BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15122 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

10651

SHRIRAM FOOD AND PHARMA RESEARCH CENTRE, GHAZIABAD

9179606

IS 517 (2020)

Specification for Methanol ( Methyl Alcohol ) ( Third Revision )

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table-1(Relative Density)	-	500	-
Table-1(Distillation range)	-	2000	-
Table-1(Residue on evaporation)	-	500	-
Table-1(Alkalinity)	-	500	-
Table-1(Acidity)	-	500	-
Table-1(Aldehydes and Ketones)	-	500	-
Table-1(Sulphur and compounds of Sulphur)	-	500	-
Table-1(Chlorines and Chlorine compound)	-	500	-
Table-1(Water compound)	-	1500	-
Table-1(Purity)	-	3000	-
Cl-4.4, Table-2 (i)(Acidity as acetic acid, percent by mass, Ma)	-	500	-
Cl-4.4, Table-2 (ii)(Aldehydes and ketones as acetone (CH3COCH3), percent by mass, Max)	-	500	-
Cl-4.4, Table-2 (iii)(Residue on evaporation, percent by mass, Max)	-	500	-
Cl-4.1(Description)	-	100	-
Cl-4.2(Miscibility with Water)	-	500	-
4.4 and 7.1 Table 2, i(Acidity as acetic acid)	-	500	-
4.4 and 7.1 Table 2, iii(Residue on evaporation)	-	500	-
4.4 and 7.1 Table 2, ii(Aldehydes and ketones as acetone (CH3COCH3))	-	500	-
4.4 and 7.1 Table 2, ii(Aldehydes and ketones as acetone (CH3COCH3))	-	500	-

20 Aug, 2027

-
-

10652

SHRIRAM FOOD AND PHARMA RESEARCH CENTRE, GHAZIABAD

9179606

IS 336 (2021)

Ether

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Description)	-	100	-
4.2(Odour and Taste)	-	500	-
4.2.1(Ether, Anaesthetic)	-	3000	-
4.4(Solubility)	-	500	-
4.5 Table 1 (i)(Relative density at 20°C/20°C)	-	500	-
4.5 Table 1 (ii)(Peroxides)	-	500	-
4.5 Table 1 (iii)(Distillation range)	-	2500	-
4.5 Table 1 (iv)(Residue on evaporation)	-	500	-
4.5 Table 1 (v)(Methyl alcohol)	-	1000	-
4.5 Table 1 (vi)(Aldehyde and acetone)	-	500	-
Ether(Sulphurous acid and other free acids)	-	500	-

20 Aug, 2027

-
-

10653

THE SOUTH INDIA TEXTILE RESEARCH ASSOCIATION (SITRA), COIMBATORE

6165234

IS 17265 (2023)

Textiles 100 Percent Polyester Spun Grey and White Yarns Specification Second Revision

36450 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.No. 4(CLASSIFICATIONS)	-	700	Excluding GST
Cl.No. 5.1, Table no. 1("Designation of Yarn ")	-	340	Excluding GST
Cl.No.5.2 , Table no. 2(IDENTIFICATION AND DESCRIPTION)	-	800	Excluding GST
Cl.No. 6.1,6.2,8.2. Table no. 3(i)(Mean linear density (Count))	-	360	Excluding GST
Cl.No. 6.1,6.2,8.2. Table no. 3(ii)(Twist per metre,)	-	0	Parameter repeated
Cl.No. 6.1,6.2,8.2. Table no. 3(iii)(Average Single yarn tenacity)	-	530	Excluding GST
Cl.No. 6.1,6.2,8.2. Table no. 3(iv)(Elongation)	-	0	Parameter repeated
Cl.No. 6.1,6.2,8.2. Table no. 3(vi)(Yarn hairiness index)	-	400	Excluding GST
Cl.No. 6.1,6.2,8.2. Table no. 3(vii)(Whiteness index of polyester spun yarn)	-	400	Excluding GST
Cl.No. 6.1,6.2 Table no. 4(i)(Moisture regain)	-	350	Excluding GST
Cl.No. 6.1,6.2 Table no. 4(ii)(Isophthalic Acid (IPA) content)	-	4000	Excluding GST
Cl.No. 6.1,6.2 Table no. 4(iii)(Water soluble matter)	-	300	Excluding GST
Cl.No. 6.1,6.2 Table no. 4(iv)(Phosphorus content)	-	1000	Excluding GST
Cl.No. 6.1,6.2 Table no. 4(vi)(Anti-microbial activity value)	-	2850	Excluding GST
Cl.No. 6.1,6.2 Table no. 4(vii)("Wettability of woven or knitted fabrics (about 150 gsm) made from the yarns")	-	400	Excluding GST
Cl.No. 6.1,6.2,8.2. Table no. 4(viii)("Wicking characteristic of woven or knitted fabrics (about 150 gsm) made from the yarn")	-	500	Excluding GST
Cl.No. 6.3(Freedom from Yarn Defects)	-	1000	Excluding GST
Cl.No. 6.4, Table no. 5(Yarn Unevenness and Yarn Imperfections)	-	500	Excluding GST
Cl.No. 6.5,(Objectionable Faults)	-	1070	Excluding GST
Cl.No. 6.6(Commercial Mass)	-	1000	Excluding GST
Cl.No. 6.7, Table no. 7(i)("Light ")	-	1200	Excluding GST
Cl.No. 6.7, Table no. 7(ii)(Washing)	-	300	Excluding GST
Cl.No. 6.7, Table no. 7(iii)(Rubbing)	-	300	Excluding GST
Cl.No. 6.7, Table no. 7(iv)(Perspiration)	-	450	Excluding GST
Cl.No. 6.8, Table no. 8(i)(Free and releasable formaldehyde)	-	1600	Excluding GST
Cl.No. 6.8, Table no. 8(ii)("Extractable heavy metals by artificial Acidic sweat/saliva")	-	5600	Excluding GST
Cl.No. 6.8, Table no. 8(iii)(Pentachlorophenol)	-	2000	Excluding GST
Cl.No. 6.8, Table no. 8(iv)(Pesticides (Sum parameter))	-	5000	Excluding GST
Cl.No. 6.8, Table no. 8(v)(Banned Pesticides)	-	0	Included
Cl.No. 6.8, Table no. 8(vi)(Banned azo colourants (arylamines))	-	3000	Excluding GST
Cl.No.8(MARKING)	-	250	Excluding GST
Cl.No. 6.1,6.2,8.2. Table no. 3(v)(Average Count strength product (CSP))	-	250	Excluding GST
Cl.No. 4(CLASSIFICATIONS)	-	0	Parameter repeated
Cl.No. 5.1, Table no. 1("Designation of Yarn ")	-	0	Parameter repeated
Cl.No.5.2 , Table no. 2(IDENTIFICATION AND DESCRIPTION)	-	0	Parameter repeated
Cl.No. 6.1,6.2,8.2. Table no. 3(i)(Mean linear density (Count))	-	0	Parameter repeated
Cl.No. 6.1,6.2,8.2. Table no. 3(ii)(Twist per metre,)	-	0	Parameter repeated
Cl.No. 6.1,6.2,8.2. Table no. 3(iii)(Average Single yarn tenacity)	-	0	Parameter repeated
Cl.No. 6.1,6.2,8.2. Table no. 3(iv)(Elongation)	-	0	Parameter repeated
Cl.No. 6.1,6.2,8.2. Table no. 3(vi)(Yarn hairiness index)	-	0	Parameter repeated
Cl.No. 6.1,6.2,8.2. Table no. 3(vii)(Whiteness index of polyester spun yarn)	-	0	Parameter repeated
Cl.No. 6.1,6.2 Table no. 4(i)(Moisture regain)	-	0	Parameter repeated
Cl.No. 6.1,6.2 Table no. 4(ii)(Isophthalic Acid (IPA) content)	-	0	Parameter repeated
Cl.No. 6.1,6.2 Table no. 4(iii)(Water soluble matter)	-	0	Parameter repeated
Cl.No. 6.1,6.2 Table no. 4(iv)(Phosphorus content)	-	0	Parameter repeated
Cl.No. 6.1,6.2 Table no. 4(vi)(Anti-microbial activity value)	-	0	Parameter repeated
Cl.No. 6.1,6.2 Table no. 4(vii)("Wettability of woven or knitted fabrics (about 150 gsm) made from the yarns")	-	0	Parameter repeated
Cl.No. 6.1,6.2,8.2. Table no. 4(viii)("Wicking characteristic of woven or knitted fabrics (about 150 gsm) made from the yarn")	-	0	Parameter repeated
Cl.No. 6.3(Freedom from Yarn Defects)	-	0	Parameter repeated
Cl.No. 6.4, Table no. 5(Yarn Unevenness and Yarn Imperfections)	-	0	Parameter repeated
Cl.No. 6.5,(Objectionable Faults)	-	0	Parameter repeated
Cl.No. 6.6(Commercial Mass)	-	0	Parameter repeated
Cl.No. 6.7, Table no. 7(i)("Light ")	-	0	Parameter repeated
Cl.No. 6.7, Table no. 7(ii)(Washing)	-	0	Parameter repeated
Cl.No. 6.7, Table no. 7(iii)(Rubbing)	-	0	Parameter repeated
Cl.No. 6.7, Table no. 7(iv)(Perspiration)	-	0	Parameter repeated
Cl.No. 6.8, Table no. 8(i)(Free and releasable formaldehyde)	-	0	Parameter repeated
Cl.No. 6.8, Table no. 8(ii)("Extractable heavy metals by artificial Acidic sweat/saliva")	-	0	Parameter repeated
Cl.No. 6.8, Table no. 8(iii)(Pentachlorophenol)	-	0	Parameter repeated
Cl.No. 6.8, Table no. 8(iv)(Pesticides (Sum parameter))	-	0	Parameter repeated
Cl.No. 6.8, Table no. 8(v)(Banned Pesticides)	-	0	Parameter repeated
Cl.No. 6.8, Table no. 8(vi)(Banned azo colourants (arylamines))	-	0	Parameter repeated
Cl.No.8(MARKING)	-	0	Parameter repeated
Cl.No. 6.1,6.2,8.2. Table no. 3(v)(Average Count strength product (CSP))	-	0	Parameter repeated

-
-

10654

BIS, Bengaluru Branch Laboratory (BNBL)

None

IS 1165 (2022)

WHOLE MILK POWDER - SPECIFICATION (Sixth Revision of IS 1165)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Discription)	-
3.2 (Flavour and Taste)	-
3.3 (extraneous matter)	-
Clause 3.5,Table 1 ,Sl No i) (Moisture)	-
Clause 3.5,Table 1 ,Sl No ii) (Total solids)	-
Clause 3.5,Table 1 ,Sl No iii) (Milk fat)	-
Clause 3.5,Table 1 ,Sl No iv) (Milk protein in milk solids not fat)	-
Clause 3.5,Table 1 ,Sl No v) (Insolubility index)	-
Clause 3.5,Table 1 ,Sl No vi) (Total ash(on dry basis))	-
Clause 3.5,Table 1 ,Sl No vii) (Titratable acidity (lactic acid),)	-
Clause 3.5,Table 1 ,Sl No viii) (Scorched particle)	-
Clause 3.7,Table 3, Sl No i) (Lead)	-
Clause 3.5,Table 2 ,Sl No i) (Aerobic plate count)	-
Clause 3.5,Table 2 ,Sl No ii) (Coliform Count)	-
Clause 3.5,Table 2 ,Sl No iii) (Staphylococcus aureus(Coagulase positive))	-
Clause 3.5,Table 2 ,Sl No iv) (Yeast and mould count)	-
Clause 3.5,Table 2 ,Sl No v) (Salmonella sp)	-
Clause 3.5,Table 2 ,Sl No vi) (Listeria monocytogenes)	-
Clause 3.5,Table 2 ,Sl No vii) (Bacillus cereus)	-
Clause 3.5,Table 2 ,Sl No viii) (Sulphite reducing clostridia)	-
Clause 3.5,Table 2 ,Sl No ix) (E. coli)	-

-
Test facility not available for Melamine

10655

THE SOUTH INDIA TEXTILE RESEARCH ASSOCIATION (SITRA), COIMBATORE

6165234

IS 17266 (2019)

Textiles – Viscose staple fibres – Specification

Virgin viscose staple fibre

7320 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.5(Commercial Mass)	-	1000	Excluding GST
3.1(Oil Pickup Unit)	-	750	Excluding GST
3.2(Abnormal Fibre and Other Matters)	-	250	Excluding GST
4/4.1 Table 1.( REQUIREMENTS)	-	3320	Excluding GST. Oil pick up parameter included in 3.1 and in Table 1. Hence, the charges are added only once.
4.3(Freedom from Defects)	-	250	Excluding GST
4.3.1( Dirt/Grease)	-	250	Excluding GST
4.3.2 (Damaged/Bumped Fibres)	-	250	Excluding GST
4.3.3(Finish Oil Contamination)	-	250	Excluding GST
4.3.4(Texture Colour/Appearance)	-	250	Excluding GST
4.3.5(Fluorescent Oil)	-	250	Excluding GST
4.3.6(Slubs/Loops/Kinks)	-	250	Excluding GST
4.3.7(None)	-	250	Excluding GST
Table -2 4.2(Additional Requirements for ECO-Mark (Optional))	-	24200	Excluding GST. Includes the charges for all the tests in Table 2. Since, these are only optional tests for Eco Mark, they are not added to the complete testing charges.
4.5(Commercial Mass)	-	0	Parameter repeated.
3.1(Oil Pickup Unit)	-	0	Parameter repeated.
3.2(Abnormal Fibre and Other Matters)	-	0	Parameter repeated.
4/4.1 Table 1.( REQUIREMENTS)	-	0	Parameter repeated.
4.3(Freedom from Defects)	-	0	Parameter repeated.
4.3.1( Dirt/Grease)	-	0	Parameter repeated.
4.3.2 (Damaged/Bumped Fibres)	-	0	Parameter repeated.
4.3.3(Finish Oil Contamination)	-	0	Parameter repeated.
4.3.4(Texture Colour/Appearance)	-	0	Parameter repeated.
4.3.5(Fluorescent Oil)	-	0	Parameter repeated.
4.3.6(Slubs/Loops/Kinks)	-	0	Parameter repeated.
4.3.7(None)	-	0	Parameter repeated.
Table -2 4.2(Additional Requirements for ECO-Mark (Optional))	-	0	Parameter repeated.
4.5(Commercial Mass)	-	0	Parameter repeated.
3.1(Oil Pickup Unit)	-	0	Parameter repeated.
3.2(Abnormal Fibre and Other Matters)	-	0	Parameter repeated.
4/4.1 Table 1.( REQUIREMENTS)	-	0	Parameter repeated.
4.3(Freedom from Defects)	-	0	Parameter repeated.
4.3.1( Dirt/Grease)	-	0	Parameter repeated.
4.3.2 (Damaged/Bumped Fibres)	-	0	Parameter repeated.
4.3.3(Finish Oil Contamination)	-	0	Parameter repeated.
4.3.4(Texture Colour/Appearance)	-	0	Parameter repeated.
4.3.5(Fluorescent Oil)	-	0	Parameter repeated.
4.3.6(Slubs/Loops/Kinks)	-	0	Parameter repeated.
4.3.7(None)	-	0	Parameter repeated.
Table -2 4.2(Additional Requirements for ECO-Mark (Optional))	-	0	Parameter repeated.
4.5(Commercial Mass)	-	0	Parameter repeated.
3.1(Oil Pickup Unit)	-	0	Parameter repeated.
3.2(Abnormal Fibre and Other Matters)	-	0	Parameter repeated.
4/4.1 Table 1.( REQUIREMENTS)	-	0	Parameter repeated.
4.3(Freedom from Defects)	-	0	Parameter repeated.
4.3.1( Dirt/Grease)	-	0	Parameter repeated.
4.3.2 (Damaged/Bumped Fibres)	-	0	Parameter repeated.
4.3.3(Finish Oil Contamination)	-	0	Parameter repeated.
4.3.4(Texture Colour/Appearance)	-	0	Parameter repeated.
4.3.5(Fluorescent Oil)	-	0	Parameter repeated.
4.3.6(Slubs/Loops/Kinks)	-	0	Parameter repeated.
4.3.7(None)	-	0	Parameter repeated.
Table -2 4.2(Additional Requirements for ECO-Mark (Optional))	-	0	Parameter repeated.
4.5(Commercial Mass)	-	0	Parameter repeated.
3.1(Oil Pickup Unit)	-	0	Parameter repeated.
3.2(Abnormal Fibre and Other Matters)	-	0	Parameter repeated.
4/4.1 Table 1.( REQUIREMENTS)	-	0	Parameter repeated.
4.3(Freedom from Defects)	-	0	Parameter repeated.
4.3.1( Dirt/Grease)	-	0	Parameter repeated.
4.3.2 (Damaged/Bumped Fibres)	-	0	Parameter repeated.
4.3.3(Finish Oil Contamination)	-	0	Parameter repeated.
4.3.4(Texture Colour/Appearance)	-	0	Parameter repeated.
4.3.5(Fluorescent Oil)	-	0	Parameter repeated.
4.3.6(Slubs/Loops/Kinks)	-	0	Parameter repeated.
4.3.7()	-	0	Parameter repeated.
Table -2 4.2(Additional Requirements for ECO-Mark (Optional))	-	0	Parameter repeated.
4.5(Commercial Mass)	-	0	Parameter repeated.
3.1(Oil Pickup Unit)	-	0	Parameter repeated.
3.2(Abnormal Fibre and Other Matters)	-	0	Parameter repeated.
4/4.1 Table 1.( REQUIREMENTS)	-	0	Parameter repeated.
4.3(Freedom from Defects)	-	0	Parameter repeated.
4.3.1( Dirt/Grease)	-	0	Parameter repeated.
4.3.2 (Damaged/Bumped Fibres)	-	0	Parameter repeated.
4.3.3(Finish Oil Contamination)	-	0	Parameter repeated.
4.3.4(Texture Colour/Appearance)	-	0	Parameter repeated.
4.3.5(Fluorescent Oil)	-	0	Parameter repeated.
4.3.6(Slubs/Loops/Kinks)	-	0	Parameter repeated.
4.3.7(None)	-	0	Parameter repeated.
Table -2 4.2(Additional Requirements for ECO-Mark (Optional))	-	0	Parameter repeated.
4.5(Commercial Mass)	-	0	Parameter repeated.
3.1(Oil Pickup Unit)	-	0	Parameter repeated.
3.2(Abnormal Fibre and Other Matters)	-	0	Parameter repeated.
4/4.1 Table 1.( REQUIREMENTS)	-	0	Parameter repeated.
4.3(Freedom from Defects)	-	0	Parameter repeated.
4.3.1( Dirt/Grease)	-	0	Parameter repeated.
4.3.2 (Damaged/Bumped Fibres)	-	0	Parameter repeated.
4.3.3(Finish Oil Contamination)	-	0	Parameter repeated.
4.3.4(Texture Colour/Appearance)	-	0	Parameter repeated.
4.3.5(Fluorescent Oil)	-	0	Parameter repeated.
4.3.6(Slubs/Loops/Kinks)	-	0	Parameter repeated.
4.3.7(None)	-	0	Parameter repeated.
Table -2 4.2(Additional Requirements for ECO-Mark (Optional))	-	0	Parameter repeated.
4.5(Commercial Mass)	-	0	Parameter repeated.
3.1(Oil Pickup Unit)	-	0	Parameter repeated.
3.2(Abnormal Fibre and Other Matters)	-	0	Parameter repeated.
4/4.1 Table 1.( REQUIREMENTS)	-	0	Parameter repeated.
4.3(Freedom from Defects)	-	0	Parameter repeated.
4.3.1( Dirt/Grease)	-	0	Parameter repeated.
4.3.2 (Damaged/Bumped Fibres)	-	0	Parameter repeated.
4.3.3(Finish Oil Contamination)	-	0	Parameter repeated.
4.3.4(Texture Colour/Appearance)	-	0	Parameter repeated.
4.3.5(Fluorescent Oil)	-	0	Parameter repeated.
4.3.6(Slubs/Loops/Kinks)	-	0	Parameter repeated.
4.3.7(None)	-	0	Parameter repeated.
Table -2 4.2(Additional Requirements for ECO-Mark (Optional))	-	0	Parameter repeated.
4.5(Commercial Mass)	-	0	Parameter repeated.
3.1(Oil Pickup Unit)	-	0	Parameter repeated.
3.2(Abnormal Fibre and Other Matters)	-	0	Parameter repeated.
4/4.1 Table 1.( REQUIREMENTS)	-	0	Parameter repeated.
4.3(Freedom from Defects)	-	0	Parameter repeated.
4.3.1( Dirt/Grease)	-	0	Parameter repeated.
4.3.2 (Damaged/Bumped Fibres)	-	0	Parameter repeated.
4.3.3(Finish Oil Contamination)	-	0	Parameter repeated.
4.3.4(Texture Colour/Appearance)	-	0	Parameter repeated.
4.3.5(Fluorescent Oil)	-	0	Parameter repeated.
4.3.6(Slubs/Loops/Kinks)	-	0	Parameter repeated.
4.3.7(None)	-	0	Parameter repeated.
Table -2 4.2(Additional Requirements for ECO-Mark (Optional))	-	0	Parameter repeated.

-
-

10656

INDIAN TESTING LABORATORY PRIVATE LIMITED, GREATER NOIDA

8171306

IS 2347 (2023)

DOMESTIC PRESSURE COOKER ï¿½ SPECIFICATION

GROUP I , II and III

32500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Gross capacity)	-	1500	-
4.2(Body Capacity)	-	1500	-
5.1(Body, Lid, Containers and Grid)	-	1500	-
5.1.2(Body and Lid )	-	1500	-
5.1.3(Stainless steel pressure cooker)	-	2500	-
5.1.4(Aluminium cooker )	-	2500	-
5.2(Safety Relief Device)	-	1500	-
5.3(Gasket)	-	3500	-
5.4(Handles and Knobs)	-	5000	-
5.5(Pressure Regulating Device )	-	1000	-
5.6(Vent Seal Pin for Pressure Regulating Device )	-	1000	-
5.7(Vent Pipe )	-	1000	-
5.8(Vent Pipe Nut )	-	1000	-
5.1(Material of Rim )	-	1000	-
5.11(Visual Pressure Indicator)	-	1500	-
5.12(Gasket Release System)	-	1500	-
6(Construction)	-	2500	-
7(Workmanship and Finish )	-	1000	-
8.1(Air Pressure Test )	-	2500	-
8.2(Proof Pressure Test )	-	2500	-
8.3(Operating Test for Pressure Regulating Device )	-	2500	-
8.4(Test for Safety Relief Device )	-	2500	-
8.5(Bursting Pressure Test )	-	2500	-
8.6(Test for Removal of Lid under Pressure )	-	2500	-
8.8(Composite Cooker Base )	-	2500	-
8.9(Aluminium induction compatible Base )	-	2500	-
8.1(Handles of cooker )	-	2500	-
8.11(External Coating)	-	2500	-
8.12(Internal Coating )	-	2500	-
8.13(Integral electrical heating)	-	3500	-
8.14(Ply construction cooker Body )	-	3500	-
8.15.1(Fragmentation Test )	-	700	-
8.15.2(Ball Drop Test )	-	700	-
8.15.3(Thermal Shock Test )	-	1000	-
8.15.4(Free Fall Test)	-	1000	-
8.17(Test for Effectiveness for Induction Bottom)	-	1000	-
11(Marking )	-	100	-

15 Aug, 2028

-
Revised version of IS 2347:2023 included w.e.f. 08.01.2024 Exclusion: Cl.5.9 (Spring ), Cl.8.7 (Test for Spring Loaded Mechanism ), Cl.12 (Packing )

10657

BIS, Central Laboratory (CL)

None

IS 1069 (2021)

QUALITY TOLERANCES FOR WATER FOR STORAGE BATTERIES - SPECIFICATION

900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2 , Table - 1 , i) (pH)	-
3 (Descripiton)	-

-
Excluding Cl 4.Table 1.ii) Specific Electrical Conductivity

10658

BIS, Central Laboratory (CL)

None

IS 2785 (2022)

CHEESE - SPECIFICATION (Second Revision of IS 2785)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.2.1 (Appearance - IS 2785 :2022)	-
5.2.3 (Texture and Consistency)	-
3 and 5.3 Table 1 (i) (e) Harvati 30 percent (Milk fat (On dry basis) IS 12758-2005)	-
5.4 Table 2-i (Coliform-IS 5401(P-1):2012)	-
5.4 Table 2-ii (S.aureus-IS 5887(P-8/Sec-1):2002)	-
5.4 Table 2-iii (Yeast & Mould count-IS 5403:1999)	-
5.4 Table 2-iv (E.coli-IS 5887(P-1):1976)	-
5.4 Table 2-v (Salmonella spp.-IS 5887(P-3/Sec-1):2020)	-
5.4 Table 2-vi (L.monocytogenes-IS 14988(P-1):2020)	-
5.5 Table 3-i (Aerobic Colony count - IS 5402 (Part 2))	-
5.5 Table 3-ii (Coliform-IS 5401(P-1):2012)	-
5.5 Table 3-iii (S.aureus-IS 5887(P-8/Sec-1):2002)	-
5.5 Table 3-iv (E.coli-IS 5887(P-1):1976)	-
5.5 Table 3-v (Salmonella spp.-IS 5887(P-3/Sec-1):2020)	-
5.5 Table 3-vi (L.monocytogenes-IS 14988(P-1):2020)	-
3 and 5.3 Table 1 (i) © Semi Soft chesse (Moisture IS- 2785-2022)	-

-
500 gm x 3 Excluding 1-Lactose

10659

KC INDIA TEST LABORATORIES LLP, GHAZIABAD

9140406

IS 16246 (2015)

Elastomer insulated cables with limited circuit integrity when affected by fire - Specification

Size: 1-400 sqmm

75000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4.1( Cables for Fixed Installation)	-	200	-
Cl.5( INSULATION)	-	200	-
Cl. 6.1( Glass Tape)	-	200	-
Cl 6.2( Polyethylene Teraphthalate (PETP) or Polypropylene base Tape)	-	200	-
Cl 6.4( Fire Barrier Tape)	-	200	-
Cl 7(CENTRE AND FILLERS)	-	200	-
Cl 7(CENTRE AND FILLERS)	-	200	-
Cl 7(CENTRE AND FILLERS)	-	200	-
Cl 7(CENTRE AND FILLERS)	-	200	-
Cl 8( ARMOUR)	-	200	-
Cl 9.1( Inner Sheath)	-	200	-
Cl 9.2( Outer Sheath)	-	200	-
Cl 10.1( CONDUCTORS)	-	200	-
Cl 10.2( CONDUCTORS)	-	200	-
Cl 11.1( INSULATION)	-	200	-
Cl 11.2(Thickness of Insulation IS 10810 : Part 6)	-	1000	-
Cl 12( CORE IDENTIFICATION)	-	200	-
Cl 13( LAYING UP OF CORES)	-	200	-
Cl 14.2( Thickness of Inner Sheath IS 10810 : Part 6)	-	1000	-
Cl 15.1( ARMOURING)	-	200	-
Cl 15.3.1( Type of Armour)	-	200	-
Cl 15.3.2( Type of Armour)	-	200	-
Cl 15.3.3( ARMOURING)	-	200	-
Cl 15.3.3( ARMOURING)	-	200	-
Cl 15.4.1( ARMOURING)	-	200	-
Cl 15.4.2( ARMOURING)	-	200	-
Cl 15.4.2( ARMOURING)	-	200	-
Cl 15.4.2( ARMOURING)	-	200	-
Cl 15.4.2( ARMOURING)	-	200	-
Cl 15.4.2( ARMOURING)	-	200	-
Cl 15.4.2( ARMOURING)	-	200	-
Cl 15.4.2( ARMOURING)	-	200	-
Cl 16.2( OUTER SHEATH)	-	200	-
Cl 16.3( Thickness of Outer Sheath - Avg IS 10810 : Part 6)	-	1000	-
Cl 16.3( Thickness of Outer Sheath - Minimum IS 10810 : Part 6)	-	1000	-
Cl 17.2(Annealing test (for copper) IS 10810 : Part 1)	-	1000	-
Cl 17.2(Conductor resistance test IS 10810 : Part 5)	-	2000	-
Cl 17.1(Persulphate test (tinned copper conductor) IS 10810 : Part 4)	-	2000	-
Cl 17.2(Tensile strength before ageing on insulation IS 10810 : Part 7)	-	2000	-
Cl 17.2(elongation at break before ageing on insulation IS 10810 : Part 7)	-	2000	-
Cl 17.2(Tensile strength after Ageing in air bomb IS 10810 : Part 56)	-	2000	-
Cl 17.2(Elongation after Ageing in air bomb IS 10810 : Part 56)	-	2000	-
Cl 17.2(Tensile strength variation)	-	2000	-
Cl 17.2(Elongation Variation)	-	2000	-
Cl 17.2(Hot set elongation on insulation IS 10810 : Part 30)	-	2000	-
Cl 17.2(Permanent elongation (set) on insulation IS 10810 : Part 30)	-	2000	-
Cl 17.1(Tensile strength before ageing on sheath IS 10810 : Part 7)	-	2000	-
Cl 17.1(elongation at break before ageing on sheath IS 10810 : Part 7)	-	2000	-
Cl 17.1(Hot set elongation test on sheath IS 10810 : Part 30)	-	2000	-
Cl 17.1(Permanent elongation (set) test on sheath IS 10810 : Part 30)	-	2000	-
Cl 17.1(Oxygen index test on sheath IS 10810 : Part 58)	-	2000	-
Cl 17.1(Temperature index test on sheath IS 10810 : Part 64)	-	2000	-
Cl 17.1(Acid gas generation on sheath IS 10810 : Part 39)	-	2000	-
Cl 17.2(Insulation resistance test IS 10810 : Part 43)	-	2000	-
Cl 17.1(Water absorption test (for insulation) IS 10810 : Part 28)	-	2000	-
Cl 18.2(High Voltage Test IS 10810 : Part 45)	-	2000	-
Cl 18.2(High Voltage Test IS 10810 : Part 45)	-	2000	-
Cl 18.3 Annex B of IS 16246( Circuit Integrity Test Under Fire Condition)	-	10000	-
Cl 18.3 Annex B of IS 16246( Circuit Integrity Test Under Fire Condition)	-	10000	-
Cl 18.4.1( Flame Retardence Test on Single Cable IS 10810 : Part 61)	-	8000	-
Cl 18.4.2(Flame Retardence Test on Bunched Cables IS 10810 : Part 63)	-	8000	-
Cl 19.1( Manufacturer’s Identification)	-	200	-
Cl 19.2( Voltage Identification)	-	200	-
Cl 19.3( Cable Identification)	-	200	-
Cl 19.4( Cable Code)	-	200	-

06 Jun, 2027

-
Included w.e.f. 02.01.2024 Size: 1 to 400 sqmm

10660

Amit Test and Calibration Centre (8172006)

8172006

IS 17293 (2020)

Electric Cables for Photovoltaic Systems for Rated Voltage 1 500 V d.c.

1050000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 7.3, Table 1 to 5 of IS 8130:2013 & IS:10810 (Part 5)-1984(Conductor Resistance Test)	-	3500	-
Cl. 7.1.2 of IS 8130 : 2013 & IS:10810 (Part 1)-1984(Annealing Test (for copper))	-	1000	-
Cl. 7.1.1 of IS 8130:2013 & IS:10810 (Part 4)-1984(Persulphate Test for tinned copper)	-	1500	-
Annex G and Table 3 of IS 17293:2020(Ozone Resistance test)	-	50000	-
IS 191 : 2007, IS 440(Copper purity test)	-	3500	-
Table 3 of IS 17293:2020 & IS 10810 (Part 63)(Smoke density test.)	-	145000	-
Cl 6.4.3 and Table 3 of IS 8130(Diameter of wire in conductor)	-	100	-
Table-3 & Annex-F of IS 17293:2020 and IS 10810 (Part 7) 1984(Elongation at low temperature (Cold Elongation))	-	7000	-
Annex H and Table 3 of IS 17293:2020(Damp Heat test)	-	35000	-
Cl. 5.3, 6.3 & Table 1 & 2 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	1000	-
Annex A of IS 17293-2020, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	7000	-
Cl 11.2.3 & Table-3 of IS 17293:2020 & IS:10810 (Part 43)-1984(Insulation Resistance)	-	5000	-
Annex B of IS 17293:2020 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	7000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(pH)	-	7000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(IS 17293)	-	4500	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(HCl and HBr)	-	4500	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Presence of Fluorine / Fluorine Content (if required))	-	4500	-
Annex B of IS 17293:2020 & IS:10810 (Part 30)-1984(IS 10810-30)	-	2000	-
"Annex B of IS 17293:2020 & IS:8504-1:2012 and IS: 8504-2: 2013"(Thermal endurance test)	-	340000	-
Annex D and Table 3 of IS 17293:2020(Dynamic Penetration test)	-	70000	-
Annex- I, Annex-B, Table-11 of IS 17293:2020 and IS 10810 (Part 1) : 1984(Sheath resistance against acid and alkaline solution)	-	5000	-
Annex C of IS 17293:2020 & IS:10810 (Part 21)-1984(Cold impact test)	-	5000	-
Annex - B of IS 17293:2020(Compatibility test)	-	7000	-
Table 3 of IS 17293:2020 & IS:10810 (Part 20)-1984(Cold bend test)	-	5000	-
Cl. 5.3, 6.3 & Table 1 & 2 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	0	-
Cl 5.3 of IS 17048:2018 & IS:10810 (Part 53)-1984(Flammability Test)	-	1500	-
Annex A of IS 17293-2020, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	0	-
Cl 11.2.1 of IS 17293:2020 & IS:10810 (Part 45)-1984(High voltage test)	-	2500	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Presence of Fluorine / Fluorine Content (if required))	-	0	-
Annex B of IS 17293:2020 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(pH)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Conductivity)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(HCl and HBr)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Presence of Fluorine / Fluorine Content (if required))	-	0	-
Annex B of IS 17293:2020 & IS:10810 (Part 30)-1984(Hot set test)	-	0	-
"Annex B of IS 17293:2020 & IS:8504-1:2012 and IS: 8504-2: 2013"(Thermal endurance test)	-	340000	-
Annex- I, Annex-B, Table-11 of IS 17293:2020 and IS 10810 (Part 1) : 1984(Sheath resistance against acid and alkaline solution)	-	0	-
Annex - B of IS 17293:2020(Compatibility test)	-	0	-
Table 3 of IS 17293:2020 & IS:10810 (Part 12)-1984(Shrinkage test)	-	1500	-
Annex - E of IS 17293 : 2020(UV resistance)	-	45000	-
11.2.4(Long-term Resistance of Insulation to d.c.)	-	10000	-
11.2.5(Surface Resistance of Sheath)	-	3500	-
11.3.1(Sheath Colour)	-	1000	-
11.3.2(Sheath Marking)	-	1000	-
11.3.3(Overall Diameters and Ovality)	-	1000	-
Annex J(Assessment of Halogens)	-	0	-
5.1, 6.1, Table 11, 1.1(Properties before ageing b)	-	0	-
5.1, 6.1, Table 11, 1.2(Properties after ageing in oven)	-	0	-
5.1, 6.1, Table 11, 1.3(Hot set test b)	-	0	-
5.1, 6.1, Table 11, 1.4(Thermal endurance Test conditions b)	-	0	-
5.1, 6.1, Table 11, 1.5(Bending at low temperature)	-	0	-
5.1, 6.1, Table 11, 1.6(Elongation at low temperature Insulated conductor/cable overall diameter)	-	0	-
5.1, 6.1, Table 11, 1.7(Sheath resistance against acid and alkaline solution)	-	0	-
5.1, 6.1, Table 11, 1.8(Compatibility test)	-	0	-
5.2(Application to the Conductor)	-	500	-
5.3(Thickness)	-	1000	-
6.2(Sheath application)	-	500	-
6.3(Sheath Thickness)	-	1000	-
6.4(Sheath Colour)	-	1000	-
7(Overall Dimension)	-	1000	-
8.1(Continuity of Marking)	-	500	-
8.2(Durability)	-	500	-
9(Core Identification)	-	500	-
4.1(Resistance)	-	0	-
7.1.2.1, 7.2.3(Annealing)	-	0	-
Table 3, (IS 10810 Part 53)(Test for vertical flame propagation on complete cable)	-	0	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(pH)	-	0	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Conductivity)	-	0	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(HCl and HBr)	-	0	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Presence of Fluorine / Fluorine Content (if required))	-	0	-
11.2.2(Spark Test)	-	1500	-
12(Packing and Marking)	-	500	-
8.3(Legibility)	-	500	-
Cl. 7.3, Table 1 to 5 of IS 8130:2013 & IS:10810 (Part 5)-1984(Conductor Resistance Test)	-	3500	-
Cl. 7.1.2 of IS 8130 : 2013 & IS:10810 (Part 1)-1984(Annealing Test (for copper))	-	0	-
Cl. 7.1.1 of IS 8130:2013 & IS:10810 (Part 4)-1984(Persulphate Test for tinned copper)	-	0	-
Annex G and Table 3 of IS 17293:2020(Ozone Resistance test)	-	0	-
IS 191 : 2007, IS 440(Copper purity test)	-	0	-
Table 3 of IS 17293:2020 & IS 10810 (Part 63)(Smoke density test.)	-	0	-
Cl 6.4.3 and Table 3 of IS 8130(Diameter of wire in conductor)	-	0	-
Table-3 & Annex-F of IS 17293:2020 and IS 10810 (Part 7) 1984(Elongation at low temperature (Cold Elongation))	-	0	-
Annex H and Table 3 of IS 17293:2020(Damp Heat test)	-	0	-
Cl. 5.3, 6.3 & Table 1 & 2 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	0	-
Annex A of IS 17293-2020, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	0	-
Cl 11.2.3 & Table-3 of IS 17293:2020 & IS:10810 (Part 43)-1984(Insulation Resistance)	-	0	-
Annex B of IS 17293:2020 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(pH)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(IS 17293)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(HCl and HBr)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Presence of Fluorine / Fluorine Content (if required))	-	0	-
Annex B of IS 17293:2020 & IS:10810 (Part 30)-1984(IS 10810-30)	-	0	-
"Annex B of IS 17293:2020 & IS:8504-1:2012 and IS: 8504-2: 2013"(Thermal endurance test)	-	0	-
Annex D and Table 3 of IS 17293:2020(Dynamic Penetration test)	-	0	-
Annex- I, Annex-B, Table-11 of IS 17293:2020 and IS 10810 (Part 1) : 1984(Sheath resistance against acid and alkaline solution)	-	0	-
Annex C of IS 17293:2020 & IS:10810 (Part 21)-1984(Cold impact test)	-	0	-
Annex - B of IS 17293:2020(Compatibility test)	-	0	-
Table 3 of IS 17293:2020 & IS:10810 (Part 20)-1984(Cold bend test)	-	0	-
Cl. 5.3, 6.3 & Table 1 & 2 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	0	-
Cl 5.3 of IS 17048:2018 & IS:10810 (Part 53)-1984(Flammability Test)	-	0	-
Annex A of IS 17293-2020, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	0	-
Cl 11.2.1 of IS 17293:2020 & IS:10810 (Part 45)-1984(High voltage test)	-	5000	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Presence of Fluorine / Fluorine Content (if required))	-	0	-
Annex B of IS 17293:2020 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(pH)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Conductivity)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(HCl and HBr)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Presence of Fluorine / Fluorine Content (if required))	-	0	-
Annex B of IS 17293:2020 & IS:10810 (Part 30)-1984(Hot set test)	-	0	-
"Annex B of IS 17293:2020 & IS:8504-1:2012 and IS: 8504-2: 2013"(Thermal endurance test)	-	0	-
Annex- I, Annex-B, Table-11 of IS 17293:2020 and IS 10810 (Part 1) : 1984(Sheath resistance against acid and alkaline solution)	-	0	-
Annex - B of IS 17293:2020(Compatibility test)	-	0	-
Table 3 of IS 17293:2020 & IS:10810 (Part 12)-1984(Shrinkage test)	-	0	-
Annex - E of IS 17293 : 2020(UV resistance)	-	0	-
11.2.4(Long-term Resistance of Insulation to d.c.)	-	0	-
11.2.5(Surface Resistance of Sheath)	-	0	-
11.3.1(Sheath Colour)	-	0	-
11.3.2(Sheath Marking)	-	0	-
11.3.3(Overall Diameters and Ovality)	-	0	-
Annex J(Assessment of Halogens)	-	0	-
5.1, 6.1, Table 11, 1.1(Properties before ageing b)	-	0	-
5.1, 6.1, Table 11, 1.2(Properties after ageing in oven)	-	0	-
5.1, 6.1, Table 11, 1.3(Hot set test b)	-	0	-
5.1, 6.1, Table 11, 1.4(Thermal endurance Test conditions b)	-	0	-
5.1, 6.1, Table 11, 1.5(Bending at low temperature)	-	0	-
5.1, 6.1, Table 11, 1.6(Elongation at low temperature Insulated conductor/cable overall diameter)	-	7000	-
5.1, 6.1, Table 11, 1.7(Sheath resistance against acid and alkaline solution)	-	1000	-
5.1, 6.1, Table 11, 1.8(Compatibility test)	-	0	-
5.2(Application to the Conductor)	-	0	-
5.3(Thickness)	-	0	-
6.2(Sheath application)	-	0	-
6.3(Sheath Thickness)	-	1000	-
6.4(Sheath Colour)	-	1000	-
7(Overall Dimension)	-	1000	-
8.1(Continuity of Marking)	-	0	-
8.2(Durability)	-	0	-
9(Core Identification)	-	0	-
4.1(Resistance)	-	3500	-
7.1.2.1, 7.2.3(Annealing)	-	2000	-
Table 3, (IS 10810 Part 53)(Test for vertical flame propagation on complete cable)	-	5000	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(pH)	-	0	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Conductivity)	-	0	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(HCl and HBr)	-	0	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Presence of Fluorine / Fluorine Content (if required))	-	0	-
11.2.2(Spark Test)	-	0	-
12(Packing and Marking)	-	0	-
8.3(Legibility)	-	0	-
Cl. 7.3, Table 1 to 5 of IS 8130:2013 & IS:10810 (Part 5)-1984(Conductor Resistance Test)	-	0	-
Cl. 7.1.2 of IS 8130 : 2013 & IS:10810 (Part 1)-1984(Annealing Test (for copper))	-	0	-
Cl. 7.1.1 of IS 8130:2013 & IS:10810 (Part 4)-1984(Persulphate Test for tinned copper)	-	0	-
Annex G and Table 3 of IS 17293:2020(Ozone Resistance test)	-	0	-
IS 191 : 2007, IS 440(Copper purity test)	-	0	-
Table 3 of IS 17293:2020 & IS 10810 (Part 63)(Smoke density test.)	-	0	-
Cl 6.4.3 and Table 3 of IS 8130(Diameter of wire in conductor)	-	0	-
Table-3 & Annex-F of IS 17293:2020 and IS 10810 (Part 7) 1984(Elongation at low temperature (Cold Elongation))	-	0	-
Annex H and Table 3 of IS 17293:2020(Damp Heat test)	-	0	-
Cl. 5.3, 6.3 & Table 1 & 2 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	0	-
Annex A of IS 17293-2020, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	0	-
Cl 11.2.3 & Table-3 of IS 17293:2020 & IS:10810 (Part 43)-1984(Insulation Resistance)	-	0	-
Annex B of IS 17293:2020 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(pH)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(IS 17293)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(HCl and HBr)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Presence of Fluorine / Fluorine Content (if required))	-	0	-
Annex B of IS 17293:2020 & IS:10810 (Part 30)-1984(IS 10810-30)	-	0	-
"Annex B of IS 17293:2020 & IS:8504-1:2012 and IS: 8504-2: 2013"(Thermal endurance test)	-	0	-
Annex D and Table 3 of IS 17293:2020(Dynamic Penetration test)	-	0	-
Annex- I, Annex-B, Table-11 of IS 17293:2020 and IS 10810 (Part 1) : 1984(Sheath resistance against acid and alkaline solution)	-	0	-
Annex C of IS 17293:2020 & IS:10810 (Part 21)-1984(Cold impact test)	-	0	-
Annex - B of IS 17293:2020(Compatibility test)	-	0	-
Table 3 of IS 17293:2020 & IS:10810 (Part 20)-1984(Cold bend test)	-	0	-
Cl. 5.3, 6.3 & Table 1 & 2 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	0	-
Cl 5.3 of IS 17048:2018 & IS:10810 (Part 53)-1984(Flammability Test)	-	0	-
Annex A of IS 17293-2020, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	0	-
Cl 11.2.1 of IS 17293:2020 & IS:10810 (Part 45)-1984(High voltage test)	-	0	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Presence of Fluorine / Fluorine Content (if required))	-	0	-
Annex B of IS 17293:2020 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(pH)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Conductivity)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(HCl and HBr)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Presence of Fluorine / Fluorine Content (if required))	-	0	-
Annex B of IS 17293:2020 & IS:10810 (Part 30)-1984(Hot set test)	-	0	-
"Annex B of IS 17293:2020 & IS:8504-1:2012 and IS: 8504-2: 2013"(Thermal endurance test)	-	0	-
Annex- I, Annex-B, Table-11 of IS 17293:2020 and IS 10810 (Part 1) : 1984(Sheath resistance against acid and alkaline solution)	-	0	-
Annex - B of IS 17293:2020(Compatibility test)	-	0	-
Table 3 of IS 17293:2020 & IS:10810 (Part 12)-1984(Shrinkage test)	-	0	-
Annex - E of IS 17293 : 2020(UV resistance)	-	0	-
11.2.4(Long-term Resistance of Insulation to d.c.)	-	0	-
11.2.5(Surface Resistance of Sheath)	-	0	-
11.3.1(Sheath Colour)	-	0	-
11.3.2(Sheath Marking)	-	0	-
11.3.3(Overall Diameters and Ovality)	-	0	-
Annex J(Assessment of Halogens)	-	0	-
5.1, 6.1, Table 11, 1.1(Properties before ageing b)	-	0	-
5.1, 6.1, Table 11, 1.2(Properties after ageing in oven)	-	0	-
5.1, 6.1, Table 11, 1.3(Hot set test b)	-	0	-
5.1, 6.1, Table 11, 1.4(Thermal endurance Test conditions b)	-	0	-
5.1, 6.1, Table 11, 1.5(Bending at low temperature)	-	0	-
5.1, 6.1, Table 11, 1.6(Elongation at low temperature Insulated conductor/cable overall diameter)	-	0	-
5.1, 6.1, Table 11, 1.7(Sheath resistance against acid and alkaline solution)	-	0	-
5.1, 6.1, Table 11, 1.8(Compatibility test)	-	0	-
5.2(Application to the Conductor)	-	0	-
5.3(Thickness)	-	0	-
6.2(Sheath application)	-	0	-
6.3(Sheath Thickness)	-	0	-
6.4(Sheath Colour)	-	0	-
7(Overall Dimension)	-	0	-
8.1(Continuity of Marking)	-	0	-
8.2(Durability)	-	0	-
9(Core Identification)	-	0	-
4.1(Resistance)	-	0	-
7.1.2.1, 7.2.3(Annealing)	-	0	-
Table 3, (IS 10810 Part 53)(Test for vertical flame propagation on complete cable)	-	0	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(pH)	-	0	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Conductivity)	-	0	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(HCl and HBr)	-	0	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Presence of Fluorine / Fluorine Content (if required))	-	0	-
11.2.2(Spark Test)	-	0	-
12(Packing and Marking)	-	0	-
8.3(Legibility)	-	0	-
Cl. 7.3, Table 1 to 5 of IS 8130:2013 & IS:10810 (Part 5)-1984(Conductor Resistance Test)	-	0	-
Cl. 7.1.2 of IS 8130 : 2013 & IS:10810 (Part 1)-1984(Annealing Test (for copper))	-	0	-
Cl. 7.1.1 of IS 8130:2013 & IS:10810 (Part 4)-1984(Persulphate Test for tinned copper)	-	0	-
Annex G and Table 3 of IS 17293:2020(Ozone Resistance test)	-	0	-
IS 191 : 2007, IS 440(Copper purity test)	-	0	-
Table 3 of IS 17293:2020 & IS 10810 (Part 63)(Smoke density test.)	-	0	-
Cl 6.4.3 and Table 3 of IS 8130(Diameter of wire in conductor)	-	0	-
Table-3 & Annex-F of IS 17293:2020 and IS 10810 (Part 7) 1984(Elongation at low temperature (Cold Elongation))	-	0	-
Annex H and Table 3 of IS 17293:2020(Damp Heat test)	-	0	-
Cl. 5.3, 6.3 & Table 1 & 2 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	0	-
Annex A of IS 17293-2020, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	0	-
Cl 11.2.3 & Table-3 of IS 17293:2020 & IS:10810 (Part 43)-1984(Insulation Resistance)	-	0	-
Annex B of IS 17293:2020 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(pH)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(IS 17293)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(HCl and HBr)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Presence of Fluorine / Fluorine Content (if required))	-	0	-
Annex B of IS 17293:2020 & IS:10810 (Part 30)-1984(IS 10810-30)	-	0	-
"Annex B of IS 17293:2020 & IS:8504-1:2012 and IS: 8504-2: 2013"(Thermal endurance test)	-	0	-
Annex D and Table 3 of IS 17293:2020(Dynamic Penetration test)	-	0	-
Annex- I, Annex-B, Table-11 of IS 17293:2020 and IS 10810 (Part 1) : 1984(Sheath resistance against acid and alkaline solution)	-	0	-
Annex C of IS 17293:2020 & IS:10810 (Part 21)-1984(Cold impact test)	-	0	-
Annex - B of IS 17293:2020(Compatibility test)	-	0	-
Table 3 of IS 17293:2020 & IS:10810 (Part 20)-1984(Cold bend test)	-	0	-
Cl. 5.3, 6.3 & Table 1 & 2 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	0	-
Cl 5.3 of IS 17048:2018 & IS:10810 (Part 53)-1984(Flammability Test)	-	0	-
Annex A of IS 17293-2020, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	0	-
Cl 11.2.1 of IS 17293:2020 & IS:10810 (Part 45)-1984(High voltage test)	-	0	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Presence of Fluorine / Fluorine Content (if required))	-	0	-
Annex B of IS 17293:2020 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(pH)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Conductivity)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(HCl and HBr)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Presence of Fluorine / Fluorine Content (if required))	-	0	-
Annex B of IS 17293:2020 & IS:10810 (Part 30)-1984(Hot set test)	-	0	-
"Annex B of IS 17293:2020 & IS:8504-1:2012 and IS: 8504-2: 2013"(Thermal endurance test)	-	0	-
Annex- I, Annex-B, Table-11 of IS 17293:2020 and IS 10810 (Part 1) : 1984(Sheath resistance against acid and alkaline solution)	-	0	-
Annex - B of IS 17293:2020(Compatibility test)	-	0	-
Table 3 of IS 17293:2020 & IS:10810 (Part 12)-1984(Shrinkage test)	-	0	-
Annex - E of IS 17293 : 2020(UV resistance)	-	0	-
11.2.4(Long-term Resistance of Insulation to d.c.)	-	0	-
11.2.5(Surface Resistance of Sheath)	-	0	-
11.3.1(Sheath Colour)	-	0	-
11.3.2(Sheath Marking)	-	0	-
11.3.3(Overall Diameters and Ovality)	-	0	-
Annex J(Assessment of Halogens)	-	0	-
5.1, 6.1, Table 11, 1.1(Properties before ageing b)	-	0	-
5.1, 6.1, Table 11, 1.2(Properties after ageing in oven)	-	0	-
5.1, 6.1, Table 11, 1.3(Hot set test b)	-	0	-
5.1, 6.1, Table 11, 1.4(Thermal endurance Test conditions b)	-	0	-
5.1, 6.1, Table 11, 1.5(Bending at low temperature)	-	0	-
5.1, 6.1, Table 11, 1.6(Elongation at low temperature Insulated conductor/cable overall diameter)	-	0	-
5.1, 6.1, Table 11, 1.7(Sheath resistance against acid and alkaline solution)	-	0	-
5.1, 6.1, Table 11, 1.8(Compatibility test)	-	0	-
5.2(Application to the Conductor)	-	0	-
5.3(Thickness)	-	0	-
6.2(Sheath application)	-	0	-
6.3(Sheath Thickness)	-	0	-
6.4(Sheath Colour)	-	0	-
7(Overall Dimension)	-	0	-
8.1(Continuity of Marking)	-	0	-
8.2(Durability)	-	0	-
9(Core Identification)	-	0	-
4.1(Resistance)	-	0	-
7.1.2.1, 7.2.3(Annealing)	-	0	-
Table 3, (IS 10810 Part 53)(Test for vertical flame propagation on complete cable)	-	0	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(pH)	-	0	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Conductivity)	-	0	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(HCl and HBr)	-	0	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Presence of Fluorine / Fluorine Content (if required))	-	0	-
11.2.2(Spark Test)	-	0	-
12(Packing and Marking)	-	0	-
8.3(Legibility)	-	0	-
Cl. 7.3, Table 1 to 5 of IS 8130:2013 & IS:10810 (Part 5)-1984(Conductor Resistance Test)	-	0	-
Cl. 7.1.2 of IS 8130 : 2013 & IS:10810 (Part 1)-1984(Annealing Test (for copper))	-	0	-
Cl. 7.1.1 of IS 8130:2013 & IS:10810 (Part 4)-1984(Persulphate Test for tinned copper)	-	0	-
Annex G and Table 3 of IS 17293:2020(Ozone Resistance test)	-	0	-
IS 191 : 2007, IS 440(Copper purity test)	-	0	-
Table 3 of IS 17293:2020 & IS 10810 (Part 63)(Smoke density test.)	-	0	-
Cl 6.4.3 and Table 3 of IS 8130(Diameter of wire in conductor)	-	0	-
Table-3 & Annex-F of IS 17293:2020 and IS 10810 (Part 7) 1984(Elongation at low temperature (Cold Elongation))	-	0	-
Annex H and Table 3 of IS 17293:2020(Damp Heat test)	-	0	-
Cl. 5.3, 6.3 & Table 1 & 2 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	0	-
Annex A of IS 17293-2020, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	0	-
Cl 11.2.3 & Table-3 of IS 17293:2020 & IS:10810 (Part 43)-1984(Insulation Resistance)	-	0	-
Annex B of IS 17293:2020 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(pH)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(IS 17293)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(HCl and HBr)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Presence of Fluorine / Fluorine Content (if required))	-	0	-
Annex B of IS 17293:2020 & IS:10810 (Part 30)-1984(IS 10810-30)	-	0	-
"Annex B of IS 17293:2020 & IS:8504-1:2012 and IS: 8504-2: 2013"(Thermal endurance test)	-	0	-
Annex D and Table 3 of IS 17293:2020(Dynamic Penetration test)	-	0	-
Annex- I, Annex-B, Table-11 of IS 17293:2020 and IS 10810 (Part 1) : 1984(Sheath resistance against acid and alkaline solution)	-	0	-
Annex C of IS 17293:2020 & IS:10810 (Part 21)-1984(Cold impact test)	-	0	-
Annex - B of IS 17293:2020(Compatibility test)	-	0	-
Table 3 of IS 17293:2020 & IS:10810 (Part 20)-1984(Cold bend test)	-	0	-
Cl. 5.3, 6.3 & Table 1 & 2 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	0	-
Cl 5.3 of IS 17048:2018 & IS:10810 (Part 53)-1984(Flammability Test)	-	0	-
Annex A of IS 17293-2020, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	0	-
Cl 11.2.1 of IS 17293:2020 & IS:10810 (Part 45)-1984(High voltage test)	-	0	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Presence of Fluorine / Fluorine Content (if required))	-	0	-
Annex B of IS 17293:2020 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(pH)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Conductivity)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(HCl and HBr)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Presence of Fluorine / Fluorine Content (if required))	-	0	-
Annex B of IS 17293:2020 & IS:10810 (Part 30)-1984(Hot set test)	-	0	-
"Annex B of IS 17293:2020 & IS:8504-1:2012 and IS: 8504-2: 2013"(Thermal endurance test)	-	0	-
Annex- I, Annex-B, Table-11 of IS 17293:2020 and IS 10810 (Part 1) : 1984(Sheath resistance against acid and alkaline solution)	-	0	-
Annex - B of IS 17293:2020(Compatibility test)	-	0	-
Table 3 of IS 17293:2020 & IS:10810 (Part 12)-1984(Shrinkage test)	-	0	-
Annex - E of IS 17293 : 2020(UV resistance)	-	0	-
11.2.4(Long-term Resistance of Insulation to d.c.)	-	0	-
11.2.5(Surface Resistance of Sheath)	-	0	-
11.3.1(Sheath Colour)	-	0	-
11.3.2(Sheath Marking)	-	0	-
11.3.3(Overall Diameters and Ovality)	-	0	-
Annex J(Assessment of Halogens)	-	0	-
5.1, 6.1, Table 11, 1.1(Properties before ageing b)	-	0	-
5.1, 6.1, Table 11, 1.2(Properties after ageing in oven)	-	0	-
5.1, 6.1, Table 11, 1.3(Hot set test b)	-	0	-
5.1, 6.1, Table 11, 1.4(Thermal endurance Test conditions b)	-	0	-
5.1, 6.1, Table 11, 1.5(Bending at low temperature)	-	0	-
5.1, 6.1, Table 11, 1.6(Elongation at low temperature Insulated conductor/cable overall diameter)	-	0	-
5.1, 6.1, Table 11, 1.7(Sheath resistance against acid and alkaline solution)	-	0	-
5.1, 6.1, Table 11, 1.8(Compatibility test)	-	0	-
5.2(Application to the Conductor)	-	0	-
5.3(Thickness)	-	0	-
6.2(Sheath application)	-	0	-
6.3(Sheath Thickness)	-	0	-
6.4(Sheath Colour)	-	0	-
7(Overall Dimension)	-	0	-
8.1(Continuity of Marking)	-	0	-
8.2(Durability)	-	0	-
9(Core Identification)	-	0	-
4.1(Resistance)	-	0	-
7.1.2.1, 7.2.3(Annealing)	-	0	-
Table 3, (IS 10810 Part 53)(Test for vertical flame propagation on complete cable)	-	0	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(pH)	-	0	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Conductivity)	-	0	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(HCl and HBr)	-	0	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Presence of Fluorine / Fluorine Content (if required))	-	0	-
11.2.2(Spark Test)	-	0	-
12(Packing and Marking)	-	0	-
8.3(Legibility)	-	0	-
Cl. 7.3, Table 1 to 5 of IS 8130:2013 & IS:10810 (Part 5)-1984(Conductor Resistance Test)	-	0	-
Cl. 7.1.2 of IS 8130 : 2013 & IS:10810 (Part 1)-1984(Annealing Test (for copper))	-	0	-
Cl. 7.1.1 of IS 8130:2013 & IS:10810 (Part 4)-1984(Persulphate Test for tinned copper)	-	0	-
Annex G and Table 3 of IS 17293:2020(Ozone Resistance test)	-	0	-
IS 191 : 2007, IS 440(Copper purity test)	-	0	-
Table 3 of IS 17293:2020 & IS 10810 (Part 63)(Smoke density test.)	-	0	-
Cl 6.4.3 and Table 3 of IS 8130(Diameter of wire in conductor)	-	0	-
Table-3 & Annex-F of IS 17293:2020 and IS 10810 (Part 7) 1984(Elongation at low temperature (Cold Elongation))	-	0	-
Annex H and Table 3 of IS 17293:2020(Damp Heat test)	-	0	-
Cl. 5.3, 6.3 & Table 1 & 2 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	0	-
Annex A of IS 17293-2020, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	0	-
Cl 11.2.3 & Table-3 of IS 17293:2020 & IS:10810 (Part 43)-1984(Insulation Resistance)	-	0	-
Annex B of IS 17293:2020 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(pH)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(IS 17293)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(HCl and HBr)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Presence of Fluorine / Fluorine Content (if required))	-	0	-
Annex B of IS 17293:2020 & IS:10810 (Part 30)-1984(IS 10810-30)	-	0	-
"Annex B of IS 17293:2020 & IS:8504-1:2012 and IS: 8504-2: 2013"(Thermal endurance test)	-	0	-
Annex D and Table 3 of IS 17293:2020(Dynamic Penetration test)	-	0	-
Annex- I, Annex-B, Table-11 of IS 17293:2020 and IS 10810 (Part 1) : 1984(Sheath resistance against acid and alkaline solution)	-	0	-
Annex C of IS 17293:2020 & IS:10810 (Part 21)-1984(Cold impact test)	-	0	-
Annex - B of IS 17293:2020(Compatibility test)	-	0	-
Table 3 of IS 17293:2020 & IS:10810 (Part 20)-1984(Cold bend test)	-	0	-
Cl. 5.3, 6.3 & Table 1 & 2 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	0	-
Cl 5.3 of IS 17048:2018 & IS:10810 (Part 53)-1984(Flammability Test)	-	0	-
Annex A of IS 17293-2020, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	0	-
Cl 11.2.1 of IS 17293:2020 & IS:10810 (Part 45)-1984(High voltage test)	-	0	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Presence of Fluorine / Fluorine Content (if required))	-	0	-
Annex B of IS 17293:2020 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(pH)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Conductivity)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(HCl and HBr)	-	0	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Presence of Fluorine / Fluorine Content (if required))	-	0	-
Annex B of IS 17293:2020 & IS:10810 (Part 30)-1984(Hot set test)	-	0	-
"Annex B of IS 17293:2020 & IS:8504-1:2012 and IS: 8504-2: 2013"(Thermal endurance test)	-	0	-
Annex- I, Annex-B, Table-11 of IS 17293:2020 and IS 10810 (Part 1) : 1984(Sheath resistance against acid and alkaline solution)	-	0	-
Annex - B of IS 17293:2020(Compatibility test)	-	0	-
Table 3 of IS 17293:2020 & IS:10810 (Part 12)-1984(Shrinkage test)	-	0	-
Annex - E of IS 17293 : 2020(UV resistance)	-	0	-
11.2.4(Long-term Resistance of Insulation to d.c.)	-	0	-
11.2.5(Surface Resistance of Sheath)	-	0	-
11.3.1(Sheath Colour)	-	0	-
11.3.2(Sheath Marking)	-	0	-
11.3.3(Overall Diameters and Ovality)	-	0	-
Annex J(Assessment of Halogens)	-	0	-
5.1, 6.1, Table 11, 1.1(Properties before ageing b)	-	0	-
5.1, 6.1, Table 11, 1.2(Properties after ageing in oven)	-	0	-
5.1, 6.1, Table 11, 1.3(Hot set test b)	-	0	-
5.1, 6.1, Table 11, 1.4(Thermal endurance Test conditions b)	-	0	-
5.1, 6.1, Table 11, 1.5(Bending at low temperature)	-	0	-
5.1, 6.1, Table 11, 1.6(Elongation at low temperature Insulated conductor/cable overall diameter)	-	0	-
5.1, 6.1, Table 11, 1.7(Sheath resistance against acid and alkaline solution)	-	0	-
5.1, 6.1, Table 11, 1.8(Compatibility test)	-	0	-
5.2(Application to the Conductor)	-	0	-
5.3(Thickness)	-	0	-
6.2(Sheath application)	-	0	-
6.3(Sheath Thickness)	-	0	-
6.4(Sheath Colour)	-	0	-
7(Overall Dimension)	-	0	-
8.1(Continuity of Marking)	-	0	-
8.2(Durability)	-	0	-
9(Core Identification)	-	0	-
4.1(Resistance)	-	0	-
7.1.2.1, 7.2.3(Annealing)	-	0	-
Table 3, (IS 10810 Part 53)(Test for vertical flame propagation on complete cable)	-	0	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(pH)	-	0	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Conductivity)	-	0	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(HCl and HBr)	-	0	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Presence of Fluorine / Fluorine Content (if required))	-	0	-
11.2.2(Spark Test)	-	0	-
12(Packing and Marking)	-	0	-
8.3(Legibility)	-	0	-

16 Apr, 2029

-
Included w.e.f. 28.03.2024

10661

SHRIRAM FOOD AND PHARMA RESEARCH CENTRE, GHAZIABAD

9179606

IS 170 (2020)

Acetone — Specification ( Fifth Revision )

11000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl No 3.1( Description)	-	100	-
Cl No 3.2(Miscibility with Water)	-	500	-
Cl 3.3 and 6.1 ANNEX A [ Table 1, Sl No. (i) ](Purity)	-	3000	-
Cl 3.3 and 6.1 [ Table 1, Sl No. (ii) ] ref to IS 8768(Colour)	-	1000	-
Cl 3.3 and 6.1 [ Table 1, Sl No. (iii) ] ref to 6 of IS 82(Relative density, at 27/27 °C)	-	500	-
Cl 3.3 and 6.1 [ Table 1, Sl No. (iv) ] IS 1448 (Part 18) with the thermometer containing to the requirements given to Annex B(*Distillation range)	-	2000	-
Cl 3.3 and 6.1 [ Table 1, Sl No. (v) ] ref to IS 2362(Water content)	-	1000	-
Cl 3.3 and 6.1 [ Table 1, Sl No. (vi) ] ref to 8 of IS 82(Residue on evaporation)	-	500	-
Cl 3.3 and 6.1 ANNEX C [ Table 1, Sl No. (vii) ](Acidity (as CH3COOH),)	-	500	-
Cl 3.3 and 6.1 ANNEX D [ Table 1, Sl No. (viii) ](Alkalinity)	-	500	-
Cl 3.3 and 6.1 ANNEX E [ Table 1, Sl No. (ix) ](Permanganate test)	-	500	-
Cl 3.3 and 6.1 ANNEX F [ Table 1, Sl No. (x) ](Alcoholic impurities)	-	500	-
Cl 3.3 and 6.1 ANNEX A [ Table 1, Sl No. (xi) ](Benzene content)	-	1000	-
Cl 3.3 and 6.1 ANNEX A [ Table 1, Sl No. (xii) ](Methanol content)	-	1000	-
3.1(Description)	-	100	-
3.2(Miscibility with Water)	-	500	-
4.1(Packing)	-	100	-
4.2(Marking)	-	100	-
3.3 & 6.1 - Table -1, Sl no. 1(Purity %, Annex A)	-	3000	-
3.3 & 6.1 - Table -1, Sl no. 2(Colour, Pt-Co scale, IS 8768)	-	1000	-
3.3 & 6.1 - Table -1, Sl no. 3(Relative density, 6 of IS 82)	-	500	-
3.3 & 6.1 - Table -1, Sl no. 4(Distillation range, IS 1448-Part 18)	-	2000	-
3.3 & 6.1 - Table -1, Sl no. 5(Water content, %, IS 2362)	-	1000	-
3.3 & 6.1 - Table -1, Sl no. 6(Residue on evaporation, mg/ 100 ml, 8 of IS 82)	-	500	-
3.3 & 6.1 - Table -1, Sl no. 7(Acidity, g/100 ml, Annex C)	-	500	-
3.3 & 6.1 - Table -1, Sl no. 8(Alkalinity, Annex D)	-	500	-
3.3 & 6.1 - Table -1, Sl no. 9(Permanganate test, minutes, Annex E)	-	500	-
3.3 & 6.1 - Table -1, Sl no. 10(Alcoholic impurities, Annex F)	-	500	-
3.3 & 6.1 - Table -1, Sl no. 11(Benzene content mg/kg, Annex A)	-	1000	-
3.3 & 6.1 - Table -1, Sl no. 12(Methanol content mg/kg, Annex A)	-	1000	-

20 Aug, 2027

-
-

10662

BIS, Western Regional Laboratory (WRL)

None

IS 14333 (2022)

Polyethylene Pipes for Sewerage and Industrial Chemicals and Effluent ï¿½ Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.2.1,T2 (Melt Flow Rate (At 190°C /5kg)-IS 2530:1963)	-
7.1 (Visual Appearance- IS 14333-2022)	-
7.4,T3 of IS 4984 (Outside Diameter-IS 4984-2016)	-
7.4,T4 of IS 4984 (wall Thickness-IS 4984-2016)	-
7.4,T3 of IS 4984 (Ovality-IS 4984-2016)	-
8.2 ("Longitudinal Reversion Test - IS 4984-2016 (Annexure-F)")	-
5.2.1,T2 (Thermal Stability(Oxidation Induction Time)-IS 4984:2016(Annexure-B))	-

-
The following test facilities are not available: (1)Internal Pressure creep rupture test (2)Tensile Strength for Butt-fusion (3) Elongation at break (4) Slow Crack Growth rate test (5) Density (6) Depth of strip (7) Oxidation Induction Time (8) Overall Migration (9) Carbon Black content (10) For Size above 250 mm

10663

KC INDIA TEST LABORATORIES LLP, GHAZIABAD

9140406

IS 17505 : Part 1 (2021)

Specification for Thermosetting Insulated Fire Survival Cables for Fixed Installation having Low Emission of Smoke and Corrosive Gases when Affected by Fire for Working Voltages upto and including 1100 Vac and 1500 Vdc

Size: 1.5 to 630 sqmm

160000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 7.3, Table 1 to 5 of IS 8130:2013 & IS:10810 (Part 5)-1984(Conductor Resistance Test)	-	3000	-
Cl. 7.1.2 of IS 8130 : 2013 & IS:10810 (Part 1)-1984(Annealing Test (for copper))	-	2500	-
Cl. 7.1.1 of IS 8130:2013 & IS:10810 (Part 4)-1984(Persulphate Test for tinned copper)	-	2000	-
IS 191:2007 & IS 440(Copper purity test)	-	5000	-
Cl. 11,14,16, Table 4 and Table 6 of IS 17505 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	2000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 36)-1984(Diameter of armour Wire)	-	2000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 37)-1984(Tensile strength and elongation at break)	-	3000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 38)-1984(Torsion Test on galvanised steel wire for armouring)	-	3000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 39)-1984(Winding Test for Formed Wires)	-	3000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 40)-1984(Uniformity of Zinc coating on Round Steel Wires and Formed Steel Wires (Strips))	-	4000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 41)-1984(Mass of Zinc coating on Round Steel Wires and Formed Steel Wires (Strips))	-	4000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 42)-1984(Resistivity test)	-	4000	-
Table 1 and Table 2 of IS 17505 -1: 2021, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	3000	-
Cl 18.2 of IS 17505-1:2021 & IS:10810 (Part 45)-1984(High voltage test)	-	4000	-
Table 1 of IS 17505-1 :2021 & IS:10810 (Part 43)-1984(Insulation Resistance)	-	5000	-
Cl. 18.6 of IS 17505-1:2021 & IS:10810 (Part 58)-1998(Oxygen index)	-	4000	-
Cl. 18.7 of IS 17505-1:2021 & IS:10810 (Part 64)-2003(Temperature Index)	-	4000	-
Table-1 & Table-2 of IS 17505-1:2021 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	4000	-
Specification for thermosetting insulated fire survival cables for fixed installation having low emission of smoke and corrosive gases when affected by fire for working voltages upto and including 1100 V A.C. and 1500 V D.C(Hot deformation)	-	4000	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	2000	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	2000	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	2000	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	2000	-
Table 1 of IS 17505-1: 2021 & IS:10810 (Part 21)-1984(Cold impact test)	-	4000	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 30)-1984(Hot set test)	-	4000	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 13)-1984(Ozone Resistance test)	-	4000	-
Cl 18.5.1 of IS 17505-1 :2021 & IS:10810 (Part 61)-1988(Flame test on single cable)	-	4000	-
Table 1 of IS 17505-1:2021 & IS:10810 (Part 12)-1984(Shrinkage test)	-	4000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	2000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	2000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	2000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	2000	-
Tabel 1 and 2 of IS 17505-1:2021 & IS:10810 (Part 7)-1984(Tensile strength and elongation at break.)	-	4000	-
Tabel 1 and 2 of IS 17505-1:2021 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	4000	-
Cl 18.6 of IS 17505-1: 2021 & IS:10810 (Part 58)-1998(Oxygen Index.)	-	4000	-
Cl 18.8 of IS 17505-1:2021 & IS:10810 (Part 64)-2003(Temperature Index)	-	4000	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 13)-1984(Ozone resistance test)	-	4000	-
Table 2 of IS 17505-1:2021 & IS:10810 (Part 15)-1984(Hot deformation)	-	4000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	2000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	2000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	2000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	2000	-
Table 1 of IS 17505-1:2021 & IS:10810 (Part 12)-1984(Shrinkage test)	-	4000	-
Cl 18.2of IS 17505-1:2021 & IS:10810 (Part 45)-1984.(High Voltage test.)	-	4000	-
Cl 18.5of IS 17505-1:2021 & IS:10810 (Part 53)-1984(Flammability Test)	-	4000	-
Table-2 of IS 17505-1:2021 & IS:10810 (Part 20)-1984(Cold bend test)	-	4000	-
Table-2 of IS 17505-1:2021 & IS:10810 (Part 21)-1984(Cold impact test)	-	4000	-
Cl 18.5 of IS 17505-1:2021 & IS:10810 (Part 61)-1988(Flammability Test)	-	4000	-
Cl 18.9 of IS 17505-1:2021(Water immersion test ( effect of water on sheath of cable))	-	4000	-
Cl 18.8 of IS 17505-1:2021& IS:10810 (Part 63)-1993(Smoke density test)	-	4000	-
Cl. 3.5, 18.4 & Annex-E of IS 17505-1:2021(Circuit integrity test under fire)	-	4000	-
Cl. 17.1 Table 9 (iv) e(Heat Shock)	-	4000	-
Cl. 17.1 Table 9 (iv) h(Water absorption (Gravimetric))	-	4000	-
Cl. 17.1 Table 9 (vii) b(Flame test on bunched cable)	-	4000	-
Cl. 17.1 Table 9 (ix)(Abrasion resistance test)	-	4000	-

06 Jun, 2027

-
Included w.e.f. 20.12.2023. Size: 1.5 to 630 sqmm.

10664

AADCO TESTING & RESEARCH LABORATORY PVT LTD (F28), GHAZIABAD

8141606

IS 13592 (2013)

Unplasticized Polyvinyl Chloride (PVC-U) Pipes for Soil and Waste Discharge System Inside and Outside Buiildings Including Ventilation and Rainwater System

Type A & Type B

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.5(Surface colour of the pipes shall be dark shade of grey)	-	500	-
Cl6.3(The composition shall be based on PVC resin having a K-value of 64 or greater when tested in accordance with IS 4669)	-	1000	-
Cl.7.1(Mean out side Diameter (For less than or equal to 40 mm- Average of 8 , For higher diameters up to 110 mm average of 6))	-	500	-
Cl.7.1(Outside Diameter at any point (Take 8 reading reported minimum, maximum))	-	500	-
Cl.7.1(Wall thickness "minimum,maximum" (Take 8 reading))	-	500	-
Cl.7.2(Pipes shall be supplied in nominal lengths of 2, 3, 4 or 6 metres either plain or with socket for solvent cementing/grooved socket. Tolerances on specified length shall be + 10 mm and – 0 mm.The nominal length of the pipe with socket for solvent cementing/grooved socket shall be as given in Fig. 1.)	-	500	-
Cl.7.3.1(Minimum wall thickness of socket on pipes shall be as given in Table 2 read with Fig. 2 and Fig. 3.)	-	500	-
Cl.7.3.2(Dimensions of sockets for solvent cementing and grooved sockets of pipes shall be as given in Tables 3 and 4 respectively, read with Fig. 2 and 3.)	-	500	-
Cl.8.1(The internal and external surface of the pipes shall be smooth and clean, and free from grooving and other defects. The end shall be clearly cut and shall be square with the axis of the pipe. The end may be chamfered on the plain side.)	-	500	-
Cl.8.2(When tested by the method described in IS 12235 (Part 5), a length of pipe sample of 200 ± 20 mm shall not alter in length by more than 5 percent. In the case of socket ended pipes, this test shall be carried out on the plain portion of pipe taken at least 100 mm away from the root of the socket.)	-	500	-
Cl8.3(This test shall be carried out for socket end pipes only. When tested by the method described in IS 12235 (Part 6), the test specimens shall not show blisters, excessive delamination or cracking or signs of weld line splitting.)	-	500	-
Cl.8.4(When determined in accordance with IS 12235 (Part 2), the vicat softening temperature of the specimen shall not be less than 79°C.)	-	500	-
Cl.8.5(After the required period of exposure, the tensile strengths of two samples when tested as per IS 12235 (Part 13) shall not show difference of more than 20 percent of their initial tensile strengths)	-	1000	-
Cl.10.1(When tested by method prescribed in IS 12235 (Part 9),the pipe shall have a true impact rate of not more than 10 percent. Mass of striker and height of fall shall be as per Annex A.)	-	1000	-
Cl.10.2(When determined in accordance with the method described in IS 12235 (Part 13), the tensile strength at break shall not be less than 45 MPa.)	-	1000	-
Cl.10.3(The axial shrinkage shall not exceed 2 percent when determined in accordance with Annex B.)	-	2000	-
Cl.11.(Jointing of solvent cementing joints is to be carried out using solvent conforming to IS 14182. Apply a pressure of 0.05 MPa for a period of 15 min and there should be no leakage at any joint.)	-	1000	-
Cl. 12, IS 12235 Part 11(Resistance to Di-Chloro-Methane)	-	1500	-
8.6(Effect on Water Test)	-	1500	-
14(Marking)	-	500	-
Cl. 9, IS 12235 Part 7(Resistance to Sulphuric Acid)	-	1000	-
Cl.5(Surface colour of the pipes shall be dark shade of grey)	-	500	-
Cl6.3(The composition shall be based on PVC resin having a K-value of 64 or greater when tested in accordance with IS 4669)	-	1000	-
Cl.7.1(Mean out side Diameter (For less than or equal to 40 mm- Average of 8 , For higher diameters up to 110 mm average of 6))	-	500	-
Cl.7.1(Outside Diameter at any point (Take 8 reading reported minimum, maximum))	-	500	-
Cl.7.1(Wall thickness "minimum,maximum" (Take 8 reading))	-	500	-
Cl.7.2(Pipes shall be supplied in nominal lengths of 2, 3, 4 or 6 metres either plain or with socket for solvent cementing/grooved socket. Tolerances on specified length shall be + 10 mm and – 0 mm.The nominal length of the pipe with socket for solvent cementing/grooved socket shall be as given in Fig. 1.)	-	500	-
Cl.7.3.1(Minimum wall thickness of socket on pipes shall be as given in Table 2 read with Fig. 2 and Fig. 3.)	-	500	-
Cl.7.3.2(Dimensions of sockets for solvent cementing and grooved sockets of pipes shall be as given in Tables 3 and 4 respectively, read with Fig. 2 and 3.)	-	500	-
Cl.8.1(The internal and external surface of the pipes shall be smooth and clean, and free from grooving and other defects. The end shall be clearly cut and shall be square with the axis of the pipe. The end may be chamfered on the plain side.)	-	500	-
Cl.8.2(When tested by the method described in IS 12235 (Part 5), a length of pipe sample of 200 ± 20 mm shall not alter in length by more than 5 percent. In the case of socket ended pipes, this test shall be carried out on the plain portion of pipe taken at least 100 mm away from the root of the socket.)	-	1000	-
Cl8.3(This test shall be carried out for socket end pipes only. When tested by the method described in IS 12235 (Part 6), the test specimens shall not show blisters, excessive delamination or cracking or signs of weld line splitting.)	-	1000	-
Cl.8.4(When determined in accordance with IS 12235 (Part 2), the vicat softening temperature of the specimen shall not be less than 79°C.)	-	1000	-
Cl.8.5(After the required period of exposure, the tensile strengths of two samples when tested as per IS 12235 (Part 13) shall not show difference of more than 20 percent of their initial tensile strengths)	-	1000	-
Cl.10.1(When tested by method prescribed in IS 12235 (Part 9),the pipe shall have a true impact rate of not more than 10 percent. Mass of striker and height of fall shall be as per Annex A.)	-	1000	-
Cl.10.2(When determined in accordance with the method described in IS 12235 (Part 13), the tensile strength at break shall not be less than 45 MPa.)	-	1000	-
Cl.10.3(The axial shrinkage shall not exceed 2 percent when determined in accordance with Annex B.)	-	1000	-
Cl.11.(Jointing of solvent cementing joints is to be carried out using solvent conforming to IS 14182. Apply a pressure of 0.05 MPa for a period of 15 min and there should be no leakage at any joint.)	-	1000	-
Cl. 12, IS 12235 Part 11(Resistance to Di-Chloro-Methane)	-	1500	-
8.6(Effect on Water Test)	-	1500	-
14(Marking)	-	500	-
Cl. 9, IS 12235 Part 7(Resistance to Sulphuric Acid)	-	1000	-
Cl.5(Surface colour of the pipes shall be dark shade of grey)	-	500	-
Cl6.3(The composition shall be based on PVC resin having a K-value of 64 or greater when tested in accordance with IS 4669)	-	1500	-
Cl.7.1(Mean out side Diameter (For less than or equal to 40 mm- Average of 8 , For higher diameters up to 110 mm average of 6))	-	500	-
Cl.7.1(Outside Diameter at any point (Take 8 reading reported minimum, maximum))	-	500	-
Cl.7.1(Wall thickness "minimum,maximum" (Take 8 reading))	-	500	-
Cl.7.2(Pipes shall be supplied in nominal lengths of 2, 3, 4 or 6 metres either plain or with socket for solvent cementing/grooved socket. Tolerances on specified length shall be + 10 mm and – 0 mm.The nominal length of the pipe with socket for solvent cementing/grooved socket shall be as given in Fig. 1.)	-	500	-
Cl.7.3.1(Minimum wall thickness of socket on pipes shall be as given in Table 2 read with Fig. 2 and Fig. 3.)	-	500	-
Cl.7.3.2(Dimensions of sockets for solvent cementing and grooved sockets of pipes shall be as given in Tables 3 and 4 respectively, read with Fig. 2 and 3.)	-	500	-
Cl.8.1(The internal and external surface of the pipes shall be smooth and clean, and free from grooving and other defects. The end shall be clearly cut and shall be square with the axis of the pipe. The end may be chamfered on the plain side.)	-	500	-
Cl.8.2(When tested by the method described in IS 12235 (Part 5), a length of pipe sample of 200 ± 20 mm shall not alter in length by more than 5 percent. In the case of socket ended pipes, this test shall be carried out on the plain portion of pipe taken at least 100 mm away from the root of the socket.)	-	1000	-
Cl8.3(This test shall be carried out for socket end pipes only. When tested by the method described in IS 12235 (Part 6), the test specimens shall not show blisters, excessive delamination or cracking or signs of weld line splitting.)	-	1000	-
Cl.8.4(When determined in accordance with IS 12235 (Part 2), the vicat softening temperature of the specimen shall not be less than 79°C.)	-	1000	-
Cl.8.5(After the required period of exposure, the tensile strengths of two samples when tested as per IS 12235 (Part 13) shall not show difference of more than 20 percent of their initial tensile strengths)	-	3000	-
Cl.10.1(When tested by method prescribed in IS 12235 (Part 9),the pipe shall have a true impact rate of not more than 10 percent. Mass of striker and height of fall shall be as per Annex A.)	-	1000	-
Cl.10.2(When determined in accordance with the method described in IS 12235 (Part 13), the tensile strength at break shall not be less than 45 MPa.)	-	1000	-
Cl.10.3(The axial shrinkage shall not exceed 2 percent when determined in accordance with Annex B.)	-	1200	-
Cl.11.(Jointing of solvent cementing joints is to be carried out using solvent conforming to IS 14182. Apply a pressure of 0.05 MPa for a period of 15 min and there should be no leakage at any joint.)	-	1000	-
Cl. 12, IS 12235 Part 11(Resistance to Di-Chloro-Methane)	-	10001	-
8.6(Effect on Water Test)	-	2000	-
14(Marking)	-	500	-
Cl. 9, IS 12235 Part 7(Resistance to Sulphuric Acid)	-	800	-

26 Jul, 2027

-
-

10665

Hindustaan Testing Solutions LLP, Ambala

9122136

IS 3097 (2006)

Veneered Particle Boards -Specification

All

38500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause No - 3(TERMINOLOGY)	-	0	-
Clause No - 4(GRADES AND TYPES)	-	0	-
Clause No - 5.1(Particle Board)	-	14700	Grade 1-14700, Grade 2-11700
Clause No - 5.2.1.1("Timbers for face veneers of decorative type veneered particle boards")	-	0	-
Clause No - 5.2.1.1(a)("particle boards, shall be of Type A or Type B surface ")	-	0	-
Clause No - 5.3(Adhesive)	-	8000	MR grade-7200 & BWR & BWP-8000
Clause No - 6.1(Preservative Treatment of Veneers)	-	0	-
Clause No - 6.2.7(Lipping)	-	0	-
Clause No - 7(Dimensional Tolerance)	-	800	-
Clause No - 9.1 (1(cutting the test specimens)	-	0	-
Clause No - 9.1 (2(" method of preparation and conditioning oftest specimens")	-	0	-
Clause No - 9.1 (a(Determination of density)	-	800	-
Clause No - 9.1 (b(Determination of moisture content)	-	800	-
Clause No - 9.1 (c(Water absorption)	-	1500	-
Clause No - 9.1 (e) (1(Determination of swelling in water - Swelling due to general absorption)	-	2000	-
Clause No - 9.1 (e) (2(Determination of swelling in water -Swelling due to surface absorption)	-	2000	-
Clause No - 9.1 (g)("Modulus of rupture (MOR) and modulus of elasticity (MOE) ")	-	1500	-
Clause No - 9.1 (h)("Determination of deflection under sustained load (long time loading test)")	-	1000	-
Clause No - 11(MARKING)	-	0	-
Clause No - 3(TERMINOLOGY)	-	0	-
Clause No - 4(GRADES AND TYPES)	-	0	-
Clause No - 5.1(Particle Board)	-	0	-
Clause No - 5.2.1.1("Timbers for face veneers of decorative type veneered particle boards")	-	0	-
Clause No - 5.2.1.1(a)("particle boards, shall be of Type A or Type B surface ")	-	0	-
Clause No - 5.3(Adhesive)	-	0	-
Clause No - 6.1(Preservative Treatment of Veneers)	-	0	-
Clause No - 6.2.7(Lipping)	-	0	-
Clause No - 7(Dimensional Tolerance)	-	0	-
Clause No - 9.1 (1(cutting the test specimens)	-	0	-
Clause No - 9.1 (2(" method of preparation and conditioning oftest specimens")	-	0	-
Clause No - 9.1 (a(Determination of density)	-	0	-
Clause No - 9.1 (b(Determination of moisture content)	-	0	-
Clause No - 9.1 (c(Water absorption)	-	0	-
Clause No - 9.1 (e) (1(Determination of swelling in water - Swelling due to general absorption)	-	0	-
Clause No - 9.1 (e) (2(Determination of swelling in water -Swelling due to surface absorption)	-	0	-
Clause No - 9.1 (g)("Modulus of rupture (MOR) and modulus of elasticity (MOE) ")	-	0	-
Clause No - 9.1 (h)("Determination of deflection under sustained load (long time loading test)")	-	0	-
Clause No - 11(MARKING)	-	0	-
Clause 9.1 d) Water Resistance test(Clause 9.1 d) Water Resistance test)	-	1500	-
9.1 f)Adhesion of plies(9.1 f)Adhesion of plies)	-	500	Testing charges-38500 (Separate testing charges- IS 3097-15800, Particle board-Grade 14700 & Grade 2-11700, Adhesive-MR-7200 & BWR & BWP-8000) 20% Discount to BIS GSTIN as per govt rule

12 Sep, 2028

-
Included w.e.f. 16.01.2024

10666

Hindustaan Testing Solutions LLP, Ambala

9122136

IS 15786 (2008)

Prelaminated cement bonded particle board - Specification

All

32900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 10.3 (Moisture content)	-	600	-
Clause 10.3 (Moisture content)	-	0	-
Clause 10.3 (Moisture content)	-	0	-
5.1(Cement Bonded Particle Board)	-	14400	-
5.2(Impregnated Base Paper)	-	1000	-
5.3(Impregnated OverlaylUnderIay)	-	1000	-
5.4(Finished Foil)	-	1000	-
6(Manufacture)	-	0	-
7(Finish)	-	0	-
8(DIMENSIONS AND TOLERANCES)	-	600	-
10.2(Test for Density)	-	600	-
10.4(Test for Water Absorption)	-	1200	-
10.5(Test for Swelling in Water)	-	1200	-
10.6(Test for Modulus of Elasticity and Modulus of Rupture)	-	1000	-
10.7(Test for Tensile Strength Perpendicular to Surface)	-	1000	-
10.8(Test for Tensile Strength Perpendicular to Surface After Ageing)	-	3000	-
10.9(Test for Screw Withdrawal Strength)	-	2000	Face-1000 Edge-1000
10.10(Test for Abrasion Resistance)	-	1500	-
10.11(Test for Resistance to Steam)	-	600	-
10.12(Test for Resistance to Crack)	-	600	-
10.13(Test for Resistance to Cigarette Bum)	-	600	-
10.14(Test for Resistance to Stain)	-	600	Complete Testing Charges IS-32900 (For IS 15786 physical tests-15500, Raw material cl. 5.2, 5.3, 5.4-3000, IS 14276 as per clause 5.1-14400 ) 20% discount to BIS GSTIN as per govt. rule
11(Marking)	-	0	-

12 Sep, 2028

-
Included w.e.f. 16.01.2024

10667

Hindustaan Testing Solutions LLP, Ambala

9122136

IS 14276 (2016)

Cement bonded particle boards - Specification (First Revision)

All

14400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Finish)	-	400	-
7(Dimensions and Tolerances)	-	600	-
8.5(Workability)	-	500	-
10.3, Table-1(Test for Density)	-	600	-
10.5, Table-1(Test for Water Absorption)	-	1200	-
10.6, Table-1(Test for swelling in water)	-	2000	-
10.7, Table-1(Test for modulus of Rupture)	-	1500	Dry & Wet
10.8, Table-1(Test for modulus of Elasticity)	-	1500	Dry & Wet
10.9, Table-1(Test for tensile strength perpendicular to Surface)	-	3500	Dry-1000 & Cyclic-2500
10.1, Table-1(Test for Screw Withdrawal Strength)	-	2000	-
Clause 8.2 Table 1(Moisture content)	-	600	20% discount to BIS GSTIN as per govt. rule

12 Sep, 2028

-
Included w.e.f. 05.01.2024

10668

Hindustaan Testing Solutions LLP, Ambala

9122136

IS 14616 (1999)

Laminated veneer lumber specification

All (upto 50 mm)

17500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Dimensions)	-	200	Total testing charges-17700(upto 50mm testing only) 20% discount to BIS GSTIN as per govt rule
6.2(Dimensions)	-	200	-
7(workmanship and finish)	-	600	-
8.2.2(adhesion of plies)	-	4900	Dry State-400, After Cyclic test-2000, After Mycological test-2500
8.2.3, 8.2.4, Table-1(modulus of rupture)	-	1500	-
8.2.3, 8.2.4, Table-1(modulus of elasticity)	-	1500	-
8.2.3, 8.2.4, Table-1(compressive strength parallel to grain)	-	1500	-
8.2.3, 8.2.4, Table-1(horizontal shear a)-parallel to grain ,b)-perpendicular to grain)	-	3000	-
8.2.3, 8.2.4, Table-1(tensile strength parallel to grain )	-	2000	-
8.2.3, 8.2.4, Table-1(screw holding power a)-parallel to grain ,b)-perpendicular to grain)	-	2000	-
8.2.3, 8.2.4, Table-1(thickness swelling in 2 hrs. water soaking)	-	0	-
8.2.4(swelling in wear)	-	800	-
Clause 8.2.1(Moisture content)	-	800	-
8.2.1(moisture content)	-	800	-
6.1(Dimensions)	-	0	-
6.2(Dimensions)	-	0	-
7(workmanship and finish)	-	0	-
8.2.2(adhesion of plies)	-	0	-
8.2.3, 8.2.4, Table-1(modulus of rupture)	-	0	-
8.2.3, 8.2.4, Table-1(modulus of elasticity)	-	0	-
8.2.3, 8.2.4, Table-1(compressive strength parallel to grain)	-	0	-
8.2.3, 8.2.4, Table-1(horizontal shear a)-parallel to grain ,b)-perpendicular to grain)	-	0	-
8.2.3, 8.2.4, Table-1(tensile strength parallel to grain )	-	0	-
8.2.3, 8.2.4, Table-1(screw holding power a)-parallel to grain ,b)-perpendicular to grain)	-	0	-
8.2.3, 8.2.4, Table-1(thickness swelling in 2 hrs. water soaking)	-	0	-
8.2.4(swelling in wear)	-	0	-
Clause 8.2.1(Moisture content)	-	0	-
8.2.1(moisture content)	-	0	-

12 Sep, 2028

-
Included w.e.f. 16.01.2024

10669

KC INDIA TEST LABORATORIES LLP, GHAZIABAD

9140406

IS 9968 : Part 2 (2002)

Specification for elastomer - Insulated cables: Part 2 for working voltages from 3.3 kV up to and including 33 kV (First Revision)

Size: 16 to 630 sqmm

190000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(CONDUCTORS: Cables for Fixed Installation)	-	200	-
4.2(CONDUCTORS:Flexible Cables)	-	200	-
5(INSULATION)	-	200	-
6(SEMICONDUCTING COMPOUND)	-	200	-
7.1(Proofed Tape)	-	200	-
7.1(Proofed Tape: Thickness)	-	200	-
7.2(Polyethylene Terephthalate ( P E T P ) or Polypropylene Base Tape : Thickness)	-	200	-
7.3(Tape )	-	200	-
8(SCREENING)	-	200	-
9(CENTRE AND FILLERS)	-	200	-
10(ARMOUR)	-	200	-
11.1(Inner Sheath)	-	200	-
11.2(Outer Sheath)	-	200	-
12.1(Tapes)	-	200	-
12.2(Cords and Yarns)	-	200	-
13.1 & 13.2(CONSTRUCTION:CONDUCTORS-Cables for Fixed Installations/Flexible Cables)	-	200	-
13.3(Earthing Conductor)	-	200	-
13.3.1(Earthing Conductor)	-	200	-
13.4(Separator Tape)	-	200	-
14(CONDUCTOR SCREENING)	-	200	-
15.1(INSULATION : Application)	-	200	-
15.2(Thickness of Insulation)	-	1000	-
15.3(Tolerance on Thickness of Insulation)	-	1000	-
16.1(INSULATION SCREENING : Application)	-	200	-
16.2(INSULATION SCREENING : Parts )	-	200	-
16.3(INSULATION SCREENING : Non Metallic Parts )	-	200	-
16.4(INSULATION SCREENING : Metallic Parts )	-	200	-
17(CORE IDENTIFICATION)	-	200	-
17(CORE IDENTIFICATION: Unscreed cable )	-	200	-
18.1(LAYING UP OF CORES)	-	200	-
18.2(LAYING UP OF CORES : Flexible cable)	-	200	-
18.3(LAYING UP OF CORES : Binder Tape)	-	200	-
19.1(Inner Sheath : Application)	-	200	-
19.2(Thickness of Inner Sheath)	-	1000	-
19.3(Inner Sheath : proofed tape)	-	200	-
20.1(ARMOURING: Application)	-	200	-
20.2(Type of Armour)	-	200	-
20.2 1.2(Direction of lay of armour)	-	200	-
20.2 1.3(Joint in armour)	-	200	-
20.2.2(Filling Factot )	-	200	-
20.2.2(Diameter of braiding)	-	200	-
20.2.2.1(Braiding material)	-	200	-
20.3(Substitution of the galvanized steel wires/formed)	-	200	-
21.1(OUTER SHEATH)	-	200	-
21.2(Coulor of Outer sheath)	-	200	-
21.3(Thickness of Outer Sheat: Average)	-	1000	-
21.3(Thickness of Outer Sheat: Minimum)	-	1000	-
22.1 a)1)(Annealing test (for copper) - IS 10810: Part 1)	-	500	-
22.1 a)2)(Tensile test (for aluminium) -IS 10810: Part 2)	-	1000	-
22.1 a)3)(Wrapping Test (for aluminium) - IS 10810: Part 3)	-	1000	-
22.1 a)4)(Conductor resistance test)	-	1000	-
22.1 a)5)(Persulphate test (tinned copper conductor)- IS 10810: Part 4)	-	1000	-
22.1 b)1)(Test for Galvanized Steel Wires/Formed Wires 1) Dimensions -IS 10810: Part 36)	-	1000	-
22.1 b)2)i)(Test for Galvanized Steel Wires/Formed Wires 2) Tensile Strentgh -IS 10810: Part 37)	-	1000	-
22.1 b)2)ii)(Test for Galvanized Steel Wires/Formed Wires 2) Elongation at break -IS 10810: Part 37)	-	1000	-
22.1 b)2)iii)(Test for Galvanized Steel Wires/Formed Wires 3) Torsion (for round wires only) -IS 10810: Part 38)	-	1000	-
22.1 b)2)iv)(Test for Galvanized Steel Wires/Formed Wires 4) Winding (for strips only) -IS 10810: Part 39)	-	1000	-
22.1 b)2)v)(Test for Galvanized Steel Wires/Formed Wires 5) Zinc coating : Uniformity-IS 10810: Part 40)	-	1000	-
22.1 b)2)vi)(Test for Galvanized Steel Wires/Formed Wires 5) Zinc coating : Mass -IS 10810: Part 41)	-	1000	-
22.1 b)2) vii) (Resistivity - IS 10810: Part 42)	-	1000	-
22.1 c)2)(Physical Tests for Insulation : Tensile Strenth - IS 10810: Part 7)	-	1000	-
22.1 c)2)(Physical Tests for Insulation : Elongation - IS 10810: Part 7)	-	1000	-
22.1 c)2)(Physical Tests for Sheath : Tensile Strenth - IS 10810: Part 7)	-	1000	-
22.1 c)2)(Physical Tests for Sheath : Elongation - IS 10810: Part 7)	-	1000	-
22.1 c)3)(Physical Tests for Insulation ( Ageing in air oven): Tensile Strenth - IS 10810: Part 11)	-	1000	-
22.1 c)3)(Physical Tests for Insulation ( Ageing in air oven): Tensile Strenth Variation - IS 10810: Part 12)	-	1000	-
22.1 c)3)(Physical Tests for Insulation( Ageing in air oven) : Elongation - IS 10810: Part 11)	-	1000	-
22.1 c)3)(Physical Tests for Insulation( Ageing in air oven) : Elongation variation - IS 10810: Part 12)	-	1000	-
22.1 c)3)(Physical Tests for Sheath( Ageing in air oven) : Tensile Strenth - IS 10810: Part 11)	-	1000	-
22.1 c)3)(Physical Tests for Sheath( Ageing in air oven) : Tensile Strenth variation - IS 10810: Part 12)	-	1000	-
22.1 c)3)(Physical Tests for Sheath ( Ageing in air oven): Elongation - IS 10810: Part 11)	-	1000	-
22.1 c)3)(Physical Tests for Sheath ( Ageing in air oven): Elongation variation - IS 10810: Part 12)	-	1000	-
22.1 c)4)(Physical Tests for Insulation ( Ageing in air bomb): Tensile Strenth variation - IS 10810: Part 56)	-	1000	-
22.1 c)4)(Physical Tests for Insulation( Ageing in air bomb) : Elongation variation - IS 10810: Part 56)	-	1000	-
22.1 c)4)(Physical Tests for Sheath(Ageing in air bomb) : Tensile Strenth variation - IS 10810: Part 56)	-	1000	-
22.1 c)4)(Physical Tests for Sheath ( Ageing in air bomb): Elongation variation - IS 10810: Part 56)	-	1000	-
22.1 c)5)(Physical Tests for Insulation :Hot set Elongation - IS 10810: Part 30)	-	1500	-
22.1 c)5)(Physical Tests for Insulation :Permanent set - IS 10810: Part 30)	-	1500	-
22.1 c)5)(Physical Tests for Sheath :Hot set Elongation - IS 10810: Part 30)	-	1500	-
22.1 c)5)(Physical Tests for Sheath :Permanent set - IS 10810: Part 30)	-	1500	-
22.1 c)6)(Physical Tests for Sheath(Oil resistance test) : Tensile Strenth Variation - IS 10810: Part 31)	-	1500	-
22.1 c)6)(Physical Tests for Sheath ( Oil resistance test): Elongation Variation - IS 10810: Part 31)	-	1500	-
22.1 c)7)(Tear Resistance test - IS 10810: Part 17)	-	1500	-
22.1 c)8)(Shrinkage : Insulation - IS 10810: Part 12)	-	1500	-
22.1 c)8)(Shrinkage test- Crack observed : Insulation - IS 10810: Part 13)	-	1500	-
22.1 c)8)(Shrinkage test : Sheath - IS 10810: Part 12)	-	1500	-
22.1 c)8)(Shrinkage test - Crack oberved : Sheath - IS 10810: Part 13)	-	1500	-
22.1 c)9)(Hot deformation test : Insulation - IS 10810: Part 15)	-	1500	-
22.1 c)9)(Hot deformation test : Sheath - IS 10810: Part 15)	-	1500	-
22.1 c)10)(Loss of mass in air oven : Insulation - IS 10810: Part 10)	-	1500	-
22.1 c)10)(Loss of mass in air oven : Sheath - IS 10810: Part 10)	-	1500	-
22.1 c)11)(Heat shock : Insulation - IS 10810: Part 14)	-	1500	-
22.1 c)11)(Heat shock : Sheath - IS 10810: Part 14)	-	1500	-
22.1 c)12)(Thermal stability : Insulation - IS 10810: Part 60)	-	1500	-
22.1 c)12)(Thermal stability : Sheath - IS 10810: Part 60)	-	1500	-
22.1 d)(Insulation Resistance Test: Volume resistivity )	-	1500	-
22.1 d)(Insulation Resistance Test: Insulation resistance constant )	-	1500	-
22.1 e)(Partial Discharge Test)	-	35000	-
22.1 f)(Bending Test Followed by Partial Discharge Test)	-	25000	-
22.1 g)(Dielectric Power Factor Test 1) As a function of Voltage)	-	1000	-
22.1 g)(Dielectric Power Factor Test 1) As a function of temperature)	-	1000	-
22.1 h)(Heating Cycle Test)	-	25000	-
22.1 j)(Impulse Withstand Test)	-	25000	-
22.1 k)(High Voltage Test for Four Hours)	-	25000	-
22.1 m)(Water Absorption Test - IS 10810: Part 28)	-	1500	-
22.1 n)(Flammability)	-	5000	-
24.1(Manufacturer's Identification)	-	200	-
24.2(Voltage Identification)	-	200	-
24.3(Cable Code)	-	200	-
25.2.1(Marking on drum )	-	200	-
25.2.2(BIS Certification Marking)	-	200	-

06 Jun, 2027

-
Included w.e.f. 20.12.2023. Size: 16 to 630 sqmm

10670

Hindustaan Testing Solutions LLP, Ambala

9122136

IS 2202 : Part 2 (2022)

WOODEN FLUSH DOOR SHUTTERS SOLID CORE TYPE SPECIFICATION PART 2 PARTICLE BOARD HIGH DENSITY FIBRE BOARD MEDIUM DENSITY FIBRE BOARD AND HARDBOARD FACE PANELS Fourth Revision

All

24800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause No - 6.1(Timber)	-	2000	Extra charges for Clause 6.1-2000
Clause No -6.2(Alternative Materials (LVL)	-	17500	Extra charges for Clause 6.2-17500
Clause No -6.2(Alternative Materials veneer laminated lumber (VLL))	-	11700	Extra charges for Clause 6.2-11700
Clause No -6.2(Alternative Materials medium density fibre board (MDF))	-	13800	Extra charges for Clause 6.2-13800
Clause No -6.2(Alternative Materials -plywood)	-	17500	Extra charges for Clause 6.2-for IS 710-12600 & IS 303-4900
Clause No -6.2(BWP grade flush door shutter)	-	0	-
Clause No -6.3.1("Face Panels: Particle Board MDF/ HDF Fibre Hardboard")	-	14700	Extra charges for Clause 6.3.1for IS 3087-14700
Clause No -6.4(Adhesive)	-	8000	Extra Charges for Clause 6.4 for MR-7200 & BWP-8000
Clause No -7.1(Construction)	-	0	-
Clause No - 7.3(" MDF board or HDF board ")	-	0	-
Clause No -9.2("Workmanship and finish")	-	200	-
Clause No -10.1(tests for flush door shutters)	-	20000	-
Clause No -10.2(End Immersion Test)	-	3400	BWP-2800, MR-600
Clause No -10.3(Glue Adhesion Test)	-	1200	Testing Charges for -24200-BWP & 22000-MR Extra charges for Clause 6.1, 6.2, 6.3, 6.4, 6.5, 7.2 raw material as mention in remarks 20% discount to BIS GSTIN applicable as per govt rule
Clause No -11(SAMPLING AND CRITERIA FOR CONFORMITY)	-	0	-
Clause No -12("ADDITIONAL REQUIREMENTS FOR ECO MARK")	-	0	-
Clause No - 6.1(Timber)	-	0	-
Clause No -6.2(Alternative Materials (LVL)	-	0	-
Clause No -6.2(Alternative Materials veneer laminated lumber (VLL))	-	0	-
Clause No -6.2(Alternative Materials medium density fibre board (MDF))	-	0	-
Clause No -6.2(Alternative Materials -plywood)	-	0	-
Clause No -6.2(BWP grade flush door shutter)	-	0	-
Clause No -6.3.1("Face Panels: Particle Board MDF/ HDF Fibre Hardboard")	-	0	-
Clause No -6.4(Adhesive)	-	0	-
Clause No -7.1(Construction)	-	0	-
Clause No - 7.3(" MDF board or HDF board ")	-	0	-
Clause No -9.2("Workmanship and finish")	-	0	-
Clause No -10.1(tests for flush door shutters)	-	0	-
Clause No -10.2(End Immersion Test)	-	0	-
Clause No -10.3(Glue Adhesion Test)	-	0	-
Clause No -11(SAMPLING AND CRITERIA FOR CONFORMITY)	-	0	-
Clause No -12("ADDITIONAL REQUIREMENTS FOR ECO MARK")	-	0	-
5(SIZES AND TOLERANCES)	-	0	-
6.5(The swelling in thickness of the particle board, MDF and HDF board for core)	-	800	Testing Charges for -24200-BWP & 22000-MR Extra charges for Clause 6.1, 6.2, 6.3, 6.4, 6.5, 7.2 raw material as mention in remarks 20% discount to BIS GSTIN applicable as per govt rule

12 Sep, 2028

-
Included w.e.f. 16.01.2024

10671

KC INDIA TEST LABORATORIES LLP, GHAZIABAD

9140406

IS 1554 : Part 2 (1988)

Specification for pvc insulated (Heavy Duty) electric cables: Part 2 for working voltages from 3.3 kV up to and including 11 kV (Second Revision)

Size: 25 to 630 sqmm

190000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(CONDUCTOR)	-	200	-
3.1.1(CONDUCTOR)	-	200	-
4.1(INSULATION)	-	200	-
5.1(SCREENING)	-	200	-
6.1(FILLERS AND INNER SHEATH)	-	500	-
6.2(FILLERS AND INNER SHEATH)	-	500	-
7.1(ARMOURING)	-	200	-
7.2(ARMOURING)	-	200	-
8.1(OUTER SHEATH)	-	200	-
9.1(CONDUCTOR)	-	200	-
9.2(CONDUCTOR)	-	200	-
10.1(CONDUCTOR SCREENING)	-	200	-
11.1(INSULATION)	-	200	-
11.2(INSULATION : Thickness of Insulation)	-	200	-
11.3(INSULATION : Tolerance on Thickness of Insulation)	-	200	-
11.4(INSULATION : Application of Insulation)	-	200	-
12.1(INSULATION SCREENING)	-	200	-
12.2(INSULATION SCREENING)	-	200	-
12.3(INSULATION SCREENING)	-	200	-
12.4(INSULATION SCREENING)	-	200	-
13.1(CORE IDENTIFICATION)	-	200	-
13.1.1(CORE IDENTIFICATION)	-	200	-
14.1(LAYING UP OF CORES)	-	200	-
15.1(INNER SHEATH (COMMON COVERING))	-	200	-
15.2(INNER SHEATH (COMMON COVERING))	-	200	-
15.3(INNER SHEATH (COMMON COVERING))	-	200	-
15.4(INNER SHEATH (COMMON COVERING) : Thickness of Inner Sheath)	-	200	-
15.4.1(INNER SHEATH (COMMON COVERING) : Thickness of Inner Sheath)	-	200	-
16.1.1(ARMOURING : Application)	-	200	-
16.1.2(ARMOURING : Application)	-	200	-
16.1.3(ARMOURING : Direction of lay )	-	200	-
16.1.4(ARMOURING : Application)	-	200	-
16.2.1(ARMOURING : Type of Armour)	-	200	-
16.2.2(ARMOURING : Type of Armour)	-	200	-
16.3(Armouring : Dimensions -Wire Diameter)	-	200	-
16.3(Armouring : Dimensions -Formed wire )	-	200	-
16.4(ARMOURING : Joints)	-	200	-
16.5(ARMOURING : Resistance)	-	200	-
13.6 a)(ARMOURING: Tensile Strength)	-	1000	-
13.6 b)(ARMOURING: Elongation )	-	1000	-
13.6 c)(ARMOURING: Torsion Test (For round wire ) )	-	1000	-
13.6 d)(ARMOURING: Winding Test(For formed wire))	-	1000	-
13.6 e)(ARMOURING: Uniformity of zinc coating)	-	1000	-
13.6 f)(ARMOURING: Mass of zinc coating )	-	1000	-
13.6 g)(ARMOURING: Resistivity)	-	1000	-
17.1(OUTER SHEATH)	-	200	-
17.2(OUTER SHEATH : colour )	-	200	-
17.3.1(Thickness of Outer Sheath : Unarmoured Cables)	-	1000	-
17.3.2(Thickness of Outer Sheath : Armoured Cables)	-	1000	-
18.1 a) 1)(Tests on Conductor : Annealing test (for copper))	-	500	-
18.1 a) 2)(Tensile test (for aluminium) - Before stranding )	-	1000	-
18.1 a) 2)(Tensile test (for aluminium) - After stranding )	-	1000	-
18.1 a) 3)(Tests on Conductor : Wrapping test ( for aluminium))	-	1000	-
18.1 a)4)(Tests on conductor : Conductor resistance test - Main conductor )	-	1000	-
18.1 a)4)(Resistance test - Neutral conductor )	-	1000	-
18.1 d) 1)(Phyaical tests for insulation : Tensile Test)	-	1000	-
18.1 d) 1)(Phyaical tests for insulation : Elongation )	-	1000	-
18.1 d) 1)(Physical tests for sheath : Tensile stregth )	-	1000	-
18.1 d) 1)(Physical tests for sheath : Elongation )	-	1000	-
18.1 d) 2)(Phyaical tests for insulation- Ageing in air Oven : Tensile Test)	-	1000	-
18.1 d) 2)(Phyaical tests for insulation - Ageing in air oven : Elongation )	-	1000	-
18.1 d) 2)(Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-	1000	-
18.1 d) 2)(Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-	1000	-
18.1 d) 2)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-	1000	-
18.1 d) 2)(Physical tests for outer sheath -Ageing in air oven : Elongation )	-	1000	-
18.1 d) 2)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation )	-	1000	-
18.1 d) 2)(Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-	1000	-
18.1 d) 3)(Phyaical tests for insulation : Shrinkage )	-	1500	-
18.1 d) 3)(Phyaical tests for insulation : Shrinkage - Crack observed )	-	1500	-
18.1 d) 3)(Phyaical tests for Sheath : Shrinkage )	-	1500	-
18.1 d) 3)(Phyaical tests for Sheath : Shrinkage - Crack observed )	-	1500	-
18.1 d) 4)(Hot deformation : Insulation )	-	1500	-
18.1 d) 4)(Hot deformation : Sheath )	-	1500	-
18.1 d) 5)( Loss of mass in air oven- Insulation )	-	1500	-
18.1 d) 5)( Loss of mass in air oven- sheath )	-	1500	-
18.1 d) 6)(Heat shock test- Insulation )	-	1500	-
18.1 d) 6)(Heat shock test- sheath )	-	1500	-
18.1 d) 7)(Thermal stability- insulation )	-	1500	-
18.1 d) 7)(Thermal stability- Sheath )	-	1500	-
18.1 d) 8)(Water absorption (gravimetric)(for insulation, where applicable))	-	1500	-
18.1 e)(Insulation resistance test : Volume Resistivity )	-	1500	-
18.1 e)(Insulation resistance test : IR Constant )	-	1500	-
19.2(Partial discharge test)	-	35000	-
19.3(Bending test)	-	1000	-
19.4(Dielectric power factor test)	-	1000	-
19.4(Dielectric power factor test)	-	1000	-
19.5(Heating cycle test)	-	25000	-
19.6(Impulse withstand test)	-	25000	-
19.7(High voltage test)	-	25000	-
19.8(Flammability test)	-	5000	-
19.9(Oxygen Index Test)	-	5000	-
19.10(Flame Retardance Test on Single Cables)	-	5000	-
19.11(Flame Retardance Test on Bunched Cables)	-	8000	-
19.13(Test for Halogen Acid Gas Evolution)	-	8000	-
19.14(Temperature Index)	-	5000	-
18.4(Optional Test : Cold Impact )	-	3000	-
20.1(IDENTIFICATION : Manufacturer's Identification)	-	200	-
20.2(IDENTIFICATION : Cable Identification)	-	200	-
20.3(IDENTIFICATION : Cable Code)	-	200	-
5.1.1(Non-magnetic Metallic Tape for SingleCore Unscreened and Unarmoured Cables)	-	200	-

06 Jun, 2027

-
Included w.e.f. 20.12.2023. Size: 25 to 630 sqmm

10672

The Synthetic and Art Silk Mills' Research Association (SASMIRA), MUMBAI

7175004

IS 17349 (2020)

Medical textiles – Shoe covers – Specification

8400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Workmanship and finish)	-	200	-
5.2 - Table 1 - (i)(Cleanliness - Microbial)	-	2000	-
5.2 - Table 1 - (ii)(Tensile Strength)	-	1000	-
5.2 - Table 1 - (iii)(Bursting Strength)	-	800	-
6(Packing)	-	200	-
7(Marking)	-	200	-
5(Requirements)	-	0	-
5.1(Workmanship and Finish)	-	200	-
5.2- Table 1- i)(Cleanliness – Microbial)	-	2000	-
5.2- Table 1- ii)(Tensile strength)	-	1000	-
5.2- Table 1- iii)(Bursting strength)	-	800	-
6(Packing)	-	0	-
7(Marking)	-	0	-

14 Dec, 2026

-
-

10673

The Synthetic and Art Silk Mills' Research Association (SASMIRA), MUMBAI

7175004

IS 17354 (2020)

Medical textiles – Dental bib/Napkins – Specification

9200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause No. 4(Manufacture)	-	200	-
Clause No. 5.1(Hygenic Condition)	-	200	-
Clause No. 5.2 (i)(Waterproofness)	-	500	-
Clause No. 5.2 (ii)(Cleanliness – Microbial (CFU/100 cm))	-	2000	-
Clause No. 5.2 (iii)(Tensile strength (dry and wet))	-	1000	-
Clause No. 5.2 (iv)-a(Absorption, Sinking Time)	-	400	-
5.1(REQUIREMENTS - Workmanship and Finish)	-	200	-
5.2-Table 1- i)(Performance Requirements - Waterproofness)	-	500	-
5.2-Table 1- ii)(Performance Requirements - Cleanliness – Microbial (CFU/100 cm))	-	2000	-
5.2-Table 1- iii)(Performance Requirements - Tensile strength (dry and wet), N Min)	-	1000	-
5.2-Table 1- iv)(Performance Requirements - Absorption)	-	400	-
6(PACKING)	-	200	-
7(MARKING)	-	200	-
Clause No. 5.2 (iv)-b(Absorption, Water holding capacity)	-	400	-

14 Dec, 2026

-
-

10674

The Synthetic and Art Silk Mills' Research Association (SASMIRA), MUMBAI

7175004

IS 17514 (2021)

Reusable Sanitary PadSanitary Napkin Period panties Specification

16200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Material- Cover/Top sheet)	-	200	-
3.2(Material- Absorbent Core)	-	200	-
3.3(Material- Bottom Layer)	-	200	-
4.0(Manufacturing , workmanship and finish)	-	200	-
5.0(Fastening Mechanism)	-	200	-
6.0(Sizes:- Pad Length and Pad Width (For Absorbent core only))	-	400	-
7.0(Washing , Drying And Handling Instruction)	-	1000	-
8 & 11.2.4, Table 1, (i)(Colour Fastness to Rubbing)	-	250	-
8 & 11.2.4, Table 1, (ii)(Colour Fastness to Perspiration (Acidic & Alkaline))	-	400	-
8 & 11.2.4, Table 1, (iii)(Colour Fastness to Washing)	-	400	-
9.1(pH Value)	-	300	-
9.2(Ability to Withstand Pressure after Absorption)	-	1000	-
9.3.1(Bacterial and Fungal Bioburden)	-	2000	-
9.3.2(Test for Common Skin Pathogen -Staphylococcus Aureus)	-	500	-
12.0(Marking & Packing)	-	200	-
13.0(Marking & Packing)	-	200	-
Clause No. 6(Pad length and width)	-	400	-
Clause No. 8, Table No. 1, (i)(Colour fastness to rubbing of fabric)	-	250	-
Clause No. 8, Table No. 1, (ii)(Colour fastness to perspiration (acidic and alkaline))	-	400	-
Clause No. 8, Table No. 1, (iii)(Colour fastness to washing)	-	400	-
Clause No. 9.1(pH Value)	-	300	-
Clause No. 9.2(Ability to Withstand Pressure after Absorption)	-	1000	-
Clause No. 9.3(Hygiene Testing Requirement)	-	2000	-
Clause No. 9.3.1(Bacterial and Fungal Bioburden)	-	500	-
Clause No. 9.3.2(Test for Common Skin Pathogen — Staphylococcus Aureus)	-	2800	-
Clasue No. 10(Anti-Bacterial Activity Value)	-	500	-

14 Dec, 2026

-
Clause 9.5 (Phthalate Test) has been added in the standard through amendment no. 3

10675

Quality Testing & Research Lab, Gautam Buddha Nagar

8184006

IS 3735 (1996)

Canvas Shoes, Rubber Sole

40000 View breakup
-

Clause No.	Exclusion	Remark
Cl.4.5 Consolidation Test IS 3400 (Part 5) : 1986 (From the quarter, cut a strip of 25.0 ± 0.5 mm width along the leagth of the boot and of sufficient length to permit separation over a length of 75 mm. Carry out the test on two test pieces (one from each odd) at the rate of traverse of 100± 10mm per minute in accordance with IS 3400 (Part 5): 1986 or Static Dead Load Method as given in Annex C. The individual adhesion value for consolidation test shall not be less than 30N (3.0 kgf) for each of the teat piecea (see Note under 4.4).')	-	-
4.1.1 Upper, Sl No. (i) of Table 1(The upper shall consist of over layer of cotton, manmade or blended conforming' to the requirements given in Sl No. (i) of Table 1 as an overlayer and cotton drill conforming to the requirements given in Sl No. (ii) of Table 1, as an inner layer or lining. The two fabrics shall be firmly adhered together with rubber compound. )	-	-
Cl.4.1.1.1 Colour fastness(The dyed fabrics prescribed in 4.1.1 shall be fast todaylight and mechanical washing. Fastness to daylight shall be of rating 4 or better, when tested in accordance with IS 686 : 1985 or IS 2454: 1985. However in case of dispute the method prescribed in IS 686 : 1985 shall be considered as referee method.)	-	-
Cl.4.1.2 Binding Material(IS 1954 : 1990) (IS1969 : 1985)(Cotton tape NEWAR used as binding material shall conform to the requirements prescribed in col 3 of Table 2, when tested in accordance with the methods referred to in col 4 of the table.)	-	-
Cl.4.1.2.1 Anmex B.(Cotton, manmade or blended shall be used as binding material.' 'Coloured cotton tapes shall have fastness to day light of rating as and if agreed to between the purchaser and the supplier when tested in accordance with IS 686 : 1985. The black tapes shall be free from sulphur dyes when tested in accordance with Annex B.')	-	-
Cl.4.1.3.1( Sewing thread cotton, manmade or blended shall be used for stitching of upper. For cotton variety thread shall conform to variety No. 28 of IS 1720. Polyester variety thread shall conform to variety No. 9 of IS 9543. Any other suitable thread shall have breaking load not less than above referred requirement of specification. Sewing thread cotton, manmade or blended shall be used for binding of upper. For cotton variety thread shall conform to variety No. 32 of IS 1720. Polyester variety thread shall conform to variety No. 5 of IS 9543. Any other suitable thread shall have breaking load not less than above referred requirement of specification.')	-	-
Cl.4.1.3.2 (IS 2454 : 1985) IS 765 : 1979 IS 971 : 1966( The colour of the threads shall be as agreedto between the purchaser and the supplier. The dyed threads shall conform to the following requirements or IS 686 : 1985'.)	-	-
Cl.4.1.4(.Brass, steel or aluminium eyelets of 7.5 mm diameter and wall thickness 0.30 to 0.35 mm shall be used.')	-	-
Cl.4.1.5 Laces( The shoes shall be provided with fabric braided laces either matching the shade of the upper or black or The length of the lace shall be 60 ± 3 cm )	-	-
Cl.4.1.5 Laces(and shallhave the breaking strength of not less than 250 N when tested between 18 cm grips in accordance with IS 1969 : 1985, the rate of traverse of power actuated grip being 300 mm/min.)	-	-
Cl.4.1.5 Laces Annex B(In case the laces are black, the same shall pass the test for freedom from sulpher dyes when tested in accordance with Annex B. The two ends of the lace shall be provided with suitable metal or plastic tips.)	-	-
Cl.4.1.6 Rubber Components(The rubber components shall conform to the requirements given in Table 4, when tested from finished boots.However in case it is not possible to cut the test pieces from the made up boots then 4.1.5.3 of IS 13695 : 1993 shall be followed.')	-	-
Cl.4.1.6.2 Ageing col 4 of Table 5.(The shoes shall be also aged at 70 ± 1°C for 168 h, on completion of which the test pieces taken from the shoes shall conform to the physical requirements prescribed in col 4 of Table 5. )	-	-
Cl.4.1.6.2 Ageing (None of the rubber components of the shoes shall show any sign of tackiness or crack developed after ageing, when examined visually)	-	-
Cl.4.1.6.3 Thickness of components in Table 6.(Individual components of the shoes shall comply with the thickness and material requirements prescribed in Table 6.)	-	-
CL.4.2 Shape and Design IS 1638 : 1969(Cl 4.2.1 The shoes shall be made according to design and pattern as agreed to between the purchaser and the supplier. Size and fittings of the shoes shall be in accordance with IS 1638 : 1969 unless otherwise specified by the purchaser.)	-	-
Cl.4.2.2( The recommended design of canvas shoes is shown in Fig. 1.)	-	-
Cl.4.3 Construction Cl 4.3.1( The upper shall be stitched on a lock stitch machine and the number of stitches shall be 30 to 40 per dm.)	-	-
Cl.'4.3.2( Back of the upper shall be reinforced with a strip of upper material when there is a seam.')	-	-
Cl.4.3.3( The counter shall be stitched at the back, set from bottom of lining and bound flat on top edge with white/scoured binding material cut in bias and formed as a tape. T )	-	-
Cl.4.3.3(he number of stitches shall be 30 to 40 per decimetre. The counter binding shall meet the binding of the upper at the centre top edge of the heel.)	-	-
Cl.4.3.3(The edges of quarter shall be bound with dyed cotton binding material or matching to the colour of the upper, cut in bias and formed as a tape.)	-	-
Cl.4.3.4 (The vantp shall be strengthened with a rubber toe-cap (see Fig. 1).)	-	-
Cl.4.3.5( Five pairs of eyelets shall be fitted in each shoe. The eyelets shall be properly clenched without any distortion. It shall properly match the colour of the upper canvas, or as agreed to between the purchaser and the supplier.)	-	-
Cl.4.3.6( The shoes shall be free from folds, wrinkles in the upper, blisters, embedded foreign matters and excessive surface markings. In appearance, general workmanship, finish and all other respects, not defined in the standard, the shoes shall be similar to the sample approved by the purchaser, if any)	-	-
CL.4.3.7( The soles shall be of even substance and ofone layer only.)	-	-
Cl.4.3.8( A rubber foxing shall be fixed all round the sole and heel. The colour shall be as agreed to between the purchaser and the supplier. )	-	-
Cl.4.3.8(The foxing, not less than 18 mm wide, shall not extend beyond the edges of the sole at the bottom)	-	-
Cl.4.4 Adhesion Test(From the upper-foxing portion where it is adhered to the canvas, parallel to the waist of sole, cut a strip of length 100 mm and width 8 mm. Separate out the plies initially by breaking the bond to a length of about 75 mm. Carry out the test on two specimens in accordance with IS 3400 (Part 5) : 1986. There shall be no further separation within 1 minute at a load of 1 kg for each of the two specimens.)	-	-
CL.4.6 Mass(The mass of one pair of finished shoes of size 8 shall not exceed 750 g with an increase or decrease of 25 g for each bigger or smaller size respectively)	-	-
Cl.4.5 Consolidation Test IS 3400 (Part 5) : 1986 (From the quarter, cut a strip of 25.0 ± 0.5 mm width along the leagth of the boot and of sufficient length to permit separation over a length of 75 mm. Carry out the test on two test pieces (one from each odd) at the rate of traverse of 100± 10mm per minute in accordance with IS 3400 (Part 5): 1986 or Static Dead Load Method as given in Annex C. The individual adhesion value for consolidation test shall not be less than 30N (3.0 kgf) for each of the teat piecea (see Note under 4.4).')	-	-
4.1.1 Upper, Sl No. (i) of Table 1(The upper shall consist of over layer of cotton, manmade or blended conforming' to the requirements given in Sl No. (i) of Table 1 as an overlayer and cotton drill conforming to the requirements given in Sl No. (ii) of Table 1, as an inner layer or lining. The two fabrics shall be firmly adhered together with rubber compound. )	-	-
Cl.4.1.1.1 Colour fastness(The dyed fabrics prescribed in 4.1.1 shall be fast todaylight and mechanical washing. Fastness to daylight shall be of rating 4 or better, when tested in accordance with IS 686 : 1985 or IS 2454: 1985. However in case of dispute the method prescribed in IS 686 : 1985 shall be considered as referee method.)	-	-
Cl.4.1.2 Binding Material(IS 1954 : 1990) (IS1969 : 1985)(Cotton tape NEWAR used as binding material shall conform to the requirements prescribed in col 3 of Table 2, when tested in accordance with the methods referred to in col 4 of the table.)	-	-
Cl.4.1.2.1 Anmex B.(Cotton, manmade or blended shall be used as binding material.' 'Coloured cotton tapes shall have fastness to day light of rating as and if agreed to between the purchaser and the supplier when tested in accordance with IS 686 : 1985. The black tapes shall be free from sulphur dyes when tested in accordance with Annex B.')	-	-
Cl.4.1.3.1( Sewing thread cotton, manmade or blended shall be used for stitching of upper. For cotton variety thread shall conform to variety No. 28 of IS 1720. Polyester variety thread shall conform to variety No. 9 of IS 9543. Any other suitable thread shall have breaking load not less than above referred requirement of specification. Sewing thread cotton, manmade or blended shall be used for binding of upper. For cotton variety thread shall conform to variety No. 32 of IS 1720. Polyester variety thread shall conform to variety No. 5 of IS 9543. Any other suitable thread shall have breaking load not less than above referred requirement of specification.')	-	-
Cl.4.1.3.2 (IS 2454 : 1985) IS 765 : 1979 IS 971 : 1966( The colour of the threads shall be as agreedto between the purchaser and the supplier. The dyed threads shall conform to the following requirements or IS 686 : 1985'.)	-	-
Cl.4.1.4(.Brass, steel or aluminium eyelets of 7.5 mm diameter and wall thickness 0.30 to 0.35 mm shall be used.')	-	-
Cl.4.1.5 Laces( The shoes shall be provided with fabric braided laces either matching the shade of the upper or black or The length of the lace shall be 60 ± 3 cm )	-	-
Cl.4.1.5 Laces(and shallhave the breaking strength of not less than 250 N when tested between 18 cm grips in accordance with IS 1969 : 1985, the rate of traverse of power actuated grip being 300 mm/min.)	-	-
Cl.4.1.5 Laces Annex B(In case the laces are black, the same shall pass the test for freedom from sulpher dyes when tested in accordance with Annex B. The two ends of the lace shall be provided with suitable metal or plastic tips.)	-	-
Cl.4.1.6 Rubber Components(The rubber components shall conform to the requirements given in Table 4, when tested from finished boots.However in case it is not possible to cut the test pieces from the made up boots then 4.1.5.3 of IS 13695 : 1993 shall be followed.')	-	-
Cl.4.1.6.2 Ageing col 4 of Table 5.(The shoes shall be also aged at 70 ± 1°C for 168 h, on completion of which the test pieces taken from the shoes shall conform to the physical requirements prescribed in col 4 of Table 5. )	-	-
Cl.4.1.6.2 Ageing (None of the rubber components of the shoes shall show any sign of tackiness or crack developed after ageing, when examined visually)	-	-
Cl.4.1.6.3 Thickness of components in Table 6.(Individual components of the shoes shall comply with the thickness and material requirements prescribed in Table 6.)	-	-
CL.4.2 Shape and Design IS 1638 : 1969(Cl 4.2.1 The shoes shall be made according to design and pattern as agreed to between the purchaser and the supplier. Size and fittings of the shoes shall be in accordance with IS 1638 : 1969 unless otherwise specified by the purchaser.)	-	-
Cl.4.2.2( The recommended design of canvas shoes is shown in Fig. 1.)	-	-
Cl.4.3 Construction Cl 4.3.1( The upper shall be stitched on a lock stitch machine and the number of stitches shall be 30 to 40 per dm.)	-	-
Cl.'4.3.2( Back of the upper shall be reinforced with a strip of upper material when there is a seam.')	-	-
Cl.4.3.3( The counter shall be stitched at the back, set from bottom of lining and bound flat on top edge with white/scoured binding material cut in bias and formed as a tape. T )	-	-
Cl.4.3.3(he number of stitches shall be 30 to 40 per decimetre. The counter binding shall meet the binding of the upper at the centre top edge of the heel.)	-	-
Cl.4.3.3(The edges of quarter shall be bound with dyed cotton binding material or matching to the colour of the upper, cut in bias and formed as a tape.)	-	-
Cl.4.3.4 (The vantp shall be strengthened with a rubber toe-cap (see Fig. 1).)	-	-
Cl.4.3.5( Five pairs of eyelets shall be fitted in each shoe. The eyelets shall be properly clenched without any distortion. It shall properly match the colour of the upper canvas, or as agreed to between the purchaser and the supplier.)	-	-
Cl.4.3.6( The shoes shall be free from folds, wrinkles in the upper, blisters, embedded foreign matters and excessive surface markings. In appearance, general workmanship, finish and all other respects, not defined in the standard, the shoes shall be similar to the sample approved by the purchaser, if any)	-	-
CL.4.3.7( The soles shall be of even substance and ofone layer only.)	-	-
Cl.4.3.8( A rubber foxing shall be fixed all round the sole and heel. The colour shall be as agreed to between the purchaser and the supplier. )	-	-
Cl.4.3.8(The foxing, not less than 18 mm wide, shall not extend beyond the edges of the sole at the bottom)	-	-
Cl.4.4 Adhesion Test(From the upper-foxing portion where it is adhered to the canvas, parallel to the waist of sole, cut a strip of length 100 mm and width 8 mm. Separate out the plies initially by breaking the bond to a length of about 75 mm. Carry out the test on two specimens in accordance with IS 3400 (Part 5) : 1986. There shall be no further separation within 1 minute at a load of 1 kg for each of the two specimens.)	-	-
CL.4.6 Mass(The mass of one pair of finished shoes of size 8 shall not exceed 750 g with an increase or decrease of 25 g for each bigger or smaller size respectively)	-	-
Cl.4.5 Consolidation Test IS 3400 (Part 5) : 1986 (From the quarter, cut a strip of 25.0 ± 0.5 mm width along the leagth of the boot and of sufficient length to permit separation over a length of 75 mm. Carry out the test on two test pieces (one from each odd) at the rate of traverse of 100± 10mm per minute in accordance with IS 3400 (Part 5): 1986 or Static Dead Load Method as given in Annex C. The individual adhesion value for consolidation test shall not be less than 30N (3.0 kgf) for each of the teat piecea (see Note under 4.4).')	-	-
4.1.1 Upper, Sl No. (i) of Table 1(The upper shall consist of over layer of cotton, manmade or blended conforming' to the requirements given in Sl No. (i) of Table 1 as an overlayer and cotton drill conforming to the requirements given in Sl No. (ii) of Table 1, as an inner layer or lining. The two fabrics shall be firmly adhered together with rubber compound. )	-	-
Cl.4.1.1.1 Colour fastness(The dyed fabrics prescribed in 4.1.1 shall be fast todaylight and mechanical washing. Fastness to daylight shall be of rating 4 or better, when tested in accordance with IS 686 : 1985 or IS 2454: 1985. However in case of dispute the method prescribed in IS 686 : 1985 shall be considered as referee method.)	-	-
Cl.4.1.2 Binding Material(IS 1954 : 1990) (IS1969 : 1985)(Cotton tape NEWAR used as binding material shall conform to the requirements prescribed in col 3 of Table 2, when tested in accordance with the methods referred to in col 4 of the table.)	-	-
Cl.4.1.2.1 Anmex B.(Cotton, manmade or blended shall be used as binding material.' 'Coloured cotton tapes shall have fastness to day light of rating as and if agreed to between the purchaser and the supplier when tested in accordance with IS 686 : 1985. The black tapes shall be free from sulphur dyes when tested in accordance with Annex B.')	-	-
Cl.4.1.3.1( Sewing thread cotton, manmade or blended shall be used for stitching of upper. For cotton variety thread shall conform to variety No. 28 of IS 1720. Polyester variety thread shall conform to variety No. 9 of IS 9543. Any other suitable thread shall have breaking load not less than above referred requirement of specification. Sewing thread cotton, manmade or blended shall be used for binding of upper. For cotton variety thread shall conform to variety No. 32 of IS 1720. Polyester variety thread shall conform to variety No. 5 of IS 9543. Any other suitable thread shall have breaking load not less than above referred requirement of specification.')	-	-
Cl.4.1.3.2 (IS 2454 : 1985) IS 765 : 1979 IS 971 : 1966( The colour of the threads shall be as agreedto between the purchaser and the supplier. The dyed threads shall conform to the following requirements or IS 686 : 1985'.)	-	-
Cl.4.1.4(.Brass, steel or aluminium eyelets of 7.5 mm diameter and wall thickness 0.30 to 0.35 mm shall be used.')	-	-
Cl.4.1.5 Laces( The shoes shall be provided with fabric braided laces either matching the shade of the upper or black or The length of the lace shall be 60 ± 3 cm )	-	-
Cl.4.1.5 Laces(and shallhave the breaking strength of not less than 250 N when tested between 18 cm grips in accordance with IS 1969 : 1985, the rate of traverse of power actuated grip being 300 mm/min.)	-	-
Cl.4.1.5 Laces Annex B(In case the laces are black, the same shall pass the test for freedom from sulpher dyes when tested in accordance with Annex B. The two ends of the lace shall be provided with suitable metal or plastic tips.)	-	-
Cl.4.1.6 Rubber Components(The rubber components shall conform to the requirements given in Table 4, when tested from finished boots.However in case it is not possible to cut the test pieces from the made up boots then 4.1.5.3 of IS 13695 : 1993 shall be followed.')	-	-
Cl.4.1.6.2 Ageing col 4 of Table 5.(The shoes shall be also aged at 70 ± 1°C for 168 h, on completion of which the test pieces taken from the shoes shall conform to the physical requirements prescribed in col 4 of Table 5. )	-	-
Cl.4.1.6.2 Ageing (None of the rubber components of the shoes shall show any sign of tackiness or crack developed after ageing, when examined visually)	-	-
Cl.4.1.6.3 Thickness of components in Table 6.(Individual components of the shoes shall comply with the thickness and material requirements prescribed in Table 6.)	-	-
CL.4.2 Shape and Design IS 1638 : 1969(Cl 4.2.1 The shoes shall be made according to design and pattern as agreed to between the purchaser and the supplier. Size and fittings of the shoes shall be in accordance with IS 1638 : 1969 unless otherwise specified by the purchaser.)	-	-
Cl.4.2.2( The recommended design of canvas shoes is shown in Fig. 1.)	-	-
Cl.4.3 Construction Cl 4.3.1( The upper shall be stitched on a lock stitch machine and the number of stitches shall be 30 to 40 per dm.)	-	-
Cl.'4.3.2( Back of the upper shall be reinforced with a strip of upper material when there is a seam.')	-	-
Cl.4.3.3( The counter shall be stitched at the back, set from bottom of lining and bound flat on top edge with white/scoured binding material cut in bias and formed as a tape. T )	-	-
Cl.4.3.3(he number of stitches shall be 30 to 40 per decimetre. The counter binding shall meet the binding of the upper at the centre top edge of the heel.)	-	-
Cl.4.3.3(The edges of quarter shall be bound with dyed cotton binding material or matching to the colour of the upper, cut in bias and formed as a tape.)	-	-
Cl.4.3.4 (The vantp shall be strengthened with a rubber toe-cap (see Fig. 1).)	-	-
Cl.4.3.5( Five pairs of eyelets shall be fitted in each shoe. The eyelets shall be properly clenched without any distortion. It shall properly match the colour of the upper canvas, or as agreed to between the purchaser and the supplier.)	-	-
Cl.4.3.6( The shoes shall be free from folds, wrinkles in the upper, blisters, embedded foreign matters and excessive surface markings. In appearance, general workmanship, finish and all other respects, not defined in the standard, the shoes shall be similar to the sample approved by the purchaser, if any)	-	-
CL.4.3.7( The soles shall be of even substance and ofone layer only.)	-	-
Cl.4.3.8( A rubber foxing shall be fixed all round the sole and heel. The colour shall be as agreed to between the purchaser and the supplier. )	-	-
Cl.4.3.8(The foxing, not less than 18 mm wide, shall not extend beyond the edges of the sole at the bottom)	-	-
Cl.4.4 Adhesion Test(From the upper-foxing portion where it is adhered to the canvas, parallel to the waist of sole, cut a strip of length 100 mm and width 8 mm. Separate out the plies initially by breaking the bond to a length of about 75 mm. Carry out the test on two specimens in accordance with IS 3400 (Part 5) : 1986. There shall be no further separation within 1 minute at a load of 1 kg for each of the two specimens.)	-	-
CL.4.6 Mass(The mass of one pair of finished shoes of size 8 shall not exceed 750 g with an increase or decrease of 25 g for each bigger or smaller size respectively)	-	-
4.8(Adhesion )	-	-
4.7(Consolidation test )	-	-
4.6(Mass )	-	-
4.5(Finish )	-	-
4.4(Contruction )	-	-
4.3(Leg Height )	-	-
4.2(Design )	-	-
4.1.6.2(Thickness of components )	-	-
4.1.6.2(Ageing)	-	-
4.1.6.2(Elongation at break after ageing )	-	-
4.1.6.2(Tensile after ageing )	-	-
4.1.6(Compression set )	-	-
4.1.6(Elongation at break )	-	-
4.1.6(Tensile strength)	-	-
4.1.6(Hardness (after accelerated ))	-	-
4.1.6(Flexing resistance test)	-	-
4.1.6(Hardness )	-	-
4.1.6(Relative density)	-	-
4.1.5(Sulpher dyes content )	-	-
4.1.5(Breaking Load )	-	-
4.1.5(Length )	-	-
4.1.4(Thickness)	-	-
4.1.4(Size )	-	-
4.1.3(Color fastness to perspiration)	-	-
4.1.3(Colorfastness to washing)	-	-
4.1.3(Colorfastness to light )	-	-
4.1.3(Single thread breaking load)	-	-
4.1.3(Construction )	-	-
4.1.2(Colorfastness to light )	-	-
4.1.2(Colorfastness to washing)	-	-
4.1.2(Breaking Strength )	-	-
4.1.2(Width )	-	-
4.1.1.2(Colorfastness to washing)	-	-
4.1.1.1(Colorfastness to light )	-	-
4.1.1 (Drill) (End & Picks/dm)	-	-
4.1.1 (Drill) (Colorfastness to light )	-	-
4.1.1 (canvas )(End & Picks/dm)	-	-
4.1.1 (canvas )(Breaking Load )	-	-
5, 5.1, Cl. 5.2, Cl. 5.2.1, Cl. 5.2.1.1(Packing and marking)	-	-
" CL. 5.1, Cl. 5.2, Cl. 5.2.1, Cl. 5.2.1.1(Packing and marking ")	-	-

23 Feb, 2028

-
-

10676

Unique Test House LLP

9134536

IS 2202 : Part 2 (2022)

WOODEN FLUSH DOOR SHUTTERS SOLID CORE TYPE SPECIFICATION PART 2 PARTICLE BOARD HIGH DENSITY FIBRE BOARD MEDIUM DENSITY FIBRE BOARD AND HARDBOARD FACE PANELS Fourth Revision

ALL AS PER IS

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause No - 6.1(Timber)	-	5000	-
Clause No -6.2(Alternative Materials (LVL)	-	2500	-
Clause No -6.2(Alternative Materials veneer laminated lumber (VLL))	-	2500	-
Clause No -6.2(Alternative Materials medium density fibre board (MDF))	-	2500	-
Clause No -6.2(Alternative Materials -plywood)	-	2500	-
Clause No -6.2(BWP grade flush door shutter)	-	5000	-
Clause No -6.3.1("Face Panels: Particle Board MDF/ HDF Fibre Hardboard")	-	2500	-
Clause No -6.4(Adhesive)	-	9000	-
Clause No -7.1(Construction)	-	500	-
Clause No - 7.3(" MDF board or HDF board ")	-	5000	-
Clause No -9.2("Workmanship and finish")	-	500	-
Clause No -10.1(tests for flush door shutters)	-	20000	-
Clause No -10.2(End Immersion Test)	-	1500	-
Clause No -10.3(Glue Adhesion Test)	-	1000	-
Clause No -11(SAMPLING AND CRITERIA FOR CONFORMITY)	-	100	-
Clause No -12("ADDITIONAL REQUIREMENTS FOR ECO MARK")	-	100	-
Clause No - 6.1(Timber)	-	2500	-
Clause No -6.2(Alternative Materials (LVL)	-	2500	-
Clause No -6.2(Alternative Materials medium density fibre board (MDF))	-	500	-
Clause No -6.2(Alternative Materials -plywood)	-	500	-
Clause No -6.2(BWP grade flush door shutter)	-	500	-
Clause No -6.3.1("Face Panels: Particle Board MDF/ HDF Fibre Hardboard")	-	500	-
Clause No -6.4(Adhesive)	-	9000	-
Clause No -7.1(Construction)	-	500	-
Clause No - 7.3(" MDF board or HDF board ")	-	500	-
Clause No -9.2("Workmanship and finish")	-	200	-
Clause No -10.1(tests for flush door shutters)	-	20000	-
Clause No -10.2(End Immersion Test)	-	1500	-
Clause No -10.3(Glue Adhesion Test)	-	500	-
Clause No -11(SAMPLING AND CRITERIA FOR CONFORMITY)	-	1500	-
Clause No -12("ADDITIONAL REQUIREMENTS FOR ECO MARK")	-	1000	-
Clause No -6.2(Alternative Materials veneer laminated lumber (VLL))	-	1000	-
5(SIZES AND TOLERANCES)	-	500	-
6.5(The swelling in thickness of the particle board, MDF and HDF board for core)	-	100	-

07 Sep, 2028

-
Included w.e.f. 04.03.2024 Garde- MR/BWP, Type-BDPV/BNP/BNPV/PDPV/PNP/PNPV/MDPV/MNP/MNPV Range- Length - up to 2450mm Width-up to 1225mm Thickness- up to 60mm Designation- 8DS20 to 12DET21

10677

The Synthetic and Art Silk Mills' Research Association (SASMIRA), MUMBAI

7175004

IS 15907 (2010)

Agro textiles – High density polyethylene (HDPE) woven beds for vermiculture – Specification

25600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.3(Cord Beading - IS 15907)	-	400	-
5.1(MANUFACTURE- IS 15907)	-	900	-
5.2.1(Lamination- IS 15907)	-	200	-
5.2.1(Thickness of coating film- method A of IS 13162 (Part 3))	-	200	-
5.2.1(Lamination- IS 15907)	-	200	-
5.2.2(Lamination- IS 15907)	-	200	-
5.2.2(Lamination- IS 15907)	-	200	-
5.2.2(coating thickness of the sandwich lamination- method A of IS 13162 (Part 3))	-	200	-
5.3.1(Construction- IS 15907)	-	200	-
5.3.1(Construction- IS 15907)	-	200	-
5.3.1(Construction- IS 15907)	-	200	-
5.3.1(The width of the hem - IS 15907)	-	200	-
5.3.1(Construction- IS 15907)	-	200	-
5.3.1(Construction- IS 15907)	-	200	-
5.3.1(Construction- IS 15907)	-	200	-
5.3.1(Construction- IS 15907)	-	200	-
5.3.2(Construction- IS 15907)	-	200	-
5.3.2(Construction- IS 15907)	-	200	-
5.3.2(Construction- IS 15907)	-	200	-
5.3.2(Finished width of pocket - IS 15907)	-	200	-
5.3.2(Construction- IS 15907)	-	200	-
5.4(Bonding- IS 15907)	-	200	-
6- Table 1- SL.No (i)(Mass)	-	200	-
6- Table 1- SL.No (ii)(Breaking strength before UV exposure,warp - IS 1969 )	-	500	-
6- Table 1- SL.No (ii)(Breaking strength before UV exposure,weft - IS 1969 )	-	0	-
6- Table 1- SL.No (iii)(Elongation at break of fabric- IS 1969)	-	0	-
6- Table 1- SL.No (iv)(Retention of breaking strength after UV exposure, - Annex B of IS 15907 and IS 1969)	-	10500	-
6- Table 1- SL.No (v)(Welded seam strength before UV exposure- IS 1969)	-	700	-
6- Table 1- SL.No (vi)(Welded seam strength after UV exposure- Annex B of IS 15907 and IS 1969)	-	700	-
6- Table 1- SL.No (vii)(Tear strength, Warp - Method A2 of IS 7016 (Part 3))	-	500	-
6- Table 1- SL.No (vii)(Tear strength, Weft - Method A2 of IS 7016 (Part 3))	-	0	-
6- Table 1- SL.No (viii)(Puncture strength - Annex C of IS 15907)	-	700	-
6- Table 1- SL.No (ix)(Environmental stress cracking test - Annex D of IS 15907)	-	1000	-
6- Table 1- SL.No (x)(Resistance to chemicals, change in the mass - Annex E of IS 15907)	-	1200	-
6- Table 1- SL.No (xi)(Colour fastness to artificial light -IS 2454)	-	1200	-
6- Table 1- SL.No (xii)(Bursting pressure-IS 1966)	-	400	-
6.1(Length -IS 15907)	-	200	-
6.1(Width - IS 15907)	-	200	-
6.1(Height - IS 15907)	-	200	-
6.2(Water Proofness,IS 7941)	-	500	-
6.2(Water Proofness, IS 7940)	-	500	-
4.1(Identification)	-	500	-
4.1(Linear Density)	-	400	-
4.1(Width)	-	200	-

14 Dec, 2026

-
-

10678

BIS, Central Laboratory (CL)

None

IS 2347 (2023)

DOMESTIC PRESSURE COOKER ï¿½ SPECIFICATION

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Gross capacity)	-
4.2 (Body Capacity)	-
5.1 (Body, Lid, Containers and Grid)	-
5.1.2 (Body and Lid )	-
5.1.3 (Stainless steel pressure cooker)	-
5.1.4 (Aluminium cooker )	-
5.2 (Safety Relief Device)	-
5.3 (Gasket)	-
5.4 (Handles and Knobs)	-
5.5 (Pressure Regulating Device )	-
5.6 (Vent Seal Pin for Pressure Regulating Device )	-
5.7 (Vent Pipe )	-
5.8 (Vent Pipe Nut )	-
5.9 (Spring )	-
5.1 (Material of Rim )	-
5.11 (Visual Pressure Indicator)	-
5.12 (Gasket Release System)	-
6 (Construction)	-
7 (Workmanship and Finish )	-
8.1 (Air Pressure Test )	-
8.2 (Proof Pressure Test )	-
8.3 (Operating Test for Pressure Regulating Device )	-
8.4 (Test for Safety Relief Device )	-
8.5 (Bursting Pressure Test )	-
8.6 (Test for Removal of Lid under Pressure )	-
8.7 (Test for Spring Loaded Mechanism )	-
8.8 (Composite Cooker Base )	-
8.9 (Aluminium induction compatible Base )	-
8.1 (Handles of cooker )	-
8.11 (External Coating)	-
8.12 (Internal Coating )	-
8.13 (Integral electrical heating)	-
8.14 (Ply construction cooker Body )	-
8.15.1 (Fragmentation Test )	-
8.15.2 (Ball Drop Test )	-
8.15.3 (Thermal Shock Test )	-
8.15.4 (Free Fall Test)	-
8.17 (Test for Effectiveness for Induction Bottom)	-
11 (Marking )	-
12 (Packing )	-
4 (Capacity)	-
4.2 (Body Capacity)	-
5.1.1 (Body, Lid, Containers and Grid)	-
5.1.2 (Body, Lid, Containers and Grid)	-
5.1.3 (Body, Lid, Containers and Grid)	-
5.1.4 (Body, Lid, Containers and Grid)	-
5.1.5 (Body, Lid, Containers and Grid)	-
5.2.1 (Destructive Type Safety Relief Device)	-
5.2.2 (Resettable Type Safety Relief Device)	-
5.3 (Gasket)	-
5.4 (Handles and Knobs)	-
5.5 (Pressure Regulating Device)	-
5.6 (Vent Seal Pin for Pressure Regulating Device)	-
5.7 (Vent Pipe)	-
5.8 (Vent Pipe Nut)	-
5.9 (Spring)	-
5.10 (Spring)	-
5.11 (Visual Pressure Indicator)	-
5.12 (Gasket Release System)	-
6 (CONSTRUCTION)	-
6.1 (Pressure Regulating Device)	-
6.1.1 (Pressure Regulating Device)	-
6.1.1 (Minimum Inside diameter of Vent Pipe.)	-
6.1.2 (Pressure Regulating Device)	-
6.1.3 (Pressure Regulating Device)	-
6.1.4 (Pressure Regulating Device)	-
6.1.5 (Pressure Regulating Device)	-
6.1.6 (Pressure Regulating Device)	-
6.2 (Safety Relief Device)	-
6.2.1 (Safety Relief Device)	-
6.2.2 (Safety Relief Device)	-
6.2.3 (Safety Relief Device)	-
6.3.1 (Temperature Responsive Safety Relief Device)	-
6.3.2 (Temperature Responsive Safety Relief Device)	-
6.3.3 (Temperature Responsive Safety Relief Device)	-
6.4.1 (Handles and Knobs)	-
6.4.1.1 (Handles and Knobs)	-
6.4.2 (Handles and Knobs)	-
6.4.2.1 (Handles and Knobs)	-
6.5 (CONSTRUCTION)	-
6.6 (CONSTRUCTION)	-
6.7 (Internal Level Marking)	-
6.8 (Internal Level Marking)	-
7.1 (WORKMANSHIP AND FINISH)	-
7.2 (WORKMANSHIP AND FINISH)	-
8.17 (Test for Effectiveness for Induction Bottom)	-
8.16 (PRD with chain)	-
8.15.4.2 (Glass lid without rim)	-
8.15.4.1 ("Free Fall Test ( Glass lid with rim) ")	-
8.15.3 (Thermal Shock Test on Tempered Glass lid)	-
8.15.2 (Ball Drop Test on Tempered Glass lid)	-
8.15.1 (Fragmentation Test on Tempered Glass lid)	-
8.14 (3 ply construction cooker body)	-
8.13 (Pressure cooker with integral electrical heating)	-
8.12 (Internal Coating)	-
7.3 (WORKMANSHIP AND FINISH)	-
7.4 (WORKMANSHIP AND FINISH)	-
8.1 (Air Pressure Test)	-
8.2 (Proof Pressure Test)	-
8.3.1 (Operating Test for Pressure Regulating Device)	-
8.4.1 (Test for Safety Relief Device)	-
8.4.2 (Test for Safety Relief Device)	-
8.4.2 NOTE (Test for Safety Relief Device)	-
8.5 (Bursting Pressure Test)	-
8.6.1 (Tests for Removal of Lid under Pressure For Outer Lid Cooker)	-
8.6.2 (Tests for Removal of Lid under Pressure For inner Lid Cooker)	-
8.6.3 (Tests for Removal of Lid under Pressure: For Cooker Fastened by Screw Clamps or Any Other Locking Device)	-
8.6.4 (Tests for Removal of Lid under Pressure in case of electrical pressure cooker)	-
8.7 (Test for Spring Loaded Mechanism)	-
8.8 (Test for stainless steel cookers)	-
8.9 ("For stainless steel, aluminium induction compatible base and 3 ply cooker")	-
8.10 (Testing of Handles of the cooker)	-
8.10 Note 3 (Testing of Handles of the cooker)	-
8.10 Note 4 (Testing of Handles of the cooker)	-
8.10 Note 5 (Testing of Handles of the cooker)	-
8.10 Note 6 (Testing of Handles of the cooker)	-
8.10.1 (Testing of Handles of the cooker)	-
8.11.1 (External Coating)	-

-
-

10679

Sierra Aircon Pvt. Ltd., Gurugram

8163426

IS 1391 : Part 2 (2023)

Room Air Conditioners Specification Part 2 Split Air Conditioners Fourth Revision

Size

626000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Construction )("The air conditioner and its parts shall be constructed with the strength and rigidity adequate for normal conditions of handling, transport, and usage.")	-	0	-
8(RATING AND TEST CONDITIONS)	-	0	Test charges for various tests is charged against each test
8.1(Cooling Test)	-	0	Conditions followed while carrying out cooling capacity test.
8.1.2((Maximum Operating Test Conditions))	-	0	Conditions followed while carrying out Maximum operating test.
8.1.3((Freeze-Up Test Conditions))	-	0	Conditions followed while carrying out freeze-up test.
8.1.4((Enclosure Sweat Test Conditions))	-	0	Conditions followed while carrying out Enclosure Sweat Test Conditions.
8.2((Heating Test))	-	0	Conditions followed while carrying out Heating Test
8.2.1((Heating Capacity Test Conditions))	-	0	Covered under Heating test.
"8.2.2((Heating by Heat Pump Overload Rating Test Conditions (Maximum Heating Performance Test))")	-	0	Conditions followed while carrying out Heating by Heat Pump Overload Rating Test Conditions (Maximum heating performance test).
"8.3((Method of Measurement of Indian Seasonal Energy Efficiency Ratio (ISEER))")	-	0	Carried out along with cooling test
9((PERFORMANCE REQUIREMENTS))	-	0	-
9.1((Variations Allowed in Performance Test Conditions))	-	0	Applied various tests as applicable.
9.2((Safety))	-	0	Carried out as per A3 Refrigerant safety requirements
9.3((Power Factor Test))	-	0	Covered along with Cooling test.
9.4((Maximum Operating Conditions Test))	-	116000	-
9.5((Freeze-Up Tests))	-	116000	-
9.5.3((Air Blockage Test))	-	0	Covered under Freeze-up test.
9.5.4(( Drip Test))	-	0	Covered under Freeze-up test.
9.6((Enclosure Sweat Test))	-	58000	-
9.7((Power Consumption Test for Cooling))	-	0	Covered along with Cooling Capacity test.
9.8((Power Consumption Test for Heating by Heat Pump))	-	0	Covered along with Heating Capacity test.
9.9(( Cooling Capacity Test))	-	116000	Charges cover for Full load and Half load Capacity tests applicable to variable Speed unites. For Fixed speed unites INR 58000/- only as test chargers For unites, above 10500 Watts rated Capacity: Fixed Speed INR 65000/- Variable speed INR 130000/-
9.10((Heating Capacity Test))	-	58000	For Transient test mode, an additional INR 58000/- extra will be charged. For unites, above 10500 Watts rated Capacity INR 65000/- will be charged as test charges.
"9.11((Method of Measurement of Indian Seasonal Energy Efficiency Ratio (ISEER))")	-	0	Method followed while carrying out cooling capacity test.
9.12((Maximum Heating Performance Test))	-	116000	For unites, above 10500 Watts rated Capacity INR 130000/- will be charged as test charges.
9.13((Sound Pressure Test))	-	29000	For unites, above 10500 Watts rated Capacity INR 35000/- will be charged as test charges.
10((CALCULATIONS))	-	0	Followed while carrying out cooling capacity and heating capacity test.
11((INSTRUMENTS))	-	0	Used as per requirement and specifications.
12.1((Classification of Tests))	-	0	-
12.2.2(( Leakage Test))	-	0	mandatory carried out prior to cooling capacity test.
12.2.3((High Voltage Test))	-	5000	-
12.2.4(Leakage Current Test))	-	5000	For unites, above 10500 Watts rated Capacity INR 15000/- will be charged as test charges.
"12.2.5(Provisions for Earthing (Earth Resistance Test)")	-	5000	-
12.3.3(Safety Tests)	-	2000	Charges taken for protection against access to the live parts test.
12.4.1(Performance Test)	-	0	-
12.4.2(Pressure Test or Leakage Test)	-	0	mandatory carried out prior to cooling capacity test.
12.4.3(Leakage Current Test)	-	0	Already covered

31 Mar, 2028

-
Included w.e.f. 05.02.2024 Single or three phase non-ducted split with single stage, two stage, multi-stage, fixed and variable speed air conditioner and heat pumps of rated capacity up to and including 18000 w Exclusion: Cl.5.2 (Electrically Charged Parts), Cl.5.3(Refrigerant Circuit), Cl.5.4(Provision for Earthing), Cl.5.5(Air Filter), Cl.5.6(Temperature Sensing Controls), Cl.5.7(Hermetic Compressors), Cl.5.8(Heat Exchanger), Cl.5.9(Motors), Cl.6(RATING REQUIREMENTS), Cl.7(RATINGS BASED ON FUNCTION), Cl. 12.2.1(General Running Test), Cl. 12.4(Acceptance Test), Cl.13 (MARKING)

10680

ABSOLUTE EXPERTISE TESTING LABORATORY LLP

8176726

IS 302 : Part 2 : Sec 15 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 15 appliances for heating liquids (First Revision)

19000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General requirements)	-	0	-
5(General Conditions of tests)	-	0	-
6.0(Classification)	-	500	-
7(Marking and instructions)	-	500	-
8(Protection against live parts)	-	1000	-
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	0	-
10(POWER INPUT AND CURRENT)	-	1000	-
11(HEATING)	-	1000	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	1000	-
14(TRANSIENT OVERVOLTAGES)	-	1000	-
15(MOISTURE RESISTANCE)	-	1000	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	1000	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	500	-
18(ENDURANCE)	-	0	-
19(ABNORMAL OPERATION)	-	1000	-
20(STABILITY AND MECHANICAL HAZARDS)	-	1000	-
21(MECHANICAL STRENGTH)	-	1000	-
22(CONSTRUCTION)	-	1000	-
23(INTERNAL WIRING)	-	500	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	1000	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	500	-
27(PROVISION FOR EARTHING)	-	1000	-
28(SCREWS AND CONNECTIONS)	-	500	-
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	1000	-
30(RESISTANCE TO HEAT AND FIRE)	-	1000	-
31(RESISTANCE TO RUSTING)	-	1000	-
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	500	-
22.16(Automatic cord reel)	-	500	-
22.47(Water pressure inlet)	-	0	-
22.106(Interlocks)	-	500	-
22.3(Flexing test)	-	1000	-

11 Mar, 2027

-
Exclusion: Cl. 19.11.4.1 (Electrostatic discharges), Cl. 19.11.4.2 (Radiated fields), Cl. 19.11.4.3 (Fast transient bursts), Cl. 19.11.4.4 (Surge immunity test), Cl. 19.11.4.5 (Injected currents), Cl. 19.11.4.6 (Class 3 Voltage dips and interruptions), Cl. 19.11.4.7 (Harmonics), Cl. 24 (COMPONENTS), Cl. 22.32 (Oxygen bomb for rubber material)

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number