-
Clause. 5.0(SiO2)	-	1000	-
Clause. 5.0(Chloride content)	-	1000	-
Clause. 6.0(Manufacturing)	-	500	-
Clause. 7.0(Dimensions)	-	3000	-
Clause. 7.0(Tolerances)	-	4000	-
Clause. 7.0(Density)	-	2000	-
Clause. 7.0(Flexural Breaking Load)	-	5000	-
Clause. 7.0(Impact Resistance)	-	5000	-
Clause. 7.0(Surface Hardness)	-	1000	-
Clause. 7.0(Loading Capability)	-	2000	-
Clause. 7.0(Water Absorption)	-	1000	-
Clause. 7.0(Finish)	-	500	-
Clause. 7.0(Fire Resistance)	-	250000	-
Clause. 5.0(CaSO4.2H2O)	-	800	-
Clause. 5.0(Free water (Natural / By -product))	-	700	-
Clause. 5.0(pHvalue (Natural / By -product))	-	700	-
Clause. 5.0(SiO2)	-	1000	-
Clause. 5.0(Chloride content)	-	1000	-
Clause. 6.0(Manufacturing)	-	500	-
Clause. 7.0(Dimensions)	-	3000	-
Clause. 7.0(Tolerances)	-	4000	-
Clause. 7.0(Density)	-	2000	-
Clause. 7.0(Flexural Breaking Load)	-	5000	-
Clause. 7.0(Impact Resistance)	-	5000	-
Clause. 7.0(Surface Hardness)	-	1000	-
Clause. 7.0(Loading Capability)	-	2000	-
Clause. 7.0(Water Absorption)	-	1000	-
Clause. 7.0(Finish)	-	500	-
Clause. 7.0(Fire Resistance)	-	250000	-
Cl-5.3(Paper Liner)	-	1000	-

04 Jan, 2030

-
Included w.e.f 17.06.2025

10385

CIPET, Lucknow

9102534

IS 11197 (1985)

Specification for monoaxially oriented polypropylene tapes

15975 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Identification)	-	1050	-
3.1(Melt Flow Rate)	-	1100	-
4.1(Linear Density)	-	700	-
4.2(Tenacity)	-	1100	-
4.3(Elongation of the tape)	-	0	-
4.4(Thickness of the tape)	-	500	-
4.5(Finished Width of The Tape)	-	500	-
4.6(Colour Fastness in case of Pigmented Tapes)	-	10500	-
4.7.1(Dimensional Stability at 100 Deg C for 10 min)	-	700	-
4.7.2(Dimensional Stability at 125 Deg C for 10 min)	-	700	-

31 Dec, 2026

-
Included w.e.f. 20.08.2024

10386

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 410 (1977)

Specification for cold rolled brass sheet, strip and foil (Third Revision)

CuZn30,37,40

15800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.0(Freedom from defects)	-	100	-
6.1 Table-1(Cu)	-	1000	-
6.1 Table-1(Pb)	-	1000	-
6.1 Table-1(Fe)	-	1000	-
6.1 Table-1(Total impurities including iron)	-	2500	-
6.1 Table-1(Zn)	-	1000	-
7.1.1(Tensile Test)	-	2000	-
Table-2(Thickness)	-	100	-
Table-2(Tensile Strength)	-	2000	-
Table-2(Elongation)	-	1000	-
Table-2(Vickers Hardness)	-	700	-
Table-2(Transverse Bend)	-	1000	-
Table-2(Longitudinal Bend)	-	1000	-
7.1.1(Erichsen cupping values -IS 410)	-	800	-
7.1.5(Grain Size - IS 410)	-	1500	-
8(Dimensions -IS 410)	-	1000	-
11(Marking)	-	100	-

31 Dec, 2029

-
Included w.e.f. 02.07.2024

10387

TUV SUD SOUTH ASIA PRIVATE LIMITED, BENGALURU

6180126

IS 616 (2017)

Audio, video and similar electronic apparatus - Safety requirements (Fifth Revision)

Audio, video and similar electronic apparatus

121000 View breakup
Rs.1,21,000/- (10% Discount)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking and instructions)	-	3500	10% discount to BIS
7(Heating under normal operating conditions)	-	9500	10% discount to BIS
8(Constructional requirements with regard to the protection against electric shock)	-	6500	10% discount to BIS
9(Electric shock hazard under normal operating conditions)	-	7000	10% discount to BIS
10(Insulation requirements)	-	8000	10% discount to BIS
11(Fault conditions)	-	9000	10% discount to BIS
12(Mechanical strength)	-	9000	10% discount to BIS
13(CLEARANCES and CREEPAGE DISTANCES)	-	7000	10% discount to BIS
14(Components)	-	8000	10% discount to BIS
15(TERMINALS)	-	8000	10% discount to BIS
17(Electrical connections and mechanical fixings)	-	6500	10% discount to BIS
19(Stability and mechanical hazards)	-	6000	10% discount to BIS
20(Resistance to fire)	-	4000	10% discount to BIS
Annex-A(Additional requirements for apparatus with protection against splashing water)	-	5000	10% discount to BIS
16(External flexible cords)	-	6000	10% discount to BIS
20.2.4(Printed Boards)	-	0	-
3(General requirements)	-	4000	--
4(General test conditions)	-	4000	-
Annex-B(Apparatus to be connected to the TELECOMMUNICATION NETWORKS)	-	6000	-
Annex-L(Additional requirements for electronic flash apparatus for photographic purposes)	-	4000	-
Cl.5.1 of Cl.5(General requirements)	-	0	-
Cl.5.1-i) of Cl.5(Comprehensible and easily discernible)	-	0	-
Cl.5.1-ii) of Cl.5(Permanent durability against water and petroleum spirit)	-	0	-
Cl.5.2 of Cl.5(Identification and supply ratings)	-	0	-
Cl.5.2 a) of Cl.5(Identification, maker)	-	0	-
Cl.5.2 b) of Cl.5(Model number or type reference)	-	0	-
Cl.5.2 d) of Cl.5(Nature of supply)	-	0	-
Cl.5.2 e) of Cl.5(Rated supply voltage)	-	0	-
Cl.5.2 f) of Cl.5(Mains frequency if safety dependant)	-	0	-
Cl.5.2 g) of Cl.5(Rated current or power consumption for apparatus supplied by supply apparatus for general use, on apparatus or in instruction manual: Measured current or power consumption: Deviation % (max 10%):)	-	0	-
Cl.5.2 h) of Cl.5(Rated current or power consumption for apparatus intended for connection to an a.c. mains supply:Measured current or power consumption for Television set: Deviation % (max 10%):)	-	0	-
Cl.5.2 h)-ii) of Cl.5(Graphical symbols placed on the apparatus, whether required by this standard or not, shall be in accordance with IEC 60417 or ISO 3864-2 or ISO 7000, if available. In the absence of suitable symbols, the manufacturer may design specific graphical symbols.)	-	0	-
Cl.5.2 h)-iii) of Cl.5(Care shall be taken so that additional markings and instructions not required by this standard do not contradict the markings and instructions required by this standard . Symbols placed on the Equipment shall be explained in the user manual.)	-	0	-
Cl.5.3 of Cl.5(Terminals)	-	0	-
Cl.5.3a) of Cl.5(Earth terminal)	-	0	-
Cl.5.3b) of Cl.5(Hazardous live terminals)	-	0	-
Cl.5.3c) of Cl.5(Markings on supply output terminals)	-	0	-
Cl.5.4 of Cl.5(Caution marking)	-	0	-
Cl.5.4a) of Cl.5(Use of triangle with exclamation mark)	-	0	-
Cl.5.4b) of Cl.5(Marking on loudspeaker grille, IEC 60417-5036)	-	0	-
Cl.5.4c) of Cl.5(User-replaceable coin / button cell battery marking)	-	0	-
Cl.5.5 of Cl.5(Instructions)	-	0	-
Cl.5.5.1 of Cl.5.5(Safety relevant information)	-	0	-
Cl.5.5.2 a) of Cl.5.5(Mains powered equipment not exposed to dripping or splashing. Warning concerning objects filled with liquid, etc.)	-	0	-
Cl.5.5.2 b) of Cl.5.5(Hazardous live terminals, instructions for wiring)	-	0	-
Cl.5.5.2 c) of Cl.5.5(Instructions for replacing lithium battery)	-	0	-
Cl.5.5.2 d) of Cl.5.5(Class I earth connection warning)	-	0	-
Cl.5.5.2 e) of Cl.5.5(Instructions for multimedia system connection)	-	0	-
Cl.5.5.2 f) of Cl.5.5(Special stability warning for attachment of the apparatus to the floor/wall)	-	0	-
Cl.5.5.2 g) of Cl.5.5(Warning: battery exposure to heat)	-	0	-
Cl.5.5.2 h) of Cl.5.5(Warning: protective film on CRT face)	-	0	-
Cl.5.5.2 i) of Cl.5.5("Warning: Non-floor standing TV >7kg")	-	0	-
Cl.5.5.2 j) of Cl.5.5("Warning: User replaceable coin / button cell battery")	-	0	-
Cl.5.5.3 (a-b) of Cl.5.5(Disconnect device: plug/coupler or all-pole mains switch location, accessibility and markings)	-	0	-
Cl.5.5.3 c) of Cl.5.5(Instructions for permanently connected equipment)	-	0	-
Cl.5.5.3 c) i) of Cl.5.5(Marking, signal lamps or similar for completely disconnection from the mains)	-	0	-
Cl.7.1 of Cl.7(General)	-	0	-
"Cl.7.1.1 of Cl.7.1 Table-3"(Requirements)	-	0	-
"Cl.7.1.2 of Cl.7.1 Table-3"(Accessible parts)	-	0	-
"Cl.7.1.3 of Cl.7.1 Table-3"(Parts, other than windings and printed boards, providing electrical insulation)	-	0	-
"Cl.7.1.4 of Cl.7.1 Table-3"(Parts acting as a support or a mechanical barrier)	-	0	-
"Cl.7.1.5 of Cl.7.1 Table-3"(Windings)	-	0	-
"Cl.7.1.6 of Cl.7.1 Table-3"(Parts not subject to a limit under7.1.1 to 7.1.4)	-	0	-
Cl.7.2 of Cl.7(Softening temperature of insulating material supporting parts conductively connected to the mains carrying a current> 0.2 A, shall be at least 150ºC)	-	0	-
Cl.8.1 of Cl.8(Conductive parts covered by lacquer, paper, untreated textile oxide films and beads etc. considered to be bare*)	-	0	-
Cl.8.2 of Cl.8(No shock hazard when changing voltage setting device, fuse-links or handling drawers etc.)	-	0	-
Cl.8.3 of Cl.8(Insulation of hazardous live parts not provided by hygroscopic material)	-	0	-
Cl.8.4 of Cl.8(No risk of electric shock from accessible parts or from parts rendered accessible following the removal of a cover which can be removed by hand)	-	0	-
Cl.8.5 of Cl.8(Class I apparatus*)	-	0	-
Cl.8.5 ii) of Cl.8(Resistors bridging basic insulation shall complying with 14.1 a) *)	-	0	-
Cl.8.5 iii) of Cl.8(Capacitors bridging basic insulation shall complying with 14.2.1 a) *)	-	0	-
Cl.8.5 iv) of Cl.8(Protective earthing terminal *)	-	0	-
Cl.8.6 of Cl.8(Class II apparatus)	-	0	-
Cl.8.6 a) of Cl.8(Basic and supplementary insulation between hazardous live parts and accessible parts *)	-	0	-
Cl.8.6 b) of Cl.8(Reinforced insulation between hazardous live parts and accessible parts *)	-	0	-
Cl.8.7 of Cl.8(Components bridging insulation)	-	0	-
Cl.8.7 i) of Cl.8(Basic insulation bridged by components complying with 14.4.5.3)	-	0	-
Cl.8.7 ii) of Cl.8(Components bridging basic, supplementary, double or reinforced insulation complying with 14.2 a) or 14.4)	-	0	-
Cl.8.7 iii) of Cl.8(Basic and supplementary insulation each being bridged by a capacitor or RC-unit complying with 14.3.2 a))	-	0	-
Cl.8.7 iv) of Cl.8(Double or reinforced insulation being bridged with 2 capacitors or RC-units in series complying with 14.3.2 a))	-	0	-
Cl.8.7 v) of Cl.8(Double or reinforced insulation being bridged with a single capacitor or RC-unit complying with 14.3.2 b))	-	0	-
Cl.8.8 of Cl.8(Insulation thickness and thin sheet materials)	-	0	-
Cl.8.8 i) of Cl.8(Basic or supplementary insulation > 0,4 mm (mm)*)	-	0	-
Cl.8.8 ii) of Cl.8(Reinforced insulation > 0,4 mm (mm) *)	-	0	-
Cl.8.8 iii) of Cl.8(Thin sheet material used inside the equipment)	-	0	-
Cl.8.8 iv) of Cl.8(Basic or supplementary insulation, atleast two layers, each meeting10.4)	-	0	-
Cl.8.8 v) of Cl.8(Basic or supplementary insulation, three layers any two of which meet10.4)	-	0	-
Cl.8.8 vi) of Cl.8(Reinforced insulation, two layers each of which meet 10.4)	-	0	-
Cl.8.9 of Cl.8(Adequate insulation between internal hazardous live conductors and accessible parts, or between internal hazardous live parts and conductors connected to accessible parts)	-	0	-
Cl.8.10 of Cl.8(Double insulation between accessible parts and conductors connected to the mains)	-	0	-
Cl.8.10 of Cl.8(Double insulation between conductors connected to accessible parts and parts connected to the mains)	-	0	-
Cl.8.11 of Cl.8(Detaching of wires)	-	0	-
Cl.8.11 i) of Cl.8(Noun due reduction of creepage or clearance distances if wires become detached)	-	0	-
Cl.8.11 ii) of Cl.8(Vibration test carried out)	-	0	-
Cl.8.12 of Cl.8(Adequate fastening of windows, lenses, lamp covers etc. (pull test 20 N for 10 s))	-	0	-
Cl.8.13 of Cl.8(Adequate fastening of windows, lenses, lamp covers etc. (pull test 20 N for 10 s))	-	0	-
Cl.8.14 of Cl.8(No risk of damage to the insulation of internal wiring due to hot parts or sharp edges)	-	0	-
Cl.8.15 of Cl.8(Only special supply equipment can be used*)	-	0	-
Cl.8.18 of Cl.8(Disconnection from the mains)	-	0	-
Cl.8.18 i) of Cl.8(Disconnect device used in apparatus)	-	0	-
Cl.8.18 ii) of Cl.8(All-pole switch or circuit breaker with >3mm contact separation.)	-	0	-
Cl.8.18 iii) of Cl.8(Mains switch ON indication *)	-	0	-
Cl.8.19 of Cl.8(Switch not fitted in the mains cord *)	-	0	-
Cl.8.20 of Cl.8(Bridging components comply with clause 14)	-	0	-
Cl.8.21 of Cl.8(Non-separable thin sheet material)	-	0	-
Cl.9.1 of Cl.9(Testing on the outside)	-	0	-
Cl.9.1.1 of Cl.9.1(Requirements)	-	0	-
Cl.9.1.1 i) of Cl.9.1(Accessible parts shall not be hazardous live)	-	0	-
Cl.9.1.1 ii) of Cl.9.1(Inaccessible terminals are not accessible or comply with relevant requirements)	-	0	-
Cl.9.1.1 iii) of Cl.9.1(For voltages >1000 V ac or >1500 V dc complies with clause 13.3.1 for basic insulation)	-	0	-
Cl.9.1.1.2 of Cl.9.1.1(Determination of hazardous live parts)	-	0	-
Cl.9.1.1.2 a) of Cl.9.1.1(Open circuit voltages)	-	0	-
Touch current measured from terminal devices using the network in annex D(Touch current measured from terminal devices using the network in annex D)	-	0	-
Cl.9.1.1.2 c) of Cl.9.1.1(The charge exceeds 45 μC)	-	0	-
Cl.9.1.1.2 d) of Cl.9.1.1(Energy of discharge not exceeding 350 mJ)	-	0	-
Cl.9.1.1.3 of Cl.9.1.1(Test with test finger and test probe)	-	0	-
Cl.9.1.2 of Cl.9.1(Shafts of operating knobs, handles, levers and the like)	-	0	-
Cl.9.1.3 of Cl.9.1(Openings ofthe enclosure)	-	0	-
Cl.9.1.4 of Cl.9.1(Terminals)	-	0	-
Cl.9.1.4 i) of Cl.9.1(Terminals)	-	0	-
Cl.9.1.4 ii) of Cl.9.1(Terminals)	-	0	-
Cl.9.1.5 of Cl.9.1(Pre-set controls)	-	0	-
Cl.9.1.6 of Cl.9.1(Withdrawal of the mains plug:)	-	0	-
Cl.9.1.6 i) of Cl.9.1(Withdrawal of the mains plug:)	-	0	-
Cl.9.1.6 ii) of Cl.9.1(Withdrawal of the mains plug:)	-	0	-
Cl.9.1.6 iii) of Cl.9.1(Withdrawal of the mains plug:)	-	0	-
Cl.9.1.7 of Cl.9.1(Resistance to external forces)	-	0	-
Cl.9.1.7 a) of Cl.9.1(Resistance to external forces)	-	0	-
Cl.9.1.7 b) of Cl.9.1(Resistance to external forces)	-	0	-
Cl.9.1.7 c) of Cl.9.1(Resistance to external forces)	-	0	-
Cl.9.2 of Cl.9(Removal of protective covers)	-	0	-
Cl.10.2 of Cl.10(Surge Test)	-	0	-
Cl.10.2 a) of Cl.10(Surge Test)	-	0	-
Cl.10.2 b) of Cl.10(Surge Test)	-	0	-
Cl.10.2 b) (i) of Cl.10(Surge Test)	-	0	-
Cl.10.2 b) (ii) of Cl.10(Surge Test)	-	0	-
Cl.10.2 b) (iii) of Cl.10(Surge Test)	-	0	-
Cl.10.3 of Cl.10(Humidity treatment)	-	0	-
Cl.10.4 of Cl.10(Insulation resistance and dielectric strength)	-	0	-
Cl.10.4.1 of Cl.10.4(Insulation of the insulating materials)	-	0	-
Cl.10.4.2 of Cl.10.4(Between parts of different polarity directly connected to the mains Between parts of different polarity directly connected to the mains)	-	0	-
Cl.10.4.2 i) of Cl.10.4(Between parts separated by BASIC or SUPPLEMENTARY insulation)	-	0	-
Cl.10.4.2 ii) of Cl.10.4(Between parts separated by REINFORCED insulation)	-	0	-
Cl.11.1 of Cl.11(Electric Shock Hazard)	-	0	-
Cl.11.1 a) of Cl.11(Electric Shock Hazard)	-	0	-
Cl.11.1 b) of Cl.11(Electric Shock Hazard)	-	0	-
Cl.11.2 of Cl.11(Heating)	-	0	-
Cl.11.2.1 of Cl.11.2(Requirements)	-	0	-
Cl.11.2.1 i) of Cl.11.2(No danger of fire to the surroundings)	-	0	-
Cl.11.2.1 ii) of Cl.11.2(Safety not impaired by abnormal heat)	-	0	-
Cl.11.2.1 of Cl.11.2(Flames extinguish within 10 seconds)	-	0	-
Cl.11.2.1 of Cl.11.2(No hazard from softening solder)	-	0	-
Cl.11.2.1 of Cl.11.2(Soldered terminations not used as protective mechanism)	-	0	-
Cl.11.2.2 of Cl.11.2(Measurement of temperature rises)	-	0	-
Cl.11.2.3 of Cl.11.2(Accessible parts)	-	0	-
Cl.11.2.4 of Cl.11.2(Parts, other than windings and printed boards, providing electrical insulation)	-	0	-
Cl.11.2.5 of Cl.11.2(Parts acting as a support or a mechanical barrier)	-	0	-
Cl.11.2.6 of Cl.11.2(Windings )	-	0	-
Cl.11.2.7 of Cl.11.2(Printed boards)	-	0	-
Cl.11.2.7 i) of Cl.11.2(Printed boards)	-	0	-
Cl.11.2.7 i) a) of Cl.11.2(Printed boards)	-	0	-
Cl.11.2.7 i) b) of Cl.11.2(Printed boards)	-	0	-
Cl.11.2.7 ii) of Cl.11.2(Printed boards)	-	0	-
Cl.11.2.7 iii) of Cl.11.2(Printed boards)	-	0	-
Cl.11.2.8 of Cl.11.2(Parts not subject to a limit under7.1.1 to 7.1.4)	-	0	-
Cl.12.1.1 of Cl.12.1(Requirements)	-	0	-
Cl.12.1.2 of Cl.12.1(Bump test )	-	0	-
Cl.12.1.3 of Cl.12.1(Vibration test)	-	0	-
Cl.12.1.4 of Cl.12.1(Impact test)	-	0	-
Cl.12.1.4 i) of Cl.12.1(Impact test)	-	0	-
Cl.12.1.4 ii) of Cl.12.1(Impact test)	-	0	-
Cl.12.1.5 of Cl.12.1(Drop test)	-	0	-
Cl.12.1.6 of Cl.12.1(Stress relief test)	-	0	-
Cl.12.2 of Cl.12(Fixing of actuating elements)	-	0	-
Cl.12.3 of Cl.12(Remote control devices held in hand)	-	0	-
Cl.12.4 of Cl.12(Drawers )	-	0	-
Cl.12.5 of Cl.12(Antenna coaxial sockets mounted on the apparatus)	-	0	-
Cl.12.5 a) of Cl.12(Endurance test,)	-	0	-
Cl.12.5 b) of Cl.12(Impact test,)	-	0	-
Cl.12.5 c) of Cl.12(Torque test)	-	0	-
Cl.12.6 of Cl.12(Telescoping or rod antennas)	-	0	-
Cl.12.6.1 of Cl.12.6(General requirements)	-	0	-
Cl.12.6.1 i) of Cl.12.6(General requirements)	-	0	-
Cl.12.6.2 of Cl.12.6(Physical securement)	-	0	-
Cl.12.7 of Cl.12(Apparatus containing coin / button cell batteries)	-	0	-
Cl.12.7.1 of Cl.12.7(Coin/button cell batteries with a diameter of 32 mm or less.)	-	0	-
Cl.12.7.2 of Cl.12.7(Construction requirementss)	-	0	-
Cl.12.7.3 of Cl.12.7(Tests)	-	0	-
Cl.12.7.3.2 of Cl.12.7.3(Stress relief test)	-	0	-
Cl.12.7.3.3 of Cl.12.7.3(Battery replacement test)	-	0	-
Cl.12.7.3.4 of Cl.12.7.3(Drop test)	-	0	-
Cl.12.7.3.5 of Cl.12.7.3(Impact test)	-	0	-
Cl.12.7.3.6 of Cl.12.7.3(Crush test)	-	0	-
Cl.12.7.4 of Cl.12.7(Compliance)	-	0	-
Cl.13.1 of Cl.13(General)	-	0	-
Cl.13.2 of Cl.13(Determination of Working voltage)	-	0	-
Cl.13.3 of Cl.13(Clearances)	-	0	-
Cl.13.3.1 of Cl.13.3(General)	-	0	-
Cl.13.3.2 of Cl.13.3(Clearances in circuits conductively connected to the mains)	-	0	-
Cl.13.3.3 of Cl.13.3(Clearances in circuits not conductively connected to the mains)	-	0	-
Cl.13.3.4 of Cl.13(Measurement of transient voltages)	-	0	-
Cl.13.4 a) of Cl.13(Creepage distances )	-	0	-
Cl.13.4 b) of Cl.13(Creepage distances )	-	0	-
Cl.13.4 c) of Cl.13(Creepage distances )	-	0	-
Cl.13.6 a) of Cl.13(Jointed insulation )	-	0	-
Cl.13.6 b) of Cl.13(Jointed insulation )	-	0	-
Cl.13.6 c) of Cl.13(Jointed insulation )	-	0	-
Cl.13.6 d) of Cl.13(Jointed insulation )	-	0	-
Cl.13.7 of Cl.13(Enclosed and sealed parts)	-	0	-
Cl.13.8 of Cl.13(Parts filled with insulating compound, meeting the requirements of 8.8)	-	0	-
Cl.15.1 of Cl.15(Plugs and Sockets*)	-	0	-
Cl.15.1.1 of Cl.15.1(Plugs and Sockets*)	-	0	-
Cl.15.1.1 i) of Cl.15.1(Plugs and Sockets*)	-	0	-
Cl.15.1.1 ii) of Cl.15.1(Plugs and Sockets*)	-	0	-
Cl.15.1.2 of Cl.15.1(Design of connectors other than for mains power *)	-	0	-
Cl.15.1.2 i) of Cl.15.1(Design of sockets with symbol of 5.3 b) design *)	-	0	-
Cl.15.1.3 of Cl.15.1(Design of terminals and connectors used in output circuits of supply apparatus*)	-	0	-
Cl.15.2 of Cl.15(Provisions for protective earthing)	-	0	-
Cl.15.2 i) of Cl.15(Provisions for protective earthing)	-	0	-
Cl.15.2 ii) of Cl.15(Provisions for protective earthing)	-	0	-
Cl.15.2 iii) of Cl.15(Provisions for protective earthing)	-	0	-
Cl.15.2 iv) of Cl.15(Provisions for protective earthing)	-	0	-
Cl.15.2 v) of Cl.15(Provisions for protective earthing)	-	0	-
Cl.15.3 of Cl.15(Terminals for external flexible cords and for permanent connection to the mains supply*)	-	0	-
Cl.15.3.1 of Cl.15.3(Adequate terminals for connection of permanent wiring*)	-	0	-
Cl.15.3.2 of Cl.15.3(Reliable connection of non-detachable cords)	-	0	-
Cl.15.3.2 i) of Cl.15.3(Not soldered to conductors of a printed circuit board)	-	0	-
Cl.15.3.2 ii) of Cl.15.3(Adequate clearances and creepage distances between connections should a wire break away)	-	0	-
Cl.15.3.2 iii) of Cl.15.3(Wire secured by additional means to the conductor)	-	0	-
Cl.15.3.3 of Cl.15.3(Screws and nuts clamping conductors have adequate threads: ISO 261, ISO 262 or similar*)	-	0	-
Cl.15.3.4 of Cl.15.3(Conductors adequately fixed (two independent fixings) *)	-	0	-
Cl.15.3.5 of Cl.15.3(Terminals allow connection of conductors having appropriate cross-sectional area)	-	0	-
Cl.15.3.6 of Cl.15.3(Terminals to 15.3.3 have sizes required by table 16)	-	0	-
Cl.15.3.7 of Cl.15.3(Terminals clamp conductors between metal and have adequate pressure)	-	0	-
Cl.15.3.7 i) of Cl.15.3(Terminals designed to avoid conductor slipping out when tightened)	-	0	-
Cl.15.3.7 ii) of Cl.15.3(Terminals adequately fixed when tightened or loosened (no loosening, wiring not stressed, distances not reduced))	-	0	-
Cl.15.3.8 of Cl.15.3(Terminals carrying a current more than)	-	0	-
Cl.15.3.8 i) of Cl.15.3(0.2 A, contact pressure not transmitted by insulating material except ceramic*)	-	0	-
Cl.15.3.9 of Cl.15.3(Termination of non-detachable cords: wires terminated near to each other)	-	0	-
Cl.15.3.9 i) of Cl.15.3(Terminals located and shielded: test with 8 mm strand)	-	0	-
Cl.15.4 of Cl.15(Devices forming a part of the mains plug*)	-	0	-
Cl.15.4.1 of Cl.15.4(No undue strain on mains socket-outlets.)	-	0	-
Cl.15.4.1 i) of Cl.15.4(Device shall be tested on the equipment as per Fig.11: Torque to be applied : 0.25 Nm (Max))	-	0	-
Cl.15.4.2 of Cl.15.4(Device complies with standard for dimensions of mains plugs)	-	0	-
Cl.15.4.3 of Cl.15.4(Device has adequate mechanical strength (tests a,b,c))	-	0	-
Cl.16.1 a) of Cl.16(Mains supply flexible cords shall be sheathed type, complying with IEC 60227 for PVC cords or as per IEC 60245 for synthetic rubber cords)	-	0	-
Cl.16.1 b) of Cl.16(Non-detachable cords for Class I have green/yellow core for protective earth)	-	0	-
Cl.16.2 of Cl.16(Mains cords conductors shall have a nominal cross-sectional area not less than the values given in Table 18, for rated current consumption of the apparatus)	-	0	-
Cl.16.3 a) of Cl.16(Flexiblecordsnotcomplyingwith16.1, used for interconnections between separate units of equipment used in combination and carrying hazardous live voltages, have adequate dielectric strength as perCl.10.3)	-	0	-
Cl.16.4 of Cl.16(Flexible cords used for connection between equipment have adequate cross-sectional areas to avoid temperature rise under normal and fault conditions)	-	0	-
Cl.16.5 a) of Cl.16(Adequate strain relief on external flexible cords)	-	0	-
Cl.16.5 b) of Cl.16(Not possible to push cord back into equipment)	-	0	-
Cl.16.5 c) of Cl.16(Strain relief device unlikely to damage flexible cord)	-	0	-
Cl.16.5 d) of Cl.16(For mains cords of Class I equipment, hazardous live conductors become taut before earth conductor)	-	0	-
Cl.16.6 of Cl.16(Apertures for external flexible cord: no risk of damage to the cord during assembly or movement in use)	-	0	-
Cl.16.7 a) of Cl.16(Transportable apparatus fitted with detachable cord sets with appliance inlet as perIEC60320-1 or)	-	0	-
Cl.16.7 b) of Cl.16(Transportable apparatus shall have a means of stowage to protect the cord)	-	0	-
17.1 a) of Cl.17(Screws are loosened and then tightened with a torque according to table20)	-	0	-
Cl.17.1 b) of Cl.17(5 times in the case of screws operating in a thread of metal)	-	0	-
Cl.17.1 c) of Cl.17(10 times in the case of screws operating in wood or in a thread in insulating material:)	-	0	-
Cl.17.2 of Cl.17(Correct introduction of screws into female threads in non-metallic material)	-	0	-
Cl.17.3 a) of Cl.17(Screws or other fixing devices intended to fix Covers, legs, stands or the like, shall be captive in order to prevent replacement during servicing by screws or other fixing devices……)	-	0	-
Cl.17.3 b) of Cl.17(Non-captive fixing screws: no hazard when replaced by a screw whose length is 10 times its diameter)	-	0	-
Cl.17.4 of Cl.17(No loosening of conductive parts carrying a current > 0.2 A)	-	0	-
Cl.17.5 of Cl.17(Contact pressure not transmitted through plastic other than ceramic for connections carrying a current > 0.2 A*)	-	0	-
Cl.17.6 of Cl.17(Stranded conductors of flexible supply cords carrying a current > 0.2 A with screw terminals not consolidated by solder *)	-	0	-
Cl.17.7 of Cl.17(Cover fixing devices other than screws have adequate strength and their positioning is unambiguous)	-	0	-
Cl.17.8 of Cl.17(Detachable legs or stands supplied by the manufacturer of the apparatus shall be delivered with the relevant fixing means *)	-	0	-
Cl.17.9 a) of Cl.17(Internal pluggable connections, affecting safety, unlikely to become disconnected)	-	0	-
Cl.17.9 b) of Cl.17(By applying a 2N pull force in any direction to the connection, in case of doubt)	-	0	-
Cl.19.1 of Cl.19(Stability and mechanical hazards)	-	0	-
Cl.19.1 of Cl.19(Stability requirements)	-	0	-
Cl.19.1 i) of Cl.19(Stability requirements)	-	0	-
Cl.19.2 of Cl.19(Test at 10° to the horizontal)	-	0	-
Cl.19.3 of Cl.19(Vertical force test )	-	0	-
Cl.19.4 of Cl.19(Horizontal force test)	-	0	-
Cl.19.5 of Cl.19(Test of edges and corners)	-	0	-
Cl.19.6 of Cl.19(Mechanical strength of glass)	-	0	-
Cl.19.6.1 of Cl.19.6(Requirements)	-	0	-
Cl.19.6.2 of Cl.19.6(Fragmentation test)	-	0	-
Cl.19.7 of Cl.19(Wall or ceiling mounting means)	-	0	-
Cl.19.7.1 of Cl.19..7(Requirements)	-	0	-
Cl.19.7.3 of Cl.19.7(Compliance)	-	0	-
Cl.20.1 of Cl.20(Requirements)	-	0	-
Cl.20.2 of Cl.20(Electrical components and mechanical parts)	-	0	-
Cl.20.2.1 a) of Cl.20.2(Exemption for components contained in an enclosure of material V-0 to IEC60695- 11-10 with openings not exceeding 1 mm in width)	-	0	-
Cl.20.2.1 b) of Cl.20.2(Exemption for small components)	-	0	-
Cl.20.2.2 of Cl.20.2(Electrical components )	-	0	-
Cl.20.2.3 of Cl.20.2(Internal wiring)	-	0	-
Cl.20.2.5 of Cl.20.2(Components and parts not covered by 20.2.2, 20.2.3 and 20.2.4)	-	0	-
Cl.20.2.5 i) of Cl.20.2(Components and parts not covered by 20.2.2, 20.2.3 and 20.2.4)	-	0	-
Cl.20.2.5 ii) of Cl.20.2(Components and parts not covered by 20.2.2, 20.2.3 and 20.2.4)	-	0	-
Cl.20.3 of Cl.20(Fire enclosure*)	-	0	-
Cl.20.3.1 of Cl.20.3(Fire enclosure*)	-	0	-
Cl.20.3.2 of Cl.20.3(Fire enclosure*)	-	0	-
Cl.20.3.3 of Cl.20.3(Fire enclosure*)	-	0	-
8.16/ H 2.2/ H 2.3(Requirements for insulated winding wires for use without additional interleaved insulation)	-	0	-
8.16(Wound Component)	-	0	-
Cl.5.2 h)-i) of Cl.5(appliance coupler for Class I is used for Class II equipment with functional earth connection, the requirements of Clause 15 and Clause 16 related to Class I construction shall be applied up to the connecting point of the protective(earthing) conductor to the functional earth.)	-	0	-
Cl.5.5 of Cl.5(Instructions)	-	0	-
Cl.5.5 of Cl.5(Instructions)	-	0	-
Cl.8.5 i) of Cl.8(Basic insulation between hazardous live parts and earthed accessible parts *)	-	0	-
Cl.8.16 of Cl.8(Insulated winding wire without additional interleaved insulation)	-	0	-
Cl.20.2.4 of Cl.20.2(Printed boards)	-	0	-
Cl.20.2.4 i) of Cl.20.2(Printed boards)	-	0	-
14(Components)	-	0	-
15(Internal wires and power cords)	-	0	-
18(Mechanical strength of Picture tubes and protection against the effect of implosion)	-	0	-

11 Sep, 2027

-
Exclusion: Cl.6.1 (Inonization radiation), Cl.6.2 (Laser radiations), Cl.6.3 (Light emitting diodes), Cl.18 (Mechanical strength of picture tubes and protection against the effect of implosion), 16.3b (Cord Bending Test)

10388

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 14650 (2023)

UNALLOYED AND ALLOYED STEEL INGOT AND SEMI-FINISHED PRODUCTS FOR RE-ROLLING PURPOSES - SPECIFICATION (First Revision)

Billets ,slabs, blooms

7900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause - 7.1(CARBON)	-	1000	10000/- Rs. Extra for Optional test.
Clause - 7.1(SULPHUR)	-	1000	10000/- Rs. Extra for Optional test.
Clause - 7.1(PHOSPHURS)	-	1000	10000/- Rs. Extra for Optional test.
Clause - 7.1(MANGANESE)	-	1000	10000/- Rs. Extra for Optional test.
Clause - 7.1(NITROGEN)	-	1500	10000/- Rs. Extra for Optional test.
As per Clause 10(Dimension)	-	50	10000/- Rs. Extra for Optional test.
As per Clause 10.1(Dimension Width)	-	50	10000/- Rs. Extra for Optional test.
As per Clause 10.1(Dimension Thickness)	-	50	10000/- Rs. Extra for Optional test.
As per Clause 10.2(Dimension Length)	-	50	10000/- Rs. Extra for Optional test.
As per Clause 11/11.1/11.2/11.3/11.4(Tolerances)	-	50	10000/- Rs. Extra for Optional test.
As per Clause 11.5(Bend)	-	150	10000/- Rs. Extra for Optional test.
As per Clause 11.6(Camber)	-	100	10000/- Rs. Extra for Optional test.
As per Clause 11.7 (i)(Out of Square)	-	50	10000/- Rs. Extra for Optional test.
As per Clause 11.7 (ii)(Round Corners)	-	50	10000/- Rs. Extra for Optional test.
As per Clause 11.7 (iii)(Ridges due to gas cutting)	-	100	10000/- Rs. Extra for Optional test.
As per Clause 11.7 (iv)(Taper (Width variation on top and bottom surface at one location)	-	100	10000/- Rs. Extra for Optional test.
As per Clause 11.7 (v)(Edge slanting (Width variation on top and bottom surface at one location)	-	50	10000/- Rs. Extra for Optional test.
As per Clause 11.7 (vi)(Convexity(Difference in thickness from edge to curve)	-	50	10000/- Rs. Extra for Optional test.
As per Clause 11.7 (vii)(Chamfering (Length variation on top and bottom surface at one location)	-	50	10000/- Rs. Extra for Optional test.
As per Clause 11.7 (viii)(Wedge (Thickness variation at the edges along the cross section)	-	50	10000/- Rs. Extra for Optional test.
As per Clause 11.7 (ix)(Scarfing pits)	-	50	10000/- Rs. Extra for Optional test.
As per Clause 12/12.1/12.2/12.3(Freedom from defects)	-	50	10000/- Rs. Extra for Optional test.
Clause. 13(Macro examination test.)	-	3500	10000/- Rs. Extra for Optional test.
Clause. 13(Macro examination test.)	-	3500	10000/- Rs. Extra for Optional test.
Clause. 13(Sulphur print.)	-	3500	10000/- Rs. Extra for Optional test.
Clause. 13(Inclusion content)	-	3000	10000/- Rs. Extra for Optional test.
Clause. 14(Marking)	-	0	10000/- Rs. Extra for Optional test.
Clause.15(Ordering information)	-	300	10000/- Rs. Extra for Optional test.
Clause.6.0(Manufacture)	-	0	10000/- Rs. Extra for Optional test.
Clause.7.1(Silicon)	-	1000	10000/- Rs. Extra for Optional test.
Clause.7.1(Carbon Equbalant)	-	1200	10000/- Rs. Extra for Optional test.
Clause.7.1(Microalloy element)	-	100	10000/- Rs. Extra for Optional test.

31 Dec, 2029

-
Included w.e.f. 19.04.2024.

10389

Hi Physix Laboratory India Private Limited, Pune

7126926

IS 16270 (2023)

Secondary cells and batteries for solar photovoltaic application - General requirements and methods of test

upto 120V/200A, upto 18V/500A

2320000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(Photovoltaic Energy System)	-	0	-
Cl-4.2(Secondary Cells and Batteries)	-	0	-
Cl-4.3(General Operating Conditions)	-	0	-
Cl-4.3.8(Storage)	-	0	-
Cl-4.3.9(Operating Temperature)	-	0	-
Cl-5.1(Mechanical Endurance)	-	0	-
Cl-5.2(Charge Efficiency)	-	0	-
Cl-5.3(Deep Discharge Protection)	-	0	-
Cl-5.4(Marking)	-	5000	-
Cl-5.5(Safety)	-	2500	-
Cl-5.6(Documentation)	-	2500	-
Cl-6(Functional characteristice)	-	0	-
Cl-7(General test conditions)	-	0	-
Cl-8.1(Capacity Test)	-	80000	Rs. 40000/ for upto 250AH, Rs.50000 for > 250 to 500AH, Rs. 60000 for > 500 to 1000AH, Rs. 80000 for > 1000 to 2500AH
Cl-8.2(Endurance Test)	-	630000	Rs. 315000/ for upto 250AH, Rs.383750 for > 250 to 500AH, Rs. 472500 for > 500 to 1000AH, Rs. 630000 for > 1000 to 2500AH
Cl-8.3(Charge Retention Test)	-	200000	Rs. 100000/ for upto 250AH, Rs.125000 for > 250 to 500AH, Rs. 150000 for > 500 to 1000AH, Rs. 200000 for > 1000 to 2500AH
Cl-8.4(Cycle Endurance in Photovoltaic Application (Extreme Conditions))	-	1200000	Rs. 600000/ for upto 250AH, Rs.750000 for > 250 to 500AH, Rs. 900000 for > 500 to 1000AH, Rs. 1200000 for > 1000 to 2500AH
Cl-8.5(Sulphation Test (Applicable for Lead Acid Batteries only))	-	60000	Rs. 30000/ for upto 250AH, Rs.40000 for > 250 to 500AH, Rs. 45000 for > 500 to 1000AH, Rs. 60000 for > 1000 to 2500AH
Cl-8.6(Water Loss Test (Valid for Flooded Lead Acid Batteries only))	-	140000	Rs. 70000/ for upto 250AH, Rs. 87500 for > 250 to 500AH, Rs. 105000 for > 500 to 1000AH, Rs. 140000 for > 1000 to 2500AH
Cl-9.1(Type Tests)	-	2320000	Only for type test as per cl. 9.1
Cl-9.2(Acceptance Test)	-	85000	Only for acceptance test as per cl .9.2
Cl-4.1(Photovoltaic Energy System)	-	0	-
Cl-4.2(Secondary Cells and Batteries)	-	0	-
Cl-4.3(General Operating Conditions)	-	0	-
Cl-4.3.8(Storage)	-	0	-
Cl-4.3.9(Operating Temperature)	-	0	-
Cl-5.1(Mechanical Endurance)	-	0	-
Cl-5.2(Charge Efficiency)	-	0	-
Cl-5.3(Deep Discharge Protection)	-	0	-
Cl-5.4(Marking)	-	0	-
Cl-5.5(Safety)	-	0	-
Cl-5.6(Documentation)	-	0	-
Cl-6(Functional characteristice)	-	0	-
Cl-7(General test conditions)	-	0	-
Cl-8.1(Capacity Test)	-	0	-
Cl-8.2(Endurance Test)	-	0	-
Cl-8.3(Charge Retention Test)	-	0	-
Cl-8.4(Cycle Endurance in Photovoltaic Application (Extreme Conditions))	-	0	-
Cl-8.5(Sulphation Test (Applicable for Lead Acid Batteries only))	-	0	-
Cl-8.6(Water Loss Test (Valid for Flooded Lead Acid Batteries only))	-	0	-
Cl-9.1(Type Tests)	-	0	-
Cl-9.2(Acceptance Test)	-	0	-

20 Jun, 2028

-
Included w.e.f. 27.08.2024

10390

CIPET, Lucknow

9102534

IS 17399 (2020)

Textiles - Polypropylene ( PP )/ High Density Polyethylene ( HDPE ) Laminated Woven Sacks for Mail Sorting, Storage, Transport and Distribution - Specification

34505 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(MANUFACTURE - Raw Materials)	-	1050	-
5.2(MANUFACTURE - Fabric for PP tapes & for HDPE tapes)	-	500	-
5.2- Table 1- i)("REQUIREMENTS - Inside dimensions a) Bottom panel (L × W), mm b) Open top (L × W), mm c) Height (H), mm")	-	500	-
5.2- Table 1- ii)(REQUIREMENTS - Ends per dm)	-	500	-
5.2- Table 1- iii)(REQUIREMENTS - Picks per dm)	-	500	-
5.2- Table 1- iv)(REQUIREMENTS - Mass of laminated sack, g)	-	500	-
5.2- Table 1- v)(REQUIREMENTS - Breaking strength of laminated fabric (Cut strip method1)), Min, N2) (kgf) a) Lengthwise b) Widthwise)	-	500	-
5.2- Table 1- vi)(REQUIREMENTS - Seam strength of bottom and side panel seam (Cut strip method), Min, N2), (kgf))	-	500	-
5.2- Table 1- vii)("REQUIREMENTS - Elongation at break of fabric, percent: a) Lengthwise b) Widthwise")	-	500	-
5.2- Table 1- viii)(REQUIREMENTS - Ash content, Max, percent (a) For UV stabilized sacks (b) For non-UV stabilized sacks)	-	500	-
5.3(Lamination)	-	1050	-
5.4(Sack Fabrication)	-	500	-
5.5(Capacity)	-	500	-
6.1- Table 1- i)(REQUIREMENTS - Inside dimensions a) Bottom panel (L × W), mm b) Open top (L × W), mm c) Height (H), mm)	-	500	-
6.1- Table 1- ii)(REQUIREMENTS - Ends per dm)	-	500	-
6.1- Table 1- iii)(REQUIREMENTS - Picks per dm)	-	500	-
6.1- Table 1- iv)(REQUIREMENTS - Mass of laminated sack, g)	-	500	-
6.1- Table 1- v)(REQUIREMENTS - Breaking strength of laminated fabric (Cut strip method1)), Min, N2) (kgf))	-	1100	-
6.1- Table 1- vi)(REQUIREMENTS - Seam strength of bottom and side panel seam (Cut strip method), Min)	-	1100	-
6.1- Table 1- vii)(REQUIREMENTS - Elongation at break of fabric, percent a) Lengthwise b) Widthwise)	-	0	-
6.1- Table 1- viii)(REQUIREMENTS - Ash content, Max, percent (a) For UV stabilized sacks (b) For non-UV stabilized sacks)	-	1200	-
6.4(UV Resistance Test)	-	10180	-
7(PRINTING, PACKAGING AND MARKING)	-	500	-
8(ATMOSPHERIC CONDITIONS FOR SAMPLE CONDITIONING AND TESTING)	-	1100	-
Clause 5.1(Raw Materials)	-	1050	-
"Clause 5.2 Table 1(i)"(Inside dimensions)	-	500	-
"Clause 5.2 Table 1(ii)"(Ends per dm)	-	500	-
"Clause 5.2 Table 1(i)"(Inside dimensions)	-	500	-
"Clause 5.2 Table 1(iii)"(Picks per dm)	-	500	-
"Clause 5.2 Table 1(iv)"("Mass of laminated sack, g")	-	500	-
"Clause 5.2 Table 1(v)"("Breaking strength of laminated fabric")	-	1100	-
"Clause 5.2 Table 1(vi)"(Seam strength of bottom and side panel seam)	-	1100	-
"Clause 5.2 Table 1(vii)"("Elongation at break of fabric, percent:")	-	0	-
"Clause 5.2 Table 1(viii)"("Ash content, Max, percent")	-	1200	-
Clause 5.3(Lamination with a thin film of polypropylene)	-	1050	-
Clause 5.4(Sack Fabrication)	-	500	-
Clause 7.3(Marking on Sacks)	-	500	-
Clause 5.1(Raw Materials)	-	1050	-
"Clause 5.2 Table 1(i)"(Inside dimensions)	-	500	-
"Clause 5.2 Table 1(iii)"(Picks per dm)	-	500	-
"Clause 5.2 Table 1(iv)"("Mass of laminated sack, g")	-	500	-
"Clause 5.2 Table 1(v)"("Breaking strength of laminated fabric")	-	1100	-
"Clause 5.2 Table 1(vi)"(Seam strength of bottom and side panel seam)	-	1100	-
"Clause 5.2 Table 1(vii)"("Elongation at break of fabric, percent:")	-	0	-
"Clause 5.2 Table 1(viii)"("Ash content, Max, percent")	-	1200	-
Clause 5.3(Lamination with a thin film of polypropylene)	-	1050	-
Clause 7.3(Marking on Sacks)	-	500	-
"Clause 5.2 Table 1(ii)"(Ends per dm)	-	500	-
5.1(MANUFACTURE - Raw Materials)	-	1050	-
5.2(MANUFACTURE - Fabric for PP tapes & for HDPE tapes)	-	1050	-
5.2- Table 1- i)("REQUIREMENTS - Inside dimensions a) Bottom panel (L × W), mm b) Open top (L × W), mm c) Height (H), mm")	-	500	-
5.2- Table 1- ii)(REQUIREMENTS - Ends per dm)	-	500	-
5.2- Table 1- iii)(REQUIREMENTS - Picks per dm)	-	500	-
5.2- Table 1- iv)(REQUIREMENTS - Mass of laminated sack, g)	-	500	-
5.2- Table 1- v)(REQUIREMENTS - Breaking strength of laminated fabric (Cut strip method1)), Min, N2) (kgf) a) Lengthwise b) Widthwise)	-	1100	-
5.2- Table 1- vi)(REQUIREMENTS - Seam strength of bottom and side panel seam (Cut strip method), Min, N2), (kgf))	-	1100	-
5.2- Table 1- vii)("REQUIREMENTS - Elongation at break of fabric, percent: a) Lengthwise b) Widthwise")	-	0	-
5.2- Table 1- viii)(REQUIREMENTS - Ash content, Max, percent (a) For UV stabilized sacks (b) For non-UV stabilized sacks)	-	1200	-
5.3(Lamination)	-	1050	-
5.4(Sack Fabrication)	-	500	-
5.5(Capacity)	-	500	-
6.1- Table 1- i)(REQUIREMENTS - Inside dimensions a) Bottom panel (L × W), mm b) Open top (L × W), mm c) Height (H), mm)	-	500	-
6.1- Table 1- ii)(REQUIREMENTS - Ends per dm)	-	500	-
6.1- Table 1- iii)(REQUIREMENTS - Picks per dm)	-	500	-
6.1- Table 1- iv)(REQUIREMENTS - Mass of laminated sack, g)	-	500	-
6.1- Table 1- v)(REQUIREMENTS - Breaking strength of laminated fabric (Cut strip method1)), Min, N2) (kgf))	-	1100	-
6.1- Table 1- vi)(REQUIREMENTS - Seam strength of bottom and side panel seam (Cut strip method), Min)	-	1100	-
6.1- Table 1- vii)(REQUIREMENTS - Elongation at break of fabric, percent a) Lengthwise b) Widthwise)	-	0	-
6.1- Table 1- viii)(REQUIREMENTS - Ash content, Max, percent (a) For UV stabilized sacks (b) For non-UV stabilized sacks)	-	1200	-
6.4(UV Resistance Test)	-	10180	-
7(PRINTING, PACKAGING AND MARKING)	-	500	-
8(ATMOSPHERIC CONDITIONS FOR SAMPLE CONDITIONING AND TESTING)	-	1200	-
Clause 5.1(Raw Materials)	-	1050	-
"Clause 5.2 Table 1(i)"(Inside dimensions)	-	500	-
"Clause 5.2 Table 1(ii)"(Ends per dm)	-	500	-
"Clause 5.2 Table 1(i)"(Inside dimensions)	-	500	-
"Clause 5.2 Table 1(iii)"(Picks per dm)	-	500	-
"Clause 5.2 Table 1(iv)"("Mass of laminated sack, g")	-	500	-
"Clause 5.2 Table 1(v)"("Breaking strength of laminated fabric")	-	500	-
"Clause 5.2 Table 1(vi)"(Seam strength of bottom and side panel seam)	-	500	-
"Clause 5.2 Table 1(vii)"("Elongation at break of fabric, percent:")	-	0	-
"Clause 5.2 Table 1(viii)"("Ash content, Max, percent")	-	1200	-
Clause 5.3(Lamination with a thin film of polypropylene)	-	1050	-
Clause 5.4(Sack Fabrication)	-	500	-
Clause 7.3(Marking on Sacks)	-	500	-
Clause 5.1(Raw Materials)	-	1050	-
"Clause 5.2 Table 1(i)"(Inside dimensions)	-	500	-
"Clause 5.2 Table 1(iii)"(Picks per dm)	-	500	-
"Clause 5.2 Table 1(iv)"("Mass of laminated sack, g")	-	500	-
"Clause 5.2 Table 1(v)"("Breaking strength of laminated fabric")	-	1100	-
"Clause 5.2 Table 1(vi)"(Seam strength of bottom and side panel seam)	-	1100	-
"Clause 5.2 Table 1(vii)"("Elongation at break of fabric, percent:")	-	0	-
"Clause 5.2 Table 1(viii)"("Ash content, Max, percent")	-	1200	-
Clause 5.3(Lamination with a thin film of polypropylene)	-	1050	-
Clause 7.3(Marking on Sacks)	-	500	-
"Clause 5.2 Table 1(ii)"(Ends per dm)	-	500	-

31 Dec, 2026

-
Included w.e.f. 20.08.2024

10391

CIPET, Lucknow

9102534

IS 16709 (2017)

Textiles - Polypropylene (PP) woven, laminated, block bottom valve sacks for packaging of 50 kg cement - Specification

18088 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.1(Sack Length)	-	500	-
4.1.2(Sack Width)	-	500	-
4.1.3(Top Closure Width and Bottom Closure Width)	-	500	-
4.1.4(Patch Length)	-	500	-
4.1.5(Patch Height)	-	500	-
4.1.6(Length of Valve)	-	500	-
4.1.7(Width of Valve Sleeve)	-	500	-
4.1.8(Length of Valve Sleeve)	-	500	-
5.1(Raw Material)	-	2000	-
5.2(Fabric)	-	500	-
5.2(Tape density and width)	-	500	-
5.4(Lamination for PP)	-	2000	-
5.4(Lamination for LDPE)	-	2000	-
6.1(Mass of Bale)	-	500	-
6.2.1(Breaking Strength and Elongation at Break of Fabric)	-	1600	1100+ 500 (Specimen)
6.2.2(Weld Strength of Top and Bottom Closures)	-	1100	-
6.3(Drop Impact Testing of Filled Sacks)	-	1100	-
6.4(Ash Content)	-	1200	-
6.5(Air Permeability)	-	1100	-
8(Atomspheric Conditions for Conditioning and Testing)	-	1100	-
4.1.1(Sack Length)	-	500	-
4.1.2(Sack Width)	-	500	-
4.1.3(Top Closure Width and Bottom Closure Width)	-	500	-
4.1.4(Patch Length)	-	500	-
4.1.5(Patch Height)	-	500	-
4.1.6(Length of Valve)	-	500	-
4.1.7(Width of Valve Sleeve)	-	500	-
4.1.8(Length of Valve Sleeve)	-	500	-
5.1(Raw Material)	-	1050	-
5.2(Fabric)	-	500	-
5.2(Tape density and width)	-	500	-
5.4(Lamination for PP)	-	500	-
5.4(Lamination for LDPE)	-	500	-
6.1(Mass of Bale)	-	500	-
6.2.1(Breaking Strength and Elongation at Break of Fabric)	-	1100	-
6.2.2(Weld Strength of Top and Bottom Closures)	-	1100	-
6.3(Drop Impact Testing of Filled Sacks)	-	1100	-
6.4(Ash Content)	-	1200	-
6.5(Air Permeability)	-	1100	-
8(Atomspheric Conditions for Conditioning and Testing)	-	1200	-
Cl-5.6(Capacity)	-	500	-
Cl- 6.6, Table.-1 (ii)(Ends per dm)	-	500	-
Cl-6.6, Table-1 (iii)(Picks per dm)	-	500	-
Cl.6.6, Table-1 (vii)(Elongation at break of fabric)	-	1100	-
4.1.1(Sack Length)	-	500	-
4.1.2(Sack Width)	-	500	-
4.1.3(Top Closure Width and Bottom Closure Width)	-	500	-
4.1.4(Patch Length)	-	500	-
4.1.5(Patch Height)	-	500	-
4.1.6(Length of Valve)	-	500	-
4.1.7(Width of Valve Sleeve)	-	500	-
4.1.8(Length of Valve Sleeve)	-	500	-
5.1(Raw Material)	-	1050	-
5.2(Fabric)	-	500	-
5.2(Tape density and width)	-	700	-
5.4(Lamination for PP)	-	1050	-
5.4(Lamination for LDPE)	-	1050	-
6.1(Mass of Bale)	-	500	-
6.2.1(Breaking Strength and Elongation at Break of Fabric)	-	1100	-
6.2.2(Weld Strength of Top and Bottom Closures)	-	1100	-
6.3(Drop Impact Testing of Filled Sacks)	-	1100	-
6.4(Ash Content)	-	1200	-
6.5(Air Permeability)	-	1200	-
8(Atomspheric Conditions for Conditioning and Testing)	-	1200	-
Cl-5.6(Capacity)	-	500	-
Cl- 6.6, Table.-1 (ii)(Ends per dm)	-	500	-
Cl-6.6, Table-1 (iii)(Picks per dm)	-	500	-
Cl.6.6, Table-1 (vii)(Elongation at break of fabric)	-	1100	-
4.1.1(Sack Length)	-	500	-
4.1.2(Sack Width)	-	500	-
4.1.3(Top Closure Width and Bottom Closure Width)	-	500	-
4.1.4(Patch Length)	-	500	-
4.1.5(Patch Height)	-	500	-
4.1.6(Length of Valve)	-	500	-
4.1.7(Width of Valve Sleeve)	-	500	-
4.1.8(Length of Valve Sleeve)	-	500	-
5.1(Raw Material)	-	1050	-
5.2(Fabric)	-	500	-
5.2(Tape density and width)	-	700	-
5.4(Lamination for PP)	-	500	-
5.4(Lamination for LDPE)	-	500	-
6.1(Mass of Bale)	-	500	-
6.2.1(Breaking Strength and Elongation at Break of Fabric)	-	1100	-
6.2.2(Weld Strength of Top and Bottom Closures)	-	1100	-
6.3(Drop Impact Testing of Filled Sacks)	-	1100	-
6.4(Ash Content)	-	1200	-
6.5(Air Permeability)	-	1200	-
8(Atomspheric Conditions for Conditioning and Testing)	-	1200	-
Cl-5.6(Capacity)	-	500	-
Cl- 6.6, Table.-1 (ii)(Ends per dm)	-	500	-
Cl-6.6, Table-1 (iii)(Picks per dm)	-	500	-
Cl.6.6, Table-1 (vii)(Elongation at break of fabric)	-	1100	-

31 Dec, 2026

-
Included w.e.f 19.07.2024

10392

ALAIPURIA TEST HOUSE PRIVATE LIMITED, GHAZIABAD

8180426

IS 1554 : Part 1 (1988)

Specification for pvc insulated (Heavy Duty) electric cables: Part 1 for working voltages up to and including 1100 v (Third Revision)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(MATERIALS : CONDUCTOR)	-	0	-
4.1.1(INSULATION : General Purjose Insulaiion)	-	0	-
4.1.2(INSULATION : Heat Resisting Insulation)	-	0	-
5.1(MATERIALS : FILLER AND INNER SHEATH)	-	0	-
5.2(MATERIALS : FILLER AND INNER SHEATH)	-	0	-
6.1(MATERIALS : ARMGURING)	-	0	-
6.2(MATERIALS : ARMGURING)	-	0	-
7.1.1(OUTER SHEATH : For Cables with General Purpose InsuIafion)	-	0	-
7.1.2(OUTER SHEATH : For Cables with Heat Resisting InsuIalion)	-	0	-
8.1(CONSTRUCTION : CONDUCTOR)	-	0	-
8.2(CONSTRUCTION : CONDUCTOR)	-	0	-
9.1(INSULATION )	-	0	-
9.2(INSULATION : Thickness of Insulation)	-	500	-
9.3(INSULATION :Tolerance on Thickness of Insulation)	-	0	-
9.4(INSULATION : Application of Insulation)	-	0	-
10.1(CORE IDENTIFICATION)	-	0	-
10.2(CORE IDENTIFICATION)	-	0	-
10.3(CORE IDENTIFICATION)	-	0	-
10.3.1(Arrangement of Marking)	-	0	-
11.1(LAYING UP OF CORES)	-	0	-
11.2(LAYING UP OF CORES)	-	0	-
12.1(INNER SHEATH)	-	0	-
12.2(INNER SHEATH)	-	0	-
12.3(INNER SHEATH :Thickness of Inner Sheath)	-	250	-
12.3.1(INNER SHEATH :Thickness of Inner Sheath)	-	250	-
13.1.1(ARMOURING : Application)	-	0	-
13.1.2(Armouring: Coverage )	-	250	-
13.1.3(ARMOURING : Direction of lay )	-	0	-
13.1.4(ARMOURING : Application)	-	0	-
13.2(ARMOURING : Type of Armour)	-	0	-
13.2.1(ARMOURING : Type of Armour)	-	0	-
13.3(Armouring : Dimensions -Wire Diameter)	-	250	-
13.3(Armouring : Dimensions -Formed wire )	-	250	-
13.4(ARMOURING : Joints)	-	0	-
13.5.1(ARMOURING : Resistance)	-	500	-
13.5.2(ARMOURING : Resistance)	-	500	-
13.6 a)(ARMOURING: Tensile Strength)	-	250	-
13.6 b)(ARMOURING: Elongation )	-	250	-
13.6 c)(ARMOURING: Torsion Test (For round wire ) )	-	250	-
13.6 d)(ARMOURING: Winding Test(For formed wire))	-	250	-
13.6 e)(ARMOURING: Uniformity of zinc coating)	-	350	-
13.6 f)(ARMOURING: Mass of zinc coating )	-	350	-
13.6 g)(ARMOURING: Resistivity)	-	350	-
14.1(OUTER SHEATH)	-	0	-
14.2(OUTER SHEATH)	-	0	-
14.3(OUTER SHEATH : Colour )	-	0	-
14.4.1(Thickness of Outer Sheath : Unarmowed Cables)	-	250	-
14.4.2(Thickness of Outer Sheath : Armoured Cables)	-	250	-
15.1 a) 1)(Tests on conductor : Annealing test ( for copper ))	-	500	-
15.1 a) 2)(Tensile test (for aluminium) - Before stranding )	-	350	-
15.1 a) 2)(Tensile test (for aluminium) - After stranding )	-	350	-
15.1 a) 3)(Tests on conductor : Wrapping test ( for aluminium ))	-	250	-
15.1 a) 4)(Tests on conductor : Conductor resistance test)	-	750	-
15.1 a) 4)(Resistance test - Neutral conductor )	-	500	-
15.1 d)1)(Phyaical tests for insulation : Tensile Test)	-	500	-
15.1 d)1)(Phyaical tests for insulation : Elongation )	-	500	-
15.1 d)1)(Physical tests for sheath : Tensile stregth )	-	250	-
15.1 d)1)(Physical tests for sheath : Elongation )	-	250	-
15.1 d)2)(Phyaical tests for insulation- Ageing in air Oven : Tensile Test)	-	1000	-
15.1 d)2)(Phyaical tests for insulation - Ageing in air oven : Elongation )	-	1000	-
15.1 d)2)(Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-	0	-
15.1 d)2)(Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-	0	-
15.1 d)2)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-	0	-
15.1 d)2)(Physical tests for outer sheath -Ageing in air oven : Elongation )	-	0	-
15.1 d)2)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation )	-	0	-
15.1 d)2)(Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-	0	-
15.1 d)3)(Phyaical tests for insulation : Shrinkage )	-	250	-
15.1 d)3)(Phyaical tests for insulation : Shrinkage - Crack observed )	-	0	-
15.1 d)3)(Phyaical tests for Sheath : Shrinkage )	-	250	-
15.1 d)3)(Phyaical tests for Sheath : Shrinkage - Crack observed )	-	0	-
15.1 d)4)(Hot deformation : Insulation )	-	500	-
15.1 d)4)(Hot deformation : Sheath )	-	500	-
15.1 d)5)( Loss of mass in air oven- Insulation )	-	1000	-
15.1 d)5)( Loss of mass in air oven- sheath )	-	1000	-
15.1 d)6)(Heat shock test- Insulation )	-	250	-
15.1 d)6)(Heat shock test- sheath )	-	250	-
15.1 d)7)(Thermal stability- insulation )	-	350	-
15.1 d)7)(Thermal stability- Sheath )	-	350	-
15.1 e)(Insulation resistance test : Volume Resistivity )	-	750	-
15.1 e)(Insulation resistance test : IR Constant )	-	0	-
15.1 f)(High voltage test ( water immersion test ))	-	750	-
15.1 g)(High voltage test at room temperature)	-	500	-
15.1 g)(High voltage test at room temperature)	-	500	-
15.4 a)(Cold bend test- Insulation ( Optional test))	-	500	-
15.4 a)(Cold bend test- Sheath ( Optional test))	-	500	-
15.4 b)(Cold impact test- Insulation ( Optional test))	-	500	-
15.4 b)(Cold impact test- Sheath ( Optional test))	-	500	-
15.4 c)(Armour resistance test ( for other than mining cables ).- Optional test )	-	350	-
16.1(DETAILS OF TESTS : General)	-	0	-
16.2(DETAILS OF TESTS : High Voltage Test at Room Temperature)	-	0	-
16.3.1(High Voltage Test ( Water Immersion Test ) : a.c. Test)	-	0	-
16.3.2(High Voltage Test ( Water Immersion Test ) : d.c. Test)	-	750	-
16.4(Flammability Test)	-	1000	-
16.5(Oxygen Index Test)	-	1500	-
16.6(Flame Retardance Test on Single Cables)	-	1000	-
16.7(Flame Retardance Test on Bunched Cables)	-	6000	-
16.9(Test for Halogen Acid Gas Evolution)	-	2500	-
16.1(Temperature Index)	-	1500	-
17.1(IDENTIFICATION : Manufacturer’s Identification)	-	0	-
17.2(IDENTIFICATION : Cable Identification)	-	0	-
17.2.1(IDENTIFICATION : Cable Identification)	-	0	-
17.3(IDENTIFICATION : Cable Code)	-	0	-
15.1.e(Insulation resistance Test- Insulation resistance At Maximum rated temperature temperature)	-	0	-
15.1.e(Insulation resistance Test- Insulation resistance constant At Room temperature)	-	0	-
15.1.e(Insulation resistance Test- Volume Resistivity At Maximum rated temperature temperature)	-	0	-
15.1.e(Insulation resistance Test- Volume Resistivity At Room temperature)	-	0	-
16.4(Flammability Test- Un affected portion)	-	0	-
16.4(Flammability Test- Period of Burning)	-	0	-
9.3(Minimum Thickness of Reduce core insulation)	-	0	-
9.2(Thickness of Reduce core insulation)	-	0	-
3.1 Table 2 IS 8130(Number of wires in the conductor)	-	0	-
Cl No. 16.10(Smoke density test)	-	6000	-
Cl No. 16.8(Test for specific optical density of smoke)	-	2500	-
Table 4(Copper purity test)	-	750	-

03 Oct, 2027

-
-

10393

CTL TESTING LABORATORY PRIVATE LIMITED, JAIPUR

8180306

IS 8360 (2022)

Fabricated Polyethylene Fittings for Water Supply ï¿½ Specification (First Revision)

9500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Materials)	-	4500	-
5(Sizes and Designation of Fittings)	-	300	-
6(Visual Appearance)	-	300	-
7(Dimensions of Fittings)	-	500	-
8.1(Hydraulic Characteristics)	-	4500	-
8.2(Tensile Strength for Butt-Fusion)	-	2000	-
9.1.2(Type Tests for Fittings Sizes)	-	4500	-
9.2.2(Lot)	-	200	-
9.2.3(Visual and Dimensional Requirements for Fabricated PE Fittings)	-	200	-
9.2.4.1(Fittings sizes up to 560 mm)	-	500	-
9.2.4.2(Fittings sizes including and above 630 mm)	-	500	-
10(Marking)	-	200	-

24 Sep, 2027

-
Upto and included 500 mm Nominal Dia.

10394

WELL TECH TEST AND RESEARCH CENTER, DERABASSI

9177306

IS 15658 (2021)

Concrete Paving Blocks - Specification ( First Revision )

M30,35,40,50,55 THICK- 50MM-120MM SINGLE & DOUBLE LAYER

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 7.2, Table No. 2, SI No. (ii) (Indivdual Length, L)	-	100	-
Clause 7.2, Table No. 2, SI No. (ii) (Length, L)	-	100	-
Clause 7.2, Table No. 2, SI No. (i) (Indivdual Width, W)	-	100	-
Clause 7.2, Table No. 2, SI No. (i) (Width, W)	-	100	-
Clause 7.2, Table No. 2, SI No. (iii) (Indivdual Thickness, Th)	-	100	-
Clause 7.2, Table No. 2, SI No. (iii) (Thickness, Th)	-	100	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Depth)	-	100	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Depth)	-	100	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Width)	-	100	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Width)	-	100	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Indivdual Plan Area (Asp))	-	0	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Plan Area (Asp))	-	0	-
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Indivdual Ratio of wearing face area and Plan area (Asw/Asp))	-	200	-
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Ratio of wearing face area and Plan area (Asw/Asp))	-	200	-
Clause 7.2 & 9.1.3, Table 2, SI No. (ix)(Deviation from squareness)	-	100	-
10(Marking)	-	0	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Indivdual Thickness of wearing Layer)	-	200	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Thickness of wearing Layer)	-	200	-
Clause 7.3 & 9.1.4, Table 3, SI No. (i) a)( Indivdual Water absorption)	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (i) b)(Water absorption (Average of three test specimens))	-	1500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) a)(Indivdual Compressive strength (i))	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) b)(Compressive strength (Average of eight test specimens))	-	1000	-
Clause 7.2, Table No. 2, SI No. (iv) (Aspect Ratio, L/Th)	-	100	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) i)( Indivdual Dry Abrasion Resistance )	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) ii)(Dry Abrasion resistance (Average of three test specimens))	-	1000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) i)( Indivdual Wet Abrasion Resistance )	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) ii)(Wet Abrasion resistance (Average of three test specimens))	-	2000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) a)(Indivdual Tensile splitting strength (i))	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) b)(Average Tensile splitting strength )	-	1000	-
Clause 7.3, Annex F(Individual Failure Load per unit Length)	-	0	-
Clause 7.3, Annex F(Average Failure Load per unit Length)	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (v) a)(Indivdual Flexural strength (i))	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (v) b)(Average Flexural strength )	-	1000	-
Clause 7.3, Annex G(Individual Breaking Load)	-	0	-
Clause 7.3, Annex G(Average Breaking Load)	-	0	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 10 cycles)	-	100	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 25 cycles)	-	100	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 50 cycles)	-	100	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Cumulative Weight losses of specimen after 10, 25 & 50 cycles)	-	100	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 10 cycles)	-	100	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 25 cycles)	-	100	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 50 cycles)	-	100	-
Clause 6.3 (Bonding and Delamination between the layers of paver blocks)	-	100	-
Clause 7.1.3 (Colour and Texture)	-	100	-
Clause 7.1.1 (General Quality)	-	100	-
Clause 3.20(Spacer nibs)	-	100	-

30 Mar, 2027

-
-

10395

CIPET, Lucknow

9102534

IS 18482 (2023)

Textiles - Sandwich extrusion laminated polypropylene PP woven sacks for packaging bulk commodities - Specification

46880 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Sack Type)	-	500	-
5.2.1(Fabric)	-	500	-
5.2.2(Linear density of tapes)	-	500	-
5.2.4(Unlaminated fabric mass)	-	500	-
5.3.1.1.1(Mass of BOPP film in sandwich extrusion lamination)	-	500	-
5.3.1.1.2(Polypropylene coating mass for sandwich extrusion lamination of BOPP film with base PP woven fabric)	-	500	-
5.3.1.1.3(Total mass of BOPP film laminated woven fabric)	-	500	-
5.3.1.2.1(Mass of nonwoven fabric in sandwich extrusion lamination)	-	500	-
5.3.1.2.2(Polypropylene coating mass for sandwich extrusion lamination of non woven fabric with base PP woven fabric)	-	500	-
5.3.1.2.3(The total mass of nonwoven laminated woven fabric)	-	500	-
5.4.1(Sack)	-	500	-
5.4.1.1(Centre seam)	-	500	-
5.4.1.2(Bottom seam)	-	500	-
5.4.2(Sack)	-	500	-
5.4.3(Sack)	-	500	-
5.4.5(Liner)	-	500	-
6.1.1, Table 1(Inside length)	-	500	-
6.1.1, Table 1(Inside width)	-	500	-
6.1.1, Table 1(Gusset width)	-	500	-
6.1.1, Table 1(Warp per dm)	-	500	-
6.1.1, Table 1(Weft per dm)	-	500	-
6.1.1, Table 1(Mass of laminated fabric)	-	500	-
6.2, Table 1(Average breaking strength - Lengthwise)	-	1100	-
6.2, Table 1(Average breaking strength - Widthwise)	-	1100	-
6.2, Table 1(Breaking strength of bottom seam)	-	1100	-
6.2, Table 1(Breaking strength of centre seam)	-	1100	-
6.2, Table 1(Average elongation at break of fabric - Lengthwise)	-	0	-
6.2, Table 1(Average elongation at break of fabric - Widthwise)	-	0	-
6.3(Average breaking strength - Lengthwise after UV exposure)	-	1100	-
6.3(Average breaking strength - Widthwise after UV exposure)	-	1100	-
6.4(Drop Impact Testing of Filled Sacks)	-	1100	-
Clause 5.4.5.3("Free from pin holes (except for air removal perforations), patches, tears, blisters, and any other visible defects")	-	500	-
Clause 6.2.2(Stitch strength)	-	500	-
Clause 6.2.2(Weld seam strength)	-	1100	-
Clause 5.4.5.3("Free from pin holes (except for air removal perforations), patches, tears, blisters, and any other visible defects")	-	0	-
Clause 6.2.2(Stitch strength)	-	0	-
Clause 6.2.2(Weld seam strength)	-	0	-
Clause 6.5 Table 1 viii(Ash content)	-	1100	-

31 Dec, 2026

-
Included w.e.f. 20.08.2024

10396

CTL TESTING LABORATORY PRIVATE LIMITED, JAIPUR

8180306

IS 13488 (2008)

Irrigation equipment - Emitting pipe systems - Specification (First Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Materials - shall be resistant to fertilizers and chemicals commonly employed in irrigation, and shall be suitable for use with water at temperatures up to 60°C and at pressures designed for the emitting pipe)	-	1000	-
5.1.2 (Ref. Cl 4.1.a of IS 12786 : 1989)(Potyethylene - higher olefins constituent )	-	1000	-
5.1.2 (Ref. Cl 4.1.b of IS 12786 : 1989)(Potyethylene - anti-oxidant)	-	1500	-
5.1.2 (Ref. Cl 4.1.c.i of IS 12786 : 1989)(Density)	-	1000	-
5.1.2 (Ref. Cl 4.1.c.ii of IS 12786 : 1989)(Toluene extract - Annex A of IS 12786:1989)	-	1000	-
5.1.2 (Ref. Cl 4.1.c.iii of IS 12786 : 1989)(Volatile matter - Annex B of IS 12786:1989)	-	1500	-
5.1.2 (Ref. Cl 4.1.c & 4.2.a of IS 12786 : 1989)(Carbon Black content - IS 2530 : 1963)	-	1500	-
5.1.2 (Ref. Cl 4.2.b of IS 12786 : 1989)(The dispersion of Carbon Black content shall be satisfactory - IS 2530 : 1963)	-	1500	-
5.1.2 (Ref. Cl 4.3 of IS 12786 : 1989)(Addition of not more than 10 percent of the manufactures own rework material produced during the manufacture and works testing of pipe complying with this standard is permitted. No other rework material shall be used)	-	0	-
6.2.2(Fittings)	-	200	-
6.3(General)	-	200	-
6.3(General)	-	200	-
8.1.2(Uniformity of Emission Rate for Unregulated Emitting Pipes)	-	1000	-
8.1.3(Uniformity of Emission Rate for Regulated Emitting Pipes)	-	1000	-
8.2(Emission Rate of Emitting Unit as a Function of Inlet Pressure)	-	1500	-
8.2.1(Unregu/Qt~d Emining Pipe)	-	0	-
8.2.2(Regulated Emitting Pipes)	-	0	-
8.3.1(Wall Thickness ofEmitting Pipe)	-	500	-
8.3.2(Inside Diameter ofEmitting Pipe)	-	500	-
8.3.3(Flow Paths in Emitting Unit)	-	1000	-
8.3.4(Spacing ofEmitter Units)	-	200	-
8.4.1(Resistance to Hydrostatic Pressure at Ambient Temperature)	-	4000	-
8.4.2(Resistance to Hydrostatic Pressure at Elevated Temperature)	-	4000	-
8.5(Resistance to Tension at Elevated Temperature)	-	3200	-
8.5(Resistance to Tension at Elevated Temperature)	-	3200	-
8.5(Resistance to Tension at Elevated Temperature)	-	3200	-
8.6(Resistance to Pull Out of Joints Between Fitting and Emitting IS 13479)	-	1200	-
8.7.1(Resistance of PE Emitting Pipe to Environmental Stress Cracking -Acceptance Test Annex D of IS 12786)	-	2500	-
8.7.2(Resistance of PE Emitting Pipe to Environmental Stress Cracking - Type Test Annex D of IS 12786)	-	2500	-
8.8(Determination of Emitting Unit Exponent)	-	3500	-
9.1(DESIGNATION - Non regulated Emitting Pipe)	-	0	-
9.2(DESIGNATION - Regulated Emitting Pipe)	-	0	-
4.1 a(Identification)	-	0	-
4.1 a(Identification)	-	0	-
4.1 c(Volatile matter Extract)	-	0	-
4.1 d(Density)	-	500	-
4.1 d(MFI @ 1900C/2.16 Kg)	-	1000	-
4.2(Carbon black content)	-	1500	-
4.2(Carbon black dispersion)	-	1000	-
5.1(Materials)	-	500	-
6.1.1, Table 1,(i)(Nominal Diameter)	-	500	-
6.1.1, Table 1,(ii)(Inside Diameter)	-	500	-
6.1.1, Table 1,(iii)(Tolerance on I.D)	-	500	-
6.1.1, Table 1,(iv)(Wall Thickness)	-	500	-
6.2(Fittings)	-	0	-
6.3(General)	-	0	-
7.1(Test Specimens)	-	0	-
7.2(Order of Tests)	-	0	-
7.3(Testing Conditions)	-	0	-
7.4(Accuracy of Measuring Devices)	-	0	-
8.1(Uniformity of Emission Rate)	-	500	-
8.1.2(Unregulated Emitting Pipes)	-	250	-
8.1.3(Regulated Emitting Pipes)	-	250	-
8.2(Emission Rate of Emitting Unit as a Function of Inlet Pressure)	-	0	-
8.2.1(Unregulated Emitting Pipes)	-	0	-
8.2.2(Regulated Emitting Pipes)	-	0	-
8.3.1(Wall Thickness ofEmitting Pipe)	-	0	-
8.3.2(Inside Diameter ofEmitting Pipe)	-	0	-
8.3.3(Flow Paths in Emitting Unit)	-	0	-
8.3.4(Spacing of Emitter Units)	-	0	-
8.4(Resistance of Emitting Pipes to Hydrostatic Pressure)	-	5000	-
8.5(Resistance to Tension at Elevated Temperature)	-	5000	-
8.6(Resistance to Pull Out ofJoints Between Fitting and Emitting)	-	2000	-
8.7.1(Acceptance Test)	-	4000	-
8.7.2(Type Test)	-	4000	-
8.8(Determination of Emitting Unit Exponen)	-	3500	-
9.1(Non-regulated Emitting Pipe)	-	0	-
9.2(Regulated Emitting Pipe)	-	0	-
10.1(Marking)	-	0	-

24 Sep, 2027

-
Upto and included 500 mm Nominal Dia.

10397

CTL TESTING LABORATORY PRIVATE LIMITED, JAIPUR

8180306

IS 13487 (1992)

Irrigation equipment - Emitters - Specification

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1(Construction and workmanship)	-	500	-
7.2(Flow path in emitters)	-	1000	-
7.3.1(Resistance to Hydrostatic pressure)	-	1000	-
7.3.2(Resistance to Hydrostatic pressure)	-	1000	-
7.3.3(Resistance to Hydrostatic pressure)	-	1000	-
7.4.1(Emitter Pull Out In-line emitters)	-	1000	-
7.4.2(Emitter Pull Out On-line emitters)	-	1500	-
8.1.2(Uniformity of Emission Rate Unregulated emitters)	-	1500	-
8.1.2(Uniformity of Emission Rate Unregulated emitters)	-	1500	-
8.1.3(Uniformity of Emission Rate Regulated emitters)	-	1500	-
8.1.3(Uniformity of Emission Rate Regulated emitters)	-	1000	-
8.2.2(Emission rate as a function of inlet pressure Unregulated emitters)	-	1000	-
8.2.3(Emission rate as a function of inlet pressure Regulated emitters)	-	1000	-
8.3(Determination of Emitter Exponent)	-	1500	-
4(Classification)	-	0	-
5.1(Connections)	-	0	-
5.2(Emitter Ends)	-	0	-
5.3(Materials)	-	1500	-
6.1(Test Specimens)	-	0	-
6.2(Test Conditions)	-	0	-
6.3(Accuracy or Measuring Devices)	-	0	-
7.1(Construction and Workmanship)	-	0	-
7.2(Flow Paths In Emitter)	-	0	-
7.3(Resistance to Hydrostatic Pressure)	-	0	-
7.4(Emitter Pull-out)	-	0	-
7.4.1(In-Line Emitters)	-	0	-
7.4.2(On-Line Emitters)	-	0	-
8.1(Uniformity of Emission Rate)	-	0	-
8.1.1(Number of Test Samples)	-	0	-
8.1.2(Unregulated Emitters)	-	0	-
8.1.3(Regulated Emitters)	-	0	-
8.2(Emission Rate as a Function of Inlet Pressure)	-	0	-
8.2.1(Selection of Telt Sample)	-	0	-
8.2.2(Unregulated Emttters)	-	0	-
8.2.3(Regulated Emitters)	-	0	-
8.3(Determiaatlon of Emitter Exponent)	-	0	-
9(Marking)	-	0	-

24 Sep, 2027

-
Upto and included 500 mm Nominal Dia.

10398

CTL TESTING LABORATORY PRIVATE LIMITED, JAIPUR

8180306

IS 12786 (2024)

Irrigation equipment - Polyethylene pipes for irrigation laterals - Specification (first revision)

14900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(Material)	-	2500	-
Cl-4.2(Carbon content of finished PE lateral pipe)	-	1000	-
Cl-5.1(Dimensions of pipes and wall thicknesses)	-	300	-
Cl-6.0(Visual Appearance)	-	200	-
Cl-7.1(Hydraulic Characteristics- Internal pressure creep rupture test)	-	2000	-
Cl-7.1(Hydraulic Characteristics- quality acceptance test)	-	2000	-
Cl-7.2(Reversion Test)	-	1000	-
Cl-7.3(Tensile Test)	-	750	-
Cl-7.3.1(Test Piece)	-	200	-
Cl-7.3.2(Procedure)	-	0	-
Cl-7.4(Susceptibility to Environmental Stress Cracking)	-	2500	-
Cl-8.0(Supply of pipes)	-	0	-
Cl-9.0(Coiling)	-	200	-
Cl-10.0(Sampling and criteria for conformity)	-	200	-
Cl-11(Marking)	-	200	-
3(Class of Pipe)	-	200	-
5.1 & Table 1(Dimensions of Pipes - Outside diameters)	-	300	-
5.1 & Table 1(Dimensions of Pipes - Wall thickness)	-	300	-
6(Visual Appearance)	-	200	-
7.1 & Table 2(Hydraulic Characteristics)	-	2500	-
7.1 & Table 2(Hydraulic Characteristics)	-	2000	-
7.2(Reversion Test)	-	1000	-
7.3(Tensile Strength)	-	750	-
7.3(Elongation at Break)	-	750	-
7.4(SusceptibiIity to Environmental Stress Cracking)	-	2500	-
4.2(a)(Carbon Black Content-IS 2530)	-	1000	-
4.2(b)(Carbon Black Dispersion-IS 2530)	-	1000	-

24 Sep, 2027

-
Upto and included 500 mm Nominal Dia.

10399

Cotecna Inspection India Private Limited, Gurugram

8166106

IS 10702 (2023)

Hawai Chappal-Specification

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2(Length)	-	300	-
4.3(Thickness)	-	300	-
4.4 , Table No. 1 , i)(Density)	-	300	-
4.4 , Table No. 1 , ii)(2Compression set at constant stress)	-	800	-
4.4 , Table No. 1 , iii)(3Split tear strength)	-	800	-
4.4 , Table No. 1 , iv)("Shrinkage at 50 ºC ± 1 ºC for 24 h for polymeric material, Shrinkage at 100 ºC ± 1 ºC for 1 h for rubber")	-	800	-
4.4 , Table No. 1 , v)(5Abrasion resistance at applied force)	-	1080	-
4.4 , Table No. 1 , vi)(Flexing resistance: Maximum cut growth at 50 000 flexes)	-	1080	-
4.4 , Table No. 1 , vii)(7 Hydrolysis resistance, Maximum cut growth at 50 000 flexes)	-	2700	-
4.4 , Table No . 2 , i)(Density , Solid strap, Cellular strap)	-	300	-
4.4 , Table No . 2 , ii)("Breaking strength , Strap to strap and Toe portion to strap , Elongation at break")	-	500	-
4.4 , Table No . 2 , iii)(Minimum cross section of the stud)	-	800	-
4.4 , Table No . 2 , iv)(Stud bolt)	-	800	-
4.4 , Table No . 3 , i)(Toe post attachment strength)	-	800	-
4.4 , Table No . 3 , ii)(Attachment strength of rear strap)	-	800	-
4.4 , Table No . 3 , iii)(Inter layer bond strength)	-	1080	-
Cl. No.5.1,Table no.1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	4460	-
Cl. No.5.1,Table no.1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	2610	-
Cl. No.5.1,Table no.1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	2610	-
Cl. No.5.1,Table no.1 of IS 17011(iv)(Chromium (VI))	-	1490	-
Cl. No.5.1,Table no.1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	4950	-
Cl. No.5.1,Table no.1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	4300	-
Cl. No.5.1,Table no.1 of IS 17011(vii)(Formaldehyde)	-	4300	-
Cl. No.5.1,Table no.1 of IS 17011(viii)(Organotin compounds)	-	6930	-
Cl. No.5.1,Table no.1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	3470	-
Cl. No.5.1,Table no.1 of IS 17011(x)(pH)	-	300	-
Cl. No.5.1,Table no.1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	3960	-
Cl. No.5.1,Table no.1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	3470	-
Cl.No. 5.2(lead content)	-	900	-
Cl-4.4, Table -1 S. No-1 (i) (Amendment No-1)(Compression set at constant stress)	-	800	-
Cl-4.4, Table -1 S. No-1 (ii) (Amendment No-1)(Split tear strength)	-	800	-
Cl-4.4, Table -1 S. No-1 (iii) (a)(Amendment No-1)("Shrinkage at Shrinkage at 50 °C ± 1 °C for 2 h for polymeric material, percent, Max ")	-	800	-
Cl-4.4, Table -1 S. No-1 (iii)(b) (Amendment No-1)(Shrinkage at 100 °C ± 1 °C for 1 h for rubber, percent, Max)	-	800	-
Cl-4.4, Table -1 S. No-1 (iv) (Amendment No-1)(Abrasion resistance at applied force)	-	1080	-
Cl-4.4, Table -1 S. No-1 (v) (Amendment No-1)(Flexing resistance: Maximum cut growth,)	-	1080	-
Cl-4.4, Table -1 S. No-1 (vi) (Amendment No-1)(Hydrolysis resistance:Maximum cut growth)	-	2700	-
Cl-4.4, Table -1 S. No-1 (vii) (Amendment No-1)(Chemical requirements)	-	15840	-
Cl-4.4, Table -2 S. No-1 (i), a (Amendment No-1)("Breaking strength for Strap to strap 1-Solid strap 2-Cellular strap")	-	500	-
Cl-4.4, Table -1 S. No-1 (viii) (Amendment No-1)("Lead content (as Pb), ppm, Max")	-	900	-
Cl-4.4, Table -2 S. No-1 (i), b (Amendment No-1)("Breaking strength for Toe portion to strap 1-Solid strap 2-Cellular strap")	-	500	-
Cl-4.4, Table -2 S. No-1 (i), c (Amendment No-1)("Elongation at break , percent, Min 1-Solid strap 2-Cellular strap")	-	500	-
Cl-4.4, Table -2 S. No-1 (ii), (Amendment No-1)(Chemical requirements)	-	15840	-
Cl-4.4, Table -2 S. No-1 (iii), (Amendment No-1)(Lead content (as Pb), in ppm, Max)	-	900	-
Cl-4.4, Table -3 S. No-1 (i), (Amendment No-1)(Toe post attachment strength)	-	800	-
Cl-4.4, Table -3 S. No-1 (ii), (Amendment No-1)(Attachment strength of rear strap)	-	800	-
Cl-4.4, Table -3 S. No-1 (iii), (Amendment No-1)(Inter layer bond strength)	-	800	-

28 Oct, 2029

-
Included w.e.f. 20-12-2023. Exclusion: Cl.4.4 Table 1 (vii) (Hydrolysis resistance maximum cut growth at 50000 flexes), Cl.4.4 Table 1 (vi) flexing resistance Amendment No.1 included w.e.f. 27.06.2024

10400

CTL TESTING LABORATORY PRIVATE LIMITED, JAIPUR

8180306

IS 14885 (2022)

Polyethylene Pipes for the Supply of Gaseous Fuels ï¿½ Specification (First Revision)

460000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2(Grade of material)	-	500	-
4.3(Nominal Diameter)	-	500	-
4.4(Colour)	-	300	-
5.1(Polyethylene compound)	-	4425	a) Density (conventional) Rs.500.00 Rs.625.00 (Specimen) (b) MFI Rs.1,100.00 Rs.0.00 (c) Thermal Stability to oxidation(OIT) Rs.2,200.00 Rs.0.00
5.3(Anti-oxidant)	-	1500	-
5.4(U-V stabilizer)	-	0	-
5.7(PE Compound Quality Evaluation)	-	400000	-
5.5(Effect of Gas condensate on the Hydrostatic strength)	-	5000	-
5.6(Resistance to Weathering)	-	36000	-
6.1(Mean out side Diameter (For less than or equal to 25 mm- Average of 8 , For higher diameters average of 6))	-	500	-
6.1(Out of Roundness (Ovality))	-	300	-
6.2(Wall thickness (Take 8 reading and Average will be repoted))	-	500	-
7(Finish)	-	300	-
8.1(Internal pressure creep rupture test for plain at 80 deg. C for 165h)	-	4200	-
8.1(Internal pressure creep rupture test for plain pipes at 20 deg. C for 100h)	-	4800	-
8.1(Internal pressure creep rupture test for plain pipes at 80 deg. C for 1000 h)	-	11000	-
8.2(Reversion Test)	-	700	-
8.3(Density)	-	500	-
8.6(Thermal Stability (Oxidation Induction Time))	-	2200	-
8.7(Volatile Matter Content)	-	700	-
8.8(Tensile Properties (Tensile Yield Strength and Elongation at Break))	-	1250	-
8.9(Resistance to Weathering)	-	36000	-
6.4(Length of Pipe)	-	300	-
8.4(Melt Flow Rate (MFR))	-	1100	-
8.5(Pigment Dispersion)	-	600	-
8.10(Slow Crack Growth Rate Test)	-	10800	-
8.11(Squeeze-off)	-	1300	-
5.1, 5.7 Table 2(i) Conventional density (of base polymer))	-	500	-
5.1, 5.7 Table 2(ii) Melt flow rate (MFR))	-	1100	-
5.1, 5.7 Table 2(iii) Thermal stability (oxidation induction time))	-	2200	-
5.1, 5.7 Table 2(iv) Volatile content)	-	700	-
5.1, 5.7 Table 2(v) Water content1))	-	700	-
5.1, 5.7 Table 2(vi) Pigment dispersion)	-	500	-
5.1, 5.7 Table 3(iv) Resistance to slow crack growth rate)	-	5500	-
5.3(Anti-Oxidant)	-	0	-
5.4(U.V. Stabilizer)	-	0	-
5.5(Effects of Gas Condensate on the Hydrostatic Strength)	-	5000	-
5.6(ii) Hydraulic characteristics)	-	36000	-
5.6(iii) Thermal stability (Oxidation induction time))	-	36000	-
6(Dimensions of pipes)	-	500	-
7(Finish)	-	0	-
8.1(Hydraulic Characteristics)	-	20000	-
8.2(Reversion test)	-	700	-
8.3(Density)	-	1000	-
8.4(Melt Flow Rate)	-	1100	-
8.5(Pigment Dispersion)	-	700	-
8.6(Thermal Stability (Oxidation Induction Time))	-	2500	-
8.7(Volatile Matter Content)	-	1500	-
8.9(Resistance to Weathering)	-	36000	-
8.8(Tensile Properties (Tensile Yield Strength and Elongation at Break))	-	4500	-
8.10(Slow Crack Growth Rate Test)	-	5500	-
8.11(Squeeze-of)	-	6350	-
10(Marking)	-	300	-

24 Sep, 2027

-
Upto and included 500 mm Nominal Dia.

10401

ALAIPURIA TEST HOUSE PRIVATE LIMITED, GHAZIABAD

8180426

IS 398 : Part 2 (1996)

Aluminium conductors for overhead transmission purposes - Specification: Part 2 aluminium conuuctors, galvanized steel - Reinforced (Third Revision)

10500 View breakup
Rs. 10500/- up to & including 100 sqmm

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1.1 & 13.2 Table-1 (mech)(Diameter of Aluminium Wires Before Stranding)	-	350	-
8.1.1 & 13.2 Table 2 (mech)(Diameter of Steel Wires Before Stranding)	-	350	-
8.1.1 & 13.2 Table-1 (mech)(Diameter of Aluminium Wires After Stranding)	-	350	-
8.1.1 & 13.2 Table 2 (mech)(Diameter of Steel Wires After Stranding)	-	350	-
10 (elec)(Stranding)	-	0	-
10 (elec)(Stranding)	-	0	-
10 (elec)(Stranding)	-	0	-
10 (mech)(Stranding)	-	0	-
13.3 Table 1 (mech)(Breaking Load of Aluminium Wires Before Stranding)	-	500	-
13.3 Table 2 (mech)(Breaking Load of Steel Wires Before Stranding)	-	500	-
13.3 Table 1 (mech)(Breaking Load of Aluminium Wires After Stranding)	-	500	-
13.3 Table 2 (mech)(Breaking Load of Steel Wires After Stranding)	-	500	-
13.4.1 (mech)(Ductility by Torsion Test before stranding)	-	500	-
13.4.1 (mech)(Ductility by Torsion Test before stranding)	-	500	-
13.4.1 (mech)(Ductility by Torsion Test after stranding)	-	500	-
13.4.1 (mech)(Ductility by Torsion Test after stranding)	-	500	-
13.4.2 (elec)(Ductility by Elongation Test before stranding)	-	500	-
13.4.2 (elec)(Ductility by Elongation Test after stranding)	-	500	-
13.5.1 (mech)(Wrapping Test Aluminium Wires Before Stranding)	-	250	-
13.5.1 (mech)(Wrapping Test Aluminium Wires After Stranding)	-	250	-
13.5.2 (mech)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	250	-
13.5.2 (mech)(Wrapping Test Galvanized Steel Wires After Stranding)	-	250	-
13.6 (elec)(Resistance test-Aluminium wire before Stranding)	-	750	-
13.6 (elec)(Resistance test-Aluminium wire after stranding)	-	750	-
13.7.2 (chem)(Mass of Zinc coating)	-	750	-
13.7.2 (chem)(Uniformity of Zinc coating)	-	750	-
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Outermost Layer)	-	250	-
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	250	-
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	250	-
13.8 Table-4 (mech)(Lay Ratio- Steel Core (6 Wire Layer))	-	250	-
13.9 (elec)(Surface condition test)	-	0	-
13.10 (elec)(Ultimate breaking load)	-	0	-
13.11 (elec)(Stress-strain test)	-	0	-
13.8 Table-4 (elec)(Lay Ratio- Steel Core (6 Wire Layer))	-	250	-
13.8 Table-4 (elec)(Lay Ratio- Steel Core (6 Wire Layer))	-	250	-
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	250	-
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	250	-
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Outermost Layer)	-	250	-
13.7.2 (elec)(Uniformity of Zinc coating)	-	750	-
13.7.2 (elec)(Mass of Zinc coating)	-	750	-
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires After Stranding)	-	250	-
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	250	-
13.5.1 (elec)(Wrapping Test Aluminium Wires After Stranding)	-	250	-
13.5.1 (elec)(Wrapping Test Aluminium Wires Before Stranding)	-	250	-
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	500	-
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	500	-
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	500	-
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	500	-
13.3 Table 2 (elec)(Breaking Load of Steel Wires After Stranding)	-	500	-
13.3 Table 1 (elec)(Breaking Load of Steel Wires After Stranding)	-	500	-
13.3 Table 2 (elec)(Breaking Load of Steel Wires Before Stranding)	-	500	-
13.3 Table 1 (elec)(Breaking Load of Steel Wires Before Stranding)	-	500	-
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires Before Stranding)	-	350	-
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires Before Stranding)	-	350	-
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires After Stranding)	-	350	-
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires After Stranding)	-	350	-
13.8 Table-4 (elec)(Lay Ratio- Steel Core (6 Wire Layer))	-	250	-
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	250	-
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	250	-
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Outermost Layer)	-	250	-
13.7.2 (elec)(Uniformity of Zinc coating)	-	750	-
13.7.2 (elec)(Mass of Zinc coating)	-	750	-
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires After Stranding)	-	250	-
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	250	-
13.5.1 (elec)(Wrapping Test Aluminium Wires After Stranding)	-	250	-
13.5.1 (elec)(Wrapping Test Aluminium Wires Before Stranding)	-	250	-
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	500	-
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	500	-
13.4.1 (elec)(Ductility by Torsion Test before stranding)	-	500	-
13.4.1 (elec)(Ductility by Torsion Test before stranding)	-	500	-
13.3 Table 2 (elec)(Breaking Load of Steel Wires After Stranding)	-	500	-
13.3 Table 1 (elec)(Breaking Load of Aluminium Wires After Stranding)	-	500	-
13.3 Table 2 (elec)(Breaking Load of Steel Wires Before Stranding)	-	500	-
13.3 Table 1 (elec)(Breaking Load of Aluminium Wires Before Stranding)	-	500	-
10 (elec)(Stranding)	-	0	-
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires After Stranding)	-	350	-
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires After Stranding)	-	350	-
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires Before Stranding)	-	350	-
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires Before Stranding)	-	350	-
4.1(Resistivity)	-	0	-
4.2(Density)	-	0	-
4.3(Constant-Mass Temperature Coefficient of Resistance)	-	0	-
4.4(Coefficient of Linear Expansion)	-	0	-
5.1(Density)	-	0	-
5.2(Coefficient of Linear Expansion)	-	0	-
14.2(a), 8.2.1(Sizes)	-	0	-
7(FREEDOM FROM DEFECTS)	-	0	-
6.2(zinc Purity)	-	0	-
9(Joint in wires)	-	0	-
6.1.1(Aluminum wires shall conform to IS 5484)	-	0	-
6.1.2(The mechanical properties of wire shall comply with the requirements given in Table 2)	-	0	-
6.2(It shall conform to and satisfy all the requirements of IS 209)	-	0	-
8.2.2(Calculated resistance)	-	0	-
Cl-9.2.5(Welded joint strength)	-	0	-

03 Oct, 2027

-
Exclusion: Stress Strain, Ultimate Breaking Load, Surface Condition Test

10402

CTL TESTING LABORATORY PRIVATE LIMITED, JAIPUR

8180306

IS 15778 (2007)

Chlorinated polyvinyl chloride (Cpvc) pipes for potable hot and cold water distribution supplies - Specification

95950 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5 Table 1(Classification of pipes)	-	0	-
6.2.1 Annex B(Chloride Content of Resin)	-	5000	-
6.3(Compound Properties)	-	25000	-
6.3.1 Annex B(Chloride content)	-	5000	10% DISCOUNT FOR BIS
6.3.2 Annex C(Verification of the Malfunction Temperature, Tmal: )	-	15000	-
6.3.2 IS 13360 (Part 3/See 1)(Density)	-	500	-
7.1 IS 12235 (Part 1) Table 2(Dimension of Pipes: Mean outside Diameter)	-	200	-
7.1,7.1.1 IS 12235 (Part 1) Table 2(Outside Diameter at any point)	-	200	-
7.1.2 IS 12235 (Part 1) Table 2(Wall Thickness )	-	200	-
7.1.3 (Effective length)	-	250	-
8(Pipe Ends)	-	250	-
9(PHYSICAL AND CHEMICAL CHARACTERISTICS)	-	200	-
9.1(Visual Appearance)	-	200	-
9.1(Visual Appearance)	-	200	-
9.2 IS 12235 (Part 3)(Opacity)	-	1000	-
Cl. 9.3,IS 4985 Cl. 10.3(Lead (first extraction))	-	1000	-
Cl. 9.3,IS 4985 Cl. 10.3(Lead (third extraction))	-	1000	-
Cl. 9.3,IS 4985 Cl. 10.3(Dialkyl tin C4 and higher homologues measured as tin (third extraction))	-	800	-
Cl. 9.3,IS 4985 Cl. 10.3(Cadmium (for all three extracts) )	-	1000	-
Cl. 9.3,IS 4985 Cl. 10.3(Mercury (for all three extracts) )	-	1000	-
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances such as 'di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate' (third extraction) )	-	1000	-
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances including di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate')	-	800	-
9.4 IS 12235(Part 5/Sec 1 and Sec 2)(Reversion Test : When tested by the method prescribed in IS 12235(Part 5/Sec 1 and Sec 2), a length of pipe 200 + 20 mm long shall not alter in length by more than 5 percent.)	-	1000	-
9.5 IS 12235(Part 2)(Vicat Softening Temperature: When tested by the method prescribed in IS 12235(Part 2), the Vicat softening temperature of the specimen shall not be less than 110°C.)	-	1500	-
9.6 IS 12235(Part 14)(Density)	-	500	-
10(Mechanical Properties)	-	65000	-
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	5000	-
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	10000	-
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	15000	-
10.2 Table 3 IS 12235 (Part 8/Sec 1)(Thermal Stability by Hydrostatic Pressure Testing)	-	35000	-
10.3 IS 4985 Table 4(Resistance to External Blow at O°C: When tested by the method prescribed in IS 4985, with classified striker mass and drop height as given in Table 4, the pipe shall have a true impact rate of not more than 10 percent.)	-	3000	-
10.4 IS 12235(Part 19)(Flattening Test)	-	1000	-
10.5 IS 12235(Part 13)(Tensile Strength : When tested by the method prescribed in IS 12235(Part 13), the tensile strength at yield shall not be less than 50 MPaat 27±2°C. )	-	1500	-
5 Table 1(Classification of pipes)	-	0	-
6.2.1 Annex B(Chloride Content of Resin)	-	0	-
6.3(Compound Properties)	-	0	-
6.3.1 Annex B(Chloride content)	-	0	-
6.3.2 Annex C(Verification of the Malfunction Temperature, Tmal: )	-	15000	-
6.3.2 IS 13360 (Part 3/See 1)(Density)	-	0	-
7.1 IS 12235 (Part 1) Table 2(Dimension of Pipes: Mean outside Diameter)	-	0	-
7.1,7.1.1 IS 12235 (Part 1)Table 2(Outside Diameter at any point (Minimum))	-	0	-
7.1.2 IS 12235 (Part 1)Table 2(Wall Thickness (Minimum))	-	0	-
7.1.3 (Effective length)	-	0	-
8.0(Pipe Ends)	-	0	-
9.0(PHYSICAL AND 1CHARACTERISTICS)	-	0	-
9.1(Visual Appearance)	-	0	-
9.1(Visual Appearance)	-	0	-
9.2 IS 12235 (Part 3)(Opacity)	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Lead (first extraction))	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Lead (third extraction))	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Dialkyl tin C4 and higher homologues measured as tin (third extraction))	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Cadmium (for all three extracts) )	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Mercury (for all three extracts) )	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances such as 'di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate' (third extraction) )	-	0	-
Cl. 9.3,IS 4985 Cl. 10.3(Other toxic substances including di-n-octyl-tin- s-s bis iso-octyl mercapto acetate' and 'butyl stearate')	-	0	-
9.4 IS 12235(Part 5/Sec 1 and Sec 2)(Reversion Test : When tested by the method prescribed in IS 12235(Part 5/Sec 1 and Sec 2), a length of pipe 200 + 20 mm long shall not alter in length by more than 5 percent.)	-	0	-
9.5 IS 12235(Part 2)(Vicat Softening Temperature: When tested by the method prescribed in IS 12235(Part 2), the Vicat softening temperature of the specimen shall not be less than 110°C.)	-	0	-
9.6 IS 12235(Part 14)(Density)	-	0	-
10.0(Mechanical Properties)	-	0	-
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	0	-
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	0	-
10.1 Table 3 IS 12235 (Part 8/Sec 1)(Hydrostatic Characteristics)	-	0	-
10.2 Table 3 IS 12235 (Part 8/Sec 1)(Thermal Stability by Hydrostatic Pressure Testing)	-	0	-
10.3 IS 4985 Table 4(Resistance to External Blow at O°C: When tested by the method prescribed in IS 4985, with classified striker mass and drop height as given in Table 4, the pipe shall have a true impact rate of not more than 10 percent.)	-	0	-
10.4 IS 12235(Part 19)(Flattening Test)	-	0	-
10.5 IS 12235(Part 13)(Tensile Strength : When tested by the method prescribed in IS 12235(Part 13), the tensile strength at yield shall not be less than 50 MPaat 27±2°C. )	-	0	-
7.1.2(Wall Thickness (Maximum))	-	0	-
7.1.1(Outside Diameter at any point (Maximum))	-	0	-
6.3(K value Test)	-	2500	-
6.3.3(Density)	-	500	-

24 Sep, 2027

-
Upto and included 500 mm Nominal Dia.

10403

CTL TESTING LABORATORY PRIVATE LIMITED, JAIPUR

8180306

IS 17425 (2020)

Irrigation Equipment - Quick Coupled Polyethylene Pipes and Fittings for Sprinkler Irrigation Systems - Specification

44500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Dimensions of pipe - i) Outside diameter)	-	300	-
5(Dimensions of pipe - ii) Wall thickness minimum)	-	300	-
6(Visual Appearance)	-	300	-
7.1(Hydraulic Characteristics - Quality test)	-	7000	-
7.1(Hydraulic Characteristics - Acceptance test)	-	2000	-
7.2(Reversion Test)	-	1500	-
7.3(Tensile Test- i) Tensile Strength)	-	1000	-
7.3(Tensile Test - ii)Elongation at Break)	-	1000	-
7.4(Fusion Compatibility Test- a) Quality test)	-	4500	-
7.4(Fusion Compatibility Test- b) Acceptance test)	-	2000	-
7.5(Density)	-	750	-
7.6(Melt Flow Rate)	-	1500	-
7.6(Melt Flow Rate)	-	0	-
4.2(Carbon black- a)carbon content)	-	1000	-
4.2(Carbon black- b) Dispersion of carbon black)	-	1000	-
7.6(Melt now Rate (MFR))	-	1500	-
7.5(Density)	-	750	-
7.4 Table-2(Fusion Compatibility Test)	-	0	-
7.3(Tensile Test)	-	1000	-
7.2(Reversion Test)	-	0	-
7.1 Table -2(Hydraulic Characteristics)	-	2500	-
6.1(VISUAL APPEARANCE)	-	500	-
5.1.2(Ovality)	-	300	-
5.1 table -1(DIMENSIONS OF PIPES)	-	300	-
4.3(Anti-oxidant)	-	4500	-
Cl. 4.2 , IS 2530-1963, Cl. 10(Cabon Black Content)	-	1000	-
4.1.2(The MFR of the material shall be between 0.2 to 1.1 (both inclusive) when tested at 190 T at a nominal load of 50 N by the method prescribed in 7 of IS 2530. The MFR of the material shall also be within 20% of the value declared by the manufacturer.’)	-	1500	-
4.1.1(density shall be between 940.4 kg/m’ and 958.4 kg/m3 (both inclusive) when determined at 27°C according to procedure prescribed in Annex A of IS 7328. The value of the density shall also not differ from the nominal value by more than 3 kg/m2 as per 5.2.1.1 of IS 7328.)	-	750	-
4.1(melt flow rating (MFR) shall not exceed 1.10 g/10 min.)	-	1500	-
3(CLASSIFICATION OF PIPES)	-	1500	-
4.1(Quick Coupled Male and Female Couplers)	-	1000	-
4.1(Quick Coupled Male and Female Couplers)	-	1000	-
4.1.3(Workmanship and appearance)	-	500	-
4.1.4(Holding attachments for coupler parts)	-	500	-
6.1.3(Weldability Test- a) Quality test)	-	1500	-
6.1.3(Weldability Test- b) Acceptance test)	-	1500	-
3(Quick Coupled pipes)	-	1000	-
3(QUICK COUPLED PIPES)	-	500	-
4(QUICK COUPLED FITTINGS)	-	1000	-
4.1 (a)(Quick Coupled Male and Female Couplers)	-	1000	-
4.1 (b)(HDPE couplers —)	-	0	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Aluminium Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Copper Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Magnesium Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Silicon Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Iron Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Manganese Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Zinc Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Titanium Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Chromium Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Remarks)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Aluminium Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Copper Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Magnesium Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Silicon Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Iron Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Manganese Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Zinc Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Titanium Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Chromium Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Remarks)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Aluminium Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Copper Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Magnesium Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Silicon Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Iron Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Manganese Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Zinc Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Titanium Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Chromium Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Remarks)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Aluminium Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Copper Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Magnesium Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Silicon Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Iron Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Manganese Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Zinc Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Titanium Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Chromium Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Remarks)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Aluminium Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Copper Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Magnesium Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Silicon Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Iron Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Manganese Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Zinc Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Titanium Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Chromium Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Cr + Mn)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Aluminium Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Copper Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Magnesium Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Silicon Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Iron Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Manganese Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Zinc Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Titanium Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Chromium Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Cr + Mn)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Aluminium Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Copper Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Magnesium Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Silicon Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Iron Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Manganese Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Zinc Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Titanium Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Chromium Content)	-	300	-
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Cr + Mn)	-	300	-
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Copper Content)	-	300	-
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Silicon Content)	-	300	-
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Magnesium Content)	-	300	-
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Iron Content)	-	300	-
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Manganese Content)	-	300	-
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Nickel Content)	-	300	-
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Zinc Content)	-	300	-
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Lead Content)	-	300	-
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Tin Content)	-	300	-
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Titanium Content)	-	300	-
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Aluminium Content)	-	300	-
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1)(Carbon Content)	-	300	-
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1)(Manganese Content)	-	300	-
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1)(Sulphur Content)	-	300	-
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1)(Phosphorous Content)	-	300	-
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1) Al-Killed(Aluminium Content)	-	300	-
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1) Si-Killed(Silicon Content)	-	0	-
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1) Al-Si-Killed(Silicon Content)	-	300	-
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1) Al-Si-Killed(Aluminium Content)	-	300	-
Cl. 4.1.1.2.1, IS 14151 (P-1)-1999, Cl. 4, IS 2530-1963, Cl. 10(Cabon Black Content)	-	300	-
Cl. 4.1.1.2.1, IS 14151 (P-1)-1999, Cl. 4, IS 2530-1963, Cl. 16(Carbon Black Dispersion)	-	300	-
4.1 .1.2.1(HDPE couplers)	-	1000	-
4.1 .1.2.2(HDPE couplers)	-	1000	-
4.1.4(a)(Holding Attachments for Coupler Parts)	-	1000	-
4.1.4(b)(Holding Attachments for Coupler Parts)	-	1500	-
4.2.1(Quick Coupled ~pe HDPE Fittings)	-	0	-
4.2.2(Quick Coupled ~pe HDPE Fittings)	-	0	-
4.2.3(Quick Coupled ~pe HDPE Fittings)	-	0	-
4.2.4(Quick Coupled ~pe HDPE Fittings)	-	0	-
4.2.5(Quick Coupled ~pe HDPE Fittings)	-	0	-
4.2.6(Quick Coupled ~pe HDPE Fittings)	-	0	-
4.2.7(Quick Coupled ~pe HDPE Fittings)	-	0	-
4.2.7(1 Dimensions of Quick Coupled Pipes and Fittings)	-	500	-
4.2.7(Reducers Table 1 and 2 of IS 8008 (Part 4))	-	0	-
4.2.7(Ferrule reducers Table 1 of IS 8008 (Part 5))	-	0	-
4.2.7(Pipe ends Table 1 of IS 8008 (Part 6))	-	0	-
4.2.7(End caps Table 1 of IS 8008 (Part 9))	-	0	-
4.2.7(Insert vatve couplers Table 1 of IS 8008 (Part 3))	-	500	-
4.2.7(Valve openers Table 1 of IS 8008 (Part 2))	-	500	-
5.2(Dimensions of Quick Coupled Sprinkler Saddles Table 1.)	-	500	-
6.1(Quick Coupled Pipes and Fittings)	-	500	-
6.1.1, 6.1.1.1(Leakage Test)	-	1500	-
6.1.1, 6.1.1.1(Leakage Test)	-	1500	-
6.1.2, 6.1.2.1(Hydraulic Proof Test)	-	1500	-
6.1.2.2(Hydraulic Proof Test)	-	1500	-
6.1.2.2(Hydraulic Proof Test)	-	1500	-
6.1.3, 6.1.3.1(Weldability Test)	-	1500	-
6.1.3.1.1(Weldability Test)	-	1500	-
6.1.3.2(Quick coupled fittings)	-	0	-
6.2, 6.2.1(Quick Coupled Fittings)	-	0	-
7.2.1(Visual and Workmanship Requirement)	-	0	-
6.2 b(Material Identification - Male & Female Coupler)	-	0	-
6.3.3(Material Identification - Insert Valve Coupler)	-	0	-
6.3.3(Material Identification - Insert Valve Coupler)	-	0	-
6.3.4()	-	0	-
6.3.5(Material Identification - Saddle)	-	0	-
6.3.5(Material Identification - Pipe Ends)	-	0	-
6.3.6(Quick Coupled Pump Connectors - Visual)	-	0	-
4.2(Metallic Couplers)	-	0	-
4.2(Metallic Couplers)	-	0	-
7.2.1(Leakage Test)	-	1500	-
Cl.4.1.3(Den sity Test)	-	750	-
Cl.4.1.3(MFR Test)	-	1500	-
Cl.4.1.3(MFR Test)	-	1500	-
Cl.4.1.3(MFR Test)	-	1500	-
Cl.4.1.3(MFR Test)	-	1500	-
Cl.4.1.3(Thermal Stabi lity)	-	2500	-
Cl.4.1.3(Thermal Stabi lity)	-	2500	-
Cl.4.1.3, T-1(Volatile Matter)	-	1500	-
Cl.4.1.3, T-1(Volatile Matter)	-	1500	-
Cl.4.1.3, T-1(Volatile Matter)	-	1500	-
Cl.4.1.3, T-1(Volatile Matter)	-	1500	-
Cl.4.1.3, T-1(Volatile Matter)	-	1500	-
Cl.4.1.3, T-1(Volatile Matter)	-	1500	-
Cl.4.1.3, T-1(Volatile Matter)	-	1500	-
Cl.4.1.3, T-1(Water Content)	-	1500	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.3, T-1(Water Content)	-	1000	-
Cl.4.1.4(Carbon Black Content)	-	1000	-
Cl.4.1.4(Carbon Black Content)	-	1000	-
Cl.4.1.4(Carbon Black Content)	-	1000	-
Cl.4.1.4(Carbon Black Di spersion)	-	1000	-
Cl.4.1.4(Carbon Black Di spersion)	-	1000	-
Cl.4.1.4(Carbon Black Di spersion)	-	1000	-
Cl.5(Di men sion)	-	0	-
Cl.5.1.l(Outside Diameter)	-	300	-
Cl.5.1.l(Outside Diameter)	-	300	-
Cl.6.2.L(Wall Thickness)	-	300	-
Cl.6.2.4(Workmanship and Appearance)	-	300	-
Cl.6.2.6(Rubber Ring Hardness)	-	750	-
Cl.6.2.6(Ageing Test)	-	1000	-
Cl.7.1.l(Visual Anneara nce)	-	0	-
Cl.7.1.2(Hydraulic Characteristic)	-	0	-
Cl.7.1.2(Hydraulic Characteristic)	-	0	-
Cl.7.1.2(Hydraulic Characteristic)	-	0	-
Cl.7.1.2(Hydraulic Characteristic)	-	0	-
Cl.7.1.3(Reversion Test)	-	1000	-
Cl.7.1.3(Reversion Test)	-	1000	-
Cl.7.1.4(Tensile Test)	-	1500	-
Cl.7.1.4(Tensile Test)	-	1500	-
Cl.7.1.4(Tensile Test)	-	1500	-
Cl.7.1.4(Elongation)	-	1500	-
Cl.7.1.4(Elongation)	-	1500	-
Cl.7.1.5(Fusion Compatibility)	-	2000	-
Cl.7.1.5(Fusion Compatibility)	-	2000	-
Cl.7.1.5(Fusion Compatibility)	-	2000	-
Cl.7.1.5(Fusion Compatibility)	-	2000	-
Cl.7.1.6(Corrected Density)	-	750	-
Cl.7.1.7(MFR Test)	-	1500	-
Cl.7.1.7(MFR Test)	-	1500	-
Cl.7.1.7(MFR Test)	-	1500	-
Cl.7.1.7(MFR Test)	-	1500	-
Cl.7.2.l(Leakage Test)	-	1500	-
Cl.7.2.l(Leakage Test)	-	1500	-
Cl.7.2.l(Leakage Test)	-	1500	-
Cl.7.2.l(Leakage Test)	-	1500	-
Cl.7.2.l(Leakage Test)	-	1500	-
Cl.7.2.2(Cl.7.2.2)	-	1500	-
Cl.7.2.3(Weld ability Test)	-	1500	-
Cl.7.2.3(Weld ability Test)	-	1500	-
6.2 (iii) Rubber Rings (a) Shore hardness(Shore hardness)	-	1500	-
6.2 (iii) Rubber Rings (b) Accelerated Storage test(Accelerated Storage test)	-	1500	-
5(Dimensions of pipe (outside diameter, ovality, wall thickness))	-	0	-
6.1(Thermal Stability (OIT))	-	0	-
6.1(Volatile Matter)	-	1500	-
6.1(Water content)	-	2500	-
6.1(Tensile strength at Yield & Elongation at break)	-	2500	-
6.1(Carbon Black Content)	-	1000	-
6.1(Carbon Black Dispersion)	-	1000	-
6.2.1(Base Density x 2)	-	750	-
6.2.1(Melt Flow Index x 2)	-	1000	-
6.2.1(Thermal Stability (OIT) x 2)	-	2500	-
6.2.1(Volatile Matter x 2)	-	1000	-
6.2.1(Water content x 2)	-	1500	-
6.2.1(Carbon Black Content x 2)	-	1000	-
6.2.1(Carbon Black Dispersion x 2)	-	1000	-
6.2.1(Wall thickness of male & female coupler)	-	500	-
6.2.4(Workmanship and appearance (Visual))	-	300	-
6.2.5(Holding attachment for coupler parts)	-	2500	-
6.2.5(Material Composition (Chemical Analysis))	-	0	-
4.2.2(Coating thickness (Hot dip Galvanized or Electroplated or Passivated or Powder Coated))	-	500	-
6.2.6(Material Identification (Chemical Analysis))	-	0	-
6.2.6(Color)	-	0	-
6.2.6(Rubber Ring Hardness Shore – A (Before Ageing))	-	1500	-
6.2.6(Ageing Charges for rubber ring)	-	1500	-
7.1.1(Visual appearance of pipes)	-	300	-
7.1.2(Hydraulic Characteristics)	-	0	-
7.1.2((a) Acceptance Test (48 hrs) / 80˚ C)	-	1500	-
7.1.2((b) Type test ( 165 hrs) / 80˚ C)	-	4500	-
7.1.3(Reversion)	-	1000	-
7.1.4(Tensile strength & elongation)	-	1500	-
7.1.5(Fusion Compatibility test)	-	4500	-
7.1.5((a) Acceptance Test (48 hrs) / 80˚ C)	-	1500	-
7.1.5((b) Type test ( 165 hrs) / 80˚ C)	-	4500	-
7.1.6(Corrected Density)	-	1000	-
7.1.6(Base Density)	-	1000	-
7.1.6(Carbon black Content)	-	1000	-
7.1.7(Melt Flow Rate (MFR))	-	1500	-
4.1.1 (Table-1)(Density)	-	1000	-
4.1.1 (Table-1)(Melt Flow Index)	-	1500	-
4.1.1 (Table-1)(Oxidation Induction Time)	-	2500	-
4.1.1 (Table-1)(Volatile Matter)	-	1500	-
4.1.1 (Table-1)(Water content)	-	1500	-
4.1.1 (Table-1)(Tensile strength at Yield & Elongation at break)	-	0	-
4.1.4(Carbon Black Content)	-	1000	-
4.1.4(Carbon Black Dispersion)	-	1000	-
4.1.1(Polyethylene material)	-	0	-
4.1.3, Table 1,(i)(Bass density)	-	750	-
4.1.3, Table 1,(ii)(Melt flow rate)	-	1000	-
4.1.3, Table 1,(iii)(Thermal stability)	-	2500	-
4.1.3, Table 1,(iv)(Volatile matter)	-	1500	-
4.1.3, Table 1,(v)(Water content)	-	1500	-
4.1.3, Table 1,(vi)(Minimum tensile strength at yield)	-	1500	-
4.1.3, Table 1,(vii)(Minimum elongation at break)	-	1000	-
4.1.4(The Carbon Content and Dispersion)	-	1000	-
4.1.5(Carbon Black Specification)	-	1000	-
4.1.6(Antioxidant)	-	2500	-
4.1.7(Rework Material)	-	0	-
4.2(Metallic Couplers)	-	0	-
5.1, Table 1,(i)(Plain pipes)	-	0	-
5.1, Table 1,(ii)(90° Bends and tee)	-	500	-
5.1, Table 1,(iii)(Base pipe )	-	300	-
5.1, Table 1,(iv)(PCN)	-	300	-
5.1, Table 1,(v)(Reducers, ferrule reducers)	-	0	-
5.1, Table 1,(vi)(End caps, insert valve coupler, valve openers)	-	0	-
5.1, Table 1,(vii)(Riser pipe and socket)	-	0	-
7.1.1(Visual Appearance and Workmanship)	-	300	-
7.1.2(Hydraulic Performance Characteristic)	-	4500	-
7.1.3(Reversion Test)	-	1000	-
7.1.4(Tensile Test)	-	1500	-
7.1.5(Fusion Compatibility Test)	-	2500	-
7.1.6(Corrected Density)	-	1000	-
7.1.7(Melt flow rate)	-	1000	-
7.2.1(Leakage Test)	-	1500	-
7.2.2(Hydraulic Proof Test)	-	1500	-
7.2.3(Weldability Test)	-	1500	-
7.3(Quick Couple Fitting)	-	0	-
10(Marking)	-	300	-
5.1.2(Squareness)	-	300	-
7.2.1(Leakage test 1hour / 27°C)	-	1500	-
7.2.2(Hydraulic Proof test 1hour / 27°C)	-	500	-
7.2.3((a) Acceptance Test (48 hrs) / 80˚ C)	-	1500	-
7.2.3((b) Type test ( 165 hrs) / 80˚ C)	-	4500	-
8(Supply of pipe (Visual))	-	0	-

24 Sep, 2027

-
Upto and included 500 mm Nominal Dia.

10404

The Synthetic and Art Silk Mills' Research Association (SASMIRA), MUMBAI

7175004

IS 16709 (2017)

Textiles - Polypropylene (PP) woven, laminated, block bottom valve sacks for packaging of 50 kg cement - Specification

17500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.1(Sack Length)	-	400	-
4.1.2(Sack Width)	-	400	-
4.1.3(Top Closure Width and Bottom Closure Width)	-	400	-
4.1.4(Patch Length)	-	400	-
4.1.5(Patch Height)	-	400	-
4.1.6(Length of Valve)	-	400	-
4.1.7(Width of Valve Sleeve)	-	400	-
4.1.8(Length of Valve Sleeve)	-	400	-
5.1(Raw Material)	-	3500	-
5.2(Fabric)	-	700	-
5.2(Tape density and width)	-	800	-
5.4(Lamination for PP)	-	4500	-
5.4(Lamination for LDPE)	-	500	-
6.1(Mass of Bale)	-	400	-
6.2.1(Breaking Strength and Elongation at Break of Fabric)	-	1000	-
6.2.2(Weld Strength of Top and Bottom Closures)	-	1000	-
6.3(Drop Impact Testing of Filled Sacks)	-	1000	-
6.4(Ash Content)	-	900	-
6.5(Air Permeability)	-	0	Test not feasible
8(Atomspheric Conditions for Conditioning and Testing)	-	0	The test requires only conditioning of samples
4.1.1(Sack Length)	-	0	-
4.1.2(Sack Width)	-	0	-
4.1.3(Top Closure Width and Bottom Closure Width)	-	0	-
4.1.4(Patch Length)	-	0	-
4.1.5(Patch Height)	-	0	-
4.1.6(Length of Valve)	-	0	-
4.1.7(Width of Valve Sleeve)	-	0	-
4.1.8(Length of Valve Sleeve)	-	0	-
5.1(Raw Material)	-	0	-
5.2(Fabric)	-	0	-
5.2(Tape density and width)	-	0	-
5.4(Lamination for PP)	-	0	-
5.4(Lamination for LDPE)	-	0	-
6.1(Mass of Bale)	-	0	-
6.2.1(Breaking Strength and Elongation at Break of Fabric)	-	0	-
6.2.2(Weld Strength of Top and Bottom Closures)	-	0	-
6.3(Drop Impact Testing of Filled Sacks)	-	0	-
6.4(Ash Content)	-	0	-
8(Atomspheric Conditions for Conditioning and Testing)	-	0	-

14 Dec, 2026

-
-

10405

CTL TESTING LABORATORY PRIVATE LIMITED, JAIPUR

8180306

IS 14333 (2022)

Polyethylene Pipes for Sewerage and Industrial Chemicals and Effluent ï¿½ Specification (First Revision)

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2.1,T2("Base Density (At 27°C Temp.)-IS 7328:2020 ")	-	750	-
5.2.1,T2(Melt Flow Rate (At 190°C /5kg)-IS 2530:1963)	-	1500	-
5.2.1,T2(Thermal Stability(Oxidation Induction Time)-IS 4984:2016(Annexure-B))	-	2500	-
5.2.1,T2("Volatile Matter- IS 4984:2016 (Annexure-C)")	-	1500	-
5.2.1,T2("Water Content-IS 4984:2016 (Annexure-D)")	-	1000	-
5.2.1.1, T2(Compound Density-IS 7328:2020)	-	750	-
5.2.1.1, T2("Compound carbon black -IS 2530:1963 content")	-	1000	-
5.2.1.1, T2(Compound Toluene extract - Any Method)	-	1000	-
5.2.1.1, T2(Compound maximum volatile matter -IS 4984:2016 (Annexure-C))	-	1500	-
5.2.1.1, T2(Compound carbon black particle size- Any Method)	-	1500	-
5.2.1.1, T2(Compound ash content - Any Method)	-	1500	-
5.2.1.1, T2("Compound carbon black -IS 2530:1963 dispersion")	-	1500	-
5.3(Density of Higher olefin - IS 7328:2020)	-	750	-
5.3(Olefin Constituents- 14333-2022)	-	1000	-
5.3(Loading of Carbon Black - IS 2530:1963)	-	1000	-
5.3(Ash content- Any Method)	-	1000	-
5.3(Toluene extract - Any Method)	-	1500	-
5.3("Maximum volatile matter -IS 4984:2016 (Annexure-C)")	-	1500	-
5.3(Carbon black particle size - Any Method)	-	0	-
5.4(Antioxidant - Any Method)	-	1500	-
6(Pipe Description - IS 14333-2022)	-	0	-
6.2(Colour- IS 14333-2022)	-	500	-
7.1(Visual Appearance- IS 14333-2022)	-	500	-
7.2(Length- IS 14333-2022)	-	500	-
7.3(Coiling- IS 14333-2022)	-	0	-
7.4,T3 of IS 4984(Outside Diameter-IS 4984-2016)	-	250	-
7.4,T4 of IS 4984(wall Thickness-IS 4984-2016)	-	250	-
7.4,T3 of IS 4984(Ovality-IS 4984-2016)	-	250	-
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 27 oC , Test Period - 100 hrs.-IS 4984-2016 (Annexure-E))	-	2500	-
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 48 hrs.-IS 4984-2016 (Annexure-E))	-	2500	-
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 165 hrs.-IS 4984-2016 (Annexure-E))	-	3500	-
8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 1000 hrs.-IS 4984-2016 (Annexure-E))	-	8500	-
8.1.2, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 48 hrs.-IS 4984-2016 (Annexure-E))	-	2500	-
8.2("Longitudinal Reversion Test - IS 4984-2016 (Annexure-F)")	-	1500	-
8.3(Carbon black content- IS 2530-1963)	-	1500	-
8.3(Carbon black content Dispersion- IS 2530-1963)	-	1000	-
8.4(Melt Flow rate(Temperature - 190oC,Mass 5kg)-IS 2530-1963)	-	1500	-
8.5(Oxidation Induction Time -IS 4984:2016(Annexure-B))	-	2500	-
8.6(Density-IS 7328:2020)	-	1000	-
8.7("Tensile Strength for Butt Fusion - IS 4984-2016 (Annexure-G)")	-	1000	-
8.8,T5("Tensile - IS 4984-2016 (Annexure-H)")	-	1000	-
8.8,T5("Elongation -IS 4984-2016 (Annexure-H)")	-	1000	-
8.9(Slow Crack Growth Rate{Internal Pressure creep Rupture test, Temperature - 80±1 oC , Test Pressure – 0.80MPa, Test Period - 500 hrs.-IS 4984-2016 (Annexure-E &J))	-	3500	-

24 Sep, 2027

-
Upto and included 500 mm Nominal Dia.

10406

Cotecna Inspection India Private Limited, Gurugram

8166106

IS 17526 (2021)

STAINLESS STEEL VACUUM FLASKS - SPECIFICATION

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Manufacture and Workmanship)	-	500	-
5.3(Manufacture and Workmanship)	-	500	-
7.1.1(Material- Inner containers)	-	500	-
7.1.2(Outer protective case and accessories - Thickness)	-	500	-
7.1.2.1(Coating - Limit of lead)	-	1000	-
7.1.2.1(Coating - Limit of Cadmium)	-	1000	-
7.1.4(Auxillary closure "Bisphenol A (BPA)")	-	4500	-
7.3(Capacity)	-	500	-
7.4(Heat Retention Capability)	-	2000	-
7.5(Cold Retention Capability)	-	1000	-
7.6.1(Drop Impact Test)	-	500	-
7.6.2(Pendulum Impact Test)	-	500	-
7.7(Fixing Strength of the Handle)	-	750	-
7.8(Test for Strength of Shoulder Strap)	-	750	-
7.8.1(Test for strength of cord)	-	750	-
7.9(Leakage Test)	-	500	-
7.10(Joint Leak Test)	-	500	-
7.11(Staining Test)	-	1000	-
7.12(Length of the Shoulder Strap)	-	500	-
7.13(Stability of Flask/Bottle)	-	500	-
7.14(Pour Test)	-	500	-
9.1(Marking)	-	250	-
9.2(BIS certification marking)	-	250	-
10(Packaging)	-	250	-
5(Manufacture and Workmanship)	-	500	-
7.1.2.1(Coating - Limit of lead)	-	1000	-
7.1.2.1(Coating - Limit of Cadmium)	-	1000	-
7.1.4(Auxillary closure "Bisphenol A (BPA)")	-	4500	-
7.3(Capacity)	-	500	-
7.4(Heat Retention Capability)	-	2000	-
7.5(Cold Retention Capability)	-	1000	-
7.6.1(Drop Impact Test)	-	500	-
7.6.2(Pendulum Impact Test)	-	500	-
7.7(Fixing Strength of the Handle)	-	750	-
7.8(Test for Strength of Shoulder Strap)	-	750	-
7.8.1(Test for strength of cord)	-	750	-
7.9(Leakage Test)	-	500	-
7.10(Joint Leak Test)	-	500	-
7.11(Staining Test)	-	1000	-
7.12(Length of the Shoulder Strap)	-	500	-
7.13(Stability of Flask/Bottle)	-	500	-
7.14(Pour Test)	-	500	-
9.1(Marking)	-	250	-
9.2(BIS certification marking)	-	250	-
10(Packaging)	-	250	-
7.1.2.1(Coating- Thickness test)	-	1000	-
7.1.2.1(Coating- Adhesion test)	-	1000	-
7.1.2.1(Coating- Salt Water corrosion test)	-	2000	-
7.2(Arrangement for holding and suspension)	-	500	-
7.15 (Amendment 1)(Endurance test for O-Ring, Washer and Stopper)	-	2500	-
7.1.3(Overall migration)	-	5000	-
7.1.3 (Amendment 1)(O-Ring and washer- Hardness)	-	1000	-
7.1.3 (Amendment 1)(O-Ring and washer-- BPA)	-	1000	-
7.1.2(Outer protective case and accessories - Thickness)	-	1000	-
5(Manufacture and Workmanship)	-	500	-
7.1.2.1(Coating - Limit of lead)	-	1000	-
7.1.2.1(Coating - Limit of Cadmium)	-	1000	-
7.1.4(Auxillary closure "Bisphenol A (BPA)")	-	4500	-
7.3(Capacity)	-	500	-
7.4(Heat Retention Capability)	-	2000	-
7.5(Cold Retention Capability)	-	1000	-
7.6.1(Drop Impact Test)	-	500	-
7.6.2(Pendulum Impact Test)	-	500	-
7.7(Fixing Strength of the Handle)	-	750	-
7.8(Test for Strength of Shoulder Strap)	-	750	-
7.8.1(Test for strength of cord)	-	750	-
7.9(Leakage Test)	-	500	-
7.10(Joint Leak Test)	-	500	-
7.11(Staining Test)	-	1000	-
7.12(Length of the Shoulder Strap)	-	500	-
7.13(Stability of Flask/Bottle)	-	500	-
7.14(Pour Test)	-	500	-
9.1(Marking)	-	250	-
9.2(BIS certification marking)	-	250	-
10(Packaging)	-	250	-
7.1.2.1(Coating- Thickness test)	-	1000	-
7.1.2.1(Coating- Adhesion test)	-	1000	-
7.1.2.1(Coating- Salt Water corrosion test)	-	2000	-
7.2(Arrangement for holding and suspension)	-	500	-
7.15 (Amendment 1)(Endurance test for O-Ring, Washer and Stopper)	-	2500	-
7.1.3(Overall migration)	-	5000	-
7.1.3 (Amendment 1)(O-Ring and washer- Hardness)	-	1000	-
7.1.3 (Amendment 1)(O-Ring and washer-- BPA)	-	1000	-
7.1.2(Outer protective case and accessories - Thickness)	-	1000	-

28 Oct, 2029

-
Included w.e.f 30.01.2025

10407

CTL TESTING LABORATORY PRIVATE LIMITED, JAIPUR

8180306

IS 4984 (2016)

Polyethylene pipes for water supply - Specification (Fifth Revision)

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.10(Slow Crack Growth Rate)	-	2500	-
8.9 table-6(Elongation at Break)	-	1500	-
8.8(Tensile Strength for Butt-fusion)	-	1500	-
8.7(Density)	-	1000	-
8.5 (Oxidation Induction Time)	-	1500	-
8.4( Melt Flow Rate)	-	1500	-
8.2(Longitudinal Reversion Test)	-	1500	-
8.1.2 table -5(Internal Pressure Creep Rupture Test of Pipe Joints)	-	2500	-
8,/8.1/8.1.1 table-5(PERFORMANCE REQUIREMENTS / Hydraulic Characteristics/ Internal Pressure Creep Rupture Test of Pipe)	-	20000	-
7.4.1.2(Ovality)	-	500	-
Cl-7.4(Mean Outside Diameter (For upto 50 mm take 8 reading, above 50mm take 6 reading & average will be reported))	-	1000	-
7.2(Length)	-	500	-
6.2.1(6.1.1 Identification Stripes)	-	500	-
6.2(Colour)	-	500	-
6.1.4(PIPE DESCRIPTION)	-	0	-
6.1.3 (PIPE DESCRIPTION)	-	0	-
6, 6.1.2(PIPE DESCRIPTION)	-	0	-
6, 6.1.1(PIPE DESCRIPTION)	-	0	-
6, 6.1(PIPE DESCRIPTION)	-	0	-
8.6(Overall migration)	-	2500	-
8.3(Carbon black)	-	1500	-
5.4(Anti oxydent)	-	2500	-
5.3(e)(Carbon Black Master Batch)	-	1000	-
5.3(d)(Carbon Black Master Batch)	-	1000	-
5.3(c)(Carbon Black Master Batch)	-	1000	-
5.3(b)(Carbon Black Master Batch)	-	1000	-
5.3 (a)(Carbon Black Master Batch)	-	1000	-
5.2(Polyethylene Resin)	-	1000	-
5, 5.1 table-1(MATERIALS)	-	0	-
7()	-	0	-
5.2(Density)	-	1000	-
5.2(MFI @ 1900C/5.0 Kg)	-	1500	-
5.2(Volatile matter Content)	-	1000	-
5.3(Toluene Extract)	-	1000	-
Clause 7.1(Visual Apperance)	-	0	-
Clause 7.3(Coiling)	-	0	-
Clause 8.3(Carbon Black content)	-	0	-
Clause 8.3(Carbon Black Dispersion)	-	0	-
Clause 8.6(Overall migration (stimulate))	-	2500	-
Clause 8.6(Overall migration (surface of material))	-	2500	-
7.1(Visual Appearance)	-	0	-
7.3(Coiling)	-	0	-
Table-2 (iii, iv)(Thermal Stability (Oxidation Induction Time), Volatile Matter)	-	0	-
Cl. 8.3(Carbon Black Content)	-	0	-
Cl. 8.3(Carbon Black Dispersion)	-	0	-
5.2,T2(Melt Flow rate(Temperature - 190oC,Mass 5kg)-IS 2530-1963)	-	0	-
8.7(Density-IS 7328:2020)	-	0	-
8.7(Corrected Density- IS 7328:2020)	-	0	-
8.9,T6("Tensile - IS 4984-2016 (Annexure-H)")	-	1500	-
8.9,T6("Elongation -IS 4984-2016 (Annexure-H)")	-	1500	-
Cl 8.3(Carbon Black Content)	-	0	-
Cl 8.3(Carbon Black Dispersion)	-	0	-

24 Sep, 2027

-
Upto and included 500 mm Nominal Dia.

10408

Cotecna Inspection India Private Limited, Gurugram

8166106

IS 17569 (2021)

Insulated Containers for Food Storage — Specification

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Manufacture and Workmanship)	-	500	-
5.3(Manufacture and Workmanship)	-	0	-
7.1(Material)	-	0	-
7.1.2(Thickness)	-	500	-
7.1.2.1(Requirements and Tests(Material) – Outer Protective Case and Accessories – Lead)	-	1000	-
7.1.2.1(Requirements and Tests(Material) – Outer Protective Case and Accessories – Cadmium)	-	1000	-
7.1.2.8(Bisphenol A(BPA))	-	4500	-
7.3(Capacity)	-	500	-
7.4(Heat Retention Capability)	-	2000	-
7.5(Cold Retention Capability)	-	1000	-
7.6.1(Drop Impact Test)	-	500	-
7.6.2(Pendulum Impact Test)	-	500	-
7.7(Fixing Strength of the Handle)	-	750	-
7.8(Test for Strength of Shoulder Strap)	-	750	-
7.9(Leakage Test)	-	500	-
7.10(Joint Leak Test)	-	500	-
7.11(Staining Test)	-	1000	-
7.12("Check for PUF (Polyurethane Foam) or any Other Similar Thermal Insulation Material ")	-	1000	-
7.13.1(Length of the Shoulder Strap)	-	250	-
7.13.2(Stability of Insulated Container)	-	500	-
7.13.3(Cleaning)	-	250	-
7.14(Seepage Test)	-	500	-
9.1(Marking)	-	500	-
9.2(BIS certification marking)	-	250	-
10(Packaging)	-	250	-
CLAUSE 5.2(Welding Defects)	-	100	-
CLAUSE 7.1(Materials)	-	0	-
CLAUSE 7.1.2.2(Thickness of plastic)	-	250	-
"CLAUSE 7.1.2.1 "(Minimum Thickness of Outer Container)	-	250	-
"CLAUSE 7.1.2.1 "(Coating Thickness)	-	500	-
"CLAUSE 7.1.2.1 "(Salt Water Corrosion Test)	-	2000	-
CLAUSE 7.1.2.1(Adhesion Test)	-	1500	-
CLAUSE 7.1.2.1(Lead Limit)	-	2000	-
CLAUSE 7.1.2.1(Cadmium Limit)	-	2000	-
CLAUSE 7.1.2.3(Outer container or lid - thickness)	-	250	-
CLAUSE 7.3(Capacity)	-	500	-
CLAUSE 7.4(Heat Retention Capability)	-	2000	-
CLAUSE 7.5(Cold Retention Capability)	-	1000	-
CLAUSE 7.6.1(Drop Impact)	-	500	-
CLAUSE 7.6.2(Pendulum Impact)	-	500	-
CLAUSE 7.7(Fixing Strength of Handle)	-	750	-
CLAUSE 7.8(Test for Strength of Shoulder Strap)	-	750	-
CLAUSE 7.9(Leakage Test)	-	500	-
CLAUSE 7.10(Joint Leak Test)	-	500	-
CLAUSE 7.11(Staining Test)	-	1000	-
CLAUSE 7.12(Checking of PUF insulation)	-	1000	-
CLAUSE 7.13.1(Length of the Shoulder Strap)	-	250	-
CLAUSE 7.13.2(Stability of Flask)	-	500	-
CLAUSE 7.1.1(Material - inner container)	-	0	-
5(Manufacture and Workmanship)	-	500	-
7.1.2(Thickness)	-	500	-
7.1.2.1(Requirements and Tests(Material) – Outer Protective Case and Accessories – Lead)	-	1000	-
7.1.2.1(Requirements and Tests(Material) – Outer Protective Case and Accessories – Cadmium)	-	1000	-
7.1.2.8(Bisphenol A(BPA))	-	4500	-
7.3(Capacity)	-	500	-
7.4(Heat Retention Capability)	-	2000	-
7.5(Cold Retention Capability)	-	1000	-
7.6.1(Drop Impact Test)	-	500	-
7.6.2(Pendulum Impact Test)	-	500	-
7.7(Fixing Strength of the Handle)	-	750	-
7.8(Test for Strength of Shoulder Strap)	-	750	-
7.9(Leakage Test)	-	500	-
7.10(Joint Leak Test)	-	500	-
7.11(Staining Test)	-	1000	-
7.12("Check for PUF (Polyurethane Foam) or any Other Similar Thermal Insulation Material ")	-	1000	-
7.13.1(Length of the Shoulder Strap)	-	250	-
7.13.2(Stability of Insulated Container)	-	500	-
7.13.3(Cleaning)	-	250	-
7.14(Seepage Test)	-	500	-
9.1(Marking)	-	500	-
9.2(BIS certification marking)	-	250	-
10(Packaging)	-	250	-
CLAUSE 5.2(Welding Defects)	-	100	-
CLAUSE 7.1.2.2(Thickness of plastic)	-	250	-
"CLAUSE 7.1.2.1 "(Minimum Thickness of Outer Container)	-	250	-
"CLAUSE 7.1.2.1 "(Coating Thickness)	-	500	-
"CLAUSE 7.1.2.1 "(Salt Water Corrosion Test)	-	2000	-
CLAUSE 7.1.2.1(Adhesion Test)	-	1500	-
CLAUSE 7.1.2.1(Lead Limit)	-	2000	-
CLAUSE 7.1.2.1(Cadmium Limit)	-	2000	-
CLAUSE 7.1.2.3(Outer container or lid - thickness)	-	250	-
CLAUSE 7.3(Capacity)	-	500	-
CLAUSE 7.4(Heat Retention Capability)	-	2000	-
CLAUSE 7.5(Cold Retention Capability)	-	1000	-
CLAUSE 7.6.1(Drop Impact)	-	500	-
CLAUSE 7.6.2(Pendulum Impact)	-	500	-
CLAUSE 7.7(Fixing Strength of Handle)	-	750	-
CLAUSE 7.8(Test for Strength of Shoulder Strap)	-	750	-
CLAUSE 7.9(Leakage Test)	-	500	-
CLAUSE 7.10(Joint Leak Test)	-	500	-
CLAUSE 7.11(Staining Test)	-	1000	-
CLAUSE 7.12(Checking of PUF insulation)	-	1000	-
CLAUSE 7.13.1(Length of the Shoulder Strap)	-	250	-
CLAUSE 7.13.2(Stability of Flask)	-	500	-
C 7.1.1 Note Annex C(Test for leaching of food grade stainless steel)	-	2000	-
CL 7.1.1 Note- Annex D(Sensational test method)	-	1000	-
Cl 7.1.2.2(Polymer - test for BPA)	-	4500	-
Cl 7.1.2.4(Silicon gasket - overall migration)	-	1000	-
Cl 7.1.2.4(Silicon gasket - defects)	-	250	-
Cl 7.1.2.5(Performance requirement for glass lid - Fragmentation test (Cl 8.15.1 of IS 2347))	-	500	-
Cl 7.1.2.5(Performance requirement for glass lid - Ball drop test (Cl 8.15.2 of IS 2347))	-	500	-
Cl 7.1.2.5(Performance requirement for glass lid - Thermal shock test (Cl 8.15.3 of IS 2347))	-	500	-
Cl 7.1.2.5(Performance requirement for glass lid - Free fall test (Cl 8.15.4 of IS 2347))	-	500	-
Cl 7.1.2.5(Thickness of steel rim)	-	250	-
Cl 7.1.2.5(Thickness of glass lid)	-	250	-
Cl 7.1.2.6(Thermal insulating material)	-	250	-
Cl 7.1.2.8(Hot/Cold Box - thickness)	-	250	-
Cl 7.1.2.9(Internal utensils- thickness)	-	250	-
Cl 7.1.2.9(Internal utensils - thickness of plastic lid)	-	250	-
Cl 7.1.2.9(Test for BPA)	-	4500	-
5(Manufacture and Workmanship)	-	-	-
7.1.2(Thickness)	-	-	-
7.1.2.1(Requirements and Tests(Material) – Outer Protective Case and Accessories – Lead)	-	-	-
7.1.2.1(Requirements and Tests(Material) – Outer Protective Case and Accessories – Cadmium)	-	-	-
7.1.2.8(Bisphenol A(BPA))	-	-	-
7.3(Capacity)	-	-	-
7.4(Heat Retention Capability)	-	-	-
7.5(Cold Retention Capability)	-	-	-
7.6.1(Drop Impact Test)	-	-	-
7.6.2(Pendulum Impact Test)	-	-	-
7.7(Fixing Strength of the Handle)	-	-	-
7.8(Test for Strength of Shoulder Strap)	-	-	-
7.9(Leakage Test)	-	-	-
7.10(Joint Leak Test)	-	-	-
7.11(Staining Test)	-	-	-
7.12("Check for PUF (Polyurethane Foam) or any Other Similar Thermal Insulation Material ")	-	-	-
7.13.1(Length of the Shoulder Strap)	-	-	-
7.13.2(Stability of Insulated Container)	-	-	-
7.13.3(Cleaning)	-	-	-
7.14(Seepage Test)	-	-	-
9.1(Marking)	-	-	-
9.2(BIS certification marking)	-	-	-
10(Packaging)	-	-	-
CLAUSE 5.2(Welding Defects)	-	-	-
CLAUSE 7.1.2.2(Thickness of plastic)	-	-	-
"CLAUSE 7.1.2.1 "(Minimum Thickness of Outer Container)	-	-	-
"CLAUSE 7.1.2.1 "(Coating Thickness)	-	-	-
"CLAUSE 7.1.2.1 "(Salt Water Corrosion Test)	-	-	-
CLAUSE 7.1.2.1(Adhesion Test)	-	-	-
CLAUSE 7.1.2.1(Lead Limit)	-	-	-
CLAUSE 7.1.2.1(Cadmium Limit)	-	-	-
CLAUSE 7.1.2.3(Outer container or lid - thickness)	-	-	-
CLAUSE 7.3(Capacity)	-	-	-
CLAUSE 7.4(Heat Retention Capability)	-	-	-
CLAUSE 7.5(Cold Retention Capability)	-	-	-
CLAUSE 7.6.1(Drop Impact)	-	-	-
CLAUSE 7.6.2(Pendulum Impact)	-	-	-
CLAUSE 7.7(Fixing Strength of Handle)	-	-	-
CLAUSE 7.8(Test for Strength of Shoulder Strap)	-	-	-
CLAUSE 7.9(Leakage Test)	-	-	-
CLAUSE 7.10(Joint Leak Test)	-	-	-
CLAUSE 7.11(Staining Test)	-	-	-
CLAUSE 7.12(Checking of PUF insulation)	-	-	-
CLAUSE 7.13.1(Length of the Shoulder Strap)	-	-	-
CLAUSE 7.13.2(Stability of Flask)	-	-	-
C 7.1.1 Note Annex C(Test for leaching of food grade stainless steel)	-	-	-
CL 7.1.1 Note- Annex D(Sensational test method)	-	-	-
Cl 7.1.2.2(Polymer - test for BPA)	-	-	-
Cl 7.1.2.4(Silicon gasket - overall migration)	-	-	-
Cl 7.1.2.4(Silicon gasket - defects)	-	-	-
Cl 7.1.2.5(Performance requirement for glass lid - Fragmentation test (Cl 8.15.1 of IS 2347))	-	-	-
Cl 7.1.2.5(Performance requirement for glass lid - Ball drop test (Cl 8.15.2 of IS 2347))	-	-	-
Cl 7.1.2.5(Performance requirement for glass lid - Thermal shock test (Cl 8.15.3 of IS 2347))	-	-	-
Cl 7.1.2.5(Performance requirement for glass lid - Free fall test (Cl 8.15.4 of IS 2347))	-	-	-
Cl 7.1.2.5(Thickness of steel rim)	-	-	-
Cl 7.1.2.5(Thickness of glass lid)	-	-	-
Cl 7.1.2.6(Thermal insulating material)	-	-	-
Cl 7.1.2.8(Hot/Cold Box - thickness)	-	-	-
Cl 7.1.2.9(Internal utensils- thickness)	-	-	-
Cl 7.1.2.9(Internal utensils - thickness of plastic lid)	-	-	-
Cl 7.1.2.9(Test for BPA)	-	-	-

28 Oct, 2029

-
Included w.e.f. 07.02.2025

10409

Cotecna Inspection India Private Limited, Gurugram

8166106

IS 17790 (2022)

INSULATED FLASK FOR DOMESTIC USE SPECIFICATION

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.0(Manufacture and Workmanship)	-	500	-
5.3(Welding Defects)	-	0	-
7.1(Material)	-	0	-
7.1.2.1 & 7.1.2.2(Thickness)	-	500	-
7.1.3(Coating Thickness)	-	500	-
7.1.2.2(Bisphenol A (BPA))	-	4500	-
7.1.4.3(O-Ring / Washer- Defects)	-	500	-
7.2(Capacity)	-	500	-
7.3(Heat Retention Capability)	-	2000	-
7.4(Cold Retention Capability)	-	1000	-
7.5.1(Drop Impact Test)	-	1000	-
7.5.2(Pendulum Impact Test)	-	1000	-
7.6(Fixing Strength of the Handle)	-	1000	-
7.7(Test for Strength of Shoulder Strap)	-	1000	-
7.8(Test for strength of cord)	-	1000	-
7.9(Leakage Test)	-	500	-
7.10(Joint Leak Test)	-	500	-
7.11(Staining Test)	-	500	-
7.13(Seepage test)	-	500	-
7.14(Test for Lever, device for operating Or regulating flow test)	-	1000	-
7.15(Test for length of the shoulder cap)	-	500	-
7.16(Stability of Flask)	-	500	-
7.17(Pour Test)	-	1000	-
9.1(Marking)	-	500	-
9.2(BIS certification marking)	-	500	-
10(Packaging)	-	500	-
7.1.3(Material – coating cadmium)	-	1000	-
5.0(Manufacture and Workmanship)	-	500	-
5.3(Welding Defects)	-	0	-
7.1(Material)	-	0	-
7.1.2.1 & 7.1.2.2(Thickness)	-	500	-
7.1.3(Coating Thickness)	-	1000	-
7.1.2.2(Bisphenol A (BPA))	-	4500	-
7.1.4.3(O-Ring / Washer- Defects)	-	500	-
7.2(Capacity)	-	500	-
7.3(Heat Retention Capability)	-	2000	-
7.4(Cold Retention Capability)	-	1000	-
7.5.1(Drop Impact Test)	-	1000	-
7.5.2(Pendulum Impact Test)	-	1000	-
7.6(Fixing Strength of the Handle)	-	1000	-
7.7(Test for Strength of Shoulder Strap)	-	1000	-
7.8(Test for strength of cord)	-	1000	-
7.9(Leakage Test)	-	500	-
7.10(Joint Leak Test)	-	500	-
7.11(Staining Test)	-	500	-
7.13(Seepage test)	-	500	-
7.14(Test for Lever, device for operating Or regulating flow test)	-	500	-
7.15(Test for length of the shoulder cap)	-	500	-
7.16(Stability of Flask)	-	500	-
7.17(Pour Test)	-	1000	-
9.1(Marking)	-	500	-
9.2(BIS certification marking)	-	500	-
10(Packaging)	-	500	-
7.1.3(Material – coating cadmium)	-	1000	-
7.1.3(Coating- Adhesion test)	-	1000	-
7.1.3(Coating - Thickness test)	-	500	-
7.1.3(Coating- Salt water corrosion test)	-	2000	-
7.1.4.1(Stopper)	-	2000	-
7.1.4.2(O-ring/washer- Overall migration)	-	1000	-
7.1.4.2(O-ring/washer- BPA)	-	4500	-
7.1.5(Auxillary closure)	-	2000	-
7.12(Check for PUF (Polyurethane Foam) or Any Other Similar Thermal Insulation Material)	-	1000	-
7.18(Endurance Test for O-Ring, Washer and Stopper)	-	1000	-
7.1.4.2(O-ring/washer- Shore hardness)	-	1000	-

28 Oct, 2029

-
Included w.e.f. 07.02.2025

10410

BIS, Bengaluru Branch Laboratory (BNBL)

None

IS 12786 (2024)

Irrigation equipment - Polyethylene pipes for irrigation laterals - Specification (first revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.2(a) (Carbon Black Content-IS 2530)	-
4.2(b) (Carbon Black Dispersion-IS 2530)	-
3 (Class of Pipe)	-
5.1 & Table 1 (Dimensions of Pipes - Outside diameters)	-
5.1 & Table 1 (Dimensions of Pipes - Wall thickness)	-
6 (Visual Appearance)	-
7.1 & Table 2 (Hydraulic Characteristics)	-
7.1 & Table 2 (Hydraulic Characteristics)	-
7.2 (Reversion Test)	-
7.3 (Tensile Strength)	-
7.3 (Elongation at Break)	-
7.4 (SusceptibiIity to Environmental Stress Cracking)	-

-
Complete for chemical section.

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number